Networking: Added the WD8013EP/A MCA nic, which is more supported than the WD80x3ET/A plus an initial ram size configuration before POS configuration.
Sound: Added the Reply MCA OEM of SB16 with its own MCA POS ID and properly implemented the IRQ's and DMA's of the AdLib Gold in its EEPROM plus an initial configurable setting for them and an initial DRQ implementation into said card.
Changes to device_t struct to accomodate the upcoming PCI IRQ arbitration rewrite;
Added device.c/h API to obtain name from the device_t struct;
Significant changes to win/win_settings.c to clean up the code a bit and fix bugs;
Ported all the CPU and AudioPCI commits from PCem;
Added an API call to allow ACPI soft power off to gracefully stop the emulator;
Removed the Siemens PCD-2L from the Dev branch because it now works;
Removed the Socket 5 HP Vectra from the Dev branch because it now works;
Fixed the Compaq Presario and the Micronics Spitfire;
Give the IBM PC330 its own list of 486 CPU so it can have DX2's with CPUID 0x470;
SMM fixes;
Rewrote the SYSENTER, SYSEXIT, SYSCALL, and SYSRET instructions;
Changed IDE reset period to match the specification, fixes#929;
The keyboard input and output ports are now forced in front of the queue when read, fixes a number of bugs, including the AMI Apollo hanging on soft reset;
Added the Intel AN430TX but Dev branched because it does not work;
The network code no longer drops packets if the emulated network card has failed to receive them (eg. when the buffer is full);
Changes to PCI card adding and renamed some PCI slot types, also added proper AGP bridge slot types;
USB UHCI emulation is no longer a stub (still doesn't fully work, but at least Windows XP chk with Debug no longer ASSERT's on it);
Fixed NVR on the the SMC FDC37C932QF and APM variants;
A number of fixes to Intel 4x0 chipsets, including fixing every register of the 440LX and 440EX;
Some ACPI changes.
- 86Box's own headers go to /86box
- munt's public interface goes to /mt32emu
- all slirp headers go to /slirp (might want to consider using only its public inteface)
- single file headers from other projects go in include root
Reworked a few things and re-implemented memory write protection in the SCAT emulation, to require less unusual mappings;
Removed two files that should not be there;
Made sure all graphics cards' memory mappings are mapped as MEM_MAPPING_EXTERNAL;
Added MEM_MAPPING_ROMCS flag to signal that a mapping responds to MEMCS* and made the BIOS and Intel flash mappings use it.
Cleaned up the parallel port emulation, added IRQ support, and made enabling/disabling per port;
Added the Award 430NX and the Intel Classic/PCI (Alfredo, 420TX);
Finished the 586MC1;
Added 8087 emulation;
Moved Cyrix 6x86'es to the Dev branch;
Sanitized/cleaned up memregs.c/h and intel.c/h;
Split the chipsets from machines and sanitized Port 92 emulation;
Added support for the 15bpp mode to the Compaq ATI 28800;
Moved the MR 386DX and 486 machines to the Dev branch;
Ported the new dynamic recompiler from PCem, but it remains in Dev branch until after v2.00;
Ported the new timer code from PCem;
Cleaned up the CPU table of unused stuff and better optimized its structure;
Ported the Open-XT and Open-AT from VARCem, the Open-AT is in the Dev branch;
Ported the XT MFM controller rewrite and adding of more controllers (incl. two RLL ones), from VARCem;
Added the AHA-1540A and the BusTek BT-542B;
Moved the Sumo SCSI-AT to the Dev branch;
Minor IDE, FDC, and floppy drive code clean-ups;
Made NCR 5380/53C400-based cards' BIOS address configurable;
Got rid of the legacy romset variable;
Unified (video) buffer and buffer32 into one and make the unified buffer 32-bit;
Added the Amstead PPC512 per PCem patch by John Elliott;
Switched memory mapping granularity from 16k to 4k (less than 1k not possible due to internal pages);
Rewrote the CL-GD 54xx blitter, fixes Win-OS/2 on the 54x6 among other thing;
Added the Image Manager 1024 and Professional Graphics Controller per PCem patch by John Elliott and work done on VARCem;
Added Headland HT-216, GC-205 and Video 7 VGA 1024i emulation based on PCem commit;
Implemented the fuction keys for the Toshiba T1000/T1200/T3100 enhancement;
Amstrad MegaPC does now works correctly with non-internal graphics card;
The SLiRP code no longer casts a packed struct type to a non-packed struct type;
The Xi8088 and PB410a no longer hang on 86Box when PS/2 mouse is not present;
The S3 Virge on BeOS is no longer broken (was broken by build #1591);
OS/2 2.0 build 6.167 now sees key presses again;
Xi8088 now work on CGA again;
86F images converted from either the old or new variants of the HxC MFM format now work correctly;
Hardware interrupts with a vector of 0xFF are now handled correctly;
OPTi 495SX boards no longer incorrectly have 64 MB maximum RAM when 32 MB is correct;
Fixed VNC keyboard input bugs;
Fixed AT RTC periodic interrupt - Chicago 58s / 73f / 73g / 81 MIDI play no longer hangs with the build's own VTD driver;
Fixed mouse polling with internal mice - Amstrad and Olivetti mice now work correctly;
Triones ATAPI DMA driver now correctly reads a file at the end of a CD image with a sectors number not divisible by 4;
Compaq Portable now works with all graphics cards;
Fixed various MDSI Genius bugs;
Added segment limit checks and improved page fault checks for several CPU instructions - Memphis 15xx WINSETUP and Chicago 58s WINDISK.CPL no longer issue a GPF, and some S3 drivers that used to have glitches, now work correctly;
Further improved the 808x emulation, also fixes the noticably choppy sound when using 808x CPU's, also fixes#355;
OS/2 installer no logner locks up on splash screen on PS/2 Model 70 and 80, fixes#400.
Fixed several Amstead bugs, GEM no longer crashes on the Amstrad 1640, fixes#391.
Ported John Elliott's Amstrad fixes and improvement from PCem, and fixed the default language so it's correctly Engliish, fixes#278, fixes#389.
Fixed a minor IDE timing bug, fixes#388.
Fixed Toshiba T1000 RAM issues, fixes#379.
Fixed EGA/(S)VGA overscan border handling, fixes#378;
Got rid of the now long useless IDE channel 2 auto-removal, fixes#370;
Fixed the BIOS files used by the AMSTRAD PC1512, fixes#366;
Ported the Unicode CD image file name fix from VARCem, fixes#365;
Fixed high density floppy disks on the Xi8088, fixes#359;
Fixed some bugs in the Hercules emulation, fixes#346, fixes#358;
Fixed the SCSI hard disk mode sense pages, fixes#356;
Removed the AMI Unknown 386SX because of impossibility to identify the chipset, closes#349;
Fixed bugs in the serial mouse emulation, fixes#344;
Compiled 86Box binaries now include all the required .DLL's, fixes#341;
Made some combo boxes in the Settings dialog slightly wider, fixes#276.
Re-added the higher-clocked 8088's;
Fixed PIT timings for 808x CPU's that don't run off an 14.3 MHz crystal;
Fixed CGA cursor half blink rate setting - fixes insane cursor blinking speed in several cases;
DMA now issues DMA refresh DRAM states on every channel;
Gave the 1982 years to the previously emulated PC and XT's names, and added the 1981 IBM PC and 1986 IBM XT;
Redid the PPI DIP switch redout for the PC/XT keyboard controller;
Fixed a segmentation fault in hdc_ide.c that tended to occur on hard reset after switching machines;
Implemented the port 3B8 color disable on the Hercules, Hercules Plus, and Hercules InColor cards;
Fixed the joystick configuration dialog strings;
Fixed a problem that would have prevented win_sdl.c from compiling with logging enabled.
Fixed PC speaker sound volume in PIT mode 0;
A few CPU emulation clean-ups;
Hard disk controller changing redone in a less messy way;
Re-added the long-missing key send delay handling to the XT keyboard handler;
Fixed a bug that was causing SLiRP not to work when compiled with MingW/GCC 7.3.0-2 or newer;
Some serial mouse and port fixes;
A lot of changes to printer emulation, mostly based on DOSBox-X;
Printer PNG writer now uses statically linked libpng;
Added support for the HxC MFM floppy image format and upped 86F format version to 2.12;
Ported various things from PCem and some from VARCem;
Added the S3 86c801/805 emulation (patch from TheCollector1995);
Fixed and renamed the EGA monitor options;
Better synchronized the 808x to the PIT and the CGA;
Fixed the CGA wait state calculation;
Cleaned up some things in mem.c;
Fixed some things in the floppy emulation to make VisiOn get the correct errors from the copy protection disk;
Fixed several renderer-related bugs, including the SDL2 renderer's failure to take screenshots;
The Jenkins builds are now compiled with MingW/GCC 7.4.0-1 and include all the required DLL's.
Extensively cleaned up and changed the CD-ROM code;
Removed CD-ROM IOCTTL (it was causing performance and stability issues);
Turned a lot of things into device_t's;
Added the PS/1 Model 2011 XTA and standalone XTA hard disk controllers, ported from Varcem;
Numerous FDC fixes for the PS/1 Model 2121;
NVR changes ported from Varcem;
The PCap code no longer requires libpcap to be compiled;
Numerous fixes to various SCSI controllers;
Updated NukedOPL to 1.8;
Fixes to OpenAL initialization and closing, should give less Audio issues now;
Revorked parts of the common (S)VGA code (also based on code from QEMU);
Removed the Removable SCSI hard disks (they were a never finished experiment so there was no need to keep them there);
Cleaned up the SCSI hard disk and Iomega ZIP code (but more cleanups of that are coming in the future);
In some occasions (IDE hard disks in multiple sector mode and SCSI hard disks) the status bar icon is no longer updated, should improve performance a bit;
Redid the way the tertiary and quaternary IDE controllers are configured (and they are now device_t's);
Extensively reworked the IDE code and fixed quite a few bugs;
Fixes to XT MFM, AT MFM, and AT ESDI code;
Some changes to XTIDE and MCA ESDI code;
Some fixes to the CD-ROM image handler.
Replaced the Cirrus Logic code with the latest code from TheCollector1995 - the CL-GD 5428 is now fully working, as is the CL-GD 5429;
Minor clean-up in the AHA/BusLogic BIOS commands code;
Slightly rewritten mem_readb_phys_dma() and mem_writeb_phys_dma().
Applied some more of greatpsycho's CPU patches;
Reworked the PS/2 Model 80 split memory block handling and removed the top 256k remap from it (that's what the split memory block is for) - fixes OS/2 2.x on that machine.
Fixed the behavior of the CD-ROM GET CONFIGURATION command when unimplemented features are requested;
Fixed the behavior of the CD-ROM READ DVD STRUCTURE command in some situations and made it correctly report 05/30/02 for incompatible format;
Reworked the PS/2 Model 80 Type 2 memory handling a bit;
The emulator now allocates the few MB of space needed for pages for the entire 4 GB RAM space at the startup and only memset's it to 0 on hard reset - should make sure DMA page reads from/writes to memory-mapped devices no longer crash the emulator on invalidating the memory range;
Applied app applicable PCem patches;
The PS/1 Model 2133 now also applies PS/2-style NMI mask handling - fixes the 486 recompiler on this machine;
Added the missing #include of "cpu/cpu.h" in io.c, fixes compiling when I/O tracing is enabled.
IBM.H is gone, video stuff re-organized. Keyboard stuff reorganized.
Machines that have their own video, mouse and/or keyboard now have all this in their machine file.
Fixed and other cleanups here and there.
