Track the input handled state, and dispose it on unrealize.
Also free some allocated fields during unrealize.
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
QemuInputEvent now stores Linux key codes for key events. Use those
codes directly instead of translating between internal key code
representations.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-14-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
QemuInputEvent now stores Linux key codes for key events. Use those
codes directly instead of translating between internal key code
representations.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-13-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
QemuInputEvent now stores Linux key codes for key events. Use those
codes directly instead of translating between internal key code
representations.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-12-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
QemuInputEvent now stores Linux key codes for key events. Use those
codes directly instead of translating between internal key code
representations.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-11-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
Linux input key codes are a better internal representation than
QKeyCode:
- With Linux input key codes as the internal representation, keys
previously lost solely because the middle layer between event sources
and sinks used QKeyCode will be preserved, since Linux key codes
cover all keys that those sources and sinks use. For example,
KEY_KPJPCOMMA cannot be represented with QKeyCode, but it is widely
supported by event sources and sinks since it is included in linux,
atset1, atset2, usb, x11, osx, qnum (derived from atset1),
xorgxquartz, and xorgevdev (derived from linux).
- They make it possible to pass through Linux host key codes to Linux
guests to preserve all key inputs.
- They simplify consumers by avoiding QKeyCode aliases, namely
asterisk/kp_multiply and sysrq/print.
This matches the approach used by virtio and Xen.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-4-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
Since commit af07e5ff02 ("ui: convert key events to QKeyCodes
immediately"), all internal key events are expected to be represented as
QKeyCode. Replace KeyValue in QemuInputKeyEvent with QKeyCode to enforce
that and simplify key code retrieval.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-3-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
QAPI represents union members with wrapper structs and pointer
indirections. They are useful at the QMP boundary, but unnecessary for
QEMU's internal input events and make handlers more verbose.
Define QemuInputEvent as a plain internal tagged union and convert input
handlers, queues, and replay code to access payloads directly.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-2-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
Add QemuInputEvent as the input subsystem's name for InputEvent and use
it in input handler, queue, and replay interfaces.
This prepares for decoupling QEMU's internal input event representation
from the QAPI InputEvent type.
Signed-off-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20260520-input-v3-1-7c9e4c7abe34@rsg.ci.i.u-tokyo.ac.jp>
The VirtIOInputHID::wheel_axis boolean was only set in the
hw_compat_2_10[] array, via the 'wheel-axis=false' property.
We removed all machines using that array, lets remove that
property and all the code around it. There is only one
virtio_input_config[] version for each device, rename it
removing the '_v2' suffix.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250501230129.2596-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Before this patch, users of the property array would free the
array themselves in their cleanup functions. This causes
inconsistencies where some users leak the array and some free them.
This patch makes it so that the property array's release function
frees the property array (instead of just its elements). It fixes any
leaks and requires less code.
DEFINE_PROP_ARRAY leakers that are fixed in this patch:
ebpf-rss_fds in hw/net/virtio-net.c
rnmi_irqvec, rnmi_excpvec in hw/riscv/riscv_hart.c
common.display_modes in hw/display/apple-gfx-mmio.m
common.display_modes in hw/display/apple-gfx-pci.m
Signed-off-by: Chandan Somani <csomani@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20260108230311.584141-2-csomani@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The return value of hid_keyboard_write is used to set the packet's actual_length
and pass to xhci directly to allow guest know how many byte actually processed.
Therefore, return 1 to indicate a successful transfer or it will be
considered as a wrong xfer.
Signed-off-by: ShengYi Hung <aokblast@FreeBSD.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of open-coded g_unix_set_fd_nonblocking() calls, use
QEMU wrapper qemu_set_blocking().
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[DB: fix missing closing ) in tap-bsd.c, remove now unused GError var]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Live migration should be terminated if the vhost-user backend crashes
before the migration completes.
Specifically, since the vhost device will be stopped when VM is stopped
before the end of the live migration, in current implementation if the
backend crashes, vhost-user device set_status() won't return failure,
live migration won't perceive the disconnection between QEMU and the
backend.
When the VM is migrated to the destination, the inflight IO will be
resubmitted, and if the IO was completed out of order before, it will
cause IO error.
To fix this issue:
1. Add the return value to set_status() for VirtioDeviceClass.
a. For the vhost-user device, return failure when the backend crashes.
b. For other virtio devices, always return 0.
2. Return failure if vhost_dev_stop() failed for vhost-user device.
If QEMU loses connection with the vhost-user backend, virtio set_status()
can return failure to the upper layer, migration_completion() can handle
the error, terminate the live migration, and restore the VM, so that
inflight IO can be completed normally.
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Message-Id: <20250416024729.3289157-4-haoqian.he@smartx.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Accel & Exec patch queue
- Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander)
- Add '-d invalid_mem' logging option (Zoltan)
- Create QOM containers explicitly (Peter)
- Rename sysemu/ -> system/ (Philippe)
- Re-orderning of include/exec/ headers (Philippe)
Move a lot of declarations from these legacy mixed bag headers:
. "exec/cpu-all.h"
. "exec/cpu-common.h"
. "exec/cpu-defs.h"
. "exec/exec-all.h"
. "exec/translate-all"
to these more specific ones:
. "exec/page-protection.h"
. "exec/translation-block.h"
. "user/cpu_loop.h"
. "user/guest-host.h"
. "user/page-protection.h"
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t
# wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt
# KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K
# A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8
# 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe///
# 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r
# xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl
# VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay
# ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP
# 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd
# +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6
# x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo=
# =cjz8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Dec 2024 11:45:20 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits)
util/qemu-timer: fix indentation
meson: Do not define CONFIG_DEVICES on user emulation
system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header
system/numa: Remove unnecessary 'exec/cpu-common.h' header
hw/xen: Remove unnecessary 'exec/cpu-common.h' header
target/mips: Drop left-over comment about Jazz machine
target/mips: Remove tswap() calls in semihosting uhi_fstat_cb()
target/xtensa: Remove tswap() calls in semihosting simcall() helper
accel/tcg: Un-inline translator_is_same_page()
accel/tcg: Include missing 'exec/translation-block.h' header
accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h'
accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h'
qemu/coroutine: Include missing 'qemu/atomic.h' header
exec/translation-block: Include missing 'qemu/atomic.h' header
accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h'
exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined
target/sparc: Move sparc_restore_state_to_opc() to cpu.c
target/sparc: Uninline cpu_get_tb_cpu_state()
target/loongarch: Declare loongarch_cpu_dump_state() locally
user: Move various declarations out of 'exec/exec-all.h'
...
Conflicts:
hw/char/riscv_htif.c
hw/intc/riscv_aplic.c
target/s390x/cpu.c
Apply sysemu header path changes to not in the pull request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Remove the lm832x keyboard-and-pwm i2c device model. This
was only used by the n800 and n810 machines.
(Although this is an i2c device and so in theory available to create
on the command line, in practice it has an outbound IRQ line that the
machine model needs to wire up, and the only way to inject keys events
into it is to call the lm832x_key_event() function, so it isn't
in practice possible to use it separately from the n800/n810.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-32-peter.maydell@linaro.org
Remove the tsc210x touchscreen controller device, which was
only used by the n800 and n810 and cheetah.
The uWireSlave struct is still used in omap1.c (at least for
compilation purposes -- nothing any longer calls omap_uwire_attach()
and so the struct's members will not be used at runtime), so
we move it into omap.h so we can delete tsc2xxx.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-30-peter.maydell@linaro.org
Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
Some of the source files for older devices use hardcoded tabs
instead of our current coding standard's required spaces.
Fix these in the following files:
- hw/arm/boot.c
- hw/char/omap_uart.c
- hw/gpio/zaurus.c
- hw/input/tsc2005.c
This commit is mostly whitespace-only changes; it also
adds curly-braces to some 'if' statements.
This addresses part of https://gitlab.com/qemu-project/qemu/-/issues/373
but some other files remain to be handled.
Signed-off-by: Tanmay Patil <tanmaynpatil105@gmail.com>
Message-id: 20240508081502.88375-1-tanmaynpatil105@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check the function index is in range and use an unsigned
variable to avoid the following warning with GCC 13.2.0:
[666/5358] Compiling C object libcommon.fa.p/hw_input_tsc2005.c.o
hw/input/tsc2005.c: In function 'tsc2005_timer_tick':
hw/input/tsc2005.c:416:26: warning: array subscript has type 'char' [-Wchar-subscripts]
416 | s->dav |= mode_regs[s->function];
| ~^~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240508143513.44996-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed missing ')']
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
Commit 0be6bfac62 ("qdev: Implement variable length array properties")
added the DEFINE_PROP_ARRAY() macro with the following comment:
* It is the responsibility of the device deinit code to free the
* @_arrayfield memory.
Commit a75f336b97 added:
DEFINE_PROP_ARRAY("keycodes", StellarisGamepad, num_buttons,
keycodes, qdev_prop_uint32, uint32_t),
but forgot to free the 'keycodes' array. Do it in the instance_finalize
handler.
Fixes: a75f336b97 ("hw/input/stellaris_input: Convert to qdev")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231121174051.63038-7-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target-arm queue:
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
* tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device
hw/misc: Introduce AMD/Xilix Versal TRNG device
target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
hw/char/stm32f2xx_usart: Add more definitions for CR1 register
hw/char/stm32f2xx_usart: Update IRQ when DR is written
hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
target/arm: Fix SVE STR increment
target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
linux-user: Report AArch64 hwcap2 fields above bit 31
target/arm: Enable FEAT_MOPS insns in user-mode emulation
hw/i2c/pm_smbus: Convert DPRINTF to trace events
hw/misc/imx6_ccm: Convert DPRINTF to trace events
hw/misc/imx7_snvs: Trace MMIO access
hw/watchdog/wdt_imx2: Trace timer activity
hw/watchdog/wdt_imx2: Trace MMIO access
hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
MAINTAINERS: Make sure that gicv3_internal.h is covered, too
docs/specs/vmgenid: Convert to rST
docs/specs/vmcoreinfo: Convert to rST
...
Conflicts:
hw/input/stellaris_input.c
The qdev conversion in this pull request ("stellaris-gamepad: Convert
to qdev") eliminates the vmstate_register() call that was converted to
vmstate_register_any() in the conflicting migration pull request.
vmstate_register_any() is no longer necessary now that this device has
been converted to qdev, so take this pull request's version of
stellaris_gamepad.c over the previous pull request's
stellaris_input.c (the file was renamed).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that we have converted to qdev, we can use the newer
qemu_input_handler_register() API rather than the legacy
qemu_add_kbd_event_handler().
Since we only have one user, take the opportunity to convert
from scancodes to QCodes, rather than using
qemu_input_key_value_to_scancode() (which adds an 0xe0
prefix and encodes up/down indication in the scancode,
which our old handler function then had to reverse). That
lets us drop the old state field which was tracking whether
we were halfway through a two-byte scancode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-7-peter.maydell@linaro.org
Convert the hw/input/stellaris_input device to qdev.
The interface uses an array property for the board to specify the
keycodes to use, so the s->keycodes memory is now allocated by the
array-property machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030114802.3671871-6-peter.maydell@linaro.org
