Bump version

This was a hard decision to limit again, but with the inability to make Zstd the default for log compression, this is not a reasonable thing to enable for most users.

CHANGELIST.md

@@ -1,3 +1,111 @@
+### 3.5.0 (2025-10-10)
+
+- Add failure if media type could not be determined
+- Tweaks to how failure cases are reported
+- Rename log zip on collision
+- Update packages
+- Use CommandLine library for CLI executables
+- Create interactive mode features
+- Minor cleanup around last added
+- Add placeholder command set creation
+- Reduce unnecessary shared code
+- Create and use main features for CLI and Check
+- Create and use base feature in Check
+- Create and use base feature in CLI
+- Assign inputs for interactive modes
+- Remove duplicate input declarations
+- Fix strange invocations of extension methods
+- Remove CommandOptions implementations
+- Exit early on parsing failures
+- Fix minor typo in verify inputs check
+- Allow but do not require config for Check
+- Update packages
+- More consistency in commandline programs
+- Use GC.SharpCompress as archive handling library
+- Start wiring through log compression changes
+- Fix minor issues with options loading
+- Finalize wire-through and clean up
+- Minor cleanup on interactive modes
+- Add more useful credentials inputs for Check
+- More gracefully handle "missing" media types
+- Use null or empty instead of just null
+- Guard against unzippable files
+- Fix incorrect flagging of a failed check
+- Use ZipWriterOptions instead of generic
+- Allow skeleton creation for all media types
+- Fix default value tests
+- Only allow skeleton creation for CD and DVD
+- Add preemptive new file support
+- Add preemptive helper for Zstd handling
+- Pre-compress skeleton files with Zstd
+- Fix broken file count tests
+- Pre-compress state files with Zstd
+- Use block-based reading instead of CopyTo
+- Enable skeleton output for all CLI runs
+- Fix test broken by last commit
+- Support detecting split Wii for CleanRip
+- Try to handle Windows-specific compression issue
+
+### 3.4.2 (2025-09-30)
+
+- Fix starting index for CLI
+- Fix missed package update
+- Require exact versions for build
+
+### 3.4.1 (2025-09-29)
+
+- Experiment with only showing media type box for DIC
+- Default media type box to hidden to avoid visual issues
+- Limit media type visibility further
+- Set media type visibility when options changed
+- Change label with media type visibility
+- Update media type visibility on system change
+- Return full result from dump checks
+- Fix logic from around Macrovision security driver filtering
+- Remove SkipMediaTypeDetection option, cleanup options window
+- Minor tweaks to frontend code
+- Default to CD speed range
+- Skip trying to set speeds if no drives
+- Fix tests
+- Make media type a named parameter for CLI
+- Reduction in media type use for dumping
+- Update BinaryObjectScanner to 3.4.3
+
+### 3.4.0 (2025-09-25)
+
+- Remove media type from Check Dump UI
+- Always trust the output files for processing
+- UI consistency when parameters are editable
+- Let the processor always deal with unsupported
+- Put a try/catch around GenerateArtifacts
+- Reduce preprocessing in DumpEnvironment
+- Update RedumpLib to 1.6.9
+- Treat all UMD as DL visually
+- Add CopyUpdateUrlToClipboard option
+- Fix inconsistency with newlines
+- Update Aaru to build 5.4.1
+- Fix for C2 error doubling issue (fuzz6001)
+- Update RedumpLib and LibIRD
+- Update LibIRD
+- Update redumper to build 653
+- Minor cleanup
+- Update test Nuget packages
+- Update RedumpLib to 1.7.1
+- Support multisession cache files
+- Update DIC to 20250901 (Windows/Linux only)
+- Fix UIC processing logic
+- Update RedumpLib, detect Playmaji Polymega system
+- Update redumper to b655
+- Support new versioning format in redumper (fuzz6001)
+- Add RedumperRefineSectorMode setting
+- Update BinaryObjectScanner to 3.4.0
+- Add context-sensitive protections helper method
+- Further flesh out framework
+- Add filters to handle Release Control output (Bestest)
+- Cleanup last commits, add tests
+- Update BinaryObjectScanner to 3.4.2
+- Update RedumpLib to 1.7.4
+
 ### 3.3.3 (2025-07-18)
 
 - Handle layers for PS3CFW

MPF.CLI/Features/BaseFeature.cs

@@ -0,0 +1,269 @@
+
+using System;
+using System.IO;
+#if NET40
+using System.Threading.Tasks;
+#endif
+using MPF.Frontend;
+using MPF.Frontend.Tools;
+using SabreTools.RedumpLib.Data;
+using SabreTools.RedumpLib.Web;
+using LogCompression = MPF.Processors.LogCompression;
+
+namespace MPF.CLI.Features
+{
+    internal abstract class BaseFeature : SabreTools.CommandLine.Feature
+    {
+        #region Properties
+
+        /// <summary>
+        /// User-defined options
+        /// </summary>
+        public Options Options { get; protected set; }
+
+        /// <summary>
+        /// Currently-selected system
+        /// </summary>
+        public RedumpSystem? System { get; protected set; }
+
+        /// <summary>
+        /// Media type to dump
+        /// </summary>
+        /// <remarks>Required for DIC and if custom parameters not set</remarks>
+        public MediaType? MediaType { get; protected set; }
+
+        /// <summary>
+        /// Path to the device to dump
+        /// </summary>
+        /// <remarks>Required if custom parameters are not set</remarks>
+        public string? DevicePath { get; protected set; }
+
+        /// <summary>
+        /// Path to the mounted filesystem to check
+        /// </summary>
+        /// <remarks>Should only be used when the device path is not readable</remarks>
+        public string? MountedPath { get; protected set; }
+
+        /// <summary>
+        /// Path to the output file
+        /// </summary>
+        /// <remarks>Required if custom parameters are not set</remarks>
+        public string? FilePath { get; protected set; }
+
+        /// <summary>
+        /// Override drive speed
+        /// </summary>
+        public int? DriveSpeed { get; protected set; }
+
+        /// <summary>
+        /// Custom parameters for dumping
+        /// </summary>
+        public string? CustomParams { get; protected set; }
+
+        #endregion
+
+        protected BaseFeature(string name, string[] flags, string description, string? detailed = null)
+            : base(name, flags, description, detailed)
+        {
+            Options = new Options()
+            {
+                // Internal Program
+                InternalProgram = InternalProgram.NONE,
+
+                // Extra Dumping Options
+                ScanForProtection = false,
+                AddPlaceholders = true,
+                PullAllInformation = false,
+                AddFilenameSuffix = false,
+                OutputSubmissionJSON = false,
+                IncludeArtifacts = false,
+                CompressLogFiles = false,
+                LogCompression = LogCompression.DeflateMaximum,
+                DeleteUnnecessaryFiles = false,
+                CreateIRDAfterDumping = false,
+
+                // Protection Scanning Options
+                ScanArchivesForProtection = true,
+                IncludeDebugProtectionInformation = false,
+                HideDriveLetters = false,
+
+                // Redump Login Information
+                RetrieveMatchInformation = true,
+                RedumpUsername = null,
+                RedumpPassword = null,
+            };
+        }
+
+        /// <inheritdoc/>
+        public override bool Execute()
+        {
+            // Validate the supplied credentials
+            if (Options.RetrieveMatchInformation
+                && !string.IsNullOrEmpty(Options.RedumpUsername)
+                && !string.IsNullOrEmpty(Options.RedumpPassword))
+            {
+                bool? validated = RedumpClient.ValidateCredentials(Options.RedumpUsername!, Options.RedumpPassword!).GetAwaiter().GetResult();
+                string message = validated switch
+                {
+                    true => "Redump username and password accepted!",
+                    false => "Redump username and password denied!",
+                    null => "An error occurred validating your credentials!",
+                };
+
+                Console.WriteLine(message);
+            }
+
+            // Validate the internal program
+            switch (Options.InternalProgram)
+            {
+                case InternalProgram.Aaru:
+                    if (!File.Exists(Options.AaruPath))
+                    {
+                        Console.Error.WriteLine("A path needs to be supplied in config.json for Aaru, exiting...");
+                        return false;
+                    }
+                    break;
+
+                case InternalProgram.DiscImageCreator:
+                    if (!File.Exists(Options.DiscImageCreatorPath))
+                    {
+                        Console.Error.WriteLine("A path needs to be supplied in config.json for DIC, exiting...");
+                        return false;
+                    }
+                    break;
+
+                case InternalProgram.Redumper:
+                    if (!File.Exists(Options.RedumperPath))
+                    {
+                        Console.Error.WriteLine("A path needs to be supplied in config.json for Redumper, exiting...");
+                        return false;
+                    }
+                    break;
+
+                default:
+                    Console.Error.WriteLine($"{Options.InternalProgram} is not a supported dumping program, exiting...");
+                    break;
+            }
+
+            // Ensure we have the values we need
+            if (CustomParams == null && (DevicePath == null || FilePath == null))
+            {
+                Console.Error.WriteLine("Both a device path and file path need to be supplied, exiting...");
+                return false;
+            }
+            if (Options.InternalProgram == InternalProgram.DiscImageCreator
+                && CustomParams == null
+                && (MediaType == null || MediaType == SabreTools.RedumpLib.Data.MediaType.NONE))
+            {
+                Console.Error.WriteLine("Media type is required for DiscImageCreator, exiting...");
+                return false;
+            }
+
+            // Normalize the file path
+            if (FilePath != null)
+                FilePath = FrontendTool.NormalizeOutputPaths(FilePath, getFullPath: true);
+
+            // Get the speed from the options
+            int speed = DriveSpeed ?? FrontendTool.GetDefaultSpeedForMediaType(MediaType, Options);
+
+            // Populate an environment
+            var drive = Drive.Create(null, DevicePath ?? string.Empty);
+            var env = new DumpEnvironment(Options,
+                FilePath,
+                drive,
+                System,
+                Options.InternalProgram);
+            env.SetExecutionContext(MediaType, null);
+            env.SetProcessor();
+
+            // Process the parameters
+            string? paramStr = CustomParams ?? env.GetFullParameters(MediaType, speed);
+            if (string.IsNullOrEmpty(paramStr))
+            {
+                Console.Error.WriteLine("No valid environment could be created, exiting...");
+                return false;
+            }
+
+            env.SetExecutionContext(MediaType, paramStr);
+
+            // Invoke the dumping program
+            Console.WriteLine($"Invoking {Options.InternalProgram} using '{paramStr}'");
+            var dumpResult = env.Run(MediaType).GetAwaiter().GetResult();
+            Console.WriteLine(dumpResult.Message);
+            if (!dumpResult)
+                return false;
+
+            // If it was not a dumping command
+            if (!env.IsDumpingCommand())
+            {
+                Console.Error.WriteLine();
+                Console.WriteLine("Execution not recognized as dumping command, skipping processing...");
+                return true;
+            }
+
+            // If we have a mounted path, replace the environment
+            if (MountedPath != null && Directory.Exists(MountedPath))
+            {
+                drive = Drive.Create(null, MountedPath);
+                env = new DumpEnvironment(Options,
+                    FilePath,
+                    drive,
+                    System,
+                    internalProgram: null);
+                env.SetExecutionContext(MediaType, null);
+                env.SetProcessor();
+            }
+
+            // Finally, attempt to do the output dance
+            var verifyResult = env.VerifyAndSaveDumpOutput()
+                .ConfigureAwait(false).GetAwaiter().GetResult();
+            Console.WriteLine(verifyResult.Message);
+
+            return true;
+        }
+
+        /// <summary>
+        /// Display help for MPF.CLI
+        /// </summary>
+        /// <param name="error">Error string to prefix the help text with</param>
+        public static void DisplayHelp()
+        {
+            Console.WriteLine("Usage:");
+            Console.WriteLine("MPF.CLI <system> [options]");
+            Console.WriteLine();
+            Console.WriteLine("Standalone Options:");
+            Console.WriteLine("?, h, help              Show this help text");
+            Console.WriteLine("version                 Print the program version");
+            Console.WriteLine("lc, listcodes           List supported comment/content site codes");
+            Console.WriteLine("lm, listmedia           List supported media types");
+            Console.WriteLine("ls, listsystems         List supported system types");
+            Console.WriteLine("lp, listprograms        List supported dumping program outputs");
+            Console.WriteLine("i, interactive          Enable interactive mode");
+            Console.WriteLine();
+
+            Console.WriteLine("CLI Options:");
+            Console.WriteLine("-u, --use <program>            Override configured dumping program name");
+            Console.WriteLine("-t, --mediatype <mediatype>    Set media type for dumping (Required for DIC)");
+            Console.WriteLine("-d, --device <devicepath>      Physical drive path (Required if no custom parameters set)");
+            Console.WriteLine("-m, --mounted <dirpath>        Mounted filesystem path for additional checks");
+            Console.WriteLine("-f, --file \"<filepath>\"        Output file path (Required if no custom parameters set)");
+            Console.WriteLine("-s, --speed <speed>            Override default dumping speed");
+            Console.WriteLine("-c, --custom \"<params>\"        Custom parameters to use");
+            Console.WriteLine();
+
+            Console.WriteLine("Dumping program paths and other settings can be found in the config.json file");
+            Console.WriteLine("generated next to the program by default. Ensure that all settings are to user");
+            Console.WriteLine("preference before running MPF.CLI.");
+            Console.WriteLine();
+
+            Console.WriteLine("Custom dumping parameters, if used, will fully replace the default parameters.");
+            Console.WriteLine("All dumping parameters need to be supplied if doing this.");
+            Console.WriteLine("Otherwise, both a drive path and output file path are required.");
+            Console.WriteLine();
+
+            Console.WriteLine("Mounted filesystem path is only recommended on OSes that require block");
+            Console.WriteLine("device dumping, usually Linux and macOS.");
+            Console.WriteLine();
+        }
+    }
+}

MPF.CLI/Features/InteractiveFeature.cs

@@ -0,0 +1,190 @@
+
+using System;
+using System.IO;
+using MPF.Frontend;
+using MPF.Frontend.Tools;
+using SabreTools.RedumpLib.Data;
+
+namespace MPF.CLI.Features
+{
+    internal sealed class InteractiveFeature : BaseFeature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "interactive";
+
+        private static readonly string[] _flags = ["i", "interactive"];
+
+        private const string _description = "Enable interactive mode";
+
+        #endregion
+
+        public InteractiveFeature()
+            : base(DisplayName, _flags, _description)
+        {
+        }
+
+        /// <inheritdoc/>
+        public override bool ProcessArgs(string[] args, int index)
+        {
+            // Cache all args as inputs
+            for (int i = 1; i < args.Length; i++)
+            {
+                Inputs.Add(args[i]);
+            }
+
+            // Read the options from config, if possible
+            Options = OptionsLoader.LoadFromConfig();
+
+            // Create return values
+            MediaType = SabreTools.RedumpLib.Data.MediaType.NONE;
+            FilePath = Path.Combine(Options.DefaultOutputPath ?? "ISO", "track.bin");
+            System = Options.DefaultSystem;
+
+            // Create state values
+            string? result = string.Empty;
+
+        root:
+            Console.Clear();
+            Console.WriteLine("MPF.CLI Interactive Mode - Main Menu");
+            Console.WriteLine("-------------------------");
+            Console.WriteLine();
+            Console.WriteLine($"1) Set system (Currently '{System}')");
+            Console.WriteLine($"2) Set dumping program (Currently '{Options.InternalProgram}')");
+            Console.WriteLine($"3) Set media type (Currently '{MediaType}')");
+            Console.WriteLine($"4) Set device path (Currently '{DevicePath}')");
+            Console.WriteLine($"5) Set mounted path (Currently '{MountedPath}')");
+            Console.WriteLine($"6) Set file path (Currently '{FilePath}')");
+            Console.WriteLine($"7) Set override speed (Currently '{DriveSpeed}')");
+            Console.WriteLine($"8) Set custom parameters (Currently '{CustomParams}')");
+            Console.WriteLine();
+            Console.WriteLine($"Q) Exit the program");
+            Console.WriteLine($"X) Start dumping");
+            Console.Write("> ");
+
+            result = Console.ReadLine();
+            switch (result)
+            {
+                case "1":
+                    goto system;
+                case "2":
+                    goto dumpingProgram;
+                case "3":
+                    goto mediaType;
+                case "4":
+                    goto devicePath;
+                case "5":
+                    goto mountedPath;
+                case "6":
+                    goto filePath;
+                case "7":
+                    goto overrideSpeed;
+                case "8":
+                    goto customParams;
+
+                case "q":
+                case "Q":
+                    Environment.Exit(0);
+                    break;
+                case "x":
+                case "X":
+                    Console.Clear();
+                    goto exit;
+                case "z":
+                case "Z":
+                    Console.WriteLine("It is pitch black. You are likely to be eaten by a grue.");
+                    Console.Write("> ");
+                    Console.ReadLine();
+                    goto root;
+                default:
+                    Console.WriteLine($"Invalid selection: {result}");
+                    Console.ReadLine();
+                    goto root;
+            }
+
+        system:
+            Console.WriteLine();
+            Console.WriteLine("For possible inputs, use the List Systems commandline option");
+            Console.WriteLine();
+            Console.WriteLine("Input the system and press Enter:");
+            Console.Write("> ");
+            result = Console.ReadLine();
+            System = result.ToRedumpSystem();
+            goto root;
+
+        dumpingProgram:
+            Console.WriteLine();
+            Console.WriteLine("Options:");
+            Console.WriteLine($"{InternalProgram.Redumper.ToString().ToLowerInvariant().PadRight(15)} => {InternalProgram.Redumper.LongName()}");
+            Console.WriteLine($"{InternalProgram.DiscImageCreator.ToString().ToLowerInvariant().PadRight(15)} => {InternalProgram.DiscImageCreator.LongName()}");
+            Console.WriteLine($"{InternalProgram.Aaru.ToString().ToLowerInvariant().PadRight(15)} => {InternalProgram.Aaru.LongName()}");
+            Console.WriteLine();
+            Console.WriteLine("Input the dumping program and press Enter:");
+            Console.Write("> ");
+            result = Console.ReadLine();
+            Options.InternalProgram = result.ToInternalProgram();
+            goto root;
+
+        mediaType:
+            Console.WriteLine();
+            Console.WriteLine("For possible inputs, use the List Media commandline option");
+            Console.WriteLine();
+            Console.WriteLine("Input the media type and press Enter:");
+            Console.Write("> ");
+            result = Console.ReadLine();
+            MediaType = OptionsLoader.ToMediaType(result);
+            goto root;
+
+        devicePath:
+            Console.WriteLine();
+            Console.WriteLine("Input the device path and press Enter:");
+            Console.Write("> ");
+            DevicePath = Console.ReadLine();
+            goto root;
+
+        mountedPath:
+            Console.WriteLine();
+            Console.WriteLine("Input the mounted path and press Enter:");
+            Console.Write("> ");
+            MountedPath = Console.ReadLine();
+            goto root;
+
+        filePath:
+            Console.WriteLine();
+            Console.WriteLine("Input the file path and press Enter:");
+            Console.Write("> ");
+
+            result = Console.ReadLine();
+            if (!string.IsNullOrEmpty(result))
+                result = Path.GetFullPath(result!);
+
+            FilePath = result;
+            goto root;
+
+        overrideSpeed:
+            Console.WriteLine();
+            Console.WriteLine("Input the override speed and press Enter:");
+            Console.Write("> ");
+
+            result = Console.ReadLine();
+            if (!int.TryParse(result, out int speed))
+                speed = -1;
+
+            DriveSpeed = speed;
+            goto root;
+
+        customParams:
+            Console.WriteLine();
+            Console.WriteLine("Input the custom parameters and press Enter:");
+            Console.Write("> ");
+            CustomParams = Console.ReadLine();
+            goto root;
+
+        exit:
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => true;
+    }
+}

MPF.CLI/Features/MainFeature.cs

@@ -0,0 +1,115 @@
+
+using MPF.Frontend;
+using MPF.Frontend.Tools;
+using SabreTools.CommandLine.Inputs;
+using SabreTools.RedumpLib.Data;
+
+namespace MPF.CLI.Features
+{
+    internal sealed class MainFeature : BaseFeature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "main";
+
+        /// <remarks>Flags are unused</remarks>
+        private static readonly string[] _flags = [];
+
+        /// <remarks>Description is unused</remarks>
+        private const string _description = "";
+
+        #endregion
+
+        #region Inputs
+
+        private const string _customName = "custom";
+        internal readonly StringInput CustomInput = new(_customName, ["-c", "--custom"], "Custom parameters to use");
+
+        private const string _deviceName = "device";
+        internal readonly StringInput DeviceInput = new(_deviceName, ["-d", "--device"], "Physical drive path (Required if no custom parameters set)");
+
+        private const string _fileName = "file";
+        internal readonly StringInput FileInput = new(_fileName, ["-f", "--file"], "Output file path (Required if no custom parameters set)");
+
+        private const string _mediaTypeName = "media-type";
+        internal readonly StringInput MediaTypeInput = new(_mediaTypeName, ["-t", "--mediatype"], "Set media type for dumping (Required for DIC)");
+
+        private const string _mountedName = "mounted";
+        internal readonly StringInput MountedInput = new(_mountedName, ["-m", "--mounted"], "Mounted filesystem path for additional checks");
+
+        private const string _speedName = "speed";
+        internal readonly Int32Input SpeedInput = new(_speedName, ["-s", "--speed"], "Override default dumping speed");
+
+        private const string _useName = "use";
+        internal readonly StringInput UseInput = new(_useName, ["-u", "--use"], "Override configured dumping program name");
+
+        #endregion
+
+        public MainFeature()
+            : base(DisplayName, _flags, _description)
+        {
+            Add(UseInput);
+            Add(MediaTypeInput);
+            Add(DeviceInput);
+            Add(MountedInput);
+            Add(FileInput);
+            Add(SpeedInput);
+            Add(CustomInput);
+        }
+
+        /// <inheritdoc/>
+        public override bool ProcessArgs(string[] args, int index)
+        {
+            // If we have no arguments, just return
+            if (args == null || args.Length == 0)
+                return true;
+
+            // Read the options from config, if possible
+            Options = OptionsLoader.LoadFromConfig();
+
+            // The first argument is the system type
+            System = args[0].Trim('"').ToRedumpSystem();
+
+            // Loop through the arguments and parse out values
+            for (index = 1; index < args.Length; index++)
+            {
+                // Use specific program
+                if (UseInput.ProcessInput(args, ref index))
+                    Options.InternalProgram = UseInput.Value.ToInternalProgram();
+
+                // Set a media type
+                else if (MediaTypeInput.ProcessInput(args, ref index))
+                    MediaType = OptionsLoader.ToMediaType(MediaTypeInput.Value?.Trim('"'));
+
+                // Use a device path
+                else if (DeviceInput.ProcessInput(args, ref index))
+                    DevicePath = DeviceInput.Value;
+
+                // Use a mounted path for physical checks
+                else if (MountedInput.ProcessInput(args, ref index))
+                    MountedPath = MountedInput.Value;
+
+                // Use a file path
+                else if (FileInput.ProcessInput(args, ref index))
+                    FilePath = FileInput.Value;
+
+                // Set an override speed
+                else if (SpeedInput.ProcessInput(args, ref index))
+                    DriveSpeed = SpeedInput.Value;
+
+                // Use a custom parameters
+                else if (CustomInput.ProcessInput(args, ref index))
+                    CustomParams = CustomInput.Value;
+
+                // Default, add to inputs
+                else
+                    Inputs.Add(args[index]);
+            }
+
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => true;
+    }
+}

MPF.CLI/MPF.CLI.csproj

@@ -12,7 +12,7 @@
         <Nullable>enable</Nullable>
         <SuppressTfmSupportBuildWarnings>true</SuppressTfmSupportBuildWarnings>
         <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
-        <VersionPrefix>3.3.3</VersionPrefix>
+        <VersionPrefix>3.5.0</VersionPrefix>
 
         <!-- Package Properties -->
         <Title>MPF CLI</Title>
@@ -43,7 +43,8 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="SabreTools.CommandLine" Version="[1.3.2]" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
     </ItemGroup>
 
 </Project>

MPF.CLI/Program.cs

@@ -1,12 +1,14 @@
 using System;
-using System.IO;
+using System.Collections.Generic;
 #if NET40
 using System.Threading.Tasks;
 #endif
+using MPF.CLI.Features;
 using MPF.Frontend;
+using MPF.Frontend.Features;
 using MPF.Frontend.Tools;
-using SabreTools.RedumpLib.Data;
-using SabreTools.RedumpLib.Web;
+using SabreTools.CommandLine;
+using SabreTools.CommandLine.Features;
 
 namespace MPF.CLI
 {
@@ -29,492 +31,117 @@ namespace MPF.CLI
                 OptionsLoader.SaveToConfig(options);
 
                 // Display non-error message
-                DisplayHelp("First-run detected! Please fill out config.json and run again.");
+                Console.WriteLine("First-run detected! Please fill out config.json and run again.");
+                BaseFeature.DisplayHelp();
                 return;
             }
 
-            // Try processing the standalone arguments
-            bool? standaloneProcessed = OptionsLoader.ProcessStandaloneArguments(args);
-            if (standaloneProcessed != false)
-            {
-                if (standaloneProcessed == null)
-                    DisplayHelp();
-                return;
-            }
+            // Create the command set
+            var mainFeature = new MainFeature();
+            var commandSet = CreateCommands(mainFeature);
 
-            // Setup common outputs
-            CommandOptions opts;
-            MediaType mediaType;
-            RedumpSystem? knownSystem;
-
-            // Use interactive mode
-            if (args.Length > 0 && (args[0] == "-i" || args[0] == "--interactive"))
-            {
-                opts = InteractiveMode(options, out mediaType, out knownSystem);
-            }
-
-            // Use normal commandline parameters
-            else
-            {
-                // Try processing the common arguments
-                bool success = OptionsLoader.ProcessCommonArguments(args, out mediaType, out knownSystem, out var error);
-                if (!success)
-                {
-                    DisplayHelp(error);
-                    return;
-                }
-
-                // Validate the supplied credentials
-                if (options.RetrieveMatchInformation
-                    && !string.IsNullOrEmpty(options.RedumpUsername)
-                    && !string.IsNullOrEmpty(options.RedumpPassword))
-                {
-                    bool? validated = RedumpClient.ValidateCredentials(options.RedumpUsername!, options.RedumpPassword!).GetAwaiter().GetResult();
-                    string message = validated switch
-                    {
-                        true => "Redump username and password accepted!",
-                        false => "Redump username and password denied!",
-                        null => "An error occurred validating your credentials!",
-                    };
-
-                    Console.WriteLine(message);
-                }
-
-                // Process any custom parameters
-                int startIndex = 2;
-                opts = LoadFromArguments(args, options, ref startIndex);
-            }
-
-            // Validate the internal program
-            switch (options.InternalProgram)
-            {
-                case InternalProgram.Aaru:
-                    if (!File.Exists(options.AaruPath))
-                    {
-                        DisplayHelp("A path needs to be supplied in config.json for Aaru, exiting...");
-                        return;
-                    }
-                    break;
-
-                case InternalProgram.DiscImageCreator:
-                    if (!File.Exists(options.DiscImageCreatorPath))
-                    {
-                        DisplayHelp("A path needs to be supplied in config.json for DIC, exiting...");
-                        return;
-                    }
-                    break;
-
-                case InternalProgram.Redumper:
-                    if (!File.Exists(options.RedumperPath))
-                    {
-                        DisplayHelp("A path needs to be supplied in config.json for Redumper, exiting...");
-                        return;
-                    }
-                    break;
-
-                default:
-                    DisplayHelp($"{options.InternalProgram} is not a supported dumping program, exiting...");
-                    break;
-            }
-
-            // Ensure we have the values we need
-            if (opts.CustomParams == null && (opts.DevicePath == null || opts.FilePath == null))
-            {
-                DisplayHelp("Both a device path and file path need to be supplied, exiting...");
-                return;
-            }
-
-            // Normalize the file path
-            if (opts.FilePath != null)
-                opts.FilePath = FrontendTool.NormalizeOutputPaths(opts.FilePath, getFullPath: true);
-
-            // Get the speed from the options
-            int speed = opts.DriveSpeed ?? FrontendTool.GetDefaultSpeedForMediaType(mediaType, options);
-
-            // Populate an environment
-            var drive = Drive.Create(null, opts.DevicePath ?? string.Empty);
-            var env = new DumpEnvironment(options,
-                opts.FilePath,
-                drive,
-                knownSystem,
-                options.InternalProgram);
-            env.SetExecutionContext(mediaType, null);
-            env.SetProcessor();
-
-            // Process the parameters
-            string? paramStr = opts.CustomParams ?? env.GetFullParameters(mediaType, speed);
-            if (string.IsNullOrEmpty(paramStr))
-            {
-                DisplayHelp("No valid environment could be created, exiting...");
-                return;
-            }
-
-            env.SetExecutionContext(mediaType, paramStr);
-
-            // Invoke the dumping program
-            Console.WriteLine($"Invoking {options.InternalProgram} using '{paramStr}'");
-            var dumpResult = env.Run(mediaType).GetAwaiter().GetResult();
-            Console.WriteLine(dumpResult.Message);
-            if (!dumpResult)
-                return;
-
-            // If it was not a dumping command
-            if (!env.IsDumpingCommand())
-            {
-                Console.WriteLine("Execution not recognized as dumping command, skipping processing...");
-                return;
-            }
-
-            // If we have a mounted path, replace the environment
-            if (opts.MountedPath != null && Directory.Exists(opts.MountedPath))
-            {
-                drive = Drive.Create(null, opts.MountedPath);
-                env = new DumpEnvironment(options,
-                    opts.FilePath,
-                    drive,
-                    knownSystem,
-                    internalProgram: null);
-                env.SetExecutionContext(mediaType, null);
-                env.SetProcessor();
-            }
-
-            // Finally, attempt to do the output dance
-            var verifyResult = env.VerifyAndSaveDumpOutput(mediaType: mediaType)
-                .ConfigureAwait(false).GetAwaiter().GetResult();
-            Console.WriteLine(verifyResult.Message);
-        }
-
-        /// <summary>
-        /// Display help for MPF.CLI
-        /// </summary>
-        /// <param name="error">Error string to prefix the help text with</param>
-        private static void DisplayHelp(string? error = null)
-        {
-            if (error != null)
-                Console.WriteLine(error);
-
-            Console.WriteLine("Usage:");
-            Console.WriteLine("MPF.CLI <mediatype> <system> [options]");
-            Console.WriteLine();
-            Console.WriteLine("Standalone Options:");
-            Console.WriteLine("-h, -?, --help          Show this help text");
-            Console.WriteLine("--version               Print the program version");
-            Console.WriteLine("-lc, --listcodes        List supported comment/content site codes");
-            Console.WriteLine("-lm, --listmedia        List supported media types");
-            Console.WriteLine("-ls, --listsystems      List supported system types");
-            Console.WriteLine("-lp, --listprograms     List supported dumping program outputs");
-            Console.WriteLine("-i, --interactive       Enable interactive mode");
-            Console.WriteLine();
-
-            Console.WriteLine("CLI Options:");
-            Console.WriteLine("-u, --use <program>            Override configured dumping program name");
-            Console.WriteLine("-d, --device <devicepath>      Physical drive path (Required if no custom parameters set)");
-            Console.WriteLine("-m, --mounted <dirpath>        Mounted filesystem path for additional checks");
-            Console.WriteLine("-f, --file \"<filepath>\"        Output file path (Required if no custom parameters set)");
-            Console.WriteLine("-s, --speed <speed>            Override default dumping speed");
-            Console.WriteLine("-c, --custom \"<params>\"        Custom parameters to use");
-            Console.WriteLine();
-
-            Console.WriteLine("Dumping program paths and other settings can be found in the config.json file");
-            Console.WriteLine("generated next to the program by default. Ensure that all settings are to user");
-            Console.WriteLine("preference before running MPF.CLI.");
-            Console.WriteLine();
-
-            Console.WriteLine("Custom dumping parameters, if used, will fully replace the default parameters.");
-            Console.WriteLine("All dumping parameters need to be supplied if doing this.");
-            Console.WriteLine("Otherwise, both a drive path and output file path are required.");
-            Console.WriteLine();
-
-            Console.WriteLine("Mounted filesystem path is only recommended on OSes that require block");
-            Console.WriteLine("device dumping, usually Linux and macOS.");
-            Console.WriteLine();
-        }
-
-        /// <summary>
-        /// Enable interactive mode for entering information
-        /// </summary>
-        private static CommandOptions InteractiveMode(Options options, out MediaType mediaType, out RedumpSystem? system)
-        {
-            // Create return values
-            var opts = new CommandOptions
-            {
-                FilePath = Path.Combine(options.DefaultOutputPath ?? "ISO", "track.bin"),
-            };
-            mediaType = MediaType.NONE;
-            system = options.DefaultSystem;
-
-            // Create state values
-            string? result = string.Empty;
-
-        root:
-            Console.Clear();
-            Console.WriteLine("MPF.CLI Interactive Mode - Main Menu");
-            Console.WriteLine("-------------------------");
-            Console.WriteLine();
-            Console.WriteLine($"1) Set media type (Currently '{mediaType}')");
-            Console.WriteLine($"2) Set system (Currently '{system}')");
-            Console.WriteLine($"3) Set dumping program (Currently '{options.InternalProgram}')");
-            Console.WriteLine($"4) Set device path (Currently '{opts.DevicePath}')");
-            Console.WriteLine($"5) Set mounted path (Currently '{opts.MountedPath}')");
-            Console.WriteLine($"6) Set file path (Currently '{opts.FilePath}')");
-            Console.WriteLine($"7) Set override speed (Currently '{opts.DriveSpeed}')");
-            Console.WriteLine($"8) Set custom parameters (Currently '{opts.CustomParams}')");
-            Console.WriteLine();
-            Console.WriteLine($"Q) Exit the program");
-            Console.WriteLine($"X) Start dumping");
-            Console.Write("> ");
-
-            result = Console.ReadLine();
-            switch (result)
-            {
-                case "1":
-                    goto mediaType;
-                case "2":
-                    goto system;
-                case "3":
-                    goto dumpingProgram;
-                case "4":
-                    goto devicePath;
-                case "5":
-                    goto mountedPath;
-                case "6":
-                    goto filePath;
-                case "7":
-                    goto overrideSpeed;
-                case "8":
-                    goto customParams;
-
-                case "q":
-                case "Q":
-                    Environment.Exit(0);
-                    break;
-                case "x":
-                case "X":
-                    Console.Clear();
-                    goto exit;
-                case "z":
-                case "Z":
-                    Console.WriteLine("It is pitch black. You are likely to be eaten by a grue.");
-                    Console.Write("> ");
-                    Console.ReadLine();
-                    goto root;
-                default:
-                    Console.WriteLine($"Invalid selection: {result}");
-                    Console.ReadLine();
-                    goto root;
-            }
-
-        mediaType:
-            Console.WriteLine();
-            Console.WriteLine("Input the media type and press Enter:");
-            Console.Write("> ");
-            result = Console.ReadLine();
-            mediaType = OptionsLoader.ToMediaType(result);
-            goto root;
-
-        system:
-            Console.WriteLine();
-            Console.WriteLine("Input the system and press Enter:");
-            Console.Write("> ");
-            result = Console.ReadLine();
-            system = Extensions.ToRedumpSystem(result);
-            goto root;
-
-        dumpingProgram:
-            Console.WriteLine();
-            Console.WriteLine("Input the dumping program and press Enter:");
-            Console.Write("> ");
-            result = Console.ReadLine();
-            options.InternalProgram = result.ToInternalProgram();
-            goto root;
-
-        devicePath:
-            Console.WriteLine();
-            Console.WriteLine("Input the device path and press Enter:");
-            Console.Write("> ");
-            opts.DevicePath = Console.ReadLine();
-            goto root;
-
-        mountedPath:
-            Console.WriteLine();
-            Console.WriteLine("Input the mounted path and press Enter:");
-            Console.Write("> ");
-            opts.MountedPath = Console.ReadLine();
-            goto root;
-
-        filePath:
-            Console.WriteLine();
-            Console.WriteLine("Input the file path and press Enter:");
-            Console.Write("> ");
-
-            result = Console.ReadLine();
-            if (!string.IsNullOrEmpty(result))
-                result = Path.GetFullPath(result!);
-
-            opts.FilePath = result;
-            goto root;
-
-        overrideSpeed:
-            Console.WriteLine();
-            Console.WriteLine("Input the override speed and press Enter:");
-            Console.Write("> ");
-
-            result = Console.ReadLine();
-            if (!int.TryParse(result, out int speed))
-                speed = -1;
-
-            opts.DriveSpeed = speed;
-            goto root;
-
-        customParams:
-            Console.WriteLine();
-            Console.WriteLine("Input the custom parameters and press Enter:");
-            Console.Write("> ");
-            opts.CustomParams = Console.ReadLine();
-            goto root;
-
-        exit:
-            return opts;
-        }
-
-        /// <summary>
-        /// Load the current set of options from application arguments
-        /// </summary>
-        private static CommandOptions LoadFromArguments(string[] args, Options options, ref int startIndex)
-        {
-            // Create return values
-            var opts = new CommandOptions();
-
-            // If we have no arguments, just return
+            // If we have no args, show the help and quit
             if (args == null || args.Length == 0)
             {
-                startIndex = 0;
-                return opts;
+                BaseFeature.DisplayHelp();
+                return;
             }
 
-            // If we have an invalid start index, just return
-            if (startIndex < 0 || startIndex >= args.Length)
-                return opts;
+            // Get the first argument as a feature flag
+            string featureName = args[0];
 
-            // Loop through the arguments and parse out values
-            for (; startIndex < args.Length; startIndex++)
+            // Try processing the standalone arguments
+            var topLevel = commandSet.GetTopLevel(featureName);
+            switch (topLevel)
             {
-                // Use specific program
-                if (args[startIndex].StartsWith("-u=") || args[startIndex].StartsWith("--use="))
-                {
-                    string internalProgram = args[startIndex].Split('=')[1];
-                    options.InternalProgram = internalProgram.ToInternalProgram();
-                }
-                else if (args[startIndex] == "-u" || args[startIndex] == "--use")
-                {
-                    string internalProgram = args[startIndex + 1];
-                    options.InternalProgram = internalProgram.ToInternalProgram();
-                    startIndex++;
-                }
+                // Standalone Options
+                case Help: BaseFeature.DisplayHelp(); return;
+                case VersionFeature version: version.Execute(); return;
+                case ListCodesFeature lc: lc.Execute(); return;
+                case ListMediaTypesFeature lm: lm.Execute(); return;
+                case ListProgramsFeature lp: lp.Execute(); return;
+                case ListSystemsFeature ls: ls.Execute(); return;
 
-                // Use a device path
-                else if (args[startIndex].StartsWith("-d=") || args[startIndex].StartsWith("--device="))
-                {
-                    opts.DevicePath = args[startIndex].Split('=')[1].Trim('"');
-                }
-                else if (args[startIndex] == "-d" || args[startIndex] == "--device")
-                {
-                    opts.DevicePath = args[startIndex + 1].Trim('"');
-                    startIndex++;
-                }
+                // Interactive Mode
+                case InteractiveFeature interactive:
+                    if (!interactive.ProcessArgs(args, 0))
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+                    if (!interactive.Execute())
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
 
-                // Use a mounted path for physical checks
-                else if (args[startIndex].StartsWith("-m=") || args[startIndex].StartsWith("--mounted="))
-                {
-                    opts.MountedPath = args[startIndex].Split('=')[1];
-                }
-                else if (args[startIndex] == "-m" || args[startIndex] == "--mounted")
-                {
-                    opts.MountedPath = args[startIndex + 1];
-                    startIndex++;
-                }
-
-                // Use a file path
-                else if (args[startIndex].StartsWith("-f=") || args[startIndex].StartsWith("--file="))
-                {
-                    opts.FilePath = args[startIndex].Split('=')[1].Trim('"');
-                }
-                else if (args[startIndex] == "-f" || args[startIndex] == "--file")
-                {
-                    opts.FilePath = args[startIndex + 1].Trim('"');
-                    startIndex++;
-                }
-
-                // Set an override speed
-                else if (args[startIndex].StartsWith("-s=") || args[startIndex].StartsWith("--speed="))
-                {
-                    if (!int.TryParse(args[startIndex].Split('=')[1].Trim('"'), out int speed))
-                        speed = -1;
-
-                    opts.DriveSpeed = speed;
-                }
-                else if (args[startIndex] == "-s" || args[startIndex] == "--speed")
-                {
-                    if (!int.TryParse(args[startIndex + 1].Trim('"'), out int speed))
-                        speed = -1;
-
-                    opts.DriveSpeed = speed;
-                    startIndex++;
-                }
-
-                // Use a custom parameters
-                else if (args[startIndex].StartsWith("-c=") || args[startIndex].StartsWith("--custom="))
-                {
-                    opts.CustomParams = args[startIndex].Split('=')[1].Trim('"');
-                }
-                else if (args[startIndex] == "-c" || args[startIndex] == "--custom")
-                {
-                    opts.CustomParams = args[startIndex + 1].Trim('"');
-                    startIndex++;
-                }
-
-                // Default, we fall out
-                else
-                {
                     break;
-                }
-            }
 
-            return opts;
+                // Default Behavior
+                default:
+                    if (!mainFeature.ProcessArgs(args, 0))
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+                    if (!mainFeature.Execute())
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+
+                    break;
+            }
         }
 
         /// <summary>
-        /// Represents commandline options
+        /// Create the command set for the program
         /// </summary>
-        private class CommandOptions
+        private static CommandSet CreateCommands(MainFeature mainFeature)
         {
-            /// <summary>
-            /// Path to the device to dump
-            /// </summary>
-            /// <remarks>Required if custom parameters are not set</remarks>
-            public string? DevicePath { get; set; } = null;
+            List<string> header = [
+                "MPF.CLI [standalone|system] [options] <path> ...",
+                string.Empty,
+            ];
 
-            /// <summary>
-            /// Path to the mounted filesystem to check
-            /// </summary>
-            /// <remarks>Should only be used when the device path is not readable</remarks>
-            public string? MountedPath { get; set; } = null;
+            List<string> footer = [
+                string.Empty,
+                "Dumping program paths and other settings can be found in the config.json file",
+                "generated next to the program by default. Ensure that all settings are to user",
+                "preference before running MPF.CLI.",
+                string.Empty,
 
-            /// <summary>
-            /// Path to the output file
-            /// </summary>
-            /// <remarks>Required if custom parameters are not set</remarks>
-            public string? FilePath { get; set; } = null;
+                "Custom dumping parameters, if used, will fully replace the default parameters.",
+                "All dumping parameters need to be supplied if doing this.",
+                "Otherwise, both a drive path and output file path are required.",
+                string.Empty,
 
-            /// <summary>
-            /// Override drive speed
-            /// </summary>
-            public int? DriveSpeed { get; set; } = null;
+                "Mounted filesystem path is only recommended on OSes that require block",
+                "device dumping, usually Linux and macOS.",
+                string.Empty,
+            ];
 
-            /// <summary>
-            /// Custom parameters for dumping
-            /// </summary>
-            public string? CustomParams { get; set; } = null;
+            var commandSet = new CommandSet(header, footer);
+
+            // Standalone Options
+            commandSet.Add(new Help());
+            commandSet.Add(new VersionFeature());
+            commandSet.Add(new ListCodesFeature());
+            commandSet.Add(new ListMediaTypesFeature());
+            commandSet.Add(new ListSystemsFeature());
+            commandSet.Add(new ListProgramsFeature());
+            commandSet.Add(new InteractiveFeature());
+
+            // CLI Options
+            commandSet.Add(mainFeature.UseInput);
+            commandSet.Add(mainFeature.MediaTypeInput);
+            commandSet.Add(mainFeature.DeviceInput);
+            commandSet.Add(mainFeature.MountedInput);
+            commandSet.Add(mainFeature.FileInput);
+            commandSet.Add(mainFeature.SpeedInput);
+            commandSet.Add(mainFeature.CustomInput);
+
+            return commandSet;
         }
     }
 }

MPF.Check/Features/BaseFeature.cs

@@ -0,0 +1,177 @@
+
+using System;
+using System.IO;
+#if NET40
+using System.Threading.Tasks;
+#endif
+using MPF.Frontend;
+using SabreTools.RedumpLib.Data;
+using SabreTools.RedumpLib.Web;
+using LogCompression = MPF.Processors.LogCompression;
+
+namespace MPF.Check.Features
+{
+    internal abstract class BaseFeature : SabreTools.CommandLine.Feature
+    {
+        #region Properties
+
+        /// <summary>
+        /// User-defined options
+        /// </summary>
+        public Options Options { get; protected set; }
+
+        /// <summary>
+        /// Currently-selected system
+        /// </summary>
+        public RedumpSystem? System { get; protected set; }
+
+        /// <summary>
+        /// Seed submission info from an input file
+        /// </summary>
+        public SubmissionInfo? Seed { get; protected set; }
+
+        /// <summary>
+        /// Path to the device to scan
+        /// </summary>
+        public string? DevicePath { get; protected set; }
+
+        #endregion
+
+        protected BaseFeature(string name, string[] flags, string description, string? detailed = null)
+            : base(name, flags, description, detailed)
+        {
+            Options = new Options()
+            {
+                // Internal Program
+                InternalProgram = InternalProgram.NONE,
+
+                // Extra Dumping Options
+                ScanForProtection = false,
+                AddPlaceholders = true,
+                PullAllInformation = false,
+                AddFilenameSuffix = false,
+                OutputSubmissionJSON = false,
+                IncludeArtifacts = false,
+                CompressLogFiles = false,
+                LogCompression = LogCompression.DeflateMaximum,
+                DeleteUnnecessaryFiles = false,
+                CreateIRDAfterDumping = false,
+
+                // Protection Scanning Options
+                ScanArchivesForProtection = true,
+                IncludeDebugProtectionInformation = false,
+                HideDriveLetters = false,
+
+                // Redump Login Information
+                RetrieveMatchInformation = true,
+                RedumpUsername = null,
+                RedumpPassword = null,
+            };
+        }
+
+        /// <inheritdoc/>
+        public override bool Execute()
+        {
+            if (Options.InternalProgram == InternalProgram.NONE)
+            {
+                Console.Error.WriteLine("A program name needs to be provided");
+                return false;
+            }
+
+            // Validate the supplied credentials
+            if (Options.RetrieveMatchInformation
+                && !string.IsNullOrEmpty(Options.RedumpUsername)
+                && !string.IsNullOrEmpty(Options.RedumpPassword))
+            {
+                bool? validated = RedumpClient.ValidateCredentials(Options.RedumpUsername!, Options.RedumpPassword!).GetAwaiter().GetResult();
+                string message = validated switch
+                {
+                    true => "Redump username and password accepted!",
+                    false => "Redump username and password denied!",
+                    null => "An error occurred validating your credentials!",
+                };
+
+                Console.WriteLine(message);
+            }
+
+            // Loop through all the rest of the args
+            for (int i = 0; i < Inputs.Count; i++)
+            {
+                // Check for a file
+                if (!File.Exists(Inputs[i].Trim('"')))
+                {
+                    Console.Error.WriteLine($"{Inputs[i].Trim('"')} does not exist");
+                    return false;
+                }
+
+                // Get the full file path
+                string filepath = Path.GetFullPath(Inputs[i].Trim('"'));
+
+                // Now populate an environment
+                Drive? drive = null;
+                if (!string.IsNullOrEmpty(DevicePath))
+                    drive = Drive.Create(null, DevicePath!);
+
+                var env = new DumpEnvironment(Options,
+                    filepath,
+                    drive,
+                    System,
+                    internalProgram: null);
+                env.SetProcessor();
+
+                // Finally, attempt to do the output dance
+                var result = env.VerifyAndSaveDumpOutput(seedInfo: Seed)
+                    .ConfigureAwait(false).GetAwaiter().GetResult();
+                Console.WriteLine(result.Message);
+            }
+
+            return true;
+        }
+
+        /// <summary>
+        /// Display help for MPF.Check
+        /// </summary>
+        /// <param name="error">Error string to prefix the help text with</param>
+        public static void DisplayHelp()
+        {
+            Console.WriteLine("Usage:");
+            Console.WriteLine("MPF.Check <system> [options] </path/to/output.cue/iso> ...");
+            Console.WriteLine();
+            Console.WriteLine("Standalone Options:");
+            Console.WriteLine("?, h, help              Show this help text");
+            Console.WriteLine("version                 Print the program version");
+            Console.WriteLine("lc, listcodes           List supported comment/content site codes");
+            Console.WriteLine("lm, listmedia           List supported media types");
+            Console.WriteLine("ls, listsystems         List supported system types");
+            Console.WriteLine("lp, listprograms        List supported dumping program outputs");
+            Console.WriteLine("i, interactive          Enable interactive mode");
+            Console.WriteLine();
+
+            Console.WriteLine("Check Options:");
+            Console.WriteLine("-u, --use <program>            Dumping program output type [REQUIRED]");
+            Console.WriteLine("    --load-seed <path>         Load a seed submission JSON for user information");
+            Console.WriteLine("    --no-placeholders          Disable placeholder values in submission info");
+            Console.WriteLine("    --create-ird               Create IRD from output files (PS3 only)");
+            Console.WriteLine("    --no-retrieve              Disable retrieving match information from Redump");
+            Console.WriteLine("-c, --credentials <user> <pw>  Redump username and password (incompatible with --no-retrieve) [WILL BE REMOVED]");
+            Console.WriteLine("-U, --username <user>          Redump username (incompatible with --no-retrieve)");
+            Console.WriteLine("-P, --password <pw>            Redump password (incompatible with --no-retrieve)");
+            Console.WriteLine("    --pull-all                 Pull all information from Redump (requires --username and --password)");
+            Console.WriteLine("-p, --path <drivepath>         Physical drive path for additional checks");
+            Console.WriteLine("-s, --scan                     Enable copy protection scan (requires --path)");
+            Console.WriteLine("    --disable-archives         Disable scanning archives (requires --scan)");
+            Console.WriteLine("    --enable-debug             Enable debug protection information (requires --scan)");
+            Console.WriteLine("    --hide-drive-letters       Hide drive letters from scan output (requires --scan)");
+            Console.WriteLine("-x, --suffix                   Enable adding filename suffix");
+            Console.WriteLine("-j, --json                     Enable submission JSON output");
+            Console.WriteLine("    --include-artifacts        Include artifacts in JSON (requires --json)");
+            Console.WriteLine("-z, --zip                      Enable log file compression");
+            Console.WriteLine("    --log-compression          Set the log compression type (requires --zip)");
+            Console.WriteLine("-d, --delete                   Enable unnecessary file deletion");
+            Console.WriteLine();
+            Console.WriteLine("WARNING: Check will overwrite both any existing submission information files as well");
+            Console.WriteLine("as any log archives. Please make backups of those if you need to before running Check.");
+            Console.WriteLine();
+        }
+    }
+}

MPF.Check/Features/InteractiveFeature.cs

@@ -0,0 +1,288 @@
+
+using System;
+using MPF.Frontend;
+using MPF.Frontend.Tools;
+using SabreTools.RedumpLib;
+using SabreTools.RedumpLib.Data;
+using LogCompression = MPF.Processors.LogCompression;
+
+namespace MPF.Check.Features
+{
+    internal sealed class InteractiveFeature : BaseFeature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "interactive";
+
+        private static readonly string[] _flags = ["i", "interactive"];
+
+        private const string _description = "Enable interactive mode";
+
+        #endregion
+
+        public InteractiveFeature()
+            : base(DisplayName, _flags, _description)
+        {
+        }
+
+        /// <inheritdoc/>
+        public override bool ProcessArgs(string[] args, int index)
+        {
+            // Cache all args as inputs
+            for (int i = 1; i < args.Length; i++)
+            {
+                Inputs.Add(args[i]);
+            }
+
+            // Read the options from config, if possible
+            Options = OptionsLoader.LoadFromConfig();
+            if (Options.FirstRun)
+            {
+                Options = new Options()
+                {
+                    // Internal Program
+                    InternalProgram = InternalProgram.NONE,
+
+                    // Extra Dumping Options
+                    ScanForProtection = false,
+                    AddPlaceholders = true,
+                    PullAllInformation = false,
+                    AddFilenameSuffix = false,
+                    OutputSubmissionJSON = false,
+                    IncludeArtifacts = false,
+                    CompressLogFiles = false,
+                    LogCompression = LogCompression.DeflateMaximum,
+                    DeleteUnnecessaryFiles = false,
+                    CreateIRDAfterDumping = false,
+
+                    // Protection Scanning Options
+                    ScanArchivesForProtection = true,
+                    IncludeDebugProtectionInformation = false,
+                    HideDriveLetters = false,
+
+                    // Redump Login Information
+                    RetrieveMatchInformation = true,
+                    RedumpUsername = null,
+                    RedumpPassword = null,
+                };
+            }
+
+            // Create return values
+            System = null;
+
+            // These values require multiple parts to be active
+            bool scan = false,
+                enableArchives = true,
+                enableDebug = false,
+                hideDriveLetters = false;
+
+            // Create state values
+            string? result = string.Empty;
+
+        root:
+            Console.Clear();
+            Console.WriteLine("MPF.Check Interactive Mode - Main Menu");
+            Console.WriteLine("-------------------------");
+            Console.WriteLine();
+            Console.WriteLine($"1) Set system (Currently '{System}')");
+            Console.WriteLine($"2) Set dumping program (Currently '{Options.InternalProgram}')");
+            Console.WriteLine($"3) Set seed path (Currently '{Seed}')");
+            Console.WriteLine($"4) Add placeholders (Currently '{Options.AddPlaceholders}')");
+            Console.WriteLine($"5) Create IRD (Currently '{Options.CreateIRDAfterDumping}')");
+            Console.WriteLine($"6) Attempt Redump matches (Currently '{Options.RetrieveMatchInformation}')");
+            Console.WriteLine($"7) Redump credentials (Currently '{Options.RedumpUsername}')");
+            Console.WriteLine($"8) Pull all information (Currently '{Options.PullAllInformation}')");
+            Console.WriteLine($"9) Set device path (Currently '{DevicePath}')");
+            Console.WriteLine($"A) Scan for protection (Currently '{scan}')");
+            Console.WriteLine($"B) Scan archives for protection (Currently '{enableArchives}')");
+            Console.WriteLine($"C) Debug protection scan output (Currently '{enableDebug}')");
+            Console.WriteLine($"D) Hide drive letters in protection output (Currently '{hideDriveLetters}')");
+            Console.WriteLine($"E) Hide filename suffix (Currently '{Options.AddFilenameSuffix}')");
+            Console.WriteLine($"F) Output submission JSON (Currently '{Options.OutputSubmissionJSON}')");
+            Console.WriteLine($"G) Include JSON artifacts (Currently '{Options.IncludeArtifacts}')");
+            Console.WriteLine($"H) Compress logs (Currently '{Options.CompressLogFiles}')");
+            Console.WriteLine($"I) Log compression (Currently '{Options.LogCompression.LongName()}')");
+            Console.WriteLine($"J) Delete unnecessary files (Currently '{Options.DeleteUnnecessaryFiles}')");
+            Console.WriteLine();
+            Console.WriteLine($"Q) Exit the program");
+            Console.WriteLine($"X) Start checking");
+            Console.Write("> ");
+
+            result = Console.ReadLine();
+            switch (result)
+            {
+                case "1":
+                    goto system;
+                case "2":
+                    goto dumpingProgram;
+                case "3":
+                    goto seedPath;
+                case "4":
+                    Options.AddPlaceholders = !Options.AddPlaceholders;
+                    goto root;
+                case "5":
+                    Options.CreateIRDAfterDumping = !Options.CreateIRDAfterDumping;
+                    goto root;
+                case "6":
+                    Options.RetrieveMatchInformation = !Options.RetrieveMatchInformation;
+                    goto root;
+                case "7":
+                    goto redumpCredentials;
+                case "8":
+                    Options.PullAllInformation = !Options.PullAllInformation;
+                    goto root;
+                case "9":
+                    goto devicePath;
+                case "a":
+                case "A":
+                    scan = !scan;
+                    goto root;
+                case "b":
+                case "B":
+                    enableArchives = !enableArchives;
+                    goto root;
+                case "c":
+                case "C":
+                    enableDebug = !enableDebug;
+                    goto root;
+                case "d":
+                case "D":
+                    hideDriveLetters = !hideDriveLetters;
+                    goto root;
+                case "e":
+                case "E":
+                    Options.AddFilenameSuffix = !Options.AddFilenameSuffix;
+                    goto root;
+                case "f":
+                case "F":
+                    Options.OutputSubmissionJSON = !Options.OutputSubmissionJSON;
+                    goto root;
+                case "g":
+                case "G":
+                    Options.IncludeArtifacts = !Options.IncludeArtifacts;
+                    goto root;
+                case "h":
+                case "H":
+                    Options.CompressLogFiles = !Options.CompressLogFiles;
+                    goto root;
+                case "i":
+                case "I":
+                    goto logCompression;
+                case "j":
+                case "J":
+                    Options.DeleteUnnecessaryFiles = !Options.DeleteUnnecessaryFiles;
+                    goto root;
+
+                case "q":
+                case "Q":
+                    Environment.Exit(0);
+                    break;
+                case "x":
+                case "X":
+                    Console.Clear();
+                    goto exit;
+                case "z":
+                case "Z":
+                    Console.WriteLine("It is pitch black. You are likely to be eaten by a grue.");
+                    Console.Write("> ");
+                    Console.ReadLine();
+                    goto root;
+                default:
+                    Console.WriteLine($"Invalid selection: {result}");
+                    Console.ReadLine();
+                    goto root;
+            }
+
+        system:
+            Console.WriteLine();
+            Console.WriteLine("For possible inputs, use the List Systems commandline option");
+            Console.WriteLine();
+            Console.WriteLine("Input the system and press Enter:");
+            Console.Write("> ");
+            result = Console.ReadLine();
+            System = result.ToRedumpSystem();
+            goto root;
+
+        dumpingProgram:
+            Console.WriteLine();
+            Console.WriteLine("Options:");
+            foreach (var program in (InternalProgram[])Enum.GetValues(typeof(InternalProgram)))
+            {
+                // Skip the placeholder values
+                if (program == InternalProgram.NONE)
+                    continue;
+
+                Console.WriteLine($"{program.ToString().ToLowerInvariant().PadRight(15)} => {program.LongName()}");
+            }
+
+            Console.WriteLine();
+            Console.WriteLine("Input the dumping program and press Enter:");
+            Console.Write("> ");
+            result = Console.ReadLine();
+            Options.InternalProgram = result.ToInternalProgram();
+            goto root;
+
+        seedPath:
+            Console.WriteLine();
+            Console.WriteLine("Input the seed path and press Enter:");
+            Console.Write("> ");
+            result = Console.ReadLine();
+            Seed = Builder.CreateFromFile(result);
+            goto root;
+
+        redumpCredentials:
+            Console.WriteLine();
+            Console.WriteLine("Enter your Redump username and press Enter:");
+            Console.Write("> ");
+            Options.RedumpUsername = Console.ReadLine();
+
+            Console.WriteLine("Enter your Redump password (hidden) and press Enter:");
+            Console.Write("> ");
+            Options.RedumpPassword = string.Empty;
+            while (true)
+            {
+                var key = Console.ReadKey(true);
+                if (key.Key == ConsoleKey.Enter)
+                    break;
+
+                Options.RedumpPassword += key.KeyChar;
+            }
+
+            goto root;
+
+        devicePath:
+            Console.WriteLine();
+            Console.WriteLine("Input the device path and press Enter:");
+            Console.Write("> ");
+            DevicePath = Console.ReadLine();
+            goto root;
+
+        logCompression:
+            Console.WriteLine();
+            Console.WriteLine("Options:");
+            foreach (var compressionType in (LogCompression[])Enum.GetValues(typeof(LogCompression)))
+            {
+                Console.WriteLine($"{compressionType.ToString().ToLowerInvariant().PadRight(15)} => {compressionType.LongName()}");
+            }
+
+            Console.WriteLine();
+            Console.WriteLine("Input the log compression type and press Enter:");
+            Console.Write("> ");
+            result = Console.ReadLine();
+            Options.LogCompression = result.ToLogCompression();
+            goto root;
+
+        exit:
+            // Now deal with the complex options
+            Options.ScanForProtection = scan && !string.IsNullOrEmpty(DevicePath);
+            Options.ScanArchivesForProtection = enableArchives && scan && !string.IsNullOrEmpty(DevicePath);
+            Options.IncludeDebugProtectionInformation = enableDebug && scan && !string.IsNullOrEmpty(DevicePath);
+            Options.HideDriveLetters = hideDriveLetters && scan && !string.IsNullOrEmpty(DevicePath);
+
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => Inputs.Count > 0;
+    }
+}

MPF.Check/Features/MainFeature.cs

@@ -0,0 +1,267 @@
+using MPF.Frontend;
+using MPF.Frontend.Tools;
+using SabreTools.CommandLine.Inputs;
+using SabreTools.RedumpLib;
+using SabreTools.RedumpLib.Data;
+using LogCompression = MPF.Processors.LogCompression;
+
+namespace MPF.Check.Features
+{
+    internal sealed class MainFeature : BaseFeature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "main";
+
+        /// <remarks>Flags are unused</remarks>
+        private static readonly string[] _flags = [];
+
+        /// <remarks>Description is unused</remarks>
+        private const string _description = "";
+
+        #endregion
+
+        #region Inputs
+
+        private const string _createIrdName = "create-ird";
+        internal readonly FlagInput CreateIrdInput = new(_createIrdName, "--create-ird", "Create IRD from output files (PS3 only)");
+
+        private const string _deleteName = "delete";
+        internal readonly FlagInput DeleteInput = new(_deleteName, ["-d", "--delete"], "Enable unnecessary file deletion");
+
+        private const string _disableArchivesName = "disable-archives";
+        internal readonly FlagInput DisableArchivesInput = new(_disableArchivesName, "--disable-archives", "Disable scanning archives (requires --scan)");
+
+        private const string _enableDebugName = "enable-debug";
+        internal readonly FlagInput EnableDebugInput = new(_enableDebugName, "--enable-debug", "Enable debug protection information (requires --scan)");
+
+        private const string _hideDriveLettersName = "hide-drive-letters";
+        internal readonly FlagInput HideDriveLettersInput = new(_hideDriveLettersName, "--hide-drive-letters", "Hide drive letters from scan output (requires --scan)");
+
+        private const string _includeArtifactsName = "include-artifacts";
+        internal readonly FlagInput IncludeArtifactsInput = new(_includeArtifactsName, "--include-artifacts", "Include artifacts in JSON (requires --json)");
+
+        private const string _jsonName = "json";
+        internal readonly FlagInput JsonInput = new(_jsonName, ["-j", "--json"], "Enable submission JSON output");
+
+        private const string _loadSeedName = "load-seed";
+        internal readonly StringInput LoadSeedInput = new(_loadSeedName, "--load-seed", "Load a seed submission JSON for user information");
+
+        private const string _logCompressionName = "log-compression";
+        internal readonly StringInput LogCompressionInput = new(_logCompressionName, "--log-compression", "Set the log compression type (requires --zip)");
+
+        private const string _noPlaceholdersName = "no-placeholders";
+        internal readonly FlagInput NoPlaceholdersInput = new(_noPlaceholdersName, "--no-placeholders", "Disable placeholder values in submission info");
+
+        private const string _noRetrieveName = "no-retrieve";
+        internal readonly FlagInput NoRetrieveInput = new(_noRetrieveName, "--no-retrieve", "Disable retrieving match information from Redump");
+
+        private const string _passwordName = "password";
+        internal readonly StringInput PasswordInput = new(_passwordName, ["-P", "--password"], "Redump password (incompatible with --no-retrieve)");
+
+        private const string _pathName = "path";
+        internal readonly StringInput PathInput = new(_pathName, ["-p", "--path"], "Physical drive path for additional checks");
+
+        private const string _pullAllName = "pull-all";
+        internal readonly FlagInput PullAllInput = new(_pullAllName, "--pull-all", "Pull all information from Redump (requires --username and --password)");
+
+        private const string _scanName = "scan";
+        internal readonly FlagInput ScanInput = new(_scanName, ["-s", "--scan"], "Enable copy protection scan (requires --path)");
+
+        private const string _suffixName = "suffix";
+        internal readonly FlagInput SuffixInput = new(_suffixName, ["-x", "--suffix"], "Enable adding filename suffix");
+
+        private const string _useName = "use";
+        internal readonly StringInput UseInput = new(_useName, ["-u", "--use"], "Override configured dumping program name");
+
+        private const string _usernameName = "username";
+        internal readonly StringInput UsernameInput = new(_usernameName, ["-U", "--username"], "Redump username (incompatible with --no-retrieve)");
+
+        private const string _zipName = "zip";
+        internal readonly FlagInput ZipInput = new(_zipName, ["-z", "--zip"], "Enable log file compression");
+
+        #endregion
+
+        public MainFeature()
+            : base(DisplayName, _flags, _description)
+        {
+            Add(UseInput);
+            Add(LoadSeedInput);
+            Add(NoPlaceholdersInput);
+            Add(CreateIrdInput);
+            Add(NoRetrieveInput);
+            // TODO: Figure out how to work with the credentials input
+            Add(PullAllInput);
+            Add(PathInput);
+            Add(ScanInput);
+            Add(DisableArchivesInput);
+            Add(EnableDebugInput);
+            Add(HideDriveLettersInput);
+            Add(SuffixInput);
+            Add(JsonInput);
+            Add(IncludeArtifactsInput);
+            Add(ZipInput);
+            Add(LogCompressionInput);
+            Add(DeleteInput);
+        }
+
+        /// <inheritdoc/>
+        public override bool ProcessArgs(string[] args, int index)
+        {
+            // These values require multiple parts to be active
+            bool scan = false,
+                enableArchives = true,
+                enableDebug = false,
+                hideDriveLetters = false;
+
+            // If we have no arguments, just return
+            if (args == null || args.Length == 0)
+                return true;
+
+            // Read the options from config, if possible
+            Options = OptionsLoader.LoadFromConfig();
+            if (Options.FirstRun)
+            {
+                Options = new Options()
+                {
+                    // Internal Program
+                    InternalProgram = InternalProgram.NONE,
+
+                    // Extra Dumping Options
+                    ScanForProtection = false,
+                    AddPlaceholders = true,
+                    PullAllInformation = false,
+                    AddFilenameSuffix = false,
+                    OutputSubmissionJSON = false,
+                    IncludeArtifacts = false,
+                    CompressLogFiles = false,
+                    LogCompression = LogCompression.DeflateMaximum,
+                    DeleteUnnecessaryFiles = false,
+                    CreateIRDAfterDumping = false,
+
+                    // Protection Scanning Options
+                    ScanArchivesForProtection = true,
+                    IncludeDebugProtectionInformation = false,
+                    HideDriveLetters = false,
+
+                    // Redump Login Information
+                    RetrieveMatchInformation = true,
+                    RedumpUsername = null,
+                    RedumpPassword = null,
+                };
+            }
+
+            // The first argument is the system type
+            System = args[0].Trim('"').ToRedumpSystem();
+
+            // Loop through the arguments and parse out values
+            for (index = 1; index < args.Length; index++)
+            {
+                // Use specific program
+                if (UseInput.ProcessInput(args, ref index))
+                    Options.InternalProgram = UseInput.Value.ToInternalProgram();
+
+                // Include seed info file
+                else if (LoadSeedInput.ProcessInput(args, ref index))
+                    Seed = Builder.CreateFromFile(LoadSeedInput.Value);
+
+                // Disable placeholder values in submission info
+                else if (NoPlaceholdersInput.ProcessInput(args, ref index))
+                    Options.AddPlaceholders = false;
+
+                // Create IRD from output files (PS3 only)
+                else if (CreateIrdInput.ProcessInput(args, ref index))
+                    Options.CreateIRDAfterDumping = true;
+
+                // Set the log compression type (requires --zip)
+                else if (LogCompressionInput.ProcessInput(args, ref index))
+                    Options.LogCompression = LogCompressionInput.Value.ToLogCompression();
+
+                // Retrieve Redump match information
+                else if (NoRetrieveInput.ProcessInput(args, ref index))
+                    Options.RetrieveMatchInformation = false;
+
+                // Redump login
+                else if (args[index].StartsWith("-c=") || args[index].StartsWith("--credentials="))
+                {
+                    string[] credentials = args[index].Split('=')[1].Split(';');
+                    Options.RedumpUsername = credentials[0];
+                    Options.RedumpPassword = credentials[1];
+                }
+                else if (args[index] == "-c" || args[index] == "--credentials")
+                {
+                    Options.RedumpUsername = args[index + 1];
+                    Options.RedumpPassword = args[index + 2];
+                    index += 2;
+                }
+
+                // Redump username
+                else if (UsernameInput.ProcessInput(args, ref index))
+                    Options.RedumpUsername = UsernameInput.Value;
+
+                // Redump password
+                else if (PasswordInput.ProcessInput(args, ref index))
+                    Options.RedumpPassword = PasswordInput.Value;
+
+                // Pull all information (requires Redump login)
+                else if (PullAllInput.ProcessInput(args, ref index))
+                    Options.PullAllInformation = true;
+
+                // Use a device path for physical checks
+                else if (PathInput.ProcessInput(args, ref index))
+                    DevicePath = PathInput.Value;
+
+                // Scan for protection (requires device path)
+                else if (ScanInput.ProcessInput(args, ref index))
+                    scan = true;
+
+                // Disable scanning archives (requires --scan)
+                else if (ScanInput.ProcessInput(args, ref index))
+                    enableArchives = false;
+
+                // Enable debug protection information (requires --scan)
+                else if (EnableDebugInput.ProcessInput(args, ref index))
+                    enableDebug = true;
+
+                // Hide drive letters from scan output (requires --scan)
+                else if (HideDriveLettersInput.ProcessInput(args, ref index))
+                    hideDriveLetters = true;
+
+                // Add filename suffix
+                else if (SuffixInput.ProcessInput(args, ref index))
+                    Options.AddFilenameSuffix = true;
+
+                // Output submission JSON
+                else if (JsonInput.ProcessInput(args, ref index))
+                    Options.OutputSubmissionJSON = true;
+
+                // Include JSON artifacts
+                else if (IncludeArtifactsInput.ProcessInput(args, ref index))
+                    Options.IncludeArtifacts = true;
+
+                // Compress log and extraneous files
+                else if (ZipInput.ProcessInput(args, ref index))
+                    Options.CompressLogFiles = true;
+
+                // Delete unnecessary files
+                else if (DeleteInput.ProcessInput(args, ref index))
+                    Options.DeleteUnnecessaryFiles = true;
+
+                // Default, add to inputs
+                else
+                    Inputs.Add(args[index]);
+            }
+
+            // Now deal with the complex options
+            Options.ScanForProtection = scan && !string.IsNullOrEmpty(DevicePath);
+            Options.ScanArchivesForProtection = enableArchives && scan && !string.IsNullOrEmpty(DevicePath);
+            Options.IncludeDebugProtectionInformation = enableDebug && scan && !string.IsNullOrEmpty(DevicePath);
+            Options.HideDriveLetters = hideDriveLetters && scan && !string.IsNullOrEmpty(DevicePath);
+
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => Inputs.Count > 0;
+    }
+}

MPF.Check/MPF.Check.csproj

@@ -12,7 +12,7 @@
         <Nullable>enable</Nullable>
         <SuppressTfmSupportBuildWarnings>true</SuppressTfmSupportBuildWarnings>
         <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
-        <VersionPrefix>3.3.3</VersionPrefix>
+        <VersionPrefix>3.5.0</VersionPrefix>
 
         <!-- Package Properties -->
         <Title>MPF Check</Title>
@@ -43,7 +43,8 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="SabreTools.CommandLine" Version="[1.3.2]" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
     </ItemGroup>
 
 </Project>

MPF.Check/Program.cs

@@ -1,13 +1,12 @@
 using System;
-using System.IO;
+using System.Collections.Generic;
 #if NET40
 using System.Threading.Tasks;
 #endif
-using MPF.Frontend;
-using MPF.Frontend.Tools;
-using SabreTools.RedumpLib;
-using SabreTools.RedumpLib.Data;
-using SabreTools.RedumpLib.Web;
+using MPF.Check.Features;
+using MPF.Frontend.Features;
+using SabreTools.CommandLine;
+using SabreTools.CommandLine.Features;
 
 namespace MPF.Check
 {
@@ -15,547 +14,126 @@ namespace MPF.Check
     {
         public static void Main(string[] args)
         {
-            // Create a default options object
-            var options = new Options()
-            {
-                // Internal Program
-                InternalProgram = InternalProgram.NONE,
+            // Create the command set
+            var mainFeature = new MainFeature();
+            var commandSet = CreateCommands(mainFeature);
 
-                // Extra Dumping Options
-                ScanForProtection = false,
-                AddPlaceholders = true,
-                PullAllInformation = false,
-                AddFilenameSuffix = false,
-                OutputSubmissionJSON = false,
-                IncludeArtifacts = false,
-                CompressLogFiles = false,
-                DeleteUnnecessaryFiles = false,
-                CreateIRDAfterDumping = false,
-
-                // Protection Scanning Options
-                ScanArchivesForProtection = true,
-                IncludeDebugProtectionInformation = false,
-                HideDriveLetters = false,
-
-                // Redump Login Information
-                RetrieveMatchInformation = true,
-                RedumpUsername = null,
-                RedumpPassword = null,
-            };
-
-            // Try processing the standalone arguments
-            bool? standaloneProcessed = OptionsLoader.ProcessStandaloneArguments(args);
-            if (standaloneProcessed != false)
-            {
-                if (standaloneProcessed == null)
-                    DisplayHelp();
-                return;
-            }
-
-            // Setup common outputs
-            CommandOptions opts;
-            RedumpSystem? knownSystem;
-            int startIndex;
-
-            // Use interactive mode
-            if (args.Length > 0 && (args[0] == "-i" || args[0] == "--interactive"))
-            {
-                startIndex = 1;
-                opts = InteractiveMode(options, out knownSystem);
-            }
-
-            // Use normal commandline parameters
-            else
-            {
-                // Try processing the common arguments
-                bool success = OptionsLoader.ProcessCommonArguments(args, out knownSystem, out var error);
-                if (!success)
-                {
-                    DisplayHelp(error);
-                    return;
-                }
-
-                // Loop through and process options
-                startIndex = 1;
-                opts = LoadFromArguments(args, options, ref startIndex);
-            }
-
-            if (options.InternalProgram == InternalProgram.NONE)
-            {
-                DisplayHelp("A program name needs to be provided");
-                return;
-            }
-
-            // Validate the supplied credentials
-            if (options.RetrieveMatchInformation
-                && !string.IsNullOrEmpty(options.RedumpUsername)
-                && !string.IsNullOrEmpty(options.RedumpPassword))
-            {
-                bool? validated = RedumpClient.ValidateCredentials(options.RedumpUsername!, options.RedumpPassword!).GetAwaiter().GetResult();
-                string message = validated switch
-                {
-                    true => "Redump username and password accepted!",
-                    false => "Redump username and password denied!",
-                    null => "An error occurred validating your credentials!",
-                };
-
-                Console.WriteLine(message);
-            }
-
-            // Loop through all the rest of the args
-            for (int i = startIndex; i < args.Length; i++)
-            {
-                // Check for a file
-                if (!File.Exists(args[i].Trim('"')))
-                {
-                    DisplayHelp($"{args[i].Trim('"')} does not exist");
-                    return;
-                }
-
-                // Get the full file path
-                string filepath = Path.GetFullPath(args[i].Trim('"'));
-
-                // Now populate an environment
-                Drive? drive = null;
-                if (!string.IsNullOrEmpty(opts.DevicePath))
-                    drive = Drive.Create(null, opts.DevicePath!);
-
-                var env = new DumpEnvironment(options,
-                    filepath,
-                    drive,
-                    knownSystem,
-                    internalProgram: null);
-                env.SetProcessor();
-
-                // Finally, attempt to do the output dance
-                var result = env.VerifyAndSaveDumpOutput(seedInfo: opts.Seed)
-                    .ConfigureAwait(false).GetAwaiter().GetResult();
-                Console.WriteLine(result.Message);
-            }
-        }
-
-        /// <summary>
-        /// Display help for MPF.Check
-        /// </summary>
-        /// <param name="error">Error string to prefix the help text with</param>
-        private static void DisplayHelp(string? error = null)
-        {
-            if (error != null)
-                Console.WriteLine(error);
-
-            Console.WriteLine("Usage:");
-            Console.WriteLine("MPF.Check <system> [options] </path/to/output.cue/iso> ...");
-            Console.WriteLine();
-            Console.WriteLine("Standalone Options:");
-            Console.WriteLine("-h, -?, --help          Show this help text");
-            Console.WriteLine("--version               Print the program version");
-            Console.WriteLine("-lc, --listcodes        List supported comment/content site codes");
-            Console.WriteLine("-lm, --listmedia        List supported media types");
-            Console.WriteLine("-ls, --listsystems      List supported system types");
-            Console.WriteLine("-lp, --listprograms     List supported dumping program outputs");
-            Console.WriteLine("-i, --interactive       Enable interactive mode");
-            Console.WriteLine();
-
-            Console.WriteLine("Check Options:");
-            Console.WriteLine("-u, --use <program>            Dumping program output type [REQUIRED]");
-            Console.WriteLine("    --load-seed <path>         Load a seed submission JSON for user information");
-            Console.WriteLine("    --no-placeholders          Disable placeholder values in submission info");
-            Console.WriteLine("    --create-ird               Create IRD from output files (PS3 only)");
-            Console.WriteLine("    --no-retrieve              Disable retrieving match information from Redump");
-            Console.WriteLine("-c, --credentials <user> <pw>  Redump username and password (incompatible with --no-retrieve)");
-            Console.WriteLine("    --pull-all                 Pull all information from Redump (requires --credentials)");
-            Console.WriteLine("-p, --path <drivepath>         Physical drive path for additional checks");
-            Console.WriteLine("-s, --scan                     Enable copy protection scan (requires --path)");
-            Console.WriteLine("    --disable-archives         Disable scanning archives (requires --scan)");
-            Console.WriteLine("    --enable-debug             Enable debug protection information (requires --scan)");
-            Console.WriteLine("    --hide-drive-letters       Hide drive letters from scan output (requires --scan)");
-            Console.WriteLine("-x, --suffix                   Enable adding filename suffix");
-            Console.WriteLine("-j, --json                     Enable submission JSON output");
-            Console.WriteLine("    --include-artifacts        Include artifacts in JSON (requires --json)");
-            Console.WriteLine("-z, --zip                      Enable log file compression");
-            Console.WriteLine("-d, --delete                   Enable unnecessary file deletion");
-            Console.WriteLine();
-            Console.WriteLine("WARNING: Check will overwrite both any existing submission information files as well");
-            Console.WriteLine("as any log archives. Please make backups of those if you need to before running Check.");
-            Console.WriteLine();
-        }
-
-        /// <summary>
-        /// Enable interactive mode for entering information
-        /// </summary>
-        private static CommandOptions InteractiveMode(Options options, out RedumpSystem? system)
-        {
-            // Create return values
-            var opts = new CommandOptions();
-            system = null;
-
-            // These values require multiple parts to be active
-            bool scan = false,
-                enableArchives = true,
-                enableDebug = false,
-                hideDriveLetters = false;
-
-            // Create state values
-            string? result = string.Empty;
-
-        root:
-            Console.Clear();
-            Console.WriteLine("MPF.Check Interactive Mode - Main Menu");
-            Console.WriteLine("-------------------------");
-            Console.WriteLine();
-            Console.WriteLine($"1) Set system (Currently '{system}')");
-            Console.WriteLine($"2) Set dumping program (Currently '{options.InternalProgram}')");
-            Console.WriteLine($"3) Set seed path (Currently '{opts.Seed}')");
-            Console.WriteLine($"4) Add placeholders (Currently '{options.AddPlaceholders}')");
-            Console.WriteLine($"5) Create IRD (Currently '{options.CreateIRDAfterDumping}')");
-            Console.WriteLine($"6) Attempt Redump matches (Currently '{options.RetrieveMatchInformation}')");
-            Console.WriteLine($"7) Redump credentials (Currently '{options.RedumpUsername}')");
-            Console.WriteLine($"8) Pull all information (Currently '{options.PullAllInformation}')");
-            Console.WriteLine($"9) Set device path (Currently '{opts.DevicePath}')");
-            Console.WriteLine($"A) Scan for protection (Currently '{scan}')");
-            Console.WriteLine($"B) Scan archives for protection (Currently '{enableArchives}')");
-            Console.WriteLine($"C) Debug protection scan output (Currently '{enableDebug}')");
-            Console.WriteLine($"D) Hide drive letters in protection output (Currently '{hideDriveLetters}')");
-            Console.WriteLine($"E) Hide filename suffix (Currently '{options.AddFilenameSuffix}')");
-            Console.WriteLine($"F) Output submission JSON (Currently '{options.OutputSubmissionJSON}')");
-            Console.WriteLine($"G) Include JSON artifacts (Currently '{options.IncludeArtifacts}')");
-            Console.WriteLine($"H) Compress logs (Currently '{options.CompressLogFiles}')");
-            Console.WriteLine($"I) Delete unnecessary files (Currently '{options.DeleteUnnecessaryFiles}')");
-            Console.WriteLine();
-            Console.WriteLine($"Q) Exit the program");
-            Console.WriteLine($"X) Start checking");
-            Console.Write("> ");
-
-            result = Console.ReadLine();
-            switch (result)
-            {
-                case "1":
-                    goto system;
-                case "2":
-                    goto dumpingProgram;
-                case "3":
-                    goto seedPath;
-                case "4":
-                    options.AddPlaceholders = !options.AddPlaceholders;
-                    goto root;
-                case "5":
-                    options.CreateIRDAfterDumping = !options.CreateIRDAfterDumping;
-                    goto root;
-                case "6":
-                    options.RetrieveMatchInformation = !options.RetrieveMatchInformation;
-                    goto root;
-                case "7":
-                    goto redumpCredentials;
-                case "8":
-                    options.PullAllInformation = !options.PullAllInformation;
-                    goto root;
-                case "9":
-                    goto devicePath;
-                case "a":
-                case "A":
-                    scan = !scan;
-                    goto root;
-                case "b":
-                case "B":
-                    enableArchives = !enableArchives;
-                    goto root;
-                case "c":
-                case "C":
-                    enableDebug = !enableDebug;
-                    goto root;
-                case "d":
-                case "D":
-                    hideDriveLetters = !hideDriveLetters;
-                    goto root;
-                case "e":
-                case "E":
-                    options.AddFilenameSuffix = !options.AddFilenameSuffix;
-                    goto root;
-                case "f":
-                case "F":
-                    options.OutputSubmissionJSON = !options.OutputSubmissionJSON;
-                    goto root;
-                case "g":
-                case "G":
-                    options.IncludeArtifacts = !options.IncludeArtifacts;
-                    goto root;
-                case "h":
-                case "H":
-                    options.CompressLogFiles = !options.CompressLogFiles;
-                    goto root;
-                case "i":
-                case "I":
-                    options.DeleteUnnecessaryFiles = !options.DeleteUnnecessaryFiles;
-                    goto root;
-
-                case "q":
-                case "Q":
-                    Environment.Exit(0);
-                    break;
-                case "x":
-                case "X":
-                    Console.Clear();
-                    goto exit;
-                case "z":
-                case "Z":
-                    Console.WriteLine("It is pitch black. You are likely to be eaten by a grue.");
-                    Console.Write("> ");
-                    Console.ReadLine();
-                    goto root;
-                default:
-                    Console.WriteLine($"Invalid selection: {result}");
-                    Console.ReadLine();
-                    goto root;
-            }
-
-        system:
-            Console.WriteLine();
-            Console.WriteLine("Input the system and press Enter:");
-            Console.Write("> ");
-            result = Console.ReadLine();
-            system = Extensions.ToRedumpSystem(result);
-            goto root;
-
-        dumpingProgram:
-            Console.WriteLine();
-            Console.WriteLine("Input the dumping program and press Enter:");
-            Console.Write("> ");
-            result = Console.ReadLine();
-            options.InternalProgram = result.ToInternalProgram();
-            goto root;
-
-        seedPath:
-            Console.WriteLine();
-            Console.WriteLine("Input the seed path and press Enter:");
-            Console.Write("> ");
-            result = Console.ReadLine();
-            opts.Seed = Builder.CreateFromFile(result);
-            goto root;
-
-        redumpCredentials:
-            Console.WriteLine();
-            Console.WriteLine("Enter your Redumper username and press Enter:");
-            Console.Write("> ");
-            options.RedumpUsername = Console.ReadLine();
-
-            Console.WriteLine("Enter your Redumper password (hidden) and press Enter:");
-            Console.Write("> ");
-            options.RedumpPassword = string.Empty;
-            while (true)
-            {
-                var key = Console.ReadKey(true);
-                if (key.Key == ConsoleKey.Enter)
-                    break;
-
-                options.RedumpPassword += key.KeyChar;
-            }
-
-            goto root;
-
-        devicePath:
-            Console.WriteLine();
-            Console.WriteLine("Input the device path and press Enter:");
-            Console.Write("> ");
-            opts.DevicePath = Console.ReadLine();
-            goto root;
-
-        exit:
-            // Now deal with the complex options
-            options.ScanForProtection = scan && !string.IsNullOrEmpty(opts.DevicePath);
-            options.ScanArchivesForProtection = enableArchives && scan && !string.IsNullOrEmpty(opts.DevicePath);
-            options.IncludeDebugProtectionInformation = enableDebug && scan && !string.IsNullOrEmpty(opts.DevicePath);
-            options.HideDriveLetters = hideDriveLetters && scan && !string.IsNullOrEmpty(opts.DevicePath);
-
-            return opts;
-        }
-
-        /// <summary>
-        /// Load the current set of options from application arguments
-        /// </summary>
-        private static CommandOptions LoadFromArguments(string[] args, Options options, ref int startIndex)
-        {
-            // Create return values
-            var opts = new CommandOptions();
-
-            // These values require multiple parts to be active
-            bool scan = false,
-                enableArchives = true,
-                enableDebug = false,
-                hideDriveLetters = false;
-
-            // If we have no arguments, just return
+            // If we have no args, show the help and quit
             if (args == null || args.Length == 0)
             {
-                startIndex = 0;
-                return opts;
+                BaseFeature.DisplayHelp();
+                return;
             }
 
-            // If we have an invalid start index, just return
-            if (startIndex < 0 || startIndex >= args.Length)
-                return opts;
+            // Get the first argument as a feature flag
+            string featureName = args[0];
 
-            // Loop through the arguments and parse out values
-            for (; startIndex < args.Length; startIndex++)
+            // Try processing the standalone arguments
+            var topLevel = commandSet.GetTopLevel(featureName);
+            switch (topLevel)
             {
-                // Use specific program
-                if (args[startIndex].StartsWith("-u=") || args[startIndex].StartsWith("--use="))
-                {
-                    string internalProgram = args[startIndex].Split('=')[1];
-                    options.InternalProgram = internalProgram.ToInternalProgram();
-                }
-                else if (args[startIndex] == "-u" || args[startIndex] == "--use")
-                {
-                    string internalProgram = args[startIndex + 1];
-                    options.InternalProgram = internalProgram.ToInternalProgram();
-                    startIndex++;
-                }
+                // Standalone Options
+                case Help: BaseFeature.DisplayHelp(); return;
+                case VersionFeature version: version.Execute(); return;
+                case ListCodesFeature lc: lc.Execute(); return;
+                case ListMediaTypesFeature lm: lm.Execute(); return;
+                case ListProgramsFeature lp: lp.Execute(); return;
+                case ListSystemsFeature ls: ls.Execute(); return;
 
-                // Include seed info file
-                else if (args[startIndex].StartsWith("--load-seed="))
-                {
-                    string seedInfo = args[startIndex].Split('=')[1];
-                    opts.Seed = Builder.CreateFromFile(seedInfo);
-                }
-                else if (args[startIndex] == "--load-seed")
-                {
-                    string seedInfo = args[startIndex + 1];
-                    opts.Seed = Builder.CreateFromFile(seedInfo);
-                    startIndex++;
-                }
+                // Interactive Mode
+                case InteractiveFeature interactive:
+                    if (!interactive.ProcessArgs(args, 0))
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+                    if (!interactive.VerifyInputs())
+                    {
+                        Console.Error.WriteLine("At least one input is required");
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+                    if (!interactive.Execute())
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+
+                    break;
+
+                // Default Behavior
+                default:
+                    if (!mainFeature.ProcessArgs(args, 0))
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+                    if (!mainFeature.VerifyInputs())
+                    {
+                        Console.Error.WriteLine("At least one input is required");
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
+                    if (!mainFeature.Execute())
+                    {
+                        BaseFeature.DisplayHelp();
+                        return;
+                    }
 
-                // Disable placeholder values in submission info
-                else if (args[startIndex].Equals("--no-placeholders"))
-                {
-                    options.AddPlaceholders = false;
-                }
-
-                // Create IRD from output files (PS3 only)
-                else if (args[startIndex].Equals("--create-ird"))
-                {
-                    options.CreateIRDAfterDumping = true;
-                }
-
-                // Retrieve Redump match information
-                else if (args[startIndex] == "--no-retrieve")
-                {
-                    options.RetrieveMatchInformation = false;
-                }
-
-                // Redump login
-                else if (args[startIndex].StartsWith("-c=") || args[startIndex].StartsWith("--credentials="))
-                {
-                    string[] credentials = args[startIndex].Split('=')[1].Split(';');
-                    options.RedumpUsername = credentials[0];
-                    options.RedumpPassword = credentials[1];
-                }
-                else if (args[startIndex] == "-c" || args[startIndex] == "--credentials")
-                {
-                    options.RedumpUsername = args[startIndex + 1];
-                    options.RedumpPassword = args[startIndex + 2];
-                    startIndex += 2;
-                }
-
-                // Pull all information (requires Redump login)
-                else if (args[startIndex].Equals("--pull-all"))
-                {
-                    options.PullAllInformation = true;
-                }
-
-                // Use a device path for physical checks
-                else if (args[startIndex].StartsWith("-p=") || args[startIndex].StartsWith("--path="))
-                {
-                    opts.DevicePath = args[startIndex].Split('=')[1];
-                }
-                else if (args[startIndex] == "-p" || args[startIndex] == "--path")
-                {
-                    opts.DevicePath = args[startIndex + 1];
-                    startIndex++;
-                }
-
-                // Scan for protection (requires device path)
-                else if (args[startIndex].Equals("-s") || args[startIndex].Equals("--scan"))
-                {
-                    scan = true;
-                }
-
-                // Disable scanning archives (requires --scan)
-                else if (args[startIndex].Equals("--disable-archives"))
-                {
-                    enableArchives = false;
-                }
-
-                // Enable debug protection information (requires --scan)
-                else if (args[startIndex].Equals("--enable-debug"))
-                {
-                    enableDebug = true;
-                }
-
-                // Hide drive letters from scan output (requires --scan)
-                else if (args[startIndex].Equals("--hide-drive-letters"))
-                {
-                    hideDriveLetters = true;
-                }
-
-                // Add filename suffix
-                else if (args[startIndex].Equals("-x") || args[startIndex].Equals("--suffix"))
-                {
-                    options.AddFilenameSuffix = true;
-                }
-
-                // Output submission JSON
-                else if (args[startIndex].Equals("-j") || args[startIndex].Equals("--json"))
-                {
-                    options.OutputSubmissionJSON = true;
-                }
-
-                // Include JSON artifacts
-                else if (args[startIndex].Equals("--include-artifacts"))
-                {
-                    options.IncludeArtifacts = true;
-                }
-
-                // Compress log and extraneous files
-                else if (args[startIndex].Equals("-z") || args[startIndex].Equals("--zip"))
-                {
-                    options.CompressLogFiles = true;
-                }
-
-                // Delete unnecessary files
-                else if (args[startIndex].Equals("-d") || args[startIndex].Equals("--delete"))
-                {
-                    options.DeleteUnnecessaryFiles = true;
-                }
-
-                // Default, we fall out
-                else
-                {
                     break;
-                }
             }
-
-            // Now deal with the complex options
-            options.ScanForProtection = scan && !string.IsNullOrEmpty(opts.DevicePath);
-            options.ScanArchivesForProtection = enableArchives && scan && !string.IsNullOrEmpty(opts.DevicePath);
-            options.IncludeDebugProtectionInformation = enableDebug && scan && !string.IsNullOrEmpty(opts.DevicePath);
-            options.HideDriveLetters = hideDriveLetters && scan && !string.IsNullOrEmpty(opts.DevicePath);
-
-            return opts;
         }
 
         /// <summary>
-        /// Represents commandline options
+        /// Create the command set for the program
         /// </summary>
-        private class CommandOptions
+        private static CommandSet CreateCommands(MainFeature mainFeature)
         {
-            /// <summary>
-            /// Seed submission info from an input file
-            /// </summary>
-            public SubmissionInfo? Seed { get; set; } = null;
+            List<string> header = [
+                "MPF.CLI [standalone|system] [options] <path> ...",
+                string.Empty,
+            ];
 
-            /// <summary>
-            /// Path to the device to scan
-            /// </summary>
-            public string? DevicePath { get; set; } = null;
+            List<string> footer = [
+                string.Empty,
+                "WARNING: Check will overwrite both any existing submission information files as well",
+                "as any log archives. Please make backups of those if you need to before running Check.",
+                string.Empty,
+            ];
+
+            var commandSet = new CommandSet(header, footer);
+
+            // Standalone Options
+            commandSet.Add(new Help());
+            commandSet.Add(new VersionFeature());
+            commandSet.Add(new ListCodesFeature());
+            commandSet.Add(new ListMediaTypesFeature());
+            commandSet.Add(new ListSystemsFeature());
+            commandSet.Add(new ListProgramsFeature());
+            commandSet.Add(new InteractiveFeature());
+
+            // Check Options
+            commandSet.Add(mainFeature.UseInput);
+            commandSet.Add(mainFeature.LoadSeedInput);
+            commandSet.Add(mainFeature.NoPlaceholdersInput);
+            commandSet.Add(mainFeature.CreateIrdInput);
+            commandSet.Add(mainFeature.NoRetrieveInput);
+            commandSet.Add(mainFeature.UsernameInput);
+            commandSet.Add(mainFeature.PasswordInput);
+            commandSet.Add(mainFeature.PullAllInput);
+            commandSet.Add(mainFeature.PathInput);
+            commandSet.Add(mainFeature.ScanInput);
+            commandSet.Add(mainFeature.DisableArchivesInput);
+            commandSet.Add(mainFeature.EnableDebugInput);
+            commandSet.Add(mainFeature.HideDriveLettersInput);
+            commandSet.Add(mainFeature.SuffixInput);
+            commandSet.Add(mainFeature.JsonInput);
+            commandSet.Add(mainFeature.IncludeArtifactsInput);
+            commandSet.Add(mainFeature.ZipInput);
+            commandSet.Add(mainFeature.LogCompressionInput);
+            commandSet.Add(mainFeature.DeleteInput);
+
+            return commandSet;
         }
     }
 }

MPF.ExecutionContexts.Test/AaruTests.cs

@@ -40,15 +40,15 @@ namespace MPF.ExecutionContexts.Test
 
         [Theory]
         [InlineData(null, null, null, "filename.bin", null, null)]
-        [InlineData(RedumpSystem.IBMPCcompatible, MediaType.CDROM, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
+        [InlineData(RedumpSystem.IBMPCcompatible, MediaType.CDROM, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
         [InlineData(RedumpSystem.IBMPCcompatible, MediaType.DVD, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
-        [InlineData(RedumpSystem.SegaDreamcast, MediaType.GDROM, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
+        [InlineData(RedumpSystem.SegaDreamcast, MediaType.GDROM, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
         [InlineData(RedumpSystem.HDDVDVideo, MediaType.HDDVD, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
         [InlineData(RedumpSystem.BDVideo, MediaType.BluRay, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
-        [InlineData(RedumpSystem.NintendoGameCube, MediaType.NintendoGameCubeGameDisc, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
-        [InlineData(RedumpSystem.NintendoWii, MediaType.NintendoWiiOpticalDisc, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
-        [InlineData(RedumpSystem.NintendoWiiU, MediaType.NintendoWiiUOpticalDisc, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
-        [InlineData(RedumpSystem.IBMPCcompatible, MediaType.FloppyDisk, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
+        [InlineData(RedumpSystem.NintendoGameCube, MediaType.NintendoGameCubeGameDisc, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
+        [InlineData(RedumpSystem.NintendoWii, MediaType.NintendoWiiOpticalDisc, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
+        [InlineData(RedumpSystem.NintendoWiiU, MediaType.NintendoWiiUOpticalDisc, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
+        [InlineData(RedumpSystem.IBMPCcompatible, MediaType.FloppyDisk, "/dev/sr0", "filename.bin", 2, "--debug True --verbose True media dump --force True --private True --store-encrypted True --title-keys False --trim True --speed 2 --retry-passes 1000 /dev/sr0 \"filename.bin\"")]
         public void DefaultValueTest(RedumpSystem? system,
             MediaType? type,
             string? drivePath,

MPF.ExecutionContexts.Test/MPF.ExecutionContexts.Test.csproj

@@ -1,7 +1,7 @@
 <Project Sdk="Microsoft.NET.Sdk">
 
     <PropertyGroup>
-        <TargetFrameworks>net6.0;net8.0;net9.0</TargetFrameworks>
+        <TargetFrameworks>net8.0;net9.0</TargetFrameworks>
         <CheckEolTargetFramework>false</CheckEolTargetFramework>
         <LangVersion>latest</LangVersion>
         <Nullable>enable</Nullable>
@@ -14,13 +14,13 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="Microsoft.CodeCoverage" Version="17.13.0" />
-        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.13.0" />
-        <PackageReference Include="Newtonsoft.Json" Version="13.0.3" />
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="Microsoft.CodeCoverage" Version="17.14.1" />
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.14.1" />
+        <PackageReference Include="Newtonsoft.Json" Version="13.0.4" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
         <PackageReference Include="xunit" Version="2.9.3" />
         <PackageReference Include="xunit.abstractions" Version="2.0.3" />
-        <PackageReference Include="xunit.analyzers" Version="1.21.0" />
+        <PackageReference Include="xunit.analyzers" Version="1.24.0" />
         <PackageReference Include="xunit.assert" Version="2.9.3" />
         <PackageReference Include="xunit.core" Version="2.9.3" />
         <PackageReference Include="xunit.extensibility.core" Version="2.9.3" />
@@ -29,7 +29,7 @@
             <PrivateAssets>all</PrivateAssets>
             <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
         </PackageReference>
-        <PackageReference Include="xunit.runner.visualstudio" Version="3.0.2">
+        <PackageReference Include="xunit.runner.visualstudio" Version="3.1.5">
             <PrivateAssets>all</PrivateAssets>
             <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
         </PackageReference>

MPF.ExecutionContexts.Test/RedumperTests.cs

@@ -41,9 +41,9 @@ namespace MPF.ExecutionContexts.Test
         };
 
         [Theory]
-        [InlineData(null, null, null, "filename.bin", null, "")]
+        [InlineData(null, null, null, "filename.bin", null, "disc --verbose --skeleton --retries=1000 --image-name=\"filename\" --drive-type=GENERIC --drive-read-method=BE --drive-sector-order=DATA_C2_SUB --plextor-leadin-retries=1000")]
         [InlineData(RedumpSystem.IBMPCcompatible, MediaType.CDROM, "/dev/sr0", "path/filename.bin", 2, "disc --verbose --skeleton --drive=/dev/sr0 --speed=2 --retries=1000 --image-path=\"path\" --image-name=\"filename\" --drive-type=GENERIC --drive-read-method=BE --drive-sector-order=DATA_C2_SUB --plextor-leadin-retries=1000")]
-        [InlineData(RedumpSystem.IBMPCcompatible, MediaType.DVD, "/dev/sr0", "path/filename.bin", 2, "disc --verbose --drive=/dev/sr0 --speed=2 --retries=1000 --image-path=\"path\" --image-name=\"filename\" --drive-type=GENERIC --drive-read-method=BE --drive-sector-order=DATA_C2_SUB --plextor-leadin-retries=1000")]
+        [InlineData(RedumpSystem.IBMPCcompatible, MediaType.DVD, "/dev/sr0", "path/filename.bin", 2, "disc --verbose --skeleton --drive=/dev/sr0 --speed=2 --retries=1000 --image-path=\"path\" --image-name=\"filename\" --drive-type=GENERIC --drive-read-method=BE --drive-sector-order=DATA_C2_SUB --plextor-leadin-retries=1000")]
         [InlineData(RedumpSystem.NintendoGameCube, MediaType.NintendoGameCubeGameDisc, "/dev/sr0", "path/filename.bin", 2, "disc --verbose --drive=/dev/sr0 --speed=2 --retries=1000 --image-path=\"path\" --image-name=\"filename\" --drive-type=GENERIC --drive-read-method=BE --drive-sector-order=DATA_C2_SUB --plextor-leadin-retries=1000")]
         [InlineData(RedumpSystem.NintendoWii, MediaType.NintendoWiiOpticalDisc, "/dev/sr0", "path/filename.bin", 2, "disc --verbose --drive=/dev/sr0 --speed=2 --retries=1000 --image-path=\"path\" --image-name=\"filename\" --drive-type=GENERIC --drive-read-method=BE --drive-sector-order=DATA_C2_SUB --plextor-leadin-retries=1000")]
         [InlineData(RedumpSystem.HDDVDVideo, MediaType.HDDVD, "/dev/sr0", "path/filename.bin", 2, "disc --verbose --drive=/dev/sr0 --speed=2 --retries=1000 --image-path=\"path\" --image-name=\"filename\" --drive-type=GENERIC --drive-read-method=BE --drive-sector-order=DATA_C2_SUB --plextor-leadin-retries=1000")]

MPF.ExecutionContexts/Aaru/ExecutionContext.cs

@@ -638,11 +638,6 @@ namespace MPF.ExecutionContexts.Aaru
                 (_inputs[FlagStrings.SpeedLong] as Int8Input)?.SetValue((sbyte)driveSpeed);
             }
 
-            // First check to see if the combination of system and MediaType is valid
-            var validTypes = RedumpSystem.MediaTypes();
-            if (!validTypes.Contains(MediaType))
-                return;
-
             // Set retry count
             int rereadCount = GetInt32Setting(options, SettingConstants.RereadCount, SettingConstants.RereadCountDefault);
             if (rereadCount > 0)
@@ -673,57 +668,13 @@ namespace MPF.ExecutionContexts.Aaru
                 (_inputs[FlagStrings.PrivateLong] as BooleanInput)?.SetValue(true);
             }
 
-            // TODO: Look at dump-media formats and the like and see what options there are there to fill in defaults
-            // Now sort based on disc type
-            switch (MediaType)
-            {
-                case SabreTools.RedumpLib.Data.MediaType.CDROM:
-                    // Currently no defaults set
-                    break;
-                case SabreTools.RedumpLib.Data.MediaType.DVD:
-                    this[FlagStrings.StoreEncryptedLong] = true; // TODO: Make this configurable
-                    (_inputs[FlagStrings.StoreEncryptedLong] as BooleanInput)?.SetValue(true);
-                    this[FlagStrings.TitleKeysLong] = false; // TODO: Make this configurable
-                    (_inputs[FlagStrings.TitleKeysLong] as BooleanInput)?.SetValue(false);
-                    this[FlagStrings.TrimLong] = true; // TODO: Make this configurable
-                    (_inputs[FlagStrings.TrimLong] as BooleanInput)?.SetValue(true);
-                    break;
-                case SabreTools.RedumpLib.Data.MediaType.GDROM:
-                    // Currently no defaults set
-                    break;
-                case SabreTools.RedumpLib.Data.MediaType.HDDVD:
-                    this[FlagStrings.StoreEncryptedLong] = true; // TODO: Make this configurable
-                    (_inputs[FlagStrings.StoreEncryptedLong] as BooleanInput)?.SetValue(true);
-                    this[FlagStrings.TitleKeysLong] = false; // TODO: Make this configurable
-                    (_inputs[FlagStrings.TitleKeysLong] as BooleanInput)?.SetValue(false);
-                    this[FlagStrings.TrimLong] = true; // TODO: Make this configurable
-                    (_inputs[FlagStrings.TrimLong] as BooleanInput)?.SetValue(true);
-                    break;
-                case SabreTools.RedumpLib.Data.MediaType.BluRay:
-                    this[FlagStrings.StoreEncryptedLong] = true; // TODO: Make this configurable
-                    (_inputs[FlagStrings.StoreEncryptedLong] as BooleanInput)?.SetValue(true);
-                    this[FlagStrings.TitleKeysLong] = false; // TODO: Make this configurable
-                    (_inputs[FlagStrings.TitleKeysLong] as BooleanInput)?.SetValue(false);
-                    this[FlagStrings.TrimLong] = true; // TODO: Make this configurable
-                    (_inputs[FlagStrings.TrimLong] as BooleanInput)?.SetValue(true);
-                    break;
-
-                // Special Formats
-                case SabreTools.RedumpLib.Data.MediaType.NintendoGameCubeGameDisc:
-                    // Currently no defaults set
-                    break;
-                case SabreTools.RedumpLib.Data.MediaType.NintendoWiiOpticalDisc:
-                    // Currently no defaults set
-                    break;
-                case SabreTools.RedumpLib.Data.MediaType.NintendoWiiUOpticalDisc:
-                    // Currently no defaults set
-                    break;
-
-                // Non-optical
-                case SabreTools.RedumpLib.Data.MediaType.FloppyDisk:
-                    // Currently no defaults set
-                    break;
-            }
+            // Set generic, sane defaults to cover all bases
+            this[FlagStrings.StoreEncryptedLong] = true;
+            (_inputs[FlagStrings.StoreEncryptedLong] as BooleanInput)?.SetValue(true);
+            this[FlagStrings.TitleKeysLong] = false;
+            (_inputs[FlagStrings.TitleKeysLong] as BooleanInput)?.SetValue(false);
+            this[FlagStrings.TrimLong] = true;
+            (_inputs[FlagStrings.TrimLong] as BooleanInput)?.SetValue(true);
         }
 
         /// <inheritdoc/>

MPF.ExecutionContexts/MPF.ExecutionContexts.csproj

@@ -11,7 +11,7 @@
         <SuppressTfmSupportBuildWarnings>true</SuppressTfmSupportBuildWarnings>
         <SymbolPackageFormat>snupkg</SymbolPackageFormat>
         <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
-        <VersionPrefix>3.3.3</VersionPrefix>
+        <VersionPrefix>3.5.0</VersionPrefix>
         <WarningsNotAsErrors>NU5104</WarningsNotAsErrors>
 
         <!-- Package Properties -->
@@ -32,7 +32,7 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
     </ItemGroup>
 
 </Project>

MPF.ExecutionContexts/Redumper/CommandStrings.cs

@@ -21,6 +21,8 @@ namespace MPF.ExecutionContexts.Redumper
         public const string Info = "info";
         public const string Skeleton = "skeleton";
         public const string FlashMT1339 = "flash::mt1339";
+        public const string FlashSD616 = "flash::sd616";
+        public const string FlashPlextor = "flash::plextor";
         public const string Subchannel = "subchannel";
         public const string Debug = "debug";
         public const string FixMSF = "fixmsf";

MPF.ExecutionContexts/Redumper/ExecutionContext.cs

@@ -49,11 +49,6 @@ namespace MPF.ExecutionContexts.Redumper
 
         #region Flag Values
 
-        /// <summary>
-        /// Mode being run
-        /// </summary>
-        public string? ModeValue { get; set; }
-
         /// <summary>
         /// Set of all command flags
         /// </summary>
@@ -241,9 +236,9 @@ namespace MPF.ExecutionContexts.Redumper
             var parameters = new StringBuilder();
 
             // Command Mode
-            ModeValue ??= CommandStrings.NONE;
-            if (ModeValue != CommandStrings.NONE)
-                parameters.Append($"{ModeValue} ");
+            BaseCommand ??= CommandStrings.NONE;
+            if (BaseCommand != CommandStrings.NONE)
+                parameters.Append($"{BaseCommand} ");
 
             // Loop though and append all existing
             foreach (var kvp in _inputs)
@@ -270,8 +265,8 @@ namespace MPF.ExecutionContexts.Redumper
         public override bool IsDumpingCommand()
         {
             // `dump` command does not provide hashes so will error out after dump if run via MPF
-            return ModeValue == CommandStrings.NONE
-                || ModeValue == CommandStrings.Disc;
+            return BaseCommand == CommandStrings.NONE
+                || BaseCommand == CommandStrings.Disc;
         }
 
         /// <inheritdoc/>
@@ -291,25 +286,13 @@ namespace MPF.ExecutionContexts.Redumper
             int? driveSpeed,
             Dictionary<string, string?> options)
         {
-            BaseCommand = CommandStrings.NONE;
-            switch (MediaType)
-            {
-                case SabreTools.RedumpLib.Data.MediaType.CDROM:
-                case SabreTools.RedumpLib.Data.MediaType.DVD:
-                case SabreTools.RedumpLib.Data.MediaType.NintendoGameCubeGameDisc:
-                case SabreTools.RedumpLib.Data.MediaType.NintendoWiiOpticalDisc:
-                case SabreTools.RedumpLib.Data.MediaType.HDDVD:
-                case SabreTools.RedumpLib.Data.MediaType.BluRay:
-                case SabreTools.RedumpLib.Data.MediaType.NintendoWiiUOpticalDisc:
-                    ModeValue = CommandStrings.Disc;
-                    break;
-                default:
-                    BaseCommand = null;
-                    return;
-            }
+            BaseCommand = CommandStrings.Disc;
 
-            this[FlagStrings.Drive] = true;
-            (_inputs[FlagStrings.Drive] as StringInput)?.SetValue(drivePath ?? string.Empty);
+            if (drivePath != null)
+            {
+                this[FlagStrings.Drive] = true;
+                (_inputs[FlagStrings.Drive] as StringInput)?.SetValue(drivePath);
+            }
 
             if (driveSpeed != null && driveSpeed > 0)
             {
@@ -330,27 +313,27 @@ namespace MPF.ExecutionContexts.Redumper
             }
             if (GetBooleanSetting(options, SettingConstants.EnableSkeleton, SettingConstants.EnableSkeletonDefault))
             {
-                // Enable skeleton for CD dumps only by default
+                // Enable skeleton for CD and DVD only, by default
                 switch (MediaType)
                 {
                     case SabreTools.RedumpLib.Data.MediaType.CDROM:
-                        switch (RedumpSystem)
-                        {
-                            case SabreTools.RedumpLib.Data.RedumpSystem.SuperAudioCD:
-                                break;
-                            default:
-                                this[FlagStrings.Skeleton] = true;
-                                (_inputs[FlagStrings.Skeleton] as FlagInput)?.SetValue(true);
-                                break;
-                        }
+                    case SabreTools.RedumpLib.Data.MediaType.DVD:
+                        this[FlagStrings.Skeleton] = true;
+                        (_inputs[FlagStrings.Skeleton] as FlagInput)?.SetValue(true);
                         break;
+
+                    // If the type is unknown, also enable
+                    case null:
+                        this[FlagStrings.Skeleton] = true;
+                        (_inputs[FlagStrings.Skeleton] as FlagInput)?.SetValue(true);
+                        break;
+
                     default:
                         break;
                 }
             }
 
             string? readMethod = GetStringSetting(options, SettingConstants.ReadMethod, SettingConstants.ReadMethodDefault);
-
             if (!string.IsNullOrEmpty(readMethod) && readMethod != ReadMethod.NONE.ToString())
             {
                 this[FlagStrings.DriveReadMethod] = true;
@@ -390,7 +373,7 @@ namespace MPF.ExecutionContexts.Redumper
             }
 
             int retries = GetInt32Setting(options, SettingConstants.RereadCount, SettingConstants.RereadCountDefault);
-            if(retries > 0)
+            if (retries > 0)
             {
                 this[FlagStrings.Retries] = true;
                 (_inputs[FlagStrings.Retries] as Int32Input)?.SetValue(retries);
@@ -402,13 +385,17 @@ namespace MPF.ExecutionContexts.Redumper
                 this[FlagStrings.PlextorLeadinRetries] = true;
                 (_inputs[FlagStrings.PlextorLeadinRetries] as Int32Input)?.SetValue(leadinRetries);
             }
+
+            if (GetBooleanSetting(options, SettingConstants.RefineSectorMode, SettingConstants.RefineSectorModeDefault))
+            {
+                this[FlagStrings.RefineSectorMode] = true;
+                (_inputs[FlagStrings.RefineSectorMode] as FlagInput)?.SetValue(true);
+            }
         }
 
         /// <inheritdoc/>
         protected override bool ValidateAndSetParameters(string? parameters)
         {
-            BaseCommand = CommandStrings.NONE;
-
             // The string has to be valid by itself first
             if (string.IsNullOrEmpty(parameters))
                 return false;
@@ -417,7 +404,7 @@ namespace MPF.ExecutionContexts.Redumper
             string[] parts = SplitParameterString(parameters!);
 
             // Setup the modes
-            ModeValue = null;
+            BaseCommand = null;
 
             // All modes should be cached separately
             int index = 0;
@@ -444,16 +431,18 @@ namespace MPF.ExecutionContexts.Redumper
                     case CommandStrings.Info:
                     case CommandStrings.Skeleton:
                     case CommandStrings.FlashMT1339:
+                    case CommandStrings.FlashSD616:
+                    case CommandStrings.FlashPlextor:
                     case CommandStrings.Subchannel:
                     case CommandStrings.Debug:
                     case CommandStrings.FixMSF:
                     case CommandStrings.DebugFlip:
                     case CommandStrings.DriveTest:
                         // Only allow one mode per command
-                        if (ModeValue != null)
+                        if (BaseCommand != null)
                             continue;
 
-                        ModeValue = part;
+                        BaseCommand = part;
                         break;
 
                     // Default is either a flag or an invalid mode

MPF.ExecutionContexts/Redumper/SettingConstants.cs

@@ -17,6 +17,9 @@ namespace MPF.ExecutionContexts.Redumper
         public const string ReadMethod = "RedumperReadMethod";
         public static readonly string ReadMethodDefault = Redumper.ReadMethod.NONE.ToString();
 
+        public const string RefineSectorMode = "RedumperRefineSectorMode";
+        public const bool RefineSectorModeDefault = false;
+
         public const string RereadCount = "RedumperRereadCount";
         public const int RereadCountDefault = 20;
 

MPF.Frontend.Test/EnumExtensionsTests.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.Linq;
 using SabreTools.RedumpLib.Data;
 using Xunit;
+using LogCompression = MPF.Processors.LogCompression;
 using RedumperDriveType = MPF.ExecutionContexts.Redumper.DriveType;
 using RedumperReadMethod = MPF.ExecutionContexts.Redumper.ReadMethod;
 using RedumperSectorOrder = MPF.ExecutionContexts.Redumper.SectorOrder;
@@ -27,6 +28,29 @@ namespace MPF.Frontend.Test
         {
             string? actual = prog.LongName();
             Assert.Equal(expected, actual);
+
+            if (prog != null)
+            {
+                actual = EnumExtensions.GetLongName(prog);
+                Assert.Equal(expected, actual);
+            }
+        }
+
+        [Theory]
+        [InlineData(null, "Unknown")]
+        [InlineData(LogCompression.DeflateDefault, "ZIP using Deflate (Level 5)")]
+        [InlineData(LogCompression.DeflateMaximum, "ZIP using Deflate (Level 9)")]
+        [InlineData(LogCompression.Zstd19, "ZIP using Zstd (Level 19)")]
+        public void LongName_LogCompression(LogCompression? comp, string? expected)
+        {
+            string? actual = comp.LongName();
+            Assert.Equal(expected, actual);
+
+            if (comp != null)
+            {
+                actual = EnumExtensions.GetLongName(comp);
+                Assert.Equal(expected, actual);
+            }
         }
 
         [Theory]
@@ -38,6 +62,12 @@ namespace MPF.Frontend.Test
         {
             string? actual = method.LongName();
             Assert.Equal(expected, actual);
+
+            if (method != null)
+            {
+                actual = EnumExtensions.GetLongName(method);
+                Assert.Equal(expected, actual);
+            }
         }
 
         [Theory]
@@ -51,6 +81,12 @@ namespace MPF.Frontend.Test
         {
             string? actual = order.LongName();
             Assert.Equal(expected, actual);
+
+            if (order != null)
+            {
+                actual = EnumExtensions.GetLongName(order);
+                Assert.Equal(expected, actual);
+            }
         }
 
         [Theory]
@@ -67,6 +103,12 @@ namespace MPF.Frontend.Test
         {
             string? actual = type.LongName();
             Assert.Equal(expected, actual);
+
+            if (type != null)
+            {
+                actual = EnumExtensions.GetLongName(type);
+                Assert.Equal(expected, actual);
+            }
         }
 
         #endregion

MPF.Frontend.Test/InterfaceConstantsTests.cs

@@ -13,8 +13,8 @@ namespace MPF.Frontend.Test
         [InlineData(MediaType.HDDVD, 24)]
         [InlineData(MediaType.BluRay, 16)]
         [InlineData(MediaType.NintendoWiiUOpticalDisc, 16)]
-        [InlineData(MediaType.LaserDisc, 1)]
-        [InlineData(null, 1)]
+        [InlineData(MediaType.LaserDisc, 72)]
+        [InlineData(null, 72)]
         public void GetAllowedDriveSpeedForMediaTypeTest(MediaType? mediaType, int maxExpected)
         {
             var actual = InterfaceConstants.GetSpeedsForMediaType(mediaType);

MPF.Frontend.Test/MPF.Frontend.Test.csproj

@@ -1,7 +1,7 @@
 <Project Sdk="Microsoft.NET.Sdk">
 
     <PropertyGroup>
-        <TargetFrameworks>net6.0;net8.0;net9.0</TargetFrameworks>
+        <TargetFrameworks>net8.0;net9.0</TargetFrameworks>
         <CheckEolTargetFramework>false</CheckEolTargetFramework>
         <LangVersion>latest</LangVersion>
         <Nullable>enable</Nullable>
@@ -14,13 +14,13 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="Microsoft.CodeCoverage" Version="17.13.0" />
-        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.13.0" />
-        <PackageReference Include="Newtonsoft.Json" Version="13.0.3" />
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="Microsoft.CodeCoverage" Version="17.14.1" />
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.14.1" />
+        <PackageReference Include="Newtonsoft.Json" Version="13.0.4" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
         <PackageReference Include="xunit" Version="2.9.3" />
         <PackageReference Include="xunit.abstractions" Version="2.0.3" />
-        <PackageReference Include="xunit.analyzers" Version="1.21.0" />
+        <PackageReference Include="xunit.analyzers" Version="1.24.0" />
         <PackageReference Include="xunit.assert" Version="2.9.3" />
         <PackageReference Include="xunit.core" Version="2.9.3" />
         <PackageReference Include="xunit.extensibility.core" Version="2.9.3" />
@@ -29,7 +29,7 @@
             <PrivateAssets>all</PrivateAssets>
             <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
         </PackageReference>
-        <PackageReference Include="xunit.runner.visualstudio" Version="3.0.2">
+        <PackageReference Include="xunit.runner.visualstudio" Version="3.1.5">
             <PrivateAssets>all</PrivateAssets>
             <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
         </PackageReference>

MPF.Frontend.Test/Tools/ProtectionToolTests.cs

@@ -8,12 +8,114 @@ namespace MPF.Frontend.Test.Tools
 {
     public class ProtectionToolTests
     {
+        #region SanitizeContextSensitiveProtections
+
+        [Fact]
+        public void SanitizeContextSensitiveProtections_Empty_NoException()
+        {
+            Dictionary<string, List<string>>? protections = [];
+            var actual = ProtectionTool.SanitizeContextSensitiveProtections(protections);
+            Assert.NotNull(actual);
+            Assert.Empty(actual);
+        }
+
+        [Fact]
+        public void SanitizeContextSensitiveProtections_NoMatch_NoChange()
+        {
+            Dictionary<string, List<string>>? protections = [];
+            protections["File1"] = ["Protection 1", "Protection 2"];
+
+            var actual = ProtectionTool.SanitizeContextSensitiveProtections(protections);
+            Assert.NotNull(actual);
+
+            string[] keys = [.. actual.Keys];
+            Assert.Contains("File1", keys);
+        }
+
+        [Fact]
+        public void SanitizeContextSensitiveProtections_Match_NoSub_NoChange()
+        {
+            Dictionary<string, List<string>>? protections = [];
+            protections["File1"] = ["Protection 1", "Protection 2"];
+            protections["File2"] = ["SecuROM Release Control - ANYTHING", "Protection 2"];
+            protections["File3"] = ["Protection 1", "SecuROM Release Control -"];
+
+            var actual = ProtectionTool.SanitizeContextSensitiveProtections(protections);
+            Assert.NotNull(actual);
+
+            string[] keys = [.. actual.Keys];
+            Assert.Contains("File1", keys);
+            Assert.Contains("File2", keys);
+            Assert.Contains("File3", keys);
+        }
+
+        [Fact]
+        public void SanitizeContextSensitiveProtections_Match_Sub_Change()
+        {
+            Dictionary<string, List<string>>? protections = [];
+            protections["File1"] = ["Protection 1", "Protection 2"];
+            protections["File2"] = ["SecuROM Release Control - ANYTHING"];
+            protections["File2/FileA"] = ["ANYTHING GitHub ANYTHING"];
+            protections["File2/FileB"] = ["SecuROM 7"];
+            protections["File2/FileC"] = ["SecuROM 8"];
+            protections["File2/FileD"] = ["SecuROM Content Activation"];
+            protections["File2/FileE"] = ["SecuROM Data File Activation"];
+            protections["File2/FileF"] = ["Unlock"];
+
+            var actual = ProtectionTool.SanitizeContextSensitiveProtections(protections);
+            Assert.NotNull(actual);
+
+            string[] keys = [.. actual.Keys];
+            Assert.Contains("File1", keys);
+            Assert.Contains("File2", keys);
+            Assert.Contains("File2/FileA", keys);
+            Assert.DoesNotContain("File2/FileB", keys);
+            Assert.DoesNotContain("File2/FileC", keys);
+            Assert.DoesNotContain("File2/FileD", keys);
+            Assert.DoesNotContain("File2/FileE", keys);
+            Assert.DoesNotContain("File2/FileF", keys);
+        }
+
+        [Fact]
+        public void SanitizeContextSensitiveProtections_MultiMatch_Sub_Change()
+        {
+            Dictionary<string, List<string>>? protections = [];
+            protections["File1"] = ["Protection 1", "Protection 2"];
+            protections["File2"] = ["SecuROM Release Control - ANYTHING"];
+            protections["File2/FileA"] = ["ANYTHING GitHub ANYTHING"];
+            protections["File2/FileB"] = ["SecuROM 7"];
+            protections["File2/FileC"] = ["SecuROM 8"];
+            protections["File3"] = ["SecuROM Release Control - ANYTHING"];
+            protections["File3/FileD"] = ["SecuROM Content Activation"];
+            protections["File3/FileE"] = ["SecuROM Data File Activation"];
+            protections["File3/FileF"] = ["Unlock"];
+
+            var actual = ProtectionTool.SanitizeContextSensitiveProtections(protections);
+            Assert.NotNull(actual);
+
+            string[] keys = [.. actual.Keys];
+            Assert.Contains("File1", keys);
+            Assert.Contains("File2", keys);
+            Assert.Contains("File2/FileA", keys);
+            Assert.DoesNotContain("File2/FileB", keys);
+            Assert.DoesNotContain("File2/FileC", keys);
+            Assert.Contains("File3", keys);
+            Assert.DoesNotContain("File3/FileD", keys);
+            Assert.DoesNotContain("File3/FileE", keys);
+            Assert.DoesNotContain("File3/FileF", keys);
+        }
+
+        #endregion
+
+        #region SanitizeFoundProtections
+
         [Fact]
         public void SanitizeFoundProtections_Exception()
         {
             List<string> protections =
             [
                 "Anything Else Protection",
+                "[Access issue when opening file",
                 "[Exception opening file",
             ];
 
@@ -581,9 +683,9 @@ namespace MPF.Frontend.Test.Tools
         [Theory]
         [InlineData(0, "Macrovision Protected Application [SafeDisc 0.00.000], SafeDisc 0.00.000, SafeDisc Lite")]
         [InlineData(1, "Macrovision Protected Application [SafeDisc 0.00.000 / SRV Tool APP], SafeDisc 0.00.000, SafeDisc Lite")]
-        [InlineData(2, "Macrovision Security Driver, Macrovision Security Driver [SafeDisc 1.11.111], SafeDisc 0.00.000, SafeDisc 0.00.000-1.11.111, SafeDisc Lite")]
-        [InlineData(3, "Macrovision Security Driver, Macrovision Security Driver [SafeDisc 1.11.111], SafeDisc 0.00.000, SafeDisc Lite")]
-        [InlineData(4, "Macrovision Security Driver, Macrovision Security Driver [SafeDisc 1.11.111], SafeDisc Lite")]
+        [InlineData(2, "SafeDisc 0.00.000, SafeDisc 0.00.000-1.11.111, SafeDisc 3+ (DVD), SafeDisc Lite")]
+        [InlineData(3, "SafeDisc 0.00.000, SafeDisc 3+ (DVD), SafeDisc Lite")]
+        [InlineData(4, "SafeDisc 3+ (DVD), SafeDisc Lite")]
         [InlineData(5, "Macrovision Security Driver, SafeDisc Lite")]
         [InlineData(6, "Macrovision Protection File, SafeDisc 2+, SafeDisc 3+ (DVD), SafeDisc Lite")]
         [InlineData(7, "SafeDisc 3+ (DVD)")]
@@ -592,11 +694,11 @@ namespace MPF.Frontend.Test.Tools
         {
             List<string> protections =
            [
-               "Macrovision Protected Application [SafeDisc 0.00.000]",
+                "Macrovision Protected Application [SafeDisc 0.00.000]",
                 "Macrovision Protected Application [SafeDisc 0.00.000 / SRV Tool APP]",
                 "SafeDisc 0.00.000-1.11.111",
                 "SafeDisc 0.00.000",
-                "Macrovision Security Driver [SafeDisc 1.11.111]",
+                "Macrovision Security Driver 1.11.111 / SafeDisc 1.11.111",
                 "Macrovision Security Driver",
                 "SafeDisc Lite",
                 "SafeDisc 3+ (DVD)",
@@ -615,6 +717,38 @@ namespace MPF.Frontend.Test.Tools
             Assert.Equal(expected, sanitized);
         }
 
+        [Fact]
+        public void SanitizeFoundProtectsion_SafeDisc_MacrovisionSecurityDriver()
+        {
+            List<string> protections =
+           [
+                "Macrovision Protection File [Likely indicates either SafeDisc 1.45.011+ (CD) or CDS-300]",
+                "Macrovision Security Driver 4.00.060 / SafeDisc 4.00.000-4.70.000",
+                "SafeDisc 4.00.000-4.00.003",
+                "SafeDisc 4.00.002, Macrovision Protected Application"
+            ];
+
+            string expected = "SafeDisc 4.00.002";
+
+            string sanitized = ProtectionTool.SanitizeFoundProtections(protections);
+            Assert.Equal(expected, sanitized);
+        }
+
+        [Fact]
+        public void SanitizeFoundProtections_SecuROM()
+        {
+            List<string> protections =
+            [
+                "SecuROM Release Control",
+                "SecuROM Release Control - ANYTHING",
+                "SecuROM Release Control - ANYTHING ELSE",
+                "SecuROM Release Control - EVEN MORE",
+            ];
+
+            string sanitized = ProtectionTool.SanitizeFoundProtections(protections);
+            Assert.Equal("SecuROM Release Control", sanitized);
+        }
+
         [Theory]
         [InlineData(0)]
         [InlineData(1)]
@@ -669,5 +803,7 @@ namespace MPF.Frontend.Test.Tools
         }
 
         #endregion
+
+        #endregion
     }
 }

MPF.Frontend/DumpEnvironment.cs

@@ -356,6 +356,9 @@ namespace MPF.Frontend
             // If we're on an unsupported type, update the status accordingly
             return mediaType switch
             {
+                // Null means it will be handled by the program
+                null => ResultEventArgs.Success("Ready to dump"),
+
                 // Fully supported types
                 MediaType.BluRay
                     or MediaType.CDROM
@@ -377,7 +380,7 @@ namespace MPF.Frontend
                 MediaType.UMD => ResultEventArgs.Failure($"{mediaType.LongName()} supported for submission info parsing"),
 
                 // Specifically unknown type
-                MediaType.NONE => ResultEventArgs.Failure($"Please select a valid media type"),
+                MediaType.NONE => ResultEventArgs.Failure("Please select a valid media type"),
 
                 // Undumpable but recognized types
                 _ => ResultEventArgs.Failure($"{mediaType.LongName()} media are not supported for dumping"),
@@ -449,14 +452,12 @@ namespace MPF.Frontend
         /// <summary>
         /// Verify that the current environment has a complete dump and create submission info is possible
         /// </summary>
-        /// <param name="mediaType">Media type for controlling expected file sets, if available</param>
         /// <param name="resultProgress">Optional result progress callback</param>
         /// <param name="protectionProgress">Optional protection progress callback</param>
         /// <param name="processUserInfo">Optional user prompt to deal with submission information</param>
         /// <param name="seedInfo">A seed SubmissionInfo object that contains user data</param>
         /// <returns>Result instance with the outcome</returns>
         public async Task<ResultEventArgs> VerifyAndSaveDumpOutput(
-            MediaType? mediaType = null,
             IProgress<ResultEventArgs>? resultProgress = null,
             IProgress<ProtectionProgress>? protectionProgress = null,
             ProcessUserInfoDelegate? processUserInfo = null,
@@ -485,16 +486,10 @@ namespace MPF.Frontend
             var outputDirectory = Path.GetDirectoryName(OutputPath);
             var outputFilename = Path.GetFileName(OutputPath);
 
-            // Determine the media type from the processor, if not provided
-            mediaType ??= _processor.DetermineMediaType(outputDirectory, outputFilename);
-
-            // Check to make sure that the output had all the correct files
-            List<string> missingFiles = _processor.FoundAllFiles(mediaType, outputDirectory, outputFilename);
-            if (missingFiles.Count > 0)
-            {
-                resultProgress.Report(ResultEventArgs.Failure($"There were files missing from the output:\n{string.Join("\n", [.. missingFiles])}"));
-                return ResultEventArgs.Failure("Error! Please check output directory as dump may be incomplete!");
-            }
+            // Determine the media type from the processor
+            MediaType? mediaType = _processor.DetermineMediaType(outputDirectory, outputFilename);
+            if (mediaType == null)
+                return ResultEventArgs.Failure("Could not determine the media type from output files...");
 
             // Extract the information from the output files
             resultProgress.Report(ResultEventArgs.Success("Extracting output information from output files..."));
@@ -507,7 +502,10 @@ namespace MPF.Frontend
                 _processor,
                 resultProgress,
                 protectionProgress);
-            resultProgress.Report(ResultEventArgs.Success("Extracting information complete!"));
+            if (submissionInfo == null)
+                return ResultEventArgs.Failure("There was an issue extracting information!");
+            else
+                resultProgress.Report(ResultEventArgs.Success("Extracting information complete!"));
 
             // Inject seed submission info data, if necessary
             if (seedInfo != null)
@@ -587,7 +585,7 @@ namespace MPF.Frontend
                 await Task.Run(() =>
 #endif
                 {
-                    bool compressSuccess = _processor.CompressLogFiles(mediaType, outputDirectory, outputFilename, filenameSuffix, out string compressResult);
+                    bool compressSuccess = _processor.CompressLogFiles(mediaType, _options.LogCompression, outputDirectory, outputFilename, filenameSuffix, out string compressResult);
                     if (compressSuccess)
                         resultProgress.Report(ResultEventArgs.Success(compressResult));
                     else

MPF.Frontend/EnumExtensions.cs

@@ -6,6 +6,7 @@ using System.Collections.Concurrent;
 #endif
 using System.Reflection;
 using SabreTools.RedumpLib.Data;
+using LogCompression = MPF.Processors.LogCompression;
 using RedumperDriveType = MPF.ExecutionContexts.Redumper.DriveType;
 using RedumperReadMethod = MPF.ExecutionContexts.Redumper.ReadMethod;
 using RedumperSectorOrder = MPF.ExecutionContexts.Redumper.SectorOrder;
@@ -61,6 +62,14 @@ namespace MPF.Frontend
             }
         }
 
+        /// <summary>
+        /// Get the string representation of the InternalProgram enum values
+        /// </summary>
+        /// <param name="prog">InternalProgram value to convert</param>
+        /// <returns>String representing the value, if possible</returns>
+        public static string LongName(this InternalProgram prog)
+            => ((InternalProgram?)prog).LongName();
+
         /// <summary>
         /// Get the string representation of the InternalProgram enum values
         /// </summary>
@@ -92,6 +101,31 @@ namespace MPF.Frontend
             };
         }
 
+        /// <summary>
+        /// Get the string representation of the LogCompression enum values
+        /// </summary>
+        /// <param name="comp">LogCompression value to convert</param>
+        /// <returns>String representing the value, if possible</returns>
+        public static string LongName(this LogCompression comp)
+            => ((LogCompression?)comp).LongName();
+
+        /// <summary>
+        /// Get the string representation of the LogCompression enum values
+        /// </summary>
+        /// <param name="comp">LogCompression value to convert</param>
+        /// <returns>String representing the value, if possible</returns>
+        public static string LongName(this LogCompression? comp)
+        {
+            return comp switch
+            {
+                LogCompression.DeflateDefault => "ZIP using Deflate (Level 5)",
+                LogCompression.DeflateMaximum => "ZIP using Deflate (Level 9)",
+                LogCompression.Zstd19 => "ZIP using Zstd (Level 19)",
+
+                _ => "Unknown",
+            };
+        }
+
         /// <summary>
         /// Get the string representation of the RedumperReadMethod enum values
         /// </summary>
@@ -232,6 +266,28 @@ namespace MPF.Frontend
             };
         }
 
+        /// <summary>
+        /// Get the LogCompression enum value for a given string
+        /// </summary>
+        /// <param name="logCompression">String value to convert</param>
+        /// <returns>LogCompression represented by teh string, if possible</returns>
+        public static LogCompression ToLogCompression(this string? logCompression)
+        {
+            return (logCompression?.ToLowerInvariant()) switch
+            {
+                "deflate"
+                    or "deflatedefault"
+                    or "zip" => LogCompression.DeflateDefault,
+                "deflatemaximum"
+                    or "max"
+                    or "maximum" => LogCompression.DeflateMaximum,
+                "zstd"
+                    or "zstd19" => LogCompression.Zstd19,
+
+                _ => LogCompression.DeflateDefault,
+            };
+        }
+
         /// <summary>
         /// Get the RedumperReadMethod enum value for a given string
         /// </summary>

MPF.Frontend/Features/ListCodesFeature.cs

@@ -0,0 +1,38 @@
+using System;
+using SabreTools.CommandLine;
+
+namespace MPF.Frontend.Features
+{
+    public class ListCodesFeature : Feature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "listcodes";
+
+        private static readonly string[] _flags = ["lc", "listcodes"];
+
+        private const string _description = "List supported comment/content site codes";
+
+        #endregion
+
+        public ListCodesFeature()
+            : base(DisplayName, _flags, _description)
+        {
+        }
+
+        /// <inheritdoc/>
+        public override bool Execute()
+        {
+            Console.WriteLine("Supported Site Codes:");
+            foreach (string siteCode in SabreTools.RedumpLib.Data.Extensions.ListSiteCodes())
+            {
+                Console.WriteLine(siteCode);
+            }
+
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => true;
+    }
+}

MPF.Frontend/Features/ListMediaTypesFeature.cs

@@ -0,0 +1,38 @@
+using System;
+using SabreTools.CommandLine;
+
+namespace MPF.Frontend.Features
+{
+    public class ListMediaTypesFeature : Feature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "listmedia";
+
+        private static readonly string[] _flags = ["lm", "listmedia"];
+
+        private const string _description = "List supported media types";
+
+        #endregion
+
+        public ListMediaTypesFeature()
+            : base(DisplayName, _flags, _description)
+        {
+        }
+
+        /// <inheritdoc/>
+        public override bool Execute()
+        {
+            Console.WriteLine("Supported Media Types:");
+            foreach (string mediaType in SabreTools.RedumpLib.Data.Extensions.ListMediaTypes())
+            {
+                Console.WriteLine(mediaType);
+            }
+
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => true;
+    }
+}

MPF.Frontend/Features/ListProgramsFeature.cs

@@ -0,0 +1,57 @@
+using System;
+using System.Collections.Generic;
+using SabreTools.CommandLine;
+
+namespace MPF.Frontend.Features
+{
+    public class ListProgramsFeature : Feature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "listprograms";
+
+        private static readonly string[] _flags = ["lp", "listprograms"];
+
+        private const string _description = "List supported dumping program outputs";
+
+        #endregion
+
+        public ListProgramsFeature()
+            : base(DisplayName, _flags, _description)
+        {
+        }
+
+        /// <inheritdoc/>
+        public override bool Execute()
+        {
+            Console.WriteLine("Supported Programs:");
+            foreach (string program in ListPrograms())
+            {
+                Console.WriteLine(program);
+            }
+
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => true;
+
+        /// <summary>
+        /// List all programs with their short usable names
+        /// </summary>
+        private static List<string> ListPrograms()
+        {
+            var programs = new List<string>();
+
+            foreach (var val in Enum.GetValues(typeof(InternalProgram)))
+            {
+                if (((InternalProgram)val!) == InternalProgram.NONE)
+                    continue;
+
+                programs.Add($"{((InternalProgram?)val).ShortName()} - {((InternalProgram?)val).LongName()}");
+            }
+
+            return programs;
+        }
+    }
+}

MPF.Frontend/Features/ListSystemsFeature.cs

@@ -0,0 +1,38 @@
+using System;
+using SabreTools.CommandLine;
+
+namespace MPF.Frontend.Features
+{
+    public class ListSystemsFeature : Feature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "listsystems";
+
+        private static readonly string[] _flags = ["ls", "listsystems"];
+
+        private const string _description = "List supported system types";
+
+        #endregion
+
+        public ListSystemsFeature()
+            : base(DisplayName, _flags, _description)
+        {
+        }
+
+        /// <inheritdoc/>
+        public override bool Execute()
+        {
+            Console.WriteLine("Supported Systems:");
+            foreach (string system in SabreTools.RedumpLib.Data.Extensions.ListSystems())
+            {
+                Console.WriteLine(system);
+            }
+
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => true;
+    }
+}

MPF.Frontend/Features/VersionFeature.cs

@@ -0,0 +1,34 @@
+using System;
+using MPF.Frontend.Tools;
+using SabreTools.CommandLine;
+
+namespace MPF.Frontend.Features
+{
+    public class VersionFeature : Feature
+    {
+        #region Feature Definition
+
+        public const string DisplayName = "version";
+
+        private static readonly string[] _flags = ["version"];
+
+        private const string _description = "Display the program version";
+
+        #endregion
+
+        public VersionFeature()
+            : base(DisplayName, _flags, _description)
+        {
+        }
+
+        /// <inheritdoc/>
+        public override bool Execute()
+        {
+            Console.WriteLine(FrontendTool.GetCurrentVersion() ?? "Unknown version");
+            return true;
+        }
+
+        /// <inheritdoc/>
+        public override bool VerifyInputs() => true;
+    }
+}

MPF.Frontend/InterfaceConstants.cs

@@ -33,11 +33,6 @@ namespace MPF.Frontend
         /// </summary>
         public static List<int> BD => _speedValues.FindAll(s => s <= 16);
 
-        /// <summary>
-        /// Set of accepted speeds for all other media
-        /// </summary>
-        public static List<int> Unknown => [1];
-
         /// <summary>
         /// Get list of all drive speeds for a given MediaType
         /// </summary>
@@ -55,7 +50,9 @@ namespace MPF.Frontend
                 MediaType.HDDVD => HDDVD,
                 MediaType.BluRay
                     or MediaType.NintendoWiiUOpticalDisc => BD,
-                _ => Unknown,
+
+                // Default to CD speed range
+                _ => CD,
             };
         }
     }

MPF.Frontend/MPF.Frontend.csproj

@@ -10,7 +10,7 @@
         <Nullable>enable</Nullable>
         <SuppressTfmSupportBuildWarnings>true</SuppressTfmSupportBuildWarnings>
         <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
-        <VersionPrefix>3.3.3</VersionPrefix>
+        <VersionPrefix>3.5.0</VersionPrefix>
 
         <!-- Package Properties -->
         <Authors>Matt Nadareski;ReignStumble;Jakz</Authors>
@@ -31,12 +31,14 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="BinaryObjectScanner" Version="3.3.4" />
-        <PackageReference Include="LibIRD" Version="0.9.3" />
+        <PackageReference Include="BinaryObjectScanner" Version="[3.4.5]" />
+        <PackageReference Include="LibIRD" Version="[1.0.0]" />
         <PackageReference Include="Microsoft.Management.Infrastructure" Version="3.0.0" Condition="!$(TargetFramework.StartsWith(`net2`)) AND !$(TargetFramework.StartsWith(`net3`)) AND !$(TargetFramework.StartsWith(`net40`)) AND !$(TargetFramework.StartsWith(`net452`))" />
         <PackageReference Include="Microsoft.Net.Http" Version="2.2.29" Condition="$(TargetFramework.StartsWith(`net452`))" />
-        <PackageReference Include="Newtonsoft.Json" Version="13.0.3" />
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="MinThreadingBridge" Version="0.11.4" Condition="$(TargetFramework.StartsWith(`net2`)) OR $(TargetFramework.StartsWith(`net3`)) OR $(TargetFramework.StartsWith(`net40`))" />
+        <PackageReference Include="Newtonsoft.Json" Version="13.0.4" />
+        <PackageReference Include="SabreTools.CommandLine" Version="[1.3.2]" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
         <PackageReference Include="System.Net.Http" Version="4.3.4" Condition="!$(TargetFramework.StartsWith(`net2`)) AND !$(TargetFramework.StartsWith(`net3`)) AND !$(TargetFramework.StartsWith(`net40`)) AND !$(TargetFramework.StartsWith(`net452`))" />
     </ItemGroup>
 

MPF.Frontend/Options.cs

@@ -2,6 +2,7 @@
 using SabreTools.RedumpLib.Data;
 using AaruSettings = MPF.ExecutionContexts.Aaru.SettingConstants;
 using DICSettings = MPF.ExecutionContexts.DiscImageCreator.SettingConstants;
+using LogCompression = MPF.Processors.LogCompression;
 using RedumperDriveType = MPF.ExecutionContexts.Redumper.DriveType;
 using RedumperReadMethod = MPF.ExecutionContexts.Redumper.ReadMethod;
 using RedumperSectorOrder = MPF.ExecutionContexts.Redumper.SectorOrder;
@@ -123,6 +124,15 @@ namespace MPF.Frontend
             set { Settings["CheckForUpdatesOnStartup"] = value.ToString(); }
         }
 
+        /// <summary>
+        /// Try to copy the update URL to the clipboard if one is found
+        /// </summary>
+        public bool CopyUpdateUrlToClipboard
+        {
+            get { return GetBooleanSetting(Settings, "CopyUpdateUrlToClipboard", true); }
+            set { Settings["CopyUpdateUrlToClipboard"] = value.ToString(); }
+        }
+
         /// <summary>
         /// Fast update label - Skips disc checks and updates path only
         /// </summary>
@@ -149,7 +159,7 @@ namespace MPF.Frontend
             get
             {
                 var valueString = GetStringSetting(Settings, "DefaultSystem", RedumpSystem.IBMPCcompatible.LongName());
-                var valueEnum = Extensions.ToRedumpSystem(valueString ?? string.Empty);
+                var valueEnum = (valueString ?? string.Empty).ToRedumpSystem();
                 return valueEnum;
             }
             set
@@ -427,6 +437,15 @@ namespace MPF.Frontend
             set { Settings[RedumperSettings.RereadCount] = value.ToString(); }
         }
 
+        /// <summary>
+        /// Enable the refine sector mode flag by default
+        /// </summary>
+        public bool RedumperRefineSectorMode
+        {
+            get { return GetBooleanSetting(Settings, RedumperSettings.RefineSectorMode, RedumperSettings.RefineSectorModeDefault); }
+            set { Settings[RedumperSettings.RefineSectorMode] = value.ToString(); }
+        }
+
         #endregion
 
         #region Extra Dumping Options
@@ -539,6 +558,22 @@ namespace MPF.Frontend
             set { Settings["CompressLogFiles"] = value.ToString(); }
         }
 
+        /// <summary>
+        /// Compression type used during log compression
+        /// </summary>
+        public LogCompression LogCompression
+        {
+            get
+            {
+                var valueString = GetStringSetting(Settings, "LogCompression", LogCompression.DeflateMaximum.ToString());
+                return valueString.ToLogCompression();
+            }
+            set
+            {
+                Settings["LogCompression"] = value.ToString();
+            }
+        }
+
         /// <summary>
         /// Delete unnecessary files to reduce space
         /// </summary>
@@ -561,15 +596,6 @@ namespace MPF.Frontend
 
         #region Skip Options
 
-        /// <summary>
-        /// Skip detecting media type on disc scan
-        /// </summary>
-        public bool SkipMediaTypeDetection
-        {
-            get { return GetBooleanSetting(Settings, "SkipMediaTypeDetection", false); }
-            set { Settings["SkipMediaTypeDetection"] = value.ToString(); }
-        }
-
         /// <summary>
         /// Skip detecting known system on disc scan
         /// </summary>

MPF.Frontend/Progress.cs

@@ -0,0 +1,108 @@
+#if NET20 || NET35 || NET40
+
+// Licensed to the .NET Foundation under one or more agreements.
+// The .NET Foundation licenses this file to you under the MIT license.
+
+using System;
+using System.Threading;
+using System.Diagnostics;
+
+namespace MPF.Frontend
+{
+    /// <summary>
+    /// Provides an IProgress{T} that invokes callbacks for each reported progress value.
+    /// </summary>
+    /// <typeparam name="T">Specifies the type of the progress report value.</typeparam>
+    /// <remarks>
+    /// Any handler provided to the constructor or event handlers registered with
+    /// the <see cref="ProgressChanged"/> event are invoked through a
+    /// <see cref="SynchronizationContext"/> instance captured
+    /// when the instance is constructed.  If there is no current SynchronizationContext
+    /// at the time of construction, the callbacks will be invoked on the ThreadPool.
+    /// </remarks>
+    /// <see href="https://github.com/dotnet/runtime/blob/main/src/libraries/System.Private.CoreLib/src/System/Progress.cs"/>
+    internal class Progress<T> : IProgress<T> where T : EventArgs
+    {
+        /// <summary>The synchronization context captured upon construction.  This will never be null.</summary>
+        private readonly SynchronizationContext? _synchronizationContext;
+        /// <summary>The handler specified to the constructor.  This may be null.</summary>
+        private readonly Action<T>? _handler;
+        /// <summary>A cached delegate used to post invocation to the synchronization context.</summary>
+        private readonly SendOrPostCallback _invokeHandlers;
+
+        /// <summary>Initializes the <see cref="Progress{T}"/>.</summary>
+        public Progress()
+        {
+            // Capture the current synchronization context.
+            // If there is no current context, we use a default instance targeting the ThreadPool.
+            _synchronizationContext = SynchronizationContext.Current ?? ProgressStatics.DefaultContext;
+            Debug.Assert(_synchronizationContext != null);
+            _invokeHandlers = new SendOrPostCallback(InvokeHandlers);
+        }
+
+        /// <summary>Initializes the <see cref="Progress{T}"/> with the specified callback.</summary>
+        /// <param name="handler">
+        /// A handler to invoke for each reported progress value.  This handler will be invoked
+        /// in addition to any delegates registered with the <see cref="ProgressChanged"/> event.
+        /// Depending on the <see cref="SynchronizationContext"/> instance captured by
+        /// the <see cref="Progress{T}"/> at construction, it's possible that this handler instance
+        /// could be invoked concurrently with itself.
+        /// </param>
+        /// <exception cref="ArgumentNullException">The <paramref name="handler"/> is null (<see langword="Nothing" /> in Visual Basic).</exception>
+        public Progress(Action<T> handler) : this()
+        {
+            _handler = handler ?? throw new ArgumentNullException(nameof(handler));
+        }
+
+        /// <summary>Raised for each reported progress value.</summary>
+        /// <remarks>
+        /// Handlers registered with this event will be invoked on the
+        /// <see cref="SynchronizationContext"/> captured when the instance was constructed.
+        /// </remarks>
+        public event EventHandler<T>? ProgressChanged;
+
+        /// <summary>Reports a progress change.</summary>
+        /// <param name="value">The value of the updated progress.</param>
+        protected virtual void OnReport(T value)
+        {
+            // If there's no handler, don't bother going through the sync context.
+            // Inside the callback, we'll need to check again, in case
+            // an event handler is removed between now and then.
+            Action<T>? handler = _handler;
+            EventHandler<T>? changedEvent = ProgressChanged;
+            if (handler != null || changedEvent != null)
+            {
+                // Post the processing to the sync context.
+                // (If T is a value type, it will get boxed here.)
+                _synchronizationContext?.Post(_invokeHandlers, value);
+            }
+        }
+
+        /// <summary>Reports a progress change.</summary>
+        /// <param name="value">The value of the updated progress.</param>
+        void IProgress<T>.Report(T value) { OnReport(value); }
+
+        /// <summary>Invokes the action and event callbacks.</summary>
+        /// <param name="state">The progress value.</param>
+        private void InvokeHandlers(object? state)
+        {
+            T value = (T)state!;
+
+            Action<T>? handler = _handler;
+            EventHandler<T>? changedEvent = ProgressChanged;
+
+            handler?.Invoke(value);
+            changedEvent?.Invoke(this, value);
+        }
+    }
+
+    /// <summary>Holds static values for <see cref="Progress{T}"/>.</summary>
+    /// <remarks>This avoids one static instance per type T.</remarks>
+    internal static class ProgressStatics
+    {
+        /// <summary>A default synchronization context that targets the ThreadPool.</summary>
+        internal static readonly SynchronizationContext DefaultContext = new();
+    }
+}
+
+#endif

MPF.Frontend/Tools/OptionsLoader.cs

@@ -32,129 +32,6 @@ namespace MPF.Frontend.Tools
 
         #region Arguments
 
-        /// <summary>
-        /// Process any standalone arguments for the program
-        /// </summary>
-        /// <returns>True if one of the arguments was processed, false otherwise</returns>
-        public static bool? ProcessStandaloneArguments(string[] args)
-        {
-            // Help options
-            if (args.Length == 0 || args[0] == "-h" || args[0] == "-?" || args[0] == "--help")
-                return null;
-
-            if (args[0] == "--version")
-            {
-                Console.WriteLine(FrontendTool.GetCurrentVersion() ?? "Unknown version");
-                return true;
-            }
-
-            // List options
-            if (args[0] == "-lc" || args[0] == "--listcodes")
-            {
-                Console.WriteLine("Supported Site Codes:");
-                foreach (string siteCode in Extensions.ListSiteCodes())
-                {
-                    Console.WriteLine(siteCode);
-                }
-
-                return true;
-            }
-            else if (args[0] == "-lm" || args[0] == "--listmedia")
-            {
-                Console.WriteLine("Supported Media Types:");
-                foreach (string mediaType in Extensions.ListMediaTypes())
-                {
-                    Console.WriteLine(mediaType);
-                }
-
-                return true;
-            }
-            else if (args[0] == "-lp" || args[0] == "--listprograms")
-            {
-                Console.WriteLine("Supported Programs:");
-                foreach (string program in ListPrograms())
-                {
-                    Console.WriteLine(program);
-                }
-
-                return true;
-            }
-            else if (args[0] == "-ls" || args[0] == "--listsystems")
-            {
-                Console.WriteLine("Supported Systems:");
-                foreach (string system in Extensions.ListSystems())
-                {
-                    Console.WriteLine(system);
-                }
-
-                return true;
-            }
-
-            return false;
-        }
-
-        /// <summary>
-        /// Process common arguments for all functionality
-        /// </summary>
-        /// <returns>True if all arguments pass, false otherwise</returns>
-        public static bool ProcessCommonArguments(string[] args, out RedumpSystem? system, out string? message)
-        {
-            // All other use requires at least 3 arguments
-            if (args.Length < 2)
-            {
-                system = null;
-                message = "Invalid number of arguments";
-                return false;
-            }
-
-            // Check the RedumpSystem
-            system = Extensions.ToRedumpSystem(args[0].Trim('"'));
-            if (system == null)
-            {
-                message = $"{args[0]} is not a recognized system";
-                return false;
-            }
-
-            message = null;
-            return true;
-        }
-
-        /// <summary>
-        /// Process common arguments for all functionality
-        /// </summary>
-        /// <returns>True if all arguments pass, false otherwise</returns>
-        public static bool ProcessCommonArguments(string[] args, out MediaType mediaType, out RedumpSystem? system, out string? message)
-        {
-            // All other use requires at least 3 arguments
-            if (args.Length < 3)
-            {
-                mediaType = MediaType.NONE;
-                system = null;
-                message = "Invalid number of arguments";
-                return false;
-            }
-
-            // Check the MediaType
-            mediaType = ToMediaType(args[0].Trim('"'));
-            if (mediaType == MediaType.NONE)
-            {
-                system = null;
-                message = $"{args[0]} is not a recognized media type";
-                return false;
-            }
-
-            // Check the RedumpSystem
-            system = Extensions.ToRedumpSystem(args[1].Trim('"'));
-            if (system == null)
-            {
-                message = $"{args[1]} is not a recognized system";
-                return false;
-            }
-
-            message = null;
-            return true;
-        }
-
         /// <summary>
         /// Get the MediaType enum value for a given string
         /// </summary>
@@ -298,24 +175,6 @@ namespace MPF.Frontend.Tools
             };
         }
 
-        /// <summary>
-        /// List all programs with their short usable names
-        /// </summary>
-        private static List<string> ListPrograms()
-        {
-            var programs = new List<string>();
-
-            foreach (var val in Enum.GetValues(typeof(InternalProgram)))
-            {
-                if (((InternalProgram)val!) == InternalProgram.NONE)
-                    continue;
-
-                programs.Add($"{((InternalProgram?)val).ShortName()} - {((InternalProgram?)val).LongName()}");
-            }
-
-            return programs;
-        }
-
         #endregion
 
         #region Configuration
@@ -329,12 +188,9 @@ namespace MPF.Frontend.Tools
             if (string.IsNullOrEmpty(ConfigurationPath))
                 return new Options();
 
-            // Ensure the file exists
+            // If the file does not exist
             if (!File.Exists(ConfigurationPath) || new FileInfo(ConfigurationPath).Length == 0)
-            {
-                File.Create(ConfigurationPath).Dispose();
                 return new Options();
-            }
 
             var serializer = JsonSerializer.Create();
             var stream = File.Open(ConfigurationPath, FileMode.Open, FileAccess.Read, FileShare.ReadWrite);

MPF.Frontend/Tools/PhysicalTool.cs

@@ -545,11 +545,11 @@ namespace MPF.Frontend.Tools
 
                     // Read the app.pkg header
                     using var fileStream = new FileStream(appPkgPath, FileMode.Open, FileAccess.Read);
-                    var appPkgHeaderDeserializer = new SabreTools.Serialization.Deserializers.AppPkgHeader();
+                    var appPkgHeaderDeserializer = new SabreTools.Serialization.Readers.AppPkgHeader();
                     var appPkgHeader = appPkgHeaderDeserializer.Deserialize(fileStream);
 
                     if (appPkgHeader != null)
-                        pkgInfo += $"{appPkgHeader.ContentID}" + Environment.NewLine;
+                        pkgInfo += $"{appPkgHeader.ContentID}{Environment.NewLine}";
                 }
 
                 if (pkgInfo == "")
@@ -696,11 +696,11 @@ namespace MPF.Frontend.Tools
 
                     // Read the app_sc.pkg header
                     using var fileStream = new FileStream(appPkgPath, FileMode.Open, FileAccess.Read);
-                    var appPkgHeaderDeserializer = new SabreTools.Serialization.Deserializers.AppPkgHeader();
+                    var appPkgHeaderDeserializer = new SabreTools.Serialization.Readers.AppPkgHeader();
                     var appPkgHeader = appPkgHeaderDeserializer.Deserialize(fileStream);
 
                     if (appPkgHeader != null)
-                        pkgInfo += $"{appPkgHeader.ContentID}" + Environment.NewLine;
+                        pkgInfo += $"{appPkgHeader.ContentID}{Environment.NewLine}";
                 }
 
                 if (pkgInfo == "")

MPF.Frontend/Tools/ProtectionTool.cs

@@ -72,7 +72,7 @@ namespace MPF.Frontend.Tools
         /// <param name="options">Options object that determines what to scan</param>
         /// <param name="progress">Optional progress callback</param>
         /// <returns>Set of all detected copy protections with an optional error string</returns>
-        public static async Task<ProtectionDictionary> RunProtectionScanOnPath(string path,
+        public static async Task<Dictionary<string, List<string>>> RunProtectionScanOnPath(string path,
             Options options,
             IProgress<ProtectionProgress>? progress = null)
         {
@@ -97,9 +97,6 @@ namespace MPF.Frontend.Tools
             if (found == null || found.Count == 0)
                 return [];
 
-            // Filter out any empty protections
-            found.ClearEmptyKeys();
-
             // Return the filtered set of protections
             return found;
         }
@@ -109,7 +106,7 @@ namespace MPF.Frontend.Tools
         /// </summary>
         /// <param name="protections">Dictionary of file to list of protection mappings</param>
         /// <returns>Detected protections, if any</returns>
-        public static string? FormatProtections(ProtectionDictionary? protections)
+        public static string? FormatProtections(Dictionary<string, List<string>>? protections)
         {
             // If the filtered list is empty in some way, return
             if (protections == null)
@@ -117,6 +114,9 @@ namespace MPF.Frontend.Tools
             else if (protections.Count == 0)
                 return "None found [OMIT FROM SUBMISSION]";
 
+            // Sanitize context-sensitive protections
+            protections = SanitizeContextSensitiveProtections(protections);
+
             // Get a list of distinct found protections
 #if NET20
             var protectionValues = new List<string>();
@@ -137,7 +137,7 @@ namespace MPF.Frontend.Tools
                 .Distinct()
                 .ToList();
 #endif
-
+            
             // Sanitize and join protections for writing
             string protectionString = SanitizeFoundProtections(protectionValues);
             if (string.IsNullOrEmpty(protectionString))
@@ -166,7 +166,7 @@ namespace MPF.Frontend.Tools
                 try
                 {
                     var antiModchip = new BinaryObjectScanner.Protection.PSXAntiModchip();
-                    foreach (string file in IOExtensions.SafeGetFiles(path!, "*", SearchOption.AllDirectories))
+                    foreach (string file in path!.SafeGetFiles("*", SearchOption.AllDirectories))
                     {
                         try
                         {
@@ -184,6 +184,66 @@ namespace MPF.Frontend.Tools
             });
         }
 
+        /// <summary>
+        /// Sanitize unnecessary protections where context matters
+        /// </summary>
+        /// <param name="protections">Dictionary of file to list of protection mappings</param>
+        /// <returns>Dictionary with all necessary items filtered out</returns>
+        public static Dictionary<string, List<string>> SanitizeContextSensitiveProtections(Dictionary<string, List<string>> protections)
+        {
+            // Setup the output dictionary
+            Dictionary<string, List<string>> filtered = [];
+
+            // Setup a list for keys that need additional processing
+            List<string> foundKeys = [];
+
+            // Loop through the keys and add relevant ones
+            string[] paths = [.. protections.Keys];
+            foreach (var path in paths)
+            {
+                if (!protections.TryGetValue(path, out var values) || values == null || values.Count == 0)
+                    continue;
+
+                // Always copy the values if they're valid
+                filtered[path] = values;
+
+                if (values.Exists(s => s.StartsWith("SecuROM Release Control -")))
+                    foundKeys.Add(path);
+            }
+
+            // If there are no keys found
+            if (foundKeys.Count == 0)
+                return filtered;
+
+            // Process the keys as necessary
+            foreach (var key in foundKeys)
+            {
+                // Get all matching paths
+                var matchingPaths = Array.FindAll(paths, s => s != key && s.StartsWith(key));
+                if (matchingPaths.Length == 0)
+                    continue;
+
+                // Loop through the matching paths
+                foreach (var path in matchingPaths)
+                {
+                    if (!filtered.TryGetValue(path, out var values) || values == null || values.Count == 0)
+                        continue;
+
+                    if (values.Exists(s => !s.Contains("GitHub") &&
+                        (s.Contains("SecuROM 7")
+                            || s.Contains("SecuROM 8")
+                            || s.Contains("SecuROM Content Activation")
+                            || s.Contains("SecuROM Data File Activation")
+                            || s.Contains("Unlock"))))
+                    {
+                        filtered.Remove(path);
+                    }
+                }
+            }
+
+            return filtered;
+        }
+
         /// <summary>
         /// Sanitize unnecessary protection duplication from output
         /// </summary>
@@ -200,7 +260,12 @@ namespace MPF.Frontend.Tools
             // EXCEPTIONS
             if (foundProtections.Exists(p => p.StartsWith("[Exception opening file")))
             {
-                foundProtections = foundProtections.FindAll(p => !p.StartsWith("[Exception opening file"));
+                foundProtections = foundProtections.FindAll(p => !p.StartsWith("[Exception opening file") && !p.StartsWith("[Access issue when opening file"));
+                foundProtections.Add("Exception occurred while scanning [RESCAN NEEDED]");
+            }
+            if (foundProtections.Exists(p => p.StartsWith("[Access issue when opening file")))
+            {
+                foundProtections = foundProtections.FindAll(p => !p.StartsWith("[Exception opening file") && !p.StartsWith("[Access issue when opening file"));
                 foundProtections.Add("Exception occurred while scanning [RESCAN NEEDED]");
             }
 
@@ -310,9 +375,8 @@ namespace MPF.Frontend.Tools
 
                 // Best case scenario for SafeDisc 2+: A full SafeDisc version is found in a line starting with "Macrovision Protected Application".
                 // All other SafeDisc detections can be safely scrubbed.
-                // TODO: Scrub "Macrovision Protected Application, " from before the SafeDisc version.
                 if (foundProtections.Exists(p => Regex.IsMatch(p, @"SafeDisc [0-9]\.[0-9]{2}\.[0-9]{3}", RegexOptions.Compiled)
-                        && p.StartsWith("Macrovision Protected Application")
+                        && p.Contains("Macrovision Protected Application")
                         && !p.Contains("SRV Tool APP")))
                 {
                     foundProtections = foundProtections.FindAll(p => !p.StartsWith("Macrovision Protection File"))
@@ -326,11 +390,14 @@ namespace MPF.Frontend.Tools
                         .FindAll(p => p != "SafeDisc 1/Lite")
                         .FindAll(p => p != "SafeDisc 2+")
                         .FindAll(p => p != "SafeDisc 3+ (DVD)");
+                    foundProtections = foundProtections.ConvertAll(p => p
+                            .Replace("Macrovision Protected Application, ", string.Empty)
+                            .Replace(", Macrovision Protected Application", string.Empty));
                 }
 
                 // Next best case for SafeDisc 2+: A full SafeDisc version is found from the "SafeDisc SRV Tool APP".
                 else if (foundProtections.Exists(p => Regex.IsMatch(p, @"SafeDisc [0-9]\.[0-9]{2}\.[0-9]{3}", RegexOptions.Compiled)
-                        && p.StartsWith("Macrovision Protected Application")
+                        && p.Contains("Macrovision Protected Application")
                         && p.Contains("SRV Tool APP")))
                 {
                     foundProtections = foundProtections.FindAll(p => !p.StartsWith("Macrovision Protection File"))
@@ -374,7 +441,6 @@ namespace MPF.Frontend.Tools
                 }
 
                 // Next best case for SafeDisc 1: A SafeDisc version range is found from "SECDRV.SYS".
-                // TODO: Scrub "Macrovision Security Driver {Version}" from before the SafeDisc version.
                 else if (foundProtections.Exists(p => p.StartsWith("Macrovision Security Driver")
                         && Regex.IsMatch(p, @"SafeDisc 1\.[0-9]{2}\.[0-9]{3}-[1-2]\.[0-9]{2}\.[0-9]{3}", RegexOptions.Compiled)
                         || Regex.IsMatch(p, @"SafeDisc 1\.[0-9]{2}\.[0-9]{3}$")))
@@ -386,10 +452,12 @@ namespace MPF.Frontend.Tools
                         .FindAll(p => p != "SafeDisc")
                         .FindAll(p => p != "SafeDisc 1")
                         .FindAll(p => p != "SafeDisc 1/Lite");
+                    foundProtections = foundProtections.ConvertAll(p => p.StartsWith("Macrovision Security Driver") && p.Split('/').Length > 1
+                        ? p.Split('/')[1].TrimStart()
+                        : p);
                 }
 
                 // Next best case for SafeDisc 2+: A SafeDisc version range is found from "SECDRV.SYS".
-                // TODO: Scrub "Macrovision Security Driver {Version}" from before the SafeDisc version.
                 else if (foundProtections.Exists(p => p.StartsWith("Macrovision Security Driver")))
                 {
                     foundProtections = foundProtections.FindAll(p => !p.StartsWith("Macrovision Protection File"))
@@ -401,6 +469,9 @@ namespace MPF.Frontend.Tools
                         .FindAll(p => p != "SafeDisc 1/Lite")
                         .FindAll(p => p != "SafeDisc 2+")
                         .FindAll(p => p != "SafeDisc 3+ (DVD)");
+                    foundProtections = foundProtections.ConvertAll(p => p.StartsWith("Macrovision Security Driver") && p.Split('/').Length > 1
+                        ? p.Split('/')[1].TrimStart()
+                        : p);
                 }
 
                 // Only SafeDisc Lite is found.
@@ -429,7 +500,11 @@ namespace MPF.Frontend.Tools
             }
 
             // SecuROM
-            // TODO: Figure this one out
+            if (foundProtections.Exists(p => p.StartsWith("SecuROM Release Control")))
+            {
+                foundProtections = foundProtections.FindAll(p => !p.StartsWith("SecuROM Release Control"));
+                foundProtections.Add("SecuROM Release Control");
+            }
 
             // SolidShield
             // TODO: Figure this one out

MPF.Frontend/Tools/SubmissionGenerator.cs

@@ -51,10 +51,6 @@ namespace MPF.Frontend.Tools
             IProgress<ResultEventArgs>? resultProgress = null,
             IProgress<ProtectionProgress>? protectionProgress = null)
         {
-            // Ensure the current disc combination should exist
-            if (!system.MediaTypes().Contains(mediaType))
-                return null;
-
             // Split the output path for easier use
             var outputDirectory = Path.GetDirectoryName(outputPath);
             string outputFilename = Path.GetFileName(outputPath);
@@ -77,9 +73,9 @@ namespace MPF.Frontend.Tools
             SubmissionInfo info = CreateDefaultSubmissionInfo(processor, system, mediaType, options.AddPlaceholders);
 
             // Get specific tool output handling
-            processor?.GenerateSubmissionInfo(info, mediaType, basePath, options.EnableRedumpCompatibility);
+            processor.GenerateSubmissionInfo(info, mediaType, basePath, options.EnableRedumpCompatibility);
             if (options.IncludeArtifacts)
-                info.Artifacts = processor?.GenerateArtifacts(mediaType, outputDirectory, outputFilename);
+                info.Artifacts = processor.GenerateArtifacts(mediaType, outputDirectory, outputFilename);
 
             // Add a placeholder for the logs link
             info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.LogsLink] = "[Please provide a link to your logs here]";
@@ -93,7 +89,7 @@ namespace MPF.Frontend.Tools
                 info.TracksAndWriteOffsets.ClrMameProData = null;
 
             // Add the volume label to comments, if possible or necessary
-            string? volLabels = FormatVolumeLabels(drive?.VolumeLabel, processor?.VolumeLabels);
+            string? volLabels = FormatVolumeLabels(drive?.VolumeLabel, processor.VolumeLabels);
             if (volLabels != null)
                 info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.VolumeLabel] = volLabels;
 
@@ -116,7 +112,7 @@ namespace MPF.Frontend.Tools
             {
                 resultProgress?.Report(ResultEventArgs.Success("Running copy protection scan... this might take a while!"));
 
-                ProtectionDictionary? protections = null;
+                Dictionary<string, List<string>>? protections = null;
                 try
                 {
                     if (options.ScanForProtection && drive?.Name != null)
@@ -171,9 +167,9 @@ namespace MPF.Frontend.Tools
 
             // Login to Redump, if possible
             var wc = new RedumpClient();
-            if (options.RedumpUsername != null && options.RedumpPassword != null)
+            if (!string.IsNullOrEmpty(options.RedumpUsername) && !string.IsNullOrEmpty(options.RedumpPassword))
             {
-                bool? loggedIn = await wc.Login(options.RedumpUsername, options.RedumpPassword);
+                bool? loggedIn = await wc.Login(options.RedumpUsername!, options.RedumpPassword!);
                 if (loggedIn == null)
                 {
                     resultProgress?.Report(ResultEventArgs.Failure("There was an unknown error connecting to Redump, skipping..."));
@@ -1002,7 +998,7 @@ namespace MPF.Frontend.Tools
         /// <summary>
         /// Set a comment field if it doesn't already have a value
         /// </summary>
-        private static void SetCommentFieldIfNotExists(SubmissionInfo info, SiteCode key, Drive? drive, Func<Drive?, string?> valueFunc)
+        private static void SetCommentFieldIfNotExists(SubmissionInfo info, SiteCode key, Drive? drive, System.Func<Drive?, string?> valueFunc)
         {
             // If the field has a valid value, skip
             if (CommentFieldExists(info, key, out _))
@@ -1066,7 +1062,7 @@ namespace MPF.Frontend.Tools
         /// </summary>
         /// <param name="oldDict">ProtectionDictionary to format</param>
         /// <returns>Reformatted dictionary on success, empty on error</returns>
-        private static Dictionary<string, List<string>?> ReformatProtectionDictionary(ProtectionDictionary? oldDict)
+        private static Dictionary<string, List<string>?> ReformatProtectionDictionary(Dictionary<string, List<string>>? oldDict)
         {
             // Null or empty protections return empty
             if (oldDict == null || oldDict.Count == 0)

MPF.Frontend/ViewModels/CheckDumpViewModel.cs

@@ -66,34 +66,6 @@ namespace MPF.Frontend.ViewModels
         }
         private bool _systemTypeComboBoxEnabled;
 
-        /// <summary>
-        /// Currently selected media type value
-        /// </summary>
-        public MediaType? CurrentMediaType
-        {
-            get => _currentMediaType;
-            set
-            {
-                _currentMediaType = value;
-                TriggerPropertyChanged(nameof(CurrentMediaType));
-            }
-        }
-        private MediaType? _currentMediaType;
-
-        /// <summary>
-        /// Indicates the status of the media type combo box
-        /// </summary>
-        public bool MediaTypeComboBoxEnabled
-        {
-            get => _mediaTypeComboBoxEnabled;
-            set
-            {
-                _mediaTypeComboBoxEnabled = value;
-                TriggerPropertyChanged(nameof(MediaTypeComboBoxEnabled));
-            }
-        }
-        private bool _mediaTypeComboBoxEnabled;
-
         /// <summary>
         /// Currently provided input path
         /// </summary>
@@ -229,20 +201,6 @@ namespace MPF.Frontend.ViewModels
 
         #region List Properties
 
-        /// <summary>
-        /// Current list of supported media types
-        /// </summary>
-        public List<Element<MediaType>>? MediaTypes
-        {
-            get => _mediaTypes;
-            set
-            {
-                _mediaTypes = value;
-                TriggerPropertyChanged(nameof(MediaTypes));
-            }
-        }
-        private List<Element<MediaType>>? _mediaTypes;
-
         /// <summary>
         /// Current list of supported system profiles
         /// </summary>
@@ -287,16 +245,13 @@ namespace MPF.Frontend.ViewModels
             SystemTypeComboBoxEnabled = true;
             InputPathTextBoxEnabled = true;
             InputPathBrowseButtonEnabled = true;
-            MediaTypeComboBoxEnabled = true;
             DumpingProgramComboBoxEnabled = true;
             CheckDumpButtonEnabled = false;
             CancelButtonEnabled = true;
 
-            MediaTypes = [];
             Systems = RedumpSystemComboBoxItem.GenerateElements();
             InternalPrograms = [];
 
-            PopulateMediaType();
             PopulateInternalPrograms();
             EnableEventHandlers();
         }
@@ -327,15 +282,6 @@ namespace MPF.Frontend.ViewModels
         /// Change the currently selected system
         /// </summary>
         public void ChangeSystem()
-        {
-            PopulateMediaType();
-            CheckDumpButtonEnabled = ShouldEnableCheckDumpButton();
-        }
-
-        /// <summary>
-        /// Change the currently selected media type
-        /// </summary>
-        public void ChangeMediaType()
         {
             CheckDumpButtonEnabled = ShouldEnableCheckDumpButton();
         }
@@ -369,7 +315,6 @@ namespace MPF.Frontend.ViewModels
             InputPathTextBoxEnabled = true;
             InputPathBrowseButtonEnabled = true;
             DumpingProgramComboBoxEnabled = true;
-            PopulateMediaType();
             CheckDumpButtonEnabled = ShouldEnableCheckDumpButton();
             CancelButtonEnabled = true;
         }
@@ -382,7 +327,6 @@ namespace MPF.Frontend.ViewModels
             SystemTypeComboBoxEnabled = false;
             InputPathTextBoxEnabled = false;
             InputPathBrowseButtonEnabled = false;
-            MediaTypeComboBoxEnabled = false;
             DumpingProgramComboBoxEnabled = false;
             CheckDumpButtonEnabled = false;
             CancelButtonEnabled = false;
@@ -392,35 +336,6 @@ namespace MPF.Frontend.ViewModels
 
         #region Population
 
-        /// <summary>
-        /// Populate media type according to system type
-        /// </summary>
-        private void PopulateMediaType()
-        {
-            // Disable other UI updates
-            bool cachedCanExecuteSelectionChanged = CanExecuteSelectionChanged;
-            DisableEventHandlers();
-
-            if (CurrentSystem != null)
-            {
-                var mediaTypeValues = CurrentSystem.MediaTypes();
-                int index = mediaTypeValues.FindIndex(m => m == CurrentMediaType);
-
-                MediaTypes = mediaTypeValues.ConvertAll(m => new Element<MediaType>(m ?? MediaType.NONE));
-                MediaTypeComboBoxEnabled = MediaTypes.Count > 1;
-                CurrentMediaType = (index > -1 ? MediaTypes[index] : MediaTypes[0]);
-            }
-            else
-            {
-                MediaTypeComboBoxEnabled = false;
-                MediaTypes = null;
-                CurrentMediaType = null;
-            }
-
-            // Reenable event handlers, if necessary
-            if (cachedCanExecuteSelectionChanged) EnableEventHandlers();
-        }
-
         /// <summary>
         /// Populate media type according to system type
         /// </summary>
@@ -451,7 +366,7 @@ namespace MPF.Frontend.ViewModels
 
         private bool ShouldEnableCheckDumpButton()
         {
-            return CurrentSystem != null && CurrentMediaType != null && !string.IsNullOrEmpty(InputPath);
+            return CurrentSystem != null && !string.IsNullOrEmpty(InputPath);
         }
 
         /// <summary>
@@ -478,13 +393,13 @@ namespace MPF.Frontend.ViewModels
         /// Performs MPF.Check functionality
         /// </summary>
         /// <returns>An error message if failed, otherwise string.Empty/null</returns>
-        public async Task<string?> CheckDump(ProcessUserInfoDelegate processUserInfo)
+        public async Task<ResultEventArgs> CheckDump(ProcessUserInfoDelegate processUserInfo)
         {
             if (string.IsNullOrEmpty(InputPath))
-                return "Invalid Input path";
+                return ResultEventArgs.Failure("Invalid Input path");
 
             if (!File.Exists(InputPath!.Trim('"')))
-                return "Input Path is not a valid file";
+                return ResultEventArgs.Failure("Input Path is not a valid file");
 
             // Disable UI while Check is running
             DisableUIElements();
@@ -507,7 +422,6 @@ namespace MPF.Frontend.ViewModels
 
             // Finally, attempt to do the output dance
             var result = await env.VerifyAndSaveDumpOutput(
-                mediaType: CurrentMediaType,
                 resultProgress: resultProgress,
                 protectionProgress: protectionProgress,
                 processUserInfo: processUserInfo);
@@ -517,7 +431,7 @@ namespace MPF.Frontend.ViewModels
             if (cachedCanExecuteSelectionChanged)
                 EnableEventHandlers();
 
-            return result.Message;
+            return result;
         }
 
         /// <summary>

MPF.Frontend/ViewModels/MainViewModel.cs

@@ -674,7 +674,7 @@ namespace MPF.Frontend.ViewModels
 
                 // Set the selected index
                 CurrentDrive = (index != -1 ? Drives[index] : Drives[0]);
-                Status = "Valid drive found! Choose your Media Type";
+                Status = "Valid drive found!";
                 CopyProtectScanButtonEnabled = true;
 
                 // Get the current system type
@@ -1213,14 +1213,8 @@ namespace MPF.Frontend.ViewModels
             if (defaultMediaType == MediaType.NONE)
                 defaultMediaType = MediaType.CDROM;
 
-            // If we're skipping detection, set the default value
-            if (Options.SkipMediaTypeDetection)
-            {
-                VerboseLogLn($"Media type detection disabled, defaulting to {defaultMediaType.LongName()}.");
-                CurrentMediaType = defaultMediaType;
-            }
             // If the drive is marked active, try to read from it
-            else if (CurrentDrive.MarkedActive)
+            if (CurrentDrive.MarkedActive)
             {
                 VerboseLog($"Trying to detect media type for drive {CurrentDrive.Name} [{CurrentDrive.DriveFormat}] using size and filesystem.. ");
                 MediaType? detectedMediaType = CurrentDrive.GetMediaType(CurrentSystem);
@@ -1238,8 +1232,7 @@ namespace MPF.Frontend.ViewModels
                     CurrentMediaType = detectedMediaType;
                 }
             }
-
-            // All other cases, just use the default
+            // Otherwise just use the default
             else
             {
                 VerboseLogLn($"Drive marked as empty, defaulting to {defaultMediaType.LongName()}.");
@@ -1366,6 +1359,10 @@ namespace MPF.Frontend.ViewModels
         /// </summary>
         public void EnsureMediaInformation()
         {
+            // If the drive list is empty, ignore updates
+            if (Drives.Count == 0)
+                return;
+
             // Get the current environment information
             _environment = DetermineEnvironment();
 
@@ -1616,7 +1613,7 @@ namespace MPF.Frontend.ViewModels
             try
             {
                 if (Directory.Exists(Path.Combine(drive.Name, "$SystemUpdate"))
-                    && IOExtensions.SafeGetFiles(Path.Combine(drive.Name, "$SystemUpdate")).Length > 0
+                    && Path.Combine(drive.Name, "$SystemUpdate").SafeGetFiles().Length > 0
                     && drive.TotalSize <= 500_000_000)
                 {
                     return RedumpSystem.MicrosoftXbox360;
@@ -1639,7 +1636,7 @@ namespace MPF.Frontend.ViewModels
                         if (!File.Exists(catalogjs))
                             return RedumpSystem.MicrosoftXboxOne;
 
-                        SabreTools.Models.Xbox.Catalog? catalog = SabreTools.Serialization.Deserializers.Catalog.DeserializeFile(catalogjs);
+                        SabreTools.Data.Models.Xbox.Catalog? catalog = new SabreTools.Serialization.Readers.Catalog().Deserialize(catalogjs);
                         if (catalog != null && catalog.Version != null && catalog.Packages != null)
                         {
                             if (!double.TryParse(catalog.Version, out double version))
@@ -1665,6 +1662,12 @@ namespace MPF.Frontend.ViewModels
             }
             catch { }
 
+            // Playmaji Polymega
+            if (File.Exists(Path.Combine(drive.Name, "Get Polymega App.url")))
+            {
+                return RedumpSystem.PlaymajiPolymega;
+            }
+
             try
             {
                 // Sega Saturn / Sega Dreamcast / Sega Mega-CD / Sega-CD
@@ -1825,13 +1828,13 @@ namespace MPF.Frontend.ViewModels
             try
             {
                 if (Directory.Exists(Path.Combine(drive.Name, "AUDIO_TS"))
-                    && IOExtensions.SafeGetFiles(Path.Combine(drive.Name, "AUDIO_TS")).Length > 0)
+                    && Path.Combine(drive.Name, "AUDIO_TS").SafeGetFiles().Length > 0)
                 {
                     return RedumpSystem.DVDAudio;
                 }
 
                 else if (Directory.Exists(Path.Combine(drive.Name, "VIDEO_TS"))
-                    && IOExtensions.SafeGetFiles(Path.Combine(drive.Name, "VIDEO_TS")).Length > 0)
+                    && Path.Combine(drive.Name, "VIDEO_TS").SafeGetFiles().Length > 0)
                 {
                     return RedumpSystem.DVDVideo;
                 }
@@ -1842,7 +1845,7 @@ namespace MPF.Frontend.ViewModels
             try
             {
                 if (Directory.Exists(Path.Combine(drive.Name, "HVDVD_TS"))
-                    && IOExtensions.SafeGetFiles(Path.Combine(drive.Name, "HVDVD_TS")).Length > 0)
+                    && Path.Combine(drive.Name, "HVDVD_TS").SafeGetFiles().Length > 0)
                 {
                     return RedumpSystem.HDDVDVideo;
                 }
@@ -1853,7 +1856,7 @@ namespace MPF.Frontend.ViewModels
             try
             {
                 if (Directory.Exists(Path.Combine(drive.Name, "PHOTO_CD"))
-                    && IOExtensions.SafeGetFiles(Path.Combine(drive.Name, "PHOTO_CD")).Length > 0)
+                    && Path.Combine(drive.Name, "PHOTO_CD").SafeGetFiles().Length > 0)
                 {
                     return RedumpSystem.PhotoCD;
                 }
@@ -1864,7 +1867,7 @@ namespace MPF.Frontend.ViewModels
             try
             {
                 if (Directory.Exists(Path.Combine(drive.Name, "VCD"))
-                    && IOExtensions.SafeGetFiles(Path.Combine(drive.Name, "VCD")).Length > 0)
+                    && Path.Combine(drive.Name, "VCD").SafeGetFiles().Length > 0)
                 {
                     return RedumpSystem.VideoCD;
                 }
@@ -2100,6 +2103,10 @@ namespace MPF.Frontend.ViewModels
         /// </summary>
         public void SetSupportedDriveSpeed()
         {
+            // Skip trying to set speeds if no drives
+            if (Drives.Count == 0)
+                return;
+
             // Set the drive speed list that's appropriate
             DriveSpeeds = InterfaceConstants.GetSpeedsForMediaType(CurrentMediaType);
             VerboseLogLn($"Supported media speeds: {string.Join(", ", [.. DriveSpeeds.ConvertAll(ds => ds.ToString())])}");
@@ -2113,8 +2120,7 @@ namespace MPF.Frontend.ViewModels
         /// </summary>
         private bool ShouldEnableDumpingButton()
         {
-            return Drives != null
-                && Drives.Count > 0
+            return Drives.Count > 0
                 && CurrentSystem != null
                 && CurrentMediaType != null
                 && ProgramSupportsMedia();
@@ -2190,23 +2196,6 @@ namespace MPF.Frontend.ViewModels
             // Force an internal drive refresh in case the user entered things manually
             _environment.RefreshDrive();
 
-            // If still in custom parameter mode, check that users meant to continue or not
-            if (ParametersCheckBoxEnabled == false && _displayUserMessage != null)
-            {
-                bool? result = _displayUserMessage("Custom Changes", "It looks like you have custom parameters that have not been saved. Would you like to dump with these custom parameters?", 2, true);
-                if (result == true)
-                {
-                    ParametersCheckBoxEnabled = true;
-                    ProcessCustomParameters();
-                }
-                else
-                {
-                    // Re-allow quick exiting
-                    AskBeforeQuit = false;
-                    return;
-                }
-            }
-
             try
             {
                 // Run pre-dumping validation checks
@@ -2256,10 +2245,12 @@ namespace MPF.Frontend.ViewModels
                 if (result)
                 {
                     result = await _environment.VerifyAndSaveDumpOutput(
-                        mediaType: CurrentMediaType,
                         resultProgress: resultProgress,
                         protectionProgress: protectionProgress,
                         processUserInfo: _processUserInfo);
+
+                    if (!result)
+                        ErrorLogLn(result.Message);
                 }
                 else
                 {
@@ -2304,6 +2295,7 @@ namespace MPF.Frontend.ViewModels
                 MediaScanButtonEnabled = false;
                 UpdateVolumeLabelEnabled = false;
                 CopyProtectScanButtonEnabled = false;
+                StartStopButtonEnabled = false;
             }
             else
             {
@@ -2324,6 +2316,7 @@ namespace MPF.Frontend.ViewModels
                 MediaScanButtonEnabled = true;
                 UpdateVolumeLabelEnabled = true;
                 CopyProtectScanButtonEnabled = true;
+                StartStopButtonEnabled = true;
             }
         }
 

MPF.Frontend/ViewModels/OptionsViewModel.cs

@@ -1,6 +1,7 @@
 using System.Collections.Generic;
 using System.ComponentModel;
 using MPF.Frontend.ComboBoxItems;
+using LogCompression = MPF.Processors.LogCompression;
 using RedumperDriveType = MPF.ExecutionContexts.Redumper.DriveType;
 using RedumperReadMethod = MPF.ExecutionContexts.Redumper.ReadMethod;
 using RedumperSectorOrder = MPF.ExecutionContexts.Redumper.SectorOrder;
@@ -50,6 +51,11 @@ namespace MPF.Frontend.ViewModels
         /// </summary>
         public static List<Element<InternalProgram>> InternalPrograms => PopulateInternalPrograms();
 
+        /// <summary>
+        /// List of available log compression methods
+        /// </summary>
+        public static List<Element<LogCompression>> LogCompressions => PopulateLogCompressions();
+
         /// <summary>
         /// Current list of supported Redumper read methods
         /// </summary>
@@ -99,6 +105,16 @@ namespace MPF.Frontend.ViewModels
             return internalPrograms.ConvertAll(ip => new Element<InternalProgram>(ip));
         }
 
+        /// <summary>
+        /// Get a complete list of supported log compression methods
+        /// </summary>
+        /// <returns></returns>
+        private static List<Element<LogCompression>> PopulateLogCompressions()
+        {
+            var logCompressions = new List<LogCompression> { LogCompression.DeflateDefault, LogCompression.DeflateMaximum, LogCompression.Zstd19 };
+            return logCompressions.ConvertAll(lc => new Element<LogCompression>(lc));
+        }
+
         /// <summary>
         /// Get a complete list of supported redumper drive read methods
         /// </summary>

MPF.Processors.Test/BaseProcessorTests.cs

@@ -1,6 +1,6 @@
 using System;
 using System.IO;
-using SabreTools.Models.Logiqx;
+using SabreTools.Data.Models.Logiqx;
 using Xunit;
 
 namespace MPF.Processors.Test

MPF.Processors.Test/DiscImageCreatorTests.cs

@@ -1,7 +1,7 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
-using SabreTools.Models.Logiqx;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.RedumpLib.Data;
 using Xunit;
 

MPF.Processors.Test/MPF.Processors.Test.csproj

@@ -1,7 +1,7 @@
 <Project Sdk="Microsoft.NET.Sdk">
 
     <PropertyGroup>
-        <TargetFrameworks>net6.0;net8.0;net9.0</TargetFrameworks>
+        <TargetFrameworks>net8.0;net9.0</TargetFrameworks>
         <CheckEolTargetFramework>false</CheckEolTargetFramework>
         <LangVersion>latest</LangVersion>
         <Nullable>enable</Nullable>
@@ -24,13 +24,13 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="Microsoft.CodeCoverage" Version="17.13.0" />
-        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.13.0" />
-        <PackageReference Include="Newtonsoft.Json" Version="13.0.3" />
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="Microsoft.CodeCoverage" Version="17.14.1" />
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.14.1" />
+        <PackageReference Include="Newtonsoft.Json" Version="13.0.4" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
         <PackageReference Include="xunit" Version="2.9.3" />
         <PackageReference Include="xunit.abstractions" Version="2.0.3" />
-        <PackageReference Include="xunit.analyzers" Version="1.21.0" />
+        <PackageReference Include="xunit.analyzers" Version="1.24.0" />
         <PackageReference Include="xunit.assert" Version="2.9.3" />
         <PackageReference Include="xunit.core" Version="2.9.3" />
         <PackageReference Include="xunit.extensibility.core" Version="2.9.3" />
@@ -39,7 +39,7 @@
             <PrivateAssets>all</PrivateAssets>
             <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
         </PackageReference>
-        <PackageReference Include="xunit.runner.visualstudio" Version="3.0.2">
+        <PackageReference Include="xunit.runner.visualstudio" Version="3.1.5">
             <PrivateAssets>all</PrivateAssets>
             <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
         </PackageReference>

MPF.Processors.Test/ProcessingToolTests.cs

@@ -1,7 +1,7 @@
 using System;
 using System.IO;
-using SabreTools.Models.Logiqx;
-using SabreTools.Models.PIC;
+using SabreTools.Data.Models.Logiqx;
+using SabreTools.Data.Models.PIC;
 using SabreTools.RedumpLib.Data;
 using Xunit;
 
@@ -471,12 +471,9 @@ namespace MPF.Processors.Test
         [Theory]
         [InlineData(null, null)]
         [InlineData("", null)]
-        [InlineData("GAME", DiscCategory.Games)]
-        [InlineData("game", DiscCategory.Games)]
-        [InlineData("VIDEO", DiscCategory.Video)]
-        [InlineData("video", DiscCategory.Video)]
-        [InlineData("AUDIO", DiscCategory.Audio)]
-        [InlineData("audio", DiscCategory.Audio)]
+        [InlineData("(GAME)", DiscCategory.Games)]
+        [InlineData("(VIDEO)", DiscCategory.Video)]
+        [InlineData("(AUDIO)", DiscCategory.Audio)]
         [InlineData("INVALID", null)]
         public void GetUMDCategoryTest(string? category, DiscCategory? expected)
         {

MPF.Processors.Test/RedumperTests.cs

@@ -103,7 +103,7 @@ namespace MPF.Processors.Test
             var processor = new Redumper(RedumpSystem.IBMPCcompatible);
 
             var actual = processor.GetOutputFiles(MediaType.CDROM, outputDirectory, outputFilename);
-            Assert.Equal(16, actual.Count);
+            Assert.Equal(19, actual.Count);
         }
 
         [Fact]
@@ -125,7 +125,7 @@ namespace MPF.Processors.Test
             var processor = new Redumper(RedumpSystem.IBMPCcompatible);
 
             var actual = processor.GetOutputFiles(MediaType.HDDVD, outputDirectory, outputFilename);
-            Assert.Equal(10, actual.Count);
+            Assert.Equal(12, actual.Count);
         }
 
         [Fact]
@@ -136,7 +136,7 @@ namespace MPF.Processors.Test
             var processor = new Redumper(RedumpSystem.IBMPCcompatible);
 
             var actual = processor.GetOutputFiles(MediaType.BluRay, outputDirectory, outputFilename);
-            Assert.Equal(10, actual.Count);
+            Assert.Equal(12, actual.Count);
         }
 
         [Fact]
@@ -161,7 +161,7 @@ namespace MPF.Processors.Test
             string outputFilename = string.Empty;
             var processor = new Redumper(RedumpSystem.IBMPCcompatible);
             var actual = processor.FoundAllFiles(MediaType.CDROM, outputDirectory, outputFilename);
-            Assert.Equal(8, actual.Count);
+            Assert.Equal(7, actual.Count);
         }
 
         [Fact]

MPF.Processors.Test/TestData/UmdImageCreator/UMD/test_disc.txt

@@ -1,7 +1,21 @@
 << GetUMDAuxInfo >>
-TITLE title
-DISC_ID serial
-DISC_VERSION version
-pspUmdTypes GAME
-L0 length 12345
-FileSize: 12345
+disc0:/PSP_GAME/PARAM.SFO
+	magic: PSF
+	version: 1.01
+	BOOTABLE: 1
+	CATEGORY: UG
+	DISC_ID: ABCD12345
+	DISC_NUMBER: 1
+	DISC_TOTAL: 1
+	DISC_VERSION: 1.01
+	PARENTAL_LEVEL: 1
+	PSP_SYSTEM_VER: 1.00
+	REGION: 32768
+	TITLE: title
+
+pspUmdTypes: 0x10 (GAME)
+  L0 length: 442560 (0x6c0c0)
+  L1 length: 276096 (0x43680)
+  ---------------------------
+      Total: 718656 (0xaf740)
+   FileSize: 1471807488 (0x57ba0000)

MPF.Processors.Test/UmdImageCreatorTests.cs

@@ -291,10 +291,10 @@ namespace MPF.Processors.Test
         {
             string? expectedTitle = "title";
             DiscCategory? expectedCategory = DiscCategory.Games;
-            string? expectedSerial = "seri-al";
-            string? expectedVersion = "version";
-            string? expectedLayer = "12345";
-            long expectedSize = 12345;
+            string? expectedSerial = "ABCD-12345";
+            string? expectedVersion = "1.01";
+            string? expectedLayer = "442560";
+            long expectedSize = 1471807488;
 
             string disc = Path.Combine(Environment.CurrentDirectory, "TestData", "UmdImageCreator", "UMD", "test_disc.txt");
             bool actual = UmdImageCreator.GetUMDAuxInfo(disc,

MPF.Processors/Aaru.cs

@@ -5,8 +5,8 @@ using System.Text;
 using System.Xml;
 using System.Xml.Schema;
 using System.Xml.Serialization;
-using SabreTools.Models.CueSheets;
-using SabreTools.Models.Logiqx;
+using SabreTools.Data.Models.CueSheets;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
 using Schemas;
@@ -409,7 +409,7 @@ namespace MPF.Processors
             cueSheet.Files = [.. cueFiles];
             if (cueSheet != null && cueSheet != default)
             {
-                var ms = SabreTools.Serialization.Serializers.CueSheet.SerializeStream(cueSheet);
+                var ms = new SabreTools.Serialization.Writers.CueSheet().SerializeStream(cueSheet);
                 if (ms == null)
                     return null;
 

MPF.Processors/BaseProcessor.cs

@@ -1,13 +1,17 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
-#if NET452_OR_GREATER || NETCOREAPP
-using System.IO.Compression;
-#endif
 using System.Text;
 using SabreTools.Hashing;
-using SabreTools.Models.Logiqx;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.RedumpLib.Data;
+#if NET462_OR_GREATER || NETCOREAPP
+using SharpCompress.Archives;
+using SharpCompress.Archives.Zip;
+using SharpCompress.Common;
+using SharpCompress.Compressors.Deflate;
+using SharpCompress.Writers.Zip;
+#endif
 
 namespace MPF.Processors
 {
@@ -73,6 +77,7 @@ namespace MPF.Processors
         /// Compress log files to save space
         /// </summary>
         /// <param name="mediaType">Media type for controlling expected file sets</param>
+        /// <param name="logCompression">Compression type to use for logs</param>
         /// <param name="outputDirectory">Output folder to use as the base path</param>
         /// <param name="outputFilename">Output filename to use as the base path</param>
         /// <param name="filenameSuffix">Output filename to use as the base path</param>
@@ -80,12 +85,13 @@ namespace MPF.Processors
         /// <returns>True if the process succeeded, false otherwise</returns>
         /// <remarks>Assumes filename has an extension</remarks>
         public bool CompressLogFiles(MediaType? mediaType,
+            LogCompression logCompression,
             string? outputDirectory,
             string outputFilename,
             string? filenameSuffix,
             out string status)
         {
-#if NET20 || NET35 || NET40
+#if NET20 || NET35 || NET40 || NET452
             status = "Log compression is not available for this framework version";
             return false;
 #else
@@ -108,26 +114,46 @@ namespace MPF.Processors
                 return true;
             }
 
-            // If the file already exists, we want to delete the old one
-            try
+            // If the file already exists, change the archive name
+            if (File.Exists(archiveName))
             {
-                if (File.Exists(archiveName))
-                    File.Delete(archiveName);
-            }
-            catch
-            {
-                status = "Could not delete old archive!";
-                return false;
+                string now = DateTime.Now.ToString("yyyyMMdd-HHmmss");
+                archiveName = $"{basePath}_logs_{now}.zip";
             }
 
             // Add the log files to the archive and delete the uncompressed file after
             ZipArchive? zf = null;
+            bool disposed = false;
             try
             {
-                zf = ZipFile.Open(archiveName, ZipArchiveMode.Create);
+                zf = ZipArchive.Create();
 
-                _ = AddToArchive(zf, zippableFiles, outputDirectory, true);
-                _ = AddToArchive(zf, generatedFiles, outputDirectory, false);
+                List<string> successful = AddToArchive(zf, zippableFiles, outputDirectory);
+                _ = AddToArchive(zf, generatedFiles, outputDirectory);
+
+                switch (logCompression)
+                {
+                    case LogCompression.DeflateMaximum:
+                        zf.SaveTo(archiveName, new ZipWriterOptions(CompressionType.Deflate, CompressionLevel.BestCompression) { UseZip64 = true });
+                        break;
+                    case LogCompression.Zstd19:
+                        zf.SaveTo(archiveName, new ZipWriterOptions(CompressionType.ZStandard, (CompressionLevel)19) { UseZip64 = true });
+                        break;
+                    case LogCompression.DeflateDefault:
+                    default:
+                        zf.SaveTo(archiveName, new ZipWriterOptions(CompressionType.Deflate, CompressionLevel.Default) { UseZip64 = true });
+                        break;
+                }
+
+                // Dispose the archive
+                zf?.Dispose();
+                disposed = true;
+
+                // Delete all successful files
+                foreach (string file in successful)
+                {
+                    try { File.Delete(file); } catch { }
+                }
 
                 status = "Compression complete!";
                 return true;
@@ -139,7 +165,8 @@ namespace MPF.Processors
             }
             finally
             {
-                zf?.Dispose();
+                if (!disposed)
+                    zf?.Dispose();
             }
 #endif
         }
@@ -203,17 +230,17 @@ namespace MPF.Processors
 
             // Check for the log file
             bool logArchiveExists = false;
-#if NET452_OR_GREATER || NETCOREAPP
+#if NET462_OR_GREATER || NETCOREAPP
             ZipArchive? logArchive = null;
 #endif
             if (File.Exists($"{basePath}_logs.zip"))
             {
                 logArchiveExists = true;
-#if NET452_OR_GREATER || NETCOREAPP
+#if NET462_OR_GREATER || NETCOREAPP
                 try
                 {
                     // Try to open the archive
-                    logArchive = ZipFile.OpenRead($"{basePath}_logs.zip");
+                    logArchive = ZipArchive.Open($"{basePath}_logs.zip");
                 }
                 catch
                 {
@@ -241,7 +268,7 @@ namespace MPF.Processors
                     continue;
                 }
 
-#if NET20 || NET35 || NET40
+#if NET20 || NET35 || NET40 || NET452
                 // Assume the zipfile has the file in it
                 continue;
 #else
@@ -254,7 +281,7 @@ namespace MPF.Processors
 #endif
             }
 
-#if NET452_OR_GREATER || NETCOREAPP
+#if NET462_OR_GREATER || NETCOREAPP
             // Close the log archive, if it exists
             logArchive?.Dispose();
 #endif
@@ -312,67 +339,75 @@ namespace MPF.Processors
             if (outputFiles.Count == 0)
                 return [];
 
-            // Create the artifacts dictionary
-            var artifacts = new Dictionary<string, string>();
-
-            // Only try to create artifacts for files that exist
-            foreach (var outputFile in outputFiles)
+            try
             {
-                // Skip non-artifact files
-                if (!outputFile.IsArtifact || outputFile.ArtifactKey == null)
-                    continue;
+                // Create the artifacts dictionary
+                var artifacts = new Dictionary<string, string>();
 
-                // Skip non-existent files
-                if (!outputFile.Exists(outputDirectory ?? string.Empty))
-                    continue;
-
-                // Skip non-existent files
-                foreach (var filePath in outputFile.GetPaths(outputDirectory ?? string.Empty))
+                // Only try to create artifacts for files that exist
+                foreach (var outputFile in outputFiles)
                 {
-                    // Get binary artifacts as a byte array
-                    if (outputFile.IsBinaryArtifact)
-                    {
-                        byte[] data = File.ReadAllBytes(filePath);
-                        string str = Convert.ToBase64String(data);
-                        artifacts[outputFile.ArtifactKey] = str;
-                    }
-                    else
-                    {
-                        string? data = ProcessingTool.GetFullFile(filePath);
-                        string str = ProcessingTool.GetBase64(data) ?? string.Empty;
-                        artifacts[outputFile.ArtifactKey] = str;
-                    }
+                    // Skip non-artifact files
+                    if (!outputFile.IsArtifact || outputFile.ArtifactKey == null)
+                        continue;
 
-                    break;
+                    // Skip non-existent files
+                    if (!outputFile.Exists(outputDirectory ?? string.Empty))
+                        continue;
+
+                    // Skip non-existent files
+                    foreach (var filePath in outputFile.GetPaths(outputDirectory ?? string.Empty))
+                    {
+                        // Get binary artifacts as a byte array
+                        if (outputFile.IsBinaryArtifact)
+                        {
+                            byte[] data = File.ReadAllBytes(filePath);
+                            string str = Convert.ToBase64String(data);
+                            artifacts[outputFile.ArtifactKey] = str;
+                        }
+                        else
+                        {
+                            string? data = ProcessingTool.GetFullFile(filePath);
+                            string str = ProcessingTool.GetBase64(data) ?? string.Empty;
+                            artifacts[outputFile.ArtifactKey] = str;
+                        }
+
+                        break;
+                    }
                 }
-            }
 
-            return artifacts;
+                return artifacts;
+            }
+            catch
+            {
+                // Any issues shouldn't stop processing
+                return [];
+            }
         }
 
-#if NET452_OR_GREATER || NETCOREAPP
+#if NET462_OR_GREATER || NETCOREAPP
         /// <summary>
         /// Try to add a set of files to an existing archive
         /// </summary>
         /// <param name="archive">Archive to add the file to</param>
         /// <param name="files">Full path to a set of existing files</param>
         /// <param name="outputDirectory">Directory that the existing files live in</param>
-        /// <param name="delete">Indicates if the files should be deleted after adding</param>
-        /// <returns>True if all files were added successfully, false otherwise</returns>
-        private static bool AddToArchive(ZipArchive archive, List<string> files, string? outputDirectory, bool delete)
+        /// <returns>List of all files that were successfully added</returns>
+        private static List<string> AddToArchive(ZipArchive archive, List<string> files, string? outputDirectory)
         {
             // An empty list means success
             if (files.Count == 0)
-                return true;
+                return [];
 
             // Loop through and add all files
-            bool allAdded = true;
+            List<string> added = [];
             foreach (string file in files)
             {
-                allAdded &= AddToArchive(archive, file, outputDirectory, delete);
+                if (AddToArchive(archive, file, outputDirectory))
+                    added.Add(file);
             }
 
-            return allAdded;
+            return added;
         }
 
         /// <summary>
@@ -381,9 +416,8 @@ namespace MPF.Processors
         /// <param name="archive">Archive to add the file to</param>
         /// <param name="file">Full path to an existing file</param>
         /// <param name="outputDirectory">Directory that the existing file lives in</param>
-        /// <param name="delete">Indicates if the file should be deleted after adding</param>
         /// <returns>True if the file was added successfully, false otherwise</returns>
-        private static bool AddToArchive(ZipArchive archive, string file, string? outputDirectory, bool delete)
+        private static bool AddToArchive(ZipArchive archive, string file, string? outputDirectory)
         {
             // Check if the file exists
             if (!File.Exists(file))
@@ -400,23 +434,13 @@ namespace MPF.Processors
             // Create and add the entry
             try
             {
-#if NETFRAMEWORK || NETCOREAPP3_1 || NET5_0
-                archive.CreateEntryFromFile(file, entryName, CompressionLevel.Optimal);
-#else
-                archive.CreateEntryFromFile(file, entryName, CompressionLevel.SmallestSize);
-#endif
+                archive.AddEntry(entryName, file);
             }
             catch
             {
                 return false;
             }
 
-            // Try to delete the file if requested
-            if (delete)
-            {
-                try { File.Delete(file); } catch { }
-            }
-
             return true;
         }
 #endif

MPF.Processors/CleanRip.cs

@@ -1,8 +1,8 @@
 using System.Collections.Generic;
 using System.IO;
 using System.Text;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.Hashing;
-using SabreTools.Models.Logiqx;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
 
@@ -82,7 +82,7 @@ namespace MPF.Processors
                     | OutputFileFlags.Binary
                     | OutputFileFlags.Zippable,
                     "bca"),
-                new($"{outputFilename}.iso", OutputFileFlags.Required),
+                new([$"{outputFilename}.iso", $"{outputFilename}.part0.iso"], OutputFileFlags.Required),
 
                 new($"{outputFilename}-dumpinfo.txt", OutputFileFlags.Required
                     | OutputFileFlags.Artifact

MPF.Processors/CustomOutputFile.cs

@@ -1,8 +1,8 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
-#if NET452_OR_GREATER || NETCOREAPP
-using System.IO.Compression;
+#if NET462_OR_GREATER || NETCOREAPP
+using SharpCompress.Archives.Zip;
 #endif
 
 namespace MPF.Processors
@@ -78,7 +78,7 @@ namespace MPF.Processors
             return false;
         }
 
-#if NET452_OR_GREATER || NETCOREAPP
+#if NET462_OR_GREATER || NETCOREAPP
         /// <inheritdoc/>
         public override bool Exists(ZipArchive? archive)
         {

MPF.Processors/DiscImageCreator.cs

@@ -5,7 +5,7 @@ using System.IO;
 using System.Linq;
 #endif
 using System.Text.RegularExpressions;
-using SabreTools.Models.Logiqx;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
 
@@ -289,7 +289,7 @@ namespace MPF.Processors
                 case RedumpSystem.SonyElectronicBook:
                     info.CopyProtection!.SecuROMData = GetSecuROMData($"{basePath}_subIntention.txt", out SecuROMScheme secuROMScheme) ?? string.Empty;
                     if (secuROMScheme == SecuROMScheme.Unknown)
-                        info.CommonDiscInfo!.Comments = "Warning: Incorrect SecuROM sector count" + Environment.NewLine;
+                        info.CommonDiscInfo!.Comments = $"Warning: Incorrect SecuROM sector count{Environment.NewLine}";
 
                     // Needed for some odd copy protections
                     info.CopyProtection!.Protection = GetDVDProtection($"{basePath}_CSSKey.txt", $"{basePath}_disc.txt", false) ?? string.Empty;

MPF.Processors/Enumerations.cs

@@ -1,5 +1,26 @@
 namespace MPF.Processors
 {
+        /// <summary>
+    /// Indicates the type of compression used for logs
+    /// </summary>
+    public enum LogCompression
+    {
+        /// <summary>
+        /// PKZIP using DEFLATE level 5
+        /// </summary>
+        DeflateDefault,
+
+        /// <summary>
+        /// PKZIP using DEFLATE level 9
+        /// </summary>
+        DeflateMaximum,
+        
+        /// <summary>
+        /// PKZIP using Zstd level 19
+        /// </summary>
+        Zstd19,
+    }
+
     /// <summary>
     /// Enum for SecuROM scheme type
     /// </summary>

MPF.Processors/Generic.cs

@@ -1,8 +1,8 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.Hashing;
-using SabreTools.Models.Logiqx;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
 

MPF.Processors/MPF.Processors.csproj

@@ -12,7 +12,7 @@
         <SuppressTfmSupportBuildWarnings>true</SuppressTfmSupportBuildWarnings>
         <SymbolPackageFormat>snupkg</SymbolPackageFormat>
         <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
-        <VersionPrefix>3.3.3</VersionPrefix>
+        <VersionPrefix>3.5.0</VersionPrefix>
         <WarningsNotAsErrors>NU5104</WarningsNotAsErrors>
 
         <!-- Package Properties -->
@@ -33,13 +33,12 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="SabreTools.Hashing" Version="1.4.2" />
-        <PackageReference Include="SabreTools.Models" Version="1.5.8" />
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
-        <PackageReference Include="SabreTools.Serialization" Version="1.8.6" />
-        <PackageReference Include="System.IO.Compression" Version="4.3.0" Condition="!$(TargetFramework.StartsWith(`net2`)) AND !$(TargetFramework.StartsWith(`net3`)) AND !$(TargetFramework.StartsWith(`net40`))" />
-        <PackageReference Include="System.IO.Compression.ZipFile" Version="4.3.0" Condition="!$(TargetFramework.StartsWith(`net2`)) AND !$(TargetFramework.StartsWith(`net3`)) AND !$(TargetFramework.StartsWith(`net40`)) AND !$(TargetFramework.StartsWith(`net452`))" />
-        <PackageReference Include="System.Text.Encoding.CodePages" Version="9.0.4" Condition="!$(TargetFramework.StartsWith(`net2`)) AND !$(TargetFramework.StartsWith(`net3`)) AND !$(TargetFramework.StartsWith(`net40`)) AND !$(TargetFramework.StartsWith(`net452`))" />
+        <PackageReference Include="GrindCore.SharpCompress" Version="0.40.4-alpha" Condition="!$(TargetFramework.StartsWith(`net2`)) AND !$(TargetFramework.StartsWith(`net3`)) AND !$(TargetFramework.StartsWith(`net40`)) AND !$(TargetFramework.StartsWith(`net452`))" />
+        <PackageReference Include="SabreTools.Hashing" Version="[1.5.1]" />
+        <PackageReference Include="SabreTools.IO" Version="[1.7.6]" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
+        <PackageReference Include="SabreTools.Serialization" Version="[2.0.2]" />
+        <PackageReference Include="System.Text.Encoding.CodePages" Version="9.0.9" Condition="!$(TargetFramework.StartsWith(`net2`)) AND !$(TargetFramework.StartsWith(`net3`)) AND !$(TargetFramework.StartsWith(`net40`)) AND !$(TargetFramework.StartsWith(`net452`))" />
     </ItemGroup>
 
 </Project>

MPF.Processors/OutputFile.cs

@@ -1,9 +1,9 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
-#if NET452_OR_GREATER || NETCOREAPP
-using System.IO.Compression;
+#if NET462_OR_GREATER || NETCOREAPP
 using System.Linq;
+using SharpCompress.Archives.Zip;
 #endif
 
 namespace MPF.Processors
@@ -218,7 +218,7 @@ namespace MPF.Processors
             return false;
         }
 
-#if NET452_OR_GREATER || NETCOREAPP
+#if NET462_OR_GREATER || NETCOREAPP
         /// <summary>
         /// Indicates if an output file exists in an archive
         /// </summary>
@@ -238,7 +238,7 @@ namespace MPF.Processors
                 try
                 {
                     // Check all entries on filename alone
-                    if (archive.Entries.Any(e => e.Name == filename))
+                    if (archive.Entries.Any(e => e.Key == filename))
                         return true;
                 }
                 catch { }

MPF.Processors/PS3CFW.cs

@@ -1,6 +1,6 @@
 using System.Collections.Generic;
 using System.IO;
-using SabreTools.Models.Logiqx;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
 

MPF.Processors/ProcessingTool.cs

@@ -10,9 +10,8 @@ using System.Xml.Schema;
 using System.Xml.Serialization;
 using SabreTools.Hashing;
 using SabreTools.IO.Extensions;
-using SabreTools.Matching;
-using SabreTools.Models.Logiqx;
-using SabreTools.Models.PIC;
+using SabreTools.Data.Models.Logiqx;
+using SabreTools.Data.Models.PIC;
 using SabreTools.RedumpLib.Data;
 
 namespace MPF.Processors
@@ -133,7 +132,7 @@ namespace MPF.Processors
         {
             try
             {
-                return SabreTools.Serialization.Deserializers.PIC.DeserializeFile(pic);
+                return new SabreTools.Serialization.Readers.PIC().Deserialize(pic);
             }
             catch
             {
@@ -375,9 +374,9 @@ namespace MPF.Processors
         {
             return category?.ToLowerInvariant() switch
             {
-                "game" => DiscCategory.Games,
-                "video" => DiscCategory.Video,
-                "audio" => DiscCategory.Audio,
+                "(game)" => DiscCategory.Games,
+                "(video)" => DiscCategory.Video,
+                "(audio)" => DiscCategory.Audio,
                 _ => null,
             };
         }
@@ -1074,7 +1073,7 @@ namespace MPF.Processors
             // Only continue to check SSv2 for XGD3
             if (xgdType != 3)
                 return true;
-            
+
             // Determine if XGD3 SS.bin is SSv1 (Original Kreon) or SSv2 (0800 / Repaired Kreon)
 #if NET20
             var checkArr = new byte[72];
@@ -1126,8 +1125,8 @@ namespace MPF.Processors
             else if (xgdType == 3)
                 ccrt_offset = 0x20;
 
-            int[] entry_offsets = {0, 9, 18, 27, 36, 45, 54, 63};
-            int[] entry_lengths = {8, 8, 8, 8, 4, 4, 4, 4};
+            int[] entry_offsets = { 0, 9, 18, 27, 36, 45, 54, 63 };
+            int[] entry_lengths = { 8, 8, 8, 8, 4, 4, 4, 4 };
             for (int i = 0; i < entry_offsets.Length; i++)
             {
                 bool emptyResponse = true;
@@ -1289,7 +1288,7 @@ namespace MPF.Processors
             // Determine XGD type
             if (!GetXGDType(ss, out int xgdType))
                 return false;
-            
+
             // Determine if XGD3 SS.bin is SSv1 (Original Kreon) or SSv2 (0800 / Repaired Kreon)
 #if NET20
             var checkArr = new byte[72];
@@ -1300,7 +1299,7 @@ namespace MPF.Processors
 #endif
 
             // Do not produce an SS hash for bad SS (SSv1 XGD3 / Unrepaired Kreon SS)
-            if(xgdType == 3 && !ssv2)
+            if (xgdType == 3 && !ssv2)
                 return false;
 
             switch (xgdType)

MPF.Processors/Redumper.cs

@@ -1,14 +1,16 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
-#if NET452_OR_GREATER || NETCOREAPP
-using System.IO.Compression;
-#endif
 using System.Text;
 using System.Text.RegularExpressions;
 using SabreTools.Hashing;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
+#if NET462_OR_GREATER || NETCOREAPP
+using SharpCompress.Archives.Zip;
+using SharpCompress.Compressors;
+using SharpCompress.Compressors.ZStandard;
+#endif
 
 namespace MPF.Processors
 {
@@ -51,6 +53,7 @@ namespace MPF.Processors
         {
             // Ensure that required sections exist
             info = Builder.EnsureAllSections(info);
+            info.CommonDiscInfo!.Comments = string.Empty;
 
             // Get the dumping program and version
             info.DumpingInfo!.DumpingProgram ??= string.Empty;
@@ -72,13 +75,16 @@ namespace MPF.Processors
 
             // Get the PVD, if it exists
             info.Extras!.PVD = GetPVD($"{basePath}.log") ?? "Disc has no PVD";
+            string? sfsvd = GetSFSVD($"{basePath}.log");
+            if (!string.IsNullOrEmpty(sfsvd))
+                info.CommonDiscInfo.CommentsSpecialFields![SiteCode.HighSierraVolumeDescriptor] = sfsvd!;
 
             // Get the Datafile information
             info.TracksAndWriteOffsets!.ClrMameProData = GetDatfile($"{basePath}.log");
 
             // Get the write offset, if it exists
             string? writeOffset = GetWriteOffset($"{basePath}.log");
-            info.CommonDiscInfo!.RingWriteOffset = writeOffset;
+            info.CommonDiscInfo.RingWriteOffset = writeOffset;
             info.TracksAndWriteOffsets.OtherWriteOffsets = writeOffset;
 
             // Attempt to get multisession data
@@ -93,6 +99,12 @@ namespace MPF.Processors
                     VolumeLabels = volLabels;
             }
 
+            // Pre-compress the skeleton and state using Zstandard
+            if (File.Exists($"{basePath}.skeleton"))
+                _ = CompressZstandard($"{basePath}.skeleton");
+            if (File.Exists($"{basePath}.state"))
+                _ = CompressZstandard($"{basePath}.state");
+
             // Extract info based generically on MediaType
             switch (mediaType)
             {
@@ -146,7 +158,7 @@ namespace MPF.Processors
 
                     // Attempt to get the error count
                     long scsiErrors = GetSCSIErrorCount($"{basePath}.log");
-                    info.CommonDiscInfo!.ErrorsCount = (scsiErrors == -1 ? "Error retrieving error count" : scsiErrors.ToString());
+                    info.CommonDiscInfo.ErrorsCount = (scsiErrors == -1 ? "Error retrieving error count" : scsiErrors.ToString());
 
                     // Bluray-specific options
                     if (mediaType == MediaType.BluRay || mediaType == MediaType.NintendoWiiUOpticalDisc)
@@ -192,7 +204,7 @@ namespace MPF.Processors
                 case RedumpSystem.SonyElectronicBook:
                     info.CopyProtection!.SecuROMData = GetSecuROMData($"{basePath}.log", out SecuROMScheme secuROMScheme) ?? string.Empty;
                     if (secuROMScheme == SecuROMScheme.Unknown)
-                        info.CommonDiscInfo!.Comments = "Warning: Incorrect SecuROM sector count" + Environment.NewLine;
+                        info.CommonDiscInfo.Comments += $"Warning: Incorrect SecuROM sector count{Environment.NewLine}";
 
                     // Needed for some odd copy protections
                     info.CopyProtection!.Protection += GetDVDProtection($"{basePath}.log", false) ?? string.Empty;
@@ -206,7 +218,7 @@ namespace MPF.Processors
                 case RedumpSystem.KonamiPython2:
                     if (GetPlayStationInfo($"{basePath}.log", out string? kp2EXEDate, out string? kp2Serial, out string? kp2Version))
                     {
-                        info.CommonDiscInfo!.EXEDateBuildDate = kp2EXEDate;
+                        info.CommonDiscInfo.EXEDateBuildDate = kp2EXEDate;
                         info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = kp2Serial ?? string.Empty;
                         info.VersionAndEditions!.Version = kp2Version ?? string.Empty;
                     }
@@ -226,7 +238,7 @@ namespace MPF.Processors
                     string xmidString = ProcessingTool.GetXMID($"{basePath}.dmi").Trim('\0');
                     if (!string.IsNullOrEmpty(xmidString))
                     {
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.XMID] = xmidString;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.XMID] = xmidString;
                         var xmid = SabreTools.Serialization.Wrappers.XMID.Create(xmidString);
                         info.CommonDiscInfo.Serial = xmid?.Serial ?? string.Empty;
                         if (!redumpCompat)
@@ -239,7 +251,7 @@ namespace MPF.Processors
                     string xemidString = ProcessingTool.GetXeMID($"{basePath}.dmi").Trim('\0');
                     if (!string.IsNullOrEmpty(xemidString))
                     {
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.XeMID] = xemidString;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.XeMID] = xemidString;
                         var xemid = SabreTools.Serialization.Wrappers.XeMID.Create(xemidString);
                         info.CommonDiscInfo.Serial = xemid?.Serial ?? string.Empty;
                         if (!redumpCompat)
@@ -251,15 +263,15 @@ namespace MPF.Processors
 
                     string? dmiCrc = HashTool.GetFileHash($"{basePath}.dmi", HashType.CRC32);
                     if (dmiCrc != null)
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.DMIHash] = dmiCrc.ToUpperInvariant();
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.DMIHash] = dmiCrc.ToUpperInvariant();
                     string? pfiCrc = HashTool.GetFileHash($"{basePath}.pfi", HashType.CRC32);
                     if (pfiCrc != null)
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.PFIHash] = pfiCrc.ToUpperInvariant();
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.PFIHash] = pfiCrc.ToUpperInvariant();
                     if (ProcessingTool.IsValidSS($"{basePath}.ss") && !ProcessingTool.IsValidPartialSS($"{basePath}.ss"))
                     {
                         string? ssCrc = HashTool.GetFileHash($"{basePath}.ss", HashType.CRC32);
                         if (ssCrc != null)
-                            info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.SSHash] = ssCrc.ToUpperInvariant();
+                            info.CommonDiscInfo.CommentsSpecialFields![SiteCode.SSHash] = ssCrc.ToUpperInvariant();
                     }
 
                     string? ssRanges = ProcessingTool.GetSSRanges($"{basePath}.ss");
@@ -276,7 +288,7 @@ namespace MPF.Processors
                             out string? serial,
                             out _,
                             out string? version) ?? string.Empty;
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
                         info.CommonDiscInfo.EXEDateBuildDate = buildDate ?? string.Empty;
                         // TODO: Support region setting from parsed value
                         info.VersionAndEditions!.Version = version ?? string.Empty;
@@ -285,7 +297,7 @@ namespace MPF.Processors
 
                 case RedumpSystem.SegaMegaCDSegaCD:
                     info.Extras!.Header = GetSegaCDHeader($"{basePath}.log", out var scdBuildDate, out var scdSerial, out _) ?? string.Empty;
-                    info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = scdSerial ?? string.Empty;
+                    info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = scdSerial ?? string.Empty;
                     info.CommonDiscInfo.EXEDateBuildDate = scdBuildDate ?? string.Empty;
                     // TODO: Support region setting from parsed value
                     break;
@@ -298,7 +310,7 @@ namespace MPF.Processors
                             out string? serial,
                             out _,
                             out string? version) ?? string.Empty;
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
                         info.CommonDiscInfo.EXEDateBuildDate = buildDate ?? string.Empty;
                         // TODO: Support region setting from parsed value
                         info.VersionAndEditions!.Version = version ?? string.Empty;
@@ -313,7 +325,7 @@ namespace MPF.Processors
                             out string? serial,
                             out _,
                             out string? version) ?? string.Empty;
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
                         info.CommonDiscInfo.EXEDateBuildDate = buildDate ?? string.Empty;
                         // TODO: Support region setting from parsed value
                         info.VersionAndEditions!.Version = version ?? string.Empty;
@@ -328,7 +340,7 @@ namespace MPF.Processors
                             out string? serial,
                             out _,
                             out string? version) ?? string.Empty;
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
                         info.CommonDiscInfo.EXEDateBuildDate = buildDate ?? string.Empty;
                         // TODO: Support region setting from parsed value
                         info.VersionAndEditions!.Version = version ?? string.Empty;
@@ -343,7 +355,7 @@ namespace MPF.Processors
                             out string? serial,
                             out _,
                             out string? version) ?? string.Empty;
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = serial ?? string.Empty;
                         info.CommonDiscInfo.EXEDateBuildDate = buildDate ?? string.Empty;
                         // TODO: Support region setting from parsed value
                         info.VersionAndEditions!.Version = version ?? string.Empty;
@@ -356,7 +368,7 @@ namespace MPF.Processors
                         out string? saturnSerial,
                         out _,
                         out string? saturnVersion) ?? string.Empty;
-                    info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = saturnSerial ?? string.Empty;
+                    info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = saturnSerial ?? string.Empty;
                     info.CommonDiscInfo.EXEDateBuildDate = saturnBuildDate ?? string.Empty;
                     // TODO: Support region setting from parsed value
                     info.VersionAndEditions!.Version = saturnVersion ?? string.Empty;
@@ -365,7 +377,7 @@ namespace MPF.Processors
                 case RedumpSystem.SonyPlayStation:
                     if (GetPlayStationInfo($"{basePath}.log", out string? psxEXEDate, out string? psxSerial, out var _))
                     {
-                        info.CommonDiscInfo!.EXEDateBuildDate = psxEXEDate;
+                        info.CommonDiscInfo.EXEDateBuildDate = psxEXEDate;
                         info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = psxSerial ?? string.Empty;
                     }
 
@@ -378,21 +390,21 @@ namespace MPF.Processors
                 case RedumpSystem.SonyPlayStation2:
                     if (GetPlayStationInfo($"{basePath}.log", out string? ps2EXEDate, out string? ps2Serial, out var ps2Version))
                     {
-                        info.CommonDiscInfo!.EXEDateBuildDate = ps2EXEDate;
+                        info.CommonDiscInfo.EXEDateBuildDate = ps2EXEDate;
                         info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = ps2Serial ?? string.Empty;
                         info.VersionAndEditions!.Version = ps2Version ?? string.Empty;
                     }
 
                     string? ps2Protection = GetPlayStation2Protection($"{basePath}.log");
                     if (ps2Protection != null)
-                        info.CommonDiscInfo!.Comments = $"<b>Protection</b>: {ps2Protection}" + Environment.NewLine;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.Protection] = ps2Protection;
 
                     break;
 
                 case RedumpSystem.SonyPlayStation3:
                     if (GetPlayStationInfo($"{basePath}.log", out var _, out string? ps3Serial, out var ps3Version))
                     {
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = ps3Serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = ps3Serial ?? string.Empty;
                         info.VersionAndEditions!.Version = ps3Version ?? string.Empty;
                     }
 
@@ -401,7 +413,7 @@ namespace MPF.Processors
                 case RedumpSystem.SonyPlayStation4:
                     if (GetPlayStationInfo($"{basePath}.log", out var _, out string? ps4Serial, out var ps4Version))
                     {
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = ps4Serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = ps4Serial ?? string.Empty;
                         info.VersionAndEditions!.Version = ps4Version ?? string.Empty;
                     }
 
@@ -410,7 +422,7 @@ namespace MPF.Processors
                 case RedumpSystem.SonyPlayStation5:
                     if (GetPlayStationInfo($"{basePath}.log", out var _, out string? ps5Serial, out var ps5Version))
                     {
-                        info.CommonDiscInfo!.CommentsSpecialFields![SiteCode.InternalSerialName] = ps5Serial ?? string.Empty;
+                        info.CommonDiscInfo.CommentsSpecialFields![SiteCode.InternalSerialName] = ps5Serial ?? string.Empty;
                         info.VersionAndEditions!.Version = ps5Version ?? string.Empty;
                     }
 
@@ -441,9 +453,12 @@ namespace MPF.Processors
                         new($"{outputFilename}.atip", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "atip"),
-                        new($"{outputFilename}.cache", OutputFileFlags.Binary
+                        new([$"{outputFilename}.cache", $"{outputFilename}.1.cache"], OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "cache"),
+                        new($"{outputFilename}.2.cache", OutputFileFlags.Binary
+                            | OutputFileFlags.Zippable,
+                            "cache_2"),
                         new($"{outputFilename}.cdtext", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "cdtext"),
@@ -464,10 +479,13 @@ namespace MPF.Processors
                             "pma"),
                         new([$"{outputFilename}.scram", $"{outputFilename}.scrap"], OutputFileFlags.Required
                             | OutputFileFlags.Deleteable),
-                        new($"{outputFilename}.state", OutputFileFlags.Required
-                            | OutputFileFlags.Binary
+                        // TODO: Required if Zstandard version doesn't exist
+                        new($"{outputFilename}.state", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "state"),
+                        new($"{outputFilename}.state.zst", OutputFileFlags.Binary
+                            | OutputFileFlags.Zippable,
+                            "state_zst"),
                         new($"{outputFilename}.subcode", OutputFileFlags.Required
                             | OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
@@ -508,6 +526,9 @@ namespace MPF.Processors
                             cdrom.Add(new($"{trackName}.skeleton", OutputFileFlags.Binary
                                 | OutputFileFlags.Zippable,
                                 $"skeleton_{trackNumber}"));
+                            cdrom.Add(new($"{trackName}.skeleton.zst", OutputFileFlags.Binary
+                                | OutputFileFlags.Zippable,
+                                $"skeleton_zst_{trackNumber}"));
                             trackNumber++;
                         }
                     }
@@ -519,6 +540,9 @@ namespace MPF.Processors
                         cdrom.Add(new($"{outputFilename}.skeleton", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "skeleton"));
+                        cdrom.Add(new($"{outputFilename}.skeleton.zst", OutputFileFlags.Binary
+                            | OutputFileFlags.Zippable,
+                            "skeleton_zst"));
                     }
 
                     return cdrom;
@@ -527,13 +551,6 @@ namespace MPF.Processors
                 case MediaType.NintendoGameCubeGameDisc:
                 case MediaType.NintendoWiiOpticalDisc:
                     return [
-                        // .asus is obsolete: newer redumper produces .cache instead
-                        new($"{outputFilename}.asus", OutputFileFlags.Binary
-                            | OutputFileFlags.Zippable,
-                            "asus"),
-                        new($"{outputFilename}.cache", OutputFileFlags.Binary
-                            | OutputFileFlags.Zippable,
-                            "cache"),
                         new($"{outputFilename}.dmi", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "dmi"),
@@ -570,19 +587,26 @@ namespace MPF.Processors
                         new($"{outputFilename}.skeleton", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "skeleton"),
+                        new($"{outputFilename}.skeleton.zst", OutputFileFlags.Binary
+                            | OutputFileFlags.Zippable,
+                            "skeleton_zst"),
                         new($"{outputFilename}.ss", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "ss"),
+                        // ssv1 and ssv2 extensions are obsolete
                         new($"{outputFilename}.ssv1", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "ssv1"),
                         new($"{outputFilename}.ssv2", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "ssv2"),
-                        new($"{outputFilename}.state", OutputFileFlags.Required
-                            | OutputFileFlags.Binary
+                        // TODO: Required if Zstandard version doesn't exist
+                        new($"{outputFilename}.state", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "state"),
+                        new($"{outputFilename}.state.zst", OutputFileFlags.Binary
+                            | OutputFileFlags.Zippable,
+                            "state_zst"),
                     ];
 
                 case MediaType.HDDVD: // TODO: Confirm that this information outputs
@@ -617,10 +641,16 @@ namespace MPF.Processors
                         new($"{outputFilename}.skeleton", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "skeleton"),
-                        new($"{outputFilename}.state", OutputFileFlags.Required
-                            | OutputFileFlags.Binary
+                        new($"{outputFilename}.skeleton.zst", OutputFileFlags.Binary
+                            | OutputFileFlags.Zippable,
+                            "skeleton_zst"),
+                        // TODO: Required if Zstandard version doesn't exist
+                        new($"{outputFilename}.state", OutputFileFlags.Binary
                             | OutputFileFlags.Zippable,
                             "state"),
+                        new($"{outputFilename}.state.zst", OutputFileFlags.Binary
+                            | OutputFileFlags.Zippable,
+                            "state_zst"),
                     ];
             }
 
@@ -631,6 +661,57 @@ namespace MPF.Processors
 
         #region Private Extra Methods
 
+        /// <summary>
+        /// Attempt to compress a file to Zstandard, removing the original on success
+        /// </summary>
+        /// <param name="file">Full path to an existing file</param>
+        /// <returns>True if the compression was a success, false otherwise</returns>
+        private static bool CompressZstandard(string file)
+        {
+#if NET20 || NET35 || NET40 || NET452
+            // Compression is not available for this framework version
+            return false;
+#else
+            // Ensure the file exists
+            if (!File.Exists(file))
+                return false;
+
+            try
+            {
+                // Prepare the input and output streams
+                using var ifs = File.Open(file, FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
+                using var ofs = File.Open($"{file}.zst", FileMode.Create, FileAccess.Write, FileShare.None);
+                using var zst = new ZStandardStream(ofs, CompressionMode.Compress, compressionLevel: 19, leaveOpen: true);
+
+                // Compress and write in blocks
+                int read = 0;
+                do
+                {
+                    byte[] buffer = new byte[3 * 1024 * 1024];
+
+                    read = ifs.Read(buffer, 0, buffer.Length);
+                    if (read == 0)
+                        break;
+
+                    zst.Write(buffer, 0, read);
+                    zst.Flush();
+                } while (read > 0);
+            }
+            catch
+            {
+                // Try to delete the incomplete
+                try { File.Delete($"{file}.zst"); } catch { }
+
+                return false;
+            }
+
+            // Try to delete the file
+            try { File.Delete(file); } catch { }
+
+            return true;
+#endif
+        }
+
         /// <summary>
         /// Get if the datfile exists in the log
         /// </summary>
@@ -648,7 +729,7 @@ namespace MPF.Processors
             if (!string.IsNullOrEmpty(outputDirectory))
                 basePath = Path.Combine(outputDirectory, basePath);
 
-#if NET20 || NET35 || NET40
+#if NET20 || NET35 || NET40 || NET452
             // Assume the zipfile has the file in it
             return File.Exists($"{basePath}_logs.zip");
 #else
@@ -659,14 +740,23 @@ namespace MPF.Processors
             try
             {
                 // Try to open the archive
-                using ZipArchive archive = ZipFile.OpenRead($"{basePath}_logs.zip");
+                using ZipArchive archive = ZipArchive.Open($"{basePath}_logs.zip");
 
                 // Get the log entry and check it, if possible
-                var entry = archive.GetEntry(outputFilename);
-                if (entry == null)
+                ZipArchiveEntry? logEntry = null;
+                foreach (var entry in archive.Entries)
+                {
+                    if (entry.Key == outputFilename)
+                    {
+                        logEntry = entry;
+                        break;
+                    }
+                }
+
+                if (logEntry == null)
                     return false;
 
-                using var sr = new StreamReader(entry.Open());
+                using var sr = new StreamReader(logEntry.OpenEntryStream());
                 return GetDatfile(sr) != null;
             }
             catch
@@ -1204,7 +1294,7 @@ namespace MPF.Processors
                     }
 
                     // Reset C2 errors when a media errors section is found
-                    else if (line.StartsWith("media errors:"))
+                    else if (line.StartsWith("media errors:") || line.StartsWith("initial dump media errors:"))
                     {
                         c2Errors = 0;
                     }
@@ -1800,6 +1890,44 @@ namespace MPF.Processors
             }
         }
 
+        /// <summary>
+        /// Get the SFSVD from the input file, if possible
+        /// </summary>
+        /// <param name="log">Log file location</param>
+        /// <returns>Newline-delimited SFSVD if possible, null on error</returns>
+        internal static string? GetSFSVD(string log)
+        {
+            // If the file doesn't exist, we can't get info from it
+            if (string.IsNullOrEmpty(log))
+                return null;
+            if (!File.Exists(log))
+                return null;
+
+            try
+            {
+                // Fast forward to the SFSVD line
+                using var sr = File.OpenText(log);
+                while (!sr.EndOfStream && sr.ReadLine()?.TrimStart()?.StartsWith("SFSVD:") == false) ;
+                if (sr.EndOfStream)
+                    return null;
+
+                // Now that we're at the relevant entries, read each line in and concatenate
+                string? sfsvdString = string.Empty, line = sr.ReadLine();
+                while (line?.StartsWith("03") == true)
+                {
+                    sfsvdString += line + "\n";
+                    line = sr.ReadLine();
+                }
+
+                return sfsvdString.TrimEnd('\n');
+            }
+            catch
+            {
+                // We don't care what the exception is right now
+                return null;
+            }
+        }
+
         /// <summary>
         /// Get the non-zero data start from the input file, if possible
         /// </summary>
@@ -2254,6 +2382,7 @@ namespace MPF.Processors
             // redumper v2022.10.28 [Oct 28 2022, 05:41:43] (print usage: --help,-h)
             // redumper v2022.12.22 build_87 [Dec 22 2022, 01:56:26]
             // redumper v2025.03.29 build_481
+            // redumper (build: b652)
 
             try
             {
@@ -2267,10 +2396,7 @@ namespace MPF.Processors
                     nextLine = sr.ReadLine()?.Trim() ?? string.Empty;
 
                 // Generate regex
-                // Permissive
-                var regex = new Regex(@"^redumper (v.+)", RegexOptions.Compiled);
-                // Strict
-                //var regex = new Regex(@"^redumper (v\d{4}\.\d{2}\.\d{2}(| build_\d+)) \[.+\]", RegexOptions.Compiled);
+                var regex = new Regex(@"^redumper (.+)", RegexOptions.Compiled);
 
                 // Extract the version string
                 var match = regex.Match(nextLine);

MPF.Processors/RegexOutputFile.cs

@@ -1,11 +1,10 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
-#if NET452_OR_GREATER || NETCOREAPP
-using System.IO.Compression;
-using System.Linq;
-#endif
 using System.Text.RegularExpressions;
+#if NET462_OR_GREATER || NETCOREAPP
+using SharpCompress.Archives.Zip;
+#endif
 
 namespace MPF.Processors
 {
@@ -52,7 +51,7 @@ namespace MPF.Processors
             // Ensure the directory exists
             if (!Directory.Exists(outputDirectory))
                 return false;
-            
+
             // Get list of all files in directory
             var directoryFiles = Directory.GetFiles(outputDirectory);
             foreach (string file in directoryFiles)
@@ -64,7 +63,7 @@ namespace MPF.Processors
             return false;
         }
 
-#if NET452_OR_GREATER || NETCOREAPP
+#if NET462_OR_GREATER || NETCOREAPP
         /// <inheritdoc/>
         public override bool Exists(ZipArchive? archive)
         {
@@ -73,10 +72,12 @@ namespace MPF.Processors
                 return false;
 
             // Get list of all files in archive
-            var archiveFiles = archive.Entries.Select(e => e.Name).ToList();
-            foreach (string file in archiveFiles)
+            foreach (var entry in archive.Entries)
             {
-                if (Array.Exists(Filenames, pattern => Regex.IsMatch(file, pattern)))
+                if (entry.Key == null)
+                    continue;
+
+                if (Array.Exists(Filenames, pattern => Regex.IsMatch(entry.Key, pattern)))
                     return true;
             }
 
@@ -92,7 +93,7 @@ namespace MPF.Processors
                 return [];
 
             List<string> paths = [];
-            
+
             // Get list of all files in directory
             var directoryFiles = Directory.GetFiles(outputDirectory);
             foreach (string file in directoryFiles)

MPF.Processors/UmdImageCreator.cs

@@ -1,8 +1,8 @@
 using System;
 using System.Collections.Generic;
 using System.IO;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.Hashing;
-using SabreTools.Models.Logiqx;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
 
@@ -184,13 +184,13 @@ namespace MPF.Processors
                         break;
 
                     if (line.StartsWith("TITLE") && title == null)
-                        title = line.Split(' ')[1];
+                        title = line.Substring("TITLE: ".Length);
                     else if (line.StartsWith("DISC_ID") && version == null)
                         serial = line.Split(' ')[1];
                     else if (line.StartsWith("DISC_VERSION") && version == null)
                         version = line.Split(' ')[1];
                     else if (line.StartsWith("pspUmdTypes"))
-                        category = ProcessingTool.GetUMDCategory(line.Split(' ')[1]);
+                        category = ProcessingTool.GetUMDCategory(line.Split(' ')[2]);
                     else if (line.StartsWith("L0 length"))
                         layer = line.Split(' ')[2];
                     else if (line.StartsWith("FileSize:"))

MPF.Processors/XboxBackupCreator.cs

@@ -1,8 +1,8 @@
 using System.Collections.Generic;
 using System.IO;
+using SabreTools.Data.Models.Logiqx;
 using SabreTools.Hashing;
 using SabreTools.IO.Extensions;
-using SabreTools.Models.Logiqx;
 using SabreTools.RedumpLib;
 using SabreTools.RedumpLib.Data;
 

MPF.UI/ElementConverter.cs

@@ -4,6 +4,7 @@ using System.Windows.Data;
 using MPF.Frontend;
 using MPF.Frontend.ComboBoxItems;
 using SabreTools.RedumpLib.Data;
+using LogCompression = MPF.Processors.LogCompression;
 using RedumperDriveType = MPF.ExecutionContexts.Redumper.DriveType;
 using RedumperReadMethod = MPF.ExecutionContexts.Redumper.ReadMethod;
 using RedumperSectorOrder = MPF.ExecutionContexts.Redumper.SectorOrder;
@@ -18,6 +19,7 @@ namespace MPF.UI
             {
                 DiscCategory discCategory => new Element<DiscCategory>(discCategory),
                 InternalProgram internalProgram => new Element<InternalProgram>(internalProgram),
+                LogCompression logCompression => new Element<LogCompression>(logCompression),
                 MediaType mediaType => new Element<MediaType>(mediaType),
                 RedumperReadMethod readMethod => new Element<RedumperReadMethod>(readMethod),
                 RedumperSectorOrder sectorOrder => new Element<RedumperSectorOrder>(sectorOrder),
@@ -40,6 +42,7 @@ namespace MPF.UI
             {
                 Element<DiscCategory> dcElement => dcElement.Value,
                 Element<InternalProgram> ipElement => ipElement.Value,
+                Element<LogCompression> lcElement => lcElement.Value,
                 Element<MediaType> mtElement => mtElement.Value,
                 Element<RedumperReadMethod> rmElement => rmElement.Value,
                 Element<RedumperSectorOrder> soElement => soElement.Value,

MPF.UI/MPF.UI.csproj

@@ -18,7 +18,7 @@
         <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
         <UseWindowsForms>true</UseWindowsForms>
         <UseWPF>true</UseWPF>
-        <VersionPrefix>3.3.3</VersionPrefix>
+        <VersionPrefix>3.5.0</VersionPrefix>
 
         <!-- Package Properties -->
         <AssemblyName>MPF</AssemblyName>
@@ -70,7 +70,7 @@
     </ItemGroup>
 
     <ItemGroup>
-        <PackageReference Include="SabreTools.RedumpLib" Version="1.6.8" />
+        <PackageReference Include="SabreTools.RedumpLib" Version="[1.7.4]" />
     </ItemGroup>
 
     <ItemGroup>

MPF.UI/Windows/CheckDumpWindow.xaml

@@ -85,7 +85,7 @@
                     <Button x:Name="InputPathBrowseButton" Grid.Row="0" Grid.Column="1" Height="22" Width="50" HorizontalAlignment="Right" Content="Browse"
                 IsEnabled="{Binding InputPathBrowseButtonEnabled}" Style="{DynamicResource CustomButtonStyle}"/>
 
-                    <Label x:Name="SystemMediaTypeLabel" Grid.Row="1" Grid.Column="0" VerticalAlignment="Center" Content="System/Media Type" />
+                    <Label x:Name="SystemTypeLabel" Grid.Row="1" Grid.Column="0" VerticalAlignment="Center" Content="System Type" />
                     <ComboBox x:Name="SystemTypeComboBox" Grid.Row="1" Grid.Column="1" Height="22" Width="250" HorizontalAlignment="Left"
                   ItemsSource="{Binding Systems}" SelectedItem="{Binding Path=CurrentSystem, Converter={StaticResource ElementConverter}, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"
                   IsEnabled="{Binding SystemTypeComboBoxEnabled}" Style="{DynamicResource CustomComboBoxStyle}">
@@ -99,9 +99,6 @@
                             </Style>
                         </ComboBox.ItemContainerStyle>
                     </ComboBox>
-                    <ComboBox x:Name="MediaTypeComboBox" Grid.Row="1" Grid.Column="1" Height="22" Width="140" HorizontalAlignment="Right"
-                  ItemsSource="{Binding MediaTypes}" SelectedItem="{Binding Path=CurrentMediaType, Converter={StaticResource ElementConverter}, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"
-                  IsEnabled="{Binding MediaTypeComboBoxEnabled}" Style="{DynamicResource CustomComboBoxStyle}" />
 
                     <Label x:Name="DumpingProgramLabel" Grid.Row="2" Grid.Column="0" VerticalAlignment="Center" Content="Dumping Program"/>
                     <ComboBox x:Name="DumpingProgramComboBox" Grid.Row="2" Grid.Column="1" Height="22" Width="250" HorizontalAlignment="Left"

MPF.UI/Windows/CheckDumpWindow.xaml.cs

@@ -29,7 +29,6 @@ namespace MPF.UI.Windows
         private ComboBox? DumpingProgramComboBox => ItemHelper.FindChild<ComboBox>(this, "DumpingProgramComboBox");
         private Button? InputPathBrowseButton => ItemHelper.FindChild<Button>(this, "InputPathBrowseButton");
         private TextBox? InputPathTextBox => ItemHelper.FindChild<TextBox>(this, "InputPathTextBox");
-        private ComboBox? MediaTypeComboBox => ItemHelper.FindChild<ComboBox>(this, "MediaTypeComboBox");
         private ComboBox? SystemTypeComboBox => ItemHelper.FindChild<ComboBox>(this, "SystemTypeComboBox");
 
         #endregion
@@ -89,7 +88,6 @@ namespace MPF.UI.Windows
 
             // User Area SelectionChanged
             SystemTypeComboBox!.SelectionChanged += SystemTypeComboBoxSelectionChanged;
-            MediaTypeComboBox!.SelectionChanged += MediaTypeComboBoxSelectionChanged;
             DumpingProgramComboBox!.SelectionChanged += DumpingProgramComboBoxSelectionChanged;
 
             // User Area TextChanged
@@ -160,8 +158,8 @@ namespace MPF.UI.Windows
         /// </summary>
         private async void OnCheckDumpClick(object sender, EventArgs e)
         {
-            string? errorMessage = await CheckDumpViewModel.CheckDump(ShowMediaInformationWindow);
-            if (string.IsNullOrEmpty(errorMessage))
+            var result = await CheckDumpViewModel.CheckDump(ShowMediaInformationWindow);
+            if (result)
             {
                 bool? checkAgain = DisplayUserMessage("Check Complete", "The dump has been processed successfully! Would you like to check another dump?", 2, false);
                 if (checkAgain == false)
@@ -171,7 +169,8 @@ namespace MPF.UI.Windows
             }
             else
             {
-                DisplayUserMessage("Check Failed", errorMessage!, 1, false);
+                string message = result.Message.Length > 0 ? result.Message : "Please check all files exist and try again!";
+                DisplayUserMessage("Check Failed", message, 1, false);
             }
         }
 
@@ -211,15 +210,6 @@ namespace MPF.UI.Windows
                 CheckDumpViewModel.ChangeInputPath();
         }
 
-        /// <summary>
-        /// Handler for MediaTypeComboBox SelectionChanged event
-        /// </summary>
-        public void MediaTypeComboBoxSelectionChanged(object sender, SelectionChangedEventArgs e)
-        {
-            if (CheckDumpViewModel.CanExecuteSelectionChanged)
-                CheckDumpViewModel.ChangeMediaType();
-        }
-
         /// <summary>
         /// Handler for SystemTypeComboBox SelectionChanged event
         /// </summary>

MPF.UI/Windows/MainWindow.xaml

@@ -134,7 +134,7 @@
                         <RowDefinition/>
                     </Grid.RowDefinitions>
 
-                    <Label x:Name="SystemMediaTypeLabel" Grid.Row="0" Grid.Column="0" VerticalAlignment="Center" Content="System/Media Type" />
+                    <Label x:Name="SystemMediaTypeLabel" Grid.Row="0" Grid.Column="0" VerticalAlignment="Center" Content="System" />
                     <ComboBox x:Name="SystemTypeComboBox" Grid.Row="0" Grid.Column="1" Height="22" Width="250" HorizontalAlignment="Left"
                               ItemsSource="{Binding Systems}" SelectedItem="{Binding Path=CurrentSystem, Converter={StaticResource ElementConverter}, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"
                               IsEnabled="{Binding SystemTypeComboBoxEnabled}" Style="{DynamicResource CustomComboBoxStyle}">
@@ -150,7 +150,8 @@
                     </ComboBox>
                     <ComboBox x:Name="MediaTypeComboBox" Grid.Row="0" Grid.Column="1" Height="22" Width="140" HorizontalAlignment="Right"
                               ItemsSource="{Binding MediaTypes}" SelectedItem="{Binding Path=CurrentMediaType, Converter={StaticResource ElementConverter}, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"
-                              IsEnabled="{Binding MediaTypeComboBoxEnabled}" Style="{DynamicResource CustomComboBoxStyle}" />
+                              IsEnabled="{Binding MediaTypeComboBoxEnabled}" Style="{DynamicResource CustomComboBoxStyle}"
+                              Visibility="Hidden" />
 
                     <Label x:Name="OutputPathLabel" Grid.Row="1" Grid.Column="0" VerticalAlignment="Center" Content="Output Path"/>
                     <TextBox x:Name="OutputPathTextBox" Grid.Row="1" Grid.Column="1" Height="22" Width="345" HorizontalAlignment="Left" VerticalContentAlignment="Center"

MPF.UI/Windows/MainWindow.xaml.cs

@@ -47,6 +47,7 @@ namespace MPF.UI.Windows
         private ComboBox? MediaTypeComboBox => ItemHelper.FindChild<ComboBox>(this, "MediaTypeComboBox");
         private Button? OutputPathBrowseButton => ItemHelper.FindChild<Button>(this, "OutputPathBrowseButton");
         private TextBox? OutputPathTextBox => ItemHelper.FindChild<TextBox>(this, "OutputPathTextBox");
+        private Label? SystemMediaTypeLabel => ItemHelper.FindChild<Label>(this, "SystemMediaTypeLabel");
         private ComboBox? SystemTypeComboBox => ItemHelper.FindChild<ComboBox>(this, "SystemTypeComboBox");
 
         #endregion
@@ -113,6 +114,9 @@ namespace MPF.UI.Windows
             // Set the UI color scheme according to the options
             ApplyTheme();
 
+            // Hide or show the media type box based on program
+            SetMediaTypeVisibility();
+
             // Check for updates, if necessary
             if (MainViewModel.Options.CheckForUpdatesOnStartup)
                 CheckForUpdates(showIfSame: false);
@@ -205,8 +209,14 @@ namespace MPF.UI.Windows
             MainViewModel.CheckForUpdates(out bool different, out string message, out var url);
 
             // If we have a new version, put it in the clipboard
-            if (different && !string.IsNullOrEmpty(url))
-                Clipboard.SetText(url);
+            if (MainViewModel.Options.CopyUpdateUrlToClipboard && different && !string.IsNullOrEmpty(url))
+            {
+                try
+                {
+                    Clipboard.SetText(url);
+                }
+                catch { }
+            }
 
             if (showIfSame || different)
                 CustomMessageBox.Show(this, message, "Version Update Check", MessageBoxButton.OK, different ? MessageBoxImage.Exclamation : MessageBoxImage.Information);
@@ -337,6 +347,37 @@ namespace MPF.UI.Windows
             optionsWindow.Show();
         }
 
+        /// <summary>
+        /// Set media type combo box visibility based on current program
+        /// </summary>
+        public void SetMediaTypeVisibility()
+        {
+            // Only DiscImageCreator uses the media type box
+            if (MainViewModel.CurrentProgram != InternalProgram.DiscImageCreator)
+            {
+                SystemMediaTypeLabel!.Content = "System";
+                MediaTypeComboBox!.Visibility = Visibility.Hidden;
+                return;
+            }
+
+            // If there are no media types defined
+            if (MainViewModel.MediaTypes == null)
+            {
+                SystemMediaTypeLabel!.Content = "System";
+                MediaTypeComboBox!.Visibility = Visibility.Hidden;
+                return;
+            }
+
+            // Only systems with more than one media type should show the box
+            bool visible = MainViewModel.MediaTypes.Count > 1;
+            SystemMediaTypeLabel!.Content = visible
+                ? "System/Media Type"
+                : "System";
+            MediaTypeComboBox!.Visibility = visible
+                ? Visibility.Visible
+                : Visibility.Hidden;
+        }
+
         /// <summary>
         /// Set the UI color scheme according to the options
         /// </summary>
@@ -431,6 +472,9 @@ namespace MPF.UI.Windows
 
             // Set the UI color scheme according to the options
             ApplyTheme();
+
+            // Hide or show the media type box based on program
+            SetMediaTypeVisibility();
         }
 
         #region Menu Bar
@@ -524,7 +568,10 @@ namespace MPF.UI.Windows
         public void DumpingProgramComboBoxSelectionChanged(object sender, SelectionChangedEventArgs e)
         {
             if (MainViewModel.CanExecuteSelectionChanged)
+            {
                 MainViewModel.ChangeDumpingProgram();
+                SetMediaTypeVisibility();
+            }
         }
 
         /// <summary>
@@ -581,7 +628,10 @@ namespace MPF.UI.Windows
         public void SystemTypeComboBoxSelectionChanged(object sender, SelectionChangedEventArgs e)
         {
             if (MainViewModel.CanExecuteSelectionChanged)
+            {
                 MainViewModel.ChangeSystem();
+                SetMediaTypeVisibility();
+            }
         }
 
         /// <summary>

MPF.UI/Windows/MediaInformationWindow.xaml

@@ -240,6 +240,8 @@
                                                         Text="{Binding Path=SubmissionInfo.CommonDiscInfo.CommentsSpecialFields[(redump:SiteCode)FoxInteractiveID], Mode=TwoWay}"/>
                                     <controls:UserInput x:Name="GTInteractiveIDTextBox" Label="GT Interactive ID"
                                                         Text="{Binding Path=SubmissionInfo.CommonDiscInfo.CommentsSpecialFields[(redump:SiteCode)GTInteractiveID], Mode=TwoWay}"/>
+                                    <controls:UserInput x:Name="InterplayIDTextBox" Label="Interplay ID"
+                                                        Text="{Binding Path=SubmissionInfo.CommonDiscInfo.CommentsSpecialFields[(redump:SiteCode)InterplayID], Mode=TwoWay}"/>
                                     <controls:UserInput x:Name="JASRACIDTextBox" Label="JASRAC ID"
                                                         Text="{Binding Path=SubmissionInfo.CommonDiscInfo.CommentsSpecialFields[(redump:SiteCode)JASRACID], Mode=TwoWay}"/>
                                     <controls:UserInput x:Name="KingRecordsIDTextBox" Label="King Records ID"

MPF.UI/Windows/MediaInformationWindow.xaml.cs

@@ -332,8 +332,6 @@ namespace MPF.UI.Windows
                 case DiscType.NintendoWiiOpticalDiscSL:
                 case DiscType.NintendoWiiOpticalDiscDL:
                 case DiscType.NintendoWiiUOpticalDiscSL:
-                case DiscType.UMDSL:
-                case DiscType.UMDDL:
                     // Quad-layer discs
                     if (submissionInfo?.SizeAndChecksums?.Layerbreak3 != default(long))
                     {
@@ -428,6 +426,23 @@ namespace MPF.UI.Windows
 
                     break;
 
+                case DiscType.UMDSL:
+                case DiscType.UMDDL:
+                    L0Info!.Header = reverseOrder ? "Layer 0 (Outer)" : "Layer 0 (Inner)";
+                    L0MasteringRing!.Label = "Mastering Ring";
+                    L0MasteringSID!.Label = "Mastering SID";
+                    L0Toolstamp!.Label = "Toolstamp/Mastering Code";
+                    L0MouldSID!.Label = "Data Side Mould SID";
+                    L0AdditionalMould!.Label = "Data Side Additional Mould";
+
+                    L1Info!.Header = reverseOrder ? "Layer 1 (Inner)" : "Layer 1 (Outer)";
+                    L1MasteringRing!.Label = "Mastering Ring";
+                    L1MasteringSID!.Label = "Mastering SID";
+                    L1Toolstamp!.Label = "Toolstamp/Mastering Code";
+                    L1MouldSID!.Label = "Label Side Mould SID";
+                    L1AdditionalMould!.Label = "Label Side Additional Mould";
+                    break;
+
                 // All other media we assume to have no rings
                 default:
                     L0Info!.Visibility = Visibility.Collapsed;

MPF.UI/Windows/OptionsWindow.xaml

@@ -82,6 +82,11 @@
                                           ToolTip="Check for updates when the application starts" Margin="0,4"
                                 />
 
+                                <CheckBox VerticalAlignment="Center" Content="Copy Update URL to Clipboard"
+                                          IsChecked="{Binding Options.CopyUpdateUrlToClipboard}"
+                                          ToolTip="If an update is found, try to copy the update URL to the clipboard" Margin="0,4"
+                                />
+
                                 <CheckBox VerticalAlignment="Center" Content="Fast Update Label"
                                           IsChecked="{Binding Options.FastUpdateLabel}"
                                           ToolTip="Bypasses disc checks to quickly update the output path. Use with caution!" Margin="0,4"
@@ -90,22 +95,16 @@
                         </GroupBox>
 
                         <GroupBox Margin="5,5,5,5" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Header="Detection">
-                            <UniformGrid Columns="2" Rows="3">
-                                <CheckBox x:Name="SkipMediaTypeDetectionCheckBox" VerticalAlignment="Center" Content="Skip Type Detect"
-                                          IsChecked="{Binding Options.SkipMediaTypeDetection}"
-                                          ToolTip="Disable trying to guess media type inserted (may improve performance at startup)" Margin="0,4"
-                                />
-
+                            <UniformGrid Columns="2" Rows="2">
                                 <CheckBox VerticalAlignment="Center" Content="Skip System Detect"
                                           IsChecked="{Binding Options.SkipSystemDetection}"
                                           ToolTip="Disable trying to guess system (may improve performance at startup)" Margin="0,4"
                                 />
 
                                 <CheckBox VerticalAlignment="Center" Content="No Fixed Drives"
-                                        IsChecked="{Binding Options.IgnoreFixedDrives}"
-                                        ToolTip="Ignore hard drives and other fixed drives" Margin="0,4"
+                                          IsChecked="{Binding Options.IgnoreFixedDrives}"
+                                          ToolTip="Ignore hard drives and other fixed drives" Margin="0,4"
                                 />
-                                <Label/> <!-- Empty label for padding -->
 
                                 <Label VerticalAlignment="Center" Content="Default System:" HorizontalAlignment="Right" />
                                 <ComboBox x:Name="DefaultSystemComboBox" Height="22" Width="200" HorizontalAlignment="Left"
@@ -192,7 +191,7 @@
                 <TabItem Header="Dumping" Style="{DynamicResource CustomTabItemStyle}">
                     <StackPanel>
                         <GroupBox Margin="5,5,5,5" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Header="Dumping">
-                            <UniformGrid Columns="2" Rows="6">
+                            <UniformGrid Columns="2" Rows="7">
                                 <CheckBox VerticalAlignment="Center" Content="Show Disc Info"
                                      IsChecked="{Binding Options.PromptForDiscInformation}"
                                      ToolTip="Enable showing the media information output after dumping" Margin="0,4"
@@ -244,6 +243,12 @@
                                      ToolTip="Compress output log files to reduce space" Margin="0,4"
                                      />
 
+                                <Label VerticalAlignment="Center" Content="Log Compression:" HorizontalAlignment="Right" />
+                                <ComboBox x:Name="LogCompressionComboBox" Height="22" Width="200" HorizontalAlignment="Left"
+                                          ItemsSource="{Binding LogCompressions}" SelectedItem="{Binding Options.LogCompression, Converter={StaticResource ElementConverter}, Mode=TwoWay}"
+                                          Style="{DynamicResource CustomComboBoxStyle}" IsEnabled="{Binding Options.CompressLogFiles}"
+                                />
+
                                 <CheckBox VerticalAlignment="Center" Content="Delete Unnecessary Files"
                                      IsChecked="{Binding Options.DeleteUnnecessaryFiles}"
                                      ToolTip="Delete unnecesary output files to reduce space" Margin="0,4"
@@ -403,12 +408,16 @@
                         </GroupBox>
 
                         <GroupBox Margin="5,5,5,5" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Header="Redumper">
-                            <UniformGrid Columns="2" Rows="7">
+                            <UniformGrid Columns="2" Rows="8">
                                 <CheckBox VerticalAlignment="Center" Content="Enable Verbose Output"
                                           IsChecked="{Binding Options.RedumperEnableVerbose}"
                                           ToolTip="Enable verbose output in logs" Margin="0,4"
                                 />
-                                <Label/> <!-- Empty label for padding -->
+
+                                <CheckBox VerticalAlignment="Center" Content="Enable Refine Sector Mode Flag"
+                                          IsChecked="{Binding Options.RedumperRefineSectorMode}"
+                                          ToolTip="Enable the refine sector mode flag by default" Margin="0,4"
+                                />
 
                                 <Label Content="Reread Tries:" VerticalAlignment="Center" HorizontalAlignment="Right"/>
                                 <TextBox VerticalAlignment="Center" VerticalContentAlignment="Center" Width="200" HorizontalAlignment="Left"
@@ -472,7 +481,8 @@
                                     IsEnabled="{Binding Options.RetrieveMatchInformation}" />
 
                                 <Label VerticalAlignment="Center" HorizontalAlignment="Right" Content="Password" />
-                                <PasswordBox x:Name="RedumpPasswordBox" Height="22" HorizontalAlignment="Stretch" PasswordChar="*" />
+                                <PasswordBox x:Name="RedumpPasswordBox" Height="22" HorizontalAlignment="Stretch" PasswordChar="*"
+                                             IsEnabled="{Binding Options.RetrieveMatchInformation}"/>
 
                                 <Button x:Name="RedumpLoginTestButton" Height="22" Width="80" Content="Test Login"
                                         Style="{DynamicResource CustomButtonStyle}"

publish-nix.sh

@@ -81,31 +81,31 @@ function download_programs() {
     declare -A DL_MAP
 
     # Aaru
-    DL_MAP["Aaru_linux-arm64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_linux_arm64.tar.gz"
-    DL_MAP["Aaru_linux-x64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_linux_amd64.tar.gz"
-    DL_MAP["Aaru_osx-arm64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_macos.zip"
-    DL_MAP["Aaru_osx-x64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_macos.zip"
-    DL_MAP["Aaru_win-arm64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_windows_aarch64.zip"
-    DL_MAP["Aaru_win-x86"]="https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_windows_x86.zip"
-    DL_MAP["Aaru_win-x64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_windows_x64.zip"
+    DL_MAP["Aaru_linux-arm64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_linux_arm64.tar.gz"
+    DL_MAP["Aaru_linux-x64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_linux_amd64.tar.gz"
+    DL_MAP["Aaru_osx-arm64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_macos-aarch64.zip"
+    DL_MAP["Aaru_osx-x64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_macos.zip"
+    DL_MAP["Aaru_win-arm64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_windows_aarch64.zip"
+    DL_MAP["Aaru_win-x86"]="https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_windows_x64.zip"
+    DL_MAP["Aaru_win-x64"]="https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_windows_x64.zip"
 
     # DiscImageCreator
     DL_MAP["Creator_linux-arm64"]=""
-    DL_MAP["Creator_linux-x64"]="https://github.com/user-attachments/files/20000183/DiscImageCreator_20250501.tar.gz"
+    DL_MAP["Creator_linux-x64"]="https://github.com/user-attachments/files/22080484/DiscImageCreator_20250901.tar.gz"
     DL_MAP["Creator_osx-arm64"]="https://github.com/user-attachments/files/20000184/DiscImageCreator_20250501.zip"
     DL_MAP["Creator_osx-x64"]="https://github.com/user-attachments/files/20000184/DiscImageCreator_20250501.zip"
     DL_MAP["Creator_win-arm64"]=""
-    DL_MAP["Creator_win-x86"]="https://github.com/user-attachments/files/20000181/DiscImageCreator_20250501.zip"
-    DL_MAP["Creator_win-x64"]="https://github.com/user-attachments/files/20000181/DiscImageCreator_20250501.zip"
+    DL_MAP["Creator_win-x86"]="https://github.com/user-attachments/files/22080480/DiscImageCreator_20250901.zip"
+    DL_MAP["Creator_win-x64"]="https://github.com/user-attachments/files/22080480/DiscImageCreator_20250901.zip"
 
     # Redumper
-    DL_MAP["Redumper_linux-arm64"]=""
-    DL_MAP["Redumper_linux-x64"]="https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Linux64.zip"
-    DL_MAP["Redumper_osx-arm64"]="https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Darwin64.zip"
-    DL_MAP["Redumper_osx-x64"]="https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Darwin64.zip"
-    DL_MAP["Redumper_win-arm64"]=""
-    DL_MAP["Redumper_win-x86"]="https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Windows32.zip"
-    DL_MAP["Redumper_win-x64"]="https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Windows64.zip"
+    DL_MAP["Redumper_linux-arm64"]="https://github.com/superg/redumper/releases/download/b655/redumper-b655-linux-arm64.zip"
+    DL_MAP["Redumper_linux-x64"]="https://github.com/superg/redumper/releases/download/b655/redumper-b655-linux-x64.zip"
+    DL_MAP["Redumper_osx-arm64"]="https://github.com/superg/redumper/releases/download/b655/redumper-b655-macos-arm64.zip"
+    DL_MAP["Redumper_osx-x64"]=""
+    DL_MAP["Redumper_win-arm64"]="https://github.com/superg/redumper/releases/download/b655/redumper-b655-windows-arm64.zip"
+    DL_MAP["Redumper_win-x86"]="https://github.com/superg/redumper/releases/download/b655/redumper-b655-windows-x86.zip"
+    DL_MAP["Redumper_win-x64"]="https://github.com/superg/redumper/releases/download/b655/redumper-b655-windows-x64.zip"
 
     # Download and extract files
     echo "===== Downloading Required Programs ====="

publish-win.ps1

@@ -70,31 +70,31 @@ function Download-Programs {
     $DL_PREFIXES = ("Aaru", "Creator", "Redumper")
     $DL_MAP = @{
         # Aaru
-        "Aaru_linux-arm64"     = "https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_linux_arm64.tar.gz"
-        "Aaru_linux-x64"       = "https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_linux_amd64.tar.gz"
-        "Aaru_osx-arm64"       = "https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_macos.zip"
-        "Aaru_osx-x64"         = "https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_macos.zip"
-        "Aaru_win-arm64"       = "https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_windows_aarch64.zip"
-        "Aaru_win-x86"         = "https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_windows_x86.zip"
-        "Aaru_win-x64"         = "https://github.com/aaru-dps/Aaru/releases/download/v5.3.2/aaru-5.3.2_windows_x64.zip"
+        "Aaru_linux-arm64"     = "https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_linux_arm64.tar.gz"
+        "Aaru_linux-x64"       = "https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_linux_amd64.tar.gz"
+        "Aaru_osx-arm64"       = "https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_macos-aarch64.zip"
+        "Aaru_osx-x64"         = "https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_macos.zip"
+        "Aaru_win-arm64"       = "https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_windows_aarch64.zip"
+        "Aaru_win-x86"         = "https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_windows_x64.zip"
+        "Aaru_win-x64"         = "https://github.com/aaru-dps/Aaru/releases/download/v5.4.1/aaru-5.4.1_windows_x64.zip"
 
         # DiscImageCreator
         "Creator_linux-arm64"  = ""
-        "Creator_linux-x64"    = "https://github.com/user-attachments/files/20000183/DiscImageCreator_20250501.tar.gz"
+        "Creator_linux-x64"    = "https://github.com/user-attachments/files/22080484/DiscImageCreator_20250901.tar.gz"
         "Creator_osx-arm64"    = "https://github.com/user-attachments/files/20000184/DiscImageCreator_20250501.zip"
         "Creator_osx-x64"      = "https://github.com/user-attachments/files/20000184/DiscImageCreator_20250501.zip"
         "Creator_win-arm64"    = ""
-        "Creator_win-x86"      = "https://github.com/user-attachments/files/20000181/DiscImageCreator_20250501.zip"
-        "Creator_win-x64"      = "https://github.com/user-attachments/files/20000181/DiscImageCreator_20250501.zip"
+        "Creator_win-x86"      = "https://github.com/user-attachments/files/22080480/DiscImageCreator_20250901.zip"
+        "Creator_win-x64"      = "https://github.com/user-attachments/files/22080480/DiscImageCreator_20250901.zip"
 
         # Redumper
-        "Redumper_linux-arm64" = ""
-        "Redumper_linux-x64"   = "https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Linux64.zip"
-        "Redumper_osx-arm64"   = "https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Darwin64.zip"
-        "Redumper_osx-x64"     = "https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Darwin64.zip"
-        "Redumper_win-arm64"   = ""
-        "Redumper_win-x86"     = "https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Windows32.zip"
-        "Redumper_win-x64"     = "https://github.com/superg/redumper/releases/download/build_631/redumper-2025.07.14_build631-Windows64.zip"
+        "Redumper_linux-arm64" = "https://github.com/superg/redumper/releases/download/b655/redumper-b655-linux-arm64.zip"
+        "Redumper_linux-x64"   = "https://github.com/superg/redumper/releases/download/b655/redumper-b655-linux-x64.zip"
+        "Redumper_osx-arm64"   = "https://github.com/superg/redumper/releases/download/b655/redumper-b655-macos-arm64.zip"
+        "Redumper_osx-x64"     = ""
+        "Redumper_win-arm64"   = "https://github.com/superg/redumper/releases/download/b655/redumper-b655-windows-arm64.zip"
+        "Redumper_win-x86"     = "https://github.com/superg/redumper/releases/download/b655/redumper-b655-windows-x86.zip"
+        "Redumper_win-x64"     = "https://github.com/superg/redumper/releases/download/b655/redumper-b655-windows-x64.zip"
     }
 
     # Download and extract files