PRE-MERGE #18639 Introduce PowerShell installer stub

This fixes two issues in the WPF terminal control:
- The emoji picker and other IME candidate windows didn't show up in the
right place
- Submitting an emoji via the emoji picker would result in two win32
input mode events with a VK of 65535 and the surrogate pair halves.

I am not sure I did the right thing with the thread TSF handle...

.config/configuration.vsEnterprise.winget

@@ -0,0 +1,43 @@
+# yaml-language-server: $schema=https://aka.ms/configuration-dsc-schema/0.2
+# Reference: https://github.com/microsoft/terminal/blob/main/README.md#developer-guidance
+properties:
+  resources:
+    - resource: Microsoft.Windows.Developer/DeveloperMode
+      directives:
+        description: Enable Developer Mode
+        allowPrerelease: true
+        # Requires elevation for the set operation
+        securityContext: elevated
+      settings:
+        Ensure: Present
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: powershell
+      directives:
+        description: Install PowerShell 7
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.PowerShell
+        source: winget
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: vsPackage
+      directives:
+        description: Install Visual Studio 2022 Enterprise (any edition is OK)
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.VisualStudio.2022.Enterprise
+        source: winget
+    - resource: Microsoft.VisualStudio.DSC/VSComponents
+      dependsOn:
+        - vsPackage
+      directives:
+        description: Install required VS workloads from project .vsconfig file
+        allowPrerelease: true
+        # Requires elevation for the get and set operations
+        securityContext: elevated
+      settings:
+        productId: Microsoft.VisualStudio.Product.Enterprise
+        channelId: VisualStudio.17.Release
+        vsConfigFile: '${WinGetConfigRoot}\..\.vsconfig'
+  configurationVersion: 0.2.0

.config/configuration.vsProfessional.winget

@@ -0,0 +1,43 @@
+# yaml-language-server: $schema=https://aka.ms/configuration-dsc-schema/0.2
+# Reference: https://github.com/microsoft/terminal/blob/main/README.md#developer-guidance
+properties:
+  resources:
+    - resource: Microsoft.Windows.Developer/DeveloperMode
+      directives:
+        description: Enable Developer Mode
+        allowPrerelease: true
+        # Requires elevation for the set operation
+        securityContext: elevated
+      settings:
+        Ensure: Present
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: powershell
+      directives:
+        description: Install PowerShell 7
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.PowerShell
+        source: winget
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: vsPackage
+      directives:
+        description: Install Visual Studio 2022 Professional (any edition is OK)
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.VisualStudio.2022.Professional
+        source: winget
+    - resource: Microsoft.VisualStudio.DSC/VSComponents
+      dependsOn:
+        - vsPackage
+      directives:
+        description: Install required VS workloads from project .vsconfig file
+        allowPrerelease: true
+        # Requires elevation for the get and set operations
+        securityContext: elevated
+      settings:
+        productId: Microsoft.VisualStudio.Product.Professional
+        channelId: VisualStudio.17.Release
+        vsConfigFile: '${WinGetConfigRoot}\..\.vsconfig'
+  configurationVersion: 0.2.0

.config/configuration.winget

@@ -0,0 +1,43 @@
+# yaml-language-server: $schema=https://aka.ms/configuration-dsc-schema/0.2
+# Reference: https://github.com/microsoft/terminal/blob/main/README.md#developer-guidance
+properties:
+  resources:
+    - resource: Microsoft.Windows.Developer/DeveloperMode
+      directives:
+        description: Enable Developer Mode
+        allowPrerelease: true
+        # Requires elevation for the set operation
+        securityContext: elevated
+      settings:
+        Ensure: Present
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: powershell
+      directives:
+        description: Install PowerShell 7
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.PowerShell
+        source: winget
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: vsPackage
+      directives:
+        description: Install Visual Studio 2022 Community (any edition is OK)
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.VisualStudio.2022.Community
+        source: winget
+    - resource: Microsoft.VisualStudio.DSC/VSComponents
+      dependsOn:
+        - vsPackage
+      directives:
+        description: Install required VS workloads from project .vsconfig file
+        allowPrerelease: true
+        # Requires elevation for the get and set operations
+        securityContext: elevated
+      settings:
+        productId: Microsoft.VisualStudio.Product.Community
+        channelId: VisualStudio.17.Release
+        vsConfigFile: '${WinGetConfigRoot}\..\.vsconfig'
+  configurationVersion: 0.2.0

.github/actions/spelling/allow/allow.txt

@@ -11,11 +11,13 @@ colorbrewer
 commandlines
 consvc
 copyable
+CText
 dalet
 dcs
 deselection
 dialytika
 diffing
+Dimidium
 dje
 downsides
 dze

.github/actions/spelling/allow/apis.txt

@@ -222,6 +222,7 @@ Stubless
 Subheader
 Subpage
 syscall
+syscolors
 SYSTEMBACKDROP
 TABROW
 TASKBARCREATED

.github/actions/spelling/expect/expect.txt

@@ -86,6 +86,7 @@ autoscrolling
 Autowrap
 AVerify
 awch
+AZCOPY
 azurecr
 AZZ
 backgrounded
@@ -215,6 +216,7 @@ codepages
 codepath
 coinit
 colorizing
+COLORONCOLOR
 COLORREFs
 colorschemes
 colorspec
@@ -1415,6 +1417,7 @@ propvar
 propvariant
 propvarutil
 psa
+PSCRED
 PSECURITY
 pseudoconsole
 pseudoterminal
@@ -1676,6 +1679,7 @@ SMARTQUOTE
 SMTO
 snapcx
 snapcy
+snk
 SOLIDBOX
 Solutiondir
 somefile
@@ -1944,6 +1948,7 @@ VPACKMANIFESTDIRECTORY
 VPR
 VREDRAW
 vsc
+vsconfig
 vscprintf
 VSCROLL
 vsdevshell

.github/policies/resourceManagement.yml

@@ -8,7 +8,7 @@ where:
 configuration:
   resourceManagementConfiguration:
     scheduledSearches:
-    - description: 
+    - description: '"Needs-Author-Feedback" and "No-Recent-Activity" issues are closed after 3 days of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -23,7 +23,7 @@ configuration:
           days: 3
       actions:
       - closeIssue
-    - description: 
+    - description: '"Needs-Author-Feedback" issues are labelled "No-Recent-Activity" after 4 days of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -41,7 +41,7 @@ configuration:
           label: No-Recent-Activity
       - addReply:
           reply: This issue has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **4 days**. It will be closed if no further activity occurs **within 3 days of this comment**.
-    - description: 
+    - description: '"Resolution-Duplicate" issues are closed after 1 day of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -56,7 +56,7 @@ configuration:
       - addReply:
           reply: This issue has been marked as duplicate and has not had any activity for **1 day**. It will be closed for housekeeping purposes.
       - closeIssue
-    - description: 
+    - description: '"Needs-Author-Feedback" and "No-Recent-Activity" PRs are closed after 7 days of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -71,7 +71,7 @@ configuration:
           days: 7
       actions:
       - closeIssue
-    - description: 
+    - description: Add "No-Recent-Activity" label to PRs with "Needs-Author-Feedback" label after 7 days of inactivity
       frequencies:
       - hourly:
           hour: 3
@@ -90,7 +90,8 @@ configuration:
       - addReply:
           reply: This pull request has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **7 days**. It will be closed if no further activity occurs **within 7 days of this comment**.
     eventResponderTasks:
-    - if:
+    - description: Add "Needs-Triage" to new issues
+      if:
       - payloadType: Issues
       - or:
         - and:
@@ -102,8 +103,8 @@ configuration:
       then:
       - addLabel:
           label: Needs-Triage
-      description: 
-    - if:
+    - description: Replace "Needs-Author-Feedback" with "Needs-Attention" when author comments
+      if:
       - payloadType: Issue_Comment
       - isAction:
           action: Created
@@ -116,8 +117,8 @@ configuration:
           label: Needs-Attention
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when closing an issue
+      if:
       - payloadType: Issues
       - not:
           isAction:
@@ -127,16 +128,16 @@ configuration:
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when someone comments on an issue
+      if:
       - payloadType: Issue_Comment
       - hasLabel:
           label: No-Recent-Activity
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Add "Needs-Author-Feedback" when changes are requested on a PR
+      if:
       - payloadType: Pull_Request_Review
       - isAction:
           action: Submitted
@@ -145,8 +146,8 @@ configuration:
       then:
       - addLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "Needs-Author-Feedback" when author performs activity on their PR
+      if:
       - payloadType: Pull_Request
       - isActivitySender:
           issueAuthor: True
@@ -158,8 +159,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "Needs-Author-Feedback" when author comments on their issue
+      if:
       - payloadType: Issue_Comment
       - isActivitySender:
           issueAuthor: True
@@ -168,8 +169,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "Needs-Author-Feedback" when the author reviews the PR
+      if:
       - payloadType: Pull_Request_Review
       - isActivitySender:
           issueAuthor: True
@@ -178,8 +179,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity"" when activity occurs on the PR (aside from closing it)
+      if:
       - payloadType: Pull_Request
       - not:
           isAction:
@@ -189,39 +190,39 @@ configuration:
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when someone comments on the PR
+      if:
       - payloadType: Issue_Comment
       - hasLabel:
           label: No-Recent-Activity
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when someone reviews the PR
+      if:
       - payloadType: Pull_Request_Review
       - hasLabel:
           label: No-Recent-Activity
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Enable auto-merge on PRs with the "AutoMerge" label
+      if:
       - payloadType: Pull_Request
       - hasLabel:
           label: AutoMerge
       then:
       - enableAutoMerge:
           mergeMethod: Squash
-      description: 
-    - if:
+    - description: Disable auto-merge on PRs when the "AutoMerge" label is removed
+      if:
       - payloadType: Pull_Request
       - labelRemoved:
           label: AutoMerge
       then:
       - disableAutoMerge
-      description: 
-    - if:
+    - description: Add "Needs-Tag-Fix" label to issues without an Area, Issue, or Product label
+      if:
       - payloadType: Issues
       - or:
         - and:
@@ -238,15 +239,45 @@ configuration:
           - not:
               hasLabel:
                 label: Area-Accessibility
+          - not:
+              hasLabel:
+                label: Area-AtlasEngine
+          - not:
+              hasLabel:
+                label: Area-AzureShell
           - not:
               hasLabel:
                 label: Area-Build
+          - not:
+              hasLabel:
+                label: Area-Chat
+          - not:
+              hasLabel:
+                label: Area-CmdPal
+          - not:
+              hasLabel:
+                label: Area-CodeHealth
+          - not:
+              hasLabel:
+                label: Area-Commandline
+          - not:
+              hasLabel:
+                label: Area-CookedRead
+          - not:
+              hasLabel:
+                label: Area-DefApp
           - not:
               hasLabel:
                 label: Area-Extensibility
           - not:
               hasLabel:
                 label: Area-Fonts
+          - not:
+              hasLabel:
+                label: Area-GroupPolicy
+          - not:
+              hasLabel:
+                label: Area-i18n
           - not:
               hasLabel:
                 label: Area-Input
@@ -256,21 +287,45 @@ configuration:
           - not:
               hasLabel:
                 label: Area-Interop
+          - not:
+              hasLabel:
+                label: Area-Localization
           - not:
               hasLabel:
                 label: Area-Output
           - not:
               hasLabel:
                 label: Area-Performance
+          - not:
+              hasLabel:
+                label: Area-Portable
+          - not:
+              hasLabel:
+                label: Area-Quality
+          - not:
+              hasLabel:
+                label: Area-Remoting
           - not:
               hasLabel:
                 label: Area-Rendering
+          - not:
+              hasLabel:
+                label: Area-Schema
           - not:
               hasLabel:
                 label: Area-Server
           - not:
               hasLabel:
                 label: Area-Settings
+          - not:
+              hasLabel:
+                label: Area-SettingsUI
+          - not:
+              hasLabel:
+                label: Area-ShellExtension
+          - not:
+              hasLabel:
+                label: Area-Suggestions
           - not:
               hasLabel:
                 label: Area-TerminalConnection
@@ -279,49 +334,19 @@ configuration:
                 label: Area-TerminalControl
           - not:
               hasLabel:
-                label: Area-User Interface
+                label: Area-Theming
+          - not:
+              hasLabel:
+                label: Area-UserInterface
           - not:
               hasLabel:
                 label: Area-VT
-          - not:
-              hasLabel:
-                label: Area-CodeHealth
-          - not:
-              hasLabel:
-                label: Area-Quality
-          - not:
-              hasLabel:
-                label: Area-AzureShell
-          - not:
-              hasLabel:
-                label: Area-Schema
-          - not:
-              hasLabel:
-                label: Area-Commandline
-          - not:
-              hasLabel:
-                label: Area-ShellExtension
-          - not:
-              hasLabel:
-                label: Area-WPFControl
-          - not:
-              hasLabel:
-                label: Area-Settings UI
-          - not:
-              hasLabel:
-                label: Area-DefApp
-          - not:
-              hasLabel:
-                label: Area-Remoting
           - not:
               hasLabel:
                 label: Area-Windowing
           - not:
               hasLabel:
-                label: Area-Theming
-          - not:
-              hasLabel:
-                label: Area-Localization
+                label: Area-WPFControl
         - and:
           - not:
               hasLabel:
@@ -408,8 +433,8 @@ configuration:
       then:
       - addLabel:
           label: Needs-Tag-Fix
-      description: 
-    - if:
+    - description: Remove "Needs-Tag-Fix" label when an issue is tagged with an Area, Issue, and Product label
+      if:
       - payloadType: Issues
       - and:
         - isLabeled
@@ -417,66 +442,117 @@ configuration:
             label: Needs-Tag-Fix
       - and:
         - or:
-          - hasLabel:
-              label: Area-Accessibility
-          - hasLabel:
-              label: Area-Build
-          - hasLabel:
-              label: Area-Extensibility
-          - hasLabel:
-              label: Area-Fonts
-          - hasLabel:
-              label: Area-Input
-          - hasLabel:
-              label: Area-Interaction
-          - hasLabel:
-              label: Area-Interop
-          - hasLabel:
-              label: Area-Output
-          - hasLabel:
-              label: Area-Performance
-          - hasLabel:
-              label: Area-Rendering
-          - hasLabel:
-              label: Area-Server
-          - hasLabel:
-              label: Area-Settings
-          - hasLabel:
-              label: Area-TerminalConnection
-          - hasLabel:
-              label: Area-TerminalControl
-          - hasLabel:
-              label: Area-User Interface
-          - hasLabel:
-              label: Area-VT
-          - hasLabel:
-              label: Area-CodeHealth
-          - hasLabel:
-              label: Area-Quality
-          - hasLabel:
-              label: Area-Schema
-          - hasLabel:
-              label: Area-AzureShell
-          - hasLabel:
-              label: Area-Commandline
-          - hasLabel:
-              label: Area-ShellExtension
-          - hasLabel:
-              label: Area-WPFControl
-          - hasLabel:
-              label: Area-Settings UI
-          - hasLabel:
-              label: Area-DefApp
-          - hasLabel:
-              label: Area-Localization
-          - hasLabel:
-              label: Area-Windowing
-          - hasLabel:
-              label: Area-Theming
-          - hasLabel:
-              label: Area-AtlasEngine
-          - hasLabel:
-              label: Area-CmdPal
+          - not:
+              hasLabel:
+                label: Area-Accessibility
+          - not:
+              hasLabel:
+                label: Area-AtlasEngine
+          - not:
+              hasLabel:
+                label: Area-AzureShell
+          - not:
+              hasLabel:
+                label: Area-Build
+          - not:
+              hasLabel:
+                label: Area-Chat
+          - not:
+              hasLabel:
+                label: Area-CmdPal
+          - not:
+              hasLabel:
+                label: Area-CodeHealth
+          - not:
+              hasLabel:
+                label: Area-Commandline
+          - not:
+              hasLabel:
+                label: Area-CookedRead
+          - not:
+              hasLabel:
+                label: Area-DefApp
+          - not:
+              hasLabel:
+                label: Area-Extensibility
+          - not:
+              hasLabel:
+                label: Area-Fonts
+          - not:
+              hasLabel:
+                label: Area-GroupPolicy
+          - not:
+              hasLabel:
+                label: Area-i18n
+          - not:
+              hasLabel:
+                label: Area-Input
+          - not:
+              hasLabel:
+                label: Area-Interaction
+          - not:
+              hasLabel:
+                label: Area-Interop
+          - not:
+              hasLabel:
+                label: Area-Localization
+          - not:
+              hasLabel:
+                label: Area-Output
+          - not:
+              hasLabel:
+                label: Area-Performance
+          - not:
+              hasLabel:
+                label: Area-Portable
+          - not:
+              hasLabel:
+                label: Area-Quality
+          - not:
+              hasLabel:
+                label: Area-Remoting
+          - not:
+              hasLabel:
+                label: Area-Rendering
+          - not:
+              hasLabel:
+                label: Area-Schema
+          - not:
+              hasLabel:
+                label: Area-Server
+          - not:
+              hasLabel:
+                label: Area-Settings
+          - not:
+              hasLabel:
+                label: Area-SettingsUI
+          - not:
+              hasLabel:
+                label: Area-ShellExtension
+          - not:
+              hasLabel:
+                label: Area-Suggestions
+          - not:
+              hasLabel:
+                label: Area-TerminalConnection
+          - not:
+              hasLabel:
+                label: Area-TerminalControl
+          - not:
+              hasLabel:
+                label: Area-Theming
+          - not:
+              hasLabel:
+                label: Area-UserInterface
+          - not:
+              hasLabel:
+                label: Area-VT
+          - not:
+              hasLabel:
+                label: Area-Windowing
+          - not:
+              hasLabel:
+                label: Area-WPFControl
         - or:
           - hasLabel:
               label: Issue-Bug
@@ -533,14 +609,14 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Tag-Fix
-      description: 
-    - if:
+    - description: Add "In-PR" label to issues that are referenced in a PR
+      if:
       - payloadType: Pull_Request
       then:
       - inPrLabel:
           label: In-PR
-      description: 
-    - if:
+    - description: Remove "Needs-Tag-Fix" label when an issue also has the "Resolution-Duplicate" label
+      if:
       - payloadType: Issues
       - hasLabel:
           label: Needs-Tag-Fix
@@ -549,8 +625,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Tag-Fix
-      description: 
-    - if:
+    - description: Close issues that are opened and have the template title
+      if:
       - payloadType: Issues
       - or:
         - titleContains:
@@ -576,8 +652,8 @@ configuration:
           label: Needs-Author-Feedback
       - addReply:
           reply: Hi! Thanks for attempting to open an issue. Unfortunately, your title wasn't changed from the original template which makes it very hard for us to track and triage. You are welcome to fix up the title and try again with a new issue.
-      description: 
-    - if:
+    - description: Close issues that are opened and have no body
+      if:
       - payloadType: Issues
       - or:
         - isAction:
@@ -595,8 +671,8 @@ configuration:
           label: Needs-Author-Feedback
       - addReply:
           reply: "Hi! Thanks for attempting to open an issue. Unfortunately, you didn't write anything in the body which makes it impossible to understand your concern. You are welcome to fix up the issue and try again by opening another issue with the body filled out. "
-      description: 
-    - if:
+    - description: Request a review from the team when a PR is labeled "Needs-Second"
+      if:
       - payloadType: Pull_Request
       - isLabeled
       - hasLabel:
@@ -613,8 +689,8 @@ configuration:
           reviewer: dhowett
       - requestReview:
           reviewer: lhecker
-      description: 
-    - if:
+    - description: Remove "Needs-Second" label when a PR is reviewed
+      if:
       - payloadType: Pull_Request_Review
       - not: isOpen
       - hasLabel:
@@ -622,8 +698,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Second
-      description: 
-    - if:
+    - description: Remove "Help-Wanted" label from issues that are in a PR
+      if:
       - payloadType: Issues
       - hasLabel:
           label: In-PR
@@ -633,8 +709,8 @@ configuration:
       then:
       - removeLabel:
           label: Help-Wanted
-      description: 
-    - if:
+    - description: Comments with "/dup", "/dupe", or "/duplicate" will close the issue as a duplicate and remove "Needs-" labels
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: '\/dup(licate|e)?(\s+of)?\s+\#[\d]+'
@@ -662,8 +738,8 @@ configuration:
           label: Needs-Repro
       - removeLabel:
           label: Needs-Second
-      description: 
-    - if:
+    - description: Comments with "/feedback" will direct people to Feedback Hub
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: '\/feedback'
@@ -680,13 +756,13 @@ configuration:
             Hi there!<br><br>Can you please send us feedback with the [Feedback Hub](https://support.microsoft.com/en-us/windows/send-feedback-to-microsoft-with-the-feedback-hub-app-f59187f8-8739-22d6-ba93-f66612949332) with this issue? Make sure to click the "Start recording" button, then reproduce the issue before submitting the feedback. Once it's submitted, paste the link here so we can more easily find your crash information on the back end?<br><br>Thanks!<br><br>![image](https://user-images.githubusercontent.com/18356694/140811502-a068f78b-89d2-4587-925a-73e19652b830.png)<br><br>![image](https://user-images.githubusercontent.com/18356694/140811557-cdc22a0f-fa6a-4f6a-953e-73b51f5548a3.png)<br><br>![image](https://user-images.githubusercontent.com/18221333/62478649-6de55400-b760-11e9-806e-5aab7e085a9f.png)
       - addLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Comments clean the email reply
+      if:
       - payloadType: Issue_Comment
       then:
       - cleanEmailReply
-      description: 
-    - if:
+    - description: Sync labels when a PR event occurs
+      if:
       - payloadType: Pull_Request
       then:
       - labelSync:
@@ -701,8 +777,8 @@ configuration:
           pattern: Severity-
       - labelSync:
           pattern: Impact-
-      description: 
-    - if:
+    - description: Comments with "/dup", "/dupe", or "/duplicate" targeting another repo will close the issue as a duplicate and remove "Needs-" labels
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: '\/dup(licate|e)?(\s+of)?\s+https'
@@ -730,8 +806,8 @@ configuration:
           label: Needs-Repro
       - removeLabel:
           label: Needs-Second
-      description: 
-    - if:
+    - description: Comments with "/?" will replace the "Needs-Attention" label with "Needs-Author-Feedback"
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: /?
@@ -746,6 +822,5 @@ configuration:
           label: Needs-Attention
       - addLabel:
           label: Needs-Author-Feedback
-      description: 
 onFailure: 
 onSuccess: 

README.md

@@ -340,6 +340,19 @@ If you would like to ask a question that you feel doesn't warrant an issue
 
 ## Prerequisites
 
+You can configure your environment to build Terminal in one of two ways:
+
+### Using WinGet configuration file
+
+After cloning the repository, you can use a [WinGet configuration file](https://learn.microsoft.com/en-us/windows/package-manager/configuration/#use-a-winget-configuration-file-to-configure-your-machine)
+to set up your environment. The [default configuration file](.config/configuration.winget) installs Visual Studio 2022 Community & rest of the required tools. There are two other variants of the configuration file available in the [.config](.config) directory for Enterprise & Professional editions of Visual Studio 2022. To run the default configuration file, you can either double-click the file from explorer or run the following command:
+
+```powershell
+winget configure .config\configuration.winget
+```
+
+### Manual configuration
+
 * You must be running Windows 10 2004 (build >= 10.0.19041.0) or later to run
   Windows Terminal
 * You must [enable Developer Mode in the Windows Settings

build/StoreSubmission/Preview/PDPs/de-DE/PDP.xml

@@ -56,15 +56,11 @@ Dies ist ein Open Source-Projekt, und wir freuen uns über die Teilnahme der Com
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-– Wir haben umgeschrieben, wie Konsolenanwendungen im Terminal gehostet werden! Melden Sie alle auftretenden Fehler.
-- Terminal unterstützt jetzt Sixels!
-- Sie können jetzt ein angedocktes Fenster öffnen, das Ausschnitte von Befehlen enthält, die Sie gespeichert haben, um sie später zu verwenden.
-- Für Benutzer der Eingabeaufforderung der neuesten Version von Windows 11 wird möglicherweise ein „Kurzer Tipp“-Symbol angezeigt, das installierbare Software von WinGet
- vorschlägt
-- Ausgewählter Text wird jetzt viel sichtbarer (und anpassbarer!)
-- Eine Reihe von Zuverlässigkeitsfehlern, Komfortproblemen und Ärgernissen wurden behoben.
+- Wir haben der Benutzeroberfläche durchschnittliche Einstellungen hinzugefügt, die nur einmal in der JSON-Datei vorhanden waren, einschließlich einer neuen Seite zum Anpassen des Layouts Ihres Menüs "Neue Registerkarte"!
+- Wir haben die Fensterverwaltung zurückgesetzt, um die Zuverlässigkeit zu verbessern; Melden Sie alle Fehler, die mit dem alias "wt.exe" auftreten.
+- Profile zeigen jetzt ein Symbol an, wenn sie ausgeblendet wurden oder auf programme verweisen, die deinstalliert wurden.
 
-Weitere Informationen finden Sie auf unserer GitHub-Releaseseite.
+Weitere Details finden Sie auf unserer GitHub-Releasesseite.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/en-US/PDP.xml

@@ -54,14 +54,11 @@ This is an open source project and we welcome community participation. To partic
     <!-- _locComment_text="{MaxLength=255} App DevStudio" -->
   </DevStudio>
   <ReleaseNotes _locID="App_ReleaseNotes">
-    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__} App Release Note" -->Version __VERSION_NUMBER__
+    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__}{Locked=wt.exe} App Release Note" -->Version __VERSION_NUMBER__
 
-- We've rewritten how console applications are hosted inside Terminal! Please report any bugs you encounter.
-- Terminal now supports Sixels!
-- You can now open a docked panel containing snippets of commands you have saved to use later
-- Command Prompt users on the latest Windows 11 release may see a "quick tip" icon that suggests installable software from WinGet
-- Selected text will now be much more visible (and customizable!)
-- A number of reliabilty bugs, convenience issues and annoyances have been fixed.
+- We've added dozens of settings to the UI that once only existed in the JSON file, including a new page for customizing the layout of your New Tab menu!
+- We have rearchitected window management to improve reliability; please file any bugs you encounter with the wt.exe alias
+- Profiles now show an icon if they've been hidden or refer to programs which were uninstalled.
 
 Please see our GitHub releases page for additional details.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/es-ES/PDP.xml

@@ -56,14 +56,11 @@ Este es un proyecto de fuente abierta y animamos a la comunidad a participar. Pa
   <ReleaseNotes>
     Versión __VERSION_NUMBER__
 
-- Hemos reescrito cómo se hospedan las aplicaciones de consola en Terminal. Informe de los errores que encuentre.
-- Terminal ahora admite sixeles.
-- Ahora puede abrir un panel acoplado que contenga fragmentos de comandos que haya guardado para usarlos más adelante
-- Los usuarios del símbolo del sistema de la versión más reciente de Windows 11 pueden ver un icono de "sugerencia rápida" que sugiere software instalable de WinGet
-- El texto seleccionado ahora será mucho más visible (y personalizable)
-- Se han corregido varios errores de fiabilidad, problemas de comodidad y molestias.
+- Hemos agregado decenas de configuraciones a la interfaz de usuario que solo existían una vez en el archivo JSON, incluida una página nueva para personalizar el diseño del menú Nueva pestaña.
+- Tenemos administración de ventanas rearchitecdas para mejorar la confiabilidad; envíe los errores que encuentre con el alias de wt.exe.
+- Ahora, los perfiles muestran un icono si se han ocultado o hacen referencia a programas que se han desinstalado.
 
-Consulte la página de versiones de GitHub para más información.
+Consulte nuestra página de versiones de GitHub para obtener más detalles.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/fr-FR/PDP.xml

@@ -54,16 +54,13 @@ Il s’agit d’un projet open source et nous vous invitons à participer dans l
     
   </DevStudio>
   <ReleaseNotes>
-    Version __VERSION_NUMBER__
+    __VERSION_NUMBER__ de version
 
-- Nous avons réécrit la manière dont les applications de console sont hébergées dans Terminal ! Veuillez signaler tout bug que vous rencontrez.
-- Le terminal prend désormais en charge Sixels !
-- Vous pouvez désormais ouvrir un panneau ancré contenant des extraits de commandes que vous avez enregistrées pour les utiliser ultérieurement
-- Les utilisateurs de l'invite de commande sur la dernière version de Windows 11 peuvent voir une icône « astuce rapide » qui suggère un logiciel installable à partir de WinGet
-- Le texte sélectionné sera désormais beaucoup plus visible (et personnalisable !)
-- Un certain nombre de bugs de fiabilité, de problèmes de commodité et de désagréments ont été corrigés.
+- Nous avons ajouté des milliers de paramètres à l’interface utilisateur qui n’existaient auparavant que dans le fichier JSON, y compris une nouvelle page pour personnaliser la disposition de votre menu Nouvel onglet !
+- Nous avons réarchitialiser la gestion des fenêtres pour améliorer la fiabilité ; entrez les bogues rencontrés avec l’alias wt.exe
+- Les profils affichent désormais une icône s’ils ont été masqués ou s’ils font référence à des programmes qui ont été désinstallés.
 
-Veuillez consulter notre page de versions GitHub pour plus de détails.
+Pour plus d’informations, consultez notre page des mises en production GitHub.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/it-IT/PDP.xml

@@ -54,16 +54,13 @@ Si tratta di un progetto open source e la partecipazione della community è molt
     
   </DevStudio>
   <ReleaseNotes>
-    Versione __VERSION_NUMBER__ 
+    Versione __VERSION_NUMBER__
 
-- È stato riscritto il modo in cui le applicazioni della console vengono ospitate all'interno di Terminale. Segnala eventuali bug riscontrati.
-- Terminal supporta ora Sixel.
-- È ora possibile aprire un pannello ancorato contenente frammenti di comandi salvati per usarli in seguito
-- Gli utenti del prompt dei comandi nella versione più recente di Windows 11 potrebbero visualizzare un'icona di "suggerimento rapido" che consiglia il software installabile da WinGet
-- Il testo selezionato sarà ora molto più visibile, oltre che personalizzabile.
-- Sono stati risolti diversi bug di affidabilità, problemi di praticità e fastidi.
+- Sono state aggiunte decine di impostazioni all'interfaccia utente che una volta esisteva solo nel file JSON, inclusa una nuova pagina per personalizzare il layout del menu Nuova scheda.
+- È stata riattivata la gestione delle finestre per migliorare l'affidabilità; inserire eventuali bug riscontrati con l'alias wt.exe
+- I profili ora mostrano un'icona se sono stati nascosti o fanno riferimento ai programmi che sono stati disinstallati.
 
-Per altri dettagli, vedi la pagina delle versioni di GitHub.
+Per altri dettagli, vedere la pagina delle versioni di GitHub.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ja-JP/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     バージョン __VERSION_NUMBER__
 
-- ターミナル内でのコンソール アプリケーションのホスト方法を書き換えました。発生したバグを報告してください。
-- ターミナルで Sixels がサポートされるようになりました。
-- 後で使用するために保存したコマンドのスニペットを含むドッキング パネルを開けるようになりました
-- 最新の Windows 11 リリースのコマンド プロンプト ユーザーには、WinGet からインストール可能なソフトウェアを提案する "クイック ヒント" アイコンが表示される場合があります
-- 選択したテキストが大幅に見やすくなりました (カスタマイズも可能です)
-- 信頼性に関するバグ、利便性の問題、不快な問題の多くが修正されました。
+- [新しいタブ] メニューのレイアウトをカスタマイズするための新しいページを含む、一度だけ JSON ファイルに存在した UI に多数の設定を追加しました。
+- 信頼性を向上させるためにウィンドウ管理を再選択しました。wt.exe エイリアスで発生したバグを報告してください
+- プロファイルが非表示になっているか、アンインストールされたプログラムを参照している場合にアイコンが表示されるようになりました。
 
-詳細については、GitHub リリース ページをご覧ください。
+詳細については、GitHub リリース ページを参照してください。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ko-KR/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     버전 __VERSION_NUMBER__
 
-- 콘솔 애플리케이션이 터미널 내에서 호스팅되는 방법을 다시 작성했습니다! 발생한 버그를 보고하세요.
-- 터미널에서 이제 Sixels를 지원합니다!
-- 이제 나중에 사용하기 위해 저장한 명령 조각이 포함된 도킹된 패널을 열 수 있습니다.
-- 최신 Windows 11 릴리스의 명령 프롬프트 사용자는 WinGet에서 설치 가능한 소프트웨어를 제안하는 "빠른 팁" 아이콘을 볼 수 있습니다.
-- 이제 선택한 텍스트가 훨씬 더 잘 표시됩니다(사용자 지정도 가능!).
-- 여러 신뢰성 버그, 편의 문제 및 성가신 사항이 수정되었습니다.
+- 새 탭 메뉴의 레이아웃을 사용자 지정하기 위한 새 페이지를 포함하여 JSON 파일에 한 번만 존재했던 UI에 수천 개의 설정을 추가했습니다.
+- 안정성을 개선하기 위해 창 관리를 다시 보관했습니다. wt.exe 별칭에 발생한 버그를 제출하세요.
+- 프로필이 숨겨졌거나 제거된 프로그램을 참조하는 경우 이제 프로필에 아이콘이 표시됩니다.
 
 자세한 내용은 GitHub 릴리스 페이지를 참조하세요.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/pt-BR/PDP.xml

@@ -56,14 +56,11 @@ Este é um projeto de código aberto e a participação da comunidade é bem-vin
   <ReleaseNotes>
     Versão __VERSION_NUMBER__
 
-- Reescrevemos a forma como os aplicativos de console são hospedados no Terminal! Certifique-se de reportar os bugs que você encontrar.
-- O terminal agora é compatível com o Sixels!
-- Agora você pode abrir um painel acoplado contendo snippets de comandos que você salvou para usar mais tarde
-- Os usuários do Prompt de Comando na versão mais recente do Windows 11 podem ver um ícone de "dica rápida", que sugere softwares instaláveis a partir do WinGet
-- O texto selecionado agora ficará muito mais visível (e personalizável!)
-- Vários bugs de confiabilidade, problemas de conveniência e incômodos foram resolvidos.
+- Adicionamos várias configurações à interface do usuário que só existiam no arquivo JSON, incluindo uma nova página para personalizar o layout do menu Nova Guia!
+- Temos o gerenciamento de janelas rearmado para melhorar a confiabilidade; registre todos os bugs encontrados com o wt.exe alias
+- Os perfis agora mostram um ícone se eles foram ocultos ou se referem a programas que foram desinstalados.
 
-Confira nossa página de lançamentos no GitHub para obter mais detalhes.
+Consulte nossa página de versões do GitHub para obter detalhes adicionais.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-ploc/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-ploca/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-plocm/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ru-RU/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     Версия __VERSION_NUMBER__
 
-– Мы переписали, как консольные приложения размещаются внутри Терминала! Сообщайте о любых ошибках, с которыми вы столкнулись.
-– Терминал теперь поддерживает форматы Sixel!
-– Теперь вы можете открыть закрепленную панель, содержащую фрагменты команд, которые вы сохранили для использования в дальнейшем
-– Пользователи командной строки в новейшем выпуске Windows 11 могут увидеть значок "краткой подсказки", который предлагает устанавливаемые программы из WinGet
-– Выделенный текст теперь станет более видимым (и настраиваемым!)
-– Исправлено несколько ошибок надежности, проблем с удобством, а также устранены раздражающие моменты.
+- Мы добавили в пользовательский интерфейс десятки параметров, которые существовали только в JSON-файле, включая новую страницу для настройки макета меню "Новая вкладка".
+- Для повышения надежности мы переупоряхлили управление окнами; создайте все ошибки, обнаруженные с wt.exe псевдонимом
+- Профили теперь показывают значок, если они скрыты или ссылаются на программы, которые были удалены.
 
 Дополнительные сведения см. на странице выпусков GitHub.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/zh-CN/PDP.xml

@@ -54,16 +54,13 @@
     
   </DevStudio>
   <ReleaseNotes>
-    Version __VERSION_NUMBER__
+    版本 __VERSION_NUMBER__
 
-- 我们已改变主机应用程序在终端内的托管方式!请报告遇到的任何 bug。
-- 终端现在支持 Sixels!
-- 现在可以打开一个停靠面板，其中包含已保存供以后使用的命令片段
-- 最新 Windows 11 版本上的命令提示用户可能会看到“快速提示”图标，该图标建议从 WinGet 安装软件
-- 所选文本现在将具有更高的可见性(和可自定义性!)
-- 修复了许多可靠性 bug、便利性问题和令人烦恼的问题。
+- 我们向用户界面添加了许多设置，这些设置仅存在于 JSON 文件中，包括用于自定义“新建标签页”菜单布局的新页面！
+- 我们已重新检测窗口管理以提高可靠性;请将遇到的任何 bug 归档为 wt.exe 别名
+- 如果配置文件已隐藏或引用已卸载的程序，则它们现在将显示一个图标。
 
-有关其他详细信息，请参阅我们的 GitHub 发布页面。
+有关其他详细信息，请参阅 GitHub 发布页面。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/zh-TW/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     版本 __VERSION_NUMBER__
 
-- 我們已重寫主機應用程式在終端機內託管的方式!請報告您遇到的錯誤。
-- 終端機現在支援 Sixels!
-- 現在，您可以開啟包含已儲存命令程式碼片段的固定面板，以供稍後使用
-- 最新 Windows 11 版本中的 [命令提示] 使用者可能會看到「快速提示」圖示，建議可自 WinGet 安裝的軟體
-- 選取的文字現在會更明顯 (且可自訂!)
-- 已修正一些可靠性錯誤、便利性問題和令人困擾的問題。
+- 我們已新增數十個只存在於 JSON 檔案中的設定到 UI，包括自定義 [新索引標籤] 功能表版面配置的新頁面！
+- 我們已重新設定視窗管理，以改善可靠性;請提出您在 wt.exe 別名遇到的任何錯誤
+- 設定文件現在會在隱藏或參照已卸載的程式時顯示圖示。
 
-如需更多詳細資訊，請參閱我們的 GitHub 發行頁面。
+如需詳細數據，請參閱我們的 GitHub 版本頁面。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/de-DE/PDP.xml

@@ -56,12 +56,12 @@ Dies ist ein Open Source-Projekt, und wir freuen uns über die Teilnahme an der
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-– Terminal speichert jetzt den Inhalt des Fensters, wenn Sie die Sitzungswiederherstellung verwenden.
-– Sie können jetzt mehrere Schriftarten gleichzeitig verwenden.
-– Kästchenzeichnende Zeichen werden jetzt pixelgenau gerendert.
-– Die Verwendung eines IME innerhalb des Terminals wurde erheblich verbessert.
-– Die Farbschemas in Ihrer JSON-Datei sind jetzt viel einfacher.
-– Eine Reihe von Fehlern im Zusammenhang mit der URL-Verarbeitung, Zeilen mit doppelter Breite, Zeilenumbruch und mehr wurden behoben.
+– Wir haben umgeschrieben, wie Konsolenanwendungen im Terminal gehostet werden! Melden Sie alle auftretenden Fehler.
+– Terminal unterstützt jetzt Sixels!
+– Sie können jetzt einen angedockten Bereich öffnen, der Ausschnitte von Befehlen enthält, die Sie gespeichert haben, um sie später zu verwenden.
+– Für Benutzer der Eingabeaufforderung der neuesten Version von Windows 11 wird möglicherweise ein QuickInfo-Symbol angezeigt, das installierbare Software von WinGet vorschlägt.
+– Ausgewählter Text wird jetzt viel sichtbarer (und anpassbarer!).
+- Eine Reihe von Zuverlässigkeitsfehlern, Benutzerfreundlichkeitsproblemen und Ärgernissen wurden behoben.
 
 Weitere Informationen finden Sie auf unserer GitHub-Releaseseite.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/en-US/PDP.xml

@@ -56,12 +56,12 @@ This is an open source project and we welcome community participation. To partic
   <ReleaseNotes _locID="App_ReleaseNotes">
     <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__} App Release Note" -->Version __VERSION_NUMBER__
 
-- Terminal will now remember the contents of the window when you use session restoration.
-- You can now use multiple fonts at the same time.
-- Box-drawing characters are now rendered with pixel perfection.
-- The experience of using an IME inside Terminal has been significantly improved.
-- The color schemes inside your JSON file will now be much simpler.
-- A number of bugs around URL handling, double-width rows, line wrapping, and more have been fixed.
+- We've rewritten how console applications are hosted inside Terminal! Please report any bugs you encounter.
+- Terminal now supports Sixels!
+- You can now open a docked panel containing snippets of commands you have saved to use later
+- Command Prompt users on the latest Windows 11 release may see a "quick tip" icon that suggests installable software from WinGet
+- Selected text will now be much more visible (and customizable!)
+- A number of reliabilty bugs, convenience issues and annoyances have been fixed.
 
 Please see our GitHub releases page for additional details.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/es-ES/PDP.xml

@@ -56,12 +56,12 @@ Este es un proyecto de fuente abierta y animamos a la comunidad a participar. Pa
   <ReleaseNotes>
     Versión __VERSION_NUMBER__
 
-- Terminal recordará ahora el contenido de la ventana cuando use la restauración de la sesión.
-- Ahora puede usar varias fuentes al mismo tiempo.
-- Los caracteres que dibujan recuadros ahora se representan con precisión de píxel.
-- Se ha mejorado significativamente la experiencia de utilizar un IME dentro de Terminal.
-- Las combinaciones de colores dentro del archivo JSON ahora serán mucho más sencillas.
-- Se han corregido varios errores relacionados con el control de direcciones URL, las filas de ancho doble, el ajuste de líneas y mucho más.
+- Hemos reescrito cómo se hospedan las aplicaciones de consola en Terminal. Informe de los errores que encuentre.
+- Terminal ahora admite síxeles.
+- Ahora puede abrir un panel acoplado que contenga fragmentos de comandos que haya guardado para usarlos más adelante
+- Los usuarios del símbolo del sistema de la versión más reciente de Windows 11 pueden ver un icono de "sugerencia rápida" que sugiere software instalable de WinGet
+- El texto seleccionado ahora será mucho más visible (y personalizable)
+- Se han corregido varios errores de fiabilidad, problemas de comodidad y molestias.
 
 Consulte la página de versiones de GitHub para más información.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/fr-FR/PDP.xml

@@ -56,14 +56,14 @@ Il s’agit d’un projet open source et nous encourageons la participation à l
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-- Le terminal mémorisera désormais le contenu de la fenêtre lorsque vous utiliserez la restauration de session.
-- Vous pouvez désormais utiliser plusieurs polices en même temps.
-- Les personnages dessinés en boîte sont désormais rendus avec une perfection de pixel.
-- L'expérience d'utilisation d'un IME dans le Terminal a été considérablement améliorée.
-- Les schémas de couleurs à l'intérieur de votre fichier JSON seront désormais beaucoup plus simples.
-- Un certain nombre de bugs concernant la gestion des URL, les lignes à double largeur, le retour à la ligne, etc. ont été corrigés.
+– Nous avons réécrit la manière dont les applications de console sont hébergées dans Terminal ! Veuillez signaler tout bogue que vous rencontrez.
+– Terminal prend désormais en charge Sixels !
+– Vous pouvez maintenant ouvrir un panneau ancré contenant des extraits de commandes que vous avez enregistrées pour les utiliser ultérieurement
+– Les utilisateurs de l’invite de commande sur la dernière version de Windows 11 peuvent voir une icône « astuce rapide » qui suggère un logiciel installable à partir de WinGet
+– Le texte sélectionné sera désormais beaucoup plus visible (et personnalisable !)
+– Un certain nombre de bogues de fiabilité, de problèmes de commodité et de désagréments ont été corrigés.
 
-Veuillez consulter notre page de versions GitHub pour plus de détails.
+Veuillez consulter notre page des versions GitHub pour découvrir d’autres détails.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/it-IT/PDP.xml

@@ -54,16 +54,16 @@ Si tratta di un progetto open source e la partecipazione della community è molt
     
   </DevStudio>
   <ReleaseNotes>
-    Versione __VERSION_NUMBER__ 
+    Versione __VERSION_NUMBER__
 
-- Il terminale ricorda ora il contenuto della finestra quando si usa il ripristino della sessione.
-- È ora possibile usare più tipi di carattere contemporaneamente.
-- I caratteri tracciati vengono ora sottoposti a rendering con pixel di perfezionamento.
-- L'esperienza di utilizzo di un IME all'interno di Terminale è stata notevolmente migliorata.
-- Le combinazioni di colori all'interno del file JSON saranno ora molto più semplici.
-- Sono stati corretti alcuni bug relativi alla gestione degli URL, alle righe a doppia larghezza, al ritorno a capo delle righe e altro ancora.
+- Abbiamo cambiato il modo in cui le applicazioni della console vengono ospitate all’interno di Terminale. Segnala eventuali bug riscontrati.
+- Ora Terminale supporta i Sixel.
+- Puoi aprire un pannello ancorato contenente frammenti di comandi salvati per usarli in seguito
+- Gli utenti che usano il prompt dei comandi nella versione più recente di Windows 11 potrebbero visualizzare un’icona di “suggerimento rapido” che consiglia il software installabile da WinGet
+- Il testo selezionato sarà ora molto più visibile, oltre che personalizzabile.
+- Sono stati risolti diversi bug di affidabilità e problemi di ordine pratico.
 
-Per altri dettagli, vedi la pagina delle versioni di GitHub.
+Per altri dettagli, vedi la pagina delle release di GitHub.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/ja-JP/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     バージョン __VERSION_NUMBER__
 
-- セッションの復元を使用すると、ターミナルがウィンドウの内容を記憶するようになりました。
-- 複数のフォントを同時に使用できるようになりました。
-- ボックス描画文字がピクセル単位の精度でレンダリングされるようになりました。
-- ターミナル内での IME の使用エクスペリエンスが大幅に改善されました。
-- JSON ファイル内の配色がはるかにシンプルになりました。
-- URL 処理、二重幅の行、行の折り返しなどに関するいくつかのバグが修正されました。
+- ターミナル内でのコンソール アプリケーションのホスト方法を書き換えました。発生したバグを報告してください。
+- ターミナルで Sixels がサポートされるようになりました。
+- 後で使用するために保存したコマンドのスニペットを含むドッキング パネルを開けるようになりました
+- 最新の Windows 11 リリースのコマンド プロンプト ユーザーには、WinGet からインストール可能なソフトウェアを提案する "クイック ヒント" アイコンが表示される場合があります
+- 選択したテキストが大幅に見やすくなりました (カスタマイズも可能です)
+- 信頼性に関するバグ、利便性の問題、不快な問題の多くが修正されました。
 
 詳細については、GitHub リリース ページをご覧ください。
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/ko-KR/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     버전 __VERSION_NUMBER__
 
-- 터미널은 이제 세션 복원을 사용할 때 창의 내용을 기억합니다.
-- 이제 여러 글꼴을 동시에 사용할 수 있습니다.
-- 상자 그리기 캐릭터가 이제 픽셀 완성도로 렌더링됩니다.
-- 터미널 내에서 IME를 사용하는 환경이 크게 개선되었습니다. 
-- 이제 JSON 파일 내의 색 구성표가 훨씬 더 간단해집니다.
-- URL 처리, 이중 너비 행, 줄 바꿈 등과 관련된 여러 버그가 수정되었습니다.
+- 콘솔 애플리케이션이 터미널 내에서 호스팅되는 방법을 다시 작성했습니다. 버그가 발생하면 보고해 주세요.
+- 터미널에서 이제 Sixels를 지원합니다.
+- 이제 나중에 사용하기 위해 저장한 명령 조각이 포함된 도킹된 패널을 열 수 있습니다.
+- 최신 Windows 11 릴리스의 명령 프롬프트 사용자는 WinGet에서 설치 가능한 소프트웨어를 추천하는 "간단한 팁" 아이콘을 볼 수 있습니다.
+- 이제 선택한 텍스트가 훨씬 더 잘 보입니다(사용자 지정 가능).
+- 여러 안정성 버그, 편의성 문제, 불편 사항이 수정되었습니다.
 
 자세한 내용은 GitHub 릴리스 페이지를 참조하세요.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/pt-BR/PDP.xml

@@ -56,12 +56,12 @@ Este é um projeto de código aberto e a participação da comunidade é bem-vin
   <ReleaseNotes>
     Versão __VERSION_NUMBER__
 
-- O terminal agora se lembra do conteúdo da janela quando você usa a restauração de sessão.
-- Agora você pode usar várias fontes ao mesmo tempo.
-- Os caracteres da caixa de desenho agora são renderizados com a perfeição de pixels.
-- A experiência de usar uma IME dentro do Terminal foi significativamente aprimorada.
-- Os esquemas de cores dentro do seu arquivo JSON agora estão muito mais simples.
-- Foram corrigidos vários bugs envolvendo o tratamento de URLs, linhas de largura dupla, quebra de linha automática e muito mais.
+– Reescrevemos a forma como os aplicativos de console são hospedados no Terminal! Relate os bugs encontrados.
+– O terminal agora oferece suporte ao Sixels!
+– Agora você pode abrir um painel acoplado contendo snippets de comandos que você salvou para usar mais tarde
+– Os usuários do Prompt de Comando na versão mais recente do Windows 11 podem ver um ícone de "dica rápida", que sugere softwares instaláveis a partir do WinGet
+– O texto selecionado agora ficará muito mais visível (e personalizável!)
+– Vários bugs de confiabilidade, problemas de conveniência e incômodos foram resolvidos.
 
 Confira nossa página de lançamentos no GitHub para obter mais detalhes.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/qps-ploc/PDP.xml

@@ -56,14 +56,14 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ŧēгмíйǻŀ шιļł ñσщ řėmėmвзґ τђз ςоńţëηťŝ σƒ ŧћé ẅιⁿδőщ ẅђеή ýóύ ŭš℮ şεššîóŋ řėşτŏѓдτіόŋ. !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Ύоџ ςàⁿ ŋóώ ũşэ múľŧìφľё ƒоʼnťş àт ťħе ѕâmз тìме. !!! !!! !!! !!! !!!
-- Вό×-ðгăшĭиġ ¢ĥаяäςтеřѕ äřę ηоẁ ѓëńđêяεď ẁϊτђ φïжêĺ φėŗƒēςŧΐøй. !!! !!! !!! !!! !!! !!! !
-- Ťħέ ĕхφêŕï℮ηĉε ŏƒ ύѕïйġ ǻʼn ÎМË îńšïďê Τєřmíлäļ нαŝ ьēέň ѕιĝήîƒіčäπţŀý ĩмφґθνзđ. !!! !!! !!! !!! !!! !!! !!! !!!
-- Ťĥę čöℓοг şçђėmęš ιʼnśΐδê убџѓ ĴŠОИ ƒϊŀε ωĭŀł ʼnθω вз мúçĥ ѕїмρℓёґ. !!! !!! !!! !!! !!! !!! !!
-- Á ήũmьéŕ òƒ вµġŝ άřòūñδ ÛҐĿ ħàŋδľįйģ, ðőџъŀε-ŵĭďτђ ŗōẁš, ŀϊπė ẃяąрρΐηğ, âⁿđ мŏř℮ ĥāνě везŋ ƒï×έð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
+- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
+- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
+- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
 
-Ρļēªšê ŝέė őůг ĜīтĤųъ яëŀεäśēś рдġэ ƒõя ãδðìτϊöňãł δèτâĩĺѕ. !!! !!! !!! !!! !!! !!!
+Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/qps-ploca/PDP.xml

@@ -56,14 +56,14 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ŧēгмíйǻŀ шιļł ñσщ řėmėmвзґ τђз ςоńţëηťŝ σƒ ŧћé ẅιⁿδőщ ẅђеή ýóύ ŭš℮ şεššîóŋ řėşτŏѓдτіόŋ. !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Ύоџ ςàⁿ ŋóώ ũşэ múľŧìφľё ƒоʼnťş àт ťħе ѕâmз тìме. !!! !!! !!! !!! !!!
-- Вό×-ðгăшĭиġ ¢ĥаяäςтеřѕ äřę ηоẁ ѓëńđêяεď ẁϊτђ φïжêĺ φėŗƒēςŧΐøй. !!! !!! !!! !!! !!! !!! !
-- Ťħέ ĕхφêŕï℮ηĉε ŏƒ ύѕïйġ ǻʼn ÎМË îńšïďê Τєřmíлäļ нαŝ ьēέň ѕιĝήîƒіčäπţŀý ĩмφґθνзđ. !!! !!! !!! !!! !!! !!! !!! !!!
-- Ťĥę čöℓοг şçђėmęš ιʼnśΐδê убџѓ ĴŠОИ ƒϊŀε ωĭŀł ʼnθω вз мúçĥ ѕїмρℓёґ. !!! !!! !!! !!! !!! !!! !!
-- Á ήũmьéŕ òƒ вµġŝ άřòūñδ ÛҐĿ ħàŋδľįйģ, ðőџъŀε-ŵĭďτђ ŗōẁš, ŀϊπė ẃяąрρΐηğ, âⁿđ мŏř℮ ĥāνě везŋ ƒï×έð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
+- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
+- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
+- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
 
-Ρļēªšê ŝέė őůг ĜīтĤųъ яëŀεäśēś рдġэ ƒõя ãδðìτϊöňãł δèτâĩĺѕ. !!! !!! !!! !!! !!! !!!
+Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/qps-plocm/PDP.xml

@@ -56,14 +56,14 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ŧēгмíйǻŀ шιļł ñσщ řėmėmвзґ τђз ςоńţëηťŝ σƒ ŧћé ẅιⁿδőщ ẅђеή ýóύ ŭš℮ şεššîóŋ řėşτŏѓдτіόŋ. !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Ύоџ ςàⁿ ŋóώ ũşэ múľŧìφľё ƒоʼnťş àт ťħе ѕâmз тìме. !!! !!! !!! !!! !!!
-- Вό×-ðгăшĭиġ ¢ĥаяäςтеřѕ äřę ηоẁ ѓëńđêяεď ẁϊτђ φïжêĺ φėŗƒēςŧΐøй. !!! !!! !!! !!! !!! !!! !
-- Ťħέ ĕхφêŕï℮ηĉε ŏƒ ύѕïйġ ǻʼn ÎМË îńšïďê Τєřmíлäļ нαŝ ьēέň ѕιĝήîƒіčäπţŀý ĩмφґθνзđ. !!! !!! !!! !!! !!! !!! !!! !!!
-- Ťĥę čöℓοг şçђėmęš ιʼnśΐδê убџѓ ĴŠОИ ƒϊŀε ωĭŀł ʼnθω вз мúçĥ ѕїмρℓёґ. !!! !!! !!! !!! !!! !!! !!
-- Á ήũmьéŕ òƒ вµġŝ άřòūñδ ÛҐĿ ħàŋδľįйģ, ðőџъŀε-ŵĭďτђ ŗōẁš, ŀϊπė ẃяąрρΐηğ, âⁿđ мŏř℮ ĥāνě везŋ ƒï×έð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
+- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
+- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
+- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
 
-Ρļēªšê ŝέė őůг ĜīтĤųъ яëŀεäśēś рдġэ ƒõя ãδðìτϊöňãł δèτâĩĺѕ. !!! !!! !!! !!! !!! !!!
+Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/ru-RU/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     Версия __VERSION_NUMBER__
 
-– Терминал теперь будет запоминать содержимое окна при восстановлении сеанса.
-– Теперь вы можете использовать несколько шрифтов одновременно.
-– Символы псевдографики теперь отрисовываются с пиксельной точностью.
-– Значительно улучшена возможность использования IME внутри Терминала.
-– Цветовые схемы в JSON-файле теперь будут намного проще.
-– Исправлено несколько ошибок в обработке URL-адресов, строках двойной ширины, переносе строк и т. д.
+– Мы переписали, как консольные приложения размещаются внутри Терминала! Сообщайте о любых ошибках, с которыми вы столкнулись.
+– Терминал теперь поддерживает форматы Sixel!
+– Теперь вы можете открыть закрепленную панель, содержащую фрагменты команд, которые вы сохранили для использования в дальнейшем
+– Пользователи командной строки в новейшем выпуске Windows 11 могут увидеть значок "краткой подсказки", который предлагает устанавливаемые программы из WinGet
+– Выделенный текст теперь станет более видимым (и настраиваемым!)
+– Исправлено несколько ошибок надежности, проблем с удобством, а также устранены раздражающие моменты.
 
 Дополнительные сведения см. на странице выпусков GitHub.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/zh-CN/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-- 现在，使用会话还原时，终端将记住窗口的内容。
-- 现在可以同时使用多种字体。
-- 现在以像素为单位呈现框绘图字符。
-- 在终端内使用输入法的体验已得到显著提升。
-- JSON 文件中的配色方案现在要简单得多。
-- 已修复有关 URL 处理、双倍行宽、换行等大量 bug。
+- 我们已改变主机应用程序在终端内的托管方式!请报告遇到的任何 bug。
+- 终端现在支持 Sixels!
+- 现在可以打开一个停靠面板，其中包含已保存供以后使用的命令片段
+- 最新 Windows 11 版本上的命令提示用户可能会看到“快速提示”图标，该图标建议从 WinGet 安装软件
+- 所选文本现在将具有更高的可见性(和可自定义性!)
+- 修复了许多可靠性 bug、便利性问题和令人烦恼的问题。
 
 有关其他详细信息，请参阅我们的 GitHub 发布页面。
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/zh-TW/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     版本 __VERSION_NUMBER__
 
-- 當您使用工作階段還原時，終端機現在會記住視窗的內容。
-- 現在您可以同時使用多個字型。
-- 製表格圖字元現在會以完美像素模式呈現。
-- 在終端機內使用 IME 的體驗已大幅改善。
-- JSON 檔案內的色彩配置現在將變得更簡單了。
-- 已修正一些 URL 處理、雙寬度列、換行等相關錯誤。
+- 我們已重寫主機應用程式在終端機內託管的方式!請報告您遇到的錯誤。
+- 終端機現在支援 Sixels!
+- 現在，您可以開啟包含已儲存命令程式碼片段的固定面板，以供稍後使用
+- 最新 Windows 11 版本中的 [命令提示] 使用者可能會看到「快速提示」圖示，建議可自 WinGet 安裝的軟體
+- 選取的文字現在會更明顯 (且可自訂!)
+- 已修正一些可靠性錯誤、便利性問題和令人困擾的問題。
 
 如需更多詳細資訊，請參閱我們的 GitHub 發行頁面。
   </ReleaseNotes>

build/config/esrp.build.batch.wpfdotnet.json

@@ -6,6 +6,20 @@
         ],
         "SigningInfo": {
             "Operations": [
+                {
+                    "KeyCode": "CP-233904-SN",
+                    "OperationSetCode": "StrongNameSign",
+                    "ToolName": "sign",
+                    "ToolVersion": "1.0",
+                    "Parameters": []
+                },
+                {
+                    "KeyCode": "CP-233904-SN",
+                    "OperationSetCode": "StrongNameVerify",
+                    "ToolName": "sign",
+                    "ToolVersion": "1.0",
+                    "Parameters": []
+                },
                 {
                     "KeyCode": "CP-230012",
                     "OperationSetCode": "SigntoolSign",

build/packages.config

@@ -1,6 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
-  <package id="MUXCustomBuildTasks" version="1.0.48" targetFramework="native" />
   <package id="Microsoft.Taef" version="10.93.240607003" targetFramework="native" />
   <package id="Microsoft.Internal.PGO-Helpers.Cpp" version="0.2.34" targetFramework="native" />
   <package id="Microsoft.Debugging.Tools.PdbStr" version="20220617.1556.0" targetFramework="native" />

build/pipelines/templates-v2/job-deploy-to-azure-storage.yml

@@ -75,18 +75,13 @@ jobs:
       }
     displayName: "Wrangle Unpackaged builds into place, rename"
 
-  - powershell: |-
-      Get-PackageProvider -Name NuGet -ForceBootstrap
-      Install-Module -Verbose -AllowClobber -Force Az.Accounts, Az.Storage, Az.Network, Az.Resources, Az.Compute
-    displayName: Install Azure Module Dependencies
-
-  - task: AzureFileCopy@6
+  - task: AzurePowerShell@5
     displayName: Publish to Storage Account
     inputs:
-      sourcePath: _out/*
-      Destination: AzureBlob
       azureSubscription: ${{ parameters.subscription }}
-      storage: ${{ parameters.storageAccount }}
-      ContainerName: ${{ parameters.storageContainer }}
-      AdditionalArgumentsForBlobCopy: "--content-type application/octet-stream"
-
+      azurePowerShellVersion: LatestVersion
+      pwsh: true
+      ScriptType: InlineScript
+      Inline: |-
+        $Env:AZCOPY_AUTO_LOGIN_TYPE="PSCRED"
+        & AzCopy copy "_out\*" "https://${{ parameters.storageAccount }}.blob.core.windows.net/${{ parameters.storageContainer }}/" --content-type application/octet-stream

build/pipelines/templates-v2/job-merge-msix-into-bundle.yml

@@ -147,6 +147,10 @@ jobs:
         ValidateSignature: true
         Verbosity: 'Verbose'
 
+  - pwsh: |-
+      tar -c -v --format=zip -f "$(JobOutputDirectory)/GroupPolicyTemplates_$(XES_APPXMANIFESTVERSION).zip" -C "$(Build.SourcesDirectory)/policies" *
+    displayName: Package GPO Templates
+
   - ${{ parameters.afterBuildSteps }}
 
   - ${{ if eq(parameters.publishArtifacts, true) }}:

build/pipelines/templates-v2/job-publish-symbols-using-symbolrequestprod-api.yml

@@ -52,11 +52,6 @@ jobs:
       itemPattern: '**/*.pdb'
       targetPath: '$(Build.SourcesDirectory)/bin'
 
-  - powershell: |-
-      Get-PackageProvider -Name NuGet -ForceBootstrap
-      Install-Module -Verbose -AllowClobber -Force Az.Accounts, Az.Storage, Az.Network, Az.Resources, Az.Compute
-    displayName: Install Azure Module Dependencies
-
   # Transit the Azure token from the Service Connection into a secret variable for the rest of the pipeline to use.
   - task: AzurePowerShell@5
     displayName: Generate an Azure Token

build/pipelines/templates-v2/pipeline-onebranch-full-release-build.yml

@@ -78,7 +78,9 @@ extends:
     template: v2/Microsoft.NonOfficial.yml@templates
   parameters:
     featureFlags:
-      WindowsHostVersion: 1ESWindows2022
+      WindowsHostVersion:
+        Version: 2022
+        Network: R1
     platform:
       name: 'windows_undocked'
       product: 'Windows Terminal'

build/pipelines/templates-v2/steps-ensure-nuget-version.yml

@@ -1,5 +1,12 @@
 steps:
-- task: NuGetToolInstaller@1
-  displayName: Use NuGet 6.6.1
-  inputs:
-    versionSpec: 6.6.1
+- ${{ if eq(variables['System.CollectionId'], 'cb55739e-4afe-46a3-970f-1b49d8ee7564') }}:
+  - pwsh: |-
+      Write-Host "Assuming NuGet is already installed..."
+      & nuget.exe help
+    displayName: Assume NuGet is fine
+
+- ${{ else }}:
+  - task: NuGetToolInstaller@1
+    displayName: Use NuGet 6.6.1
+    inputs:
+      versionSpec: 6.6.1

custom.props

@@ -3,9 +3,9 @@
   <!-- This file is read by XES, which we use in our Release builds. -->
   <PropertyGroup Label="Version">
     <XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
-    <XesBaseYearForStoreVersion>2024</XesBaseYearForStoreVersion>
+    <XesBaseYearForStoreVersion>2025</XesBaseYearForStoreVersion>
     <VersionMajor>1</VersionMajor>
-    <VersionMinor>23</VersionMinor>
+    <VersionMinor>24</VersionMinor>
     <VersionInfoProductName>Windows Terminal</VersionInfoProductName>
   </PropertyGroup>
 </Project>

dep/vcpkg-overlay-ports/fmt/fix-write-batch.patch

@@ -0,0 +1,13 @@
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 88c12148..967b53dd 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -260,7 +260,7 @@ if (FMT_MASTER_PROJECT AND CMAKE_GENERATOR MATCHES "Visual Studio")
+   join(netfxpath
+        "C:\\Program Files\\Reference Assemblies\\Microsoft\\Framework\\"
+        ".NETFramework\\v4.0")
+-  file(WRITE run-msbuild.bat "
++  file(WRITE "${CMAKE_BINARY_DIR}/run-msbuild.bat" "
+     ${MSBUILD_SETUP}
+     ${CMAKE_MAKE_PROGRAM} -p:FrameworkPathOverride=\"${netfxpath}\" %*")
+ endif ()

dep/vcpkg-overlay-ports/fmt/portfile.cmake

@@ -0,0 +1,38 @@
+vcpkg_from_github(
+    OUT_SOURCE_PATH SOURCE_PATH
+    REPO fmtlib/fmt
+    REF "${VERSION}"
+    SHA512 573b7de1bd224b7b1b60d44808a843db35d4bc4634f72a9edcb52cf68e99ca66c744fd5d5c97b4336ba70b94abdabac5fc253b245d0d5cd8bbe2a096bf941e39
+    HEAD_REF master
+    PATCHES
+        fix-write-batch.patch
+)
+
+vcpkg_cmake_configure(
+    SOURCE_PATH "${SOURCE_PATH}"
+    OPTIONS
+        -DFMT_CMAKE_DIR=share/fmt
+        -DFMT_TEST=OFF
+        -DFMT_DOC=OFF
+        -DFMT_PEDANTIC=ON
+)
+
+vcpkg_cmake_install()
+vcpkg_cmake_config_fixup()
+vcpkg_fixup_pkgconfig()
+vcpkg_copy_pdbs()
+
+if(VCPKG_LIBRARY_LINKAGE STREQUAL dynamic)
+    vcpkg_replace_string("${CURRENT_PACKAGES_DIR}/include/fmt/base.h"
+        "defined(FMT_SHARED)"
+        "1"
+    )
+endif()
+
+file(REMOVE_RECURSE
+    "${CURRENT_PACKAGES_DIR}/debug/include"
+    "${CURRENT_PACKAGES_DIR}/debug/share"
+)
+
+file(INSTALL "${CMAKE_CURRENT_LIST_DIR}/usage" DESTINATION "${CURRENT_PACKAGES_DIR}/share/${PORT}")
+vcpkg_install_copyright(FILE_LIST "${SOURCE_PATH}/LICENSE")

dep/vcpkg-overlay-ports/fmt/usage

@@ -0,0 +1,8 @@
+The package fmt provides CMake targets:
+
+    find_package(fmt CONFIG REQUIRED)
+    target_link_libraries(main PRIVATE fmt::fmt)
+
+    # Or use the header-only version
+    find_package(fmt CONFIG REQUIRED)
+    target_link_libraries(main PRIVATE fmt::fmt-header-only)

dep/vcpkg-overlay-ports/fmt/vcpkg.json

@@ -0,0 +1,17 @@
+{
+  "name": "fmt",
+  "version": "11.1.4",
+  "description": "{fmt} is an open-source formatting library providing a fast and safe alternative to C stdio and C++ iostreams.",
+  "homepage": "https://github.com/fmtlib/fmt",
+  "license": "MIT",
+  "dependencies": [
+    {
+      "name": "vcpkg-cmake",
+      "host": true
+    },
+    {
+      "name": "vcpkg-cmake-config",
+      "host": true
+    }
+  ]
+}

doc/cascadia/profiles.schema.json

@@ -2480,11 +2480,6 @@
           "minimum": 1,
           "type": "integer"
         },
-        "startOnUserLogin": {
-          "default": false,
-          "description": "When set to true, this enables the launch of Terminal at startup. Setting this to false will disable the startup task entry. If the Terminal startup task entry is disabled either by org policy or by user action this setting will have no effect.",
-          "type": "boolean"
-        },
         "firstWindowPreference": {
           "default": "defaultProfile",
           "description": "Defines what behavior the terminal takes when it starts. \"defaultProfile\" will have the terminal launch with one tab of the default profile, and \"persistedWindowLayout\" will cause the terminal to save its layout on close and reload it on open.",
@@ -3119,12 +3114,13 @@
         },
         "pathTranslationStyle": {
           "default": "none",
-          "description": "Controls how file paths are transformed when they are dragged and dropped on the terminal. Possible values are \"none\", \"wsl\", \"cygwin\" and \"msys2\".",
+          "description": "Controls how file paths are transformed when they are dragged and dropped on the terminal. Possible values are \"none\", \"wsl\", \"cygwin\", \"msys2\" and \"mingw\".",
           "enum": [
             "none",
             "wsl",
             "cygwin",
-            "msys2"
+            "msys2",
+            "mingw"
           ],
           "type": "string"
         }

policies/WindowsTerminal.admx

@@ -9,6 +9,7 @@
   <supportedOn>
     <definitions>
       <definition name="SUPPORTED_WindowsTerminal_1_21" displayName="$(string.SUPPORTED_WindowsTerminal_1_21)" />
+      <definition name="SUPPORTED_DefaultTerminalApplication" displayName="$(string.SUPPORTED_DefaultTerminalApplication)" />
     </definitions>
   </supportedOn>
   <categories>
@@ -24,5 +25,61 @@
         <multiText id="DisabledProfileSources" valueName="DisabledProfileSources" required="true" />
       </elements>
     </policy>
+    <policy name="DefaultTerminalApplication" class="User" displayName="$(string.DefaultTerminalApplication)" explainText="$(string.DefaultTerminalApplicationText)" presentation="$(presentation.TermAppSelection)" key="Console\%%Startup">
+      <parentCategory ref="WindowsTerminal" />
+      <supportedOn ref="SUPPORTED_DefaultTerminalApplication" />
+      <elements>
+        <enum id="TermAppSelect" required="true" valueName="DelegationTerminal">
+          <item displayName="$(string.TermAppAutomatic)">
+            <value>
+              <string>{00000000-0000-0000-0000-000000000000}</string>
+            </value>
+            <valueList>
+              <item key="Console\%%Startup" valueName="DelegationConsole">
+                <value>
+                  <string>{00000000-0000-0000-0000-000000000000}</string>
+                </value>
+              </item>
+            </valueList>
+          </item>
+          <item displayName="$(string.TermAppConsoleHost)">
+            <value>
+              <string>{B23D10C0-E52E-411E-9D5B-C09FDF709C7D}</string>
+            </value>
+            <valueList>
+              <item key="Console\%%Startup" valueName="DelegationConsole">
+                <value>
+                  <string>{B23D10C0-E52E-411E-9D5B-C09FDF709C7D}</string>
+                </value>
+              </item>
+            </valueList>
+          </item>
+          <item displayName="$(string.TermAppWindowsTerminal)">
+            <value>
+              <string>{E12CFF52-A866-4C77-9A90-F570A7AA2C6B}</string>
+            </value>
+            <valueList>
+              <item key="Console\%%Startup" valueName="DelegationConsole">
+                <value>
+                  <string>{2EACA947-7F5F-4CFA-BA87-8F7FBEEFBE69}</string>
+                </value>
+              </item>
+            </valueList>
+          </item>
+          <item displayName="$(string.TermAppWindowsTerminalPreview)">
+            <value>
+              <string>{86633F1F-6454-40EC-89CE-DA4EBA977EE2}</string>
+            </value>
+            <valueList>
+              <item key="Console\%%Startup" valueName="DelegationConsole">
+                <value>
+                  <string>{06EC847C-C0A5-46B8-92CB-7C92F6E35CD5}</string>
+                </value>
+              </item>
+            </valueList>
+          </item>
+        </enum>
+      </elements>
+    </policy>
   </policies>
 </policyDefinitions>

policies/en-US/WindowsTerminal.adml

@@ -7,6 +7,7 @@
     <stringTable>
       <string id="WindowsTerminal">Windows Terminal</string>
       <string id="SUPPORTED_WindowsTerminal_1_21">At least Windows Terminal 1.21</string>
+      <string id="SUPPORTED_DefaultTerminalApplication">At least Windows 11 22H2 or Windows 10 22H2 (Build 19045.3031, KB5026435) with Windows Terminal 1.17</string>
       <string id="DisabledProfileSources">Disabled Profile Sources</string>
       <string id="DisabledProfileSourcesText">Profiles will not be generated from any sources listed here. Source names can be arbitrary strings. Potential candidates can be found as the "source" property on profile definitions in Windows Terminal's settings.json file.
 
@@ -18,11 +19,22 @@ Common sources are:
 For instance, setting this policy to Windows.Terminal.Wsl will disable the builtin WSL integration of Windows Terminal.
 
 Note: Existing profiles will disappear from Windows Terminal after adding their source to this policy.</string>
+      <string id="DefaultTerminalApplication">Default terminal application</string>
+      <string id="DefaultTerminalApplicationText">Select the default terminal application used in Windows.
+
+If you select Windows Terminal Preview and it is not installed the system will fallback to the legacy Windows Console Host. (Please note that the settings interfaces showing "Let windows decide" in this case as configuration.)</string>
+      <string id="TermAppAutomatic">Automatic selection (Windows Terminal, if available)</string>
+      <string id="TermAppConsoleHost">Windows Console Host (legacy)</string>
+      <string id="TermAppWindowsTerminal">Windows Terminal</string>
+      <string id="TermAppWindowsTerminalPreview">Windows Terminal Preview (if available)</string>
     </stringTable>
     <presentationTable>
       <presentation id="DisabledProfileSources">
         <multiTextBox refId="DisabledProfileSources">List of disabled sources (one per line)</multiTextBox>
       </presentation>
+      <presentation id="TermAppSelection">
+        <dropdownList refId="TermAppSelect" noSort="true" defaultItem="0">Select from the following options:</dropdownList>
+      </presentation>
     </presentationTable>
   </resources>
 </policyDefinitionResources>

src/audio/midi/lib/sources.dep

@@ -1,3 +1,3 @@
 BUILD_PASS1_CONSUMES= \
-    onecore\windows\vcpkg|PASS1 \
+    onecore\windows\core\console\vcpkg|PASS1 \
 

src/buffer/out/ImageSlice.cpp

@@ -186,18 +186,20 @@ bool ImageSlice::_copyCells(const ImageSlice& srcSlice, const til::CoordType src
     }
 
     // The used destination before and after the written area must be erased.
-    if (dstUsedBegin < dstWriteBegin)
+    // If this results in the entire range being erased, we return true to let
+    // the caller know that the slice should be deleted.
+    if (dstUsedBegin < dstWriteBegin && _eraseCells(dstUsedBegin, dstWriteBegin))
     {
-        _eraseCells(dstUsedBegin, dstWriteBegin);
+        return true;
     }
-    if (dstUsedEnd > dstWriteEnd)
+    if (dstUsedEnd > dstWriteEnd && _eraseCells(dstWriteEnd, dstUsedEnd))
     {
-        _eraseCells(dstWriteEnd, dstUsedEnd);
+        return true;
     }
 
-    // If the beginning column is now not less than the end, that means the
-    // content has been entirely erased, so we return true to let the caller
-    // know that the slice should be deleted.
+    // At this point, if the beginning column is not less than the end, that
+    // means this was an empty slice into which nothing was copied, so we can
+    // again return true to let the caller know it should be deleted.
     return _columnBegin >= _columnEnd;
 }
 
@@ -210,10 +212,19 @@ void ImageSlice::EraseBlock(TextBuffer& buffer, const til::rect rect)
     }
 }
 
-void ImageSlice::EraseCells(TextBuffer& buffer, const til::point at, const size_t distance)
+void ImageSlice::EraseCells(TextBuffer& buffer, const til::point at, const til::CoordType distance)
 {
-    auto& row = buffer.GetMutableRowByOffset(at.y);
-    EraseCells(row, at.x, gsl::narrow_cast<til::CoordType>(at.x + distance));
+    auto x = at.x;
+    auto y = at.y;
+    auto distanceRemaining = distance;
+    while (distanceRemaining > 0)
+    {
+        auto& row = buffer.GetMutableRowByOffset(y);
+        EraseCells(row, x, x + distanceRemaining);
+        distanceRemaining -= (static_cast<til::CoordType>(row.size()) - x);
+        x = 0;
+        y++;
+    }
 }
 
 void ImageSlice::EraseCells(ROW& row, const til::CoordType columnBegin, const til::CoordType columnEnd)

src/buffer/out/ImageSlice.hpp

@@ -41,7 +41,7 @@ public:
     static void CopyRow(const ROW& srcRow, ROW& dstRow);
     static void CopyCells(const ROW& srcRow, const til::CoordType srcColumn, ROW& dstRow, const til::CoordType dstColumnBegin, const til::CoordType dstColumnEnd);
     static void EraseBlock(TextBuffer& buffer, const til::rect rect);
-    static void EraseCells(TextBuffer& buffer, const til::point at, const size_t distance);
+    static void EraseCells(TextBuffer& buffer, const til::point at, const til::CoordType distance);
     static void EraseCells(ROW& row, const til::CoordType columnBegin, const til::CoordType columnEnd);
 
 private:

src/buffer/out/Row.cpp

@@ -431,7 +431,7 @@ OutputCellIterator ROW::WriteCells(OutputCellIterator it, const til::CoordType c
     THROW_HR_IF(E_INVALIDARG, limitRight.value_or(0) >= size());
 
     // If we're given a right-side column limit, use it. Otherwise, the write limit is the final column index available in the char row.
-    const auto finalColumnInRow = limitRight.value_or(size() - 1);
+    const auto finalColumnInRow = gsl::narrow_cast<uint16_t>(limitRight.value_or(size() - 1));
 
     auto currentColor = it->TextAttr();
     uint16_t colorUses = 0;

src/buffer/out/lib/sources.dep

@@ -1,3 +1,3 @@
 BUILD_PASS1_CONSUMES= \
-    onecore\windows\vcpkg|PASS1 \
+    onecore\windows\core\console\vcpkg|PASS1 \
 

src/buffer/out/textBuffer.cpp

@@ -2061,14 +2061,6 @@ void TextBuffer::_ExpandTextRow(til::inclusive_rect& textRow) const
     }
 }
 
-size_t TextBuffer::SpanLength(const til::point coordStart, const til::point coordEnd) const
-{
-    const auto bufferSize = GetSize();
-    // The coords are inclusive, so to get the (inclusive) length we add 1.
-    const auto length = bufferSize.CompareInBounds(coordEnd, coordStart) + 1;
-    return gsl::narrow<size_t>(length);
-}
-
 // Routine Description:
 // - Retrieves the plain text data between the specified coordinates.
 // Arguments:

src/buffer/out/textBuffer.hpp

@@ -199,8 +199,6 @@ public:
     std::wstring GetCustomIdFromId(uint16_t id) const;
     void CopyHyperlinkMaps(const TextBuffer& OtherBuffer);
 
-    size_t SpanLength(const til::point coordStart, const til::point coordEnd) const;
-
     std::wstring GetPlainText(til::point start, til::point end) const;
 
     struct CopyRequest

src/buffer/out/ut_textbuffer/sources.dep

@@ -1,3 +1,3 @@
 BUILD_PASS1_CONSUMES= \
-    onecore\windows\vcpkg|PASS1 \
+    onecore\windows\core\console\vcpkg|PASS1 \
 

src/cascadia/CascadiaResources.build.items

@@ -21,6 +21,11 @@
       <DeploymentContent>true</DeploymentContent>
       <Link>ProfileIcons\%(RecursiveDir)%(FileName)%(Extension)</Link>
     </Content>
+    <!-- Profile Generator Icons -->
+    <Content Include="$(OpenConsoleDir)src\cascadia\CascadiaPackage\ProfileGeneratorIcons\**\*">
+      <DeploymentContent>true</DeploymentContent>
+      <Link>ProfileGeneratorIcons\%(RecursiveDir)%(FileName)%(Extension)</Link>
+    </Content>
     <!-- Default Settings -->
     <Content Include="$(OpenConsoleDir)src\cascadia\TerminalSettingsModel\defaults.json">
       <DeploymentContent>true</DeploymentContent>

src/cascadia/LocalTests_TerminalApp/TabTests.cpp

@@ -287,7 +287,7 @@ namespace TerminalAppLocalTests
             NewTabArgs args{ newTerminalArgs };
             ActionAndArgs newTabAction{ ShortcutAction::NewTab, args };
             // push the arg onto the front
-            page->_startupActions.Append(newTabAction);
+            page->_startupActions.push_back(std::move(newTabAction));
             Log::Comment(L"Added a single newTab action");
 
             auto app = ::winrt::Windows::UI::Xaml::Application::Current();

src/cascadia/TerminalApp/AppActionHandlers.cpp

@@ -752,13 +752,11 @@ namespace winrt::TerminalApp::implementation
     {
         if (const auto& realArgs = actionArgs.ActionArgs().try_as<ExecuteCommandlineArgs>())
         {
-            auto actions = winrt::single_threaded_vector<ActionAndArgs>(
-                TerminalPage::ConvertExecuteCommandlineToActions(realArgs));
-
-            if (actions.Size() != 0)
+            auto actions = ConvertExecuteCommandlineToActions(realArgs);
+            if (!actions.empty())
             {
                 actionArgs.Handled(true);
-                ProcessStartupActions(actions, false);
+                ProcessStartupActions(std::move(actions), false);
             }
         }
     }

src/cascadia/TerminalApp/AppLogic.cpp

@@ -81,8 +81,6 @@ static winrt::hstring _GetErrorText(SettingsLoadErrors error)
     return _GetMessageText(static_cast<uint32_t>(error), settingsLoadErrorsLabels);
 }
 
-static constexpr std::wstring_view StartupTaskName = L"StartTerminalOnLoginTask";
-
 namespace winrt::TerminalApp::implementation
 {
     // Function Description:
@@ -184,8 +182,6 @@ namespace winrt::TerminalApp::implementation
         // this as a MTA, before the app is Create()'d
         WINRT_ASSERT(_loadedInitialSettings);
 
-        _ApplyLanguageSettingChange();
-
         TraceLoggingWrite(
             g_hTerminalAppProvider,
             "AppCreated",
@@ -335,8 +331,16 @@ namespace winrt::TerminalApp::implementation
     void AppLogic::_ApplyLanguageSettingChange() noexcept
     try
     {
+        const auto language = _settings.GlobalSettings().Language();
+
         if (!IsPackaged())
         {
+            if (!language.empty())
+            {
+                // We cannot use the packaged app API, PrimaryLanguageOverride, but we *can* tell the resource loader
+                // to set the Language for all loaded resources to the user's preferred language.
+                winrt::Windows::ApplicationModel::Resources::Core::ResourceContext::SetGlobalQualifierValue(L"Language", language);
+            }
             return;
         }
 
@@ -344,8 +348,6 @@ namespace winrt::TerminalApp::implementation
 
         // NOTE: PrimaryLanguageOverride throws if this instance is unpackaged.
         const auto primaryLanguageOverride = ApplicationLanguages::PrimaryLanguageOverride();
-        const auto language = _settings.GlobalSettings().Language();
-
         if (primaryLanguageOverride != language)
         {
             ApplicationLanguages::PrimaryLanguageOverride(language);
@@ -353,40 +355,6 @@ namespace winrt::TerminalApp::implementation
     }
     CATCH_LOG()
 
-    safe_void_coroutine AppLogic::_ApplyStartupTaskStateChange()
-    try
-    {
-        // First, make sure we're running in a packaged context. This method
-        // won't work, and will crash mysteriously if we're running unpackaged.
-        if (!IsPackaged())
-        {
-            co_return;
-        }
-
-        const auto tryEnableStartupTask = _settings.GlobalSettings().StartOnUserLogin();
-        const auto task = co_await StartupTask::GetAsync(StartupTaskName);
-
-        switch (task.State())
-        {
-        case StartupTaskState::Disabled:
-            if (tryEnableStartupTask)
-            {
-                co_await task.RequestEnableAsync();
-            }
-            break;
-        case StartupTaskState::DisabledByUser:
-            // TODO: GH#6254: define UX for other StartupTaskStates
-            break;
-        case StartupTaskState::Enabled:
-            if (!tryEnableStartupTask)
-            {
-                task.Disable();
-            }
-            break;
-        }
-    }
-    CATCH_LOG();
-
     // Method Description:
     // - Reloads the settings from the settings.json file.
     // - When this is called the first time, this initializes our settings. See
@@ -435,6 +403,9 @@ namespace winrt::TerminalApp::implementation
             _settings.LogSettingChanges(true);
         }
 
+        _ApplyLanguageSettingChange();
+        _ProcessLazySettingsChanges();
+
         if (initialLoad)
         {
             // Register for directory change notification.
@@ -445,10 +416,6 @@ namespace winrt::TerminalApp::implementation
         // Here, we successfully reloaded the settings, and created a new
         // TerminalSettings object.
 
-        _ApplyLanguageSettingChange();
-        _ApplyStartupTaskStateChange();
-        _ProcessLazySettingsChanges();
-
         auto warnings{ winrt::multi_threaded_vector<SettingsLoadWarnings>() };
         for (auto&& warn : _warnings)
         {
@@ -473,7 +440,6 @@ namespace winrt::TerminalApp::implementation
         // Both LoadSettings and ReloadSettings are supposed to call this function,
         // but LoadSettings skips it, so that the UI starts up faster.
         // Now that the UI is present we can do them with a less significant UX impact.
-        _ApplyStartupTaskStateChange();
         _ProcessLazySettingsChanges();
 
         FILETIME creationTime, exitTime, kernelTime, userTime, now;

src/cascadia/TerminalApp/AppLogic.h

@@ -76,7 +76,6 @@ namespace winrt::TerminalApp::implementation
         TerminalApp::ContentManager _contentManager{ winrt::make<implementation::ContentManager>() };
 
         void _ApplyLanguageSettingChange() noexcept;
-        safe_void_coroutine _ApplyStartupTaskStateChange();
 
         [[nodiscard]] HRESULT _TryLoadSettings() noexcept;
         void _ProcessLazySettingsChanges();

src/cascadia/TerminalApp/CommandPalette.cpp

@@ -530,6 +530,79 @@ namespace winrt::TerminalApp::implementation
         }
     }
 
+    // Method Description:
+    // - This event is called when the user's mouse pointer enters an individual
+    //   item from the list. We'll get the item that was hovered and "preview"
+    //   the command that the user hovered. To do that, we'll dispatch the switch
+    //   to tab command for this tab, but not dismiss the switcher.
+    //
+    // Arguments:
+    // - sender: the UI element that raised the event.
+    // Return Value:
+    // - <none>
+    void CommandPalette::_listItemPointerEntered(const winrt::Windows::Foundation::IInspectable& sender,
+                                                 const winrt::Windows::UI::Xaml::Input::PointerRoutedEventArgs& /*args*/)
+    {
+        // cancel any pending exit timer to prevent an unwanted preview revert
+        if (_pointerExitTimer)
+        {
+            _pointerExitTimer.Stop();
+        }
+
+        const auto listViewItem = sender.try_as<winrt::Windows::UI::Xaml::Controls::ListViewItem>();
+        if (_currentMode == CommandPaletteMode::ActionMode && listViewItem)
+        {
+            const auto enteredItem = listViewItem.Content();
+            if (const auto filteredCommand{ enteredItem.try_as<winrt::TerminalApp::FilteredCommand>() })
+            {
+                if (const auto actionPaletteItem{ filteredCommand.Item().try_as<winrt::TerminalApp::ActionPaletteItem>() })
+                {
+                    // immediately preview the hovered command
+                    PreviewAction.raise(*this, actionPaletteItem.Command());
+                }
+            }
+        }
+    }
+
+    // Method Description:
+    // - This event is called when the user's mouse pointer exits an individual
+    //   item from the list. We then revert to previewing the selected item rather
+    //   than the hovered one, using a short delay (via a DispatcherTimer) to smooth
+    //   transitions when rapidly moving between items.
+    //
+    // Arguments:
+    // - <none>
+    // Return Value:
+    // - <none>
+    void CommandPalette::_listItemPointerExited(const winrt::Windows::Foundation::IInspectable& /*sender*/,
+                                                const winrt::Windows::UI::Xaml::Input::PointerRoutedEventArgs& /*args*/)
+    {
+        // if there is no exit timer, create one
+        if (!_pointerExitTimer)
+        {
+            _pointerExitTimer = winrt::Windows::UI::Xaml::DispatcherTimer();
+            _pointerExitTimer.Interval(std::chrono::milliseconds(10));
+            _pointerExitTimer.Tick([this](auto const&, auto const&) {
+                // when the timer ticks, revert the preview to the selected command
+                const auto selectedCommand = _filteredActionsView().SelectedItem();
+                if (const auto filteredCommand{ selectedCommand.try_as<winrt::TerminalApp::FilteredCommand>() })
+                {
+                    if (_currentMode == CommandPaletteMode::ActionMode && filteredCommand)
+                    {
+                        if (const auto actionPaletteItem{ filteredCommand.Item().try_as<winrt::TerminalApp::ActionPaletteItem>() })
+                        {
+                            PreviewAction.raise(*this, actionPaletteItem.Command());
+                        }
+                    }
+                }
+                _pointerExitTimer.Stop();
+            });
+        }
+
+        // restart the timer
+        _pointerExitTimer.Start();
+    }
+
     void CommandPalette::_listItemSelectionChanged(const Windows::Foundation::IInspectable& /*sender*/, const Windows::UI::Xaml::Controls::SelectionChangedEventArgs& e)
     {
         // We don't care about...
@@ -1214,6 +1287,9 @@ namespace winrt::TerminalApp::implementation
 
         ParentCommandName(L"");
         _currentNestedCommands.Clear();
+
+        // revert any preview
+        _filteredActionsView().SelectedIndex(-1);
         PreviewAction.raise(*this, nullptr);
     }
 
@@ -1306,6 +1382,10 @@ namespace winrt::TerminalApp::implementation
         else
         {
             itemContainer.DataContext(args.Item());
+
+            // attach the pointer event handlers to the container
+            itemContainer.PointerEntered({ this, &CommandPalette::_listItemPointerEntered });
+            itemContainer.PointerExited({ this, &CommandPalette::_listItemPointerExited });
         }
     }
 

src/cascadia/TerminalApp/CommandPalette.h

@@ -78,6 +78,8 @@ namespace winrt::TerminalApp::implementation
 
         Windows::Foundation::Collections::IVector<winrt::TerminalApp::FilteredCommand> _commandsToFilter();
 
+        winrt::Windows::UI::Xaml::DispatcherTimer _pointerExitTimer{ nullptr }; // timer to debounce pointer exit events (used to smooth preview transitions)
+
         bool _lastFilterTextWasEmpty{ true };
 
         void _populateCommands();
@@ -103,6 +105,10 @@ namespace winrt::TerminalApp::implementation
 
         void _listItemClicked(const Windows::Foundation::IInspectable& sender, const Windows::UI::Xaml::Controls::ItemClickEventArgs& e);
 
+        void _listItemPointerEntered(const Windows::Foundation::IInspectable& sender, const Windows::UI::Xaml::Input::PointerRoutedEventArgs& args);
+
+        void _listItemPointerExited(const winrt::Windows::Foundation::IInspectable& sender, const winrt::Windows::UI::Xaml::Input::PointerRoutedEventArgs& args);
+
         void _listItemSelectionChanged(const Windows::Foundation::IInspectable& sender, const Windows::UI::Xaml::Controls::SelectionChangedEventArgs& e);
 
         void _moveBackButtonClicked(const Windows::Foundation::IInspectable& sender, const Windows::UI::Xaml::RoutedEventArgs&);

src/cascadia/TerminalApp/DebugTapConnection.cpp

@@ -60,9 +60,12 @@ namespace winrt::Microsoft::TerminalApp::implementation
 
     DebugTapConnection::DebugTapConnection(ITerminalConnection wrappedConnection)
     {
-        _outputRevoker = wrappedConnection.TerminalOutput(winrt::auto_revoke, { this, &DebugTapConnection::_OutputHandler });
-        _stateChangedRevoker = wrappedConnection.StateChanged(winrt::auto_revoke, [this](auto&& /*s*/, auto&& /*e*/) {
-            StateChanged.raise(*this, nullptr);
+        _outputRevoker = wrappedConnection.TerminalOutput(winrt::auto_revoke, { get_weak(), &DebugTapConnection::_OutputHandler });
+        _stateChangedRevoker = wrappedConnection.StateChanged(winrt::auto_revoke, [weak = get_weak()](auto&& /*s*/, auto&& /*e*/) {
+            if (const auto self = weak.get())
+            {
+                self->StateChanged.raise(*self, nullptr);
+            }
         });
         _wrappedConnection = wrappedConnection;
     }

src/cascadia/TerminalApp/Remoting.cpp

@@ -17,7 +17,7 @@ namespace winrt::TerminalApp::implementation
 {
     CommandlineArgs::CommandlineArgs(winrt::array_view<const winrt::hstring> args, winrt::hstring currentDirectory, uint32_t showWindowCommand, winrt::hstring envString) :
         _args{ args.begin(), args.end() },
-        _cwd{ std::move(currentDirectory) },
+        CurrentDirectory{ std::move(currentDirectory) },
         ShowWindowCommand{ showWindowCommand },
         CurrentEnvironment{ std::move(envString) }
     {

src/cascadia/TerminalApp/Remoting.h

@@ -36,7 +36,6 @@ namespace winrt::TerminalApp::implementation
         ::TerminalApp::AppCommandlineArgs _parsed;
         int32_t _parseResult = 0;
         winrt::com_array<winrt::hstring> _args;
-        winrt::hstring _cwd;
     };
 
     struct RequestReceiveContentArgs : RequestReceiveContentArgsT<RequestReceiveContentArgs>

src/cascadia/TerminalApp/Resources/ja-JP/Resources.resw

@@ -206,7 +206,7 @@
     <value>ウィンドウを閉じる</value>
   </data>
   <data name="SplitTabText" xml:space="preserve">
-    <value>[分割] タブ</value>
+    <value>タブを分割</value>
   </data>
   <data name="SplitPaneText" xml:space="preserve">
     <value>ウィンドウを分割する</value>
@@ -224,7 +224,7 @@
     <value>リセット</value>
   </data>
   <data name="RenameTabText" xml:space="preserve">
-    <value>[名前の変更] タブ</value>
+    <value>タブ名を変更</value>
   </data>
   <data name="DuplicateTabText" xml:space="preserve">
     <value>タブを複製する</value>

src/cascadia/TerminalApp/SuggestionsControl.xaml

@@ -230,6 +230,7 @@
                               VerticalScrollMode="Enabled"
                               Visibility="Visible">
                     <TextBlock x:Name="_descriptionComment"
+                               Margin="0,0,20,0"
                                IsTextSelectionEnabled="True"
                                TextWrapping="WrapWholeWords" />
                 </ScrollViewer>

src/cascadia/TerminalApp/TabBase.cpp

@@ -32,6 +32,7 @@ namespace winrt::TerminalApp::implementation
     {
         ASSERT_UI_THREAD();
 
+        // NOTE: `TerminalPage::_HandleCloseTabRequested` relies on the content being null after this call.
         Content(nullptr);
     }
 

src/cascadia/TerminalApp/TabManagement.cpp

@@ -77,6 +77,16 @@ namespace winrt::TerminalApp::implementation
             }
             const auto settings{ TerminalSettings::CreateWithNewTerminalArgs(_settings, newTerminalArgs, *_bindings) };
 
+            if (profile.Source() == L"Windows.Terminal.InstallPowerShell")
+            {
+                TraceLoggingWrite(
+                    g_hTerminalAppProvider,
+                    "InstallPowerShellStubInvoked",
+                    TraceLoggingDescription("Event emitted when the 'Install Latest PowerShell' stub was invoked"),
+                    TraceLoggingKeyword(MICROSOFT_KEYWORD_MEASURES),
+                    TelemetryPrivacyDataTag(PDT_ProductAndServiceUsage));
+            }
+
             // Try to handle auto-elevation
             if (_maybeElevate(newTerminalArgs, settings, profile))
             {
@@ -158,6 +168,8 @@ namespace winrt::TerminalApp::implementation
         // Set this tab's icon to the icon from the content
         _UpdateTabIcon(*newTabImpl);
 
+        // This is necessary, because WinUI does not have support for middle clicks.
+        // Its Tapped event doesn't provide the information what button was used either.
         tabViewItem.PointerPressed({ this, &TerminalPage::_OnTabPointerPressed });
         tabViewItem.PointerReleased({ this, &TerminalPage::_OnTabPointerReleased });
         tabViewItem.PointerExited({ this, &TerminalPage::_OnTabPointerExited });
@@ -903,19 +915,39 @@ namespace winrt::TerminalApp::implementation
         if (_tabPointerMiddleButtonPressed && !eventArgs.GetCurrentPoint(nullptr).Properties().IsMiddleButtonPressed())
         {
             _tabPointerMiddleButtonPressed = false;
-            if (const auto tabViewItem{ sender.try_as<MUX::Controls::TabViewItem>() })
+            if (auto tabViewItem{ sender.try_as<MUX::Controls::TabViewItem>() })
             {
                 tabViewItem.ReleasePointerCapture(eventArgs.Pointer());
-                auto tab = _GetTabByTabViewItem(tabViewItem);
-                if (!_tabPointerMiddleButtonExited && tab)
+                if (!_tabPointerMiddleButtonExited)
                 {
-                    _HandleCloseTabRequested(tab);
+                    _OnTabPointerReleasedCloseTab(std::move(tabViewItem));
                 }
             }
             eventArgs.Handled(true);
         }
     }
 
+    safe_void_coroutine TerminalPage::_OnTabPointerReleasedCloseTab(winrt::Microsoft::UI::Xaml::Controls::TabViewItem sender)
+    {
+        const auto tab = _GetTabByTabViewItem(sender);
+        if (!tab)
+        {
+            co_return;
+        }
+
+        // WinUI asynchronously updates its tab view items, so it may happen that we're given a
+        // `TabViewItem` that still contains a `TabBase` which has actually already been removed.
+        // First we must yield once, to flush out whatever TabView is currently doing.
+        const auto strong = get_strong();
+        co_await wil::resume_foreground(Dispatcher());
+
+        // `tab.Shutdown()` in `_RemoveTab()` sets the content to null = This checks if the tab is closed.
+        if (tab.Content())
+        {
+            _HandleCloseTabRequested(tab);
+        }
+    }
+
     // Method Description:
     // - Tracking pointer state for tab remove
     // Arguments:

src/cascadia/TerminalApp/TabPaletteItem.cpp

@@ -51,8 +51,10 @@ namespace winrt::TerminalApp::implementation
             _tabStatusChangedRevoker = status.PropertyChanged(winrt::auto_revoke, [weakThis{ get_weak() }](auto& /*sender*/, auto& /*e*/) {
                 // Sometimes nested bindings do not get updated,
                 // thus let's notify property changed on TabStatus when one of its properties changes
-                auto item{ weakThis.get() };
-                item->PropertyChanged.raise(*item, Windows::UI::Xaml::Data::PropertyChangedEventArgs{ L"TabStatus" });
+                if (auto item{ weakThis.get() })
+                {
+                    item->PropertyChanged.raise(*item, Windows::UI::Xaml::Data::PropertyChangedEventArgs{ L"TabStatus" });
+                }
             });
         }
     }

src/cascadia/TerminalApp/TerminalPage.cpp

@@ -62,7 +62,6 @@ namespace winrt::TerminalApp::implementation
     TerminalPage::TerminalPage(TerminalApp::WindowProperties properties, const TerminalApp::ContentManager& manager) :
         _tabs{ winrt::single_threaded_observable_vector<TerminalApp::TabBase>() },
         _mruTabs{ winrt::single_threaded_observable_vector<TerminalApp::TabBase>() },
-        _startupActions{ winrt::single_threaded_vector<ActionAndArgs>() },
         _manager{ manager },
         _hostingHwnd{},
         _WindowProperties{ std::move(properties) }
@@ -297,7 +296,7 @@ namespace winrt::TerminalApp::implementation
         // GH#12267: Don't forget about defterm handoff here. If we're being
         // created for embedding, then _yea_, we don't need to handoff to an
         // elevated window.
-        if (!_startupActions || IsRunningElevated() || _shouldStartInboundListener || _startupActions.Size() == 0)
+        if (_startupActions.empty() || IsRunningElevated() || _shouldStartInboundListener)
         {
             // there aren't startup actions, or we're elevated. In that case, go for it.
             return false;
@@ -375,7 +374,7 @@ namespace winrt::TerminalApp::implementation
     // - <none>
     void TerminalPage::HandoffToElevated(const CascadiaSettings& settings)
     {
-        if (!_startupActions)
+        if (_startupActions.empty())
         {
             return;
         }
@@ -489,7 +488,7 @@ namespace winrt::TerminalApp::implementation
         {
             _startupState = StartupState::InStartup;
 
-            ProcessStartupActions(_startupActions, true);
+            ProcessStartupActions(std::move(_startupActions), true);
 
             // If we were told that the COM server needs to be started to listen for incoming
             // default application connections, start it now.
@@ -546,80 +545,59 @@ namespace winrt::TerminalApp::implementation
     //   nt -d .` from inside another directory to work as expected.
     // Return Value:
     // - <none>
-    safe_void_coroutine TerminalPage::ProcessStartupActions(Windows::Foundation::Collections::IVector<ActionAndArgs> actions,
-                                                            const bool initial,
-                                                            const winrt::hstring cwd,
-                                                            const winrt::hstring env)
+    safe_void_coroutine TerminalPage::ProcessStartupActions(std::vector<ActionAndArgs> actions, const bool initial, const winrt::hstring cwd, const winrt::hstring env)
     {
-        auto weakThis{ get_weak() };
-
-        // Handle it on a subsequent pass of the UI thread.
-        co_await wil::resume_foreground(Dispatcher(), CoreDispatcherPriority::Normal);
+        const auto strong = get_strong();
 
         // If the caller provided a CWD, "switch" to that directory, then switch
-        // back once we're done. This looks weird though, because we have to set
-        // up the scope_exit _first_. We'll release the scope_exit if we don't
-        // actually need it.
-
+        // back once we're done.
         auto originalVirtualCwd{ _WindowProperties.VirtualWorkingDirectory() };
-        auto restoreCwd = wil::scope_exit([&originalVirtualCwd, this]() {
-            // ignore errors, we'll just power on through. We'd rather do
-            // something rather than fail silently if the directory doesn't
-            // actually exist.
-            _WindowProperties.VirtualWorkingDirectory(originalVirtualCwd);
-        });
-
-        // Literally the same thing with env vars too
         auto originalVirtualEnv{ _WindowProperties.VirtualEnvVars() };
-        auto restoreEnv = wil::scope_exit([&originalVirtualEnv, this]() {
-            _WindowProperties.VirtualEnvVars(originalVirtualEnv);
+        auto restoreCwd = wil::scope_exit([&]() {
+            if (!cwd.empty())
+            {
+                // ignore errors, we'll just power on through. We'd rather do
+                // something rather than fail silently if the directory doesn't
+                // actually exist.
+                _WindowProperties.VirtualWorkingDirectory(originalVirtualCwd);
+                _WindowProperties.VirtualEnvVars(originalVirtualEnv);
+            }
         });
-
-        if (cwd.empty())
-        {
-            // We didn't actually need to change the virtual CWD, so we don't
-            // need to restore it
-            restoreCwd.release();
-        }
-        else
+        if (!cwd.empty())
         {
             _WindowProperties.VirtualWorkingDirectory(cwd);
-        }
-
-        if (env.empty())
-        {
-            restoreEnv.release();
-        }
-        else
-        {
             _WindowProperties.VirtualEnvVars(env);
         }
 
-        if (auto page{ weakThis.get() })
+        for (size_t i = 0; i < actions.size(); ++i)
         {
-            for (const auto& action : actions)
+            if (i != 0)
             {
-                if (auto page{ weakThis.get() })
-                {
-                    _actionDispatch->DoAction(action);
-                }
-                else
-                {
-                    co_return;
-                }
+                // Each action may rely on the XAML layout of a preceding action.
+                // Most importantly, this is the case for the combination of NewTab + SplitPane,
+                // as the former appears to only have a layout size after at least 1 resume_foreground,
+                // while the latter relies on that information. This is also why it uses Low priority.
+                //
+                // Curiously, this does not seem to be required when using startupActions, but only when
+                // tearing out a tab (this currently creates a new window with injected startup actions).
+                // This indicates that this is really more of an architectural issue and not a fundamental one.
+                co_await wil::resume_foreground(Dispatcher(), CoreDispatcherPriority::Low);
             }
 
-            // GH#6586: now that we're done processing all startup commands,
-            // focus the active control. This will work as expected for both
-            // commandline invocations and for `wt` action invocations.
-            if (const auto& terminalTab{ _GetFocusedTabImpl() })
+            _actionDispatch->DoAction(actions[i]);
+        }
+
+        // GH#6586: now that we're done processing all startup commands,
+        // focus the active control. This will work as expected for both
+        // commandline invocations and for `wt` action invocations.
+        if (const auto& terminalTab{ _GetFocusedTabImpl() })
+        {
+            if (const auto& content{ terminalTab->GetActiveContent() })
             {
-                if (const auto& content{ terminalTab->GetActiveContent() })
-                {
-                    content.Focus(FocusState::Programmatic);
-                }
+                content.Focus(FocusState::Programmatic);
             }
         }
+
         if (initial)
         {
             _CompleteInitialization();
@@ -1783,16 +1761,22 @@ namespace winrt::TerminalApp::implementation
             auto tab{ weakTab.get() };
             if (page && tab)
             {
-                if (args.PropertyName() == L"Title")
+                const auto propertyName = args.PropertyName();
+                if (propertyName == L"Title")
                 {
                     page->_UpdateTitle(*tab);
                 }
-                else if (args.PropertyName() == L"Content")
+                else if (propertyName == L"Content")
                 {
                     if (*tab == page->_GetFocusedTab())
                     {
-                        page->_tabContent.Children().Clear();
-                        page->_tabContent.Children().Append(tab->Content());
+                        const auto children = page->_tabContent.Children();
+
+                        children.Clear();
+                        if (auto content = tab->Content())
+                        {
+                            page->_tabContent.Children().Append(std::move(content));
+                        }
 
                         tab->Focus(FocusState::Programmatic);
                     }
@@ -1988,6 +1972,12 @@ namespace winrt::TerminalApp::implementation
             actions.insert(actions.end(), std::make_move_iterator(tabActions.begin()), std::make_move_iterator(tabActions.end()));
         }
 
+        // Avoid persisting a window with zero tabs, because `BuildStartupActions` happened to return an empty vector.
+        if (actions.empty())
+        {
+            return;
+        }
+
         // if the focused tab was not the last tab, restore that
         auto idx = _GetFocusedTabIndex();
         if (idx && idx != tabCount - 1)
@@ -3658,13 +3648,9 @@ namespace winrt::TerminalApp::implementation
     // - actions: a list of Actions to process on startup.
     // Return Value:
     // - <none>
-    void TerminalPage::SetStartupActions(std::vector<ActionAndArgs>& actions)
+    void TerminalPage::SetStartupActions(std::vector<ActionAndArgs> actions)
     {
-        // The fastest way to copy all the actions out of the std::vector and
-        // put them into a winrt::IVector is by making a copy, then moving the
-        // copy into the winrt vector ctor.
-        auto listCopy = actions;
-        _startupActions = winrt::single_threaded_vector<ActionAndArgs>(std::move(listCopy));
+        _startupActions = std::move(actions);
     }
 
     // Routine Description:

src/cascadia/TerminalApp/TerminalPage.h

@@ -128,7 +128,7 @@ namespace winrt::TerminalApp::implementation
         void Maximized(bool newMaximized);
         void RequestSetMaximized(bool newMaximized);
 
-        void SetStartupActions(std::vector<Microsoft::Terminal::Settings::Model::ActionAndArgs>& actions);
+        void SetStartupActions(std::vector<Microsoft::Terminal::Settings::Model::ActionAndArgs> actions);
 
         void SetInboundListener(bool isEmbedding);
         static std::vector<Microsoft::Terminal::Settings::Model::ActionAndArgs> ConvertExecuteCommandlineToActions(const Microsoft::Terminal::Settings::Model::ExecuteCommandlineArgs& args);
@@ -146,7 +146,7 @@ namespace winrt::TerminalApp::implementation
         void ActionSaveFailed(winrt::hstring message);
         void ShowTerminalWorkingDirectory();
 
-        safe_void_coroutine ProcessStartupActions(Windows::Foundation::Collections::IVector<Microsoft::Terminal::Settings::Model::ActionAndArgs> actions,
+        safe_void_coroutine ProcessStartupActions(std::vector<Microsoft::Terminal::Settings::Model::ActionAndArgs> actions,
                                                   const bool initial,
                                                   const winrt::hstring cwd = winrt::hstring{},
                                                   const winrt::hstring env = winrt::hstring{});
@@ -255,7 +255,7 @@ namespace winrt::TerminalApp::implementation
         winrt::Windows::UI::Xaml::Controls::Grid::LayoutUpdated_revoker _layoutUpdatedRevoker;
         StartupState _startupState{ StartupState::NotInitialized };
 
-        Windows::Foundation::Collections::IVector<Microsoft::Terminal::Settings::Model::ActionAndArgs> _startupActions;
+        std::vector<Microsoft::Terminal::Settings::Model::ActionAndArgs> _startupActions;
         bool _shouldStartInboundListener{ false };
         bool _isEmbeddingInboundListener{ false };
 
@@ -433,6 +433,7 @@ namespace winrt::TerminalApp::implementation
         bool _tabPointerMiddleButtonExited{ false };
         void _OnTabPointerPressed(const IInspectable& sender, const Windows::UI::Xaml::Input::PointerRoutedEventArgs& eventArgs);
         void _OnTabPointerReleased(const IInspectable& sender, const Windows::UI::Xaml::Input::PointerRoutedEventArgs& eventArgs);
+        safe_void_coroutine _OnTabPointerReleasedCloseTab(winrt::Microsoft::UI::Xaml::Controls::TabViewItem sender);
         void _OnTabPointerEntered(const IInspectable& sender, const Windows::UI::Xaml::Input::PointerRoutedEventArgs& eventArgs);
         void _OnTabPointerExited(const IInspectable& sender, const Windows::UI::Xaml::Input::PointerRoutedEventArgs& eventArgs);
 

src/cascadia/TerminalApp/TerminalTab.cpp

@@ -851,6 +851,9 @@ namespace winrt::TerminalApp::implementation
     {
         ASSERT_UI_THREAD();
 
+        // Don't forget to call the overridden function. :)
+        TabBase::Shutdown();
+
         if (_rootPane)
         {
             _rootPane->Shutdown();

src/cascadia/TerminalApp/TerminalWindow.cpp

@@ -144,7 +144,6 @@ namespace winrt::TerminalApp::implementation
     {
         // Now that we know we can do XAML, build our page.
         _root = winrt::make_self<TerminalPage>(*_WindowProperties, _manager);
-        _dialog = ContentDialog{};
 
         // Pass in information about the initial state of the window.
         // * If we were supposed to start from serialized "content", do that,
@@ -313,6 +312,15 @@ namespace winrt::TerminalApp::implementation
     {
         return _settings.GlobalSettings().CurrentTheme();
     }
+
+    // WinUI can't show 2 dialogs simultaneously. Yes, really. If you do, you get an exception.
+    // As such, we must dismiss whatever dialog is currently being shown.
+    //
+    // This limit is of course per-thread and not per-window. Yes... really. See:
+    //   https://github.com/microsoft/microsoft-ui-xaml/issues/794
+    // The consequence is that we use a static variable to keep track of the shown dialog.
+    static ContentDialog s_activeDialog{ nullptr };
+
     // Method Description:
     // - Show a ContentDialog with buttons to take further action. Uses the
     //   FrameworkElements provided as the title and content of this dialog, and
@@ -328,16 +336,32 @@ namespace winrt::TerminalApp::implementation
     // - an IAsyncOperation with the dialog result
     winrt::Windows::Foundation::IAsyncOperation<ContentDialogResult> TerminalWindow::ShowDialog(winrt::WUX::Controls::ContentDialog dialog)
     {
-        // DON'T release this lock in a wil::scope_exit. The scope_exit will get
-        // called when we await, which is not what we want.
-        std::unique_lock lock{ _dialogLock, std::try_to_lock };
-        if (!lock)
+        // As mentioned on s_activeDialog, dismissing the active dialog is necessary.
+        // We repeat it a few times in case the resume_foreground failed to work,
+        // but I found that one iteration will always be enough in practice.
+        for (int i = 0; i < 3; ++i)
+        {
+            if (!s_activeDialog)
+            {
+                break;
+            }
+
+            s_activeDialog.Hide();
+
+            // Wait for the current dialog to be hidden.
+            co_await wil::resume_foreground(_root->Dispatcher(), CoreDispatcherPriority::Low);
+        }
+
+        // If two sources call ShowDialog() simultaneously, it may happen that both enter the above loop,
+        // but it's crucial that only one of them continues below as only 1 dialog can be shown at a time.
+        // Thankfully, everything runs on the UI thread, so only 1 caller will exit the above loop at a time.
+        // So, if s_activeDialog is still set at this point, we must have lost the race.
+        if (s_activeDialog)
         {
-            // Another dialog is visible.
             co_return ContentDialogResult::None;
         }
 
-        _dialog = dialog;
+        s_activeDialog = dialog;
 
         // IMPORTANT: This is necessary as documented in the ContentDialog MSDN docs.
         // Since we're hosting the dialog in a Xaml island, we need to connect it to the
@@ -367,23 +391,26 @@ namespace winrt::TerminalApp::implementation
             }
         } };
 
-        themingLambda(dialog, nullptr); // if it's already in the tree
-        auto loadedRevoker{ dialog.Loaded(winrt::auto_revoke, themingLambda) }; // if it's not yet in the tree
+        auto result = ContentDialogResult::None;
 
-        // Display the dialog.
-        co_return co_await dialog.ShowAsync(Controls::ContentDialogPlacement::Popup);
+        // Extra scope to drop the revoker before resetting the s_activeDialog to null.
+        {
+            themingLambda(dialog, nullptr); // if it's already in the tree
+            auto loadedRevoker{ dialog.Loaded(winrt::auto_revoke, themingLambda) }; // if it's not yet in the tree
+            result = co_await dialog.ShowAsync(Controls::ContentDialogPlacement::Popup);
+        }
 
-        // After the dialog is dismissed, the dialog lock (held by `lock`) will
-        // be released so another can be shown
+        s_activeDialog = nullptr;
+        co_return result;
     }
 
     // Method Description:
     // - Dismiss the (only) visible ContentDialog
     void TerminalWindow::DismissDialog()
     {
-        if (auto localDialog = std::exchange(_dialog, nullptr))
+        if (s_activeDialog)
         {
-            localDialog.Hide();
+            s_activeDialog.Hide();
         }
     }
 
@@ -1054,12 +1081,8 @@ namespace winrt::TerminalApp::implementation
     {
         _contentBounds = bounds;
 
-        const auto& args = _contentStringToActions(content, true);
-
-        for (const auto& action : args)
-        {
-            _initialContentArgs.push_back(action);
-        }
+        const auto args = _contentStringToActions(content, true);
+        _initialContentArgs = wil::to_vector(args);
     }
 
     // Method Description:
@@ -1085,7 +1108,7 @@ namespace winrt::TerminalApp::implementation
         if (_appArgs->ExitCode() == 0)
         {
             auto& parsedArgs = _appArgs->ParsedArgs();
-            auto actions = winrt::single_threaded_vector<ActionAndArgs>(std::move(parsedArgs.GetStartupActions()));
+            auto& actions = parsedArgs.GetStartupActions();
 
             _root->ProcessStartupActions(actions, false, _appArgs->CurrentDirectory(), _appArgs->CurrentEnvironment());
 
@@ -1200,7 +1223,7 @@ namespace winrt::TerminalApp::implementation
     {
         try
         {
-            const auto& args = ActionAndArgs::Deserialize(content);
+            const auto args = ActionAndArgs::Deserialize(content);
             if (args == nullptr ||
                 args.Size() == 0)
             {
@@ -1244,9 +1267,9 @@ namespace winrt::TerminalApp::implementation
 
             const bool replaceFirstWithNewTab = tabIndex >= _root->NumberOfTabs();
 
-            const auto& args = _contentStringToActions(content, replaceFirstWithNewTab);
+            auto args = _contentStringToActions(content, replaceFirstWithNewTab);
 
-            _root->AttachContent(args, tabIndex);
+            _root->AttachContent(std::move(args), tabIndex);
         }
     }
     void TerminalWindow::SendContentToOther(winrt::TerminalApp::RequestReceiveContentArgs args)

src/cascadia/TerminalApp/TerminalWindow.h

@@ -167,8 +167,6 @@ namespace winrt::TerminalApp::implementation
         // ALSO: If you add any UIElements as roots here, make sure they're
         // updated in _ApplyTheme. The root currently is _root.
         winrt::com_ptr<TerminalPage> _root{ nullptr };
-        winrt::Windows::UI::Xaml::Controls::ContentDialog _dialog{ nullptr };
-        std::shared_mutex _dialogLock;
 
         wil::com_ptr<CommandlineArgs> _appArgs{ nullptr };
         bool _hasCommandLineArguments{ false };

src/cascadia/TerminalApp/pch.h

@@ -27,6 +27,7 @@
 
 #include <winrt/Windows.ApplicationModel.h>
 #include <winrt/Windows.ApplicationModel.DataTransfer.h>
+#include <winrt/Windows.ApplicationModel.Resources.Core.h>
 #include <winrt/Windows.Foundation.h>
 #include <winrt/Windows.Foundation.Collections.h>
 #include <winrt/Windows.Foundation.Metadata.h>

src/cascadia/TerminalConnection/CTerminalHandoff.cpp

@@ -14,6 +14,13 @@ static DWORD g_cTerminalHandoffRegistration = 0;
 // Mutex so we only do start/stop/establish one at a time.
 static std::shared_mutex _mtx;
 
+// This is the callback that will be called when a connection is received.
+// Call this once during startup and don't ever change it again (race condition).
+void CTerminalHandoff::s_setCallback(NewHandoffFunction callback) noexcept
+{
+    _pfnHandoff = callback;
+}
+
 // Routine Description:
 // - Starts listening for TerminalHandoff requests by registering
 //   our class and interface with COM.
@@ -21,24 +28,19 @@ static std::shared_mutex _mtx;
 // - pfnHandoff - Function to callback when a handoff is received
 // Return Value:
 // - S_OK, E_NOT_VALID_STATE (start called when already started) or relevant COM registration error.
-HRESULT CTerminalHandoff::s_StartListening(NewHandoffFunction pfnHandoff)
+HRESULT CTerminalHandoff::s_StartListening()
 try
 {
     std::unique_lock lock{ _mtx };
 
-    RETURN_HR_IF(E_NOT_VALID_STATE, _pfnHandoff != nullptr);
-
     const auto classFactory = Make<SimpleClassFactory<CTerminalHandoff>>();
-
-    RETURN_IF_NULL_ALLOC(classFactory);
+    RETURN_LAST_ERROR_IF_NULL(classFactory);
 
     ComPtr<IUnknown> unk;
     RETURN_IF_FAILED(classFactory.As(&unk));
 
     RETURN_IF_FAILED(CoRegisterClassObject(__uuidof(CTerminalHandoff), unk.Get(), CLSCTX_LOCAL_SERVER, REGCLS_SINGLEUSE, &g_cTerminalHandoffRegistration));
 
-    _pfnHandoff = pfnHandoff;
-
     return S_OK;
 }
 CATCH_RETURN()
@@ -53,15 +55,6 @@ CATCH_RETURN()
 HRESULT CTerminalHandoff::s_StopListening()
 {
     std::unique_lock lock{ _mtx };
-    return s_StopListeningLocked();
-}
-
-// See s_StopListening()
-HRESULT CTerminalHandoff::s_StopListeningLocked()
-{
-    RETURN_HR_IF_NULL(E_NOT_VALID_STATE, _pfnHandoff);
-
-    _pfnHandoff = nullptr;
 
     if (g_cTerminalHandoffRegistration)
     {
@@ -92,22 +85,15 @@ HRESULT CTerminalHandoff::EstablishPtyHandoff(HANDLE* in, HANDLE* out, HANDLE si
 {
     try
     {
-        std::unique_lock lock{ _mtx };
-
-        // s_StopListeningLocked sets _pfnHandoff to nullptr.
-        // localPfnHandoff is tested for nullness below.
-#pragma warning(suppress : 26429) // Symbol '...' is never tested for nullness, it can be marked as not_null (f.23).
-        auto localPfnHandoff = _pfnHandoff;
-
         // Because we are REGCLS_SINGLEUSE... we need to `CoRevokeClassObject` after we handle this ONE call.
         // COM does not automatically clean that up for us. We must do it.
-        LOG_IF_FAILED(s_StopListeningLocked());
+        LOG_IF_FAILED(s_StopListening());
 
         // Report an error if no one registered a handoff function before calling this.
-        THROW_HR_IF_NULL(E_NOT_VALID_STATE, localPfnHandoff);
+        THROW_HR_IF_NULL(E_NOT_VALID_STATE, _pfnHandoff);
 
         // Call registered handler from when we started listening.
-        THROW_IF_FAILED(localPfnHandoff(in, out, signal, reference, server, client, startupInfo));
+        THROW_IF_FAILED(_pfnHandoff(in, out, signal, reference, server, client, startupInfo));
 
 #pragma warning(suppress : 26477)
         TraceLoggingWrite(

src/cascadia/TerminalConnection/CTerminalHandoff.h

@@ -38,11 +38,11 @@ struct __declspec(uuid(__CLSID_CTerminalHandoff))
 
 #pragma endregion
 
-    static HRESULT s_StartListening(NewHandoffFunction pfnHandoff);
-    static HRESULT s_StopListening();
+    static void s_setCallback(NewHandoffFunction callback) noexcept;
+    static HRESULT s_StartListening();
 
 private:
-    static HRESULT s_StopListeningLocked();
+    static HRESULT s_StopListening();
 };
 
 // Disable warnings from the CoCreatableClass macro as the value it provides for

src/cascadia/TerminalConnection/ConptyConnection.cpp

@@ -428,6 +428,20 @@ namespace winrt::Microsoft::Terminal::TerminalConnection::implementation
             TerminalOutput.raise(L"\r\n");
             TerminalOutput.raise(badPathText);
         }
+        // If the requested action requires elevation, display appropriate message
+        else if (hr == HRESULT_FROM_WIN32(ERROR_ELEVATION_REQUIRED))
+        {
+            const auto elevationText = RS_(L"ElevationRequired");
+            TerminalOutput.raise(L"\r\n");
+            TerminalOutput.raise(elevationText);
+        }
+        // If the requested executable was not found, display appropriate message
+        else if (hr == HRESULT_FROM_WIN32(ERROR_FILE_NOT_FOUND))
+        {
+            const auto fileNotFoundText = RS_(L"FileNotFound");
+            TerminalOutput.raise(L"\r\n");
+            TerminalOutput.raise(fileNotFoundText);
+        }
 
         _transitionToState(ConnectionState::Failed);
 
@@ -780,12 +794,12 @@ namespace winrt::Microsoft::Terminal::TerminalConnection::implementation
 
     void ConptyConnection::StartInboundListener()
     {
-        THROW_IF_FAILED(CTerminalHandoff::s_StartListening(&ConptyConnection::NewHandoff));
-    }
+        static const auto init = []() noexcept {
+            CTerminalHandoff::s_setCallback(&ConptyConnection::NewHandoff);
+            return true;
+        }();
 
-    void ConptyConnection::StopInboundListener()
-    {
-        THROW_IF_FAILED(CTerminalHandoff::s_StopListening());
+        CTerminalHandoff::s_StartListening();
     }
 
     // Function Description:

src/cascadia/TerminalConnection/ConptyConnection.h

@@ -36,7 +36,6 @@ namespace winrt::Microsoft::Terminal::TerminalConnection::implementation
         WORD ShowWindow() const noexcept;
 
         static void StartInboundListener();
-        static void StopInboundListener();
 
         static winrt::event_token NewConnection(const NewConnectionHandler& handler);
         static void NewConnection(const winrt::event_token& token);

src/cascadia/TerminalConnection/ConptyConnection.idl

@@ -23,7 +23,6 @@ namespace Microsoft.Terminal.TerminalConnection
 
         static event NewConnectionHandler NewConnection;
         static void StartInboundListener();
-        static void StopInboundListener();
 
         static Windows.Foundation.Collections.ValueSet CreateSettings(String cmdline,
                                                                       String startingDirectory,

src/cascadia/TerminalConnection/Resources/de-DE/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>Sie können dieses Terminal jetzt mit STRG+D schließen oder zum Neustart die EINGABETASTE drücken.</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[Fehler {0} beim Start von `{1}']</value>
@@ -220,4 +220,10 @@
     <value>Auf das Startverzeichnis „{0}“ konnte nicht zugegriffen werden</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>Für den angeforderten Vorgang sind erhöhte Rechte erforderlich.</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>Die angegebene Datei wurde nicht gefunden.</value>
+  </data>
 </root>

src/cascadia/TerminalConnection/Resources/en-US/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>You can now close this terminal with Ctrl+D, or press Enter to restart.</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[error {0} when launching `{1}']</value>
@@ -220,4 +220,10 @@
     <value>Could not access starting directory "{0}"</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
-</root>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>The requested operation requires elevation.</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>The system cannot find the file specified.</value>
+  </data>
+</root>

src/cascadia/TerminalConnection/Resources/es-ES/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>Ahora puede cerrar este terminal con Ctrl+D o presionar Entrar para reiniciar.</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[error {0} al iniciar `{1}']</value>
@@ -220,4 +220,10 @@
     <value>No se pudo obtener acceso al directorio inicial «{0}»</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>La operación solicitada requiere elevación.</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>El sistema no puede encontrar el archivo especificado.</value>
+  </data>
 </root>

src/cascadia/TerminalConnection/Resources/fr-FR/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>Vous pouvez maintenant fermer ce terminal avec Ctrl+D, ou appuyez sur Entrée pour redémarrer.</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[erreur {0} lors du lancement de `{1}']</value>
@@ -220,4 +220,10 @@
     <value>Le démarrage du répertoire n’est pas accessible «{0}»</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>L’opération demandée nécessite une élévation.</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>Le fichier spécifié est introuvable.</value>
+  </data>
 </root>

src/cascadia/TerminalConnection/Resources/it-IT/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>È ora possibile chiudere il terminale con CTRL+D oppure premere INVIO per riavviarlo.</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[errore {0} durante l'avvio di `{1}']</value>
@@ -220,4 +220,10 @@
     <value>Non è possibile accedere alla directory di avvio "{0}"</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>Per l'operazione richiesta è necessaria l'elevazione dei privilegi.</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>Impossibile trovare il file specificato.</value>
+  </data>
 </root>

src/cascadia/TerminalConnection/Resources/ja-JP/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>このターミナルを Ctrl+D で閉じるか、Enter キーを押して再起動できます。</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>['{1}' の起動時にエラー {0} が発生しました]</value>
@@ -220,4 +220,10 @@
     <value>先頭のディレクトリ "{0}" にアクセスできませんでした</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>要求された操作には、権限の昇格が必要です。</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>指定されたファイルが見つかりません。</value>
+  </data>
 </root>

src/cascadia/TerminalConnection/Resources/ko-KR/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>이제 Ctrl+D 이 터미널을 닫거나 Enter 키를 눌러 다시 시작할 수 있습니다.</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[’{1}' 시작 시 {0} 오류 발생]</value>
@@ -220,4 +220,10 @@
     <value>시작 디렉터리 "{0}"에 액세스할 수 없습니다.</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>요청한 작업을 수행하려면 권한 상승이 필요합니다.</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>시스템에서 지정된 파일을 찾을 수 없습니다.</value>
+  </data>
 </root>

src/cascadia/TerminalConnection/Resources/pt-BR/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>Agora você pode fechar este terminal com Ctrl+D ou pressione Enter para reiniciar.</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[erro {0} ao iniciar "{1}"]</value>
@@ -220,4 +220,10 @@
     <value>Não foi possível acessar o diretório inicial "{0}"</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>A operação solicitada exige elevação.</value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>O sistema não pode encontrar o arquivo especificado.</value>
+  </data>
 </root>

src/cascadia/TerminalConnection/Resources/qps-ploc/Resources.resw

@@ -209,7 +209,7 @@
   </data>
   <data name="CtrlDToClose" xml:space="preserve">
     <value>Ỳóŭ ćǻή иòω сĺøѕè ťнįş тёѓмîήªŀ ωīťђ Çťѓℓ+Ď, όг ргéšѕ Σñтèř το ґèšтªят. !!! !!! !!! !!! !!! !!! !!!</value>
-	  <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
+    <comment>"Ctrl+D" and "Enter" represent keys the user will press (control+D and Enter).</comment>
   </data>
   <data name="ProcessFailedToLaunch" xml:space="preserve">
     <value>[℮ѓѓŏŕ {0} ωĥєй łåύñćђίηğ `{1}'] !!! !!! !!! </value>
@@ -220,4 +220,10 @@
     <value>Ċőŭľđ йōť ª¢čеѕş şτāŗťΐиğ ðιѓεςтоŗγ "{0}" !!! !!! !!! !!!</value>
     <comment>The first argument {0} is a path to a directory on the filesystem, as provided by the user.</comment>
   </data>
-</root>
+  <data name="ElevationRequired" xml:space="preserve">
+    <value>Ţнė ŗēqμĕѕŧєđ ôφ℮ґάтĩöй ŕєqΰїŗęś ėĺęνáτîøŋ. !!! !!! !!! !!! </value>
+  </data>
+  <data name="FileNotFound" xml:space="preserve">
+    <value>Ŧнё şγśţêм ςâлηόť ƒїлď ŧнэ ƒΐĺë śрéćιƒієð. !!! !!! !!! !!! </value>
+  </data>
+</root>