fix the tests too

This will enable the quirky resize behavior for applications that are prepared
  for it. The "quirky resize" is "don't `InvalidateAll` when the terminal
  resizes". This is added as a quirk as to not regress other terminal
  applications that aren't prepared for this behavior (gnome-terminal, conhost
  in particular). For those kinds of terminals, when the buffer is resized, it's
  just going to lose lines. That's what currently happens for them.

  When the quirk is enabled, conpty won't repaint the entire buffer. This gets
  around the "duplicated lines" issue that requesting multiple resizes in a row
  can cause. However, for these terminals that are unprepared, the conpty cursor
  might end up in the wrong position after a quirky resize.

  The case in point is maximizing the terminal. For maximizing (height->50) from
  a buffer that's 30 lines tall, with the cursor on y=30, this is what happens:
  * With the quirk disabled, conpty reprints the entire buffer. This is 60 lines
    that get printed. This ends up blowing away about 20 lines of scrollback
    history, as the terminal app would have tried to keep the text pinned to the
    bottom of the window. The term. app moved the viewport up 20 lines, and then
    the 50 lines of conpty output (30 lines of text, and 20 blank lines at the
    bottom) overwrote the lines from the scrollback. This is bad, but not
    immediately obvious, and is **what currently happens**.
  * With the quirk enabled, conpty doesn't emit any lines, but the actual
    content of the window is still only in the top 30 lines. However, the
    terminal app has still moved 20 lines down from the scrollback back into the
    viewport. So the terminal's cursor is at y=50 now, but conpty's is at 30.
    This means that the terminal and conpty are out of sync, and there's not a
    good way of re-syncing these. It's very possible (trivial in `powershell`)
    that the new output will jump up to y=30 override the existing output in the
    terminal buffer.

  the Windows Terminal is already prepared for this quirky behavior, so it
  doesn't keep the output at the bottom of the window. It shifts it's viewport
  down to match what conpty things the buffer looks like.

  What happens when we have passthroguh mode and WT is like "I would like quirky
  resize"? I guess things will just work fine, cause there won't be a buffer
  behind the passthrough app that the terminal cares about. Sure, in the
  passthrough case the Terminal could _not_ quirky resize, but the quirky resize
  won't be wrong.

.clang-format

@@ -1,25 +1,53 @@
----
-Language: Cpp
-BasedOnStyle: Microsoft
+
 AccessModifierOffset: -4
+AlignAfterOpenBracket: Align
+#AllowAllArgumentsOnNextLine: false
+AlignConsecutiveAssignments: false
+AlignConsecutiveDeclarations: false
+#AllowAllConstructorInitializersOnNextLine: false
 AlignEscapedNewlines: Left
+AlignOperands: true
 AlignTrailingComments: false
 AllowAllParametersOfDeclarationOnNextLine: false
-AllowShortFunctionsOnASingleLine: All
+AllowShortFunctionsOnASingleLine: Inline
+AllowShortCaseLabelsOnASingleLine: false
+AllowShortIfStatementsOnASingleLine: false
+#AllowShortLambdasOnASingleLine: Inline
+AllowShortLoopsOnASingleLine: false
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: false
 AlwaysBreakTemplateDeclarations: Yes
 BinPackArguments: false
 BinPackParameters: false
 BraceWrapping:
-  AfterCaseLabel: true
+  AfterClass: true
+  AfterControlStatement: true
+  AfterEnum: true
+  AfterFunction: true
+  AfterNamespace: true
+  AfterObjCDeclaration: true
+  AfterStruct: true
   AfterUnion: true
   AfterExternBlock: false
+  BeforeCatch: true
+  BeforeElse: true
+  IndentBraces: false
+  SplitEmptyFunction: true
+  SplitEmptyRecord: true
+  SplitEmptyNamespace: true
+BreakBeforeBinaryOperators: None
+BreakBeforeBraces: Custom
 BreakBeforeTernaryOperators: false
 BreakConstructorInitializers: AfterColon
 BreakInheritanceList: AfterColon
 ColumnLimit: 0
 CommentPragmas: "suppress"
+CompactNamespaces: false
 ConstructorInitializerAllOnOneLineOrOnePerLine: true
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
 Cpp11BracedListStyle: false
+DerivePointerAlignment: false
 FixNamespaceComments: false
 IncludeBlocks: Regroup
 IncludeCategories:
@@ -31,13 +59,35 @@ IncludeCategories:
       Priority: 2
     - Regex: '.*'
       Priority: 3
+IndentCaseLabels: false
+IndentPPDirectives: None
+IndentWidth: 4
+IndentWrappedFunctionNames: false
 KeepEmptyLinesAtTheStartOfBlocks: false
 MacroBlockBegin: "BEGIN_TEST_METHOD_PROPERTIES|BEGIN_MODULE|BEGIN_TEST_CLASS|BEGIN_TEST_METHOD"
 MacroBlockEnd: "END_TEST_METHOD_PROPERTIES|END_MODULE|END_TEST_CLASS|END_TEST_METHOD"
+MaxEmptyLinesToKeep: 1
 NamespaceIndentation: All
 PointerAlignment: Left
 ReflowComments: false
 SortIncludes: false
+SortUsingDeclarations: true
+SpaceAfterCStyleCast: false
+#SpaceAfterLogicalNot: false
 SpaceAfterTemplateKeyword: false
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeCpp11BracedList: false
+SpaceBeforeCtorInitializerColon: true
+SpaceBeforeInheritanceColon: true
+SpaceBeforeParens: ControlStatements
+SpaceBeforeRangeBasedForLoopColon: true
+SpaceInEmptyParentheses: false
+SpacesBeforeTrailingComments: 1
 SpacesInAngles: false
+SpacesInCStyleCastParentheses: false
 SpacesInContainerLiterals: false
+SpacesInParentheses: false
+SpacesInSquareBrackets: false
+Standard: Cpp11
+TabWidth: 4
+UseTab: Never

.config/dotnet-tools.json

@@ -1,12 +0,0 @@
-{
-  "version": 1,
-  "isRoot": true,
-  "tools": {
-    "XamlStyler.Console": {
-      "version": "3.2311.2",
-      "commands": [
-        "xstyler"
-      ]
-    }
-  }
-}

.editorconfig

@@ -1,7 +1,6 @@
 root = true
 
 [*]
-charset = utf-8
 trim_trailing_whitespace = true
 insert_final_newline = true
 

.git-blame-ignore-revs

@@ -1,15 +0,0 @@
-# Commits mentioned in this file will automatically
-# be skipped by GitHub's blame view.
-# To use it with "git", run
-# > git blame --ignore-revs-file ./.git-blame-ignore-revs
-
-# Reformatted the entire codebase
-9b92986b49bed8cc41fde4d6ef080921c41e6d9e
-
-# Line Endings changes
-cb7a76d96c92aa9fc7b03f69148fb0c75dff191d
-5bbf61af8c8f12e6c05d07a696bf7d411b330a67
-d07546a6fef73fa4e1fb1c2f01535843d1fcc212
-
-# UTF-8 BOM changes
-ddae2a1d49d604487d3c963e5eacbeb73861d986

.gitattributes

@@ -3,8 +3,6 @@
 ###############################################################################
 * -text
 
-*.inc linguist-language=cpp
-
 ###############################################################################
 # Set default behavior for command prompt diff.
 #

.github/ISSUE_TEMPLATE/Bug_Report.md

@@ -0,0 +1,54 @@
+---
+name: "Bug report 🐛"
+about: Report errors or unexpected behavior
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+<!-- 
+🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨
+
+I ACKNOWLEDGE THE FOLLOWING BEFORE PROCEEDING:
+1. If I delete this entire template and go my own path, the core team may close my issue without further explanation or engagement.
+2. If I list multiple bugs/concerns in this one issue, the core team may close my issue without further explanation or engagement.
+3. If I write an issue that has many duplicates, the core team may close my issue without further explanation or engagement (and without necessarily spending time to find the exact duplicate ID number).
+4. If I leave the title incomplete when filing the issue, the core team may close my issue without further explanation or engagement.
+5. If I file something completely blank in the body, the core team may close my issue without further explanation or engagement.
+
+All good? Then proceed!
+-->
+
+<!--
+This bug tracker is monitored by Windows Terminal development team and other technical folks.
+
+**Important: When reporting BSODs or security issues, DO NOT attach memory dumps, logs, or traces to Github issues**.
+Instead, send dumps/traces to secure@microsoft.com, referencing this GitHub issue.
+
+If this is an application crash, please also provide a Feedback Hub submission link so we can find your diagnostic data on the backend. Use the category "Apps > Windows Terminal (Preview)" and choose "Share My Feedback" after submission to get the link.
+
+Please use this form and describe your issue, concisely but precisely, with as much detail as possible.
+
+-->
+
+# Environment
+
+```none
+Windows build number: [run `[Environment]::OSVersion` for powershell, or `ver` for cmd]
+Windows Terminal version (if applicable):
+
+Any other software?
+```
+
+# Steps to reproduce
+
+<!-- A description of how to trigger this bug. -->
+
+# Expected behavior
+
+<!-- A description of what you're expecting, possibly containing screenshots or reference material. -->
+
+# Actual behavior
+
+<!-- What's actually happening? -->

.github/ISSUE_TEMPLATE/Bug_Report.yml

@@ -1,61 +0,0 @@
-name: "Bug report 🐛"
-description: Report errors or unexpected behavior
-labels: [Issue-Bug, Needs-Triage]
-body:
-- type: markdown
-  attributes:
-    value: |
-      Please make sure to [search for existing issues](https://github.com/microsoft/terminal/issues) and [check the FAQ](https://github.com/microsoft/terminal/wiki/Frequently-Asked-Questions-(FAQ)) before filing a new one!
-
-      If this is an application crash, please also provide a [Feedback Hub](https://aka.ms/terminal-feedback-hub) submission link so we can find your diagnostic data on the backend. Use the category "Apps > Windows Terminal" and choose "Share My Feedback" after submission to get the link.
-
-- type: input
-  attributes:
-    label: Windows Terminal version
-    placeholder: "1.7.3651.0"
-    description: |
-      You can copy the version number from the About dialog. Open the About dialog by opening the menu with the "V" button (to the right of the "+" button that opens a new tab) and choosing About from the end of the list.
-  validations:
-    required: false
-    
-- type: input
-  attributes:
-    label: Windows build number
-    placeholder: "10.0.19042.0"
-    description: |
-      Please run `ver` or `[Environment]::OSVersion`.
-  validations:
-    required: false
-
-- type: textarea
-  attributes:
-    label: Other Software
-    description: If you're reporting a bug about our interaction with other software, what software? What versions?
-    placeholder: |
-      vim 8.2 (inside WSL)
-      OpenSSH_for_Windows_8.1p1
-      My Cool Application v0.3 (include a code snippet if it would help!)
-  validations:
-    required: false
-
-- type: textarea
-  attributes:
-    label: Steps to reproduce
-    placeholder: Tell us the steps required to trigger your bug.
-  validations:
-    required: true
-
-- type: textarea
-  attributes:
-    label: Expected Behavior
-    description: If you want to include screenshots, paste them into the markdown editor below.
-    placeholder: What were you expecting?
-  validations:
-    required: false
-
-- type: textarea
-  attributes:
-    label: Actual Behavior
-    placeholder: What happened instead?
-  validations:
-    required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -1,12 +0,0 @@
-blank_issues_enabled: true
-
-contact_links:
-  - name: Microsoft Security Response Center 🔐
-    url: https://msrc.microsoft.com/create-report
-    about: Please report security vulnerabilities here.
-  - name: Windows Terminal Documentation issue 📄
-    url: https://github.com/MicrosoftDocs/terminal/issues/new
-    about: Report issues with the documentation for the Windows Terminal (in docs.microsoft.com/windows/terminal)
-  - name: Console Documentation issue 📄
-    url: https://github.com/MicrosoftDocs/console-docs/issues/new
-    about: Report issues with the documentation for the Console (in docs.microsoft.com/windows/console)

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,14 +1,19 @@
+<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
 ## Summary of the Pull Request
 
-## References and Relevant Issues
+<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? --> 
+## References
 
+<!-- Please review the items on the PR checklist before submitting-->
+## PR Checklist
+* [ ] Closes #xxx
+* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
+* [ ] Tests added/passed
+* [ ] Requires documentation to be updated
+* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
+
+<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
 ## Detailed Description of the Pull Request / Additional comments
 
+<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
 ## Validation Steps Performed
-
-## PR Checklist
-- [ ] Closes #xxx
-- [ ] Tests added/passed
-- [ ] Documentation updated
-   - If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
-- [ ] Schema updated (if necessary)

.github/actions/spelling/README.md

@@ -1,15 +0,0 @@
-# check-spelling/check-spelling configuration
-
-File | Purpose | Format | Info
--|-|-|-
-[allow/*.txt](allow/) | Add words to the dictionary | one word per line (only letters and `'`s allowed) | [allow](https://github.com/check-spelling/check-spelling/wiki/Configuration#allow)
-[reject.txt](reject.txt) | Remove words from the dictionary (after allow) | grep pattern matching whole dictionary words | [reject](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-reject)
-[excludes.txt](excludes.txt) | Files to ignore entirely | perl regular expression | [excludes](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-excludes)
-[patterns/*.txt](patterns/) | Patterns to ignore from checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
-[candidate.patterns](candidate.patterns) | Patterns that might be worth adding to [patterns.txt](patterns.txt) | perl regular expression with optional comment block introductions (all matches will be suggested) | [candidates](https://github.com/check-spelling/check-spelling/wiki/Feature:-Suggest-patterns)
-[line_forbidden.patterns](line_forbidden.patterns) | Patterns to flag in checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
-[expect/*.txt](expect.txt) | Expected words that aren't in the dictionary | one word per line (sorted, alphabetically) | [expect](https://github.com/check-spelling/check-spelling/wiki/Configuration#expect)
-[advice.md](advice.md) | Supplement for GitHub comment when unrecognized words are found | GitHub Markdown | [advice](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice)
-
-Note: you can replace any of these files with a directory by the same name (minus the suffix)
-and then include multiple files inside that directory (with that suffix) to merge multiple files together.

.github/actions/spelling/advice.md

@@ -1,48 +0,0 @@
-<!-- See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice --> <!-- markdownlint-disable MD033 MD041 -->
-<details>
-<summary>
-:pencil2: Contributor please read this
-</summary>
-
-By default the command suggestion will generate a file named based on your commit. That's generally ok as long as you add the file to your commit. Someone can reorganize it later.
-
-If the listed items are:
-
-* ... **misspelled**, then please *correct* them instead of using the command.
-* ... *names*, please add them to `.github/actions/spelling/allow/names.txt`.
-* ... APIs, you can add them to a file in `.github/actions/spelling/allow/`.
-* ... just things you're using, please add them to an appropriate file in `.github/actions/spelling/expect/`.
-* ... tokens you only need in one place and shouldn't *generally be used*, you can add an item in an appropriate file in `.github/actions/spelling/patterns/`.
-
-See the `README.md` in each directory for more information.
-
-:microscope: You can test your commits **without** *appending* to a PR by creating a new branch with that extra change and pushing it to your fork. The [check-spelling](https://github.com/marketplace/actions/check-spelling) action will run in response to your **push** -- it doesn't require an open pull request. By using such a branch, you can limit the number of typos your peers see you make. :wink:
-
-
-<details><summary>If the flagged items are :exploding_head: false positives</summary>
-
-If items relate to a ...
-* binary file (or some other file you wouldn't want to check at all).
-
-  Please add a file path to the `excludes.txt` file matching the containing file.
-
-  File paths are Perl 5 Regular Expressions - you can [test](
-https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your files.
-
-  `^` refers to the file's path from the root of the repository, so `^README\.md$` would exclude [README.md](
-../tree/HEAD/README.md) (on whichever branch you're using).
-
-* well-formed pattern.
-
-  If you can write a [pattern](
-https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns
-) that would match it,
-  try adding it to the `patterns.txt` file.
-
-  Patterns are Perl 5 Regular Expressions - you can [test](
-https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your lines.
-
-  Note that patterns can't match multiline strings.
-</details>
-
-</details>

.github/actions/spelling/allow/README.md

@@ -1,21 +0,0 @@
-# Allow files are lists of words to accept unconditionally
-
-While check spelling will complain about an expected word
-which is no longer present, you can include things here even if
-they are not otherwise present in the repository.
-
-E.g., you could include a list of system APIs here, or potential
-contributors (so that if a future commit includes their name,
-it'll be accepted).
-
-## Files
-
-| File | Description |
-| ---- | ----------- |
-| [Allow](allow.txt) | Supplements to the dictionary |
-| [Chinese](chinese.txt) | Chinese words |
-| [Japanese](japanese.txt) | Japanese words |
-| [Microsoft](microsoft.txt) | Microsoft brand items |
-| [Fonts](fonts.txt) | Font names |
-| [Names](names.txt) | Names of people |
-| [Colors](colors.txt) | Names of color |

.github/actions/spelling/allow/allow.txt

@@ -1,131 +0,0 @@
-aci
-admins
-allcolors
-Apc
-apc
-backpressure
-breadcrumb
-breadcrumbs
-bsd
-calt
-ccmp
-ccon
-changelog
-clickable
-clig
-CMMI
-copyable
-Counterintuitively
-CtrlDToClose
-cybersecurity
-dalet
-Dcs
-dcs
-deselection
-dialytika
-diffing
-dje
-downside
-downsides
-dze
-dzhe
-DTo
-EDDB
-EDDC
-Emacspeak
-Enum'd
-Fitt
-formattings
-FTCS
-ftp
-fvar
-gantt
-gcc
-geeksforgeeks
-ghe
-github
-gje
-godbolt
-hostname
-hostnames
-https
-hyperlink
-hyperlinking
-hyperlinks
-iconify
-img
-inlined
-issuetitle
-It'd
-kje
-libfuzzer
-libuv
-liga
-lje
-Llast
-llvm
-Lmid
-locl
-lol
-lorem
-Lorigin
-maxed
-megathread
-minimalistic
-mkmk
-mnt
-mru
-nje
-noreply
-ogonek
-ok'd
-overlined
-pipeline
-postmodern
-Powerline
-powerline
-ptys
-qof
-qps
-rclt
-reimplementation
-reserialization
-reserialize
-reserializes
-rlig
-runtimes
-servicebus
-shcha
-similaritytolerance
-slnt
-Sos
-ssh
-sustainability
-stakeholders
-sxn
-timeline
-timelines
-timestamped
-TLDR
-tokenizes
-tonos
-toolset
-truthiness
-tshe
-ubuntu
-uiatextrange
-UIs
-und
-unregister
-versioned
-vsdevcmd
-walkthrough
-walkthroughs
-We'd
-westus
-wildcards
-workarounds
-XBox
-YBox
-yeru
-zhe

.github/actions/spelling/allow/apis.txt

@@ -1,270 +0,0 @@
-ACCEPTFILES
-ACCESSDENIED
-acl
-aclapi
-alignas
-alignof
-APPLYTOSUBMENUS
-appxrecipe
-bitfield
-bitfields
-BUILDBRANCH
-BUILDMSG
-BUILDNUMBER
-BYCOMMAND
-BYPOSITION
-charconv
-CLASSNOTAVAILABLE
-CLOSEAPP
-cmdletbinding
-COLORPROPERTY
-colspan
-COMDLG
-commandlinetoargv
-comparand
-cstdint
-CXICON
-CYICON
-Dacl
-dataobject
-dcomp
-debugbreak
-delayimp
-DERR
-dlldata
-DNE
-DONTADDTORECENT
-DWMSBT
-DWMWA
-DWORDLONG
-endfor
-ENDSESSION
-enumset
-environstrings
-EXPCMDFLAGS
-EXPCMDSTATE
-filetime
-FILTERSPEC
-FORCEFILESYSTEM
-FORCEMINIMIZE
-frac
-fullkbd
-futex
-GETDESKWALLPAPER
-GETHIGHCONTRAST
-GETMOUSEHOVERTIME
-GETTEXTLENGTH
-Hashtable
-HIGHCONTRASTON
-HIGHCONTRASTW
-hinternet
-HINTERNET
-hotkeys
-href
-hrgn
-HTCLOSE
-hwinsta
-HWINSTA
-IActivation
-IApp
-IAppearance
-IAsync
-IBind
-IBox
-IClass
-IComparable
-IComparer
-IConnection
-ICustom
-IDialog
-IDirect
-Idn
-IExplorer
-IFACEMETHOD
-IFile
-IGraphics
-IInheritable
-IMap
-IMonarch
-IObject
-iosfwd
-IPackage
-IPeasant
-isa
-ISetup
-isspace
-IStorage
-istream
-IStringable
-ITab
-ITaskbar
-itow
-IUri
-IVirtual
-KEYSELECT
-LCID
-llabs
-llu
-localtime
-lround
-Lsa
-lsass
-LSHIFT
-LTGRAY
-MAINWINDOW
-MAXIMIZEBOX
-memchr
-memicmp
-MENUCOMMAND
-MENUDATA
-MENUINFO
-MENUITEMINFOW
-MINIMIZEBOX
-mmeapi
-MOUSELEAVE
-mov
-mptt
-msappx
-MULTIPLEUSE
-NCHITTEST
-NCLBUTTONDBLCLK
-NCMOUSELEAVE
-NCMOUSEMOVE
-NCRBUTTONDBLCLK
-NIF
-NIN
-NOAGGREGATION
-NOASYNC
-NOCHANGEDIR
-NOPROGRESS
-NOREDIRECTIONBITMAP
-NOREPEAT
-NOTIFYBYPOS
-NOTIFYICON
-NOTIFYICONDATA
-ntprivapi
-oaidl
-ocidl
-ODR
-offsetof
-ofstream
-onefuzz
-osver
-OSVERSIONINFOEXW
-otms
-OUTLINETEXTMETRICW
-overridable
-PACL
-PAGESCROLL
-PATINVERT
-PEXPLICIT
-PICKFOLDERS
-pmr
-ptstr
-QUERYENDSESSION
-rcx
-REGCLS
-RETURNCMD
-rfind
-RLO
-ROOTOWNER
-roundf
-RSHIFT
-SACL
-schandle
-SEH
-semver
-serializer
-SETVERSION
-SHELLEXECUTEINFOW
-shobjidl
-SHOWHIDE
-SHOWMINIMIZED
-SHOWTIP
-SINGLEUSE
-SIZENS
-smoothstep
-snprintf
-spsc
-sregex
-SRWLOC
-srwlock
-SRWLOCK
-STDCPP
-STDMETHOD
-strchr
-strcpy
-streambuf
-strtoul
-Stubless
-Subheader
-Subpage
-syscall
-SYSTEMBACKDROP
-TABROW
-TASKBARCREATED
-TBPF
-THEMECHANGED
-THICKFRAME
-tlg
-TME
-tmp
-tmpdir
-tokeninfo
-tolower
-toupper
-TRACKMOUSEEVENT
-TTask
-TVal
-UChar
-UFIELD
-ULARGE
-UOI
-UPDATEINIFILE
-urlmon
-userenv
-USEROBJECTFLAGS
-Vcpp
-Viewbox
-virtualalloc
-vsnwprintf
-wcsnlen
-wcsstr
-wcstoui
-WDJ
-winhttp
-wininet
-winmain
-winsta
-winstamin
-wmemcmp
-wpc
-WSF
-wsregex
-WWH
-wwinmain
-xchg
-XDocument
-XElement
-xfacet
-xhash
-XIcon
-xiosbase
-xlocale
-xlocbuf
-xlocinfo
-xlocmes
-xlocmon
-xlocnum
-xloctime
-XMax
-xmemory
-XParse
-xpath
-xstddef
-xstring
-xtree
-xutility
-YIcon
-YMax
-zwstring

.github/actions/spelling/allow/chinese.txt

@@ -1,5 +0,0 @@
-CHINESEBIG
-choseong
-Jongseong
-Jungseong
-ssangtikeut

.github/actions/spelling/allow/colors.txt

@@ -1,117 +0,0 @@
-alice
-aliceblue
-antiquewhite
-blanchedalmond
-blueviolet
-burlywood
-cadetblue
-cornflowerblue
-cornsilk
-cyan
-darkblue
-darkcyan
-darkgoldenrod
-darkgray
-darkgreen
-darkgrey
-darkkhaki
-darkmagenta
-darkolivegreen
-darkorange
-darkorchid
-darkred
-darksalmon
-darkseagreen
-darkslateblue
-darkslategray
-darkslategrey
-darkturquoise
-darkviolet
-deeppink
-deepskyblue
-dimgray
-dimgrey
-dodgerblue
-firebrick
-floralwhite
-forestgreen
-gainsboro
-ghostwhite
-greenyellow
-hotpink
-indian
-indianred
-lavenderblush
-lawngreen
-lemonchiffon
-lightblue
-lightcoral
-lightcyan
-lightgoldenrod
-lightgoldenrodyellow
-lightgray
-lightgreen
-lightgrey
-lightpink
-lightsalmon
-lightseagreen
-lightskyblue
-lightslateblue
-lightslategray
-lightslategrey
-lightsteelblue
-lightyellow
-limegreen
-mediumaquamarine
-mediumblue
-mediumorchid
-mediumpurple
-mediumseagreen
-mediumslateblue
-mediumspringgreen
-mediumturquoise
-mediumvioletred
-midnightblue
-mintcream
-mistyrose
-navajo
-navajowhite
-navyblue
-oldlace
-olivedrab
-orangered
-palegoldenrod
-palegreen
-paleturquoise
-palevioletred
-papayawhip
-peachpuff
-peru
-powderblue
-rebecca
-rebeccapurple
-rosybrown
-royalblue
-saddlebrown
-sandybrown
-seagreen
-sienna
-skyblue
-slateblue
-slategray
-slategrey
-springgreen
-steelblue
-violetred
-webgray
-webgreen
-webgrey
-webmaroon
-webpurple
-whitesmoke
-xaroon
-xray
-xreen
-xrey
-xurple
-yellowgreen

.github/actions/spelling/allow/fonts.txt

@@ -1,10 +0,0 @@
-Consolas
-emoji
-emojis
-Extralight
-Gabriola
-Iosevka
-MDL
-Monofur
-Segoe
-wght

.github/actions/spelling/allow/japanese.txt

@@ -1,4 +0,0 @@
-arigatoo
-doomo
-Kaomojis
-TATEGAKI

.github/actions/spelling/allow/math.txt

@@ -1,11 +0,0 @@
-atan
-CPrime
-HBar
-HPrime
-isnan
-LPrime
-LStep
-powf
-RSub
-sqrtf
-ULP

.github/actions/spelling/allow/microsoft.txt

@@ -1,97 +0,0 @@
-ACLs
-ADMINS
-advapi
-altform
-altforms
-appendwttlogging
-appinstaller
-appx
-appxbundle
-appxerror
-appxmanifest
-ATL
-autoexec
-backplating
-bitmaps
-BOMs
-COMPUTERNAME
-CPLs
-cpptools
-cppvsdbg
-CPRs
-cryptbase
-DACL
-DACLs
-defaultlib
-diffs
-disposables
-dotnetfeed
-DTDs
-DWINRT
-enablewttlogging
-HOMESHARE
-Intelli
-IVisual
-libucrt
-libucrtd
-LKG
-LOCKFILE
-Lxss
-makepri
-mfcribbon
-microsoft
-microsoftonline
-MSAA
-msixbundle
-MSVC
-MSVCP
-muxc
-netcore
-Onefuzz
-osgvsowi
-PFILETIME
-pgc
-pgo
-pgosweep
-powerrename
-powershell
-priconfig
-PRIINFO
-propkey
-pscustomobject
-QWORD
-rdpclip
-regedit
-resfiles
-robocopy
-SACLs
-sdkddkver
-segoe
-Shobjidl
-sid
-Skype
-SRW
-sxs
-Sysinternals
-sysnative
-systemroot
-taskkill
-tasklist
-tdbuildteamid
-ucrt
-ucrtd
-unvirtualized
-USERDNSDOMAIN
-VCRT
-vcruntime
-Virtualization
-visualstudio
-vscode
-VSTHRD
-winsdkver
-wlk
-wslpath
-wtl
-wtt
-wttlog
-Xamarin

.github/actions/spelling/allow/names.txt

@@ -1,99 +0,0 @@
-Anup
-arkthur
-austdi
-Ballmer
-bhoj
-Bhojwani
-Bluloco
-carlos
-craigloewen
-dhowett
-Diviness
-dsafa
-duhowett
-DXP
-ekg
-eryksun
-ethanschoonover
-Firefox
-Gatta
-glsl
-Gravell
-Grie
-Griese
-Hernan
-Howett
-Illhardt
-Imms
-iquilezles
-italo
-jantari
-jerrysh
-Kaiyu
-kimwalisch
-KMehrain
-Kodelife
-KODELIFE
-Kourosh
-kowalczyk
-leonardder
-leonmsft
-Lepilleur
-lhecker
-lukesampson
-Macbook
-Manandhar
-masserano
-mbadolato
-Mehrain
-menger
-mgravell
-michaelniksa
-michkap
-migrie
-mikegr
-mikemaccana
-miloush
-miniksa
-nguyen
-niksa
-nvaccess
-nvda
-oising
-oldnewthing
-opengl
-osgwiki
-Ottosson
-pabhojwa
-panos
-paulcam
-pauldotknopf
-PGP
-Pham
-Rincewind
-rprichard
-Schoonover
-shadertoy
-Shomnipotence
-simioni
-Somuah
-sonph
-sonpham
-stakx
-talo
-thereses
-Thysell
-Walisch
-WDX
-Wellons
-Westerman
-Wirt
-Wojciech
-zadjii
-Zamor
-zamora
-Zamora
-zljubisic
-Zoey
-zorio
-Zverovich

.github/actions/spelling/candidate.patterns

@@ -1,643 +0,0 @@
-# marker to ignore all code on line
-^.*/\* #no-spell-check-line \*/.*$
-# marker to ignore all code on line
-^.*\bno-spell-check(?:-line|)(?:\s.*|)$
-
-# https://cspell.org/configuration/document-settings/
-# cspell inline
-^.*\b[Cc][Ss][Pp][Ee][Ll]{2}:\s*[Dd][Ii][Ss][Aa][Bb][Ll][Ee]-[Ll][Ii][Nn][Ee]\b
-
-# patch hunk comments
-^\@\@ -\d+(?:,\d+|) \+\d+(?:,\d+|) \@\@ .*
-# git index header
-index (?:[0-9a-z]{7,40},|)[0-9a-z]{7,40}\.\.[0-9a-z]{7,40}
-
-# file permissions
-['"`\s][-bcdLlpsw](?:[-r][-w][-Ssx]){2}[-r][-w][-SsTtx]\+?['"`\s]
-
-# css url wrappings
-\burl\([^)]+\)
-
-# cid urls
-(['"])cid:.*?\g{-1}
-
-# data url in parens
-#\(data:(?:[^) ][^)]*?|)(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})[^)]*\)
-
-# data url in quotes
-([`'"])data:(?:[^ `'"].*?|)(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,}).*\g{-1}
-# data url
-data:[-a-zA-Z=;:/0-9+]*,\S*
-
-# https/http/file urls
-(?:\b(?:https?|ftp|file)://)[-A-Za-z0-9+&@#/%?=~_|!:,.;]+[-A-Za-z0-9+&@#/%=~_|]
-
-# mailto urls
-mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
-
-# magnet urls
-magnet:[?=:\w]+
-
-# magnet urls
-"magnet:[^"]+"
-
-# obs:
-"obs:[^"]*"
-
-# The `\b` here means a break, it's the fancy way to handle urls, but it makes things harder to read
-# In this examples content, I'm using a number of different ways to match things to show various approaches
-# asciinema
-\basciinema\.org/a/[0-9a-zA-Z]+
-
-# asciinema v2
-^\[\d+\.\d+, "[io]", ".*"\]$
-
-# apple
-\bdeveloper\.apple\.com/[-\w?=/]+
-# Apple music
-\bembed\.music\.apple\.com/fr/playlist/usr-share/[-\w.]+
-
-# appveyor api
-\bci\.appveyor\.com/api/projects/status/[0-9a-z]+
-# appveyor project
-\bci\.appveyor\.com/project/(?:[^/\s"]*/){2}builds?/\d+/job/[0-9a-z]+
-
-# Amazon
-
-# Amazon
-\bamazon\.com/[-\w]+/(?:dp/[0-9A-Z]+|)
-# AWS S3
-\b\w*\.s3[^.]*\.amazonaws\.com/[-\w/&#%_?:=]*
-# AWS execute-api
-\b[0-9a-z]{10}\.execute-api\.[-0-9a-z]+\.amazonaws\.com\b
-# AWS ELB
-\b\w+\.[-0-9a-z]+\.elb\.amazonaws\.com\b
-# AWS SNS
-\bsns\.[-0-9a-z]+.amazonaws\.com/[-\w/&#%_?:=]*
-# AWS VPC
-vpc-\w+
-
-# While you could try to match `http://` and `https://` by using `s?` in `https?://`, sometimes there
-# YouTube url
-\b(?:(?:www\.|)youtube\.com|youtu.be)/(?:channel/|embed/|user/|playlist\?list=|watch\?v=|v/|)[-a-zA-Z0-9?&=_%]*
-# YouTube music
-\bmusic\.youtube\.com/youtubei/v1/browse(?:[?&]\w+=[-a-zA-Z0-9?&=_]*)
-# YouTube tag
-<\s*youtube\s+id=['"][-a-zA-Z0-9?_]*['"]
-# YouTube image
-\bimg\.youtube\.com/vi/[-a-zA-Z0-9?&=_]*
-# Google Accounts
-\baccounts.google.com/[-_/?=.:;+%&0-9a-zA-Z]*
-# Google Analytics
-\bgoogle-analytics\.com/collect.[-0-9a-zA-Z?%=&_.~]*
-# Google APIs
-\bgoogleapis\.(?:com|dev)/[a-z]+/(?:v\d+/|)[a-z]+/[-@:./?=\w+|&]+
-# Google Storage
-\b[-a-zA-Z0-9.]*\bstorage\d*\.googleapis\.com(?:/\S*|)
-# Google Calendar
-\bcalendar\.google\.com/calendar(?:/u/\d+|)/embed\?src=[@./?=\w&%]+
-\w+\@group\.calendar\.google\.com\b
-# Google DataStudio
-\bdatastudio\.google\.com/(?:(?:c/|)u/\d+/|)(?:embed/|)(?:open|reporting|datasources|s)/[-0-9a-zA-Z]+(?:/page/[-0-9a-zA-Z]+|)
-# The leading `/` here is as opposed to the `\b` above
-# ... a short way to match `https://` or `http://` since most urls have one of those prefixes
-# Google Docs
-/docs\.google\.com/[a-z]+/(?:ccc\?key=\w+|(?:u/\d+|d/(?:e/|)[0-9a-zA-Z_-]+/)?(?:edit\?[-\w=#.]*|/\?[\w=&]*|))
-# Google Drive
-\bdrive\.google\.com/(?:file/d/|open)[-0-9a-zA-Z_?=]*
-# Google Groups
-\bgroups\.google\.com(?:/[a-z]+/(?:#!|)[^/\s"]+)*
-# Google Maps
-\bmaps\.google\.com/maps\?[\w&;=]*
-# Google themes
-themes\.googleusercontent\.com/static/fonts/[^/\s"]+/v\d+/[^.]+.
-# Google CDN
-\bclients2\.google(?:usercontent|)\.com[-0-9a-zA-Z/.]*
-# Goo.gl
-/goo\.gl/[a-zA-Z0-9]+
-# Google Chrome Store
-\bchrome\.google\.com/webstore/detail/[-\w]*(?:/\w*|)
-# Google Books
-\bgoogle\.(?:\w{2,4})/books(?:/\w+)*\?[-\w\d=&#.]*
-# Google Fonts
-\bfonts\.(?:googleapis|gstatic)\.com/[-/?=:;+&0-9a-zA-Z]*
-# Google Forms
-\bforms\.gle/\w+
-# Google Scholar
-\bscholar\.google\.com/citations\?user=[A-Za-z0-9_]+
-# Google Colab Research Drive
-\bcolab\.research\.google\.com/drive/[-0-9a-zA-Z_?=]*
-
-# GitHub SHAs (api)
-\bapi.github\.com/repos(?:/[^/\s"]+){3}/[0-9a-f]+\b
-# GitHub SHAs (markdown)
-(?:\[`?[0-9a-f]+`?\]\(https:/|)/(?:www\.|)github\.com(?:/[^/\s"]+){2,}(?:/[^/\s")]+)(?:[0-9a-f]+(?:[-0-9a-zA-Z/#.]*|)\b|)
-# GitHub SHAs
-\bgithub\.com(?:/[^/\s"]+){2}[@#][0-9a-f]+\b
-# GitHub SHA refs
-\[([0-9a-f]+)\]\(https://(?:www\.|)github.com/[-\w]+/[-\w]+/commit/\g{-1}[0-9a-f]*
-# GitHub wiki
-\bgithub\.com/(?:[^/]+/){2}wiki/(?:(?:[^/]+/|)_history|[^/]+(?:/_compare|)/[0-9a-f.]{40,})\b
-# githubusercontent
-/[-a-z0-9]+\.githubusercontent\.com/[-a-zA-Z0-9?&=_\/.]*
-# githubassets
-\bgithubassets.com/[0-9a-f]+(?:[-/\w.]+)
-# gist github
-\bgist\.github\.com/[^/\s"]+/[0-9a-f]+
-# git.io
-\bgit\.io/[0-9a-zA-Z]+
-# GitHub JSON
-"node_id": "[-a-zA-Z=;:/0-9+_]*"
-# Contributor
-\[[^\]]+\]\(https://github\.com/[^/\s"]+/?\)
-# GHSA
-GHSA(?:-[0-9a-z]{4}){3}
-
-# GitLab commit
-\bgitlab\.[^/\s"]*/\S+/\S+/commit/[0-9a-f]{7,16}#[0-9a-f]{40}\b
-# GitLab merge requests
-\bgitlab\.[^/\s"]*/\S+/\S+/-/merge_requests/\d+/diffs#[0-9a-f]{40}\b
-# GitLab uploads
-\bgitlab\.[^/\s"]*/uploads/[-a-zA-Z=;:/0-9+]*
-# GitLab commits
-\bgitlab\.[^/\s"]*/(?:[^/\s"]+/){2}commits?/[0-9a-f]+\b
-
-# binance
-accounts\.binance\.com/[a-z/]*oauth/authorize\?[-0-9a-zA-Z&%]*
-
-# bitbucket diff
-\bapi\.bitbucket\.org/\d+\.\d+/repositories/(?:[^/\s"]+/){2}diff(?:stat|)(?:/[^/\s"]+){2}:[0-9a-f]+
-# bitbucket repositories commits
-\bapi\.bitbucket\.org/\d+\.\d+/repositories/(?:[^/\s"]+/){2}commits?/[0-9a-f]+
-# bitbucket commits
-\bbitbucket\.org/(?:[^/\s"]+/){2}commits?/[0-9a-f]+
-
-# bit.ly
-\bbit\.ly/\w+
-
-# bitrise
-\bapp\.bitrise\.io/app/[0-9a-f]*/[\w.?=&]*
-
-# bootstrapcdn.com
-\bbootstrapcdn\.com/[-./\w]+
-
-# cdn.cloudflare.com
-\bcdnjs\.cloudflare\.com/[./\w]+
-
-# circleci
-\bcircleci\.com/gh(?:/[^/\s"]+){1,5}.[a-z]+\?[-0-9a-zA-Z=&]+
-
-# gitter
-\bgitter\.im(?:/[^/\s"]+){2}\?at=[0-9a-f]+
-
-# gravatar
-\bgravatar\.com/avatar/[0-9a-f]+
-
-# ibm
-[a-z.]*ibm\.com/[-_#=:%!?~.\\/\d\w]*
-
-# imgur
-\bimgur\.com/[^.]+
-
-# Internet Archive
-\barchive\.org/web/\d+/(?:[-\w.?,'/\\+&%$#_:]*)
-
-# discord
-/discord(?:app\.com|\.gg)/(?:invite/)?[a-zA-Z0-9]{7,}
-
-# Disqus
-\bdisqus\.com/[-\w/%.()!?&=_]*
-
-# medium link
-\blink\.medium\.com/[a-zA-Z0-9]+
-# medium
-\bmedium\.com/\@?[^/\s"]+/[-\w]+
-
-# microsoft
-\b(?:https?://|)(?:(?:download\.visualstudio|docs|msdn2?|research)\.microsoft|blogs\.msdn)\.com/[-_a-zA-Z0-9()=./%]*
-# powerbi
-\bapp\.powerbi\.com/reportEmbed/[^"' ]*
-# vs devops
-\bvisualstudio.com(?::443|)/[-\w/?=%&.]*
-# microsoft store
-\bmicrosoft\.com/store/apps/\w+
-
-# mvnrepository.com
-\bmvnrepository\.com/[-0-9a-z./]+
-
-# now.sh
-/[0-9a-z-.]+\.now\.sh\b
-
-# oracle
-\bdocs\.oracle\.com/[-0-9a-zA-Z./_?#&=]*
-
-# chromatic.com
-/\S+.chromatic.com\S*[")]
-
-# codacy
-\bapi\.codacy\.com/project/badge/Grade/[0-9a-f]+
-
-# compai
-\bcompai\.pub/v1/png/[0-9a-f]+
-
-# mailgun api
-\.api\.mailgun\.net/v3/domains/[0-9a-z]+\.mailgun.org/messages/[0-9a-zA-Z=@]*
-# mailgun
-\b[0-9a-z]+.mailgun.org
-
-# /message-id/
-/message-id/[-\w@./%]+
-
-# Reddit
-\breddit\.com/r/[/\w_]*
-
-# requestb.in
-\brequestb\.in/[0-9a-z]+
-
-# sched
-\b[a-z0-9]+\.sched\.com\b
-
-# Slack url
-slack://[a-zA-Z0-9?&=]+
-# Slack
-\bslack\.com/[-0-9a-zA-Z/_~?&=.]*
-# Slack edge
-\bslack-edge\.com/[-a-zA-Z0-9?&=%./]+
-# Slack images
-\bslack-imgs\.com/[-a-zA-Z0-9?&=%.]+
-
-# shields.io
-\bshields\.io/[-\w/%?=&.:+;,]*
-
-# stackexchange -- https://stackexchange.com/feeds/sites
-\b(?:askubuntu|serverfault|stack(?:exchange|overflow)|superuser).com/(?:questions/\w+/[-\w]+|a/)
-
-# Sentry
-[0-9a-f]{32}\@o\d+\.ingest\.sentry\.io\b
-
-# Twitter markdown
-\[\@[^[/\]:]*?\]\(https://twitter.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)\)
-# Twitter hashtag
-\btwitter\.com/hashtag/[\w?_=&]*
-# Twitter status
-\btwitter\.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)
-# Twitter profile images
-\btwimg\.com/profile_images/[_\w./]*
-# Twitter media
-\btwimg\.com/media/[-_\w./?=]*
-# Twitter link shortened
-\bt\.co/\w+
-
-# facebook
-\bfburl\.com/[0-9a-z_]+
-# facebook CDN
-\bfbcdn\.net/[\w/.,]*
-# facebook watch
-\bfb\.watch/[0-9A-Za-z]+
-
-# dropbox
-\bdropbox\.com/sh?/[^/\s"]+/[-0-9A-Za-z_.%?=&;]+
-
-# ipfs protocol
-ipfs://[0-9a-zA-Z]{3,}
-# ipfs url
-/ipfs/[0-9a-zA-Z]{3,}
-
-# w3
-\bw3\.org/[-0-9a-zA-Z/#.]+
-
-# loom
-\bloom\.com/embed/[0-9a-f]+
-
-# regex101
-\bregex101\.com/r/[^/\s"]+/\d+
-
-# figma
-\bfigma\.com/file(?:/[0-9a-zA-Z]+/)+
-
-# freecodecamp.org
-\bfreecodecamp\.org/[-\w/.]+
-
-# image.tmdb.org
-\bimage\.tmdb\.org/[/\w.]+
-
-# mermaid
-\bmermaid\.ink/img/[-\w]+|\bmermaid-js\.github\.io/mermaid-live-editor/#/edit/[-\w]+
-
-# Wikipedia
-\ben\.wikipedia\.org/wiki/[-\w%.#]+
-
-# gitweb
-[^"\s]+/gitweb/\S+;h=[0-9a-f]+
-
-# HyperKitty lists
-/archives/list/[^@/]+\@[^/\s"]*/message/[^/\s"]*/
-
-# lists
-/thread\.html/[^"\s]+
-
-# list-management
-\blist-manage\.com/subscribe(?:[?&](?:u|id)=[0-9a-f]+)+
-
-# kubectl.kubernetes.io/last-applied-configuration
-"kubectl.kubernetes.io/last-applied-configuration": ".*"
-
-# pgp
-\bgnupg\.net/pks/lookup[?&=0-9a-zA-Z]*
-
-# Spotify
-\bopen\.spotify\.com/embed/playlist/\w+
-
-# Mastodon
-\bmastodon\.[-a-z.]*/(?:media/|\@)[?&=0-9a-zA-Z_]*
-
-# scastie
-\bscastie\.scala-lang\.org/[^/]+/\w+
-
-# images.unsplash.com
-\bimages\.unsplash\.com/(?:(?:flagged|reserve)/|)[-\w./%?=%&.;]+
-
-# pastebin
-\bpastebin\.com/[\w/]+
-
-# heroku
-\b\w+\.heroku\.com/source/archive/\w+
-
-# quip
-\b\w+\.quip\.com/\w+(?:(?:#|/issues/)\w+)?
-
-# badgen.net
-\bbadgen\.net/badge/[^")\]'\s]+
-
-# statuspage.io
-\w+\.statuspage\.io\b
-
-# media.giphy.com
-\bmedia\.giphy\.com/media/[^/]+/[\w.?&=]+
-
-# tinyurl
-\btinyurl\.com/\w+
-
-# codepen
-\bcodepen\.io/[\w/]+
-
-# registry.npmjs.org
-\bregistry\.npmjs\.org/(?:@[^/"']+/|)[^/"']+/-/[-\w@.]+
-
-# getopts
-\bgetopts\s+(?:"[^"]+"|'[^']+')
-
-# ANSI color codes
-(?:\\(?:u00|x)1[Bb]|\x1b|\\u\{1[Bb]\})\[\d+(?:;\d+|)m
-
-# URL escaped characters
-\%[0-9A-F][A-F](?=[A-Za-z])
-# lower URL escaped characters
-\%[0-9a-f][a-f](?=[a-z]{2,})
-# IPv6
-#\b(?:[0-9a-fA-F]{0,4}:){3,7}[0-9a-fA-F]{0,4}\b
-
-# c99 hex digits (not the full format, just one I've seen)
-0x[0-9a-fA-F](?:\.[0-9a-fA-F]*|)[pP]
-# Punycode
-\bxn--[-0-9a-z]+
-# sha
-sha\d+:[0-9]*[a-f]{3,}[0-9a-f]*
-# sha-... -- uses a fancy capture
-(\\?['"]|&quot;)[0-9a-f]{40,}\g{-1}
-# hex runs
-\b[0-9a-fA-F]{16,}\b
-# hex in url queries
-=[0-9a-fA-F]*?(?:[A-F]{3,}|[a-f]{3,})[0-9a-fA-F]*?&
-# ssh
-(?:ssh-\S+|-nistp256) [-a-zA-Z=;:/0-9+]{12,}
-
-# PGP
-\b(?:[0-9A-F]{4} ){9}[0-9A-F]{4}\b
-# GPG keys
-\b(?:[0-9A-F]{4} ){5}(?: [0-9A-F]{4}){5}\b
-# Well known gpg keys
-.well-known/openpgpkey/[\w./]+
-
-# pki
------BEGIN.*-----END
-
-# uuid:
-\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
-# hex digits including css/html color classes:
-(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|[iu]\d+)\b
-# integrity
-integrity=(['"])(?:\s*sha\d+-[-a-zA-Z=;:/0-9+]{40,})+\g{-1}
-
-# https://www.gnu.org/software/groff/manual/groff.html
-# man troff content
-\\f[BCIPR]
-# '/"
-\\\([ad]q
-
-# .desktop mime types
-^MimeTypes?=.*$
-# .desktop localized entries
-^[A-Z][a-z]+\[[a-z]+\]=.*$
-# Localized .desktop content
-Name\[[^\]]+\]=.*
-
-# IServiceProvider / isAThing
-\b(?:I|isA)(?=(?:[A-Z][a-z]{2,})+\b)
-
-# crypt
-(['"])\$2[ayb]\$.{56}\g{-1}
-
-# scrypt / argon
-\$(?:scrypt|argon\d+[di]*)\$\S+
-
-# go.sum
-\bh1:\S+
-
-# scala modules
-("[^"]+"\s*%%?\s*){2,3}"[^"]+"
-
-# Input to GitHub JSON
-content: (['"])[-a-zA-Z=;:/0-9+]*=\g{-1}
-
-# This does not cover multiline strings, if your repository has them,
-# you'll want to remove the `(?=.*?")` suffix.
-# The `(?=.*?")` suffix should limit the false positives rate
-# printf
-#%(?:(?:(?:hh?|ll?|[jzt])?[diuoxn]|l?[cs]|L?[fega]|p)(?=[a-z]{2,})|(?:X|L?[FEGA]|p)(?=[a-zA-Z]{2,}))(?=[_a-zA-Z]+\b)(?!%)(?=.*?['"])
-
-# Python string prefix / binary prefix
-# Note that there's a high false positive rate, remove the `?=` and search for the regex to see if the matches seem like reasonable strings
-(?<!')\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'(?=[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
-
-# Regular expressions for (P|p)assword
-\([A-Z]\|[a-z]\)[a-z]+
-
-# JavaScript regular expressions
-# javascript test regex
-/.*/[gim]*\.test\(
-# javascript match regex
-\.match\(/[^/\s"]*/[gim]*\s*
-# javascript match regex
-\.match\(/\\[b].*?/[gim]*\s*\)(?:;|$)
-# javascript regex
-^\s*/\\[b].*/[gim]*\s*(?:\)(?:;|$)|,$)
-# javascript replace regex
-\.replace\(/[^/\s"]*/[gim]*\s*,
-# assign regex
-= /[^*]*?(?:[a-z]{3,}|[A-Z]{3,}|[A-Z][a-z]{2,}).*/
-# perl regex test
-[!=]~ (?:/.*/|m\{.*?\}|m<.*?>|m([|!/@#,;']).*?\g{-1})
-
-# perl qr regex
-(?<!\$)\bqr(?:\{.*?\}|<.*?>|\(.*?\)|([|!/@#,;']).*?\g{-1})
-
-# Go regular expressions
-regexp?\.MustCompile\(`[^`]*`\)
-
-# regex choice
-\(\?:[^)]+\|[^)]+\)
-
-# proto
-^\s*(\w+)\s\g{-1} =
-
-# sed regular expressions
-sed 's/(?:[^/]*?[a-zA-Z]{3,}[^/]*?/){2}
-
-# node packages
-(["'])\@[^/'" ]+/[^/'" ]+\g{-1}
-
-# go install
-go install(?:\s+[a-z]+\.[-@\w/.]+)+
-
-# jetbrains schema https://youtrack.jetbrains.com/issue/RSRP-489571
-urn:shemas-jetbrains-com
-
-# kubernetes pod status lists
-# https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-phase
-\w+(?:-\w+)+\s+\d+/\d+\s+(?:Running|Pending|Succeeded|Failed|Unknown)\s+
-
-# kubectl - pods in CrashLoopBackOff
-\w+-[0-9a-f]+-\w+\s+\d+/\d+\s+CrashLoopBackOff\s+
-
-# kubernetes object suffix
--[0-9a-f]{10}-\w{5}\s
-
-# posthog secrets
-([`'"])phc_[^"',]+\g{-1}
-
-# xcode
-
-# xcodeproject scenes
-(?:Controller|destination|ID|id)="\w{3}-\w{2}-\w{3}"
-
-# xcode api botches
-customObjectInstantitationMethod
-
-# configure flags
-.* \| --\w{2,}.*?(?=\w+\s\w+)
-
-# font awesome classes
-\.fa-[-a-z0-9]+
-
-# bearer auth
-(['"])Bear[e][r] .*?\g{-1}
-
-# basic auth
-(['"])Basic [-a-zA-Z=;:/0-9+]{3,}\g{-1}
-
-# base64 encoded content
-#([`'"])[-a-zA-Z=;:/0-9+]+=\g{-1}
-# base64 encoded content in xml/sgml
->[-a-zA-Z=;:/0-9+]+=</
-# base64 encoded content, possibly wrapped in mime
-#(?:^|[\s=;:?])[-a-zA-Z=;:/0-9+]{50,}(?:[\s=;:?]|$)
-
-# encoded-word
-=\?[-a-zA-Z0-9"*%]+\?[BQ]\?[^?]{0,75}\?=
-
-# Time Zones
-\b(?:Africa|Atlantic|America|Antarctica|Asia|Australia|Europe|Indian|Pacific)(?:/\w+)+
-
-# linux kernel info
-^(?:bugs|flags|Features)\s+:.*
-
-# systemd mode
-systemd.*?running in system mode \([-+].*\)$
-
-# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
-# grep '^[^#].*lorem' .github/actions/spelling/patterns.txt|perl -pne 's/.*i..\?://;s/\).*//' |tr '|' "\n"|sort -f |xargs -n1 ge|perl -pne 's/^[^:]*://'|sort -u|w|sed -e 's/ .*//'|w|review -
-# Warning, while `(?i)` is very neat and fancy, if you have some binary files that aren't proper unicode, you might run into:
-## Operation "substitution (s///)" returns its argument for non-Unicode code point 0x1C19AE (the code point will vary).
-## You could manually change `(?i)X...` to use `[Xx]...`
-## or you could add the files to your `excludes` file (a version after 0.0.19 should identify the file path)
-# Lorem
-(?:\w|\s|[,.])*\b(?i)(?:amet|consectetur|cursus|dolor|eros|ipsum|lacus|libero|ligula|lorem|magna|neque|nulla|suscipit|tempus)\b(?:\w|\s|[,.])*
-
-# Non-English
-[a-zA-Z]*[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*|[a-zA-Z]{3,}[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]|[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3,}
-
-# highlighted letters
-\[[A-Z]\][a-z]+
-
-# French
-# This corpus only had capital letters, but you probably want lowercase ones as well.
-\b[LN]'+[a-z]{2,}\b
-
-# latex (check-spelling <= 0.0.21)
-#\\(?:n(?:ew|ormal|osub)|r(?:enew)|t(?:able(?:of|)|he|itle))(?=[a-z]+)
-
-# latex (check-spelling >= 0.0.22)
-\\\w{2,}\{
-
-# eslint
-"varsIgnorePattern": ".+"
-
-# Windows short paths
-[/\\][^/\\]{5,6}~\d{1,2}[/\\]
-
-# in check-spelling@v0.0.22+, printf markers aren't automatically consumed
-# printf markers
-#(?<!\\)\\[nrt](?=[a-z]{2,})
-
-# alternate markers if you run into latex and friends
-#(?<!\\)\\[nrt](?=[a-z]{2,})(?=.*['"`])
-
-# apache
-a2(?:en|dis)
-
-# weak e-tag
-W/"[^"]+"
-
-# the negative lookahead here is to allow catching 'templatesz' as a misspelling
-# but to otherwise recognize a Windows path with \templates\foo.template or similar:
-#\\(?:necessary|r(?:eport|esolve[dr]?|esult)|t(?:arget|emplates?))(?![a-z])
-
-# ignore long runs of a single character:
-\b([A-Za-z])\g{-1}{3,}\b
-
-# version suffix <word>v#
-(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
-
-# Compiler flags (Unix, Java/Scala)
-# Use if you have things like `-Pdocker` and want to treat them as `docker`
-#(?:^|[\t ,>"'`=(])-(?:(?:J-|)[DPWXY]|[Llf])(?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
-
-# Compiler flags (Windows / PowerShell)
-# This is a subset of the more general compiler flags pattern.
-# It avoids matching `-Path` to prevent it from being treated as `ath`
-#(?:^|[\t ,"'`=(])-(?:[DPL](?=[A-Z]{2,})|[WXYlf](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,}))
-
-# Compiler flags (linker)
-,-B
-
-# curl arguments
-\b(?:\\n|)curl(?:\s+-[a-zA-Z]{1,2}\b)*(?:\s+-[a-zA-Z]{3,})(?:\s+-[a-zA-Z]+)*
-# set arguments
-\bset(?:\s+-[abefimouxE]{1,2})*\s+-[abefimouxE]{3,}(?:\s+-[abefimouxE]+)*
-# tar arguments
-\b(?:\\n|)g?tar(?:\.exe|)(?:(?:\s+--[-a-zA-Z]+|\s+-[a-zA-Z]+|\s[ABGJMOPRSUWZacdfh-pr-xz]+\b)(?:=[^ ]*|))+
-# tput arguments -- https://man7.org/linux/man-pages/man5/terminfo.5.html -- technically they can be more than 5 chars long...
-\btput\s+(?:(?:-[SV]|-T\s*\w+)\s+)*\w{3,5}\b
-# macOS temp folders
-/var/folders/\w\w/[+\w]+/(?:T|-Caches-)/

.github/actions/spelling/excludes.txt

@@ -1,127 +0,0 @@
-# See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-excludes
-(?:^|/)(?i)COPYRIGHT
-(?:^|/)(?i)LICEN[CS]E
-(?:^|/)3rdparty/
-(?:^|/)dirs$
-(?:^|/)go\.sum$
-(?:^|/)package(?:-lock|)\.json$
-(?:^|/)Pipfile$
-(?:^|/)pyproject.toml
-(?:^|/)requirements(?:-dev|-doc|-test|)\.txt$
-(?:^|/)sources(?:|\.dep)$
-(?:^|/)vendor/
-\.a$
-\.ai$
-\.all-contributorsrc$
-\.avi$
-\.bmp$
-\.bz2$
-\.cer$
-\.class$
-\.coveragerc$
-\.crl$
-\.crt$
-\.csr$
-\.dll$
-\.docx?$
-\.drawio$
-\.DS_Store$
-\.eot$
-\.eps$
-\.exe$
-\.gif$
-\.git-blame-ignore-revs$
-\.gitattributes$
-\.gitignore$
-\.gitkeep$
-\.graffle$
-\.gz$
-\.icns$
-\.ico$
-\.ipynb$
-\.jar$
-\.jks$
-\.jpeg$
-\.jpg$
-\.key$
-\.lib$
-\.lock$
-\.map$
-\.min\..
-\.mo$
-\.mod$
-\.mp3$
-\.mp4$
-\.o$
-\.ocf$
-\.otf$
-\.p12$
-\.parquet$
-\.pbxproj$
-\.pdf$
-\.pem$
-\.pfx$
-\.png$
-\.psd$
-\.pyc$
-\.pylintrc$
-\.qm$
-\.runsettings$
-\.s$
-\.sig$
-\.so$
-\.svg$
-\.svgz$
-\.sys$
-\.tar$
-\.tgz$
-\.tiff?$
-\.ttf$
-\.vcxproj\.filters$
-\.vsdx$
-\.wav$
-\.webm$
-\.webp$
-\.woff
-\.xcf$
-\.xlsx?$
-\.xpm$
-\.xz$
-\.zip$
-^\.github/actions/spelling/
-^\Q.github/workflows/spelling.yml\E$
-^\Qbuild/config/release.gdnbaselines\E$
-^\Qsrc/host/ft_host/chafa.txt\E$
-^\Qsrc/host/ft_uia/run.bat\E$
-^\Qsrc/host/runft.bat\E$
-^\Qsrc/tools/lnkd/lnkd.bat\E$
-^\Qsrc/tools/pixels/pixels.bat\E$
-^build/config/
-^consolegit2gitfilters\.json$
-^dep/
-^doc/reference/master-sequence-list\.csv$
-^doc/reference/UTF8-torture-test\.txt$
-^doc/reference/windows-terminal-logo\.ans$
-^oss/
-^samples/PixelShaders/Screenshots/
-^src/interactivity/onecore/BgfxEngine\.
-^src/renderer/atlas/
-^src/renderer/wddmcon/WddmConRenderer\.
-^src/terminal/adapter/ut_adapter/run\.bat$
-^src/terminal/parser/delfuzzpayload\.bat$
-^src/terminal/parser/ft_fuzzer/run\.bat$
-^src/terminal/parser/ft_fuzzer/VTCommandFuzzer\.cpp$
-^src/terminal/parser/ft_fuzzwrapper/run\.bat$
-^src/terminal/parser/ut_parser/Base64Test.cpp$
-^src/terminal/parser/ut_parser/run\.bat$
-^src/tools/benchcat
-^src/tools/integrity/dirs$
-^src/tools/integrity/packageuwp/ConsoleUWP\.appxSources$
-^src/tools/RenderingTests/main\.cpp$
-^src/tools/texttests/fira\.txt$
-^src/tools/U8U16Test/(?!en)..\.
-^src/types/ColorFix\.cpp$
-^src/types/ut_types/UtilsTests\.cpp$
-^tools/ReleaseEngineering/ServicingPipeline\.ps1$
-^XamlStyler\.json$
-ignore$

.github/actions/spelling/expect/04cdb9b77d6827c0202f51acd4205b017015bfff.txt

@@ -1,5 +0,0 @@
-EOB
-swrapped
-wordi
-wordiswrapped
-wrappe

.github/actions/spelling/expect/README.md

@@ -1,13 +0,0 @@
-The contents of each `.txt` file in this directory are merged together.
-
-* [alphabet](alphabet.txt) is a sample for alphabet related items
-* [web](web.txt) is a sample for web/html related items
-* [expect](expect.txt) is the main list of expected items -- there is nothing
-particularly special about the file name (beyond the extension which is
-important).
-
-These terms are things which temporarily exist in the project, but which
-aren't necessarily words.
-
-If something is a word that could come and go, it probably belongs in a
-[dictionary](../dictionary/README.md).

.github/actions/spelling/expect/alphabet.txt

@@ -1,46 +0,0 @@
-AAAa
-AAAAA
-AAAAAAAAAAAAA
-AAAAAABBBBBBCCC
-AAAAABBBBBBCCC
-abcd
-abcd
-ABCDEFGHIJ
-abcdefghijk
-ABCDEFGHIJKLMNO
-abcdefghijklmnop
-ABCDEFGHIJKLMNOPQRS
-ABCDEFGHIJKLMNOPQRST
-ABCG
-ABE
-abf
-BBBBB
-BBBBBBBB
-BBBBBCCC
-BBBBCCCCC
-BBGGRR
-efg
-EFG
-efgh
-EFGh
-KLMNOQQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJ
-QQQQQQQQQQABCDEFGHIJKLMNOPQRS
-QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJPQRST
-QQQQQQQQQQABCDEFGHIJPQRSTQQQQQQQQQQ
-qrstuvwxyz
-qwerty
-qwertyuiopasdfg
-YYYYYYYDDDDDDDDDDD
-ZAAZZ
-ZABBZ
-ZBAZZ
-ZBBBZ
-ZBBZZ
-ZYXWVUT
-ZZBBZ
-ZZZBB
-ZZZBZ
-ZZZZZ

.github/actions/spelling/expect/web.txt

@@ -1,6 +0,0 @@
-winui
-appshellintegration
-mdtauk
-gfycat
-Guake
-xkcd

.github/actions/spelling/line_forbidden.patterns

@@ -1,119 +0,0 @@
-# reject `m_data` as VxWorks defined it and that breaks things if it's used elsewhere
-# see [fprime](https://github.com/nasa/fprime/commit/d589f0a25c59ea9a800d851ea84c2f5df02fb529)
-# and [Qt](https://github.com/qtproject/qt-solutions/blame/fb7bc42bfcc578ff3fa3b9ca21a41e96eb37c1c7/qtscriptclassic/src/qscriptbuffer_p.h#L46)
-# \bm_data\b
-
-# If you have a framework that uses `it()` for testing and `fit()` for debugging a specific test,
-# you might not want to check in code where you were debugging w/ `fit()`, in which case, you might want
-# to use this:
-#\bfit\(
-
-# s.b. anymore
-\bany more[,.]
-
-# s.b. GitHub
-(?<![&*.]|// |\btype )\bGithub\b(?![{)])
-
-# s.b. GitLab
-(?<![&*.]|// |\btype )\bGitlab\b(?![{)])
-
-# s.b. JavaScript
-\bJavascript\b
-
-# s.b. macOS or Mac OS X or ...
-\bMacOS\b
-
-# s.b. Microsoft
-\bMicroSoft\b
-
-# s.b. TypeScript
-\bTypescript\b
-
-# s.b. another
-\ban[- ]other\b
-
-# s.b. deprecation warning
-\b[Dd]epreciation [Ww]arnings?\b
-
-# s.b. greater than
-\bgreater then\b
-
-# s.b. in front of
-\bin from of\b
-
-# s.b. into
-# when not phrasal and when `in order to` would be wrong:
-# https://thewritepractice.com/into-vs-in-to/
-#\sin to\s(?!if\b)
-
-# s.b. is obsolete
-\bis obsolescent\b
-
-# s.b. it's or its
-\bits['’]
-
-# s.b. opt-in
-#(?<!\sfor)\sopt in\s
-
-# s.b. less than
-\bless then\b
-
-# s.b. one of
-\bon of\b
-
-# s.b. otherwise
-\bother[- ]wise\b
-
-# s.b. or (more|less)
-\bore (?:more|less)\b
-
-# s.b. nonexistent
-\bnon existing\b
-\b[Nn]o[nt][- ]existent\b
-
-# s.b. brief / details/ param / return / retval
-(?:^\s*|(?:\*|//|/*)\s+`)[\\@](?:breif|(?:detail|detials)|(?:params(?!\.)|prama?)|ret(?:uns?)|retvl)\b
-
-# s.b. preexisting
-[Pp]re[- ]existing
-
-# s.b. preempt
-[Pp]re[- ]empt\b
-
-# s.b. preemptively
-[Pp]re[- ]emptively
-
-# s.b. recently changed or recent changes
-[Rr]ecent changed
-
-# s.b. reentrancy
-[Rr]e[- ]entrancy
-
-# s.b. reentrant
-[Rr]e[- ]entrant
-
-# s.b. understand
-\bunder stand\b
-
-# s.b. workarounds
-#\bwork[- ]arounds\b
-
-# s.b. workaround
-(?:(?:[Aa]|[Tt]he|ugly)\swork[- ]around\b|\swork[- ]around\s+for)
-
-# s.b. (coarse|fine)-grained
-\b(?:coarse|fine) grained\b
-
-# s.b. neither/nor -- or reword
-#\bnot\b[^.?!"/(]+\bnor\b
-
-# probably a double negative
-# s.b. neither/nor (plus rewording the beginning)
-\bnot\b[^.?!"/]*\bneither\b[^.?!"/(]*\bnor\b
-
-# In English, it is generally wrong to have the same word twice in a row without punctuation.
-# Duplicated words are generally mistakes.
-# There are a few exceptions where it is acceptable (e.g. "that that").
-# If the highlighted doubled word pair is in a code snippet, you can write a pattern to mask it.
-# If the highlighted doubled word pair is in prose, have someone read the English before you dismiss this error.
-\s([A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})\s\g{-1}\s

.github/actions/spelling/patterns/README.md

@@ -1,12 +0,0 @@
-The contents of each `.txt` file in this directory are merged together.
-Each line is a Perl 5 regular expression.
-Nothing is guaranteed about the order in which they're merged.
--- If this is a problem, please reach out.
-
-Note: order of the contents of these files can matter.
-Lines from an individual file are handled in file order.
-Files are selected in alphabetical order.
-
-* [patterns](patterns.txt) is the main list -- there is nothing
-particularly special about the file name (beyond the extension which is
-important).

.github/actions/spelling/patterns/patterns.txt

@@ -1,160 +0,0 @@
-# See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns
-
-https?://\S+
-[Pp]ublicKeyToken="?[0-9a-fA-F]{16}"?
-(?:[{"]|UniqueIdentifier>)[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}(?:[}"]|</UniqueIdentifier)
-(?:0[Xx]|\\x|U\+|#)[a-f0-9A-FGgRr]{2,}(?!\[)[Uu]?[Ll]{0,2}\b
-microsoft/cascadia-code\@[0-9a-fA-F]{40}
-\d+x\d+Logo
-Scro\&ll
-# selectionInput.cpp
- :\\windows\\syste\b
-TestUtils::VerifyExpectedString\(tb, L"[^"]+"
-(?:hostSm|mach)\.ProcessString\(L"[^"]+"
-\b([A-Za-z])\g{-1}{3,}\b
-Base64::s_(?:En|De)code\(L"[^"]+"
-VERIFY_ARE_EQUAL\(L"[^"]+"
-"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789\+/"
-std::memory_order_[\w]+
-D2DERR_SHADER_COMPILE_FAILED
-TIL_FEATURE_[0-9A-Z_]+
-vcvars\w*
-ROY\sG\.\sBIV
-!(?:(?i)ESC)!\[
-!(?:(?i)CSI)!(?:\d+(?:;\d+|)m|[ABCDF])
-
-# SSE intrinsics like "_mm_subs_epu16"
-\b_mm(?:|256|512)_\w+\b
-
-# ARM NEON intrinsics like "vsubq_u16"
-\bv\w+_[fsu](?:8|16|32|64)\b
-
-# color floating numbers
-0x[0-9a-f](?:\.[0-9a-f]*p)[-+]\d+f
-
-# AppX package
-_\d[0-9a-z]{12}['\.]
-
-# string test
-equals_insensitive_ascii\("\w+", "\w+"
-
-# Automatically suggested patterns
-# hit-count: 3788 file-count: 599
-# IServiceProvider / isAThing
-\b(?:I|isA)(?=(?:[A-Z][a-z]{2,})+\b)
-
-# hit-count: 314 file-count: 21
-# hex runs
-\b[0-9a-fA-F]{16,}\b
-
-# hit-count: 47 file-count: 11
-# special cased printf markers
-\\r\\n(?=[a-z])|(?<!\\)\\[nrt](?=[a-z]{2,})(?=.*(?:<.*['"`]|"(?:[;,]|\);)$|\) \+$))
-
-# ConsoleArgumentsTests
---headless\\.*?"
-
-# hit-count: 109 file-count: 62
-# Compiler flags (Unix, Java/Scala)
-# Use if you have things like `-Pdocker` and want to treat them as `docker`
-(?:^|[\t ,>"'`=(])-(?:D(?=[A-Z])|[WX]|f(?=[ms]))(?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
-
-# hit-count: 60 file-count: 35
-# version suffix <word>v#
-(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
-
-# hit-count: 2 file-count: 2
-# This does not cover multiline strings, if your repository has them,
-# you'll want to remove the `(?=.*?")` suffix.
-# The `(?=.*?")` suffix should limit the false positives rate
-# printf
-%(?:s)(?!ize)(?=[a-z]{2,})
-
-# hit-count: 16 file-count: 10
-# uuid:
-\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
-
-# hit-count: 13 file-count: 4
-# Non-English
-[a-zA-Z]*[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*|[a-zA-Z]{3,}[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]|[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3,}
-
-# hit-count: 7 file-count: 5
-# hex digits including css/html color classes:
-(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|[iu]\d+)\b
-
-# hit-count: 7 file-count: 1
-# regex choice
-\(\?:[^)]+\|[^)]+\)
-
-# hit-count: 4 file-count: 4
-# tar arguments
-\b(?:\\n|)g?tar(?:\.exe|)(?:(?:\s+--[-a-zA-Z]+|\s+-[a-zA-Z]+|\s[ABGJMOPRSUWZacdfh-pr-xz]+\b)(?:=[^ ]*|))+
-
-# hit-count: 4 file-count: 1
-# ANSI color codes
-(?:\\(?:u00|x)1[Bb]|\x1b|\\u\{1[Bb]\})\[\d+(?:;\d+|)m
-
-# hit-count: 4 file-count: 1
-# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
-# grep '^[^#].*lorem' .github/actions/spelling/patterns.txt|perl -pne 's/.*i..\?://;s/\).*//' |tr '|' "\n"|sort -f |xargs -n1 ge|perl -pne 's/^[^:]*://'|sort -u|w|sed -e 's/ .*//'|w|review -
-# Warning, while `(?i)` is very neat and fancy, if you have some binary files that aren't proper unicode, you might run into:
-## Operation "substitution (s///)" returns its argument for non-Unicode code point 0x1C19AE (the code point will vary).
-## You could manually change `(?i)X...` to use `[Xx]...`
-## or you could add the files to your `excludes` file (a version after 0.0.19 should identify the file path)
-# Lorem
-(?:\w|\s|[,.])*\b(?i)(?:amet|consectetur|cursus|dolor|eros|ipsum|lacus|libero|ligula|lorem|magna|neque|nulla|suscipit|tempus)\b(?:\w|\s|[,.])*
-
-# hit-count: 3 file-count: 3
-# mailto urls
-mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
-
-# hit-count: 2 file-count: 1
-# Python string prefix / binary prefix
-# Note that there's a high false positive rate, remove the `?=` and search for the regex to see if the matches seem like reasonable strings
-(?<!')\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'(?=[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
-
-# hit-count: 1 file-count: 1
-# Punycode
-\bxn--[-0-9a-z]+
-
-# hit-count: 1 file-count: 1
-# latex (check-spelling >= 0.0.22)
-\\\w{2,}\{
-
-# hit-count: 1 file-count: 1
-# tput arguments -- https://man7.org/linux/man-pages/man5/terminfo.5.html -- technically they can be more than 5 chars long...
-\btput\s+(?:(?:-[SV]|-T\s*\w+)\s+)*\w{3,5}\b
-
-# Questionably acceptable forms of `in to`
-# Personally, I prefer `log into`, but people object
-# https://www.tprteaching.com/log-into-log-in-to-login/
-\b(?:[Ll]og|[Ss]ign) in to\b
-
-# to opt in
-\bto opt in\b
-
-# acceptable duplicates
-# ls directory listings
-[-bcdlpsw](?:[-r][-w][-Ssx]){3}\s+\d+\s+\S+\s+\S+\s+\d+\s+
-# mount
-\bmount\s+-t\s+(\w+)\s+\g{-1}\b
-# C types and repeated CSS values
-\s(auto|center|div|Guid|inherit|long|LONG|none|normal|solid|that|thin|transparent|very)(?: \g{-1})+\s
-# C struct
-\bstruct\s+(\w+)\s+\g{-1}\b
-# go templates
-\s(\w+)\s+\g{-1}\s+\`(?:graphql|inject|json|yaml):
-# doxygen / javadoc / .net
-(?:[\\@](?:brief|groupname|t?param|return|retval)|(?:public|private|\[Parameter(?:\(.+\)|)\])(?:\s+static|\s+override|\s+readonly)*)(?:\s+\{\w+\}|)\s+(\w+)\s+\g{-1}\s
-
-# Commit message -- Signed-off-by and friends
-^\s*(?:(?:Based-on-patch|Co-authored|Helped|Mentored|Reported|Reviewed|Signed-off)-by|Thanks-to): (?:[^<]*<[^>]*>|[^<]*)\s*$
-
-# Autogenerated revert commit message
-^This reverts commit [0-9a-f]{40}\.$
-
-# vtmode
---vtmode\s+(\w+)\s+\g{-1}\s
-
-# ignore long runs of a single character:
-\b([A-Za-z])\g{-1}{3,}\b

.github/actions/spelling/reject.txt

@@ -1,13 +0,0 @@
-^attache$
-^attacher$
-^attachers$
-^bellow$
-benefitting
-occurences?
-^dependan.*
-^oer$
-Sorce
-^[Ss]pae.*
-^untill$
-^untilling$
-^wether.*

.github/linters/.markdown-lint.yml

@@ -1,42 +0,0 @@
----
-###########################
-###########################
-## Markdown Linter rules ##
-###########################
-###########################
-
-# Linter rules doc:
-# - https://github.com/DavidAnson/markdownlint
-#
-# Note:
-# To comment out a single error:
-#   <!-- markdownlint-disable -->
-#   any violations you want
-#   <!-- markdownlint-restore -->
-#
-# To run the linter locally:
-# 1. install the npm package:
-#    `npm install -g markdownlint-cli`
-# 2. Then run it in the root of the repo with
-#    `markdownlint -c .github\linters\.markdown-lint.yml ./*.md`
-
-###############
-# Rules by id #
-###############
-MD004: false                  # Unordered list style
-MD007:
-  indent: 2                   # Unordered list indentation
-MD013:
-  line_length: 400            # Line length 80 is far to short
-MD024: false                  # Allow multiple headings with same content
-MD026:
-  punctuation: ".,;:!。，；:"  # List of not allowed
-MD029: false                  # Ordered list item prefix
-MD033: false                  # Allow inline HTML
-MD036: false                  # Emphasis used instead of a heading
-MD040: false                  # Allow ``` blocks in md files with no language specified
-
-#################
-# Rules by tags #
-#################
-blank_lines: false  # Error on blank lines

.github/policies/resourceManagement.yml

@@ -1,751 +0,0 @@
-id: 
-name: GitOps.PullRequestIssueManagement
-description: GitOps.PullRequestIssueManagement primitive
-owner: 
-resource: repository
-disabled: false
-where: 
-configuration:
-  resourceManagementConfiguration:
-    scheduledSearches:
-    - description: 
-      frequencies:
-      - hourly:
-          hour: 3
-      filters:
-      - isIssue
-      - isOpen
-      - hasLabel:
-          label: Needs-Author-Feedback
-      - hasLabel:
-          label: No-Recent-Activity
-      - noActivitySince:
-          days: 3
-      actions:
-      - closeIssue
-    - description: 
-      frequencies:
-      - hourly:
-          hour: 3
-      filters:
-      - isIssue
-      - isOpen
-      - hasLabel:
-          label: Needs-Author-Feedback
-      - noActivitySince:
-          days: 4
-      - isNotLabeledWith:
-          label: No-Recent-Activity
-      actions:
-      - addLabel:
-          label: No-Recent-Activity
-      - addReply:
-          reply: This issue has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **4 days**. It will be closed if no further activity occurs **within 3 days of this comment**.
-    - description: 
-      frequencies:
-      - hourly:
-          hour: 3
-      filters:
-      - isIssue
-      - isOpen
-      - hasLabel:
-          label: Resolution-Duplicate
-      - noActivitySince:
-          days: 1
-      actions:
-      - addReply:
-          reply: This issue has been marked as duplicate and has not had any activity for **1 day**. It will be closed for housekeeping purposes.
-      - closeIssue
-    - description: 
-      frequencies:
-      - hourly:
-          hour: 3
-      filters:
-      - isPullRequest
-      - isOpen
-      - hasLabel:
-          label: Needs-Author-Feedback
-      - hasLabel:
-          label: No-Recent-Activity
-      - noActivitySince:
-          days: 7
-      actions:
-      - closeIssue
-    - description: 
-      frequencies:
-      - hourly:
-          hour: 3
-      filters:
-      - isPullRequest
-      - isOpen
-      - hasLabel:
-          label: Needs-Author-Feedback
-      - noActivitySince:
-          days: 7
-      - isNotLabeledWith:
-          label: No-Recent-Activity
-      actions:
-      - addLabel:
-          label: No-Recent-Activity
-      - addReply:
-          reply: This pull request has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **7 days**. It will be closed if no further activity occurs **within 7 days of this comment**.
-    eventResponderTasks:
-    - if:
-      - payloadType: Issues
-      - or:
-        - and:
-          - isAction:
-              action: Opened
-          - not:
-              hasLabel:
-                label: ⛺ Reserved
-      then:
-      - addLabel:
-          label: Needs-Triage
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - isAction:
-          action: Created
-      - isActivitySender:
-          issueAuthor: True
-      - hasLabel:
-          label: Needs-Author-Feedback
-      then:
-      - addLabel:
-          label: Needs-Attention
-      - removeLabel:
-          label: Needs-Author-Feedback
-      description: 
-    - if:
-      - payloadType: Issues
-      - not:
-          isAction:
-            action: Closed
-      - hasLabel:
-          label: No-Recent-Activity
-      then:
-      - removeLabel:
-          label: No-Recent-Activity
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - hasLabel:
-          label: No-Recent-Activity
-      then:
-      - removeLabel:
-          label: No-Recent-Activity
-      description: 
-    - if:
-      - payloadType: Pull_Request_Review
-      - isAction:
-          action: Submitted
-      - isReviewState:
-          reviewState: Changes_requested
-      then:
-      - addLabel:
-          label: Needs-Author-Feedback
-      description: 
-    - if:
-      - payloadType: Pull_Request
-      - isActivitySender:
-          issueAuthor: True
-      - not:
-          isAction:
-            action: Closed
-      - hasLabel:
-          label: Needs-Author-Feedback
-      then:
-      - removeLabel:
-          label: Needs-Author-Feedback
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - isActivitySender:
-          issueAuthor: True
-      - hasLabel:
-          label: Needs-Author-Feedback
-      then:
-      - removeLabel:
-          label: Needs-Author-Feedback
-      description: 
-    - if:
-      - payloadType: Pull_Request_Review
-      - isActivitySender:
-          issueAuthor: True
-      - hasLabel:
-          label: Needs-Author-Feedback
-      then:
-      - removeLabel:
-          label: Needs-Author-Feedback
-      description: 
-    - if:
-      - payloadType: Pull_Request
-      - not:
-          isAction:
-            action: Closed
-      - hasLabel:
-          label: No-Recent-Activity
-      then:
-      - removeLabel:
-          label: No-Recent-Activity
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - hasLabel:
-          label: No-Recent-Activity
-      then:
-      - removeLabel:
-          label: No-Recent-Activity
-      description: 
-    - if:
-      - payloadType: Pull_Request_Review
-      - hasLabel:
-          label: No-Recent-Activity
-      then:
-      - removeLabel:
-          label: No-Recent-Activity
-      description: 
-    - if:
-      - payloadType: Pull_Request
-      - hasLabel:
-          label: AutoMerge
-      then:
-      - enableAutoMerge:
-          mergeMethod: Squash
-      description: 
-    - if:
-      - payloadType: Pull_Request
-      - labelRemoved:
-          label: AutoMerge
-      then:
-      - disableAutoMerge
-      description: 
-    - if:
-      - payloadType: Issues
-      - or:
-        - and:
-          - isLabeled
-          - hasLabel:
-              label: Mass-Chaos
-        - isOpen
-        - isLabeled
-      - not:
-          hasLabel:
-            label: Needs-Tag-Fix
-      - or:
-        - and:
-          - not:
-              hasLabel:
-                label: Area-Accessibility
-          - not:
-              hasLabel:
-                label: Area-Build
-          - not:
-              hasLabel:
-                label: Area-Extensibility
-          - not:
-              hasLabel:
-                label: Area-Fonts
-          - not:
-              hasLabel:
-                label: Area-Input
-          - not:
-              hasLabel:
-                label: Area-Interaction
-          - not:
-              hasLabel:
-                label: Area-Interop
-          - not:
-              hasLabel:
-                label: Area-Output
-          - not:
-              hasLabel:
-                label: Area-Performance
-          - not:
-              hasLabel:
-                label: Area-Rendering
-          - not:
-              hasLabel:
-                label: Area-Server
-          - not:
-              hasLabel:
-                label: Area-Settings
-          - not:
-              hasLabel:
-                label: Area-TerminalConnection
-          - not:
-              hasLabel:
-                label: Area-TerminalControl
-          - not:
-              hasLabel:
-                label: Area-User Interface
-          - not:
-              hasLabel:
-                label: Area-VT
-          - not:
-              hasLabel:
-                label: Area-CodeHealth
-          - not:
-              hasLabel:
-                label: Area-Quality
-          - not:
-              hasLabel:
-                label: Area-AzureShell
-          - not:
-              hasLabel:
-                label: Area-Schema
-          - not:
-              hasLabel:
-                label: Area-Commandline
-          - not:
-              hasLabel:
-                label: Area-ShellExtension
-          - not:
-              hasLabel:
-                label: Area-WPFControl
-          - not:
-              hasLabel:
-                label: Area-Settings UI
-          - not:
-              hasLabel:
-                label: Area-DefApp
-          - not:
-              hasLabel:
-                label: Area-Remoting
-          - not:
-              hasLabel:
-                label: Area-Windowing
-          - not:
-              hasLabel:
-                label: Area-Theming
-          - not:
-              hasLabel:
-                label: Area-Localization
-        - and:
-          - not:
-              hasLabel:
-                label: Issue-Bug
-          - not:
-              hasLabel:
-                label: Issue-Docs
-          - not:
-              hasLabel:
-                label: Issue-Feature
-          - not:
-              hasLabel:
-                label: Issue-Question
-          - not:
-              hasLabel:
-                label: Issue-Samples
-          - not:
-              hasLabel:
-                label: Issue-Task
-          - not:
-              hasLabel:
-                label: Issue-Scenario
-        - and:
-          - not:
-              hasLabel:
-                label: Product-Cmd.exe
-          - not:
-              hasLabel:
-                label: Product-Colortool
-          - not:
-              hasLabel:
-                label: Product-Conhost
-          - not:
-              hasLabel:
-                label: Product-Conpty
-          - not:
-              hasLabel:
-                label: Product-Meta
-          - not:
-              hasLabel:
-                label: Product-Powershell
-          - not:
-              hasLabel:
-                label: Product-Terminal
-          - not:
-              hasLabel:
-                label: Product-WSL
-        - and:
-          - not: isOpen
-          - and:
-            - not:
-                hasLabel:
-                  label: Resolution-Answered
-            - not:
-                hasLabel:
-                  label: Resolution-By-Design
-            - not:
-                hasLabel:
-                  label: Resolution-Duplicate
-            - not:
-                hasLabel:
-                  label: Resolution-External
-            - not:
-                hasLabel:
-                  label: Resolution-Fix-Available
-            - not:
-                hasLabel:
-                  label: Resolution-Fix-Committed
-            - not:
-                hasLabel:
-                  label: Resolution-Won't-Fix
-      - not:
-          hasLabel:
-            label: Needs-Triage
-      - not:
-          hasLabel:
-            label: Resolution-Duplicate
-      - not:
-          hasLabel:
-            label: ⛺ Reserved
-      - not:
-          hasLabel:
-            label: Tracking-External
-      then:
-      - addLabel:
-          label: Needs-Tag-Fix
-      description: 
-    - if:
-      - payloadType: Issues
-      - and:
-        - isLabeled
-        - hasLabel:
-            label: Needs-Tag-Fix
-      - and:
-        - or:
-          - hasLabel:
-              label: Area-Accessibility
-          - hasLabel:
-              label: Area-Build
-          - hasLabel:
-              label: Area-Extensibility
-          - hasLabel:
-              label: Area-Fonts
-          - hasLabel:
-              label: Area-Input
-          - hasLabel:
-              label: Area-Interaction
-          - hasLabel:
-              label: Area-Interop
-          - hasLabel:
-              label: Area-Output
-          - hasLabel:
-              label: Area-Performance
-          - hasLabel:
-              label: Area-Rendering
-          - hasLabel:
-              label: Area-Server
-          - hasLabel:
-              label: Area-Settings
-          - hasLabel:
-              label: Area-TerminalConnection
-          - hasLabel:
-              label: Area-TerminalControl
-          - hasLabel:
-              label: Area-User Interface
-          - hasLabel:
-              label: Area-VT
-          - hasLabel:
-              label: Area-CodeHealth
-          - hasLabel:
-              label: Area-Quality
-          - hasLabel:
-              label: Area-Schema
-          - hasLabel:
-              label: Area-AzureShell
-          - hasLabel:
-              label: Area-Commandline
-          - hasLabel:
-              label: Area-ShellExtension
-          - hasLabel:
-              label: Area-WPFControl
-          - hasLabel:
-              label: Area-Settings UI
-          - hasLabel:
-              label: Area-DefApp
-          - hasLabel:
-              label: Area-Localization
-          - hasLabel:
-              label: Area-Windowing
-          - hasLabel:
-              label: Area-Theming
-          - hasLabel:
-              label: Area-AtlasEngine
-          - hasLabel:
-              label: Area-CmdPal
-        - or:
-          - hasLabel:
-              label: Issue-Bug
-          - hasLabel:
-              label: Issue-Docs
-          - hasLabel:
-              label: Issue-Feature
-          - hasLabel:
-              label: Issue-Question
-          - hasLabel:
-              label: Issue-Samples
-          - hasLabel:
-              label: Issue-Task
-          - hasLabel:
-              label: Issue-Scenario
-        - or:
-          - hasLabel:
-              label: Product-Cmd.exe
-          - hasLabel:
-              label: Product-Colortool
-          - hasLabel:
-              label: Product-Conhost
-          - hasLabel:
-              label: Product-Conpty
-          - hasLabel:
-              label: Product-Meta
-          - hasLabel:
-              label: Product-Powershell
-          - hasLabel:
-              label: Product-Terminal
-          - hasLabel:
-              label: Product-WSL
-        - or:
-          - isOpen
-          - and:
-            - not: isOpen
-            - or:
-              - hasLabel:
-                  label: Resolution-Answered
-              - hasLabel:
-                  label: Resolution-By-Design
-              - hasLabel:
-                  label: Resolution-Duplicate
-              - hasLabel:
-                  label: Resolution-External
-              - hasLabel:
-                  label: Resolution-Fix-Available
-              - hasLabel:
-                  label: Resolution-Fix-Committed
-              - hasLabel:
-                  label: Resolution-Won't-Fix
-              - hasLabel:
-                  label: Tracking-External
-      then:
-      - removeLabel:
-          label: Needs-Tag-Fix
-      description: 
-    - if:
-      - payloadType: Pull_Request
-      then:
-      - inPrLabel:
-          label: In-PR
-      description: 
-    - if:
-      - payloadType: Issues
-      - hasLabel:
-          label: Needs-Tag-Fix
-      - hasLabel:
-          label: Resolution-Duplicate
-      then:
-      - removeLabel:
-          label: Needs-Tag-Fix
-      description: 
-    - if:
-      - payloadType: Issues
-      - or:
-        - titleContains:
-            pattern: ^\s*Bug Report \(IF I DO NOT CHANGE THIS THE ISSUE WILL BE AUTO-CLOSED\)\s*$
-            isRegex: True
-        - titleContains:
-            pattern: ^\s*Bug Report\s*$
-            isRegex: True
-      - or:
-        - isAction:
-            action: Opened
-        - isAction:
-            action: Reopened
-      - not:
-          activitySenderHasPermission:
-            permission: Write
-      - not:
-          activitySenderHasPermission:
-            permission: Admin
-      then:
-      - closeIssue
-      - addLabel:
-          label: Needs-Author-Feedback
-      - addReply:
-          reply: Hi! Thanks for attempting to open an issue. Unfortunately, your title wasn't changed from the original template which makes it very hard for us to track and triage. You are welcome to fix up the title and try again with a new issue.
-      description: 
-    - if:
-      - payloadType: Issues
-      - or:
-        - isAction:
-            action: Opened
-        - isAction:
-            action: Reopened
-      - or:
-        - not:
-            bodyContains:
-              pattern: .+
-              isRegex: True
-      then:
-      - closeIssue
-      - addLabel:
-          label: Needs-Author-Feedback
-      - addReply:
-          reply: "Hi! Thanks for attempting to open an issue. Unfortunately, you didn't write anything in the body which makes it impossible to understand your concern. You are welcome to fix up the issue and try again by opening another issue with the body filled out. "
-      description: 
-    - if:
-      - payloadType: Pull_Request
-      - isLabeled
-      - hasLabel:
-          label: Needs-Second
-      - isOpen
-      then:
-      - requestReview:
-          reviewer: zadjii-msft
-      - requestReview:
-          reviewer: PankajBhojwani
-      - requestReview:
-          reviewer: carlos-zamora
-      - requestReview:
-          reviewer: dhowett
-      - requestReview:
-          reviewer: lhecker
-      description: 
-    - if:
-      - payloadType: Pull_Request_Review
-      - not: isOpen
-      - hasLabel:
-          label: Needs-Second
-      then:
-      - removeLabel:
-          label: Needs-Second
-      description: 
-    - if:
-      - payloadType: Issues
-      - hasLabel:
-          label: In-PR
-      - hasLabel:
-          label: Help Wanted
-      - isLabeled
-      then:
-      - removeLabel:
-          label: Help-Wanted
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - commentContains:
-          pattern: '\/dup(licate|e)?(\s+of)?\s+\#[\d]+'
-          isRegex: True
-      - or:
-        - activitySenderHasPermission:
-            permission: Admin
-        - activitySenderHasPermission:
-            permission: Write
-      then:
-      - addReply:
-          reply: Hi! We've identified this issue as a duplicate of another one that already exists on this Issue Tracker. This specific instance is being closed in favor of tracking the concern over on the referenced thread. Thanks for your report!
-      - closeIssue
-      - removeLabel:
-          label: Needs-Triage
-      - addLabel:
-          label: Resolution-Duplicate
-      - removeLabel:
-          label: Needs-Tag-Fix
-      - removeLabel:
-          label: Needs-Attention
-      - removeLabel:
-          label: Needs-Author-Feedback
-      - removeLabel:
-          label: Needs-Repro
-      - removeLabel:
-          label: Needs-Second
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - commentContains:
-          pattern: '\/feedback'
-          isRegex: True
-      - or:
-        - activitySenderHasPermission:
-            permission: Admin
-        - activitySenderHasPermission:
-            permission: Write
-      then:
-      - addReply:
-          reply: >2-
-
-            Hi there!<br><br>Can you please send us feedback with the [Feedback Hub](https://support.microsoft.com/en-us/windows/send-feedback-to-microsoft-with-the-feedback-hub-app-f59187f8-8739-22d6-ba93-f66612949332) with this issue? Make sure to click the "Start recording" button, then reproduce the issue before submitting the feedback. Once it's submitted, paste the link here so we can more easily find your crash information on the back end?<br><br>Thanks!<br><br>![image](https://user-images.githubusercontent.com/18356694/140811502-a068f78b-89d2-4587-925a-73e19652b830.png)<br><br>![image](https://user-images.githubusercontent.com/18356694/140811557-cdc22a0f-fa6a-4f6a-953e-73b51f5548a3.png)<br><br>![image](https://user-images.githubusercontent.com/18221333/62478649-6de55400-b760-11e9-806e-5aab7e085a9f.png)
-      - addLabel:
-          label: Needs-Author-Feedback
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      then:
-      - cleanEmailReply
-      description: 
-    - if:
-      - payloadType: Pull_Request
-      then:
-      - labelSync:
-          pattern: Issue-
-      - labelSync:
-          pattern: Area-
-      - labelSync:
-          pattern: Priority-
-      - labelSync:
-          pattern: Product-
-      - labelSync:
-          pattern: Severity-
-      - labelSync:
-          pattern: Impact-
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - commentContains:
-          pattern: '\/dup(licate|e)?(\s+of)?\s+https'
-          isRegex: True
-      - or:
-        - activitySenderHasPermission:
-            permission: Admin
-        - activitySenderHasPermission:
-            permission: Write
-      then:
-      - addReply:
-          reply: Hi! We've identified this issue as a duplicate of one that exists on somebody else's Issue Tracker. Please make sure you subscribe to the referenced external issue for future updates. Thanks for your report!
-      - closeIssue
-      - removeLabel:
-          label: Needs-Triage
-      - addLabel:
-          label: Resolution-External
-      - removeLabel:
-          label: Needs-Attention
-      - removeLabel:
-          label: Needs-Author-Feedback
-      - removeLabel:
-          label: Needs-Bisect
-      - removeLabel:
-          label: Needs-Repro
-      - removeLabel:
-          label: Needs-Second
-      description: 
-    - if:
-      - payloadType: Issue_Comment
-      - commentContains:
-          pattern: /?
-          isRegex: False
-      - or:
-        - activitySenderHasPermission:
-            permission: Admin
-        - activitySenderHasPermission:
-            permission: Write
-      then:
-      - removeLabel:
-          label: Needs-Attention
-      - addLabel:
-          label: Needs-Author-Feedback
-      description: 
-onFailure: 
-onSuccess: 

.github/workflows/addToProject.yml

@@ -1,21 +0,0 @@
-name: Add triaged bugs & tasks to project board
-# https://github.com/actions/add-to-project
-
-on:
-  issues:
-    types:
-      - labeled
-      - unlabeled
-
-permissions: {}
-jobs:
-  add-to-project:
-    name: Add issue to project
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/add-to-project@v0.5.0
-        with:
-          project-url: https://github.com/orgs/microsoft/projects/159
-          github-token: ${{ secrets.ADD_TO_PROJECT_PAT }}
-          labeled: Issue-Feature, Needs-Triage, Needs-Author-Feedback, Issue-Scenario
-          label-operator: NOT

.github/workflows/similarIssues.yml

@@ -1,32 +0,0 @@
-name: GitGudSimilarIssues comments
-
-on:
-  issues:
-    types: [opened]
-
-jobs:
-  getSimilarIssues:
-    runs-on: ubuntu-latest
-    outputs:
-      message: ${{ steps.getBody.outputs.message }}
-    steps:
-      - id: getBody
-        uses: craigloewen-msft/GitGudSimilarIssues@main
-        with:
-          issuetitle: ${{ github.event.issue.title }}
-          repo: ${{ github.repository }}
-          similaritytolerance: "0.75"
-  add-comment:
-    needs: getSimilarIssues
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write
-    if: needs.getSimilarIssues.outputs.message != ''
-    steps:
-      - name: Add comment
-        run: gh issue comment "$NUMBER" --repo "$REPO" --body "$BODY"
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          NUMBER: ${{ github.event.issue.number }}
-          REPO: ${{ github.repository }}
-          BODY: ${{ needs.getSimilarIssues.outputs.message }}

.github/workflows/spelling2.yml

@@ -1,197 +0,0 @@
-# spelling.yml is blocked per https://github.com/check-spelling/check-spelling/security/advisories/GHSA-g86g-chm8-7r2p
-name: Spell checking
-
-# Comment management is handled through a secondary job, for details see:
-# https://github.com/check-spelling/check-spelling/wiki/Feature%3A-Restricted-Permissions
-#
-# `jobs.comment-push` runs when a push is made to a repository and the `jobs.spelling` job needs to make a comment
-#   (in odd cases, it might actually run just to collapse a comment, but that's fairly rare)
-#   it needs `contents: write` in order to add a comment.
-#
-# `jobs.comment-pr` runs when a pull_request is made to a repository and the `jobs.spelling` job needs to make a comment
-#   or collapse a comment (in the case where it had previously made a comment and now no longer needs to show a comment)
-#   it needs `pull-requests: write` in order to manipulate those comments.
-
-# Updating pull request branches is managed via comment handling.
-# For details, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Update-expect-list
-#
-# These elements work together to make it happen:
-#
-# `on.issue_comment`
-#   This event listens to comments by users asking to update the metadata.
-#
-# `jobs.update`
-#   This job runs in response to an issue_comment and will push a new commit
-#   to update the spelling metadata.
-#
-# `with.experimental_apply_changes_via_bot`
-#   Tells the action to support and generate messages that enable it
-#   to make a commit to update the spelling metadata.
-#
-# `with.ssh_key`
-#   In order to trigger workflows when the commit is made, you can provide a
-#   secret (typically, a write-enabled github deploy key).
-#
-#   For background, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Update-with-deploy-key
-
-# Sarif reporting
-#
-# Access to Sarif reports is generally restricted (by GitHub) to members of the repository.
-#
-# Requires enabling `security-events: write`
-# and configuring the action with `use_sarif: 1`
-#
-#   For information on the feature, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Sarif-output
-
-# Minimal workflow structure:
-#
-# on:
-#   push:
-#     ...
-#   pull_request_target:
-#     ...
-# jobs:
-#   # you only want the spelling job, all others should be omitted
-#   spelling:
-#     # remove `security-events: write` and `use_sarif: 1`
-#     # remove `experimental_apply_changes_via_bot: 1`
-#     ... otherwise adjust the `with:` as you wish
-
-on:
-  push:
-    branches:
-    - "**"
-    tags-ignore:
-    - "**"
-  pull_request_target:
-    branches:
-    - "**"
-    types:
-    - 'opened'
-    - 'reopened'
-    - 'synchronize'
-  issue_comment:
-    types:
-    - 'created'
-
-jobs:
-  spelling:
-    name: Spell checking
-    permissions:
-      contents: read
-      pull-requests: read
-      actions: read
-      security-events: write
-    outputs:
-      followup: ${{ steps.spelling.outputs.followup }}
-    runs-on: ubuntu-latest
-    if: ${{ contains(github.event_name, 'pull_request') || github.event_name == 'push' }}
-    concurrency:
-      group: spelling-${{ github.event.pull_request.number || github.ref }}
-      # note: If you use only_check_changed_files, you do not want cancel-in-progress
-      cancel-in-progress: true
-    steps:
-    - name: check-spelling
-      id: spelling
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        suppress_push_for_open_pull_request: ${{ github.actor != 'dependabot[bot]' && 1 }}
-        checkout: true
-        check_file_names: 1
-        spell_check_this: microsoft/terminal@main
-        post_comment: 0
-        use_magic_file: 1
-        report-timing: 1
-        warnings: bad-regex,binary-file,deprecated-feature,ignored-expect-variant,large-file,limited-references,no-newline-at-eof,noisy-file,non-alpha-in-dictionary,token-is-substring,unexpected-line-ending,whitespace-in-dictionary,minified-file,unsupported-configuration,no-files-to-check
-        experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
-        use_sarif: ${{ (!github.event.pull_request || (github.event.pull_request.head.repo.full_name == github.repository)) && 1 }}
-        extra_dictionary_limit: 20
-        extra_dictionaries:
-          cspell:software-terms/dict/softwareTerms.txt
-          cspell:cpp/src/stdlib-cpp.txt
-          cspell:lorem-ipsum/dictionary.txt
-          cspell:cpp/src/stdlib-c.txt
-          cspell:php/dict/php.txt
-          cspell:filetypes/filetypes.txt
-          cspell:java/src/java.txt
-          cspell:python/src/common/extra.txt
-          cspell:node/dict/node.txt
-          cspell:java/src/java-terms.txt
-          cspell:aws/aws.txt
-          cspell:typescript/dict/typescript.txt
-          cspell:dotnet/dict/dotnet.txt
-          cspell:golang/dict/go.txt
-          cspell:fullstack/dict/fullstack.txt
-          cspell:cpp/src/compiler-msvc.txt
-          cspell:python/src/python/python-lib.txt
-          cspell:mnemonics/src/mnemonics.txt
-          cspell:cpp/src/stdlib-cmath.txt
-          cspell:css/dict/css.txt
-          cspell:cpp/src/lang-keywords.txt
-          cspell:django/dict/django.txt
-          cspell:python/src/python/python.txt
-          cspell:html/dict/html.txt
-          cspell:cpp/src/ecosystem.txt
-          cspell:cpp/src/compiler-clang-attributes.txt
-          cspell:npm/dict/npm.txt
-          cspell:r/src/r.txt
-          cspell:powershell/dict/powershell.txt
-          cspell:csharp/csharp.txt
-
-  comment-push:
-    name: Report (Push)
-    # If your workflow isn't running on push, you can remove this job
-    runs-on: ubuntu-latest
-    needs: spelling
-    permissions:
-      contents: write
-    if: (success() || failure()) && needs.spelling.outputs.followup && github.event_name == 'push'
-    steps:
-    - name: comment
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        checkout: true
-        spell_check_this: microsoft/terminal@main
-        task: ${{ needs.spelling.outputs.followup }}
-
-  comment-pr:
-    name: Report (PR)
-    # If you workflow isn't running on pull_request*, you can remove this job
-    runs-on: ubuntu-latest
-    needs: spelling
-    permissions:
-      contents: read
-      pull-requests: write
-    if: (success() || failure()) && needs.spelling.outputs.followup && contains(github.event_name, 'pull_request')
-    steps:
-    - name: comment
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        checkout: true
-        spell_check_this: microsoft/terminal@main
-        task: ${{ needs.spelling.outputs.followup }}
-        experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
-
-  update:
-    name: Update PR
-    permissions:
-      contents: write
-      pull-requests: write
-      actions: read
-    runs-on: ubuntu-latest
-    if: ${{
-        github.repository_owner != 'microsoft' &&
-        github.event_name == 'issue_comment' &&
-        github.event.issue.pull_request &&
-        contains(github.event.comment.body, '@check-spelling-bot apply')
-      }}
-    concurrency:
-      group: spelling-update-${{ github.event.issue.number }}
-      cancel-in-progress: false
-    steps:
-    - name: apply spelling updates
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
-        checkout: true
-        ssh_key: "${{ secrets.CHECK_SPELLING }}"

.github/workflows/winget.yml

@@ -1,24 +0,0 @@
-name: Publish to Winget
-
-on:
-  release:
-    types: [published]
-
-env:
-  REGEX: 'Microsoft\.WindowsTerminal(?:Preview)?_([\d.]+)_8wekyb3d8bbwe\.msixbundle$'
-
-jobs:
-  publish:
-    runs-on: windows-latest # Action can only run on Windows
-    steps:
-      - name: Publish Windows Terminal ${{ github.event.release.prerelease && 'Preview' || 'Stable' }}
-        run: |
-          $assets = '${{ toJSON(github.event.release.assets) }}' | ConvertFrom-Json
-          $wingetRelevantAsset = $assets | Where-Object { $_.name -like '*.msixbundle' } | Select-Object -First 1
-          $regex = [Regex]::New($env:REGEX)
-          $version = $regex.Match($wingetRelevantAsset.name).Groups[1].Value
-
-          $wingetPackage = "Microsoft.WindowsTerminal${{ github.event.release.prerelease && '.Preview' || '' }}"
-
-          & curl.exe -JLO https://aka.ms/wingetcreate/latest
-          & .\wingetcreate.exe update $wingetPackage -s -v $version -u $wingetRelevantAsset.browser_download_url -t "${{ secrets.WINGET_TOKEN }}"

.gitignore

@@ -48,7 +48,6 @@ dlldata.c
 project.lock.json
 artifacts/
 
-*_h.h
 *_i.c
 *_p.c
 *_i.h
@@ -145,13 +144,13 @@ publish/
 # Publish Web Output
 *.[Pp]ublish.xml
 *.azurePubxml
-# TODO: Comment the next line if you want to check in your web deploy settings
+# TODO: Comment the next line if you want to checkin your web deploy settings
 # but database connection strings (with potential passwords) will be unencrypted
 *.pubxml
 *.publishproj
 
 # Microsoft Azure Web App publish settings. Comment the next line if you want to
-# check in your Azure Web App publish settings, but sensitive information contained
+# checkin your Azure Web App publish settings, but sensitive information contained
 # in these scripts will be unencrypted
 PublishScripts/
 

.gitmodules

@@ -1,3 +1,6 @@
 [submodule "dep/gsl"]
 	path = dep/gsl
 	url = https://github.com/microsoft/gsl
+[submodule "dep/wil"]
+	path = dep/wil
+	url = https://github.com/microsoft/wil

.nuget/packages.config

@@ -1,4 +1,4 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
   <package id="vswhere" version="2.6.7" />
-</packages>
+</packages>

.vscode/extensions.json

@@ -1,13 +0,0 @@
-{
-    // See https://go.microsoft.com/fwlink/?LinkId=827846 to learn about workspace recommendations.
-    // Extension identifier format: ${publisher}.${name}. Example: vscode.csharp
-
-    // List of extensions which should be recommended for users of this workspace.
-    "recommendations": [
-        "ms-vscode.cpptools"
-    ],
-    // List of extensions recommended by VS Code that should not be recommended for users of this workspace.
-    "unwantedRecommendations": [
-        
-    ]
-}

.vscode/launch.json

@@ -1,24 +0,0 @@
-{
-    // Use IntelliSense to learn about possible attributes.
-    // Hover to view descriptions of existing attributes.
-    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "name": "Debug OpenConsole by Launching (x64, debug)",
-            "type": "cppvsdbg",
-            "request": "launch",
-            "program": "${workspaceFolder}\\bin\\x64\\debug\\openconsole.exe",
-            "args": [],
-            "stopAtEntry": false,
-            "cwd": "${workspaceFolder}",
-            "environment": [],
-        },
-        {
-            "name": "Debug Terminal by Attaching (You go build/register/launch it first.)",
-            "type": "cppvsdbg",
-            "request": "attach",
-            "processId": "${command:pickProcess}"
-        }
-    ]
-}

.vscode/settings.json

@@ -1,111 +0,0 @@
-{
-    "C_Cpp.default.browse.databaseFilename": "${workspaceFolder}\\.vscode\\.BROWSE.VC.DB",
-    "C_Cpp.default.browse.path": [
-        "${workspaceFolder}"
-    ],
-    "C_Cpp.loggingLevel": "None",
-    "files.associations": {
-        "xstring": "cpp",
-        "*.idl": "midl3",
-        "array": "cpp",
-        "future": "cpp",
-        "istream": "cpp",
-        "memory": "cpp",
-        "tuple": "cpp",
-        "type_traits": "cpp",
-        "utility": "cpp",
-        "variant": "cpp",
-        "xlocmes": "cpp",
-        "xlocmon": "cpp",
-        "xlocnum": "cpp",
-        "xloctime": "cpp",
-        "multi_span": "cpp",
-        "pointers": "cpp",
-        "vector": "cpp",
-        "bitset": "cpp",
-        "deque": "cpp",
-        "initializer_list": "cpp",
-        "list": "cpp",
-        "queue": "cpp",
-        "random": "cpp",
-        "regex": "cpp",
-        "stack": "cpp",
-        "xhash": "cpp",
-        "xtree": "cpp",
-        "xutility": "cpp",
-        "span": "cpp",
-        "string_span": "cpp",
-        "algorithm": "cpp",
-        "atomic": "cpp",
-        "bit": "cpp",
-        "cctype": "cpp",
-        "charconv": "cpp",
-        "chrono": "cpp",
-        "clocale": "cpp",
-        "cmath": "cpp",
-        "compare": "cpp",
-        "complex": "cpp",
-        "concepts": "cpp",
-        "condition_variable": "cpp",
-        "cstdarg": "cpp",
-        "cstddef": "cpp",
-        "cstdint": "cpp",
-        "cstdio": "cpp",
-        "cstdlib": "cpp",
-        "cstring": "cpp",
-        "ctime": "cpp",
-        "cwchar": "cpp",
-        "cwctype": "cpp",
-        "exception": "cpp",
-        "filesystem": "cpp",
-        "fstream": "cpp",
-        "functional": "cpp",
-        "iomanip": "cpp",
-        "ios": "cpp",
-        "iosfwd": "cpp",
-        "iostream": "cpp",
-        "iterator": "cpp",
-        "limits": "cpp",
-        "locale": "cpp",
-        "map": "cpp",
-        "memory_resource": "cpp",
-        "mutex": "cpp",
-        "new": "cpp",
-        "numeric": "cpp",
-        "optional": "cpp",
-        "ostream": "cpp",
-        "ratio": "cpp",
-        "set": "cpp",
-        "shared_mutex": "cpp",
-        "sstream": "cpp",
-        "stdexcept": "cpp",
-        "stop_token": "cpp",
-        "streambuf": "cpp",
-        "string": "cpp",
-        "system_error": "cpp",
-        "thread": "cpp",
-        "typeinfo": "cpp",
-        "unordered_map": "cpp",
-        "unordered_set": "cpp",
-        "xfacet": "cpp",
-        "xiosbase": "cpp",
-        "xlocale": "cpp",
-        "xlocbuf": "cpp",
-        "xlocinfo": "cpp",
-        "xmemory": "cpp",
-        "xstddef": "cpp",
-        "xtr1common": "cpp",
-        "coroutine": "cpp",
-        "format": "cpp",
-        "forward_list": "cpp",
-        "latch": "cpp"
-    },
-    "files.exclude": {
-        "**/bin/**": true,
-        "**/obj/**": true,
-        "**/Generated Files/**": true
-    },
-    "search.exclude": {
-        "**/packages/**": true
-    }
-}

.vscode/tasks.json

@@ -1,121 +0,0 @@
-{
-    "version": "2.0.0",
-    "tasks": [
-        {
-            "type": "process",
-            "label": "Build Terminal/Console",
-            "command": "powershell.exe",
-            "args": [
-              "-Command",
-              "Import-Module ${workspaceFolder}\\tools\\OpenConsole.psm1;",
-              "Set-MsBuildDevEnvironment;",
-              "$project = switch(\"${input:buildProjectChoice}\"){OpenConsole{\"Conhost\\Host_EXE\"} Terminal{\"Terminal\\CascadiaPackage\"}  TermControl{\"Terminal\\TerminalControl\"}};",
-              "$target = switch(\"${input:buildModeChoice}\"){Build{\"\"} Rebuild{\":Rebuild\"} Clean{\":Clean\"}};",
-              "$target = $project + $target;",
-              "msbuild",
-              "${workspaceFolder}\\OpenConsole.sln",
-              "/p:Configuration=${input:configChoice}",
-              "/p:Platform=${input:platformChoice}",
-              "/p:AppxSymbolPackageEnabled=false", // This takes a long time, so false if we don't really need it.
-              "/t:$target",
-              "/m", // Parallel builds
-              "/verbosity:minimal"
-            ],
-            "problemMatcher": ["$msCompile"],
-            "group": {
-              "kind": "build",
-              "isDefault": true
-            },
-            "runOptions": {
-                "reevaluateOnRerun": false,
-                "instanceLimit": 1,
-                "runOn": "default"
-            }
-        },
-        {
-            "type": "process",
-            "label": "Register Windows Terminal x64 Debug",
-            "command": "powershell.exe",
-            "args": [
-              "-Command",
-              "Import-Module ${workspaceFolder}\\tools\\OpenConsole.psm1;",
-              "Set-MsBuildDevEnvironment;",
-              "Set-Location -Path ${workspaceFolder}\\src\\cascadia\\CascadiaPackage\\AppPackages\\CascadiaPackage_0.0.1.0_x64_Debug_Test;",
-              "if ((Get-AppxPackage -Name 'WindowsTerminalDev*') -ne $null) { Remove-AppxPackage 'WindowsTerminalDev_0.0.1.0_x64__8wekyb3d8bbwe'};",
-              "New-Item ..\\loose -Type Directory -Force;",
-              "makeappx unpack /v /o /p .\\CascadiaPackage_0.0.1.0_x64_Debug.msix /d ..\\Loose\\;",
-              "Add-AppxPackage -Path ..\\loose\\AppxManifest.xml -Register -ForceUpdateFromAnyVersion -ForceApplicationShutdown"
-            ],
-            "problemMatcher": ["$msCompile"],
-            "group": {
-              "kind": "build"
-            }
-        },
-        {
-            "type": "process",
-            "label": "Run Windows Terminal Dev",
-            "command": "wtd.exe",
-            "args": [
-            ],
-            "problemMatcher": ["$msCompile"],
-        },
-        {
-            "type": "process",
-            "label": "Run Code Format",
-            "command": "powershell.exe",
-            "args": [
-              "-Command",
-              "Import-Module ${workspaceFolder}\\tools\\OpenConsole.psm1;",
-              "Set-MsBuildDevEnvironment;",
-              "Invoke-CodeFormat",
-            ],
-            "problemMatcher": ["$msCompile"],
-        }
-    ],
-    "inputs":[
-        {
-            "id": "platformChoice",
-            "type": "pickString",
-            "description": "Processor architecture choice",
-            "options":[
-                "x64",
-                "x86",
-                "arm64"
-            ],
-            "default": "x64"
-        },
-        {
-            "id": "configChoice",
-            "type": "pickString",
-            "description": "Debug or release?",
-            "options":[
-                "Debug",
-                "Release"
-            ],
-            "default": "Debug"
-        },
-        {
-            "id": "buildModeChoice",
-            "type": "pickString",
-            "description": "Build, rebuild, or clean?",
-            "options":[
-                "Build",
-                "Rebuild",
-                "Clean"
-            ],
-            "default": "Build"
-        },
-        {
-            "id": "buildProjectChoice",
-            "type": "pickString",
-            "description": "OpenConsole or Terminal?",
-            "options":[
-                "OpenConsole",
-                "Terminal",
-                "TermControl"
-            ],
-            "default": "Terminal"
-        }
-
-    ]
-}

.vsconfig

@@ -17,7 +17,7 @@
     "Microsoft.Net.Component.4.5.TargetingPack",
     "Microsoft.VisualStudio.Component.DiagnosticTools",
     "Microsoft.VisualStudio.Component.Debugger.JustInTime",
-    "Microsoft.VisualStudio.Component.Windows11SDK.22621",
+    "Microsoft.VisualStudio.Component.Windows10SDK.18362",
     "Microsoft.VisualStudio.ComponentGroup.UWP.Support",
     "Microsoft.VisualStudio.Component.VC.CoreIde",
     "Microsoft.VisualStudio.ComponentGroup.NativeDesktop.Core",
@@ -25,11 +25,10 @@
     "Microsoft.VisualStudio.Component.VC.Redist.14.Latest",
     "Microsoft.VisualStudio.Component.VC.Tools.x86.x64",
     "Microsoft.VisualStudio.Component.VC.Tools.ARM64",
-    "Microsoft.VisualStudio.Component.VC.ASAN",
-    "Microsoft.VisualStudio.Component.VC.v143.x86.x64",
-    "Microsoft.VisualStudio.Component.VC.v143.ARM64",
+    "Microsoft.VisualStudio.Component.VC.v142.x86.x64",
+    "Microsoft.VisualStudio.Component.VC.v142.ARM64",
     "Microsoft.VisualStudio.ComponentGroup.UWP.VC",
-    "Microsoft.VisualStudio.ComponentGroup.UWP.VC.v143",
+    "Microsoft.VisualStudio.ComponentGroup.UWP.VC.v142",
     "Microsoft.VisualStudio.Component.UWP.VC.ARM64"
   ]
 }

CODE_OF_CONDUCT.md

@@ -1,9 +1,8 @@
-# Microsoft Open Source Code of Conduct
+# Code of Conduct
 
-This project has adopted the [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/).
+This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
+For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
 
-Resources:
-
-- [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/)
-- [Microsoft Code of Conduct FAQ](https://opensource.microsoft.com/codeofconduct/faq/)
-- Contact [opencode@microsoft.com](mailto:opencode@microsoft.com) with questions or concerns
+[conduct-code]: https://opensource.microsoft.com/codeofconduct/
+[conduct-FAQ]: https://opensource.microsoft.com/codeofconduct/faq/
+[conduct-email]: mailto:opencode@microsoft.com

CONTRIBUTING.md

@@ -14,7 +14,7 @@ The point of doing all this work in public is to ensure that we are holding ours
 
 The team triages new issues several times a week. During triage, the team uses labels to categorize, manage, and drive the project workflow.
 
-We employ [a bot engine](./doc/bot.md) to help us automate common processes within our workflow.
+We employ [a bot engine](https://github.com/microsoft/terminal/blob/master/doc/bot.md) to help us automate common processes within our workflow.
 
 We drive the bot by tagging issues with specific labels which cause the bot engine to close issues, merge branches, etc. This bot engine helps us keep the repo clean by automating the process of notifying appropriate parties if/when information/follow-up is needed, and closing stale issues/PRs after reminders have remained unanswered for several days.
 
@@ -43,7 +43,7 @@ If no existing item describes your issue/feature, great - please file a new issu
 * Have a question that you don't see answered in docs, videos, etc.? File an issue
 * Want to know if we're planning on building a particular feature? File an issue
 * Got a great idea for a new feature? File an issue/request/idea
-* Don't understand how to do something? File an issue
+* Don't understand how to do something? File an issue/Community Guidance Request
 * Found an existing issue that describes yours? Great - upvote and add additional commentary / info / repro-steps / etc.
 
 When you hit "New Issue", select the type of issue closest to what you want to report/ask/request:
@@ -81,7 +81,7 @@ When you hit "New Issue", select the type of issue closest to what you want to r
   Microsoft Windows [Version 10.0.18900.1001]
   ```
 
-* What tools and apps you're using (e.g. VS 2022, VSCode, etc.)
+* What tools and apps you're using (e.g. VS 2019, VSCode, etc.)
 * Don't assume we're experts in setting up YOUR environment and don't assume we are experts in `<your distro/tool of choice>`. Teach us to help you!
 * **We LOVE detailed repro steps!** What steps do we need to take to reproduce the issue? Assume we love to read repro steps. As much detail as you can stand is probably _barely_ enough detail for us!
 * If you're reporting a particular character/glyph not rendering correctly, the specific Unicode codepoint would be MOST welcome (e.g. U+1F4AF, U+4382)
@@ -99,39 +99,25 @@ If you don't have any additional info/context to add but would like to indicate
 
 ## Contributing fixes / features
 
-If you're able & willing to help fix issues and/or implement features, we'd love your contribution!
-
-The best place to start is the list of ["walkthroughs"](https://aka.ms/terminal-walkthroughs). This is a collection of issues where we've written a "walkthrough", little guides to help get started with a particular issue. These are usually good first issues, and are a great way to get familiar with the codebase. Additionally, the list of ["good first issue"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22++label%3A%22good+first+issue%22+)s is another set of issues that might be easier for first-time contributors. Once you're feeling more comfortable in the codebase, feel free to just use the ["Help Wanted"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22+) label, or just find any issue you're interested in and hop in!
-
-Generally, we categorize issues in the following way, which is largely derived from our old internal work tracking system:
-* ["Bugs"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Bug%22+) are parts of the Terminal & Console that are not quite working the right way. There's code to already support some scenario, but it's not quite working right. Fixing these is generally a matter of debugging the broken functionality and fixing the wrong code.
-* ["Tasks"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Task%22+) are usually new pieces of functionality that aren't yet implemented for the Terminal/Console. These are usually smaller features, which we believe
-  - could be a single, atomic PR
-  - Don't require much design consideration, or we've already written the spec for the larger feature they belong to.
-* ["Features"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Feature%22+) are larger pieces of new functionality. These are usually things we believe would require larger discussion of how they should be implemented, or they'll require some complicated new settings. They might just be features that are composed of many individual tasks. Often times, with features, we like to have a spec written before development work is started, to make sure we're all on the same page (see below).
-
-Bugs and tasks are obviously the easiest to get started with, but don't feel afraid of features either! We've had some community members contribute some amazing "feature"-level work to the Terminal (albeit, with lots of discussion 😄).
-
-
-Often, we like to assign issues that generally belong to somebody's area of expertise to the team member that owns that area. This doesn't mean the community can't jump in -- they should reach out and have a chat with the assignee to see if it'd okay to take. If an issue's been assigned more than a month ago, there's a good chance it's fair game to try yourself.
+For those able & willing to help fix issues and/or implement features ...
 
 ### To Spec or not to Spec
 
 Some issues/features may be quick and simple to describe and understand. For such scenarios, once a team member has agreed with your approach, skip ahead to the section headed "Fork, Branch, and Create your PR", below.
 
-Small issues that do not require a spec will be labelled `Issue-Bug` or `Issue-Task`.
+Small issues that do not require a spec will be labelled Issue-Bug or Issue-Task.
 
-However, some issues/features will require careful thought & formal design before implementation. For these scenarios, we'll request that a spec is written and the associated issue will be labeled `Issue-Feature`. More often than not, we'll add such features to the ["Specification Tracker" project](https://github.com/microsoft/terminal/projects/1).
+However, some issues/features will require careful thought & formal design before implementation. For these scenarios, we'll request that a spec is written and the associated issue will be labeled Issue-Feature.
 
 Specs help collaborators discuss different approaches to solve a problem, describe how the feature will behave, how the feature will impact the user, what happens if something goes wrong, etc. Driving towards agreement in a spec, before any code is written, often results in simpler code, and less wasted effort in the long run.
 
-Specs will be managed in a very similar manner as code contributions so please follow the "[Fork, Branch and Create your PR](CONTRIBUTING.md#fork-clone-branch-and-create-your-pr)" section below.
+Specs will be managed in a very similar manner as code contributions so please follow the "Fork, Branch and Create your PR" below.
 
 ### Writing / Contributing-to a Spec
 
 To write/contribute to a spec: fork, branch and commit via PRs, as you would with any code changes.
 
-Specs are written in markdown, stored under the [`\doc\specs`](./doc/specs) folder and named `[issue id] - [spec description].md`.
+Specs are written in markdown, stored under the `\doc\spec` folder and named `[issue id] - [spec description].md`.
 
 👉 **It is important to follow the spec templates and complete the requested information**. The available spec templates will help ensure that specs contain the minimum information & decisions necessary to permit development to begin. In particular, specs require you to confirm that you've already discussed the issue/idea with the team in an issue and that you provide the issue ID for reference.
 
@@ -139,7 +125,7 @@ Team members will be happy to help review specs and guide them to completion.
 
 ### Help Wanted
 
-Once the team has approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help%20Wanted).
+Once the team have approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help-Wanted).
 
 ---
 
@@ -154,13 +140,6 @@ Once you've discussed your proposed feature/fix/etc. with a team member, and you
 1. Create & push a feature branch
 1. Create a [Draft Pull Request (PR)](https://github.blog/2019-02-14-introducing-draft-pull-requests/)
 1. Work on your changes
-1. Build and see if it works. Consult [How to build OpenConsole](./doc/building.md) if you have problems.
-
-### Testing
-
-Testing is a key component in the development workflow. Both Windows Terminal and Windows Console use TAEF(the Test Authoring and Execution Framework) as the main framework for testing.
-
-If your changes affect existing test cases, or you're working on brand new features and also the accompanying test cases, see [TAEF](./doc/TAEF.md) for more information about how to validate your work locally.
 
 ### Code Review
 
@@ -170,10 +149,10 @@ When you'd like the team to take a look, (even if the work is not yet fully-comp
 
 ### Merge
 
-Once your code has been reviewed and approved by the requisite number of team members, it will be merged into the main branch. Once merged, your PR will be automatically closed.
+Once your code has been reviewed and approved by the requisite number of team members, it will be merged into the master branch. Once merged, your PR will be automatically closed.
 
 ---
 
 ## Thank you
 
-Thank you in advance for your contribution! Now, [what's next on the list](https://github.com/microsoft/terminal/labels/Help%20Wanted)? 😜
+Thank you in advance for your contribution! Now, [what's next on the list](https://github.com/microsoft/terminal/labels/Help-Wanted)? 😜

NOTICE.md

@@ -2,7 +2,7 @@
 Do Not Translate or Localize
 
 This software incorporates material from third parties. Microsoft makes certain
-open source code available at [http://3rdpartysource.microsoft.com](http://3rdpartysource.microsoft.com), or you may
+open source code available at http://3rdpartysource.microsoft.com, or you may
 send a check or money order for US $5.00, including the product name, the open
 source component name, and version number, to:
 
@@ -20,7 +20,7 @@ General Public License.
 
 ## jsoncpp
 
-**Source**: [https://github.com/open-source-parsers/jsoncpp](https://github.com/open-source-parsers/jsoncpp)
+**Source**: https://github.com/open-source-parsers/jsoncpp
 
 ### License
 
@@ -48,9 +48,39 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
 ```
 
+## telnetpp
+
+**Source**: https://github.com/KazDragon/telnetpp
+
+### License 
+
+```
+The MIT License (MIT)
+
+Copyright (c) 2015-2017 Matthew Chaplain a.k.a KazDragon
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+```
+
 ## chromium/base/numerics
 
-**Source**: [https://github.com/chromium/chromium/tree/master/base/numerics](https://github.com/chromium/chromium/tree/master/base/numerics)
+**Source**: 
 
 ### License
 
@@ -82,291 +112,4 @@ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-```
-
-## kimwalisch/libpopcnt
-
-**Source**: [https://github.com/kimwalisch/libpopcnt](https://github.com/kimwalisch/libpopcnt)
-
-### License
-
-```
-BSD 2-Clause License
-
-Copyright (c) 2016 - 2019, Kim Walisch
-Copyright (c) 2016 - 2019, Wojciech Muła
-
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-```
-
-## dynamic_bitset
-
-**Source**: [https://github.com/pinam45/dynamic_bitset](https://github.com/pinam45/dynamic_bitset)
-
-### License
-
-```
-MIT License
-
-Copyright (c) 2019 Maxime Pinard
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-```
-
-## \{fmt\}
-
-**Source**: [https://github.com/fmtlib/fmt](https://github.com/fmtlib/fmt)
-
-### License
-
-```
-MIT License
-
-Copyright (c) 2012 - present, Victor Zverovich
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
---- Optional exception to the license ---
-
-As an exception, if, as a result of your compiling your source code, portions
-of this Software are embedded into a machine-executable object form of such
-source code, you may redistribute such embedded portions in such object form
-without including the above copyright and permission notices.
-```
-
-## interval_tree
-
-**Source**: [https://github.com/ekg/IntervalTree](https://github.com/ekg/IntervalTree)
-
-### License
-
-```
-Copyright (c) 2011 Erik Garrison
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of
-this software and associated documentation files (the "Software"), to deal in
-the Software without restriction, including without limitation the rights to
-use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
-of the Software, and to permit persons to whom the Software is furnished to do
-so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-```
-
-## PCG Random Number Generation
-
-**Source**: [https://github.com/imneme/pcg-cpp](https://github.com/imneme/pcg-cpp)
-
-### License
-
-```
-Copyright (c) 2014-2017 Melissa O'Neill and PCG Project contributors
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-```
-
-## wyhash
-
-**Source**: [https://github.com/wangyi-fudan/wyhash](https://github.com/wangyi-fudan/wyhash)
-
-### License
-
-```
-This is free and unencumbered software released into the public domain.
-
-Anyone is free to copy, modify, publish, use, compile, sell, or
-distribute this software, either in source code form or as a compiled
-binary, for any purpose, commercial or non-commercial, and by any
-means.
-
-In jurisdictions that recognize copyright laws, the author or authors
-of this software dedicate any and all copyright interest in the
-software to the public domain. We make this dedication for the benefit
-of the public at large and to the detriment of our heirs and
-successors. We intend this dedication to be an overt act of
-relinquishment in perpetuity of all present and future rights to this
-software under copyright law.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-For more information, please refer to <http://unlicense.org/>
-```
-
-## stb
-
-**Source**: [https://github.com/nothings/stb](https://github.com/nothings/stb)
-
-### License
-
-```
-This is free and unencumbered software released into the public domain.
-Anyone is free to copy, modify, publish, use, compile, sell, or distribute this
-software, either in source code form or as a compiled binary, for any purpose,
-commercial or non-commercial, and by any means.
-In jurisdictions that recognize copyright laws, the author or authors of this
-software dedicate any and all copyright interest in the software to the public
-domain. We make this dedication for the benefit of the public at large and to
-the detriment of our heirs and successors. We intend this dedication to be an
-overt act of relinquishment in perpetuity of all present and future rights to
-this software under copyright law.
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-```
-
-## Oklab
-**Source**: [https://bottosson.github.io/posts/oklab/](https://bottosson.github.io/posts/oklab/)
-
-### License
-
-```
-Copyright (c) 2020 Björn Ottosson
-Permission is hereby granted, free of charge, to any person obtaining a copy of
-this software and associated documentation files (the "Software"), to deal in
-the Software without restriction, including without limitation the rights to
-use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
-of the Software, and to permit persons to whom the Software is furnished to do
-so, subject to the following conditions:
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-```
-
-# Microsoft Open Source
-
-This product also incorporates source code from other Microsoft open source projects, all licensed under the MIT license.
-
-## `GSL`
-
-**Source**: [https://github.com/microsoft/GSL](https://github.com/microsoft/GSL)
-
-## `Microsoft-UI-XAML`
-
-**Source**: [https://github.com/microsoft/Microsoft-UI-XAML](https://github.com/microsoft/Microsoft-UI-XAML)
-
-## `VirtualDesktopUtils`
-
-**Source**: [https://github.com/microsoft/PowerToys](https://github.com/microsoft/PowerToys)
-
-## `wil`
-
-**Source**: [https://github.com/microsoft/wil](https://github.com/microsoft/wil)
-
-### License
-
-```
-The MIT License
-
-Copyright (c) Microsoft Corporation. All rights reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
-```
+```

NuGet.Config

@@ -1,17 +1,20 @@
 <?xml version="1.0" encoding="utf-8"?>
 <configuration>
     <packageSources>
-        <clear />
-        <!-- Dependencies that we can turn on to force override for testing purposes before uploading. -->
+        <add key="NuGet.org" value="https://api.nuget.org/v3/index.json" />
+        <!-- Add repositories here to the list of available repositories -->
+        
+        <!-- Dependencies that we must carry because they're not on public nuget feeds right now. -->
         <!--<add key="Static Package Dependencies" value="dep\packages" />-->
-        <add key="TerminalDependencies" value="https://pkgs.dev.azure.com/ms/terminal/_packaging/TerminalDependencies/nuget/v3/index.json" />
+        
+        <!-- Use our own NuGet Feed -->
+        <add key="Windows Terminal NuGet Feed" value="https://terminalnuget.blob.core.windows.net/feed/index.json" />
+        
+        <!-- Internal NuGet feeds that may not be accessible outside Microsoft corporate network -->
+        <!--<add key="TAEF - internal" value="https://microsoft.pkgs.visualstudio.com/DefaultCollection/_packaging/Taef/nuget/v3/index.json" />
+        <add key="OpenConsole - Internal" value="https://microsoft.pkgs.visualstudio.com/_packaging/OpenConsole/nuget/v3/index.json" />-->
     </packageSources>
-    <disabledPackageSources>
-        <clear />
-    </disabledPackageSources>
     <config>
-        <!-- TODO: TEMPORARY UNTIL PGO-Helpers is updated to search both. We shouldn't need to keep the globals path here. -->
-        <add key="globalPackagesFolder" value=".\packages" />
         <add key="repositorypath" value=".\packages" />
     </config>
 </configuration>

README.md

@@ -1,34 +1,25 @@
-![terminal-logos](https://github.com/microsoft/terminal/assets/91625426/333ddc76-8ab2-4eb4-a8c0-4d7b953b1179)
-
 # Welcome to the Windows Terminal, Console and Command-Line repo
 
 This repository contains the source code for:
 
-* [Windows Terminal](https://aka.ms/terminal)
-* [Windows Terminal Preview](https://aka.ms/terminal-preview)
+* [Windows Terminal](https://www.microsoft.com/en-us/p/windows-terminal-preview/9n0dx20hk701)
 * The Windows console host (`conhost.exe`)
 * Components shared between the two projects
-* [ColorTool](./src/tools/ColorTool)
-* [Sample projects](./samples)
-  that show how to consume the Windows Console APIs
+* [ColorTool](https://github.com/Microsoft/Terminal/tree/master/src/tools/ColorTool)
+* [Sample projects](https://github.com/Microsoft/Terminal/tree/master/samples) that show how to consume the Windows Console APIs
 
 Related repositories include:
 
-* [Windows Terminal Documentation](https://docs.microsoft.com/windows/terminal)
-  ([Repo: Contribute to the docs](https://github.com/MicrosoftDocs/terminal))
 * [Console API Documentation](https://github.com/MicrosoftDocs/Console-Docs)
 * [Cascadia Code Font](https://github.com/Microsoft/Cascadia-Code)
 
 ## Installing and running Windows Terminal
 
-> [!NOTE]
-> Windows Terminal requires Windows 10 2004 (build 19041) or later
+> 👉 Note: Windows Terminal requires Windows 10 1903 (build 18362) or later
 
 ### Microsoft Store [Recommended]
 
-Install the [Windows Terminal from the Microsoft Store][store-install-link].
-This allows you to always be on the latest version when we release new builds
-with automatic upgrades.
+Install the [Windows Terminal from the Microsoft Store][store-install-link]. This allows you to always be on the latest version when we release new builds with automatic upgrades. 
 
 This is our preferred method.
 
@@ -36,49 +27,16 @@ This is our preferred method.
 
 #### Via GitHub
 
-For users who are unable to install Windows Terminal from the Microsoft Store,
-released builds can be manually downloaded from this repository's [Releases
-page](https://github.com/microsoft/terminal/releases).
+For users who are unable to install Terminal from the Microsoft Store, Terminal builds can be manually downloaded from this repository's [Releases page](https://github.com/microsoft/terminal/releases).
 
-Download the `Microsoft.WindowsTerminal_<versionNumber>.msixbundle` file from
-the **Assets** section. To install the app, you can simply double-click on the
-`.msixbundle` file, and the app installer should automatically run. If that
-fails for any reason, you can try the following command at a PowerShell prompt:
-
-```powershell
-# NOTE: If you are using PowerShell 7+, please run
-# Import-Module Appx -UseWindowsPowerShell
-# before using Add-AppxPackage.
-
-Add-AppxPackage Microsoft.WindowsTerminal_<versionNumber>.msixbundle
-```
-
-> [!NOTE]
-> If you install Terminal manually:
+> ⚠ Note: If you install Terminal manually:
 >
-> * You may need to install the [VC++ v14 Desktop Framework Package](https://docs.microsoft.com/troubleshoot/cpp/c-runtime-packages-desktop-bridge#how-to-install-and-update-desktop-framework-packages).
->   This should only be necessary on older builds of Windows 10 and only if you get an error about missing framework packages.
-> * Terminal will not auto-update when new builds are released so you will need
->   to regularly install the latest Terminal release to receive all the latest
->   fixes and improvements!
-
-#### Via Windows Package Manager CLI (aka winget)
-
-[winget](https://github.com/microsoft/winget-cli) users can download and install
-the latest Terminal release by installing the `Microsoft.WindowsTerminal`
-package:
-
-```powershell
-winget install --id Microsoft.WindowsTerminal -e
-```
-
-> [!NOTE]
-> Dependency support is available in WinGet version [1.6.2631 or later](https://github.com/microsoft/winget-cli/releases). To install the Terminal stable release 1.18 or later, please make sure you have the updated version of the WinGet client.
+> * Be sure to install the [Desktop Bridge VC++ v14 Redistributable Package](https://www.microsoft.com/en-us/download/details.aspx?id=53175) otherwise Terminal may not install and/or run and may crash at startup
+> * Terminal will not auto-update when new builds are released so you will need to regularly install the latest Terminal release to receive all the latest fixes and improvements!
 
 #### Via Chocolatey (unofficial)
 
-[Chocolatey](https://chocolatey.org) users can download and install the latest
-Terminal release by installing the `microsoft-windows-terminal` package:
+[Chocolatey](https://chocolatey.org) users can download and install the latest Terminal release by installing the `microsoft-windows-terminal` package:
 
 ```powershell
 choco install microsoft-windows-terminal
@@ -90,166 +48,72 @@ To upgrade Windows Terminal using Chocolatey, run the following:
 choco upgrade microsoft-windows-terminal
 ```
 
-If you have any issues when installing/upgrading the package please go to the
-[Windows Terminal package
-page](https://chocolatey.org/packages/microsoft-windows-terminal) and follow the
-[Chocolatey triage process](https://chocolatey.org/docs/package-triage-process)
-
-#### Via Scoop (unofficial)
-
-[Scoop](https://scoop.sh) users can download and install the latest Terminal
-release by installing the `windows-terminal` package:
-
-```powershell
-scoop bucket add extras
-scoop install windows-terminal
-```
-
-To update Windows Terminal using Scoop, run the following:
-
-```powershell
-scoop update windows-terminal
-```
-
-If you have any issues when installing/updating the package, please search for
-or report the same on the [issues
-page](https://github.com/lukesampson/scoop-extras/issues) of Scoop Extras bucket
-repository.
+If you have any issues when installing/upgrading the package please go to the [Windows Terminal package page](https://chocolatey.org/packages/microsoft-windows-terminal) and follow the [Chocolatey triage process](https://chocolatey.org/docs/package-triage-process)
 
 ---
 
-## Installing Windows Terminal Canary
-Windows Terminal Canary is a nightly build of Windows Terminal. This build has the latest code from our `main` branch, giving you an opportunity to try features before they make it to Windows Terminal Preview.
-
-Windows Terminal Canary is our least stable offering, so you may discover bugs before we have had a chance to find them.
-
-Windows Terminal Canary is available as an App Installer distribution and a Portable ZIP distribution.
-
-The App Installer distribution supports automatic updates. Due to platform limitations, this installer only works on Windows 11.
-
-The Portable ZIP distribution is a portable application. It will not automatically update and will not automatically check for updates. This portable ZIP distribution works on Windows 10 (19041+) and Windows 11.
-
-| Distribution  | Architecture    | Link                                                 |
-|---------------|:---------------:|------------------------------------------------------|
-| App Installer | x64, arm64, x86 | [download](https://aka.ms/terminal-canary-installer) |
-| Portable ZIP  | x64             | [download](https://aka.ms/terminal-canary-zip-x64)   |
-| Portable ZIP  | ARM64           | [download](https://aka.ms/terminal-canary-zip-arm64) |
-| Portable ZIP  | x86             | [download](https://aka.ms/terminal-canary-zip-x86)   |
-
-_Learn more about the [types of Windows Terminal distributions](https://learn.microsoft.com/windows/terminal/distributions)._
-
----
-
-## Windows Terminal Roadmap
-
-The plan for the Windows Terminal [is described here](/doc/roadmap-2023.md) and
-will be updated as the project proceeds.
-
 ## Project Build Status
 
 Project|Build Status
 ---|---
-Terminal|[![Terminal Build Status](https://dev.azure.com/ms/terminal/_apis/build/status/terminal%20CI?branchName=main)](https://dev.azure.com/ms/terminal/_build?definitionId=136)
-ColorTool|![Colortool Build Status](https://microsoft.visualstudio.com/_apis/public/build/definitions/c93e867a-8815-43c1-92c4-e7dd5404f1e1/17023/badge)
+Terminal|[![Build Status](https://dev.azure.com/ms/Terminal/_apis/build/status/Terminal%20CI?branchName=master)](https://dev.azure.com/ms/Terminal/_build?definitionId=136)
+ColorTool|![](https://microsoft.visualstudio.com/_apis/public/build/definitions/c93e867a-8815-43c1-92c4-e7dd5404f1e1/17023/badge)
+
+---
+
+## Windows Terminal v1.0 Roadmap
+
+The plan for delivering Windows Terminal v1.0 [is described here](/doc/terminal-v1-roadmap.md), and will be updated as the project proceeds.
 
 ---
 
 ## Terminal & Console Overview
 
-Please take a few minutes to review the overview below before diving into the
-code:
+Please take a few minutes to review the overview below before diving into the code:
 
 ### Windows Terminal
 
-Windows Terminal is a new, modern, feature-rich, productive terminal application
-for command-line users. It includes many of the features most frequently
-requested by the Windows command-line community including support for tabs, rich
-text, globalization, configurability, theming & styling, and more.
+Windows Terminal is a new, modern, feature-rich, productive terminal application for command-line users. It includes many of the features most frequently requested by the Windows command-line community including support for tabs, rich text, globalization, configurability, theming & styling, and more.
 
-The Terminal will also need to meet our goals and measures to ensure it remains
-fast and efficient, and doesn't consume vast amounts of memory or power.
+The Terminal will also need to meet our goals and measures to ensure it remains fast and efficient, and doesn't consume vast amounts of memory or power.
 
 ### The Windows Console Host
 
-The Windows Console host, `conhost.exe`, is Windows' original command-line user
-experience. It also hosts Windows' command-line infrastructure and the Windows
-Console API server, input engine, rendering engine, user preferences, etc. The
-console host code in this repository is the actual source from which the
-`conhost.exe` in Windows itself is built.
+The Windows Console host, `conhost.exe`, is Windows' original command-line user experience. It also hosts Windows' command-line infrastructure and the Windows Console API server, input engine, rendering engine, user preferences, etc. The console host code in this repository is the actual source from which the `conhost.exe` in Windows itself is built.
 
-Since taking ownership of the Windows command-line in 2014, the team added
-several new features to the Console, including background transparency,
-line-based selection, support for [ANSI / Virtual Terminal
-sequences](https://en.wikipedia.org/wiki/ANSI_escape_code), [24-bit
-color](https://devblogs.microsoft.com/commandline/24-bit-color-in-the-windows-console/),
-a [Pseudoconsole
-("ConPTY")](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/),
-and more.
+Since taking ownership of the Windows command-line in 2014, the team added several new features to the Console, including background transparency, line-based selection, support for [ANSI / Virtual Terminal sequences](https://en.wikipedia.org/wiki/ANSI_escape_code), [24-bit color](https://devblogs.microsoft.com/commandline/24-bit-color-in-the-windows-console/), a [Pseudoconsole ("ConPTY")](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/), and more.
 
-However, because Windows Console's primary goal is to maintain backward
-compatibility, we have been unable to add many of the features the community
-(and the team) have been wanting for the last several years including tabs,
-unicode text, and emoji.
+However, because Windows Console's primary goal is to maintain backward compatibility, we have been unable to add many of the features the community (and the team) have been wanting for the last several years including tabs, unicode text, and emoji.
 
 These limitations led us to create the new Windows Terminal.
 
-> You can read more about the evolution of the command-line in general, and the
-> Windows command-line specifically in [this accompanying series of blog
-> posts](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/)
-> on the Command-Line team's blog.
+> You can read more about the evolution of the command-line in general, and the Windows command-line specifically in [this accompanying series of blog posts](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/) on the Command-Line team's blog.
 
 ### Shared Components
 
-While overhauling Windows Console, we modernized its codebase considerably,
-cleanly separating logical entities into modules and classes, introduced some
-key extensibility points, replaced several old, home-grown collections and
-containers with safer, more efficient [STL
-containers](https://docs.microsoft.com/en-us/cpp/standard-library/stl-containers?view=vs-2022),
-and made the code simpler and safer by using Microsoft's [Windows Implementation
-Libraries - WIL](https://github.com/Microsoft/wil).
+While overhauling Windows Console, we modernized its codebase considerably, cleanly separating logical entities into modules and classes, introduced some key extensibility points, replaced several old, home-grown collections and containers with safer, more efficient [STL containers](https://docs.microsoft.com/en-us/cpp/standard-library/stl-containers?view=vs-2019), and made the code simpler and safer by using Microsoft's [Windows Implementation Libraries - WIL](https://github.com/Microsoft/wil).
 
-This overhaul resulted in several of Console's key components being available
-for re-use in any terminal implementation on Windows. These components include a
-new DirectWrite-based text layout and rendering engine, a text buffer capable of
-storing both UTF-16 and UTF-8, a VT parser/emitter, and more.
+This overhaul resulted in several of Console's key components being available for re-use in any terminal implementation on Windows. These components include a new DirectWrite-based text layout and rendering engine, a text buffer capable of storing both UTF-16 and UTF-8, a VT parser/emitter, and more.
 
 ### Creating the new Windows Terminal
 
-When we started planning the new Windows Terminal application, we explored and
-evaluated several approaches and technology stacks. We ultimately decided that
-our goals would be best met by continuing our investment in our C++ codebase,
-which would allow us to reuse several of the aforementioned modernized
-components in both the existing Console and the new Terminal. Further, we
-realized that this would allow us to build much of the Terminal's core itself as
-a reusable UI control that others can incorporate into their own applications.
+When we started planning the new Windows Terminal application, we explored and evaluated several approaches and technology stacks. We ultimately decided that our goals would be best met by continuing our investment in our C++ codebase, which would allow us to reuse several of the aforementioned modernized components in both the existing Console and the new Terminal. Further, we realized that this would allow us to build much of the Terminal's core itself as a reusable UI control that others can incorporate into their own applications.
 
-The result of this work is contained within this repo and delivered as the
-Windows Terminal application you can download from the Microsoft Store, or
-[directly from this repo's
-releases](https://github.com/microsoft/terminal/releases).
+The result of this work is contained within this repo and delivered as the Windows Terminal application you can download from the Microsoft Store, or [directly from this repo's releases](https://github.com/microsoft/terminal/releases).
 
 ---
 
 ## Resources
 
-For more information about Windows Terminal, you may find some of these
-resources useful and interesting:
+For more information about Windows Terminal, you may find some of these resources useful and interesting:
 
 * [Command-Line Blog](https://devblogs.microsoft.com/commandline)
-* [Command-Line Backgrounder Blog
-  Series](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/)
-* Windows Terminal Launch: [Terminal "Sizzle
-  Video"](https://www.youtube.com/watch?v=8gw0rXPMMPE&list=PLEHMQNlPj-Jzh9DkNpqipDGCZZuOwrQwR&index=2&t=0s)
-* Windows Terminal Launch: [Build 2019
-  Session](https://www.youtube.com/watch?v=KMudkRcwjCw)
-* Run As Radio: [Show 645 - Windows Terminal with Richard
-  Turner](https://www.runasradio.com/Shows/Show/645)
-* Azure Devops Podcast: [Episode 54 - Kayla Cinnamon and Rich Turner on DevOps
-  on the Windows
-  Terminal](http://azuredevopspodcast.clear-measure.com/kayla-cinnamon-and-rich-turner-on-devops-on-the-windows-terminal-team-episode-54)
-* Microsoft Ignite 2019 Session: [The Modern Windows Command Line: Windows
-  Terminal -
-  BRK3321](https://myignite.techcommunity.microsoft.com/sessions/81329?source=sessions)
+* [Command-Line Backgrounder Blog Series](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/)
+* Windows Terminal Launch: [Terminal "Sizzle Video"](https://www.youtube.com/watch?v=8gw0rXPMMPE&list=PLEHMQNlPj-Jzh9DkNpqipDGCZZuOwrQwR&index=2&t=0s)
+* Windows Terminal Launch: [Build 2019 Session](https://www.youtube.com/watch?v=KMudkRcwjCw)
+* Run As Radio: [Show 645 - Windows Terminal with Richard Turner](http://www.runasradio.com/Shows/Show/645)
+* Azure Devops Podcast: [Episode 54 - Kayla Cinnamon and Rich Turner on DevOps on the Windows Terminal](http://azuredevopspodcast.clear-measure.com/kayla-cinnamon-and-rich-turner-on-devops-on-the-windows-terminal-team-episode-54)
+* Microsoft Ignite 2019 Session: [The Modern Windows Command Line: Windows Terminal - BRK3321](https://myignite.techcommunity.microsoft.com/sessions/81329?source=sessions)
 
 ---
 
@@ -259,91 +123,63 @@ resources useful and interesting:
 
 Cause: You're launching the incorrect solution in Visual Studio.
 
-Solution: Make sure you're building & deploying the `CascadiaPackage` project in
-Visual Studio.
+Solution: Make sure you're building & deploying the `CascadiaPackage` project in Visual Studio.
 
-> [!NOTE]
-> `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic
-> Windows Console that hosts Windows' command-line infrastructure. OpenConsole
-> is used by Windows Terminal to connect to and communicate with command-line
-> applications (via
-> [ConPty](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/)).
+> ⚠ Note: `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic Windows Console that hosts Windows' command-line infrastructure. OpenConsole is used by Windows Terminal to connect to and communicate with command-line applications (via [ConPty](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/)).
 
 ---
 
 ## Documentation
 
-All project documentation is located at [aka.ms/terminal-docs](https://aka.ms/terminal-docs). If you would like
-to contribute to the documentation, please submit a pull request on the [Windows
-Terminal Documentation repo](https://github.com/MicrosoftDocs/terminal).
+All project documentation is located in the `./doc` folder. If you would like to contribute to the documentation, please submit a pull request.
 
 ---
 
 ## Contributing
 
-We are excited to work alongside you, our amazing community, to build and
-enhance Windows Terminal\!
+We are excited to work alongside you, our amazing community, to build and enhance Windows Terminal\!
 
-***BEFORE you start work on a feature/fix***, please read & follow our
-[Contributor's
-Guide](./CONTRIBUTING.md) to
-help avoid any wasted or duplicate effort.
+***BEFORE you start work on a feature/fix***, please read & follow our [Contributor's Guide](https://github.com/microsoft/terminal/blob/master/CONTRIBUTING.md) to help avoid any wasted or duplicate effort.
 
 ## Communicating with the Team
 
 The easiest way to communicate with the team is via GitHub issues.
 
-Please file new issues, feature requests and suggestions, but **DO search for
-similar open/closed preexisting issues before creating a new issue.**
+Please file new issues, feature requests and suggestions, but **DO search for similar open/closed pre-existing issues before creating a new issue.**
 
-If you would like to ask a question that you feel doesn't warrant an issue
-(yet), please reach out to us via Twitter:
+If you would like to ask a question that you feel doesn't warrant an issue (yet), please reach out to us via Twitter:
 
-* Christopher Nguyen, Product Manager:
-  [@nguyen_dows](https://twitter.com/nguyen_dows)
+* Kayla Cinnamon, Program Manager: [@cinnamon\_msft](https://twitter.com/cinnamon_msft)
+* Rich Turner, Program Manager: [@richturn\_ms](https://twitter.com/richturn_ms)
 * Dustin Howett, Engineering Lead: [@dhowett](https://twitter.com/DHowett)
-* Mike Griese, Senior Developer: [@zadjii@mastodon.social](https://mastodon.social/@zadjii)
+* Michael Niksa, Senior Developer: [@michaelniksa](https://twitter.com/MichaelNiksa)
+* Mike Griese, Developer: [@zadjii](https://twitter.com/zadjii)
 * Carlos Zamora, Developer: [@cazamor_msft](https://twitter.com/cazamor_msft)
-* Pankaj Bhojwani, Developer
-* Leonard Hecker, Developer: [@LeonardHecker](https://twitter.com/LeonardHecker)
+* Leon Liang, Developer: [@leonmsft](https://twitter.com/leonmsft)
 
 ## Developer Guidance
 
 ## Prerequisites
 
-* You must be running Windows 10 2004 (build >= 10.0.19041.0) or later to run
-  Windows Terminal
-* You must [enable Developer Mode in the Windows Settings
-  app](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development)
-  to locally install and run Windows Terminal
-* You must have [PowerShell 7 or later](https://github.com/PowerShell/PowerShell/releases/latest) installed
-* You must have the [Windows 11 (10.0.22621.0)
-  SDK](https://developer.microsoft.com/en-us/windows/downloads/windows-sdk/)
-  installed
-* You must have at least [VS
-  2022](https://visualstudio.microsoft.com/downloads/) installed
-* You must install the following Workloads via the VS Installer. Note: Opening
-  the solution in VS 2022 will [prompt you to install missing components
-  automatically](https://devblogs.microsoft.com/setup/configure-visual-studio-across-your-organization-with-vsconfig/):
+* You must be running Windows 1903 (build >= 10.0.18362.0) or later to run Windows Terminal
+* You must [enable Developer Mode in the Windows Settings app](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development) to locally install and run Windows Terminal
+* You must have the [Windows 10 1903 SDK](https://developer.microsoft.com/en-us/windows/downloads/windows-10-sdk) installed
+* You must have at least [VS 2019](https://visualstudio.microsoft.com/downloads/) installed
+* You must install the following Workloads via the VS Installer. Note: Opening the solution in VS 2019 will [prompt you to install missing components automatically](https://devblogs.microsoft.com/setup/configure-visual-studio-across-your-organization-with-vsconfig/):
   * Desktop Development with C++
   * Universal Windows Platform Development
   * **The following Individual Components**
-    * C++ (v143) Universal Windows Platform Tools
-* You must install the [.NET Framework Targeting Pack](https://docs.microsoft.com/dotnet/framework/install/guide-for-developers#to-install-the-net-framework-developer-pack-or-targeting-pack) to build test projects
+    * C++ (v142) Universal Windows Platform Tools
 
 ## Building the Code
 
-This repository uses [git
-submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its
-dependencies. To make sure submodules are restored or updated, be sure to run
-the following prior to building:
+This repository uses [git submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its dependencies. To make sure submodules are restored or updated, be sure to run the following prior to building:
 
 ```shell
 git submodule update --init --recursive
 ```
 
-OpenConsole.sln may be built from within Visual Studio or from the command-line
-using a set of convenience scripts & tools in the **/tools** directory:
+OpenConsole.sln may be built from within Visual Studio or from the command-line using a set of convenience scripts & tools in the **/tools** directory:
 
 ### Building in PowerShell
 
@@ -362,46 +198,33 @@ bcz
 
 ## Running & Debugging
 
-To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the
-Solution Explorer) and go to properties. In the Debug menu, change "Application
-process" and "Background task process" to "Native Only".
+To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the Solution Explorer) and go to properties. In the Debug menu, change "Application process" and "Background task process" to "Native Only".
 
-You should then be able to build & debug the Terminal project by hitting
-<kbd>F5</kbd>. Make sure to select either the "x64" or the "x86" platform - the
-Terminal doesn't build for "Any Cpu" (because the Terminal is a C++ application,
-not a C# one).
+You should then be able to build & debug the Terminal project by hitting <kbd>F5</kbd>.
 
-> 👉 You will _not_ be able to launch the Terminal directly by running the
-> WindowsTerminal.exe. For more details on why, see
-> [#926](https://github.com/microsoft/terminal/issues/926),
-> [#4043](https://github.com/microsoft/terminal/issues/4043)
+> 👉 You will _not_ be able to launch the Terminal directly by running the WindowsTerminal.exe. For more details on why, see [#926](https://github.com/microsoft/terminal/issues/926), [#4043](https://github.com/microsoft/terminal/issues/4043)
 
 ### Coding Guidance
 
 Please review these brief docs below about our coding practices.
 
-> 👉 If you find something missing from these docs, feel free to contribute to
-> any of our documentation files anywhere in the repository (or write some new
-> ones!)
+> 👉 If you find something missing from these docs, feel free to contribute to any of our documentation files anywhere in the repository (or write some new ones!)
 
-This is a work in progress as we learn what we'll need to provide people in
-order to be effective contributors to our project.
+This is a work in progress as we learn what we'll need to provide people in order to be effective contributors to our project.
 
-* [Coding Style](./doc/STYLE.md)
-* [Code Organization](./doc/ORGANIZATION.md)
-* [Exceptions in our legacy codebase](./doc/EXCEPTIONS.md)
-* [Helpful smart pointers and macros for interfacing with Windows in WIL](./doc/WIL.md)
+* [Coding Style](https://github.com/Microsoft/Terminal/blob/master/doc/STYLE.md)
+* [Code Organization](https://github.com/Microsoft/Terminal/blob/master/doc/ORGANIZATION.md)
+* [Exceptions in our legacy codebase](https://github.com/Microsoft/Terminal/blob/master/doc/EXCEPTIONS.md)
+* [Helpful smart pointers and macros for interfacing with Windows in WIL](https://github.com/Microsoft/Terminal/blob/master/doc/WIL.md)
 
 ---
 
-## Code of Conduct
+# Code of Conduct
 
-This project has adopted the [Microsoft Open Source Code of
-Conduct][conduct-code]. For more information see the [Code of Conduct
-FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any
-additional questions or comments.
+This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
+For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
 
 [conduct-code]: https://opensource.microsoft.com/codeofconduct/
 [conduct-FAQ]: https://opensource.microsoft.com/codeofconduct/faq/
 [conduct-email]: mailto:opencode@microsoft.com
-[store-install-link]: https://aka.ms/terminal
+[store-install-link]: https://aka.ms/windowsterminal

SUPPORT.md

@@ -1,17 +0,0 @@
-# Support
-
-## How to file issues and get help  
-
-This project uses [GitHub issues][gh-issue] to [track bugs][gh-bug] and [feature requests][gh-feature]. Please search the existing issues before filing new issues to avoid duplicates. For new topics, file your bug or feature request as a new issue.
-
-For help and questions about using this project, please look at the [docs site for Windows Terminal][docs] and our [Contributor's Guide][contributor] if you want to work on Windows Terminal.
-
-## Microsoft Support Policy  
-
-Support for Windows Terminal is limited to the resources listed above.
-
-[gh-issue]: https://github.com/microsoft/terminal/issues/new/choose
-[gh-bug]: https://github.com/microsoft/terminal/issues/new?assignees=&labels=Issue-Bug&template=bug_report.md&title=
-[gh-feature]: https://github.com/microsoft/terminal/issues/new?assignees=&labels=Issue-Feature&template=Feature_Request.md&title=
-[docs]: https://docs.microsoft.com/windows/terminal
-[contributor]: ./CONTRIBUTING.md

Scratch.sln

@@ -1,221 +0,0 @@
-
-Microsoft Visual Studio Solution File, Format Version 12.00
-# Visual Studio Version 16
-VisualStudioVersion = 16.0.31205.134
-MinimumVisualStudioVersion = 10.0.40219.1
-Project("{C7167F0D-BC9F-4E6E-AFE1-012C56B48DB5}") = "Package", "scratch\ScratchIslandApp\Package\Package.wapproj", "{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}"
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "SampleAppLib", "scratch\ScratchIslandApp\SampleApp\SampleAppLib.vcxproj", "{A4394404-37F7-41C1-802B-49788D3720E3}"
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "SampleApp", "scratch\ScratchIslandApp\SampleApp\dll\SampleApp.vcxproj", "{26C51792-41A3-4FE0-AB5E-8B69D557BF91}"
-	ProjectSection(ProjectDependencies) = postProject
-		{A4394404-37F7-41C1-802B-49788D3720E3} = {A4394404-37F7-41C1-802B-49788D3720E3}
-	EndProjectSection
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "WindowExe", "scratch\ScratchIslandApp\WindowExe\WindowExe.vcxproj", "{B4427499-9FDE-4208-B456-5BC580637633}"
-	ProjectSection(ProjectDependencies) = postProject
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91} = {26C51792-41A3-4FE0-AB5E-8B69D557BF91}
-	EndProjectSection
-EndProject
-Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Common Props", "Common Props", "{53DD5520-E64C-4C06-B472-7CE62CA539C9}"
-	ProjectSection(SolutionItems) = preProject
-		src\common.build.post.props = src\common.build.post.props
-		src\common.build.pre.props = src\common.build.pre.props
-		src\common.build.tests.props = src\common.build.tests.props
-		common.openconsole.props = common.openconsole.props
-		src\cppwinrt.build.post.props = src\cppwinrt.build.post.props
-		src\cppwinrt.build.pre.props = src\cppwinrt.build.pre.props
-		src\wap-common.build.post.props = src\wap-common.build.post.props
-		src\wap-common.build.pre.props = src\wap-common.build.pre.props
-	EndProjectSection
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "fmt", "src\dep\fmt\fmt.vcxproj", "{6BAE5851-50D5-4934-8D5E-30361A8A40F3}"
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Types", "src\types\lib\types.vcxproj", "{18D09A24-8240-42D6-8CB6-236EEE820263}"
-EndProject
-Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "dependencies", "dependencies", "{75AC9360-76FD-4ABC-AFEC-EF342BD2B3E9}"
-EndProject
-Global
-	GlobalSection(SolutionConfigurationPlatforms) = preSolution
-		AuditMode|ARM64 = AuditMode|ARM64
-		AuditMode|x64 = AuditMode|x64
-		AuditMode|x86 = AuditMode|x86
-		Debug|ARM64 = Debug|ARM64
-		Debug|x64 = Debug|x64
-		Debug|x86 = Debug|x86
-		Fuzzing|ARM64 = Fuzzing|ARM64
-		Fuzzing|x64 = Fuzzing|x64
-		Fuzzing|x86 = Fuzzing|x86
-		Release|ARM64 = Release|ARM64
-		Release|x64 = Release|x64
-		Release|x86 = Release|x86
-	EndGlobalSection
-	GlobalSection(ProjectConfigurationPlatforms) = postSolution
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|ARM64.ActiveCfg = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|ARM64.Build.0 = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|ARM64.Deploy.0 = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|x64.ActiveCfg = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|x64.Build.0 = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|x64.Deploy.0 = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|x86.ActiveCfg = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|x86.Build.0 = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.AuditMode|x86.Deploy.0 = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|ARM64.Build.0 = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|ARM64.Deploy.0 = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|x64.ActiveCfg = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|x64.Build.0 = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|x64.Deploy.0 = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|x86.ActiveCfg = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|x86.Build.0 = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Debug|x86.Deploy.0 = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|ARM64.ActiveCfg = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|ARM64.Build.0 = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|ARM64.Deploy.0 = Debug|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|x64.ActiveCfg = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|x64.Build.0 = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|x64.Deploy.0 = Debug|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|x86.ActiveCfg = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|x86.Build.0 = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Fuzzing|x86.Deploy.0 = Debug|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|ARM64.ActiveCfg = Release|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|ARM64.Build.0 = Release|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|ARM64.Deploy.0 = Release|ARM64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|x64.ActiveCfg = Release|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|x64.Build.0 = Release|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|x64.Deploy.0 = Release|x64
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|x86.ActiveCfg = Release|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|x86.Build.0 = Release|x86
-		{CF31505E-3BAE-4C0A-81D7-F1EB279F40BB}.Release|x86.Deploy.0 = Release|x86
-		{A4394404-37F7-41C1-802B-49788D3720E3}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.AuditMode|x64.Build.0 = AuditMode|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{A4394404-37F7-41C1-802B-49788D3720E3}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Debug|ARM64.Build.0 = Debug|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Debug|x64.ActiveCfg = Debug|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Debug|x64.Build.0 = Debug|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Debug|x86.ActiveCfg = Debug|Win32
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Debug|x86.Build.0 = Debug|Win32
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Fuzzing|ARM64.Build.0 = Fuzzing|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Fuzzing|x64.Build.0 = Fuzzing|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Fuzzing|x86.Build.0 = Fuzzing|Win32
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Release|ARM64.ActiveCfg = Release|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Release|ARM64.Build.0 = Release|ARM64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Release|x64.ActiveCfg = Release|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Release|x64.Build.0 = Release|x64
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Release|x86.ActiveCfg = Release|Win32
-		{A4394404-37F7-41C1-802B-49788D3720E3}.Release|x86.Build.0 = Release|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.AuditMode|x64.Build.0 = AuditMode|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Debug|ARM64.Build.0 = Debug|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Debug|x64.ActiveCfg = Debug|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Debug|x64.Build.0 = Debug|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Debug|x86.ActiveCfg = Debug|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Debug|x86.Build.0 = Debug|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Fuzzing|ARM64.Build.0 = Fuzzing|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Fuzzing|x64.Build.0 = Fuzzing|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Fuzzing|x86.Build.0 = Fuzzing|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Release|ARM64.ActiveCfg = Release|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Release|ARM64.Build.0 = Release|ARM64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Release|x64.ActiveCfg = Release|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Release|x64.Build.0 = Release|x64
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Release|x86.ActiveCfg = Release|Win32
-		{26C51792-41A3-4FE0-AB5E-8B69D557BF91}.Release|x86.Build.0 = Release|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.AuditMode|x64.Build.0 = AuditMode|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Debug|ARM64.Build.0 = Debug|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Debug|x64.ActiveCfg = Debug|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Debug|x64.Build.0 = Debug|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Debug|x86.ActiveCfg = Debug|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.Debug|x86.Build.0 = Debug|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Fuzzing|ARM64.Build.0 = Fuzzing|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Fuzzing|x64.Build.0 = Fuzzing|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.Fuzzing|x86.Build.0 = Fuzzing|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.Release|ARM64.ActiveCfg = Release|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Release|ARM64.Build.0 = Release|ARM64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Release|x64.ActiveCfg = Release|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Release|x64.Build.0 = Release|x64
-		{B4427499-9FDE-4208-B456-5BC580637633}.Release|x86.ActiveCfg = Release|Win32
-		{B4427499-9FDE-4208-B456-5BC580637633}.Release|x86.Build.0 = Release|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.AuditMode|x64.Build.0 = AuditMode|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Debug|ARM64.Build.0 = Debug|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Debug|x64.ActiveCfg = Debug|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Debug|x64.Build.0 = Debug|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Debug|x86.ActiveCfg = Debug|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Debug|x86.Build.0 = Debug|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Fuzzing|ARM64.Build.0 = Fuzzing|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Fuzzing|x64.Build.0 = Fuzzing|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Fuzzing|x86.Build.0 = Fuzzing|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Release|ARM64.ActiveCfg = Release|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Release|ARM64.Build.0 = Release|ARM64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Release|x64.ActiveCfg = Release|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Release|x64.Build.0 = Release|x64
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Release|x86.ActiveCfg = Release|Win32
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3}.Release|x86.Build.0 = Release|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.AuditMode|x64.Build.0 = AuditMode|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Debug|ARM64.Build.0 = Debug|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Debug|x64.ActiveCfg = Debug|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Debug|x64.Build.0 = Debug|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Debug|x86.ActiveCfg = Debug|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Debug|x86.Build.0 = Debug|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Fuzzing|ARM64.Build.0 = Fuzzing|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Fuzzing|x64.Build.0 = Fuzzing|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Fuzzing|x86.Build.0 = Fuzzing|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Release|ARM64.ActiveCfg = Release|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Release|ARM64.Build.0 = Release|ARM64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Release|x64.ActiveCfg = Release|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Release|x64.Build.0 = Release|x64
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Release|x86.ActiveCfg = Release|Win32
-		{18D09A24-8240-42D6-8CB6-236EEE820263}.Release|x86.Build.0 = Release|Win32
-	EndGlobalSection
-	GlobalSection(SolutionProperties) = preSolution
-		HideSolutionNode = FALSE
-	EndGlobalSection
-	GlobalSection(NestedProjects) = preSolution
-		{6BAE5851-50D5-4934-8D5E-30361A8A40F3} = {75AC9360-76FD-4ABC-AFEC-EF342BD2B3E9}
-		{18D09A24-8240-42D6-8CB6-236EEE820263} = {75AC9360-76FD-4ABC-AFEC-EF342BD2B3E9}
-	EndGlobalSection
-	GlobalSection(ExtensibilityGlobals) = postSolution
-		SolutionGuid = {05EAE315-9188-4D7B-B889-7D5F480A8915}
-	EndGlobalSection
-EndGlobal

XamlStyler.json

@@ -1,41 +0,0 @@
-{
-    "AttributesTolerance": 1,
-    "KeepFirstAttributeOnSameLine": true,
-    "MaxAttributeCharactersPerLine": 0,
-    "MaxAttributesPerLine": 1,
-    "NewlineExemptionElements": "RadialGradientBrush, GradientStop, LinearGradientBrush, ScaleTransform, SkewTransform, RotateTransform, TranslateTransform, Trigger, Condition, Setter",
-    "SeparateByGroups": false,
-    "AttributeIndentation": 0,
-    "AttributeIndentationStyle": 1,
-    "RemoveDesignTimeReferences":  false,
-    "EnableAttributeReordering": true,
-    "AttributeOrderingRuleGroups": [
-        "x:Class",
-        "xmlns, xmlns:x",
-        "xmlns:*",
-        "x:Key, Key, x:Name, Name, x:Uid, Uid, Title",
-        "Grid.Row, Grid.RowSpan, Grid.Column, Grid.ColumnSpan, Canvas.Left, Canvas.Top, Canvas.Right, Canvas.Bottom",
-        "Width, Height, MinWidth, MinHeight, MaxWidth, MaxHeight",
-        "Margin, Padding, HorizontalAlignment, VerticalAlignment, HorizontalContentAlignment, VerticalContentAlignment, Panel.ZIndex",
-        "*:*, *",
-        "PageSource, PageIndex, Offset, Color, TargetName, Property, Value, StartPoint, EndPoint",
-        "mc:Ignorable, d:IsDataSource, d:LayoutOverrides, d:IsStaticText",
-        "Storyboard.*, From, To, Duration"
-    ],
-    "FirstLineAttributes": "",
-    "OrderAttributesByName": true,
-    "PutEndingBracketOnNewLine": false,
-    "RemoveEndingTagOfEmptyElement": true,
-    "SpaceBeforeClosingSlash": true,
-    "RootElementLineBreakRule": 0,
-    "ReorderVSM": 2,
-    "ReorderGridChildren": false,
-    "ReorderCanvasChildren": false,
-    "ReorderSetters": 0,
-    "FormatMarkupExtension": true,
-    "NoNewLineMarkupExtensions": "x:Bind, Binding",
-    "ThicknessSeparator": 2,
-    "ThicknessAttributes": "Margin, Padding, BorderThickness, ThumbnailClipMargin",
-    "FormatOnSave": true,
-    "CommentPadding": 2,
-}

build/Fuzz/notifications-ado.json

@@ -1,34 +0,0 @@
-{
-  "config": {
-    "base_url": "https://dev.azure.com/microsoft/os",
-    "auth_token": "INSERT_PAT_HERE",
-    "project": "OpenConsole",
-    "type": "Bug",
-    "unique_fields": [
-      "Microsoft.VSTS.Common.CustomString03"
-    ],
-    "comment": "<a href='{{ input_url }}'>This input</a> caused the <a href='{{ target_url }}'>fuzz target</a> {{ report.executable }} to crash. The faulting input SHA256 hash is {{ report.input_sha256 }} <br>",
-    "ado_fields": {
-      "System.AssignedTo": "INSERT_ASSIGNED_HERE",
-      "System.Tags": "OneFuzz",
-      "System.AreaPath": "OS\\WDX\\DXP\\WinDev\\Terminal",
-      "OSG.Watson.Telemetry14DaysInMarketHits": "1",
-      "System.IterationPath": "OS\\Future",
-      "Microsoft.VSTS.Common.CustomString01": "{{ job.project }}",
-      "Microsoft.VSTS.Common.CustomString02": "{{ job.name }}",
-      "Microsoft.VSTS.Common.CustomString03": "{{ report.minimized_stack_function_lines_sha256}}",
-      "System.Title": "[Fuzzing] - {{ report.crash_site }}",
-      "Microsoft.VSTS.CMMI.HowFound": "Security: Fuzzing",
-      "OSG.SecurityImpact": "Security Triage Requested",
-      "OSG.SDLSeverity": "Moderate",
-      "Microsoft.VSTS.TCM.ReproSteps": "The fuzzing target ({{ job.project }} {{ job.name }} {{ job.build }}) reported a crash. <br> {%if report.asan_log %} AddressSanitizer reported the following details: <br> <pre> {{ report.asan_log }} </pre> {% else %} Faulting call stack: <ul> {% for item in report.call_stack %} <li> {{ item }} </li> {% endfor %} </ul> <br> {% endif %} You can reproduce the issue remotely in OneFuzz by running the following command: <pre> {{ repro_cmd }} </pre>"
-    },
-    "on_duplicate": {
-      "set_state": {"Resolved": "Active", "Closed": "Active"},
-      "ado_fields": {
-        "System.IterationPath": "OS\\Future"
-      },
-      "increment": ["OSG.Watson.Telemetry14DaysInMarketHits"]
-    }
-  }
-}

build/Helix/ConvertWttLogToXUnit.ps1

@@ -1,26 +0,0 @@
-Param(
-    [Parameter(Mandatory = $true)] 
-    [string]$WttInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$WttSingleRerunInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$WttMultipleRerunInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$XUnitOutputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$TestNamePrefix
-)
-
-# Ideally these would be passed as parameters to the script. However ps makes it difficult to deal with string literals containing '&', so we just 
-# read the values directly from the environment variables
-$helixResultsContainerUri = $Env:HELIX_RESULTS_CONTAINER_URI
-$helixResultsContainerRsas = $Env:HELIX_RESULTS_CONTAINER_RSAS
-
-Add-Type -Language CSharp -ReferencedAssemblies System.Xml,System.Xml.Linq,System.Runtime.Serialization,System.Runtime.Serialization.Json (Get-Content $PSScriptRoot\HelixTestHelpers.cs -Raw)
-
-$testResultParser = [HelixTestHelpers.TestResultParser]::new($TestNamePrefix, $helixResultsContainerUri, $helixResultsContainerRsas)
-$testResultParser.ConvertWttLogToXUnitLog($WttInputPath, $WttSingleRerunInputPath, $WttMultipleRerunInputPath, $XUnitOutputPath)

build/Helix/HelixTestHelpers.cs

@@ -1,647 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.IO;
-using System.Linq;
-using System.Runtime.Serialization;
-using System.Runtime.Serialization.Json;
-using System.Text;
-using System.Xml.Linq;
-
-namespace HelixTestHelpers
-{
-    public class TestResult
-    {
-        public TestResult()
-        {
-            Screenshots = new List<string>();
-            RerunResults = new List<TestResult>();
-        }
-
-        public string Name { get; set; }
-        public string SourceWttFile { get; set; }
-        public bool Passed { get; set; }
-        public bool Skipped { get; set; }
-        public bool CleanupPassed { get; set; }
-        public TimeSpan ExecutionTime { get; set; }
-        public string Details { get; set; }
-
-        public List<string> Screenshots { get; private set; }
-        public List<TestResult> RerunResults { get; private set; }
-    }
-    
-    //
-    // Azure DevOps doesn't currently provide a way to directly report sub-results for tests that failed at least once
-    // that were run multiple times.  To get around that limitation, we'll mark the test as "Skip" since
-    // that's the only non-pass/fail result we can return, and will then report the information about the
-    // runs in the "reason" category for the skipped test.  In order to save space, we'll make the following
-    // optimizations for size:
-    //
-    //   1. Serialize as JSON, which is more compact than XML;
-    //   2. Don't serialize values that we don't need;
-    //   3. Store the URL prefix and suffix for the blob storage URL only once instead of
-    //      storing every log and screenshot URL in its entirety; and
-    //   4. Store a list of unique error messages and then index into that instead of
-    //      storing every error message in its entirety.
-    //
-    // #4 is motivated by the fact that if a test fails multiple times, it probably failed for the same reason
-    // each time, in which case we'd just be repeating ourselves if we stored every error message each time.
-    //
-    // TODO (https://github.com/dotnet/arcade/issues/2773): Once we're able to directly report things in a
-    // more granular fashion than just a binary pass/fail result, we should do that.
-    //
-    [DataContract]  
-    internal class JsonSerializableTestResults
-    {  
-        [DataMember]
-        internal string blobPrefix;
-        
-        [DataMember]
-        internal string blobSuffix;
-        
-        [DataMember]
-        internal string[] errors;
-        
-        [DataMember]
-        internal JsonSerializableTestResult[] results;
-    }
-    
-    [DataContract]  
-    internal class JsonSerializableTestResult  
-    {
-        [DataMember]
-        internal string outcome;
-
-        [DataMember]
-        internal int duration;
-        
-        [DataMember(EmitDefaultValue = false)]
-        internal string log;
-        
-        [DataMember(EmitDefaultValue = false)]
-        internal string[] screenshots;
-        
-        [DataMember(EmitDefaultValue = false)]
-        internal int errorIndex;
-    }
-    
-    public class TestPass
-    {
-        public TimeSpan TestPassExecutionTime { get; set; }
-        public List<TestResult> TestResults { get; set; }
-        
-        public static TestPass ParseTestWttFile(string fileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
-        {
-            using (var stream = File.OpenRead(fileName))
-            {
-                var doc = XDocument.Load(stream);
-                var testResults = new List<TestResult>();
-                var testExecutionTimeMap = new Dictionary<string, List<double>>();
-
-                TestResult currentResult = null;
-                long frequency = 0;
-                long startTime = 0;
-                long stopTime = 0;
-                bool inTestCleanup = false;
-
-                bool shouldLogToTestDetails = false;
-
-                long testPassStartTime = 0;
-                long testPassStopTime = 0;
-
-                Func<XElement, bool> isScopeData = (elt) =>
-                {
-                    return
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                        (
-                            elt.Element("Data").Element("WexContext").Value == "Cleanup" ||
-                            elt.Element("Data").Element("WexContext").Value == "TestScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "TestScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "ClassScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "ModuleScope"
-                        );
-                };
-
-                Func<XElement, bool> isModuleOrClassScopeStart = (elt) =>
-                {
-                    return
-                        elt.Name == "Msg" &&
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("StartGroup") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                            (elt.Element("Data").Element("WexContext").Value == "ClassScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "ModuleScope");
-                };
-
-                Func<XElement, bool> isModuleScopeEnd = (elt) =>
-                {
-                    return
-                        elt.Name == "Msg" &&
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("EndGroup") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                        elt.Element("Data").Element("WexContext").Value == "ModuleScope";
-                };
-
-                Func<XElement, bool> isClassScopeEnd = (elt) =>
-                {
-                    return
-                        elt.Name == "Msg" &&
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("EndGroup") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                        elt.Element("Data").Element("WexContext").Value == "ClassScope";
-                };
-
-                int testsExecuting = 0;
-                foreach (XElement element in doc.Root.Elements())
-                {
-                    // Capturing the frequency data to record accurate
-                    // timing data.
-                    if (element.Name == "RTI")
-                    {
-                        frequency = Int64.Parse(element.Attribute("Frequency").Value);
-                    }
-
-                    // It's possible for a test to launch another test. If that happens, we won't modify the
-                    // current result. Instead, we'll continue operating like normal and expect that we get two
-                    // EndTests nodes before our next StartTests. We'll check that we've actually got a stop time
-                    // before creating a new result. This will result in the two results being squashed
-                    // into one result of the outer test that ran the inner one.
-                    if (element.Name == "StartTest")
-                    {
-                        testsExecuting++;
-                        if (testsExecuting == 1)
-                        {
-                            string testName = element.Attribute("Title").Value;
-                            
-                            if (truncateTestNames)
-                            {
-                                const string xamlNativePrefix = "Windows::UI::Xaml::Tests::";
-                                const string xamlManagedPrefix = "Windows.UI.Xaml.Tests.";
-                                if (testName.StartsWith(xamlNativePrefix))
-                                {
-                                    testName = testName.Substring(xamlNativePrefix.Length);
-                                }
-                                else if (testName.StartsWith(xamlManagedPrefix))
-                                {
-                                    testName = testName.Substring(xamlManagedPrefix.Length);
-                                }
-                            }
-
-                            currentResult = new TestResult() { Name = testName, SourceWttFile = fileName, Passed = true, CleanupPassed = true };
-                            testResults.Add(currentResult);
-                            startTime = Int64.Parse(element.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
-                            inTestCleanup = false;
-                            shouldLogToTestDetails = true;
-                            stopTime = 0;
-                        }
-                    }
-                    else if (currentResult != null && element.Name == "EndTest")
-                    {
-                        testsExecuting--;
-
-                        // If any inner test fails, we'll still fail the outer
-                        var value = element.Attribute("Result").Value;
-                        currentResult.Passed = value == "Pass";
-                        currentResult.Skipped = value == "Skipped";
-
-                        // Only gather execution data if this is the outer test we ran initially
-                        if (testsExecuting == 0)
-                        {
-                            stopTime = Int64.Parse(element.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
-                            if (!testExecutionTimeMap.Keys.Contains(currentResult.Name))
-                                testExecutionTimeMap[currentResult.Name] = new List<double>();
-                            testExecutionTimeMap[currentResult.Name].Add((double)(stopTime - startTime) / frequency);
-                            currentResult.ExecutionTime = TimeSpan.FromSeconds(testExecutionTimeMap[currentResult.Name].Average());
-
-                            startTime = 0;
-                            inTestCleanup = true;
-                        }
-                    }
-                    else if (currentResult != null &&
-                            (isModuleOrClassScopeStart(element) || isModuleScopeEnd(element) || isClassScopeEnd(element)))
-                    {
-                        shouldLogToTestDetails = false;
-                        inTestCleanup = false;
-                    }
-
-                    // Log-appending methods.
-                    if (currentResult != null && element.Name == "Error")
-                    {
-                        if (shouldLogToTestDetails)
-                        {
-                            currentResult.Details += "\r\n[Error]: " + element.Attribute("UserText").Value;
-                            if (element.Attribute("File") != null && element.Attribute("File").Value != "")
-                            {
-                                currentResult.Details += (" [File " + element.Attribute("File").Value);
-                                if (element.Attribute("Line") != null)
-                                    currentResult.Details += " Line: " + element.Attribute("Line").Value;
-                                currentResult.Details += "]";
-                            }
-                        }
-
-
-                        // The test cleanup errors will often come after the test claimed to have
-                        // 'passed'. We treat them as errors as well. 
-                        if (inTestCleanup)
-                        {
-                            currentResult.CleanupPassed = false;
-                            currentResult.Passed = false;
-                            // In stress mode runs, this test will run n times before cleanup is run. If the cleanup
-                            // fails, we want to fail every test.
-                            if (cleanupFailuresAreRegressions)
-                            {
-                                foreach (var result in testResults.Where(res => res.Name == currentResult.Name))
-                                {
-                                    result.Passed = false;
-                                    result.CleanupPassed = false;
-                                }
-                            }
-                        }
-                    }
-
-                    if (currentResult != null && element.Name == "Warn")
-                    {
-                        if (shouldLogToTestDetails)
-                        {
-                            currentResult.Details += "\r\n[Warn]: " + element.Attribute("UserText").Value;
-                        }
-
-                        if (element.Attribute("File") != null && element.Attribute("File").Value != "")
-                        {
-                            currentResult.Details += (" [File " + element.Attribute("File").Value);
-                            if (element.Attribute("Line") != null)
-                                currentResult.Details += " Line: " + element.Attribute("Line").Value;
-                            currentResult.Details += "]";
-                        }
-                    }
-
-                    if (currentResult != null && element.Name == "Msg")
-                    {
-                        var dataElement = element.Element("Data");
-                        if (dataElement != null)
-                        {
-                            var supportingInfo = dataElement.Element("SupportingInfo");
-                            if (supportingInfo != null)
-                            {
-                                var screenshots = supportingInfo.Elements("Item")
-                                    .Where(item => GetAttributeValue(item, "Name") == "Screenshot")
-                                    .Select(item => GetAttributeValue(item, "Value"));
-
-                                foreach(var screenshot in screenshots)
-                                {
-                                    string fileNameSuffix = string.Empty;
-                                    
-                                    if (fileName.Contains("_rerun_multiple"))
-                                    {
-                                        fileNameSuffix = "_rerun_multiple";
-                                    }
-                                    else if (fileName.Contains("_rerun"))
-                                    {
-                                        fileNameSuffix = "_rerun";
-                                    }
-                                    
-                                    currentResult.Screenshots.Add(screenshot.Replace(".jpg", fileNameSuffix + ".jpg"));
-                                }
-                            }
-                        }
-                    }
-                }
-
-                testPassStartTime = Int64.Parse(doc.Root.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
-                testPassStopTime = Int64.Parse(doc.Root.Descendants("WexTraceInfo").Last().Attribute("TimeStamp").Value);
-
-                var testPassTime = TimeSpan.FromSeconds((double)(testPassStopTime - testPassStartTime) / frequency);
-                
-                foreach (TestResult testResult in testResults)
-                {
-                    if (testResult.Details != null)
-                    {
-                        testResult.Details = testResult.Details.Trim();
-                    }
-                }
-
-                var testpass = new TestPass
-                {
-                    TestPassExecutionTime = testPassTime,
-                    TestResults = testResults
-                };
-
-                return testpass;
-            }
-        }
-        
-        public static TestPass ParseTestWttFileWithReruns(string fileName, string singleRerunFileName, string multipleRerunFileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
-        {
-            TestPass testPass = ParseTestWttFile(fileName, cleanupFailuresAreRegressions, truncateTestNames);
-            TestPass singleRerunTestPass = File.Exists(singleRerunFileName) ? ParseTestWttFile(singleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
-            TestPass multipleRerunTestPass = File.Exists(multipleRerunFileName) ? ParseTestWttFile(multipleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
-            
-            List<TestResult> rerunTestResults = new List<TestResult>();
-
-            if (singleRerunTestPass != null)
-            {
-                rerunTestResults.AddRange(singleRerunTestPass.TestResults);
-            }
-
-            if (multipleRerunTestPass != null)
-            {
-                rerunTestResults.AddRange(multipleRerunTestPass.TestResults);
-            }
-
-            // For each failed test result, we'll check to see whether the test passed at least once upon rerun.
-            // If so, we'll set PassedOnRerun to true to flag the fact that this is an unreliable test
-            // rather than a genuine test failure.
-            foreach (TestResult failedTestResult in testPass.TestResults.Where(r => !r.Passed))
-            {
-                failedTestResult.RerunResults.AddRange(rerunTestResults.Where(r => r.Name == failedTestResult.Name));
-            }
-
-            return testPass;
-        }
-
-        private static string GetAttributeValue(XElement element, string attributeName)
-        {
-            if(element.Attribute(attributeName) != null)
-            {
-                return element.Attribute(attributeName).Value;
-            }
-
-            return null;
-        }
-    }
-
-    public static class FailedTestDetector
-    {
-        public static void OutputFailedTestQuery(string wttInputPath)
-        {
-            var testPass = TestPass.ParseTestWttFile(wttInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            
-            List<string> failedTestNames = new List<string>();
-            
-            foreach (var result in testPass.TestResults)
-            {
-                if (!result.Passed)
-                {
-                    failedTestNames.Add(result.Name);
-                }
-            }
-            
-            if (failedTestNames.Count > 0)
-            {
-                string failedTestSelectQuery = "(@Name='";
-                
-                for (int i = 0; i < failedTestNames.Count; i++)
-                {
-                    failedTestSelectQuery += failedTestNames[i];
-                    
-                    if (i < failedTestNames.Count - 1)
-                    {
-                        failedTestSelectQuery += "' or @Name='";
-                    }
-                }
-                
-                failedTestSelectQuery += "')";
-            
-                Console.WriteLine(failedTestSelectQuery);
-            }
-            else
-            {
-                Console.WriteLine("");
-            }
-        }
-    }
-
-    public class TestResultParser
-    {
-        private string testNamePrefix;
-        private string helixResultsContainerUri;
-        private string helixResultsContainerRsas;
-    
-        public TestResultParser(string testNamePrefix, string helixResultsContainerUri, string helixResultsContainerRsas)
-        {
-            this.testNamePrefix = testNamePrefix;
-            this.helixResultsContainerUri = helixResultsContainerUri;
-            this.helixResultsContainerRsas = helixResultsContainerRsas;
-        }
-
-        public Dictionary<string, string> GetSubResultsJsonByMethodName(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath)
-        {
-            Dictionary<string, string> subResultsJsonByMethod = new Dictionary<string, string>();
-            TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            
-            foreach (var result in testPass.TestResults)
-            {
-                var methodName = result.Name.Substring(result.Name.LastIndexOf('.') + 1);
-
-                if (!result.Passed)
-                {
-                    // If a test failed, we'll have rerun it multiple times.  We'll record the results of each run
-                    // formatted as JSON.
-                    JsonSerializableTestResults serializableResults = new JsonSerializableTestResults();
-                    serializableResults.blobPrefix = helixResultsContainerUri;
-                    serializableResults.blobSuffix = helixResultsContainerRsas;
-
-                    List<string> errorList = new List<string>();
-                    errorList.Add(result.Details);
-
-                    foreach (TestResult rerunResult in result.RerunResults)
-                    {
-                        errorList.Add(rerunResult.Details);
-                    }
-
-                    serializableResults.errors = errorList.Distinct().Where(s => s != null).ToArray();
-
-                    var reason = new XElement("reason");
-                    List<JsonSerializableTestResult> serializableResultList = new List<JsonSerializableTestResult>();
-                    serializableResultList.Add(ConvertToSerializableResult(result, serializableResults.errors));
-
-                    foreach (TestResult rerunResult in result.RerunResults)
-                    {
-                        serializableResultList.Add(ConvertToSerializableResult(rerunResult, serializableResults.errors));
-                    }
-
-                    serializableResults.results = serializableResultList.ToArray();
-
-                    using (MemoryStream stream = new MemoryStream())
-                    {
-                        DataContractJsonSerializer serializer = new DataContractJsonSerializer(typeof(JsonSerializableTestResults));
-                        serializer.WriteObject(stream, serializableResults);
-                        stream.Position = 0;
-
-                        using (StreamReader streamReader = new StreamReader(stream))
-                        {
-                            subResultsJsonByMethod.Add(methodName, streamReader.ReadToEnd());
-                        }
-                    }
-                }
-            }
-
-            return subResultsJsonByMethod;
-        }
-
-        public void ConvertWttLogToXUnitLog(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath, string xunitOutputPath)
-        {
-            TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            var results = testPass.TestResults;
-
-            int resultCount = results.Count;
-            int passedCount = results.Where(r => r.Passed).Count();
-            
-            // Since we re-run tests on failure, we'll mark every test that failed at least once as "skipped" rather than "failed".
-            // If the test failed sufficiently often enough for it to count as a failed test (determined by a property on the
-            // Azure DevOps job), we'll later mark it as failed during test results processing.
-
-            int failedCount = results.Where(r => !r.Passed).Count();
-            int skippedCount = results.Where(r => (!r.Passed && r.Skipped)).Count();
-
-            var root = new XElement("assemblies");
-
-            var assembly = new XElement("assembly");
-            assembly.SetAttributeValue("name", "MUXControls.Test.dll");
-            assembly.SetAttributeValue("test-framework", "TAEF");
-            assembly.SetAttributeValue("run-date", DateTime.Now.ToString("yyyy-MM-dd"));
-
-            // This doesn't need to be completely accurate since it's not exposed anywhere.
-            // If we need accurate an start time we can probably calculate it from the te.wtl file, but for
-            // now this is fine.
-            assembly.SetAttributeValue("run-time", (DateTime.Now - testPass.TestPassExecutionTime).ToString("hh:mm:ss"));
-            
-            assembly.SetAttributeValue("total", resultCount);
-            assembly.SetAttributeValue("passed", passedCount);
-            assembly.SetAttributeValue("failed", failedCount);
-            assembly.SetAttributeValue("skipped", skippedCount);
-            
-            assembly.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
-            assembly.SetAttributeValue("errors", 0);
-            root.Add(assembly);
-
-            var collection = new XElement("collection");
-            collection.SetAttributeValue("total", resultCount);
-            collection.SetAttributeValue("passed", passedCount);
-            collection.SetAttributeValue("failed", failedCount);
-            collection.SetAttributeValue("skipped", skippedCount);
-            collection.SetAttributeValue("name", "Test collection");
-            collection.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
-            assembly.Add(collection);
-
-            foreach (var result in results)
-            {
-                var test = new XElement("test");
-                test.SetAttributeValue("name", testNamePrefix + "." + result.Name);
-
-                var className = GetTestClassName(result.Name);
-                var methodName = GetTestMethodName(result.Name);
-                test.SetAttributeValue("type", className);
-                test.SetAttributeValue("method", methodName);
-
-                test.SetAttributeValue("time", result.ExecutionTime.TotalSeconds);
-                
-                string resultString = string.Empty;
-                
-                if (result.Passed && !result.Skipped)
-                {
-                    resultString = "Pass";
-                }
-                else if (result.Skipped)
-                {
-
-                    resultString = "Skip";
-                }
-                else
-                {
-                    resultString = "Fail";
-                }
-
-                
-                if (!result.Passed)
-                {
-                    if (result.Skipped)
-                    {
-                        var reason = new XElement("reason");
-                        reason.Add(new XCData("Test skipped"));
-                        test.Add(reason);
-                    }
-                    else {
-                        var failure = new XElement("failure");
-                        var message = new XElement("message");
-                        message.Add(new XCData("Test failed"));
-                        failure.Add(message);
-                        test.Add(failure);
-                    }
-                }
-
-                test.SetAttributeValue("result", resultString);
-
-                collection.Add(test);
-            }
-
-            File.WriteAllText(xunitOutputPath, root.ToString());
-        }
-        
-        private JsonSerializableTestResult ConvertToSerializableResult(TestResult rerunResult, string[] uniqueErrors)
-        {
-            var serializableResult = new JsonSerializableTestResult();
-            
-            serializableResult.outcome = rerunResult.Passed ? "Passed" : "Failed";
-            serializableResult.duration = (int)Math.Round(rerunResult.ExecutionTime.TotalMilliseconds);
-            
-            if (!rerunResult.Passed)
-            {
-                serializableResult.log = Path.GetFileName(rerunResult.SourceWttFile);
-                
-                if (rerunResult.Screenshots.Any())
-                {
-                    List<string> screenshots = new List<string>();
-                    
-                    foreach (var screenshot in rerunResult.Screenshots)
-                    {
-                        screenshots.Add(Path.GetFileName(screenshot));
-                    }
-                    
-                    serializableResult.screenshots = screenshots.ToArray();
-                }
-                
-                // To conserve space, we'll log the index of the error to index in a list of unique errors rather than
-                // jotting down every single error in its entirety. We'll add one to the result so we can avoid
-                // serializing this property when it has the default value of 0.
-                serializableResult.errorIndex = Array.IndexOf(uniqueErrors, rerunResult.Details) + 1;
-            }
-            
-            return serializableResult;
-        }
-
-        private string GetUploadedFileUrl(string filePath, string helixResultsContainerUri, string helixResultsContainerRsas)
-        {
-            var filename = Path.GetFileName(filePath);
-            return string.Format("{0}/{1}{2}", helixResultsContainerUri, filename, helixResultsContainerRsas);
-        }
-		
-		private string GetTestNameSeparator(string testname)
-        {
-            var separatorString = ".";
-            if (!testname.Contains(separatorString))
-            {
-                separatorString = "::";
-            }
-            return separatorString;
-        }
-
-        private string GetTestMethodName(string fullyQualifiedName)
-        {
-            var separatorString = GetTestNameSeparator(fullyQualifiedName);
-            var methodName = fullyQualifiedName.Substring(fullyQualifiedName.LastIndexOf(separatorString) + separatorString.Length);
-
-            return methodName;
-        }
-
-        private string GetTestClassName(string fullyQualifiedName)
-        {
-            var separatorString = GetTestNameSeparator(fullyQualifiedName);
-            var className = fullyQualifiedName.Substring(0, fullyQualifiedName.LastIndexOf(separatorString));
-
-            return className;
-        }
-    }
-}

build/Helix/OutputTestErrorsForAzureDevops.ps1

@@ -1,38 +0,0 @@
-Param(
-    [Parameter(Mandatory = $true)]
-    [string]$XUnitOutputPath
-)
-
-# This script is used to parse the XUnit output from the test runs and print out
-# the tests that failed.
-#
-# Why you might ask? Well, it sure seems like Azure DevOps doesn't like the fact
-# that we just call our tests in a powershell script. It can't seemingly find
-# the actual errors in the TAEF logs. That means when you just go to the
-# "Checks" page on GitHub, the Azure DevOps integration doesn't have anything
-# meaningful to say other than "PowerShell exited with code '1'". If we however,
-# just manually emit the test names formatted with "#[error]" in front of them,
-# well, then the integration will all work like magic.
-
-# Load the test results as a XML object
-$testResults = [xml](Get-Content -Path $XUnitOutputPath)
-
-# Our XML looks like:
-# <assemblies>
-#   <assembly name="MUXControls.Test.dll" test-framework="TAEF" run-date="2023-08-14" run-time="11:38:01" total="524" passed="520" failed="4" skipped="1" time="8943" errors="0">
-#     <collection total="524" passed="520" failed="4" skipped="1" name="Test collection" time="8943">
-#       <test name="ControlCoreTests::TestSimpleClickSelection" type="ControlCoreTests" method="TestSimpleClickSelection" time="0.016" result="Fail">
-
-# Iterate over all the assemblies and print all the tests that failed
-foreach ($assembly in $testResults.assemblies.assembly) {
-    foreach ($collection in $assembly.collection) {
-        foreach ($test in $collection.test) {
-            if ($test.result -eq "Fail") {
-                # This particular format is taken from the Azure DevOps documentation:
-                # https://github.com/microsoft/azure-pipelines-tasks/blob/master/docs/authoring/commands.md
-                # This will treat this line as an error message
-                Write-Output "##vso[task.logissue type=error]$($test.name) Failed"
-            }
-        }
-    }
-}

build/config/GitCheckin.json

@@ -1,24 +0,0 @@
-{
-    "Branch": [
-      {
-        "collection": "microsoft",
-        "project": "OS",
-        "repo": "os.2020",
-        "name": "official/rs_we_adept_e4d2",
-        "workitem": "38106206",
-        "CheckinFiles": [
-          {
-            "source": "WindowsTerminal.app.man",
-            "path": "/redist/mspartners/ipa/WindowsTerminal",
-            "type": "File"
-          }
-        ]
-      }
-    ],
-    "Email": [
-      {
-        "sendTo": "condev",
-        "sendOnErrorOnly": "False"
-      }
-    ]
-  }

build/config/LocConfig.xml

@@ -1,15 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Modules>
-  <Module name="Microsoft.WindowsTerminal" tdbuildteamid="7105">
-    <File location="TerminalApp"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalApp\Resources\en-US\Resources.resw" />
-    <File location="TerminalControl"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalControl\Resources\en-US\Resources.resw" />
-    <File location="TerminalConnection"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalConnection\Resources\en-US\Resources.resw" />
-    <File location="WindowsTerminalUniversal"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\WindowsTerminalUniversal\Resources\en-US\Resources.resw" />
-    <File location="CascadiaPackage"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\CascadiaPackage\Resources\en-US\Resources.resw" />
-  </Module>
-</Modules>

build/config/PolicheckExclusions.xml

@@ -1,11 +0,0 @@
-<PoliCheckExclusions>
-  <!-- All strings must be UPPER CASE -->
-  <!--Each of these exclusions is a folder name -if \[name]\exists in the file path, it will be skipped -->
-  <Exclusion Type="FolderPathFull">winrt|.git|oss|packages</Exclusion>
-  <!--Each of these exclusions is a folder name -if any folder or file starts with "\[name]", it will be skipped -->
-  <!--<Exclusion Type="FolderPathStart">ABC|XYZ</Exclusion>-->
-  <!--Each of these file types will be completely skipped for the entire scan -->
-  <Exclusion Type="FileType">.PNG|.SVG|.BMP|.ICO</Exclusion>
-  <!--The specified file names will be skipped during the scan regardless which folder they are in -->
-  <!--<Exclusion Type="FileName">ABC.TXT|XYZ.CS</Exclusion>-->
-</PoliCheckExclusions>

build/config/SignConfig.NuGet.xml

@@ -0,0 +1,5 @@
+<SignConfigXML>
+  <job platform="" configuration="" dest="__INPATHROOT__" jobname="EngFunSimpleSign" approvers="">
+   <file src="__INPATHROOT__\Microsoft.Terminal*.nupkg" signType="NuGet" /> 
+  </job>
+</SignConfigXML>

build/config/SignConfig.WindowsTerminal.xml

@@ -0,0 +1,6 @@
+<SignConfigXML>
+  <job platform="" configuration="" certSubject="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" jobname="EngFunSimpleSign" approvers="">
+   <file src="__INPATHROOT__\Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle" signType="136020001" dest="__OUTPATHROOT__\Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle" /> 
+   <file src="__INPATHROOT__\Microsoft.WindowsTerminalUniversal_8wekyb3d8bbwe.msixbundle" signType="136020001" dest="__OUTPATHROOT__\Microsoft.WindowsTerminalUniversal_8wekyb3d8bbwe.msixbundle" /> 
+  </job>
+</SignConfigXML>

build/config/esrp.build.batch.conpty.json

@@ -1,47 +0,0 @@
-[
-    {
-        "MatchedPath": [
-            "conpty.dll",
-            "OpenConsole.exe"
-        ],
-        "SigningInfo": {
-            "Operations": [
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolSign",
-                    "Parameters": [
-                        {
-                            "parameterName": "OpusName",
-                            "parameterValue": "Microsoft"
-                        },
-                        {
-                            "parameterName": "OpusInfo",
-                            "parameterValue": "http://www.microsoft.com"
-                        },
-                        {
-                            "parameterName": "FileDigest",
-                            "parameterValue": "/fd \"SHA256\""
-                        },
-                        {
-                            "parameterName": "PageHash",
-                            "parameterValue": "/NPH"
-                        },
-                        {
-                            "parameterName": "TimeStamp",
-                            "parameterValue": "/tr \"http://rfc3161.gtm.corp.microsoft.com/TSS/HttpTspServer\" /td sha256"
-                        }
-                    ],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                },
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolVerify",
-                    "Parameters": [],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                }
-            ]
-        }
-    }
-]

build/config/esrp.build.batch.terminal_constituents.json

@@ -1,65 +0,0 @@
-[
-    {
-        "MatchedPath": [
-            // Namespaced DLLs
-            "PackageContents/Microsoft.Terminal.*.dll",
-            "PackageContents/Microsoft.Terminal.*.winmd",
-
-            // ConPTY and DefTerm
-            "PackageContents/OpenConsole.exe",
-            "PackageContents/OpenConsoleProxy.dll",
-
-            // Legacy DLLs with old names
-            "PackageContents/TerminalApp.dll",
-            "PackageContents/TerminalApp.winmd",
-            "PackageContents/TerminalConnection.dll",
-            "PackageContents/TerminalThemeHelpers.dll",
-            "PackageContents/WindowsTerminalShellExt.dll",
-
-            // The rest
-            "PackageContents/TerminalAzBridge.exe",
-            "PackageContents/wt.exe",
-            "PackageContents/WindowsTerminal.exe",
-            "PackageContents/elevate-shim.exe"
-        ],
-        "SigningInfo": {
-            "Operations": [
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolSign",
-                    "Parameters": [
-                        {
-                            "parameterName": "OpusName",
-                            "parameterValue": "Microsoft"
-                        },
-                        {
-                            "parameterName": "OpusInfo",
-                            "parameterValue": "http://www.microsoft.com"
-                        },
-                        {
-                            "parameterName": "FileDigest",
-                            "parameterValue": "/fd \"SHA256\""
-                        },
-                        {
-                            "parameterName": "PageHash",
-                            "parameterValue": "/NPH"
-                        },
-                        {
-                            "parameterName": "TimeStamp",
-                            "parameterValue": "/tr \"http://rfc3161.gtm.corp.microsoft.com/TSS/HttpTspServer\" /td sha256"
-                        }
-                    ],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                },
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolVerify",
-                    "Parameters": [],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                }
-            ]
-        }
-    }
-]

build/config/esrp.build.batch.wpf.json

@@ -1,46 +0,0 @@
-[
-    {
-        "MatchedPath": [
-            "Microsoft.Terminal.Control/Microsoft.Terminal.Control.dll"
-        ],
-        "SigningInfo": {
-            "Operations": [
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolSign",
-                    "Parameters": [
-                        {
-                            "parameterName": "OpusName",
-                            "parameterValue": "Microsoft"
-                        },
-                        {
-                            "parameterName": "OpusInfo",
-                            "parameterValue": "http://www.microsoft.com"
-                        },
-                        {
-                            "parameterName": "FileDigest",
-                            "parameterValue": "/fd \"SHA256\""
-                        },
-                        {
-                            "parameterName": "PageHash",
-                            "parameterValue": "/NPH"
-                        },
-                        {
-                            "parameterName": "TimeStamp",
-                            "parameterValue": "/tr \"http://rfc3161.gtm.corp.microsoft.com/TSS/HttpTspServer\" /td sha256"
-                        }
-                    ],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                },
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolVerify",
-                    "Parameters": [],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                }
-            ]
-        }
-    }
-]

build/config/esrp.build.batch.wpfdotnet.json

@@ -1,47 +0,0 @@
-[
-    {
-        "MatchedPath": [
-            "WpfTerminalControl/net472/Microsoft.Terminal.Wpf.dll",
-            "WpfTerminalControl/net6.0-windows/Microsoft.Terminal.Wpf.dll"
-        ],
-        "SigningInfo": {
-            "Operations": [
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolSign",
-                    "Parameters": [
-                        {
-                            "parameterName": "OpusName",
-                            "parameterValue": "Microsoft"
-                        },
-                        {
-                            "parameterName": "OpusInfo",
-                            "parameterValue": "http://www.microsoft.com"
-                        },
-                        {
-                            "parameterName": "FileDigest",
-                            "parameterValue": "/fd \"SHA256\""
-                        },
-                        {
-                            "parameterName": "PageHash",
-                            "parameterValue": "/NPH"
-                        },
-                        {
-                            "parameterName": "TimeStamp",
-                            "parameterValue": "/tr \"http://rfc3161.gtm.corp.microsoft.com/TSS/HttpTspServer\" /td sha256"
-                        }
-                    ],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                },
-                {
-                    "KeyCode": "CP-230012",
-                    "OperationSetCode": "SigntoolVerify",
-                    "Parameters": [],
-                    "ToolName": "sign",
-                    "ToolVersion": "1.0"
-                }
-            ]
-        }
-    }
-]

build/config/template.appinstaller

@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<AppInstaller
-  xmlns="http://schemas.microsoft.com/appx/appinstaller/2017/2"
-  Version="1.0.0.0"
-  Uri="$$ROOT$$$$NAME$$.appinstaller">
-
-  <MainBundle
-    Name="$$NAME$$"
-    Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
-    Version="$$VERSION$$"
-    Uri="$$ROOT$$$$PACKAGE$$" />
-
-  <Dependencies>
-    <Package
-      Name="Microsoft.UI.Xaml.2.8"
-      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
-      Version="8.2305.5001.0"
-      ProcessorArchitecture="x64"
-      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x64.appx" />
-    <Package
-      Name="Microsoft.UI.Xaml.2.8"
-      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
-      Version="8.2305.5001.0"
-      ProcessorArchitecture="x86"
-      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x86.appx" />
-    <Package
-      Name="Microsoft.UI.Xaml.2.8"
-      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
-      Version="8.2305.5001.0"
-      ProcessorArchitecture="arm64"
-      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.arm64.appx" />
-  </Dependencies>
-
-  <UpdateSettings>
-    <OnLaunch
-      HoursBetweenUpdateChecks="6" />
-  </UpdateSettings>
-</AppInstaller>

build/config/tsa.json

@@ -1,6 +0,0 @@
-{
-    "instanceUrl": "https://microsoft.visualstudio.com",
-    "projectName": "OS",
-    "areaPath": "OS\\Windows Client and Services\\ADEPT\\E4D-Engineered for Developers\\SHINE\\Terminal",
-    "notificationAliases": ["condev@microsoft.com", "duhowett@microsoft.com"]
-}

build/packages.config

@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<packages>
-  <package id="MUXCustomBuildTasks" version="1.0.48" targetFramework="native" />
-  <package id="Microsoft.Taef" version="10.60.210621002" targetFramework="native" />
-  <package id="Microsoft.Internal.PGO-Helpers.Cpp" version="0.2.34" targetFramework="native" />
-  <package id="Microsoft.Debugging.Tools.PdbStr" version="20220617.1556.0" targetFramework="native" />
-  <package id="Microsoft.Debugging.Tools.SrcTool" version="20220617.1556.0" targetFramework="native" />
-</packages>

build/pgo/PGO.DB.proj

@@ -1,5 +0,0 @@
-<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <Import Project="Terminal.PGO.props" />
-  <Import Project="$(PkgMicrosoft_PGO_Helpers_Cpp)\build\Microsoft.PGO-Helpers.Cpp.props" />
-  <Import Project="$(PkgMicrosoft_PGO_Helpers_Cpp)\build\Microsoft.PGO-Helpers.Cpp.targets" />
-</Project>

build/pgo/Terminal.PGO.DB.nuspec

@@ -1,17 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<package xmlns="http://schemas.microsoft.com/packaging/2010/07/nuspec.xsd">
-  <metadata>
-    <id>Microsoft.Internal.Windows.Terminal.PGODatabase</id>
-    <version>0</version>
-    <title>Windows Terminal PGO Database</title>
-    <authors>Microsoft</authors>
-    <owners>Microsoft</owners>
-    <requireLicenseAcceptance>false</requireLicenseAcceptance>
-    <description>Windows Terminal PGO Database</description>
-  </metadata>
-  <files>
-    <!-- The target directories for pgd files need to remain as is.  PGO optimization pass will rely on this exact directory layout. -->
-    <file src="x64\*.pgd" target="tools\x64"/>
-    <file src="arm64\*.pgd" target="tools\arm64"/>
-  </files>
-</package>

build/pgo/Terminal.PGO.props

@@ -1,50 +0,0 @@
-<Project>
-  <PropertyGroup>
-    <NuGetPackageDirectory>$(MSBuildThisFileDirectory)..\..\packages</NuGetPackageDirectory>
-    <PkgMicrosoft_PGO_Helpers_Cpp>$(NuGetPackageDirectory)\Microsoft.Internal.PGO-Helpers.Cpp.0.2.34</PkgMicrosoft_PGO_Helpers_Cpp>
-  </PropertyGroup>
-
-  <!-- Get version information -->
-  <Import Project="$(MSBuildThisFileDirectory)..\..\custom.props" />
-
-  <PropertyGroup>
-    <!-- Optional, defaults to main.  Name of the branch which will be used for calculating branch point. -->
-    <PGOBranch>main</PGOBranch>
-
-    <!-- Mandatory.  Name of the NuGet package which will contain PGO databases for consumption by build system. -->
-    <PGOPackageName>Microsoft.Internal.Windows.Terminal.PGODatabase</PGOPackageName>
-
-    <!-- Mandatory.  Major version number of the PGO database which should match the version of the product.  This can be hard-coded or obtained from other sources in build system. -->
-    <PGOPackageVersionMajor>$(VersionMajor)</PGOPackageVersionMajor>
-
-    <!-- Mandatory.  Minor version number of the PGO database which should match the version of the product.  This can be hard-coded or obtained from other sources in build system. -->
-    <PGOPackageVersionMinor>$(VersionMinor)</PGOPackageVersionMinor>
-
-    <!-- Mandatory, defaults to 0.  Patch version number of the PGO database which should match the version of the product.  This can be hard-coded or obtained from other sources in build system. -->
-    <PGOPackageVersionPatch>0</PGOPackageVersionPatch>
-    
-    <!-- Optional, defaults to empty.  Prerelease version number of the PGO database which should match the version of the product.  This can be hard-coded or obtained from other sources in build system. -->
-    <PGOPackageVersionPrerelease></PGOPackageVersionPrerelease>
-
-    <!-- Mandatory.  Path to nuget.config file for the project.  Path is relative to where the props file will be. -->
-    <PGONuGetConfigPath>$(MSBuildThisFileDirectory)..\..\nuget.config</PGONuGetConfigPath>
-
-    <!-- Mandatory.  Path to PGO database NuSpec, see section below. -->
-    <PGONuspecPath>$(MSBuildThisFileDirectory)Terminal.PGO.DB.nuspec</PGONuspecPath>
-
-    <!-- Optional, defaults to true.  Should verification result in build failure or error? -->
-    <PGOVerifyFailureTreatedAsError>true</PGOVerifyFailureTreatedAsError>
-
-    <!-- Optional, defaults to $(IntDir)\Nuspec.  Temporary path where PGD files are copied to. -->
-    <PGONuspecBasePath>$(PGDPathForAllArch)</PGONuspecBasePath>
-
-    <!-- Optional, defaults to true.  Specifies whether to use default information for PGD files. -->
-    <PGOUseDefaultPGDFileInfo>true</PGOUseDefaultPGDFileInfo>
-
-    <!-- Copying the PGO runtime brings along a CRT. If we do that under normal circumstances, WAPPROJ will get its grubby hands on it and mess up all the CRT shenanigans we have to pull to make MSIX packages happy. So only pull it in for Instrument builds.-->
-    <PGOCopyRuntime>false</PGOCopyRuntime>
-    <PGOCopyRuntime Condition="'$(PGOBuildMode)' == 'Instrument'">true</PGOCopyRuntime>
-  </PropertyGroup>
-
-  <!-- Do not import PGO-Helpers props here, as it is too early to detect the C++ tools directory -->
-</Project>

build/pipelines/ci.yml

@@ -2,8 +2,7 @@ trigger:
   batch: true
   branches:
     include:
-      - main
-      - feature/*
+      - master
   paths:
     exclude:
       - doc/*
@@ -13,8 +12,7 @@ trigger:
 pr:
   branches:
     include:
-      - main
-      - feature/*
+      - master
   paths:
     exclude:
       - doc/*
@@ -29,80 +27,21 @@ variables:
 #     0.0.1904.0900
 name: 0.0.$(Date:yyMM).$(Date:dd)$(Rev:rr)
 
-parameters:
-  - name: auditMode
-    displayName: "Build in Audit Mode (x64)"
-    type: boolean
-    default: true
-  - name: runTests
-    displayName: "Run Tests"
-    type: boolean
-    default: true
-  - name: buildPlatforms
-    type: object
-    default:
-      - x64
-      - x86
-      - arm64
+jobs:
+  - template: ./templates/build-console-audit-job.yml
+    parameters:
+      platform: x64
 
-stages:
-  - ${{ if eq(parameters.auditMode, true) }}:
-    - stage: Audit_x64
-      displayName: Audit Mode
-      dependsOn: []
-      jobs:
-        - template: ./templates-v2/job-build-project.yml
-          parameters:
-            pool:
-              ${{ if eq(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-                name: SHINE-OSS-L
-              ${{ if ne(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-                name: SHINE-INT-L
-            buildPlatforms: [x64]
-            buildConfigurations: [AuditMode]
-            buildEverything: true
-            keepAllExpensiveBuildOutputs: false
+  - template: ./templates/build-console-ci.yml
+    parameters:
+      platform: x64
 
-  - stage: CodeHealth
-    displayName: Code Health
-    dependsOn: []
-    jobs:
-      - template: ./templates-v2/job-check-code-format.yml
+  - template: ./templates/build-console-ci.yml
+    parameters:
+      platform: x86
 
-  - ${{ each platform in parameters.buildPlatforms }}:
-    - stage: Build_${{ platform }}
-      displayName: Build ${{ platform }}
-      dependsOn: []
-      jobs:
-        - template: ./templates-v2/job-build-project.yml
-          parameters:
-            pool:
-              ${{ if eq(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-                name: SHINE-OSS-L
-              ${{ if ne(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-                name: SHINE-INT-L
-            buildPlatforms:
-              - ${{ platform }}
-            buildConfigurations: [Release]
-            buildEverything: true
-            keepAllExpensiveBuildOutputs: false
+  - template: ./templates/build-console-ci.yml
+    parameters:
+      platform: ARM64
 
-    - ${{ if eq(parameters.runTests, true) }}:
-      - stage: Test_${{ platform }}
-        displayName: Test ${{ platform }}
-        dependsOn:
-          - Build_${{ platform }}
-        condition: succeeded()
-        jobs:
-          - template: ./templates-v2/job-test-project.yml
-            parameters:
-              platform: ${{ platform }}
-              # The tests might be run more than once; log one artifact per attempt.
-              outputArtifactStem: -$(System.JobAttempt)
-
-  - ${{ if ne(variables['Build.Reason'], 'PullRequest') }}:
-    - stage: CodeIndexer
-      displayName: GitHub CodeNav Indexer
-      dependsOn: []
-      jobs:
-        - template: ./templates-v2/job-index-github-codenav.yml
+  - template: ./templates/check-formatting.yml

build/pipelines/daily-loc-submission.yml

@@ -1,63 +0,0 @@
-trigger: none
-pr: none
-schedules:
-  - cron: "0 3 * * 2-6" # Run at 03:00 UTC Tuesday through Saturday (After the work day in Pacific, Mon-Fri)
-    displayName: "Nightly Localization Build"
-    branches:
-      include:
-        - main
-    always: false # only run if there's code changes!
-
-pool:
-  vmImage: windows-2019
-
-resources:
-  repositories:
-  - repository: self
-    type: git
-    ref: main
-  - repository: internal
-    type: git
-    name: Terminal.Internal
-    ref: main
-
-steps:
-
-- checkout: self
-  clean: true
-  submodules: false
-  fetchDepth: 1 # Don't need a deep checkout for loc files!
-  fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-  persistCredentials: true
-  path: s # Adding a second repo made Azure DevOps change where we're checked out.
-
-- checkout: internal
-  clean: true
-  submodules: false
-  fetchDepth: 1
-  persistCredentials: true
-  path: s/Terminal.Internal
-
-- task: MicrosoftTDBuild.tdbuild-task.tdbuild-task.TouchdownBuildTask@1
-  displayName: 'Touchdown Build - 7105, PRODEXT'
-  inputs:
-    teamId: 7105
-    authId: '$(TouchdownApplicationID)'
-    authKey: '$(TouchdownApplicationKey)'
-    resourceFilePath: |
-     **\en-US\*.resw
-     Terminal.Internal\PDPs\Stable\PDPs\en-us\PDP.xml
-     Terminal.Internal\PDPs\Preview\PDPs\en-us\PDP.xml
-    outputDirectoryRoot: LocOutput
-    appendRelativeDir: true
-    pseudoSetting: Included
-
-# Saving one of these makes it really easy to inspect the loc output...
-- powershell: 'tar czf LocOutput.tar.gz LocOutput'
-  displayName: 'Archive Loc Output for Submission'
-
-- task: PublishBuildArtifacts@1
-  displayName: 'Publish Artifact: LocOutput'
-  inputs:
-    PathtoPublish: LocOutput.tar.gz
-    ArtifactName: LocOutput

build/pipelines/feature-flag-ci.yml

@@ -1,40 +0,0 @@
-trigger: none
-
-pr:
-  branches:
-    include:
-      - main
-  paths:
-    include:
-      - src/features.xml
-      - build/pipelines/feature-flag-ci.yml
-
-variables:
-  - name: runCodesignValidationInjectionBG
-    value: false
-
-parameters:
-  - name: buildBrandings
-    type: object
-    default:
-      - Release
-      - Preview
-      # Dev is built automatically
-      # WindowsInbox does not typically build with VS.
-
-stages:
-  - ${{ each branding in parameters.buildBrandings }}:
-    - stage: Build_${{ branding }}
-      dependsOn: []
-      displayName: Build ${{ branding }}
-      jobs:
-        - template: ./templates-v2/job-build-project.yml
-          parameters:
-            pool: # This only runs in CI
-                name: SHINE-OSS-L
-            buildPlatforms: [x64]
-            buildConfigurations: [Release]
-            buildEverything: true
-            branding: ${{ branding }}
-            keepAllExpensiveBuildOutputs: false
-            artifactStem: -${{ branding }} # Disambiguate artifacts with the same config/platform

build/pipelines/fuzz.yml

@@ -1,67 +0,0 @@
-trigger:
-  batch: true
-  branches:
-    include:
-      - main
-  paths:
-    exclude:
-      - docs/*
-      - samples/*
-      - tools/*
-
-pr: none
-
-#     0.0.yyMM.dd##
-#     0.0.1904.0900
-name: 0.0.$(Date:yyMM).$(Date:dd)$(Rev:rr)
-
-stages:
-  - stage: Build
-    displayName: Fuzzing Build
-    dependsOn: []
-    condition: succeeded()
-    jobs:
-      - template: ./templates-v2/job-build-project.yml
-        parameters:
-          pool:
-            ${{ if eq(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-              name: SHINE-OSS-L
-            ${{ if ne(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-              name: SHINE-INT-L
-          buildPlatforms: [x64]
-          buildConfigurations: [Fuzzing]
-          buildEverything: true
-          keepAllExpensiveBuildOutputs: false
-
-  - stage: Submit
-    displayName: Submit to OneFuzz
-    dependsOn: [Build]
-    condition: succeeded()
-    jobs:
-      - job:
-        pool:
-          vmImage: 'ubuntu-latest'
-        steps:
-        - task: DownloadPipelineArtifact@2
-          displayName: Download artifacts
-          inputs:
-            artifactName: build-x64-Fuzzing
-            downloadPath: $(Build.ArtifactStagingDirectory)
-        - task: UsePythonVersion@0
-          inputs:
-            versionSpec: '3.x'
-            addToPath: true
-            architecture: 'x64'
-        - bash: |
-            set -ex
-            pip -q install onefuzz
-            onefuzz config --endpoint $(endpoint) --client_id $(client_id) --authority $(authority) --tenant_domain $(tenant_domain) --client_secret $(client_secret)
-            sed -i s/INSERT_PAT_HERE/$(ado_pat)/ build/Fuzz/notifications-ado.json
-            sed -i s/INSERT_ASSIGNED_HERE/$(ado_assigned_to)/ build/Fuzz/notifications-ado.json
-          displayName: Configure OneFuzz
-        - bash: |
-            onefuzz template libfuzzer basic --colocate_all_tasks --vm_count 1 --target_exe $target_exe_path --notification_config @./build/Fuzz/notifications-ado.json OpenConsole $test_name $(Build.SourceVersion) default
-          displayName: Submit OneFuzz Job
-          env:
-            target_exe_path: $(Build.ArtifactStagingDirectory)/OpenConsoleFuzzer.exe
-            test_name: WriteCharsLegacy

build/pipelines/ob-nightly.yml

@@ -1,53 +0,0 @@
-trigger: none
-pr: none
-schedules:
-  - cron: "30 3 * * 2-6" # Run at 03:30 UTC Tuesday through Saturday (After the work day in Pacific, Mon-Fri)
-    displayName: "Nightly Terminal Build"
-    branches:
-      include:
-        - main
-    always: false # only run if there's code changes!
-
-parameters:
-  - name: publishToAzure
-    displayName: "Deploy to **PUBLIC** Azure Storage"
-    type: boolean
-    default: true
-
-name: $(BuildDefinitionName)_$(date:yyMM).$(date:dd)$(rev:rrr)
-
-variables:
-  - template: templates-v2/variables-nuget-package-version.yml
-    parameters:
-      branding: Canary
-  - template: templates-v2/variables-onebranch-config.yml
-
-extends:
-  template: templates-v2/pipeline-onebranch-full-release-build.yml
-  parameters:
-    official: true
-    branding: Canary
-    buildTerminal: true
-    pgoBuildMode: Optimize
-    codeSign: true
-    publishSymbolsToPublic: true
-    publishVpackToWindows: false
-    symbolExpiryTime: 15
-    ${{ if eq(true, parameters.publishToAzure) }}:
-      extraPublishJobs:
-        - template: build/pipelines/templates-v2/job-deploy-to-azure-storage.yml@self
-          parameters:
-            pool: { type: windows }
-            variables:
-              ob_git_checkout: false # This job checks itself out
-              ob_git_skip_checkout_none: true
-              ob_outputDirectory: "$(Build.SourcesDirectory)/_none"
-            dependsOn: [PublishSymbols]
-            storagePublicRootURL: $(AppInstallerRootURL)
-            subscription: $(AzureSubscriptionName)
-            storageAccount: $(AzureStorageAccount)
-            storageContainer: $(AzureStorageContainer)
-            buildConfiguration: Release
-            buildPlatforms: [x64, x86, arm64]
-            environment: production-canary
-

build/pipelines/ob-release.yml

@@ -1,83 +0,0 @@
-trigger: none
-pr: none
-
-# Expose all of these parameters for user configuration.
-parameters:
-  - name: branding
-    displayName: "Branding (Build Type)"
-    type: string
-    default: Release
-    values:
-      - Release
-      - Preview
-      - Canary
-      - Dev
-  - name: buildTerminal
-    displayName: "Build Windows Terminal MSIX"
-    type: boolean
-    default: true
-  - name: buildConPTY
-    displayName: "Build ConPTY NuGet"
-    type: boolean
-    default: false
-  - name: buildWPF
-    displayName: "Build Terminal WPF Control"
-    type: boolean
-    default: false
-  - name: pgoBuildMode
-    displayName: "PGO Build Mode"
-    type: string
-    default: Optimize
-    values:
-      - Optimize
-      - Instrument
-      - None
-  - name: buildConfigurations
-    displayName: "Build Configurations"
-    type: object
-    default:
-      - Release
-  - name: buildPlatforms
-    displayName: "Build Platforms"
-    type: object
-    default:
-      - x64
-      - x86
-      - arm64
-  - name: terminalInternalPackageVersion
-    displayName: "Terminal Internal Package Version"
-    type: string
-    default: '0.0.8'
-
-  - name: publishSymbolsToPublic
-    displayName: "Publish Symbols to MSDL"
-    type: boolean
-    default: true
-  - name: publishVpackToWindows
-    displayName: "Publish VPack to Windows"
-    type: boolean
-    default: false
-
-name: $(BuildDefinitionName)_$(date:yyMM).$(date:dd)$(rev:rrr)
-
-variables:
-  - template: templates-v2/variables-nuget-package-version.yml
-    parameters:
-      branding: ${{ parameters.branding }}
-  - template: templates-v2/variables-onebranch-config.yml
-
-extends:
-  template: templates-v2/pipeline-onebranch-full-release-build.yml
-  parameters:
-    official: true
-    branding: ${{ parameters.branding }}
-    buildTerminal: ${{ parameters.buildTerminal }}
-    buildConPTY: ${{ parameters.buildConPTY }}
-    buildWPF: ${{ parameters.buildWPF }}
-    pgoBuildMode: ${{ parameters.pgoBuildMode }}
-    buildConfigurations: ${{ parameters.buildConfigurations }}
-    buildPlatforms: ${{ parameters.buildPlatforms }}
-    codeSign: true
-    terminalInternalPackageVersion: ${{ parameters.terminalInternalPackageVersion }}
-    publishSymbolsToPublic: ${{ parameters.publishSymbolsToPublic }}
-    publishVpackToWindows: ${{ parameters.publishVpackToWindows }}

build/pipelines/pgo.yml

@@ -1,88 +0,0 @@
-trigger: none
-pr: none
-schedules:
-  - cron: "0 5 * * 2-6" # Run at 05:00 UTC Tuesday through Saturday (Even later than Localization, after the work day in Pacific, Mon-Fri)
-    displayName: "Nightly Instrumentation Build"
-    branches:
-      include:
-        - main
-    always: false # only run if there's code changes!
-
-parameters:
-  - name: branding
-    displayName: "Branding (Build Type)"
-    type: string
-    default: Preview # By default, we'll PGO the Preview builds to get max coverage
-    values:
-      - Release
-      - Preview
-      - Dev
-  - name: buildPlatforms
-    type: object
-    default:
-      - x64
-      - arm64
-
-variables:
-  - name: runCodesignValidationInjectionBG
-    value: false
-
-#     0.0.yyMM.dd##
-#     0.0.1904.0900
-name: 0.0.$(Date:yyMM).$(Date:dd)$(Rev:rr)
-
-stages:
-  - stage: Build
-    displayName: Build
-    dependsOn: []
-    condition: succeeded()
-    jobs:
-      - template: ./templates-v2/job-build-project.yml
-        parameters:
-          pool:
-            ${{ if eq(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-              name: SHINE-OSS-L
-            ${{ if ne(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-              name: SHINE-INT-L
-          branding: ${{ parameters.branding }}
-          buildPlatforms: ${{ parameters.buildPlatforms }}
-          buildConfigurations: [Release]
-          buildEverything: true
-          pgoBuildMode: Instrument
-          artifactStem: -instrumentation
-
-  - stage: RunPGO
-    displayName: Run PGO
-    dependsOn: [Build]
-    condition: succeeded()
-    jobs:
-      - ${{ each platform in parameters.buildPlatforms }}:
-        - template: ./templates-v2/job-run-pgo-tests.yml
-          parameters:
-            # This job chooses its own pools based on platform
-            buildPlatform: ${{ platform }}
-            buildConfiguration: Release
-            artifactStem: -instrumentation
-
-  - stage: FinalizePGO
-    displayName: Finalize PGO and Publish
-    dependsOn: [RunPGO]
-    condition: succeeded()
-    jobs:
-      # This job takes multiple platforms and fans them back in to a single artifact.
-      - template: ./templates-v2/job-pgo-merge-pgd.yml
-        parameters:
-          jobName: MergePGD
-          pool:
-            vmImage: 'windows-2022'
-          buildConfiguration: Release
-          buildPlatforms: ${{ parameters.buildPlatforms }}
-          artifactStem: -instrumentation
-
-      - template: ./templates-v2/job-pgo-build-nuget-and-publish.yml
-        parameters:
-          pool:
-            vmImage: 'windows-2022'
-          dependsOn: MergePGD
-          buildConfiguration: Release
-          artifactStem: -instrumentation

build/pipelines/release.yml

@@ -0,0 +1,40 @@
+trigger: none
+pr: none
+
+variables:
+  baseYearForVersioning: 2019 # Used by build-console-int
+  versionMajor: 0
+  versionMinor: 1
+
+# When we move off PackageES for Versioning, we'll need to switch
+# name to this format. For now, though, we need to use DayOfYear.Rev
+# to unique our builds, as mandated by PackageES's Setup task.
+# name: '$(versionMajor).$(versionMinor).$(DayOfYear)$(Rev:r).0'
+#
+# Build name/version number above must end with .0 to make the
+# store publication machinery happy.
+name: 'Terminal_$(date:yyMM).$(date:dd)$(rev:rrr)'
+
+jobs:
+  - template: ./templates/build-console-audit-job.yml
+    parameters:
+      platform: x64
+
+  - template: ./templates/build-console-int.yml
+    parameters:
+      platform: x64
+      additionalBuildArguments: /p:WindowsTerminalReleaseBuild=true
+
+  - template: ./templates/build-console-int.yml
+    parameters:
+      platform: x86
+      additionalBuildArguments: /p:WindowsTerminalReleaseBuild=true
+
+  - template: ./templates/build-console-int.yml
+    parameters:
+      platform: arm64
+      additionalBuildArguments: /p:WindowsTerminalReleaseBuild=true
+
+  - template: ./templates/check-formatting.yml
+
+  - template: ./templates/release-sign-and-bundle.yml

build/pipelines/templates-v2/job-build-package-wpf.yml

@@ -1,144 +0,0 @@
-parameters:
-  - name: buildConfigurations
-    type: object
-  - name: buildPlatforms
-    type: object
-  - name: generateSbom
-    type: boolean
-    default: false
-  - name: codeSign
-    type: boolean
-    default: false
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: jobName
-    type: string
-    default: PackWPF
-  - name: variables
-    type: object
-    default: {}
-  - name: publishArtifacts
-    type: boolean
-    default: true
-
-jobs:
-- job: ${{ parameters.jobName }}
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  ${{ if eq(parameters.codeSign, true) }}:
-    displayName: Pack and Sign Microsoft.Terminal.Wpf
-  ${{ else }}:
-    displayName: Pack Microsoft.Terminal.Wpf
-  strategy:
-    matrix:
-      ${{ each config in parameters.buildConfigurations }}:
-        ${{ config }}:
-          BuildConfiguration: ${{ config }}
-  dependsOn: ${{ parameters.dependsOn }}
-  variables:
-    OutputBuildPlatform: AnyCPU
-    Terminal.BinDir: $(Build.SourcesDirectory)/bin/$(OutputBuildPlatform)/$(BuildConfiguration)
-    JobOutputDirectory: $(Build.ArtifactStagingDirectory)\nupkg
-    JobOutputArtifactName: wpf-nupkg-$(BuildConfiguration)${{ parameters.artifactStem }}
-    ${{ insert }}: ${{ parameters.variables }}
-  steps:
-  - checkout: self
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: true
-    persistCredentials: True
-
-  - task: PkgESSetupBuild@12
-    displayName: Package ES - Setup Build
-    inputs:
-      disableOutputRedirect: true
-
-  - template: steps-download-bin-dir-artifact.yml
-    parameters:
-      buildPlatforms:
-        - ${{ parameters.buildPlatforms }}
-        - Any CPU # Make sure we grab the precompiled WPF bits
-      # This build is already matrix'd on configuration, so
-      # just pass a single config into the download template.
-      buildConfigurations:
-        - $(BuildConfiguration)
-      artifactStem: ${{ parameters.artifactStem }}
-
-  - template: .\steps-restore-nuget.yml
-
-  - task: VSBuild@1
-    displayName: Build solution OpenConsole.sln for WPF Control (Pack)
-    inputs:
-      solution: 'OpenConsole.sln'
-      msbuildArgs: >-
-        /p:WindowsTerminalReleaseBuild=true;Version=$(XES_PACKAGEVERSIONNUMBER)
-        /p:NoBuild=true
-        /p:IncludeSymbols=true
-        /t:Terminal\wpf\WpfTerminalControl:Pack
-      platform: Any CPU
-      configuration: $(BuildConfiguration)
-      maximumCpuCount: true
-      clean: false
-
-  - task: CopyFiles@2
-    displayName: Copy *.nupkg to Artifacts
-    inputs:
-      Contents: 'bin/**/*Wpf*.nupkg'
-      TargetFolder: $(Build.ArtifactStagingDirectory)/nupkg
-      OverWrite: true
-      flattenFolders: true
-
-  - ${{ if eq(parameters.codeSign, true) }}:
-    - task: EsrpCodeSigning@3
-      displayName: Submit *.nupkg to ESRP for code signing
-      inputs:
-        ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a
-        FolderPath: $(Build.ArtifactStagingDirectory)/nupkg
-        Pattern: '*.nupkg'
-        UseMinimatch: true
-        signConfigType: inlineSignParams
-        inlineOperation: >-
-          [
-              {
-                  "KeyCode": "CP-401405",
-                  "OperationCode": "NuGetSign",
-                  "Parameters": {},
-                  "ToolName": "sign",
-                  "ToolVersion": "1.0"
-              },
-              {
-                  "KeyCode": "CP-401405",
-                  "OperationCode": "NuGetVerify",
-                  "Parameters": {},
-                  "ToolName": "sign",
-                  "ToolVersion": "1.0"
-              }
-          ]
-
-  - ${{ if eq(parameters.generateSbom, true) }}:
-    - task: AzureArtifacts.manifest-generator-task.manifest-generator-task.ManifestGeneratorTask@0
-      displayName: 'Generate SBOM manifest (wpf)'
-      inputs:
-       BuildDropPath: '$(System.ArtifactsDirectory)/nupkg'
-       BuildComponentPath: '$(Build.SourcesDirectory)/bin'
-
-    - task: DropValidatorTask@0
-      displayName: 'Validate wpf SBOM manifest'
-      inputs:
-        BuildDropPath: '$(System.ArtifactsDirectory)/nupkg'
-        OutputPath: 'output.json'
-        ValidateSignature: true
-        Verbosity: 'Verbose'
-
-  - ${{ if eq(parameters.publishArtifacts, true) }}:
-    - publish: $(JobOutputDirectory)
-      artifact: $(JobOutputArtifactName)
-      displayName: Publish nupkg

build/pipelines/templates-v2/job-build-project.yml

@@ -1,298 +0,0 @@
-parameters:
-  - name: branding
-    type: string
-    default: Dev
-  - name: additionalBuildOptions
-    type: string
-    default: ''
-  - name: buildTerminal
-    type: boolean
-    default: true
-  - name: buildConPTY
-    type: boolean
-    default: false
-  - name: buildWPF
-    type: boolean
-    default: false
-  - name: buildWPFDotNetComponents # This weird hack is to make sure we sign and source index the .NET pieces
-    type: boolean
-    default: false
-  - name: buildEverything
-    displayName: "Build Everything (Overrides all other build options)"
-    type: boolean
-    default: false
-  - name: pgoBuildMode
-    type: string
-    default: None
-    values: [Optimize, Instrument, None]
-  - name: buildConfigurations
-    type: object
-    default:
-      - Release
-  - name: buildPlatforms
-    type: object
-    default:
-      - x64
-      - x86
-      - arm64
-  - name: generateSbom
-    type: boolean
-    default: false
-  - name: codeSign
-    type: boolean
-    default: false
-  - name: keepAllExpensiveBuildOutputs
-    type: boolean
-    default: true
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: jobName
-    type: string
-    default: 'Build'
-  - name: pool
-    type: object
-    default: []
-  - name: beforeBuildSteps
-    type: stepList
-    default: []
-  - name: variables
-    type: object
-    default: {}
-  - name: publishArtifacts
-    type: boolean
-    default: true
-  - name: removeAllNonSignedFiles
-    type: boolean
-    default: false
-
-jobs:
-- job: ${{ parameters.jobName }}
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  strategy:
-    matrix:
-      ${{ each config in parameters.buildConfigurations }}:
-        ${{ each platform in parameters.buildPlatforms }}:
-          ${{ config }}_${{ platform }}:
-            BuildConfiguration: ${{ config }}
-            BuildPlatform: ${{ platform }}
-            ${{ if eq(platform, 'x86') }}:
-              OutputBuildPlatform: Win32
-            ${{ elseif eq(platform, 'Any CPU') }}:
-              OutputBuildPlatform: AnyCPU
-            ${{ else }}:
-              OutputBuildPlatform: ${{ platform }}
-  variables:
-    MakeAppxPath: 'C:\Program Files (x86)\Windows Kits\10\bin\10.0.22621.0\x86\MakeAppx.exe'
-    Terminal.BinDir: $(Build.SourcesDirectory)/bin/$(OutputBuildPlatform)/$(BuildConfiguration)
-    # Azure DevOps abhors a vacuum
-    # If these are blank, expansion will fail later on... which will result in direct substitution of the variable *names*
-    # later on. We'll just... set them to a single space and if we need to, check IsNullOrWhiteSpace.
-    # Yup.
-    BuildTargetParameter: ' '
-    SelectedSigningFragments: ' '
-    # When building the unpackaged distribution, build it in portable mode if it's Canary-branded
-    ${{ if eq(parameters.branding, 'Canary') }}:
-      UnpackagedBuildArguments: -PortableMode
-    ${{ else }}:
-      UnpackagedBuildArguments: ' '
-    JobOutputDirectory: $(Terminal.BinDir)
-    JobOutputArtifactName: build-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.artifactStem }}
-    ${{ insert }}: ${{ parameters.variables }}
-  displayName: Build
-  timeoutInMinutes: 240
-  cancelTimeoutInMinutes: 1
-  steps:
-  - checkout: self
-    clean: true
-    submodules: true
-    persistCredentials: True
-  # This generates either nothing for BuildTargetParameter, or /t:X;Y;Z, to control targets later.
-  - pwsh: |-
-      If (-Not [bool]::Parse("${{ parameters.buildEverything }}")) {
-        $BuildTargets = @()
-        $SignFragments = @()
-        If ([bool]::Parse("${{ parameters.buildTerminal }}")) {
-          $BuildTargets += "Terminal\CascadiaPackage"
-          $SignFragments += "terminal_constituents"
-        }
-        If ([bool]::Parse("${{ parameters.buildWPFDotNetComponents }}")) {
-          $BuildTargets += "Terminal\wpf\WpfTerminalControl"
-          $SignFragments += "wpfdotnet"
-        }
-        If ([bool]::Parse("${{ parameters.buildWPF }}")) {
-          $BuildTargets += "Terminal\Control\Microsoft_Terminal_Control"
-          $SignFragments += "wpf"
-        }
-        If ([bool]::Parse("${{ parameters.buildConPTY }}")) {
-          $BuildTargets += "Conhost\Host_EXE;Conhost\winconpty_DLL"
-          $SignFragments += "conpty"
-        }
-        Write-Host "Targets: $($BuildTargets -Join ";")"
-        Write-Host "Sign targets: $($SignFragments -Join ";")"
-        Write-Host "##vso[task.setvariable variable=BuildTargetParameter]/t:$($BuildTargets -Join ";")"
-        Write-Host "##vso[task.setvariable variable=SelectedSigningFragments]$($SignFragments -Join ";")"
-      }
-    displayName: Prepare Build and Sign Targets
-
-  - pwsh: |-
-      .\build\scripts\Generate-ThirdPartyNotices.ps1 -MarkdownNoticePath .\NOTICE.md -OutputPath .\src\cascadia\CascadiaPackage\NOTICE.html
-    displayName: Generate NOTICE.html from NOTICE.md
-
-  - template: .\steps-restore-nuget.yml
-
-  - ${{ parameters.beforeBuildSteps }}
-
-  - task: VSBuild@1
-    displayName: Build OpenConsole.sln
-    inputs:
-      solution: 'OpenConsole.sln'
-      msbuildArgs: >-
-        /p:WindowsTerminalOfficialBuild=true;WindowsTerminalBranding=${{ parameters.branding }};PGOBuildMode=${{ parameters.pgoBuildMode }}
-        ${{ parameters.additionalBuildOptions }}
-        /bl:$(Build.SourcesDirectory)\msbuild.binlog
-        $(BuildTargetParameter)
-      platform: $(BuildPlatform)
-      configuration: $(BuildConfiguration)
-      maximumCpuCount: true
-
-  - ${{ if eq(parameters.publishArtifacts, true) }}:
-    - publish: $(Build.SourcesDirectory)/msbuild.binlog
-      artifact: logs-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.artifactStem }}
-      condition: always()
-      displayName: Publish Build Log
-  - ${{ else }}:
-    - task: CopyFiles@2
-      displayName: Copy Build Log
-      inputs:
-        contents: $(Build.SourcesDirectory)/msbuild.binlog
-        TargetFolder: $(Terminal.BinDir)
-
-  # This saves ~2GiB per architecture. We won't need these later.
-  # Removes:
-  # - All .lib that do not have an associated .exp (which would indicate that they are import libs)
-  # - All .pdbs from those .libs (which were only used during linking)
-  # - Directories ending in Lib (static lib projects that we fully linked into DLLs which may also contain unnecessary resources)
-  # - All LocalTests_ project outputs, as they were subsumed into TestHostApp
-  # - All PDB files inside the WindowsTerminal/ output, which do not belong there.
-  # - console.dll, which apparently breaks XFGCheck? lol.
-  - pwsh: |-
-      $binDir = '$(Terminal.BinDir)'
-      $ImportLibs = Get-ChildItem $binDir -Recurse -File -Filter '*.exp' | ForEach-Object { $_.FullName -Replace "exp$","lib" }
-      $StaticLibs = Get-ChildItem $binDir -Recurse -File -Filter '*.lib' | Where-Object FullName -NotIn $ImportLibs
-
-      $Items = @()
-      $Items += $StaticLibs
-      $Items += Get-Item ($StaticLibs.FullName -Replace "lib$","pdb") -ErrorAction:Ignore
-      $Items += Get-ChildItem $binDir -Directory -Filter '*Lib'
-      $Items += Get-ChildItem $binDir -Directory -Filter 'LocalTests_*'
-      $Items += Get-ChildItem "${$binDir}\WindowsTerminal" -Filter '*.pdb' -ErrorAction:Ignore
-
-      If (-Not [bool]::Parse('${{ parameters.keepAllExpensiveBuildOutputs }}')) {
-        $Items += Get-ChildItem '$(Terminal.BinDir)' -Filter '*.pdb' -Recurse
-      }
-
-      $Items += Get-ChildItem $binDir -Filter 'console.dll'
-
-      $Items | Remove-Item -Recurse -Force -Verbose -ErrorAction:Ignore
-    displayName: Clean up static libs and extra symbols
-    errorActionPreference: silentlyContinue # It's OK if this silently fails
-
-  # We cannot index PDBs that we have deleted!
-  - ${{ if eq(parameters.keepAllExpensiveBuildOutputs, true) }}:
-    - pwsh: |-
-        build\scripts\Index-Pdbs.ps1 -SearchDir '$(Terminal.BinDir)' -SourceRoot '$(Build.SourcesDirectory)' -recursive -Verbose -CommitId $(Build.SourceVersion)
-      displayName: Source Index PDBs
-      errorActionPreference: silentlyContinue
-
-  - ${{ if or(parameters.buildTerminal, parameters.buildEverything) }}:
-    - pwsh: |-
-        $Package = (Get-ChildItem -Recurse -Filter "CascadiaPackage*.msix" | Select -First 1)
-        $PackageFilename = $Package.FullName
-        Write-Host "##vso[task.setvariable variable=WindowsTerminalPackagePath]${PackageFilename}"
-      displayName: Locate the MSIX
-
-    # CHECK EXCEPTION
-    # PGO requires a desktop CRT
-    - ${{ if ne(parameters.pgoBuildMode, 'Instrument') }}:
-      - pwsh: |-
-          .\build\scripts\Test-WindowsTerminalPackage.ps1 -Verbose -Path "$(WindowsTerminalPackagePath)"
-        displayName: Check MSIX for common regressions
-        condition: and(succeeded(), ne(variables.WindowsTerminalPackagePath, ''))
-      
-    - ${{ if eq(parameters.codeSign, true) }}:
-      - pwsh: |-
-          & "$(MakeAppxPath)" unpack /p "$(WindowsTerminalPackagePath)" /d "$(Terminal.BinDir)/PackageContents"
-        displayName: Unpack the MSIX for signing
-
-  - ${{ if eq(parameters.codeSign, true) }}:
-    - template: steps-create-signing-config.yml
-      parameters:
-        outFile: '$(Build.SourcesDirectory)/ESRPSigningConfig.json'
-        stage: build
-        fragments: $(SelectedSigningFragments)
-
-    # Code-sign everything we just put together.
-    # We run the signing in Terminal.BinDir, because all of the signing batches are relative to the final architecture/configuration output folder.
-    - task: EsrpCodeSigning@3
-      displayName: Submit Signing Request
-      inputs:
-        ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a
-        FolderPath: '$(Terminal.BinDir)'
-        signType: batchSigning
-        batchSignPolicyFile: '$(Build.SourcesDirectory)/ESRPSigningConfig.json'
-
-    # We only need to re-pack the MSIX if we actually signed, so this can stay in the codeSign conditional
-    - ${{ if or(parameters.buildTerminal, parameters.buildEverything) }}:
-      - pwsh: |-
-          $outDir = New-Item -Type Directory "$(Terminal.BinDir)/_appx" -ErrorAction:Ignore
-          $PackageFilename = Join-Path $outDir.FullName (Split-Path -Leaf "$(WindowsTerminalPackagePath)")
-          & "$(MakeAppxPath)" pack /h SHA256 /o /p $PackageFilename /d "$(Terminal.BinDir)/PackageContents"
-          Write-Host "##vso[task.setvariable variable=WindowsTerminalPackagePath]${PackageFilename}"
-        displayName: Re-pack the new Terminal package after signing
-
-    # Some of our governed pipelines explicitly fail builds that have *any* non-codesigned filed (!)
-    - ${{ if eq(parameters.removeAllNonSignedFiles, true) }}:
-      - pwsh: |-
-          Get-ChildItem "$(Terminal.BinDir)" -Recurse -Include "*.dll","*.exe" |
-            Where-Object { (Get-AuthenticodeSignature $_).Status -Ne "Valid" } |
-            Remove-Item -Verbose -Force
-        displayName: Remove all non-signed output files
-
-  - ${{ else }}: # No Signing
-    - ${{ if or(parameters.buildTerminal, parameters.buildEverything) }}:
-      - pwsh: |-
-          $outDir = New-Item -Type Directory "$(Terminal.BinDir)/_appx" -ErrorAction:Ignore
-          $PackageFilename = Join-Path $outDir.FullName (Split-Path -Leaf "$(WindowsTerminalPackagePath)")
-          Copy-Item "$(WindowsTerminalPackagePath)" $PackageFilename
-          Write-Host "##vso[task.setvariable variable=WindowsTerminalPackagePath]${PackageFilename}"
-        displayName: Stage the package (unsigned)
-        condition: and(succeeded(), ne(variables.WindowsTerminalPackagePath, ''))
-
-  - ${{ if or(parameters.buildTerminal, parameters.buildEverything) }}:
-    - pwsh: |-
-        $XamlAppxPath = (Get-Item "src\cascadia\CascadiaPackage\AppPackages\*\Dependencies\$(BuildPlatform)\Microsoft.UI.Xaml*.appx").FullName
-        $outDir = New-Item -Type Directory "$(Terminal.BinDir)/_unpackaged" -ErrorAction:Ignore
-        & .\build\scripts\New-UnpackagedTerminalDistribution.ps1 $(UnpackagedBuildArguments) -TerminalAppX $(WindowsTerminalPackagePath) -XamlAppX $XamlAppxPath -Destination $outDir.FullName
-      displayName: Build Unpackaged Distribution (from MSIX)
-      condition: and(succeeded(), ne(variables.WindowsTerminalPackagePath, ''))
-
-  - ${{ if eq(parameters.generateSbom, true) }}:
-    - task: AzureArtifacts.manifest-generator-task.manifest-generator-task.ManifestGeneratorTask@0
-      displayName: 'Generate SBOM manifest'
-      inputs:
-        BuildDropPath: '$(Terminal.BinDir)'
-
-    - task: DropValidatorTask@0
-      displayName: 'Validate SBOM manifest'
-      inputs:
-        BuildDropPath: '$(Terminal.BinDir)'
-        OutputPath: 'output.json'
-        ValidateSignature: true
-        Verbosity: 'Verbose'
-
-  - ${{ if eq(parameters.publishArtifacts, true) }}:
-    - publish: $(Terminal.BinDir)
-      artifact: $(JobOutputArtifactName)
-      displayName: Publish All Outputs

build/pipelines/templates-v2/job-check-code-format.yml

@@ -1,15 +0,0 @@
-jobs:
-- job: CodeFormatCheck
-  displayName: Check Code Format
-  pool: { vmImage: windows-2022 }
-
-  steps:
-  - checkout: self
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: false
-    clean: true
-
-  - powershell: |-
-      .\build\scripts\Invoke-FormattingCheck.ps1
-    displayName: 'Run formatters'

build/pipelines/templates-v2/job-deploy-to-azure-storage.yml

@@ -1,92 +0,0 @@
-parameters:
-  - name: buildConfiguration
-    type: string
-  - name: buildPlatforms
-    type: object
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: variables
-    type: object
-    default: {}
-  - name: environment
-    type: string
-  - name: storagePublicRootURL
-    type: string
-  - name: subscription
-    type: string
-  - name: storageAccount
-    type: string
-  - name: storageContainer
-    type: string
-
-jobs:
-- job: DeployAzure
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  displayName: Publish to Azure Storage (Prod)
-  dependsOn: ${{ parameters.dependsOn }}
-  variables:
-    ${{ insert }}: ${{ parameters.variables }}
-  steps:
-  - download: none
-
-  - checkout: self
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: true
-    persistCredentials: True
-
-  - task: DownloadPipelineArtifact@2
-    displayName: Download MSIX Bundle Artifact
-    inputs:
-      artifactName: appxbundle-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-      downloadPath: '$(Build.SourcesDirectory)/_out'
-      itemPattern: '**/*.msixbundle'
-
-  - ${{ each platform in parameters.buildPlatforms }}:
-    - task: DownloadPipelineArtifact@2
-      displayName: Download unpackaged build for ${{ platform }} ${{ parameters.buildConfiguration }}
-      inputs:
-        artifactName: build-${{ platform }}-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-        downloadPath: '$(Build.SourcesDirectory)/_unpackaged'
-        itemPattern: '**/_unpackaged/*.zip'
-
-  - pwsh: |-
-      $b = Get-Item _out/*.msixbundle
-      ./build/scripts/New-AppInstallerFromTemplateAndBundle.ps1 -BundlePath $b.FullName -AppInstallerTemplatePath ./build/config/template.appinstaller -AppInstallerRoot "${{ parameters.storagePublicRootURL }}" -OutputPath _out/Microsoft.WindowsTerminalCanary.appinstaller
-    displayName: "Produce AppInstaller for MSIX bundle"
-
-  - pwsh: |-
-      $zips = Get-ChildItem -Recurse -Filter *.zip _unpackaged
-      $zips | ForEach-Object {
-        $name = $_.Name
-        $parts = $name.Split('_')
-        $parts[1] = "latest"
-        $name = [String]::Join('_', $parts)
-        $_ | Move-Item -Destination (Join-Path "_out" $name)
-      }
-    displayName: "Wrangle Unpackaged builds into place, rename"
-
-  - powershell: |-
-      Get-PackageProvider -Name NuGet -ForceBootstrap
-      Install-Module -Verbose -AllowClobber -Force Az.Accounts, Az.Storage, Az.Network, Az.Resources, Az.Compute
-    displayName: Install Azure Module Dependencies
-
-  - task: AzureFileCopy@5
-    displayName: Publish to Storage Account
-    inputs:
-      sourcePath: _out/*
-      Destination: AzureBlob
-      azureSubscription: ${{ parameters.subscription }}
-      storage: ${{ parameters.storageAccount }}
-      ContainerName: ${{ parameters.storageContainer }}
-      AdditionalArgumentsForBlobCopy: "--content-type application/octet-stream"
-

build/pipelines/templates-v2/job-index-github-codenav.yml

@@ -1,16 +0,0 @@
-jobs:
-- job: CodeNavIndexer
-  displayName: Run GitHub CodeNav Indexer
-  pool: { vmImage: windows-2022 }
-
-  steps:
-  - checkout: self
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: false
-    clean: true
-
-  - task: RichCodeNavIndexer@0
-    inputs:
-      languages: 'cpp,csharp'
-    continueOnError: true

build/pipelines/templates-v2/job-merge-msix-into-bundle.yml

@@ -1,152 +0,0 @@
-parameters:
-  - name: branding
-    type: string
-  - name: buildConfigurations
-    type: object
-  - name: buildPlatforms
-    type: object
-  - name: generateSbom
-    type: boolean
-    default: false
-  - name: codeSign
-    type: boolean
-    default: false
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: jobName
-    type: string
-    default: Bundle
-  - name: variables
-    type: object
-    default: {}
-  - name: publishArtifacts
-    type: boolean
-    default: true
-  - name: afterBuildSteps
-    type: stepList
-    default: []
-
-jobs:
-- job: ${{ parameters.jobName }}
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  ${{ if eq(parameters.codeSign, true) }}:
-    displayName: Pack and Sign Terminal MSIXBundle
-  ${{ else }}:
-    displayName: Pack Terminal MSIXBundle
-  strategy:
-    matrix:
-      ${{ each config in parameters.buildConfigurations }}:
-        ${{ config }}:
-          BuildConfiguration: ${{ config }}
-  variables:
-    ${{ if eq(parameters.branding, 'Release') }}:
-      BundleStemName: Microsoft.WindowsTerminal
-    ${{ elseif eq(parameters.branding, 'Preview') }}:
-      BundleStemName: Microsoft.WindowsTerminalPreview
-    ${{ elseif eq(parameters.branding, 'Canary') }}:
-      BundleStemName: Microsoft.WindowsTerminalCanary
-    ${{ else }}:
-      BundleStemName: WindowsTerminalDev
-    JobOutputDirectory: '$(System.ArtifactsDirectory)/bundle'
-    JobOutputArtifactName: appxbundle-$(BuildConfiguration)${{ parameters.artifactStem }}
-    ${{ insert }}: ${{ parameters.variables }}
-  dependsOn: ${{ parameters.dependsOn }}
-  steps:
-  - checkout: self
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: true
-    persistCredentials: True
-  - task: PkgESSetupBuild@12
-    displayName: Package ES - Setup Build
-    inputs:
-      disableOutputRedirect: true
-  - template: steps-download-bin-dir-artifact.yml
-    parameters:
-      buildPlatforms: ${{ parameters.buildPlatforms }}
-      # This build is already matrix'd on configuration, so
-      # just pass a single config into the download template.
-      buildConfigurations:
-        - $(BuildConfiguration)
-      artifactStem: ${{ parameters.artifactStem }}
-
-  # Add 3000 to the major version component, but only for the bundle.
-  # This is to ensure that it is newer than "2022.xx.yy.zz" or whatever the original bundle versions were before
-  # we switched to uniform naming.
-  - pwsh: |-
-      $VersionEpoch = 3000
-      $Components = "$(XES_APPXMANIFESTVERSION)" -Split "\."
-      $Components[0] = ([int]$Components[0] + $VersionEpoch)
-      $BundleVersion = $Components -Join "."
-      New-Item -Type Directory "$(System.ArtifactsDirectory)/bundle"
-      $BundlePath = "$(System.ArtifactsDirectory)\bundle\$(BundleStemName)_$(XES_APPXMANIFESTVERSION)_8wekyb3d8bbwe.msixbundle"
-      .\build\scripts\Create-AppxBundle.ps1 -InputPath 'bin/' -ProjectName CascadiaPackage -BundleVersion $BundleVersion -OutputPath $BundlePath
-      Write-Host "##vso[task.setvariable variable=MsixBundlePath]${BundlePath}"
-    displayName: Create msixbundle
-
-  - ${{ if eq(parameters.codeSign, true) }}:
-    - task: EsrpCodeSigning@3
-      displayName: Submit *.msixbundle to ESRP for code signing
-      inputs:
-        ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a
-        FolderPath: $(System.ArtifactsDirectory)\bundle
-        Pattern: $(BundleStemName)*.msixbundle
-        UseMinimatch: true
-        signConfigType: inlineSignParams
-        inlineOperation: >-
-          [
-              {
-                  "KeyCode": "Dynamic",
-                  "CertTemplateName": "WINMSAPP1ST",
-                  "CertSubjectName": "CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US",
-                  "OperationCode": "SigntoolSign",
-                  "Parameters": {
-                      "OpusName": "Microsoft",
-                      "OpusInfo": "http://www.microsoft.com",
-                      "FileDigest": "/fd \"SHA256\"",
-                      "TimeStamp": "/tr \"http://rfc3161.gtm.corp.microsoft.com/TSS/HttpTspServer\" /td sha256"
-                  },
-                  "ToolName": "sign",
-                  "ToolVersion": "1.0"
-              },
-              {
-                  "KeyCode": "Dynamic",
-                  "CertTemplateName": "WINMSAPP1ST",
-                  "CertSubjectName": "CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US",
-                  "OperationCode": "SigntoolVerify",
-                  "Parameters": {},
-                  "ToolName": "sign",
-                  "ToolVersion": "1.0"
-              }
-          ]
-
-  - ${{ if eq(parameters.generateSbom, true) }}:
-    - task: AzureArtifacts.manifest-generator-task.manifest-generator-task.ManifestGeneratorTask@0
-      displayName: 'Generate SBOM manifest (bundle)'
-      inputs:
-       BuildDropPath: '$(System.ArtifactsDirectory)/bundle'
-       BuildComponentPath: '$(Build.SourcesDirectory)/bin'
-
-    - task: DropValidatorTask@0
-      displayName: 'Validate bundle SBOM manifest'
-      inputs:
-        BuildDropPath: '$(System.ArtifactsDirectory)/bundle'
-        OutputPath: 'output.json'
-        ValidateSignature: true
-        Verbosity: 'Verbose'
-
-  - ${{ parameters.afterBuildSteps }}
-
-  - ${{ if eq(parameters.publishArtifacts, true) }}:
-    - publish: $(JobOutputDirectory)
-      artifact: $(JobOutputArtifactName)
-      displayName: Publish msixbundle

build/pipelines/templates-v2/job-package-conpty.yml

@@ -1,129 +0,0 @@
-parameters:
-  - name: buildConfigurations
-    type: object
-  - name: buildPlatforms
-    type: object
-  - name: generateSbom
-    type: boolean
-    default: false
-  - name: codeSign
-    type: boolean
-    default: false
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: jobName
-    type: string
-    default: PackConPTY
-  - name: variables
-    type: object
-    default: {}
-  - name: publishArtifacts
-    type: boolean
-    default: true
-
-jobs:
-- job: ${{ parameters.jobName }}
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  ${{ if eq(parameters.codeSign, true) }}:
-    displayName: Pack and Sign Microsoft.Windows.Console.ConPTY
-  ${{ else }}:
-    displayName: Pack Microsoft.Windows.Console.ConPTY
-  strategy:
-    matrix:
-      ${{ each config in parameters.buildConfigurations }}:
-        ${{ config }}:
-          BuildConfiguration: ${{ config }}
-  dependsOn: ${{ parameters.dependsOn }}
-  variables:
-    JobOutputDirectory: $(Build.ArtifactStagingDirectory)\nupkg
-    JobOutputArtifactName: conpty-nupkg-$(BuildConfiguration)${{ parameters.artifactStem }}
-    ${{ insert }}: ${{ parameters.variables }}
-  steps:
-  - checkout: self
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: true
-    persistCredentials: True
-
-  - task: PkgESSetupBuild@12
-    displayName: Package ES - Setup Build
-    inputs:
-      disableOutputRedirect: true
-
-  - template: steps-download-bin-dir-artifact.yml
-    parameters:
-      buildPlatforms: ${{ parameters.buildPlatforms }}
-      # This build is already matrix'd on configuration, so
-      # just pass a single config into the download template.
-      buildConfigurations:
-        - $(BuildConfiguration)
-      artifactStem: ${{ parameters.artifactStem }}
-
-  - template: steps-ensure-nuget-version.yml
-
-# In the Microsoft Azure DevOps tenant, NuGetCommand is ambiguous.
-# This should be `task: NuGetCommand@2`
-  - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-    displayName: NuGet pack
-    inputs:
-      command: pack
-      packagesToPack: $(Build.SourcesDirectory)\src\winconpty\package\winconpty.nuspec
-      packDestination: '$(Build.ArtifactStagingDirectory)/nupkg'
-      versioningScheme: byEnvVar
-      versionEnvVar: XES_PACKAGEVERSIONNUMBER
-
-  - ${{ if eq(parameters.codeSign, true) }}:
-    - task: EsrpCodeSigning@3
-      displayName: Submit *.nupkg to ESRP for code signing
-      inputs:
-        ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a
-        FolderPath: $(Build.ArtifactStagingDirectory)/nupkg
-        Pattern: '*.nupkg'
-        UseMinimatch: true
-        signConfigType: inlineSignParams
-        inlineOperation: >-
-          [
-              {
-                  "KeyCode": "CP-401405",
-                  "OperationCode": "NuGetSign",
-                  "Parameters": {},
-                  "ToolName": "sign",
-                  "ToolVersion": "1.0"
-              },
-              {
-                  "KeyCode": "CP-401405",
-                  "OperationCode": "NuGetVerify",
-                  "Parameters": {},
-                  "ToolName": "sign",
-                  "ToolVersion": "1.0"
-              }
-          ]
-
-  - ${{ if eq(parameters.generateSbom, true) }}:
-    - task: AzureArtifacts.manifest-generator-task.manifest-generator-task.ManifestGeneratorTask@0
-      displayName: 'Generate SBOM manifest (conpty)'
-      inputs:
-       BuildDropPath: '$(System.ArtifactsDirectory)/nupkg'
-       BuildComponentPath: '$(Build.SourcesDirectory)/bin'
-
-    - task: DropValidatorTask@0
-      displayName: 'Validate conpty SBOM manifest'
-      inputs:
-        BuildDropPath: '$(System.ArtifactsDirectory)/nupkg'
-        OutputPath: 'output.json'
-        ValidateSignature: true
-        Verbosity: 'Verbose'
-
-  - ${{ if eq(parameters.publishArtifacts, true) }}:
-    - publish: $(JobOutputDirectory)
-      artifact: $(JobOutputArtifactName)
-      displayName: Publish nupkg

build/pipelines/templates-v2/job-pgo-build-nuget-and-publish.yml

@@ -1,82 +0,0 @@
-parameters:
-  - name: buildConfiguration
-    type: string
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: jobName
-    type: string
-    default: BuildAndPublishPGONuget
-
-jobs:
-- job: ${{ parameters.jobName }}
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  dependsOn: ${{ parameters.dependsOn }}
-  displayName: Package and Publish PGO Databases
-
-  variables:
-    artifactsPath: $(Build.SourcesDirectory)\Artifacts
-    pgoToolsPath: $(Build.SourcesDirectory)\build\PGO
-    nuspecPath: $(pgoToolsPath)\NuSpecs
-    nuspecFilename: PGO.nuspec
-
-  steps:
-  - checkout: self
-    clean: true
-    # It is important that this be 0, otherwise git will not fetch the branch ref names that the PGO rules require.
-    fetchDepth: 0
-    submodules: false
-    persistCredentials: false
-
-  - task: DownloadPipelineArtifact@2
-    displayName: Download Final PGO Databases
-    inputs:
-      artifact: pgd-merged-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-      downloadPath: $(artifactsPath)
-
-  - template: steps-ensure-nuget-version.yml
-
-  - task: NuGetAuthenticate@0
-    inputs:
-      nuGetServiceConnections: 'Terminal Public Artifact Feed'
-
-  # In the Microsoft Azure DevOps tenant, NuGetCommand is ambiguous.
-  # This should be `task: NuGetCommand@2`
-  - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-    displayName: Restore NuGet packages for extraneous build actions
-    inputs:
-      command: restore
-      feedsToUse: config
-      configPath: NuGet.config
-      restoreSolution: build/packages.config
-      restoreDirectory: '$(Build.SourcesDirectory)\packages'
-
-  - task: MSBuild@1
-    displayName: 'Create PGO Nuget'
-    inputs:
-      solution: $(pgoToolsPath)\PGO.DB.proj
-      msbuildArguments: '/t:CreatePGONuGet /p:PGOBuildMode=Instrument /p:PGDPathForAllArch=$(artifactsPath) /p:PGOOutputPath=$(Build.ArtifactStagingDirectory)'
-
-  - publish: $(Build.ArtifactStagingDirectory)
-    artifact: pgo-nupkg-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-    displayName: "Publish Pipeline Artifact"
-
-  - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-    displayName: 'NuGet push'
-    inputs:
-      command: push
-      nuGetFeedType: external
-      packagesToPush: $(Build.ArtifactStagingDirectory)/*.nupkg
-      # The actual URL and PAT for this feed is configured at
-      # https://microsoft.visualstudio.com/Dart/_settings/adminservices
-      # This is the name of that connection
-      publishFeedCredentials: 'Terminal Public Artifact Feed'
-      feedsToUse: config
-      nugetConfigPath: '$(Build.SourcesDirectory)/NuGet.config'

build/pipelines/templates-v2/job-pgo-merge-pgd.yml

@@ -1,75 +0,0 @@
-parameters:
-  - name: buildConfiguration
-    type: string
-  - name: buildPlatforms
-    type: object
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: jobName
-    type: string
-    default: MergePGD
-
-jobs:
-- job: ${{ parameters.jobName }}
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  dependsOn: ${{ parameters.dependsOn }}
-  displayName: Merge PGO Counts for ${{ parameters.buildConfiguration }}
-
-  steps:
-  # The environment variable VCToolsInstallDir isn't defined on lab machines, so we need to retrieve it ourselves.
-  - script: |
-      "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -Latest -requires Microsoft.Component.MSBuild -property InstallationPath > %TEMP%\vsinstalldir.txt
-      set /p _VSINSTALLDIR15=<%TEMP%\vsinstalldir.txt
-      del %TEMP%\vsinstalldir.txt
-      call "%_VSINSTALLDIR15%\Common7\Tools\VsDevCmd.bat"
-      echo VCToolsInstallDir = %VCToolsInstallDir%
-      echo ##vso[task.setvariable variable=VCToolsInstallDir]%VCToolsInstallDir%
-    displayName: 'Retrieve VC tools directory'
-
-  - ${{ each platform in parameters.buildPlatforms }}:
-    - task: DownloadPipelineArtifact@2
-      displayName: Download PGO Databases for ${{ platform }}
-      inputs:
-        artifactName: build-${{ platform }}-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-        itemPattern: '**/*.pgd'
-        downloadPath: '$(Build.SourcesDirectory)/pgd/${{ platform }}/${{ parameters.buildConfiguration }}'
-    - task: DownloadPipelineArtifact@2
-      displayName: Download PGO Counts for ${{ platform }}
-      inputs:
-        artifactName: pgc-intermediates-${{ platform }}-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-        downloadPath: '$(Build.SourcesDirectory)/pgc/${{ platform }}/${{ parameters.buildConfiguration }}'
-    - pwsh: |-
-        $Arch = '${{ platform }}'
-        $Conf = '${{ parameters.buildConfiguration }}'
-        $PGCDir = '$(Build.SourcesDirectory)/pgc/${{ platform }}/${{ parameters.buildConfiguration }}'
-        $PGDDir = '$(Build.SourcesDirectory)/pgd/${{ platform }}/${{ parameters.buildConfiguration }}'
-        # Flatten the PGD directory
-        Get-ChildItem $PGDDir -Recurse -Filter *.pgd | Move-Item -Destination $PGDDir -Verbose
-        Get-ChildItem $PGCDir -Filter *.pgc |
-          ForEach-Object {
-            $Parts = $_.Name -Split "!";
-            $_ | Add-Member Module $Parts[0] -PassThru
-          } |
-          Group-Object Module |
-          ForEach-Object {
-            & "$(VCToolsInstallDir)\bin\Hostx64\${{ platform }}\pgomgr.exe" /merge $_.Group.FullName "$PGDDir\$($_.Name).pgd"
-          }
-      displayName: Merge PGO Counts for ${{ platform }}
-    - task: CopyFiles@2
-      displayName: 'Copy merged pgds to artifact staging'
-      inputs:
-        sourceFolder: '$(Build.SourcesDirectory)/pgd/${{ platform }}/${{ parameters.buildConfiguration }}'
-        contents: '**\*.pgd'
-        targetFolder: '$(Build.ArtifactStagingDirectory)\out-pgd\${{ platform }}'
-
-  - publish: $(Build.ArtifactStagingDirectory)\out-pgd
-    artifact: pgd-merged-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-    displayName: "Publish merged PGDs"

build/pipelines/templates-v2/job-publish-symbols.yml

@@ -1,97 +0,0 @@
-parameters:
-  - name: includePublicSymbolServer
-    type: boolean
-    default: false
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: jobName
-    type: string
-    default: PublishSymbols
-  - name: symbolExpiryTime
-    type: string
-    default: 36530 # This is the default from PublishSymbols@2
-  - name: variables
-    type: object
-    default: {}
-  - name: symbolPatGoesInTaskInputs
-    type: boolean
-    default: false
-
-jobs:
-- job: ${{ parameters.jobName }}
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  ${{ if eq(parameters.includePublicSymbolServer, true) }}:
-    displayName: Publish Symbols to Internal and MSDL
-  ${{ else }}:
-    displayName: Publish Symbols Internally
-  dependsOn: ${{ parameters.dependsOn }}
-  variables:
-    ${{ insert }}: ${{ parameters.variables }}
-  steps:
-  - checkout: self
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: true
-    persistCredentials: True
-
-  - task: PkgESSetupBuild@12
-    displayName: Package ES - Setup Build
-    inputs:
-      disableOutputRedirect: true
-
-  - task: DownloadPipelineArtifact@2
-    displayName: Download all PDBs from all prior build phases
-    inputs:
-      itemPattern: '**/*.pdb'
-      targetPath: '$(Build.SourcesDirectory)/bin'
-
-  - task: PublishSymbols@2
-    displayName: Publish Symbols (to current Azure DevOps tenant)
-    continueOnError: True
-    inputs:
-      SymbolsFolder: '$(Build.SourcesDirectory)/bin'
-      SearchPattern: '**/*.pdb'
-      IndexSources: false
-      DetailedLog: true
-      SymbolsMaximumWaitTime: 30
-      SymbolServerType: 'TeamServices'
-      SymbolsProduct: 'Windows Terminal Converged Symbols'
-      SymbolsVersion: '$(XES_APPXMANIFESTVERSION)'
-      SymbolExpirationInDays: ${{ parameters.symbolExpiryTime }}
-    env:
-      LIB: $(Build.SourcesDirectory)
-
-  - ${{ if eq(parameters.includePublicSymbolServer, true) }}:
-    - task: PublishSymbols@2
-      displayName: 'Publish symbols to MSDL'
-      continueOnError: True
-      inputs:
-        SymbolsFolder: '$(Build.SourcesDirectory)/bin'
-        SearchPattern: '**/*.pdb'
-        IndexSources: false
-        DetailedLog: true
-        SymbolsMaximumWaitTime: 30
-        SymbolServerType: 'TeamServices'
-        SymbolsProduct: 'Windows Terminal Converged Symbols'
-        SymbolsVersion: '$(XES_APPXMANIFESTVERSION)'
-        SymbolExpirationInDays: ${{ parameters.symbolExpiryTime }}
-        ${{ if eq(parameters.symbolPatGoesInTaskInputs, true) }}:
-          Pat: $(ADO_microsoftpublicsymbols_PAT)
-        # The ADO task does not support indexing of GitHub sources.
-      # There is a bug which causes this task to fail if LIB includes an inaccessible path (even though it does not depend on it).
-      # To work around this issue, we just force LIB to be any dir that we know exists.
-      # Copied from https://github.com/microsoft/icu/blob/f869c214adc87415dfe751d81f42f1bca55dcf5f/build/azure-nuget.yml#L564-L583
-      env:
-        LIB: $(Build.SourcesDirectory)
-        ArtifactServices_Symbol_AccountName: microsoftpublicsymbols
-        ${{ if ne(parameters.symbolPatGoesInTaskInputs, true) }}:
-          ArtifactServices_Symbol_PAT: $(ADO_microsoftpublicsymbols_PAT)

build/pipelines/templates-v2/job-run-pgo-tests.yml

@@ -1,82 +0,0 @@
-parameters:
-  buildConfiguration: 'Release'
-  buildPlatform: ''
-  artifactStem: ''
-  testLogPath: '$(Build.BinariesDirectory)\$(BuildPlatform)\$(BuildConfiguration)\testsOnBuildMachine.wtl'
-
-jobs:
-- job: PGO${{ parameters.buildPlatform }}${{ parameters.buildConfiguration }}
-  displayName: PGO ${{ parameters.buildPlatform }} ${{ parameters.buildConfiguration }}
-  variables:
-    BuildConfiguration: ${{ parameters.buildConfiguration }}
-    BuildPlatform: ${{ parameters.buildPlatform }}
-    OutputBuildPlatform: ${{ parameters.buildPlatform }}
-    Terminal.BinDir: $(Build.SourcesDirectory)/bin/$(OutputBuildPlatform)/$(BuildConfiguration)
-  pool:
-    ${{ if eq(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-      ${{ if ne(parameters.buildPlatform, 'ARM64') }}:
-        name: SHINE-OSS-Testing-x64
-      ${{ else }}:
-        name: SHINE-OSS-Testing-arm64
-    ${{ if ne(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-      ${{ if ne(parameters.buildPlatform, 'ARM64') }}:
-        name: SHINE-INT-Testing-x64
-      ${{ else }}:
-        name: SHINE-INT-Testing-arm64
-
-  steps:
-  - checkout: self
-    submodules: false
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-
-  - task: DownloadPipelineArtifact@2
-    displayName: Download artifacts
-    inputs:
-      artifactName: build-${{ parameters.buildPlatform }}-$(BuildConfiguration)${{ parameters.artifactStem }}
-      downloadPath: $(Terminal.BinDir)
-
-  # The tests expect Terminal to be an unpackaged distribution named terminal-0.0.1.0 (after the dev build version scheme)
-  # Extract to that folder explicitly and strip the embedded folder name from the unpackaged archive.
-  - powershell: |-
-      $TargetDirectory = New-Item -Type Directory (Join-Path "$(Terminal.BinDir)" "terminal-0.0.1.0")
-      & tar.exe -x -v -f (Get-Item "$(Terminal.BinDir)/_unpackaged/*.zip") -C $TargetDirectory.FullName --strip-components=1
-    displayName: Extract the unpackaged build for PGO
-
-  - template: steps-ensure-nuget-version.yml
-
-  - powershell: |-
-      $Package = 'Microsoft.Internal.Windows.Terminal.TestContent'
-      $Version = '1.0.1'
-      & nuget.exe install $Package -Version $Version
-      Write-Host "##vso[task.setvariable variable=TerminalTestContentPath]$(Build.SourcesDirectory)\packages\${Package}.${Version}\content"
-    displayName: Install Test Content
-
-  - task: PowerShell@2
-    displayName: 'Run PGO Tests'
-    inputs:
-      targetType: filePath
-      filePath: build\scripts\Run-Tests.ps1
-      arguments: >-
-        -MatchPattern '*UIA.Tests.dll'
-        -Platform '$(OutputBuildPlatform)'
-        -Configuration '$(BuildConfiguration)'
-        -LogPath '${{ parameters.testLogPath }}'
-        -Root "$(Terminal.BinDir)"
-        -AdditionalTaefArguments '/select:(@IsPGO=true)','/p:WTTestContent=$(TerminalTestContentPath)'
-
-  - task: CopyFiles@2
-    displayName: 'Copy PGO outputs to Artifacts'
-    condition: always()
-    inputs:
-      Contents: |
-       **/*.pgc
-       ${{ parameters.testLogPath }}
-      TargetFolder: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/$(BuildPlatform)/pgc'
-      OverWrite: true
-      flattenFolders: true
-
-  - publish: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/$(BuildPlatform)/pgc'
-    artifact: pgc-intermediates-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.artifactStem }}
-    condition: always()

build/pipelines/templates-v2/job-submit-windows-vpack.yml

@@ -1,81 +0,0 @@
-parameters:
-  - name: buildConfiguration
-    type: string
-  - name: generateSbom
-    type: boolean
-    default: false
-  - name: pool
-    type: object
-    default: []
-  - name: dependsOn
-    type: object
-    default: null
-  - name: artifactStem
-    type: string
-    default: ''
-  - name: variables
-    type: object
-    default: {}
-  - name: publishArtifacts
-    type: boolean
-    default: true
-
-jobs:
-- job: VPack
-  ${{ if ne(length(parameters.pool), 0) }}:
-    pool: ${{ parameters.pool }}
-  displayName: Create and Submit Windows vPack
-  dependsOn: ${{ parameters.dependsOn }}
-  variables:
-    JobOutputDirectory: $(XES_VPACKMANIFESTDIRECTORY)
-    JobOutputArtifactName: vpack-manifest${{ parameters.artifactStem }}
-    ${{ insert }}: ${{ parameters.variables }}
-  steps:
-  - checkout: self
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-    submodules: true
-    persistCredentials: True
-
-  - task: PkgESSetupBuild@12
-    displayName: Package ES - Setup Build
-    inputs:
-      disableOutputRedirect: true
-
-  - task: DownloadPipelineArtifact@2
-    displayName: Download MSIX Bundle Artifact
-    inputs:
-      artifactName: appxbundle-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
-      downloadPath: '$(Build.SourcesDirectory)/bundle'
-
-  # Rename to known/fixed name for Windows build system
-  - powershell: |-
-      # Create vpack directory and place item inside
-      $TargetFolder = New-Item -Type Directory '$(Build.SourcesDirectory)/WindowsTerminal.app'
-      Get-ChildItem bundle/Microsoft.WindowsTerminal_*.msixbundle | Move-Item (Join-Path $TargetFolder.FullName 'Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle') -Verbose
-    displayName: Stage packages for vpack
-
-  - task: PkgESVPack@12
-    displayName: 'Package ES - VPack'
-    env:
-      SYSTEM_ACCESSTOKEN: $(System.AccessToken)
-    inputs:
-      sourceDirectory: '$(Build.SourcesDirectory)/WindowsTerminal.app'
-      description: VPack for the Windows Terminal Application
-      pushPkgName: WindowsTerminal.app
-      owner: conhost
-      githubToken: $(GitHubTokenForVpackProvenance)
-
-  - ${{ if eq(parameters.publishArtifacts, true) }}:
-    - publish: $(JobOutputDirectory)
-      artifact: $(JobOutputArtifactName)
-      displayName: 'Publish VPack Manifest to Drop'
-
-  - task: PkgESFCIBGit@12
-    displayName: 'Submit VPack Manifest to Windows'
-    inputs:
-      configPath: '$(Build.SourcesDirectory)\build\config\GitCheckin.json'
-      artifactsDirectory: $(XES_VPACKMANIFESTDIRECTORY)
-      prTimeOut: 5
-

build/pipelines/templates-v2/job-test-project.yml

@@ -1,99 +0,0 @@
-parameters:
-  configuration: 'Release'
-  platform: ''
-  testLogPath: '$(Build.BinariesDirectory)\$(BuildPlatform)\$(BuildConfiguration)\testsOnBuildMachine.wtl'
-  inputArtifactStem: ''
-  outputArtifactStem: ''
-
-jobs:
-- job: Test${{ parameters.platform }}${{ parameters.configuration }}
-  displayName: Test ${{ parameters.platform }} ${{ parameters.configuration }}
-  variables:
-    BuildConfiguration: ${{ parameters.configuration }}
-    BuildPlatform: ${{ parameters.platform }}
-    ${{ if eq(parameters.platform, 'x86') }}:
-      OutputBuildPlatform: Win32
-    ${{ else }}:
-      OutputBuildPlatform: ${{ parameters.platform }}
-    Terminal.BinDir: $(Build.SourcesDirectory)/bin/$(OutputBuildPlatform)/$(BuildConfiguration)
-  pool:
-    ${{ if eq(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-      ${{ if ne(parameters.platform, 'ARM64') }}:
-        name: SHINE-OSS-Testing-x64
-      ${{ else }}:
-        name: SHINE-OSS-Testing-arm64
-    ${{ if ne(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
-      ${{ if ne(parameters.platform, 'ARM64') }}:
-        name: SHINE-INT-Testing-x64
-      ${{ else }}:
-        name: SHINE-INT-Testing-arm64
-
-  steps:
-  - checkout: self
-    submodules: false
-    clean: true
-    fetchDepth: 1
-    fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
-
-  - task: DownloadPipelineArtifact@2
-    displayName: Download artifacts
-    inputs:
-      artifactName: build-${{ parameters.platform }}-$(BuildConfiguration)${{ parameters.inputArtifactStem }}
-      downloadPath: $(Terminal.BinDir)
-
-  - task: PowerShell@2
-    displayName: 'Run Unit Tests'
-    inputs:
-      targetType: filePath
-      filePath: build\scripts\Run-Tests.ps1
-      arguments: -MatchPattern '*unit.test*.dll' -Platform '$(OutputBuildPlatform)' -Configuration '$(BuildConfiguration)' -LogPath '${{ parameters.testLogPath }}' -Root "$(Terminal.BinDir)"
-
-  - ${{ if or(eq(parameters.platform, 'x64'), eq(parameters.platform, 'arm64')) }}:
-    - task: PowerShell@2
-      displayName: 'Run Feature Tests'
-      inputs:
-        targetType: filePath
-        filePath: build\scripts\Run-Tests.ps1
-        arguments: -MatchPattern '*feature.test*.dll' -Platform '$(OutputBuildPlatform)' -Configuration '$(BuildConfiguration)' -LogPath '${{ parameters.testLogPath }}' -Root "$(Terminal.BinDir)"
-
-  - task: PowerShell@2
-    displayName: 'Convert Test Logs from WTL to xUnit format'
-    condition: always()
-    inputs:
-      targetType: filePath
-      filePath: build\Helix\ConvertWttLogToXUnit.ps1
-      arguments: -WttInputPath '${{ parameters.testLogPath }}' -WttSingleRerunInputPath 'unused.wtl' -WttMultipleRerunInputPath 'unused2.wtl' -XUnitOutputPath 'onBuildMachineResults.xml' -TestNamePrefix '$(BuildConfiguration).$(BuildPlatform)'
-
-  - task: PowerShell@2
-    displayName: 'Manually log test failures'
-    condition: always()
-    inputs:
-      targetType: filePath
-      filePath: build\Helix\OutputTestErrorsForAzureDevops.ps1
-      arguments: -XUnitOutputPath 'onBuildMachineResults.xml'
-
-  - task: PublishTestResults@2
-    displayName: 'Upload converted test logs'
-    condition: always()
-    inputs:
-      testResultsFormat: 'xUnit' # Options: JUnit, NUnit, VSTest, xUnit, cTest
-      testResultsFiles: '**/onBuildMachineResults.xml'
-      testRunTitle: 'On Build Machine Tests' # Optional
-      buildPlatform: $(BuildPlatform) # Optional
-      buildConfiguration: $(BuildConfiguration) # Optional
-
-  - task: CopyFiles@2
-    displayName: 'Copy result logs to Artifacts'
-    condition: always()
-    inputs:
-      Contents: |
-       **/*.wtl
-       **/*onBuildMachineResults.xml
-       ${{ parameters.testLogPath }}
-      TargetFolder: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/$(BuildPlatform)/test-logs'
-      OverWrite: true
-      flattenFolders: true
-
-  - publish: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/$(BuildPlatform)/test-logs'
-    artifact: test-logs-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.outputArtifactStem }}
-    condition: always()

build/pipelines/templates-v2/pipeline-full-release-build.yml

@@ -1,181 +0,0 @@
-# This build should never run as CI or against a pull request.
-trigger: none
-
-parameters:
-  - name: branding
-    type: string
-    default: Release
-  - name: buildTerminal
-    type: boolean
-    default: true
-  - name: buildConPTY
-    type: boolean
-    default: false
-  - name: buildWPF
-    type: boolean
-    default: false
-  - name: pgoBuildMode
-    type: string
-    default: Optimize
-    values:
-      - Optimize
-      - Instrument
-      - None
-  - name: buildConfigurations
-    type: object
-    default:
-      - Release
-  - name: buildPlatforms
-    type: object
-    default:
-      - x64
-      - x86
-      - arm64
-  - name: codeSign
-    type: boolean
-    default: true
-  - name: generateSbom
-    type: boolean
-    default: true
-  - name: terminalInternalPackageVersion
-    type: string
-    default: '0.0.8'
-
-  - name: publishSymbolsToPublic
-    type: boolean
-    default: true
-  - name: symbolExpiryTime
-    type: string
-    default: 36530 # This is the default from PublishSymbols@2
-  - name: publishVpackToWindows
-    type: boolean
-    default: false
-
-  - name: extraPublishJobs
-    type: object
-    default: []
-  - name: pool
-    type: object
-    default:
-      name: SHINE-INT-S # By default, send jobs to the small agent pool.
-      demands: ImageOverride -equals SHINE-VS17-Latest
-
-variables:
-  - template: variables-nuget-package-version.yml
-    parameters:
-      branding: ${{ parameters.branding }}
-
-resources:
-  repositories:
-  - repository: self
-    type: git
-    ref: main
-
-stages:
-  - stage: Build
-    displayName: Build
-    pool: ${{ parameters.pool }}
-    dependsOn: []
-    jobs:
-      - template: ./job-build-project.yml
-        parameters:
-          pool:
-            name: SHINE-INT-L # Run the compilation on the large agent pool, rather than the default small one.
-            demands: ImageOverride -equals SHINE-VS17-Latest
-          branding: ${{ parameters.branding }}
-          buildTerminal: ${{ parameters.buildTerminal }}
-          buildConPTY: ${{ parameters.buildConPTY }}
-          buildWPF: ${{ parameters.buildWPF }}
-          pgoBuildMode: ${{ parameters.pgoBuildMode }}
-          buildConfigurations: ${{ parameters.buildConfigurations }}
-          buildPlatforms: ${{ parameters.buildPlatforms }}
-          generateSbom: ${{ parameters.generateSbom }}
-          codeSign: ${{ parameters.codeSign }}
-          beforeBuildSteps: # Right before we build, lay down the universal package and localizations
-            - task: PkgESSetupBuild@12
-              displayName: Package ES - Setup Build
-              inputs:
-                disableOutputRedirect: true
-
-            - task: UniversalPackages@0
-              displayName: Download terminal-internal Universal Package
-              inputs:
-                feedListDownload: 2b3f8893-a6e8-411f-b197-a9e05576da48
-                packageListDownload: e82d490c-af86-4733-9dc4-07b772033204
-                versionListDownload: ${{ parameters.terminalInternalPackageVersion }}
-
-            - template: ./steps-fetch-and-prepare-localizations.yml
-              parameters:
-                includePseudoLoc: true
-
-      - ${{ if eq(parameters.buildWPF, true) }}:
-        # Add an Any CPU build flavor for the WPF control bits
-        - template: ./job-build-project.yml
-          parameters:
-            # This job is allowed to run on the default small pool.
-            jobName: BuildWPF
-            branding: ${{ parameters.branding }}
-            buildTerminal: false
-            buildWPFDotNetComponents: true
-            buildConfigurations: ${{ parameters.buildConfigurations }}
-            buildPlatforms:
-              - Any CPU
-            generateSbom: ${{ parameters.generateSbom }}
-            codeSign: ${{ parameters.codeSign }}
-            beforeBuildSteps:
-              - task: PkgESSetupBuild@12
-                displayName: Package ES - Setup Build
-                inputs:
-                  disableOutputRedirect: true
-              # WPF doesn't need the localizations or the universal package, but if it does... put them here.
-
-  - stage: Package
-    displayName: Package
-    pool: ${{ parameters.pool }}
-    dependsOn: [Build]
-    jobs:
-      - ${{ if eq(parameters.buildTerminal, true) }}:
-        - template: ./job-merge-msix-into-bundle.yml
-          parameters:
-            jobName: Bundle
-            branding: ${{ parameters.branding }}
-            buildConfigurations: ${{ parameters.buildConfigurations }}
-            buildPlatforms: ${{ parameters.buildPlatforms }}
-            generateSbom: ${{ parameters.generateSbom }}
-            codeSign: ${{ parameters.codeSign }}
-
-      - ${{ if eq(parameters.buildConPTY, true) }}:
-        - template: ./job-package-conpty.yml
-          parameters:
-            buildConfigurations: ${{ parameters.buildConfigurations }}
-            buildPlatforms: ${{ parameters.buildPlatforms }}
-            generateSbom: ${{ parameters.generateSbom }}
-            codeSign: ${{ parameters.codeSign }}
-
-      - ${{ if eq(parameters.buildWPF, true) }}:
-        - template: ./job-build-package-wpf.yml
-          parameters:
-            buildConfigurations: ${{ parameters.buildConfigurations }}
-            buildPlatforms: ${{ parameters.buildPlatforms }}
-            generateSbom: ${{ parameters.generateSbom }}
-            codeSign: ${{ parameters.codeSign }}
-
-  - stage: Publish
-    displayName: Publish
-    pool: ${{ parameters.pool }}
-    dependsOn: [Build, Package]
-    jobs:
-      # We only support the vpack for Release builds that include Terminal
-      - ${{ if and(containsValue(parameters.buildConfigurations, 'Release'), parameters.buildTerminal, parameters.publishVpackToWindows) }}:
-        - template: ./job-submit-windows-vpack.yml
-          parameters:
-            buildConfiguration: Release
-            generateSbom: ${{ parameters.generateSbom }}
-
-      - template: ./job-publish-symbols.yml
-        parameters:
-          includePublicSymbolServer: ${{ parameters.publishSymbolsToPublic }}
-          symbolExpiryTime: ${{ parameters.symbolExpiryTime }}
-
-      - ${{ parameters.extraPublishJobs }}
-...

build/pipelines/templates-v2/pipeline-onebranch-full-release-build.yml

@@ -1,265 +0,0 @@
-parameters:
-  - name: official
-    type: boolean
-    default: false
-  - name: branding
-    type: string
-    default: Release
-    values:
-      - Release
-      - Preview
-      - Canary
-      - Dev
-  - name: buildTerminal
-    type: boolean
-    default: true
-  - name: buildConPTY
-    type: boolean
-    default: false
-  - name: buildWPF
-    type: boolean
-    default: false
-  - name: pgoBuildMode
-    type: string
-    default: Optimize
-    values:
-      - Optimize
-      - Instrument
-      - None
-  - name: buildConfigurations
-    type: object
-    default:
-      - Release
-  - name: buildPlatforms
-    type: object
-    default:
-      - x64
-      - x86
-      - arm64
-  - name: codeSign
-    type: boolean
-    default: true
-  - name: terminalInternalPackageVersion
-    type: string
-    default: '0.0.8'
-
-  - name: publishSymbolsToPublic
-    type: boolean
-    default: true
-  - name: symbolExpiryTime
-    type: string
-    default: 36530 # This is the default from PublishSymbols@2
-  - name: publishVpackToWindows
-    type: boolean
-    default: false
-
-  - name: extraPublishJobs
-    type: object
-    default: []
-
-resources:
-  repositories:
-  - repository: templates
-    type: git
-    name: OneBranch.Pipelines/GovernedTemplates
-    ref: refs/heads/main
-
-extends:
-  ${{ if eq(parameters.official, true) }}:
-    template: v2/Microsoft.Official.yml@templates # https://aka.ms/obpipelines/templates
-  ${{ else }}:
-    template: v2/Microsoft.NonOfficial.yml@templates
-  parameters:
-    featureFlags:
-      WindowsHostVersion: 1ESWindows2022
-    platform:
-      name: 'windows_undocked'
-      product: 'Windows Terminal'
-    cloudvault: # https://aka.ms/obpipelines/cloudvault
-      enabled: false
-    globalSdl: # https://aka.ms/obpipelines/sdl
-      tsa:
-        enabled: true
-        configFile: '$(Build.SourcesDirectory)\build\config\tsa.json'
-      binskim:
-        break: false
-        scanOutputDirectoryOnly: true
-      policheck:
-        break: false
-        severity: Note
-      baseline:
-        baselineFile: '$(Build.SourcesDirectory)\build\config\release.gdnbaselines'
-        suppressionSet: default
-
-    stages:
-      - stage: Build
-        displayName: Build
-        dependsOn: []
-        jobs:
-          - template: ./build/pipelines/templates-v2/job-build-project.yml@self
-            parameters:
-              pool: { type: windows }
-              variables:
-                ob_git_checkout: false # This job checks itself out
-                ob_git_skip_checkout_none: true
-                ob_outputDirectory: $(JobOutputDirectory)
-                ob_artifactBaseName: $(JobOutputArtifactName)
-              publishArtifacts: false # Handled by OneBranch
-              branding: ${{ parameters.branding }}
-              buildTerminal: ${{ parameters.buildTerminal }}
-              buildConPTY: ${{ parameters.buildConPTY }}
-              buildWPF: ${{ parameters.buildWPF }}
-              pgoBuildMode: ${{ parameters.pgoBuildMode }}
-              buildConfigurations: ${{ parameters.buildConfigurations }}
-              buildPlatforms: ${{ parameters.buildPlatforms }}
-              generateSbom: false # this is handled by onebranch
-              removeAllNonSignedFiles: true # appease the overlords
-              codeSign: ${{ parameters.codeSign }}
-              beforeBuildSteps: # Right before we build, lay down the universal package and localizations
-                - task: PkgESSetupBuild@12
-                  displayName: Package ES - Setup Build
-                  inputs:
-                    disableOutputRedirect: true
-
-                - task: UniversalPackages@0
-                  displayName: Download terminal-internal Universal Package
-                  inputs:
-                    feedListDownload: 2b3f8893-a6e8-411f-b197-a9e05576da48
-                    packageListDownload: e82d490c-af86-4733-9dc4-07b772033204
-                    versionListDownload: ${{ parameters.terminalInternalPackageVersion }}
-
-                - template: ./build/pipelines/templates-v2/steps-fetch-and-prepare-localizations.yml@self
-                  parameters:
-                    includePseudoLoc: true
-
-          - ${{ if eq(parameters.buildWPF, true) }}:
-            # Add an Any CPU build flavor for the WPF control bits
-            - template: ./build/pipelines/templates-v2/job-build-project.yml@self
-              parameters:
-                pool: { type: windows }
-                variables:
-                  ob_git_checkout: false # This job checks itself out
-                  ob_git_skip_checkout_none: true
-                  ob_outputDirectory: $(JobOutputDirectory)
-                  ob_artifactBaseName: $(JobOutputArtifactName)
-                publishArtifacts: false # Handled by OneBranch
-                jobName: BuildWPF
-                branding: ${{ parameters.branding }}
-                buildTerminal: false
-                buildWPFDotNetComponents: true
-                buildConfigurations: ${{ parameters.buildConfigurations }}
-                buildPlatforms:
-                  - Any CPU
-                generateSbom: false # this is handled by onebranch
-                removeAllNonSignedFiles: true # appease the overlords
-                codeSign: ${{ parameters.codeSign }}
-                beforeBuildSteps:
-                  - task: PkgESSetupBuild@12
-                    displayName: Package ES - Setup Build
-                    inputs:
-                      disableOutputRedirect: true
-                  # WPF doesn't need the localizations or the universal package, but if it does... put them here.
-
-      - stage: Package
-        displayName: Package
-        dependsOn: [Build]
-        jobs:
-          - ${{ if eq(parameters.buildTerminal, true) }}:
-            - template: ./build/pipelines/templates-v2/job-merge-msix-into-bundle.yml@self
-              parameters:
-                pool: { type: windows }
-                variables:
-                  ob_git_checkout: false # This job checks itself out
-                  ob_git_skip_checkout_none: true
-                  ob_outputDirectory: $(JobOutputDirectory)
-                  ob_artifactBaseName: $(JobOutputArtifactName)
-                  ### This job is also in charge of submitting the vpack to Windows if it's enabled
-                  ob_createvpack_enabled: ${{ and(parameters.buildTerminal, parameters.publishVpackToWindows) }}
-                  ob_updateOSManifest_enabled: ${{ and(parameters.buildTerminal, parameters.publishVpackToWindows) }}
-                  ### If enabled above, these options are in play.
-                  ob_createvpack_packagename: 'WindowsTerminal.app'
-                  ob_createvpack_owneralias: 'conhost@microsoft.com'
-                  ob_createvpack_description: 'VPack for the Windows Terminal Application'
-                  ob_createvpack_targetDestinationDirectory: '$(Destination)'
-                  ob_createvpack_propsFile: false
-                  ob_createvpack_provData: true
-                  ob_createvpack_metadata: '$(Build.SourceVersion)'
-                  ob_createvpack_topLevelRetries: 0
-                  ob_createvpack_failOnStdErr: true
-                  ob_createvpack_taskLogVerbosity: Detailed
-                  ob_createvpack_verbose: true
-                  ob_createvpack_vpackdirectory: '$(JobOutputDirectory)\vpack'
-                  ob_updateOSManifest_gitcheckinConfigPath: '$(Build.SourcesDirectory)\build\config\GitCheckin.json'
-                  # We're skipping the 'fetch' part of the OneBranch rules, but that doesn't mean
-                  # that it doesn't expect to have downloaded a manifest directly to some 'destination'
-                  # folder that it can then update and upload.
-                  # Effectively: it says "destination" but it means "source"
-                  # DH: Don't ask why.
-                  ob_updateOSManifest_destination: $(XES_VPACKMANIFESTDIRECTORY)
-                  ob_updateOSManifest_skipFetch: true
-                publishArtifacts: false # Handled by OneBranch
-                jobName: Bundle
-                branding: ${{ parameters.branding }}
-                buildConfigurations: ${{ parameters.buildConfigurations }}
-                buildPlatforms: ${{ parameters.buildPlatforms }}
-                generateSbom: false # Handled by onebranch
-                codeSign: ${{ parameters.codeSign }}
-                afterBuildSteps:
-                  # This directory has to exist, even if we aren't using createvpack, because the Guardian rules demand it.
-                  - pwsh: |-
-                      New-Item "$(JobOutputDirectory)/vpack" -Type Directory
-                    displayName: Make sure the vpack directory exists
-
-                  - ${{ if parameters.publishVpackToWindows }}:
-                    - pwsh: |-
-                        Copy-Item -Verbose -Path "$(MsixBundlePath)" -Destination (Join-Path "$(JobOutputDirectory)/vpack" 'Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle')
-                      displayName: Stage msixbundle for vpack
-
-          - ${{ if eq(parameters.buildConPTY, true) }}:
-            - template: ./build/pipelines/templates-v2/job-package-conpty.yml@self
-              parameters:
-                pool: { type: windows }
-                variables:
-                  ob_git_checkout: false # This job checks itself out
-                  ob_git_skip_checkout_none: true
-                  ob_outputDirectory: $(JobOutputDirectory)
-                  ob_artifactBaseName: $(JobOutputArtifactName)
-                publishArtifacts: false # Handled by OneBranch
-                buildConfigurations: ${{ parameters.buildConfigurations }}
-                buildPlatforms: ${{ parameters.buildPlatforms }}
-                generateSbom: false # this is handled by onebranch
-                codeSign: ${{ parameters.codeSign }}
-
-          - ${{ if eq(parameters.buildWPF, true) }}:
-            - template: ./build/pipelines/templates-v2/job-build-package-wpf.yml@self
-              parameters:
-                pool: { type: windows }
-                variables:
-                  ob_git_checkout: false # This job checks itself out
-                  ob_git_skip_checkout_none: true
-                  ob_outputDirectory: $(JobOutputDirectory)
-                  ob_artifactBaseName: $(JobOutputArtifactName)
-                publishArtifacts: false # Handled by OneBranch
-                buildConfigurations: ${{ parameters.buildConfigurations }}
-                buildPlatforms: ${{ parameters.buildPlatforms }}
-                generateSbom: false # this is handled by onebranch
-                codeSign: ${{ parameters.codeSign }}
-
-      - stage: Publish
-        displayName: Publish
-        dependsOn: [Build, Package]
-        jobs:
-          - template: ./build/pipelines/templates-v2/job-publish-symbols.yml@self
-            parameters:
-              pool: { type: windows }
-              includePublicSymbolServer: ${{ parameters.publishSymbolsToPublic }}
-              symbolPatGoesInTaskInputs: true # onebranch tries to muck with the PAT variable, so we need to change how it get the PAT
-              symbolExpiryTime: ${{ parameters.symbolExpiryTime }}
-              variables:
-                ob_git_checkout: false # This job checks itself out
-                ob_git_skip_checkout_none: true
-                ob_outputDirectory: $(Build.ArtifactStagingDirectory)
-                # Without this, OneBranch will nerf our symbol tasks
-                ob_symbolsPublishing_enabled: true
-
-          - ${{ parameters.extraPublishJobs }}

build/pipelines/templates-v2/steps-create-signing-config.yml

@@ -1,35 +0,0 @@
-parameters:
-  - name: stage
-    type: string
-  - name: outFile
-    type: string
-  - name: fragments
-    type: string
-
-# This build step template takes all files named "esrp.STAGE.batch.*.json"
-# and merges them into a single output signing config.
-#
-# We generate the batch signing config by sticking together multiple "batches".
-# The filter below (with Fragments) works by splitting the filename, esrp.s.batch.x.json,
-# to get 'x' and then checking whether x is in Fragments.
-# We have to manually strip comments out of the batch fragments due to https://github.com/PowerShell/PowerShell/issues/14553
-
-steps:
-  - pwsh: |-
-      $SignBatchFiles = (Get-Item build/config/esrp.${{ parameters.stage }}.batch.*.json)
-      $Fragments = "${{ parameters.fragments }}"
-      If (-Not [String]::IsNullOrWhiteSpace($Fragments)) {
-        $FragmentList = $Fragments -Split ";"
-        If ($FragmentList.Length -Gt 0) {
-          $SignBatchFiles = $SignBatchFiles | Where-Object { ($_.Name -Split '\.')[3] -In $FragmentList }
-        }
-      }
-      Write-Host "Found $(@($SignBatchFiles).Length) Signing Configs"
-      Write-Host ($SignBatchFiles.Name -Join ";")
-      $FinalSignConfig = @{
-        Version = "1.0.0";
-        UseMinimatch = $false;
-        SignBatches = @($SignBatchFiles | ForEach-Object { Get-Content $_ | Where-Object { $_ -NotMatch "^\s*\/\/" } | ConvertFrom-Json -Depth 10 });
-      }
-      $FinalSignConfig | ConvertTo-Json -Depth 10 | Out-File -Encoding utf8 "${{ parameters.outFile }}"
-    displayName: Merge ${{ parameters.stage }} signing configs (${{ parameters.outFile }})

build/pipelines/templates-v2/steps-download-bin-dir-artifact.yml

@@ -1,24 +0,0 @@
-parameters:
-  - name: buildConfigurations
-    type: object
-  - name: buildPlatforms
-    type: object
-  - name: artifactStem
-    type: string
-    default: ''
-
-steps:
-- ${{ each configuration in parameters.buildConfigurations }}:
-  - ${{ each platform in parameters.buildPlatforms }}:
-    - task: DownloadPipelineArtifact@2
-      displayName: Download artifacts for ${{ platform }} ${{ configuration }}
-      inputs:
-        # Make sure to download the entire artifact, because it includes the SPDX SBOM
-        artifactName: build-${{ platform }}-${{ configuration }}${{ parameters.artifactStem }}
-        # Downloading to the source directory should ensure that the later SBOM generator can see the earlier SBOMs.
-        ${{ if eq(platform, 'x86') }}:
-          downloadPath: '$(Build.SourcesDirectory)/bin/Win32/${{ configuration }}'
-        ${{ elseif eq(platform, 'Any CPU') }}:
-          downloadPath: '$(Build.SourcesDirectory)/bin/AnyCPU/${{ configuration }}'
-        ${{ else }}:
-          downloadPath: '$(Build.SourcesDirectory)/bin/${{ platform }}/${{ configuration }}'