bak

A continuation of #19645. Maintainer modifications were disabled,
unfortunately.

.config/dotnet-tools.json

@@ -3,7 +3,7 @@
   "isRoot": true,
   "tools": {
     "XamlStyler.Console": {
-      "version": "3.2311.2",
+      "version": "3.2501.8",
       "commands": [
         "xstyler"
       ]

.github/actions/spelling/allow/allow.txt

@@ -1,5 +1,6 @@
 aci
 allcolors
+bak
 breadcrumb
 breadcrumbs
 ccmp

.github/actions/spelling/allow/apis.txt

@@ -174,9 +174,11 @@ tokeninfo
 tolower
 toupper
 TRACKMOUSEEVENT
+ubrk
 UChar
 UFIELD
 ULARGE
+UNCEx
 UOI
 UPDATEINIFILE
 urlmon

.github/actions/spelling/allow/microsoft.txt

@@ -34,6 +34,7 @@ issecret
 libucrt
 libucrtd
 LOCKFILE
+LTCG
 Lxss
 makepri
 microsoft

.github/actions/spelling/allow/names.txt

@@ -28,6 +28,7 @@ jerrysh
 Kaiyu
 leonardder
 lhecker
+Lovecraft
 masserano
 menger
 migrie

.github/actions/spelling/expect/74d92373e136649071b3c04dc8773f18deaf5e04.txt

@@ -0,0 +1 @@
+ftcs

.github/actions/spelling/expect/expect.txt

@@ -115,7 +115,6 @@ BKCOLOR
 BKGND
 BKMK
 Bksp
-blds
 Blt
 blu
 BLUESCROLL
@@ -181,7 +180,6 @@ CLIPCHILDREN
 CLIPSIBLINGS
 closetest
 cloudconsole
-CLOUDT
 cloudvault
 CLSCTX
 clsids
@@ -497,6 +495,7 @@ DSBUFFERDESC
 DSBVOLUME
 dsm
 dsound
+DSRCPR
 DSSCL
 DSwap
 DTo
@@ -542,7 +541,6 @@ EPres
 EQU
 ERASEBKGND
 ERRORONEXIT
-ESFCIB
 esrp
 ESV
 ETW
@@ -605,7 +603,6 @@ FONTSTRING
 FONTTYPE
 FONTWIDTH
 FONTWINDOW
-foob
 FORCEOFFFEEDBACK
 FORCEONFEEDBACK
 FRAMECHANGED
@@ -622,7 +619,6 @@ FUNCTIONCALL
 fuzzmain
 fuzzmap
 fuzzwrapper
-fuzzyfinder
 fwdecl
 fwe
 fwlink
@@ -809,6 +805,7 @@ IMPEXP
 inbox
 inclusivity
 INCONTEXT
+INDEXID
 INFOEX
 inheritcursor
 INITCOMMONCONTROLSEX
@@ -824,6 +821,7 @@ INPUTSCOPE
 INSERTMODE
 INTERACTIVITYBASE
 INTERCEPTCOPYPASTE
+internalevent
 INTERNALNAME
 intsafe
 INVALIDARG
@@ -909,6 +907,7 @@ LNM
 LOADONCALL
 LOBYTE
 localappdata
+LOCATIONCHANGE
 locsrc
 Loewen
 LOGBRUSH
@@ -960,8 +959,8 @@ lsb
 lsconfig
 lstatus
 lstrcmp
-lstrcmpi
 LTEXT
+lto
 ltsc
 LUID
 luma
@@ -1033,6 +1032,7 @@ MOUSEACTIVATE
 MOUSEFIRST
 MOUSEHWHEEL
 MOVESTART
+msaa
 msb
 msbuildcache
 msctls
@@ -1091,6 +1091,8 @@ NEXTLINE
 nfe
 NLSMODE
 NOACTIVATE
+NOACTIVATEKEYBOARDLAYOUT
+NOACTIVATETIP
 NOAPPLYNOW
 NOCLIP
 NOCOMM
@@ -1122,7 +1124,6 @@ NOREPOSITION
 NORMALDISPLAY
 NOSCRATCH
 NOSEARCH
-noselect
 NOSELECTION
 NOSENDCHANGING
 NOSIZE
@@ -1140,6 +1141,7 @@ NOYIELD
 NOZORDER
 NPFS
 nrcs
+NRNW
 NSTATUS
 ntapi
 ntdef
@@ -1180,7 +1182,6 @@ onecoreuuid
 ONECOREWINDOWS
 onehalf
 oneseq
-oob
 openbash
 opencode
 opencon
@@ -1505,7 +1506,6 @@ scrolllock
 scrolloffset
 SCROLLSCALE
 SCROLLSCREENBUFFER
-scursor
 sddl
 SDKDDK
 segfault
@@ -1585,6 +1585,7 @@ SLGP
 SLIST
 slmult
 sln
+slnx
 slpit
 SManifest
 SMARTQUOTE
@@ -1703,13 +1704,16 @@ TEXTMETRIC
 TEXTMETRICW
 textmode
 texttests
+TFCAT
 THUMBPOSITION
 THUMBTRACK
 tilunittests
+TIPCAP
 titlebars
 TITLEISLINKNAME
 TLDP
 TLEN
+Tlgg
 TMAE
 TMPF
 tmultiple
@@ -1756,10 +1760,13 @@ UIACCESS
 uiacore
 uiautomationcore
 uielem
+UIELEMENTENABLED
+UIELEMENTENABLEDONLY
 UINTs
 uld
 uldash
 uldb
+ULONGLONG
 ulwave
 Unadvise
 unattend
@@ -1971,6 +1978,7 @@ WRITECONSOLEINPUT
 WRITECONSOLEOUTPUT
 WRITECONSOLEOUTPUTSTRING
 wrkstr
+wrl
 WRL
 wrp
 WRunoff

.vsconfig

@@ -17,7 +17,6 @@
     "Microsoft.VisualStudio.Component.AppInsights.Tools",
     "Microsoft.Net.Component.4.8.TargetingPack",
     "Microsoft.VisualStudio.Component.DiagnosticTools",
-    "Microsoft.NetCore.Component.Runtime.6.0",
     "Microsoft.VisualStudio.Component.ClassDesigner",
     "Microsoft.VisualStudio.Component.GraphDocument",
     "Microsoft.VisualStudio.Component.CodeMap",

Directory.Build.props

@@ -33,17 +33,6 @@
       A:\;
       E:\;
       $(windir)\**;
-      $(MSBuildBinPath)\**;
-      $(MSBuildToolsPath32)\**;
-    </MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns>
-
-    <!--
-      Unit tests may write to TEMP, but should not be considered outputs. However, $(Temp) is using the DOS path (C:\Users\CLOUDT~1\AppData\Local\Temp), which
-      isn't accounted for in these globs. So we're building up to TEMP using $(LOCALAPPDATA) instead.
-    -->
-    <MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns>
-      $(MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns);
-      $(LOCALAPPDATA)\Temp\**;
     </MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns>
 
     <!-- 
@@ -57,15 +46,6 @@
     -->
     <MSBuildCacheIdenticalDuplicateOutputPatterns>$(MSBuildCacheIdenticalDuplicateOutputPatterns);obj\*\vcpkg\**</MSBuildCacheIdenticalDuplicateOutputPatterns>
 
-    <!--
-      Ensure the MSBuildCache ignores collecting outputs under vcpkg's build tree, which is a working directory used to build vcpkg packages and not intended to be consumed by anything else in the build.
-      Note: We cannot use $(VcpkgInstalledDir) directly since it differs between projects, so use a pattern which encompasses all possibilities.
-    -->
-    <MSBuildCacheIgnoredOutputPatterns>
-      $(MSBuildCacheIgnoredOutputPatterns);
-      $(SolutionDir)\obj\*\vcpkg*\vcpkg\blds\**;
-    </MSBuildCacheIgnoredOutputPatterns>
-
     <!-- version of MSBuildCache is not part of the cache key -->
     <PackagesConfigFile>$(MSBuildThisFileDirectory)\dep\nuget\packages.config</PackagesConfigFile>
     <MSBuildCacheIgnoredInputPatterns>$(MSBuildCacheIgnoredInputPatterns);$(PackagesConfigFile)</MSBuildCacheIgnoredInputPatterns>

NuGet.Config

@@ -4,7 +4,7 @@
         <clear />
         <!-- Dependencies that we can turn on to force override for testing purposes before uploading. -->
         <!--<add key="Static Package Dependencies" value="dep\packages" />-->
-        <add key="TerminalDependencies" value="https://pkgs.dev.azure.com/shine-oss/terminal/_packaging/TerminalDependencies/nuget/v3/index.json" />
+        <add key="TerminalDependencies" value="https://pkgs.dev.azure.com/shine-oss/terminal/_packaging/TerminalDependencies%40Local/nuget/v3/index.json" />
     </packageSources>
     <disabledPackageSources>
         <clear />

README.md

@@ -169,10 +169,10 @@ The Portable ZIP distribution is a portable application. It will not automatical
 
 | Distribution  | Architecture    | Link                                                 |
 |---------------|:---------------:|------------------------------------------------------|
-| App Installer | x64, arm64, x86 | [download](https://aka.ms/terminal-canary-installer) |
-| Portable ZIP  | x64             | [download](https://aka.ms/terminal-canary-zip-x64)   |
-| Portable ZIP  | ARM64           | [download](https://aka.ms/terminal-canary-zip-arm64) |
-| Portable ZIP  | x86             | [download](https://aka.ms/terminal-canary-zip-x86)   |
+| App Installer | x64, arm64, x86 | [Download](https://aka.ms/terminal-canary-installer) |
+| Portable ZIP  | x64             | [Download](https://aka.ms/terminal-canary-zip-x64)   |
+| Portable ZIP  | ARM64           | [Download](https://aka.ms/terminal-canary-zip-arm64) |
+| Portable ZIP  | x86             | [Download](https://aka.ms/terminal-canary-zip-x86)   |
 
 _Learn more about the [types of Windows Terminal distributions](https://learn.microsoft.com/windows/terminal/distributions)._
 
@@ -375,7 +375,7 @@ winget configure .config\configuration.winget
 
 ## Building the Code
 
-OpenConsole.sln may be built from within Visual Studio or from the command-line
+OpenConsole.slnx may be built from within Visual Studio or from the command-line
 using a set of convenience scripts & tools in the **/tools** directory:
 
 ### Building in PowerShell

build/StoreSubmission/Preview/PDPs/de-DE/PDP.xml

@@ -56,11 +56,11 @@ Dies ist ein Open Source-Projekt, und wir freuen uns über die Teilnahme der Com
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-- Wir haben der Benutzeroberfläche durchschnittliche Einstellungen hinzugefügt, die nur einmal in der JSON-Datei vorhanden waren, einschließlich einer neuen Seite zum Anpassen des Layouts Ihres Menüs "Neue Registerkarte"!
-- Wir haben die Fensterverwaltung zurückgesetzt, um die Zuverlässigkeit zu verbessern; Melden Sie alle Fehler, die mit dem alias "wt.exe" auftreten.
-- Profile zeigen jetzt ein Symbol an, wenn sie ausgeblendet wurden oder auf programme verweisen, die deinstalliert wurden.
+– Eine komplett neue Erweiterungsseite, die anzeigt, was in Ihrem Terminal installiert ist
+– Die Befehlspalette wird jetzt sowohl in Ihrer Muttersprache als auch auf Englisch angezeigt
+– Neue VT-Features wie synchronisiertes Rendering, neue Farbschemas, Konfiguration für schnelle Mausaktionen wie Zoomen und mehr
 
-Weitere Details finden Sie auf unserer GitHub-Releasesseite.
+Weitere Informationen finden Sie auf unserer GitHub-Releaseseite.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/en-US/PDP.xml

@@ -56,9 +56,9 @@ This is an open source project and we welcome community participation. To partic
   <ReleaseNotes _locID="App_ReleaseNotes">
     <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__}{Locked=wt.exe} App Release Note" -->Version __VERSION_NUMBER__
 
-- We've added dozens of settings to the UI that once only existed in the JSON file, including a new page for customizing the layout of your New Tab menu!
-- We have rearchitected window management to improve reliability; please file any bugs you encounter with the wt.exe alias
-- Profiles now show an icon if they've been hidden or refer to programs which were uninstalled.
+- A whole new Extensions page that shows what has been installed into your Terminal
+- Command Palette now shows up in your native language as well as English
+- New VT features such as synchronized rendering, new color schemes, configuration for quick mouse actions like zooming, and more
 
 Please see our GitHub releases page for additional details.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/es-ES/PDP.xml

@@ -56,11 +56,11 @@ Este es un proyecto de fuente abierta y animamos a la comunidad a participar. Pa
   <ReleaseNotes>
     Versión __VERSION_NUMBER__
 
-- Hemos agregado decenas de configuraciones a la interfaz de usuario que solo existían una vez en el archivo JSON, incluida una página nueva para personalizar el diseño del menú Nueva pestaña.
-- Tenemos administración de ventanas rearchitecdas para mejorar la confiabilidad; envíe los errores que encuentre con el alias de wt.exe.
-- Ahora, los perfiles muestran un icono si se han ocultado o hacen referencia a programas que se han desinstalado.
+- Página Extensiones completamente nueva que muestra lo que se ha instalado en tu terminal
+- La paleta de comandos ahora se muestra en tu idioma nativo, así como en inglés
+- Nuevas características de VT, como la representación sincronizada, nuevos esquemas de color, configuración para acciones rápidas del ratón, como el zoom, y más
 
-Consulte nuestra página de versiones de GitHub para obtener más detalles.
+Consulta la página de versiones de GitHub para más información.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/fr-FR/PDP.xml

@@ -54,13 +54,13 @@ Il s’agit d’un projet open source et nous vous invitons à participer dans l
     
   </DevStudio>
   <ReleaseNotes>
-    __VERSION_NUMBER__ de version
+    Version __VERSION_NUMBER__
 
-- Nous avons ajouté des milliers de paramètres à l’interface utilisateur qui n’existaient auparavant que dans le fichier JSON, y compris une nouvelle page pour personnaliser la disposition de votre menu Nouvel onglet !
-- Nous avons réarchitialiser la gestion des fenêtres pour améliorer la fiabilité ; entrez les bogues rencontrés avec l’alias wt.exe
-- Les profils affichent désormais une icône s’ils ont été masqués ou s’ils font référence à des programmes qui ont été désinstallés.
+- Une toute nouvelle page Extensions qui montre ce qui a été installé dans votre terminal
+- La palette de commandes s’affiche désormais dans votre langue native, ainsi qu’en anglais
+- Nouvelles fonctionnalités VT telles que le rendu synchronisé, de nouveaux schémas de couleurs, la configuration pour des actions rapides de la souris comme le zoom, et plus encore
 
-Pour plus d’informations, consultez notre page des mises en production GitHub.
+Veuillez consulter notre page des versions GitHub pour découvrir d’autres détails.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/it-IT/PDP.xml

@@ -54,13 +54,13 @@ Si tratta di un progetto open source e la partecipazione della community è molt
     
   </DevStudio>
   <ReleaseNotes>
-    Versione __VERSION_NUMBER__
+    Versione __VERSION_NUMBER__ 
 
-- Sono state aggiunte decine di impostazioni all'interfaccia utente che una volta esisteva solo nel file JSON, inclusa una nuova pagina per personalizzare il layout del menu Nuova scheda.
-- È stata riattivata la gestione delle finestre per migliorare l'affidabilità; inserire eventuali bug riscontrati con l'alias wt.exe
-- I profili ora mostrano un'icona se sono stati nascosti o fanno riferimento ai programmi che sono stati disinstallati.
+- Una pagina Estensioni completamente nuova che mostra ciò che è stato installato nel terminale
+- Il riquadro comandi ora viene visualizzato nella tua lingua di origine oltre che in inglese
+- Nuove funzionalità VT come il rendering sincronizzato, le nuove combinazioni di colori, la configurazione per azioni rapide del mouse come lo zoom e altro ancora
 
-Per altri dettagli, vedere la pagina delle versioni di GitHub.
+Per altri dettagli, vedi la pagina delle release di GitHub.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ja-JP/PDP.xml

@@ -56,11 +56,11 @@
   <ReleaseNotes>
     バージョン __VERSION_NUMBER__
 
-- [新しいタブ] メニューのレイアウトをカスタマイズするための新しいページを含む、一度だけ JSON ファイルに存在した UI に多数の設定を追加しました。
-- 信頼性を向上させるためにウィンドウ管理を再選択しました。wt.exe エイリアスで発生したバグを報告してください
-- プロファイルが非表示になっているか、アンインストールされたプログラムを参照している場合にアイコンが表示されるようになりました。
+- ターミナルに何がインストールされているかを表示する新しい [拡張機能] ページ
+- コマンド パレットがネイティブ言語と英語で表示されるようになりました
+- 同期レンダリング、新しい配色、ズームなどのクイック マウス操作の構成などの、新しい VT 機能
 
-詳細については、GitHub リリース ページを参照してください。
+詳細については、GitHub リリース ページをご覧ください。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ko-KR/PDP.xml

@@ -56,9 +56,9 @@
   <ReleaseNotes>
     버전 __VERSION_NUMBER__
 
-- 새 탭 메뉴의 레이아웃을 사용자 지정하기 위한 새 페이지를 포함하여 JSON 파일에 한 번만 존재했던 UI에 수천 개의 설정을 추가했습니다.
-- 안정성을 개선하기 위해 창 관리를 다시 보관했습니다. wt.exe 별칭에 발생한 버그를 제출하세요.
-- 프로필이 숨겨졌거나 제거된 프로그램을 참조하는 경우 이제 프로필에 아이콘이 표시됩니다.
+- 터미널에 설치된 항목을 보여 주는 완전히 새로운 확장 페이지
+- 명령 팔레트가 이제 영어뿐만 아니라 모국어로도 표시
+- 동기화된 렌더링, 새로운 색 구성표, 확대/축소와 같은 빠른 마우스 동작을 위한 구성 등 새로운 VT 기능이 추가
 
 자세한 내용은 GitHub 릴리스 페이지를 참조하세요.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/pt-BR/PDP.xml

@@ -54,13 +54,13 @@ Este é um projeto de código aberto e a participação da comunidade é bem-vin
     
   </DevStudio>
   <ReleaseNotes>
-    Versão __VERSION_NUMBER__
+    Version __VERSION_NUMBER__
 
-- Adicionamos várias configurações à interface do usuário que só existiam no arquivo JSON, incluindo uma nova página para personalizar o layout do menu Nova Guia!
-- Temos o gerenciamento de janelas rearmado para melhorar a confiabilidade; registre todos os bugs encontrados com o wt.exe alias
-- Os perfis agora mostram um ícone se eles foram ocultos ou se referem a programas que foram desinstalados.
+– Uma nova página de Extensões que mostra o que foi instalado no seu Terminal
+– A Paleta de Comandos agora aparece no seu idioma nativo, além do inglês
+– Novos recursos da VT, como renderização sincronizada, novos esquemas de cores, configuração para ações rápidas do mouse, como zoom, e muito mais
 
-Consulte nossa página de versões do GitHub para obter detalhes adicionais.
+Confira nossa página de lançamentos no GitHub para obter mais detalhes.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-ploc/PDP.xml

@@ -56,11 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
+- Ą ωћόĺé ņέш ∑×τзńşĩōиŝ ρâģε τђат šнòωş ωħąт нǻś ъеēñ įηšтǻľĺéδ ĭʼnтο ўбμŗ Ţзřmĭňāŀ !!! !!! !!! !!! !!! !!! !!! !!! 
+- €όммаήδ Рдĺēтţĕ пŏẅ şĥŏшś üρ ϊñ ỳоũѓ йαťïνє ļäŋģµаġέ άś ŵєŀľ åś Σиĝℓĭŝђ !!! !!! !!! !!! !!! !!! !!! 
+- ∏еẅ VΤ ƒэåŧύґέŝ şűçн ăŝ ѕỳňсĥŗǿйìźėð гēŋďзříⁿğ, ηĕш ćôĺõг şĉћěмєѕ, çóńƒіĝџŗáτїöπ ƒοг qũī¢ķ möűšë ąćŧϊόņŝ ľîķє žøōmίйğ, ǻⁿđ мόřε !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
 
-Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
+Ρĺęąŝэ ѕєě õμя ĞĭтΗύв řєĺэдšέŝ рάġě ƒοґ àďđϊтїõлаℓ ðêţǻїłş. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-ploca/PDP.xml

@@ -56,11 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
+- Ą ωћόĺé ņέш ∑×τзńşĩōиŝ ρâģε τђат šнòωş ωħąт нǻś ъеēñ įηšтǻľĺéδ ĭʼnтο ўбμŗ Ţзřmĭňāŀ !!! !!! !!! !!! !!! !!! !!! !!! 
+- €όммаήδ Рдĺēтţĕ пŏẅ şĥŏшś üρ ϊñ ỳоũѓ йαťïνє ļäŋģµаġέ άś ŵєŀľ åś Σиĝℓĭŝђ !!! !!! !!! !!! !!! !!! !!! 
+- ∏еẅ VΤ ƒэåŧύґέŝ şűçн ăŝ ѕỳňсĥŗǿйìźėð гēŋďзříⁿğ, ηĕш ćôĺõг şĉћěмєѕ, çóńƒіĝџŗáτїöπ ƒοг qũī¢ķ möűšë ąćŧϊόņŝ ľîķє žøōmίйğ, ǻⁿđ мόřε !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
 
-Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
+Ρĺęąŝэ ѕєě õμя ĞĭтΗύв řєĺэдšέŝ рάġě ƒοґ àďđϊтїõлаℓ ðêţǻїłş. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-plocm/PDP.xml

@@ -56,11 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
+- Ą ωћόĺé ņέш ∑×τзńşĩōиŝ ρâģε τђат šнòωş ωħąт нǻś ъеēñ įηšтǻľĺéδ ĭʼnтο ўбμŗ Ţзřmĭňāŀ !!! !!! !!! !!! !!! !!! !!! !!! 
+- €όммаήδ Рдĺēтţĕ пŏẅ şĥŏшś üρ ϊñ ỳоũѓ йαťïνє ļäŋģµаġέ άś ŵєŀľ åś Σиĝℓĭŝђ !!! !!! !!! !!! !!! !!! !!! 
+- ∏еẅ VΤ ƒэåŧύґέŝ şűçн ăŝ ѕỳňсĥŗǿйìźėð гēŋďзříⁿğ, ηĕш ćôĺõг şĉћěмєѕ, çóńƒіĝџŗáτїöπ ƒοг qũī¢ķ möűšë ąćŧϊόņŝ ľîķє žøōmίйğ, ǻⁿđ мόřε !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
 
-Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
+Ρĺęąŝэ ѕєě õμя ĞĭтΗύв řєĺэдšέŝ рάġě ƒοґ àďđϊтїõлаℓ ðêţǻїłş. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ru-RU/PDP.xml

@@ -56,9 +56,9 @@
   <ReleaseNotes>
     Версия __VERSION_NUMBER__
 
-- Мы добавили в пользовательский интерфейс десятки параметров, которые существовали только в JSON-файле, включая новую страницу для настройки макета меню "Новая вкладка".
-- Для повышения надежности мы переупоряхлили управление окнами; создайте все ошибки, обнаруженные с wt.exe псевдонимом
-- Профили теперь показывают значок, если они скрыты или ссылаются на программы, которые были удалены.
+– Новая страница расширений, на которой отображается информация о том, что было установлено в вашем терминале
+– Палитра команд теперь доступна на вашем языке, а также на английском
+– Новые функции VT, например синхронизированная отрисовка, новые цветовые схемы, настройка быстрых действий мыши, таких как масштабирование, и т. д.
 
 Дополнительные сведения см. на странице выпусков GitHub.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/uk-UA/PDP.xml

@@ -0,0 +1,181 @@
+<?xml version="1.0" encoding="utf-8"?>
+<ProductDescription language="en-us" xmlns="http://schemas.microsoft.com/appx/2012/ProductDescription" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xml:lang="en-us" Release="">
+  <AppStoreName _locID="App_AppStoreName">
+    <!-- This is optional.  AppStoreName is typically extracted from your package's AppxManifest DisplayName property. -->
+    <!-- Uncomment (and localize) this Store name if your application package does not contain a localization for the DisplayName in this language. -->
+    <!-- Leaving this uncommented for a language that your application package DOES contain a DisplayName for will result in a submission failure with the API. -->
+    <!-- _locComment_text="{MaxLength=200} App AppStoreName" -->
+    <!-- Windows Terminal -->
+  </AppStoreName>
+  <Keywords>
+    <!-- Valid length: 30 character limit, up to 7 elements -->
+    <Keyword _locID="App_keyword1">
+      <!-- _locComment_text="{MaxLength=30} App keyword 1" -->Термінал</Keyword>
+    <Keyword _locID="App_keyword2">
+      <!-- _locComment_text="{MaxLength=30} App keyword 2" -->Консоль</Keyword>
+    <Keyword _locID="App_keyword3">
+      <!-- _locComment_text="{MaxLength=30} App keyword 3" -->
+    </Keyword>
+    <Keyword _locID="App_keyword4">
+      <!-- _locComment_text="{MaxLength=30} App keyword 4" -->
+    </Keyword>
+    <Keyword _locID="App_keyword5">
+      <!-- _locComment_text="{MaxLength=30} App keyword 5" -->
+    </Keyword>
+    <Keyword _locID="App_keyword6">
+      <!-- _locComment_text="{MaxLength=30} App keyword 6" -->
+    </Keyword>
+    <Keyword _locID="App_keyword7">
+      <!-- _locComment_text="{MaxLength=30} App keyword 7" -->
+    </Keyword>
+  </Keywords>
+  <Description _locID="App_Description">
+    <!-- _locComment_text="{MaxLength=10000} App Description" -->Це попередня збірка терміналу Windows, яка містить найновіші функції в міру їх розробки. Термінал Windows - це сучасний, швидкий, ефективний, потужний та продуктивний термінальний застосунок для користувачів інструментів командного рядка та оболонок, таких як командний рядок, PowerShell та WSL. Його основні функції включають кілька вкладок, панелей, підтримку символів Unicode та UTF-8, механізм візуалізації тексту з прискоренням GPU, а також користувацькі теми, стилі та конфігурації.
+
+Це проєкт з відкритим кодом, і ми вітаємо участь спільноти. Щоб взяти участь, будь ласка, відвідайте https://github.com/microsoft/terminal </Description>
+  <ShortDescription _locID="App_ShortDescription">
+    <!-- Only used for games. This description appears in the Information section of the Game Hub on Xbox One, and helps customers understand more about your game. -->
+    <!-- _locComment_text="{MaxLength=500} App ShortDescription" -->
+  </ShortDescription>
+  <ShortTitle _locID="App_ShortTitle">
+    <!-- A shorter version of your product's name. If provided, this shorter name may appear in various places on Xbox One (during installation, in Achievements, etc.) in place of the full title of your product. -->
+    <!-- _locComment_text="{MaxLength=50} App ShortTitle" -->
+  </ShortTitle>
+  <SortTitle _locID="App_SortTitle">
+    <!-- If your product could be alphabetized in different ways, you can enter another version here. This may help customers find the product more quickly when searching. -->
+    <!-- _locComment_text="{MaxLength=255} App SortTitle" -->
+  </SortTitle>
+  <VoiceTitle _locID="App_VoiceTitle">
+    <!-- An alternate name for your product that, if provided, may be used in the audio experience on Xbox One when using Kinect or a headset. -->
+    <!-- _locComment_text="{MaxLength=255} App VoiceTitle" -->
+  </VoiceTitle>
+  <DevStudio _locID="App_DevStudio">
+    <!-- Specify this value if you want to include a "Developed by" field in the listing. (The "Published by" field will list the publisher display name associated with your account, whether or not you provide a devStudio value.) -->
+    <!-- _locComment_text="{MaxLength=255} App DevStudio" -->
+  </DevStudio>
+  <ReleaseNotes _locID="App_ReleaseNotes">
+    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__}{Locked=wt.exe} App Release Note" -->Версія __VERSION_NUMBER__
+
+- Цілком нова сторінка розширень, яка показує, що було встановлено у вашому терміналі
+- Палітра команд тепер відображається вашою рідною мовою, а також англійською
+- Нові функції віртуального автомата, такі як синхронізований рендеринг, нові колірні схеми, налаштування для швидких дій миші, таких як масштабування, тощо
+
+Будь ласка, перегляньте нашу сторінку релізів GitHub для отримання додаткової інформації.
+  </ReleaseNotes>
+  <ScreenshotCaptions>
+    <!-- Valid length: 200 character limit, up to 9 elements per platform -->
+    <!-- Valid attributes: any of DesktopImage, MobileImage, XboxImage, SurfaceHubImage, and HoloLensImage -->
+    <Caption DesktopImage="acrylic-emoji.png" _locID="App_caption1">
+      <!-- _locComment_text="{MaxLength=200} Screenshot caption 1" -->
+    </Caption>
+    <Caption DesktopImage="panes.png" _locID="App_caption2">
+      <!-- _locComment_text="{MaxLength=200} Screenshot caption 2" -->
+    </Caption>
+    <Caption DesktopImage="htop.png" _locID="App_caption3">
+      <!-- _locComment_text="{MaxLength=200} Screenshot caption 3" -->
+    </Caption>
+  </ScreenshotCaptions>
+  <AdditionalAssets>
+    <!-- Valid elements:-->
+    <!--   HeroImage414x180, HeroImage846x468, HeroImage558x756, HeroImage414x468, HeroImage558x558, HeroImage2400x1200,-->
+    <!--   ScreenshotWXGA, ScreenshotHD720, ScreenshotWVGA, Doublewide, Panoramic, Square,-->
+    <!--   SmallMobileTile, SmallXboxLiveTile, LargeMobileTile, LargeXboxLiveTile, Tile,-->
+    <!--   DesktopIcon, Icon (use this value for the 1:1 300x300 pixels logo), AchievementIcon,-->
+    <!--   ChallengePromoIcon, RewardDisplayIcon, Icon150X150, Icon71X71,-->
+    <!--   BoxArt, BrandedKeyArt, PosterArt, FeaturedPromotionalArt, PromotionalArt16x9, TitledHeroArt-->
+    <!-- There is no content for any of these elements, just a single attribute called FileName. -->
+    <PosterArt FileName="Store Poster Art.png" />
+    <BoxArt FileName="Store Box Art.png" />
+    <PromotionalArt16x9 FileName="Store Thumbnail.png" />
+  </AdditionalAssets>
+  <Trailers>
+    <!-- Maximum number of trailers permitted: 15 -->
+    <Trailer FileName="CC0605_CommandLine_Teaser_WEB_MASTER_H264_1080p_23.976_-16LKFS_-3dbTP_ST.mp4">
+      <Title _locID="App_trailerTitle1">
+        <!-- _locComment_text="{MaxLength=255} Trailer title 1" -->Новий термінал Windows</Title>
+      <Images>
+        <!-- Current maximum of 1 image per trailer permitted. -->
+        <Image FileName="Store Thumbnail.png">
+          <!-- _locComment_text="{Locked} Trailer screenshot 1 description" -->
+        </Image>
+      </Images>
+    </Trailer>
+  </Trailers>
+  <AppFeatures>
+    <!-- Valid length: 200 character limit, up to 20 elements -->
+    <AppFeature _locID="App_feature1">
+      <!-- _locComment_text="{MaxLength=200} App Feature 1" -->Наявність вкладок</AppFeature>
+    <AppFeature _locID="App_feature2">
+      <!-- _locComment_text="{MaxLength=200} App Feature 2" -->Повна підтримка Юнікоду</AppFeature>
+    <AppFeature _locID="App_feature3">
+      <!-- _locComment_text="{MaxLength=200} App Feature 3" -->Рендеринг тексту з прискоренням GPU</AppFeature>
+    <AppFeature _locID="App_feature4">
+      <!-- _locComment_text="{MaxLength=200} App Feature 4" -->Широкі можливості кастомізації</AppFeature>
+    <AppFeature _locID="App_feature5">
+      <!-- _locComment_text="{MaxLength=200} App Feature 5" -->Розділення панелей</AppFeature>
+    <AppFeature _locID="App_feature6">
+      <!-- _locComment_text="{MaxLength=200} App Feature 6" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature7">
+      <!-- _locComment_text="{MaxLength=200} App Feature 7" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature8">
+      <!-- _locComment_text="{MaxLength=200} App Feature 8" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature9">
+      <!-- _locComment_text="{MaxLength=200} App Feature 9" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature10">
+      <!-- _locComment_text="{MaxLength=200} App Feature 10" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature11">
+      <!-- _locComment_text="{MaxLength=200} App Feature 11" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature12">
+      <!-- _locComment_text="{MaxLength=200} App Feature 12" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature13">
+      <!-- _locComment_text="{MaxLength=200} App Feature 13" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature14">
+      <!-- _locComment_text="{MaxLength=200} App Feature 14" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature15">
+      <!-- _locComment_text="{MaxLength=200} App Feature 15" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature16">
+      <!-- _locComment_text="{MaxLength=200} App Feature 16" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature17">
+      <!-- _locComment_text="{MaxLength=200} App Feature 17" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature18">
+      <!-- _locComment_text="{MaxLength=200} App Feature 18" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature19">
+      <!-- _locComment_text="{MaxLength=200} App Feature 19" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature20">
+      <!-- _locComment_text="{MaxLength=200} App Feature 20" -->
+    </AppFeature>
+  </AppFeatures>
+  <RecommendedHardware>
+    <!-- Valid length: 200 character limit, up to 11 elements -->
+    <Recommendation _locID="App_RecommendedHW1">
+      <!-- _locComment_text="{MaxLength=200} App Recommended Hardware 1" -->Клавіатура</Recommendation>
+  </RecommendedHardware>
+  <MinimumHardware>
+    <!-- Valid length: 200 character limit, up to 11 elements -->
+  </MinimumHardware>
+  <CopyrightAndTrademark _locID="App_CopyrightandTrademark">
+    <!-- _locComment_text="{MaxLength=200} Copyright and Trademark" -->Права (c) Корпорація Майкрософт</CopyrightAndTrademark>
+  <AdditionalLicenseTerms _locID="App_AdditionalLicenseTerms">
+    <!-- _locComment_text="{MaxLength=10000} Additional License Terms" -->
+  </AdditionalLicenseTerms>
+  <WebsiteURL _locID="App_WebsiteURL">
+    <!-- _locComment_text="{MaxLength=2048} WebsiteURL" -->https://github.com/microsoft/terminal</WebsiteURL>
+  <SupportContactInfo _locID="App_SupportContactInfo">
+    <!-- _locComment_text="{MaxLength=2048} Support Contact Info" -->https://github.com/microsoft/terminal/issues/new</SupportContactInfo>
+  <PrivacyPolicyURL _locID="App_PrivacyURL">
+    <!-- _locComment_text="{MaxLength=2048} Privacy Policy URL" -->https://go.microsoft.com/fwlink/?LinkID=521839</PrivacyPolicyURL>
+</ProductDescription>

build/StoreSubmission/Preview/PDPs/zh-CN/PDP.xml

@@ -54,13 +54,13 @@
     
   </DevStudio>
   <ReleaseNotes>
-    版本 __VERSION_NUMBER__
+    Version __VERSION_NUMBER__
 
-- 我们向用户界面添加了许多设置，这些设置仅存在于 JSON 文件中，包括用于自定义“新建标签页”菜单布局的新页面！
-- 我们已重新检测窗口管理以提高可靠性;请将遇到的任何 bug 归档为 wt.exe 别名
-- 如果配置文件已隐藏或引用已卸载的程序，则它们现在将显示一个图标。
+- 一个全新的“扩展”页，显示已安装到终端的内容
+- 命令面板现在以你的母语和英语显示
+- 新的 VT 功能，例如同步渲染、新配色方案、快速鼠标操作(如缩放)的配置等
 
-有关其他详细信息，请参阅 GitHub 发布页面。
+有关其他详细信息，请参阅我们的 GitHub 发布页面。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/zh-TW/PDP.xml

@@ -54,13 +54,13 @@
     
   </DevStudio>
   <ReleaseNotes>
-    版本 __VERSION_NUMBER__
+    Version __VERSION_NUMBER__
 
-- 我們已新增數十個只存在於 JSON 檔案中的設定到 UI，包括自定義 [新索引標籤] 功能表版面配置的新頁面！
-- 我們已重新設定視窗管理，以改善可靠性;請提出您在 wt.exe 別名遇到的任何錯誤
-- 設定文件現在會在隱藏或參照已卸載的程式時顯示圖示。
+- 全新的延伸模組頁面會顯示已安裝在您終端機中的內容
+- 命令選擇區現在以您的母語和英文顯示
+- 新的 VT 功能，例如同步轉譯、新的色彩配置、快速滑鼠動作 (例如縮放) 設定等等
 
-如需詳細數據，請參閱我們的 GitHub 版本頁面。
+如需更多詳細資料，請參閱我們的 GitHub 發行版本頁面。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/SBConfig.json

@@ -20,6 +20,7 @@
     "DisableAutoPackageNameFormatting": false
   },
   "appSubmission": {
+    "appId": "9N8G5RFZ9XK3",
     "productId": "00014050269303149694",
     "targetPublishMode": "NotSet",
     "targetPublishDate": null,

build/StoreSubmission/Stable/PDPs/de-DE/PDP.xml

@@ -56,12 +56,9 @@ Dies ist ein Open Source-Projekt, und wir freuen uns über die Teilnahme an der
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-– Wir haben umgeschrieben, wie Konsolenanwendungen im Terminal gehostet werden! Melden Sie alle auftretenden Fehler.
-– Terminal unterstützt jetzt Sixels!
-– Sie können jetzt einen angedockten Bereich öffnen, der Ausschnitte von Befehlen enthält, die Sie gespeichert haben, um sie später zu verwenden.
-– Für Benutzer der Eingabeaufforderung der neuesten Version von Windows 11 wird möglicherweise ein QuickInfo-Symbol angezeigt, das installierbare Software von WinGet vorschlägt.
-– Ausgewählter Text wird jetzt viel sichtbarer (und anpassbarer!).
-- Eine Reihe von Zuverlässigkeitsfehlern, Benutzerfreundlichkeitsproblemen und Ärgernissen wurden behoben.
+– Wir haben der Benutzeroberfläche Dutzende von Einstellungen hinzugefügt, die nur einmal in der JSON-Datei vorhanden waren, einschließlich einer neuen Seite zum Anpassen des Layouts Ihres Menüs „Neue Registerkarte“!
+– Wir haben die Fensterverwaltung umgestaltet, um die Zuverlässigkeit zu verbessern. Melden Sie alle Fehler, die beim alias „wt.exe“ auftreten
+– Profile zeigen jetzt ein Symbol an, wenn sie ausgeblendet wurden oder auf Programme verweisen, die deinstalliert wurden.
 
 Weitere Informationen finden Sie auf unserer GitHub-Releaseseite.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/en-US/PDP.xml

@@ -54,14 +54,11 @@ This is an open source project and we welcome community participation. To partic
     <!-- _locComment_text="{MaxLength=255} App DevStudio" -->
   </DevStudio>
   <ReleaseNotes _locID="App_ReleaseNotes">
-    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__} App Release Note" -->Version __VERSION_NUMBER__
+    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__}{Locked=wt.exe} App Release Note" -->Version __VERSION_NUMBER__
 
-- We've rewritten how console applications are hosted inside Terminal! Please report any bugs you encounter.
-- Terminal now supports Sixels!
-- You can now open a docked panel containing snippets of commands you have saved to use later
-- Command Prompt users on the latest Windows 11 release may see a "quick tip" icon that suggests installable software from WinGet
-- Selected text will now be much more visible (and customizable!)
-- A number of reliabilty bugs, convenience issues and annoyances have been fixed.
+- We've added dozens of settings to the UI that once only existed in the JSON file, including a new page for customizing the layout of your New Tab menu!
+- We have rearchitected window management to improve reliability; please file any bugs you encounter with the wt.exe alias
+- Profiles now show an icon if they've been hidden or refer to programs which were uninstalled.
 
 Please see our GitHub releases page for additional details.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/es-ES/PDP.xml

@@ -56,12 +56,9 @@ Este es un proyecto de fuente abierta y animamos a la comunidad a participar. Pa
   <ReleaseNotes>
     Versión __VERSION_NUMBER__
 
-- Hemos reescrito cómo se hospedan las aplicaciones de consola en Terminal. Informe de los errores que encuentre.
-- Terminal ahora admite síxeles.
-- Ahora puede abrir un panel acoplado que contenga fragmentos de comandos que haya guardado para usarlos más adelante
-- Los usuarios del símbolo del sistema de la versión más reciente de Windows 11 pueden ver un icono de "sugerencia rápida" que sugiere software instalable de WinGet
-- El texto seleccionado ahora será mucho más visible (y personalizable)
-- Se han corregido varios errores de fiabilidad, problemas de comodidad y molestias.
+- Hemos añadido decenas de configuraciones a la interfaz de usuario que antes solo existían en el archivo JSON, incluida una nueva página para personalizar el diseño del menú Nueva pestaña.
+- Hemos reestructurado la gestión de ventanas para mejorar la fiabilidad; informe de cualquier error que encuentre con el alias wt.exe
+- Ahora, los perfiles muestran un icono si han sido ocultados o hacen referencia a programas que han sido desinstalados.
 
 Consulte la página de versiones de GitHub para más información.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/fr-FR/PDP.xml

@@ -56,12 +56,9 @@ Il s’agit d’un projet open source et nous encourageons la participation à l
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-– Nous avons réécrit la manière dont les applications de console sont hébergées dans Terminal ! Veuillez signaler tout bogue que vous rencontrez.
-– Terminal prend désormais en charge Sixels !
-– Vous pouvez maintenant ouvrir un panneau ancré contenant des extraits de commandes que vous avez enregistrées pour les utiliser ultérieurement
-– Les utilisateurs de l’invite de commande sur la dernière version de Windows 11 peuvent voir une icône « astuce rapide » qui suggère un logiciel installable à partir de WinGet
-– Le texte sélectionné sera désormais beaucoup plus visible (et personnalisable !)
-– Un certain nombre de bogues de fiabilité, de problèmes de commodité et de désagréments ont été corrigés.
+- Nous avons ajouté des dizaines de paramètres à l’interface utilisateur qui n’existaient auparavant que dans le fichier JSON, y compris une nouvelle page pour personnaliser la disposition de votre menu Nouvel onglet.
+- Nous avons fait une refonte de la gestion des fenêtres pour améliorer la fiabilité. Veuillez signaler les bogues que vous rencontrez avec l’alias wt.exe.
+- Les profils affichent désormais une icône s’ils ont été masqués ou s’ils font référence à des programmes qui ont été désinstallés.
 
 Veuillez consulter notre page des versions GitHub pour découvrir d’autres détails.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/it-IT/PDP.xml

@@ -56,12 +56,9 @@ Si tratta di un progetto open source e la partecipazione della community è molt
   <ReleaseNotes>
     Versione __VERSION_NUMBER__
 
-- Abbiamo cambiato il modo in cui le applicazioni della console vengono ospitate all’interno di Terminale. Segnala eventuali bug riscontrati.
-- Ora Terminale supporta i Sixel.
-- Puoi aprire un pannello ancorato contenente frammenti di comandi salvati per usarli in seguito
-- Gli utenti che usano il prompt dei comandi nella versione più recente di Windows 11 potrebbero visualizzare un’icona di “suggerimento rapido” che consiglia il software installabile da WinGet
-- Il testo selezionato sarà ora molto più visibile, oltre che personalizzabile.
-- Sono stati risolti diversi bug di affidabilità e problemi di ordine pratico.
+- Abbiamo aggiunto decine di impostazioni all'interfaccia utente che in precedenza esistevano solo nel file JSON, inclusa una nuova pagina per personalizzare il layout del menu Nuova scheda.
+- Abbiamo riprogettato la gestione delle finestre per migliorarne l'affidabilità; segnala eventuali bug riscontrati con l'alias wt.exe
+- I profili ora mostrano un'icona se sono stati nascosti o se fanno riferimento a programmi disinstallati.
 
 Per altri dettagli, vedi la pagina delle release di GitHub.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/ja-JP/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     バージョン __VERSION_NUMBER__
 
-- ターミナル内でのコンソール アプリケーションのホスト方法を書き換えました。発生したバグを報告してください。
-- ターミナルで Sixels がサポートされるようになりました。
-- 後で使用するために保存したコマンドのスニペットを含むドッキング パネルを開けるようになりました
-- 最新の Windows 11 リリースのコマンド プロンプト ユーザーには、WinGet からインストール可能なソフトウェアを提案する "クイック ヒント" アイコンが表示される場合があります
-- 選択したテキストが大幅に見やすくなりました (カスタマイズも可能です)
-- 信頼性に関するバグ、利便性の問題、不快な問題の多くが修正されました。
+- 新しいタブ メニューのレイアウトをカスタマイズするための新しいページなど、以前は JSON ファイルにしかなかった設定が UI に多数追加されました。
+- 信頼性を向上させるために、ウィンドウ管理を再設計しました。wt.exe エイリアスで発生したバグを報告してください
+- プロファイルが非表示になっている場合や、アンインストールされたプログラムを参照している場合に、アイコンが表示されるようになりました。
 
 詳細については、GitHub リリース ページをご覧ください。
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/ko-KR/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     버전 __VERSION_NUMBER__
 
-- 콘솔 애플리케이션이 터미널 내에서 호스팅되는 방법을 다시 작성했습니다. 버그가 발생하면 보고해 주세요.
-- 터미널에서 이제 Sixels를 지원합니다.
-- 이제 나중에 사용하기 위해 저장한 명령 조각이 포함된 도킹된 패널을 열 수 있습니다.
-- 최신 Windows 11 릴리스의 명령 프롬프트 사용자는 WinGet에서 설치 가능한 소프트웨어를 추천하는 "간단한 팁" 아이콘을 볼 수 있습니다.
-- 이제 선택한 텍스트가 훨씬 더 잘 보입니다(사용자 지정 가능).
-- 여러 안정성 버그, 편의성 문제, 불편 사항이 수정되었습니다.
+- 새 탭 메뉴의 레이아웃을 사용자 지정하기 위한 새 페이지를 포함하여 JSON 파일에만 존재했던 수십 개의 설정을 UI에 추가
+- 안정성을 개선하기 위해 창 관리 구조를 재구성했습니다. wt.exe 별칭과 관련하여 발생한 버그 신고
+- 프로필이 숨겨졌거나 제거된 프로그램을 참조하는 경우 이제 프로필에 아이콘이 표시됩니다.
 
 자세한 내용은 GitHub 릴리스 페이지를 참조하세요.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/pt-BR/PDP.xml

@@ -54,14 +54,11 @@ Este é um projeto de código aberto e a participação da comunidade é bem-vin
     
   </DevStudio>
   <ReleaseNotes>
-    Versão __VERSION_NUMBER__
+    Version __VERSION_NUMBER__
 
-– Reescrevemos a forma como os aplicativos de console são hospedados no Terminal! Relate os bugs encontrados.
-– O terminal agora oferece suporte ao Sixels!
-– Agora você pode abrir um painel acoplado contendo snippets de comandos que você salvou para usar mais tarde
-– Os usuários do Prompt de Comando na versão mais recente do Windows 11 podem ver um ícone de "dica rápida", que sugere softwares instaláveis a partir do WinGet
-– O texto selecionado agora ficará muito mais visível (e personalizável!)
-– Vários bugs de confiabilidade, problemas de conveniência e incômodos foram resolvidos.
+– Adicionamos várias configurações à interface do usuário que antes só existiam no arquivo JSON, incluindo uma nova página para personalizar o layout do seu menu Nova Guia!
+– Reestruturamos o gerenciamento de janelas para melhorar a confiabilidade; registre os bugs que você encontrar com o alias wt.exe
+– Os perfis agora exibem um ícone se estiverem ocultos ou se referirem a programas que foram desinstalados.
 
 Confira nossa página de lançamentos no GitHub para obter mais detalhes.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/qps-ploc/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/qps-ploca/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/qps-plocm/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/ru-RU/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     Версия __VERSION_NUMBER__
 
-– Мы переписали, как консольные приложения размещаются внутри Терминала! Сообщайте о любых ошибках, с которыми вы столкнулись.
-– Терминал теперь поддерживает форматы Sixel!
-– Теперь вы можете открыть закрепленную панель, содержащую фрагменты команд, которые вы сохранили для использования в дальнейшем
-– Пользователи командной строки в новейшем выпуске Windows 11 могут увидеть значок "краткой подсказки", который предлагает устанавливаемые программы из WinGet
-– Выделенный текст теперь станет более видимым (и настраиваемым!)
-– Исправлено несколько ошибок надежности, проблем с удобством, а также устранены раздражающие моменты.
+– Мы добавили в пользовательский интерфейс десятки параметров, которые ранее существовали только в JSON-файле, включая новую страницу для настройки макета меню новой вкладки.
+– Мы переработали управление окнами для повышения надежности. Сообщайте о любых ошибках, которые вы обнаружите с псевдонимом wt.exe
+– Профили теперь отображают значок, если они были скрыты или ссылаются на программы, которые были удалены.
 
 Дополнительные сведения см. на странице выпусков GitHub.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/uk-UA/PDP.xml

@@ -0,0 +1,181 @@
+<?xml version="1.0" encoding="utf-8"?>
+<ProductDescription language="en-us" xmlns="http://schemas.microsoft.com/appx/2012/ProductDescription" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xml:lang="en-us" Release="">
+  <AppStoreName _locID="App_AppStoreName">
+    <!-- This is optional.  AppStoreName is typically extracted from your package's AppxManifest DisplayName property. -->
+    <!-- Uncomment (and localize) this Store name if your application package does not contain a localization for the DisplayName in this language. -->
+    <!-- Leaving this uncommented for a language that your application package DOES contain a DisplayName for will result in a submission failure with the API. -->
+    <!-- _locComment_text="{MaxLength=200} App AppStoreName" -->
+    <!-- Windows Terminal -->
+  </AppStoreName>
+  <Keywords>
+    <!-- Valid length: 30 character limit, up to 7 elements -->
+    <Keyword _locID="App_keyword1">
+      <!-- _locComment_text="{MaxLength=30} App keyword 1" -->Термінал</Keyword>
+    <Keyword _locID="App_keyword2">
+      <!-- _locComment_text="{MaxLength=30} App keyword 2" -->Консоль</Keyword>
+    <Keyword _locID="App_keyword3">
+      <!-- _locComment_text="{MaxLength=30} App keyword 3" -->
+    </Keyword>
+    <Keyword _locID="App_keyword4">
+      <!-- _locComment_text="{MaxLength=30} App keyword 4" -->
+    </Keyword>
+    <Keyword _locID="App_keyword5">
+      <!-- _locComment_text="{MaxLength=30} App keyword 5" -->
+    </Keyword>
+    <Keyword _locID="App_keyword6">
+      <!-- _locComment_text="{MaxLength=30} App keyword 6" -->
+    </Keyword>
+    <Keyword _locID="App_keyword7">
+      <!-- _locComment_text="{MaxLength=30} App keyword 7" -->
+    </Keyword>
+  </Keywords>
+  <Description _locID="App_Description">
+      <!-- _locComment_text="{MaxLength=10000} {Locked=Windows} App Description" -->Термінал Windows - це сучасний, швидкий, ефективний, потужний та продуктивний термінальний застосунок для користувачів інструментів командного рядка та оболонок, таких як командний рядок, PowerShell та WSL. Його основні функції включають кілька вкладок, панелей, підтримку символів Unicode та UTF-8, механізм візуалізації тексту з прискоренням GPU, а також користувацькі теми, стилі та конфігурації.
+
+Це проєкт з відкритим кодом, і ми вітаємо участь спільноти. Щоб взяти участь, будь ласка, відвідайте https://github.com/microsoft/terminal </Description>
+  <ShortDescription _locID="App_ShortDescription">
+    <!-- Only used for games. This description appears in the Information section of the Game Hub on Xbox One, and helps customers understand more about your game. -->
+    <!-- _locComment_text="{MaxLength=500} App ShortDescription" -->
+  </ShortDescription>
+  <ShortTitle _locID="App_ShortTitle">
+    <!-- A shorter version of your product's name. If provided, this shorter name may appear in various places on Xbox One (during installation, in Achievements, etc.) in place of the full title of your product. -->
+    <!-- _locComment_text="{MaxLength=50} App ShortTitle" -->
+  </ShortTitle>
+  <SortTitle _locID="App_SortTitle">
+    <!-- If your product could be alphabetized in different ways, you can enter another version here. This may help customers find the product more quickly when searching. -->
+    <!-- _locComment_text="{MaxLength=255} App SortTitle" -->
+  </SortTitle>
+  <VoiceTitle _locID="App_VoiceTitle">
+    <!-- An alternate name for your product that, if provided, may be used in the audio experience on Xbox One when using Kinect or a headset. -->
+    <!-- _locComment_text="{MaxLength=255} App VoiceTitle" -->
+  </VoiceTitle>
+  <DevStudio _locID="App_DevStudio">
+    <!-- Specify this value if you want to include a "Developed by" field in the listing. (The "Published by" field will list the publisher display name associated with your account, whether or not you provide a devStudio value.) -->
+    <!-- _locComment_text="{MaxLength=255} App DevStudio" -->
+  </DevStudio>
+  <ReleaseNotes _locID="App_ReleaseNotes">
+    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__}{Locked=wt.exe} App Release Note" -->Версія __VERSION_NUMBER__
+
+- Ми додали десятки налаштувань до інтерфейсу користувача, які раніше існували лише у файлі JSON, включаючи нову сторінку для налаштування макета меню «Нова вкладка»!
+- Ми переробили архітектуру керування вікнами для підвищення надійності; будь ласка, повідомляйте про будь-які помилки, з якими ви зіткнулися, за допомогою псевдоніма wt.exe.
+- Профілі тепер відображають значок, якщо вони були приховані, або посилаються на програми, які було видалено.
+
+Будь ласка, перегляньте нашу сторінку релізів GitHub для отримання додаткової інформації.
+  </ReleaseNotes>
+  <ScreenshotCaptions>
+    <!-- Valid length: 200 character limit, up to 9 elements per platform -->
+    <!-- Valid attributes: any of DesktopImage, MobileImage, XboxImage, SurfaceHubImage, and HoloLensImage -->
+    <Caption DesktopImage="acrylic-emoji.png" _locID="App_caption1">
+      <!-- _locComment_text="{MaxLength=200} Screenshot caption 1" -->
+    </Caption>
+    <Caption DesktopImage="panes.png" _locID="App_caption2">
+      <!-- _locComment_text="{MaxLength=200} Screenshot caption 2" -->
+    </Caption>
+    <Caption DesktopImage="htop.png" _locID="App_caption3">
+      <!-- _locComment_text="{MaxLength=200} Screenshot caption 3" -->
+    </Caption>
+  </ScreenshotCaptions>
+  <AdditionalAssets>
+    <!-- Valid elements:-->
+    <!--   HeroImage414x180, HeroImage846x468, HeroImage558x756, HeroImage414x468, HeroImage558x558, HeroImage2400x1200,-->
+    <!--   ScreenshotWXGA, ScreenshotHD720, ScreenshotWVGA, Doublewide, Panoramic, Square,-->
+    <!--   SmallMobileTile, SmallXboxLiveTile, LargeMobileTile, LargeXboxLiveTile, Tile,-->
+    <!--   DesktopIcon, Icon (use this value for the 1:1 300x300 pixels logo), AchievementIcon,-->
+    <!--   ChallengePromoIcon, RewardDisplayIcon, Icon150X150, Icon71X71,-->
+    <!--   BoxArt, BrandedKeyArt, PosterArt, FeaturedPromotionalArt, PromotionalArt16x9, TitledHeroArt-->
+    <!-- There is no content for any of these elements, just a single attribute called FileName. -->
+    <PosterArt FileName="Store Poster Art.png" />
+    <BoxArt FileName="Store Box Art.png" />
+    <PromotionalArt16x9 FileName="Store Thumbnail.png" />
+  </AdditionalAssets>
+  <Trailers>
+    <!-- Maximum number of trailers permitted: 15 -->
+    <Trailer FileName="CC0605_CommandLine_Teaser_WEB_MASTER_H264_1080p_23.976_-16LKFS_-3dbTP_ST.mp4">
+      <Title _locID="App_trailerTitle1">
+        <!-- _locComment_text="{MaxLength=255} Trailer title 1" -->Новий термінал Windows</Title>
+      <Images>
+        <!-- Current maximum of 1 image per trailer permitted. -->
+        <Image FileName="Store Thumbnail.png">
+          <!-- _locComment_text="{Locked} Trailer screenshot 1 description" -->
+        </Image>
+      </Images>
+    </Trailer>
+  </Trailers>
+  <AppFeatures>
+    <!-- Valid length: 200 character limit, up to 20 elements -->
+    <AppFeature _locID="App_feature1">
+      <!-- _locComment_text="{MaxLength=200} App Feature 1" -->Наявність вкладок</AppFeature>
+    <AppFeature _locID="App_feature2">
+      <!-- _locComment_text="{MaxLength=200} App Feature 2" -->Повна підтримка Юнікоду</AppFeature>
+    <AppFeature _locID="App_feature3">
+      <!-- _locComment_text="{MaxLength=200} App Feature 3" -->Рендеринг тексту з прискоренням GPU</AppFeature>
+    <AppFeature _locID="App_feature4">
+      <!-- _locComment_text="{MaxLength=200} App Feature 4" -->Широкі можливості кастомізації</AppFeature>
+    <AppFeature _locID="App_feature5">
+      <!-- _locComment_text="{MaxLength=200} App Feature 5" -->Розділення панелей</AppFeature>
+    <AppFeature _locID="App_feature6">
+      <!-- _locComment_text="{MaxLength=200} App Feature 6" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature7">
+      <!-- _locComment_text="{MaxLength=200} App Feature 7" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature8">
+      <!-- _locComment_text="{MaxLength=200} App Feature 8" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature9">
+      <!-- _locComment_text="{MaxLength=200} App Feature 9" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature10">
+      <!-- _locComment_text="{MaxLength=200} App Feature 10" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature11">
+      <!-- _locComment_text="{MaxLength=200} App Feature 11" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature12">
+      <!-- _locComment_text="{MaxLength=200} App Feature 12" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature13">
+      <!-- _locComment_text="{MaxLength=200} App Feature 13" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature14">
+      <!-- _locComment_text="{MaxLength=200} App Feature 14" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature15">
+      <!-- _locComment_text="{MaxLength=200} App Feature 15" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature16">
+      <!-- _locComment_text="{MaxLength=200} App Feature 16" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature17">
+      <!-- _locComment_text="{MaxLength=200} App Feature 17" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature18">
+      <!-- _locComment_text="{MaxLength=200} App Feature 18" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature19">
+      <!-- _locComment_text="{MaxLength=200} App Feature 19" -->
+    </AppFeature>
+    <AppFeature _locID="App_feature20">
+      <!-- _locComment_text="{MaxLength=200} App Feature 20" -->
+    </AppFeature>
+  </AppFeatures>
+  <RecommendedHardware>
+    <!-- Valid length: 200 character limit, up to 11 elements -->
+    <Recommendation _locID="App_RecommendedHW1">
+      <!-- _locComment_text="{MaxLength=200} App Recommended Hardware 1" -->Клавіатура</Recommendation>
+  </RecommendedHardware>
+  <MinimumHardware>
+    <!-- Valid length: 200 character limit, up to 11 elements -->
+  </MinimumHardware>
+  <CopyrightAndTrademark _locID="App_CopyrightandTrademark">
+    <!-- _locComment_text="{MaxLength=200} Copyright and Trademark" -->Права (c) Корпорація Майкрософт</CopyrightAndTrademark>
+  <AdditionalLicenseTerms _locID="App_AdditionalLicenseTerms">
+    <!-- _locComment_text="{MaxLength=10000} Additional License Terms" -->
+  </AdditionalLicenseTerms>
+  <WebsiteURL _locID="App_WebsiteURL">
+    <!-- _locComment_text="{MaxLength=2048} WebsiteURL" -->https://github.com/microsoft/terminal</WebsiteURL>
+  <SupportContactInfo _locID="App_SupportContactInfo">
+    <!-- _locComment_text="{MaxLength=2048} Support Contact Info" -->https://github.com/microsoft/terminal/issues/new</SupportContactInfo>
+  <PrivacyPolicyURL _locID="App_PrivacyURL">
+    <!-- _locComment_text="{MaxLength=2048} Privacy Policy URL" -->https://go.microsoft.com/fwlink/?LinkID=521839</PrivacyPolicyURL>
+</ProductDescription>

build/StoreSubmission/Stable/PDPs/zh-CN/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-- 我们已改变主机应用程序在终端内的托管方式!请报告遇到的任何 bug。
-- 终端现在支持 Sixels!
-- 现在可以打开一个停靠面板，其中包含已保存供以后使用的命令片段
-- 最新 Windows 11 版本上的命令提示用户可能会看到“快速提示”图标，该图标建议从 WinGet 安装软件
-- 所选文本现在将具有更高的可见性(和可自定义性!)
-- 修复了许多可靠性 bug、便利性问题和令人烦恼的问题。
+- 我们向用户界面添加了许多之前仅存在于 JSON 文件中的设置，包括用于自定义“新建标签页”菜单布局的新页面!
+- 我们已重新架构窗口管理以提高可靠性; 请使用 wt.exe 别名提交您遇到的任何错误
+- 配置文件如果已被隐藏或引用了已卸载的程序，现在会显示一个图标。
 
 有关其他详细信息，请参阅我们的 GitHub 发布页面。
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/zh-TW/PDP.xml

@@ -54,16 +54,13 @@
     
   </DevStudio>
   <ReleaseNotes>
-    版本 __VERSION_NUMBER__
+    Version __VERSION_NUMBER__
 
-- 我們已重寫主機應用程式在終端機內託管的方式!請報告您遇到的錯誤。
-- 終端機現在支援 Sixels!
-- 現在，您可以開啟包含已儲存命令程式碼片段的固定面板，以供稍後使用
-- 最新 Windows 11 版本中的 [命令提示] 使用者可能會看到「快速提示」圖示，建議可自 WinGet 安裝的軟體
-- 選取的文字現在會更明顯 (且可自訂!)
-- 已修正一些可靠性錯誤、便利性問題和令人困擾的問題。
+- 我們已在使用者介面中新增數十個曾經僅存在於 JSON 檔案中的設定，包括一個可自訂新索引標籤選單版面配置的新頁面!
+- 我們已重新架構視窗管理以提升可靠性; 如果您在使用 wt.exe 別名時遇到任何錯誤，請提交錯誤回報
+- 如果設定檔已隱藏或參照已解除安裝的程式，現在會顯示圖示。
 
-如需更多詳細資訊，請參閱我們的 GitHub 發行頁面。
+如需更多詳細資料，請參閱我們的 GitHub 發行版本頁面。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/SBConfig.json

@@ -20,6 +20,7 @@
     "DisableAutoPackageNameFormatting": false
   },
   "appSubmission": {
+    "appId": "9N0DX20HK701",
     "productId": "00013926773940052066",
     "targetPublishMode": "NotSet",
     "targetPublishDate": null,

build/config/GitCheckin.json

@@ -4,7 +4,7 @@
         "collection": "microsoft",
         "project": "OS",
         "repo": "os.2020",
-        "name": "official/rs_we_adept_e4d2",
+        "name": "official/ge_current_directwinpd_deep",
         "workitem": "38106206",
         "CheckinFiles": [
           {

build/config/esrp.build.batch.terminal_constituents.json

@@ -17,7 +17,6 @@
             "PackageContents/WindowsTerminalShellExt.dll",
 
             // The rest
-            "PackageContents/TerminalAzBridge.exe",
             "PackageContents/wt.exe",
             "PackageContents/WindowsTerminal.exe",
             "PackageContents/elevate-shim.exe"

build/config/esrp.build.batch.wpfdotnet.json

@@ -2,7 +2,7 @@
     {
         "MatchedPath": [
             "WpfTerminalControl/net472/Microsoft.Terminal.Wpf.dll",
-            "WpfTerminalControl/net6.0-windows/Microsoft.Terminal.Wpf.dll"
+            "WpfTerminalControl/net8.0-windows/Microsoft.Terminal.Wpf.dll"
         ],
         "SigningInfo": {
             "Operations": [

build/config/template.appinstaller

@@ -14,21 +14,21 @@
     <Package
       Name="Microsoft.UI.Xaml.2.8"
       Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
-      Version="8.2305.5001.0"
+      Version="8.2306.22001.0"
       ProcessorArchitecture="x64"
-      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x64.appx" />
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.5/Microsoft.UI.Xaml.2.8.x64.appx" />
     <Package
       Name="Microsoft.UI.Xaml.2.8"
       Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
-      Version="8.2305.5001.0"
+      Version="8.2306.22001.0"
       ProcessorArchitecture="x86"
-      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x86.appx" />
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.5/Microsoft.UI.Xaml.2.8.x86.appx" />
     <Package
       Name="Microsoft.UI.Xaml.2.8"
       Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
-      Version="8.2305.5001.0"
+      Version="8.2306.22001.0"
       ProcessorArchitecture="arm64"
-      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.arm64.appx" />
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.5/Microsoft.UI.Xaml.2.8.arm64.appx" />
   </Dependencies>
 
   <UpdateSettings>

build/packages.config

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
-  <package id="Microsoft.Taef" version="10.93.240607003" targetFramework="native" />
+  <package id="Microsoft.Taef" version="10.100.251104001" targetFramework="native" />
   <package id="Microsoft.Internal.PGO-Helpers.Cpp" version="0.2.34" targetFramework="native" />
   <package id="Microsoft.Debugging.Tools.PdbStr" version="20220617.1556.0" targetFramework="native" />
   <package id="Microsoft.Debugging.Tools.SrcTool" version="20220617.1556.0" targetFramework="native" />

build/pipelines/ci-caching.yml

@@ -84,7 +84,7 @@ stages:
             buildEverything: true
             keepAllExpensiveBuildOutputs: false
             ${{ if eq(variables['System.PullRequest.IsFork'], 'False') }}:
-              enableMsBuildCaching: true
+              enableCaching: true
 
     - ${{ if eq(parameters.runTests, true) }}:
       - stage: Test_${{ platform }}

build/pipelines/ci.yml

@@ -25,8 +25,6 @@ pr:
 variables:
   - name: runCodesignValidationInjectionBG
     value: false
-  - name: EnablePipelineCache 
-    value: true
 
 #     0.0.yyMM.dd##
 #     0.0.1904.0900
@@ -47,10 +45,6 @@ parameters:
       - x64
       - x86
       - arm64
-  - name: enableMsBuildCaching
-    type: boolean
-    displayName: "Enable MSBuild Caching"
-    default: true
 
 stages:
   - ${{ if eq(parameters.auditMode, true) }}:
@@ -93,8 +87,13 @@ stages:
             buildConfigurations: [Release]
             buildEverything: true
             keepAllExpensiveBuildOutputs: false
-            ${{ if eq(variables['System.PullRequest.IsFork'], 'False') }}:
-              enableMsBuildCaching: ${{ parameters.enableMsBuildCaching }}
+            ${{ if eq(parameters.runTests, true) }}:
+              # Copy the appx files into the bin drop because the LocalTests need them
+              afterBuildSteps:
+                - pwsh: |-
+                    $deps = ./build/scripts/Get-DependenciesFromAppxRecipe.ps1 -Path "$(Terminal.BinDir)/TestHostApp/TestHostApp.build.appxrecipe"
+                    $dir = New-Item -Type Directory "$(Terminal.BinDir)/_testDeps"
+                    $deps | Copy-Item -Destination $dir -Verbose
 
     - ${{ if eq(parameters.runTests, true) }}:
       - stage: Test_${{ platform }}

build/pipelines/daily-loc-submission.yml

@@ -23,7 +23,7 @@ parameters:
     default: true
 
 pool:
-  vmImage: windows-2019
+  vmImage: windows-latest
 
 resources:
   repositories:
@@ -51,8 +51,8 @@ steps:
   displayName: 'Touchdown Build - 7105, PRODEXT'
   inputs:
     teamId: 7105
-    TDBuildServiceConnection: $(TouchdownServiceConnection)
-    authType: SubjectNameIssuer
+    FederatedIdentityTDBuildServiceConnection: $(TouchdownServiceConnection)
+    authType: FederatedIdentityTDBuild
     resourceFilePath: |
      **\en-US\*.resw
      build\StoreSubmission\Stable\PDPs\en-us\PDP.xml

build/pipelines/feature-flag-ci.yml

@@ -31,7 +31,7 @@ stages:
         - template: ./templates-v2/job-build-project.yml
           parameters:
             pool: # This only runs in CI
-                name: SHINE-OSS-L
+              name: SHINE-OSS-L
             buildPlatforms: [x64]
             buildConfigurations: [Release]
             buildEverything: true

build/pipelines/ob-release.yml

@@ -53,8 +53,12 @@ parameters:
     displayName: "Publish Symbols to MSDL"
     type: boolean
     default: true
+  - name: createVpack
+    displayName: "Create a VPack for Windows"
+    type: boolean
+    default: false
   - name: publishVpackToWindows
-    displayName: "Publish VPack to Windows"
+    displayName: "Publish above VPack to Windows"
     type: boolean
     default: false
 
@@ -89,6 +93,7 @@ extends:
       clientId: $(SigningOriginalClientId)
     terminalInternalPackageVersion: ${{ parameters.terminalInternalPackageVersion }}
     publishSymbolsToPublic: ${{ parameters.publishSymbolsToPublic }}
+    createVpack: ${{ parameters.createVpack }}
     publishVpackToWindows: ${{ parameters.publishVpackToWindows }}
     symbolPublishingSubscription: $(SymbolPublishingServiceConnection)
     symbolPublishingProject: $(SymbolPublishingProject)

build/pipelines/pgo.yml

@@ -74,7 +74,7 @@ stages:
         parameters:
           jobName: MergePGD
           pool:
-            vmImage: 'windows-2022'
+            vmImage: 'windows-latest'
           buildConfiguration: Release
           buildPlatforms: ${{ parameters.buildPlatforms }}
           artifactStem: -instrumentation
@@ -82,7 +82,7 @@ stages:
       - template: ./templates-v2/job-pgo-build-nuget-and-publish.yml
         parameters:
           pool:
-            vmImage: 'windows-2022'
+            vmImage: 'windows-latest'
           dependsOn: MergePGD
           buildConfiguration: Release
           artifactStem: -instrumentation

build/pipelines/templates-v2/job-build-package-wpf.yml

@@ -75,9 +75,9 @@ jobs:
   - template: .\steps-restore-nuget.yml
 
   - task: VSBuild@1
-    displayName: Build solution OpenConsole.sln for WPF Control (Pack)
+    displayName: Build solution OpenConsole.slnx for WPF Control (Pack)
     inputs:
-      solution: 'OpenConsole.sln'
+      solution: 'OpenConsole.slnx'
       msbuildArgs: >-
         /p:WindowsTerminalReleaseBuild=true;Version=$(XES_PACKAGEVERSIONNUMBER)
         /p:NoBuild=true

build/pipelines/templates-v2/job-build-project.yml

@@ -68,9 +68,12 @@ parameters:
   - name: signingIdentity
     type: object
     default: {}
-  - name: enableMsBuildCaching
+  - name: enableCaching
     type: boolean
     default: false
+  - name: afterBuildSteps
+    type: stepList
+    default: []
 
 jobs:
 - job: ${{ parameters.jobName }}
@@ -144,7 +147,7 @@ jobs:
       }
     displayName: Prepare Build and Sign Targets
 
-  - ${{ if eq(parameters.enableMsBuildCaching, true) }}:
+  - ${{ if eq(parameters.enableCaching, true) }}:
     - pwsh: |-
         $MSBuildCacheParameters = ""
         $MSBuildCacheParameters += " -graph"
@@ -170,9 +173,9 @@ jobs:
   - ${{ parameters.beforeBuildSteps }}
 
   - task: VSBuild@1
-    displayName: Build OpenConsole.sln
+    displayName: Build OpenConsole.slnx
     inputs:
-      solution: 'OpenConsole.sln'
+      solution: 'OpenConsole.slnx'
       msbuildArgs: >-
         /p:WindowsTerminalOfficialBuild=true;WindowsTerminalBranding=${{ parameters.branding }};PGOBuildMode=${{ parameters.pgoBuildMode }}
         ${{ parameters.additionalBuildOptions }}
@@ -183,7 +186,7 @@ jobs:
       configuration: $(BuildConfiguration)
       msbuildArchitecture: x64
       maximumCpuCount: true
-    ${{ if eq(parameters.enableMsBuildCaching, true) }}:
+    ${{ if eq(parameters.enableCaching, true) }}:
       env:
         SYSTEM_ACCESSTOKEN: $(System.AccessToken)
 
@@ -192,7 +195,7 @@ jobs:
       artifact: logs-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.artifactStem }}
       condition: always()
       displayName: Publish Build Log
-    - ${{ if eq(parameters.enableMsBuildCaching, true) }}:
+    - ${{ if eq(parameters.enableCaching, true) }}:
       - publish: $(Build.SourcesDirectory)\MSBuildCacheLogs
         artifact: logs-msbuildcache-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.artifactStem }}
         condition: always()
@@ -203,13 +206,15 @@ jobs:
       inputs:
         contents: $(Build.SourcesDirectory)/msbuild.binlog
         TargetFolder: $(Terminal.BinDir)
-    - ${{ if eq(parameters.enableMsBuildCaching, true) }}:
+    - ${{ if eq(parameters.enableCaching, true) }}:
       - task: CopyFiles@2
         displayName: Copy MSBuildCache Logs
         inputs:
           contents: $(Build.SourcesDirectory)/MSBuildCacheLogs/**
           TargetFolder: $(Terminal.BinDir)/MSBuildCacheLogs
 
+  - ${{ parameters.afterBuildSteps }}
+
   # This saves ~2GiB per architecture. We won't need these later.
   # Removes:
   # - All .lib that do not have an associated .exp (which would indicate that they are import libs)

build/pipelines/templates-v2/job-check-code-format.yml

@@ -1,7 +1,7 @@
 jobs:
 - job: CodeFormatCheck
   displayName: Check Code Format
-  pool: { vmImage: windows-2022 }
+  pool: { vmImage: windows-latest }
 
   steps:
   - checkout: self

build/pipelines/templates-v2/job-deploy-to-azure-storage.yml

@@ -86,7 +86,7 @@ jobs:
         $MachineToken = $env:SYSTEM_ACCESSTOKEN | ConvertTo-SecureString -AsPlainText -Force
         $Credential = [PSCredential]::new("ONEBRANCH_TOKEN", $MachineToken)
         $MachineToken = $null
-        $Feed = "https://pkgs.dev.azure.com/shine-oss/terminal/_packaging/TerminalDependencies/nuget/v3/index.json"
+        $Feed = "https://pkgs.dev.azure.com/shine-oss/terminal/_packaging/TerminalDependencies%40Local/nuget/v3/index.json"
         Register-PSResourceRepository -Name "PSGalleryUpstream" -Uri $Feed -Trusted
         Get-PSResourceRepository
 

build/pipelines/templates-v2/job-submit-windows-vpack.yml

@@ -69,10 +69,3 @@ jobs:
       artifact: $(JobOutputArtifactName)
       displayName: 'Publish VPack Manifest to Drop'
 
-  - task: PkgESFCIBGit@12
-    displayName: 'Submit VPack Manifest to Windows'
-    inputs:
-      configPath: '$(Build.SourcesDirectory)\build\config\GitCheckin.json'
-      artifactsDirectory: $(XES_VPACKMANIFESTDIRECTORY)
-      prTimeOut: 5
-

build/pipelines/templates-v2/job-test-project.yml

@@ -58,6 +58,24 @@ jobs:
         filePath: build\scripts\Run-Tests.ps1
         arguments: -MatchPattern '*feature.test*.dll' -Platform '$(OutputBuildPlatform)' -Configuration '$(BuildConfiguration)' -LogPath '${{ parameters.testLogPath }}' -Root "$(Terminal.BinDir)"
 
+    # Load-bearing: This needs to be Windows PowerShell, not pwsh, due to Add-AppxPackage not working in pwsh.
+    - powershell: |-
+        $deps = Get-ChildItem -Recurse "$(Terminal.BinDir)/_testDeps"
+        $deps | % {
+          Write-Host "Installing $($_.FullName)..."
+          Add-AppxPackage -Path $_.FullName -ErrorAction:Ignore
+        }
+      displayName: 'Install LocalTest Dependencies'
+
+    - task: PowerShell@2
+      displayName: 'Run Local Tests'
+      inputs:
+        pwsh: true
+        targetType: filePath
+        filePath: build\scripts\Run-Tests.ps1
+        arguments: -MatchPattern '*LocalTests*.dll' -Platform '$(OutputBuildPlatform)' -Configuration '$(BuildConfiguration)' -LogPath '${{ parameters.testLogPath }}' -Root "$(Terminal.BinDir)"
+      condition: and(succeeded(), ne(variables['PGOBuildMode'], 'Instrument'))
+
   - task: PowerShell@2
     displayName: 'Convert Test Logs from WTL to xUnit format'
     condition: always()

build/pipelines/templates-v2/pipeline-onebranch-full-release-build.yml

@@ -49,6 +49,9 @@ parameters:
   - name: symbolExpiryTime
     type: string
     default: 36530 # This is the default from PublishSymbols@2
+  - name: createVpack
+    type: boolean
+    default: false
   - name: publishVpackToWindows
     type: boolean
     default: false
@@ -192,8 +195,8 @@ extends:
                   ob_outputDirectory: $(JobOutputDirectory)
                   ob_artifactBaseName: $(JobOutputArtifactName)
                   ### This job is also in charge of submitting the vpack to Windows if it's enabled
-                  ob_createvpack_enabled: ${{ and(parameters.buildTerminal, parameters.publishVpackToWindows) }}
-                  ob_updateOSManifest_enabled: ${{ and(parameters.buildTerminal, parameters.publishVpackToWindows) }}
+                  ob_createvpack_enabled: ${{ and(parameters.buildTerminal, parameters.createVpack) }}
+                  ob_updateOSManifest_enabled: ${{ and(parameters.buildTerminal, parameters.createVpack, parameters.publishVpackToWindows) }}
                   ### If enabled above, these options are in play.
                   ob_createvpack_packagename: 'WindowsTerminal.app'
                   ob_createvpack_owneralias: 'conhost@microsoft.com'
@@ -229,7 +232,7 @@ extends:
                       New-Item "$(JobOutputDirectory)/vpack" -Type Directory
                     displayName: Make sure the vpack directory exists
 
-                  - ${{ if parameters.publishVpackToWindows }}:
+                  - ${{ if parameters.createVpack }}:
                     - pwsh: |-
                         Copy-Item -Verbose -Path "$(MsixBundlePath)" -Destination (Join-Path "$(JobOutputDirectory)/vpack" 'Microsoft.WindowsTerminal_8wekyb3d8bbwe.msixbundle')
                       displayName: Stage msixbundle for vpack

build/pipelines/templates-v2/steps-restore-nuget.yml

@@ -19,14 +19,16 @@ steps:
     restoreSolution: build/packages.config
     restoreDirectory: '$(Build.SourcesDirectory)\packages'
 
-- task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
+- task: VSBuild@1
   displayName: Restore NuGet packages for solution
   inputs:
-    command: restore
-    feedsToUse: config
-    configPath: NuGet.config
-    restoreSolution: OpenConsole.sln
-    restoreDirectory: '$(Build.SourcesDirectory)\packages'
+    solution: 'OpenConsole.slnx'
+    msbuildArgs: /t:Restore
+    platform: $(BuildPlatform)
+    configuration: $(BuildConfiguration)
+    msbuildArchitecture: x64
+  env:
+    SYSTEM_ACCESSTOKEN: $(System.AccessToken)
 
 - task: 333b11bd-d341-40d9-afcf-b32d5ce6f23b@2
   displayName: Restore NuGet packages for global nuget

build/scripts/Get-DependenciesFromAppxRecipe.ps1

@@ -0,0 +1,17 @@
+[CmdletBinding()]
+Param(
+    [Parameter(Mandatory=$true, ValueFromPipeline=$true,
+      HelpMessage="Path to the .appxrecipe to parse")]
+    [string]
+    $Path
+)
+
+$Recipe = [xml](Get-Content $Path)
+$ResolvedSDKReferences = $Recipe.Project.ItemGroup.ResolvedSDKReference
+
+$ResolvedSDKReferences |
+    Where-Object Architecture -eq $Recipe.Project.PropertyGroup.PackageArchitecture |
+    ForEach-Object {
+        $l = [Uri]::UnescapeDataString($_.AppxLocation)
+        Get-Item $l
+    }

consolegit2gitfilters.json

@@ -26,7 +26,12 @@
     "/doc/user-docs/",
     "/src/tools/ansi-color/",
     "/src/tools/ColorTool/",
+    "/src/tools/scratch/",
+    "/src/tools/ConsoleBench/",
+    "/src/tools/schemes-fragment/",
     "/scratch/",
+    "/tools/ReleaseEngineering/",
+    "/policies/",
     "Scratch.sln",
   ],
   "SuffixFilters": [
@@ -44,6 +49,11 @@
     ".rec",
     ".err",
     "XamlStyler.json",
-    ".xlsx"
+    ".xlsx",
+    ".vcxproj",
+    ".vcxproj.filters",
+    ".Build.props",
+    ".Build.targets",
+    "OpenConsole.slnx"
   ]
 }

custom.props

@@ -5,7 +5,7 @@
     <XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
     <XesBaseYearForStoreVersion>2025</XesBaseYearForStoreVersion>
     <VersionMajor>1</VersionMajor>
-    <VersionMinor>24</VersionMinor>
+    <VersionMinor>25</VersionMinor>
     <VersionInfoProductName>Windows Terminal</VersionInfoProductName>
     <VersionInfoCulture>1033</VersionInfoCulture>
     <!-- The default has a spacing problem -->

dep/Console/ntcsrdll.h

@@ -7,9 +7,17 @@ Licensed under the MIT license.
 
 #include <ntcsrmsg.h>
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 NTSTATUS CsrClientCallServer(
     PCSR_API_MSG m,
     PCSR_CAPTURE_HEADER CaptureBuffer OPTIONAL,
     ULONG ApiNumber,
     ULONG ArgLength
 );
+
+#ifdef __cplusplus
+}
+#endif

dep/Console/ntlpcapi.h

@@ -5,6 +5,10 @@ Licensed under the MIT license.
 
 #pragma once
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 #define OB_FILE_OBJECT_TYPE 1
 
 typedef struct _PORT_MESSAGE {
@@ -124,3 +128,7 @@ NTSTATUS NtAlpcQueryInformationMessage(
     ULONG Length,
     PULONG ReturnLength
 );
+
+#ifdef __cplusplus
+}
+#endif

dep/nuget/packages.config

@@ -3,13 +3,13 @@
 <packages>
   <!-- Native packages -->
   <package id="Microsoft.Internal.PGO-Helpers.Cpp" version="0.2.34" targetFramework="native" />
-  <package id="Microsoft.Taef" version="10.93.240607003" targetFramework="native" />
-  <package id="Microsoft.Windows.CppWinRT" version="2.0.230207.1" targetFramework="native" />
-  <package id="Microsoft.Internal.Windows.Terminal.ThemeHelpers" version="0.7.230706001" targetFramework="native" />
+  <package id="Microsoft.Taef" version="10.100.251104001" targetFramework="native" />
+  <package id="Microsoft.Windows.CppWinRT" version="2.0.250303.1" targetFramework="native" />
+  <package id="Microsoft.Internal.Windows.Terminal.ThemeHelpers" version="0.8.250811004" targetFramework="native" />
   <package id="Microsoft.VisualStudio.Setup.Configuration.Native" version="2.3.2262" targetFramework="native" developmentDependency="true" />
   <package id="Microsoft.UI.Xaml" version="2.8.4" targetFramework="native" />
   <package id="Microsoft.Web.WebView2" version="1.0.1661.34" targetFramework="native" />
-  <package id="Microsoft.Windows.ImplementationLibrary" version="1.0.240122.1" targetFramework="native" developmentDependency="true" />
+  <package id="Microsoft.Windows.ImplementationLibrary" version="1.0.250325.1" targetFramework="native" developmentDependency="true" />
   <package id="Microsoft.WindowsPackageManager.ComInterop" version="1.8.1911" targetFramework="native" developmentDependency="true" />
 
   <!-- Managed packages -->
@@ -20,7 +20,7 @@
   <package id="Selenium.WebDriver" version="3.5.0" targetFramework="net45" />
 
   <!-- MSBuildCache -->
-  <package id="Microsoft.MSBuildCache.AzurePipelines" version="0.1.318-preview" />
-  <package id="Microsoft.MSBuildCache.Local" version="0.1.318-preview" />
-  <package id="Microsoft.MSBuildCache.SharedCompilation" version="0.1.318-preview" />
+  <package id="Microsoft.MSBuildCache.AzurePipelines" version="0.1.283-preview" />
+  <package id="Microsoft.MSBuildCache.Local" version="0.1.283-preview" />
+  <package id="Microsoft.MSBuildCache.SharedCompilation" version="0.1.283-preview" />
 </packages>

doc/building.md

@@ -7,7 +7,7 @@ This repository uses [git submodules](https://git-scm.com/book/en/v2/Git-Tools-S
 git submodule update --init --recursive
 ```
 
-OpenConsole.sln may be built from within Visual Studio or from the command-line using a set of convenience scripts & tools in the **/tools** directory:
+OpenConsole.slnx may be built from within Visual Studio or from the command-line using a set of convenience scripts & tools in the **/tools** directory:
 
 When using Visual Studio, be sure to set up the path for code formatting. To download the required clang-format.exe file, follow one of the building instructions below and run:
 ```powershell
@@ -103,7 +103,7 @@ If you want to use .nupkg files instead of the downloaded Nuget package, you can
 The Terminal is bundled as an `.msix`, which is produced by the `CascadiaPackage.wapproj` project. To build that project from the commandline, you can run the following (from a window you've already run `tools\razzle.cmd` in):
 
 ```cmd
-"%msbuild%" "%OPENCON%\OpenConsole.sln" /p:Configuration=%_LAST_BUILD_CONF% /p:Platform=%ARCH% /p:AppxSymbolPackageEnabled=false /t:Terminal\CascadiaPackage /m
+"%msbuild%" "%OPENCON%\OpenConsole.slnx" /p:Configuration=%_LAST_BUILD_CONF% /p:Platform=%ARCH% /p:AppxSymbolPackageEnabled=false /t:Terminal\CascadiaPackage /m
 ```
 
 This takes quite some time, and only generates an `msix`. It does not install the msix. To deploy the package:

doc/cascadia/profiles.schema.json

@@ -2302,8 +2302,15 @@
       "additionalProperties": false,
       "properties": {
         "id": {
-          "description": "The ID of the command this keybinding should execute.",
-          "type": "string"
+          "description": "The ID of the command this keybinding should execute (or null to disable a default).",
+          "oneOf": [
+            {
+              "type": "string"
+            },
+            {
+              "type": "null"
+            }
+          ]
         },
         "keys": {
           "description": "Defines the key combinations used to call the command. It must be composed of...\n -any number of modifiers (ctrl/alt/shift)\n -a non-modifier key",
@@ -2459,6 +2466,7 @@
           "description": "Direct3D 11 provides a more performant and feature-rich experience, whereas Direct2D is more stable. The default option \"Automatic\" will pick the API that best fits your graphics hardware. If you experience significant issues, consider using Direct2D.",
           "type": "string",
           "enum": [
+            "automatic",
             "direct2d",
             "direct3d11"
           ]
@@ -2472,8 +2480,9 @@
           "type": "boolean"
         },
         "experimental.input.forceVT": {
-          "description": "Force the terminal to use the legacy input encoding. Certain keys in some applications may stop working when enabling this setting.",
-          "type": "boolean"
+          "type": "boolean",
+          "description": "[Deprecated] Replaced with the \"compatibility.input.forceVT\" profile setting.",
+          "deprecated": true
         },
         "experimental.useBackgroundImageForWindow": {
           "default": false,
@@ -2520,14 +2529,14 @@
           "type": "string"
         },
         "rowsToScroll": {
-          "default": "system",
-          "description": "This parameter once allowed you to override the systemwide \"choose how many lines to scroll at one time\" setting. It no longer does so. However, you can customize the number of lines to scroll in \"scrollUp\" and \"scrollDown\" bindings.",
-          "maximum": 999,
-          "minimum": 0,
           "type": [
             "integer",
             "string"
           ],
+          "description": "[Deprecated] This setting no longer has any effect. However, you can customize the number of lines to scroll using the \"rowsToScroll\" argument on the \"scrollUp\" and \"scrollDown\" actions.",
+          "default": "system",
+          "minimum": 0,
+          "maximum": 999,
           "deprecated": true
         },
         "minimizeToNotificationArea": {
@@ -2573,9 +2582,12 @@
           "$ref": "#/$defs/NewTabMenu"
         },
         "language": {
-          "default": "",
+          "type": [
+            "string",
+            "null"
+          ],
           "description": "Sets an override for the app's preferred language, expressed as a BCP-47 language tag like en-US.",
-          "type": "string"
+          "default": null
         },
         "theme": {
           "default": "dark",
@@ -2639,19 +2651,19 @@
           "type": "boolean"
         },
         "useTabSwitcher": {
+          "description": "[Deprecated] Replaced with the \"tabSwitcherMode\" setting.",
           "default": true,
-          "description": "Deprecated. Please use \"tabSwitcherMode\" instead.",
           "oneOf": [
             {
               "type": "boolean"
             },
             {
+              "type": "string",
               "enum": [
                 "mru",
                 "inOrder",
                 "disabled"
-              ],
-              "type": "string"
+              ]
             }
           ],
           "deprecated": true
@@ -2708,12 +2720,12 @@
       "type": "object",
       "properties": {
         "acrylicOpacity": {
+          "type": "number",
+          "description": "[Deprecated] Replaced with the \"opacity\" setting.",
           "default": 0.5,
-          "description": "[deprecated] Please use `opacity` instead.",
-          "deprecated": true,
-          "maximum": 1,
           "minimum": 0,
-          "type": "number"
+          "maximum": 1,
+          "deprecated": true
         },
         "antialiasingMode": {
           "default": "grayscale",
@@ -2739,6 +2751,11 @@
           "description": "When set to true, when opening a new tab or pane it will get reloaded environment variables.",
           "type": "boolean"
         },
+        "compatibility.input.forceVT": {
+          "default": false,
+          "description": "Force the terminal to use the legacy input encoding. Certain keys in some applications may stop working when enabling this setting.",
+          "type": "boolean"
+        },
         "compatibility.allowDECRQCRA": {
           "default": false,
           "description": "When set to true, the terminal will support the DECRQCRA (Request Checksum of Rectangular Area) escape sequence.",
@@ -2910,24 +2927,29 @@
           "type": "boolean"
         },
         "experimental.autoMarkPrompts": {
-          "deprecated": true,
-          "description": "This has been replaced by autoMarkPrompts in 1.21",
-          "type": "boolean"
+          "type": "boolean",
+          "description": "[Deprecated] Replaced with the \"autoMarkPrompts\" setting.",
+          "deprecated": true
         },
         "experimental.retroTerminalEffect": {
           "description": "When set to true, enable retro terminal effects. This is an experimental feature, and its continued existence is not guaranteed.",
           "type": "boolean"
         },
         "experimental.showMarksOnScrollbar": {
-          "deprecated": true,
-          "description": "This has been replaced by showMarksOnScrollbar in 1.21",
-          "type": "boolean"
+          "type": "boolean",
+          "description": "[Deprecated] Replaced with the \"showMarksOnScrollbar\" setting.",
+          "deprecated": true
         },
         "showMarksOnScrollbar": {
           "default": false,
           "description": "When set to true, marks added to the buffer via the addMark action will appear on the scrollbar.",
           "type": "boolean"
         },
+        "experimental.rainbowSuggestions": {
+          "type": "boolean",
+          "description": "Enables displaying command suggestions in the terminal in RGB (all the colors of the rainbow!).",
+          "default": false
+        },
         "experimental.rightClickContextMenu": {
           "default": false,
           "description": "When true, right-click shows a context menu; otherwise, it pastes from the clipboard or copies selection.",
@@ -2943,23 +2965,29 @@
           "type": "string"
         },
         "fontFace": {
-          "default": "Cascadia Mono",
-          "description": "[deprecated] Define 'face' within the 'font' object instead.",
           "type": "string",
+          "description": "[Deprecated] Replaced with the \"face\" setting within the \"font\" object.",
+          "default": "Cascadia Mono",
           "deprecated": true
         },
         "fontSize": {
-          "default": 12,
-          "description": "[deprecated] Define 'size' within the 'font' object instead.",
-          "minimum": 1,
           "type": "number",
+          "description": "[Deprecated] Replaced with the \"size\" setting within the \"font\" object.",
+          "default": 12,
+          "minimum": 1,
           "deprecated": true
         },
         "fontWeight": {
+          "description": "[Deprecated] Replaced with the \"weight\" setting within the \"font\" object.",
           "default": "normal",
-          "description": "[deprecated] Define 'weight' within the 'font' object instead.",
           "oneOf": [
             {
+              "type": "integer",
+              "minimum": 100,
+              "maximum": 990
+            },
+            {
+              "type": "string",
               "enum": [
                 "thin",
                 "extra-light",
@@ -2972,13 +3000,7 @@
                 "extra-bold",
                 "black",
                 "extra-black"
-              ],
-              "type": "string"
-            },
-            {
-              "maximum": 990,
-              "minimum": 100,
-              "type": "integer"
+              ]
             }
           ],
           "deprecated": true
@@ -3089,7 +3111,10 @@
         },
         "answerbackMessage": {
           "description": "The response that is sent when an ENQ control character is received.",
-          "type": "string"
+          "type": [
+            "string",
+            "null"
+          ]
         },
         "source": {
           "description": "Stores the name of the profile generator that originated this profile.",

doc/specs/#11000 - Marks/Shell-Integration-Marks.md

@@ -111,7 +111,7 @@ not understanding these sequences originally.
 The relevant FinalTerm sequences for marking up the prompt are as follows.
 
 
-![image](FTCS-diagram.png)
+![image](ftcs-diagram.png)
 
 * **FTCS_PROMPT**: `OSC 133 ; A ST`
   - The start of a prompt. Internally, this sets a marker in the buffer

doc/specs/#12424 - Auto-Save.md

@@ -0,0 +1,225 @@
+---
+author: Carlos Zamora @carlos-zamora
+created on: 2025-12-23
+last updated: 2025-12-23
+issue id: "#12424"
+---
+
+  
+
+# Auto-Save
+
+## Abstract
+This spec outlines a refactor primarily in the settings model project to enable auto-save. The current behavior and obstacles are outlined in the [[#Current Obstacles]] section. The most relevant behaviors include refreshing settings, querying settings data, and the settings editor UI. Overall, the main fundamental change to the settings model is that settings objects will now hold a reference to their pertinent `Json::Value`. When settings are queried or changed, the settings model objects will refer to and update (if necessary) their pertinent `Json::Value` data. For convenience, a `SettingKey` enum will be used to reference settings externally.
+
+With regards to refreshing settings, a `JsonManager` will be introduced to split some of the existing responsibilities of `CascadiaSettings`, specifically with regards to serialization. `SettingsLoader` will be pulled out into a separate class and file, and some or all functionality may be moved to `JsonManager`. `JsonManager` and `CascadiaSettings` will work together to load and update the JSON appropriately. Since settings model objects now hold a reference to their pertinent `Json::Value`, reloading the JSON should be fairly straightforward and the process or propagating changes to the rest of the app should remain largely unchanged.
+
+With regards to updating the settings editor architecture, the deserialization process will be mainly handled by the `JsonManager` to handle updating the pertinent `Json::Value` objects and writing the full JSON tree to the settings.json file. This will also handle creating a backup settings file and performing any conflict resolution, if necessary. This will be a separate stage of introducing auto-save as it builds on the previously mentioned changes.
+## Inspiration
+It's pretty standard across apps to automatically save changes to settings. Historically, Terminal started with settings being modifiable exclusively through the JSON file. Over time, a settings model and editor were implemented to allow for a UI to manage settings. Significant changes have occurred in this area including the addition of a view model to propagate changes to the settings model and X-Macros to group and access setting data throughout the codebase.
+
+## Current Obstacles
+There are a few main behaviors operating as obstacles for auto-save today:
+1. Refreshing Settings
+	- Current Behavior
+		- `AppLogic::_RegisterSettingsChange()` , as expected, registers a listener for whenever the settings.json changes. When that occurs,  the JSON is serialized into a `CascadiaSettings` settings model object (see `AppLogic::ReloadSettings()`-->`AppLogic::_TryLoadSettings()`-->`CascadiaSettings::LoadAll()`-->`CascadiaSettings(SettingsLoader)`).
+		- This settings model object tree is propagated throughout various parts of the `TerminalApp` project (and subsequently the `TerminalControl` project as well) . Specifically, a `SettingsChanged` event is raised and handled by...
+			- `AppHost::_HandleSettingsChanged()` for updating the minimize to notification area, auto-hide window, show tabs fullscreen, and some theming behaviors.
+			- `WindowEmperor` for updating global hotkeys, the OS notification area, and session persistence
+			- `TerminalWindow::UpdateSettings()`-->`TerminalPage::SetSettings()` for updating the rest of the settings and propagating them to the right spot
+		- `TerminalPage::_RefreshUIForSettingsReload()` is responsible for updating the settings for each `TerminalControl` and `Tab`.  `TerminalPage` creates a `TerminalSettingsCache` which lazily creates and updates a profile guid to `TerminalSettingsCreateResult` map. In `TerminalPage::_MakeTerminalPane()` and `TerminalPaneContent::UpdateSettings()`, `TerminalSettingsCache::TryLookup()` is called to do just that.
+		- `TermControl::UpdateControlSettings()` finally applies the output `TerminalSettingsPair` from the cache to the `TermControl`. 
+			- `TermControl::_UpdateSettingsFromUIThread()` and `TermControl::_UpdateAppearanceFromUIThread()` update several settings like background image, padding, scroll bar, etc.
+			- `ControlCore::UpdateSettings()` updates several settings like renderer changes and acrylic. The chain continues down to `Terminal::UpdateSettings()`.
+		- In all cases, the settings are applied by directly setting the class members.
+	- Critiques
+		- Upon refresh, the entire settings model object tree is recreated and used to replace the existing one. This is overkill when a single small setting was changed, and WinRT object construction is expensive.
+		- In setting the class members directly, some settings that may have changed at runtime (i.e. font size) get reset to the value set in the JSON!
+		- We don't actually know where a setting came from. This isn't strictly necessary, but it could be nice to have.
+		- We're not able to really iterate through settings. "Iteration" was achieved using x-macros.
+2. Querying Settings Data
+	- Current Behavior
+		- As mentioned above, the JSON is serialized into a `CascadiaSettings` settings model object which is the root of a tree of settings model objects that define how to query, manage, and modify settings.
+		- Settings are "inheritable", meaning that when they are queried, the value defined in the current layer is preferred over the parent's. For example, a profile setting for the PowerShell profile is resolved by checking the PowerShell profile configuration, then the profile defaults profile object, then the defaults.json profile defaults profile object, and finally the fallback value. Additional layers may exist for fragment extensions.
+		- In the settings model, this is handled via the `IInheritable<T>` interface which is implemented by `GlobalAppSettings`, `ActionMap`, `Profile`, `AppearanceConfig`, and `FontConfig`. This interface implements the functionality to reference parent objects to inherit from, create children objects that inherit from the current layer, and getters/setters for settings.
+	- Critiques
+		- The JSON is serialized to `Json::Value` objects using jsoncpp, which is then used to construct the settings model objects and actually store the relevant settings across different parts of the settings model tree. A settings model object ends up having no knowledge of the actual JSON relevant to it.
+		- The getters/setters for settings are written using several macros, which can be frustrating to debug through.
+		- The `IInheritable<T>` infrastructure provides no easy way to query what settings are set at any given layer.
+3. Settings Editor Architecture
+	- Current Behavior
+		- The settings editor operates by creating a deep copy of the settings model objects. Specifically, when the editor is first opened, a clone of the `CascadiaSettings` is created. As the user navigates the UI and makes changes, the changes are propagated through a view model layer to the cloned settings model objects. When the save button is pressed, the cloned settings model object is deserialized and written to the settings.json file, triggering a full refresh of the settings model throughout the terminal (see point 1 above).
+	- Critiques:
+		- The view model is responsible for propagating changes as needed to the settings model. This can be leveraged to avoid fully replacing the JSON with the cloned settings model. Ideally, we wouldn't even clone the settings model.
+
+Additionally, the team had discussed some ideas during December 2025's bug bash that are relevant to this area:
+- Inheritance objects can be stored to an array. That way, rather than referencing a parent object directly, we can use an index to point to the parent and quickly retrieve it.
+- `CascadiaSettings` is a very large and complex object separated across CascadiaSettings.cpp and CascadiaSettingsSerialization.cpp.
+- Iterating through the settings would be really nice. It would require storing the keys somewhere.
+- To support the idea of iterating through settings, the settings model could adopt a design pattern of returning `IInspectable` objects for queries. A string can be used to describe the type so that it could be cast appropriately.
+## Solution Design
+The obstacles listed above can be resolved with several changes made primarily in the settings model. Specifically, storing and querying the settings data will need to be the first set of changes (obstacle 2 above). Once those changes are made, consumers of the settings model can be updated to leverage the new APIs. Specifically, the architecture for refreshing settings (obstacle 1 above) and the settings editor (obstacle 3 above) will need to be updated to use the updated settings model architecture.
+
+### Settings Model changes
+With [MTSMSettings.h](https://github.com/microsoft/terminal/blob/main/src/cascadia/TerminalSettingsModel/MTSMSettings.h), we have the following setting metadata grouped together: stored type, setting name, setting JSON key, and default value. This can be leveraged to abstract different parts of our settings model fairly easily.
+
+There are several changes that can be made concurrently to the settings model:
+1. `Json::Value` storage and maintenance
+	- We can leverage [JsonUtils.h](https://github.com/microsoft/terminal/blob/main/src/cascadia/TerminalSettingsModel/JsonUtils.h) to read/write to the relevant JSON. In having each settings object store and maintain a `Json::Value`, the (de)serialization process is more straightforward and viewing the stored JSON simplifies debugging significantly as it becomes clear what settings are set at each layer.
+2. Use `SettingKey` enum to reference settings
+	- Rather than exposing an API for each setting, we can enumerate all settings for a settings model object using `enum SettingKey`. This greatly reduces the redundant code that we have for each setting. The resulting API can be simplified to `GetSetting()`, `SetSetting()`, `HasSetting()`, and `ClearSetting()` with each taking a `SettingKey` as a parameter.
+	- Admittedly, this does move a lot of the complexity over to the JSON boundary as we now have to perform type validation when (de)serializing the JSON. However, [JsonUtils.h](https://github.com/microsoft/terminal/blob/main/src/cascadia/TerminalSettingsModel/JsonUtils.h) provides `ConversionTrait` templated structs which are specifically designed to determine the behavior to convert to and from JSON. We can leverage these objects to do all the necessary work!
+	- This also allows us to very easily represent which settings are defined in a given layer. A `GetCurrentSettings()` API can return all `SettingKey`s that are defined in a given layer.
+3. Store all parents as a global list and refer to them by index
+	- Rather than storing pointer references to parent objects, we can simplify this relationship by maintaining a global `_parents` list. Children can store a `_parentIndex` member that simply points to the relevant parent in `_parents`.
+
+These changes do bring attention to the first golden rule:
+> **Golden Rule #1**: All setting types need a `ConversionTrait`
+
+Doing so defines strict rules for (de)serialization.
+
+The resulting settings objects will look something like this:
+```c++
+struct Profile : ProfileT<Profile>
+{
+	enum SettingKey
+	{
+		HistorySize,
+		SnapOnInput,
+		AltGrAliasing,
+		AnswerbackMessage,
+		//...
+		SETTINGS_SIZE// IMPORTANT: This MUST be the last value in this enum. It's an unused placeholder.
+	}
+	
+	// Retrieves the resolved value of a given setting
+	IInspectable GetSetting(SettingKey settingKey)
+	{
+		// get value from current layer, if possible
+		const auto jsonKey{ _GetJsonKey(settingKey) };
+		const auto converter{ _GetConverter(settingKey) };
+		if (_json.isMember(jsonKey) && converter.CanConvert(_json[jsonKey]))
+		{
+			return winrt::box_value(JsonUtils::GetValue(_json[jsonKey], converter));
+		}
+		
+		// ask parent, if available
+		if (_parentIndex)
+		{
+			return _parents[_parentIndex].GetSetting(settingKey);
+		}
+		
+		// default value
+		return _GetDefaultValue(settingKey);
+	}
+	
+	// Checks the current layer for a setting definition
+	bool HasSetting(SettingKey settingKey)
+	{
+		const auto jsonKey{ _jsonKeyMap[settingKey] };
+		const auto converter{ _GetConverter(settingKey) };
+		return _json.isMember(jsonKey) && converter.CanConvert(_json[jsonKey]);
+	}
+	
+	// Retrieves all setting keys that are defined in the current layer
+	IVector<SettingKey> CurrentSettings() const
+	{
+		std::vector<SettingKey> _currentSettings;
+		for (int i=0; i< static_cast<int>(SettingKey::SETTINGS_SIZE); i++)
+		{
+			const auto setting{ static_cast<SettingKey>(i) };
+			if (HasSetting(setting))
+			{
+				_currentSettings.add(setting);
+			}
+		}
+		return std::single_threaded_vector<SettingKey>(std::move(_currentSettings));
+	}
+	
+	// Updates the internal JSON setting with a new value
+	void SetSetting(SettingKey settingKey, IInspectable settingValGeneric)
+	{
+		const auto jsonKey{ _jsonKeyMap[settingKey] };
+		const auto converter{ _GetConverter(settingKey) };
+		
+		if (const auto settingValStrict{ settingValGeneric.try_as<decltype(converter)::type>() })
+		{
+			JsonUtils::SetValueForKey(_json, jsonKey, settingValStrict)
+			// Trigger JSON serialization process
+		}
+		else
+		{
+			// invalid type!
+			assert(false);
+		}
+	}
+
+private:
+	static std::vector<Model::Profile> _parents{};
+	std::optional<size_t> _parentIndex{};
+	Json::Value _json;
+	
+	til::static_map<SettingKey, std::string_view> _jsonKeyMap{
+		{ SettingKey::HistorySize, "historySize" },
+		{ SettingKey::SnapOnInput, "snapOnInput" },
+		//...
+	};
+	
+	// Implementation details have been omitted here for simplicity.
+	template<typename T>
+	JsonUtils::ConversionTrait<T> _GetConverter(SettingKey key);
+}
+```
+
+### Refreshing settings
+The process of refreshing settings was covered in [[#Current Obstacles]]. Now that settings model objects can store their relevant JSON, we don't need to completely reconstruct the settings model object tree. Instead, `AppLogic::ReloadSettings()` can trigger a new `ReloadSettings()` call on the existing `CascadiaSettings` object.
+
+`CascadiaSettings` already has a `SettingsLoader` object that is responsible for parsing the JSON and creating a simple `Json::Value` representation of the loaded settings (stored as `JsonSettings`). A lot of this infrastructure can be reused. When a `Json::Value` is determined for a settings model object (i.e. `Profile`), that settings model can trigger a new `ResetSettings(Json::Value)` function which simply sets the underlying `_json`.
+
+Given that one of the critiques is that `CascadiaSettings` is very large and complex, the json (de)serialization and management can be pulled out into its own class and files. Consider a new `JsonManager` class with the following division of responsibilities:
+- `CascadiaSettings`
+	- maintains ownership over the serialized settings model object tree (i.e. `GlobalAppSettings`, `Profile`, etc.)
+	- handles cascading changes (i.e. color scheme name changed, so all profiles referencing the color scheme need to be updated)
+	- capability to find matching settings model objects from parsed json:
+		- `Profile& FindMatchingProfile(Json::Value)` is specifically what comes to mind here. When the JSON is being loaded by the `JsonManager`, the settings editor and model will already have a `Profile` object that needs to be updated. This function (along with any other similar ones that may be needed) helps find the matching existing settings model object to avoid full reserialization.
+- `JsonManager`
+	- maintains ownership over the root of the `Json::Value` object tree
+	- stores parts of the `Json::Value` tree in the appropriate settings model objects in `CascadiaSettings` (or creates one if this is the first load). Much of this logic is already handled by `SettingsLoader` today.
+	- handles writing to the JSON file. This includes several implementation details such as creating backup json files, debouncing deserialization events, and conflict resolution between auto-save and json changes.
+
+Since all setting queries are resolved by checking the underlying JSON, the resolved values are updated at query-time. This means that once the entire settings model object tree is updated with the new underlying `Json::Value`s, we can continue with the rest of the refresh process as normal. Settings checked at the `AppHost`, `TerminalWindow`, and `TerminalPage` layers will query any relevant settings and retrieve the updated value. The components relying on `TerminalSettingsCreateResult` will also retrieve the updated values. Minor changes will be needed here to simply use the new `GetSetting()` accessor instead of the former ones (i.e. `CopyOnSelect()`).
+
+An earlier critique in this section was that in setting the class members directly, some settings that may have changed at runtime get reset to the value set in the JSON. In order to address this, a second golden rule must be established:
+> **Golden Rule #2**: Anything that can be set at runtime needs a member variable to track the runtime value override separately.
+
+This will be mostly important for appearance settings as those are the most jarring examples where refreshing settings change the app's state. Any changes made at runtime should be stored to member variables and, ideally, they should be stored as deltas over exact numbers. This will allow for changes to font size to still propagate, but on a different base font size.
+### Settings editor changes
+The process of editing settings was covered in [[#Current Obstacles]]. Fundamentally, in order to implement an auto-save experience, changes made in the settings editor must be applied to the settings model and propagated to the stored JSON. With the aforementioned changes, the settings model is more tightly coupled to the JSON which reduces the burden of updating the JSON. Additionally, any changes made to the JSON will result in a seamless refresh experience that doesn't modify existing runtime settings.
+
+A deep copy of the settings model objects is no longer needed. Instead, the settings editor can use the view model layer to propagate changes to the settings model. The new `SetSetting()` API will trigger the JSON serialization process. The settings model object will raise a `WriteSettings` event that will propagate up through `CascadiaSettings` to the `JsonManager`.
+
+Key changes to the deserialization process:
+- `JsonManager` will debounce bursts of `WriteSettings` events.
+- The full `Json::Value` tree will already exist, so deserialization should mainly use a `JsonWriter` to write the object tree to disk.
+- The settings will be written to `settings.json.tmp`. When that is done, `settings.json` will be backed up to `settings.json.bak` and `settings.json.tmp` will be renamed to `settings.json`. During this critical section, `JsonManager` (or `AppLogic` depending on where the file change listener is located) will temporarily stop listening to file change events.
+- With regards to conflict resolution, the disk will always be considered the source of truth. Any pending auto-save will be cancelled in the event that an edit is detected.
+- After a write operation is complete, the file change listener must be enabled again and a refresh of the settings must be initiated. The settings refresh will simply reload settings queries as described in [[#Current Obstacles]] by recreating the `TerminalSettingsCreateResult` map and performing other miscellaneous work at the `TerminalWindow` and `TerminalPage` layers.
+## Capabilities
+### Accessibility
+N/A
+### Security
+The deserialization process already writes a hash dependent on the last time the file was written to. It's important that this behavior is maintained.
+### Reliability
+The `ConversionTrait` objects and `JsonManager` will ensure that only valid JSON is written to the settings file. Regardless, a backup `settings.json` file will exist to gracefully handle any unexpected issues with conflict resolution.
+### Compatibility
+N/A
+### Performance, Power, and Efficiency
+Since the entire settings model object tree won't be reconstructed on a settings reload, there should be a reduction in memory usage and an improved performance.
+## Potential Issues
+Some settings that allow runtime overrides may be set across multiple sources. Tab color, for example, can be set by a profile, at runtime, via the commandline, and using `DECAC`. It's important that this behavior is maintained.
+
+Font size changes should also be preserved. However, rather than storing the final font size when it is changed at runtime, a delta should be stored. This way, when a font size is reloaded, the runtime changes are still applied relative to the base font size, rather than replacing it entirely.
+## Future considerations
+None
+## Resources
+None

scratch/ScratchIslandApp/Package/Resources/uk-UA/Resources.resw

@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="AppDescription" xml:space="preserve">
+    <value>Скретч-додаток для тестів XAML Islands</value>
+  </data>
+</root>

scratch/ScratchIslandApp/SampleApp/Resources/uk-UA/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

scratch/ScratchIslandApp/SampleApp/packages.config

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
-  <package id="Microsoft.Windows.CppWinRT" version="2.0.230207.1" targetFramework="native" />
+  <package id="Microsoft.Windows.CppWinRT" version="2.0.250303.1" targetFramework="native" />
   <package id="Microsoft.UI.Xaml" version="2.8.4" targetFramework="native" />
   <package id="Microsoft.Web.WebView2" version="1.0.1661.34" targetFramework="native" />
 </packages>

scratch/ScratchIslandApp/WindowExe/packages.config

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
-  <package id="Microsoft.Windows.CppWinRT" version="2.0.230207.1" targetFramework="native" />
+  <package id="Microsoft.Windows.CppWinRT" version="2.0.250303.1" targetFramework="native" />
   <package id="Microsoft.UI.Xaml" version="2.8.4" targetFramework="native" />
   <package id="Microsoft.Web.WebView2" version="1.0.1661.34" targetFramework="native" />
 </packages>

src/buffer/out/Row.cpp

@@ -942,12 +942,12 @@ void ROW::_resizeChars(uint16_t colEndDirty, uint16_t chBegDirty, size_t chEndDi
     }
 }
 
-til::small_rle<TextAttribute, uint16_t, 1>& ROW::Attributes() noexcept
+RowAttributes& ROW::Attributes() noexcept
 {
     return _attr;
 }
 
-const til::small_rle<TextAttribute, uint16_t, 1>& ROW::Attributes() const noexcept
+const RowAttributes& ROW::Attributes() const noexcept
 {
     return _attr;
 }

src/buffer/out/Row.hpp

@@ -14,6 +14,11 @@
 class ROW;
 class TextBuffer;
 
+// Because MarkKind::Output gets set only on the actually written text,
+// most rows will end up having at least 2 runs: The start of the line
+// with MarkKind::Output and the rest of the line with MarkKind::None.
+using RowAttributes = til::small_rle<TextAttribute, uint16_t, 2>;
+
 enum class DelimiterClass
 {
     ControlChar,
@@ -149,8 +154,8 @@ public:
     void ReplaceText(RowWriteState& state);
     void CopyTextFrom(RowCopyTextFromState& state);
 
-    til::small_rle<TextAttribute, uint16_t, 1>& Attributes() noexcept;
-    const til::small_rle<TextAttribute, uint16_t, 1>& Attributes() const noexcept;
+    RowAttributes& Attributes() noexcept;
+    const RowAttributes& Attributes() const noexcept;
     TextAttribute GetAttrByColumn(til::CoordType column) const;
     std::vector<uint16_t> GetHyperlinks() const;
     ImageSlice* SetImageSlice(ImageSlice::Pointer imageSlice) noexcept;
@@ -298,7 +303,7 @@ private:
     std::span<uint16_t> _charOffsets;
     // _attr is a run-length-encoded vector of TextAttribute with a decompressed
     // length equal to _columnCount (= 1 TextAttribute per column).
-    til::small_rle<TextAttribute, uint16_t, 1> _attr;
+    RowAttributes _attr;
     // The width of the row in visual columns.
     uint16_t _columnCount = 0;
     // Stores double-width/height (DECSWL/DECDWL/DECDHL) attributes.

src/buffer/out/cursor.cpp

@@ -13,46 +13,28 @@
 // - ulSize - The height of the cursor within this buffer
 Cursor::Cursor(const ULONG ulSize, TextBuffer& parentBuffer) noexcept :
     _parentBuffer{ parentBuffer },
-    _fHasMoved(false),
-    _fIsVisible(true),
-    _fIsOn(true),
-    _fIsDouble(false),
-    _fBlinkingAllowed(true),
-    _fDelay(false),
-    _fIsConversionArea(false),
-    _fDelayedEolWrap(false),
-    _fDeferCursorRedraw(false),
-    _fHaveDeferredCursorRedraw(false),
-    _ulSize(ulSize),
-    _cursorType(CursorType::Legacy)
+    _ulSize(ulSize)
 {
 }
 
-Cursor::~Cursor() = default;
-
 til::point Cursor::GetPosition() const noexcept
 {
     return _cPosition;
 }
 
-bool Cursor::HasMoved() const noexcept
+uint64_t Cursor::GetLastMutationId() const noexcept
 {
-    return _fHasMoved;
+    return _mutationId;
 }
 
 bool Cursor::IsVisible() const noexcept
 {
-    return _fIsVisible;
+    return _isVisible;
 }
 
-bool Cursor::IsOn() const noexcept
+bool Cursor::IsBlinking() const noexcept
 {
-    return _fIsOn;
-}
-
-bool Cursor::IsBlinkingAllowed() const noexcept
-{
-    return _fBlinkingAllowed;
+    return _isBlinking;
 }
 
 bool Cursor::IsDouble() const noexcept
@@ -60,178 +42,128 @@ bool Cursor::IsDouble() const noexcept
     return _fIsDouble;
 }
 
-bool Cursor::IsConversionArea() const noexcept
-{
-    return _fIsConversionArea;
-}
-
-bool Cursor::GetDelay() const noexcept
-{
-    return _fDelay;
-}
-
 ULONG Cursor::GetSize() const noexcept
 {
     return _ulSize;
 }
 
-void Cursor::SetHasMoved(const bool fHasMoved) noexcept
+void Cursor::SetIsVisible(bool enable) noexcept
 {
-    _fHasMoved = fHasMoved;
+    if (_isVisible != enable)
+    {
+        _isVisible = enable;
+        _redrawIfVisible();
+    }
 }
 
-void Cursor::SetIsVisible(const bool fIsVisible) noexcept
+void Cursor::SetIsBlinking(bool enable) noexcept
 {
-    _fIsVisible = fIsVisible;
-    _RedrawCursor();
-}
-
-void Cursor::SetIsOn(const bool fIsOn) noexcept
-{
-    _fIsOn = fIsOn;
-    _RedrawCursorAlways();
-}
-
-void Cursor::SetBlinkingAllowed(const bool fBlinkingAllowed) noexcept
-{
-    _fBlinkingAllowed = fBlinkingAllowed;
-    // GH#2642 - From what we've gathered from other terminals, when blinking is
-    // disabled, the cursor should remain On always, and have the visibility
-    // controlled by the IsVisible property. So when you do a printf "\e[?12l"
-    // to disable blinking, the cursor stays stuck On. At this point, only the
-    // cursor visibility property controls whether the user can see it or not.
-    // (Yes, the cursor can be On and NOT Visible)
-    _fIsOn = true;
-    _RedrawCursorAlways();
+    if (_isBlinking != enable)
+    {
+        _isBlinking = enable;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::SetIsDouble(const bool fIsDouble) noexcept
 {
-    _fIsDouble = fIsDouble;
-    _RedrawCursor();
-}
-
-void Cursor::SetIsConversionArea(const bool fIsConversionArea) noexcept
-{
-    // Functionally the same as "Hide cursor"
-    // Never called with TRUE, it's only used in the creation of a
-    //      ConversionAreaInfo, and never changed after that.
-    _fIsConversionArea = fIsConversionArea;
-    _RedrawCursorAlways();
-}
-
-void Cursor::SetDelay(const bool fDelay) noexcept
-{
-    _fDelay = fDelay;
+    if (_fIsDouble != fIsDouble)
+    {
+        _fIsDouble = fIsDouble;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::SetSize(const ULONG ulSize) noexcept
 {
-    _ulSize = ulSize;
-    _RedrawCursor();
+    if (_ulSize != ulSize)
+    {
+        _ulSize = ulSize;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::SetStyle(const ULONG ulSize, const CursorType type) noexcept
 {
-    _ulSize = ulSize;
-    _cursorType = type;
-
-    _RedrawCursor();
-}
-
-// Routine Description:
-// - Sends a redraw message to the renderer only if the cursor is currently on.
-// - NOTE: For use with most methods in this class.
-// Arguments:
-// - <none>
-// Return Value:
-// - <none>
-void Cursor::_RedrawCursor() noexcept
-{
-    // Only trigger the redraw if we're on.
-    // Don't draw the cursor if this was triggered from a conversion area.
-    // (Conversion areas have cursors to mark the insertion point internally, but the user's actual cursor is the one on the primary screen buffer.)
-    if (IsOn() && !IsConversionArea())
+    if (_ulSize != ulSize || _cursorType != type)
     {
-        if (_fDeferCursorRedraw)
-        {
-            _fHaveDeferredCursorRedraw = true;
-        }
-        else
-        {
-            _RedrawCursorAlways();
-        }
+        _ulSize = ulSize;
+        _cursorType = type;
+        _redrawIfVisible();
     }
 }
 
-// Routine Description:
-// - Sends a redraw message to the renderer no matter what.
-// - NOTE: For use with the method that turns the cursor on and off to force a refresh
-//         and clear the ON cursor from the screen. Not for use with other methods.
-//         They should use the other method so refreshes are suppressed while the cursor is off.
-// Arguments:
-// - <none>
-// Return Value:
-// - <none>
-void Cursor::_RedrawCursorAlways() noexcept
-{
-    _parentBuffer.NotifyPaintFrame();
-}
-
 void Cursor::SetPosition(const til::point cPosition) noexcept
 {
-    _RedrawCursor();
-    _cPosition = cPosition;
-    _RedrawCursor();
+    // The VT code assumes that moving the cursor implicitly resets the delayed EOL wrap,
+    // so we call ResetDelayEOLWrap() independent of _cPosition != cPosition.
+    // You can see the effect of this with "`e[1;9999Ha`e[1;9999Hb", which should print just "b".
     ResetDelayEOLWrap();
+    if (_cPosition != cPosition)
+    {
+        _cPosition = cPosition;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::SetXPosition(const til::CoordType NewX) noexcept
 {
-    _RedrawCursor();
-    _cPosition.x = NewX;
-    _RedrawCursor();
     ResetDelayEOLWrap();
+    if (_cPosition.x != NewX)
+    {
+        _cPosition.x = NewX;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::SetYPosition(const til::CoordType NewY) noexcept
 {
-    _RedrawCursor();
-    _cPosition.y = NewY;
-    _RedrawCursor();
     ResetDelayEOLWrap();
+    if (_cPosition.y != NewY)
+    {
+        _cPosition.y = NewY;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::IncrementXPosition(const til::CoordType DeltaX) noexcept
 {
-    _RedrawCursor();
-    _cPosition.x += DeltaX;
-    _RedrawCursor();
     ResetDelayEOLWrap();
+    if (DeltaX != 0)
+    {
+        _cPosition.x = _cPosition.x + DeltaX;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::IncrementYPosition(const til::CoordType DeltaY) noexcept
 {
-    _RedrawCursor();
-    _cPosition.y += DeltaY;
-    _RedrawCursor();
     ResetDelayEOLWrap();
+    if (DeltaY != 0)
+    {
+        _cPosition.y = _cPosition.y + DeltaY;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::DecrementXPosition(const til::CoordType DeltaX) noexcept
 {
-    _RedrawCursor();
-    _cPosition.x -= DeltaX;
-    _RedrawCursor();
     ResetDelayEOLWrap();
+    if (DeltaX != 0)
+    {
+        _cPosition.x = _cPosition.x - DeltaX;
+        _redrawIfVisible();
+    }
 }
 
 void Cursor::DecrementYPosition(const til::CoordType DeltaY) noexcept
 {
-    _RedrawCursor();
-    _cPosition.y -= DeltaY;
-    _RedrawCursor();
     ResetDelayEOLWrap();
+    if (DeltaY != 0)
+    {
+        _cPosition.y = _cPosition.y - DeltaY;
+        _redrawIfVisible();
+    }
 }
 
 ///////////////////////////////////////////////////////////////////////////////
@@ -244,74 +176,33 @@ void Cursor::DecrementYPosition(const til::CoordType DeltaY) noexcept
 // - OtherCursor - The cursor to copy properties from
 // Return Value:
 // - <none>
-void Cursor::CopyProperties(const Cursor& OtherCursor) noexcept
+void Cursor::CopyProperties(const Cursor& other) noexcept
 {
-    // We shouldn't copy the position as it will be already rearranged by the resize operation.
-    //_cPosition                    = pOtherCursor->_cPosition;
-
-    _fHasMoved = OtherCursor._fHasMoved;
-    _fIsVisible = OtherCursor._fIsVisible;
-    _fIsOn = OtherCursor._fIsOn;
-    _fIsDouble = OtherCursor._fIsDouble;
-    _fBlinkingAllowed = OtherCursor._fBlinkingAllowed;
-    _fDelay = OtherCursor._fDelay;
-    _fIsConversionArea = OtherCursor._fIsConversionArea;
-
-    // A resize operation should invalidate the delayed end of line status, so do not copy.
-    //_fDelayedEolWrap              = OtherCursor._fDelayedEolWrap;
-    //_coordDelayedAt               = OtherCursor._coordDelayedAt;
-
-    _fDeferCursorRedraw = OtherCursor._fDeferCursorRedraw;
-    _fHaveDeferredCursorRedraw = OtherCursor._fHaveDeferredCursorRedraw;
-
-    // Size will be handled separately in the resize operation.
-    //_ulSize                       = OtherCursor._ulSize;
-    _cursorType = OtherCursor._cursorType;
+    _cPosition = other._cPosition;
+    _coordDelayedAt = other._coordDelayedAt;
+    _ulSize = other._ulSize;
+    _cursorType = other._cursorType;
+    _isVisible = other._isVisible;
+    _isBlinking = other._isBlinking;
+    _fIsDouble = other._fIsDouble;
 }
 
 void Cursor::DelayEOLWrap() noexcept
 {
     _coordDelayedAt = _cPosition;
-    _fDelayedEolWrap = true;
 }
 
 void Cursor::ResetDelayEOLWrap() noexcept
 {
-    _coordDelayedAt = {};
-    _fDelayedEolWrap = false;
+    _coordDelayedAt.reset();
 }
 
-til::point Cursor::GetDelayedAtPosition() const noexcept
+const std::optional<til::point>& Cursor::GetDelayEOLWrap() const noexcept
 {
     return _coordDelayedAt;
 }
 
-bool Cursor::IsDelayedEOLWrap() const noexcept
-{
-    return _fDelayedEolWrap;
-}
-
-void Cursor::StartDeferDrawing() noexcept
-{
-    _fDeferCursorRedraw = true;
-}
-
-bool Cursor::IsDeferDrawing() noexcept
-{
-    return _fDeferCursorRedraw;
-}
-
-void Cursor::EndDeferDrawing() noexcept
-{
-    if (_fHaveDeferredCursorRedraw)
-    {
-        _RedrawCursorAlways();
-    }
-
-    _fDeferCursorRedraw = FALSE;
-}
-
-const CursorType Cursor::GetType() const noexcept
+CursorType Cursor::GetType() const noexcept
 {
     return _cursorType;
 }
@@ -320,3 +211,18 @@ void Cursor::SetType(const CursorType type) noexcept
 {
     _cursorType = type;
 }
+
+void Cursor::_redrawIfVisible() noexcept
+{
+    _mutationId++;
+    if (_isVisible)
+    {
+        _parentBuffer.NotifyPaintFrame();
+    }
+}
+
+void Cursor::_redraw() noexcept
+{
+    _mutationId++;
+    _parentBuffer.NotifyPaintFrame();
+}

src/buffer/out/cursor.h

@@ -29,8 +29,6 @@ public:
 
     Cursor(const ULONG ulSize, TextBuffer& parentBuffer) noexcept;
 
-    ~Cursor();
-
     // No Copy. It will copy the timer handle. Bad news.
     Cursor(const Cursor&) = delete;
     Cursor& operator=(const Cursor&) & = delete;
@@ -38,29 +36,17 @@ public:
     Cursor(Cursor&&) = default;
     Cursor& operator=(Cursor&&) & = delete;
 
-    bool HasMoved() const noexcept;
+    uint64_t GetLastMutationId() const noexcept;
     bool IsVisible() const noexcept;
-    bool IsOn() const noexcept;
-    bool IsBlinkingAllowed() const noexcept;
+    bool IsBlinking() const noexcept;
     bool IsDouble() const noexcept;
-    bool IsConversionArea() const noexcept;
-    bool GetDelay() const noexcept;
     ULONG GetSize() const noexcept;
     til::point GetPosition() const noexcept;
+    CursorType GetType() const noexcept;
 
-    const CursorType GetType() const noexcept;
-
-    void StartDeferDrawing() noexcept;
-    bool IsDeferDrawing() noexcept;
-    void EndDeferDrawing() noexcept;
-
-    void SetHasMoved(const bool fHasMoved) noexcept;
-    void SetIsVisible(const bool fIsVisible) noexcept;
-    void SetIsOn(const bool fIsOn) noexcept;
-    void SetBlinkingAllowed(const bool fIsOn) noexcept;
+    void SetIsVisible(bool enable) noexcept;
+    void SetIsBlinking(bool enable) noexcept;
     void SetIsDouble(const bool fIsDouble) noexcept;
-    void SetIsConversionArea(const bool fIsConversionArea) noexcept;
-    void SetDelay(const bool fDelay) noexcept;
     void SetSize(const ULONG ulSize) noexcept;
     void SetStyle(const ULONG ulSize, const CursorType type) noexcept;
 
@@ -72,42 +58,30 @@ public:
     void DecrementXPosition(const til::CoordType DeltaX) noexcept;
     void DecrementYPosition(const til::CoordType DeltaY) noexcept;
 
-    void CopyProperties(const Cursor& OtherCursor) noexcept;
+    void CopyProperties(const Cursor& other) noexcept;
 
     void DelayEOLWrap() noexcept;
     void ResetDelayEOLWrap() noexcept;
-    til::point GetDelayedAtPosition() const noexcept;
-    bool IsDelayedEOLWrap() const noexcept;
+    const std::optional<til::point>& GetDelayEOLWrap() const noexcept;
 
     void SetType(const CursorType type) noexcept;
 
 private:
+    void _redrawIfVisible() noexcept;
+    void _redraw() noexcept;
+
     TextBuffer& _parentBuffer;
 
     //TODO: separate the rendering and text placement
 
     // NOTE: If you are adding a property here, go add it to CopyProperties.
 
+    uint64_t _mutationId = 0;
     til::point _cPosition; // current position on screen (in screen buffer coords).
-
-    bool _fHasMoved;
-    bool _fIsVisible; // whether cursor is visible (set only through the API)
-    bool _fIsOn; // whether blinking cursor is on or not
-    bool _fIsDouble; // whether the cursor size should be doubled
-    bool _fBlinkingAllowed; //Whether or not the cursor is allowed to blink at all. only set through VT (^[[?12h/l)
-    bool _fDelay; // don't blink scursor on next timer message
-    bool _fIsConversionArea; // is attached to a conversion area so it doesn't actually need to display the cursor.
-
-    bool _fDelayedEolWrap; // don't wrap at EOL till the next char comes in.
-    til::point _coordDelayedAt; // coordinate the EOL wrap was delayed at.
-
-    bool _fDeferCursorRedraw; // whether we should defer redrawing the cursor or not
-    bool _fHaveDeferredCursorRedraw; // have we been asked to redraw the cursor while it was being deferred?
-
+    std::optional<til::point> _coordDelayedAt; // coordinate the EOL wrap was delayed at.
     ULONG _ulSize;
-
-    void _RedrawCursor() noexcept;
-    void _RedrawCursorAlways() noexcept;
-
-    CursorType _cursorType;
+    CursorType _cursorType = CursorType::Legacy;
+    bool _isVisible = true;
+    bool _isBlinking = true;
+    bool _fIsDouble = false; // whether the cursor size should be doubled
 };

src/buffer/out/textBuffer.cpp

@@ -2628,11 +2628,8 @@ void TextBuffer::_AppendRTFText(std::string& contentBuilder, const std::wstring_
     }
 }
 
-void TextBuffer::SerializeToPath(const wchar_t* destination) const
+void TextBuffer::SerializeTo(HANDLE handle) const
 {
-    const wil::unique_handle file{ CreateFileW(destination, GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_DELETE, nullptr, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, nullptr) };
-    THROW_LAST_ERROR_IF(!file);
-
     static constexpr size_t writeThreshold = 32 * 1024;
     std::wstring buffer;
     buffer.reserve(writeThreshold + writeThreshold / 2);
@@ -2661,7 +2658,7 @@ void TextBuffer::SerializeToPath(const wchar_t* destination) const
         {
             const auto fileSize = gsl::narrow<DWORD>(buffer.size() * sizeof(wchar_t));
             DWORD bytesWritten = 0;
-            THROW_IF_WIN32_BOOL_FALSE(WriteFile(file.get(), buffer.data(), fileSize, &bytesWritten, nullptr));
+            THROW_IF_WIN32_BOOL_FALSE(WriteFile(handle, buffer.data(), fileSize, &bytesWritten, nullptr));
             THROW_WIN32_IF_MSG(ERROR_WRITE_FAULT, bytesWritten != fileSize, "failed to write");
             buffer.clear();
         }

src/buffer/out/textBuffer.hpp

@@ -288,7 +288,7 @@ public:
                        const bool isIntenseBold,
                        std::function<std::tuple<COLORREF, COLORREF, COLORREF>(const TextAttribute&)> GetAttributeColors) const noexcept;
 
-    void SerializeToPath(const wchar_t* destination) const;
+    void SerializeTo(HANDLE handle) const;
 
     struct PositionInformation
     {

src/cascadia/CascadiaPackage/CascadiaPackage.wapproj

@@ -77,9 +77,6 @@
     <ProjectReference Include="$(OpenConsoleDir)src\cascadia\WindowsTerminal\WindowsTerminal.vcxproj">
       <Project>{CA5CAD1A-1754-4A9D-93D7-857A9D17CB1B}</Project>
     </ProjectReference>
-    <ProjectReference Include="$(OpenConsoleDir)src\cascadia\TerminalAzBridge\TerminalAzBridge.vcxproj">
-      <Project>{067F0A06-FCB7-472C-96E9-B03B54E8E18D}</Project>
-    </ProjectReference>
     <ProjectReference Include="$(OpenConsoleDir)src\cascadia\ShellExtension\WindowsTerminalShellExt.vcxproj">
       <Project>{f2ed628a-db22-446f-a081-4cc845b51a2b}</Project>
     </ProjectReference>

src/cascadia/LocalTests_TerminalApp/FilteredCommandTests.cpp

@@ -21,6 +21,7 @@ namespace TerminalAppLocalTests
             _value{ value } {}
 
         winrt::hstring Name() { return _value; }
+        winrt::hstring Subtitle() { return {}; }
         winrt::hstring KeyChordText() { return {}; }
         winrt::hstring Icon() { return {}; }
 

src/cascadia/LocalTests_TerminalApp/SettingsTests.cpp

@@ -5,12 +5,14 @@
 
 #include "../TerminalApp/TerminalPage.h"
 #include "../UnitTests_SettingsModel/TestUtils.h"
+#include "../TerminalSettingsAppAdapterLib/TerminalSettings.h"
 
 using namespace Microsoft::Console;
 using namespace WEX::Logging;
 using namespace WEX::TestExecution;
 using namespace WEX::Common;
 using namespace winrt::TerminalApp;
+using namespace winrt::Microsoft::Terminal::Settings;
 using namespace winrt::Microsoft::Terminal::Settings::Model;
 using namespace winrt::Microsoft::Terminal::Control;
 
@@ -1419,10 +1421,10 @@ namespace TerminalAppLocalTests
             VERIFY_ARE_EQUAL(L"profile0", terminalArgs.Profile());
             VERIFY_IS_NULL(terminalArgs.Elevate());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"cmd.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(false, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"cmd.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(false, termSettings->Elevate());
         }
         {
             Log::Comment(L"profile.elevate=true, action.elevate=nullopt: DO auto elevate");
@@ -1442,10 +1444,10 @@ namespace TerminalAppLocalTests
             VERIFY_ARE_EQUAL(L"profile1", terminalArgs.Profile());
             VERIFY_IS_NULL(terminalArgs.Elevate());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"pwsh.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(true, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"pwsh.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(true, termSettings->Elevate());
         }
         {
             Log::Comment(L"profile.elevate=false, action.elevate=nullopt: don't auto elevate");
@@ -1465,10 +1467,10 @@ namespace TerminalAppLocalTests
             VERIFY_ARE_EQUAL(L"profile2", terminalArgs.Profile());
             VERIFY_IS_NULL(terminalArgs.Elevate());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"wsl.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(false, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"wsl.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(false, termSettings->Elevate());
         }
 
         {
@@ -1490,10 +1492,10 @@ namespace TerminalAppLocalTests
             VERIFY_IS_NOT_NULL(terminalArgs.Elevate());
             VERIFY_IS_FALSE(terminalArgs.Elevate().Value());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"cmd.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(false, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"cmd.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(false, termSettings->Elevate());
         }
         {
             Log::Comment(L"profile.elevate=true, action.elevate=false: don't auto elevate");
@@ -1514,10 +1516,10 @@ namespace TerminalAppLocalTests
             VERIFY_IS_NOT_NULL(terminalArgs.Elevate());
             VERIFY_IS_FALSE(terminalArgs.Elevate().Value());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"pwsh.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(false, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"pwsh.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(false, termSettings->Elevate());
         }
         {
             Log::Comment(L"profile.elevate=false, action.elevate=false: don't auto elevate");
@@ -1538,10 +1540,10 @@ namespace TerminalAppLocalTests
             VERIFY_IS_NOT_NULL(terminalArgs.Elevate());
             VERIFY_IS_FALSE(terminalArgs.Elevate().Value());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"wsl.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(false, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"wsl.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(false, termSettings->Elevate());
         }
 
         {
@@ -1563,10 +1565,10 @@ namespace TerminalAppLocalTests
             VERIFY_IS_NOT_NULL(terminalArgs.Elevate());
             VERIFY_IS_TRUE(terminalArgs.Elevate().Value());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"cmd.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(true, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"cmd.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(true, termSettings->Elevate());
         }
         {
             Log::Comment(L"profile.elevate=true, action.elevate=true: DO auto elevate");
@@ -1586,10 +1588,10 @@ namespace TerminalAppLocalTests
             VERIFY_IS_NOT_NULL(terminalArgs.Elevate());
             VERIFY_IS_TRUE(terminalArgs.Elevate().Value());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"pwsh.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(true, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"pwsh.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(true, termSettings->Elevate());
         }
         {
             Log::Comment(L"profile.elevate=false, action.elevate=true: DO auto elevate");
@@ -1610,10 +1612,10 @@ namespace TerminalAppLocalTests
             VERIFY_IS_NOT_NULL(terminalArgs.Elevate());
             VERIFY_IS_TRUE(terminalArgs.Elevate().Value());
 
-            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs, nullptr);
+            const auto termSettingsResult = TerminalSettings::CreateWithNewTerminalArgs(settings, terminalArgs);
             const auto termSettings = termSettingsResult.DefaultSettings();
-            VERIFY_ARE_EQUAL(L"wsl.exe", termSettings.Commandline());
-            VERIFY_ARE_EQUAL(true, termSettings.Elevate());
+            VERIFY_ARE_EQUAL(L"wsl.exe", termSettings->Commandline());
+            VERIFY_ARE_EQUAL(true, termSettings->Elevate());
         }
     }
 

src/cascadia/LocalTests_TerminalApp/TabTests.cpp

@@ -66,7 +66,6 @@ namespace TerminalAppLocalTests
         // can help you identify if something much lower in the stack has
         // failed.
         TEST_METHOD(EnsureTestsActivate);
-        TEST_METHOD(TryCreateSettingsType);
         TEST_METHOD(TryCreateConnectionType);
         TEST_METHOD(TryCreateXamlObjects);
 
@@ -131,23 +130,12 @@ namespace TerminalAppLocalTests
         VERIFY_IS_TRUE(true);
     }
 
-    void TabTests::TryCreateSettingsType()
-    {
-        // Verify we can create a WinRT type we authored
-        // Just creating it is enough to know that everything is working.
-        TerminalSettings settings;
-        VERIFY_IS_NOT_NULL(settings);
-    }
-
     void TabTests::TryCreateConnectionType()
     {
         // Verify we can create a WinRT type we authored
         // Just creating it is enough to know that everything is working.
         winrt::Microsoft::Terminal::TerminalConnection::EchoConnection conn{};
         VERIFY_IS_NOT_NULL(conn);
-        // We're doing this test separately from the TryCreateSettingsType test,
-        // to ensure both dependent binaries (TerminalSettings and
-        // TerminalConnection) both work individually.
     }
 
     void TabTests::TryCreateXamlObjects()
@@ -359,6 +347,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::TryDuplicateBadTab()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         // * Create a tab with a profile with GUID 1
         // * Reload the settings so that GUID 1 is no longer in the list of profiles
         // * Try calling _DuplicateFocusedTab on tab 1
@@ -446,6 +438,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::TryDuplicateBadPane()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         // * Create a tab with a profile with GUID 1
         // * Reload the settings so that GUID 1 is no longer in the list of profiles
         // * Try calling _SplitPane(Duplicate) on tab 1
@@ -697,6 +693,7 @@ namespace TerminalAppLocalTests
     {
         BEGIN_TEST_METHOD_PROPERTIES()
             TEST_METHOD_PROPERTY(L"IsolationLevel", L"Method")
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
         END_TEST_METHOD_PROPERTIES()
 
         auto page = _commonSetup();
@@ -736,6 +733,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::MoveFocusFromZoomedPane()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         auto page = _commonSetup();
 
         Log::Comment(L"Create a second pane");
@@ -781,6 +782,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::CloseZoomedPane()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         auto page = _commonSetup();
 
         Log::Comment(L"Create a second pane");
@@ -836,6 +841,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::SwapPanes()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         auto page = _commonSetup();
 
         Log::Comment(L"Setup 4 panes.");
@@ -1042,6 +1051,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::NextMRUTab()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         // This is a test for GH#8025 - we want to make sure that we can do both
         // in-order and MRU tab traversal, using the tab switcher and with the
         // tab switcher disabled.
@@ -1158,6 +1171,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::VerifyCommandPaletteTabSwitcherOrder()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         // This is a test for GH#8188 - we want to make sure that the order of tabs
         // is preserved in the CommandPalette's TabSwitcher
 
@@ -1253,6 +1270,7 @@ namespace TerminalAppLocalTests
     {
         BEGIN_TEST_METHOD_PROPERTIES()
             TEST_METHOD_PROPERTY(L"IsolationLevel", L"Method")
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
         END_TEST_METHOD_PROPERTIES()
 
         auto page = _commonSetup();
@@ -1285,6 +1303,7 @@ namespace TerminalAppLocalTests
     {
         BEGIN_TEST_METHOD_PROPERTIES()
             TEST_METHOD_PROPERTY(L"IsolationLevel", L"Method")
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
         END_TEST_METHOD_PROPERTIES()
 
         auto page = _commonSetup();
@@ -1306,21 +1325,32 @@ namespace TerminalAppLocalTests
         });
     }
 
+    static til::color _getControlBackgroundColor(winrt::TerminalApp::implementation::ContentManager* contentManager,
+                                                 const winrt::Microsoft::Terminal::Control::TermControl& c)
+    {
+        auto interactivity{ contentManager->TryLookupCore(c.ContentId()) };
+        VERIFY_IS_NOT_NULL(interactivity);
+        const auto core{ interactivity.Core() };
+        return til::color{ core.BackgroundColor() };
+    }
+
     void TabTests::TestPreviewCommitScheme()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         Log::Comment(L"Preview a color scheme. Make sure it's applied, then committed accordingly");
 
         auto page = _commonSetup();
         VERIFY_IS_NOT_NULL(page);
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
-            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, backgroundColor);
         });
 
         TestOnUIThread([&page]() {
@@ -1330,15 +1360,13 @@ namespace TerminalAppLocalTests
             page->_PreviewAction(actionAndArgs);
         });
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
             Log::Comment(L"Color should be changed to the preview");
-            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, backgroundColor);
 
             // And we should have stored a function to revert the change.
             VERIFY_ARE_EQUAL(1u, page->_restorePreviewFuncs.size());
@@ -1352,15 +1380,13 @@ namespace TerminalAppLocalTests
             page->_HandleSetColorScheme(nullptr, ActionEventArgs{ args });
         });
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
             Log::Comment(L"Color should be changed");
-            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, backgroundColor);
 
             // After preview there should be no more restore functions to execute.
             VERIFY_ARE_EQUAL(0u, page->_restorePreviewFuncs.size());
@@ -1376,19 +1402,21 @@ namespace TerminalAppLocalTests
 
     void TabTests::TestPreviewDismissScheme()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         Log::Comment(L"Preview a color scheme. Make sure it's applied, then dismissed accordingly");
 
         auto page = _commonSetup();
         VERIFY_IS_NOT_NULL(page);
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
-            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, backgroundColor);
         });
 
         TestOnUIThread([&page]() {
@@ -1398,15 +1426,13 @@ namespace TerminalAppLocalTests
             page->_PreviewAction(actionAndArgs);
         });
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
             Log::Comment(L"Color should be changed to the preview");
-            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, backgroundColor);
         });
 
         TestOnUIThread([&page]() {
@@ -1414,15 +1440,13 @@ namespace TerminalAppLocalTests
             page->_EndPreview();
         });
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
             Log::Comment(L"Color should be the same as it originally was");
-            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, backgroundColor);
         });
         Log::Comment(L"Sleep to let events propagate");
         Sleep(250);
@@ -1430,6 +1454,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::TestPreviewSchemeWhilePreviewing()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         Log::Comment(L"Preview a color scheme, then preview another scheme. ");
 
         Log::Comment(L"Preview a color scheme. Make sure it's applied, then committed accordingly");
@@ -1437,14 +1465,12 @@ namespace TerminalAppLocalTests
         auto page = _commonSetup();
         VERIFY_IS_NOT_NULL(page);
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
-            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff0c0c0c }, backgroundColor);
         });
 
         TestOnUIThread([&page]() {
@@ -1453,15 +1479,13 @@ namespace TerminalAppLocalTests
             page->_PreviewColorScheme(args);
         });
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
             Log::Comment(L"Color should be changed to the preview");
-            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xff000000 }, backgroundColor);
         });
 
         TestOnUIThread([&page]() {
@@ -1470,15 +1494,13 @@ namespace TerminalAppLocalTests
             page->_PreviewColorScheme(args);
         });
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
             Log::Comment(L"Color should be changed to the preview");
-            VERIFY_ARE_EQUAL(til::color{ 0xffFAFAFA }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xffFAFAFA }, backgroundColor);
         });
 
         TestOnUIThread([&page]() {
@@ -1489,15 +1511,13 @@ namespace TerminalAppLocalTests
             page->_HandleSetColorScheme(nullptr, ActionEventArgs{ args });
         });
 
-        TestOnUIThread([&page]() {
+        TestOnUIThread([&page, this]() {
             const auto& activeControl{ page->_GetActiveControl() };
             VERIFY_IS_NOT_NULL(activeControl);
 
-            const auto& controlSettings = activeControl.Settings();
-            VERIFY_IS_NOT_NULL(controlSettings);
-
             Log::Comment(L"Color should be changed");
-            VERIFY_ARE_EQUAL(til::color{ 0xffFAFAFA }, til::color{ controlSettings.DefaultBackground() });
+            const auto backgroundColor{ _getControlBackgroundColor(_contentManager.get(), activeControl) };
+            VERIFY_ARE_EQUAL(til::color{ 0xffFAFAFA }, backgroundColor);
         });
         Log::Comment(L"Sleep to let events propagate");
         Sleep(250);
@@ -1505,6 +1525,10 @@ namespace TerminalAppLocalTests
 
     void TabTests::TestClampSwitchToTab()
     {
+        BEGIN_TEST_METHOD_PROPERTIES()
+            TEST_METHOD_PROPERTY(L"Ignore", L"True") // GH#19610 tracks re-enabling this test
+        END_TEST_METHOD_PROPERTIES()
+
         Log::Comment(L"Test that switching to a tab index higher than the number of tabs just clamps to the last tab.");
 
         auto page = _commonSetup();

src/cascadia/LocalTests_TerminalApp/TerminalApp.LocalTests.vcxproj

@@ -24,6 +24,7 @@
   <PropertyGroup Label="NuGet Dependencies">
     <!-- TerminalCppWinrt is intentionally not set -->
     <TerminalMUX>true</TerminalMUX>
+    <TerminalThemeHelpers>true</TerminalThemeHelpers>
   </PropertyGroup>
 
   <Import Project="$(SolutionDir)\common.openconsole.props" Condition="'$(OpenConsoleDir)'==''" />
@@ -59,6 +60,9 @@
     <ProjectReference Include="$(OpenConsoleDir)src\cascadia\TerminalConnection\TerminalConnection.vcxproj" />
     <ProjectReference Include="$(OpenConsoleDir)\src\cascadia\TerminalApp\dll\TerminalApp.vcxproj" />
     <ProjectReference Include="$(OpenConsoleDir)\src\cascadia\TerminalSettingsModel\dll\Microsoft.Terminal.Settings.Model.vcxproj" />
+    <ProjectReference Include="$(OpenConsoleDir)\src\cascadia\TerminalSettingsAppAdapterLib\TerminalSettingsAppAdapterLib.vcxproj">
+      <Project>{3c46e2b0-ae6c-4132-9122-6772fb411959}</Project>
+    </ProjectReference>
   </ItemGroup>
 
   <!-- ========================= Globals ======================== -->

src/cascadia/LocalTests_TerminalApp/TestHostApp/TestHostApp.vcxproj

@@ -22,6 +22,7 @@
     <VcpkgAutoLink>false</VcpkgAutoLink>
 
     <TerminalMUX>true</TerminalMUX>
+    <TerminalThemeHelpers>true</TerminalThemeHelpers>
 
     <!--
     These two properties are very important!
@@ -114,6 +115,9 @@
       <Project>{CA5CAD1A-082C-4476-9F33-94B339494076}</Project>
     </ProjectReference>
 
+    <ProjectReference Include="$(OpenConsoleDir)src\cascadia\UIHelpers\UIHelpers.vcxproj">
+      <Project>{6515F03F-E56D-4DB4-B23D-AC4FB80DB36F}</Project>
+    </ProjectReference>
   </ItemGroup>
 
   <PropertyGroup>

src/cascadia/Remoting/Resources/sr-Cyrl-RS/Resources.resw

@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!--
+    Microsoft ResX Schema
+
+    Version 2.0
+
+    The primary goals of this format is to allow a simple XML format
+    that is mostly human readable. The generation and parsing of the
+    various data types are done through the TypeConverter classes
+    associated with the data types.
+
+    Example:
+
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+
+    There are any number of "resheader" rows that contain simple
+    name/value pairs.
+
+    Each data row contains a name, and value. The row also contains a
+    type or mimetype. Type corresponds to a .NET class that support
+    text/value conversion through the TypeConverter architecture.
+    Classes that don't support this are serialized and stored with the
+    mimetype set.
+
+    The mimetype is used for serialized objects, and tells the
+    ResXResourceReader how to depersist the object. This is currently not
+    extensible. For a given mimetype the value must be set accordingly:
+
+    Note - application/x-microsoft.net.object.binary.base64 is the format
+    that the ResXResourceWriter will generate, however the reader can
+    read any of the formats listed below.
+
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>

src/cascadia/TerminalApp/AboutDialog.cpp

@@ -6,7 +6,6 @@
 #include "AboutDialog.h"
 #include "AboutDialog.g.cpp"
 
-#include <LibraryResources.h>
 #include <WtExeUtils.h>
 
 #include "../../types/inc/utils.hpp"

src/cascadia/TerminalApp/ActionPreviewHandlers.cpp

@@ -5,8 +5,7 @@
 #include "TerminalPage.h"
 #include "Utils.h"
 #include "../../types/inc/utils.hpp"
-
-#include <LibraryResources.h>
+#include "../TerminalSettingsAppAdapterLib/TerminalSettings.h"
 
 using namespace winrt;
 using namespace winrt::Windows::Foundation::Collections;
@@ -97,24 +96,19 @@ namespace winrt::TerminalApp::implementation
     {
         if (const auto& scheme{ _settings.GlobalSettings().ColorSchemes().TryLookup(args.SchemeName()) })
         {
-            const auto backup = _restorePreviewFuncs.empty();
+            // Clear the saved preview funcs because we don't need to add a restore each time
+            // the preview color changes, we only need to be able to restore the last one.
+            _restorePreviewFuncs.clear();
 
             _ApplyToActiveControls([&](const auto& control) {
-                // Stash a copy of the current scheme.
-                auto originalScheme{ control.ColorScheme() };
+                auto temporarySettings{ winrt::make_self<Settings::TerminalSettings>() };
+                temporarySettings->ApplyColorScheme(scheme);
+                control.ApplyPreviewColorScheme(temporarySettings.try_as<winrt::Microsoft::Terminal::Core::ICoreScheme>());
 
-                // Apply the new scheme.
-                control.ColorScheme(scheme.ToCoreScheme());
-
-                if (backup)
-                {
-                    // Each control will emplace a revert into the
-                    // _restorePreviewFuncs for itself.
-                    _restorePreviewFuncs.emplace_back([=]() {
-                        // On dismiss, restore the original scheme.
-                        control.ColorScheme(originalScheme);
-                    });
-                }
+                // Take a copy of the inputs, since they are pointers anyways.
+                _restorePreviewFuncs.emplace_back([=]() {
+                    control.ResetPreviewColorScheme();
+                });
             });
         }
     }

src/cascadia/TerminalApp/AppActionHandlers.cpp

@@ -8,6 +8,7 @@
 #include "ScratchpadContent.h"
 #include "../WinRTUtils/inc/WtExeUtils.h"
 #include "../../types/inc/utils.hpp"
+#include "../TerminalSettingsAppAdapterLib/TerminalSettings.h"
 #include "Utils.h"
 
 using namespace winrt::Windows::ApplicationModel::DataTransfer;
@@ -548,7 +549,9 @@ namespace winrt::TerminalApp::implementation
     {
         if (const auto& realArgs = args.ActionArgs().try_as<CopyTextArgs>())
         {
-            const auto handled = _CopyText(realArgs.DismissSelection(), realArgs.SingleLine(), realArgs.WithControlSequences(), realArgs.CopyFormatting());
+            const auto copyFormatting = realArgs.CopyFormatting();
+            const auto format = copyFormatting ? copyFormatting.Value() : _settings.GlobalSettings().CopyFormatting();
+            const auto handled = _CopyText(realArgs.DismissSelection(), realArgs.SingleLine(), realArgs.WithControlSequences(), format);
             args.Handled(handled);
         }
     }
@@ -666,8 +669,10 @@ namespace winrt::TerminalApp::implementation
         {
             if (const auto scheme = _settings.GlobalSettings().ColorSchemes().TryLookup(realArgs.SchemeName()))
             {
+                auto temporarySettings{ winrt::make_self<Settings::TerminalSettings>() };
+                temporarySettings->ApplyColorScheme(scheme);
                 const auto res = _ApplyToActiveControls([&](auto& control) {
-                    control.ColorScheme(scheme.ToCoreScheme());
+                    control.SetOverrideColorScheme(temporarySettings.try_as<winrt::Microsoft::Terminal::Core::ICoreScheme>());
                 });
                 args.Handled(res);
             }

src/cascadia/TerminalApp/AppCommandlineArgs.cpp

@@ -5,7 +5,6 @@
 #include "AppCommandlineArgs.h"
 #include "../types/inc/utils.hpp"
 #include "TerminalSettingsModel/ModelSerializationHelpers.h"
-#include <LibraryResources.h>
 
 using namespace winrt::Microsoft::Terminal::Settings::Model;
 using namespace TerminalApp;

src/cascadia/TerminalApp/AppLogic.cpp

@@ -6,7 +6,6 @@
 #include "AppLogic.g.cpp"
 #include "SettingsLoadEventArgs.h"
 
-#include <LibraryResources.h>
 #include <WtExeUtils.h>
 #include <wil/token_helpers.h>
 
@@ -135,12 +134,19 @@ namespace winrt::TerminalApp::implementation
         _isElevated = ::Microsoft::Console::Utils::IsRunningElevated();
         _canDragDrop = ::Microsoft::Console::Utils::CanUwpDragDrop();
 
-        _reloadSettings = std::make_shared<ThrottledFuncTrailing<>>(winrt::Windows::System::DispatcherQueue::GetForCurrentThread(), std::chrono::milliseconds(100), [weakSelf = get_weak()]() {
-            if (auto self{ weakSelf.get() })
-            {
-                self->ReloadSettings();
-            }
-        });
+        _reloadSettings = std::make_shared<ThrottledFunc<>>(
+            DispatcherQueue::GetForCurrentThread(),
+            til::throttled_func_options{
+                .delay = std::chrono::milliseconds{ 100 },
+                .debounce = true,
+                .trailing = true,
+            },
+            [weakSelf = get_weak()]() {
+                if (auto self{ weakSelf.get() })
+                {
+                    self->ReloadSettings();
+                }
+            });
 
         _languageProfileNotifier = winrt::make_self<LanguageProfileNotifier>([this]() {
             _reloadSettings->Run();

src/cascadia/TerminalApp/AppLogic.h

@@ -64,7 +64,7 @@ namespace winrt::TerminalApp::implementation
         bool _hasSettingsStartupActions{ false };
         ::TerminalApp::AppCommandlineArgs _settingsAppArgs;
 
-        std::shared_ptr<ThrottledFuncTrailing<>> _reloadSettings;
+        std::shared_ptr<ThrottledFunc<>> _reloadSettings;
 
         std::vector<Microsoft::Terminal::Settings::Model::SettingsLoadWarnings> _warnings{};
 

src/cascadia/TerminalApp/ColorHelper.cpp

@@ -1,267 +0,0 @@
-#include "ColorHelper.h"
-
-using namespace winrt::TerminalApp;
-
-// Method Description:
-// Determines whether or not a given color is light
-// Arguments:
-// - color: this color is going to be examined whether it
-// is light or not
-// Return Value:
-// - true if light, false if dark
-bool ColorHelper::IsBrightColor(const winrt::Windows::UI::Color& color)
-{
-    // https://www.w3.org/TR/AERT#color-contrast
-    auto brightness = (color.R * 299 + color.G * 587 + color.B * 114) / 1000.f;
-    return brightness > 128.f;
-}
-
-// Method Description:
-// Converts a rgb color to an hsl one
-// Arguments:
-// - color: the rgb color, which is going to be converted
-// Return Value:
-// - a hsl color with the following ranges
-//      - H: [0.f -360.f]
-//      - L: [0.f - 1.f] (rounded to the third decimal place)
-//      - S: [0.f - 1.f] (rounded to the third decimal place)
-HSL ColorHelper::RgbToHsl(const winrt::Windows::UI::Color& color)
-{
-    // https://www.rapidtables.com/convert/color/rgb-to-hsl.html
-    auto epsilon = std::numeric_limits<float>::epsilon();
-    auto r = color.R / 255.f;
-    auto g = color.G / 255.f;
-    auto b = color.B / 255.f;
-
-    auto max = std::max(r, std::max(g, b));
-    auto min = std::min(r, std::min(g, b));
-
-    auto delta = max - min;
-
-    auto h = 0.f;
-    auto s = 0.f;
-    auto l = (max + min) / 2;
-
-    if (delta < epsilon || max < epsilon) /* delta == 0 || max == 0*/
-    {
-        l = std::roundf(l * 1000) / 1000;
-        return HSL{ h, s, l };
-    }
-
-    s = l > 0.5 ? delta / (2 - max - min) : delta / (max + min);
-
-    if (max - r < epsilon) // max == r
-    {
-        h = (g - b) / delta + (g < b ? 6 : 0);
-    }
-    else if (max - g < epsilon) // max == g
-    {
-        h = (b - r) / delta + 2;
-    }
-    else if (max - b < epsilon) // max == b
-    {
-        h = (r - g) / delta + 4;
-    }
-
-    // three decimal places after the comma ought
-    // to be enough for everybody - Bill Gates, 1981
-    auto finalH = std::roundf(h * 60);
-    auto finalS = std::roundf(s * 1000) / 1000;
-    auto finalL = std::roundf(l * 1000) / 1000;
-
-    return HSL{ finalH, finalS, finalL };
-}
-
-// Method Description:
-// Converts a hsl color to rgb one
-// Arguments:
-// - color: the hsl color, which is going to be converted
-// Return Value:
-// - the rgb color (r,g,b - [0, 255] range)
-winrt::Windows::UI::Color ColorHelper::HslToRgb(const HSL& color)
-{
-    auto epsilon = std::numeric_limits<float>::epsilon();
-
-    auto h = (color.H - 1.f > epsilon) ? color.H / 360.f : color.H;
-    auto s = (color.S - 1.f > epsilon) ? color.S / 100.f : color.S;
-    auto l = (color.L - 1.f > epsilon) ? color.L / 100.f : color.L;
-
-    auto r = l;
-    auto g = l;
-    auto b = l;
-
-    if (s > epsilon)
-    {
-        auto q = l < 0.5 ? l * (1 + s) : l + s - l * s;
-        auto p = 2 * l - q;
-        r = HueToRgb(p, q, h + 1.f / 3.f);
-        g = HueToRgb(p, q, h);
-        b = HueToRgb(p, q, h - 1.f / 3.f);
-    }
-
-    auto finalR = static_cast<uint8_t>(std::roundf(r * 255));
-    auto finalG = static_cast<uint8_t>(std::roundf(g * 255));
-    auto finalB = static_cast<uint8_t>(std::roundf(b * 255));
-    uint8_t finalA = 255; //opaque
-
-    return winrt::Windows::UI::ColorHelper::FromArgb(finalA, finalR, finalG, finalB);
-}
-
-float ColorHelper::HueToRgb(float p, float q, float t)
-{
-    auto epsilon = std::numeric_limits<float>::epsilon();
-
-    if (t < 0)
-        t += 1;
-    if (t > 1)
-        t -= 1;
-    if (t - (1.f / 6.f) < epsilon)
-        return p + (q - p) * 6 * t;
-    if (t - .5f < epsilon)
-        return q;
-    if (t - 2.f / 3.f < epsilon)
-        return p + (q - p) * (2.f / 3.f - t) * 6;
-    return p;
-}
-
-// Method Description:
-// Lightens a color by a given amount
-// Arguments:
-// - color: the color which is going to be lightened
-// - amount: the lighten amount (0-100)
-// Return Value:
-// - the lightened color in RGB format
-winrt::Windows::UI::Color ColorHelper::Lighten(const winrt::Windows::UI::Color& color, float amount /* = 10.f*/)
-{
-    auto hsl = RgbToHsl(color);
-    hsl.L += amount / 100;
-    hsl.L = std::clamp(hsl.L, 0.f, 1.f);
-    return HslToRgb(hsl);
-}
-
-// Method Description:
-// Darkens a color by a given amount
-// Arguments:
-// - color: the color which is going to be darkened
-// - amount: the darken amount (0-100)
-// Return Value:
-// - the darkened color in RGB format
-winrt::Windows::UI::Color ColorHelper::Darken(const winrt::Windows::UI::Color& color, float amount /* = 10.f*/)
-{
-    auto hsl = RgbToHsl(color);
-    hsl.L -= amount / 100;
-    hsl.L = std::clamp(hsl.L, 0.f, 1.f);
-    return HslToRgb(hsl);
-}
-
-// Method Description:
-// Gets an accent color to a given color. Basically, generates
-// 16 shades of the color and finds the first which has a good
-// contrast according to https://www.w3.org/TR/2008/REC-WCAG20-20081211/#contrast-ratiodef (WCAG Version 2)
-// Readability ratio of 3.5 seems to look quite nicely
-// Arguments:
-// - color: the color for which we need an accent
-// Return Value:
-// - the accent color in RGB format
-winrt::Windows::UI::Color ColorHelper::GetAccentColor(const winrt::Windows::UI::Color& color)
-{
-    auto accentColor = RgbToHsl(color);
-
-    if (accentColor.S < 0.15)
-    {
-        accentColor.S = 0.15f;
-    }
-
-    constexpr auto shadeCount = 16;
-    constexpr auto shadeStep = 1.f / shadeCount;
-    auto shades = std::map<float, HSL>();
-    for (auto i = 0; i < 15; i++)
-    {
-        auto shade = HSL{ accentColor.H, accentColor.S, i * shadeStep };
-        auto contrast = GetReadability(shade, accentColor);
-        shades.insert(std::make_pair(contrast, shade));
-    }
-
-    // 3f is quite nice if the whole non-client area is painted
-    constexpr auto readability = 1.75f;
-    for (auto shade : shades)
-    {
-        if (shade.first >= readability)
-        {
-            return HslToRgb(shade.second);
-        }
-    }
-    return HslToRgb(shades.end()->second);
-}
-
-// Method Description:
-// Gets the readability of two colors according to
-// https://www.w3.org/TR/2008/REC-WCAG20-20081211/#contrast-ratiodef (WCAG Version 2)
-// Arguments:
-// - firstColor: the first color for the readability check (hsl)
-// - secondColor: the second color for the readability check (hsl)
-// Return Value:
-// - the readability of the colors according to (WCAG Version 2)
-float ColorHelper::GetReadability(const HSL& first, const HSL& second)
-{
-    return GetReadability(HslToRgb(first), HslToRgb(second));
-}
-
-// Method Description:
-// Gets the readability of two colors according to
-// https://www.w3.org/TR/2008/REC-WCAG20-20081211/#contrast-ratiodef (WCAG Version 2)
-// Arguments:
-// - firstColor: the first color for the readability check (rgb)
-// - secondColor: the second color for the readability check (rgb)
-// Return Value:
-// - the readability of the colors according to (WCAG Version 2)
-float ColorHelper::GetReadability(const winrt::Windows::UI::Color& first, const winrt::Windows::UI::Color& second)
-{
-    auto l1 = GetLuminance(first);
-    auto l2 = GetLuminance(second);
-
-    return (std::max(l1, l2) + 0.05f) / std::min(l1, l2) + 0.05f;
-}
-
-// Method Description:
-// Calculates the luminance of a given color according to
-// https://www.w3.org/TR/2008/REC-WCAG20-20081211/#relativeluminancedef
-// Arguments:
-// - color: its luminance is going to be calculated
-// Return Value:
-// - the luminance of the color
-float ColorHelper::GetLuminance(const winrt::Windows::UI::Color& color)
-{
-    auto epsilon = std::numeric_limits<float>::epsilon();
-    float R, G, B;
-    auto RsRGB = color.R / 255.f;
-    auto GsRGB = color.G / 255.f;
-    auto BsRGB = color.B / 255.f;
-
-    if (RsRGB - 0.03928f <= epsilon)
-    {
-        R = RsRGB / 12.92f;
-    }
-    else
-    {
-        R = std::pow(((RsRGB + 0.055f) / 1.055f), 2.4f);
-    }
-    if (GsRGB - 0.03928f <= epsilon)
-    {
-        G = GsRGB / 12.92f;
-    }
-    else
-    {
-        G = std::pow(((GsRGB + 0.055f) / 1.055f), 2.4f);
-    }
-    if (BsRGB - 0.03928f <= epsilon)
-    {
-        B = BsRGB / 12.92f;
-    }
-    else
-    {
-        B = std::pow(((BsRGB + 0.055f) / 1.055f), 2.4f);
-    }
-    auto luminance = (0.2126f * R) + (0.7152f * G) + (0.0722f * B);
-    return std::roundf(luminance * 10000) / 10000.f;
-}

src/cascadia/TerminalApp/ColorHelper.h

@@ -1,31 +0,0 @@
-#pragma once
-
-#include <winrt/Windows.UI.h>
-
-namespace winrt::TerminalApp
-{
-    class HSL
-    {
-    public:
-        float H;
-        float S;
-        float L;
-    };
-
-    class ColorHelper
-    {
-    public:
-        static bool IsBrightColor(const Windows::UI::Color& color);
-        static HSL RgbToHsl(const Windows::UI::Color& color);
-        static Windows::UI::Color HslToRgb(const HSL& color);
-        static Windows::UI::Color Lighten(const Windows::UI::Color& color, float amount = 10.f);
-        static Windows::UI::Color Darken(const Windows::UI::Color& color, float amount = 10.f);
-        static Windows::UI::Color GetAccentColor(const Windows::UI::Color& color);
-        static float GetLuminance(const Windows::UI::Color& color);
-        static float GetReadability(const Windows::UI::Color& first, const Windows::UI::Color& second);
-        static float GetReadability(const HSL& first, const HSL& second);
-
-    private:
-        static float HueToRgb(float p, float q, float t);
-    };
-}

src/cascadia/TerminalApp/ColorPickupFlyout.cpp

@@ -1,7 +1,6 @@
 #include "pch.h"
 #include "ColorPickupFlyout.h"
 #include "ColorPickupFlyout.g.cpp"
-#include <LibraryResources.h>
 
 namespace winrt::TerminalApp::implementation
 {