Migrate spelling-0.0.21 changes from main

Show a validation warning when someone sets a `setColorScheme` action
with an invalid scheme

In the setting validation phase, scan all commands for all the "set
color scheme" actions, and check each of them has a valid scheme. If any
of them has an invalid scheme name, raise a warning. Do not check
iterable commands that will be expanded to valid color schemes.

## Validation Steps Performed
- Added tests to LocalTests_SettingsModel
- Manual tests, add commands to settings.json with invalid color scheme
  and check the warning pops up. Try simple and nested commands.

Closes #7221

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,12 @@
+blank_issues_enabled: true
+
+contact_links:
+  - name: Microsoft Security Response Center 🔐
+    url: https://msrc.microsoft.com/create-report
+    about: Please report security vulnerabilities here.
+  - name: Windows Terminal Documentation issue 📄
+    url: https://github.com/MicrosoftDocs/terminal/issues/new
+    about: Report issues with the documentation for the Windows Terminal (in docs.microsoft.com/windows/terminal)
+  - name: Console Documentation issue 📄
+    url: https://github.com/MicrosoftDocs/console-docs/issues/new
+    about: Report issues with the documentation for the Console (in docs.microsoft.com/windows/console)

.github/workflows/linter.yml

@@ -1,57 +0,0 @@
----
-###########################
-###########################
-## Linter GitHub Actions ##
-###########################
-###########################
-name: Lint Code Base
-
-#
-# Documentation:
-# https://help.github.com/en/articles/workflow-syntax-for-github-actions
-#
-
-###################################################
-# The linter is noisy; we used to run it on push. #
-###################################################
-#
-#on:
-#  pull_request:
-#    branches: [main]
-
-###############
-# Set the Job #
-###############
-jobs:
-  build:
-    # Name the Job
-    name: Lint Code Base
-    # Set the agent to run on
-    runs-on: ubuntu-latest
-
-    ##################
-    # Load all steps #
-    ##################
-    steps:
-      ##########################
-      # Checkout the code base #
-      ##########################
-      - name: Checkout Code
-        uses: actions/checkout@v2
-        with:
-          # Full git history is needed to get a proper list of changed files within `super-linter`
-          fetch-depth: 0
-
-      ################################
-      # Run Linter against code base #
-      ################################
-      - name: Lint Code Base
-        uses: github/super-linter@v3
-        env:
-          VALIDATE_ALL_CODEBASE: false
-          DEFAULT_BRANCH: main
-          MARKDOWN_CONFIG_FILE: .markdown-lint.yml
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          VALIDATE_EDITORCONFIG: false
-          # The json linter doesn't like JSONC, which we use all over. So just disable it.
-          VALIDATE_JSON: false

custom.props

@@ -5,7 +5,7 @@
     <XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
     <XesBaseYearForStoreVersion>2020</XesBaseYearForStoreVersion>
     <VersionMajor>1</VersionMajor>
-    <VersionMinor>5</VersionMinor>
+    <VersionMinor>6</VersionMinor>
     <VersionInfoProductName>Windows Terminal</VersionInfoProductName>
   </PropertyGroup>
 </Project>

doc/AddASetting.md

@@ -5,9 +5,9 @@
       `.../console/published/wincon.w` in the OS repo when you submit the PR.
       The branch won't build without it.
     * For now, you can update winconp.h with your consumable changes.
-    * define registry name (ex `CONSOLE_REGISTRY_CURSORCOLOR`)
-    * add the setting to `CONSOLE_STATE_INFO`
-    * define the property key ID and the property key itself
+    * Define registry name (ex `CONSOLE_REGISTRY_CURSORCOLOR`)
+    * Add the setting to `CONSOLE_STATE_INFO`
+    * Define the property key ID and the property key itself.
         - Yes, the large majority of the `DEFINE_PROPERTYKEY` defs are the same, it's only the last byte of the guid that changes
 
 2. Add matching fields to Settings.hpp

doc/WIL.md

@@ -9,13 +9,13 @@ The primary usages of WIL in our code so far are...
 
 ### Smart Pointers ###
 
-Inside [wil\resource.h](https://github.com/microsoft/wil/blob/master/include/wil/resource.h) are smart pointer like classes for many Windows OS resources like file handles, socket handles, process handles, and so on. They're of the form `wil::unique_handle` and call the appropriate/matching OS function (like `CloseHandle()` in this case) when they go out of scope.
+Inside [wil/resource.h](https://github.com/microsoft/wil/blob/master/include/wil/resource.h) are smart pointer like classes for many Windows OS resources like file handles, socket handles, process handles, and so on. They're of the form `wil::unique_handle` and call the appropriate/matching OS function (like `CloseHandle()` in this case) when they go out of scope.
 
 Another useful item is `wil::make_unique_nothrow()` which is analogous to `std::make_unique` (except without the exception which might help you integrate with existing exception-free code in the console.) This will return a `wistd::unique_ptr` (vs. a `std::unique_ptr`) which can be used in a similar manner.
 
 ### Result Handling ###
 
-To manage the various types of result codes that come back from Windows APIs, the file [wil\result.h](https://github.com/microsoft/wil/blob/master/include/wil/result.h) provides a wealth of macros that can help. 
+To manage the various types of result codes that come back from Windows APIs, the file [wil/result.h](https://github.com/microsoft/wil/blob/master/include/wil/result.h) provides a wealth of macros that can help. 
 
 As an example, the method `DuplicateHandle()` returns a `BOOL` value that is `FALSE` under failure and would like you to `GetLastError()` from the operating system to find out what the actual result code is. In this circumstance, you could use the macro `RETURN_IF_WIN32_BOOL_FALSE` to wrap the call to `DuplicateHandle()` which would automatically handle this pattern for you and return the `HRESULT` equivalent on failure.
 

doc/cascadia/Json-Utility-API.md

@@ -8,19 +8,20 @@ return a JSON value coerced into the specified type.
 When reading into existing storage, it returns a boolean indicating whether that storage was modified.
 
 If the JSON value cannot be converted to the specified type, an exception will be generated.
+For non-nullable type conversions (most POD types), `null` is considered to be an invalid type.
 
 ```c++
 std::string one;
 std::optional<std::string> two;
 
 JsonUtils::GetValue(json, one);
-// one is populated or unchanged.
+// one is populated or an exception is thrown.
 
 JsonUtils::GetValue(json, two);
-// two is populated, nullopt or unchanged
+// two is populated, nullopt or an exception is thrown
 
 auto three = JsonUtils::GetValue<std::string>(json);
-// three is populated or zero-initialized
+// three is populated or an exception is thrown
 
 auto four = JsonUtils::GetValue<std::optional<std::string>>(json);
 // four is populated or nullopt
@@ -225,14 +226,14 @@ auto v = JsonUtils::GetValue<int>(json, conv);
 
 -|json type invalid|json null|valid
 -|-|-|-
-`T`|❌ exception|🔵 unchanged|✔ converted
+`T`|❌ exception|❌ exception|✔ converted
 `std::optional<T>`|❌ exception|🟨 `nullopt`|✔ converted
 
 ### GetValue&lt;T&gt;() (returning)
 
 -|json type invalid|json null|valid
 -|-|-|-
-`T`|❌ exception|🟨 `T{}` (zero value)|✔ converted
+`T`|❌ exception|❌ exception|✔ converted
 `std::optional<T>`|❌ exception|🟨 `nullopt`|✔ converted
 
 ### GetValueForKey(T&) (type-deducing)
@@ -242,14 +243,14 @@ a "key not found" state. The remaining three cases are the same.
 
 val type|key not found|_json type invalid_|_json null_|_valid_
 -|-|-|-|-
-`T`|🔵 unchanged|_❌ exception_|_🔵 unchanged_|_✔ converted_
-`std::optional<T>`|_🔵 unchanged_|_❌ exception_|_🟨 `nullopt`_|_✔ converted_
+`T`|🔵 unchanged|_❌ exception_|_❌ exception_|_✔ converted_
+`std::optional<T>`|🔵 unchanged|_❌ exception_|_🟨 `nullopt`_|_✔ converted_
 
 ### GetValueForKey&lt;T&gt;() (return value)
 
 val type|key not found|_json type invalid_|_json null_|_valid_
 -|-|-|-|-
-`T`|🟨 `T{}` (zero value)|_❌ exception_|_🟨 `T{}` (zero value)_|_✔ converted_
+`T`|🟨 `T{}` (zero value)|_❌ exception_|_❌ exception_|_✔ converted_
 `std::optional<T>`|🟨 `nullopt`|_❌ exception_|_🟨 `nullopt`_|_✔ converted_
 
 ### Future Direction

doc/cascadia/profiles.schema.json

@@ -27,11 +27,30 @@
       "type": "string"
     },
     "BellStyle": {
-      "enum": [
-        "none",
-        "audible"
-      ],
-      "type": "string"
+      "oneOf": [
+        {
+          "type": "boolean"
+        },
+        {
+          "type": "array",
+          "items": {
+            "type": "string",
+            "enum": [
+              "audible",
+              "visual"
+            ]
+          }
+        },
+        {
+          "type": "string",
+          "enum": [
+            "audible",
+            "visual",
+            "all",
+            "none"
+          ]
+        }
+      ]
     },
     "ProfileGuid": {
       "default": "{}",
@@ -58,6 +77,7 @@
         "duplicateTab",
         "find",
         "moveFocus",
+        "moveTab",
         "newTab",
         "nextTab",
         "openNewTabDropdown",
@@ -98,6 +118,13 @@
       ],
       "type": "string"
     },
+    "MoveTabDirection": {
+      "enum": [
+        "forward",
+        "backward"
+      ],
+      "type": "string"
+    },
     "SplitState": {
       "enum": [
         "vertical",
@@ -161,6 +188,11 @@
         "index": {
           "type": "integer",
           "description": "The index of the profile in the new tab dropdown (starting at 0)"
+        },
+        "tabColor": {
+          "$ref": "#/definitions/Color",
+          "default": null,
+          "description": "If provided, will set the tab's color to the given value"
         }
       },
       "type": "object"
@@ -474,6 +506,22 @@
         }
       ]
     },
+    "MoveTabAction": {
+      "description": "Arguments for moving a tab",
+      "allOf": [
+        { "$ref": "#/definitions/ShortcutAction" },
+        {
+          "properties": {
+            "action": { "type": "string", "pattern": "moveTab" },
+            "direction": {
+              "$ref": "#/definitions/MoveTabDirection",
+              "description": "The direction to move the tab"
+            }
+          }
+        }
+      ],
+      "required": [ "direction" ]
+    },
     "Keybinding": {
       "additionalProperties": false,
       "properties": {
@@ -497,6 +545,7 @@
               { "$ref": "#/definitions/CloseTabsAfterAction" },
               { "$ref": "#/definitions/ScrollUpAction" },
               { "$ref": "#/definitions/ScrollDownAction" },
+              { "$ref": "#/definitions/MoveTabAction" },
               { "type": "null" }
             ]
         },
@@ -625,7 +674,7 @@
         },
         "rowsToScroll": {
           "default": "system",
-          "description": "This parameter once allowed you to override the systemwide \"choose how many lines to scroll at one time\" setting. It no longer does so.",
+          "description": "This parameter once allowed you to override the systemwide \"choose how many lines to scroll at one time\" setting. It no longer does so. However, you can customize the number of lines to scroll in \"scrollUp\" and \"scrollDown\" bindings.",
           "maximum": 999,
           "minimum": 0,
           "type": [ "integer", "string" ],
@@ -685,8 +734,38 @@
         },
         "useTabSwitcher": {
           "default": true,
-          "description": "When set to \"true\", the \"nextTab\" and \"prevTab\" commands will use the tab switcher UI.",
-          "type": "boolean"
+          "description": "Deprecated. Please use \"tabSwitcherMode\" instead.",
+          "oneOf": [
+            {
+              "type": "boolean"
+            },
+            {
+              "enum": [
+                "mru",
+                "inOrder",
+                "disabled"
+              ],
+              "type": "string"
+            }
+          ],
+          "deprecated": true
+        },
+        "tabSwitcherMode": {
+          "default": "inOrder",
+          "description": "When set to \"true\" or \"mru\", the \"nextTab\" and \"prevTab\" commands will use the tab switcher UI, with most-recently-used ordering. When set to \"inOrder\", these actions will switch tabs in their current ordering. Set to \"false\" to disable the tab switcher.",
+          "oneOf": [
+            {
+              "type": "boolean"
+            },
+            {
+              "enum": [
+                "mru",
+                "inOrder",
+                "disabled"
+              ],
+              "type": "string"
+            }
+          ]
         }
       },
       "required": [
@@ -723,7 +802,16 @@
         },
         "backgroundImage": {
           "description": "Sets the file location of the image to draw over the window background.",
-          "type": ["string", "null"]
+          "oneOf": [
+            {
+              "type": ["string", null]
+            },
+            {
+              "enum": [
+                "desktopWallpaper"
+              ]
+            }
+          ]
         },
         "backgroundImageAlignment": {
           "default": "center",
@@ -761,7 +849,7 @@
         },
         "bellStyle": {
           "default": "audible",
-          "description": "Controls what happens when the application emits a BEL character. When set to \"audible\", the Terminal will play a sound. When set to \"none\", nothing will happen.",
+          "description": "Controls what happens when the application emits a BEL character. When set to \"all\", the Terminal will play a sound and flash the taskbar icon. An array of specific behaviors can also be used. Supported array values include `audible` and `visual`. When set to \"none\", nothing will happen.",
           "$ref": "#/definitions/BellStyle"
         },
         "closeOnExit": {

doc/reference/Build-SupportedSequenceIndex.ps1

@@ -0,0 +1,239 @@
+#requires -version 6.1
+
+<#
+.SYNOPSIS
+Scan source code and build a list of supported VT sequences.
+.DESCRIPTION
+Scan source code and build a list of supported VT sequences.
+TODO: add more details
+#>
+[cmdletbinding(DefaultParameterSetName="stdout")]
+param(
+    [parameter(ParameterSetName="file", mandatory)]
+    [string]$OutFile,
+    [parameter(ParameterSetName="file")]
+    [switch]$Force, # for overwriting $OutFile if it exists
+
+    [parameter(ParameterSetName="stdout")]
+    [parameter(ParameterSetName="file")]
+    [switch]$NoLogo, # no logo in summary
+    [parameter(ParameterSetName="stdout")]
+    [switch]$SummaryOnly, # no markdown generated
+    [parameter(ParameterSetName="stdout")]
+    [parameter(ParameterSetName="file")]
+    [switch]$Quiet, # no summary or logo
+
+    [parameter(ParameterSetName="file")]
+    [parameter(ParameterSetName="stdout")]
+    [string]$SolutionRoot = "..\..",
+    [parameter(ParameterSetName="file")]
+    [parameter(ParameterSetName="stdout")]
+    [string]$InterfacePath = $(join-path $solutionRoot "src\terminal\adapter\ITermDispatch.hpp"),
+    [parameter(ParameterSetName="file")]
+    [parameter(ParameterSetName="stdout")]
+    [string]$ConsoleAdapterPath = $(join-path $solutionRoot "src\terminal\adapter\adaptDispatch.hpp"),
+    [parameter(ParameterSetName="file")]
+    [parameter(ParameterSetName="stdout")]
+    [string]$TerminalAdapterPath = $(join-path $solutionRoot "src\cascadia\terminalcore\terminalDispatch.hpp")
+)
+
+if ($PSCmdlet.ParameterSetName -eq "stdout") {
+    Write-Verbose "Emitting markdown to STDOUT"
+}
+
+<#
+    GLOBALS
+#>
+
+[semver]$myVer = "0.6-beta"
+$sequences = import-csv ".\master-sequence-list.csv"
+$base = @{}
+$conhost = @{}
+$terminal = @{}
+$prefix = "https://vt100.net/docs/vt510-rm/"
+$repo = "https://github.com/oising/terminal/tree/master"
+$conhostUrl = $ConsoleAdapterPath.TrimStart($SolutionRoot).replace("\", "/")
+$terminalUrl = $TerminalAdapterPath.TrimStart($SolutionRoot).replace("\", "/")
+
+function Read-SourceFiles {
+    # extract base interface
+    $baseScanner = [regex]'(?x)virtual\s\w+\s(?<method>\w+)(?s)[^;]+;(?-s).*?(?<seq>(?<=\/\/\s).+)'
+
+    $baseScanner.Matches(($src = get-content -raw $interfacePath)) | foreach-object {
+        $match = $_
+        #$line = (($src[0..$_.Index] -join "") -split "`n").Length
+        #$decl = $_.groups[0].value
+        $_.groups["seq"].value.split(",") | ForEach-Object {
+            $SCRIPT:base[$_.trim()] = $match.groups["method"].value
+        }
+    }
+
+    # match overrides of ITermDispatch
+    $scanner = [regex]'(?x)\s+\w+\s(?<method>\w+)(?s)[^;]+override;'
+
+    $scanner.Matches(($src = Get-Content -raw $consoleAdapterPath)) | ForEach-Object {
+        $line = (($src[0..$_.Index] -join "") -split "`n").Length
+        $SCRIPT:conhost[$_.groups["method"].value] = $line
+    }
+
+    $scanner.Matches(($src = Get-Content -raw $terminalAdapterPath)) | ForEach-Object {
+        $line = (($src[0..$_.Index] -join "") -split "`n").Length
+        #write-verbose $_.groups[0].value
+        $SCRIPT:terminal[$_.groups["method"].value] = $line
+    }
+}
+
+function Get-SequenceIndexMarkdown {
+    # "Sequence","Parent","Description","Origin","Heading","Subheading", "ImplementedBy", "ConsoleHost","Terminal"
+
+    $heading = $null
+    $subheading = $null
+<#
+    Emit markdown
+
+    TODO:
+    - auto-generate TOC
+#>
+@"
+# VT Function Support
+
+## Table of Contents
+
+* [Code Extension Functions](#code-extension-functions)
+    * [Control Coding](#control-coding)
+    * [Character Coding](#character-coding)
+    * [Graphic Character Sets](#graphic-character-sets)
+* [Terminal Management Functions](#terminal-management-functions)
+    * [Identification, status, and Initialization](#identification-status-and-initialization)
+    * [Emulations](#emulations)
+    * [Set-Up](#set-up)
+* [Display Coordinate System and Addressing](#display-coordinate-system-and-addressing)
+    * [Active Position and Cursor](#active-position-and-cursor)
+    * [Margins and Scrolling](#margins-and-scrolling)
+    * [Cursor Movement](#cursor-movement)
+    * [Horizontal Tabulation](#horizontal-tabulation)
+    * [Page Size and Arrangement](#page-size-and-arrangement)
+    * [Page Movement](#page-movement)
+    * [Status Display](#status-display)
+    * [Right to Left](#right-to-left)
+* [Window Management](#window-management)
+* [Visual Attributes and Renditions](#visual-attributes-and-renditions)
+    * [Line Renditions](#line-renditions)
+    * [Character Renditions](#character-renditions)
+* [Audible Indicators](#audible-indicators)
+* [Mode States](#mode-states)
+    * [ANSI](#ansi)
+    * [DEC Private](#dec-private)
+* [Editing Functions](#editing-functions)
+* [OLTP Features](#OLTP-features)
+    * [Rectangular Area Operations](#rectangular-area-operations)
+    * [Data Integrity](#data-integrity)
+    * [Macros](#macros)
+* [Saving and Restoring Terminal State](#saving-and-restoring-terminal-state)
+    * [Cursor Save Buffer](#cursor-save-buffer)
+    * [Terminal State Interrogation](#terminal-state-interrogation)
+* [Keyboard Processing Functions](#keyboard-processing-functions)
+* [Soft Key Mapping (UDK)](#soft-key-mapping-UDK)
+* [Soft Fonts (DRCS)](#soft-fonts-drcs)
+* [Printing](#printing)
+* [Terminal Communication and Synchronization](#terminal-communication-and-synchronization)
+* [Text Locator Extension](#text-locator-extension)
+* [Session Management Extension](#session-management-extension)
+* [Documented Exceptions](#documented-exceptions)
+
+$($sequences | ForEach-Object {
+    if ($method = $base[$_.sequence]) {
+        $_.ImplementedBy = $method
+        $_.ConsoleHost = $conhost[$method]
+        $_.Terminal = $terminal[$method]
+    }
+    # "Sequence","Associated","Description","Origin","Heading","Subheading", "ImplementedBy", "ConsoleHost","Terminal"
+    $c0 = "[$($_.Sequence)]($prefix$($_.sequence).html ""View page on vt100.net"")"
+    $c1 = "$($_.description)"
+    $c2 = "$($_.origin)"
+    $c3 = $(if ($_.consolehost) {"[&#x2713;](${repo}/${conhostUrl}#L$($_.consolehost) ""View console host implementation"")"})
+    $c4 = $(if ($_.terminal) {"[&#x2713;](${repo}/${terminalUrl}#L$($_.terminal)} ""View windows terminal implementation"")"})
+
+    $shouldRenderHeader = $false
+
+    if ($heading -ne $_.heading) {
+        $heading = $_.heading
+@"
+
+## $heading
+
+"@
+        $shouldRenderHeader = $true
+    }
+
+    if ($subheading -ne $_.subheading) {
+        $subheading = $_.subheading
+@"
+
+### $subheading
+
+"@
+        $shouldRenderHeader = $true
+    }
+
+    if ($shouldRenderHeader) {
+@"
+
+|Symbol|Function|Origin&nbsp;&#x1F5B3;|Console Host|Terminal|
+|:-|:--|:--:|:--:|:--:|
+"@
+    }
+@"
+
+|$c0|$c1|$c2|$c3|$c4|
+"@
+})
+
+---
+Generated on $(get-date -DisplayHint DateTime)
+"@
+}
+
+function Show-Summary {
+    write-host "`n$(' '*7)Windows Terminal Sequencer v${myVer}"
+    if (-not $NoLogo.IsPresent) {
+        Get-Content .\windows-terminal-logo.ans | ForEach-Object { Write-Host $_ }
+    }
+    $summary = @"
+       `e[1mSequence Support:`e[0m
+
+       `e[7m {0:000} `e[0m known in master-sequence-list.csv.
+       `e[7m {1:000} `e[0m common members in ITermDispatch base, of which:
+       `e[7m {2:000} `e[0m are implemented by ConsoleHost.
+       `e[7m {3:000} `e[0m are implemented by Windows Terminal.
+
+"@ -f $sequences.Count, $base.count, $conhost.count, $terminal.Count
+
+    write-host $summary
+}
+
+<#
+    Entry Point
+#>
+
+Read-SourceFiles
+
+if (-not $SummaryOnly.IsPresent) {
+
+    $markdown = Get-SequenceIndexMarkdown
+
+    if ($PSCmdlet.ParameterSetName -eq "file") {
+        # send to file and overwrite
+        $markdown | Out-File -FilePath $OutFile -Force:$Force.IsPresent -Encoding utf8NoBOM
+    } else {
+        # send to STDOUT
+        $markdown
+    }
+
+    if (-not $Quiet.IsPresent) {
+        Show-Summary
+    }
+} else {
+    # summary only
+    Show-Summary
+}

doc/reference/master-sequence-list.csv

@@ -0,0 +1,224 @@
+"Sequence","Parent","Description","Origin","Heading","Subheading","ImplementedBy","ConsoleHost","Terminal"
+"CAN","","Cancel","`VT100`","Code Extension Functions","Control Coding","","",""
+"SUB","","Substitute","`VT100`","Code Extension Functions","Control Coding","","",""
+"ESC","","Escape","`VT100`","Code Extension Functions","Control Coding","","",""
+"DCS","","Device Control String","`VT220`","Code Extension Functions","Control Coding","","",""
+"CSI","","Control Sequence Introducer","`VT100`","Code Extension Functions","Control Coding","","",""
+"ST","","String Terminator","`VT220`","Code Extension Functions","Control Coding","","",""
+"OSC","","Operating System Command","`DECterm`","Code Extension Functions","Control Coding","","",""
+"PM","","Privacy Message","``","Code Extension Functions","Control Coding","","",""
+"APC","","Application Program Command","`VT420`","Code Extension Functions","Control Coding","","",""
+"S7C1T","","Select 7-bit C1 Transmission","`VT220`","Code Extension Functions","Control Coding","","",""
+"S8C1T","","Select 8-bit C1 Transmission","`VT220`","Code Extension Functions","Control Coding","","",""
+"LS0","","Locking Shift Zero (SI)","`VT100`","Code Extension Functions","Character Coding","","",""
+"LS1","","Locking Shift One (SO)","`VT100`","Code Extension Functions","Character Coding","","",""
+"LS2","","Locking Shift Two","`VT220`","Code Extension Functions","Character Coding","","",""
+"LS3","","Locking Shift Three","`VT220`","Code Extension Functions","Character Coding","","",""
+"LS1R","","Locking Shift One Right","`VT220`","Code Extension Functions","Character Coding","","",""
+"LS2R","","Locking Shift Two Right","`VT220`","Code Extension Functions","Character Coding","","",""
+"LS3R","","Locking Shift Three Right","`VT220`","Code Extension Functions","Character Coding","","",""
+"SS2","","Single Shift Two","`VT220`","Code Extension Functions","Character Coding","","",""
+"SS3","","Single Shift Three","`VT220`","Code Extension Functions","Character Coding","","",""
+"SCS","","Select Character Set","`VT100`","Code Extension Functions","Graphic Character Sets","","",""
+"DECNRCM","","(National Replacement) Character Set Mode","`VT220`","Code Extension Functions","Graphic Character Sets","","",""
+"DECAUPSS","","Assign User-Preference Supplemental Set","`VT320`","Code Extension Functions","Graphic Character Sets","","",""
+"DECRQUPSS","","Request User-Preference Supplemental Set","`VT320`","Code Extension Functions","Graphic Character Sets","","",""
+"DA1","","Primary Device Attributes","`VT100`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DA2","","Secondary Device Attributes","`VT220`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DA3","","Tertiary Device Attributes","`VT420`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DSR","","Device Status Report","`VT100`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECID","","Identify Device","`VT100`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECTID","","Select Terminal ID","`VT510`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECSCL","","Select Conformance Level","`VT220`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECSR","","Secure Reset","`VT420`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECSRC","","Secure Reset Confirmation","`VT420`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECSTR","","Soft Terminal Reset","`VT220`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECSTUI","","Set Terminal Unit ID (Restricted)","`VT420`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"RIS","","Reset to Initial state","`VT100`","Terminal Management Functions","Identification, status, and Initialization","","",""
+"DECPCTERM","","Enter/Exit PC Term Mode from DEC VT mode","`VT420PC`","Terminal Management Functions","Emulations","","",""
+"DECTME","","Terminal Mode Emulation","`VT510`","Terminal Management Functions","Emulations","","",""
+"DECSSL","","Select Set-Up Language","`VT510`","Terminal Management Functions","Set-Up","","",""
+"DECCRTSM","","CRT Save Mode (not required)","`VT510`","Terminal Management Functions","Set-Up","","",""
+"DECOSCNM","","Overscan Mode","`VT510`","Terminal Management Functions","Set-Up","","",""
+"DECSRFR","","Select Refresh Rate","`VT510`","Terminal Management Functions","Set-Up","","",""
+"DECLTOD","","Load Time of Day","`VT510`","Terminal Management Functions","Set-Up","","",""
+"DECLBAN","","Load Banner Message","`VT510`","Terminal Management Functions","Set-Up","","",""
+"DECTCEM","","Text Cursor Enable Mode","`VT220`","Display Coordinate System and Addressing","Active Position and Cursor","","",""
+"DECSCUSR","","Set Cursor Style","`VT510`","Display Coordinate System and Addressing","Active Position and Cursor","","",""
+"DECSTBM","","Set Top and Bottom Margin","`VT100`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"DECSLRM","","Set Left and Right Margin","`VT420`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"DECLRMM","","Left Right Margin Mode","`VT420`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"DECOM","","Origin Mode","`VT100`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"DECSCLM","","Scrolling Mode","`VT100`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"IND","","Index","`VT100`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"RI","","Reverse Index","`VT100`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"DECFI","","Forward Index","`VT420`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"DECBI","","Back Index","`VT420`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"DECSSCLS","","Set Scroll Speed","`VT510`","Display Coordinate System and Addressing","Margins and Scrolling","","",""
+"BS","","Backspace","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"LF","","Line Feed","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"VT","","Vertical Tab","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"FF","","Form Feed","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CR","","Carriage Return","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"NEL","","Next Line","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"LNM","","Line Feed/New Line Mode","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CUU","","Cursor Up","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CUD","","Cursor Down","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CUF","","Cursor Forward","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CUB","","Cursor Backward","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CUP","","Cursor Position","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"HVP","","Horizontal/Vertical Position","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"DSR-CPR","","Device Status Report (Cursor Position Report)","`VT100`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"DSR-XCPR","","Device Status Report (Extended Cursor Position Report)","`VT340` `VT420`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CHA","","Cursor Horizontal Absolute","`VT510`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CNL","","Cursor Next Line","`VT510`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"CPL","","Cursor Previous Line","`VT510`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"HPA","","Horizontal Position Absolute","`VT510`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"HPR","","Horizontal Position Relative","`VT510`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"VPA","","Vertical Line Position Absolute","`VT510`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"VPR","","Vertical Position Relative","`VT510`","Display Coordinate System and Addressing","Cursor Movement","","",""
+"HT","","Horizontal Tab","`VT100`","Display Coordinate System and Addressing","Horizontal Tabulation","","",""
+"HTS","","Horizontal Tabulation Set","`VT100`","Display Coordinate System and Addressing","Horizontal Tabulation","","",""
+"TBC","","Tabulation Clear","`VT100`","Display Coordinate System and Addressing","Horizontal Tabulation","","",""
+"CBT","","Cursor Backward Tabulation","`VT510`","Display Coordinate System and Addressing","Horizontal Tabulation","","",""
+"CHT","","Cursor Horizontal Forward Tabulation","`VT510`","Display Coordinate System and Addressing","Horizontal Tabulation","","",""
+"DECST8C","","Set Tab at every 8 columns","`VT420PC`","Display Coordinate System and Addressing","Horizontal Tabulation","","",""
+"DECCOLM","","Column Mode","`VT100`","Display Coordinate System and Addressing","Page Size and Arrangement","","",""
+"DECNCSM","","No Clear Screen on column Mode","`VT510`","Display Coordinate System and Addressing","Page Size and Arrangement","","",""
+"DECSCPP","","Set Columns Per Page","`VT340` `VT420`","Display Coordinate System and Addressing","Page Size and Arrangement","","",""
+"DECSLPP","","Set Lines Per Page","`VT340` `VT420`","Display Coordinate System and Addressing","Page Size and Arrangement","","",""
+"NP","","Next Page","`VT340` `VT420`","Display Coordinate System and Addressing","Page Movement","","",""
+"PP","","Preceding Page","`VT340` `VT420`","Display Coordinate System and Addressing","Page Movement","","",""
+"PPA","","Page Position Absolute","`VT340` `VT420`","Display Coordinate System and Addressing","Page Movement","","",""
+"PPR","","Page Position Relative","`VT340` `VT420`","Display Coordinate System and Addressing","Page Movement","","",""
+"PPB","","Page Position Backward","`VT340` `VT420`","Display Coordinate System and Addressing","Page Movement","","",""
+"DECSASD","","Select Active Status Display","`VT340` `VT320`","Display Coordinate System and Addressing","Status Display","","",""
+"DECSSDT","","Select Status Display Type","`VT340` `VT320`","Display Coordinate System and Addressing","Status Display","","",""
+"DECRLM","","Right to Left Mode","`VT510`","Display Coordinate System and Addressing","Right to Left","","",""
+"DECRLCM","","Right to Left Copy Mode","`VT510`","Display Coordinate System and Addressing","Right to Left","","",""
+"DDD1","","`VT100` mode Hebrew","`VT510`","Display Coordinate System and Addressing","Right to Left","","",""
+"DDD2","","`VT100` mode Hebrew","`VT510`","Display Coordinate System and Addressing","Right to Left","","",""
+"DDD3","","`VT100` mode Hebrew","`VT510`","Display Coordinate System and Addressing","Right to Left","","",""
+"DECHCCM","","Horizontal Cursor Coupling Mode","`VT340` `VT420`","Window Management","Right to Left","","",""
+"DECVCCM","","Vertical Cursor Coupling Mode","`VT340` `VT420`","Window Management","Right to Left","","",""
+"DECPCCM","","Page Cursor Coupling Mode","`VT340` `VT420`","Window Management","Right to Left","","",""
+"DECRQDE","","Request Displayed Extent","`VT340` `VT420`","Window Management","Right to Left","","",""
+"DECSNLS","","Select Number of Lines per Screen (exception)","`VT420`","Window Management","Right to Left","","",""
+"DECARSM","","Auto Resize Mode","`DECterm` `VT420`","Window Management","Right to Left","","",""
+"SU","","Pan Down","`VT340` `VT420`","Window Management","Right to Left","","",""
+"SD","","Pan Up","`VT340` `VT420`","Window Management","Right to Left","","",""
+"DECSCNM","","Screen Mode","`VT100`","Visual Attributes and Renditions","Right to Left","","",""
+"DECSWL","","Single Width Line","`VT100`","Visual Attributes and Renditions","Line Renditions","","",""
+"DECDWL","","Double Width Line","`VT100`","Visual Attributes and Renditions","Line Renditions","","",""
+"DECDHLT","","Double Height Line Top","`VT100`","Visual Attributes and Renditions","Line Renditions","","",""
+"DECDHLB","","Double Height Line Bottom","`VT100`","Visual Attributes and Renditions","Line Renditions","","",""
+"SGR","","Select Graphic Rendition","`VT100`","Visual Attributes and Renditions","Character Renditions","","",""
+"BEL","","Warning Bell","`VT100`","Audible Indicators","Character Renditions","","",""
+"DECSKCV","","Set Keyclick Volume","`VT510`","Audible Indicators","Character Renditions","","",""
+"DECSWBV","","Set Warning Bell Volume","`VT510`","Audible Indicators","Character Renditions","","",""
+"DECSMBV","","Set Margin Bell Volume","`VT510`","Audible Indicators","Character Renditions","","",""
+"IRM","","Insert/Replacement Mode","`VT102`","Editing Functions","DEC Private","","",""
+"ICH","","Insert Character","`VT102`","Editing Functions","DEC Private","","",""
+"DCH","","Delete Character","`VT102`","Editing Functions","DEC Private","","",""
+"IL","","Insert Line","`VT100`","Editing Functions","DEC Private","","",""
+"DL","","Delete Line","`VT100`","Editing Functions","DEC Private","","",""
+"DECIC","","Insert Column","`VT420`","Editing Functions","DEC Private","","",""
+"DECDC","","Delete Column","`VT420`","Editing Functions","DEC Private","","",""
+"ECH","","Erase Character","`VT100`","Editing Functions","DEC Private","","",""
+"EL","","Erase in Line","`VT100`","Editing Functions","DEC Private","","",""
+"DECSEL","","Selective Erase in Line","`VT220`","Editing Functions","DEC Private","","",""
+"ED","","Erase in Display","`VT100`","Editing Functions","DEC Private","","",""
+"DECSED","","Selective Erase in Display","`VT220`","Editing Functions","DEC Private","","",""
+"DECSCA","","Select Character Attribute (selective erase)","`VT220`","Editing Functions","DEC Private","","",""
+"DECCRA","","Copy Rectangular Area","`VT420`","OLTP Features","Rectangular Area Operations","","",""
+"DECFRA","","Fill Rectangular Area","`VT420`","OLTP Features","Rectangular Area Operations","","",""
+"DECERA","","Erase Rectangular Area","`VT420`","OLTP Features","Rectangular Area Operations","","",""
+"DECSERA","","Selective Erase Rectangular Area","`VT420`","OLTP Features","Rectangular Area Operations","","",""
+"DECCARA","","Change Attribute in Rectangular Area","`VT420`","OLTP Features","Rectangular Area Operations","","",""
+"DECRARA","","Reverse Attribute in Rectangular Area","`VT420`","OLTP Features","Rectangular Area Operations","","",""
+"DECSACE","","Select Attribute Change Extent Mode","`VT420`","OLTP Features","Rectangular Area Operations","","",""
+"DECRQCRA","","Request Checksum of Rectangular Area","`VT420`","OLTP Features","Data Integrity","","",""
+"DSR-DECCKSR","","Device Status Report (Memory Checksum)","`VT420`","OLTP Features","Data Integrity","","",""
+"DECDMAC","","Define Macro","`VT420`","OLTP Features","Macros","","",""
+"DECINVM","","Invoke Macro","`VT420`","OLTP Features","Macros","","",""
+"DSR-MSR","","Device Status Report (Macro Space Report)","`VT420`","OLTP Features","Macros","","",""
+"DECSC","","Save Cursor","`VT100`","Saving and Restoring Terminal State","Cursor Save Buffer","","",""
+"DECRC","","Restore Cursor","`VT100`","Saving and Restoring Terminal State","Cursor Save Buffer","","",""
+"DECRQM","","Request Mode","`VT320`","Saving and Restoring Terminal State","Terminal State Interrogation","","",""
+"DECNKM","","Numeric Keypad Mode","`VT320`","Saving and Restoring Terminal State","Terminal State Interrogation","","",""
+"DECRQSS","","Request Selection or Setting","`VT320`","Saving and Restoring Terminal State","Terminal State Interrogation","","",""
+"DECRQPSR","","Request Presentation State Report","`VT320`","Saving and Restoring Terminal State","Terminal State Interrogation","","",""
+"DECRSPS","","Restore Presentation State","`VT320`","Saving and Restoring Terminal State","Terminal State Interrogation","","",""
+"DECRQTSR","","Request Terminal State Report","`VT320`","Saving and Restoring Terminal State","Terminal State Interrogation","","",""
+"DECRSTS","","Restore Terminal State","`VT320`","Saving and Restoring Terminal State","Terminal State Interrogation","","",""
+"DECARM","","Autorepeat Mode","`VT100`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECBKM","","Backarrow Key Mode","`VT420`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECCKM","","Cursor Keys Mode","`VT100`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECKBUM","","Keyboard Usage Mode","`VT320`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECKPAM","","Keypad Application Mode","`VT100`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECKPM","","Key Position Mode","`VT420`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECKPNM","","Keypad Numeric Mode","`VT100`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECNKM","","Numeric Keypad Mode","`VT320`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DSR-KBD","","Device Status Report (keyboard status)","`VT220`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"KAM","","Keyboard Action Mode","`VT220`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECLFC","","Local Functions Control","`VT420`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECLFKC","","Local Function Key Control","`VT420`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECSMKR","","Select Modifier Key Reporting","`VT420`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECHEBM","","Hebrew Keyboard Map mode","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECHCEM","","Hebrew Encoding Mode","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECNAKB","","NA/Greek Selection","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECESKM","","Secondary Keyboard Language Mode","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECSLCK","","Set Lock Key Style","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECKBD","","Keyboard Dialect Selection","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECNUMLK","","NumLock Mode","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECCAPSLK","","CapsLock Mode","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECKLHIM","","Keyboard LEDs Host Indicator Mode","`VT510`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECLL","","Load LEDs","`VT100`","Keyboard Processing Functions","Terminal State Interrogation","","",""
+"DECUDK","","User Defined Keys","`VT220`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DSR-UDK","","Device Status Report (UDK lock)","`VT220`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECPKA","","Program Key Action","`VT510`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECPFK","","Program Function Key","`VT510`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECPAK","","Program Alphanumeric Key","`VT510`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECCKD","","Copy Key Default","`VT510`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECRQPKFM","","Program Key Free Memory Inquiry","`VT510`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECRQKT","","Inquire a Key Type","`VT510`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECRQKD","","Inquire a Key Definition","`VT510`","Soft Key Mapping (UDK)","Terminal State Interrogation","","",""
+"DECDLD","","Downline Load","`VT220`","Soft Fonts (DRCS)","Terminal State Interrogation","","",""
+"DECPEX","","Print Extent Mode","`VT220`","Printing","Terminal State Interrogation","","",""
+"DECPFF","","Print Form Feed Mode","`VT220`","Printing","Terminal State Interrogation","","",""
+"DSR-PP","","Device Status Report (printer port)","`VT220`","Printing","Terminal State Interrogation","","",""
+"MC","","Media Copy","`VT220`","Printing","Terminal State Interrogation","","",""
+"DECSPRTT","","Select Printer Type","`VT510`","Printing","Terminal State Interrogation","","",""
+"DECSDPT","","Select Digital Printed Data Type","`VT510`","Printing","Terminal State Interrogation","","",""
+"DECSPPCS","","Select Proprinter Character Set","`VT510`","Printing","Terminal State Interrogation","","",""
+"BREAK","","BREAK","`VT100`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"XON","","XON","`VT100`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"XOFF","","XOFF","`VT100`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"ENQ","","Enquiry","`VT100`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"SRM","","Send Receive Mode","`VT220`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECXRLM","","Transmit Rate Limiting Mode","`VT420`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECMCM","","Modem Control Mode","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECAAM","","Auto Answerback Mode","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECLANS","","Load Answerback Message","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECCANSM","","Conceal Answerback Message Mode","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECNULM","","Ignore Null Mode","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECHPDXM","","Half Duplex Mode","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECSFC","","Select Flow Control","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECSDDT","","Select Disconnect Delay Time","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECSTRL","","Set Transmit Rate Limit","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECSCS","","Select Communication Speed","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECSCP","","Select Communication Port","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECSPP","","Set Port Parameter","`VT510`","Terminal Communication and Synchronization","Terminal State Interrogation","","",""
+"DECEFR","","Enable Filter Rectangle","`UWS`","Text Locator Extension","Terminal State Interrogation","","",""
+"DECELR","","Enable Locator Reports","`UWS`","Text Locator Extension","Terminal State Interrogation","","",""
+"DECLKD","","Locator Key Definition","`UWS`","Text Locator Extension","Terminal State Interrogation","","",""
+"DECLRP","","Locator Report","`UWS`","Text Locator Extension","Terminal State Interrogation","","",""
+"DECRQLP","","Request Locator Position","`UWS`","Text Locator Extension","Terminal State Interrogation","","",""
+"DECSLE","","Select Locator Events","`UWS`","Text Locator Extension","Terminal State Interrogation","","",""
+"DSR-LS","","Device Status Report (Locator Status)","`UWS`","Text Locator Extension","Terminal State Interrogation","","",""
+"DECES","","Enable Sessions","`VT340` `VT420`","Session Management Extension","Terminal State Interrogation","","",""
+"DECANM","","`ANSI`/`VT52` Mode","`VT100`","Documented Exceptions","Terminal State Interrogation","","",""
+"DECALN","","Screen Alignment","`VT100`","Documented Exceptions","Terminal State Interrogation","","",""
+"DECAWM","","Autowrap Mode","`VT100`","Documented Exceptions","Terminal State Interrogation","","",""
+"DECTST","","Invoke Confidence Test","`VT100`","Documented Exceptions","Terminal State Interrogation","","",""
+"CRM","","Control Representation Mode","`VT100`","Documented Exceptions","Terminal State Interrogation","","",""

doc/reference/windows-terminal-logo.ans

@@ -0,0 +1,15 @@
+                                                  
+       ▀                                  ▀       
+                                                  
+       ▀ ▀▀ ▀▀ ▀▀ ▀▀ ▀  ▀  ▀ ▀▀ ▀▀ ▀▀ ▀▀ ▀        
+       ▀ ▀▀▀▀▀▀▀ ▀▀ ▀▀ ▀▀ ▀▀ ▀▀▀▀ ▀▀ ▀▀ ▀▀        
+        ▀▀▀▀▀▀▀▀▀▀  ▀  ▀ ▀▀ ▀▀ ▀▀ ▀▀ ▀  ▀         
+        ▀ ▀▀▀▀▀▀▀▀▀▀▀ ▀▀ ▀ ▀▀ ▀▀ ▀▀ ▀▀ ▀▀ ▀       
+       ▀▀  ▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀ ▀▀ ▀▀ ▀  ▀ ▀▀ ▀▀       
+       ▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀ ▀▀ ▀▀ ▀  ▀  ▀        
+       ▀ ▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀  ▀ ▀▀ ▀▀ ▀▀ ▀▀        
+        ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀ ▀       
+       ▀▀▀▀▀▀▀▀▀▀▀▀  ▀▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀ ▀▀       
+       ▀   ▀▀▀▀▀▀▀ ▀ ▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀ ▀▀       
+       ▀ ▀ ▀▀▀▀▀ ▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀ ▀▀▀       
+                                                  

doc/specs/Proto extensions-spec.md

@@ -0,0 +1,385 @@
+---
+author: <Pankaj> <Bhojwani> <@PankajBhojwani>
+created on: <2020-9-9>
+last updated: <2020-10-15>
+---
+
+# Proto extensions
+
+## Abstract
+
+This spec outlines adding support for proto extensions. This would allow other apps/programs
+to add json snippets to our json files, and will be used when we generate settings for our various profiles.
+
+## Inspiration
+
+### Goal: Allow programs to have a say in the settings for their profiles
+
+Currently, Ubuntu/WSL/Powershell etc are unable to provide any specifications for how they want
+their profiles in Terminal to look - only we and the users can modify the profiles. We want to provide
+these installations with the functionality to have a say in this, allowing them to specify things like
+their icon, their font and so on. However, we want to maintain that the user has final say over all of
+these settings.
+
+## Solution Design
+
+Currently, when we load the settings we perform the following steps (this is a simplified description,
+for the full version see the [spec for cascading default + user settings](https://github.com/microsoft/terminal/blob/master/doc/specs/%23754%20-%20Cascading%20Default%20Settings.md)):
+
+1. Generate profiles from the defaults file
+2. Generate profiles from the dynamic profile generators
+3. Layer the user settings on top of all the profiles created in steps 1 and 2
+4. Validate the settings
+
+To allow for installations to add in their snippets of json, I propose the addition of a new step
+in between 2 and 3:
+
+1. Generate profiles from the defaults file
+2. Generate profiles from the dynamic profile generators
+3. **Incorporate the additional provided json stubs** - these stubs could be:
+   1. modifications to existing profiles
+   2. additions of full profiles
+   3. additions of colour schemes
+4. Layer the user settings on top of all the profiles created in steps 1 through 3 (this includes the user-defined default settings which they wish to apply to all profiles)
+5. Validate the settings
+
+### Specifications of the json stubs
+
+As written above, the json stubs could be modifications to existing profiles, additions to full profiles, or additions of colour schemes.
+
+To allow modifications/additions of several profiles in one file and to allow the addition of several colour schemes in one json file,
+these stubs should be put into lists in the json file: one list named ```profiles``` and the other list named ```schemes```. For example:
+
+```js
+{
+    "profiles": [ modifications and additions of profiles go here ],
+    "schemes": [ additions of colour schemes go here ]
+}
+```
+
+An example of a full json file with these fields filled out is shown at the end of this section.
+
+#### Modifications to existing profiles
+
+The main thing to note for modification of existing profiles is that this will only be used for modifying the
+default profiles (cmd/powershell) or the dynamically generated profiles.
+
+For modifications to existing profiles, the json stub would need to indicate which profile it wishes to modify. It will
+do this by providing the corresponding guid in the `"updates"` field of the json stub. The reason we use an `"updates"`
+field rather than a `"guid"` field (like the way the user settings are eventually layered onto profiles) is because we
+do not want to mistakenly create a new profile when the stub was meant to update a profile that did not exist.
+
+Note that currently, we generate a GUID for dynamic profiles using the "initial" name of the profile (i.e. before
+any user changes are applied). For example, the "initial" name of a WSL profile is the \<name\> argument to
+"wsl.exe -d \<name\>", and the "initial" name of a Powershell profile is something like "Powershell (ARM)" - depending
+on the version. Thus, the stub creator could simply use the same uuidv5 GUID generator we do on that name to obtain the
+GUID. Then, in the stub they provide the GUID can be used to identify which profile to modify.
+
+Naturally, we will have to provide documentation on how they could generate the desired GUID themselves. In that documentation,
+we will also provide examples showing how the current GUIDs are generated for clarity's sake.
+
+We need to inform developers that **we will not** prescribe any ordering to the way in which these modifications will be
+applied - thus, they should not rely on their stub being the first/last to modify a particular profile (in the event that
+there is more than one json stub modifying the same profile).
+
+Here is an example of a json file that modifies an existing profile (specifically the Azure cloud shell profile):
+
+```js
+{
+    "profiles": [
+        {
+            "updates": "{b453ae62-4e3d-5e58-b989-0a998ec441b8}",
+            "fontSize": 16,
+            "fontWeight": "thin"
+        }
+    ]
+}
+```
+
+**NOTE**: This will *not* change the way the profile looks in the user's settings file. The Azure cloud shell profile
+in their settings file (assuming they have made no changes) will still be as below.
+
+```js
+{
+    "guid": "{b453ae62-4e3d-5e58-b989-0a998ec441b8}",
+    "hidden": false,
+    "name": "Azure Cloud Shell",
+    "source": "Windows.Terminal.Azure"
+}
+```
+However, the user is free to make changes to it as usual and those changes will have the 'final say'.
+
+#### Full profile stubs
+
+Technically, full profile stubs do not need to contain anything (they could just be '\{\}'). However we should
+have some qualifying minimum criteria before we accept a stub as a full profile. I suggest that we only create
+new profile objects from stubs that contain at least the following
+
+* A name
+
+As in the case of the dynamic profile generator, if we create a profile that did not exist before (i.e. does not
+exist in the user settings), we need to add the profile to the user settings file and re-save that file.
+
+Furthermore, we will add a source field to profiles created this way (again, similar to what we do for dynamic profiles).
+The source field value is dependent on how we obtained this json file, and will be touched on in more detail [later in the spec](#the-source-field).
+
+Here is an example of a json file that contains a full profile:
+
+```js
+{
+    "profiles": [
+        {
+            "guid": "{a821ae62-9d4a-3e34-b989-0a998ec283e6}",
+            "name": "Cool Profile",
+            "commandline": "powershell.exe",
+            "antialiasingMode": "aliased",
+            "fontWeight": "bold",
+            "scrollbarState": "hidden"
+        }
+    ]
+}
+```
+
+When this profile gets added back to the user's settings file, it will look similar to the way we currently add
+new dynamic profiles to the user's settings file. Going along with the example above, the corresponding
+json stub in the user's settings file will be:
+
+```js
+{
+    "guid": "{a821ae62-9d4a-3e34-b989-0a998ec283e6}",
+    "name": "Cool Profile",
+    "hidden": "false",
+    "source": "local"
+}
+```
+Again, the user will be able to make changes to it as they do for all other profiles.
+
+#### Creation of colour schemes
+
+As with full profiles, we will have some qualifying criteria for what we accept as full colour schemes: color schemes
+must have _all_ the fields that define a colour scheme - see the
+[docs](https://docs.microsoft.com/en-us/windows/terminal/customize-settings/color-schemes)
+on creating new colour schemes for what this means.
+
+This may cause the issue of colour schemes being overridden if there are many creations of a colour scheme with the
+same name. Since for now all we have to uniquely identify colour schemes *is* the name, we will just let this be.
+
+Here is an example of a json stub that contains a colour scheme:
+
+```js
+{
+    "schemes": [
+        {
+            "name": "Postmodern Tango Light",
+
+            "cursorColor": "#FFFFFF",
+            "selectionBackground": "#FFFFFF",
+
+            "background": '#61D6D6',
+            "foreground": '#E74856',
+
+            "black" : "#0C0C0C",
+            "blue" : "#0037DA",
+            "cyan" : "#3A96DD",
+            "green" : "#13A10E",
+            "purple" : "#881798",
+            "red" : "#C50F1F",
+            "white" : "#CCCCCC",
+            "yellow" : "#C19C00",
+            "brightBlack" : "#767676",
+            "brightBlue" : "#3B78FF",
+            "brightCyan" : "#61D6D6",
+            "brightGreen" : "#16C60C",
+            "brightPurple" : "#B4009E",
+            "brightRed" : "#E74856",
+            "brightWhite" : "#F2F2F2",
+            "brightYellow" : "#F9F1A5"
+        }
+    ]
+}
+```
+
+This stub will *not* show up in the users settings file, similar to the way our default colour schemes do not show up.
+
+#### Example of a full json file
+This is an example of a json file that combines all the above examples. Thus, this json file modifies the Azure Cloud
+Shell profile, creates a new profile called 'Cool Profile' and creates a new colour scheme called 'Postmodern Tango Light'.
+
+```js
+{
+  "profiles": [
+    {
+      "updates": "{b453ae62-4e3d-5e58-b989-0a998ec441b8}",
+      "fontSize": 16,
+      "fontWeight": "thin"
+    },
+    {
+      "guid": "{a821ae62-9d4a-3e34-b989-0a998ec283e6}",
+      "name": "Cool Profile",
+      "commandline": "powershell.exe",
+      "antialiasingMode": "aliased",
+      "fontWeight": "bold",
+      "scrollbarState": "hidden"
+    }
+  ],
+  "schemes": [
+    {
+        "name": "Postmodern Tango Light",
+
+        "cursorColor": "#FFFFFF",
+        "selectionBackground": "#FFFFFF",
+
+        "background": '#61D6D6',
+        "foreground": '#E74856',
+
+        "black" : "#0C0C0C",
+        "blue" : "#0037DA",
+        "cyan" : "#3A96DD",
+        "green" : "#13A10E",
+        "purple" : "#881798",
+        "red" : "#C50F1F",
+        "white" : "#CCCCCC",
+        "yellow" : "#C19C00",
+        "brightBlack" : "#767676",
+        "brightBlue" : "#3B78FF",
+        "brightCyan" : "#61D6D6",
+        "brightGreen" : "#16C60C",
+        "brightPurple" : "#B4009E",
+        "brightRed" : "#E74856",
+        "brightWhite" : "#F2F2F2",
+        "brightYellow" : "#F9F1A5"
+    }
+  ]
+}
+```
+
+### Creation and location(s) of the json files
+
+In this section, we cover where an app that wants to use this proto-extension functionality should put the json
+files. Once we implement this feature, we will need to provide documentation on this for app developers.
+
+#### For apps installed through Microsoft store (or similar)
+
+For apps that are installed through something like the Microsoft Store, they will need to declare themselves to
+be an app extension or write a separate app extension. In the app extension, they will need to create a public
+folder, and create a subdirectory within that folder called `Fragments`. The json files should be inserted into the
+`Fragments` subdirectory. The specifics of how they can declare themselves as an app extension are provided in the
+[Microsoft Docs](https://docs.microsoft.com/en-us/windows/uwp/launch-resume/how-to-create-an-extension), and I will
+replicate the necessary section here.
+
+In the appxmanifest file of the package:
+
+```js
+<Package
+  ...
+  xmlns:uap3="http://schemas.microsoft.com/appx/manifest/uap/windows10/3"
+  IgnorableNamespaces="uap uap3 mp">
+  ...
+    <Applications>
+      <Application Id="App" ... >
+        ...
+        <Extensions>
+          ...
+          <uap3:Extension Category="windows.appExtension">
+            <uap3:AppExtension Name="com.microsoft.windows.terminal.settings"
+                               Id="<id>"
+                               PublicFolder="Public">
+            </uap3:AppExtension>
+          </uap3:Extension>
+        </Extensions>
+      </Application>
+    </Applications>
+    ...
+</Package>
+```
+
+Note that the name field **must** be `com.microsoft.windows.terminal.settings` for us to detect this extension. The `Id` field
+can be filled out as the app wishes. The `PublicFolder` field should have the name of the folder, relative to
+the package root, where the `json` files they wish to share with us are stored (this folder is typically named
+`Public` but can be renamed as long as it matches the relevant folder).
+
+During our profile generation, we will probe the OS for app extensions with the name `com.microsoft.windows.terminal.settings`
+and obtain the json files stored in the `Fragments` subdirectories of the public folders of those app extensions.
+
+#### For apps installed 'traditionally'
+
+For apps that are installed 'traditionally', there are 2 cases. The first is that this installation is for all
+the users of the system - in this case, the installer should add their json files to the global folder:
+
+```js
+C:\ProgramData\Microsoft\Windows Terminal\Fragments\{app-name}
+```
+
+Note: `C:\ProgramData` is a [known folder](https://docs.microsoft.com/en-us/previous-versions/windows/desktop/legacy/bb776911(v=vs.85))
+that apps should be able to access. If the folder `Windows Terminal` in `C:\ProgramData\Microsoft\Windows`
+does not already exist, the installer should create it. **Note:** the installer must create a subdirectory within
+the `Fragments` folder with their app name, we will use that name for the [`source` field](#the-source-field).
+
+In the second case, the installation is only for the current user. For this case, the installer should add the
+json files to the local folder:
+
+```js
+C:\Users\<user>\AppData\Local\Microsoft\Windows Terminal\Fragments\{app-name}
+```
+
+We will look through both folders mentioned above during profile generation.
+
+#### The source field
+
+Currently, we allow users an easy way to disable/enable profiles that are generated from certain sources. For
+example, a user can easily hide all dynamic profiles with the source `"Windows.Terminal.Wsl"` if they wish to.
+To retain this functionality, we will add source fields to profiles we create through proto-extensions.
+
+For full profiles that came from apps installed 'traditionally', we will use the name of the subdirectory where
+the json file was found to fill out the source field.
+
+For full profiles that came from app extensions, we will use the app package name to fill out the source field.
+
+
+
+## UI/UX Design
+
+This feature will allow other installations a level of control over how their profiles look in Terminal. For example,
+if Ubuntu gets a new icon or a new font they can have those changes be reflected in Terminal users' Ubuntu profiles.
+
+## Capabilities
+
+### Accessibility
+
+This change should not affect accessibility.
+
+### Security
+
+Opening a profile causes its commandline argument to be automatically run. Thus, if malicious modifications are made
+to existing profiles or new profiles with malicious commandline arguments are added, users could be tricked into running
+things they do not want to.
+
+### Reliability
+
+This should not affect reliability - most of what its doing is simply layering json which we already do.
+
+### Compatibility
+
+Again, there should not be any issues here - the user settings can still be layered after this layering for the user
+to have the final say.
+
+### Performance, Power, and Efficiency
+
+Looking through the additional json files could negatively impact startup time.
+
+## Potential Issues
+
+* An installer dumps a _lot_ of json files into the folder which we need to look through.
+* When a `.json` files is deleted, any new profiles that were generated from it remain in the user's settings file (though they no longer appear in the tab dropdown).
+
+## Future considerations
+
+We need to consider how an app extension provides the path to an image (for the icon source or background image of a profile for example)
+
+This will likely be a stepping stone for the theme marketplace.
+
+This will also likely be a stepping stone to allowing users to specify other files to import settings from.
+
+## Resources
+
+N/A

doc/specs/settings-spec-template.md

@@ -0,0 +1,76 @@
+---
+author: <first-name> <last-name> <github-id>/<email>
+created on: <yyyy-mm-dd>
+last updated: <yyyy-mm-dd>
+issue id: <github issue id>
+---
+
+[comment]: # Use this template for proposing a new setting, or new values for an existing setting
+
+# Spec Title
+
+## Abstract
+
+[comment]: # Outline what this spec describes.
+
+## Background
+
+### Inspiration
+
+[comment]: # Are there existing precedents for this type of configuration? These may be in the Terminal, or in other applications
+
+### User Stories
+
+[comment]: # List off the use cases where two users might want a feature to have different behavior based on user preference. Include links to issues that might be relevant.
+
+### Future Considerations
+
+[comment]: # Are there other future features planned that might affect the current design of this setting? The team can help with this section during the review.
+
+## Solution Design
+
+[comment]: # Add notes that might be relevant to the proposed solutions.
+
+[comment]: # Also, outline various different proposed designs for this setting. These won't all be winners, but may help during the decision making process. For each proposed design:
+
+### Proposal 1: <name of proposal>
+
+[comment]: # Describe the values for the properties, how it'll be exposed in both JSON and the Settings UI, and list pros and cons for this design. If there are technical details for this proposal, include them here.
+
+* **Pros**:
+* **Cons**:
+
+## Conclusion
+
+[comment]: # Of the above proposals, which should we decide on, and why?
+
+
+## UI/UX Design
+
+[comment]: # How will different values of this setting affect the end user?
+
+## Potential Issues
+
+<table>
+
+<tr>
+<td><strong>Compatibility</strong></td>
+<td>
+
+[comment]: # Will the proposed change break existing code/behaviors? If so, how, and is the breaking change "worth it"?
+
+</td>
+</tr>
+</table>
+
+[comment]: # If there are any other potential issues, make sure to include them here.
+
+
+## Resources
+
+[comment]: # Be sure to add links to references, resources, footnotes, etc.
+
+
+### Footnotes
+
+<a name="footnote-1"><a>[1]:

doc/terminal-v2-roadmap.md

@@ -25,9 +25,9 @@ Below is the schedule for when milestones will be included in release builds of
 | 2020-07-31 | [1.2] in Windows Terminal Preview<br>[1.1] in Windows Terminal | [Windows Terminal Preview 1.2 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-2-release/) |
 | 2020-08-31 | [1.3] in Windows Terminal Preview<br>[1.2] in Windows Terminal | [Windows Terminal Preview 1.3 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-3-release/) |
 | 2020-09-30 | [1.4] in Windows Terminal Preview<br>[1.3] in Windows Terminal | [Windows Terminal Preview 1.4 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-4-release/) |
-| 2020-11-30 | [1.5] in Windows Terminal Preview<br>[1.4] in Windows Terminal | |
-| 2020-12-31 | 1.6 in Windows Terminal Preview<br>[1.5] in Windows Terminal | |
-| 2021-01-31 | 1.7 in Windows Terminal Preview<br>1.6 in Windows Terminal | |
+| 2020-11-30 | [1.5] in Windows Terminal Preview<br>[1.4] in Windows Terminal | [Windows Terminal Preview 1.5 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-5-release/) |
+| 2020-12-31 | [1.6] in Windows Terminal Preview<br>[1.5] in Windows Terminal | |
+| 2021-01-31 | 1.7 in Windows Terminal Preview<br>[1.6] in Windows Terminal | |
 | 2021-02-28 | 1.8 in Windows Terminal Preview<br>1.8 in Windows Terminal | |
 | 2021-03-31 | 1.9 in Windows Terminal Preview<br>1.9 in Windows Terminal | |
 | 2021-04-30 | 2.0 RC in Windows Terminal Preview<br>2.0 RC in Windows Terminal | |
@@ -82,6 +82,7 @@ Feature Notes:
 [1.3]: https://github.com/microsoft/terminal/milestone/26
 [1.4]: https://github.com/microsoft/terminal/milestone/28
 [1.5]: https://github.com/microsoft/terminal/milestone/30
+[1.6]: https://github.com/microsoft/terminal/milestone/31
 [2.0]: https://github.com/microsoft/terminal/milestone/22
 [#1564]: https://github.com/microsoft/terminal/issues/1564
 [#6720]: https://github.com/microsoft/terminal/pull/6720