Compare commits

...

133 Commits

Author SHA1 Message Date
Leonard Hecker
d6707d2444 Update vsconfig 2022-11-30 23:05:43 +01:00
Mike Griese
f2eed92345 Fix a couple issues with experimental.useBackgroundImageForWindow (#14456)
This fixes two issues with `experimental.useBackgroundImageForWindow` I discovered while looking at #14260 

* It looks like the opacity of the whole-window BG image wouldn't hot reload if the path didn't. 
* > set useBGForWindow:true, focus a pane with an image, then set it to useBGForWindow:false, and observe a pane with <100 opacity. You'll be able to see the BG image left behind!

These are pretty easy to miss, so I can see how it happened. 

I don't think this _technically_ closes that thread, though. Ultimately, I think OP's settings were just wrong (and possible didn't hot-reload). There's another, trickier bit I'm discussing in that thread, that might deserve its own separate follow-up for discussion.
2022-11-29 23:09:03 +00:00
Leonard Hecker
b6b1ff8b2c Wait for clients to exit on ConPTY shutdown (#14282)
#14160 didn't fix #14132 entirely. There seems to be a race condition left
where (on my system) 9 out of 10 times everything works correctly,
but sometimes OpenConsole exits, while pwsh and bash keep running.

My leading theory is that the new code is exiting OpenConsole faster than the
old code. This prevents clients from calling console APIs, etc. causing them
to get stuck. The old code (and new code) calls `ExitProcess` when the ConPTY
pipes break and I think this is wrong: In conhost when you close the window we
only call `CloseConsoleProcessState` via the `WM_CLOSE` event and that's it.
Solution: Remove the call to `RundownAndExit` for ConPTY.

During testing I found that continuously printing text inside msys2 will cause
child processes to only exit slowly one by one every 5 seconds.
This happens because `CloseConsoleProcessState` calls `HandleCtrlEvent` without
holding the console lock. This creates a race condition where most of the time
the console IO thread is the one picking up the `CTRL_CLOSE_EVENT`. But that's
problematic because the `CTRL_CLOSE_EVENT` leads to a `ConsoleControl` call of
type `ConsoleEndTask` which calls back into conhost's IO thread and
so you got the IO thread waiting on itself to respond.
Solution: Don't race conditions.

## Validation Steps Performed
* `Enter-VsDevShell` and close the tab
  Everything exits after 5s 
* Run msys2 bash from within pwsh and close the tab
  Everything exits instantly 
* Run `cat bigfile.txt` and close the tab
  Everything exits instantly 
* Patch `conhost.exe` with `sfpcopy`, as well as `KernelBase.dll`
  with the recent changes to `winconpty`, then launch and exit
  shells and applications via VS Code's terminal 
* On the main branch without this modification remove the call to
  `TriggerTeardown` in `RundownAndExit` (this speeds up the shutdown).
  Run (msys2's) `bash.exe --login` and hold enter and then press Ctrl+Shift+W
  simultaneously. The tab should close and randomly OpenConsole should exit
  early while pwsh/bash keep running. Then retry this with this branch and
  observe how the child processes don't stick around forever anymore. 
2022-11-29 21:15:45 +01:00
Josh Soref
a7ab17571b Update to check-spelling v0.0.21 (#14455)
Upgrades check-spelling to v0.0.21

The command to apply changes should now work on Windows (it requires
Perl, but I believe that's more or less present most of the time, and it
should walk you through the rest of the required tools).

There are a bunch of new features, the most important here are probably
being able to update the metadata from Windows. (If it doesn't work,
please @ me).

Also, candidate.patterns will automatically suggest patterns. You can
see them in patterns.txt, e.g.:

```
# Automatically suggested patterns
# hit-count: 3831 file-count: 582
# IServiceProvider
\bI(?=(?:[A-Z][a-z]{2,})+\b)
```

The metadata bits (the hit count/file count) don't have to be retained
(I hope they'll be useful in deciding whether/or not to add a pattern,
i.e. "how applicable is it?"), the comment hinting at what the pattern
does is probably worth retaining.

We've been using more or less this version for a while internally
(including talk-to-bot, and, I do have a pattern that could be used to
let people use that in forks, but, I'm going to skip that for now).

This weekend, I did some cleanup for `act` (to run check-spelling
locally), and some minor polish.

You can see the runs I made in
https://github.com/check-spelling/terminal/actions
2022-11-28 13:35:07 -06:00
Leonard Hecker
8f346a7158 Rewrite Utf16Parser (#14417)
This commit replaces `Utf16Parser` with `<til/unicode.h>` which includes:
* `til::utf16_iterator` as a replacement for `Utf16Parser::Parse`
* `til::utf16_next` as a replacement for `Utf16Parser::ParseNext`

This fixes 2 bugs with `Utf16Parser`:
* Swallowing invalid surrogate pairs instead of turning them into U+FFFD.
* `std::vector<std::vector<wchar_t>>`. It's now >12000% faster.

## Validation Steps Performed
* New unit tests pass 
* Searching for narrow/wide characters in conhost works 
2022-11-23 21:13:36 +00:00
Junyoung Lee
437b5ac595 Add the setting "confirmCloseAllTabs" to SUI (#14419)
This commit adds the setting "confirmCloseAllTabs" to SUI.
The setting was added to the Interactions pane of Global Settings.

Closes #14413
Closes #14033
2022-11-21 22:03:56 +00:00
Ben Constable
feed768b3f [schema] Update allowed types for startingDirectory (#14408)
Update the schema to support null.

## PR Checklist
* [x] Closes #14299
* [x] Schema updated.
2022-11-21 16:02:24 -05:00
Mike Griese
937cadcad0 Spec for "matching" profiles in "New Tab Customization" (#12584)
Doc updated in response to some discussion in [#11326] and
[#7774]. In those PRs, it became clear that there needs to be a simple way of
collecting up a whole group of profiles automatically for sorting in these
menus. Although discussion centered on how hard it would be for extensions to
provide that customization themselves, the `match` statement was added as a way
to allow the user to easily filter those profiles themselves.

This was something we had originally considered as a "future consideration", but
ultimately deemed it to be out of scope for the initial spec review.

References:

* #1571
* #11326
* #7774
2022-11-18 14:13:15 -06:00
Dustin L. Howett
9aee510ce0 Add .git-blame-ignore-revs to make GitHub's blame view nicer (#14394)
Commits mentioned in this file will be acknowledged by GitHub, but
skipped in the blame view. Other tools use this as well.

You can make git use it by passing
`--ignore-revs-file .git-blame-ignore-revs` to `git blame`.

The only commits we're ignoring right now are codebase-wide reformatting
or line endings changes.
2022-11-15 18:49:57 -06:00
Dan Moseley
c9aeea1fdc Update bug template to help find the version number accurately (#14375)
Due to https://github.com/microsoft/terminal/issues/14335 using `wt -v` is not recommended. BTW, it might be nice if Ctrl-Shift-P and typing "about" or "version" gave the version, too.
2022-11-14 22:00:11 +00:00
Ian O'Neill
6b4b63b18a Ensure reading the buffer content actually returns the content (#14379)
## Summary of the Pull Request
Ensures that reading the buffer content actually returns the content.

## References
Regressed in #13626.

## PR Checklist
* [x] Closes #14378
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed

## Validation Steps Performed
Added a test.
2022-11-12 23:31:10 +00:00
Leonard Hecker
a01500f051 Rewrite ROW to be Unicode capable (#13626)
This commit is a from-scratch rewrite of `ROW` with the primary goal to get
rid of the rather bodgy `UnicodeStorage` class and improve Unicode support.

Previously a 120x9001 terminal buffer would store a vector of 9001 `ROW`s
where each `ROW` stored exactly 120 `wchar_t`. Glyphs exceeding their
allocated space would be stored in the `UnicodeStorage` which was basically
a `hashmap<Coordinate, String>`. Iterating over the text in a `ROW` would
require us to check each glyph and fetch it from the map conditionally.
On newlines we'd have to invalidate all map entries that are now gone,
so for every invalidated `ROW` we'd iterate through all glyphs again and if
a single one was stored in `UnicodeStorage`, we'd then iterate through the
entire hashmap to remove all coordinates that were residing on that `ROW`.
All in all, this wasn't the most robust nor performant code.

The new implementation is simple (from a design perspective):
Store all text in a `ROW` in a regular string. Grow the string if needed.
The association between columns and text works by storing character offsets
in a column-wide array. This algorithm is <100 LOC and removes ~1000.

As an aside this PR does a few more things that go hand in hand:
* Remove most of `ROW` helper classes, which aren't needed anymore.
* Allocate backing memory in a single `VirtualAlloc` call.
* Rewrite `IsCursorDoubleWidth` to use `DbcsAttrAt` directly.
  Improves overall performance by 10-20% and makes this implementation
  faster than the previous NxM storage, despite the added complexity.

Part of #8000

## Validation Steps Performed
* Existing and new unit and feature tests complete 
* Printing Unicode completes without crashing 
* Resizing works without crashing 
2022-11-11 20:34:58 +01:00
Leonard Hecker
c12dc2aa4d Fix VtIoTests for debug builds (#14358)
1774cfd added a debug assertion in `CreateIoHandlers` which broke this test.
2022-11-10 15:58:10 +00:00
James Holderness
88c3ef68a5 Add support for the rectangular area operations (#14285)
## Summary of the Pull Request

This PR adds support for the rectangular area escape sequences:
`DECCRA`, `DECFRA`, `DECERA`, `DECSERA`, `DECCARA`, `DECRARA`, and
`DECSACE`. They provide VT applications with an efficient way to copy,
fill, erase, or change the attributes in a rectangular area of the
screen.

## PR Checklist
* [x] Closes #14112
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #14112

## Detailed Description of the Pull Request / Additional comments

All of these operations take a rectangle, defined by four coordinates.
These need to have defaults applied, potentially need to be clipped
and/or clamped within the active margins, and finally converted to
absolute buffer coordinates. To avoid having to repeat that boilerplate
code everywhere, I've pulled that functionality out into a shared method
which they all use.

With that out of the way, operations like `DECFRA` (fill), `DECERA`
(erase), and `DECSERA` (selective erase) are fairly simple. They're just
filling the given rectangle using the existing methods `_FillRect` and
`_SelectiveEraseRect`. `DECCRA` (copy) is a little more work, because we
didn't have existing code for that in `AdaptDispatch`, but it's mostly
just cloned from the conhost `_CopyRectangle` function.

The `DECCARA` (change attributes) and `DECRARA` (reverse attributes)
operations are different though. Their coordinates can be interpreted as
either a rectangle, or a stream of character positions (determined by
the `DECSACE` escape sequence), and they both deal with attribute
manipulation of the target area. So again I've pulled out that common
functionality into some shared methods.

They both also take a list of `SGR` options which define the attribute
changes that they need to apply to the target area. To parse that data,
I've had to refactor the `SGR` decoder from the `SetGraphicsRendition`
method so it could be used with a given `TextAttribute` instance instead
of just modifying the active attributes.

The way that works in `DECCARA`, we apply the `SGR` options to two
`TextAttribute` instances - one with all rendition bits on, and one with
all off - producing a pair of bit masks. Then by `AND`ing the target
attributes with the first bit mask, and `OR`ing them with the second, we
can efficiently achieve the same effect as if we'd applied each `SGR`
option to our target cells one by one.

In the case of `DECRARA`, we only need to create a single bit mask to
achieve the "reverse attribute" effect. That bit mask is applied to the
target cells with an `XOR` operation.

## Validation Steps Performed

Thanks to @KalleOlaviNiemitalo, we've been able to run a series of tests
on a real VT420, so we have a good idea of how these ops are intended to
work. Our implementation does a reasonably good job of matching that
behavior, but we don't yet support paging, so we don't have the `DECCRA`
ability to copy between pages, and we also don't have the concept of
"unoccupied" cells, so we can't support that aspect of the streaming
operations.

It's also worth mentioning that the VT420 doesn't have colors, so we
can't be sure exactly how they are meant to interpreted. However, based
on the way the other attribute are handled, and what we know from the
DEC STD 070 documentation, I think it's fair to assume that our handling
of colors is also reasonable.
2022-11-10 15:18:13 +00:00
James Holderness
1b09ae3b95 Prevent conhost scrollbar overlapping content (#14329)
Prior to this PR, the conhost vertical scrollbar would be forced to be
visible whenever the "Disable Scroll-Forward" option was set. It was
assumed that it would be needed as soon as the current viewport was
filled, so it was better to start off visible and disabled.

When the viewport height and buffer height are the same, though, the
scrollbar is never needed, and conhost compensates for that by making
the window narrower. But since we were still forcing the scrollbar to be
visible, that would result in it overlapping content in the rightmost
columns.

This PR attempts to fix that issue by simply leaving the scrollbar to
decide the visibility itself. This is perhaps not as aesthetically
pleasing when it starts off hidden and then later becomes visible, but
that seems better than having it overlap the content.

I've manually confirmed this fixes the problem reported in issue #2449.

Closes #2449
2022-11-10 15:17:26 +00:00
PankajBhojwani
7aa7ce2bce Remove constexpr from _altBufferMarks (#14360)
## Summary of the Pull Request
Compiler was raising the error: `expression did not evaluate to a constant.`, causing the solution to fail when building. Removing this `constexpr` fixes it.

## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx

## Validation Steps Performed
Solution builds now
2022-11-09 21:21:19 +00:00
PankajBhojwani
0f81deb7c0 Clean up velocity for Feature_AdjustIndistinguishableText in Terminal (#13972)
Changes the velocity flag for AdjustIndistinguishableText to only be disabled for conhost
Closes #13508
2022-11-09 00:36:40 +00:00
Leonard Hecker
48325f9aca Re-enable AuditMode for TerminalCore (#14344)
AuditMode was accidentally disabled in 1c6aa4d, around 2 years ago.
This should fix this issue and address all the warnings it now generates.

Related to #14129.
2022-11-08 19:06:58 +00:00
Leonard Hecker
8695d9ee4b Fix Helix failures by updating the SDK (#14353)
This mirrors microsoft/WinUI !8045797 and appears to resolve our recent Helix
pipeline failures, due to a python script issue (see Helix logs).
2022-11-08 18:26:43 +00:00
Leonard Hecker
a798a603e1 Initialize all members of Terminal (#14345)
The following members were not initialized during construction:
* `CursorType _defaultCursorShape`
* `bool _suppressApplicationTitle`
* `bool _bracketedPasteMode`
* `size_t _hyperlinkPatternId`
* `SelectionExpansion _multiClickSelectionMode`
* `til::CoordType _scrollbackLines`

Unlike gcc and clang, MSVC is fairly tame when it comes to removing code
tainted by undefined behavior, so the most likely affect this had is that
we were reading uninitialized memory.

Related to #14129.
2022-11-07 23:16:03 +00:00
Carlos Zamora
62b34cf6f7 Apply AutoProps to TextBox settings in SUI (#14178)
We already were setting the automation properties on the expander, however, we were not setting it on the content when an expander was present. This change applies the automation properties to both the expander and the child content (i.e. TextBox).

Closes #13827
2022-11-04 19:13:59 +00:00
Mike Griese
f25d258a43 Clarify which wt should be run
As noted in #14335. Closes #14335
2022-11-04 13:58:37 -05:00
Dustin Howett
cfdea71dc0 Merge remote-tracking branch 'openconsole/inbox' 2022-11-02 17:56:48 -05:00
Hamza Nauman
86928bb48d Merged PR 8072712: [Git2Git] Fix conhost crash due to cmd.exe launch race
There is a condition which causes the console host process (conhost.exe)
to crash with a `FAIL_FAST` in `WriteCharsLegacy`.

**_Repro Scenario:_** Two conditions need to be met for crash to happen:

1. The `ENABLE_PROCESSED_OUTPUT` console mode needs to be disabled. This
   condition is met through the race condition, explained in the section
   below.
2. We are printing a string where there is a full width character
   (character that requires two spaces on the screen) being printed at
   the edge of the console window. That is, we have one character space
   available, and the character requires 2 spaces.

Running following script (attached to bug) causes a crash:
`for /l %%A in (0, 1, 10000) do start /B C:\test.bat`

The script `test.bat` repeatedly prints a console-width line
with a DBCS character that doesn't fit.

_**Race:**_ Normally, we get into `WriteCharsLegacy` with
`PROCESSED_OUTPUT` enabled. However, during the initialization of a new
CMD session, `cmd!ResetConsoleMode()` is called, which first sets the
output console mode to the value of `curOutputMode` (which is a static
variable initialized to 0) by calling `SetConsoleMode()`, before then
setting it to the desired output mode with processed output enabled:

```c++
void ResetConsoleMode( void )
{
    static DWORD desOutMode = ENABLE_PROCESSED_OUTPUT | /* ... */;

    SetConsoleMode(conOut, curOutputMode); // <------ sets console mode to 0, disabling processed output
    if (GetConsoleMode(conOut, &curOutputMode)) {
        if ((curOutputMode & desOutMode) != desOutMode) {
            curOutputMode |= desOutMode;

            if (!SetConsoleMode(conOut, curOutputMode) && /* ... */) // <----- enables processed output
```

If there is another instance of CMD that is producing output in between
these two `SetConsoleMode()` calls, then we may end up in
`WriteCharsLegacy` with processed output mode disabled.

This fix removes a `FAIL_FAST_IF` that checks for `PROCESSED_OUTPUT`
mode after the initial character processing loop.

Before RS5, this was an `ASSERT()`. This FAIL_FAST was added in RS5 in
PR !1794053 (which changed all `ASSERT`-likes to `FAIL_FAST_IF`.)

We believe this assertion guarded only the "processing" of Backspace,
Tab, CR and LF, and did not expect that we would get out of the
character processing loop with unprocessed glyph characters.  The
`FAIL_FAST` is redundant in this case, as the handlers for the
Backspace, Tab, CR and LF characters we are already checking for
`PROCESSED_OUTPUT`. Therefore, it is safe to remove this `FAIL_FAST`.

It turns out that we *can* exit the loop with unprocessed glyph
characters. In these cases, we don't want to `FAIL_FAST`.

# Validation
* Basic sanity testing to confirm strings are correctly being printed.
* Repro scenario script no longer crashes conhost.exe

Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 eb5d8064dc0f09d8be92efb5e6efa69983f30a3f

Related work items: MSFT-42055103
2022-11-02 17:50:00 -05:00
Leonard Hecker
bb4711de54 AtlasEngine: Fix a heap overflow bug (#14275)
`TextBuffer` is buggy and allows a `Trailing` `DbcsAttribute` to be written
into the first column. Since other code then blindly assumes that there's a
preceding `Leading` character, we'll get called with a X coordinate of -1.
This issue will be fixed by #13626 and this commit fixes it in the meantime.

Additionally fixes an unimportant crash when the window height is 0px,
because it was annoying during testing and doesn't hurt to be fixed.

## Validation Steps Performed
* Run a stress test that prints random Unicode at random positions
* Resize the window furiously at the same time
* Doesn't crash / fail-fast 
2022-11-02 03:11:59 +01:00
PankajBhojwani
23a02c5218 Reorder the color chips grid in the color schemes page (#14223)
XAML has an issue in windows 10 where `Width="*"` does not work properly
inside the `DataTemplate` for a `ListView`. Because of this, the color
scheme list view items looked very strange in windows 10 (see #14187).

Thanks to that, we thought up a few new designs for the color schemes
page and selected a new one that blends the color chips with a region
that shows the foreground and background color with the text preview.

Closes #14187
2022-11-01 17:22:46 +00:00
Rose
2119164d43 Fix C# warnings across the project, modernize slightly (#13938)
No behavioral changes, just C# modernizations.
2022-11-01 17:07:51 +00:00
Leonard Hecker
b4d37d8c70 Add recursive_ticket_lock and use it for Terminal (#13746)
My hope with this commit is to make our code more robust against accidental
recursive locking, as well as making it easier to write code with confidence,
with only a slight performance trade-off.

## Validation Steps Performed
* Playing Pac Man music through MIDI 
* Windows Terminal runs happily ever after 
2022-10-31 23:07:59 +00:00
Leonard Hecker
b4fce27203 Skip DECPS/MIDI output on Ctrl+C/Break (#14214)
Silent MIDI notes can be used to seemingly deny a user's input for long
durations (multiple minutes). This commit improves the situation by ignoring
all DECPS sequences for a second when Ctrl+C/Ctrl+Break is pressed.

Additionally it fixes a regression introduced in 666c446:
When we close a tab we need to unblock/shutdown `MidiAudio` early,
so that `ConptyConnection::Close()` can run down as fast as possible.

## Validation Steps Performed
* In pwsh in Windows Terminal 1.16 run ``while ($True) { echo "`e[3;8;3,~" }``
  * Ctrl+C doesn't do anything 
  * Closing the tab doesn't do anything 
* With these modifications in Windows Terminal:
  * Ctrl+C stops the output 
  * Closing the tab completes instantly 
* With these modifications in OpenConsole:
  * Ctrl+C stops the output 
  * Closing the window completes instantly 
2022-10-31 17:18:16 -05:00
Jeroen B
8ea3cb9972 Disable acrylic material (temporarily) when opacity is set to 100% (#14193)
If the opacity is set to 100%, the background becomes solid instead of 'fully opaque acrylic'. If the opacity is below 100% the acrylic material is re-enabled (depending on the user's settings).

## Validation Steps Performed

I updated two unit tests to reflect the change in behavior and manually tested the transition from <100% opacity to 100% opacity (and vice versa) on win11.

Steps:
1. Start with 100% opacity and acrylic material enabled.
2. Decrease opacity and observe acrylic effect.
3. Increase opacity back to 100% and disable the acrylic effect.
4. Decrease opacity and notice that acrylic effect is no longer there.

Closes #12880
2022-10-26 23:19:36 +00:00
Leonard Hecker
2b851caeed Disable /fp:fast by default (#14267)
Lately I've been a bit concerned about issues resulting from b036cab enabling
`/fp:fast` throughout the entire project. This commit reverts that change and:
* Enables `/fp:contract` which defaults to off since VS 17.0
  This re-enables FMA for floats on ARM64. Since this doesn't affect NANs, etc.
  I don't expect any issues apart from a slight change in float accuracy.
* Introduces `TIL_FAST_MATH_BEGIN` with which `/fp:fast` can be selectively
  enabled for code that benefits from it like `ColorFix.cpp`.

Without `TIL_FAST_MATH_BEGIN` `ColorFix` is about twice as slow
(which is actually very noticeable in real life).
This PR doesn't produce any noticeable performance regressions.

## Validation Steps Performed
* Patch `RenderSettings.hpp` to include `Mode::AlwaysDistinguishableColors`
* Run a color intense application in AtlasEngine and observe CPU usage
2022-10-26 18:49:02 +00:00
PankajBhojwani
aa625098ed Allow for exe/dll paths for the Icon setting (#14107)
## Summary of the Pull Request
Allow exe/dll paths for the `Icon` setting

The exe/dll icon needs to work in all the following areas:
* [x] The tab
* [x] The navigation view item in the SUI
* [x] The new tab flyout
* [x] The command palette

## PR Checklist
* [x] Closes #1504 
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx

## Detailed Description of the Pull Request / Additional comments
For the command palette, we had to switch to using `ContentPresenter` because `IconSourceElement` cannot take in every type of icon we need to provide

## Validation Steps Performed
Setting "%SystemRoot%\System32\shell32.dll,214" as the icon for a profile works in all the cases listed above.
2022-10-26 18:12:32 +00:00
PankajBhojwani
85ca8f556c Respect the "/max" parameter when starting console apps with defterm enabled (#14222)
## Summary of the Pull Request

- Pipe the `ShowWindow` value through to `ConptyConnection`
- When `TerminalPage` receives the new connection, it checks the `ShowWindow` value and maximizes *IF* there were no other pre-existing tabs (in glomming mode, we don't want to maximize sessions that did not ask for it)

## References
#12154 

## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx

## Detailed Description of the Pull Request / Additional comments
This is just a temporary solution until we change our defterm handoff process. Because of the way the process currently works, we have no way of knowing that the connection has requested the window to be maximized until after we have already started a terminal session. This means that we have to manually maximize the window upon receiving the connection, instead of having the session _start_ maximized, as it probably should. 

## Validation Steps Performed
`start /max python` with defterm enabled opens up python in a maximized WT window
2022-10-26 18:04:07 +00:00
James Holderness
afefe693df Add support for private options in DSR queries (#14290)
The original implementation of the _Device Status Report_ sequence was
only capable of handling ANSI status queries. This PR adds the ability
to respond to private DEC queries as well.

To prove it's working as intended, I've also included support for the
DEC extended cursor position report (`DECXCPR`), which is essentially
the same as the ANSI cursor position report, but with an additional
parameter indicating the page number. Until we support paging, though,
that value is just hardcoded to 1.

## References

The method for distinguishing between ANSI options and the private DEC
options is based on the updates made to the `SM`/`RM` mode sequences in
PR #8469.

## Validation Steps Performed

I've added a couple of unit tests covering the `DECXCPR` report, and
also manually confirmed we now pass the _Extended Cursor-Position_ test
in vttest.

Closes #14206
2022-10-25 18:41:01 +00:00
Dustin Howett
7c8f74259d Migrate OSS up to 3eaa78149 2022-10-25 10:55:49 -05:00
Dustin Howett
0c130fa65b Merged PR 8030958: [Git2Git] Merged PR 8017580: Emit traces to determine user opt-in status for Default-by-default
[Git2Git] Merged PR 8017580: Emit traces to determine user opt-in status for Default-by-default

We already have tracing in the console host that tells us when a
console session was successfully handed off to a Terminal. However, that
doesn't provide us enough information about Windows' intent in doing
so--namely, (1) whether the user _wanted_ that handoff to happen, OR (2)
whether the user has opted out because they didn't want it to happen.

(1) looks like any other hand-off, which will pollute our statistics
(2) doesn't generate any messages, because we fail out of handoff before
logging a single thing.

This pull request adds new, better events.

The events look like this (in TVPP):

```
Microsoft.Windows.Console.Host	ConsoleHandoffSessionStarted
handoffCLSID: 	{2eaca947-7f5f-4cfa-ba87-8f7fbeefbe69}
handoffTargetChosenByWindows: 	true
```

```
Microsoft.Windows.Console.Host	ConsoleHandoffSessionStarted
handoffCLSID: 	{2eaca947-7f5f-4cfa-ba87-8f7fbeefbe69}
handoffTargetChosenByWindows: 	false
```

```
Microsoft.Windows.Console.Host	ConsoleHandoffSessionStarted
handoffCLSID: 	{b23d10c0-e52e-411e-9d5b-c09fdf709c7d}
handoffTargetChosenByWindows: 	false
```

Cherry picked from !7583836
Cherry-picked from commit `26f311e2`.

Fixes MSFT-41943733

Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 2c876875f24263409175e986102862eda4f09f32
2022-10-25 15:45:00 +00:00
Carlos Zamora
3eaa781499 Remove redundant tooltips from settings UI (#14244)
## Summary of the Pull Request
This removes all of the redundant tooltips from the settings UI. Since all of the settings are added through the SettingsContainer, it's a pretty simple change.

Closes #14184

## Validation Steps Performed
- [X] hover over all settings in the settings UI
- [X] hover over all entries in the SUI nav view
2022-10-24 19:38:27 +00:00
Leonard Hecker
bbc14a0baf Use float throughout ColorFix (#14266)
This is just a quick drive-by improvement. Switching from double to float
roughly doubles performance on a contemporary x86 CPU with `/fp:fast`.

## Validation Steps Performed
* Patch `RenderSettings.hpp` to include `Mode::AlwaysDistinguishableColors`
* Run a color intense application in AtlasEngine and observe CPU usage
2022-10-24 18:49:39 +00:00
Leonard Hecker
b674ac5c19 Fix a test failure in HashTests (#14277)
744ca24 broke `HashTests` as it renamed a preprocessor definition.
2022-10-21 12:19:34 -05:00
Dustin Howett
744ca2450a Merge remote-tracking branch 'openconsole/inbox' 2022-10-20 15:08:04 -05:00
Dustin Howett
f88ef02c98 Merged PR 8014375: [Git2Git] Build fixes on top of bfd480b88
This pull request introduces a number of source files to ut_til/sources.

Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 35865f47ced9103b02b06a1eb8d43d26b420af99
2022-10-20 20:07:00 +00:00
Dan Albrecht
bcf2422c4d Remove vestigial submodule entry (#14248)
Remove vestigial submodule entry

## References
#12778 removed the actual WIL submodule, but there was still an entry left in the `.gitmodules` file that was causing me confusion about an orphaned submodule directory I had in an old copy of the repo.

## Validation Steps Performed
 - Official validation checks passed
 - Build still works locally after a `git clean -fdx`
2022-10-20 18:49:27 +00:00
Dustin Howett
7e7a69ff7c Migrate OSS up to bfd480b88 2022-10-20 13:29:14 -05:00
Leonard Hecker
bfd480b885 Fix circular TermControl reference (#14228)
This regression was introduced in b3c9f01. Since `TermControl` is the XAML
object that owns its scrollbar and the scrollbar's `VisualStateManager`
a strong reference back to the `TermControl` results in a circular reference.

## Validation Steps Performed
* Set a breakpoint on `TermControl::~TermControl()`
* Breakpoint hits on tab close 
2022-10-17 21:14:00 +00:00
Ian O'Neill
6d94fbc89f Update XamlStyler version (#14230)
Updates the version of XamlStyler to one with support for .NET 6.0. The version used before this depended on .NET 3.1, [which goes out of support on 2022-12-13.](https://dotnet.microsoft.com/en-us/platform/support/policy/dotnet-core)

This shouldn't be controversial as .NET 6.0 is included with VS 2022, unlike .NET 3.1.
2022-10-17 17:48:10 +00:00
Ian O'Neill
42befa7b58 Override center on launch setting when position specified on cmdline (#14229)
Override the center on launch setting when a position is specified on the commandline.

## Validation Steps Performed
1. Set center on launch in the SUI.
2. Run `wtd` - the new window is centered.
3. Run `wtd --pos 100,200` - the new window is positioned at (100,200).

Closes #14176
2022-10-17 17:44:45 +00:00
Leonard Hecker
97abc3df1d AtlasEngine: Block chars done right-er (#14099)
This commit makes the following improvements:
* Only adjust block characters that come from fallback fonts. This ensures
  that the glyphs of the chosen font all look exactly as they were designed.
* When adjusting the size, use the fallback font's full block glyph U+2588
  to determine the size that the given glyph should have.

Closes #14098

## Validation Steps Performed
* Print `UTF-8-demo.txt` in Consolas.
* All block glyphs look uniform. 
2022-10-17 17:25:08 +00:00
d-caldasCaridad
8ef18d3c88 README: Fix the winget install instructions (#14236) 2022-10-17 12:13:16 -05:00
Dustin L. Howett
1f19ed0cd2 Fix the Release build ProxyStubClsids from #13570 (#14225)
These were wrong.
2022-10-15 07:58:03 +00:00
Dustin L. Howett
2a5ce4900f Stop freeing BSTRs that do not belong to us (#14224)
The `BSTR` arguments originate from COM calls who own them.
Found via AppVerifier.
2022-10-15 07:00:04 +00:00
Dustin L. Howett
ab04067e49 Disallow a window waiting on system() to block DefTerm startup (#14195)
We'll just ping the window and give it a chance to respond before we
bunk with it.

Fixes #14131
2022-10-14 21:50:22 +00:00
Dustin L. Howett
18e4e22394 OpenHere: stop failing if there's no site... (#14211)
It cannot be known why there is no site.
We should at least not crash.

Fixes MSFT-41571451
2022-10-14 14:32:06 -05:00
Bjorn Neergaard
33cb0eb05f Fix a missing entry for intenseTextStyle in the Profile schema (#14210)
Fix a missing entry in the JSON schema for `intenseTextStyle`.

The JSON schema was missing an entry in the Profile section for
`intenseTextStyle`. I have added it as it appears in AppearanceConfig.
Note that this is currently duplicated in the schema -- however, this is
the pattern used already in Profile as AppearanceConfig entries have
alternate descriptions (and I have updated the description in that
section to make it clear it applies to unfocused terminals).
Longer-term, it likely makes sense to consolidate all entires into
ApperanceConfig and rely on the description for the `unfocusedApperance`
object/the name of the object to make the limited scope of those keys
clear, so that Profile can simply extend ApperanceConfig and the
duplication in the schema can be reduced.

## Validation Steps Performed
Validation with schema verifying tools including VS Code.

Partially addresses #13387
2022-10-14 14:30:44 -05:00
Dustin L. Howett
d319d479c7 Pipe DirectKey events into TerminalPage for Alt+Space (#14221)
This pull request operates on the same theory as #14217, but at a lower
level. Carlos and I discovered that TerminalPage *already* has an
action-dispatching key preview handler, and that my implementation of
`IDirectKeyListener` handles focus-tree bubbling mostly correctly.

Because of that discovery, we learned we could move the
`IDirectKeyListener` into TerminalPage itself and not have to complicate
the SUI or the Command Palette with the DirectKey interface.

Validation:
When bound to Alt+Space, the system menu works in the command palette,
the settings UI, and in read-only panes.

Fixes #11970
Closes #14217
Fixes MSFT-41390832
2022-10-14 19:19:44 +00:00
James Holderness
0022898fe8 Make sure VT reports still work when DECARM is disabled (#14216)
The way `DECARM` was initially implemented, we checked for repeated key
presses by matching the last recorded virtual key code, and used a 0 key
code to indicate that no key was pressed. This caused the VT query
responses to fail, because they generated key events with a 0 key code,
and that would end up being detected as a repeated key that should be
suppressed.

This PR fixes that issue by using a `std::optional` to track the last
key code, so if no key has been pressed we can represent that with
`std::nullopt`, and there's no way that can be confused with a genuine
key press.

The `DECARM` mode was introduced in PR #13981.

## Validation Steps Performed
I've manually tested in Vttest to confirm that the query reports are now
working again, even when `DECARM` is disabled. I've also checked that
`DECARM` itself it still working as expected.

Closes #14208
2022-10-14 17:39:36 +00:00
Leonard Hecker
1774cfd843 Fix a deadlock during ConPTY shutdown (#14160)
Problem:
* Calling `RundownAndExit` tries to flush out the last frame from `VtEngine`
* `VtEngine` indirectly calls `RundownAndExit` if the pipe is gone via `VtIo`
* `RundownAndExit` is called by other parts of OpenConsole
* `RundownAndExit` must be `[[noreturn]]` for most parts of OpenConsole
* `VtIo` itself has a mutex ensuring orderly shutdown
* In short, doing a thread safe orderly shutdown requires us to hold both,
  a lock in `RundownAndExit` and `VtIo` at the same time, but while other parts
  need a blocking `RundownAndExit`, `VtIo` needs a non-blocking one
* Refactoring the code to use optionally non-blocking `RundownAndExit`
  requires refactoring and might prove to be just as buggy

Solution:
* Simply don't call `RundownAndExit` in `VtEngine` at all
* In case the write pipe breaks:
  * `VtEngine` will close the handle
  * The client should notice that their read pipe is broken and
    close their write pipe sooner or later
  * Once we notice that our read pipe is broken, we call `RundownAndExit`
  * `RundownAndExit` might call back into `VtEngine` but
    without a pipe it won't do anything
* In case the read pipe breaks or any other part calls `RundownAndExit`:
  * We call `RundownAndExit`
  * `RundownAndExit` might call back into `VtEngine` and depending on whether
    the write pipe is broken or not it will simply write into it or ignore it

Closes #14132
Pretty sure this also applies to #1810

## Validation Steps Performed
* Open 5 tabs and run MSYS2's `bash --login` in each of them
* `Enter-VsDevShell` in another tab
* Close window
* 5 tab processes are killed instantly, 1 after ~3s 
* Replace conhost with OpenConsole via sfpcopy
* Launch Dozens of Git Bash tabs in VS Code
* Close them randomly
* Remaining ones still work, processes are gone 
2022-10-13 23:17:32 +00:00
Dustin L. Howett
07201d6cd1 Add a maximum OSC 8 URI length of 2MB following iTerm2 (#14198)
c0b2f488c1

Unlike iTerm2, we're not planning on making it configurable.

This commit also adds a max length of 1024 characters on the "display URI" that we pass up to XAML, so as to not inundate the UI.

Fixes #14200
2022-10-12 22:16:38 +00:00
Rose
eebea5129c Fix a few C++ Warnings, default a bunch of ctors/dtors (#13926)
No behavioral changes, just some modernizations like replacing empty methods with default and using _v instead of ::value for some types.
2022-10-12 12:58:10 -07:00
PankajBhojwani
6033ae66c5 Update LaunchPosition to use int32_t instead of int64_t (#14190)
Since #13730 merged, when we parse LaunchPosition we treat the
coordinates as `int32_t`. This PR updates the actual `LaunchPosition`
struct to also use `int32_t` for consistency.

## Validation Steps Performed
Terminal still builds and runs
2022-10-12 17:01:00 +00:00
Rose
e4b80e2ef3 Generally tidy the Commandline class (#14092)
This pull request adds a couple `const` keywords, simplifies a bit of boolean logic,
adds the `static` keyword to `Commandline::IsEditLineEmpty`, and a couple more things.
2022-10-12 14:22:34 +00:00
PankajBhojwani
6803cfb96f Fix some issues with the launch parameters in the SUI (#14186)
Addressing post-hoc comments on the launch parameters expander in the SUI (added in #13605)

- Use more contextually appropriate strings (`Centered` instead of `On` / `Off`)
- Don't emit an extra `NotifyChanges`

References #13605
2022-10-11 23:28:14 +00:00
Jeroen B
8f08bb04d0 Fix duplication issue for unfocused tabs (#13964)
Instead of using the currently focused tab when an unfocused tab is duplicated, the `_MakePane(...)` function now uses an optional source tab argument that points to the correct tab being duplicated.

## Validation Steps Performed

Manually tested on multiple tabs with different profiles. Performed steps:

* Construct at least two tabs with different profiles.
* Select `Duplicate Tab` option from the dropdown menu of the unfocused tab.
* Verify that the new tab has the same profile as the tab it was duplicated from.

Closes #13942
2022-10-11 18:25:33 -05:00
Carlos Zamora
30046dd4a7 Make SUI breadcrumb readable by screen readers (#14180)
The breadcrumbs in the SUI were not readable by screen readers because they are represented as a button with a text block inside of it. Turns out, if you make the DataTemplate's item `IStringable` (meaning it has a `ToString()`), it all magically works! Allowing the screen reader to read the button as text.

Closes #13826
2022-10-11 23:17:54 +00:00
James Holderness
cacf66860f Add support for DECARM (Auto Repeat Mode) (#13981)
This PR adds support for the `DECARM` (Auto Repeat Mode) sequence, which
controls whether a keypress automatically repeats if you keep it held
down for long enough.

Note that this won't fully work in Windows Terminal until issue #8440 is
resolved.

Every time we receive a `KeyDown` event, we record the virtual key code
to track that as the last key pressed. If we receive a `KeyUp` event the
matches that last key code, we reset that field. Then if the Auto Repeat
Mode is reset, and we receive a `KeyDown` event that matches the last
key code, we simply ignore it.

## Validation Steps Performed

I've manually tested the `DECARM` functionality in Vttest and confirmed
that it's working as expected. Although note that in Windows Terminal
this only applies to non-alphanumeric keys for now (e.g. Tab, BackSpace,
arrow keys, etc.)

I've also added a basic unit test that verifies that repeated key
presses are suppressed when the `DECARM` mode is disabled.

Closes #13919
2022-10-10 16:33:06 -07:00
Jonathan Meier
21a9c55752 Fix clipped progress ring in tab when tab title is too long (#14167)
It turns out that the negative margin for the progress ring is causing
the clipping in case the tab title gets too long:

43dbbd590f/src/cascadia/TerminalApp/TabHeaderControl.xaml (L18-L27)

The negative margin was introduced in #8113 because the progress ring is
supposed to replace the tab icon but the `TabView` still reserves space
even if no icon is set (see
https://github.com/microsoft/terminal/pull/8133#issuecomment-739098014).
However, it is not actually the `TabView` reserving space even when
there is no icon, but a workaround for a crash in the
`IconPathConverter` that returns a `BitmapIconSource` with a `nullptr`
source instead of a `nullptr` `IconSource`:

43dbbd590f/src/cascadia/TerminalSettingsModel/IconPathConverter.cpp (L143-L154)

The workaround in `IconPathConverter` could probably be removed as I did
not find any instance where it is still used in a way that could trigger
the mentioned crash, but I did not dare to just remove it as I do not
know enough about the code by far. Hence, I opted to just locally
instantiate the `IconSource` with a `nullptr` directly in `TerminalTab`.

Fixes #8910
2022-10-10 17:41:55 +00:00
Ian O'Neill
43dbbd590f Add --pos and --size cmdline args (#13730)
Adds `--pos`, and `--size` commandline arguments to `wt`.

Closes #4620
2022-10-07 16:41:09 -07:00
Rose
3517a6a3f1 Update scratch projects to XAML 2.7.3 (#14159)
This will let those projects build. I forgot to include them last time for some reason.

See PR #14123
2022-10-07 22:21:15 +00:00
Rose
d6ac717a48 Update target .NET version to .NET 6 (#14137)
.NET 6 is the latest LTS, and we should use that instead of .NET Core 3.1
2022-10-07 20:08:40 +00:00
James Holderness
657dd5f43e Add support for selective erase operations (#14046)
This PR adds support for the selective erase escape sequences: `DECSED`,
`DECSEL`, and `DECSCA`. They provide a way of marking certain areas of
the screen as "protected", so you can erase the content everywhere else
without affecting those protected areas.

This adds another bit in the `CharacterAttributes` enum to track the
protected status of each cell, and an operation triggered by the
`DECSCA` sequence which can toggle that bit in the active attributes.

There there are two new erase operations triggered by the `DECSED` and
`DECSEL` sequences, which work similar to the existing `ED` (erase in
display) and `EL` (erase in line) operations, but which only apply to
unprotected cells.

I've also updated the `DECRQSS` settings request, so you can query the
active protected attribute status.

## Validation Steps Performed

I've manually confirmed that we pass the selective erase tests in Vttest
now, and I've also manually tested some more complicated edge cases and
confirmed that we match the behavior of the hardware VT240 emulator in
MAME.

For unit testing I've extended the existing erase tests to cover
selective erase as an additional option, I've added a test covering the
`DECSCA` sequence, and I've extended the `DECRQSS` adapter test to
confirm the attribute reporting is working.

Closes #14029
2022-10-07 09:49:23 -07:00
Rose
11ad04754d Update to XAML 2.7.3 (#14123)
And the prerelease version of it
2022-10-07 00:13:57 +00:00
Leonard Hecker
51c0b423fb Upgrade to Windows SDK 22621 (#14135)
The diff between the 22000 and 22621 SDKs is fairly small, but it does include
a number of C++ correctness fixes, updates to libraries like DirectXMath and
the latest updates to DirectWrite and DXGI which I make heavy use off.

## Validation Steps Performed
* It builds 
2022-10-07 00:09:27 +00:00
Rose
d7e24ad6d0 Update libpopcnt to 2.5 (#14140) 2022-10-06 23:43:42 +00:00
Rose
a63f060f72 Update IntervalTree.h dependency (#14148)
This was the last update since 2021
2022-10-06 23:42:20 +00:00
Carlos Zamora
5608cf15a3 [wpf] Add UIA events (#14097)
Adds UIA events to the WPF control for the following items:
- selection changed
- text changed (and output)
- cursor changed

### Automation Peer
Similar to the architecture of the UWP TermControl, we added a
`HwndTerminalAutomationPeer` which acts as the
`TermControlAutomationPeer` in UWP. However, we don't need a XAML
wrapper here, so really we just need it to inherit from
`TermControlUiaProvider` (the `ITextProvider` implementation shared
across conhost and WT) and `IUiaEventDispatcher` (the event dispatching
interface that is responsible for signaling the screen reader that
something has changed).

### Removing the local echo
As with WT, we need to record key events to remove the local echo. These
recorded events are matched up with the output text. Each sequential
match is removed in the output text so that it's not read by the screen
reader.

### Detecting what to send events for
As with WT, a `UiaEngine` was added to the renderer and it is set up
when a UIA client is detected. WT would normally stop sending events
when focus was lost from the control. We do the same here.

### Automation properties
`TermControlUiaProvider` was upgraded to support property values. Such
properties include class name and control type. These align with those
set in `TermControlAutomationPeer`. Realistically, those should point to
these, but that requires a lot more work and a localization burden
(because we need to move the localized word "terminal").

`HwndTerminalAutomationPeer` takes this a step further and overrides the
class name to be `WPFTermControl`. This allows screen readers to provide
special handling for the `WPFTermControl` vs the UWP term control since
they will be updating at different speeds.

### Build fixes
To build the WPF test app, I had to mess with the dependencies a little
bit. Really just add the atlas engine and uia renderer to the build
steps.

### HwndTerminal initialization
The initialization order with `WM_NCCREATE` was changed to match that of
Windows Terminal (BaseWindow/IslandWindow). This is safer now. I also
removed the `static` window because it was unnecessary.

### Handling `WM_GETOBJECT`
WPF's HwndHost likes to mark the `WM_GETOBJECT` message as handled to
force the usage of the WPF automation peer. We now explicitly mark it as
not handled and don't return an automation peer. This forces the message
to go down to the HwndTerminal where we return terminal's UiaProvider.

### Remove TermControl layer from UIA tree
TermContol (the top-most layer in the UIA tree) would pop up and not do
anything. This PR also overrides the automation peer at that layer and
marks IsContentElement/IsControlElement=false (the equivalent to
AccessibilityView=Raw). This makes the layer only appear in the UIA tree
if you are using the raw view (i.e. you know what you're doing and you
want to see each individual layer even if you can't directly interact
with it).

## Validation Steps Performed
Tested with Narrator/NVDA using WpfTerminalTestNetCore project in our
repo.
- [X] New output is read out (not just key events, but also other output
  text)
- [X] Local echo does not occur (i.e. pressing 'A' should only read 'A'
  once, not twice [key event and rendered letter]).
- [X] selection events are read out properly
- [X] cursor change events are read out properly (tested with text
  cursor indicator preview in Settings App > Accessibility > Text
  Cursor)

NOTE: test this with Release builds. Debug builds may be too slow and
not read out properly

Closes #12642
2022-10-06 23:11:47 +00:00
PankajBhojwani
40bc3d7fbc Implement InitialPosition and CenterOnLaunch in the SUI (#13605)
## Summary of the Pull Request
`InitialPosition` and `CenterOnLaunch` can now be edited in the SUI

## PR Checklist
* [x] Closes #9075 
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx

## Detailed Description of the Pull Request / Additional comments
`InitialPosition` follows the same style as `LaunchSize`, with a number box for the x coordinate and a number box for the y coordinate. When there is no value for either of these coordinates, the respective number box is empty (and displays the text `Undefined`). 

## Validation Steps Performed
They work
2022-10-05 19:37:16 +00:00
Rose
00cdacc96b Update jsoncpp from 1.9.3 to 1.9.5 (#14122) 2022-10-05 16:35:27 +00:00
Kayla Cinnamon
54dc2c4432 Add tooltips to context menus (#14058)
Add tooltips to the tab context menu and the tab dropdown menu.

Closes #13243
2022-09-30 18:04:27 +00:00
Dustin L. Howett
fc0ef37977 Reject illegal paths in OSC 9;9 (#14093)
Paths that contain illegal path components will be dropped
in the dispatcher.
2022-09-27 20:45:58 -05:00
Rose
1da3bc7f1f Use Nuget 6.x (#13937)
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request

Update Nuget used
2022-09-27 19:40:32 +00:00
Leonard Hecker
2de475b36a AtlasEngine: Partially revert glyph scaling changes (#14085)
This change fixes issues with certain fonts that draw _way_ outside the advance
width/height black box and expect to remain centered on the baseline.

## Validation Steps Performed
* Use MesloLGM Nerd Font
* Print U+E0B0
* Ensure it's centered, even if it's cut off 
2022-09-27 18:59:13 +00:00
Rose
c392ade6dd Simplify types (#14071)
Use _v suffix instead of the ::value suffix
2022-09-27 18:58:17 +00:00
Rose
975d767d11 Use using over typedef (#14072) 2022-09-27 18:57:42 +00:00
Rose
4f3a639c19 Use std::ranges to simplify code (#14070)
## Validation Steps Performed
Manual and Automated testing
2022-09-27 18:56:51 +00:00
Mike Griese
e1e6e662f9 Add the Needs-Triage label automatically
if the bot adds it, then the issue will get added to the project before the bot gets a chance to add the triage label. Just start with the triage label.
2022-09-23 08:20:21 -05:00
Leonard Hecker
97dc5c8d75 AtlasEngine: Fix uneven baselines when scaling glyphs (#14039)
This commit changes the glyph scale algorithm to prefer aligning glyphs to
their baseline. This improves the visual appearance of simulated italic glyphs.
However wide Emojis in narrow cells now look slightly worse without centering.

Closes #13987

## Validation Steps Performed
* Use FiraCode which has no italic variant and instead uses simulated italics
* Write italic text
* Baseline is consistent 
2022-09-21 22:30:15 +00:00
Leonard Hecker
274bdb31da Fix potential lags/deadlocks during tab close (#14041)
`ConptyClosePseudoConsole` blocks until OpenConsole exits.
This is problematic for the changes in 666c446, which stopped calling that
function on a background thread to solve a race condition. This commit fixes
the potential lags/deadlocks from waiting on OpenConsole's exit, by adding
`ConptyClosePseudoConsoleNoWait` which only closes the IO handles and allows
OpenConsole to exit naturally. This uncovered another potential deadlock
in `ServiceLocator::RundownAndExit` which might call itself recursively.

Closes #14032

## Validation Steps Performed
* Print tons of text and concurrently close the tab.
  Tab closes, OpenConsole/pwsh exits instantly 
* Use `Enter-VsDevShell` and close the tab.
  Tab closes instantly, OpenConsole/pwsh exits after ~5 seconds 
2022-09-21 22:26:30 +00:00
Dustin L. Howett
5027c8031d OpenHere: Replace explorer window lookup code w/ site lookup (#14048)
When we first introduced the shell extension, it didn't work properly
for some folders (such as the Desktop, or perhaps any "background"
click) due to a bug in Windows. We worked around that bug with the help
of an awesome community member, who contributed code that would pull up
the topmost Explorer window and query its location.

That Windows bug was eventually fixed, but we still had trouble with
items appearing correctly. On Windows 11, the Open in Terminal menu item
appears and disappears at random when you right-click the desktop, but
it always appears when you right-click a folder. It sometimes appears
for Quick Access, even though it shouldn't.

We tried to fix that in #13206, but the fix caused more issues than it
solved. We reverted it for 1.15 and 1.16.

At the end of the day, it turns out that getting the path from the
toplevel explorer window is fragile. Fortunately, the shell does offer
us a way to get that information: the site chain.

This pull request replaces GetPathFromExplorer() with an implementation
of `IObjectWithSite`, which allows us to use the site chain to look up
from whence a context menu request was initiated. It also makes item
lookup generally more robust.

*  Tested on Windows 11
  *  Desktop
  *  Folder Background
  *  Folder Selected
  *  Quick Access (does not appear)
  *  This PC (does not appear)
*  Tested on Windows 10
  *  Desktop
  *  Folder Background
  *  Folder Selected
  *  Quick Access (does not appear)
  *  This PC (does not appear)

References #13206
References #13523
Closes #12578

Co-authored-by: John Lueders <johnlue@microsoft.com>
2022-09-21 12:41:37 -05:00
Steve Otteson
b3c9f01432 Add support for scroll bar 'always' setting (#14047)
This fixes #3454 by adding support for an "always" mode for the scroll bar.

This change uses a custom VisualStateManager to keep the scroll bar from collapsing if the profile is using the 'always' setting.

## Validation Steps Performed
Tried updating settings.json directly and using the UI and making sure the scroll bar behaves as expected.

Closes #3454
2022-09-21 12:24:11 +00:00
Dustin Howett
c0c284fed3 Merged PR 7872414: [Git2Git] Merged PR 7872347: BUILD BREAK FIX: Use the X86 wyhash32 code for ARM32
We're using this in UnicodeStorage!

Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 828282c76d559ae2dbbee4288796a939e7f869f8

Related work items: MSFT-41396187
2022-09-20 21:42:17 +00:00
Leonard Hecker
08096b2343 AtlasEngine: Fix cursor invalidation (#14038)
There's a different behavior regarding cursors between conhost and Windows
Terminal. In case of the latter we don't necessarily call `PaintCursor`
during cursor movement, because the cursor blinker never stops "blinking".

Closes #14028

## Validation Steps Performed
* Enter text until after the line wraps
* Hold backspace until the line unwraps
* No leftover cursor on the second line 
2022-09-20 12:37:03 -05:00
Leonard Hecker
f79276b21b Fix font size rounding in the settings UI (#14040)
This fixes an issue with c51bb3a, where some fractional font
sizes are displayed as something like 13.600000000001.

Closes #14024

## Validation Steps Performed
* Enter a font size of 13.6 and save
* NumberBox displays "13.6" 
2022-09-20 12:36:48 -05:00
James Holderness
1ce22a87e6 Merge the legacy and extended attributes (#14036)
This PR attempts to simplify the `TextAttribute` class by merging the
two fields that were previously storing the "legacy" attributes and the
"extended" attributes separately.

When the `TextAttribute` class is initialized with a legacy value, we
were masking off the `META_ATTRS` bits to store in the `_wAttrLegacy`
field, and then additionally clearing the `COMMON_LVB_SBCSDBCS` bits,
so there were only 5 bits that were actually used in the end. We also
had an additional `_extendedAttrs` field holding other VT attributes,
which only used 8 of its available 16 bits.

In this PR I've now merged the the two sets of attributes into one enum,
so they all fit in a single 16-bit value. The legacy attributes retain
the same bit positions they originally had, so we can mask them off from
an incoming legacy value as we did before. I've just simplified the
process somewhat by creating a `USED_META_ATTRS` mask that covers the
exact subset of meta attributes that we care about.

The new enum that holds the combined attributes has now been named
`CharacterAttributes` rather than `ExtendedAttributes`, since that seems
to be the term typically used in VT documentation. This covers both
rendition/visual attributes and logical attributes (not yet used, but we
will need them at some point to support selective erase operations).

While making these changes I also noticed the `IsLeadingByte` and
`IsTrailingByte` methods weren't actually used anywhere, and weren't
correctly implemented anyway, so I've removed those now.

## Validation Steps Performed

I've manually run a number of attribute test scripts which cover both
legacy and VT operations, and everything still appears to be working
correctly.

Closes #14031
2022-09-20 13:15:20 +00:00
Leonard Hecker
c51bb3a7a6 Add support for fractional font sizes (#14013)
After this commit a user may specify fractional font sizes.
Support was only implemented for AtlasEngine however.
DxEngine continues to use rounded (integer) font sizes.

Closes #6678

## Validation Steps Performed
* Install a bitmap font that requires fractional font sizes
  (e.g. Terminus TTF, https://files.ax86.net/terminus-ttf/)
* Set font size to something integer (e.g. 14pt)
  Glyphs are blurry 
* Set font size to something fractional (e.g. 13.5pt)
  Glyphs are crisp 
2022-09-16 22:37:56 +00:00
Dustin Howett
6567201e0e Merge remote-tracking branch 'openconsole/inbox' into main 2022-09-16 15:34:50 -05:00
Leonard Hecker
bea13bddf1 AtlasEngine: Fix bugs around bitmap font rendering (#14014)
This commit fixes several issues:
* Some fonts set a line-gap even though they behave as if they
  don't want any line-gaps. Since Terminals don't really have
  any gaps anyways, it'll now not be taken into account anymore.
* Center alignment breaks bitmap glyphs which expect left-alignment.
* Automatic "opsz" axis makes Terminus TTF's italic glyphs look quite
  weird. I disabled this feature as we might not need it anyways.

A complete fix depends on #14013
Closes #14006

## Validation Steps Performed
* Use Terminus TTF at 13.5pt
* Print UTF-8-demo.txt
* No gaps between block characters 
2022-09-16 18:54:11 +00:00
Leonard Hecker
81e2bc98d1 Stop DoSing users with renderer errors (#13995)
If a rendering engine constantly throws error we'll effectively
denial-of-service our users by drowning them in warning popups.
This commit fixes the issue by limiting the retries in all cases.

Issue found in: #13985

## Validation Steps Performed
* Add a `THROW_HR(E_INVALIDARG);` in `AtlasEngine::StartPaint()`
* Launch Windows Terminal
* Only one warning popup shows up 
* Rendering is disabled until one clicks "resume" 
2022-09-16 14:17:10 +00:00
Mike Griese
446ef22044 apparently I don't know yaml 2022-09-15 16:17:27 -05:00
Leonard Hecker
16aa79d78d AtlasEngine: Fix a crash when drawing double width rows (#13966)
The `TileHashMap` refresh via `makeNewest()` in `StartPaint()` depends
on us filling the entire `cellGlyphMapping` row with valid data.
This commit makes sure to initialize the `cellGlyphMapping` buffer.
Additionally it clears the rest of the row with whitespace
until proper `LineRendition` support is added.

Closes #13962

## Validation Steps Performed
* vttest's "Test of double-sized characters" stops crashing 
* No weird leftover characters 
2022-09-15 17:01:33 +00:00
Leonard Hecker
e2b2d9b92c AtlasEngine: Properly detect shader model 4 support (#13994)
Direct3D 10.0 and 10.1 only have optional support for shader model 4.
This commit fixes our assumption that it's always present by checking
`ComputeShaders_Plus_RawAndStructuredBuffers_Via_Shader_4_x` first.

Closes #13985

## Validation Steps Performed
* Set feature level to 10.1 via `dxcpl`
* `CheckFeatureSupport` is called and doesn't throw 
2022-09-14 23:27:46 +00:00
Dustin Howett
fba4e227f0 Merged PR 7854069: [Git2Git] Build fixes on top of 704458ee0
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 4024b6933d446a359a35136053da8b4a8f598d9d

Related work items: MSFT-41327033
2022-09-14 21:53:13 +00:00
Mike Griese
2f0a93d9c8 okay that didn't work. Reverting back to LKG 2022-09-14 16:36:32 -05:00
Mike Griese
cf1d4de20b learning 2022-09-14 16:34:25 -05:00
Mike Griese
f70f8308c4 Merge branch 'main' of https://github.com/microsoft/terminal 2022-09-14 16:30:35 -05:00
Mike Griese
cf293ad367 This is a test 2022-09-14 16:30:21 -05:00
Mårten Rånge
b4b6636b49 Relax shader strictness in RELEASE mode (#13998)
Disables strictness and warnings as errors for custom pixel shaders in
RELEASE. Windows terminal is not telling the user why the shader won't
compile which makes it very frustrating for the shader hacker.

After trying the recent preview none of my shaders loaded anymore in
Windows Terminal Preview which made me very sad. I had no idea what was
wrong with them. After cloning the git repo, building it, fighting an
issue that prevent DEBUG SDK from being used I finally was able to
identify some issues that were blocking my shaders.

> error X3556: integer modulus may be much slower, try using uints if possible.
> error X4000: use of potentially uninitialized variable (rayCylinder)

While the first one is a good warning I don't think it is an error and
the tools I use didn't flag it so was hard to know.

The second one I was staring at the code and was unable to identify what
exactly was causing the issues, I fumbled with the code a few times and
just felt the fun drain away.

IMHO: I want it to be fun to develop shaders for windows terminal.
Fighting invisible errors are not fun. I am not after building
production shaders for Windows Terminal, I want some cool effects. So
while I am as a .NET developer always runs with Warning as errors I
don't think it's the right option here. Especially since Windows
Terminal doesn't tell what is the problem.

However, I understand if the shaders you ship with Windows Terminal
should be free of errors and silly mistakes, so I kept the stricter
setting in DEBUG mode.

## Validation Steps Performed

Loaded Windows Terminal in RELEASE and DEBUG mode and validated that
RELEASE mode had reduced strictness but DEBUG retained the previous more
restrictive mode.
2022-09-14 21:28:45 +00:00
Mike Griese
89746adfd7 This is a test of the add-to-project action (#13975)
docs: https://github.com/marketplace/actions/add-to-github-projects?version=v0.3.0

Hey maybe we should use more actions. This was thrown out during the last GH sync. Hopefully this doesn't explode.

This _should_ add all issues that don't have one of `Issue-Feature`, `Needs-Triage`, `Needs-Author-Feedback`, `Issue-Scenario` to the project board. That should just leave all the bugs and tasks that have been triaged.

I didn't go for 

```yml
          labeled: Issue-Task, Issue-Bug
          label-operator: OR
```

since those would include untriaged ones.

There's also no way to filter on milestone currently, so this will likely add icebox issues. We'll need to remove those manually as needed.
2022-09-14 21:11:19 +00:00
Dustin L. Howett
88c6d7ff5b Regenerate CodepointWidthDetector from Unicode 15.0 (#14001)
Closes #13999
2022-09-14 20:56:21 +00:00
Dustin Howett
d21036d313 Merged PR 7847415: [Git2Git] Migrate all GSL Golden Path references to use VCPkg
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 7ea9457533db712ee8e8a5a11e1fbbdfc9430027

Related work items: MSFT:40841395
2022-09-14 18:03:49 +00:00
Leonard Hecker
71fc4b1b0a Replace dependency on boost with a custom small vector (#13716)
This replaces ~70k LOC (parts of boost, 1/4th of the code in this project)
with ~700 LOC (`small_vector.h`). By replacing boost, we simplify future
maintenance and improve compile times.

## Validation Steps Performed
* New and existing unit tests are ok 
* Various common VT applications run fine in debug mode OpenConsole 
2022-09-14 13:57:07 +00:00
Dustin Howett
79ef7477f2 Migrate OSS up to 704458ee0 2022-09-13 16:37:28 -05:00
James Holderness
704458ee0e Pass through soft fonts over conpty (#13965)
This PR introduces a mechanism for passing through downloadable soft
fonts to the conpty client, so that we can support DRCS (Dynamically
Redefinable Character Sets) in Windows Terminal.

Soft fonts were first implemented in conhost (with the GDI renderer) in
PR #10011, and were implemented in the DX renderer in PR #13362.

The way this works is by passing through the `DECDLD` sequence
containing the font definition, but with the character set ID patched to
use a hardcoded value (this is to make sure it's not going to override
the default character set). At the same time we send through an `SCS`
sequence to map this character set into the G1 table so we can easily
activate it.

We still need to process the `DECDLD` sequence locally, though, since
the initial character set mapping take place on the host side. This gets
the DRCS characters into our buffer as PUA Unicode characters. Then when
the VT engine needs to output these characters, it masks them with `7F`
to map them back to ASCII, and outputs an `SO` control to activate the
soft font in the conpty client.

## Validation Steps Performed

I've manually tested with a number of soft fonts and applications that
make use of soft fonts. But if you're testing with the VT320 fonts from
the vt100.net collection, note that you'll need to enable the ISO-2022
coding system first, since they use 8-bit C1 controls.
2022-09-13 00:21:06 +00:00
James Holderness
f2b361c146 Make sure Terminal state machine always accepts C1 controls (#13969)
When we added support for the `DECAC1` control sequence, which
determines whether `C1` controls are accepted or not, the intention was
that conhost would be making that determination, and Windows Terminal
would always be expected to accept any passed-through `C1` controls.

However, this didn't take into account that a passed-through `RIS`
sequence could end up disabling `DECAC1`, and that would leave Windows
Terminal incapable of processing any `C1` controls. This PR attempts to
fix that oversight.

The `DECAC1` sequence was added in PR #11690, when we disabled `C1`
acceptance by default.

This is a bit of a hack, but I've added a new `AlwaysAcceptC1` mode to
the state machine, which is enabled at startup in the Terminal, and is
never disabled. The parser then just needs to check whether either
`AcceptC1` or `AlwaysAcceptC1` are set.

## Validation Steps Performed

I've manually confirmed the test case in #13968 now works as expected.

Closes #13968
2022-09-12 19:11:45 +00:00
James Holderness
3e6abd37df Pass through line rendition attributes over conpty (#13933)
This PR introduces a mechanism for passing through line rendition
attributes to the conpty client, so we can support double-width and
double-height text in Windows Terminal.

Line renditions were first implemented in conhost (with the GDI
renderer) in PR #8664, and were implemented in the DX renderer in PR
#13102.

By default this won't add any additional overhead to the conpty output,
but as soon as there is any usage of double-size text, we switch to a
mode in which every line output will be prefixed with a line rendition
sequence. This is to ensure that the line attributes in the client
terminal are always in sync with the host.

Since this does add some overhead to the conpty output, we'd prefer not
to remain in this mode longer than necessary. So whenever there is a
full repaint of the entire viewport, we check to see if all of the lines
are single-width. If that is the case, we can then safely skip the line
rendition sequences in future updates.

One other small optimization is when the conpty update is only writing
out a single character (this is something we already check for). When
that is the case, we can safely skip the line rendition prefix, because
a single character update should never include a change of the line
rendition.

## Validation Steps Performed

I've manually tested that Windows Terminal now passes the double-size
tests in _Vttest_, and also confirmed various edge cases are working
correctly in my own double-size tests.

Closes #11595
2022-09-09 18:34:30 +00:00
Dustin L. Howett
3958c938af vPack: fix submit branch, add github token from consvc (#13959)
Our Windows branch name changed, and I took this opportunity to resolve
an issue where vpack builds would occasionally fail due to GitHub rate
limiting the Azure DevOps IP addresses.
2022-09-09 13:30:07 -05:00
Dustin Howett
eaf81b8220 version: bump to 1.17 on main 2022-09-09 12:25:13 -05:00
Leonard Hecker
124058f276 AtlasEngine: Fix a correctness bug (#13956)
`ATLAS_POD_OPS` doesn't check for `has_unique_object_representations` and so a
bug exists where `CachedCursorOptions` comparisons invoke undefined behavior.
2022-09-09 18:06:06 +02:00
Mike Griese
c02bb296f5 Fix til::color::layer_over (#13946)
The color of inactive tab text is incorrect since #13689 due to the introduction
of `til::color::layer_over` which incorrectly calculated the RGB values.

## Validation Steps Performed
* Added unit tests 

Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
2022-09-09 14:00:25 +00:00
Leonard Hecker
37c159abba Reduce amount of telemetry events (#13951)
This commit reduces the amount of telemetry during general usage by about half.
8 events that weren't really used anymore were removed.
1 new event was added ("AppInitialized") which will help us investigate #5907.
During review 9 events were found that were incorrectly tagged as perf. data.

## Validation Steps Performed
* Launch Windows Terminal
* The "latency" field "AppInitialized" matches the approx. launch time 
2022-09-09 13:57:49 +00:00
Mike Griese
95a9d8c31b Fix conhost crashing on --headless without --signal (#13950)
It's not supported, and it shouldn't be. 

But this is the absolutely most minimal way to get the crash to go away. 

Closes #13914
2022-09-08 23:23:28 +00:00
Dustin L. Howett
e682cdad5e Disable RTTI on TerminalApp and friends (#13947)
When Leonard updated CLI11 in #12658, he imported a version that no
longer requires RTTI. Since CLI11 was the only reason we had enabled
RTTI in any of our projects, we're finally able to turn it off.

|        | TerminalApp.dll | MSIX Package |
| ------ | ---------------:| ------------:|
| Before |         3180KiB |      6545KiB |
| After  |         1970KiB |      6426KiB |
| Delta  |    **-1210KiB** |  **-119KiB** |
2022-09-08 16:40:10 -05:00
Leonard Hecker
6816620a6d AtlasEngine: Remove experimental tag and add tracing (#13939)
With AtlasEngine being enabled by default in 1.16 Preview it would look weird
if the `useAtlasEngine` option would still be called "experimental".
Additionally we're interested in how many users opt out of useAtlasEngine,
indicating major issues that would require us to disable it by default again.

Related to #13936

## Validation Steps Performed
* Toggling `useAtlasEngine` works as expected 
* Observe new event with TVPP 
2022-09-08 19:21:52 +00:00
Carlos Zamora
1ef4a42762 Polish MarkMode interactions with ExpandSelectionToWord and existing selection (#13893)
- fix: if a selection exists, mark mode should promote the existing selection instead of creating one at the cursor
- fix: mark mode --> move to middle of a word --> ExpandSelectionToWord --> Shift+Right/Left had some weird behavior. Fix that
- fix: Ctrl+enter on random selection clears selection. It should try to treat selection as a URL.

## References
#13854

NOTE: 3b53f3c can be serviced
2022-09-07 16:07:52 +00:00
Sergey
2c341c8deb Use the tab's active title for Export Text (#13915)
Takes title from the tab instead of the TermControl

Closes #13909
2022-09-07 15:50:36 +00:00
Leonard Hecker
666c446bc3 Fix a ControlCore race condition on connection close (#13882)
As noted by the `winrt::event` documentation:
> [...] But for asynchronous events, even after revoking [...], an in-flight
> event might reach your object after it has started destructing.

This is because while adding/removing/calling event handlers might be
thread-safe, there's no guarantee that they run mutually exclusive.

This commit fixes the issue by reverting 6f0f245. Since we never checked
the result of closing a terminal connection anyways, this commit simply drops
the wait on the connection being teared down to ensure #1996 doesn't regress.

Closes #13880

## Validation Steps Performed
* Open tab, close tab, open tab, close tab, open tab, close tab
  * ConPTY 
  * Azure 
* Closing a tab with a huge amount of panes 
* Opening a bunch of tabs and then closing the window 
* Closing a tab while it's busy with VT 
* `wtd -w 0 nt cmd /c exit` 
* `wtd -w -1 cmd /c exit`
  * No WerFault spawns 
2022-09-06 21:36:59 +00:00
James Holderness
276405a476 Add support for DECBKM (Backarrow Key Mode) (#13894)
This PR adds support for the `DECBKM` sequence, which provides a way for
applications to specify whether the `Backspace` key should generate a
`BS` character or a `DEL` character.

On the original VT100 terminals, the `Backarrow` key generated a `BS`,
and there was a separate `Delete` key that generated `DEL`. However, on
the VT220 and later, there was only the `Backarrow` key. By default it
generated `DEL`, but from the VT320 onwards there was an option to make
it generate `BS`, and the `DECBKM` sequence provided a way to control
that behavior programmatically.

On modern terminals, the `Backspace` key serves as the equivalent of the
VT `Backarrow`, and typically generates `DEL`, while `Ctrl`+`Backspace`
generates `BS`. When `DECBKM` is enabled (for those that support it),
that behavior is reversed, i.e. `Backspace` generates `BS` and
`Ctrl`+`Backspace` generates `DEL`.

This PR also gets the other `Backspace` modifiers more closely aligned
with the expected behavior for modern terminals. The `Shift` modifier
typically has no effect, and the `Alt` modifier typically prefixes the
generated sequence with an `ESC` character.

While not strictly related to `DECBKM`, I noticed while testing that the
`_SetInputMode` method was doing unnecessary work that was specific to
the `FocusEvent` mode. I've now moved that additional processing into
the `EnableFocusEventMode` method, which I think makes things somewhat
simpler.

## Validation Steps Performed

I've tested the basic `DECBKM` functionality in Vttest, and I've
manually tested all the modifier key combinations to make sure they
match what most modern terminals generate.

I've also added a unit test that confirms that the expected sequences
are generated correctly when the `DECBKM` mode is toggled.

Closes #13884
2022-09-06 18:23:54 +00:00
Leonard Hecker
813286c523 AtlasEngine: Fix various bugs found in testing (#13906)
In testing the following issues were found in AtlasEngine and fixed:
1. "Toggle terminal visual effects" action not working
2. `d2dMode` failed to work with transparent backgrounds
3. `GetSwapChainHandle()` is thread-unsafe due to it being called outside
  of the console lock and with single-threaded Direct2D enabled
4. 2 swap chain buffers are less performant than 3
5. Flip-Discard and `Present()` is less energy efficient than
  Flip-Sequential and `Present1()`
6. `d2dMode` used to copy the front to back buffer for partial rendering,
  but always redraw the entire dirty region anyways
7. Added support for DirectX 9 hardware
8. If custom shaders are used not all pixels would be presented

Closes #13906

## Validation Steps Performed
1. Toggling visual effects runs retro shader 
   With a custom shader set, it toggles the shader 
   Toggling `experimental.rendering.software` toggles the shader 
2. `"backgroundImage": "desktopWallpaper"` works with D2D  and D3D 
3. Adding a `Sleep(3000)` in `_AttachDxgiSwapChainToXaml` doesn't break
   Windows 10  nor Windows 11 
4. Screen animations run at 144 FPS  even while moving the window 
5. No weird artefacts during cursor movement or scrolling 
6. No weird artefacts during cursor movement or scrolling 
7. Forcing DirectX 9.3 in `dxcpl` runs fine 
2022-09-02 22:10:09 +00:00
Carlos Zamora
bfd5248a2e Revert "Remove most uses of CompareInBounds (#13244)" (#13907)
This reverts commit f785168aac (PR #13244)

The error logged to NVDA was caused by the following line of code in `_getTextValue()`:
`THROW_HR_IF(E_FAIL, !bufferSize.IsInBounds(_start) || !bufferSize.IsInBounds(_end));`
NVDA would expand a text range to encompass the document in the alt buffer. This means that the "end" would be set to the dangling "endExclusive" point (x = left, y = one past the end of the buffer). This is a valid range!
However, upon extracting the text, we would hit the code above. The exclusive end doesn't actually point to anything in the buffer, so we would falsly throw `E_FAIL`.

Though this could be fixed by adding a special check for the `endExclusive` in the line above, I suspect there are other places throughout the UIA code that hit this problem too. The safest course of action is to revert this commit entirely since it was a code health commit (it doesn't actually close an issue).

Closes #13866
2022-09-02 21:25:09 +00:00
Mike Griese
fe0d57071e An attempted fix for the SignalTextChanged crash (#13876)
This is conjecture - I was totally unable to repro the original crash here.
Based on the stacks in MSFT:39994969, it looks like we try to fire off a
`RaiseAutomationEvent`, which calls through UIA core, eventually to the point of
calling `ComPtr<WUX::Automation::Peers::IAutomationPeer>::{dtor}`. I'm guessing
based on the stacks that the TermControl has already been released and cleaned
up. However, the lambda in the `RunAsync` calls here only takes a ref to the
TCAP. The TCAP has an outstanding reference (maybe on the other side of the UIA
fence), and gets successfully resolved as strong, but when calling to
`RaiseAutomationEvent`, the `owner` we passed in is gonezo.

This explicitly passes a `weak_ref` to `TermControlAutomationPeer`, rather than
a raw ptr, so we can actually check if the control is still alive before _we_
dereference it. If it is, great, we've got a strong ref to it now and it won't
get torn down.

Again, this is hearsay. Without a repro, the only way we can confirm this is
gone is by just hoping the crashes go away. 🤞

* Might close #13357 (we'll reopen if it doesn't?)
* narrator still works
2022-09-02 10:51:59 +00:00
Carlos Zamora
284d0456ae Fix crash on save in rejuv'd Color Schemes page (#13902)
## Summary of the Pull Request
Fix a bug where if you pressed the "Save" button, WT would crash. This was caused by adding the possibility that no color scheme is selected in the main page. With no "current scheme", attempting to get its "name" would cause a null ptr exception.

The fix is simple: just check if we actually have a current scheme.
Bonus points: if we don't have a current scheme, don't bother looking throught the color schemes for a match because we'll never find one.


## References
#13269 - Color Schemes Rejuv
2022-09-01 20:40:37 +00:00
Dustin L. Howett
fecccaa257 atlas: only enable continuous redraw if the shader needs it (#13903)
We do this by detecting whether the shader is using variable 0 in
constant buffer 0 (typically "time", but it can go by many names.)

Closes #13901
2022-09-01 19:30:35 +00:00
Mike Griese
81ac9765fc Remove the 1px gap under inactive tabs (#13897)
As noted in https://github.com/microsoft/microsoft-ui-xaml/issues/7674#issuecomment-1234088616

Screenshot below.

* [x] Closes a single element of #13725
2022-09-01 17:25:14 +00:00
Dustin Howett
0973aeab15 Merged PR 7705347: Add stubs to Terminal for OneCoreSafe*, fix the ConIoSrv header
This is required for us to build out of the Terminal repo.

Related work items: MSFT-40435912
2022-08-10 23:18:27 +00:00
Dustin Howett
a94e508010 Merged PR 7705187: [Git2Git] Merged PR 7693103: Reintroduce OneCore redirects for MapVKeyW/VkKeyScanW/GetKeyState
This pull request reintroduces aliases for `VkKeyScanW`,
`MapVirtualKeyW` and `GetKeyState` that redirect through ConIoSrv on
OneCore devices.

We made an assertion in PR !7096375 that those APIs were hosted in an
extension APIset that was present on all OneCore devices. It turned out
that this was _incorrect_: that APIset extension is only hosted on
OneCoreUAP and above.

This would not be a problem save for NanoServer. NanoServer is built on
top of OneCore.

As Nano is a container host OS, it is primarily interfaced vith via
ConPTY... which exercises the VkKeyScanW/MapVirtualKeyW codepaths quite
a bit. Those APIs started returning invalid data, which caused us to
convert all incoming keyboard events into numpad events. This didn't
prove to be an issue for CMD or PowerShell (weirdly,) but it did prove
to be an issue for Redis. Unfortunately, Redis is exactly the sort of
thing you might want to run in a container.

Reintroducing these aliases was complicated because we took the
opportunity to remove all of IInputServices (!7105348), which was a
wrapper around some code that would choose Win32 or OneCore depending on
the runtime environment.

I made the choice (with the help of Leonard Hecker) to reimplement these
functions in a different way: always call the delay-loaded version, and
then on OneCore editions check the return value and error code to ssee
if we hit a delay load failure. It incurs a minor cost, but all of the
delay loads are in-proc and do not require us to make a syscall, so that
cost is negligible.

Part of this new implementation requires us to change _all conhost
internal callers_ to use "OneCoreSafe" versions of those APIs. We can't
redirect the user32 versions out of the way and usurp their import
symbols, so this commit also introduces some warning defines. If you use
VkKeyScanW (and friends), you _should_ get a linker error. Assuming
HostAndPropsheetIncludes has been included. It very well may not have
been included.

Fixes MSFT-40435912
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 949e8dfc07f122520c6a74412329a6f7e77d19c5
2022-08-10 21:14:52 +00:00
896 changed files with 10454 additions and 126765 deletions

View File

@@ -3,7 +3,7 @@
"isRoot": true,
"tools": {
"XamlStyler.Console": {
"version": "3.2008.4",
"version": "3.2206.4",
"commands": [
"xstyler"
]

15
.git-blame-ignore-revs Normal file
View File

@@ -0,0 +1,15 @@
# Commits mentioned in this file will automatically
# be skipped by GitHub's blame view.
# To use it with "git", run
# > git blame --ignore-revs-file ./.git-blame-ignore-revs
# Reformatted the entire codebase
9b92986b49bed8cc41fde4d6ef080921c41e6d9e
# Line Endings changes
cb7a76d96c92aa9fc7b03f69148fb0c75dff191d
5bbf61af8c8f12e6c05d07a696bf7d411b330a67
d07546a6fef73fa4e1fb1c2f01535843d1fcc212
# UTF-8 BOM changes
ddae2a1d49d604487d3c963e5eacbeb73861d986

View File

@@ -1,6 +1,6 @@
name: "Bug report 🐛"
description: Report errors or unexpected behavior
labels: [Issue-Bug]
labels: [Issue-Bug, Needs-Triage]
body:
- type: markdown
attributes:
@@ -14,7 +14,7 @@ body:
label: Windows Terminal version
placeholder: "1.7.3651.0"
description: |
You can find the version in the about dialog, or by running `wt -v` at the commandline.
You can copy the version number from the About dialog. Open the About dialog by opening the menu with the "V" button (to the right of the "+" button that opens a new tab) and choosing About from the end of the list.
validations:
required: false

View File

@@ -6,6 +6,7 @@ File | Purpose | Format | Info
[reject.txt](reject.txt) | Remove words from the dictionary (after allow) | grep pattern matching whole dictionary words | [reject](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-reject)
[excludes.txt](excludes.txt) | Files to ignore entirely | perl regular expression | [excludes](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-excludes)
[patterns/*.txt](patterns/) | Patterns to ignore from checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
[candidate.patterns](candidate.patterns) | Patterns that might be worth adding to [patterns.txt](patterns.txt) | perl regular expression with optional comment block introductions (all matches will be suggested) | [candidates](https://github.com/check-spelling/check-spelling/wiki/Feature:-Suggest-patterns)
[line_forbidden.patterns](line_forbidden.patterns) | Patterns to flag in checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
[expect/*.txt](expect.txt) | Expected words that aren't in the dictionary | one word per line (sorted, alphabetically) | [expect](https://github.com/check-spelling/check-spelling/wiki/Configuration#expect)
[advice.md](advice.md) | Supplement for GitHub comment when unrecognized words are found | GitHub Markdown | [advice](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice)

View File

@@ -21,7 +21,7 @@ See the `README.md` in each directory for more information.
:microscope: You can test your commits **without** *appending* to a PR by creating a new branch with that extra change and pushing it to your fork. The [check-spelling](https://github.com/marketplace/actions/check-spelling) action will run in response to your **push** -- it doesn't require an open pull request. By using such a branch, you can limit the number of typos your peers see you make. :wink:
<details><summary>:clamp: If the flagged items are false positives</summary>
<details><summary>If the flagged items are :exploding_head: false positives</summary>
If items relate to a ...
* binary file (or some other file you wouldn't want to check at all).

View File

@@ -1,7 +1,7 @@
admins
allcolors
apc
Apc
apc
breadcrumb
breadcrumbs
bsd
@@ -14,8 +14,8 @@ CMMI
copyable
cybersecurity
dalet
dcs
Dcs
dcs
dialytika
dje
downside
@@ -34,10 +34,12 @@ gantt
gcc
geeksforgeeks
ghe
github
gje
godbolt
hostname
hostnames
https
hyperlink
hyperlinking
hyperlinks
@@ -54,9 +56,11 @@ Llast
llvm
Lmid
locl
lol
lorem
Lorigin
maxed
minimalistic
mkmk
mnt
mru
@@ -80,6 +84,7 @@ runtimes
shcha
slnt
Sos
ssh
timeline
timelines
timestamped
@@ -88,6 +93,7 @@ tokenizes
tonos
toolset
tshe
ubuntu
uiatextrange
UIs
und
@@ -96,5 +102,7 @@ versioned
vsdevcmd
We'd
wildcards
XBox
YBox
yeru
zhe

View File

@@ -32,10 +32,10 @@ DERR
dlldata
DNE
DONTADDTORECENT
DWMWA
DWORDLONG
DWMSBT
DWMWA
DWMWA
DWORDLONG
endfor
ENDSESSION
enumset
@@ -110,8 +110,8 @@ memchr
memicmp
MENUCOMMAND
MENUDATA
MENUITEMINFOW
MENUINFO
MENUITEMINFOW
mmeapi
MOUSELEAVE
mov
@@ -158,8 +158,8 @@ rcx
REGCLS
RETURNCMD
rfind
roundf
ROOTOWNER
roundf
RSHIFT
SACL
schandle
@@ -211,6 +211,7 @@ UPDATEINIFILE
userenv
USEROBJECTFLAGS
Viewbox
virtualalloc
wcsstr
wcstoui
winmain

View File

@@ -0,0 +1,523 @@
# marker to ignore all code on line
^.*/\* #no-spell-check-line \*/.*$
# marker for ignoring a comment to the end of the line
// #no-spell-check.*$
# patch hunk comments
^\@\@ -\d+(?:,\d+|) \+\d+(?:,\d+|) \@\@ .*
# git index header
index [0-9a-z]{7,40}\.\.[0-9a-z]{7,40}
# cid urls
(['"])cid:.*?\g{-1}
# data url in parens
\(data:[^)]*?(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})[^)]*\)
# data url in quotes
([`'"])data:.*?(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,}).*\g{-1}
# data url
data:[-a-zA-Z=;:/0-9+]*,\S*
# mailto urls
mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
# magnet urls
magnet:[?=:\w]+
# magnet urls
"magnet:[^"]+"
# obs:
"obs:[^"]*"
# The `\b` here means a break, it's the fancy way to handle urls, but it makes things harder to read
# In this examples content, I'm using a number of different ways to match things to show various approaches
# asciinema
\basciinema\.org/a/[0-9a-zA-Z]+
# apple
\bdeveloper\.apple\.com/[-\w?=/]+
# Apple music
\bembed\.music\.apple\.com/fr/playlist/usr-share/[-\w.]+
# appveyor api
\bci\.appveyor\.com/api/projects/status/[0-9a-z]+
# appveyor project
\bci\.appveyor\.com/project/(?:[^/\s"]*/){2}builds?/\d+/job/[0-9a-z]+
# Amazon
# Amazon
\bamazon\.com/[-\w]+/(?:dp/[0-9A-Z]+|)
# AWS S3
\b\w*\.s3[^.]*\.amazonaws\.com/[-\w/&#%_?:=]*
# AWS execute-api
\b[0-9a-z]{10}\.execute-api\.[-0-9a-z]+\.amazonaws\.com\b
# AWS ELB
\b\w+\.[-0-9a-z]+\.elb\.amazonaws\.com\b
# AWS SNS
\bsns\.[-0-9a-z]+.amazonaws\.com/[-\w/&#%_?:=]*
# AWS VPC
vpc-\w+
# While you could try to match `http://` and `https://` by using `s?` in `https?://`, sometimes there
# YouTube url
\b(?:(?:www\.|)youtube\.com|youtu.be)/(?:channel/|embed/|user/|playlist\?list=|watch\?v=|v/|)[-a-zA-Z0-9?&=_%]*
# YouTube music
\bmusic\.youtube\.com/youtubei/v1/browse(?:[?&]\w+=[-a-zA-Z0-9?&=_]*)
# YouTube tag
<\s*youtube\s+id=['"][-a-zA-Z0-9?_]*['"]
# YouTube image
\bimg\.youtube\.com/vi/[-a-zA-Z0-9?&=_]*
# Google Accounts
\baccounts.google.com/[-_/?=.:;+%&0-9a-zA-Z]*
# Google Analytics
\bgoogle-analytics\.com/collect.[-0-9a-zA-Z?%=&_.~]*
# Google APIs
\bgoogleapis\.(?:com|dev)/[a-z]+/(?:v\d+/|)[a-z]+/[-@:./?=\w+|&]+
# Google Storage
\b[-a-zA-Z0-9.]*\bstorage\d*\.googleapis\.com(?:/\S*|)
# Google Calendar
\bcalendar\.google\.com/calendar(?:/u/\d+|)/embed\?src=[@./?=\w&%]+
\w+\@group\.calendar\.google\.com\b
# Google DataStudio
\bdatastudio\.google\.com/(?:(?:c/|)u/\d+/|)(?:embed/|)(?:open|reporting|datasources|s)/[-0-9a-zA-Z]+(?:/page/[-0-9a-zA-Z]+|)
# The leading `/` here is as opposed to the `\b` above
# ... a short way to match `https://` or `http://` since most urls have one of those prefixes
# Google Docs
/docs\.google\.com/[a-z]+/(?:ccc\?key=\w+|(?:u/\d+|d/(?:e/|)[0-9a-zA-Z_-]+/)?(?:edit\?[-\w=#.]*|/\?[\w=&]*|))
# Google Drive
\bdrive\.google\.com/(?:file/d/|open)[-0-9a-zA-Z_?=]*
# Google Groups
\bgroups\.google\.com/(?:(?:forum/#!|d/)(?:msg|topics?|searchin)|a)/[^/\s"]+/[-a-zA-Z0-9$]+(?:/[-a-zA-Z0-9]+)*
# Google Maps
\bmaps\.google\.com/maps\?[\w&;=]*
# Google themes
themes\.googleusercontent\.com/static/fonts/[^/\s"]+/v\d+/[^.]+.
# Google CDN
\bclients2\.google(?:usercontent|)\.com[-0-9a-zA-Z/.]*
# Goo.gl
/goo\.gl/[a-zA-Z0-9]+
# Google Chrome Store
\bchrome\.google\.com/webstore/detail/[-\w]*(?:/\w*|)
# Google Books
\bgoogle\.(?:\w{2,4})/books(?:/\w+)*\?[-\w\d=&#.]*
# Google Fonts
\bfonts\.(?:googleapis|gstatic)\.com/[-/?=:;+&0-9a-zA-Z]*
# Google Forms
\bforms\.gle/\w+
# Google Scholar
\bscholar\.google\.com/citations\?user=[A-Za-z0-9_]+
# Google Colab Research Drive
\bcolab\.research\.google\.com/drive/[-0-9a-zA-Z_?=]*
# GitHub SHAs (api)
\bapi.github\.com/repos(?:/[^/\s"]+){3}/[0-9a-f]+\b
# GitHub SHAs (markdown)
(?:\[`?[0-9a-f]+`?\]\(https:/|)/(?:www\.|)github\.com(?:/[^/\s"]+){2,}(?:/[^/\s")]+)(?:[0-9a-f]+(?:[-0-9a-zA-Z/#.]*|)\b|)
# GitHub SHAs
\bgithub\.com(?:/[^/\s"]+){2}[@#][0-9a-f]+\b
# GitHub wiki
\bgithub\.com/(?:[^/]+/){2}wiki/(?:(?:[^/]+/|)_history|[^/]+(?:/_compare|)/[0-9a-f.]{40,})\b
# githubusercontent
/[-a-z0-9]+\.githubusercontent\.com/[-a-zA-Z0-9?&=_\/.]*
# githubassets
\bgithubassets.com/[0-9a-f]+(?:[-/\w.]+)
# gist github
\bgist\.github\.com/[^/\s"]+/[0-9a-f]+
# git.io
\bgit\.io/[0-9a-zA-Z]+
# GitHub JSON
"node_id": "[-a-zA-Z=;:/0-9+]*"
# Contributor
\[[^\]]+\]\(https://github\.com/[^/\s"]+\)
# GHSA
GHSA(?:-[0-9a-z]{4}){3}
# GitLab commit
\bgitlab\.[^/\s"]*/\S+/\S+/commit/[0-9a-f]{7,16}#[0-9a-f]{40}\b
# GitLab merge requests
\bgitlab\.[^/\s"]*/\S+/\S+/-/merge_requests/\d+/diffs#[0-9a-f]{40}\b
# GitLab uploads
\bgitlab\.[^/\s"]*/uploads/[-a-zA-Z=;:/0-9+]*
# GitLab commits
\bgitlab\.[^/\s"]*/(?:[^/\s"]+/){2}commits?/[0-9a-f]+\b
# binanace
accounts.binance.com/[a-z/]*oauth/authorize\?[-0-9a-zA-Z&%]*
# bitbucket diff
\bapi\.bitbucket\.org/\d+\.\d+/repositories/(?:[^/\s"]+/){2}diff(?:stat|)(?:/[^/\s"]+){2}:[0-9a-f]+
# bitbucket repositories commits
\bapi\.bitbucket\.org/\d+\.\d+/repositories/(?:[^/\s"]+/){2}commits?/[0-9a-f]+
# bitbucket commits
\bbitbucket\.org/(?:[^/\s"]+/){2}commits?/[0-9a-f]+
# bit.ly
\bbit\.ly/\w+
# bitrise
\bapp\.bitrise\.io/app/[0-9a-f]*/[\w.?=&]*
# bootstrapcdn.com
\bbootstrapcdn\.com/[-./\w]+
# cdn.cloudflare.com
\bcdnjs\.cloudflare\.com/[./\w]+
# circleci
\bcircleci\.com/gh(?:/[^/\s"]+){1,5}.[a-z]+\?[-0-9a-zA-Z=&]+
# gitter
\bgitter\.im(?:/[^/\s"]+){2}\?at=[0-9a-f]+
# gravatar
\bgravatar\.com/avatar/[0-9a-f]+
# ibm
[a-z.]*ibm\.com/[-_#=:%!?~.\\/\d\w]*
# imgur
\bimgur\.com/[^.]+
# Internet Archive
\barchive\.org/web/\d+/(?:[-\w.?,'/\\+&%$#_:]*)
# discord
/discord(?:app\.com|\.gg)/(?:invite/)?[a-zA-Z0-9]{7,}
# Disqus
\bdisqus\.com/[-\w/%.()!?&=_]*
# medium link
\blink\.medium\.com/[a-zA-Z0-9]+
# medium
\bmedium\.com/\@?[^/\s"]+/[-\w]+
# microsoft
\b(?:https?://|)(?:(?:download\.visualstudio|docs|msdn2?|research)\.microsoft|blogs\.msdn)\.com/[-_a-zA-Z0-9()=./%]*
# powerbi
\bapp\.powerbi\.com/reportEmbed/[^"' ]*
# vs devops
\bvisualstudio.com(?::443|)/[-\w/?=%&.]*
# microsoft store
\bmicrosoft\.com/store/apps/\w+
# mvnrepository.com
\bmvnrepository\.com/[-0-9a-z./]+
# now.sh
/[0-9a-z-.]+\.now\.sh\b
# oracle
\bdocs\.oracle\.com/[-0-9a-zA-Z./_?#&=]*
# chromatic.com
/\S+.chromatic.com\S*[")]
# codacy
\bapi\.codacy\.com/project/badge/Grade/[0-9a-f]+
# compai
\bcompai\.pub/v1/png/[0-9a-f]+
# mailgun api
\.api\.mailgun\.net/v3/domains/[0-9a-z]+\.mailgun.org/messages/[0-9a-zA-Z=@]*
# mailgun
\b[0-9a-z]+.mailgun.org
# /message-id/
/message-id/[-\w@./%]+
# Reddit
\breddit\.com/r/[/\w_]*
# requestb.in
\brequestb\.in/[0-9a-z]+
# sched
\b[a-z0-9]+\.sched\.com\b
# Slack url
slack://[a-zA-Z0-9?&=]+
# Slack
\bslack\.com/[-0-9a-zA-Z/_~?&=.]*
# Slack edge
\bslack-edge\.com/[-a-zA-Z0-9?&=%./]+
# Slack images
\bslack-imgs\.com/[-a-zA-Z0-9?&=%.]+
# shields.io
\bshields\.io/[-\w/%?=&.:+;,]*
# stackexchange -- https://stackexchange.com/feeds/sites
\b(?:askubuntu|serverfault|stack(?:exchange|overflow)|superuser).com/(?:questions/\w+/[-\w]+|a/)
# Sentry
[0-9a-f]{32}\@o\d+\.ingest\.sentry\.io\b
# Twitter markdown
\[\@[^[/\]:]*?\]\(https://twitter.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)\)
# Twitter hashtag
\btwitter\.com/hashtag/[\w?_=&]*
# Twitter status
\btwitter\.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)
# Twitter profile images
\btwimg\.com/profile_images/[_\w./]*
# Twitter media
\btwimg\.com/media/[-_\w./?=]*
# Twitter link shortened
\bt\.co/\w+
# facebook
\bfburl\.com/[0-9a-z_]+
# facebook CDN
\bfbcdn\.net/[\w/.,]*
# facebook watch
\bfb\.watch/[0-9A-Za-z]+
# dropbox
\bdropbox\.com/sh?/[^/\s"]+/[-0-9A-Za-z_.%?=&;]+
# ipfs protocol
ipfs://[0-9a-z]*
# ipfs url
/ipfs/[0-9a-z]*
# w3
\bw3\.org/[-0-9a-zA-Z/#.]+
# loom
\bloom\.com/embed/[0-9a-f]+
# regex101
\bregex101\.com/r/[^/\s"]+/\d+
# figma
\bfigma\.com/file(?:/[0-9a-zA-Z]+/)+
# freecodecamp.org
\bfreecodecamp\.org/[-\w/.]+
# image.tmdb.org
\bimage\.tmdb\.org/[/\w.]+
# mermaid
\bmermaid\.ink/img/[-\w]+|\bmermaid-js\.github\.io/mermaid-live-editor/#/edit/[-\w]+
# Wikipedia
\ben\.wikipedia\.org/wiki/[-\w%.#]+
# gitweb
[^"\s]+/gitweb/\S+;h=[0-9a-f]+
# HyperKitty lists
/archives/list/[^@/]+\@[^/\s"]*/message/[^/\s"]*/
# lists
/thread\.html/[^"\s]+
# list-management
\blist-manage\.com/subscribe(?:[?&](?:u|id)=[0-9a-f]+)+
# kubectl.kubernetes.io/last-applied-configuration
"kubectl.kubernetes.io/last-applied-configuration": ".*"
# pgp
\bgnupg\.net/pks/lookup[?&=0-9a-zA-Z]*
# Spotify
\bopen\.spotify\.com/embed/playlist/\w+
# Mastodon
\bmastodon\.[-a-z.]*/(?:media/|\@)[?&=0-9a-zA-Z_]*
# scastie
\bscastie\.scala-lang\.org/[^/]+/\w+
# images.unsplash.com
\bimages\.unsplash\.com/(?:(?:flagged|reserve)/|)[-\w./%?=%&.;]+
# pastebin
\bpastebin\.com/[\w/]+
# heroku
\b\w+\.heroku\.com/source/archive/\w+
# quip
\b\w+\.quip\.com/\w+(?:(?:#|/issues/)\w+)?
# badgen.net
\bbadgen\.net/badge/[^")\]'\s]+
# statuspage.io
\w+\.statuspage\.io\b
# media.giphy.com
\bmedia\.giphy\.com/media/[^/]+/[\w.?&=]+
# tinyurl
\btinyurl\.com/\w+
# getopts
\bgetopts\s+(?:"[^"]+"|'[^']+')
# ANSI color codes
(?:\\(?:u00|x)1b|\x1b)\[\d+(?:;\d+|)m
# URL escaped characters
\%[0-9A-F][A-F]
# IPv6
\b(?:[0-9a-fA-F]{0,4}:){3,7}[0-9a-fA-F]{0,4}\b
# c99 hex digits (not the full format, just one I've seen)
0x[0-9a-fA-F](?:\.[0-9a-fA-F]*|)[pP]
# Punycode
\bxn--[-0-9a-z]+
# sha
sha\d+:[0-9]*[a-f]{3,}[0-9a-f]*
# sha-... -- uses a fancy capture
(['"]|&quot;)[0-9a-f]{40,}\g{-1}
# hex runs
\b[0-9a-fA-F]{16,}\b
# hex in url queries
=[0-9a-fA-F]*?(?:[A-F]{3,}|[a-f]{3,})[0-9a-fA-F]*?&
# ssh
(?:ssh-\S+|-nistp256) [-a-zA-Z=;:/0-9+]{12,}
# PGP
\b(?:[0-9A-F]{4} ){9}[0-9A-F]{4}\b
# GPG keys
\b(?:[0-9A-F]{4} ){5}(?: [0-9A-F]{4}){5}\b
# Well known gpg keys
.well-known/openpgpkey/[\w./]+
# uuid:
\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
# hex digits including css/html color classes:
(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|u\d+)\b
# integrity
integrity="sha\d+-[-a-zA-Z=;:/0-9+]{40,}"
# https://www.gnu.org/software/groff/manual/groff.html
# man troff content
\\f[BCIPR]
# '
\\\(aq
# .desktop mime types
^MimeTypes?=.*$
# .desktop localized entries
^[A-Z][a-z]+\[[a-z]+\]=.*$
# Localized .desktop content
Name\[[^\]]+\]=.*
# IServiceProvider
\bI(?=(?:[A-Z][a-z]{2,})+\b)
# crypt
"\$2[ayb]\$.{56}"
# scrypt / argon
\$(?:scrypt|argon\d+[di]*)\$\S+
# Input to GitHub JSON
content: "[-a-zA-Z=;:/0-9+]*="
# Python stringprefix / binaryprefix
# Note that there's a high false positive rate, remove the `?=` and search for the regex to see if the matches seem like reasonable strings
(?<!')\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
# Regular expressions for (P|p)assword
\([A-Z]\|[a-z]\)[a-z]+
# JavaScript regular expressions
# javascript test regex
/.*/[gim]*\.test\(
# javascript match regex
\.match\(/[^/\s"]*/[gim]*\s*
# javascript match regex
\.match\(/\\[b].*?/[gim]*\s*\)(?:;|$)
# javascript regex
^\s*/\\[b].*/[gim]*\s*(?:\)(?:;|$)|,$)
# javascript replace regex
\.replace\(/[^/\s"]*/[gim]*\s*,
# Go regular expressions
regexp?\.MustCompile\(`[^`]*`\)
# sed regular expressions
sed 's/(?:[^/]*?[a-zA-Z]{3,}[^/]*?/){2}
# go install
go install(?:\s+[a-z]+\.[-@\w/.]+)+
# kubernetes pod status lists
# https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-phase
\w+(?:-\w+)+\s+\d+/\d+\s+(?:Running|Pending|Succeeded|Failed|Unknown)\s+
# kubectl - pods in CrashLoopBackOff
\w+-[0-9a-f]+-\w+\s+\d+/\d+\s+CrashLoopBackOff\s+
# kubernetes object suffix
-[0-9a-f]{10}-\w{5}\s
# posthog secrets
posthog\.init\((['"])phc_[^"',]+\g{-1},
# xcode
# xcodeproject scenes
(?:Controller|ID|id)="\w{3}-\w{2}-\w{3}"
# xcode api botches
customObjectInstantitationMethod
# font awesome classes
\.fa-[-a-z0-9]+
# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
# grep '^[^#].*lorem' .github/actions/spelling/patterns.txt|perl -pne 's/.*i..\?://;s/\).*//' |tr '|' "\n"|sort -f |xargs -n1 ge|perl -pne 's/^[^:]*://'|sort -u|w|sed -e 's/ .*//'|w|review -
# Warning, while `(?i)` is very neat and fancy, if you have some binary files that aren't proper unicode, you might run into:
## Operation "substitution (s///)" returns its argument for non-Unicode code point 0x1C19AE (the code point will vary).
## You could manually change `(?i)X...` to use `[Xx]...`
## or you could add the files to your `excludes` file (a version after 0.0.19 should identify the file path)
# Lorem
(?:\w|\s|[,.])*\b(?i)(?:amet|consectetur|cursus|dolor|eros|ipsum|lacus|libero|ligula|lorem|magna|neque|nulla|suscipit|tempus)\b(?:\w|\s|[,.])*
# Non-English
[a-zA-Z]*[ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*
# French
# This corpus only had capital letters, but you probably want lowercase ones as well.
\b[LN]'+[a-z]{2,}\b
# latex
\\(?:n(?:ew|ormal|osub)|r(?:enew)|t(?:able(?:of|)|he|itle))(?=[a-z]+)
# the negative lookahead here is to allow catching 'templatesz' as a misspelling
# but to otherwise recognize a Windows path with \templates\foo.template or similar:
\\(?:necessary|r(?:eport|esolve[dr]?|esult)|t(?:arget|emplates?))(?![a-z])
# ignore long runs of a single character:
\b([A-Za-z])\g{-1}{3,}\b
# Note that the next example is no longer necessary if you are using
# to match a string starting with a `#`, use a character-class:
[#]backwards
# version suffix <word>v#
(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
# Compiler flags (Scala)
(?:^|[\t ,>"'`=(])-J-[DPWXY](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
# Compiler flags
#(?:^|[\t ,"'`=(])-[DPWXYLlf](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
# Compiler flags (linker)
,-B
# curl arguments
\b(?:\\n|)curl(?:\s+-[a-zA-Z]{1,2}\b)*(?:\s+-[a-zA-Z]{3,})(?:\s+-[a-zA-Z]+)*
# set arguments
\bset(?:\s+-[abefimouxE]{1,2})*\s+-[abefimouxE]{3,}(?:\s+-[abefimouxE]+)*
# tar arguments
\b(?:\\n|)g?tar(?:\.exe|)(?:(?:\s+--[-a-zA-Z]+|\s+-[a-zA-Z]+|\s[ABGJMOPRSUWZacdfh-pr-xz]+\b)(?:=[^ ]*|))+
# tput arguments -- https://man7.org/linux/man-pages/man5/terminfo.5.html -- technically they can be more than 5 chars long...
\btput\s+(?:(?:-[SV]|-T\s*\w+)\s+)*\w{3,5}\b
# macOS temp folders
/var/folders/\w\w/[+\w]+/(?:T|-Caches-)/

View File

@@ -2,14 +2,14 @@
(?:(?i)\.png$)
(?:^|/)(?i)COPYRIGHT
(?:^|/)(?i)LICEN[CS]E
(?:^|/)3rdparty/
(?:^|/)dirs$
(?:^|/)go\.mod$
(?:^|/)go\.sum$
(?:^|/)package(?:-lock|)\.json$
(?:^|/)sources(?:|\.dep)$
(?:^|/)vendor/
ignore$
SUMS$
\.a$
\.ai$
\.avi$
\.bmp$
@@ -20,6 +20,8 @@ SUMS$
\.crt$
\.csr$
\.dll$
\.docx?$
\.drawio$
\.DS_Store$
\.eot$
\.eps$
@@ -31,6 +33,7 @@ SUMS$
\.icns$
\.ico$
\.jar$
\.jks$
\.jpeg$
\.jpg$
\.key$
@@ -41,6 +44,7 @@ SUMS$
\.mod$
\.mp3$
\.mp4$
\.o$
\.ocf$
\.otf$
\.pbxproj$
@@ -48,22 +52,41 @@ SUMS$
\.pem$
\.png$
\.psd$
\.pyc$
\.runsettings$
\.s$
\.sig$
\.so$
\.svg$
\.svgz$
\.svgz?$
\.tar$
\.tgz$
\.tiff?$
\.ttf$
\.vsdx$
\.wav$
\.webm$
\.webp$
\.woff
\.woff2?$
\.xcf$
\.xls
\.xlsx?$
\.xpm$
\.yml$
\.zip$
^\.github/actions/spelling/
^\.github/fabricbot.json$
^\.gitignore$
^\Q.git-blame-ignore-revs\E$
^\Q.github/workflows/spelling.yml\E$
^\Qdoc/reference/windows-terminal-logo.ans\E$
^\Qsamples/ConPTY/EchoCon/EchoCon/EchoCon.vcxproj.filters\E$
^\Qsrc/host/exe/Host.EXE.vcxproj.filters\E$
^\Qsrc/host/ft_host/chafa.txt\E$
^\Qsrc/tools/closetest/CloseTest.vcxproj.filters\E$
^\XamlStyler.json$
^build/config/
^consolegit2gitfilters\.json$
^dep/
@@ -90,12 +113,5 @@ SUMS$
^src/tools/U8U16Test/(?:fr|ru|zh)\.txt$
^src/types/ut_types/UtilsTests.cpp$
^tools/ReleaseEngineering/ServicingPipeline.ps1$
^\.github/actions/spelling/
^\.github/fabricbot.json$
^\.gitignore$
^\Q.github/workflows/spelling.yml\E$
^\Qsamples/ConPTY/EchoCon/EchoCon/EchoCon.vcxproj.filters\E$
^\Qsrc/host/exe/Host.EXE.vcxproj.filters\E$
^\Qsrc/host/ft_host/chafa.txt\E$
^\Qsrc/tools/closetest/CloseTest.vcxproj.filters\E$
^\XamlStyler.json$
ignore$
SUMS$

View File

@@ -5,26 +5,19 @@ AAAAAABBBBBBCCC
AAAAABBBBBBCCC
abcd
abcd
abcde
abcdef
ABCDEFG
ABCDEFGH
ABCDEFGHIJ
abcdefghijk
ABCDEFGHIJKLMNO
abcdefghijklmnop
ABCDEFGHIJKLMNOPQRST
abcdefghijklmnopqrstuvwxyz
ABCG
ABE
abf
BBBBB
BBBBBBBB
BBBBBBBBBBBBBBDDDD
BBBBBCCC
BBBBCCCCC
BBGGRR
CCE
EFG
EFGh
QQQQQQQQQQABCDEFGHIJ

File diff suppressed because it is too large Load Diff

View File

@@ -1,5 +1,3 @@
http
www
WCAG
winui
appshellintegration

View File

@@ -1,3 +1,11 @@
# reject `m_data` as there's a certain OS which has evil defines that break things if it's used elsewhere
# \bm_data\b
# If you have a framework that uses `it()` for testing and `fit()` for debugging a specific test,
# you might not want to check in code where you were debugging w/ `fit()`, in which case, you might want
# to use this:
#\bfit\(
# s.b. GitHub
\bGithub\b
@@ -16,6 +24,12 @@
# s.b. greater than
\bgreater then\b
# s.b. into
#\sin to\s
# s.b. opt-in
\sopt in\s
# s.b. less than
\bless then\b
@@ -27,10 +41,22 @@
\b[Nn]o[nt][- ]existent\b
# s.b. preexisting
[Pp]re-existing
[Pp]re[- ]existing
# s.b. preempt
[Pp]re[- ]empt\b
# s.b. preemptively
[Pp]re-emptively
[Pp]re[- ]emptively
# s.b. reentrancy
[Rr]e[- ]entrancy
# s.b. reentrant
[Rr]e[- ]entrant
# s.b. workaround(s)
#\bwork[- ]arounds?\b
# Reject duplicate words
\s([A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})\s\g{-1}\s

View File

@@ -27,13 +27,68 @@ ROY\sG\.\sBIV
# Python stringprefix / binaryprefix
\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'
# Automatically suggested patterns
# hit-count: 3831 file-count: 582
# IServiceProvider
\bI(?=(?:[A-Z][a-z]{2,})+\b)
# hit-count: 71 file-count: 35
# Compiler flags
(?:^|[\t ,"'`=(])-[D](?=[A-Z]{2,}|[A-Z][a-z])
(?:^|[\t ,"'`=(])-[X](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
# hit-count: 41 file-count: 28
# version suffix <word>v#
(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
# hit-count: 20 file-count: 9
# hex runs
\b[0-9a-fA-F]{16,}\b
# hit-count: 10 file-count: 7
# uuid:
\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
# hit-count: 4 file-count: 4
# mailto urls
mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
# hit-count: 4 file-count: 1
# ANSI color codes
(?:\\(?:u00|x)1b|\x1b)\[\d+(?:;\d+|)m
# hit-count: 2 file-count: 1
# latex
\\(?:n(?:ew|ormal|osub)|r(?:enew)|t(?:able(?:of|)|he|itle))(?=[a-z]+)
# hit-count: 1 file-count: 1
# hex digits including css/html color classes:
(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|u\d+)\b
# hit-count: 1 file-count: 1
# Non-English
[a-zA-Z]*[ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*
# hit-count: 1 file-count: 1
# French
# This corpus only had capital letters, but you probably want lowercase ones as well.
\b[LN]'+[a-z]{2,}\b
# acceptable duplicates
# ls directory listings
[-bcdlpsw](?:[-r][-w][-sx]){3}\s+\d+\s+(\S+)\s+\g{-1}\s+\d+\s+
# C/idl types + English ...
\s(Guid|long|LONG|that) \g{-1}\s
# javadoc / .net
(?:\@(?:groupname|param)|(?:public|private)(?:\s+static|\s+readonly)*)\s+(\w+)\s+\g{-1}\s
(?:[\\@](?:groupname|param)|(?:public|private)(?:\s+static|\s+readonly)*)\s+(\w+)\s+\g{-1}\s
# Commit message -- Signed-off-by and friends
^\s*(?:(?:Based-on-patch|Co-authored|Helped|Mentored|Reported|Reviewed|Signed-off)-by|Thanks-to): (?:[^<]*<[^>]*>|[^<]*)\s*$
# Autogenerated revert commit message
^This reverts commit [0-9a-f]{40}\.$
# vtmode
--vtmode\s+(\w+)\s+\g{-1}\s

View File

@@ -1,31 +1,12 @@
benefitting
occurences?
Sorce
^attache$
^attacher$
^attachers$
benefitting
occurences?
^dependan.*
^oer$
^spae$
^spae-man$
^spaebook$
^spaecraft$
^spaed$
^spaedom$
^spaeing$
^spaeings$
^spaeman$
^spaer$
^Spaerobee$
^spaes$
^spaewife$
^spaewoman$
^spaework$
^spaewright$
Sorce
^[Ss]pae.*
^untill$
^untilling$
^wether$
^wether.*
^wethers$
^wetherteg$
^[Ss]pae.*

20
.github/workflows/addToProject.yml vendored Normal file
View File

@@ -0,0 +1,20 @@
name: Add triaged bugs & tasks to project board
# https://github.com/actions/add-to-project
on:
issues:
types:
- labeled
- unlabeled
jobs:
add-to-project:
name: Add issue to project
runs-on: ubuntu-latest
steps:
- uses: actions/add-to-project@v0.3.0
with:
project-url: https://github.com/orgs/microsoft/projects/159
github-token: ${{ secrets.ADD_TO_PROJECT_PAT }}
labeled: Issue-Feature, Needs-Triage, Needs-Author-Feedback, Issue-Scenario
label-operator: NOT

View File

@@ -1,10 +1,57 @@
# spelling.yml is blocked per https://github.com/check-spelling/check-spelling/security/advisories/GHSA-g86g-chm8-7r2p
name: Spell checking
# Comment management is handled through a secondary job, for details see:
# https://github.com/check-spelling/check-spelling/wiki/Feature%3A-Restricted-Permissions
#
# `jobs.comment-push` runs when a push is made to a repository and the `jobs.spelling` job needs to make a comment
# (in odd cases, it might actually run just to collapse a commment, but that's fairly rare)
# it needs `contents: write` in order to add a comment.
#
# `jobs.comment-pr` runs when a pull_request is made to a repository and the `jobs.spelling` job needs to make a comment
# or collapse a comment (in the case where it had previously made a comment and now no longer needs to show a comment)
# it needs `pull-requests: write` in order to manipulate those comments.
# Updating pull request branches is managed via comment handling.
# For details, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Update-expect-list
#
# These elements work together to make it happen:
#
# `on.issue_comment`
# This event listens to comments by users asking to update the metadata.
#
# `jobs.update`
# This job runs in response to an issue_comment and will push a new commit
# to update the spelling metadata.
#
# `with.experimental_apply_changes_via_bot`
# Tells the action to support and generate messages that enable it
# to make a commit to update the spelling metadata.
#
# `with.ssh_key`
# In order to trigger workflows when the commit is made, you can provide a
# secret (typically, a write-enabled github deploy key).
#
# For background, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Update-with-deploy-key
on:
pull_request_target:
push:
branches: ["**"]
tags-ignore: ["**"]
branches:
- "**"
tags-ignore:
- "**"
pull_request_target:
branches:
- "**"
tags-ignore:
- "**"
types:
- 'opened'
- 'reopened'
- 'synchronize'
issue_comment:
types:
- 'created'
jobs:
spelling:
@@ -24,23 +71,64 @@ jobs:
steps:
- name: check-spelling
id: spelling
uses: check-spelling/check-spelling@v0.0.20
uses: check-spelling/check-spelling@v0.0.21
with:
suppress_push_for_open_pull_request: 1
checkout: true
check_file_names: 1
spell_check_this: check-spelling/spell-check-this@prerelease
post_comment: 0
use_magic_file: 1
extra_dictionary_limit: 10
extra_dictionaries:
cspell:software-terms/src/software-terms.txt
cspell:python/src/python/python-lib.txt
cspell:node/node.txt
cspell:cpp/src/stdlib-c.txt
cspell:cpp/src/stdlib-cpp.txt
cspell:fullstack/fullstack.txt
cspell:filetypes/filetypes.txt
cspell:html/html.txt
cspell:cpp/src/compiler-msvc.txt
cspell:python/src/common/extra.txt
cspell:powershell/powershell.txt
cspell:aws/aws.txt
cspell:cpp/src/lang-keywords.txt
cspell:npm/npm.txt
cspell:dotnet/dotnet.txt
cspell:python/src/python/python.txt
cspell:css/css.txt
cspell:cpp/src/stdlib-cmath.txt
check_extra_dictionaries: ''
comment:
name: Report
comment-push:
name: Report (Push)
# If your workflow isn't running on push, you can remove this job
runs-on: ubuntu-latest
needs: spelling
permissions:
contents: write
pull-requests: write
if: (success() || failure()) && needs.spelling.outputs.followup && github.event_name != 'push'
if: (success() || failure()) && needs.spelling.outputs.followup && github.event_name == 'push'
steps:
- name: comment
uses: check-spelling/check-spelling@v0.0.20
uses: check-spelling/check-spelling@v0.0.21
with:
checkout: true
spell_check_this: check-spelling/spell-check-this@prerelease
task: ${{ needs.spelling.outputs.followup }}
comment-pr:
name: Report (PR)
# If you workflow isn't running on pull_request*, you can remove this job
runs-on: ubuntu-latest
needs: spelling
permissions:
pull-requests: write
if: (success() || failure()) && needs.spelling.outputs.followup && contains(github.event_name, 'pull_request')
steps:
- name: comment
uses: check-spelling/check-spelling@v0.0.21
with:
checkout: true
spell_check_this: check-spelling/spell-check-this@prerelease
task: ${{ needs.spelling.outputs.followup }}

3
.gitmodules vendored
View File

@@ -1,6 +1,3 @@
[submodule "dep/gsl"]
path = dep/gsl
url = https://github.com/microsoft/gsl
[submodule "dep/wil"]
path = dep/wil
url = https://github.com/microsoft/wil

View File

@@ -1,35 +1,36 @@
{
"version": "1.0",
"components": [
"Microsoft.Component.MSBuild",
"Microsoft.Net.Component.4.5.TargetingPack",
"Microsoft.Net.Component.4.TargetingPack",
"Microsoft.Net.ComponentGroup.DevelopmentPrerequisites",
"Microsoft.NetCore.Component.DevelopmentTools",
"Microsoft.VisualStudio.Component.CoreEditor",
"Microsoft.VisualStudio.Workload.CoreEditor",
"Microsoft.VisualStudio.Workload.Universal",
"Microsoft.VisualStudio.Workload.NativeDesktop",
"Microsoft.VisualStudio.Workload.ManagedDesktop",
"Microsoft.VisualStudio.Component.Debugger.JustInTime",
"Microsoft.VisualStudio.Component.DiagnosticTools",
"Microsoft.VisualStudio.Component.Graphics",
"Microsoft.VisualStudio.Component.ManagedDesktop.Core",
"Microsoft.VisualStudio.Component.ManagedDesktop.Prerequisites",
"Microsoft.VisualStudio.Component.NuGet",
"Microsoft.VisualStudio.Component.Roslyn.Compiler",
"Microsoft.VisualStudio.Component.Roslyn.LanguageServices",
"Microsoft.Net.ComponentGroup.DevelopmentPrerequisites",
"Microsoft.Component.MSBuild",
"Microsoft.VisualStudio.Component.ManagedDesktop.Core",
"Microsoft.Net.Component.4.TargetingPack",
"Microsoft.Net.Component.4.5.TargetingPack",
"Microsoft.VisualStudio.Component.DiagnosticTools",
"Microsoft.VisualStudio.Component.Debugger.JustInTime",
"Microsoft.VisualStudio.Component.Windows11SDK.22000",
"Microsoft.VisualStudio.ComponentGroup.UWP.Support",
"Microsoft.VisualStudio.Component.VC.CoreIde",
"Microsoft.VisualStudio.ComponentGroup.NativeDesktop.Core",
"Microsoft.VisualStudio.Component.Graphics",
"Microsoft.VisualStudio.Component.VC.Redist.14.Latest",
"Microsoft.VisualStudio.Component.VC.Tools.x86.x64",
"Microsoft.VisualStudio.Component.VC.Tools.ARM64",
"Microsoft.VisualStudio.Component.UWP.VC.ARM64",
"Microsoft.VisualStudio.Component.VC.ASAN",
"Microsoft.VisualStudio.Component.VC.v143.x86.x64",
"Microsoft.VisualStudio.Component.VC.CoreIde",
"Microsoft.VisualStudio.Component.VC.Redist.14.Latest",
"Microsoft.VisualStudio.Component.VC.Tools.ARM64",
"Microsoft.VisualStudio.Component.VC.Tools.x86.x64",
"Microsoft.VisualStudio.Component.VC.v143.ARM64",
"Microsoft.VisualStudio.ComponentGroup.UWP.VC",
"Microsoft.VisualStudio.Component.VC.v143.x86.x64",
"Microsoft.VisualStudio.Component.Windows11SDK.22621",
"Microsoft.VisualStudio.ComponentGroup.NativeDesktop.Core",
"Microsoft.VisualStudio.ComponentGroup.UWP.Support",
"Microsoft.VisualStudio.ComponentGroup.UWP.VC.v143",
"Microsoft.VisualStudio.Component.UWP.VC.ARM64"
"Microsoft.VisualStudio.ComponentGroup.UWP.VC",
"Microsoft.VisualStudio.Workload.CoreEditor",
"Microsoft.VisualStudio.Workload.ManagedDesktop",
"Microsoft.VisualStudio.Workload.NativeDesktop",
"Microsoft.VisualStudio.Workload.Universal"
]
}

View File

@@ -215,39 +215,6 @@ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
```
## boost
**Source**: [https://github.com/boostorg/boost](https://github.com/boostorg/boost)
### License
```
Boost Software License - Version 1.0 - August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization
obtaining a copy of the software and accompanying documentation covered by
this license (the "Software") to use, reproduce, display, distribute,
execute, and transmit the Software, and to prepare derivative works of the
Software, and to permit third-parties to whom the Software is furnished to
do so, all subject to the following:
The copyright notices in the Software and this entire statement, including
the above license grant, this restriction and the following disclaimer,
must be included in all copies of the Software, in whole or in part, and
all derivative works of the Software, unless such copies or derivative
works are solely in the form of machine-executable object code generated by
a source language processor.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
```
## PCG Random Number Generation
**Source**: [https://github.com/imneme/pcg-cpp](https://github.com/imneme/pcg-cpp)

View File

@@ -643,7 +643,8 @@ Global
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|ARM.ActiveCfg = Debug|Win32
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|ARM64.ActiveCfg = Debug|ARM64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|ARM64.Build.0 = Debug|ARM64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|DotNet_x64Test.ActiveCfg = Debug|Win32
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|DotNet_x64Test.ActiveCfg = Debug|x64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|DotNet_x64Test.Build.0 = Debug|x64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|DotNet_x86Test.ActiveCfg = Debug|Win32
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|x64.ActiveCfg = Debug|x64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Debug|x64.Build.0 = Debug|x64
@@ -661,7 +662,8 @@ Global
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|ARM.ActiveCfg = Release|Win32
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|ARM64.ActiveCfg = Release|ARM64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|ARM64.Build.0 = Release|ARM64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|DotNet_x64Test.ActiveCfg = Release|Win32
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|DotNet_x64Test.ActiveCfg = Release|x64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|DotNet_x64Test.Build.0 = Release|x64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|DotNet_x86Test.ActiveCfg = Release|Win32
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|x64.ActiveCfg = Release|x64
{DCF55140-EF6A-4736-A403-957E4F7430BB}.Release|x64.Build.0 = Release|x64
@@ -2308,7 +2310,8 @@ Global
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|ARM.ActiveCfg = Debug|Win32
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|ARM64.ActiveCfg = Debug|ARM64
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|ARM64.Build.0 = Debug|ARM64
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|DotNet_x64Test.ActiveCfg = Debug|Win32
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|DotNet_x64Test.ActiveCfg = Debug|x64
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|DotNet_x64Test.Build.0 = Debug|x64
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|DotNet_x86Test.ActiveCfg = Debug|Win32
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|x64.ActiveCfg = Debug|x64
{48D21369-3D7B-4431-9967-24E81292CF63}.Debug|x64.Build.0 = Debug|x64
@@ -2325,7 +2328,8 @@ Global
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|ARM.ActiveCfg = Release|Win32
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|ARM64.ActiveCfg = Release|ARM64
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|ARM64.Build.0 = Release|ARM64
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|DotNet_x64Test.ActiveCfg = Release|Win32
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|DotNet_x64Test.ActiveCfg = Release|x64
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|DotNet_x64Test.Build.0 = Release|x64
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|DotNet_x86Test.ActiveCfg = Release|Win32
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|x64.ActiveCfg = Release|x64
{48D21369-3D7B-4431-9967-24E81292CF63}.Release|x64.Build.0 = Release|x64
@@ -3313,7 +3317,8 @@ Global
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|ARM.ActiveCfg = Debug|Win32
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|ARM64.ActiveCfg = Debug|ARM64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|ARM64.Build.0 = Debug|ARM64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|DotNet_x64Test.ActiveCfg = Debug|Win32
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|DotNet_x64Test.ActiveCfg = Debug|x64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|DotNet_x64Test.Build.0 = Debug|x64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|DotNet_x86Test.ActiveCfg = Debug|Win32
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|x64.ActiveCfg = Debug|x64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Debug|x64.Build.0 = Debug|x64
@@ -3333,7 +3338,8 @@ Global
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|ARM.ActiveCfg = Release|Win32
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|ARM64.ActiveCfg = Release|ARM64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|ARM64.Build.0 = Release|ARM64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|DotNet_x64Test.ActiveCfg = Release|Win32
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|DotNet_x64Test.ActiveCfg = Release|x64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|DotNet_x64Test.Build.0 = Release|x64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|DotNet_x86Test.ActiveCfg = Release|Win32
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|x64.ActiveCfg = Release|x64
{8222900C-8B6C-452A-91AC-BE95DB04B95F}.Release|x64.Build.0 = Release|x64

View File

@@ -67,7 +67,7 @@ the latest Terminal release by installing the `Microsoft.WindowsTerminal`
package:
```powershell
winget install --id=Microsoft.WindowsTerminal -e
winget install --id Microsoft.WindowsTerminal -e
```
#### Via Chocolatey (unofficial)
@@ -289,7 +289,7 @@ If you would like to ask a question that you feel doesn't warrant an issue
app](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development)
to locally install and run Windows Terminal
* You must have [PowerShell 7 or later](https://github.com/PowerShell/PowerShell/releases/latest) installed
* You must have the [Windows 11 (10.0.22000.0)
* You must have the [Windows 11 (10.0.22621.0)
SDK](https://developer.microsoft.com/en-us/windows/downloads/windows-sdk/)
installed
* You must have at least [VS

View File

@@ -1,5 +1,5 @@
{
"msbuild-sdks": {
"Microsoft.DotNet.Helix.Sdk": "5.0.0-beta.20277.5"
"Microsoft.DotNet.Helix.Sdk": "6.0.0-beta.22525.5"
}
}

View File

@@ -4,7 +4,7 @@
"collection": "microsoft",
"project": "OS",
"repo": "os.2020",
"name": "official/rs_wdx_dxp_windev",
"name": "official/rs_we_adept_e4d2",
"workitem": "38106206",
"CheckinFiles": [
{
@@ -21,4 +21,4 @@
"sendOnErrorOnly": "False"
}
]
}
}

View File

@@ -14,16 +14,16 @@
<!-- Mandatory. Name of the NuGet package which will contain PGO databases for consumption by build system. -->
<PGOPackageName>Microsoft.Internal.Windows.Terminal.PGODatabase</PGOPackageName>
<!-- Mandatory. Major version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Mandatory. Major version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<PGOPackageVersionMajor>$(VersionMajor)</PGOPackageVersionMajor>
<!-- Mandatory. Minor version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Mandatory. Minor version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<PGOPackageVersionMinor>$(VersionMinor)</PGOPackageVersionMinor>
<!-- Mandatory, defaults to 0. Patch version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Mandatory, defaults to 0. Patch version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<PGOPackageVersionPatch>0</PGOPackageVersionPatch>
<!-- Optional, defaults to empty. Prerelease version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Optional, defaults to empty. Prerelease version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<PGOPackageVersionPrerelease></PGOPackageVersionPrerelease>
<!-- Mandatory. Path to nuget.config file for the project. Path is relative to where the props file will be. -->

View File

@@ -708,6 +708,7 @@ jobs:
description: VPack for the Windows Terminal Application
pushPkgName: WindowsTerminal.app
owner: conhost
githubToken: $(GitHubTokenForVpackProvenance)
- task: PublishPipelineArtifact@1
displayName: 'Copy VPack Manifest to Drop'
inputs:

View File

@@ -2,7 +2,7 @@
jobs:
- job: CodeFormatCheck
displayName: Proper Code Formatting Check
pool: { vmImage: windows-2019 }
pool: { vmImage: windows-2022 }
steps:
- checkout: self

View File

@@ -43,9 +43,9 @@ jobs:
filename: 'set'
- task: NuGetToolInstaller@0
displayName: 'Use NuGet 5.2.0'
displayName: 'Use NuGet 6.3.0'
inputs:
versionSpec: 5.2.0
versionSpec: 6.3.0
- task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
displayName: 'NuGet restore build/Helix/packages.config'

View File

@@ -27,9 +27,9 @@ jobs:
displayName: 'Retrieve VC tools directory'
- task: NuGetToolInstaller@0
displayName: 'Use NuGet 5.2.0'
displayName: 'Use NuGet 6.3.0'
inputs:
versionSpec: 5.2.0
versionSpec: 6.3.0
- task: NuGetAuthenticate@0

View File

@@ -1,8 +1,8 @@
steps:
- task: NuGetToolInstaller@0
displayName: 'Use NuGet 5.2.0'
displayName: 'Use NuGet 6.3.0'
inputs:
versionSpec: 5.2.0
versionSpec: 6.3.0
- task: NuGetAuthenticate@0

View File

@@ -22,7 +22,7 @@ Param(
[Parameter(HelpMessage="Path to makeappx.exe")]
[ValidateScript({Test-Path $_ -Type Leaf})]
[string]
$MakeAppxPath = "C:\Program Files (x86)\Windows Kits\10\bin\10.0.22000.0\x86\MakeAppx.exe"
$MakeAppxPath = "C:\Program Files (x86)\Windows Kits\10\bin\10.0.22621.0\x86\MakeAppx.exe"
)
If ($null -Eq (Get-Item $MakeAppxPath -EA:SilentlyContinue)) {

View File

@@ -8,7 +8,7 @@ Param(
[Parameter(HelpMessage="Path to Windows Kit")]
[ValidateScript({Test-Path $_ -Type Leaf})]
[string]
$WindowsKitPath = "C:\Program Files (x86)\Windows Kits\10\bin\10.0.22000.0"
$WindowsKitPath = "C:\Program Files (x86)\Windows Kits\10\bin\10.0.22621.0"
)
$ErrorActionPreference = "Stop"

View File

@@ -17,7 +17,7 @@
<XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
<XesBaseYearForStoreVersion>2022</XesBaseYearForStoreVersion>
<VersionMajor>1</VersionMajor>
<VersionMinor>16</VersionMinor>
<VersionMinor>17</VersionMinor>
<VersionInfoProductName>Windows Terminal</VersionInfoProductName>
</PropertyGroup>
</Project>

View File

@@ -6,7 +6,7 @@
"type": "git",
"git": {
"repositoryUrl": "https://github.com/CLIUtils/CLI11",
"commitHash": "dd0d8e4fe729e5b1110232c7a5c9566dad884686"
"commitHash": "5cb3efabce007c3a0230e4cc2e27da491c646b6c"
}
}
}

View File

@@ -13,6 +13,10 @@ Licensed under the MIT license.
#define CIS_EVENT_TYPE_FOCUS (1)
#define CIS_EVENT_TYPE_FOCUS_ACK (2)
#define CIS_MSG_TYPE_MAPVIRTUALKEY (0)
#define CIS_MSG_TYPE_VKKEYSCAN (1)
#define CIS_MSG_TYPE_GETKEYSTATE (2)
#define CIS_MSG_TYPE_GETDISPLAYSIZE (3)
#define CIS_MSG_TYPE_GETFONTSIZE (4)
#define CIS_MSG_TYPE_SETCURSOR (5)
@@ -31,6 +35,22 @@ typedef struct {
UCHAR Type;
union {
struct {
UINT Code;
UINT MapType;
UINT ReturnValue;
} MapVirtualKeyParams;
struct {
WCHAR Character;
SHORT ReturnValue;
} VkKeyScanParams;
struct {
int VirtualKey;
SHORT ReturnValue;
} GetKeyStateParams;
struct {
CD_IO_DISPLAY_SIZE DisplaySize;

View File

@@ -2,8 +2,8 @@
[Amalgamated](https://github.com/open-source-parsers/jsoncpp/wiki/Amalgamated)
from source commit
[6aba23f](https://github.com/open-source-parsers/jsoncpp/commit/6aba23f4a8628d599a9ef7fa4811c4ff6e4070e2),
release 1.9.3.
[5defb4e](https://github.com/open-source-parsers/jsoncpp/commit/5defb4ed1a4293b8e2bf641e16b156fb9de498cc),
release 1.9.5.
> Generating amalgamated source and header JsonCpp is provided with a script to
> generate a single header and a single source file to ease inclusion into an

View File

@@ -6,7 +6,7 @@
"type": "git",
"git": {
"repositoryUrl": "https://github.com/open-source-parsers/jsoncpp",
"commitHash": "6aba23f4a8628d599a9ef7fa4811c4ff6e4070e2"
"commitHash": "5defb4ed1a4293b8e2bf641e16b156fb9de498cc"
}
}
}

View File

@@ -7,28 +7,28 @@
// //////////////////////////////////////////////////////////////////////
/*
The JsonCpp library's source code, including accompanying documentation,
The JsonCpp library's source code, including accompanying documentation,
tests and demonstration applications, are licensed under the following
conditions...
Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all
jurisdictions which recognize such a disclaimer. In such jurisdictions,
Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all
jurisdictions which recognize such a disclaimer. In such jurisdictions,
this software is released into the Public Domain.
In jurisdictions which do not recognize Public Domain property (e.g. Germany as of
2010), this software is Copyright (c) 2007-2010 by Baptiste Lepilleur and
The JsonCpp Authors, and is released under the terms of the MIT License (see below).
In jurisdictions which recognize Public Domain property, the user of this
software may choose to accept it either as 1) Public Domain, 2) under the
conditions of the MIT License (see below), or 3) under the terms of dual
In jurisdictions which recognize Public Domain property, the user of this
software may choose to accept it either as 1) Public Domain, 2) under the
conditions of the MIT License (see below), or 3) under the terms of dual
Public Domain/MIT License conditions described here, as they choose.
The MIT License is about as close to Public Domain as a license can get, and is
described in clear, concise terms at:
http://en.wikipedia.org/wiki/MIT_License
The full text of the MIT License follows:
========================================================================
@@ -94,10 +94,10 @@ license you like.
// 3. /CMakeLists.txt
// IMPORTANT: also update the SOVERSION!!
#define JSONCPP_VERSION_STRING "1.9.3"
#define JSONCPP_VERSION_STRING "1.9.5"
#define JSONCPP_VERSION_MAJOR 1
#define JSONCPP_VERSION_MINOR 9
#define JSONCPP_VERSION_PATCH 3
#define JSONCPP_VERSION_PATCH 5
#define JSONCPP_VERSION_QUALIFIER
#define JSONCPP_VERSION_HEXA \
((JSONCPP_VERSION_MAJOR << 24) | (JSONCPP_VERSION_MINOR << 16) | \
@@ -162,11 +162,10 @@ public:
* Release memory which was allocated for N items at pointer P.
*
* The memory block is filled with zeroes before being released.
* The pointer argument is tagged as "volatile" to prevent the
* compiler optimizing out this critical step.
*/
void deallocate(volatile pointer p, size_type n) {
std::memset(p, 0, n * sizeof(T));
void deallocate(pointer p, size_type n) {
// memset_s is used because memset may be optimized away by the compiler
memset_s(p, n * sizeof(T), 0, n * sizeof(T));
// free using "global operator delete"
::operator delete(p);
}

View File

@@ -6,28 +6,28 @@
// //////////////////////////////////////////////////////////////////////
/*
The JsonCpp library's source code, including accompanying documentation,
The JsonCpp library's source code, including accompanying documentation,
tests and demonstration applications, are licensed under the following
conditions...
Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all
jurisdictions which recognize such a disclaimer. In such jurisdictions,
Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all
jurisdictions which recognize such a disclaimer. In such jurisdictions,
this software is released into the Public Domain.
In jurisdictions which do not recognize Public Domain property (e.g. Germany as of
2010), this software is Copyright (c) 2007-2010 by Baptiste Lepilleur and
The JsonCpp Authors, and is released under the terms of the MIT License (see below).
In jurisdictions which recognize Public Domain property, the user of this
software may choose to accept it either as 1) Public Domain, 2) under the
conditions of the MIT License (see below), or 3) under the terms of dual
In jurisdictions which recognize Public Domain property, the user of this
software may choose to accept it either as 1) Public Domain, 2) under the
conditions of the MIT License (see below), or 3) under the terms of dual
Public Domain/MIT License conditions described here, as they choose.
The MIT License is about as close to Public Domain as a license can get, and is
described in clear, concise terms at:
http://en.wikipedia.org/wiki/MIT_License
The full text of the MIT License follows:
========================================================================
@@ -93,10 +93,10 @@ license you like.
// 3. /CMakeLists.txt
// IMPORTANT: also update the SOVERSION!!
#define JSONCPP_VERSION_STRING "1.9.3"
#define JSONCPP_VERSION_STRING "1.9.5"
#define JSONCPP_VERSION_MAJOR 1
#define JSONCPP_VERSION_MINOR 9
#define JSONCPP_VERSION_PATCH 3
#define JSONCPP_VERSION_PATCH 5
#define JSONCPP_VERSION_QUALIFIER
#define JSONCPP_VERSION_HEXA \
((JSONCPP_VERSION_MAJOR << 24) | (JSONCPP_VERSION_MINOR << 16) | \
@@ -161,11 +161,10 @@ public:
* Release memory which was allocated for N items at pointer P.
*
* The memory block is filled with zeroes before being released.
* The pointer argument is tagged as "volatile" to prevent the
* compiler optimizing out this critical step.
*/
void deallocate(volatile pointer p, size_type n) {
std::memset(p, 0, n * sizeof(T));
void deallocate(pointer p, size_type n) {
// memset_s is used because memset may be optimized away by the compiler
memset_s(p, n * sizeof(T), 0, n * sizeof(T));
// free using "global operator delete"
::operator delete(p);
}
@@ -575,7 +574,7 @@ public:
// be used by...
#if defined(JSONCPP_DISABLE_DLL_INTERFACE_WARNING)
#pragma warning(push)
#pragma warning(disable : 4251)
#pragma warning(disable : 4251 4275)
#endif // if defined(JSONCPP_DISABLE_DLL_INTERFACE_WARNING)
#pragma pack(push, 8)
@@ -788,10 +787,10 @@ private:
CZString(ArrayIndex index);
CZString(char const* str, unsigned length, DuplicationPolicy allocate);
CZString(CZString const& other);
CZString(CZString&& other);
CZString(CZString&& other) noexcept;
~CZString();
CZString& operator=(const CZString& other);
CZString& operator=(CZString&& other);
CZString& operator=(CZString&& other) noexcept;
bool operator<(CZString const& other) const;
bool operator==(CZString const& other) const;
@@ -867,14 +866,15 @@ public:
Value(const StaticString& value);
Value(const String& value);
Value(bool value);
Value(std::nullptr_t ptr) = delete;
Value(const Value& other);
Value(Value&& other);
Value(Value&& other) noexcept;
~Value();
/// \note Overwrite existing comments. To preserve comments, use
/// #swapPayload().
Value& operator=(const Value& other);
Value& operator=(Value&& other);
Value& operator=(Value&& other) noexcept;
/// Swap everything.
void swap(Value& other);
@@ -1159,9 +1159,9 @@ private:
public:
Comments() = default;
Comments(const Comments& that);
Comments(Comments&& that);
Comments(Comments&& that) noexcept;
Comments& operator=(const Comments& that);
Comments& operator=(Comments&& that);
Comments& operator=(Comments&& that) noexcept;
bool has(CommentPlacement slot) const;
String get(CommentPlacement slot) const;
void set(CommentPlacement slot, String comment);
@@ -1442,8 +1442,8 @@ public:
* because the returned references/pointers can be used
* to change state of the base class.
*/
reference operator*() { return deref(); }
pointer operator->() { return &deref(); }
reference operator*() const { return const_cast<reference>(deref()); }
pointer operator->() const { return const_cast<pointer>(&deref()); }
};
inline void swap(Value& a, Value& b) { a.swap(b); }
@@ -1506,8 +1506,7 @@ namespace Json {
* \deprecated Use CharReader and CharReaderBuilder.
*/
class JSONCPP_DEPRECATED(
"Use CharReader and CharReaderBuilder instead.") JSON_API Reader {
class JSON_API Reader {
public:
using Char = char;
using Location = const Char*;
@@ -1524,13 +1523,13 @@ public:
};
/** \brief Constructs a Reader allowing all features for parsing.
* \deprecated Use CharReader and CharReaderBuilder.
*/
JSONCPP_DEPRECATED("Use CharReader and CharReaderBuilder instead")
Reader();
/** \brief Constructs a Reader allowing the specified feature set for parsing.
* \deprecated Use CharReader and CharReaderBuilder.
*/
JSONCPP_DEPRECATED("Use CharReader and CharReaderBuilder instead")
Reader(const Features& features);
/** \brief Read a Value from a <a HREF="http://www.json.org">JSON</a>
@@ -1797,6 +1796,9 @@ public:
* - `"allowSpecialFloats": false or true`
* - If true, special float values (NaNs and infinities) are allowed and
* their values are lossfree restorable.
* - `"skipBom": false or true`
* - If true, if the input starts with the Unicode byte order mark (BOM),
* it is skipped.
*
* You can examine 'settings_` yourself to see the defaults. You can also
* write and read them just like any JSON Value.
@@ -2000,6 +2002,8 @@ public:
* - Number of precision digits for formatting of real values.
* - "precisionType": "significant"(default) or "decimal"
* - Type of precision for formatting of real values.
* - "emitUTF8": false or true
* - If true, outputs raw UTF8 strings instead of escaping them.
* You can examine 'settings_` yourself
* to see the defaults. You can also write and read them just like any
@@ -2035,7 +2039,7 @@ public:
/** \brief Abstract class for writers.
* \deprecated Use StreamWriter. (And really, this is an implementation detail.)
*/
class JSONCPP_DEPRECATED("Use StreamWriter instead") JSON_API Writer {
class JSON_API Writer {
public:
virtual ~Writer();
@@ -2055,7 +2059,7 @@ public:
#pragma warning(push)
#pragma warning(disable : 4996) // Deriving from deprecated class
#endif
class JSONCPP_DEPRECATED("Use StreamWriterBuilder instead") JSON_API FastWriter
class JSON_API FastWriter
: public Writer {
public:
FastWriter();
@@ -2115,7 +2119,7 @@ private:
#pragma warning(push)
#pragma warning(disable : 4996) // Deriving from deprecated class
#endif
class JSONCPP_DEPRECATED("Use StreamWriterBuilder instead") JSON_API
class JSON_API
StyledWriter : public Writer {
public:
StyledWriter();
@@ -2184,7 +2188,7 @@ private:
#pragma warning(push)
#pragma warning(disable : 4996) // Deriving from deprecated class
#endif
class JSONCPP_DEPRECATED("Use StreamWriterBuilder instead") JSON_API
class JSON_API
StyledStreamWriter {
public:
/**

View File

@@ -6,28 +6,28 @@
// //////////////////////////////////////////////////////////////////////
/*
The JsonCpp library's source code, including accompanying documentation,
The JsonCpp library's source code, including accompanying documentation,
tests and demonstration applications, are licensed under the following
conditions...
Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all
jurisdictions which recognize such a disclaimer. In such jurisdictions,
Baptiste Lepilleur and The JsonCpp Authors explicitly disclaim copyright in all
jurisdictions which recognize such a disclaimer. In such jurisdictions,
this software is released into the Public Domain.
In jurisdictions which do not recognize Public Domain property (e.g. Germany as of
2010), this software is Copyright (c) 2007-2010 by Baptiste Lepilleur and
The JsonCpp Authors, and is released under the terms of the MIT License (see below).
In jurisdictions which recognize Public Domain property, the user of this
software may choose to accept it either as 1) Public Domain, 2) under the
conditions of the MIT License (see below), or 3) under the terms of dual
In jurisdictions which recognize Public Domain property, the user of this
software may choose to accept it either as 1) Public Domain, 2) under the
conditions of the MIT License (see below), or 3) under the terms of dual
Public Domain/MIT License conditions described here, as they choose.
The MIT License is about as close to Public Domain as a license can get, and is
described in clear, concise terms at:
http://en.wikipedia.org/wiki/MIT_License
The full text of the MIT License follows:
========================================================================
@@ -202,14 +202,18 @@ template <typename Iter> void fixNumericLocaleInput(Iter begin, Iter end) {
* Return iterator that would be the new end of the range [begin,end), if we
* were to delete zeros in the end of string, but not the last zero before '.'.
*/
template <typename Iter> Iter fixZerosInTheEnd(Iter begin, Iter end) {
template <typename Iter>
Iter fixZerosInTheEnd(Iter begin, Iter end, unsigned int precision) {
for (; begin != end; --end) {
if (*(end - 1) != '0') {
return end;
}
// Don't delete the last zero before the decimal point.
if (begin != (end - 1) && *(end - 2) == '.') {
return end;
if (begin != (end - 1) && begin != (end - 2) && *(end - 2) == '.') {
if (precision) {
return end;
}
return end - 2;
}
}
return end;
@@ -338,8 +342,7 @@ bool Reader::parse(std::istream& is, Value& root, bool collectComments) {
// Since String is reference-counted, this at least does not
// create an extra copy.
String doc;
std::getline(is, doc, static_cast<char> EOF);
String doc(std::istreambuf_iterator<char>(is), {});
return parse(doc.data(), doc.data() + doc.size(), root, collectComments);
}
@@ -1409,8 +1412,11 @@ bool OurReader::readToken(Token& token) {
if (features_.allowSingleQuotes_) {
token.type_ = tokenString;
ok = readStringSingleQuote();
break;
} // else fall through
} else {
// If we don't allow single quotes, this is a failure case.
ok = false;
}
break;
case '/':
token.type_ = tokenComment;
ok = readComment();
@@ -2152,7 +2158,7 @@ bool CharReaderBuilder::validate(Json::Value* invalid) const {
if (valid_keys.count(key))
continue;
if (invalid)
(*invalid)[std::move(key)] = *si;
(*invalid)[key] = *si;
else
return false;
}
@@ -2667,7 +2673,7 @@ Value::CZString::CZString(const CZString& other) {
storage_.length_ = other.storage_.length_;
}
Value::CZString::CZString(CZString&& other)
Value::CZString::CZString(CZString&& other) noexcept
: cstr_(other.cstr_), index_(other.index_) {
other.cstr_ = nullptr;
}
@@ -2693,7 +2699,7 @@ Value::CZString& Value::CZString::operator=(const CZString& other) {
return *this;
}
Value::CZString& Value::CZString::operator=(CZString&& other) {
Value::CZString& Value::CZString::operator=(CZString&& other) noexcept {
cstr_ = other.cstr_;
index_ = other.index_;
other.cstr_ = nullptr;
@@ -2841,7 +2847,7 @@ Value::Value(const Value& other) {
dupMeta(other);
}
Value::Value(Value&& other) {
Value::Value(Value&& other) noexcept {
initBasic(nullValue);
swap(other);
}
@@ -2856,7 +2862,7 @@ Value& Value::operator=(const Value& other) {
return *this;
}
Value& Value::operator=(Value&& other) {
Value& Value::operator=(Value&& other) noexcept {
other.swap(*this);
return *this;
}
@@ -3320,7 +3326,8 @@ void Value::resize(ArrayIndex newSize) {
if (newSize == 0)
clear();
else if (newSize > oldSize)
this->operator[](newSize - 1);
for (ArrayIndex i = oldSize; i < newSize; ++i)
(*this)[i];
else {
for (ArrayIndex index = newSize; index < oldSize; ++index) {
value_.map_->erase(index);
@@ -3781,14 +3788,15 @@ bool Value::isObject() const { return type() == objectValue; }
Value::Comments::Comments(const Comments& that)
: ptr_{cloneUnique(that.ptr_)} {}
Value::Comments::Comments(Comments&& that) : ptr_{std::move(that.ptr_)} {}
Value::Comments::Comments(Comments&& that) noexcept
: ptr_{std::move(that.ptr_)} {}
Value::Comments& Value::Comments::operator=(const Comments& that) {
ptr_ = cloneUnique(that.ptr_);
return *this;
}
Value::Comments& Value::Comments::operator=(Comments&& that) {
Value::Comments& Value::Comments::operator=(Comments&& that) noexcept {
ptr_ = std::move(that.ptr_);
return *this;
}
@@ -3804,13 +3812,11 @@ String Value::Comments::get(CommentPlacement slot) const {
}
void Value::Comments::set(CommentPlacement slot, String comment) {
if (!ptr_) {
if (slot >= CommentPlacement::numberOfCommentPlacement)
return;
if (!ptr_)
ptr_ = std::unique_ptr<Array>(new Array());
}
// check comments array boundry.
if (slot < CommentPlacement::numberOfCommentPlacement) {
(*ptr_)[slot] = std::move(comment);
}
(*ptr_)[slot] = std::move(comment);
}
void Value::setComment(String comment, CommentPlacement placement) {
@@ -4124,7 +4130,7 @@ Value& Path::make(Value& root) const {
#if !defined(isnan)
// IEEE standard states that NaN values will not compare to themselves
#define isnan(x) (x != x)
#define isnan(x) ((x) != (x))
#endif
#if !defined(__APPLE__)
@@ -4210,16 +4216,18 @@ String valueToString(double value, bool useSpecialFloats,
buffer.erase(fixNumericLocale(buffer.begin(), buffer.end()), buffer.end());
// strip the zero padding from the right
if (precisionType == PrecisionType::decimalPlaces) {
buffer.erase(fixZerosInTheEnd(buffer.begin(), buffer.end()), buffer.end());
}
// try to ensure we preserve the fact that this was given to us as a double on
// input
if (buffer.find('.') == buffer.npos && buffer.find('e') == buffer.npos) {
buffer += ".0";
}
// strip the zero padding from the right
if (precisionType == PrecisionType::decimalPlaces) {
buffer.erase(fixZerosInTheEnd(buffer.begin(), buffer.end(), precision),
buffer.end());
}
return buffer;
}
} // namespace
@@ -4231,11 +4239,11 @@ String valueToString(double value, unsigned int precision,
String valueToString(bool value) { return value ? "true" : "false"; }
static bool isAnyCharRequiredQuoting(char const* s, size_t n) {
static bool doesAnyCharRequireEscaping(char const* s, size_t n) {
assert(s || !n);
return std::any_of(s, s + n, [](unsigned char c) {
return c == '\\' || c == '"' || !std::isprint(c);
return c == '\\' || c == '"' || c < 0x20 || c > 0x7F;
});
}
@@ -4326,12 +4334,12 @@ static void appendHex(String& result, unsigned ch) {
result.append("\\u").append(toHex16Bit(ch));
}
static String valueToQuotedStringN(const char* value, unsigned length,
static String valueToQuotedStringN(const char* value, size_t length,
bool emitUTF8 = false) {
if (value == nullptr)
return "";
if (!isAnyCharRequiredQuoting(value, length))
if (!doesAnyCharRequireEscaping(value, length))
return String("\"") + value + "\"";
// We have to walk value and escape any special characters.
// Appending to String is not efficient, but this should be rare.
@@ -4404,7 +4412,7 @@ static String valueToQuotedStringN(const char* value, unsigned length,
}
String valueToQuotedString(const char* value) {
return valueToQuotedStringN(value, static_cast<unsigned int>(strlen(value)));
return valueToQuotedStringN(value, strlen(value));
}
// Class Writer
@@ -4453,7 +4461,7 @@ void FastWriter::writeValue(const Value& value) {
char const* end;
bool ok = value.getString(&str, &end);
if (ok)
document_ += valueToQuotedStringN(str, static_cast<unsigned>(end - str));
document_ += valueToQuotedStringN(str, static_cast<size_t>(end - str));
break;
}
case booleanValue:
@@ -4476,8 +4484,7 @@ void FastWriter::writeValue(const Value& value) {
const String& name = *it;
if (it != members.begin())
document_ += ',';
document_ += valueToQuotedStringN(name.data(),
static_cast<unsigned>(name.length()));
document_ += valueToQuotedStringN(name.data(), name.length());
document_ += yamlCompatibilityEnabled_ ? ": " : ":";
writeValue(value[name]);
}
@@ -4522,7 +4529,7 @@ void StyledWriter::writeValue(const Value& value) {
char const* end;
bool ok = value.getString(&str, &end);
if (ok)
pushValue(valueToQuotedStringN(str, static_cast<unsigned>(end - str)));
pushValue(valueToQuotedStringN(str, static_cast<size_t>(end - str)));
else
pushValue("");
break;
@@ -4563,7 +4570,7 @@ void StyledWriter::writeValue(const Value& value) {
}
void StyledWriter::writeArrayValue(const Value& value) {
unsigned size = value.size();
size_t size = value.size();
if (size == 0)
pushValue("[]");
else {
@@ -4572,7 +4579,7 @@ void StyledWriter::writeArrayValue(const Value& value) {
writeWithIndent("[");
indent();
bool hasChildValue = !childValues_.empty();
unsigned index = 0;
ArrayIndex index = 0;
for (;;) {
const Value& childValue = value[index];
writeCommentBeforeValue(childValue);
@@ -4595,7 +4602,7 @@ void StyledWriter::writeArrayValue(const Value& value) {
{
assert(childValues_.size() == size);
document_ += "[ ";
for (unsigned index = 0; index < size; ++index) {
for (size_t index = 0; index < size; ++index) {
if (index > 0)
document_ += ", ";
document_ += childValues_[index];
@@ -4740,7 +4747,7 @@ void StyledStreamWriter::writeValue(const Value& value) {
char const* end;
bool ok = value.getString(&str, &end);
if (ok)
pushValue(valueToQuotedStringN(str, static_cast<unsigned>(end - str)));
pushValue(valueToQuotedStringN(str, static_cast<size_t>(end - str)));
else
pushValue("");
break;
@@ -5014,8 +5021,8 @@ void BuiltStyledStreamWriter::writeValue(Value const& value) {
char const* end;
bool ok = value.getString(&str, &end);
if (ok)
pushValue(valueToQuotedStringN(str, static_cast<unsigned>(end - str),
emitUTF8_));
pushValue(
valueToQuotedStringN(str, static_cast<size_t>(end - str), emitUTF8_));
else
pushValue("");
break;
@@ -5038,8 +5045,8 @@ void BuiltStyledStreamWriter::writeValue(Value const& value) {
String const& name = *it;
Value const& childValue = value[name];
writeCommentBeforeValue(childValue);
writeWithIndent(valueToQuotedStringN(
name.data(), static_cast<unsigned>(name.length()), emitUTF8_));
writeWithIndent(
valueToQuotedStringN(name.data(), name.length(), emitUTF8_));
*sout_ << colonSymbol_;
writeValue(childValue);
if (++it == members.end()) {
@@ -5273,7 +5280,7 @@ bool StreamWriterBuilder::validate(Json::Value* invalid) const {
if (valid_keys.count(key))
continue;
if (invalid)
(*invalid)[std::move(key)] = *si;
(*invalid)[key] = *si;
else
return false;
}

View File

@@ -59,7 +59,7 @@ To modify settings specific to the current application, invoke the `Properties`
When console applications are launched, the Windows Console Host determines which settings to use by overlaying settings from the above locations.
1. Initialize settings based on hardcoded defaults
1. Initialize settings based on hard-coded defaults
2. Overlay settings specified by the user's configured defaults
3. Overlay application-specific settings from either the registry or the shortcut file, depending on how the application was launched

View File

@@ -380,7 +380,7 @@ Here's the AppxManifest we're using:
</Properties>
<Dependencies>
<TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.22000.0" />
<TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.22621.0" />
<PackageDependency Name="Microsoft.VCLibs.140.00.Debug" MinVersion="14.0.27023.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
<PackageDependency Name="Microsoft.VCLibs.140.00.Debug.UWPDesktop" MinVersion="14.0.27027.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
</Dependencies>
@@ -517,7 +517,7 @@ This is because of a few key lines we already put in the appxmanifest:
```xml
<Dependencies>
<TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.22000.0" />
<TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.22621.0" />
<PackageDependency Name="Microsoft.VCLibs.140.00.Debug" MinVersion="14.0.27023.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
<PackageDependency Name="Microsoft.VCLibs.140.00.Debug.UWPDesktop" MinVersion="14.0.27027.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
</Dependencies>

View File

@@ -203,7 +203,7 @@
},
"intenseTextStyle": {
"default": "bright",
"description": "Controls how 'intense' text is rendered. Values are \"bold\", \"bright\", \"all\" and \"none\"",
"description": "Controls how 'intense' text is rendered when unfocused. Values are \"bold\", \"bright\", \"all\" and \"none\"",
"enum": [
"none",
"bold",
@@ -244,7 +244,7 @@
"default": 12,
"description": "Size of the font in points.",
"minimum": 1,
"type": "integer"
"type": "number"
},
"weight": {
"default": "normal",
@@ -2237,10 +2237,10 @@
"description": "Use to set a path to a pixel shader to use with the Terminal. Overrides `experimental.retroTerminalEffect`. This is an experimental feature, and its continued existence is not guaranteed.",
"type": "string"
},
"experimental.useAtlasEngine": {
"description": "Enable using the experimental new rendering engine for this profile. This is an experimental feature, and its continued existence is not guaranteed.",
"useAtlasEngine": {
"description": "Windows Terminal 1.16 and later ship with a new, performant text renderer. Set this to false to revert back to the old text renderer.",
"type": "boolean",
"default": false
"default": true
},
"fontFace": {
"default": "Cascadia Mono",
@@ -2252,7 +2252,7 @@
"default": 12,
"description": "[deprecated] Define 'size' within the 'font' object instead.",
"minimum": 1,
"type": "integer",
"type": "number",
"deprecated": true
},
"fontWeight": {
@@ -2283,6 +2283,17 @@
],
"deprecated": true
},
"intenseTextStyle": {
"default": "bright",
"description": "Controls how 'intense' text is rendered. Values are \"bold\", \"bright\", \"all\" and \"none\"",
"enum": [
"none",
"bold",
"bright",
"all"
],
"type": "string"
},
"foreground": {
"$ref": "#/$defs/Color",
"default": "#cccccc",
@@ -2350,7 +2361,8 @@
"description": "Defines the visibility of the scrollbar.",
"enum": [
"visible",
"hidden"
"hidden",
"always"
],
"type": "string"
},
@@ -2384,7 +2396,10 @@
},
"startingDirectory": {
"description": "The directory the shell starts in when it is loaded.",
"type": "string"
"type": [
"string",
"null"
]
},
"suppressApplicationTitle": {
"description": "When set to true, tabTitle overrides the default title of the tab and any title change messages from the application will be suppressed. When set to false, tabTitle behaves as normal.",

View File

@@ -1,7 +1,7 @@
---
author: Mike Griese @zadjii-msft
created on: 2020-5-13
last updated: 2020-08-04
last updated: 2022-11-18
issue id: 1571
---
@@ -76,6 +76,34 @@ There are five `type`s of objects in this menu:
- The `"entries"` property specifies a list of menu entries that will appear
nested under this entry. This can contain other `"type":"folder"` groups as
well!
- The `"inline"` property accepts two values
- `auto`: When the folder only has one entry in it, don't actually create a
nested layer to then menu. Just place the single entry in the layer that
folder would occupy. (Useful for dynamic profile sources with only a
single entry).
- `never`: (**default**) Always create a nested entry, even for a single
sub-item.
- The `allowEmpty` property will force this entry to show up in the menu, even
if it doesn't have any profiles in it. This defaults to `false`, meaning
that folders without any entries in them will just be ignored when
generating the menu. This will be more useful with the `matchProfile` entry,
below.
When this is true, and the folder is empty, we should add a
placeholder `<empty>` entry to the menu, to indicate that no profiles were
in that folder.
- _This setting is probably pretty niche, and not a requirement_. More of a
theoretical suggestion than anything.
- In the case of no entries for this folder, we should make sure to also
reflect the `inline` property:
- `allowEmpty:true`, `inline:auto`: just ignore the entry at all. Don't
add a placeholder to the parent list.
- `allowEmpty:true`, `inline:never`: Add a nested entry, with an
`<empty>` placeholder.
- `allowEmpty:false`, `inline:auto`: just ignore the entry at all. Don't
add a placeholder to the parent list.
- `allowEmpty:false`, `inline:never`: just ignore the entry at all. Don't
add a placeholder to the parent list.
* `"type":"action"`: This represents a menu entry that should execute a specific
`ShortcutAction`.
- the `id` property will specify the global action ID (see [#6899], [#7175])
@@ -97,6 +125,16 @@ There are five `type`s of objects in this menu:
enabling all other profiles to also be accessible.
- The "name" of these entries will simply be the name of the profile
- The "icon" of these entries will simply be the profile's icon
- This won't include any profiles that have been included via `matchProfile`
entries (below)
* `"type": "matchProfile"`: Expands to all the profiles that match a given
string. This lets the user easily specify a whole collection of profiles for a
folder, without needing to add them all manually.
- `"name"`, `"commandline"` or `"source"`: These three properties are used to
filter the list of profiles, based on the matching property in the profile
itself. The value is a string to compare with the corresponding property in
the profile. A full string comparison is done - not a regex or partial
string match.
The "default" new tab menu could be imagined as the following blob of json:
@@ -108,6 +146,42 @@ The "default" new tab menu could be imagined as the following blob of json:
}
```
Alternatively, we could consider something like the following. This would place
CMD, PowerShell, and all PowerShell cores in the root at the top, followed by
nested entries for each subsequent dynamic profile generator.
```jsonc
{
"newTabMenu": [
{ "type":"profile", "profile": "cmd" },
{ "type":"profile", "profile": "Windows PowerShell" },
{ "type": "matchProfile", "source": "Microsoft.Terminal.PowerShellCore" }
{
"type": "folder",
"name": "WSL",
"entries": [ { "type": "matchProfile", "source": "Microsoft.Terminal.Wsl" } ]
},
{
"type": "folder",
"name": "Visual Studio",
"entries": [ { "type": "matchProfile", "source": "Microsoft.Terminal.VisualStudio" } ]
},
// ... etc for other profile generators
{ "type": "remainingProfiles" }
]
}
```
I might only recommend that for `userDefaults.json`, which is the json files
used as a template for a user's new settings file. This would prevent us from
moving the user's cheese too much, if they're already using the Terminal and
happy with their list as is. Especially consider someone who's default profile
is a WSL distro, which would now need two clicks to get to.
> _note_: We will also want to support the same `{ "key": "SomeResourceString"}`
> syntax used by the Command Palette commands
> for specifying localizable names, if we chose to pursue this route.
### Other considerations
Also considered during the investigation for this feature was re-using the list
@@ -154,6 +228,42 @@ The design chosen in this spec more cleanly separates the responsibilities of
the list of profiles and the contents of the new tab menu. This way, each object
can be defined independent of the structure of the other.
Regarding implementation of `matchProfile` entries: In order to build the menu,
we'll evaluate the entries in the following order:
* all explicit `profile` entries
* then all `matchProfile` entries, using profiles not already specified
* then expand out `remainingProfiles` with anything not found above.
As an example:
```jsonc
{
"newTabMenu": [
{ "type": "matchProfile", "source": "Microsoft.Terminal.Wsl" }
{
"type": "folder",
"name": "WSLs",
"entries": [ { "type": "matchProfile", "source": "Microsoft.Terminal.Wsl" } ]
},
{ "type": "remainingProfiles" }
]
}
```
For profiles { "Profile A", "Profile B (WSL)", "Profile C (WSL)" }, This would
expand to:
```
New Tab Button ▽
├─ Profile A
├─ Profile B (WSL)
├─ Profile C (WSL)
└─ WSLs
└─ Profile B (WSL)
└─ Profile C (WSL)
```
## UI/UX Design
See the above _figure 1_.
@@ -289,7 +399,39 @@ And assuming the user has bound:
- Close Tab: `{ "action": "closeTab", "index": "${selectedTab.index}" }`
- Close Other Tabs: `{ "action": "closeTabs", "otherThan": "${selectedTab.index}" }`
- Close Tabs to the Right: `{ "action": "closeTabs", "after": "${selectedTab.index}" }`
* We may want to consider regex, tag-based, or some other type of matching for
`matchProfile` entries in the future. We originally considered using regex for
`matchProfile` by default, but decided instead on full string matches to leave
room for regex matching in the future. Should we chose to pursue something
like that, we should use a settings structure like:
```json
"type": "profileMatch",
"source": { "type": "regex", "value": ".*wsl.*" }
```
* We may want to expand `matchProfile` to match on other properties too. (`title`?)
* We may want to consider adding support for capture groups, e.g.
```json
{
"type": "profileMatch",
"name": { "type": "regex", "value": "^ssh: (.*)" }
}
```
for matching to all your `ssh: ` profiles, but populate the name in the entry
with that first capture group. So, ["ssh: foo", "ssh: bar"] would just expand
to a "foo" and "bar" entry.
## Updates
_February 2022_: Doc updated in response to some discussion in [#11326] and
[#7774]. In those PRs, it became clear that there needs to be a simple way of
collecting up a whole group of profiles automatically for sorting in these
menus. Although discussion centered on how hard it would be for extensions to
provide that customization themselves, the `match` statement was added as a way
to allow the user to easily filter those profiles themselves.
This was something we had originally considered as a "future consideration", but
ultimately deemed it to be out of scope for the initial spec review.
<!-- Footnotes -->
[#2046]: https://github.com/microsoft/terminal/issues/2046
@@ -298,3 +440,5 @@ And assuming the user has bound:
[#3337]: https://github.com/microsoft/terminal/issues/3337
[#6899]: https://github.com/microsoft/terminal/issues/6899
[#7175]: https://github.com/microsoft/terminal/issues/7175
[#11326]: https://github.com/microsoft/terminal/issues/11326
[#7774]: https://github.com/microsoft/terminal/issues/7774

View File

@@ -201,7 +201,7 @@ Concerns:
### Accessibility
Accessibility applications are the most likely to resort to a method of spelunking the process tree or window handles to attempt to find content to read out. Presuming they have hardcoded rules for console-type applications, these algorithms could be surprised by the substitution of another terminal environment.
Accessibility applications are the most likely to resort to a method of spelunking the process tree or window handles to attempt to find content to read out. Presuming they have hard-coded rules for console-type applications, these algorithms could be surprised by the substitution of another terminal environment.
The major players here that I am considering are NVDA, JAWS, and Narrator. As far as I am aware, all of these applications attempt to drive their interactivity through UI Automation where possible. And we have worked with all of these applications in the past in improving their support for both `conhost.exe` and the Windows Terminal product. I have relatively high confidence that we will be able to work with them again to help update these assistive products to understand the new UI delegation, if necessary.

View File

@@ -76,7 +76,7 @@ These are in accordance with ConHost's keyboard selection model.
This idea was abandoned due to several reasons:
1. Keyboard selection should be a standard way to interact with a terminal across all consumers (i.e. WPF control, etc.)
2. There isn't really another set of key bindings that makes sense for this. We already hardcoded <kbd>ESC</kbd> as a way to clear the selection. This is just an extension of that.
2. There isn't really another set of key bindings that makes sense for this. We already hard-coded <kbd>ESC</kbd> as a way to clear the selection. This is just an extension of that.
3. Adding 12 conditionally effective key bindings takes the spot of 12 potential non-conditional key bindings. It would be nice if a different key binding could be set when the selection is not active, but that makes the settings design much more complicated.
4. 12 new items in the command palette is also pretty excessive.
5. If proven wrong when this is in WT Preview, we can revisit this and make them customizable then. It's better to add the ability to customize it later than take it away.

View File

@@ -115,7 +115,7 @@ greater detail below:
### Default Settings
We'll have a static version of the "Default" file **hardcoded within the
We'll have a static version of the "Default" file **hard-coded within the
application package**. This `defaults.json` file will live within the
application's package, which will prevent users from being able to edit it.
@@ -128,19 +128,19 @@ won't actually be generated, but because it's shipped with our app, it'll be
overridden each time the app is updated. "Auto-generated" should be good enough
to indicate to users that it should not be modified.
Because the `defaults.json` file is hardcoded within our application, we can use
Because the `defaults.json` file is hard-coded within our application, we can use
its text directly, without loading the file from disk. This should help save
some startup time, as we'll only need to load the user settings from disk.
When we make changes to the default settings, or we make changes to the settings
schema, we should make sure that we update the hardcoded `defaults.json` with
schema, we should make sure that we update the hard-coded `defaults.json` with
the new values. That way, the `defaults.json` file will always have the complete
set of settings in it.
### Layering settings
When we load the settings, we'll do it in three stages. First, we'll deserialize
the default settings that we've hardcoded. We'll then generate any profiles that
the default settings that we've hard-coded. We'll then generate any profiles that
might come from dynamic profile sources. Then, we'll intelligently layer the
user's setting upon those we've already loaded. If a user wants to make changes
to some objects, like the default profiles, we'll need to make sure to load from

View File

@@ -158,7 +158,7 @@ For `settings.json`, `_globals` will only hold the values set in `settings.json`
This process becomes a bit more complex for `Profile` because it can fallback in the following order:
1. `settings.json` profile
2. `settings.json` `profiles.defaults`
3. (if a dynamic profile) the hardcoded value in the dynamic profile generator
3. (if a dynamic profile) the hard-coded value in the dynamic profile generator
4. `defaults.json` profile
`CascadiaSettings` must do the following...
@@ -280,7 +280,7 @@ TerminalApp will construct and reference a `CascadiaSettings settings` as follow
and layers the settings.json data on top of it.
- check for errors/warnings, and handle them appropriately
This will be different from the current model which has the settings.json path hardcoded, and is simplified
This will be different from the current model which has the settings.json path hard-coded, and is simplified
to a `LoadAll()` call wrapped in error handlers.
**NOTE:** This model allows us to layer even more settings files on top of the existing Terminal Settings

View File

@@ -1,15 +0,0 @@
### Notes for Future Maintainers
This was originally imported by @Austin-Lamb in December 2020.
The provenance information (where it came from and which commit) is stored in the file `cgmanifest.json` in the same directory as this readme.
Please update the provenance information in that file when ingesting an updated version of the dependent library.
That provenance file is automatically read and inventoried by Microsoft systems to ensure compliance with appropriate governance standards.
## What should be done to update this in the future?
1. Download the version of boost you want from boost.org.
2. Take the parts you want, but leave most of it behind since it's HUGE and will bloat the repo to take it all. At the time of this writing, we only use small_vector.hpp and its dependencies as a header-only library.
3. Validate that the license in the root of the repository didn't change and update it if so. It is sitting in a version-specific subdirectory below this readme.
If it changed dramatically, ensure that it is still compatible with our license scheme. Also update the NOTICE file in the root of our repository to declare the third-party usage.
4. Submit the pull.

View File

@@ -1,23 +0,0 @@
Boost Software License - Version 1.0 - August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization
obtaining a copy of the software and accompanying documentation covered by
this license (the "Software") to use, reproduce, display, distribute,
execute, and transmit the Software, and to prepare derivative works of the
Software, and to permit third-parties to whom the Software is furnished to
do so, all subject to the following:
The copyright notices in the Software and this entire statement, including
the above license grant, this restriction and the following disclaimer,
must be included in all copies of the Software, in whole or in part, and
all derivative works of the Software, unless such copies or derivative
works are solely in the form of machine-executable object code generated by
a source language processor.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.

View File

@@ -1,11 +0,0 @@
# Boost C++ Libraries
The Boost project provides free peer-reviewed portable C++ source libraries.
We emphasize libraries that work well with the C++ Standard Library. Boost
libraries are intended to be widely useful, and usable across a broad spectrum
of applications. The Boost license encourages both commercial and non-commercial use
and does not require attribution for binary use.
The project website is www.boost.org, where you can obtain more information and
[download](https://www.boost.org/users/download/) the current release.

View File

@@ -1,85 +0,0 @@
//
// boost/assert.hpp - BOOST_ASSERT(expr)
// BOOST_ASSERT_MSG(expr, msg)
// BOOST_VERIFY(expr)
// BOOST_VERIFY_MSG(expr, msg)
// BOOST_ASSERT_IS_VOID
//
// Copyright (c) 2001, 2002 Peter Dimov and Multi Media Ltd.
// Copyright (c) 2007, 2014 Peter Dimov
// Copyright (c) Beman Dawes 2011
// Copyright (c) 2015 Ion Gaztanaga
//
// Distributed under the Boost Software License, Version 1.0.
// See accompanying file LICENSE_1_0.txt or copy at
// http://www.boost.org/LICENSE_1_0.txt
//
// Note: There are no include guards. This is intentional.
//
// See http://www.boost.org/libs/assert/assert.html for documentation.
//
//
// Stop inspect complaining about use of 'assert':
//
// boostinspect:naassert_macro
//
//
// BOOST_ASSERT, BOOST_ASSERT_MSG, BOOST_ASSERT_IS_VOID
//
#undef BOOST_ASSERT
#undef BOOST_ASSERT_MSG
#undef BOOST_ASSERT_IS_VOID
#if defined(BOOST_DISABLE_ASSERTS) || ( defined(BOOST_ENABLE_ASSERT_DEBUG_HANDLER) && defined(NDEBUG) )
# define BOOST_ASSERT(expr) ((void)0)
# define BOOST_ASSERT_MSG(expr, msg) ((void)0)
# define BOOST_ASSERT_IS_VOID
#elif defined(BOOST_ENABLE_ASSERT_HANDLER) || ( defined(BOOST_ENABLE_ASSERT_DEBUG_HANDLER) && !defined(NDEBUG) )
#include <boost/config.hpp> // for BOOST_LIKELY
#include <boost/current_function.hpp>
namespace boost
{
void assertion_failed(char const * expr, char const * function, char const * file, long line); // user defined
void assertion_failed_msg(char const * expr, char const * msg, char const * function, char const * file, long line); // user defined
} // namespace boost
#define BOOST_ASSERT(expr) (BOOST_LIKELY(!!(expr))? ((void)0): ::boost::assertion_failed(#expr, BOOST_CURRENT_FUNCTION, __FILE__, __LINE__))
#define BOOST_ASSERT_MSG(expr, msg) (BOOST_LIKELY(!!(expr))? ((void)0): ::boost::assertion_failed_msg(#expr, msg, BOOST_CURRENT_FUNCTION, __FILE__, __LINE__))
#else
# include <assert.h> // .h to support old libraries w/o <cassert> - effect is the same
# define BOOST_ASSERT(expr) assert(expr)
# define BOOST_ASSERT_MSG(expr, msg) assert((expr)&&(msg))
#if defined(NDEBUG)
# define BOOST_ASSERT_IS_VOID
#endif
#endif
//
// BOOST_VERIFY, BOOST_VERIFY_MSG
//
#undef BOOST_VERIFY
#undef BOOST_VERIFY_MSG
#if defined(BOOST_DISABLE_ASSERTS) || ( !defined(BOOST_ENABLE_ASSERT_HANDLER) && defined(NDEBUG) )
# define BOOST_VERIFY(expr) ((void)(expr))
# define BOOST_VERIFY_MSG(expr, msg) ((void)(expr))
#else
# define BOOST_VERIFY(expr) BOOST_ASSERT(expr)
# define BOOST_VERIFY_MSG(expr, msg) BOOST_ASSERT_MSG(expr,msg)
#endif

View File

@@ -1,67 +0,0 @@
// Boost config.hpp configuration header file ------------------------------//
// (C) Copyright John Maddock 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org/libs/config for most recent version.
// Boost config.hpp policy and rationale documentation has been moved to
// http://www.boost.org/libs/config
//
// CAUTION: This file is intended to be completely stable -
// DO NOT MODIFY THIS FILE!
//
#ifndef BOOST_CONFIG_HPP
#define BOOST_CONFIG_HPP
// if we don't have a user config, then use the default location:
#if !defined(BOOST_USER_CONFIG) && !defined(BOOST_NO_USER_CONFIG)
# define BOOST_USER_CONFIG <boost/config/user.hpp>
#if 0
// For dependency trackers:
# include <boost/config/user.hpp>
#endif
#endif
// include it first:
#ifdef BOOST_USER_CONFIG
# include BOOST_USER_CONFIG
#endif
// if we don't have a compiler config set, try and find one:
#if !defined(BOOST_COMPILER_CONFIG) && !defined(BOOST_NO_COMPILER_CONFIG) && !defined(BOOST_NO_CONFIG)
# include <boost/config/detail/select_compiler_config.hpp>
#endif
// if we have a compiler config, include it now:
#ifdef BOOST_COMPILER_CONFIG
# include BOOST_COMPILER_CONFIG
#endif
// if we don't have a std library config set, try and find one:
#if !defined(BOOST_STDLIB_CONFIG) && !defined(BOOST_NO_STDLIB_CONFIG) && !defined(BOOST_NO_CONFIG) && defined(__cplusplus)
# include <boost/config/detail/select_stdlib_config.hpp>
#endif
// if we have a std library config, include it now:
#ifdef BOOST_STDLIB_CONFIG
# include BOOST_STDLIB_CONFIG
#endif
// if we don't have a platform config set, try and find one:
#if !defined(BOOST_PLATFORM_CONFIG) && !defined(BOOST_NO_PLATFORM_CONFIG) && !defined(BOOST_NO_CONFIG)
# include <boost/config/detail/select_platform_config.hpp>
#endif
// if we have a platform config, include it now:
#ifdef BOOST_PLATFORM_CONFIG
# include BOOST_PLATFORM_CONFIG
#endif
// get config suffix code:
#include <boost/config/detail/suffix.hpp>
#ifdef BOOST_HAS_PRAGMA_ONCE
#pragma once
#endif
#endif // BOOST_CONFIG_HPP

View File

@@ -1,27 +0,0 @@
// (C) Copyright John Maddock 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// for C++ Builder the following options effect the ABI:
//
// -b (on or off - effect emum sizes)
// -Vx (on or off - empty members)
// -Ve (on or off - empty base classes)
// -aX (alignment - 5 options).
// -pX (Calling convention - 4 options)
// -VmX (member pointer size and layout - 5 options)
// -VC (on or off, changes name mangling)
// -Vl (on or off, changes struct layout).
// In addition the following warnings are sufficiently annoying (and
// unfixable) to have them turned off by default:
//
// 8027 - functions containing [for|while] loops are not expanded inline
// 8026 - functions taking class by value arguments are not expanded inline
#pragma nopushoptwarn
# pragma option push -a8 -Vx- -Ve- -b- -pc -Vmv -VC- -Vl- -w-8027 -w-8026

View File

@@ -1,12 +0,0 @@
// (C) Copyright John Maddock 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
# pragma option pop
#pragma nopushoptwarn

View File

@@ -1,22 +0,0 @@
// (C) Copyright John Maddock 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
//
// Boost binaries are built with the compiler's default ABI settings,
// if the user changes their default alignment in the VS IDE then their
// code will no longer be binary compatible with the bjam built binaries
// unless this header is included to force Boost code into a consistent ABI.
//
// Note that inclusion of this header is only necessary for libraries with
// separate source, header only libraries DO NOT need this as long as all
// translation units are built with the same options.
//
#if defined(_M_X64)
# pragma pack(push,16)
#else
# pragma pack(push,8)
#endif

View File

@@ -1,8 +0,0 @@
// (C) Copyright John Maddock 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
#pragma pack(pop)

View File

@@ -1,25 +0,0 @@
// abi_prefix header -------------------------------------------------------//
// (c) Copyright John Maddock 2003
// Use, modification and distribution are subject to the Boost Software License,
// Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at
// http://www.boost.org/LICENSE_1_0.txt).
#ifndef BOOST_CONFIG_ABI_PREFIX_HPP
# define BOOST_CONFIG_ABI_PREFIX_HPP
#else
# error double inclusion of header boost/config/abi_prefix.hpp is an error
#endif
#include <boost/config.hpp>
// this must occur after all other includes and before any code appears:
#ifdef BOOST_HAS_ABI_HEADERS
# include BOOST_ABI_PREFIX
#endif
#if defined( __BORLANDC__ )
#pragma nopushoptwarn
#endif

View File

@@ -1,27 +0,0 @@
// abi_sufffix header -------------------------------------------------------//
// (c) Copyright John Maddock 2003
// Use, modification and distribution are subject to the Boost Software License,
// Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at
// http://www.boost.org/LICENSE_1_0.txt).
// This header should be #included AFTER code that was preceded by a #include
// <boost/config/abi_prefix.hpp>.
#ifndef BOOST_CONFIG_ABI_PREFIX_HPP
# error Header boost/config/abi_suffix.hpp must only be used after boost/config/abi_prefix.hpp
#else
# undef BOOST_CONFIG_ABI_PREFIX_HPP
#endif
// the suffix header occurs after all of our code:
#ifdef BOOST_HAS_ABI_HEADERS
# include BOOST_ABI_SUFFIX
#endif
#if defined( __BORLANDC__ )
#pragma nopushoptwarn
#endif

View File

@@ -1,485 +0,0 @@
// (C) Copyright John Maddock 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
/*
* LOCATION: see http://www.boost.org for most recent version.
* FILE auto_link.hpp
* VERSION see <boost/version.hpp>
* DESCRIPTION: Automatic library inclusion for Borland/Microsoft compilers.
*/
/*************************************************************************
USAGE:
~~~~~~
Before including this header you must define one or more of define the following macros:
BOOST_LIB_NAME: Required: A string containing the basename of the library,
for example boost_regex.
BOOST_LIB_TOOLSET: Optional: the base name of the toolset.
BOOST_DYN_LINK: Optional: when set link to dll rather than static library.
BOOST_LIB_DIAGNOSTIC: Optional: when set the header will print out the name
of the library selected (useful for debugging).
BOOST_AUTO_LINK_NOMANGLE: Specifies that we should link to BOOST_LIB_NAME.lib,
rather than a mangled-name version.
BOOST_AUTO_LINK_TAGGED: Specifies that we link to libraries built with the --layout=tagged option.
This is essentially the same as the default name-mangled version, but without
the compiler name and version, or the Boost version. Just the build options.
BOOST_AUTO_LINK_SYSTEM: Specifies that we link to libraries built with the --layout=system option.
This is essentially the same as the non-name-mangled version, but with
the prefix to differentiate static and dll builds
These macros will be undef'ed at the end of the header, further this header
has no include guards - so be sure to include it only once from your library!
Algorithm:
~~~~~~~~~~
Libraries for Borland and Microsoft compilers are automatically
selected here, the name of the lib is selected according to the following
formula:
BOOST_LIB_PREFIX
+ BOOST_LIB_NAME
+ "_"
+ BOOST_LIB_TOOLSET
+ BOOST_LIB_THREAD_OPT
+ BOOST_LIB_RT_OPT
+ BOOST_LIB_ARCH_AND_MODEL_OPT
"-"
+ BOOST_LIB_VERSION
These are defined as:
BOOST_LIB_PREFIX: "lib" for static libraries otherwise "".
BOOST_LIB_NAME: The base name of the lib ( for example boost_regex).
BOOST_LIB_TOOLSET: The compiler toolset name (vc6, vc7, bcb5 etc).
BOOST_LIB_THREAD_OPT: "-mt" for multithread builds, otherwise nothing.
BOOST_LIB_RT_OPT: A suffix that indicates the runtime library used,
contains one or more of the following letters after
a hyphen:
s static runtime (dynamic if not present).
g debug/diagnostic runtime (release if not present).
y Python debug/diagnostic runtime (release if not present).
d debug build (release if not present).
p STLport build.
n STLport build without its IOStreams.
BOOST_LIB_ARCH_AND_MODEL_OPT: The architecture and address model
(-x32 or -x64 for x86/32 and x86/64 respectively)
BOOST_LIB_VERSION: The Boost version, in the form x_y, for Boost version x.y.
***************************************************************************/
#ifdef __cplusplus
# ifndef BOOST_CONFIG_HPP
# include <boost/config.hpp>
# endif
#elif defined(_MSC_VER) && !defined(__MWERKS__) && !defined(__EDG_VERSION__)
//
// C language compatability (no, honestly)
//
# define BOOST_MSVC _MSC_VER
# define BOOST_STRINGIZE(X) BOOST_DO_STRINGIZE(X)
# define BOOST_DO_STRINGIZE(X) #X
#endif
//
// Only include what follows for known and supported compilers:
//
#if defined(BOOST_MSVC) \
|| defined(__BORLANDC__) \
|| (defined(__MWERKS__) && defined(_WIN32) && (__MWERKS__ >= 0x3000)) \
|| (defined(__ICL) && defined(_MSC_EXTENSIONS) && (_MSC_VER >= 1200)) \
|| (defined(BOOST_CLANG) && defined(BOOST_WINDOWS) && defined(_MSC_VER) && (__clang_major__ >= 4))
#ifndef BOOST_VERSION_HPP
# include <boost/version.hpp>
#endif
#ifndef BOOST_LIB_NAME
# error "Macro BOOST_LIB_NAME not set (internal error)"
#endif
//
// error check:
//
#if defined(__MSVC_RUNTIME_CHECKS) && !defined(_DEBUG)
# pragma message("Using the /RTC option without specifying a debug runtime will lead to linker errors")
# pragma message("Hint: go to the code generation options and switch to one of the debugging runtimes")
# error "Incompatible build options"
#endif
//
// select toolset if not defined already:
//
#ifndef BOOST_LIB_TOOLSET
# if defined(BOOST_MSVC) && (BOOST_MSVC < 1200)
// Note: no compilers before 1200 are supported
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1300)
# ifdef UNDER_CE
// eVC4:
# define BOOST_LIB_TOOLSET "evc4"
# else
// vc6:
# define BOOST_LIB_TOOLSET "vc6"
# endif
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1310)
// vc7:
# define BOOST_LIB_TOOLSET "vc7"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1400)
// vc71:
# define BOOST_LIB_TOOLSET "vc71"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1500)
// vc80:
# define BOOST_LIB_TOOLSET "vc80"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1600)
// vc90:
# define BOOST_LIB_TOOLSET "vc90"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1700)
// vc10:
# define BOOST_LIB_TOOLSET "vc100"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1800)
// vc11:
# define BOOST_LIB_TOOLSET "vc110"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1900)
// vc12:
# define BOOST_LIB_TOOLSET "vc120"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1910)
// vc14:
# define BOOST_LIB_TOOLSET "vc140"
# elif defined(BOOST_MSVC) && (BOOST_MSVC < 1920)
// vc14.1:
# define BOOST_LIB_TOOLSET "vc141"
# elif defined(BOOST_MSVC)
// vc14.2:
# define BOOST_LIB_TOOLSET "vc142"
# elif defined(__BORLANDC__)
// CBuilder 6:
# define BOOST_LIB_TOOLSET "bcb"
# elif defined(__ICL)
// Intel C++, no version number:
# define BOOST_LIB_TOOLSET "iw"
# elif defined(__MWERKS__) && (__MWERKS__ <= 0x31FF )
// Metrowerks CodeWarrior 8.x
# define BOOST_LIB_TOOLSET "cw8"
# elif defined(__MWERKS__) && (__MWERKS__ <= 0x32FF )
// Metrowerks CodeWarrior 9.x
# define BOOST_LIB_TOOLSET "cw9"
# elif defined(BOOST_CLANG) && defined(BOOST_WINDOWS) && defined(_MSC_VER) && (__clang_major__ >= 4)
// Clang on Windows
# define BOOST_LIB_TOOLSET "clangw" BOOST_STRINGIZE(__clang_major__)
# endif
#endif // BOOST_LIB_TOOLSET
//
// select thread opt:
//
#if defined(_MT) || defined(__MT__)
# define BOOST_LIB_THREAD_OPT "-mt"
#else
# define BOOST_LIB_THREAD_OPT
#endif
#if defined(_MSC_VER) || defined(__MWERKS__)
# ifdef _DLL
# if (defined(__SGI_STL_PORT) || defined(_STLPORT_VERSION)) && (defined(_STLP_OWN_IOSTREAMS) || defined(__STL_OWN_IOSTREAMS))
# if defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-gydp"
# elif defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))
# define BOOST_LIB_RT_OPT "-gdp"
# elif defined(_DEBUG)\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-gydp"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# elif defined(_DEBUG)
# define BOOST_LIB_RT_OPT "-gdp"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# else
# define BOOST_LIB_RT_OPT "-p"
# endif
# elif defined(__SGI_STL_PORT) || defined(_STLPORT_VERSION)
# if defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-gydpn"
# elif defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))
# define BOOST_LIB_RT_OPT "-gdpn"
# elif defined(_DEBUG)\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-gydpn"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# elif defined(_DEBUG)
# define BOOST_LIB_RT_OPT "-gdpn"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# else
# define BOOST_LIB_RT_OPT "-pn"
# endif
# else
# if defined(_DEBUG) && defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-gyd"
# elif defined(_DEBUG)
# define BOOST_LIB_RT_OPT "-gd"
# else
# define BOOST_LIB_RT_OPT
# endif
# endif
# else
# if (defined(__SGI_STL_PORT) || defined(_STLPORT_VERSION)) && (defined(_STLP_OWN_IOSTREAMS) || defined(__STL_OWN_IOSTREAMS))
# if defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-sgydp"
# elif defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))
# define BOOST_LIB_RT_OPT "-sgdp"
# elif defined(_DEBUG)\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-sgydp"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# elif defined(_DEBUG)
# define BOOST_LIB_RT_OPT "-sgdp"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# else
# define BOOST_LIB_RT_OPT "-sp"
# endif
# elif defined(__SGI_STL_PORT) || defined(_STLPORT_VERSION)
# if defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-sgydpn"
# elif defined(_DEBUG) && (defined(__STL_DEBUG) || defined(_STLP_DEBUG))
# define BOOST_LIB_RT_OPT "-sgdpn"
# elif defined(_DEBUG)\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-sgydpn"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# elif defined(_DEBUG)
# define BOOST_LIB_RT_OPT "-sgdpn"
# pragma message("warning: STLport debug versions are built with /D_STLP_DEBUG=1")
# error "Build options aren't compatible with pre-built libraries"
# else
# define BOOST_LIB_RT_OPT "-spn"
# endif
# else
# if defined(_DEBUG)\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-sgyd"
# elif defined(_DEBUG)
# define BOOST_LIB_RT_OPT "-sgd"
# else
# define BOOST_LIB_RT_OPT "-s"
# endif
# endif
# endif
#elif defined(__BORLANDC__)
//
// figure out whether we want the debug builds or not:
//
#if __BORLANDC__ > 0x561
#pragma defineonoption BOOST_BORLAND_DEBUG -v
#endif
//
// sanity check:
//
#if defined(__STL_DEBUG) || defined(_STLP_DEBUG)
#error "Pre-built versions of the Boost libraries are not provided in STLport-debug form"
#endif
# ifdef _RTLDLL
# if defined(BOOST_BORLAND_DEBUG)\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-yd"
# elif defined(BOOST_BORLAND_DEBUG)
# define BOOST_LIB_RT_OPT "-d"
# elif defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT -y
# else
# define BOOST_LIB_RT_OPT
# endif
# else
# if defined(BOOST_BORLAND_DEBUG)\
&& defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-syd"
# elif defined(BOOST_BORLAND_DEBUG)
# define BOOST_LIB_RT_OPT "-sd"
# elif defined(BOOST_DEBUG_PYTHON) && defined(BOOST_LINKING_PYTHON)
# define BOOST_LIB_RT_OPT "-sy"
# else
# define BOOST_LIB_RT_OPT "-s"
# endif
# endif
#endif
//
// BOOST_LIB_ARCH_AND_MODEL_OPT
//
#if defined( _M_IX86 )
# define BOOST_LIB_ARCH_AND_MODEL_OPT "-x32"
#elif defined( _M_X64 )
# define BOOST_LIB_ARCH_AND_MODEL_OPT "-x64"
#elif defined( _M_ARM )
# define BOOST_LIB_ARCH_AND_MODEL_OPT "-a32"
#elif defined( _M_ARM64 )
# define BOOST_LIB_ARCH_AND_MODEL_OPT "-a64"
#endif
//
// select linkage opt:
//
#if (defined(_DLL) || defined(_RTLDLL)) && defined(BOOST_DYN_LINK)
# define BOOST_LIB_PREFIX
#elif defined(BOOST_DYN_LINK)
# error "Mixing a dll boost library with a static runtime is a really bad idea..."
#else
# define BOOST_LIB_PREFIX "lib"
#endif
//
// now include the lib:
//
#if defined(BOOST_LIB_NAME) \
&& defined(BOOST_LIB_PREFIX) \
&& defined(BOOST_LIB_TOOLSET) \
&& defined(BOOST_LIB_THREAD_OPT) \
&& defined(BOOST_LIB_RT_OPT) \
&& defined(BOOST_LIB_ARCH_AND_MODEL_OPT) \
&& defined(BOOST_LIB_VERSION)
#ifdef BOOST_AUTO_LINK_TAGGED
# pragma comment(lib, BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) BOOST_LIB_THREAD_OPT BOOST_LIB_RT_OPT BOOST_LIB_ARCH_AND_MODEL_OPT ".lib")
# ifdef BOOST_LIB_DIAGNOSTIC
# pragma message ("Linking to lib file: " BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) BOOST_LIB_THREAD_OPT BOOST_LIB_RT_OPT BOOST_LIB_ARCH_AND_MODEL_OPT ".lib")
# endif
#elif defined(BOOST_AUTO_LINK_SYSTEM)
# pragma comment(lib, BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) ".lib")
# ifdef BOOST_LIB_DIAGNOSTIC
# pragma message ("Linking to lib file: " BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) ".lib")
# endif
#elif defined(BOOST_AUTO_LINK_NOMANGLE)
# pragma comment(lib, BOOST_STRINGIZE(BOOST_LIB_NAME) ".lib")
# ifdef BOOST_LIB_DIAGNOSTIC
# pragma message ("Linking to lib file: " BOOST_STRINGIZE(BOOST_LIB_NAME) ".lib")
# endif
#elif defined(BOOST_LIB_BUILDID)
# pragma comment(lib, BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) "-" BOOST_LIB_TOOLSET BOOST_LIB_THREAD_OPT BOOST_LIB_RT_OPT BOOST_LIB_ARCH_AND_MODEL_OPT "-" BOOST_LIB_VERSION "-" BOOST_STRINGIZE(BOOST_LIB_BUILDID) ".lib")
# ifdef BOOST_LIB_DIAGNOSTIC
# pragma message ("Linking to lib file: " BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) "-" BOOST_LIB_TOOLSET BOOST_LIB_THREAD_OPT BOOST_LIB_RT_OPT BOOST_LIB_ARCH_AND_MODEL_OPT "-" BOOST_LIB_VERSION "-" BOOST_STRINGIZE(BOOST_LIB_BUILDID) ".lib")
# endif
#else
# pragma comment(lib, BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) "-" BOOST_LIB_TOOLSET BOOST_LIB_THREAD_OPT BOOST_LIB_RT_OPT BOOST_LIB_ARCH_AND_MODEL_OPT "-" BOOST_LIB_VERSION ".lib")
# ifdef BOOST_LIB_DIAGNOSTIC
# pragma message ("Linking to lib file: " BOOST_LIB_PREFIX BOOST_STRINGIZE(BOOST_LIB_NAME) "-" BOOST_LIB_TOOLSET BOOST_LIB_THREAD_OPT BOOST_LIB_RT_OPT BOOST_LIB_ARCH_AND_MODEL_OPT "-" BOOST_LIB_VERSION ".lib")
# endif
#endif
#else
# error "some required macros where not defined (internal logic error)."
#endif
#endif // _MSC_VER || __BORLANDC__
//
// finally undef any macros we may have set:
//
#ifdef BOOST_LIB_PREFIX
# undef BOOST_LIB_PREFIX
#endif
#if defined(BOOST_LIB_NAME)
# undef BOOST_LIB_NAME
#endif
// Don't undef this one: it can be set by the user and should be the
// same for all libraries:
//#if defined(BOOST_LIB_TOOLSET)
//# undef BOOST_LIB_TOOLSET
//#endif
#if defined(BOOST_LIB_THREAD_OPT)
# undef BOOST_LIB_THREAD_OPT
#endif
#if defined(BOOST_LIB_RT_OPT)
# undef BOOST_LIB_RT_OPT
#endif
#if defined(BOOST_LIB_ARCH_AND_MODEL_OPT)
# undef BOOST_LIB_ARCH_AND_MODEL_OPT
#endif
#if defined(BOOST_LIB_LINK_OPT)
# undef BOOST_LIB_LINK_OPT
#endif
#if defined(BOOST_LIB_DEBUG_OPT)
# undef BOOST_LIB_DEBUG_OPT
#endif
#if defined(BOOST_DYN_LINK)
# undef BOOST_DYN_LINK
#endif

View File

@@ -1,336 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright David Abrahams 2002 - 2003.
// (C) Copyright Aleksey Gurtovoy 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Borland C++ compiler setup:
//
// versions check:
// we don't support Borland prior to version 5.4:
#if __BORLANDC__ < 0x540
# error "Compiler not supported or configured - please reconfigure"
#endif
// last known compiler version:
#if (__BORLANDC__ > 0x613)
//# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
//# else
//# pragma message( "boost: Unknown compiler version - please run the configure tests and report the results")
//# endif
#elif (__BORLANDC__ == 0x600)
# error "CBuilderX preview compiler is no longer supported"
#endif
//
// Support macros to help with standard library detection
#if (__BORLANDC__ < 0x560) || defined(_USE_OLD_RW_STL)
# define BOOST_BCB_WITH_ROGUE_WAVE
#elif __BORLANDC__ < 0x570
# define BOOST_BCB_WITH_STLPORT
#else
# define BOOST_BCB_WITH_DINKUMWARE
#endif
//
// Version 5.0 and below:
# if __BORLANDC__ <= 0x0550
// Borland C++Builder 4 and 5:
# define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
# if __BORLANDC__ == 0x0550
// Borland C++Builder 5, command-line compiler 5.5:
# define BOOST_NO_OPERATORS_IN_NAMESPACE
# endif
// Variadic macros do not exist for C++ Builder versions 5 and below
#define BOOST_NO_CXX11_VARIADIC_MACROS
# endif
// Version 5.51 and below:
#if (__BORLANDC__ <= 0x551)
# define BOOST_NO_CV_SPECIALIZATIONS
# define BOOST_NO_CV_VOID_SPECIALIZATIONS
# define BOOST_NO_DEDUCED_TYPENAME
// workaround for missing WCHAR_MAX/WCHAR_MIN:
#ifdef __cplusplus
#include <climits>
#include <cwchar>
#else
#include <limits.h>
#include <wchar.h>
#endif // __cplusplus
#ifndef WCHAR_MAX
# define WCHAR_MAX 0xffff
#endif
#ifndef WCHAR_MIN
# define WCHAR_MIN 0
#endif
#endif
// Borland C++ Builder 6 and below:
#if (__BORLANDC__ <= 0x564)
# if defined(NDEBUG) && defined(__cplusplus)
// fix broken <cstring> so that Boost.test works:
# include <cstring>
# undef strcmp
# endif
// fix broken errno declaration:
# include <errno.h>
# ifndef errno
# define errno errno
# endif
#endif
//
// new bug in 5.61:
#if (__BORLANDC__ >= 0x561) && (__BORLANDC__ <= 0x580)
// this seems to be needed by the command line compiler, but not the IDE:
# define BOOST_NO_MEMBER_FUNCTION_SPECIALIZATIONS
#endif
// Borland C++ Builder 2006 Update 2 and below:
#if (__BORLANDC__ <= 0x582)
# define BOOST_NO_SFINAE
# define BOOST_BCB_PARTIAL_SPECIALIZATION_BUG
# define BOOST_NO_TEMPLATE_TEMPLATES
# define BOOST_NO_PRIVATE_IN_AGGREGATE
# ifdef _WIN32
# define BOOST_NO_SWPRINTF
# elif defined(linux) || defined(__linux__) || defined(__linux)
// we should really be able to do without this
// but the wcs* functions aren't imported into std::
# define BOOST_NO_STDC_NAMESPACE
// _CPPUNWIND doesn't get automatically set for some reason:
# pragma defineonoption BOOST_CPPUNWIND -x
# endif
#endif
#if (__BORLANDC__ <= 0x613) // Beman has asked Alisdair for more info
// we shouldn't really need this - but too many things choke
// without it, this needs more investigation:
# define BOOST_NO_LIMITS_COMPILE_TIME_CONSTANTS
# define BOOST_NO_IS_ABSTRACT
# define BOOST_NO_FUNCTION_TYPE_SPECIALIZATIONS
# define BOOST_NO_USING_TEMPLATE
# define BOOST_SP_NO_SP_CONVERTIBLE
// Temporary workaround
#define BOOST_MPL_CFG_NO_PREPROCESSED_HEADERS
#endif
// Borland C++ Builder 2008 and below:
# define BOOST_NO_INTEGRAL_INT64_T
# define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
# define BOOST_NO_DEPENDENT_NESTED_DERIVATIONS
# define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
# define BOOST_NO_USING_DECLARATION_OVERLOADS_FROM_TYPENAME_BASE
# define BOOST_NO_NESTED_FRIENDSHIP
# define BOOST_NO_TYPENAME_WITH_CTOR
#if (__BORLANDC__ < 0x600)
# define BOOST_ILLEGAL_CV_REFERENCES
#endif
//
// Positive Feature detection
//
// Borland C++ Builder 2008 and below:
#if (__BORLANDC__ >= 0x599)
# pragma defineonoption BOOST_CODEGEAR_0X_SUPPORT -Ax
#endif
//
// C++0x Macros:
//
#if !defined( BOOST_CODEGEAR_0X_SUPPORT ) || (__BORLANDC__ < 0x610)
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_CHAR32_T
# define BOOST_NO_CXX11_DECLTYPE
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
# define BOOST_NO_CXX11_EXTERN_TEMPLATE
# define BOOST_NO_CXX11_RVALUE_REFERENCES
# define BOOST_NO_CXX11_SCOPED_ENUMS
# define BOOST_NO_CXX11_STATIC_ASSERT
#else
# define BOOST_HAS_ALIGNOF
# define BOOST_HAS_CHAR16_T
# define BOOST_HAS_CHAR32_T
# define BOOST_HAS_DECLTYPE
# define BOOST_HAS_EXPLICIT_CONVERSION_OPS
# define BOOST_HAS_REF_QUALIFIER
# define BOOST_HAS_RVALUE_REFS
# define BOOST_HAS_STATIC_ASSERT
#endif
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DEFAULTED_MOVES
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS // UTF-8 still not supported
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
#if __BORLANDC__ >= 0x590
# define BOOST_HAS_TR1_HASH
# define BOOST_HAS_MACRO_USE_FACET
#endif
//
// Post 0x561 we have long long and stdint.h:
#if __BORLANDC__ >= 0x561
# ifndef __NO_LONG_LONG
# define BOOST_HAS_LONG_LONG
# else
# define BOOST_NO_LONG_LONG
# endif
// On non-Win32 platforms let the platform config figure this out:
# ifdef _WIN32
# define BOOST_HAS_STDINT_H
# endif
#endif
// Borland C++Builder 6 defaults to using STLPort. If _USE_OLD_RW_STL is
// defined, then we have 0x560 or greater with the Rogue Wave implementation
// which presumably has the std::DBL_MAX bug.
#if defined( BOOST_BCB_WITH_ROGUE_WAVE )
// <climits> is partly broken, some macros define symbols that are really in
// namespace std, so you end up having to use illegal constructs like
// std::DBL_MAX, as a fix we'll just include float.h and have done with:
#include <float.h>
#endif
//
// __int64:
//
#if (__BORLANDC__ >= 0x530) && !defined(__STRICT_ANSI__)
# define BOOST_HAS_MS_INT64
#endif
//
// check for exception handling support:
//
#if !defined(_CPPUNWIND) && !defined(BOOST_CPPUNWIND) && !defined(__EXCEPTIONS) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
//
// all versions have a <dirent.h>:
//
#ifndef __STRICT_ANSI__
# define BOOST_HAS_DIRENT_H
#endif
//
// all versions support __declspec:
//
#if defined(__STRICT_ANSI__)
// config/platform/win32.hpp will define BOOST_SYMBOL_EXPORT, etc., unless already defined
# define BOOST_SYMBOL_EXPORT
#endif
//
// ABI fixing headers:
//
#if __BORLANDC__ != 0x600 // not implemented for version 6 compiler yet
#ifndef BOOST_ABI_PREFIX
# define BOOST_ABI_PREFIX "boost/config/abi/borland_prefix.hpp"
#endif
#ifndef BOOST_ABI_SUFFIX
# define BOOST_ABI_SUFFIX "boost/config/abi/borland_suffix.hpp"
#endif
#endif
//
// Disable Win32 support in ANSI mode:
//
#if __BORLANDC__ < 0x600
# pragma defineonoption BOOST_DISABLE_WIN32 -A
#elif defined(__STRICT_ANSI__)
# define BOOST_DISABLE_WIN32
#endif
//
// MSVC compatibility mode does some nasty things:
// TODO: look up if this doesn't apply to the whole 12xx range
//
#if defined(_MSC_VER) && (_MSC_VER <= 1200)
# define BOOST_NO_ARGUMENT_DEPENDENT_LOOKUP
# define BOOST_NO_VOID_RETURNS
#endif
// Borland did not implement value-initialization completely, as I reported
// in 2007, Borland Report 51854, "Value-initialization: POD struct should be
// zero-initialized", http://qc.embarcadero.com/wc/qcmain.aspx?d=51854
// See also: http://www.boost.org/libs/utility/value_init.htm#compiler_issues
// (Niels Dekker, LKEB, April 2010)
#define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
#define BOOST_COMPILER "Borland C++ version " BOOST_STRINGIZE(__BORLANDC__)

View File

@@ -1,352 +0,0 @@
// (C) Copyright Douglas Gregor 2010
//
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Clang compiler setup.
#define BOOST_HAS_PRAGMA_ONCE
// Detecting `-fms-extension` compiler flag assuming that _MSC_VER defined when that flag is used.
#if defined (_MSC_VER) && (__clang_major__ > 3 || (__clang_major__ == 3 && __clang_minor__ >= 4))
# define BOOST_HAS_PRAGMA_DETECT_MISMATCH
#endif
// When compiling with clang before __has_extension was defined,
// even if one writes 'defined(__has_extension) && __has_extension(xxx)',
// clang reports a compiler error. So the only workaround found is:
#ifndef __has_extension
#define __has_extension __has_feature
#endif
#ifndef __has_attribute
#define __has_attribute(x) 0
#endif
#ifndef __has_cpp_attribute
#define __has_cpp_attribute(x) 0
#endif
#if !__has_feature(cxx_exceptions) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
#if !__has_feature(cxx_rtti) && !defined(BOOST_NO_RTTI)
# define BOOST_NO_RTTI
#endif
#if !__has_feature(cxx_rtti) && !defined(BOOST_NO_TYPEID)
# define BOOST_NO_TYPEID
#endif
#if !__has_feature(cxx_thread_local)
# define BOOST_NO_CXX11_THREAD_LOCAL
#endif
#ifdef __is_identifier
#if !__is_identifier(__int64) && !defined(__GNUC__)
# define BOOST_HAS_MS_INT64
#endif
#endif
#if __has_include(<stdint.h>)
# define BOOST_HAS_STDINT_H
#endif
#if (defined(linux) || defined(__linux) || defined(__linux__) || defined(__GNU__) || defined(__GLIBC__)) && !defined(_CRAYC)
#if (__clang_major__ >= 4) && defined(__has_include)
#if __has_include(<quadmath.h>)
# define BOOST_HAS_FLOAT128
#endif
#endif
#endif
#define BOOST_HAS_NRVO
// Branch prediction hints
#if !defined (__c2__) && defined(__has_builtin)
#if __has_builtin(__builtin_expect)
#define BOOST_LIKELY(x) __builtin_expect(x, 1)
#define BOOST_UNLIKELY(x) __builtin_expect(x, 0)
#endif
#endif
// Clang supports "long long" in all compilation modes.
#define BOOST_HAS_LONG_LONG
//
// We disable this if the compiler is really nvcc with C++03 as it
// doesn't actually support __int128 as of CUDA_VERSION=7500
// even though it defines __SIZEOF_INT128__.
// See https://svn.boost.org/trac/boost/ticket/10418
// https://svn.boost.org/trac/boost/ticket/11852
// Only re-enable this for nvcc if you're absolutely sure
// of the circumstances under which it's supported.
// Similarly __SIZEOF_INT128__ is defined when targetting msvc
// compatibility even though the required support functions are absent.
//
#if defined(__CUDACC__)
# if defined(BOOST_GCC_CXX11)
# define BOOST_NVCC_CXX11
# else
# define BOOST_NVCC_CXX03
# endif
#endif
#if defined(__SIZEOF_INT128__) && !defined(BOOST_NVCC_CXX03) && !defined(_MSC_VER)
# define BOOST_HAS_INT128
#endif
//
// Dynamic shared object (DSO) and dynamic-link library (DLL) support
//
#if defined(_WIN32) || defined(__WIN32__) || defined(WIN32) || defined(__CYGWIN__)
# define BOOST_HAS_DECLSPEC
# define BOOST_SYMBOL_EXPORT __attribute__((__dllexport__))
# define BOOST_SYMBOL_IMPORT __attribute__((__dllimport__))
#else
# define BOOST_SYMBOL_EXPORT __attribute__((__visibility__("default")))
# define BOOST_SYMBOL_VISIBLE __attribute__((__visibility__("default")))
# define BOOST_SYMBOL_IMPORT
#endif
//
// The BOOST_FALLTHROUGH macro can be used to annotate implicit fall-through
// between switch labels.
//
#if __cplusplus >= 201103L && defined(__has_warning)
# if __has_feature(cxx_attributes) && __has_warning("-Wimplicit-fallthrough")
# define BOOST_FALLTHROUGH [[clang::fallthrough]]
# endif
#endif
#if !__has_feature(cxx_auto_type)
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#endif
//
// Currently clang on Windows using VC++ RTL does not support C++11's char16_t or char32_t
//
#if (defined(_MSC_VER) && (_MSC_VER < 1900)) || !(defined(__GXX_EXPERIMENTAL_CXX0X__) || __cplusplus >= 201103L)
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_CHAR32_T
#endif
#if defined(_MSC_VER) && (_MSC_VER >= 1800) && !defined(__GNUC__)
#define BOOST_HAS_EXPM1
#define BOOST_HAS_LOG1P
#endif
#if !__has_feature(cxx_constexpr)
# define BOOST_NO_CXX11_CONSTEXPR
#endif
#if !__has_feature(cxx_decltype)
# define BOOST_NO_CXX11_DECLTYPE
#endif
#if !__has_feature(cxx_decltype_incomplete_return_types)
# define BOOST_NO_CXX11_DECLTYPE_N3276
#endif
#if !__has_feature(cxx_defaulted_functions)
# define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#endif
#if !__has_feature(cxx_deleted_functions)
# define BOOST_NO_CXX11_DELETED_FUNCTIONS
#endif
#if !__has_feature(cxx_explicit_conversions)
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#endif
#if !__has_feature(cxx_default_function_template_args)
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#endif
#if !__has_feature(cxx_generalized_initializers)
# define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#endif
#if !__has_feature(cxx_lambdas)
# define BOOST_NO_CXX11_LAMBDAS
#endif
#if !__has_feature(cxx_local_type_template_args)
# define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#endif
#if !__has_feature(cxx_noexcept)
# define BOOST_NO_CXX11_NOEXCEPT
#endif
#if !__has_feature(cxx_nullptr)
# define BOOST_NO_CXX11_NULLPTR
#endif
#if !__has_feature(cxx_range_for)
# define BOOST_NO_CXX11_RANGE_BASED_FOR
#endif
#if !__has_feature(cxx_raw_string_literals)
# define BOOST_NO_CXX11_RAW_LITERALS
#endif
#if !__has_feature(cxx_reference_qualified_functions)
# define BOOST_NO_CXX11_REF_QUALIFIERS
#endif
#if !__has_feature(cxx_generalized_initializers)
# define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#endif
#if !__has_feature(cxx_rvalue_references)
# define BOOST_NO_CXX11_RVALUE_REFERENCES
#endif
#if !__has_feature(cxx_strong_enums)
# define BOOST_NO_CXX11_SCOPED_ENUMS
#endif
#if !__has_feature(cxx_static_assert)
# define BOOST_NO_CXX11_STATIC_ASSERT
#endif
#if !__has_feature(cxx_alias_templates)
# define BOOST_NO_CXX11_TEMPLATE_ALIASES
#endif
#if !__has_feature(cxx_unicode_literals)
# define BOOST_NO_CXX11_UNICODE_LITERALS
#endif
#if !__has_feature(cxx_variadic_templates)
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#endif
#if !__has_feature(cxx_user_literals)
# define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#endif
#if !__has_feature(cxx_alignas)
# define BOOST_NO_CXX11_ALIGNAS
#endif
#if !__has_feature(cxx_trailing_return)
# define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#endif
#if !__has_feature(cxx_inline_namespaces)
# define BOOST_NO_CXX11_INLINE_NAMESPACES
#endif
#if !__has_feature(cxx_override_control)
# define BOOST_NO_CXX11_FINAL
#endif
#if !__has_feature(cxx_unrestricted_unions)
# define BOOST_NO_CXX11_UNRESTRICTED_UNION
#endif
#if !(__has_feature(__cxx_binary_literals__) || __has_extension(__cxx_binary_literals__))
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !__has_feature(__cxx_decltype_auto__)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if !__has_feature(__cxx_aggregate_nsdmi__)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !__has_feature(__cxx_init_captures__)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !__has_feature(__cxx_generic_lambdas__)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
// clang < 3.5 has a defect with dependent type, like following.
//
// template <class T>
// constexpr typename enable_if<pred<T> >::type foo(T &)
// { } // error: no return statement in constexpr function
//
// This issue also affects C++11 mode, but C++11 constexpr requires return stmt.
// Therefore we don't care such case.
//
// Note that we can't check Clang version directly as the numbering system changes depending who's
// creating the Clang release (see https://github.com/boostorg/config/pull/39#issuecomment-59927873)
// so instead verify that we have a feature that was introduced at the same time as working C++14
// constexpr (generic lambda's in this case):
//
#if !__has_feature(__cxx_generic_lambdas__) || !__has_feature(__cxx_relaxed_constexpr__)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !__has_feature(__cxx_return_type_deduction__)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !__has_feature(__cxx_variable_templates__)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
// Clang 3.9+ in c++1z
#if !__has_cpp_attribute(fallthrough) || __cplusplus < 201406L
# define BOOST_NO_CXX17_INLINE_VARIABLES
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if __cplusplus < 201103L
#define BOOST_NO_CXX11_SFINAE_EXPR
#endif
#if __cplusplus < 201400
// All versions with __cplusplus above this value seem to support this:
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
//
// __builtin_unreachable:
#if defined(__has_builtin) && __has_builtin(__builtin_unreachable)
#define BOOST_UNREACHABLE_RETURN(x) __builtin_unreachable();
#endif
#if (__clang_major__ == 3) && (__clang_minor__ == 0)
// Apparently a clang bug:
# define BOOST_NO_CXX11_FIXED_LENGTH_VARIADIC_TEMPLATE_EXPANSION_PACKS
#endif
// Clang has supported the 'unused' attribute since the first release.
#define BOOST_ATTRIBUTE_UNUSED __attribute__((__unused__))
// Type aliasing hint.
#if __has_attribute(__may_alias__)
# define BOOST_MAY_ALIAS __attribute__((__may_alias__))
#endif
#ifndef BOOST_COMPILER
# define BOOST_COMPILER "Clang version " __clang_version__
#endif
// Macro used to identify the Clang compiler.
#define BOOST_CLANG 1

View File

@@ -1,240 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright David Abrahams 2002 - 2003.
// (C) Copyright Aleksey Gurtovoy 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// CodeGear C++ compiler setup:
#if !defined( BOOST_WITH_CODEGEAR_WARNINGS )
// these warnings occur frequently in optimized template code
# pragma warn -8004 // var assigned value, but never used
# pragma warn -8008 // condition always true/false
# pragma warn -8066 // dead code can never execute
# pragma warn -8104 // static members with ctors not threadsafe
# pragma warn -8105 // reference member in class without ctors
#endif
//
// versions check:
// last known and checked version is 0x621
#if (__CODEGEARC__ > 0x621)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# else
# pragma message( "boost: Unknown compiler version - please run the configure tests and report the results")
# endif
#endif
// CodeGear C++ Builder 2009
#if (__CODEGEARC__ <= 0x613)
# define BOOST_NO_INTEGRAL_INT64_T
# define BOOST_NO_DEPENDENT_NESTED_DERIVATIONS
# define BOOST_NO_PRIVATE_IN_AGGREGATE
# define BOOST_NO_USING_DECLARATION_OVERLOADS_FROM_TYPENAME_BASE
// we shouldn't really need this - but too many things choke
// without it, this needs more investigation:
# define BOOST_NO_LIMITS_COMPILE_TIME_CONSTANTS
# define BOOST_SP_NO_SP_CONVERTIBLE
#endif
// CodeGear C++ Builder 2010
#if (__CODEGEARC__ <= 0x621)
# define BOOST_NO_TYPENAME_WITH_CTOR // Cannot use typename keyword when making temporaries of a dependant type
# define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
# define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
# define BOOST_NO_NESTED_FRIENDSHIP // TC1 gives nested classes access rights as any other member
# define BOOST_NO_USING_TEMPLATE
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
// Temporary hack, until specific MPL preprocessed headers are generated
# define BOOST_MPL_CFG_NO_PREPROCESSED_HEADERS
// CodeGear has not yet completely implemented value-initialization, for
// example for array types, as I reported in 2010: Embarcadero Report 83751,
// "Value-initialization: arrays should have each element value-initialized",
// http://qc.embarcadero.com/wc/qcmain.aspx?d=83751
// Last checked version: Embarcadero C++ 6.21
// See also: http://www.boost.org/libs/utility/value_init.htm#compiler_issues
// (Niels Dekker, LKEB, April 2010)
# define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
# if defined(NDEBUG) && defined(__cplusplus)
// fix broken <cstring> so that Boost.test works:
# include <cstring>
# undef strcmp
# endif
// fix broken errno declaration:
# include <errno.h>
# ifndef errno
# define errno errno
# endif
#endif
// Reportedly, #pragma once is supported since C++ Builder 2010
#if (__CODEGEARC__ >= 0x620)
# define BOOST_HAS_PRAGMA_ONCE
#endif
//
// C++0x macros:
//
#if (__CODEGEARC__ <= 0x620)
#define BOOST_NO_CXX11_STATIC_ASSERT
#else
#define BOOST_HAS_STATIC_ASSERT
#endif
#define BOOST_HAS_CHAR16_T
#define BOOST_HAS_CHAR32_T
#define BOOST_HAS_LONG_LONG
// #define BOOST_HAS_ALIGNOF
#define BOOST_HAS_DECLTYPE
#define BOOST_HAS_EXPLICIT_CONVERSION_OPS
// #define BOOST_HAS_RVALUE_REFS
#define BOOST_HAS_SCOPED_ENUM
// #define BOOST_HAS_STATIC_ASSERT
#define BOOST_HAS_STD_TYPE_TRAITS
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXTERN_TEMPLATE
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
//
// TR1 macros:
//
#define BOOST_HAS_TR1_HASH
#define BOOST_HAS_TR1_TYPE_TRAITS
#define BOOST_HAS_TR1_UNORDERED_MAP
#define BOOST_HAS_TR1_UNORDERED_SET
#define BOOST_HAS_MACRO_USE_FACET
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
// On non-Win32 platforms let the platform config figure this out:
#ifdef _WIN32
# define BOOST_HAS_STDINT_H
#endif
//
// __int64:
//
#if !defined(__STRICT_ANSI__)
# define BOOST_HAS_MS_INT64
#endif
//
// check for exception handling support:
//
#if !defined(_CPPUNWIND) && !defined(BOOST_CPPUNWIND) && !defined(__EXCEPTIONS) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
//
// all versions have a <dirent.h>:
//
#if !defined(__STRICT_ANSI__)
# define BOOST_HAS_DIRENT_H
#endif
//
// all versions support __declspec:
//
#if defined(__STRICT_ANSI__)
// config/platform/win32.hpp will define BOOST_SYMBOL_EXPORT, etc., unless already defined
# define BOOST_SYMBOL_EXPORT
#endif
//
// ABI fixing headers:
//
#ifndef BOOST_ABI_PREFIX
# define BOOST_ABI_PREFIX "boost/config/abi/borland_prefix.hpp"
#endif
#ifndef BOOST_ABI_SUFFIX
# define BOOST_ABI_SUFFIX "boost/config/abi/borland_suffix.hpp"
#endif
//
// Disable Win32 support in ANSI mode:
//
# pragma defineonoption BOOST_DISABLE_WIN32 -A
//
// MSVC compatibility mode does some nasty things:
// TODO: look up if this doesn't apply to the whole 12xx range
//
#if defined(_MSC_VER) && (_MSC_VER <= 1200)
# define BOOST_NO_ARGUMENT_DEPENDENT_LOOKUP
# define BOOST_NO_VOID_RETURNS
#endif
#define BOOST_COMPILER "CodeGear C++ version " BOOST_STRINGIZE(__CODEGEARC__)

View File

@@ -1,59 +0,0 @@
// (C) Copyright John Maddock 2001.
// (C) Copyright Douglas Gregor 2001.
// (C) Copyright Peter Dimov 2001.
// (C) Copyright Aleksey Gurtovoy 2003.
// (C) Copyright Beman Dawes 2003.
// (C) Copyright Jens Maurer 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Comeau C++ compiler setup:
#include <boost/config/compiler/common_edg.hpp>
#if (__COMO_VERSION__ <= 4245)
# if defined(_MSC_VER) && _MSC_VER <= 1300
# if _MSC_VER > 100
// only set this in non-strict mode:
# define BOOST_NO_ARGUMENT_DEPENDENT_LOOKUP
# endif
# endif
// Void returns don't work when emulating VC 6 (Peter Dimov)
// TODO: look up if this doesn't apply to the whole 12xx range
# if defined(_MSC_VER) && (_MSC_VER < 1300)
# define BOOST_NO_VOID_RETURNS
# endif
#endif // version 4245
//
// enable __int64 support in VC emulation mode
//
# if defined(_MSC_VER) && (_MSC_VER >= 1200)
# define BOOST_HAS_MS_INT64
# endif
#define BOOST_COMPILER "Comeau compiler version " BOOST_STRINGIZE(__COMO_VERSION__)
//
// versions check:
// we don't know Comeau prior to version 4245:
#if __COMO_VERSION__ < 4245
# error "Compiler not configured - please reconfigure"
#endif
//
// last known and checked version is 4245:
#if (__COMO_VERSION__ > 4245)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,161 +0,0 @@
// (C) Copyright John Maddock 2001 - 2002.
// (C) Copyright Jens Maurer 2001.
// (C) Copyright David Abrahams 2002.
// (C) Copyright Aleksey Gurtovoy 2002.
// (C) Copyright Markus Schoepflin 2005.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
//
// Options common to all edg based compilers.
//
// This is included from within the individual compiler mini-configs.
#ifndef __EDG_VERSION__
# error This file requires that __EDG_VERSION__ be defined.
#endif
#if (__EDG_VERSION__ <= 238)
# define BOOST_NO_INTEGRAL_INT64_T
# define BOOST_NO_SFINAE
#endif
#if (__EDG_VERSION__ <= 240)
# define BOOST_NO_VOID_RETURNS
#endif
#if (__EDG_VERSION__ <= 241) && !defined(BOOST_NO_ARGUMENT_DEPENDENT_LOOKUP)
# define BOOST_NO_ARGUMENT_DEPENDENT_LOOKUP
#endif
#if (__EDG_VERSION__ <= 244) && !defined(BOOST_NO_TEMPLATE_TEMPLATES)
# define BOOST_NO_TEMPLATE_TEMPLATES
#endif
#if (__EDG_VERSION__ < 300) && !defined(BOOST_NO_IS_ABSTRACT)
# define BOOST_NO_IS_ABSTRACT
#endif
#if (__EDG_VERSION__ <= 303) && !defined(BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL)
# define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
#endif
// See also kai.hpp which checks a Kai-specific symbol for EH
# if !defined(__KCC) && !defined(__EXCEPTIONS) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
# endif
# if !defined(__NO_LONG_LONG)
# define BOOST_HAS_LONG_LONG
# else
# define BOOST_NO_LONG_LONG
# endif
// Not sure what version was the first to support #pragma once, but
// different EDG-based compilers (e.g. Intel) supported it for ages.
// Add a proper version check if it causes problems.
#define BOOST_HAS_PRAGMA_ONCE
//
// C++0x features
//
// See above for BOOST_NO_LONG_LONG
//
#if (__EDG_VERSION__ < 310)
# define BOOST_NO_CXX11_EXTERN_TEMPLATE
#endif
#if (__EDG_VERSION__ <= 310)
// No support for initializer lists
# define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#endif
#if (__EDG_VERSION__ < 400)
# define BOOST_NO_CXX11_VARIADIC_MACROS
#endif
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CHAR16_T
#define BOOST_NO_CXX11_CHAR32_T
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_STATIC_ASSERT
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
#ifdef c_plusplus
// EDG has "long long" in non-strict mode
// However, some libraries have insufficient "long long" support
// #define BOOST_HAS_LONG_LONG
#endif

View File

@@ -1,19 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Tru64 C++ compiler setup (now HP):
#define BOOST_COMPILER "HP Tru64 C++ " BOOST_STRINGIZE(__DECCXX_VER)
#include <boost/config/compiler/common_edg.hpp>
//
// versions check:
// Nothing to do here?

View File

@@ -1,442 +0,0 @@
// Copyright 2011 John Maddock
// Copyright 2013, 2017-2018 Cray, Inc.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Cray C++ compiler setup.
//
// There are a few parameters that affect the macros defined in this file:
//
// - What version of CCE (Cray Compiling Environment) are we running? This
// comes from the '_RELEASE_MAJOR', '_RELEASE_MINOR', and
// '_RELEASE_PATCHLEVEL' macros.
// - What C++ standards conformance level are we using (e.g. '-h
// std=c++14')? This comes from the '__cplusplus' macro.
// - Are we using GCC extensions ('-h gnu' or '-h nognu')? If we have '-h
// gnu' then CCE emulates GCC, and the macros '__GNUC__',
// '__GNUC_MINOR__', and '__GNUC_PATCHLEVEL__' are defined.
//
// This file is organized as follows:
//
// - Verify that the combination of parameters listed above is supported.
// If we have an unsupported combination, we abort with '#error'.
// - Establish baseline values for all Boost macros.
// - Apply changes to the baseline macros based on compiler version. These
// changes are cummulative so each version section only describes the
// changes since the previous version.
// - Within each version section, we may also apply changes based on
// other parameters (i.e. C++ standards conformance level and GCC
// extensions).
//
// To test changes to this file:
//
// ```
// module load cce/8.6.5 # Pick the version you want to test.
// cd boost/libs/config/test/all
// b2 -j 8 toolset=cray cxxstd=03 cxxstd=11 cxxstd=14 cxxstd-dialect=gnu linkflags=-lrt
// ```
// Note: Using 'cxxstd-dialect=iso' is not supported at this time (the
// tests run, but many tests fail).
//
// Note: 'linkflags=-lrt' is needed in Cray Linux Environment. Otherwise
// you get an 'undefined reference to clock_gettime' error.
//
// Note: If a test '*_fail.cpp' file compiles, but fails to run, then it is
// reported as a defect. However, this is not actually a defect. This is an
// area where the test system is somewhat broken. Tests that are failing
// because of this problem are noted in the comments.
//
// Pay attention to the macro definitions for the macros you wish to
// modify. For example, only macros categorized as compiler macros should
// appear in this file; platform macros should not appear in this file.
// Also, some macros have to be defined to specific values; it is not
// always enough to define or undefine a macro.
//
// Macro definitions are available in the source code at:
//
// `boost/libs/config/doc/html/boost_config/boost_macro_reference.html`
//
// Macro definitions are also available online at:
//
// http://www.boost.org/doc/libs/master/libs/config/doc/html/boost_config/boost_macro_reference.html
//
// Typically, if you enable a feature, and the tests pass, then you have
// nothing to worry about. However, it's sometimes hard to figure out if a
// disabled feature needs to stay disabled. To get a list of disabled
// features, run 'b2' in 'boost/libs/config/checks'. These are the macros
// you should pay attention to (in addition to macros that cause test
// failures).
////
//// Front matter
////
// In a developer build of the Cray compiler (i.e. a compiler built by a
// Cray employee), the release patch level is reported as "x". This gives
// versions that look like e.g. "8.6.x".
//
// To accomplish this, the the Cray compiler preprocessor inserts:
//
// #define _RELEASE_PATCHLEVEL x
//
// If we are using a developer build of the compiler, we want to use the
// configuration macros for the most recent patch level of the release. To
// accomplish this, we'll pretend that _RELEASE_PATCHLEVEL is 99.
//
// However, it's difficult to detect if _RELEASE_PATCHLEVEL is x. We must
// consider that the x will be expanded if x is defined as a macro
// elsewhere. For example, imagine if someone put "-D x=3" on the command
// line, and _RELEASE_PATCHLEVEL is x. Then _RELEASE_PATCHLEVEL would
// expand to 3, and we could not distinguish it from an actual
// _RELEASE_PATCHLEVEL of 3. This problem only affects developer builds; in
// production builds, _RELEASE_PATCHLEVEL is always an integer.
//
// IMPORTANT: In developer builds, if x is defined as a macro, you will get
// an incorrect configuration. The behavior in this case is undefined.
//
// Even if x is not defined, we have to use some trickery to detect if
// _RELEASE_PATCHLEVEL is x. First we define BOOST_CRAY_x to some arbitrary
// magic value, 9867657. Then we use BOOST_CRAY_APPEND to append the
// expanded value of _RELEASE_PATCHLEVEL to the string "BOOST_CRAY_".
//
// - If _RELEASE_PATCHLEVEL is undefined, we get "BOOST_CRAY_".
// - If _RELEASE_PATCHLEVEL is 5, we get "BOOST_CRAY_5".
// - If _RELEASE_PATCHLEVEL is x (and x is not defined) we get
// "BOOST_CRAY_x":
//
// Then we check if BOOST_CRAY_x is equal to the output of
// BOOST_CRAY_APPEND. In other words, the output of BOOST_CRAY_APPEND is
// treated as a macro name, and expanded again. If we can safely assume
// that BOOST_CRAY_ is not a macro defined as our magic number, and
// BOOST_CRAY_5 is not a macro defined as our magic number, then the only
// way the equality test can pass is if _RELEASE_PATCHLEVEL expands to x.
//
// So, that is how we detect if we are using a developer build of the Cray
// compiler.
#define BOOST_CRAY_x 9867657 // Arbitrary number
#define BOOST_CRAY_APPEND(MACRO) BOOST_CRAY_APPEND_INTERNAL(MACRO)
#define BOOST_CRAY_APPEND_INTERNAL(MACRO) BOOST_CRAY_##MACRO
#if BOOST_CRAY_x == BOOST_CRAY_APPEND(_RELEASE_PATCHLEVEL)
// This is a developer build.
//
// - _RELEASE_PATCHLEVEL is defined as x, and x is not defined as a macro.
// Pretend _RELEASE_PATCHLEVEL is 99, so we get the configuration for the
// most recent patch level in this release.
#define BOOST_CRAY_VERSION (_RELEASE_MAJOR * 10000 + _RELEASE_MINOR * 100 + 99)
#else
// This is a production build.
//
// _RELEASE_PATCHLEVEL is not defined as x, or x is defined as a macro.
#define BOOST_CRAY_VERSION (_RELEASE_MAJOR * 10000 + _RELEASE_MINOR * 100 + _RELEASE_PATCHLEVEL)
#endif // BOOST_CRAY_x == BOOST_CRAY_APPEND(_RELEASE_PATCHLEVEL)
#undef BOOST_CRAY_APPEND_INTERNAL
#undef BOOST_CRAY_APPEND
#undef BOOST_CRAY_x
#ifdef __GNUC__
# define BOOST_GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
#endif
#ifndef BOOST_COMPILER
# define BOOST_COMPILER "Cray C++ version " BOOST_STRINGIZE(_RELEASE_MAJOR) "." BOOST_STRINGIZE(_RELEASE_MINOR) "." BOOST_STRINGIZE(_RELEASE_PATCHLEVEL)
#endif
// Since the Cray compiler defines '__GNUC__', we have to emulate some
// additional GCC macros in order to make everything work.
//
// FIXME: Perhaps Cray should fix the compiler to define these additional
// macros for GCC emulation?
#if __cplusplus >= 201103L && defined(__GNUC__) && !defined(__GXX_EXPERIMENTAL_CXX0X__)
# define __GXX_EXPERIMENTAL_CXX0X__ 1
#endif
////
//// Parameter validation
////
// FIXME: Do we really need to support compilers before 8.5? Do they pass
// the Boost.Config tests?
#if BOOST_CRAY_VERSION < 80000
# error "Boost is not configured for Cray compilers prior to version 8, please try the configure script."
#endif
// We only support recent EDG based compilers.
#ifndef __EDG__
# error "Unsupported Cray compiler, please try running the configure script."
#endif
////
//// Baseline values
////
#include <boost/config/compiler/common_edg.hpp>
#define BOOST_HAS_NRVO
#define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CHAR16_T
#define BOOST_NO_CXX11_CHAR32_T
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_STATIC_ASSERT
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_VARIADIC_MACROS
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_TWO_PHASE_NAME_LOOKUP
//#define BOOST_BCB_PARTIAL_SPECIALIZATION_BUG
#define BOOST_MATH_DISABLE_STD_FPCLASSIFY
//#define BOOST_HAS_FPCLASSIFY
#define BOOST_SP_USE_PTHREADS
#define BOOST_AC_USE_PTHREADS
//
// Everything that follows is working around what are thought to be
// compiler shortcomings. Revist all of these regularly.
//
//#define BOOST_USE_ENUM_STATIC_ASSERT
//#define BOOST_BUGGY_INTEGRAL_CONSTANT_EXPRESSIONS //(this may be implied by the previous #define
// These constants should be provided by the compiler.
#ifndef __ATOMIC_RELAXED
#define __ATOMIC_RELAXED 0
#define __ATOMIC_CONSUME 1
#define __ATOMIC_ACQUIRE 2
#define __ATOMIC_RELEASE 3
#define __ATOMIC_ACQ_REL 4
#define __ATOMIC_SEQ_CST 5
#endif
////
//// Version changes
////
//
// 8.5.0
//
#if BOOST_CRAY_VERSION >= 80500
#if __cplusplus >= 201103L
#undef BOOST_HAS_NRVO
#undef BOOST_NO_COMPLETE_VALUE_INITIALIZATION
#undef BOOST_NO_CXX11_AUTO_DECLARATIONS
#undef BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#undef BOOST_NO_CXX11_CHAR16_T
#undef BOOST_NO_CXX11_CHAR32_T
#undef BOOST_NO_CXX11_CONSTEXPR
#undef BOOST_NO_CXX11_DECLTYPE
#undef BOOST_NO_CXX11_DECLTYPE_N3276
#undef BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#undef BOOST_NO_CXX11_DELETED_FUNCTIONS
#undef BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#undef BOOST_NO_CXX11_FINAL
#undef BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#undef BOOST_NO_CXX11_LAMBDAS
#undef BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#undef BOOST_NO_CXX11_NOEXCEPT
#undef BOOST_NO_CXX11_NULLPTR
#undef BOOST_NO_CXX11_RANGE_BASED_FOR
#undef BOOST_NO_CXX11_RAW_LITERALS
#undef BOOST_NO_CXX11_REF_QUALIFIERS
#undef BOOST_NO_CXX11_RVALUE_REFERENCES
#undef BOOST_NO_CXX11_SCOPED_ENUMS
#undef BOOST_NO_CXX11_SFINAE_EXPR
#undef BOOST_NO_CXX11_STATIC_ASSERT
#undef BOOST_NO_CXX11_TEMPLATE_ALIASES
#undef BOOST_NO_CXX11_THREAD_LOCAL
#undef BOOST_NO_CXX11_UNICODE_LITERALS
#undef BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#undef BOOST_NO_CXX11_USER_DEFINED_LITERALS
#undef BOOST_NO_CXX11_VARIADIC_MACROS
#undef BOOST_NO_CXX11_VARIADIC_TEMPLATES
#undef BOOST_NO_CXX11_UNRESTRICTED_UNION
#undef BOOST_NO_SFINAE_EXPR
#undef BOOST_NO_TWO_PHASE_NAME_LOOKUP
#undef BOOST_MATH_DISABLE_STD_FPCLASSIFY
#undef BOOST_SP_USE_PTHREADS
#undef BOOST_AC_USE_PTHREADS
#define BOOST_HAS_VARIADIC_TMPL
#define BOOST_HAS_UNISTD_H
#define BOOST_HAS_TR1_COMPLEX_INVERSE_TRIG
#define BOOST_HAS_TR1_COMPLEX_OVERLOADS
#define BOOST_HAS_STDINT_H
#define BOOST_HAS_STATIC_ASSERT
#define BOOST_HAS_SIGACTION
#define BOOST_HAS_SCHED_YIELD
#define BOOST_HAS_RVALUE_REFS
#define BOOST_HAS_PTHREADS
#define BOOST_HAS_PTHREAD_YIELD
#define BOOST_HAS_PTHREAD_MUTEXATTR_SETTYPE
#define BOOST_HAS_PARTIAL_STD_ALLOCATOR
#define BOOST_HAS_NRVO
#define BOOST_HAS_NL_TYPES_H
#define BOOST_HAS_NANOSLEEP
#define BOOST_NO_CXX11_SMART_PTR
#define BOOST_NO_CXX11_HDR_FUNCTIONAL
#define BOOST_NO_CXX14_CONSTEXPR
#define BOOST_HAS_LONG_LONG
#define BOOST_HAS_FLOAT128
#if __cplusplus < 201402L
#define BOOST_NO_CXX11_DECLTYPE_N3276
#endif // __cplusplus < 201402L
#endif // __cplusplus >= 201103L
#endif // BOOST_CRAY_VERSION >= 80500
//
// 8.6.4
// (versions prior to 8.6.5 do not define _RELEASE_PATCHLEVEL)
//
#if BOOST_CRAY_VERSION >= 80600
#if __cplusplus >= 199711L
#define BOOST_HAS_FLOAT128
#define BOOST_HAS_PTHREAD_YIELD // This is a platform macro, but it improves test results.
#define BOOST_NO_COMPLETE_VALUE_INITIALIZATION // This is correct. Test compiles, but fails to run.
#undef BOOST_NO_CXX11_CHAR16_T
#undef BOOST_NO_CXX11_CHAR32_T
#undef BOOST_NO_CXX11_INLINE_NAMESPACES
#undef BOOST_NO_CXX11_FINAL
#undef BOOST_NO_CXX11_FIXED_LENGTH_VARIADIC_TEMPLATE_EXPANSION_PACKS
#undef BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_SFINAE_EXPR // This is correct, even though '*_fail.cpp' test fails.
#undef BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#undef BOOST_NO_CXX11_VARIADIC_MACROS
#undef BOOST_NO_CXX11_VARIADIC_TEMPLATES
// 'BOOST_NO_DEDUCED_TYPENAME' test is broken. The test files are enabled /
// disabled with an '#ifdef BOOST_DEDUCED_TYPENAME'. However,
// 'boost/libs/config/include/boost/config/detail/suffix.hpp' ensures that
// 'BOOST_DEDUCED_TYPENAME' is always defined (the value it is defined as
// depends on 'BOOST_NO_DEDUCED_TYPENAME'). So, modifying
// 'BOOST_NO_DEDUCED_TYPENAME' has no effect on which tests are run.
//
// The 'no_ded_typename_pass.cpp' test should always compile and run
// successfully, because 'BOOST_DEDUCED_TYPENAME' must always have an
// appropriate value (it's not just something that you turn on or off).
// Therefore, if you wish to test changes to 'BOOST_NO_DEDUCED_TYPENAME',
// you have to modify 'no_ded_typename_pass.cpp' to unconditionally include
// 'boost_no_ded_typename.ipp'.
#undef BOOST_NO_DEDUCED_TYPENAME // This is correct. Test is broken.
#undef BOOST_NO_SFINAE_EXPR
#undef BOOST_NO_TWO_PHASE_NAME_LOOKUP
#endif // __cplusplus >= 199711L
#if __cplusplus >= 201103L
#undef BOOST_NO_CXX11_ALIGNAS
#undef BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_HDR_ATOMIC
#undef BOOST_NO_CXX11_HDR_FUNCTIONAL
#define BOOST_NO_CXX11_HDR_REGEX // This is correct. Test compiles, but fails to run.
#undef BOOST_NO_CXX11_SFINAE_EXPR
#undef BOOST_NO_CXX11_SMART_PTR
#undef BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#endif // __cplusplus >= 201103L
#if __cplusplus >= 201402L
#undef BOOST_NO_CXX14_CONSTEXPR
#define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif // __cplusplus == 201402L
#endif // BOOST_CRAY_VERSION >= 80600
//
// 8.6.5
// (no change from 8.6.4)
//
//
// 8.7.0
//
#if BOOST_CRAY_VERSION >= 80700
#if __cplusplus >= 199711L
#endif // __cplusplus >= 199711L
#if __cplusplus >= 201103L
#undef BOOST_NO_CXX11_HDR_ATOMIC
#undef BOOST_NO_CXX11_HDR_REGEX
#endif // __cplusplus >= 201103L
#if __cplusplus >= 201402L
#endif // __cplusplus == 201402L
#endif // BOOST_CRAY_VERSION >= 80700
//
// Next release
//
#if BOOST_CRAY_VERSION > 80799
#if __cplusplus >= 199711L
#endif // __cplusplus >= 199711L
#if __cplusplus >= 201103L
#endif // __cplusplus >= 201103L
#if __cplusplus >= 201402L
#endif // __cplusplus == 201402L
#endif // BOOST_CRAY_VERSION > 80799
////
//// Remove temporary macros
////
// I've commented out some '#undef' statements to signify that we purposely
// want to keep certain macros.
//#undef __GXX_EXPERIMENTAL_CXX0X__
//#undef BOOST_COMPILER
#undef BOOST_GCC_VERSION
#undef BOOST_CRAY_VERSION

View File

@@ -1,26 +0,0 @@
// (C) Copyright Brian Kuhl 2016.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// Check this is a recent EDG based compiler, otherwise we don't support it here:
#ifndef __EDG_VERSION__
# error "Unknown Diab compiler version - please run the configure tests and report the results"
#endif
#include "boost/config/compiler/common_edg.hpp"
#define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#define BOOST_BUGGY_INTEGRAL_CONSTANT_EXPRESSIONS
#define BOOST_MPL_CFG_NO_HAS_XXX_TEMPLATE
#define BOOST_LOG_NO_MEMBER_TEMPLATE_FRIENDS
#define BOOST_REGEX_NO_EXTERNAL_TEMPLATES
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_HDR_CODECVT
#define BOOST_NO_CXX11_NUMERIC_LIMITS
#define BOOST_COMPILER "Wind River Diab " BOOST_STRINGIZE(__VERSION_NUMBER__)

View File

@@ -1,141 +0,0 @@
// Copyright (C) Christof Meerwald 2003
// Copyright (C) Dan Watkins 2003
//
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// Digital Mars C++ compiler setup:
#define BOOST_COMPILER __DMC_VERSION_STRING__
#define BOOST_HAS_LONG_LONG
#define BOOST_HAS_PRAGMA_ONCE
#if !defined(BOOST_STRICT_CONFIG)
#define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
#define BOOST_NO_OPERATORS_IN_NAMESPACE
#define BOOST_NO_UNREACHABLE_RETURN_DETECTION
#define BOOST_NO_SFINAE
#define BOOST_NO_USING_TEMPLATE
#define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
#endif
//
// has macros:
#define BOOST_HAS_DIRENT_H
#define BOOST_HAS_STDINT_H
#define BOOST_HAS_WINTHREADS
#if (__DMC__ >= 0x847)
#define BOOST_HAS_EXPM1
#define BOOST_HAS_LOG1P
#endif
//
// Is this really the best way to detect whether the std lib is in namespace std?
//
#ifdef __cplusplus
#include <cstddef>
#endif
#if !defined(__STL_IMPORT_VENDOR_CSTD) && !defined(_STLP_IMPORT_VENDOR_CSTD)
# define BOOST_NO_STDC_NAMESPACE
#endif
// check for exception handling support:
#if !defined(_CPPUNWIND) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
//
// C++0x features
//
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CHAR16_T
#define BOOST_NO_CXX11_CHAR32_T
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#define BOOST_NO_CXX11_EXTERN_TEMPLATE
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_STATIC_ASSERT
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
#if (__DMC__ <= 0x840)
#error "Compiler not supported or configured - please reconfigure"
#endif
//
// last known and checked version is ...:
#if (__DMC__ > 0x848)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,367 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright Darin Adler 2001 - 2002.
// (C) Copyright Jens Maurer 2001 - 2002.
// (C) Copyright Beman Dawes 2001 - 2003.
// (C) Copyright Douglas Gregor 2002.
// (C) Copyright David Abrahams 2002 - 2003.
// (C) Copyright Synge Todo 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// GNU C++ compiler setup.
//
// Define BOOST_GCC so we know this is "real" GCC and not some pretender:
//
#define BOOST_GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
#if !defined(__CUDACC__)
#define BOOST_GCC BOOST_GCC_VERSION
#endif
#if defined(__GXX_EXPERIMENTAL_CXX0X__) || (__cplusplus >= 201103L)
# define BOOST_GCC_CXX11
#endif
#if __GNUC__ == 3
# if defined (__PATHSCALE__)
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
# define BOOST_NO_IS_ABSTRACT
# endif
# if __GNUC_MINOR__ < 4
# define BOOST_NO_IS_ABSTRACT
# endif
# define BOOST_NO_CXX11_EXTERN_TEMPLATE
#endif
#if __GNUC__ < 4
//
// All problems to gcc-3.x and earlier here:
//
#define BOOST_NO_TWO_PHASE_NAME_LOOKUP
# ifdef __OPEN64__
# define BOOST_NO_IS_ABSTRACT
# endif
#endif
// GCC prior to 3.4 had #pragma once too but it didn't work well with filesystem links
#if BOOST_GCC_VERSION >= 30400
#define BOOST_HAS_PRAGMA_ONCE
#endif
#if BOOST_GCC_VERSION < 40400
// Previous versions of GCC did not completely implement value-initialization:
// GCC Bug 30111, "Value-initialization of POD base class doesn't initialize
// members", reported by Jonathan Wakely in 2006,
// http://gcc.gnu.org/bugzilla/show_bug.cgi?id=30111 (fixed for GCC 4.4)
// GCC Bug 33916, "Default constructor fails to initialize array members",
// reported by Michael Elizabeth Chastain in 2007,
// http://gcc.gnu.org/bugzilla/show_bug.cgi?id=33916 (fixed for GCC 4.2.4)
// See also: http://www.boost.org/libs/utility/value_init.htm#compiler_issues
#define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
#endif
#if !defined(__EXCEPTIONS) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
//
// Threading support: Turn this on unconditionally here (except for
// those platforms where we can know for sure). It will get turned off again
// later if no threading API is detected.
//
#if !defined(__MINGW32__) && !defined(linux) && !defined(__linux) && !defined(__linux__)
# define BOOST_HAS_THREADS
#endif
//
// gcc has "long long"
// Except on Darwin with standard compliance enabled (-pedantic)
// Apple gcc helpfully defines this macro we can query
//
#if !defined(__DARWIN_NO_LONG_LONG)
# define BOOST_HAS_LONG_LONG
#endif
//
// gcc implements the named return value optimization since version 3.1
//
#define BOOST_HAS_NRVO
// Branch prediction hints
#define BOOST_LIKELY(x) __builtin_expect(x, 1)
#define BOOST_UNLIKELY(x) __builtin_expect(x, 0)
//
// Dynamic shared object (DSO) and dynamic-link library (DLL) support
//
#if __GNUC__ >= 4
# if defined(_WIN32) || defined(__WIN32__) || defined(WIN32) || defined(__CYGWIN__)
// All Win32 development environments, including 64-bit Windows and MinGW, define
// _WIN32 or one of its variant spellings. Note that Cygwin is a POSIX environment,
// so does not define _WIN32 or its variants, but still supports dllexport/dllimport.
# define BOOST_HAS_DECLSPEC
# define BOOST_SYMBOL_EXPORT __attribute__((__dllexport__))
# define BOOST_SYMBOL_IMPORT __attribute__((__dllimport__))
# else
# define BOOST_SYMBOL_EXPORT __attribute__((__visibility__("default")))
# define BOOST_SYMBOL_IMPORT
# endif
# define BOOST_SYMBOL_VISIBLE __attribute__((__visibility__("default")))
#else
// config/platform/win32.hpp will define BOOST_SYMBOL_EXPORT, etc., unless already defined
# define BOOST_SYMBOL_EXPORT
#endif
//
// RTTI and typeinfo detection is possible post gcc-4.3:
//
#if BOOST_GCC_VERSION > 40300
# ifndef __GXX_RTTI
# ifndef BOOST_NO_TYPEID
# define BOOST_NO_TYPEID
# endif
# ifndef BOOST_NO_RTTI
# define BOOST_NO_RTTI
# endif
# endif
#endif
//
// Recent GCC versions have __int128 when in 64-bit mode.
//
// We disable this if the compiler is really nvcc with C++03 as it
// doesn't actually support __int128 as of CUDA_VERSION=7500
// even though it defines __SIZEOF_INT128__.
// See https://svn.boost.org/trac/boost/ticket/8048
// https://svn.boost.org/trac/boost/ticket/11852
// Only re-enable this for nvcc if you're absolutely sure
// of the circumstances under which it's supported:
//
#if defined(__CUDACC__)
# if defined(BOOST_GCC_CXX11)
# define BOOST_NVCC_CXX11
# else
# define BOOST_NVCC_CXX03
# endif
#endif
#if defined(__SIZEOF_INT128__) && !defined(BOOST_NVCC_CXX03)
# define BOOST_HAS_INT128
#endif
//
// Recent GCC versions have a __float128 native type, we need to
// include a std lib header to detect this - not ideal, but we'll
// be including <cstddef> later anyway when we select the std lib.
//
// Nevertheless, as of CUDA 7.5, using __float128 with the host
// compiler in pre-C++11 mode is still not supported.
// See https://svn.boost.org/trac/boost/ticket/11852
//
#ifdef __cplusplus
#include <cstddef>
#else
#include <stddef.h>
#endif
#if defined(_GLIBCXX_USE_FLOAT128) && !defined(__STRICT_ANSI__) && !defined(BOOST_NVCC_CXX03)
# define BOOST_HAS_FLOAT128
#endif
// C++0x features in 4.3.n and later
//
#if (BOOST_GCC_VERSION >= 40300) && defined(BOOST_GCC_CXX11)
// C++0x features are only enabled when -std=c++0x or -std=gnu++0x are
// passed on the command line, which in turn defines
// __GXX_EXPERIMENTAL_CXX0X__.
# define BOOST_HAS_DECLTYPE
# define BOOST_HAS_RVALUE_REFS
# define BOOST_HAS_STATIC_ASSERT
# define BOOST_HAS_VARIADIC_TMPL
#else
# define BOOST_NO_CXX11_DECLTYPE
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
# define BOOST_NO_CXX11_RVALUE_REFERENCES
# define BOOST_NO_CXX11_STATIC_ASSERT
#endif
// C++0x features in 4.4.n and later
//
#if (BOOST_GCC_VERSION < 40400) || !defined(BOOST_GCC_CXX11)
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_CHAR32_T
# define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
# define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
# define BOOST_NO_CXX11_DELETED_FUNCTIONS
# define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
# define BOOST_NO_CXX11_INLINE_NAMESPACES
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#endif
#if BOOST_GCC_VERSION < 40500
# define BOOST_NO_SFINAE_EXPR
#endif
// GCC 4.5 forbids declaration of defaulted functions in private or protected sections
#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 5) || !defined(BOOST_GCC_CXX11)
# define BOOST_NO_CXX11_NON_PUBLIC_DEFAULTED_FUNCTIONS
#endif
// C++0x features in 4.5.0 and later
//
#if (BOOST_GCC_VERSION < 40500) || !defined(BOOST_GCC_CXX11)
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
# define BOOST_NO_CXX11_LAMBDAS
# define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
# define BOOST_NO_CXX11_RAW_LITERALS
# define BOOST_NO_CXX11_UNICODE_LITERALS
#endif
// C++0x features in 4.5.1 and later
//
#if (BOOST_GCC_VERSION < 40501) || !defined(BOOST_GCC_CXX11)
// scoped enums have a serious bug in 4.4.0, so define BOOST_NO_CXX11_SCOPED_ENUMS before 4.5.1
// See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=38064
# define BOOST_NO_CXX11_SCOPED_ENUMS
#endif
// C++0x features in 4.6.n and later
//
#if (BOOST_GCC_VERSION < 40600) || !defined(BOOST_GCC_CXX11)
#define BOOST_NO_CXX11_DEFAULTED_MOVES
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#endif
// C++0x features in 4.7.n and later
//
#if (BOOST_GCC_VERSION < 40700) || !defined(BOOST_GCC_CXX11)
// Note that while constexpr is partly supported in gcc-4.6 it's a
// pre-std version with several bugs:
# define BOOST_NO_CXX11_CONSTEXPR
# define BOOST_NO_CXX11_FINAL
# define BOOST_NO_CXX11_TEMPLATE_ALIASES
# define BOOST_NO_CXX11_USER_DEFINED_LITERALS
# define BOOST_NO_CXX11_FIXED_LENGTH_VARIADIC_TEMPLATE_EXPANSION_PACKS
#endif
// C++0x features in 4.8.n and later
//
#if (BOOST_GCC_VERSION < 40800) || !defined(BOOST_GCC_CXX11)
# define BOOST_NO_CXX11_ALIGNAS
# define BOOST_NO_CXX11_THREAD_LOCAL
# define BOOST_NO_CXX11_SFINAE_EXPR
#endif
// C++0x features in 4.8.1 and later
//
#if (BOOST_GCC_VERSION < 40801) || !defined(BOOST_GCC_CXX11)
# define BOOST_NO_CXX11_DECLTYPE_N3276
# define BOOST_NO_CXX11_REF_QUALIFIERS
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
// C++0x features in 5.1 and later
//
#if (BOOST_GCC_VERSION < 50100) || !defined(BOOST_GCC_CXX11)
# define BOOST_NO_CXX11_UNRESTRICTED_UNION
#endif
// C++14 features in 4.9.0 and later
//
#if (BOOST_GCC_VERSION < 40900) || (__cplusplus < 201300)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
# define BOOST_NO_CXX14_DECLTYPE_AUTO
# if !((BOOST_GCC_VERSION >= 40801) && (BOOST_GCC_VERSION < 40900) && defined(BOOST_GCC_CXX11))
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
# endif
#endif
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if (BOOST_GCC_VERSION < 50200) || !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
#if __GNUC__ >= 7
# define BOOST_FALLTHROUGH __attribute__((fallthrough))
#endif
#if defined(__MINGW32__) && !defined(__MINGW64__)
// Currently (March 2019) thread_local is broken on mingw for all current 32bit compiler releases, see
// https://sourceforge.net/p/mingw-w64/bugs/527/
// Not setting this causes program termination on thread exit.
#define BOOST_NO_CXX11_THREAD_LOCAL
#endif
//
// Unused attribute:
#if __GNUC__ >= 4
# define BOOST_ATTRIBUTE_UNUSED __attribute__((__unused__))
#endif
// Type aliasing hint. Supported since gcc 3.3.
#define BOOST_MAY_ALIAS __attribute__((__may_alias__))
//
// __builtin_unreachable:
#if BOOST_GCC_VERSION >= 40500
#define BOOST_UNREACHABLE_RETURN(x) __builtin_unreachable();
#endif
#ifndef BOOST_COMPILER
# define BOOST_COMPILER "GNU C++ version " __VERSION__
#endif
// ConceptGCC compiler:
// http://www.generic-programming.org/software/ConceptGCC/
#ifdef __GXX_CONCEPTS__
# define BOOST_HAS_CONCEPTS
# define BOOST_COMPILER "ConceptGCC version " __VERSION__
#endif
// versions check:
// we don't know gcc prior to version 3.30:
#if (BOOST_GCC_VERSION< 30300)
# error "Compiler not configured - please reconfigure"
#endif
//
// last known and checked version is 8.1:
#if (BOOST_GCC_VERSION > 80100)
# if defined(BOOST_ASSERT_CONFIG)
# error "Boost.Config is older than your compiler - please check for an updated Boost release."
# else
// we don't emit warnings here anymore since there are no defect macros defined for
// gcc post 3.4, so any failures are gcc regressions...
//# warning "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,112 +0,0 @@
// (C) Copyright John Maddock 2006.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// GCC-XML C++ compiler setup:
# if !defined(__GCCXML_GNUC__) || ((__GCCXML_GNUC__ <= 3) && (__GCCXML_GNUC_MINOR__ <= 3))
# define BOOST_NO_IS_ABSTRACT
# endif
//
// Threading support: Turn this on unconditionally here (except for
// those platforms where we can know for sure). It will get turned off again
// later if no threading API is detected.
//
#if !defined(__MINGW32__) && !defined(_MSC_VER) && !defined(linux) && !defined(__linux) && !defined(__linux__)
# define BOOST_HAS_THREADS
#endif
//
// gcc has "long long"
//
#define BOOST_HAS_LONG_LONG
// C++0x features:
//
# define BOOST_NO_CXX11_CONSTEXPR
# define BOOST_NO_CXX11_NULLPTR
# define BOOST_NO_CXX11_TEMPLATE_ALIASES
# define BOOST_NO_CXX11_DECLTYPE
# define BOOST_NO_CXX11_DECLTYPE_N3276
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
# define BOOST_NO_CXX11_RVALUE_REFERENCES
# define BOOST_NO_CXX11_STATIC_ASSERT
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
# define BOOST_NO_CXX11_VARIADIC_MACROS
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_CHAR32_T
# define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
# define BOOST_NO_CXX11_DELETED_FUNCTIONS
# define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
# define BOOST_NO_CXX11_SCOPED_ENUMS
# define BOOST_NO_SFINAE_EXPR
# define BOOST_NO_CXX11_SFINAE_EXPR
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
# define BOOST_NO_CXX11_LAMBDAS
# define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
# define BOOST_NO_CXX11_RANGE_BASED_FOR
# define BOOST_NO_CXX11_RAW_LITERALS
# define BOOST_NO_CXX11_UNICODE_LITERALS
# define BOOST_NO_CXX11_NOEXCEPT
# define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
# define BOOST_NO_CXX11_USER_DEFINED_LITERALS
# define BOOST_NO_CXX11_ALIGNAS
# define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
# define BOOST_NO_CXX11_INLINE_NAMESPACES
# define BOOST_NO_CXX11_REF_QUALIFIERS
# define BOOST_NO_CXX11_FINAL
# define BOOST_NO_CXX11_THREAD_LOCAL
# define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
#define BOOST_COMPILER "GCC-XML C++ version " __GCCXML__

View File

@@ -1,28 +0,0 @@
// (C) Copyright John Maddock 2001.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Greenhills C++ compiler setup:
#define BOOST_COMPILER "Greenhills C++ version " BOOST_STRINGIZE(__ghs)
#include <boost/config/compiler/common_edg.hpp>
//
// versions check:
// we don't support Greenhills prior to version 0:
#if __ghs < 0
# error "Compiler not supported or configured - please reconfigure"
#endif
//
// last known and checked version is 0:
#if (__ghs > 0)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,148 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright Jens Maurer 2001 - 2003.
// (C) Copyright Aleksey Gurtovoy 2002.
// (C) Copyright David Abrahams 2002 - 2003.
// (C) Copyright Toon Knapen 2003.
// (C) Copyright Boris Gubenko 2006 - 2007.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// HP aCC C++ compiler setup:
#if defined(__EDG__)
#include <boost/config/compiler/common_edg.hpp>
#endif
#if (__HP_aCC <= 33100)
# define BOOST_NO_INTEGRAL_INT64_T
# define BOOST_NO_OPERATORS_IN_NAMESPACE
# if !defined(_NAMESPACE_STD)
# define BOOST_NO_STD_LOCALE
# define BOOST_NO_STRINGSTREAM
# endif
#endif
#if (__HP_aCC <= 33300)
// member templates are sufficiently broken that we disable them for now
# define BOOST_NO_MEMBER_TEMPLATES
# define BOOST_NO_DEPENDENT_NESTED_DERIVATIONS
# define BOOST_NO_USING_DECLARATION_OVERLOADS_FROM_TYPENAME_BASE
#endif
#if (__HP_aCC <= 38000)
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#endif
#if (__HP_aCC > 50000) && (__HP_aCC < 60000)
# define BOOST_NO_UNREACHABLE_RETURN_DETECTION
# define BOOST_NO_TEMPLATE_TEMPLATES
# define BOOST_NO_SWPRINTF
# define BOOST_NO_DEPENDENT_TYPES_IN_TEMPLATE_VALUE_PARAMETERS
# define BOOST_NO_IS_ABSTRACT
# define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
#endif
// optional features rather than defects:
#if (__HP_aCC >= 33900)
# define BOOST_HAS_LONG_LONG
# define BOOST_HAS_PARTIAL_STD_ALLOCATOR
#endif
#if (__HP_aCC >= 50000 ) && (__HP_aCC <= 53800 ) || (__HP_aCC < 31300 )
# define BOOST_NO_MEMBER_TEMPLATE_KEYWORD
#endif
// This macro should not be defined when compiling in strict ansi
// mode, but, currently, we don't have the ability to determine
// what standard mode we are compiling with. Some future version
// of aCC6 compiler will provide predefined macros reflecting the
// compilation options, including the standard mode.
#if (__HP_aCC >= 60000) || ((__HP_aCC > 38000) && defined(__hpxstd98))
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#endif
#define BOOST_COMPILER "HP aCC version " BOOST_STRINGIZE(__HP_aCC)
//
// versions check:
// we don't support HP aCC prior to version 33000:
#if __HP_aCC < 33000
# error "Compiler not supported or configured - please reconfigure"
#endif
//
// Extended checks for supporting aCC on PA-RISC
#if __HP_aCC > 30000 && __HP_aCC < 50000
# if __HP_aCC < 38000
// versions prior to version A.03.80 not supported
# error "Compiler version not supported - version A.03.80 or higher is required"
# elif !defined(__hpxstd98)
// must compile using the option +hpxstd98 with version A.03.80 and above
# error "Compiler option '+hpxstd98' is required for proper support"
# endif //PA-RISC
#endif
//
// C++0x features
//
// See boost\config\suffix.hpp for BOOST_NO_LONG_LONG
//
#if !defined(__EDG__)
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CHAR16_T
#define BOOST_NO_CXX11_CHAR32_T
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#define BOOST_NO_CXX11_EXTERN_TEMPLATE
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_STATIC_ASSERT
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
/*
See https://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1443331 and
https://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1443436
*/
#if (__HP_aCC < 62500) || !defined(HP_CXX0x_SOURCE)
#define BOOST_NO_CXX11_VARIADIC_MACROS
#endif
#endif
//
// last known and checked version for HP-UX/ia64 is 61300
// last known and checked version for PA-RISC is 38000
#if ((__HP_aCC > 61300) || ((__HP_aCC > 38000) && defined(__hpxstd98)))
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,574 +0,0 @@
// (C) Copyright John Maddock 2001-8.
// (C) Copyright Peter Dimov 2001.
// (C) Copyright Jens Maurer 2001.
// (C) Copyright David Abrahams 2002 - 2003.
// (C) Copyright Aleksey Gurtovoy 2002 - 2003.
// (C) Copyright Guillaume Melquiond 2002 - 2003.
// (C) Copyright Beman Dawes 2003.
// (C) Copyright Martin Wille 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Intel compiler setup:
#if defined(__INTEL_COMPILER) && (__INTEL_COMPILER >= 1500) && (defined(_MSC_VER) || defined(__GNUC__))
#ifdef _MSC_VER
#include <boost/config/compiler/visualc.hpp>
#undef BOOST_MSVC
#undef BOOST_MSVC_FULL_VER
#if (__INTEL_COMPILER >= 1500) && (_MSC_VER >= 1900)
//
// These appear to be supported, even though VC++ may not support them:
//
#define BOOST_HAS_EXPM1
#define BOOST_HAS_LOG1P
#undef BOOST_NO_CXX14_BINARY_LITERALS
// This one may be a little risky to enable??
#undef BOOST_NO_SFINAE_EXPR
#endif
#if (__INTEL_COMPILER <= 1600) && !defined(BOOST_NO_CXX14_VARIABLE_TEMPLATES)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
#else // defined(_MSC_VER)
#include <boost/config/compiler/gcc.hpp>
#undef BOOST_GCC_VERSION
#undef BOOST_GCC_CXX11
#undef BOOST_GCC
#undef BOOST_FALLTHROUGH
// Broken in all versions up to 17 (newer versions not tested)
#if (__INTEL_COMPILER <= 1700) && !defined(BOOST_NO_CXX14_CONSTEXPR)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if (__INTEL_COMPILER >= 1800) && (__cplusplus >= 201703)
# define BOOST_FALLTHROUGH [[fallthrough]]
#endif
#endif // defined(_MSC_VER)
#undef BOOST_COMPILER
#if defined(__INTEL_COMPILER)
#if __INTEL_COMPILER == 9999
# define BOOST_INTEL_CXX_VERSION 1200 // Intel bug in 12.1.
#else
# define BOOST_INTEL_CXX_VERSION __INTEL_COMPILER
#endif
#elif defined(__ICL)
# define BOOST_INTEL_CXX_VERSION __ICL
#elif defined(__ICC)
# define BOOST_INTEL_CXX_VERSION __ICC
#elif defined(__ECC)
# define BOOST_INTEL_CXX_VERSION __ECC
#endif
// Flags determined by comparing output of 'icpc -dM -E' with and without '-std=c++0x'
#if (!(defined(_WIN32) || defined(_WIN64)) && defined(__STDC_HOSTED__) && (__STDC_HOSTED__ && (BOOST_INTEL_CXX_VERSION <= 1200))) || defined(__GXX_EXPERIMENTAL_CPP0X__) || defined(__GXX_EXPERIMENTAL_CXX0X__)
# define BOOST_INTEL_STDCXX0X
#endif
#if defined(_MSC_VER) && (_MSC_VER >= 1600)
# define BOOST_INTEL_STDCXX0X
#endif
#ifdef __GNUC__
# define BOOST_INTEL_GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
#endif
#if !defined(BOOST_COMPILER)
# if defined(BOOST_INTEL_STDCXX0X)
# define BOOST_COMPILER "Intel C++ C++0x mode version " BOOST_STRINGIZE(BOOST_INTEL_CXX_VERSION)
# else
# define BOOST_COMPILER "Intel C++ version " BOOST_STRINGIZE(BOOST_INTEL_CXX_VERSION)
# endif
#endif
#define BOOST_INTEL BOOST_INTEL_CXX_VERSION
#if defined(_WIN32) || defined(_WIN64)
# define BOOST_INTEL_WIN BOOST_INTEL
#else
# define BOOST_INTEL_LINUX BOOST_INTEL
#endif
#else // defined(__INTEL_COMPILER) && (__INTEL_COMPILER >= 1500) && (defined(_MSC_VER) || defined(__GNUC__))
#include <boost/config/compiler/common_edg.hpp>
#if defined(__INTEL_COMPILER)
#if __INTEL_COMPILER == 9999
# define BOOST_INTEL_CXX_VERSION 1200 // Intel bug in 12.1.
#else
# define BOOST_INTEL_CXX_VERSION __INTEL_COMPILER
#endif
#elif defined(__ICL)
# define BOOST_INTEL_CXX_VERSION __ICL
#elif defined(__ICC)
# define BOOST_INTEL_CXX_VERSION __ICC
#elif defined(__ECC)
# define BOOST_INTEL_CXX_VERSION __ECC
#endif
// Flags determined by comparing output of 'icpc -dM -E' with and without '-std=c++0x'
#if (!(defined(_WIN32) || defined(_WIN64)) && defined(__STDC_HOSTED__) && (__STDC_HOSTED__ && (BOOST_INTEL_CXX_VERSION <= 1200))) || defined(__GXX_EXPERIMENTAL_CPP0X__) || defined(__GXX_EXPERIMENTAL_CXX0X__)
# define BOOST_INTEL_STDCXX0X
#endif
#if defined(_MSC_VER) && (_MSC_VER >= 1600)
# define BOOST_INTEL_STDCXX0X
#endif
#ifdef __GNUC__
# define BOOST_INTEL_GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
#endif
#if !defined(BOOST_COMPILER)
# if defined(BOOST_INTEL_STDCXX0X)
# define BOOST_COMPILER "Intel C++ C++0x mode version " BOOST_STRINGIZE(BOOST_INTEL_CXX_VERSION)
# else
# define BOOST_COMPILER "Intel C++ version " BOOST_STRINGIZE(BOOST_INTEL_CXX_VERSION)
# endif
#endif
#define BOOST_INTEL BOOST_INTEL_CXX_VERSION
#if defined(_WIN32) || defined(_WIN64)
# define BOOST_INTEL_WIN BOOST_INTEL
#else
# define BOOST_INTEL_LINUX BOOST_INTEL
#endif
#if (BOOST_INTEL_CXX_VERSION <= 600)
# if defined(_MSC_VER) && (_MSC_VER <= 1300) // added check for <= VC 7 (Peter Dimov)
// Boost libraries assume strong standard conformance unless otherwise
// indicated by a config macro. As configured by Intel, the EDG front-end
// requires certain compiler options be set to achieve that strong conformance.
// Particularly /Qoption,c,--arg_dep_lookup (reported by Kirk Klobe & Thomas Witt)
// and /Zc:wchar_t,forScope. See boost-root/tools/build/intel-win32-tools.jam for
// details as they apply to particular versions of the compiler. When the
// compiler does not predefine a macro indicating if an option has been set,
// this config file simply assumes the option has been set.
// Thus BOOST_NO_ARGUMENT_DEPENDENT_LOOKUP will not be defined, even if
// the compiler option is not enabled.
# define BOOST_NO_SWPRINTF
# endif
// Void returns, 64 bit integrals don't work when emulating VC 6 (Peter Dimov)
# if defined(_MSC_VER) && (_MSC_VER <= 1200)
# define BOOST_NO_VOID_RETURNS
# define BOOST_NO_INTEGRAL_INT64_T
# endif
#endif
#if (BOOST_INTEL_CXX_VERSION <= 710) && defined(_WIN32)
# define BOOST_NO_POINTER_TO_MEMBER_TEMPLATE_PARAMETERS
#endif
// See http://aspn.activestate.com/ASPN/Mail/Message/boost/1614864
#if BOOST_INTEL_CXX_VERSION < 600
# define BOOST_NO_INTRINSIC_WCHAR_T
#else
// We should test the macro _WCHAR_T_DEFINED to check if the compiler
// supports wchar_t natively. *BUT* there is a problem here: the standard
// headers define this macro if they typedef wchar_t. Anyway, we're lucky
// because they define it without a value, while Intel C++ defines it
// to 1. So we can check its value to see if the macro was defined natively
// or not.
// Under UNIX, the situation is exactly the same, but the macro _WCHAR_T
// is used instead.
# if ((_WCHAR_T_DEFINED + 0) == 0) && ((_WCHAR_T + 0) == 0)
# define BOOST_NO_INTRINSIC_WCHAR_T
# endif
#endif
#if defined(__GNUC__) && !defined(BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL)
//
// Figure out when Intel is emulating this gcc bug
// (All Intel versions prior to 9.0.26, and versions
// later than that if they are set up to emulate gcc 3.2
// or earlier):
//
# if ((__GNUC__ == 3) && (__GNUC_MINOR__ <= 2)) || (BOOST_INTEL < 900) || (__INTEL_COMPILER_BUILD_DATE < 20050912)
# define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
# endif
#endif
#if (defined(__GNUC__) && (__GNUC__ < 4)) || (defined(_WIN32) && (BOOST_INTEL_CXX_VERSION <= 1200)) || (BOOST_INTEL_CXX_VERSION <= 1200)
// GCC or VC emulation:
#define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#endif
//
// Verify that we have actually got BOOST_NO_INTRINSIC_WCHAR_T
// set correctly, if we don't do this now, we will get errors later
// in type_traits code among other things, getting this correct
// for the Intel compiler is actually remarkably fragile and tricky:
//
#ifdef __cplusplus
#if defined(BOOST_NO_INTRINSIC_WCHAR_T)
#include <cwchar>
template< typename T > struct assert_no_intrinsic_wchar_t;
template<> struct assert_no_intrinsic_wchar_t<wchar_t> { typedef void type; };
// if you see an error here then you need to unset BOOST_NO_INTRINSIC_WCHAR_T
// where it is defined above:
typedef assert_no_intrinsic_wchar_t<unsigned short>::type assert_no_intrinsic_wchar_t_;
#else
template< typename T > struct assert_intrinsic_wchar_t;
template<> struct assert_intrinsic_wchar_t<wchar_t> {};
// if you see an error here then define BOOST_NO_INTRINSIC_WCHAR_T on the command line:
template<> struct assert_intrinsic_wchar_t<unsigned short> {};
#endif
#endif
#if defined(_MSC_VER) && (_MSC_VER+0 >= 1000)
# if _MSC_VER >= 1200
# define BOOST_HAS_MS_INT64
# endif
# define BOOST_NO_SWPRINTF
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#elif defined(_WIN32)
# define BOOST_DISABLE_WIN32
#endif
// I checked version 6.0 build 020312Z, it implements the NRVO.
// Correct this as you find out which version of the compiler
// implemented the NRVO first. (Daniel Frey)
#if (BOOST_INTEL_CXX_VERSION >= 600)
# define BOOST_HAS_NRVO
#endif
// Branch prediction hints
// I'm not sure 8.0 was the first version to support these builtins,
// update the condition if the version is not accurate. (Andrey Semashev)
#if defined(__GNUC__) && BOOST_INTEL_CXX_VERSION >= 800
#define BOOST_LIKELY(x) __builtin_expect(x, 1)
#define BOOST_UNLIKELY(x) __builtin_expect(x, 0)
#endif
// RTTI
// __RTTI is the EDG macro
// __INTEL_RTTI__ is the Intel macro
// __GXX_RTTI is the g++ macro
// _CPPRTTI is the MSVC++ macro
#if !defined(__RTTI) && !defined(__INTEL_RTTI__) && !defined(__GXX_RTTI) && !defined(_CPPRTTI)
#if !defined(BOOST_NO_RTTI)
# define BOOST_NO_RTTI
#endif
// in MS mode, static typeid works even when RTTI is off
#if !defined(_MSC_VER) && !defined(BOOST_NO_TYPEID)
# define BOOST_NO_TYPEID
#endif
#endif
//
// versions check:
// we don't support Intel prior to version 6.0:
#if BOOST_INTEL_CXX_VERSION < 600
# error "Compiler not supported or configured - please reconfigure"
#endif
// Intel on MacOS requires
#if defined(__APPLE__) && defined(__INTEL_COMPILER)
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#endif
// Intel on Altix Itanium
#if defined(__itanium__) && defined(__INTEL_COMPILER)
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#endif
//
// An attempt to value-initialize a pointer-to-member may trigger an
// internal error on Intel <= 11.1 (last checked version), as was
// reported by John Maddock, Intel support issue 589832, May 2010.
// Moreover, according to test results from Huang-Vista-x86_32_intel,
// intel-vc9-win-11.1 may leave a non-POD array uninitialized, in some
// cases when it should be value-initialized.
// (Niels Dekker, LKEB, May 2010)
// Apparently Intel 12.1 (compiler version number 9999 !!) has the same issue (compiler regression).
#if defined(__INTEL_COMPILER)
# if (__INTEL_COMPILER <= 1110) || (__INTEL_COMPILER == 9999) || (defined(_WIN32) && (__INTEL_COMPILER < 1600))
# define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
# endif
#endif
//
// Dynamic shared object (DSO) and dynamic-link library (DLL) support
//
#if defined(__GNUC__) && (__GNUC__ >= 4)
# define BOOST_SYMBOL_EXPORT __attribute__((visibility("default")))
# define BOOST_SYMBOL_IMPORT
# define BOOST_SYMBOL_VISIBLE __attribute__((visibility("default")))
#endif
// Type aliasing hint
#if defined(__GNUC__) && (BOOST_INTEL_CXX_VERSION >= 1300)
# define BOOST_MAY_ALIAS __attribute__((__may_alias__))
#endif
//
// C++0x features
// For each feature we need to check both the Intel compiler version,
// and the version of MSVC or GCC that we are emulating.
// See http://software.intel.com/en-us/articles/c0x-features-supported-by-intel-c-compiler/
// for a list of which features were implemented in which Intel releases.
//
#if defined(BOOST_INTEL_STDCXX0X)
// BOOST_NO_CXX11_CONSTEXPR:
#if (BOOST_INTEL_CXX_VERSION >= 1500) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40600)) && !defined(_MSC_VER)
// Available in earlier Intel versions, but fail our tests:
# undef BOOST_NO_CXX11_CONSTEXPR
#endif
// BOOST_NO_CXX11_NULLPTR:
#if (BOOST_INTEL_CXX_VERSION >= 1210) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40600)) && (!defined(_MSC_VER) || (_MSC_VER >= 1600))
# undef BOOST_NO_CXX11_NULLPTR
#endif
// BOOST_NO_CXX11_TEMPLATE_ALIASES
#if (BOOST_INTEL_CXX_VERSION >= 1210) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40700)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_TEMPLATE_ALIASES
#endif
// BOOST_NO_CXX11_DECLTYPE
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40300)) && (!defined(_MSC_VER) || (_MSC_VER >= 1600))
# undef BOOST_NO_CXX11_DECLTYPE
#endif
// BOOST_NO_CXX11_DECLTYPE_N3276
#if (BOOST_INTEL_CXX_VERSION >= 1500) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40800)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_DECLTYPE_N3276
#endif
// BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40300)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#endif
// BOOST_NO_CXX11_RVALUE_REFERENCES
#if (BOOST_INTEL_CXX_VERSION >= 1300) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40300)) && (!defined(_MSC_VER) || (_MSC_VER >= 1600))
// This is available from earlier Intel versions, but breaks Filesystem and other libraries:
# undef BOOST_NO_CXX11_RVALUE_REFERENCES
#endif
// BOOST_NO_CXX11_STATIC_ASSERT
#if (BOOST_INTEL_CXX_VERSION >= 1110) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40300)) && (!defined(_MSC_VER) || (_MSC_VER >= 1600))
# undef BOOST_NO_CXX11_STATIC_ASSERT
#endif
// BOOST_NO_CXX11_VARIADIC_TEMPLATES
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_VARIADIC_TEMPLATES
#endif
// BOOST_NO_CXX11_VARIADIC_MACROS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40200)) && (!defined(_MSC_VER) || (_MSC_VER >= 1400))
# undef BOOST_NO_CXX11_VARIADIC_MACROS
#endif
// BOOST_NO_CXX11_AUTO_DECLARATIONS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_VER >= 1600))
# undef BOOST_NO_CXX11_AUTO_DECLARATIONS
#endif
// BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_VER >= 1600))
# undef BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#endif
// BOOST_NO_CXX11_CHAR16_T
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_VER >= 9999))
# undef BOOST_NO_CXX11_CHAR16_T
#endif
// BOOST_NO_CXX11_CHAR32_T
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_VER >= 9999))
# undef BOOST_NO_CXX11_CHAR32_T
#endif
// BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#endif
// BOOST_NO_CXX11_DELETED_FUNCTIONS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_DELETED_FUNCTIONS
#endif
// BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_VER >= 1700))
# undef BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#endif
// BOOST_NO_CXX11_SCOPED_ENUMS
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40501)) && (!defined(_MSC_VER) || (_MSC_VER >= 1700))
// This is available but broken in earlier Intel releases.
# undef BOOST_NO_CXX11_SCOPED_ENUMS
#endif
// BOOST_NO_SFINAE_EXPR
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40500)) && (!defined(_MSC_VER) || (_MSC_VER >= 9999))
# undef BOOST_NO_SFINAE_EXPR
#endif
// BOOST_NO_CXX11_SFINAE_EXPR
#if (BOOST_INTEL_CXX_VERSION >= 1500) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40800)) && !defined(_MSC_VER)
# undef BOOST_NO_CXX11_SFINAE_EXPR
#endif
// BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#if (BOOST_INTEL_CXX_VERSION >= 1500) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40500)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
// This is available in earlier Intel releases, but breaks Multiprecision:
# undef BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#endif
// BOOST_NO_CXX11_LAMBDAS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40500)) && (!defined(_MSC_VER) || (_MSC_VER >= 1600))
# undef BOOST_NO_CXX11_LAMBDAS
#endif
// BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40500))
# undef BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#endif
// BOOST_NO_CXX11_RANGE_BASED_FOR
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40600)) && (!defined(_MSC_VER) || (_MSC_VER >= 1700))
# undef BOOST_NO_CXX11_RANGE_BASED_FOR
#endif
// BOOST_NO_CXX11_RAW_LITERALS
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40500)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_RAW_LITERALS
#endif
// BOOST_NO_CXX11_UNICODE_LITERALS
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40500)) && (!defined(_MSC_VER) || (_MSC_VER >= 9999))
# undef BOOST_NO_CXX11_UNICODE_LITERALS
#endif
// BOOST_NO_CXX11_NOEXCEPT
#if (BOOST_INTEL_CXX_VERSION >= 1500) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40600)) && (!defined(_MSC_VER) || (_MSC_VER >= 9999))
// Available in earlier Intel release, but generates errors when used with
// conditional exception specifications, for example in multiprecision:
# undef BOOST_NO_CXX11_NOEXCEPT
#endif
// BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40600)) && (!defined(_MSC_VER) || (_MSC_VER >= 9999))
# undef BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#endif
// BOOST_NO_CXX11_USER_DEFINED_LITERALS
#if (BOOST_INTEL_CXX_VERSION >= 1500) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40700)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 190021730))
# undef BOOST_NO_CXX11_USER_DEFINED_LITERALS
#endif
// BOOST_NO_CXX11_ALIGNAS
#if (BOOST_INTEL_CXX_VERSION >= 1500) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40800)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 190021730))
# undef BOOST_NO_CXX11_ALIGNAS
#endif
// BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#if (BOOST_INTEL_CXX_VERSION >= 1200) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 180020827))
# undef BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#endif
// BOOST_NO_CXX11_INLINE_NAMESPACES
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40400)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 190021730))
# undef BOOST_NO_CXX11_INLINE_NAMESPACES
#endif
// BOOST_NO_CXX11_REF_QUALIFIERS
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40800)) && (!defined(_MSC_VER) || (_MSC_FULL_VER >= 190021730))
# undef BOOST_NO_CXX11_REF_QUALIFIERS
#endif
// BOOST_NO_CXX11_FINAL
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 40700)) && (!defined(_MSC_VER) || (_MSC_VER >= 1700))
# undef BOOST_NO_CXX11_FINAL
#endif
// BOOST_NO_CXX11_UNRESTRICTED_UNION
#if (BOOST_INTEL_CXX_VERSION >= 1400) && (!defined(BOOST_INTEL_GCC_VERSION) || (BOOST_INTEL_GCC_VERSION >= 50100)) && (!defined(_MSC_VER))
# undef BOOST_NO_CXX11_UNRESTRICTED_UNION
#endif
#endif // defined(BOOST_INTEL_STDCXX0X)
//
// Broken in all versions up to 15:
#define BOOST_NO_CXX11_FIXED_LENGTH_VARIADIC_TEMPLATE_EXPANSION_PACKS
#if defined(BOOST_INTEL_STDCXX0X) && (BOOST_INTEL_CXX_VERSION <= 1310)
# define BOOST_NO_CXX11_HDR_FUTURE
# define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#endif
#if defined(BOOST_INTEL_STDCXX0X) && (BOOST_INTEL_CXX_VERSION == 1400)
// A regression in Intel's compiler means that <tuple> seems to be broken in this release as well as <future> :
# define BOOST_NO_CXX11_HDR_FUTURE
# define BOOST_NO_CXX11_HDR_TUPLE
#endif
#if (BOOST_INTEL_CXX_VERSION < 1200)
//
// fenv.h appears not to work with Intel prior to 12.0:
//
# define BOOST_NO_FENV_H
#endif
// Intel 13.10 fails to access defaulted functions of a base class declared in private or protected sections,
// producing the following errors:
// error #453: protected function "..." (declared at ...") is not accessible through a "..." pointer or object
#if (BOOST_INTEL_CXX_VERSION <= 1310)
# define BOOST_NO_CXX11_NON_PUBLIC_DEFAULTED_FUNCTIONS
#endif
#if defined(_MSC_VER) && (_MSC_VER >= 1600)
# define BOOST_HAS_STDINT_H
#endif
#if defined(__CUDACC__)
# if defined(BOOST_GCC_CXX11)
# define BOOST_NVCC_CXX11
# else
# define BOOST_NVCC_CXX03
# endif
#endif
#if defined(__LP64__) && defined(__GNUC__) && (BOOST_INTEL_CXX_VERSION >= 1310) && !defined(BOOST_NVCC_CXX03)
# define BOOST_HAS_INT128
#endif
#endif // defined(__INTEL_COMPILER) && (__INTEL_COMPILER >= 1500) && (defined(_MSC_VER) || defined(__GNUC__))
//
// last known and checked version:
#if (BOOST_INTEL_CXX_VERSION > 1700)
# if defined(BOOST_ASSERT_CONFIG)
# error "Boost.Config is older than your compiler - please check for an updated Boost release."
# elif defined(_MSC_VER)
//
// We don't emit this warning any more, since we have so few
// defect macros set anyway (just the one).
//
//# pragma message("boost: Unknown compiler version - please run the configure tests and report the results")
# endif
#endif

View File

@@ -1,33 +0,0 @@
// (C) Copyright John Maddock 2001.
// (C) Copyright David Abrahams 2002.
// (C) Copyright Aleksey Gurtovoy 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Kai C++ compiler setup:
#include <boost/config/compiler/common_edg.hpp>
# if (__KCC_VERSION <= 4001) || !defined(BOOST_STRICT_CONFIG)
// at least on Sun, the contents of <cwchar> is not in namespace std
# define BOOST_NO_STDC_NAMESPACE
# endif
// see also common_edg.hpp which needs a special check for __KCC
# if !defined(_EXCEPTIONS) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
# endif
//
// last known and checked version is 4001:
#if (__KCC_VERSION > 4001)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,196 +0,0 @@
// (C) Copyright John Maddock 2001.
// (C) Copyright Darin Adler 2001.
// (C) Copyright Peter Dimov 2001.
// (C) Copyright David Abrahams 2001 - 2002.
// (C) Copyright Beman Dawes 2001 - 2003.
// (C) Copyright Stefan Slapeta 2004.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Metrowerks C++ compiler setup:
// locale support is disabled when linking with the dynamic runtime
# ifdef _MSL_NO_LOCALE
# define BOOST_NO_STD_LOCALE
# endif
# if __MWERKS__ <= 0x2301 // 5.3
# define BOOST_NO_FUNCTION_TEMPLATE_ORDERING
# define BOOST_NO_POINTER_TO_MEMBER_CONST
# define BOOST_NO_DEPENDENT_TYPES_IN_TEMPLATE_VALUE_PARAMETERS
# define BOOST_NO_MEMBER_TEMPLATE_KEYWORD
# endif
# if __MWERKS__ <= 0x2401 // 6.2
//# define BOOST_NO_FUNCTION_TEMPLATE_ORDERING
# endif
# if(__MWERKS__ <= 0x2407) // 7.x
# define BOOST_NO_MEMBER_FUNCTION_SPECIALIZATIONS
# define BOOST_NO_UNREACHABLE_RETURN_DETECTION
# endif
# if(__MWERKS__ <= 0x3003) // 8.x
# define BOOST_NO_SFINAE
# endif
// the "|| !defined(BOOST_STRICT_CONFIG)" part should apply to the last
// tested version *only*:
# if(__MWERKS__ <= 0x3207) || !defined(BOOST_STRICT_CONFIG) // 9.6
# define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
# define BOOST_NO_IS_ABSTRACT
# endif
#if !__option(wchar_type)
# define BOOST_NO_INTRINSIC_WCHAR_T
#endif
#if !__option(exceptions) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
#if (__INTEL__ && _WIN32) || (__POWERPC__ && macintosh)
# if __MWERKS__ == 0x3000
# define BOOST_COMPILER_VERSION 8.0
# elif __MWERKS__ == 0x3001
# define BOOST_COMPILER_VERSION 8.1
# elif __MWERKS__ == 0x3002
# define BOOST_COMPILER_VERSION 8.2
# elif __MWERKS__ == 0x3003
# define BOOST_COMPILER_VERSION 8.3
# elif __MWERKS__ == 0x3200
# define BOOST_COMPILER_VERSION 9.0
# elif __MWERKS__ == 0x3201
# define BOOST_COMPILER_VERSION 9.1
# elif __MWERKS__ == 0x3202
# define BOOST_COMPILER_VERSION 9.2
# elif __MWERKS__ == 0x3204
# define BOOST_COMPILER_VERSION 9.3
# elif __MWERKS__ == 0x3205
# define BOOST_COMPILER_VERSION 9.4
# elif __MWERKS__ == 0x3206
# define BOOST_COMPILER_VERSION 9.5
# elif __MWERKS__ == 0x3207
# define BOOST_COMPILER_VERSION 9.6
# else
# define BOOST_COMPILER_VERSION __MWERKS__
# endif
#else
# define BOOST_COMPILER_VERSION __MWERKS__
#endif
//
// C++0x features
//
// See boost\config\suffix.hpp for BOOST_NO_LONG_LONG
//
#if __MWERKS__ > 0x3206 && __option(rvalue_refs)
# define BOOST_HAS_RVALUE_REFS
#else
# define BOOST_NO_CXX11_RVALUE_REFERENCES
#endif
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CHAR16_T
#define BOOST_NO_CXX11_CHAR32_T
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#define BOOST_NO_CXX11_EXTERN_TEMPLATE
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_STATIC_ASSERT
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_VARIADIC_MACROS
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
#define BOOST_COMPILER "Metrowerks CodeWarrior C++ version " BOOST_STRINGIZE(BOOST_COMPILER_VERSION)
//
// versions check:
// we don't support Metrowerks prior to version 5.3:
#if __MWERKS__ < 0x2301
# error "Compiler not supported or configured - please reconfigure"
#endif
//
// last known and checked version:
#if (__MWERKS__ > 0x3205)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,138 +0,0 @@
// (C) Copyright John Maddock 2001 - 2002.
// (C) Copyright Aleksey Gurtovoy 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// MPW C++ compilers setup:
# if defined(__SC__)
# define BOOST_COMPILER "MPW SCpp version " BOOST_STRINGIZE(__SC__)
# elif defined(__MRC__)
# define BOOST_COMPILER "MPW MrCpp version " BOOST_STRINGIZE(__MRC__)
# else
# error "Using MPW compiler configuration by mistake. Please update."
# endif
//
// MPW 8.90:
//
#if (MPW_CPLUS <= 0x890) || !defined(BOOST_STRICT_CONFIG)
# define BOOST_NO_CV_SPECIALIZATIONS
# define BOOST_NO_DEPENDENT_NESTED_DERIVATIONS
# define BOOST_NO_DEPENDENT_TYPES_IN_TEMPLATE_VALUE_PARAMETERS
# define BOOST_NO_INCLASS_MEMBER_INITIALIZATION
# define BOOST_NO_INTRINSIC_WCHAR_T
# define BOOST_NO_TEMPLATE_PARTIAL_SPECIALIZATION
# define BOOST_NO_USING_TEMPLATE
# define BOOST_NO_CWCHAR
# define BOOST_NO_LIMITS_COMPILE_TIME_CONSTANTS
# define BOOST_NO_STD_ALLOCATOR /* actually a bug with const reference overloading */
#endif
//
// C++0x features
//
// See boost\config\suffix.hpp for BOOST_NO_LONG_LONG
//
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CHAR16_T
#define BOOST_NO_CXX11_CHAR32_T
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#define BOOST_NO_CXX11_EXTERN_TEMPLATE
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_STATIC_ASSERT
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_VARIADIC_MACROS
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
//
// versions check:
// we don't support MPW prior to version 8.9:
#if MPW_CPLUS < 0x890
# error "Compiler not supported or configured - please reconfigure"
#endif
//
// last known and checked version is 0x890:
#if (MPW_CPLUS > 0x890)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif

View File

@@ -1,58 +0,0 @@
// (C) Copyright Eric Jourdanneau, Joel Falcou 2010
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// NVIDIA CUDA C++ compiler setup
#ifndef BOOST_COMPILER
# define BOOST_COMPILER "NVIDIA CUDA C++ Compiler"
#endif
#if defined(__CUDACC_VER_MAJOR__) && defined(__CUDACC_VER_MINOR__) && defined(__CUDACC_VER_BUILD__)
# define BOOST_CUDA_VERSION (__CUDACC_VER_MAJOR__ * 1000000 + __CUDACC_VER_MINOR__ * 10000 + __CUDACC_VER_BUILD__)
#else
// We don't really know what the CUDA version is, but it's definitely before 7.5:
# define BOOST_CUDA_VERSION 7000000
#endif
// NVIDIA Specific support
// BOOST_GPU_ENABLED : Flag a function or a method as being enabled on the host and device
#define BOOST_GPU_ENABLED __host__ __device__
// A bug in version 7.0 of CUDA prevents use of variadic templates in some occasions
// https://svn.boost.org/trac/boost/ticket/11897
// This is fixed in 7.5. As the following version macro was introduced in 7.5 an existance
// check is enough to detect versions < 7.5
#if BOOST_CUDA_VERSION < 7050000
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#endif
// The same bug is back again in 8.0:
#if (BOOST_CUDA_VERSION > 8000000) && (BOOST_CUDA_VERSION < 8010000)
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#endif
// CUDA (8.0) has no constexpr support in msvc mode:
#if defined(_MSC_VER) && (BOOST_CUDA_VERSION < 9000000)
# define BOOST_NO_CXX11_CONSTEXPR
#endif
#ifdef __CUDACC__
//
// When compiing .cu files, there's a bunch of stuff that doesn't work with msvc:
//
#if defined(_MSC_VER)
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
# define BOOST_NO_CXX11_UNICODE_LITERALS
#endif
//
// And this one effects the NVCC front end,
// See https://svn.boost.org/trac/boost/ticket/13049
//
#if (BOOST_CUDA_VERSION >= 8000000) && (BOOST_CUDA_VERSION < 8010000)
# define BOOST_NO_CXX11_NOEXCEPT
#endif
#endif

View File

@@ -1,136 +0,0 @@
// (C) Copyright Bryce Lelbach 2011
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// PathScale EKOPath C++ Compiler
#ifndef BOOST_COMPILER
# define BOOST_COMPILER "PathScale EKOPath C++ Compiler version " __PATHSCALE__
#endif
#if __PATHCC__ >= 6
// PathCC is based on clang, and supports the __has_*() builtins used
// to detect features in clang.hpp. Since the clang toolset is much
// better maintained, it is more convenient to reuse its definitions.
# include "boost/config/compiler/clang.hpp"
#elif __PATHCC__ >= 4
# define BOOST_MSVC6_MEMBER_TEMPLATES
# define BOOST_HAS_UNISTD_H
# define BOOST_HAS_STDINT_H
# define BOOST_HAS_SIGACTION
# define BOOST_HAS_SCHED_YIELD
# define BOOST_HAS_THREADS
# define BOOST_HAS_PTHREADS
# define BOOST_HAS_PTHREAD_YIELD
# define BOOST_HAS_PTHREAD_MUTEXATTR_SETTYPE
# define BOOST_HAS_PARTIAL_STD_ALLOCATOR
# define BOOST_HAS_NRVO
# define BOOST_HAS_NL_TYPES_H
# define BOOST_HAS_NANOSLEEP
# define BOOST_HAS_LONG_LONG
# define BOOST_HAS_LOG1P
# define BOOST_HAS_GETTIMEOFDAY
# define BOOST_HAS_EXPM1
# define BOOST_HAS_DIRENT_H
# define BOOST_HAS_CLOCK_GETTIME
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
# define BOOST_NO_CXX11_UNICODE_LITERALS
# define BOOST_NO_CXX11_TEMPLATE_ALIASES
# define BOOST_NO_CXX11_STATIC_ASSERT
# define BOOST_NO_SFINAE_EXPR
# define BOOST_NO_CXX11_SFINAE_EXPR
# define BOOST_NO_CXX11_SCOPED_ENUMS
# define BOOST_NO_CXX11_RVALUE_REFERENCES
# define BOOST_NO_CXX11_RANGE_BASED_FOR
# define BOOST_NO_CXX11_RAW_LITERALS
# define BOOST_NO_CXX11_NULLPTR
# define BOOST_NO_CXX11_NUMERIC_LIMITS
# define BOOST_NO_CXX11_NOEXCEPT
# define BOOST_NO_CXX11_LAMBDAS
# define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
# define BOOST_NO_MS_INT64_NUMERIC_LIMITS
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
# define BOOST_NO_CXX11_DELETED_FUNCTIONS
# define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
# define BOOST_NO_CXX11_DECLTYPE
# define BOOST_NO_CXX11_DECLTYPE_N3276
# define BOOST_NO_CXX11_CONSTEXPR
# define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
# define BOOST_NO_CXX11_CHAR32_T
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
# define BOOST_NO_CXX11_HDR_UNORDERED_SET
# define BOOST_NO_CXX11_HDR_UNORDERED_MAP
# define BOOST_NO_CXX11_HDR_TYPEINDEX
# define BOOST_NO_CXX11_HDR_TUPLE
# define BOOST_NO_CXX11_HDR_THREAD
# define BOOST_NO_CXX11_HDR_SYSTEM_ERROR
# define BOOST_NO_CXX11_HDR_REGEX
# define BOOST_NO_CXX11_HDR_RATIO
# define BOOST_NO_CXX11_HDR_RANDOM
# define BOOST_NO_CXX11_HDR_MUTEX
# define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
# define BOOST_NO_CXX11_HDR_FUTURE
# define BOOST_NO_CXX11_HDR_FORWARD_LIST
# define BOOST_NO_CXX11_HDR_CONDITION_VARIABLE
# define BOOST_NO_CXX11_HDR_CODECVT
# define BOOST_NO_CXX11_HDR_CHRONO
# define BOOST_NO_CXX11_USER_DEFINED_LITERALS
# define BOOST_NO_CXX11_ALIGNAS
# define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
# define BOOST_NO_CXX11_INLINE_NAMESPACES
# define BOOST_NO_CXX11_REF_QUALIFIERS
# define BOOST_NO_CXX11_FINAL
# define BOOST_NO_CXX11_THREAD_LOCAL
# define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
#endif

View File

@@ -1,23 +0,0 @@
// (C) Copyright Noel Belcourt 2007.
// Copyright 2017, NVIDIA CORPORATION.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// PGI C++ compiler setup:
#define BOOST_COMPILER_VERSION __PGIC__##__PGIC_MINOR__
#define BOOST_COMPILER "PGI compiler version " BOOST_STRINGIZE(BOOST_COMPILER_VERSION)
// PGI is mostly GNU compatible. So start with that.
#include <boost/config/compiler/gcc.hpp>
// Now adjust for things that are different.
// __float128 is a typedef, not a distinct type.
#undef BOOST_HAS_FLOAT128
// __int128 is not supported.
#undef BOOST_HAS_INT128

View File

@@ -1,29 +0,0 @@
// (C) Copyright John Maddock 2001 - 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// SGI C++ compiler setup:
#define BOOST_COMPILER "SGI Irix compiler version " BOOST_STRINGIZE(_COMPILER_VERSION)
#include <boost/config/compiler/common_edg.hpp>
//
// Threading support:
// Turn this on unconditionally here, it will get turned off again later
// if no threading API is detected.
//
#define BOOST_HAS_THREADS
#define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#undef BOOST_NO_SWPRINTF
#undef BOOST_DEDUCED_TYPENAME
//
// version check:
// probably nothing to do here?

View File

@@ -1,214 +0,0 @@
// (C) Copyright John Maddock 2001.
// (C) Copyright Jens Maurer 2001 - 2003.
// (C) Copyright Peter Dimov 2002.
// (C) Copyright Aleksey Gurtovoy 2002 - 2003.
// (C) Copyright David Abrahams 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Sun C++ compiler setup:
# if __SUNPRO_CC <= 0x500
# define BOOST_NO_MEMBER_TEMPLATES
# define BOOST_NO_FUNCTION_TEMPLATE_ORDERING
# endif
# if (__SUNPRO_CC <= 0x520)
//
// Sunpro 5.2 and earler:
//
// although sunpro 5.2 supports the syntax for
// inline initialization it often gets the value
// wrong, especially where the value is computed
// from other constants (J Maddock 6th May 2001)
# define BOOST_NO_INCLASS_MEMBER_INITIALIZATION
// Although sunpro 5.2 supports the syntax for
// partial specialization, it often seems to
// bind to the wrong specialization. Better
// to disable it until suppport becomes more stable
// (J Maddock 6th May 2001).
# define BOOST_NO_TEMPLATE_PARTIAL_SPECIALIZATION
# endif
# if (__SUNPRO_CC <= 0x530)
// Requesting debug info (-g) with Boost.Python results
// in an internal compiler error for "static const"
// initialized in-class.
// >> Assertion: (../links/dbg_cstabs.cc, line 611)
// while processing ../test.cpp at line 0.
// (Jens Maurer according to Gottfried Ganssauge 04 Mar 2002)
# define BOOST_NO_INCLASS_MEMBER_INITIALIZATION
// SunPro 5.3 has better support for partial specialization,
// but breaks when compiling std::less<shared_ptr<T> >
// (Jens Maurer 4 Nov 2001).
// std::less specialization fixed as reported by George
// Heintzelman; partial specialization re-enabled
// (Peter Dimov 17 Jan 2002)
//# define BOOST_NO_TEMPLATE_PARTIAL_SPECIALIZATION
// integral constant expressions with 64 bit numbers fail
# define BOOST_NO_INTEGRAL_INT64_T
# endif
# if (__SUNPRO_CC < 0x570)
# define BOOST_NO_TEMPLATE_TEMPLATES
// see http://lists.boost.org/MailArchives/boost/msg47184.php
// and http://lists.boost.org/MailArchives/boost/msg47220.php
# define BOOST_NO_INCLASS_MEMBER_INITIALIZATION
# define BOOST_NO_SFINAE
# define BOOST_NO_ARRAY_TYPE_SPECIALIZATIONS
# endif
# if (__SUNPRO_CC <= 0x580)
# define BOOST_NO_IS_ABSTRACT
# endif
# if (__SUNPRO_CC <= 0x5100)
// Sun 5.10 may not correctly value-initialize objects of
// some user defined types, as was reported in April 2010
// (CR 6947016), and confirmed by Steve Clamage.
// (Niels Dekker, LKEB, May 2010).
# define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
# endif
//
// Dynamic shared object (DSO) and dynamic-link library (DLL) support
//
#if __SUNPRO_CC > 0x500
# define BOOST_SYMBOL_EXPORT __global
# define BOOST_SYMBOL_IMPORT __global
# define BOOST_SYMBOL_VISIBLE __global
#endif
#if (__SUNPRO_CC < 0x5130)
// C++03 features in 12.4:
#define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_ADL_BARRIER
#define BOOST_NO_CXX11_VARIADIC_MACROS
#endif
#if (__SUNPRO_CC < 0x5130) || (__cplusplus < 201100)
// C++11 only featuires in 12.4:
#define BOOST_NO_CXX11_AUTO_DECLARATIONS
#define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#define BOOST_NO_CXX11_CHAR16_T
#define BOOST_NO_CXX11_CHAR32_T
#define BOOST_NO_CXX11_CONSTEXPR
#define BOOST_NO_CXX11_DECLTYPE
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#define BOOST_NO_CXX11_EXTERN_TEMPLATE
#define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RVALUE_REFERENCES
#define BOOST_NO_CXX11_SCOPED_ENUMS
#define BOOST_NO_CXX11_STATIC_ASSERT
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
#endif
#if (__SUNPRO_CC < 0x5140) || (__cplusplus < 201103)
#define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_FIXED_LENGTH_VARIADIC_TEMPLATE_EXPANSION_PACKS
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_THREAD_LOCAL
#endif
#define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
//
// C++0x features
//
# define BOOST_HAS_LONG_LONG
#define BOOST_NO_CXX11_SFINAE_EXPR
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304) || (__cplusplus < 201402L)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
// Turn on threading support for Solaris 12.
// Ticket #11972
#if (__SUNPRO_CC >= 0x5140) && defined(__SunOS_5_12) && !defined(BOOST_HAS_THREADS)
# define BOOST_HAS_THREADS
#endif
//
// Version
//
#define BOOST_COMPILER "Sun compiler version " BOOST_STRINGIZE(__SUNPRO_CC)
//
// versions check:
// we don't support sunpro prior to version 4:
#if __SUNPRO_CC < 0x400
#error "Compiler not supported or configured - please reconfigure"
#endif
//
// last known and checked version:
#if (__SUNPRO_CC > 0x5150)
# if defined(BOOST_ASSERT_CONFIG)
# error "Boost.Config is older than your compiler - please check for an updated Boost release."
# endif
#endif

View File

@@ -1,184 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright Toon Knapen 2001 - 2003.
// (C) Copyright Lie-Quan Lee 2001.
// (C) Copyright Markus Schoepflin 2002 - 2003.
// (C) Copyright Beman Dawes 2002 - 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// Visual Age (IBM) C++ compiler setup:
#if __IBMCPP__ <= 501
# define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
# define BOOST_NO_MEMBER_FUNCTION_SPECIALIZATIONS
#endif
#if (__IBMCPP__ <= 502)
// Actually the compiler supports inclass member initialization but it
// requires a definition for the class member and it doesn't recognize
// it as an integral constant expression when used as a template argument.
# define BOOST_NO_INCLASS_MEMBER_INITIALIZATION
# define BOOST_NO_INTEGRAL_INT64_T
# define BOOST_NO_MEMBER_TEMPLATE_KEYWORD
#endif
#if (__IBMCPP__ <= 600) || !defined(BOOST_STRICT_CONFIG)
# define BOOST_NO_POINTER_TO_MEMBER_TEMPLATE_PARAMETERS
#endif
#if (__IBMCPP__ <= 1110)
// XL C++ V11.1 and earlier versions may not always value-initialize
// a temporary object T(), when T is a non-POD aggregate class type.
// Michael Wong (IBM Canada Ltd) has confirmed this issue and gave it
// high priority. -- Niels Dekker (LKEB), May 2010.
# define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
#endif
//
// On AIX thread support seems to be indicated by _THREAD_SAFE:
//
#ifdef _THREAD_SAFE
# define BOOST_HAS_THREADS
#endif
#define BOOST_COMPILER "IBM Visual Age version " BOOST_STRINGIZE(__IBMCPP__)
//
// versions check:
// we don't support Visual age prior to version 5:
#if __IBMCPP__ < 500
#error "Compiler not supported or configured - please reconfigure"
#endif
//
// last known and checked version is 1210:
#if (__IBMCPP__ > 1210)
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown compiler version - please run the configure tests and report the results"
# endif
#endif
// Some versions of the compiler have issues with default arguments on partial specializations
#if __IBMCPP__ <= 1010
#define BOOST_NO_PARTIAL_SPECIALIZATION_IMPLICIT_DEFAULT_ARGS
#endif
// Type aliasing hint. Supported since XL C++ 13.1
#if (__IBMCPP__ >= 1310)
# define BOOST_MAY_ALIAS __attribute__((__may_alias__))
#endif
//
// C++0x features
//
// See boost\config\suffix.hpp for BOOST_NO_LONG_LONG
//
#if ! __IBMCPP_AUTO_TYPEDEDUCTION
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#endif
#if ! __IBMCPP_UTF_LITERAL__
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_CHAR32_T
#endif
#if ! __IBMCPP_CONSTEXPR
# define BOOST_NO_CXX11_CONSTEXPR
#endif
#if ! __IBMCPP_DECLTYPE
# define BOOST_NO_CXX11_DECLTYPE
#else
# define BOOST_HAS_DECLTYPE
#endif
#define BOOST_NO_CXX11_DECLTYPE_N3276
#define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#define BOOST_NO_CXX11_DELETED_FUNCTIONS
#if ! __IBMCPP_EXPLICIT_CONVERSION_OPERATORS
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#endif
#if ! __IBMCPP_EXTERN_TEMPLATE
# define BOOST_NO_CXX11_EXTERN_TEMPLATE
#endif
#if ! __IBMCPP_VARIADIC_TEMPLATES
// not enabled separately at this time
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#endif
#define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#if ! __IBMCPP_RVALUE_REFERENCES
# define BOOST_NO_CXX11_RVALUE_REFERENCES
#endif
#if ! __IBMCPP_SCOPED_ENUM
# define BOOST_NO_CXX11_SCOPED_ENUMS
#endif
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#if ! __IBMCPP_STATIC_ASSERT
# define BOOST_NO_CXX11_STATIC_ASSERT
#endif
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_UNICODE_LITERALS
#if ! __IBMCPP_VARIADIC_TEMPLATES
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#endif
#if ! __C99_MACRO_WITH_VA_ARGS
# define BOOST_NO_CXX11_VARIADIC_MACROS
#endif
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#define BOOST_NO_CXX11_INLINE_NAMESPACES
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
// C++ 14:
#if !defined(__cpp_aggregate_nsdmi) || (__cpp_aggregate_nsdmi < 201304)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !defined(__cpp_binary_literals) || (__cpp_binary_literals < 201304)
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !defined(__cpp_constexpr) || (__cpp_constexpr < 201304)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !defined(__cpp_decltype_auto) || (__cpp_decltype_auto < 201304)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if (__cplusplus < 201304) // There's no SD6 check for this....
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
#if !defined(__cpp_generic_lambdas) || (__cpp_generic_lambdas < 201304)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
#if !defined(__cpp_init_captures) || (__cpp_init_captures < 201304)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !defined(__cpp_return_type_deduction) || (__cpp_return_type_deduction < 201304)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !defined(__cpp_variable_templates) || (__cpp_variable_templates < 201304)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
// C++17
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_inline_variables) || (__cpp_inline_variables < 201606)
# define BOOST_NO_CXX17_INLINE_VARIABLES
#endif
#if !defined(__cpp_fold_expressions) || (__cpp_fold_expressions < 201603)
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif

View File

@@ -1,366 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright Darin Adler 2001 - 2002.
// (C) Copyright Peter Dimov 2001.
// (C) Copyright Aleksey Gurtovoy 2002.
// (C) Copyright David Abrahams 2002 - 2003.
// (C) Copyright Beman Dawes 2002 - 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
//
// Microsoft Visual C++ compiler setup:
//
// We need to be careful with the checks in this file, as contrary
// to popular belief there are versions with _MSC_VER with the final
// digit non-zero (mainly the MIPS cross compiler).
//
// So we either test _MSC_VER >= XXXX or else _MSC_VER < XXXX.
// No other comparisons (==, >, or <=) are safe.
//
#define BOOST_MSVC _MSC_VER
//
// Helper macro BOOST_MSVC_FULL_VER for use in Boost code:
//
#if _MSC_FULL_VER > 100000000
# define BOOST_MSVC_FULL_VER _MSC_FULL_VER
#else
# define BOOST_MSVC_FULL_VER (_MSC_FULL_VER * 10)
#endif
// Attempt to suppress VC6 warnings about the length of decorated names (obsolete):
#pragma warning( disable : 4503 ) // warning: decorated name length exceeded
#define BOOST_HAS_PRAGMA_ONCE
//
// versions check:
// we don't support Visual C++ prior to version 7.1:
#if _MSC_VER < 1310
# error "Compiler not supported or configured - please reconfigure"
#endif
// VS2005 (VC8) docs: __assume has been in Visual C++ for multiple releases
#define BOOST_UNREACHABLE_RETURN(x) __assume(0);
#if _MSC_FULL_VER < 180020827
# define BOOST_NO_FENV_H
#endif
#if _MSC_VER < 1400
// although a conforming signature for swprint exists in VC7.1
// it appears not to actually work:
# define BOOST_NO_SWPRINTF
// Our extern template tests also fail for this compiler:
# define BOOST_NO_CXX11_EXTERN_TEMPLATE
// Variadic macros do not exist for VC7.1 and lower
# define BOOST_NO_CXX11_VARIADIC_MACROS
# define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#endif
#if _MSC_VER < 1500 // 140X == VC++ 8.0
# define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
#endif
#if _MSC_VER < 1600 // 150X == VC++ 9.0
// A bug in VC9:
# define BOOST_NO_ADL_BARRIER
#endif
#ifndef _NATIVE_WCHAR_T_DEFINED
# define BOOST_NO_INTRINSIC_WCHAR_T
#endif
//
// check for exception handling support:
#if !defined(_CPPUNWIND) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
//
// __int64 support:
//
#define BOOST_HAS_MS_INT64
#if defined(_MSC_EXTENSIONS) || (_MSC_VER >= 1400)
# define BOOST_HAS_LONG_LONG
#else
# define BOOST_NO_LONG_LONG
#endif
#if (_MSC_VER >= 1400) && !defined(_DEBUG)
# define BOOST_HAS_NRVO
#endif
#if _MSC_VER >= 1600 // 160X == VC++ 10.0
# define BOOST_HAS_PRAGMA_DETECT_MISMATCH
#endif
//
// disable Win32 API's if compiler extensions are
// turned off:
//
#if !defined(_MSC_EXTENSIONS) && !defined(BOOST_DISABLE_WIN32)
# define BOOST_DISABLE_WIN32
#endif
#if !defined(_CPPRTTI) && !defined(BOOST_NO_RTTI)
# define BOOST_NO_RTTI
#endif
//
// TR1 features:
//
#if (_MSC_VER >= 1700) && defined(_HAS_CXX17) && (_HAS_CXX17 > 0)
// # define BOOST_HAS_TR1_HASH // don't know if this is true yet.
// # define BOOST_HAS_TR1_TYPE_TRAITS // don't know if this is true yet.
# define BOOST_HAS_TR1_UNORDERED_MAP
# define BOOST_HAS_TR1_UNORDERED_SET
#endif
//
// C++0x features
//
// See above for BOOST_NO_LONG_LONG
// C++ features supported by VC++ 10 (aka 2010)
//
#if _MSC_VER < 1600
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
# define BOOST_NO_CXX11_LAMBDAS
# define BOOST_NO_CXX11_RVALUE_REFERENCES
# define BOOST_NO_CXX11_STATIC_ASSERT
# define BOOST_NO_CXX11_NULLPTR
# define BOOST_NO_CXX11_DECLTYPE
#endif // _MSC_VER < 1600
#if _MSC_VER >= 1600
# define BOOST_HAS_STDINT_H
#endif
// C++11 features supported by VC++ 11 (aka 2012)
//
#if _MSC_VER < 1700
# define BOOST_NO_CXX11_FINAL
# define BOOST_NO_CXX11_RANGE_BASED_FOR
# define BOOST_NO_CXX11_SCOPED_ENUMS
#endif // _MSC_VER < 1700
// C++11 features supported by VC++ 12 (aka 2013).
//
#if _MSC_FULL_VER < 180020827
# define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
# define BOOST_NO_CXX11_DELETED_FUNCTIONS
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
# define BOOST_NO_CXX11_RAW_LITERALS
# define BOOST_NO_CXX11_TEMPLATE_ALIASES
# define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
# define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
# define BOOST_NO_CXX11_DECLTYPE_N3276
#endif
#if _MSC_FULL_VER >= 180020827
#define BOOST_HAS_EXPM1
#define BOOST_HAS_LOG1P
#endif
// C++11 features supported by VC++ 14 (aka 2015)
//
#if (_MSC_FULL_VER < 190023026)
# define BOOST_NO_CXX11_NOEXCEPT
# define BOOST_NO_CXX11_DEFAULTED_MOVES
# define BOOST_NO_CXX11_REF_QUALIFIERS
# define BOOST_NO_CXX11_USER_DEFINED_LITERALS
# define BOOST_NO_CXX11_ALIGNAS
# define BOOST_NO_CXX11_INLINE_NAMESPACES
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_CHAR32_T
# define BOOST_NO_CXX11_UNICODE_LITERALS
# define BOOST_NO_CXX14_DECLTYPE_AUTO
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
# define BOOST_NO_CXX14_BINARY_LITERALS
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
# define BOOST_NO_CXX11_THREAD_LOCAL
# define BOOST_NO_CXX11_UNRESTRICTED_UNION
#endif
// C++11 features supported by VC++ 14 update 3 (aka 2015)
//
#if (_MSC_FULL_VER < 190024210)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
# define BOOST_NO_SFINAE_EXPR
# define BOOST_NO_CXX11_CONSTEXPR
#endif
// C++14 features supported by VC++ 14.1 (Visual Studio 2017)
//
#if (_MSC_VER < 1910)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
// C++17 features supported by VC++ 14.1 (Visual Studio 2017) Update 3
//
#if (_MSC_VER < 1911) || (_MSVC_LANG < 201703)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
# define BOOST_NO_CXX17_IF_CONSTEXPR
// Let the defaults handle these now:
//# define BOOST_NO_CXX17_HDR_OPTIONAL
//# define BOOST_NO_CXX17_HDR_STRING_VIEW
#endif
// MSVC including version 14 has not yet completely
// implemented value-initialization, as is reported:
// "VC++ does not value-initialize members of derived classes without
// user-declared constructor", reported in 2009 by Sylvester Hesp:
// https://connect.microsoft.com/VisualStudio/feedback/details/484295
// "Presence of copy constructor breaks member class initialization",
// reported in 2009 by Alex Vakulenko:
// https://connect.microsoft.com/VisualStudio/feedback/details/499606
// "Value-initialization in new-expression", reported in 2005 by
// Pavel Kuznetsov (MetaCommunications Engineering):
// https://connect.microsoft.com/VisualStudio/feedback/details/100744
// Reported again by John Maddock in 2015 for VC14:
// https://connect.microsoft.com/VisualStudio/feedback/details/1582233/c-subobjects-still-not-value-initialized-correctly
// See also: http://www.boost.org/libs/utility/value_init.htm#compiler_issues
// (Niels Dekker, LKEB, May 2010)
// Still present in VC15.5, Dec 2017.
#define BOOST_NO_COMPLETE_VALUE_INITIALIZATION
//
// C++ 11:
//
// This is supported with /permissive- for 15.5 onwards, unfortunately we appear to have no way to tell
// if this is in effect or not, in any case nothing in Boost is currently using this, so we'll just go
// on defining it for now:
//
# define BOOST_NO_TWO_PHASE_NAME_LOOKUP
#if (_MSC_VER < 1912) || (_MSVC_LANG < 201402)
// Supported from msvc-15.5 onwards:
#define BOOST_NO_CXX11_SFINAE_EXPR
#endif
#if (_MSC_VER < 1915) || (_MSVC_LANG < 201402)
// C++ 14:
// Still gives internal compiler error for msvc-15.5:
# define BOOST_NO_CXX14_CONSTEXPR
#endif
// C++ 17:
#if (_MSC_VER < 1912) || (_MSVC_LANG < 201703)
#define BOOST_NO_CXX17_INLINE_VARIABLES
#define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
//
// Things that don't work in clr mode:
//
#ifdef _M_CEE
#ifndef BOOST_NO_CXX11_THREAD_LOCAL
# define BOOST_NO_CXX11_THREAD_LOCAL
#endif
#ifndef BOOST_NO_SFINAE_EXPR
# define BOOST_NO_SFINAE_EXPR
#endif
#ifndef BOOST_NO_CXX11_REF_QUALIFIERS
# define BOOST_NO_CXX11_REF_QUALIFIERS
#endif
#endif
#ifdef _M_CEE_PURE
#ifndef BOOST_NO_CXX11_CONSTEXPR
# define BOOST_NO_CXX11_CONSTEXPR
#endif
#endif
//
// prefix and suffix headers:
//
#ifndef BOOST_ABI_PREFIX
# define BOOST_ABI_PREFIX "boost/config/abi/msvc_prefix.hpp"
#endif
#ifndef BOOST_ABI_SUFFIX
# define BOOST_ABI_SUFFIX "boost/config/abi/msvc_suffix.hpp"
#endif
#ifndef BOOST_COMPILER
// TODO:
// these things are mostly bogus. 1200 means version 12.0 of the compiler. The
// artificial versions assigned to them only refer to the versions of some IDE
// these compilers have been shipped with, and even that is not all of it. Some
// were shipped with freely downloadable SDKs, others as crosscompilers in eVC.
// IOW, you can't use these 'versions' in any sensible way. Sorry.
# if defined(UNDER_CE)
# if _MSC_VER < 1400
// Note: I'm not aware of any CE compiler with version 13xx
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown EVC++ compiler version - please run the configure tests and report the results"
# else
# pragma message("boost: Unknown EVC++ compiler version - please run the configure tests and report the results")
# endif
# elif _MSC_VER < 1500
# define BOOST_COMPILER_VERSION evc8
# elif _MSC_VER < 1600
# define BOOST_COMPILER_VERSION evc9
# elif _MSC_VER < 1700
# define BOOST_COMPILER_VERSION evc10
# elif _MSC_VER < 1800
# define BOOST_COMPILER_VERSION evc11
# elif _MSC_VER < 1900
# define BOOST_COMPILER_VERSION evc12
# elif _MSC_VER < 2000
# define BOOST_COMPILER_VERSION evc14
# else
# if defined(BOOST_ASSERT_CONFIG)
# error "boost: Unknown EVC++ compiler version - please run the configure tests and report the results"
# else
# pragma message("boost: Unknown EVC++ compiler version - please run the configure tests and report the results")
# endif
# endif
# else
# if _MSC_VER < 1200
// Note: Versions up to 10.0 aren't supported.
# define BOOST_COMPILER_VERSION 5.0
# elif _MSC_VER < 1300
# define BOOST_COMPILER_VERSION 6.0
# elif _MSC_VER < 1310
# define BOOST_COMPILER_VERSION 7.0
# elif _MSC_VER < 1400
# define BOOST_COMPILER_VERSION 7.1
# elif _MSC_VER < 1500
# define BOOST_COMPILER_VERSION 8.0
# elif _MSC_VER < 1600
# define BOOST_COMPILER_VERSION 9.0
# elif _MSC_VER < 1700
# define BOOST_COMPILER_VERSION 10.0
# elif _MSC_VER < 1800
# define BOOST_COMPILER_VERSION 11.0
# elif _MSC_VER < 1900
# define BOOST_COMPILER_VERSION 12.0
# elif _MSC_VER < 1910
# define BOOST_COMPILER_VERSION 14.0
# elif _MSC_VER < 1920
# define BOOST_COMPILER_VERSION 14.1
# elif _MSC_VER < 1930
# define BOOST_COMPILER_VERSION 14.2
# else
# define BOOST_COMPILER_VERSION _MSC_VER
# endif
# endif
# define BOOST_COMPILER "Microsoft Visual C++ version " BOOST_STRINGIZE(BOOST_COMPILER_VERSION)
#endif
#include <boost/config/pragma_message.hpp>
//
// last known and checked version is 19.20.27508 (VC++ 2019 RC3):
#if (_MSC_VER > 1920)
# if defined(BOOST_ASSERT_CONFIG)
# error "Boost.Config is older than your current compiler version."
# elif !defined(BOOST_CONFIG_SUPPRESS_OUTDATED_MESSAGE)
//
// Disabled as of March 2018 - the pace of VS releases is hard to keep up with
// and in any case, we have relatively few defect macros defined now.
// BOOST_PRAGMA_MESSAGE("Info: Boost.Config is older than your compiler version - probably nothing bad will happen - but you may wish to look for an updated Boost version. Define BOOST_CONFIG_SUPPRESS_OUTDATED_MESSAGE to suppress this message.")
# endif
#endif

View File

@@ -1,289 +0,0 @@
// (C) Copyright Douglas Gregor 2010
//
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// compiler setup for IBM XL C/C++ for Linux (Little Endian) based on clang.
#define BOOST_HAS_PRAGMA_ONCE
// Detecting `-fms-extension` compiler flag assuming that _MSC_VER defined when that flag is used.
#if defined (_MSC_VER) && (__clang_major__ > 3 || (__clang_major__ == 3 && __clang_minor__ >= 4))
# define BOOST_HAS_PRAGMA_DETECT_MISMATCH
#endif
// When compiling with clang before __has_extension was defined,
// even if one writes 'defined(__has_extension) && __has_extension(xxx)',
// clang reports a compiler error. So the only workaround found is:
#ifndef __has_extension
#define __has_extension __has_feature
#endif
#ifndef __has_cpp_attribute
#define __has_cpp_attribute(x) 0
#endif
#if !__has_feature(cxx_exceptions) && !defined(BOOST_NO_EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
#if !__has_feature(cxx_rtti) && !defined(BOOST_NO_RTTI)
# define BOOST_NO_RTTI
#endif
#if !__has_feature(cxx_rtti) && !defined(BOOST_NO_TYPEID)
# define BOOST_NO_TYPEID
#endif
#if defined(__int64) && !defined(__GNUC__)
# define BOOST_HAS_MS_INT64
#endif
#define BOOST_HAS_NRVO
// Branch prediction hints
#if defined(__has_builtin)
#if __has_builtin(__builtin_expect)
#define BOOST_LIKELY(x) __builtin_expect(x, 1)
#define BOOST_UNLIKELY(x) __builtin_expect(x, 0)
#endif
#endif
// Clang supports "long long" in all compilation modes.
#define BOOST_HAS_LONG_LONG
//
// Dynamic shared object (DSO) and dynamic-link library (DLL) support
//
#if !defined(_WIN32) && !defined(__WIN32__) && !defined(WIN32)
# define BOOST_SYMBOL_EXPORT __attribute__((__visibility__("default")))
# define BOOST_SYMBOL_IMPORT
# define BOOST_SYMBOL_VISIBLE __attribute__((__visibility__("default")))
#endif
//
// The BOOST_FALLTHROUGH macro can be used to annotate implicit fall-through
// between switch labels.
//
#if __cplusplus >= 201103L && defined(__has_warning)
# if __has_feature(cxx_attributes) && __has_warning("-Wimplicit-fallthrough")
# define BOOST_FALLTHROUGH [[clang::fallthrough]]
# endif
#endif
#if !__has_feature(cxx_auto_type)
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
#endif
//
// Currently clang on Windows using VC++ RTL does not support C++11's char16_t or char32_t
//
#if defined(_MSC_VER) || !(defined(__GXX_EXPERIMENTAL_CXX0X__) || __cplusplus >= 201103L)
# define BOOST_NO_CXX11_CHAR16_T
# define BOOST_NO_CXX11_CHAR32_T
#endif
#if !__has_feature(cxx_constexpr)
# define BOOST_NO_CXX11_CONSTEXPR
#endif
#if !__has_feature(cxx_decltype)
# define BOOST_NO_CXX11_DECLTYPE
#endif
#if !__has_feature(cxx_decltype_incomplete_return_types)
# define BOOST_NO_CXX11_DECLTYPE_N3276
#endif
#if !__has_feature(cxx_defaulted_functions)
# define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
#endif
#if !__has_feature(cxx_deleted_functions)
# define BOOST_NO_CXX11_DELETED_FUNCTIONS
#endif
#if !__has_feature(cxx_explicit_conversions)
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#endif
#if !__has_feature(cxx_default_function_template_args)
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#endif
#if !__has_feature(cxx_generalized_initializers)
# define BOOST_NO_CXX11_HDR_INITIALIZER_LIST
#endif
#if !__has_feature(cxx_lambdas)
# define BOOST_NO_CXX11_LAMBDAS
#endif
#if !__has_feature(cxx_local_type_template_args)
# define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#endif
#if !__has_feature(cxx_noexcept)
# define BOOST_NO_CXX11_NOEXCEPT
#endif
#if !__has_feature(cxx_nullptr)
# define BOOST_NO_CXX11_NULLPTR
#endif
#if !__has_feature(cxx_range_for)
# define BOOST_NO_CXX11_RANGE_BASED_FOR
#endif
#if !__has_feature(cxx_raw_string_literals)
# define BOOST_NO_CXX11_RAW_LITERALS
#endif
#if !__has_feature(cxx_reference_qualified_functions)
# define BOOST_NO_CXX11_REF_QUALIFIERS
#endif
#if !__has_feature(cxx_generalized_initializers)
# define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#endif
#if !__has_feature(cxx_rvalue_references)
# define BOOST_NO_CXX11_RVALUE_REFERENCES
#endif
#if !__has_feature(cxx_strong_enums)
# define BOOST_NO_CXX11_SCOPED_ENUMS
#endif
#if !__has_feature(cxx_static_assert)
# define BOOST_NO_CXX11_STATIC_ASSERT
#endif
#if !__has_feature(cxx_alias_templates)
# define BOOST_NO_CXX11_TEMPLATE_ALIASES
#endif
#if !__has_feature(cxx_unicode_literals)
# define BOOST_NO_CXX11_UNICODE_LITERALS
#endif
#if !__has_feature(cxx_variadic_templates)
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
#endif
#if !__has_feature(cxx_user_literals)
# define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#endif
#if !__has_feature(cxx_alignas)
# define BOOST_NO_CXX11_ALIGNAS
#endif
#if !__has_feature(cxx_trailing_return)
# define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#endif
#if !__has_feature(cxx_inline_namespaces)
# define BOOST_NO_CXX11_INLINE_NAMESPACES
#endif
#if !__has_feature(cxx_override_control)
# define BOOST_NO_CXX11_FINAL
#endif
#if !__has_feature(cxx_unrestricted_unions)
# define BOOST_NO_CXX11_UNRESTRICTED_UNION
#endif
#if !(__has_feature(__cxx_binary_literals__) || __has_extension(__cxx_binary_literals__))
# define BOOST_NO_CXX14_BINARY_LITERALS
#endif
#if !__has_feature(__cxx_decltype_auto__)
# define BOOST_NO_CXX14_DECLTYPE_AUTO
#endif
#if !__has_feature(__cxx_aggregate_nsdmi__)
# define BOOST_NO_CXX14_AGGREGATE_NSDMI
#endif
#if !__has_feature(__cxx_init_captures__)
# define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#endif
#if !__has_feature(__cxx_generic_lambdas__)
# define BOOST_NO_CXX14_GENERIC_LAMBDAS
#endif
// clang < 3.5 has a defect with dependent type, like following.
//
// template <class T>
// constexpr typename enable_if<pred<T> >::type foo(T &)
// { } // error: no return statement in constexpr function
//
// This issue also affects C++11 mode, but C++11 constexpr requires return stmt.
// Therefore we don't care such case.
//
// Note that we can't check Clang version directly as the numbering system changes depending who's
// creating the Clang release (see https://github.com/boostorg/config/pull/39#issuecomment-59927873)
// so instead verify that we have a feature that was introduced at the same time as working C++14
// constexpr (generic lambda's in this case):
//
#if !__has_feature(__cxx_generic_lambdas__) || !__has_feature(__cxx_relaxed_constexpr__)
# define BOOST_NO_CXX14_CONSTEXPR
#endif
#if !__has_feature(__cxx_return_type_deduction__)
# define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#endif
#if !__has_feature(__cxx_variable_templates__)
# define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#endif
#if !defined(__cpp_structured_bindings) || (__cpp_structured_bindings < 201606)
# define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#endif
#if !defined(__cpp_if_constexpr) || (__cpp_if_constexpr < 201606)
# define BOOST_NO_CXX17_IF_CONSTEXPR
#endif
// Clang 3.9+ in c++1z
#if !__has_cpp_attribute(fallthrough) || __cplusplus < 201406L
# define BOOST_NO_CXX17_INLINE_VARIABLES
# define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#endif
#if !__has_feature(cxx_thread_local)
# define BOOST_NO_CXX11_THREAD_LOCAL
#endif
#if __cplusplus < 201400
// All versions with __cplusplus above this value seem to support this:
# define BOOST_NO_CXX14_DIGIT_SEPARATORS
#endif
// Unused attribute:
#if defined(__GNUC__) && (__GNUC__ >= 4)
# define BOOST_ATTRIBUTE_UNUSED __attribute__((unused))
#endif
// Type aliasing hint.
#if __has_attribute(__may_alias__)
# define BOOST_MAY_ALIAS __attribute__((__may_alias__))
#endif
#ifndef BOOST_COMPILER
# define BOOST_COMPILER "Clang version " __clang_version__
#endif
// Macro used to identify the Clang compiler.
#define BOOST_CLANG 1

View File

@@ -1,171 +0,0 @@
// Copyright (c) 2017 Dynatrace
//
// Distributed under the Boost Software License, Version 1.0.
// See accompanying file LICENSE_1_0.txt or copy at
// http://www.boost.org/LICENSE_1_0.txt
// See http://www.boost.org for most recent version.
// Compiler setup for IBM z/OS XL C/C++ compiler.
// Oldest compiler version currently supported is 2.1 (V2R1)
#if !defined(__IBMCPP__) || !defined(__COMPILER_VER__) || __COMPILER_VER__ < 0x42010000
# error "Compiler not supported or configured - please reconfigure"
#endif
#if __COMPILER_VER__ > 0x42010000
# if defined(BOOST_ASSERT_CONFIG)
# error "Unknown compiler version - please run the configure tests and report the results"
# endif
#endif
#define BOOST_COMPILER "IBM z/OS XL C/C++ version " BOOST_STRINGIZE(__COMPILER_VER__)
#define BOOST_XLCPP_ZOS __COMPILER_VER__
// -------------------------------------
#include <features.h> // For __UU, __C99, __TR1, ...
#if !defined(__IBMCPP_DEFAULTED_AND_DELETED_FUNCTIONS)
# define BOOST_NO_CXX11_DELETED_FUNCTIONS
# define BOOST_NO_CXX11_DEFAULTED_FUNCTIONS
# define BOOST_NO_CXX11_NON_PUBLIC_DEFAULTED_FUNCTIONS
#endif
// -------------------------------------
#if defined(__UU) || defined(__C99) || defined(__TR1)
# define BOOST_HAS_LOG1P
# define BOOST_HAS_EXPM1
#endif
#if defined(__C99) || defined(__TR1)
# define BOOST_HAS_STDINT_H
#else
# define BOOST_NO_FENV_H
#endif
// -------------------------------------
#define BOOST_HAS_NRVO
#if !defined(__RTTI_ALL__)
# define BOOST_NO_RTTI
#endif
#if !defined(_CPPUNWIND) && !defined(__EXCEPTIONS)
# define BOOST_NO_EXCEPTIONS
#endif
#if defined(_LONG_LONG) || defined(__IBMCPP_C99_LONG_LONG) || defined(__LL)
# define BOOST_HAS_LONG_LONG
#else
# define BOOST_NO_LONG_LONG
#endif
#if defined(_LONG_LONG) || defined(__IBMCPP_C99_LONG_LONG) || defined(__LL) || defined(_LP64)
# define BOOST_HAS_MS_INT64
#endif
#define BOOST_NO_SFINAE_EXPR
#define BOOST_NO_CXX11_SFINAE_EXPR
#if defined(__IBMCPP_VARIADIC_TEMPLATES)
# define BOOST_HAS_VARIADIC_TMPL
#else
# define BOOST_NO_CXX11_VARIADIC_TEMPLATES
# define BOOST_NO_CXX11_FUNCTION_TEMPLATE_DEFAULT_ARGS
#endif
#if defined(__IBMCPP_STATIC_ASSERT)
# define BOOST_HAS_STATIC_ASSERT
#else
# define BOOST_NO_CXX11_STATIC_ASSERT
#endif
#if defined(__IBMCPP_RVALUE_REFERENCES)
# define BOOST_HAS_RVALUE_REFS
#else
# define BOOST_NO_CXX11_RVALUE_REFERENCES
#endif
#if !defined(__IBMCPP_SCOPED_ENUM)
# define BOOST_NO_CXX11_SCOPED_ENUMS
#endif
#define BOOST_NO_CXX11_FIXED_LENGTH_VARIADIC_TEMPLATE_EXPANSION_PACKS
#define BOOST_NO_CXX11_TEMPLATE_ALIASES
#define BOOST_NO_CXX11_LOCAL_CLASS_TEMPLATE_PARAMETERS
#if !defined(__IBMCPP_EXPLICIT_CONVERSION_OPERATORS)
# define BOOST_NO_CXX11_EXPLICIT_CONVERSION_OPERATORS
#endif
#if !defined(__IBMCPP_DECLTYPE)
# define BOOST_NO_CXX11_DECLTYPE
#else
# define BOOST_HAS_DECLTYPE
#endif
#define BOOST_NO_CXX11_DECLTYPE_N3276
#if !defined(__IBMCPP_INLINE_NAMESPACE)
# define BOOST_NO_CXX11_INLINE_NAMESPACES
#endif
#if !defined(__IBMCPP_AUTO_TYPEDEDUCTION)
# define BOOST_NO_CXX11_AUTO_MULTIDECLARATIONS
# define BOOST_NO_CXX11_AUTO_DECLARATIONS
# define BOOST_NO_CXX11_TRAILING_RESULT_TYPES
#endif
#if !defined(__IBM_CHAR32_T__)
# define BOOST_NO_CXX11_CHAR32_T
#endif
#if !defined(__IBM_CHAR16_T__)
# define BOOST_NO_CXX11_CHAR16_T
#endif
#if !defined(__IBMCPP_CONSTEXPR)
# define BOOST_NO_CXX11_CONSTEXPR
#endif
#define BOOST_NO_CXX11_UNIFIED_INITIALIZATION_SYNTAX
#define BOOST_NO_CXX11_UNICODE_LITERALS
#define BOOST_NO_CXX11_RAW_LITERALS
#define BOOST_NO_CXX11_RANGE_BASED_FOR
#define BOOST_NO_CXX11_NULLPTR
#define BOOST_NO_CXX11_NOEXCEPT
#define BOOST_NO_CXX11_LAMBDAS
#define BOOST_NO_CXX11_USER_DEFINED_LITERALS
#define BOOST_NO_CXX11_THREAD_LOCAL
#define BOOST_NO_CXX11_REF_QUALIFIERS
#define BOOST_NO_CXX11_FINAL
#define BOOST_NO_CXX11_ALIGNAS
#define BOOST_NO_CXX11_UNRESTRICTED_UNION
#define BOOST_NO_CXX14_VARIABLE_TEMPLATES
#define BOOST_NO_CXX14_RETURN_TYPE_DEDUCTION
#define BOOST_NO_CXX14_AGGREGATE_NSDMI
#define BOOST_NO_CXX14_INITIALIZED_LAMBDA_CAPTURES
#define BOOST_NO_CXX14_GENERIC_LAMBDAS
#define BOOST_NO_CXX14_DIGIT_SEPARATORS
#define BOOST_NO_CXX14_DECLTYPE_AUTO
#define BOOST_NO_CXX14_CONSTEXPR
#define BOOST_NO_CXX14_BINARY_LITERALS
#define BOOST_NO_CXX17_STRUCTURED_BINDINGS
#define BOOST_NO_CXX17_INLINE_VARIABLES
#define BOOST_NO_CXX17_FOLD_EXPRESSIONS
#define BOOST_NO_CXX17_IF_CONSTEXPR
// -------------------------------------
#if defined(__IBM_ATTRIBUTES)
# define BOOST_FORCEINLINE inline __attribute__ ((__always_inline__))
# define BOOST_NOINLINE __attribute__ ((__noinline__))
# define BOOST_MAY_ALIAS __attribute__((__may_alias__))
// No BOOST_ALIGNMENT - explicit alignment support is broken (V2R1).
#endif
extern "builtin" long __builtin_expect(long, long);
#define BOOST_LIKELY(x) __builtin_expect((x) && true, 1)
#define BOOST_UNLIKELY(x) __builtin_expect((x) && true, 0)

View File

@@ -1,95 +0,0 @@
// (C) Copyright John Maddock 2001 - 2003.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// All POSIX feature tests go in this file,
// Note that we test _POSIX_C_SOURCE and _XOPEN_SOURCE as well
// _POSIX_VERSION and _XOPEN_VERSION: on some systems POSIX API's
// may be present but none-functional unless _POSIX_C_SOURCE and
// _XOPEN_SOURCE have been defined to the right value (it's up
// to the user to do this *before* including any header, although
// in most cases the compiler will do this for you).
# if defined(BOOST_HAS_UNISTD_H)
# include <unistd.h>
// XOpen has <nl_types.h>, but is this the correct version check?
# if defined(_XOPEN_VERSION) && (_XOPEN_VERSION >= 3)
# define BOOST_HAS_NL_TYPES_H
# endif
// POSIX version 6 requires <stdint.h>
# if defined(_POSIX_VERSION) && (_POSIX_VERSION >= 200100)
# define BOOST_HAS_STDINT_H
# endif
// POSIX version 2 requires <dirent.h>
# if defined(_POSIX_VERSION) && (_POSIX_VERSION >= 199009L)
# define BOOST_HAS_DIRENT_H
# endif
// POSIX version 3 requires <signal.h> to have sigaction:
# if defined(_POSIX_VERSION) && (_POSIX_VERSION >= 199506L)
# define BOOST_HAS_SIGACTION
# endif
// POSIX defines _POSIX_THREADS > 0 for pthread support,
// however some platforms define _POSIX_THREADS without
// a value, hence the (_POSIX_THREADS+0 >= 0) check.
// Strictly speaking this may catch platforms with a
// non-functioning stub <pthreads.h>, but such occurrences should
// occur very rarely if at all.
# if defined(_POSIX_THREADS) && (_POSIX_THREADS+0 >= 0) && !defined(BOOST_HAS_WINTHREADS) && !defined(BOOST_HAS_MPTASKS)
# define BOOST_HAS_PTHREADS
# endif
// BOOST_HAS_NANOSLEEP:
// This is predicated on _POSIX_TIMERS or _XOPEN_REALTIME:
# if (defined(_POSIX_TIMERS) && (_POSIX_TIMERS+0 >= 0)) \
|| (defined(_XOPEN_REALTIME) && (_XOPEN_REALTIME+0 >= 0))
# define BOOST_HAS_NANOSLEEP
# endif
// BOOST_HAS_CLOCK_GETTIME:
// This is predicated on _POSIX_TIMERS (also on _XOPEN_REALTIME
// but at least one platform - linux - defines that flag without
// defining clock_gettime):
# if (defined(_POSIX_TIMERS) && (_POSIX_TIMERS+0 >= 0))
# define BOOST_HAS_CLOCK_GETTIME
# endif
// BOOST_HAS_SCHED_YIELD:
// This is predicated on _POSIX_PRIORITY_SCHEDULING or
// on _POSIX_THREAD_PRIORITY_SCHEDULING or on _XOPEN_REALTIME.
# if defined(_POSIX_PRIORITY_SCHEDULING) && (_POSIX_PRIORITY_SCHEDULING+0 > 0)\
|| (defined(_POSIX_THREAD_PRIORITY_SCHEDULING) && (_POSIX_THREAD_PRIORITY_SCHEDULING+0 > 0))\
|| (defined(_XOPEN_REALTIME) && (_XOPEN_REALTIME+0 >= 0))
# define BOOST_HAS_SCHED_YIELD
# endif
// BOOST_HAS_GETTIMEOFDAY:
// BOOST_HAS_PTHREAD_MUTEXATTR_SETTYPE:
// These are predicated on _XOPEN_VERSION, and appears to be first released
// in issue 4, version 2 (_XOPEN_VERSION > 500).
// Likewise for the functions log1p and expm1.
# if defined(_XOPEN_VERSION) && (_XOPEN_VERSION+0 >= 500)
# define BOOST_HAS_GETTIMEOFDAY
# if defined(_XOPEN_SOURCE) && (_XOPEN_SOURCE+0 >= 500)
# define BOOST_HAS_PTHREAD_MUTEXATTR_SETTYPE
# endif
# ifndef BOOST_HAS_LOG1P
# define BOOST_HAS_LOG1P
# endif
# ifndef BOOST_HAS_EXPM1
# define BOOST_HAS_EXPM1
# endif
# endif
# endif

View File

@@ -1,157 +0,0 @@
// Boost compiler configuration selection header file
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright Martin Wille 2003.
// (C) Copyright Guillaume Melquiond 2003.
//
// Distributed under the Boost Software License, Version 1.0.
// (See accompanying file LICENSE_1_0.txt or copy at
// http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org/ for most recent version.
// locate which compiler we are using and define
// BOOST_COMPILER_CONFIG as needed:
#if defined __CUDACC__
// NVIDIA CUDA C++ compiler for GPU
# include "boost/config/compiler/nvcc.hpp"
#endif
#if defined(__GCCXML__)
// GCC-XML emulates other compilers, it has to appear first here!
# define BOOST_COMPILER_CONFIG "boost/config/compiler/gcc_xml.hpp"
#elif defined(_CRAYC)
// EDG based Cray compiler:
# define BOOST_COMPILER_CONFIG "boost/config/compiler/cray.hpp"
#elif defined __COMO__
// Comeau C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/comeau.hpp"
#elif defined(__PATHSCALE__) && (__PATHCC__ >= 4)
// PathScale EKOPath compiler (has to come before clang and gcc)
# define BOOST_COMPILER_CONFIG "boost/config/compiler/pathscale.hpp"
#elif defined(__INTEL_COMPILER) || defined(__ICL) || defined(__ICC) || defined(__ECC)
// Intel
# define BOOST_COMPILER_CONFIG "boost/config/compiler/intel.hpp"
#elif defined __clang__ && !defined(__ibmxl__)
// Clang C++ emulates GCC, so it has to appear early.
# define BOOST_COMPILER_CONFIG "boost/config/compiler/clang.hpp"
#elif defined __DMC__
// Digital Mars C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/digitalmars.hpp"
#elif defined __DCC__
// Wind River Diab C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/diab.hpp"
#elif defined(__PGI)
// Portland Group Inc.
# define BOOST_COMPILER_CONFIG "boost/config/compiler/pgi.hpp"
# elif defined(__GNUC__) && !defined(__ibmxl__)
// GNU C++:
# define BOOST_COMPILER_CONFIG "boost/config/compiler/gcc.hpp"
#elif defined __KCC
// Kai C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/kai.hpp"
#elif defined __sgi
// SGI MIPSpro C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/sgi_mipspro.hpp"
#elif defined __DECCXX
// Compaq Tru64 Unix cxx
# define BOOST_COMPILER_CONFIG "boost/config/compiler/compaq_cxx.hpp"
#elif defined __ghs
// Greenhills C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/greenhills.hpp"
#elif defined __CODEGEARC__
// CodeGear - must be checked for before Borland
# define BOOST_COMPILER_CONFIG "boost/config/compiler/codegear.hpp"
#elif defined __BORLANDC__
// Borland
# define BOOST_COMPILER_CONFIG "boost/config/compiler/borland.hpp"
#elif defined __MWERKS__
// Metrowerks CodeWarrior
# define BOOST_COMPILER_CONFIG "boost/config/compiler/metrowerks.hpp"
#elif defined __SUNPRO_CC
// Sun Workshop Compiler C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/sunpro_cc.hpp"
#elif defined __HP_aCC
// HP aCC
# define BOOST_COMPILER_CONFIG "boost/config/compiler/hp_acc.hpp"
#elif defined(__MRC__) || defined(__SC__)
// MPW MrCpp or SCpp
# define BOOST_COMPILER_CONFIG "boost/config/compiler/mpw.hpp"
#elif defined(__IBMCPP__) && defined(__COMPILER_VER__) && defined(__MVS__)
// IBM z/OS XL C/C++
# define BOOST_COMPILER_CONFIG "boost/config/compiler/xlcpp_zos.hpp"
#elif defined(__ibmxl__)
// IBM XL C/C++ for Linux (Little Endian)
# define BOOST_COMPILER_CONFIG "boost/config/compiler/xlcpp.hpp"
#elif defined(__IBMCPP__)
// IBM Visual Age or IBM XL C/C++ for Linux (Big Endian)
# define BOOST_COMPILER_CONFIG "boost/config/compiler/vacpp.hpp"
#elif defined _MSC_VER
// Microsoft Visual C++
//
// Must remain the last #elif since some other vendors (Metrowerks, for
// example) also #define _MSC_VER
# define BOOST_COMPILER_CONFIG "boost/config/compiler/visualc.hpp"
#elif defined (BOOST_ASSERT_CONFIG)
// this must come last - generate an error if we don't
// recognise the compiler:
# error "Unknown compiler - please configure (http://www.boost.org/libs/config/config.htm#configuring) and report the results to the main boost mailing list (http://www.boost.org/more/mailing_lists.htm#main)"
#endif
#if 0
//
// This section allows dependency scanners to find all the headers we *might* include:
//
#include <boost/config/compiler/gcc_xml.hpp>
#include <boost/config/compiler/cray.hpp>
#include <boost/config/compiler/comeau.hpp>
#include <boost/config/compiler/pathscale.hpp>
#include <boost/config/compiler/intel.hpp>
#include <boost/config/compiler/clang.hpp>
#include <boost/config/compiler/digitalmars.hpp>
#include <boost/config/compiler/gcc.hpp>
#include <boost/config/compiler/kai.hpp>
#include <boost/config/compiler/sgi_mipspro.hpp>
#include <boost/config/compiler/compaq_cxx.hpp>
#include <boost/config/compiler/greenhills.hpp>
#include <boost/config/compiler/codegear.hpp>
#include <boost/config/compiler/borland.hpp>
#include <boost/config/compiler/metrowerks.hpp>
#include <boost/config/compiler/sunpro_cc.hpp>
#include <boost/config/compiler/hp_acc.hpp>
#include <boost/config/compiler/mpw.hpp>
#include <boost/config/compiler/xlcpp_zos.hpp>
#include <boost/config/compiler/xlcpp.hpp>
#include <boost/config/compiler/vacpp.hpp>
#include <boost/config/compiler/pgi.hpp>
#include <boost/config/compiler/visualc.hpp>
#endif

View File

@@ -1,142 +0,0 @@
// Boost compiler configuration selection header file
// (C) Copyright John Maddock 2001 - 2002.
// (C) Copyright Jens Maurer 2001.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// locate which platform we are on and define BOOST_PLATFORM_CONFIG as needed.
// Note that we define the headers to include using "header_name" not
// <header_name> in order to prevent macro expansion within the header
// name (for example "linux" is a macro on linux systems).
#if (defined(linux) || defined(__linux) || defined(__linux__) || defined(__GNU__) || defined(__GLIBC__)) && !defined(_CRAYC)
// linux, also other platforms (Hurd etc) that use GLIBC, should these really have their own config headers though?
# define BOOST_PLATFORM_CONFIG "boost/config/platform/linux.hpp"
#elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__)
// BSD:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/bsd.hpp"
#elif defined(sun) || defined(__sun)
// solaris:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/solaris.hpp"
#elif defined(__sgi)
// SGI Irix:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/irix.hpp"
#elif defined(__hpux)
// hp unix:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/hpux.hpp"
#elif defined(__CYGWIN__)
// cygwin is not win32:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/cygwin.hpp"
#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
// win32:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/win32.hpp"
#elif defined(__HAIKU__)
// Haiku
# define BOOST_PLATFORM_CONFIG "boost/config/platform/haiku.hpp"
#elif defined(__BEOS__)
// BeOS
# define BOOST_PLATFORM_CONFIG "boost/config/platform/beos.hpp"
#elif defined(macintosh) || defined(__APPLE__) || defined(__APPLE_CC__)
// MacOS
# define BOOST_PLATFORM_CONFIG "boost/config/platform/macos.hpp"
#elif defined(__TOS_MVS__)
// IBM z/OS
# define BOOST_PLATFORM_CONFIG "boost/config/platform/zos.hpp"
#elif defined(__IBMCPP__) || defined(_AIX)
// IBM AIX
# define BOOST_PLATFORM_CONFIG "boost/config/platform/aix.hpp"
#elif defined(__amigaos__)
// AmigaOS
# define BOOST_PLATFORM_CONFIG "boost/config/platform/amigaos.hpp"
#elif defined(__QNXNTO__)
// QNX:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/qnxnto.hpp"
#elif defined(__VXWORKS__)
// vxWorks:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/vxworks.hpp"
#elif defined(__SYMBIAN32__)
// Symbian:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/symbian.hpp"
#elif defined(_CRAYC)
// Cray:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/cray.hpp"
#elif defined(__VMS)
// VMS:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/vms.hpp"
#elif defined(__CloudABI__)
// Nuxi CloudABI:
# define BOOST_PLATFORM_CONFIG "boost/config/platform/cloudabi.hpp"
#else
# if defined(unix) \
|| defined(__unix) \
|| defined(_XOPEN_SOURCE) \
|| defined(_POSIX_SOURCE)
// generic unix platform:
# ifndef BOOST_HAS_UNISTD_H
# define BOOST_HAS_UNISTD_H
# endif
# include <boost/config/detail/posix_features.hpp>
# endif
# if defined (BOOST_ASSERT_CONFIG)
// this must come last - generate an error if we don't
// recognise the platform:
# error "Unknown platform - please configure and report the results to boost.org"
# endif
#endif
#if 0
//
// This section allows dependency scanners to find all the files we *might* include:
//
# include "boost/config/platform/linux.hpp"
# include "boost/config/platform/bsd.hpp"
# include "boost/config/platform/solaris.hpp"
# include "boost/config/platform/irix.hpp"
# include "boost/config/platform/hpux.hpp"
# include "boost/config/platform/cygwin.hpp"
# include "boost/config/platform/win32.hpp"
# include "boost/config/platform/beos.hpp"
# include "boost/config/platform/macos.hpp"
# include "boost/config/platform/zos.hpp"
# include "boost/config/platform/aix.hpp"
# include "boost/config/platform/amigaos.hpp"
# include "boost/config/platform/qnxnto.hpp"
# include "boost/config/platform/vxworks.hpp"
# include "boost/config/platform/symbian.hpp"
# include "boost/config/platform/cray.hpp"
# include "boost/config/platform/vms.hpp"
# include <boost/config/detail/posix_features.hpp>
#endif

View File

@@ -1,121 +0,0 @@
// Boost compiler configuration selection header file
// (C) Copyright John Maddock 2001 - 2003.
// (C) Copyright Jens Maurer 2001 - 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// locate which std lib we are using and define BOOST_STDLIB_CONFIG as needed:
// First, check if __has_include is available and <version> include can be located,
// otherwise include <cstddef> to determine if some version of STLport is in use as the std lib
// (do not rely on this header being included since users can short-circuit this header
// if they know whose std lib they are using.)
#if defined(__cplusplus) && defined(__has_include)
# if __has_include(<version>)
// It should be safe to include `<version>` when it is present without checking
// the actual C++ language version as it consists solely of macro definitions.
// [version.syn] p1: The header <version> supplies implementation-dependent
// information about the C++ standard library (e.g., version number and release date).
# include <version>
# else
# include <cstddef>
# endif
#elif defined(__cplusplus)
# include <cstddef>
#else
# include <stddef.h>
#endif
#if defined(__SGI_STL_PORT) || defined(_STLPORT_VERSION)
// STLPort library; this _must_ come first, otherwise since
// STLport typically sits on top of some other library, we
// can end up detecting that first rather than STLport:
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/stlport.hpp"
#else
// If our std lib was not some version of STLport, and has not otherwise
// been detected, then include <utility> as it is about
// the smallest of the std lib headers that includes real C++ stuff.
// Some std libs do not include their C++-related macros in <cstddef>
// so this additional include makes sure we get those definitions.
// Note: do not rely on this header being included since users can short-circuit this
// #include if they know whose std lib they are using.
#if !defined(__LIBCOMO__) && !defined(__STD_RWCOMPILER_H__) && !defined(_RWSTD_VER)\
&& !defined(_LIBCPP_VERSION) && !defined(__GLIBCPP__) && !defined(__GLIBCXX__)\
&& !defined(__STL_CONFIG_H) && !defined(__MSL_CPP__) && !defined(__IBMCPP__)\
&& !defined(MSIPL_COMPILE_H) && !defined(_YVALS) && !defined(_CPPLIB_VER)
#include <utility>
#endif
#if defined(__LIBCOMO__)
// Comeau STL:
#define BOOST_STDLIB_CONFIG "boost/config/stdlib/libcomo.hpp"
#elif defined(__STD_RWCOMPILER_H__) || defined(_RWSTD_VER)
// Rogue Wave library:
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/roguewave.hpp"
#elif defined(_LIBCPP_VERSION)
// libc++
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/libcpp.hpp"
#elif defined(__GLIBCPP__) || defined(__GLIBCXX__)
// GNU libstdc++ 3
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/libstdcpp3.hpp"
#elif defined(__STL_CONFIG_H)
// generic SGI STL
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/sgi.hpp"
#elif defined(__MSL_CPP__)
// MSL standard lib:
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/msl.hpp"
#elif defined(__IBMCPP__) && defined(__COMPILER_VER__) && defined(__MVS__)
// IBM z/OS XL C/C++
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/xlcpp_zos.hpp"
#elif defined(__IBMCPP__)
// take the default VACPP std lib
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/vacpp.hpp"
#elif defined(MSIPL_COMPILE_H)
// Modena C++ standard library
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/modena.hpp"
#elif (defined(_YVALS) && !defined(__IBMCPP__)) || defined(_CPPLIB_VER)
// Dinkumware Library (this has to appear after any possible replacement libraries):
# define BOOST_STDLIB_CONFIG "boost/config/stdlib/dinkumware.hpp"
#elif defined (BOOST_ASSERT_CONFIG)
// this must come last - generate an error if we don't
// recognise the library:
# error "Unknown standard library - please configure and report the results to boost.org"
#endif
#endif
#if 0
//
// This section allows dependency scanners to find all the files we *might* include:
//
# include "boost/config/stdlib/stlport.hpp"
# include "boost/config/stdlib/libcomo.hpp"
# include "boost/config/stdlib/roguewave.hpp"
# include "boost/config/stdlib/libcpp.hpp"
# include "boost/config/stdlib/libstdcpp3.hpp"
# include "boost/config/stdlib/sgi.hpp"
# include "boost/config/stdlib/msl.hpp"
# include "boost/config/stdlib/xlcpp_zos.hpp"
# include "boost/config/stdlib/vacpp.hpp"
# include "boost/config/stdlib/modena.hpp"
# include "boost/config/stdlib/dinkumware.hpp"
#endif

File diff suppressed because it is too large Load Diff

View File

@@ -1,26 +0,0 @@
#ifndef BOOST_CONFIG_HEADER_DEPRECATED_HPP_INCLUDED
#define BOOST_CONFIG_HEADER_DEPRECATED_HPP_INCLUDED
// Copyright 2017 Peter Dimov.
//
// Distributed under the Boost Software License, Version 1.0.
//
// See accompanying file LICENSE_1_0.txt or copy at
// http://www.boost.org/LICENSE_1_0.txt
//
// BOOST_HEADER_DEPRECATED("<alternative>")
//
// Expands to the equivalent of
// BOOST_PRAGMA_MESSAGE("This header is deprecated. Use <alternative> instead.")
//
// Note that this header is C compatible.
#include <boost/config/pragma_message.hpp>
#if defined(BOOST_ALLOW_DEPRECATED_HEADERS)
# define BOOST_HEADER_DEPRECATED(a)
#else
# define BOOST_HEADER_DEPRECATED(a) BOOST_PRAGMA_MESSAGE("This header is deprecated. Use " a " instead.")
#endif
#endif // BOOST_CONFIG_HEADER_DEPRECATED_HPP_INCLUDED

View File

@@ -1,37 +0,0 @@
#ifndef BOOST_CONFIG_HELPER_MACROS_HPP_INCLUDED
#define BOOST_CONFIG_HELPER_MACROS_HPP_INCLUDED
// Copyright 2001 John Maddock.
// Copyright 2017 Peter Dimov.
//
// Distributed under the Boost Software License, Version 1.0.
//
// See accompanying file LICENSE_1_0.txt or copy at
// http://www.boost.org/LICENSE_1_0.txt
//
// BOOST_STRINGIZE(X)
// BOOST_JOIN(X, Y)
//
// Note that this header is C compatible.
//
// Helper macro BOOST_STRINGIZE:
// Converts the parameter X to a string after macro replacement
// on X has been performed.
//
#define BOOST_STRINGIZE(X) BOOST_DO_STRINGIZE(X)
#define BOOST_DO_STRINGIZE(X) #X
//
// Helper macro BOOST_JOIN:
// The following piece of macro magic joins the two
// arguments together, even when one of the arguments is
// itself a macro (see 16.3.1 in C++ standard). The key
// is that macro expansion of macro arguments does not
// occur in BOOST_DO_JOIN2 but does in BOOST_DO_JOIN.
//
#define BOOST_JOIN(X, Y) BOOST_DO_JOIN(X, Y)
#define BOOST_DO_JOIN(X, Y) BOOST_DO_JOIN2(X,Y)
#define BOOST_DO_JOIN2(X, Y) X##Y
#endif // BOOST_CONFIG_HELPER_MACROS_HPP_INCLUDED

View File

@@ -1,28 +0,0 @@
// (C) Copyright John Maddock 2008.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
//
// The aim of this header is just to include <cmath> but to do
// so in a way that does not result in recursive inclusion of
// the Boost TR1 components if boost/tr1/tr1/cmath is in the
// include search path. We have to do this to avoid circular
// dependencies:
//
#ifndef BOOST_CONFIG_CMATH
# define BOOST_CONFIG_CMATH
# ifndef BOOST_TR1_NO_RECURSION
# define BOOST_TR1_NO_RECURSION
# define BOOST_CONFIG_NO_CMATH_RECURSION
# endif
# include <cmath>
# ifdef BOOST_CONFIG_NO_CMATH_RECURSION
# undef BOOST_TR1_NO_RECURSION
# undef BOOST_CONFIG_NO_CMATH_RECURSION
# endif
#endif

View File

@@ -1,28 +0,0 @@
// (C) Copyright John Maddock 2005.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
//
// The aim of this header is just to include <complex> but to do
// so in a way that does not result in recursive inclusion of
// the Boost TR1 components if boost/tr1/tr1/complex is in the
// include search path. We have to do this to avoid circular
// dependencies:
//
#ifndef BOOST_CONFIG_COMPLEX
# define BOOST_CONFIG_COMPLEX
# ifndef BOOST_TR1_NO_RECURSION
# define BOOST_TR1_NO_RECURSION
# define BOOST_CONFIG_NO_COMPLEX_RECURSION
# endif
# include <complex>
# ifdef BOOST_CONFIG_NO_COMPLEX_RECURSION
# undef BOOST_TR1_NO_RECURSION
# undef BOOST_CONFIG_NO_COMPLEX_RECURSION
# endif
#endif

View File

@@ -1,28 +0,0 @@
// (C) Copyright John Maddock 2005.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
//
// The aim of this header is just to include <functional> but to do
// so in a way that does not result in recursive inclusion of
// the Boost TR1 components if boost/tr1/tr1/functional is in the
// include search path. We have to do this to avoid circular
// dependencies:
//
#ifndef BOOST_CONFIG_FUNCTIONAL
# define BOOST_CONFIG_FUNCTIONAL
# ifndef BOOST_TR1_NO_RECURSION
# define BOOST_TR1_NO_RECURSION
# define BOOST_CONFIG_NO_FUNCTIONAL_RECURSION
# endif
# include <functional>
# ifdef BOOST_CONFIG_NO_FUNCTIONAL_RECURSION
# undef BOOST_TR1_NO_RECURSION
# undef BOOST_CONFIG_NO_FUNCTIONAL_RECURSION
# endif
#endif

View File

@@ -1,28 +0,0 @@
// (C) Copyright John Maddock 2005.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
//
// The aim of this header is just to include <memory> but to do
// so in a way that does not result in recursive inclusion of
// the Boost TR1 components if boost/tr1/tr1/memory is in the
// include search path. We have to do this to avoid circular
// dependencies:
//
#ifndef BOOST_CONFIG_MEMORY
# define BOOST_CONFIG_MEMORY
# ifndef BOOST_TR1_NO_RECURSION
# define BOOST_TR1_NO_RECURSION
# define BOOST_CONFIG_NO_MEMORY_RECURSION
# endif
# include <memory>
# ifdef BOOST_CONFIG_NO_MEMORY_RECURSION
# undef BOOST_TR1_NO_RECURSION
# undef BOOST_CONFIG_NO_MEMORY_RECURSION
# endif
#endif

View File

@@ -1,28 +0,0 @@
// (C) Copyright John Maddock 2005.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
//
// The aim of this header is just to include <utility> but to do
// so in a way that does not result in recursive inclusion of
// the Boost TR1 components if boost/tr1/tr1/utility is in the
// include search path. We have to do this to avoid circular
// dependencies:
//
#ifndef BOOST_CONFIG_UTILITY
# define BOOST_CONFIG_UTILITY
# ifndef BOOST_TR1_NO_RECURSION
# define BOOST_TR1_NO_RECURSION
# define BOOST_CONFIG_NO_UTILITY_RECURSION
# endif
# include <utility>
# ifdef BOOST_CONFIG_NO_UTILITY_RECURSION
# undef BOOST_TR1_NO_RECURSION
# undef BOOST_CONFIG_NO_UTILITY_RECURSION
# endif
#endif

View File

@@ -1,33 +0,0 @@
// (C) Copyright John Maddock 2001 - 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
// IBM/Aix specific config options:
#define BOOST_PLATFORM "IBM Aix"
#define BOOST_HAS_UNISTD_H
#define BOOST_HAS_NL_TYPES_H
#define BOOST_HAS_NANOSLEEP
#define BOOST_HAS_CLOCK_GETTIME
// This needs support in "boost/cstdint.hpp" exactly like FreeBSD.
// This platform has header named <inttypes.h> which includes all
// the things needed.
#define BOOST_HAS_STDINT_H
// Threading API's:
#define BOOST_HAS_PTHREADS
#define BOOST_HAS_PTHREAD_DELAY_NP
#define BOOST_HAS_SCHED_YIELD
//#define BOOST_HAS_PTHREAD_YIELD
// boilerplate code:
#include <boost/config/detail/posix_features.hpp>

View File

@@ -1,15 +0,0 @@
// (C) Copyright John Maddock 2002.
// Use, modification and distribution are subject to the
// Boost Software License, Version 1.0. (See accompanying file
// LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
// See http://www.boost.org for most recent version.
#define BOOST_PLATFORM "AmigaOS"
#define BOOST_DISABLE_THREADS
#define BOOST_NO_CWCHAR
#define BOOST_NO_STD_WSTRING
#define BOOST_NO_INTRINSIC_WCHAR_T

Some files were not shown because too many files have changed in this diff Show More