Migrate spelling-0.0.21 changes from main

This repository tends to use `/`s in branch names.
Unfortunately, `branch: "*"` at present only matches a single
level, which means it would match a branch named `foo` but not `bar/foo`.

Given that I don't think this repository is actively using tags,
and given that the general cost for the spell checker isn't particularly
high, it's better to remove the filtering so that all branches get
checked.

Worst case, a branch that is also tagged and has spelling errors
will get two comments complaining about those spelling errors.

.github/actions/spelling/README.md

@@ -0,0 +1,15 @@
+# check-spelling/check-spelling configuration
+
+File | Purpose | Format | Info
+-|-|-|-
+[allow/*.txt](allow/) | Add words to the dictionary | one word per line (only letters and `'`s allowed) | [allow](https://github.com/check-spelling/check-spelling/wiki/Configuration#allow)
+[reject.txt](reject.txt) | Remove words from the dictionary (after allow) | grep pattern matching whole dictionary words | [reject](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-reject)
+[excludes.txt](excludes.txt) | Files to ignore entirely | perl regular expression | [excludes](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-excludes)
+[patterns/*.txt](patterns/) | Patterns to ignore from checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
+[candidate.patterns](candidate.patterns) | Patterns that might be worth adding to [patterns.txt](patterns.txt) | perl regular expression with optional comment block introductions (all matches will be suggested) | [candidates](https://github.com/check-spelling/check-spelling/wiki/Feature:-Suggest-patterns)
+[line_forbidden.patterns](line_forbidden.patterns) | Patterns to flag in checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
+[expect/*.txt](expect.txt) | Expected words that aren't in the dictionary | one word per line (sorted, alphabetically) | [expect](https://github.com/check-spelling/check-spelling/wiki/Configuration#expect)
+[advice.md](advice.md) | Supplement for GitHub comment when unrecognized words are found | GitHub Markdown | [advice](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice)
+
+Note: you can replace any of these files with a directory by the same name (minus the suffix)
+and then include multiple files inside that directory (with that suffix) to merge multiple files together.

.github/actions/spelling/advice.md

@@ -0,0 +1,48 @@
+<!-- See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice --> <!-- markdownlint-disable MD033 MD041 -->
+<details>
+<summary>
+:pencil2: Contributor please read this
+</summary>
+
+By default the command suggestion will generate a file named based on your commit. That's generally ok as long as you add the file to your commit. Someone can reorganize it later.
+
+:warning: The command is written for posix shells. If it doesn't work for you, you can manually _add_ (one word per line) / _remove_ items to `expect.txt` and the `excludes.txt` files.
+
+If the listed items are:
+
+* ... **misspelled**, then please *correct* them instead of using the command.
+* ... *names*, please add them to `.github/actions/spelling/allow/names.txt`.
+* ... APIs, you can add them to a file in `.github/actions/spelling/allow/`.
+* ... just things you're using, please add them to an appropriate file in `.github/actions/spelling/expect/`.
+* ... tokens you only need in one place and shouldn't *generally be used*, you can add an item in an appropriate file in `.github/actions/spelling/patterns/`.
+
+See the `README.md` in each directory for more information.
+
+:microscope: You can test your commits **without** *appending* to a PR by creating a new branch with that extra change and pushing it to your fork. The [check-spelling](https://github.com/marketplace/actions/check-spelling) action will run in response to your **push** -- it doesn't require an open pull request. By using such a branch, you can limit the number of typos your peers see you make. :wink:
+
+
+<details><summary>If the flagged items are :exploding_head: false positives</summary>
+
+If items relate to a ...
+* binary file (or some other file you wouldn't want to check at all).
+
+  Please add a file path to the `excludes.txt` file matching the containing file.
+
+  File paths are Perl 5 Regular Expressions - you can [test](
+https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your files.
+
+  `^` refers to the file's path from the root of the repository, so `^README\.md$` would exclude [README.md](
+../tree/HEAD/README.md) (on whichever branch you're using).
+
+* well-formed pattern.
+
+  If you can write a [pattern](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns) that would match it,
+  try adding it to the `patterns.txt` file.
+
+  Patterns are Perl 5 Regular Expressions - you can [test](
+https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your lines.
+
+  Note that patterns can't match multiline strings.
+</details>
+
+</details>

.github/actions/spelling/allow/README.md

@@ -0,0 +1,21 @@
+# Allow files are lists of words to accept unconditionally
+
+While check spelling will complain about an expected word
+which is no longer present, you can include things here even if
+they are not otherwise present in the repository.
+
+E.g., you could include a list of system APIs here, or potential
+contributors (so that if a future commit includes their name,
+it'll be accepted).
+
+## Files
+
+| File | Description |
+| ---- | ----------- |
+| [Allow](allow.txt) | Supplements to the dictionary |
+| [Chinese](chinese.txt) | Chinese words |
+| [Japanese](japanese.txt) | Japanese words |
+| [Microsoft](microsoft.txt) | Microsoft brand items |
+| [Fonts](fonts.txt) | Font names |
+| [Names](names.txt) | Names of people |
+| [Colors](colors.txt) | Names of color |

.github/actions/spelling/allow/allow.txt

@@ -0,0 +1,108 @@
+admins
+allcolors
+Apc
+apc
+breadcrumb
+breadcrumbs
+bsd
+calt
+ccmp
+changelog
+clickable
+clig
+CMMI
+copyable
+cybersecurity
+dalet
+Dcs
+dcs
+dialytika
+dje
+downside
+downsides
+dze
+dzhe
+EDDB
+EDDC
+Enum'd
+Fitt
+formattings
+FTCS
+ftp
+fvar
+gantt
+gcc
+geeksforgeeks
+ghe
+github
+gje
+godbolt
+hostname
+hostnames
+https
+hyperlink
+hyperlinking
+hyperlinks
+iconify
+img
+inlined
+It'd
+kje
+libfuzzer
+libuv
+liga
+lje
+Llast
+llvm
+Lmid
+locl
+lol
+lorem
+Lorigin
+maxed
+minimalistic
+mkmk
+mnt
+mru
+nje
+noreply
+ogonek
+ok'd
+overlined
+pipeline
+postmodern
+ptys
+qof
+qps
+rclt
+reimplementation
+reserialization
+reserialize
+reserializes
+rlig
+runtimes
+shcha
+slnt
+Sos
+ssh
+timeline
+timelines
+timestamped
+TLDR
+tokenizes
+tonos
+toolset
+tshe
+ubuntu
+uiatextrange
+UIs
+und
+unregister
+versioned
+vsdevcmd
+We'd
+wildcards
+XBox
+YBox
+yeru
+zhe

.github/actions/spelling/allow/apis.txt

@@ -0,0 +1,248 @@
+ACCEPTFILES
+ACCESSDENIED
+acl
+aclapi
+alignas
+alignof
+APPLYTOSUBMENUS
+appxrecipe
+bitfield
+bitfields
+BUILDBRANCH
+BUILDMSG
+BUILDNUMBER
+BYCOMMAND
+BYPOSITION
+charconv
+CLASSNOTAVAILABLE
+CLOSEAPP
+cmdletbinding
+COLORPROPERTY
+colspan
+COMDLG
+commandlinetoargv
+comparand
+cstdint
+CXICON
+CYICON
+Dacl
+dataobject
+dcomp
+DERR
+dlldata
+DNE
+DONTADDTORECENT
+DWMSBT
+DWMWA
+DWMWA
+DWORDLONG
+endfor
+ENDSESSION
+enumset
+environstrings
+EXPCMDFLAGS
+EXPCMDSTATE
+filetime
+FILTERSPEC
+FORCEFILESYSTEM
+FORCEMINIMIZE
+frac
+fullkbd
+futex
+GETDESKWALLPAPER
+GETHIGHCONTRAST
+GETMOUSEHOVERTIME
+Hashtable
+HIGHCONTRASTON
+HIGHCONTRASTW
+hotkeys
+href
+hrgn
+HTCLOSE
+hwinsta
+HWINSTA
+IActivation
+IApp
+IAppearance
+IAsync
+IBind
+IBox
+IClass
+IComparable
+IComparer
+IConnection
+ICustom
+IDialog
+IDirect
+IExplorer
+IFACEMETHOD
+IFile
+IGraphics
+IInheritable
+IMap
+IMonarch
+IObject
+iosfwd
+IPackage
+IPeasant
+ISetup
+isspace
+IStorage
+istream
+IStringable
+ITab
+ITaskbar
+itow
+IUri
+IVirtual
+KEYSELECT
+LCID
+llabs
+llu
+localtime
+lround
+Lsa
+lsass
+LSHIFT
+LTGRAY
+MAINWINDOW
+memchr
+memicmp
+MENUCOMMAND
+MENUDATA
+MENUINFO
+MENUITEMINFOW
+mmeapi
+MOUSELEAVE
+mov
+mptt
+msappx
+MULTIPLEUSE
+NCHITTEST
+NCLBUTTONDBLCLK
+NCMOUSELEAVE
+NCMOUSEMOVE
+NCRBUTTONDBLCLK
+NIF
+NIN
+NOAGGREGATION
+NOASYNC
+NOCHANGEDIR
+NOPROGRESS
+NOREDIRECTIONBITMAP
+NOREPEAT
+NOTIFYBYPOS
+NOTIFYICON
+NOTIFYICONDATA
+ntprivapi
+oaidl
+ocidl
+ODR
+offsetof
+ofstream
+onefuzz
+osver
+OSVERSIONINFOEXW
+otms
+OUTLINETEXTMETRICW
+overridable
+PACL
+PAGESCROLL
+PATINVERT
+PEXPLICIT
+PICKFOLDERS
+pmr
+ptstr
+QUERYENDSESSION
+rcx
+REGCLS
+RETURNCMD
+rfind
+ROOTOWNER
+roundf
+RSHIFT
+SACL
+schandle
+semver
+serializer
+SETVERSION
+SHELLEXECUTEINFOW
+shobjidl
+SHOWHIDE
+SHOWMINIMIZED
+SHOWTIP
+SINGLEUSE
+SIZENS
+smoothstep
+snprintf
+spsc
+sregex
+SRWLOC
+SRWLOCK
+STDCPP
+STDMETHOD
+strchr
+strcpy
+streambuf
+strtoul
+Stubless
+Subheader
+Subpage
+syscall
+SYSTEMBACKDROP
+TABROW
+TASKBARCREATED
+TBPF
+THEMECHANGED
+tlg
+TME
+tmp
+tmpdir
+tolower
+toupper
+TRACKMOUSEEVENT
+TTask
+TVal
+UChar
+UFIELD
+ULARGE
+UOI
+UPDATEINIFILE
+userenv
+USEROBJECTFLAGS
+Viewbox
+virtualalloc
+wcsstr
+wcstoui
+winmain
+winsta
+winstamin
+wmemcmp
+wpc
+WSF
+wsregex
+wwinmain
+xchg
+XDocument
+XElement
+xfacet
+xhash
+XIcon
+xiosbase
+xlocale
+xlocbuf
+xlocinfo
+xlocmes
+xlocmon
+xlocnum
+xloctime
+XMax
+xmemory
+XParse
+xpath
+xstddef
+xstring
+xtree
+xutility
+YIcon
+YMax

.github/actions/spelling/allow/chinese.txt

@@ -0,0 +1,5 @@
+CHINESEBIG
+choseong
+Jongseong
+Jungseong
+ssangtikeut

.github/actions/spelling/allow/colors.txt

@@ -0,0 +1,117 @@
+alice
+aliceblue
+antiquewhite
+blanchedalmond
+blueviolet
+burlywood
+cadetblue
+cornflowerblue
+cornsilk
+cyan
+darkblue
+darkcyan
+darkgoldenrod
+darkgray
+darkgreen
+darkgrey
+darkkhaki
+darkmagenta
+darkolivegreen
+darkorange
+darkorchid
+darkred
+darksalmon
+darkseagreen
+darkslateblue
+darkslategray
+darkslategrey
+darkturquoise
+darkviolet
+deeppink
+deepskyblue
+dimgray
+dimgrey
+dodgerblue
+firebrick
+floralwhite
+forestgreen
+gainsboro
+ghostwhite
+greenyellow
+hotpink
+indian
+indianred
+lavenderblush
+lawngreen
+lemonchiffon
+lightblue
+lightcoral
+lightcyan
+lightgoldenrod
+lightgoldenrodyellow
+lightgray
+lightgreen
+lightgrey
+lightpink
+lightsalmon
+lightseagreen
+lightskyblue
+lightslateblue
+lightslategray
+lightslategrey
+lightsteelblue
+lightyellow
+limegreen
+mediumaquamarine
+mediumblue
+mediumorchid
+mediumpurple
+mediumseagreen
+mediumslateblue
+mediumspringgreen
+mediumturquoise
+mediumvioletred
+midnightblue
+mintcream
+mistyrose
+navajo
+navajowhite
+navyblue
+oldlace
+olivedrab
+orangered
+palegoldenrod
+palegreen
+paleturquoise
+palevioletred
+papayawhip
+peachpuff
+peru
+powderblue
+rebecca
+rebeccapurple
+rosybrown
+royalblue
+saddlebrown
+sandybrown
+seagreen
+sienna
+skyblue
+slateblue
+slategray
+slategrey
+springgreen
+steelblue
+violetred
+webgray
+webgreen
+webgrey
+webmaroon
+webpurple
+whitesmoke
+xaroon
+xray
+xreen
+xrey
+xurple
+yellowgreen

.github/actions/spelling/allow/fonts.txt

@@ -0,0 +1,10 @@
+Consolas
+emoji
+emojis
+Extralight
+Gabriola
+Iosevka
+MDL
+Monofur
+Segoe
+wght

.github/actions/spelling/allow/japanese.txt

@@ -0,0 +1,4 @@
+arigatoo
+doomo
+Kaomojis
+TATEGAKI

.github/actions/spelling/allow/math.txt

@@ -0,0 +1,11 @@
+atan
+CPrime
+HBar
+HPrime
+isnan
+LPrime
+LStep
+powf
+RSub
+sqrtf
+ULP

.github/actions/spelling/allow/microsoft.txt

@@ -0,0 +1,85 @@
+ACLs
+ADMINS
+advapi
+altform
+altforms
+appendwttlogging
+appx
+appxbundle
+appxerror
+appxmanifest
+ATL
+backplating
+bitmaps
+BOMs
+CPLs
+cpptools
+cppvsdbg
+CPRs
+cryptbase
+DACL
+DACLs
+defaultlib
+diffs
+disposables
+dotnetfeed
+DTDs
+DWINRT
+enablewttlogging
+Intelli
+IVisual
+libucrt
+libucrtd
+LKG
+LOCKFILE
+Lxss
+mfcribbon
+microsoft
+microsoftonline
+MSAA
+msixbundle
+MSVC
+MSVCP
+muxc
+netcore
+Onefuzz
+osgvsowi
+PFILETIME
+pgc
+pgo
+pgosweep
+powerrename
+powershell
+propkey
+pscustomobject
+QWORD
+regedit
+robocopy
+SACLs
+sdkddkver
+Shobjidl
+Skype
+SRW
+sxs
+Sysinternals
+sysnative
+systemroot
+taskkill
+tasklist
+tdbuildteamid
+ucrt
+ucrtd
+unvirtualized
+VCRT
+vcruntime
+Virtualization
+visualstudio
+vscode
+VSTHRD
+winsdkver
+wlk
+wslpath
+wtl
+wtt
+wttlog
+Xamarin

.github/actions/spelling/allow/names.txt

@@ -0,0 +1,91 @@
+Anup
+austdi
+arkthur
+Ballmer
+bhoj
+Bhojwani
+Bluloco
+carlos
+dhowett
+Diviness
+dsafa
+duhowett
+DXP
+ekg
+eryksun
+ethanschoonover
+Firefox
+Gatta
+glsl
+Gravell
+Grie
+Griese
+Hernan
+Howett
+Illhardt
+iquilezles
+italo
+jantari
+jerrysh
+Kaiyu
+kimwalisch
+KMehrain
+KODELIFE
+Kodelife
+Kourosh
+kowalczyk
+leonmsft
+Lepilleur
+lhecker
+lukesampson
+Macbook
+Manandhar
+masserano
+mbadolato
+Mehrain
+menger
+mgravell
+michaelniksa
+michkap
+migrie
+mikegr
+mikemaccana
+miloush
+miniksa
+niksa
+nvaccess
+nvda
+oising
+oldnewthing
+opengl
+osgwiki
+pabhojwa
+panos
+paulcam
+pauldotknopf
+PGP
+Pham
+Rincewind
+rprichard
+Schoonover
+shadertoy
+Shomnipotence
+simioni
+Somuah
+sonph
+sonpham
+stakx
+talo
+thereses
+Walisch
+WDX
+Wellons
+Wirt
+Wojciech
+zadjii
+Zamor
+Zamora
+zamora
+Zoey
+zorio
+Zverovich

.github/actions/spelling/candidate.patterns

@@ -0,0 +1,523 @@
+# marker to ignore all code on line
+^.*/\* #no-spell-check-line \*/.*$
+# marker for ignoring a comment to the end of the line
+// #no-spell-check.*$
+
+# patch hunk comments
+^\@\@ -\d+(?:,\d+|) \+\d+(?:,\d+|) \@\@ .*
+# git index header
+index [0-9a-z]{7,40}\.\.[0-9a-z]{7,40}
+
+# cid urls
+(['"])cid:.*?\g{-1}
+
+# data url in parens
+\(data:[^)]*?(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})[^)]*\)
+# data url in quotes
+([`'"])data:.*?(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,}).*\g{-1}
+# data url
+data:[-a-zA-Z=;:/0-9+]*,\S*
+
+# mailto urls
+mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
+
+# magnet urls
+magnet:[?=:\w]+
+
+# magnet urls
+"magnet:[^"]+"
+
+# obs:
+"obs:[^"]*"
+
+# The `\b` here means a break, it's the fancy way to handle urls, but it makes things harder to read
+# In this examples content, I'm using a number of different ways to match things to show various approaches
+# asciinema
+\basciinema\.org/a/[0-9a-zA-Z]+
+
+# apple
+\bdeveloper\.apple\.com/[-\w?=/]+
+# Apple music
+\bembed\.music\.apple\.com/fr/playlist/usr-share/[-\w.]+
+
+# appveyor api
+\bci\.appveyor\.com/api/projects/status/[0-9a-z]+
+# appveyor project
+\bci\.appveyor\.com/project/(?:[^/\s"]*/){2}builds?/\d+/job/[0-9a-z]+
+
+# Amazon
+
+# Amazon
+\bamazon\.com/[-\w]+/(?:dp/[0-9A-Z]+|)
+# AWS S3
+\b\w*\.s3[^.]*\.amazonaws\.com/[-\w/&#%_?:=]*
+# AWS execute-api
+\b[0-9a-z]{10}\.execute-api\.[-0-9a-z]+\.amazonaws\.com\b
+# AWS ELB
+\b\w+\.[-0-9a-z]+\.elb\.amazonaws\.com\b
+# AWS SNS
+\bsns\.[-0-9a-z]+.amazonaws\.com/[-\w/&#%_?:=]*
+# AWS VPC
+vpc-\w+
+
+# While you could try to match `http://` and `https://` by using `s?` in `https?://`, sometimes there
+# YouTube url
+\b(?:(?:www\.|)youtube\.com|youtu.be)/(?:channel/|embed/|user/|playlist\?list=|watch\?v=|v/|)[-a-zA-Z0-9?&=_%]*
+# YouTube music
+\bmusic\.youtube\.com/youtubei/v1/browse(?:[?&]\w+=[-a-zA-Z0-9?&=_]*)
+# YouTube tag
+<\s*youtube\s+id=['"][-a-zA-Z0-9?_]*['"]
+# YouTube image
+\bimg\.youtube\.com/vi/[-a-zA-Z0-9?&=_]*
+# Google Accounts
+\baccounts.google.com/[-_/?=.:;+%&0-9a-zA-Z]*
+# Google Analytics
+\bgoogle-analytics\.com/collect.[-0-9a-zA-Z?%=&_.~]*
+# Google APIs
+\bgoogleapis\.(?:com|dev)/[a-z]+/(?:v\d+/|)[a-z]+/[-@:./?=\w+|&]+
+# Google Storage
+\b[-a-zA-Z0-9.]*\bstorage\d*\.googleapis\.com(?:/\S*|)
+# Google Calendar
+\bcalendar\.google\.com/calendar(?:/u/\d+|)/embed\?src=[@./?=\w&%]+
+\w+\@group\.calendar\.google\.com\b
+# Google DataStudio
+\bdatastudio\.google\.com/(?:(?:c/|)u/\d+/|)(?:embed/|)(?:open|reporting|datasources|s)/[-0-9a-zA-Z]+(?:/page/[-0-9a-zA-Z]+|)
+# The leading `/` here is as opposed to the `\b` above
+# ... a short way to match `https://` or `http://` since most urls have one of those prefixes
+# Google Docs
+/docs\.google\.com/[a-z]+/(?:ccc\?key=\w+|(?:u/\d+|d/(?:e/|)[0-9a-zA-Z_-]+/)?(?:edit\?[-\w=#.]*|/\?[\w=&]*|))
+# Google Drive
+\bdrive\.google\.com/(?:file/d/|open)[-0-9a-zA-Z_?=]*
+# Google Groups
+\bgroups\.google\.com/(?:(?:forum/#!|d/)(?:msg|topics?|searchin)|a)/[^/\s"]+/[-a-zA-Z0-9$]+(?:/[-a-zA-Z0-9]+)*
+# Google Maps
+\bmaps\.google\.com/maps\?[\w&;=]*
+# Google themes
+themes\.googleusercontent\.com/static/fonts/[^/\s"]+/v\d+/[^.]+.
+# Google CDN
+\bclients2\.google(?:usercontent|)\.com[-0-9a-zA-Z/.]*
+# Goo.gl
+/goo\.gl/[a-zA-Z0-9]+
+# Google Chrome Store
+\bchrome\.google\.com/webstore/detail/[-\w]*(?:/\w*|)
+# Google Books
+\bgoogle\.(?:\w{2,4})/books(?:/\w+)*\?[-\w\d=&#.]*
+# Google Fonts
+\bfonts\.(?:googleapis|gstatic)\.com/[-/?=:;+&0-9a-zA-Z]*
+# Google Forms
+\bforms\.gle/\w+
+# Google Scholar
+\bscholar\.google\.com/citations\?user=[A-Za-z0-9_]+
+# Google Colab Research Drive
+\bcolab\.research\.google\.com/drive/[-0-9a-zA-Z_?=]*
+
+# GitHub SHAs (api)
+\bapi.github\.com/repos(?:/[^/\s"]+){3}/[0-9a-f]+\b
+# GitHub SHAs (markdown)
+(?:\[`?[0-9a-f]+`?\]\(https:/|)/(?:www\.|)github\.com(?:/[^/\s"]+){2,}(?:/[^/\s")]+)(?:[0-9a-f]+(?:[-0-9a-zA-Z/#.]*|)\b|)
+# GitHub SHAs
+\bgithub\.com(?:/[^/\s"]+){2}[@#][0-9a-f]+\b
+# GitHub wiki
+\bgithub\.com/(?:[^/]+/){2}wiki/(?:(?:[^/]+/|)_history|[^/]+(?:/_compare|)/[0-9a-f.]{40,})\b
+# githubusercontent
+/[-a-z0-9]+\.githubusercontent\.com/[-a-zA-Z0-9?&=_\/.]*
+# githubassets
+\bgithubassets.com/[0-9a-f]+(?:[-/\w.]+)
+# gist github
+\bgist\.github\.com/[^/\s"]+/[0-9a-f]+
+# git.io
+\bgit\.io/[0-9a-zA-Z]+
+# GitHub JSON
+"node_id": "[-a-zA-Z=;:/0-9+]*"
+# Contributor
+\[[^\]]+\]\(https://github\.com/[^/\s"]+\)
+# GHSA
+GHSA(?:-[0-9a-z]{4}){3}
+
+# GitLab commit
+\bgitlab\.[^/\s"]*/\S+/\S+/commit/[0-9a-f]{7,16}#[0-9a-f]{40}\b
+# GitLab merge requests
+\bgitlab\.[^/\s"]*/\S+/\S+/-/merge_requests/\d+/diffs#[0-9a-f]{40}\b
+# GitLab uploads
+\bgitlab\.[^/\s"]*/uploads/[-a-zA-Z=;:/0-9+]*
+# GitLab commits
+\bgitlab\.[^/\s"]*/(?:[^/\s"]+/){2}commits?/[0-9a-f]+\b
+
+# binanace
+accounts.binance.com/[a-z/]*oauth/authorize\?[-0-9a-zA-Z&%]*
+
+# bitbucket diff
+\bapi\.bitbucket\.org/\d+\.\d+/repositories/(?:[^/\s"]+/){2}diff(?:stat|)(?:/[^/\s"]+){2}:[0-9a-f]+
+# bitbucket repositories commits
+\bapi\.bitbucket\.org/\d+\.\d+/repositories/(?:[^/\s"]+/){2}commits?/[0-9a-f]+
+# bitbucket commits
+\bbitbucket\.org/(?:[^/\s"]+/){2}commits?/[0-9a-f]+
+
+# bit.ly
+\bbit\.ly/\w+
+
+# bitrise
+\bapp\.bitrise\.io/app/[0-9a-f]*/[\w.?=&]*
+
+# bootstrapcdn.com
+\bbootstrapcdn\.com/[-./\w]+
+
+# cdn.cloudflare.com
+\bcdnjs\.cloudflare\.com/[./\w]+
+
+# circleci
+\bcircleci\.com/gh(?:/[^/\s"]+){1,5}.[a-z]+\?[-0-9a-zA-Z=&]+
+
+# gitter
+\bgitter\.im(?:/[^/\s"]+){2}\?at=[0-9a-f]+
+
+# gravatar
+\bgravatar\.com/avatar/[0-9a-f]+
+
+# ibm
+[a-z.]*ibm\.com/[-_#=:%!?~.\\/\d\w]*
+
+# imgur
+\bimgur\.com/[^.]+
+
+# Internet Archive
+\barchive\.org/web/\d+/(?:[-\w.?,'/\\+&%$#_:]*)
+
+# discord
+/discord(?:app\.com|\.gg)/(?:invite/)?[a-zA-Z0-9]{7,}
+
+# Disqus
+\bdisqus\.com/[-\w/%.()!?&=_]*
+
+# medium link
+\blink\.medium\.com/[a-zA-Z0-9]+
+# medium
+\bmedium\.com/\@?[^/\s"]+/[-\w]+
+
+# microsoft
+\b(?:https?://|)(?:(?:download\.visualstudio|docs|msdn2?|research)\.microsoft|blogs\.msdn)\.com/[-_a-zA-Z0-9()=./%]*
+# powerbi
+\bapp\.powerbi\.com/reportEmbed/[^"' ]*
+# vs devops
+\bvisualstudio.com(?::443|)/[-\w/?=%&.]*
+# microsoft store
+\bmicrosoft\.com/store/apps/\w+
+
+# mvnrepository.com
+\bmvnrepository\.com/[-0-9a-z./]+
+
+# now.sh
+/[0-9a-z-.]+\.now\.sh\b
+
+# oracle
+\bdocs\.oracle\.com/[-0-9a-zA-Z./_?#&=]*
+
+# chromatic.com
+/\S+.chromatic.com\S*[")]
+
+# codacy
+\bapi\.codacy\.com/project/badge/Grade/[0-9a-f]+
+
+# compai
+\bcompai\.pub/v1/png/[0-9a-f]+
+
+# mailgun api
+\.api\.mailgun\.net/v3/domains/[0-9a-z]+\.mailgun.org/messages/[0-9a-zA-Z=@]*
+# mailgun
+\b[0-9a-z]+.mailgun.org
+
+# /message-id/
+/message-id/[-\w@./%]+
+
+# Reddit
+\breddit\.com/r/[/\w_]*
+
+# requestb.in
+\brequestb\.in/[0-9a-z]+
+
+# sched
+\b[a-z0-9]+\.sched\.com\b
+
+# Slack url
+slack://[a-zA-Z0-9?&=]+
+# Slack
+\bslack\.com/[-0-9a-zA-Z/_~?&=.]*
+# Slack edge
+\bslack-edge\.com/[-a-zA-Z0-9?&=%./]+
+# Slack images
+\bslack-imgs\.com/[-a-zA-Z0-9?&=%.]+
+
+# shields.io
+\bshields\.io/[-\w/%?=&.:+;,]*
+
+# stackexchange -- https://stackexchange.com/feeds/sites
+\b(?:askubuntu|serverfault|stack(?:exchange|overflow)|superuser).com/(?:questions/\w+/[-\w]+|a/)
+
+# Sentry
+[0-9a-f]{32}\@o\d+\.ingest\.sentry\.io\b
+
+# Twitter markdown
+\[\@[^[/\]:]*?\]\(https://twitter.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)\)
+# Twitter hashtag
+\btwitter\.com/hashtag/[\w?_=&]*
+# Twitter status
+\btwitter\.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)
+# Twitter profile images
+\btwimg\.com/profile_images/[_\w./]*
+# Twitter media
+\btwimg\.com/media/[-_\w./?=]*
+# Twitter link shortened
+\bt\.co/\w+
+
+# facebook
+\bfburl\.com/[0-9a-z_]+
+# facebook CDN
+\bfbcdn\.net/[\w/.,]*
+# facebook watch
+\bfb\.watch/[0-9A-Za-z]+
+
+# dropbox
+\bdropbox\.com/sh?/[^/\s"]+/[-0-9A-Za-z_.%?=&;]+
+
+# ipfs protocol
+ipfs://[0-9a-z]*
+# ipfs url
+/ipfs/[0-9a-z]*
+
+# w3
+\bw3\.org/[-0-9a-zA-Z/#.]+
+
+# loom
+\bloom\.com/embed/[0-9a-f]+
+
+# regex101
+\bregex101\.com/r/[^/\s"]+/\d+
+
+# figma
+\bfigma\.com/file(?:/[0-9a-zA-Z]+/)+
+
+# freecodecamp.org
+\bfreecodecamp\.org/[-\w/.]+
+
+# image.tmdb.org
+\bimage\.tmdb\.org/[/\w.]+
+
+# mermaid
+\bmermaid\.ink/img/[-\w]+|\bmermaid-js\.github\.io/mermaid-live-editor/#/edit/[-\w]+
+
+# Wikipedia
+\ben\.wikipedia\.org/wiki/[-\w%.#]+
+
+# gitweb
+[^"\s]+/gitweb/\S+;h=[0-9a-f]+
+
+# HyperKitty lists
+/archives/list/[^@/]+\@[^/\s"]*/message/[^/\s"]*/
+
+# lists
+/thread\.html/[^"\s]+
+
+# list-management
+\blist-manage\.com/subscribe(?:[?&](?:u|id)=[0-9a-f]+)+
+
+# kubectl.kubernetes.io/last-applied-configuration
+"kubectl.kubernetes.io/last-applied-configuration": ".*"
+
+# pgp
+\bgnupg\.net/pks/lookup[?&=0-9a-zA-Z]*
+
+# Spotify
+\bopen\.spotify\.com/embed/playlist/\w+
+
+# Mastodon
+\bmastodon\.[-a-z.]*/(?:media/|\@)[?&=0-9a-zA-Z_]*
+
+# scastie
+\bscastie\.scala-lang\.org/[^/]+/\w+
+
+# images.unsplash.com
+\bimages\.unsplash\.com/(?:(?:flagged|reserve)/|)[-\w./%?=%&.;]+
+
+# pastebin
+\bpastebin\.com/[\w/]+
+
+# heroku
+\b\w+\.heroku\.com/source/archive/\w+
+
+# quip
+\b\w+\.quip\.com/\w+(?:(?:#|/issues/)\w+)?
+
+# badgen.net
+\bbadgen\.net/badge/[^")\]'\s]+
+
+# statuspage.io
+\w+\.statuspage\.io\b
+
+# media.giphy.com
+\bmedia\.giphy\.com/media/[^/]+/[\w.?&=]+
+
+# tinyurl
+\btinyurl\.com/\w+
+
+# getopts
+\bgetopts\s+(?:"[^"]+"|'[^']+')
+
+# ANSI color codes
+(?:\\(?:u00|x)1b|\x1b)\[\d+(?:;\d+|)m
+
+# URL escaped characters
+\%[0-9A-F][A-F]
+# IPv6
+\b(?:[0-9a-fA-F]{0,4}:){3,7}[0-9a-fA-F]{0,4}\b
+# c99 hex digits (not the full format, just one I've seen)
+0x[0-9a-fA-F](?:\.[0-9a-fA-F]*|)[pP]
+# Punycode
+\bxn--[-0-9a-z]+
+# sha
+sha\d+:[0-9]*[a-f]{3,}[0-9a-f]*
+# sha-... -- uses a fancy capture
+(['"]|&quot;)[0-9a-f]{40,}\g{-1}
+# hex runs
+\b[0-9a-fA-F]{16,}\b
+# hex in url queries
+=[0-9a-fA-F]*?(?:[A-F]{3,}|[a-f]{3,})[0-9a-fA-F]*?&
+# ssh
+(?:ssh-\S+|-nistp256) [-a-zA-Z=;:/0-9+]{12,}
+
+# PGP
+\b(?:[0-9A-F]{4} ){9}[0-9A-F]{4}\b
+# GPG keys
+\b(?:[0-9A-F]{4} ){5}(?: [0-9A-F]{4}){5}\b
+# Well known gpg keys
+.well-known/openpgpkey/[\w./]+
+
+# uuid:
+\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
+# hex digits including css/html color classes:
+(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|u\d+)\b
+# integrity
+integrity="sha\d+-[-a-zA-Z=;:/0-9+]{40,}"
+
+# https://www.gnu.org/software/groff/manual/groff.html
+# man troff content
+\\f[BCIPR]
+# '
+\\\(aq
+
+# .desktop mime types
+^MimeTypes?=.*$
+# .desktop localized entries
+^[A-Z][a-z]+\[[a-z]+\]=.*$
+# Localized .desktop content
+Name\[[^\]]+\]=.*
+
+# IServiceProvider
+\bI(?=(?:[A-Z][a-z]{2,})+\b)
+
+# crypt
+"\$2[ayb]\$.{56}"
+
+# scrypt / argon
+\$(?:scrypt|argon\d+[di]*)\$\S+
+
+# Input to GitHub JSON
+content: "[-a-zA-Z=;:/0-9+]*="
+
+# Python stringprefix / binaryprefix
+# Note that there's a high false positive rate, remove the `?=` and search for the regex to see if the matches seem like reasonable strings
+(?<!')\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
+
+# Regular expressions for (P|p)assword
+\([A-Z]\|[a-z]\)[a-z]+
+
+# JavaScript regular expressions
+# javascript test regex
+/.*/[gim]*\.test\(
+# javascript match regex
+\.match\(/[^/\s"]*/[gim]*\s*
+# javascript match regex
+\.match\(/\\[b].*?/[gim]*\s*\)(?:;|$)
+# javascript regex
+^\s*/\\[b].*/[gim]*\s*(?:\)(?:;|$)|,$)
+# javascript replace regex
+\.replace\(/[^/\s"]*/[gim]*\s*,
+
+# Go regular expressions
+regexp?\.MustCompile\(`[^`]*`\)
+
+# sed regular expressions
+sed 's/(?:[^/]*?[a-zA-Z]{3,}[^/]*?/){2}
+
+# go install
+go install(?:\s+[a-z]+\.[-@\w/.]+)+
+
+# kubernetes pod status lists
+# https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-phase
+\w+(?:-\w+)+\s+\d+/\d+\s+(?:Running|Pending|Succeeded|Failed|Unknown)\s+
+
+# kubectl - pods in CrashLoopBackOff
+\w+-[0-9a-f]+-\w+\s+\d+/\d+\s+CrashLoopBackOff\s+
+
+# kubernetes object suffix
+-[0-9a-f]{10}-\w{5}\s
+
+# posthog secrets
+posthog\.init\((['"])phc_[^"',]+\g{-1},
+
+# xcode
+
+# xcodeproject scenes
+(?:Controller|ID|id)="\w{3}-\w{2}-\w{3}"
+
+# xcode api botches
+customObjectInstantitationMethod
+
+# font awesome classes
+\.fa-[-a-z0-9]+
+
+# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
+# grep '^[^#].*lorem' .github/actions/spelling/patterns.txt|perl -pne 's/.*i..\?://;s/\).*//' |tr '|' "\n"|sort -f |xargs -n1 ge|perl -pne 's/^[^:]*://'|sort -u|w|sed -e 's/ .*//'|w|review -
+# Warning, while `(?i)` is very neat and fancy, if you have some binary files that aren't proper unicode, you might run into:
+## Operation "substitution (s///)" returns its argument for non-Unicode code point 0x1C19AE (the code point will vary).
+## You could manually change `(?i)X...` to use `[Xx]...`
+## or you could add the files to your `excludes` file (a version after 0.0.19 should identify the file path)
+# Lorem
+(?:\w|\s|[,.])*\b(?i)(?:amet|consectetur|cursus|dolor|eros|ipsum|lacus|libero|ligula|lorem|magna|neque|nulla|suscipit|tempus)\b(?:\w|\s|[,.])*
+
+# Non-English
+[a-zA-Z]*[ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*
+
+# French
+# This corpus only had capital letters, but you probably want lowercase ones as well.
+\b[LN]'+[a-z]{2,}\b
+
+# latex
+\\(?:n(?:ew|ormal|osub)|r(?:enew)|t(?:able(?:of|)|he|itle))(?=[a-z]+)
+
+# the negative lookahead here is to allow catching 'templatesz' as a misspelling
+# but to otherwise recognize a Windows path with \templates\foo.template or similar:
+\\(?:necessary|r(?:eport|esolve[dr]?|esult)|t(?:arget|emplates?))(?![a-z])
+# ignore long runs of a single character:
+\b([A-Za-z])\g{-1}{3,}\b
+# Note that the next example is no longer necessary if you are using
+# to match a string starting with a `#`, use a character-class:
+[#]backwards
+# version suffix <word>v#
+(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
+# Compiler flags (Scala)
+(?:^|[\t ,>"'`=(])-J-[DPWXY](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
+# Compiler flags
+#(?:^|[\t ,"'`=(])-[DPWXYLlf](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
+
+# Compiler flags (linker)
+,-B
+# curl arguments
+\b(?:\\n|)curl(?:\s+-[a-zA-Z]{1,2}\b)*(?:\s+-[a-zA-Z]{3,})(?:\s+-[a-zA-Z]+)*
+# set arguments
+\bset(?:\s+-[abefimouxE]{1,2})*\s+-[abefimouxE]{3,}(?:\s+-[abefimouxE]+)*
+# tar arguments
+\b(?:\\n|)g?tar(?:\.exe|)(?:(?:\s+--[-a-zA-Z]+|\s+-[a-zA-Z]+|\s[ABGJMOPRSUWZacdfh-pr-xz]+\b)(?:=[^ ]*|))+
+# tput arguments -- https://man7.org/linux/man-pages/man5/terminfo.5.html -- technically they can be more than 5 chars long...
+\btput\s+(?:(?:-[SV]|-T\s*\w+)\s+)*\w{3,5}\b
+# macOS temp folders
+/var/folders/\w\w/[+\w]+/(?:T|-Caches-)/

.github/actions/spelling/excludes.txt

@@ -0,0 +1,117 @@
+# See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-excludes
+(?:(?i)\.png$)
+(?:^|/)(?i)COPYRIGHT
+(?:^|/)(?i)LICEN[CS]E
+(?:^|/)3rdparty/
+(?:^|/)dirs$
+(?:^|/)go\.mod$
+(?:^|/)go\.sum$
+(?:^|/)package(?:-lock|)\.json$
+(?:^|/)sources(?:|\.dep)$
+(?:^|/)vendor/
+\.a$
+\.ai$
+\.avi$
+\.bmp$
+\.bz2$
+\.cer$
+\.class$
+\.crl$
+\.crt$
+\.csr$
+\.dll$
+\.docx?$
+\.drawio$
+\.DS_Store$
+\.eot$
+\.eps$
+\.exe$
+\.gif$
+\.gitattributes$
+\.graffle$
+\.gz$
+\.icns$
+\.ico$
+\.jar$
+\.jks$
+\.jpeg$
+\.jpg$
+\.key$
+\.lib$
+\.lock$
+\.map$
+\.min\..
+\.mod$
+\.mp3$
+\.mp4$
+\.o$
+\.ocf$
+\.otf$
+\.pbxproj$
+\.pdf$
+\.pem$
+\.png$
+\.psd$
+\.pyc$
+\.runsettings$
+\.s$
+\.sig$
+\.so$
+\.svg$
+\.svgz$
+\.svgz?$
+\.tar$
+\.tgz$
+\.tiff?$
+\.ttf$
+\.vsdx$
+\.wav$
+\.webm$
+\.webp$
+\.woff
+\.woff2?$
+\.xcf$
+\.xls
+\.xlsx?$
+\.xpm$
+\.yml$
+\.zip$
+^\.github/actions/spelling/
+^\.github/fabricbot.json$
+^\.gitignore$
+^\Q.git-blame-ignore-revs\E$
+^\Q.github/workflows/spelling.yml\E$
+^\Qdoc/reference/windows-terminal-logo.ans\E$
+^\Qsamples/ConPTY/EchoCon/EchoCon/EchoCon.vcxproj.filters\E$
+^\Qsrc/host/exe/Host.EXE.vcxproj.filters\E$
+^\Qsrc/host/ft_host/chafa.txt\E$
+^\Qsrc/tools/closetest/CloseTest.vcxproj.filters\E$
+^\XamlStyler.json$
+^build/config/
+^consolegit2gitfilters\.json$
+^dep/
+^doc/reference/master-sequence-list.csv$
+^doc/reference/UTF8-torture-test\.txt$
+^oss/
+^src/host/ft_uia/run\.bat$
+^src/host/runft\.bat$
+^src/host/runut\.bat$
+^src/interactivity/onecore/BgfxEngine\.
+^src/renderer/atlas/
+^src/renderer/wddmcon/WddmConRenderer\.
+^src/terminal/adapter/ut_adapter/run\.bat$
+^src/terminal/parser/delfuzzpayload\.bat$
+^src/terminal/parser/ft_fuzzer/run\.bat$
+^src/terminal/parser/ft_fuzzer/VTCommandFuzzer\.cpp$
+^src/terminal/parser/ft_fuzzwrapper/run\.bat$
+^src/terminal/parser/ut_parser/Base64Test.cpp$
+^src/terminal/parser/ut_parser/run\.bat$
+^src/tools/integrity/packageuwp/ConsoleUWP\.appxSources$
+^src/tools/lnkd/lnkd\.bat$
+^src/tools/pixels/pixels\.bat$
+^src/tools/texttests/fira\.txt$
+^src/tools/U8U16Test/(?:fr|ru|zh)\.txt$
+^src/types/ut_types/UtilsTests.cpp$
+^tools/ReleaseEngineering/ServicingPipeline.ps1$
+ignore$
+SUMS$

.github/actions/spelling/expect/README.md

@@ -0,0 +1,13 @@
+The contents of each `.txt` file in this directory are merged together.
+
+* [alphabet](alphabet.txt) is a sample for alphabet related items
+* [web](web.txt) is a sample for web/html related items
+* [expect](expect.txt) is the main list of expected items -- there is nothing
+particularly special about the file name (beyond the extension which is
+important).
+
+These terms are things which temporarily exist in the project, but which
+aren't necessarily words.
+
+If something is a word that could come and go, it probably belongs in a
+[dictionary](../dictionary/README.md).

.github/actions/spelling/expect/alphabet.txt

@@ -0,0 +1,40 @@
+AAAa
+AAAAA
+AAAAAAAAAAAAA
+AAAAAABBBBBBCCC
+AAAAABBBBBBCCC
+abcd
+abcd
+ABCDEFGHIJ
+abcdefghijk
+ABCDEFGHIJKLMNO
+abcdefghijklmnop
+ABCDEFGHIJKLMNOPQRST
+ABCG
+ABE
+abf
+BBBBB
+BBBBBBBB
+BBBBBCCC
+BBBBCCCCC
+BBGGRR
+EFG
+EFGh
+QQQQQQQQQQABCDEFGHIJ
+QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQ
+QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQQ
+QQQQQQQQQQABCDEFGHIJPQRSTQQQQQQQQQQ
+qrstuvwxyz
+qwerty
+qwertyuiopasdfg
+YYYYYYYDDDDDDDDDDD
+ZAAZZ
+ZABBZ
+ZBAZZ
+ZBBBZ
+ZBBZZ
+ZYXWVUT
+ZZBBZ
+ZZZBB
+ZZZBZ
+ZZZZZ

.github/actions/spelling/expect/web.txt

@@ -0,0 +1,6 @@
+WCAG
+winui
+appshellintegration
+mdtauk
+gfycat
+Guake

.github/actions/spelling/line_forbidden.patterns

@@ -0,0 +1,62 @@
+# reject `m_data` as there's a certain OS which has evil defines that break things if it's used elsewhere
+# \bm_data\b
+
+# If you have a framework that uses `it()` for testing and `fit()` for debugging a specific test,
+# you might not want to check in code where you were debugging w/ `fit()`, in which case, you might want
+# to use this:
+#\bfit\(
+
+# s.b. GitHub
+\bGithub\b
+
+# s.b. GitLab
+\bGitlab\b
+
+# s.b. JavaScript
+\bJavascript\b
+
+# s.b. Microsoft
+\bMicroSoft\b
+
+# s.b. another
+\ban[- ]other\b
+
+# s.b. greater than
+\bgreater then\b
+
+# s.b. into
+#\sin to\s
+
+# s.b. opt-in
+\sopt in\s
+
+# s.b. less than
+\bless then\b
+
+# s.b. otherwise
+\bother[- ]wise\b
+
+# s.b. nonexistent
+\bnon existing\b
+\b[Nn]o[nt][- ]existent\b
+
+# s.b. preexisting
+[Pp]re[- ]existing
+
+# s.b. preempt
+[Pp]re[- ]empt\b
+
+# s.b. preemptively
+[Pp]re[- ]emptively
+
+# s.b. reentrancy
+[Rr]e[- ]entrancy
+
+# s.b. reentrant
+[Rr]e[- ]entrant
+
+# s.b. workaround(s)
+#\bwork[- ]arounds?\b
+
+# Reject duplicate words
+\s([A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})\s\g{-1}\s

.github/actions/spelling/patterns/0_n.txt

@@ -0,0 +1,2 @@
+\\native(?![a-z])
+\\nihilist(?![a-z])

.github/actions/spelling/patterns/0_r.txt

@@ -0,0 +1,8 @@
+\\registry(?![a-z])
+\\release(?![a-z])
+\\resources?(?![a-z])
+\\result(?![a-z])
+\\resultmacros(?![a-z])
+\\rules(?![a-z])
+\\renderer(?![a-z])
+\\rectread(?![a-z])

.github/actions/spelling/patterns/0_t.txt

@@ -0,0 +1,13 @@
+\\telemetry(?![a-z])
+\\templates(?![a-z])
+\\term(?![a-z])
+\\terminal(?![a-z])
+\\terminalcore(?![a-z])
+\\terminalinput(?![a-z])
+\\testlist(?![a-z])
+\\testmd(?![a-z])
+\\testpasses(?![a-z])
+\\tests(?![a-z])
+\\thread(?![a-z])
+\\tools(?![a-z])
+\\types(?![a-z])

.github/actions/spelling/patterns/README.md

@@ -0,0 +1,16 @@
+The contents of each `.txt` file in this directory are merged together.
+Each line is a Perl 5 regular expression.
+Nothing is guaranteed about the order in which they're merged.
+-- If this is a problem, please reach out.
+
+Note: order of the contents of these files can matter.
+Lines from an individual file are handled in file order.
+Files are selected in alphabetical order.
+
+* [n](0_n.txt), [r](0_r.txt), and [t](0_t.txt) are specifically to work around
+a quirk in the spell checker:
+it often sees C strings of the form "Hello\nwerld". And would prefer to
+spot the typo of `werld`.
+* [patterns](patterns.txt) is the main list -- there is nothing
+particularly special about the file name (beyond the extension which is
+important).

.github/actions/spelling/patterns/patterns.txt

@@ -0,0 +1,96 @@
+# See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns
+
+https?://\S+
+[Pp]ublicKeyToken="?[0-9a-fA-F]{16}"?
+(?:[{"]|UniqueIdentifier>)[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}(?:[}"]|</UniqueIdentifier)
+(?:0[Xx]|\\x|U\+|#)[a-f0-9A-FGgRr]{2,}[Uu]?[Ll]{0,2}\b
+microsoft/cascadia-code\@[0-9a-fA-F]{40}
+\d+x\d+Logo
+Scro\&ll
+# selectionInput.cpp
+ :\\windows\\syste\b
+TestUtils::VerifyExpectedString\(tb, L"[^"]+"
+(?:hostSm|mach)\.ProcessString\(L"[^"]+"
+\b([A-Za-z])\g{-1}{3,}\b
+0x[0-9A-Za-z]+
+Base64::s_(?:En|De)code\(L"[^"]+"
+VERIFY_ARE_EQUAL\(L"[^"]+"
+"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789\+/"
+std::memory_order_[\w]+
+D2DERR_SHADER_COMPILE_FAILED
+TIL_FEATURE_[0-9A-Z_]+
+vcvars\w*
+ROY\sG\.\sBIV
+!(?:(?i)ESC)!\[
+!(?:(?i)CSI)!(?:\d+(?:;\d+|)m|[ABCDF])
+
+# Python stringprefix / binaryprefix
+\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'
+
+# Automatically suggested patterns
+# hit-count: 3831 file-count: 582
+# IServiceProvider
+\bI(?=(?:[A-Z][a-z]{2,})+\b)
+
+# hit-count: 71 file-count: 35
+# Compiler flags
+(?:^|[\t ,"'`=(])-[D](?=[A-Z]{2,}|[A-Z][a-z])
+(?:^|[\t ,"'`=(])-[X](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
+
+# hit-count: 41 file-count: 28
+# version suffix <word>v#
+(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
+
+# hit-count: 20 file-count: 9
+# hex runs
+\b[0-9a-fA-F]{16,}\b
+
+# hit-count: 10 file-count: 7
+# uuid:
+\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
+
+# hit-count: 4 file-count: 4
+# mailto urls
+mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
+
+# hit-count: 4 file-count: 1
+# ANSI color codes
+(?:\\(?:u00|x)1b|\x1b)\[\d+(?:;\d+|)m
+
+# hit-count: 2 file-count: 1
+# latex
+\\(?:n(?:ew|ormal|osub)|r(?:enew)|t(?:able(?:of|)|he|itle))(?=[a-z]+)
+
+# hit-count: 1 file-count: 1
+# hex digits including css/html color classes:
+(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|u\d+)\b
+
+# hit-count: 1 file-count: 1
+# Non-English
+[a-zA-Z]*[ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*
+
+# hit-count: 1 file-count: 1
+# French
+# This corpus only had capital letters, but you probably want lowercase ones as well.
+\b[LN]'+[a-z]{2,}\b
+
+# acceptable duplicates
+# ls directory listings
+[-bcdlpsw](?:[-r][-w][-sx]){3}\s+\d+\s+(\S+)\s+\g{-1}\s+\d+\s+
+# C/idl types + English ...
+\s(Guid|long|LONG|that) \g{-1}\s
+
+# javadoc / .net
+(?:[\\@](?:groupname|param)|(?:public|private)(?:\s+static|\s+readonly)*)\s+(\w+)\s+\g{-1}\s
+
+# Commit message -- Signed-off-by and friends
+^\s*(?:(?:Based-on-patch|Co-authored|Helped|Mentored|Reported|Reviewed|Signed-off)-by|Thanks-to): (?:[^<]*<[^>]*>|[^<]*)\s*$
+
+# Autogenerated revert commit message
+^This reverts commit [0-9a-f]{40}\.$
+
+# vtmode
+--vtmode\s+(\w+)\s+\g{-1}\s
+
+# ignore long runs of a single character:
+\b([A-Za-z])\g{-1}{3,}\b

.github/actions/spelling/reject.txt

@@ -0,0 +1,12 @@
+^attache$
+^attacher$
+^attachers$
+benefitting
+occurences?
+^dependan.*
+^oer$
+Sorce
+^[Ss]pae.*
+^untill$
+^untilling$
+^wether.*

.github/workflows/spelling2.yml

@@ -0,0 +1,134 @@
+# spelling.yml is blocked per https://github.com/check-spelling/check-spelling/security/advisories/GHSA-g86g-chm8-7r2p
+name: Spell checking
+
+# Comment management is handled through a secondary job, for details see:
+# https://github.com/check-spelling/check-spelling/wiki/Feature%3A-Restricted-Permissions
+#
+# `jobs.comment-push` runs when a push is made to a repository and the `jobs.spelling` job needs to make a comment
+#   (in odd cases, it might actually run just to collapse a commment, but that's fairly rare)
+#   it needs `contents: write` in order to add a comment.
+#
+# `jobs.comment-pr` runs when a pull_request is made to a repository and the `jobs.spelling` job needs to make a comment
+#   or collapse a comment (in the case where it had previously made a comment and now no longer needs to show a comment)
+#   it needs `pull-requests: write` in order to manipulate those comments.
+
+# Updating pull request branches is managed via comment handling.
+# For details, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Update-expect-list
+#
+# These elements work together to make it happen:
+#
+# `on.issue_comment`
+#   This event listens to comments by users asking to update the metadata.
+#
+# `jobs.update`
+#   This job runs in response to an issue_comment and will push a new commit
+#   to update the spelling metadata.
+#
+# `with.experimental_apply_changes_via_bot`
+#   Tells the action to support and generate messages that enable it
+#   to make a commit to update the spelling metadata.
+#
+# `with.ssh_key`
+#   In order to trigger workflows when the commit is made, you can provide a
+#   secret (typically, a write-enabled github deploy key).
+#
+#   For background, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Update-with-deploy-key
+
+on:
+  push:
+    branches:
+    - "**"
+    tags-ignore:
+    - "**"
+  pull_request_target:
+    branches:
+    - "**"
+    tags-ignore:
+    - "**"
+    types:
+    - 'opened'
+    - 'reopened'
+    - 'synchronize'
+  issue_comment:
+    types:
+    - 'created'
+
+jobs:
+  spelling:
+    name: Spell checking
+    permissions:
+      contents: read
+      pull-requests: read
+      actions: read
+    outputs:
+      followup: ${{ steps.spelling.outputs.followup }}
+    runs-on: ubuntu-latest
+    if: "contains(github.event_name, 'pull_request') || github.event_name == 'push'"
+    concurrency:
+      group: spelling-${{ github.event.pull_request.number || github.ref }}
+      # note: If you use only_check_changed_files, you do not want cancel-in-progress
+      cancel-in-progress: true
+    steps:
+    - name: check-spelling
+      id: spelling
+      uses: check-spelling/check-spelling@v0.0.21
+      with:
+        suppress_push_for_open_pull_request: 1
+        checkout: true
+        check_file_names: 1
+        spell_check_this: check-spelling/spell-check-this@prerelease
+        post_comment: 0
+        use_magic_file: 1
+        extra_dictionary_limit: 10
+        extra_dictionaries:
+          cspell:software-terms/src/software-terms.txt
+          cspell:python/src/python/python-lib.txt
+          cspell:node/node.txt
+          cspell:cpp/src/stdlib-c.txt
+          cspell:cpp/src/stdlib-cpp.txt
+          cspell:fullstack/fullstack.txt
+          cspell:filetypes/filetypes.txt
+          cspell:html/html.txt
+          cspell:cpp/src/compiler-msvc.txt
+          cspell:python/src/common/extra.txt
+          cspell:powershell/powershell.txt
+          cspell:aws/aws.txt
+          cspell:cpp/src/lang-keywords.txt
+          cspell:npm/npm.txt
+          cspell:dotnet/dotnet.txt
+          cspell:python/src/python/python.txt
+          cspell:css/css.txt
+          cspell:cpp/src/stdlib-cmath.txt
+        check_extra_dictionaries: ''
+
+  comment-push:
+    name: Report (Push)
+    # If your workflow isn't running on push, you can remove this job
+    runs-on: ubuntu-latest
+    needs: spelling
+    permissions:
+      contents: write
+    if: (success() || failure()) && needs.spelling.outputs.followup && github.event_name == 'push'
+    steps:
+    - name: comment
+      uses: check-spelling/check-spelling@v0.0.21
+      with:
+        checkout: true
+        spell_check_this: check-spelling/spell-check-this@prerelease
+        task: ${{ needs.spelling.outputs.followup }}
+
+  comment-pr:
+    name: Report (PR)
+    # If you workflow isn't running on pull_request*, you can remove this job
+    runs-on: ubuntu-latest
+    needs: spelling
+    permissions:
+      pull-requests: write
+    if: (success() || failure()) && needs.spelling.outputs.followup && contains(github.event_name, 'pull_request')
+    steps:
+    - name: comment
+      uses: check-spelling/check-spelling@v0.0.21
+      with:
+        checkout: true
+        spell_check_this: check-spelling/spell-check-this@prerelease
+        task: ${{ needs.spelling.outputs.followup }}

.gitignore

@@ -144,13 +144,13 @@ publish/
 # Publish Web Output
 *.[Pp]ublish.xml
 *.azurePubxml
-# TODO: Comment the next line if you want to checkin your web deploy settings
+# TODO: Comment the next line if you want to check in your web deploy settings
 # but database connection strings (with potential passwords) will be unencrypted
 *.pubxml
 *.publishproj
 
 # Microsoft Azure Web App publish settings. Comment the next line if you want to
-# checkin your Azure Web App publish settings, but sensitive information contained
+# check in your Azure Web App publish settings, but sensitive information contained
 # in these scripts will be unencrypted
 PublishScripts/
 
@@ -162,7 +162,7 @@ PublishScripts/
 !**/packages/build/
 # Uncomment if necessary however generally it will be regenerated when needed
 #!**/packages/repositories.config
-# NuGet v3's project.json files produces more ignoreable files
+# NuGet v3's project.json files produces more ignorable files
 *.nuget.props
 *.nuget.targets
 

CODE_OF_CONDUCT.md

@@ -1,8 +1,9 @@
-# Code of Conduct
+# Microsoft Open Source Code of Conduct
 
-This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
-For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
+This project has adopted the [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/).
 
-[conduct-code]: https://opensource.microsoft.com/codeofconduct/
-[conduct-FAQ]: https://opensource.microsoft.com/codeofconduct/faq/
-[conduct-email]: mailto:opencode@microsoft.com
+Resources:
+
+- [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/)
+- [Microsoft Code of Conduct FAQ](https://opensource.microsoft.com/codeofconduct/faq/)
+- Contact [opencode@microsoft.com](mailto:opencode@microsoft.com) with questions or concerns

CONTRIBUTING.md

@@ -23,7 +23,7 @@ Therefore, if you do file issues, or create PRs, please keep an eye on your GitH
 ---
 ## Reporting Security Issues
 
-**Please do not report security vulnerabilities through public GitHub issues.** Instead, please report them to the Microsoft Security Response Center (MSRC). See [Security.md](../SECURITY.md) for more information.
+**Please do not report security vulnerabilities through public GitHub issues.** Instead, please report them to the Microsoft Security Response Center (MSRC). See [SECURITY.md](./SECURITY.md) for more information.
 
 ## Before you start, file an issue
 

NOTICE.md

@@ -80,7 +80,7 @@ SOFTWARE.
 
 ## chromium/base/numerics
 
-**Source**: 
+**Source**: https://github.com/chromium/chromium/tree/master/base/numerics
 
 ### License
 
@@ -112,4 +112,71 @@ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+```
+
+## kimwalisch/libpopcnt
+
+**Source**: https://github.com/kimwalisch/libpopcnt
+
+### License
+
+```
+BSD 2-Clause License
+
+Copyright (c) 2016 - 2019, Kim Walisch
+Copyright (c) 2016 - 2019, Wojciech Muła
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+```
+
+## dynamic_bitset
+
+**Source**: https://github.com/pinam45/dynamic_bitset
+
+### License
+
+```
+MIT License
+
+Copyright (c) 2019 Maxime Pinard
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
 ```

OpenConsole.sln

@@ -98,16 +98,6 @@ EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Propsheet.DLL", "src\propsheet\propsheet.vcxproj", "{5D23E8E1-3C64-4CC1-A8F7-6861677F7239}"
 EndProject
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "_Build Common", "_Build Common", "{04170EEF-983A-4195-BFEF-2321E5E38A1E}"
-	ProjectSection(SolutionItems) = preProject
-		src\common.build.post.props = src\common.build.post.props
-		src\common.build.pre.props = src\common.build.pre.props
-		src\common.build.tests.props = src\common.build.tests.props
-		common.openconsole.props = common.openconsole.props
-		src\cppwinrt.build.post.props = src\cppwinrt.build.post.props
-		src\cppwinrt.build.pre.props = src\cppwinrt.build.pre.props
-		src\wap-common.build.post.props = src\wap-common.build.post.props
-		src\wap-common.build.pre.props = src\wap-common.build.pre.props
-	EndProjectSection
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Server", "src\server\lib\server.vcxproj", "{18D09A24-8240-42D6-8CB6-236EEE820262}"
 EndProject
@@ -271,6 +261,45 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "til.unit.tests", "src\til\u
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "U8U16Test", "src\tools\U8U16Test\U8U16Test.vcxproj", "{A602A555-BAAC-46E1-A91D-3DAB0475C5A1}"
 EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Common Props", "Common Props", "{53DD5520-E64C-4C06-B472-7CE62CA539C9}"
+	ProjectSection(SolutionItems) = preProject
+		src\common.build.post.props = src\common.build.post.props
+		src\common.build.pre.props = src\common.build.pre.props
+		src\common.build.tests.props = src\common.build.tests.props
+		common.openconsole.props = common.openconsole.props
+		src\cppwinrt.build.post.props = src\cppwinrt.build.post.props
+		src\cppwinrt.build.pre.props = src\cppwinrt.build.pre.props
+		src\wap-common.build.post.props = src\wap-common.build.post.props
+		src\wap-common.build.pre.props = src\wap-common.build.pre.props
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "YAML", "YAML", "{6B5A44ED-918D-4747-BFB1-2472A1FCA173}"
+	ProjectSection(SolutionItems) = preProject
+		build\pipelines\templates\build-console-audit-job.yml = build\pipelines\templates\build-console-audit-job.yml
+		build\pipelines\templates\build-console-ci.yml = build\pipelines\templates\build-console-ci.yml
+		build\pipelines\templates\build-console-int.yml = build\pipelines\templates\build-console-int.yml
+		build\pipelines\templates\build-console-steps.yml = build\pipelines\templates\build-console-steps.yml
+		build\pipelines\templates\check-formatting.yml = build\pipelines\templates\check-formatting.yml
+		build\pipelines\ci.yml = build\pipelines\ci.yml
+		build\pipelines\templates\release-sign-and-bundle.yml = build\pipelines\templates\release-sign-and-bundle.yml
+		build\pipelines\release.yml = build\pipelines\release.yml
+	EndProjectSection
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Scripts", "Scripts", "{D3EF7B96-CD5E-47C9-B9A9-136259563033}"
+	ProjectSection(SolutionItems) = preProject
+		build\scripts\Create-AppxBundle.ps1 = build\scripts\Create-AppxBundle.ps1
+		build\scripts\Index-Pdbs.ps1 = build\scripts\Index-Pdbs.ps1
+		build\scripts\Invoke-FormattingCheck.ps1 = build\scripts\Invoke-FormattingCheck.ps1
+		build\scripts\Run-Tests.ps1 = build\scripts\Run-Tests.ps1
+		build\scripts\Test-WindowsTerminalPackage.ps1 = build\scripts\Test-WindowsTerminalPackage.ps1
+	EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Dx.Unit.Tests", "src\renderer\dx\ut_dx\Dx.Unit.Tests.vcxproj", "{95B136F9-B238-490C-A7C5-5843C1FECAC4}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "winconpty.Tests.Feature", "src\winconpty\ft_pty\winconpty.FeatureTests.vcxproj", "{024052DE-83FB-4653-AEA4-90790D29D5BD}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "TerminalAzBridge", "src\cascadia\TerminalAzBridge\TerminalAzBridge.vcxproj", "{067F0A06-FCB7-472C-96E9-B03B54E8E18D}"
+EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
 		AuditMode|Any CPU = AuditMode|Any CPU
@@ -1396,6 +1425,66 @@ Global
 		{A602A555-BAAC-46E1-A91D-3DAB0475C5A1}.Release|x64.Build.0 = Release|x64
 		{A602A555-BAAC-46E1-A91D-3DAB0475C5A1}.Release|x86.ActiveCfg = Release|Win32
 		{A602A555-BAAC-46E1-A91D-3DAB0475C5A1}.Release|x86.Build.0 = Release|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.AuditMode|x64.ActiveCfg = Release|x64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.AuditMode|x86.ActiveCfg = AuditMode|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.AuditMode|x86.Build.0 = AuditMode|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Debug|Any CPU.ActiveCfg = Debug|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Debug|ARM64.Build.0 = Debug|ARM64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Debug|x64.ActiveCfg = Debug|x64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Debug|x64.Build.0 = Debug|x64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Debug|x86.ActiveCfg = Debug|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Debug|x86.Build.0 = Debug|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Release|Any CPU.ActiveCfg = Release|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Release|ARM64.ActiveCfg = Release|ARM64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Release|ARM64.Build.0 = Release|ARM64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Release|x64.ActiveCfg = Release|x64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Release|x64.Build.0 = Release|x64
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Release|x86.ActiveCfg = Release|Win32
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4}.Release|x86.Build.0 = Release|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.AuditMode|x64.ActiveCfg = Release|x64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.AuditMode|x86.ActiveCfg = AuditMode|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.AuditMode|x86.Build.0 = AuditMode|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Debug|Any CPU.ActiveCfg = Debug|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Debug|ARM64.Build.0 = Debug|ARM64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Debug|x64.ActiveCfg = Debug|x64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Debug|x64.Build.0 = Debug|x64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Debug|x86.ActiveCfg = Debug|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Debug|x86.Build.0 = Debug|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Release|Any CPU.ActiveCfg = Release|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Release|ARM64.ActiveCfg = Release|ARM64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Release|ARM64.Build.0 = Release|ARM64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Release|x64.ActiveCfg = Release|x64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Release|x64.Build.0 = Release|x64
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Release|x86.ActiveCfg = Release|Win32
+		{024052DE-83FB-4653-AEA4-90790D29D5BD}.Release|x86.Build.0 = Release|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.AuditMode|x64.ActiveCfg = Release|x64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.AuditMode|x86.ActiveCfg = AuditMode|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.AuditMode|x86.Build.0 = AuditMode|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Debug|Any CPU.ActiveCfg = Debug|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Debug|ARM64.Build.0 = Debug|ARM64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Debug|x64.ActiveCfg = Debug|x64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Debug|x64.Build.0 = Debug|x64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Debug|x86.ActiveCfg = Debug|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Debug|x86.Build.0 = Debug|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Release|Any CPU.ActiveCfg = Release|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Release|ARM64.ActiveCfg = Release|ARM64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Release|ARM64.Build.0 = Release|ARM64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Release|x64.ActiveCfg = Release|x64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Release|x64.Build.0 = Release|x64
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Release|x86.ActiveCfg = Release|Win32
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D}.Release|x86.Build.0 = Release|Win32
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE
@@ -1467,6 +1556,12 @@ Global
 		{BDB237B6-1D1D-400F-84CC-40A58FA59C8E} = {59840756-302F-44DF-AA47-441A9D673202}
 		{767268EE-174A-46FE-96F0-EEE698A1BBC9} = {89CDCC5C-9F53-4054-97A4-639D99F169CD}
 		{A602A555-BAAC-46E1-A91D-3DAB0475C5A1} = {A10C4720-DCA4-4640-9749-67F4314F527C}
+		{53DD5520-E64C-4C06-B472-7CE62CA539C9} = {04170EEF-983A-4195-BFEF-2321E5E38A1E}
+		{6B5A44ED-918D-4747-BFB1-2472A1FCA173} = {04170EEF-983A-4195-BFEF-2321E5E38A1E}
+		{D3EF7B96-CD5E-47C9-B9A9-136259563033} = {04170EEF-983A-4195-BFEF-2321E5E38A1E}
+		{95B136F9-B238-490C-A7C5-5843C1FECAC4} = {05500DEF-2294-41E3-AF9A-24E580B82836}
+		{024052DE-83FB-4653-AEA4-90790D29D5BD} = {E8F24881-5E37-4362-B191-A3BA0ED7F4EB}
+		{067F0A06-FCB7-472C-96E9-B03B54E8E18D} = {59840756-302F-44DF-AA47-441A9D673202}
 	EndGlobalSection
 	GlobalSection(ExtensibilityGlobals) = postSolution
 		SolutionGuid = {3140B1B7-C8EE-43D1-A772-D82A7061A271}

README.md

@@ -17,7 +17,15 @@ Related repositories include:
 
 > 👉 Note: Windows Terminal requires Windows 10 1903 (build 18362) or later
 
-### Manually installing builds from this repository
+### Microsoft Store [Recommended]
+
+Install the [Windows Terminal from the Microsoft Store][store-install-link]. This allows you to always be on the latest version when we release new builds with automatic upgrades. 
+
+This is our preferred method.
+
+### Other install methods
+
+#### Via GitHub
 
 For users who are unable to install Terminal from the Microsoft Store, Terminal builds can be manually downloaded from this repository's [Releases page](https://github.com/microsoft/terminal/releases).
 
@@ -26,7 +34,7 @@ For users who are unable to install Terminal from the Microsoft Store, Terminal
 > * Be sure to install the [Desktop Bridge VC++ v14 Redistributable Package](https://www.microsoft.com/en-us/download/details.aspx?id=53175) otherwise Terminal may not install and/or run and may crash at startup
 > * Terminal will not auto-update when new builds are released so you will need to regularly install the latest Terminal release to receive all the latest fixes and improvements!
 
-### Install via Chocolatey (unofficial)
+#### Via Chocolatey (unofficial)
 
 [Chocolatey](https://chocolatey.org) users can download and install the latest Terminal release by installing the `microsoft-windows-terminal` package:
 
@@ -131,7 +139,7 @@ All project documentation is located in the `./doc` folder. If you would like to
 
 We are excited to work alongside you, our amazing community, to build and enhance Windows Terminal\!
 
-***BEFORE you start work on a feature/fix***, please read & follow our [Contributor's Guide](https://github.com/microsoft/terminal/blob/master/contributing.md) to help avoid any wasted or duplicate effort.
+***BEFORE you start work on a feature/fix***, please read & follow our [Contributor's Guide](https://github.com/microsoft/terminal/blob/master/CONTRIBUTING.md) to help avoid any wasted or duplicate effort.
 
 ## Communicating with the Team
 
@@ -219,3 +227,4 @@ For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [open
 [conduct-code]: https://opensource.microsoft.com/codeofconduct/
 [conduct-FAQ]: https://opensource.microsoft.com/codeofconduct/faq/
 [conduct-email]: mailto:opencode@microsoft.com
+[store-install-link]: https://aka.ms/windowsterminal

build/config/LocConfig.xml

@@ -0,0 +1,15 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Modules>
+  <Module name="Microsoft.WindowsTerminal" tdbuildteamid="7105">
+    <File location="TerminalApp"
+      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalApp\Resources\en-US\Resources.resw" />
+    <File location="TerminalControl"
+      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalControl\Resources\en-US\Resources.resw" />
+    <File location="TerminalConnection"
+      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\TerminalConnection\Resources\en-US\Resources.resw" />
+    <File location="WindowsTerminalUniversal"
+      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\WindowsTerminalUniversal\Resources\en-US\Resources.resw" />
+    <File location="CascadiaPackage"
+      path="%BUILD_SOURCESDIRECTORY%\src\cascadia\CascadiaPackage\Resources\en-US\Resources.resw" />
+  </Module>
+</Modules>

build/pipelines/templates/build-console-steps.yml

@@ -52,32 +52,29 @@ steps:
     arguments: -SearchDir '$(Build.SourcesDirectory)' -SourceRoot '$(Build.SourcesDirectory)' -recursive -Verbose -CommitId $(Build.SourceVersion)
     errorActionPreference: silentlyContinue
 
-- task: VSTest@2
+- task: PowerShell@2
+  displayName: 'Rationalize build platform'
+  inputs:
+    targetType: inline
+    script: |
+      $Arch = "$(BuildPlatform)"
+      If ($Arch -Eq "x86") { $Arch = "Win32" }
+      Write-Host "##vso[task.setvariable variable=RationalizedBuildPlatform]${Arch}"
+
+- task: PowerShell@2
   displayName: 'Run Unit Tests'
   inputs:
-    testAssemblyVer2: |
-      $(BUILD.SOURCESDIRECTORY)\**\*unit.test*.dll
-      !**\obj\**
-    runSettingsFile: '$(BUILD.SOURCESDIRECTORY)\src\unit.tests.$(BuildPlatform).runsettings'
-    codeCoverageEnabled: true
-    runInParallel: False
-    testRunTitle: 'Console Unit Tests'
-    platform: '$(BuildPlatform)'
-    configuration: '$(BuildConfiguration)'
+    targetType: filePath
+    filePath: build\scripts\Run-Tests.ps1
+    arguments: -MatchPattern '*unit.test*.dll' -Platform '$(RationalizedBuildPlatform)' -Configuration '$(BuildConfiguration)'
   condition: and(succeeded(), or(eq(variables['BuildPlatform'], 'x64'), eq(variables['BuildPlatform'], 'x86')))
 
-- task: VSTest@2
+- task: PowerShell@2
   displayName: 'Run Feature Tests (x64 only)'
   inputs:
-    testAssemblyVer2: |
-      $(BUILD.SOURCESDIRECTORY)\**\*feature.test*.dll
-      !**\obj\**
-    runSettingsFile: '$(BUILD.SOURCESDIRECTORY)\src\unit.tests.$(BuildPlatform).runsettings'
-    codeCoverageEnabled: true
-    runInParallel: False
-    testRunTitle: 'Console Feature Tests'
-    platform: '$(BuildPlatform)'
-    configuration: '$(BuildConfiguration)'
+    targetType: filePath
+    filePath: build\scripts\Run-Tests.ps1
+    arguments: -MatchPattern '*feature.test*.dll' -Platform '$(RationalizedBuildPlatform)' -Configuration '$(BuildConfiguration)'
   condition: and(succeeded(), eq(variables['BuildPlatform'], 'x64'))
 
 - task: CopyFiles@2

build/pipelines/templates/check-formatting.yml

@@ -6,6 +6,7 @@ jobs:
 
   steps:
   - checkout: self
+    fetchDepth: 1
     submodules: false
     clean: true
 

build/scripts/Run-Tests.ps1

@@ -0,0 +1,14 @@
+[CmdLetBinding()]
+Param(
+    [Parameter(Mandatory=$true, Position=0)][string]$MatchPattern,
+    [Parameter(Mandatory=$true, Position=1)][string]$Platform,
+    [Parameter(Mandatory=$true, Position=2)][string]$Configuration
+)
+
+$testdlls = Get-ChildItem -Path ".\bin\$Platform\$Configuration" -Recurse -Filter $MatchPattern
+
+&".\bin\$Platform\$Configuration\te.exe" $testdlls.FullName
+
+if ($lastexitcode -Ne 0) { Exit $lastexitcode }
+
+Exit 0

consolegit2gitfilters.json

@@ -17,7 +17,11 @@
     "/src/winconpty/",
     "/.nuget/",
     "/.github/",
-    "/samples/"
+    "/samples/",
+    "/res/terminal/",
+    "/doc/specs/",
+    "/doc/cascadia/",
+    "/doc/user-docs/"
   ],
   "SuffixFilters": [
     ".dbb",

custom.props

@@ -5,7 +5,7 @@
     <XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
     <XesBaseYearForStoreVersion>2020</XesBaseYearForStoreVersion>
     <VersionMajor>0</VersionMajor>
-    <VersionMinor>9</VersionMinor>
+    <VersionMinor>11</VersionMinor>
     <VersionInfoProductName>Windows Terminal</VersionInfoProductName>
   </PropertyGroup>
 </Project>

dep/dynamic_bitset/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2019 Maxime Pinard
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

dep/dynamic_bitset/MAINTAINER_README.md

@@ -0,0 +1,17 @@
+### Notes for Future Maintainers
+
+This was originally imported by @miniksa in March 2020.
+
+The provenance information (where it came from and which commit) is stored in the file `cgmanifest.json` in the same directory as this readme.
+Please update the provenance information in that file when ingesting an updated version of the dependent library.
+That provenance file is automatically read and inventoried by Microsoft systems to ensure compliance with appropiate governance standards.
+
+## What should be done to update this in the future?
+
+1. Go to pinam45/dynamic_bitset repository on GitHub.
+2. Take the entire contents of the include directory wholesale and drop it in the root directory here.
+3. Don't change anything about it.
+4. Validate that the license in the root of the repository didn't change and update it if so. It is sitting in the same directory as this readme. 
+   If it changed dramatically, ensure that it is still compatible with our license scheme. Also update the NOTICE file in the root of our repository to declare the third-party usage.
+5. Submit the pull.
+

dep/dynamic_bitset/cgmanifest.json

@@ -0,0 +1,13 @@
+{"Registrations":[ 
+    {
+      "component": { 
+       "type": "git", 
+       "git": { 
+         "repositoryUrl": "https://github.com/pinam45/dynamic_bitset", 
+         "commitHash": "00f2d066ce9deebf28b006636150e5a882beb83f" 
+         }
+       }
+    }
+ ],
+ "Version": 1
+}

dep/libpopcnt/LICENSE

@@ -0,0 +1,26 @@
+BSD 2-Clause License
+
+Copyright (c) 2016 - 2019, Kim Walisch
+Copyright (c) 2016 - 2019, Wojciech Muła
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

dep/libpopcnt/MAINTAINER_README.md

@@ -0,0 +1,17 @@
+### Notes for Future Maintainers
+
+This was originally imported by @miniksa in March 2020.
+
+The provenance information (where it came from and which commit) is stored in the file `cgmanifest.json` in the same directory as this readme.
+Please update the provenance information in that file when ingesting an updated version of the dependent library.
+That provenance file is automatically read and inventoried by Microsoft systems to ensure compliance with appropiate governance standards.
+
+## What should be done to update this in the future?
+
+1. Go to kimwalisch/libpopcnt repository on GitHub.
+2. Take the `libpopcnt.h` file.
+3. Don't change anything about it.
+4. Validate that the `LICENSE` in the root of the repository didn't change and update it if so. It is sitting in the same directory as this readme. 
+   If it changed dramatically, ensure that it is still compatible with our license scheme. Also update the NOTICE file in the root of our repository to declare the third-party usage.
+5. Submit the pull.
+

dep/libpopcnt/cgmanifest.json

@@ -0,0 +1,13 @@
+{"Registrations":[ 
+    {
+      "component": { 
+       "type": "git", 
+       "git": { 
+         "repositoryUrl": "https://github.com/kimwalisch/libpopcnt", 
+         "commitHash": "043a99fba31121a70bcb2f589faa17f534ae6085" 
+         }
+       }
+    }
+ ],
+ "Version": 1
+}

dep/libpopcnt/libpopcnt.h

@@ -0,0 +1,841 @@
+/*
+ * libpopcnt.h - C/C++ library for counting the number of 1 bits (bit
+ * population count) in an array as quickly as possible using
+ * specialized CPU instructions i.e. POPCNT, AVX2, AVX512, NEON.
+ *
+ * Copyright (c) 2016 - 2019, Kim Walisch
+ * Copyright (c) 2016 - 2018, Wojciech Muła
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LIBPOPCNT_H
+#define LIBPOPCNT_H
+
+#include <stdint.h>
+
+#ifndef __has_builtin
+  #define __has_builtin(x) 0
+#endif
+
+#ifndef __has_attribute
+  #define __has_attribute(x) 0
+#endif
+
+#ifdef __GNUC__
+  #define GNUC_PREREQ(x, y) \
+      (__GNUC__ > x || (__GNUC__ == x && __GNUC_MINOR__ >= y))
+#else
+  #define GNUC_PREREQ(x, y) 0
+#endif
+
+#ifdef __clang__
+  #define CLANG_PREREQ(x, y) \
+      (__clang_major__ > x || (__clang_major__ == x && __clang_minor__ >= y))
+#else
+  #define CLANG_PREREQ(x, y) 0
+#endif
+
+#if (_MSC_VER < 1900) && \
+    !defined(__cplusplus)
+  #define inline __inline
+#endif
+
+#if (defined(__i386__) || \
+     defined(__x86_64__) || \
+     defined(_M_IX86) || \
+     defined(_M_X64))
+  #define X86_OR_X64
+#endif
+
+#if defined(X86_OR_X64) && \
+   (defined(__cplusplus) || \
+    defined(_MSC_VER) || \
+   (GNUC_PREREQ(4, 2) || \
+    __has_builtin(__sync_val_compare_and_swap)))
+  #define HAVE_CPUID
+#endif
+
+#if GNUC_PREREQ(4, 2) || \
+    __has_builtin(__builtin_popcount)
+  #define HAVE_BUILTIN_POPCOUNT
+#endif
+
+#if GNUC_PREREQ(4, 2) || \
+    CLANG_PREREQ(3, 0)
+  #define HAVE_ASM_POPCNT
+#endif
+
+#if defined(HAVE_CPUID) && \
+   (defined(HAVE_ASM_POPCNT) || \
+    defined(_MSC_VER))
+  #define HAVE_POPCNT
+#endif
+
+#if defined(HAVE_CPUID) && \
+    GNUC_PREREQ(4, 9)
+  #define HAVE_AVX2
+#endif
+
+#if defined(HAVE_CPUID) && \
+    GNUC_PREREQ(5, 0)
+  #define HAVE_AVX512
+#endif
+
+#if defined(HAVE_CPUID) && \
+    defined(_MSC_VER) && \
+    defined(__AVX2__)
+  #define HAVE_AVX2
+#endif
+
+#if defined(HAVE_CPUID) && \
+    defined(_MSC_VER) && \
+    defined(__AVX512__)
+  #define HAVE_AVX512
+#endif
+
+#if defined(HAVE_CPUID) && \
+    CLANG_PREREQ(3, 8) && \
+    __has_attribute(target) && \
+   (!defined(_MSC_VER) || defined(__AVX2__)) && \
+   (!defined(__apple_build_version__) || __apple_build_version__ >= 8000000)
+  #define HAVE_AVX2
+  #define HAVE_AVX512
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * This uses fewer arithmetic operations than any other known
+ * implementation on machines with fast multiplication.
+ * It uses 12 arithmetic operations, one of which is a multiply.
+ * http://en.wikipedia.org/wiki/Hamming_weight#Efficient_implementation
+ */
+static inline uint64_t popcount64(uint64_t x)
+{
+  uint64_t m1 = 0x5555555555555555ll;
+  uint64_t m2 = 0x3333333333333333ll;
+  uint64_t m4 = 0x0F0F0F0F0F0F0F0Fll;
+  uint64_t h01 = 0x0101010101010101ll;
+
+  x -= (x >> 1) & m1;
+  x = (x & m2) + ((x >> 2) & m2);
+  x = (x + (x >> 4)) & m4;
+
+  return (x * h01) >> 56;
+}
+
+#if defined(HAVE_ASM_POPCNT) && \
+    defined(__x86_64__)
+
+static inline uint64_t popcnt64(uint64_t x)
+{
+  __asm__ ("popcnt %1, %0" : "=r" (x) : "0" (x));
+  return x;
+}
+
+#elif defined(HAVE_ASM_POPCNT) && \
+      defined(__i386__)
+
+static inline uint32_t popcnt32(uint32_t x)
+{
+  __asm__ ("popcnt %1, %0" : "=r" (x) : "0" (x));
+  return x;
+}
+
+static inline uint64_t popcnt64(uint64_t x)
+{
+  return popcnt32((uint32_t) x) +
+         popcnt32((uint32_t)(x >> 32));
+}
+
+#elif defined(_MSC_VER) && \
+      defined(_M_X64)
+
+#include <nmmintrin.h>
+
+static inline uint64_t popcnt64(uint64_t x)
+{
+  return _mm_popcnt_u64(x);
+}
+
+#elif defined(_MSC_VER) && \
+      defined(_M_IX86)
+
+#include <nmmintrin.h>
+
+static inline uint64_t popcnt64(uint64_t x)
+{
+  return _mm_popcnt_u32((uint32_t) x) + 
+         _mm_popcnt_u32((uint32_t)(x >> 32));
+}
+
+/* non x86 CPUs */
+#elif defined(HAVE_BUILTIN_POPCOUNT)
+
+static inline uint64_t popcnt64(uint64_t x)
+{
+  return __builtin_popcountll(x);
+}
+
+/* no hardware POPCNT,
+ * use pure integer algorithm */
+#else
+
+static inline uint64_t popcnt64(uint64_t x)
+{
+  return popcount64(x);
+}
+
+#endif
+
+static inline uint64_t popcnt64_unrolled(const uint64_t* data, uint64_t size)
+{
+  uint64_t i = 0;
+  uint64_t limit = size - size % 4;
+  uint64_t cnt = 0;
+
+  for (; i < limit; i += 4)
+  {
+    cnt += popcnt64(data[i+0]);
+    cnt += popcnt64(data[i+1]);
+    cnt += popcnt64(data[i+2]);
+    cnt += popcnt64(data[i+3]);
+  }
+
+  for (; i < size; i++)
+    cnt += popcnt64(data[i]);
+
+  return cnt;
+}
+
+#if defined(HAVE_CPUID)
+
+#if defined(_MSC_VER)
+  #include <intrin.h>
+  #include <immintrin.h>
+#endif
+
+/* %ecx bit flags */
+#define bit_POPCNT (1 << 23)
+
+/* %ebx bit flags */
+#define bit_AVX2   (1 << 5)
+#define bit_AVX512 (1 << 30)
+
+/* xgetbv bit flags */
+#define XSTATE_SSE (1 << 1)
+#define XSTATE_YMM (1 << 2)
+#define XSTATE_ZMM (7 << 5)
+
+static inline void run_cpuid(int eax, int ecx, int* abcd)
+{
+#if defined(_MSC_VER)
+  __cpuidex(abcd, eax, ecx);
+#else
+  int ebx = 0;
+  int edx = 0;
+
+  #if defined(__i386__) && \
+      defined(__PIC__)
+    /* in case of PIC under 32-bit EBX cannot be clobbered */
+    __asm__ ("movl %%ebx, %%edi;"
+             "cpuid;"
+             "xchgl %%ebx, %%edi;"
+             : "=D" (ebx),
+               "+a" (eax),
+               "+c" (ecx),
+               "=d" (edx));
+  #else
+    __asm__ ("cpuid;"
+             : "+b" (ebx),
+               "+a" (eax),
+               "+c" (ecx),
+               "=d" (edx));
+  #endif
+
+  abcd[0] = eax;
+  abcd[1] = ebx;
+  abcd[2] = ecx;
+  abcd[3] = edx;
+#endif
+}
+
+#if defined(HAVE_AVX2) || \
+    defined(HAVE_AVX512)
+
+static inline int get_xcr0()
+{
+  int xcr0;
+
+#if defined(_MSC_VER)
+  xcr0 = (int) _xgetbv(0);
+#else
+  __asm__ ("xgetbv" : "=a" (xcr0) : "c" (0) : "%edx" );
+#endif
+
+  return xcr0;
+}
+
+#endif
+
+static inline int get_cpuid()
+{
+  int flags = 0;
+  int abcd[4];
+
+  run_cpuid(1, 0, abcd);
+
+  if ((abcd[2] & bit_POPCNT) == bit_POPCNT)
+    flags |= bit_POPCNT;
+
+#if defined(HAVE_AVX2) || \
+    defined(HAVE_AVX512)
+
+  int osxsave_mask = (1 << 27);
+
+  /* ensure OS supports extended processor state management */
+  if ((abcd[2] & osxsave_mask) != osxsave_mask)
+    return 0;
+
+  int ymm_mask = XSTATE_SSE | XSTATE_YMM;
+  int zmm_mask = XSTATE_SSE | XSTATE_YMM | XSTATE_ZMM;
+
+  int xcr0 = get_xcr0();
+
+  if ((xcr0 & ymm_mask) == ymm_mask)
+  {
+    run_cpuid(7, 0, abcd);
+
+    if ((abcd[1] & bit_AVX2) == bit_AVX2)
+      flags |= bit_AVX2;
+
+    if ((xcr0 & zmm_mask) == zmm_mask)
+    {
+      if ((abcd[1] & bit_AVX512) == bit_AVX512)
+        flags |= bit_AVX512;
+    }
+  }
+
+#endif
+
+  return flags;
+}
+
+#endif /* cpuid */
+
+#if defined(HAVE_AVX2)
+
+#include <immintrin.h>
+
+#if !defined(_MSC_VER)
+  __attribute__ ((target ("avx2")))
+#endif
+static inline void CSA256(__m256i* h, __m256i* l, __m256i a, __m256i b, __m256i c)
+{
+  __m256i u = _mm256_xor_si256(a, b);
+  *h = _mm256_or_si256(_mm256_and_si256(a, b), _mm256_and_si256(u, c));
+  *l = _mm256_xor_si256(u, c);
+}
+
+#if !defined(_MSC_VER)
+  __attribute__ ((target ("avx2")))
+#endif
+static inline __m256i popcnt256(__m256i v)
+{
+  __m256i lookup1 = _mm256_setr_epi8(
+      4, 5, 5, 6, 5, 6, 6, 7,
+      5, 6, 6, 7, 6, 7, 7, 8,
+      4, 5, 5, 6, 5, 6, 6, 7,
+      5, 6, 6, 7, 6, 7, 7, 8
+  );
+
+  __m256i lookup2 = _mm256_setr_epi8(
+      4, 3, 3, 2, 3, 2, 2, 1,
+      3, 2, 2, 1, 2, 1, 1, 0,
+      4, 3, 3, 2, 3, 2, 2, 1,
+      3, 2, 2, 1, 2, 1, 1, 0
+  );
+
+  __m256i low_mask = _mm256_set1_epi8(0x0f);
+  __m256i lo = _mm256_and_si256(v, low_mask);
+  __m256i hi = _mm256_and_si256(_mm256_srli_epi16(v, 4), low_mask);
+  __m256i popcnt1 = _mm256_shuffle_epi8(lookup1, lo);
+  __m256i popcnt2 = _mm256_shuffle_epi8(lookup2, hi);
+
+  return _mm256_sad_epu8(popcnt1, popcnt2);
+}
+
+/*
+ * AVX2 Harley-Seal popcount (4th iteration).
+ * The algorithm is based on the paper "Faster Population Counts
+ * using AVX2 Instructions" by Daniel Lemire, Nathan Kurz and
+ * Wojciech Mula (23 Nov 2016).
+ * @see https://arxiv.org/abs/1611.07612
+ */
+#if !defined(_MSC_VER)
+  __attribute__ ((target ("avx2")))
+#endif
+static inline uint64_t popcnt_avx2(const __m256i* data, uint64_t size)
+{
+  __m256i cnt = _mm256_setzero_si256();
+  __m256i ones = _mm256_setzero_si256();
+  __m256i twos = _mm256_setzero_si256();
+  __m256i fours = _mm256_setzero_si256();
+  __m256i eights = _mm256_setzero_si256();
+  __m256i sixteens = _mm256_setzero_si256();
+  __m256i twosA, twosB, foursA, foursB, eightsA, eightsB;
+
+  uint64_t i = 0;
+  uint64_t limit = size - size % 16;
+  uint64_t* cnt64;
+
+  for(; i < limit; i += 16)
+  {
+    CSA256(&twosA, &ones, ones, data[i+0], data[i+1]);
+    CSA256(&twosB, &ones, ones, data[i+2], data[i+3]);
+    CSA256(&foursA, &twos, twos, twosA, twosB);
+    CSA256(&twosA, &ones, ones, data[i+4], data[i+5]);
+    CSA256(&twosB, &ones, ones, data[i+6], data[i+7]);
+    CSA256(&foursB, &twos, twos, twosA, twosB);
+    CSA256(&eightsA, &fours, fours, foursA, foursB);
+    CSA256(&twosA, &ones, ones, data[i+8], data[i+9]);
+    CSA256(&twosB, &ones, ones, data[i+10], data[i+11]);
+    CSA256(&foursA, &twos, twos, twosA, twosB);
+    CSA256(&twosA, &ones, ones, data[i+12], data[i+13]);
+    CSA256(&twosB, &ones, ones, data[i+14], data[i+15]);
+    CSA256(&foursB, &twos, twos, twosA, twosB);
+    CSA256(&eightsB, &fours, fours, foursA, foursB);
+    CSA256(&sixteens, &eights, eights, eightsA, eightsB);
+
+    cnt = _mm256_add_epi64(cnt, popcnt256(sixteens));
+  }
+
+  cnt = _mm256_slli_epi64(cnt, 4);
+  cnt = _mm256_add_epi64(cnt, _mm256_slli_epi64(popcnt256(eights), 3));
+  cnt = _mm256_add_epi64(cnt, _mm256_slli_epi64(popcnt256(fours), 2));
+  cnt = _mm256_add_epi64(cnt, _mm256_slli_epi64(popcnt256(twos), 1));
+  cnt = _mm256_add_epi64(cnt, popcnt256(ones));
+
+  for(; i < size; i++)
+    cnt = _mm256_add_epi64(cnt, popcnt256(data[i]));
+
+  cnt64 = (uint64_t*) &cnt;
+
+  return cnt64[0] +
+         cnt64[1] +
+         cnt64[2] +
+         cnt64[3];
+}
+
+/* Align memory to 32 bytes boundary */
+static inline void align_avx2(const uint8_t** p, uint64_t* size, uint64_t* cnt)
+{
+  for (; (uintptr_t) *p % 8; (*p)++)
+  {
+    *cnt += popcnt64(**p);
+    *size -= 1;
+  }
+  for (; (uintptr_t) *p % 32; (*p) += 8)
+  {
+    *cnt += popcnt64(
+        *(const uint64_t*) *p);
+    *size -= 8;
+  }
+}
+
+#endif
+
+#if defined(HAVE_AVX512)
+
+#include <immintrin.h>
+
+#if !defined(_MSC_VER)
+  __attribute__ ((target ("avx512bw")))
+#endif
+static inline __m512i popcnt512(__m512i v)
+{
+  __m512i m1 = _mm512_set1_epi8(0x55);
+  __m512i m2 = _mm512_set1_epi8(0x33);
+  __m512i m4 = _mm512_set1_epi8(0x0F);
+  __m512i t1 = _mm512_sub_epi8(v, (_mm512_srli_epi16(v, 1) & m1));
+  __m512i t2 = _mm512_add_epi8(t1 & m2, (_mm512_srli_epi16(t1, 2) & m2));
+  __m512i t3 = _mm512_add_epi8(t2, _mm512_srli_epi16(t2, 4)) & m4;
+
+  return _mm512_sad_epu8(t3, _mm512_setzero_si512());
+}
+
+#if !defined(_MSC_VER)
+  __attribute__ ((target ("avx512bw")))
+#endif
+static inline void CSA512(__m512i* h, __m512i* l, __m512i a, __m512i b, __m512i c)
+{
+  *l = _mm512_ternarylogic_epi32(c, b, a, 0x96);
+  *h = _mm512_ternarylogic_epi32(c, b, a, 0xe8);
+}
+
+/*
+ * AVX512 Harley-Seal popcount (4th iteration).
+ * The algorithm is based on the paper "Faster Population Counts
+ * using AVX2 Instructions" by Daniel Lemire, Nathan Kurz and
+ * Wojciech Mula (23 Nov 2016).
+ * @see https://arxiv.org/abs/1611.07612
+ */
+#if !defined(_MSC_VER)
+  __attribute__ ((target ("avx512bw")))
+#endif
+static inline uint64_t popcnt_avx512(const __m512i* data, const uint64_t size)
+{
+  __m512i cnt = _mm512_setzero_si512();
+  __m512i ones = _mm512_setzero_si512();
+  __m512i twos = _mm512_setzero_si512();
+  __m512i fours = _mm512_setzero_si512();
+  __m512i eights = _mm512_setzero_si512();
+  __m512i sixteens = _mm512_setzero_si512();
+  __m512i twosA, twosB, foursA, foursB, eightsA, eightsB;
+
+  uint64_t i = 0;
+  uint64_t limit = size - size % 16;
+  uint64_t* cnt64;
+
+  for(; i < limit; i += 16)
+  {
+    CSA512(&twosA, &ones, ones, data[i+0], data[i+1]);
+    CSA512(&twosB, &ones, ones, data[i+2], data[i+3]);
+    CSA512(&foursA, &twos, twos, twosA, twosB);
+    CSA512(&twosA, &ones, ones, data[i+4], data[i+5]);
+    CSA512(&twosB, &ones, ones, data[i+6], data[i+7]);
+    CSA512(&foursB, &twos, twos, twosA, twosB);
+    CSA512(&eightsA, &fours, fours, foursA, foursB);
+    CSA512(&twosA, &ones, ones, data[i+8], data[i+9]);
+    CSA512(&twosB, &ones, ones, data[i+10], data[i+11]);
+    CSA512(&foursA, &twos, twos, twosA, twosB);
+    CSA512(&twosA, &ones, ones, data[i+12], data[i+13]);
+    CSA512(&twosB, &ones, ones, data[i+14], data[i+15]);
+    CSA512(&foursB, &twos, twos, twosA, twosB);
+    CSA512(&eightsB, &fours, fours, foursA, foursB);
+    CSA512(&sixteens, &eights, eights, eightsA, eightsB);
+
+    cnt = _mm512_add_epi64(cnt, popcnt512(sixteens));
+  }
+
+  cnt = _mm512_slli_epi64(cnt, 4);
+  cnt = _mm512_add_epi64(cnt, _mm512_slli_epi64(popcnt512(eights), 3));
+  cnt = _mm512_add_epi64(cnt, _mm512_slli_epi64(popcnt512(fours), 2));
+  cnt = _mm512_add_epi64(cnt, _mm512_slli_epi64(popcnt512(twos), 1));
+  cnt = _mm512_add_epi64(cnt, popcnt512(ones));
+
+  for(; i < size; i++)
+    cnt = _mm512_add_epi64(cnt, popcnt512(data[i]));
+
+  cnt64 = (uint64_t*) &cnt;
+
+  return cnt64[0] +
+         cnt64[1] +
+         cnt64[2] +
+         cnt64[3] +
+         cnt64[4] +
+         cnt64[5] +
+         cnt64[6] +
+         cnt64[7];
+}
+
+/* Align memory to 64 bytes boundary */
+static inline void align_avx512(const uint8_t** p, uint64_t* size, uint64_t* cnt)
+{
+  for (; (uintptr_t) *p % 8; (*p)++)
+  {
+    *cnt += popcnt64(**p);
+    *size -= 1;
+  }
+  for (; (uintptr_t) *p % 64; (*p) += 8)
+  {
+    *cnt += popcnt64(
+        *(const uint64_t*) *p);
+    *size -= 8;
+  }
+}
+
+#endif
+
+/* x86 CPUs */
+#if defined(X86_OR_X64)
+
+/* Align memory to 8 bytes boundary */
+static inline void align_8(const uint8_t** p, uint64_t* size, uint64_t* cnt)
+{
+  for (; *size > 0 && (uintptr_t) *p % 8; (*p)++)
+  {
+    *cnt += popcount64(**p);
+    *size -= 1;
+  }
+}
+
+static inline uint64_t popcount64_unrolled(const uint64_t* data, uint64_t size)
+{
+  uint64_t i = 0;
+  uint64_t limit = size - size % 4;
+  uint64_t cnt = 0;
+
+  for (; i < limit; i += 4)
+  {
+    cnt += popcount64(data[i+0]);
+    cnt += popcount64(data[i+1]);
+    cnt += popcount64(data[i+2]);
+    cnt += popcount64(data[i+3]);
+  }
+
+  for (; i < size; i++)
+    cnt += popcount64(data[i]);
+
+  return cnt;
+}
+
+/*
+ * Count the number of 1 bits in the data array
+ * @data: An array
+ * @size: Size of data in bytes
+ */
+static inline uint64_t popcnt(const void* data, uint64_t size)
+{
+  const uint8_t* ptr = (const uint8_t*) data;
+  uint64_t cnt = 0;
+  uint64_t i;
+
+#if defined(HAVE_CPUID)
+  #if defined(__cplusplus)
+    /* C++11 thread-safe singleton */
+    static const int cpuid = get_cpuid();
+  #else
+    static int cpuid_ = -1;
+    int cpuid = cpuid_;
+    if (cpuid == -1)
+    {
+      cpuid = get_cpuid();
+
+      #if defined(_MSC_VER)
+        _InterlockedCompareExchange(&cpuid_, cpuid, -1);
+      #else
+        __sync_val_compare_and_swap(&cpuid_, -1, cpuid);
+      #endif
+    }
+  #endif
+#endif
+
+#if defined(HAVE_AVX512)
+
+  /* AVX512 requires arrays >= 1024 bytes */
+  if ((cpuid & bit_AVX512) &&
+      size >= 1024)
+  {
+    align_avx512(&ptr, &size, &cnt);
+    cnt += popcnt_avx512((const __m512i*) ptr, size / 64);
+    ptr += size - size % 64;
+    size = size % 64;
+  }
+
+#endif
+
+#if defined(HAVE_AVX2)
+
+  /* AVX2 requires arrays >= 512 bytes */
+  if ((cpuid & bit_AVX2) &&
+      size >= 512)
+  {
+    align_avx2(&ptr, &size, &cnt);
+    cnt += popcnt_avx2((const __m256i*) ptr, size / 32);
+    ptr += size - size % 32;
+    size = size % 32;
+  }
+
+#endif
+
+#if defined(HAVE_POPCNT)
+
+  if (cpuid & bit_POPCNT)
+  {
+    cnt += popcnt64_unrolled((const uint64_t*) ptr, size / 8);
+    ptr += size - size % 8;
+    size = size % 8;
+    for (i = 0; i < size; i++)
+      cnt += popcnt64(ptr[i]);
+
+    return cnt;
+  }
+
+#endif
+
+  /* pure integer popcount algorithm */
+  if (size >= 8)
+  {
+    align_8(&ptr, &size, &cnt);
+    cnt += popcount64_unrolled((const uint64_t*) ptr, size / 8);
+    ptr += size - size % 8;
+    size = size % 8;
+  }
+
+  /* pure integer popcount algorithm */
+  for (i = 0; i < size; i++)
+    cnt += popcount64(ptr[i]);
+
+  return cnt;
+}
+
+#elif defined(__ARM_NEON) || \
+      defined(__aarch64__)
+
+#include <arm_neon.h>
+
+/* Align memory to 8 bytes boundary */
+static inline void align_8(const uint8_t** p, uint64_t* size, uint64_t* cnt)
+{
+  for (; *size > 0 && (uintptr_t) *p % 8; (*p)++)
+  {
+    *cnt += popcnt64(**p);
+    *size -= 1;
+  }
+}
+
+static inline uint64x2_t vpadalq(uint64x2_t sum, uint8x16_t t)
+{
+  return vpadalq_u32(sum, vpaddlq_u16(vpaddlq_u8(t)));
+}
+
+/*
+ * Count the number of 1 bits in the data array
+ * @data: An array
+ * @size: Size of data in bytes
+ */
+static inline uint64_t popcnt(const void* data, uint64_t size)
+{
+  uint64_t cnt = 0;
+  uint64_t chunk_size = 64;
+  const uint8_t* ptr = (const uint8_t*) data;
+
+  if (size >= chunk_size)
+  {
+    uint64_t i = 0;
+    uint64_t iters = size / chunk_size;
+    uint64x2_t sum = vcombine_u64(vcreate_u64(0), vcreate_u64(0));
+    uint8x16_t zero = vcombine_u8(vcreate_u8(0), vcreate_u8(0));
+
+    do
+    {
+      uint8x16_t t0 = zero;
+      uint8x16_t t1 = zero;
+      uint8x16_t t2 = zero;
+      uint8x16_t t3 = zero;
+
+      /*
+       * After every 31 iterations we need to add the
+       * temporary sums (t0, t1, t2, t3) to the total sum.
+       * We must ensure that the temporary sums <= 255
+       * and 31 * 8 bits = 248 which is OK.
+       */
+      uint64_t limit = (i + 31 < iters) ? i + 31 : iters;
+  
+      /* Each iteration processes 64 bytes */
+      for (; i < limit; i++)
+      {
+        uint8x16x4_t input = vld4q_u8(ptr);
+        ptr += chunk_size;
+
+        t0 = vaddq_u8(t0, vcntq_u8(input.val[0]));
+        t1 = vaddq_u8(t1, vcntq_u8(input.val[1]));
+        t2 = vaddq_u8(t2, vcntq_u8(input.val[2]));
+        t3 = vaddq_u8(t3, vcntq_u8(input.val[3]));
+      }
+
+      sum = vpadalq(sum, t0);
+      sum = vpadalq(sum, t1);
+      sum = vpadalq(sum, t2);
+      sum = vpadalq(sum, t3);
+    }
+    while (i < iters);
+
+    uint64_t tmp[2];
+    vst1q_u64(tmp, sum);
+    cnt += tmp[0];
+    cnt += tmp[1];
+  }
+
+  size %= chunk_size;
+  align_8(&ptr, &size, &cnt);
+  const uint64_t* ptr64 = (const uint64_t*) ptr;
+  uint64_t iters = size / 8;
+
+  for (uint64_t i = 0; i < iters; i++)
+    cnt += popcnt64(ptr64[i]);
+
+  ptr += size - size % 8;
+  size = size % 8;
+
+  for (uint64_t i = 0; i < size; i++)
+    cnt += popcnt64(ptr[i]);
+
+  return cnt;
+}
+
+/* all other CPUs */
+#else
+
+/* Align memory to 8 bytes boundary */
+static inline void align_8(const uint8_t** p, uint64_t* size, uint64_t* cnt)
+{
+  for (; *size > 0 && (uintptr_t) *p % 8; (*p)++)
+  {
+    *cnt += popcnt64(**p);
+    *size -= 1;
+  }
+}
+
+/*
+ * Count the number of 1 bits in the data array
+ * @data: An array
+ * @size: Size of data in bytes
+ */
+static inline uint64_t popcnt(const void* data, uint64_t size)
+{
+  const uint8_t* ptr = (const uint8_t*) data;
+  uint64_t cnt = 0;
+  uint64_t i;
+
+  align_8(&ptr, &size, &cnt);
+  cnt += popcnt64_unrolled((const uint64_t*) ptr, size / 8);
+  ptr += size - size % 8;
+  size = size % 8;
+  for (i = 0; i < size; i++)
+    cnt += popcnt64(ptr[i]);
+
+  return cnt;
+}
+
+#endif
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* LIBPOPCNT_H */

doc/Niksa.md

@@ -33,7 +33,7 @@ Also, I'm happy to discuss this with you until you're utterly sick of reading it
 
 If I had to take an educated guess as to what is making us faster than pretty much any other application on Windows at putting your text on the screen... I would say it is because that is literally our only job! Also probably because we are using darn near the oldest and lowest level APIs that Windows has to accomplish this work.
 
-Pretty much everything else you've listed has some sort of layer or framework involved, or many, many layers and frameworks, when you start talking about Electron and Javascript. We don't. 
+Pretty much everything else you've listed has some sort of layer or framework involved, or many, many layers and frameworks, when you start talking about Electron and JavaScript. We don't. 
 
 We have one bare, super un-special window with no additional controls attached to it. We get our keys fed into us from just barely above the kernel given that we're processing them from window messages and not from some sort of eventing framework common to pretty much any other more complicated UI framework than ours (WPF, WinForms, UWP, Electron). And we dump our text straight onto the window surface using GDI's [PolyTextOut](https://docs.microsoft.com/en-us/windows/desktop/api/wingdi/nf-wingdi-polytextoutw) with no frills. 
 

doc/ORGANIZATION.md

@@ -28,10 +28,10 @@
 		* `/src/cascadia/TerminalConnection` - This DLL is responsible for the various different ways a terminal instance can communicate with different terminal backends. Examples include the `ConptyConnection` (for communicating with Windows Console processes), or the `AzureCloudShellConnection` for communicating with Azure.
 		* `/src/cascadia/TerminalSettings` - This is the DLL responsible for abstracting the settings for both the TerminalCore and the TerminalControl. This provides consumers of the TerminalControl a common interface for supplying settings to the Terminal.
 		* `/src/cascadia/TerminalCore` - This LIB is responsible for the core implementation of a terminal instance. This defines one important class `Terminal` which is a complete terminal instance, with buffer, colors table, VT parsing, input handling, etc. It does _not_ prescribe any sort of UI implementation - it should be connected to code that can handle rendering its contents, and provide input to it.
-		* `/src/cascadia/TerminalControl` - This DLL provides the UWP-XAML implementation of a `TermControl`, which can be embedded within an application to provide a terminal instance within the application. It contains a DX renderer for drawing text to the screen, and translates input to send to the core Terminal. It also recieves settings to apply to both itself and the core Terminal.
+		* `/src/cascadia/TerminalControl` - This DLL provides the UWP-XAML implementation of a `TermControl`, which can be embedded within an application to provide a terminal instance within the application. It contains a DX renderer for drawing text to the screen, and translates input to send to the core Terminal. It also receives settings to apply to both itself and the core Terminal.
 		* `/src/cascadia/TerminalApp` - This DLL represents the implementation of the Windows Terminal application. This includes parsing settings, hosting tabs & panes with Terminals in them, and displaying other UI elements. This DLL is almost entirely UWP-like code, and shouldn't be doing any Win32-like UI work.
 		* `/src/cascadia/WindowsTerminal` - This EXE provides Win32 hosting for the TerminalApp. It will set up XAML islands, and is responsible for drawing the window, either as a standard window or with content in the titlebar (non-client area).
-		* `/src/cascadia/CasadiaPackage` - This is a project for packaging the Windows Terminal and its dependencies into an .appx/.msix for deploying to the machine.
+		* `/src/cascadia/CascadiaPackage` - This is a project for packaging the Windows Terminal and its dependencies into an .appx/.msix for deploying to the machine.
 		* `/src/cascadia/PublicTerminalCore` - This is a DLL wrapper for the TerminalCore and Renderer, similar to `TermControl`, which exposes some exported functions that so the Terminal can be used from C#.
 		* `/src/cascadia/WpfTerminalControl` - A DLL implementing a WPF version of the Terminal Control.
 	* `/src/host` – The meat of the windows console host. This includes buffer, input, output, windowing, server management, clipboard, and most interactions with the console host window that aren’t stated anywhere else. We’re trying to pull things out that are reusable into other libraries, but it’s a work in progress

doc/building.md

@@ -1,13 +1,38 @@
 
-# How to build Openconsole
+# How to build OpenConsole
 
-Openconsole can be built with Visual Studio or from the command line. There are build scripts for both cmd and PowerShell in /tools.
+This repository uses [git submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its dependencies. To make sure submodules are restored or updated, be sure to run the following prior to building:
+
+```shell
+git submodule update --init --recursive
+```
+
+OpenConsole.sln may be built from within Visual Studio or from the command-line using a set of convenience scripts & tools in the **/tools** directory:
 
 When using Visual Studio, be sure to set up the path for code formatting. This can be done in Visual Studio by going to Tools > Options > Text Editor > C++ > Formatting and checking "Use custom clang-format.exe file" and choosing the clang-format.exe in the repository at /dep/llvm/clang-format.exe by clicking "browse" right under the check box.
 
-## Building with cmd
+### Building in PowerShell
 
-The cmd scripts are set up to emulate a portion of the OS razzle build environment. razzle.cmd is the first script that should be run. bcz.cmd will build clean and bz.cmd should build incrementally.
+```powershell
+Import-Module .\tools\OpenConsole.psm1
+Set-MsBuildDevEnvironment
+Invoke-OpenConsoleBuild
+```
+
+There are a few additional exported functions (look at their documentation for further details):
+
+- `Invoke-OpenConsoleBuild` - builds the solution. Can be passed msbuild arguments.
+- `Invoke-OpenConsoleTests` - runs the various tests. Will run the unit tests by default.
+- `Start-OpenConsole` - starts Openconsole.exe from the output directory. x64 is run by default.
+- `Debug-OpenConsole` - starts Openconsole.exe and attaches it to the default debugger. x64 is run by default.
+- `Invoke-CodeFormat` - uses clang-format to format all c++ files to match our coding style.
+
+### Building in Cmd
+
+```shell
+.\tools\razzle.cmd
+bcz
+```
 
 There are also scripts for running the tests:
 - `runut.cmd` - run the unit tests
@@ -15,15 +40,13 @@ There are also scripts for running the tests:
 - `runuia.cmd` - run the UIA tests
 - `runformat` - uses clang-format to format all c++ files to match our coding style.
 
-## Build with Powershell
+## Running & Debugging
 
-Openconsole.psm1 should be loaded with `Import-Module`. From there `Set-MsbuildDevEnvironment` will set up environment variables required to build. There are a few exported functions (look at their documentation for further details):
+To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the Solution Explorer) and go to properties. In the Debug menu, change "Application process" and "Background task process" to "Native Only".
 
-- `Invoke-OpenConsolebuild` - builds the solution. Can be passed msbuild arguments.
-- `Invoke-OpenConsoleTests` - runs the various tests. Will run the unit tests by default.
-- `Start-OpenConsole` - starts Openconsole.exe from the output directory. x64 is run by default.
-- `Debug-OpenConsole` - starts Openconsole.exe and attaches it to the default debugger. x64 is run by default.
-- `Invoke-CodeFormat` - uses clang-format to format all c++ files to match our coding style.
+You should then be able to build & debug the Terminal project by hitting <kbd>F5</kbd>.
+
+> 👉 You will _not_ be able to launch the Terminal directly by running the WindowsTerminal.exe. For more details on why, see [#926](https://github.com/microsoft/terminal/issues/926), [#4043](https://github.com/microsoft/terminal/issues/4043)
 
 ## Configuration Types
 
@@ -34,3 +57,27 @@ Openconsole has three configuration types:
 - AuditMode
 
 AuditMode is an experimental mode that enables some additional static analysis from CppCoreCheck.
+
+## Updating Nuget package references
+Certain Nuget package references in this project, like `Microsoft.UI.Xaml`, must be updated outside of the Visual Studio NuGet package manager. This can be done using the snippet below.
+> Note that to run this snippet, you need to use WSL as the command uses `sed`.
+To update the version of a given package, use the following snippet
+
+`git grep -z -l $PackageName | xargs -0 sed -i -e 's/$OldVersionNumber/$NewVersionNumber/g'`
+
+where:
+- `$PackageName` is the name of the package, e.g. Microsoft.UI.Xaml
+- `$OldVersionNumber` is the version number currently used, e.g. 2.3.191217003-prerelease
+- `$NewVersionNumber` is the version number you want to migrate to, e.g. 2.4.200117003-prerelease
+
+Example usage:
+
+`git grep -z -l Microsoft.UI.Xaml | xargs -0 sed -i -e 's/2.3.191217003-prerelease/2.4.200117003-prerelease/g'`
+
+## Using .nupkg files instead of downloaded Nuget packages
+If you want to use .nupkg files instead of the downloaded Nuget package, you can do this with the following steps:
+
+1. Open the Nuget.config file and uncomment line 8 ("Static Package Dependencies")
+2. Create the folder /dep/packages
+3. Put your .nupkg files in /dep/packages
+4. If you are using different versions than those already being used, you need to update the references as well. How to do that is explained under "Updating Nuget package references".

doc/cascadia/SettingsSchema.md

@@ -27,8 +27,9 @@ Properties listed below are specific to each unique profile.
 | Property | Necessity | Type | Default | Description |
 | -------- | --------- | ---- | ------- | ----------- |
 | `guid` | _Required_ | String | | Unique identifier of the profile. Written in registry format: `"{00000000-0000-0000-0000-000000000000}"`. |
-| `name` | _Required_ | String | | Name of the profile. Displays in the dropdown menu. <br>Additionally, this value will be used as the "title" to pass to the shell on startup. Some shells (like `bash`) may choose to ignore this initial value, while others (`cmd`, `powershell`) may use this value over the lifetime of the application. This "title" behavior can be overriden by using `tabTitle`. |
+| `name` | _Required_ | String | | Name of the profile. Displays in the dropdown menu. <br>Additionally, this value will be used as the "title" to pass to the shell on startup. Some shells (like `bash`) may choose to ignore this initial value, while others (`cmd`, `powershell`) may use this value over the lifetime of the application. This "title" behavior can be overridden by using `tabTitle`. |
 | `acrylicOpacity` | Optional | Number | `0.5` | When `useAcrylic` is set to `true`, it sets the transparency of the window for the profile. Accepts floating point values from 0-1. |
+| `antialiasingMode` | Optional | String | `"grayscale"` | Controls how text is antialiased in the renderer. Possible values are "grayscale", "cleartype" and "aliased". Note that changing this setting will require starting a new terminal instance. |
 | `background` | Optional | String | | Sets the background color of the profile. Overrides `background` set in color scheme if `colorscheme` is set. Uses hex color format: `"#rrggbb"`. |
 | `backgroundImage` | Optional | String | | Sets the file location of the Image to draw over the window background. |
 | `backgroundImageAlignment` | Optional | String | `center` | Sets how the background image aligns to the boundaries of the window. Possible values: `"center"`, `"left"`, `"top"`, `"right"`, `"bottom"`, `"topLeft"`, `"topRight"`, `"bottomLeft"`, `"bottomRight"` |
@@ -38,13 +39,13 @@ Properties listed below are specific to each unique profile.
 | `colorScheme` | Optional | String | `Campbell` | Name of the terminal color scheme to use. Color schemes are defined under `schemes`. |
 | `colorTable` | Optional | Array[String] | | Array of colors used in the profile if `colorscheme` is not set. Array follows the format defined in `schemes`. |
 | `commandline` | Optional | String | | Executable used in the profile. |
-| `cursorColor` | Optional | String | `#FFFFFF` | Sets the cursor color for the profile. Uses hex color format: `"#rrggbb"`. |
+| `cursorColor` | Optional | String | | Sets the cursor color of the profile. Overrides `cursorColor` set in color scheme if `colorscheme` is set. Uses hex color format: `"#rrggbb"`. |
 | `cursorHeight` | Optional | Integer | | Sets the percentage height of the cursor starting from the bottom. Only works when `cursorShape` is set to `"vintage"`. Accepts values from 25-100. |
 | `cursorShape` | Optional | String | `bar` | Sets the cursor shape for the profile. Possible values: `"vintage"` ( &#x2583; ), `"bar"` ( &#x2503; ), `"underscore"` ( &#x2581; ), `"filledBox"` ( &#x2588; ), `"emptyBox"` ( &#x25AF; ) |
-| `fontFace` | Optional | String | `Consolas` | Name of the font face used in the profile. We will try to fallback to Consolas if this can't be found or is invalid. |
+| `fontFace` | Optional | String | `Cascadia Code` | Name of the font face used in the profile. We will try to fallback to Consolas if this can't be found or is invalid. |
 | `fontSize` | Optional | Integer | `12` | Sets the font size. |
 | `foreground` | Optional | String | | Sets the foreground color of the profile. Overrides `foreground` set in color scheme if `colorscheme` is set. Uses hex color format: `#rgb` or `"#rrggbb"`. |
-| `hidden` | Optional | Boolean | `false` | If set to true, the profile will not appear in the list of profiles. This can be used to hide default profiles and dynamicially generated profiles, while leaving them in your settings file. |
+| `hidden` | Optional | Boolean | `false` | If set to true, the profile will not appear in the list of profiles. This can be used to hide default profiles and dynamically generated profiles, while leaving them in your settings file. |
 | `historySize` | Optional | Integer | `9001` | The number of lines above the ones displayed in the window you can scroll back to. |
 | `icon` | Optional | String | | Image file location of the icon used in the profile. Displays within the tab and the dropdown menu. |
 | `padding` | Optional | String | `8, 8, 8, 8` | Sets the padding around the text within the window. Can have three different formats: `"#"` sets the same padding for all sides, `"#, #"` sets the same padding for left-right and top-bottom, and `"#, #, #, #"` sets the padding individually for left, top, right, and bottom. |
@@ -55,7 +56,7 @@ Properties listed below are specific to each unique profile.
 | `startingDirectory` | Optional | String | `%USERPROFILE%` | The directory the shell starts in when it is loaded. |
 | `suppressApplicationTitle` | Optional | Boolean | | When set to `true`, `tabTitle` overrides the default title of the tab and any title change messages from the application will be suppressed. When set to `false`, `tabTitle` behaves as normal. |
 | `tabTitle` | Optional | String | | If set, will replace the `name` as the title to pass to the shell on startup. Some shells (like `bash`) may choose to ignore this initial value, while others (`cmd`, `powershell`) may use this value over the lifetime of the application.  |
-| `useAcrylic` | Optional | Boolean | `false` | When set to `true`, the window will have an acrylic background. When set to `false`, the window will have a plain, untextured background. |
+| `useAcrylic` | Optional | Boolean | `false` | When set to `true`, the window will have an acrylic background. When set to `false`, the window will have a plain, untextured background. The transparency only applies to focused windows due to OS limitation. |
 | `experimental.retroTerminalEffect` | Optional | Boolean | `false` | When set to `true`, enable retro terminal effects. This is an experimental feature, and its continued existence is not guaranteed. |
 
 ## Schemes
@@ -67,6 +68,7 @@ Properties listed below are specific to each color scheme. [ColorTool](https://g
 | `foreground` | _Required_ | String | Sets the foreground color of the color scheme. |
 | `background` | _Required_ | String | Sets the background color of the color scheme. |
 | `selectionBackground` | Optional | String | Sets the selection background color of the color scheme. |
+| `cursorColor` | Optional | String | Sets the cursor color of the color scheme. |
 | `black` | _Required_ | String | Sets the color used as ANSI black. |
 | `blue` | _Required_ | String | Sets the color used as ANSI blue. |
 | `brightBlack` | _Required_ | String | Sets the color used as ANSI bright black. |
@@ -91,69 +93,63 @@ Properties listed below are specific to each custom key binding.
 | -------- | ---- | ----------- | ----------- |
 | `command` | _Required_ | String | The command executed when the associated key bindings are pressed. |
 | `keys` | _Required_ | Array[String] | Defines the key combinations used to call the command. |
+| `action` | Optional | String | Adds additional functionality to certain commands. |
 
-### Implemented Commands
+### Implemented Commands and Actions
 
-Commands listed below are per the implementation in [`src/cascadia/TerminalApp/AppKeyBindingsSerialization.cpp`](https://github.com/microsoft/terminal/blob/master/src/cascadia/TerminalApp/AppKeyBindingsSerialization.cpp)
+Commands listed below are per the implementation in [`src/cascadia/TerminalApp/AppKeyBindingsSerialization.cpp`](https://github.com/microsoft/terminal/blob/master/src/cascadia/TerminalApp/AppKeyBindingsSerialization.cpp).
 
-- copy
-- copyTextWithoutNewlines
-- paste
-- newTab
-- openNewTabDropdown
-- duplicateTab
-- newTabProfile0
-- newTabProfile1
-- newTabProfile2
-- newTabProfile3
-- newTabProfile4
-- newTabProfile5
-- newTabProfile6
-- newTabProfile7
-- newTabProfile8
-- closeWindow
-- closeTab
-- closePane
-- switchToTab
-- nextTab
-- prevTab
-- increaseFontSize
-- decreaseFontSize
-- resetFontSize
-- scrollUp
-- scrollDown
-- scrollUpPage
-- scrollDownPage
-- switchToTab0
-- switchToTab1
-- switchToTab2
-- switchToTab3
-- switchToTab4
-- switchToTab5
-- switchToTab6
-- switchToTab7
-- switchToTab8
-- openSettings
-- splitPane
-- resizePaneLeft
-- resizePaneRight
-- resizePaneUp
-- resizePaneDown
-- moveFocusLeft
-- moveFocusRight
-- moveFocusUp
-- moveFocusDown
-- toggleFullscreen
-- find
+Keybindings can be structured in the following manners:
 
-## Example Keys
-- ctrl+1
-- ctrl+plus
-- alt+-
-- shift+numpad_1
-- ctrL+shift+numpad_plus
-- ctrl+pgdn
-- ctrl+alt+shift+pgup
+For commands without arguments:
+<br>
+`{ "command": "commandName", "keys": [ "modifiers+key" ] }`
+
+For commands with arguments:
+<br>
+`{ "command": { "action": "commandName", "argument": "value" }, "keys": ["modifiers+key"] }`
+
+| Command | Command Description | Action (*=required) | Action Arguments | Argument Descriptions |
+| ------- | ------------------- | ------ | ---------------- | ----------------- |
+| `closePane` | Close the active pane. | | | |
+| `closeTab` | Close the current tab. | | | |
+| `closeWindow` | Close the current window and all tabs within it. | | | |
+| `copy` | Copy the selected terminal content to your Windows Clipboard. | `trimWhitespace` | boolean | When `true`, newlines persist from the selected text. When `false`, copied content will paste on one line. |
+| `decreaseFontSize` | Make the text smaller by one delta. | `delta` | integer | Amount of size decrease per command invocation. |
+| `duplicateTab` | Make a copy and open the current tab. | | | |
+| `find` | Open the search dialog box. | | | |
+| `increaseFontSize` | Make the text larger by one delta. | `delta` | integer | Amount of size increase per command invocation. |
+| `moveFocus` | Focus on a different pane depending on direction. | `direction`* | `left`, `right`, `up`, `down` | Direction in which the focus will move. |
+| `newTab` | Create a new tab. Without any arguments, this will open the default profile in a new tab. | 1. `commandLine`<br>2. `startingDirectory`<br>3. `tabTitle`<br>4. `index`<br>5. `profile` | 1. string<br>2. string<br>3. string<br>4. integer<br>5. string | 1. Executable run within the tab.<br>2. Directory in which the tab will open.<br>3. Title of the new tab.<br>4. Profile that will open based on its position in the dropdown (starting at 0).<br>5. Profile that will open based on its GUID or name. |
+| `nextTab` | Open the tab to the right of the current one. | | | |
+| `openNewTabDropdown` | Open the dropdown menu. | | | |
+| `openSettings` | Open the settings file. | | | |
+| `paste` | Insert the content that was copied onto the clipboard. | | | |
+| `prevTab` | Open the tab to the left of the current one. | | | |
+| `resetFontSize` | Reset the text size to the default value. | | | |
+| `resizePane` | Change the size of the active pane. | `direction`* | `left`, `right`, `up`, `down` | Direction in which the pane will be resized. |
+| `scrollDown` | Move the screen down. | | | |
+| `scrollUp` | Move the screen up. | | | |
+| `scrollUpPage` | Move the screen up a whole page. | | | |
+| `scrollDownPage` | Move the screen down a whole page. | | | |
+| `splitPane` | Halve the size of the active pane and open another. Without any arguments, this will open the default profile in the new pane. | 1. `split`*<br>2. `commandLine`<br>3. `startingDirectory`<br>4. `tabTitle`<br>5. `index`<br>6. `profile` | 1. `vertical`, `horizontal`, `auto`<br>2. string<br>3. string<br>4. string<br>5. integer<br>6. string | 1. How the pane will split. `auto` will split in the direction that provides the most surface area.<br>2. Executable run within the pane.<br>3. Directory in which the pane will open.<br>4. Title of the tab when the new pane is focused.<br>5. Profile that will open based on its position in the dropdown (starting at 0).<br>6. Profile that will open based on its GUID or name. |
+| `switchToTab` | Open a specific tab depending on index. | `index`* | integer | Tab that will open based on its position in the tab bar (starting at 0). |
+| `toggleFullscreen` | Switch between fullscreen and default window sizes. | | | |
+| `unbound` | Unbind the associated keys from any command. | | | |
+
+### Accepted Modifiers and Keys
+
+#### Modifiers
+`Ctrl+`, `Shift+`, `Alt+`
+
+#### Keys
+| Type | Keys |
+| ---- | ---- |
+| Function and Alphanumeric Keys | `f1-f24`, `a-z`, `0-9` |
+| Symbols | ``` ` ```, `-`, `=`, `[`, `]`, `\`, `;`, `'`, `,`, `.`, `/` |
+| Arrow Keys | `down`, `left`, `right`, `up`, `pagedown`, `pageup`, `pgdn`, `pgup`, `end`, `home`, `plus` |
+| Action Keys | `tab`, `enter`, `esc`, `escape`, `space`, `backspace`, `delete`, `insert` |
+| Numpad Keys | `numpad_0-numpad_9`, `numpad0-numpad9`, `numpad_add`, `numpad_plus`, `numpad_decimal`, `numpad_period`, `numpad_divide`, `numpad_minus`, `numpad_subtract`, `numpad_multiply` |
 
 ## Background Images and Icons
 Some Terminal settings allow you to specify custom background images and icons. It is recommended that custom images and icons are stored in system-provided folders and are referred to using the correct [URI Schemes](https://docs.microsoft.com/en-us/windows/uwp/app-resources/uri-schemes). URI Schemes provide a way to reference files independent of their physical paths (which may change in the future).

doc/cascadia/Unittesting-CppWinRT-Xaml.md

@@ -68,7 +68,7 @@ original files. You could alternatively put all the source in one directory, and
 have separate `dll/` and `lib/` subdirectories from the source that are solely
 responsible for building their binary.
 
-At this point, you might face some difficulty including the right wimnd
+At this point, you might face some difficulty including the right winmd
 references, especially from other C++/WinRT dependencies for this project that
 exist in your solution. I don't know why, but I had a fair amount of difficulty
 using a `ProjectReference` from a C++/WinRT StaticLibrary to another C++/WinRT

doc/cascadia/profiles.schema.json

@@ -3,6 +3,11 @@
   "$schema": "http://json-schema.org/draft-07/schema#",
   "title": "Microsoft's Windows Terminal Settings Profile Schema'",
   "definitions": {
+    "KeyChordSegment": {
+      "pattern": "^(?<modifier>(ctrl|alt|shift)(?:\\+(ctrl|alt|shift)(?<!\\2))?(?:\\+(ctrl|alt|shift)(?<!\\2|\\3))?\\+)?(?<key>[^\\s+]|backspace|tab|enter|esc|escape|space|pgup|pageup|pgdn|pagedown|end|home|left|up|right|down|insert|delete|(?<!shift.+)(?:numpad_?[0-9]|numpad_(?:period|decimal))|numpad_(?:multiply|plus|add|minus|subtract|divide)|f[1-9]|f1[0-9]|f2[0-4]|plus)$",
+      "type": "string",
+      "description": "The string should fit the format \"[ctrl+][alt+][shift+]<keyName>\", where each modifier is optional, separated by + symbols, and keyName is either one of the names listed in the table below, or any single key character. The string should be written in full lowercase.\nbackspace\tBACKSPACE key\ntab\tTAB key\nenter\tENTER key\nesc, escape\tESC key\nspace\tSPACEBAR\npgup, pageup\tPAGE UP key\npgdn, pagedown\tPAGE DOWN key\nend\tEND key\nhome\tHOME key\nleft\tLEFT ARROW key\nup\tUP ARROW key\nright\tRIGHT ARROW key\ndown\tDOWN ARROW key\ninsert\tINS key\ndelete\tDEL key\nnumpad_0-numpad_9, numpad0-numpad9\tNumeric keypad keys 0 to 9. Can't be combined with the shift modifier.\nnumpad_multiply\tNumeric keypad MULTIPLY key (*)\nnumpad_plus, numpad_add\tNumeric keypad ADD key (+)\nnumpad_minus, numpad_subtract\tNumeric keypad SUBTRACT key (-)\nnumpad_period, numpad_decimal\tNumeric keypad DECIMAL key (.). Can't be combined with the shift modifier.\nnumpad_divide\tNumeric keypad DIVIDE key (/)\nf1-f24\tF1 to F24 function keys\nplus\tADD key (+)"
+    },
     "Color": {
       "default": "#",
       "pattern": "^#([A-Fa-f0-9]{6}|[A-Fa-f0-9]{3})$",
@@ -244,12 +249,18 @@
         },
         "keys": {
           "description": "Defines the key combinations used to call the command.",
-          "items": {
-            "pattern": "^(?<modifier>(ctrl|alt|shift)\\+?((ctrl|alt|shift)(?<!\\2)\\+?)?((ctrl|alt|shift)(?<!\\2|\\4))?\\+?)?(?<key>[^+\\s]+?)?(?<=[^+\\s])$",
-            "type": "string"
-          },
-          "minItems": 1,
-          "type": "array"
+          "oneOf": [
+            {
+              "$ref": "#/definitions/KeyChordSegment"
+            },
+            {
+              "items": {
+                "$ref": "#/definitions/KeyChordSegment"
+              },
+              "minItems": 1,
+              "type": "array"
+            }
+          ]
         }
       },
       "required": [
@@ -378,9 +389,20 @@
           "minimum": 0,
           "type": "number"
         },
+        "antialiasingMode": {
+          "default": "grayscale",
+          "description": "Controls how text is antialiased in the renderer. Possible values are \"grayscale\", \"cleartype\" and \"aliased\". Note that changing this setting will require starting a new terminal instance.",
+          "enum": [
+            "grayscale",
+            "cleartype",
+            "aliased"
+          ],
+          "type": "string"
+        },
         "background": {
           "$ref": "#/definitions/Color",
-          "description": "Sets the background color of the profile. Overrides background set in color scheme if colorscheme is set. Uses hex color format: \"#rrggbb\". Default \"#000000\" (black).",
+          "default": "#0c0c0c",
+          "description": "Sets the background color of the profile. Overrides background set in color scheme if colorscheme is set. Uses hex color format: \"#rrggbb\".",
           "type": ["string", "null"]
         },
         "backgroundImage": {
@@ -533,8 +555,7 @@
         },
         "cursorColor": {
           "$ref": "#/definitions/Color",
-          "default": "#FFFFFF",
-          "description": "Sets the cursor color for the profile. Uses hex color format: \"#rrggbb\"."
+          "description": "Sets the cursor color of the profile. Overrides cursor color set in color scheme if colorscheme is set. Uses hex color format: \"#rrggbb\"."
         },
         "cursorHeight": {
           "description": "Sets the percentage height of the cursor starting from the bottom. Only works when cursorShape is set to \"vintage\". Accepts values from 25-100.",
@@ -559,7 +580,7 @@
           "type": "boolean"
         },
         "fontFace": {
-          "default": "Consolas",
+          "default": "Cascadia Code",
           "description": "Name of the font face used in the profile.",
           "type": "string"
         },
@@ -571,7 +592,8 @@
         },
         "foreground": {
           "$ref": "#/definitions/Color",
-          "description": "Sets the foreground color of the profile. Overrides foreground set in color scheme if colorscheme is set. Uses hex color format: \"#rrggbb\". Default \"#ffffff\" (white).",
+          "default": "#cccccc",
+          "description": "Sets the foreground color of the profile. Overrides foreground set in color scheme if colorscheme is set. Uses hex color format: \"#rrggbb\".",
           "type": ["string", "null"]
         },
         "guid": {
@@ -580,7 +602,7 @@
         },
         "hidden": {
           "default": false,
-          "description": "If set to true, the profile will not appear in the list of profiles. This can be used to hide default profiles and dynamicially generated profiles, while leaving them in your settings file.",
+          "description": "If set to true, the profile will not appear in the list of profiles. This can be used to hide default profiles and dynamically generated profiles, while leaving them in your settings file.",
           "type": "boolean"
         },
         "historySize": {
@@ -724,6 +746,11 @@
             "$ref": "#/definitions/Color",
             "description": "Sets the color used as ANSI bright yellow."
           },
+          "cursorColor": {
+            "$ref": "#/definitions/Color",
+            "default": "#FFFFFF",
+            "description": "Sets the cursor color of the color scheme."
+          },
           "cyan": {
             "$ref": "#/definitions/Color",
             "description": "Sets the color used as ANSI cyan."

doc/specs/#1043 - Set the initial position of the Terminal/spec.md

@@ -80,11 +80,11 @@ More data reading and calculation will be included in Terminal Launch process, w
 
 ## Potential Issues
 
-We need to consider multi-monitor scenario. If the user has multiple monitors, we must guarantee that the Terminal could be iniitalized as expected. We can keep an eye on the feedbacks of this feature from the community.
+We need to consider multi-monitor scenario. If the user has multiple monitors, we must guarantee that the Terminal could be initialized as expected. We can keep an eye on the feedbacks of this feature from the community.
 
 ## Future considerations
 
-For now, this feature only allows the user to set initial positon and choose whether to maximize the window when launch. In the future, we may consider follow-up features like:
+For now, this feature only allows the user to set initial position and choose whether to maximize the window when launch. In the future, we may consider follow-up features like:
 
 1. Save the position of the Terminal on exit, and restore the position on the next launch. This could be a true/false feature that users could choose to set.
 

doc/specs/#1142 - Keybinding Arguments.md

@@ -340,7 +340,7 @@ N/A
   For example, by default, <kbd>Alt+&lt;N&gt;</kbd> to focuses the
   Nth tab. Currently, those are 8 separate entries in the keybindings. Should we
   enable some way for them be combined into a single binding entry, where the
-  binding automatically recieves the number pressed as an arg? I couldn't find
+  binding automatically receives the number pressed as an arg? I couldn't find
   any prior art of this, so it doesn't seem worth it to try and invent
   currently. This might be something that we want to loop back on, but for the
   time being, it remains out of scope of this PR.

doc/specs/#1235 - Azure cloud shell connector/spec.md

@@ -53,7 +53,7 @@ This feature will not impact reliability of Windows Terminal.
 
 ### Compatibility
 
-With the implementation being mostly decoupled from the Windows Terminal app itself, no existing code/behaviours should break due to this feature. 
+With the implementation being mostly decoupled from the Windows Terminal app itself, no existing code/behaviors should break due to this feature. 
 
 ### Performance, Power, and Efficiency
 

doc/specs/#2325 - Default Profile Settings.md

@@ -281,8 +281,8 @@ of the file.
 `inheritFrom` is very unique relative to other keys we already have.
 
 ##### Powerful
-This lets the user have potentially many layers of settings grouping. hese
-layers would let the user seperate out common settings however they like,
+This lets the user have potentially many layers of settings grouping. These
+layers would let the user separate out common settings however they like,
 without forcing them to a single "default" profile. They could potentially have
 many "default" profiles, e.g.
 * one that's used for all their WSL profiles, with `startingDirectory` set to

doc/specs/#2563 - closeOnExit and TerminalConnection evolution.md

@@ -28,7 +28,7 @@ Other terminal emulators like ConEmu have a similar feature.
         * This enum attempts to encompass all potential connection states, even those which do not make sense for a local terminal.
         * The wide variety of values will be useful to indicate state changes in a user interface.
         * `NotConnected`: All new connections will start out in this state
-        * `Connecting`: The connection has been initated, but has not yet completed connecting.
+        * `Connecting`: The connection has been initiated, but has not yet completed connecting.
         * `Connected`: The connection is active.
         * `Closing`: The connection is being closed (usually by request).
         * `Closed`: The connection has been closed, either by request or from the remote end terminating successfully.
@@ -48,7 +48,7 @@ Other terminal emulators like ConEmu have a similar feature.
 
 ### Application and Settings
 
-1. The existing `closeOnExit` profile key will be replaced with an enumerated string key supporting the following values (behaviours):
+1. The existing `closeOnExit` profile key will be replaced with an enumerated string key supporting the following values (behaviors):
     * `always` - a tab or pane hosting this profile will always be closed when the launched connection reaches a terminal state.
     * `graceful` - a tab or pane hosting this profile will be closed if and only if the launched connection reaches the `Closed` terminal state.
     * `never` - a tab or pane hosting this profile will not automatically close.

doc/specs/#532 - Panes and Split Windows.md

@@ -53,7 +53,7 @@ When a pane is a parent, its two children are either split vertically or
 horizontally. Parent nodes don't have a terminal of their own, they merely
 display the terminals of their children.
 
- * If a Pane is split vertically, the two panes are seperated by a vertical
+ * If a Pane is split vertically, the two panes are separated by a vertical
    split, as to appear side-by-side. Think `[|]`
  * If a Pane is split horizontally, the two panes are split by a horizontal
    separator, and appear above/below one another. Think `[-]`.
@@ -228,7 +228,7 @@ pane. This could be solved a number of ways. There could be keyboard shortcuts
 for swapping the positions of tabs, or a shortcut for both "zooming" a tab
 (temporarily making it the full size) or even popping a pane out to it's own
 tab. Additionally, a right-click menu option could be added to do the
-aformentioned actions. Discoverability of these two actions is not as high as
+aforementioned actions. Discoverability of these two actions is not as high as
 just dragging a tab from one pane to another; however, it's believed that panes
 are more of a power-user scenario, and power users will not necessarily be
 turned off by the feature's discoverability.

doc/specs/#605 - Search/spec.md

@@ -30,7 +30,7 @@ Conhost already has a module for search. It implements case sensitive or insensi
 
 We will create a `SearchBoxControl` Xaml `UserControl` element. When a search process begins, a `SearchBoxControl` object will be created and attached to `TermControl` root grid. In other words, one SearchBox is added for each `TermControl`. The reasons for this design is:
 
-1. Each `TermControl` object is a Terminal Window and has a individual text buffer. In phase 1 we are going to search witin the current terminal text buffer. 
+1. Each `TermControl` object is a Terminal Window and has a individual text buffer. In phase 1 we are going to search within the current terminal text buffer. 
 2. If we put the search box under TerminalApp, then the search can only happen on the current focused Terminal. 
 3. If the community does not like the current design, we can lift SearchBox to a higher level. 
 
@@ -50,7 +50,7 @@ We will create a `SearchBoxControl` Xaml `UserControl` element. When a search pr
 
 Above is the `SearchBoxControl` in dark theme and light theme.
   - The two buttons with up/down arrows controls the search direction, Each button will be styled to indicate which search direction is currently selected. 
-  - The button with a "Aa" icon, if pressed, means that we are searching case-sensitivily. 
+  - The button with a "Aa" icon, if pressed, means that we are searching case-sensitivity. 
   - The current style puts all elements - the `X` button, the text box and the search pattern control buttons on one single line. This ensures that the `SearchBoxControl` won't be too high and block terminal text. This is similar with VSCode. Another possible layout style is to put elements in multiple layers. This will occupy more lines, but the search dialog will narrower. Considering that there is not many elements, we do not need multiple layers. 
 
 ![SearchBox mockup, arrow button clicked](images/SearchBoxUpSelected.png)
@@ -92,7 +92,7 @@ This feature should not introduce any new security issues.
 ### Reliability
 
 1. The key input of Terminal command line and the search box should be separated. Search box should not block interaction with the command line when it is open. 
-2. The search box should not block too much text. The search box only occupies one line, so it won't have big impact on the readibility of the terminal output. 
+2. The search box should not block too much text. The search box only occupies one line, so it won't have big impact on the readability of the terminal output. 
 
 ### Compatibility
 
@@ -106,7 +106,7 @@ This feature only launches in need. It does not impact the performance of Termin
                                                               
 1. If the terminal window is not wide enough for the search box to be visible, the buttons on the right of the `TextBox` will become invisible, but the `TextBox` is still visible and the window could not be narrower than the `TextBox`. This is similar to the behavior of other editors. Please see the image below:
    ![SearchBox width not enough](images/SearchBoxControlNoEnoughWidth.png)
-2. If the terminal window is not high enough for the search box to be visible, the whole terminal screen, inlcuding the `SearchBoxControl` can disappear. This is similar to the behavior of other editors.
+2. If the terminal window is not high enough for the search box to be visible, the whole terminal screen, including the `SearchBoxControl` can disappear. This is similar to the behavior of other editors.
 
 ## Future considerations
 

doc/specs/#607 - Commandline Arguments for the Windows Terminal.md

@@ -92,7 +92,7 @@ would quickly become hard to parse and understand for the user.
 
 ### Proposal 2 - Commands and Parameters
 
-Instead, we'll try to seperate these arguments by their responsibilities. Some
+Instead, we'll try to separate these arguments by their responsibilities. Some
 of these arguments cause something to happen, like `help`, `version`, or
 `open-settings`. Other arguments act more like modifiers, like for example
 `--profile` or `--startingDirectory`, which provide additional information to
@@ -275,7 +275,7 @@ terminal window.
 `list-profiles [--all,-A] [--showGuids,-g]`
 
 Displays a list of each of the available profiles. Each profile displays it's
-name, seperated by newlines.
+name, separated by newlines.
 
 **Parameters**:
 * `--all,-A`: Show all profiles, including profiles marked `"hidden": true`.
@@ -323,7 +323,7 @@ vertically or horizontally.
 **Parameters**:
 * `--target,-t target-pane`: Creates a new split in the given `target-pane`.
   Each pane has a unique index (per-tab) which can be used to identify them.
-  These indicies are assigned in the order the panes were created. If omitted,
+  These indices are assigned in the order the panes were created. If omitted,
   defaults to the index of the currently focused pane.
 * `-H`, `-V`: Used to indicate which direction to split the pane. `-V` is
   "vertically" (think `[|]`), and `-H` is "horizontally" (think `[-]`). If
@@ -355,7 +355,7 @@ Moves focus within the currently focused tab to a given pane.
 
 * `--target,-t target-pane`: moves focus to the given `target-pane`. Each pane
   has a unique index (per-tab) which can be used to identify them. These
-  indicies are assigned in the order the panes were created. If omitted,
+  indices are assigned in the order the panes were created. If omitted,
   defaults to the index of the currently focused pane (which is effectively a
   no-op).
 
@@ -410,7 +410,7 @@ like `guid` and `name`, as well as high priority properties to add as arguments.
 Following an investigation performed the week of Nov 18th, 2019, I've determined
 that we should be able to use the [CLI11] open-source library to parse
 our arguments. We'll need to add some additional logic on top of CLI11 in order
-to properly seperate commands with `;`, but that's not impossible to achieve.
+to properly separate commands with `;`, but that's not impossible to achieve.
 
 CLI11 will allow us to parse commandlines as a series of options, with a
 possible sub-command that takes its own set of parameters. This functionality
@@ -440,7 +440,7 @@ developed, to make the initialization of many commands as seamless as possible.
 As this is a very complex feature, there will need to be a number of steps taken
 in the codebase to enable this functionality in a way that users are expecting.
 The following is a suggestion of the individual changelists that could be made
-to iteratively work towards fulling implementing this funcionality.
+to iteratively work towards fulling implementing this functionality.
 
 * [x] Refactor `ShortcutAction` dispatching into its own class
   - Right now, the `AppKeyBindings` is responsible for triggering all
@@ -507,7 +507,7 @@ runtimeclass TerminalParameters {
 * [ ] Add a `ShortcutAction` for `FocusPane`, which accepts a single parameter
   `index`.
   - We'll need to track each `Pane`'s ID as `Pane`s are created, so that we can
-    quicky switch to the i'th `Pane`.
+    quickly switch to the i'th `Pane`.
   - This is in order to support the `-t,--target` parameter of `split-pane`.
 
 ## Capabilities
@@ -537,7 +537,7 @@ This change should not regress any existing behaviors.
 
 ### Performance, Power, and Efficiency
 
-This change should not particularily impact startup time or any of these other categories.
+This change should not particularly impact startup time or any of these other categories.
 
 ## Potential Issues
 
@@ -549,7 +549,7 @@ itself, we'll use `\;` as an escaped `;` within the commandline. This is an area
 we've been caught in before, so extensive testing will be necessary to make sure
 this works as expected.
 
-Painfully, powershell uses `;` as a seperator between commands as well. So, if
+Painfully, powershell uses `;` as a separator between commands as well. So, if
 someone wanted to call a `wt` commandline in powershell with multiple commands,
 the user would need to also escape those semicolons for powershell first. That
 means a command like ```wt new-tab ; split-pane``` would need to be ```wt new-tab

doc/specs/#754 - Cascading Default Settings.md

@@ -520,7 +520,7 @@ would `openDefaultSettings`, and we could bind that to
 ### How does this work with the settings UI?
 
 If we only have one version of the settings models (Globals, Profiles,
-ColorShemes, Keybindings) at runtime, and the user changes one of the settings
+ColorSchemes, Keybindings) at runtime, and the user changes one of the settings
 with the settings UI, how can we tell that settings changed?
 
 Fortunately, this should be handled cleanly by the algorithm proposed above, in
@@ -678,7 +678,7 @@ generators _must_ be enabled to use the dynamic profiles.
   a WinRT interface that extensions could implement, and be triggered just like
   other dynamic profile generators.
 * **Multiple settings files** - This could enable us to place color schemes into
-  a seperate file (like `colorschemes.json`) and put keybindings into their own
+  a separate file (like `colorschemes.json`) and put keybindings into their own
   file as well, and reduce the number of settings in the user's `profiles.json`.
   It's unclear if this is something that we need quite yet, but the same
   layering functionality that enables this scenario could also enable more than

doc/specs/#976 - VT52 escape sequences.md

@@ -229,7 +229,7 @@ This should not introduce any new reliability issues.
 
 ### Compatibility
 
-This could be a breaking change for code that relies on the few existing VT52 commands being available without a mode change. However, that functionality is non-standard, and has not been around for that long. There is almost certainly more benefit in being able to implement the missing VT100 functionality than there is in retaining that non-standard behaviour.
+This could be a breaking change for code that relies on the few existing VT52 commands being available without a mode change. However, that functionality is non-standard, and has not been around for that long. There is almost certainly more benefit in being able to implement the missing VT100 functionality than there is in retaining that non-standard behavior.
 
 ### Performance, Power, and Efficiency
 

doc/specs/spec-template.md

@@ -37,7 +37,7 @@ issue id: <github issue id>
 
 ### Reliability
 
-[comment]: # Will the proposed change improve reliabilty? If not, why make the change?
+[comment]: # Will the proposed change improve reliability? If not, why make the change?
 
 ### Compatibility
 

doc/terminal-v1-roadmap.md

@@ -34,7 +34,7 @@ Ultimately, we're aiming for Terminal v1.0 to be feature-complete by Dec 2019, a
 | 2020-01-28 | Beta 1 | Pri 0/1/2 Bug fixes & polish |
 | 2020-02-25 | Beta 2 | Pri 0/1 Bug fixes & polish |
 | 2020-03-24 | RC | Pri 0 bug fixes |
-| 2020-04-01 ? | v1.0 | Terminal v1.0 Release |
+| 2020-05    | v1.0 | Terminal v1.0 Release |
 
 ## GitHub Milestones
 

doc/user-docs/ThirdPartyToolProfiles.md

@@ -15,7 +15,7 @@ Assuming that you've installed Anaconda into `%USERPROFILE%\Anaconda3`:
 
 ```json
 {
-    "commandline" : "cmd.exe /K %USERPROFILE%\\Anaconda3\\Scripts\\activate.bat %USERPROFILE%\\Anaconda3",
+    "commandline" : "cmd.exe /k \"%USERPROFILE%\\Anaconda3\\Scripts\\activate.bat %USERPROFILE%\\Anaconda3\"",
     "icon" : "%USERPROFILE%/Anaconda3/Menu/anaconda-navigator.ico",
     "name" : "Anaconda3",
     "startingDirectory" : "%USERPROFILE%"
@@ -28,8 +28,9 @@ Assuming that you've installed cmder into `%CMDER_ROOT%`:
 
 ```json
 {
-    "commandline" : "cmd.exe /k %CMDER_ROOT%\\vendor\\init.bat",
+    "commandline" : "cmd.exe /k \"%CMDER_ROOT%\\vendor\\init.bat\"",
     "name" : "cmder",
+    "icon" : "%CMDER_ROOT%/icons/cmder.ico",
     "startingDirectory" : "%USERPROFILE%"
 }
 ```
@@ -77,4 +78,17 @@ Assuming that you've installed Git Bash into `C:/Program Files/Git`:
 }
 ````
 
+## MSYS2
+
+Assuming that you've installed MSYS2 into `C:/msys64`:
+
+```json
+{
+    "name" : "MSYS2",
+    "commandline" : "C:/msys64/msys2_shell.cmd -defterm -no-start -mingw64",
+    "icon": "C:/msys64/msys2.ico",
+    "startingDirectory" : "C:/msys64/home/user"
+}
+````
+
 <!-- Adding a tool here? Make sure to add it in alphabetical order! -->

doc/user-docs/UsingCommandlineArguments.md

@@ -22,6 +22,7 @@ pass, and gives some examples of how to use the `wt` commandline.
 ### Options
 
 #### `--help,-h,-?,/?,`
+
 Display the help message.
 
 ## Subcommands
@@ -35,21 +36,18 @@ opens a new window. Subsequent `new-tab` commands will all open new tabs in the
 same window.
 
 **Parameters**:
-* `[terminal_parameters]`: See [[terminal_parameters]](#terminal_parameters).
 
+* `[terminal_parameters]`: See [[terminal_parameters]](#terminal_parameters).
 
 #### `split-pane`
 
-`split-pane [--target,-t target-pane] [-H]|[-V] [terminal_parameters]`
+`split-pane [-H]|[-V] [terminal_parameters]`
 
 Creates a new pane in the currently focused tab by splitting the given pane
 vertically or horizontally.
 
 **Parameters**:
-* `--target,-t target-pane`: Creates a new split in the given `target-pane`.
-  Each pane has a unique index (per-tab) which can be used to identify them.
-  These indicies are assigned in the order the panes were created. If omitted,
-  defaults to the index of the currently focused pane.
+
 * `-H`, `-V`: Used to indicate which direction to split the pane. `-V` is
   "vertically" (think `[|]`), and `-H` is "horizontally" (think `[-]`). If
   omitted, defaults to "auto", which splits the current pane in whatever the
@@ -72,7 +70,6 @@ Moves focus to a given tab.
 * `-p,--previous`: Move focus to the previous tab. Will display an error if
   combined with either of `--next` or `--target`.
 
-
 #### `[terminal_parameters]`
 
 Some of the preceding commands are used to create a new terminal instance.
@@ -92,12 +89,11 @@ following:
   selected profile. If the user wants to use a `;` in this commandline, it
   should be escaped as `\;`.
 
-
 ## Examples
 
 ### Open Windows Terminal in the current directory
 
-```
+```powershell
 wt -d .
 ```
 
@@ -114,11 +110,12 @@ the `split-pane` command to create new panes.
 
 Consider the following commandline:
 
-```
+```powershell
 wt ; split-pane -p "Windows PowerShell" ; split-pane -H wsl.exe
 ```
 
 This creates a new Windows Terminal window with one tab, and 3 panes:
+
 * `wt`: Creates the new tab with the default profile
 * `split-pane -p "Windows PowerShell"`: This will create a new pane, split from
   the parent with the default profile. This pane will open with the "Windows

doc/user-docs/UsingJsonSettings.md

@@ -46,7 +46,7 @@ Example settings include
     ...
 ```
 
-These global properties can exist either in the root json object, or in and
+These global properties can exist either in the root json object, or in an
 object under a root property `"globals"`.
 
 ## Key Bindings
@@ -54,8 +54,8 @@ object under a root property `"globals"`.
 This is an array of key chords and shortcuts to invoke various commands.
 Each command can have more than one key binding.
 
-NOTE: Key bindings is a subfield of the global settings and
-key bindings apply to all profiles in the same manner.
+> 👉 **Note**: Key bindings is a subfield of the global settings and
+> key bindings apply to all profiles in the same manner.
 
 For example, here's a sample of the default keybindings:
 
@@ -69,9 +69,26 @@ For example, here's a sample of the default keybindings:
         // etc.
     ]
 }
-
 ```
 
+You can also use a single key chord string as the value of `"keys"`.
+It will be treated as a chord of length one.
+This will allow you to simplify the above snippet as follows:
+
+```json
+{
+    "keybindings":
+    [
+        { "command": "closePane", "keys": "ctrl+shift+w" },
+        { "command": "copy", "keys": "ctrl+shift+c" },
+        { "command": "newTab", "keys": "ctrl+shift+t" },
+        // etc.
+    ]
+}
+```
+
+
+
 ### Unbinding keys
 
 If you ever come across a key binding that you're unhappy with, it's possible to
@@ -104,7 +121,7 @@ profile is identified by a GUID and contains a number of other fields.
 * Which color scheme to use (see Schemes below)
 * Font face and size
 * Various settings to control appearance. E.g. Opacity, icon, cursor appearance, display name etc.
-* Other behavioural settings. E.g. Close on exit, snap on input, .....
+* Other behavioral settings. E.g. Close on exit, snap on input, .....
 
 Example settings include
 
@@ -136,7 +153,7 @@ the property `"hidden": true` to the profile's json. This can also be used to
 remove the default `cmd` and PowerShell profiles, if the user does not wish to
 see them.
 
-##  Color Schemes
+## Color Schemes
 
 Each scheme defines the color values to be used for various terminal escape sequences.
 Each schema is identified by the name field. Examples include
@@ -159,6 +176,7 @@ The schema name can then be referenced in one or more profiles.
 ## Settings layering
 
 The runtime settings are actually constructed from _three_ sources:
+
 * The default settings, which are hardcoded into the application, and available
   in `defaults.json`. This includes the default keybindings, color schemes, and
   profiles for both Windows PowerShell and Command Prompt (`cmd.exe`).
@@ -190,7 +208,7 @@ scheme in `profiles.json` with the same name as a default color scheme.
 
 If you'd like to unbind a keystroke that's bound to an action in the default
 keybindings, you can set the `"command"` to `"unbound"` or `null`. This will
-allow the keystroke to fallthough to the commandline application instead of
+allow the keystroke to fallthrough to the commandline application instead of
 performing the default action.
 
 ### Dynamic Profiles
@@ -269,7 +287,7 @@ properties for all your profiles, like so:
             {
                 "guid": "{61c54bbd-c2c6-5271-96e7-009a87ff44bf}",
                 "name": "Windows PowerShell",
-                "commandline": "powershell.exe",
+                "commandline": "powershell.exe"
             },
             {
                 "guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
@@ -281,12 +299,13 @@ properties for all your profiles, like so:
                 "name" : "cmder",
                 "startingDirectory" : "%USERPROFILE%"
             }
-        ],
-    }
+        ]
+    },
 ```
 
 Note that the `profiles` property has changed in this example from a _list_ of
 profiles, to an _object_ with two properties:
+
 * a `list` that contains the list of all the profiles
 * the new `defaults` object, which contains all the settings that should apply to
   every profile.
@@ -309,7 +328,7 @@ could achieve that with the following:
             {
                 "guid": "{61c54bbd-c2c6-5271-96e7-009a87ff44bf}",
                 "name": "Windows PowerShell",
-                "commandline": "powershell.exe",
+                "commandline": "powershell.exe"
             },
             {
                 "guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
@@ -322,19 +341,18 @@ could achieve that with the following:
                 "name" : "cmder",
                 "startingDirectory" : "%USERPROFILE%"
             }
-        ],
-    }
+        ]
+    },
 ```
 
 In the above settings, the `"fontFace"` in the `cmd.exe` profile overrides the
 `"fontFace"` from the `defaults`.
 
-
-## Configuration Examples:
+## Configuration Examples
 
 ### Add a custom background to the WSL Debian terminal profile
 
-1. Download the Debian JPG logo https://www.debian.org/logos/openlogo-100.jpg
+1. Download the [Debian JPG logo](https://www.debian.org/logos/openlogo-100.jpg)
 2. Put the image in the
  `$env:LocalAppData\Packages\Microsoft.WindowsTerminal_<randomString>\LocalState\`
  directory (same directory as your `profiles.json` file).
@@ -342,17 +360,20 @@ In the above settings, the `"fontFace"` in the `cmd.exe` profile overrides the
     __NOTE__:  You can put the image anywhere you like, the above suggestion happens to be convenient.
 3. Open your WT json properties file.
 4. Under the Debian Linux profile, add the following fields:
+
 ```json
     "backgroundImage": "ms-appdata:///Local/openlogo-100.jpg",
     "backgroundImageOpacity": 1,
     "backgroundImageStretchMode" : "none",
     "backgroundImageAlignment" : "topRight",
 ```
+
 5. Make sure that `useAcrylic` is `false`.
 6. Save the file.
 7. Jump over to WT and verify your changes.
 
 Notes:
+
 1. You will need to experiment with different color settings
 and schemes to make your terminal text visible on top of your image
 2. If you store the image in the UWP directory (the same directory as your profiles.json file),
@@ -414,7 +435,6 @@ no text selection. Additionally, if you set `paste` to `"ctrl+v"`, commandline
 applications won't be able to read a ctrl+v from the input. For these reasons,
 we suggest `"ctrl+shift+c"` and `"ctrl+shift+v"`
 
-
 ### Setting the `startingDirectory` of WSL Profiles to `~`
 
 By default, the `startingDirectory` of a profile is `%USERPROFILE%`

doc/user-docs/index.md

@@ -75,15 +75,16 @@ To open the settings file from Windows Terminal:
 
 For an introduction to the various settings, see [Using Json Settings](UsingJsonSettings.md). The list of valid settings can be found in the [profiles.json documentation](../cascadia/SettingsSchema.md) section.
 
-## Tips and Tricks:
+## Tips and Tricks
 
 1. In PowerShell you can discover if the Windows Terminal is being used by checking for the existence of the environment variable `WT_SESSION`.
 
     Under pwsh you can also use
 `(Get-Process -Id $pid).Parent.ProcessName -eq 'WindowsTerminal'`
 
-    (ref https://twitter.com/r_keith_hill/status/1142871145852440576)
+    (ref [https://twitter.com/r_keith_hill/status/1142871145852440576](https://twitter.com/r_keith_hill/status/1142871145852440576))
 
 2. Terminal zoom can be changed by holding <kbd>Ctrl</kbd> and scrolling with mouse.
-3. If `useAcrylic` is enabled in profiles.json, background opacity can be changed by holding <kbd>Ctrl</kbd>+<kbd>Shift</kbd> and scrolling with mouse.
-4. Please add more Tips and Tricks
+3. Background opacity can be changed by holding <kbd>Ctrl</kbd>+<kbd>Shift</kbd> and scrolling with mouse. Note that acrylic transparency is limited by the OS only to focused windows.
+4. Open Windows Terminal in current directory by typing `wt -d .` in the address bar.
+5. Please add more Tips and Tricks.

doc/virtual-dtors.md

@@ -25,7 +25,7 @@ You may ask yourself, why is the destructor deleted, then later defined to the
   this, then sometimes on object destruction, the interface's dtor will be
   called instead of the destructor for the base class. There is other
   strangeness that can occur as well, the details of which escape my memory from
-  when @austdi and I first investigaved this early 2018.
+  when @austdi and I first investigated this early 2018.
 
 The end result of not defining your interfaces exactly like this will be that
   occasionally, when destructing objects, you'll get a segfault.