diff --git a/currentProblems.txt b/currentProblems.txt
index cb76a00..33c27f4 100644
--- a/currentProblems.txt
+++ b/currentProblems.txt
@@ -1,5 +1,23 @@
 Don't know where touch input is read
 
+CPU read 8 bits from register 0x0431, PC 0x100815B2.
+CPU read 8 bits from register 0x0420, PC 0x100815B8.
+CPU read 8 bits from register 0x0421, PC 0x100815BE.
+SPI2 transfer, ENABLE:true, XCH:false, IRQ:false, IRQEN:false, BITCOUNT:12
+SPI2 transfer, ENABLE:true, XCH:true, IRQ:false, IRQEN:false, BITCOUNT:12
+SPI2 transfer, ENABLE:true, XCH:false, IRQ:false, IRQEN:false, BITCOUNT:5
+SPI2 transfer, ENABLE:true, XCH:true, IRQ:false, IRQEN:false, BITCOUNT:5
+SPI2 transfer, ENABLE:true, XCH:false, IRQ:false, IRQEN:false, BITCOUNT:16
+SPI2 transfer, ENABLE:true, XCH:true, IRQ:false, IRQEN:false, BITCOUNT:16
+SPI2 transfer, ENABLE:true, XCH:true, IRQ:false, IRQEN:false, BITCOUNT:3
+SPI2 transfer, ENABLE:false, XCH:false, IRQ:false, IRQEN:false, BITCOUNT:1
+CPU read 8 bits from register 0x0431, PC 0x10081A04.
+
+CPU read 8 bits from register 0x0431, PC 0x100815B2.
+CPU read 8 bits from register 0x0420, PC 0x100815B8.
+CPU read 8 bits from register 0x0421, PC 0x100815BE.
+
+
 //copilots SPI touch code
 	case SPIMCONT:
 		db_SPIMCONT.x = value;
diff --git a/src/hardwareRegisters.c b/src/hardwareRegisters.c
index 4c45219..0e10dbc 100644
--- a/src/hardwareRegisters.c
+++ b/src/hardwareRegisters.c
@@ -443,6 +443,8 @@ unsigned int getHwRegister16(unsigned int address){
       case RTCCTL:
       case RTCIENR:
       case ILCR:
+      case SPICONT2:
+      case SPIDATA2:
          //simple read, no actions needed
          return registerArrayRead16(address);
          
diff --git a/src/hardwareRegistersAccessors.c.h b/src/hardwareRegistersAccessors.c.h
index 565811d..c78c89f 100644
--- a/src/hardwareRegistersAccessors.c.h
+++ b/src/hardwareRegistersAccessors.c.h
@@ -213,9 +213,6 @@ static inline void setSpiCont2(uint16_t value){
    //unsure if ENABLE can be set at the exact moment of write or must be set before write, currently allow both
    //important bits are ENABLE, XCH, IRQ, IRQEN and BITCOUNT
    //uint16_t oldSpiCont2 = registerArrayRead16(SPICONT2);
-
-   debugLog("SPI2 transfer, ENABLE:%s, XCH:%s, IRQ:%s, IRQEN:%s, BITCOUNT:%d\n", boolString(value & 0x0200), boolString(value & 0x0100), boolString(value & 0x0080), boolString(value & 0x0400), value & 0x000F);
-
    if(value & 0x0200 && value & 0x0100){
       //enabled and exchange set
       uint8_t bitCount = (value & 0x000F) + 1;
@@ -233,6 +230,9 @@ static inline void setSpiCont2(uint16_t value){
       if(value & 0x0040)
          setIprIsrBit(INT_SPI2);
 
+      debugLog("SPI2 transfer, ENABLE:%s, XCH:%s, IRQ:%s, IRQEN:%s, BITCOUNT:%d\n", boolString(value & 0x0200), boolString(value & 0x0100), boolString(value & 0x0080), boolString(value & 0x0400), (value & 0x000F) + 1);
+      debugLog("SPI2 transfer, shifted in:0x%04X, shifted out:0x%04X\n", spi2Data >> (16 - bitCount), spi2ExternalData >> (16 - bitCount));
+
       //unset XCH, transfers are instant since timing is not emulated
       value &= 0xFEFF;
 
diff --git a/src/sed1376.c b/src/sed1376.c
index f1073cb..e292944 100644
--- a/src/sed1376.c
+++ b/src/sed1376.c
@@ -346,6 +346,6 @@ void sed1376Render(){
    else{
       //black screen
       memset(palmFramebuffer, 0x00, 160 * 160 * sizeof(uint16_t));
-      debugLog("Cant draw screen, LCD on:%s, PLL on:%s, power save on:%s, forced blank on:%s\n", boolString(palmMisc.lcdOn), boolString(pllIsOn()), boolString(sed1376PowerSaveEnabled()), boolString(sed1376Registers[DISP_MODE] & 0x80));
+      //debugLog("Cant draw screen, LCD on:%s, PLL on:%s, power save on:%s, forced blank on:%s\n", boolString(palmMisc.lcdOn), boolString(pllIsOn()), boolString(sed1376PowerSaveEnabled()), boolString(sed1376Registers[DISP_MODE] & 0x80));
    }
 }