In commit 01765386a8 we fixed a bug where we weren't correctly
bracketing changes to some registers with pmu_op_start() and
pmu_op_finish() calls for changes which affect whether the PMU
counters might be enabled. However, we missed the case of writes to
the AArch64 MDCR_EL3 register, because (unlike its AArch32
counterpart) they are currently done directly to the CPU state struct
without going through the sdcr_write() function.
Give MDCR_EL3 a writefn which handles the PMU start/finish calls.
The SDCR writefn then simplfies to "call the MDCR_EL3 writefn after
masking off the bits which don't exist in the AArch32 register".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-3-peter.maydell@linaro.org
In commit 01765386a8 we made some system register write functions
call pmu_op_start()/pmu_op_finish(). This means that they now touch
timers, so for icount to work these registers must have the ARM_CP_IO
flag set.
This fixes a bug where when icount is enabled a guest that touches
MDCR_EL3, MDCR_EL2, PMCNTENSET_EL0 or PMCNTENCLR_EL0 would cause
QEMU to print an error message and exit, for example:
[ 2.495971] TCP: Hash tables configured (established 1024 bind 1024)
[ 2.496213] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.496386] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.496917] NET: Registered protocol family 1
qemu-system-aarch64: Bad icount read
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-2-peter.maydell@linaro.org
While the source directory is always included in the include path,
the corresponding directory in the build tree is not. Therefore,
custom_targets (e.g. ui/dbus-display1.h) must be referred to using
the full path.
This avoids a build failure when ui/dbus-chardev.c is not built as
a module:
In file included from ../ui/dbus-chardev.c:32:
../ui/dbus.h:34:10: fatal error: dbus-display1.h: No such file or directory
34 | #include "dbus-display1.h"
| ^~~~~~~~~~~~~~~~~
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the close-on-exec flags is not set on the file descriptors returned
by socketpair() at default, the fds will survive across exec' function.
In the case that exec' function get invoked, such as the live-update feature
which is been developing, it will cause fd leaks.
To address this problem, we should call qemu_socketpair() to create an pair of
connected sockets with the close-on-exec flag set.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7002b12a5fb0a30cd878e14e07da61c36da72913.1661240709.git.tugy@chinatelecom.cn>
If finalize chardev-msmouse or chardev-wctable is called immediately after
init it cases QEMU to crash with segfault. This happens because of
QTAILQ_REMOVE in qemu_input_handler_unregister tries to dereference
NULL pointer.
For instance, this error can be reproduced via `qom-list-properties`
command.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220825165247.33704-1-davydov-max@yandex-team.ru>
Make source buffers const for char be write functions.
This allows using buffers returned by fifo as buf parameter and source buffer
should not be changed by write functions anyway.
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-3-arwed.meyer@gmx.de>
This was deprecated in 6.2 and is ready to go. It removes quite a bit
of code that handled the registration of watchdog models.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The structure VFIOMigration of a VFIODevice is allocated and initialized
in vfio_migration_init(). "device_state" and "vm_running" are initialized
to 0, indicating that VFIO device is_STOP and VM is not-running. The
initialization value is incorrect. According to the agreement, default
state of VFIO device is _RUNNING. And if a VFIO device is hot-plugged
while the VM is running, "vm_running" should be 1. This patch fixes it.
Fixes: 02a7e71b1e ("vfio: Add VM state change handler to know state of VM")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20220711014651.1327-1-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This qtest executable created a serial chardev file to be passed to
the QEMU executable. The serial file was created by g_file_open_tmp(),
which internally opens the file with FILE_SHARE_WRITE security attribute
on Windows. Based on [1], there is only one case that allows the first
call to CreateFile() with GENERIC_READ & FILE_SHARE_WRITE, and second
call to CreateFile() with GENERIC_WRITE & FILE_SHARE_READ. All other
combinations require FILE_SHARE_WRITE in the second call. But there is
no way for the second call (in this case the QEMU executable) to know
what combination was passed to the first call, unless FILE_SHARE_WRITE
is passed to the second call.
Two processes shouldn't share the same file for writing with a chardev.
Let's close the serial file before starting QEMU.
[1] https://docs.microsoft.com/en-us/windows/win32/fileio/creating-and-opening-files
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220927110632.1973965-40-bmeng.cn@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some migration test cases use TLS to communicate, but they fail on
Windows with the following error messages:
qemu-system-x86_64: TLS handshake failed: Insufficient credentials for that request.
qemu-system-x86_64: TLS handshake failed: Error in the pull function.
query-migrate shows failed migration: TLS handshake failed: Error in the pull function.
Disable them temporarily.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220925113032.1949844-51-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
close() is a *nix function. It works on any file descriptor, and
sockets in *nix are an example of a file descriptor.
closesocket() is a Windows-specific function, which works only
specifically with sockets. Sockets on Windows do not use *nix-style
file descriptors, and socket() returns a handle to a kernel object
instead, so it must be closed with closesocket().
In QEMU there is already a logic to handle such platform difference
in os-posix.h and os-win32.h, that:
* closesocket maps to close on POSIX
* closesocket maps to a wrapper that calls the real closesocket()
on Windows
Replace the call to close a socket with closesocket() instead.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-46-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By default Windows opens file in text mode, while a POSIX compliant
implementation treats text files and binary files the same.
The fopen() 'mode' string can include the letter 'b' to indicate
binary mode shall be used. POSIX spec says the character 'b' shall
have no effect, but is allowed for ISO C standard conformance.
Let's add the letter 'b' which works on both POSIX and Windows.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-41-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Single quotes in the arguments (oem_id='CRASH ') are not removed in
the Windows environment before it is passed to the QEMU executable.
The space in the argument causes the "-acpitable" option parser to
think that all of its parameters are done, hence it complains:
'-acpitable' requires one of 'data' or 'file'
Change to use double quotes which works fine on all platforms.
Also /dev/null does not work on win32, and nul should be used.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220925113032.1949844-39-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libqmp.c::qmp_fd_vsend_fds() is not available on Windows, hence any
APIs in libqtest that call libqmp.c::qmp_fd_vsend_fds() should be
excluded for win32 too. This includes the following:
* qtest_qmp_vsend_fds()
* qtest_vqmp_fds()
* qtest_qmp_fds()
* qtest_qmp_add_client()
Note qtest_qmp_vsend() was wrongly written to call qmp_fd_vsend_fds()
previously, but it should call the non fds version API qmp_fd_vsend().
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220925113032.1949844-35-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit dd21074972 ("tests/libqtest: Use libqtest-single.h in tests that require global_qtest")
moved global_qtest to libqtest-single.h, by declaring global_qtest
attribute to be common and weak.
This trick unfortunately does not work on Windows, and building
qtest test cases results in multiple definition errors of the weak
symbol global_qtest, as Windows PE does not have the concept of
the so-called weak symbol like ELF in the *nix world.
However Windows does provide a trick to declare a variable to be
a common symbol, via __declspec(selectany) [1]. It does not provide
the "strong override weak" effect but we don't need it in our use
case anyway. So let's use it for win32.
[1] https://docs.microsoft.com/en-us/cpp/cpp/selectany
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220925113032.1949844-33-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
