qemu-qemu-1/docs/about/deprecated.rst

.. _Deprecated features:

Deprecated features
===================

In general features are intended to be supported indefinitely once
introduced into QEMU. In the event that a feature needs to be removed,
it will be listed in this section. The feature will remain functional for the
release in which it was deprecated and one further release. After these two
releases, the feature is liable to be removed. Deprecated features may also
generate warnings on the console when QEMU starts up, or if activated via a
monitor command, however, this is not a mandatory requirement.

As a special exception to this general timeframe, rather than have an
indefinite lifetime, versioned machine types are only intended to be
supported for a period of 6 years, equivalent to 18 QEMU releases. All
versioned machine types will be automatically marked deprecated after an
initial 3 years (9 QEMU releases) has passed, and will then be deleted after
a further 3 year period has passed. It is recommended that a deprecated
machine type is only used for incoming migrations and restore of saved state,
for pre-existing VM deployments. They should be scheduled for updating to a
newer machine type during an appropriate service window. Newly deployed VMs
should exclusively use a non-deprecated machine type, with use of the most
recent version highly recommended. Non-versioned machine types follow the
general feature deprecation policy.

What follows is a list of all features currently marked as
deprecated.

System emulator command line arguments
--------------------------------------

Short-form boolean options (since 6.0)
''''''''''''''''''''''''''''''''''''''

Boolean options such as ``share=on``/``share=off`` could be written
in short form as ``share`` and ``noshare``.  This is now deprecated
and will cause a warning.

``delay`` option for socket character devices (since 6.0)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''

The replacement for the ``nodelay`` short-form boolean option is ``nodelay=on``
rather than ``delay=off``.

Plugin argument passing through ``arg=<string>`` (since 6.1)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Passing TCG plugins arguments through ``arg=`` is redundant is makes the
command-line less readable, especially when the argument itself consist of a
name and a value, e.g. ``-plugin plugin_name,arg="arg_name=arg_value"``.
Therefore, the usage of ``arg`` is redundant. Single-word arguments are treated
as short-form boolean values, and passed to plugins as ``arg_name=on``.
However, short-form booleans are deprecated and full explicit ``arg_name=on``
form is preferred.

QEMU Machine Protocol (QMP) commands
------------------------------------

``blockdev-open-tray``, ``blockdev-close-tray`` argument ``device`` (since 2.8)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Use argument ``id`` instead.

``eject`` argument ``device`` (since 2.8)
'''''''''''''''''''''''''''''''''''''''''

Use argument ``id`` instead.

``blockdev-change-medium`` argument ``device`` (since 2.8)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Use argument ``id`` instead.

``block_set_io_throttle`` argument ``device`` (since 2.8)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Use argument ``id`` instead.

``blockdev-add`` empty string argument ``backing`` (since 2.10)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Use argument value ``null`` instead.

``block-commit`` arguments ``base`` and ``top`` (since 3.1)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Use arguments ``base-node`` and ``top-node`` instead.

``nbd-server-add`` and ``nbd-server-remove`` (since 5.2)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Use the more generic commands ``block-export-add`` and ``block-export-del``
instead.  As part of this deprecation, where ``nbd-server-add`` used a
single ``bitmap``, the new ``block-export-add`` uses a list of ``bitmaps``.

``query-qmp-schema`` return value member ``values`` (since 6.2)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Member ``values`` in return value elements with meta-type ``enum`` is
deprecated.  Use ``members`` instead.

``drive-backup`` (since 6.2)
''''''''''''''''''''''''''''

Use ``blockdev-backup`` in combination with ``blockdev-add`` instead.
This change primarily separates the creation/opening process of the backup
target with explicit, separate steps. ``blockdev-backup`` uses mostly the
same arguments as ``drive-backup``, except the ``format`` and ``mode``
options are removed in favor of using explicit ``blockdev-create`` and
``blockdev-add`` calls. See :doc:`/interop/live-block-operations` for
details.

``block-job-pause`` (since 10.1)
''''''''''''''''''''''''''''''''

Use ``job-pause`` instead. The only difference is that ``job-pause``
always reports GenericError on failure when ``block-job-pause`` reports
DeviceNotActive when block-job is not found.

``block-job-resume`` (since 10.1)
'''''''''''''''''''''''''''''''''

Use ``job-resume`` instead. The only difference is that ``job-resume``
always reports GenericError on failure when ``block-job-resume`` reports
DeviceNotActive when block-job is not found.

``block-job-complete`` (since 10.1)
'''''''''''''''''''''''''''''''''''

Use ``job-complete`` instead. The only difference is that ``job-complete``
always reports GenericError on failure when ``block-job-complete`` reports
DeviceNotActive when block-job is not found.

``block-job-dismiss`` (since 10.1)
''''''''''''''''''''''''''''''''''

Use ``job-dismiss`` instead.

``block-job-finalize`` (since 10.1)
'''''''''''''''''''''''''''''''''''

Use ``job-finalize`` instead.

Human Machine Protocol (HMP) commands
-------------------------------------

``wavcapture`` (since 10.2)
''''''''''''''''''''''''''''

The ``wavcapture`` command is deprecated and will be removed in a future release.

Use ``-audiodev wav`` or your host audio system to capture audio.

``stopcapture`` (since 10.2)
''''''''''''''''''''''''''''

The ``stopcapture`` command is deprecated and will be removed in a future release.

``info`` argument ``capture`` (since 10.2)
''''''''''''''''''''''''''''''''''''''''''

The ``info capture`` command is deprecated and will be removed in a future release.

Host Architectures
------------------

MIPS (since 10.2)
'''''''''''''''''

MIPS is not supported by Debian 13 ("Trixie") and newer, making it hard to
maintain our cross-compilation CI tests of the architecture. As we no longer
have CI coverage support may bitrot away before the deprecation process
completes.

TCG Plugin support not enabled by default with TCI (since 9.2)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

While the TCG interpreter can interpret the TCG ops used by plugins it
is going to be so much slower it wouldn't make sense for any serious
instrumentation. Due to implementation differences there will also be
anomalies in things like memory instrumentation.

System emulator CPUs
--------------------

``power5+`` and ``power7+`` CPU names (since 9.0)
'''''''''''''''''''''''''''''''''''''''''''''''''

The character "+" in device (and thus also CPU) names is not allowed
in the QEMU object model anymore. ``power5+``, ``power5+_v2.1``,
``power7+`` and ``power7+_v2.1`` are currently still supported via
an alias, but for consistency these will get removed in a future
release, too. Use ``power5p_v2.1`` and ``power7p_v2.1`` instead.

``Sun-UltraSparc-IIIi+`` and ``Sun-UltraSparc-IV+`` CPU names (since 9.1)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

The character "+" in device (and thus also CPU) names is not allowed
in the QEMU object model anymore. ``Sun-UltraSparc-IIIi+`` and
``Sun-UltraSparc-IV+`` are currently still supported via a workaround,
but for consistency these will get removed in a future release, too.
Use ``Sun-UltraSparc-IIIi-plus`` and ``Sun-UltraSparc-IV-plus`` instead.

PPC 405 CPUs (since 10.0)
'''''''''''''''''''''''''

The PPC 405 CPU has no known users and the ``ref405ep`` machine was
removed in QEMU 10.0. Since the IBM POWER [8-11] processors uses an
embedded 405 for power management (OCC) and other internal tasks, it
is theoretically possible to use QEMU to model them. Let's keep the
CPU implementation for a while before removing all support.

Power8E and Power8NVL CPUs and corresponding Pnv chips (since 10.1)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

The Power8E and Power8NVL variants of Power8 are not really useful anymore
in qemu, and are old and unmaintained now.

The CPUs as well as corresponding Power8NVL and Power8E PnvChips will also
be considered deprecated.

System emulator machines
------------------------

Versioned machine types (aarch64, arm, i386, m68k, ppc64, s390x, x86_64)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

In accordance with our versioned machine type deprecation policy, all machine
types with version |VER_MACHINE_DEPRECATION_VERSION|, or older, have been
deprecated.

Arm ``virt`` machine ``dtb-kaslr-seed`` property (since 7.1)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

The ``dtb-kaslr-seed`` property on the ``virt`` board has been
deprecated; use the new name ``dtb-randomness`` instead. The new name
better reflects the way this property affects all random data within
the device tree blob, not just the ``kaslr-seed`` node.

Arm ``sonorapass-bmc`` machine (since 10.2)
'''''''''''''''''''''''''''''''''''''''''''

The ``sonorapass-bmc`` machine represents a lab server that never
entered production. Since it does not rely on any specific device
models, it can be replaced by the ``ast2500-evb`` machine using the
``fmc-model`` option to specify the flash type. The I2C devices
connected to the board can be defined via the QEMU command line.

Arm ``qcom-dc-scm-v1-bmc`` and ``qcom-firework-bmc`` machine (since 10.2)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

The ``qcom-dc-scm-v1-bmc`` and ``qcom-firework-bmc`` represent lab
servers that never entered production. Since they do not rely on any
specific device models, they can be replaced by the ``ast2600-evb``
machine using the ``fmc-model`` option to specify the flash type. The
I2C devices connected to the board can be defined via the QEMU command
line.

Arm ``fp5280g2-bmc`` machine (since 10.2)
'''''''''''''''''''''''''''''''''''''''''

The ``fp5280g2-bmc`` machine does not rely on any specific device
models, it can be replaced by the ``ast2500-evb`` machine using the
``fmc-model`` option to specify the flash type. The I2C devices
connected to the board can be defined via the QEMU command line.

Arm ``fby35`` machine (since 10.2)
''''''''''''''''''''''''''''''''''

The ``fby35`` machine was originally added as an example of a
multi-SoC system, with the expectation the models would evolve over
time in an heterogeneous system. This hasn't happened and no public
firmware is available to boot it. It can be replaced by the
``ast2700fc``, another multi-SoC machine based on the newer AST2700
SoCs which are excepted to receive better support in the future.


RISC-V default machine option (since 10.0)
''''''''''''''''''''''''''''''''''''''''''

RISC-V defines ``spike`` as the default machine if no machine option is
given in the command line.  This happens because ``spike`` is the first
RISC-V machine implemented in QEMU and setting it as default was
convenient at that time.  Now we have 7 riscv64 and 6 riscv32 machines
and having ``spike`` as a default is no longer justified.  This default
will also promote situations where users think they're running ``virt``
(the most used RISC-V machine type in 10.0) when in fact they're
running ``spike``.

Removing the default machine option forces users to always set the machine
they want to use and avoids confusion.  Existing users of the ``spike``
machine must ensure that they're setting the ``spike`` machine in the
command line (``-M spike``).

Arm ``highbank`` and ``midway`` machines (since 10.1)
'''''''''''''''''''''''''''''''''''''''''''''''''''''

There are no known users left for these machines (if you still use it,
please write a mail to the qemu-devel mailing list). If you just want to
boot a Cortex-A15 or Cortex-A9 Linux, use the ``virt`` machine instead.


System emulator binaries
------------------------

``qemu-system-microblazeel`` (since 10.1)
'''''''''''''''''''''''''''''''''''''''''

The ``qemu-system-microblaze`` binary can emulate little-endian machines
now, too, so the separate binary ``qemu-system-microblazeel`` (with the
``el`` suffix) for little-endian targets is not required anymore. The
``petalogix-s3adsp1800`` machine can now be switched to little endian by
setting its ``endianness`` property to ``little``.


Backend options
---------------

Using non-persistent backing file with pmem=on (since 6.1)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

This option is used when ``memory-backend-file`` is consumed by emulated NVDIMM
device. However enabling ``memory-backend-file.pmem`` option, when backing file
is (a) not DAX capable or (b) not on a filesystem that support direct mapping
of persistent memory, is not safe and may lead to data loss or corruption in case
of host crash.
Options are:

    - modify VM configuration to set ``pmem=off`` to continue using fake NVDIMM
      (without persistence guaranties) with backing file on non DAX storage
    - move backing file to NVDIMM storage and keep ``pmem=on``
      (to have NVDIMM with persistence guaranties).

Using an external DH (Diffie-Hellman) parameters file (since 10.2)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

Loading of external Diffie-Hellman parameters from a 'dh-params.pem'
file is deprecated and will be removed with no replacement in a
future release. Where no 'dh-params.pem' file is provided, the DH
parameters will be automatically negotiated in accordance with
RFC7919.

Device options
--------------

Emulated device options
'''''''''''''''''''''''

``-device nvme-ns,eui64-default=on|off`` (since 7.1)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

In QEMU versions 6.1, 6.2 and 7.0, the ``nvme-ns`` generates an EUI-64
identifier that is not globally unique. If an EUI-64 identifier is required, the
user must set it explicitly using the ``nvme-ns`` device parameter ``eui64``.

``-device nvme,use-intel-id=on|off`` (since 7.1)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The ``nvme`` device originally used a PCI Vendor/Device Identifier combination
from Intel that was not properly allocated. Since version 5.2, the controller
has used a properly allocated identifier. Deprecate the ``use-intel-id``
machine compatibility parameter.

``-device cxl-type3,memdev=xxxx`` (since 8.0)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The ``cxl-type3`` device initially only used a single memory backend.  With
the addition of volatile memory support, it is now necessary to distinguish
between persistent and volatile memory backends.  As such, memdev is deprecated
in favor of persistent-memdev.


RISC-V CPU properties which start with capital 'Z' (since 8.2)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

All RISC-V CPU properties which start with capital 'Z' are being deprecated
starting in 8.2. The reason is that they were wrongly added with capital 'Z'
in the past. CPU properties were later added with lower-case names, which
is the format we want to use from now on.

Users which try to use these deprecated properties will receive a warning
recommending to switch to their stable counterparts:

- "Zifencei" should be replaced with "zifencei"
- "Zicsr" should be replaced with "zicsr"
- "Zihintntl" should be replaced with "zihintntl"
- "Zihintpause" should be replaced with "zihintpause"
- "Zawrs" should be replaced with "zawrs"
- "Zfa" should be replaced with "zfa"
- "Zfh" should be replaced with "zfh"
- "Zfhmin" should be replaced with "zfhmin"
- "Zve32f" should be replaced with "zve32f"
- "Zve64f" should be replaced with "zve64f"
- "Zve64d" should be replaced with "zve64d"

Block device options
''''''''''''''''''''

``"backing": ""`` (since 2.12)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

In order to prevent QEMU from automatically opening an image's backing
chain, use ``"backing": null`` instead.

``rbd`` keyvalue pair encoded filenames: ``""`` (since 3.1)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Options for ``rbd`` should be specified according to its runtime options,
like other block drivers.  Legacy parsing of keyvalue pair encoded
filenames is useful to open images with the old format for backing files;
These image files should be updated to use the current format.

Example of legacy encoding::

  json:{"file.driver":"rbd", "file.filename":"rbd:rbd/name"}

The above, converted to the current supported format::

  json:{"file.driver":"rbd", "file.pool":"rbd", "file.image":"name"}

``iscsi,password=xxx`` (since 8.0)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Specifying the iSCSI password in plain text on the command line using the
``password`` option is insecure. The ``password-secret`` option should be
used instead, to refer to a ``--object secret...`` instance that provides
a password via a file, or encrypted.

``gluster`` backend (since 9.2)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

According to https://marc.info/?l=fedora-devel-list&m=171934833215726
the GlusterFS development effectively ended. Unless the development
gains momentum again, the QEMU project will remove the gluster backend
in a future release.


Character device options
''''''''''''''''''''''''

Backend ``memory`` (since 9.0)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

``memory`` is a deprecated synonym for ``ringbuf``.


CPU device properties
'''''''''''''''''''''

``pmu-num=n`` on RISC-V CPUs (since 8.2)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

In order to support more flexible counter configurations this has been replaced
by a ``pmu-mask`` property. If set of counters is continuous then the mask can
be calculated with ``((2 ^ n) - 1) << 3``. The least significant three bits
must be left clear.


``pcommit`` on x86 (since 9.1)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The PCOMMIT instruction was never included in any physical processor.
It was implemented as a no-op instruction in TCG up to QEMU 9.0, but
only with ``-cpu max`` (which does not guarantee migration compatibility
across versions).

Backwards compatibility
-----------------------

Runnability guarantee of CPU models (since 4.1)
'''''''''''''''''''''''''''''''''''''''''''''''

Previous versions of QEMU never changed existing CPU models in
ways that introduced additional host software or hardware
requirements to the VM.  This allowed management software to
safely change the machine type of an existing VM without
introducing new requirements ("runnability guarantee").  This
prevented CPU models from being updated to include CPU
vulnerability mitigations, leaving guests vulnerable in the
default configuration.

The CPU model runnability guarantee won't apply anymore to
existing CPU models.  Management software that needs runnability
guarantees must resolve the CPU model aliases using the
``alias-of`` field returned by the ``query-cpu-definitions`` QMP
command.

While those guarantees are kept, the return value of
``query-cpu-definitions`` will have existing CPU model aliases
point to a version that doesn't break runnability guarantees
(specifically, version 1 of those CPU models).  In future QEMU
versions, aliases will point to newer CPU model versions
depending on the machine type, so management software must
resolve CPU model aliases before starting a virtual machine.

RISC-V "virt" board "riscv,delegate" DT property (since 9.1)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

The "riscv,delegate" DT property was added in QEMU 7.0 as part of
the AIA APLIC support.  The property changed name during the review
process in Linux and the correct name ended up being
"riscv,delegation".  Changing the DT property name will break all
available firmwares that are using the current (wrong) name.  The
property is kept as is in 9.1, together with "riscv,delegation", to
give more time for firmware developers to change their code.

x86 "isapc" board use of modern x86 CPUs (since 10.2)
'''''''''''''''''''''''''''''''''''''''''''''''''''''

The "isapc" board represents a historical x86 ISA PC and is intended for
older 32-bit x86 CPU models, defaulting to a 486 CPU model.  Previously it
was possible (but non-sensical) to specify a more modern x86 CPU, including
``-cpu host`` or ``-cpu max`` even if the features were incompatible with many
of the intended guest OSs.

If the user requests a modern x86 CPU model (i.e. not one of ``486``,
``athlon``, ``kvm32``, ``pentium``, ``pentium2``, ``pentium3``or ``qemu32``)
a warning will be displayed until a future QEMU version when such CPUs will
be rejected.

Migration
---------

``fd:`` URI when used for file migration (since 9.1)
''''''''''''''''''''''''''''''''''''''''''''''''''''

The ``fd:`` URI can currently provide a file descriptor that
references either a socket or a plain file. These are two different
types of migration. In order to reduce ambiguity, the ``fd:`` URI
usage of providing a file descriptor to a plain file has been
deprecated in favor of explicitly using the ``file:`` URI with the
file descriptor being passed as an ``fdset``. Refer to the ``add-fd``
command documentation for details on the ``fdset`` usage.