HACK: Add Version to the propsheet

.clang-format

@@ -1,97 +0,0 @@
-
-AccessModifierOffset: -4
-AlignAfterOpenBracket: Align
-AllowAllArgumentsOnNextLine: true
-AlignConsecutiveMacros: false
-AlignConsecutiveAssignments: false
-AlignConsecutiveDeclarations: false
-AllowAllConstructorInitializersOnNextLine: true
-AlignEscapedNewlines: Left
-AlignOperands: true
-AlignTrailingComments: false
-AllowAllParametersOfDeclarationOnNextLine: false
-AllowShortBlocksOnASingleLine: Never
-AllowShortFunctionsOnASingleLine: Inline
-AllowShortCaseLabelsOnASingleLine: false
-AllowShortIfStatementsOnASingleLine: Never
-#AllowShortLambdasOnASingleLine: Inline
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakAfterReturnType: None
-AlwaysBreakBeforeMultilineStrings: false
-AlwaysBreakTemplateDeclarations: Yes
-BinPackArguments: false
-BinPackParameters: false
-BraceWrapping:
-  AfterCaseLabel: true
-  AfterClass: true
-  AfterControlStatement: true
-  AfterEnum: true
-  AfterFunction: true
-  AfterNamespace: true
-  AfterObjCDeclaration: true
-  AfterStruct: true
-  AfterUnion: true
-  AfterExternBlock: false
-  BeforeCatch: true
-  BeforeElse: true
-  IndentBraces: false
-  SplitEmptyFunction: true
-  SplitEmptyRecord: true
-  SplitEmptyNamespace: true
-BreakBeforeBinaryOperators: None
-BreakBeforeBraces: Custom
-BreakBeforeTernaryOperators: false
-BreakConstructorInitializers: AfterColon
-BreakInheritanceList: AfterColon
-ColumnLimit: 0
-CommentPragmas: "suppress"
-CompactNamespaces: false
-ConstructorInitializerAllOnOneLineOrOnePerLine: true
-ConstructorInitializerIndentWidth: 4
-ContinuationIndentWidth: 4
-Cpp11BracedListStyle: false
-DeriveLineEnding: true
-DerivePointerAlignment: false
-FixNamespaceComments: false
-IncludeBlocks: Regroup
-IncludeCategories:
-    - Regex: '^.*(precomp|pch|stdafx)'
-      Priority: -1
-    - Regex: '^".*"'
-      Priority: 1
-    - Regex: '^<.*>'
-      Priority: 2
-    - Regex: '.*'
-      Priority: 3
-IndentCaseLabels: false
-IndentPPDirectives: None
-IndentWidth: 4
-IndentWrappedFunctionNames: false
-KeepEmptyLinesAtTheStartOfBlocks: false
-MacroBlockBegin: "BEGIN_TEST_METHOD_PROPERTIES|BEGIN_MODULE|BEGIN_TEST_CLASS|BEGIN_TEST_METHOD"
-MacroBlockEnd: "END_TEST_METHOD_PROPERTIES|END_MODULE|END_TEST_CLASS|END_TEST_METHOD"
-MaxEmptyLinesToKeep: 1
-NamespaceIndentation: All
-PointerAlignment: Left
-ReflowComments: false
-SortIncludes: false
-SortUsingDeclarations: true
-SpaceAfterCStyleCast: false
-SpaceAfterLogicalNot: false
-SpaceAfterTemplateKeyword: false
-SpaceBeforeAssignmentOperators: true
-SpaceBeforeCpp11BracedList: false
-SpaceBeforeCtorInitializerColon: true
-SpaceBeforeInheritanceColon: true
-SpaceBeforeParens: ControlStatements
-SpaceBeforeRangeBasedForLoopColon: true
-SpaceInEmptyParentheses: false
-SpacesBeforeTrailingComments: 1
-SpacesInAngles: false
-SpacesInCStyleCastParentheses: false
-SpacesInContainerLiterals: false
-SpacesInParentheses: false
-SpacesInSquareBrackets: false
-Standard: Latest
-TabWidth: 4
-UseTab: Never

.config/dotnet-tools.json

@@ -1,12 +0,0 @@
-{
-  "version": 1,
-  "isRoot": true,
-  "tools": {
-    "XamlStyler.Console": {
-      "version": "3.2008.4",
-      "commands": [
-        "xstyler"
-      ]
-    }
-  }
-}

.github/ISSUE_TEMPLATE/Bug_Report.md

@@ -0,0 +1,39 @@
+---
+name: Bug report 🐛
+about: Report errors or unexpected behavior
+title: "Bug Report"
+labels: ''
+assignees: ''
+
+---
+
+<!--
+This bug tracker is monitored by Windows Terminal development team and other technical folks.
+
+**Important: When reporting BSODs or security issues, DO NOT attach memory dumps, logs, or traces to Github issues**.
+Instead, send dumps/traces to secure@microsoft.com, referencing this GitHub issue.
+
+Please use this form and describe your issue, concisely but precisely, with as much detail as possible.
+
+-->
+
+# Environment
+
+```none
+Windows build number: [run "ver" at a command prompt]
+Windows Terminal version (if applicable):
+
+Any other software?
+```
+
+# Steps to reproduce
+
+<!-- A description of how to trigger this bug. -->
+
+# Expected behavior
+
+<!-- A description of what you're expecting, possibly containing screenshots or reference material. -->
+
+# Actual behavior
+
+<!-- What's actually happening? -->

.github/ISSUE_TEMPLATE/Bug_Report.yml

@@ -1,53 +0,0 @@
-name: "Bug report 🐛"
-description: Report errors or unexpected behavior
-body:
-- type: markdown
-  attributes:
-    value: |
-      Please make sure to [search for existing issues](https://github.com/microsoft/terminal/issues) before filing a new one!
-
-      If this is an application crash, please also provide a [Feedback Hub](https://aka.ms/terminal-feedback-hub) submission link so we can find your diagnostic data on the backend. Use the category "Apps > Windows Terminal" and choose "Share My Feedback" after submission to get the link.
-
-- type: input
-  attributes:
-    label: Windows Terminal version (or Windows build number)
-    placeholder: "10.0.19042.0, 1.7.3651.0"
-    description: |
-      If you are reporting an issue in Windows Terminal, you can find the version in the about dialog.
-
-      If you are reporting an issue with the Windows Console, please run `ver` or `[Environment]::OSVersion`.
-  validations:
-    required: true
-
-- type: textarea
-  attributes:
-    label: Other Software
-    description: If you're reporting a bug about our interaction with other software, what software? What versions?
-    placeholder: |
-      vim 8.2 (inside WSL)
-      OpenSSH_for_Windows_8.1p1
-      My Cool Application v0.3 (include a code snippet if it would help!)
-  validations:
-    required: false
-
-- type: textarea
-  attributes:
-    label: Steps to reproduce
-    placeholder: Tell us the steps required to trigger your bug.
-  validations:
-    required: true
-
-- type: textarea
-  attributes:
-    label: Expected Behavior
-    description: If you want to include screenshots, paste them into the markdown editor below.
-    placeholder: What were you expecting?
-  validations:
-    required: false
-
-- type: textarea
-  attributes:
-    label: Actual Behavior
-    placeholder: What happened instead?
-  validations:
-    required: true

.github/ISSUE_TEMPLATE/Documentation_Issue.md

@@ -1,7 +1,7 @@
 ---
-name: "Documentation Issue 📚"
+name: Documentation Issue 📚
 about: Report issues in our documentation
-title: ''
+title: "Documentation Issue"
 labels: Issue-Docs
 assignees: ''
 

.github/ISSUE_TEMPLATE/Feature_Request.md

@@ -1,35 +1,21 @@
----
-name: "Feature Request/Idea 🚀"
-about: Suggest a new feature or improvement (this does not mean you have to implement
-  it)
-title: ''
-labels: Issue-Feature
-assignees: ''
-
----
-
-<!-- 
-🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨
-
-I ACKNOWLEDGE THE FOLLOWING BEFORE PROCEEDING:
-1. If I delete this entire template and go my own path, the core team may close my issue without further explanation or engagement.
-2. If I list multiple bugs/concerns in this one issue, the core team may close my issue without further explanation or engagement.
-3. If I write an issue that has many duplicates, the core team may close my issue without further explanation or engagement (and without necessarily spending time to find the exact duplicate ID number).
-4. If I leave the title incomplete when filing the issue, the core team may close my issue without further explanation or engagement.
-5. If I file something completely blank in the body, the core team may close my issue without further explanation or engagement.
-
-All good? Then proceed!
--->
-
-# Description of the new feature/enhancement
-
-<!-- 
-A clear and concise description of what the problem is that the new feature would solve.
-Describe why and how a user would use this new functionality (if applicable).
--->
-
-# Proposed technical implementation details (optional)
-
-<!-- 
-A clear and concise description of what you want to happen.
--->
+---
+name: Feature Request/Idea 🚀
+about: Suggest a new feature or improvement (this does not mean you have to implement it)
+title: "Feature Request"
+labels: Issue-Feature
+assignees: ''
+
+---
+
+# Summary of the new feature/enhancement
+
+<!-- 
+A clear and concise description of what the problem is that the new feature would solve.
+Describe why and how a user would use this new functionality (if applicable).
+-->
+
+# Proposed technical implementation details (optional)
+
+<!-- 
+A clear and concise description of what you want to happen.
+-->

.github/ISSUE_TEMPLATE/Guidance_Issue.md

@@ -0,0 +1,10 @@
+---
+name: Community Guidance Request ✨
+about: Suggest somewhere the Windows Terminal Team needs to provide community guidance through new documentation or process.
+title: "Guidance"
+labels: Issue-Docs
+assignees: 'bitcrazed'
+
+---
+
+<!-- What needs to change? Who is responsible for it? Why is it an open question? -->

.github/ISSUE_TEMPLATE/config.yml

@@ -1,12 +0,0 @@
-blank_issues_enabled: true
-
-contact_links:
-  - name: Microsoft Security Response Center 🔐
-    url: https://msrc.microsoft.com/create-report
-    about: Please report security vulnerabilities here.
-  - name: Windows Terminal Documentation issue 📄
-    url: https://github.com/MicrosoftDocs/terminal/issues/new
-    about: Report issues with the documentation for the Windows Terminal (in docs.microsoft.com/windows/terminal)
-  - name: Console Documentation issue 📄
-    url: https://github.com/MicrosoftDocs/console-docs/issues/new
-    about: Report issues with the documentation for the Console (in docs.microsoft.com/windows/console)

.github/PULL_REQUEST_TEMPLATE.md

@@ -9,12 +9,8 @@
 * [ ] Closes #xxx
 * [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
 * [ ] Tests added/passed
-* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
-* [ ] Schema updated.
+* [ ] Requires documentation to be updated
 * [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
 
 <!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
 ## Detailed Description of the Pull Request / Additional comments
-
-<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
-## Validation Steps Performed

.github/actions/spelling/advice.md

@@ -1,50 +0,0 @@
-<!-- markdownlint-disable MD033 MD041 -->
-<details>
-<summary>
-:pencil2: Contributor please read this
-</summary>
-
-By default the command suggestion will generate a file named based on your commit. That's generally ok as long as you add the file to your commit. Someone can reorganize it later.
-
-:warning: The command is written for posix shells. You can copy the contents of each `perl` command excluding the outer `'` marks and dropping any `'"`/`"'` quotation mark pairs into a file and then run `perl file.pl` from the root of the repository to run the code. Alternatively, you can manually insert the items...
-
-If the listed items are:
-
-* ... **misspelled**, then please *correct* them instead of using the command.
-* ... *names*, please add them to `.github/actions/spelling/allow/names.txt`.
-* ... APIs, you can add them to a file in `.github/actions/spelling/allow/`.
-* ... just things you're using, please add them to an appropriate file in `.github/actions/spelling/expect/`.
-* ... tokens you only need in one place and shouldn't *generally be used*, you can add an item in an appropriate file in `.github/actions/spelling/patterns/`.
-
-See the `README.md` in each directory for more information.
-
-:microscope: You can test your commits **without** *appending* to a PR by creating a new branch with that extra change and pushing it to your fork. The [check-spelling](https://github.com/marketplace/actions/check-spelling) action will run in response to your **push** -- it doesn't require an open pull request. By using such a branch, you can limit the number of typos your peers see you make. :wink:
-
-<details><summary>:clamp: If you see a bunch of garbage</summary>
-
-If it relates to a ...
-<details><summary>well-formed pattern</summary>
-
-See if there's a [pattern](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns) that would match it.
-
-If not, try writing one and adding it to a `patterns/{file}.txt`.
-
-Patterns are Perl 5 Regular Expressions - you can [test](
-https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your lines.
-
-Note that patterns can't match multiline strings.
-</details>
-<details><summary>binary-ish string</summary>
-
-Please add a file path to the `excludes.txt` file instead of just accepting the garbage.
-
-File paths are Perl 5 Regular Expressions - you can [test](
-https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your files.
-
-`^` refers to the file's path from the root of the repository, so `^README\.md$` would exclude [README.md](
-../tree/HEAD/README.md) (on whichever branch you're using).
-</details>
-
-</details>
-
-</details>

.github/actions/spelling/allow/README.md

@@ -1,21 +0,0 @@
-# Allow files are lists of words to accept unconditionally
-
-While check spelling will complain about an expected word
-which is no longer present, you can include things here even if
-they are not otherwise present in the repository.
-
-E.g., you could include a list of system APIs here, or potential
-contributors (so that if a future commit includes their name,
-it'll be accepted).
-
-## Files
-
-| File | Description |
-| ---- | ----------- |
-| [Allow](allow.txt) | Supplements to the dictionary |
-| [Chinese](chinese.txt) | Chinese words |
-| [Japanese](japanese.txt) | Japanese words |
-| [Microsoft](microsoft.txt) | Microsoft brand items |
-| [Fonts](fonts.txt) | Font names |
-| [Names](names.txt) | Names of people |
-| [Colors](colors.txt) | Names of color |

.github/actions/spelling/allow/allow.txt

@@ -1,53 +0,0 @@
-Apc
-apc
-clickable
-copyable
-dalet
-Dcs
-dcs
-dialytika
-dje
-downside
-downsides
-dze
-dzhe
-Enum'd
-ftp
-geeksforgeeks
-ghe
-gje
-hostname
-hostnames
-hyperlink
-hyperlinking
-hyperlinks
-img
-It'd
-kje
-lje
-maxed
-mru
-nje
-ogonek
-ok'd
-overlined
-postmodern
-ptys
-qof
-reimplementation
-reserialization
-reserialize
-reserializes
-runtimes
-shcha
-Sos
-timestamped
-tokenizes
-tonos
-tshe
-UIs
-versioned
-We'd
-wildcards
-yeru
-zhe

.github/actions/spelling/allow/apis.txt

@@ -1,152 +0,0 @@
-ACCEPTFILES
-ACCESSDENIED
-alignas
-alignof
-bitfield
-bitfields
-BUILDNUMBER
-charconv
-CLASSNOTAVAILABLE
-cmdletbinding
-COLORPROPERTY
-colspan
-COMDLG
-cstdint
-CXICON
-CYICON
-dataobject
-dcomp
-DERR
-dlldata
-DONTADDTORECENT
-DWORDLONG
-environstrings
-EXPCMDFLAGS
-EXPCMDSTATE
-FILTERSPEC
-FORCEFILESYSTEM
-FORCEMINIMIZE
-frac
-fullkbd
-futex
-GETDESKWALLPAPER
-GETHIGHCONTRAST
-Hashtable
-HIGHCONTRASTON
-HIGHCONTRASTW
-hotkeys
-href
-hrgn
-IActivation
-IApp
-IAppearance
-IAsync
-IBind
-IBox
-IClass
-IComparable
-IConnection
-ICustom
-IDialog
-IDirect
-IExplorer
-IFACEMETHOD
-IFile
-IInheritable
-IMap
-IObject
-iosfwd
-IPackage
-IPeasant
-IStorage
-istream
-IStringable
-ITab
-ITaskbar
-IUri
-IVirtual
-LCID
-llabs
-llu
-localtime
-lround
-LSHIFT
-msappx
-MULTIPLEUSE
-NCHITTEST
-NCLBUTTONDBLCLK
-NCRBUTTONDBLCLK
-NOAGGREGATION
-NOASYNC
-NOCHANGEDIR
-NOPROGRESS
-NOREDIRECTIONBITMAP
-NOREPEAT
-ntprivapi
-oaidl
-ocidl
-osver
-OSVERSIONINFOEXW
-otms
-OUTLINETEXTMETRICW
-overridable
-PAGESCROLL
-PICKFOLDERS
-pmr
-REGCLS
-RETURNCMD
-rfind
-roundf
-RSHIFT
-schandle
-semver
-serializer
-SHELLEXECUTEINFOW
-shobjidl
-SHOWMINIMIZED
-SINGLEUSE
-SIZENS
-smoothstep
-snprintf
-spsc
-sregex
-STDCPP
-STDMETHOD
-strchr
-streambuf
-Stubless
-Subheader
-Subpage
-syscall
-TBPF
-THEMECHANGED
-tmp
-tolower
-TTask
-TVal
-UPDATEINIFILE
-userenv
-wcsstr
-wcstoui
-winmain
-wpc
-wsregex
-wwinmain
-XDocument
-XElement
-xfacet
-xhash
-xiosbase
-xlocale
-xlocbuf
-xlocinfo
-xlocmes
-xlocmon
-xlocnum
-xloctime
-xmemory
-XParse
-xstddef
-xstring
-xtree
-xutility

.github/actions/spelling/allow/chinese.txt

@@ -1,5 +0,0 @@
-CHINESEBIG
-choseong
-Jongseong
-Jungseong
-ssangtikeut

.github/actions/spelling/allow/colors.txt

@@ -1,117 +0,0 @@
-alice
-aliceblue
-antiquewhite
-blanchedalmond
-blueviolet
-burlywood
-cadetblue
-cornflowerblue
-cornsilk
-cyan
-darkblue
-darkcyan
-darkgoldenrod
-darkgray
-darkgreen
-darkgrey
-darkkhaki
-darkmagenta
-darkolivegreen
-darkorange
-darkorchid
-darkred
-darksalmon
-darkseagreen
-darkslateblue
-darkslategray
-darkslategrey
-darkturquoise
-darkviolet
-deeppink
-deepskyblue
-dimgray
-dimgrey
-dodgerblue
-firebrick
-floralwhite
-forestgreen
-gainsboro
-ghostwhite
-greenyellow
-hotpink
-indian
-indianred
-lavenderblush
-lawngreen
-lemonchiffon
-lightblue
-lightcoral
-lightcyan
-lightgoldenrod
-lightgoldenrodyellow
-lightgray
-lightgreen
-lightgrey
-lightpink
-lightsalmon
-lightseagreen
-lightskyblue
-lightslateblue
-lightslategray
-lightslategrey
-lightsteelblue
-lightyellow
-limegreen
-mediumaquamarine
-mediumblue
-mediumorchid
-mediumpurple
-mediumseagreen
-mediumslateblue
-mediumspringgreen
-mediumturquoise
-mediumvioletred
-midnightblue
-mintcream
-mistyrose
-navajo
-navajowhite
-navyblue
-oldlace
-olivedrab
-orangered
-palegoldenrod
-palegreen
-paleturquoise
-palevioletred
-papayawhip
-peachpuff
-peru
-powderblue
-rebecca
-rebeccapurple
-rosybrown
-royalblue
-saddlebrown
-sandybrown
-seagreen
-sienna
-skyblue
-slateblue
-slategray
-slategrey
-springgreen
-steelblue
-violetred
-webgray
-webgreen
-webgrey
-webmaroon
-webpurple
-whitesmoke
-xaroon
-xray
-xreen
-xrey
-xurple
-yellowgreen

.github/actions/spelling/allow/fonts.txt

@@ -1,9 +0,0 @@
-Consolas
-emoji
-emojis
-Extralight
-Gabriola
-Iosevka
-MDL
-Monofur
-Segoe

.github/actions/spelling/allow/japanese.txt

@@ -1,4 +0,0 @@
-arigatoo
-doomo
-Kaomojis
-TATEGAKI

.github/actions/spelling/allow/math.txt

@@ -1,3 +0,0 @@
-isnan
-powf
-sqrtf

.github/actions/spelling/allow/microsoft.txt

@@ -1,64 +0,0 @@
-ACLs
-ADMINS
-altform
-altforms
-appendwttlogging
-appx
-appxbundle
-appxerror
-appxmanifest
-backplating
-bitmaps
-BOMs
-CPLs
-cpptools
-cppvsdbg
-CPRs
-DACL
-DACLs
-diffs
-disposables
-dotnetfeed
-DTDs
-DWINRT
-enablewttlogging
-Intelli
-LKG
-mfcribbon
-microsoft
-microsoftonline
-msixbundle
-muxc
-netcore
-osgvsowi
-pgc
-pgo
-pgosweep
-powerrename
-powershell
-propkey
-pscustomobject
-robocopy
-SACLs
-Shobjidl
-Skype
-sxs
-Sysinternals
-sysnative
-systemroot
-taskkill
-tasklist
-tdbuildteamid
-unvirtualized
-VCRT
-vcruntime
-Virtualization
-visualstudio
-vscode
-VSTHRD
-wlk
-wslpath
-wtl
-wtt
-wttlog
-Xamarin

.github/actions/spelling/allow/names.txt

@@ -1,77 +0,0 @@
-Anup
-austdi
-Ballmer
-bhoj
-Bhojwani
-carlos
-dhowett
-Diviness
-dsafa
-duhowett
-ekg
-ethanschoonover
-Firefox
-Gatta
-glsl
-Gravell
-Grie
-Griese
-Hernan
-Howett
-Illhardt
-iquilezles
-jantari
-jerrysh
-Kaiyu
-kimwalisch
-KMehrain
-KODELIFE
-Kodelife
-Kourosh
-kowalczyk
-leonmsft
-Lepilleur
-lukesampson
-Manandhar
-mbadolato
-Mehrain
-menger
-mgravell
-michaelniksa
-michkap
-migrie
-mikegr
-mikemaccana
-miloush
-miniksa
-niksa
-nvaccess
-nvda
-oising
-oldnewthing
-opengl
-osgwiki
-pabhojwa
-paulcam
-pauldotknopf
-PGP
-Pham
-Rincewind
-rprichard
-Schoonover
-shadertoy
-Somuah
-sonph
-sonpham
-stakx
-thereses
-Walisch
-Wirt
-Wojciech
-zadjii
-Zamor
-Zamora
-zamora
-Zoey
-zorio
-Zverovich

.github/actions/spelling/excludes.txt

@@ -1,79 +0,0 @@
-(?:(?i)\.png$)
-(?:^|/)dirs$
-(?:^|/)go\.mod$
-(?:^|/)go\.sum$
-(?:^|/)package-lock\.json$
-(?:^|/)sources(?:|\.dep)$
-SUMS$
-\.ai$
-\.bmp$
-\.cer$
-\.class$
-\.crl$
-\.crt$
-\.csr$
-\.dll$
-\.DS_Store$
-\.eot$
-\.eps$
-\.exe$
-\.gif$
-\.graffle$
-\.gz$
-\.icns$
-\.ico$
-\.jar$
-\.jpeg$
-\.jpg$
-\.key$
-\.lib$
-\.lock$
-\.map$
-\.min\..
-\.mp3$
-\.mp4$
-\.otf$
-\.pbxproj$
-\.pdf$
-\.pem$
-\.psd$
-\.runsettings$
-\.sig$
-\.so$
-\.svg$
-\.svgz$
-\.tar$
-\.tgz$
-\.ttf$
-\.vsdx$
-\.woff
-\.xcf$
-\.xls
-\.xpm$
-\.yml$
-\.zip$
-^consolegit2gitfilters\.json$
-^dep/
-^doc/reference/master-sequence-list.csv$
-^doc/reference/UTF8-torture-test\.txt$
-^oss/
-^src/host/ft_uia/run\.bat$
-^src/host/runft\.bat$
-^src/host/runut\.bat$
-^src/interactivity/onecore/BgfxEngine\.
-^src/renderer/wddmcon/WddmConRenderer\.
-^src/terminal/adapter/ut_adapter/run\.bat$
-^src/terminal/parser/delfuzzpayload\.bat$
-^src/terminal/parser/ft_fuzzer/run\.bat$
-^src/terminal/parser/ft_fuzzer/VTCommandFuzzer\.cpp$
-^src/terminal/parser/ft_fuzzwrapper/run\.bat$
-^src/terminal/parser/ut_parser/run\.bat$
-^src/tools/integrity/packageuwp/ConsoleUWP\.appxSources$
-^src/tools/lnkd/lnkd\.bat$
-^src/tools/pixels/pixels\.bat$
-^src/tools/texttests/fira\.txt$
-^src/tools/U8U16Test/(?:fr|ru|zh)\.txt$
-^src/types/ut_types/UtilsTests.cpp$
-^\.github/actions/spelling/
-^\.gitignore$
-^\XamlStyler.json$

.github/actions/spelling/expect/README.md

@@ -1,13 +0,0 @@
-The contents of each `.txt` file in this directory are merged together.
-
-* [alphabet](alphabet.txt) is a sample for alphabet related items
-* [web](web.txt) is a sample for web/html related items
-* [expect](expect.txt) is the main list of expected items -- there is nothing
-particularly special about the file name (beyond the extension which is
-important).
-
-These terms are things which temporarily exist in the project, but which
-aren't necessarily words.
-
-If something is a word that could come and go, it probably belongs in a
-[dictionary](../dictionary/README.md).

.github/actions/spelling/expect/alphabet.txt

@@ -1,51 +0,0 @@
-AAAa
-AAAAA
-AAAAAAAAAAAAA
-AAAAAABBBBBBCCC
-AAAAABBBBBBBCCC
-AAAAABBBBBBCCC
-AAAAABCCCCCCCCC
-AAAAADCCCCCCCCC
-abcd
-abcd
-abcde
-abcdef
-ABCDEFG
-ABCDEFGH
-ABCDEFGHIJ
-abcdefghijk
-ABCDEFGHIJKLMNO
-abcdefghijklmnop
-ABCDEFGHIJKLMNOPQRST
-abcdefghijklmnopqrstuvwxyz
-ABCG
-ABE
-abf
-BBBBB
-BBBBBBBB
-BBBBBBBBBBBBBBDDDD
-BBBBBCCC
-BBBBCCCCC
-BBGGRR
-CCE
-EFG
-EFGh
-QQQQQQQQQQABCDEFGHIJ
-QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJPQRSTQQQQQQQQQQ
-qrstuvwxyz
-qwerty
-QWERTYUIOP
-qwertyuiopasdfg
-YYYYYYYDDDDDDDDDDD
-ZAAZZ
-ZABBZ
-ZBAZZ
-ZBBBZ
-ZBBZZ
-ZYXWVUT
-ZZBBZ
-ZZZBB
-ZZZBZ
-ZZZZZ

.github/actions/spelling/expect/web.txt

@@ -1,16 +0,0 @@
-http
-www
-ecma
-rapidtables
-WCAG
-freedesktop
-ycombinator
-robertelder
-kovidgoyal
-leonerd
-fixterms
-winui
-appshellintegration
-cppreference
-gfycat
-Guake

.github/actions/spelling/patterns/0_n.txt

@@ -1,2 +0,0 @@
-\\native(?![a-z])
-\\nihilist(?![a-z])

.github/actions/spelling/patterns/0_r.txt

@@ -1,8 +0,0 @@
-\\registry(?![a-z])
-\\release(?![a-z])
-\\resources?(?![a-z])
-\\result(?![a-z])
-\\resultmacros(?![a-z])
-\\rules(?![a-z])
-\\renderer(?![a-z])
-\\rectread(?![a-z])

.github/actions/spelling/patterns/0_t.txt

@@ -1,13 +0,0 @@
-\\telemetry(?![a-z])
-\\templates(?![a-z])
-\\term(?![a-z])
-\\terminal(?![a-z])
-\\terminalcore(?![a-z])
-\\terminalinput(?![a-z])
-\\testlist(?![a-z])
-\\testmd(?![a-z])
-\\testpasses(?![a-z])
-\\tests(?![a-z])
-\\thread(?![a-z])
-\\tools(?![a-z])
-\\types(?![a-z])

.github/actions/spelling/patterns/README.md

@@ -1,16 +0,0 @@
-The contents of each `.txt` file in this directory are merged together.
-Each line is a Perl 5 regular expression.
-Nothing is guaranteed about the order in which they're merged.
--- If this is a problem, please reach out.
-
-Note: order of the contents of these files can matter.
-Lines from an individual file are handled in file order.
-Files are selected in alphabetical order.
-
-* [n](0_n.txt), [r](0_r.txt), and [t](0_t.txt) are specifically to work around
-a quirk in the spell checker:
-it often sees C strings of the form "Hello\nwerld". And would prefer to
-spot the typo of `werld`.
-* [patterns](patterns.txt) is the main list -- there is nothing
-particularly special about the file name (beyond the extension which is
-important).

.github/actions/spelling/patterns/patterns.txt

@@ -1,25 +0,0 @@
-https://(?:(?:[-a-zA-Z0-9?&=]*\.|)microsoft\.com)/[-a-zA-Z0-9?&=_#\/.]*
-https://aka\.ms/[-a-zA-Z0-9?&=\/_]*
-https://www\.itscj\.ipsj\.or\.jp/iso-ir/[-0-9]+\.pdf
-https://www\.vt100\.net/docs/[-a-zA-Z0-9#_\/.]*
-https://www.w3.org/[-a-zA-Z0-9?&=\/_#]*
-https://(?:(?:www\.|)youtube\.com|youtu.be)/[-a-zA-Z0-9?&=]*
-https://(?:[a-z-]+\.|)github(?:usercontent|)\.com/[-a-zA-Z0-9?%&=_\/.]*
-https://www.xfree86.org/[-a-zA-Z0-9?&=\/_#]*
-[Pp]ublicKeyToken="?[0-9a-fA-F]{16}"?
-(?:[{"]|UniqueIdentifier>)[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}(?:[}"]|</UniqueIdentifier)
-(?:0[Xx]|\\x|U\+|#)[a-f0-9A-FGgRr]{2,}[Uu]?[Ll]{0,2}\b
-microsoft/cascadia-code\@[0-9a-fA-F]{40}
-\d+x\d+Logo
-Scro\&ll
-# selectionInput.cpp
- :\\windows\\syste\b
-TestUtils::VerifyExpectedString\(tb, L"[^"]+"
-(?:hostSm|mach)\.ProcessString\(L"[^"]+"
-\b([A-Za-z])\g{-1}{3,}\b
-0x[0-9A-Za-z]+
-Base64::s_(?:En|De)code\(L"[^"]+"
-VERIFY_ARE_EQUAL\(L"[^"]+"
-"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789\+/"
-std::memory_order_[\w]+
-D2DERR_SHADER_COMPILE_FAILED

.github/actions/spelling/reject.txt

@@ -1,22 +0,0 @@
-^attache$
-^attacher$
-^attachers$
-^spae$
-^spaebook$
-^spaecraft$
-^spaed$
-^spaedom$
-^spaeing$
-^spaeings$
-^spae-man$
-^spaeman$
-^spaer$
-^Spaerobee$
-^spaes$
-^spaewife$
-^spaewoman$
-^spaework$
-^spaewright$
-^wether$
-^wethers$
-^wetherteg$

.github/linters/.markdown-lint.yml

@@ -1,42 +0,0 @@
----
-###########################
-###########################
-## Markdown Linter rules ##
-###########################
-###########################
-
-# Linter rules doc:
-# - https://github.com/DavidAnson/markdownlint
-#
-# Note:
-# To comment out a single error:
-#   <!-- markdownlint-disable -->
-#   any violations you want
-#   <!-- markdownlint-restore -->
-#
-# To run the linter locally:
-# 1. install the npm package:
-#    `npm install -g markdownlint-cli`
-# 2. Then run it in the root of the repo with
-#    `markdownlint -c .github\linters\.markdown-lint.yml ./*.md`
-
-###############
-# Rules by id #
-###############
-MD004: false                  # Unordered list style
-MD007:
-  indent: 2                   # Unordered list indentation
-MD013:
-  line_length: 400            # Line length 80 is far to short
-MD024: false                  # Allow multiple headings with same content
-MD026:
-  punctuation: ".,;:!。，；:"  # List of not allowed
-MD029: false                  # Ordered list item prefix
-MD033: false                  # Allow inline HTML
-MD036: false                  # Emphasis used instead of a heading
-MD040: false                  # Allow ``` blocks in md files with no language specified
-
-#################
-# Rules by tags #
-#################
-blank_lines: false  # Error on blank lines

.github/workflows/spelling.yml

@@ -1,19 +0,0 @@
-name: Spell checking
-on:
-  pull_request_target:
-  push:
-
-jobs:
-  build:
-    name: Spell checking
-    runs-on: ubuntu-latest
-    steps:
-    - name: checkout-merge
-      if: "contains(github.event_name, 'pull_request')"
-      uses: actions/checkout@v2.0.0
-      with:
-        ref: refs/pull/${{github.event.pull_request.number}}/merge
-    - name: checkout
-      if: "!contains(github.event_name, 'pull_request')"
-      uses: actions/checkout@v2.0.0
-    - uses: check-spelling/check-spelling@v0.0.18

.gitignore

@@ -48,7 +48,6 @@ dlldata.c
 project.lock.json
 artifacts/
 
-*_h.h
 *_i.c
 *_p.c
 *_i.h
@@ -145,13 +144,13 @@ publish/
 # Publish Web Output
 *.[Pp]ublish.xml
 *.azurePubxml
-# TODO: Comment the next line if you want to check in your web deploy settings
+# TODO: Comment the next line if you want to checkin your web deploy settings
 # but database connection strings (with potential passwords) will be unencrypted
 *.pubxml
 *.publishproj
 
 # Microsoft Azure Web App publish settings. Comment the next line if you want to
-# check in your Azure Web App publish settings, but sensitive information contained
+# checkin your Azure Web App publish settings, but sensitive information contained
 # in these scripts will be unencrypted
 PublishScripts/
 
@@ -163,7 +162,7 @@ PublishScripts/
 !**/packages/build/
 # Uncomment if necessary however generally it will be regenerated when needed
 #!**/packages/repositories.config
-# NuGet v3's project.json files produces more ignorable files
+# NuGet v3's project.json files produces more ignoreable files
 *.nuget.props
 *.nuget.targets
 
@@ -262,14 +261,8 @@ build*.rec
 build*.wrn
 build*.metadata
 
-# MS Build binary logs
-*.binlog
-
 # .razzlerc.cmd file - used by dev environment
 tools/.razzlerc.*
-# .PowershellModules - if one needs a powershell module dependency, one
-# can save it here. used by tools/OpenConsole.psm1
-.PowershellModules
 # message compiler output
 MSG*.bin
 /*.exe
@@ -282,4 +275,3 @@ MSG*.bin
 **/Unmerged/*
 profiles.json
 *.metaproj
-*.swp

.nuget/packages.config

@@ -1,4 +1,4 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
   <package id="vswhere" version="2.6.7" />
-</packages>
+</packages>

.vscode/extensions.json

@@ -1,13 +0,0 @@
-{
-    // See https://go.microsoft.com/fwlink/?LinkId=827846 to learn about workspace recommendations.
-    // Extension identifier format: ${publisher}.${name}. Example: vscode.csharp
-
-    // List of extensions which should be recommended for users of this workspace.
-    "recommendations": [
-        "ms-vscode.cpptools"
-    ],
-    // List of extensions recommended by VS Code that should not be recommended for users of this workspace.
-    "unwantedRecommendations": [
-        
-    ]
-}

.vscode/launch.json

@@ -1,24 +0,0 @@
-{
-    // Use IntelliSense to learn about possible attributes.
-    // Hover to view descriptions of existing attributes.
-    // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "name": "Debug OpenConsole by Launching (x64, debug)",
-            "type": "cppvsdbg",
-            "request": "launch",
-            "program": "${workspaceFolder}\\bin\\x64\\debug\\openconsole.exe",
-            "args": [],
-            "stopAtEntry": false,
-            "cwd": "${workspaceFolder}",
-            "environment": [],
-        },
-        {
-            "name": "Debug Terminal by Attaching (You go build/register/launch it first.)",
-            "type": "cppvsdbg",
-            "request": "attach",
-            "processId": "${command:pickProcess}"
-        }
-    ]
-}

.vscode/settings.json

@@ -1,105 +0,0 @@
-{
-    "C_Cpp.default.browse.databaseFilename": "${workspaceFolder}\\.vscode\\.BROWSE.VC.DB",
-    "C_Cpp.default.browse.path": [
-        "${workspaceFolder}"
-    ],
-    "C_Cpp.loggingLevel": "None",
-    "files.associations": {
-        "xstring": "cpp",
-        "*.idl": "cpp",
-        "array": "cpp",
-        "future": "cpp",
-        "istream": "cpp",
-        "memory": "cpp",
-        "tuple": "cpp",
-        "type_traits": "cpp",
-        "utility": "cpp",
-        "variant": "cpp",
-        "xlocmes": "cpp",
-        "xlocmon": "cpp",
-        "xlocnum": "cpp",
-        "xloctime": "cpp",
-        "multi_span": "cpp",
-        "pointers": "cpp",
-        "vector": "cpp",
-        "bitset": "cpp",
-        "deque": "cpp",
-        "initializer_list": "cpp",
-        "list": "cpp",
-        "queue": "cpp",
-        "random": "cpp",
-        "regex": "cpp",
-        "stack": "cpp",
-        "xhash": "cpp",
-        "xtree": "cpp",
-        "xutility": "cpp",
-        "span": "cpp",
-        "string_span": "cpp",
-        "algorithm": "cpp",
-        "atomic": "cpp",
-        "bit": "cpp",
-        "cctype": "cpp",
-        "charconv": "cpp",
-        "chrono": "cpp",
-        "clocale": "cpp",
-        "cmath": "cpp",
-        "compare": "cpp",
-        "complex": "cpp",
-        "concepts": "cpp",
-        "condition_variable": "cpp",
-        "cstdarg": "cpp",
-        "cstddef": "cpp",
-        "cstdint": "cpp",
-        "cstdio": "cpp",
-        "cstdlib": "cpp",
-        "cstring": "cpp",
-        "ctime": "cpp",
-        "cwchar": "cpp",
-        "cwctype": "cpp",
-        "exception": "cpp",
-        "filesystem": "cpp",
-        "fstream": "cpp",
-        "functional": "cpp",
-        "iomanip": "cpp",
-        "ios": "cpp",
-        "iosfwd": "cpp",
-        "iostream": "cpp",
-        "iterator": "cpp",
-        "limits": "cpp",
-        "locale": "cpp",
-        "map": "cpp",
-        "memory_resource": "cpp",
-        "mutex": "cpp",
-        "new": "cpp",
-        "numeric": "cpp",
-        "optional": "cpp",
-        "ostream": "cpp",
-        "ratio": "cpp",
-        "set": "cpp",
-        "shared_mutex": "cpp",
-        "sstream": "cpp",
-        "stdexcept": "cpp",
-        "stop_token": "cpp",
-        "streambuf": "cpp",
-        "string": "cpp",
-        "system_error": "cpp",
-        "thread": "cpp",
-        "typeinfo": "cpp",
-        "unordered_map": "cpp",
-        "unordered_set": "cpp",
-        "xfacet": "cpp",
-        "xiosbase": "cpp",
-        "xlocale": "cpp",
-        "xlocbuf": "cpp",
-        "xlocinfo": "cpp",
-        "xmemory": "cpp",
-        "xstddef": "cpp",
-        "xtr1common": "cpp"
-    },
-    "files.exclude": {
-        "**/bin/**": true,
-        "**/obj/**": true,
-        "**/packages/**": true,
-        "**/generated files/**": true
-    }
-}

.vscode/tasks.json

@@ -1,121 +0,0 @@
-{
-    "version": "2.0.0",
-    "tasks": [
-        {
-            "type": "process",
-            "label": "Build Terminal/Console",
-            "command": "powershell.exe",
-            "args": [
-              "-Command",
-              "Import-Module ${workspaceFolder}\\tools\\OpenConsole.psm1;",
-              "Set-MsBuildDevEnvironment;",
-              "$project = switch(\"${input:buildProjectChoice}\"){OpenConsole{\"Conhost\\Host_EXE\"} Terminal{\"Terminal\\CascadiaPackage\"}  TermControl{\"Terminal\\TerminalControl\"}};",
-              "$target = switch(\"${input:buildModeChoice}\"){Build{\"\"} Rebuild{\":Rebuild\"} Clean{\":Clean\"}};",
-              "$target = $project + $target;",
-              "msbuild",
-              "${workspaceFolder}\\OpenConsole.sln",
-              "/p:Configuration=${input:configChoice}",
-              "/p:Platform=${input:platformChoice}",
-              "/p:AppxSymbolPackageEnabled=false", // This takes a long time, so false if we don't really need it.
-              "/t:$target",
-              "/m", // Parallel builds
-              "/verbosity:minimal"
-            ],
-            "problemMatcher": ["$msCompile"],
-            "group": {
-              "kind": "build",
-              "isDefault": true
-            },
-            "runOptions": {
-                "reevaluateOnRerun": false,
-                "instanceLimit": 1,
-                "runOn": "default"
-            }
-        },
-        {
-            "type": "process",
-            "label": "Register Windows Terminal x64 Debug",
-            "command": "powershell.exe",
-            "args": [
-              "-Command",
-              "Import-Module ${workspaceFolder}\\tools\\OpenConsole.psm1;",
-              "Set-MsBuildDevEnvironment;",
-              "Set-Location -Path ${workspaceFolder}\\src\\cascadia\\CascadiaPackage\\AppPackages\\CascadiaPackage_0.0.1.0_x64_Debug_Test;",
-              "if ((Get-AppxPackage -Name 'WindowsTerminalDev*') -ne $null) { Remove-AppxPackage 'WindowsTerminalDev_0.0.1.0_x64__8wekyb3d8bbwe'};",
-              "New-Item ..\\loose -Type Directory -Force;",
-              "makeappx unpack /v /o /p .\\CascadiaPackage_0.0.1.0_x64_Debug.msix /d ..\\Loose\\;",
-              "Add-AppxPackage -Path ..\\loose\\AppxManifest.xml -Register -ForceUpdateFromAnyVersion -ForceApplicationShutdown"
-            ],
-            "problemMatcher": ["$msCompile"],
-            "group": {
-              "kind": "build"
-            }
-        },
-        {
-            "type": "process",
-            "label": "Run Windows Terminal Dev",
-            "command": "wtd.exe",
-            "args": [
-            ],
-            "problemMatcher": ["$msCompile"],
-        },
-        {
-            "type": "process",
-            "label": "Run Code Format",
-            "command": "powershell.exe",
-            "args": [
-              "-Command",
-              "Import-Module ${workspaceFolder}\\tools\\OpenConsole.psm1;",
-              "Set-MsBuildDevEnvironment;",
-              "Invoke-CodeFormat",
-            ],
-            "problemMatcher": ["$msCompile"],
-        }
-    ],
-    "inputs":[
-        {
-            "id": "platformChoice",
-            "type": "pickString",
-            "description": "Processor architecture choice",
-            "options":[
-                "x64",
-                "x86",
-                "arm64"
-            ],
-            "default": "x64"
-        },
-        {
-            "id": "configChoice",
-            "type": "pickString",
-            "description": "Debug or release?",
-            "options":[
-                "Debug",
-                "Release"
-            ],
-            "default": "Debug"
-        },
-        {
-            "id": "buildModeChoice",
-            "type": "pickString",
-            "description": "Build, rebuild, or clean?",
-            "options":[
-                "Build",
-                "Rebuild",
-                "Clean"
-            ],
-            "default": "Build"
-        },
-        {
-            "id": "buildProjectChoice",
-            "type": "pickString",
-            "description": "OpenConsole or Terminal?",
-            "options":[
-                "OpenConsole",
-                "Terminal",
-                "TermControl"
-            ],
-            "default": "Terminal"
-        }
-
-    ]
-}

.vsconfig

@@ -17,7 +17,7 @@
     "Microsoft.Net.Component.4.5.TargetingPack",
     "Microsoft.VisualStudio.Component.DiagnosticTools",
     "Microsoft.VisualStudio.Component.Debugger.JustInTime",
-    "Microsoft.VisualStudio.Component.Windows10SDK.19041",
+    "Microsoft.VisualStudio.Component.Windows10SDK.18362",
     "Microsoft.VisualStudio.ComponentGroup.UWP.Support",
     "Microsoft.VisualStudio.Component.VC.CoreIde",
     "Microsoft.VisualStudio.ComponentGroup.NativeDesktop.Core",
@@ -25,10 +25,10 @@
     "Microsoft.VisualStudio.Component.VC.Redist.14.Latest",
     "Microsoft.VisualStudio.Component.VC.Tools.x86.x64",
     "Microsoft.VisualStudio.Component.VC.Tools.ARM64",
-    "Microsoft.VisualStudio.Component.VC.v142.x86.x64",
-    "Microsoft.VisualStudio.Component.VC.v142.ARM64",
+    "Microsoft.VisualStudio.Component.VC.v141.x86.x64",
+    "Microsoft.VisualStudio.Component.VC.v141.ARM64",
     "Microsoft.VisualStudio.ComponentGroup.UWP.VC",
-    "Microsoft.VisualStudio.ComponentGroup.UWP.VC.v142",
+    "Microsoft.VisualStudio.ComponentGroup.UWP.VC.v141",
     "Microsoft.VisualStudio.Component.UWP.VC.ARM64"
   ]
 }

CODE_OF_CONDUCT.md

@@ -1,9 +1,8 @@
-# Microsoft Open Source Code of Conduct
+# Code of Conduct
 
-This project has adopted the [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/).
+This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
+For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
 
-Resources:
-
-- [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/)
-- [Microsoft Code of Conduct FAQ](https://opensource.microsoft.com/codeofconduct/faq/)
-- Contact [opencode@microsoft.com](mailto:opencode@microsoft.com) with questions or concerns
+[conduct-code]: https://opensource.microsoft.com/codeofconduct/
+[conduct-FAQ]: https://opensource.microsoft.com/codeofconduct/faq/
+[conduct-email]: mailto:opencode@microsoft.com

CONTRIBUTING.md

@@ -1,165 +0,0 @@
-# Terminal Contributor's Guide
-
-Below is our guidance for how to report issues, propose new features, and submit contributions via Pull Requests (PRs).
-
-## Open Development Workflow
-
-The Windows Terminal team is VERY active in this GitHub Repo. In fact, we live in it all day long and carry out all our development in the open!
-
-When the team finds issues we file them in the repo. When we propose new ideas or think-up new features, we file new feature requests. When we work on fixes or features, we create branches and work on those improvements. And when PRs are reviewed, we review in public - including all the good, the bad, and the ugly parts.
-
-The point of doing all this work in public is to ensure that we are holding ourselves to a high degree of transparency, and so that the community sees that we apply the same processes and hold ourselves to the same quality-bar as we do to community-submitted issues and PRs. We also want to make sure that we expose our team culture and "tribal knowledge" that is inherent in any closely-knit team, which often contains considerable value to those new to the project who are trying to figure out "why the heck does this thing look/work like this???"
-
-### Repo Bot
-
-The team triages new issues several times a week. During triage, the team uses labels to categorize, manage, and drive the project workflow.
-
-We employ [a bot engine](https://github.com/microsoft/terminal/blob/main/doc/bot.md) to help us automate common processes within our workflow.
-
-We drive the bot by tagging issues with specific labels which cause the bot engine to close issues, merge branches, etc. This bot engine helps us keep the repo clean by automating the process of notifying appropriate parties if/when information/follow-up is needed, and closing stale issues/PRs after reminders have remained unanswered for several days.
-
-Therefore, if you do file issues, or create PRs, please keep an eye on your GitHub notifications. If you do not respond to requests for information, your issues/PRs may be closed automatically.
-
----
-## Reporting Security Issues
-
-**Please do not report security vulnerabilities through public GitHub issues.** Instead, please report them to the Microsoft Security Response Center (MSRC). See [SECURITY.md](./SECURITY.md) for more information.
-
-## Before you start, file an issue
-
-Please follow this simple rule to help us eliminate any unnecessary wasted effort & frustration, and ensure an efficient and effective use of everyone's time - yours, ours, and other community members':
-
-> 👉 If you have a question, think you've discovered an issue, would like to propose a new feature, etc., then find/file an issue **BEFORE** starting work to fix/implement it.
-
-### Search existing issues first
-
-Before filing a new issue, search existing open and closed issues first: This project is moving fast! It is likely someone else has found the problem you're seeing, and someone may be working on or have already contributed a fix!
-
-If no existing item describes your issue/feature, great - please file a new issue:
-
-### File a new Issue
-
-* Don't know whether you're reporting an issue or requesting a feature? File an issue
-* Have a question that you don't see answered in docs, videos, etc.? File an issue
-* Want to know if we're planning on building a particular feature? File an issue
-* Got a great idea for a new feature? File an issue/request/idea
-* Don't understand how to do something? File an issue
-* Found an existing issue that describes yours? Great - upvote and add additional commentary / info / repro-steps / etc.
-
-When you hit "New Issue", select the type of issue closest to what you want to report/ask/request:
-![New issue types](/doc/images/new-issue-template.png)
-
-### Complete the template
-
-**Complete the information requested in the issue template, providing as much information as possible**. The more information you provide, the more likely your issue/ask will be understood and implemented. Helpful information includes:
-
-* What device you're running (inc. CPU type, memory, disk, etc.)
-* What build of Windows your device is running
-
-  👉 Tip: Run the following in PowerShell Core
-
-  ```powershell
-  C:\> $PSVersionTable.OS
-  Microsoft Windows 10.0.18909
-  ```
-
-  ... or in Windows PowerShell
-
-  ```powershell
-  C:\> $PSVersionTable.BuildVersion
-
-  Major  Minor  Build  Revision
-  -----  -----  -----  --------
-  10     0      18912  1001
-  ```
-
-  ... or Cmd:
-
-  ```cmd
-  C:\> ver
-
-  Microsoft Windows [Version 10.0.18900.1001]
-  ```
-
-* What tools and apps you're using (e.g. VS 2019, VSCode, etc.)
-* Don't assume we're experts in setting up YOUR environment and don't assume we are experts in `<your distro/tool of choice>`. Teach us to help you!
-* **We LOVE detailed repro steps!** What steps do we need to take to reproduce the issue? Assume we love to read repro steps. As much detail as you can stand is probably _barely_ enough detail for us!
-* If you're reporting a particular character/glyph not rendering correctly, the specific Unicode codepoint would be MOST welcome (e.g. U+1F4AF, U+4382)
-* Prefer error message text where possible or screenshots of errors if text cannot be captured
-* We MUCH prefer text command-line script than screenshots of command-line script.
-* **If you intend to implement the fix/feature yourself then say so!** If you do not indicate otherwise we will assume that the issue is our to solve, or may label the issue as `Help-Wanted`.
-
-### DO NOT post "+1" comments
-
-> ⚠ DO NOT post "+1", "me too", or similar comments - they just add noise to an issue.
-
-If you don't have any additional info/context to add but would like to indicate that you're affected by the issue, upvote the original issue by clicking its [+😊] button and hitting 👍 (+1) icon. This way we can actually measure how impactful an issue is.
-
----
-
-## Contributing fixes / features
-
-For those able & willing to help fix issues and/or implement features ...
-
-### To Spec or not to Spec
-
-Some issues/features may be quick and simple to describe and understand. For such scenarios, once a team member has agreed with your approach, skip ahead to the section headed "Fork, Branch, and Create your PR", below.
-
-Small issues that do not require a spec will be labelled Issue-Bug or Issue-Task.
-
-However, some issues/features will require careful thought & formal design before implementation. For these scenarios, we'll request that a spec is written and the associated issue will be labeled Issue-Feature.
-
-Specs help collaborators discuss different approaches to solve a problem, describe how the feature will behave, how the feature will impact the user, what happens if something goes wrong, etc. Driving towards agreement in a spec, before any code is written, often results in simpler code, and less wasted effort in the long run.
-
-Specs will be managed in a very similar manner as code contributions so please follow the "[Fork, Branch and Create your PR](CONTRIBUTING.md#fork-clone-branch-and-create-your-pr)" section below.
-
-### Writing / Contributing-to a Spec
-
-To write/contribute to a spec: fork, branch and commit via PRs, as you would with any code changes.
-
-Specs are written in markdown, stored under the [`\doc\specs`](./doc/specs) folder and named `[issue id] - [spec description].md`.
-
-👉 **It is important to follow the spec templates and complete the requested information**. The available spec templates will help ensure that specs contain the minimum information & decisions necessary to permit development to begin. In particular, specs require you to confirm that you've already discussed the issue/idea with the team in an issue and that you provide the issue ID for reference.
-
-Team members will be happy to help review specs and guide them to completion.
-
-### Help Wanted
-
-Once the team have approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help%20Wanted).
-
----
-
-## Development
-
-### Fork, Clone, Branch and Create your PR
-
-Once you've discussed your proposed feature/fix/etc. with a team member, and you've agreed an approach or a spec has been written and approved, it's time to start development:
-
-1. Fork the repo if you haven't already
-1. Clone your fork locally
-1. Create & push a feature branch
-1. Create a [Draft Pull Request (PR)](https://github.blog/2019-02-14-introducing-draft-pull-requests/)
-1. Work on your changes
-1. Build and see if it works. Consult [How to build OpenConsole](./doc/building.md) if you have problems.
-
-### Testing
-
-Testing is a key component in the development workflow. Both Windows Terminal and Windows Console use TAEF(the Test Authoring and Execution Framework) as the main framework for testing.
-
-If your changes affect existing test cases, or you're working on brand new features and also the accompanying test cases, see [TAEF](./doc/TAEF.md) for more information about how to validate your work locally.
-
-### Code Review
-
-When you'd like the team to take a look, (even if the work is not yet fully-complete), mark the PR as 'Ready For Review' so that the team can review your work and provide comments, suggestions, and request changes. It may take several cycles, but the end result will be solid, testable, conformant code that is safe for us to merge.
-
-> ⚠ Remember: **changes you make may affect both Windows Terminal and Windows Console and may end up being re-incorporated into Windows itself!** Because of this, we will treat community PR's with the same level of scrutiny and rigor as commits submitted to the official Windows source by team members and partners.
-
-### Merge
-
-Once your code has been reviewed and approved by the requisite number of team members, it will be merged into the main branch. Once merged, your PR will be automatically closed.
-
----
-
-## Thank you
-
-Thank you in advance for your contribution! Now, [what's next on the list](https://github.com/microsoft/terminal/labels/Help%20Wanted)? 😜

NOTICE.md

@@ -1,299 +0,0 @@
-# NOTICES AND INFORMATION
-Do Not Translate or Localize
-
-This software incorporates material from third parties. Microsoft makes certain
-open source code available at [http://3rdpartysource.microsoft.com](http://3rdpartysource.microsoft.com), or you may
-send a check or money order for US $5.00, including the product name, the open
-source component name, and version number, to:
-
-```
-Source Code Compliance Team
-Microsoft Corporation
-One Microsoft Way
-Redmond, WA 98052
-USA
-```
-
-Notwithstanding any other terms, you may reverse engineer this software to the
-extent required to debug changes to any libraries licensed under the GNU Lesser
-General Public License.
-
-## jsoncpp
-
-**Source**: [https://github.com/open-source-parsers/jsoncpp](https://github.com/open-source-parsers/jsoncpp)
-
-### License
-
-```
-Copyright (c) 2007-2010 Baptiste Lepilleur and The JsonCpp Authors
-
-Permission is hereby granted, free of charge, to any person
-obtaining a copy of this software and associated documentation
-files (the "Software"), to deal in the Software without
-restriction, including without limitation the rights to use, copy,
-modify, merge, publish, distribute, sublicense, and/or sell copies
-of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
-BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-```
-
-## chromium/base/numerics
-
-**Source**: [https://github.com/chromium/chromium/tree/master/base/numerics](https://github.com/chromium/chromium/tree/master/base/numerics)
-
-### License
-
-```
-Copyright 2015 The Chromium Authors. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-   * Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-   * Redistributions in binary form must reproduce the above
-copyright notice, this list of conditions and the following disclaimer
-in the documentation and/or other materials provided with the
-distribution.
-   * Neither the name of Google Inc. nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-```
-
-## kimwalisch/libpopcnt
-
-**Source**: [https://github.com/kimwalisch/libpopcnt](https://github.com/kimwalisch/libpopcnt)
-
-### License
-
-```
-BSD 2-Clause License
-
-Copyright (c) 2016 - 2019, Kim Walisch
-Copyright (c) 2016 - 2019, Wojciech Muła
-
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-```
-
-## dynamic_bitset
-
-**Source**: [https://github.com/pinam45/dynamic_bitset](https://github.com/pinam45/dynamic_bitset)
-
-### License
-
-```
-MIT License
-
-Copyright (c) 2019 Maxime Pinard
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-
-```
-
-## \{fmt\}
-
-**Source**: [https://github.com/fmtlib/fmt](https://github.com/fmtlib/fmt)
-
-### License
-
-```
-MIT License
-
-Copyright (c) 2012 - present, Victor Zverovich
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
---- Optional exception to the license ---
-
-As an exception, if, as a result of your compiling your source code, portions
-of this Software are embedded into a machine-executable object form of such
-source code, you may redistribute such embedded portions in such object form
-without including the above copyright and permission notices.
-```
-
-## interval_tree
-
-**Source**: [https://github.com/ekg/IntervalTree](https://github.com/ekg/IntervalTree)
-
-### License
-
-```
-Copyright (c) 2011 Erik Garrison
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of
-this software and associated documentation files (the "Software"), to deal in
-the Software without restriction, including without limitation the rights to
-use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
-of the Software, and to permit persons to whom the Software is furnished to do
-so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-
-```
-
-
-## boost
-
-**Source**: [https://github.com/boostorg/boost](https://github.com/boostorg/boost)
-
-### License
-
-```
-Boost Software License - Version 1.0 - August 17th, 2003
-
-Permission is hereby granted, free of charge, to any person or organization
-obtaining a copy of the software and accompanying documentation covered by
-this license (the "Software") to use, reproduce, display, distribute,
-execute, and transmit the Software, and to prepare derivative works of the
-Software, and to permit third-parties to whom the Software is furnished to
-do so, all subject to the following:
-
-The copyright notices in the Software and this entire statement, including
-the above license grant, this restriction and the following disclaimer,
-must be included in all copies of the Software, in whole or in part, and
-all derivative works of the Software, unless such copies or derivative
-works are solely in the form of machine-executable object code generated by
-a source language processor.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
-SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
-FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-DEALINGS IN THE SOFTWARE.
-
-```
-
-# Microsoft Open Source
-
-This product also incorporates source code from other Microsoft open source projects, all licensed under the MIT license.
-
-## `GSL`
-
-**Source**: [https://github.com/microsoft/GSL](https://github.com/microsoft/GSL)
-
-## `Microsoft-UI-XAML`
-
-**Source**: [https://github.com/microsoft/Microsoft-UI-XAML](https://github.com/microsoft/Microsoft-UI-XAML)
-
-## `VirtualDesktopUtils`
-
-**Source**: [https://github.com/microsoft/PowerToys](https://github.com/microsoft/PowerToys)
-
-## `wil`
-
-**Source**: [https://github.com/microsoft/wil](https://github.com/microsoft/wil)
-
-### License
-
-```
-The MIT License
-
-Copyright (c) Microsoft Corporation. All rights reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
-```

NuGet.Config

@@ -1,14 +1,16 @@
 <?xml version="1.0" encoding="utf-8"?>
 <configuration>
     <packageSources>
-        <clear />
-        <!-- Dependencies that we can turn on to force override for testing purposes before uploading. -->
-        <!--<add key="Static Package Dependencies" value="dep\packages" />-->
-        <add key="TerminalDependencies" value="https://pkgs.dev.azure.com/ms/terminal/_packaging/TerminalDependencies/nuget/v3/index.json" />
+        <add key="NuGet.org" value="https://api.nuget.org/v3/index.json" />
+        <!-- Add repositories here to the list of available repositories -->
+        
+        <!-- Dependencies that we must carry because they're not on public nuget feeds right now. -->
+        <add key="Static Package Dependencies" value="dep\packages" />
+        
+        <!-- Internal NuGet feeds that may not be accessible outside Microsoft corporate network -->
+        <!--<add key="TAEF - internal" value="https://microsoft.pkgs.visualstudio.com/DefaultCollection/_packaging/Taef/nuget/v3/index.json" />
+        <add key="OpenConsole - Internal" value="https://microsoft.pkgs.visualstudio.com/_packaging/OpenConsole/nuget/v3/index.json" />-->
     </packageSources>
-    <disabledPackageSources>
-        <clear />
-    </disabledPackageSources>
     <config>
         <add key="repositorypath" value=".\packages" />
     </config>

README.md

@@ -1,322 +1,144 @@
-![terminal-logos](https://user-images.githubusercontent.com/48369326/115790869-4c852b00-a37c-11eb-97f1-f61972c7800c.png)
+# Welcome\! 
+#### This repository contains the source code for:
 
-# Welcome to the Windows Terminal, Console and Command-Line repo
+  * Windows Terminal
+  * The Windows console host (`conhost.exe`)
+  * Components shared between the two projects
+  * [ColorTool](https://github.com/Microsoft/Terminal/tree/master/src/tools/ColorTool)
+  * [Sample projects](https://github.com/Microsoft/Terminal/tree/master/samples) that show how to consume the Windows Console APIs
+  
+#### Other related repositories include:
+  * [Console API Documentation](https://github.com/MicrosoftDocs/Console-Docs/issues)
 
-This repository contains the source code for:
-
-* [Windows Terminal](https://aka.ms/terminal)
-* [Windows Terminal Preview](https://aka.ms/terminal-preview)
-* The Windows console host (`conhost.exe`)
-* Components shared between the two projects
-* [ColorTool](https://github.com/microsoft/terminal/tree/main/src/tools/ColorTool)
-* [Sample projects](https://github.com/microsoft/terminal/tree/main/samples)
-  that show how to consume the Windows Console APIs
-
-Related repositories include:
-
-* [Windows Terminal Documentation](https://docs.microsoft.com/windows/terminal)
-  ([Repo: Contribute to the docs](https://github.com/MicrosoftDocs/terminal))
-* [Console API Documentation](https://github.com/MicrosoftDocs/Console-Docs)
-* [Cascadia Code Font](https://github.com/Microsoft/Cascadia-Code)
-
-## Installing and running Windows Terminal
-
-> 🔴 Note: Windows Terminal requires Windows 10 1903 (build 18362) or later
-
-### Microsoft Store [Recommended]
-
-Install the [Windows Terminal from the Microsoft Store][store-install-link].
-This allows you to always be on the latest version when we release new builds
-with automatic upgrades.
-
-This is our preferred method.
-
-### Other install methods
-
-#### Via GitHub
-
-For users who are unable to install Windows Terminal from the Microsoft Store,
-released builds can be manually downloaded from this repository's [Releases
-page](https://github.com/microsoft/terminal/releases).
-
-Download the `Microsoft.WindowsTerminal_<versionNumber>.msixbundle` file from
-the **Assets** section. To install the app, you can simply double-click on the
-`.msixbundle` file, and the app installer should automatically run. If that
-fails for any reason, you can try the following command at a PowerShell prompt:
-
-```powershell
-# NOTE: If you are using PowerShell 7+, please run
-# Import-Module Appx -UseWindowsPowerShell
-# before using Add-AppxPackage.
-
-Add-AppxPackage Microsoft.WindowsTerminal_<versionNumber>.msixbundle
-```
-
-> 🔴 Note: If you install Terminal manually:
->
-> * Terminal will not auto-update when new builds are released so you will need
->   to regularly install the latest Terminal release to receive all the latest
->   fixes and improvements!
-
-#### Via Windows Package Manager CLI (aka winget)
-
-[winget](https://github.com/microsoft/winget-cli) users can download and install
-the latest Terminal release by installing the `Microsoft.WindowsTerminal`
-package:
-
-```powershell
-winget install --id=Microsoft.WindowsTerminal -e
-```
-
-#### Via Chocolatey (unofficial)
-
-[Chocolatey](https://chocolatey.org) users can download and install the latest
-Terminal release by installing the `microsoft-windows-terminal` package:
-
-```powershell
-choco install microsoft-windows-terminal
-```
-
-To upgrade Windows Terminal using Chocolatey, run the following:
-
-```powershell
-choco upgrade microsoft-windows-terminal
-```
-
-If you have any issues when installing/upgrading the package please go to the
-[Windows Terminal package
-page](https://chocolatey.org/packages/microsoft-windows-terminal) and follow the
-[Chocolatey triage process](https://chocolatey.org/docs/package-triage-process)
-
-#### Via Scoop (unofficial)
-
-[Scoop](https://scoop.sh) users can download and install the latest Terminal
-release by installing the `windows-terminal` package:
-
-```powershell
-scoop bucket add extras
-scoop install windows-terminal
-```
-
-To update Windows Terminal using Scoop, run the following:
-
-```powershell
-scoop update windows-terminal
-```
-
-If you have any issues when installing/updating the package, please search for
-or report the same on the [issues
-page](https://github.com/lukesampson/scoop-extras/issues) of Scoop Extras bucket
-repository.
-
----
-
-## Windows Terminal 2.0 Roadmap
-
-The plan for delivering Windows Terminal 2.0 [is described
-here](/doc/terminal-v2-roadmap.md) and will be updated as the project proceeds.
-
-## Project Build Status
+### Build Status
 
 Project|Build Status
 ---|---
-Terminal|[![Terminal Build Status](https://dev.azure.com/ms/terminal/_apis/build/status/terminal%20CI?branchName=main)](https://dev.azure.com/ms/terminal/_build?definitionId=136)
-ColorTool|![Colortool Build Status](https://microsoft.visualstudio.com/_apis/public/build/definitions/c93e867a-8815-43c1-92c4-e7dd5404f1e1/17023/badge)
+Terminal|[![Build Status](https://dev.azure.com/ms/Terminal/_apis/build/status/Terminal%20CI?branchName=master)](https://dev.azure.com/ms/Terminal/_build?definitionId=136)
+ColorTool|![](https://microsoft.visualstudio.com/_apis/public/build/definitions/c93e867a-8815-43c1-92c4-e7dd5404f1e1/17023/badge)
 
----
+# Terminal & Console Overview
 
-## Terminal & Console Overview
+Please take a few minutes to review the overview below before diving into the code:
 
-Please take a few minutes to review the overview below before diving into the
-code:
+## Windows Terminal
 
-### Windows Terminal
+Windows Terminal is a new, modern, feature-rich, productive terminal application for command-line users. It includes many of the features most frequently requested by the Windows command-line community including support for tabs, rich text, globalization, configurability, theming & styling, and more.
 
-Windows Terminal is a new, modern, feature-rich, productive terminal application
-for command-line users. It includes many of the features most frequently
-requested by the Windows command-line community including support for tabs, rich
-text, globalization, configurability, theming & styling, and more.
+The Terminal will also need to meet our goals and measures to ensure it remains fast, and efficient, and doesn't consume vast amounts of memory or power.
 
-The Terminal will also need to meet our goals and measures to ensure it remains
-fast and efficient, and doesn't consume vast amounts of memory or power.
+## The Windows console host
 
-### The Windows Console Host
+The Windows console host, `conhost.exe`, is Windows' original command-line user experience. It implements Windows' command-line infrastructure, and is responsible for hosting the Windows Console API, input engine, rendering engine, and user preferences. The console host code in this repository is the actual source from which the `conhost.exe` in Windows itself is built.
 
-The Windows Console host, `conhost.exe`, is Windows' original command-line user
-experience. It also hosts Windows' command-line infrastructure and the Windows
-Console API server, input engine, rendering engine, user preferences, etc. The
-console host code in this repository is the actual source from which the
-`conhost.exe` in Windows itself is built.
+Console's primary goal is to remain backwards-compatible with existing console subsystem applications.
 
-Since taking ownership of the Windows command-line in 2014, the team added
-several new features to the Console, including background transparency,
-line-based selection, support for [ANSI / Virtual Terminal
-sequences](https://en.wikipedia.org/wiki/ANSI_escape_code), [24-bit
-color](https://devblogs.microsoft.com/commandline/24-bit-color-in-the-windows-console/),
-a [Pseudoconsole
-("ConPTY")](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/),
-and more.
+Since assuming ownership of the Windows command-line in 2014, the team has added several new features to the Console, including window transparency, line-based selection, support for [ANSI / Virtual Terminal sequences](https://en.wikipedia.org/wiki/ANSI_escape_code), [24-bit color](https://devblogs.microsoft.com/commandline/24-bit-color-in-the-windows-console/), a [Pseudoconsole ("ConPTY")](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/), and more.
 
-However, because Windows Console's primary goal is to maintain backward
-compatibility, we have been unable to add many of the features the community
-(and the team) have been wanting for the last several years including tabs,
-unicode text, and emoji.
+However, because the Console's primary goal is to maintain backward compatibility, we've been unable to add many of the features the community has been asking for, and which we've been wanting to add for the last several years--like tabs!
 
 These limitations led us to create the new Windows Terminal.
 
-> You can read more about the evolution of the command-line in general, and the
-> Windows command-line specifically in [this accompanying series of blog
-> posts](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/)
-> on the Command-Line team's blog.
+## Shared Components
 
-### Shared Components
+While overhauling the Console, we've modernized its codebase considerably. We've cleanly separated logical entities into modules and classes, introduced some key extensibility points, replaced several old, home-grown collections and containers with safer, more efficient [STL containers](https://docs.microsoft.com/en-us/cpp/standard-library/stl-containers?view=vs-2019), and made the code simpler and safer by using Microsoft's [WIL](https://github.com/Microsoft/wil) header library.
 
-While overhauling Windows Console, we modernized its codebase considerably,
-cleanly separating logical entities into modules and classes, introduced some
-key extensibility points, replaced several old, home-grown collections and
-containers with safer, more efficient [STL
-containers](https://docs.microsoft.com/en-us/cpp/standard-library/stl-containers?view=vs-2019),
-and made the code simpler and safer by using Microsoft's [Windows Implementation
-Libraries - WIL](https://github.com/Microsoft/wil).
+This overhaul work resulted in the creation of several key components that would be useful for any terminal implementation on Windows, including a new DirectWrite-based text layout and rendering engine, a text buffer capable of storing both UTF-16 and UTF-8, and a VT parser/emitter.
 
-This overhaul resulted in several of Console's key components being available
-for re-use in any terminal implementation on Windows. These components include a
-new DirectWrite-based text layout and rendering engine, a text buffer capable of
-storing both UTF-16 and UTF-8, a VT parser/emitter, and more.
+## Building a new terminal
 
-### Creating the new Windows Terminal
+When we started building the new terminal application, we explored and evaluated several approaches and technology stacks. We ultimately decided that our goals would be best met by sticking with C++ and sharing the aforementioned modernized components, placing them atop the modern Windows application platform and UI framework.
 
-When we started planning the new Windows Terminal application, we explored and
-evaluated several approaches and technology stacks. We ultimately decided that
-our goals would be best met by continuing our investment in our C++ codebase,
-which would allow us to reuse several of the aforementioned modernized
-components in both the existing Console and the new Terminal. Further, we
-realized that this would allow us to build much of the Terminal's core itself as
-a reusable UI control that others can incorporate into their own applications.
+Further, we realized that this would allow us to build the terminal's renderer and input stack as a reusable Windows UI control that others can incorporate into their applications.
 
-The result of this work is contained within this repo and delivered as the
-Windows Terminal application you can download from the Microsoft Store, or
-[directly from this repo's
-releases](https://github.com/microsoft/terminal/releases).
+# FAQ
 
----
+## Where can I download Windows Terminal?
 
-## Resources
+### There are no binaries to download quite yet. 
 
-For more information about Windows Terminal, you may find some of these
-resources useful and interesting:
+The Windows Terminal is in the _very early_ alpha stage, and not ready for the general public quite yet. If you want to jump in early, you can try building it yourself from source. 
 
-* [Command-Line Blog](https://devblogs.microsoft.com/commandline)
-* [Command-Line Backgrounder Blog
-  Series](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/)
-* Windows Terminal Launch: [Terminal "Sizzle
-  Video"](https://www.youtube.com/watch?v=8gw0rXPMMPE&list=PLEHMQNlPj-Jzh9DkNpqipDGCZZuOwrQwR&index=2&t=0s)
-* Windows Terminal Launch: [Build 2019
-  Session](https://www.youtube.com/watch?v=KMudkRcwjCw)
-* Run As Radio: [Show 645 - Windows Terminal with Richard
-  Turner](http://www.runasradio.com/Shows/Show/645)
-* Azure Devops Podcast: [Episode 54 - Kayla Cinnamon and Rich Turner on DevOps
-  on the Windows
-  Terminal](http://azuredevopspodcast.clear-measure.com/kayla-cinnamon-and-rich-turner-on-devops-on-the-windows-terminal-team-episode-54)
-* Microsoft Ignite 2019 Session: [The Modern Windows Command Line: Windows
-  Terminal -
-  BRK3321](https://myignite.techcommunity.microsoft.com/sessions/81329?source=sessions)
+Otherwise, you'll need to wait until Mid-June for an official preview build to drop.
 
----
+## I built and ran the new Terminal, but I just get a blank window app!
 
-## FAQ
+Make sure you are building for your computer's architecture. If your box has a 64-bit Windows change your Solution Platform to x64.  
+To check your OS architecture go to Settings -> System -> About (or Win+X -> System) and under `Device specifications` check for the  `System type`
 
-### I built and ran the new Terminal, but it looks just like the old console
+## I built and ran the new Terminal, but it looks just like the old console! What gives?
 
-Cause: You're launching the incorrect solution in Visual Studio.
+Firstly, make sure you're building & deploying `CascadiaPackage` in Visual Studio, _NOT_ `Host.EXE`. `OpenConsole.exe` is just `conhost.exe`, the same old console you know and love. `opencon.cmd` will launch `openconsole.exe`, and unfortunately, `openterm.cmd` is currently broken.
 
-Solution: Make sure you're building & deploying the `CascadiaPackage` project in
-Visual Studio.
+Secondly, try pressing <kbd>Ctrl</kbd> + <kbd>T</kbd>. The tabs are hidden when you only have one tab by default. In the future, the UI will be dramatically different, but for now, the defaults are _supposed_ to look like the console defaults.
 
-> ⚠ Note: `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic
-> Windows Console that hosts Windows' command-line infrastructure. OpenConsole
-> is used by Windows Terminal to connect to and communicate with command-line
-> applications (via
-> [ConPty](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/)).
+## I tried running WindowsTerminal.exe and it crashes!
 
----
+* Don't try to run it unpackaged. Make sure to build & deploy `CascadiaPackage` from Visual Studio, and run the Windows Terminal (Dev Build) app.
+* Make sure you're on the right version of Windows. You'll need to be on Insider's builds, or wait for the 1903 release, as the Windows Terminal **REQUIRES** features from the latest Windows release.
 
-## Documentation
-
-All project documentation is located at [aka.ms/terminal-docs](https://aka.ms/terminal-docs). If you would like
-to contribute to the documentation, please submit a pull request on the [Windows
-Terminal Documentation repo](https://github.com/MicrosoftDocs/terminal).
-
----
-
-## Contributing
-
-We are excited to work alongside you, our amazing community, to build and
-enhance Windows Terminal\!
-
-***BEFORE you start work on a feature/fix***, please read & follow our
-[Contributor's
-Guide](https://github.com/microsoft/terminal/blob/main/CONTRIBUTING.md) to
-help avoid any wasted or duplicate effort.
-
-## Communicating with the Team
-
-The easiest way to communicate with the team is via GitHub issues.
-
-Please file new issues, feature requests and suggestions, but **DO search for
-similar open/closed pre-existing issues before creating a new issue.**
-
-If you would like to ask a question that you feel doesn't warrant an issue
-(yet), please reach out to us via Twitter:
-
-* Kayla Cinnamon, Program Manager:
-  [@cinnamon\_msft](https://twitter.com/cinnamon_msft)
-* Dustin Howett, Engineering Lead: [@dhowett](https://twitter.com/DHowett)
-* Michael Niksa, Senior Developer:
-  [@michaelniksa](https://twitter.com/MichaelNiksa)
-* Mike Griese, Developer: [@zadjii](https://twitter.com/zadjii)
-* Carlos Zamora, Developer: [@cazamor_msft](https://twitter.com/cazamor_msft)
-* Leon Liang, Developer: [@leonmsft](https://twitter.com/leonmsft)
-* Pankaj Bhojwani, Developer
-* Leonard Hecker, Developer: [@LeonardHecker](https://twitter.com/LeonardHecker)
-
-## Developer Guidance
+# Getting Started
 
 ## Prerequisites
 
-* You must be running Windows 1903 (build >= 10.0.18362.0) or later to run
-  Windows Terminal
-* You must [enable Developer Mode in the Windows Settings
-  app](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development)
-  to locally install and run Windows Terminal
-* You must have the [Windows 10 1903
-  SDK](https://developer.microsoft.com/en-us/windows/downloads/windows-10-sdk)
-  installed
-* You must have at least [VS
-  2019](https://visualstudio.microsoft.com/downloads/) installed
-* You must install the following Workloads via the VS Installer. Note: Opening
-  the solution in VS 2019 will [prompt you to install missing components
-  automatically](https://devblogs.microsoft.com/setup/configure-visual-studio-across-your-organization-with-vsconfig/):
-  * Desktop Development with C++
-  * Universal Windows Platform Development
-  * **The following Individual Components**
-    * C++ (v142) Universal Windows Platform Tools
+* You must be running Windows 1903 (build >= 10.0.18362.0) or above in order to run Windows Terminal
+* You must have the [1903 SDK](https://developer.microsoft.com/en-us/windows/downloads/windows-10-sdk) (build 10.0.18362.0) installed
+* You must have at least [VS 2017](https://visualstudio.microsoft.com/downloads/) installed.
+* You must install the following Workloads via the VS Installer. If you're running VS 2019, opening the solution will [prompt you to install missing components automatically](https://devblogs.microsoft.com/setup/configure-visual-studio-across-your-organization-with-vsconfig/).
+  - Desktop Development with C++
+  - Universal Windows Platform Development
+    - Also install the following Individual Component:
+      - C++ (v141) Universal Windows Platform Tools
+
+* You must also [enable Developer Mode in the Windows Settings app](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development) to locally install and run the Terminal app.
+
+## Debugging
+
+* To debug in VS, right click on CascadiaPackage (from VS Solution Explorer) and go to properties, in the Debug menu, change "Application process" and "Background task process" to "Native Only"
+
+## Contributing
+
+We are excited to work alongside you, our amazing community, to build and enhance Windows Terminal\!
+
+We ask that **before you start work on a feature that you would like to contribute, <span class="underline">please file an issue</span> describing your proposed change**: We will be happy to work with you to figure out the best approach, provide guidance and mentorship throughout feature development, and help avoid any wasted or duplicate effort.
+
+> 👉 **Remember\!** Your contributions may be incorporated into future versions of Windows\! Because of this, all pull requests will be subject to the same level of scrutiny for quality, coding standards, performance, globalization, accessibility, and compatibility as those of our internal contributors.
+
+> ⚠ **Note**: The Command-Line Team is actively working out of this repository and will be periodically re-structuring the code to make it easier to comprehend, navigate, build, test, and contribute to, so **DO expect significant changes to code layout on a regular basis**.
+
+## Documentation
+
+All documentation is located in the `./doc` folder. If you would like to contribute to the documentation, please submit a pull request.
+
+## Communicating with the Team
+
+The easiest way to communicate with the team is via GitHub issues. Please file new issues, feature requests and suggestions, but **DO search for similar open/closed pre-existing issues before you do**.
+
+Please help us keep this repository clean, inclusive, and fun\! We will not tolerate any abusive, rude, disrespectful or inappropriate behavior. Read our [Code of Conduct](https://opensource.microsoft.com/codeofconduct/) for more details.
+
+If you would like to ask a question that you feel doesn't warrant an issue (yet), please reach out to us via Twitter:
+
+  * Rich Turner, Program Manager: [@richturn\_ms](https://twitter.com/richturn_ms)
+
+  * Dustin Howett, Engineering Lead: [@dhowett](https://twitter.com/DHowett)
+  
+  * Michael Niksa, Senior Developer: [@michaelniksa](https://twitter.com/MichaelNiksa)
+
+  * Kayla Cinnamon, Program Manager (especially for UX issues): [@cinnamon\_msft](https://twitter.com/cinnamon_msft)
+
+# Developer Guidance
 
 ## Building the Code
 
-This repository uses [git
-submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its
-dependencies. To make sure submodules are restored or updated, be sure to run
-the following prior to building:
+This repository uses [git submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its dependencies. To make sure submodules are restored or updated, be sure to run the following prior to building:
 
 ```shell
 git submodule update --init --recursive
 ```
 
-OpenConsole.sln may be built from within Visual Studio or from the command-line
-using a set of convenience scripts & tools in the **/tools** directory:
+OpenConsole.sln may be built from within Visual Studio or from the command-line using MSBuild. To build from the command line, find your shell below.
 
-### Building in PowerShell
+### PowerShell
 
 ```powershell
 Import-Module .\tools\OpenConsole.psm1
@@ -324,53 +146,33 @@ Set-MsBuildDevEnvironment
 Invoke-OpenConsoleBuild
 ```
 
-### Building in Cmd
+### CMD
 
 ```shell
 .\tools\razzle.cmd
 bcz
 ```
 
-## Running & Debugging
+We've provided a set of convenience scripts as well as [README](./tools/README.md) in the **/tools** directory to help automate the process of building and running tests.
 
-To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the
-Solution Explorer) and go to properties. In the Debug menu, change "Application
-process" and "Background task process" to "Native Only".
+## Coding Guidance
 
-You should then be able to build & debug the Terminal project by hitting
-<kbd>F5</kbd>.
+Please review these brief docs below relating to our coding standards etc.
 
-> 👉 You will _not_ be able to launch the Terminal directly by running the
-> WindowsTerminal.exe. For more details on why, see
-> [#926](https://github.com/microsoft/terminal/issues/926),
-> [#4043](https://github.com/microsoft/terminal/issues/4043)
+> 👉 If you find something missing from these docs, feel free to contribute to any of our documentation files anywhere in the repository (or make some new ones\!)
 
-### Coding Guidance
+This is a work in progress as we learn what we'll need to provide people in order to be effective contributors to our project.
 
-Please review these brief docs below about our coding practices.
+  - [Coding Style](https://github.com/Microsoft/Terminal/blob/master/doc/STYLE.md)
+  - [Code Organization](https://github.com/Microsoft/Terminal/blob/master/doc/ORGANIZATION.md)
+  - [Exceptions in our legacy codebase](https://github.com/Microsoft/Terminal/blob/master/doc/EXCEPTIONS.md)
+  - [Helpful smart pointers and macros for interfacing with Windows in WIL](https://github.com/Microsoft/Terminal/blob/master/doc/WIL.md)
 
-> 👉 If you find something missing from these docs, feel free to contribute to
-> any of our documentation files anywhere in the repository (or write some new
-> ones!)
+# Code of Conduct
 
-This is a work in progress as we learn what we'll need to provide people in
-order to be effective contributors to our project.
-
-* [Coding Style](https://github.com/microsoft/terminal/blob/main/doc/STYLE.md)
-* [Code Organization](https://github.com/microsoft/terminal/blob/main/doc/ORGANIZATION.md)
-* [Exceptions in our legacy codebase](https://github.com/microsoft/terminal/blob/main/doc/EXCEPTIONS.md)
-* [Helpful smart pointers and macros for interfacing with Windows in WIL](https://github.com/microsoft/terminal/blob/main/doc/WIL.md)
-
----
-
-## Code of Conduct
-
-This project has adopted the [Microsoft Open Source Code of
-Conduct][conduct-code]. For more information see the [Code of Conduct
-FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any
-additional questions or comments.
+This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
+For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
 
 [conduct-code]: https://opensource.microsoft.com/codeofconduct/
 [conduct-FAQ]: https://opensource.microsoft.com/codeofconduct/faq/
 [conduct-email]: mailto:opencode@microsoft.com
-[store-install-link]: https://aka.ms/terminal

SECURITY.md

@@ -1,41 +0,0 @@
-<!-- BEGIN MICROSOFT SECURITY.MD V0.0.2 BLOCK -->
-
-## Security
-
-Microsoft takes the security of our software products and services seriously, which includes all source code repositories managed through our GitHub organizations, which include [Microsoft](https://github.com/Microsoft), [Azure](https://github.com/Azure), [DotNet](https://github.com/dotnet), [AspNet](https://github.com/aspnet), [Xamarin](https://github.com/xamarin), and [many more](https://opensource.microsoft.com/).
-
-If you believe you have found a security vulnerability in any Microsoft-owned repository that meets Microsoft's [definition](https://docs.microsoft.com/en-us/previous-versions/tn-archive/cc751383(v=technet.10)) of a security vulnerability, please report it to us as described below.
-
-## Reporting Security Issues
-
-**Please do not report security vulnerabilities through public GitHub issues.**
-
-Instead, please report them to the Microsoft Security Response Center (MSRC) at [https://msrc.microsoft.com/create-report](https://msrc.microsoft.com/create-report).
-
-If you prefer to submit without logging in, send email to [secure@microsoft.com](mailto:secure@microsoft.com).  If possible, encrypt your message with our PGP key; please download it from the [Microsoft Security Response Center PGP Key page](https://www.microsoft.com/en-us/msrc/pgp-key-msrc).
-
-You should receive a response within 24 hours. If for some reason you do not, please follow up via email to ensure we received your original message. Additional information can be found at [microsoft.com/msrc](https://www.microsoft.com/msrc). 
-
-Please include the requested information listed below (as much as you can provide) to help us better understand the nature and scope of the possible issue:
-
-  * Type of issue (e.g. buffer overflow, SQL injection, cross-site scripting, etc.)
-  * Full paths of source file(s) related to the manifestation of the issue
-  * The location of the affected source code (tag/branch/commit or direct URL)
-  * Any special configuration required to reproduce the issue
-  * Step-by-step instructions to reproduce the issue
-  * Proof-of-concept or exploit code (if possible)
-  * Impact of the issue, including how an attacker might exploit the issue
-
-This information will help us triage your report more quickly.
-
-If you are reporting for a bug bounty, more complete reports can contribute to a higher bounty award. Please visit our [Microsoft Bug Bounty Program](https://microsoft.com/msrc/bounty) page for more details about our active programs.
-
-## Preferred Languages
-
-We prefer all communications to be in English.
-
-## Policy
-
-Microsoft follows the principle of [Coordinated Vulnerability Disclosure](https://www.microsoft.com/en-us/msrc/cvd).
-
-<!-- END MICROSOFT SECURITY.MD BLOCK -->

SUPPORT.md

@@ -1,17 +0,0 @@
-# Support
-
-## How to file issues and get help  
-
-This project uses [GitHub issues][gh-issue] to [track bugs][gh-bug] and [feature requests][gh-feature]. Please search the existing issues before filing new issues to avoid duplicates. For new topics, file your bug or feature request as a new issue.
-
-For help and questions about using this project, please look at the [docs site for Windows Terminal][docs] and our [Contributor's Guide][contributor] if you want to work on Windows Terminal.
-
-## Microsoft Support Policy  
-
-Support for Windows Terminal is limited to the resources listed above.
-
-[gh-issue]: https://github.com/microsoft/terminal/issues/new/choose
-[gh-bug]: https://github.com/microsoft/terminal/issues/new?assignees=&labels=Issue-Bug&template=bug_report.md&title=
-[gh-feature]: https://github.com/microsoft/terminal/issues/new?assignees=&labels=Issue-Feature&template=Feature_Request.md&title=
-[docs]: https://docs.microsoft.com/windows/terminal
-[contributor]: https://github.com/microsoft/terminal/blob/main/CONTRIBUTING.md

XamlStyler.json

@@ -1,41 +0,0 @@
-{
-    "AttributesTolerance": 1,
-    "KeepFirstAttributeOnSameLine": true,
-    "MaxAttributeCharactersPerLine": 0,
-    "MaxAttributesPerLine": 1,
-    "NewlineExemptionElements": "RadialGradientBrush, GradientStop, LinearGradientBrush, ScaleTransform, SkewTransform, RotateTransform, TranslateTransform, Trigger, Condition, Setter",
-    "SeparateByGroups": false,
-    "AttributeIndentation": 0,
-    "AttributeIndentationStyle": 1,
-    "RemoveDesignTimeReferences":  false,
-    "EnableAttributeReordering": true,
-    "AttributeOrderingRuleGroups": [
-        "x:Class",
-        "xmlns, xmlns:x",
-        "xmlns:*",
-        "x:Key, Key, x:Name, Name, x:Uid, Uid, Title",
-        "Grid.Row, Grid.RowSpan, Grid.Column, Grid.ColumnSpan, Canvas.Left, Canvas.Top, Canvas.Right, Canvas.Bottom",
-        "Width, Height, MinWidth, MinHeight, MaxWidth, MaxHeight",
-        "Margin, Padding, HorizontalAlignment, VerticalAlignment, HorizontalContentAlignment, VerticalContentAlignment, Panel.ZIndex",
-        "*:*, *",
-        "PageSource, PageIndex, Offset, Color, TargetName, Property, Value, StartPoint, EndPoint",
-        "mc:Ignorable, d:IsDataSource, d:LayoutOverrides, d:IsStaticText",
-        "Storyboard.*, From, To, Duration"
-    ],
-    "FirstLineAttributes": "",
-    "OrderAttributesByName": true,
-    "PutEndingBracketOnNewLine": false,
-    "RemoveEndingTagOfEmptyElement": true,
-    "SpaceBeforeClosingSlash": true,
-    "RootElementLineBreakRule": 0,
-    "ReorderVSM": 2,
-    "ReorderGridChildren": false,
-    "ReorderCanvasChildren": false,
-    "ReorderSetters": 0,
-    "FormatMarkupExtension": true,
-    "NoNewLineMarkupExtensions": "x:Bind, Binding",
-    "ThicknessSeparator": 2,
-    "ThicknessAttributes": "Margin, Padding, BorderThickness, ThumbnailClipMargin",
-    "FormatOnSave": true,
-    "CommentPadding": 2,
-}

build/.nuget/packages.config

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="Taef.TestAdapter" version="10.30.180808002" />
+</packages>

build/Helix/AzurePipelinesHelperScripts.ps1

@@ -1,175 +0,0 @@
-function GetAzureDevOpsBaseUri
-{
-    Param(
-        [string]$CollectionUri,
-        [string]$TeamProject
-    )
-
-    return $CollectionUri + $TeamProject
-}
-
-function GetQueryTestRunsUri
-{
-    Param(
-        [string]$CollectionUri,
-        [string]$TeamProject,
-        [string]$BuildUri,
-        [switch]$IncludeRunDetails
-    )
-
-    if ($IncludeRunDetails)
-    {
-        $includeRunDetailsParameter = "&includeRunDetails=true"
-    }
-    else
-    {
-        $includeRunDetailsParameter = ""
-    }
-
-    $baseUri = GetAzureDevOpsBaseUri -CollectionUri $CollectionUri -TeamProject $TeamProject
-    $queryUri = "$baseUri/_apis/test/runs?buildUri=$BuildUri$includeRunDetailsParameter&api-version=5.0"
-    return $queryUri
-}
-
-function Get-HelixJobTypeFromTestRun
-{
-    Param ($testRun)
-
-    $testRunSingleResultUri = "$($testRun.url)/results?`$top=1&`$skip=0&api-version=5.1"
-    $singleTestResult = Invoke-RestMethod -Uri $testRunSingleResultUri -Method Get -Headers $azureDevOpsRestApiHeaders
-    $count = $singleTestResult.value.Length
-    if($count -eq 0)
-    {
-        # If the count is 0, then results have not yet been reported for this run.
-        # We only care about completed runs with results, so it is ok to just return 'UNKNOWN' for this run.
-        return "UNKNOWN"
-    }
-    else
-    {
-        $info = ConvertFrom-Json $singleTestResult.value.comment
-        $helixJobId = $info.HelixJobId
-        $job = Invoke-RestMethodWithRetries "https://helix.dot.net/api/2019-06-17/jobs/${helixJobId}?access_token=${HelixAccessToken}"
-        return $job.Type
-    }
-}
-
-function Append-HelixAccessTokenToUrl
-{
-    Param ([string]$url, [string]$token)
-    if($url.Contains("?"))
-    {
-        $url = "$($url)&access_token=$($token)"
-    }
-    else
-    {
-        $url = "$($url)?access_token=$($token)"
-    }
-    return $url
-}
-
-
-# The Helix Rest api is sometimes unreliable. So we call these apis with retry logic. 
-# Note: The Azure DevOps apis are stable and do not need to be called with this retry logic.
-$helixApiRetries = 0
-$helixApiRetriesMax = 10 
-
-function Download-StringWithRetries
-{
-    Param ([string]$fileName, [string]$url)
-
-    $result = ""
-    $done = $false
-
-    while(!($done))
-    {
-        try
-        {
-            Write-Host "Downloading $fileName"
-            $result = (New-Object System.Net.WebClient).DownloadString($url)
-            $done = $true
-        }
-        catch
-        {
-            Write-Host "Failed to download $fileName $($PSItem.Exception)"
-
-            $helixApiRetries = $helixApiRetries + 1
-            if($helixApiRetries -lt $helixApiRetriesMax)
-            {
-                Write-Host "Sleep and retry download of $fileName"
-                Start-Sleep 60
-            }
-            else
-            {
-                throw "Failed to download $fileName"
-            }
-        }
-    }
-
-    return $result
-}
-
-function Invoke-RestMethodWithRetries
-{
-    Param ([string]$url,$Headers)
-
-    $result = @()
-    $done = $false
-
-    while(!($done))
-    {
-        try
-        {
-            $result = Invoke-RestMethod -Uri $url -Method Get -Headers $Headers
-            $done = $true
-        }
-        catch
-        {
-            Write-Host "Failed to invoke Rest method $($PSItem.Exception)"
-
-            $helixApiRetries = $helixApiRetries + 1
-            if($helixApiRetries -lt $helixApiRetriesMax)
-            {
-                Write-Host "Sleep and retry invoke"
-                Start-Sleep 60
-            }
-            else
-            {
-                throw "Failed to invoke Rest method"
-            }
-        }
-    }
-
-    return $result
-}
-
-function Download-FileWithRetries
-{
-    Param ([string]$fileurl, [string]$destination)
-
-    $done = $false
-
-    while(!($done))
-    {
-        try
-        {
-            Write-Host "Downloading $destination"
-            $webClient.DownloadFile($fileurl, $destination)
-            $done = $true
-        }
-        catch
-        {
-            Write-Host "Failed to download $destination $($PSItem.Exception)"
-
-            $helixApiRetries = $helixApiRetries + 1
-            if($helixApiRetries -lt $helixApiRetriesMax)
-            {
-                Write-Host "Sleep and retry download of $destination"
-                Start-Sleep 60
-            }
-            else
-            {
-                throw "Failed to download $destination"
-            }
-        }
-    }
-}

build/Helix/ConvertWttLogToXUnit.ps1

@@ -1,28 +0,0 @@
-Param(
-    [Parameter(Mandatory = $true)] 
-    [string]$WttInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$WttSingleRerunInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$WttMultipleRerunInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$XUnitOutputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$TestNamePrefix
-)
-
-# Ideally these would be passed as parameters to the script. However ps makes it difficult to deal with string literals containing '&', so we just 
-# read the values directly from the environment variables
-$helixResultsContainerUri = $Env:HELIX_RESULTS_CONTAINER_URI
-$helixResultsContainerRsas = $Env:HELIX_RESULTS_CONTAINER_RSAS
-
-$rerunPassesRequiredToAvoidFailure = $env:rerunPassesRequiredToAvoidFailure
-
-Add-Type -Language CSharp -ReferencedAssemblies System.Xml,System.Xml.Linq,System.Runtime.Serialization,System.Runtime.Serialization.Json (Get-Content $PSScriptRoot\HelixTestHelpers.cs -Raw)
-
-$testResultParser = [HelixTestHelpers.TestResultParser]::new($TestNamePrefix, $helixResultsContainerUri, $helixResultsContainerRsas)
-$testResultParser.ConvertWttLogToXUnitLog($WttInputPath, $WttSingleRerunInputPath, $WttMultipleRerunInputPath, $XUnitOutputPath, $rerunPassesRequiredToAvoidFailure)

build/Helix/EnsureMachineState.ps1

@@ -1,112 +0,0 @@
-$scriptDirectory = $script:MyInvocation.MyCommand.Path | Split-Path -Parent
-
-# List all processes to aid debugging:
-Write-Host "All processes running:"
-Get-Process
-
-tasklist /svc
-
-# Add this test directory as an exclusion for Windows Defender
-Write-Host "Add $scriptDirectory as Exclusion Path"
-Add-MpPreference -ExclusionPath $scriptDirectory
-Write-Host "Add $($env:HELIX_CORRELATION_PAYLOAD) as Exclusion Path"
-Add-MpPreference -ExclusionPath $env:HELIX_CORRELATION_PAYLOAD
-Get-MpPreference
-Get-MpComputerStatus
-
-
-# Minimize all windows:
-$shell = New-Object -ComObject "Shell.Application"
-$shell.minimizeall()
-
-# Kill any instances of Windows Security Alert:
-$windowTitleToMatch = "*Windows Security Alert*"
-$procs = Get-Process | Where {$_.MainWindowTitle -like "*Windows Security Alert*"}
-foreach ($proc in $procs)
-{
-    Write-Host "Found process with '$windowTitleToMatch' title: $proc"
-    $proc.Kill();
-}
-
-# Kill processes by name that are known to interfere with our tests:
-$processNamesToStop = @("Microsoft.Photos", "WinStore.App", "SkypeApp", "SkypeBackgroundHost", "OneDriveSetup", "OneDrive")
-foreach($procName in $processNamesToStop)
-{
-    Write-Host "Attempting to kill $procName if it is running"
-    Stop-Process -ProcessName $procName -Verbose -ErrorAction Ignore   
-}
-Write-Host "All processes running after attempting to kill unwanted processes:"
-Get-Process
-
-tasklist /svc
-
-$platform = $env:testbuildplatform
-if(!$platform)
-{
-    $platform = "x86"
-}
-
-function UninstallApps {
-    Param([string[]]$appsToUninstall)
-
-    foreach($pkgName in $appsToUninstall)
-    {
-        foreach($pkg in (Get-AppxPackage $pkgName).PackageFullName) 
-        {
-            Write-Output "Removing: $pkg" 
-            Remove-AppxPackage $pkg
-        } 
-    }
-}
-
-function UninstallTestApps {
-    Param([string[]]$appsToUninstall)
-
-    foreach($pkgName in $appsToUninstall)
-    {
-        foreach($pkg in (Get-AppxPackage $pkgName).PackageFullName) 
-        {
-            Write-Output "Removing: $pkg" 
-            Remove-AppxPackage $pkg
-        }
-
-        # Sometimes an app can get into a state where it is no longer returned by Get-AppxPackage, but it is still present
-        # which prevents other versions of the app from being installed.
-        # To handle this, we can directly call Remove-AppxPackage against the full name of the package. However, without
-        # Get-AppxPackage to find the PackageFullName, we just have to manually construct the name.
-        $packageFullName = "$($pkgName)_1.0.0.0_$($platform)__8wekyb3d8bbwe" 
-        Write-Host "Removing $packageFullName if installed"
-        Remove-AppPackage $packageFullName -ErrorVariable appxerror -ErrorAction SilentlyContinue 
-        if($appxerror)
-        {
-            foreach($error in $appxerror)
-            {
-                # In most cases, Remove-AppPackage will fail due to the package not being found. Don't treat this as an error.
-                if(!($error.Exception.Message -match "0x80073CF1"))
-                {
-                    Write-Error $error
-                }
-            }
-        }
-        else
-        {
-            Write-Host "Successfully removed $packageFullName"
-        }
-    }
-}
-
-Write-Host "Uninstall AppX packages that are known to cause issues with our tests"
-UninstallApps("*Skype*", "*Windows.Photos*")
-
-Write-Host "Uninstall any of our test apps that may have been left over from previous test runs"
-UninstallTestApps("NugetPackageTestApp", "NugetPackageTestAppCX", "IXMPTestApp", "MUXControlsTestApp")
-
-Write-Host "Uninstall MUX Framework package that may have been left over from previous test runs"
-# We don't want to uninstall all versions of the MUX Framework package, as there may be other apps preinstalled on the system 
-# that depend on it. We only uninstall the Framework package that corresponds to the version of MUX that we are testing.
-[xml]$versionData = (Get-Content "version.props")
-$versionMajor = $versionData.GetElementsByTagName("MUXVersionMajor").'#text'
-$versionMinor = $versionData.GetElementsByTagName("MUXVersionMinor").'#text'
-UninstallApps("Microsoft.UI.Xaml.$versionMajor.$versionMinor")
-
-Get-Process

build/Helix/GenerateTestProjFile.ps1

@@ -1,336 +0,0 @@
-[CmdLetBinding()]
-Param(
-    [Parameter(Mandatory = $true)] 
-    [string]$TestFile,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$OutputProjFile,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$JobTestSuiteName,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$TaefPath,
-
-    [string]$TaefQuery
-)
-
-Class TestCollection
-{
-    [string]$Name
-    [string]$SetupMethodName
-    [string]$TeardownMethodName
-    [System.Collections.Generic.Dictionary[string, string]]$Properties
-
-    TestCollection()
-    {
-        if ($this.GetType() -eq [TestCollection])
-        {
-            throw "This class should never be instantiated directly; it should only be derived from."
-        }
-    }
-
-    TestCollection([string]$name)
-    {
-        $this.Init($name)
-    }
-
-    hidden Init([string]$name)
-    {
-        $this.Name = $name
-        $this.Properties = @{}
-    }
-}
-
-Class Test : TestCollection 
-{
-    Test([string]$name)
-    {
-        $this.Init($name)
-    }
-}
-
-Class TestClass : TestCollection
-{
-    [System.Collections.Generic.List[Test]]$Tests
-
-    TestClass([string]$name)
-    {
-        $this.Init($name)
-        $this.Tests = @{}
-    }
-}
-
-Class TestModule : TestCollection
-{
-    [System.Collections.Generic.List[TestClass]]$TestClasses
-
-    TestModule([string]$name)
-    {
-        $this.Init($name)
-        $this.TestClasses = @{}
-    }
-}
-
-function Parse-TestInfo([string]$taefOutput)
-{
-    enum LineType
-    {
-        None
-        TestModule
-        TestClass
-        Test
-        Setup
-        Teardown
-        Property
-    }
-        
-    [string]$testModuleIndentation = "        "
-    [string]$testClassIndentation = "            "
-    [string]$testIndentation = "                "
-    [string]$setupBeginning = "Setup: "
-    [string]$teardownBeginning = "Teardown: "
-    [string]$propertyBeginning = "Property["
-
-    function Get-LineType([string]$line)
-    {
-        if ($line.Contains($setupBeginning))
-        {
-            return [LineType]::Setup;
-        }
-        elseif ($line.Contains($teardownBeginning))
-        {
-            return [LineType]::Teardown;
-        }
-        elseif ($line.Contains($propertyBeginning))
-        {
-            return [LineType]::Property;
-        }
-        elseif ($line.StartsWith($testModuleIndentation) -and -not $line.StartsWith("$testModuleIndentation "))
-        {
-            return [LineType]::TestModule;
-        }
-        elseif ($line.StartsWith($testClassIndentation) -and -not $line.StartsWith("$testClassIndentation "))
-        {
-            return [LineType]::TestClass;
-        }
-        elseif ($line.StartsWith($testIndentation) -and -not $line.StartsWith("$testIndentation "))
-        {
-            return [LineType]::Test;
-        }
-        else
-        {
-            return [LineType]::None;
-        }
-    }
-
-    [string[]]$lines = $taefOutput.Split(@([Environment]::NewLine, "`n"), [StringSplitOptions]::RemoveEmptyEntries)
-    [System.Collections.Generic.List[TestModule]]$testModules = @()
-
-    [TestModule]$currentTestModule = $null
-    [TestClass]$currentTestClass = $null
-    [Test]$currentTest = $null
-
-    [TestCollection]$lastTestCollection = $null
-
-    foreach ($rawLine in $lines)
-    {
-        [LineType]$lineType = (Get-LineType $rawLine)
-
-        # We don't need the whitespace around the line anymore, so we'll discard it to make things easier.
-        [string]$line = $rawLine.Trim()
-
-        if ($lineType -eq [LineType]::TestModule)
-        {
-            if ($currentTest -ne $null -and $currentTestClass -ne $null)
-            {
-                $currentTestClass.Tests.Add($currentTest)
-            }
-
-            if ($currentTestClass -ne $null -and $currentTestModule -ne $null)
-            {
-                $currentTestModule.TestClasses.Add($currentTestClass)
-            }
-
-            if ($currentTestModule -ne $null)
-            {
-                $testModules.Add($currentTestModule)
-            }
-
-            $currentTestModule = [TestModule]::new($line)
-            $currentTestClass = $null
-            $currentTest = $null
-            $lastTestCollection = $currentTestModule
-        }
-        elseif ($lineType -eq [LineType]::TestClass)
-        {
-            if ($currentTest -ne $null -and $currentTestClass -ne $null)
-            {
-                $currentTestClass.Tests.Add($currentTest)
-            }
-
-            if ($currentTestClass -ne $null -and $currentTestModule -ne $null)
-            {
-                $currentTestModule.TestClasses.Add($currentTestClass)
-            }
-
-            $currentTestClass = [TestClass]::new($line)
-            $currentTest = $null
-            $lastTestCollection = $currentTestClass
-        }
-        elseif ($lineType -eq [LineType]::Test)
-        {
-            if ($currentTest -ne $null -and $currentTestClass -ne $null)
-            {
-                $currentTestClass.Tests.Add($currentTest)
-            }
-
-            $currentTest = [Test]::new($line)
-            $lastTestCollection = $currentTest
-        }
-        elseif ($lineType -eq [LineType]::Setup)
-        {
-            if ($lastTestCollection -ne $null)
-            {
-                $lastTestCollection.SetupMethodName = $line.Replace($setupBeginning, "")
-            }
-        }
-        elseif ($lineType -eq [LineType]::Teardown)
-        {
-            if ($lastTestCollection -ne $null)
-            {
-                $lastTestCollection.TeardownMethodName = $line.Replace($teardownBeginning, "")
-            }
-        }
-        elseif ($lineType -eq [LineType]::Property)
-        {
-            if ($lastTestCollection -ne $null)
-            {
-                foreach ($match in [Regex]::Matches($line, "Property\[(.*)\]\s+=\s+(.*)"))
-                {
-                    [string]$propertyKey = $match.Groups[1].Value;
-                    [string]$propertyValue = $match.Groups[2].Value;
-                    $lastTestCollection.Properties.Add($propertyKey, $propertyValue);
-                }
-            }
-        }
-    }
-
-    if ($currentTest -ne $null -and $currentTestClass -ne $null)
-    {
-        $currentTestClass.Tests.Add($currentTest)
-    }
-
-    if ($currentTestClass -ne $null -and $currentTestModule -ne $null)
-    {
-        $currentTestModule.TestClasses.Add($currentTestClass)
-    }
-
-    if ($currentTestModule -ne $null)
-    {
-        $testModules.Add($currentTestModule)
-    }
-
-    return $testModules
-}
-
-Write-Verbose "TaefQuery = $TaefQuery"
-
-$TaefSelectQuery = ""
-$TaefQueryToAppend = ""
-if($TaefQuery)
-{
-    $TaefSelectQuery = "/select:`"$TaefQuery`""
-    $TaefQueryToAppend = " and $TaefQuery"
-}
-Write-Verbose "TaefSelectQuery = $TaefSelectQuery"
-
-
-$taefExe = "$TaefPath\te.exe"
-[string]$taefOutput = & "$taefExe" /listproperties $TaefSelectQuery $TestFile | Out-String
-
-[System.Collections.Generic.List[TestModule]]$testModules = (Parse-TestInfo $taefOutput)
-
-$projFileContent = @"
-<Project>
-  <ItemGroup>
-"@
-
-foreach ($testModule in $testModules)
-{
-    foreach ($testClass in $testModules.TestClasses)
-    {
-        Write-Host "Generating Helix work item for test class $($testClass.Name)..."
-        [System.Collections.Generic.List[string]]$testSuiteNames = @()
-        
-        $testSuiteExists = $false
-        $suitelessTestExists = $false
-
-        foreach ($test in $testClass.Tests)
-        {
-            # A test method inherits its 'TestSuite' property from its TestClass
-            if (!$test.Properties.ContainsKey("TestSuite") -and $testClass.Properties.ContainsKey("TestSuite"))
-            {
-                $test.Properties["TestSuite"] = $testClass.Properties["TestSuite"]
-            }
-
-            if ($test.Properties.ContainsKey("TestSuite"))
-            {
-                [string]$testSuite = $test.Properties["TestSuite"]
-
-                if (-not $testSuiteNames.Contains($testSuite))
-                {
-                    Write-Host "    Found test suite $testSuite. Generating Helix work item for it as well."
-                    $testSuiteNames.Add($testSuite)
-                }
-
-                $testSuiteExists = $true
-            }
-            else
-            {
-                $suitelessTestExists = $true
-            }
-        }
-        
-        $testClassSelectPattern = "$($testClass.Name).*"
-        if($testClass.Name.Contains("::"))
-        {
-            $testClassSelectPattern = "$($testClass.Name)::*"
-        }
-        $testNameQuery= "(@Name='$testClassSelectPattern')"
-
-        $workItemName = $testClass.Name
-        # Native tests use '::' as a separator, which is not valid for workItem names.
-        $workItemName = $workItemName -replace "::", "-"
-        
-        if ($suitelessTestExists)
-        {
-            $projFileContent += @"
-
-    <HelixWorkItem Include="$($workItemName)" Condition="'`$(TestSuite)'=='$($JobTestSuiteName)'">
-      <Timeout>00:30:00</Timeout>
-      <Command>call %HELIX_CORRELATION_PAYLOAD%\runtests.cmd /select:"(@Name='$($testClass.Name)*'$(if ($testSuiteExists) { "and not @TestSuite='*'" }))$($TaefQueryToAppend)"</Command>
-    </HelixWorkItem>
-"@
-        }
-        
-        foreach ($testSuiteName in $testSuiteNames)
-        {
-            $projFileContent += @"
-
-    <HelixWorkItem Include="$($workItemName)-$testSuiteName" Condition="'`$(TestSuite)'=='$($JobTestSuiteName)'">
-      <Timeout>00:30:00</Timeout>
-      <Command>call %HELIX_CORRELATION_PAYLOAD%\runtests.cmd /select:"(@Name='$($testClass.Name)*' and @TestSuite='$testSuiteName')$($TaefQueryToAppend)"</Command>
-    </HelixWorkItem>
-"@
-        }
-    }
-}
-
-$projFileContent += @"
-
-  </ItemGroup>
-</Project>
-"@
-
-Set-Content $OutputProjFile $projFileContent -NoNewline -Encoding UTF8

build/Helix/HelixTestHelpers.cs

@@ -1,669 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.IO;
-using System.Linq;
-using System.Runtime.Serialization;
-using System.Runtime.Serialization.Json;
-using System.Text;
-using System.Xml.Linq;
-
-namespace HelixTestHelpers
-{
-    public class TestResult
-    {
-        public TestResult()
-        {
-            Screenshots = new List<string>();
-            RerunResults = new List<TestResult>();
-        }
-
-        public string Name { get; set; }
-        public string SourceWttFile { get; set; }
-        public bool Passed { get; set; }
-        public bool CleanupPassed { get; set; }
-        public TimeSpan ExecutionTime { get; set; }
-        public string Details { get; set; }
-
-        public List<string> Screenshots { get; private set; }
-        public List<TestResult> RerunResults { get; private set; }
-
-        // Returns true if the test pass rate is sufficient to avoid being counted as a failure.
-        public bool PassedOrUnreliable(int requiredNumberOfPasses)
-        {
-            if(Passed)
-            {
-                return true;
-            }
-            else
-            {
-                if(RerunResults.Count == 1)
-                {
-                    return RerunResults[0].Passed;
-                }
-                else
-                {
-                    return RerunResults.Where(r => r.Passed).Count() >= requiredNumberOfPasses;
-                }
-            }
-        }
-    }
-    
-    //
-    // Azure DevOps doesn't currently provide a way to directly report sub-results for tests that failed at least once
-    // that were run multiple times.  To get around that limitation, we'll mark the test as "Skip" since
-    // that's the only non-pass/fail result we can return, and will then report the information about the
-    // runs in the "reason" category for the skipped test.  In order to save space, we'll make the following
-    // optimizations for size:
-    //
-    //   1. Serialize as JSON, which is more compact than XML;
-    //   2. Don't serialize values that we don't need;
-    //   3. Store the URL prefix and suffix for the blob storage URL only once instead of
-    //      storing every log and screenshot URL in its entirety; and
-    //   4. Store a list of unique error messages and then index into that instead of
-    //      storing every error message in its entirety.
-    //
-    // #4 is motivated by the fact that if a test fails multiple times, it probably failed for the same reason
-    // each time, in which case we'd just be repeating ourselves if we stored every error message each time.
-    //
-    // TODO (https://github.com/dotnet/arcade/issues/2773): Once we're able to directly report things in a
-    // more granular fashion than just a binary pass/fail result, we should do that.
-    //
-    [DataContract]  
-    internal class JsonSerializableTestResults
-    {  
-        [DataMember]
-        internal string blobPrefix;
-        
-        [DataMember]
-        internal string blobSuffix;
-        
-        [DataMember]
-        internal string[] errors;
-        
-        [DataMember]
-        internal JsonSerializableTestResult[] results;
-    }
-    
-    [DataContract]  
-    internal class JsonSerializableTestResult  
-    {
-        [DataMember]
-        internal string outcome;
-
-        [DataMember]
-        internal int duration;
-        
-        [DataMember(EmitDefaultValue = false)]
-        internal string log;
-        
-        [DataMember(EmitDefaultValue = false)]
-        internal string[] screenshots;
-        
-        [DataMember(EmitDefaultValue = false)]
-        internal int errorIndex;
-    }
-    
-    public class TestPass
-    {
-        public TimeSpan TestPassExecutionTime { get; set; }
-        public List<TestResult> TestResults { get; set; }
-        
-        public static TestPass ParseTestWttFile(string fileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
-        {
-            using (var stream = File.OpenRead(fileName))
-            {
-                var doc = XDocument.Load(stream);
-                var testResults = new List<TestResult>();
-                var testExecutionTimeMap = new Dictionary<string, List<double>>();
-
-                TestResult currentResult = null;
-                long frequency = 0;
-                long startTime = 0;
-                long stopTime = 0;
-                bool inTestCleanup = false;
-
-                bool shouldLogToTestDetails = false;
-
-                long testPassStartTime = 0;
-                long testPassStopTime = 0;
-
-                Func<XElement, bool> isScopeData = (elt) =>
-                {
-                    return
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                        (
-                            elt.Element("Data").Element("WexContext").Value == "Cleanup" ||
-                            elt.Element("Data").Element("WexContext").Value == "TestScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "TestScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "ClassScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "ModuleScope"
-                        );
-                };
-
-                Func<XElement, bool> isModuleOrClassScopeStart = (elt) =>
-                {
-                    return
-                        elt.Name == "Msg" &&
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("StartGroup") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                            (elt.Element("Data").Element("WexContext").Value == "ClassScope" ||
-                            elt.Element("Data").Element("WexContext").Value == "ModuleScope");
-                };
-
-                Func<XElement, bool> isModuleScopeEnd = (elt) =>
-                {
-                    return
-                        elt.Name == "Msg" &&
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("EndGroup") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                        elt.Element("Data").Element("WexContext").Value == "ModuleScope";
-                };
-
-                Func<XElement, bool> isClassScopeEnd = (elt) =>
-                {
-                    return
-                        elt.Name == "Msg" &&
-                        elt.Element("Data") != null &&
-                        elt.Element("Data").Element("EndGroup") != null &&
-                        elt.Element("Data").Element("WexContext") != null &&
-                        elt.Element("Data").Element("WexContext").Value == "ClassScope";
-                };
-
-                int testsExecuting = 0;
-                foreach (XElement element in doc.Root.Elements())
-                {
-                    // Capturing the frequency data to record accurate
-                    // timing data.
-                    if (element.Name == "RTI")
-                    {
-                        frequency = Int64.Parse(element.Attribute("Frequency").Value);
-                    }
-
-                    // It's possible for a test to launch another test. If that happens, we won't modify the
-                    // current result. Instead, we'll continue operating like normal and expect that we get two
-                    // EndTests nodes before our next StartTests. We'll check that we've actually got a stop time
-                    // before creating a new result. This will result in the two results being squashed
-                    // into one result of the outer test that ran the inner one.
-                    if (element.Name == "StartTest")
-                    {
-                        testsExecuting++;
-                        if (testsExecuting == 1)
-                        {
-                            string testName = element.Attribute("Title").Value;
-                            
-                            if (truncateTestNames)
-                            {
-                                const string xamlNativePrefix = "Windows::UI::Xaml::Tests::";
-                                const string xamlManagedPrefix = "Windows.UI.Xaml.Tests.";
-                                if (testName.StartsWith(xamlNativePrefix))
-                                {
-                                    testName = testName.Substring(xamlNativePrefix.Length);
-                                }
-                                else if (testName.StartsWith(xamlManagedPrefix))
-                                {
-                                    testName = testName.Substring(xamlManagedPrefix.Length);
-                                }
-                            }
-
-                            currentResult = new TestResult() { Name = testName, SourceWttFile = fileName, Passed = true, CleanupPassed = true };
-                            testResults.Add(currentResult);
-                            startTime = Int64.Parse(element.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
-                            inTestCleanup = false;
-                            shouldLogToTestDetails = true;
-                            stopTime = 0;
-                        }
-                    }
-                    else if (currentResult != null && element.Name == "EndTest")
-                    {
-                        testsExecuting--;
-
-                        // If any inner test fails, we'll still fail the outer
-                        currentResult.Passed &= element.Attribute("Result").Value == "Pass";
-
-                        // Only gather execution data if this is the outer test we ran initially
-                        if (testsExecuting == 0)
-                        {
-                            stopTime = Int64.Parse(element.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
-                            if (!testExecutionTimeMap.Keys.Contains(currentResult.Name))
-                                testExecutionTimeMap[currentResult.Name] = new List<double>();
-                            testExecutionTimeMap[currentResult.Name].Add((double)(stopTime - startTime) / frequency);
-                            currentResult.ExecutionTime = TimeSpan.FromSeconds(testExecutionTimeMap[currentResult.Name].Average());
-
-                            startTime = 0;
-                            inTestCleanup = true;
-                        }
-                    }
-                    else if (currentResult != null &&
-                            (isModuleOrClassScopeStart(element) || isModuleScopeEnd(element) || isClassScopeEnd(element)))
-                    {
-                        shouldLogToTestDetails = false;
-                        inTestCleanup = false;
-                    }
-
-                    // Log-appending methods.
-                    if (currentResult != null && element.Name == "Error")
-                    {
-                        if (shouldLogToTestDetails)
-                        {
-                            currentResult.Details += "\r\n[Error]: " + element.Attribute("UserText").Value;
-                            if (element.Attribute("File") != null && element.Attribute("File").Value != "")
-                            {
-                                currentResult.Details += (" [File " + element.Attribute("File").Value);
-                                if (element.Attribute("Line") != null)
-                                    currentResult.Details += " Line: " + element.Attribute("Line").Value;
-                                currentResult.Details += "]";
-                            }
-                        }
-
-
-                        // The test cleanup errors will often come after the test claimed to have
-                        // 'passed'. We treat them as errors as well. 
-                        if (inTestCleanup)
-                        {
-                            currentResult.CleanupPassed = false;
-                            currentResult.Passed = false;
-                            // In stress mode runs, this test will run n times before cleanup is run. If the cleanup
-                            // fails, we want to fail every test.
-                            if (cleanupFailuresAreRegressions)
-                            {
-                                foreach (var result in testResults.Where(res => res.Name == currentResult.Name))
-                                {
-                                    result.Passed = false;
-                                    result.CleanupPassed = false;
-                                }
-                            }
-                        }
-                    }
-
-                    if (currentResult != null && element.Name == "Warn")
-                    {
-                        if (shouldLogToTestDetails)
-                        {
-                            currentResult.Details += "\r\n[Warn]: " + element.Attribute("UserText").Value;
-                        }
-
-                        if (element.Attribute("File") != null && element.Attribute("File").Value != "")
-                        {
-                            currentResult.Details += (" [File " + element.Attribute("File").Value);
-                            if (element.Attribute("Line") != null)
-                                currentResult.Details += " Line: " + element.Attribute("Line").Value;
-                            currentResult.Details += "]";
-                        }
-                    }
-
-                    if (currentResult != null && element.Name == "Msg")
-                    {
-                        var dataElement = element.Element("Data");
-                        if (dataElement != null)
-                        {
-                            var supportingInfo = dataElement.Element("SupportingInfo");
-                            if (supportingInfo != null)
-                            {
-                                var screenshots = supportingInfo.Elements("Item")
-                                    .Where(item => GetAttributeValue(item, "Name") == "Screenshot")
-                                    .Select(item => GetAttributeValue(item, "Value"));
-
-                                foreach(var screenshot in screenshots)
-                                {
-                                    string fileNameSuffix = string.Empty;
-                                    
-                                    if (fileName.Contains("_rerun_multiple"))
-                                    {
-                                        fileNameSuffix = "_rerun_multiple";
-                                    }
-                                    else if (fileName.Contains("_rerun"))
-                                    {
-                                        fileNameSuffix = "_rerun";
-                                    }
-                                    
-                                    currentResult.Screenshots.Add(screenshot.Replace(".jpg", fileNameSuffix + ".jpg"));
-                                }
-                            }
-                        }
-                    }
-                }
-
-                testPassStartTime = Int64.Parse(doc.Root.Descendants("WexTraceInfo").First().Attribute("TimeStamp").Value);
-                testPassStopTime = Int64.Parse(doc.Root.Descendants("WexTraceInfo").Last().Attribute("TimeStamp").Value);
-
-                var testPassTime = TimeSpan.FromSeconds((double)(testPassStopTime - testPassStartTime) / frequency);
-                
-                foreach (TestResult testResult in testResults)
-                {
-                    if (testResult.Details != null)
-                    {
-                        testResult.Details = testResult.Details.Trim();
-                    }
-                }
-
-                var testpass = new TestPass
-                {
-                    TestPassExecutionTime = testPassTime,
-                    TestResults = testResults
-                };
-
-                return testpass;
-            }
-        }
-        
-        public static TestPass ParseTestWttFileWithReruns(string fileName, string singleRerunFileName, string multipleRerunFileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
-        {
-            TestPass testPass = ParseTestWttFile(fileName, cleanupFailuresAreRegressions, truncateTestNames);
-            TestPass singleRerunTestPass = File.Exists(singleRerunFileName) ? ParseTestWttFile(singleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
-            TestPass multipleRerunTestPass = File.Exists(multipleRerunFileName) ? ParseTestWttFile(multipleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
-            
-            List<TestResult> rerunTestResults = new List<TestResult>();
-
-            if (singleRerunTestPass != null)
-            {
-                rerunTestResults.AddRange(singleRerunTestPass.TestResults);
-            }
-
-            if (multipleRerunTestPass != null)
-            {
-                rerunTestResults.AddRange(multipleRerunTestPass.TestResults);
-            }
-
-            // For each failed test result, we'll check to see whether the test passed at least once upon rerun.
-            // If so, we'll set PassedOnRerun to true to flag the fact that this is an unreliable test
-            // rather than a genuine test failure.
-            foreach (TestResult failedTestResult in testPass.TestResults.Where(r => !r.Passed))
-            {
-                failedTestResult.RerunResults.AddRange(rerunTestResults.Where(r => r.Name == failedTestResult.Name));
-            }
-
-            return testPass;
-        }
-
-        private static string GetAttributeValue(XElement element, string attributeName)
-        {
-            if(element.Attribute(attributeName) != null)
-            {
-                return element.Attribute(attributeName).Value;
-            }
-
-            return null;
-        }
-    }
-
-    public static class FailedTestDetector
-    {
-        public static void OutputFailedTestQuery(string wttInputPath)
-        {
-            var testPass = TestPass.ParseTestWttFile(wttInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            
-            List<string> failedTestNames = new List<string>();
-            
-            foreach (var result in testPass.TestResults)
-            {
-                if (!result.Passed)
-                {
-                    failedTestNames.Add(result.Name);
-                }
-            }
-            
-            if (failedTestNames.Count > 0)
-            {
-                string failedTestSelectQuery = "(@Name='";
-                
-                for (int i = 0; i < failedTestNames.Count; i++)
-                {
-                    failedTestSelectQuery += failedTestNames[i];
-                    
-                    if (i < failedTestNames.Count - 1)
-                    {
-                        failedTestSelectQuery += "' or @Name='";
-                    }
-                }
-                
-                failedTestSelectQuery += "')";
-            
-                Console.WriteLine(failedTestSelectQuery);
-            }
-            else
-            {
-                Console.WriteLine("");
-            }
-        }
-    }
-
-    public class TestResultParser
-    {
-        private string testNamePrefix;
-        private string helixResultsContainerUri;
-        private string helixResultsContainerRsas;
-    
-        public TestResultParser(string testNamePrefix, string helixResultsContainerUri, string helixResultsContainerRsas)
-        {
-            this.testNamePrefix = testNamePrefix;
-            this.helixResultsContainerUri = helixResultsContainerUri;
-            this.helixResultsContainerRsas = helixResultsContainerRsas;
-        }
-
-        public Dictionary<string, string> GetSubResultsJsonByMethodName(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath)
-        {
-            Dictionary<string, string> subResultsJsonByMethod = new Dictionary<string, string>();
-            TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            
-            foreach (var result in testPass.TestResults)
-            {
-                var methodName = result.Name.Substring(result.Name.LastIndexOf('.') + 1);
-
-                if (!result.Passed)
-                {
-                    // If a test failed, we'll have rerun it multiple times.  We'll record the results of each run
-                    // formatted as JSON.
-                    JsonSerializableTestResults serializableResults = new JsonSerializableTestResults();
-                    serializableResults.blobPrefix = helixResultsContainerUri;
-                    serializableResults.blobSuffix = helixResultsContainerRsas;
-
-                    List<string> errorList = new List<string>();
-                    errorList.Add(result.Details);
-
-                    foreach (TestResult rerunResult in result.RerunResults)
-                    {
-                        errorList.Add(rerunResult.Details);
-                    }
-
-                    serializableResults.errors = errorList.Distinct().Where(s => s != null).ToArray();
-
-                    var reason = new XElement("reason");
-                    List<JsonSerializableTestResult> serializableResultList = new List<JsonSerializableTestResult>();
-                    serializableResultList.Add(ConvertToSerializableResult(result, serializableResults.errors));
-
-                    foreach (TestResult rerunResult in result.RerunResults)
-                    {
-                        serializableResultList.Add(ConvertToSerializableResult(rerunResult, serializableResults.errors));
-                    }
-
-                    serializableResults.results = serializableResultList.ToArray();
-
-                    using (MemoryStream stream = new MemoryStream())
-                    {
-                        DataContractJsonSerializer serializer = new DataContractJsonSerializer(typeof(JsonSerializableTestResults));
-                        serializer.WriteObject(stream, serializableResults);
-                        stream.Position = 0;
-
-                        using (StreamReader streamReader = new StreamReader(stream))
-                        {
-                            subResultsJsonByMethod.Add(methodName, streamReader.ReadToEnd());
-                        }
-                    }
-                }
-            }
-
-            return subResultsJsonByMethod;
-        }
-
-        public void ConvertWttLogToXUnitLog(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath, string xunitOutputPath, int requiredPassRateThreshold)
-        {
-            TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            var results = testPass.TestResults;
-
-            int resultCount = results.Count;
-            int passedCount = results.Where(r => r.Passed).Count();
-            
-            // Since we re-run tests on failure, we'll mark every test that failed at least once as "skipped" rather than "failed".
-            // If the test failed sufficiently often enough for it to count as a failed test (determined by a property on the
-            // Azure DevOps job), we'll later mark it as failed during test results processing.
-
-            int failedCount = results.Where(r => !r.PassedOrUnreliable(requiredPassRateThreshold)).Count();
-            int skippedCount = results.Where(r => !r.Passed && r.PassedOrUnreliable(requiredPassRateThreshold)).Count();
-
-            var root = new XElement("assemblies");
-
-            var assembly = new XElement("assembly");
-            assembly.SetAttributeValue("name", "MUXControls.Test.dll");
-            assembly.SetAttributeValue("test-framework", "TAEF");
-            assembly.SetAttributeValue("run-date", DateTime.Now.ToString("yyyy-MM-dd"));
-
-            // This doesn't need to be completely accurate since it's not exposed anywhere.
-            // If we need accurate an start time we can probably calculate it from the te.wtl file, but for
-            // now this is fine.
-            assembly.SetAttributeValue("run-time", (DateTime.Now - testPass.TestPassExecutionTime).ToString("hh:mm:ss"));
-            
-            assembly.SetAttributeValue("total", resultCount);
-            assembly.SetAttributeValue("passed", passedCount);
-            assembly.SetAttributeValue("failed", failedCount);
-            assembly.SetAttributeValue("skipped", skippedCount);
-            
-            assembly.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
-            assembly.SetAttributeValue("errors", 0);
-            root.Add(assembly);
-
-            var collection = new XElement("collection");
-            collection.SetAttributeValue("total", resultCount);
-            collection.SetAttributeValue("passed", passedCount);
-            collection.SetAttributeValue("failed", failedCount);
-            collection.SetAttributeValue("skipped", skippedCount);
-            collection.SetAttributeValue("name", "Test collection");
-            collection.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
-            assembly.Add(collection);
-
-            foreach (var result in results)
-            {
-                var test = new XElement("test");
-                test.SetAttributeValue("name", testNamePrefix + "." + result.Name);
-
-                var className = GetTestClassName(result.Name);
-                var methodName = GetTestMethodName(result.Name);
-                test.SetAttributeValue("type", className);
-                test.SetAttributeValue("method", methodName);
-
-                test.SetAttributeValue("time", result.ExecutionTime.TotalSeconds);
-                
-                string resultString = string.Empty;
-                
-                if (result.Passed)
-                {
-                    resultString = "Pass";
-                }
-                else if(result.PassedOrUnreliable(requiredPassRateThreshold))
-                {
-                    resultString = "Skip";
-                }
-                else
-                {
-                    resultString = "Fail";
-                }
-
-                
-                test.SetAttributeValue("result", resultString);
-
-                if (!result.Passed)
-                {
-                    // If a test failed, we'll have rerun it multiple times.
-                    // We'll save the subresults to a JSON text file that we'll upload to the helix results container -
-                    // this allows it to be as long as we want, whereas the reason field in Azure DevOps has a 4000 character limit.
-                    string subResultsFileName = methodName + "_subresults.json";
-                    string subResultsFilePath = Path.Combine(Path.GetDirectoryName(wttInputPath), subResultsFileName);
-					
-                    if (result.PassedOrUnreliable(requiredPassRateThreshold))
-                    {
-                        var reason = new XElement("reason");
-                        reason.Add(new XCData(GetUploadedFileUrl(subResultsFileName, helixResultsContainerUri, helixResultsContainerRsas)));
-                        test.Add(reason);
-                    }
-                    else
-                    {
-                        var failure = new XElement("failure");
-                        var message = new XElement("message");
-						message.Add(new XCData(GetUploadedFileUrl(subResultsFileName, helixResultsContainerUri, helixResultsContainerRsas)));
-                        failure.Add(message);
-                        test.Add(failure);
-                    }
-                }
-                collection.Add(test);
-            }
-
-            File.WriteAllText(xunitOutputPath, root.ToString());
-        }
-        
-        private JsonSerializableTestResult ConvertToSerializableResult(TestResult rerunResult, string[] uniqueErrors)
-        {
-            var serializableResult = new JsonSerializableTestResult();
-            
-            serializableResult.outcome = rerunResult.Passed ? "Passed" : "Failed";
-            serializableResult.duration = (int)Math.Round(rerunResult.ExecutionTime.TotalMilliseconds);
-            
-            if (!rerunResult.Passed)
-            {
-                serializableResult.log = Path.GetFileName(rerunResult.SourceWttFile);
-                
-                if (rerunResult.Screenshots.Any())
-                {
-                    List<string> screenshots = new List<string>();
-                    
-                    foreach (var screenshot in rerunResult.Screenshots)
-                    {
-                        screenshots.Add(Path.GetFileName(screenshot));
-                    }
-                    
-                    serializableResult.screenshots = screenshots.ToArray();
-                }
-                
-                // To conserve space, we'll log the index of the error to index in a list of unique errors rather than
-                // jotting down every single error in its entirety. We'll add one to the result so we can avoid
-                // serializing this property when it has the default value of 0.
-                serializableResult.errorIndex = Array.IndexOf(uniqueErrors, rerunResult.Details) + 1;
-            }
-            
-            return serializableResult;
-        }
-
-        private string GetUploadedFileUrl(string filePath, string helixResultsContainerUri, string helixResultsContainerRsas)
-        {
-            var filename = Path.GetFileName(filePath);
-            return string.Format("{0}/{1}{2}", helixResultsContainerUri, filename, helixResultsContainerRsas);
-        }
-		
-		private string GetTestNameSeparator(string testname)
-        {
-            var separatorString = ".";
-            if (!testname.Contains(separatorString))
-            {
-                separatorString = "::";
-            }
-            return separatorString;
-        }
-
-        private string GetTestMethodName(string fullyQualifiedName)
-        {
-            var separatorString = GetTestNameSeparator(fullyQualifiedName);
-            var methodName = fullyQualifiedName.Substring(fullyQualifiedName.LastIndexOf(separatorString) + separatorString.Length);
-
-            return methodName;
-        }
-
-        private string GetTestClassName(string fullyQualifiedName)
-        {
-            var separatorString = GetTestNameSeparator(fullyQualifiedName);
-            var className = fullyQualifiedName.Substring(0, fullyQualifiedName.LastIndexOf(separatorString));
-
-            return className;
-        }
-    }
-}

build/Helix/InstallTestAppDependencies.ps1

@@ -1,12 +0,0 @@
-# Displaying progress is unnecessary and is just distracting.
-$ProgressPreference = "SilentlyContinue"
-
-$dependencyFiles = Get-ChildItem -Filter "*Microsoft.VCLibs.*.appx"
-
-foreach ($file in $dependencyFiles)
-{
-    Write-Host "Adding dependency $($file)..."
-
-    Add-AppxPackage $file
-    
-}

build/Helix/OutputFailedTestQuery.ps1

@@ -1,8 +0,0 @@
-Param(
-    [Parameter(Mandatory = $true)] 
-    [string]$WttInputPath
-)
-
-Add-Type -Language CSharp -ReferencedAssemblies System.Xml,System.Xml.Linq,System.Runtime.Serialization,System.Runtime.Serialization.Json (Get-Content $PSScriptRoot\HelixTestHelpers.cs -Raw)
-
-[HelixTestHelpers.FailedTestDetector]::OutputFailedTestQuery($WttInputPath)

build/Helix/OutputSubResultsJsonFiles.ps1

@@ -1,32 +0,0 @@
-Param(
-    [Parameter(Mandatory = $true)] 
-    [string]$WttInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$WttSingleRerunInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$WttMultipleRerunInputPath,
-
-    [Parameter(Mandatory = $true)] 
-    [string]$TestNamePrefix
-)
-
-# Ideally these would be passed as parameters to the script. However ps makes it difficult to deal with string literals containing '&', so we just 
-# read the values directly from the environment variables
-$helixResultsContainerUri = $Env:HELIX_RESULTS_CONTAINER_URI
-$helixResultsContainerRsas = $Env:HELIX_RESULTS_CONTAINER_RSAS
-
-Add-Type -Language CSharp -ReferencedAssemblies System.Xml,System.Xml.Linq,System.Runtime.Serialization,System.Runtime.Serialization.Json (Get-Content $PSScriptRoot\HelixTestHelpers.cs -Raw)
-
-$testResultParser = [HelixTestHelpers.TestResultParser]::new($TestNamePrefix, $helixResultsContainerUri, $helixResultsContainerRsas)
-[System.Collections.Generic.Dictionary[string, string]]$subResultsJsonByMethodName = $testResultParser.GetSubResultsJsonByMethodName($WttInputPath, $WttSingleRerunInputPath, $WttMultipleRerunInputPath)
-
-$subResultsJsonDirectory = [System.IO.Path]::GetDirectoryName($WttInputPath)
-
-foreach ($methodName in $subResultsJsonByMethodName.Keys)
-{
-    $subResultsJson = $subResultsJsonByMethodName[$methodName]
-    $subResultsJsonPath = [System.IO.Path]::Combine($subResultsJsonDirectory, $methodName + "_subresults.json")
-    Out-File $subResultsJsonPath -Encoding utf8 -InputObject $subResultsJson
-}

build/Helix/OutputTestResults.ps1

@@ -1,131 +0,0 @@
-Param(
-    [Parameter(Mandatory = $true)] 
-    [int]$MinimumExpectedTestsExecutedCount,
-
-    [string]$AccessToken = $env:SYSTEM_ACCESSTOKEN,
-    [string]$CollectionUri = $env:SYSTEM_COLLECTIONURI,
-    [string]$TeamProject = $env:SYSTEM_TEAMPROJECT,
-    [string]$BuildUri = $env:BUILD_BUILDURI,
-    [bool]$CheckJobAttempt
-)
-
-$azureDevOpsRestApiHeaders = @{
-    "Accept"="application/json"
-    "Authorization"="Basic $([System.Convert]::ToBase64String([System.Text.ASCIIEncoding]::ASCII.GetBytes(":$AccessToken")))"
-}
-
-. "$PSScriptRoot/AzurePipelinesHelperScripts.ps1"
-
-Write-Host "Checking test results..."
-
-$queryUri = GetQueryTestRunsUri -CollectionUri $CollectionUri -TeamProject $TeamProject -BuildUri $BuildUri -IncludeRunDetails
-Write-Host "queryUri = $queryUri"
-
-$testRuns = Invoke-RestMethod -Uri $queryUri -Method Get -Headers $azureDevOpsRestApiHeaders
-[System.Collections.Generic.List[string]]$failingTests = @()
-[System.Collections.Generic.List[string]]$unreliableTests = @()
-[System.Collections.Generic.List[string]]$unexpectedResultTest = @()
-
-[System.Collections.Generic.List[string]]$namesOfProcessedTestRuns = @()
-$totalTestsExecutedCount = 0
-
-# We assume that we only have one testRun with a given name that we care about
-# We only process the last testRun with a given name (based on completedDate)
-# The name of a testRun is set to the Helix queue that it was run on (e.g. windows.10.amd64.client19h1.xaml)
-# If we have multiple test runs on the same queue that we care about, we will need to re-visit this logic
-foreach ($testRun in ($testRuns.value | Sort-Object -Property "completedDate" -Descending))
-{
-    if ($CheckJobAttempt)
-    {
-        if ($namesOfProcessedTestRuns -contains $testRun.name)
-        {
-            Write-Host "Skipping test run '$($testRun.name)', since we have already processed a test run of that name."
-            continue
-        }
-    }
-    
-    Write-Host "Processing results from test run '$($testRun.name)'"
-    $namesOfProcessedTestRuns.Add($testRun.name)
-
-    $totalTestsExecutedCount += $testRun.totalTests
-
-    $testRunResultsUri = "$($testRun.url)/results?api-version=5.0"
-    $testResults = Invoke-RestMethod -Uri "$($testRun.url)/results?api-version=5.0" -Method Get -Headers $azureDevOpsRestApiHeaders
-        
-    foreach ($testResult in $testResults.value)
-    {
-        $shortTestCaseTitle = $testResult.testCaseTitle -replace "[a-zA-Z0-9]+.[a-zA-Z0-9]+.Windows.UI.Xaml.Tests.MUXControls.",""
-
-        if ($testResult.outcome -eq "Failed")
-        {
-            if (-not $failingTests.Contains($shortTestCaseTitle))
-            {
-                $failingTests.Add($shortTestCaseTitle)
-            }
-        }
-        elseif ($testResult.outcome -eq "Warning")
-        {
-            if (-not $unreliableTests.Contains($shortTestCaseTitle))
-            {
-                $unreliableTests.Add($shortTestCaseTitle)
-            }
-        }
-        elseif ($testResult.outcome -ne "Passed")
-        {
-            # We should only see tests with result "Passed", "Failed" or "Warning"
-            if (-not $unexpectedResultTest.Contains($shortTestCaseTitle))
-            {
-                $unexpectedResultTest.Add($shortTestCaseTitle)
-            }
-        }
-    }
-}
-
-if ($unreliableTests.Count -gt 0)
-{
-    Write-Host @"
-##vso[task.logissue type=warning;]Unreliable tests:
-##vso[task.logissue type=warning;]$($unreliableTests -join "$([Environment]::NewLine)##vso[task.logissue type=warning;]")
-
-"@
-}
-
-if ($failingTests.Count -gt 0)
-{
-    Write-Host @"
-##vso[task.logissue type=error;]Failing tests:
-##vso[task.logissue type=error;]$($failingTests -join "$([Environment]::NewLine)##vso[task.logissue type=error;]")
-
-"@
-}
-
-if ($unexpectedResultTest.Count -gt 0)
-{
-    Write-Host @"
-##vso[task.logissue type=error;]Tests with unexpected results:
-##vso[task.logissue type=error;]$($unexpectedResultTest -join "$([Environment]::NewLine)##vso[task.logissue type=error;]")
-
-"@
-}
-
-if($totalTestsExecutedCount -lt $MinimumExpectedTestsExecutedCount)
-{
-    Write-Host "Expected at least $MinimumExpectedTestsExecutedCount tests to be executed."
-    Write-Host "Actual executed test count is: $totalTestsExecutedCount"
-    Write-Host "##vso[task.complete result=Failed;]"
-}
-elseif ($failingTests.Count -gt 0)
-{
-    Write-Host "At least one test failed."
-    Write-Host "##vso[task.complete result=Failed;]"
-}
-elseif ($unreliableTests.Count -gt 0)
-{
-    Write-Host "All tests eventually passed, but some initially failed."
-    Write-Host "##vso[task.complete result=Succeeded;]"
-}
-else
-{
-    Write-Host "All tests passed."
-    Write-Host "##vso[task.complete result=Succeeded;]"
-}

build/Helix/PrepareHelixPayload.ps1

@@ -1,66 +0,0 @@
-[CmdLetBinding()]
-Param(
-    [string]$Platform,
-    [string]$Configuration,
-    [string]$ArtifactName='drop'
-)
-
-$payloadDir = "HelixPayload\$Configuration\$Platform"
-
-$repoDirectory = Join-Path (Split-Path -Parent $script:MyInvocation.MyCommand.Path) "..\..\"
-$nugetPackagesDir = Join-Path (Split-Path -Parent $script:MyInvocation.MyCommand.Path) "packages"
- 
-# Create the payload directory. Remove it if it already exists.
-If(test-path $payloadDir)
-{
-    Remove-Item $payloadDir -Recurse
-}
-New-Item -ItemType Directory -Force -Path $payloadDir
-
-# Copy files from nuget packages
-Copy-Item "$nugetPackagesDir\microsoft.windows.apps.test.1.0.181203002\lib\netcoreapp2.1\*.dll" $payloadDir
-Copy-Item "$nugetPackagesDir\Microsoft.Taef.10.58.210305002\build\Binaries\$Platform\*" $payloadDir
-Copy-Item "$nugetPackagesDir\Microsoft.Taef.10.58.210305002\build\Binaries\$Platform\NetFx4.5\*" $payloadDir
-New-Item -ItemType Directory -Force -Path "$payloadDir\.NETCoreApp2.1\"
-Copy-Item "$nugetPackagesDir\runtime.win-$Platform.microsoft.netcore.app.2.1.0\runtimes\win-$Platform\lib\netcoreapp2.1\*" "$payloadDir\.NETCoreApp2.1\"
-Copy-Item "$nugetPackagesDir\runtime.win-$Platform.microsoft.netcore.app.2.1.0\runtimes\win-$Platform\native\*" "$payloadDir\.NETCoreApp2.1\"
-New-Item -ItemType Directory -Force -Path "$payloadDir\content\"
-Copy-Item "$nugetPackagesDir\Microsoft.Internal.Windows.Terminal.TestContent.1.0.1\content\*" "$payloadDir\content\"
-
-function Copy-If-Exists
-{
-    Param($source, $destinationDir)
-
-    if (Test-Path $source)
-    {
-        Write-Host "Copy from '$source' to '$destinationDir'"
-        Copy-Item -Force $source $destinationDir
-    }
-    else
-    {
-        Write-Host "'$source' does not exist."
-    }
-}
-
-# Copy files from the 'drop' artifact dir
-Copy-Item "$repoDirectory\Artifacts\$ArtifactName\$Configuration\$Platform\Test\*" $payloadDir -Recurse
-
-# Copy files from the repo
-New-Item -ItemType Directory -Force -Path "$payloadDir"
-Copy-Item "build\helix\ConvertWttLogToXUnit.ps1" "$payloadDir"
-Copy-Item "build\helix\OutputFailedTestQuery.ps1" "$payloadDir"
-Copy-Item "build\helix\OutputSubResultsJsonFiles.ps1" "$payloadDir"
-Copy-Item "build\helix\HelixTestHelpers.cs" "$payloadDir"
-Copy-Item "build\helix\runtests.cmd" $payloadDir
-Copy-Item "build\helix\InstallTestAppDependencies.ps1" "$payloadDir"
-Copy-Item "build\Helix\EnsureMachineState.ps1" "$payloadDir"
-
-# Copy the APPX package from the 'drop' artifact dir
-Copy-Item "$repoDirectory\Artifacts\$ArtifactName\appx\CascadiaPackage_0.0.1.0_$Platform.msix" $payloadDir\CascadiaPackage.zip
-
-# Rename it to extension of ZIP because Expand-Archive is real sassy on the build machines
-# and refuses to unzip it because of its file extension while on a desktop, it just 
-# does the job without complaining.
-
-# Extract the APPX package
-Expand-Archive -LiteralPath $payloadDir\CascadiaPackage.zip -DestinationPath $payloadDir\appx

build/Helix/ProcessHelixFiles.ps1

@@ -1,110 +0,0 @@
-Param(
-    [string]$AccessToken = $env:SYSTEM_ACCESSTOKEN,
-    [string]$HelixAccessToken = $env:HelixAccessToken,
-    [string]$CollectionUri = $env:SYSTEM_COLLECTIONURI,
-    [string]$TeamProject = $env:SYSTEM_TEAMPROJECT,
-    [string]$BuildUri = $env:BUILD_BUILDURI,
-    [string]$OutputFolder = "HelixOutput"
-)
-
-$helixLinkFile = "$OutputFolder\LinksToHelixTestFiles.html"
-
-
-function Generate-File-Links
-{
-    Param ([Array[]]$files,[string]$sectionName)
-    if($files.Count -gt 0)
-    {
-        Out-File -FilePath $helixLinkFile -Append -InputObject "<div class=$sectionName>"
-        Out-File -FilePath $helixLinkFile -Append -InputObject "<h4>$sectionName</h4>"
-        Out-File -FilePath $helixLinkFile -Append -InputObject "<ul>"
-        foreach($file in $files)
-        {
-            Out-File -FilePath $helixLinkFile -Append -InputObject "<li><a href=$($file.Link)>$($file.Name)</a></li>"
-        }
-        Out-File -FilePath $helixLinkFile -Append -InputObject "</ul>"
-        Out-File -FilePath $helixLinkFile -Append -InputObject "</div>"
-    }
-}
-
-#Create output directory
-New-Item $OutputFolder -ItemType Directory
-
-$azureDevOpsRestApiHeaders = @{
-    "Accept"="application/json"
-    "Authorization"="Basic $([System.Convert]::ToBase64String([System.Text.ASCIIEncoding]::ASCII.GetBytes(":$AccessToken")))"
-}
-
-. "$PSScriptRoot/AzurePipelinesHelperScripts.ps1"
-
-$queryUri = GetQueryTestRunsUri -CollectionUri $CollectionUri -TeamProject $TeamProject -BuildUri $BuildUri -IncludeRunDetails
-Write-Host "queryUri = $queryUri"
-
-$testRuns = Invoke-RestMethodWithRetries $queryUri -Headers $azureDevOpsRestApiHeaders
-$webClient = New-Object System.Net.WebClient
-[System.Collections.Generic.List[string]]$workItems = @()
-
-foreach ($testRun in $testRuns.value)
-{
-    Write-Host "testRunUri = $testRun.url"
-    $testResults = Invoke-RestMethodWithRetries "$($testRun.url)/results?api-version=5.0" -Headers $azureDevOpsRestApiHeaders
-    $isTestRunNameShown = $false
-
-    foreach ($testResult in $testResults.value)
-    {
-        $info = ConvertFrom-Json $testResult.comment
-        $helixJobId = $info.HelixJobId
-        $helixWorkItemName = $info.HelixWorkItemName
-
-        $workItem = "$helixJobId-$helixWorkItemName"
-
-        Write-Host "Helix Work Item = $workItem"
-
-        if (-not $workItems.Contains($workItem))
-        {
-            $workItems.Add($workItem)
-            $filesQueryUri = "https://helix.dot.net/api/2019-06-17/jobs/$helixJobId/workitems/$helixWorkItemName/files$accessTokenParam"
-            $files = Invoke-RestMethodWithRetries $filesQueryUri
-
-            $screenShots = $files | where { $_.Name.EndsWith(".jpg") }
-            $dumps = $files | where { $_.Name.EndsWith(".dmp") }
-            $pgcFiles = $files | where { $_.Name.EndsWith(".pgc") }
-            if ($screenShots.Count + $dumps.Count + $pgcFiles.Count -gt 0)
-            {
-                if(-Not $isTestRunNameShown)
-                {
-                    Out-File -FilePath $helixLinkFile -Append -InputObject "<h2>$($testRun.name)</h2>"
-                    $isTestRunNameShown = $true
-                }
-                Out-File -FilePath $helixLinkFile -Append -InputObject "<h3>$helixWorkItemName</h3>"
-                Generate-File-Links $screenShots "Screenshots"
-                Generate-File-Links $dumps "CrashDumps"
-                Generate-File-Links $pgcFiles "PGC files"
-                $misc = $files | where { ($screenShots -NotContains $_) -And ($dumps -NotContains $_) -And ($visualTreeVerificationFiles -NotContains $_) -And ($pgcFiles -NotContains $_) }
-                Generate-File-Links $misc "Misc"
-
-                foreach($pgcFile in $pgcFiles)
-                {
-                    $flavorPath = $testResult.automatedTestName.Split('.')[0]
-                    $archPath = $testResult.automatedTestName.Split('.')[1]
-                    $fileName = $pgcFile.Name
-                    $fullPath = "$OutputFolder\PGO\$flavorPath\$archPath"
-                    $destination = "$fullPath\$fileName"
-
-                    Write-Host "Copying $($pgcFile.Name) to $destination"
-
-                    if (-Not (Test-Path $fullPath))
-                    {
-                        New-Item $fullPath -ItemType Directory
-                    }
-
-                    $link = $pgcFile.Link
-
-                    Write-Host "Downloading $link to $destination"
-
-                    Download-FileWithRetries $link $destination
-                }
-            }
-        }
-    }
-}

build/Helix/RunTestsInHelix.proj

@@ -1,20 +0,0 @@
-<Project Sdk="Microsoft.DotNet.Helix.Sdk" DefaultTargets="Test">
-  <PropertyGroup>
-    <HelixSource>pr/terminal/$(BUILD_SOURCEBRANCH)/</HelixSource>
-    <EnableXUnitReporter>true</EnableXUnitReporter>
-    <EnableAzurePipelinesReporter>true</EnableAzurePipelinesReporter>
-    <FailOnMissionControlTestFailure>true</FailOnMissionControlTestFailure>
-    <HelixPreCommands>$(HelixPreCommands);set testnameprefix=$(Configuration).$(Platform);set testbuildplatform=$(Platform);set rerunPassesRequiredToAvoidFailure=$(rerunPassesRequiredToAvoidFailure)</HelixPreCommands>
-    <OutputPath>..\..\bin\$(Platform)\$(Configuration)\</OutputPath>
-  </PropertyGroup>
-
-  <ItemGroup>
-    <HelixCorrelationPayload Include="..\..\HelixPayload\$(Configuration)\$(Platform)" />
-  </ItemGroup>
-  
-  <!-- These .proj files are generated by the build machine prior to running tests via GenerateTestProjFile.ps1. -->
-  <Import Project="$(ProjFilesPath)\$(Configuration)\$(Platform)\RunTestsInHelix-TerminalAppLocalTests.proj" Condition=" '$(TestSuite)'=='DevTestSuite' " />
-  <Import Project="$(ProjFilesPath)\$(Configuration)\$(Platform)\RunTestsInHelix-SettingsModelLocalTests.proj" Condition=" '$(TestSuite)'=='DevTestSuite' " />
-  <Import Project="$(ProjFilesPath)\$(Configuration)\$(Platform)\RunTestsInHelix-HostTestsUIA.proj" Condition=" '$(TestSuite)'=='DevTestSuite' " />
-  <Import Project="$(ProjFilesPath)\$(Configuration)\$(Platform)\RunTestsInHelix-WindowsTerminalUIATests.proj" Condition=" '$(TestSuite)'=='PgoInstrumentationSuite' " />
-</Project>

build/Helix/UpdateUnreliableTests.ps1

@@ -1,135 +0,0 @@
-[CmdLetBinding()]
-Param(
-    [Parameter(Mandatory = $true)] 
-    [int]$RerunPassesRequiredToAvoidFailure,
-
-    [string]$AccessToken = $env:SYSTEM_ACCESSTOKEN,
-    [string]$CollectionUri = $env:SYSTEM_COLLECTIONURI,
-    [string]$TeamProject = $env:SYSTEM_TEAMPROJECT,
-    [string]$BuildUri = $env:BUILD_BUILDURI
-)
-
-. "$PSScriptRoot/AzurePipelinesHelperScripts.ps1"
-
-
-$azureDevOpsRestApiHeaders = @{
-    "Accept"="application/json"
-    "Authorization"="Basic $([System.Convert]::ToBase64String([System.Text.ASCIIEncoding]::ASCII.GetBytes(":$AccessToken")))"
-}
-
-$queryUri = GetQueryTestRunsUri -CollectionUri $CollectionUri -TeamProject $TeamProject -BuildUri $BuildUri
-Write-Host "queryUri = $queryUri"
-
-# To account for unreliable tests, we'll iterate through all of the tests associated with this build, check to see any tests that were unreliable
-# (denoted by being marked as "skipped"), and if so, we'll instead mark those tests with a warning and enumerate all of the attempted runs
-# with their pass/fail states as well as any relevant error messages for failed attempts.
-$testRuns = Invoke-RestMethod -Uri $queryUri -Method Get -Headers $azureDevOpsRestApiHeaders
-
-$timesSeenByRunName = @{}
-      
-foreach ($testRun in $testRuns.value)
-{
-    $testRunResultsUri = "$($testRun.url)/results?api-version=5.0"
-        
-    Write-Host "Marking test run `"$($testRun.name)`" as in progress so we can change its results to account for unreliable tests."
-    Invoke-RestMethod -Uri "$($testRun.url)?api-version=5.0" -Method Patch -Body (ConvertTo-Json @{ "state" = "InProgress" }) -Headers $azureDevOpsRestApiHeaders -ContentType "application/json" | Out-Null
-
-    Write-Host "Retrieving test results..."
-    $testResults = Invoke-RestMethod -Uri $testRunResultsUri -Method Get -Headers $azureDevOpsRestApiHeaders
-        
-    foreach ($testResult in $testResults.value)
-    {
-        $testNeedsSubResultProcessing = $false
-        if ($testResult.outcome -eq "NotExecuted")
-        {
-            $testNeedsSubResultProcessing = $true
-        }
-        elseif($testResult.outcome -eq "Failed")
-        {
-            $testNeedsSubResultProcessing = $testResult.errorMessage -like "*_subresults.json*"
-        }
-
-        if ($testNeedsSubResultProcessing)
-        {
-            Write-Host "  Test $($testResult.testCaseTitle) was detected as unreliable. Updating..."
-            
-            # The errorMessage field contains a link to the JSON-encoded rerun result data.
-            $rerunResults = ConvertFrom-Json (New-Object System.Net.WebClient).DownloadString($testResult.errorMessage)
-            [System.Collections.Generic.List[System.Collections.Hashtable]]$rerunDataList = @()
-            $attemptCount = 0
-            $passCount = 0
-            $totalDuration = 0
-            
-            foreach ($rerun in $rerunResults.results)
-            {
-                $rerunData = @{
-                    "displayName" = "Attempt #$($attemptCount + 1) - $($testResult.testCaseTitle)";
-                    "durationInMs" = $rerun.duration;
-                    "outcome" = $rerun.outcome;
-                }
-
-                if ($rerun.outcome -eq "Passed")
-                {
-                    $passCount++
-                }
-                
-                if ($attemptCount -gt 0)
-                {
-                    $rerunData["sequenceId"] = $attemptCount
-                }
-
-                Write-Host "    Attempt #$($attemptCount + 1): $($rerun.outcome)"
-                
-                if ($rerun.outcome -ne "Passed")
-                {
-                    $screenshots = "$($rerunResults.blobPrefix)/$($rerun.screenshots -join @"
-$($rerunResults.blobSuffix)
-$($rerunResults.blobPrefix)
-"@)$($rerunResults.blobSuffix)"
-
-                    # We subtract 1 from the error index because we added 1 so we could use 0
-                    # as a default value not injected into the JSON in order to keep its size down.
-                    # We did this because there's a maximum size enforced for the errorMessage parameter
-                    # in the Azure DevOps REST API.
-                    $fullErrorMessage = @"
-Log: $($rerunResults.blobPrefix)/$($rerun.log)$($rerunResults.blobSuffix)
-
-Screenshots:
-$screenshots
-
-Error log:
-$($rerunResults.errors[$rerun.errorIndex - 1])
-"@
-
-                    $rerunData["errorMessage"] = $fullErrorMessage
-                }
-                
-                $attemptCount++
-                $totalDuration += $rerun.duration
-                $rerunDataList.Add($rerunData)
-            }
-
-            $overallOutcome = "Warning"
-            
-            if ($attemptCount -eq 2)
-            {
-                Write-Host "  Test $($testResult.testCaseTitle) passed on the immediate rerun, so we'll mark it as unreliable."
-            }
-            elseif ($passCount -gt $RerunPassesRequiredToAvoidFailure)
-            {
-                Write-Host "  Test $($testResult.testCaseTitle) passed on $passCount of $attemptCount attempts, which is greater than or equal to the $RerunPassesRequiredToAvoidFailure passes required to avoid being marked as failed. Marking as unreliable."
-            }
-            else
-            {
-                Write-Host "  Test $($testResult.testCaseTitle) passed on only $passCount of $attemptCount attempts, which is less than the $RerunPassesRequiredToAvoidFailure passes required to avoid being marked as failed. Marking as failed."
-                $overallOutcome = "Failed"
-            }
-            
-            $updateBody = ConvertTo-Json @(@{ "id" = $testResult.id; "outcome" = $overallOutcome; "errorMessage" = " "; "durationInMs" = $totalDuration; "subResults" = $rerunDataList; "resultGroupType" = "rerun" }) -Depth 5
-            Invoke-RestMethod -Uri $testRunResultsUri -Method Patch -Headers $azureDevOpsRestApiHeaders -Body $updateBody -ContentType "application/json" | Out-Null
-        }
-    }
-        
-    Write-Host "Finished updates. Re-marking test run `"$($testRun.name)`" as completed."
-    Invoke-RestMethod -Uri "$($testRun.url)?api-version=5.0" -Method Patch -Body (ConvertTo-Json @{ "state" = "Completed" }) -Headers $azureDevOpsRestApiHeaders -ContentType "application/json" | Out-Null
-}

build/Helix/global.json

@@ -1,5 +0,0 @@
-{
-  "msbuild-sdks": {
-    "Microsoft.DotNet.Helix.Sdk": "5.0.0-beta.20277.5"
-  }
-}

build/Helix/packages.config

@@ -1,9 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<packages>
-  <package id="MUXCustomBuildTasks" version="1.0.48" targetFramework="native" />
-  <package id="Microsoft.Internal.Windows.Terminal.TestContent" version="1.0.1" />
-  <package id="Microsoft.Taef" version="10.58.210305002" targetFramework="native" />
-  <package id="microsoft.windows.apps.test" version="1.0.181203002" targetFramework="native" />
-  <package id="runtime.win-x86.microsoft.netcore.app" version="2.1.0" targetFramework="native" />
-  <package id="runtime.win-x64.microsoft.netcore.app" version="2.1.0" targetFramework="native" />
-</packages>

build/Helix/readme.md

@@ -1,32 +0,0 @@
-This directory contains code and configuration files to run WinUI tests in Helix.
-
-Helix is a cloud hosted test execution environment which is accessed via the Arcade SDK.
-More details:
-* [Arcade](https://github.com/dotnet/arcade)
-* [Helix](https://github.com/dotnet/arcade/tree/master/src/Microsoft.DotNet.Helix/Sdk)
-
-WinUI tests are scheduled in Helix by the Azure DevOps Pipeline: [RunHelixTests.yml](../RunHelixTests.yml).
-
-The workflow is as follows:
-1. NuGet Restore is called on the packages.config in this directory. This downloads any runtime dependencies 
-that are needed to run tests.
-2. PrepareHelixPayload.ps1 is called. This copies the necessary files from various locations into a Helix 
-payload directory. This directory is what will get sent to the Helix machines.
-3. RunTestsInHelix.proj is executed. This proj has a dependency on 
-[Microsoft.DotNet.Helix.Sdk](https://github.com/dotnet/arcade/tree/master/src/Microsoft.DotNet.Helix/Sdk) 
-which it uses to publish the Helix payload directory and to schedule the Helix Work Items. The WinUI tests 
-are parallelized into multiple Helix Work Items.
-4. Each Helix Work Item calls [runtests.cmd](runtests.cmd) with a specific query to pass to 
-[TAEF](https://docs.microsoft.com/en-us/windows-hardware/drivers/taef/) which runs the tests.
-5. If a test is detected to have failed, we run it again, first once, then eight more times if it fails again.
-If it fails all ten times, we report the test as failed; otherwise, we report it as unreliable,
-which will show up as a warning, but which will not fail the build.  When a test is reported as unreliable,
-we include the results for each individual run via a JSON string in the original test's errorMessage field.
-6. TAEF produces logs in WTT format. Helix is able to process logs in XUnit format. We run 
-[ConvertWttLogToXUnit.ps1](ConvertWttLogToXUnit.ps1) to convert the logs into the necessary format.
-7. RunTestsInHelix.proj has EnableAzurePipelinesReporter set to true. This allows the XUnit formatted test 
-results to be reported back to the Azure DevOps Pipeline.
-8. We process unreliable tests once all tests have been reported by reading the JSON string from the
-errorMessage field and calling the Azure DevOps REST API to modify the unreliable tests to have sub-results
-added to the test and to mark the test as "warning", which will enable people to see exactly how the test
-failed in runs where it did.

build/Helix/runtests.cmd

@@ -1,105 +0,0 @@
-setlocal ENABLEDELAYEDEXPANSION
-
-echo %TIME%
-
-robocopy %HELIX_CORRELATION_PAYLOAD% . /s /NP > NUL
-
-echo %TIME%
-
-reg add HKLM\Software\Policies\Microsoft\Windows\Appx /v AllowAllTrustedApps /t REG_DWORD /d 1 /f
-
-rem enable dump collection for our test apps:
-rem note, this script is run from a 32-bit cmd, but we need to set the native reg-key
-FOR %%A IN (TestHostApp.exe,te.exe,te.processhost.exe,conhost.exe,OpenConsole.exe,WindowsTerminal.exe) DO (
-  %systemroot%\sysnative\cmd.exe /c reg add "HKLM\Software\Microsoft\Windows\Windows Error Reporting\LocalDumps\%%A" /v DumpFolder /t REG_EXPAND_SZ /d %HELIX_DUMP_FOLDER% /f
-  %systemroot%\sysnative\cmd.exe /c reg add "HKLM\Software\Microsoft\Windows\Windows Error Reporting\LocalDumps\%%A" /v DumpType /t REG_DWORD /d 2 /f
-  %systemroot%\sysnative\cmd.exe /c reg add "HKLM\Software\Microsoft\Windows\Windows Error Reporting\LocalDumps\%%A" /v DumpCount /t REG_DWORD /d 10 /f
-)
-
-echo %TIME%
-
-:: kill dhandler, which is a tool designed to handle unexpected windows appearing. But since our tests are
-:: expected to show UI we don't want it running.
-taskkill -f -im dhandler.exe
-
-echo %TIME%
-powershell -ExecutionPolicy Bypass .\EnsureMachineState.ps1
-echo %TIME%
-powershell -ExecutionPolicy Bypass .\InstallTestAppDependencies.ps1
-echo %TIME%
-
-set testBinaryCandidates=TerminalApp.LocalTests.dll SettingsModel.LocalTests.dll Conhost.UIA.Tests.dll WindowsTerminal.UIA.Tests.dll
-set testBinaries=
-for %%B in (%testBinaryCandidates%) do (
-    if exist %%B (
-        set "testBinaries=!testBinaries! %%B"
-    )
-)
-
-echo %TIME%
-te.exe %testBinaries% /enablewttlogging /unicodeOutput:false /sessionTimeout:0:15 /testtimeout:0:10 /screenCaptureOnError %*
-echo %TIME%
-
-powershell -ExecutionPolicy Bypass Get-Process
-
-move te.wtl te_original.wtl
-
-copy /y te_original.wtl %HELIX_WORKITEM_UPLOAD_ROOT%
-copy /y WexLogFileOutput\*.jpg %HELIX_WORKITEM_UPLOAD_ROOT%
-copy /y *.pgc %HELIX_WORKITEM_UPLOAD_ROOT%
-
-set FailedTestQuery=
-for /F "tokens=* usebackq" %%I IN (`powershell -ExecutionPolicy Bypass .\OutputFailedTestQuery.ps1 te_original.wtl`) DO (
-  set FailedTestQuery=%%I
-)
-
-rem The first time, we'll just re-run failed tests once.  In many cases, tests fail very rarely, such that
-rem a single re-run will be sufficient to detect many unreliable tests.
-if "%FailedTestQuery%" == "" goto :SkipReruns
-
-echo %TIME%
-te.exe %testBinaries% /enablewttlogging /unicodeOutput:false /sessionTimeout:0:15 /testtimeout:0:10 /screenCaptureOnError /select:"%FailedTestQuery%"
-echo %TIME%
-
-move te.wtl te_rerun.wtl
-
-copy /y te_rerun.wtl %HELIX_WORKITEM_UPLOAD_ROOT%
-copy /y WexLogFileOutput\*.jpg %HELIX_WORKITEM_UPLOAD_ROOT%
-
-rem If there are still failing tests remaining, we'll run them eight more times, so they'll have been run a total of ten times.
-rem If any tests fail all ten times, we can be pretty confident that these are actual test failures rather than unreliable tests.
-if not exist te_rerun.wtl goto :SkipReruns
-
-set FailedTestQuery=
-for /F "tokens=* usebackq" %%I IN (`powershell -ExecutionPolicy Bypass .\OutputFailedTestQuery.ps1 te_rerun.wtl`) DO (
-  set FailedTestQuery=%%I
-)
-
-if "%FailedTestQuery%" == "" goto :SkipReruns
-
-echo %TIME%
-te.exe %testBinaries% /enablewttlogging /unicodeOutput:false /sessionTimeout:0:15 /testtimeout:0:10 /screenCaptureOnError /testmode:Loop /LoopTest:8 /select:"%FailedTestQuery%"
-echo %TIME%
-
-powershell -ExecutionPolicy Bypass Get-Process
-
-move te.wtl te_rerun_multiple.wtl
-
-copy /y te_rerun_multiple.wtl %HELIX_WORKITEM_UPLOAD_ROOT%
-copy /y WexLogFileOutput\*.jpg %HELIX_WORKITEM_UPLOAD_ROOT%
-powershell -ExecutionPolicy Bypass .\CopyVisualTreeVerificationFiles.ps1
-
-:SkipReruns
-
-powershell -ExecutionPolicy Bypass Get-Process
-
-echo %TIME%
-powershell -ExecutionPolicy Bypass .\OutputSubResultsJsonFiles.ps1 te_original.wtl te_rerun.wtl te_rerun_multiple.wtl %testnameprefix%
-powershell -ExecutionPolicy Bypass .\ConvertWttLogToXUnit.ps1 te_original.wtl te_rerun.wtl te_rerun_multiple.wtl testResults.xml %testnameprefix%
-echo %TIME%
-
-copy /y *_subresults.json %HELIX_WORKITEM_UPLOAD_ROOT%
-
-type testResults.xml
-
-echo %TIME%

build/config/LocConfig.xml

@@ -1,15 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Modules>
-  <Module name="Microsoft.WindowsTerminal" tdbuildteamid="7105">
-    <File location="TerminalApp"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalApp\Resources\en-US\Resources.resw" />
-    <File location="TerminalControl"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalControl\Resources\en-US\Resources.resw" />
-    <File location="TerminalConnection"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalConnection\Resources\en-US\Resources.resw" />
-    <File location="WindowsTerminalUniversal"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\WindowsTerminalUniversal\Resources\en-US\Resources.resw" />
-    <File location="CascadiaPackage"
-      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\CascadiaPackage\Resources\en-US\Resources.resw" />
-  </Module>
-</Modules>

build/config/NuGet.config

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<configuration>
+    <packageSources>
+        <add key="TAEF Internal" value="https://microsoft.pkgs.visualstudio.com/_packaging/Taef/nuget/v3/index.json" />
+    </packageSources>
+    <config>
+        <add key="repositorypath" value="..\..\packages" />
+    </config>
+</configuration>

build/config/SignConfig.WindowsTerminal.xml

@@ -0,0 +1,5 @@
+<SignConfigXML>
+  <job platform="" configuration="" certSubject="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" jobname="EngFunSimpleSign" approvers="">
+   <file src="__INPATHROOT__\Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle" signType="136020001" dest="__OUTPATHROOT__\Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle" /> 
+  </job>
+</SignConfigXML>

build/packages.config

@@ -1,5 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<packages>
-  <package id="MUXCustomBuildTasks" version="1.0.48" targetFramework="native" />
-  <package id="Microsoft.Taef" version="10.58.210305002" targetFramework="native" />
-</packages>

build/pipelines/ci.yml

@@ -2,8 +2,7 @@ trigger:
   batch: true
   branches:
     include:
-      - main
-      - feature/*
+      - master
   paths:
     exclude:
       - doc/*
@@ -13,58 +12,25 @@ trigger:
 pr:
   branches:
     include:
-      - main
-      - feature/*
-  paths:
-    exclude:
-      - doc/*
-      - samples/*
-      - tools/*
-
-variables:
-  - name: runCodesignValidationInjectionBG
-    value: false
+      - master
 
 #     0.0.yyMM.dd##
 #     0.0.1904.0900
 name: 0.0.$(Date:yyMM).$(Date:dd)$(Rev:rr)
 
-stages:
-  - stage: Audit_x64
-    displayName: Audit Mode
-    dependsOn: []
-    condition: succeeded()
-    jobs:
-      - template: ./templates/build-console-audit-job.yml
-        parameters:
-          platform: x64
-  - stage: Build_x64
-    displayName: Build x64
-    dependsOn: []
-    condition: succeeded()
-    jobs:
-      - template: ./templates/build-console-ci.yml
-        parameters:
-          platform: x64
-  - stage: Build_x86
-    displayName: Build x86
-    dependsOn: []
-    jobs:
-      - template: ./templates/build-console-ci.yml
-        parameters:
-          platform: x86
-  - stage: Build_ARM64
-    displayName: Build ARM64
-    dependsOn: []
-    condition: not(eq(variables['Build.Reason'], 'PullRequest'))
-    jobs:
-      - template: ./templates/build-console-ci.yml
-        parameters:
-          platform: ARM64
-  - stage: Scripts
-    displayName: Code Health Scripts
-    dependsOn: []
-    condition: succeeded()
-    jobs:
-      - template: ./templates/check-formatting.yml
+jobs:
+  - template: ./templates/build-console-audit-job.yml
+    parameters:
+      platform: x64
 
+  - template: ./templates/build-console-ci.yml
+    parameters:
+      platform: x64
+
+  - template: ./templates/build-console-ci.yml
+    parameters:
+      platform: x86
+
+  - template: ./templates/build-console-ci.yml
+    parameters:
+      platform: ARM64

build/pipelines/pgo.yml

@@ -1,27 +0,0 @@
-trigger: none
-pr: none
-
-variables:
-  - name: runCodesignValidationInjectionBG
-    value: false
-
-#     0.0.yyMM.dd##
-#     0.0.1904.0900
-name: 0.0.$(Date:yyMM).$(Date:dd)$(Rev:rr)
-
-stages:
-  - stage: Build_x64
-    displayName: Build x64
-    dependsOn: []
-    condition: succeeded()
-    jobs:
-      - template: ./templates/build-console-pgo.yml
-        parameters:
-          platform: x64
-  - stage: Publish_PGO_Databases
-    displayName: Publish PGO databases
-    dependsOn: ['Build_x64']
-    jobs:
-      - template: ./templates/pgo-build-and-publish-nuget-job.yml
-        parameters:
-          pgoArtifact: 'PGO'

build/pipelines/release.yml

@@ -15,14 +15,6 @@ variables:
 # store publication machinery happy.
 name: 'Terminal_$(date:yyMM).$(date:dd)$(rev:rrr)'
 
-# Build Arguments:
-#   WindowsTerminalOfficialBuild=[true,false]
-#     true - this is running on our build agent
-#     false - running locally
-#   WindowsTerminalBranding=[Dev,Preview,Release]
-#     <none>  - Development build resources (default)
-#     Preview - Preview build resources
-#     Release - regular build resources
 jobs:
   - template: ./templates/build-console-audit-job.yml
     parameters:
@@ -31,18 +23,16 @@ jobs:
   - template: ./templates/build-console-int.yml
     parameters:
       platform: x64
-      additionalBuildArguments: /p:WindowsTerminalOfficialBuild=true;WindowsTerminalBranding=Preview
+      additionalBuildArguments: /p:WindowsTerminalReleaseBuild=true
 
   - template: ./templates/build-console-int.yml
     parameters:
       platform: x86
-      additionalBuildArguments: /p:WindowsTerminalOfficialBuild=true;WindowsTerminalBranding=Preview
+      additionalBuildArguments: /p:WindowsTerminalReleaseBuild=true
 
   - template: ./templates/build-console-int.yml
     parameters:
       platform: arm64
-      additionalBuildArguments: /p:WindowsTerminalOfficialBuild=true;WindowsTerminalBranding=Preview
-
-  - template: ./templates/check-formatting.yml
+      additionalBuildArguments: /p:WindowsTerminalReleaseBuild=true
 
   - template: ./templates/release-sign-and-bundle.yml

build/pipelines/templates/build-console-audit-job.yml

@@ -8,9 +8,7 @@ jobs:
   variables:
     BuildConfiguration: AuditMode
     BuildPlatform: ${{ parameters.platform }}
-  pool: "windevbuildagents"
-  # The public pool is also an option!
-  # pool: { vmImage: windows-2019 }
+  pool: { vmImage: vs2017-win2016 }
 
   steps:
   - checkout: self
@@ -33,11 +31,21 @@ jobs:
       restoreSolution: OpenConsole.sln
       restoreDirectory: '$(Build.SourcesDirectory)\packages'
 
+  - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
+    displayName: 'NuGet restore packages for CI'
+    inputs:
+      command: restore
+      restoreSolution: build/.nuget/packages.config
+      feedsToUse: config
+      externalFeedCredentials: 'TAEF NuGet Feed'
+      nugetConfigPath: build/config/NuGet.config
+      restoreDirectory: '$(Build.SourcesDirectory)/packages'
+
   - task: VSBuild@1
     displayName: 'Build solution **\OpenConsole.sln'
     inputs:
       solution: '**\OpenConsole.sln'
-      vsVersion: 16.0
+      vsVersion: 15.0
       platform: '$(BuildPlatform)'
       configuration: '$(BuildConfiguration)'
       msbuildArgs: ${{ parameters.additionalBuildArguments }}

build/pipelines/templates/build-console-ci.yml

@@ -2,8 +2,6 @@ parameters:
   configuration: 'Release'
   platform: ''
   additionalBuildArguments: ''
-  minimumExpectedTestsExecutedCount: 10  # Sanity check for minimum expected tests to be reported
-  rerunPassesRequiredToAvoidFailure: 5
 
 jobs:
 - job: Build${{ parameters.platform }}${{ parameters.configuration }}
@@ -11,33 +9,9 @@ jobs:
   variables:
     BuildConfiguration: ${{ parameters.configuration }}
     BuildPlatform: ${{ parameters.platform }}
-  pool: "windevbuildagents"
-  # The public pool is also an option!
-  # pool: { vmImage: windows-2019 }
+  pool: { vmImage: vs2017-win2016 }
 
   steps:
   - template: build-console-steps.yml
     parameters:
       additionalBuildArguments: ${{ parameters.additionalBuildArguments }}
-
-  # It appears that the Component Governance build task that gets automatically injected stopped working
-  # when we renamed our main branch.
-  - task: ms.vss-governance-buildtask.governance-build-task-component-detection.ComponentGovernanceComponentDetection@0
-    displayName: 'Component Detection'
-    condition: and(succeededOrFailed(), not(eq(variables['Build.Reason'], 'PullRequest')))
-
-- template: helix-runtests-job.yml
-  parameters:
-    name: 'RunTestsInHelix'
-    dependsOn: Build${{ parameters.platform }}${{ parameters.configuration }}
-    condition: and(succeeded(), and(eq('${{ parameters.platform }}', 'x64'), not(eq(variables['Build.Reason'], 'PullRequest')))) 
-    testSuite: 'DevTestSuite'
-    rerunPassesRequiredToAvoidFailure: ${{ parameters.rerunPassesRequiredToAvoidFailure }}
-    
-- template: helix-processtestresults-job.yml
-  parameters:
-    dependsOn:
-    - RunTestsInHelix
-    condition: and(succeededOrFailed(), and(eq('${{ parameters.platform }}', 'x64'), not(eq(variables['Build.Reason'], 'PullRequest')))) 
-    rerunPassesRequiredToAvoidFailure: ${{ parameters.rerunPassesRequiredToAvoidFailure }}
-    minimumExpectedTestsExecutedCount: ${{ parameters.minimumExpectedTestsExecutedCount }}

build/pipelines/templates/build-console-int.yml

@@ -9,7 +9,6 @@ jobs:
   variables:
     BuildConfiguration: ${{ parameters.configuration }}
     BuildPlatform: ${{ parameters.platform }}
-    PGOBuildMode: 'Optimize'
 
   pool:
     name: Package ES Lab E

build/pipelines/templates/build-console-pgo.yml

@@ -1,51 +0,0 @@
-parameters:
-  configuration: 'Release'
-  platform: ''
-  additionalBuildArguments: ''
-  minimumExpectedTestsExecutedCount: 1  # Sanity check for minimum expected tests to be reported
-  rerunPassesRequiredToAvoidFailure: 0
-
-jobs:
-- job: Build${{ parameters.platform }}${{ parameters.configuration }}
-  displayName: Build ${{ parameters.platform }} ${{ parameters.configuration }}
-  variables:
-    BuildConfiguration: ${{ parameters.configuration }}
-    BuildPlatform: ${{ parameters.platform }}
-    PGOBuildMode: 'Instrument'
-  pool: "windevbuildagents"
-  # The public pool is also an option!
-  # pool: { vmImage: windows-2019 }
-
-  steps:
-  - template: build-console-steps.yml
-    parameters:
-      additionalBuildArguments: ${{ parameters.additionalBuildArguments }}
-
-- template: helix-runtests-job.yml
-  parameters:
-    name: 'RunTestsInHelix'
-    dependsOn: Build${{ parameters.platform }}${{ parameters.configuration }}
-    condition: succeeded()
-    testSuite: 'PgoInstrumentationSuite'
-    taefQuery: '@IsPgo=true'
-    configuration: ${{ parameters.configuration }}
-    platform: ${{ parameters.platform }}
-    rerunPassesRequiredToAvoidFailure: ${{ parameters.rerunPassesRequiredToAvoidFailure }}
-    
-- template: helix-processtestresults-job.yml
-  parameters:
-    name: 'ProcessTestResults'
-    pgoArtifact: 'PGO'
-    dependsOn:
-    - RunTestsInHelix
-    condition: succeededOrFailed()
-    rerunPassesRequiredToAvoidFailure: ${{ parameters.rerunPassesRequiredToAvoidFailure }}
-    minimumExpectedTestsExecutedCount: ${{ parameters.minimumExpectedTestsExecutedCount }}
-
-- template: pgo-merge-pgd-job.yml
-  parameters:
-    name: 'MergePGD'
-    dependsOn:
-    - ProcessTestResults
-    pgoArtifact: 'PGO'
-    platform: ${{ parameters.platform }}

build/pipelines/templates/build-console-steps.yml

@@ -1,6 +1,5 @@
 parameters:
   additionalBuildArguments: ''
-  testLogPath: '$(Build.BinariesDirectory)\$(BuildPlatform)\$(BuildConfiguration)\testsOnBuildMachine.wtl'
 
 steps:
 - checkout: self
@@ -8,14 +7,17 @@ steps:
   clean: true
 
 - task: NuGetToolInstaller@0
-  displayName: 'Use NuGet 5.2.0'
+  displayName: Ensure NuGet 4.8.1
   inputs:
-    versionSpec: 5.2.0
+    versionSpec: 4.8.1
+
+- task: VisualStudioTestPlatformInstaller@1
+  displayName: Ensure VSTest Platform
 
 # In the Microsoft Azure DevOps tenant, NuGetCommand is ambiguous.
 # This should be `task: NuGetCommand@2`
 - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-  displayName: Restore NuGet packages for solution
+  displayName: Restore NuGet packages
   inputs:
     command: restore
     feedsToUse: config
@@ -24,137 +26,53 @@ steps:
     restoreDirectory: '$(Build.SourcesDirectory)\packages'
 
 - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-  displayName: Restore NuGet packages for extraneous build actions
+  displayName: 'NuGet restore packages for CI'
   inputs:
     command: restore
+    restoreSolution: build/.nuget/packages.config
     feedsToUse: config
-    configPath: NuGet.config
-    restoreSolution: build/packages.config
-    restoreDirectory: '$(Build.SourcesDirectory)\packages'
-
-# The environment variable VCToolsInstallDir isn't defined on lab machines, so we need to retrieve it ourselves.
-- script: |
-    "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -Latest -requires Microsoft.Component.MSBuild -property InstallationPath > %TEMP%\vsinstalldir.txt
-    set /p _VSINSTALLDIR15=<%TEMP%\vsinstalldir.txt
-    del %TEMP%\vsinstalldir.txt
-    call "%_VSINSTALLDIR15%\Common7\Tools\VsDevCmd.bat"
-    echo VCToolsInstallDir = %VCToolsInstallDir%
-    echo ##vso[task.setvariable variable=VCToolsInstallDir]%VCToolsInstallDir%
-  displayName: 'Retrieve VC tools directory'
-
-- task: CmdLine@1
-  displayName: 'Display build machine environment variables'
-  inputs:
-    filename: 'set'
-
-- task: powershell@2
-  displayName: 'Restore PGO database'
-  condition: eq(variables['PGOBuildMode'], 'Optimize')
-  inputs:
-    targetType: filePath
-    workingDirectory: $(Build.SourcesDirectory)\tools\PGODatabase
-    filePath: $(Build.SourcesDirectory)\tools\PGODatabase\restore-pgodb.ps1
+    externalFeedCredentials: 'TAEF NuGet Feed'
+    nugetConfigPath: build/config/NuGet.config
+    restoreDirectory: '$(Build.SourcesDirectory)/packages'
 
 - task: VSBuild@1
   displayName: 'Build solution **\OpenConsole.sln'
   inputs:
     solution: '**\OpenConsole.sln'
-    vsVersion: 16.0
+    vsVersion: 15.0
     platform: '$(BuildPlatform)'
     configuration: '$(BuildConfiguration)'
-    msbuildArgs: "${{ parameters.additionalBuildArguments }}"
+    msbuildArgs: ${{ parameters.additionalBuildArguments }}
     clean: true
     maximumCpuCount: true
 
-- task: PowerShell@2
-  displayName: 'Check MSIX for common regressions'
-  # PGO runtime needs its own CRT and it's in the package for convenience.
-  # That will make this script mad so skip since we're not shipping the PGO Instrumentation one anyway.
-  condition: ne(variables['PGOBuildMode'], 'Instrument')
-  inputs:
-    targetType: inline
-    script: |
-      $Package = Get-ChildItem -Recurse -Filter "CascadiaPackage_*.msix"
-      .\build\scripts\Test-WindowsTerminalPackage.ps1 -Verbose -Path $Package.FullName
-
-- task: powershell@2
-  displayName: 'Source Index PDBs'
-  condition: ne(variables['PGOBuildMode'], 'Instrument')
-  inputs:
-    targetType: filePath
-    filePath: build\scripts\Index-Pdbs.ps1
-    arguments: -SearchDir '$(Build.SourcesDirectory)' -SourceRoot '$(Build.SourcesDirectory)' -recursive -Verbose -CommitId $(Build.SourceVersion)
-    errorActionPreference: silentlyContinue
-
-- task: PowerShell@2
-  displayName: 'Rationalize build platform'
-  inputs:
-    targetType: inline
-    script: |
-      $Arch = "$(BuildPlatform)"
-      If ($Arch -Eq "x86") { $Arch = "Win32" }
-      Write-Host "##vso[task.setvariable variable=RationalizedBuildPlatform]${Arch}"
-
-- task: PowerShell@2
-  displayName: 'Validate binaries are optimized'
-  condition: eq(variables['pgoBuildMode'], 'Optimize')
-  inputs:
-    targetType: inline
-    script: |
-      $Binaries = 'OpenConsole.exe', 'WindowsTerminal.exe', 'TerminalApp.dll', 'TerminalConnection.dll', 'Microsoft.Terminal.Control.dll', 'Microsoft.Terminal.Remoting.dll', 'Microsoft.Terminal.Settings.Editor.dll', 'Microsoft.Terminal.Settings.Model.dll'
-      foreach ($BinFile in $Binaries)
-      {
-        & "$(Build.SourcesDirectory)\tools\PGODatabase\verify-pgo.ps1" "$(Build.SourcesDirectory)/bin/$(RationalizedBuildPlatform)/$(BuildConfiguration)/$BinFile"
-      }
-
-- task: PowerShell@2
+- task: VSTest@2
   displayName: 'Run Unit Tests'
   inputs:
-    targetType: filePath
-    filePath: build\scripts\Run-Tests.ps1
-    arguments: -MatchPattern '*unit.test*.dll' -Platform '$(RationalizedBuildPlatform)' -Configuration '$(BuildConfiguration)' -LogPath '${{ parameters.testLogPath }}'
-  condition: and(and(succeeded(), ne(variables['PGOBuildMode'], 'Instrument')), or(eq(variables['BuildPlatform'], 'x64'), eq(variables['BuildPlatform'], 'x86')))
+    testAssemblyVer2: |
+      $(BUILD.SOURCESDIRECTORY)\**\*unit.test*.dll
+      !**\obj\**
+    runSettingsFile: '$(BUILD.SOURCESDIRECTORY)\src\unit.tests.$(BuildPlatform).runsettings'
+    codeCoverageEnabled: true
+    runInParallel: False
+    testRunTitle: 'Console Unit Tests'
+    platform: '$(BuildPlatform)'
+    configuration: '$(BuildConfiguration)'
+  condition: and(succeeded(), or(eq(variables['BuildPlatform'], 'x64'), eq(variables['BuildPlatform'], 'x86')))
 
-- task: PowerShell@2
+- task: VSTest@2
   displayName: 'Run Feature Tests (x64 only)'
   inputs:
-    targetType: filePath
-    filePath: build\scripts\Run-Tests.ps1
-    arguments: -MatchPattern '*feature.test*.dll' -Platform '$(RationalizedBuildPlatform)' -Configuration '$(BuildConfiguration)' -LogPath '${{ parameters.testLogPath }}'
-  condition: and(and(succeeded(), ne(variables['PGOBuildMode'], 'Instrument')), eq(variables['BuildPlatform'], 'x64'))
-
-- task: PowerShell@2
-  displayName: 'Convert Test Logs from WTL to xUnit format'
-  inputs:
-    targetType: filePath
-    filePath: build\Helix\ConvertWttLogToXUnit.ps1
-    arguments: -WttInputPath '${{ parameters.testLogPath }}' -WttSingleRerunInputPath 'unused.wtl' -WttMultipleRerunInputPath 'unused2.wtl' -XUnitOutputPath 'onBuildMachineResults.xml' -TestNamePrefix '$(BuildConfiguration).$(BuildPlatform)'
-  condition: and(ne(variables['PGOBuildMode'], 'Instrument'),or(eq(variables['BuildPlatform'], 'x64'), eq(variables['BuildPlatform'], 'x86')))
-
-- task: PublishTestResults@2
-  displayName: 'Upload converted test logs'
-  condition: ne(variables['PGOBuildMode'], 'Instrument')
-  inputs:
-    testResultsFormat: 'xUnit' # Options: JUnit, NUnit, VSTest, xUnit, cTest
-    testResultsFiles: '**/onBuildMachineResults.xml'
-    #searchFolder: '$(System.DefaultWorkingDirectory)' # Optional
-    #mergeTestResults: false # Optional
-    #failTaskOnFailedTests: false # Optional
-    testRunTitle: 'On Build Machine Tests' # Optional
-    buildPlatform: $(BuildPlatform) # Optional
-    buildConfiguration: $(BuildConfiguration) # Optional
-    #publishRunAttachments: true # Optional
-
-- task: CopyFiles@2
-  displayName: 'Copy result logs to Artifacts'
-  inputs:
-    Contents: |
-     **/*.wtl
-     **/*onBuildMachineResults.xml
-     ${{ parameters.testLogPath }}
-    TargetFolder: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/$(BuildPlatform)/test'
-    OverWrite: true
-    flattenFolders: true
+    testAssemblyVer2: |
+      $(BUILD.SOURCESDIRECTORY)\**\*feature.test*.dll
+      !**\obj\**
+    runSettingsFile: '$(BUILD.SOURCESDIRECTORY)\src\unit.tests.$(BuildPlatform).runsettings'
+    codeCoverageEnabled: true
+    runInParallel: False
+    testRunTitle: 'Console Feature Tests'
+    platform: '$(BuildPlatform)'
+    configuration: '$(BuildConfiguration)'
+  condition: and(succeeded(), eq(variables['BuildPlatform'], 'x64'))
 
 - task: CopyFiles@2
   displayName: 'Copy *.appx/*.msix to Artifacts (Non-PR builds only)'
@@ -167,47 +85,11 @@ steps:
     TargetFolder: '$(Build.ArtifactStagingDirectory)/appx'
     OverWrite: true
     flattenFolders: true
-  condition: succeeded()
-
-- task: CopyFiles@2
-  displayName: 'Copy outputs needed for test runs to Artifacts'
-  inputs:
-    Contents: |
-     $(Build.SourcesDirectory)/bin/$(RationalizedBuildPlatform)/$(BuildConfiguration)/*.exe
-     $(Build.SourcesDirectory)/bin/$(RationalizedBuildPlatform)/$(BuildConfiguration)/*.dll
-     $(Build.SourcesDirectory)/bin/$(RationalizedBuildPlatform)/$(BuildConfiguration)/*.xml
-     **/Microsoft.VCLibs.*.appx
-     **/TestHostApp/*.exe
-     **/TestHostApp/*.dll
-     **/TestHostApp/*.xml
-     !**/*.pdb
-     !**/*.ipdb
-     !**/*.obj
-     !**/*.pch
-    TargetFolder: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/$(BuildPlatform)/test'
-    OverWrite: true
-    flattenFolders: true
-  condition: succeeded()
+  condition: and(succeeded(), ne(variables['Build.Reason'], 'PullRequest'))
 
 - task: PublishBuildArtifacts@1
-  displayName: 'Publish All Build Artifacts'
+  displayName: 'Publish Artifact (appx) (Non-PR builds only)'
   inputs:
-    PathtoPublish: '$(Build.ArtifactStagingDirectory)'
-    ArtifactName: 'drop'  
-
-- task: CopyFiles@2
-  displayName: 'Copy PGO databases needed for PGO instrumentation run'
-  inputs:
-    Contents: |
-     **/*.pgd
-    TargetFolder: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/PGO/$(BuildPlatform)'
-    OverWrite: true
-    flattenFolders: true
-  condition: and(succeeded(), eq(variables['PGOBuildMode'], 'Instrument'))
-
-- task: PublishBuildArtifacts@1
-  displayName: 'Publish All PGO Artifacts'
-  inputs:
-    PathtoPublish: '$(Build.ArtifactStagingDirectory)/$(BuildConfiguration)/PGO'
-    ArtifactName: 'PGO'
-  condition: and(succeeded(), eq(variables['PGOBuildMode'], 'Instrument'))
+    PathtoPublish: '$(Build.ArtifactStagingDirectory)/appx'
+    ArtifactName: 'appx-$(BuildConfiguration)'
+  condition: and(succeeded(), ne(variables['Build.Reason'], 'PullRequest'))

build/pipelines/templates/check-formatting.yml

@@ -1,17 +0,0 @@
-
-jobs:
-- job: CodeFormatCheck
-  displayName: Proper Code Formatting Check
-  pool: { vmImage: windows-2019 }
-
-  steps:
-  - checkout: self
-    fetchDepth: 1
-    submodules: false
-    clean: true
-
-  - task: PowerShell@2
-    displayName: 'Code Formattting Check'
-    inputs:
-      targetType: filePath
-      filePath: '.\build\scripts\Invoke-FormattingCheck.ps1'

build/pipelines/templates/helix-createprojfile-steps.yml

@@ -1,15 +0,0 @@
-parameters:
-  condition: ''
-  testFilePath: ''
-  outputProjFileName: ''
-  testSuite: ''
-  taefQuery: ''
-
-steps:
-  - task: powershell@2
-    displayName: 'Create ${{ parameters.outputProjFileName }}'
-    condition: ${{ parameters.condition }}
-    inputs:
-      targetType: filePath
-      filePath: build\Helix\GenerateTestProjFile.ps1
-      arguments: -TestFile '${{ parameters.testFilePath }}' -OutputProjFile '$(Build.ArtifactStagingDirectory)\$(BuildConfiguration)\$(BuildPlatform)\${{ parameters.outputProjFileName }}' -JobTestSuiteName '${{ parameters.testSuite }}' -TaefPath '$(Build.SourcesDirectory)\build\Helix\packages\Microsoft.Taef.10.58.210305002\build\Binaries\x86' -TaefQuery '${{ parameters.taefQuery }}'

build/pipelines/templates/helix-processtestresults-job.yml

@@ -1,68 +0,0 @@
-parameters:
-  condition: 'succeededOrFailed()'
-  dependsOn: ''
-  rerunPassesRequiredToAvoidFailure: 5
-  minimumExpectedTestsExecutedCount: 10
-  checkJobAttempt: false
-  pgoArtifact: ''
-
-jobs:
-- job: ProcessTestResults
-  condition: ${{ parameters.condition }}
-  dependsOn: ${{ parameters.dependsOn }}
-  pool:
-    vmImage: 'windows-2019'
-  timeoutInMinutes: 120
-  variables:
-    helixOutputFolder: $(Build.SourcesDirectory)\HelixOutput
-
-  steps:
-  - task: powershell@2
-    displayName: 'UpdateUnreliableTests.ps1'
-    condition: succeededOrFailed()
-    env:
-      SYSTEM_ACCESSTOKEN: $(System.AccessToken)
-    inputs:
-      targetType: filePath
-      filePath: build\Helix\UpdateUnreliableTests.ps1
-      arguments: -RerunPassesRequiredToAvoidFailure '${{ parameters.rerunPassesRequiredToAvoidFailure }}'
-
-  - task: powershell@2
-    displayName: 'OutputTestResults.ps1'
-    condition: succeededOrFailed()
-    env:
-      SYSTEM_ACCESSTOKEN: $(System.AccessToken)
-    inputs:
-      targetType: filePath
-      filePath: build\Helix\OutputTestResults.ps1
-      arguments: -MinimumExpectedTestsExecutedCount '${{ parameters.minimumExpectedTestsExecutedCount }}' -CheckJobAttempt $${{ parameters.checkJobAttempt }}
-
-  - task: powershell@2
-    displayName: 'ProcessHelixFiles.ps1'
-    condition: succeededOrFailed()
-    env:
-      SYSTEM_ACCESSTOKEN: $(System.AccessToken)
-      HelixAccessToken: $(HelixApiAccessToken)
-    inputs:
-      targetType: filePath
-      filePath: build\Helix\ProcessHelixFiles.ps1
-      arguments: -OutputFolder '$(helixOutputFolder)'
-
-  - ${{if ne(parameters.pgoArtifact, '') }}:
-    - script: move /y $(helixOutputFolder)\PGO $(Build.ArtifactStagingDirectory)
-      displayName: 'Move pgc files to PGO artifact'
-
-  - task: PublishBuildArtifacts@1
-    displayName: 'Publish Helix files'
-    condition: succeededOrFailed()
-    inputs:
-      PathtoPublish: $(helixOutputFolder)
-      artifactName: drop
-
-  - ${{if ne(parameters.pgoArtifact, '') }}:
-    - task: PublishBuildArtifacts@1
-      displayName: 'Publish pgc files'
-      condition: succeededOrFailed()
-      inputs:
-        PathtoPublish: $(Build.ArtifactStagingDirectory)\PGO\Release
-        artifactName: ${{ parameters.pgoArtifact }}

build/pipelines/templates/helix-runtests-job.yml

@@ -1,150 +0,0 @@
-parameters:
-  name: 'RunTestsInHelix'
-  dependsOn: ''
-  condition: ''
-  testSuite: ''
-  # If a Pipeline runs this template more than once, this parameter should be unique per build flavor to differentiate the
-  # the different test runs:
-  helixType: 'test/devtest'
-  artifactName: 'drop'
-  maxParallel: 4
-  rerunPassesRequiredToAvoidFailure: 5
-  taefQuery: ''
-  configuration: ''
-  platform: ''
-  # if 'useBuildOutputFromBuildId' is set, we will default to using a build from this pipeline:
-  useBuildOutputFromPipeline: $(System.DefinitionId)
-  openHelixTargetQueues: 'windows.10.amd64.client19h1.open.xaml'
-
-jobs:
-- job: ${{ parameters.name }}
-  dependsOn: ${{ parameters.dependsOn }}
-  condition: ${{ parameters.condition }}
-  pool:
-    vmImage: 'windows-2019'
-  timeoutInMinutes: 120
-  strategy:
-    maxParallel: ${{ parameters.maxParallel }}
-  variables:
-    buildConfiguration: ${{ parameters.configuration }}
-    buildPlatform: ${{ parameters.platform }}
-    openHelixTargetQueues: ${{ parameters.openHelixTargetQueues }}
-    artifactsDir: $(Build.SourcesDirectory)\Artifacts
-    taefPath: $(Build.SourcesDirectory)\build\Helix\packages\Microsoft.Taef.10.58.210305002\build\Binaries\$(buildPlatform)
-    helixCommonArgs: '/binaryLogger:$(Build.SourcesDirectory)/${{parameters.name}}.$(buildPlatform).$(buildConfiguration).binlog /p:HelixBuild=$(Build.BuildId).$(buildPlatform).$(buildConfiguration) /p:Platform=$(buildPlatform) /p:Configuration=$(buildConfiguration) /p:HelixType=${{parameters.helixType}} /p:TestSuite=${{parameters.testSuite}} /p:ProjFilesPath=$(Build.ArtifactStagingDirectory) /p:rerunPassesRequiredToAvoidFailure=${{parameters.rerunPassesRequiredToAvoidFailure}}'
-
-
-  steps:
-  - task: CmdLine@1
-    displayName: 'Display build machine environment variables'
-    inputs:
-      filename: 'set'
-
-  - task: NuGetToolInstaller@0
-    displayName: 'Use NuGet 5.2.0'
-    inputs:
-      versionSpec: 5.2.0
-
-  - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-    displayName: 'NuGet restore build/Helix/packages.config'
-    inputs:
-      restoreSolution: build/Helix/packages.config
-      feedsToUse: config
-      nugetConfigPath: nuget.config
-      restoreDirectory: packages
-
-  - task: DownloadBuildArtifacts@0
-    condition:
-      and(succeeded(),eq(variables['useBuildOutputFromBuildId'],''))
-    inputs:
-      artifactName: ${{ parameters.artifactName }}
-      downloadPath: '$(artifactsDir)'
-
-  - task: DownloadBuildArtifacts@0
-    condition:
-      and(succeeded(),ne(variables['useBuildOutputFromBuildId'],''))
-    inputs:
-      buildType: specific
-      buildVersionToDownload: specific
-      project: $(System.TeamProjectId)
-      pipeline: ${{ parameters.useBuildOutputFromPipeline }}
-      buildId: $(useBuildOutputFromBuildId)
-      artifactName: ${{ parameters.artifactName }}
-      downloadPath: '$(artifactsDir)'
-
-  - task: CmdLine@1
-    displayName: 'Display Artifact Directory payload contents'
-    inputs:
-      filename: 'dir'
-      arguments: '/s $(artifactsDir)'
-
-  - task: powershell@2
-    displayName: 'PrepareHelixPayload.ps1'
-    inputs:
-      targetType: filePath
-      filePath: build\Helix\PrepareHelixPayload.ps1
-      arguments: -Platform '$(buildPlatform)' -Configuration '$(buildConfiguration)' -ArtifactName '${{ parameters.artifactName }}'
-
-  - task: CmdLine@1
-    displayName: 'Display Helix payload contents'
-    inputs:
-      filename: 'dir'
-      arguments: '/s $(Build.SourcesDirectory)\HelixPayload'
-
-  - task: PowerShell@2
-    displayName: 'Make artifact directories'
-    inputs:
-      targetType: inline
-      script: |
-        New-Item -ItemType Directory -Force -Path "$(Build.ArtifactStagingDirectory)\$(BuildConfiguration)\"
-        New-Item -ItemType Directory -Force -Path "$(Build.ArtifactStagingDirectory)\$(BuildConfiguration)\$(BuildPlatform)\"
-
-  - template: helix-createprojfile-steps.yml
-    parameters:
-      condition: and(succeeded(),eq('${{ parameters.testSuite }}','DevTestSuite'))
-      testFilePath: '$(artifactsDir)\${{ parameters.artifactName }}\$(buildConfiguration)\$(buildPlatform)\Test\TerminalApp.LocalTests.dll'
-      outputProjFileName: 'RunTestsInHelix-TerminalAppLocalTests.proj'
-      testSuite: '${{ parameters.testSuite }}'
-      taefQuery: ${{ parameters.taefQuery }}
-
-  - template: helix-createprojfile-steps.yml
-    parameters:
-      condition: and(succeeded(),eq('${{ parameters.testSuite }}','DevTestSuite'))
-      testFilePath: '$(artifactsDir)\${{ parameters.artifactName }}\$(buildConfiguration)\$(buildPlatform)\Test\SettingsModel.LocalTests.dll'
-      outputProjFileName: 'RunTestsInHelix-SettingsModelLocalTests.proj'
-      testSuite: '${{ parameters.testSuite }}'
-      taefQuery: ${{ parameters.taefQuery }}
-
-
-  - template: helix-createprojfile-steps.yml
-    parameters:
-      condition: and(succeeded(),eq('${{ parameters.testSuite }}','DevTestSuite'))
-      testFilePath: '$(artifactsDir)\${{ parameters.artifactName }}\$(buildConfiguration)\$(buildPlatform)\Test\Conhost.UIA.Tests.dll'
-      outputProjFileName: 'RunTestsInHelix-HostTestsUIA.proj'
-      testSuite: '${{ parameters.testSuite }}'
-      taefQuery: ${{ parameters.taefQuery }}
-
-  - template: helix-createprojfile-steps.yml
-    parameters:
-      condition: and(succeeded(),or(eq('${{ parameters.testSuite }}','PgoInstrumentationSuite'),eq('${{ parameters.testSuite }}','DevTestSuite')))
-      testFilePath: '$(artifactsDir)\${{ parameters.artifactName }}\$(buildConfiguration)\$(buildPlatform)\Test\WindowsTerminal.UIA.Tests.dll'
-      outputProjFileName: 'RunTestsInHelix-WindowsTerminalUIATests.proj'
-      testSuite: '${{ parameters.testSuite }}'
-      taefQuery: ${{ parameters.taefQuery }}
-
-  - task: PublishBuildArtifacts@1
-    displayName: 'Publish generated .proj files'
-    inputs:
-      PathtoPublish: $(Build.ArtifactStagingDirectory)
-      artifactName: ${{ parameters.artifactName }}
-
-  - task: DotNetCoreCLI@2
-    displayName: 'Run tests in Helix (open queues)'
-    env:
-      SYSTEM_ACCESSTOKEN: $(System.AccessToken)
-    inputs:
-      command: custom
-      projects: build\Helix\RunTestsInHelix.proj
-      custom: msbuild
-      arguments: '$(helixCommonArgs) /p:IsExternal=true /p:Creator=Terminal /p:HelixTargetQueues=$(openHelixTargetQueues)'
-

build/pipelines/templates/pgo-build-and-publish-nuget-job.yml

@@ -1,62 +0,0 @@
-# From our friends at MUX: https://github.com/microsoft/microsoft-ui-xaml/blob/main/build/AzurePipelinesTemplates/MUX-BuildAndPublishPGONuGet-Job.yml
-
-parameters:
-  dependsOn: ''
-  pgoArtifact: PGO
-
-jobs:
-- job: BuildAndPublishPGONuGet
-  dependsOn: ${{ parameters.dependsOn }}
-  pool:
-    vmImage: 'windows-2019'
-  variables:
-    artifactsPath: $(Build.SourcesDirectory)\Artifacts
-    pgoToolsPath: $(Build.SourcesDirectory)\tools\PGODatabase
-    nuspecPath: $(pgoToolsPath)\NuSpecs
-    nuspecFilename: PGO.nuspec
-
-  steps:
-  - task: DownloadBuildArtifacts@0
-    inputs:
-      artifactName: ${{ parameters.pgoArtifact }}
-      downloadPath: $(artifactsPath)
-  
-  - task: NuGetToolInstaller@0
-    displayName: 'Use NuGet 5.2.0'
-    inputs:
-      versionSpec: 5.2.0
-
-  - task: CopyFiles@2
-    displayName: 'Copy pgd files to NuGet build directory'
-    inputs:
-      sourceFolder: $(artifactsPath)\${{ parameters.pgoArtifact }}
-      contents: '**\*.pgd'
-      targetFolder: $(nuspecPath)\tools
-
-  - task: powershell@2
-    displayName: 'Generate NuSpec file'
-    inputs:
-      targetType: filePath
-      filePath: $(pgoToolsPath)\generate-nuspec.ps1
-      workingDirectory: $(pgoToolsPath)
-      arguments: $(nuspecPath)\$(nuspecFilename).template $(nuspecPath)\$(nuspecFilename)
-
-  - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-    displayName: 'NuGet pack'
-    inputs:
-      command: pack
-      packagesToPack: '$(nuspecPath)\$(nuspecFilename)'
-      basePath: '$(nuspecPath)'
-      packDestination: '$(Build.ArtifactStagingDirectory)'
-
-  - task: PublishBuildArtifacts@1
-    inputs:
-      pathToPublish: $(Build.ArtifactStagingDirectory)
-      artifactName: ${{ parameters.pgoArtifact }}
-
-  - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
-    displayName: 'NuGet push'
-    inputs:
-      command: push
-      publishVstsFeed: Terminal/TerminalDependencies
-      packagesToPush: $(Build.ArtifactStagingDirectory)/*.nupkg

build/pipelines/templates/pgo-merge-pgd-job.yml

@@ -1,90 +0,0 @@
-parameters:
-  dependsOn: ''
-  pgoArtifact: PGO
-  platform: ''
-
-jobs:
-- job: MergePGD
-  dependsOn: ${{ parameters.dependsOn }}
-  pool:
-    vmImage: 'windows-2019'
-  variables:
-    artifactsPath: $(Build.SourcesDirectory)\Artifacts
-    pgoArtifactsPath: $(artifactsPath)\${{ parameters.pgoArtifact }}
-    buildPlatform: ${{ parameters.platform }}
-
-  steps:
-  # The environment variable VCToolsInstallDir isn't defined on lab machines, so we need to retrieve it ourselves.
-  - script: |
-      "%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -Latest -requires Microsoft.Component.MSBuild -property InstallationPath > %TEMP%\vsinstalldir.txt
-      set /p _VSINSTALLDIR15=<%TEMP%\vsinstalldir.txt
-      del %TEMP%\vsinstalldir.txt
-      call "%_VSINSTALLDIR15%\Common7\Tools\VsDevCmd.bat"
-      echo VCToolsInstallDir = %VCToolsInstallDir%
-      echo ##vso[task.setvariable variable=VCToolsInstallDir]%VCToolsInstallDir%
-    displayName: 'Retrieve VC tools directory'
-
-  - task: DownloadBuildArtifacts@0
-    inputs:
-      artifactName: ${{ parameters.pgoArtifact }}
-      downloadPath: $(artifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge WindowsTerminal*.pgc WindowsTerminal.pgd
-    displayName: 'Merge Terminal pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge OpenConsole*.pgc OpenConsole.pgd
-    displayName: 'Merge OpenConsole pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge Microsoft.Terminal.Control*.pgc Microsoft.Terminal.Control.pgd
-    displayName: 'Merge Microsoft.Terminal.Control pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge Microsoft.Terminal.Remoting*.pgc Microsoft.Terminal.Remoting.pgd
-    displayName: 'Merge Microsoft.Terminal.Remoting pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge Microsoft.Terminal.Settings.Editor*.pgc Microsoft.Terminal.Settings.Editor.pgd
-    displayName: 'Merge Microsoft.Terminal.Settings.Editor pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge Microsoft.Terminal.Settings.Model*.pgc Microsoft.Terminal.Settings.Model.pgd
-    displayName: 'Merge Microsoft.Terminal.Settings.Model pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge TerminalApp*.pgc TerminalApp.pgd
-    displayName: 'Merge TerminalApp pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - script: |
-      cd $(buildPlatform)
-      "%VCToolsInstallDir%\bin\hostx64\x64\pgomgr.exe" /merge TerminalConnection*.pgc TerminalConnection.pgd
-    displayName: 'Merge TerminalConnection pgc files into pgd'
-    workingDirectory: $(pgoArtifactsPath)
-
-  - task: CopyFiles@2
-    displayName: 'Copy merged pgd to artifact staging'
-    inputs:
-      sourceFolder: $(pgoArtifactsPath)
-      contents: '**\$(buildPlatform)\*.pgd'
-      targetFolder: $(Build.ArtifactStagingDirectory)
-
-  - task: PublishBuildArtifacts@1
-    inputs:
-      pathToPublish: $(Build.ArtifactStagingDirectory)
-      artifactName: ${{ parameters.pgoArtifact }}

build/pipelines/templates/release-sign-and-bundle.yml

@@ -10,15 +10,13 @@ jobs:
     - Buildx64Release
     - Buildx86Release
     - Buildarm64Release
-    - CodeFormatCheck
   condition: |
     and
     (
       in(dependencies.Buildx64AuditMode.result, 'Succeeded', 'SucceededWithIssues', 'Skipped'),
       in(dependencies.Buildx64Release.result,   'Succeeded', 'SucceededWithIssues', 'Skipped'),
       in(dependencies.Buildx86Release.result,   'Succeeded', 'SucceededWithIssues', 'Skipped'),
-      in(dependencies.Buildarm64Release.result, 'Succeeded', 'SucceededWithIssues', 'Skipped'),
-      in(dependencies.CodeFormatCheck.result,   'Succeeded', 'SucceededWithIssues', 'Skipped')
+      in(dependencies.Buildarm64Release.result, 'Succeeded', 'SucceededWithIssues', 'Skipped')
     )
 
   variables:

build/rules/Branding.targets

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <_WTBrandingPreprocessorToken Condition="'$(WindowsTerminalBranding)'=='Preview'">WT_BRANDING_PREVIEW</_WTBrandingPreprocessorToken>
-    <_WTBrandingPreprocessorToken Condition="'$(WindowsTerminalBranding)'=='Release'">WT_BRANDING_RELEASE</_WTBrandingPreprocessorToken>
-    <_WTBrandingPreprocessorToken Condition="'$(_WTBrandingPreprocessorToken)'==''">WT_BRANDING_DEV</_WTBrandingPreprocessorToken>
-  </PropertyGroup>
-
-  <ItemDefinitionGroup>
-    <ClCompile>
-      <PreprocessorDefinitions>$(_WTBrandingPreprocessorToken);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ClCompile>
-
-    <ResourceCompile>
-      <PreprocessorDefinitions>$(_WTBrandingPreprocessorToken);%(PreprocessorDefinitions)</PreprocessorDefinitions>
-    </ResourceCompile>
-  </ItemDefinitionGroup>
-</Project>

build/rules/CollectWildcardResources.targets

@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="16.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-  </PropertyGroup>
-
-  <Target Name="BeforeGenerateProjectPriFile" DependsOnTargets="OpenConsoleCollectWildcardPRIFiles" />
-
-  <!--
-    The vcxproj system does not support wildcards at the root level of a project.
-    This poses a problem, as we want to include resw files that are not checked into the
-    repository. Since they're usually localized and stored in directories named after
-    their languages, we can't exactly explicitly simultaneously list them all and remain
-    sane. We want to use wildcards to make our lives easier.
-
-    This rule takes OCResourceDirectory items and includes all resw files that live
-    underneath them.
-
-    ** TIRED **
-    (does not work because of wildcards)
-    <PRIResource Include="Resources/*/Resources.resw" />
-
-    ** WIRED **
-    (keep the en-US resource in the project, because it is checked in and VS will show it)
-    <PRIResource Include="Resources/en-US/Resources.resw" />
-    <OCResourceDirectory Include="Resources" />
-  -->
-  <Target Name="OpenConsoleCollectWildcardPRIFiles">
-    <CreateItem Include="@(OCResourceDirectory->'%(Identity)\**\*.resw')">
-      <Output TaskParameter="Include" ItemName="_OCFoundPRIFiles" />
-    </CreateItem>
-    <ItemGroup>
-      <_OCFoundPRIFiles Include="@(PRIResource)" />
-      <PRIResource Remove="@(PRIResource)" />
-      <PRIResource Include="@(_OCFoundPRIFiles->Distinct())" />
-    </ItemGroup>
-    <Message Text="$(ProjectName) (wildcard PRIs) -> @(PRIResource)" />
-  </Target>
-</Project>

build/rules/GenerateSxsManifestsFromWinmds.targets

@@ -1,41 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="16.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <BeforeLinkTargets Condition="'$(WindowsTargetPlatformVersion)' &gt;= '10.0.18362.0'">
-      $(BeforeLinkTargets);
-      _ConsoleGenerateAdditionalWinmdManifests;
-    </BeforeLinkTargets>
-  </PropertyGroup>
-
-  <Target Name="_ConsoleMapWinmdsToManifestFiles" DependsOnTargets="ResolveAssemblyReferences">
-    <ItemGroup>
-      <!-- For each non-system .winmd file in References, generate a .manifest in IntDir for it. -->
-      <_ConsoleWinmdManifest Include="@(ReferencePath->'$(IntDir)\%(FileName).manifest')" Condition="'%(ReferencePath.IsSystemReference)' != 'true' and '%(ReferencePath.WinMDFile)' == 'true' and '%(ReferencePath.ReferenceSourceTarget)' == 'ResolveAssemblyReference' and '%(ReferencePath.Implementation)' != ''">
-        <WinMDPath>%(ReferencePath.FullPath)</WinMDPath>
-        <Implementation>%(ReferencePath.Implementation)</Implementation>
-      </_ConsoleWinmdManifest>
-      <!-- For each referenced project that _produces_ a winmd, generate a temporary item that maps to
-           the winmd, and use that temporary item to generate a .manifest in IntDir for it.
-           We don't set Implementation here because it's inherited from the _ResolvedNativeProjectReferencePaths. -->
-      <_ConsoleWinmdProjectReference Condition="'%(_ResolvedNativeProjectReferencePaths.ProjectType)' != 'StaticLibrary'" Include="@(_ResolvedNativeProjectReferencePaths-&gt;WithMetadataValue('FileType','winmd')-&gt;'%(RootDir)%(Directory)%(TargetPath)')" />
-      <_ConsoleWinmdManifest Include="@(_ConsoleWinmdProjectReference->'$(IntDir)\%(FileName).manifest')">
-        <WinMDPath>%(Identity)</WinMDPath>
-      </_ConsoleWinmdManifest>
-    </ItemGroup>
-  </Target>
-
-  <Target Name="_ConsoleGenerateAdditionalWinmdManifests"
-          Inputs="@(_ConsoleWinmdManifest.WinMDPath)"
-          Outputs="@(_ConsoleWinmdManifest)"
-          DependsOnTargets="_ConsoleMapWinmdsToManifestFiles">
-
-    <!-- This target is batched and a new Exec is spawned for each entry in _ConsoleWinmdManifest. -->
-    <Exec Command="mt.exe -winmd:%(_ConsoleWinmdManifest.WinMDPath) -dll:%(_ConsoleWinmdManifest.Implementation) -out:%(_ConsoleWinmdManifest.Identity)" />
-
-    <ItemGroup>
-      <!-- Emit the generated manifest into the Link inputs. -->
-      <Manifest Include="@(_ConsoleWinmdManifest)" />
-    </ItemGroup>
-
-  </Target>
-</Project>

build/scripts/Create-AppxBundle.ps1

@@ -22,7 +22,7 @@ Param(
     [Parameter(HelpMessage="Path to makeappx.exe")]
     [ValidateScript({Test-Path $_ -Type Leaf})]
     [string]
-    $MakeAppxPath = "C:\Program Files (x86)\Windows Kits\10\bin\10.0.19041.0\x86\MakeAppx.exe"
+    $MakeAppxPath = "C:\Program Files (x86)\Windows Kits\10\bin\10.0.17763.0\x86\MakeAppx.exe"
 )
 
 If ($null -Eq (Get-Item $MakeAppxPath -EA:SilentlyContinue)) {

build/scripts/Generate-ThirdPartyNotices.ps1

@@ -1,14 +0,0 @@
-[CmdletBinding()]
-Param(
-    [Parameter(Position=0, Mandatory=$true)][string]$MarkdownNoticePath,
-    [Parameter(Position=1, Mandatory=$true)][string]$OutputPath
-)
-
-@"
-<html>
-  <head><title>Third-Party Notices</title></head>
-  <body>
-  $(ConvertFrom-Markdown $MarkdownNoticePath | Select -Expand Html)
-  </body>
-</html>
-"@ | Out-File -Encoding UTF-8 $OutputPath -Force

build/scripts/Get-WttLog.ps1

@@ -1,15 +0,0 @@
-[CmdLetBinding()]
-Param(
-    [Parameter(Mandatory=$true, Position=0)][string]$BuildPlatform,
-    [Parameter(Mandatory=$true, Position=1)][string]$RationalizedPlatform,
-    [Parameter(Mandatory=$true, Position=2)][string]$Configuration
-)
-
-
-$i = Get-Item .\packages\MuxCustomBuild*
-$wtt = Join-Path -Path $i[0].FullName -ChildPath (Join-Path -Path 'tools' -ChildPath (Join-Path -Path $BuildPlatform -ChildPath 'wttlog.dll'))
-$dest = Join-Path -Path .\bin -ChildPath (Join-Path -Path $RationalizedPlatform -ChildPath ($Configuration))
-copy $wtt $dest
-
-
-Exit 0

build/scripts/Index-Pdbs.ps1

@@ -1,85 +0,0 @@
-[CmdLetBinding()]
-Param(
-    [Parameter(Mandatory=$true, Position=0)][string]$SearchDir,
-    [Parameter(Mandatory=$true, Position=1)][string]$SourceRoot,
-    [Parameter(Mandatory=$true, Position=2)][string]$CommitId,
-    [string]$Organization = "microsoft",
-    [string]$Repo = "terminal",
-    [switch]$recursive
-)
-
-$debuggerPath = (Get-ItemProperty -path "HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows Kits\Installed Roots" -name WindowsDebuggersRoot10).WindowsDebuggersRoot10
-$srcsrvPath = Join-Path $debuggerPath "x64\srcsrv"
-$srctoolExe = Join-Path $srcsrvPath "srctool.exe"
-$pdbstrExe = Join-Path $srcsrvPath "pdbstr.exe"
-
-$fileTable = @{}
-foreach ($gitFile in & git ls-files)
-{
-    $fileTable[$gitFile] = $gitFile
-}
-
-$mappedFiles = New-Object System.Collections.ArrayList
-
-foreach ($file in (Get-ChildItem -r:$recursive "$SearchDir\*.pdb"))
-{
-    Write-Verbose "Found $file"
-
-    $ErrorActionPreference = "Continue" # Azure Pipelines defaults to "Stop", continue past errors in this script.
-    
-    $allFiles = & $srctoolExe -r "$file"
-
-    # If the pdb didn't have enough files then skip it (the srctool output has a blank line even when there's no info
-    # so check for less than 2 lines)
-    if ($allFiles.Length -lt 2)
-    {
-        continue
-    }
-
-    for ($i = 0; $i -lt $allFiles.Length; $i++)
-    {
-        if ($allFiles[$i].StartsWith($SourceRoot, [StringComparison]::OrdinalIgnoreCase))
-        {
-            $relative = $allFiles[$i].Substring($SourceRoot.Length).TrimStart("\")
-            $relative = $relative.Replace("\", "/")
-
-            # Git urls are case-sensitive but the PDB might contain a lowercased version of the file path.
-            # Look up the relative url in the output of "ls-files". If it's not there then it's not something
-            # in git, so don't index it.
-            $relative = $fileTable[$relative]
-            if ($relative)
-            {
-                $mapping = $allFiles[$i] + "*$relative"
-                $mappedFiles.Add($mapping)
-
-                Write-Verbose "Mapped path $($i): $mapping"
-            }
-        }
-    }
-
-    $pdbstrFile = Join-Path "$env:TEMP" "pdbstr.txt"
-
-    Write-Verbose "pdbstr.txt = $pdbstrFile"
-
-    @"
-SRCSRV: ini ------------------------------------------------
-VERSION=2
-VERCTRL=http
-SRCSRV: variables ------------------------------------------
-ORGANIZATION=$Organization
-REPO=$Repo
-COMMITID=$CommitId
-HTTP_ALIAS=https://raw.githubusercontent.com/%ORGANIZATION%/%REPO%/%COMMITID%/
-HTTP_EXTRACT_TARGET=%HTTP_ALIAS%%var2%
-SRCSRVTRG=%HTTP_EXTRACT_TARGET%
-SRC_INDEX=public
-SRCSRV: source files ---------------------------------------
-$($mappedFiles -join "`r`n")
-SRCSRV: end ------------------------------------------------
-"@ | Set-Content $pdbstrFile
-
-    & $pdbstrExe -p:"$file" -w -s:srcsrv -i:$pdbstrFile
-}
-
-# Return with exit 0 to override any weird error code from other tools
-Exit 0

build/scripts/Invoke-FormattingCheck.ps1

@@ -1,26 +0,0 @@
-
-#.SYNOPSIS
-# Checks for code formatting errors. Will throw exception if any are found.
-function Invoke-CheckBadCodeFormatting() {
-    Import-Module ./tools/OpenConsole.psm1
-
-    # Don't run the XAML formatter in this step - even if it changes nothing,
-    # it'll still touch all the .xaml files.
-    Invoke-CodeFormat -IgnoreXaml
-
-    # returns a non-zero exit code if there are any diffs in the tracked files in the repo
-    git diff-index --quiet HEAD --
-    if ($lastExitCode -eq 1) {
-
-        # Write the list of files that need updating to the log
-        git diff-index --name-only HEAD
-
-        throw "code formatting bad, run Invoke-CodeFormat on branch"
-    }
-
-    # Manually check the formatting of our .xaml files, without touching them.
-    Test-XamlFormat
-
-}
-
-Invoke-CheckBadCodeFormatting

build/scripts/Run-Tests.ps1

@@ -1,26 +0,0 @@
-[CmdLetBinding()]
-Param(
-    [Parameter(Mandatory=$true, Position=0)][string]$MatchPattern,
-    [Parameter(Mandatory=$true, Position=1)][string]$Platform,
-    [Parameter(Mandatory=$true, Position=2)][string]$Configuration,
-    [Parameter(Mandatory=$false, Position=3)][string]$LogPath
-)
-
-$testdlls = Get-ChildItem -Path ".\bin\$Platform\$Configuration" -Recurse -Filter $MatchPattern
-
-
-$args = @();
-
-if ($LogPath)
-{
-    $args += '/enablewttlogging';
-    $args += '/appendwttlogging';
-    $args += "/logFile:$LogPath";
-    Write-Host "Wtt Logging Enabled";
-}
-
-&".\bin\$Platform\$Configuration\te.exe" $args $testdlls.FullName
-
-if ($lastexitcode -Ne 0) { Exit $lastexitcode }
-
-Exit 0

build/scripts/Test-WindowsTerminalPackage.ps1

@@ -1,115 +0,0 @@
-[CmdletBinding()]
-Param(
-    [Parameter(Mandatory=$true, ValueFromPipeline=$true,
-      HelpMessage="Path to the .appx/.msix to validate")]
-    [string]
-    $Path,
-
-    [Parameter(HelpMessage="Path to Windows Kit")]
-    [ValidateScript({Test-Path $_ -Type Leaf})]
-    [string]
-    $WindowsKitPath = "C:\Program Files (x86)\Windows Kits\10\bin\10.0.19041.0"
-)
-
-$ErrorActionPreference = "Stop"
-
-If ($null -Eq (Get-Item $WindowsKitPath -EA:SilentlyContinue)) {
-    Write-Error "Could not find a windows SDK at at `"$WindowsKitPath`".`nMake sure that WindowsKitPath points to a valid SDK."
-    Exit 1
-}
-
-$makeAppx = "$WindowsKitPath\x86\MakeAppx.exe"
-$makePri = "$WindowsKitPath\x86\MakePri.exe"
-
-Function Expand-ApplicationPackage {
-    Param(
-        [Parameter(Mandatory, ValueFromPipeline)]
-        [string]
-        $Path
-    )
-
-    $sentinelFile = New-TemporaryFile
-    $directory = New-Item -Type Directory "$($sentinelFile.FullName)_Package"
-    Remove-Item $sentinelFile -Force -EA:Ignore
-
-    & $makeAppx unpack /p $Path /d $directory /nv /o
-
-    If ($LastExitCode -Ne 0) {
-        Throw "Failed to expand AppX"
-    }
-
-    $directory
-}
-
-Write-Verbose "Expanding $Path"
-$AppxPackageRoot = Expand-ApplicationPackage $Path
-$AppxPackageRootPath = $AppxPackageRoot.FullName
-
-Write-Verbose "Expanded to $AppxPackageRootPath"
-
-Try {
-    & $makePri dump /if "$AppxPackageRootPath\resources.pri" /of "$AppxPackageRootPath\resources.pri.xml" /o
-    If ($LastExitCode -Ne 0) {
-        Throw "Failed to dump PRI"
-    }
-
-    $Manifest = [xml](Get-Content "$AppxPackageRootPath\AppxManifest.xml")
-    $PRIFile = [xml](Get-Content "$AppxPackageRootPath\resources.pri.xml")
-
-    ### Check the activatable class entries for a few DLLs we need.
-    $inProcServers = $Manifest.Package.Extensions.Extension.InProcessServer.Path
-    $RequiredInProcServers = ("TerminalApp.dll", "Microsoft.Terminal.Control.dll", "Microsoft.Terminal.Remoting.dll", "Microsoft.Terminal.Settings.Editor.dll", "Microsoft.Terminal.Settings.Model.dll", "TerminalConnection.dll")
-
-    Write-Verbose "InProc Servers: $inProcServers"
-
-    ForEach ($req in $RequiredInProcServers) {
-        If ($req -NotIn $inProcServers) {
-            Throw "Failed to find $req in InProcServer list $inProcServers"
-        }
-    }
-
-    $dependencies = $Manifest.Package.Dependencies.PackageDependency.Name
-    $depsHasVclibsDesktop = ("Microsoft.VCLibs.140.00.UWPDesktop" -in $dependencies) -or ("Microsoft.VCLibs.140.00.Debug.UWPDesktop" -in $dependencies)
-    $depsHasVcLibsAppX = ("Microsoft.VCLibs.140.00" -in $dependencies) -or ("Microsoft.VCLibs.140.00.Debug" -in $dependencies)
-    $filesHasVclibsDesktop = ($null -ne (Get-Item "$AppxPackageRootPath\vcruntime140.dll" -EA:Ignore)) -or ($null -ne (Get-Item "$AppxPackageRootPath\vcruntime140d.dll" -EA:Ignore))
-    $filesHasVclibsAppX = ($null -ne (Get-Item "$AppxPackageRootPath\vcruntime140_app.dll" -EA:Ignore)) -or ($null -ne (Get-Item "$AppxPackageRootPath\vcruntime140d_app.dll" -EA:Ignore))
-
-    If ($depsHasVclibsDesktop -Eq $filesHasVclibsDesktop) {
-        $eitherBoth = if ($depsHasVclibsDesktop) { "both" } else { "neither" }
-        $neitherNor = if ($depsHasVclibsDesktop) { "and" } else { "nor" }
-        Throw "Package has $eitherBoth Dependency $neitherNor Integrated Desktop VCLibs"
-    }
-
-    If ($depsHasVclibsAppx -Eq $filesHasVclibsAppx) {
-        if ($depsHasVclibsAppx) {
-            # We've shipped like this forever, so downgrade to warning.
-            Write-Warning "Package has both Dependency and Integrated AppX VCLibs"
-        } else {
-            Throw "Package has neither Dependency nor Integrated AppX VCLibs"
-        }
-    }
-
-    ### Check that we have an App.xbf (which is a proxy for our resources having been merged)
-    $resourceXpath = '/PriInfo/ResourceMap/ResourceMapSubtree[@name="Files"]/NamedResource[@name="App.xbf"]'
-    $AppXbf = $PRIFile.SelectSingleNode($resourceXpath)
-    If ($null -eq $AppXbf) {
-        Throw "Failed to find App.xbf (TerminalApp project) in resources.pri"
-    }
-
-    If (($null -eq (Get-Item "$AppxPackageRootPath\cpprest142_2_10.dll" -EA:Ignore)) -And
-        ($null -eq (Get-Item "$AppxPackageRootPath\cpprest142_2_10d.dll" -EA:Ignore))) {
-        Throw "Failed to find cpprest142_2_10.dll -- check the WAP packaging project"
-    }
-
-    If (($null -eq (Get-Item "$AppxPackageRootPath\wtd.exe" -EA:Ignore)) -And
-        ($null -eq (Get-Item "$AppxPackageRootPath\wt.exe" -EA:Ignore))) {
-        Throw "Failed to find wt.exe/wtd.exe -- check the WAP packaging project"
-    }
-
-    If ($null -eq (Get-Item "$AppxPackageRootPath\OpenConsole.exe" -EA:Ignore)) {
-        Throw "Failed to find OpenConsole.exe -- check the WAP packaging project"
-    }
-
-} Finally {
-    Remove-Item -Recurse -Force $AppxPackageRootPath
-}

consolegit2gitfilters.json

@@ -14,15 +14,9 @@
     "/.vs/",
     "/build/",
     "/src/cascadia/",
-    "/src/winconpty/",
     "/.nuget/",
     "/.github/",
-    "/samples/",
-    "/res/terminal/",
-    "/doc/specs/",
-    "/doc/cascadia/",
-    "/doc/user-docs/",
-    "/src/tools/MonarchPeasantSample/",
+    "/samples/"
   ],
   "SuffixFilters": [
     ".dbb",
@@ -37,8 +31,6 @@
     ".db",
     ".wrn",
     ".rec",
-    ".err",
-    "XamlStyler.json",
-    ".xlsx"
-  ]
+    ".err"
+  ]    
 }

custom.props

@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <!-- This file is read by XES, which we use in our Release builds. -->
-  <PropertyGroup Label="Version">
-    <XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
-    <XesBaseYearForStoreVersion>2021</XesBaseYearForStoreVersion>
-    <VersionMajor>1</VersionMajor>
-    <VersionMinor>9</VersionMinor>
-    <VersionInfoProductName>Windows Terminal</VersionInfoProductName>
-  </PropertyGroup>
-</Project>

dep/CLI11/README.md

@@ -1,5 +0,0 @@
-# CLI11
-
-Taken from [release v1.9.0](https://github.com/CLIUtils/CLI11/releases/tag/v1.9.0), source commit
-[dd0d8e4](https://github.com/CLIUtils/CLI11/commit/dd0d8e4fe729e5b1110232c7a5c9566dad884686)
-