This defines the flags for setting the PMK to the driver and the
capability flag for this so that the user space program can figure out
whether the target driver wants to do 4-way hand shake by itself and
pass the PMK which is needed before 4-way handshake to the driver.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch allows to disable FAT channel in specific configurations.
For example the configuration (8, +1), (primary channel 8, extension
channel 12) isn't permitted in U.S., but (8, -1), (primary channel 8,
extension channel 4) is. When FAT channel configuration is not
permitted, FAT channel should be reported as not supported in the
capabilities of the HT IE in association request. And sssociation is
performed on 20Mhz channel.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The tty layer provides a callback that is used when the line discipline
is changed. Some hardware uses this to configure hardware specific
features such as IrDA mode on serial ports. Unfortunately the serial
layer does not provide this feature or pass it down to drivers.
Blackfin used to hack around this by rewriting the tty ops, but those are
now properly shared and const so the hack fails. Instead provide the
proper operations.
This change plus a follow up from the Blackfin guys is needed to avoid
blackfin losing features in this release.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
make mptable to be consistent with acpi routing, so we could:
1. kexec kernel with acpi=off
2. work around BIOSes where acpi routing is working, but mptable is
not right, so can use kernel/kexec to start other OSes that don't have
good acpi support.
command line: update_mptable
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
we don't need to call memory_present that early.
numa and sparse will call memory_present later and might
even fail, it will call memory_present for the full range.
also for sparse it will call alloc_bootmem ... before we set up bootmem.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so every element will represent 64M instead of 256M.
AMD opteron could have HW memory hole remapping, so could have
[0, 8g + 64M) on node0. Reduce element size to 64M to keep that on node 0
Later we need to use find_e820_area() to allocate memory_node_map like
on 64-bit. But need to move memory_present out of populate_mem_map...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix this build bug:
drivers/acpi/pci_irq.c: In function 'acpi_pci_irq_enable':
drivers/acpi/pci_irq.c:574: error: implicit declaration of function 'mp_config_acpi_gsi'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since mmc_spi.h uses irqreturn_t type, it should include appropriate
header, otherwise build will break if users didn't include it (some of
them do not use interrupts).
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
8250 Serial Driver: revert extra IRQ flag definition patch
Blackfin arch: update anomaly headers from toolchain trunk
Blackfin arch: Remove bad and usless code
Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527
Blackfin arch: Fix typo. it should be _outsw_8
Blackfin arch: Cleanup no functional changes
For the additonal exception levels (critical, debug, machine check) on
40x/book-e we were using "static" allocations of the stack in the
associated head.S.
Move to a runtime allocation to make the code a bit easier to read as
we mimic how we handle IRQ stacks. Its also a bit easier to setup the
stack with a "dummy" thread_info in C code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Paul Mackerras <paulus@samba.org>
The power manager and core clock registers aren't present in PXA3
CPUs. Move them out of pxa-regs.h into pxa2xx-regs.h, and include
pxa2xx-regs.h where necessary.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adds support for the USB High Speed Device Port on the AT91SAM9RL
system on chip. The AT91SAM9RL uses the same UDPHS IP as the AVR32 and
the AT91CAP9 (atmel_usba_udc driver).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is patch 2 of 2 adding support for the USB High Speed Device Port
on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP
as the AVR32 and the AT91SAM9RL.
This patch declares the UDPHS ressources in the at91cap9 (cpu and
adk board) files, wires up the atmel_usba_udc driver to them,
and activates the driver in the defconfig.
Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is patch 1 of 2 adding support for the USB High Speed Device Port
on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP
as the AVR32 and the AT91SAM9RL.
This patch makes the generic AT91 adaptations, mainly dealing with
the addition of the UDPHS UTMI clock.
Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The current __raw_write_can_lock macro tests whether the lock can be
locked by checking if it is equal to 0x80000000, whereas the lock
should be lockable if its value is 0 i.e. unlocked state is
represented by 0. Hence the macro should test the value of lock
against 0 and not 0x80000000.
Signed-off-by: Surinder Pal Singh <srplsnh@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Some additional alternate gpio definitions relating
to FFUART and USB on the pxa27x. These are used on
the xbow imote2 platform.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Define recently added XEN_ELFNOTEs, and use them appropriately.
Most significantly, this enables domain checkpointing (xm save -c).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update the UV address macros to better describe the
fields of UV physical addresses. Improve comments
in the header files. Add additional MMR definitions.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In dynamic ftrace, the mcount function starts off pointing to a stub
function that just returns.
On start up, the call to the stub is modified to point to a "record_ip"
function. The job of the record_ip function is to add the function to
a pre-allocated hash list. If the function is already there, it simply is
ignored, otherwise it is added to the list.
Later, a ftraced daemon wakes up and calls kstop_machine if any functions
have been recorded, and changes the calls to the recorded functions to
a simple nop. If no functions were recorded, the daemon goes back to sleep.
The daemon wakes up once a second to see if it needs to update any newly
recorded functions into nops. Usually it does not, but if a lot of code
has been executed for the first time in the kernel, the ftraced daemon
will call kstop_machine to update those into nops.
The problem currently is that there's no way to stop the daemon from doing
this, and it can cause unneeded latencies (800us which for some is bothersome).
This patch adds a new file /debugfs/tracing/ftraced_enabled. If the daemon
is active, reading this will return "enabled\n" and "disabled\n" when the
daemon is not running. To disable the daemon, the user can echo "0" or
"disable" into this file, and "1" or "enable" to re-enable the daemon.
Since the daemon is used to convert the functions into nops to increase
the performance of the system, I also added that anytime something is
written into the ftraced_enabled file, kstop_machine will run if there
are new functions that have been detected that need to be converted.
This way the user can disable the daemon but still be able to control the
conversion of the mcount calls to nops by simply,
"echo 0 > /debugfs/tracing/ftraced_enabled"
when they need to do more conversions.
To see the number of converted functions:
"cat /debugfs/tracing/dyn_ftrace_total_info"
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This breaks up the mutual inclusion between headers ptrace.h and vm86.h
by moving some small part of vm86.h which is needed by ptrace.h into
processor-flags.h.
We also try to move #include lines to the top.
This has been compile tested on x86_32 and x86_64 defconfig, and run
through 'make headers_check'.
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Tue, 27 May 2008, Linus Torvalds wrote:
>
> Expecting people to fix up all drivers is simply not going to happen. And
> serializing things shouldn't be *that* expensive. People who cannot take
> the expense can continue to use the magic __raw_writel() etc stuff.
Of course, for non-x86, you kind of have to expect drivers to be
well-behaved, so non-x86 can probably avoid this simply because there are
less relevant drivers involved.
Here's a UNTESTED patch for x86 that may or may not compile and work, and
which serializes (on a compiler level) the IO accesses against regular
memory accesses.
__read[bwlq]()/__write[bwlq]() are not serialized with a :"memory"
barrier, although since they still use "asm volatile" I suspect that i
practice they are probably serial too. Did not look very closely at any
generated code (only did a trivial test to see that the code looks
*roughly* correct).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce IRQx_VECTOR on 32-bit, so that #ifdef noise is kept
down. There should be no object code change.
[ mingo@elte.hu: merged to x86/irq not x86/i8259 due to x86/irq having
restructured the vector code into asm-x86/irq_vectors.h, which this
patch touches. ]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch implements PCI extended configuration space access for
AMD's Barcelona CPUs. It extends the method using CF8/CFC IO
addresses. An x86 capability bit has been introduced that is set for
CPUs supporting PCI extended config space accesses.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Audigy2 Platinum, the Analog/Digital mixer switch is inverted.
https://bugzilla.novell.com/show_bug.cgi?id=396204
The patch adds a simple workaround.
There might be another device requiring a similar fix, too (or fix for
audigy2 generically), but right now I fix only the known broken one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HPET timer's IRQ is 0 by default. So we have to select which irq
will be used by these timers. We wait to set the timer's irq until
we really open it in order to reduce the chance of conflicting with
other device.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since some of the keycodes defined in input.h have values greater
than 255 we should use unsigned shorts in keymaps.
Tested-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
As noted by Matthew Wilcox:
Kyle McMartin just tracked down a bug on parisc to a missing
"memory" clobber in the inline assembly implementation of
ip_fast_csum. The FRV, SH and Xtensa ports are also missing a
memory clobber, so I thought it would be polite to let you know.
The bug manifests as dropped network packets (obviously they have
the wrong checksum). It started appearing for parisc with GCC 4.3.
The GCC manual says:
If your assembler instructions access memory in an unpredictable
fashion, add `memory' to the list of clobbered registers. This
will cause GCC to not keep memory values cached in registers
across the assembler instruction and not optimize stores or loads
to that memory.
I see that FRV has a 400 byte memory output which may prevent this
problem from appearing, but SH and Xtensa have nothing to prevent
this bug. Hope this saves you a few days of debugging.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
AT91 has one include loop in its header files:
include/asm-arm/io.h <- include/asm-arm/arch-at91/io.h <-
include/asm-arm/io.h
Circular include dependencies are dangerous since they can result in
inconsistent definitions being provided to other code, especially if
'#ifndef' constructs are used.
Solve this by removing the offending includes. Built tested using my
AT91 configuration.
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Source code out there hard-codes a notion of what the
_LINUX_CAPABILITY_VERSION #define means in terms of the semantics of the
raw capability system calls capget() and capset(). Its unfortunate, but
true.
Since the confusing header file has been in a released kernel, there is
software that is erroneously using 64-bit capabilities with the semantics
of 32-bit compatibilities. These recently compiled programs may suffer
corruption of their memory when sys_getcap() overwrites more memory than
they are coded to expect, and the raising of added capabilities when using
sys_capset().
As such, this patch does a number of things to clean up the situation
for all. It
1. forces the _LINUX_CAPABILITY_VERSION define to always retain its
legacy value.
2. adopts a new #define strategy for the kernel's internal
implementation of the preferred magic.
3. deprecates v2 capability magic in favor of a new (v3) magic
number. The functionality of v3 is entirely equivalent to v2,
the only difference being that the v2 magic causes the kernel
to log a "deprecated" warning so the admin can find applications
that may be using v2 inappropriately.
[User space code continues to be encouraged to use the libcap API which
protects the application from details like this. libcap-2.10 is the first
to support v3 capabilities.]
Fixes issue reported in https://bugzilla.redhat.com/show_bug.cgi?id=447518.
Thanks to Bojan Smojver for the report.
[akpm@linux-foundation.org: s/depreciate/deprecate/g]
[akpm@linux-foundation.org: be robust about put_user size]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Bojan Smojver <bojan@rexursive.com>
Cc: stable@kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
reserve early numa kva, so it will not clash with new RAMDISK
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
introduce init_pg_table_start, so xen PV could specify the value.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Gcc might re-order MMIO accessors vs. surrounding consistent
memory accesses, which is a "bad thing", and could break drivers.
This fixes it by adding a "memory" clobber to the MMIO accessors,
which should prevent gcc from doing that reordering.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch lets the early real mode code look for the 'quiet' option
on the kernel command line and pass a loadflag to the decompressor.
When this flag is set, we suppress the "Decompressing Linux... Parsing
ELF... done." messages.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which
are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and
the inline stubs to the appropriate header file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
lguest: notify on empty
virtio: force callback on empty.
virtio_blk: fix endianess annotations
virtio_config: fix len calculation of config elements
virtio_net: another race with virtio_net and enable_cb
virtio: An entropy device, as suggested by hpa.
virtio_blk: allow read-only disks
lguest: fix ugly <NULL> in /proc/interrupts
virtio: set device index in common code.
virtio: virtio_pci should not set bus_id.
virtio: bus_id for devices should contain 'virtio'
Fix crash in virtio_blk during modprobe ; rmmod ; modprobe
lguest: use ioremap_cache, not ioremap
