# Tar Gap Analysis ## Scope This document compares the current Tar documentation, tests, and code paths in SharpCompress. It is intentionally implementation-focused. The goal is to identify mismatches, omissions, and incomplete areas in the current SharpCompress Tar support. Primary references: - `docs/FORMATS.md` - `src/SharpCompress/Factories/TarFactory.cs` - `src/SharpCompress/Factories/TarWrapper.cs` - `src/SharpCompress/Archives/Tar/` - `src/SharpCompress/Readers/Tar/` - `src/SharpCompress/Writers/Tar/` - `src/SharpCompress/Common/Tar/` - `tests/SharpCompress.Test/Tar/` ## Implemented Since Baseline - `Tar.XZ` is now documented as read-only (`Writer API = N/A`) in `docs/FORMATS.md`. - Local PAX extended headers (`x`) are now implemented on the read path for selected keys. - Global PAX extended headers (`g`) are now implemented on the read path for selected keys. - Tar tests now include local PAX coverage for reader/archive sync and async paths. - Tar tests now include global PAX coverage for reader/archive sync and async paths. - `TarWriterOptions.HeaderFormat` is now honored in sync and async file and directory write paths. - Tar tests now cover `USTAR` and `GNU_TAR_LONG_LINK`, including USTAR long-name failure scenarios. - Symlink coverage now includes `TarWithSymlink.tar.gz` for reader sync and async paths. - Tar tests now explicitly cover unsupported tar wrapper compression writes (`Xz`, `ZStandard`, `Lzw`) for sync and async writer paths. - `TarArchive.OpenAsyncArchive(Stream)` now enforces the same seekable-stream contract as `TarArchive.OpenArchive(Stream)`. - Sparse handling remains explicitly unsupported. - Non-modeled PAX keys remain explicitly unsupported. ## Claimed vs Actual Support ### `Tar.XZ` is read-only `tar.xz` is supported for reading, but not for writing. Actual implementation in `src/SharpCompress/Writers/Tar/TarWriter.cs` does not support `CompressionType.Xz`. The writer throws `InvalidFormatException` for any compression type outside: - `None` - `GZip` - `BZip2` - `LZip` Impact: - Tar write support is narrower than Tar read support - `tar.xz` creation is not available through the built-in Tar writer Recommended action: - keep the format table marked `N/A` for Tar.XZ writer support ## Read-Path Gaps ### Local and global PAX headers are implemented for selected keys Local (`x`) and global (`g`) POSIX PAX extended headers are now supported on the read path. Supported keys in the current implementation: - `path` - `linkpath` - `size` - `mtime` - `uid` - `gid` - `mode` Remaining gap: - non-modeled PAX keys are still ignored - PAX sparse extensions are still unsupported Recommended action: - keep supported-key boundaries documented and test-covered - keep unsupported-key behavior explicit in docs ### Sparse files are not semantically implemented `EntryType` defines `SparseFile`, but the read path does not contain sparse map handling or sparse reconstruction logic. PAX sparse extensions are also unsupported (for example `GNU.sparse.*` and similar sparse metadata keys). Evidence: - `src/SharpCompress/Common/Tar/Headers/EntryType.cs` - no sparse-specific code in `TarHeader`, `TarEntry`, `TarFilePart`, or `TarArchive` - no sparse tests Impact: - sparse entries may be treated as ordinary entries rather than sparse files with holes Recommended action: - keep sparse support explicitly documented as unsupported - add sparse fixtures and tests only when sparse reconstruction is implemented ### Non-modeled PAX keys are still unsupported PAX parsing is intentionally limited to modeled keys (`path`, `linkpath`, `size`, `mtime`, `uid`, `gid`, `mode`). Not currently modeled/supported: - `uname` - `gname` - `atime` - `ctime` - device-specific values and vendor keys Recommended action: - keep unsupported-key behavior documented as ignored - add support only when there is a consumer-facing object model for it ### Device and FIFO semantics are not surfaced The entry type enum includes `CharDevice`, `BlockDevice`, and `Fifo`, but the public tar model does not expose device metadata semantics. Impact: - such entries may not round-trip meaningfully through the API - behavior is undocumented and untested Recommended action: - either document them as raw/unmodeled entry types or add dedicated support ## Write-Path Gaps ### `HeaderFormat` consistency is resolved `TarWriterOptions.HeaderFormat` is now applied across: - sync file writes - sync directory writes - async file writes - async directory writes Regression tests now cover both `USTAR` and `GNU_TAR_LONG_LINK` behavior. ### No public link-writing support The read path supports symbolic and hard link targets through `TarEntry.LinkTarget`, but the write API exposes only regular file and directory creation. Impact: - symlink and hardlink tar archives cannot be created through the current public Tar writer API Recommended action: - either document this as a deliberate limitation or add link-writing APIs ### Metadata round-trip support is incomplete The writer does not round-trip rich tar metadata beyond the basic fields needed for file and directory entries. Current write behavior sets fixed defaults for some fields such as mode, owner id, and group id. Impact: - modified or newly created tar archives may lose metadata fidelity relative to the original archive Recommended action: - document current metadata write behavior clearly - expand metadata support only if needed by consumers ### No write support for some detected wrappers The detection and read path supports wrappers that the write path does not support. | Wrapper | Read support | Write support | | ------- | ------------ | ------------- | | `tar.xz` | Yes | No | | `tar.zst` | Yes | No | | `tar.Z` | Yes | No | This is not inherently wrong, but it should be clearly documented everywhere support is summarized. ## Sync and Async API Inconsistencies ### Seekability contract alignment is resolved `TarArchive.OpenArchive(Stream)` and `TarArchive.OpenAsyncArchive(Stream)` now both enforce the same seekable-stream contract and throw `ArgumentException` for non-seekable input. Tar tests include an async regression case for non-seekable stream open. ### Header format alignment between sync and async is resolved Sync and async Tar writer paths now both honor `TarWriterOptions.HeaderFormat`, and matching tests are present for both paths. ## Test Coverage Gaps ### Symlink coverage is now present for reader paths Symlink behavior is now asserted for sync and async reader paths using: - `tests/TestArchives/Archives/TarWithSymlink.tar.gz` Archive-path symlink assertions currently rely on small tar fixtures rather than this large compressed sample. ### Header format coverage is now present Tar tests now cover: - `TarWriterOptions.HeaderFormat = USTAR` - `TarWriterOptions.HeaderFormat = GNU_TAR_LONG_LINK` - long-name failure in USTAR mode - long-name success in GNU mode through sync and async writer paths ### No tests for sparse tar semantics Local and global PAX coverage now exists, but there is still no evidence of coverage for: - sparse tar entries - sparse PAX extensions Impact: - unsupported or partial behavior is neither documented by tests nor protected from regression Recommended action: - either add fixtures and tests or document these as unsupported with no test coverage ### Unsupported-wrapper writer coverage is now present Tar writer tests now explicitly verify `InvalidFormatException` for unsupported tar wrapper compression types: - `CompressionType.Xz` - `CompressionType.ZStandard` - `CompressionType.Lzw` Coverage exists in both sync and async writer test paths. ## Documentation Gaps ### Current format documentation is too coarse for Tar `docs/FORMATS.md` summarizes support at the wrapper level, but Tar behavior depends on more than wrapper compression. Missing implementation-specific details include: - GNU long-name and long-link support - USTAR prefix handling - oldgnu numeric quirk handling - partial PAX support boundaries (selected local/global keys supported) - missing sparse support - reader vs archive behavior differences for compressed tar - file-size requirements for writing from non-seekable sources Recommended action: - keep `docs/FORMATS.md` high-level - add and maintain a dedicated Tar spec document for details ### The current docs do not call out partial support clearly The codebase supports some tar dialect features and not others, but the docs do not separate: - fully supported - partially supported - unsupported Recommended action: - use an explicit feature matrix in the Tar documentation ## Recommended Follow-Ups ### Priority 1 - Improve metadata round-trip behavior only if there is a consumer need - Evaluate whether non-modeled PAX keys should remain ignored or be surfaced in a future metadata API ## Summary The SharpCompress Tar implementation is strong on common read scenarios and basic write scenarios, but the current gaps fall into four categories: - documentation overstating or under-describing support - incomplete feature coverage for less common tar dialect features - intentionally deferred metadata and API-surface decisions - test coverage holes around advanced tar metadata features `docs/TAR_SPEC.md` should be treated as the implementation baseline. This document identifies where that baseline is incomplete, inconsistent, or incorrectly reflected elsewhere in the repository.