Add explicit decodetree entries and translator bindings for the Octeon
CRC and GFM COP2 operation selectors. Unlike simple register moves,
these selectors update CRC or Galois-field state and therefore remain
per-operation helper calls.
Keep CRC/GFM decode next to the helpers that implement these side
effects while avoiding a monolithic selector-dispatch helper.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-15-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add the Octeon CHORD hardware register access path and the LLM 36-bit
and 64-bit read and write windows. Model both CHORD access forms,
including the RDHWR $30 path and the legacy DMFC2 alias.
Implement sparse backing storage for the two LLM sets so user-mode code
can save, restore, and probe the architectural state without allocating a
full hardware-sized backing array.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-13-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add helper support for the Octeon HSH hash selectors. This includes the
base HSH data/IV windows, MD5, SHA1, SHA256, and SHA512 transform paths,
and the shared HSH/SHA512 register-window readback and write operations.
The SHA512 path shares the wide HSH register bank with SHA3, SNOW3G, and
ZUC. Keep the aliased readback and write paths centralized so selector
decode can route register accesses through these helpers when side
effects are required.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-12-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add helper support for the Octeon Camellia ROUND, FL, and FLINV
selectors. The engine reuses the AES RESINP bank, and guest-managed key
schedules drive the Camellia F-function and FL layers through these COP2
operations.
Implement the Camellia F-function and FL layers directly from RFC 3713.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-11-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add helper support for the Octeon 3DES and KASUMI operation selectors.
The 3DES helpers implement ECB and CBC encrypt/decrypt over the shared
3DES key, IV, and result bank. KASUMI reuses the same register bank and
adds its own encrypt selectors.
Only the operation selectors require helper code. Simple key, IV, and
result register transfers are handled by direct selector decode.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-10-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add helper support for the Octeon AES operation selectors. Direct
register-transfer selectors do not need helpers; the ECB/CBC encrypt and
decrypt operations consume the AES input, key, IV, and key-length state.
AESRESINP is modeled as one architectural register bank; operation
helpers consume the current AESRESINP block and write the result back to
the same bank.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-8-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add the Octeon ZUC START and MORE helper operations and model the shared
state window used by the hardware interface. This covers the keystream
and MAC engine state, including the save-and-restore view that overlaps
the HSH/SHA3 bank.
Keep the LFSR words in the architectural HSH DAT input registers and the
runtime MAC/FSM/result state in the documented HASHIV window. The third
MAC lookahead word is generated on demand instead of being kept in a
non-architectural shadow slot.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-6-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add the Octeon SHA3 helper operations for the architectural 25-lane
Keccak state view and implement the Keccak-f[1600] permutation used by
the STARTOP selector.
The simple SHA3 DAT register moves and XORDAT selectors are decoded as
direct TCG transfers in the selector decode patch. This helper patch only
keeps the side-effecting SHA3 operation support.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-5-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add helper support for the Octeon GFM carryless multiply selectors. This
models the normal and reflected multiplication paths, including the
XOR-and-multiply forms that update the result/input state used by Octeon
crypto code.
Reflected selectors operate on the architectural GFM register bank using
bit-reflected register transfers rather than a separate shadow state.
Keep the 64-bit UIA2 reduction path used by SNOW3G F9 and share that
shortcut between the normal and reflected XORMUL1 paths.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-4-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add helper support for the Octeon COP2 CRC register interface. This
covers normal and reflected CRC state handling, byte/halfword/word/
doubleword/variable-width update selectors, and the reflected IV readback
operation.
Register moves that can be represented as direct TCG loads/stores do not
need helpers. Add only the side-effecting CRC helper implementation here.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-3-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Add the Octeon COP2 crypto helper source file and build it with the MIPS
TCG target. This provides the common compilation unit for the COP2 engine
helpers.
The instruction dispatch itself remains fully decoded by decodetree, and
operation selectors call per-operation helpers rather than a common
selector-dispatch helper.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20260608-mips-octeon-missing-insns-v2-v16-2-daef7a0d8b04@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
