Update CommandPalette.cpp to ignore _filterTextChanged on TabSwitchMode (#16858)

As mentioned in #11146, when the "Next/Prev" command is executed from
the command line with a string in the search bar, this is setting always
the first tab.

When using the command "Next/Previous Tab" from the command line, we are
creating another tab (as if we are using the keyboard shortcut), and
this triggers the `_filterTextChanged` that resets the index to the
first item in because the current mode that it has.

This could be cause because, It seems that it detects as if we are
deleting the entered letter or creating an empty string, causing the
execution of the mentioned method and resetting its index to 0.

To avoid this, we are making sure that when this action is triggerd and
we are in the `TabSwitchMode`, we should ignore the following execution
of the method.

## Validation Steps Performed
I tested out the following scenarios:
1. Performing the action with the keyboard shorcut
2. Perfoming the action with an empty string
3. Performing the action with a string in the search bar.

Also validated with the current tests.

Closes #11146

(cherry picked from commit 806d5e2d05)
Service-Card-Id: 92139799
Service-Version: 1.19

.github/actions/spelling/allow/allow.txt

@@ -1,3 +1,4 @@
+aci
 admins
 allcolors
 Apc
@@ -8,11 +9,14 @@ breadcrumbs
 bsd
 calt
 ccmp
+ccon
 changelog
 clickable
 clig
 CMMI
+consvc
 copyable
+Counterintuitively
 CtrlDToClose
 cybersecurity
 dalet
@@ -90,6 +94,7 @@ reserialize
 reserializes
 rlig
 runtimes
+servicebus
 shcha
 slnt
 Sos
@@ -115,6 +120,7 @@ vsdevcmd
 walkthrough
 walkthroughs
 We'd
+westus
 wildcards
 XBox
 YBox

.github/actions/spelling/allow/apis.txt

@@ -28,6 +28,7 @@ CYICON
 Dacl
 dataobject
 dcomp
+debugbreak
 delayimp
 DERR
 dlldata
@@ -219,16 +220,19 @@ UFIELD
 ULARGE
 UOI
 UPDATEINIFILE
+urlmon
 userenv
 USEROBJECTFLAGS
 Vcpp
 Viewbox
 virtualalloc
 vsnwprintf
+wcsnlen
 wcsstr
 wcstoui
 WDJ
 winhttp
+wininet
 winmain
 winsta
 winstamin

.github/actions/spelling/allow/microsoft.txt

@@ -4,6 +4,7 @@ advapi
 altform
 altforms
 appendwttlogging
+appinstaller
 appx
 appxbundle
 appxerror
@@ -59,12 +60,13 @@ PRIINFO
 propkey
 pscustomobject
 QWORD
+rdpclip
 regedit
 resfiles
 robocopy
 SACLs
-segoe
 sdkddkver
+segoe
 Shobjidl
 sid
 Skype

.github/actions/spelling/expect/expect.txt

@@ -77,6 +77,7 @@ aumid
 Authenticode
 AUTOBUDDY
 AUTOCHECKBOX
+autocrlf
 autohide
 AUTOHSCROLL
 automagically
@@ -188,8 +189,10 @@ changelist
 chaof
 charinfo
 CHARSETINFO
+chcbpat
 chh
 chk
+chshdng
 CHT
 Cic
 cielab
@@ -301,6 +304,7 @@ coordnew
 COPYCOLOR
 CORESYSTEM
 cotaskmem
+countof
 CPG
 cpinfo
 CPINFOEX
@@ -310,7 +314,6 @@ CPPCORECHECK
 cppcorecheckrules
 cpprestsdk
 cppwinrt
-CProc
 cpx
 CREATESCREENBUFFER
 CREATESTRUCT
@@ -462,6 +465,7 @@ DECSLPP
 DECSLRM
 DECSMKR
 DECSR
+DECST
 DECSTBM
 DECSTGLT
 DECSTR
@@ -500,6 +504,7 @@ directio
 DIRECTX
 DISABLEDELAYEDEXPANSION
 DISABLENOSCROLL
+DISPATCHNOTIFY
 DISPLAYATTRIBUTE
 DISPLAYATTRIBUTEPROPERTY
 DISPLAYCHANGE
@@ -565,7 +570,6 @@ Edgium
 EDITKEYS
 EDITTEXT
 EDITUPDATE
-edputil
 Efast
 efghijklmn
 EHsc
@@ -576,6 +580,7 @@ elems
 emacs
 EMPTYBOX
 enabledelayedexpansion
+ENDCAP
 endptr
 endregion
 ENTIREBUFFER
@@ -602,7 +607,6 @@ EXETYPE
 exeuwp
 exewin
 exitwin
-expectedinput
 EXPUNGECOMMANDHISTORY
 EXSTYLE
 EXTENDEDEDITKEY
@@ -749,7 +753,6 @@ gfx
 GGI
 GHIJK
 GHIJKL
-GHIJKLM
 gitfilters
 gitmodules
 gle
@@ -825,7 +828,7 @@ hostlib
 HPA
 hpcon
 HPCON
-hpj
+hpen
 HPR
 HProvider
 HREDRAW
@@ -1000,7 +1003,6 @@ listptrsize
 lld
 llx
 LMENU
-LMNOP
 lnk
 lnkd
 lnkfile
@@ -1010,6 +1012,7 @@ LOBYTE
 localappdata
 locsrc
 Loewen
+LOGBRUSH
 LOGFONT
 LOGFONTA
 LOGFONTW
@@ -1017,7 +1020,6 @@ logissue
 losslessly
 loword
 lparam
-LPCCH
 lpch
 LPCPLINFO
 LPCREATESTRUCT
@@ -1216,14 +1218,12 @@ NOMOVE
 NONALERT
 nonbreaking
 nonclient
-NONCONST
 NONINFRINGEMENT
 NONPREROTATED
 nonspace
 NOOWNERZORDER
 Nop
 NOPAINT
-NOPQRST
 noprofile
 NOREDRAW
 NOREMOVE
@@ -1498,7 +1498,6 @@ pwsz
 pythonw
 Qaabbcc
 qos
-QRSTU
 QUERYOPEN
 QUESTIONMARK
 quickedit
@@ -1579,7 +1578,6 @@ rgbs
 rgci
 rgfae
 rgfte
-rgi
 rgn
 rgp
 rgpwsz
@@ -1748,7 +1746,6 @@ SOLIDBOX
 Solutiondir
 somefile
 sourced
-spammy
 SRCCODEPAGE
 SRCCOPY
 SRCINVERT
@@ -1777,6 +1774,7 @@ stdafx
 STDAPI
 stdc
 stdcpp
+STDEXT
 STDMETHODCALLTYPE
 STDMETHODIMP
 STGM
@@ -1861,7 +1859,6 @@ testname
 TESTNULL
 testpass
 testpasses
-testtimeout
 TEXCOORD
 texel
 TExpected
@@ -1908,9 +1905,9 @@ touchpad
 Tpp
 Tpqrst
 tprivapi
+tput
 tracelog
 tracelogging
-traceloggingprovider
 traceviewpp
 trackbar
 TRACKCOMPOSITION
@@ -2003,7 +2000,6 @@ USEFILLATTRIBUTE
 USEGLYPHCHARS
 USEHICON
 USEPOSITION
-userbase
 USERDATA
 userdpiapi
 Userp
@@ -2018,7 +2014,6 @@ utext
 UText
 UTEXT
 utr
-UVWX
 UVWXY
 UVWXYZ
 uwa
@@ -2047,8 +2042,6 @@ VKKEYSCAN
 VMs
 VPA
 VPR
-VProc
-VRaw
 VREDRAW
 vsc
 vsconfig
@@ -2077,7 +2070,6 @@ VTRGBTo
 vtseq
 vtterm
 vttest
-VWX
 waitable
 WANSUNG
 WANTARROWS
@@ -2091,7 +2083,6 @@ WCIA
 WCIW
 WCSHELPER
 wcsicmp
-wcsnicmp
 wcsrev
 wddm
 wddmcon
@@ -2273,6 +2264,7 @@ YCast
 YCENTER
 YCount
 YDPI
+YLimit
 YOffset
 YSubstantial
 YVIRTUALSCREEN

OpenConsole.sln

@@ -239,8 +239,6 @@ Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Shared", "Shared", "{89CDCC
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Types.Unit.Tests", "src\types\ut_types\Types.Unit.Tests.vcxproj", "{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}"
 EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "PublicTerminalCore", "src\cascadia\PublicTerminalCore\PublicTerminalCore.vcxproj", "{84848BFA-931D-42CE-9ADF-01EE54DE7890}"
-EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "WpfTerminalControl", "src\cascadia\WpfTerminalControl\WpfTerminalControl.csproj", "{376FE273-6B84-4EB5-8B30-8DE9D21B022C}"
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "UnitTests_TerminalApp", "src\cascadia\ut_app\TerminalApp.UnitTests.vcxproj", "{CA5CAD1A-9333-4D05-B12A-1905CBF112F9}"
@@ -334,7 +332,7 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "fmt", "src\dep\fmt\fmt.vcxp
 EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "WpfTerminalTestNetCore", "src\cascadia\WpfTerminalTestNetCore\WpfTerminalTestNetCore.csproj", "{1588FD7C-241E-4E7D-9113-43735F3E6BAD}"
 	ProjectSection(ProjectDependencies) = postProject
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890} = {84848BFA-931D-42CE-9ADF-01EE54DE7890}
+		{CA5CAD1A-F542-4635-A069-7CAEFB930070} = {CA5CAD1A-F542-4635-A069-7CAEFB930070}
 		{A22EC5F6-7851-4B88-AC52-47249D437A52} = {A22EC5F6-7851-4B88-AC52-47249D437A52}
 	EndProjectSection
 EndProject
@@ -1711,34 +1709,6 @@ Global
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}.Release|x64.Build.0 = Release|x64
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}.Release|x86.ActiveCfg = Release|Win32
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}.Release|x86.Build.0 = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|ARM.ActiveCfg = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x64.Build.0 = AuditMode|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|Any CPU.ActiveCfg = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|ARM.ActiveCfg = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|ARM64.Build.0 = Debug|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x64.ActiveCfg = Debug|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x64.Build.0 = Debug|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x86.ActiveCfg = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x86.Build.0 = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|ARM.ActiveCfg = Fuzzing|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|Any CPU.ActiveCfg = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|ARM.ActiveCfg = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|ARM64.ActiveCfg = Release|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|ARM64.Build.0 = Release|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x64.ActiveCfg = Release|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x64.Build.0 = Release|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x86.ActiveCfg = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x86.Build.0 = Release|Win32
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C}.AuditMode|Any CPU.ActiveCfg = Release|Any CPU
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C}.AuditMode|ARM.ActiveCfg = Debug|Any CPU
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C}.AuditMode|ARM.Build.0 = Debug|Any CPU
@@ -2894,7 +2864,6 @@ Global
 		{05500DEF-2294-41E3-AF9A-24E580B82836} = {89CDCC5C-9F53-4054-97A4-639D99F169CD}
 		{1E4A062E-293B-4817-B20D-BF16B979E350} = {89CDCC5C-9F53-4054-97A4-639D99F169CD}
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73} = {89CDCC5C-9F53-4054-97A4-639D99F169CD}
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890} = {4DAF0299-495E-4CD1-A982-9BAC16A45932}
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C} = {4DAF0299-495E-4CD1-A982-9BAC16A45932}
 		{CA5CAD1A-9333-4D05-B12A-1905CBF112F9} = {BDB237B6-1D1D-400F-84CC-40A58FA59C8E}
 		{CA5CAD1A-9A12-429C-B551-8562EC954746} = {59840756-302F-44DF-AA47-441A9D673202}

build/config/esrp.build.batch.wpf.json

@@ -1,7 +1,7 @@
 [
     {
         "MatchedPath": [
-            "PublicTerminalCore.dll"
+            "Microsoft.Terminal.Control/Microsoft.Terminal.Control.dll"
         ],
         "SigningInfo": {
             "Operations": [

build/config/template.appinstaller

@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<AppInstaller
+  xmlns="http://schemas.microsoft.com/appx/appinstaller/2017/2"
+  Version="1.0.0.0"
+  Uri="$$ROOT$$$$NAME$$.appinstaller">
+
+  <MainBundle
+    Name="$$NAME$$"
+    Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+    Version="$$VERSION$$"
+    Uri="$$ROOT$$$$PACKAGE$$" />
+
+  <Dependencies>
+    <Package
+      Name="Microsoft.UI.Xaml.2.8"
+      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+      Version="8.2305.5001.0"
+      ProcessorArchitecture="x64"
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x64.appx" />
+    <Package
+      Name="Microsoft.UI.Xaml.2.8"
+      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+      Version="8.2305.5001.0"
+      ProcessorArchitecture="x86"
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x86.appx" />
+    <Package
+      Name="Microsoft.UI.Xaml.2.8"
+      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+      Version="8.2305.5001.0"
+      ProcessorArchitecture="arm64"
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.arm64.appx" />
+  </Dependencies>
+
+  <UpdateSettings>
+    <OnLaunch
+      HoursBetweenUpdateChecks="6" />
+  </UpdateSettings>
+</AppInstaller>

build/config/tsa.json

@@ -0,0 +1,6 @@
+{
+    "instanceUrl": "https://microsoft.visualstudio.com",
+    "projectName": "OS",
+    "areaPath": "OS\\Windows Client and Services\\ADEPT\\E4D-Engineered for Developers\\SHINE\\Terminal",
+    "notificationAliases": ["condev@microsoft.com", "duhowett@microsoft.com"]
+}

build/pgo/Terminal.PGO.props

@@ -9,7 +9,7 @@
 
   <PropertyGroup>
     <!-- Optional, defaults to main.  Name of the branch which will be used for calculating branch point. -->
-    <PGOBranch>main</PGOBranch>
+    <PGOBranch>release-1.19</PGOBranch>
 
     <!-- Mandatory.  Name of the NuGet package which will contain PGO databases for consumption by build system. -->
     <PGOPackageName>Microsoft.Internal.Windows.Terminal.PGODatabase</PGOPackageName>

build/pipelines/daily-loc-submission.yml

@@ -8,6 +8,12 @@ schedules:
         - main
     always: false # only run if there's code changes!
 
+
+parameters:
+  - name: targetBranch
+    type: string
+    default: "automated/loc-update"
+
 pool:
   vmImage: windows-2019
 
@@ -38,6 +44,13 @@ steps:
   persistCredentials: true
   path: s/Terminal.Internal
 
+- pwsh: |-
+    Install-Module PSGitHub -Scope CurrentUser -Force
+    git config --local user.email "consvc@microsoft.com"
+    git config --local user.name "Console Service Bot"
+    git config --local core.autocrlf true
+  displayName: Prepare git submission environment
+
 - task: MicrosoftTDBuild.tdbuild-task.tdbuild-task.TouchdownBuildTask@1
   displayName: 'Touchdown Build - 7105, PRODEXT'
   inputs:
@@ -51,13 +64,44 @@ steps:
     outputDirectoryRoot: LocOutput
     appendRelativeDir: true
     pseudoSetting: Included
+    localizationTarget: true
 
-# Saving one of these makes it really easy to inspect the loc output...
-- powershell: 'tar czf LocOutput.tar.gz LocOutput'
-  displayName: 'Archive Loc Output for Submission'
+- pwsh: |-
+    Remove-Item -EA:Ignore -R -Force LocOutput\Terminal.Internal
+    $Files = Get-ChildItem LocOutput -R -Include 'ContextMenu.resw','Resources.resw' | ? FullName -Like '*en-US\*\*.resw'
+    $Files | % { Move-Item -Verbose $_.Directory $_.Directory.Parent.Parent -EA:Ignore }
+    & tar.exe -c -f LocOutputMunged.tar -C LocOutput .
+    & tar.exe -x -v -f LocOutputMunged.tar
+    rm LocOutputMunged.tar
+    rm -r -fo LocOutput
+    & ./build/scripts/Copy-ContextMenuResourcesToCascadiaPackage.ps1
+  displayName: Move Loc files to the right places
 
-- task: PublishBuildArtifacts@1
-  displayName: 'Publish Artifact: LocOutput'
-  inputs:
-    PathtoPublish: LocOutput.tar.gz
-    ArtifactName: LocOutput
+- pwsh: |-
+    git add **/*.resw
+    git status
+    git diff --quiet --cached --exit-code
+    If ($LASTEXITCODE -Ne 0) {
+      $Now = Get-Date
+      git commit -m "Localization Updates - $Now"
+      git push origin HEAD:refs/heads/${{parameters.targetBranch}} -f
+      Write-Host "##vso[task.setvariable variable=ChangesPushedToRepo]1"
+    } Else {
+      Write-Host "##vso[task.setvariable variable=ChangesPushedToRepo]0"
+    }
+  displayName: git commit and push
+
+- pwsh: |-
+    Import-Module PSGitHub
+    $BaseBranch = "$(Build.SourceBranch)" -Replace "^refs/heads/",""
+    Write-Host "Preparing PR against $BaseBranch"
+    $PSDefaultParameterValues['*GitHub*:Owner'] = "microsoft"
+    $PSDefaultParameterValues['*GitHub*:RepositoryName'] = "terminal"
+    $PSDefaultParameterValues['*GitHub*:Token'] = ("$(GithubPullRequestToken)" | ConvertTo-SecureString -AsPlainText -Force)
+    $existingPr = Get-GitHubPullRequest -HeadBranch "${{parameters.targetBranch}}" -BaseBranch $BaseBranch
+    If ($null -Eq $existingPr) {
+      $Now = Get-Date
+      New-GitHubPullRequest -Head "${{parameters.targetBranch}}" -Base $BaseBranch -Title "Localization Updates - $BaseBranch - $Now" -Verbose
+    }
+  displayName: Publish pull request
+  condition: and(eq(variables['ChangesPushedToRepo'], '1'), succeeded())

build/pipelines/nightly.yml

@@ -10,6 +10,12 @@ schedules:
 
 name: $(BuildDefinitionName)_$(date:yyMM).$(date:dd)$(rev:rrr)
 
+parameters:
+  - name: publishToAzure
+    displayName: "Deploy to **PUBLIC** Azure Storage"
+    type: boolean
+    default: true
+
 extends:
   template: templates-v2\pipeline-full-release-build.yml
   parameters:
@@ -21,3 +27,17 @@ extends:
     publishSymbolsToPublic: true
     publishVpackToWindows: false
     symbolExpiryTime: 15 # Nightly builds do not keep symbols for very long!
+    ${{ if eq(true, parameters.publishToAzure) }}:
+      extraPublishJobs:
+        - template: job-deploy-to-azure-storage.yml
+          parameters:
+            pool:
+              name: SHINE-INT-S
+            dependsOn: [PublishSymbols]
+            storagePublicRootURL: $(AppInstallerRootURL)
+            subscription: $(AzureSubscriptionName)
+            storageAccount: $(AzureStorageAccount)
+            storageContainer: $(AzureStorageContainer)
+            buildConfiguration: Release
+            environment: production-canary
+

build/pipelines/ob-nightly.yml

@@ -0,0 +1,49 @@
+trigger: none
+pr: none
+schedules:
+  - cron: "30 3 * * 2-6" # Run at 03:30 UTC Tuesday through Saturday (After the work day in Pacific, Mon-Fri)
+    displayName: "Nightly Terminal Build"
+    branches:
+      include:
+        - main
+    always: false # only run if there's code changes!
+
+parameters:
+  - name: publishToAzure
+    displayName: "Deploy to **PUBLIC** Azure Storage"
+    type: boolean
+    default: true
+
+name: $(BuildDefinitionName)_$(date:yyMM).$(date:dd)$(rev:rrr)
+
+variables:
+  - template: templates-v2/variables-nuget-package-version.yml
+    parameters:
+      branding: Canary
+  - template: templates-v2/variables-onebranch-config.yml
+
+extends:
+  template: templates-v2/pipeline-onebranch-full-release-build.yml
+  parameters:
+    official: true
+    branding: Canary
+    buildTerminal: true
+    pgoBuildMode: Optimize
+    codeSign: true
+    publishSymbolsToPublic: true
+    publishVpackToWindows: false
+    symbolExpiryTime: 15
+    ${{ if eq(true, parameters.publishToAzure) }}:
+      extraPublishJobs:
+        - template: job-deploy-to-azure-storage.yml
+          parameters:
+            pool: { type: windows }
+            dependsOn: [PublishSymbols]
+            storagePublicRootURL: $(AppInstallerRootURL)
+            subscription: $(AzureSubscriptionName)
+            storageAccount: $(AzureStorageAccount)
+            storageContainer: $(AzureStorageContainer)
+            buildConfiguration: Release
+            buildPlatforms: [x64, x86, arm64]
+            environment: production-canary
+

build/pipelines/ob-release.yml

@@ -0,0 +1,83 @@
+trigger: none
+pr: none
+
+# Expose all of these parameters for user configuration.
+parameters:
+  - name: branding
+    displayName: "Branding (Build Type)"
+    type: string
+    default: Release
+    values:
+      - Release
+      - Preview
+      - Canary
+      - Dev
+  - name: buildTerminal
+    displayName: "Build Windows Terminal MSIX"
+    type: boolean
+    default: true
+  - name: buildConPTY
+    displayName: "Build ConPTY NuGet"
+    type: boolean
+    default: false
+  - name: buildWPF
+    displayName: "Build Terminal WPF Control"
+    type: boolean
+    default: false
+  - name: pgoBuildMode
+    displayName: "PGO Build Mode"
+    type: string
+    default: Optimize
+    values:
+      - Optimize
+      - Instrument
+      - None
+  - name: buildConfigurations
+    displayName: "Build Configurations"
+    type: object
+    default:
+      - Release
+  - name: buildPlatforms
+    displayName: "Build Platforms"
+    type: object
+    default:
+      - x64
+      - x86
+      - arm64
+  - name: terminalInternalPackageVersion
+    displayName: "Terminal Internal Package Version"
+    type: string
+    default: '0.0.8'
+
+  - name: publishSymbolsToPublic
+    displayName: "Publish Symbols to MSDL"
+    type: boolean
+    default: true
+  - name: publishVpackToWindows
+    displayName: "Publish VPack to Windows"
+    type: boolean
+    default: false
+
+name: $(BuildDefinitionName)_$(date:yyMM).$(date:dd)$(rev:rrr)
+
+variables:
+  - template: templates-v2/variables-nuget-package-version.yml
+    parameters:
+      branding: ${{ parameters.branding }}
+  - template: templates-v2/variables-onebranch-config.yml
+
+extends:
+  template: templates-v2/pipeline-onebranch-full-release-build.yml
+  parameters:
+    official: true
+    branding: ${{ parameters.branding }}
+    buildTerminal: ${{ parameters.buildTerminal }}
+    buildConPTY: ${{ parameters.buildConPTY }}
+    buildWPF: ${{ parameters.buildWPF }}
+    pgoBuildMode: ${{ parameters.pgoBuildMode }}
+    buildConfigurations: ${{ parameters.buildConfigurations }}
+    buildPlatforms: ${{ parameters.buildPlatforms }}
+    codeSign: true
+    terminalInternalPackageVersion: ${{ parameters.terminalInternalPackageVersion }}
+    publishSymbolsToPublic: ${{ parameters.publishSymbolsToPublic }}
+    publishVpackToWindows: ${{ parameters.publishVpackToWindows }}

build/pipelines/templates-v2/job-build-package-wpf.yml

@@ -97,7 +97,7 @@ jobs:
       flattenFolders: true
 
   - ${{ if eq(parameters.codeSign, true) }}:
-    - task: EsrpCodeSigning@1
+    - task: EsrpCodeSigning@3
       displayName: Submit *.nupkg to ESRP for code signing
       inputs:
         ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a

build/pipelines/templates-v2/job-build-project.yml

@@ -62,6 +62,9 @@ parameters:
   - name: publishArtifacts
     type: boolean
     default: true
+  - name: removeAllNonSignedFiles
+    type: boolean
+    default: false
 
 jobs:
 - job: ${{ parameters.jobName }}
@@ -114,7 +117,7 @@ jobs:
           $SignFragments += "wpfdotnet"
         }
         If ([bool]::Parse("${{ parameters.buildWPF }}")) {
-          $BuildTargets += "Terminal\wpf\PublicTerminalCore"
+          $BuildTargets += "Terminal\Control\Microsoft_Terminal_Control"
           $SignFragments += "wpf"
         }
         If ([bool]::Parse("${{ parameters.buildConPTY }}")) {
@@ -168,6 +171,7 @@ jobs:
   # - Directories ending in Lib (static lib projects that we fully linked into DLLs which may also contain unnecessary resources)
   # - All LocalTests_ project outputs, as they were subsumed into TestHostApp
   # - All PDB files inside the WindowsTerminal/ output, which do not belong there.
+  # - console.dll, which apparently breaks XFGCheck? lol.
   - pwsh: |-
       $binDir = '$(Terminal.BinDir)'
       $ImportLibs = Get-ChildItem $binDir -Recurse -File -Filter '*.exp' | ForEach-Object { $_.FullName -Replace "exp$","lib" }
@@ -184,6 +188,8 @@ jobs:
         $Items += Get-ChildItem '$(Terminal.BinDir)' -Filter '*.pdb' -Recurse
       }
 
+      $Items += Get-ChildItem $binDir -Filter 'console.dll'
+
       $Items | Remove-Item -Recurse -Force -Verbose -ErrorAction:Ignore
     displayName: Clean up static libs and extra symbols
     errorActionPreference: silentlyContinue # It's OK if this silently fails
@@ -224,7 +230,7 @@ jobs:
 
     # Code-sign everything we just put together.
     # We run the signing in Terminal.BinDir, because all of the signing batches are relative to the final architecture/configuration output folder.
-    - task: EsrpCodeSigning@1
+    - task: EsrpCodeSigning@3
       displayName: Submit Signing Request
       inputs:
         ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a
@@ -241,6 +247,14 @@ jobs:
           Write-Host "##vso[task.setvariable variable=WindowsTerminalPackagePath]${PackageFilename}"
         displayName: Re-pack the new Terminal package after signing
 
+    # Some of our governed pipelines explicitly fail builds that have *any* non-codesigned filed (!)
+    - ${{ if eq(parameters.removeAllNonSignedFiles, true) }}:
+      - pwsh: |-
+          Get-ChildItem "$(Terminal.BinDir)" -Recurse -Include "*.dll","*.exe" |
+            Where-Object { (Get-AuthenticodeSignature $_).Status -Ne "Valid" } |
+            Remove-Item -Verbose -Force
+        displayName: Remove all non-signed output files
+
   - ${{ else }}: # No Signing
     - ${{ if or(parameters.buildTerminal, parameters.buildEverything) }}:
       - pwsh: |-

build/pipelines/templates-v2/job-deploy-to-azure-storage.yml

@@ -0,0 +1,70 @@
+parameters:
+  - name: buildConfiguration
+    type: string
+  - name: pool
+    type: object
+    default: []
+  - name: dependsOn
+    type: object
+    default: null
+  - name: artifactStem
+    type: string
+    default: ''
+  - name: variables
+    type: object
+    default: {}
+  - name: environment
+    type: string
+  - name: storagePublicRootURL
+    type: string
+  - name: subscription
+    type: string
+  - name: storageAccount
+    type: string
+  - name: storageContainer
+    type: string
+
+jobs:
+- deployment: DeployAzure
+  ${{ if ne(length(parameters.pool), 0) }}:
+    pool: ${{ parameters.pool }}
+  displayName: Publish to Azure Storage (Prod)
+  dependsOn: ${{ parameters.dependsOn }}
+  variables:
+    ${{ insert }}: ${{ parameters.variables }}
+  environment: ${{ parameters.environment }}
+  strategy:
+    runOnce:
+      deploy:
+        steps:
+        - download: none
+
+        - checkout: self
+          clean: true
+          fetchDepth: 1
+          fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
+          submodules: true
+          persistCredentials: True
+
+        - task: DownloadPipelineArtifact@2
+          displayName: Download MSIX Bundle Artifact
+          inputs:
+            artifactName: appxbundle-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
+            downloadPath: '$(Build.SourcesDirectory)/_out'
+            itemPattern: '**/*.msixbundle'
+
+        - pwsh: |-
+            $b = Get-Item _out/*.msixbundle
+            ./build/scripts/New-AppInstallerFromTemplateAndBundle.ps1 -BundlePath $b.FullName -AppInstallerTemplatePath ./build/config/template.appinstaller -AppInstallerRoot "${{ parameters.storagePublicRootURL }}" -OutputPath _out/Microsoft.WindowsTerminalCanary.appinstaller
+          displayName: "Produce AppInstaller for MSIX bundle"
+
+        - task: AzureFileCopy@5
+          displayName: Publish to Storage Account
+          inputs:
+            sourcePath: _out/*
+            Destination: AzureBlob
+            azureSubscription: ${{ parameters.subscription }}
+            storage: ${{ parameters.storageAccount }}
+            ContainerName: ${{ parameters.storageContainer }}
+            AdditionalArgumentsForBlobCopy: "--content-type application/octet-stream"
+

build/pipelines/templates-v2/job-merge-msix-into-bundle.yml

@@ -29,6 +29,9 @@ parameters:
   - name: publishArtifacts
     type: boolean
     default: true
+  - name: afterBuildSteps
+    type: stepList
+    default: []
 
 jobs:
 - job: ${{ parameters.jobName }}
@@ -48,6 +51,8 @@ jobs:
       BundleStemName: Microsoft.WindowsTerminal
     ${{ elseif eq(parameters.branding, 'Preview') }}:
       BundleStemName: Microsoft.WindowsTerminalPreview
+    ${{ elseif eq(parameters.branding, 'Canary') }}:
+      BundleStemName: Microsoft.WindowsTerminalCanary
     ${{ else }}:
       BundleStemName: WindowsTerminalDev
     JobOutputDirectory: '$(System.ArtifactsDirectory)/bundle'
@@ -83,11 +88,13 @@ jobs:
       $Components[0] = ([int]$Components[0] + $VersionEpoch)
       $BundleVersion = $Components -Join "."
       New-Item -Type Directory "$(System.ArtifactsDirectory)/bundle"
-      .\build\scripts\Create-AppxBundle.ps1 -InputPath 'bin/' -ProjectName CascadiaPackage -BundleVersion $BundleVersion -OutputPath "$(System.ArtifactsDirectory)\bundle\$(BundleStemName)_$(XES_APPXMANIFESTVERSION)_8wekyb3d8bbwe.msixbundle"
+      $BundlePath = "$(System.ArtifactsDirectory)\bundle\$(BundleStemName)_$(XES_APPXMANIFESTVERSION)_8wekyb3d8bbwe.msixbundle"
+      .\build\scripts\Create-AppxBundle.ps1 -InputPath 'bin/' -ProjectName CascadiaPackage -BundleVersion $BundleVersion -OutputPath $BundlePath
+      Write-Host "##vso[task.setvariable variable=MsixBundlePath]${BundlePath}"
     displayName: Create msixbundle
 
   - ${{ if eq(parameters.codeSign, true) }}:
-    - task: EsrpCodeSigning@1
+    - task: EsrpCodeSigning@3
       displayName: Submit *.msixbundle to ESRP for code signing
       inputs:
         ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a
@@ -137,6 +144,8 @@ jobs:
         ValidateSignature: true
         Verbosity: 'Verbose'
 
+  - ${{ parameters.afterBuildSteps }}
+
   - ${{ if eq(parameters.publishArtifacts, true) }}:
     - publish: $(JobOutputDirectory)
       artifact: $(JobOutputArtifactName)

build/pipelines/templates-v2/job-package-conpty.yml

@@ -82,7 +82,7 @@ jobs:
       versionEnvVar: XES_PACKAGEVERSIONNUMBER
 
   - ${{ if eq(parameters.codeSign, true) }}:
-    - task: EsrpCodeSigning@1
+    - task: EsrpCodeSigning@3
       displayName: Submit *.nupkg to ESRP for code signing
       inputs:
         ConnectedServiceName: 9d6d2960-0793-4d59-943e-78dcb434840a

build/pipelines/templates-v2/job-pgo-build-nuget-and-publish.yml

@@ -43,7 +43,7 @@ jobs:
 
   - template: steps-ensure-nuget-version.yml
 
-  - task: NuGetAuthenticate@0
+  - task: NuGetAuthenticate@1
     inputs:
       nuGetServiceConnections: 'Terminal Public Artifact Feed'
 

build/pipelines/templates-v2/job-publish-symbols.yml

@@ -17,6 +17,12 @@ parameters:
   - name: symbolExpiryTime
     type: string
     default: 36530 # This is the default from PublishSymbols@2
+  - name: variables
+    type: object
+    default: {}
+  - name: symbolPatGoesInTaskInputs
+    type: boolean
+    default: false
 
 jobs:
 - job: ${{ parameters.jobName }}
@@ -27,6 +33,8 @@ jobs:
   ${{ else }}:
     displayName: Publish Symbols Internally
   dependsOn: ${{ parameters.dependsOn }}
+  variables:
+    ${{ insert }}: ${{ parameters.variables }}
   steps:
   - checkout: self
     clean: true
@@ -76,6 +84,8 @@ jobs:
         SymbolsProduct: 'Windows Terminal Converged Symbols'
         SymbolsVersion: '$(XES_APPXMANIFESTVERSION)'
         SymbolExpirationInDays: ${{ parameters.symbolExpiryTime }}
+        ${{ if eq(parameters.symbolPatGoesInTaskInputs, true) }}:
+          Pat: $(ADO_microsoftpublicsymbols_PAT)
         # The ADO task does not support indexing of GitHub sources.
       # There is a bug which causes this task to fail if LIB includes an inaccessible path (even though it does not depend on it).
       # To work around this issue, we just force LIB to be any dir that we know exists.
@@ -83,4 +93,5 @@ jobs:
       env:
         LIB: $(Build.SourcesDirectory)
         ArtifactServices_Symbol_AccountName: microsoftpublicsymbols
-        ArtifactServices_Symbol_PAT: $(ADO_microsoftpublicsymbols_PAT)
+        ${{ if ne(parameters.symbolPatGoesInTaskInputs, true) }}:
+          ArtifactServices_Symbol_PAT: $(ADO_microsoftpublicsymbols_PAT)

build/pipelines/templates-v2/pipeline-full-release-build.yml

@@ -51,6 +51,9 @@ parameters:
     type: boolean
     default: false
 
+  - name: extraPublishJobs
+    type: object
+    default: []
   - name: pool
     type: object
     default:
@@ -58,28 +61,9 @@ parameters:
       demands: ImageOverride -equals SHINE-VS17-Latest
 
 variables:
-  # If we are building a branch called "release-*", change the NuGet suffix
-  # to "preview". If we don't do that, XES will set the suffix to "release1"
-  # because it truncates the value after the first period.
-  # We also want to disable the suffix entirely if we're Release branded while
-  # on a release branch.
-  # main is special, however. XES ignores main. Since we never produce actual
-  # shipping builds from main, we want to force it to have a beta label as
-  # well.
-  #
-  # In effect:
-  # BRANCH / BRANDING | Release                    | Preview
-  # ------------------|----------------------------|-----------------------------
-  # release-*         | 1.12.20220427              | 1.13.20220427-preview
-  # main              | 1.14.20220427-experimental | 1.14.20220427-experimental
-  # all others        | 1.14.20220427-mybranch     | 1.14.20220427-mybranch
-  ${{ if startsWith(variables['Build.SourceBranchName'], 'release-') }}:
-    ${{ if eq(parameters.branding, 'Release') }}:
-      NoNuGetPackBetaVersion: true
-    ${{ else }}:
-      NuGetPackBetaVersion: preview
-  ${{ elseif eq(variables['Build.SourceBranchName'], 'main') }}:
-    NuGetPackBetaVersion: experimental
+  - template: variables-nuget-package-version.yml
+    parameters:
+      branding: ${{ parameters.branding }}
 
 resources:
   repositories:
@@ -120,10 +104,6 @@ stages:
                 packageListDownload: e82d490c-af86-4733-9dc4-07b772033204
                 versionListDownload: ${{ parameters.terminalInternalPackageVersion }}
 
-            - template: ./steps-fetch-and-prepare-localizations.yml
-              parameters:
-                includePseudoLoc: true
-
       - ${{ if eq(parameters.buildWPF, true) }}:
         # Add an Any CPU build flavor for the WPF control bits
         - template: ./job-build-project.yml
@@ -193,4 +173,5 @@ stages:
           includePublicSymbolServer: ${{ parameters.publishSymbolsToPublic }}
           symbolExpiryTime: ${{ parameters.symbolExpiryTime }}
 
+      - ${{ parameters.extraPublishJobs }}
 ...

build/pipelines/templates-v2/pipeline-onebranch-full-release-build.yml

@@ -0,0 +1,255 @@
+parameters:
+  - name: official
+    type: boolean
+    default: false
+  - name: branding
+    type: string
+    default: Release
+    values:
+      - Release
+      - Preview
+      - Canary
+      - Dev
+  - name: buildTerminal
+    type: boolean
+    default: true
+  - name: buildConPTY
+    type: boolean
+    default: false
+  - name: buildWPF
+    type: boolean
+    default: false
+  - name: pgoBuildMode
+    type: string
+    default: Optimize
+    values:
+      - Optimize
+      - Instrument
+      - None
+  - name: buildConfigurations
+    type: object
+    default:
+      - Release
+  - name: buildPlatforms
+    type: object
+    default:
+      - x64
+      - x86
+      - arm64
+  - name: codeSign
+    type: boolean
+    default: true
+  - name: terminalInternalPackageVersion
+    type: string
+    default: '0.0.8'
+
+  - name: publishSymbolsToPublic
+    type: boolean
+    default: true
+  - name: publishVpackToWindows
+    type: boolean
+    default: false
+
+  - name: extraPublishJobs
+    type: object
+    default: []
+
+resources:
+  repositories:
+  - repository: templates
+    type: git
+    name: OneBranch.Pipelines/GovernedTemplates
+    ref: refs/heads/main
+
+extends:
+  ${{ if eq(parameters.official, true) }}:
+    template: v2/Microsoft.Official.yml@templates # https://aka.ms/obpipelines/templates
+  ${{ else }}:
+    template: v2/Microsoft.NonOfficial.yml@templates
+  parameters:
+    featureFlags:
+      WindowsHostVersion: 1ESWindows2022
+    platform:
+      name: 'windows_undocked'
+      product: 'Windows Terminal'
+    cloudvault: # https://aka.ms/obpipelines/cloudvault
+      enabled: false
+    globalSdl: # https://aka.ms/obpipelines/sdl
+      asyncSdl:
+        enabled: true
+        tsaOptionsFile: 'build/config/tsa.json'
+      tsa:
+        enabled: true
+        configFile: '$(Build.SourcesDirectory)\build\config\tsa.json'
+      binskim:
+        break: false
+        scanOutputDirectoryOnly: true
+      policheck:
+        break: false
+        severity: Note
+      baseline:
+        baselineFile: '$(Build.SourcesDirectory)\build\config\release.gdnbaselines'
+        suppressionSet: default
+
+    stages:
+      - stage: Build
+        displayName: Build
+        dependsOn: []
+        jobs:
+          - template: ./build/pipelines/templates-v2/job-build-project.yml@self
+            parameters:
+              pool: { type: windows }
+              variables:
+                ob_git_checkout: false # This job checks itself out
+                ob_git_skip_checkout_none: true
+                ob_outputDirectory: $(JobOutputDirectory)
+                ob_artifactBaseName: $(JobOutputArtifactName)
+              publishArtifacts: false # Handled by OneBranch
+              branding: ${{ parameters.branding }}
+              buildTerminal: ${{ parameters.buildTerminal }}
+              buildConPTY: ${{ parameters.buildConPTY }}
+              buildWPF: ${{ parameters.buildWPF }}
+              pgoBuildMode: ${{ parameters.pgoBuildMode }}
+              buildConfigurations: ${{ parameters.buildConfigurations }}
+              buildPlatforms: ${{ parameters.buildPlatforms }}
+              generateSbom: false # this is handled by onebranch
+              removeAllNonSignedFiles: true # appease the overlords
+              codeSign: ${{ parameters.codeSign }}
+              beforeBuildSteps: # Right before we build, lay down the universal package and localizations
+                - task: PkgESSetupBuild@12
+                  displayName: Package ES - Setup Build
+                  inputs:
+                    disableOutputRedirect: true
+
+                - task: UniversalPackages@0
+                  displayName: Download terminal-internal Universal Package
+                  inputs:
+                    feedListDownload: 2b3f8893-a6e8-411f-b197-a9e05576da48
+                    packageListDownload: e82d490c-af86-4733-9dc4-07b772033204
+                    versionListDownload: ${{ parameters.terminalInternalPackageVersion }}
+
+          - ${{ if eq(parameters.buildWPF, true) }}:
+            # Add an Any CPU build flavor for the WPF control bits
+            - template: ./build/pipelines/templates-v2/job-build-project.yml@self
+              parameters:
+                pool: { type: windows }
+                variables:
+                  ob_git_checkout: false # This job checks itself out
+                  ob_git_skip_checkout_none: true
+                  ob_outputDirectory: $(JobOutputDirectory)
+                  ob_artifactBaseName: $(JobOutputArtifactName)
+                publishArtifacts: false # Handled by OneBranch
+                jobName: BuildWPF
+                branding: ${{ parameters.branding }}
+                buildTerminal: false
+                buildWPFDotNetComponents: true
+                buildConfigurations: ${{ parameters.buildConfigurations }}
+                buildPlatforms:
+                  - Any CPU
+                generateSbom: false # this is handled by onebranch
+                removeAllNonSignedFiles: true # appease the overlords
+                codeSign: ${{ parameters.codeSign }}
+                beforeBuildSteps:
+                  - task: PkgESSetupBuild@12
+                    displayName: Package ES - Setup Build
+                    inputs:
+                      disableOutputRedirect: true
+                  # WPF doesn't need the localizations or the universal package, but if it does... put them here.
+
+      - stage: Package
+        displayName: Package
+        dependsOn: [Build]
+        jobs:
+          - ${{ if eq(parameters.buildTerminal, true) }}:
+            - template: ./build/pipelines/templates-v2/job-merge-msix-into-bundle.yml@self
+              parameters:
+                pool: { type: windows }
+                variables:
+                  ob_git_checkout: false # This job checks itself out
+                  ob_git_skip_checkout_none: true
+                  ob_outputDirectory: $(JobOutputDirectory)
+                  ob_artifactBaseName: $(JobOutputArtifactName)
+                  ### This job is also in charge of submitting the vpack to Windows if it's enabled
+                  ob_createvpack_enabled: ${{ and(parameters.buildTerminal, parameters.publishVpackToWindows) }}
+                  ob_updateOSManifest_enabled: ${{ and(parameters.buildTerminal, parameters.publishVpackToWindows) }}
+                  ### If enabled above, these options are in play.
+                  ob_createvpack_packagename: 'WindowsTerminal.app'
+                  ob_createvpack_owneralias: 'conhost@microsoft.com'
+                  ob_createvpack_description: 'VPack for the Windows Terminal Application'
+                  ob_createvpack_targetDestinationDirectory: '$(Destination)'
+                  ob_createvpack_propsFile: false
+                  ob_createvpack_provData: true
+                  ob_createvpack_metadata: '$(Build.SourceVersion)'
+                  ob_createvpack_topLevelRetries: 0
+                  ob_createvpack_failOnStdErr: true
+                  ob_createvpack_taskLogVerbosity: Detailed
+                  ob_createvpack_verbose: true
+                  ob_createvpack_vpackdirectory: '$(JobOutputDirectory)\vpack'
+                  ob_updateOSManifest_gitcheckinConfigPath: '$(Build.SourcesDirectory)\build\config\GitCheckin.json'
+                  # We're skipping the 'fetch' part of the OneBranch rules, but that doesn't mean
+                  # that it doesn't expect to have downloaded a manifest directly to some 'destination'
+                  # folder that it can then update and upload.
+                  # Effectively: it says "destination" but it means "source"
+                  # DH: Don't ask why.
+                  ob_updateOSManifest_destination: $(XES_VPACKMANIFESTDIRECTORY)
+                  ob_updateOSManifest_skipFetch: true
+                publishArtifacts: false # Handled by OneBranch
+                jobName: Bundle
+                branding: ${{ parameters.branding }}
+                buildConfigurations: ${{ parameters.buildConfigurations }}
+                buildPlatforms: ${{ parameters.buildPlatforms }}
+                generateSbom: false # Handled by onebranch
+                codeSign: ${{ parameters.codeSign }}
+                afterBuildSteps:
+                  - pwsh: |-
+                      $d = New-Item "$(JobOutputDirectory)/vpack" -Type Directory
+                      Copy-Item -Verbose -Path "$(MsixBundlePath)" -Destination (Join-Path $d 'Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle')
+                    displayName: Stage msixbundle for vpack
+
+          - ${{ if eq(parameters.buildConPTY, true) }}:
+            - template: ./build/pipelines/templates-v2/job-package-conpty.yml@self
+              parameters:
+                pool: { type: windows }
+                variables:
+                  ob_git_checkout: false # This job checks itself out
+                  ob_git_skip_checkout_none: true
+                  ob_outputDirectory: $(JobOutputDirectory)
+                  ob_artifactBaseName: $(JobOutputArtifactName)
+                publishArtifacts: false # Handled by OneBranch
+                buildConfigurations: ${{ parameters.buildConfigurations }}
+                buildPlatforms: ${{ parameters.buildPlatforms }}
+                generateSbom: false # this is handled by onebranch
+                codeSign: ${{ parameters.codeSign }}
+
+          - ${{ if eq(parameters.buildWPF, true) }}:
+            - template: ./build/pipelines/templates-v2/job-build-package-wpf.yml@self
+              parameters:
+                pool: { type: windows }
+                variables:
+                  ob_git_checkout: false # This job checks itself out
+                  ob_git_skip_checkout_none: true
+                  ob_outputDirectory: $(JobOutputDirectory)
+                  ob_artifactBaseName: $(JobOutputArtifactName)
+                publishArtifacts: false # Handled by OneBranch
+                buildConfigurations: ${{ parameters.buildConfigurations }}
+                buildPlatforms: ${{ parameters.buildPlatforms }}
+                generateSbom: false # this is handled by onebranch
+                codeSign: ${{ parameters.codeSign }}
+
+      - stage: Publish
+        displayName: Publish
+        dependsOn: [Build]
+        jobs:
+          - template: ./build/pipelines/templates-v2/job-publish-symbols.yml@self
+            parameters:
+              pool: { type: windows }
+              includePublicSymbolServer: ${{ parameters.publishSymbolsToPublic }}
+              symbolPatGoesInTaskInputs: true # onebranch tries to muck with the PAT variable, so we need to change how it get the PAT
+              variables:
+                ob_git_checkout: false # This job checks itself out
+                ob_git_skip_checkout_none: true
+                ob_outputDirectory: $(Build.ArtifactStagingDirectory)
+                # Without this, OneBranch will nerf our symbol tasks
+                ob_symbolsPublishing_enabled: true
+
+          - ${{ parameters.extraPublishJobs }}

build/pipelines/templates-v2/steps-fetch-and-prepare-localizations.yml

@@ -1,27 +0,0 @@
-parameters:
-  - name: includePseudoLoc
-    type: boolean
-    default: true
-
-steps:
-  - task: TouchdownBuildTask@1
-    displayName: Download Localization Files
-    inputs:
-      teamId: 7105
-      authId: $(TouchdownAppId)
-      authKey: $(TouchdownAppKey)
-      resourceFilePath: |
-        src\cascadia\**\en-US\*.resw
-      appendRelativeDir: true
-      localizationTarget: false
-      ${{ if eq(parameters.includePseudoLoc, true) }}:
-        pseudoSetting: Included
-
-  - pwsh: |-
-      $Files = Get-ChildItem . -R -Filter 'Resources.resw' | ? FullName -Like '*en-US\*\Resources.resw'
-      $Files | % { Move-Item -Verbose $_.Directory $_.Directory.Parent.Parent -EA:Ignore }
-    displayName: Move Loc files into final locations
-
-  - pwsh: |-
-      ./build/scripts/Copy-ContextMenuResourcesToCascadiaPackage.ps1
-    displayName: Copy the Context Menu Loc Resources to CascadiaPackage

build/pipelines/templates-v2/steps-restore-nuget.yml

@@ -1,7 +1,7 @@
 steps:
 - template: steps-ensure-nuget-version.yml
 
-- task: NuGetAuthenticate@0
+- task: NuGetAuthenticate@1
 
 - script: |-
     echo ##vso[task.setvariable variable=NUGET_RESTORE_MSBUILD_ARGS]/p:Platform=$(BuildPlatform)

build/pipelines/templates-v2/variables-nuget-package-version.yml

@@ -0,0 +1,27 @@
+parameters:
+  - name: branding
+    type: string
+
+variables:
+  # If we are building a branch called "release-*", change the NuGet suffix
+  # to "preview". If we don't do that, XES will set the suffix to "release1"
+  # because it truncates the value after the first period.
+  # We also want to disable the suffix entirely if we're Release branded while
+  # on a release branch.
+  # main is special, however. XES ignores main. Since we never produce actual
+  # shipping builds from main, we want to force it to have a beta label as
+  # well.
+  #
+  # In effect:
+  # BRANCH / BRANDING | Release                    | Preview
+  # ------------------|----------------------------|-----------------------------
+  # release-*         | 1.12.20220427              | 1.13.20220427-preview
+  # main              | 1.14.20220427-experimental | 1.14.20220427-experimental
+  # all others        | 1.14.20220427-mybranch     | 1.14.20220427-mybranch
+  ${{ if startsWith(variables['Build.SourceBranchName'], 'release-') }}:
+    ${{ if eq(parameters.branding, 'Release') }}:
+      NoNuGetPackBetaVersion: true
+    ${{ else }}:
+      NuGetPackBetaVersion: preview
+  ${{ elseif eq(variables['Build.SourceBranchName'], 'main') }}:
+    NuGetPackBetaVersion: experimental

build/pipelines/templates-v2/variables-onebranch-config.yml

@@ -0,0 +1,2 @@
+variables:
+  WindowsContainerImage: 'onebranch.azurecr.io/windows/ltsc2022/vse2022:1.0.02566.28'

build/scripts/Copy-ContextMenuResourcesToCascadiaPackage.ps1

@@ -10,11 +10,12 @@ $LocalizationsFromContextMenu | ForEach-Object {
 ForEach ($pair in $Languages.GetEnumerator()) {
 	$LanguageDir = "./src/cascadia/CascadiaPackage/Resources/$($pair.Key)"
 	$ResPath = "$LanguageDir/Resources.resw"
+	$XmlDocument = $null
 	$PreexistingResw = Get-Item $ResPath -EA:Ignore
 	If ($null -eq $PreexistingResw) {
 		Write-Host "Copying $($pair.Value.FullName) to $ResPath"
+		$XmlDocument = [xml](Get-Content $pair.Value.FullName)
 		New-Item -type Directory $LanguageDir -EA:Ignore
-		Copy-Item $pair.Value.FullName $ResPath
 	} Else {
 		# Merge Them!
 		Write-Host "Merging $($pair.Value.FullName) into $ResPath"
@@ -29,6 +30,19 @@ ForEach ($pair in $Languages.GetEnumerator()) {
 		$newXml.root.data | % {
 			$null = $existingXml.root.AppendChild($existingXml.ImportNode($_, $true))
 		}
-		$existingXml.Save($PreexistingResw.FullName)
+		$XmlDocument = $existingXml # (which has been updated)
 	}
+
+	# Reset paths to be absolute (for .NET)
+	$LanguageDir = (Get-Item $LanguageDir).FullName
+	$ResPath = "$LanguageDir/Resources.resw"
+	# Force the "new" and "preexisting" paths to serialize with XmlWriter,
+	# to ensure consistency.
+	$writerSettings = [System.Xml.XmlWriterSettings]::new()
+	$writerSettings.NewLineChars = "`r`n"
+	$writerSettings.Indent = $true
+	$writer = [System.Xml.XmlWriter]::Create($ResPath, $writerSettings)
+	$XmlDocument.Save($writer)
+	$writer.Flush()
+	$writer.Close()
 }

build/scripts/New-AppInstallerFromTemplateAndBundle.ps1

@@ -0,0 +1,42 @@
+[CmdletBinding()]
+Param(
+    [Parameter(Mandatory,
+      HelpMessage="Path to the .msixbundle")]
+    [string]
+    $BundlePath,
+
+    [Parameter(Mandatory,
+      HelpMessage="Path to the .appinstaller template")]
+    [string]
+    $AppInstallerTemplatePath,
+
+    [string]
+    $AppInstallerRoot,
+
+    [Parameter(Mandatory,
+      HelpMessage="Output Path")]
+    [string]
+    $OutputPath
+)
+
+$ErrorActionPreference = "Stop"
+
+$sentinelFile = New-TemporaryFile
+$directory = New-Item -Type Directory "$($sentinelFile.FullName)_Package"
+Remove-Item $sentinelFile -Force -EA:Ignore
+
+$bundle = (Get-Item $BundlePath)
+& tar.exe -x -f $bundle.FullName -C $directory AppxMetadata/AppxBundleManifest.xml
+
+$xml = [xml](Get-Content (Join-Path $directory "AppxMetadata\AppxBundleManifest.xml"))
+$name = $xml.Bundle.Identity.Name
+$version = $xml.Bundle.Identity.Version
+
+$doc = (Get-Content -ReadCount 0 $AppInstallerTemplatePath)
+$doc = $doc -Replace '\$\$ROOT\$\$',$AppInstallerRoot
+$doc = $doc -Replace '\$\$NAME\$\$',$name
+$doc = $doc -Replace '\$\$VERSION\$\$',$version
+$doc = $doc -Replace '\$\$PACKAGE\$\$',$bundle.Name
+$doc | Out-File -Encoding utf8NoBOM $OutputPath
+
+Get-Item $OutputPath

dep/nuget/packages.config

@@ -9,7 +9,7 @@
   <package id="Microsoft.VisualStudio.Setup.Configuration.Native" version="2.3.2262" targetFramework="native" developmentDependency="true" />
   <package id="Microsoft.UI.Xaml" version="2.8.4" targetFramework="native" />
   <package id="Microsoft.Web.WebView2" version="1.0.1661.34" targetFramework="native" />
-  <package id="Microsoft.Windows.ImplementationLibrary" version="1.0.220201.1" targetFramework="native" developmentDependency="true" />
+  <package id="Microsoft.Windows.ImplementationLibrary" version="1.0.240122.1" targetFramework="native" developmentDependency="true" />
 
   <!-- Managed packages -->
   <package id="Appium.WebDriver" version="3.0.0.2" targetFramework="net45" />

doc/COOKED_READ_DATA.md

@@ -0,0 +1,96 @@
+# COOKED_READ_DATA, aka conhost's readline implementation
+
+## Test instructions
+
+All of the following ✅ marks must be fulfilled during manual testing:
+* ASCII input
+* Chinese input (中文維基百科) ❔
+  * Resizing the window properly wraps/unwraps wide glyphs ❌
+    Broken due to `TextBuffer::Reflow` bugs
+* Surrogate pair input (🙂) ❔
+  * Resizing the window properly wraps/unwraps surrogate pairs ❌
+    Broken due to `TextBuffer::Reflow` bugs
+* In cmd.exe
+  * Create 2 file: "a😊b.txt" and "a😟b.txt"
+  * Press tab: Autocomplete to "a😊b.txt" ✅
+  * Navigate the cursor right past the "a"
+  * Press tab twice: Autocomplete to "a😟b.txt" ✅
+* Execute `printf("    "); gets(buffer);` in C (or equivalent)
+  * Press Tab, A, Ctrl+V, Tab, A ✅
+  * The prompt is "        A^V     A" ✅
+  * Cursor navigation works ✅
+  * Backspacing/Deleting random parts of it works ✅
+  * It never deletes the initial 4 spaces ✅
+* Backspace deletes preceding glyphs ✅
+* Ctrl+Backspace deletes preceding words ✅
+* Escape clears input ✅
+* Home navigates to start ✅
+* Ctrl+Home deletes text between cursor and start ✅
+* End navigates to end ✅
+* Ctrl+End deletes text between cursor and end ✅
+* Left navigates over previous code points ✅
+* Ctrl+Left navigates to previous word-starts ✅
+* Right and F1 navigate over next code points ✅
+  * Pressing right at the end of input copies characters
+    from the previous command ✅
+* Ctrl+Right navigates to next word-ends ✅
+* Insert toggles overwrite mode ✅
+* Delete deletes next code point ✅
+* Up and F5 cycle through history ✅
+  * Doesn't crash with no history ✅
+  * Stops at first entry ✅
+* Down cycles through history ✅
+  * Doesn't crash with no history ✅
+  * Stops at last entry ✅
+* PageUp retrieves the oldest command ✅
+* PageDown retrieves the newest command ✅
+* F2 starts "copy to char" prompt ✅
+  * Escape dismisses prompt ✅
+  * Typing a character copies text from the previous command up
+    until that character into the current buffer (acts identical
+    to F3, but with automatic character search) ✅
+* F3 copies the previous command into the current buffer,
+  starting at the current cursor position,
+  for as many characters as possible ✅
+  * Doesn't erase trailing text if the current buffer
+    is longer than the previous command ✅
+  * Puts the cursor at the end of the copied text ✅
+* F4 starts "copy from char" prompt ✅
+  * Escape dismisses prompt ✅
+  * Erases text between the current cursor position and the
+    first instance of a given char (but not including it) ✅
+* F6 inserts Ctrl+Z ✅
+* F7 without modifiers starts "command list" prompt ✅
+  * Escape dismisses prompt ✅
+  * Minimum size of 40x10 characters ✅
+  * Width expands to fit the widest history command ✅
+  * Height expands up to 20 rows with longer histories ✅
+  * F9 starts "command number" prompt ✅
+  * Left/Right paste replace the buffer with the given command ✅
+    * And put cursor at the end of the buffer ✅
+  * Up/Down navigate selection through history ✅
+    * Stops at start/end with <10 entries ✅
+    * Stops at start/end with >20 entries ✅
+    * Wide text rendering during pagination with >20 entries ✅
+  * Shift+Up/Down moves history items around ✅
+  * Home navigates to first entry ✅
+  * End navigates to last entry ✅
+  * PageUp navigates by 20 items at a time or to first ✅
+  * PageDown navigates by 20 items at a time or to last ✅
+* Alt+F7 clears command history ✅
+* F8 cycles through commands that start with the same text as
+  the current buffer up until the current cursor position ✅
+  * Doesn't crash with no history ✅
+* F9 starts "command number" prompt ✅
+  * Escape dismisses prompt ✅
+  * Ignores non-ASCII-decimal characters ✅
+  * Allows entering between 1 and 5 digits ✅
+  * Pressing Enter fetches the given command from the history ✅
+* Alt+F10 clears doskey aliases ✅
+* In cmd.exe, with an empty prompt in an empty directory:
+  Pressing tab produces an audible bing and prints no text ✅
+* When Narrator is enabled, in cmd.exe:
+  * Typing individual characters announces only
+    exactly each character that is being typed ✅
+  * Backspacing at the end of a prompt announces
+    only exactly each deleted character ✅

doc/ORGANIZATION.md

@@ -32,7 +32,6 @@
 		* `/src/cascadia/TerminalApp` - This DLL represents the implementation of the Windows Terminal application. This includes parsing settings, hosting tabs & panes with Terminals in them, and displaying other UI elements. This DLL is almost entirely UWP-like code, and shouldn't be doing any Win32-like UI work.
 		* `/src/cascadia/WindowsTerminal` - This EXE provides Win32 hosting for the TerminalApp. It will set up XAML islands, and is responsible for drawing the window, either as a standard window or with content in the titlebar (non-client area).
 		* `/src/cascadia/CascadiaPackage` - This is a project for packaging the Windows Terminal and its dependencies into an .appx/.msix for deploying to the machine.
-		* `/src/cascadia/PublicTerminalCore` - This is a DLL wrapper for the TerminalCore and Renderer, similar to `TermControl`, which exposes some exported functions that so the Terminal can be used from C#.
 		* `/src/cascadia/WpfTerminalControl` - A DLL implementing a WPF version of the Terminal Control.
 	* `/src/host` – The meat of the windows console host. This includes buffer, input, output, windowing, server management, clipboard, and most interactions with the console host window that aren’t stated anywhere else. We’re trying to pull things out that are reusable into other libraries, but it’s a work in progress
 		* `/src/host/lib` – Builds the reusable LIB copy of the host

doc/cascadia/profiles.schema.json

@@ -273,6 +273,13 @@
         "useAcrylic":{
           "description": "When set to true, the window will have an acrylic material background when unfocused. When set to false, the window will have a plain, untextured background when unfocused.",
           "type": "boolean"
+        },
+        "opacity": {
+          "default": 100,
+          "description": "Sets the opacity of the window for the profile when unfocused. Accepts values from 0-100.",
+          "maximum": 100,
+          "minimum": 0,
+          "type": "number"
         }
       },
       "type": "object"
@@ -378,8 +385,12 @@
     },
     "ShortcutActionName": {
       "enum": [
+        "addMark",
         "adjustFontSize",
+        "adjustOpacity",
+        "clearAllMarks",
         "clearBuffer",
+        "clearMark",
         "closeOtherPanes",
         "closeOtherTabs",
         "closePane",
@@ -390,6 +401,7 @@
         "copy",
         "duplicateTab",
         "expandSelectionToWord",
+        "experimental.colorSelection",
         "exportBuffer",
         "find",
         "findMatch",
@@ -397,64 +409,60 @@
         "globalSummon",
         "identifyWindow",
         "identifyWindows",
+        "markMode",
         "moveFocus",
         "movePane",
-        "swapPane",
-        "markMode",
         "moveTab",
         "multipleActions",
         "newTab",
         "newWindow",
         "nextTab",
+        "openAbout",
         "openNewTabDropdown",
         "openSettings",
+        "openSystemMenu",
         "openTabColorPicker",
+        "openTabRenamer",
         "openWindowRenamer",
         "paste",
         "prevTab",
-        "renameTab",
-        "openSystemMenu",
-        "openTabRenamer",
         "quakeMode",
+        "quit",
+        "renameTab",
+        "renameWindow",
         "resetFontSize",
         "resizePane",
-        "renameWindow",
+        "restoreLastClosed",
         "scrollDown",
         "scrollDownPage",
+        "scrollToBottom",
+        "scrollToMark",
+        "scrollToTop",
         "scrollUp",
         "scrollUpPage",
-        "scrollToBottom",
-        "scrollToTop",
+        "searchWeb",
+        "selectAll",
         "sendInput",
         "setColorScheme",
+        "setFocusMode",
+        "setFullScreen",
+        "setMaximized",
         "setTabColor",
         "showSuggestions",
         "splitPane",
+        "swapPane",
+        "switchSelectionEndpoint",
         "switchToTab",
         "tabSearch",
         "toggleAlwaysOnTop",
         "toggleBlockSelection",
         "toggleFocusMode",
-        "selectAll",
-        "setFocusMode",
-        "switchSelectionEndpoint",
         "toggleFullscreen",
-        "setFullScreen",
-        "setMaximized",
         "togglePaneZoom",
-        "toggleSplitOrientation",
         "toggleReadOnlyMode",
         "toggleShaderEffects",
+        "toggleSplitOrientation",
         "wt",
-        "quit",
-        "adjustOpacity",
-        "restoreLastClosed",
-        "addMark",
-        "scrollToMark",
-        "clearMark",
-        "clearAllMarks",
-        "searchWeb",
-        "experimental.colorSelection",
         "unbound"
       ],
       "type": "string"
@@ -672,7 +680,7 @@
             },
             "allowEmpty": {
               "description": "Whether to render a folder without entries, or to hide it",
-              "default": "false",
+              "default": false,
               "type": "boolean"
             }
           }
@@ -2279,11 +2287,6 @@
           "description": "When set to true, the background image for the currently focused profile is expanded to encompass the entire window, beneath other panes.",
           "type": "boolean"
         },
-        "compatibility.reloadEnvironmentVariables": {
-          "default": true,
-          "description": "When set to true, when opening a new tab or pane it will get reloaded environment variables.",
-          "type": "boolean"
-        },
         "initialCols": {
           "default": 120,
           "description": "The number of columns displayed in the window upon first load. If \"launchMode\" is set to \"maximized\" (or \"maximizedFocus\"), this property is ignored.",
@@ -2532,6 +2535,11 @@
             "null"
           ]
         },
+        "compatibility.reloadEnvironmentVariables": {
+          "default": true,
+          "description": "When set to true, when opening a new tab or pane it will get reloaded environment variables.",
+          "type": "boolean"
+        },
         "unfocusedAppearance": {
           "$ref": "#/$defs/AppearanceConfig",
           "description": "Sets the appearance of the terminal when it is unfocused.",

oss/libpopcnt/libpopcnt.h

@@ -95,7 +95,7 @@
   #define HAVE_AVX512
 #endif
 
-#if defined(X86_OR_X64)
+#if defined(X86_OR_X64) && !defined(_M_ARM64EC)
   /* MSVC compatible compilers (Windows) */
   #if defined(_MSC_VER)
     /* clang-cl (LLVM 10 from 2020) requires /arch:AVX2 or

scratch/ScratchIslandApp/Package/Resources/de-DE/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Eine Scratch-App für XAML Islands-Tests</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/es-ES/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Una aplicación temporal para pruebas de islas XAML</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/fr-FR/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Une application de travail pour les tests XAML Islands</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/it-IT/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Un'app scratch per i test delle isole XAML</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/ja-JP/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>XAML Islands テスト用のスクラッチ アプリ</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/ko-KR/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>XAML Islands 테스트용 스크래치 앱</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/pt-BR/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Um aplicativo temporário para testes de Ilhas XAML</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/qps-ploc/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>А şςѓάţćћ ǻрр ƒθŗ χÂΜĿ Íŝĺąήðş ŧеšτş !!! !!! !!! !</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/qps-ploca/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Ă šςґаτćĥ àρφ ƒǿя ЖΆΜĹ Іѕℓаñďş ťêšţŝ !!! !!! !!! !</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/qps-plocm/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Ă śćяǻт¢н ãрρ ƒσг ХĂМĽ Īşłдήďѕ ťέśτş !!! !!! !!! !</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/ru-RU/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Вспомогательное приложение для тестов XAML Islands</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/zh-CN/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>用于 XAML 群岛测试的临时应用</value>
+  </data>
+</root>

scratch/ScratchIslandApp/Package/Resources/zh-TW/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>進行 XAML Islands 測試的草稿應用程式</value>
+  </data>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/de-DE/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/es-ES/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/fr-FR/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/it-IT/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/ja-JP/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/ko-KR/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/pt-BR/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/qps-ploc/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/qps-ploca/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/qps-plocm/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/ru-RU/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/zh-CN/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/zh-TW/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

src/buffer/out/Row.cpp

@@ -92,47 +92,35 @@ CharToColumnMapper::CharToColumnMapper(const wchar_t* chars, const uint16_t* cha
 
 // If given a position (`offset`) inside the ROW's text, this function will return the corresponding column.
 // This function in particular returns the glyph's first column.
-til::CoordType CharToColumnMapper::GetLeadingColumnAt(ptrdiff_t offset) noexcept
+til::CoordType CharToColumnMapper::GetLeadingColumnAt(ptrdiff_t targetOffset) noexcept
 {
-    offset = clamp(offset, 0, _lastCharOffset);
+    targetOffset = clamp(targetOffset, 0, _lastCharOffset);
+
+    // This code needs to fulfill two conditions on top of the obvious (a forward/backward search):
+    // A: We never want to stop on a column that is marked with CharOffsetsTrailer (= "GetLeadingColumn").
+    // B: With these parameters we always want to stop at currentOffset=4:
+    //      _charOffsets={4, 6}
+    //      currentOffset=4 *OR* 6
+    //      targetOffset=5
+    //    This is because we're being asked for a "LeadingColumn", while the caller gave us the offset of a
+    //    trailing surrogate pair or similar. Returning the column of the leading half is the correct choice.
 
     auto col = _currentColumn;
-    const auto currentOffset = _charOffsets[col];
+    auto currentOffset = _charOffsets[col];
 
-    // Goal: Move the _currentColumn cursor to a cell which contains the given target offset.
-    // Depending on where the target offset is we have to either search forward or backward.
-    if (offset < currentOffset)
+    // A plain forward-search until we find our targetOffset.
+    // This loop may iterate too far and thus violate our example in condition B, however...
+    while (targetOffset > (currentOffset & CharOffsetsMask))
     {
-        // Backward search.
-        // Goal: Find the first preceding column where the offset is <= the target offset. This results in the first
-        // cell that contains our target offset, even if that offset is in the middle of a long grapheme.
-        //
-        // We abuse the fact that the trailing half of wide glyphs is marked with CharOffsetsTrailer to our advantage.
-        // Since they're >0x8000, the `offset < _charOffsets[col]` check will always be true and ensure we iterate over them.
-        //
-        // Since _charOffsets cannot contain negative values and because offset has been
-        // clamped to be positive we naturally exit when reaching the first column.
-        for (; offset < _charOffsets[col - 1]; --col)
-        {
-        }
+        currentOffset = _charOffsets[++col];
     }
-    else if (offset > currentOffset)
+    // This backward-search is not just a counter-part to the above, but simultaneously also handles conditions A and B.
+    // It abuses the fact that columns marked with CharOffsetsTrailer are >0x8000 and targetOffset is always <0x8000.
+    // This means we skip all "trailer" columns when iterating backwards, and only stop on a non-trailer (= condition A).
+    // Condition B is fixed simply because we iterate backwards after the forward-search (in that exact order).
+    while (targetOffset < currentOffset)
     {
-        // Forward search.
-        // Goal: Find the first subsequent column where the offset is > the target offset.
-        // We stop 1 column before that however so that the next loop works correctly.
-        // It's the inverse of the loop above.
-        //
-        // Since offset has been clamped to be at most 1 less than the maximum
-        // _charOffsets value the loop naturally exits before hitting the end.
-        for (; offset >= (_charOffsets[col + 1] & CharOffsetsMask); ++col)
-        {
-        }
-        // Now that we found the cell that definitely includes this char offset,
-        // we have to iterate back to the cell's starting column.
-        for (; WI_IsFlagSet(_charOffsets[col], CharOffsetsTrailer); --col)
-        {
-        }
+        currentOffset = _charOffsets[--col];
     }
 
     _currentColumn = col;
@@ -152,11 +140,15 @@ til::CoordType CharToColumnMapper::GetTrailingColumnAt(ptrdiff_t offset) noexcep
     return col;
 }
 
+// If given a pointer inside the ROW's text buffer, this function will return the corresponding column.
+// This function in particular returns the glyph's first column.
 til::CoordType CharToColumnMapper::GetLeadingColumnAt(const wchar_t* str) noexcept
 {
     return GetLeadingColumnAt(str - _chars);
 }
 
+// If given a pointer inside the ROW's text buffer, this function will return the corresponding column.
+// This function in particular returns the glyph's last column (this matters for wide glyphs).
 til::CoordType CharToColumnMapper::GetTrailingColumnAt(const wchar_t* str) noexcept
 {
     return GetTrailingColumnAt(str - _chars);
@@ -364,11 +356,16 @@ void ROW::TransferAttributes(const til::small_rle<TextAttribute, uint16_t, 1>& a
 
 void ROW::CopyFrom(const ROW& source)
 {
-    RowCopyTextFromState state{ .source = source };
-    CopyTextFrom(state);
-    TransferAttributes(source.Attributes(), _columnCount);
     _lineRendition = source._lineRendition;
     _wrapForced = source._wrapForced;
+
+    RowCopyTextFromState state{
+        .source = source,
+        .sourceColumnLimit = source.GetReadableColumnCount(),
+    };
+    CopyTextFrom(state);
+
+    TransferAttributes(source.Attributes(), _columnCount);
 }
 
 // Returns the previous possible cursor position, preceding the given column.
@@ -382,7 +379,17 @@ til::CoordType ROW::NavigateToPrevious(til::CoordType column) const noexcept
 // Returns the row width if column is beyond the width of the row.
 til::CoordType ROW::NavigateToNext(til::CoordType column) const noexcept
 {
-    return _adjustForward(_clampedColumn(column + 1));
+    return _adjustForward(_clampedColumnInclusive(column + 1));
+}
+
+// Returns the starting column of the glyph at the given column.
+// In other words, if you have 3 wide glyphs
+//   AA BB CC
+//   01 23 45  <-- column
+// then `AdjustToGlyphStart(3)` returns 2.
+til::CoordType ROW::AdjustToGlyphStart(til::CoordType column) const noexcept
+{
+    return _adjustBackward(_clampedColumn(column));
 }
 
 // Routine Description:
@@ -719,11 +726,12 @@ try
     if (sourceColBeg < sourceColLimit)
     {
         charOffsets = source._charOffsets.subspan(sourceColBeg, static_cast<size_t>(sourceColLimit) - sourceColBeg + 1);
-        const auto charsOffset = charOffsets.front() & CharOffsetsMask;
+        const auto beg = size_t{ charOffsets.front() } & CharOffsetsMask;
+        const auto end = size_t{ charOffsets.back() } & CharOffsetsMask;
         // We _are_ using span. But C++ decided that string_view and span aren't convertible.
         // _chars is a std::span for performance and because it refers to raw, shared memory.
 #pragma warning(suppress : 26481) // Don't use pointer arithmetic. Use span instead (bounds.1).
-        chars = { source._chars.data() + charsOffset, source._chars.size() - charsOffset };
+        chars = { source._chars.data() + beg, end - beg };
     }
 
     WriteHelper h{ *this, state.columnBegin, state.columnLimit, chars };
@@ -939,6 +947,16 @@ til::CoordType ROW::MeasureLeft() const noexcept
 
 til::CoordType ROW::MeasureRight() const noexcept
 {
+    if (_wrapForced)
+    {
+        auto width = _columnCount;
+        if (_doubleBytePadded)
+        {
+            width--;
+        }
+        return width;
+    }
+
     const auto text = GetText();
     const auto beg = text.begin();
     const auto end = text.end();

src/buffer/out/Row.hpp

@@ -71,7 +71,7 @@ struct CharToColumnMapper
 {
     CharToColumnMapper(const wchar_t* chars, const uint16_t* charOffsets, ptrdiff_t lastCharOffset, til::CoordType currentColumn) noexcept;
 
-    til::CoordType GetLeadingColumnAt(ptrdiff_t offset) noexcept;
+    til::CoordType GetLeadingColumnAt(ptrdiff_t targetOffset) noexcept;
     til::CoordType GetTrailingColumnAt(ptrdiff_t offset) noexcept;
     til::CoordType GetLeadingColumnAt(const wchar_t* str) noexcept;
     til::CoordType GetTrailingColumnAt(const wchar_t* str) noexcept;
@@ -136,6 +136,7 @@ public:
 
     til::CoordType NavigateToPrevious(til::CoordType column) const noexcept;
     til::CoordType NavigateToNext(til::CoordType column) const noexcept;
+    til::CoordType AdjustToGlyphStart(til::CoordType column) const noexcept;
 
     void ClearCell(til::CoordType column);
     OutputCellIterator WriteCells(OutputCellIterator it, til::CoordType columnBegin, std::optional<bool> wrap = std::nullopt, std::optional<til::CoordType> limitRight = std::nullopt);

src/buffer/out/search.cpp

@@ -8,30 +8,21 @@
 
 using namespace Microsoft::Console::Types;
 
-bool Search::ResetIfStale(Microsoft::Console::Render::IRenderData& renderData)
-{
-    return ResetIfStale(renderData,
-                        _needle,
-                        _step == -1, // this is the opposite of the initializer below
-                        _caseInsensitive);
-}
-
 bool Search::ResetIfStale(Microsoft::Console::Render::IRenderData& renderData, const std::wstring_view& needle, bool reverse, bool caseInsensitive)
 {
     const auto& textBuffer = renderData.GetTextBuffer();
     const auto lastMutationId = textBuffer.GetLastMutationId();
 
     if (_needle == needle &&
-        _reverse == reverse &&
         _caseInsensitive == caseInsensitive &&
         _lastMutationId == lastMutationId)
     {
+        _step = reverse ? -1 : 1;
         return false;
     }
 
     _renderData = &renderData;
     _needle = needle;
-    _reverse = reverse;
     _caseInsensitive = caseInsensitive;
     _lastMutationId = lastMutationId;
 
@@ -42,14 +33,40 @@ bool Search::ResetIfStale(Microsoft::Console::Render::IRenderData& renderData, c
     return true;
 }
 
-void Search::MovePastCurrentSelection()
+void Search::MoveToCurrentSelection()
 {
     if (_renderData->IsSelectionActive())
     {
-        MovePastPoint(_renderData->GetTextBuffer().ScreenToBufferPosition(_renderData->GetSelectionAnchor()));
+        MoveToPoint(_renderData->GetTextBuffer().ScreenToBufferPosition(_renderData->GetSelectionAnchor()));
     }
 }
 
+void Search::MoveToPoint(const til::point anchor) noexcept
+{
+    if (_results.empty())
+    {
+        return;
+    }
+
+    const auto count = gsl::narrow_cast<ptrdiff_t>(_results.size());
+    ptrdiff_t index = 0;
+
+    if (_step < 0)
+    {
+        for (index = count - 1; index >= 0 && til::at(_results, index).start > anchor; --index)
+        {
+        }
+    }
+    else
+    {
+        for (index = 0; index < count && til::at(_results, index).start < anchor; ++index)
+        {
+        }
+    }
+
+    _index = (index + count) % count;
+}
+
 void Search::MovePastPoint(const til::point anchor) noexcept
 {
     if (_results.empty())
@@ -58,18 +75,17 @@ void Search::MovePastPoint(const til::point anchor) noexcept
     }
 
     const auto count = gsl::narrow_cast<ptrdiff_t>(_results.size());
-    const auto highestIndex = count - 1;
-    auto index = _reverse ? highestIndex : 0;
+    ptrdiff_t index = 0;
 
-    if (_reverse)
+    if (_step < 0)
     {
-        for (; index >= 0 && til::at(_results, index).start >= anchor; --index)
+        for (index = count - 1; index >= 0 && til::at(_results, index).start >= anchor; --index)
         {
         }
     }
     else
     {
-        for (; index <= highestIndex && til::at(_results, index).start <= anchor; ++index)
+        for (index = 0; index < count && til::at(_results, index).start <= anchor; ++index)
         {
         }
     }
@@ -119,7 +135,7 @@ const std::vector<til::point_span>& Search::Results() const noexcept
     return _results;
 }
 
-size_t Search::CurrentMatch() const noexcept
+ptrdiff_t Search::CurrentMatch() const noexcept
 {
     return _index;
 }

src/buffer/out/search.h

@@ -25,10 +25,10 @@ class Search final
 public:
     Search() = default;
 
-    bool ResetIfStale(Microsoft::Console::Render::IRenderData& renderData);
     bool ResetIfStale(Microsoft::Console::Render::IRenderData& renderData, const std::wstring_view& needle, bool reverse, bool caseInsensitive);
 
-    void MovePastCurrentSelection();
+    void MoveToCurrentSelection();
+    void MoveToPoint(til::point anchor) noexcept;
     void MovePastPoint(til::point anchor) noexcept;
     void FindNext() noexcept;
 
@@ -36,14 +36,12 @@ public:
     bool SelectCurrent() const;
 
     const std::vector<til::point_span>& Results() const noexcept;
-    size_t CurrentMatch() const noexcept;
-    bool CurrentDirection() const noexcept;
+    ptrdiff_t CurrentMatch() const noexcept;
 
 private:
     // _renderData is a pointer so that Search() is constexpr default constructable.
     Microsoft::Console::Render::IRenderData* _renderData = nullptr;
     std::wstring _needle;
-    bool _reverse = false;
     bool _caseInsensitive = false;
     uint64_t _lastMutationId = 0;
 

src/buffer/out/textBuffer.cpp

@@ -126,6 +126,8 @@ void TextBuffer::_reserve(til::size screenBufferSize, const TextAttribute& defau
 // The compiler doesn't understand the likelihood of our branches. (PGO does, but that's imperfect.)
 __declspec(noinline) void TextBuffer::_commit(const std::byte* row)
 {
+    assert(row >= _commitWatermark);
+
     const auto rowEnd = row + _bufferRowStride;
     const auto remaining = gsl::narrow_cast<uintptr_t>(_bufferEnd - _commitWatermark);
     const auto minimum = gsl::narrow_cast<uintptr_t>(rowEnd - _commitWatermark);
@@ -146,7 +148,7 @@ void TextBuffer::_decommit() noexcept
     _commitWatermark = _buffer.get();
 }
 
-// Constructs ROWs up to (excluding) the ROW pointed to by `until`.
+// Constructs ROWs between [_commitWatermark,until).
 void TextBuffer::_construct(const std::byte* until) noexcept
 {
     for (; _commitWatermark < until; _commitWatermark += _bufferRowStride)
@@ -158,8 +160,7 @@ void TextBuffer::_construct(const std::byte* until) noexcept
     }
 }
 
-// Destroys all previously constructed ROWs.
-// Be careful! This doesn't reset any of the members, in particular the _commitWatermark.
+// Destructs ROWs between [_buffer,_commitWatermark).
 void TextBuffer::_destroy() const noexcept
 {
     for (auto it = _buffer.get(); it < _commitWatermark; it += _bufferRowStride)
@@ -168,9 +169,8 @@ void TextBuffer::_destroy() const noexcept
     }
 }
 
-// This function is "direct" because it trusts the caller to properly wrap the "offset"
-// parameter modulo the _height of the buffer, etc. But keep in mind that a offset=0
-// is the GetScratchpadRow() and not the GetRowByOffset(0). That one is offset=1.
+// This function is "direct" because it trusts the caller to properly
+// wrap the "offset" parameter modulo the _height of the buffer.
 ROW& TextBuffer::_getRowByOffsetDirect(size_t offset)
 {
     const auto row = _buffer.get() + _bufferRowStride * offset;
@@ -184,6 +184,7 @@ ROW& TextBuffer::_getRowByOffsetDirect(size_t offset)
     return *reinterpret_cast<ROW*>(row);
 }
 
+// See GetRowByOffset().
 ROW& TextBuffer::_getRow(til::CoordType y) const
 {
     // Rows are stored circularly, so the index you ask for is offset by the start position and mod the total of rows.
@@ -197,6 +198,7 @@ ROW& TextBuffer::_getRow(til::CoordType y) const
     }
 
     // We add 1 to the row offset, because row "0" is the one returned by GetScratchpadRow().
+    // See GetScratchpadRow() for more explanation.
 #pragma warning(suppress : 26492) // Don't use const_cast to cast away const or volatile (type.3).
     return const_cast<TextBuffer*>(this)->_getRowByOffsetDirect(gsl::narrow_cast<size_t>(offset) + 1);
 }
@@ -238,6 +240,9 @@ ROW& TextBuffer::GetScratchpadRow()
 // Returns a row filled with whitespace and the given attributes, for you to freely use.
 ROW& TextBuffer::GetScratchpadRow(const TextAttribute& attributes)
 {
+    // The scratchpad row is mapped to the underlying index 0, whereas all regular rows are mapped to
+    // index 1 and up. We do it this way instead of the other way around (scratchpad row at index _height),
+    // because that would force us to MEM_COMMIT the entire buffer whenever this function is called.
     auto& r = _getRowByOffsetDirect(0);
     r.Reset(attributes);
     return r;
@@ -416,6 +421,88 @@ size_t TextBuffer::GraphemePrev(const std::wstring_view& chars, size_t position)
     return til::utf16_iterate_prev(chars, position);
 }
 
+// Ever wondered how much space a piece of text needs before inserting it? This function will tell you!
+// It fundamentally behaves identical to the various ROW functions around `RowWriteState`.
+//
+// Set `columnLimit` to the amount of space that's available (e.g. `buffer_width - cursor_position.x`)
+// and it'll return the amount of characters that fit into this space. The out parameter `columns`
+// will contain the amount of columns this piece of text has actually used.
+//
+// Just like with `RowWriteState` one special case is when not all text fits into the given space:
+// In that case, this function always returns exactly `columnLimit`. This distinction is important when "inserting"
+// a wide glyph but there's only 1 column left. That 1 remaining column is supposed to be padded with whitespace.
+size_t TextBuffer::FitTextIntoColumns(const std::wstring_view& chars, til::CoordType columnLimit, til::CoordType& columns) noexcept
+{
+    columnLimit = std::max(0, columnLimit);
+
+    const auto beg = chars.begin();
+    const auto end = chars.end();
+    auto it = beg;
+    const auto asciiEnd = beg + std::min(chars.size(), gsl::narrow_cast<size_t>(columnLimit));
+
+    // ASCII fast-path: 1 char always corresponds to 1 column.
+    for (; it != asciiEnd && *it < 0x80; ++it)
+    {
+    }
+
+    const auto dist = gsl::narrow_cast<size_t>(it - beg);
+    auto col = gsl::narrow_cast<til::CoordType>(dist);
+
+    if (it == asciiEnd) [[likely]]
+    {
+        columns = col;
+        return dist;
+    }
+
+    // Unicode slow-path where we need to count text and columns separately.
+    for (;;)
+    {
+        auto ptr = &*it;
+        const auto wch = *ptr;
+        size_t len = 1;
+
+        col++;
+
+        // Even in our slow-path we can avoid calling IsGlyphFullWidth if the current character is ASCII.
+        // It also allows us to skip the surrogate pair decoding at the same time.
+        if (wch >= 0x80)
+        {
+            if (til::is_surrogate(wch))
+            {
+                const auto it2 = it + 1;
+                if (til::is_leading_surrogate(wch) && it2 != end && til::is_trailing_surrogate(*it2))
+                {
+                    len = 2;
+                }
+                else
+                {
+                    ptr = &UNICODE_REPLACEMENT;
+                }
+            }
+
+            col += IsGlyphFullWidth({ ptr, len });
+        }
+
+        // If we ran out of columns, we need to always return `columnLimit` and not `cols`,
+        // because if we tried inserting a wide glyph into just 1 remaining column it will
+        // fail to fit, but that remaining column still has been used up. When the caller sees
+        // `columns == columnLimit` they will line-wrap and continue inserting into the next row.
+        if (col > columnLimit)
+        {
+            columns = columnLimit;
+            return gsl::narrow_cast<size_t>(it - beg);
+        }
+
+        // But if we simply ran out of text we just need to return the actual number of columns.
+        it += len;
+        if (it == end)
+        {
+            columns = col;
+            return chars.size();
+        }
+    }
+}
+
 // Pretend as if `position` is a regular cursor in the TextBuffer.
 // This function will then pretend as if you pressed the left/right arrow
 // keys `distance` amount of times (negative = left, positive = right).
@@ -806,9 +893,9 @@ void TextBuffer::IncrementCircularBuffer(const TextAttribute& fillAttributes)
 // - The viewport
 //Return value:
 // - Coordinate position (relative to the text buffer)
-til::point TextBuffer::GetLastNonSpaceCharacter(std::optional<const Microsoft::Console::Types::Viewport> viewOptional) const
+til::point TextBuffer::GetLastNonSpaceCharacter(const Viewport* viewOptional) const
 {
-    const auto viewport = viewOptional.has_value() ? viewOptional.value() : GetSize();
+    const auto viewport = viewOptional ? *viewOptional : GetSize();
 
     til::point coordEndOfText;
     // Search the given viewport by starting at the bottom.
@@ -820,15 +907,14 @@ til::point TextBuffer::GetLastNonSpaceCharacter(std::optional<const Microsoft::C
 
     // If the X coordinate turns out to be -1, the row was empty, we need to search backwards for the real end of text.
     const auto viewportTop = viewport.Top();
-    auto fDoBackUp = (coordEndOfText.x < 0 && coordEndOfText.y > viewportTop); // this row is empty, and we're not at the top
-    while (fDoBackUp)
+
+    // while (this row is empty, and we're not at the top)
+    while (coordEndOfText.x < 0 && coordEndOfText.y > viewportTop)
     {
         coordEndOfText.y--;
         const auto& backupRow = GetRowByOffset(coordEndOfText.y);
         // We need to back up to the previous row if this line is empty, AND there are more rows
-
         coordEndOfText.x = backupRow.MeasureRight() - 1;
-        fDoBackUp = (coordEndOfText.x < 0 && coordEndOfText.y > viewportTop);
     }
 
     // don't allow negative results
@@ -1064,52 +1150,79 @@ void TextBuffer::Reset() noexcept
     _initialAttributes = _currentAttributes;
 }
 
+void TextBuffer::ClearScrollback(const til::CoordType start, const til::CoordType height)
+{
+    if (start <= 0)
+    {
+        return;
+    }
+
+    if (height <= 0)
+    {
+        _decommit();
+        return;
+    }
+
+    // Our goal is to move the viewport to the absolute start of the underlying memory buffer so that we can
+    // MEM_DECOMMIT the remaining memory. _firstRow is used to make the TextBuffer behave like a circular buffer.
+    // The start parameter is relative to the _firstRow. The trick to get the content to the absolute start
+    // is to simply add _firstRow ourselves and then reset it to 0. This causes ScrollRows() to write into
+    // the absolute start while reading from relative coordinates. This works because GetRowByOffset()
+    // operates modulo the buffer height and so the possibly-too-large startAbsolute won't be an issue.
+    const auto startAbsolute = _firstRow + start;
+    _firstRow = 0;
+    ScrollRows(startAbsolute, height, -startAbsolute);
+
+    const auto end = _estimateOffsetOfLastCommittedRow();
+    for (auto y = height; y <= end; ++y)
+    {
+        GetMutableRowByOffset(y).Reset(_initialAttributes);
+    }
+
+    ScrollMarks(-start);
+    ClearMarksInRange(til::point{ 0, height }, til::point{ _width, _height });
+}
+
 // Routine Description:
 // - This is the legacy screen resize with minimal changes
 // Arguments:
 // - newSize - new size of screen.
 // Return Value:
 // - Success if successful. Invalid parameter if screen buffer size is unexpected. No memory if allocation failed.
-[[nodiscard]] NTSTATUS TextBuffer::ResizeTraditional(til::size newSize) noexcept
+void TextBuffer::ResizeTraditional(til::size newSize)
 {
     // Guard against resizing the text buffer to 0 columns/rows, which would break being able to insert text.
     newSize.width = std::max(newSize.width, 1);
     newSize.height = std::max(newSize.height, 1);
 
-    try
+    TextBuffer newBuffer{ newSize, _currentAttributes, 0, false, _renderer };
+    const auto cursorRow = GetCursor().GetPosition().y;
+    const auto copyableRows = std::min<til::CoordType>(_height, newSize.height);
+    til::CoordType srcRow = 0;
+    til::CoordType dstRow = 0;
+
+    if (cursorRow >= newSize.height)
     {
-        TextBuffer newBuffer{ newSize, _currentAttributes, 0, false, _renderer };
-        const auto cursorRow = GetCursor().GetPosition().y;
-        const auto copyableRows = std::min<til::CoordType>(_height, newSize.height);
-        til::CoordType srcRow = 0;
-        til::CoordType dstRow = 0;
-
-        if (cursorRow >= newSize.height)
-        {
-            srcRow = cursorRow - newSize.height + 1;
-        }
-
-        for (; dstRow < copyableRows; ++dstRow, ++srcRow)
-        {
-            newBuffer.GetMutableRowByOffset(dstRow).CopyFrom(GetRowByOffset(srcRow));
-        }
-
-        // NOTE: Keep this in sync with _reserve().
-        _buffer = std::move(newBuffer._buffer);
-        _bufferEnd = newBuffer._bufferEnd;
-        _commitWatermark = newBuffer._commitWatermark;
-        _initialAttributes = newBuffer._initialAttributes;
-        _bufferRowStride = newBuffer._bufferRowStride;
-        _bufferOffsetChars = newBuffer._bufferOffsetChars;
-        _bufferOffsetCharOffsets = newBuffer._bufferOffsetCharOffsets;
-        _width = newBuffer._width;
-        _height = newBuffer._height;
-
-        _SetFirstRowIndex(0);
+        srcRow = cursorRow - newSize.height + 1;
     }
-    CATCH_RETURN();
 
-    return S_OK;
+    for (; dstRow < copyableRows; ++dstRow, ++srcRow)
+    {
+        newBuffer.GetMutableRowByOffset(dstRow).CopyFrom(GetRowByOffset(srcRow));
+    }
+
+    // NOTE: Keep this in sync with _reserve().
+    _buffer = std::move(newBuffer._buffer);
+    _bufferEnd = newBuffer._bufferEnd;
+    _commitWatermark = newBuffer._commitWatermark;
+    _initialAttributes = newBuffer._initialAttributes;
+    _bufferRowStride = newBuffer._bufferRowStride;
+    _bufferOffsetChars = newBuffer._bufferOffsetChars;
+    _bufferOffsetCharOffsets = newBuffer._bufferOffsetCharOffsets;
+    _width = newBuffer._width;
+    _height = newBuffer._height;
+
+    _SetFirstRowIndex(0);
 }
 
 void TextBuffer::SetAsActiveBuffer(const bool isActiveBuffer) noexcept
@@ -2201,6 +2314,7 @@ std::string TextBuffer::GenHTML(const TextAndColor& rows,
 // Routine Description:
 // - Generates an RTF document based on the passed in text and color data
 //   RTF 1.5 Spec: https://www.biblioscape.com/rtf15_spec.htm
+//   RTF 1.9.1 Spec: https://msopenspecs.azureedge.net/files/Archive_References/[MSFT-RTF].pdf
 // Arguments:
 // - rows - the text and color data we will format & encapsulate
 // - backgroundColor - default background color for characters, also used in padding
@@ -2220,10 +2334,18 @@ std::string TextBuffer::GenRTF(const TextAndColor& rows, const int fontHeightPoi
 
         // Standard RTF header.
         // This is similar to the header generated by WordPad.
-        // \ansi - specifies that the ANSI char set is used in the current doc
-        // \ansicpg1252 - represents the ANSI code page which is used to perform the Unicode to ANSI conversion when writing RTF text
-        // \deff0 - specifies that the default font for the document is the one at index 0 in the font table
-        // \nouicompat - ?
+        // \ansi:
+        //   Specifies that the ANSI char set is used in the current doc.
+        // \ansicpg1252:
+        //   Represents the ANSI code page which is used to perform
+        //   the Unicode to ANSI conversion when writing RTF text.
+        // \deff0:
+        //   Specifies that the default font for the document is the one
+        //   at index 0 in the font table.
+        // \nouicompat:
+        //   Some features are blocked by default to maintain compatibility
+        //   with older programs (Eg. Word 97-2003). `nouicompat` disables this
+        //   behavior, and unblocks these features. See: Spec 1.9.1, Pg. 51.
         rtfBuilder << "\\rtf1\\ansi\\ansicpg1252\\deff0\\nouicompat";
 
         // font table
@@ -2232,17 +2354,25 @@ std::string TextBuffer::GenRTF(const TextAndColor& rows, const int fontHeightPoi
         // map to keep track of colors:
         // keys are colors represented by COLORREF
         // values are indices of the corresponding colors in the color table
-        std::unordered_map<COLORREF, int> colorMap;
-        auto nextColorIndex = 1; // leave 0 for the default color and start from 1.
+        std::unordered_map<COLORREF, size_t> colorMap;
 
         // RTF color table
         std::ostringstream colorTableBuilder;
         colorTableBuilder << "{\\colortbl ;";
-        colorTableBuilder << "\\red" << static_cast<int>(GetRValue(backgroundColor))
-                          << "\\green" << static_cast<int>(GetGValue(backgroundColor))
-                          << "\\blue" << static_cast<int>(GetBValue(backgroundColor))
-                          << ";";
-        colorMap[backgroundColor] = nextColorIndex++;
+
+        const auto getColorTableIndex = [&](const COLORREF color) -> size_t {
+            // Exclude the 0 index for the default color, and start with 1.
+
+            const auto [it, inserted] = colorMap.emplace(color, colorMap.size() + 1);
+            if (inserted)
+            {
+                colorTableBuilder << "\\red" << static_cast<int>(GetRValue(color))
+                                  << "\\green" << static_cast<int>(GetGValue(color))
+                                  << "\\blue" << static_cast<int>(GetBValue(color))
+                                  << ";";
+            }
+            return it->second;
+        };
 
         // content
         std::ostringstream contentBuilder;
@@ -2252,7 +2382,12 @@ std::string TextBuffer::GenRTF(const TextAndColor& rows, const int fontHeightPoi
         // \fs specifies font size in half-points i.e. \fs20 results in a font size
         // of 10 pts. That's why, font size is multiplied by 2 here.
         contentBuilder << "\\pard\\slmult1\\f0\\fs" << std::to_string(2 * fontHeightPoints)
-                       << "\\highlight1"
+                       // Set the background color for the page. But, the
+                       // standard way (\cbN) to do this isn't supported in Word.
+                       // However, the following control words sequence works
+                       // in Word (and other RTF editors also) for applying the
+                       // text background color. See: Spec 1.9.1, Pg. 23.
+                       << "\\chshdng0\\chcbpat" << getColorTableIndex(backgroundColor)
                        << " ";
 
         std::optional<COLORREF> fgColor = std::nullopt;
@@ -2302,43 +2437,8 @@ std::string TextBuffer::GenRTF(const TextAndColor& rows, const int fontHeightPoi
                 if (colorChanged)
                 {
                     writeAccumulatedChars(false);
-
-                    auto bkColorIndex = 0;
-                    if (colorMap.find(bkColor.value()) != colorMap.end())
-                    {
-                        // color already exists in the map, just retrieve the index
-                        bkColorIndex = colorMap[bkColor.value()];
-                    }
-                    else
-                    {
-                        // color not present in the map, so add it
-                        colorTableBuilder << "\\red" << static_cast<int>(GetRValue(bkColor.value()))
-                                          << "\\green" << static_cast<int>(GetGValue(bkColor.value()))
-                                          << "\\blue" << static_cast<int>(GetBValue(bkColor.value()))
-                                          << ";";
-                        colorMap[bkColor.value()] = nextColorIndex;
-                        bkColorIndex = nextColorIndex++;
-                    }
-
-                    auto fgColorIndex = 0;
-                    if (colorMap.find(fgColor.value()) != colorMap.end())
-                    {
-                        // color already exists in the map, just retrieve the index
-                        fgColorIndex = colorMap[fgColor.value()];
-                    }
-                    else
-                    {
-                        // color not present in the map, so add it
-                        colorTableBuilder << "\\red" << static_cast<int>(GetRValue(fgColor.value()))
-                                          << "\\green" << static_cast<int>(GetGValue(fgColor.value()))
-                                          << "\\blue" << static_cast<int>(GetBValue(fgColor.value()))
-                                          << ";";
-                        colorMap[fgColor.value()] = nextColorIndex;
-                        fgColorIndex = nextColorIndex++;
-                    }
-
-                    contentBuilder << "\\highlight" << bkColorIndex
-                                   << "\\cf" << fgColorIndex
+                    contentBuilder << "\\chshdng0\\chcbpat" << getColorTableIndex(bkColor.value())
+                                   << "\\cf" << getColorTableIndex(fgColor.value())
                                    << " ";
                 }
 
@@ -2412,204 +2512,181 @@ void TextBuffer::_AppendRTFText(std::ostringstream& contentBuilder, const std::w
 //   the new buffer. The rows's new value is placed back into this parameter.
 // Return Value:
 // - S_OK if we successfully copied the contents to the new buffer, otherwise an appropriate HRESULT.
-HRESULT TextBuffer::Reflow(TextBuffer& oldBuffer,
-                           TextBuffer& newBuffer,
-                           const std::optional<Viewport> lastCharacterViewport,
-                           std::optional<std::reference_wrapper<PositionInformation>> positionInfo)
-try
+void TextBuffer::Reflow(TextBuffer& oldBuffer, TextBuffer& newBuffer, const Viewport* lastCharacterViewport, PositionInformation* positionInfo)
 {
     const auto& oldCursor = oldBuffer.GetCursor();
     auto& newCursor = newBuffer.GetCursor();
 
-    // We need to save the old cursor position so that we can
-    // place the new cursor back on the equivalent character in
-    // the new buffer.
-    const auto cOldCursorPos = oldCursor.GetPosition();
-    const auto cOldLastChar = oldBuffer.GetLastNonSpaceCharacter(lastCharacterViewport);
+    til::point oldCursorPos = oldCursor.GetPosition();
+    til::point newCursorPos;
 
-    const auto cOldRowsTotal = cOldLastChar.y + 1;
+    // BODGY: We use oldCursorPos in two critical places below:
+    // * To compute an oldHeight that includes at a minimum the cursor row
+    // * For REFLOW_JANK_CURSOR_WRAP (see comment below)
+    // Both of these would break the reflow algorithm, but the latter of the two in particular
+    // would cause the main copy loop below to deadlock. In other words, these two lines
+    // protect this function against yet-unknown bugs in other parts of the code base.
+    oldCursorPos.x = std::clamp(oldCursorPos.x, 0, oldBuffer._width - 1);
+    oldCursorPos.y = std::clamp(oldCursorPos.y, 0, oldBuffer._height - 1);
 
-    til::point cNewCursorPos;
-    auto fFoundCursorPos = false;
-    auto foundOldMutable = false;
-    auto foundOldVisible = false;
-    // Loop through all the rows of the old buffer and reprint them into the new buffer
-    til::CoordType iOldRow = 0;
-    for (; iOldRow < cOldRowsTotal; iOldRow++)
+    const auto lastRowWithText = oldBuffer.GetLastNonSpaceCharacter(lastCharacterViewport).y;
+
+    auto mutableViewportTop = positionInfo ? positionInfo->mutableViewportTop : til::CoordTypeMax;
+    auto visibleViewportTop = positionInfo ? positionInfo->visibleViewportTop : til::CoordTypeMax;
+
+    til::CoordType oldY = 0;
+    til::CoordType newY = 0;
+    til::CoordType newX = 0;
+    til::CoordType newWidth = newBuffer.GetSize().Width();
+    til::CoordType newYLimit = til::CoordTypeMax;
+
+    const auto oldHeight = std::max(lastRowWithText, oldCursorPos.y) + 1;
+    const auto newHeight = newBuffer.GetSize().Height();
+    const auto newWidthU16 = gsl::narrow_cast<uint16_t>(newWidth);
+
+    // Copy oldBuffer into newBuffer until oldBuffer has been fully consumed.
+    for (; oldY < oldHeight && newY < newYLimit; ++oldY)
     {
-        // Fetch the row and its "right" which is the last printable character.
-        const auto& row = oldBuffer.GetRowByOffset(iOldRow);
-        const auto cOldColsTotal = oldBuffer.GetLineWidth(iOldRow);
-        auto iRight = row.MeasureRight();
+        const auto& oldRow = oldBuffer.GetRowByOffset(oldY);
 
-        // If we're starting a new row, try and preserve the line rendition
-        // from the row in the original buffer.
-        const auto newBufferPos = newCursor.GetPosition();
-        if (newBufferPos.x == 0)
+        // A pair of double height rows should optimally wrap as a union (i.e. after wrapping there should be 4 lines).
+        // But for this initial implementation I chose the alternative approach: Just truncate them.
+        if (oldRow.GetLineRendition() != LineRendition::SingleWidth)
         {
-            auto& newRow = newBuffer.GetMutableRowByOffset(newBufferPos.y);
-            newRow.SetLineRendition(row.GetLineRendition());
-        }
-
-        // There is a special case here. If the row has a "wrap"
-        // flag on it, but the right isn't equal to the width (one
-        // index past the final valid index in the row) then there
-        // were a bunch trailing of spaces in the row.
-        // (But the measuring functions for each row Left/Right do
-        // not count spaces as "displayable" so they're not
-        // included.)
-        // As such, adjust the "right" to be the width of the row
-        // to capture all these spaces
-        if (row.WasWrapForced())
-        {
-            iRight = cOldColsTotal;
-
-            // And a combined special case.
-            // If we wrapped off the end of the row by adding a
-            // piece of padding because of a double byte LEADING
-            // character, then remove one from the "right" to
-            // leave this padding out of the copy process.
-            if (row.WasDoubleBytePadded())
+            // Since rows with a non-standard line rendition should be truncated it's important
+            // that we pretend as if the previous row ended in a newline, even if it didn't.
+            // This is what this if does: It newlines.
+            if (newX)
             {
-                iRight--;
-            }
-        }
-
-        // Loop through every character in the current row (up to
-        // the "right" boundary, which is one past the final valid
-        // character)
-        til::CoordType iOldCol = 0;
-        const auto copyRight = iRight;
-        for (; iOldCol < copyRight; iOldCol++)
-        {
-            if (iOldCol == cOldCursorPos.x && iOldRow == cOldCursorPos.y)
-            {
-                cNewCursorPos = newCursor.GetPosition();
-                fFoundCursorPos = true;
+                newX = 0;
+                newY++;
             }
 
-            // TODO: MSFT: 19446208 - this should just use an iterator and the inserter...
-            const auto glyph = row.GlyphAt(iOldCol);
-            const auto dbcsAttr = row.DbcsAttrAt(iOldCol);
-            const auto textAttr = row.GetAttrByColumn(iOldCol);
+            auto& newRow = newBuffer.GetMutableRowByOffset(newY);
 
-            newBuffer.InsertCharacter(glyph, dbcsAttr, textAttr);
-        }
-
-        // GH#32: Copy the attributes from the rest of the row into this new buffer.
-        // From where we are in the old buffer, to the end of the row, copy the
-        // remaining attributes.
-        // - if the old buffer is smaller than the new buffer, then just copy
-        //   what we have, as it was. We already copied all _text_ with colors,
-        //   but it's possible for someone to just put some color into the
-        //   buffer to the right of that without any text (as just spaces). The
-        //   buffer looks weird to the user when we resize and it starts losing
-        //   those colors, so we need to copy them over too... as long as there
-        //   is space. The last attr in the row will be extended to the end of
-        //   the row in the new buffer.
-        // - if the old buffer is WIDER, than we might have wrapped onto a new
-        //   line. Use the cursor's position's Y so that we know where the new
-        //   row is, and start writing at the cursor position. Again, the attr
-        //   in the last column of the old row will be extended to the end of the
-        //   row that the text was flowed onto.
-        //   - if the text in the old buffer didn't actually fill the whole
-        //     line in the new buffer, then we didn't wrap. That's fine. just
-        //     copy attributes from the old row till the end of the new row, and
-        //     move on.
-        const auto newRowY = newCursor.GetPosition().y;
-        auto& newRow = newBuffer.GetMutableRowByOffset(newRowY);
-        auto newAttrColumn = newCursor.GetPosition().x;
-        const auto newWidth = newBuffer.GetLineWidth(newRowY);
-        // Stop when we get to the end of the buffer width, or the new position
-        // for inserting an attr would be past the right of the new buffer.
-        for (auto copyAttrCol = iOldCol;
-             copyAttrCol < cOldColsTotal && newAttrColumn < newWidth;
-             copyAttrCol++, newAttrColumn++)
-        {
-            // TODO: MSFT: 19446208 - this should just use an iterator and the inserter...
-            const auto textAttr = row.GetAttrByColumn(copyAttrCol);
-            newRow.SetAttrToEnd(newAttrColumn, textAttr);
-        }
-
-        // If we found the old row that the caller was interested in, set the
-        // out value of that parameter to the cursor's current Y position (the
-        // new location of the _end_ of that row in the buffer).
-        if (positionInfo.has_value())
-        {
-            if (!foundOldMutable)
+            // See the comment marked with "REFLOW_RESET".
+            if (newY >= newHeight)
             {
-                if (iOldRow >= positionInfo.value().get().mutableViewportTop)
+                newRow.Reset(newBuffer._initialAttributes);
+            }
+
+            newRow.CopyFrom(oldRow);
+            newRow.SetWrapForced(false);
+
+            if (oldY == oldCursorPos.y)
+            {
+                newCursorPos = { newRow.AdjustToGlyphStart(oldCursorPos.x), newY };
+            }
+            if (oldY >= mutableViewportTop)
+            {
+                positionInfo->mutableViewportTop = newY;
+                mutableViewportTop = til::CoordTypeMax;
+            }
+            if (oldY >= visibleViewportTop)
+            {
+                positionInfo->visibleViewportTop = newY;
+                visibleViewportTop = til::CoordTypeMax;
+            }
+
+            newY++;
+            continue;
+        }
+
+        // Rows don't store any information for what column the last written character is in.
+        // We simply truncate all trailing whitespace in this implementation.
+        auto oldRowLimit = oldRow.MeasureRight();
+        if (oldY == oldCursorPos.y)
+        {
+            // REFLOW_JANK_CURSOR_WRAP:
+            // Pretending as if there's always at least whitespace in front of the cursor has the benefit that
+            // * the cursor retains its distance from any preceding text.
+            // * when a client application starts writing on this new, empty line,
+            //   enlarging the buffer unwraps the text onto the preceding line.
+            oldRowLimit = std::max(oldRowLimit, oldCursorPos.x + 1);
+        }
+
+        til::CoordType oldX = 0;
+
+        // Copy oldRow into newBuffer until oldRow has been fully consumed.
+        // We use a do-while loop to ensure that line wrapping occurs and
+        // that attributes are copied over even for seemingly empty rows.
+        do
+        {
+            // This if condition handles line wrapping.
+            // Only if we write past the last column we should wrap and as such this if
+            // condition is in front of the text insertion code instead of behind it.
+            // A SetWrapForced of false implies an explicit newline, which is the default.
+            if (newX >= newWidth)
+            {
+                newBuffer.GetMutableRowByOffset(newY).SetWrapForced(true);
+                newX = 0;
+                newY++;
+            }
+
+            // REFLOW_RESET:
+            // If we shrink the buffer vertically, for instance from 100 rows to 90 rows, we will write 10 rows in the
+            // new buffer twice. We need to reset them before copying text, or otherwise we'll see the previous contents.
+            // We don't need to be smart about this. Reset() is fast and shrinking doesn't occur often.
+            if (newY >= newHeight && newX == 0)
+            {
+                // We need to ensure not to overwrite the row the cursor is on.
+                if (newY >= newYLimit)
                 {
-                    positionInfo.value().get().mutableViewportTop = newCursor.GetPosition().y;
-                    foundOldMutable = true;
+                    break;
                 }
+                newBuffer.GetMutableRowByOffset(newY).Reset(newBuffer._initialAttributes);
             }
 
-            if (!foundOldVisible)
+            auto& newRow = newBuffer.GetMutableRowByOffset(newY);
+
+            RowCopyTextFromState state{
+                .source = oldRow,
+                .columnBegin = newX,
+                .columnLimit = til::CoordTypeMax,
+                .sourceColumnBegin = oldX,
+                .sourceColumnLimit = oldRowLimit,
+            };
+            newRow.CopyTextFrom(state);
+
+            const auto& oldAttr = oldRow.Attributes();
+            auto& newAttr = newRow.Attributes();
+            const auto attributes = oldAttr.slice(gsl::narrow_cast<uint16_t>(oldX), oldAttr.size());
+            newAttr.replace(gsl::narrow_cast<uint16_t>(newX), newAttr.size(), attributes);
+            newAttr.resize_trailing_extent(newWidthU16);
+
+            if (oldY == oldCursorPos.y && oldCursorPos.x >= oldX)
             {
-                if (iOldRow >= positionInfo.value().get().visibleViewportTop)
-                {
-                    positionInfo.value().get().visibleViewportTop = newCursor.GetPosition().y;
-                    foundOldVisible = true;
-                }
+                // In theory AdjustToGlyphStart ensures we don't put the cursor on a trailing wide glyph.
+                // In practice I don't think that this can possibly happen. Better safe than sorry.
+                newCursorPos = { newRow.AdjustToGlyphStart(oldCursorPos.x - oldX + newX), newY };
+                // If there's so much text past the old cursor position that it doesn't fit into new buffer,
+                // then the new cursor position will be "lost", because it's overwritten by unrelated text.
+                // We have two choices how can handle this:
+                // * If the new cursor is at an y < 0, just put the cursor at (0,0)
+                // * Stop writing into the new buffer before we overwrite the new cursor position
+                // This implements the second option. There's no fundamental reason why this is better.
+                newYLimit = newY + newHeight;
+            }
+            if (oldY >= mutableViewportTop)
+            {
+                positionInfo->mutableViewportTop = newY;
+                mutableViewportTop = til::CoordTypeMax;
+            }
+            if (oldY >= visibleViewportTop)
+            {
+                positionInfo->visibleViewportTop = newY;
+                visibleViewportTop = til::CoordTypeMax;
             }
-        }
 
-        // If we didn't have a full row to copy, insert a new
-        // line into the new buffer.
-        // Only do so if we were not forced to wrap. If we did
-        // force a word wrap, then the existing line break was
-        // only because we ran out of space.
-        if (iRight < cOldColsTotal && !row.WasWrapForced())
+            oldX = state.sourceColumnEnd;
+            newX = state.columnEnd;
+        } while (oldX < oldRowLimit);
+
+        // If the row had an explicit newline we also need to newline. :)
+        if (!oldRow.WasWrapForced())
         {
-            if (!fFoundCursorPos && (iRight == cOldCursorPos.x && iOldRow == cOldCursorPos.y))
-            {
-                cNewCursorPos = newCursor.GetPosition();
-                fFoundCursorPos = true;
-            }
-            // Only do this if it's not the final line in the buffer.
-            // On the final line, we want the cursor to sit
-            // where it is done printing for the cursor
-            // adjustment to follow.
-            if (iOldRow < cOldRowsTotal - 1)
-            {
-                newBuffer.NewlineCursor();
-            }
-            else
-            {
-                // If we are on the final line of the buffer, we have one more check.
-                // We got into this code path because we are at the right most column of a row in the old buffer
-                // that had a hard return (no wrap was forced).
-                // However, as we're inserting, the old row might have just barely fit into the new buffer and
-                // caused a new soft return (wrap was forced) putting the cursor at x=0 on the line just below.
-                // We need to preserve the memory of the hard return at this point by inserting one additional
-                // hard newline, otherwise we've lost that information.
-                // We only do this when the cursor has just barely poured over onto the next line so the hard return
-                // isn't covered by the soft one.
-                // e.g.
-                // The old line was:
-                // |aaaaaaaaaaaaaaaaaaa | with no wrap which means there was a newline after that final a.
-                // The cursor was here ^
-                // And the new line will be:
-                // |aaaaaaaaaaaaaaaaaaa| and show a wrap at the end
-                // |                   |
-                //  ^ and the cursor is now there.
-                // If we leave it like this, we've lost the newline information.
-                // So we insert one more newline so a continued reflow of this buffer by resizing larger will
-                // continue to look as the original output intended with the newline data.
-                // After this fix, it looks like this:
-                // |aaaaaaaaaaaaaaaaaaa| no wrap at the end (preserved hard newline)
-                // |                   |
-                //  ^ and the cursor is now here.
-                const auto coordNewCursor = newCursor.GetPosition();
-                if (coordNewCursor.x == 0 && coordNewCursor.y > 0)
-                {
-                    if (newBuffer.GetRowByOffset(coordNewCursor.y - 1).WasWrapForced())
-                    {
-                        newBuffer.NewlineCursor();
-                    }
-                }
-            }
+            newX = 0;
+            newY++;
         }
     }
 
@@ -2617,85 +2694,40 @@ try
     // printable character. This is to fix the `color 2f` scenario, where you
     // change the buffer colors then resize and everything below the last
     // printable char gets reset. See GH #12567
-    auto newRowY = newCursor.GetPosition().y + 1;
-    const auto newHeight = newBuffer.GetSize().Height();
-    const auto oldHeight = oldBuffer._estimateOffsetOfLastCommittedRow() + 1;
-    for (;
-         iOldRow < oldHeight && newRowY < newHeight;
-         iOldRow++)
+    const auto initializedRowsEnd = oldBuffer._estimateOffsetOfLastCommittedRow() + 1;
+    for (; oldY < initializedRowsEnd && newY < newHeight; oldY++, newY++)
     {
-        const auto& row = oldBuffer.GetRowByOffset(iOldRow);
-
-        // Optimization: Since all these rows are below the last printable char,
-        // we can reasonably assume that they are filled with just spaces.
-        // That's convenient, we can just copy the attr row from the old buffer
-        // into the new one, and resize the row to match. We'll rely on the
-        // behavior of ATTR_ROW::Resize to trim down when narrower, or extend
-        // the last attr when wider.
-        auto& newRow = newBuffer.GetMutableRowByOffset(newRowY);
-        const auto newWidth = newBuffer.GetLineWidth(newRowY);
-        newRow.TransferAttributes(row.Attributes(), newWidth);
-
-        newRowY++;
+        auto& oldRow = oldBuffer.GetRowByOffset(oldY);
+        auto& newRow = newBuffer.GetMutableRowByOffset(newY);
+        auto& newAttr = newRow.Attributes();
+        newAttr = oldRow.Attributes();
+        newAttr.resize_trailing_extent(newWidthU16);
+    }
+
+    // Since we didn't use IncrementCircularBuffer() we need to compute the proper
+    // _firstRow offset now, in a way that replicates IncrementCircularBuffer().
+    // We need to do the same for newCursorPos.y for basically the same reason.
+    if (newY > newHeight)
+    {
+        newBuffer._firstRow = newY % newHeight;
+        // _firstRow maps from API coordinates that always start at 0,0 in the top left corner of the
+        // terminal's scrollback, to the underlying buffer Y coordinate via `(y + _firstRow) % height`.
+        // Here, we need to un-map the `newCursorPos.y` from the underlying Y coordinate to the API coordinate
+        // and so we do `(y - _firstRow) % height`, but we add `+ newHeight` to avoid getting negative results.
+        newCursorPos.y = (newCursorPos.y - newBuffer._firstRow + newHeight) % newHeight;
     }
 
-    // Finish copying remaining parameters from the old text buffer to the new one
     newBuffer.CopyProperties(oldBuffer);
     newBuffer.CopyHyperlinkMaps(oldBuffer);
 
-    // If we found where to put the cursor while placing characters into the buffer,
-    //   just put the cursor there. Otherwise we have to advance manually.
-    if (fFoundCursorPos)
-    {
-        newCursor.SetPosition(cNewCursorPos);
-    }
-    else
-    {
-        // Advance the cursor to the same offset as before
-        // get the number of newlines and spaces between the old end of text and the old cursor,
-        //   then advance that many newlines and chars
-        auto iNewlines = cOldCursorPos.y - cOldLastChar.y;
-        const auto iIncrements = cOldCursorPos.x - cOldLastChar.x;
-        const auto cNewLastChar = newBuffer.GetLastNonSpaceCharacter();
-
-        // If the last row of the new buffer wrapped, there's going to be one less newline needed,
-        //   because the cursor is already on the next line
-        if (newBuffer.GetRowByOffset(cNewLastChar.y).WasWrapForced())
-        {
-            iNewlines = std::max(iNewlines - 1, 0);
-        }
-        else
-        {
-            // if this buffer didn't wrap, but the old one DID, then the d(columns) of the
-            //   old buffer will be one more than in this buffer, so new need one LESS.
-            if (oldBuffer.GetRowByOffset(cOldLastChar.y).WasWrapForced())
-            {
-                iNewlines = std::max(iNewlines - 1, 0);
-            }
-        }
-
-        for (auto r = 0; r < iNewlines; r++)
-        {
-            newBuffer.NewlineCursor();
-        }
-        for (auto c = 0; c < iIncrements - 1; c++)
-        {
-            newBuffer.IncrementCursor();
-        }
-    }
-
-    // Save old cursor size before we delete it
-    const auto ulSize = oldCursor.GetSize();
-
-    // Set size back to real size as it will be taking over the rendering duties.
-    newCursor.SetSize(ulSize);
+    assert(newCursorPos.x >= 0 && newCursorPos.x < newWidth);
+    assert(newCursorPos.y >= 0 && newCursorPos.y < newHeight);
+    newCursor.SetSize(oldCursor.GetSize());
+    newCursor.SetPosition(newCursorPos);
 
     newBuffer._marks = oldBuffer._marks;
     newBuffer._trimMarksOutsideBuffer();
-
-    return S_OK;
 }
-CATCH_RETURN()
 
 // Method Description:
 // - Adds or updates a hyperlink in our hyperlink table
@@ -2916,14 +2948,10 @@ void TextBuffer::AddMark(const ScrollMark& m)
 
 void TextBuffer::_trimMarksOutsideBuffer()
 {
-    const auto height = GetSize().Height();
-    _marks.erase(std::remove_if(_marks.begin(),
-                                _marks.end(),
-                                [height](const auto& m) {
-                                    return (m.start.y < 0) ||
-                                           (m.start.y >= height);
-                                }),
-                 _marks.end());
+    const til::CoordType height = _height;
+    std::erase_if(_marks, [height](const auto& m) {
+        return (m.start.y < 0) || (m.start.y >= height);
+    });
 }
 
 std::wstring_view TextBuffer::CurrentCommand() const

src/buffer/out/textBuffer.hpp

@@ -137,6 +137,7 @@ public:
 
     static size_t GraphemeNext(const std::wstring_view& chars, size_t position) noexcept;
     static size_t GraphemePrev(const std::wstring_view& chars, size_t position) noexcept;
+    static size_t FitTextIntoColumns(const std::wstring_view& chars, til::CoordType columnLimit, til::CoordType& columns) noexcept;
 
     til::point NavigateCursor(til::point position, til::CoordType distance) const;
 
@@ -163,7 +164,7 @@ public:
     // Scroll needs access to this to quickly rotate around the buffer.
     void IncrementCircularBuffer(const TextAttribute& fillAttributes = {});
 
-    til::point GetLastNonSpaceCharacter(std::optional<const Microsoft::Console::Types::Viewport> viewOptional = std::nullopt) const;
+    til::point GetLastNonSpaceCharacter(const Microsoft::Console::Types::Viewport* viewOptional = nullptr) const;
 
     Cursor& GetCursor() noexcept;
     const Cursor& GetCursor() const noexcept;
@@ -193,8 +194,9 @@ public:
     til::point BufferToScreenPosition(const til::point position) const;
 
     void Reset() noexcept;
+    void ClearScrollback(const til::CoordType start, const til::CoordType height);
 
-    [[nodiscard]] HRESULT ResizeTraditional(const til::size newSize) noexcept;
+    void ResizeTraditional(const til::size newSize);
 
     void SetAsActiveBuffer(const bool isActiveBuffer) noexcept;
     bool IsActiveBuffer() const noexcept;
@@ -262,10 +264,7 @@ public:
         til::CoordType visibleViewportTop{ 0 };
     };
 
-    static HRESULT Reflow(TextBuffer& oldBuffer,
-                          TextBuffer& newBuffer,
-                          const std::optional<Microsoft::Console::Types::Viewport> lastCharacterViewport,
-                          std::optional<std::reference_wrapper<PositionInformation>> positionInfo);
+    static void Reflow(TextBuffer& oldBuffer, TextBuffer& newBuffer, const Microsoft::Console::Types::Viewport* lastCharacterViewport = nullptr, PositionInformation* positionInfo = nullptr);
 
     std::vector<til::point_span> SearchText(const std::wstring_view& needle, bool caseInsensitive) const;
     std::vector<til::point_span> SearchText(const std::wstring_view& needle, bool caseInsensitive, til::CoordType rowBeg, til::CoordType rowEnd) const;

src/buffer/out/ut_textbuffer/ReflowTests.cpp

@@ -46,8 +46,6 @@ namespace
         std::vector<TestBuffer> buffers;
     };
 
-    static constexpr auto true_due_to_exact_wrap_bug{ true };
-
     static const TestCase testCases[] = {
         TestCase{
             L"No reflow required",
@@ -61,7 +59,7 @@ namespace
                         { L"EFG   ", false },
                         { L"      ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
@@ -72,7 +70,7 @@ namespace
                         { L"EFG  ", false },
                         { L"     ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 4, 5 },
@@ -83,7 +81,7 @@ namespace
                         { L"EFG ", false },
                         { L"    ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
             },
         },
@@ -99,40 +97,40 @@ namespace
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
                     {
                         { L"ABCDE", true },
-                        { L"F$   ", false }, // [BUG] EXACT WRAP. $ should be alone on next line.
-                        { L"     ", false },
+                        { L"F    ", false },
+                        { L"$    ", false },
                         { L"     ", false },
                         { L"     ", false },
                     },
-                    { 1, 1 } // cursor on $
+                    { 0, 2 }, // cursor on $
                 },
                 TestBuffer{
                     { 6, 5 }, // grow width back to original
                     {
-                        { L"ABCDEF", true_due_to_exact_wrap_bug },
+                        { L"ABCDEF", false },
                         { L"$     ", false },
                         { L"      ", false },
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 7, 5 }, // grow width wider than original
                     {
-                        { L"ABCDEF$", true_due_to_exact_wrap_bug }, // EXACT WRAP BUG: $ should be alone on next line
-                        { L"       ", false },
+                        { L"ABCDEF ", false },
+                        { L"$      ", false },
                         { L"       ", false },
                         { L"       ", false },
                         { L"       ", false },
                     },
-                    { 6, 0 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
             },
         },
@@ -148,7 +146,7 @@ namespace
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 1, 1 } // cursor on $
+                    { 1, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
@@ -159,7 +157,7 @@ namespace
                         { L"     ", false },
                         { L"     ", false },
                     },
-                    { 2, 1 } // cursor on $
+                    { 2, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 6, 5 }, // grow width back to original
@@ -170,7 +168,7 @@ namespace
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 1, 1 } // cursor on $
+                    { 1, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 7, 5 }, // grow width wider than original
@@ -181,7 +179,7 @@ namespace
                         { L"       ", false },
                         { L"       ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
             },
         },
@@ -197,29 +195,29 @@ namespace
                         { L"EFG   ", false },
                         { L"      ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 7, 5 }, // reduce width by 1
                     {
                         { L"AB    $", true },
-                        { L"     CD", true_due_to_exact_wrap_bug },
-                        { L"       ", false },
+                        { L"     CD", false }, // CD ends with a newline -> .wrap = false
                         { L"EFG    ", false },
                         { L"       ", false },
+                        { L"       ", false },
                     },
-                    { 6, 0 } // cursor on $
+                    { 6, 0 }, // cursor on $
                 },
                 TestBuffer{
                     { 8, 5 },
                     {
                         { L"AB    $ ", true },
-                        { L"    CD  ", false }, // Goes to false because we hit the end of ..CD
-                        { L"EFG     ", false }, // [BUG] EFG moves up due to exact wrap bug above
+                        { L"    CD  ", false },
+                        { L"EFG     ", false },
                         { L"        ", false },
                         { L"        ", false },
                     },
-                    { 6, 0 } // cursor on $
+                    { 6, 0 }, // cursor on $
                 },
             },
         },
@@ -236,19 +234,19 @@ namespace
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 2, 1 } // cursor on $
+                    { 2, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
                     {
                         //--012345--
                         { L"カタ ", true }, // KA TA [FORCED SPACER]
-                        { L"カナ$", true_due_to_exact_wrap_bug }, // KA NA
+                        { L"カナ$", false }, // KA NA
                         { L"     ", false },
                         { L"     ", false },
                         { L"     ", false },
                     },
-                    { 4, 1 } // cursor on $
+                    { 4, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 6, 5 }, // grow width back to original
@@ -260,7 +258,7 @@ namespace
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 2, 1 } // cursor on $
+                    { 2, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 7, 5 }, // grow width wider than original (by one; no visible change!)
@@ -272,7 +270,7 @@ namespace
                         { L"       ", false },
                         { L"       ", false },
                     },
-                    { 2, 1 } // cursor on $
+                    { 2, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 8, 5 }, // grow width enough to fit second DBCS
@@ -284,7 +282,7 @@ namespace
                         { L"        ", false },
                         { L"        ", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
             },
         },
@@ -300,41 +298,29 @@ namespace
                         { L"MNOPQR", false },
                         { L"STUVWX", false },
                     },
-                    { 0, 1 } // cursor on $
+                    { 0, 1 }, // cursor on $
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
                     {
-                        { L"F$   ", false },
-                        { L"GHIJK", true }, // [BUG] We should see GHIJK\n L\n MNOPQ\n R\n
-                        { L"LMNOP", true }, // The wrapping here is irregular
-                        { L"QRSTU", true },
-                        { L"VWX  ", false },
+                        { L"$    ", false },
+                        { L"GHIJK", true },
+                        { L"L    ", false },
+                        { L"MNOPQ", true },
+                        { L"R    ", false },
                     },
-                    { 1, 1 } // [BUG] cursor moves to 1,1 instead of sticking with the $
+                    { 0, 0 },
                 },
                 TestBuffer{
                     { 6, 5 }, // going back to 6,5, the data lost has been destroyed
                     {
-                        //{ L"F$    ", false }, // [BUG] this line is erroneously destroyed too!
-                        { L"GHIJKL", true },
-                        { L"MNOPQR", true },
-                        { L"STUVWX", true },
+                        { L"$     ", false },
+                        { L"GHIJKL", false },
+                        { L"MNOPQR", false },
+                        { L"      ", false },
                         { L"      ", false },
-                        { L"      ", false }, // [BUG] this line is added
                     },
-                    { 1, 1 }, // [BUG] cursor does not follow [H], it sticks at 1,1
-                },
-                TestBuffer{
-                    { 7, 5 }, // a number of errors are carried forward from the previous buffer
-                    {
-                        { L"GHIJKLM", true },
-                        { L"NOPQRST", true },
-                        { L"UVWX   ", false }, // [BUG] This line loses wrap for some reason
-                        { L"       ", false },
-                        { L"       ", false },
-                    },
-                    { 0, 1 }, // [BUG] The cursor moves to 0, 1 now, sticking with the [N] from before
+                    { 0, 0 },
                 },
             },
         },
@@ -353,18 +339,18 @@ namespace
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 1, 1 } // cursor *after* $
+                    { 1, 1 }, // cursor *after* $
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
                     {
                         { L"ABCDE", true },
-                        { L"F$   ", false }, // [BUG] EXACT WRAP. $ should be alone on next line.
-                        { L"     ", false },
+                        { L"F    ", false },
+                        { L"$    ", false },
                         { L"     ", false },
                         { L"     ", false },
                     },
-                    { 2, 1 } // cursor follows space after $ to next line
+                    { 1, 2 }, // cursor follows space after $ to next line
                 },
             },
         },
@@ -380,7 +366,7 @@ namespace
                         { L"STUVWX", true },
                         { L"YZ0 $ ", false },
                     },
-                    { 5, 4 } // cursor *after* $
+                    { 5, 4 }, // cursor *after* $
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
@@ -391,7 +377,7 @@ namespace
                         { L"UVWXY", true },
                         { L"Z0 $ ", false },
                     },
-                    { 4, 4 } // cursor follows space after $ to newly introduced bottom line
+                    { 4, 4 }, // cursor follows space after $ to newly introduced bottom line
                 },
             },
         },
@@ -402,40 +388,36 @@ namespace
                     { 6, 5 },
                     {
                         { L"ABCDEF", false },
-                        //       v cursor
                         { L"$     ", false },
-                        //       ^ cursor
                         { L"      ", false },
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 5, 1 } // cursor in space far after $
+                    { 5, 1 }, // The cursor is 5 columns to the right of the $ (last column).
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
                     {
                         { L"ABCDE", true },
-                        { L"F$   ", true }, // [BUG] This line is marked wrapped, and I do not know why
-                        //   v cursor
-                        { L"     ", false },
-                        //   ^ cursor
+                        { L"F    ", false },
+                        // The reflow implementation marks a wrapped cursor as a forced row-wrap (= the row is padded with whitespace), so that when
+                        // the buffer is enlarged again, we restore the original cursor position correctly. That's why it says .cursor={5,1} below.
+                        { L"$    ", true },
                         { L"     ", false },
                         { L"     ", false },
                     },
-                    { 1, 2 } // cursor stays same linear distance from $
+                    { 0, 3 }, // $ is now at 0,2 and the cursor used to be 5 columns to the right. -> 0,3
                 },
                 TestBuffer{
                     { 6, 5 }, // grow back to original size
                     {
-                        { L"ABCDEF", true_due_to_exact_wrap_bug },
-                        //      v cursor [BUG] cursor does not retain linear distance from $
+                        { L"ABCDEF", false },
                         { L"$     ", false },
-                        //      ^ cursor
                         { L"      ", false },
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 4, 1 } // cursor stays same linear distance from $
+                    { 5, 1 },
                 },
             },
         },
@@ -446,39 +428,37 @@ namespace
                     { 6, 5 },
                     {
                         { L"ABCDEF", false },
-                        //       v cursor
                         { L"$     ", false },
-                        //       ^ cursor
                         { L"BLAH  ", false },
                         { L"BLAH  ", false },
                         { L"      ", false },
                     },
-                    { 5, 1 } // cursor in space far after $
+                    { 5, 1 }, // The cursor is 5 columns to the right of the $ (last column).
                 },
                 TestBuffer{
                     { 5, 5 }, // reduce width by 1
                     {
-                        { L"ABCDE", true },
-                        { L"F$   ", false },
-                        { L"BLAH ", false },
-                        { L"BLAH ", true }, // [BUG] this line wraps, no idea why
-                        //  v cursor [BUG] cursor erroneously moved to end of all content
+                        { L"F    ", false },
+                        // The reflow implementation pads the row with the cursor with whitespace.
+                        // Search for "REFLOW_JANK_CURSOR_WRAP" to find the corresponding code.
+                        { L"$    ", true },
                         { L"     ", false },
-                        //  ^ cursor
+                        { L"BLAH ", false },
+                        { L"BLAH ", false },
                     },
-                    { 0, 4 } },
+                    { 0, 2 },
+                },
                 TestBuffer{
                     { 6, 5 }, // grow back to original size
                     {
-                        { L"ABCDEF", true },
+                        { L"F     ", false },
                         { L"$     ", false },
                         { L"BLAH  ", false },
-                        //       v cursor [BUG] cursor is pulled up to previous line because it was marked wrapped
                         { L"BLAH  ", false },
-                        //       ^ cursor
                         { L"      ", false },
                     },
-                    { 5, 3 } },
+                    { 5, 1 },
+                },
             },
         },
         TestCase{
@@ -489,27 +469,24 @@ namespace
                     { 6, 5 },
                     {
                         { L"ABCDEF", false },
-                        //       v cursor
                         { L"$     ", false },
-                        //       ^ cursor
                         { L"      ", false },
                         { L"      ", false },
                         { L"      ", false },
                     },
-                    { 5, 1 } // cursor in space far after $
+                    { 5, 1 }, // The cursor is 5 columns to the right of the $ (last column).
                 },
                 TestBuffer{
                     { 2, 5 }, // reduce width aggressively
                     {
                         { L"CD", true },
-                        { L"EF", true },
+                        { L"EF", false },
                         { L"$ ", true },
                         { L"  ", true },
-                        //   v cursor
                         { L"  ", false },
-                        //   ^ cursor
                     },
-                    { 1, 4 } },
+                    { 1, 4 },
+                },
             },
         },
         TestCase{
@@ -519,27 +496,24 @@ namespace
                     { 6, 5 },
                     {
                         { L"ABCDEF", true },
-                        //       v cursor
                         { L"$     ", true },
-                        //       ^ cursor
                         { L"      ", true },
                         { L"      ", true },
                         { L"      ", true },
                     },
-                    { 5, 1 } // cursor in space far after $
+                    { 5, 1 }, // cursor in space far after $
                 },
                 TestBuffer{
                     { 2, 5 }, // reduce width aggressively
                     {
-                        { L"EF", true },
-                        { L"$ ", true },
                         { L"  ", true },
                         { L"  ", true },
-                        //   v cursor [BUG] cursor does not maintain linear distance from $
-                        { L"  ", false },
-                        //   ^ cursor
+                        { L"  ", true },
+                        { L"  ", true },
+                        { L"  ", true },
                     },
-                    { 1, 4 } },
+                    { 1, 0 },
+                },
             },
         },
         TestCase{
@@ -549,14 +523,12 @@ namespace
                     { 6, 5 },
                     {
                         { L"ABCDEF", true },
-                        //       v cursor
                         { L"$     ", true },
-                        //       ^ cursor
                         { L"      ", true },
                         { L"      ", true },
                         { L"     Q", true },
                     },
-                    { 5, 1 } // cursor in space far after $
+                    { 5, 1 }, // cursor in space far after $
                 },
                 TestBuffer{
                     { 2, 5 }, // reduce width aggressively
@@ -564,12 +536,11 @@ namespace
                         { L"  ", true },
                         { L"  ", true },
                         { L"  ", true },
-                        { L" Q", true },
-                        //   v cursor [BUG] cursor jumps to end of world
-                        { L"  ", false }, // POTENTIAL [BUG] a whole new blank line is added for the cursor
-                        //   ^ cursor
+                        { L"  ", true },
+                        { L"  ", true },
                     },
-                    { 1, 4 } },
+                    { 1, 0 },
+                },
             },
         },
         TestCase{
@@ -579,27 +550,24 @@ namespace
                     { 6, 5 },
                     {
                         { L"ABCDEF", false },
-                        //       v cursor
                         { L"$     ", false },
-                        //       ^ cursor
                         { L"      ", false },
                         { L"      ", true },
                         { L"     Q", true },
                     },
-                    { 5, 1 } // cursor in space far after $
+                    { 5, 1 }, // cursor in space far after $
                 },
                 TestBuffer{
                     { 2, 5 }, // reduce width aggressively
                     {
-                        { L"  ", true },
-                        { L"  ", true },
-                        { L"  ", true },
-                        { L" Q", true },
-                        //  v  cursor [BUG] cursor jumps to different place than fully wrapped case
                         { L"  ", false },
-                        //  ^  cursor
+                        { L"  ", false },
+                        { L"  ", true },
+                        { L"  ", true },
+                        { L"  ", true },
                     },
-                    { 0, 4 } },
+                    { 1, 0 },
+                },
             },
         },
         TestCase{
@@ -614,24 +582,21 @@ namespace
                         { L"$     ", false },
                         { L"     Q", true },
                         { L"      ", true },
-                        //       v cursor
                         { L"      ", true },
-                        //       ^ cursor
                     },
-                    { 5, 4 } // cursor at end of buffer
+                    { 5, 4 }, // cursor at end of buffer
                 },
                 TestBuffer{
                     { 2, 5 }, // reduce width aggressively
                     {
+                        { L"  ", false },
+                        { L"  ", true },
+                        { L"  ", true },
                         { L"  ", true },
                         { L"  ", true },
-                        { L" Q", true },
-                        { L"  ", false },
-                        //  v  cursor [BUG] cursor loses linear distance from Q; is this important?
-                        { L"  ", false },
-                        //  ^  cursor
                     },
-                    { 0, 4 } },
+                    { 1, 0 },
+                },
             },
         },
     };
@@ -761,7 +726,7 @@ class ReflowTests
     static std::unique_ptr<TextBuffer> _textBufferByReflowingTextBuffer(TextBuffer& originalBuffer, const til::size newSize)
     {
         auto buffer = std::make_unique<TextBuffer>(newSize, TextAttribute{ 0x7 }, 0, false, renderer);
-        TextBuffer::Reflow(originalBuffer, *buffer, std::nullopt, std::nullopt);
+        TextBuffer::Reflow(originalBuffer, *buffer);
         return buffer;
     }
 

src/buffer/out/ut_textbuffer/TextBuffer.Unit.Tests.vcxproj

@@ -14,6 +14,7 @@
     <ClCompile Include="ReflowTests.cpp" />
     <ClCompile Include="TextColorTests.cpp" />
     <ClCompile Include="TextAttributeTests.cpp" />
+    <ClCompile Include="UTextAdapterTests.cpp" />
     <ClCompile Include="precomp.cpp">
       <PrecompiledHeader>Create</PrecompiledHeader>
     </ClCompile>
@@ -41,4 +42,4 @@
   <Import Project="$(SolutionDir)src\common.build.post.props" />
   <Import Project="$(SolutionDir)src\common.build.tests.props" />
   <Import Project="$(SolutionDir)src\common.nugetversions.targets" />
-</Project>
+</Project>

src/buffer/out/ut_textbuffer/UTextAdapterTests.cpp

@@ -0,0 +1,63 @@
+// Copyright (c) Microsoft Corporation.
+// Licensed under the MIT license.
+
+#include "precomp.h"
+
+#include "WexTestClass.h"
+#include "../textBuffer.hpp"
+#include "../../renderer/inc/DummyRenderer.hpp"
+
+template<>
+class WEX::TestExecution::VerifyOutputTraits<std::vector<til::point_span>>
+{
+public:
+    static WEX::Common::NoThrowString ToString(const std::vector<til::point_span>& vec)
+    {
+        WEX::Common::NoThrowString str;
+        str.Append(L"{ ");
+        for (size_t i = 0; i < vec.size(); ++i)
+        {
+            const auto& s = vec[i];
+            if (i != 0)
+            {
+                str.Append(L", ");
+            }
+            str.AppendFormat(L"{(%d, %d), (%d, %d)}", s.start.x, s.start.y, s.end.x, s.end.y);
+        }
+        str.Append(L" }");
+        return str;
+    }
+};
+
+class UTextAdapterTests
+{
+    TEST_CLASS(UTextAdapterTests);
+
+    TEST_METHOD(Unicode)
+    {
+        DummyRenderer renderer;
+        TextBuffer buffer{ til::size{ 24, 1 }, TextAttribute{}, 0, false, renderer };
+
+        RowWriteState state{
+            .text = L"abc 𝒶𝒷𝒸 abc ネコちゃん",
+        };
+        buffer.Write(0, TextAttribute{}, state);
+        VERIFY_IS_TRUE(state.text.empty());
+
+        static constexpr auto s = [](til::CoordType beg, til::CoordType end) -> til::point_span {
+            return { { beg, 0 }, { end, 0 } };
+        };
+
+        auto expected = std::vector{ s(0, 2), s(8, 10) };
+        auto actual = buffer.SearchText(L"abc", false);
+        VERIFY_ARE_EQUAL(expected, actual);
+
+        expected = std::vector{ s(5, 5) };
+        actual = buffer.SearchText(L"𝒷", false);
+        VERIFY_ARE_EQUAL(expected, actual);
+
+        expected = std::vector{ s(12, 15) };
+        actual = buffer.SearchText(L"ネコ", false);
+        VERIFY_ARE_EQUAL(expected, actual);
+    }
+};

src/buffer/out/ut_textbuffer/sources

@@ -17,6 +17,7 @@ SOURCES = \
     ReflowTests.cpp \
     TextColorTests.cpp \
     TextAttributeTests.cpp \
+    UTextAdapterTests.cpp \
     DefaultResource.rc \
 
 TARGETLIBS = \

src/cascadia/CascadiaPackage/Package-Can.appxmanifest

@@ -8,13 +8,14 @@
   xmlns:uap3="http://schemas.microsoft.com/appx/manifest/uap/windows10/3"
   xmlns:uap4="http://schemas.microsoft.com/appx/manifest/uap/windows10/4"
   xmlns:uap5="http://schemas.microsoft.com/appx/manifest/uap/windows10/5"
+  xmlns:uap17="http://schemas.microsoft.com/appx/manifest/uap/windows10/17"
   xmlns:desktop="http://schemas.microsoft.com/appx/manifest/desktop/windows10"
   xmlns:desktop4="http://schemas.microsoft.com/appx/manifest/desktop/windows10/4"
   xmlns:desktop5="http://schemas.microsoft.com/appx/manifest/desktop/windows10/5"
   xmlns:desktop6="http://schemas.microsoft.com/appx/manifest/desktop/windows10/6"
   xmlns:rescap="http://schemas.microsoft.com/appx/manifest/foundation/windows10/restrictedcapabilities"
   xmlns:virtualization="http://schemas.microsoft.com/appx/manifest/virtualization/windows10"
-  IgnorableNamespaces="uap mp rescap uap3 desktop6 virtualization">
+  IgnorableNamespaces="uap mp rescap uap3 uap17 desktop6 virtualization">
 
   <Identity
     Name="Microsoft.WindowsTerminalCanary"
@@ -33,6 +34,7 @@
         <virtualization:ExcludedKey>HKEY_CURRENT_USER\Console\%%Startup</virtualization:ExcludedKey>
       </virtualization:ExcludedKeys>
     </virtualization:RegistryWriteVirtualization>
+    <uap17:UpdateWhileInUse>defer</uap17:UpdateWhileInUse>
   </Properties>
 
   <Dependencies>

src/cascadia/CascadiaPackage/Package-Dev.appxmanifest

@@ -7,6 +7,7 @@
   xmlns:uap="http://schemas.microsoft.com/appx/manifest/uap/windows10"
   xmlns:uap3="http://schemas.microsoft.com/appx/manifest/uap/windows10/3"
   xmlns:uap4="http://schemas.microsoft.com/appx/manifest/uap/windows10/4"
+  xmlns:uap17="http://schemas.microsoft.com/appx/manifest/uap/windows10/17"
   xmlns:desktop="http://schemas.microsoft.com/appx/manifest/desktop/windows10"
   xmlns:desktop4="http://schemas.microsoft.com/appx/manifest/desktop/windows10/4"
   xmlns:desktop5="http://schemas.microsoft.com/appx/manifest/desktop/windows10/5"
@@ -14,7 +15,7 @@
   xmlns:rescap="http://schemas.microsoft.com/appx/manifest/foundation/windows10/restrictedcapabilities"
   xmlns:virtualization="http://schemas.microsoft.com/appx/manifest/virtualization/windows10"
   xmlns:uap5="http://schemas.microsoft.com/appx/manifest/uap/windows10/5"
-  IgnorableNamespaces="uap mp rescap uap3 desktop6 virtualization">
+  IgnorableNamespaces="uap mp rescap uap3 uap17 desktop6 virtualization">
 
   <Identity
     Name="WindowsTerminalDev"
@@ -33,6 +34,7 @@
         <virtualization:ExcludedKey>HKEY_CURRENT_USER\Console\%%Startup</virtualization:ExcludedKey>
       </virtualization:ExcludedKeys>
     </virtualization:RegistryWriteVirtualization>
+    <uap17:UpdateWhileInUse>defer</uap17:UpdateWhileInUse>
   </Properties>
 
   <Dependencies>

src/cascadia/CascadiaPackage/Package-Pre.appxmanifest

@@ -9,13 +9,14 @@
   xmlns:uap4="http://schemas.microsoft.com/appx/manifest/uap/windows10/4"
   xmlns:uap5="http://schemas.microsoft.com/appx/manifest/uap/windows10/5"
   xmlns:uap7="http://schemas.microsoft.com/appx/manifest/uap/windows10/7"
+  xmlns:uap17="http://schemas.microsoft.com/appx/manifest/uap/windows10/17"
   xmlns:desktop="http://schemas.microsoft.com/appx/manifest/desktop/windows10"
   xmlns:desktop4="http://schemas.microsoft.com/appx/manifest/desktop/windows10/4"
   xmlns:desktop5="http://schemas.microsoft.com/appx/manifest/desktop/windows10/5"
   xmlns:desktop6="http://schemas.microsoft.com/appx/manifest/desktop/windows10/6"
   xmlns:rescap="http://schemas.microsoft.com/appx/manifest/foundation/windows10/restrictedcapabilities"
   xmlns:virtualization="http://schemas.microsoft.com/appx/manifest/virtualization/windows10"
-  IgnorableNamespaces="uap mp rescap uap3 desktop6 virtualization">
+  IgnorableNamespaces="uap mp rescap uap3 uap17 desktop6 virtualization">
 
   <Identity
     Name="Microsoft.WindowsTerminalPreview"
@@ -34,6 +35,7 @@
         <virtualization:ExcludedKey>HKEY_CURRENT_USER\Console\%%Startup</virtualization:ExcludedKey>
       </virtualization:ExcludedKeys>
     </virtualization:RegistryWriteVirtualization>
+    <uap17:UpdateWhileInUse>defer</uap17:UpdateWhileInUse>
   </Properties>
 
   <Dependencies>

src/cascadia/CascadiaPackage/Package.appxmanifest

@@ -9,13 +9,14 @@
   xmlns:uap4="http://schemas.microsoft.com/appx/manifest/uap/windows10/4"
   xmlns:uap5="http://schemas.microsoft.com/appx/manifest/uap/windows10/5"
   xmlns:uap7="http://schemas.microsoft.com/appx/manifest/uap/windows10/7"
+  xmlns:uap17="http://schemas.microsoft.com/appx/manifest/uap/windows10/17"
   xmlns:desktop="http://schemas.microsoft.com/appx/manifest/desktop/windows10"
   xmlns:desktop4="http://schemas.microsoft.com/appx/manifest/desktop/windows10/4"
   xmlns:desktop5="http://schemas.microsoft.com/appx/manifest/desktop/windows10/5"
   xmlns:desktop6="http://schemas.microsoft.com/appx/manifest/desktop/windows10/6"
   xmlns:rescap="http://schemas.microsoft.com/appx/manifest/foundation/windows10/restrictedcapabilities"
   xmlns:virtualization="http://schemas.microsoft.com/appx/manifest/virtualization/windows10"
-  IgnorableNamespaces="uap mp rescap uap3 desktop6 virtualization">
+  IgnorableNamespaces="uap mp rescap uap3 uap17 desktop6 virtualization">
 
   <Identity
     Name="Microsoft.WindowsTerminal"
@@ -34,6 +35,7 @@
         <virtualization:ExcludedKey>HKEY_CURRENT_USER\Console\%%Startup</virtualization:ExcludedKey>
       </virtualization:ExcludedKeys>
     </virtualization:RegistryWriteVirtualization>
+    <uap17:UpdateWhileInUse>defer</uap17:UpdateWhileInUse>
   </Properties>
 
   <Dependencies>

src/cascadia/CascadiaPackage/Resources/af-ZA/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminaal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminale Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Terminaalvoorskou</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows-terminaal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows-terminaal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windows-terminaalvoorskou</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminaal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminale Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Terminaalvoorskou</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Die nuwe Windows-terminaal</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows-terminaal met ’n voorskou van opkomende kenmerke</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Maak oop in Terminaal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Maak oop in &amp;Terminaalvoorskou</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Maak oop in &amp;Terminaal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/am-ET/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>ተረሚናል</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>የተርሚናል ቅድመ ዕይታ</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>የ Windows መቆጣጠሪያ</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>የ Windows መቆጣጠሪያ ቅድመ-እይታ</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>ተረሚናል</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>የተርሚናል ቅድመ ዕይታ</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>አድሱ Windows መቆጣጠሪያ ገጽ</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>የ Windows መቆጣጠሪያ ገጽ ከመጪ ባህሪያት ቅድመ እይታ ጋር</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Terminal (&amp;Canary) ውስጥ ክፈት</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>በተርሚናል &amp;ቅድመ ዕይታ ውስጥ ይክፈቱ</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>በ&amp;ተርሚናል ውስጥ ይክፈቱ</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/ar-SA/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>الوحدة الطرفية</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>إصدار Canary للوحدة الطرفية</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>معاينة الوحدة الطرفية</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>وحدة طرفية لـ Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>إصدار Canary للوحدة الطرفية لـ Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>معاينة وحدة طرفية لـ Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>الوحدة الطرفية</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>إصدار Canary للوحدة الطرفية</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>معاينة الوحدة الطرفية</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>الوحدة الطرفية لـ Windows الجديدة</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>وحدة طرفية لـ Windows مع معاينة للميزات القادمة</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>فتح في الوحدة الطرفية (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>فتح في "&amp;معاينة الوحدة الطرفية"</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>فتح في &amp;الوحدة الطرفية</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/as-IN/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>টাৰ্মিনেল</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>টাৰ্মিনেল কেনাৰী</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>টাৰ্মিনেল পূৰ্বলোকন</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows টাৰ্মিনেল</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows টাৰ্মিনেল কেনাৰী</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windows টাৰ্মিনেল পূৰ্বলোকন</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>টাৰ্মিনেল</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>টাৰ্মিনেল কেনাৰী</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>টাৰ্মিনেল পূৰ্বলোকন</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>নতুন Windows টাৰ্মিনেল</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>আগন্তুক সুবিধাসমূহৰ পূৰ্বলোকনৰ সৈতে Windows টাৰ্মিনেল</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>টাৰ্মিনেল (&amp;কেনাৰী)-ত খোলক</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>টাৰ্মিনেল &amp;পূৰ্বলোকনত খোলক</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>&amp;টাৰ্মিনেলত খোলক</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/az-Latn-AZ/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Xəbərçi</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Terminala Önbaxış</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows Terminal Xəbərçi</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windows Terminala Önbaxış</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Xəbərçi</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Terminala Önbaxış</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Yeni Windows Terminalı</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Gözlənilən xüsusiyyətlərin önbaxışı ilə Windows Terminalı</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Terminalda açın (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Terminalın &amp;Önbaxış versiyasında açın</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>&amp;Terminalda açın</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/bg-BG/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Терминал</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Терминал Канарче</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Предварителен преглед на терминал</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Терминал на Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Терминал (Канарче) на Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>визуализация на Терминал на Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Терминал</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Терминал Канарче</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Предварителен преглед на терминал</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Новият терминал на Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Терминал на Windows с предварителен преглед на предстоящите функции</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Отваряне в Терминал (&amp;Канарче)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Отваряне в "Терминал" &amp;предварителен преглед</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Отваряне в &amp;"Терминал"</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/bn-IN/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>টার্মিনাল</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>টার্মিনাল ক্যানারি</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>টার্মিনাল-এর পূর্বরূপ</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows টার্মিনাল</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows টার্মিনাল ক্যানারি</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windows টার্মিনাল প্রিভিউ</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>টার্মিনাল</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>টার্মিনাল ক্যানারি</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>টার্মিনাল-এর পূর্বরূপ</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>নতুন Windows টার্মিনাল</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>আসন্ন বৈশিষ্ট্যগুলির পূর্বরূপ সহ Windows টার্মিনাল</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>টার্মিনালে খুলুন (&amp;ক্যানারি)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>টার্মিনাল &amp;প্রাকদর্শন-এ খুলুন</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>&amp;টার্মিনাল-এ খুলুন</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/bs-Latn-BA/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Kontrolna vrijednost terminala</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Pregled terminala</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Kontrolna vrijednost usluge Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Verzija za pregled aplikacije Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Kontrolna vrijednost terminala</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Pregled terminala</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Novi Windows terminal</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows terminal sa pregledom predstojećih funkcija</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Otvori u Terminalu (&amp;Kontrolna vrijednost)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Otvori u verziji za &amp;pregled aplikacije Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Otvori u aplikaciji T&amp;erminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/ca-ES/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Visualització prèvia del Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terminal del Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Terminal Canary del Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Versió preliminar del Terminal del Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Visualització prèvia del Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>El nou Terminal del Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terminal del Windows amb una visualització prèvia de les pròximes característiques</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Obrir al terminal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Obrir a la visualització &amp;prèvia del terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Obrir al &amp;terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/ca-Es-VALENCIA/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Visualització prèvia del Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terminal del Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Terminal Canary del Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Visualització prèvia del Terminal del Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Visualització prèvia del Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>El nou Terminal del Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terminal del Windows amb una visualització prèvia de les pròximes característiques</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Obri-ho en el Terminal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Obri-ho en la &amp;visualització prèvia del Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Obri-ho en el &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/cs-CZ/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminál</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Testovací hodnota Terminálu</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Náhled terminálu</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terminál Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Testovací hodnota Terminálu Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Terminál Windows Preview</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminál</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Testovací hodnota Terminálu</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Náhled terminálu</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Nová Terminál Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terminál Windows s náhledem připravovaných funkcí</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Otevřít v Terminálu (&amp;testovací hodnota)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Otevřít náhled &amp;aplikace Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Otevřít v aplikaci &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/cy-GB/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terfynell</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terfynell Caneri</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Rhagolwg Terfynell</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terfynell Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Terfynell Windows Caneri</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Rhagolwg Terfynell Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terfynell</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terfynell Caneri</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Rhagolwg Terfynell</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Y Derfynell Windows Newydd</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terfynell Windows gyda rhagolwg o nodweddion i ddod</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Agor mewn Terfynell (&amp;Caneri)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Agor yn y &amp;Rhagowlg Terfynell</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Agor yn y &amp;Derfynell</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/da-DK/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal kontrolværdi</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Forhåndsvisning af Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows Terminal kontrolværdi</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Forhåndsvisning af Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal kontrolværdi</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Forhåndsvisning af Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Den nye Windows Terminal</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows Terminal med en forhåndsvisning af kommende funktioner</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Åbn i Terminal (&amp;Kontrolværdi)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Åbn i Terminal &amp;Forhåndsvisning</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Åbn i &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/de-DE/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Terminal-Vorschau</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows-Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows-Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Vorschau auf Windows-Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Terminal-Vorschau</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Das neue Windows-Terminal</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows-Terminal mit einer Vorschau auf bevorstehende Features</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Im Terminal öffnen (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>In Terminal &amp; Vorschau öffnen</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>In &amp;Terminal öffnen</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/el-GR/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Τερματικό</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Τιμή ελέγχου τερματικού</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Προεπισκόπηση τερματικού</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Τερματικό Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Τιμή ελέγχου τερματικού Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Προεπισκόπηση τερματικού των Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Τερματικό</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Τιμή ελέγχου τερματικού</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Προεπισκόπηση τερματικού</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Το Νέο Τερματικό Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Τερματικό Windows με μια προεπισκόπηση των επερχόμενων δυνατοτήτων</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Άνοιγμα σε τερματικό (&amp;τιμή ελέγχου)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Άνοιγμα σε τερματικό &amp;Προεπισκόπηση</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Άνοιγμα στο &amp;Τερματικό</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/en-GB/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Terminal Preview</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windows Terminal Preview</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Terminal Preview</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>The New Windows Terminal</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows Terminal with a preview of forthcoming features</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Open in Terminal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Open in Terminal &amp;Preview</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Open in &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/en-US/Resources.resw

@@ -1,4 +1,4 @@
-<?xml version="1.0" encoding="utf-8"?>
+<?xml version="1.0" encoding="utf-8"?>
 <root>
   <!-- 
     Microsoft ResX Schema 
@@ -119,59 +119,58 @@
   </resheader>
   <data name="AppName" xml:space="preserve">
     <value>Terminal</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppNameDev" xml:space="preserve">
     <value>Terminal Dev</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked} The dev build will never be seen in multiple languages</comment>
   </data>
   <data name="AppNameCan" xml:space="preserve">
     <value>Terminal Canary</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppNamePre" xml:space="preserve">
     <value>Terminal Preview</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppStoreName" xml:space="preserve">
     <value>Windows Terminal</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppStoreNameDev" xml:space="preserve">
     <value>Windows Terminal Dev</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked} The dev build will never be seen in multiple languages</comment>
   </data>
   <data name="AppStoreNameCan" xml:space="preserve">
     <value>Windows Terminal Canary</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
   </data>
   <data name="AppStoreNamePre" xml:space="preserve">
     <value>Windows Terminal Preview</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppShortName" xml:space="preserve">
     <value>Terminal</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppShortNameDev" xml:space="preserve">
     <value>Terminal Dev</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked} The dev build will never be seen in multiple languages</comment>
   </data>
   <data name="AppShortNameCan" xml:space="preserve">
     <value>Terminal Canary</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppShortNamePre" xml:space="preserve">
     <value>Terminal Preview</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
   </data>
   <data name="AppDescription" xml:space="preserve">
     <value>The New Windows Terminal</value>
-    <comment>{Locked}</comment>
   </data>
   <data name="AppDescriptionDev" xml:space="preserve">
     <value>The Windows Terminal, but Unofficial</value>
-    <comment>{Locked}</comment>
+    <comment>{Locked} The dev build will never be seen in multiple languages</comment>
   </data>
   <data name="AppDescriptionCan" xml:space="preserve">
     <value>The Windows Terminal (Canary build)</value>
@@ -179,6 +178,21 @@
   </data>
   <data name="AppDescriptionPre" xml:space="preserve">
     <value>Windows Terminal with a preview of upcoming features</value>
-    <comment>{Locked}</comment>
   </data>
-</root>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Dev" xml:space="preserve">
+    <value>Open in Terminal (&amp;Dev)</value>
+    <comment>{Locked} The dev build will never be seen in multiple languages</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Open in Terminal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Open in Terminal &amp;Preview</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Open in &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/es-ES/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Vista previa de Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Terminal Windows Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Vista previa de Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Vista previa de Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>La nueva Terminal Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terminal Windows con una vista previa de las características futuras</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Abrir en Terminal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Abrir en la versión preliminar de &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Abrir en &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/es-MX/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Vista previa de Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Terminal Windows Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Vista previa de Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Vista previa de Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>La nueva Terminal Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terminal Windows con una vista previa de las características futuras</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Abrir en Terminal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Abrir en la versión preliminar de &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Abrir en &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/et-EE/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminali valvurparameeter</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Terminali eelversioon</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windowsi terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windowsi terminali valvurparameeter</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windowsi terminali eelvaade</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminali valvurparameeter</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Terminali eelversioon</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Uus Windowsi terminal</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windowsi terminal tulevaste funktsioonide eeltutvustusega</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Ava terminalis (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Ava terminali &amp;eelvaates</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Ava &amp;terminalis</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/eu-ES/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminala</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Terminalaren ikuspegia</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows terminala</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windows terminalaren aurrebista</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminala</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Terminalaren ikuspegia</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Windows terminal berria</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows terminala laster eskuragarri egongo diren eginbideen aurrebistarekin</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Ireki Terminal-en (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Ireki terminalaren &amp;ikuspegian</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Ireki &amp;terminalean</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/fa-IR/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>پایانه</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Canary پایانه</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>پیش‌نمایش پایانه</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>پایانه Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Canary پایانه Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>پیش‌نمایش پایانه Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>پایانه</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Canary پایانه</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>پیش‌نمایش پایانه</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>پایانه Windows جدید</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>پایانه Windows با پیش‌نمایش ویژگی‌های آتی</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>باز کردن در پایانه (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>باز کردن در پایانه &amp;پیش‌نمایش</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>باز کردن در &amp;پایانه</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/fi-FI/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Pääte</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Pääte (Canary)</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Pääteesikatselu</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows-pääte</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows-pääte (Canary)</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Windows-päätteen esiversio</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Pääte</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Pääte (Canary)</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Pääteesikatselu</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Uusi Windows-pääte</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows-pääte ja tulevien ominaisuuksien esikatselu</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Avaa Päätteessä (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Avaa Päätteen &amp;esikatselussa</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Avaa &amp;Päätteessä</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/fil-PH/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Preview ng Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Windows Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Preview ng Windows Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Terminal Canary</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Preview ng Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Ang Bagong Windows Terminal</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Windows Terminal na may preview ng mga paparating na tampok</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Buksan sa Terminal (&amp;Canary)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Buksan sa Terminal &amp;Preview</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Buksan sa &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/fr-CA/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Contrôle de validité du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Aperçu du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Contrôle de validité Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Aperçu du Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Contrôle de validité du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Aperçu du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Nouveau Terminal Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terminal Windows avec un aperçu des fonctionnalités à venir</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Ouvrir dans le terminal (&amp;contrôle de validité)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Ouvrir dans la &amp;préversion du Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Ouvrir dans le &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>

src/cascadia/CascadiaPackage/Resources/fr-FR/Resources.resw

@@ -0,0 +1,174 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNameCan" xml:space="preserve">
+    <value>Contrôle de validité du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppNamePre" xml:space="preserve">
+    <value>Aperçu du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreName" xml:space="preserve">
+    <value>Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppStoreNameCan" xml:space="preserve">
+    <value>Contrôle de validité Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}. "Canary" in this context means an unstable or nightly build of a software product, not the bird.</comment>
+  </data>
+  <data name="AppStoreNamePre" xml:space="preserve">
+    <value>Aperçu du Terminal Windows</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortName" xml:space="preserve">
+    <value>Terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNameCan" xml:space="preserve">
+    <value>Contrôle de validité du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppShortNamePre" xml:space="preserve">
+    <value>Aperçu du terminal</value>
+    <comment>{Locked=qps-ploc,qps-ploca,qps-plocm}</comment>
+  </data>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Nouveau terminal Windows</value>
+  </data>
+  <data name="AppDescriptionPre" xml:space="preserve">
+    <value>Terminal Windows avec un aperçu des fonctionnalités à venir</value>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Canary" xml:space="preserve">
+    <value>Ouvrir dans le terminal (&amp;contrôle de validité)</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Canary version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem_Preview" xml:space="preserve">
+    <value>Ouvrir dans la &amp;préversion du Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the Preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+  <data name="ShellExtension_OpenInTerminalMenuItem" xml:space="preserve">
+    <value>Ouvrir dans le &amp;Terminal</value>
+    <comment>This is a menu item that will be displayed in the Windows File Explorer that launches the non-preview version of Windows Terminal. Please mark one of the characters to be an accelerator key.</comment>
+  </data>
+</root>