Make the BIOS linker optional in acpi_table_end() and calculate the ACPI
table checksum directly if no linker is provided.
This makes it possible to call for example
acpi_build_madt() from outside the ACPI table builder context.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Message-ID: <20260130054714.715928-3-osteffen@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use error_setg_errno() instead of passing the value of strerror() or
g_strerror() to error_setg().
The separator between the error message proper and the value of
strerror() changes from " : ", "", " - ", "- " to ": " in places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20251121121438.1249498-14-armbru@redhat.com>
Acked-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace
error_setg_errno(errp, errno, MSG, FNAME);
by
error_setg_file_open(errp, errno, FNAME);
where MSG is "Could not open '%s'" or similar.
Also replace equivalent uses of error_setg().
A few messages lose prefixes ("net dump: ", "SEV: ", __func__ ": ").
We could put them back with error_prepend(). Not worth the bother.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20251121121438.1249498-11-armbru@redhat.com>
[Conflict with commit 26b4a6ffe7 (monitor/hmp: Merge
hmp-cmds-target.c within hmp-cmds.c) resolved]
Move RAMBlock functions out of ram_addr.h and cpu-common.h;
move memory API headers out of include/exec and into include/system.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a QMP command to be used for generic ACPI APEI hardware error
injection (HEST) via GHESv2, and add support for it for ARM guests.
Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform
independent. This is mapped at arch virt bindings, depending on the
types supported by QEMU and by the BIOS. So, on ARM, this is supported
via ACPI_GHES_NOTIFY_GPIO notification type.
This patch was co-authored:
- original ghes logic to inject a simple ARM record by Shiju Jose;
- generic logic to handle block addresses by Jonathan Cameron;
- generic GHESv2 error inject by Mauro Carvalho Chehab;
Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-authored-by: Shiju Jose <shiju.jose@huawei.com>
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <81e2118b3c8b7e5da341817f277d61251655e0db.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code is actually dependent on having just one error
structure with a single source, as any change there would cause
migration issues.
As the number of sources should be arch-dependent, as it will depend on
what kind of notifications will exist, and how many errors can be
reported at the same time, change the logic to be more flexible,
allowing the number of sources to be defined when building the
HEST table by the caller.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <1698680848c11d6f26368426f1657e14faaf55c4.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two pointers that are needed during error injection:
1. The start address of the CPER block to be stored;
2. The address of the read ack.
It is preferable to calculate them from the HEST table. This allows
checking the source ID, the size of the table and the type of the
HEST error block structures.
Yet, keep the old code, as this is needed for migration purposes
from older QEMU versions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <d4344e8dbe66372e1e093d968eda2e8b0527ba48.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new ags flag to change the way HEST offsets are calculated.
Currently, offsets needed to store ACPI HEST offsets and read ack
are calculated based on a previous knowledge from the logic
which creates the HEST table.
Such logic is not generic, not allowing to easily add more HEST
entries nor replicates what OSPM does.
As the next patches will be adding a more generic logic, add a
new use_hest_addr, set to false, in preparation for such changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <f5de17bf04b27828e1a439ad396b4f7982eaf156.1758610789.git.mchehab+huawei@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reading QEMU_CLOCK_VIRTUAL is thread-safe, write access is NOP.
This makes possible to boot Windows with large vCPUs count when
hv-time is not used.
Reproducer:
-M q35,hpet=off -cpu host -enable-kvm -smp 240,sockets=4 -m 8G WS2025.img
fails to boot within 30min.
With this fix it boots within 2-1min.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20250814160600.2327672-3-imammedo@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we build the PPTT starting from the socket node and each
socket will be a separate tree. For a multi-socket system it'll
be hard for the OS to know the whole system is homogeneous or not
(actually we're in the current implementation) since no parent node
to telling the identical implementation informentation. Add a
root node for indicating this.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alireza Sanaee <alireza.sanaee@huawei.com>
Message-Id: <20250714173146.511-4-alireza.sanaee@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will notify the OS about PCI hotplug/hotunplug events through
GED interrupts. Let the GED device handle a new PCI hotplug event.
On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK
mutex held.
The GED device uses a dedicated MMIO region that will be mapped
by the machine code.
At this point the GED still does not support PCI device hotplug in
its TYPE_HOTPLUG_HANDLER implementation. This will come in a
subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let pass the root bus to ich9 and piix4 through a property link
instead of through an argument passed to acpi_pcihp_init().
Also make sure the root bus is set at the entry of acpi_pcihp_init().
The rationale of that change is to be consistent with the forecoming ARM
implementation where the machine passes the root bus (steming from GPEX)
to the GED device through a link property.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-28-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GPEX acpi_dsdt_add_pci_osc() does basically the same as
build_q35_osc_method().
Rename build_q35_osc_method() into build_pci_host_bridge_osc_method()
and move it into hw/acpi/pci.c. In a subsequent patch we will
use this later in place of acpi_dsdt_add_pci_osc().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-9-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_x86_acpi_pci_hotplug() implementation
for ARM so let's move the code to generic pcihp.
Associated static aml_pci_pdsm() helper is also moved along.
build_x86_acpi_pci_hotplug is renamed into build_acpi_pci_hotplug().
No code change intended.
Also fix the reference to acpi_pci_hotplug.rst documentation
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This leak was detected by the valgrind.
The crs_range_merge() function unconditionally allocated a GPtrArray
'even when range->len was zero, causing an early return without freeing
the allocated array. This resulted in a memory leak when an empty range
was processed.
Instead of moving the allocation after the check (as previously attempted),
use g_autoptr for automatic cleanup. This ensures the array is freed even
on early returns, and also removes the need for the explicit free at the
end of the function.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-Id: <20250613085110.111204-1-lizhijian@fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously these somewhat device like structures were tracked using a list
in the CXLState in each machine. This is proving restrictive in a few
cases where we need to iterate through these without being aware of the
machine type. Just make them sysbus devices.
Restrict them to not user created as they need to be visible to early
stages of machine init given effects on the memory map.
This change both simplifies state tracking and enables features needed
for performance optimization and hotness tracking by making it possible
to retrieve the fixed memory window on actions elsewhere in the topology.
In some cases the ordering of the Fixed Memory Windows matters.
For those utility functions provide a GSList sorted by the window index.
This ensures that we get consistency across:
- ordering in the command line
- ordering of the host PA ranges
- ordering of ACPI CEDT structures describing the CFMWS.
Other aspects don't have this constraint. For those direct iteration
of the underlying hash structures is fine.
In the setup path for the memory map in pc_memory_init() split the
operations into two calls. The first, cxl_fmws_set_mmemap(), loops over
fixed memory windows in order and assigns their addresses. The second,
cxl_fmws_update_mmio() actually sets up the mmio for each window.
This is obviously less efficient than a single loop but this split design
is needed to put the logic in two different places in the arm64 support
and it is not a hot enough path to justify an x86 only implementation.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Message-id: 20250703104110.992379-3-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several source comments still refer to docs with the old .txt
extension that were previously converted to reStructuredText.
Update these references to use the correct .rst extensions to
maintain accurate in-tree documentation pointers.
No functional changes.
Related commits:
50f8174c5c (Jul 2021): docs/specs/acpi_nvdimm: Convert to rST
f054eb1c92 (Jul 2021): docs/specs/acpi_pci_hotplug: Convert to rST
912fb3678b (Sep 2023): docs/specs/vmgenid: Convert to rST
bb1cff6ee0 (Sep 2023): docs/specs/ivshmem-spec: Convert to rST
55ff468f78 (Jan 2022): docs: Rename ppc-spapr-hotplug.txt to .rst
Signed-off-by: Sean Wei <me@sean.taipei>
Message-ID: <20250616.qemu.relocated.05@sean.taipei>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
