We have to do this so that the store sees us as one thing ("Windows
Terminal") and the Start menu sees us as another ("Terminal").
The store will reject our package if the value we use for "DisplayName"
here doesn't match the store's "reserved names".
This value is *not used* by the start menu.
(cherry picked from commit e064c15675)
## Summary of the Pull Request
When using a screen reader, the buttons on the "add a new profile" page were being read weirdly:
- "New empty profile" button read as "create new button button"
- "duplicate" button read as "duplicate button button"
It's generally standard to read out the text inside the button, so I did just that by reusing the existing localized resources. This also removes the redundant "button" that is said by the screen reader.
I also removed the unused `AutomationId` and unnecessary `Button.Content` tags.
#11156 can be closed upon validation by the accessibility team.
## Validation Steps Performed
✅ navigate to both buttons using Narrator; make sure it sounds right
(cherry picked from commit 24c5f7bba4)
Since we turned this feature on in windows, and it relies on _lying
about the contents of the registry_, Terminal needs to be in on the
joke.
This will need to be reverted and serviced if we choose not to ship like
this.
Fixes#12308
(cherry picked from commit 457738e388)
I added a condition to exclude some of the NuGet PGO stuff when there was no build mode, but appear to not have propagated any of it in the PGD merge job. This sets it to Optimize here so it'll go through.
## PR Checklist
* [x] Closes#12300
* [x] I work here.
* [x] It blends.
## Validation Steps Performed
* [x] Ran the PGO Instrument Phase
* [x] Ran the PGO Optimize Phase
(cherry picked from commit 469202f462)
Basically, this is the same as #12266, but for the `SearchBoxControl`. Trickily, the ControlCore is the one that knows if there were search results, but the TermControl has to be the one to announce it.
* [x] Will take care of #11973 once a11y team confirms
* [x] Tested manually with Narrator
* [x] Resolves a part of #6319, which I'm repurposing just to displaying the number of results in general.
* See also #3920
(cherry picked from commit fbe0416305)
This adds names to more of our focusable elements. This should be the rest of them that I missed in #11364
* #9990: a11y megathread
* #11155: original version of this
* [x] Should take care of #11996 once confirmed
* [x] I work here
Used Accessibility Insights to verify.
There is one other weird bit. All the expanders that have content below the expander (not inline), show up as focusable, but don't have names. Even when I add names to them. I believe this is due to https://github.com/microsoft/microsoft-ui-xaml/issues/5820, which is fixed in https://github.com/microsoft/microsoft-ui-xaml/pull/6032, in https://github.com/microsoft/microsoft-ui-xaml/releases/tag/v2.8.0-prerelease.220118001. Unfortunately, we're on a 2.7 prerelease, so we don't have that fix yet. I may see how painful moving to that is, because we're gonna get another a11y ping as soon as 1.13 ships.
I pre-emptively added names to these guys in f7ba158dc, so that the new MUX should just fix this without any thinking on our part.
(cherry picked from commit cf4d47c54d)
I didn't have the tray icon enabled before I suppose, so this never got hit? Anyhow, we need to change where we look for the AppName. Otherwise we crash on launch 😨
* [x] fixes `main`
* [x] I work here
* regressed in #12264
* [x] Tested by: actually running the Terminal with this, it launched
(cherry picked from commit 7150fd8f97)
## Summary of the Pull Request
According to https://github.com/microsoft/microsoft-ui-xaml/issues/1971, `PaneFooter` does not set the `SizeOfSet` or `PositionInSet` properties. However, `FooterMenuItems` does and works for our scenario. So we just replaced `PaneFooter` with `FooterMenuItems`.
Will handle #11154 upon verification from the accessibility team.
## Validation Steps Performed
✅ Verified using Accessibility Insights
✅ "Open Json File" button can still be invoked and keyboard navigated to as expected
(cherry picked from commit 2861b41fd0)
This should be most of the surfaces that we really care about for displaying "Windows Terminal". There's a pile of other references in code, but I couldn't find any other resources that mention it.
I left a lot of the references to Windows Terminal throughout. Seemed like it was fine to keep calling it that in most places, just these localized strings that are going to be displayed in the Shell that should be changed.
Rough compare:
The strings were also moved to the Context Menu resources file, because that's localized into more languages.
@DHowett we may want to spin a full build to make sure this works and I didn't miss anything
* [x] Closes#12091
(cherry picked from commit a66a1c0cf5)
## Summary of the Pull Request
Expands on #9582. If the command palette finds results, the screen reader says "Suggestions available".
Makes the scenario mentioned in #7907 work.
This is sufficient for various reasons:
1. According to the bug report, saying that suggestions are available is sufficient
> Screen reader should provide the results info on searching commands like 10 results found or suggestions available when there are any search results (Source: #7907)
2. This is common practice. Settings app and XAML Controls Gallery do this for their search box.
Also, the user should be able to know how many results were found by tabbing/selecting a result item. When this is done, the screen reader will use `SizeOfSet` and `PositionInSet` to announce how many results were found and which one we're currently on.
## Validation Steps Performed
Verified this behavior using Narrator.
Verified it matches the behavior of the Settings app and the XAML Controls Gallery.
(cherry picked from commit 1e47d7aca7)
This makes the scenario mentioned in #8480 work. It's maybe not as holistic a solution as we'd like, but it definitely works.
Tested both with Narrator, and using the TabView scroll handles to get tab focus into the tab row manually
* [x] Closing the _active_ tab with <kbd>Ctrl+Shift+w</kbd> works (not the `TabViewItem` that has focus, but that's how Edgium works so that seems fine)
* [x] Opening a tab with <kbd>Ctrl+Shift+t</kbd> works
* [x] Opening the cmdpal with <kbd>Ctrl+Shift+p</kbd> works
* [x] Will take care of #8480 once we get the a11y team to validate
* [x] I work here
#### Notes:
None of
```xaml
PreviewKeyDown="_KeyDownHandler"
KeyDown="_KeyDownHandler"
KeyUp="_KeyDownHandler"
```
On the TerminalPage directly seem to fire when the focus is in the `TabViewItem` or the New Tab flyout. But they fire just fine when focus is in the `TermControl`. Interesting, because you'd think that the `TermControl` would have already handled the key...
(cherry picked from commit 6f69487829)
## Summary of the Pull Request
Makes `Model::DefaultTerminal` an `IStringable`, which presents it as a string, when possible. This enables text search for defterm's setting. This also enables screen readers to identify the combo box items by their text content (app name, author, and version) as opposed to being treated as an item containing more text. As a part of that, I cleaned up the UIA tree to treat the item's name as "\<name\>, \<author\>, \<version\>". This is consistent with how the Settings App presents installed apps in Apps > Installed apps.
#11251 will be resolved upon verification by the accessibility team.
## Validation Steps Performed
Verified using Narrator and Accessibility Insights.
(cherry picked from commit d89c241dac)
The PGO helpers NuGet had the Y2K22 bug. This receives and integrates the updated package in our project to restore NuGet functionality.
## PR Checklist
* [x] Closes#12261
* [x] I work here
* [x] If it builds it sits.
## Validation Steps Performed
* [x] Build new PGO instrument data with this pipeline update: https://dev.azure.com/microsoft/Dart/_build/results?buildId=44304850&view=results
(cherry picked from commit fe52368f9b)
I can find the commit where this regressed tomorrow if needed. In #10685 we stopped emitting these notifications while we were deferring cursor drawing. We however forgot to send the notification at the end of the defer.
This likely has a small perf impact. We however do need these cursor position events for IMEs to be able to track the cursor position (and low key for #10821)
* [x] regressed in #10685
* [x] Closes#11170
* [x] I work here
* [x] Tests added
(cherry picked from commit 01fd7141ed)
When title updates are forwarded from the host to the client terminal,
they're passed over conpty in an `OSC 0` sequence. If there are any
control characters embedded in that title text it's essential they be
filtered out, otherwise they are likely to be misinterpreted by the VT
parser on the other side. This PR fixes a case where that sanitization
step was missed for titles initialized at startup.
Originally the sanitization step was handled in `DoSrvSetConsoleTitleW`,
which catches title changes made via VT escape sequences, or through the
console API, but missed the title initialization at startup. I've now
moved that sanitization code into the `CONSOLE_INFORMATION::SetTitle`
method, which should cover all cases.
This sanitization is only meant to occur when in "pty mode", though,
which we were originally establishing with an `IsInVtIoMode` call.
However, `IsInVtIoMode` does not return the correct result when the
title is set at startup, since the VT I/O thread is not initialized at
that point. So I've instead had to change that to an `InConptyMode`
call, which determines the conpty state from the launch args.
## Validation Steps Performed
I've manually confirmed the test case described in issue #12206 is now
working correctly.
However, the change to using `InConptyMode` caused some of the unit
tests to fail, because there isn't a real conpty connection when
testing. Fortunately there are some `EnableConptyModeForTests` methods
used by the unit tests to fake the appearance of a conpty connection,
and I just needed to add some additional state in one of those methods
to trigger the correct `InConptyMode` response.
Closes#12206
(cherry picked from commit 3804f2672e)
This commit also introduces a check that we are in an interactive
session before we perform handoff, so as to not break service accounts.
It also adds some tracing.
Merged PR 6882227: [Git2Git] Merged PR 6881763: Change to hardcoded system GUIDs to appease manifest validation
Manifest validation won't accept migration/initialization of HKCU-based registry keys anymore. The enforcement scripts says that they should be defined in code instead. So here it is: defined in code insteead.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 67c720b628de4acefbc381891b7e7d29d387038e
Related work items: MSFT-37867666
In previous releases, we had the commandlines for the Command Prompt and PowerShell profiles unqualified, as `cmd.exe` and `powershell.exe`. This was bad - theoretically, that would have preferred the cmd that was in the CWD over the one in System32. Or, something could insert itself into the path, and you'd end up with a malicious `cmd.exe` before the real one.
In #11437, we made sure that the `userDefaults` are initiated with the fully qualified paths. However, that didn't fix the issue for folks who already had settings files.
In an effort to better prevent this kind of badness, if we see a profile _with a default profile guid_, AND the unqualified version of the path, then we'll stealth replace it with the fully qualified one.
* Related to #11437
* [x] fixes#12126
* [x] Tests added
(cherry picked from commit f1baa319fc)
This was a simple oversight. No user profile ever has `connectionType` set, because why would they. So even for the Azure Shell, which needed this, the check would fail and we'd forget to duplicate the connectionType to the new profile.
* [x] I work here
* [x] Closes#12120
* [x] Tested manually
(cherry picked from commit eb83469874)
This PR does two things, which are best viewed as atomic commits:
* e64ae7d: Move the `MangleStartingDirectoryForWSL` to `types/utils`. It doesn't _really_ make sense in `types`, since it's only really being used in a single place in TerminalConnection. However, TerminalConnection doesn't have tests, and types does. So this commit move the function there, and adds tests from #9223 to the types tests.
* 42036c5: This actually fixes the bug in #11994. Unfortunately, `wsl --cd` will try to treat paths starting with `//wsl$` as a linux-relative path, when the user almost certainly wanted a windows-relative one. So we'll mangle that back into a path that looks like `\\wsl$\foo\bar`.
* [x] closes#11994
* [x] I work here
* [x] tests added 🎉
(cherry picked from commit b87b809fa0)
I'm not 100% sure that this is the right solution, but it does seem to work well enough. This is unfortunately a classic heisenbug. It was already hard enough to repro originally, but attaching a debugger made it totally impossible to hit.
My theory is that it's possible for the GotFocus event to fire before the LayoutUpdated event does. If that were to occur, then we'd try to turn on the cursor timer before it exists, gracefully do nothing, then create the timer. In that case, we'd never get a subsequent message to start the blinking.
I tested that theory by just initializing the cursor blinker to our `_focused` state. In that case, if the control has already been focused at the time of the LayoutUpdated event, then we can init the cursor to the correct state. Testing that out, I couldn't once get this to repro, which makes me think this works. I've opened some 900 (<sup>hyperbole</sup>) tabs now, so I'm pretty confident I'd have seen it by now.
* Regressed in #10978
* [x] fixes#11411
* [x] I made sure I didn't regress #6586
* [x] I work here
(cherry picked from commit 55aea08d15)
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- Settings > Add a new profile
- Disable "Duplicate" button until a profile is selected
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Should take care of #12056, once we can get a build to the a11y team (MAINTAINER EDIT: we unfortunately can't just say "closes #foo" for issues like this one, we need another team to validate the following build.)
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
(cherry picked from commit a766798fb8)
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
fix#11432
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11432
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
compiled and verified that "\~" , "/usr/bin" , "~/.config" and "/" as stating directory didn't get relative path resolve
verified that '.' did
(cherry picked from commit c98ec15144)
Ensures the PowerShell Core profile's commandline is quoted. This allows
the profile to work correctly if there are files in place on the machine
(e.g. one called `C:\Program`) that prevent `CreateProcess()` from
invoking the un-quoted commandline.
## Validation Steps Performed
Created a file called `C:\Program` and opened the PowerShell profile in
terminal.
Closes#11717
(cherry picked from commit 4930508b8c)
When copying content from the terminal to the clipboard (with
formatting), a default background color needs to be set to fill the
unused area of the pasted block. Prior to this PR, that color was not
correctly set, so the pasted content did not match what was seen on
screen.
Windows Terminal previously used the default background from the initial
color scheme, so it didn't take palette changes into account.
OpenConsole did use the active default color, but didn't take the
reverse screen mode into account, so could end up using the foreground
rather than the background color.
In both case I've changed the code to lookup the runtime colors in the
same way that renderer does, so they should now match what is seen on
screen.
I've manually confirmed that the background color is now correctly set
when copying from both Windows Terminal and OpenConsole.
Closes#11988
(cherry picked from commit b61b24ecd1)
Enables a series of tasks run against our release pipeline that validate the security and compliance status of our code in an automated fashion. These checks include:
- Component Governance - (we had this one, it was moved to here) - Inventories open-source components used in our build
- PREfast - C/C++ static analysis for common code errors and exploits
- Policheck - Searches source code, comments, and text for words that could be sensitive legally, culturally, or geopolitically
- Credscan - Looks for credentials left behind in the code/documents and build output files
- BinSkim - Searches for common vulnerabilities in binaries
- CheckCFlags - Validates that compile/link flags match the policies recommended by Windows engineering for inclusion into the OS product image
- CFGCheck/XFGCheck - Validates that the CFG and/or XFG settings were enabled at compile and link time to guard against control flow attacks.
We're also required to run the SBOM one, but that was done in a separate PR and we're still pending the detectors being updated.
- #11948 - Move from CFG to XFG once XFG task folks get back to me on it
- #11949 - Enable bug filing for SecComp tasks
- #11950 - Bulk process bugs filed by SecComp tasks
- #11947 - Validate SBOM when checkers come online
- [x] - Fixes#10735
- [x] - Fixes#908
- [x] - I work here
- [x] - If it fits, it sits.
Only look for PGO package if build mode targeted; add packages.config dependency to ease restoration
## PR Checklist
* [x] Closes#11978
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Test of restore and build on fresh repo copy passed.
To unify with WinUI, we're going to share an engineering component of this particular NuGet package full of scripts and utilities to make PGOing things easier.
This basically removes all of the scripts that I ~blatantly stole~ copied from https://github.com/microsoft/microsoft-ui-xaml and moves to the NuGet package that the team generates instead. A bunch of build things had to be massaged to make it work in our pipeline.
Microsoft will be providing a Software Bill of Materials for our products. This onboards the Windows Terminal product to the common engineering system task that can scavenge for this information within our build project (already recorded for internal compliance reasons) and present it in a machine-readable interchange format.
See also: https://devblogs.microsoft.com/engineering-at-microsoft/generating-software-bills-of-materials-sboms-with-spdx-at-microsoft/
This does not yet include packaging and distributing the SBOM with our final packages. We are waiting for that tooling to come online for MSIX. Guidance is "Coming Soon™️."
## References
- https://github.com/microsoft/dropvalidator/issues/216 - `cgmanifest.json` are not being pulled in yet, but I've been told internally this will fix it. I will double-check when I hear back on this issue.
## PR Checklist
* [x] Closes#11810
* [x] I work here
* [x] I ran it and I see the manifest generated.
Revert "Fix environment block creation (#7401)"
This reverts commit 7886f16714.
(cherry picked from commit e46ba65665)
Revert "Always create a new environment block before we spawn a process (#7243)"
This reverts commit 849243af99.
References #7418
(cherry picked from commit 4204d2535c)
(cherry picked from commit f8e8572c23)
(cherry picked from commit cb4c4f7b73)
(cherry picked from commit afb0cac3e3)
(cherry picked from commit b25dc74a1d)
Just read the code, it's immediately obvious what I messed up
Closes#11645
@DHowett turns out I was wrong, I could get this one done before 5 😜
(cherry picked from commit 3667678df1)
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Properly handle UTF-16 surrogates when calculating the position of matched pattern.
Fix#8709
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
b88ffb21b0/src/buffer/out/search.cpp (L335-L339)
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#8709
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
use `Utf16Parser::Parse` to handle code points from U+010000 to U+10FFFF in UTF-16.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
also the case by @mas90 https://github.com/microsoft/terminal/issues/8709#issuecomment-884915485:
(cherry picked from commit a2d96d6b1f)
This is a primitive bug fix for GetConsoleCommandHistoryLengthA.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
(cherry picked from commit ca20bbde1e)
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Clean up an invalid access that I introduced in #11440
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11684
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
(cherry picked from commit 29e6235151)
We have been advised to give not only the PDB paths, but paths to the EXE and DLL files we produce, to the PublishSymbols build task. We are assured by our engineering systems teams that enlightening the task to all of this information helps it hook things up better somewhere between our build machine and the symbol server such that debugging is more robust, especially around thrown exception stacks.
## PR Checklist
* [x] Closes#11737 - main fix for feeding EXEs and DLLs into the symbol publisher
* [x] Closes#11860 - bonus fix because I noticed the PDB source linking wasn't working
* [x] I work here.
* [x] If it fits, it sits.
(cherry picked from commit 52235b0fb6)
Adds snap layout support to the Terminal's maximize button. This PR is
full of BODGY, so brace yourselves.
Big thanks to Chris Swan in #11134 for building the prototype.
I don't believe this solves #8795, because XAML islands can't get
nchittest messages
- The window procedure for the drag bar forwards clicks on its client
area to its parent as non-client clicks.
- BODGY: It also _manually_ handles the caption buttons. They exist in
the titlebar, and work reasonably well with just XAML, if the drag bar
isn't covering them.
- However, to get snap layout support, we need to actually return
`HTMAXBUTTON` where the maximize button is. If the drag bar doesn't
cover the caption buttons, then the core input site (which takes up
the entirety of the XAML island) will steal the `WM_NCHITTEST` before
we get a chance to handle it.
- So, the drag bar covers the caption buttons, and manually handles
hovering and pressing them when needed. This gives the impression that
they're getting input as they normally would, even if they're not
_really_ getting input via XAML.
- We also need to manually display the button tooltips now, because XAML
doesn't know when they've been hovered for long enough. Hence, the
`_displayToolTip` `ThrottledFuncTrailing`
## Validation
Minimized, maximized, restored down, hovered the buttons slowly, moved
the mouse over them quickly, they feel the same as before. But now with
snap layouts appearing.
## TODO!
* [x] I'm working on getting the ToolTips on the caption buttons back. Alas, I needed a demo of this _today_, so I'll fix that tomorrow morning.
* [x] mild concern: I should probably test Win 10 to make sure there wasn't weird changes to the message loop in win11 that means this is broken on win10.
* [x] I think I used the wrong issue number for tons of my comments throughout this PR. Double check that. Should be #9443, not #9447.
Closes#9443
I thought this took care of #8587 ~as a bonus, because I was here, and the fix is _now_ trivial~, but looking at the latest commit that regressed.
Co-authored-by: Chris Swan <chswan@microsoft.com>
(cherry picked from commit f2ebb21bd1)
Fixes MSFT:34673647, at least I'm pretty sure. That's only ever hit a few
times externally, and internally it's hitting a lot on 1.9.1942 builds, which
doesn't really make any sense.
(cherry picked from commit a74c37bbcd)
Window sends an event that requests exit from fullscreen then SC_RESTORE messages is sent and it is in fullscreen mode.
Closes#10607
## Validation Steps Performed
Border and tabbar now appear after exiting fullscreen via "win+arrow down".
(cherry picked from commit 7aae2e9100)
## Summary of the Pull Request
There is a non-zero subset of applications that randomly output _Locking Shift_ escape sequences which will invoke a character set from G2 or G3 into the left half of the code table. If those G-sets are mapped to Latin1, that can result in the terminal producing output that appears to be broken. This PR now defaults all G-sets to ASCII, to prevent an unintentional _Locking Shift_ from having any effect.
## PR Checklist
* [x] Closes#10408
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #10408
## Detailed Description of the Pull Request / Additional comments
Most other modern terminals also default to ASCII in all G-sets, so this shouldn't break any modern applications. Legacy 8-bit applications may still expect the G2 and G3 sets mapped to Latin1, but they would also need to have the ISO-2022 encoding enabled, so we can keep them happy by setting G2 and G3 correctly when the ISO-2022 encoding is requested.
## Validation Steps Performed
I've manually confirmed that `echo -e "\en"` and `echo -e "\eo"` no longer have any visible effect on the output (at least without first invoking another character set into G2 or G3). I've also confirmed that they do still work as expected (i.e. selecting Latin1) after enabling the ISO-2022 encoding.
(cherry picked from commit 27e042b784)
## Summary of the Pull Request
When we are on a settings UI tab, `_GetActiveControl` returns a `nullptr`, make sure not to try and focus it in that case
## PR Checklist
* [x] Closes#11633
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
No longer crashes
(cherry picked from commit a7ce93a357)
This is a pretty obvious typo in retrospect. Never hit it before, because in all non-defterm windows, the `_startupActions` always has one action.
* [x] Closes#11463
(cherry picked from commit b90f3605a2)
## Summary of the Pull Request
Ensures that the background image path is displayed in the settings UI.
## References
One of the items on #11353
## PR Checklist
* [x] Closes#11541
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Set the background image path and saw that it was displayed in the settings UI.
(cherry picked from commit 9662bc6910)
This commit is a minimal fix in order to pass the
`IDWriteFontCollection` we create out of .ttf files residing next to our
binaries to the `IDWriteFontFallback::MapCharacters` call. The
`IDWriteTextFormat` is used in order to carry the font collection over
into `CustomTextLayout`.
## Validation
* Put `JetBrainsMono-Regular.ttf` into the binary output directory
* Modify `HKCU:\Console\*\FaceName` to `JetBrains Mono`
* Launch OpenConsole.exe
* OpenConsole uses JetBrains Mono ✔️Closes#11032Closes#11648
(cherry picked from commit 131f5d2b32)
I can't even write a description for this. Just read the code change, you'll see what I goofed.
Regressed in #11372Closes#11555
(cherry picked from commit 1cedac6a33)
The "updates" key is an alternative "guid" key for fragment profiles.
But SettingsLoader::_appendProfile stores and deduplicates profiles according
to their "guid" only. We need to modify the function to optionally store
profiles by their "updates" key as well, otherwise multiple fragment
profiles without "guid" might collide as they produce the same default GUID.
## PR Checklist
* [x] Closes#11597
* [x] I work here
* [ ] Tests added/passed
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Unit tests pass ✔️
* Issue #11597 doesn't reproduce anymore ✔️
(cherry picked from commit fe26a6efc0)
Fixes#11606
This is weird, but the infobars would appear totally on top of the
TerminalPage when `showTabsInTitlebar:false`. This would result in the infobar
obscuring the tabs.
Now, the infobars are strictly inserted after the tabs, before the content. So
when they appear, they will reduce the amount of space usable for the control.
That is a little annoying, but preferable to the tabs totally not existing.
Relevant conversation notes from #10798:
> > If the info bar is not local to the tab, then its location between the tab
> > bar (when the title bar is hidden) and the terminal panes feels
> > misleading. Should it instead be above the tab bar or below the terminal
> > panes?
>
> You're... not wrong here. It's maybe not the best place for it, but _on top_
> of the tabs would look insane, and probably wouldn't even work easily, given
> the way we reparent the tab row into the titlebar.
>
> In the pane itself would make more sense, but that runs abreast of all sorts
> of things like #9024, #4998, which might make more sense.
I'm just gonna go with this now, because it's _better_ than before, while we
work out what's _best_.
(cherry picked from commit a916a5d9de)
After this commit OpenConsoleProxy will be built without a CRT.
This cuts down its binary size and DLL dependency bloat.
We hope that this fixes a COM server activation bug if the
user doesn't have a CRT installed globally on their system.
Fixes#11529
(cherry picked from commit def1bdd693)
Since the settings UI's input fields behave similarly to the terminal's input,
`TerminalPage::_KeyDownHandler` also needs to behave similarly to
`TermControl::_KeyHandler`. This commit copies all relevant code
over from the latter into the former, including the suppression
of AltGr keys for keychord/action handling.
## PR Checklist
* [x] Closes#11788
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Use a German keyboard layout
* Open 2 regular tabs and 1 settings tab and focus an input field
* AltGr+2 produces the character ² ✔️
* Ctrl+Alt+2 opens the second tab ✔️
(cherry picked from commit 80f8383860)
Don't crash if we try to save the window layout while we are closing, and try to avoid saving at all.
Might impact #11354
## Detailed Description of the Pull Request / Additional comments
- Revoke the event handler/save throttler so we don't even try to get the window layout when we are closing
- Try to check for nullptrs, but then apply `try {} CATCH_LOG()` liberally
## Validation Steps Performed
The happy path of saving normally is still fine, but I haven't been unlucky enough to trigger the crash myself.
This commit reduces the number of generated VS profiles from 6 down to just 2
per VS instance. The reason we did this is out of concern of overwhelming or
annoying new users with too many profiles. Especially since it's far easier
at the moment to add new generators compared to removing them.
As before only the latest instance is not hidden by default.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [x] As discussed in a Team Sync meeting
## Validation Steps Performed
* Installed Visual Studio 2019 and 2022 Preview
* A profile for both is generated, while the 2019 one is hidden by default ✔️
* $env:VSCMD_ARG_TGT_ARCH is x64 on my AMD64 machine ✔️
Considering the number of reports of "defterm isn't working (mysteriously)", I figured more logging current hurt. I also added a wprp profile for the defterm logging as well, which should capture conhost side things as well.
From an elevated conhost:
```
wpr -start path\to\Terminal.wprp!Defterm.Verbose
wpr -stop %USERPROFILE%\defterm-trace.etl
```
* [x] I work here
* [x] relevant to: #10594, #11529, #11524.
## Summary of the Pull Request
Currently when configuring the action
```json
{ "command": { "action": "closeTabsAfter" } }
```
we get a schema error in VSCode: `Matches multiple schemas when only one must validate.`.
The problem is that it matches both `closeTabsAfter` and `closeTab`, since the schema uses regex patterns to match instead of plain strings. I swapped the usage of `"pattern"` with `"const"` for all actions.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I checked and this action configuration no longer errors.
Up until this commit PSReadline caused OutputDebugString to be called
with a complex log message to on every newline. At the time of writing,
Visual Studio's Output window is fairly slow and after this change newlines
feel a fair bit snappier when running under Visual Studio's debugger.
## Validation Steps Performed
* pwsh.exe continues to work correctly ✔️
ControlCore::FontFaceName() is called 10/s by TSFInputControl.
The getter was modified to cache the STL string in a hstring allowing
us to return a value without temporary allocations during runtime.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Font face and size changes properly update TSFInputControl ✔️
## Summary of the Pull Request
Currently when configuring the action
```json
{ "command": { "action": "commandPalette", "launchMode": "commandLine" }, "key": "ctrl+shift+p" }
```
or
```json
{ "command": { "action": "multipleActions", "actions": [{ "action": "paste" }] }, "key": "ctrl+shift+v" }
```
we get a schema error in VSCode. These object variants of the actions were not configured properly in the schema, so I fixed it.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
In the schema there is a big `oneOf` for the `command` of an action under `actions`.
Commands that also accept extra arguments have an object type defined for it.
The `commandPalette` and `multipleActions` commands accept extra arguments, and also have matching `CommandPaletteAction` and `MultipleActionsAction` object types defined, but they are unused.
So I added them to the `oneOf` array in the correct placement.
## Validation Steps Performed
## Summary of the Pull Request
The `settings.json` schema had `"default"`s for some boolean settings set as quoted strings (`"true"` / `"false"`), so I removed the quotes.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
VSCode autocompletes the default value when you select the setting in intellisense, so it autocompleted a string which caused a schema error. Booleans should be JSON booleans, not quoted.
## Validation Steps Performed
## Summary of the Pull Request
As a part of the Interactivity split, `TermControlAutomationPeer` had to be split into `TermControlAutomationPeer` (TCAP) and `InteractivityAutomationPeer` (IAP). Just about all of the functions in `InterativityAutomationPeer` operate by calling the non-XAML UIA Provider then wrapping the resulting `UIATextRange` into a XAML format (a `XamlUiaTextRange` [XUTR]). As a part of that XUTR constructor, we need a reference to the parent provider.
We generally get that via `ProviderFromPeer()`, but IAP's `ProviderFromPeer()` returned null (presumably because IAP isn't in the UI tree, whereas TCAP is directly registered as the automation peer for the `TermControl`).
It looks like some screen readers didn't care (like NVDA, though there may be a chance we just didn't encounter an issue just yet), but Narrator definitely did.
The fix was to provide XUTR constructors the `ProviderFromPeer` from TCAP, _not_ IAP. To accomplish this, IAP now holds a weak reference to TCAP, and provides the `ProviderFromPeer` when needed. We can't cache this result because there is no guarantee that it won't change.
Some miscellaneous changes include:
- `TermControl::OnCreateAutomationPeer` now returns the existing auto peer instead of always creating a new one
- `TCAP::WrapArrayOfTextRangeProviders` was removed as it was unused (normally, this would be directly affected by the main `ProviderFromPeer` change here)
- `XUTR::GetEnclosingElement` is now hooked up to trace logging for debugging purposes
## References
Introduced in #10051Closes#11488
## Validation Steps Performed
✅ Narrator scan mode now works (verified with character, word, and line navigation)
✅ NVDA movement still works (verified with word and line navigation)
## Summary of the Pull Request
When the window moves, hide any visible content dialog (only one can be shown at a time) and ensure its associated async operation is terminated.
#10922 dismisses any open popups when the window is moved or any scroll viewer scrolls. However, if you just close a Popup from the UI tree, the async operation associated to a ContentDialog (started with `dialog.ShowAsync`) does not terminate. The dialog lock that prevents opening multiple dialogs at the same time is not released, and no further dialog can be shown.
Explicitly dismissing the only visible ContentDialog using its `Hide` method terminates the operation.
## Validation Steps Performed
Manual tests, open up dialogs and move the window (like in #11425)
References #10922Closes#11425
This commit enables /fp:fast. This doubles the performance of the Delta E
computation in #11095 for instance. Additionally it re-enables two options for
debug builds which are normally enabled by default by Visual Studio.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* No change in binary size
* No obvious change in behavior
This change enables access to the Defaults page in stable builds of
terminal. It is intended that we backport this feature flag edit to
1.11, so that Defaults can roll out with 1.11 when it becomes stable.
If we find that the settings file doesn't exist, or is empty, then let's quick
delete the state file as well. If the user does have a state file, and not a
settings, then they probably tried to reset their settings. It might have data
in it that was only relevant for a previous iteration of the settings file. If
we don't, we'll load the old state and ignore all dynamic profiles (for
example)!
We'll remove all of the data in the `ApplicationState` object and reset it to
the defaults.
This will delete the state file!
That's the sure-fire way to make sure the data doesn't come back. If we leave
it untouched, then when we go to write the file back out, we'll first re-read
it's contents and try to overlay our new state. However, nullopts won't remove
keys from the JSON, so we'll end up with the original state in the file.
* [x] Closes#11119
* [x] Tested on a cold launch of the Terminal with an existing `state.json`
and an empty `settings.json`
* [x] Tested a hot-reload of deleting the `settings.json`
This implements command line matching for `CascadiaSettings::GetProfileForArgs`.
The command lines for all user profiles are resolved to absolute file paths,
argument quotes are standardized ("canonicalized") and the results are cached.
When `GetProfileForArgs` is called with a Commandline() value, we "canonicalize"
the argument as well and find the profile that is the longest prefix.
If none could be found the default profile is returned.
## PR Checklist
* [x] Closes#9458
* [x] Closes#10952
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* Open a `cmd.exe` tab in the store-version of WT
* Run `start cmd`
--> A tab with the `cmd.exe` profile opens
* Run `start pwsh.exe`
--> A tab with the PowerShell 7 profile opens
* Run PowerShell 7 from the start menu
--> A tab with the PowerShell 7 profile opens
* Create a symlink for PowerShell 7 and launch `pwsh.exe` from there
--> A tab with the PowerShell 7 profile opens
I thought that microsoft/microsoft-ui-xaml#3183 might just fix this for us, but it didn't. We've got our RadioButton's all up in SettingsContainers, so they all think they're `AutomationProperties.AccessibilityView="Raw"` for some reason. If you simply add the `Content` to these, then they all end up correct in Accessibility Insights
## PR Checklist
* [x] Will take care of #11248 but I can't be the one to close it.
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
This commit adds a simple information popup about default terminals,
guiding first-time Windows 11 users into changing the default terminal.
## Validation Steps Performed
* Info bar pops up on Windows 11 ✔️
* Info bar can be dismissed persistently ✔️
This was originally in #11308. Thought we should check it in for 1.12 even
though that won't merge this release. Should slightly mitigate the number of
users that see this warning.
`CascadiaSettings::_createNewProfile` failed to call `_FinalizeInheritance`.
This commits fixes the issue and adds a stern warning for future me.
## PR Checklist
* [x] Closes#11392
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Open settings UI
* Modify font size in base layer
* _Don't_ save
* Duplicate any profile with default font size
* Ensure the duplicated profile shows the modified base layer font size ✔️
In #11180 we made `opacity` independent from `useAcrylic`. We also changed the mouse wheel behavior to only change opacity, and not mess with acrylic.
However, on Windows 10, vintage opacity doesn't work at all. So there, we still need to manually enable acrylic when the user requests opacity.
* [x] Closes#11285
SUI changes in action:
It's possible that we're about to be started, _before_
our paired connection is started. Both will get Start()'ed when
their owning TermControl is finally laid out. However, if we're
started first, then we'll immediately start printing to the other
control as well, which might not have initialized yet. If we do
that, we'll explode.
Instead, wait here until the other connection is started too,
before actually starting the connection to the client app. This
will ensure both controls are initialized before the client app
is.
Fixes#11282
Tested: Opened about 100 debug taps. They all worked. :shipit:
`CascadiaSettings` is default constructed when human readable error messages are
returned. Even in such cases we need to ensure that all fields are properly
initialized, as a caller might decide to call a `GlobalSettings` getter.
Thus a crash occurred whenever a user was hot-reloading their settings file with
invalid JSON as other code then tried to compare the `GlobalSettings()`.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Start Windows Terminal and ensure the settings load fine
* Add `"commandline": 123` to any of the generated profiles in settings.json
* The application doesn't crash and shows a warning message
WinUI/XAML requires the `SelectedItem` to be member of the list of
`ItemsSource`. `CascadiaSettings::DefaultTerminals()` is such an `ItemsSource`
and is called every time the launch settings page is visited.
It calls `DefaultTerminal::Available()` which in turn calls `Refresh()`.
While the `SelectedItem` was cached in `CascadiaSettings`, the value of
`DefaultTerminals()` wasn't. Thus every time the page was visited, it refreshed
the `ItemsSource` list without invalidating the current `SelectedItem`.
This commit prevents such accidental mishaps from occurring in the future,
by moving the responsibility of caching solely to the `CascadiaSettings` class.
## PR Checklist
* [x] Closes#11424
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Navigating between SUI pages maintains the current dropdown selection ✔️
* Saving the settings saves the correct terminal at `HKCU:\Console\%%Startup` ✔️
## Summary of the Pull Request
Fixes two issues related to SUI's Actions page:
1. Crash when adding an action and setting key chord to one that is already taken
- **Cause**: the new key binding that was introduced with the "Add new" button appears in `_KeyBindingList` that we're iterating over. This has no `CurrentKeys()`, resulting in a null pointer exception.
- **Fix**: null-check it
2. There's an action that appears as being nameless in the dropdown
- **Cause**: The culprit seems to be `MultipleActions`. We would register it, but it wouldn't have a name, so it would appear as a nameless option.
- **Fix**: if it has no name, don't register it. This is also future-proof in that any new nameless actions won't be automatically added.
Closes#10981
Part of #11353
This commit fixes various failing TestHostApp unit tests.
Most of these broke as part of 168d28b (#11184).
## PR Checklist
* [x] Closes#11339
* [x] I work here
* [x] Tests added/passed
I've had a hard time with the tab colors this week.
Turns out that setting the background to nullptr will make the tabviewitem invisible to hit tests. `Transparent`, on the other hand, is totally valid, and the expected default.
Tabs as of this commit:
## PR Checklist
* [x] Closes#11382
* [x] I work here
This low-key reverts a bit of #11369, which fixed#11294, which regressed in #11240
This fixes an issue that Touch Keyboard is not invoked when user taps on the PowerShell.
Before this change, it was returning small rectangle on the right of the cursor. Touch Keyboard should be invoked by tapping anywhere inside the console.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
ITfContextOwner::GetScreenExt is used to define rectangle that can invoke Touch Keyboard.
https://docs.microsoft.com/en-us/windows/win32/api/msctf/nf-msctf-itfcontextowner-getscreenext
## Validation Steps Performed
* [x] Touch keyboard was invoked by tapping inside the Console while Hardware Keyboard was not attached.
* [x] Selecting text worked as expected without invoking touch keyboard.
* [x] Long tapping the console invoked Touch Keyboard. I would like to confirm if this is the expected behavior.
## Summary of the Pull Request
In `settings.json` there's an `actions` array to configure keybindings.
The action `globalSummon` has an argument called `dropdownDuration`.
The settings editor deleted this argument from the settings because of a typo in `ActionArgs.h`.
## PR Checklist
* [x] Closes#11400
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
There was a `JsonUtils::GetValueForKey` instead of a `JsonUtils::SetValueForKey`.
This is what happens when such code is not autogenerated.
## Validation Steps Performed
None
## Summary of the Pull Request
Fixes the "Reset to inherited value" button for the opacity slider and removes the unwanted padding between the header and the control.
## PR Checklist
* [x] Closes#11352
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Manually tested
## Summary of the Pull Request
The code saved `args.DropdownDuration()` to a local and then called the function again, instead of using the local.
Changed to use the local.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
I think this getter simply accesses a member on `args`, it doesn't parse the settings or anything, so compiler optimizes it, but seemed to make more sense to use the local.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Try to save the working directory if we know what it is (just copied what was done in duplicating a pane). I overlooked this in my original implementation that always used the settings StartingDirectory.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#9800
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tried setting the working directory using the OSC 9;9 escape and confirmed that the directory saves correctly.
## Summary of the Pull Request
The type of the `"id"` argument of the `focusPane` action under `"actions"` in the `settings.json` schema was incorrectly set to a string.
It's actually expecting a non-negative number, and defaults to 0.
So I fixed the schema.
## PR Checklist
* [x] Closes#11393
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I've validated that a string makes Windows Terminal complain it's a string and not a number, and that a number works as expected, and that the default is indeed zero.
This commit introduces a number of poor abstractions to split
`SettingsLoader::_parse` into `_parse` for content in the format of the user's
settings.json and `_parseFragment` which is specialized for fragment files.
The latter suppresses exceptions and supports the "updates" key for profiles.
## PR Checklist
* [x] Closes#11330
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Wrote the following to
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments\test\test.json`:
```json
{
"profiles": [
{
"name": "bad",
"unfocusedAppearance": ""
},
{
"name": "good"
},
{
"updates": "{574e775e-4f2a-5b96-ac1e-a2962a402336}",
"background": "#333"
}
]
}
```
* Ensured that "bad" is ignored ✔️
* Ensured that "good" shows up and works ✔️
* Ensured that the pwsh profile has a gray background ✔️
Just like in #9760, we can't actually use the UWP file picker API, because it will absolutely not work at all when the Terminal is running elevated. That would prevent the picker from appearing at all. So instead, we'll just use the shell32 one manually.
This also gets rid of the confirmation dialog, since the team felt we didn't really need that. We could maybe replace it with a Toast (#8592), but _meh_
* [x] closes#11356
* [x] closes#11358
* This is a lot like #9760
* introduced in #11062
* megathread: #9700
## Summary of the Pull Request
The deadlock was caused by `ScreenInfoUiaProviderBase::GetSelection()` calling `TermControlUiaProvider::GetSelectionRange` (both of which attempted to lock the console). This PR removes the lock and initialization check from `TermControlUiaProvider`. It is no longer necessary because the only one that calls it is `SIUPB::GetSelection()`.
Additionally, this adds some code that was useful in debugging this race condition. That should help us figure out any locking issues that may come up in the future.
## References
#11312Closes#11385
## Validation Steps Performed
✅ Repro steps don't cause hang
## Summary of the Pull Request
Similar to `vswhere -latest`, show only the latest Visual Studio command prompts / developer PowerShell. This was tested by deleting the local package state and testing against fresh state with both VS2019 and VS2022 Preview installed, and indeed VS2022 Preview (both cmd and powershell) show. The other profiles were generated but hidden by default.
## References
Modification of PR #7774
## PR Checklist
* [x] Closes#11307
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
The sort algorithm is the same basic algorithm I used in https://github.com/microsoft/vswhere. It sorts first by installation version with a secondary sort based on the install date in case the installation versions are the same.
## Validation Steps Performed
With both VS2019 and VS2022 Preview installed, I made sure the initial state was expected, and tried different combinations of hiding and unhiding generated entries, and restarted Terminal to make sure my settings "stuck".
All these controls didn't have `Name`s assigned, and Accessibility Insights doesn't like that. Their parents did, but the actual focusable elements themselves didn't. So I've just taken the nearby headers for these things and slapped them in as the Automation names for these controls.
I verified that each of these automated tests in Accessibility Insights pass again.
* Will do the thing to #11155 but we need confirmation before that can be closed.
DESPITE the fact that there's a `Background()` API that we
could just call like:
```c++
TabViewItem().Background(deselectedTabBrush);
```
We actually can't, because it will make the part of the tab that
doesn't contain the text totally transparent to hit tests. So we
actually _do_ still need to set `TabViewItemHeaderBackground` manually.
* Regressed in #11240
* Root cause up in https://github.com/microsoft/microsoft-ui-xaml/pull/3769
* [x] closes#11294
Missed this in #11180. I forgot to init the BG opacity with the renderer on startup, because that matters when you have `"antialiasingMode": "cleartype",`.
Repro json
```json
{
"commandline": "cmd.exe",
"guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
"hidden": false,
"opacity": 35,
"antialiasingMode": "cleartype",
"padding": "0",
"name": "Command Prompt"
},
```
* [x] Fixes#11315
## Summary of the Pull Request
This replaces the `GridLines` enum in the renderers with a `til::enumset` type, avoiding the need for the various `WI_IsFlagSet` macros and flag operators.
## References
This is followup to PR #10492 which introduced the `enumset` class.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Validation Steps Performed
I've manually confirmed that all the different gridlines are still rendering correctly in both the GDI and DX renderers.
This logic was seemingly redundant. There's two cases I'm looking at here:
#### Case 1
```jsonc
"defaults":
{
"opacity": 35
},
"list":
[
{
"commandline": "cmd.exe",
"name": "Command Prompt"
},
```
In this case, we wouldn't set the `TerminalSettings` Opacity to .35, we'd set it to 1.0, because the profile didn't have an `opactity`.
#### Case 2
```jsonc
"defaults":
{
"useAcrylic": true
},
"list":
[
{
"commandline": "cmd.exe",
"name": "Command Prompt"
},
```
In this case we still want to have an acrylic effect. Previously, we'd default this effect to 50% opaque. I'm not sure that we can actually get that anymore. BUT it turns out, we _can_ have 100% opacity and HostBackdropAcrylic. It is very subtle, but is maybe something we should be allowing anyways. It kinda looks like:
* [x] Fixes#11355
* [x] Regressed in #11180
* [x] I work here
* [x] Fixes a bunch of the checkboxes in #11352
* [x] Fixes one of the boxes in #11353
* [x] The opacity warning -> error gibberish was fixed with the change to `DeserializationError` - `asCString` only works if the `JsonValue` is a string already.
This fixes two issues with profiles.schema.json:
* The `$schema` should not end in a `#`
* `$defs` is the official reserved keyword for schema re-use
See: http://json-schema.org/draft/2020-12/json-schema-core.html
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [x] Schema updated
## Validation Steps Performed
The previous schema didn't pass https://jschon.dev/, the new schema does.
This commit adds the ability to interact with subtrees of panes.
Have you ever thought that you don't have enough regression testing to
do? Boy do I have the PR for you! This breaks all kinds of assumptions
about what is or is not focused, largely complicated by the fact that a
pane is not a proper control. I did my best to cover as many cases as I
could, but I wouldn't be surprised if there are some things broken that
I am unaware of.
Done:
- Add `parent` and `child` movement directions to move up and down the
tree respectively
- When a parent pane is selected it will have borders all around it in
addition to any borders the children have.
- Fix focus, swap, split, zoom, toggle orientation, resize, and move to
all handle interacting with more than one pane.
- Similarly the actions for font size changing, closing, read-only, clearing
buffer, and changing color scheme will distribute to all children.
- This technically leaves control focus on the original control in the
focused subtree because panes aren't proper controls themselves. This
is also used to make sure we go back down the same path with the
`child` movement.
- You can zoom a parent pane, and click between different zoomed
sub-panes and it won't unzoom you until you use moveFocus or another
action. This wasn't explicitly programmed behavior so it is probably
buggy (I've quashed a couple at least). It is a natural consequence of
showing multiple terminals and allowing you to focus a terminal and a
parent separately, since changing the active pane directly does not
unzoom. This also means there can be a disconnect between what pane is
zoomed and what pane is active.
## Validation Steps Performed
Tested focus movement, swapping, moving panes, and zooming.
Closes#10733
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Continuation of https://github.com/microsoft/terminal/pull/10972 to handle multiple windows, requires that to be merged first.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Also closes#766
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Rough changelog:
Normally saving is triggered to occur every 30s, or sooner if a window is created/closed. The existing behavior of saving on last close is maintained to bypass that throttling. The automatic saving allows for crash recovery. Additionally all window layouts will be saved upon taking the `quit` action.
For loading we will check if we are the first window, that there are any saved layouts, and if the setting is enabled, and then depending on if we were given command line args or startup actions.
- create a new window for each saved layout, or
- take the first layout for our self and then a new window for each other layout.
This also saves the layout when the quit action is taken.
Misc changes
- A -s,--saved argument was added to the command line to facilitate opening all of the windows with the right settings. This also means that while a terminal session is running you can do wt -s idx to open a copy of window idx. There isn't a stable ordering of which idx each window gets saved as (it is whatever the iteration order of _peasants is), so it is just a cute hack for now.
- All position calculation has been moved up to AppHost this does mean we need to awkwardly pass around positions in a couple of unexpected places, but no solution was perfect.
- Renamed "Open tabs from a previous session" to "Open windows from a previous session". (not reflected in video below)
- Now save runtime tab color and window names
- Only enabled for non-elevated windows
- Add some change tracking to ApplicationState
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
`SettingsLoader::_parse` used to skip profiles which didn't have either a "guid"
or "name" field, due to #9962. This is however wrong for fragment loading, as
fragments can alternatively use an "updates" field instead of guid/name.
`SettingsLoader::_parse` was updated to allow profiles with this alternative
field during fragment loading.
## PR Checklist
* [x] Closes#11331
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Wrote the following to
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments\test\test.json`:
```json
{
"profiles": [
{
"updates": "{574e775e-4f2a-5b96-ac1e-a2962a402336}",
"background": "#FFD700"
}
]
}
```
## Summary of the Pull Request
This introduces a new TIL class that is equivalent in functionality to a `std::bitset`, but where the positions in the bitset are enum values. It also has a few additional methods allowing for setting and testing multiple positions at the same time. The idea is that this class could be used in place of the `WI_SetFlag` and `WI_IsFlagSet` macros when working with sets of flags.
## PR Checklist
* [x] Closes#10432
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #10432
## Validation Steps Performed
I've added a few unit tests that verify the behaviour of all the new methods that aren't part of `std::bitset`. I've also tried it out as a replacement for the `GridLines` enum used in the renderer, and confirmed that it has all the functionality needed to replace that cleanly.
This commit fixes layering of fragment profiles without an update key.
The previous CascadiaSettings deserializer first assembled all builtin
profiles and only then parsed the user's settings.json file.
This meant that even though fragment profiles were added to `_allProfiles`
unconditionally, they did get layered properly with user profiles regardless,
as user profiles were always properly layered.
The new CascadiaSettings approach since 168d28b was a direct translation of this
approach but this is incorrect: As the new approach reads user profiles first,
all inbox profiles, including fragments, must equally use proper layering,
instead of adding profiles unconditionally.
While this commit fixes the bug it maintains a regression:
Duplicate fragment profile GUIDs will not be detected and instead fragments with
identical GUID will all be added as parents to a single user profile.
I considered to fix this regression, but felt that this new behavior is better
than the old one, since a user often can't directly control installed fragments,
and is unlikely to occur in practice. This simplifies the implementation.
## PR Checklist
* [x] Closes#11323
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Fragment layering works ✔️
Ensures that command-lines constructed to invoke `wt` are escaped properly.
## PR Checklist
* [x] Closes#11273
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
This was broken in two places - when constructing the command-line in the shell extension and in `NewTerminalArgs::ToCommandline()`.
Both places now invoke a shared method to escape the command-line arguments that require it.
## Validation Steps Performed
Added a test and additionally:
* Invoked the shell extension from `D:\Downloads\With;Semicolon`.
* Added a `newWindow` action to `settings.json` as below and ensured the new window opened without erroring.
```json
{
"command":
{
"action": "newWindow",
"tabTitle": "\";foo\\"
},
"keys": "ctrl+shift+s"
}
```
Adds a check before every UIA function call to ensure the terminal (specifically the buffer) is initialized before doing work. Both the `ScreenInfoUiaProvider` and the `UiaTextRange` are now covered.
## References
Closes#11135#10971 & #11042
## Detailed Description of the Pull Request / Additional comments
Originally, I tried applying this heuristic to all the `RuntimeClassInitialize` on `UiaTextRangeBase` with the philosophy of "a range pointing to an invalid buffer is invalid itself", but that caused a regression on [MSFT 33353327](https://microsoft.visualstudio.com/OS/_workitems/edit/33353327).
`IUiaData` also has `GetTextBuffer()` return a `TextBuffer&`, which cannot be checked for nullness. Instead, I decided to add a function to `IUiaData` that checks if we have a valid state. Since this is shared with Conhost and Conhost doesn't have this issue, I simply make that function say that it's always in a valid state.
## Validation Steps Performed
- [X] Narrator can detect newly created terminals
- [X] (On Windows Server 2022) Windows Terminal does not hang on launch
Implements the following keyboard selection non-configurable key bindings:
- shift+arrow --> move endpoint by character
- ctrl+shift+left/right --> move endpoint by word
- shift+home/end --> move to beginning/end of line
- ctrl+shift+home/end --> move to beginning/end of buffer
This was purposefully done in the ControlCore layer to make keyboard selection an innate part of how the terminal functions (aka a shared component across terminal consumers).
## References
#715 - Keyboard Selection
#2840 - Spec
## Detailed Description of the Pull Request / Additional comment
The most relevant section is `TerminalSelection.cpp`, where we define how each movement operates. It's basically a giant embedded switch-case statement. We leverage a lot of the work done in a11y to perform the movements.
## Validation Steps Performed
- General cases:
- test all of the key bindings added
- Corner cases:
- `char`: wide glyph support
- `word`: move towards, away, and across the selection pivot
- automatically scroll viewport
- ESC (and other key combos) are still clearing the selection properly
I've done this process enough times that I should have written a script
to do it a while ago. This one is rough, but the whole changelog process
is pretty rough.
This script takes multiple revision ranges and produces something that
looks like a rough untranslated changelog, with indicators for how many
of the provided ranges had the same change (deduplicated by title.)
I use a process like this to build the Stable and Preview release notes
out of a set of revision ranges.
This introduces a spec for keyboard selection. This enables the user to create and update a selection without the use of a mouse or stylus.
## References
Contributes to #715
For some weird reason we sometimes receive a WM_KEYDOWN
message without vkey or scanCode if a user drags a tab.
The KeyChord constructor has a debug assertion ensuring that all KeyChord
either have a valid vkey/scanCode. This is important, because this prevents
accidential insertion of invalid KeyChords into classes like ActionMap.
## PR Checklist
* [x] Closes#11076
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Tab dragging doesn't produce assertion failures anymore ✔️
## Summary of the Pull Request
Fixes the 24 failing generated tests. 20 of them were fixed by enforcing the following rule: when moving backwards by word...
- a degenerate range moves to the beginning of the word, then to the word behind it.
- a non-degenerate range outright moves to the word behind it.
The fix was simple: if we're a degenerate range, check if we're at the beginning of the word. If not, move there. Otherwise, move to the word before it. See UiaTextRangeBase.cpp changes for implementation details.
Along the way, several misauthored tests were found:
- 2 generated tests:
- Cause: MS Word considers a line break a word delimiter. We don't use line-wrapping to distinguish two separate words.
- `MovementAtExclusiveEnd` backwards word movement tests:
- `end` will always be `writeTarget` because...
- [degenerate range case] both `start` and `end` are moved to the beginning of the word (`writeTarget`)
- [non-degenerate range case] from the `UiaTextRangeBase` bugfix, we should be moving to the word behind it.
- this misauthored test was explicitly found by fixing the bug first explained here.
## References
#10925 Word navigation testing
This commit reduces the code surface that interacts with raw JSON data,
reducing code complexity and improving maintainability.
Files that needed to be changed drastically were additionally
cleaned up to remove any code cruft that has accrued over time.
In order to facility this the following changes were made:
* Move JSON handling from `CascadiaSettings` into `SettingsLoader`
This allows us to use STL containers for data model instances.
For instance profiles are now added to a hashmap for O(1) lookup.
* JSON parsing within `SettingsLoader` doesn't differentiate between user,
inbox and fragment JSON data, reducing code complexity and size.
It also centralizes common concerns, like profile deduplication and
ensuring that all profiles are assigned a GUID.
* Direct JSON modification, like the insertion of dynamic profiles into
settings.json were removed. This vastly reduces code complexity,
but unfortunately removes support for comments in JSON on first start.
* `ColorScheme`s cannot be layered. As such its `LayerJson` API was replaced
with `FromJson`, allowing us to remove JSON-based color scheme validation.
* `Profile`s used to test their wish to layer using `ShouldBeLayered`, which
was replaced with a GUID-based hashmap lookup on previously parsed profiles.
Further changes were made as improvements upon the previous changes:
* Compact the JSON files embedded binary, saving 28kB
* Prevent double-initialization of the color table in `ColorScheme`
* Making `til::color` getters `constexpr`, allow better optimizations
The result is a reduction of:
* 48kB binary size for the Settings.Model.dll
* 5-10% startup duration
* 26% code for the `CascadiaSettings` class
* 1% overall code in this project
Furthermore this results in the following breaking changes:
* The long deprecated "globals" settings object will not be detected and no
warning will be created during load.
* The initial creation of a new settings.json will not produce helpful comments.
Both cases are caused by the removal of manual JSON handling and the
move to representing the settings file with model objects instead
## PR Checklist
* [x] Closes#5276
* [x] Closes#7421
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Out-of-box-experience is identical to before ✔️
(Except for the settings.json file lacking comments.)
* Existing user settings load correctly ✔️
* New WSL instances are added to user settings ✔️
* New fragments are added to user settings ✔️
* All profiles are assigned GUIDs ✔️
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#11083#11143
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
While testing the save/quit features a number of issues were found that were caused by poor synchronization on the monarch, resulting in various unexpected crashes. Because this uses std collections, and I didn't see any builtin winrt multithreaded containers I went with the somewhat heavy-handed mutex approach.
e.g.
- https://github.com/microsoft/terminal/pull/11083#issuecomment-916218353
- https://github.com/microsoft/terminal/pull/11083#issuecomment-916220521
- https://github.com/microsoft/terminal/pull/11143/#discussion_r704738433
This also makes it so that on quit peasants don't try to become the monarch, and the monarch closes their peasant last to prevent elections from happening.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Create many windows (hold down ctrl-shift-n) then use the quit action from peasants/the monarch to make sure everything closes properly.
Process exit code now shows as hex not decimal. Format specification needs length "10" not "8" because the leading '0x' generated by the # symbol counts as part of the length.
## PR Checklist
* [x] Closes annoyance at looking up process exit codes
* [x] I work here.
* [x] Checked manually
## Validation Steps Performed
- [x] Ran it, opened tab, opened another CMD tab, ran `exit <code>` and observed hex pattern
## Summary of the Pull Request
Clears selection render on paste
## PR Checklist
* [x] Closes#11227
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
Added ```_renderer->TriggerSelection(); ``` similarly to the copy action few lines up in ```CopySelectionToClipboard``` function
## Validation Steps Performed
Manually tested
* this is the same thing as #10996, but with the fix that caused us to #11031
* This includes https://github.com/microsoft/microsoft-ui-xaml/pull/3769, so we had to make some adjustments to how we handle tab colors. It works the same as before.
* Should enable #11231 to be started
* [x] Closes#10508
* [x] Closes#7133
* [x] Closes#8948
* [ ] I need to finish letting my 19H1 VM boot to make sure unpackaged still works
## Summary of the Pull Request
Adds support for vintage style opacity, on Windows 11+. The API we're using for this exists since the time immemorial, but there's a bug in XAML Islands that prevents it from working right until Windows 11 (which we're working on backporting).
Replaces the `acrylicOpacity` setting with `opacity`, which is a uint between 0 and 100 (inclusive), default to 100.
`useAcrylic` now controls whether acrylic is used or not. Setting an opacity < 100 with `"useAcrylic": false` will use vintage style opacity.
Mouse wheeling adjusts opacity. Whether acrylic is used or not is dependent upon `useAcrylic`.
`opacity` will stealthily default to 50 if `useAcrylic:true` is set.
## PR Checklist
* [x] Closes#603
* [x] I work here
* [x] Tests added/passed
* [x] https://github.com/MicrosoftDocs/terminal/pull/416
## Detailed Description of the Pull Request / Additional comments
Opacity was moved to AppearanceConfig. In the future, I have a mind to allow unfocused acrylic, so that'll be important then.
## Validation Steps Performed
_just look at it_
Adjust tools version for folks running on 2022
## PR Checklist
* [x] Closes annoyance that @lhecker and I have selfhosting VS2022
* [x] I work here
* [x] Solution built
* [x] @dhowett said something like "lol sure" in Teams.
## Summary of the Pull Request
Updates our `UiaTextRange` to no longer treat the end of the buffer as the "document end". Instead, we consider the "document end" to be the line beneath the cursor or last legible character (whichever is further down). In the event where the last legible character is on the last line of the buffer, we use the "end exclusive" position (left-most point on a line one past the end of the buffer).
When movement of any kind occurs, we clamp each endpoint to the document end. Since the document end is an actual spot in the buffer (most of the time), this should improve stability because we shouldn't be pointing out-of-bounds anymore.
The biggest benefit is that this significantly improves the performance of word navigation because screen readers no longer have to take into account the whitespace following the end of the prompt.
Word navigation tests were added to the `TestTableWriter` (see #10886). 24 of the 85 tests were failing, however, they don't seem to interact with the document end, so I've marked them as skip and will fix them in a follow-up. This PR is large enough as-is, so I'm hoping I can take time in the follow-up to clean some things on the side (aka `preventBoundary` and `allowBottomExclusive` being used interchangeably).
## References
#7000 - Epic
Closes#6986Closes#10925
## Validation Steps Performed
- [X] Tests pass
- [X] @codeofdusk has been personally testing this build (and others)
When we're elevated, we disable drag/dropping tabs when elevated, because of a platform limitation that causes the app to _crash_ (see #4874). However, if the user has UAC disabled, this actually works alright. So I'm adding it back in that case.
I'm not positive if this is the best way to check if UAC is disabled, but normally, you'll get a [`TokenElevationTypeFull`] when elevated, not `TokenElevationTypeDefault`. If the app is elevated, but there's not a split token, that kinda implies there's no user account separation. If I'm wrong, it's just code, let's replace this with something that does work.
## Validation Steps Performed
Booted up a Win10 VM, set `enableLUA` to `0`, rebooted, and checked if this exploded. It didn't.
References #4874
References #3581
Work done in pursuit of #11096Closes#7754
[`TokenElevationTypeFull`]: https://docs.microsoft.com/en-us/windows/win32/api/winnt/ne-winnt-token_elevation_type
This commit aligns the COM-consuming code in VsSetupInstance with best
practices such as passing COM pointers by pointer when they do not need
to be owning references and not using `const` on members, as well as
cleans up some dead code.
Leonard contributed clang-tidy fixes and some reference passing
changes.
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
This commit adds dynamic profile generators for Visual Studio Developer
Command Prompt (VS2017+) and Visual Studio Developer PowerShell
(VS2019.2+)
Tested manually by deploying locally. My local environment has four
instances of VS installed, one VS2017 and multiple channels of VS2019.
We're wrapping the COM Visual Studio Setup Configuration API to query
for VS instances and retrieve the relevant properties. Two different
namespaces are used so the end-user can turn off one or the other. For
instance, end user may prefer to always use Developer PowerShell.
## Validation Steps Performed
1. Build locally using Visual Studio 2019
2. Deploy CascadiaPackage
3. Verify entries exist in profiles menu
4. Verify entries exist in settings.json
5. Open each profile
6. Validate start-in directory
7. Validate environment variables are as expected
8. Uninstall Windows Terminal - Dev package
9. Repeat.
Closes#3821
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds directional modifiers for SplitState and convert those to the appropriate horizontal/vertical when splitting a pane.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4340
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
"vertical" and "horizontal" splits were removed from `defaults.json`, but code was added to parse those as `right` and `down` respectively. It is also the case that if a user has a custom hotkey for `split: vertical` it will override the default for `split: right`.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Split the pane using each of the new directional movements
## Summary of the Pull Request
Fixes the serialisation of the findMatch action so that the direction is stored.
## PR Checklist
* [x] Closes#11225
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Added a test and tested manually.
This PR simply replaces all uses of "TrayIcon" and "Tray" with "NotificationIcon" and "NotificationArea" to be more accurate. Originally I kinda wanted to only replace all occurrences of it in settings and user facing things, but I figured I might as well make it consistent throughout all of our code.
Fix infinite loop when trying to summon a window after close.
In #10972 code was added to try to clean up state manually when a window
was closed instead of waiting for it to be detected as a dead peasant.
Unfortunately I didn't know any better and missed cleaning up
`_mruPeasants` as well. The result is there would be an infinite loop
in `_getMostRecentPeasant` since `_getPeasant` will only clean up ids if
it finds a peasant, not if it doesn't find anything. This is the minimal
change to get this working, but it might be a good idea to make
`_getPeasant` be more thorough about cleanup.
## Validation Steps Performed
Tested that before the change we infinitely loop, and after the change
we summon correctly.
Closes#11215
This pull request moves us to Microsoft.Windows.CppWinRT 2.0.210825.3.
Notable improvements from 2.0.210309.3:
* Restored Windows 7 functionality
* C++20 ranges support
* `capture` now works with a raw pointer
* `hstring::starts_with` and `hstring::ends_with` (C++20)
Unit/Functional Tests:
Summary: Total=7728, Passed=7571, Failed=10, Blocked=0, Not Run=0, Skipped=147
Local Tests:
Summary: Total=163, Passed=158, Failed=5, Blocked=0, Not Run=0, Skipped=0
The above failures are (1) in UIA tests for conhost/WT (which do not work here) or
(2) in already known-broken local tests.
## Summary of the Pull Request
Basically undoes #10988 in favour of implementing it as described in #11018
## PR Checklist
* [x] Closes#11018
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [X] Schema updated.
* [x] I work here
## Validation Steps Performed
- alt+space opens the system menu by default
- when alt+space is bound, the keys do not get send to terminal
- right-click on the tab bar didn't break (still opens system menu at the location of the cursor)
## Summary of the Pull Request
* Introduces info bar shown upon session failure,
that guides the user how to configure termination behavior
* Allows this info bar to be dismissed permanently (choice stored in state)
* Allows "keyboard service" info bar to be dismissed permanently
## PR Checklist
* [x] Closes#10798, #8699
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
UI:
* Introduce an additional info bar for "close on exit" configuration tip
* Stack this bar after "keyboard service" bar
* Add "Don't show again" button to both bars
Dismiss Permanently:
* Introduce a set of "dismissed messages" to the Application State
* Add verification the message is not dismissed before showing an info bar
* "Don't show again" persists the choice under "dismissed messages"
Wiring the Info Bar:
* Register `TerminalPage` on `TermControl`'s `ConnectionStateChanged` event
* Once event is triggered check whether the state is failure
* If so and the message was not dismissed permanently, show the info bar
Add the ability to quit all terminal instances. Doing this separately from the window layout saving ones to lessen the number of 1k+ line monsters I make y'all review.
## References
#11083
## PR Checklist
* [x] Closes#11081
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
## Detailed Description of the Pull Request / Additional comments
- Warn the user before they do so to give a chance to cancel
- Percolate a QuitAll event up to the monarch who then directs each peasant to clsoe.
- Leave a window-layout-saving-sized hole to add that feature on top
## Validation Steps Performed
- quit with one window (from the monarch)
- quit from the monarch with multiple windows
- quit from a peasant
- cancel the quit dialog
This PR adds support for the `DECRQSS` (Request Selection or Setting)
escape sequence, which is a standard VT query for reporting the state of
various control functions. This initial implementation only supports
queries for the `DECSTBM` margins, and the `SGR` graphic rendition
attributes.
This can be useful for certain forms of capability detection (#1040). As
one example in particular, it can serve as an alternative to the
`COLORTERM` environment variable for detecting truecolor support
(#11057).
Of the settings that can be queried by `DECRQSS`, the only other one
that we could be supporting at the moment is `DECSCUSR` (Cursor Style).
However, that would require passing the query through to the conpty
client, which is a lot more complicated, so I thought it best to leave
for a future PR.
For now this gets the basic framework in place, so we are at least
responding to queries, and even just supporting the `SGR` attributes
query is useful in itself.
Validation
----------
I've added a unit test verifying the reports for the `DECSTBM` and `SGR`
settings with a range of different parameters. I've also tested the
`DECSTBM` and `SGR` reports manually in _Vttest_, under menu 11.2.5.3.6
(Status-String Reports).
This commit adds initial support for saving window layout on application
close.
Done:
- Add user setting for if tabs should be maintained.
- Added events to track the number of open windows for the monarch, and
then save if you are the last window closing.
- Saves layout when the user explicitly hits the "Close Window" button.
- If the user manually closed all of their tabs (through the tab x
button or through closing all panes on the tab) then remove any saved
state.
- Saves in the ApplicationState file a list of actions the terminal can
perform to restore its layout and the window size/position
information.
- This saves an action to focus the correct pane, but this won't
actually work without #10978. Note that if you have a pane zoomed, it
does still zoom the correct pane, but when you unzoom it will have a
different pane selected.
Todo:
- multiple windows? Right now it can only handle loading/saving one
window.
- PR #11083 will save multiple windows.
- This also sometimes runs into the existing bug where multiple tabs
appear to be focused on opening.
Next Steps:
- The business logic of when the save is triggered can be adjusted as
necessary.
- Right now I am taking the pragmatic approach and just saving the state
as an array of objects, but only ever populate it with 1, that way
saving multiple windows in the future could be added without breaking
schema compatibility. Selfishly I'm hoping that handling multiple
windows could be spun off into another pr/feature for now.
- One possible thing that can maybe be done is that the commandline can
be augmented with a "--saved ##" attribute that would load from the
nth saved state if it exists. e.g. if there are 3 saved windows, on
first load it can spawn three wt --saved {0,1,2} that would reopen the
windows? This way there also exists a way to load a copy of a previous
window (if it is in the saved state).
- Is the application state something that is planned to be public/user
editable? In theory the user could since it is just json, but I don't
know what it buys them over just modifying their settings and
startupActions.
Validation Steps Performed:
- The happy path: open terminal -> set setting to true -> close terminal
-> reopen and see tabs. Tested with powershell/cmd/wsl windows.
- That closing all panes/tabs on their own will remove the saved
session.
- Open multiple windows, close windows and confirm that the last window
closed saves its state.
The generated file stores a sequence of actions that will be executed to
restore the terminal to its saved form.
References #8324
This is also one of the items on microsoft/terminal#5000Closes#766
## Summary of the Pull Request
Make sure to always synchronously set the selected tab. This way when changing tabs while running multiple actions further calls to _GetFocusedTab will return the correct one.
**Edit** #11146 discovered while trying to test this so while I fixed the case I wanted, things seem to be broken generally so it is hard for me to test if I broke anything else.
## References
## PR Checklist
* [x] Closes#11107
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Ran the command specified in the issue and confirmed that the correct tab was focused and that the correct pane was zoomed.
## Summary of the Pull Request
Disables autocorrect for command, path and find text inputs. Does not disable it for profile names, tab titles or colour scheme names.
## PR Checklist
* [x] Closes#11133
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Manually typed `bash -i -l` into the profile command text input and found it no longer auto-capitalised the I.
## Summary of the Pull Request
This adds a new action, `clearBuffer`. It accepts 3 values for the `clear` type:
* `"clear": "screen"`: Clear the terminal viewport content. Leaves the scrollback untouched. Moves the cursor row to the top of the viewport (unmodified).
* `"clear": "scrollback"`: Clear the scrollback. Leaves the viewport untouched.
* `"clear": "all"`: (**default**) Clear the scrollback and the visible viewport. Moves the cursor row to the top of the viewport (unmodified).
"Clear Buffer" has also been added to `defaults.json`.
## References
* From microsoft/vscode#75141 originally
## PR Checklist
* [x] Closes#1193
* [x] Closes#1882
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is a bit tricky, because we need to plumb it all the way through conpty to clear the buffer. If we don't, then conpty will immediately just redraw the screen. So this sends a signal to the attached conpty, and then waits for conpty to draw the updated, cleared, screen back to us.
## Validation Steps Performed
* works for each of the three clear types as expected
* tests pass.
* works even with `ping -t 8.8.8.8` as you'd hope.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Make it so you can navigate pane focus without unzooming.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7215
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
- Slight refactor to bring the MRU pane logic into the `NavigateDirection` function
- The actual zoom behavior was not a problem, the only issue is that because most of the panes weren't in the UI tree I had to disable using the actual sizes. There is nothing wrong with that, since the synthetic sizing is required anyways, but I'm curious what other peoples' thoughts are.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
Remove those imports as they are unnecessary, _template.py_ contains these too but I guess it's fine since it's a template after all
## Summary of the Pull Request
**Naive implementation** of exporting the text buffer of the current pane
into a text file triggered from the tab context menu.
**Disclaimer: this is not an export of the command history,**
but rather just a text buffer dumped into a file when asked explicitly.
## References
Should provide partial solution for #642.
## Detailed Description of the Pull Request / Additional comments
The logic is following:
* Open a file save picker
* The location is Downloads folder (should be always accessible)
* The suggest name of the file equals to the pane's title
* The allowed file formats list contains .txt only
* If no file selected stop
* Lock terminal
* Read all lines till the cursor
* Format each line by removing trailing white-spaces and adding CRLF if not wrapped
* Asynchronously write to selected file
* Show confirmation
As the action is relatively fast didn't add a progress bar or any other UX.
As the buffer is relatively small, holding it entirely in the memory rather than
writing line by line to disk.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add a new action that can contain multiple other actions.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#3992
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Creates a shortcut action that allows a list of actions to be specified as arguments. Steals a bunch of the serialization code from my other pr. Overall, because I had the serialization code written already, this was remarkably easy.
I can't think of any combined action to be added to the defaults, so I think this is just a thing for the documentation unless someone else has a good example. I know there are lot of times when the recommended workaround is "make an action with commandline wt.exe ..." and this could be a good replacement for that, but that is all personalized.
I didn't add this to the command line parsing, since the command line is already a way to run multiple actions.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Created a new command, confirmed that "Move right->down" showed up in the command palette, and that running it did the correct behavior (moving right one pane, then down one pane).
```
{
"command": {
"action": "multipleActions",
"name": "Move right->down",
"actions": [
{"action": "moveFocus", "direction": "right" },
{"action": "moveFocus", "direction": "down" },
]
}
}
```
The first time you open commandline mode, `recentCommands` doesn't exist yet. However, we immediately try to read the `Size()` in a couple places. This'll A/V and we'll crash 😨
The fix is easy - don't try and read the size of the non-existent `recentCommands`
Found this while playing with #11069
Regressed in #11030
Didn't bother filing an issue for it when I have the fix in hand
This update fixes some minor ligature issues, font selection issues and
a problem with the Hebrew letter Vav when combined with Holam.
See microsoft/cascadia-code#538 for more details.
This is on me. When I got rid of the `_updatePatternLocations` `ThrottledFunc` in the `TermControl`, I didn't add a matching call to `_updatePatternLocations->Run()` in this method.
In #9820, in `TermControl::_ScrollPositionChanged`, there was still a call to `_updatePatternLocations->Run();`. (TermControl.cpp:1655 on the right) https://github.com/microsoft/terminal/pull/9820/files#diff-c10bb023995e88dac6c1d786129284c454c2df739ea547ce462129dc86dc2697R1654#10051 didn't change this
In #10187 I moved the `_updatePatternLocations` throttled func from termcontrol to controlcore. Places it existed before:
* [x] `TermControl::_coreReceivedOutput`: already matched by ControlCore::_connectionOutputHandler
* [x] `TermControl::_ScrollbarChangeHandler` -> added in c20eb9d
* [x] `TermControl::_ScrollPositionChanged` -> `ControlCore::_terminalScrollPositionChanged`
## Validation Steps Performed
Print a URL, scroll the wheel: it still works.
Closes#11055
This commit adds the ability to target the first pane in the tree,
always.
I wasn't able to find an existing issue for this, it is just a personal
feature for me. I won't be heartbroken if it does not get merged.
As motivation, I frequently have setups where the thing I am primarily
working on is a large pane on the left and everything else is in smaller
panes positioned elsewhere. I like to have one hotkey where I can go to
any pane and then make it the "primary" pane if I am changing what I am
working on or need to focus on another set of code/documentation/etc.
## Validation Steps Performed
Confirmed that the move focus and swap pane variants both affect the
correct pane.
Moves PGO runs to supported Helix pools. We need to match Microsoft-UI-XAML on which Helix pools we used for each type of activities.
## PR Checklist
* [x] Closes#10850
* [x] I work here
* [x] If it builds, it sits.
## Validation Steps Performed
* [x] Run PGO build against this branch
When moving a pane to a new tab previously we removed the event handlers
on it as if we were closing it, but we are just moving it so we need to
keep them.
I tried really hard to make sure all of the events were hooked up
correctly, but I guess I missed these originally since they are normally
created in the Pane constructor.
Closes#11035
## Validation Steps Performed
created panes, moved them to new tabs, confirmed that they close and
ding appropriately.
This pull request introduces our first use of the "base" profile as an
actual profile. Incoming commandlines from `wt foo` *and* default
terminal handoffs will be hosted in the base profile.
**THIS IS A BREAKING CHANGE** for user behavior.
The original behavior where commandlines were hosted in the "default"
profile (in most cases, Windows PowerShell) led to user confusion: "why
does cmd use my powershell icon?" and "why does the title say
PowerShell?". Making this change unifies the user experience so that we
can land commandline detection in #10952.
Users who want the original behavior can get it back for commandline
invocation by specifying a profile using the `-p` argument, as in `wt -p
PowerShell -- cmd`.
As a temporary stopgap, users who attempt to duplicate the base profile
will get their specified default profile until we land #5047.
This feature is hidden behind the same feature flag that controls the
visibility of base/"Defaults" in the settings UI.
Fixes#10669
Related to #6776
Only focus if there is a control to focus (which may be null if e.g. the focused tab is being destroyed)
Closes#11037
## Additional comments
I tried to remove the _activePane = nullptr in `TerminalTab::DetachPane` but that actually completely broke being able to focus the control at all making the tab completely unusable. Focus does seem to transfer just fine here with this change.
## Validation Steps Performed
Used the command execution to move panes to and from existing panes, including new tabs and destroying tabs.
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/1032-elevation-qol/doc/specs/%235000%20-%20Process%20Model%202.0/%231032%20-%20Elevation%20Quality%20of%20Life%20Improvements.md) ⇐
## Summary of the Pull Request
Despite my best efforts to mix elevation levels in a single Terminal window, it seems that there's no way to do that safely. With the dream of mixed elevation dead, this spec outlines a number of quality-of-life improvements we can make to the Terminal today. These should make using the terminal in elevated scenarios better, since we can't have M/E.
### Abstract
> For a long time, we've been researching adding support to the Windows Terminal
> for running both unelevated and elevated (admin) tabs side-by-side, in the same
> window. However, after much research, we've determined that there isn't a safe
> way to do this without opening the Terminal up as a potential
> escalation-of-privilege vector.
>
> Instead, we'll be adding a number of features to the Terminal to improve the
> user experience of working in elevated scenarios. These improvements include:
>
> * A visible indicator that the Terminal window is elevated ([#1939])
> * Configuring the Terminal to always run elevated ([#632])
> * Configuring a specific profile to always open elevated ([#632])
> * Allowing new tabs, panes to be opened elevated directly from an unelevated
> window
> * Dynamic profile appearance that changes depending on if the Terminal is
> elevated or not. ([#1939], [#8311])
## PR Checklist
* [x] Specs: #1032, #632
* [x] References: #5000, #4472, #2227, #7240, #8135, #8311
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
### Why are these two separate documents?
I felt that the spec that is currently in review in #7240 and this doc should remain separate, yet closely related documents. #7240 is more about showing how this large set of problems discussed in #5000 can all be solved technically, and how those solutions can be used together. It establishes that none of the proposed solutions for components of #5000 will preclude the possibility of other components being solved. What it does _not_ do however is drill too deeply on the user experience that will be built on top of those architectural changes.
This doc on the other hand focuses more closely on a pair of scenarios, and establishes how those scenarios will work technically, and how they'll be exposed to the user.
- When deciding whether to call `_AnalyzeFontFallback`, also check if the user set any font axes
- Do not use the user set weight if we are setting the weight due to the bold attribute
- When calling `FontFaceWithAttribute`, check if the user set the italic axis as well as the text attribute
* [x] Closes#10852
* [x] Closes#10853
It was insufficient to only promote commandline components to titles
during commandline parsing, because we also have a whole complement of
actions that contain NewTerminalArgs. The tests caught me out a little
too late (sorry!). I decided it was better move promotion down to
TerminalSettings.
Fixes#6776
Re-implements #10998
During startup we do not have real dimensions, so we have to guess what
our dimensions should be based off of the splits.
We'll augment the state of the pane search to also have a size in each
dimension that gets incrementally upgraded as we recurse through the
tree.
References #10978
If both of the following are true
1. alt+space is not explicitly unbound
2. alt+space is not bound to a command
Then the window procedure will handle the alt+space to open up the context menu.
In this case, we need to make sure we don't send the keys to terminal.
Closes#10935
## Summary of the Pull Request
Follow-up for #10886. The new UIA movement tests found some failing cases. This PR fixes UiaTextRangeBase to have movement match that of MS Word. In total, this fixes 64 tests.
## PR Checklist
* [X] Closes#10924
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
Root causes include...
1. if we were a non-degenerate range and we failed to move, we should still expand to enclose the unit
2. non-degenerate ranges are treated as if they already encompassed their given unit.
- this one is a bit difficult to explain. Consider these examples:
1. document movement
- state: you have a 1-cell wide range on the buffer, and you try to move by document
- result: move by 0 (there is no next/prev document), but the range now encompasses the entire document
2. line movement
- state: you have a 1-cell wide range on a line, and you try to move back by a line
- result: you go to the previous line (not the beginning of this line)
- conversely, a degenerate range successfully moves to the beginning/end of the current unit (i.e. document/line)
- this (bizarre) behavior was confirmed using MS Word
As a bonus, occasionally, Narrator would get stuck when navigating by line. This issue now seems to be fixed.
## Updates to existing tests
- `CanMoveByCharacter`
- `can't move backward from (0, 0)` --> misauthored, result should be one character wide.
- `can't move past the last column in the last row` --> misauthored and already covered in generated tests
- `CanMoveByLine`
- `can't move backward from top row` --> misauthored, end should be on next line. Already covered by generated tests
- `can't move forward from bottom row` --> misauthored, end should be on next line
- `can't move backward when part of the top row is in the range` --> misauthored, should expand
- `can't move forward when part of the bottom row is in the range` --> misauthored, degenerate range moves to end of buffer
- `MovementAtExclusiveEnd`
- populate the text buffer _before_ we do a move by word operation
- update to match the now fixed behavior
This PR converts the WSL distro generator to use the registry to lookup
WSL distros instead of trying to parse the results of `wsl.exe`.
`wsl.exe` sometimes takes a very long time to launch the WSL service,
which means that on the first launch of the Terminal, WSL distros can
sometimes be missing entirely!
## References
* Also related is #6160, but I feel that deserves a separate PR for
warning when the default profile is a dynamic profile who's source
indicated it was gone.
## PR Checklist
* [x] Closes#9905
* [x] Closes#7199
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is maybe a little BODGY, but hey we get tons of reports of this
root cause.
## Validation Steps Performed
Ran it locally, it did well. Ran a `wsl --shutdown`, then booted the
terminal - seemed to do well. I never was able to repro the slowness
myself, but I'd suspect this'll fix it.
## Summary of the Pull Request
Since the days immemorial of the Terminal, the TermControl has auto-focused itself when it finalizes its layout. This has led to the problem that `wt ; sp ; sp ; sp...` ends up focusing one of these panes at random.
This PR fixes this issue by getting rid of the auto-focusing. Panes now manually get focused when created. We manually focus the active pane when a commandline is dispatched. since we're internally tracking "active" separate from "focused", this ends up working as you'd hope.
## References
## PR Checklist
* [x] Closes#6586
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I also had to turn the cursor off by default. Most `TermControl`s would never get the `LostFocus` event, so their cursors would get left `On`, and that's not right.
## Validation Steps Performed
I've run the following things a bunch of times to make sure they work:
* `wtd sp ; sp ; sp`
* `wtd sp ; sp ; sp ; fp -t 0`
* `newTab`
* `splitPane`
* use the command palette to do the above as well
Where the result used to be random (cases 1 & 2), the result is exactly what you'd expect now.
It doesn't work at all for
```
wtd sp ; sp ; sp ; mf left
```
Presumably because we can't `move-focus` directionally during startup. However, that doesn't work _today_ either, so it's not making it worse. Just highlights that single scenario doesn't work right.
* Perform the handling of partial code points in the `u8u16` and `u16u8`
conversion functions without preparation in a preliminary buffer.
* Simplify partials handling in `u8u16` (perf).
* Declare the parameters for the incoming data as referenced
string_views.
* Simplify templatization.
* Simplify exception handling.
We complete the partial codepoint in the 4-bytes long cache and convert
it separately. This makes the cache ready for capturing the next
partials before the remaining string is converted. This way, we neither
need to copy the whole string into a buffer which contains complete
codepoints, nor do we need to allocate an unnecessarily long buffer
which exists for the life time of the state class instance.
Finding and capturing of partials is performed in a more linear code
using the evaluation of the length of a code point.
The parameters for the incoming data are now explicitely declared to be
referenced string_views.
`CATCH_RETURN` is used to improve the readability of the code.
## Validation Steps Performed
* manually tested
* unit tests passed
Closes#10946
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
Re-enables the delete button for generated profiles in the settings UI.
Additionally fixes "Startup Profiles" to only list active profiles.
Profiles are considered deleted if they're absent from settings.json, but their
GUID has been encountered before. Or in other words, from a user's perspective:
Generated profiles are added to the settings.json automatically only once.
Thus if the user chooses to delete the profile (e.g. using the delete button)
they aren't re-added automatically and thus appear to have been deleted.
Meanwhile those generated profiles are actually only marked as "hidden"
as well as "deleted", but still exist in internal profile lists.
The "hidden" attribute hides them from all existing menus. The "deleted" one
hides them from the settings UI and prevents them from being written to disk.
It would've been preferrable of course to just not generate and
add deleted profile to internal profile lists in the first place.
But this would've required far more wide-reaching changes.
The settings UI for instance requires a list of _all_ profiles in order to
allow a user to re-create previously deleted profiles. Such an approach was
attempted but discarded because of it's current complexity overhead.
## References
* Part of #9997
* A sequel to 5d36e5d
## PR Checklist
* [x] Closes#10960
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* "Startup Profiles" doesn't list deleted profiles ✔️
* Manually removing an item from settings.json removes the profile ✔️
* Removing cmd.exe and saving doesn't create empty objects (#10960) ✔️
* "Add a new profile" lists deleted profiles ✔️
* "Duplicate" recreates previously deleted profiles ✔️
* Profiles are always created with GUIDs ✔️
The original code for settings reload iterated the entire tree of panes
for every profile in the new settings (O(mn)) and constructed a
TerminalSettings object for every profile even if it later went unused.
This implementation:
1. Collects all new profiles keyed by guid
1.a. Adds the "defaults" profile to the map
2. Iterates every pane, just once, and updates its profile if it shows
up in the list by GUID.
I've merged all of the per-tab code into a single loop.
Because of 1.a., this code can now update panes that are hosting the
"base" profile.
Right now, we store GUIDs in panes and most of the functions for interacting
with profiles on the settings model take GUIDs and look up profiles.
This pull request changes how we store and look up profiles to prefer profile
objects. Panes store strong references to their originating profiles, which
simplifies settings lookup for CloseOnExit and the bell settings. In fact,
deleting a pane's profile no longer causes it to forget which CloseOnExit
setting applies to it. Duplicating a pane that is hosting a deleted profile
(#5047) now duplicates the profile, even though it is otherwise unreachable.
This makes the world more consistent and allows us to _eventually_ support panes
hosting profiles that do not have GUIDs that can be looked up in the profile
list. This is a gateway to #6776 and #10669, and consolidating the profile
lookup logic will help with #10952.
PR #10588 introduced TerminalSettings::CreateWithProfile and made
...CreateWithProfileByID a thin wrapper over top it, which looked up the profile
by GUID before proceeding. It has also been removed, as its last caller is gone.
Closes#5047
This supports a future world where we give commandline-only invocations
their own tabs. It was easier to promote the commandline to a title at
the time of argument parsing, rather than later, but I am happy to
change this if anyone disagrees.
Add support for acrylic in the titlebar
## PR Checklist
* [x] CLA signed
## Detailed Description of the Pull Request / Additional comments
This seems to be a highly requested feature and seeing as #5772 was closed I thought it made sense to make a PR for this.
## Validation Steps Performed
Checked that acrylic works in both dark and light modes and switching between them still works. Also checked that acrylic in the tab row still works when tabs in titlebar is disabled.
Currently, the monarch window will show itself when opening the tray icon context menu. This is because a window must be set as the foreground window when the context menu opens, otherwise the menu won't be able to be dismissed when clicking outside of the context menu.
This PR makes the tray icon create a non visible/interactable window for the sole purpose of being set as the foreground window when the tray icon's context menu is opened. Then none of the terminal windows should be set as the foreground window when opening the context menu.
Closes#10936
## Summary of the Pull Request
Pretty straightforward. Check if the scroll event is a horizontal movement. If it is, ignore it. We don't have a horizontal scrollbar.
## References
* obviously, revisit this if we ever do #1860
## PR Checklist
* [x] Closes#10329
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* scrolled ↑/↓ with slaptop trackpad: terminal scrolls.
* scrolled ←/→ with slaptop trackpad: terminal doesn't scroll.
* Scrolling _slightly more vertically than horizontally_ still scrolls.
* Scrolling _slightly more horizontally than vertically_ doesn't scroll.
When our text buffer is full, newlines cause the buffer to scroll underneath the viewport (rather than the viewport moving down). This was causing selections made during text output to scroll down. To solve this, when we increment the circular buffer, we decrement the y-coordinates of the current selections by 1. We also invalidate the previous selection rects.
Closes#10319
This commit moves us from MUX 2.5 to MUX 2.6. I have temporarily
disabled the new control styles in `TerminalApp\App.xaml` by setting
`ControlsResourcesVersion` to `Version1`. There is no significant expected
visual impact.
Closes#10508
This commit partially reverts d465a47 and introduces an alternative approach by adding Hash and Equals methods to the KeyChords class. Those methods will now favor any existing Vkeys over ScanCodes.
## PR Checklist
* [x] Closes#10933
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Added a new test, which is ✔️
* Various standard commands still work ✔️
* Hash() returns the same value for all KeyChords that are Equals() ✔️
Introduces a new methodology to maintain tests for UI Automation. This includes...
- `UiaTests.csv`: an excel spreadsheet designed to store UIA movement tests in a compact format
- `GeneratedTests.ps1`: a PowerShell script that imports `UiaTests.csv` and outputs a C++ TEST_METHOD for `UiaTextRangeTests.
This new system can be used to easily add more UIA movement tests.
Read https://github.com/microsoft/terminal/blob/dev/cazamor/a11y-7000/testing/tools/TestTableWriter/README.md for more details.
Follow-up work items:
- #10924 **Failing Tests**: this found some failing tests. We should make them not fail.
- #10925 **Missing Tests: Word navigation**: Word navigation is missing.
- #10926 **MoveEndpoint Tests**: an additional column can be added to the CSV "EndpointTarget", which can be "start", "end", or "both". This will allow us to test `MoveEndpoint` in addition to `Move`.
Some followups to #10368:
- Accidentally reverted a defapp change where the Monarch should not by default register itself as a handoff server.
- Destroy the tray icon if we're a monarch otherwise if we're a quake window we request the monarch to hide the icon.
When creating `startupAction` use `TabSwitcherMode::Disabled` in action args
to disable the tab switcher and prevent MRU logic to be applied.
Closes#10070
## Summary of the Pull Request
The bug was that Narrator would still read the content of the old tab/pane although a new tab/pane was introduced. This is caused by the automation peer not being created when XAML requests it. Normally, we would prevent the automation peer from being created if the terminal was not fully initialized.
This change allows the automation peer to be created regardless of the terminal being fully initialized by...
- `TermControl`: `_InitializeTerminal` updates the padding (dependent on the `SwapChainPanel`) upon full initialization
- `ControlCore`: initialize the `_renderer` in the ctor so that we can attach the UIA Engine before `ControlCore::Initialize()` is called (dependent on `SwapChainPanel` loading)
As a bonus, this also fixes a locking issue where logging would attempt to get the text range's text and lock twice. The locking fix is very similar to #10937.
## PR Checklist
Closes [MSFT 33353327](https://microsoft.visualstudio.com/OS/_workitems/edit/33353327)
## Validation Steps Performed
- New pane from key binding is announced by Narrator
- New tab from key binding is announced by Narrator
Adds new in-order traversal for MoveFocus and SwapPane actions.
Refactors the Pane methods to share a `NavigateDirection`
implementation.
Closes#10909
A large amount of the churn here is just renaming some of the things for
directional movement to reflect that it might not always be based on the
focused pane. `NextPane` and `PreviousPane` are the functions that
actually select the next/previous pane respectively and are the core
component of this PR.
VALIDATION
Created multiple panes on a tab, and tried both forward and backwards
movements with move-focus and swap-pane.
## Summary of the Pull Request
This adds a new setting `intenseTextStyle`. It's a per-appearance, control setting, defaulting to `"all"`.
* When set to `"all"` or `["bold", "bright"]`, then we'll render text as both **bold** and bright (1.10 behavior)
* When set to `"bold"`, `["bold"]`, we'll render text formatted with `^[[1m` as **bold**, but not bright
* When set to `"bright"`, `["bright"]`, we'll render text formatted with `^[[1m` as bright, but not bold. This is the pre 1.10 behavior
* When set to `"none"`, we won't do anything special for it at all.
## references
* I last did this in #10648. This time it's an enum, so we can add bright in the future. It's got positive wording this time.
* ~We will want to add `"bright"` as a value in the future, to disable the auto intense->bright conversion.~ I just did that now.
* #5682 is related
## PR Checklist
* [x] Closes#10576
* [x] I seriously don't think we have an issue for "disable intense is bright", but I'm not crazy, people wanted that, right? https://github.com/microsoft/terminal/issues/2916#issuecomment-544880423 was the closest
* [x] I work here
* [x] Tests added/passed
* [x] https://github.com/MicrosoftDocs/terminal/pull/381
## Validation Steps Performed
<!--  -->
Yea that works. Printed some bold text, toggled it on, the text was no longer bold. hooray.
### EDIT, 10 Aug
```json
"intenseTextStyle": "none",
"intenseTextStyle": "bold",
"intenseTextStyle": "bright",
"intenseTextStyle": "all",
"intenseTextStyle": ["bold", "bright"],
```
all work now. Repro script:
```sh
printf "\e[1m[bold]\e[m[normal]\e[34m[blue]\e[1m[bold blue]\e[m\n"
```
## Summary of the Pull Request
BODGY!
This solution was suggested in https://github.com/microsoft/microsoft-ui-xaml/issues/4554#issuecomment-887815332.
When the window moves, or when a ScrollViewer scrolls, dismiss any popups that are visible. This happens automagically when an app is a real XAML app, but it doesn't work for XAML Islands.
## References
* upstream at https://github.com/microsoft/microsoft-ui-xaml/issues/4554
## PR Checklist
* [x] Closes#9320
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Unfortunately, we've got a bunch of scroll viewers in our SUI. So I did something bodgyx2 to make our life a little easier.
`DismissAllPopups` can be used to dismiss all popups for a particular UI element. However, we've got a bunch of pages with scroll viewers that may or may not have popups in them. Rather than define the same exact body for all their `ViewChanging` events, the `HasScrollViewer` struct will just do it for you!
Inside the `HasScrollViewer` stuct, we can't get at the `XamlRoot()` that our subclass implements. I mean, _we_ can, but when XAML does it's codegen, _XAML_ won't be able to figure it out.
Fortunately for us, we don't need to! The sender is a UIElement, so we can just get _their_ `XamlRoot()`.
So, you can fix this for any SUI page with just a simple
```diff
- <ScrollViewer>
+ <ScrollViewer ViewChanging="ViewChanging">
```
```diff
- struct AddProfile : AddProfileT<AddProfile>
+ struct AddProfile : public HasScrollViewer<AddProfile>, AddProfileT<AddProfile>
```
## Validation Steps Performed
* the window doesn't close when you move it
* the popups _do_ close when you move the window
* the popups close when you scroll any SUI page
Let's say a user doesn't know that they need to write `"hidden": true` in
order to prevent a profile from showing up (and a settings UI doesn't exist).
Naturally they would open settings.json and try to remove the profile object.
This section of code recognizes if a profile was seen before and marks it as
`"hidden": true` by default and thus ensures the behavior the user expects:
Profiles won't show up again after they've been removed from settings.json.
## References
#8324 - Application State
## PR Checklist
* [x] Closes#8270
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* settings.json/state.json are created if they don't exist ✔️
* Removing any profile from settings.json doesn't cause it to appear again ✔️
* Hitting save in SUI creates profiles with `"hidden": true` ✔️
* Removing a default profile and hitting save in SUI works ❌
An empty object is added instead.
Fixes a bug where interacting with Windows Terminal when using Narrator causes Windows Terminal to hang.
`UiaTextRangeBase::Move()` locks, but later calls `UiaTextRangeBase::ExpandToEnclosingUnit()` which attempts to lock again. The workaround for this is to introduce a `_expandToEnclosingUnit()` that _does not_ lock the console. Then, `Move()` calls this new method, thus only allowing one lock to be established at a time.
This bug is observed to be in v1.11.2221.0 and _not_ in v1.9.1942.0.
A brief summary of the behavior of the tray icon:
- There will only ever be one tray icon representing all windows.
- Left-Click on a Tray Icon brings up the MRU window.
- Right-Click on a Tray Icon brings up a Context Menu:
```
Focus Terminal
----------------
Windows --> Window ID 1 - <unnamed window>
Named Window
Named Window Again
```
- Focus Terminal will bring up the MRU window.
- Clicking on any of the Window "names" in the submenu will summon the window.
## Settings Changes
Two new global settings are introduced: `alwaysShowTrayIcon` and `minimizeToTray`. Here's a chart explaining the behavior with the two settings.
| | `alwaysShowTrayIcon:true` | `alwaysShowTrayIcon:false` |
|----------------------|------------------------------------------------------------------|------------------------------------------------------------------|
| `minimizeToTray:true` | tray icon is always shown. minimize button will hide the window. | tray icon is always shown. minimize button will hide the window. |
| `minimizeToTray:false` | tray icon is always shown. | tray icon is not shown ever. |
Closes#5727
## References
[Spec for Minimize to Tray](https://github.com/microsoft/terminal/blob/main/doc/specs/%23653%20-%20Quake%20Mode/%23653%20-%20Quake%20Mode.md#minimize-to-tray)
Docs PR - MicrosoftDocs/terminal#352
#10448 - My list of TODOs
Improve WriteCharsLegacy performance by increasing LocalBuffer size, allowing
longer runs of characters to be submitted to the remaining parts of conhost.
References #10563 -- vtebench tracking issue
## Validation Steps Performed
* Ran `cat big.txt`, vtebench and termbench and
noted ~5% performance improvements
WriteUTF8FileAtomic overrides the content of the file "atomically"
by creating a temp file and then renaming it to the original path.
The problem arises when the original path is symbolic link,
as the link itself gets overridden by a file (rather than the link target).
This PR introduces a special handling of the symlinks:
if the path as a symlink we resolve the path and use:
1. target's directory to create a temp-file in
2. target itself to be replaced with the tempfile.
Symlink resolution is problematic when the target path does not exist,
as there is no good utility that resolves such link (canonical() fails).
In this corner case we skip the "atomic" approach of renaming the file
and write the link target directly.
Closes#10787
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add functionality to move a pane to another tab. If the tab index is greater than the number of current tabs a new tab will be created with the pane as its root. Similarly, if the last pane on a tab is moved to another tab, the original tab will be closed.
This is largely complete, but I know that I'm messing around with things that I am unfamiliar with, and would like to avoid footguns where possible.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4587
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7075
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Things done:
- Moving a pane to a new tab appears to work. Moving a pane to an existing tab mostly works. Moving a pane back to its original tab appears to work.
- Set up {Attach,Detach}Pane methods to add or remove a pane from a pane. Detach is slightly different than Close in that we want to persist the tree structure and terminal controls.
- Add `Detached` event on a pane that can be subscribed to to remove other event handlers if desired.
- Added simple WalkTree abstraction for one-off recursion use cases that calls a provided function on each pane in order (and optionally terminates early).
- Fixed an in-prod bug with closing panes. Specifically, if you have a tree (1; 2 3) and close the 1 pane, then 3 will lose its borders because of these lines clearing the border on both children https://github.com/microsoft/terminal/blob/main/src/cascadia/TerminalApp/Pane.cpp#L1197-L1201 .
To do:
- Right now I have `TerminalTab` as a friend class of `Pane` so I can access some extra properties in my `WalkTree` callbacks, but there is probably a better choice for the abstraction boundary.
Next Steps:
- In a future PR Drag & Drop handlers could be added that utilize the Attach/Detach infrastructure to provide a better UI.
- Similarly once this is working, it should be possible to convert an entire tab into a pane on an existing tab (Tab::DetachRoot on original tab followed by Tab::AttachPane on the target tab).
- Its been 10 years, I just really want to use concepts already.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing by creating pane(s), and moving them between tabs and creating new tabs and destroying tabs by moving the last remaining pane.
The quake mode keybinding is bound to a scancode. This made it
impossible to override it with a vkey-based one like "win+\`".
This commit fixes the issue by making sure that a `KeyChord` always has a vkey,
and leveraging this fact inside ActionMap, which now ignores the scan-code.
## PR Checklist
* [x] Closes#10875
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode and other keybinding still work ✔️
* Repro settings from #10875 work correctly ✔️
## Summary of the Pull Request
This isn't a fix for #10875, but it is logging that help identify the root cause here. The logging may additionally be helpful for some of the other issues we're seeing elsewhere in the repo, namely #10340.
@lhecker is actually working on the fix for #10875, so hopefully this test will help validate.
## References
* Regressed in #10666.
* logging for #8888
## PR Checklist
* [x] Closes nothing
* [x] I work here
* [x] Tests added, and they absolutely fail, but they're localtests, so ¯\\\_(ツ)_/¯
* [n/a] Requires documentation to be updated
## details
While I was here, I noticed that `KeyBindingsTests::KeyChords` has been broken for some time now. So I fixed that too.
My first approach to solve #10875 failed.
This PR contains the most useful change as a separate commit.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode keybinding works ✔️
* command palette still works ✔️
## Summary of the Pull Request
This was missed in #10051. We need to make sure that the UIA provider can immediately know about the padding in the control, not just after the settings reload.
## PR Checklist
* [x] Closes #9955.e
* [x] Additionally, this just closes#9955. The only remaining box in there never repro'd, so probably wasn't even root caused by #9820. I think we can close that issue for now, and reactivate if something else was broken.
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Checked before/after in Accessibility Insights. Before the row rectangles were the full width of the control initially. Now they're properly padded.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR implements/solves #7125. Concretely: two requests regarding alt+space were posted there:
1. Disabling the alt+space menu when the keychord explicitly unbound - and forwarding the keystroke to the terminal
2. Disabling the alt+space menu when the keychord is bound to an action
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Not that I know
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7125
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated. N/A
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
The issue was marked Help-Wanted. I am happy to change the implementation to better fit your (planned) architecture.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
While researching the solution, I noticed that the XAML system was always opening the system menu after Alt+Space, even when explicitly setting the event to be handled according to the documentation. The only solution I could find was to hook into the "XAML bypass" already in place for F7 KeyDown, and Alt KeyUp keystrokes. This bypass sends the keystroke to the AppHost immediately. This bypass method will "fall back" to the normal XAML routing when the keystroke is not handled.
The implemented behaviour is as follows:
- Default: same as normal; system menu is working since the bypass does not handle the keystroke
- Alt+Space explicitly unbound: bypass passes the keystroke to the terminal and marks it as handled
- Alt+Space bound to command: bypass invokes the command and marks it as handled
Concretely, added a method to the KeyBindings and ActionMap interfaces to check whether a keychord is explicitly unbound. The implementation for `_GetActionByKeyChordInternal` already distinguishes between explicitly unbound and lack of binding, however this distinction is not carried over to the public methods. I decided not to change this existing method, to avoid breaking other stuff and to make the API more explicit.
Furthermore, there were some checks against Alt+Space further down in the code, preventing this keystroke from being entered in the terminal. Since the check for this keystroke is now done at a "higher" level, I thought I could safely remove these checks as otherwise the keystroke could never be sent to the terminal itself. Please correct me if I'm wrong.
Note that when alt+space is bound to an action that opens the command pallette (such as tab search), then a second press of the key combination does still open the system menu. This is because at that point, the "bypass" is cancelled (called "not a good implementation" in #4031). I don't think this can easily be solved for now, but this is a very minor bug/inconvenience.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Added tests for the new method. Performed manual checking:
* [x] Default configuration still opens system menu like normal
* [x] Binding alt+space to an action performs the action and does not show the system menu
* [x] Explicitly unbinding alt+space no longer shows the system menu and sends the keystroke to the terminal. I was unable to run the debug tap (it crashed my instance - same thing happening on preview and release builds) to check for sure, but behaviour was identical to native linux terminals.
## Summary of the Pull Request
This PR causes the Terminal to combine taskbar states at the tab and window level, according to the [MSDN docs for `SetProgressState`](https://docs.microsoft.com/en-us/windows/win32/api/shobjidl_core/nf-shobjidl_core-itaskbarlist3-setprogressstate#how-the-taskbar-button-chooses-the-progress-indicator-for-a-group).
This allows the Terminal's taskbar icon to continue showing progress information, even if you're in a pane/tab that _doesn't_ have progress state. This is helpful for cases where the user may be running a build in one tab, and working on something else in another.
## References
* [`SetProgressState`](https://docs.microsoft.com/en-us/windows/win32/api/shobjidl_core/nf-shobjidl_core-itaskbarlist3-setprogressstate#how-the-taskbar-button-chooses-the-progress-indicator-for-a-group)
* Progress mega: #6700
## PR Checklist
* [x] Closes#10090
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This also fixes a related bug where transitioning from the "error" or "warning" state directly to the "indeterminate" state would cause the taskbar icon to get stuck in a bad state.
## Validation Steps Performed
<details>
<summary><code>progress.cmd</code></summary>
```cmd
@echo off
setlocal enabledelayedexpansion
set _type=3
if (%1) == () (
set _type=3
) else (
set _type=%1
)
if (%_type%) == (0) (
<NUL set /p =]9;4
echo Cleared progress
)
if (%_type%) == (1) (
<NUL set /p =]9;4;1;25
echo Started progress (normal, 25^)
)
if (%_type%) == (2) (
<NUL set /p =]9;4;2;50
echo Started progress (error, 50^)
)
if (%_type%) == (3) (
@rem start indeterminate progress in the taskbar
@rem this `<NUL set /p =` magic will output the text _without a newline_
<NUL set /p =]9;4;3
echo Started progress (indeterminate, {omitted})
)
if (%_type%) == (4) (
<NUL set /p =]9;4;4;75
echo Started progress (warning, 75^)
)
```
</details>
## Summary of the Pull Request
Apparently the exception handler in TerminalApi is far too talkative. We're apparently throwing in `TerminalApi::CursorLineFeed` way too often, and that's caused an internal bug to be filed on us.
This represents making the event less talkative, but doesn't actually fix the bug. It's just easier to get the OS bug cleared out quick this way.
## References
* MSFT:33310649
## PR Checklist
* [x] Fixes the **A** portion of #10882, which closes MSFT:33310649
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Turns out, we'd only ever use the non-client size to calculate the size of the window, but not the actual position. As we learned in #10676, the nonclient area extends a few pixels past the visible borders of the window.
## PR Checklist
* [x] Closes#10583
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* [x] Works with the `IslandWindow`
* [x] Works with the `NonClientIslandWindow`
## Summary of the Pull Request
Do not invoke terminal resize logic if view port dimensions didn't change
## PR Checklist
* [x] Closes#10857
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Short-circuit `ControlCore::_doResizeUnderLock` if the dimensions of the
required view port are equal to the dimensions of the current view port
#### ⚠️ targets #10051
## Summary of the Pull Request
This updates our `ThrottledFunc`s to take a dispatcher parameter. This means that we can use the `Windows::UI::Core::CoreDispatcher` in the `TermControl`, where there's always a `CoreDispatcher`, and use a `Windows::System::DispatcherQueue` in `ControlCore`/`ControlInteractivity`. When running in-proc, these are always the _same thing_. However, out-of-proc, the core needs a dispatcher queue that's not tied to a UI thread (because the content proces _doesn't have a UI thread!_).
This lets us get rid of the output event, because we don't need to bubble that event out to the `TermControl` to let it throttle that update anymore.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] This is a part of #1256
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Fortunately, `winrt::resume_foreground` works the same on both a `CoreDispatcher` and a `DispatcherQueue`, so this wasn't too hard!
## Validation Steps Performed
This was validated in `dev/migrie/oop/the-whole-thing` (or `dev/migrie/oop/connection-factory`, I forget which), and I made sure that it worked both in-proc and x-proc. Not only that, _it wasn't any slower_!This reverts commit 04b751faa7.
This PR adds conhost support for downloadable soft fonts - also known as
dynamically redefinable character sets (DRCS) - using the `DECDLD`
escape sequence.
These fonts are typically designed to work on a specific terminal model,
and each model tends to have a different character cell size. So in
order to support as many models as possible, the code attempts to detect
the original target size of the font, and then scale the glyphs to fit
our current cell size.
Once a font has been downloaded to the terminal, it can be designated in
the same way you would a standard character set, using an `SCS` escape
sequence. The identification string for the set is defined by the
`DECDLD` sequence. Internally we map the characters in this set to code
points `U+EF20` to `U+EF7F` in the Unicode private use are (PUA).
Then in the renderer, any characters in that range are split off into
separate runs, which get painted with a special font. The font itself is
dynamically generated as an in-memory resource, constructed from the
downloaded character bitmaps which have been scaled to the appropriate
size.
If no soft fonts are in use, then no mapping of the PUA code points will
take place, so this shouldn't interfere with anyone using those code
points for something else, as along as they aren't also trying to use
soft fonts. I also tried to pick a PUA range that hadn't already been
snatched up by Nerd Fonts, but if we do receive reports of a conflict,
it's easy enough to change.
## Validation Steps Performed
I added an adapter test that runs through a bunch of parameter
variations for the `DECDLD` sequence, to make sure we're correctly
detecting the font sizes for most of the known DEC terminal models.
I've also tested manually on a wide range of existing fonts, of varying
dimensions, and from multiple sources, and made sure they all worked
reasonably well.
Closes#9164
`VkKeyScanW` as well as `MapVirtualKeyW` are used throughout
the project, but are input method sensitive functions.
Since #10666 `win+sc(41)` is used as the quake mode keybinding,
which is then mapped to a virtual key in order to call `RegisterHotKey`.
This mapping is highly dependent on the input method and the quake mode
key binding will fail to work once the input method was changed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10729
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* win+` opens quake window before & after changing keyboard layout ✔️
* keyboard layout changes while WT is minimized trigger reloaded ✔️
- Monarch no longer sets itself up as a `CTerminalHandoff` multi instance server by default
- In fact, `CTerminalHandoff` will only ever be a single instance server
- When COM needs a `CTerminalHandoff`, it launches `wt.exe -embedding`, which gets picked up by the Monarch and then gets handed off to itself/peasant depending on user settings.
- Peasant now recognizes the `-embedding` commandline and will start a `CTerminalHandoff` single instance listener, and receives the connection into a new tab.
Closes#10358
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds the Split Tab option to the tab context menu.
Clicking this option will `auto` split the active pane of the tab into a duplicate pane.
Clicking on an unfocused tab and splitting it will bring that tab into focus and split its active pane.
We could make this a flyout from the context menu to let people choose horizontal/vertical split in the future if it's requested.
I'm also wondering if this should be called Split Pane instead of Split Tab?
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#1912
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5025
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
https://user-images.githubusercontent.com/48369326/127691919-aae4683a-212a-4525-a0eb-a61c877461ed.mp4
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
When switching from the alt buffer back to the main buffer, we need to copy certain cursor attributes from the one to the other. However, this copying was taking place after the alt buffer had been freed, and thus could result in the app crashing. This PR simply moves that code up a bit so it's prior to the buffer being freed.
## References
PR #10843 added the code that introduced this problem.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I was able to reproduce the crash when using a debug build, and confirmed that the crash no longer occurred after this PR was applied. I also checked that the cursor attributes were still being correctly copied back when returning from the alt buffer.
Move to 1ES engineering pools
## PR Checklist
* [x] Closes#10734
* [x] I work here
* [x] If the builds still work, the tests pass. (release and PR builds...)
## Validation Steps Performed
- [x] Run the builds associated with this PR
- [x] Force run a release build off this branch
- [x] Force run a PGO training build off this branch
Shortly before adding the SSE2 variant I "improved" it by using
`_mm_packs_epi32`, but failed to test it again afterwards.
## PR Checklist
* [x] Closes#10866
* [x] I work here
## Validation Steps Performed
* `printf "\e[mNORMAL \e[1mBOLD\n"` results in correct bold white glyphs ✔️
## Validation Steps Performed
Clicked around, validated that settings still behave the same (as far as
I can tell with my limited terminal configuration expertise)
Closes#10387
Fixes dragging and dropping drive letters onto the '+' button.
Manually tested - dragging and dropping the `C:\` drive onto the '+' button works when creating a new tab, splitting or creating a new window. Dragging and dropping a regular directory still works.
Closes#10723
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add the ability to toggle a pane's split direction
- Switch from horizontal to vertical split (and vice versa)
- Propogate new borders through to children.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#10665
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10665
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Ran terminal, created multiple panes in different orientations, ran command through command palate and verified that they displayed properly in the new orientation.
When the `SetContoleTitle` API is called with a title containing control
characters, we need to filter out those characters before we can forward
the title change over conpty as an escape sequence. If we don't do that,
the receiving terminal will end up executing the control characters
instead of updating the title. We were already filtering out the C0
control characters, but with this PR we're now filtering out C1 controls
characters as well.
I've simply updated the sanitizing routine in `DoSrvSetConsoleTitleW` to
filter our characters in the range `0x80` to `0x9F`. This is in addition
to the C0 range (`0x00` to `0x1F`) that was already excluded.
## Validation Steps Performed
I've added a conpty unit test that calls `DoSrvSetConsoleTitleW` with
titles containing a variety of C0 and C1 controls characters, and which
verifies that those characters are stripped from the title forwarded to
conpty.
I've also confirmed that the test case in issue #10312 is now working
correctly in Windows Terminal.
Closes#10312
The `_invalidMap` size is dependent on both `clientSize` as well
as `glyphCellSize` and must be resized when either changes.
## PR Checklist
* [x] Closes#10855
* [x] I work here
## Validation Steps Performed
* Changing font size with Ctrl+Mousewheel in fullscreen works ✔️
This commit introduces a hack to ConptyConnection for launching WSL.
When we detect that WSL is being launched (either "wsl" or "wsl.exe",
unqialified or _specifically_ from the current OS's System32 directory),
we will promote the startingDirectory specified at launch time into a
commandline argument.
Why do we want to switch to `--cd`?
With the current design of ConptyConnection and WSL, there are some
significant limitations:
* `startingDirectory` cannot be a WSL path, which forces users to
use weird tricks such as setting the starting directory to
`\\wsl$\Distro\home\user`.
* WSL occasionally fails to launch in time to handle a `\\wsl$` path,
which makes us spawn in a strange location (or no location at all).
(This fix will only address the second one until a WSL update is
released that adds support for `--cd $LINUX_PATH`.)
We will not do the promotion if any of the following are true:
* the commandline contains `--cd` already
* the commandline contains a bare `~`
* This was a commonly-used workaround that forced wsl to start in the
user's home directory. It conflicts with --cd.
* wsl is not spelled properly (`WSL` and `WSL.EXE` are unacceptable)
* an absolute path to wsl outside the system32 directory is provided
We chose the do this trick in the connection layer, the latest possible
point, because it captures the most use cases.
We could have done it earlier, but the options were quite limiting.
They are:
* Generate WSL profiles with startingDirectory set to the home folder
* We can't do this because we do not know the user's home folder
path.
* Generate WSL profiles with `--cd` in them.
* This only works for unmodified profiles.
* This only works for generated profiles.
* Users cannot override the commandline without breaking it.
* Users cannot specify a startingDirectory (!) since the one on the
commandline wins.
* Set a flag on generated WSL profiles to request this trick
* This only works for generated profiles. Users who create their own
WSL profiles couldn't set startingDirectory and have it work the
same.
Patching the commandline, hacky though it may be, seemed to be the most
compatible option. Eventually, we can even support `wt -d ~ wsl`!
## Validation Steps Performed
Manual validation for the following cases:
```c++
// MUST MANGLE
auto a01 = _tryMangleStartingDirectoryForWSL(LR"(wsl)", L"SENTINEL");
auto a02 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X)", L"SENTINEL");
auto a03 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X ~/bin/sh)", L"SENTINEL");
auto a04 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe)", L"SENTINEL");
auto a05 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X)", L"SENTINEL");
auto a06 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X ~/bin/sh)", L"SENTINEL");
auto a07 = _tryMangleStartingDirectoryForWSL(LR"("wsl")", L"SENTINEL");
auto a08 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe")", L"SENTINEL");
auto a09 = _tryMangleStartingDirectoryForWSL(LR"("wsl" -d X)", L"SENTINEL");
auto a10 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe" -d X)", L"SENTINEL");
auto a11 = _tryMangleStartingDirectoryForWSL(LR"("C:\Windows\system32\wsl.exe" -d X)", L"SENTINEL");
auto a12 = _tryMangleStartingDirectoryForWSL(LR"("C:\windows\system32\wsl" -d X)", L"SENTINEL");
auto a13 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~/bin)", L"SENTINEL");
// MUST NOT MANGLE
auto a14 = _tryMangleStartingDirectoryForWSL(LR"("C:\wsl.exe" -d X)", L"SENTINEL");
auto a15 = _tryMangleStartingDirectoryForWSL(LR"(C:\wsl.exe)", L"SENTINEL");
auto a16 = _tryMangleStartingDirectoryForWSL(LR"(wsl --cd C:\)", L"SENTINEL");
auto a17 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~)", L"SENTINEL");
auto a18 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~ -d Ubuntu)", L"SENTINEL");
```
We don't have anywhere to put TerminalConnection unit tests :|
Closes#592.
When switching to the alt buffer, the starting cursor position, style,
and visibility is meant to be inherited from the main buffer. Similarly,
when returning to the main buffer, any changes made to those attributes
should be copied back (with the exception of the cursor position, which
is restored to its original state). This PR makes sure we handle that
cursor state correctly.
At some point I'd like to move the cursor state out of the
`SCREEN_INFORMATION` class, which would make this inheritance problem a
non-issue. For now, though, I've just made it copy the state from the
main buffer when creating the alt buffer, and copy it back when
returning to the main buffer.
## Validation Steps Performed
I've added some unit tests to verify the cursor state is inherited
correctly when switching to the alt buffer and back again. I also had to
make a small change to one of the existing alt buffer test that relied
on the initial cursor position being at 0;0, which is no longer the
case.
I've verified that the test case in issue #3545 is now working
correctly. I've also confirmed that this fixes a problem in the
_notcurses_ demo, where the cursor was showing when it should have been
hidden.
Closes#3545
## Summary of the Pull Request
<kbd>win+shift+arrows</kbd> can be used to move windows to adjacent monitors. When that happens, we'll new re-calculate the size of the window for the new monitor.
## References
* megathread: #8888
## PR Checklist
* [x] Closes#10274
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
In `WM_WINDOWPOSCHANGING`, the OS says "hey, I'm about to do {something} to your window. You cool with that?". We handle that message by:
1. checking if the window was _moved_ as a part of this message
2. getting the monitor that the window will be moved onto
3. If that monitor is different than the monitor the window is currently on, then
* calculate how big the quake window should be on that monitor
* tell the OS that's where we'd like to be.
## Validation Steps Performed
* <kbd>win+shift+arrows</kbd> works right now
* normal quake summoning still works right
I was watching a video about vectorized instructions and I wanted to
try out some new things, as I had never written AVX code before.
This commit is the result of this tiny Thursday morning detour into
AVX land. It improves performance of `TextColor::GetColor` by about 3x.
## Validation Steps Performed
* Default colors are still properly shifted +8 ✔️
Sets the tooltip text on the '+' button based on the keyboard modifiers
when dragging and dropping.
## Validation Steps Performed
Manually tested - dragged a directory onto the '+ button and saw that
* The text changed when `shift` was pressed
* The text changed when `alt` was pressed
* The text changed back when `shift` or `alt` were released
Closes#10722
## Summary of the Pull Request
This fixes two bugs related to dragging into the bounds of the `TermControl`. Although the fixes are fairly small, I'm batching them up, because I don't want to stack 2 more PRs on top of #10051.
* #9109
- This is fixed by only starting an autoscroll if the click&drag actually started within the bounds of the control.
* #4603
- Building on the above change, only modify the selection when the drag started in the control.
## References
* srsly go read #10051.
## PR Checklist
* [x] Closes#9109
* [x] Closes#4603
* [x] I work here
* [x] Test added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is kind of annoying that the auto-scrolling is handled by the TermControl, but it uses a timer that's still a WinUI construct.
We only want to start the auto-scrolling behavior when the drag started _inside_ the control. Otherwise, in the tab drag scenario, dragging into the bounds of the TermControl will trick it into thinking it should start a scroll.
## Summary of the Pull Request
When we're restoring from fullscreen, we do a little adjustment to make sure to clamp the window bounds within the bounds of the active monitor. We unfortunately didn't account for the size of the non-client area (the invisible borders around our 1px border). This didn't matter most of the time, but if the window was within ~8px of the side of the monitor (any side), then restoring from fullscreen would actually move it to the wrong place.
As it turns out, the `_quake` window is within ~8px of the edges of the monitor _very often_.
## References
* regressed in #9737
## PR Checklist
* [x] Closes#10199
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
The repro in the bug was fairly straightforward. It doesn't happen anymore.
For inexplicable reasons, the top row of pixels on our tabs, new tab
button, and caption buttons is totally unclickable. The mouse simply
refuses to interact with them. So when we're maximized, on certain
monitor configurations, this results in the top row of pixels not
reacting to clicks at all.
To obey Fitt's Law, we're gonna hackily shift the entire island up one
pixel. That will result in the top row of pixels in the window actually
being the _second_ row of pixels for those buttons, which will make them
clickable. It's perhaps not the right fix, but it works.
After discussion, we think this is a fine fix for this. We don't think
anyone's going to miss the top row of pixels on the TabView. The original
bug is painful enough for the subset of users it impacts that this is an
acceptable trade. Should a better fix be found, we can absolutely do that
instead.
Closes#7422
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Implementation of #6219 with a small tweak, not just passing the keys when no panes are present, but passing on the keys when there is no other pane to move to. This enables another usecase: 2 panes in terminal split vertically; in one of these panes running tmux with two panes that are split horizontally. This allows the user to still navigate between tmux panes even though they have terminal panes open.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Not that I know of
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6219
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated. I don't think that's necessary
* [x] Schema updated. N/A
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Implementation by propagating the boolean indicating success of moving focus all the way to the action handler, where this result will determine whether the action will be considered handled or not. When the action is not handled, the keychord will be propagated to the terminal.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing; all relevant unit tests still work
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes/implements #10058 according to directions in that issue: added support for browser navigation keys to be used in actions.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10058
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated: . If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: https://github.com/MicrosoftDocs/terminal/pull/371
* [x] Schema updated.
* [x] I've discussed this with core contributors already. According to instructions in #10058
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The mouse back/forward keys do not correspond to the keys added here. That would be a nice (but more complicated) addition, I'll add an issue for it.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
The `+=` operator is an extremely hot path under heavily output load. This PR aims to optimize its speed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Supports #10563
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
2021-07-27 15:09:56 +00:00
571 changed files with 30183 additions and 13125 deletions
[allow/*.txt](allow/) | Add words to the dictionary | one word per line (only letters and `'`s allowed) | [allow](https://github.com/check-spelling/check-spelling/wiki/Configuration#allow)
[reject.txt](reject.txt) | Remove words from the dictionary (after allow) | grep pattern matching whole dictionary words | [reject](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-reject)
[patterns/*.txt](patterns/) | Patterns to ignore from checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
[candidate.patterns](candidate.patterns) | Patterns that might be worth adding to [patterns.txt](patterns.txt) | perl regular expression with optional comment block introductions (all matches will be suggested) | [candidates](https://github.com/check-spelling/check-spelling/wiki/Feature:-Suggest-patterns)
[line_forbidden.patterns](line_forbidden.patterns) | Patterns to flag in checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
[expect/*.txt](expect.txt) | Expected words that aren't in the dictionary | one word per line (sorted, alphabetically) | [expect](https://github.com/check-spelling/check-spelling/wiki/Configuration#expect)
[advice.md](advice.md) | Supplement for GitHub comment when unrecognized words are found | GitHub Markdown | [advice](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice)
Note: you can replace any of these files with a directory by the same name (minus the suffix)
and then include multiple files inside that directory (with that suffix) to merge multiple files together.
<!-- See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice --> <!-- markdownlint-disable MD033 MD041 -->
<details>
<summary>
:pencil2: Contributor please read this
@@ -6,7 +6,7 @@
By default the command suggestion will generate a file named based on your commit. That's generally ok as long as you add the file to your commit. Someone can reorganize it later.
:warning: The command is written for posix shells. You can copy the contents of each `perl` command excluding the outer `'` marks and dropping any `'"`/`"'` quotation mark pairs into a file and then run `perl file.pl` from the root of the repository to run the code. Alternatively, you can manually insert the items...
:warning: The command is written for posix shells. If it doesn't work for you, you can manually _add_ (one word per line) / _remove_ items to `expect.txt` and the `excludes.txt` files.
If the listed items are:
@@ -20,31 +20,29 @@ See the `README.md` in each directory for more information.
:microscope: You can test your commits **without***appending* to a PR by creating a new branch with that extra change and pushing it to your fork. The [check-spelling](https://github.com/marketplace/actions/check-spelling) action will run in response to your **push** -- it doesn't require an open pull request. By using such a branch, you can limit the number of typos your peers see you make. :wink:
<details><summary>:clamp: If you see a bunch of garbage</summary>
If it relates to a ...
<details><summary>well-formed pattern</summary>
<details><summary>If the flagged items are :exploding_head: false positives</summary>
See if there's a [pattern](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns) that would match it.
If items relate to a ...
* binary file (or some other file you wouldn't want to check at all).
If not, try writing one and adding it to a `patterns/{file}.txt`.
Please add a file path to the `excludes.txt` file matching the containing file.
Patterns are Perl 5 Regular Expressions - you can [test](
https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your lines.
Note that patterns can't match multiline strings.
</details>
<details><summary>binary-ish string</summary>
Please add a file path to the `excludes.txt` file instead of just accepting the garbage.
File paths are Perl 5 Regular Expressions - you can [test](
File paths are Perl 5 Regular Expressions - you can [test](
https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your files.
`^` refers to the file's path from the root of the repository, so `^README\.md$` would exclude [README.md](
`^` refers to the file's path from the root of the repository, so `^README\.md$` would exclude [README.md](
../tree/HEAD/README.md) (on whichever branch you're using).
</details>
* well-formed pattern.
If you can write a [pattern](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples:-patterns) that would match it,
try adding it to the `patterns.txt` file.
Patterns are Perl 5 Regular Expressions - you can [test](
https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your lines.
# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
@@ -125,7 +125,7 @@ Team members will be happy to help review specs and guide them to completion.
### Help Wanted
Once the team have approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help%20Wanted).
Once the team has approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help%20Wanted).
<!-- Mandatory. Major version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Mandatory. Minor version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Mandatory, defaults to 0. Patch version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Optional, defaults to empty. Prerelease version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Copying the PGO runtime brings along a CRT. If we do that under normal circumstances, WAPPROJ will get its grubby hands on it and mess up all the CRT shenanigans we have to pull to make MSIX packages happy. So only pull it in for Instrument builds.-->
@@ -189,7 +189,7 @@ I think there might be a bit of a misunderstanding here - there are two differen
* shell applications, like `cmd.exe`, `powershell`, `zsh`, etc. These are text-only applications that emit streams of characters. They don't care at all about how they're eventually rendered to the user. These are also sometimes referred to as "commandline client" applications.
* terminal applications, like the Windows Terminal, gnome-terminal, xterm, iterm2, hyper. These are graphical applications that can be used to render the output of commandline clients.
On Windows, if you just run `cmd.exe` directly, the OS will create an instance of `conhost.exe` as the _terminal_ for `cmd.exe`. The same thing happens for `powershell.exe`, the system will creates a new conhost window for any client that's not already connected to a terminal of some sort. This has lead to an enormous amount of confusion for people thinking that a conhost window is actually a "`cmd` window". `cmd` can't have a window, it's just a commandline application. Its window is always some other terminal.
On Windows, if you just run `cmd.exe` directly, the OS will create an instance of `conhost.exe` as the _terminal_ for `cmd.exe`. The same thing happens for `powershell.exe`, the system will create a new conhost window for any client that's not already connected to a terminal of some sort. This has lead to an enormous amount of confusion for people thinking that a conhost window is actually a "`cmd` window". `cmd` can't have a window, it's just a commandline application. Its window is always some other terminal.
Any terminal can run any commandline client application. So you can use the Windows Terminal to run whatever shell you want. I use mine for both `cmd` and `powershell`, and also WSL:
After, go to Tools > Options > Text Editor > C++ > Formatting and checking "Use custom clang-format.exe file" in Visual Studio and choose the clang-format.exe in the repository at /packages/clang-format.win-x86.10.0.0/tools/clang-format.exe by clicking "browse" right under the check box.
After, go to Tools > Options > Text Editor > C++ > Formatting and check "Use custom clang-format.exe file" in Visual Studio and choose the clang-format.exe in the repository at /packages/clang-format.win-x86.10.0.0/tools/clang-format.exe by clicking "browse" right under the check box.
[The Old New Thing: How can I launch an unelevated process from my elevated process, redux]: https://devblogs.microsoft.com/oldnewthing/20190425-00/?p=102443
We need to represent actions inside the settings UI. This spec goes through the possible use cases and reasoning for including specific features for actions inside the settings UI.
## Background
### Inspiration
It would be ideal if we could get the settings UI to have parity with the JSON file. This will take some design work if we want every feature possible in relation to actions. There is also the option of not having parity with the JSON file in order to present a simpler UX.
### User Stories
All of these features are possible with the JSON file. This spec will go into discussion of which (possibly all) of these user stories need to be handled by the settings UI.
- Add key bindings to an action that does not already have keys assigned
- Edit key bindings for an action
- Remove key bindings from an action
- Add multiple key bindings for the same action
- Create an iterable action
- Create a nested action
- Choose which actions appear inside the command palette
- See all possible actions, regardless of keys
Commands with properties:
- sendInput has "input"
- closeOtherTabs has "index"
- closeTabsAfter has "index"
- renameTab has "title"*
- setTabColor has "color"*
- newWindow has "commandline", "startingDirectory", "tabTitle", "index", "profile"
Majority of these commands listed above are intended for the command palette, so they wouldn't make much sense with keys assigned to them anyway.
### Future Considerations
One day we'll have actions that can be invoked by items in the dropdown menu. This setting will have to live somewhere. Also, once we get a status bar, people may want to invoke actions from there.
## Solution Design
### Proposal 1: Keyboard and Command Palette pages
Implement a Keyboard page in place of the Actions page. Also plan for a Command Palette page in the future if it's something that's heavily requested. The Command Palette page would cover the missing use cases listed below.
When users want to add a new key binding, the dropdown will list every action, regardless if it already has keys assigned. This page should show every key binding assigned to an action, even if there are multiple bindings to the same action.
Users will be able to view every possible action from the command palette if they'd like.
Use cases covered:
- Add key bindings to an action that does not already have keys assigned
- Edit key bindings for an action
- Remove key bindings from an action
- Add multiple key bindings for the same action
- See all actions that have keys assigned
Use cases missing:
- Create an iterable action
- Create a nested action
- Choose which actions appear inside the command palette
- See all possible actions, regardless of keys
* **Pros**:
- This allows people to edit their actions in most of their scenarios.
- This gives us some wiggle room to cover majority of the use cases we need and seeing if people want the other use cases that are missing.
* **Cons**:
- Unfortunately we couldn't cover every single use case with this design.
- You can't edit the properties that are on some commands, however the default commands from the command palette include options with properties anyway. For example "decrease font size" has the `delta` property already included.
### Proposal 2: Have everything on one Actions page
Implement an Actions page that allows you to create actions designed for the command palette as well as actions with keys.
Use cases covered:
- Add key bindings to an action that does not already have keys assigned
- Edit key bindings for an action
- Remove key bindings from an action
- Add multiple key bindings for the same action
- See all actions that have keys assigned
- Create an iterable action
- Create a nested action
- Choose which actions appear inside the command palette
- See all possible actions, regardless of keys
I could not come up with a UX design that wasn't too complicated or confusing for this scenario.
**Pros**:
- There is full parity with the JSON file.
**Cons**:
- Could not come up with a simplistic design to represent all of the use cases (which makes the settings UI not as enticing since it promotes ease of use).
## Conclusion
We considered Proposal 2, however the design became cluttered very quickly and we agreed to create two pages and start off with Proposal 1.
## UI/UX Design
The Add new button is using the secondary color, to align with the button on the Color schemes page.
## Potential Issues
This design is not 1:1 with the JSON file, so actions that don't have keys will not appear on this page. Additionally, you can't add a new action without keys with this current design.
You also cannot specify properties on commands (like the `newTab` command) and these will have to be added through the JSON file. Considering there are only a few of these and we're planning to iterate on this and add a Command Palette page, we were okay with this decision.
This spec describes a new set of non-configurable keybindings that allows the user to update a selection without the use of a mouse or stylus.
## Inspiration
ConHost allows the user to modify a selection using the keyboard. Holding `Shift` allows the user to move the second selection endpoint in accordance with the arrow keys. The selection endpoint updates by one cell per key event, allowing the user to refine the selected region.
Mark mode allows the user to create a selection using only the keyboard, then edit it as mentioned above.
## Solution Design
The fundamental solution design for keyboard selection is that the responsibilities between the Terminal Control and Terminal Core must be very distinct. The Terminal Control is responsible for handling user interaction and directing the Terminal Core to update the selection. The Terminal Core will need to update the selection according to the preferences of the Terminal Control.
Relatively recently, TerminalControl was split into `TerminalControl`, `ControlInteractivity`, and `ControlCore`. Changes made to `ControlInteractivity`, `ControlCore`, and below propagate functionality to all consumers, meaning that the WPF terminal would benefit from these changes with no additional work required.
### Fundamental Terminal Control Changes
`ControlCore::TrySendKeyEvent()` is responsible for handling the key events after key bindings are dealt with in `TermControl`. At the time of writing this spec, there are 2 cases handled in this order:
- Clear the selection (except in a few key scenarios)
- Send Key Event
The first branch will be updated to _modify_ the selection instead of usually _clearing_ it. This will happen by converting the key event into parameters to forward to `TerminalCore`, which then updates the selection appropriately.
#### Idea: Make keyboard selection a collection of standard keybindings
One idea is to introduce an `updateSelection` action that conditionally works if a selection is active (similar to the `copy` action). For these key bindings, if there is no selection, the key events are forwarded to the application.
Thanks to Keybinding Args, there would only be 1 new command:
| Action | Keybinding Args | Description |
|--|--|--|
| `updateSelection` | | If a selection exists, moves the last selection endpoint. |
| | `Enum direction { up, down, left, right }` | The direction the selection will be moved in. |
| | `Enum mode { char, word, view, buffer }` | The context for which to move the selection endpoint to. (defaults to `char`) |
By default, the following keybindings will be set:
These are in accordance with ConHost's keyboard selection model.
This idea was abandoned due to several reasons:
1. Keyboard selection should be a standard way to interact with a terminal across all consumers (i.e. WPF control, etc.)
2. There isn't really another set of key bindings that makes sense for this. We already hardcoded <kbd>ESC</kbd> as a way to clear the selection. This is just an extension of that.
3. Adding 12 conditionally effective key bindings takes the spot of 12 potential non-conditional key bindings. It would be nice if a different key binding could be set when the selection is not active, but that makes the settings design much more complicated.
4. 12 new items in the command palette is also pretty excessive.
5. If proven wrong when this is in WT Preview, we can revisit this and make them customizable then. It's better to add the ability to customize it later than take it away.
#### Idea: Make keyboard selection a simulation of mouse selection
It may seem that some effort can be saved by making the keyboard selection act as a simulation of mouse selection. There is a union of mouse and keyboard activity that can be represented in a single set of selection motion interfaces that are commanded by the TermControl's Mouse/Keyboard handler and adapted into appropriate motions in the Terminal Core.
However, the mouse handler operates by translating a pixel coordinate on the screen to a text buffer coordinate. This would have to be rewritten and the approach was deemed unworthy.
### Fundamental Terminal Core Changes
The Terminal Core will need to expose a `UpdateSelection()` function that is called by the keybinding handler. The following parameters will need to be passed in:
-`enum SelectionDirection`: the direction that the selection endpoint will attempt to move to. Possible values include `Up`, `Down`, `Left`, and `Right`.
-`enum SelectionExpansion`: the selection expansion mode that the selection endpoint will adhere to. Possible values include `Char`, `Word`, `View`, `Buffer`.
#### Moving by Cell
For `SelectionExpansion = Char`, the selection endpoint will be updated according to the buffer's output pattern. For **horizontal movements**, the selection endpoint will attempt to move left or right. If a viewport boundary is hit, the endpoint will wrap appropriately (i.e.: hitting the left boundary moves it to the last cell of the line above it).
For **vertical movements**, the selection endpoint will attempt to move up or down. If a **viewport boundary** is hit and there is a scroll buffer, the endpoint will move and scroll accordingly by a line.
If a **buffer boundary** is hit, the endpoint will not move. In this case, however, the event will still be considered handled.
**NOTE**: An important thing to handle properly in all cases is wide glyphs. The user should not be allowed to select a portion of a wide glyph; it should be all or none of it. When calling `_ExpandWideGlyphSelection` functions, the result must be saved to the endpoint.
#### Moving by Word
For `SelectionExpansion = Word`, the selection endpoint will also be updated according to the buffer's output pattern, as above. However, the selection will be updated in accordance with "chunk selection" (performing a double-click and dragging the mouse to expand the selection). For **horizontal movements**, the selection endpoint will be updated according to the `_ExpandDoubleClickSelection` functions. The result must be saved to the endpoint. As before, if a boundary is hit, the endpoint will wrap appropriately. See [Future Considerations](#FutureConsiderations) for how this will interact with line wrapping.
For **vertical movements**, the movement is a little more complicated than before. The selection will still respond to buffer and viewport boundaries as before. If the user is trying to move up, the selection endpoint will attempt to move up by one line, then selection will be expanded leftwards. Alternatively, if the user is trying to move down, the selection endpoint will attempt to move down by one line, then the selection will be expanded rightwards.
#### Moving by Viewport
For `SelectionExpansion = View`, the selection endpoint will be updated according to the viewport's height. Horizontal movements will be updated according to the viewport's width, thus resulting in the endpoint being moved to the left/right boundary of the viewport.
#### Moving by Buffer
For `SelectionExpansion = Buffer`, the selection endpoint will be moved to the beginning or end of all the text within the buffer. If moving up or left, set the position to 0,0 (the origin of the buffer). If moving down or right, set the position to the last character in the buffer.
**NOTE**: In all cases, horizontal movements attempting to move past the left/right viewport boundaries result in a wrap. Vertical movements attempting to move past the top/bottom viewport boundaries will scroll such that the selection is at the edge of the screen. Vertical movements attempting to move past the top/bottom buffer boundaries will be clamped to be within buffer boundaries.
Every combination of the `SelectionDirection` and `SelectionExpansion` will map to a keybinding. These pairings are shown below in the UI/UX Design --> Keybindings section.
**NOTE**: If `copyOnSelect` is enabled, we need to make sure we **DO NOT** update the clipboard on every change in selection. The user must explicitly choose to copy the selected text from the buffer.
## UI/UX Design
### Key Bindings
There will only be 1 new command that needs to be added:
| Action | Keybinding Args | Description |
|--|--|--|
| `selectAll` | | Select the entire text buffer.
By default, the following key binding will be set:
```JS
{"command":"selectAll","keys":"ctrl+shift+a"},
```
## Capabilities
### Accessibility
Using the keyboard is generally a more accessible experience than using the mouse. Being able to modify a selection by using the keyboard is a good first step towards making selecting text more accessible.
### Security
N/A
### Reliability
With regards to the Terminal Core, the newly introduced code should rely on already existing and tested code. Thus no crash-related bugs are expected.
With regards to Terminal Control and the settings model, crash-related bugs are not expected. However, ensuring that the selection is updated and cleared in general use-case scenarios must be ensured.
### Compatibility
N/A
### Performance, Power, and Efficiency
## Potential Issues
### Grapheme Clusters
When grapheme cluster support is inevitably added to the Text Buffer, moving by "cell" is expected to move by "character" or "cluster". This is similar to how wide glyphs are handled today. Either all of it is selected, or none of it.
## Future considerations
### Word Selection Wrap
At the time of writing this spec, expanding or moving by word is interrupted by the beginning or end of the line, regardless of the wrap flag being set. In the future, selection and the accessibility models will respect the wrap flag on the text buffer.
## Mark Mode
This functionality will be expanded to create a feature similar to Mark Mode. This will allow a user to create a selection using only the keyboard.
@@ -29,8 +29,8 @@ Below is the schedule for when milestones will be included in release builds of
| 2021-03-01 | [1.7] in Windows Terminal Preview<br>[1.6] in Windows Terminal | [Windows Terminal Preview 1.7 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-7-release/) |
| 2021-04-14 | [1.8] in Windows Terminal Preview<br>[1.7] in Windows Terminal | [Windows Terminal Preview 1.8 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-8-release/) |
| 2021-05-31 | [1.9] in Windows Terminal Preview<br>[1.8] in Windows Terminal | [Windows Terminal Preview 1.9 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-9-release/) |
| 2021-07-31 | 1.10 in Windows Terminal Preview<br>[1.9] in Windows Terminal | |
| 2021-08-30 | 1.11 in Windows Terminal Preview<br>1.10 in Windows Terminal | |
| 2021-07-14 | [1.10] in Windows Terminal Preview<br>[1.9] in Windows Terminal | [Windows Terminal Preview 1.10 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-10-release/) |
| 2021-08-31 | [1.11] in Windows Terminal Preview<br>[1.10] in Windows Terminal | [Windows Terminal Preview 1.11 Release](https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-11-release/) |
| 2021-10-31 | 1.12 in Windows Terminal Preview<br>1.11 in Windows Terminal | |
| 2021-11-30 | 2.0 RC in Windows Terminal Preview<br>2.0 RC in Windows Terminal | |
| 2021-12-31 | [2.0] in Windows Terminal Preview<br>[2.0] in Windows Terminal | |
@@ -4,7 +4,7 @@ This was originally imported by @Austin-Lamb in December 2020.
The provenance information (where it came from and which commit) is stored in the file `cgmanifest.json` in the same directory as this readme.
Please update the provenance information in that file when ingesting an updated version of the dependent library.
That provenance file is automatically read and inventoried by Microsoft systems to ensure compliance with appropiate governance standards.
That provenance file is automatically read and inventoried by Microsoft systems to ensure compliance with appropriate governance standards.
## What should be done to update this in the future?
@@ -12,4 +12,4 @@ That provenance file is automatically read and inventoried by Microsoft systems
2. Take the parts you want, but leave most of it behind since it's HUGE and will bloat the repo to take it all. At the time of this writing, we only use small_vector.hpp and its dependencies as a header-only library.
3. Validate that the license in the root of the repository didn't change and update it if so. It is sitting in a version-specific subdirectory below this readme.
If it changed dramatically, ensure that it is still compatible with our license scheme. Also update the NOTICE file in the root of our repository to declare the third-party usage.
<ErrorText>This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
<ErrorText>This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
<ErrorText>This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
<ErrorText>This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
<ErrorText>This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is {0}.</ErrorText>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
