1. The SCSI ID is now more correct about about the difference between physical unit number and actual SCSI ID. This should fix boot freezes on NT 1991 builds for x86 using said card, as well as keeping compatibility the same as before.
1. Finally add the ATI 8514/A Ultra add-on BIOS in both ISA and MCA variants (despite the ROM page failure on POST).
2. Fixed a mode switch bug in the Mach8 (both add-on and vga combo) when exiting the Win3.x GUI using the native drivers.
3. Corrected (best possible) the eeprom load of the Mach8 products.
4. Partial implementation of the FIFO on the 8514/A compatible products including Mach8/32 and plain IBM 8514/A.
1. ATI Extended 8514/A mode may not use bit 5 of ATI reg 0xb0 sometimes but at the same time it won't use the standard VGA way of setting up 256+ colors, therefore, in the VGA DAC writes, use standard VGA way to revert to VGA mode in the writes instead of relying on bit 5 of ATI reg 0xb0 being enabled/disabled there. Fixes mode switches in VLB/PCI configurations using Windows 9x and possibly other stuff, ISA is unaffected and still works fine.
2. Added more logs and and remove/set I/O handlers correctly for the PCI side.
Mark the ATI extended 8514/A mode accordingly (that is, if bit 5 of ATI reg 0xb0 and using ATI extended ports at the same time). Fixes wrong colors in some instances using standard IBM 8514/A drivers on Mach32.
1. Added the missing call to mach32_updatemapping from port 0x3CF through its index 6.
2. If the accelerator DAC is active and the extended 256 color bit is on too then enable 8514/A mode when needed, otherwise it's VGA mode or decided by the passthrough/clock selection ports.
3. VGA DAC reads are redirected to the 8514/A DAC reads only when 8514/A mode is on.
