## Summary of the Pull Request
- Adjusts scaling practices in `DxEngine` (and related scaling practices in `TerminalControl`) for pixel-perfect row baselines and spacing at High DPI such that differential row-by-row rendering can be applied at High DPI.
## References
- #5185
## PR Checklist
* [x] Closes#5320, closes#3515, closes#1064
* [x] I work here.
* [x] Manually tested.
* [x] No doc.
* [x] Am core contributor. Also discussed with some of them already via Teams.
## Detailed Description of the Pull Request / Additional comments
**WAS:**
- We were using implicit DPI scaling on the `ID2D1RenderTarget` and running all of our processing in DIPs (Device-Independent Pixels). That's all well and good for getting things bootstrapped quickly, but it leaves the actual scaling of the draw commands up to the discretion of the rendering target.
- When we don't get to explicitly choose exactly how many pixels tall/wide and our X/Y placement perfectly, the nature of floating point multiplication and division required to do the presentation can cause us to drift off slightly out of our control depending on what the final display resolution actually is.
- Differential drawing cannot work unless we can know the exact integer pixels that need to be copied/moved/preserved/replaced between frames to give to the `IDXGISwapChain1::Present1` method. If things spill into fractional pixels or the sizes of rows/columns vary as they are rounded up and down implicitly, then we cannot do the differential rendering.
**NOW:**
- When deciding on a font, the `DxEngine` will take the scale factor into account and adjust the proposed height of the requested font. Then the remainder of the existing code that adjusts the baseline and integer-ifies each character cell will run naturally from there. That code already works correctly to align the height at normal DPI and scale out the font heights and advances to take an exact integer of pixels.
- `TermControl` has to use the scale now, in some places, and stop scaling in other places. This has to do with how the target's nature used to be implicit and is now explicit. For instance, determining where the cursor click hits must be scaled now. And determining the pixel size of the display canvas must no longer be scaled.
- `DxEngine` will no longer attempt to scale the invalid regions per my attempts in #5185 because the cell size is scaled. So it should work the same as at 96 DPI.
- The block is removed from the `DxEngine` that was causing a full invalidate on every frame at High DPI.
- A TODO was removed from `TermControl` that was invalidating everything when the DPI changed because the underlying renderer will already do that.
## Validation Steps Performed
* [x] Check at 150% DPI. Print text, scroll text down and up, do selection.
* [x] Check at 100% DPI. Print text, scroll text down and up, do selection.
* [x] Span two different DPI monitors and drag between them.
* [x] Giant pile of tests in https://github.com/microsoft/terminal/pull/5345#issuecomment-614127648
Co-authored-by: Dustin Howett <duhowett@microsoft.com>
Co-authored-by: Mike Griese <migrie@microsoft.com>
## Summary of the Pull Request
This is a quick-and-easy solution to #5309. If the ITextRangeProvider API allows us to take in two UiaTextRanges, we need to verify that they are both valid.
With this PR, we make sure they both fit in the current TextBuffer. If not, we return `E_FAIL`. Though this doesn't prove that both UiaTextRanges are from the same TextBuffer, at the very least we don't crash and in cases where we can't make a valid comparison, we return an HRESULT failure.
## References
#5406 - This should be the proper solution to this problem. Each UiaTextRange needs to be aware of which TextBuffer it came from.
## PR Checklist
* [X] Closes#5309
## Validation Steps Performed
1. generate enough output to cause the terminal to scroll
2. execute `nano` to make us go into the alternate buffer
This previously crashed, now NVDA seems to detect that there was an error and keeps moving along.
The scroll locking rework that landed with the DxRenderer's partial
invalidation change introduced a deadlock. UIA locks the buffer for
reading before asking it to scroll (which now requires a write lock.)
Scrolling is probably _okay_ to have a little bit of torn state that
might arise from us unlocking the read lock early before triggering the
write lock down the line.
While investigating this, I also noticed that our bounding rects stopped
being viewport-relative (and were instead buffer-relative.) That
regressed with the switch to `GetTextRects` in #4991
## PR Checklist
* [ ] Closes (issues noticed in investigating the DPI changes)
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] Core contributor badge
## Validation Steps Performed
Manual pass with inspect.exe
We received a request from our localization team to switch from
printf-style format strings (%s, %u) to format strings with positional
argument support. I've been hoping for a long time to take a dependency
on C++20's std::format, but we're just not somewhere we can do that.
Enter fmt. fmt is _exactly_ the library we need.
Minor comparison:
std::wstring_view world = /* ... */;
auto str{ wil::str_printf<std::wstring>(L"hello %.*s",
gsl::narrow_cast<size_t>(world.size()),
world.data()) };
---
auto str{ fmt::format(L"hello {0}", world) };
If you really want to use the print specifiers:
auto str{ fmt::printf(L"hello %s", world) };
It's got optional compile-time checking for format strings and is
MIT-licensed. Eventually, we should be able to replace fmt:: with std::
and end up pretty much where we left off.
What more could you ask for?
This is a subset of #3578 which I think is harmless and the first step towards making things right.
References #3546#3578
## Detailed Description of the Pull Request / Additional comments
For more robust Unicode support, `CodepointWidthDetector` should provide concrete width information rather than a simple boolean of `IsWide`. Currently only `IsWide` is widely used and optimized using quick lookup table and fallback cache. This PR moves those optimization into `GetWidth`.
## Validation Steps Performed
API remains unchanged. Things are not broken.
## Summary of the Pull Request
In preparation for getting more accessibility-related issues, I added an ID to the `ScreenInfoUiaProvider` (SIUP) and abstracted the one from `UiaTextRange`. Using this, I noticed that we are creating SIUPs when a new tab/pane is created. This is _good_. This means that we need to somehow notify a UIA Client that out structure has changed, and we need to use the new SIUP because the old one has been removed.
I'll be investigating that more after this PR lands.
This commit introduces a github action to check our spelling and fixes
the following misspelled words so that we come up green.
It also renames TfEditSes to TfEditSession, because Ses is not a word.
currently, excerpt, fallthrough, identified, occurred, propagate,
provided, rendered, resetting, separate, succeeded, successfully,
terminal, transferred, adheres, breaks, combining, preceded,
architecture, populated, previous, setter, visible, window, within,
appxmanifest, hyphen, control, offset, powerpoint, suppress, parsing,
prioritized, aforementioned, check in, build, filling, indices, layout,
mapping, trying, scroll, terabyte, vetoes, viewport, whose
## Summary of the Pull Request
- Added better wide glyph support for UIA. We used to move one _cell_ at a time, so wide glyphs would be read twice.
- Converted a few things to use til::point since I'm already here.
- fixed telemetry for UIA
## PR Checklist
* [x] Closes#1354
## Detailed Description of the Pull Request / Additional comments
The text buffer has a concept of word boundaries, so it makes sense to have a concept of glyph boundaries too.
_start and _end in UiaTextRange are now til::point
## Validation Steps Performed
Verified using Narrator
For some functions, the overriding implementation is set to default, but
the deletion is not explicitly set at all. For those functions, I
changed default to delete
## Summary of the Pull Request
Block selections were always read and displayed as line selections in UIA. This fixes that.
## PR Checklist
* [x] Closes#4509
## Detailed Description of the Pull Request / Additional comments
1. Expose `IsBlockSelection()` via IUiaData
2. Update the constructor to be able to take in a block selection parameter
3. Make ScreenInfoUiaProviders pass step 1 output into step 2 constructor
4. Update all instances of `UiaTextRange::GetTextRects()` to include this new flag
## Validation Steps Performed
Manually tested.
Additional tests would be redundant as GetTextRects() is tested in the text buffer.
## Summary of the Pull Request
This notifies automation clients (i.e.: NVDA, narrator, etc...) of new output being rendered to the screen.
## References
Close#2447 - Signaling for new output and cursor
Close#3791 - fixed by signaling cursor changes
## Detailed Description of the Pull Request / Additional comments
- Added tracing for UiaRenderer. This makes it easier to debug issues with notifying an automation client.
- Fire TextChanged automation events when new content is output to the screen.
## Validation Steps Performed
Verified with NVDA [1]
## Narrator
Narrator works _better_, but is unable to detect new output consistently. There is no harm for narrator when this change goes in.
[1] https://github.com/microsoft/terminal/issues/2447#issuecomment-595879890
In IInputEvent, there are two for loops. One is a range based loop operating on "records", and the other is a classic for-loop doing the same. For consistency, the for-loop was changed into the more modern variation via a compiler refactoring, which has the exact same behavior as the other for-loop in the main function.
Yes, of course this was tested manually and with the unit tests.
# Validation Steps
Unit testing passed. In addition, for the manual validation tests, I compared the output for sample values between the two loops ensuring the same results.
Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 5b3acd8b5bac38da02fc86a29c81dfd252e79d1f
Related work items: MSFT:25505535
[Git2Git] Merged PR 4314209: Fix some TVS warnings in Console UIA
1. We were doing `FAILED(X || FAILED(Y))` instead of `FAILED(X) || FAILED(Y)`.
Fixes MSFT:24904151. Fixes MSFT:24904224.
2. You cannot SAL-annotate a `gsl::not_null`.
Fixes MSFT:24904221
Related work items: #24904151, #24904221, #24904224 Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 46167d4415c888d4d6a52ea7d3e3cc57a0f5a78d
Related work items: #24904151, #24904221, #24904224
## Summary of the Pull Request
`GetTextForClipboard` already exists in the TextBuffer. It makes sense to use that for UIA as well. This changes the behavior or `GetText()` such that it does not remove leading/trailing whitespace anymore. That is more of an expected behavior.
## References
This also contributes to...
- #4509: UIA Box Selection
- #2447: UIA Signaling for Selection
- #1354: UIA support for Wide Glyphs
Now that the expansion occurs at before render-time, the selection anchors are an accurate representation of what is selected. We just need to move GetText to the TextBuffer. Then we can have those three issues just rely on code from the text buffer. This also means ConHost gets some of this stuff for free 😀
## Detailed Description of the Pull Request / Additional comments
- `TextBuffer::GetTextForClipboard()` --> `GetText()`
- `TextBuffer::GetText()` no longer requires GetForegroundColor/GetBackgroundColor. If either of these are not defined, we return a `TextAndColor` with only the `text` field populated.
- renamed a few parameters for copying text to the clipboard for clarity
- Updated `UiaTextRange::GetText()` to use `TextBuffer::GetText()`
## Validation Steps Performed
Manual tests for UIA using accessibility insights and Windows Terminal's copy action (w/ and w/out shift)
Added tests as well.
## Summary of the Pull Request
1) Improves the performance of word-recognition operations such as word
navigation in UIA and selection.
2) Fixes a bug where attempting to find the next word in UIA, when none
exists, would hang
3) TraceLogging code only runs when somebody is listening
## Detailed Description of the Pull Request / Additional comments
- The concept of a delimiter class got moved to the CharRow.
- The buffer iterator used to save a lot more information than we needed
- I missed updating a tracing function after making GetSelection return
one text range. That is fixed now.
## Validation Steps Performed
Performed Word Navigation under Narrator and NVDA.
NOTE: The release build should be used when testing to optimize
performance
Closes#4703
- When performing chunk selection, the expansion now occurs at the time
of the selection, not the rendering of the selection
- `GetSelectionRects()` was moved to the `TextBuffer` and is now shared
between ConHost and Windows Terminal
- Some of the selection variables were renamed for clarity
- Selection COORDs are now in the Text Buffer coordinate space
- Fixes an issue with Shift+Click after performing a Multi-Click
Selection
## References
This also contributes to...
- #4509: UIA Box Selection
- #2447: UIA Signaling for Selection
- #1354: UIA support for Wide Glyphs
Now that the expansion occurs at before render-time, the selection
anchors are an accurate representation of what is selected. We just need
to move `GetText` to the `TextBuffer`. Then we can have those three
issues just rely on code from the text buffer. This also means ConHost
gets some of this stuff for free 😀
### TextBuffer
- `GetTextRects` is the abstracted form of `GetSelectionRects`
- `_ExpandTextRow` is still needed to handle wide glyphs properly
### Terminal
- Rename...
- `_boxSelection` --> `_blockSelection` for consistency with ConHost
- `_selectionAnchor` --> `_selectionStart` for consistency with UIA
- `_endSelectionPosition` --> `_selectionEnd` for consistency with
UIA
- Selection anchors are in Text Buffer coordinates now
- Really rely on `SetSelectionEnd` to accomplish appropriate chunk
selection and shift+click actions
## Validation Steps Performed
- Shift+Click
- Multi-Click --> Shift+Click
- Chunk Selection at...
- top of buffer
- bottom of buffer
- random region in scrollback
Closes#4465Closes#4547
This PR hooks up the existing UIA implementation to the WPF control. Some existing code that was specific to the UWP terminal control could be shared so that has been refactored to a common location as well.
## Validation Steps Performed
WPF control was brought up in UISpy and the UIA tree was verified. NVDA was then used to check that screen readers were operating properly.
## Summary of the Pull Request
Debugging our custom UIA providers has been a painful experience because outputting content to VS may result in UIA Clients getting impatient and giving up on extracting data.
Adding tracing allows us to debug these providers without getting in the way of reproducing a bug. This will help immensely with developing accessibility features on Windows Terminal and Console.
This pull request additionally contains payload from #4526:
* Make GetVisibleRanges() return one range (and add tracing for it).
`ScreenInfoUiaProvider::GetVisibleRanges()` used to return one range per line of visible text. The documentation for this function says that we should return one per contiguous span of text. Since all of the text in the TermControl will always be contiguous (at least by our standards), we should only ever be returning one range.
## PR Checklist
* [x] Closes#1914. Closes#4507.
* [x] CLA signed
## Detailed Description of the Pull Request / Additional comments
`UiaTracing` is a singleton class that is in charge of registration for trace logging. `TextRange` is used to trace `UiaTextRange`, whereas `TextProvider` is used to trace `ScreenInfoUiaProviderBase`.
`_getValue()` is overloaded to transform complex objects and enums into a string for logging.
`_getTextValue()` had to be added to be able to trace the text a UiaTextRange included. This makes following UiaTextRanges much simpler.
## Validation Steps Performed
Performed a few operations when under NVDA/Narrator and manually checked the results.
## Summary of the Pull Request
We used to return multiple text ranges to represent one selection. We only support one selection at a time, so we should only return one range.
Additionally, I moved all TriggerSelection() calls to the renderer from Terminal to TermControl for consistency. This ensures we only call it _once_ when we make a change to our selection state.
## References
#2447 - helps polish Signaling for Selection
#4465 - This is more apparent as the problem holding back Signaling for Selection
## PR Checklist
* [x] Closes#4452
Tested using Accessibility Insights.
The UIA Provider now scrolls the viewport when necessary. This just fills in the missing virtual function in Terminal to have the same behavior as what it does in ConHost.
* [X] Closes#2361
* [X] CLA signed.
`ChangeViewport` is now a virtual function at the `ScreenInfoUiaProvider` layer to have access to the TermControl.
In ConHost, we pass this call up to the WindowUiaProvider layer. In Terminal, we don't need to do that because the concept of updating the viewport is handled at the TermControl layer. So we just call that function and _voila_!
## Summary of the Pull Request
In UIA Providers, update the concept of the size of the text buffer to just go down to the virtual bottom. This significantly increases performance to the point that it can even be used in the Debug build.
## PR Checklist
* [x] Closes#4485
* [x] CLA signed.
## Detailed Description of the Pull Request / Additional comments
We already actually have this concept exposed to us via the IUiaData. So we're just leveraging that and putting it in a helper function `_getBufferSize()`.
## Validation Steps Performed
Tested word nav on Narrator (previously hung). Now it works on the Debug build. Previously, using the release build was necessary to be able to test this feature.
## Summary of the Pull Request
Despite being specified as `noexcept`, `FillConsoleOutputCharacterA` emits an exception when a call to `ConvetToW` is made with an argument character which can't be converted. This PR fixes this throw, by wrapping `ConvertToW` in a try-catch_return.
## PR Checklist
* [x] Closes#4258
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed: thanks @miniksa
## Detailed Description of the Pull Request / Additional comments
Following the semantics of other `FillConsoleOutputCharacter*` the output param `cellsModified` is set to `0`. The try-catch_return is also what other functions of this family perform in case of errors.
## Validation Steps Performed
Original repro no longer crashes.
Generated by https://github.com/jsoref/spelling `f`; to maintain your repo, please consider `fchurn`
I generally try to ignore upstream bits. I've accidentally included some items from the `deps/` directory. I expect someone will give me a list of items to drop, I'm happy to drop whole files/directories, or to split the PR into multiple items (E.g. comments/locals/public).
Closes#4294
GetBoundingRect() has inclusive endpoints. I previously assumed end was exclusive so I drew the bounding rect wrong.
This also means that we should allow start and end to be the same. Which means that FailFastIf would get hit...
Moved `FindText` to `UiaTextRangeBase`. Now that Search is a shared component (thanks #3279), I can just reuse it basically as-is.
#3279 - Make Search a shared component
#4018 - UiaTextRange Refactor
I removed it from the two different kinds of UiaTextRange and put it in the base class.
I needed a very minor change to ensure we convert from an inclusive end (from Search) to an exclusive end (in UTR).
Worked with `FindText` was globally messed with in windows.h. So we had to do a few weird things there (thanks Michael).
No need for additional tests because it _literally_ just sets up a Searcher and calls it.
## Summary of the Pull Request
This pull request is intended to achieve the following goals...
1) reduce duplicate code
2) remove static functions
3) improve readability
4) improve reliability
5) improve code-coverage for testing
6) establish functioning text buffer navigation in Narrator and NVDA
This also required a change to the wrapper class `XamlUiaTextRange` that has been causing issues with Narrator and NVDA.
See below for additional context.
## References
#3976 - I believe this might have been a result of improperly handling degenerate ranges. Fixed here.
#3895 - reduced the duplicate code. No need to separate into different files
#2160 - same as #3976 above
#1993 - I think just about everything is no longer static
## PR Checklist
* [x] Closes#3895, Closes#1993, Closes#3976, Closes#2160
* [x] CLA signed
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
### UiaTextRange
- converted endpoints into the COORD system in the TextBuffer coordinate space
- `start` is inclusive, `end` is exclusive. A degenerate range is when start == end.
- all functions are no longer static
- `MoveByUnit()` functions now rely on `MoveEndpointByUnit()` functions
- removed unnecessary typedefs like `Endpoint`, `ScreenInfoRow`, etc..
- relied more heavily on existing functionality from `TextBuffer` and `Viewport`
### XamlUiaTextRange
- `GetAttributeValue()` must return a special HRESULT that signifies that the requested attribute is not supported. This was the cause of a number of inconsistencies between Narrator and NVDA.
- `FindText()` should return `nullptr` if nothing was found. #4373 properly fixes this functionality now that Search is a shared module
### TextBuffer
- Word navigation functionality is entirely in `TextBuffer` for proper abstraction
- a total of 6 functions are now dedicated to word navigation to get a good understanding of the differences between a "word" in Accessibility and a "word" in selection
As an example, consider a buffer with this text in it:
" word other "
In selection, a "word" is defined as the range between two delimiters, so the words in the example include [" ", "word", " ", "other", " "].
In accessibility , a "word" includes the delimiters after a range of readable characters, so the words in the example include ["word ", "other "].
Additionally, accessibility word navigation must be able to detect if it is on the first or last word. This resulted in a slight variant of word navigation functions that return a boolean instead of a COORD.
Ideally, these functions can be consolidated, but that is too risky for a PR of this size as it can have an effect on selection.
### Viewport
- the concept of `EndExclusive` is added. This is used by UiaTextRange's `end` anchor as it is exclusive. To signify that the last character in the buffer is included in this buffer, `end` must be one past the end of the buffer. This is `EndExclusive`
- Since many functions check if the given `COORD` is in bounds, a flag must be set to allow `EndExclusive` as a valid `COORD` that is in bounds.
### Testing
- word navigation testing relies more heavily on TextBuffer tests
- additional testing was created for non-movement focused functions of UiaTextRange
- The results have been compared to Microsoft Word and some have been verified by UiAutomation/Narrator contacts as expected results.
## Validation Steps Performed
Tests pass
Narrator works
NVDA works
## Summary of the Pull Request
Adds support for commandline arguments to the Windows Terminal, in accordance with the spec in #3495
## References
* Original issue: #607
* Original spec: #3495
## PR Checklist
* [x] Closes#607
* [x] I work here
* [x] Tests added/passed
* [ ] We should probably add some docs on these commands
* [x] The spec (#3495) needs to be merged first!
## Detailed Description of the Pull Request / Additional comments
🛑 **STOP** 🛑 - have you read #3495 yet? If you haven't, go do that now.
This PR adds support for three initial sub-commands to the `wt.exe` application:
* `new-tab`: Used to create a new tab.
* `split-pane`: Used to create a new split.
* `focus-tab`: Moves focus to another tab.
These commands are largely POC to prove that the commandlines work. They're not totally finished, but they work well enough. Follow up work items will be filed to track adding support for additional parameters and subcommands
Important scenarios added:
* `wt -d .`: Open a new wt instance in the current working directory #878
* `wt -p <profile name>`: Create a wt instance running the given profile, to unblock #576, #1357, #2339
* `wt ; new-tab ; split-pane -V`: Launch the terminal with multiple tabs, splits, to unblock #756
## Validation Steps Performed
* Ran tests
* Played with it a bunch
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Let's give it a test drive.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4162
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Build and run it.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- Enables auditing of Virtual Terminal libraries (input, adapter, parser)
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Rolls audit out to more things
* [x] I work here
* [x] Tests should still pass
* [x] Am core contributor
* [x] Closes#3957
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
This is turning on the auditing of these projects (as enabled by the heavier lifting in the other refactor) and then cleaning up the remaining warnings.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
- [x] Built it
- [x] Ran the tests
This pull request also includes build break fixes for things that do not build in the OSS repo
and disables the retro terminal effect in conhost.
Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp f10445678e59197c1ae2ee29d8f009c9607c4e5d
Related work items: #24387718
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
This is the PR for feature Search: #605
This PR includes the newly introduced SearchBoxControl in TermControl dir, which is the search bar for the search experience. And the codes that enable Search in Windows Terminal.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
The PR that migrates the Conhost search module: https://github.com/microsoft/terminal/pull/3279
Spec (still actively updating): https://github.com/microsoft/terminal/pull/3299
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#605
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
These functionalities are included in the search experience.
1. Search in Terminal text buffer.
2. Automatic wrap-around.
3. Search up or down switch by clicking different buttons.
4. Search case sensitively/insensitively by clicking a button. S. Move the search box to the top/bottom by clicking a button.
6. Close by clicking 'X'.
7. Open search by ctrl + F.
When the searchbox is open, the user could still interact with the terminal by clicking the terminal input area.
While I already have the search functionalities, currently there are still some known to-do works and I will keep updating my PR:
1. Optimize the search box UI, this includes:
1) Theme adaptation. The search box background and font color
should change according to the theme,
2) Add background. Currently the elements in search box are all
transparent. However, we need a background.
3) Move button should be highlighted once clicked.
2. Accessibility: search process should be able to performed without mouse. Once the search box is focused, the user should be able to navigate between all interactive elements on the searchbox using keyboard.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
To test:
1. checkout this branch.
2. Build the project.
3. Start Windows Terminal and press Ctrl+F
4. The search box should appear on the top right corner.
Enables support for word navigation when using an automation client (i.e.: Narrator, etc...). Specifically, adds this functionality to the UiaTextRange class. The only delimiter used is whitespace because that's how words are separated in English.
# General "Word Movement" Expectations
The resulting text range should include any word break characters that are present at the end of the word, but before the start of the next word. (Source)
If you already are on a word, getting the "next word" means you skip the word you are on, and highlight the upcoming word appropriately. (similar idea when moving backwards)
# Word Expansion
Since word selection is supposed to detect word delimiters already, I figured I'd reuse that code. I moved it from TerminalCore to the TextBuffer.
Then I built on top of it by adding an optional additional parameter that decides if you want to include...
- the delimiter run when moving forward
- the character run when moving backwards
It defaults to false so that we don't have to care when using it in selection. But we change it to true when using it in our UiaTextRange
# UiaTextRange
The code is based on character movement. This allows us to actually work with boundary conditions.
The main thing to remember here is that each text range is recorded as a MoveState. The text range is most easily defined when you think about the start Endpoint and the end Endpoint. An Endpoint is just a linear 1-dimensional indexing of the text buffer. Examples:
- Endpoint 0 --> (0,0)
- Endpoint 79 --> (79,0) (when the buffer width is 80)
- Endpoint 80 -->(0,1) (when the buffer width is 80)
- When moving forward, the strategy is to focus on moving the end Endpoint. That way, we properly get the indexing for the "next" word (this also fixes a wrapping issue). Then, we update the start Endpoint. (This is reversed for moving backwards).
- When moving a specific Endpoint, we just have a few extra if statements to properly adjust for moving start vs end.
# Hooking it up
All we really had to do is add an enum. This part was super easy :)
I originally wanted the delimiters to be able to be defined. I'm not so sure about that anymore. Either way, I hardcoded our delimiter into a variable so if we ever want to expand on it or make that customizable, we just modify that variable.
# Defining your own word delimiters
- Import a word delimiter into the constructor of the ScreenInfoUiaProvider (SIUP)
- This defines a word delimiter for all the UiaTextRanges (UTR) created by in this context
- import a word delimiter into the UTR directly
- this provides more control over what a "word" is
- this can be useful if you have an idea of what text a particular UTR will encounter and you want to customize the word navigation for it (i.e consider adding / or \\ for file paths)
The default param of " " is scattered throughout because this is the word delimiter used in the English language.
This PR makes use of the UiaRenderer by attaching it to the TerminalControl and setting up selectionChanged events for accessibility.
Part 1: attaching the UiaRenderer
The uiaRenderer is treated very similarly to the dxRenderer. We have a unique_ptr ref to it in the TermControl. This gets populated when the TermControlAutomationPeer is created (thus enabling accessibility).
To prevent every TermControl from sending signals simultaneously, we specifically only enable whichever one is in an active pane.
The UiaRenderer needs to send encoded events to the automation provider (in this case, TermControlAutomationPeer). We needed our own automation events so that we can reuse this model for ConHost. This is the purpose of IUiaEventDispatcher.
We need a dispatcher for the UiaRenderer. Otherwise, we would do a lot of work to find out when to fire an event, but we wouldn't have a way of doing that.
Part 2: hooking up selection events
This provides a little bit of polish to hooking it up before. Primarily to actually make it work. This includes returning S_FALSE instead of E_NOTIMPL.
The main thing here really is just how to detect if a selection has changed. This also shows how clean adding more events will be in the future!
* Make search a shared component for conhost and terminal
* Remove inclusion of deprecated interface file
* Code review changes, remove text buffer modification in Terminal
* remove unreferenced objects to fix build errors
* Fix test failure, guarantee uiaData object is correctly initialized in Search
* minor comment typo fix and format fix
* minor PR comments change
* ColorSeclection directly throw and return
* remove coordAnchor initialization
* minor method signature change
This commit deletes ConhostConnection and replaces it with
ConptyConnection. The ConptyConnection uses CreatePseudoConsole and
depends on winconpty to override the one from kernel32.
* winconpty must be packageable, so I've added GetPackagingOutputs.
* To validate this, I added conpty.dll to the MSIX regression script.
* I moved the code from conpty-universal that deals with environment
strings into the types library.
This puts us in a way better place to implement #2563, as we can now
separately detect a failure to launch a pseudoconsole, a failure to
CreateProcess, and an unexpected termination of the launched process.
Fixes#1131.
This commit cleans up and deduplicates all of the common build
preamble/postamble across exe, dll, lib and c++/winrt projects.
The following specific changes have been made:
* All projects now define their ConfigurationType
* All projects now set all their properties *before* including a common
build file (or any other build files)
* cppwinrt.pre and cppwinrt.post now delegate most of their
configuration to common.pre and common.post
* (becuase of the above,) all build options are conserved between
console and c++/winrt components, including specific warnings and
preprocessor definitions.
* More properties that are configurable per-project are now
conditioned so the common props don't override them.
* The exe, dll, exe.or.dll, and lib postincludes have been merged into
pre or post and switched based on condition as required
* Shared items (-shared, -common) are now explicitly vcxitems instead of
vcxproj files.
* The link line is now manipulated after Microsoft.Cpp sets it, so the
libraries we specify "win". All console things link first against
onecore_apiset.lib.
* Fix all compilation errors caused by build unification
* Move CascadiaPackage's resources into a separate item file
Fixes#922.
We take the standard window frame except that we remove the top part
(see `NonClientIslandWindow::_OnNcCalcSize`), then we put little 1 pixel
wide top border back in the client area using
`DwmExtendFrameIntoClientArea` and then we put the XAML island and the
drag bar on top.
Most of this PR is comments to explain how the code works and also
removing complex code that was needed to handle the weird cases when the
borders were custom.
I've also refactored a little bit the `NonClientIslandWindow` class.
* Fix DwmExtendFrameIntoClientArea values
* Fix WM_NCHITTEST handling
* Position the XAML island window correctly
* Fix weird colors in drag bar and hide old title bar buttons
* Fix the window's position when maximized
* Add support for dark theme on the frame
* DRY shared code between conhost and new terminal
* Fix drag bar and remove dead code
* Remove dead code and use cached DPI
* Refactor code
* Remove impossible TODO
* Use system metrics instead of hardcoding resize border height
* Use theme from app settings instead of system theme. Improve comments. Remove unused DWM frame on maximize.
* Fix initial position DPI handling bug and apply review changes
* Fix thick borders with DPI > 96
Closes#3064.
Closes#1307.
Closes#3136.
Closes#1897.
Closes#3222.
Closes#1859.
## Summary of the Pull Request
Adds support for Italics, Blinking, Invisible, CrossedOut text, THROUGH CONPTY. This does **NOT** add support for those styles to conhost or the terminal.
We will store these "Extended Text Attributes" in a `TextAttribute`. When we go to render a line, we'll see if the state has changed from our previous state, and if so, we'll appropriately toggle that state with VT. Boldness has been moved from a `bool` to a single bit in these flags.
Technically, now that these are stored in the buffer, we only need to make changes to the renderers to be able to support them. That's not being done as a part of this PR however.
## References
See also #2915 and #2916, which are some follow-up tasks from this fix. I thought them too risky for 20H1.
## PR Checklist
* [x] Closes#2554
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
<hr>
* store text with extended attributes too
* Plumb attributes through all the renderers
* parse extended attrs, though we're not renderering them right
* Render these states correctly
* Add a very extensive test
* Cleanup for PR
* a block of PR feedback
* add 512 test cases
* Fix the build
* Fix @carlos-zamora's suggestions
* @miniksa's PR feedback
