Files
qemu/util/async.c
Jaehoon Kim 9563d0b5e2 aio-poll: refine iothread polling using weighted handler intervals
Improve adaptive polling by updating each AioHandler's poll.ns
every loop iteration using weighted averages. This reduces CPU
consumption while minimizing performance impact.

Background:
Starting from QEMU 10.0, poll.ns was introduced per event handler
to mitigate excessive fluctuations in IOThread polling times
observed in earlier versions (QEMU 9.x). However, the current
design has limitations:

1. poll.ns is updated only when an event occurs, making it
   difficult to treat block_ns as a reliable event interval.
2. The IOThread's next polling time is determined by the maximum
   poll.ns among all AioHandlers, meaning idle AioHandlers with
   high poll.ns can have an outsized impact on polling duration.
3. For io_uring, idle AioHandlers are cleared after
   POLL_IDLE_INTERVAL_NS (7s), but for ppoll/epoll there is no
   such mechanism, leading to increased CPU consumption from idle
   nodes.

Implementation:
This patch treats block_ns as an event interval and updates each
AioHandler's poll.ns in every loop iteration:

- Active handlers (with events): poll.ns is updated using a
  weighted average of the current block_ns and previous poll.ns,
  smoothing out adjustments and preventing excessive fluctuations.
- Inactive handlers (no events): poll.ns accumulates block_ns
  without weighting, allowing rapid isolation of idle nodes. When
  poll.ns exceeds poll_max_ns, it resets to 0, preventing
  sporadically active handlers from unnecessarily prolonging
  iothread polling.
- The iothread polling duration is set based on the largest poll.ns
  among active handlers. The shrink divider defaults to 2, matching
  the grow rate, to reduce frequent poll_ns resets for slow devices.

The implementation renames poll_idle_timeout to last_dispatch_timestamp
for use as an active handler identifier.

Testing:
POLL_WEIGHT_SHIFT=3 (12.5% weight) was selected based on testing
comparing baseline vs weight=2/3 across various workloads:
Performance results (RHEL 10.1 + QEMU 10.0.0, FCP/FICON, 1-8 iothreads,
numjobs 1/4/8 averaged):
                    | poll-weight=2      | poll-weight=3
--------------------|--------------------|-----------------
Throughput avg      | -2.4% (all tests)  | -2.2% (all tests)
CPU consumption avg | -10.9% (all tests) | -9.4% (all tests)

Both configurations achieve ~10% CPU reduction with minimal throughput
impact (~2%). Weight=3 is chosen as default for slightly better
throughput while maintaining substantial CPU savings.

Additional validation testing on s390x SSD with fio (bs=8k, iodepth=8,
numjobs=1) shows how poll_weight affects polling time (poll.ns)
behavior:

RandRead workload:
+-------------+-----------+-----------+-------------+-------------+
| poll_weight | #samples  | Mean (ns) | 50th % (ns) | 90th % (ns) |
+-------------+-----------+-----------+-------------+-------------+
| 1           | 4.79M     |  8,034    |  5,116      | 20,509      |
| 2           | 5.01M     | 12,584    | 11,078      | 24,693      |
| 3           | 5.01M     | 15,647    | 14,863      | 28,695      |
| 4           | 5.12M     | 16,430    | 15,556      | 30,848      |
| 5           | 5.14M     | 16,461    | 15,306      | 32,123      |
+-------------+-----------+-----------+-------------+-------------+
RandWrite workload:
+-------------+-----------+-----------+-------------+-------------+
| poll_weight | #samples  | Mean (ns) | 50th % (ns) | 90th % (ns) |
+-------------+-----------+-----------+-------------+-------------+
| 1           | 6.37M     |  2,049    |  1,262      |  4,301      |
| 2           | 7.46M     |  4,118    |  3,226      |  7,476      |
| 3           | 7.97M     |  7,034    |  5,984      | 11,645      |
| 4           | 7.96M     | 12,789    | 11,362      | 20,040      |
| 5           | 7.82M     | 22,992    | 20,644      | 32,768      |
+-------------+-----------+-----------+-------------+-------------+

Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com>
Message-ID: <20260423195918.661299-3-jhkim@linux.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2026-04-29 11:31:44 -04:00

760 lines
20 KiB
C

/*
* Data plane event loop
*
* Copyright (c) 2003-2008 Fabrice Bellard
* Copyright (c) 2009-2017 QEMU contributors
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/aio.h"
#include "block/thread-pool.h"
#include "block/graph-lock.h"
#include "qemu/main-loop.h"
#include "qemu/mem-reentrancy.h"
#include "qemu/atomic.h"
#include "qemu/lockcnt.h"
#include "qemu/rcu_queue.h"
#include "block/raw-aio.h"
#include "qemu/coroutine_int.h"
#include "qemu/coroutine-tls.h"
#include "exec/icount.h"
#include "trace.h"
/***********************************************************/
/* bottom halves (can be seen as timers which expire ASAP) */
/* QEMUBH::flags values */
enum {
/* Already enqueued and waiting for aio_bh_poll() */
BH_PENDING = (1 << 0),
/* Invoke the callback */
BH_SCHEDULED = (1 << 1),
/* Delete without invoking callback */
BH_DELETED = (1 << 2),
/* Delete after invoking callback */
BH_ONESHOT = (1 << 3),
/* Schedule periodically when the event loop is idle */
BH_IDLE = (1 << 4),
};
struct QEMUBH {
AioContext *ctx;
const char *name;
QEMUBHFunc *cb;
void *opaque;
QSLIST_ENTRY(QEMUBH) next;
unsigned flags;
MemReentrancyGuard *reentrancy_guard;
};
/* Called concurrently from any thread */
static void aio_bh_enqueue(QEMUBH *bh, unsigned new_flags)
{
AioContext *ctx = bh->ctx;
unsigned old_flags;
/*
* Synchronizes with atomic_fetch_and() in aio_bh_dequeue(), ensuring that
* insertion starts after BH_PENDING is set.
*/
old_flags = qatomic_fetch_or(&bh->flags, BH_PENDING | new_flags);
if (!(old_flags & BH_PENDING)) {
/*
* At this point the bottom half becomes visible to aio_bh_poll().
* This insertion thus synchronizes with QSLIST_MOVE_ATOMIC in
* aio_bh_poll(), ensuring that:
* 1. any writes needed by the callback are visible from the callback
* after aio_bh_dequeue() returns bh.
* 2. ctx is loaded before the callback has a chance to execute and bh
* could be freed.
*/
QSLIST_INSERT_HEAD_ATOMIC(&ctx->bh_list, bh, next);
}
aio_notify(ctx);
if (unlikely(icount_enabled())) {
/*
* Workaround for record/replay.
* vCPU execution should be suspended when new BH is set.
* This is needed to avoid guest timeouts caused
* by the long cycles of the execution.
*/
icount_notify_exit();
}
}
/* Only called from aio_bh_poll() and aio_ctx_finalize() */
static QEMUBH *aio_bh_dequeue(BHList *head, unsigned *flags)
{
QEMUBH *bh = QSLIST_FIRST_RCU(head);
if (!bh) {
return NULL;
}
QSLIST_REMOVE_HEAD(head, next);
/*
* Synchronizes with qatomic_fetch_or() in aio_bh_enqueue(), ensuring that
* the removal finishes before BH_PENDING is reset.
*/
*flags = qatomic_fetch_and(&bh->flags,
~(BH_PENDING | BH_SCHEDULED | BH_IDLE));
return bh;
}
void aio_bh_schedule_oneshot_full(AioContext *ctx, QEMUBHFunc *cb,
void *opaque, const char *name)
{
QEMUBH *bh;
bh = g_new(QEMUBH, 1);
*bh = (QEMUBH){
.ctx = ctx,
.cb = cb,
.opaque = opaque,
.name = name,
};
aio_bh_enqueue(bh, BH_SCHEDULED | BH_ONESHOT);
}
QEMUBH *aio_bh_new_full(AioContext *ctx, QEMUBHFunc *cb, void *opaque,
const char *name, MemReentrancyGuard *reentrancy_guard)
{
QEMUBH *bh;
bh = g_new(QEMUBH, 1);
*bh = (QEMUBH){
.ctx = ctx,
.cb = cb,
.opaque = opaque,
.name = name,
.reentrancy_guard = reentrancy_guard,
};
return bh;
}
void aio_bh_call(QEMUBH *bh)
{
bool last_engaged_in_io = false;
/* Make a copy of the guard-pointer as cb may free the bh */
MemReentrancyGuard *reentrancy_guard = bh->reentrancy_guard;
if (reentrancy_guard) {
last_engaged_in_io = reentrancy_guard->engaged_in_io;
if (reentrancy_guard->engaged_in_io) {
trace_reentrant_aio(bh->ctx, bh->name);
}
reentrancy_guard->engaged_in_io = true;
}
bh->cb(bh->opaque);
if (reentrancy_guard) {
reentrancy_guard->engaged_in_io = last_engaged_in_io;
}
}
/* Multiple occurrences of aio_bh_poll cannot be called concurrently. */
int aio_bh_poll(AioContext *ctx)
{
BHListSlice slice;
BHListSlice *s;
int ret = 0;
/* Synchronizes with QSLIST_INSERT_HEAD_ATOMIC in aio_bh_enqueue(). */
QSLIST_MOVE_ATOMIC(&slice.bh_list, &ctx->bh_list);
/*
* GCC13 [-Werror=dangling-pointer=] complains that the local variable
* 'slice' is being stored in the global 'ctx->bh_slice_list' but the
* list is emptied before this function returns.
*/
#if !defined(__clang__)
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wpragmas"
#pragma GCC diagnostic ignored "-Wdangling-pointer="
#endif
QSIMPLEQ_INSERT_TAIL(&ctx->bh_slice_list, &slice, next);
#if !defined(__clang__)
#pragma GCC diagnostic pop
#endif
while ((s = QSIMPLEQ_FIRST(&ctx->bh_slice_list))) {
QEMUBH *bh;
unsigned flags;
bh = aio_bh_dequeue(&s->bh_list, &flags);
if (!bh) {
QSIMPLEQ_REMOVE_HEAD(&ctx->bh_slice_list, next);
continue;
}
if ((flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
/* Idle BHs don't count as progress */
if (!(flags & BH_IDLE)) {
ret = 1;
}
aio_bh_call(bh);
}
if (flags & (BH_DELETED | BH_ONESHOT)) {
g_free(bh);
}
}
return ret;
}
void qemu_bh_schedule_idle(QEMUBH *bh)
{
aio_bh_enqueue(bh, BH_SCHEDULED | BH_IDLE);
}
void qemu_bh_schedule(QEMUBH *bh)
{
aio_bh_enqueue(bh, BH_SCHEDULED);
}
/* This func is async.
*/
void qemu_bh_cancel(QEMUBH *bh)
{
qatomic_and(&bh->flags, ~BH_SCHEDULED);
}
/* This func is async.The bottom half will do the delete action at the finial
* end.
*/
void qemu_bh_delete(QEMUBH *bh)
{
aio_bh_enqueue(bh, BH_DELETED);
}
static int64_t aio_compute_bh_timeout(BHList *head, int timeout)
{
QEMUBH *bh;
QSLIST_FOREACH_RCU(bh, head, next) {
int flags = qatomic_load_acquire(&bh->flags);
if ((flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
if (flags & BH_IDLE) {
/* idle bottom halves will be polled at least
* every 10ms */
timeout = 10000000;
} else {
/* non-idle bottom halves will be executed
* immediately */
return 0;
}
}
}
return timeout;
}
int64_t
aio_compute_timeout(AioContext *ctx)
{
BHListSlice *s;
int64_t deadline;
int timeout = -1;
timeout = aio_compute_bh_timeout(&ctx->bh_list, timeout);
if (timeout == 0) {
return 0;
}
QSIMPLEQ_FOREACH(s, &ctx->bh_slice_list, next) {
timeout = aio_compute_bh_timeout(&s->bh_list, timeout);
if (timeout == 0) {
return 0;
}
}
deadline = timerlistgroup_deadline_ns(&ctx->tlg);
if (deadline == 0) {
return 0;
} else {
return qemu_soonest_timeout(timeout, deadline);
}
}
static gboolean
aio_ctx_prepare(GSource *source, gint *timeout)
{
AioContext *ctx = (AioContext *) source;
qatomic_set(&ctx->notify_me, qatomic_read(&ctx->notify_me) | 1);
/*
* Write ctx->notify_me before computing the timeout
* (reading bottom half flags, etc.). Pairs with
* smp_mb in aio_notify().
*/
smp_mb();
/* We assume there is no timeout already supplied */
*timeout = qemu_timeout_ns_to_ms(aio_compute_timeout(ctx));
if (aio_prepare(ctx)) {
*timeout = 0;
}
return *timeout == 0;
}
static gboolean
aio_ctx_check(GSource *source)
{
AioContext *ctx = (AioContext *) source;
QEMUBH *bh;
BHListSlice *s;
/* Finish computing the timeout before clearing the flag. */
qatomic_store_release(&ctx->notify_me, qatomic_read(&ctx->notify_me) & ~1);
aio_notify_accept(ctx);
QSLIST_FOREACH_RCU(bh, &ctx->bh_list, next) {
int flags = qatomic_load_acquire(&bh->flags);
if ((flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
return true;
}
}
QSIMPLEQ_FOREACH(s, &ctx->bh_slice_list, next) {
QSLIST_FOREACH_RCU(bh, &s->bh_list, next) {
int flags = qatomic_load_acquire(&bh->flags);
if ((flags & (BH_SCHEDULED | BH_DELETED)) == BH_SCHEDULED) {
return true;
}
}
}
return aio_pending(ctx) || (timerlistgroup_deadline_ns(&ctx->tlg) == 0);
}
static gboolean
aio_ctx_dispatch(GSource *source,
GSourceFunc callback,
gpointer user_data)
{
AioContext *ctx = (AioContext *) source;
assert(callback == NULL);
aio_dispatch(ctx);
return true;
}
static void
aio_ctx_finalize(GSource *source)
{
AioContext *ctx = (AioContext *) source;
QEMUBH *bh;
unsigned flags;
if (!ctx->initialized) {
return;
}
thread_pool_free_aio(ctx->thread_pool);
#ifdef CONFIG_LINUX_AIO
if (ctx->linux_aio) {
laio_detach_aio_context(ctx->linux_aio, ctx);
laio_cleanup(ctx->linux_aio);
ctx->linux_aio = NULL;
}
#endif
assert(QSLIST_EMPTY(&ctx->scheduled_coroutines));
qemu_bh_delete(ctx->co_schedule_bh);
/* There must be no aio_bh_poll() calls going on */
assert(QSIMPLEQ_EMPTY(&ctx->bh_slice_list));
while ((bh = aio_bh_dequeue(&ctx->bh_list, &flags))) {
/*
* qemu_bh_delete() must have been called on BHs in this AioContext. In
* many cases memory leaks, hangs, or inconsistent state occur when a
* BH is leaked because something still expects it to run.
*
* If you hit this, fix the lifecycle of the BH so that
* qemu_bh_delete() and any associated cleanup is called before the
* AioContext is finalized.
*/
if (unlikely(!(flags & BH_DELETED))) {
fprintf(stderr, "%s: BH '%s' leaked, aborting...\n",
__func__, bh->name);
abort();
}
g_free(bh);
}
aio_set_event_notifier(ctx, &ctx->notifier, NULL, NULL, NULL);
event_notifier_cleanup(&ctx->notifier);
qemu_rec_mutex_destroy(&ctx->lock);
timerlistgroup_deinit(&ctx->tlg);
unregister_aiocontext(ctx);
aio_context_destroy(ctx);
/* aio_context_destroy() still needs the lock */
qemu_lockcnt_destroy(&ctx->list_lock);
}
static GSourceFuncs aio_source_funcs = {
aio_ctx_prepare,
aio_ctx_check,
aio_ctx_dispatch,
aio_ctx_finalize
};
GSource *aio_get_g_source(AioContext *ctx)
{
g_source_ref(&ctx->source);
return &ctx->source;
}
ThreadPoolAio *aio_get_thread_pool(AioContext *ctx)
{
if (!ctx->thread_pool) {
ctx->thread_pool = thread_pool_new_aio(ctx);
}
return ctx->thread_pool;
}
#ifdef CONFIG_LINUX_AIO
LinuxAioState *aio_setup_linux_aio(AioContext *ctx, Error **errp)
{
if (!ctx->linux_aio) {
ctx->linux_aio = laio_init(errp);
if (ctx->linux_aio) {
laio_attach_aio_context(ctx->linux_aio, ctx);
}
}
return ctx->linux_aio;
}
LinuxAioState *aio_get_linux_aio(AioContext *ctx)
{
assert(ctx->linux_aio);
return ctx->linux_aio;
}
#endif
void aio_notify(AioContext *ctx)
{
/*
* Write e.g. ctx->bh_list before writing ctx->notified. Pairs with
* smp_mb() in aio_notify_accept().
*/
smp_wmb();
qatomic_set(&ctx->notified, true);
/*
* Write ctx->notified (and also ctx->bh_list) before reading ctx->notify_me.
* Pairs with smp_mb() in aio_ctx_prepare or aio_poll.
*/
smp_mb();
if (qatomic_read(&ctx->notify_me)) {
event_notifier_set(&ctx->notifier);
}
}
void aio_notify_accept(AioContext *ctx)
{
qatomic_set(&ctx->notified, false);
/*
* Order reads of ctx->notified (in aio_context_notifier_poll()) and the
* above clearing of ctx->notified before reads of e.g. bh->flags. Pairs
* with smp_wmb() in aio_notify.
*/
smp_mb();
}
static void aio_timerlist_notify(void *opaque, QEMUClockType type)
{
aio_notify(opaque);
}
static void aio_context_notifier_cb(EventNotifier *e)
{
AioContext *ctx = container_of(e, AioContext, notifier);
event_notifier_test_and_clear(&ctx->notifier);
}
/* Returns true if aio_notify() was called (e.g. a BH was scheduled) */
static bool aio_context_notifier_poll(void *opaque)
{
EventNotifier *e = opaque;
AioContext *ctx = container_of(e, AioContext, notifier);
/*
* No need for load-acquire because we just want to kick the
* event loop. aio_notify_accept() takes care of synchronizing
* the event loop with the producers.
*/
return qatomic_read(&ctx->notified);
}
static void aio_context_notifier_poll_ready(EventNotifier *e)
{
/* Do nothing, we just wanted to kick the event loop */
}
static void co_schedule_bh_cb(void *opaque)
{
AioContext *ctx = opaque;
QSLIST_HEAD(, Coroutine) straight, reversed;
QSLIST_MOVE_ATOMIC(&reversed, &ctx->scheduled_coroutines);
QSLIST_INIT(&straight);
while (!QSLIST_EMPTY(&reversed)) {
Coroutine *co = QSLIST_FIRST(&reversed);
QSLIST_REMOVE_HEAD(&reversed, co_scheduled_next);
QSLIST_INSERT_HEAD(&straight, co, co_scheduled_next);
}
while (!QSLIST_EMPTY(&straight)) {
Coroutine *co = QSLIST_FIRST(&straight);
QSLIST_REMOVE_HEAD(&straight, co_scheduled_next);
trace_aio_co_schedule_bh_cb(ctx, co);
/* Protected by write barrier in qemu_aio_coroutine_enter */
qatomic_set(&co->scheduled, NULL);
qemu_aio_coroutine_enter(ctx, co);
}
}
AioContext *aio_context_new(Error **errp)
{
ERRP_GUARD();
int ret;
AioContext *ctx;
/*
* ctx is freed by g_source_unref() (e.g. aio_context_unref()). ctx's
* resources are freed as follows:
*
* 1. By aio_ctx_finalize() after aio_context_new() has returned and set
* ->initialized = true.
*
* 2. By manual cleanup code in this function's error paths before goto
* fail.
*
* Be careful to free resources in both cases!
*/
ctx = (AioContext *) g_source_new(&aio_source_funcs, sizeof(AioContext));
QSLIST_INIT(&ctx->bh_list);
QSIMPLEQ_INIT(&ctx->bh_slice_list);
ret = event_notifier_init(&ctx->notifier, false);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to initialize event notifier");
goto fail;
}
/*
* Resources cannot easily be freed manually after aio_context_setup(). If
* you add any new resources to AioContext, it's probably best to acquire
* them before aio_context_setup().
*/
if (!aio_context_setup(ctx, errp)) {
event_notifier_cleanup(&ctx->notifier);
goto fail;
}
g_source_set_can_recurse(&ctx->source, true);
qemu_lockcnt_init(&ctx->list_lock);
ctx->co_schedule_bh = aio_bh_new(ctx, co_schedule_bh_cb, ctx);
QSLIST_INIT(&ctx->scheduled_coroutines);
aio_set_event_notifier(ctx, &ctx->notifier,
aio_context_notifier_cb,
aio_context_notifier_poll,
aio_context_notifier_poll_ready);
#ifdef CONFIG_LINUX_AIO
ctx->linux_aio = NULL;
#endif
ctx->thread_pool = NULL;
qemu_rec_mutex_init(&ctx->lock);
timerlistgroup_init(&ctx->tlg, aio_timerlist_notify, ctx);
ctx->poll_max_ns = 0;
ctx->poll_ns = 0;
ctx->poll_grow = 0;
ctx->poll_shrink = 0;
ctx->aio_max_batch = 0;
ctx->thread_pool_min = 0;
ctx->thread_pool_max = THREAD_POOL_MAX_THREADS_DEFAULT;
register_aiocontext(ctx);
ctx->initialized = true;
return ctx;
fail:
g_source_unref(&ctx->source);
return NULL;
}
void aio_co_schedule(AioContext *ctx, Coroutine *co)
{
trace_aio_co_schedule(ctx, co);
const char *scheduled = qatomic_cmpxchg(&co->scheduled, NULL,
__func__);
if (scheduled) {
fprintf(stderr,
"%s: Co-routine was already scheduled in '%s'\n",
__func__, scheduled);
abort();
}
/* The coroutine might run and release the last ctx reference before we
* invoke qemu_bh_schedule(). Take a reference to keep ctx alive until
* we're done.
*/
aio_context_ref(ctx);
QSLIST_INSERT_HEAD_ATOMIC(&ctx->scheduled_coroutines,
co, co_scheduled_next);
qemu_bh_schedule(ctx->co_schedule_bh);
aio_context_unref(ctx);
}
typedef struct AioCoRescheduleSelf {
Coroutine *co;
AioContext *new_ctx;
} AioCoRescheduleSelf;
static void aio_co_reschedule_self_bh(void *opaque)
{
AioCoRescheduleSelf *data = opaque;
aio_co_schedule(data->new_ctx, data->co);
}
void coroutine_fn aio_co_reschedule_self(AioContext *new_ctx)
{
AioContext *old_ctx = qemu_get_current_aio_context();
if (old_ctx != new_ctx) {
AioCoRescheduleSelf data = {
.co = qemu_coroutine_self(),
.new_ctx = new_ctx,
};
/*
* We can't directly schedule the coroutine in the target context
* because this would be racy: The other thread could try to enter the
* coroutine before it has yielded in this one.
*/
aio_bh_schedule_oneshot(old_ctx, aio_co_reschedule_self_bh, &data);
qemu_coroutine_yield();
}
}
void aio_co_wake(Coroutine *co)
{
AioContext *ctx;
/* Read coroutine before co->ctx. Matches smp_wmb in
* qemu_coroutine_enter.
*/
smp_read_barrier_depends();
ctx = qatomic_read(&co->ctx);
aio_co_enter(ctx, co);
}
void aio_co_enter(AioContext *ctx, Coroutine *co)
{
if (ctx != qemu_get_current_aio_context()) {
aio_co_schedule(ctx, co);
return;
}
if (qemu_in_coroutine()) {
Coroutine *self = qemu_coroutine_self();
assert(self != co);
QSIMPLEQ_INSERT_TAIL(&self->co_queue_wakeup, co, co_queue_next);
} else {
qemu_aio_coroutine_enter(ctx, co);
}
}
void aio_context_ref(AioContext *ctx)
{
g_source_ref(&ctx->source);
}
void aio_context_unref(AioContext *ctx)
{
g_source_unref(&ctx->source);
}
QEMU_DEFINE_STATIC_CO_TLS(AioContext *, my_aiocontext)
AioContext *qemu_get_current_aio_context(void)
{
AioContext *ctx = get_my_aiocontext();
if (ctx) {
return ctx;
}
if (bql_locked()) {
/* Possibly in a vCPU thread. */
return qemu_get_aio_context();
}
return NULL;
}
void qemu_set_current_aio_context(AioContext *ctx)
{
assert(!get_my_aiocontext());
set_my_aiocontext(ctx);
}
void aio_context_set_thread_pool_params(AioContext *ctx, int64_t min,
int64_t max, Error **errp)
{
if (min > max || max <= 0 || min < 0 || min > INT_MAX || max > INT_MAX) {
error_setg(errp, "bad thread-pool-min/thread-pool-max values");
return;
}
ctx->thread_pool_min = min;
ctx->thread_pool_max = max;
if (ctx->thread_pool) {
thread_pool_update_params(ctx->thread_pool, ctx);
}
}