Files
qemu/python/Makefile
John Snow bc5d8b4bc0 python: upgrade to Python3.12+
With Python3.9 EOL and Python3.10 soon to be EOL (October 2026), and
with ... no other supported build platform actually using Python 3.11,
require the use of Python3.12 or later.

Additionally, as part of this upgrade, remove the use of tomllib from
mkvenv as it is now standard in the Python stdlib: leaving this
transitional code in causes a regression with mypy which becomes
confused about the overloaded use of 'tomllib'.

Our current minimum requirements as determined by standard repository
packages on supported distributions is as follows:

distro            EOS         python3  pip     setuptools  sphinx  wheel
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-------------------------------------------------------------------------
centos_stream_9   2026-12-12  3.9.25   21.3.1  53.0.0      3.4.3   0.36.2
centos_stream_9+  2026-12-12  3.12.13  23.2.1  68.2.2      ---     0.41.2
freebsd           --          3.12.14  23.3.2  63.1.0      9.0.4   0.48.0
ubuntu_24_04      2028-04-23  3.12.3   24.0    68.1.2      7.2.6   0.42.0
centos_stream_10  2030-01-01  3.12.13  23.3.2  69.0.3      7.2.6   0.41.2
alpine_3_21       2026-11-01  3.12.14  24.3.1  70.3.0      8.1.3   0.43.0
debian_13         2028-08-09  3.13.5   25.1.1  78.1.1      8.1.3   0.46.1
fedora_43         2026-12-09  3.14.7   25.1.1  78.1.1      8.2.3   0.45.1
ubuntu_26_04      2031-05-29  3.14.4   25.1.1  78.1.1      8.2.3   0.46.3
fedora_44         2027-06-02  3.14.7   26.0.1  80.10.2     8.2.3   0.45.1
macports          --          3.14.7   26.0.1  80.10.2     9.1.0   0.48.0
alpine_3_22       2027-05-01  3.12.14  25.1.1  80.9.0      8.2.3   0.46.3
alpine_3_23       2027-11-01  3.12.14  25.1.1  80.9.0      8.2.3   0.46.3
openbsd           --          3.14.6   26.2.1  80.9.0      9.1.0   0.48.0
alpine_3_24       2028-06-01  3.14.7   26.1.2  82.0.1      9.1.0   0.47.0
pkgsrc_current    --          3.13.15  26.2.1  84.0.0      9.1.0   0.48.0

CentOS stream 9 note: python3.12, python3.12-pip,
python3.12-setuptools and python3.12-wheel are available as optional
packages in the standard repository. Sphinx is not available, but can
be side-loaded from PyPI using pip3.12.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20260825215851.1780608-10-jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
2026-09-02 15:02:58 -04:00

132 lines
3.8 KiB
Makefile

QEMU_VENV_DIR=.dev-venv
QEMU_MINVENV_DIR=.min-venv
QEMU_TOX_EXTRA_ARGS ?=
.PHONY: help
help:
@echo "python packaging help:"
@echo ""
@echo "make check-minreqs:"
@echo " Run tests in the minreqs virtual environment."
@echo " These tests use the oldest dependencies."
@echo " Requires: Python 3.12"
@echo " Hint (Fedora): 'sudo dnf install python3.12'"
@echo ""
@echo "make check-tox:"
@echo " Run tests against multiple python versions."
@echo " These tests use the newest dependencies."
@echo " Requires: Python 3.12 - 3.14, and tox."
@echo " Hint (Fedora): 'sudo dnf install python3-tox python3.14'"
@echo " The variable QEMU_TOX_EXTRA_ARGS can be use to pass extra"
@echo " arguments to tox".
@echo ""
@echo "make check-dev:"
@echo " Run tests in a venv against your default python3 version."
@echo " These tests use the newest dependencies."
@echo " Requires: Python 3.x"
@echo ""
@echo "make check:"
@echo " Run tests in your *current environment*."
@echo " Performs no environment setup of any kind."
@echo ""
@echo "make develop:"
@echo " Install deps needed for 'make check',"
@echo " and install the qemu package in editable mode."
@echo " (Can be used in or outside of a venv.)"
@echo ""
@echo "make min-venv"
@echo " Creates the minreqs virtual environment ($(QEMU_MINVENV_DIR))"
@echo ""
@echo "make dev-venv"
@echo " Creates a simple venv for check-dev. ($(QEMU_VENV_DIR))"
@echo ""
@echo "make clean:"
@echo " Remove package build output."
@echo ""
@echo "make distclean:"
@echo " remove venv files, qemu package forwarder,"
@echo " built distribution files, and everything from 'make clean'."
@echo ""
@echo -e "Have a nice day ^_^\n"
.PHONY: pipenv check-pipenv
pipenv check-pipenv:
@echo "pipenv was dropped; try 'make check-minreqs' or 'make min-venv'"
@exit 1
PIP_INSTALL = pip install --disable-pip-version-check
.PHONY: min-venv
min-venv: $(QEMU_MINVENV_DIR) $(QEMU_MINVENV_DIR)/bin/activate
$(QEMU_MINVENV_DIR) $(QEMU_MINVENV_DIR)/bin/activate: setup.cfg tests/minreqs.txt
@echo "VENV $(QEMU_MINVENV_DIR)"
@python3.12 -m venv $(QEMU_MINVENV_DIR)
@( \
echo "ACTIVATE $(QEMU_MINVENV_DIR)"; \
. $(QEMU_MINVENV_DIR)/bin/activate; \
echo "INSTALL -r tests/minreqs.txt $(QEMU_MINVENV_DIR)";\
$(PIP_INSTALL) -r tests/minreqs.txt 1>/dev/null; \
echo "INSTALL -e qemu $(QEMU_MINVENV_DIR)"; \
PIP_CONFIG_SETTINGS="editable_mode=compat" $(PIP_INSTALL) -e . 1>/dev/null; \
)
@touch $(QEMU_MINVENV_DIR)
.PHONY: check-minreqs
check-minreqs: min-venv
@( \
echo "ACTIVATE $(QEMU_MINVENV_DIR)"; \
. $(QEMU_MINVENV_DIR)/bin/activate; \
make check; \
)
.PHONY: dev-venv
dev-venv: $(QEMU_VENV_DIR) $(QEMU_VENV_DIR)/bin/activate
$(QEMU_VENV_DIR) $(QEMU_VENV_DIR)/bin/activate: setup.cfg
@echo "VENV $(QEMU_VENV_DIR)"
@python3 -m venv $(QEMU_VENV_DIR)
@( \
echo "ACTIVATE $(QEMU_VENV_DIR)"; \
. $(QEMU_VENV_DIR)/bin/activate; \
echo "INSTALL qemu[devel] $(QEMU_VENV_DIR)"; \
make develop 1>/dev/null; \
)
@touch $(QEMU_VENV_DIR)
.PHONY: check-dev
check-dev: dev-venv
@( \
echo "ACTIVATE $(QEMU_VENV_DIR)"; \
. $(QEMU_VENV_DIR)/bin/activate; \
make check; \
)
.PHONY: develop
develop:
PIP_CONFIG_SETTINGS="editable_mode=compat" $(PIP_INSTALL) -e .[devel]
.PHONY: check
check:
@pytest -v tests/*.py
.PHONY: check-tox
check-tox:
@tox $(QEMU_TOX_EXTRA_ARGS)
.PHONY: check-coverage
check-coverage:
@coverage run -m pytest -v tests/*.py
@coverage combine
@coverage html
@coverage report
.PHONY: clean
clean:
python3 setup.py clean --all
rm -f pyproject.toml
.PHONY: distclean
distclean: clean
rm -rf qemu.egg-info/ .eggs/ dist/
rm -rf $(QEMU_VENV_DIR) $(QEMU_MINVENV_DIR) .tox/
rm -f .coverage .coverage.*
rm -rf htmlcov/