Re-enable MSBuildCache

Reverts most of the styling changes done in #19001 to the key chords
displayed in the SUI's Actions page. The `CornerRadius` was kept at the
updated value of `ControlCornerRadius` for consistency.

The only other changes in #19001 that were kept for this page include:
- `EditButtonIconSize`: 15 --> 14
- `AccentEditButtonStyle` > `Padding`: 3 --> 4
- Command name's `FontWeight` reduced to `Normal`
- `AddNewButton` > `Margin` added (set to `0,12,0,0` to provide spacing
between breadcrumb header and button)

.config/configuration.vsEnterprise.winget

@@ -0,0 +1,43 @@
+# yaml-language-server: $schema=https://aka.ms/configuration-dsc-schema/0.2
+# Reference: https://github.com/microsoft/terminal/blob/main/README.md#developer-guidance
+properties:
+  resources:
+    - resource: Microsoft.Windows.Settings/WindowsSettings
+      directives:
+        description: Enable Developer Mode
+        allowPrerelease: true
+        # Requires elevation for the set operation
+        securityContext: elevated
+      settings:
+        DeveloperMode: true
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: powershell
+      directives:
+        description: Install PowerShell 7
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.PowerShell
+        source: winget
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: vsPackage
+      directives:
+        description: Install Visual Studio 2022 Enterprise (any edition is OK)
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.VisualStudio.2022.Enterprise
+        source: winget
+    - resource: Microsoft.VisualStudio.DSC/VSComponents
+      dependsOn:
+        - vsPackage
+      directives:
+        description: Install required VS workloads from project .vsconfig file
+        allowPrerelease: true
+        # Requires elevation for the get and set operations
+        securityContext: elevated
+      settings:
+        productId: Microsoft.VisualStudio.Product.Enterprise
+        channelId: VisualStudio.17.Release
+        vsConfigFile: '${WinGetConfigRoot}\..\.vsconfig'
+  configurationVersion: 0.2.0

.config/configuration.vsProfessional.winget

@@ -0,0 +1,43 @@
+# yaml-language-server: $schema=https://aka.ms/configuration-dsc-schema/0.2
+# Reference: https://github.com/microsoft/terminal/blob/main/README.md#developer-guidance
+properties:
+  resources:
+    - resource: Microsoft.Windows.Settings/WindowsSettings
+      directives:
+        description: Enable Developer Mode
+        allowPrerelease: true
+        # Requires elevation for the set operation
+        securityContext: elevated
+      settings:
+        DeveloperMode: true
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: powershell
+      directives:
+        description: Install PowerShell 7
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.PowerShell
+        source: winget
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: vsPackage
+      directives:
+        description: Install Visual Studio 2022 Professional (any edition is OK)
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.VisualStudio.2022.Professional
+        source: winget
+    - resource: Microsoft.VisualStudio.DSC/VSComponents
+      dependsOn:
+        - vsPackage
+      directives:
+        description: Install required VS workloads from project .vsconfig file
+        allowPrerelease: true
+        # Requires elevation for the get and set operations
+        securityContext: elevated
+      settings:
+        productId: Microsoft.VisualStudio.Product.Professional
+        channelId: VisualStudio.17.Release
+        vsConfigFile: '${WinGetConfigRoot}\..\.vsconfig'
+  configurationVersion: 0.2.0

.config/configuration.winget

@@ -0,0 +1,43 @@
+# yaml-language-server: $schema=https://aka.ms/configuration-dsc-schema/0.2
+# Reference: https://github.com/microsoft/terminal/blob/main/README.md#developer-guidance
+properties:
+  resources:
+    - resource: Microsoft.Windows.Settings/WindowsSettings
+      directives:
+        description: Enable Developer Mode
+        allowPrerelease: true
+        # Requires elevation for the set operation
+        securityContext: elevated
+      settings:
+        DeveloperMode: true
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: powershell
+      directives:
+        description: Install PowerShell 7
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.PowerShell
+        source: winget
+    - resource: Microsoft.WinGet.DSC/WinGetPackage
+      id: vsPackage
+      directives:
+        description: Install Visual Studio 2022 Community (any edition is OK)
+        # Requires elevation for the set operation (i.e., installation)
+        securityContext: elevated
+      settings:
+        id: Microsoft.VisualStudio.2022.Community
+        source: winget
+    - resource: Microsoft.VisualStudio.DSC/VSComponents
+      dependsOn:
+        - vsPackage
+      directives:
+        description: Install required VS workloads from project .vsconfig file
+        allowPrerelease: true
+        # Requires elevation for the get and set operations
+        securityContext: elevated
+      settings:
+        productId: Microsoft.VisualStudio.Product.Community
+        channelId: VisualStudio.17.Release
+        vsConfigFile: '${WinGetConfigRoot}\..\.vsconfig'
+  configurationVersion: 0.2.0

.github/actions/spelling/allow/allow.txt

@@ -8,32 +8,28 @@ clickable
 cmark
 CMMI
 colorbrewer
+commandlines
 consvc
 copyable
-dalet
 dcs
 deselection
-dialytika
 diffing
-dje
+Dimidium
 downsides
-dze
-dzhe
 Emacspeak
 Fitt
+flac
 FTCS
 gantt
 gfm
 ghe
-gje
 godbolt
+hstrings
 hyperlinking
 hyperlinks
 Kbds
-kje
 libfuzzer
 liga
-lje
 Llast
 Lmid
 locl
@@ -45,10 +41,8 @@ minimalistic
 mkmk
 mnt
 mru
-nje
-NTMTo
 notwrapped
-ogonek
+NTMTo
 overlined
 perlw
 postmodern
@@ -57,6 +51,7 @@ ptys
 pwn
 pwshw
 qof
+QOL
 qps
 quickfix
 rclt
@@ -69,24 +64,19 @@ rlig
 rubyw
 runtimes
 servicebus
-shcha
-similaritytolerance
 slnt
 stakeholders
+subpage
 sustainability
 sxn
-TLDR
-tonos
+Tencent
 toolset
-tshe
 UEFI
 uiatextrange
 und
 vsdevcmd
 westus
 workarounds
-wtconfig
+WSLs
 XBox
 YBox
-yeru
-zhe

.github/actions/spelling/allow/apis.txt

@@ -2,11 +2,8 @@ aalt
 abvm
 ACCEPTFILES
 ACCESSDENIED
-acl
-aclapi
 alignas
 alignof
-allocconsolewithoptions
 APPLYTOSUBMENUS
 appxrecipe
 bitfield
@@ -15,29 +12,20 @@ BUILDBRANCH
 BUILDMSG
 BUILDNUMBER
 BYCOMMAND
-BYPOSITION
 charconv
-CLASSNOTAVAILABLE
 CLOSEAPP
 cmdletbinding
-COLORPROPERTY
 colspan
 COMDLG
 commandlinetoargv
-commoncontrols
-comparand
 COPYFROMRESOURCE
 cstdint
 CXICON
 CYICON
-Dacl
 dataobject
-dcomp
 debugbreak
 delayimp
-DERR
 dlldata
-DNE
 dnom
 DONTADDTORECENT
 DWMSBT
@@ -64,92 +52,51 @@ GETHIGHCONTRAST
 GETMOUSEHOVERTIME
 GETTEXTLENGTH
 HARDBREAKS
-Hashtable
 HIGHCONTRASTON
 HIGHCONTRASTW
 HIGHQUALITYSCALE
 hinternet
-HINTERNET
 hotkeys
 href
 hrgn
 HTCLOSE
 hwinsta
-HWINSTA
-IActivation
-IApp
 IAppearance
-IAsync
-IBind
-IBox
-IClass
-IComparable
-IComparer
 ICONINFO
-IConnection
-ICustom
-IDialog
 IDirect
-Idn
-IExplorer
-IFACEMETHOD
-IFile
-IGraphics
-IImage
 IInheritable
-IMap
 imm
-IMonarch
-IObject
 iosfwd
-IPackage
-IPeasant
 isa
-ISetup
 isspace
-IStorage
 istream
-IStringable
-ITab
-ITaskbar
-itow
-IUri
-IVirtual
 KEYSELECT
 LCID
 LINEBREAK
-llabs
-llu
-localtime
 lround
 Lsa
 lsass
 LSHIFT
 LTGRAY
 MAINWINDOW
-MAXIMIZEBOX
 medi
-memchr
 memicmp
 MENUCOMMAND
 MENUDATA
 MENUINFO
 MENUITEMINFOW
 MINIMIZEBOX
-mmeapi
 MOUSELEAVE
 mov
-mptt
-msappx
 MULTIPLEUSE
 NCHITTEST
 NCLBUTTONDBLCLK
 NCMOUSELEAVE
 NCMOUSEMOVE
+NCPOINTERUPDATE
 NCRBUTTONDBLCLK
 NIF
 NIN
-NOAGGREGATION
 NOASYNC
 NOBREAKS
 NOCHANGEDIR
@@ -162,8 +109,6 @@ NOTIFYICONDATA
 ntprivapi
 NTSYSCALLAPI
 numr
-oaidl
-ocidl
 ODR
 offsetof
 ofstream
@@ -173,22 +118,17 @@ OSVERSIONINFOEXW
 otms
 OUTLINETEXTMETRICW
 overridable
-PACL
 PAGESCROLL
 PALLOC
 PATINVERT
-PEXPLICIT
 PICKFOLDERS
 PINPUT
 pmr
-ptstr
 QUERYENDSESSION
 rcx
 REGCLS
 RETURNCMD
 rfind
-RLO
-rnrn
 ROOTOWNER
 roundf
 RSHIFT
@@ -207,23 +147,19 @@ SHOWTIP
 SINGLEUSE
 SIZENS
 smoothstep
-snprintf
 SOFTBREAK
 spsc
-sregex
 SRWLOC
 srwlock
 SRWLOCK
 STDCPP
 STDMETHOD
-strchr
 strcpy
 streambuf
 strtoul
 Stubless
-Subheader
-Subpage
 syscall
+syscolors
 SYSTEMBACKDROP
 TABROW
 TASKBARCREATED
@@ -238,23 +174,17 @@ tokeninfo
 tolower
 toupper
 TRACKMOUSEEVENT
-TTask
-TVal
 UChar
 UFIELD
 ULARGE
 UOI
 UPDATEINIFILE
 urlmon
-userenv
 USEROBJECTFLAGS
 Vcpp
 Viewbox
 virtualalloc
-vsnwprintf
 wcsnlen
-wcsstr
-wcstoui
 WDJ
 winhttp
 wininet
@@ -264,10 +194,8 @@ winstamin
 wmemcmp
 wpc
 WSF
-wsregex
 WWH
 wwinmain
-xchg
 XDocument
 XElement
 xfacet
@@ -291,4 +219,5 @@ xtree
 xutility
 YIcon
 YMax
+zstring
 zwstring

.github/actions/spelling/allow/chinese.txt

@@ -1,5 +1,4 @@
 CHINESEBIG
 choseong
-Jongseong
-Jungseong
-ssangtikeut
+Choseong
+CHOSEONG

.github/actions/spelling/allow/colors.txt

@@ -1,4 +1,3 @@
-alice
 aliceblue
 antiquewhite
 blanchedalmond
@@ -39,7 +38,6 @@ gainsboro
 ghostwhite
 greenyellow
 hotpink
-indian
 indianred
 lavenderblush
 lawngreen
@@ -74,7 +72,6 @@ mediumvioletred
 midnightblue
 mintcream
 mistyrose
-navajo
 navajowhite
 navyblue
 oldlace
@@ -88,7 +85,6 @@ papayawhip
 peachpuff
 peru
 powderblue
-rebecca
 rebeccapurple
 rosybrown
 royalblue
@@ -109,9 +105,4 @@ webgrey
 webmaroon
 webpurple
 whitesmoke
-xaroon
-xray
-xreen
-xrey
-xurple
 yellowgreen

.github/actions/spelling/allow/fonts.txt

@@ -1,8 +1,8 @@
 Consolas
 emoji
 emojis
+Emojis
 Extralight
-Gabriola
 Iosevka
 MDL
 Monofur

.github/actions/spelling/allow/japanese.txt

@@ -1,4 +1 @@
-arigatoo
-doomo
-Kaomojis
 TATEGAKI

.github/actions/spelling/allow/math.txt

@@ -1,11 +1,2 @@
-atan
-CPrime
-HBar
-HPrime
 isnan
-LPrime
-LStep
-powf
-RSub
-sqrtf
 ULP

.github/actions/spelling/allow/microsoft.txt

@@ -4,12 +4,11 @@ advapi
 akv
 AKV
 altform
-altforms
+Altforms
 appendwttlogging
 appinstaller
 appx
 appxbundle
-appxerror
 appxmanifest
 ATL
 autoexec
@@ -25,66 +24,43 @@ CPRs
 cryptbase
 cscript
 DACL
-DACLs
 defaultlib
 diffs
 disposables
-dotnetfeed
-DTDs
-DWINRT
 enablewttlogging
 HOMESHARE
 Intelli
 issecret
-IVisual
 libucrt
 libucrtd
-LKG
 LOCKFILE
 Lxss
 makepri
-mfcribbon
 microsoft
-microsoftonline
 MSAA
 msixbundle
 MSVC
 MSVCP
 mtu
 muxc
-netcore
-Onefuzz
-osgvsowi
-PFILETIME
 pgc
 pgo
 pgosweep
-powerrename
 powershell
 priconfig
 PRIINFO
 propkey
 pscustomobject
 QWORD
-rdpclip
 regedit
 resfiles
-robocopy
 SACLs
-sdkddkver
 segoe
-Shobjidl
 sid
-Skype
 SRW
 sxs
 symbolrequestprod
 Sysinternals
-sysnative
-systemroot
-taskkill
-tasklist
-tdbuildteamid
 ucrt
 ucrtd
 unvirtualized
@@ -92,12 +68,9 @@ USERDNSDOMAIN
 VCRT
 vcruntime
 Virtualization
-visualstudio
 vscode
 VSTHRD
 WINBASEAPI
-winsdkver
-wlk
 wscript
 wslpath
 wtl

.github/actions/spelling/allow/names.txt

@@ -1,4 +1,3 @@
-Anup
 arkthur
 austdi
 Ballmer
@@ -6,13 +5,11 @@ bhoj
 Bhojwani
 Bluloco
 carlos
-craigloewen
 dhowett
 Diviness
 dsafa
 duhowett
 DXP
-ekg
 eryksun
 ethanschoonover
 Firefox
@@ -25,70 +22,42 @@ Hernan
 Howett
 Illhardt
 Imms
-iquilezles
 italo
 jantari
 jerrysh
 Kaiyu
-kimwalisch
-KMehrain
-Kodelife
-KODELIFE
-Kourosh
-kowalczyk
 leonardder
-leonmsft
-Lepilleur
 lhecker
-lukesampson
-Macbook
-Manandhar
 masserano
-mbadolato
-Mehrain
 menger
-mgravell
-michaelniksa
-michkap
 migrie
 mikegr
 mikemaccana
-miloush
 miniksa
 nguyen
 niksa
 nvaccess
 nvda
-oising
-oldnewthing
-opengl
 osgwiki
 Ottosson
 pabhojwa
-panos
+Panos
 paulcam
-pauldotknopf
 PGP
 Pham
 Rincewind
-rprichard
 Schoonover
 shadertoy
 Shomnipotence
 simioni
-Somuah
 sonph
 sonpham
 stakx
-talo
 thereses
 Thysell
-Walisch
 WDX
 Wellons
 Westerman
-Wirt
-Wojciech
 zadjii
 Zamor
 zamora
@@ -96,4 +65,3 @@ Zamora
 zljubisic
 Zoey
 zorio
-Zverovich

.github/actions/spelling/candidate.patterns

@@ -1,3 +1,6 @@
+# Repeated letters
+\b([a-z])\g{-1}{2,}\b
+
 # marker to ignore all code on line
 ^.*/\* #no-spell-check-line \*/.*$
 # marker to ignore all code on line
@@ -7,14 +10,20 @@
 # cspell inline
 ^.*\b[Cc][Ss][Pp][Ee][Ll]{2}:\s*[Dd][Ii][Ss][Aa][Bb][Ll][Ee]-[Ll][Ii][Nn][Ee]\b
 
+# copyright
+Copyright (?:\([Cc]\)|)(?:[-\d, ]|and)+(?: [A-Z][a-z]+ [A-Z][a-z]+,?)+
+
 # patch hunk comments
-^\@\@ -\d+(?:,\d+|) \+\d+(?:,\d+|) \@\@ .*
+^@@ -\d+(?:,\d+|) \+\d+(?:,\d+|) @@ .*
 # git index header
 index (?:[0-9a-z]{7,40},|)[0-9a-z]{7,40}\.\.[0-9a-z]{7,40}
 
 # file permissions
 ['"`\s][-bcdLlpsw](?:[-r][-w][-Ssx]){2}[-r][-w][-SsTtx]\+?['"`\s]
 
+# css fonts
+\bfont(?:-family|):[^;}]+
+
 # css url wrappings
 \burl\([^)]+\)
 
@@ -27,13 +36,13 @@ index (?:[0-9a-z]{7,40},|)[0-9a-z]{7,40}\.\.[0-9a-z]{7,40}
 # data url in quotes
 ([`'"])data:(?:[^ `'"].*?|)(?:[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,}).*\g{-1}
 # data url
-data:[-a-zA-Z=;:/0-9+]*,\S*
+\bdata:[-a-zA-Z=;:/0-9+]*,\S*
 
 # https/http/file urls
-(?:\b(?:https?|ftp|file)://)[-A-Za-z0-9+&@#/%?=~_|!:,.;]+[-A-Za-z0-9+&@#/%=~_|]
+(?:\b(?:https?|ftp|file)://)[-A-Za-z0-9+&@#/*%?=~_|!:,.;]+[-A-Za-z0-9+&@#/*%=~_|]
 
 # mailto urls
-mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
+mailto:[-a-zA-Z=;:/?%&0-9+@._]{3,}
 
 # magnet urls
 magnet:[?=:\w]+
@@ -66,6 +75,8 @@ magnet:[?=:\w]+
 
 # Amazon
 \bamazon\.com/[-\w]+/(?:dp/[0-9A-Z]+|)
+# AWS ARN
+arn:aws:[-/:\w]+
 # AWS S3
 \b\w*\.s3[^.]*\.amazonaws\.com/[-\w/&#%_?:=]*
 # AWS execute-api
@@ -92,6 +103,8 @@ vpc-\w+
 \bgoogle-analytics\.com/collect.[-0-9a-zA-Z?%=&_.~]*
 # Google APIs
 \bgoogleapis\.(?:com|dev)/[a-z]+/(?:v\d+/|)[a-z]+/[-@:./?=\w+|&]+
+# Google Artifact Registry
+\.pkg\.dev(?:/[-\w]+)+(?::[-\w]+|)
 # Google Storage
 \b[-a-zA-Z0-9.]*\bstorage\d*\.googleapis\.com(?:/\S*|)
 # Google Calendar
@@ -127,6 +140,8 @@ themes\.googleusercontent\.com/static/fonts/[^/\s"]+/v\d+/[^.]+.
 \bscholar\.google\.com/citations\?user=[A-Za-z0-9_]+
 # Google Colab Research Drive
 \bcolab\.research\.google\.com/drive/[-0-9a-zA-Z_?=]*
+# Google Cloud regions
+(?:us|(?:north|south)america|europe|asia|australia|me|africa)-(?:north|south|east|west|central){1,2}\d+
 
 # GitHub SHAs (api)
 \bapi.github\.com/repos(?:/[^/\s"]+){3}/[0-9a-f]+\b
@@ -153,6 +168,9 @@ themes\.googleusercontent\.com/static/fonts/[^/\s"]+/v\d+/[^.]+.
 # GHSA
 GHSA(?:-[0-9a-z]{4}){3}
 
+# GitHub actions
+\buses:\s+[-\w.]+/[-\w./]+@[-\w.]+
+
 # GitLab commit
 \bgitlab\.[^/\s"]*/\S+/\S+/commit/[0-9a-f]{7,16}#[0-9a-f]{40}\b
 # GitLab merge requests
@@ -162,6 +180,12 @@ GHSA(?:-[0-9a-z]{4}){3}
 # GitLab commits
 \bgitlab\.[^/\s"]*/(?:[^/\s"]+/){2}commits?/[0-9a-f]+\b
 
+# #includes
+^\s*#include\s*(?:<.*?>|".*?")
+
+# #pragma lib
+^\s*#pragma comment\(lib, ".*?"\)
+
 # binance
 accounts\.binance\.com/[a-z/]*oauth/authorize\?[-0-9a-zA-Z&%]*
 
@@ -211,10 +235,10 @@ accounts\.binance\.com/[a-z/]*oauth/authorize\?[-0-9a-zA-Z&%]*
 # medium link
 \blink\.medium\.com/[a-zA-Z0-9]+
 # medium
-\bmedium\.com/\@?[^/\s"]+/[-\w]+
+\bmedium\.com/@?[^/\s"]+/[-\w]+
 
 # microsoft
-\b(?:https?://|)(?:(?:download\.visualstudio|docs|msdn2?|research)\.microsoft|blogs\.msdn)\.com/[-_a-zA-Z0-9()=./%]*
+\b(?:https?://|)(?:(?:(?:blogs|download\.visualstudio|docs|msdn2?|research)\.|)microsoft|blogs\.msdn)\.co(?:m|\.\w\w)/[-_a-zA-Z0-9()=./%]*
 # powerbi
 \bapp\.powerbi\.com/reportEmbed/[^"' ]*
 # vs devops
@@ -276,7 +300,7 @@ slack://[a-zA-Z0-9?&=]+
 [0-9a-f]{32}\@o\d+\.ingest\.sentry\.io\b
 
 # Twitter markdown
-\[\@[^[/\]:]*?\]\(https://twitter.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)\)
+\[@[^[/\]:]*?\]\(https://twitter.com/[^/\s"')]*(?:/status/\d+(?:\?[-_0-9a-zA-Z&=]*|)|)\)
 # Twitter hashtag
 \btwitter\.com/hashtag/[\w?_=&]*
 # Twitter status
@@ -331,7 +355,7 @@ ipfs://[0-9a-zA-Z]{3,}
 [^"\s]+/gitweb/\S+;h=[0-9a-f]+
 
 # HyperKitty lists
-/archives/list/[^@/]+\@[^/\s"]*/message/[^/\s"]*/
+/archives/list/[^@/]+@[^/\s"]*/message/[^/\s"]*/
 
 # lists
 /thread\.html/[^"\s]+
@@ -349,7 +373,7 @@ ipfs://[0-9a-zA-Z]{3,}
 \bopen\.spotify\.com/embed/playlist/\w+
 
 # Mastodon
-\bmastodon\.[-a-z.]*/(?:media/|\@)[?&=0-9a-zA-Z_]*
+\bmastodon\.[-a-z.]*/(?:media/|@)[?&=0-9a-zA-Z_]*
 
 # scastie
 \bscastie\.scala-lang\.org/[^/]+/\w+
@@ -388,12 +412,12 @@ ipfs://[0-9a-zA-Z]{3,}
 \bgetopts\s+(?:"[^"]+"|'[^']+')
 
 # ANSI color codes
-(?:\\(?:u00|x)1[Bb]|\x1b|\\u\{1[Bb]\})\[\d+(?:;\d+|)m
+(?:\\(?:u00|x)1[Bb]|\\03[1-7]|\x1b|\\u\{1[Bb]\})\[\d+(?:;\d+)*m
 
 # URL escaped characters
-\%[0-9A-F][A-F](?=[A-Za-z])
+%[0-9A-F][A-F](?=[A-Za-z])
 # lower URL escaped characters
-\%[0-9a-f][a-f](?=[a-z]{2,})
+%[0-9a-f][a-f](?=[a-z]{2,})
 # IPv6
 #\b(?:[0-9a-fA-F]{0,4}:){3,7}[0-9a-fA-F]{0,4}\b
 
@@ -402,7 +426,7 @@ ipfs://[0-9a-zA-Z]{3,}
 # Punycode
 \bxn--[-0-9a-z]+
 # sha
-sha\d+:[0-9]*[a-f]{3,}[0-9a-f]*
+sha\d+:[0-9a-f]*?[a-f]{3,}[0-9a-f]*
 # sha-... -- uses a fancy capture
 (\\?['"]|&quot;)[0-9a-f]{40,}\g{-1}
 # hex runs
@@ -422,10 +446,17 @@ sha\d+:[0-9]*[a-f]{3,}[0-9a-f]*
 # pki
 -----BEGIN.*-----END
 
+# pki (base64)
+LS0tLS1CRUdJT.*
+
+# C# includes
+^\s*using [^;]+;
+
 # uuid:
 \b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
 # hex digits including css/html color classes:
-(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|[iu]\d+)\b
+(?:[\\0][xX]|\\u|[uU]\+|#x?|%23|&H)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|[iu]\d+)\b
+
 # integrity
 integrity=(['"])(?:\s*sha\d+-[-a-zA-Z=;:/0-9+]{40,})+\g{-1}
 
@@ -443,20 +474,47 @@ integrity=(['"])(?:\s*sha\d+-[-a-zA-Z=;:/0-9+]{40,})+\g{-1}
 Name\[[^\]]+\]=.*
 
 # IServiceProvider / isAThing
-\b(?:I|isA)(?=(?:[A-Z][a-z]{2,})+\b)
+(?:(?:\b|_|(?<=[a-z]))I|(?:\b|_)(?:nsI|isA))(?=(?:[A-Z][a-z]{2,})+(?:[A-Z\d]|\b))
+
+# python
+\b(?i)py(?!gments|gmy|lon|ramid|ro|th)(?=[a-z]{2,})
 
 # crypt
 (['"])\$2[ayb]\$.{56}\g{-1}
 
+# apache/old crypt
+#(['"]|)\$+(?:apr|)1\$+.{8}\$+.{22}\g{-1}
+
+# sha1 hash
+\{SHA\}[-a-zA-Z=;:/0-9+]{3,}
+
+# machine learning (?)
+\b(?i)ml(?=[a-z]{2,})
+
 # scrypt / argon
 \$(?:scrypt|argon\d+[di]*)\$\S+
 
 # go.sum
 \bh1:\S+
 
+# imports
+^import\s+(?:(?:static|type)\s+|)(?:[\w.]|\{\s*\w*?(?:,\s*(?:\w*|\*))+\s*\})+
+
 # scala modules
 ("[^"]+"\s*%%?\s*){2,3}"[^"]+"
 
+# container images
+image: [-\w./:@]+
+
+# Docker images
+^\s*(?i)FROM\s+\S+:\S+(?:\s+AS\s+\S+|)
+
+# `docker images` REPOSITORY TAG IMAGE ID CREATED SIZE
+\s*\S+/\S+\s+\S+\s+[0-9a-f]{8,}\s+\d+\s+(?:hour|day|week)s ago\s+[\d.]+[KMGT]B
+
+# Intel intrinsics
+_mm_(?!dd)\w+
+
 # Input to GitHub JSON
 content: (['"])[-a-zA-Z=;:/0-9+]*=\g{-1}
 
@@ -464,36 +522,46 @@ content: (['"])[-a-zA-Z=;:/0-9+]*=\g{-1}
 # you'll want to remove the `(?=.*?")` suffix.
 # The `(?=.*?")` suffix should limit the false positives rate
 # printf
-#%(?:(?:(?:hh?|ll?|[jzt])?[diuoxn]|l?[cs]|L?[fega]|p)(?=[a-z]{2,})|(?:X|L?[FEGA]|p)(?=[a-zA-Z]{2,}))(?=[_a-zA-Z]+\b)(?!%)(?=.*?['"])
+#%(?:(?:(?:hh?|ll?|[jzt])?[diuoxn]|l?[cs]|L?[fega]|p)(?=[a-z]{2,})|(?:X|L?[FEGA])(?=[a-zA-Z]{2,}))(?!%)(?=[_a-zA-Z]+(?!%)\b)(?=.*?['"])
+
+# Alternative printf
+# %s
+%(?:s(?=[a-z]{2,}))(?!%)(?=[_a-zA-Z]+(?!%[^s])\b)(?=.*?['"])
 
 # Python string prefix / binary prefix
 # Note that there's a high false positive rate, remove the `?=` and search for the regex to see if the matches seem like reasonable strings
-(?<!')\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'(?=[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
+(?<!['"])\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)['"](?=[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
 
 # Regular expressions for (P|p)assword
 \([A-Z]\|[a-z]\)[a-z]+
 
 # JavaScript regular expressions
 # javascript test regex
-/.*/[gim]*\.test\(
+/.{3,}/[gim]*\.test\(
 # javascript match regex
-\.match\(/[^/\s"]*/[gim]*\s*
+\.match\(/[^/\s"]{3,}/[gim]*\s*
 # javascript match regex
-\.match\(/\\[b].*?/[gim]*\s*\)(?:;|$)
+\.match\(/\\[b].{3,}?/[gim]*\s*\)(?:;|$)
 # javascript regex
-^\s*/\\[b].*/[gim]*\s*(?:\)(?:;|$)|,$)
+^\s*/\\[b].{3,}?/[gim]*\s*(?:\)(?:;|$)|,$)
 # javascript replace regex
-\.replace\(/[^/\s"]*/[gim]*\s*,
+\.replace\(/[^/\s"]{3,}/[gim]*\s*,
 # assign regex
-= /[^*]*?(?:[a-z]{3,}|[A-Z]{3,}|[A-Z][a-z]{2,}).*/
+= /[^*].*?(?:[a-z]{3,}|[A-Z]{3,}|[A-Z][a-z]{2,}).*/[gim]*(?=\W|$)
 # perl regex test
 [!=]~ (?:/.*/|m\{.*?\}|m<.*?>|m([|!/@#,;']).*?\g{-1})
 
 # perl qr regex
 (?<!\$)\bqr(?:\{.*?\}|<.*?>|\(.*?\)|([|!/@#,;']).*?\g{-1})
 
+# perl run
+perl(?:\s+-[a-zA-Z]\w*)+
+
+# C network byte conversions
+(?:\d|\bh)to(?!ken)(?=[a-z])|to(?=[adhiklpun]\()
+
 # Go regular expressions
-regexp?\.MustCompile\(`[^`]*`\)
+regexp?\.MustCompile\((?:`[^`]*`|".*"|'.*')\)
 
 # regex choice
 \(\?:[^)]+\|[^)]+\)
@@ -505,14 +573,20 @@ regexp?\.MustCompile\(`[^`]*`\)
 sed 's/(?:[^/]*?[a-zA-Z]{3,}[^/]*?/){2}
 
 # node packages
-(["'])\@[^/'" ]+/[^/'" ]+\g{-1}
+(["'])@[^/'" ]+/[^/'" ]+\g{-1}
 
 # go install
 go install(?:\s+[a-z]+\.[-@\w/.]+)+
 
+# pom.xml
+<(?:group|artifact)Id>.*?<
+
 # jetbrains schema https://youtrack.jetbrains.com/issue/RSRP-489571
 urn:shemas-jetbrains-com
 
+# Debian changelog severity
+[-\w]+ \(.*\) (?:\w+|baseline|unstable|experimental); urgency=(?:low|medium|high|emergency|critical)\b
+
 # kubernetes pod status lists
 # https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-phase
 \w+(?:-\w+)+\s+\d+/\d+\s+(?:Running|Pending|Succeeded|Failed|Unknown)\s+
@@ -520,20 +594,29 @@ urn:shemas-jetbrains-com
 # kubectl - pods in CrashLoopBackOff
 \w+-[0-9a-f]+-\w+\s+\d+/\d+\s+CrashLoopBackOff\s+
 
+# kubernetes applications
+\.apps/[-\w]+
+
 # kubernetes object suffix
 -[0-9a-f]{10}-\w{5}\s
 
+# kubernetes crd patterns
+^\s*pattern: .*$
+
 # posthog secrets
 ([`'"])phc_[^"',]+\g{-1}
 
 # xcode
 
 # xcodeproject scenes
-(?:Controller|destination|ID|id)="\w{3}-\w{2}-\w{3}"
+(?:Controller|destination|(?:first|second)Item|ID|id)="\w{3}-\w{2}-\w{3}"
 
 # xcode api botches
 customObjectInstantitationMethod
 
+# msvc api botches
+PrependWithABINamepsace
+
 # configure flags
 .* \| --\w{2,}.*?(?=\w+\s\w+)
 
@@ -541,23 +624,42 @@ customObjectInstantitationMethod
 \.fa-[-a-z0-9]+
 
 # bearer auth
-(['"])Bear[e][r] .*?\g{-1}
+(['"])[Bb]ear[e][r] .{3,}?\g{-1}
+
+# bearer auth
+\b[Bb]ear[e][r]:? [-a-zA-Z=;:/0-9+.]{3,}
 
 # basic auth
-(['"])Basic [-a-zA-Z=;:/0-9+]{3,}\g{-1}
+(['"])[Bb]asic [-a-zA-Z=;:/0-9+]{3,}\g{-1}
+
+# basic auth
+: [Bb]asic [-a-zA-Z=;:/0-9+.]{3,}
 
 # base64 encoded content
-#([`'"])[-a-zA-Z=;:/0-9+]+=\g{-1}
+#([`'"])[-a-zA-Z=;:/0-9+]{3,}=\g{-1}
 # base64 encoded content in xml/sgml
->[-a-zA-Z=;:/0-9+]+=</
+>[-a-zA-Z=;:/0-9+]{3,}=</
 # base64 encoded content, possibly wrapped in mime
 #(?:^|[\s=;:?])[-a-zA-Z=;:/0-9+]{50,}(?:[\s=;:?]|$)
+# base64 encoded json
+\beyJ[-a-zA-Z=;:/0-9+]+
+# base64 encoded pkcs
+#\bMII[-a-zA-Z=;:/0-9+]+
+
+# uuencoded
+#[!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_]{40,}
+
+# DNS rr data
+#(?:\d+\s+){3}(?:[-+/=.\w]{2,}\s*){1,2}
 
 # encoded-word
 =\?[-a-zA-Z0-9"*%]+\?[BQ]\?[^?]{0,75}\?=
 
+# numerator
+\bnumer\b(?=.*denom)
+
 # Time Zones
-\b(?:Africa|Atlantic|America|Antarctica|Asia|Australia|Europe|Indian|Pacific)(?:/\w+)+
+\b(?:Africa|Atlantic|America|Antarctica|Arctic|Asia|Australia|Europe|Indian|Pacific)(?:/[-\w]+)+
 
 # linux kernel info
 ^(?:bugs|flags|Features)\s+:.*
@@ -565,16 +667,22 @@ customObjectInstantitationMethod
 # systemd mode
 systemd.*?running in system mode \([-+].*\)$
 
+# Lorem
 # Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
 # grep '^[^#].*lorem' .github/actions/spelling/patterns.txt|perl -pne 's/.*i..\?://;s/\).*//' |tr '|' "\n"|sort -f |xargs -n1 ge|perl -pne 's/^[^:]*://'|sort -u|w|sed -e 's/ .*//'|w|review -
 # Warning, while `(?i)` is very neat and fancy, if you have some binary files that aren't proper unicode, you might run into:
-## Operation "substitution (s///)" returns its argument for non-Unicode code point 0x1C19AE (the code point will vary).
-## You could manually change `(?i)X...` to use `[Xx]...`
-## or you could add the files to your `excludes` file (a version after 0.0.19 should identify the file path)
-# Lorem
-(?:\w|\s|[,.])*\b(?i)(?:amet|consectetur|cursus|dolor|eros|ipsum|lacus|libero|ligula|lorem|magna|neque|nulla|suscipit|tempus)\b(?:\w|\s|[,.])*
+# ... Operation "substitution (s///)" returns its argument for non-Unicode code point 0x1C19AE (the code point will vary).
+# ... You could manually change `(?i)X...` to use `[Xx]...`
+# ... or you could add the files to your `excludes` file (a version after 0.0.19 should identify the file path)
+(?:(?:\w|\s|[,.])*\b(?i)(?:amet|consectetur|cursus|dolor|eros|ipsum|lacus|libero|ligula|lorem|magna|neque|nulla|suscipit|tempus)\b(?:\w|\s|[,.])*)
 
 # Non-English
+# Even repositories expecting pure English content can unintentionally have Non-English content... People will occasionally mistakenly enter [homoglyphs](https://en.wikipedia.org/wiki/Homoglyph) which are essentially typos, and using this pattern will mean check-spelling will not complain about them.
+#
+# If the content to be checked should be written in English and the only Non-English items will be people's names, then you can consider adding this.
+#
+# Alternatively, if you're using check-spelling v0.0.25+, and you would like to _check_ the Non-English content for spelling errors, you can. For information on how to do so, see:
+# https://docs.check-spelling.dev/Feature:-Configurable-word-characters.html#unicode
 [a-zA-Z]*[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*|[a-zA-Z]{3,}[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]|[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3,}
 
 # highlighted letters
@@ -584,34 +692,55 @@ systemd.*?running in system mode \([-+].*\)$
 # This corpus only had capital letters, but you probably want lowercase ones as well.
 \b[LN]'+[a-z]{2,}\b
 
-# latex (check-spelling <= 0.0.21)
-#\\(?:n(?:ew|ormal|osub)|r(?:enew)|t(?:able(?:of|)|he|itle))(?=[a-z]+)
-
 # latex (check-spelling >= 0.0.22)
 \\\w{2,}\{
 
+# American Mathematical Society (AMS) / Doxygen
+TeX/AMS
+
+# File extensions
+\*\.[+\w]+,
+
 # eslint
 "varsIgnorePattern": ".+"
 
+# nolint
+nolint:\s*[\w,]+
+
 # Windows short paths
-[/\\][^/\\]{5,6}~\d{1,2}[/\\]
+[/\\][^/\\]{5,6}~\d{1,2}(?=[/\\])
+
+# Windows Resources with accelerators
+\b[A-Z]&[a-z]+\b(?!;)
+
+# signed off by
+(?i)Signed-off-by: .*
+
+# cygwin paths
+/cygdrive/[a-zA-Z]/(?:Program Files(?: \(.*?\)| ?)(?:/[-+.~\\/()\w ]+)*|[-+.~\\/()\w])+
 
 # in check-spelling@v0.0.22+, printf markers aren't automatically consumed
 # printf markers
 #(?<!\\)\\[nrt](?=[a-z]{2,})
 
-# alternate markers if you run into latex and friends
+# alternate printf markers if you run into latex and friends
 #(?<!\\)\\[nrt](?=[a-z]{2,})(?=.*['"`])
 
+# Markdown anchor links
+\(#\S*?[a-zA-Z]\S*?\)
+
 # apache
 a2(?:en|dis)
 
 # weak e-tag
 W/"[^"]+"
 
+# authors/credits
+^\*(?: [A-Z](?:\w+|\.)){2,} (?=\[|$)
+
 # the negative lookahead here is to allow catching 'templatesz' as a misspelling
 # but to otherwise recognize a Windows path with \templates\foo.template or similar:
-#\\(?:necessary|r(?:eport|esolve[dr]?|esult)|t(?:arget|emplates?))(?![a-z])
+#\\(?:necessary|r(?:elease|eport|esolve[dr]?|esult)|t(?:arget|emplates?))(?![a-z])
 
 # ignore long runs of a single character:
 \b([A-Za-z])\g{-1}{3,}\b
@@ -621,23 +750,34 @@ W/"[^"]+"
 
 # Compiler flags (Unix, Java/Scala)
 # Use if you have things like `-Pdocker` and want to treat them as `docker`
-#(?:^|[\t ,>"'`=(])-(?:(?:J-|)[DPWXY]|[Llf])(?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
+#(?:^|[\t ,>"'`=(#])-(?:(?:J-|)[DPWXY]|[Llf])(?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
 
 # Compiler flags (Windows / PowerShell)
 # This is a subset of the more general compiler flags pattern.
 # It avoids matching `-Path` to prevent it from being treated as `ath`
-#(?:^|[\t ,"'`=(])-(?:[DPL](?=[A-Z]{2,})|[WXYlf](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,}))
+#(?:^|[\t ,"'`=(#])-(?:[DPL](?=[A-Z]{2,})|[WXYlf](?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,}))
 
 # Compiler flags (linker)
 ,-B
 
+# libraries
+#(?:\b|_)[Ll]ib(?:re(?=office)|)(?!era[lt]|ero|erty|rar(?:i(?:an|es)|y))(?=[a-z])
+
+# iSCSI iqn (approximate regex)
+\biqn\.[0-9]{4}-[0-9]{2}(?:[\.-][a-z][a-z0-9]*)*\b
+
+# WWNN/WWPN (NAA identifiers)
+\b(?:0x)?10[0-9a-f]{14}\b|\b(?:0x|3)?[25][0-9a-f]{15}\b|\b(?:0x|3)?6[0-9a-f]{31}\b
+
 # curl arguments
-\b(?:\\n|)curl(?:\s+-[a-zA-Z]{1,2}\b)*(?:\s+-[a-zA-Z]{3,})(?:\s+-[a-zA-Z]+)*
+\b(?:\\n|)curl(?:\.exe|)(?:\s+-[a-zA-Z]{1,2}\b)*(?:\s+-[a-zA-Z]{3,})(?:\s+-[a-zA-Z]+)*
 # set arguments
-\bset(?:\s+-[abefimouxE]{1,2})*\s+-[abefimouxE]{3,}(?:\s+-[abefimouxE]+)*
+\b(?:bash|sh|set)(?:\s+[-+][abefimouxE]{1,2})*\s+[-+][abefimouxE]{3,}(?:\s+[-+][abefimouxE]+)*
 # tar arguments
 \b(?:\\n|)g?tar(?:\.exe|)(?:(?:\s+--[-a-zA-Z]+|\s+-[a-zA-Z]+|\s[ABGJMOPRSUWZacdfh-pr-xz]+\b)(?:=[^ ]*|))+
 # tput arguments -- https://man7.org/linux/man-pages/man5/terminfo.5.html -- technically they can be more than 5 chars long...
 \btput\s+(?:(?:-[SV]|-T\s*\w+)\s+)*\w{3,5}\b
 # macOS temp folders
 /var/folders/\w\w/[+\w]+/(?:T|-Caches-)/
+# github runner temp folders
+/home/runner/work/_temp/[-_/a-z0-9]+

.github/actions/spelling/excludes.txt

@@ -1,8 +1,10 @@
 # See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-excludes
 (?:^|/)(?i)COPYRIGHT
 (?:^|/)(?i)LICEN[CS]E
+(?:^|/)(?i)third[-_]?party/
 (?:^|/)3rdparty/
 (?:^|/)dirs$
+(?:^|/)generated/
 (?:^|/)go\.sum$
 (?:^|/)package(?:-lock|)\.json$
 (?:^|/)Pipfile$
@@ -10,17 +12,20 @@
 (?:^|/)requirements(?:-dev|-doc|-test|)\.txt$
 (?:^|/)sources(?:|\.dep)$
 (?:^|/)vendor/
+(?:^|/|\b)requirements(?:-dev|-doc|-test|)\.txt$
+ignore$
+Resources/(?!en)
+[^/]\.vsdx$
 \.a$
 \.ai$
 \.all-contributorsrc$
 \.avi$
 \.bmp$
 \.bz2$
-\.cer$
+\.cert?$|\.crt$
 \.class$
 \.coveragerc$
 \.crl$
-\.crt$
 \.csr$
 \.dll$
 \.docx?$
@@ -32,7 +37,6 @@
 \.gif$
 \.git-blame-ignore-revs$
 \.gitattributes$
-\.gitignore$
 \.gitkeep$
 \.graffle$
 \.gz$
@@ -41,8 +45,7 @@
 \.ipynb$
 \.jar$
 \.jks$
-\.jpeg$
-\.jpg$
+\.jpe?g$
 \.key$
 \.lib$
 \.lock$
@@ -50,8 +53,7 @@
 \.min\..
 \.mo$
 \.mod$
-\.mp3$
-\.mp4$
+\.mp[34]$
 \.o$
 \.ocf$
 \.otf$
@@ -70,8 +72,7 @@
 \.s$
 \.sig$
 \.so$
-\.svg$
-\.svgz$
+\.svgz?$
 \.sys$
 \.tar$
 \.tgz$
@@ -88,14 +89,6 @@
 \.xpm$
 \.xz$
 \.zip$
-^\.github/actions/spelling/
-^\Q.github/workflows/spelling.yml\E$
-^\Qbuild/config/release.gdnbaselines\E$
-^\Qsrc/host/ft_host/chafa.txt\E$
-^\Qsrc/host/ft_uia/run.bat\E$
-^\Qsrc/host/runft.bat\E$
-^\Qsrc/tools/lnkd/lnkd.bat\E$
-^\Qsrc/tools/pixels/pixels.bat\E$
 ^build/config/
 ^build/StoreSubmission/
 ^consolegit2gitfilters\.json$
@@ -103,9 +96,10 @@
 ^doc/reference/master-sequence-list\.csv$
 ^doc/reference/UTF8-torture-test\.txt$
 ^doc/reference/windows-terminal-logo\.ans$
-^oss/
 ^NOTICE.md
+^oss/.*?/
 ^samples/PixelShaders/Screenshots/
+^src/cascadia/TerminalSettingsEditor/SegoeFluentIconList.h$
 ^src/interactivity/onecore/BgfxEngine\.
 ^src/renderer/atlas/
 ^src/renderer/wddmcon/WddmConRenderer\.
@@ -118,7 +112,6 @@
 ^src/terminal/parser/ut_parser/run\.bat$
 ^src/tools/benchcat
 ^src/tools/ConsoleBench
-^src/tools/integrity/dirs$
 ^src/tools/integrity/packageuwp/ConsoleUWP\.appxSources$
 ^src/tools/RenderingTests/main\.cpp$
 ^src/tools/texttests/fira\.txt$
@@ -127,6 +120,17 @@
 ^src/types/ut_types/UtilsTests\.cpp$
 ^tools/ReleaseEngineering/ServicingPipeline\.ps1$
 ^XamlStyler\.json$
-ignore$
-Resources/(?!en)
+^\.github/actions/spelling/
+^\.github/workflows/spelling\d*\.yml$
 ^\.vsconfig$
+^\Qbuild/config/release.gdnbaselines\E$
+^\Qdep/WinAppDriver/EULA.rtf\E$
+^\Qdoc/reference/windows-terminal-logo.ans\E$
+^\Qsrc/host/ft_host/chafa.txt\E$
+^\Qsrc/host/ft_uia/run.bat\E$
+^\Qsrc/host/runft.bat\E$
+^\Qsrc/terminal/parser/ft_fuzzer/run.bat\E$
+^\Qsrc/terminal/parser/ft_fuzzwrapper/run.bat\E$
+^\Qsrc/tools/lnkd/lnkd.bat\E$
+^\Qsrc/tools/pixels/pixels.bat\E$
+^\Qsrc/cascadia/ut_app/FzfTests.cpp\E$

.github/actions/spelling/expect/alphabet.txt

@@ -1,38 +1,19 @@
-AAAAAABBBBBBCCC
-AAAAABBBBBBCCC
-abcd
-abcd
-ABCDEFGHIJ
-abcdefghijk
-ABCDEFGHIJKLMNOPQRS
-ABCDEFGHIJKLMNOPQRST
 ABCG
 ABE
-abf
-BBBBB
-BBBBBCCC
-BBBBCCCCC
+AZZ
+BBDM
 BBGGRR
+CBN
+cbt
+Ccc
+cch
 efg
-EFG
 efgh
-EFGh
-KLMNOQQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJ
-QQQQQQQQQQABCDEFGHIJKLMNOPQRS
-QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJKLMNOPQRSTQQQQQQQQQQ
-QQQQQQQQQQABCDEFGHIJPQRST
-QQQQQQQQQQABCDEFGHIJPQRSTQQQQQQQQQQ
+fdw
+fesb
+ffd
+FFFD
 qwerty
 qwertyuiopasdfg
-ZAAZZ
-ZABBZ
-ZBAZZ
-ZBBBZ
-ZBBZZ
 ZYXWVUT
-ZZBBZ
-ZZZBB
-ZZZBZ
-ZZZZZ
+zzf

.github/actions/spelling/line_forbidden.patterns

@@ -1,119 +1,498 @@
 # reject `m_data` as VxWorks defined it and that breaks things if it's used elsewhere
 # see [fprime](https://github.com/nasa/fprime/commit/d589f0a25c59ea9a800d851ea84c2f5df02fb529)
 # and [Qt](https://github.com/qtproject/qt-solutions/blame/fb7bc42bfcc578ff3fa3b9ca21a41e96eb37c1c7/qtscriptclassic/src/qscriptbuffer_p.h#L46)
-# \bm_data\b
+#\bm_data\b
 
+# Were you debugging using a framework with `fit()`?
 # If you have a framework that uses `it()` for testing and `fit()` for debugging a specific test,
-# you might not want to check in code where you were debugging w/ `fit()`, in which case, you might want
-# to use this:
+# you might not want to check in code where you skip all the other tests.
 #\bfit\(
 
-# s.b. anymore
+# English does not use a hyphen between adverbs and nouns
+# https://twitter.com/nyttypos/status/1894815686192685239
+(?:^|\s)[A-Z]?[a-z]+ly-(?=[a-z]{3,})(?:[.,?!]?\s|$)
+
+# Don't use `requires that` + `to be`
+# https://twitter.com/nyttypos/status/1894816551435641027
+\brequires that \w+\b[^.]+to be\b
+
+# A fully parenthetical sentence’s period goes inside the parentheses, not outside.
+# https://twitter.com/nyttypos/status/1898844061873639490
+\([A-Z][a-z]{2,}(?: [a-z]+){3,}\)\.\s
+
+# Complete sentences shouldn't be in the middle of another sentence as a parenthetical.
+(?<!\.)(?<!\betc)\.\),
+
+# Complete sentences in parentheticals should not have a space before the period.
+\s\.\)(?!.*\}\})
+
+# Should be `HH:MM:SS`
+\bHH:SS:MM\b
+
+# Should be `86400` (seconds in a standard day)
+\b84600\b(?:.*\bday\b)
+
+# Should probably be `2006-01-02` (yyyy-mm-dd)
+# Assuming that the time is being passed to https://go.dev/src/time/format.go
+\b2006-02-01\b
+
+# Should probably be `YYYYMMDD`
+\b[Yy]{4}[Dd]{2}[Mm]{2}(?!.*[Yy]{4}[Dd]{2}[Mm]{2}).*$
+
+# Should be `a priori` or `and prior`
+(?i)(?<!posteriori)\sand priori\s
+
+# Should be `a`
+\san (?=(?:[b-df-gj-np-rtv-xz]|h(?!our|sl|tml|ttp)|s(?!sh|vg))[a-z])
+
+# Should only be one of `a`, `an`, or `the`
+\b(?:(?:an?|the)\s+){2,}\b
+
+# Should only be `are` or `can`, not both
+\b(?:(?:are|can)\s+){2,}\b
+
+# Should probably be `ABCDEFGHIJKLMNOPQRSTUVWXYZ`
+(?i)(?!ABCDEFGHIJKLMNOPQRSTUVWXYZ)ABC[A-Z]{21}YZ
+
+# Should be `an`
+(?<!\b[Ii] )\bam\b
+
+# Should be `anymore`
 \bany more[,.]
 
-# s.b. GitHub
-(?<![&*.]|// |\btype )\bGithub\b(?![{)])
+# Should be `Ask`
+(?:^|[.?]\s+)As\s+[A-Z][a-z]{2,}\s[^.?]*?(?:how|if|wh\w+)\b
 
-# s.b. GitLab
-(?<![&*.]|// |\btype )\bGitlab\b(?![{)])
+# Should be `at one fell swoop`
+# and only when talking about killing, not some other completion
+# Act 4 Scene 3, Macbeth
+# https://www.opensourceshakespeare.org/views/plays/play_view.php?WorkID=macbeth&Act=4&Scene=3&Scope=scene
+\bin one fell s[lw]?oop\b
 
-# s.b. JavaScript
+# Should be `'`
+(?i)\b(?:(?:i|s?he|they|what|who|you)[`"]ll|(?:are|ca|did|do|does|ha[ds]|have|is|should|were|wo|would)n[`"]t|(?:s?he|let|that|there|what|where|who)[`"]s|(?:i|they|we|what|who|you)[`"]ve)\b
+
+# Should be `background` / `intro text` / `introduction` / `prologue` unless it's a brand or relates to _subterfuge_
+(?i)\bpretext\b
+
+# Should be `bearer`
+\b(?<=the )burden(?= of bad news\b)
+
+# Should be `branches`
+# ... unless it's really about the meal that replaces breakfast and lunch.
+\b[Bb]runches\b
+
+# Should be `briefcase`
+\bbrief-case\b
+
+# Should be `by far` or `far and away`
+\bby far and away\b
+
+# Should be `can, not only ..., ... also...`
+\bcan not only.*can also\b
+
+# Should be `cannot` (or `can't`)
+# See https://www.grammarly.com/blog/cannot-or-can-not/
+# > Don't use `can not` when you mean `cannot`. The only time you're likely to see `can not` written as separate words is when the word `can` happens to precede some other phrase that happens to start with `not`.
+# > `Can't` is a contraction of `cannot`, and it's best suited for informal writing.
+# > In formal writing and where contractions are frowned upon, use `cannot`.
+# > It is possible to write `can not`, but you generally find it only as part of some other construction, such as `not only . . . but also.`
+# - if you encounter such a case, add a pattern for that case to patterns.txt.
+\b[Cc]an not\b(?! only\b)
+
+# Should be `chart`
+(?i)\bhelm\b.*\bchard\b
+
+# Do not use `(click) here` links
+# For more information, see:
+# * https://www.w3.org/QA/Tips/noClickHere
+# * https://webaim.org/techniques/hypertext/link_text
+# * https://granicus.com/blog/why-click-here-links-are-bad/
+# * https://heyoka.medium.com/dont-use-click-here-f32f445d1021
+(?i)(?:>|\[)(?:(?:click |)here|link|(?:read |)more)(?:</|\]\()
+
+# Including "image of" or "picture of" in alt text is unnecessary.
+\balt=['"](?:an? |)(?:image|picture) of
+
+# Alt text should be short
+\balt=(?:'[^']{126,}'|"[^"]{126,}")
+
+# Should be `equals` to `is equal to`
+\bequals to\b
+
+# Should be `ECMA` 262 (JavaScript)
+(?i)\bTS\/EMCA\b|\bEMCA(?: \d|\s*Script)|\bEMCA\b(?=.*\bTS\b)
+
+# Should be `ECMA` 340 (Near Field Communications)
+(?i)EMCA[- ]340
+
+# Should be `fall back`
+(?<!\ba )(?<!\bthe )\bfallback(?= to(?! ask))\b
+
+# Should be `for`, `for, to` or `to`
+\b(?:for to|to for)\b
+
+# Should be `GitHub`
+(?<![&*.]|// |\b(?:from|import|type) )\bGithub\b(?![{()])
+
+# Should be `GitLab`
+(?<![&*.]|// |\b(?:from|import|type) )\bGitlab\b(?![{()])
+
+# Should probably be `https://`...
+# Markdown generally doesn't assume that links are to urls
+\]\(www\.\w
+
+# Should be `JavaScript`
 \bJavascript\b
 
-# s.b. macOS or Mac OS X or ...
+# Should be `macOS` or `Mac OS X` or ...
 \bMacOS\b
 
-# s.b. Microsoft
+# Should be `Microsoft`
 \bMicroSoft\b
 
-# s.b. TypeScript
+# Should be `OAuth`
+(?:^|[^-/*$])[ '"]oAuth(?: [a-z]|\d+ |[^ a-zA-Z0-9:;_.()])
+
+# Should be `RabbitMQ`
+\bRabbitmq\b
+
+# Should be `TensorFlow`
+\bTensorflow\b
+
+# Should be `TypeScript`
 \bTypescript\b
 
-# s.b. another
-\ban[- ]other\b
+# Should be `another`
+\ban[- ]other(?!-)\b
 
-# s.b. deprecation warning
+# Should be `case-(in)sensitive`
+\bcase (?:in|)sensitive\b
+
+# Should be `coinciding`
+\bco-inciding\b
+
+# Should be `deprecation warning(s)`
 \b[Dd]epreciation [Ww]arnings?\b
 
-# s.b. greater than
+# Should be `greater than`
 \bgreater then\b
 
-# s.b. in front of
+# Should be `has`
+\b[Ii]t only have\b
+
+# Should be `here-in`, `the`, `them`, `this`, `these` or reworded in some other way
+\bthe here(?:\.|,| (?!and|defined))
+
+# Should be `going to bed` or `going to a bad`
+\bgoing to bad(?!-)\b
+
+# Should be `greater than`
+#\bhigher than\b
+
+# Should be `ID` (unless it's a flag/property)
+#(?<![-\.])\bId\b(?![(])
+
+# Should be `in front of`
 \bin from of\b
 
-# s.b. into
+# Should be `into`
 # when not phrasal and when `in order to` would be wrong:
 # https://thewritepractice.com/into-vs-in-to/
 #\sin to\s(?!if\b)
 
-# s.b. is obsolete
+# Should be `use`
+\sin used by\b
+
+# Should be `in-depth` if used as an adjective (but `in depth` when used as an adverb)
+\bin depth\s(?!rather\b)\w{6,}
+
+# Should be `in-flight` or `on the fly` (unless actually talking about airline flights)
+\bon[- ]flight\b(?!=\s+(?:(?:\w{2}|)\d+|availability|booking|computer|data|delay|departure|management|performance|radar|reservation|scheduling|software|status|ticket|time|type|.*(?:hotel|taxi)))
+
+# Should be `is obsolete`
 \bis obsolescent\b
 
-# s.b. it's or its
+# Should be `it's` or `its`
 \bits['’]
 
-# s.b. opt-in
-#(?<!\sfor)\sopt in\s
+# Should be `its`
+\bit's(?= (?:child|only purpose|own(?:er|)|parent|sibling)\b)
 
-# s.b. less than
+# Should be `for its` (possessive) or `because it is`
+\bfor it(?:'s| is)\b
+
+# Should be `log in`
+\blogin to the
+
+# Should be `long-standing`
+\blong standing\b
+
+# Should be `lose`
+(?<=\bwill )loose\b
+
+# `apt-key` is deprecated
+# ... instead you should be writing a pair of files:
+# ... * the gpg key added to a distinct key ring file based on your project/distro/key...
+# ... * the sources.list in a district file -- not simply appended to `/etc/apt/sources.list` -- (there is a newer format [DEB822](https://manpages.debian.org/bookworm/dpkg-dev/deb822.5.en.html)) that references the gpg key.
+# Consider:
+# ````sh
+# curl http://download.something.example.com/$DISTRO/Release.key | \
+#     gpg --dearmor --yes --output /usr/share/keyrings/something-distro.gpg
+# echo "deb [signed-by=/usr/share/keyrings/something-distro.gpg] http://download.something.example.com/repositories/home:/$DISTRO ./" \
+#     >> /etc/apt/sources.list.d/something-distro.list
+# ````
+\bapt-key add\b
+
+# Should be `nearby`
+\bnear by\b
+
+# Should probably be a person named `Nick` or the abbreviation `NIC`
+\bNic\b
+
+# Should be `not supposed`
+\bsupposed not\b
+
+# Should probably be `much more`
+\bmore much\b
+
+# Should be `perform its`
+\bperform it's\b
+
+# Should be `opt-in`
+#(?<!\scan|for)(?<!\smust)(?<!\sif)\sopt in\s
+
+# Should be `less than`
 \bless then\b
 
-# s.b. one of
-\bon of\b
+# Should be `load balancer`
+\b[Ll]oud balancer
 
-# s.b. otherwise
+# Should be `moot`
+\bmute point\b
+
+# Should be `one of`
+(?<!-)\bon of\b
+
+# Should be `on the other hand`
+\b(?i)on another hand\b
+
+# Reword to `on at runtime` or `enabled at launch`
+# The former if you mean it can be changed dynamically.
+# The latter if you mean that it can be changed without recompiling but not after the program starts.
+\bswitched on runtime\b
+
+# Should be `Of course,`
+[?.!]\s+Of course\s(?=[-\w\s]+[.?;!,])
+
+# Most people only have two hands. Reword.
+\b(?i)on the third hand\b
+
+# Should be `Open Graph`
+# unless talking about a specific Open Graph implementation:
+# - Java
+# - Node
+# - Py
+# - Ruby
+\bOpenGraph\b
+
+# Should be `OpenShift`
+\bOpenshift\b
+
+# Should be `otherwise`
 \bother[- ]wise\b
 
-# s.b. or (more|less)
+# Should be `; otherwise` or `. Otherwise`
+# https://study.com/learn/lesson/otherwise-in-a-sentence.html
+, [Oo]therwise\b
+
+# Should probably be `Otherwise,`
+(?<=\. )Otherwise\s
+
+# Should be `or (more|less)`
 \bore (?:more|less)\b
 
-# s.b. nonexistent
+# Should be reworded.
+# `passthrough` is an adjective
+# `pass-through` could be a noun
+# `pass through` would be a verb phrase
+\b(?i)passthrough(?= an?\b)
+
+# Should be `rather than`
+\brather then\b
+
+# Should be `Red Hat`
+\bRed[Hh]at\b
+
+# Should be `regardless, ...` or `regardless of (whether)`
+\b[Rr]egardless if you\b
+
+# Should be `self-signed`
+\bself signed\b
+
+# Should be `SendGrid`
+\bSendgrid\b
+
+# Should be `set up` (`setup` is a noun / `set up` is a verb)
+\b[Ss]etup(?= (?:an?|the)\b)
+
+# Should be `state`
+\bsate(?=\b|[A-Z])|(?<=[a-z])Sate(?=\b|[A-Z])|(?<=[A-Z]{2})Sate(?=\b|[A-Z])
+
+# Should be `no longer needed`
+\bno more needed\b(?! than\b)
+
+# Should be `<see|look> below for the`
+(?i)\bfind below the\b
+
+# Should be `then any` unless there's a comparison before the `,`
+, than any\b
+
+# Should be `did not exist`
+\bwere not existent\b
+
+# Should be `nonexistent`
 \bnon existing\b
+
+# Should be `nonexistent`
 \b[Nn]o[nt][- ]existent\b
 
-# s.b. brief / details/ param / return / retval
+# Should be `our`
+\bspending out time\b
+
+# Should be `@brief` / `@details` / `@param` / `@return` / `@retval`
 (?:^\s*|(?:\*|//|/*)\s+`)[\\@](?:breif|(?:detail|detials)|(?:params(?!\.)|prama?)|ret(?:uns?)|retvl)\b
 
-# s.b. preexisting
+# Should be `more than` or `more, then`
+\bmore then\b
+
+# Should be `Pipeline`/`pipeline`
+(?:(?<=\b|[A-Z])p|P)ipeLine(?:\b|(?=[A-Z]))
+
+# Should be `preexisting`
 [Pp]re[- ]existing
 
-# s.b. preempt
+# Should be `preempt`
 [Pp]re[- ]empt\b
 
-# s.b. preemptively
+# Should be `preemptively`
 [Pp]re[- ]emptively
 
-# s.b. recently changed or recent changes
+# Should be `prepopulate`
+[Pp]re[- ]populate
+
+# Should be `prerequisite`
+[Pp]re[- ]requisite
+
+# Should be `recently changed` or `recent changes`
 [Rr]ecent changed
 
-# s.b. reentrancy
+# Should be `reentrancy`
 [Rr]e[- ]entrancy
 
-# s.b. reentrant
+# Should be `reentrant`
 [Rr]e[- ]entrant
 
-# s.b. understand
+# Should be `room for`
+\brooms for (?!lease|rent|sale)
+
+# Should be `socioeconomic`
+# https://dictionary.cambridge.org/us/dictionary/english/socioeconomic
+socio-economic
+
+# Should be `strong suit`
+\b(?:my|his|her|their) strong suite\b
+
+# Should probably be `temperatures` unless actually talking about thermal drafts (things birds may fly on)
+\bthermals\b
+
+# Should be `there are` or `they are` (or `they're`)
+(?i)\btheir are\b
+
+# Should be `understand`
 \bunder stand\b
 
-# s.b. workarounds
+# Should be `URI` or `uri` unless it refers to a person named `Uri` (or a flag)
+#(?<![-\.])\bUri\b(?![(])
+
+# Should be `it uses is`
+/\bis uses is\b/
+
+# Should be `uses it as`
+(?:^|\. |and )uses is as (?!an?\b|follows|livestock|[^.]+\s+as\b)
+
+# Should be `was`
+\bhas been(?= removed in v?\d)
+
+# Should be `where`
+\bwere they are\b
+
+# Should be `why`
+, way(?= is [^.]*\?)
+
+# should be `vCenter`
+\bV[Cc]enter\b
+
+# Should be `VM`
+\bVm\b
+
+# Should be `walkthrough(s)`
+\bwalk-throughs?\b
+
+# Should be `want`
+\bdon't ant\b
+
+# Should be `we'll`
+\bwe 'll\b
+
+# Should be `whereas`
+\bwhere as\b
+
+# Should be `WinGet`
+\bWinget\b
+
+# Should be `without` (unless `out` is a modifier of the next word)
+\bwith out\b(?!-)
+
+# Should be `work around`
+\b[Ww]orkaround(?= an?\b)
+
+# Should be `workarounds`
 #\bwork[- ]arounds\b
 
-# s.b. workaround
+# Should be `workaround`
 (?:(?:[Aa]|[Tt]he|ugly)\swork[- ]around\b|\swork[- ]around\s+for)
 
-# s.b. (coarse|fine)-grained
+# Should be `workaround`
+\b[Ww]alk[- ]around\b
+
+# Should be `worst`
+(?i)worse-case
+
+# Should be `you are not` or reworded
+\byour not\b
+
+# Should be `(coarse|fine)-grained`
 \b(?:coarse|fine) grained\b
 
-# s.b. neither/nor -- or reword
-#\bnot\b[^.?!"/(]+\bnor\b
+# Homoglyph (Cyrillic) should be `A`/`B`/`C`/`E`/`H`/`I`/`I`/`J`/`K`/`M`/`O`/`P`/`S`/`T`/`Y`
+# It's possible that your content is intentionally mixing Cyrillic and Latin scripts, but if it isn't, you definitely want to correct this.
+(?<=[A-Z]{2})[АВСЕНІӀЈКМОРЅТУ]|[АВСЕНІӀЈКМОРЅТУ](?=[A-Z]+(?:\b|[a-z]+)|[a-z]+(?:[^a-z]|$))
 
-# probably a double negative
-# s.b. neither/nor (plus rewording the beginning)
-\bnot\b[^.?!"/]*\bneither\b[^.?!"/(]*\bnor\b
+# Homoglyph (Cyrillic) should be `a`/`b`/`c`/`e`/`o`/`p`/`x`/`y`
+# It's possible that your content is intentionally mixing Cyrillic and Latin scripts, but if it isn't, you definitely want to correct this.
+[авсеорху](?=[A-Za-z]{2,})|(?<=[A-Za-z]{2})[авсеорху]|(?<=[A-Za-z])[авсеорху](?=[A-Za-z])
 
-# In English, it is generally wrong to have the same word twice in a row without punctuation.
-# Duplicated words are generally mistakes.
-# There are a few exceptions where it is acceptable (e.g. "that that").
-# If the highlighted doubled word pair is in a code snippet, you can write a pattern to mask it.
-# If the highlighted doubled word pair is in prose, have someone read the English before you dismiss this error.
+# Should be `neither/nor` -- or reword
+#(?!<do )\bnot\b([^.?!"/(](?!neither|,.*?,))+\bnor\b
+
+# Should be `neither/nor` (plus rewording the beginning)
+# This is probably a double negative...
+\bnot\b[^.?!"/(]*\bneither\b[^.?!"/(]*\bnor\b
+
+# In English, duplicated words are generally mistakes
+# There are a few exceptions (e.g. "that that").
+# If the highlighted doubled word pair is in:
+# * code, write a pattern to mask it.
+# * prose, have someone read the English before you dismiss this error.
 \s([A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})\s\g{-1}\s

.github/actions/spelling/patterns/patterns.txt

@@ -1,5 +1,165 @@
 # See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns
 
+# Windows accelerators
+\b[A-Z][a-z]*&[a-z]+(?!;)\b
+
+# charsets.hpp
+\{ L.*\}, // (?:Cyrillic|Greek|Hebrew).*
+
+# Screen buffer tests
+\bQQ[A-Z]+\s*[A-Z]*Q+\b
+
+# Unicode references
+(?<=\W)(?:U\+?|)[0-9A-F]+b?\b
+
+# Verify
+VERIFY_IS_TRUE\(.*\)
+
+# TEST_METHOD(ApiScrollConsoleScreenBufferW)
+\bZ[A-Z]+$
+
+# TerminalApiTest
+stateMachine\.ProcessString\(L".*"
+
+# bundles
+[0-9a-z]+\\?\.msixbundle
+
+# text file names
+"[a-z]+\.txt"
+
+# Checksum
+L"[0-9A-F]{4}"
+
+# Direct 2D/3D
+\b(?:d[23]d(?=[a-z])|D[23]D(?=[A-Z]))
+
+# x86/x64
+(?<=[a-z])x(?:86|64)
+
+# Windows Resources with accelerators
+\b[A-Z]&[a-z]+\b(?!;)
+
+# Automatically suggested patterns
+
+# hit-count: 3904 file-count: 577
+# IServiceProvider / isAThing
+(?:(?:\b|_|(?<=[a-z]))[IT]|(?:\b|_)(?:nsI|isA))(?=(?:[A-Z][a-z]{2,})+(?:[A-Z\d]|\b))
+
+# hit-count: 2437 file-count: 826
+# #includes
+^\s*#include\s*(?:<.*?>|".*?")
+
+# hit-count: 1131 file-count: 326
+# C# includes
+^\s*using [^;]+;
+
+# hit-count: 128 file-count: 47
+# C network byte conversions
+(?:\d|\bh)to(?!ken)(?=[a-z])|to(?=[adhiklpun]\()
+
+# hit-count: 53 file-count: 10
+# ANSI color codes
+(?:\\(?:u00|x)1[Bb]|\\03[1-7]|\x1b|\\u\{1[Bb]\})\[\d+(?:;\d+)*m
+
+# hit-count: 45 file-count: 29
+# version suffix <word>v#
+(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
+
+# hit-count: 30 file-count: 19
+# uuid:
+\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
+
+# hit-count: 17 file-count: 7
+# File extensions
+\*\.[+\w]+,
+
+# hit-count: 15 file-count: 9
+# Markdown anchor links
+\(#\S*?[a-zA-Z]\S*?\)
+
+# hit-count: 14 file-count: 8
+# hex runs
+\b[0-9a-fA-F]{16,}\b
+
+# hit-count: 12 file-count: 8
+# hex digits including css/html color classes:
+(?:[\\0][xX]|\\u|[uU]\+|#x?|%23|&H)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|[iu]\d+)\b
+
+# hit-count: 12 file-count: 7
+# tar arguments
+\b(?:\\n|)g?tar(?:\.exe|)(?:(?:\s+--[-a-zA-Z]+|\s+-[a-zA-Z]+|\s[ABGJMOPRSUWZacdfh-pr-xz]+\b)(?:=[^ ]*|))+
+
+# hit-count: 9 file-count: 6
+# Repeated letters
+\b([a-z])\g{-1}{2,}\b
+
+# hit-count: 8 file-count: 2
+# regex choice
+\(\?:[^)]+\|[^)]+\)
+
+# hit-count: 8 file-count: 1
+# latex (check-spelling >= 0.0.22)
+\\\w{2,}\{
+
+# hit-count: 7 file-count: 4
+# Python string prefix / binary prefix
+# Note that there's a high false positive rate, remove the `?=` and search for the regex to see if the matches seem like reasonable strings
+(?<!['"])\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)['"](?=[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
+
+# hit-count: 5 file-count: 3
+# Alternatively, if you're using check-spelling v0.0.25+, and you would like to _check_ the Non-English content for spelling errors, you can. For information on how to do so, see:
+# https://docs.check-spelling.dev/Feature:-Configurable-word-characters.html#unicode
+[a-zA-Z]*[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*|[a-zA-Z]{3,}[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]|[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3,}
+
+# hit-count: 3 file-count: 3
+# mailto urls
+mailto:[-a-zA-Z=;:/?%&0-9+@._]{3,}
+
+# hit-count: 2 file-count: 2
+# Alternative printf
+# %s
+%(?:s(?=[a-z]{2,}))(?!%)(?=[_a-zA-Z]+(?!%[^s])\b)(?=.*?['"])
+
+# hit-count: 2 file-count: 1
+# kubernetes crd patterns
+^\s*pattern: .*$
+
+# hit-count: 1 file-count: 1
+# css fonts
+\bfont(?:-family|):[^;}]+
+
+# hit-count: 1 file-count: 1
+# microsoft
+\b(?:https?://|)(?:(?:(?:blogs|download\.visualstudio|docs|msdn2?|research)\.|)microsoft|blogs\.msdn)\.co(?:m|\.\w\w)/[-_a-zA-Z0-9()=./%]*
+
+# hit-count: 1 file-count: 1
+# Punycode
+\bxn--[-0-9a-z]+
+
+# hit-count: 1 file-count: 1
+# sha-... -- uses a fancy capture
+(\\?['"]|&quot;)[0-9a-f]{40,}\g{-1}
+
+# hit-count: 1 file-count: 1
+# Docker images
+^\s*(?i)FROM\s+\S+:\S+(?:\s+AS\s+\S+|)
+
+# hit-count: 1 file-count: 1
+# WWNN/WWPN (NAA identifiers)
+\b(?:0x)?10[0-9a-f]{14}\b|\b(?:0x|3)?[25][0-9a-f]{15}\b|\b(?:0x|3)?6[0-9a-f]{31}\b
+
+# hit-count: 1 file-count: 1
+# curl arguments
+\b(?:\\n|)curl(?:\.exe|)(?:\s+-[a-zA-Z]{1,2}\b)*(?:\s+-[a-zA-Z]{3,})(?:\s+-[a-zA-Z]+)*
+
+# hit-count: 1 file-count: 1
+# tput arguments -- https://man7.org/linux/man-pages/man5/terminfo.5.html -- technically they can be more than 5 chars long...
+\btput\s+(?:(?:-[SV]|-T\s*\w+)\s+)*\w{3,5}\b
+
+# bug in check-spelling v0.0.24 (fixed later)
+\bok'd\b
+
+
 https?://\S+
 [Pp]ublicKeyToken="?[0-9a-fA-F]{16}"?
 (?:[{"]|UniqueIdentifier>)[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}(?:[}"]|</UniqueIdentifier)
@@ -30,24 +190,11 @@ ROY\sG\.\sBIV
 # ARM NEON intrinsics like "vsubq_u16"
 \bv\w+_[fsu](?:8|16|32|64)\b
 
-# color floating numbers
-0x[0-9a-f](?:\.[0-9a-f]*p)[-+]\d+f
-
 # AppX package
 _\d[0-9a-z]{12}['\.]
 
 # string test
 equals_insensitive_ascii\("\w+", "\w+"
-
-# Automatically suggested patterns
-# hit-count: 3788 file-count: 599
-# IServiceProvider / isAThing
-\b(?:I|isA)(?=(?:[A-Z][a-z]{2,})+\b)
-
-# hit-count: 314 file-count: 21
-# hex runs
-\b[0-9a-fA-F]{16,}\b
-
 # hit-count: 47 file-count: 11
 # special cased printf markers
 \\r\\n(?=[a-z])|(?<!\\)\\[nrt](?=[a-z]{2,})(?=.*(?:<.*['"`]|"(?:[;,]|\);)$|\) \+$))
@@ -55,98 +202,43 @@ equals_insensitive_ascii\("\w+", "\w+"
 # ConsoleArgumentsTests
 --headless\\.*?"
 
-# hit-count: 109 file-count: 62
-# Compiler flags (Unix, Java/Scala)
-# Use if you have things like `-Pdocker` and want to treat them as `docker`
-(?:^|[\t ,>"'`=(])-(?:D(?=[A-Z])|[WX]|f(?=[ms]))(?=[A-Z]{2,}|[A-Z][a-z]|[a-z]{2,})
-
-# hit-count: 60 file-count: 35
-# version suffix <word>v#
-(?:(?<=[A-Z]{2})V|(?<=[a-z]{2}|[A-Z]{2})v)\d+(?:\b|(?=[a-zA-Z_]))
-
-# hit-count: 2 file-count: 2
-# This does not cover multiline strings, if your repository has them,
-# you'll want to remove the `(?=.*?")` suffix.
-# The `(?=.*?")` suffix should limit the false positives rate
-# printf
-%(?:s)(?!ize)(?=[a-z]{2,})
-
-# hit-count: 16 file-count: 10
-# uuid:
-\b[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{12}\b
-
-# hit-count: 13 file-count: 4
-# Non-English
-[a-zA-Z]*[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3}[a-zA-ZÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]*|[a-zA-Z]{3,}[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź]|[ÀÁÂÃÄÅÆČÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝßàáâãäåæčçèéêëìíîïðñòóôõöøùúûüýÿĀāŁłŃńŅņŒœŚśŠšŜŝŸŽžź][a-zA-Z]{3,}
-
-# hit-count: 7 file-count: 5
-# hex digits including css/html color classes:
-(?:[\\0][xX]|\\u|[uU]\+|#x?|\%23)[0-9_a-fA-FgGrR]*?[a-fA-FgGrR]{2,}[0-9_a-fA-FgGrR]*(?:[uUlL]{0,3}|[iu]\d+)\b
-
-# hit-count: 7 file-count: 1
-# regex choice
-\(\?:[^)]+\|[^)]+\)
-
-# hit-count: 4 file-count: 4
-# tar arguments
-\b(?:\\n|)g?tar(?:\.exe|)(?:(?:\s+--[-a-zA-Z]+|\s+-[a-zA-Z]+|\s[ABGJMOPRSUWZacdfh-pr-xz]+\b)(?:=[^ ]*|))+
-
-# hit-count: 4 file-count: 1
-# ANSI color codes
-(?:\\(?:u00|x)1[Bb]|\x1b|\\u\{1[Bb]\})\[\d+(?:;\d+|)m
-
-# hit-count: 4 file-count: 1
-# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
-# grep '^[^#].*lorem' .github/actions/spelling/patterns.txt|perl -pne 's/.*i..\?://;s/\).*//' |tr '|' "\n"|sort -f |xargs -n1 ge|perl -pne 's/^[^:]*://'|sort -u|w|sed -e 's/ .*//'|w|review -
-# Warning, while `(?i)` is very neat and fancy, if you have some binary files that aren't proper unicode, you might run into:
-## Operation "substitution (s///)" returns its argument for non-Unicode code point 0x1C19AE (the code point will vary).
-## You could manually change `(?i)X...` to use `[Xx]...`
-## or you could add the files to your `excludes` file (a version after 0.0.19 should identify the file path)
-# Lorem
-(?:\w|\s|[,.])*\b(?i)(?:amet|consectetur|cursus|dolor|eros|ipsum|lacus|libero|ligula|lorem|magna|neque|nulla|suscipit|tempus)\b(?:\w|\s|[,.])*
-
-# hit-count: 3 file-count: 3
-# mailto urls
-mailto:[-a-zA-Z=;:/?%&0-9+@.]{3,}
-
-# hit-count: 2 file-count: 1
-# Python string prefix / binary prefix
-# Note that there's a high false positive rate, remove the `?=` and search for the regex to see if the matches seem like reasonable strings
-(?<!')\b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'(?=[A-Z]{3,}|[A-Z][a-z]{2,}|[a-z]{3,})
-
-# hit-count: 1 file-count: 1
-# Punycode
-\bxn--[-0-9a-z]+
-
-# hit-count: 1 file-count: 1
-# latex (check-spelling >= 0.0.22)
-\\\w{2,}\{
-
-# hit-count: 1 file-count: 1
-# tput arguments -- https://man7.org/linux/man-pages/man5/terminfo.5.html -- technically they can be more than 5 chars long...
-\btput\s+(?:(?:-[SV]|-T\s*\w+)\s+)*\w{3,5}\b
 
 # Questionably acceptable forms of `in to`
 # Personally, I prefer `log into`, but people object
 # https://www.tprteaching.com/log-into-log-in-to-login/
-\b(?:[Ll]og|[Ss]ign) in to\b
+\b(?:(?:[Ll]og(?:g(?=[a-z])|)|[Ss]ign)(?:ed|ing)?) in to\b
 
 # to opt in
 \bto opt in\b
 
+# pass(ed|ing) in
+\bpass(?:ed|ing) in\b
+
 # acceptable duplicates
 # ls directory listings
-[-bcdlpsw](?:[-r][-w][-Ssx]){3}\s+\d+\s+\S+\s+\S+\s+\d+\s+
+[-bcdlpsw](?:[-r][-w][-SsTtx]){3}[\.+*]?\s+\d+\s+\S+\s+\S+\s+[.\d]+(?:[KMGT]|)\s+
 # mount
 \bmount\s+-t\s+(\w+)\s+\g{-1}\b
-# C types and repeated CSS values
-\s(auto|center|div|Guid|inherit|long|LONG|none|normal|solid|that|thin|transparent|very)(?: \g{-1})+\s
-# C struct
-\bstruct\s+(\w+)\s+\g{-1}\b
+# C/idl types, repeated CSS values, + English ...
+\s(auto|buffalo|center|div|Guid|GUID|inherit|long|LONG|none|normal|solid|that|thin|transparent|very)(?: \g{-1})+\s
+# C enum and struct
+\b(?:enum|struct)\s+(\w+)\s+\g{-1}\b
 # go templates
 \s(\w+)\s+\g{-1}\s+\`(?:graphql|inject|json|yaml):
 # doxygen / javadoc / .net
-(?:[\\@](?:brief|groupname|t?param|return|retval)|(?:public|private|\[Parameter(?:\(.+\)|)\])(?:\s+static|\s+override|\s+readonly)*)(?:\s+\{\w+\}|)\s+(\w+)\s+\g{-1}\s
+(?:[\\@](?:brief|defgroup|groupname|link|t?param|return|retval)|(?:public|private|\[Parameter(?:\(.+\)|)\])(?:\s+(?:static|override|readonly|required|virtual))*)(?:\s+\{\w+\}|)\s+(\w+)\s+\g{-1}\s
+
+# macOS file path
+(?:Contents\W+|(?!iOS)/)MacOS\b
+
+# Python package registry has incorrect spelling for macOS / Mac OS X
+"Operating System :: MacOS :: MacOS X"
+
+# "company" in Germany
+\bGmbH\b
+
+# IntelliJ
+\bIntelliJ\b
 
 # Commit message -- Signed-off-by and friends
 ^\s*(?:(?:Based-on-patch|Co-authored|Helped|Mentored|Reported|Reviewed|Signed-off)-by|Thanks-to): (?:[^<]*<[^>]*>|[^<]*)\s*$

.github/actions/spelling/reject.txt

@@ -1,13 +1,25 @@
 ^attache$
 ^attacher$
 ^attachers$
-^bellow$
+^bellow?$
 benefitting
 occurences?
 ^dependan.*
+^develope$
+^developement$
+^developpe
+^Devers?$
+^devex
+^devide
+^Devinn?[ae]
+^devisal
+^devisor
+^diables?$
 ^oer$
 Sorce
 ^[Ss]pae.*
+^Teh$
 ^untill$
 ^untilling$
+^venders?$
 ^wether.*

.github/policies/resourceManagement.yml

@@ -8,7 +8,7 @@ where:
 configuration:
   resourceManagementConfiguration:
     scheduledSearches:
-    - description: 
+    - description: '"Needs-Author-Feedback" and "No-Recent-Activity" issues are closed after 3 days of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -23,7 +23,7 @@ configuration:
           days: 3
       actions:
       - closeIssue
-    - description: 
+    - description: '"Needs-Author-Feedback" issues are labelled "No-Recent-Activity" after 4 days of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -41,7 +41,7 @@ configuration:
           label: No-Recent-Activity
       - addReply:
           reply: This issue has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **4 days**. It will be closed if no further activity occurs **within 3 days of this comment**.
-    - description: 
+    - description: '"Resolution-Duplicate" issues are closed after 1 day of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -56,7 +56,7 @@ configuration:
       - addReply:
           reply: This issue has been marked as duplicate and has not had any activity for **1 day**. It will be closed for housekeeping purposes.
       - closeIssue
-    - description: 
+    - description: '"Needs-Author-Feedback" and "No-Recent-Activity" PRs are closed after 7 days of inactivity'
       frequencies:
       - hourly:
           hour: 3
@@ -71,7 +71,7 @@ configuration:
           days: 7
       actions:
       - closeIssue
-    - description: 
+    - description: Add "No-Recent-Activity" label to PRs with "Needs-Author-Feedback" label after 7 days of inactivity
       frequencies:
       - hourly:
           hour: 3
@@ -90,7 +90,8 @@ configuration:
       - addReply:
           reply: This pull request has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **7 days**. It will be closed if no further activity occurs **within 7 days of this comment**.
     eventResponderTasks:
-    - if:
+    - description: Add "Needs-Triage" to new issues
+      if:
       - payloadType: Issues
       - or:
         - and:
@@ -102,8 +103,8 @@ configuration:
       then:
       - addLabel:
           label: Needs-Triage
-      description: 
-    - if:
+    - description: Replace "Needs-Author-Feedback" with "Needs-Attention" when author comments
+      if:
       - payloadType: Issue_Comment
       - isAction:
           action: Created
@@ -116,8 +117,8 @@ configuration:
           label: Needs-Attention
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when closing an issue
+      if:
       - payloadType: Issues
       - not:
           isAction:
@@ -127,16 +128,16 @@ configuration:
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when someone comments on an issue
+      if:
       - payloadType: Issue_Comment
       - hasLabel:
           label: No-Recent-Activity
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Add "Needs-Author-Feedback" when changes are requested on a PR
+      if:
       - payloadType: Pull_Request_Review
       - isAction:
           action: Submitted
@@ -145,8 +146,8 @@ configuration:
       then:
       - addLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "Needs-Author-Feedback" when author performs activity on their PR
+      if:
       - payloadType: Pull_Request
       - isActivitySender:
           issueAuthor: True
@@ -158,8 +159,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "Needs-Author-Feedback" when author comments on their issue
+      if:
       - payloadType: Issue_Comment
       - isActivitySender:
           issueAuthor: True
@@ -168,8 +169,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "Needs-Author-Feedback" when the author reviews the PR
+      if:
       - payloadType: Pull_Request_Review
       - isActivitySender:
           issueAuthor: True
@@ -178,8 +179,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity"" when activity occurs on the PR (aside from closing it)
+      if:
       - payloadType: Pull_Request
       - not:
           isAction:
@@ -189,39 +190,39 @@ configuration:
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when someone comments on the PR
+      if:
       - payloadType: Issue_Comment
       - hasLabel:
           label: No-Recent-Activity
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Remove "No-Recent-Activity" when someone reviews the PR
+      if:
       - payloadType: Pull_Request_Review
       - hasLabel:
           label: No-Recent-Activity
       then:
       - removeLabel:
           label: No-Recent-Activity
-      description: 
-    - if:
+    - description: Enable auto-merge on PRs with the "AutoMerge" label
+      if:
       - payloadType: Pull_Request
       - hasLabel:
           label: AutoMerge
       then:
       - enableAutoMerge:
           mergeMethod: Squash
-      description: 
-    - if:
+    - description: Disable auto-merge on PRs when the "AutoMerge" label is removed
+      if:
       - payloadType: Pull_Request
       - labelRemoved:
           label: AutoMerge
       then:
       - disableAutoMerge
-      description: 
-    - if:
+    - description: Add "Needs-Tag-Fix" label to issues without an Area, Issue, or Product label
+      if:
       - payloadType: Issues
       - or:
         - and:
@@ -238,15 +239,45 @@ configuration:
           - not:
               hasLabel:
                 label: Area-Accessibility
+          - not:
+              hasLabel:
+                label: Area-AtlasEngine
+          - not:
+              hasLabel:
+                label: Area-AzureShell
           - not:
               hasLabel:
                 label: Area-Build
+          - not:
+              hasLabel:
+                label: Area-Chat
+          - not:
+              hasLabel:
+                label: Area-CmdPal
+          - not:
+              hasLabel:
+                label: Area-CodeHealth
+          - not:
+              hasLabel:
+                label: Area-Commandline
+          - not:
+              hasLabel:
+                label: Area-CookedRead
+          - not:
+              hasLabel:
+                label: Area-DefApp
           - not:
               hasLabel:
                 label: Area-Extensibility
           - not:
               hasLabel:
                 label: Area-Fonts
+          - not:
+              hasLabel:
+                label: Area-GroupPolicy
+          - not:
+              hasLabel:
+                label: Area-i18n
           - not:
               hasLabel:
                 label: Area-Input
@@ -256,21 +287,45 @@ configuration:
           - not:
               hasLabel:
                 label: Area-Interop
+          - not:
+              hasLabel:
+                label: Area-Localization
           - not:
               hasLabel:
                 label: Area-Output
           - not:
               hasLabel:
                 label: Area-Performance
+          - not:
+              hasLabel:
+                label: Area-Portable
+          - not:
+              hasLabel:
+                label: Area-Quality
+          - not:
+              hasLabel:
+                label: Area-Remoting
           - not:
               hasLabel:
                 label: Area-Rendering
+          - not:
+              hasLabel:
+                label: Area-Schema
           - not:
               hasLabel:
                 label: Area-Server
           - not:
               hasLabel:
                 label: Area-Settings
+          - not:
+              hasLabel:
+                label: Area-SettingsUI
+          - not:
+              hasLabel:
+                label: Area-ShellExtension
+          - not:
+              hasLabel:
+                label: Area-Suggestions
           - not:
               hasLabel:
                 label: Area-TerminalConnection
@@ -279,49 +334,19 @@ configuration:
                 label: Area-TerminalControl
           - not:
               hasLabel:
-                label: Area-User Interface
+                label: Area-Theming
+          - not:
+              hasLabel:
+                label: Area-UserInterface
           - not:
               hasLabel:
                 label: Area-VT
-          - not:
-              hasLabel:
-                label: Area-CodeHealth
-          - not:
-              hasLabel:
-                label: Area-Quality
-          - not:
-              hasLabel:
-                label: Area-AzureShell
-          - not:
-              hasLabel:
-                label: Area-Schema
-          - not:
-              hasLabel:
-                label: Area-Commandline
-          - not:
-              hasLabel:
-                label: Area-ShellExtension
-          - not:
-              hasLabel:
-                label: Area-WPFControl
-          - not:
-              hasLabel:
-                label: Area-Settings UI
-          - not:
-              hasLabel:
-                label: Area-DefApp
-          - not:
-              hasLabel:
-                label: Area-Remoting
           - not:
               hasLabel:
                 label: Area-Windowing
           - not:
               hasLabel:
-                label: Area-Theming
-          - not:
-              hasLabel:
-                label: Area-Localization
+                label: Area-WPFControl
         - and:
           - not:
               hasLabel:
@@ -408,8 +433,8 @@ configuration:
       then:
       - addLabel:
           label: Needs-Tag-Fix
-      description: 
-    - if:
+    - description: Remove "Needs-Tag-Fix" label when an issue is tagged with an Area, Issue, and Product label
+      if:
       - payloadType: Issues
       - and:
         - isLabeled
@@ -417,66 +442,117 @@ configuration:
             label: Needs-Tag-Fix
       - and:
         - or:
-          - hasLabel:
-              label: Area-Accessibility
-          - hasLabel:
-              label: Area-Build
-          - hasLabel:
-              label: Area-Extensibility
-          - hasLabel:
-              label: Area-Fonts
-          - hasLabel:
-              label: Area-Input
-          - hasLabel:
-              label: Area-Interaction
-          - hasLabel:
-              label: Area-Interop
-          - hasLabel:
-              label: Area-Output
-          - hasLabel:
-              label: Area-Performance
-          - hasLabel:
-              label: Area-Rendering
-          - hasLabel:
-              label: Area-Server
-          - hasLabel:
-              label: Area-Settings
-          - hasLabel:
-              label: Area-TerminalConnection
-          - hasLabel:
-              label: Area-TerminalControl
-          - hasLabel:
-              label: Area-User Interface
-          - hasLabel:
-              label: Area-VT
-          - hasLabel:
-              label: Area-CodeHealth
-          - hasLabel:
-              label: Area-Quality
-          - hasLabel:
-              label: Area-Schema
-          - hasLabel:
-              label: Area-AzureShell
-          - hasLabel:
-              label: Area-Commandline
-          - hasLabel:
-              label: Area-ShellExtension
-          - hasLabel:
-              label: Area-WPFControl
-          - hasLabel:
-              label: Area-Settings UI
-          - hasLabel:
-              label: Area-DefApp
-          - hasLabel:
-              label: Area-Localization
-          - hasLabel:
-              label: Area-Windowing
-          - hasLabel:
-              label: Area-Theming
-          - hasLabel:
-              label: Area-AtlasEngine
-          - hasLabel:
-              label: Area-CmdPal
+          - not:
+              hasLabel:
+                label: Area-Accessibility
+          - not:
+              hasLabel:
+                label: Area-AtlasEngine
+          - not:
+              hasLabel:
+                label: Area-AzureShell
+          - not:
+              hasLabel:
+                label: Area-Build
+          - not:
+              hasLabel:
+                label: Area-Chat
+          - not:
+              hasLabel:
+                label: Area-CmdPal
+          - not:
+              hasLabel:
+                label: Area-CodeHealth
+          - not:
+              hasLabel:
+                label: Area-Commandline
+          - not:
+              hasLabel:
+                label: Area-CookedRead
+          - not:
+              hasLabel:
+                label: Area-DefApp
+          - not:
+              hasLabel:
+                label: Area-Extensibility
+          - not:
+              hasLabel:
+                label: Area-Fonts
+          - not:
+              hasLabel:
+                label: Area-GroupPolicy
+          - not:
+              hasLabel:
+                label: Area-i18n
+          - not:
+              hasLabel:
+                label: Area-Input
+          - not:
+              hasLabel:
+                label: Area-Interaction
+          - not:
+              hasLabel:
+                label: Area-Interop
+          - not:
+              hasLabel:
+                label: Area-Localization
+          - not:
+              hasLabel:
+                label: Area-Output
+          - not:
+              hasLabel:
+                label: Area-Performance
+          - not:
+              hasLabel:
+                label: Area-Portable
+          - not:
+              hasLabel:
+                label: Area-Quality
+          - not:
+              hasLabel:
+                label: Area-Remoting
+          - not:
+              hasLabel:
+                label: Area-Rendering
+          - not:
+              hasLabel:
+                label: Area-Schema
+          - not:
+              hasLabel:
+                label: Area-Server
+          - not:
+              hasLabel:
+                label: Area-Settings
+          - not:
+              hasLabel:
+                label: Area-SettingsUI
+          - not:
+              hasLabel:
+                label: Area-ShellExtension
+          - not:
+              hasLabel:
+                label: Area-Suggestions
+          - not:
+              hasLabel:
+                label: Area-TerminalConnection
+          - not:
+              hasLabel:
+                label: Area-TerminalControl
+          - not:
+              hasLabel:
+                label: Area-Theming
+          - not:
+              hasLabel:
+                label: Area-UserInterface
+          - not:
+              hasLabel:
+                label: Area-VT
+          - not:
+              hasLabel:
+                label: Area-Windowing
+          - not:
+              hasLabel:
+                label: Area-WPFControl
         - or:
           - hasLabel:
               label: Issue-Bug
@@ -533,14 +609,14 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Tag-Fix
-      description: 
-    - if:
+    - description: Add "In-PR" label to issues that are referenced in a PR
+      if:
       - payloadType: Pull_Request
       then:
       - inPrLabel:
           label: In-PR
-      description: 
-    - if:
+    - description: Remove "Needs-Tag-Fix" label when an issue also has the "Resolution-Duplicate" label
+      if:
       - payloadType: Issues
       - hasLabel:
           label: Needs-Tag-Fix
@@ -549,8 +625,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Tag-Fix
-      description: 
-    - if:
+    - description: Close issues that are opened and have the template title
+      if:
       - payloadType: Issues
       - or:
         - titleContains:
@@ -576,8 +652,8 @@ configuration:
           label: Needs-Author-Feedback
       - addReply:
           reply: Hi! Thanks for attempting to open an issue. Unfortunately, your title wasn't changed from the original template which makes it very hard for us to track and triage. You are welcome to fix up the title and try again with a new issue.
-      description: 
-    - if:
+    - description: Close issues that are opened and have no body
+      if:
       - payloadType: Issues
       - or:
         - isAction:
@@ -595,8 +671,8 @@ configuration:
           label: Needs-Author-Feedback
       - addReply:
           reply: "Hi! Thanks for attempting to open an issue. Unfortunately, you didn't write anything in the body which makes it impossible to understand your concern. You are welcome to fix up the issue and try again by opening another issue with the body filled out. "
-      description: 
-    - if:
+    - description: Request a review from the team when a PR is labeled "Needs-Second"
+      if:
       - payloadType: Pull_Request
       - isLabeled
       - hasLabel:
@@ -613,8 +689,8 @@ configuration:
           reviewer: dhowett
       - requestReview:
           reviewer: lhecker
-      description: 
-    - if:
+    - description: Remove "Needs-Second" label when a PR is reviewed
+      if:
       - payloadType: Pull_Request_Review
       - not: isOpen
       - hasLabel:
@@ -622,8 +698,8 @@ configuration:
       then:
       - removeLabel:
           label: Needs-Second
-      description: 
-    - if:
+    - description: Remove "Help-Wanted" label from issues that are in a PR
+      if:
       - payloadType: Issues
       - hasLabel:
           label: In-PR
@@ -633,8 +709,8 @@ configuration:
       then:
       - removeLabel:
           label: Help-Wanted
-      description: 
-    - if:
+    - description: Comments with "/dup", "/dupe", or "/duplicate" will close the issue as a duplicate and remove "Needs-" labels
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: '\/dup(licate|e)?(\s+of)?\s+\#[\d]+'
@@ -662,8 +738,8 @@ configuration:
           label: Needs-Repro
       - removeLabel:
           label: Needs-Second
-      description: 
-    - if:
+    - description: Comments with "/feedback" will direct people to Feedback Hub
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: '\/feedback'
@@ -680,13 +756,13 @@ configuration:
             Hi there!<br><br>Can you please send us feedback with the [Feedback Hub](https://support.microsoft.com/en-us/windows/send-feedback-to-microsoft-with-the-feedback-hub-app-f59187f8-8739-22d6-ba93-f66612949332) with this issue? Make sure to click the "Start recording" button, then reproduce the issue before submitting the feedback. Once it's submitted, paste the link here so we can more easily find your crash information on the back end?<br><br>Thanks!<br><br>![image](https://user-images.githubusercontent.com/18356694/140811502-a068f78b-89d2-4587-925a-73e19652b830.png)<br><br>![image](https://user-images.githubusercontent.com/18356694/140811557-cdc22a0f-fa6a-4f6a-953e-73b51f5548a3.png)<br><br>![image](https://user-images.githubusercontent.com/18221333/62478649-6de55400-b760-11e9-806e-5aab7e085a9f.png)
       - addLabel:
           label: Needs-Author-Feedback
-      description: 
-    - if:
+    - description: Comments clean the email reply
+      if:
       - payloadType: Issue_Comment
       then:
       - cleanEmailReply
-      description: 
-    - if:
+    - description: Sync labels when a PR event occurs
+      if:
       - payloadType: Pull_Request
       then:
       - labelSync:
@@ -701,8 +777,8 @@ configuration:
           pattern: Severity-
       - labelSync:
           pattern: Impact-
-      description: 
-    - if:
+    - description: Comments with "/dup", "/dupe", or "/duplicate" targeting another repo will close the issue as a duplicate and remove "Needs-" labels
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: '\/dup(licate|e)?(\s+of)?\s+https'
@@ -730,8 +806,8 @@ configuration:
           label: Needs-Repro
       - removeLabel:
           label: Needs-Second
-      description: 
-    - if:
+    - description: Comments with "/?" will replace the "Needs-Attention" label with "Needs-Author-Feedback"
+      if:
       - payloadType: Issue_Comment
       - commentContains:
           pattern: /?
@@ -746,6 +822,5 @@ configuration:
           label: Needs-Attention
       - addLabel:
           label: Needs-Author-Feedback
-      description: 
 onFailure: 
 onSuccess: 

.github/workflows/spelling2.yml

@@ -34,14 +34,14 @@ name: Spell checking
 #
 #   For background, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Update-with-deploy-key
 
-# Sarif reporting
+# SARIF reporting
 #
-# Access to Sarif reports is generally restricted (by GitHub) to members of the repository.
+# Access to SARIF reports is generally restricted (by GitHub) to members of the repository.
 #
 # Requires enabling `security-events: write`
 # and configuring the action with `use_sarif: 1`
 #
-#   For information on the feature, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-Sarif-output
+#   For information on the feature, see: https://github.com/check-spelling/check-spelling/wiki/Feature:-SARIF-output
 
 # Minimal workflow structure:
 #
@@ -60,23 +60,23 @@ name: Spell checking
 on:
   push:
     branches:
-    - "**"
+      - "**"
     tags-ignore:
-    - "**"
+      - "**"
   pull_request_target:
     branches:
-    - "**"
+      - "**"
     types:
-    - 'opened'
-    - 'reopened'
-    - 'synchronize'
+      - "opened"
+      - "reopened"
+      - "synchronize"
   issue_comment:
     types:
-    - 'created'
+      - "created"
 
 jobs:
   spelling:
-    name: Spell checking
+    name: Check Spelling
     permissions:
       contents: read
       pull-requests: read
@@ -91,52 +91,56 @@ jobs:
       # note: If you use only_check_changed_files, you do not want cancel-in-progress
       cancel-in-progress: true
     steps:
-    - name: check-spelling
-      id: spelling
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        suppress_push_for_open_pull_request: ${{ github.actor != 'dependabot[bot]' && 1 }}
-        checkout: true
-        check_file_names: 1
-        spell_check_this: microsoft/terminal@main
-        post_comment: 0
-        use_magic_file: 1
-        report-timing: 1
-        warnings: bad-regex,binary-file,deprecated-feature,ignored-expect-variant,large-file,limited-references,no-newline-at-eof,noisy-file,non-alpha-in-dictionary,token-is-substring,unexpected-line-ending,whitespace-in-dictionary,minified-file,unsupported-configuration,no-files-to-check
-        experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
-        use_sarif: ${{ (!github.event.pull_request || (github.event.pull_request.head.repo.full_name == github.repository)) && 1 }}
-        extra_dictionary_limit: 20
-        extra_dictionaries:
-          cspell:software-terms/dict/softwareTerms.txt
-          cspell:cpp/src/stdlib-cpp.txt
-          cspell:lorem-ipsum/dictionary.txt
-          cspell:cpp/src/stdlib-c.txt
-          cspell:php/dict/php.txt
-          cspell:filetypes/filetypes.txt
-          cspell:java/src/java.txt
-          cspell:python/src/common/extra.txt
-          cspell:node/dict/node.txt
-          cspell:java/src/java-terms.txt
-          cspell:aws/aws.txt
-          cspell:typescript/dict/typescript.txt
-          cspell:dotnet/dict/dotnet.txt
-          cspell:golang/dict/go.txt
-          cspell:fullstack/dict/fullstack.txt
-          cspell:cpp/src/compiler-msvc.txt
-          cspell:python/src/python/python-lib.txt
-          cspell:mnemonics/src/mnemonics.txt
-          cspell:cpp/src/stdlib-cmath.txt
-          cspell:css/dict/css.txt
-          cspell:cpp/src/lang-keywords.txt
-          cspell:django/dict/django.txt
-          cspell:python/src/python/python.txt
-          cspell:html/dict/html.txt
-          cspell:cpp/src/ecosystem.txt
-          cspell:cpp/src/compiler-clang-attributes.txt
-          cspell:npm/dict/npm.txt
-          cspell:r/src/r.txt
-          cspell:powershell/dict/powershell.txt
-          cspell:csharp/csharp.txt
+      - name: check-spelling
+        id: spelling
+        uses: check-spelling/check-spelling@v0.0.25
+        with:
+          suppress_push_for_open_pull_request: ${{ github.actor != 'dependabot[bot]' && 1 }}
+          checkout: true
+          check_file_names: 1
+          spell_check_this: microsoft/terminal@main
+          post_comment: 0
+          use_magic_file: 1
+          report-timing: 1
+          warnings: bad-regex,binary-file,deprecated-feature,ignored-expect-variant,large-file,limited-references,no-newline-at-eof,noisy-file,non-alpha-in-dictionary,token-is-substring,unexpected-line-ending,whitespace-in-dictionary,minified-file,unsupported-configuration,no-files-to-check,unclosed-block-ignore-begin,unclosed-block-ignore-end
+          experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
+          use_sarif: 1
+          check_extra_dictionaries: ""
+          dictionary_source_prefixes: >
+            {
+            "cspell": "https://raw.githubusercontent.com/check-spelling/cspell-dicts/v20241114/dictionaries/"
+            }
+          extra_dictionaries: |
+            cspell:software-terms/softwareTerms.txt
+            cspell:cpp/stdlib-cpp.txt
+            cspell:cpp/stdlib-c.txt
+            cspell:python/python/python-lib.txt
+            cspell:php/php.txt
+            cspell:node/node.txt
+            cspell:dart/dart.txt
+            cspell:filetypes/filetypes.txt
+            cspell:java/java.txt
+            cspell:css/css.txt
+            cspell:dotnet/dotnet.txt
+            cspell:npm/npm.txt
+            cspell:fullstack/fullstack.txt
+            cspell:java/java-terms.txt
+            cspell:r/r.txt
+            cspell:golang/go.txt
+            cspell:cpp/stdlib-cmath.txt
+            cspell:typescript/typescript.txt
+            cspell:html/html.txt
+            cspell:cpp/compiler-msvc.txt
+            cspell:django/django.txt
+            cspell:aws/aws.txt
+            cspell:python/common/extra.txt
+            cspell:cpp/ecosystem.txt
+            cspell:cpp/lang-keywords.txt
+            cspell:csharp/csharp.txt
+            cspell:cpp/compiler-clang-attributes.txt
+            cspell:python/python/python.txt
+            cspell:mnemonics/mnemonics.txt
+            cspell:powershell/powershell.txt
 
   comment-push:
     name: Report (Push)
@@ -144,15 +148,16 @@ jobs:
     runs-on: ubuntu-latest
     needs: spelling
     permissions:
+      actions: read
       contents: write
     if: (success() || failure()) && needs.spelling.outputs.followup && github.event_name == 'push'
     steps:
-    - name: comment
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        checkout: true
-        spell_check_this: microsoft/terminal@main
-        task: ${{ needs.spelling.outputs.followup }}
+      - name: comment
+        uses: check-spelling/check-spelling@v0.0.25
+        with:
+          checkout: true
+          spell_check_this: microsoft/terminal@main
+          task: ${{ needs.spelling.outputs.followup }}
 
   comment-pr:
     name: Report (PR)
@@ -160,17 +165,18 @@ jobs:
     runs-on: ubuntu-latest
     needs: spelling
     permissions:
+      actions: read
       contents: read
       pull-requests: write
     if: (success() || failure()) && needs.spelling.outputs.followup && contains(github.event_name, 'pull_request')
     steps:
-    - name: comment
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        checkout: true
-        spell_check_this: microsoft/terminal@main
-        task: ${{ needs.spelling.outputs.followup }}
-        experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
+      - name: comment
+        uses: check-spelling/check-spelling@v0.0.25
+        with:
+          checkout: true
+          spell_check_this: microsoft/terminal@main
+          task: ${{ needs.spelling.outputs.followup }}
+          experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
 
   update:
     name: Update PR
@@ -180,18 +186,19 @@ jobs:
       actions: read
     runs-on: ubuntu-latest
     if: ${{
-        github.repository_owner != 'microsoft' &&
-        github.event_name == 'issue_comment' &&
-        github.event.issue.pull_request &&
-        contains(github.event.comment.body, '@check-spelling-bot apply')
+      github.repository_owner != 'microsoft' &&
+      github.event_name == 'issue_comment' &&
+      github.event.issue.pull_request &&
+      contains(github.event.comment.body, '@check-spelling-bot apply') &&
+      contains(github.event.comment.body, 'https://')
       }}
     concurrency:
       group: spelling-update-${{ github.event.issue.number }}
       cancel-in-progress: false
     steps:
-    - name: apply spelling updates
-      uses: check-spelling/check-spelling@v0.0.22
-      with:
-        experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
-        checkout: true
-        ssh_key: "${{ secrets.CHECK_SPELLING }}"
+      - name: apply spelling updates
+        uses: check-spelling/check-spelling@v0.0.25
+        with:
+          experimental_apply_changes_via_bot: ${{ github.repository_owner != 'microsoft' && 1 }}
+          checkout: true
+          ssh_key: "${{ secrets.CHECK_SPELLING }}"

.github/workflows/winget.yml

@@ -1,4 +1,4 @@
-name: Publish to Winget
+name: Publish to WinGet
 
 on:
   release:
@@ -6,6 +6,9 @@ on:
 
 env:
   REGEX: 'Microsoft\.WindowsTerminal(?:Preview)?_([\d.]+)_8wekyb3d8bbwe\.msixbundle$'
+  # winget-create will read the following environment variable to access the GitHub token needed for submitting a PR
+  # See https://aka.ms/winget-create-token
+  WINGET_CREATE_GITHUB_TOKEN: ${{ secrets.WINGET_TOKEN }}
 
 jobs:
   publish:
@@ -21,4 +24,4 @@ jobs:
           $wingetPackage = "Microsoft.WindowsTerminal${{ github.event.release.prerelease && '.Preview' || '' }}"
 
           & curl.exe -JLO https://aka.ms/wingetcreate/latest
-          & .\wingetcreate.exe update $wingetPackage -s -v $version -u $wingetRelevantAsset.browser_download_url -t "${{ secrets.WINGET_TOKEN }}"
+          & .\wingetcreate.exe update $wingetPackage -s -v $version -u $wingetRelevantAsset.browser_download_url

CONTRIBUTING.md

@@ -158,7 +158,7 @@ Once you've discussed your proposed feature/fix/etc. with a team member, and you
 
 ### Testing
 
-Testing is a key component in the development workflow. Both Windows Terminal and Windows Console use TAEF(the Test Authoring and Execution Framework) as the main framework for testing.
+Testing is a key component in the development workflow. Both Windows Terminal and Windows Console use TAEF (the Test Authoring and Execution Framework) as the main framework for testing.
 
 If your changes affect existing test cases, or you're working on brand new features and also the accompanying test cases, see [TAEF](./doc/TAEF.md) for more information about how to validate your work locally.
 

Directory.Build.props

@@ -33,6 +33,17 @@
       A:\;
       E:\;
       $(windir)\**;
+      $(MSBuildBinPath)\**;
+      $(MSBuildToolsPath32)\**;
+    </MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns>
+
+    <!--
+      Unit tests may write to TEMP, but should not be considered outputs. However, $(Temp) is using the DOS path (C:\Users\CLOUDT~1\AppData\Local\Temp), which
+      isn't accounted for in these globs. So we're building up to TEMP using $(LOCALAPPDATA) instead.
+    -->
+    <MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns>
+      $(MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns);
+      $(LOCALAPPDATA)\Temp\**;
     </MSBuildCacheAllowFileAccessAfterProjectFinishFilePatterns>
 
     <!-- 
@@ -46,6 +57,15 @@
     -->
     <MSBuildCacheIdenticalDuplicateOutputPatterns>$(MSBuildCacheIdenticalDuplicateOutputPatterns);obj\*\vcpkg\**</MSBuildCacheIdenticalDuplicateOutputPatterns>
 
+    <!--
+      Ensure the MSBuildCache ignores collecting outputs under vcpkg's build tree, which is a working directory used to build vcpkg packages and not intended to be consumed by anything else in the build.
+      Note: We cannot use $(VcpkgInstalledDir) directly since it differs between projects, so use a pattern which encompasses all possibilities.
+    -->
+    <MSBuildCacheIgnoredOutputPatterns>
+      $(MSBuildCacheIgnoredOutputPatterns);
+      $(SolutionDir)\obj\*\vcpkg*\vcpkg\blds\**;
+    </MSBuildCacheIgnoredOutputPatterns>
+
     <!-- version of MSBuildCache is not part of the cache key -->
     <PackagesConfigFile>$(MSBuildThisFileDirectory)\dep\nuget\packages.config</PackagesConfigFile>
     <MSBuildCacheIgnoredInputPatterns>$(MSBuildCacheIgnoredInputPatterns);$(PackagesConfigFile)</MSBuildCacheIgnoredInputPatterns>

NOTICE.md

@@ -285,6 +285,8 @@ specific language governing permissions and limitations under the License.
 **Source**: [https://github.com/commonmark/cmark](https://github.com/commonmark/cmark)
 
 ### License
+
+```
 Copyright (c) 2014, John MacFarlane
 
 All rights reserved.
@@ -455,6 +457,36 @@ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+```
+
+## fzf
+
+### License
+
+```
+The MIT License (MIT)
+
+Copyright (c) 2013-2024 Junegunn Choi
+Copyright (c) 2021-2025 Simon Hauser
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+```
 
 # Microsoft Open Source
 

OpenConsole.sln

@@ -178,7 +178,6 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Microsoft.Terminal.Control"
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "WindowsTerminal", "src\cascadia\WindowsTerminal\WindowsTerminal.vcxproj", "{CA5CAD1A-1754-4A9D-93D7-857A9D17CB1B}"
 	ProjectSection(ProjectDependencies) = postProject
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE} = {27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}
 		{9CBD7DFA-1754-4A9D-93D7-857A9D17CB1B} = {9CBD7DFA-1754-4A9D-93D7-857A9D17CB1B}
 		{CA5CAD1A-0B5E-45C3-96A8-BB496BFE4E32} = {CA5CAD1A-0B5E-45C3-96A8-BB496BFE4E32}
 		{CA5CAD1A-44BD-4AC7-AC72-F16E576FDD12} = {CA5CAD1A-44BD-4AC7-AC72-F16E576FDD12}
@@ -348,26 +347,6 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "UnitTests_SettingsModel", "
 		{CA5CAD1A-F542-4635-A069-7CAEFB930070} = {CA5CAD1A-F542-4635-A069-7CAEFB930070}
 	EndProjectSection
 EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "MonarchPeasantSample", "src\tools\MonarchPeasantSample\MonarchPeasantSample.vcxproj", "{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}"
-	ProjectSection(ProjectDependencies) = postProject
-		{18D09A24-8240-42D6-8CB6-236EEE820263} = {18D09A24-8240-42D6-8CB6-236EEE820263}
-	EndProjectSection
-EndProject
-Project("{C7167F0D-BC9F-4E6E-AFE1-012C56B48DB5}") = "MonarchPeasantPackage", "src\tools\MonarchPeasantPackage\MonarchPeasantPackage.wapproj", "{F75E29D0-D288-478B-8D83-2C190F321A3F}"
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Microsoft.Terminal.Remoting.Lib", "src\cascadia\Remoting\Microsoft.Terminal.RemotingLib.vcxproj", "{43CE4CE5-0010-4B99-9569-672670D26E26}"
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Microsoft.Terminal.Remoting", "src\cascadia\Remoting\dll\Microsoft.Terminal.Remoting.vcxproj", "{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}"
-	ProjectSection(ProjectDependencies) = postProject
-		{43CE4CE5-0010-4B99-9569-672670D26E26} = {43CE4CE5-0010-4B99-9569-672670D26E26}
-	EndProjectSection
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "UnitTests_Remoting", "src\cascadia\UnitTests_Remoting\Remoting.UnitTests.vcxproj", "{68A10CD3-AA64-465B-AF5F-ED4E9700543C}"
-	ProjectSection(ProjectDependencies) = postProject
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE} = {27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}
-		{43CE4CE5-0010-4B99-9569-672670D26E26} = {43CE4CE5-0010-4B99-9569-672670D26E26}
-	EndProjectSection
-EndProject
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "wpf", "wpf", "{4DAF0299-495E-4CD1-A982-9BAC16A45932}"
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "OpenConsoleProxy", "src\host\proxy\Host.Proxy.vcxproj", "{71CC9D78-BA29-4D93-946F-BEF5D9A3A6EF}"
@@ -1925,135 +1904,6 @@ Global
 		{CA5CAD1A-9B68-456A-B13E-C8218070DC42}.Release|x64.Build.0 = Release|x64
 		{CA5CAD1A-9B68-456A-B13E-C8218070DC42}.Release|x86.ActiveCfg = Release|Win32
 		{CA5CAD1A-9B68-456A-B13E-C8218070DC42}.Release|x86.Build.0 = Release|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.AuditMode|Any CPU.ActiveCfg = Debug|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.AuditMode|ARM64.ActiveCfg = Release|ARM64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.AuditMode|x64.ActiveCfg = Release|x64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.AuditMode|x86.ActiveCfg = Release|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Debug|Any CPU.ActiveCfg = Debug|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Debug|ARM64.Build.0 = Debug|ARM64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Debug|x64.ActiveCfg = Debug|x64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Debug|x64.Build.0 = Debug|x64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Debug|x86.ActiveCfg = Debug|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Debug|x86.Build.0 = Debug|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Release|Any CPU.ActiveCfg = Release|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Release|ARM64.ActiveCfg = Release|ARM64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Release|ARM64.Build.0 = Release|ARM64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Release|x64.ActiveCfg = Release|x64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Release|x64.Build.0 = Release|x64
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Release|x86.ActiveCfg = Release|Win32
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D}.Release|x86.Build.0 = Release|Win32
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|Any CPU.ActiveCfg = Release|Any CPU
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|ARM64.ActiveCfg = Debug|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|ARM64.Build.0 = Debug|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|ARM64.Deploy.0 = Debug|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|x64.ActiveCfg = Debug|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|x64.Build.0 = Debug|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|x64.Deploy.0 = Debug|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|x86.ActiveCfg = Debug|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|x86.Build.0 = Debug|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.AuditMode|x86.Deploy.0 = Debug|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|ARM64.Build.0 = Debug|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|ARM64.Deploy.0 = Debug|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|x64.ActiveCfg = Debug|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|x64.Build.0 = Debug|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|x64.Deploy.0 = Debug|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|x86.ActiveCfg = Debug|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|x86.Build.0 = Debug|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Debug|x86.Deploy.0 = Debug|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Fuzzing|Any CPU.ActiveCfg = Release|Any CPU
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Fuzzing|x64.ActiveCfg = Release|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Fuzzing|x86.ActiveCfg = Release|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|Any CPU.ActiveCfg = Release|Any CPU
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|ARM64.ActiveCfg = Release|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|ARM64.Build.0 = Release|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|ARM64.Deploy.0 = Release|ARM64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|x64.ActiveCfg = Release|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|x64.Build.0 = Release|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|x64.Deploy.0 = Release|x64
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|x86.ActiveCfg = Release|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|x86.Build.0 = Release|x86
-		{F75E29D0-D288-478B-8D83-2C190F321A3F}.Release|x86.Deploy.0 = Release|x86
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.AuditMode|x64.ActiveCfg = Release|x64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.AuditMode|x64.Build.0 = Release|x64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Debug|Any CPU.ActiveCfg = Debug|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Debug|ARM64.Build.0 = Debug|ARM64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Debug|x64.ActiveCfg = Debug|x64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Debug|x64.Build.0 = Debug|x64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Debug|x86.ActiveCfg = Debug|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Debug|x86.Build.0 = Debug|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Release|Any CPU.ActiveCfg = Release|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Release|ARM64.ActiveCfg = Release|ARM64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Release|ARM64.Build.0 = Release|ARM64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Release|x64.ActiveCfg = Release|x64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Release|x64.Build.0 = Release|x64
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Release|x86.ActiveCfg = Release|Win32
-		{43CE4CE5-0010-4B99-9569-672670D26E26}.Release|x86.Build.0 = Release|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.AuditMode|x64.ActiveCfg = Release|x64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Debug|Any CPU.ActiveCfg = Debug|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Debug|ARM64.Build.0 = Debug|ARM64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Debug|x64.ActiveCfg = Debug|x64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Debug|x64.Build.0 = Debug|x64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Debug|x86.ActiveCfg = Debug|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Debug|x86.Build.0 = Debug|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Release|Any CPU.ActiveCfg = Release|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Release|ARM64.ActiveCfg = Release|ARM64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Release|ARM64.Build.0 = Release|ARM64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Release|x64.ActiveCfg = Release|x64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Release|x64.Build.0 = Release|x64
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Release|x86.ActiveCfg = Release|Win32
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE}.Release|x86.Build.0 = Release|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Debug|Any CPU.ActiveCfg = Debug|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Debug|ARM64.Build.0 = Debug|ARM64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Debug|x64.ActiveCfg = Debug|x64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Debug|x64.Build.0 = Debug|x64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Debug|x86.ActiveCfg = Debug|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Debug|x86.Build.0 = Debug|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Release|Any CPU.ActiveCfg = Release|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Release|ARM64.ActiveCfg = Release|ARM64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Release|ARM64.Build.0 = Release|ARM64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Release|x64.ActiveCfg = Release|x64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Release|x64.Build.0 = Release|x64
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Release|x86.ActiveCfg = Release|Win32
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C}.Release|x86.Build.0 = Release|Win32
 		{71CC9D78-BA29-4D93-946F-BEF5D9A3A6EF}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
 		{71CC9D78-BA29-4D93-946F-BEF5D9A3A6EF}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
 		{71CC9D78-BA29-4D93-946F-BEF5D9A3A6EF}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
@@ -2304,10 +2154,14 @@ Global
 		{6515F03F-E56D-4DB4-B23D-AC4FB80DB36F}.Release|x64.Build.0 = Release|x64
 		{6515F03F-E56D-4DB4-B23D-AC4FB80DB36F}.Release|x86.ActiveCfg = Release|Win32
 		{6515F03F-E56D-4DB4-B23D-AC4FB80DB36F}.Release|x86.Build.0 = Release|Win32
-        {7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|Any CPU.ActiveCfg = Debug|Win32
-        {7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|ARM64.ActiveCfg = Release|ARM64
-        {7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|x64.ActiveCfg = Release|x64
-        {7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|x86.ActiveCfg = Release|Win32
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|Any CPU.ActiveCfg = AuditMode|x64
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|Any CPU.Build.0 = AuditMode|x64
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|ARM64.Build.0 = AuditMode|ARM64
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|x64.ActiveCfg = AuditMode|x64
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|x64.Build.0 = AuditMode|x64
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|x86.ActiveCfg = AuditMode|Win32
+		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.AuditMode|x86.Build.0 = AuditMode|Win32
 		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.Debug|Any CPU.ActiveCfg = Debug|x64
 		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.Debug|ARM64.ActiveCfg = Debug|ARM64
 		{7615F03F-E56D-4DB4-B23D-BD4FB80DB36F}.Debug|ARM64.Build.0 = Debug|ARM64
@@ -2457,11 +2311,6 @@ Global
 		{CA5CAD1A-D7EC-4107-B7C6-79CB77AE2907} = {77875138-BB08-49F9-8BB1-409C2150E0E1}
 		{CA5CAD1A-082C-4476-9F33-94B339494076} = {77875138-BB08-49F9-8BB1-409C2150E0E1}
 		{CA5CAD1A-9B68-456A-B13E-C8218070DC42} = {BDB237B6-1D1D-400F-84CC-40A58FA59C8E}
-		{21B7EA5E-1EF8-49B6-AC07-11714AF0E37D} = {A10C4720-DCA4-4640-9749-67F4314F527C}
-		{F75E29D0-D288-478B-8D83-2C190F321A3F} = {A10C4720-DCA4-4640-9749-67F4314F527C}
-		{43CE4CE5-0010-4B99-9569-672670D26E26} = {2D17E75D-2DDC-42C4-AD70-704D95A937AE}
-		{27B5AAEB-A548-44CF-9777-F8BAA32AF7AE} = {2D17E75D-2DDC-42C4-AD70-704D95A937AE}
-		{68A10CD3-AA64-465B-AF5F-ED4E9700543C} = {BDB237B6-1D1D-400F-84CC-40A58FA59C8E}
 		{4DAF0299-495E-4CD1-A982-9BAC16A45932} = {59840756-302F-44DF-AA47-441A9D673202}
 		{71CC9D78-BA29-4D93-946F-BEF5D9A3A6EF} = {E8F24881-5E37-4362-B191-A3BA0ED7F4EB}
 		{2D17E75D-2DDC-42C4-AD70-704D95A937AE} = {59840756-302F-44DF-AA47-441A9D673202}

README.md

@@ -4,6 +4,42 @@
 
 # Welcome to the Windows Terminal, Console and Command-Line repo
 
+<details>
+  <summary><strong>Table of Contents</strong></summary>
+
+- [Installing and running Windows Terminal](#installing-and-running-windows-terminal)
+  - [Microsoft Store \[Recommended\]](#microsoft-store-recommended)
+  - [Other install methods](#other-install-methods)
+    - [Via GitHub](#via-github)
+    - [Via Windows Package Manager CLI (aka winget)](#via-windows-package-manager-cli-aka-winget)
+    - [Via Chocolatey (unofficial)](#via-chocolatey-unofficial)
+    - [Via Scoop (unofficial)](#via-scoop-unofficial)
+- [Installing Windows Terminal Canary](#installing-windows-terminal-canary)
+- [Windows Terminal Roadmap](#windows-terminal-roadmap)
+- [Terminal \& Console Overview](#terminal--console-overview)
+  - [Windows Terminal](#windows-terminal)
+  - [The Windows Console Host](#the-windows-console-host)
+  - [Shared Components](#shared-components)
+  - [Creating the new Windows Terminal](#creating-the-new-windows-terminal)
+- [Resources](#resources)
+- [FAQ](#faq)
+  - [I built and ran the new Terminal, but it looks just like the old console](#i-built-and-ran-the-new-terminal-but-it-looks-just-like-the-old-console)
+- [Documentation](#documentation)
+- [Contributing](#contributing)
+- [Communicating with the Team](#communicating-with-the-team)
+- [Developer Guidance](#developer-guidance)
+- [Prerequisites](#prerequisites)
+- [Building the Code](#building-the-code)
+  - [Building in PowerShell](#building-in-powershell)
+  - [Building in Cmd](#building-in-cmd)
+- [Running \& Debugging](#running--debugging)
+  - [Coding Guidance](#coding-guidance)
+- [Code of Conduct](#code-of-conduct)
+
+</details>
+
+<br />
+
 This repository contains the source code for:
 
 * [Windows Terminal](https://aka.ms/terminal)
@@ -304,6 +340,19 @@ If you would like to ask a question that you feel doesn't warrant an issue
 
 ## Prerequisites
 
+You can configure your environment to build Terminal in one of two ways:
+
+### Using WinGet configuration file
+
+After cloning the repository, you can use a [WinGet configuration file](https://learn.microsoft.com/en-us/windows/package-manager/configuration/#use-a-winget-configuration-file-to-configure-your-machine)
+to set up your environment. The [default configuration file](.config/configuration.winget) installs Visual Studio 2022 Community & rest of the required tools. There are two other variants of the configuration file available in the [.config](.config) directory for Enterprise & Professional editions of Visual Studio 2022. To run the default configuration file, you can either double-click the file from explorer or run the following command:
+
+```powershell
+winget configure .config\configuration.winget
+```
+
+### Manual configuration
+
 * You must be running Windows 10 2004 (build >= 10.0.19041.0) or later to run
   Windows Terminal
 * You must [enable Developer Mode in the Windows Settings
@@ -326,15 +375,6 @@ If you would like to ask a question that you feel doesn't warrant an issue
 
 ## Building the Code
 
-This repository uses [git
-submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its
-dependencies. To make sure submodules are restored or updated, be sure to run
-the following prior to building:
-
-```shell
-git submodule update --init --recursive
-```
-
 OpenConsole.sln may be built from within Visual Studio or from the command-line
 using a set of convenience scripts & tools in the **/tools** directory:
 

build/Helix/HelixTestHelpers.cs

@@ -28,7 +28,7 @@ namespace HelixTestHelpers
         public List<string> Screenshots { get; private set; }
         public List<TestResult> RerunResults { get; private set; }
     }
-    
+
     //
     // Azure DevOps doesn't currently provide a way to directly report sub-results for tests that failed at least once
     // that were run multiple times.  To get around that limitation, we'll mark the test as "Skip" since
@@ -49,46 +49,46 @@ namespace HelixTestHelpers
     // TODO (https://github.com/dotnet/arcade/issues/2773): Once we're able to directly report things in a
     // more granular fashion than just a binary pass/fail result, we should do that.
     //
-    [DataContract]  
+    [DataContract]
     internal class JsonSerializableTestResults
-    {  
+    {
         [DataMember]
         internal string blobPrefix;
-        
+
         [DataMember]
         internal string blobSuffix;
-        
+
         [DataMember]
         internal string[] errors;
-        
+
         [DataMember]
         internal JsonSerializableTestResult[] results;
     }
-    
-    [DataContract]  
-    internal class JsonSerializableTestResult  
+
+    [DataContract]
+    internal class JsonSerializableTestResult
     {
         [DataMember]
         internal string outcome;
 
         [DataMember]
         internal int duration;
-        
+
         [DataMember(EmitDefaultValue = false)]
         internal string log;
-        
+
         [DataMember(EmitDefaultValue = false)]
         internal string[] screenshots;
-        
+
         [DataMember(EmitDefaultValue = false)]
         internal int errorIndex;
     }
-    
+
     public class TestPass
     {
         public TimeSpan TestPassExecutionTime { get; set; }
         public List<TestResult> TestResults { get; set; }
-        
+
         public static TestPass ParseTestWttFile(string fileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
         {
             using (var stream = File.OpenRead(fileName))
@@ -174,7 +174,7 @@ namespace HelixTestHelpers
                         if (testsExecuting == 1)
                         {
                             string testName = element.Attribute("Title").Value;
-                            
+
                             if (truncateTestNames)
                             {
                                 const string xamlNativePrefix = "Windows::UI::Xaml::Tests::";
@@ -243,7 +243,7 @@ namespace HelixTestHelpers
 
 
                         // The test cleanup errors will often come after the test claimed to have
-                        // 'passed'. We treat them as errors as well. 
+                        // 'passed'. We treat them as errors as well.
                         if (inTestCleanup)
                         {
                             currentResult.CleanupPassed = false;
@@ -292,7 +292,7 @@ namespace HelixTestHelpers
                                 foreach(var screenshot in screenshots)
                                 {
                                     string fileNameSuffix = string.Empty;
-                                    
+
                                     if (fileName.Contains("_rerun_multiple"))
                                     {
                                         fileNameSuffix = "_rerun_multiple";
@@ -301,7 +301,7 @@ namespace HelixTestHelpers
                                     {
                                         fileNameSuffix = "_rerun";
                                     }
-                                    
+
                                     currentResult.Screenshots.Add(screenshot.Replace(".jpg", fileNameSuffix + ".jpg"));
                                 }
                             }
@@ -313,7 +313,7 @@ namespace HelixTestHelpers
                 testPassStopTime = Int64.Parse(doc.Root.Descendants("WexTraceInfo").Last().Attribute("TimeStamp").Value);
 
                 var testPassTime = TimeSpan.FromSeconds((double)(testPassStopTime - testPassStartTime) / frequency);
-                
+
                 foreach (TestResult testResult in testResults)
                 {
                     if (testResult.Details != null)
@@ -331,13 +331,13 @@ namespace HelixTestHelpers
                 return testpass;
             }
         }
-        
+
         public static TestPass ParseTestWttFileWithReruns(string fileName, string singleRerunFileName, string multipleRerunFileName, bool cleanupFailuresAreRegressions, bool truncateTestNames)
         {
             TestPass testPass = ParseTestWttFile(fileName, cleanupFailuresAreRegressions, truncateTestNames);
             TestPass singleRerunTestPass = File.Exists(singleRerunFileName) ? ParseTestWttFile(singleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
             TestPass multipleRerunTestPass = File.Exists(multipleRerunFileName) ? ParseTestWttFile(multipleRerunFileName, cleanupFailuresAreRegressions, truncateTestNames) : null;
-            
+
             List<TestResult> rerunTestResults = new List<TestResult>();
 
             if (singleRerunTestPass != null)
@@ -377,9 +377,9 @@ namespace HelixTestHelpers
         public static void OutputFailedTestQuery(string wttInputPath)
         {
             var testPass = TestPass.ParseTestWttFile(wttInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            
+
             List<string> failedTestNames = new List<string>();
-            
+
             foreach (var result in testPass.TestResults)
             {
                 if (!result.Passed)
@@ -387,23 +387,23 @@ namespace HelixTestHelpers
                     failedTestNames.Add(result.Name);
                 }
             }
-            
+
             if (failedTestNames.Count > 0)
             {
                 string failedTestSelectQuery = "(@Name='";
-                
+
                 for (int i = 0; i < failedTestNames.Count; i++)
                 {
                     failedTestSelectQuery += failedTestNames[i];
-                    
+
                     if (i < failedTestNames.Count - 1)
                     {
                         failedTestSelectQuery += "' or @Name='";
                     }
                 }
-                
+
                 failedTestSelectQuery += "')";
-            
+
                 Console.WriteLine(failedTestSelectQuery);
             }
             else
@@ -418,7 +418,7 @@ namespace HelixTestHelpers
         private string testNamePrefix;
         private string helixResultsContainerUri;
         private string helixResultsContainerRsas;
-    
+
         public TestResultParser(string testNamePrefix, string helixResultsContainerUri, string helixResultsContainerRsas)
         {
             this.testNamePrefix = testNamePrefix;
@@ -430,7 +430,7 @@ namespace HelixTestHelpers
         {
             Dictionary<string, string> subResultsJsonByMethod = new Dictionary<string, string>();
             TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
-            
+
             foreach (var result in testPass.TestResults)
             {
                 var methodName = result.Name.Substring(result.Name.LastIndexOf('.') + 1);
@@ -488,7 +488,7 @@ namespace HelixTestHelpers
 
             int resultCount = results.Count;
             int passedCount = results.Where(r => r.Passed).Count();
-            
+
             // Since we re-run tests on failure, we'll mark every test that failed at least once as "skipped" rather than "failed".
             // If the test failed sufficiently often enough for it to count as a failed test (determined by a property on the
             // Azure DevOps job), we'll later mark it as failed during test results processing.
@@ -504,15 +504,15 @@ namespace HelixTestHelpers
             assembly.SetAttributeValue("run-date", DateTime.Now.ToString("yyyy-MM-dd"));
 
             // This doesn't need to be completely accurate since it's not exposed anywhere.
-            // If we need accurate an start time we can probably calculate it from the te.wtl file, but for
+            // If we need an accurate start time we can probably calculate it from the te.wtl file, but for
             // now this is fine.
             assembly.SetAttributeValue("run-time", (DateTime.Now - testPass.TestPassExecutionTime).ToString("hh:mm:ss"));
-            
+
             assembly.SetAttributeValue("total", resultCount);
             assembly.SetAttributeValue("passed", passedCount);
             assembly.SetAttributeValue("failed", failedCount);
             assembly.SetAttributeValue("skipped", skippedCount);
-            
+
             assembly.SetAttributeValue("time", (int)testPass.TestPassExecutionTime.TotalSeconds);
             assembly.SetAttributeValue("errors", 0);
             root.Add(assembly);
@@ -537,9 +537,9 @@ namespace HelixTestHelpers
                 test.SetAttributeValue("method", methodName);
 
                 test.SetAttributeValue("time", result.ExecutionTime.TotalSeconds);
-                
+
                 string resultString = string.Empty;
-                
+
                 if (result.Passed && !result.Skipped)
                 {
                     resultString = "Pass";
@@ -554,7 +554,7 @@ namespace HelixTestHelpers
                     resultString = "Fail";
                 }
 
-                
+
                 if (!result.Passed)
                 {
                     if (result.Skipped)
@@ -579,36 +579,36 @@ namespace HelixTestHelpers
 
             File.WriteAllText(xunitOutputPath, root.ToString());
         }
-        
+
         private JsonSerializableTestResult ConvertToSerializableResult(TestResult rerunResult, string[] uniqueErrors)
         {
             var serializableResult = new JsonSerializableTestResult();
-            
+
             serializableResult.outcome = rerunResult.Passed ? "Passed" : "Failed";
             serializableResult.duration = (int)Math.Round(rerunResult.ExecutionTime.TotalMilliseconds);
-            
+
             if (!rerunResult.Passed)
             {
                 serializableResult.log = Path.GetFileName(rerunResult.SourceWttFile);
-                
+
                 if (rerunResult.Screenshots.Any())
                 {
                     List<string> screenshots = new List<string>();
-                    
+
                     foreach (var screenshot in rerunResult.Screenshots)
                     {
                         screenshots.Add(Path.GetFileName(screenshot));
                     }
-                    
+
                     serializableResult.screenshots = screenshots.ToArray();
                 }
-                
+
                 // To conserve space, we'll log the index of the error to index in a list of unique errors rather than
                 // jotting down every single error in its entirety. We'll add one to the result so we can avoid
                 // serializing this property when it has the default value of 0.
                 serializableResult.errorIndex = Array.IndexOf(uniqueErrors, rerunResult.Details) + 1;
             }
-            
+
             return serializableResult;
         }
 
@@ -617,7 +617,7 @@ namespace HelixTestHelpers
             var filename = Path.GetFileName(filePath);
             return string.Format("{0}/{1}{2}", helixResultsContainerUri, filename, helixResultsContainerRsas);
         }
-		
+
 		private string GetTestNameSeparator(string testname)
         {
             var separatorString = ".";

build/StoreSubmission/Preview/PDPs/de-DE/PDP.xml

@@ -56,15 +56,11 @@ Dies ist ein Open Source-Projekt, und wir freuen uns über die Teilnahme der Com
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-– Wir haben umgeschrieben, wie Konsolenanwendungen im Terminal gehostet werden! Melden Sie alle auftretenden Fehler.
-- Terminal unterstützt jetzt Sixels!
-- Sie können jetzt ein angedocktes Fenster öffnen, das Ausschnitte von Befehlen enthält, die Sie gespeichert haben, um sie später zu verwenden.
-- Für Benutzer der Eingabeaufforderung der neuesten Version von Windows 11 wird möglicherweise ein „Kurzer Tipp“-Symbol angezeigt, das installierbare Software von WinGet
- vorschlägt
-- Ausgewählter Text wird jetzt viel sichtbarer (und anpassbarer!)
-- Eine Reihe von Zuverlässigkeitsfehlern, Komfortproblemen und Ärgernissen wurden behoben.
+- Wir haben der Benutzeroberfläche durchschnittliche Einstellungen hinzugefügt, die nur einmal in der JSON-Datei vorhanden waren, einschließlich einer neuen Seite zum Anpassen des Layouts Ihres Menüs "Neue Registerkarte"!
+- Wir haben die Fensterverwaltung zurückgesetzt, um die Zuverlässigkeit zu verbessern; Melden Sie alle Fehler, die mit dem alias "wt.exe" auftreten.
+- Profile zeigen jetzt ein Symbol an, wenn sie ausgeblendet wurden oder auf programme verweisen, die deinstalliert wurden.
 
-Weitere Informationen finden Sie auf unserer GitHub-Releaseseite.
+Weitere Details finden Sie auf unserer GitHub-Releasesseite.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/en-US/PDP.xml

@@ -54,14 +54,11 @@ This is an open source project and we welcome community participation. To partic
     <!-- _locComment_text="{MaxLength=255} App DevStudio" -->
   </DevStudio>
   <ReleaseNotes _locID="App_ReleaseNotes">
-    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__} App Release Note" -->Version __VERSION_NUMBER__
+    <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__}{Locked=wt.exe} App Release Note" -->Version __VERSION_NUMBER__
 
-- We've rewritten how console applications are hosted inside Terminal! Please report any bugs you encounter.
-- Terminal now supports Sixels!
-- You can now open a docked panel containing snippets of commands you have saved to use later
-- Command Prompt users on the latest Windows 11 release may see a "quick tip" icon that suggests installable software from WinGet
-- Selected text will now be much more visible (and customizable!)
-- A number of reliabilty bugs, convenience issues and annoyances have been fixed.
+- We've added dozens of settings to the UI that once only existed in the JSON file, including a new page for customizing the layout of your New Tab menu!
+- We have rearchitected window management to improve reliability; please file any bugs you encounter with the wt.exe alias
+- Profiles now show an icon if they've been hidden or refer to programs which were uninstalled.
 
 Please see our GitHub releases page for additional details.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/es-ES/PDP.xml

@@ -56,14 +56,11 @@ Este es un proyecto de fuente abierta y animamos a la comunidad a participar. Pa
   <ReleaseNotes>
     Versión __VERSION_NUMBER__
 
-- Hemos reescrito cómo se hospedan las aplicaciones de consola en Terminal. Informe de los errores que encuentre.
-- Terminal ahora admite sixeles.
-- Ahora puede abrir un panel acoplado que contenga fragmentos de comandos que haya guardado para usarlos más adelante
-- Los usuarios del símbolo del sistema de la versión más reciente de Windows 11 pueden ver un icono de "sugerencia rápida" que sugiere software instalable de WinGet
-- El texto seleccionado ahora será mucho más visible (y personalizable)
-- Se han corregido varios errores de fiabilidad, problemas de comodidad y molestias.
+- Hemos agregado decenas de configuraciones a la interfaz de usuario que solo existían una vez en el archivo JSON, incluida una página nueva para personalizar el diseño del menú Nueva pestaña.
+- Tenemos administración de ventanas rearchitecdas para mejorar la confiabilidad; envíe los errores que encuentre con el alias de wt.exe.
+- Ahora, los perfiles muestran un icono si se han ocultado o hacen referencia a programas que se han desinstalado.
 
-Consulte la página de versiones de GitHub para más información.
+Consulte nuestra página de versiones de GitHub para obtener más detalles.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/fr-FR/PDP.xml

@@ -54,16 +54,13 @@ Il s’agit d’un projet open source et nous vous invitons à participer dans l
     
   </DevStudio>
   <ReleaseNotes>
-    Version __VERSION_NUMBER__
+    __VERSION_NUMBER__ de version
 
-- Nous avons réécrit la manière dont les applications de console sont hébergées dans Terminal ! Veuillez signaler tout bug que vous rencontrez.
-- Le terminal prend désormais en charge Sixels !
-- Vous pouvez désormais ouvrir un panneau ancré contenant des extraits de commandes que vous avez enregistrées pour les utiliser ultérieurement
-- Les utilisateurs de l'invite de commande sur la dernière version de Windows 11 peuvent voir une icône « astuce rapide » qui suggère un logiciel installable à partir de WinGet
-- Le texte sélectionné sera désormais beaucoup plus visible (et personnalisable !)
-- Un certain nombre de bugs de fiabilité, de problèmes de commodité et de désagréments ont été corrigés.
+- Nous avons ajouté des milliers de paramètres à l’interface utilisateur qui n’existaient auparavant que dans le fichier JSON, y compris une nouvelle page pour personnaliser la disposition de votre menu Nouvel onglet !
+- Nous avons réarchitialiser la gestion des fenêtres pour améliorer la fiabilité ; entrez les bogues rencontrés avec l’alias wt.exe
+- Les profils affichent désormais une icône s’ils ont été masqués ou s’ils font référence à des programmes qui ont été désinstallés.
 
-Veuillez consulter notre page de versions GitHub pour plus de détails.
+Pour plus d’informations, consultez notre page des mises en production GitHub.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/it-IT/PDP.xml

@@ -54,16 +54,13 @@ Si tratta di un progetto open source e la partecipazione della community è molt
     
   </DevStudio>
   <ReleaseNotes>
-    Versione __VERSION_NUMBER__ 
+    Versione __VERSION_NUMBER__
 
-- È stato riscritto il modo in cui le applicazioni della console vengono ospitate all'interno di Terminale. Segnala eventuali bug riscontrati.
-- Terminal supporta ora Sixel.
-- È ora possibile aprire un pannello ancorato contenente frammenti di comandi salvati per usarli in seguito
-- Gli utenti del prompt dei comandi nella versione più recente di Windows 11 potrebbero visualizzare un'icona di "suggerimento rapido" che consiglia il software installabile da WinGet
-- Il testo selezionato sarà ora molto più visibile, oltre che personalizzabile.
-- Sono stati risolti diversi bug di affidabilità, problemi di praticità e fastidi.
+- Sono state aggiunte decine di impostazioni all'interfaccia utente che una volta esisteva solo nel file JSON, inclusa una nuova pagina per personalizzare il layout del menu Nuova scheda.
+- È stata riattivata la gestione delle finestre per migliorare l'affidabilità; inserire eventuali bug riscontrati con l'alias wt.exe
+- I profili ora mostrano un'icona se sono stati nascosti o fanno riferimento ai programmi che sono stati disinstallati.
 
-Per altri dettagli, vedi la pagina delle versioni di GitHub.
+Per altri dettagli, vedere la pagina delle versioni di GitHub.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ja-JP/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     バージョン __VERSION_NUMBER__
 
-- ターミナル内でのコンソール アプリケーションのホスト方法を書き換えました。発生したバグを報告してください。
-- ターミナルで Sixels がサポートされるようになりました。
-- 後で使用するために保存したコマンドのスニペットを含むドッキング パネルを開けるようになりました
-- 最新の Windows 11 リリースのコマンド プロンプト ユーザーには、WinGet からインストール可能なソフトウェアを提案する "クイック ヒント" アイコンが表示される場合があります
-- 選択したテキストが大幅に見やすくなりました (カスタマイズも可能です)
-- 信頼性に関するバグ、利便性の問題、不快な問題の多くが修正されました。
+- [新しいタブ] メニューのレイアウトをカスタマイズするための新しいページを含む、一度だけ JSON ファイルに存在した UI に多数の設定を追加しました。
+- 信頼性を向上させるためにウィンドウ管理を再選択しました。wt.exe エイリアスで発生したバグを報告してください
+- プロファイルが非表示になっているか、アンインストールされたプログラムを参照している場合にアイコンが表示されるようになりました。
 
-詳細については、GitHub リリース ページをご覧ください。
+詳細については、GitHub リリース ページを参照してください。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ko-KR/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     버전 __VERSION_NUMBER__
 
-- 콘솔 애플리케이션이 터미널 내에서 호스팅되는 방법을 다시 작성했습니다! 발생한 버그를 보고하세요.
-- 터미널에서 이제 Sixels를 지원합니다!
-- 이제 나중에 사용하기 위해 저장한 명령 조각이 포함된 도킹된 패널을 열 수 있습니다.
-- 최신 Windows 11 릴리스의 명령 프롬프트 사용자는 WinGet에서 설치 가능한 소프트웨어를 제안하는 "빠른 팁" 아이콘을 볼 수 있습니다.
-- 이제 선택한 텍스트가 훨씬 더 잘 표시됩니다(사용자 지정도 가능!).
-- 여러 신뢰성 버그, 편의 문제 및 성가신 사항이 수정되었습니다.
+- 새 탭 메뉴의 레이아웃을 사용자 지정하기 위한 새 페이지를 포함하여 JSON 파일에 한 번만 존재했던 UI에 수천 개의 설정을 추가했습니다.
+- 안정성을 개선하기 위해 창 관리를 다시 보관했습니다. wt.exe 별칭에 발생한 버그를 제출하세요.
+- 프로필이 숨겨졌거나 제거된 프로그램을 참조하는 경우 이제 프로필에 아이콘이 표시됩니다.
 
 자세한 내용은 GitHub 릴리스 페이지를 참조하세요.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/pt-BR/PDP.xml

@@ -56,14 +56,11 @@ Este é um projeto de código aberto e a participação da comunidade é bem-vin
   <ReleaseNotes>
     Versão __VERSION_NUMBER__
 
-- Reescrevemos a forma como os aplicativos de console são hospedados no Terminal! Certifique-se de reportar os bugs que você encontrar.
-- O terminal agora é compatível com o Sixels!
-- Agora você pode abrir um painel acoplado contendo snippets de comandos que você salvou para usar mais tarde
-- Os usuários do Prompt de Comando na versão mais recente do Windows 11 podem ver um ícone de "dica rápida", que sugere softwares instaláveis a partir do WinGet
-- O texto selecionado agora ficará muito mais visível (e personalizável!)
-- Vários bugs de confiabilidade, problemas de conveniência e incômodos foram resolvidos.
+- Adicionamos várias configurações à interface do usuário que só existiam no arquivo JSON, incluindo uma nova página para personalizar o layout do menu Nova Guia!
+- Temos o gerenciamento de janelas rearmado para melhorar a confiabilidade; registre todos os bugs encontrados com o wt.exe alias
+- Os perfis agora mostram um ícone se eles foram ocultos ou se referem a programas que foram desinstalados.
 
-Confira nossa página de lançamentos no GitHub para obter mais detalhes.
+Consulte nossa página de versões do GitHub para obter detalhes adicionais.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-ploc/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-ploca/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/qps-plocm/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
-- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
-- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
-- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
-- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё àðđέď đöžзńş öƒ śėŧťїńģš тб тнè ÛĮ ťħąт ŏņ¢з όⁿℓγ έжіѕŧéð іή тђε ЈŠΩŃ ƒїℓė, ĭňĉŀџđіņģ å ňэẅ φâģé ƒøя ςŭśŧŏmïżϊñģ тħέ ĺαŷöυτ öƒ убµř Йέẁ Ţàъ мęήµ! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ẁè ĥаνė řэąřčħΐŧέсτέð щįлďοш мǻňαĝēмêиť ťô ϊmрябνé ŗĕŀĩāвîĺïтγ; ρŀěăѕе ƒíŀё αⁿу вûġš ÿøú εʼnćōùлťēѓ ẃïτħ ŧћё wt.exe ǻļĭâś !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Рґøƒíŀêŝ ňöẁ šћθẁ ãй ĭčöñ ίƒ ŧħэŷ'νę ъеєл ђіðδэñ őř řєƒěґ ŧσ φяοġгаmŝ ẅђíçĥ ẁ℮гέ џňϊйşťàľĺèð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !
 
-Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
+Рļèāŝє ŝèĕ θџŗ ĢίťĤцъ řέĺэªşэš ρąĝę ƒόř áďđїτϊōπαľ đэŧдįļŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/ru-RU/PDP.xml

@@ -56,12 +56,9 @@
   <ReleaseNotes>
     Версия __VERSION_NUMBER__
 
-– Мы переписали, как консольные приложения размещаются внутри Терминала! Сообщайте о любых ошибках, с которыми вы столкнулись.
-– Терминал теперь поддерживает форматы Sixel!
-– Теперь вы можете открыть закрепленную панель, содержащую фрагменты команд, которые вы сохранили для использования в дальнейшем
-– Пользователи командной строки в новейшем выпуске Windows 11 могут увидеть значок "краткой подсказки", который предлагает устанавливаемые программы из WinGet
-– Выделенный текст теперь станет более видимым (и настраиваемым!)
-– Исправлено несколько ошибок надежности, проблем с удобством, а также устранены раздражающие моменты.
+- Мы добавили в пользовательский интерфейс десятки параметров, которые существовали только в JSON-файле, включая новую страницу для настройки макета меню "Новая вкладка".
+- Для повышения надежности мы переупоряхлили управление окнами; создайте все ошибки, обнаруженные с wt.exe псевдонимом
+- Профили теперь показывают значок, если они скрыты или ссылаются на программы, которые были удалены.
 
 Дополнительные сведения см. на странице выпусков GitHub.
   </ReleaseNotes>

build/StoreSubmission/Preview/PDPs/zh-CN/PDP.xml

@@ -54,16 +54,13 @@
     
   </DevStudio>
   <ReleaseNotes>
-    Version __VERSION_NUMBER__
+    版本 __VERSION_NUMBER__
 
-- 我们已改变主机应用程序在终端内的托管方式!请报告遇到的任何 bug。
-- 终端现在支持 Sixels!
-- 现在可以打开一个停靠面板，其中包含已保存供以后使用的命令片段
-- 最新 Windows 11 版本上的命令提示用户可能会看到“快速提示”图标，该图标建议从 WinGet 安装软件
-- 所选文本现在将具有更高的可见性(和可自定义性!)
-- 修复了许多可靠性 bug、便利性问题和令人烦恼的问题。
+- 我们向用户界面添加了许多设置，这些设置仅存在于 JSON 文件中，包括用于自定义“新建标签页”菜单布局的新页面！
+- 我们已重新检测窗口管理以提高可靠性;请将遇到的任何 bug 归档为 wt.exe 别名
+- 如果配置文件已隐藏或引用已卸载的程序，则它们现在将显示一个图标。
 
-有关其他详细信息，请参阅我们的 GitHub 发布页面。
+有关其他详细信息，请参阅 GitHub 发布页面。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Preview/PDPs/zh-TW/PDP.xml

@@ -56,14 +56,11 @@
   <ReleaseNotes>
     版本 __VERSION_NUMBER__
 
-- 我們已重寫主機應用程式在終端機內託管的方式!請報告您遇到的錯誤。
-- 終端機現在支援 Sixels!
-- 現在，您可以開啟包含已儲存命令程式碼片段的固定面板，以供稍後使用
-- 最新 Windows 11 版本中的 [命令提示] 使用者可能會看到「快速提示」圖示，建議可自 WinGet 安裝的軟體
-- 選取的文字現在會更明顯 (且可自訂!)
-- 已修正一些可靠性錯誤、便利性問題和令人困擾的問題。
+- 我們已新增數十個只存在於 JSON 檔案中的設定到 UI，包括自定義 [新索引標籤] 功能表版面配置的新頁面！
+- 我們已重新設定視窗管理，以改善可靠性;請提出您在 wt.exe 別名遇到的任何錯誤
+- 設定文件現在會在隱藏或參照已卸載的程式時顯示圖示。
 
-如需更多詳細資訊，請參閱我們的 GitHub 發行頁面。
+如需詳細數據，請參閱我們的 GitHub 版本頁面。
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/de-DE/PDP.xml

@@ -56,12 +56,12 @@ Dies ist ein Open Source-Projekt, und wir freuen uns über die Teilnahme an der
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-– Terminal speichert jetzt den Inhalt des Fensters, wenn Sie die Sitzungswiederherstellung verwenden.
-– Sie können jetzt mehrere Schriftarten gleichzeitig verwenden.
-– Kästchenzeichnende Zeichen werden jetzt pixelgenau gerendert.
-– Die Verwendung eines IME innerhalb des Terminals wurde erheblich verbessert.
-– Die Farbschemas in Ihrer JSON-Datei sind jetzt viel einfacher.
-– Eine Reihe von Fehlern im Zusammenhang mit der URL-Verarbeitung, Zeilen mit doppelter Breite, Zeilenumbruch und mehr wurden behoben.
+– Wir haben umgeschrieben, wie Konsolenanwendungen im Terminal gehostet werden! Melden Sie alle auftretenden Fehler.
+– Terminal unterstützt jetzt Sixels!
+– Sie können jetzt einen angedockten Bereich öffnen, der Ausschnitte von Befehlen enthält, die Sie gespeichert haben, um sie später zu verwenden.
+– Für Benutzer der Eingabeaufforderung der neuesten Version von Windows 11 wird möglicherweise ein QuickInfo-Symbol angezeigt, das installierbare Software von WinGet vorschlägt.
+– Ausgewählter Text wird jetzt viel sichtbarer (und anpassbarer!).
+- Eine Reihe von Zuverlässigkeitsfehlern, Benutzerfreundlichkeitsproblemen und Ärgernissen wurden behoben.
 
 Weitere Informationen finden Sie auf unserer GitHub-Releaseseite.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/en-US/PDP.xml

@@ -56,12 +56,12 @@ This is an open source project and we welcome community participation. To partic
   <ReleaseNotes _locID="App_ReleaseNotes">
     <!-- _locComment_text="{MaxLength=1500} {Locked=__VERSION_NUMBER__} App Release Note" -->Version __VERSION_NUMBER__
 
-- Terminal will now remember the contents of the window when you use session restoration.
-- You can now use multiple fonts at the same time.
-- Box-drawing characters are now rendered with pixel perfection.
-- The experience of using an IME inside Terminal has been significantly improved.
-- The color schemes inside your JSON file will now be much simpler.
-- A number of bugs around URL handling, double-width rows, line wrapping, and more have been fixed.
+- We've rewritten how console applications are hosted inside Terminal! Please report any bugs you encounter.
+- Terminal now supports Sixels!
+- You can now open a docked panel containing snippets of commands you have saved to use later
+- Command Prompt users on the latest Windows 11 release may see a "quick tip" icon that suggests installable software from WinGet
+- Selected text will now be much more visible (and customizable!)
+- A number of reliabilty bugs, convenience issues and annoyances have been fixed.
 
 Please see our GitHub releases page for additional details.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/es-ES/PDP.xml

@@ -56,12 +56,12 @@ Este es un proyecto de fuente abierta y animamos a la comunidad a participar. Pa
   <ReleaseNotes>
     Versión __VERSION_NUMBER__
 
-- Terminal recordará ahora el contenido de la ventana cuando use la restauración de la sesión.
-- Ahora puede usar varias fuentes al mismo tiempo.
-- Los caracteres que dibujan recuadros ahora se representan con precisión de píxel.
-- Se ha mejorado significativamente la experiencia de utilizar un IME dentro de Terminal.
-- Las combinaciones de colores dentro del archivo JSON ahora serán mucho más sencillas.
-- Se han corregido varios errores relacionados con el control de direcciones URL, las filas de ancho doble, el ajuste de líneas y mucho más.
+- Hemos reescrito cómo se hospedan las aplicaciones de consola en Terminal. Informe de los errores que encuentre.
+- Terminal ahora admite síxeles.
+- Ahora puede abrir un panel acoplado que contenga fragmentos de comandos que haya guardado para usarlos más adelante
+- Los usuarios del símbolo del sistema de la versión más reciente de Windows 11 pueden ver un icono de "sugerencia rápida" que sugiere software instalable de WinGet
+- El texto seleccionado ahora será mucho más visible (y personalizable)
+- Se han corregido varios errores de fiabilidad, problemas de comodidad y molestias.
 
 Consulte la página de versiones de GitHub para más información.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/fr-FR/PDP.xml

@@ -56,14 +56,14 @@ Il s’agit d’un projet open source et nous encourageons la participation à l
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-- Le terminal mémorisera désormais le contenu de la fenêtre lorsque vous utiliserez la restauration de session.
-- Vous pouvez désormais utiliser plusieurs polices en même temps.
-- Les personnages dessinés en boîte sont désormais rendus avec une perfection de pixel.
-- L'expérience d'utilisation d'un IME dans le Terminal a été considérablement améliorée.
-- Les schémas de couleurs à l'intérieur de votre fichier JSON seront désormais beaucoup plus simples.
-- Un certain nombre de bugs concernant la gestion des URL, les lignes à double largeur, le retour à la ligne, etc. ont été corrigés.
+– Nous avons réécrit la manière dont les applications de console sont hébergées dans Terminal ! Veuillez signaler tout bogue que vous rencontrez.
+– Terminal prend désormais en charge Sixels !
+– Vous pouvez maintenant ouvrir un panneau ancré contenant des extraits de commandes que vous avez enregistrées pour les utiliser ultérieurement
+– Les utilisateurs de l’invite de commande sur la dernière version de Windows 11 peuvent voir une icône « astuce rapide » qui suggère un logiciel installable à partir de WinGet
+– Le texte sélectionné sera désormais beaucoup plus visible (et personnalisable !)
+– Un certain nombre de bogues de fiabilité, de problèmes de commodité et de désagréments ont été corrigés.
 
-Veuillez consulter notre page de versions GitHub pour plus de détails.
+Veuillez consulter notre page des versions GitHub pour découvrir d’autres détails.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/it-IT/PDP.xml

@@ -54,16 +54,16 @@ Si tratta di un progetto open source e la partecipazione della community è molt
     
   </DevStudio>
   <ReleaseNotes>
-    Versione __VERSION_NUMBER__ 
+    Versione __VERSION_NUMBER__
 
-- Il terminale ricorda ora il contenuto della finestra quando si usa il ripristino della sessione.
-- È ora possibile usare più tipi di carattere contemporaneamente.
-- I caratteri tracciati vengono ora sottoposti a rendering con pixel di perfezionamento.
-- L'esperienza di utilizzo di un IME all'interno di Terminale è stata notevolmente migliorata.
-- Le combinazioni di colori all'interno del file JSON saranno ora molto più semplici.
-- Sono stati corretti alcuni bug relativi alla gestione degli URL, alle righe a doppia larghezza, al ritorno a capo delle righe e altro ancora.
+- Abbiamo cambiato il modo in cui le applicazioni della console vengono ospitate all’interno di Terminale. Segnala eventuali bug riscontrati.
+- Ora Terminale supporta i Sixel.
+- Puoi aprire un pannello ancorato contenente frammenti di comandi salvati per usarli in seguito
+- Gli utenti che usano il prompt dei comandi nella versione più recente di Windows 11 potrebbero visualizzare un’icona di “suggerimento rapido” che consiglia il software installabile da WinGet
+- Il testo selezionato sarà ora molto più visibile, oltre che personalizzabile.
+- Sono stati risolti diversi bug di affidabilità e problemi di ordine pratico.
 
-Per altri dettagli, vedi la pagina delle versioni di GitHub.
+Per altri dettagli, vedi la pagina delle release di GitHub.
   </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/ja-JP/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     バージョン __VERSION_NUMBER__
 
-- セッションの復元を使用すると、ターミナルがウィンドウの内容を記憶するようになりました。
-- 複数のフォントを同時に使用できるようになりました。
-- ボックス描画文字がピクセル単位の精度でレンダリングされるようになりました。
-- ターミナル内での IME の使用エクスペリエンスが大幅に改善されました。
-- JSON ファイル内の配色がはるかにシンプルになりました。
-- URL 処理、二重幅の行、行の折り返しなどに関するいくつかのバグが修正されました。
+- ターミナル内でのコンソール アプリケーションのホスト方法を書き換えました。発生したバグを報告してください。
+- ターミナルで Sixels がサポートされるようになりました。
+- 後で使用するために保存したコマンドのスニペットを含むドッキング パネルを開けるようになりました
+- 最新の Windows 11 リリースのコマンド プロンプト ユーザーには、WinGet からインストール可能なソフトウェアを提案する "クイック ヒント" アイコンが表示される場合があります
+- 選択したテキストが大幅に見やすくなりました (カスタマイズも可能です)
+- 信頼性に関するバグ、利便性の問題、不快な問題の多くが修正されました。
 
 詳細については、GitHub リリース ページをご覧ください。
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/ko-KR/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     버전 __VERSION_NUMBER__
 
-- 터미널은 이제 세션 복원을 사용할 때 창의 내용을 기억합니다.
-- 이제 여러 글꼴을 동시에 사용할 수 있습니다.
-- 상자 그리기 캐릭터가 이제 픽셀 완성도로 렌더링됩니다.
-- 터미널 내에서 IME를 사용하는 환경이 크게 개선되었습니다. 
-- 이제 JSON 파일 내의 색 구성표가 훨씬 더 간단해집니다.
-- URL 처리, 이중 너비 행, 줄 바꿈 등과 관련된 여러 버그가 수정되었습니다.
+- 콘솔 애플리케이션이 터미널 내에서 호스팅되는 방법을 다시 작성했습니다. 버그가 발생하면 보고해 주세요.
+- 터미널에서 이제 Sixels를 지원합니다.
+- 이제 나중에 사용하기 위해 저장한 명령 조각이 포함된 도킹된 패널을 열 수 있습니다.
+- 최신 Windows 11 릴리스의 명령 프롬프트 사용자는 WinGet에서 설치 가능한 소프트웨어를 추천하는 "간단한 팁" 아이콘을 볼 수 있습니다.
+- 이제 선택한 텍스트가 훨씬 더 잘 보입니다(사용자 지정 가능).
+- 여러 안정성 버그, 편의성 문제, 불편 사항이 수정되었습니다.
 
 자세한 내용은 GitHub 릴리스 페이지를 참조하세요.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/pt-BR/PDP.xml

@@ -56,12 +56,12 @@ Este é um projeto de código aberto e a participação da comunidade é bem-vin
   <ReleaseNotes>
     Versão __VERSION_NUMBER__
 
-- O terminal agora se lembra do conteúdo da janela quando você usa a restauração de sessão.
-- Agora você pode usar várias fontes ao mesmo tempo.
-- Os caracteres da caixa de desenho agora são renderizados com a perfeição de pixels.
-- A experiência de usar uma IME dentro do Terminal foi significativamente aprimorada.
-- Os esquemas de cores dentro do seu arquivo JSON agora estão muito mais simples.
-- Foram corrigidos vários bugs envolvendo o tratamento de URLs, linhas de largura dupla, quebra de linha automática e muito mais.
+– Reescrevemos a forma como os aplicativos de console são hospedados no Terminal! Relate os bugs encontrados.
+– O terminal agora oferece suporte ao Sixels!
+– Agora você pode abrir um painel acoplado contendo snippets de comandos que você salvou para usar mais tarde
+– Os usuários do Prompt de Comando na versão mais recente do Windows 11 podem ver um ícone de "dica rápida", que sugere softwares instaláveis a partir do WinGet
+– O texto selecionado agora ficará muito mais visível (e personalizável!)
+– Vários bugs de confiabilidade, problemas de conveniência e incômodos foram resolvidos.
 
 Confira nossa página de lançamentos no GitHub para obter mais detalhes.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/qps-ploc/PDP.xml

@@ -56,14 +56,14 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ŧēгмíйǻŀ шιļł ñσщ řėmėmвзґ τђз ςоńţëηťŝ σƒ ŧћé ẅιⁿδőщ ẅђеή ýóύ ŭš℮ şεššîóŋ řėşτŏѓдτіόŋ. !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Ύоџ ςàⁿ ŋóώ ũşэ múľŧìφľё ƒоʼnťş àт ťħе ѕâmз тìме. !!! !!! !!! !!! !!!
-- Вό×-ðгăшĭиġ ¢ĥаяäςтеřѕ äřę ηоẁ ѓëńđêяεď ẁϊτђ φïжêĺ φėŗƒēςŧΐøй. !!! !!! !!! !!! !!! !!! !
-- Ťħέ ĕхφêŕï℮ηĉε ŏƒ ύѕïйġ ǻʼn ÎМË îńšïďê Τєřmíлäļ нαŝ ьēέň ѕιĝήîƒіčäπţŀý ĩмφґθνзđ. !!! !!! !!! !!! !!! !!! !!! !!!
-- Ťĥę čöℓοг şçђėmęš ιʼnśΐδê убџѓ ĴŠОИ ƒϊŀε ωĭŀł ʼnθω вз мúçĥ ѕїмρℓёґ. !!! !!! !!! !!! !!! !!! !!
-- Á ήũmьéŕ òƒ вµġŝ άřòūñδ ÛҐĿ ħàŋδľįйģ, ðőџъŀε-ŵĭďτђ ŗōẁš, ŀϊπė ẃяąрρΐηğ, âⁿđ мŏř℮ ĥāνě везŋ ƒï×έð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
+- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
+- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
+- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
 
-Ρļēªšê ŝέė őůг ĜīтĤųъ яëŀεäśēś рдġэ ƒõя ãδðìτϊöňãł δèτâĩĺѕ. !!! !!! !!! !!! !!! !!!
+Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/qps-ploca/PDP.xml

@@ -56,14 +56,14 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ŧēгмíйǻŀ шιļł ñσщ řėmėmвзґ τђз ςоńţëηťŝ σƒ ŧћé ẅιⁿδőщ ẅђеή ýóύ ŭš℮ şεššîóŋ řėşτŏѓдτіόŋ. !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Ύоџ ςàⁿ ŋóώ ũşэ múľŧìφľё ƒоʼnťş àт ťħе ѕâmз тìме. !!! !!! !!! !!! !!!
-- Вό×-ðгăшĭиġ ¢ĥаяäςтеřѕ äřę ηоẁ ѓëńđêяεď ẁϊτђ φïжêĺ φėŗƒēςŧΐøй. !!! !!! !!! !!! !!! !!! !
-- Ťħέ ĕхφêŕï℮ηĉε ŏƒ ύѕïйġ ǻʼn ÎМË îńšïďê Τєřmíлäļ нαŝ ьēέň ѕιĝήîƒіčäπţŀý ĩмφґθνзđ. !!! !!! !!! !!! !!! !!! !!! !!!
-- Ťĥę čöℓοг şçђėmęš ιʼnśΐδê убџѓ ĴŠОИ ƒϊŀε ωĭŀł ʼnθω вз мúçĥ ѕїмρℓёґ. !!! !!! !!! !!! !!! !!! !!
-- Á ήũmьéŕ òƒ вµġŝ άřòūñδ ÛҐĿ ħàŋδľįйģ, ðőџъŀε-ŵĭďτђ ŗōẁš, ŀϊπė ẃяąрρΐηğ, âⁿđ мŏř℮ ĥāνě везŋ ƒï×έð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
+- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
+- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
+- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
 
-Ρļēªšê ŝέė őůг ĜīтĤųъ яëŀεäśēś рдġэ ƒõя ãδðìτϊöňãł δèτâĩĺѕ. !!! !!! !!! !!! !!! !!!
+Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/qps-plocm/PDP.xml

@@ -56,14 +56,14 @@
   <ReleaseNotes>
     Vėѓѕіöй __VERSION_NUMBER__ !!! !!! !
 
-- Ŧēгмíйǻŀ шιļł ñσщ řėmėmвзґ τђз ςоńţëηťŝ σƒ ŧћé ẅιⁿδőщ ẅђеή ýóύ ŭš℮ şεššîóŋ řėşτŏѓдτіόŋ. !!! !!! !!! !!! !!! !!! !!! !!! !!!
-- Ύоџ ςàⁿ ŋóώ ũşэ múľŧìφľё ƒоʼnťş àт ťħе ѕâmз тìме. !!! !!! !!! !!! !!!
-- Вό×-ðгăшĭиġ ¢ĥаяäςтеřѕ äřę ηоẁ ѓëńđêяεď ẁϊτђ φïжêĺ φėŗƒēςŧΐøй. !!! !!! !!! !!! !!! !!! !
-- Ťħέ ĕхφêŕï℮ηĉε ŏƒ ύѕïйġ ǻʼn ÎМË îńšïďê Τєřmíлäļ нαŝ ьēέň ѕιĝήîƒіčäπţŀý ĩмφґθνзđ. !!! !!! !!! !!! !!! !!! !!! !!!
-- Ťĥę čöℓοг şçђėmęš ιʼnśΐδê убџѓ ĴŠОИ ƒϊŀε ωĭŀł ʼnθω вз мúçĥ ѕїмρℓёґ. !!! !!! !!! !!! !!! !!! !!
-- Á ήũmьéŕ òƒ вµġŝ άřòūñδ ÛҐĿ ħàŋδľįйģ, ðőџъŀε-ŵĭďτђ ŗōẁš, ŀϊπė ẃяąрρΐηğ, âⁿđ мŏř℮ ĥāνě везŋ ƒï×έð. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Ẁē'νё ŕéẁѓĭτťёñ ћοώ ĉòπşõℓε άррℓіċªťįõпѕ αяе ĥθѕťэđ įŋšιďé Ţєямїńąℓ! Рļéаšė яёροřτ αņу ьϋģš ýõμ éпćŏџήţęя. !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!
+- Ţëямΐʼnαļ ńóẃ ŝüррöятš Śїхέłś! !!! !!! !!!
+- ¥оų ĉåи ńòŵ θρėñ д đбčĸэď ράńέļ ċőлŧăīņϊňģ śⁿіφφëťś оƒ ςōмmàⁿďş ŷŏũ ĥªν℮ şåνěđ τσ üśε łαťэŗ !!! !!! !!! !!! !!! !!! !!! !!! !!! 
+- Ćοмmäлđ Рřōmφť üş℮ŗѕ öη τће ļāťëšτ Щīйđôώѕ 11 řёℓеаѕĕ måў ŝэε ά "qůïςκ ŧĭр" ιсôñ τĥдт šűğģєѕŧѕ ίńśŧăłłавļз šôƒţẁαгέ ƒґόm ЩĩйĞéţ !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!
+- Śєļèċťєď ţĕжт ωϊŀļ йǿẃ ьέ mџ¢н мǿѓε νĭŝϊъļė (άŋđ сŭŝтŏмΐżдьļē!) !!! !!! !!! !!! !!! !!! !
+- Ä ņϋmъ℮ŗ ŏƒ ѓēŀїаъïļŧÿ ьüĝś, ςôⁿνėηĭ℮иć℮ îѕšůëş ăπð âлňбγдňçėŝ ћªνε ъēёп ƒΐ×еð. !!! !!! !!! !!! !!! !!! !!! !!!
 
-Ρļēªšê ŝέė őůг ĜīтĤųъ яëŀεäśēś рдġэ ƒõя ãδðìτϊöňãł δèτâĩĺѕ. !!! !!! !!! !!! !!! !!!
+Ρĺёàŝ℮ ŝез ǿúг ĢīťНŭъ řěłεαśèŝ φāğ℮ ƒóѓ дďδітĭøиąℓ ð℮тªїľŝ. !!! !!! !!! !!! !!! !!!
    </ReleaseNotes>
   <ScreenshotCaptions>
     <!-- Valid length: 200 character limit, up to 9 elements per platform -->

build/StoreSubmission/Stable/PDPs/ru-RU/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     Версия __VERSION_NUMBER__
 
-– Терминал теперь будет запоминать содержимое окна при восстановлении сеанса.
-– Теперь вы можете использовать несколько шрифтов одновременно.
-– Символы псевдографики теперь отрисовываются с пиксельной точностью.
-– Значительно улучшена возможность использования IME внутри Терминала.
-– Цветовые схемы в JSON-файле теперь будут намного проще.
-– Исправлено несколько ошибок в обработке URL-адресов, строках двойной ширины, переносе строк и т. д.
+– Мы переписали, как консольные приложения размещаются внутри Терминала! Сообщайте о любых ошибках, с которыми вы столкнулись.
+– Терминал теперь поддерживает форматы Sixel!
+– Теперь вы можете открыть закрепленную панель, содержащую фрагменты команд, которые вы сохранили для использования в дальнейшем
+– Пользователи командной строки в новейшем выпуске Windows 11 могут увидеть значок "краткой подсказки", который предлагает устанавливаемые программы из WinGet
+– Выделенный текст теперь станет более видимым (и настраиваемым!)
+– Исправлено несколько ошибок надежности, проблем с удобством, а также устранены раздражающие моменты.
 
 Дополнительные сведения см. на странице выпусков GitHub.
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/zh-CN/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     Version __VERSION_NUMBER__
 
-- 现在，使用会话还原时，终端将记住窗口的内容。
-- 现在可以同时使用多种字体。
-- 现在以像素为单位呈现框绘图字符。
-- 在终端内使用输入法的体验已得到显著提升。
-- JSON 文件中的配色方案现在要简单得多。
-- 已修复有关 URL 处理、双倍行宽、换行等大量 bug。
+- 我们已改变主机应用程序在终端内的托管方式!请报告遇到的任何 bug。
+- 终端现在支持 Sixels!
+- 现在可以打开一个停靠面板，其中包含已保存供以后使用的命令片段
+- 最新 Windows 11 版本上的命令提示用户可能会看到“快速提示”图标，该图标建议从 WinGet 安装软件
+- 所选文本现在将具有更高的可见性(和可自定义性!)
+- 修复了许多可靠性 bug、便利性问题和令人烦恼的问题。
 
 有关其他详细信息，请参阅我们的 GitHub 发布页面。
   </ReleaseNotes>

build/StoreSubmission/Stable/PDPs/zh-TW/PDP.xml

@@ -56,12 +56,12 @@
   <ReleaseNotes>
     版本 __VERSION_NUMBER__
 
-- 當您使用工作階段還原時，終端機現在會記住視窗的內容。
-- 現在您可以同時使用多個字型。
-- 製表格圖字元現在會以完美像素模式呈現。
-- 在終端機內使用 IME 的體驗已大幅改善。
-- JSON 檔案內的色彩配置現在將變得更簡單了。
-- 已修正一些 URL 處理、雙寬度列、換行等相關錯誤。
+- 我們已重寫主機應用程式在終端機內託管的方式!請報告您遇到的錯誤。
+- 終端機現在支援 Sixels!
+- 現在，您可以開啟包含已儲存命令程式碼片段的固定面板，以供稍後使用
+- 最新 Windows 11 版本中的 [命令提示] 使用者可能會看到「快速提示」圖示，建議可自 WinGet 安裝的軟體
+- 選取的文字現在會更明顯 (且可自訂!)
+- 已修正一些可靠性錯誤、便利性問題和令人困擾的問題。
 
 如需更多詳細資訊，請參閱我們的 GitHub 發行頁面。
   </ReleaseNotes>

build/config/esrp.build.batch.wpfdotnet.json

@@ -6,6 +6,20 @@
         ],
         "SigningInfo": {
             "Operations": [
+                {
+                    "KeyCode": "CP-233904-SN",
+                    "OperationSetCode": "StrongNameSign",
+                    "ToolName": "sign",
+                    "ToolVersion": "1.0",
+                    "Parameters": []
+                },
+                {
+                    "KeyCode": "CP-233904-SN",
+                    "OperationSetCode": "StrongNameVerify",
+                    "ToolName": "sign",
+                    "ToolVersion": "1.0",
+                    "Parameters": []
+                },
                 {
                     "KeyCode": "CP-230012",
                     "OperationSetCode": "SigntoolSign",

build/config/tsa.json

@@ -1,6 +1,6 @@
 {
     "instanceUrl": "https://microsoft.visualstudio.com",
     "projectName": "OS",
-    "areaPath": "OS\\Windows Client and Services\\WinPD\\DEEP-Developer Experience, Ecosystem and Partnerships\\SHINE\\Terminal",
+    "areaPath": "OS\\Windows Client and Services\\WinPD\\DFX-Developer Fundamentals and Experiences\\DEFT\\SHINE\\Terminal",
     "notificationAliases": ["condev@microsoft.com", "duhowett@microsoft.com"]
 }

build/packages.config

@@ -1,6 +1,5 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
-  <package id="MUXCustomBuildTasks" version="1.0.48" targetFramework="native" />
   <package id="Microsoft.Taef" version="10.93.240607003" targetFramework="native" />
   <package id="Microsoft.Internal.PGO-Helpers.Cpp" version="0.2.34" targetFramework="native" />
   <package id="Microsoft.Debugging.Tools.PdbStr" version="20220617.1556.0" targetFramework="native" />

build/pipelines/ci-caching.yml

@@ -84,7 +84,7 @@ stages:
             buildEverything: true
             keepAllExpensiveBuildOutputs: false
             ${{ if eq(variables['System.PullRequest.IsFork'], 'False') }}:
-              enableCaching: true
+              enableMsBuildCaching: true
 
     - ${{ if eq(parameters.runTests, true) }}:
       - stage: Test_${{ platform }}

build/pipelines/ci.yml

@@ -25,6 +25,8 @@ pr:
 variables:
   - name: runCodesignValidationInjectionBG
     value: false
+  - name: EnablePipelineCache 
+    value: true
 
 #     0.0.yyMM.dd##
 #     0.0.1904.0900
@@ -45,6 +47,10 @@ parameters:
       - x64
       - x86
       - arm64
+  - name: enableMsBuildCaching
+    type: boolean
+    displayName: "Enable MSBuild Caching"
+    default: true
 
 stages:
   - ${{ if eq(parameters.auditMode, true) }}:
@@ -87,6 +93,8 @@ stages:
             buildConfigurations: [Release]
             buildEverything: true
             keepAllExpensiveBuildOutputs: false
+            ${{ if eq(variables['System.PullRequest.IsFork'], 'False') }}:
+              enableMsBuildCaching: ${{ parameters.enableMsBuildCaching }}
 
     - ${{ if eq(parameters.runTests, true) }}:
       - stage: Test_${{ platform }}

build/pipelines/daily-loc-submission.yml

@@ -47,7 +47,7 @@ steps:
     git config --local core.autocrlf true
   displayName: Prepare git submission environment
 
-- task: MicrosoftTDBuild.tdbuild-task.tdbuild-task.TouchdownBuildTask@3
+- task: MicrosoftTDBuild.tdbuild-task.tdbuild-task.TouchdownBuildTask@5
   displayName: 'Touchdown Build - 7105, PRODEXT'
   inputs:
     teamId: 7105

build/pipelines/ob-nightly.yml

@@ -37,6 +37,8 @@ extends:
       akvName: $(SigningAKVName)
       authCertName: $(SigningAuthCertName)
       signCertName: $(SigningSignCertName)
+      useManagedIdentity: $(SigningUseManagedIdentity)
+      clientId: $(SigningOriginalClientId)
     publishSymbolsToPublic: true
     publishVpackToWindows: false
     symbolExpiryTime: 15
@@ -48,6 +50,7 @@ extends:
           parameters:
             pool: { type: windows }
             variables:
+              ob_sdl_prefast_enabled: false # This is a collection of powershell scripts
               ob_git_checkout: false # This job checks itself out
               ob_git_skip_checkout_none: true
               ob_outputDirectory: "$(Build.SourcesDirectory)/_none"

build/pipelines/ob-release.yml

@@ -85,6 +85,8 @@ extends:
       akvName: $(SigningAKVName)
       authCertName: $(SigningAuthCertName)
       signCertName: $(SigningSignCertName)
+      useManagedIdentity: $(SigningUseManagedIdentity)
+      clientId: $(SigningOriginalClientId)
     terminalInternalPackageVersion: ${{ parameters.terminalInternalPackageVersion }}
     publishSymbolsToPublic: ${{ parameters.publishSymbolsToPublic }}
     publishVpackToWindows: ${{ parameters.publishVpackToWindows }}

build/pipelines/templates-v2/job-build-project.yml

@@ -68,7 +68,7 @@ parameters:
   - name: signingIdentity
     type: object
     default: {}
-  - name: enableCaching
+  - name: enableMsBuildCaching
     type: boolean
     default: false
 
@@ -144,7 +144,7 @@ jobs:
       }
     displayName: Prepare Build and Sign Targets
 
-  - ${{ if eq(parameters.enableCaching, true) }}:
+  - ${{ if eq(parameters.enableMsBuildCaching, true) }}:
     - pwsh: |-
         $MSBuildCacheParameters = ""
         $MSBuildCacheParameters += " -graph"
@@ -183,7 +183,7 @@ jobs:
       configuration: $(BuildConfiguration)
       msbuildArchitecture: x64
       maximumCpuCount: true
-    ${{ if eq(parameters.enableCaching, true) }}:
+    ${{ if eq(parameters.enableMsBuildCaching, true) }}:
       env:
         SYSTEM_ACCESSTOKEN: $(System.AccessToken)
 
@@ -192,7 +192,7 @@ jobs:
       artifact: logs-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.artifactStem }}
       condition: always()
       displayName: Publish Build Log
-    - ${{ if eq(parameters.enableCaching, true) }}:
+    - ${{ if eq(parameters.enableMsBuildCaching, true) }}:
       - publish: $(Build.SourcesDirectory)\MSBuildCacheLogs
         artifact: logs-msbuildcache-$(BuildPlatform)-$(BuildConfiguration)${{ parameters.artifactStem }}
         condition: always()
@@ -203,7 +203,7 @@ jobs:
       inputs:
         contents: $(Build.SourcesDirectory)/msbuild.binlog
         TargetFolder: $(Terminal.BinDir)
-    - ${{ if eq(parameters.enableCaching, true) }}:
+    - ${{ if eq(parameters.enableMsBuildCaching, true) }}:
       - task: CopyFiles@2
         displayName: Copy MSBuildCache Logs
         inputs:

build/pipelines/templates-v2/job-deploy-to-azure-storage.yml

@@ -75,10 +75,22 @@ jobs:
       }
     displayName: "Wrangle Unpackaged builds into place, rename"
 
-  - powershell: |-
-      Get-PackageProvider -Name NuGet -ForceBootstrap
-      Install-Module -Verbose -AllowClobber -Force Az.Accounts, Az.Storage, Az.Network, Az.Resources, Az.Compute
-    displayName: Install Azure Module Dependencies
+  - task: PowerShell@2
+    displayName: Install Azure Modules from custom PowerShell Gallery Repo
+    env:
+      SYSTEM_ACCESSTOKEN: $(System.AccessToken)
+    inputs:
+      pwsh: false # We are preparing modules for AzureFileCopy, which uses PowerShell 5.1
+      targetType: inline
+      script: |-
+        $MachineToken = $env:SYSTEM_ACCESSTOKEN | ConvertTo-SecureString -AsPlainText -Force
+        $Credential = [PSCredential]::new("ONEBRANCH_TOKEN", $MachineToken)
+        $MachineToken = $null
+        $Feed = "https://pkgs.dev.azure.com/shine-oss/terminal/_packaging/TerminalDependencies/nuget/v3/index.json"
+        Register-PSResourceRepository -Name "PSGalleryUpstream" -Uri $Feed -Trusted
+        Get-PSResourceRepository
+
+        Install-PSResource -Name Az.Accounts, Az.Storage, Az.Network, Az.Resources, Az.Compute -Repository "PSGalleryUpstream" -Credential $Credential
 
   - task: AzureFileCopy@6
     displayName: Publish to Storage Account

build/pipelines/templates-v2/job-merge-msix-into-bundle.yml

@@ -147,6 +147,10 @@ jobs:
         ValidateSignature: true
         Verbosity: 'Verbose'
 
+  - pwsh: |-
+      tar -c -v --format=zip -f "$(JobOutputDirectory)/GroupPolicyTemplates_$(XES_APPXMANIFESTVERSION).zip" -C "$(Build.SourcesDirectory)/policies" *
+    displayName: Package GPO Templates
+
   - ${{ parameters.afterBuildSteps }}
 
   - ${{ if eq(parameters.publishArtifacts, true) }}:

build/pipelines/templates-v2/job-pgo-build-nuget-and-publish.yml

@@ -30,7 +30,7 @@ jobs:
   steps:
   - checkout: self
     clean: true
-    # It is important that this be 0, otherwise git will not fetch the branch ref names that the PGO rules require.
+    # It is important that this be 0; otherwise, git will not fetch the branch ref names that the PGO rules require.
     fetchDepth: 0
     submodules: false
     persistCredentials: false

build/pipelines/templates-v2/job-publish-symbols-using-symbolrequestprod-api.yml

@@ -52,11 +52,6 @@ jobs:
       itemPattern: '**/*.pdb'
       targetPath: '$(Build.SourcesDirectory)/bin'
 
-  - powershell: |-
-      Get-PackageProvider -Name NuGet -ForceBootstrap
-      Install-Module -Verbose -AllowClobber -Force Az.Accounts, Az.Storage, Az.Network, Az.Resources, Az.Compute
-    displayName: Install Azure Module Dependencies
-
   # Transit the Azure token from the Service Connection into a secret variable for the rest of the pipeline to use.
   - task: AzurePowerShell@5
     displayName: Generate an Azure Token
@@ -66,7 +61,7 @@ jobs:
       pwsh: true
       ScriptType: InlineScript
       Inline: |-
-        $AzToken = (Get-AzAccessToken -ResourceUrl api://30471ccf-0966-45b9-a979-065dbedb24c1).Token
+        $AzToken = (Get-AzAccessToken -AsSecureString -ResourceUrl api://30471ccf-0966-45b9-a979-065dbedb24c1).Token | ConvertFrom-SecureString -AsPlainText
         Write-Host "##vso[task.setvariable variable=SymbolAccessToken;issecret=true]$AzToken"
 
 

build/pipelines/templates-v2/pipeline-onebranch-full-release-build.yml

@@ -78,7 +78,9 @@ extends:
     template: v2/Microsoft.NonOfficial.yml@templates
   parameters:
     featureFlags:
-      WindowsHostVersion: 1ESWindows2022
+      WindowsHostVersion:
+        Version: 2022
+        Network: R1
     platform:
       name: 'windows_undocked'
       product: 'Windows Terminal'
@@ -86,6 +88,9 @@ extends:
       enabled: false
     globalSdl: # https://aka.ms/obpipelines/sdl
       enableCheckCFlags: false # CheckCFlags is broken and exploding our builds; to remove, :g/BAD-FLAGS/d
+      isNativeCode: true
+      prefast:
+        enabled: true
       asyncSdl:
         enabled: true
         tsaOptionsFile: 'build/config/tsa.json'
@@ -113,6 +118,8 @@ extends:
               variables:
                 ob_sdl_checkcflags_enabled: false # BAD-FLAGS
                 ob_sdl_xfgcheck_enabled: false # BAD-FLAGS
+                ob_sdl_prefast_runDuring: Build
+                ob_sdl_checkCompliantCompilerWarnings: true
                 ob_git_checkout: false # This job checks itself out
                 ob_git_skip_checkout_none: true
                 ob_outputDirectory: $(JobOutputDirectory)
@@ -147,6 +154,7 @@ extends:
                 variables:
                   ob_sdl_checkcflags_enabled: false # BAD-FLAGS
                   ob_sdl_xfgcheck_enabled: false # BAD-FLAGS
+                  ob_sdl_prefast_enabled: false # This is a C# build job
                   ob_git_checkout: false # This job checks itself out
                   ob_git_skip_checkout_none: true
                   ob_outputDirectory: $(JobOutputDirectory)
@@ -178,6 +186,7 @@ extends:
                 variables:
                   ob_sdl_checkcflags_enabled: false # BAD-FLAGS
                   ob_sdl_xfgcheck_enabled: false # BAD-FLAGS
+                  ob_sdl_prefast_enabled: false # This is a collection of powershell scripts
                   ob_git_checkout: false # This job checks itself out
                   ob_git_skip_checkout_none: true
                   ob_outputDirectory: $(JobOutputDirectory)
@@ -232,6 +241,7 @@ extends:
                 variables:
                   ob_sdl_checkcflags_enabled: false # BAD-FLAGS
                   ob_sdl_xfgcheck_enabled: false # BAD-FLAGS
+                  ob_sdl_prefast_enabled: false # This is a collection of powershell scripts
                   ob_git_checkout: false # This job checks itself out
                   ob_git_skip_checkout_none: true
                   ob_outputDirectory: $(JobOutputDirectory)
@@ -250,6 +260,7 @@ extends:
                 variables:
                   ob_sdl_checkcflags_enabled: false # BAD-FLAGS
                   ob_sdl_xfgcheck_enabled: false # BAD-FLAGS
+                  ob_sdl_prefast_enabled: false # This is a collection of powershell scripts
                   ob_git_checkout: false # This job checks itself out
                   ob_git_skip_checkout_none: true
                   ob_outputDirectory: $(JobOutputDirectory)
@@ -275,6 +286,7 @@ extends:
               variables:
                 ob_sdl_checkcflags_enabled: false # BAD-FLAGS
                 ob_sdl_xfgcheck_enabled: false # BAD-FLAGS
+                ob_sdl_prefast_enabled: false # This is a collection of powershell scripts
                 ob_git_checkout: false # This job checks itself out
                 ob_git_skip_checkout_none: true
                 ob_outputDirectory: $(Build.ArtifactStagingDirectory)

build/pipelines/templates-v2/steps-ensure-nuget-version.yml

@@ -1,5 +1,12 @@
 steps:
-- task: NuGetToolInstaller@1
-  displayName: Use NuGet 6.6.1
-  inputs:
-    versionSpec: 6.6.1
+- ${{ if eq(variables['System.CollectionId'], 'cb55739e-4afe-46a3-970f-1b49d8ee7564') }}:
+  - pwsh: |-
+      Write-Host "Assuming NuGet is already installed..."
+      & nuget.exe help
+    displayName: Assume NuGet is fine
+
+- ${{ else }}:
+  - task: NuGetToolInstaller@1
+    displayName: Use NuGet 6.6.1
+    inputs:
+      versionSpec: 6.6.1

build/pipelines/templates-v2/steps-esrp-signing.yml

@@ -19,4 +19,6 @@ steps:
       AuthAKVName: ${{ parameters.signingIdentity.akvName }}
       AuthCertName: ${{ parameters.signingIdentity.authCertName }}
       AuthSignCertName: ${{ parameters.signingIdentity.signCertName }}
+      UseMSIAuthentication: ${{ coalesce(parameters.signingIdentity.useManagedIdentity, 'false') }}
+      EsrpClientId: ${{ parameters.signingIdentity.clientId }}
       ${{ insert }}: ${{ parameters.inputs }}

build/scripts/New-UnpackagedTerminalDistribution.ps1

@@ -34,7 +34,7 @@ Param(
 )
 
 $filesToRemove = @("*.xml", "*.winmd", "Appx*", "Images/*Tile*", "Images/*Logo*") # Remove from Terminal
-$filesToKeep = @("Microsoft.Terminal.Remoting.winmd") # ... except for these
+$filesToKeep = @() # ... except for these
 $filesToCopyFromXaml = @("Microsoft.UI.Xaml.dll", "Microsoft.UI.Xaml") # We don't need the .winmd
 
 $ErrorActionPreference = 'Stop'

build/scripts/Set-LatestVCToolsVersion.ps1

@@ -1,8 +1,28 @@
 $VSInstances = ([xml](& 'C:\Program Files (x86)\Microsoft Visual Studio\Installer\vswhere.exe' -latest -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64 -include packages -format xml))
 $VSPackages = $VSInstances.instances.instance.packages.package
-$LatestVCPackage = ($VSInstances.instances.instance.packages.package | ? { $_.id -eq "Microsoft.VisualCpp.CRT.Source" })
+$LatestVCPackage = ($VSPackages | ? { $_.id -eq "Microsoft.VisualCpp.Tools.Core" })
 $LatestVCToolsVersion = $LatestVCPackage.version;
 
+$VSRoot = (& 'C:\Program Files (x86)\Microsoft Visual Studio\Installer\vswhere.exe' -latest -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64 -property 'resolvedInstallationPath')
+$VCToolsRoot = Join-Path $VSRoot "VC\Tools\MSVC"
+
+# We have observed a few instances where the VC tools package version actually
+# differs from the version on the files themselves. We might as well check
+# whether the version we just found _actually exists_ before we use it.
+# We'll use whichever highest version exists.
+$PackageVCToolPath = Join-Path $VCToolsRoot $LatestVCToolsVersion
+If ($Null -Eq (Get-Item $PackageVCToolPath -ErrorAction:Ignore)) {
+    $VCToolsVersions = Get-ChildItem $VCToolsRoot | ForEach-Object {
+        [Version]$_.Name
+    } | Sort -Descending
+    $LatestActualVCToolsVersion = $VCToolsVersions | Select -First 1
+
+    If ([Version]$LatestVCToolsVersion -Ne $LatestActualVCToolsVersion) {
+        Write-Output "VC Tools Mismatch: Directory = $LatestActualVCToolsVersion, Package = $LatestVCToolsVersion"
+        $LatestVCToolsVersion = $LatestActualVCToolsVersion.ToString(3)
+    }
+}
+
 Write-Output "Latest VCToolsVersion: $LatestVCToolsVersion"
 Write-Output "Updating VCToolsVersion environment variable for job"
 Write-Output "##vso[task.setvariable variable=VCToolsVersion]$LatestVCToolsVersion"

build/scripts/Test-WindowsTerminalPackage.ps1

@@ -58,7 +58,7 @@ Try {
 
     ### Check the activatable class entries for a few DLLs we need.
     $inProcServers = $Manifest.Package.Extensions.Extension.InProcessServer.Path
-    $RequiredInProcServers = ("TerminalApp.dll", "Microsoft.Terminal.Control.dll", "Microsoft.Terminal.Remoting.dll", "Microsoft.Terminal.Settings.Editor.dll", "Microsoft.Terminal.Settings.Model.dll", "TerminalConnection.dll")
+    $RequiredInProcServers = ("TerminalApp.dll", "Microsoft.Terminal.Control.dll", "Microsoft.Terminal.Settings.Editor.dll", "Microsoft.Terminal.Settings.Model.dll", "TerminalConnection.dll")
 
     Write-Verbose "InProc Servers: $inProcServers"
 

consolegit2gitfilters.json

@@ -24,8 +24,6 @@
     "/doc/specs/",
     "/doc/cascadia/",
     "/doc/user-docs/",
-    "/src/tools/MonarchPeasantSample/",
-    "/src/tools/MonarchPeasantPackage/",
     "/src/tools/ansi-color/",
     "/src/tools/ColorTool/",
     "/scratch/",

custom.props

@@ -3,9 +3,12 @@
   <!-- This file is read by XES, which we use in our Release builds. -->
   <PropertyGroup Label="Version">
     <XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
-    <XesBaseYearForStoreVersion>2024</XesBaseYearForStoreVersion>
+    <XesBaseYearForStoreVersion>2025</XesBaseYearForStoreVersion>
     <VersionMajor>1</VersionMajor>
-    <VersionMinor>23</VersionMinor>
+    <VersionMinor>24</VersionMinor>
     <VersionInfoProductName>Windows Terminal</VersionInfoProductName>
+    <VersionInfoCulture>1033</VersionInfoCulture>
+    <!-- The default has a spacing problem -->
+    <VersionInfoCopyRight>\xa9 Microsoft Corporation. All rights reserved.</VersionInfoCopyRight>
   </PropertyGroup>
 </Project>

dep/nuget/packages.config

@@ -20,7 +20,7 @@
   <package id="Selenium.WebDriver" version="3.5.0" targetFramework="net45" />
 
   <!-- MSBuildCache -->
-  <package id="Microsoft.MSBuildCache.AzurePipelines" version="0.1.283-preview" />
-  <package id="Microsoft.MSBuildCache.Local" version="0.1.283-preview" />
-  <package id="Microsoft.MSBuildCache.SharedCompilation" version="0.1.283-preview" />
+  <package id="Microsoft.MSBuildCache.AzurePipelines" version="0.1.318-preview" />
+  <package id="Microsoft.MSBuildCache.Local" version="0.1.318-preview" />
+  <package id="Microsoft.MSBuildCache.SharedCompilation" version="0.1.318-preview" />
 </packages>

dep/vcpkg-overlay-ports/fmt/fix-write-batch.patch

@@ -0,0 +1,13 @@
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 88c12148..967b53dd 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -260,7 +260,7 @@ if (FMT_MASTER_PROJECT AND CMAKE_GENERATOR MATCHES "Visual Studio")
+   join(netfxpath
+        "C:\\Program Files\\Reference Assemblies\\Microsoft\\Framework\\"
+        ".NETFramework\\v4.0")
+-  file(WRITE run-msbuild.bat "
++  file(WRITE "${CMAKE_BINARY_DIR}/run-msbuild.bat" "
+     ${MSBUILD_SETUP}
+     ${CMAKE_MAKE_PROGRAM} -p:FrameworkPathOverride=\"${netfxpath}\" %*")
+ endif ()

dep/vcpkg-overlay-ports/fmt/portfile.cmake

@@ -0,0 +1,38 @@
+vcpkg_from_github(
+    OUT_SOURCE_PATH SOURCE_PATH
+    REPO fmtlib/fmt
+    REF "${VERSION}"
+    SHA512 573b7de1bd224b7b1b60d44808a843db35d4bc4634f72a9edcb52cf68e99ca66c744fd5d5c97b4336ba70b94abdabac5fc253b245d0d5cd8bbe2a096bf941e39
+    HEAD_REF master
+    PATCHES
+        fix-write-batch.patch
+)
+
+vcpkg_cmake_configure(
+    SOURCE_PATH "${SOURCE_PATH}"
+    OPTIONS
+        -DFMT_CMAKE_DIR=share/fmt
+        -DFMT_TEST=OFF
+        -DFMT_DOC=OFF
+        -DFMT_PEDANTIC=ON
+)
+
+vcpkg_cmake_install()
+vcpkg_cmake_config_fixup()
+vcpkg_fixup_pkgconfig()
+vcpkg_copy_pdbs()
+
+if(VCPKG_LIBRARY_LINKAGE STREQUAL dynamic)
+    vcpkg_replace_string("${CURRENT_PACKAGES_DIR}/include/fmt/base.h"
+        "defined(FMT_SHARED)"
+        "1"
+    )
+endif()
+
+file(REMOVE_RECURSE
+    "${CURRENT_PACKAGES_DIR}/debug/include"
+    "${CURRENT_PACKAGES_DIR}/debug/share"
+)
+
+file(INSTALL "${CMAKE_CURRENT_LIST_DIR}/usage" DESTINATION "${CURRENT_PACKAGES_DIR}/share/${PORT}")
+vcpkg_install_copyright(FILE_LIST "${SOURCE_PATH}/LICENSE")

dep/vcpkg-overlay-ports/fmt/usage

@@ -0,0 +1,8 @@
+The package fmt provides CMake targets:
+
+    find_package(fmt CONFIG REQUIRED)
+    target_link_libraries(main PRIVATE fmt::fmt)
+
+    # Or use the header-only version
+    find_package(fmt CONFIG REQUIRED)
+    target_link_libraries(main PRIVATE fmt::fmt-header-only)

dep/vcpkg-overlay-ports/fmt/vcpkg.json

@@ -0,0 +1,17 @@
+{
+  "name": "fmt",
+  "version": "11.1.4",
+  "description": "{fmt} is an open-source formatting library providing a fast and safe alternative to C stdio and C++ iostreams.",
+  "homepage": "https://github.com/fmtlib/fmt",
+  "license": "MIT",
+  "dependencies": [
+    {
+      "name": "vcpkg-cmake",
+      "host": true
+    },
+    {
+      "name": "vcpkg-cmake-config",
+      "host": true
+    }
+  ]
+}

dep/vcpkg-overlay-triplets/fuzzing/arm64-windows-static.cmake

@@ -0,0 +1,6 @@
+set(VCPKG_TARGET_ARCHITECTURE arm64)
+set(VCPKG_CRT_LINKAGE static)
+set(VCPKG_LIBRARY_LINKAGE static)
+
+set(VCPKG_CXX_FLAGS /fsanitize=address)
+set(VCPKG_C_FLAGS /fsanitize=address)

dep/vcpkg-overlay-triplets/fuzzing/x64-windows-static.cmake

@@ -0,0 +1,6 @@
+set(VCPKG_TARGET_ARCHITECTURE x64)
+set(VCPKG_CRT_LINKAGE static)
+set(VCPKG_LIBRARY_LINKAGE static)
+
+set(VCPKG_CXX_FLAGS /fsanitize=address)
+set(VCPKG_C_FLAGS /fsanitize=address)

dep/vcpkg-overlay-triplets/fuzzing/x86-windows-static.cmake

@@ -0,0 +1,6 @@
+set(VCPKG_TARGET_ARCHITECTURE x86)
+set(VCPKG_CRT_LINKAGE static)
+set(VCPKG_LIBRARY_LINKAGE static)
+
+set(VCPKG_CXX_FLAGS /fsanitize=address)
+set(VCPKG_C_FLAGS /fsanitize=address)

doc/Niksa.md

@@ -15,7 +15,7 @@ This document serves as a storage point for those posts.
 ## <a name="cmd"></a>Why do we avoid changing CMD.exe?
 `setlocal` doesn't behave the same way as an environment variable. It's a thing that would have to be put in at the top of the batch script that is `somefile.cmd` as one of its first commands to adjust the way that one specific batch file is processed by the `cmd.exe` engine. That's probably not suitable for your needs, but that's the way we have to go.
 
-I don't think anyone is disagreeing with you, @mikemaccana, that this would be a five minute development change to read that environment variable and change the behavior of `cmd.exe`. It absolutely would be a tiny development time. 
+I don't think anyone is disagreeing with you, @mikemaccana, that this would be a five minute development change to read that environment variable and change the behavior of `cmd.exe`. It absolutely would be a tiny development time.
 
 It's just that from our experience, we know there's going to be a 3-24 month bug tail here where we get massive investigation callbacks by some billion dollar enterprise customer who for whatever reason was already using the environment variable we pick for another purpose. Their script that they give their rank-and-file folks will tell them to press Ctrl+C at some point in the batch script to do whatever happens, it will do something different, those people will notice the script doesn't match the computer anymore. They will then halt the production line and tell their supervisor. The supervisor tells some director. Their director comes screaming at their Microsoft enterprise support contract person that we've introduced a change to the OS that is costing them millions if not billions of dollars in shipments per month. Our directors at Microsoft then come bashing down our doors angry with us and make us fix it ASAP or revert it, we don't get to go home at 5pm to our families or friends because we're fixing it, we get stressed the heck out, we have to spin up servicing potentially for already shipped operating systems which is expensive and headache-causing...etc.
 
@@ -27,7 +27,7 @@ I would highly recommend that Gulp convert to using PowerShell scripts and that
 
 Original Source: https://github.com/microsoft/terminal/issues/217#issuecomment-404240443
 
-_Addendum_: cmd.exe is the literal embodiment of [xkcd#1172]([url](https://xkcd.com/1172/)). Every change, no matter how small, will break _someone_. 
+_Addendum_: cmd.exe is the literal embodiment of [xkcd#1172]([url](https://xkcd.com/1172/)). Every change, no matter how small, will break _someone_.
 
 ## <a name="screenPerf"></a>Why is typing-to-screen performance better than every other app?
 
@@ -37,33 +37,33 @@ Also, I'm happy to discuss this with you until you're utterly sick of reading it
 
 If I had to take an educated guess as to what is making us faster than pretty much any other application on Windows at putting your text on the screen... I would say it is because that is literally our only job! Also probably because we are using darn near the oldest and lowest level APIs that Windows has to accomplish this work.
 
-Pretty much everything else you've listed has some sort of layer or framework involved, or many, many layers and frameworks, when you start talking about Electron and JavaScript. We don't. 
+Pretty much everything else you've listed has some sort of layer or framework involved, or many, many layers and frameworks, when you start talking about Electron and JavaScript. We don't.
 
-We have one bare, super un-special window with no additional controls attached to it. We get our keys fed into us from just barely above the kernel given that we're processing them from window messages and not from some sort of eventing framework common to pretty much any other more complicated UI framework than ours (WPF, WinForms, UWP, Electron). And we dump our text straight onto the window surface using GDI's [PolyTextOut](https://docs.microsoft.com/en-us/windows/desktop/api/wingdi/nf-wingdi-polytextoutw) with no frills. 
+We have one bare, super un-special window with no additional controls attached to it. We get our keys fed into us from just barely above the kernel given that we're processing them from window messages and not from some sort of eventing framework common to pretty much any other more complicated UI framework than ours (WPF, WinForms, UWP, Electron). And we dump our text straight onto the window surface using GDI's [PolyTextOut](https://docs.microsoft.com/en-us/windows/desktop/api/wingdi/nf-wingdi-polytextoutw) with no frills.
 
 Even `notepad.exe` has multiple controls on its window at the very least and is probably (I haven't looked) using some sort of library framework in the edit control to figure out its text layout (which probably is using another library framework for internationalization support...)
 
-Of course this also means that we have trade offs. We don't support fully international text like pretty much every other application will. RTL? No go zone right now. Surrogate pairs and emoji? We're getting there but not there yet. Indic scripts? Nope. 
+Of course this also means that we have trade offs. We don't support fully international text like pretty much every other application will. RTL? No go zone right now. Surrogate pairs and emoji? We're getting there but not there yet. Indic scripts? Nope.
 
 Why are we like this? For one, `conhost.exe` is old as dirt. It has to use the bare metal bottom layer of everything because it was created before most of those other frameworks were created. And also it maintains as low/bottom level as possible because it is pretty much the first thing that one needs to bring up when bringing up a new operating system edition or device before you have all the nice things like frameworks or what those frameworks require to operate. Also it's written in C/C++ which is about as low and bare metal as we can get.
 
-Will this UI enhancement come to other apps on Windows? Almost certainly not. They have too much going on which is both a good and a bad thing. I'm jealous of their ability to just call one method and layout text in an uncomplicated manner in any language without manually calculating pixels or caring about what styles apply to their font. But my manual pixel calculations, dirty region math, scroll region madness, and more makes it so we go faster than them. I'm also jealous that when someone says "hey can you add a status bar to the bottom of your window" that they can pretty much click and drag that into place with their UI Framework and it will just work where as for us, it's been a backlog item forever and gives me heartburn to think about implementing. 
+Will this UI enhancement come to other apps on Windows? Almost certainly not. They have too much going on which is both a good and a bad thing. I'm jealous of their ability to just call one method and layout text in an uncomplicated manner in any language without manually calculating pixels or caring about what styles apply to their font. But my manual pixel calculations, dirty region math, scroll region madness, and more makes it so we go faster than them. I'm also jealous that when someone says "hey can you add a status bar to the bottom of your window" that they can pretty much click and drag that into place with their UI Framework and it will just work whereas for us, it's been a backlog item forever and gives me heartburn to think about implementing.
 
-Will we try to keep it from regressing? Yes! Right now it's sort of a manual process. We identify that something is getting slow and then we go haul out [WPR](https://docs.microsoft.com/en-us/windows-hardware/test/wpt/windows-performance-recorder) and start taking traces. We stare down the hot paths and try to reason out what is going on and then improve them. For instance, in the last cycle or two, we focused on heap allocations as a major area where we could improve our end-to-end performance, changing a ton of our code to use stack-constructed iterator-like facades over the underlying request buffer instead of translating and allocating it into a new heap space for each level of processing. 
+Will we try to keep it from regressing? Yes! Right now it's sort of a manual process. We identify that something is getting slow and then we go haul out [WPR](https://docs.microsoft.com/en-us/windows-hardware/test/wpt/windows-performance-recorder) and start taking traces. We stare down the hot paths and try to reason out what is going on and then improve them. For instance, in the last cycle or two, we focused on heap allocations as a major area where we could improve our end-to-end performance, changing a ton of our code to use stack-constructed iterator-like facades over the underlying request buffer instead of translating and allocating it into a new heap space for each level of processing.
 
 As an aside, @bitcrazed wants us to automate performance tests in some conhost specific way, but I haven't quite figured out a controlled environment to do this in yet. The Windows Engineering System runs performance tests each night that give us a coarse-grained way of knowing if we messed something up for the whole operating system, and they technically offer a fine-grained way for us to insert our own performance tests... but I just haven't got around to that yet. If you have an idea for a way for us to do this in an automated fashion, I'm all ears.
 
-If there's anything else you'd like to know, let me know. I could go on all day. I deleted like 15 tangents from this reply before posting it.... 
+If there's anything else you'd like to know, let me know. I could go on all day. I deleted like 15 tangents from this reply before posting it....
 
 Original Source: https://github.com/microsoft/terminal/issues/327#issuecomment-447391705
 
 ## <a name="gfxMsgStack"></a>How are the Windows graphics/messaging stack assembled?
 
-@stakx, I am referring to USER32 and GDI32. 
+@stakx, I am referring to USER32 and GDI32.
 
 I'll give you a cursory overview of what I know off the top of my head without spending hours confirming the details. As such, some of this is subject to handwaving and could be mildly incorrect but is probably in the right direction. Consider every statement to be my personal knowledge on how the world works and subject to opinion or error.
 
-For the graphics part of the pipeline (GDI32), the user-mode portions of GDI are pretty far down. The app calls GDI32, some work is done in that DLL on the user-mode side, then a kernel call jumps over to the kernel and drawing occurs. 
+For the graphics part of the pipeline (GDI32), the user-mode portions of GDI are pretty far down. The app calls GDI32, some work is done in that DLL on the user-mode side, then a kernel call jumps over to the kernel and drawing occurs.
 
 The portion that you're thinking of regarding "silently converted to sit on top of other stuff" is probably that once we hit the kernel calls, a bunch of the kernel GDI stuff tends to be re-platformed on top of the same stuff as DirectX when it is actually handled by the NVIDIA/AMD/Intel/etc. graphics driver and the GPU at the bottom of the stack. I think this happened with the graphics driver re-architecture that came as a part of WDDM for Windows Vista. There's a document out there somewhere about what calls are still really fast in GDI and which are slower as a result of the re-platforming. Last time I found that document and checked, we were using the fast ones.
 
@@ -71,11 +71,11 @@ On top of GDI, I believe there are things like Common Controls or comctl32.dll w
 
 As for DirectWrite and D2D and D3D and DXGI themselves, they're a separate set of commands and paths that are completely off to the side from GDI at all both in user and kernel mode. They're not really related other than that there's some interoperability provisions between the two. Most of our other UI frameworks tend to be built on top of the DirectX stack though. XAML is for sure. I think WPF is. Not sure about WinForms. And I believe the composition stack and the window manager are using DirectX as well.
 
-As for the input/interaction part of the pipeline (USER32), I tend to find most other newer things (at least for desktop PCs) are built on top of what is already there. USER32's major concept is windows and window handles and everything is sent to a window handle. As long as you're on a desktop machine (or a laptop or whatever... I mean a classic-style Windows-powered machine), there's a window handle involved and messages floating around and that means we're talking USER32. 
+As for the input/interaction part of the pipeline (USER32), I tend to find most other newer things (at least for desktop PCs) are built on top of what is already there. USER32's major concept is windows and window handles and everything is sent to a window handle. As long as you're on a desktop machine (or a laptop or whatever... I mean a classic-style Windows-powered machine), there's a window handle involved and messages floating around and that means we're talking USER32.
 
-The window message queue is just a straight up FIFO (more or less) of whatever input has occurred relevant to that window while it's in the foreground + whatever has been sent to the window by other components in the system. 
+The window message queue is just a straight up FIFO (more or less) of whatever input has occurred relevant to that window while it's in the foreground + whatever has been sent to the window by other components in the system.
 
-The newer technologies and the frameworks like XAML and WPF and WinForms tend to receive the messages from the window message queue one way or another and process them and turn them into event callbacks to various objects that they've provisioned within their world. 
+The newer technologies and the frameworks like XAML and WPF and WinForms tend to receive the messages from the window message queue one way or another and process them and turn them into event callbacks to various objects that they've provisioned within their world.
 
 However, the newer technologies that also work on other non-desktop platforms like XAML tend to have the ability to process stuff off of a completely different non-USER32 stack as well. There's a separate parallel stack to USER32 with all of our new innovations and realizations on how input and interaction should occur that doesn't exactly deal with classic messaging queues and window handles the same way. This is the whole Core* family of things like CoreWindow and CoreMessaging. They also have a different concept of "what is a user" that isn't so centric around your butt in rolling chair in front of a screen with a keyboard and mouse on the desk.
 
@@ -83,7 +83,7 @@ Now, if you're on XAML or one of the other Frameworks... all this intricacy is h
 
 The trick is that GDI32 and USER32 were designed for a limited world with a limited set of commands. Desktop PCs were the only thing that existed, single user at the keyboard and mouse, simple graphics output to a VGA monitor. So using them directly at the "low level" like conhost does is pretty easy. The new platforms could be used at the "low level" but they're orders of magnitude more complicated because they now account for everything that has happened with personal computing in 20+ years like different form factors, multiple active users, multiple graphics adapters, and on and on and on and on. So you tend to use a framework when using the new stuff so your head doesn't explode. They handle it for you, but they handle more than they ever did before so they're slower to some degree.
 
-So are GDI32 and USER32 "lower" than the new stuff? Sort of. 
+So are GDI32 and USER32 "lower" than the new stuff? Sort of.
 Can you get that low with the newer stuff? Mostly yes, but you probably shouldn't and don't want to.
 Does new live on top of old or is old replatformed on the new? Sometimes and/or partially.
 Basically... it's like the answer to anything software... "it's an unmitigated disaster and if we all stepped back a moment, we should be astounded that it works at all." :P
@@ -94,7 +94,7 @@ Original Source: https://github.com/microsoft/terminal/issues/327#issuecomment-4
 
 ## <a name="fesb"></a>Output Processing between "Far East" and "Western"
 
-> 
+>
 > ```
 > if (WI_IsFlagSet(CharType, C1_CNTRL))
 > ```
@@ -120,7 +120,7 @@ Note in both of these, there is a little bit of indirection before `MultiByteToW
 When we took over the console codebase, this variation between "Western" and "Eastern" countries was especially painful because `conhost.exe` would choose which one it was in based on the `Codepage for Non-Unicode Applications` set in the Control Panel's Regional > Administrative panel and it could only be changed with a reboot. It wouldn't even change properly when you `chcp` to a different codepage. Heck, `chcp` would deny you from switching into many codepages. There was a block in place to prevent going to an "Eastern" codepage if you booted up in a "Western" codepage. There was also a block preventing you from going between "Eastern" codepages, if I recall correctly.
 
 In modernizing, I decided a few things:
-1. What's good for the "Far East" should be good for the rest of the world. CJK languages that encompassed the "Far East" code have to be able to handle "Western" text as well even if the reverse wasn't true. 
+1. What's good for the "Far East" should be good for the rest of the world. CJK languages that encompassed the "Far East" code have to be able to handle "Western" text as well even if the reverse wasn't true.
 2. We need to scrub all usages of "Far East" from the code. Someone already started that and replaced them with "East Asia" except then they left behind the shorthand of "FE" prefixing dozens of functions which made it hard to follow the code. It took us months to realize "FE" and "East Asia" were the same thing.
 3. It's obnoxious that the way this was handled was to literally double-define every output function in the code base to have two definitions, compile them both into the conhost, then choose to run down the SB_ versions or the FE_ versions depending on the startup Non-Unicode codepage. It was a massive pile of complex pre-compilation `#ifdef` and `#else`s that would sometimes surround individual lines in the function bodies. Gross.
 4. The fact that the FE_ versions of the functions were way slower than the SB_ ones was unacceptable even for the same output of Latin-character text.
@@ -139,13 +139,13 @@ Original Source: https://github.com/microsoft/terminal/issues/166#issuecomment-5
 
 ## <a name="backport"></a>Why do we not backport things?
 
-Someone has to prove that this is costing millions to billions of dollars of lost productivity or revenue to outweigh the risks of shipping the fix to hundreds of millions of Windows machines and potentially breaking something. 
+Someone has to prove that this is costing millions to billions of dollars of lost productivity or revenue to outweigh the risks of shipping the fix to hundreds of millions of Windows machines and potentially breaking something.
 
-Our team generally finds it pretty hard to prove that against the developer audience given that they're only a small portion of the total installed market of Windows machines. 
+Our team generally finds it pretty hard to prove that against the developer audience given that they're only a small portion of the total installed market of Windows machines.
 
 Our only backport successes really come from corporations with massive addressable market (like OEMs shipping PCs) who complain that this is fouling up their manufacturing line (or something of that ilk). Otherwise, our management typically says that the risks don't outweigh the benefits.
 
-It's also costly in terms of time, effort, and testing for us to validate a modification to a released OS. We have a mindbogglingly massive amount of automated machinery dedicated to processing and validating the things that we check in while developing the current OS builds. But it's a special costly ask to spin up some to all of those activities to validate backported fixes. We do it all the time for Patch Tuesday, but in those patches, they only pass through the minimum number of fixes required to maximize the restoration of productivity/security/revenue/etc. because every additional fix adds additional complexity and additional risk. 
+It's also costly in terms of time, effort, and testing for us to validate a modification to a released OS. We have a mindbogglingly massive amount of automated machinery dedicated to processing and validating the things that we check in while developing the current OS builds. But it's a special costly ask to spin up some to all of those activities to validate backported fixes. We do it all the time for Patch Tuesday, but in those patches, they only pass through the minimum number of fixes required to maximize the restoration of productivity/security/revenue/etc. because every additional fix adds additional complexity and additional risk.
 
 So from our little team working hard to make developers happy, we virtually never make the cut for servicing. We're sorry, but we hope you can understand. It's just the reality of the situation to say "nope" when people ask for a backport. In our team's ideal world, you would all be running the latest console bits everywhere every time we make a change. But that's just not how it is today.
 
@@ -189,7 +189,7 @@ _guest speaker @zadjii-msft_
 
 I think there might be a bit of a misunderstanding here - there are two different kinds of applications we're talking about here:
 * shell applications, like `cmd.exe`, `powershell`, `zsh`, etc. These are text-only applications that emit streams of characters. They don't care at all about how they're eventually rendered to the user. These are also sometimes referred to as "commandline client" applications.
-* terminal applications, like the Windows Terminal, gnome-terminal, xterm, iterm2, hyper. These are graphical applications that can be used to render the output of commandline clients. 
+* terminal applications, like the Windows Terminal, gnome-terminal, xterm, iterm2, hyper. These are graphical applications that can be used to render the output of commandline clients.
 
 On Windows, if you just run `cmd.exe` directly, the OS will create an instance of `conhost.exe` as the _terminal_ for `cmd.exe`. The same thing happens for `powershell.exe`, the system will create a new conhost window for any client that's not already connected to a terminal of some sort. This has lead to an enormous amount of confusion for people thinking that a conhost window is actually a "`cmd` window". `cmd` can't have a window, it's just a commandline application. Its window is always some other terminal.
 

doc/WindowsTestPasses.md

@@ -31,12 +31,12 @@ Prerequisites:
 1. Right click the machine name in the `Device Manager` list and choose `Launch T-Shell`. You can also use `Connect via Console` to get a "remote desktop"-like session to the KVM port on the VM.
 1. In T-shell, use `testd Microsoft.Console.TestLab.Desktop.testlist` or a command of that format with a different TESTLIST or TESTMD name from our project (see the [UniversalTest.md] documentation). The `testd` utility will automatically resolve the build/branch/flavor information, dig through the build shares for the matching TESTLIST/TESTMD metadata, and attempt to deploy all relevant packages and dependencies on the device. When it's successful, it will move onto running all the tests and giving you the results. On conclusion, the test results should pop up in the web browser or the `Hubble - Log Viewer` tool provided by the Engineering Systems team.
 
-If some of the above things do not work, go to [https://osgwiki.com] and type them into the Search bar. For instance, if T-Shell isn't found or working, you can find out where to get it or download it on `OSGWiki`. The same goes for the other commands besides `testd` to use in T-shell and more information on what `Hubble` or `Nebula` are. 
+If some of the above things do not work, go to [https://osgwiki.com] and type them into the Search bar. For instance, if T-Shell isn't found or working, you can find out where to get it or download it on `OSGWiki`. The same goes for the other commands besides `testd` to use in T-shell and more information on what `Hubble` or `Nebula` are.
 
 Presumably now you have a failure. Or a success. You can attempt to spelunk the logs in `Hubble` and you might come to a conclusion. Or you can move onto debugging directly.
 
-Now that you've relied on `testd` to get everything deployed and orchestrated and run once on the device, you can use `execd` to run things again or to run a smaller subset of things on the remote device through `T-Shell`. 
+Now that you've relied on `testd` to get everything deployed and orchestrated and run once on the device, you can use `execd` to run things again or to run a smaller subset of things on the remote device through `T-Shell`.
 
-By default, in the `Universal Test` world, everything will be deployed onto the remote machine at `C:\data\test\bin`. In T-Shell, use `cdd C:\data\test\bin` to change to that directory and then `execd te.exe Microsoft.Console.Host.FeatureTests.dll /name:*TestReadFileEcho*` to run just one specific test. Of course you should substitute the file name and test name parameters as makes sense. And of course you can find out more about `cdd` and `execd` on the `T-shell` page of `OSGWiki`.
+By default, in the `Universal Test` world, everything will be deployed onto the remote machine at `C:\data\test\bin`. In T-Shell, use `cdd C:\data\test\bin` to change to that directory and then `execd te.exe Microsoft.Console.Host.FeatureTests.dll /name:*TestReadFileEcho*` to run just one specific test. Of course, you should substitute the file name and test name parameters as makes sense. And of course you can find out more about `cdd` and `execd` on the `T-shell` page of `OSGWiki`.
 
 Fortunately, running things through `T-shell` in this fashion is exactly the same way that the testlab orchestrates the tests. If you still don't get good data this way, you can use the `Connect via Console` mechanism way above to try to run things under `WinDBG` or the `Visual Studio Remote Debugger` manually on the machine to get them to repro or under the debugger more completely.

doc/bot.md

@@ -34,7 +34,7 @@ We'll be using tags, primarily, to help us understand what needs attention, what
 ## Rules
 
 ### Triage Shorthand
-- All rules in this category apply to triaging issues. They're shorthand comments that the triage team can use in order to complete the triage process faster. 
+- All rules in this category apply to triaging issues. They're shorthand comments that the triage team can use in order to complete the triage process faster.
 - Only individuals with `Write` or `Admin` privileges on the repository can use these responses.
 
 #### Duplicate Issues
@@ -109,7 +109,7 @@ We'll be using tags, primarily, to help us understand what needs attention, what
   - Will use Squash merge strategy
   - Will attempt to delete branch after merge, if possible
   - Will automatically remove the `AutoMerge` label if changes are pushed by someone *without* Write Access.
-  - More information on bot-logic that can be controlled with comments is [here](https://github.com/OfficeDev/office-ui-fabric-react/wiki/Advanced-auto-merge)
+  - See more [information on bot-logic that can be controlled with comments](https://github.com/OfficeDev/office-ui-fabric-react/wiki/Advanced-auto-merge)
 
 #### Mark issues with an active PR
 - If there is an active PR for an issue, label that issue with the `In-PR` label
@@ -119,12 +119,3 @@ We'll be using tags, primarily, to help us understand what needs attention, what
 
 #### Remove Needs-Second from completed PRs
 - If a PR is closed and it has the `Needs-Second` tag, the bot will remove the tag.
-
-### Release Management
-
-When a release is created, if the PR ID number is linked inside the release description, the bot will walk through the related PR and all of its related issues and leave a message.
-- PR message: "🎉{release name} {release version} has been released which incorporates this pull request.🎉
-- Issue message: 🎉This issue was addressed in #{pull request ID}, which has now been successfully released as {release name} {release version}.🎉"
-
-## Admin Panel
-[Here](https://portal.fabricbot.ms/bot/?repo=microsoft/terminal)

doc/cascadia/Unittesting-CppWinRT-Xaml.md

@@ -380,7 +380,7 @@ Here's the AppxManifest we're using:
   </Properties>
 
   <Dependencies>
-    <TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.22621.0" />
+    <TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.26100.0" />
     <PackageDependency Name="Microsoft.VCLibs.140.00.Debug" MinVersion="14.0.27023.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
     <PackageDependency Name="Microsoft.VCLibs.140.00.Debug.UWPDesktop" MinVersion="14.0.27027.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
   </Dependencies>
@@ -517,7 +517,7 @@ This is because of a few key lines we already put in the appxmanifest:
 
 ```xml
   <Dependencies>
-    <TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.22621.0" />
+    <TargetDeviceFamily Name="Windows.Universal" MinVersion="10.0.18362.0" MaxVersionTested="10.0.26100.0" />
     <PackageDependency Name="Microsoft.VCLibs.140.00.Debug" MinVersion="14.0.27023.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
     <PackageDependency Name="Microsoft.VCLibs.140.00.Debug.UWPDesktop" MinVersion="14.0.27027.1" Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US" />
   </Dependencies>

doc/cascadia/profiles.schema.json

@@ -32,12 +32,21 @@
       ]
     },
     "DynamicProfileSource": {
-      "enum": [
-        "Windows.Terminal.Wsl",
-        "Windows.Terminal.Azure",
-        "Windows.Terminal.PowershellCore"
-      ],
-      "type": "string"
+      "type": "string",
+      "anyOf": [
+        {
+          "type": "string"
+        },
+        {
+          "enum": [
+            "Microsoft.WSL",
+            "Windows.Terminal.Wsl",
+            "Windows.Terminal.Azure",
+            "Windows.Terminal.PowershellCore",
+            "Windows.Terminal.VisualStudio"
+          ]
+        }
+      ]
     },
     "BellStyle": {
       "oneOf": [
@@ -423,6 +432,7 @@
         "newWindow",
         "nextTab",
         "openAbout",
+        "openCWD",
         "openNewTabDropdown",
         "openSettings",
         "openSystemMenu",
@@ -1917,7 +1927,7 @@
             },
             "useCommandline": {
               "default": false,
-              "description": "When set to `true`, the current commandline the user has typed will pre-populate the filter of the Suggestions UI. This requires that the user has enabled shell integration in their shell's config. When set to false, the filter will start empty."
+              "description": "When set to `true`, the current commandline the user has typed will prepopulate the filter of the Suggestions UI. This requires that the user has enabled shell integration in their shell's config. When set to false, the filter will start empty."
             }
           }
         }
@@ -2366,20 +2376,29 @@
           "description": "When set to true, the terminal will focus the pane on mouse hover.",
           "type": "boolean"
         },
+        "experimental.scrollToZoom": {
+          "default": true,
+          "description": "When set to true, holding the Ctrl key while scrolling will increase or decrease the terminal font size.",
+          "type": "boolean"
+        },
+        "experimental.scrollToChangeOpacity": {
+          "default": true,
+          "description": "When set to true, holding the Ctrl and Shift keys while scrolling will change the window opacity.",
+          "type": "boolean"
+        },
         "compatibility.allowHeadless": {
           "default": false,
           "description": "When set to true, Windows Terminal will run in the background. This allows globalSummon and quakeMode actions to work even when no windows are open.",
           "type": "boolean"
         },
-        "compatibility.isolatedMode": {
-          "default": false,
-          "description": "When set to true, Terminal windows will not be able to interact with each other (including global hotkeys, tab drag/drop, running commandlines in existing windows, etc.). This is a compatibility escape hatch for users who are running into certain windowing issues.",
-          "type": "boolean"
-        },
-        "compatibility.allowDECRQCRA": {
-          "default": false,
-          "description": "When set to true, the terminal will support the DECRQCRA (Request Checksum of Rectangular Area) escape sequence.",
-          "type": "boolean"
+        "compatibility.textMeasurement": {
+          "default": "graphemes",
+          "description": "This changes the way incoming text is grouped into cells. The \"graphemes\" option is the most modern and Unicode-correct way to do so, while \"wcswidth\" is a common approach on UNIX, and \"console\" replicates the way it used to work on Windows.",
+          "enum": [
+            "graphemes",
+            "wcswidth",
+            "console"
+          ]
         },
         "copyFormatting": {
           "default": true,
@@ -2479,11 +2498,6 @@
           "minimum": 1,
           "type": "integer"
         },
-        "startOnUserLogin": {
-          "default": false,
-          "description": "When set to true, this enables the launch of Terminal at startup. Setting this to false will disable the startup task entry. If the Terminal startup task entry is disabled either by org policy or by user action this setting will have no effect.",
-          "type": "boolean"
-        },
         "firstWindowPreference": {
           "default": "defaultProfile",
           "description": "Defines what behavior the terminal takes when it starts. \"defaultProfile\" will have the terminal launch with one tab of the default profile, and \"persistedWindowLayout\" will cause the terminal to save its layout on close and reload it on open.",
@@ -2531,6 +2545,11 @@
           "description": "When set to true, the Terminal's tab row will display a shield icon when the Terminal is running with administrator privileges",
           "type": "boolean"
         },
+        "showTabsFullscreen": {
+          "default": false,
+          "description": "When set to true, tabs remain visible in fullscreen mode. When set to false, tabs will be hidden when entering fullscreen mode.",
+          "type": "boolean"
+        },
         "useAcrylicInTabRow": {
           "default": false,
           "description": "When set to true, the tab row will have an acrylic material background with 50% opacity.",
@@ -2720,6 +2739,16 @@
           "description": "When set to true, when opening a new tab or pane it will get reloaded environment variables.",
           "type": "boolean"
         },
+        "compatibility.allowDECRQCRA": {
+          "default": false,
+          "description": "When set to true, the terminal will support the DECRQCRA (Request Checksum of Rectangular Area) escape sequence.",
+          "type": "boolean"
+        },
+        "compatibility.allowOSC52": {
+          "default": true,
+          "description": "When set to true, VT applications will be allowed to set the contents of the local clipboard using OSC 52 (Manipulate Selection Data).",
+          "type": "boolean"
+        },
         "unfocusedAppearance": {
           "$ref": "#/$defs/AppearanceConfig",
           "description": "Sets the appearance of the terminal when it is unfocused.",
@@ -2869,7 +2898,7 @@
           "description": "When true, this profile should always open in an elevated context. If the window isn't running as an Administrator, then a new elevated window will be created."
         },
         "environment": {
-          "description": "Key-value pairs representing environment variables to set. Environment variable names are not case sensitive. You can reference existing environment variable names by enclosing them in literal percent characters (e.g. %PATH%).",
+          "description": "Key-value pairs representing environment variables to set. Environment variable names are not case-sensitive. You can reference existing environment variable names by enclosing them in literal percent characters (e.g. %PATH%).",
           "type": "object",
           "additionalProperties": {
             "type": "string"
@@ -2901,7 +2930,7 @@
         },
         "experimental.rightClickContextMenu": {
           "default": false,
-          "description": "When set to true, right-clicking on the terminal will show a context menu. When set to false, right-click will copy",
+          "description": "When true, right-click shows a context menu; otherwise, it pastes from the clipboard or copies selection.",
           "type": "boolean"
         },
         "experimental.repositionCursorWithMouse": {
@@ -3103,12 +3132,13 @@
         },
         "pathTranslationStyle": {
           "default": "none",
-          "description": "Controls how file paths are transformed when they are dragged and dropped on the terminal. Possible values are \"none\", \"wsl\", \"cygwin\" and \"msys2\".",
+          "description": "Controls how file paths are transformed when they are dragged and dropped on the terminal. Possible values are \"none\", \"wsl\", \"cygwin\", \"msys2\" and \"mingw\".",
           "enum": [
             "none",
             "wsl",
             "cygwin",
-            "msys2"
+            "msys2",
+            "mingw"
           ],
           "type": "string"
         }

doc/creating_a_new_project.md

@@ -6,7 +6,7 @@ When creating a new DLL, it was really helpful to reference an existing DLL's `.
 
 - [ ] Make sure to `<Import>` our pre props at the _top_ of the vcxproj, and our post props at the _bottom_ of the vcxproj.
 ```
-<!-- pre props --> 
+<!-- pre props -->
 <Import Project="..\..\..\common.openconsole.props" Condition="'$(OpenConsoleDir)'==''" />
 <Import Project="$(OpenConsoleDir)src\cppwinrt.build.pre.props" />
 
@@ -35,7 +35,7 @@ DllGetActivationFactory = WINRT_GetActivationFactory    PRIVATE
 - _Note_: If your new library eventually rolls up as a reference to our Centennial Packaging project `CascadiaPackage`, you don't have to worry about manually adding your definitions to the `AppXManifest.xml` because the Centennial Packaging project automatically enumerates the reference tree of WinMDs and stitches that information into the `AppXManifest.xml`. However, if your new project does _not_ ultimately roll up to a packaging project that will automatically put the references into `AppXManifest`, you will have to add them in manually.
 
 ### Troubleshooting
-- If you hit an error that looks like this: 
+- If you hit an error that looks like this:
     ```
     X found processing metadata file ..\blah1\Microsoft.UI.Xaml.winmd, type already exists in file ..\blah\NewDLLProject\Microsoft.UI.Xaml.winmd.
     ```
@@ -51,4 +51,4 @@ DllGetActivationFactory = WINRT_GetActivationFactory    PRIVATE
 
 - If you hit a `Class not Registered` error, this might be because a class isn't getting registered in the app manifest. You can go check `src/cascadia/CascadiaPackage/bin/x64/Debug/AppX/AppXManifest.xml` to see if there exist entries to the classes of your newly created DLL. If the references aren't there, double check that you've added `<ProjectReference>` blocks to both `WindowsTerminal.vcxproj` and `TerminalApp.vcxproj`.
 
-- If you hit an extremely vague error along the lines of `Error in the DLL`, and right before that line you notice that your new DLL is loaded and unloaded right after each other, double check that your new DLL's definitions show up in the `AppXManifest.xml` file. If your new DLL is included as a reference to a project that rolls up to `CascadiaPackage`, double check that you've created a `.def` file for the project. Otherwise if your new project _does not_ roll up to a package that populates the `AppXManifest` references for you, you'll have to add those references yourself.
+- If you hit an extremely vague error along the lines of `Error in the DLL`, and right before that line you notice that your new DLL is loaded and unloaded right after each other, double check that your new DLL's definitions show up in the `AppXManifest.xml` file. If your new DLL is included as a reference to a project that rolls up to `CascadiaPackage`, double check that you've created a `.def` file for the project. Otherwise, if your new project _does not_ roll up to a package that populates the `AppXManifest` references for you, you'll have to add those references yourself.

doc/specs/#1043 - Set the initial position of the Terminal/spec.md

@@ -25,12 +25,12 @@ Two new properties should be added in the json settings file:
 
 1. All spaces will be ignored.
 
-2. Both X value and Y values are optional. If anyone of them is missing, or the value is invalid, system default value will be used. Examples:
+2. Both X value and Y values are optional. If any one of them is missing, or the value is invalid, system default value will be used. Examples:
 
-       ", 1000" equals to (default, 1000)
-       "1000, " equals to (1000, default)
-       "," equals to (default, default)
-       "abc, 1000" equals to (default, 1000)
+       ", 1000" equals (default, 1000)
+       "1000, " equals (1000, default)
+       "," equals (default, default)
+       "abc, 1000" equals (default, 1000)
 
 **launchMode**: string. Determine the launch mode. There are two modes for now
 
@@ -41,10 +41,10 @@ The steps of this process:
 
 1. Set the top-left origin, width and height to CW_USEDEFAULT.
 2. Get the dpi of the nearest monitor; Load settings.
-3. From settings, find the user-defined initial position and launch mode. 
+3. From settings, find the user-defined initial position and launch mode.
 4. If the user sets custom initial position, calculate the new position considering the current dpi and monitor. If not, use system default value.
 5. If the user set launch mode as "maximize", calculate the new height and width. If the user choose "default", use system default size.
-6. SetWindowPos with the new position and dimension of the window. 
+6. SetWindowPos with the new position and dimension of the window.
 
 Step 2 to 6 should be done in `AppHost::_HandleCreateWindow`, which is consistent to the current code.
 
@@ -52,11 +52,11 @@ In step 4, we may need to consider the dpi of the current monitor and multi-moni
 
 Edge cases:
 
-1. Multiple monitors. The user should be able to set the initial position to any monitors attached. For the monitors on the left side of the major monitor, the initial position values are negative. 
+1. Multiple monitors. The user should be able to set the initial position to any monitors attached. For the monitors on the left side of the major monitor, the initial position values are negative.
 2. If the initial position is larger than the screen resolution and the window top left corner is off-screen, we should let user be able to see and drag the window back on screen. One solution is to set the initial position to the top left corner of the nearest monitor if the top left is off-screen.
 3. If the user wants to launch maximized and provides an initial position, we should launch the maximized window on the top left corner of the monitor where the position is located.
-4. Launch the Terminal on a monitor with custom dpi. Changing the dpi of the monitor will not affect the initial position of the top left corner. So we do not need to handle this case. 
-5. Launch the Terminal on a monitor with custom resolution. Changing the resolution will change the available point for the initial position. (2) already covers this case. 
+4. Launch the Terminal on a monitor with custom dpi. Changing the dpi of the monitor will not affect the initial position of the top left corner. So we do not need to handle this case.
+5. Launch the Terminal on a monitor with custom resolution. Changing the resolution will change the available point for the initial position. (2) already covers this case.
 
 ## UI/UX Design
 
@@ -69,14 +69,14 @@ The rest of the UI will be the same of the current Terminal experience, except t
 
 ### Accessibility
 
-Users can only set the initial position and launch mode in the Json file with keyboard. Thus, this will not affect accessibility. 
+Users can only set the initial position and launch mode in the Json file with keyboard. Thus, this will not affect accessibility.
 
 ### Reliability
-We need to make sure that whatever the initial position is set, the user can access the Terminal window. This is guaranteed because if the top left corner position of the Terminal Window is out of screen, we put it on the top left corner of the screen. 
+We need to make sure that whatever the initial position is set, the user can access the Terminal window. This is guaranteed because if the top left corner position of the Terminal Window is out of screen, we put it on the top left corner of the screen.
 
 ### Performance, Power, and Efficiency
 
-More data reading and calculation will be included in Terminal Launch process, which may inversely influence the launch time. However, the impact is trivial. 
+More data reading and calculation will be included in Terminal Launch process, which may inversely influence the launch time. However, the impact is trivial.
 
 ## Potential Issues
 
@@ -88,9 +88,9 @@ For now, this feature only allows the user to set initial position and choose wh
 
 1. Save the position of the Terminal on exit, and restore the position on the next launch. This could be a true/false feature that users could choose to set.
 
-2. We may need to consider multiple Terminal windows scenario. If the user opens multiple Terminal windows, then we need to consider how to save and restore the position. 
+2. We may need to consider multiple Terminal windows scenario. If the user opens multiple Terminal windows, then we need to consider how to save and restore the position.
 
-3. We may also consider more launch modes. Like full screen mode and minimized mode. 
+3. We may also consider more launch modes. Like full screen mode and minimized mode.
 
 GitHub issue for future follow-ups: https://github.com/microsoft/terminal/issues/766
 

doc/specs/#1564 - Settings UI/cascading-settings.md

@@ -9,7 +9,7 @@ issue id: 1564
 
 ## Abstract
 
-Windows Terminal's settings model adheres to a cascading settings architecture. This allows a settings object to be defined incrementally across multiple layers of declarations. The value for any global setting like `copyOnSelect`, for example, is set to your settings.json value if one is defined, otherwise defaults.json, and otherwise a system set value. Profiles in particular are more complicated in that they must also take into account the values in `profiles.defaults` and dynamic profile generators.
+Windows Terminal's settings model adheres to a cascading settings architecture. This allows a settings object to be defined incrementally across multiple layers of declarations. The value for any global setting like `copyOnSelect`, for example, is set to your settings.json value if one is defined; otherwise, defaults.json, and otherwise a system set value. Profiles in particular are more complicated in that they must also take into account the values in `profiles.defaults` and dynamic profile generators.
 
 This spec explores how to represent this feature in the Settings UI.
 

doc/specs/#1595 - Suggestions UI/Snippets.md

@@ -447,7 +447,7 @@ Another reason we shouldn't support keys being able to be lazy-bound to local
 snippets: It's entirely too easy for `malicious.exe` to create a file in
 `%HomePath%` that creates a snippet for `\u003pwn-your-machine.exe\r` (or
 similar). Any app can read your settings file, and it is again too easy for that
-malicious app to set it's own action `id` to the same as some other well-meaning
+malicious app to set its own action `id` to the same as some other well-meaning
 local snippet's ID which you DO have bound to a key.
 
 When we first load the snippets from the `.wt.json` file, we'll want to also ask
@@ -529,7 +529,7 @@ their own workflows.
   * `--local`: Save to the `.wt.json` in the CWD, if there is one (or create
     one)
   * `--parent`: Save to the `.wt.json` in the first ancestor of the CWD, if
-    there is one. Otherwise create one here.
+    there is one. Otherwise, create one here.
   * `--settings`: Manually save to the settings file?
   * `--profile`: save to this profile???? Not sure if this is actually possible.
     Maybe with the `WT_SESSION_ID` env var to figure out which profile is in use
@@ -563,9 +563,9 @@ their own workflows.
   * We'd have inputs for the commandline, name, description.
   * Obviously, it'd be easy to have a "Add new" button (to open that dialog) on
     the snippets pane.
-  * We could have `wt save` open that dialog pre-populated, rather than just
+  * We could have `wt save` open that dialog prepopulated, rather than just
     saving the command directly.
-  * We could even also find a way to pre-populate that dialog with the recent
+  * We could even also find a way to prepopulate that dialog with the recent
     commands (from shell integration)!
 * As a potential v2.0 of the snippets file schema, we may look to the
   `.vscode/tasks.json` schema for inspiration. That file supports much more

doc/specs/#1595 - Suggestions UI/Suggestions-UI.md

@@ -240,7 +240,7 @@ Not listed above is [shell-driven autocompletion]. These aren't something that
 the Terminal can invoke all on its own - these are something the shell would
 need to invoke themselves.
 
-#### Pre-populate the current commandline context
+#### Prepopulate the current commandline context
 
 Consider the following scenario. A user has typed `git c` in their shell, and
 has [shell integration] enabled for their shell. They want to open the
@@ -248,7 +248,7 @@ Suggestions UI filtered to their recent history, but starting with what they've
 already typed. To support this scenario, we'll add an additional property:
 
 * `"useCommandline"`: `bool` (**default**: `true`)
-  * `true`: the current commandline the user has typed will pre-populate the
+  * `true`: the current commandline the user has typed will prepopulate the
     filter of the Suggestions UI. This requires that the user has enabled shell
     integration in their shell's config.
   * `false`: the filter will start empty, regardless of what the user has typed.
@@ -388,7 +388,7 @@ spec's review.
 * [ ] Enable the `SuggestionsControl` to open with or without a search box
 * [ ] Plumb support for shell-driven completions through the core up to the app
 * [ ] Expose the _current_ commandline from the `TermControl`
-* [ ] Add a `useCommandline` property to `suggestions`, to pre-populate the search with the current commandline.
+* [ ] Add a `useCommandline` property to `suggestions`, to prepopulate the search with the current commandline.
 * [ ] Persist recent commands / directories accordingly
 
 ### 🏃‍♂️ Run
@@ -436,7 +436,7 @@ Here's a sample json schema for the settings discussed here.
         },
         "useCommandline": {
           "default": false,
-          "description": "When set to `true`, the current commandline the user has typed will pre-populate the filter of the Suggestions UI. This requires that the user has enabled shell integration in their shell's config. When set to false, the filter will start empty."
+          "description": "When set to `true`, the current commandline the user has typed will prepopulate the filter of the Suggestions UI. This requires that the user has enabled shell integration in their shell's config. When set to false, the filter will start empty."
         },
         "nesting": {
           "default": true,
@@ -591,7 +591,7 @@ We'll probably want a way for recent commands to be saved across sessions. That
   * If they're saved per-profile, maybe a profile can opt-in to loading all the commands?
   * How does defterm play with this? Do we "layer" by concatenating per-profile commands with `profiles.defaults` ones?
 * A button in the Settings UI for clearing these commands
-* Should fragments be able to pre-populate "recent commands"?
+* Should fragments be able to prepopulate "recent commands"?
   * I'm just gonna say _no_. That would be a better idea for Tasks (aka just a `sendInput` Action that we load from the fragment normally as a Task), or a specific suggestion source for the fragment extension.
 
 #### Inline mode

doc/specs/#1790 - Font features and axes-spec.md

@@ -23,7 +23,7 @@ In a similar vein, many fonts allow for setting variations on the font along cer
 
 ### Font features
 
-It is already possible to pass in a list of [font feature structs](https://docs.microsoft.com/en-us/windows/win32/api/dwrite/ns-dwrite-dwrite_font_feature) to DWrite for it to handle. A font feature struct contains only 2 things: 
+It is already possible to pass in a list of [font feature structs](https://docs.microsoft.com/en-us/windows/win32/api/dwrite/ns-dwrite-dwrite_font_feature) to DWrite for it to handle. A font feature struct contains only 2 things:
 
 1. A font feature tag
 2. A parameter value
@@ -78,7 +78,7 @@ Aside from additional parsing required for the settings file (which inherently o
 
 ### Compatibility
 
-Older versions of Windows may not have the DWrite updates that allow for defining font features and axes of variation. We must make sure to fallback to the current implementation in these cases.
+Older versions of Windows may not have the DWrite updates that allow for defining font features and axes of variation. We must make sure to fall back to the current implementation in these cases.
 
 ### Performance, Power, and Efficiency
 
@@ -102,4 +102,4 @@ We will also need to consider how we want to represent this in the settings UI.
 
 [DWRITE_FONT_FEATURE structure](https://docs.microsoft.com/en-us/windows/win32/api/dwrite/ns-dwrite-dwrite_font_feature)
 
-[DWRITE_FONT_AXIS_VALUE structure](https://docs.microsoft.com/en-us/windows/win32/api/dwrite_3/ns-dwrite_3-dwrite_font_axis_value)
+[DWRITE_FONT_AXIS_VALUE structure](https://docs.microsoft.com/en-us/windows/win32/api/dwrite_3/ns-dwrite_3-dwrite_font_axis_value)

doc/specs/#2046 - Command Palette.md

@@ -698,7 +698,7 @@ This would define three commands, each with a number of nested commands undernea
 * The second command:
   - It uses the string literal `"Connect to ssh..."` as it's name
   - It contains two nested commands:
-    - Each nested command has it's own literal name
+    - Each nested command has its own literal name
     - Activating these commands would cause us to open a new tab with the
       provided `commandline` instead of the default profile's `commandline`
 * The third command:

doc/specs/#2046 - Unified keybindings and commands, and synthesized action names.md

@@ -10,7 +10,7 @@ issue id: 2046
 ## Abstract
 
 This document is intended to serve as an addition to the [Command Palette Spec].
-While that spec is complete in it's own right, subsequent discussion revealed
+While that spec is complete in its own right, subsequent discussion revealed
 additional ways to improve the functionality and usability of the command
 palette. This document builds largely on the topics already introduced in the
 original spec, so readers should first familiarize themselves with that

doc/specs/#2871 - Pane Navigation/#2871 - Pane Navigation.md

@@ -253,7 +253,7 @@ After much discussion as a team, we decided that **Proposal D** would be the
 best option. We felt that there wasn't a need to add any extra configuration to
 invoke the "pane switcher" as anything different than the "tab switcher". The
 "pane switcher" should really just exist as a part of the functionality of the
-advanced tab switcher, not as it's own thing.
+advanced tab switcher, not as its own thing.
 
 Additionally, we concurred that the new "direction" value should be `prev`, not
 `last`, for consistency's sake.