Commit Graph

157885 Commits

Author SHA1 Message Date
Sergei Shtylyov
0454815409 pata_hpt{37x|3x2n}: fix timing register masks (take 2)
commit 5600c70e576199a7552e1c0fff43f3fe16f5566e upstream.

These drivers inherited from the older 'hpt366' IDE driver the buggy timing
register masks in their set_piomode() metods. As a result, too low command
cycle active time is programmed for slow PIO modes.  Quite fortunately, it's
later "fixed up" by the set_dmamode() methods which also "helpfully" reprogram
the command timings, usually to PIO mode 4; unfortunately, setting an UltraDMA
mode #N also reprograms already set PIO data timings, usually to MWDMA mode #
max(N, 2) timings...

However, the drivers added some breakage of their own too:  the bit that they
set/clear to control the FIFO is sometimes wrong -- it's actually the MSB of
the command cycle setup time; also, setting it in DMA mode is wrong as this
bit is only for PIO actually and clearing it for PIO modes is not needed as
no mode in any timing table has it set...

Fix all this, inverting the masks while at it, like in the 'hpt366' and
'pata_hpt366' drivers; bump the drivers' versions, accounting for recent
patches that forgot to do it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:27 -08:00
NeilBrown
daa991df23 md/bitmap: protect against bitmap removal while being updated.
commit aa5cbd103887011b4830355f88fb055f9ad2d556 upstream.

A write intent bitmap can be removed from an array while the
array is active.
When this happens, all IO is suspended and flushed before the
bitmap is removed.
However it is possible that bitmap_daemon_work is still running to
clear old bits from the bitmap.  If it is, it can dereference the
bitmap after it has been freed.

So introduce a new mutex to protect bitmap_daemon_work and get it
before destroying a bitmap.

This is suitable for any current -stable kernel.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:25 -08:00
Carsten Otte
b5939fce19 KVM: s390: Make psw available on all exits, not just a subset
commit d7b0b5eb3000c6fb902f08c619fcd673a23d8fab upstream.

This patch moves s390 processor status word into the base kvm_run
struct and keeps it up-to date on all userspace exits.

The userspace ABI is broken by this, however there are no applications
in the wild using this.  A capability check is provided so users can
verify the updated API exists.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:24 -08:00
Theodore Ts'o
92f045e675 jbd2: don't wipe the journal on a failed journal checksum
commit e6a47428de84e19fda52f21ab73fde2906c40d09 upstream.

If there is a failed journal checksum, don't reset the journal.  This
allows for userspace programs to decide how to recover from this
situation.  It may be that ignoring the journal checksum failure might
be a better way of recovering the file system.  Once we add per-block
checksums, we can definitely do better.  Until then, a system
administrator can try backing up the file system image (or taking a
snapshot) and and trying to determine experimentally whether ignoring
the checksum failure or aborting the journal replay results in less
data loss.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:23 -08:00
Feng Tang
083e53a1b8 hrtimer: Fix /proc/timer_list regression
commit 8629ea2eaba8ca0de2e38ce1b4a825e16255976e upstream.

commit 507e1231 (timer stats: Optimize by adding quick check to avoid
function calls) introduced a regression in /proc/timer_list.

/proc/timer_list shows now
 #0: <c27d46b0>, tick_sched_timer, S:01, <(null)>, /-1
instead of
 #0: <c27d46b0>, tick_sched_timer, S:01, hrtimer_start, swapper/0

Revert the hrtimer quick check for now. The optimization needs more
thought, but this is neither 2.6.32-rc7 nor stable material.

[ tglx: - Removed unrelated changes from the original patch
  	- Prevent unneccesary call to timer_stats_update_stats
	- massaged the changelog ]

Signed-off-by: Feng Tang <feng.tang@intel.com>
LKML-Reference: <alpine.LFD.2.00.0911181933540.24119@localhost.localdomain>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:23 -08:00
Amerigo Wang
1bbb1bc059 hfs: fix a potential buffer overflow
commit ec81aecb29668ad71f699f4e7b96ec46691895b6 upstream.

A specially-crafted Hierarchical File System (HFS) filesystem could cause
a buffer overflow to occur in a process's kernel stack during a memcpy()
call within the hfs_bnode_read() function (at fs/hfs/bnode.c:24).  The
attacker can provide the source buffer and length, and the destination
buffer is a local variable of a fixed length.  This local variable (passed
as "&entry" from fs/hfs/dir.c:112 and allocated on line 60) is stored in
the stack frame of hfs_bnode_read()'s caller, which is hfs_readdir().
Because the hfs_readdir() function executes upon any attempt to read a
directory on the filesystem, it gets called whenever a user attempts to
inspect any filesystem contents.

[amwang@redhat.com: modify this patch and fix coding style problems]
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Anderson <anderson@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:22 -08:00
Andi Kleen
7098a7420b futex: Take mmap_sem for get_user_pages in fault_in_user_writeable
commit 722d0172377a5697919b9f7e5beb95165b1dec4e upstream.

get_user_pages() must be called with mmap_sem held.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linuxfoundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091208121942.GA21298@basil.fritz.box>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:21 -08:00
Sukadev Bhattiprolu
1f5c6cef51 devpts_get_tty() should validate inode
commit edfacdd6f81119b9005615593f2cbd94b8c7e2d8 upstream.

devpts_get_tty() assumes that the inode passed in is associated with a valid
pty.  But if the only reference to the pty is via a bind-mount, the inode
passed to devpts_get_tty() while valid, would refer to a pty that no longer
exists.

With a lot of debug effort, Grzegorz Nosek developed a small program (see
below) to reproduce a crash on recent kernels. This crash is a regression
introduced by the commit:

	commit 527b3e4773
	Author: Sukadev Bhattiprolu <sukadev@us.ibm.com>
	Date:   Mon Oct 13 10:43:08 2008 +0100

To fix, ensure that the dentry associated with the inode has not yet been
deleted/unhashed by devpts_pty_kill().

See also:
https://lists.linux-foundation.org/pipermail/containers/2009-July/019273.html

tty-bug.c:

#define _GNU_SOURCE
#include <fcntl.h>
#include <sched.h>
#include <stdlib.h>
#include <sys/mount.h>
#include <sys/signal.h>
#include <unistd.h>
#include <stdio.h>

#include <linux/fs.h>

void dummy(int sig)
{
}

static int child(void *unused)
{
	int fd;

	signal(SIGINT, dummy); signal(SIGHUP, dummy);
	pause(); /* cheesy synchronisation to wait for /dev/pts/0 to appear */

	mount("/dev/pts/0", "/dev/console", NULL, MS_BIND, NULL);
	sleep(2);

	fd = open("/dev/console", O_RDWR);
	dup(0); dup(0);
	write(1, "Hello world!\n", sizeof("Hello world!\n")-1);
	return 0;
}

int main(void)
{
	pid_t pid;
	char *stack;

	stack = malloc(16384);
	pid = clone(child, stack+16384, CLONE_NEWNS|SIGCHLD, NULL);

	open("/dev/ptmx", O_RDWR|O_NOCTTY|O_NONBLOCK);

	unlockpt(fd); grantpt(fd);

	sleep(2);
	kill(pid, SIGHUP);
	sleep(1);
	return 0; /* exit before child opens /dev/console */
}

Reported-by: Grzegorz Nosek <root@localdomain.pl>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:21 -08:00
Mathieu Desnoyers
f4173b24e1 debugfs: fix create mutex racy fops and private data
commit d3a3b0adad0865c12e39b712ca89efbd0a3a0dbc upstream.

Setting fops and private data outside of the mutex at debugfs file
creation introduces a race where the files can be opened with the wrong
file operations and private data.  It is easy to trigger with a process
waiting on file creation notification.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:20 -08:00
Alexey Dobriyan
946b3840c9 bsdacct: fix uid/gid misreporting
commit 4b731d50ff3df6b9141a6c12b088e8eb0109e83c upstream.

commit d8e180dcd5bbbab9cd3ff2e779efcf70692ef541 "bsdacct: switch
credentials for writing to the accounting file" introduced credential
switching during final acct data collecting.  However, uid/gid pair
continued to be collected from current which became credentials of who
created acct file, not who exits.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14676

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Juho K. Juopperi <jkj@kapsi.fi>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:19 -08:00
Luis R. Rodriguez
0027ce4116 ath5k: enable EEPROM checksum check
commit 512414b0bed0d376ac4d5ec1dd6f0b1a3551febc upstream.

Without this we have no gaurantee of the integrity of the
EEPROM and are likely to encounter a lot of bogus bug reports
due to actual issues on the EEPROM. With the EEPROM checksum
check in place we can easily rule those issues out.

If you run patch during a revert *you* have a card with a busted
EEPROM and only older kernel will support that concoction. This
patch is a trade off between not accepitng bogus EEPROMs and
avoiding bogus bug reports allowing developers to focus instead
on real concrete issues.

If stable keeps bogus bug reports because of a possibly busted EEPROM
feel free to apply this there too.

Tested on an AR5414

Cc: jirislaby@gmail.com
Cc: akpm@linux-foundation.org
Cc: rjw@sisk.pl
Cc: me@bobcopeland.com
Cc: david.quan@atheros.com
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:18 -08:00
Bob Copeland
264eaee38a ath5k: allow setting txpower to 0
commit 2eb2fa67e5462a36e98172fb92c78bc405b3035f upstream.

As a holdover from earlier code when we used to set
the power limit to '0' after a reset to configure the
default transmit power, ath5k interprets txpower=0 as
12.5 dBm.  Fix that by just passing 0 through.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14567

Reported-by: Daniel Folkers <daniel.folkers@task24.nl>
Tested-by: Daniel Folkers <daniel.folkers@task24.nl>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:18 -08:00
Takashi Iwai
417cb778fa ALSA: hrtimer - Fix lock-up
commit fcfdebe70759c74e2e701f69aaa7f0e5e32cf5a6 upstream.

The timer stop callback can be called from snd_timer_interrupt(), which
is called from the hrtimer callback.  Since hrtimer_cancel() waits for
the callback completion, this eventually results in a lock-up.

This patch fixes the problem by just toggling a flag at stop callback
and call hrtimer_cancel() later.

Reported-and-tested-by: Wojtek Zabolotny <W.Zabolotny@elka.pw.edu.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:16 -08:00
Jaroslav Kysela
11df973c12 ALSA: hda - Terradici HDA controllers does not support 64-bit mode
commit 396087eaead95fcb29eb36f1e59517aeb58c545e upstream.

Confirmed from vendor and tests in RedHat bugzilla #536782 .

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:14 -08:00
Jay Fenlason
ed033bf1ff firewire: ohci: handle receive packets with a data length of zero
commit 8c0c0cc2d9f4c523fde04bdfe41e4380dec8ee54 upstream.

Queueing to receive an ISO packet with a payload length of zero
silently does nothing in dualbuffer mode, and crashes the kernel in
packet-per-buffer mode.  Return an error in dualbuffer mode, because
the DMA controller won't let us do what we want, and work correctly in
packet-per-buffer mode.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:12 -08:00
Alan Stern
9b6950a5e8 USB: usb-storage: fix bug in fill_inquiry
commit f3f6faa9edf67c1018270793e0547b0f81abb47e upstream.

This patch (as1312) fixes a minor bug in usb-storage.  The
fill_inquiry() routine neglects to pre-load the inquiry data buffer
with spaces.  As a result, if the vendor name is shorter than 8
characters or the product name is shorter than 16, the remainder will
be filled with garbage.

The patch also removes some unnecessary calls to strlen().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:12 -08:00
zhao.ming9@zte.com.cn
944c010bce USB: option: add pid for ZTE
commit 8d87cacda7c8db5c131bfcaaa1d90bfe918c2ebc upstream.

This patch adds ZTE modem devices.

Signed-off-by: Ming Zhao <zhao.ming9@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18 13:43:10 -08:00
Greg Kroah-Hartman
047e5f3835 Linux 2.6.31.8 2009-12-14 08:14:26 -08:00
Theodore Ts'o
26973f8bd6 ext4: Fix potential fiemap deadlock (mmap_sem vs. i_data_sem)
(cherry picked from commit fab3a549e204172236779f502eccb4f9bf0dc87d)

Fix the following potential circular locking dependency between
mm->mmap_sem and ei->i_data_sem:

    =======================================================
    [ INFO: possible circular locking dependency detected ]
    2.6.32-04115-gec044c5 #37
    -------------------------------------------------------
    ureadahead/1855 is trying to acquire lock:
     (&mm->mmap_sem){++++++}, at: [<ffffffff81107224>] might_fault+0x5c/0xac

    but task is already holding lock:
     (&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&ei->i_data_sem){++++..}:
           [<ffffffff81099bfa>] __lock_acquire+0xb67/0xd0f
           [<ffffffff81099e7e>] lock_acquire+0xdc/0x102
           [<ffffffff81516633>] down_read+0x51/0x84
           [<ffffffff811a2414>] ext4_get_blocks+0x50/0x2a5
           [<ffffffff811a3453>] ext4_get_block+0xab/0xef
           [<ffffffff81154f39>] do_mpage_readpage+0x198/0x48d
           [<ffffffff81155360>] mpage_readpages+0xd0/0x114
           [<ffffffff811a104b>] ext4_readpages+0x1d/0x1f
           [<ffffffff810f8644>] __do_page_cache_readahead+0x12f/0x1bc
           [<ffffffff810f86f2>] ra_submit+0x21/0x25
           [<ffffffff810f0cfd>] filemap_fault+0x19f/0x32c
           [<ffffffff81107b97>] __do_fault+0x55/0x3a2
           [<ffffffff81109db0>] handle_mm_fault+0x327/0x734
           [<ffffffff8151aaa9>] do_page_fault+0x292/0x2aa
           [<ffffffff81518205>] page_fault+0x25/0x30
           [<ffffffff812a34d8>] clear_user+0x38/0x3c
           [<ffffffff81167e16>] padzero+0x20/0x31
           [<ffffffff81168b47>] load_elf_binary+0x8bc/0x17ed
           [<ffffffff81130e95>] search_binary_handler+0xc2/0x259
           [<ffffffff81166d64>] load_script+0x1b8/0x1cc
           [<ffffffff81130e95>] search_binary_handler+0xc2/0x259
           [<ffffffff8113255f>] do_execve+0x1ce/0x2cf
           [<ffffffff81027494>] sys_execve+0x43/0x5a
           [<ffffffff8102918a>] stub_execve+0x6a/0xc0

    -> #0 (&mm->mmap_sem){++++++}:
           [<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f
           [<ffffffff81099e7e>] lock_acquire+0xdc/0x102
           [<ffffffff81107251>] might_fault+0x89/0xac
           [<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda
           [<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157
           [<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1
           [<ffffffff811be21e>] ext4_fiemap+0x13c/0x159
           [<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6
           [<ffffffff811392ca>] sys_ioctl+0x56/0x79
           [<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b

    other info that might help us debug this:

    1 lock held by ureadahead/1855:
     #0:  (&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159

    stack backtrace:
    Pid: 1855, comm: ureadahead Not tainted 2.6.32-04115-gec044c5 #37
    Call Trace:
     [<ffffffff81098c70>] print_circular_bug+0xa8/0xb7
     [<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f
     [<ffffffff8102f229>] ? sched_clock+0x9/0xd
     [<ffffffff81099e7e>] lock_acquire+0xdc/0x102
     [<ffffffff81107224>] ? might_fault+0x5c/0xac
     [<ffffffff81107251>] might_fault+0x89/0xac
     [<ffffffff81107224>] ? might_fault+0x5c/0xac
     [<ffffffff81124b44>] ? __kmalloc+0x13b/0x18c
     [<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda
     [<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157
     [<ffffffff811bca0b>] ? ext4_ext_fiemap_cb+0x0/0x157
     [<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1
     [<ffffffff811be21e>] ext4_fiemap+0x13c/0x159
     [<ffffffff81107224>] ? might_fault+0x5c/0xac
     [<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6
     [<ffffffff8129f6d0>] ? __up_read+0x8d/0x95
     [<ffffffff81517fb5>] ? retint_swapgs+0x13/0x1b
     [<ffffffff811392ca>] sys_ioctl+0x56/0x79
     [<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:08:12 -08:00
Sebastian Andrzej Siewior
59cebab12f signal: Fix alternate signal stack check
commit 2a855dd01bc1539111adb7233f587c5c468732ac upstream.

All architectures in the kernel increment/decrement the stack pointer
before storing values on the stack.

On architectures which have the stack grow down sas_ss_sp == sp is not
on the alternate signal stack while sas_ss_sp + sas_ss_size == sp is
on the alternate signal stack.

On architectures which have the stack grow up sas_ss_sp == sp is on
the alternate signal stack while sas_ss_sp + sas_ss_size == sp is not
on the alternate signal stack.

The current implementation fails for architectures which have the
stack grow down on the corner case where sas_ss_sp == sp.This was
reported as Debian bug #544905 on AMD64.
Simplified test case: http://download.breakpoint.cc/tc-sig-stack.c

The test case creates the following stack scenario:
   0xn0300	stack top
   0xn0200	alt stack pointer top (when switching to alt stack)
   0xn01ff	alt stack end
   0xn0100	alt stack start == stack pointer

If the signal is sent the stack pointer is pointing to the base
address of the alt stack and the kernel erroneously decides that it
has already switched to the alternate stack because of the current
check for "sp - sas_ss_sp < sas_ss_size"

On parisc (stack grows up) the scenario would be:
   0xn0200	stack pointer
   0xn01ff	alt stack end
   0xn0100	alt stack start = alt stack pointer base
   		    	  	  (when switching to alt stack)
   0xn0000	stack base

This is handled correctly by the current implementation.

[ tglx: Modified for archs which have the stack grow up (parisc) which
  	would fail with the correct implementation for stack grows
  	down. Added a check for sp >= current->sas_ss_sp which is
  	strictly not necessary but makes the code symetric for both
  	variants ]

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
LKML-Reference: <20091025143758.GA6653@Chamillionaire.breakpoint.cc>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:08:11 -08:00
James Bottomley
3c4f4e86d3 SCSI: scsi_lib_dma: fix bug with dma maps on nested scsi objects
commit d139b9bd0e52dda14fd13412e7096e68b56d0076 upstream.

Some of our virtual SCSI hosts don't have a proper bus parent at the
top, which can be a problem for doing DMA on them

This patch makes the host device cache a pointer to the physical bus
device and provides an extra API for setting it (the normal API picks
it up from the parent).  This patch also modifies the qla2xxx and lpfc
vport logic to use the new DMA host setting API.

Acked-By: James Smart  <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:08:09 -08:00
Martin Michlmayr
fa0b908298 SCSI: osd_protocol.h: Add missing #include
commit 0899638688f223fd9e9fee60d662665e11693d12 upstream.

include/scsi/osd_protocol.h uses ALIGN() without an #include
<linux/kernel.h>, leading to:
| include/scsi/osd_protocol.h:362: error: implicit declaration of function 'ALIGN'

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:08:07 -08:00
Yang, Bo
66d8e059a5 SCSI: megaraid_sas: fix 64 bit sense pointer truncation
commit 7b2519afa1abd1b9f63aa1e90879307842422dae upstream.

The current sense pointer is cast to a u32 pointer, which can truncate
on 64 bits.  Fix by using unsigned long instead.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:08:04 -08:00
Akira Fujita
51a88ff8de ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT
(cherry picked from commit 4a58579b9e4e2a35d57e6c9c8483e52f6f1b7fd6)

This patch fixes three problems in the handling of the
EXT4_IOC_MOVE_EXT ioctl:

1. In current EXT4_IOC_MOVE_EXT, there are read access mode checks for
original and donor files, but they allow the illegal write access to
donor file, since donor file is overwritten by original file data.  To
fix this problem, change access mode checks of original (r->r/w) and
donor (r->w) files.

2.  Disallow the use of donor files that have a setuid or setgid bits.

3.  Call mnt_want_write() and mnt_drop_write() before and after
ext4_move_extents() calling to get write access to a mount.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:08:01 -08:00
Jan Kara
e8f0d50745 ext4: Wait for proper transaction commit on fsync
(cherry picked from commit b436b9bef84de6893e86346d8fbf7104bc520645)

We cannot rely on buffer dirty bits during fsync because pdflush can come
before fsync is called and clear dirty bits without forcing a transaction
commit. What we do is that we track which transaction has last changed
the inode and which transaction last changed allocation and force it to
disk on fsync.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:08:00 -08:00
Dmitry Monakhov
224fb95294 ext4: fix incorrect block reservation on quota transfer.
(cherry picked from commit 194074acacebc169ded90a4657193f5180015051)

Inside ->setattr() call both ATTR_UID and ATTR_GID may be valid
This means that we may end-up with transferring all quotas. Add
we have to reserve QUOTA_DEL_BLOCKS for all quotas, as we do in
case of QUOTA_INIT_BLOCKS.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:58 -08:00
Dmitry Monakhov
e79220b944 ext4: quota macros cleanup
(cherry picked from commit 5aca07eb7d8f14d90c740834d15ca15277f4820c)

Currently all quota block reservation macros contains hard-coded "2"
aka MAXQUOTAS value. This is no good because in some places it is not
obvious to understand what does this digit represent. Let's introduce
new macro with self descriptive name.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:57 -08:00
Dmitry Monakhov
89ca4c75b2 ext4: ext4_get_reserved_space() must return bytes instead of blocks
(cherry picked from commit 8aa6790f876e81f5a2211fe1711a5fe3fe2d7b20)

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:56 -08:00
Curt Wohlgemuth
a9a3ddb71f ext4: remove blocks from inode prealloc list on failure
(cherry picked from commit b844167edc7fcafda9623955c05e4c1b3c32ebc7)

This fixes a leak of blocks in an inode prealloc list if device failures
cause ext4_mb_mark_diskspace_used() to fail.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:54 -08:00
Josef Bacik
3b9d4e773c ext4: wait for log to commit when umounting
(cherry picked from commit d4edac314e9ad0b21ba20ba8bc61b61f186f79e1)

There is a potential race when a transaction is committing right when
the file system is being umounting.  This could reduce in a race
because EXT4_SB(sb)->s_group_info could be freed in ext4_put_super
before the commit code calls a callback so the mballoc code can
release freed blocks in the transaction, resulting in a panic trying
to access the freed s_group_info.

The fix is to wait for the transaction to finish committing before we
shutdown the multiblock allocator.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:52 -08:00
Jan Kara
1065591da0 ext4: Avoid data / filesystem corruption when write fails to copy data
(cherry picked from commit b9a4207d5e911b938f73079a83cc2ae10524ec7f)

When ext4_write_begin fails after allocating some blocks or
generic_perform_write fails to copy data to write, we truncate blocks
already instantiated beyond i_size.  Although these blocks were never
inside i_size, we have to truncate the pagecache of these blocks so
that corresponding buffers get unmapped.  Otherwise subsequent
__block_prepare_write (called because we are retrying the write) will
find the buffers mapped, not call ->get_block, and thus the page will
be backed by already freed blocks leading to filesystem and data
corruption.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:51 -08:00
Roel Kluin
5e5c63120a ext4: Return the PTR_ERR of the correct pointer in setup_new_group_blocks()
(cherry picked from commit c09eef305dd43846360944ad072f051f964fa383)

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:51 -08:00
Theodore Ts'o
aea93db412 jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()
(cherry picked from commit e6ec116b67f46e0e7808276476554727b2e6240b)

OOM happens.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:49 -08:00
Akira Fujita
eee4dabf62 ext4: move_extent_per_page() cleanup
(cherry picked from commit ac48b0a1d068887141581bea8285de5fcab182b0)

Integrate duplicate lines (acquire/release semaphore and invalidate
extent cache in move_extent_per_page()) into mext_replace_branches(),
to reduce source and object code size.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:48 -08:00
Kazuya Mio
3f54503c2b ext4: initialize moved_len before calling ext4_move_extents()
(cherry picked from commit 446aaa6e7e993b38a6f21c6acfa68f3f1af3dbe3)

The move_extent.moved_len is used to pass back the number of exchanged
blocks count to user space.  Currently the caller must clear this
field; but we spend more code space checking for this requirement than
simply zeroing the field ourselves, so let's just make life easier for
everyone all around.

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:47 -08:00
Akira Fujita
b989415643 ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT
(cherry picked from commit 94d7c16cbbbd0e03841fcf272bcaf0620ad39618)

At the beginning of ext4_move_extent(), we call
ext4_discard_preallocations() to discard inode PAs of orig and donor
inodes.  But in the following case, blocks can be double freed, so
move ext4_discard_preallocations() to the end of ext4_move_extents().

1. Discard inode PAs of orig and donor inodes with
   ext4_discard_preallocations() in ext4_move_extents().

   orig : [ DATA1 ]
   donor: [ DATA2 ]

2. While data blocks are exchanging between orig and donor inodes, new
   inode PAs is created to orig by other process's block allocation.
   (Since there are semaphore gaps in ext4_move_extents().)  And new
   inode PAs is used partially (2-1).

   2-1 Create new inode PAs to orig inode
   orig : [ DATA1 | used PA1 | free PA1 ]
   donor: [ DATA2 ]

3. Donor inode which has old orig inode's blocks is deleted after
   EXT4_IOC_MOVE_EXT finished (3-1, 3-2).  So the block bitmap
   corresponds to old orig inode's blocks are freed.

   3-1 After EXT4_IOC_MOVE_EXT finished
   orig : [ DATA2 |  free PA1 ]
   donor: [ DATA1 |  used PA1 ]

   3-2 Delete donor inode
   orig : [ DATA2 |  free PA1 ]
   donor: [ FREE SPACE(DATA1) | FREE SPACE(used PA1) ]

4. The double-free of blocks is occurred, when close() is called to
   orig inode.  Because ext4_discard_preallocations() for orig inode
   frees used PA1 and free PA1, though used PA1 is already freed in 3.

   4-1 Double-free of blocks is occurred
   orig : [ DATA2 |  FREE SPACE(free PA1) ]
   donor: [ FREE SPACE(DATA1) | DOUBLE FREE(used PA1) ]

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:46 -08:00
Eric Sandeen
360bfe0d07 ext4: make "norecovery" an alias for "noload"
(cherry picked from commit e3bb52ae2bb9573e84c17b8e3560378d13a5c798)

Users on the linux-ext4 list recently complained about differences
across filesystems w.r.t. how to mount without a journal replay.

In the discussion it was noted that xfs's "norecovery" option is
perhaps more descriptively accurate than "noload," so let's make
that an alias for ext4.

Also show this status in /proc/mounts

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:44 -08:00
Eric Sandeen
c46e04b9e7 ext4: make trim/discard optional (and off by default)
(cherry picked from commit 5328e635315734d42080de9a5a1ee87bf4cae0a4)

It is anticipated that when sb_issue_discard starts doing
real work on trim-capable devices, we may see issues.  Make
this mount-time optional, and default it to off until we know
that things are working out OK.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:42 -08:00
Jan Kara
648d9cddf4 ext4: fix error handling in ext4_ind_get_blocks()
(cherry picked from commit 2bba702d4f88d7b010ec37e2527b552588404ae7)

When an error happened in ext4_splice_branch we failed to notice that
in ext4_ind_get_blocks and mapped the buffer anyway. Fix the problem
by checking for error properly.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:41 -08:00
Theodore Ts'o
84d77b74f7 ext4: avoid issuing unnecessary barriers
(cherry picked from commit 6b17d902fdd241adfa4ce780df20547b28bf5801)

We don't to issue an I/O barrier on an error or if we force commit
because we are doing data journaling.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:39 -08:00
Theodore Ts'o
b284e381f7 ext4: fix block validity checks so they work correctly with meta_bg
(cherry picked from commit 1032988c71f3f85483b2b4319684d1205a704c02)

The block validity checks used by ext4_data_block_valid() wasn't
correctly written to check file systems with the meta_bg feature.  Fix
this.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:37 -08:00
Theodore Ts'o
433a171d4c ext4: fix uninit block bitmap initialization when s_meta_first_bg is non-zero
(cherry picked from commit 8dadb198cb70ef811916668fe67eeec82e8858dd)

The number of old-style block group descriptor blocks is
s_meta_first_bg when the meta_bg feature flag is set.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:36 -08:00
Theodore Ts'o
a0dacfcfac ext4: don't update the superblock in ext4_statfs()
(cherry picked from commit 3f8fb9490efbd300887470a2a880a64e04dcc3f5)

commit a71ce8c6c9 updated ext4_statfs()
to update the on-disk superblock counters, but modified this buffer
directly without any journaling of the change.  This is one of the
accesses that was causing the crc errors in journal replay as seen in
kernel.org bugzilla #14354.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:34 -08:00
Eric Sandeen
c1e25a5675 ext4: journal all modifications in ext4_xattr_set_handle
(cherry picked from commit 86ebfd08a1930ccedb8eac0aeb1ed4b8b6a41dbc)

ext4_xattr_set_handle() was zeroing out an inode outside
of journaling constraints; this is one of the accesses that
was causing the crc errors in journal replay as seen in
kernel.org bugzilla #14354.

Reviewed-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:33 -08:00
Julia Lawall
882e3a7d67 ext4: fix i_flags access in ext4_da_writepages_trans_blocks()
(cherry picked from commit 30c6e07a92ea4cb87160d32ffa9bce172576ae4c)

We need to be testing the i_flags field in the ext4 specific portion
of the inode, instead of the (confusingly aliased) i_flags field in
the generic struct inode.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:29 -08:00
Theodore Ts'o
063875158f ext4: make sure directory and symlink blocks are revoked
(cherry picked from commit 50689696867d95b38d9c7be640a311494a04fb86)

When an inode gets unlinked, the functions ext4_clear_blocks() and
ext4_remove_blocks() call ext4_forget() for all the buffer heads
corresponding to the deleted inode's data blocks.  If the inode is a
directory or a symlink, the is_metadata parameter must be non-zero so
ext4_forget() will revoke them via jbd2_journal_revoke().  Otherwise,
if these blocks are reused for a data file, and the system crashes
before a journal checkpoint, the journal replay could end up
corrupting these data blocks.

Thanks to Curt Wohlgemuth for pointing out potential problems in this
area.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:28 -08:00
Theodore Ts'o
97a9a2516a ext4: plug a buffer_head leak in an error path of ext4_iget()
(cherry picked from commit 567f3e9a70d71e5c9be03701b8578be77857293b)

One of the invalid error paths in ext4_iget() forgot to brelse() the
inode buffer head.  Fix it by adding a brelse() in the common error
return path, which also simplifies function.

Thanks to Andi Kleen <ak@linux.intel.com> reporting the problem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:27 -08:00
Akira Fujita
1cb0b89456 ext4: fix possible recursive locking warning in EXT4_IOC_MOVE_EXT
(cherry picked from commit 49bd22bc4d603a2a4fc2a6a60e156cbea52eb494)

If CONFIG_PROVE_LOCKING is enabled, the double_down_write_data_sem()
will trigger a false-positive warning of a recursive lock.  Since we
take i_data_sem for the two inodes ordered by their inode numbers,
this isn't a problem.  Use of down_write_nested() will notify the lock
dependency checker machinery that there is no problem here.

This problem was reported by Brian Rogers:

	http://marc.info/?l=linux-ext4&m=125115356928011&w=1

Reported-by: Brian Rogers <brian@xyzw.org>
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:26 -08:00
Akira Fujita
c6b24d6fd8 ext4: fix lock order problem in ext4_move_extents()
(cherry picked from commit fc04cb49a898c372a22b21fffc47f299d8710801)

ext4_move_extents() checks the logical block contiguousness
of original file with ext4_find_extent() and mext_next_extent().
Therefore the extent which ext4_ext_path structure indicates
must not be changed between above functions.

But in current implementation, there is no i_data_sem protection
between ext4_ext_find_extent() and mext_next_extent().  So the extent
which ext4_ext_path structure indicates may be overwritten by
delalloc.  As a result, ext4_move_extents() will exchange wrong blocks
between original and donor files.  I change the place where
acquire/release i_data_sem to solve this problem.

Moreover, I changed move_extent_per_page() to start transaction first,
and then acquire i_data_sem.  Without this change, there is a
possibility of the deadlock between mmap() and ext4_move_extents():

* NOTE: "A", "B" and "C" mean different processes

A-1: ext4_ext_move_extents() acquires i_data_sem of two inodes.

B:   do_page_fault() starts the transaction (T),
     and then tries to acquire i_data_sem.
     But process "A" is already holding it, so it is kept waiting.

C:   While "A" and "B" running, kjournald2 tries to commit transaction (T)
     but it is under updating, so kjournald2 waits for it.

A-2: Call ext4_journal_start with holding i_data_sem,
     but transaction (T) is locked.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:25 -08:00
Akira Fujita
9a88a5ad2a ext4: fix the returned block count if EXT4_IOC_MOVE_EXT fails
(cherry picked from commit f868a48d06f8886cb0367568a12367fa4f21ea0d)

If the EXT4_IOC_MOVE_EXT ioctl fails, the number of blocks that were
exchanged before the failure should be returned to the userspace
caller.  Unfortunately, currently if the block size is not the same as
the page size, the returned block count that is returned is the
page-aligned block count instead of the actual block count.  This
commit addresses this bug.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 08:07:24 -08:00