mirror of
https://github.com/genesi/linux-legacy.git
synced 2026-07-08 17:56:11 +00:00
Alex Chiang asked me why PARISC was calling pci_bus_add_devices() and pci_bus_assign_resources() in the opposite order from everyone else. No reason and I couldn't see any data dependency. Patch below applies cleanly to 2.6.30-rc2. Later, I suspected the code worked only because no drivers would be loaded/ready until much later in the system initialization sequence. Tested "LBA" code on J6000 (32-bit) and A500 (64-bit SMP) with 2.6.30-rc2. Not tested with any Dino controllers. Not tested with PCI-PCI Bridge (TBD). Reported-by: Alex Chiang <achiang@hp.com> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
/* ** HP VISUALIZE Workstation PCI Bus Defect ** ** "HP has discovered a potential system defect that can affect ** the behavior of five models of HP VISUALIZE workstations when ** equipped with third-party or customer-installed PCI I/O expansion ** cards. The defect is limited to the HP C180, C160, C160L, B160L, ** and B132L VISUALIZE workstations, and will only be encountered ** when data is transmitted through PCI I/O expansion cards on the ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are ** not affected." ** ** REVISIT: "go/pci_defect" link below is stale. ** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/> ** ** Product First Good Serial Number ** C200/C240 (US) US67350000 **B132L+/B180 (US) US67390000 ** C200 (Europe) 3713G01000 ** B180L (Europe) 3720G01000 ** ** Note that many boards were fixed/replaced under a free replacement ** program. Assume a machine is only "suspect" until proven otherwise. ** ** "The pci_check program will also be available as application ** patch PHSS_12295" */