Currently configure can identify all the targets that have
cross-compilers available from the supplied target-list. By default
this is the default_target_list which is all possible targets we can
build.
At the same time the target list passed to meson is filtered down
depending on various factors including not building 64 bit targets on
32 bit hosts. As a result make check-tcg will erroneously attempt to
run tests for which we haven't built a QEMU.
Solve this by filtering the final list of TCG_TEST_TARGETS based on
what actually was configured by meson. Rename the variable that
configure spits out to TCG_TESTS_WITH_COMPILERS for clarity and to
avoid larger churn in the Makefile.
Message-ID: <20251204194902.1340008-4-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The download cache of the functional tests is currently only growing.
But sometimes tests get removed or changed to use different assets,
thus we should clean up the stale old assets after a while when they
are not in use anymore. So add a script that looks at the time stamps
of the assets and removes them if they haven't been touched for more
than half of a year. Since there might also be some assets around that
have been added to the cache before we added the time stamp files,
assume a default time stamp that is close to the creation date of this
patch, so that we don't delete these files too early (so we still have
all assets around in case we have to bisect an issue in the recent past
of QEMU).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20251014083424.103202-3-thuth@redhat.com>
If QEMU gets configured for a single target that does not have
any thorough functional tests, "make check-functional" currently
fails with the error message "No rule to make target 'check-func'".
This happens because "check-func" only gets defined for thorough
tests (quick ones get added to "check-func-quick" instead).
The same problem can happen with the quick tests for targets that
do not have any functional test at all. To fix it, simply make sure
that the targets are always available in the Makefile.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Closes: https://gitlab.com/qemu-project/qemu/-/issues/3119
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250918125154.126072-1-thuth@redhat.com>
When reviewing tracetool patches it is often very unclear what the
expected output will be for the generated backends. Compounding
this is that a default build will only enable the 'log' trace
backend, so developers won't see generated code for other backends
without making a special effort. Some backends are also platform
specific, so can't be enabled in QEMU builds, even though tracetool
could generate the code.
To address this, introduce a test suite for tracetool which is
conceptually similar to the qapi-schema test. It is a simple
python program that runs tracetool and compares the actual output
to historical reference output kept in git. The test directly
emits TAP format logs for ease of integration with meson.
This can be run with
make check-tracetool
to make it easier for developers changing generated output, the
sample expected content can be auto-recreated
QEMU_TEST_REGENERATE=1 make check-tracetool
and the changes reviewed and added to the commit. This will also
assist reviewers interpreting the change.
Developers are reminded of this in the test output on failure:
$ make check-tracetool
1/6 qemu:tracetool / dtrace OK 0.14s
2/6 qemu:tracetool / ftrace FAIL 0.06s exit status 1
――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
1..2
ok 1 - ftrace.c
#
not ok 1 - ftrace.h (set QEMU_TEST_REGENERATE=1 to recreate reference output if tracetool generator was intentionally changed)
――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
3/6 qemu:tracetool / log OK 0.06s
4/6 qemu:tracetool / simple OK 0.06s
5/6 qemu:tracetool / syslog OK 0.06s
6/6 qemu:tracetool / ust OK 0.11s
Summary of Failures:
2/6 qemu:tracetool / ftrace FAIL 0.06s exit status 1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20250916081638.764020-6-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all Avocado tests have been converted to or been replaced by
other functional tests, we can delete the remainders of the Avocado
tests from the QEMU source tree.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250414113031.151105-16-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Many tests need to access assets stored on remote sites. We don't want
to download these during test execution when run by meson, since this
risks hitting test timeouts when data transfers are slow.
Add support for pre-emptive caching of assets by setting the env var
QEMU_TEST_PRECACHE to point to a timestamp file. When this is set,
instead of running the test, the assets will be downloaded and saved
to the cache, then the timestamp file created.
A meson custom target is created as a dependency of each test suite
to trigger the pre-emptive caching logic before the test runs.
When run in caching mode, it will locate assets by looking for class
level variables with a name prefix "ASSET_", and type "Asset".
At the ninja level
ninja test --suite functional
will speculatively download any assets that are not already cached,
so it is advisable to set a timeout multiplier.
QEMU_TEST_NO_DOWNLOAD=1 ninja test --suite functional
will fail the test if a required asset is not already cached
ninja precache-functional
will download and cache all assets required by the functional
tests
At the make level, precaching is always done by
make check-functional
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Remove the duplicated "path = os.path.basename(...)" line]
Message-ID: <20240830133841.142644-16-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Provide a meson.build file for the upcoming python-based functional
tests, and add some wrapper glue targets to the tests/Makefile.include
file. We are going to use two "speed" modes for the functional tests:
The "quick" tests can be run at any time (i.e. also during "make check"),
while the "thorough" tests should only be run when running a
"make check-functional" test run (since these tests might download
additional assets from the internet).
The changes to the meson.build files are partly based on an earlier
patch by Ani Sinha.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This bumps Avocado to latest the LTS release.
An LTS release is one that can receive bugfixes and guarantees
stability for a much longer period and has incremental minor releases
made.
Even though the 103.0 LTS release is pretty a rewrite of Avocado when
compared to 88.1, the behavior of all existing tests under
tests/avocado has been extensively tested no regression in behavior
was found.
To keep behavior of jobs as close as possible with previous version,
this version bump keeps the execution serial (maximum of one task at a
time being run).
Reference: https://avocado-framework.readthedocs.io/en/103.0/releases/lts/103_0.html
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-ID: <20240806173119.582857-2-crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'app' level logging is useful, but sometimes we want
more, for example QEMU leverages the 'console' logging.
Allow overwriting AVOCADO_SHOW from environment, i.e.:
$ make check-avocado AVOCADO_SHOW='app,console'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240719180211.48073-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The non-standard .fa library suffix breaks the link source
de-duplication done by Meson so drop it.
The lack of link source de-duplication causes AddressSanitizer to
complain ODR violations, and makes GNU ld abort when combined with
clang's LTO.
Fortunately, the non-standard suffix is not necessary anymore for
two reasons.
First, the non-standard suffix was necessary for fork-fuzzing.
Meson wraps all standard-suffixed libraries with --start-group and
--end-group. This made a fork-fuzz.ld linker script wrapped as well and
broke builds. Commit d2e6f9272d ("fuzz: remove fork-fuzzing
scaffolding") dropped fork-fuzzing so we can now restore the standard
suffix.
Second, the libraries are not even built anymore, because it is
possible to just use the object files directly via extract_all_objects().
The occurences of the suffix were detected and removed by performing
a tree-wide search with 'fa' and .fa (note the quotes and dot).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the content of $mkvenv_flags (which is either "--online"
or empty) down to tests/Makefile.include.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the option still needs to be parsed in the configure script
(it's needed by tests/tcg, and also to decide about recursing
into contrib/plugins), passing it to Meson can be done with -D
instead of using config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit e8e4298fea.
ensuregroup allows to specify both the acceptable versions of avocado,
and a locked version to be used when avocado is not installed as a system
pacakge. This lets us install avocado in pyvenv/ using "mkvenv.py" and
reuse the distro package on Fedora and CentOS Stream (the only distros
where it's available).
ensuregroup's usage of "(>=..., <=...)" constraints when evaluating
the distro package, and "==" constraints when installing it from PyPI,
makes it possible to avoid conflicts between the known-good version and
a package plugins included in the distro.
This is because package plugins have "==" constraints on the version
that is included in the distro, and, using "pip install avocado==88.1"
on a venv that includes system packages will result in an error:
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
But at the same time, if the venv does not include a system distribution
of avocado then we can install a known-good version and stick to LTS
releases.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1663
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commits eea2d14117 ("Makefile: remove $(TESTS_PYTHON)",
2023-05-26) and 9c6692db55 ("tests: Use configure-provided pyvenv for
tests", 2023-05-18).
Right now, there is a conflict between wanting a ">=" constraint when
using a distro-provided package and wanting a "==" constraint when
installing Avocado from PyPI; this would provide the best of both worlds
in terms of resiliency for both distros that have required packages and
distros that don't.
The conflict is visible also for meson, where we would like to install
the latest 0.63.x version but also accept a distro 1.1.x version.
But it is worse for avocado, for two reasons:
1) we cannot use an "==" constraint to install avocado if the venv
includes a system avocado. The distro will package plugins that have
"==" constraints on the version that is included in the distro, and, using
"pip install avocado==88.1" on a venv that includes system packages will
result in this error:
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
make[1]: Leaving directory '/home/berrange/src/virt/qemu/build'
2) we cannot use ">=" either if the venv does _not_ include a system
avocado, because that would result in the installation of v101.0 which
is the one we've just reverted.
So the idea is to encode the dependencies as an (acceptable, locked)
tuple, like this hypothetical TOML that would be committed inside
python/ and used by mkvenv.py:
[meson]
meson = { minimum = "0.63.0", install = "0.63.3", canary = "meson" }
[docs]
# 6.0 drops support for Python 3.7
sphinx = { minimum = "1.6", install = "<6.0", canary = "sphinx-build" }
sphinx_rtd_theme = { minimum = "0.5" }
[avocado]
avocado-framework = { minimum = "88.1", install = "88.1", canary = "avocado" }
Once this is implemented, it would also be possible to install avocado in
pyvenv/ using "mkvenv.py ensure", thus using the distro package on Fedora
and CentOS Stream (the only distros where it's available). But until
this is implemented, keep avocado in a separate venv. There is still the
benefit of using a single python for meson custom_targets and for sphinx.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit ec5ffa0056.
Bumping avocado to version 101 has two issues. First, there are problems
where Avocado is not logging of command lines or terminal output, and not
collecting Python logs outside the avocado namespace.
Second, the recent changes to Python handling mean that there is a single
virtual environment for all the build, instead of a separate one for testing.
Requiring a too-new version of avocado causes conflicts with any avocado
plugins installed on the host:
$ make check-venv
make[1]: Entering directory '/home/berrange/src/virt/qemu/build'
GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 dtc
VENVPIP install -e /home/berrange/src/virt/qemu/python/
VENVPIP install -r /home/berrange/src/virt/qemu/tests/requirements.txt
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 101.0 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 101.0 which is incompatible.
make[1]: Leaving directory '/home/berrange/src/virt/qemu/build'
To avoid this issue, tests/requirements.txt should use a ">=" constraint
and the version of Avocado should be limited to what distros provide
in the system packages. Only Fedora has Avocado, and more specifically
version 92.0 (though 98.0 is also available as a module). As a first
step, this patch reverts the introduction of a too-new Avocado.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is now the same as $(PYTHON), since the latter always points at pyvenv/bin/python3.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch changes how the avocado tests are provided, ever so
slightly. Instead of creating a new testing venv, use the
configure-provided 'pyvenv' instead, and install optional packages into
that.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-20-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avocado version 101.0 has a fix to re-compute the checksum
of an asset file if the algorithm used in the *-CHECKSUM
file isn't the same as the one being passed to it by the
avocado user (i.e. the avocado_qemu python module).
In the earlier avocado versions this fix wasn't there due
to which if the checksum wouldn't match the earlier
checksum (calculated by a different algorithm), the avocado
code would start downloading a fresh image from the internet
URL thus making the test-cases take longer to execute.
Bump up the avocado-framework version to 101.0.
Signed-off-by: Kautuk Consul <kconsul@linux.vnet.ibm.com>
Tested-by: Hariharan T S <hariharan.ts@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230327115030.3418323-2-kconsul@linux.vnet.ibm.com>
Message-Id: <20230424092249.58552-2-alex.bennee@linaro.org>
Instead of linking tests/tcg/Makefile.target into the build tree, name
the symbolic link "Makefile" and create it in every target subdirectory.
This makes it possible to just invoke "make" in tests/tcg subdirectories.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-21-alex.bennee@linaro.org>
Remove the DOCKER_SCRIPT and TARGET variable from the Makefile invocation
for tests/tcg. For DOCKER_SCRIPT, resolve the path to docker.py in configure;
for TARGET, move it to config-$(TARGET).mak and use a symbolic link to break
the cycle.
The symbolic link is still needed because tests/tcg includes dummy config files
for targets that are not buildable. Once that is cleaned up, the symbolic link
will go away too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-20-alex.bennee@linaro.org>
This patch adds the "qemu" namespace package to the $build/tests/venv
directory. It does so in "editable" mode, which means that changes to
the source python directory will actively be reflected by the venv.
This patch also then removes any sys.path hacking from the avocado test
scripts directly. By doing this, the environment of where to find these
packages is managed entirely by the virtual environment and not by the
scripts themselves.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220526000921.1581503-7-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Factor out the "test venv pip" macro; rewrite the "check-venv" rule to
be a little more compact. Replace the "PIP" pseudo-command output with
"VENVPIP" to make it 1% more clear that we are talking about using pip
to install something into a venv.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220526000921.1581503-6-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a convenience feature: $(PYTHON) points to the Python executable
we were instructed to use by the configure script. We use that Python to
create a virtual environment with the "check-venv" target in
tests/Makefile.include.
$(TESTS_PYTHON) points to the Python executable belonging to the virtual
environment tied to the build. This Python executable is a symlink to
the binary used to create the venv, which will be the version provided
at configure time.
Using $(TESTS_PYTHON) therefore uses the $(PYTHON) executable, but with
paths modified to use packages installed to the venv.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220526000921.1581503-3-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 3d2f73ef75 ("build: use "meson test" as the test harness"),
check-report.tap is no more, and we have check-report.junit.xml.
Update the output of 'make check-help', which was still listing
'check-report.tap', accordingly.
Fixes: 3d2f73ef75
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165366545439.6869.11633009118019728798.stgit@work>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tests/tcg/configure.sh has a complicated story.
In the beginning its code ran as part of the creation of config-target.mak
files, and that is where it placed the information on the target compiler.
However, probing for the buildability of TCG tests required multiple
inclusions of config-target.mak in the _main_ Makefile (not in
Makefile.target, which took care of building the QEMU executables in
the pre-Meson era), which polluted the namespace.
Thus, it was moved to a separate directory. It created small config-*.mak
files in $(BUILD_DIR)/tests/tcg. Those were also included multiple
times, but at least they were small and manageable; this was also an
important step in disentangling the TCG tests from Makefile.target.
Since then, Meson has allowed the configure script to go on a diet.
A few compilation tests survive (mostly for sanitizers) but these days
it mostly takes care of command line parsing, looking for tools, and
setting up the environment for Meson to do its stuff.
It's time to extend configure with the capability to build for more
than just one target: not just tests, but also firmware. As a first
step, integrate all the logic to find cross compilers in the configure
script, and move tests/tcg/configure.sh back there (though as a
separate loop, not integrated in the one that generates target
configurations for Meson).
tests/tcg is actually very close to being buildable as a standalone
project, so I actually expect the compiler tests to move back to
tests/tcg, as a "configure" script of sorts which would run at Make
time after the docker images are built. The GCC tree has a similar idea
of doing only bare-bones tree-wide configuration and leaving the rest
for Make time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-19-alex.bennee@linaro.org>
Build the "docker.py cc" invocation directly in tests/tcg/configure.sh, and
remove the Makefile.qemu wrapper around Makefile.target. The config-*.mak
files now include the actual variables used when building the tests, rather
than the CROSS_* variables that Makefile.qemu used to "translate".
This is a first step towards generalizing the cross-compilation infrastructure
so that it can be used for firmware as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-18-alex.bennee@linaro.org>
If there is a failing iotest, the output is currently not logged to
the console anymore. To get this working again, we need to run the
meson test runner with "--print-errorlogs" (and without "--verbose"
due to a current meson bug that will be fixed here:
https://github.com/mesonbuild/meson/commit/c3f145ca2b9f5.patch ).
We could update the "meson test" call in tests/Makefile.include,
but actually it's nicer and easier if we simply do not treat the
iotests as separate test target anymore and integrate them along
with the other test suites. This has the disadvantage of not getting
the detailed progress indication there anymore, but since that was
only working right in single-threaded "make -j1" mode anyway, it's
not a huge loss right now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220310075048.2303495-1-thuth@redhat.com>
Tested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.
Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces a new `make` target, `check-avocado`, and adds a
deprecation message about the `check-acceptance` target. This is
a preparation for renaming the `tests/acceptance` folder to
`tests/avocado`.
The plan is to remove the call to the `check-avocado` target one
or two months after the release and leave the warning to force
people to move to the new `check-avocado` target.
Later, the `check-acceptance` target can be removed. The intent
is to avoid a direct impact during the current soft freeze.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211105155354.154864-2-willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
"make check", if not preceded by "make", will not build the tools
needed by qemu-iotests. This happens because qemu-iotests, aka
"make check-block", is not yet part of meson.build.
While at it, remove the reference to the now-dead QEMU_IOTESTS_HELPERS-y
variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "check-acceptance" make rule won't necessarily run *all* available
tests, because it employs a filter based on the currently configured
targets. This change in the description of the rule makes that
behavior extra clear.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-3-crosa@redhat.com>
Add the possibility of running all the tests from a single file, or
multiple files, running a single test within a file or multiple tests
within multiple files using `make check-acceptance` and the
AVOCADO_TESTS environment variable.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-4-willianr@redhat.com>
Although it is possible to run a specific test using the avocado
command-line, a user may want to use a specific tag while running the
``make check-acceptance`` during the development or debugging.
This allows using the AVOCADO_TAGS environment variable where the user
takes total control of which tests should run based on the tags defined.
This also makes the check-acceptance command flexible to restrict tests
based on tags while running on CI.
e.g.:
AVOCADO_TAGS="foo bar baz" make check-acceptance
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-2-willianr@redhat.com>
