Merge remote-tracking branch 'openconsole/inbox' into release-1.19

There's an apparent miscompilation of `dynamic_bitset` on x86 with
MSVC 19.38, where the following code:
```cpp
dynamic_bitset<uint64_t> bits(80 * 24, 0);
bits.set(0, 3 * 80, true);
```

is expected to set the first 3.75 blocks to 1 which should produce
the following blocks:
```
0xffffffffffffffff
0xffffffffffffffff
0xffffffffffffffff
0x0000ffffffffffff
```

but it actually produces:
```
0xffffffffffffffff
0x00000000ffffffff
0xffffffffffffffff
0x0000ffffffffffff
```

The weird thing here is that this only happens if `til::bitmap`
uses a `dynamic_bitset<uint64_t>`. As soon as it uses `<uint32_t>`
any other instantiation of `<uint64_t>` is magically fixed.

Conclusion: Use `size_t` until we know what's going on.
Last known good CL version: 14.37.32822
Current broken CL version: 14.38.33130

## Validation Steps Performed

The following test completes successfully again:
```cpp
til::bitmap map{ { 80, 24 } };
map.translate({ 0, 3 }, true);
VERIFY_ARE_EQUAL(3u, map.runs().size());
```

(cherry picked from commit d3ec47a7fc)
Service-Card-Id: 91885583
Service-Version: 1.19

.github/actions/spelling/allow/allow.txt

@@ -14,8 +14,8 @@ changelog
 clickable
 clig
 CMMI
-consvc
 copyable
+Counterintuitively
 CtrlDToClose
 cybersecurity
 dalet
@@ -99,6 +99,7 @@ slnt
 Sos
 ssh
 stakeholders
+sxn
 timeline
 timelines
 timestamped
@@ -115,6 +116,8 @@ und
 unregister
 versioned
 vsdevcmd
+walkthrough
+walkthroughs
 We'd
 westus
 wildcards

.github/actions/spelling/allow/apis.txt

@@ -28,8 +28,9 @@ CYICON
 Dacl
 dataobject
 dcomp
-DERR
+debugbreak
 delayimp
+DERR
 dlldata
 DNE
 DONTADDTORECENT
@@ -52,6 +53,7 @@ futex
 GETDESKWALLPAPER
 GETHIGHCONTRAST
 GETMOUSEHOVERTIME
+GETTEXTLENGTH
 Hashtable
 HIGHCONTRASTON
 HIGHCONTRASTW
@@ -88,6 +90,7 @@ IObject
 iosfwd
 IPackage
 IPeasant
+isa
 ISetup
 isspace
 IStorage
@@ -109,12 +112,14 @@ lsass
 LSHIFT
 LTGRAY
 MAINWINDOW
+MAXIMIZEBOX
 memchr
 memicmp
 MENUCOMMAND
 MENUDATA
 MENUINFO
 MENUITEMINFOW
+MINIMIZEBOX
 mmeapi
 MOUSELEAVE
 mov
@@ -183,6 +188,7 @@ snprintf
 spsc
 sregex
 SRWLOC
+srwlock
 SRWLOCK
 STDCPP
 STDMETHOD
@@ -199,6 +205,7 @@ TABROW
 TASKBARCREATED
 TBPF
 THEMECHANGED
+THICKFRAME
 tlg
 TME
 tmp
@@ -220,6 +227,7 @@ Vcpp
 Viewbox
 virtualalloc
 vsnwprintf
+wcsnlen
 wcsstr
 wcstoui
 WDJ

.github/actions/spelling/allow/microsoft.txt

@@ -4,6 +4,7 @@ advapi
 altform
 altforms
 appendwttlogging
+appinstaller
 appx
 appxbundle
 appxerror
@@ -59,12 +60,13 @@ PRIINFO
 propkey
 pscustomobject
 QWORD
+rdpclip
 regedit
 resfiles
 robocopy
 SACLs
-segoe
 sdkddkver
+segoe
 Shobjidl
 sid
 Skype

.github/actions/spelling/allow/names.txt

@@ -54,6 +54,7 @@ mikegr
 mikemaccana
 miloush
 miniksa
+nguyen
 niksa
 nvaccess
 nvda

.github/actions/spelling/candidate.patterns

@@ -371,8 +371,6 @@ ipfs://[0-9a-z]*
 \b(?:[0-9a-fA-F]{0,4}:){3,7}[0-9a-fA-F]{0,4}\b
 # c99 hex digits (not the full format, just one I've seen)
 0x[0-9a-fA-F](?:\.[0-9a-fA-F]*|)[pP]
-# Punycode
-\bxn--[-0-9a-z]+
 # sha
 sha\d+:[0-9]*[a-f]{3,}[0-9a-f]*
 # sha-... -- uses a fancy capture

.github/actions/spelling/excludes.txt

@@ -106,6 +106,7 @@
 ^src/terminal/parser/ft_fuzzwrapper/run\.bat$
 ^src/terminal/parser/ut_parser/Base64Test.cpp$
 ^src/terminal/parser/ut_parser/run\.bat$
+^src/tools/benchcat
 ^src/tools/integrity/packageuwp/ConsoleUWP\.appxSources$
 ^src/tools/lnkd/lnkd\.bat$
 ^src/tools/pixels/pixels\.bat$

.github/actions/spelling/expect/alphabet.txt

@@ -21,6 +21,7 @@ BBBBCCCCC
 BBGGRR
 efg
 EFG
+efgh
 EFGh
 KLMNOQQQQQQQQQQ
 QQQQQQQQQQABCDEFGHIJ

.github/actions/spelling/expect/expect.txt

@@ -1,4 +1,5 @@
 aabbcc
+aarch
 ABANDONFONT
 abbcc
 ABCDEFGHIJKLMNOPQRSTUVWXY
@@ -6,7 +7,6 @@ ABCF
 abgr
 abi
 ABORTIFHUNG
-ACCESSTOKEN
 acidev
 ACIOSS
 ACover
@@ -17,7 +17,6 @@ ADDALIAS
 ADDREF
 ADDSTRING
 ADDTOOL
-AEnd
 AFew
 AFill
 AFX
@@ -78,7 +77,6 @@ aumid
 Authenticode
 AUTOBUDDY
 AUTOCHECKBOX
-autocrlf
 autohide
 AUTOHSCROLL
 automagically
@@ -105,6 +103,7 @@ bcx
 bcz
 BEFOREPARENT
 beginthread
+benchcat
 bgfx
 bgidx
 Bgk
@@ -116,10 +115,8 @@ binplace
 binplaced
 bitcoin
 bitcrazed
-bitflag
 bitmask
 BITOPERATION
-bitsets
 BKCOLOR
 BKGND
 Bksp
@@ -148,17 +145,16 @@ bufferout
 buffersize
 buflen
 buildtransitive
-BUILDURI
 burriter
 BValue
 bytebuffer
 cac
 cacafire
+CALLCONV
 capslock
 CARETBLINKINGENABLED
 CARRIAGERETURN
 cascadia
-castsi
 catid
 cazamor
 CBash
@@ -200,7 +196,6 @@ CHT
 Cic
 cielab
 Cielab
-Clcompile
 CLE
 cleartype
 CLICKACTIVE
@@ -219,7 +214,6 @@ cmder
 CMDEXT
 cmh
 CMOUSEBUTTONS
-cmpeq
 cmt
 cmw
 cmyk
@@ -232,7 +226,6 @@ codepage
 codepath
 codepoints
 coinit
-COLLECTIONURI
 colorizing
 COLORMATRIX
 COLORREFs
@@ -320,7 +313,6 @@ CPPCORECHECK
 cppcorecheckrules
 cpprestsdk
 cppwinrt
-CProc
 cpx
 CREATESCREENBUFFER
 CREATESTRUCT
@@ -384,7 +376,6 @@ dai
 DATABLOCK
 DBatch
 dbcs
-DBCSCHAR
 DBCSFONT
 dbg
 DBGALL
@@ -413,6 +404,7 @@ DECANM
 DECARM
 DECAUPSS
 DECAWM
+DECBI
 DECBKM
 DECCARA
 DECCIR
@@ -421,13 +413,17 @@ DECCKSR
 DECCOLM
 DECCRA
 DECCTR
+DECDC
 DECDHL
 decdld
 DECDMAC
 DECDWL
+DECECM
 DECEKBD
 DECERA
+DECFI
 DECFRA
+DECIC
 DECID
 DECINVM
 DECKPAM
@@ -438,6 +434,7 @@ DECMSR
 DECNKM
 DECNRCM
 DECOM
+decommit
 DECPCTERM
 DECPS
 DECRARA
@@ -467,6 +464,7 @@ DECSLPP
 DECSLRM
 DECSMKR
 DECSR
+DECST
 DECSTBM
 DECSTGLT
 DECSTR
@@ -500,7 +498,6 @@ devicecode
 Dext
 DFactory
 DFF
-dhandler
 dialogbox
 directio
 DIRECTX
@@ -519,7 +516,6 @@ dllmain
 DLLVERSIONINFO
 DLOAD
 DLOOK
-dmp
 DONTCARE
 doskey
 dotnet
@@ -573,8 +569,8 @@ Edgium
 EDITKEYS
 EDITTEXT
 EDITUPDATE
-edputil
 Efast
+efghijklmn
 EHsc
 EINS
 EJO
@@ -583,6 +579,7 @@ elems
 emacs
 EMPTYBOX
 enabledelayedexpansion
+ENDCAP
 endptr
 endregion
 ENTIREBUFFER
@@ -596,7 +593,6 @@ eplace
 EPres
 EQU
 ERASEBKGND
-etcoreapp
 ETW
 EUDC
 EVENTID
@@ -610,7 +606,6 @@ EXETYPE
 exeuwp
 exewin
 exitwin
-expectedinput
 EXPUNGECOMMANDHISTORY
 EXSTYLE
 EXTENDEDEDITKEY
@@ -638,7 +633,6 @@ FGs
 FILEDESCRIPTION
 FILESUBTYPE
 FILESYSPATH
-fileurl
 FILEW
 FILLATTR
 FILLCONSOLEOUTPUT
@@ -687,7 +681,7 @@ FSINFOCLASS
 fte
 Ftm
 Fullscreens
-fullwidth
+Fullwidth
 FUNCTIONCALL
 fuzzer
 fuzzmain
@@ -758,7 +752,6 @@ gfx
 GGI
 GHIJK
 GHIJKL
-GHIJKLM
 gitfilters
 gitmodules
 gle
@@ -820,7 +813,6 @@ HIWORD
 HKCU
 hkey
 hkl
-HKLM
 hlocal
 hlsl
 HMB
@@ -828,7 +820,6 @@ HMK
 hmod
 hmodule
 hmon
-homeglyphs
 homoglyph
 HORZ
 hostable
@@ -836,7 +827,7 @@ hostlib
 HPA
 hpcon
 HPCON
-hpj
+hpen
 HPR
 HProvider
 HREDRAW
@@ -916,6 +907,7 @@ INSERTMODE
 INTERACTIVITYBASE
 INTERCEPTCOPYPASTE
 INTERNALNAME
+Interner
 intsafe
 INVALIDARG
 INVALIDATERECT
@@ -932,12 +924,10 @@ itermcolors
 ITerminal
 itf
 Ith
-itoa
 IUI
 IUnknown
 ivalid
 IWIC
-IXMP
 IXP
 jconcpp
 JOBOBJECT
@@ -961,7 +951,6 @@ kernelbasestaging
 KEYBDINPUT
 keychord
 keydown
-keyevent
 KEYFIRST
 KEYLAST
 Keymapping
@@ -976,13 +965,15 @@ KLF
 KLMNO
 KLMNOPQRST
 KLMNOPQRSTQQQQQ
+KLMNOPQRSTUVWXY
+KLMNOPQRSTY
 KOK
 KPRIORITY
 KVM
 langid
 LANGUAGELIST
 lasterror
-lastexitcode
+LASTEXITCODE
 LAYOUTRTL
 lbl
 LBN
@@ -1006,30 +997,28 @@ LINEWRAP
 LINKERRCAP
 LINKERROR
 linputfile
-listproperties
 listptr
 listptrsize
 lld
 llx
 LMENU
-LMNOP
 lnk
 lnkd
 lnkfile
 LNM
 LOADONCALL
-loadu
 LOBYTE
 localappdata
 locsrc
 Loewen
+LOGBRUSH
 LOGFONT
 LOGFONTA
 LOGFONTW
 logissue
+losslessly
 loword
 lparam
-LPCCH
 lpch
 LPCPLINFO
 LPCREATESTRUCT
@@ -1112,6 +1101,7 @@ MDs
 MEASUREITEM
 megamix
 memallocator
+meme
 MENUCHAR
 MENUCONTROL
 MENUDROPALIGNMENT
@@ -1125,7 +1115,6 @@ MIIM
 milli
 mincore
 mindbogglingly
-minimizeall
 minkernel
 MINMAXINFO
 minwin
@@ -1139,6 +1128,7 @@ mmsystem
 MNC
 MNOPQ
 MNOPQR
+MNOPQRSTUVWXY
 MODALFRAME
 MODERNCORE
 MONITORINFO
@@ -1148,7 +1138,6 @@ MOUSEACTIVATE
 MOUSEFIRST
 MOUSEHWHEEL
 MOUSEMOVE
-movemask
 MOVESTART
 msb
 msctf
@@ -1228,14 +1217,12 @@ NOMOVE
 NONALERT
 nonbreaking
 nonclient
-NONCONST
 NONINFRINGEMENT
 NONPREROTATED
 nonspace
 NOOWNERZORDER
 Nop
 NOPAINT
-NOPQRST
 noprofile
 NOREDRAW
 NOREMOVE
@@ -1312,7 +1299,7 @@ onecoreuuid
 ONECOREWINDOWS
 onehalf
 oneseq
-ONLCR
+OOM
 openbash
 opencode
 opencon
@@ -1322,13 +1309,6 @@ openps
 openvt
 ORIGINALFILENAME
 osc
-OSCBG
-OSCCT
-OSCFG
-OSCRCC
-OSCSCB
-OSCSCC
-OSCWT
 OSDEPENDSROOT
 OSG
 OSGENG
@@ -1460,8 +1440,8 @@ prc
 prealigned
 prect
 prefast
+preflighting
 prefs
-preinstalled
 prepopulated
 presorted
 PREVENTPINNING
@@ -1474,7 +1454,6 @@ prioritization
 processenv
 processhost
 PROCESSINFOCLASS
-procs
 PROPERTYID
 PROPERTYKEY
 PROPERTYVAL
@@ -1489,7 +1468,6 @@ propvariant
 propvarutil
 psa
 PSECURITY
-pseudocode
 pseudoconsole
 pseudoterminal
 psh
@@ -1519,7 +1497,6 @@ pwsz
 pythonw
 Qaabbcc
 qos
-QRSTU
 QUERYOPEN
 QUESTIONMARK
 quickedit
@@ -1600,7 +1577,6 @@ rgbs
 rgci
 rgfae
 rgfte
-rgi
 rgn
 rgp
 rgpwsz
@@ -1608,7 +1584,6 @@ rgrc
 rgs
 rgui
 rgw
-rgwch
 RIGHTALIGN
 RIGHTBUTTON
 riid
@@ -1769,9 +1744,7 @@ SND
 SOLIDBOX
 Solutiondir
 somefile
-SOURCEBRANCH
 sourced
-spammy
 SRCCODEPAGE
 SRCCOPY
 SRCINVERT
@@ -1800,11 +1773,11 @@ stdafx
 STDAPI
 stdc
 stdcpp
+STDEXT
 STDMETHODCALLTYPE
 STDMETHODIMP
 STGM
 stl
-stoutapot
 Stri
 Stringable
 STRINGTABLE
@@ -1821,7 +1794,6 @@ SUBLANG
 subresource
 subsystemconsole
 subsystemwindows
-suiteless
 swapchain
 swapchainpanel
 swappable
@@ -1860,13 +1832,11 @@ TBM
 tchar
 TCHFORMAT
 TCI
-tcome
 tcommandline
 tcommands
 Tdd
 TDelegated
 TDP
-TEAMPROJECT
 tearoff
 Teb
 Techo
@@ -1878,23 +1848,16 @@ terminalrenderdata
 TERMINALSCROLLING
 terminfo
 TEs
-testbuildplatform
 testcon
 testd
-testdlls
 testenv
 testlab
 testlist
 testmd
-testmode
 testname
-testnameprefix
 TESTNULL
 testpass
 testpasses
-testtestabc
-testtesttesttesttest
-testtimeout
 TEXCOORD
 texel
 TExpected
@@ -1922,7 +1885,6 @@ TJson
 TLambda
 TLDP
 TLEN
-Tlgdata
 TMAE
 TMPF
 TMult
@@ -1942,9 +1904,9 @@ touchpad
 Tpp
 Tpqrst
 tprivapi
+tput
 tracelog
 tracelogging
-traceloggingprovider
 traceviewpp
 trackbar
 TRACKCOMPOSITION
@@ -1982,11 +1944,14 @@ UAC
 uap
 uapadmin
 UAX
+UBool
 ucd
 uch
+UChars
 udk
 UDM
 uer
+UError
 uget
 uia
 UIACCESS
@@ -2016,13 +1981,14 @@ unknwn
 UNORM
 unparseable
 unregistering
-untests
 untextured
 untimes
 UPDATEDISPLAY
 UPDOWN
 UPKEY
 UPSS
+uregex
+URegular
 usebackq
 USECALLBACK
 USECOLOR
@@ -2033,7 +1999,6 @@ USEFILLATTRIBUTE
 USEGLYPHCHARS
 USEHICON
 USEPOSITION
-userbase
 USERDATA
 userdpiapi
 Userp
@@ -2044,9 +2009,12 @@ USESIZE
 USESTDHANDLES
 usp
 USRDLL
+utext
+UText
+UTEXT
 utr
-UVWX
 UVWXY
+UVWXYZ
 uwa
 uwp
 uxtheme
@@ -2057,6 +2025,7 @@ vcpkg
 vcprintf
 vcxitems
 vec
+vectorize
 vectorized
 VERCTRL
 VERTBAR
@@ -2072,8 +2041,6 @@ VKKEYSCAN
 VMs
 VPA
 VPR
-VProc
-VRaw
 VREDRAW
 vsc
 vsconfig
@@ -2102,8 +2069,6 @@ VTRGBTo
 vtseq
 vtterm
 vttest
-VWX
-waaay
 waitable
 WANSUNG
 WANTARROWS
@@ -2117,7 +2082,6 @@ WCIA
 WCIW
 WCSHELPER
 wcsicmp
-wcsnicmp
 wcsrev
 wddm
 wddmcon
@@ -2152,7 +2116,6 @@ windbg
 WINDEF
 windll
 WINDOWALPHA
-Windowbuffer
 windowdpiapi
 WINDOWEDGE
 windowext
@@ -2222,7 +2185,6 @@ wprp
 wprpi
 wregex
 writeback
-writechar
 WRITECONSOLE
 WRITECONSOLEINPUT
 WRITECONSOLEOUTPUT
@@ -2296,17 +2258,19 @@ xunit
 xutr
 XVIRTUALSCREEN
 XWalk
-xxyyzz
 yact
 YCast
 YCENTER
 YCount
 YDPI
+YLimit
 YOffset
 YSubstantial
 YVIRTUALSCREEN
 YWalk
+Zab
 zabcd
+Zabcdefghijklmn
 Zabcdefghijklmnopqrstuvwxyz
 ZCmd
 ZCtrl

.github/actions/spelling/expect/web.txt

@@ -4,3 +4,4 @@ appshellintegration
 mdtauk
 gfycat
 Guake
+xkcd

.github/actions/spelling/patterns/patterns.txt

@@ -27,6 +27,12 @@ ROY\sG\.\sBIV
 # Python stringprefix / binaryprefix
 \b(?:B|BR|Br|F|FR|Fr|R|RB|RF|Rb|Rf|U|UR|Ur|b|bR|br|f|fR|fr|r|rB|rF|rb|rf|u|uR|ur)'
 
+# SSE intrinsics like "_mm_subs_epu16"
+\b_mm(?:|256|512)_\w+\b
+
+# ARM NEON intrinsics like "vsubq_u16"
+\bv\w+_[fsu](?:8|16|32|64)\b
+
 # Automatically suggested patterns
 # hit-count: 3831 file-count: 582
 # IServiceProvider

.github/policies/resourceManagement.yml

@@ -0,0 +1,751 @@
+id: 
+name: GitOps.PullRequestIssueManagement
+description: GitOps.PullRequestIssueManagement primitive
+owner: 
+resource: repository
+disabled: false
+where: 
+configuration:
+  resourceManagementConfiguration:
+    scheduledSearches:
+    - description: 
+      frequencies:
+      - hourly:
+          hour: 3
+      filters:
+      - isIssue
+      - isOpen
+      - hasLabel:
+          label: Needs-Author-Feedback
+      - hasLabel:
+          label: No-Recent-Activity
+      - noActivitySince:
+          days: 3
+      actions:
+      - closeIssue
+    - description: 
+      frequencies:
+      - hourly:
+          hour: 3
+      filters:
+      - isIssue
+      - isOpen
+      - hasLabel:
+          label: Needs-Author-Feedback
+      - noActivitySince:
+          days: 4
+      - isNotLabeledWith:
+          label: No-Recent-Activity
+      actions:
+      - addLabel:
+          label: No-Recent-Activity
+      - addReply:
+          reply: This issue has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **4 days**. It will be closed if no further activity occurs **within 3 days of this comment**.
+    - description: 
+      frequencies:
+      - hourly:
+          hour: 3
+      filters:
+      - isIssue
+      - isOpen
+      - hasLabel:
+          label: Resolution-Duplicate
+      - noActivitySince:
+          days: 1
+      actions:
+      - addReply:
+          reply: This issue has been marked as duplicate and has not had any activity for **1 day**. It will be closed for housekeeping purposes.
+      - closeIssue
+    - description: 
+      frequencies:
+      - hourly:
+          hour: 3
+      filters:
+      - isPullRequest
+      - isOpen
+      - hasLabel:
+          label: Needs-Author-Feedback
+      - hasLabel:
+          label: No-Recent-Activity
+      - noActivitySince:
+          days: 7
+      actions:
+      - closeIssue
+    - description: 
+      frequencies:
+      - hourly:
+          hour: 3
+      filters:
+      - isPullRequest
+      - isOpen
+      - hasLabel:
+          label: Needs-Author-Feedback
+      - noActivitySince:
+          days: 7
+      - isNotLabeledWith:
+          label: No-Recent-Activity
+      actions:
+      - addLabel:
+          label: No-Recent-Activity
+      - addReply:
+          reply: This pull request has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **7 days**. It will be closed if no further activity occurs **within 7 days of this comment**.
+    eventResponderTasks:
+    - if:
+      - payloadType: Issues
+      - or:
+        - and:
+          - isAction:
+              action: Opened
+          - not:
+              hasLabel:
+                label: ⛺ Reserved
+      then:
+      - addLabel:
+          label: Needs-Triage
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - isAction:
+          action: Created
+      - isActivitySender:
+          issueAuthor: True
+      - hasLabel:
+          label: Needs-Author-Feedback
+      then:
+      - addLabel:
+          label: Needs-Attention
+      - removeLabel:
+          label: Needs-Author-Feedback
+      description: 
+    - if:
+      - payloadType: Issues
+      - not:
+          isAction:
+            action: Closed
+      - hasLabel:
+          label: No-Recent-Activity
+      then:
+      - removeLabel:
+          label: No-Recent-Activity
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - hasLabel:
+          label: No-Recent-Activity
+      then:
+      - removeLabel:
+          label: No-Recent-Activity
+      description: 
+    - if:
+      - payloadType: Pull_Request_Review
+      - isAction:
+          action: Submitted
+      - isReviewState:
+          reviewState: Changes_requested
+      then:
+      - addLabel:
+          label: Needs-Author-Feedback
+      description: 
+    - if:
+      - payloadType: Pull_Request
+      - isActivitySender:
+          issueAuthor: True
+      - not:
+          isAction:
+            action: Closed
+      - hasLabel:
+          label: Needs-Author-Feedback
+      then:
+      - removeLabel:
+          label: Needs-Author-Feedback
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - isActivitySender:
+          issueAuthor: True
+      - hasLabel:
+          label: Needs-Author-Feedback
+      then:
+      - removeLabel:
+          label: Needs-Author-Feedback
+      description: 
+    - if:
+      - payloadType: Pull_Request_Review
+      - isActivitySender:
+          issueAuthor: True
+      - hasLabel:
+          label: Needs-Author-Feedback
+      then:
+      - removeLabel:
+          label: Needs-Author-Feedback
+      description: 
+    - if:
+      - payloadType: Pull_Request
+      - not:
+          isAction:
+            action: Closed
+      - hasLabel:
+          label: No-Recent-Activity
+      then:
+      - removeLabel:
+          label: No-Recent-Activity
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - hasLabel:
+          label: No-Recent-Activity
+      then:
+      - removeLabel:
+          label: No-Recent-Activity
+      description: 
+    - if:
+      - payloadType: Pull_Request_Review
+      - hasLabel:
+          label: No-Recent-Activity
+      then:
+      - removeLabel:
+          label: No-Recent-Activity
+      description: 
+    - if:
+      - payloadType: Pull_Request
+      - hasLabel:
+          label: AutoMerge
+      then:
+      - enableAutoMerge:
+          mergeMethod: Squash
+      description: 
+    - if:
+      - payloadType: Pull_Request
+      - labelRemoved:
+          label: AutoMerge
+      then:
+      - disableAutoMerge
+      description: 
+    - if:
+      - payloadType: Issues
+      - or:
+        - and:
+          - isLabeled
+          - hasLabel:
+              label: Mass-Chaos
+        - isOpen
+        - isLabeled
+      - not:
+          hasLabel:
+            label: Needs-Tag-Fix
+      - or:
+        - and:
+          - not:
+              hasLabel:
+                label: Area-Accessibility
+          - not:
+              hasLabel:
+                label: Area-Build
+          - not:
+              hasLabel:
+                label: Area-Extensibility
+          - not:
+              hasLabel:
+                label: Area-Fonts
+          - not:
+              hasLabel:
+                label: Area-Input
+          - not:
+              hasLabel:
+                label: Area-Interaction
+          - not:
+              hasLabel:
+                label: Area-Interop
+          - not:
+              hasLabel:
+                label: Area-Output
+          - not:
+              hasLabel:
+                label: Area-Performance
+          - not:
+              hasLabel:
+                label: Area-Rendering
+          - not:
+              hasLabel:
+                label: Area-Server
+          - not:
+              hasLabel:
+                label: Area-Settings
+          - not:
+              hasLabel:
+                label: Area-TerminalConnection
+          - not:
+              hasLabel:
+                label: Area-TerminalControl
+          - not:
+              hasLabel:
+                label: Area-User Interface
+          - not:
+              hasLabel:
+                label: Area-VT
+          - not:
+              hasLabel:
+                label: Area-CodeHealth
+          - not:
+              hasLabel:
+                label: Area-Quality
+          - not:
+              hasLabel:
+                label: Area-AzureShell
+          - not:
+              hasLabel:
+                label: Area-Schema
+          - not:
+              hasLabel:
+                label: Area-Commandline
+          - not:
+              hasLabel:
+                label: Area-ShellExtension
+          - not:
+              hasLabel:
+                label: Area-WPFControl
+          - not:
+              hasLabel:
+                label: Area-Settings UI
+          - not:
+              hasLabel:
+                label: Area-DefApp
+          - not:
+              hasLabel:
+                label: Area-Remoting
+          - not:
+              hasLabel:
+                label: Area-Windowing
+          - not:
+              hasLabel:
+                label: Area-Theming
+          - not:
+              hasLabel:
+                label: Area-Localization
+        - and:
+          - not:
+              hasLabel:
+                label: Issue-Bug
+          - not:
+              hasLabel:
+                label: Issue-Docs
+          - not:
+              hasLabel:
+                label: Issue-Feature
+          - not:
+              hasLabel:
+                label: Issue-Question
+          - not:
+              hasLabel:
+                label: Issue-Samples
+          - not:
+              hasLabel:
+                label: Issue-Task
+          - not:
+              hasLabel:
+                label: Issue-Scenario
+        - and:
+          - not:
+              hasLabel:
+                label: Product-Cmd.exe
+          - not:
+              hasLabel:
+                label: Product-Colortool
+          - not:
+              hasLabel:
+                label: Product-Conhost
+          - not:
+              hasLabel:
+                label: Product-Conpty
+          - not:
+              hasLabel:
+                label: Product-Meta
+          - not:
+              hasLabel:
+                label: Product-Powershell
+          - not:
+              hasLabel:
+                label: Product-Terminal
+          - not:
+              hasLabel:
+                label: Product-WSL
+        - and:
+          - not: isOpen
+          - and:
+            - not:
+                hasLabel:
+                  label: Resolution-Answered
+            - not:
+                hasLabel:
+                  label: Resolution-By-Design
+            - not:
+                hasLabel:
+                  label: Resolution-Duplicate
+            - not:
+                hasLabel:
+                  label: Resolution-External
+            - not:
+                hasLabel:
+                  label: Resolution-Fix-Available
+            - not:
+                hasLabel:
+                  label: Resolution-Fix-Committed
+            - not:
+                hasLabel:
+                  label: Resolution-Won't-Fix
+      - not:
+          hasLabel:
+            label: Needs-Triage
+      - not:
+          hasLabel:
+            label: Resolution-Duplicate
+      - not:
+          hasLabel:
+            label: ⛺ Reserved
+      - not:
+          hasLabel:
+            label: Tracking-External
+      then:
+      - addLabel:
+          label: Needs-Tag-Fix
+      description: 
+    - if:
+      - payloadType: Issues
+      - and:
+        - isLabeled
+        - hasLabel:
+            label: Needs-Tag-Fix
+      - and:
+        - or:
+          - hasLabel:
+              label: Area-Accessibility
+          - hasLabel:
+              label: Area-Build
+          - hasLabel:
+              label: Area-Extensibility
+          - hasLabel:
+              label: Area-Fonts
+          - hasLabel:
+              label: Area-Input
+          - hasLabel:
+              label: Area-Interaction
+          - hasLabel:
+              label: Area-Interop
+          - hasLabel:
+              label: Area-Output
+          - hasLabel:
+              label: Area-Performance
+          - hasLabel:
+              label: Area-Rendering
+          - hasLabel:
+              label: Area-Server
+          - hasLabel:
+              label: Area-Settings
+          - hasLabel:
+              label: Area-TerminalConnection
+          - hasLabel:
+              label: Area-TerminalControl
+          - hasLabel:
+              label: Area-User Interface
+          - hasLabel:
+              label: Area-VT
+          - hasLabel:
+              label: Area-CodeHealth
+          - hasLabel:
+              label: Area-Quality
+          - hasLabel:
+              label: Area-Schema
+          - hasLabel:
+              label: Area-AzureShell
+          - hasLabel:
+              label: Area-Commandline
+          - hasLabel:
+              label: Area-ShellExtension
+          - hasLabel:
+              label: Area-WPFControl
+          - hasLabel:
+              label: Area-Settings UI
+          - hasLabel:
+              label: Area-DefApp
+          - hasLabel:
+              label: Area-Localization
+          - hasLabel:
+              label: Area-Windowing
+          - hasLabel:
+              label: Area-Theming
+          - hasLabel:
+              label: Area-AtlasEngine
+          - hasLabel:
+              label: Area-CmdPal
+        - or:
+          - hasLabel:
+              label: Issue-Bug
+          - hasLabel:
+              label: Issue-Docs
+          - hasLabel:
+              label: Issue-Feature
+          - hasLabel:
+              label: Issue-Question
+          - hasLabel:
+              label: Issue-Samples
+          - hasLabel:
+              label: Issue-Task
+          - hasLabel:
+              label: Issue-Scenario
+        - or:
+          - hasLabel:
+              label: Product-Cmd.exe
+          - hasLabel:
+              label: Product-Colortool
+          - hasLabel:
+              label: Product-Conhost
+          - hasLabel:
+              label: Product-Conpty
+          - hasLabel:
+              label: Product-Meta
+          - hasLabel:
+              label: Product-Powershell
+          - hasLabel:
+              label: Product-Terminal
+          - hasLabel:
+              label: Product-WSL
+        - or:
+          - isOpen
+          - and:
+            - not: isOpen
+            - or:
+              - hasLabel:
+                  label: Resolution-Answered
+              - hasLabel:
+                  label: Resolution-By-Design
+              - hasLabel:
+                  label: Resolution-Duplicate
+              - hasLabel:
+                  label: Resolution-External
+              - hasLabel:
+                  label: Resolution-Fix-Available
+              - hasLabel:
+                  label: Resolution-Fix-Committed
+              - hasLabel:
+                  label: Resolution-Won't-Fix
+              - hasLabel:
+                  label: Tracking-External
+      then:
+      - removeLabel:
+          label: Needs-Tag-Fix
+      description: 
+    - if:
+      - payloadType: Pull_Request
+      then:
+      - inPrLabel:
+          label: In-PR
+      description: 
+    - if:
+      - payloadType: Issues
+      - hasLabel:
+          label: Needs-Tag-Fix
+      - hasLabel:
+          label: Resolution-Duplicate
+      then:
+      - removeLabel:
+          label: Needs-Tag-Fix
+      description: 
+    - if:
+      - payloadType: Issues
+      - or:
+        - titleContains:
+            pattern: ^\s*Bug Report \(IF I DO NOT CHANGE THIS THE ISSUE WILL BE AUTO-CLOSED\)\s*$
+            isRegex: True
+        - titleContains:
+            pattern: ^\s*Bug Report\s*$
+            isRegex: True
+      - or:
+        - isAction:
+            action: Opened
+        - isAction:
+            action: Reopened
+      - not:
+          activitySenderHasPermission:
+            permission: Write
+      - not:
+          activitySenderHasPermission:
+            permission: Admin
+      then:
+      - closeIssue
+      - addLabel:
+          label: Needs-Author-Feedback
+      - addReply:
+          reply: Hi! Thanks for attempting to open an issue. Unfortunately, your title wasn't changed from the original template which makes it very hard for us to track and triage. You are welcome to fix up the title and try again with a new issue.
+      description: 
+    - if:
+      - payloadType: Issues
+      - or:
+        - isAction:
+            action: Opened
+        - isAction:
+            action: Reopened
+      - or:
+        - not:
+            bodyContains:
+              pattern: .+
+              isRegex: True
+      then:
+      - closeIssue
+      - addLabel:
+          label: Needs-Author-Feedback
+      - addReply:
+          reply: "Hi! Thanks for attempting to open an issue. Unfortunately, you didn't write anything in the body which makes it impossible to understand your concern. You are welcome to fix up the issue and try again by opening another issue with the body filled out. "
+      description: 
+    - if:
+      - payloadType: Pull_Request
+      - isLabeled
+      - hasLabel:
+          label: Needs-Second
+      - isOpen
+      then:
+      - requestReview:
+          reviewer: zadjii-msft
+      - requestReview:
+          reviewer: PankajBhojwani
+      - requestReview:
+          reviewer: carlos-zamora
+      - requestReview:
+          reviewer: dhowett
+      - requestReview:
+          reviewer: lhecker
+      description: 
+    - if:
+      - payloadType: Pull_Request_Review
+      - not: isOpen
+      - hasLabel:
+          label: Needs-Second
+      then:
+      - removeLabel:
+          label: Needs-Second
+      description: 
+    - if:
+      - payloadType: Issues
+      - hasLabel:
+          label: In-PR
+      - hasLabel:
+          label: Help Wanted
+      - isLabeled
+      then:
+      - removeLabel:
+          label: Help-Wanted
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - commentContains:
+          pattern: '\/dup(licate|e)?(\s+of)?\s+\#[\d]+'
+          isRegex: True
+      - or:
+        - activitySenderHasPermission:
+            permission: Admin
+        - activitySenderHasPermission:
+            permission: Write
+      then:
+      - addReply:
+          reply: Hi! We've identified this issue as a duplicate of another one that already exists on this Issue Tracker. This specific instance is being closed in favor of tracking the concern over on the referenced thread. Thanks for your report!
+      - closeIssue
+      - removeLabel:
+          label: Needs-Triage
+      - addLabel:
+          label: Resolution-Duplicate
+      - removeLabel:
+          label: Needs-Tag-Fix
+      - removeLabel:
+          label: Needs-Attention
+      - removeLabel:
+          label: Needs-Author-Feedback
+      - removeLabel:
+          label: Needs-Repro
+      - removeLabel:
+          label: Needs-Second
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - commentContains:
+          pattern: '\/feedback'
+          isRegex: True
+      - or:
+        - activitySenderHasPermission:
+            permission: Admin
+        - activitySenderHasPermission:
+            permission: Write
+      then:
+      - addReply:
+          reply: >2-
+
+            Hi there!<br><br>Can you please send us feedback with the [Feedback Hub](https://support.microsoft.com/en-us/windows/send-feedback-to-microsoft-with-the-feedback-hub-app-f59187f8-8739-22d6-ba93-f66612949332) with this issue? Make sure to click the "Start recording" button, then reproduce the issue before submitting the feedback. Once it's submitted, paste the link here so we can more easily find your crash information on the back end?<br><br>Thanks!<br><br>![image](https://user-images.githubusercontent.com/18356694/140811502-a068f78b-89d2-4587-925a-73e19652b830.png)<br><br>![image](https://user-images.githubusercontent.com/18356694/140811557-cdc22a0f-fa6a-4f6a-953e-73b51f5548a3.png)<br><br>![image](https://user-images.githubusercontent.com/18221333/62478649-6de55400-b760-11e9-806e-5aab7e085a9f.png)
+      - addLabel:
+          label: Needs-Author-Feedback
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      then:
+      - cleanEmailReply
+      description: 
+    - if:
+      - payloadType: Pull_Request
+      then:
+      - labelSync:
+          pattern: Issue-
+      - labelSync:
+          pattern: Area-
+      - labelSync:
+          pattern: Priority-
+      - labelSync:
+          pattern: Product-
+      - labelSync:
+          pattern: Severity-
+      - labelSync:
+          pattern: Impact-
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - commentContains:
+          pattern: '\/dup(licate|e)?(\s+of)?\s+https'
+          isRegex: True
+      - or:
+        - activitySenderHasPermission:
+            permission: Admin
+        - activitySenderHasPermission:
+            permission: Write
+      then:
+      - addReply:
+          reply: Hi! We've identified this issue as a duplicate of one that exists on somebody else's Issue Tracker. Please make sure you subscribe to the referenced external issue for future updates. Thanks for your report!
+      - closeIssue
+      - removeLabel:
+          label: Needs-Triage
+      - addLabel:
+          label: Resolution-External
+      - removeLabel:
+          label: Needs-Attention
+      - removeLabel:
+          label: Needs-Author-Feedback
+      - removeLabel:
+          label: Needs-Bisect
+      - removeLabel:
+          label: Needs-Repro
+      - removeLabel:
+          label: Needs-Second
+      description: 
+    - if:
+      - payloadType: Issue_Comment
+      - commentContains:
+          pattern: /?
+          isRegex: False
+      - or:
+        - activitySenderHasPermission:
+            permission: Admin
+        - activitySenderHasPermission:
+            permission: Write
+      then:
+      - removeLabel:
+          label: Needs-Attention
+      - addLabel:
+          label: Needs-Author-Feedback
+      description: 
+onFailure: 
+onSuccess: 

.vscode/settings.json

@@ -103,7 +103,9 @@
     "files.exclude": {
         "**/bin/**": true,
         "**/obj/**": true,
-        "**/packages/**": true,
         "**/Generated Files/**": true
+    },
+    "search.exclude": {
+        "**/packages/**": true
     }
 }

CONTRIBUTING.md

@@ -101,7 +101,7 @@ If you don't have any additional info/context to add but would like to indicate
 
 If you're able & willing to help fix issues and/or implement features, we'd love your contribution!
 
-The best place to start is the list of ["good first issue"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22++label%3A%22good+first+issue%22+)s. These are bugs or tasks that we on the team believe would be easier to implement for someone without any prior experience in the codebase. Once you're feeling more comfortable in the codebase, feel free to just use the ["Help Wanted"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22+) label, or just find an issue you're interested in and hop in!
+The best place to start is the list of ["walkthroughs"](https://aka.ms/terminal-walkthroughs). This is a collection of issues where we've written a "walkthrough", little guides to help get started with a particular issue. These are usually good first issues, and are a great way to get familiar with the codebase. Additionally, the list of ["good first issue"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22++label%3A%22good+first+issue%22+)s is another set of issues that might be easier for first-time contributors. Once you're feeling more comfortable in the codebase, feel free to just use the ["Help Wanted"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22+) label, or just find any issue you're interested in and hop in!
 
 Generally, we categorize issues in the following way, which is largely derived from our old internal work tracking system:
 * ["Bugs"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Bug%22+) are parts of the Terminal & Console that are not quite working the right way. There's code to already support some scenario, but it's not quite working right. Fixing these is generally a matter of debugging the broken functionality and fixing the wrong code.

OpenConsole.sln

@@ -239,8 +239,6 @@ Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "Shared", "Shared", "{89CDCC
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Types.Unit.Tests", "src\types\ut_types\Types.Unit.Tests.vcxproj", "{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}"
 EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "PublicTerminalCore", "src\cascadia\PublicTerminalCore\PublicTerminalCore.vcxproj", "{84848BFA-931D-42CE-9ADF-01EE54DE7890}"
-EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "WpfTerminalControl", "src\cascadia\WpfTerminalControl\WpfTerminalControl.csproj", "{376FE273-6B84-4EB5-8B30-8DE9D21B022C}"
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "UnitTests_TerminalApp", "src\cascadia\ut_app\TerminalApp.UnitTests.vcxproj", "{CA5CAD1A-9333-4D05-B12A-1905CBF112F9}"
@@ -334,7 +332,7 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "fmt", "src\dep\fmt\fmt.vcxp
 EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "WpfTerminalTestNetCore", "src\cascadia\WpfTerminalTestNetCore\WpfTerminalTestNetCore.csproj", "{1588FD7C-241E-4E7D-9113-43735F3E6BAD}"
 	ProjectSection(ProjectDependencies) = postProject
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890} = {84848BFA-931D-42CE-9ADF-01EE54DE7890}
+		{CA5CAD1A-F542-4635-A069-7CAEFB930070} = {CA5CAD1A-F542-4635-A069-7CAEFB930070}
 		{A22EC5F6-7851-4B88-AC52-47249D437A52} = {A22EC5F6-7851-4B88-AC52-47249D437A52}
 	EndProjectSection
 EndProject
@@ -420,6 +418,10 @@ Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "TerminalStress", "src\tools
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "RenderingTests", "src\tools\RenderingTests\RenderingTests.vcxproj", "{37C995E0-2349-4154-8E77-4A52C0C7F46D}"
 EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "benchcat", "src\tools\benchcat\benchcat.vcxproj", "{2C836962-9543-4CE5-B834-D28E1F124B66}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "ConsoleMonitor", "src\tools\ConsoleMonitor\ConsoleMonitor.vcxproj", "{328729E9-6723-416E-9C98-951F1473BBE1}"
+EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
 		AuditMode|Any CPU = AuditMode|Any CPU
@@ -1707,34 +1709,6 @@ Global
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}.Release|x64.Build.0 = Release|x64
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}.Release|x86.ActiveCfg = Release|Win32
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73}.Release|x86.Build.0 = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|ARM.ActiveCfg = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|ARM64.ActiveCfg = AuditMode|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x64.ActiveCfg = AuditMode|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x64.Build.0 = AuditMode|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x86.ActiveCfg = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.AuditMode|x86.Build.0 = AuditMode|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|Any CPU.ActiveCfg = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|ARM.ActiveCfg = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|ARM64.Build.0 = Debug|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x64.ActiveCfg = Debug|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x64.Build.0 = Debug|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x86.ActiveCfg = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Debug|x86.Build.0 = Debug|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|ARM.ActiveCfg = Fuzzing|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|Any CPU.ActiveCfg = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|ARM.ActiveCfg = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|ARM64.ActiveCfg = Release|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|ARM64.Build.0 = Release|ARM64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x64.ActiveCfg = Release|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x64.Build.0 = Release|x64
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x86.ActiveCfg = Release|Win32
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890}.Release|x86.Build.0 = Release|Win32
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C}.AuditMode|Any CPU.ActiveCfg = Release|Any CPU
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C}.AuditMode|ARM.ActiveCfg = Debug|Any CPU
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C}.AuditMode|ARM.Build.0 = Debug|Any CPU
@@ -2780,11 +2754,8 @@ Global
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|Any CPU.ActiveCfg = Debug|Win32
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|ARM.ActiveCfg = Debug|Win32
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|ARM64.ActiveCfg = Debug|ARM64
-		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|ARM64.Build.0 = Debug|ARM64
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|x64.ActiveCfg = Debug|x64
-		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|x64.Build.0 = Debug|x64
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|x86.ActiveCfg = Debug|Win32
-		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Debug|x86.Build.0 = Debug|Win32
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Fuzzing|ARM.ActiveCfg = Fuzzing|Win32
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
@@ -2793,11 +2764,48 @@ Global
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|Any CPU.ActiveCfg = Release|Win32
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|ARM.ActiveCfg = Release|Win32
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|ARM64.ActiveCfg = Release|ARM64
-		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|ARM64.Build.0 = Release|ARM64
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|x64.ActiveCfg = Release|x64
-		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|x64.Build.0 = Release|x64
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|x86.ActiveCfg = Release|Win32
-		{37C995E0-2349-4154-8E77-4A52C0C7F46D}.Release|x86.Build.0 = Release|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.AuditMode|ARM.ActiveCfg = AuditMode|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.AuditMode|ARM64.ActiveCfg = Release|ARM64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.AuditMode|x64.ActiveCfg = Release|x64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.AuditMode|x86.ActiveCfg = Release|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Debug|Any CPU.ActiveCfg = Debug|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Debug|ARM.ActiveCfg = Debug|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Debug|x64.ActiveCfg = Debug|x64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Debug|x86.ActiveCfg = Debug|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Fuzzing|ARM.ActiveCfg = Fuzzing|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Release|Any CPU.ActiveCfg = Release|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Release|ARM.ActiveCfg = Release|Win32
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Release|ARM64.ActiveCfg = Release|ARM64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Release|x64.ActiveCfg = Release|x64
+		{2C836962-9543-4CE5-B834-D28E1F124B66}.Release|x86.ActiveCfg = Release|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.AuditMode|Any CPU.ActiveCfg = AuditMode|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.AuditMode|ARM.ActiveCfg = AuditMode|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.AuditMode|ARM64.ActiveCfg = Release|ARM64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.AuditMode|x64.ActiveCfg = Release|x64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.AuditMode|x86.ActiveCfg = Release|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Debug|Any CPU.ActiveCfg = Debug|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Debug|ARM.ActiveCfg = Debug|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Debug|x64.ActiveCfg = Debug|x64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Debug|x86.ActiveCfg = Debug|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Fuzzing|Any CPU.ActiveCfg = Fuzzing|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Fuzzing|ARM.ActiveCfg = Fuzzing|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Fuzzing|ARM64.ActiveCfg = Fuzzing|ARM64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Fuzzing|x64.ActiveCfg = Fuzzing|x64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Fuzzing|x86.ActiveCfg = Fuzzing|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Release|Any CPU.ActiveCfg = Release|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Release|ARM.ActiveCfg = Release|Win32
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Release|ARM64.ActiveCfg = Release|ARM64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Release|x64.ActiveCfg = Release|x64
+		{328729E9-6723-416E-9C98-951F1473BBE1}.Release|x86.ActiveCfg = Release|Win32
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE
@@ -2856,7 +2864,6 @@ Global
 		{05500DEF-2294-41E3-AF9A-24E580B82836} = {89CDCC5C-9F53-4054-97A4-639D99F169CD}
 		{1E4A062E-293B-4817-B20D-BF16B979E350} = {89CDCC5C-9F53-4054-97A4-639D99F169CD}
 		{34DE34D3-1CD6-4EE3-8BD9-A26B5B27EC73} = {89CDCC5C-9F53-4054-97A4-639D99F169CD}
-		{84848BFA-931D-42CE-9ADF-01EE54DE7890} = {4DAF0299-495E-4CD1-A982-9BAC16A45932}
 		{376FE273-6B84-4EB5-8B30-8DE9D21B022C} = {4DAF0299-495E-4CD1-A982-9BAC16A45932}
 		{CA5CAD1A-9333-4D05-B12A-1905CBF112F9} = {BDB237B6-1D1D-400F-84CC-40A58FA59C8E}
 		{CA5CAD1A-9A12-429C-B551-8562EC954746} = {59840756-302F-44DF-AA47-441A9D673202}
@@ -2904,6 +2911,8 @@ Global
 		{3C67784E-1453-49C2-9660-483E2CC7F7AD} = {40BD8415-DD93-4200-8D82-498DDDC08CC8}
 		{613CCB57-5FA9-48EF-80D0-6B1E319E20C4} = {A10C4720-DCA4-4640-9749-67F4314F527C}
 		{37C995E0-2349-4154-8E77-4A52C0C7F46D} = {A10C4720-DCA4-4640-9749-67F4314F527C}
+		{2C836962-9543-4CE5-B834-D28E1F124B66} = {A10C4720-DCA4-4640-9749-67F4314F527C}
+		{328729E9-6723-416E-9C98-951F1473BBE1} = {A10C4720-DCA4-4640-9749-67F4314F527C}
 	EndGlobalSection
 	GlobalSection(ExtensibilityGlobals) = postSolution
 		SolutionGuid = {3140B1B7-C8EE-43D1-A772-D82A7061A271}

README.md

@@ -21,7 +21,8 @@ Related repositories include:
 
 ## Installing and running Windows Terminal
 
-> **Note**: Windows Terminal requires Windows 10 2004 (build 19041) or later
+> **Note**\
+> Windows Terminal requires Windows 10 2004 (build 19041) or later
 
 ### Microsoft Store [Recommended]
 
@@ -52,9 +53,10 @@ fails for any reason, you can try the following command at a PowerShell prompt:
 Add-AppxPackage Microsoft.WindowsTerminal_<versionNumber>.msixbundle
 ```
 
-> **Note**: If you install Terminal manually:
+> **Note**\
+> If you install Terminal manually:
 >
-> * You may need to install the [VC++ v14 Desktop Framework Package](https://docs.microsoft.com/troubleshoot/cpp/c-runtime-packages-desktop-bridge#how-to-install-and-update-desktop-framework-packages).  
+> * You may need to install the [VC++ v14 Desktop Framework Package](https://docs.microsoft.com/troubleshoot/cpp/c-runtime-packages-desktop-bridge#how-to-install-and-update-desktop-framework-packages).
 >   This should only be necessary on older builds of Windows 10 and only if you get an error about missing framework packages.
 > * Terminal will not auto-update when new builds are released so you will need
 >   to regularly install the latest Terminal release to receive all the latest
@@ -70,6 +72,9 @@ package:
 winget install --id Microsoft.WindowsTerminal -e
 ```
 
+> **Note**\
+> Due to [a dependency issue](https://github.com/microsoft/terminal/issues/15663), Terminal's current versions cannot be installed via the Windows Package Manager CLI. To install the stable release 1.17 or later, or the Preview release 1.18 or later, please use an alternative installation method.
+
 #### Via Chocolatey (unofficial)
 
 [Chocolatey](https://chocolatey.org) users can download and install the latest
@@ -115,7 +120,7 @@ repository.
 
 ## Windows Terminal Roadmap
 
-The plan for the Windows Terminal [is described here](/doc/roadmap-2022.md) and
+The plan for the Windows Terminal [is described here](/doc/roadmap-2023.md) and
 will be updated as the project proceeds.
 
 ## Project Build Status
@@ -235,7 +240,8 @@ Cause: You're launching the incorrect solution in Visual Studio.
 Solution: Make sure you're building & deploying the `CascadiaPackage` project in
 Visual Studio.
 
-> **Note**: `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic
+> **Note**\
+> `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic
 > Windows Console that hosts Windows' command-line infrastructure. OpenConsole
 > is used by Windows Terminal to connect to and communicate with command-line
 > applications (via
@@ -271,10 +277,10 @@ similar open/closed preexisting issues before creating a new issue.**
 If you would like to ask a question that you feel doesn't warrant an issue
 (yet), please reach out to us via Twitter:
 
-* Kayla Cinnamon, Program Manager:
-  [@cinnamon\_msft](https://twitter.com/cinnamon_msft)
+* Christopher Nguyen, Product Manager:
+  [@nguyen_dows](https://twitter.com/nguyen_dows)
 * Dustin Howett, Engineering Lead: [@dhowett](https://twitter.com/DHowett)
-* Mike Griese, Senior Developer: [@zadjii](https://twitter.com/zadjii)
+* Mike Griese, Senior Developer: [@zadjii@mastodon.social](https://mastodon.social/@zadjii)
 * Carlos Zamora, Developer: [@cazamor_msft](https://twitter.com/cazamor_msft)
 * Pankaj Bhojwani, Developer
 * Leonard Hecker, Developer: [@LeonardHecker](https://twitter.com/LeonardHecker)

build/Helix/ConvertWttLogToXUnit.ps1

@@ -20,9 +20,7 @@ Param(
 $helixResultsContainerUri = $Env:HELIX_RESULTS_CONTAINER_URI
 $helixResultsContainerRsas = $Env:HELIX_RESULTS_CONTAINER_RSAS
 
-$rerunPassesRequiredToAvoidFailure = $env:rerunPassesRequiredToAvoidFailure
-
 Add-Type -Language CSharp -ReferencedAssemblies System.Xml,System.Xml.Linq,System.Runtime.Serialization,System.Runtime.Serialization.Json (Get-Content $PSScriptRoot\HelixTestHelpers.cs -Raw)
 
 $testResultParser = [HelixTestHelpers.TestResultParser]::new($TestNamePrefix, $helixResultsContainerUri, $helixResultsContainerRsas)
-$testResultParser.ConvertWttLogToXUnitLog($WttInputPath, $WttSingleRerunInputPath, $WttMultipleRerunInputPath, $XUnitOutputPath, $rerunPassesRequiredToAvoidFailure)
+$testResultParser.ConvertWttLogToXUnitLog($WttInputPath, $WttSingleRerunInputPath, $WttMultipleRerunInputPath, $XUnitOutputPath)

build/Helix/HelixTestHelpers.cs

@@ -20,32 +20,13 @@ namespace HelixTestHelpers
         public string Name { get; set; }
         public string SourceWttFile { get; set; }
         public bool Passed { get; set; }
+        public bool Skipped { get; set; }
         public bool CleanupPassed { get; set; }
         public TimeSpan ExecutionTime { get; set; }
         public string Details { get; set; }
 
         public List<string> Screenshots { get; private set; }
         public List<TestResult> RerunResults { get; private set; }
-
-        // Returns true if the test pass rate is sufficient to avoid being counted as a failure.
-        public bool PassedOrUnreliable(int requiredNumberOfPasses)
-        {
-            if(Passed)
-            {
-                return true;
-            }
-            else
-            {
-                if(RerunResults.Count == 1)
-                {
-                    return RerunResults[0].Passed;
-                }
-                else
-                {
-                    return RerunResults.Where(r => r.Passed).Count() >= requiredNumberOfPasses;
-                }
-            }
-        }
     }
     
     //
@@ -221,7 +202,9 @@ namespace HelixTestHelpers
                         testsExecuting--;
 
                         // If any inner test fails, we'll still fail the outer
-                        currentResult.Passed &= element.Attribute("Result").Value == "Pass";
+                        var value = element.Attribute("Result").Value;
+                        currentResult.Passed = value == "Pass";
+                        currentResult.Skipped = value == "Skipped";
 
                         // Only gather execution data if this is the outer test we ran initially
                         if (testsExecuting == 0)
@@ -498,7 +481,7 @@ namespace HelixTestHelpers
             return subResultsJsonByMethod;
         }
 
-        public void ConvertWttLogToXUnitLog(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath, string xunitOutputPath, int requiredPassRateThreshold)
+        public void ConvertWttLogToXUnitLog(string wttInputPath, string wttSingleRerunInputPath, string wttMultipleRerunInputPath, string xunitOutputPath)
         {
             TestPass testPass = TestPass.ParseTestWttFileWithReruns(wttInputPath, wttSingleRerunInputPath, wttMultipleRerunInputPath, cleanupFailuresAreRegressions: true, truncateTestNames: false);
             var results = testPass.TestResults;
@@ -510,8 +493,8 @@ namespace HelixTestHelpers
             // If the test failed sufficiently often enough for it to count as a failed test (determined by a property on the
             // Azure DevOps job), we'll later mark it as failed during test results processing.
 
-            int failedCount = results.Where(r => !r.PassedOrUnreliable(requiredPassRateThreshold)).Count();
-            int skippedCount = results.Where(r => !r.Passed && r.PassedOrUnreliable(requiredPassRateThreshold)).Count();
+            int failedCount = results.Where(r => !r.Passed).Count();
+            int skippedCount = results.Where(r => (!r.Passed && r.Skipped)).Count();
 
             var root = new XElement("assemblies");
 
@@ -557,12 +540,13 @@ namespace HelixTestHelpers
                 
                 string resultString = string.Empty;
                 
-                if (result.Passed)
+                if (result.Passed && !result.Skipped)
                 {
                     resultString = "Pass";
                 }
-                else if(result.PassedOrUnreliable(requiredPassRateThreshold))
+                else if (result.Skipped)
                 {
+
                     resultString = "Skip";
                 }
                 else
@@ -571,31 +555,25 @@ namespace HelixTestHelpers
                 }
 
                 
-                test.SetAttributeValue("result", resultString);
-
                 if (!result.Passed)
                 {
-                    // If a test failed, we'll have rerun it multiple times.
-                    // We'll save the subresults to a JSON text file that we'll upload to the helix results container -
-                    // this allows it to be as long as we want, whereas the reason field in Azure DevOps has a 4000 character limit.
-                    string subResultsFileName = methodName + "_subresults.json";
-                    string subResultsFilePath = Path.Combine(Path.GetDirectoryName(wttInputPath), subResultsFileName);
-					
-                    if (result.PassedOrUnreliable(requiredPassRateThreshold))
+                    if (result.Skipped)
                     {
                         var reason = new XElement("reason");
-                        reason.Add(new XCData(GetUploadedFileUrl(subResultsFileName, helixResultsContainerUri, helixResultsContainerRsas)));
+                        reason.Add(new XCData("Test skipped"));
                         test.Add(reason);
                     }
-                    else
-                    {
+                    else {
                         var failure = new XElement("failure");
                         var message = new XElement("message");
-						message.Add(new XCData(GetUploadedFileUrl(subResultsFileName, helixResultsContainerUri, helixResultsContainerRsas)));
+                        message.Add(new XCData("Test failed"));
                         failure.Add(message);
                         test.Add(failure);
                     }
                 }
+
+                test.SetAttributeValue("result", resultString);
+
                 collection.Add(test);
             }
 

build/Helix/OutputTestErrorsForAzureDevops.ps1

@@ -0,0 +1,38 @@
+Param(
+    [Parameter(Mandatory = $true)]
+    [string]$XUnitOutputPath
+)
+
+# This script is used to parse the XUnit output from the test runs and print out
+# the tests that failed.
+#
+# Why you might ask? Well, it sure seems like Azure DevOps doesn't like the fact
+# that we just call our tests in a powershell script. It can't seemingly find
+# the actual errors in the TAEF logs. That means when you just go to the
+# "Checks" page on GitHub, the Azure DevOps integration doesn't have anything
+# meaningful to say other than "PowerShell exited with code '1'". If we however,
+# just manually emit the test names formatted with "#[error]" in front of them,
+# well, then the integration will all work like magic.
+
+# Load the test results as a XML object
+$testResults = [xml](Get-Content -Path $XUnitOutputPath)
+
+# Our XML looks like:
+# <assemblies>
+#   <assembly name="MUXControls.Test.dll" test-framework="TAEF" run-date="2023-08-14" run-time="11:38:01" total="524" passed="520" failed="4" skipped="1" time="8943" errors="0">
+#     <collection total="524" passed="520" failed="4" skipped="1" name="Test collection" time="8943">
+#       <test name="ControlCoreTests::TestSimpleClickSelection" type="ControlCoreTests" method="TestSimpleClickSelection" time="0.016" result="Fail">
+
+# Iterate over all the assemblies and print all the tests that failed
+foreach ($assembly in $testResults.assemblies.assembly) {
+    foreach ($collection in $assembly.collection) {
+        foreach ($test in $collection.test) {
+            if ($test.result -eq "Fail") {
+                # This particular format is taken from the Azure DevOps documentation:
+                # https://github.com/microsoft/azure-pipelines-tasks/blob/master/docs/authoring/commands.md
+                # This will treat this line as an error message
+                Write-Output "##vso[task.logissue type=error]$($test.name) Failed"
+            }
+        }
+    }
+}

build/config/esrp.build.batch.wpf.json

@@ -1,7 +1,7 @@
 [
     {
         "MatchedPath": [
-            "PublicTerminalCore.dll"
+            "Microsoft.Terminal.Control/Microsoft.Terminal.Control.dll"
         ],
         "SigningInfo": {
             "Operations": [

build/config/template.appinstaller

@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<AppInstaller
+  xmlns="http://schemas.microsoft.com/appx/appinstaller/2017/2"
+  Version="1.0.0.0"
+  Uri="$$ROOT$$$$NAME$$.appinstaller">
+
+  <MainBundle
+    Name="$$NAME$$"
+    Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+    Version="$$VERSION$$"
+    Uri="$$ROOT$$$$PACKAGE$$" />
+
+  <Dependencies>
+    <Package
+      Name="Microsoft.UI.Xaml.2.8"
+      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+      Version="8.2305.5001.0"
+      ProcessorArchitecture="x64"
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x64.appx" />
+    <Package
+      Name="Microsoft.UI.Xaml.2.8"
+      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+      Version="8.2305.5001.0"
+      ProcessorArchitecture="x86"
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.x86.appx" />
+    <Package
+      Name="Microsoft.UI.Xaml.2.8"
+      Publisher="CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=Washington, C=US"
+      Version="8.2305.5001.0"
+      ProcessorArchitecture="arm64"
+      Uri="https://github.com/microsoft/microsoft-ui-xaml/releases/download/v2.8.4/Microsoft.UI.Xaml.2.8.arm64.appx" />
+  </Dependencies>
+
+  <UpdateSettings>
+    <OnLaunch
+      HoursBetweenUpdateChecks="6" />
+  </UpdateSettings>
+</AppInstaller>

build/pgo/Terminal.PGO.props

@@ -9,7 +9,7 @@
 
   <PropertyGroup>
     <!-- Optional, defaults to main.  Name of the branch which will be used for calculating branch point. -->
-    <PGOBranch>release-1.18</PGOBranch>
+    <PGOBranch>release-1.19</PGOBranch>
 
     <!-- Mandatory.  Name of the NuGet package which will contain PGO databases for consumption by build system. -->
     <PGOPackageName>Microsoft.Internal.Windows.Terminal.PGODatabase</PGOPackageName>

build/pipelines/daily-loc-submission.yml

@@ -8,12 +8,6 @@ schedules:
         - main
     always: false # only run if there's code changes!
 
-
-parameters:
-  - name: targetBranch
-    type: string
-    default: "automated/loc-update"
-
 pool:
   vmImage: windows-2019
 
@@ -44,13 +38,6 @@ steps:
   persistCredentials: true
   path: s/Terminal.Internal
 
-- pwsh: |-
-    Install-Module PSGitHub -Scope CurrentUser -Force
-    git config --local user.email "consvc@microsoft.com"
-    git config --local user.name "Console Service Bot"
-    git config --local core.autocrlf true
-  displayName: Prepare git submission environment
-
 - task: MicrosoftTDBuild.tdbuild-task.tdbuild-task.TouchdownBuildTask@1
   displayName: 'Touchdown Build - 7105, PRODEXT'
   inputs:
@@ -64,44 +51,13 @@ steps:
     outputDirectoryRoot: LocOutput
     appendRelativeDir: true
     pseudoSetting: Included
-    localizationTarget: true
 
-- pwsh: |-
-    Remove-Item -EA:Ignore -R -Force LocOutput\Terminal.Internal
-    $Files = Get-ChildItem LocOutput -R -Include 'ContextMenu.resw','Resources.resw' | ? FullName -Like '*en-US\*\*.resw'
-    $Files | % { Move-Item -Verbose $_.Directory $_.Directory.Parent.Parent -EA:Ignore }
-    & tar.exe -c -f LocOutputMunged.tar -C LocOutput .
-    & tar.exe -x -v -f LocOutputMunged.tar
-    rm LocOutputMunged.tar
-    rm -r -fo LocOutput
-    & ./build/scripts/Copy-ContextMenuResourcesToCascadiaPackage.ps1
-  displayName: Move Loc files to the right places
+# Saving one of these makes it really easy to inspect the loc output...
+- powershell: 'tar czf LocOutput.tar.gz LocOutput'
+  displayName: 'Archive Loc Output for Submission'
 
-- pwsh: |-
-    git add **/*.resw
-    git status
-    git diff --quiet --cached --exit-code
-    If ($LASTEXITCODE -Ne 0) {
-      $Now = Get-Date
-      git commit -m "Localization Updates - $Now"
-      git push origin HEAD:refs/heads/${{parameters.targetBranch}} -f
-      Write-Host "##vso[task.setvariable variable=ChangesPushedToRepo]1"
-    } Else {
-      Write-Host "##vso[task.setvariable variable=ChangesPushedToRepo]0"
-    }
-  displayName: git commit and push
-
-- pwsh: |-
-    Import-Module PSGitHub
-    $BaseBranch = "$(Build.SourceBranch)" -Replace "^refs/heads/",""
-    Write-Host "Preparing PR against $BaseBranch"
-    $PSDefaultParameterValues['*GitHub*:Owner'] = "microsoft"
-    $PSDefaultParameterValues['*GitHub*:RepositoryName'] = "terminal"
-    $PSDefaultParameterValues['*GitHub*:Token'] = ("$(GithubPullRequestToken)" | ConvertTo-SecureString -AsPlainText -Force)
-    $existingPr = Get-GitHubPullRequest -HeadBranch "${{parameters.targetBranch}}" -BaseBranch $BaseBranch
-    If ($null -Eq $existingPr) {
-      $Now = Get-Date
-      New-GitHubPullRequest -Head "${{parameters.targetBranch}}" -Base $BaseBranch -Title "Localization Updates - $BaseBranch - $Now" -Verbose
-    }
-  displayName: Publish pull request
-  condition: and(eq(variables['ChangesPushedToRepo'], '1'), succeeded())
+- task: PublishBuildArtifacts@1
+  displayName: 'Publish Artifact: LocOutput'
+  inputs:
+    PathtoPublish: LocOutput.tar.gz
+    ArtifactName: LocOutput

build/pipelines/nightly.yml

@@ -10,6 +10,12 @@ schedules:
 
 name: $(BuildDefinitionName)_$(date:yyMM).$(date:dd)$(rev:rrr)
 
+parameters:
+  - name: publishToAzure
+    displayName: "Deploy to **PUBLIC** Azure Storage"
+    type: boolean
+    default: true
+
 extends:
   template: templates-v2\pipeline-full-release-build.yml
   parameters:
@@ -21,3 +27,17 @@ extends:
     publishSymbolsToPublic: true
     publishVpackToWindows: false
     symbolExpiryTime: 15 # Nightly builds do not keep symbols for very long!
+    ${{ if eq(true, parameters.publishToAzure) }}:
+      extraPublishJobs:
+        - template: job-deploy-to-azure-storage.yml
+          parameters:
+            pool:
+              name: SHINE-INT-S
+            dependsOn: [PublishSymbols]
+            storagePublicRootURL: $(AppInstallerRootURL)
+            subscription: $(AzureSubscriptionName)
+            storageAccount: $(AzureStorageAccount)
+            storageContainer: $(AzureStorageContainer)
+            buildConfiguration: Release
+            environment: production-canary
+

build/pipelines/release.yml

@@ -10,6 +10,7 @@ parameters:
     values:
       - Release
       - Preview
+      - Canary
       - Dev
   - name: buildTerminal
     displayName: "Build Windows Terminal MSIX"

build/pipelines/templates-v2/job-build-project.yml

@@ -117,7 +117,7 @@ jobs:
           $SignFragments += "wpfdotnet"
         }
         If ([bool]::Parse("${{ parameters.buildWPF }}")) {
-          $BuildTargets += "Terminal\wpf\PublicTerminalCore"
+          $BuildTargets += "Terminal\Control\Microsoft_Terminal_Control"
           $SignFragments += "wpf"
         }
         If ([bool]::Parse("${{ parameters.buildConPTY }}")) {

build/pipelines/templates-v2/job-deploy-to-azure-storage.yml

@@ -0,0 +1,70 @@
+parameters:
+  - name: buildConfiguration
+    type: string
+  - name: pool
+    type: object
+    default: []
+  - name: dependsOn
+    type: object
+    default: null
+  - name: artifactStem
+    type: string
+    default: ''
+  - name: variables
+    type: object
+    default: {}
+  - name: environment
+    type: string
+  - name: storagePublicRootURL
+    type: string
+  - name: subscription
+    type: string
+  - name: storageAccount
+    type: string
+  - name: storageContainer
+    type: string
+
+jobs:
+- deployment: DeployAzure
+  ${{ if ne(length(parameters.pool), 0) }}:
+    pool: ${{ parameters.pool }}
+  displayName: Publish to Azure Storage (Prod)
+  dependsOn: ${{ parameters.dependsOn }}
+  variables:
+    ${{ insert }}: ${{ parameters.variables }}
+  environment: ${{ parameters.environment }}
+  strategy:
+    runOnce:
+      deploy:
+        steps:
+        - download: none
+
+        - checkout: self
+          clean: true
+          fetchDepth: 1
+          fetchTags: false # Tags still result in depth > 1 fetch; we don't need them here
+          submodules: true
+          persistCredentials: True
+
+        - task: DownloadPipelineArtifact@2
+          displayName: Download MSIX Bundle Artifact
+          inputs:
+            artifactName: appxbundle-${{ parameters.buildConfiguration }}${{ parameters.artifactStem }}
+            downloadPath: '$(Build.SourcesDirectory)/_out'
+            itemPattern: '**/*.msixbundle'
+
+        - pwsh: |-
+            $b = Get-Item _out/*.msixbundle
+            ./build/scripts/New-AppInstallerFromTemplateAndBundle.ps1 -BundlePath $b.FullName -AppInstallerTemplatePath ./build/config/template.appinstaller -AppInstallerRoot "${{ parameters.storagePublicRootURL }}" -OutputPath _out/Microsoft.WindowsTerminalCanary.appinstaller
+          displayName: "Produce AppInstaller for MSIX bundle"
+
+        - task: AzureFileCopy@5
+          displayName: Publish to Storage Account
+          inputs:
+            sourcePath: _out/*
+            Destination: AzureBlob
+            azureSubscription: ${{ parameters.subscription }}
+            storage: ${{ parameters.storageAccount }}
+            ContainerName: ${{ parameters.storageContainer }}
+            AdditionalArgumentsForBlobCopy: "--content-type application/octet-stream"
+

build/pipelines/templates-v2/job-merge-msix-into-bundle.yml

@@ -51,6 +51,8 @@ jobs:
       BundleStemName: Microsoft.WindowsTerminal
     ${{ elseif eq(parameters.branding, 'Preview') }}:
       BundleStemName: Microsoft.WindowsTerminalPreview
+    ${{ elseif eq(parameters.branding, 'Canary') }}:
+      BundleStemName: Microsoft.WindowsTerminalCanary
     ${{ else }}:
       BundleStemName: WindowsTerminalDev
     JobOutputDirectory: '$(System.ArtifactsDirectory)/bundle'

build/pipelines/templates-v2/job-pgo-build-nuget-and-publish.yml

@@ -43,7 +43,7 @@ jobs:
 
   - template: steps-ensure-nuget-version.yml
 
-  - task: NuGetAuthenticate@1
+  - task: NuGetAuthenticate@0
     inputs:
       nuGetServiceConnections: 'Terminal Public Artifact Feed'
 

build/pipelines/templates-v2/job-test-project.yml

@@ -64,6 +64,14 @@ jobs:
       filePath: build\Helix\ConvertWttLogToXUnit.ps1
       arguments: -WttInputPath '${{ parameters.testLogPath }}' -WttSingleRerunInputPath 'unused.wtl' -WttMultipleRerunInputPath 'unused2.wtl' -XUnitOutputPath 'onBuildMachineResults.xml' -TestNamePrefix '$(BuildConfiguration).$(BuildPlatform)'
 
+  - task: PowerShell@2
+    displayName: 'Manually log test failures'
+    condition: always()
+    inputs:
+      targetType: filePath
+      filePath: build\Helix\OutputTestErrorsForAzureDevops.ps1
+      arguments: -XUnitOutputPath 'onBuildMachineResults.xml'
+
   - task: PublishTestResults@2
     displayName: 'Upload converted test logs'
     condition: always()

build/pipelines/templates-v2/pipeline-full-release-build.yml

@@ -51,6 +51,9 @@ parameters:
     type: boolean
     default: false
 
+  - name: extraPublishJobs
+    type: object
+    default: []
   - name: pool
     type: object
     default:
@@ -101,6 +104,10 @@ stages:
                 packageListDownload: e82d490c-af86-4733-9dc4-07b772033204
                 versionListDownload: ${{ parameters.terminalInternalPackageVersion }}
 
+            - template: ./steps-fetch-and-prepare-localizations.yml
+              parameters:
+                includePseudoLoc: true
+
       - ${{ if eq(parameters.buildWPF, true) }}:
         # Add an Any CPU build flavor for the WPF control bits
         - template: ./job-build-project.yml
@@ -170,4 +177,5 @@ stages:
           includePublicSymbolServer: ${{ parameters.publishSymbolsToPublic }}
           symbolExpiryTime: ${{ parameters.symbolExpiryTime }}
 
+      - ${{ parameters.extraPublishJobs }}
 ...

build/pipelines/templates-v2/pipeline-onebranch-full-release-build.yml

@@ -125,6 +125,10 @@ extends:
                     packageListDownload: e82d490c-af86-4733-9dc4-07b772033204
                     versionListDownload: ${{ parameters.terminalInternalPackageVersion }}
 
+                - template: ./build/pipelines/templates-v2/steps-fetch-and-prepare-localizations.yml@self
+                  parameters:
+                    includePseudoLoc: true
+
           - ${{ if eq(parameters.buildWPF, true) }}:
             # Add an Any CPU build flavor for the WPF control bits
             - template: ./build/pipelines/templates-v2/job-build-project.yml@self
@@ -235,7 +239,7 @@ extends:
 
       - stage: Publish
         displayName: Publish
-        dependsOn: [Build, Package]
+        dependsOn: [Build]
         jobs:
           - template: ./build/pipelines/templates-v2/job-publish-symbols.yml@self
             parameters:

build/pipelines/templates-v2/steps-fetch-and-prepare-localizations.yml

@@ -0,0 +1,27 @@
+parameters:
+  - name: includePseudoLoc
+    type: boolean
+    default: true
+
+steps:
+  - task: TouchdownBuildTask@1
+    displayName: Download Localization Files
+    inputs:
+      teamId: 7105
+      authId: $(TouchdownAppId)
+      authKey: $(TouchdownAppKey)
+      resourceFilePath: |
+        src\cascadia\**\en-US\*.resw
+      appendRelativeDir: true
+      localizationTarget: false
+      ${{ if eq(parameters.includePseudoLoc, true) }}:
+        pseudoSetting: Included
+
+  - pwsh: |-
+      $Files = Get-ChildItem . -R -Filter 'Resources.resw' | ? FullName -Like '*en-US\*\Resources.resw'
+      $Files | % { Move-Item -Verbose $_.Directory $_.Directory.Parent.Parent -EA:Ignore }
+    displayName: Move Loc files into final locations
+
+  - pwsh: |-
+      ./build/scripts/Copy-ContextMenuResourcesToCascadiaPackage.ps1
+    displayName: Copy the Context Menu Loc Resources to CascadiaPackage

build/pipelines/templates-v2/steps-restore-nuget.yml

@@ -1,7 +1,7 @@
 steps:
 - template: steps-ensure-nuget-version.yml
 
-- task: NuGetAuthenticate@1
+- task: NuGetAuthenticate@0
 
 - script: |-
     echo ##vso[task.setvariable variable=NUGET_RESTORE_MSBUILD_ARGS]/p:Platform=$(BuildPlatform)

build/rules/Branding.targets

@@ -1,6 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?>
 <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
   <PropertyGroup>
+    <_WTBrandingPreprocessorToken Condition="'$(WindowsTerminalBranding)'=='Canary'">WT_BRANDING_CANARY</_WTBrandingPreprocessorToken>
     <_WTBrandingPreprocessorToken Condition="'$(WindowsTerminalBranding)'=='Preview'">WT_BRANDING_PREVIEW</_WTBrandingPreprocessorToken>
     <_WTBrandingPreprocessorToken Condition="'$(WindowsTerminalBranding)'=='Release'">WT_BRANDING_RELEASE</_WTBrandingPreprocessorToken>
     <_WTBrandingPreprocessorToken Condition="'$(_WTBrandingPreprocessorToken)'==''">WT_BRANDING_DEV</_WTBrandingPreprocessorToken>

build/rules/GenerateSxsManifestsFromWinmds.targets

@@ -30,7 +30,7 @@
           DependsOnTargets="_ConsoleMapWinmdsToManifestFiles">
 
     <!-- This target is batched and a new Exec is spawned for each entry in _ConsoleWinmdManifest. -->
-    <Exec Command="mt.exe -winmd:%(_ConsoleWinmdManifest.WinMDPath) -dll:%(_ConsoleWinmdManifest.Implementation) -out:%(_ConsoleWinmdManifest.Identity)" />
+    <Exec Command="mt.exe -winmd:&quot;%(_ConsoleWinmdManifest.WinMDPath)&quot; -dll:%(_ConsoleWinmdManifest.Implementation) -out:&quot;%(_ConsoleWinmdManifest.Identity)&quot;" />
 
     <ItemGroup>
       <!-- Emit the generated manifest into the Link inputs. -->

build/scripts/Copy-ContextMenuResourcesToCascadiaPackage.ps1

@@ -10,12 +10,11 @@ $LocalizationsFromContextMenu | ForEach-Object {
 ForEach ($pair in $Languages.GetEnumerator()) {
 	$LanguageDir = "./src/cascadia/CascadiaPackage/Resources/$($pair.Key)"
 	$ResPath = "$LanguageDir/Resources.resw"
-	$XmlDocument = $null
 	$PreexistingResw = Get-Item $ResPath -EA:Ignore
 	If ($null -eq $PreexistingResw) {
 		Write-Host "Copying $($pair.Value.FullName) to $ResPath"
-		$XmlDocument = [xml](Get-Content $pair.Value.FullName)
 		New-Item -type Directory $LanguageDir -EA:Ignore
+		Copy-Item $pair.Value.FullName $ResPath
 	} Else {
 		# Merge Them!
 		Write-Host "Merging $($pair.Value.FullName) into $ResPath"
@@ -30,19 +29,6 @@ ForEach ($pair in $Languages.GetEnumerator()) {
 		$newXml.root.data | % {
 			$null = $existingXml.root.AppendChild($existingXml.ImportNode($_, $true))
 		}
-		$XmlDocument = $existingXml # (which has been updated)
+		$existingXml.Save($PreexistingResw.FullName)
 	}
-
-	# Reset paths to be absolute (for .NET)
-	$LanguageDir = (Get-Item $LanguageDir).FullName
-	$ResPath = "$LanguageDir/Resources.resw"
-	# Force the "new" and "preexisting" paths to serialize with XmlWriter,
-	# to ensure consistency.
-	$writerSettings = [System.Xml.XmlWriterSettings]::new()
-	$writerSettings.NewLineChars = "`r`n"
-	$writerSettings.Indent = $true
-	$writer = [System.Xml.XmlWriter]::Create($ResPath, $writerSettings)
-	$XmlDocument.Save($writer)
-	$writer.Flush()
-	$writer.Close()
 }

build/scripts/Invoke-FormattingCheck.ps1

@@ -10,7 +10,7 @@ function Invoke-CheckBadCodeFormatting() {
 
     # returns a non-zero exit code if there are any diffs in the tracked files in the repo
     git diff-index --quiet HEAD --
-    if ($lastExitCode -eq 1) {
+    if ($LASTEXITCODE -eq 1) {
 
         # Write the list of files that need updating to the log
         git diff-index --name-only HEAD

build/scripts/New-AppInstallerFromTemplateAndBundle.ps1

@@ -0,0 +1,42 @@
+[CmdletBinding()]
+Param(
+    [Parameter(Mandatory,
+      HelpMessage="Path to the .msixbundle")]
+    [string]
+    $BundlePath,
+
+    [Parameter(Mandatory,
+      HelpMessage="Path to the .appinstaller template")]
+    [string]
+    $AppInstallerTemplatePath,
+
+    [string]
+    $AppInstallerRoot,
+
+    [Parameter(Mandatory,
+      HelpMessage="Output Path")]
+    [string]
+    $OutputPath
+)
+
+$ErrorActionPreference = "Stop"
+
+$sentinelFile = New-TemporaryFile
+$directory = New-Item -Type Directory "$($sentinelFile.FullName)_Package"
+Remove-Item $sentinelFile -Force -EA:Ignore
+
+$bundle = (Get-Item $BundlePath)
+& tar.exe -x -f $bundle.FullName -C $directory AppxMetadata/AppxBundleManifest.xml
+
+$xml = [xml](Get-Content (Join-Path $directory "AppxMetadata\AppxBundleManifest.xml"))
+$name = $xml.Bundle.Identity.Name
+$version = $xml.Bundle.Identity.Version
+
+$doc = (Get-Content -ReadCount 0 $AppInstallerTemplatePath)
+$doc = $doc -Replace '\$\$ROOT\$\$',$AppInstallerRoot
+$doc = $doc -Replace '\$\$NAME\$\$',$name
+$doc = $doc -Replace '\$\$VERSION\$\$',$version
+$doc = $doc -Replace '\$\$PACKAGE\$\$',$bundle.Name
+$doc | Out-File -Encoding utf8NoBOM $OutputPath
+
+Get-Item $OutputPath

custom.props

@@ -5,7 +5,7 @@
     <XesUseOneStoreVersioning>true</XesUseOneStoreVersioning>
     <XesBaseYearForStoreVersion>2023</XesBaseYearForStoreVersion>
     <VersionMajor>1</VersionMajor>
-    <VersionMinor>18</VersionMinor>
+    <VersionMinor>19</VersionMinor>
     <VersionInfoProductName>Windows Terminal</VersionInfoProductName>
   </PropertyGroup>
 </Project>

doc/COOKED_READ_DATA.md

@@ -0,0 +1,96 @@
+# COOKED_READ_DATA, aka conhost's readline implementation
+
+## Test instructions
+
+All of the following ✅ marks must be fulfilled during manual testing:
+* ASCII input
+* Chinese input (中文維基百科) ❔
+  * Resizing the window properly wraps/unwraps wide glyphs ❌
+    Broken due to `TextBuffer::Reflow` bugs
+* Surrogate pair input (🙂) ❔
+  * Resizing the window properly wraps/unwraps surrogate pairs ❌
+    Broken due to `TextBuffer::Reflow` bugs
+* In cmd.exe
+  * Create 2 file: "a😊b.txt" and "a😟b.txt"
+  * Press tab: Autocomplete to "a😊b.txt" ✅
+  * Navigate the cursor right past the "a"
+  * Press tab twice: Autocomplete to "a😟b.txt" ✅
+* Execute `printf("    "); gets(buffer);` in C (or equivalent)
+  * Press Tab, A, Ctrl+V, Tab, A ✅
+  * The prompt is "        A^V     A" ✅
+  * Cursor navigation works ✅
+  * Backspacing/Deleting random parts of it works ✅
+  * It never deletes the initial 4 spaces ✅
+* Backspace deletes preceding glyphs ✅
+* Ctrl+Backspace deletes preceding words ✅
+* Escape clears input ✅
+* Home navigates to start ✅
+* Ctrl+Home deletes text between cursor and start ✅
+* End navigates to end ✅
+* Ctrl+End deletes text between cursor and end ✅
+* Left navigates over previous code points ✅
+* Ctrl+Left navigates to previous word-starts ✅
+* Right and F1 navigate over next code points ✅
+  * Pressing right at the end of input copies characters
+    from the previous command ✅
+* Ctrl+Right navigates to next word-ends ✅
+* Insert toggles overwrite mode ✅
+* Delete deletes next code point ✅
+* Up and F5 cycle through history ✅
+  * Doesn't crash with no history ✅
+  * Stops at first entry ✅
+* Down cycles through history ✅
+  * Doesn't crash with no history ✅
+  * Stops at last entry ✅
+* PageUp retrieves the oldest command ✅
+* PageDown retrieves the newest command ✅
+* F2 starts "copy to char" prompt ✅
+  * Escape dismisses prompt ✅
+  * Typing a character copies text from the previous command up
+    until that character into the current buffer (acts identical
+    to F3, but with automatic character search) ✅
+* F3 copies the previous command into the current buffer,
+  starting at the current cursor position,
+  for as many characters as possible ✅
+  * Doesn't erase trailing text if the current buffer
+    is longer than the previous command ✅
+  * Puts the cursor at the end of the copied text ✅
+* F4 starts "copy from char" prompt ✅
+  * Escape dismisses prompt ✅
+  * Erases text between the current cursor position and the
+    first instance of a given char (but not including it) ✅
+* F6 inserts Ctrl+Z ✅
+* F7 without modifiers starts "command list" prompt ✅
+  * Escape dismisses prompt ✅
+  * Minimum size of 40x10 characters ✅
+  * Width expands to fit the widest history command ✅
+  * Height expands up to 20 rows with longer histories ✅
+  * F9 starts "command number" prompt ✅
+  * Left/Right paste replace the buffer with the given command ✅
+    * And put cursor at the end of the buffer ✅
+  * Up/Down navigate selection through history ✅
+    * Stops at start/end with <10 entries ✅
+    * Stops at start/end with >20 entries ✅
+    * Wide text rendering during pagination with >20 entries ✅
+  * Shift+Up/Down moves history items around ✅
+  * Home navigates to first entry ✅
+  * End navigates to last entry ✅
+  * PageUp navigates by 20 items at a time or to first ✅
+  * PageDown navigates by 20 items at a time or to last ✅
+* Alt+F7 clears command history ✅
+* F8 cycles through commands that start with the same text as
+  the current buffer up until the current cursor position ✅
+  * Doesn't crash with no history ✅
+* F9 starts "command number" prompt ✅
+  * Escape dismisses prompt ✅
+  * Ignores non-ASCII-decimal characters ✅
+  * Allows entering between 1 and 5 digits ✅
+  * Pressing Enter fetches the given command from the history ✅
+* Alt+F10 clears doskey aliases ✅
+* In cmd.exe, with an empty prompt in an empty directory:
+  Pressing tab produces an audible bing and prints no text ✅
+* When Narrator is enabled, in cmd.exe:
+  * Typing individual characters announces only
+    exactly each character that is being typed ✅
+  * Backspacing at the end of a prompt announces
+    only exactly each deleted character ✅

doc/Niksa.md

@@ -27,6 +27,8 @@ I would highly recommend that Gulp convert to using PowerShell scripts and that
 
 Original Source: https://github.com/microsoft/terminal/issues/217#issuecomment-404240443
 
+_Addendum_: cmd.exe is the literal embodiment of [xkcd#1172]([url](https://xkcd.com/1172/)). Every change, no matter how small, will break _someone_. 
+
 ## <a name="screenPerf"></a>Why is typing-to-screen performance better than every other app?
 
 I really do not mind when someone comes by and decides to tell us that we're doing a good job at something. We hear so many complaints every day that a post like this is a breath of fresh air. Thanks for your thanks!

doc/ORGANIZATION.md

@@ -32,7 +32,6 @@
 		* `/src/cascadia/TerminalApp` - This DLL represents the implementation of the Windows Terminal application. This includes parsing settings, hosting tabs & panes with Terminals in them, and displaying other UI elements. This DLL is almost entirely UWP-like code, and shouldn't be doing any Win32-like UI work.
 		* `/src/cascadia/WindowsTerminal` - This EXE provides Win32 hosting for the TerminalApp. It will set up XAML islands, and is responsible for drawing the window, either as a standard window or with content in the titlebar (non-client area).
 		* `/src/cascadia/CascadiaPackage` - This is a project for packaging the Windows Terminal and its dependencies into an .appx/.msix for deploying to the machine.
-		* `/src/cascadia/PublicTerminalCore` - This is a DLL wrapper for the TerminalCore and Renderer, similar to `TermControl`, which exposes some exported functions that so the Terminal can be used from C#.
 		* `/src/cascadia/WpfTerminalControl` - A DLL implementing a WPF version of the Terminal Control.
 	* `/src/host` – The meat of the windows console host. This includes buffer, input, output, windowing, server management, clipboard, and most interactions with the console host window that aren’t stated anywhere else. We’re trying to pull things out that are reusable into other libraries, but it’s a work in progress
 		* `/src/host/lib` – Builds the reusable LIB copy of the host

doc/cascadia/profiles.schema.json

@@ -85,6 +85,32 @@
         }
       ]
     },
+    "BuiltinSuggestionSource": {
+      "enum": [
+        "commandHistory",
+        "tasks",
+        "all"
+      ],
+      "type": "string"
+    },
+    "SuggestionSource": {
+      "default": "all",
+      "description": "Either a single suggestion source, or an array of sources to concatenate. Built-in sources include `commandHistory`, `directoryHistory`, and `tasks`. The special value `all` indicates all suggestion sources should be included",
+      "$comment": "`tasks` and `local` are sources that would be added by the Tasks feature, as a follow-up",
+      "oneOf": [
+        {
+          "type": [ "string", "null", "BuiltinSuggestionSource" ]
+        },
+        {
+          "type": "array",
+          "items": { "type": "BuiltinSuggestionSource" }
+        },
+        {
+          "type": "array",
+          "items": { "type": "string" }
+        }
+      ]
+    },
     "AppearanceConfig": {
       "properties": {
         "colorScheme": {
@@ -243,6 +269,17 @@
         "experimental.pixelShaderPath": {
           "description": "Use to set a path to a pixel shader to use with the Terminal when unfocused. Overrides `experimental.retroTerminalEffect`. This is an experimental feature, and its continued existence is not guaranteed.",
           "type": "string"
+        },
+        "useAcrylic":{
+          "description": "When set to true, the window will have an acrylic material background when unfocused. When set to false, the window will have a plain, untextured background when unfocused.",
+          "type": "boolean"
+        },
+        "opacity": {
+          "default": 100,
+          "description": "Sets the opacity of the window for the profile when unfocused. Accepts values from 0-100.",
+          "maximum": 100,
+          "minimum": 0,
+          "type": "number"
         }
       },
       "type": "object"
@@ -348,8 +385,12 @@
     },
     "ShortcutActionName": {
       "enum": [
+        "addMark",
         "adjustFontSize",
+        "adjustOpacity",
+        "clearAllMarks",
         "clearBuffer",
+        "clearMark",
         "closeOtherPanes",
         "closeOtherTabs",
         "closePane",
@@ -360,6 +401,7 @@
         "copy",
         "duplicateTab",
         "expandSelectionToWord",
+        "experimental.colorSelection",
         "exportBuffer",
         "find",
         "findMatch",
@@ -367,62 +409,60 @@
         "globalSummon",
         "identifyWindow",
         "identifyWindows",
+        "markMode",
         "moveFocus",
         "movePane",
-        "swapPane",
-        "markMode",
         "moveTab",
         "multipleActions",
         "newTab",
         "newWindow",
         "nextTab",
+        "openAbout",
         "openNewTabDropdown",
         "openSettings",
+        "openSystemMenu",
         "openTabColorPicker",
+        "openTabRenamer",
         "openWindowRenamer",
         "paste",
         "prevTab",
-        "renameTab",
-        "openSystemMenu",
-        "openTabRenamer",
         "quakeMode",
+        "quit",
+        "renameTab",
+        "renameWindow",
         "resetFontSize",
         "resizePane",
-        "renameWindow",
+        "restoreLastClosed",
         "scrollDown",
         "scrollDownPage",
+        "scrollToBottom",
+        "scrollToMark",
+        "scrollToTop",
         "scrollUp",
         "scrollUpPage",
-        "scrollToBottom",
-        "scrollToTop",
+        "searchWeb",
+        "selectAll",
         "sendInput",
         "setColorScheme",
+        "setFocusMode",
+        "setFullScreen",
+        "setMaximized",
         "setTabColor",
+        "showSuggestions",
         "splitPane",
+        "swapPane",
+        "switchSelectionEndpoint",
         "switchToTab",
         "tabSearch",
         "toggleAlwaysOnTop",
         "toggleBlockSelection",
         "toggleFocusMode",
-        "selectAll",
-        "setFocusMode",
-        "switchSelectionEndpoint",
         "toggleFullscreen",
-        "setFullScreen",
-        "setMaximized",
         "togglePaneZoom",
-        "toggleSplitOrientation",
         "toggleReadOnlyMode",
         "toggleShaderEffects",
+        "toggleSplitOrientation",
         "wt",
-        "quit",
-        "adjustOpacity",
-        "restoreLastClosed",
-        "addMark",
-        "scrollToMark",
-        "clearMark",
-        "clearAllMarks",
-        "experimental.colorSelection",
         "unbound"
       ],
       "type": "string"
@@ -799,6 +839,11 @@
               "default": false,
               "description": "If true, the copied content will be copied as a single line (even if there are hard line breaks present in the text). If false, newlines persist from the selected text."
             },
+            "dismissSelection": {
+              "type": "boolean",
+              "default": true,
+              "description": "If false, the copied content will be copied and the selection will not be dismissed. If true, the selection will be dismissed."
+            },
             "copyFormatting": {
               "default": null,
               "description": "When set to `true`, the color and font formatting of selected text is also copied to your clipboard. When set to `false`, only plain text is copied to your clipboard. An array of specific formats can also be used. Supported array values include `html` and `rtf`. Plain text is always copied. Not setting this value inherits the behavior of the `copyFormatting` global setting.",
@@ -1710,6 +1755,29 @@
         }
       ]
     },
+    "SearchWebAction": {
+      "description": "Search the web for selected text",
+      "allOf": [
+        {
+          "$ref": "#/$defs/ShortcutAction"
+        },
+        {
+          "properties": {
+            "action": {
+              "type": "string",
+              "const": "searchWeb"
+            },
+            "queryUrl": {
+              "type": "string",
+              "description": "URL of the web page to launch, %s is replaced with the selected text"
+            }
+          }
+        }
+      ],
+      "required": [
+        "queryUrl"
+      ]
+    },
     "AdjustOpacityAction": {
       "description": "Changes the opacity of the active Terminal window. If `relative` is specified, then this action will increase/decrease relative to the current opacity.",
       "allOf": [
@@ -1738,6 +1806,30 @@
         }
       ]
     },
+    "ShowSuggestionsAction": {
+      "description": "Arguments corresponding to a Open Suggestions Action",
+      "allOf": [
+        {
+          "$ref": "#/$defs/ShortcutAction"
+        },
+        {
+          "properties": {
+            "action": {
+              "type": "string",
+              "const": "showSuggestions"
+            },
+            "source": {
+              "$ref": "#/$defs/SuggestionSource",
+              "description": "Which suggestion sources to filter."
+            },
+            "useCommandline": {
+              "default": false,
+              "description": "When set to `true`, the current commandline the user has typed will pre-populate the filter of the Suggestions UI. This requires that the user has enabled shell integration in their shell's config. When set to false, the filter will start empty."
+            }
+          }
+        }
+      ]
+    },
     "ShowCloseButton": {
       "enum": [
         "always",
@@ -1814,6 +1906,19 @@
           "description": "True if the Terminal should use a Mica backdrop for the window. This will apply underneath all controls (including the terminal panes and the titlebar)",
           "type": "boolean",
           "default": false
+        },
+        "experimental.rainbowFrame": {
+          "description": "When enabled, the frame of the window will cycle through all the colors. Enabling this will override the `frame` and `unfocusedFrame` settings.",
+          "type": "boolean",
+          "default": false
+        },
+        "frame": {
+          "description": "The color of the window frame when the window is inactive. This only works on Windows 11",
+          "$ref": "#/$defs/ThemeColor"
+        },
+        "unfocusedFrame": {
+          "description": "The color of the window frame when the window is inactive. This only works on Windows 11",
+          "$ref": "#/$defs/ThemeColor"
         }
       }
     },
@@ -1992,6 +2097,12 @@
             {
               "$ref": "#/$defs/ColorSelectionAction"
             },
+            {
+              "$ref": "#/$defs/SearchWebAction"
+            },
+            {
+              "$ref": "#/$defs/ShowSuggestionsAction"
+            },
             {
               "type": "null"
             }
@@ -2074,6 +2185,11 @@
           "description": "When set to true, tabs are always displayed. When set to false and \"showTabsInTitlebar\" is set to false, tabs only appear after opening a new tab.",
           "type": "boolean"
         },
+        "compatibility.enableUnfocusedAcrylic":{
+          "default": true,
+          "description": "When set to true, unfocused windows can have acrylic instead of opaque.",
+          "type": "boolean"
+        },
         "centerOnLaunch": {
           "default": false,
           "description": "When set to `true`, the terminal window will auto-center itself on the display it opens on. The terminal will use the \"initialPosition\" to determine which display to open on.",

doc/roadmap-2022.md

@@ -1,5 +1,9 @@
 # Terminal 2022 Roadmap
 
+> **NOTE**
+>
+> This document has been superseded by the [Terminal 2023 Roadmap]. Please refer to that document for the updated roadmap.
+
 ## Overview 
 
 This document outlines the roadmap of features we're planning for the Windows Terminal during 2022. This serves as a successor to the [Terminal v2 Roadmap], to reflect changes to our planning going forward.
@@ -126,3 +130,5 @@ Incoming issues/asks/etc. are triaged several times a week, labeled appropriatel
 [Windows Terminal Preview 1.12 Release]: https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-12-release/
 [Windows Terminal Preview 1.13 Release]: https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-13-release/
 [Windows Terminal Preview 1.14 Release]: https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-14-release/
+
+[Terminal 2023 Roadmap]: https://github.com/microsoft/terminal/tree/main/doc/roadmap-2023.md

doc/roadmap-2023.md

@@ -0,0 +1,76 @@
+# Terminal 2023 Roadmap
+
+## Overview 
+
+This document outlines the roadmap of features we're planning for the Windows Terminal during 2023. This serves as a successor to the [2022 Roadmap], to reflect changes to our planning going forward.
+
+## Release cadence
+
+We've settled on a roughly quarterly release cycle - about once every three months. In May we released [Terminal 1.18]. We're targeting 1.19 for sometime in late September, and 1.20 likely in early January 2024. (These timelines are rough estimates, not strict rules. For example, 1.18's release was pushed back slightly to better align with Build 2023.)
+
+New features will go into [Windows Terminal Preview](https://aka.ms/terminal-preview) first. Typically, one release after they've been in Preview, those features will move into [Windows Terminal](https://aka.ms/terminal) ("Terminal Stable"). In the case of some more risky or experimental features, we might hold them to only Preview builds for an extended period[^1].
+
+
+| Quarter | Date       | Release Version | Preview Release Blog Post |
+| --------|------------|---------------- | ------------------------- |
+| CY23 Q1 | 2023-01-24 | [Terminal 1.17] | [Windows Terminal Preview 1.17 Release] |
+| CY23 Q2 | 2023-05-23 | [Terminal 1.18] | [Windows Terminal Preview 1.18 Release] |
+| CY23 Q3 |            | [Terminal 1.19] | [Windows Terminal Preview 1.19 Release] |
+| CY23 Q4 |            | [Terminal 1.20] | [Windows Terminal Preview 1.20 Release] |
+
+Within a single milestone, we typically reserve the last month as "bake time", to polish off bugfixes and get the release ready to ship. In this last month, we'll likely slow down our ingestion of community PRs just to stabilize what's already in `main`. For example, a given release might look like:
+
+```mermaid
+gantt
+    title Proposed Terminal Releases 1.14-1.18
+    dateFormat  YYYY-MM-DD
+    axisFormat  %d %b
+    section Terminal 1.18
+        Lock down & bake        :l18, 2023-05-09  , 2w
+        Release 1.18            :milestone, 2023-05-23, 0
+        1.18 becomes Stable     :milestone, after l19, 0
+    section Terminal 1.19
+        Features                :f19, after l18, 10w
+        Bugfix                  :b19, after f19  , 4w
+        Lock down & bake        :l19, after b19  , 2w
+        Release 1.19            :milestone, after l19, 0
+```
+
+_informative, not normative_
+
+## Up next in the Terminal
+
+### Terminal 1.19
+
+* Canary builds. Nightly builds of the Terminal from `main`. More unstable, but quicker access to experimental features.
+* Terminal AI. While this will only be shipping in Canary builds to begin with, the v0 implementation will be available roughly at the same time as 1.19.
+* The Suggestions UI. This is the starting point for shell completions [#3121], tasks [#1595], and probably Terminal AI at some point too.
+* Unicode input for `cmd.exe` (and any other console app using "cooked reads"). See [#15567]
+* Miscellaneous performance improvements. Conhost should be a _lot_ faster now.
+* Broadcast input mode, for sending text to multiple panes at once.
+
+## Team member "north stars"
+
+For a more fluid take on what each of the team's personal goals are, head on over to [Core team North Stars]. This has a list of more long-term goals that each team member is working towards, but not things that are necessarily committed work.
+
+
+[^1]: A conclusive list of these features can be found at https://github.com/microsoft/terminal/blob/main/src/features.xml. Note that this is a raw XML doc used to light up specific parts of the codebase, and not something authored for human consumption.
+
+[2022 Roadmap]: https://github.com/microsoft/terminal/tree/main/doc/roadmap-2022.md
+
+[Terminal 1.17]: https://github.com/microsoft/terminal/releases/tag/v1.17.1023
+[Terminal 1.18]: https://github.com/microsoft/terminal/releases/tag/v1.18.1462.0
+[Windows Terminal Preview 1.17 Release]: https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-17-release/
+[Windows Terminal Preview 1.18 Release]: https://devblogs.microsoft.com/commandline/windows-terminal-preview-1-18-release/
+
+[@DHowett]: https://github.com/DHowett
+[@zadjii-msft]: https://github.com/zadjii-msft
+[@lhecker]: https://github.com/lhecker
+[@carlos-zamora]: https://github.com/carlos-zamora
+[@PankajBhojwani]: https://github.com/PankajBhojwani
+
+[Core team North Stars]: https://github.com/microsoft/terminal/wiki/Core-team-North-Stars
+
+[#1595]: https://github.com/microsoft/terminal/issues/1595
+[#3121]: https://github.com/microsoft/terminal/issues/3121
+[#15567]: https://github.com/microsoft/terminal/issues/15567

doc/specs/#11000 - Marks/Shell-Integration-Marks.md

@@ -0,0 +1,499 @@
+---
+author: Mike Griese
+created on: 2022-03-28
+last updated: 2023-07-19
+issue id: 11000, 1527, 6232
+---
+
+##### [Original issue: [#1527]] [experimental PR [#12948]] [remaining marks [#14341]]
+
+# Windows Terminal - Shell Integration (Marks)
+
+## Abstract
+
+_"Shell integration" refers to a broad category of ways by which a commandline
+shell can drive richer integration with the terminal. This spec in particular is
+most concerned with "marks" and other semantic markup of the buffer._
+
+Marks are a new buffer-side feature that allow the commandline application or
+user to add a bit of metadata to a range of text. This can be used for marking a
+region of text as a prompt, marking a command as succeeded or failed, quickly
+marking errors in the output. These marks can then be exposed to the user as
+pips on the scrollbar, or as icons in the margins. Additionally, the user can
+quickly scroll between different marks, to allow easy navigation between
+important information in the buffer.
+
+Marks in the Windows Terminal are a combination of functionality from a variety
+of different terminal emulators. "Marks" attempts to unify these different, but
+related pieces of functionality.
+
+## Background
+
+There's a large amount of prior art on this subject. I've attempted to collect
+as much as possible in the ["Relevant external docs"](#Relevant-external-docs)
+section below. "Marks" have been used in different scenarios by different
+emulators for different purposes. The common thread running between them of
+marking a region of text in the buffer with a special meaning.
+
+* iTerm2, ConEmu, FinalTerm et.al. support emitting a VT sequence to indicate
+  that a line is a "prompt" line. This is often used for quick navigation
+  between these prompts.
+* FinalTerm (and xterm.js) also support marking up more than just the prompt.
+  They go so far as to differentiate the start/end of the prompt, the start of
+  the commandline input, and the start/end of the command output.
+  `FTCS_COMMAND_FINISHED` is even designed to include metadata indicating
+  whether a command succeeded or failed.
+* Additionally, Terminal.app allows users to "bookmark" lines via the UI. That
+  allows users to quickly come back to something they feel is important.
+* Consider also editors like Visual Studio. VS also uses little marks on the
+  scrollbar to indicate where other matches are for whatever the given search
+  term is.
+
+### "Elevator" pitch
+
+The Terminal provides a way for command line shells to semantically mark parts
+of the command-line output. By marking up parts of the output, the Terminal can
+provide richer experiences. The Terminal will know where each command starts and
+stops, what the actual command was and what the output of that command is. This
+allows the terminal to expose quick actions for:
+
+* Quickly navigating the history by scrolling between commands
+* Re-running a previous command in the history
+* Copying all the output of a single command
+* A visual indicator to separate out one command-line from the next, for quicker
+  mental parsing of the output of the command-line.
+* Collapsing the output of a command, as to reduce noise
+* Visual indicators that highlight commands that succeeded or failed.
+* Jumping to previously used directories
+
+### User Stories
+
+This is a bit of a unusual section, as this feature was already partially
+implemented when this spec was written.
+
+Story |  Size | Description
+--|-----------|--
+A | ✅ Done   | The user can use mark each prompt and have a mark displayed on the scrollbar
+B | ✅ Done   | The user can perform an action to scroll between marks
+C | ✅ Done   | The user can manually add marks to the buffer
+D | ✅ Done   | The shell can emit different marks to differentiate between prompt, command, and output
+E | ✅ Done   | Clearing the buffer clears marks
+F | 🐣 Crawl  | Marks stay in the same place you'd expect after resizing the buffer.
+G | ✅ Done   | Users can perform an action to select the previous command's output
+H | 🚶 Walk   | The find dialog can display marks on the scrollbar indicating the position of search matches
+I | 🏃‍♂️ Run    | The terminal can display icons in the gutter, with quick actions for that command (re-run, copy output, etc)
+J | 🏃‍♂️ Run    | The terminal can display a faint horizontal separator between commands in the buffer.
+K | 🚀 Sprint | The terminal can "collapse" content between two marks.
+L | 🚀 Sprint | The terminal can display a sticky header above the control which displays the most recent command
+M | 🚀 Sprint | The user can open a dialog to manually bookmark a line with a custom comment
+
+## Solution Design
+
+### Supported VT sequences
+
+* [x] iTerm2's OSC `SetMark` (in [#12948])
+* [x] FinalTerm prompt markup sequences
+  - [x] **FTCS_PROMPT** was added in [#13163]
+  - [x] The rest in [#14341]
+* [ ] additionally, VsCode's FinalTerm prompt markup variant, `OSC 663`
+* [ ] [ConEmu's
+  `OSC9;12`](https://conemu.github.io/en/AnsiEscapeCodes.html#ConEmu_specific_OSC)
+* [ ] Any custom OSC we may want to author ourselves.
+
+The FinalTerm prompt sequences are probably the most complicated version of all
+these, so it's important to give these a special callout. Almost all the other
+VT sequences are roughly equivalent to **FTCS_PROMPT**. The xterm.js / VsCode
+version has additional cases, that they ironically added to work around conpty
+not understanding these sequences originally.
+
+#### FinalTerm sequences
+
+The relevant FinalTerm sequences for marking up the prompt are as follows.
+
+
+![image](FTCS-diagram.png)
+
+* **FTCS_PROMPT**: `OSC 133 ; A ST`
+  - The start of a prompt. Internally, this sets a marker in the buffer
+    indicating we started a prompt at the current cursor position, and that
+    marker will be used when we get a **FTCS_COMMAND_START**
+* **FTCS_COMMAND_START**: `OSC 133 ; B ST`
+  - The start of a commandline (READ: the end of the prompt). When it follows a
+    **FTCS_PROMPT**, it creates a mark in the buffer from the location of the
+    **FTCS_PROMPT** to the current cursor position, with the category of
+    `prompt`
+* **FTCS_COMMAND_EXECUTED**: `OSC 133 ; C ST`
+  - The start of the command output / the end of the commandline.
+* **FTCS_COMMAND_FINISHED**: `OSC 133 ; D ; [Ps] ST`
+  - the end of a command.
+
+Same deal for the **FTCS_COMMAND_EXECUTED**/**FTCS_COMMAND_FINISHED** ones.
+**FTCS_COMMAND_EXECUTED** does nothing until we get a **FTCS_COMMAND_FINISHED**,
+and the `[Ps]` parameter determines the category.
+  - `[Ps] == 0`: success
+  - anything else: error
+
+This whole sequence will get turned into a single mark.
+
+When we get the **FTCS_COMMAND_FINISHED**, set the category of the prompt mark
+that preceded it, so that the `prompt` becomes an `error` or a `success`.
+
+
+### Buffer implementation
+
+In the initial PR ([#12948]), marks were stored simply as a `vector<Mark>`,
+where a mark had a start and end point. These wouldn't reflow on resize, and
+didn't support all of the FTCS sequences.
+
+There's ultimately three types of region here we need to mark:
+* The prompt (starting from A)
+* the command (starting from B)
+* the output (starting from C)
+
+That intuitively feels a bit like a text attribute almost. Additionally, the
+prompt should be connected to its subsequent command and output, s.t. we can
+* Select command output
+* re-run command
+
+easily. Supposedly, we could do this by iterating through the whole buffer to
+find the previous/next {whatever}[[1](#footnote-1)]. Additionally, the prompt
+needs to be able to contain the status / category, and a `133;D` needs to be
+able to change the category of the previous prompt/command.
+
+If we instead do a single mark for each command, from `133;A` to `133;A`, and
+have sub-points for elements within the command
+* `133;A` starts a mark on the current line, at the current position.
+* `133;B` sets the end of the mark to the current position.
+* `133;C` updates the mark's `commandStart` to the current end, then sets the
+  end of the mark to the current position.
+* `133;D` updates the mark's `outputStart` to the current end, then sets the end
+  of the mark to the current position. It also updates the category of the mark,
+  if needed.
+
+Each command then only shows up as a single mark on the scrollbar. Jumping
+between commands is easy, `scrollToMark` operates on `mark.start`, which is
+where the prompt started. "Bookmarks", i.e. things started by the user wouldn't
+have `commandStart` or `outputStart` in them. Getting the text of the command,
+of the output is easy - it's just the text between sub-points.
+
+Reflow still sucks though - we'd need to basically iterate over all the marks as
+we're reflowing, to make sure we put them into the right place in the new
+buffer. This is annoying and tedious, but shouldn't realistically be a
+performance problem.
+
+#### Cmd.exe considerations
+
+`cmd.exe` is generally a pretty bad shell, and doesn't have a lot of the same
+hooks that other shells do, that might allow for us to emit the
+**FTCS_COMMAND_EXECUTED** sequence. However, cmd.exe also doesn't allow
+multiline prompts, so we can be relatively certain that when the user presses
+<kbd>enter</kbd>, that's the end of the prompt. We will treat the
+`autoMarkPrompts` setting (which auto-marks <kbd>enter</kbd>) as the _end of the
+prompt_. That would at least allow cmd.exe to emit a {command finished}{prompt
+start}{prompt...}{command start} in the prompt, and have us add the command
+executed. It is not perfect (we wouldn't be able to get error information), but
+it does work well enough.
+
+```cmd
+PROMPT $e]133;D$e\$e]133;A$e\$e]9;9;$P$e\%PROMPT%$e]133;B$e\
+```
+
+## Settings proposals
+
+The below are the proposed additions to the settings for supporting marks and
+interacting with them. Some of these have already been added as experimental
+settings - these would be promoted to no longer be experimental.
+
+Many of the sub-points on these settings are definitely "Future Consideration"
+level settings. For example, the `scrollToMark` `"highlight"` property. That one
+is certainly not something we need to ship with.
+
+### Actions
+
+In addition to driving marks via the output, we will also want to support adding
+marks manually. These can be thought of like "bookmarks" - a user indicated
+region that means something to the user.
+
+* [ ] `addMark`: add a mark to the buffer. If there's a selection, place the
+  mark covering at the selection. Otherwise, place the mark on the cursor row.
+  - [x] `color`: a color for the scrollbar mark. (in [#12948])
+  - [ ] `category`: one of `{"prompt", "error", "warning", "success", "info"}`
+* [ ] `scrollToMark`
+  - [x] `direction`: `["first", "previous", "next", "last"]`  (in [#12948])
+  - [ ] `category`: `flags({categories}...)`, default `"all"`. Only scroll to
+    one of the categories specified (e.g. only scroll to the previous error,
+    only the previous prompt, or just any mark)
+  - [ ] [#13449] - `center` or some other setting that controls how the mark is scrolled in.
+    - Maybe `top` (current) /`center` (as proposed) /`nearestEdge` (when
+      scrolling down, put the mark at the bottom line of viewport , up -> top
+      line)?
+  - [ ] [#13455] - `highlight`: `bool`, default true. Display a temporary
+    highlight around the mark when scrolling to it. ("Highlight" != "select")
+    - If the mark has prompt/command/output sections, only select the prompt and command.
+    - If the mark has zero width (i.e. the user just wanted to bookmark a line),
+      then highlight the entire row.
+* [x] `clearMark`: Remove any marks in the selected region (or at the cursor
+  position)  (in [#12948])
+* [x] `clearAllMarks`: Remove all the marks from the buffer.  (in [#12948])
+
+
+#### Selecting commands & output
+
+_Inspired by a long weekend of manually copying .csv output from the Terminal to
+a spreadsheet, only to discover that we rejected [#4588] some years ago._
+
+* [x] `selectCommand(direction=[prev, next])`: Starting at the active selection
+  anchor, (or the cursor if there's no selection), select the command that
+  starts before/after this point (exclusive).  Probably shouldn't wrap around
+  the buffer.
+  * Since this will create a selection including the start of the command,
+    performing this again will select the _next_ command (in whatever
+    direction).
+* [x] `selectOutput(direction=[prev, next])`: same as above, but with command outputs.
+
+A convenient workflow might be a `multipleActions([selectOutput(prev),
+copy()])`, to quickly select the previous commands output.
+
+### Per-profile settings
+
+* [x] `autoMarkPrompts`: `bool`, default `false`.  (in [#12948])
+* [ ] `showFindMatchesOnScrollbar`: `bool`, default `true`.
+* [ ] `showMarksOnScrollbar`: `bool` or `flags({categories}...)`
+  * As an example: `"showMarksOnScrollbar": ["error", "success"]`).
+  * Controls if marks should be displayed on the scrollbar.
+  * If `true`/`"all"`, then all marks are displayed.
+  * If `false`/`"none"`, then no marks are displayed.
+  * If a set of categories are provided, only display marks from those categories.
+  * [x] the bool version is (in [#12948])
+  * [ ] The `flags({categories}...)` version is not done yet.
+* [ ] `showGutterIcons`, for displaying gutter icons.
+
+## UX Design
+
+An example of what colored marks look like:
+
+![Select the entire output of a command](https://user-images.githubusercontent.com/18356694/207696859-a227abe2-ccd4-4b81-8a2c-8a22219cd0dd.gif)
+
+This gif demos both prompt marks and marks for search results:
+
+![](https://user-images.githubusercontent.com/18356694/191330278-3f6bc207-1bd5-4ebd-bb0e-1f84b0170f49.gif)
+
+
+### Gutter icons
+
+![](vscode-shell-integration-gutter-mark.png)
+_An example of what the icons in the VsCode gutter look like_
+
+### Multiple marks on the same line
+
+When it comes to displaying marks on the scrollbar, or in the margins, the
+relative priority of these marks matters. Marks are given the following
+priority, with errors being the highest priority.
+* Error
+* Warning
+* Success
+* Prompt
+* Info (default)
+
+## Work needed to get marks to v1
+
+* [x] Clearing the screen leaves marks behind
+  * [x] Make sure `ED2` works to clear/move marks
+  * [x] Same with `ED3`
+  * [x] Same with `cls` / `Clear-Host`
+  * [x] Clear Buffer action too.
+* [X] Circling doesn't update scrollbar
+  * I think this was fixed in [#14341], or in [#14045]
+* [ ] Resizing / reflowing marks
+* [x] marks should be stored in the `TextBuffer`
+
+## Future Considerations
+* adding a timestamp for when a line was marked?
+* adding a comment to the mark. How do we display that comment? a TeachingTip on
+  the scrollbar maybe (actually that's a cool idea)
+* adding a shape to the mark? Terminal.app marks prompt lines with brackets in
+  the margins
+* Marks are currently just displayed as "last one in wins", they should have a
+  real sort order
+* Should the height of a mark on the scrollbar be dependent on font size &
+  buffer height? I think I've got it set to like, a static 2dip, but maybe it
+  should represent the actual height of the row (down to a min 1dip)
+* [#13455] - highlight a mark when scrolled to with the `scrollToMark` action.
+  This is left as a future consideration to figure out what kind of UI we want
+  here. Do we want to highlight
+  - the prompt?
+  - the whole row of the prompt?
+  - the prompt and the command?
+  - The whole prompt & command & output?
+* an `addBookmark` action: This one's basically just `addMark`, but opens a prompt
+  (like the window renamer) to add some text as a comment. Automatically
+  populated with the selected text (if there was some).
+  - A dedicated transient pane for displaying non-terminal content might be
+    useful for such a thing.
+  - This might just make more sense as a parameter to `addMark`.
+* Other ideas for `addMark` parameters:
+  - `icon`: This would require us to better figure out how we display gutter
+    icons. This would probably be like, a _shape_ rather than an arbitrary
+    image.
+  - `note`: a note to stick on the mark, as a comment. Might be more valuable
+    with something like `addBookmark`.
+
+### Gutter icons
+
+VsCode implements a set of gutter icons to the left of the buffer lines, to
+provide a UI element for exposing some quick actions to perform, powered by
+shell integration.
+
+Gutter icons don't need to implement app-level actions at all. They _should_ be
+part of the control. At least, part of the UWP `TermControl`. These are some
+basic "actions" we could add to that menu. Since these are all attached to a
+mark anyways, we already know what mark the user interacted with, and where the
+start/end already is.
+* Copy command
+* Copy output
+* Re-run command
+* Save as task
+* Explain this (for errors)
+
+To allow comments in marks (ala "bookmarks"), we can use
+the gutter flyout to display the comment, and have the tooltip display that
+comment.
+
+This is being left as a future consideration for now. We need to really sit and
+consider what the UX is like for this.
+* Do we just stick the gutter icons in the margin/padding?
+* Have it be a separate space in the "buffer"
+  - If it's in the buffer itself, we can render it with the renderer, which by
+    all accounts, we probably should.
+
+### Edge cases where these might not work as expected
+
+Much of the benefits of shell integration come from literal buffer text parsing.
+This can lead to some rough edge cases, such as:
+
+* the user presses <kbd>Ctrl+V</kbd><kbd>Escape</kbd> to input an ESC character
+  and the shell displays it as `^[`
+* the user presses <kbd>Ctrl+V</kbd><kbd>Ctrl+J</kbd> to input an LF character
+  and the shell displays it as a line break
+* the user presses <kbd>Enter</kbd> within a quoted string and the shell
+  displays a continuation prompt
+* the user types a command including an exclamation point, and the shell invokes
+  history expansion and echoes the result of expansion before it runs the
+  command
+* The user has a prompt with a right-aligned status, ala
+  ![](https://user-images.githubusercontent.com/189190/254475719-5007df07-6cc3-42e8-baf7-2572579eb2b9.png)
+
+In these cases, the effects of shell integration will likely not work as
+intended. There are various possible solutions that are being explored. We might
+want to in the future also use [VsCode's extension to the FTCS sequences] to
+enable the shell to tell the terminal the literal resulting commandline.
+
+There's been [other proposals] to extend shell integration features as well.
+
+### Rejected ideas
+
+There was originally some discussion as to whether this is a design that should
+be unified with generic pattern matchers. Something like the URL detection,
+which identifies part of the buffer and then "marks" it. Prototypes for both of
+these features are going in very different directions, however. Likely best to
+leave them separate.
+
+## Resources
+
+### Other related issues
+
+Not necessarily marks related, but could happily leverage this functionality.
+
+* [#5916] and [#12366], which are likely to be combined into a single thread
+  - Imagine a trigger that automatically detects `error:.*` and then marks the line
+* [#9583]
+  - Imagine selecting some text, colorizing & marking it all at once
+  - `addMark(selection:false)`, above, was inspired by this.
+* [#7561] (and broadly, [#3920])
+  - Search results should maybe show up here on the scrollbar too.
+* [#13455]
+* [#13449]
+* [#4588]
+* [#14754] - A "sticky header" for the `TermControl` that could display the
+  previous command at the top of the buffer.
+* [#2226] - a scrollable "minimap" in te scrollbar, as opposed to marks
+
+### Relevant external docs
+* **GREAT** summary of the state of the ecosystem: https://gitlab.freedesktop.org/terminal-wg/specifications/-/issues/28
+* https://iterm2.com/documentation-escape-codes.html
+  - `OSC 1337 ; SetMark ST` under "Set Mark"
+  - under "Shell Integration/FinalTerm
+* https://support.apple.com/en-ca/guide/terminal/trml135fbc26/mac
+  - discusses auto-marked lines on `enter`/`^C`/`^D`
+  - allows bookmarking lines with selection
+  - bookmarks can have a name (maybe not super important)
+* [How to Use Marks in OS X’s Terminal for Easier Navigation](https://www.howtogeek.com/256548/how-to-use-marks-in-os-xs-terminal-for-easier-navigation/)
+* [Terminal: The ‘\[‘ Marks the Spot](https://scriptingosx.com/2017/03/terminal-the-marks-the-spot/)
+* Thread with VsCode (xterm.js) implementation notes: https://github.com/microsoft/terminal/issues/1527#issuecomment-1076455642
+* [xterm.js prompt markup sequences](https://github.com/microsoft/vscode/blob/39cc1e1c42b2e53e83b1846c2857ca194848cc1d/src/vs/workbench/contrib/terminal/browser/xterm/shellIntegrationAddon.ts#L50-L52)
+* [VsCode command tracking release notes](https://code.visualstudio.com/updates/v1_22#_command-tracking), also [Terminal shell integration](https://code.visualstudio.com/updates/v1_65#_terminal-shell-integration)
+* ConEMU:
+  Sequence | Description
+  -- | --
+  ESC ] 9 ; 12 ST | Let ConEmu treat current cursor position as prompt start. Useful with PS1.
+
+* https://iterm2.com/documentation-one-page.html#documentation-triggers.html"
+
+### Footnotes
+
+<a name="footnote-1"><a>[1]: Intuitively, this feels prohibitively expensive,
+but you'd be mistaken.
+
+An average device right now (I mean something that was alright about 5 years
+ago, like an 8700k with regular DDR4) does about 4GB/s of random, un-cached
+memory access. While low-end devices are probably a bit slower, I think 4GB/s is
+a good estimate regardless. That's because non-random memory access is way way
+faster than that at around 20GB/s (DDR4 2400 - what most laptops had for the
+last decade).
+
+Assuming a 120 column * 32k line buffer (our current maximum), the buffer would
+be about 21MB large. Going through the entire buffer linearly at 20GB/s would
+take just 1ms (including all text and metadata). If we assume that each row has
+a mark, that marks are 36 byte large and assuming the worst case of random
+access, we can go through all 32k within about 0.3ms.
+
+
+
+_(Thanks lhecker for these notes)_
+
+
+[#1527]: https://github.com/microsoft/terminal/issues/1527
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#1527]: https://github.com/microsoft/terminal/issues/1527
+[#6232]: https://github.com/microsoft/terminal/issues/6232
+[#2226]: https://github.com/microsoft/terminal/issues/2226
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#13163]: https://github.com/microsoft/terminal/issues/13163
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#13455]: https://github.com/microsoft/terminal/issues/13455
+[#13449]: https://github.com/microsoft/terminal/issues/13449
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#4588]: https://github.com/microsoft/terminal/issues/4588
+[#5804]: https://github.com/microsoft/terminal/issues/5804
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#12948]: https://github.com/microsoft/terminal/issues/12948
+[#13455]: https://github.com/microsoft/terminal/issues/13455
+[#5916]: https://github.com/microsoft/terminal/issues/5916
+[#12366]: https://github.com/microsoft/terminal/issues/12366
+[#9583]: https://github.com/microsoft/terminal/issues/9583
+[#7561]: https://github.com/microsoft/terminal/issues/7561
+[#3920]: https://github.com/microsoft/terminal/issues/3920
+[#13455]: https://github.com/microsoft/terminal/issues/13455
+[#13449]: https://github.com/microsoft/terminal/issues/13449
+[#4588]: https://github.com/microsoft/terminal/issues/4588
+[#14341]: https://github.com/microsoft/terminal/issues/14341
+[#14045]: https://github.com/microsoft/terminal/issues/14045
+[#14754]: https://github.com/microsoft/terminal/issues/14754
+[#14341]: https://github.com/microsoft/terminal/issues/14341
+
+[VsCode's extension to the FTCS sequences]: https://code.visualstudio.com/docs/terminal/shell-integration#_vs-code-custom-sequences-osc-633-st
+
+[other proposals]: https://gitlab.freedesktop.org/terminal-wg/specifications/-/merge_requests/6#f6de1e5703f5806d0821d92b0274e895c4b6d850

oss/libpopcnt/libpopcnt.h

@@ -95,7 +95,7 @@
   #define HAVE_AVX512
 #endif
 
-#if defined(X86_OR_X64)
+#if defined(X86_OR_X64) && !defined(_M_ARM64EC)
   /* MSVC compatible compilers (Windows) */
   #if defined(_MSC_VER)
     /* clang-cl (LLVM 10 from 2020) requires /arch:AVX2 or

res/terminal/Terminal_Can.svg

@@ -0,0 +1,407 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="48"
+   height="48"
+   viewBox="0 0 48 48"
+   fill="none"
+   version="1.1"
+   id="svg284"
+   sodipodi:docname="Terminal_Can_Pill.svg"
+   inkscape:version="0.92.4 (5da689c313, 2019-01-14)">
+  <metadata
+     id="metadata288">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="922"
+     inkscape:window-height="816"
+     id="namedview286"
+     showgrid="false"
+     inkscape:zoom="8.8541667"
+     inkscape:cx="-17.429862"
+     inkscape:cy="31.710582"
+     inkscape:window-x="3142"
+     inkscape:window-y="60"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg284" />
+  <g
+     id="g4007"
+     transform="matrix(0.9375,0,0,0.9375,0,1.5)">
+    <path
+       id="path150"
+       d="M 0,13 H 16 V 6 H 2 C 0.9,6 0,6.9 0,8 Z"
+       inkscape:connector-curvature="0"
+       style="fill:#cccccc" />
+    <path
+       id="path152"
+       d="M 32,6 H 16 v 7 h 16 z"
+       inkscape:connector-curvature="0"
+       style="fill:#999999" />
+    <path
+       id="path154"
+       d="M 48,13 H 32 V 6 h 14 c 1.1,0 2,0.9 2,2 z"
+       inkscape:connector-curvature="0"
+       style="fill:#666666" />
+    <path
+       id="path156"
+       d="M 46,42 H 2 C 0.9,42 0,41.1 0,40 V 12 h 48 v 28 c 0,1.1 -0.9,2 -2,2 z"
+       style="fill:url(#paint0_linear)"
+       inkscape:connector-curvature="0" />
+    <g
+       id="g171"
+       style="filter:url(#filter0_dd)">
+      <path
+         id="path158"
+         d="m 15.2,24.3 -8.80001,8.8 c -0.5,0.5 -0.5,1.2 0,1.6 l 1.8,1.8 C 8.69999,37 9.4,37 9.8,36.5 l 8.8,-8.8 c 0.5,-0.5 0.5,-1.2 0,-1.6 l -1.8,-1.8 c -0.4,-0.4 -1.2,-0.4 -1.6,0 z"
+         style="fill:url(#paint1_linear)"
+         inkscape:connector-curvature="0" />
+      <mask
+         height="13"
+         width="13"
+         y="24"
+         x="6"
+         maskUnits="userSpaceOnUse"
+         mask-type="alpha"
+         id="mask0">
+        <path
+           id="path160"
+           d="m 15.2,24.3 -8.80001,8.8 c -0.5,0.5 -0.5,1.2 0,1.6 l 1.8,1.8 C 8.69999,37 9.4,37 9.8,36.5 l 8.8,-8.8 c 0.5,-0.5 0.5,-1.2 0,-1.6 l -1.8,-1.8 c -0.4,-0.4 -1.2,-0.4 -1.6,0 z"
+           inkscape:connector-curvature="0"
+           style="fill:url(#paint2_linear)" />
+      </mask>
+      <g
+         id="g167"
+         mask="url(#mask0)">
+        <g
+           id="g165"
+           style="filter:url(#filter1_dd)">
+          <path
+             id="path163"
+             d="m 9.8,17.3 8.8,8.8 c 0.5,0.5 0.5,1.2 0,1.6 l -1.8,1.8 c -0.5,0.5 -1.2,0.5 -1.6,0 L 6.39999,20.7 c -0.5,-0.5 -0.5,-1.2 0,-1.6 l 1.8,-1.8 C 8.59999,16.9 9.4,16.9 9.8,17.3 Z"
+             style="fill:url(#paint3_linear)"
+             inkscape:connector-curvature="0" />
+        </g>
+      </g>
+      <path
+         id="path169"
+         d="m 9.8,17.3 8.8,8.8 c 0.5,0.5 0.5,1.2 0,1.6 l -1.8,1.8 c -0.5,0.5 -1.2,0.5 -1.6,0 L 6.39999,20.7 c -0.5,-0.5 -0.5,-1.2 0,-1.6 l 1.8,-1.8 C 8.59999,16.9 9.4,16.9 9.8,17.3 Z"
+         style="fill:url(#paint4_linear)"
+         inkscape:connector-curvature="0" />
+    </g>
+    <g
+       id="g175"
+       style="filter:url(#filter2_dd)">
+      <path
+         id="path173"
+         d="M 40,32 H 24 c -0.6,0 -1,0.4 -1,1 v 3 c 0,0.6 0.4,1 1,1 h 16 c 0.6,0 1,-0.4 1,-1 v -3 c 0,-0.6 -0.4,-1 -1,-1 z"
+         style="fill:url(#paint5_linear)"
+         inkscape:connector-curvature="0" />
+    </g>
+  </g>
+  <defs
+     id="defs282">
+    <filter
+       id="filter0_dd"
+       x="3.02499"
+       y="15"
+       width="18.95"
+       height="25.875"
+       filterUnits="userSpaceOnUse"
+       color-interpolation-filters="sRGB">
+      <feFlood
+         flood-opacity="0"
+         result="BackgroundImageFix"
+         id="feFlood177" />
+      <feColorMatrix
+         in="SourceAlpha"
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0"
+         id="feColorMatrix179" />
+      <feOffset
+         dy="0.5"
+         id="feOffset181" />
+      <feGaussianBlur
+         stdDeviation="0.5"
+         id="feGaussianBlur183" />
+      <feColorMatrix
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.1 0"
+         id="feColorMatrix185" />
+      <feBlend
+         mode="normal"
+         in2="BackgroundImageFix"
+         result="effect1_dropShadow"
+         id="feBlend187" />
+      <feColorMatrix
+         in="SourceAlpha"
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0"
+         id="feColorMatrix189" />
+      <feOffset
+         dy="1"
+         id="feOffset191" />
+      <feGaussianBlur
+         stdDeviation="1.5"
+         id="feGaussianBlur193" />
+      <feColorMatrix
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.2 0"
+         id="feColorMatrix195" />
+      <feBlend
+         mode="normal"
+         in2="effect1_dropShadow"
+         result="effect2_dropShadow"
+         id="feBlend197" />
+      <feBlend
+         mode="normal"
+         in="SourceGraphic"
+         in2="effect2_dropShadow"
+         result="shape"
+         id="feBlend199" />
+    </filter>
+    <filter
+       id="filter1_dd"
+       x="3.02499"
+       y="15"
+       width="18.95"
+       height="18.875"
+       filterUnits="userSpaceOnUse"
+       color-interpolation-filters="sRGB">
+      <feFlood
+         flood-opacity="0"
+         result="BackgroundImageFix"
+         id="feFlood202" />
+      <feColorMatrix
+         in="SourceAlpha"
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0"
+         id="feColorMatrix204" />
+      <feOffset
+         dy="0.5"
+         id="feOffset206" />
+      <feGaussianBlur
+         stdDeviation="0.5"
+         id="feGaussianBlur208" />
+      <feColorMatrix
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.1 0"
+         id="feColorMatrix210" />
+      <feBlend
+         mode="normal"
+         in2="BackgroundImageFix"
+         result="effect1_dropShadow"
+         id="feBlend212" />
+      <feColorMatrix
+         in="SourceAlpha"
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0"
+         id="feColorMatrix214" />
+      <feOffset
+         dy="1"
+         id="feOffset216" />
+      <feGaussianBlur
+         stdDeviation="1.5"
+         id="feGaussianBlur218" />
+      <feColorMatrix
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.2 0"
+         id="feColorMatrix220" />
+      <feBlend
+         mode="normal"
+         in2="effect1_dropShadow"
+         result="effect2_dropShadow"
+         id="feBlend222" />
+      <feBlend
+         mode="normal"
+         in="SourceGraphic"
+         in2="effect2_dropShadow"
+         result="shape"
+         id="feBlend224" />
+    </filter>
+    <filter
+       id="filter2_dd"
+       x="20"
+       y="30"
+       width="24"
+       height="11"
+       filterUnits="userSpaceOnUse"
+       color-interpolation-filters="sRGB">
+      <feFlood
+         flood-opacity="0"
+         result="BackgroundImageFix"
+         id="feFlood227" />
+      <feColorMatrix
+         in="SourceAlpha"
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0"
+         id="feColorMatrix229" />
+      <feOffset
+         dy="0.5"
+         id="feOffset231" />
+      <feGaussianBlur
+         stdDeviation="0.5"
+         id="feGaussianBlur233" />
+      <feColorMatrix
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.1 0"
+         id="feColorMatrix235" />
+      <feBlend
+         mode="normal"
+         in2="BackgroundImageFix"
+         result="effect1_dropShadow"
+         id="feBlend237" />
+      <feColorMatrix
+         in="SourceAlpha"
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0"
+         id="feColorMatrix239" />
+      <feOffset
+         dy="1"
+         id="feOffset241" />
+      <feGaussianBlur
+         stdDeviation="1.5"
+         id="feGaussianBlur243" />
+      <feColorMatrix
+         type="matrix"
+         values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.2 0"
+         id="feColorMatrix245" />
+      <feBlend
+         mode="normal"
+         in2="effect1_dropShadow"
+         result="effect2_dropShadow"
+         id="feBlend247" />
+      <feBlend
+         mode="normal"
+         in="SourceGraphic"
+         in2="effect2_dropShadow"
+         result="shape"
+         id="feBlend249" />
+    </filter>
+    <linearGradient
+       id="paint0_linear"
+       x1="36.4462"
+       y1="47.8257"
+       x2="11.8217"
+       y2="5.1748"
+       gradientUnits="userSpaceOnUse">
+      <stop
+         stop-color="#333333"
+         id="stop252" />
+      <stop
+         offset="1"
+         stop-color="#4D4D4D"
+         id="stop254" />
+    </linearGradient>
+    <linearGradient
+       id="paint1_linear"
+       x1="14.5276"
+       y1="33.9959"
+       x2="10.4841"
+       y2="26.9924"
+       gradientUnits="userSpaceOnUse">
+      <stop
+         stop-color="#999999"
+         id="stop257" />
+      <stop
+         offset="1"
+         stop-color="#B3B3B3"
+         id="stop259" />
+    </linearGradient>
+    <linearGradient
+       id="paint2_linear"
+       x1="14.5276"
+       y1="33.9959"
+       x2="10.4841"
+       y2="26.9924"
+       gradientUnits="userSpaceOnUse">
+      <stop
+         stop-color="#999999"
+         id="stop262" />
+      <stop
+         offset="1"
+         stop-color="#B3B3B3"
+         id="stop264" />
+    </linearGradient>
+    <linearGradient
+       id="paint3_linear"
+       x1="16.2747"
+       y1="30.0336"
+       x2="8.73699"
+       y2="16.9781"
+       gradientUnits="userSpaceOnUse">
+      <stop
+         stop-color="#CCCCCC"
+         id="stop267" />
+      <stop
+         offset="1"
+         stop-color="#E6E6E6"
+         id="stop269" />
+    </linearGradient>
+    <linearGradient
+       id="paint4_linear"
+       x1="16.2747"
+       y1="30.0336"
+       x2="8.73699"
+       y2="16.9781"
+       gradientUnits="userSpaceOnUse">
+      <stop
+         stop-color="#CCCCCC"
+         id="stop272" />
+      <stop
+         offset="1"
+         stop-color="#E6E6E6"
+         id="stop274" />
+    </linearGradient>
+    <linearGradient
+       id="paint5_linear"
+       x1="35.1496"
+       y1="39.9553"
+       x2="28.8504"
+       y2="29.0447"
+       gradientUnits="userSpaceOnUse">
+      <stop
+         stop-color="#CCCCCC"
+         id="stop277" />
+      <stop
+         offset="1"
+         stop-color="#E6E6E6"
+         id="stop279" />
+    </linearGradient>
+  </defs>
+  <rect
+     x="19"
+     y="31.053001"
+     width="29"
+     height="11.947"
+     rx="1.8238994"
+     id="rect29"
+     style="fill:#fcc024;stroke-width:1;fill-opacity:1;stroke:none;stroke-miterlimit:4;stroke-dasharray:none" />
+  <path
+     d="M29.3999 39.7363C28.9253 39.9824 28.335 40.1055 27.6289 40.1055C26.7148 40.1055 25.9824 39.8169 25.4316 39.2397C24.8809 38.6626 24.6055 37.9053 24.6055 36.9678C24.6055 35.96 24.9146 35.1455 25.5327 34.5244C26.1538 33.9033 26.9375 33.5928 27.8838 33.5928C28.4932 33.5928 28.9985 33.6792 29.3999 33.8521V34.8892C28.9751 34.6372 28.5063 34.5112 27.9937 34.5112C27.311 34.5112 26.7573 34.7295 26.3325 35.166C25.9106 35.6025 25.6997 36.1855 25.6997 36.915C25.6997 37.6094 25.8975 38.1631 26.293 38.5762C26.6885 38.9863 27.2085 39.1914 27.853 39.1914C28.4478 39.1914 28.9634 39.0508 29.3999 38.7695V39.7363ZM35.772 40H34.625L34.0581 38.396H31.5796L31.0347 40H29.8921L32.252 33.6982H33.4297L35.772 40ZM33.7812 37.5435L32.9067 35.0298C32.8804 34.9478 32.8525 34.8159 32.8232 34.6343H32.8057C32.7793 34.8013 32.75 34.9331 32.7178 35.0298L31.8521 37.5435H33.7812ZM41.9858 40H40.8433L37.833 35.3682C37.7568 35.251 37.6938 35.1294 37.644 35.0034H37.6177C37.6411 35.1382 37.6528 35.4268 37.6528 35.8691V40H36.6421V33.6982H37.8594L40.7686 38.2202C40.8916 38.4077 40.9707 38.5366 41.0059 38.6069H41.0234C40.9941 38.4399 40.9795 38.1572 40.9795 37.7588V33.6982H41.9858V40Z"
+     id="pill_text"
+     inkscape:connector-curvature="0"
+     style="fill:#000000;stroke-width:1;stroke:none;stroke-miterlimit:4;stroke-dasharray:none" />
+</svg>

res/terminal/Terminal_Can_HC.svg

@@ -0,0 +1,17 @@
+<svg width="48" height="48" viewBox="0 0 48 48" fill="none" xmlns="http://www.w3.org/2000/svg">
+<defs>
+<linearGradient id="foreground"><stop stop-color="#000000"/></linearGradient>
+<linearGradient id="background"><stop stop-color="#ffffff"/></linearGradient>
+</defs>
+<!-- background rounded rectangle -->
+<path d="M2 6C0.9 6 0 6.9 0 8L0 12L0 13L0 40C0 41.1 0.9 42 2 42L46 42C47.1 42 48 41.1 48 40L48 13L48 12L48 8C48 6.9 47.1 6 46 6L32 6L16 6L2 6Z" fill="url(#background)"/>
+<!-- tab outlines -->
+<rect y="12" x="0" height="1" width="48" fill="url(#foreground)"/>
+<rect y="6" x="15.33" height="7" width="1" fill="url(#foreground)"/>
+<rect y="6" x="31.66" height="7" width="1" fill="url(#foreground)"/>
+<!-- > -->
+<path d="M15.2 24.3L6.4 33.1C5.9 33.6 5.9 34.3 6.4 34.7L8.2 36.5C8.7 37 9.4 37 9.8 36.5L18.6 27.7C19.1 27.2 19.1 26.5 18.6 26.1L16.8 24.3C16.4 23.9 15.6 23.9 15.2 24.3Z" fill="url(#foreground)"/>
+<path d="M9.8 17.3L18.6 26.1C19.1 26.6 19.1 27.3 18.6 27.7L16.8 29.5C16.3 30 15.6 30 15.2 29.5L6.4 20.7C5.9 20.2 5.9 19.5 6.4 19.1L8.2 17.3C8.6 16.9 9.4 16.9 9.8 17.3Z" fill="url(#foreground)"/>
+<!-- "PRE" -->
+<path d="m 27.279297,33.324219 c 0,2.468099 0,4.936198 0,7.404297 0.513672,0 1.027343,0 1.541015,0 0,-0.848958 0,-1.697917 0,-2.546875 0.917549,0.01484 1.927453,0.03299 2.65875,-0.616892 1.172278,-0.927905 1.176118,-3.073122 -0.17547,-3.840777 -0.981472,-0.568217 -2.13908,-0.358412 -3.218649,-0.399753 -0.268549,0 -0.537097,0 -0.805646,0 z m 5.869141,0 c 0,2.468099 0,4.936198 0,7.404297 0.513021,0 1.026041,0 1.539062,0 0,-0.950521 0,-1.901042 0,-2.851563 0.431639,-0.03621 0.908827,0.05394 1.148438,0.458985 0.525553,0.771736 0.970414,1.596546 1.458984,2.392578 0.604167,0 1.208333,0 1.8125,0 -0.638695,-0.976785 -1.211177,-1.999445 -1.914561,-2.931671 -0.241051,-0.276681 -0.636923,-0.466649 -0.07177,-0.574189 1.274395,-0.677377 1.378019,-2.774051 0.102268,-3.504493 -0.922467,-0.560429 -2.029423,-0.352936 -3.053526,-0.393944 -0.340466,0 -0.680932,0 -1.021398,0 z m 6.25,0 c 0,2.468099 0,4.936198 0,7.404297 1.440755,0 2.88151,0 4.322265,0 0,-0.454427 0,-0.908855 0,-1.363282 -0.925781,0 -1.851563,0 -2.777344,0 0,-0.566406 0,-1.132812 0,-1.699218 0.804688,0 1.609375,0 2.414063,0 0,-0.454427 0,-0.908855 0,-1.363282 -0.804688,0 -1.609375,0 -2.414063,0 0,-0.536458 0,-1.072917 0,-1.609375 0.873047,0 1.746094,0 2.619141,0 0,-0.45638 0,-0.91276 0,-1.36914 -1.388021,0 -2.776041,0 -4.164062,0 z M 34.6875,34.648438 c 0.570781,0.0371 1.28319,-0.150767 1.691507,0.358943 0.370833,0.564952 0.02331,1.464787 -0.684396,1.526855 -0.334157,0.03512 -0.67147,0.0117 -1.007111,0.0185 0,-0.634765 0,-1.269531 0,-1.904296 z m -5.867188,0.01562 c 0.61736,0.02299 1.42501,-0.135196 1.79395,0.492096 0.333428,0.657753 -0.0252,1.619083 -0.829192,1.664678 -0.319151,0.05007 -0.643164,0.0243 -0.964758,0.03073 0,-0.729167 0,-1.458333 0,-2.1875 z" fill="url(#foreground)"/>
+</svg>