starred/linux-legacy
1
0
Fork 0
mirror of https://github.com/genesi/linux-legacy.git synced 2026-09-24 07:35:43 +00:00
Code Issues 2 Packages Projects Releases Wiki Activity
Files
amd-gpu-linuxize
linux-legacy/arch/arm/mach-mx5
History
Matt Sealey e879208842 amd-gpu: mxc_gpu put back for Xorg autoloading support 
Sigh.. they actually search for the platform device name..
2012-12-03 15:49:14 -06:00
..
bus_freq.c
Some backports from FSL tree: lost the ENGR numbers but in summary:
2011-01-20 10:23:28 -06:00
clock_mx50.c
ENGR00125796 MX5x: Boot stop at "Starting kernel ..."
2010-10-21 13:12:36 -05:00
clock.c
ENGR00151762 vpu: Fix system hang due to long time video playback on mx51
2011-09-21 10:38:44 -05:00
cpu.c
ENGR00124849-3 mx5: add mx50 support
2010-08-10 11:51:29 -05:00
crm_regs.h
ENGR00124849-1 mx5: clean-up some includes of crm_regs.h
2010-08-10 11:51:28 -05:00
devices.c
amd-gpu: mxc_gpu put back for Xorg autoloading support
2012-12-03 15:49:14 -06:00
devices.h
Remove preallocation of framebuffer and GPU memory in favor of being nice and dynamic. Note that GPU memory reserved is entirely down to the MMU now, and framebuffer memory is "size of framebuffer" rounded up to 1MB block.
2011-06-28 15:08:08 -05:00
dma.c
ENGR00131932 upgrade SDMA scripts to 1.1, dual SSI FIFO support
2010-12-13 15:05:29 -06:00
dummy_gpio.c
ENGR00123017 MX53 Add support for MLB
2010-08-10 11:49:47 -05:00
early_setup.c
ENGR00122780 ipufb: rework display device setting method
2010-08-10 11:50:15 -05:00
iomux.c
ENGR00124849-3 mx5: add mx50 support
2010-08-10 11:51:29 -05:00
iomux.h
ENGR00121109 MX53: Add MSL layer
2010-08-10 11:48:25 -05:00
Kconfig
mark your calendars: this is the day one kernel supports both boards
2011-02-18 01:30:06 -06:00
lpmodes.c
ENGR00124849-1 mx5: clean-up some includes of crm_regs.h
2010-08-10 11:51:28 -05:00
Makefile
rename wwan -> periph
2011-02-19 15:48:32 -06:00
Makefile.boot
ENGR00124849-3 mx5: add mx50 support
2010-08-10 11:51:29 -05:00
mm.c
ENGR00124849-3 mx5: add mx50 support
2010-08-10 11:51:29 -05:00
mx50_arm2_gpio.c
ENGR00125056-1 MX50: add one wire pin configuration
2010-08-10 11:51:54 -05:00
mx50_arm2_pmic_mc13892.c
ENGR00124849-3 mx5: add mx50 support
2010-08-10 11:51:29 -05:00
mx50_arm2.c
ENGR00126565-1 MX50: add z160 version to platform_data of gpu_device
2010-11-13 10:09:57 -06:00
mx50_pins.h
ENGR00124849-3 mx5: add mx50 support
2010-08-10 11:51:29 -05:00
mx51_3stack_gpio.c
ENGR00121109 MX53: Add MSL layer
2010-08-10 11:48:25 -05:00
mx51_3stack_pmic_mc13892.c
ENGR00121798 MX53 RTC: Disable coin cell charging by pmic
2010-08-10 11:48:33 -05:00
mx51_3stack.c
ENGR00126861-1: mx51: pass csi clock in ipu platform data
2010-10-21 13:17:11 -05:00
mx51_babbage_gpio.c
ENGR00125056-1 MX50: add one wire pin configuration
2010-08-10 11:51:54 -05:00
mx51_babbage_pmic_mc13892.c
ENGR00120301 MX51: Fix slow TS issue
2010-08-10 11:50:49 -05:00
mx51_babbage.c
[arm] platform: remove unused edid code
2011-01-23 00:12:06 -08:00
mx51_efikamx_ata.c
Reorder PATA pins to match docs (S 4-90, Table 4-2) even though it looks less logical
2011-06-28 16:35:57 -05:00
mx51_efikamx_audio.c
Revert "audio: keep SGTL5000 clock on as the same clock is used for SPDIF 48Khz capability"
2011-12-02 20:29:01 -06:00
mx51_efikamx_battery.c
sbs: move away from resources and weird irq structures and use the input subsystem to provide us with notification of battery status events
2011-02-20 01:37:03 -06:00
mx51_efikamx_cpu.c
only enable peripheral power management on the Smartbook. On the Smarttop
2011-03-07 18:00:50 -06:00
mx51_efikamx_display.c
gpu: fix the weird gpummu/nogpummu memory reservation/allocation mess, and disable the gpummu again for maximum stability
2012-05-16 07:09:18 -05:00
mx51_efikamx_i2c.c
i2c: fix platform data for mxc_i2c driver, it won't load any drivers though as the index in i2c_register_board_info will be different for this driver
2011-02-23 23:51:33 -06:00
mx51_efikamx_input.c
Fix pad control for power key (based on ENGR00138697) not to have PKE
2011-04-20 09:49:14 -05:00
mx51_efikamx_leds.c
backlight: jiggle the order of powering on backlight and deconfiguring the backlight PWM on blank/restore. Also, don't mess with the IO state of the PWM pin, if the PWM is disabled, it's disabled, all we need to do is turn the power off.
2011-02-21 18:45:31 -06:00
mx51_efikamx_mmc.c
mmc: set drive voltage to 3.3V for SD cards, should solve all those CRC errors
2011-05-01 23:17:14 -05:00
mx51_efikamx_nor.c
shorten structure name, and mark some things as __init so they go away after init
2010-12-03 08:08:35 -06:00
mx51_efikamx_periph.c
simcard: delay for msecs_to_jiffies instead of jiffies_to_msecs for more responsive insertion event
2011-02-23 01:07:34 -06:00
mx51_efikamx_pmic.c
pmic,mmc: make VGEN2 and VSD regulators always pump 3.15V (3.3V is not possible apparently). VSD doesn't seem to be connected to anything on any EfikaMX board so it is debatable whether it needs to be turned on at all..
2011-11-03 12:50:45 -05:00
mx51_efikamx_spi.c
sb,mx: less chat, more configuration!
2011-02-17 18:13:37 -06:00
mx51_efikamx_uart.c
sb,mx: less chat, more configuration!
2011-02-17 18:13:37 -06:00
mx51_efikamx_usb.c
peripherals: rework power low/high stuff, less tweaking of the real values, more documentation
2011-02-22 23:44:48 -06:00
mx51_efikamx.c
bump reserved memory for all platforms to 16MB - reduction of 16MB from 'top, increase of 8MB from 'book. 16MB is enough to hold a double buffered 1080p
2011-08-25 10:37:01 -05:00
mx51_efikamx.h
Reinstate the 32MB reserved area for GPU since DMA allocations of large sizes just don't work.
2011-08-02 17:08:32 -05:00
mx51_pins.h
ENGR00121109 MX53: Add MSL layer
2010-08-10 11:48:25 -05:00
mx53_evk_gpio.c
ENGR00125056-1 MX50: add one wire pin configuration
2010-08-10 11:51:54 -05:00
mx53_evk_pmic_mc13892.c
ENGR00121963-3 MX53: Remove standby voltage setting
2010-08-10 11:48:45 -05:00
mx53_evk.c
ENGR00125552-1 MX5:Change LDB related video mode names
2010-08-10 11:52:07 -05:00
mx53_pins.h
ENGR00121109 MX53: Add MSL layer
2010-08-10 11:48:25 -05:00
pm.c
ENGR00124849-1 mx5: clean-up some includes of crm_regs.h
2010-08-10 11:51:28 -05:00
sdma_script_code_mx50.h
ENGR00131932 upgrade SDMA scripts to 1.1, dual SSI FIFO support
2010-12-13 15:05:29 -06:00
sdma_script_code_mx51.h
ENGR00131932 upgrade SDMA scripts to 1.1, dual SSI FIFO support
2010-12-13 15:05:29 -06:00
sdma_script_code_mx53.h
ENGR00131932 upgrade SDMA scripts to 1.1, dual SSI FIFO support
2010-12-13 15:05:29 -06:00
sdram_autogating.c
ENGR00124849-3 mx5: add mx50 support
2010-08-10 11:51:29 -05:00
serial.c
serial: conditionalize uart2 and uart3 registration for efikamx/efikasb to remove the warnings on build
2011-02-15 22:32:09 -06:00
serial.h
roll back serial snafu to BSP version
2010-09-08 11:50:27 -05:00
suspend.S
ENGR00121296: imx51: rename mx51 to mx5
2010-08-10 11:47:12 -05:00
system.c
system: don't pull the platform include just for one function definition (reboot)
2011-02-19 11:16:55 -06:00
usb_dr.c
ENGR00124963 USB: add vbus enable/disable
2010-08-10 11:51:32 -05:00
usb_h1.c
ENGR00124963 USB: add vbus enable/disable
2010-08-10 11:51:32 -05:00
usb_h2.c
ENGR00121651 MX53: Add support for USB
2010-08-10 11:48:26 -05:00
usb.h
EfikaMX Smartbook Kernel support, initial
2010-09-03 14:36:46 -05:00
wfi.S
ENGR00121296: imx51: rename mx51 to mx5
2010-08-10 11:47:12 -05:00