In #13024, we removed `Terminal::GetCursorPosition` from TerminalCore.
This has been widely regarded as a good move.
Now, you might rightly be wondering: why didn't compilation immediately
fail? Well. It turns out that there were _two_ copies of
`GetCursorPosition`. One for `const Terminal`, and one for `Terminal`.
This is important.
`Terminal::GetCursorPosition()` returned the cursor position relative to
the viewport. `Terminal::GetCursorPosition() const`, however, returns
the cursor position in absolute.
We removed the non-`const` one. Fortunately, thanks to the lookup rules
for `const`-qualified members, this didn't matter. Code that called
`GetCursorPosition()` still called `GetCursorPosition()`, and everything
was fine.
Except that part about the relative coordinates. That was not fine.
The TSF control is the _only_ consumer of `ControlCore.CursorPosition`,
and that was the _only_ consumer of relative-`GetCursorPosition()`.
This commit restores equilibrium by introducing a new
`GetViewportRelativeCursorPosition()` member to `Terminal` and switching
over the only consumer of relative cursor position to use it.
Closes#13769.
Backport of #13785.
Does two things:
* the first two commits: shakes up the way we reference MUX in our projects so we can actually just
```xml
<PropertyGroup Label="NuGet Dependencies">
<TerminalMUX>true</TerminalMUX>
</PropertyGroup>
```
Like every other dependency we have
* the last commit: update to MUX.2.7.3
This is the 1.14 PR, which should be appropriately cherry-picked through to `release-1.15` and `main`
We have a number of theories why #12607 is happening, one of which is that
some GPU drivers somehow rely on Win32 messages or similar which we process
on the main thread. If we then try to acquire the console lock on the main
thread, while the GPU-driver thread itself is holding that lock, we've got
ourselves a deadlock. This PR makes this less likely by running the repeat
offender `UpdatePatternLocations` on a background thread instead.
We have a number of other locations which acquire the console lock on the
main thread and a thorough bug fix must be done in a different way.
* After pasting an URL it gets underlined on hover ✅
(cherry picked from commit 23e4d313d5)
Service-Card-Id: 85033018
Service-Version: 1.14
Due to the way our localization pipeline works, we cannot delete
resources in main until the resources in question are totally flushed
out of the active-servicing release branches. Unfortunately, in #13179,
we _did_ remove resource keys. Because the Color Schemes page in 1.14
and 1.15 uses the resources directly (rather than by way of x:Uid), it
is easier for us to backport the resource changes now than to
reintroduce the old keys on main.
Closes#13606
(cherry picked from commit 6933429721)
Service-Card-Id: 84870299
Service-Version: 1.14
... which should have never worked in the first place
Quick filing a PR for review. This is the bulk of the actual code changes. Figured it was best to review the conpty changes sooner than later and I can add tests in the morning.
Test cases:
```
printf "\e[7m test \e[m\n"
```
```
printf "\e[7m"; printf ' %.0s' $(seq 1 $COLUMNS); printf "\e[m\n"
```
After:
Closes#13229
Definitely fixes:
* [x] #13643
* [x] https://github.com/PowerShell/PowerShell/issues/17812
(cherry picked from commit ffe9a0f09b)
Service-Card-Id: 84736231
Service-Version: 1.15
(cherry picked from commit fff3372ed2)
Service-Card-Id: 84736230
Service-Version: 1.14
We must use 65535 as `MAX_PARAMETER_VALUE` in order for us to properly parse
win32-input-mode sequences, which transmit UTF-16 characters as parameters.
Closes#12977
## Validation Steps Performed
* Call `SendInput` with 🙁 (`L'\xD83D'`, `L'\xDE41'`)
* 🙁 appears on the input line ✅
(cherry picked from commit 74cdffe921)
Service-Card-Id: 84772549
Service-Version: 1.15
(cherry picked from commit f3f9eba5c9)
Service-Card-Id: 84772548
Service-Version: 1.14
Curiously, at least on Windows 10 (and rarely on Windows 11), if you minimize the Terminal by clicking on the taskbar, then alt-tab to try and restore the window, the Taskbar will decide to call `SwitchToWindow` on the invisible, owned ConPTY window instead of the main window. When that happens, ConPTY'll get a `WM_SIZE(SIZE_RESTORED, lParam=0)`. The main window will NOT get a `SwitchToWindow` called. If ConPTY doesn't actually inform the hosting process about this, then the main HWND might stay hidden.
* Refer to #13158 where we disabled this.
* Closes#13589
* Closes#13248
* Tested manually on a Windows 10 VM.
* Confirmed that opening tabs while maximized/snapped doesn't restore down.
* `[Native]::ShowWindow([Native]::GetConsoleWindow(), 6)` still works
(cherry picked from commit d1fc11248c)
Service-Card-Id: 84673887
Service-Version: 1.15
(cherry picked from commit b670800460)
Service-Card-Id: 84673886
Service-Version: 1.14
On occasion, when we submit to the store we get a package rejection
because the app name has changed for the `qps-*` locales. Instead of
constantly reserving new pseudolocalized app names every time the
pseudolocalization seed changes, we should just lock our app name so
that it does not get pseudolocalized.
(cherry picked from commit bb40efc00b)
Service-Card-Id: 84417902
Service-Version: 1.15
(cherry picked from commit 210145a709)
Service-Card-Id: 84417901
Service-Version: 1.14
Does what it says on the tin. When we get focused, temporarily turn off readonly mode, as to not pop the dialog when the focus sequence is eventually sent to the connection.
* closes#13461
(cherry picked from commit b4a52c847f)
Service-Card-Id: 84111370
Service-Version: 1.14
## Summary of the Pull Request
When the debug tap converts control characters into visible glyphs, it
ends up losing the structure of the output, and that can sometimes make
things difficult to read. This PR attempts to alleviate that problem by
reinjecting an actual line break in the debug stream whenever an `LF`
control is received.
## PR Checklist
* [x] Closes#12312
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12312
## Validation Steps Performed
I've tested the updated debug tab with a number of different shells, and
also a couple of different apps. When there aren't many linefeeds in the
output, it's obviously not going to make much of a difference, but when
there are, I think it definitely improves the readability.
(cherry picked from commit 04478d1df0)
Service-Card-Id: 84116394
Service-Version: 1.14
If launch mode is set to full screen quake window is opened in full
screen.
## Validation Steps Performed
- Set startup > launch mode > full screen
- Launch quake window
- Quake window shouldn't be opened in full screen
Closes#12894
(cherry picked from commit 589286a357)
Service-Card-Id: 84116409
Service-Version: 1.14
In non-en-us locales, these tooltips can get really long and get clipped.
Closes MSFT:39603031
See Also #9913
(cherry picked from commit 32379c29f0)
Service-Card-Id: 84008281
Service-Version: 1.14
The main result of this fallback is that we attempt to launch wsl.exe
when the user hasn't installed or interacted with WSL. On our test
machines, that results in the creation of a wsl.exe process that tells
us precisely nothing; on WDAC managed machines it results in an Event
Log entry about spawning another (possibly blocked) process.
The registry is more reliable, and if the "API" it provides changes we
can just rev terminal.
Closes#11716
(cherry picked from commit f025c53dba)
Service-Card-Id: 83892843
Service-Version: 1.14
This commit fixes a minor race condition covered as part of #13368.
The member `_pfnHandoff` was read without the mutex `_mtx` being locked first.
The issue was solved by acquiring the lock early and running the entire
`s_StopListening` function with that lock held.
(cherry picked from commit 95a19624a4)
Service-Card-Id: 83893125
Service-Version: 1.14
See also: #12799, the origin of much of this.
This change evolved over multiple phases.
When we create a defterm connection in `TerminalPage::_OnNewConnection`,
we don't have the hosting HWND yet, so the tab gets created without one.
We'll later get called with the owner, in `Initialize`.
To remedy this, we need to:
* In `Initialize`, make sure to update any existing controls with the
new owner.
* In `ControlCore`, actually propogate the new owner down to the
connection
DefTerm launches don't actually request focus mode, so the Terminal
never sends them focus events. We need those focus events so that the
console can request foreground rights.
To remedy this, we need to:
* pass `--win32input` to the commandline used to initialize OpenConsole
in ConPTY mode. We request focus events at the same time we request
win32-input-mode.
* I also added `--resizeQuirk`, because _by all accounts that should be
there_. Resizing in defterm windows should be _wacky_ without it, and
I'm a little surprised we haven't seen any bugs due to this yet.
`ConsoleSetForeground` expects a `HANDLE` to the process we want to give
foreground rights to. The problem is, the wire format we used _also_
decided that a HANDLE value was a good idea. It's not. If we pass the
literal value of the HANDLE to the process from OpenConsole to conhost,
so conhost can call that API, the value that conhost uses there will
most likely be an invalid handle. The HANDLE's value is its value in
_OpenConsole_, not in conhost.
To remedy this, we need to:
* Just not forward `ConsoleSetForeground`. Turns out, we _can_ just call
that in OpenConsole safely. There's no validation. So just instantiate
a static version of the Win32 version of ConsoleControl, just to use
for SetForeground. (thanks Dustin)
* [x] Tested manually - Win+R `powershell`, `notepad` spawns on top.
Closes#13211
(cherry picked from commit 2a7dd8b730)
Service-Card-Id: 83026847
Service-Version: 1.14
It's not useful to notify users that WT can be made the default if it's already
clearly being used for handoff. This commit will suppresses the banner then.
## PR Checklist
* [x] Closes#13314
* [x] I work here
## Validation Steps Performed
* Modify `TerminalPage::ShowSetAsDefaultInfoBar` to not check for
`CascadiaSettings::IsDefaultTerminalSet()`
* Set Terminal Dev as the default
* Set incoming connections to open in the latest Terminal window
* Delete `state.json` after every test below
* Launching Terminal Dev shows the banner ✅
Launching `cmd.exe` dismisses the banner in the current Terminal ✅
* Launching `cmd.exe` launches Terminal Dev without banner ✅
(cherry picked from commit 24a53d4968)
Service-Card-Id: 83434412
Service-Version: 1.14
These files are vestigial, because we are also shipping (either as loose
files or embedded in resources.pri) precompiled xbf/xaml binary format
files.
This saves us almost 500kb on disk.
Fixes#11687
Validation
----------
I ran a local build and saw that it produced a working Terminal, packaged
and unpackaged.
(cherry picked from commit 0b97c7b5ca)
Service-Card-Id: 83425307
Service-Version: 1.14
## Summary of the Pull Request
When you execute a `cls` in the cmd shell, or `Clear-Host` in
PowerShell, we have a pair of shims that attempt to detect those
operations and forward an `ED3` sequence to conpty to clear the
scrollback.
If there was a linefeed at the bottom of the viewport immediately
prior to those functions being called, that event might still be
pending, and only forwarded to conpty after the `ED3`. The result
then is a line pushed into the scrollback that shouldn't be there.
This PR tries to avoid that situation by forcing the renderer to
flush before the `ED3` sequence is sent.
## References
The `cls` and `Clear-Host` shims were originally added in PR #5627.
## PR Checklist
* [x] Closes#5770
* [x] Closes#13320
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not
checked, I'm ready to accept this work might be rejected in favor of a
different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I've manually tested in PowerShell with `echo Hello; Clear-Host` (this
is the only way I could reliably reproduce the original problem), and in
the cmd shell with `cls`. Both cases are now working as expected.
(cherry picked from commit 08c2f350e6)
Service-Card-Id: 83388911
Service-Version: 1.14
When we send this ShowWindow message, if we send it to it's
going to need to get processed by the window message thread before
returning. We're handling this message under lock. However, the first
thing the conhost message thread does is lock the console. That'll
deadlock us. So unlock here, first, to let the message thread deal with
this message, then re-lock so later on this thread can unlock again
safely.
* [x] Closes#13301
* [x] Tested conhost
* [x] Tested terminal
(cherry picked from commit 848314ef17)
Service-Card-Id: 83224338
Service-Version: 1.14
Adds an accelerator key for the shell extension: `T` for stable, `P` for preview and `D` for dev.
# Validation
Ran a dev build and saw the keyboard accelerator assigned.
Closes#13061
(cherry picked from commit 75e462441d)
Service-Card-Id: 83524177
Service-Version: 1.14
As described in #13238. libuv sends a focus event to jiggle the handle. Now that we support focus events as VT input (#12900), we'd translate those focus events to VT input as well. That combination of things caused exiting neovim to emit a `\x1b[O` to the input line of the shell when exited.
To fix this, we're going to secretly filter out any focus events that came from the API, before translating to VT. We're fortunate here, the `FOCUS_EVENT_RECORD` version of the ctor is only called by the API.
* [x] Closes#13238
(cherry picked from commit b22684e697)
Service-Card-Id: 83027721
Service-Version: 1.14
This fixes the crashes caused by using a screen reader when in an app that uses the alt buffer via two changes:
1. Fix `Terminal::ViewEndIndex()`
- `UiaTextRangeBase` receives a coordinate that is outside of the bounds of the text buffer via the following chain of functions... `_getDocumentEnd()` --> `GetLastNonSpaceCharacter()` --> `_getOptimizedBufferSize()` --> `GetTextBufferEndPoisition()` --> `ViewEndIndex()`
- Since support for the alt buffer was added recently, `ViewEndIndex()` was recently changed, so that explains why this issue came up recently. We were accidentally setting the view end index to `height` instead of `height-1`. Thanks @j4james for finding this!
- The UIA code would get the "exclusive end" of the alt buffer. Since it was using `ViewEndIndex()` to calculate that, it was one more than it should be. The UIA code has explicit allowance for "one past the end of the viewport" in its `IsInBounds()` check. Since the `ViewEndIndex()` is way beyond that, it's not allowed, hitting the fail fast.
2. Replace `FAIL_FAST_IF` with `assert`
- These fail fast calls have caused so many issues with our UIA code. Those checks still provide value, but they shouldn't take the whole app down. This change replaces the `Viewport` and `UiaTextRangeBase` fail fasts with asserts to still perform those checks, but not take down the entire app in release builds.
Closes#13183
While using Narrator...
- opened nano in bash
- generated text and scrolled in nano
- generated text and scrolled in PowerShell
(cherry picked from commit 94e1697a48)
Service-Card-Id: 82972865
Service-Version: 1.14
## Summary of the Pull Request
When a profile gets deleted, we were navigating to the next item assuming it was a profile when it may not be. This commit fixes this by checking the tag of the next menu item before we navigate to it.
## PR Checklist
* [x] Closes#13125
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Deleting the last profile in the SUI doesn't cause a crash
(cherry picked from commit 4e20a8631c)
Service-Card-Id: 82925050
Service-Version: 1.14
MSFT-33471786 is one of the most common crashes we have right now.
Memory dumps suggest that `VtEngine::UpdateViewport` is called with a rectangle
like `(0, 46, 119, 29)` (left, top, right, bottom), which is a rectangle of
negative height. When the `_invalidMap` is resized the negative size gets
turned into a very large unsigned integer, which results in an OOM exception,
crashing OpenConsole.
`VtEngine::UpdateViewport` is called by `Renderer::_CheckViewportAndScroll`
which holds a (cached) old and a new viewport. The old viewport was
`(0, 46, 119, 75)` which is exceedingly similar to the invalid, new viewport.
It's bottom coordinate is also coincidentally larger by exactly 46 (top).
The viewport comes from the `SCREEN_INFORMATION` class whose `SetViewport`
function was highly suspicious as it has a branch which updates the bottom
to be the buffer height, but leaves the top unmodified.
`SCREEN_INFORMATION::SetViewport` is called by `SetConsoleWindowInfo` which
processes user-provided data. A repro of the crash can be constructed with:
```
SMALL_RECT rect{0, 46, 119, 75};
SetConsoleWindowInfo(GetStdHandle(STD_OUTPUT_HANDLE), TRUE, &rect);
```
Closes#13193
Closes MSFT-33471786
## Validation Steps Performed
Ensured the following code doesn't crash when run under Windows Terminal:
```
SMALL_RECT rect{0, 46, 119, 75};
SetConsoleWindowInfo(GetStdHandle(STD_OUTPUT_HANDLE), TRUE, &rect);
```
(cherry picked from commit 7dbe741e1a)
Service-Card-Id: 82642053
Service-Version: 1.14
This commit hides the "Open in Terminal" context menu option when the
context menu is opened in a non-filesystem path like "Quick Actions".
Closes#12578
(cherry picked from commit fb1491a4af)
Service-Card-Id: 83524152
Service-Version: 1.14
## Summary of the Pull Request
Add `Find` to tab context menu as describe in issue #5633.
## PR Checklist
* [x] Closes#5633
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
Just wanted to solve `Easy Starter` issue, so any corrections/suggestions welcome. There's a couple of points I'm not sure of
* Placement of item within menu, currently it's at the end before close tab block.
* Should it be named longer, something like `Find in Tab` of just `Find` is fine?
* The workaround for focus similar to tab rename is a bit annoying, especially because it required adding a method to `TermControl` but without it find window obviously opens without focus which is bad.
## Validation Steps Performed
Open menu, press menu item try to find things via opened find dialog.
(cherry picked from commit b851b0d3f4)
Service-Card-Id: 83524184
Service-Version: 1.14
This trivial commit simplifies `Utf16Parser::IsLeading/TrailingSurrogate`
methods, by replacing `<bitset>` with a simple, equivalent range check.
(cherry picked from commit 1db47ff8dc)
Service-Card-Id: 83524156
Service-Version: 1.14
## Summary of the Pull Request
⚠️This targets release-1.14⚠️
Backport of #13358
This PR fixes a number of interactions between `copyOnSelect` and keyboard selection. Sometimes the selection just wouldn't be cleared or copied appropriately.
I wrote a whole flowchart of expected behavior with copy on select:
- enable `copyOnSelect`
- make a selection with the mouse
- ✅ right-click should copy the text --> clear the selection --> paste
- use keyboard selection to quick-edit the existing selection
- ✅ `copy` action should clear the selection
- ✅ right-click should copy the text --> clear the selection --> paste
A port of commit 0c5a1e9 from #13358.
This fixes an oversight from #13353. That ended up not fixing when trying to move past the top boundary.
This is also a better fix overall. By moving the fix to `_MoveByChar`, we have consistency between all the `_MoveByX` functions in that they automatically clamp to be within the scroll area.
## Summary of the Pull Request
1.14 port of #13318
Introduced in #10824, this fixes a bug where you could use keyboard selection to move below the scroll area. Instead, we now clamp movement to the mutable viewport (aka the scrollable area). Specifically, we only clamp the y-coordinate to make the experience similar to that of mouse selection.
## Validation Steps Performed
✅ (no output) try to move past bottom of viewport
✅ (with output, at bottom of scroll area) try to move past viewport
✅ (with output, NOT at bottom of scroll area) try to move past viewport
✅ try to move past top of viewport
This is a big hammer to put out this fire. We're keeping the hiding around for now, cause we think that's likely the one that the internal tests use that we really care about here. If we need to bring this back, we can.
* [x] Closes#13158
* [x] Closes#13162
* [x] Validated these both manually
* [x] `[Native]::ShowWindow([Native]::GetConsoleWindow(), 6)` still works
(cherry picked from commit 11b810e403)
Service-Card-Id: 82371517
Service-Version: 1.14
Prevents a null pointer dereference when attempting to split a settings tab, due to it not being a terminal tab.
* [x] Closes#13166
## Validation Steps Performed
Manually tested.
(cherry picked from commit 6439b4d807)
Service-Card-Id: 82395540
Service-Version: 1.14
This only impacts the UI. We can take a workitem to rename the loc data
later. When the user specifies zh-Hans/zh-Hant, the resource mapper does
the right thing.
Related to #8984
(cherry picked from commit 78852e04ec)
Service-Card-Id: 82315897
Service-Version: 1.14
Use a throttled update to update our window state. Throttling should prevent scenarios where the Terminal window state and PTY window state get de-sync'd, and cause the window to minimize/restore constantly in a loop. "Should" is doing a lot of work in this sentence.
A 200ms delay was chosen because it's the typical animation timeout in Windows. This does result in a delay between the PTY requesting a change to the window state and the Terminal realizing it, but should mitigate issues where the Terminal and PTY get desync'd.
I think we're overall not super confident that this fixes the root causes of the issue. Rather, we're hopeful that a small amount of throttling here should leave time for the Terminal and pty to sync back up. We're comfortable enough with that as a bandaid for 1.14 preview, to see how this behaves in the wild.
(cherry picked from commit c5fad74c54)
Service-Card-Id: 82315892
Service-Version: 1.14
ThemeResources are a persistent pain.
Regressed in #13083. See also #12775 et. al.
We can't just put those here though as StaticResources, because XAML will evaluate their values when the App is first loaded, and we'll always use the value from the OS theme, regarless of the requested theme. Kinda the same thing we've had to do with TabViewBackground in the past.
* [x] Fixes something we noticed right before shipping
(cherry picked from commit bb03b00ebf)
Service-Card-Id: 82303612
Service-Version: 1.14
We're doing it this way because ThemeResources are tricky. We
default in XAML to using the appropriate ThemeResource background
color for our TabRow. When tabs in the titlebar are _disabled_,
this will ensure that the tab row has the correct theme-dependent
value. When tabs in the titlebar are _enabled_ (the default),
we'll switch the BG to Transparent, to let the Titlebar Control's
background be used as the BG for the tab row.
We can't do it the other way around (default to Transparent, only
switch to a color when disabling tabs in the titlebar), because
looking up the correct ThemeResource from and App dictionary is a
capital-H Hard problem.
* [x] Closes#13143
* [x] I work here
* [x] validated manually:
- [x] showTabsInTitlebar: false, true
- [x] useAcrylicInTabRow: false, true
- [x] theme: light, dark
* [x] Need to check if this is regressed the same in 1.13. I suspect it is.
(cherry picked from commit 4c333536b4)
Service-Card-Id: 82298858
Service-Version: 1.14
Well this one feels dumb.
Make sure to also initially set the visibility of ConPTY windows created for DefTerm connections.
* [x] Closes#13066 for real.
* [x] tested manually.
(cherry picked from commit d82af9367f)
Service-Card-Id: 82146739
Service-Version: 1.14
A bad merge, that actually revealed a horrible bug.
There was a secret conflict between the code in #12526 and #12515. 69b77ca was a bad merge that hid just how bad the issue was. Fixing the one line `nullptr`->`this` in `InteractivityFactory` resulted in a window that would flash uncontrollably, as it minimized and restored itself in a loop. Great.
This can seemingly be fixed by making sure that the conpty window is initially created with the owner already set, rather than relying on a `SetParent` call in post. This does pose some complications for the #1256 future we're approaching. However, this is a blocking bug _now_, and we can figure out the tearout/`SetParent` thing in post.
* fixes#13066.
* Tested with the script in that issue.
* Window doesn't flash uncontrollably.
* `gci | ogv` still works right
* I work here.
* Opening a new tab doesn't spontaneously cause the window to minimize
* Restoring from minimized doesn't yeet focus to an invisible window
* Opening a new tab doesn't yeet focus to an invisible window
* There _is_ a viable way to call `GetAncestor` s.t. it returns the Terminal's hwnd in Terminal, and the console's in Conhost
The `SW_SHOWNOACTIVATE` change is also quite load bearing. With just `SW_NORMAL`, the pseudo window (which is invisible!) gets activated whenever the terminal window is restored from minimized. That's BAD.
There's actually more to this as well.
Calling `SetParent` on a window that is `WS_VISIBLE` will cause the OS to hide the window, make it a _child_ window, then call `SW_SHOW` on the window to re-show it. `SW_SHOW`, however, will cause the OS to also set that window as the _foreground_ window, which would result in the pty's hwnd stealing the foreground away from the owning terminal window. That's bad.
`SetWindowLongPtr` seems to do the job of changing who the window owner is, without all the other side effects of reparenting the window.
Without `SetParent`, however, the pty HWND is no longer a descendant of the Terminal HWND, so that means `GA_ROOT` can no longer be used to find the owner's hwnd. For even more insanity, without `WS_POPUP`, none of the values of `GetAncestor` will actually get the terminal HWND. So, now we also need `WS_POPUP` on the pty hwnd. To get at the Terminal hwnd, you'll need
```c++
GetAncestor(GetConsoleWindow(), GA_ROOTOWNER)
```
(cherry picked from commit 77215d9d77)
Service-Card-Id: 82170678
Service-Version: 1.14
## Summary of the Pull Request
When the conpty passthrough mode is enabled, it often needs to send `DSR-CPR` queries (cursor position reports) to the client terminal to obtain the current cursor position. However, the code that originally handled the responses to these queries got broken by the refactoring of the `ConGetSet` API. This PR is an attempt to correct that regression.
## References
The conpty passthrough mode was introduced in PR #11264.
The refactoring that broke the cursor position handling was in PR #12703.
## PR Checklist
* [x] Closes#13106
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
Prior to the `ConGetSet` refactoring, the code that handled `DSR-CPR` responses (`InteractDispatch::MoveCursor`) would pass the cursor position to `ConGetSet::SetCursorPosition`, which in turn would forward it to the `SetConsoleCursorPositionImpl` API, and from there to the `VtIo` class.
After the refactor, all of those intermediate steps were removed - the cursor was simply updated directly in `InteractDispatch::MoveCursor`, and the `VtIo` call was moved from `SetConsoleCursorPositionImpl` to `InteractDispatch` (since that was the only place it was actually required).
However, when the conpty passthrough mode was introduced - which happened in parallel - it relied on the `SetConsoleCursorPositionImpl` API being called from `InteractDispatch` in order to handle its own `DSR-CPR` responses, and that's why things stopped working when the two PRs merged.
So what I've done now is made `InteractDispatch::MoveCursor` method call `SetConsoleCursorPositionImpl` again (although without the intermediate `ConGetSet` overhead), and moved the `VtIo::SetCursorPosition` call back into `SetConsoleCursorPositionImpl`.
This is not ideal, and there are still a bunch of problems with the `DSR-CPR` handling in passthrough mode, but it's at least as good as it was before.
## Validation Steps Performed
I've just manually tested various shells with passthrough mode enabled, and confirmed that they're working better now. There are still issues, but nothing that wasn't already a problem in the initial implementation, at least as far as I can tell.
(cherry picked from commit e1086de512)
Service-Card-Id: 82005205
Service-Version: 1.14
This regressed in ad2358d.
We're interested in the size of the viewport only, but it can shift up/down
during scrolling. In these situations we shouldn't resize our buffers of course.
## Validation Steps Performed
* Scroll
* Not setting `ApiInvalidations::Size` ✅
(cherry picked from commit fa6b066747)
Service-Card-Id: 82005202
Service-Version: 1.14
Adds the `experimental.useBackgroundImageForWindow` global setting introduced in #12893 to the schema.
(cherry picked from commit b699f9275f)
Service-Card-Id: 82002294
Service-Version: 1.14
This reverts commit 14098d71f2.
## Summary of the Pull Request
@zadjii-msft found that this is causing persisted windows on a secondary monitor to shrink a little each time. We're choosing to revert this commit until that gets resolved.
## References
#12979
(cherry picked from commit 6ffc3dc7a8)
Service-Card-Id: 81910920
Service-Version: 1.14
Fixes the following issues:
* `desktopWallpaper` not working
* switching tabs/panes causes the background to flicker
* settings preview having a transparent background
## PR Checklist
* [x] Closes#13002
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
Tested the 3 cases above. ✅
(cherry picked from commit 0630b18eff)
Service-Card-Id: 81868221
Service-Version: 1.14
## Summary of the Pull Request
For some reason, the PGO tests (specifically the `RunMakeKillTabs` test) started to fail after #12979 merged. After closer inspection, the test was actually improperly written. We should be using <kbd>ctrl+shift+t</kbd> to open new tabs, not <kbd>alt+shift+t</kbd>. Presumably, the <kbd>alt</kbd> was copied over from the previous test, because they look _very_ similar.
So I went ahead and fixed the test, and it now (1) tests what it's intended to test and (2) doesn't fail. Why did #12979 cause the tests to fail? idk, but it works now.
## References
#10071 - Introduce PGO Tests
## Validation Steps Performed
Ran PGO tests locally and confirmed that it works.
Ran PGO pipeline and confirmed that it works.
(cherry picked from commit 17d1e2437c)
Service-Card-Id: 81863976
Service-Version: 1.14
When the buffer is resized with a reflow, we were previously calculating
the new virtual bottom based on the position of last non-space
character. If the viewport was largely blank when resized, this could
result in the new virtual bottom being higher than it should be.
This PR attempts to address that problem by restoring the virtual bottom
to a position that is the same distance from the cursor row as it was
prior to the resize.
This was a regression introduced in PR #12972.
We still take the last non-space row into account when determining the
virtual bottom, because if the content of the screen is forced to wrap,
the virtual bottom will need to be lower (relative to the cursor) than
it was before.
We also need to check that we don't overflow the bottom of the buffer,
which can occur when the viewport is at the bottom of the buffer, and
the cursor position is pushed down as a result of content wrapping above
it.
I've manually confirmed that this fixes the problem reported in issue
#13078, and I've also extended the existing `RefreshWithReflow` unit
test to cover that particular scenario.
Closes#13078
(cherry picked from commit c2f830843a)
Service-Card-Id: 81864034
Service-Version: 1.14
Fixes the SUI background being red in high contrast mode. The issue was
that `SolidBackgroundFillColorTertiary` purposefully has a bad High
Contrast color[^1].
The fix was to be explicit in the theme resources so that
`SolidBackgroundFillColorTertiary` is used in light and dark mode, but
the standard high contrast one is used in high contrast mode. Since the
page is the top-level XAML element in the Editor project, I had to
introduce this in the App.xaml resources so that the page can find the
theme resource.
Closes#13065Closes#13070
[^1]: 40df43a61c/dev/CommonStyles/Common_themeresources_any.xaml (L650-L651)
## Summary of the Pull Request
When calculating the position of the virtual bottom after a resize with
reflow, it was possible for it to end up less than the height of the
viewport. This meant that the top of the virtual viewport would be
negative, which resulted in other operations failing further down the
line. This PR updates the virtual bottom calculation to fix that
scenario.
## References
This was probably a regression introduced in PR #12972.
## PR Checklist
* [x] Closes#13034
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #13034
## Validation Steps Performed
I wasn't able to replicate the exact case described in issue #13034,
because I don't have Windows 11, so can't configure the default
terminal. However, I was able to reproduce a similar failure using a
`SetConsoleScreenBufferInfoEx` call, and I've confirmed that this PR
has fixed that.
I've also added another screen buffer test to make sure the
`ResizeWithReflow` method doesn't shrink the virtual bottom when
resizing at the top of the buffer.
When we start up, our window is initially just a frame with a transparent content area. We're gonna do all this startup init on the UI thread, so the UI won't actually paint till it's all done. This results in a few frames where the frame is visible, before the page paints for the first time, before any tabs appears, etc.
To mitigate this, we're gonna wait for the UI thread to finish everything it's gotta do for the initial init, and _then_ fire our Initialized event. By waiting for everything else to finish (`CoreDispatcherPriority::Low`), we let all the tabs and panes actually get created. In the window layer, we're gonna ~cloak~ just not show the window till this event is fired, so we don't actually see this frame until we're actually all ready to go. **This will result in the window seemingly not loading as fast**, but it will actually take exactly the same amount of time before it's usable.
I also experimented with drawing a solid BG color before the initialization is finished. However, there are still a few frames after the frame is displayed before the XAML content first draws, so that didn't actually resolve any issues.
* [x] Closes#11561
* [x] Tested manually
* [x] I work here.
* [x] Accidentally also closes#9053. By switching the initial call from `ShowWindow(SW_SHOW)` to `ShowWindow(SW_SHOWDEFAULT)`, we actually obey the startup info now.
Adds the `selectAll` action which can be used to select all text in the buffer (regardless of whether a selection is present).
## References
#3663 - Mark Mode
#4993 - [Scenario] Keyboard selection
## PR Checklist
* [x] Closes#1469
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
I've made it such that selecting the "entire buffer" really just selects up to the mutable viewport. This seems like a nice QOL improvement since there's generally nothing past that.
When the user selects all, the viewport does not move. This is consistent with CMD behavior and is intended to allow the user to not lose context when selecting everything.
A minor change had to be made to the DxRenderer because this uncovered an underflow issue. Basically, the selection rects were handed to the DxEngine relative to the viewport (which means that some had a negative y-value). At some point, those rects were stored into `size_t`s, resulting in an underflow issue. This caused the renderer to behave strangely when rendering the selection. Generally, these kinds of issues weren't really noticed because selection would always modify a portion of the viewport.
Funny enough, in a way, this satisfies the "mark mode" scenario because the user now has a way to initiate a selection using only the keyboard. Though this isn't ideal, just a fun thing to point out (that's why I'm not closing the mark mode issue).
## Validation Steps Performed
- Verified using DxEngine and AtlasEngine
- select all --> keyboard selection --> start moving the top-left endpoint (and scroll to there)
- select all --> do not scroll automatically
Turns out if you add that Delete handler there, then every time you navigate to the profile, we'll add another Delete handler to the list of handlers. That's bad - that'll cause us to try and delete the profile multiple times.
The repro I had before was 100%, now it's fixed.
* [x] Closes#13017
`TextAttribute` and `TextColor` are commonly used structures in hot paths.
This commit replaces more complex comparisons where each field is compared
independently with a single call to `memcmp`. This compiles down to just
a few instructions. This reduces code and binary size and improves
performance for paths were `TextAttribute`s need to be compared.
## PR Checklist
* [x] Supports #10563
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* termbench still works ✔️
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
## Summary of the Pull Request
As discussed in team sync. Ignore `newTab` actions with a profile index greater than the number of profiles.
## PR Checklist
* [x] Closes#11114
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - maybe❓
In classic fashion, we never run the LocalTests locally before committing, so stuff breaks from time to time.
This time, the main trick was that the tests had a pretty hardcore dependency on the inner workings of `_PreviewActionHandler`, and when that changed, they broke.
Also, there was a weird crash I saw when I had the default terminal set to the Dev build version. That crash would let the test contents pass, but ultimately fail when TAEF tore down the conhost. Unsetting that fixed the crash 🤷Closes#12158
## Summary of the Pull Request
When `TerminalDispatch` was merged with `AdaptDispatch` in PR #13024,
that broke the Terminal's `EraseAll` operation in the alt buffer. The
problem was that the `EraseAll` implementation makes a call to
`SetViewportPosition` which wasn't taking the alt buffer into account,
and thus modified the main viewport instead.
This PR corrects that mistake. If we're in the alt buffer, the
`SetViewportPosition` method now does nothing, since the alt buffer
viewport should always be at 0,0.
## References
This was a regression introduced in PR #13024.
## PR Checklist
* [x] Closes#13038
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #13038
## Validation Steps Performed
I've confirmed that the test case reported in issue #13038 is no longer
failing. I've also made sure the `ED 2` and `ED 3` sequences are still
working correctly in the main buffer.
To quote an internal wiki:
> It generally provides improved footprint and performance over the
> existing default heap for native win32 applications.
It is apparently the default heap on ARM64, and for all UWPs.
This heap has different allocation and compaction characteristics.
I am not sure how it will impact terminal.
## Summary of the Pull Request
Make sure we set `Name` and `FullDescription` on expander-style settings in the SUI
## PR Checklist
* [x] Closes#13019
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Accessibility insights now shows the name/full description for the expander-style settings
## Summary of the Pull Request
This PR replaces the `TerminalDispatch` class with the `AdaptDispatch` class from conhost, so we're no longer duplicating the VT functionality in two places. It also gives us a more complete VT implementation on the Terminal side, so it should work better in pass-through mode.
## References
This is essentially part two of PR #12703.
## PR Checklist
* [x] Closes#3849
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #12662
## Detailed Description of the Pull Request / Additional comments
The first thing was to give the `ConGetSet` interface a new name, since it's now no longer specific to conhost. I went with `ITerminalApi`, since that was the equivalent interface on the terminal side, and it still seemed like a generic enough name. I also changed the way the api is managed by the `AdaptDispatch` class, so it's now stored as a reference rather than a `unique_ptr`, which more closely matches the way the `TerminalDispatch` class worked.
I then had to make sure that `AdaptDispatch` actually included all of the functionality currently in `TerminalDispatch`. That meant copying across the code for bracketed paste mode, the copy to clipboard operation, and the various ConEmu OSC operations. This also required a few new methods to the `ConGetSet`/`ITerminalApi` interface, but for now these are just stubs in conhost.
Then there were a few thing in the api interface that needed cleaning up. The `ReparentWindow` method doesn't belong there, so I've moved that into `PtySignalInputThread` class. And the `WriteInput` method was too low-level for the Terminal requirements, so I've replaced that with a `ReturnResponse` method which takes a `wstring_view`.
It was then a matter of getting the `Terminal` class to implement all the methods in the new `ITerminalApi` interface that it didn't already have. This was mostly mapping to existing functionality, but there are still a number of methods that I've had to leave as stubs for now. However, what we have is still good enough that I could then nuke the `TerminalDispatch` class from the Terminal code and replace it with `AdaptDispatch`.
One oddity that came up in testing, though, was the `AdaptDispatch` implementation of `EraseAll` would push a blank line into the scrollback when called on an empty buffer, whereas the previous terminal implementation did not. That caused problems for the conpty connection, because one of the first things it does on startup is send an `ED 2` sequence. I've now updated the `AdaptDispatch` implementation to match the behavior of the terminal implementation in that regard.
Another problem was that the terminal implementation of the color table commands had special handling for the background color to notify the application window that it needed to repaint the background. I didn't want to have to push the color table operations through the `ITerminalApi` interface, so I've instead moved the handling of the background update into the renderer, initiated by a flag on the `TriggerRefreshAll` method.
## Validation Steps Performed
Surprisingly this PR didn't require a lot of changes to get the unit tests working again. There were just a few methods used from the original `ITerminalApi` that have now been removed, and which needed an equivalent replacement. Also the updated behavior of the `EraseAll` method in conhost resulted in a change to the expected cursor position in one of the screen buffer tests.
In terms of manual testing, I've tried out all the different shells in Windows Terminal to make sure there wasn't anything obviously wrong. And I've run a bunch of the tests from _vttest_ to try and get a wider coverage of the VT functionality, and confirmed everything still works at least as well as it used to. I've also run some of my own tests to verify the operations that had to be copied from `TerminalDispatch` to `AdaptDispatch`.
`InteractivityOneCore` and `RendererWddmCon` were the last two remaining
projects which are relevant for our internal console builds, but couldn't be
easily compiled publicly by users on GitHub. This commit adds all definitions
required to compile the two projects into dysfunctional libraries at least.
(Since the added definitions are deliberately incorrect.)
Additionally this commit fixes the AuditMode build for the two projects.
## Validation Steps Performed
The two new projects compile fine.
As noted in the issue. There's a case where backing up the `lineEnd` can result in the `lineEnd` pointing at exactly the `lineBegin`, which results in an empty view, which causes all sorts of pain later.
Instead, just return early in this case.
* tested with an 80x24 conhost
* tested with an 79x24 conhost
I also tried making this a FAILFAST or a THROW_HR, but the failfast immediately died (of course it did), and the throw would result in a few frames where the composition was just... entirely not displayed? Probably not what we wanted.
* [x] Closes#12730
Modified the scope of input control, it used to be `Text`, now it is
`AlphanumericHalfWidth`. This input scope actually accepts any
characters, but English characters are preferred, and the soft keyboard
also displays English by default.
This should improve user friendliness for users using composition mode
input methods.
As a user who uses the composition mode input method, in applications
like windows terminal that should usually be input in English, it is
always required to manually switch to English mode by pressing Shift
before entering commands.
One keystroke is not a problem, but often for some reason there is no or
no successful switching, and additional more keystrokes are required to
clear the wrong input.
The input method that comes with windows will automatically switch to
English mode for a few programs such as conhost, but windows terminal is
not in this list.
This change should have no negative impact. Even if someone does tend to
use a shell oriented towards composition characters or non-alpha
letters, there should also were more users who in the same language are
more inclined to English characters shells, for example, cmd,
powershell, bash that comes with windows.
If there's any reason to have to keep the Text inputScope, maybe making
this setting customizable via `settings.json` would be a good idea, but
I don't see the need to do this, `AlphanumericHalfWidth` is perfect.
Closes#12731
`_api.cellCount` caches the `TextBuffer` size in AtlasEngine.
Calculating it based on the `_api.sizeInPixel` is incorrect as the
`TextBuffer` size doesn't necessarily have to be the size of the window.
This can occur when the window is resized, as the main thread is receiving its
`WM_SIZE` message and resizing the `TextBuffer` concurrently with the render
thread performing a render pass and AtlasEngine checking the `GetClientRect`.
In order to inform `AtlasEngine` about the initial buffer size, `Renderer`
was modified to also invoke `UpdateViewport()` on the first render cycle.
The only other user of `UpdateViewport()` is `VtEngine` which used to call
`InvalidateAll()` in these situations. In order to prevent the `InvalidateAll()`
call, `VtEngine::UpdateViewport()` was modified to suppress this.
## Validation Steps Performed
* Resizing wide characters doesn't crash the terminal anymore ✅
* The additional call to `UpdateViewport()` doesn't break VtEngine ✅
There are 3 en-dashes`(U+2013)` in the file when they should be hyphen `(U+002D)`.
This character causes the file to fail to compile in a non-utf8 encoding environment.
Just modified 3 characters to make it fall within the scope of ascii and keep it consistent with other files of the project.
The "virtual bottom" marks the last line of the mutable viewport area,
which is the part of the buffer that VT sequences can write to. This
region should typically only move downwards as new lines are added to
the buffer, but there were a number of cases where it was incorrectly
being moved up, or moved down further than necessary. This PR attempts
to fix that.
There was an earlier, unsuccessful attempt to fix this in PR #9770 which
was later reverted (issue #9872 was the reason it had to be reverted).
PRs #2666, #2705, and #5317 were fixes for related virtual viewport
problems, some of which have either been extended or superseded by this
PR.
`SetConsoleCursorPositionImpl` is one of the cases that actually does
need to move the virtual viewport upwards sometimes, in particular when
the cmd shell resets the buffer with a `CLS` command. But when this
operation "snaps" the viewport to the location of the cursor, it needs
to use the virtual viewport as the frame of reference. This was
partially addressed by PR #2705, but that only applied in
terminal-scrolling mode, so I've now applied that fix regardless of the
mode.
`SetViewportOrigin` takes a flag which determines whether it will also
move the virtual bottom to match the visible viewport. In some case this
is appropriate (`SetConsoleCursorPositionImpl` being one example), but
in other cases (e.g. when panning the viewport downwards in the
`AdjustCursorPosition` function), it should only be allowed to move
downwards. We can't just not set the update flag in those cases, because
that also determines whether or not the viewport would be clamped, and
we don't want change that. So what I've done is limit
`SetViewportOrigin` to only move the virtual bottom downwards, and added
an explicit `UpdateBottom` call in those places that may also require
upward movement.
`ResizeWindow` in the `ConhostInternalGetSet` class has a similar
problem to `SetConsoleCursorPositionImpl`, in that it's updating the
viewport to account for the new size, but if that visible viewport is
scrolled back or forward, it would end up placing the virtual viewport
in the wrong place. So again the solution here was to use the virtual
viewport as the frame of reference for the position. However, if the
viewport is being shrunk, this can still result in the cursor falling
below the bottom, so we need an additional check to adjust for that.
This can't be applied in pty mode, though, because that would break the
conpty resizing operation.
`_InternalSetViewportSize` comes into play when resizing the window
manually, and again the viewport after the resize can end up truncating
the virtual bottom if not handled correctly. This was partially
addressed in the original code by clamping the new viewport above the
virtual bottom under certain conditions, and only in terminal scrolling
mode. I've replaced that with a new algorithm which links the virtual
bottom to the visible viewport bottom if the two intersect, but
otherwise leaves it unchanged. This applies regardless of the scrolling
mode.
`ResizeWithReflow` is another sizing operation that can affect the
virtual bottom. This occurs when a change of the window width requires
the buffer to be reflowed, and we need to reposition the viewport in the
newly generated buffer. Previously we were just setting the virtual
bottom to align with the new visible viewport, but that could easily
result in the buffer truncation if the visible viewport was scrolled
back at the time. We now set the virtual bottom to the last non-space
row, or the cursor row (whichever is larger). There'll be edge cases
where this is probably not ideal, but it should still work reasonably
well.
`MakeCursorVisible` was another case where the virtual bottom was being
updated (when requested with a flag) via a `SetViewportOrigin` call.
When I checked all the places it was used, though, none of them actually
required that behavior, and doing so could result in the virtual bottom
being incorrectly positioned, even after `SetViewportOrigin` was limited
to moving the virtual bottom downwards. So I've now made it so that
`MakeCursorVisible` never updates the virtual bottom.
`SelectAll` in the `Selection` class was a similar case. It was calling
`SetViewportOrigin` with the `updateBottom` flag set when that really
wasn't necessary and could result in the virtual bottom being
incorrectly set. I've changed the flag to false now.
## Validation Steps Performed
I've manually confirmed that the test cases in issue #9754 are working
now, except for the one involving margins, which is bigger problem with
`AdjustCursorPosition` which will need to be addressed separately.
I've also double checked the test cases from several other virtual
bottom issues (#1206, #1222, #5302, and #9872), and confirmed that
they're still working correctly with these changes.
And I've added a few screen buffer tests in which I've tried to cover as
many of the problematic code paths as possible.
Closes#9754
## Summary of the Pull Request
Ensures the tab close button color matches the text color.
## PR Checklist
* [x] Closes#13010
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
Also re-ordered and aligned the properties cleared in the `_ClearTabBackgroundColor()` method to match `_ApplyTabColor()`.
## Validation Steps Performed
Manually tested
This pull request introduces a packaging phase that emits
Microsoft.Windows.Console.ConPTY, a nuget package that contains the
pseudoconsole API as well as the requisite copies of conhost.
* winconpty learned to load a version of OpenConsole.exe specific to the
processor architecture on its hosting machine
* the package, as well as its contents, is signed properly and is nearly
ready for distribution via nuget.org
* the API in conpty-static.h has been adjusted to expose
CreatePseudoConsoleAsUser and stamp out the correct DLL import/export
annotations.
* getting .NET to play right was somewhat challenging, but I tested this
against .NET 6.0 and it seemed to work properly; it shipped conpty.dll
in the right places, and it shipped OpenConsole.exe next to the
published application.
In the future, we could provide an interop assembly for C# consumers;
that is, unfortunately, out of scope today.
Closes#3577Closes#3568
Obsoletes #1130
Propagate show/hide window calls against the ConPTY pseudo window to the Terminal
## PR Checklist
* [x] Closes#12570
* [x] I work here
* [x] Manual Tests passed
* [x] Spec Link: →[Doc Link](https://github.com/microsoft/terminal/blob/dev/miniksa/msgs/doc/specs/%2312570%20-%20Show%20Hide%20operations%20on%20GetConsoleWindow%20via%20PTY.md)←
## Detailed Description of the Pull Request / Additional comments
- See the spec. It's pretty much everything I went through deciding on this.
## Validation Steps Performed
- [x] Manual validation against scratch application calling all of the `::ShowWindow` commands against the pseudo console "fake window" and observing the real terminal window state
If we are building a branch called "release-*", we will also change the
NuGet suffix to "preview". If we don't do that, XES will set the suffix
to "release1" because it truncates the value after the first period. In
general, though, we want to disable the suffix entirely if we're Release
branded while on a release branch.
In effect:
BRANCH / BRANDING | Release | Preview
------------------|------------------------|------------------------
release-* | 1.12.20220427 | 1.13.20220427-preview
all others | 1.14.20220427-mybranch | 1.14.20220427-mybranch
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes#6028
Setting is "experimental.useBackgroundImageForWindow"
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
https://github.com/microsoft/terminal/issues/6028
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#6028
* [X] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated. I read CONTRIBUTING.md, but I'm not sure if a spec is needed for an experimental feature such as this one.
* [ ] Schema updated. I added a JSON key, not sure where I need to update it.
* [X] I've discussed this with core contributors already. Somewhat discussed in https://github.com/microsoft/terminal/issues/6028
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here
## Detailed Description of the Pull Request / Additional comments -->
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Set ` "experimental.useBackgroundImageForWindow": true` and a bg image for one profile, then make splits and tabs and make sure the bg updates accordingly:
I also did the same with the setting off to make sure it still works correctly and didn't break. And I made sure opening the settings tab does not crash or show the bg image.
#4015 requires sweeping changes in order to allow a migration of our buffer
coordinates from `int16_t` to `int32_t`. This commit reduces the size of
future commits by using type inference wherever possible, dropping the
need to manually adjust types throughout the project later.
As an added bonus this commit standardizes the alignment of cv qualifiers
to be always left of the type (e.g. `const T&` instead of `T const&`).
The migration to type inference with `auto` was mostly done
using JetBrains Resharper with some manual intervention and the
standardization of cv qualifier alignment using clang-format 14.
## References
This is preparation work for #4015.
## Validation Steps Performed
* Tests pass ✅
Fixed various small issues:
* Made TabView bottom border span the entire window width
* Made ScrollBar inner thumb rounded again
* Made SplitButton look more like the new add tab button
* Adjusted rename box height (24px, like the official compact sizing height)
* Adjusted caption button colors to match Windows 11
* ColorPicker can now escape window bounds
* Tweaked ColorPicker buttons
Further builds on #12799. #12799 assumes that the connection is prepared to receive FocusIn/FocusOut events as input. For ConPTY we can be relatively sure of that, but that's not _technically_ correct. In the hypothetical world where the connection is not a ConPTY connection, then the other side might not be expecting those sequences.
This remedies the issue by
* ConPTY will always request focus event mode (from the terminal) when it starts up
* when a client tries to disable focus events in conpty, conpty is gonna note that internally, but never transmit that to the hosting terminal, to leave the terminal in focus event mode.
* `TerminalDispatch` and `ControlCore` are hooked up now to only send focus events when the Terminal is in focus event mode (which will be always for conpty)
* At this point, it was like, 4LOC in `terminalInput.cpp` to add support for focus events to conhost as well.
## checklist
* [x] closes#11682
* This combined with #12515 will finally close out #2988 as well, but we can do that manually.
* [x] I work here
* [ ] There aren't tests for this. There probably should be.
This commit replaces our use of `size_t` to represent VT parameters with
`int32_t`. While unsigned integers have the inherent benefit of being less
ambiguous and enjoying two's complement, our buffer coordinates use signed
integers. Since a number of VT functions need to convert their parameters
to coordinates, this commit makes the conversion easier.
The benefit of this change becomes even more apparent if one considers
that a number of places performed unsafe conversions
of their size_t parameters to int or short already.
Files that had to be modified were converted to use til
wrappers instead of COORD or SMALL_RECT wherever possible.
## References
This commit contains about 20% of the work for #4015.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
I'm mostly relying on our unit tests here. Both OpenConsole and WT appear to work fine.
#### ⚠️ _Targets #12799_ ⚠️
This is an atomic bit of code that partners with #12799. It's separated as an individual PR to keep diffs more simple.
This ensures that when a terminal tells ConPTY that it's focused, that ConPTY doesn't do the `ConsoleControl(CONSOLE_FOREGROUND` thing unless the terminal application is actually in the foreground. This prevents a trivial exploit whereby a `malicious.exe` could create a PTY, tell ConPTY it has focus (when it doesn't), then use this mechanism to launch an instance of itself into the foreground.
When the terminal tells us it's in the foreground, we're gonna look at the owner of the ConPTY window handle. If that owner has focus, then cool, this is allowed. Otherwise, we won't grant them the FG right. For this to work, the terminal just have already called `ReparentPseudoConsole`.
* built on top of #12799 and #12526
* [x] Part of #2988
* [x] Tested manually.
## Window shenanigans, part the third:
Hooks the Terminal's focus state up to the underlying ConPTY. This is LOAD BEARING for allowing windows created by console applications to bring themselves to the foreground.
We're using the [FocusIn/FocusOut](https://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h3-FocusIn_FocusOut) sequences to communicate to ConPTY when a control gains/loses focus. Theoretically, other terminals could do this as well.
## References
#11682 tracks _real_ support for this sequence in Console & conpty. When we do that, we should consider even if a client application disables this mode, the Terminal & conpty should always request this from the hosting terminal (and just ignore internally to ConPTY).
See also #12515, #12526, which are the other two parts of this effort. This was tested with all three merged together, and they worked beautifully for all our scenarios. They are kept separate for ease of review.
## PR Checklist
* [x] This is prototype 3 for #2988
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This allows windows spawned by console processes to bring themselves to the foreground _when the console is focused_. (Historically, this is also called in the WndProc, when focus changes).
Notably, before this, ConPTY was _never_ focused, so windows could never bring themselves to the foreground when run from a ConPTY console. We're not blanket granting the SetForeground right to all console apps when run in ConPTY. It's the responsibility of the hosting terminal emulator to always tell ConPTY when a particular instance is focused.
## Validation Steps Performed
(gif below)
This will result in the deletion of the following directories from the OS tree, under `onecore/windows/core/console/open`:
* doc/
* src/tools/MonarchPeasantPackage/
* src/api-ms-win-core-synch-l1-2-0/
* src/tools/ansi-color/
* src/tools/ColorTool/
We have gotten some PoliCheck flags on `doc/` (thanks to Niksa.md), but also the OS build just doesn't need these folders 😄
#12149 introduced a bug where `ClearCommandline()` is called on any user
profile containing the non-canonical strings "cmd.exe" or "powershell.exe"
in the "commandline" field. If you happen to have set the "commandline"
field in your `profiles.defaults`, this will cause these user profiles
to adopt the base layer command-line instead of the defaults layer one.
This commit fixes the issue, by checking the command-line after the call
to `ClearCommandline()` and ensuring it's the expected string.
Additionally this moves the migration logic to `SettingsLoader` as this allows
us to write the fixed settings to disk, if any fixed had to be applied.
## PR Checklist
* [x] Closes#12842
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* The modified unit test fails without these changes ✅
* The modified unit test succeeds with these changes ✅
* Setting `profiles.defaults.commandline` to "pwsh.exe" and setting
my "...\\powershell.exe" profile to use just "powershell.exe" as
the `commandline`, doesn't cause it to use "pwsh.exe" ✅
The fixed settings are written to settings.json ✅
This is exactly the same as #12855, save for one small difference:
```diff
diff --git a/build/pipelines/ci.yml b/build/pipelines/ci.yml
index e4e53e9b2..dc9040aeb 100644
--- a/build/pipelines/ci.yml
+++ b/build/pipelines/ci.yml
@@ -99,7 +99,6 @@ stages:
- stage: CodeIndexer
displayName: Github CodeNav Indexer
dependsOn: [Build_x64]
- condition: succeeded()
+ condition: and(succeeded(), not(eq(variables['Build.Reason'], 'PullRequest')))
jobs:
- template: ./templates/codenav-indexer.yml
- condition: not(eq(variables['Build.Reason'], 'PullRequest'))
```
Because the first ones failed with an error about a duplicate condition
And that hosed the whole CI
VTE only rewraps the contents of the (normal screen + its scrollback
buffer) on a resize event. It doesn't rewrap the contents of the
alternate screen. The alternate screen is used by applications which
repaint it after a resize event. So, it doesn't really matter. However,
in that short time window, after resizing the terminal but before the
application catches up, this prevents vertical lines
It was really hard to get a gif of this where it happened and was small
enough to upload to GH, but there is one in #12719.
There's something in this branch that fixes a scrolling issue in the
parent PR. I'm partially filing this so I can look at the diffs here and
try and figure out what that is. I kinda want to just take all 3 alt
buffer PRs as a single atomic unit, but splitting them up made sense
from a review standpoint.
Closes#3493
The original research for a solution all the way back in #11032 contained an
unfortunate flaw. The nearby font loading code was written under the assumption
that Cascadia is missing in the system font collection, leading to our issues.
Adding nearby fonts last into the collection would thus ensure that we use
the system fonts whenever possible, but only have nearby fonts as a fallback.
This didn't work and we figured that we'd have to always prefer loading nearby
fonts over system fonts. #12554 tried to achieve this, but failed to change
the order in which the font set is built. In order to prefer nearby fonts
over system ones, we have to add the system font collection last.
## PR Checklist
* [x] Closes#11648
* [x] I work here
* [x] Tests added/passed
* [x] Embarrassment for my incompetence
## Validation Steps Performed
* Put Jetbrains Mono into the AppX directory of the Debug build
* Jetbrains Mono shows up in the font selector and is useable
Additionally a more complex mini-test was built:
Using FontForge I've cloned arial.ttf and removed all characters except for
the letter "0". Afterwards I've build a custom font collection the same way
we do it in Terminal, extracted a `FontFace` named "Arial" and called
`IDWriteFont::HasCharacter` for the letter "1".
Loading the system font collection first results in `TRUE` and loading it last
results in `FALSE` (since my custom arial.ttf doesn't have the letter "1").
This confirms that we need to load the system font collection last.
We discussed this with the GitHub folks. It's pretty cool.
(Rich code nav) brings editor-level navigation capabilities into
GitHub.com for C++ and C# repos
If you want to try it out, you can go to github.dev for this repo.
If you haven't used github.dev before there are two steps to get setup:
1. In the settings file you'll need to enable Rich Code Nav. If you just
search for "rich", there'll be a checkbox to enable it.
2. Refresh the page and you should see a stacked papers icon in the task
bar at the bottom. Click on that and select "Latest Index". Then one
more refresh and you should be good to go with navigation in both C#
and C++ files!
This is an attempt to simplify the `ConGetSet` interface down to the
smallest set of methods necessary to support the `AdaptDispatch` class.
The idea is that it should then be easier to implement that interface in
Windows Terminal, so we can replace the `TerminalDispatch` class with
`AdaptDispatch`.
This is a continuation of the refactoring started in #12247, and a
significant step towards #3849.
## Detailed Description of the Pull Request / Additional comments
The general idea was to give the `AdaptDispatch` class direct access to
the high-level structures on which it needs to operate. Some of these
structures are now passed in when the class is constructed (the
`Renderer`, `RenderSettings`, and `TerminalInput`), and some are exposed
as new methods in `ConGetSet` (`GetStateMachine`, `GetTextBuffer`, and
`GetViewport`).
Many of the existing `ConhostInternalGetSet` methods could easily then
be reimplemented in `AdaptDispatch`, since they were often simply
forwarding to methods in one of the above structures. Some were a little
more complicated, though, and require further explanation.
* `GetConsoleScreenBufferInfoEx`: What we were typically using this for
was to obtain the viewport, although what we really wanted was the
virtual viewport, which is now accessible via the `GetViewport`
method. This was also used to obtain the cursor position and buffer
width, which we can now get via the `GetTextBuffer` method.
* `SetConsoleScreenBufferInfoEx`: This was only really used for the
`AdaptDispatch::SetColumns` implementation (for `DECCOLM` mode), and
that could be replaced with `ResizeWindow`. This is a slight change in
behaviour (it sizes the window rather than the buffer), but neither is
technically correct for `DECCOLM`, so I think it's good enough for
now, and at least it's consistent with the other VT sizing operations.
* `SetCursorPosition`: This could mostly be replaced with direct
manipulation of the `Cursor` object (accessible via the text buffer),
although again this is a slight change in behavior. The original code
would also have made a call to `ConsoleImeResizeCompStrView` (which I
don't think is applicable to VT movement), and would potentially have
moved the viewport (not essential for now, but could later be
supported by `DECHCCM`). It also called `VtIo::SetCursorPosition` to
handle cursor inheritance, but that should only apply to
`InteractDispatch`, so I've moved that to the
`InteractDispatch::MoveCursor` method.
* `ScrollRegion`: This has been replaced by two simple helper methods in
`AdaptDispatch` which better meet the VT requirements -
`_ScrollRectVertically` and `_ScrollRectHorizontally`. Unlike the
original `ScrollRegion` implementation, these don't generate
`EVENT_CONSOLE_UPDATE_SCROLL` events (see #12656 for more details).
* `FillRegion`: This has been replaced by the `_FillRect` helper method
in `AdaptDispatch`. It differs from the original `FillRegion` in that
it takes a rect rather than a start position and length, which gives
us more flexibility for future operations.
* `ReverseLineFeed`: This has been replaced with a somewhat refactored
reimplementation in `AdaptDispatch`, mostly using the
`_ScrollRectVertically` helper described above.
* `EraseAll`: This was previously handled by
`SCREEN_INFORMATION::VtEraseAll`, but has now been entirely
reimplemented in the `AdaptDispatch::_EraseAll` method.
* `DeleteLines`/`InsertLines`/`_modifyLines`: These have been replaced
by the `_InsertDeleteLineHelper` method in `AdaptDispatch`, which
mostly relies on the `_ScrollRectVertically` helper described above.
Finally there were a few methods that weren't actually needed in the
`ConGetSet` interface:
* `MoveToBottom`: This was really just a hack to get the virtual
viewport from `GetConsoleScreenBufferInfoEx`. We may still want
something like in the future (e.g. to support `DECVCCM` or #8879), but
I don't think it's essential for now.
* `SuppressResizeRepaint`: This was only needed in `InteractDispatch`
and `PtySignalInputThread`, and they could easily access the `VtIo`
object to implement it themselves.
* `ClearBuffer`: This was only used in `PtySignalInputThread`, and that
could easily access the buffer directly via the global console
information.
* `WriteControlInput`: This was only used in `InteractDispatch`, and
that could easily be replaced with a direct call to
`HandleGenericKeyEvent`.
As part of these changes, I've also refactored some of the existing
`AdaptDispatch` code:
* `_InsertDeleteHelper` (renamed `_InsertDeleteCharacterHelper`) is now
just a straightforward call to the new `_ScrollRectHorizontally`
helper.
* `EraseInDisplay` and `EraseInLine` have been implemented as a series
of `_FillRect` calls, so `_EraseSingleLineHelper` is no longer
required.
* `_EraseScrollback` is a essentially a special form of scrolling
operation, which mostly depends on the `TextBuffer::ScrollRows`
method, and with the filling now provided by the new `_FillRect`
helper.
* There are quite a few operations now in `AdaptDispatch` that are
affected by the scrolling margins, so I've pulled out the common
margin setup into a new `_GetVerticalMargins` helper method. This also
fixes some edge cases where margins could end up out of range.
## Validation Steps Performed
There were a number of unit tests that needed to be updated to work
around functions that have now been removed, but these substitutions
were fairly straightforward for the most part.
The adapter tests were a different story, though. In that case we were
explicitly testing how operations were passed through to the `ConGetSet`
interface, but with more than half those methods now gone, a significant
rewrite was required.
I've tried to retain the crux of the original tests, but we now have to
validate the state changes on the underlying data structures, where
before that state would have been tracked in the `TestGetSet` mock. And
in some cases we were testing what happened when a method failed, but
since that scenario is no longer possible, I've simply removed those
tests.
I've also tried to manually test all the affected operations to confirm
that they're still working as expected, both in vttest as well as my own
test scripts.
Closes#12662
"Alternate scroll mode" is a neat little mode where the app wants mouse wheel events to come through as arrow keypresses instead, when in the alternate buffer. Now that we've got support for the alt buffer in the Terminal, we can support this as well.
* [x] Closes https://github.com/microsoft/terminal/issues/3321
* [x] I work here
* [ ] Tests would be nice
Tested manually with
```bash
printf "\e[?1007h" ; man ps
```
## Window shenanigans, part the first:
This PR enables terminals to tell ConPTY what the owning window for the
pseudo window should be. This allows thigs like MessageBoxes created by
console applications to work. It also enables console apps to use
`GetAncestor(GetConsoleWindow(), GA_ROOT)` to get directly at the HWND
of the Terminal (but _don't please_).
This is tested with our internal partners and seems to work for their
scenario.
See #2988, #12799, #12515, #12570.
## PR Checklist
This is 1/3 of #2988.
This PR allows the Terminal to actually use the alt buffer
appropriately. Currently, we just render the alt buffer state into the
main buffer and that is wild. It means things like `vim` will let the
user scroll up to see the previous history (which it shouldn't).
Very first thing this PR does: updates the
`{Trigger|Invalidate}Circling` methods to instead be
`{Trigger|Invalidate}Flush(bool circling)`. We need this so that when an
app requests the alt buffer in conpty, we can immediately flush the
frame before asking the Terminal side to switch to the other buffer. The
`Circling` methods was a great place to do this, but we don't actually
want to set the circled flag in VtRenderer when that happens just for a
flush.
The Terminal's implementation is a little different than conhost's.
Conhost's implementation grew organically, so I had it straight up
create an entire new screen buffer for the alt buffer. The Terminal
doesn't need all that! All we need to do is have a separate `TextBuffer`
for the alt buffer contents. This makes other parts easier as well - we
don't really need to do anything with the `_mutableViewport` in the alt
buffer, because it's always in the same place. So, we can just leave it
alone and when we come back to the main buffer, there it is. Helper
methods have been updated to account for this.
* [x] Closes#381
* [x] Closes#3492
* #3686, #3082, #3321, #3493 are all good follow-ups here.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Specs for feature request "Theme-controlled color scheme switch".
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4066
This is all of course, conjecture. This crash is totally wild and makes no sense at all. But, we're hoping that this fixes it. This should also make calls to the Monarch a little easier.
You may be asking yourself - why aren't I doing this for the Peasant too? Well, because the Peasant simply doesn't crash like the monarch does. I'm not gonna touch something that's not broken _during ask mode_.
References #12774. We can close the bug if it is verified fixed.
855e136 contains a regression which breaks buffer reflow if wide surrogate
characters are present. This happens because we made use of the
`TextBufferCellIterator` whose increment operator skips 2 cells for wide
characters. This created a "misalignment" in the reflow logic which was written
for cell-wise iteration. This commit fixes the issue, by reverting back to the
previous algorithm without iterators.
Closes#12837
Closes MSFT-38904421
## Validation Steps Performed
* Run ``pwsh -noprofile -command echo "`u{D83D}`u{DE43}"``
* Resizing conhost preserves all contents ✅
* Resizing Windows Terminal doesn't crash it ✅
* Added a test covering this issue ✅
If we delete a scheme, and the next scheme we've loaded is an inbox one
that _can't_ be deleted, then we need to toss focus to something
sensible, rather than letting it fall out to the tab item.
When deleting a scheme and the next scheme _is_ deletable, this isn't an
issue, we'll already correctly focus the Delete button.
125e9c4790 focused the SelectionBackground
button, which is the _previous_ focusable control, rather than the
following one.
However, it seems even more useful for focus to ALWAYS land on the
scheme dropdown box. This forces Narrator to read the name of the newly
selected color scheme, which seemed more useful.
I'm waiting on feedback from a11y team to see if this solution is
acceptable.
* [x] Is for #11971
After switching to ControlsV2, it seems that
delay-loading a dialog causes the ContentDialog to be assigned a
Height equal to it's content size. If we DON'T assign the
ContentDialog a Row, I believe it's assigned Row 0 by default. So,
when the dialog gets opened, the dialog seemingly causes a giant
hole to appear in the body of the app.
Assigning all the dialogs to Row 2 (where the rest of the content
is) makes the "hole" appear in the same space as the rest of the
TabContent, fixing the issue.
Note that the actual content in a content dialog gets parented to
the PopupRoot, so it actually always appeared in the correct place, it's
just this weird hole that appeared in Row 0.
* [x] Closes#12775
* See also:
* #12202 was fixed by #12208
* #12447 was fixed by #12517
* [x] Tested manually
* [x] Reverts #12625
* [x] Reverts #12517
You'd think that if a key wasn't present in a ThemeDictionary, it'd fall back to the original value. You'd be wrong - if you provide a Light&dark version of a resource, but not the HighContrast version, the resource loader will fall back to the _Light_ value. Of course.
Before (left top), after (right bottom)
Closes MSFT:38264744
This is like, 2-4% of our crashes. Impossible to say for sure, but this _looks_ like it's the root cause. This is just another one of our `HandleCommandlineArgs` buckets, hopefully the last.
* [x] Hopefully should close out MSFT:38542548
* [ ] No I didn't write tests, impossible to test
* [x] it builds
Replaces all the `RadioButton` expanders with `ComboBox`es, which can have the options inline, as opposed to in the expander content. For example, here's a single commit with the changes for a single one of these settings: 745c77d03e
### Checklist
* [x] Closes#12648
* [x] Actually closes#9566 as well (by just removing all radio buttons)
* [x] I work here
* [x] Tested manually
* [x] I'd love @carlos-zamora to have an a11y pass at this, just to see if it's egregious or not.
### Before, after:
This commit fixes some formatting bugs by upgrading clang-format and ensures
that our code is again formatted the same way Visual Studio 2022 would do it.
This is a crazy idea Dustin and I had.
> we can't repro this at will. But we kinda have an idea of where the deref is. We don't know if the small patch (throw, and try again) will fix it. We're sure that the "just fall back to an isolated monarch" will work. I'd almost rather take a build testing the small patch first, to see if that works
> This might seem crazy
> in 1.12, isolated monarch. In 1.13, "small patch". In 1.14, we can wait and see
I can write more details in the morning. It's 5pm here so if we want this today, here it is.
@dhowett double check my velocity flag logic here. Should be always true for Release, and off for Dev, Preview.
* [x] closes#12774
On certain builds of Windows, when Terminal is set as the default it
will accumulate an unbounded amount of queued animations while the
screen is off and it is servicing window management for console
applications.
This results in Terminal hanging when left overnight, as it has millions
of animations to process.
The new call into TerminalThemeHelpers will tell our compositor to
automatically complete animations that are scheduled while the screen is
off.
Fixes MSFT-38506980
Before #12691, the msixbundle version was of the format YYYY.MM.DD.0.
After #12691, it became the same as the build of Terminal it contained.
This caused some trouble for _some_ systems: major version 1 is much,
much smaller than 2022.
Adding 3000 to the major version component, _only for the bundle_, gets
around this. Ugh.
Fixes#12816.
Adds the common nuget import to the Fuzz project so that it compiles.
## References
Broken in #12778, Issue identified by #12796
## Validation Steps Performed
`Host.FuzzWrapper` project builds.
## Summary of the Pull Request
Prevents the Fuzz pipeline from failing by refactoring the nuget restore pipeline steps.
## References
Broken in #12778.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
Does what it says on the tin. This is maximal BODGE.
`TeachingTip` doesn't provide an `Opened` event.
(https://github.com/microsoft/microsoft-ui-xaml/issues/1607). But we
want to focus the renamer text box when it's opened. We can't do that
immediately, the TextBox technically isn't in the visual tree yet. We
have to wait for it to get added some time after we call IsOpen. How do
we do that reliably? Usually, for this kind of thing, we'd just use a
one-off LayoutUpdated event, as a notification that the TextBox was
added to the tree. HOWEVER:
* The _first_ time this is fired, when the box is _first_ opened,
yeeting focus doesn't work on the first LayoutUpdated. It does work on
the second LayoutUpdated. Okay, so we'll wait for two LayoutUpdated
events, and focus on the second.
* On subsequent opens: We only ever get a single LayoutUpdated. Period.
But, you can successfully focus it on that LayoutUpdated.
So, we'll keep track of how many LayoutUpdated's we've _ever_ gotten. If
we've had at least 2, then we can focus the text box.
We're also not using a ContentDialog for this, because in Xaml Islands a
text box in a ContentDialog won't receive _any_ keypresses. Fun!
## References
* microsoft/microsoft-ui-xaml#1607
* microsoft/microsoft-ui-xaml#6910
* microsoft/microsoft-ui-xaml#3257
* microsoft/terminal#9662
## PR Checklist
* [x] Will close out #12021, but that's an a11y bug that needs secondary
validation
* [x] Closes#11322
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested manually
Make a VTApiRoutines servicer that does minimal translations instead of
environmental simulation for some output methods. Remaining methods are
backed on the existing console host infrastructure (primarily input
related methods).
## PR Checklist
* [x] I work here
* [x] It's Fix-Hack-Learn quality so it's behind a feature gate so we
can keep refining it. But it's a start!
To turn this on, you will have to be in the Dev or Preview rings
(feature staged). Then add `experimental.connection.passthroughMode:
true` to a profile and on the next launch, the flags will propagate down
through the `ConptyConnection` into the underlying `Openconsole.exe`
startup and tell it to use the passthrough mode instead of the full
simulation mode.
## Validation Steps Performed
- Played with it manually in CMD.exe, it seems to work mostly.
- Played with it manually in Ubuntu WSL, it seems to work.
- Played with it manually in Powershell and it's mostly sad. It'll get
there.
Starts #1173
This script takes pull requests from a project board, cherry-picks them,
and updates the project board. It also yells at you if there are
conflicts to resolve, and generally tries to keep track of everything.
It is quite cool.
If we do not include mp:PhoneIdentity in our AppxManifest, the store
will edit our package and re-sign it for distribution. When that
happens, it creates a divergence: there are now two versions of our
package with the same name and version number, but different contents.
This breaks everything.
**THIS IS LOAD BEARING**
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This builds on top of #12707. As I understand it the primary motivation for using a git submodule instead of NuGet is just that it is too annoying to have to manage dozens of packages.config files and their corresponding import statements. Now that there is a single global nuget definition that is a nonissue and we can switch over.
This also updates to the latest version of WIL.
Now that the latest version of WIL is available it uses it to replace `winrt::resume_foreground` with `wil::resume_foreground`. See [492c01bb53) for a detailed explanation of the problems with `winrt::resume_foreground` and how WIL addresses them.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#12776, Closes#12777
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Ran `git clean -fdx` to wipe my clone to be completely clean. Opened the solution in Visual Studio 2022 and build it. Used `razzle.cmd`, `b`, and `runut.cmd` to run the tests.
These changes are purely a refactoring of the build files. There should
be no difference to the compiled result or runtime behavior.
Currently there are packages.config files in lots of directories, with
those same projects referencing props/targets from packages/ with a
version string in the path. This is frustrating because version changes
or new dependencies require updating lots and lots of build files
identically. There is also the possibility of error where locations are
missed.
With these changes there is a single canonical nuget configuration that
takes effect for all of OpenConsole.sln. Updating version numbers
should be limited to a single set of global files.
The changes were done incrementally but the result is basically that
dep\nuget\packages.config serves as the global NuGet dependency list. A
pair of common build files (common.nugetversions.props and
common.nugetversions.targets) were added to contain the various imports
and error checks. There is also a special build target to ensure that
the restore happens before builds even though a given directory doesn't
have a packages.config for Visual Studio to observe.
These new *.nugetversions.* files are imported in pretty much every
vcxproj/csproj in the solution in the appropriate place to satisfy the
need for packages. There are opt-in configuration values (e.g.
`TerminalCppWinrt=true`) that must be set to opt into a given
dependency. Adding a new dependency is just a matter of adding a new
opt-in value. The ordering of include does matter, which was a
difficult challenge to realize and address.
There was also a preexisting issue in 3 test projects where
cppwinrt.props was included but not cppwinrt.targets. By consolidating
things globally that "error" was fixed, but broke the build in a way
that was very confusing. Those projects don't need the cppwinrt targets
so they were opted out of the cppwinrt build files entirely to fix the
breaks and get back to previous behavior.
There are two notable exceptions to this canonical versioning. The
first is that there are dueling XAML 2.7 dependencies. I avoided that
by leaving those as per-project package.config entries. The second is
that any projects outside of the .sln (such as the Island samples) were
not touched.
## Validation Steps Performed
The primary validation is that the solution builds without errors. That
is what I'm seeing (x64|Debug). I also ran `git clean -fdx` from the
root of the repo to wipe it to clean and then opened the solution and
was able to build successfully. The project F5 deploys and looks fine
to me with just a cursory glance. The tests also largely pass (7418
pass, 188 fail, 14 other) which is as good or better than the baseline I
established from a clean clone.
Closes#12708
In two instances, the help text for the settings UI refers to _transparency_ when we're really talking about _opacity._ This PR changes those occurences to more accurately reflect the setting being described.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#12592
Previously we would only call `SetWindowSize` and `TriggerRedrawAll` if the
viewport size in characters changed. This commit removes the limitation.
Since the if-condition limiting full redraws is now gone, this commit
moves the responsibility of limiting the calls up the call chain.
With `_refreshSizeUnderLock` now being a heavier function call
than before, some surrounding code was thus refactored.
## PR Checklist
* [x] Closes#11317
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
Test relevant for #11317:
* Print text, filling the entire window
* Move the window from a 150% scale to a 300% scale monitor
* The application works as expected ✅
Regression tests:
* Text zoom with Ctrl+Plus/Minus/0 works as before ✅
* Resizing a window works as before ✅
* No deadlocks, etc. during settings updates ✅
Changed the default value of `"trimBlockSelection"` to `true`.
* [x] Closes#12536
## Validation Steps Performed
Without editing the setting, the toggle switch was enabled by default in the settings UI.
Since RS1 (CL 3427806), gdi32 has been available on OneCoreUAP-based
editions of Windows. Therefore, we no longer need the indirect call to
TranslateCharsetInfo and without that, IInputServices doesn't have a
reason to exist.
In an ideal world.
Unfortunately, we actually do use IInputServices as a backhanded way to
get at the ConIoSrvComm from other OneCoreInteractivity components...
we also use it in a trick we play in RundownAndExit to make sure that
the ConIoSrv connection tears down at the right time.
I've replaced that trick with an equally dirty trick, but one that is
*very explicit* about what it's doing.
This change would break CJK+Grid Lines and GetConsoleLangID on
OneCore-based editions that do not host the extension apiset
ext-ms-win-gdi-font-l1... so we're falling back to the old ConIoSrvComm
implementation directly in `dbcs.cpp`.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 74ca635710701c45cda9eefd13dafc6f180feb49
Related work items: MSFT-38632962
5964060 contains a regression were the grayscale blending algorithm used the
gamma corrected foreground color as the pixel color, instead of blending that
color with the background color first. Due to that the background color
got lost / got set to black. This breaks any dark-on-bright outputs.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
All 3 "antialiasing" settings work just like in DxEngine. ✅
## Summary of the Pull Request
Fixes a bug in ConHost where Narrator wouldn't read the deleted letter after the user pressed backspace.
## References
MSFT:31748387
## Detailed Description of the Pull Request / Additional comments
`WriteCharsLegacy()` already calls `NotifyAccessibilityEventing()` when text is inserted into the buffer ([see code](855e1360c0/src/host/_stream.cpp (L559-L563))). However, when backspace is pressed, the entire if-condition is skipped over, resulting in the accessibility event not being fired. `WriteCharsLegacy()` has a separate branch that is dedicated to handling backspace, so I added a call to the relevant logic to notify UIA at the end of that.
## Validation Steps Performed
✅ <kbd>Backspace</kbd> deletes a character and Narrator reads it
✅ <kbd>Backspace</kbd> still works with NVDA and JAWS (unchanged behavior)
✅ if the input buffer had wrapped text, the above scenario works as expected
✅ scenario works for CMD, PowerShell Core, and WSL
PR #12722 introduced a dependency on usp10.dll. The Script* APIs are split
between gdi32 and usp10, so we needed to add a new entry to the sources
files for anybody who consumed the GDI renderer.
## Summary of the Pull Request
Fixes a bug in ConHost where Narrator wouldn't read the deleted letter after the user pressed backspace.
## References
MSFT:31748387
## Detailed Description of the Pull Request / Additional comments
`WriteCharsLegacy()` already calls `NotifyAccessibilityEventing()` when text is inserted into the buffer ([see code](855e1360c0/src/host/_stream.cpp (L559-L563))). However, when backspace is pressed, the entire if-condition is skipped over, resulting in the accessibility event not being fired. `WriteCharsLegacy()` has a separate branch that is dedicated to handling backspace, so I added a call to the relevant logic to notify UIA at the end of that.
## Validation Steps Performed
✅ <kbd>Backspace</kbd> deletes a character and Narrator reads it
✅ <kbd>Backspace</kbd> still works with NVDA and JAWS (unchanged behavior)
✅ if the input buffer had wrapped text, the above scenario works as expected
✅ scenario works for CMD, PowerShell Core, and WSL
Some applications like `vim -H` implement their own BiDi reordering.
Previously we used `PolyTextOutW` which supported such arrangements,
but with a0527a1 and the switch to `ExtTextOutW` we broke such applications.
This commit restores the old behavior by reimplementing the basics
of `ExtTextOutW`'s internal workings while enforcing LTR ordering.
## Validation Steps Performed
* Create a text file with "ץחסק פחופפסנ חס קוח ז׳חסש ץקקטק פחטסץ"
Viewing the text file with `vim -H` presents the contents as expected ✅
* Printing enwik8 is as fast as before ✅
* Font fallback for various eastern scripts in enwik8 works as expected ✅
* `DECDWL` double-width sequences ✅
* Horizontal scrolling (apart from producing expected artifacts) ✅Closes#12294
(cherry picked from commit d97d9f0fcf)
The legacy console used to use case-sensitive history deduplication and
this change reverts the logic to restore ye olde history functionality.
This commit additionally changes the other remaining `std::equal` plus
`std::towlower` check into a `CompareStringOrdinal` call,
just because that's what MSDN suggests to use in such situations.
## PR Checklist
* [x] Closes#4186
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Enter `test /v`
* Enter `test /V`
* Browsing through the history yields both items ✅
(cherry picked from commit 6bc2b4af09)
`WideCharToMultiByte` doesn't write a final null-byte by default.
`til::u16u8` avoids the problem.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Test passes in Debug builds ✅
(cherry picked from commit 5072ee640f)
This removes one source of potential integer overflows from the Viewport class.
Other parts were left untouched, as this entire class of overflow issues gets
fixed all at once, as soon as we replace COORD with til::coord (etc.).
## PR Checklist
* [x] Closes#5271
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Call `ScrollConsoleScreenBufferW` with out of bounds coordinates
* Doesn't crash ✅
(cherry picked from commit a4a6dfcc8d)
As noted in #6759:
> `RtlCreateUnicodeString` creates a copy of the string on the process heap and the `PortName` variable has local-scope. The string doesn't get freed with `RtlFreeUnicodeString` before the function returns creating a memory leak.
> `CIS_ALPC_PORT_NAME` is a constant string and the `PortName` variable should instead be initialized using the `RTL_CONSTANT_STRING` macro:
>
> ```c++
> static UNICODE_STRING PortName = RTL_CONSTANT_STRING(CIS_ALPC_PORT_NAME);
> ```
I actually built this in the OS repo to make sure it'll still build, because this code doesn't even build outside Windows.
* [x] Closes#6759
* I work here.
(cherry picked from commit 349b76795f)
This adds some validation in the `UiaTextRange` ctor for the cursor position.
#8730 was caused by creating a `UiaTextRange` at the cursor position when it was in a delayed state (meaning it's purposefully hanging off of the right edge of the buffer). Normally, `Cursor` maintains a flag to keep track of when that occurs, but Windows Terminal isn't maintaining that properly in `Terminal::WriteBuffer`.
The _correct_ approach would be to fix `WriteBuffer` then leverage that flag for validation in `UiaTextRange`. However, messing with `WriteBuffer` is a little too risky for our comfort right now. So we'll do the second half of that by checking if the cursor position is valid. Since the cursor is really only expected to be out of bounds when it's in that delayed state, we get the same result (just maybe a tad slower than simply checking a flag).
Closes#8730
Filed #12440 to track changes in `Terminal::_WriteBuffer` for delayed EOL wrap.
## Validation Steps Performed
While using magnifier, input/delete wrapped text in input buffer.
(cherry picked from commit 5dcf5262b4)
This commit fixes an issue, where we failed to emit a DECTCEM sequence to hide
the cursor if it was hidden before XtermEngine's first frame was finalized.
Even in such cases we need to emit a DECTCEM sequence
in order to ensure we're in a consistent state.
## Validation Steps Performed
* Added test✅
* Run #12401's repro steps around 30 times✅Closes#12401
(cherry picked from commit dbb70778d4)
The pull request fixes the issue where "sizeof" parameter was use instead of "ARRAYSIZE".
## PR Checklist
* [x] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
This was a pretty straight forward issue, i just replace sizeof which gives the byte size with ARRAYSIZE which give the number of elements in the array.
(cherry picked from commit 5fa1ba8dab)
In !1806141, MapVirtualKey and VkKeyScan became part of OneCore (yeah,
in 2018!). GetKeyState I can't quite figure out... but it looks like
the places we would use it (Win32 Window and Selection) already either
don't exist (window) or don't work (selection) in OneCore conhost.
Removing these redirects reduces our maintenance burden quite a bit.
Because we had to run all keyboard code through the service locator,
anything that had a dependency on key translation needed to link the
entire console host. Therefore, for anything that conhost depended upon,
so did the unit test binaries. Ugh.
I chose to keep TranslateCharsetInfo, even though it looks like gdi32 is
hosted in OneCore and the code appears as though it would work. It was
not in my critical path, and is a very basic local lookup that only powers
whether gridlines are available and the console's "Lang ID".
TEST RESULTS FROM ONECORE
Microsoft.Console.Host.FeatureTests.dll
Summary: Total=408, Passed=140, Failed=266, Blocked=0, Not Run=0, Skipped=2
I do not know how to make sure that the feature tests run properly on
OneCore. It looks like ModuleSetup is failing, which is unlikely to be
related to this change (especially given that conhost *does* launch.)
If I re-run the categories individually, they either pass or get marked
as skipped intentionally.
Microsoft.Console.Host.IntegrityTests.dll
Summary: Total=5, Passed=0, Failed=5, Blocked=0, Not Run=0, Skipped=0
Same.
Microsoft.Console.Interactivity.Win32.UnitTests.dll
Summary: Total=392, Passed=392, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.TextBuffer.UnitTests.dll
Summary: Total=27, Passed=27, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.Host.UIAutomationTests.dll
Summary: Total=6, Passed=0, Failed=0, Blocked=6, Not Run=0, Skipped=0
Microsoft.Console.Types.UnitTests.dll
Summary: Total=8, Passed=8, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Terminal.Til.UnitTests.dll
Summary: Total=290, Passed=290, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.VirtualTerminal.Parser.UnitTests.dll
Summary: Total=748, Passed=747, Failed=0, Blocked=0, Not Run=0, Skipped=1
Microsoft.Console.VirtualTerminal.Adapter.UnitTests.dll
Summary: Total=222, Passed=222, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.Host.UnitTests.dll
Summary: Total=5235, Passed=5222, Failed=0, Blocked=12, Not Run=0, Skipped=1
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev c4c0267e1139d8d205bc9995da7906e5b09f03db
Related work items: MSFT-38632962
Some applications like `vim -H` implement their own BiDi reordering.
Previously we used `PolyTextOutW` which supported such arrangements,
but with a0527a1 and the switch to `ExtTextOutW` we broke such applications.
This commit restores the old behavior by reimplementing the basics
of `ExtTextOutW`'s internal workings while enforcing LTR ordering.
## Validation Steps Performed
* Create a text file with "ץחסק פחופפסנ חס קוח ז׳חסש ץקקטק פחטסץ"
Viewing the text file with `vim -H` presents the contents as expected ✅
* Printing enwik8 is as fast as before ✅
* Font fallback for various eastern scripts in enwik8 works as expected ✅
* `DECDWL` double-width sequences ✅
* Horizontal scrolling (apart from producing expected artifacts) ✅Closes#12294
[Git2Git] Merged PR 7088552: Silence TVS by using %d (int) instead of %td (ptrdiff_t)
Silence TVS by using %d (int) instead of %td (ptrdiff_t)
This commit also includes an automatic sources.dep fix.
Fixes MSFT-38106841
Fixes MSFT-38106866
Related work items: #38106841, #38106866 Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 5983633fe90cccdb1165ab28935bd704414bb6f2
Related work items: #38106841, #38106866
## THE WHITE WHALE
This is a fairly naive fix for this bug. It's not terribly performant,
but neither is resize in the first place.
When the buffer gets resized, typically we only copy the text up to the
`MeasureRight` point, the last printable char in the row. Then we'd just
use the last char's attributes to fill the remainder of the row.
Instead, this PR changes how reflow behaves when it gets to the end of
the row. After we finish copying text, then manually walk through the
attributes at the end of the row, and copy them over. This ensures that
cells that just have a colored space in them get copied into the new
buffer as well, and we don't just blat the last character's attributes
into the rest of the row. We'll do a similar thing once we get to the
last printable char in the buffer, copying the remaining attributes.
This could DEFINITELY be more performant. I think this current
implementation walks the attrs _on every cell_, then appends the new
attrs to the new ATTR_ROW. That could be optimized by just using the
actual iterator. The copy after the last printable char bit is also
especially bad in this regard. That could likely be a blind copy - I
just wanted to get this into the world.
Finally, we now copy the final attributes to the correct buffer: the new
one. We used to copy them to the _old_ buffer, which we were about to
destroy.
## Validation
I'll add more gifs in the morning, not enough time to finish spinning a
release Terminal build with this tonight.
Closes#32🎉🎉🎉🎉🎉🎉🎉🎉🎉Closes#12567
The x86 Conhost UTs were failing because--when run in a specific order
(SearchTests, then SelectionInputTests)--PrepareGlobalScreenBuffer would
attempt to enable painting on a renderer that was dead and gone and
pushing up daisies.
The legacy console used to use case-sensitive history deduplication and
this change reverts the logic to restore ye olde history functionality.
This commit additionally changes the other remaining `std::equal` plus
`std::towlower` check into a `CompareStringOrdinal` call,
just because that's what MSDN suggests to use in such situations.
## PR Checklist
* [x] Closes#4186
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Enter `test /v`
* Enter `test /V`
* Browsing through the history yields both items ✅
HLSL uses 32-bit booleans, while C++ uses 8-bit ones aligned by 32-bit.
This meant that the shader was accessing uninitialized memory
forcing ClearType blending to be randomly enabled.
This regressed in commit 5964060.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* ClearType blending works ✅
* Enabling transparent backgrounds forces grayscale blending ✅
`WideCharToMultiByte` doesn't write a final null-byte by default.
`til::u16u8` avoids the problem.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Test passes in Debug builds ✅
`std::basic_string_view::substr` throws an exception if the first argument
(offset) is out of range. If UIA is running, this creates _a lot_ of exceptions
and associated log output. This trivial change takes care of that.
After this commit we only set the default fields of a profile - primarily the
name field - as late as possible, after layering has already completed.
This ensures that we pick up any modifications from fragments.
## PR Checklist
* [x] Closes#12520
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Add a fragment at
`%LocalAppData%\Microsoft\Windows Terminal\Fragments\Fragment\fragment.json`
with
`{"profiles":[{"updates":"{61c54bbd-c2c6-5271-96e7-009a87ff44bf}","name":"NewName"}]}`
* Windows PowerShell profile is created with the name "NewName" in settings.json ✅
* Drop engine support for DirectX 9.1
Practically no one has such old hardware anymore and AtlasEngine additionally
drops support for 10.0. The fallback also didn't work properly,
because the `FeatureLevels` array failed to include 9.2 and 9.3.
We'll simply fall back to WARP on all such devices.
* Optimize shaders during compilation
The two new flags increase shader performance sometimes significantly.
* Fix shader feature level flags
D3D feature level 10.0 only support 4.0 and 10.1 only 4.1 shaders.
## PR Checklist
* [x] Closes#12655
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Add `WindowsTerminal.exe` in `dxcpl.exe`
* Add a basic `experimental.pixelShaderPath`
* All forced feature levels between `9_1` and `11_1` render as expected ✅
## Summary of the Pull Request
The purpose of the `IRenderTarget` interface was to support the concept
of multiple buffers in conhost. When a text buffer needed to trigger a
redraw, the render target implementation would be responsible for
deciding whether to forward that redraw to the renderer, depending on
whether the buffer was active or not.
This PR instead introduces a flag in the `TextBuffer` class to track
whether it is active or not, and it can then simply check the flag to
decide whether it needs to trigger a redraw or not. That way it can work
with the `Renderer` directly, and we can avoid a bunch of virtual calls
for the various redraw methods.
## PR Checklist
* [x] Closes#12551
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12551
## Detailed Description of the Pull Request / Additional comments
Anywhere that had previously been getting an `IRenderTarget` from the
`TextBuffer` class in order to trigger a redraw, will now just call the
`TriggerRedraw` method on the `TextBuffer` class itself, since that will
handle the active check which used to be the responsibility of the
render target. All the redraw methods that were in `IRenderTarget` are
now exposed in `TextBuffer` instead.
For this to work, though, the `Renderer` needed to be available before
the `TextBuffer` could be constructed, which required a change in the
conhost initialization order. In the `ConsoleInitializeConnectInfo`
function, I had to move the `Renderer` initialization up so it could be
constructed before the call to `SetUpConsole` (which initializes the
buffer). Once both are ready, the `Renderer::EnablePainting` method is
called to start the render thread.
The other catch is that the renderer used to setup its initial viewport
in the constructor, but with the new initialization order, the viewport
size would not be known at that point. I've addressed that problem by
moving the viewport initialization into the `EnablePainting` method,
since that will only be called after the buffer is setup.
## Validation Steps Performed
The changes in architecture required a number of tweaks to the unit
tests. Some were using a dummy `IRenderTarget` implementation which now
needed to be replaced with a full `Renderer` (albeit with mostly null
parameters). In the case of the scroll test, a mock `IRenderTarget` was
used to track the scroll delta, which now had to be replaced with a mock
`RenderEngine` instead.
Some tests previously relied on having just a `TextBuffer` but without a
`Renderer`, and now they require both. And tests that were constructing
the `TextBuffer` and `Renderer` themselves had to be updated to use the
new initialization order, i.e. with the renderer constructed first.
Semantically, though, the tests still essentially work the same way as
they did before, and they all still pass.
## Summary of the Pull Request
Closes#12670
Visual Studio 2022 offered to upgrade .NET Framework from an unsupported 4.5 to a supported 4.8. I let it do its thing (and undid a number of whitespace-only changes that aren't necessary). The project still builds after this. The UIA tests fail to run but I think that is preexisting and will be filing a new issue momentarily.
## PR Checklist
* [x] Closes#12670
* [x] Tests added/passed
## Validation Steps Performed
The solution compiles in VS2022 (except for #12673).
The store did not like when I uploaded two Windows Terminal packages
built on the same date, because the appxbundle version defaulted to
YYYY.MMDD.something.
There was a risk that using *this* version number will fail because it is
thousands of numbers less than "2022". We'll have to see if the store
rolls it out properly. I cannot find any documentation on how the store
rolls out *bundle* versions (it is very aware of .appx versions...).
A local test with 1.14.72x (Preview) published via the store seems to
have worked.
This commit fixes a stray exception during settings loading,
caused by a failure to obtain the app's extension catalog.
## PR Checklist
* [x] Closes#12305
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
I'm unable to replicate the issue. ❌
However an error log was provided in #12305 with which
the function causing the exception could be determined.
This regressed recently in cfaa315.
Initially I tried to migrate TestHostApp to C++/WinRT, but due to the
unbearable compile times I've reverted it back to C++/CX (>20x difference).
Unfortunately I then forgot to fix the underlying issue before submitting a PR.
## PR Checklist
* [x] Closes#12673
* [x] I work here
* [x] Tests added/passed
Many articles I read while writing this engine claimed that GPUs can't
do branches like CPUs can. One common approach to branching in GPUs is
apparently to "mask" out results, a technique called branch predication.
The GPU will simply execute all instructions in your shader linearly,
but if a branch isn't taken, it'll ignore the computation results.
This is unfortunate for our shader, since most branches we have are
only very seldomly taken. The cursor for instance is only drawn
on a single cell and underlines are seldomly used.
But apparently modern GPUs (2010s and later?) are actually entirely
capable of branching, _if_ all lanes ("pixels") processed by a
wave (""GPU core"") take the same branch.
On both my Nvidia GPU (RTX 3080) and Intel iGPU (Intel HD Graphics 530)
this change has a positive impact on power draw. Most noticeably on the
latter this reduces power draw from 900mW down to 600mW at 60 FPS.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
It seems to work fine on Intel and Nvidia GPUs.
Unfortunately I don't have a AMD GPU to test this on, but I suspect it can't be worse.
## Summary of the Pull Request
This change makes Windows Terminal raise a `RaiseNotificationEvent()` ([docs](https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.automation.peers.automationpeer.raisenotificationevent?view=winrt-22000)) for new text output to the buffer.
This is intended to help Narrator identify what new output appears and reduce the workload of diffing the buffer when a `TextChanged` event occurs.
## Detailed Description of the Pull Request / Additional comments
The flow of the event occurs as follows:
- `Terminal::_WriteBuffer()`
- New text is output to the text buffer. Notify the renderer that we have new text (and what that text is).
- `Renderer::TriggerNewTextNotification()`
- Cycle through all the rendering engines and tell them to notify handle the new text output.
- None of the rendering engines _except_ `UiaEngine` has it implemented, so really we're just notifying UIA.
- `UiaEngine::NotifyNewText()`
- Concatenate any new output into a string.
- When we're done painting, tell the notification system to actually notify of new events occurring and clear any stored output text. That way, we're ready for the next renderer frame.
- `InteractivityAutomationPeer::NotifyNewOutput()` --> `TermControlAutomationPeer::NotifyNewOutput`
- NOTE: these are split because of the in-proc and out-of-proc separation of the buffer.
- Actually `RaiseNotificationEvent()` for the new text output.
Additionally, we had to handle the "local echo" problem: when a key is pressed, the character is said twice (once for the keyboard event, and again for the character being written to the buffer). To accomplish this, we did the following:
- `TermControl`:
- here, we already handle keyboard events, so I added a line saying "if we have an automation peer attached, record the keyboard event in the automation peer".
- `TermControlAutomationPeer`:
- just before the notification is dispatched, check if the string of recent keyboard events match the beginning of the string of new output. If that's the case, we can assume that the common prefix was the "local echo".
This is a fairly naive heuristic, but it's been working.
Closes the following ADO bugs:
- https://dev.azure.com/microsoft/OS/_workitems/edit/36506838
- (Probably) https://dev.azure.com/microsoft/OS/_workitems/edit/38011453
## Test cases
- [x] Base case: "echo hello"
- [x] Partial line change
- [x] Scrolling (should be unaffected)
- [x] Large output
- [x] "local echo": keyboard events read input character twice
This sure is bodgy, but it makes sense. Right now, when we delete a profile, we load in a totally new content for the new profile's settings. That one resets the scroll view and the focus, and now the "delete" button is obviously not focused.
Instead, this PR will manually re-focus the delete button of a profile page when the page is navigated to _because we deleted another profile_.
* [x] This will take care of #11971
This removes one source of potential integer overflows from the Viewport class.
Other parts were left untouched, as this entire class of overflow issues gets
fixed all at once, as soon as we replace COORD with til::coord (etc.).
## PR Checklist
* [x] Closes#5271
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Call `ScrollConsoleScreenBufferW` with out of bounds coordinates
* Doesn't crash ✅
This fixes a pair of inbox bugs, hopefully.
* MSFT:35731327
* There's a small window where a peasant is being created when a monarch is exiting. When that happens, the new peasant will try to tell itself (the new monarch) when the peasant was last activated, but because the window hasn't actually finished instantiating, the peasant doesn't yet have a LastActivatedArgs to tell the monarch about.
* MSFT:32518679 (ARM version) / MSFT:32279047 (AMD64 version)
* This one's tricky. Not totally sure this is the fix, bug assuming my hypothesis is correct, this should fix it. Regardless, this does fix a bug that was in the code.
* If the king dies right as another window is starting, right while the new window is starting to ProposeCommandline to the monarch, the monarch could die. If it does, the new window just explodes too. Not what you want.
Vaguely tested the second bug manually, by setting breakpoints in the monarch, starting a defterm, then exiting the monarch while the handoff was in process. That now creates a new window, so that's at least something. `RemotingTests::TestProposeCommandlineWithDeadMonarch` was the closest I could get to testing that.
The first bug only got an eye check. Not sure how to repro, but I figured yeet and hopefully we get it.
* [x] Closes#12624
The `bg != _r.backgroundColor` invalidation check wasn't symmetric with
us setting `_r.backgroundColor` to `bg | _api.backgroundOpaqueMixin`.
Due to this, when the `backgroundOpaqueMixin` changed,
we didn't always update the const buffer appropriately.
## PR Checklist
* [x] Closes#11773
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Enable window transparency (`backgroundOpaqueMixin == 0x00000000`)
* Maximize window (ensure we have gutters in the first place)
* Disable window transparency (`backgroundOpaqueMixin == 0xff000000`)
* Gutters are filled ✅
This commit enables `/std:c++20` for local development under VS17.
Our CIs will continue to use VS16 and C++17 for now in order to reduce
the likelihood of regressions during the current development cycle.
It's expected that we'll migrate to VS17 soon, as this
is what conhost is already being built with anyways.
## PR Checklist
* [x] Closes#12510
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Everything compiles under `/std:c++20` ✅
This regressed in 2b202ce6, which removed `ACTCTX_FLAG_RESOURCE_NAME_VALID`
during `CreateActCtxW` under the assumption that an executable only has
one manifest. conhost has two however and we need to pick the correct one.
On OpenConsole this causes the expected `ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET`.
Closes MSFT:38355907
(cherry picked from commit c820af46b7)
By replacing `IDWriteFontSetBuilder2::AddFontFile` with
`IDWriteFactory5::CreateFontFileReference` and
`IDWriteFontSetBuilder1::AddFontFile` we add nearby
font loading support for Windows 10, build 15021.
This commit also fixes font fallback for AtlasEngine,
which was crashing during testing.
Finally it fixes a bug in DxEngine, where we only created a "nearby" font
collection if we couldn't find the font in the system collection. This doesn't
fix the bug, if the font is locked or broken in the system collection.
This is related to #11648.
## PR Checklist
* [x] Closes#12420
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Build a Debug version of Windows Terminal
* Put Jetbrains Mono into the writeable AppX directory
* Jetbrains Mono is present in the settings UI ✅
* DxEngine works with Jetbrains Mono ✅
* AtlasEngine works with Jetbrains Mono ✅
This regressed in 2b202ce6, which removed `ACTCTX_FLAG_RESOURCE_NAME_VALID`
during `CreateActCtxW` under the assumption that an executable only has
one manifest. conhost has two however and we need to pick the correct one.
On OpenConsole this causes the expected `ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET`.
Closes MSFT:38355907
## Summary of the Pull Request
This makes it so that the settings.json backups are no longer created when the user saves their settings via the Settings UI.
Closes#11703
"Summon" was translated as a synonym for "citation" in Spanish instead
of treating it as a RPG-related word. "Show/Hide" will hopefully
allow an improved automatic translation in the future.
Closes#10691
2b202ce6 introduced a bug, where FreeProcessData was called without the console
lock being held. The previous code can be found in 40e3dea, on line 441-454.
## PR Checklist
* [x] Closes MSFT:21372705
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
None, as this fix is purely theoretic, but it matches the stack trace
and 40e3dea clearly wasn't correctly ported to strict C++ either.
## Summary of the Pull Request
Fixes RTF generation for text with Unicode characters.
## PR Checklist
* [x] Closes#12379
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Added some unit tests.
Ran the following in PowerShell and copied the emitted text into WordPad.
```pwsh
echo "This is some Ascii \ {}`nLow code units: á é í ó ú `u{2b81} `u{2b82}`nHigh code units: `u{a7b5} `u{a7b7}`nSurrogates: `u{1f366} `u{1f47e} `u{1f440}"
```
2b202ce6 introduced a bug, where FreeProcessData was called without the console
lock being held. The previous code can be found in 40e3dea, on line 441-454.
## PR Checklist
* [x] Closes MSFT:21372705
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
None, as this fix is purely theoretic, but it matches the stack trace
and 40e3dea clearly wasn't correctly ported to strict C++ either.
From MSFT:36797001. Okay so this is only .22% of our crashes, but every little bit helps, right?
Turns out this is also hitting in:
* MSFT:35726322
* MSFT:34662459
and together they're a fairly hot bug.
There's a large class of bugs where we might get a callback to one of our event handlers when we call `app.Close()` in the `AppHost` dtor. This PR adds manual revokers to these events, and makes sure to revoke them BEFORE nulling out the `_window`. That will prevent callbacks during the rest of the dtor, when the `_window` is null.
This is intended to be a PR triggered build that only runs when
features.xml has been touched, to validate that the disabled features do
not cause compilation errors.
Four (4) squashed changes, with messages preserved.
## release: move symbol publication into its own phase
Right now, symbol publication happens every time we produce a final
bundle. In the future, we may be producing multiple bundles from the
same pipeline run, and we need to make sure we only do *one* symbol
publication to MSDL.
When we do that, it will be advantageous for us to have just one phase
that source-indexes and publishes all of the symbols.
## Remove Terminal's built-in copy of the VC Runtime
This removes the trick we pulled in #5661 and saves us ~550kb per arch.
Some of our dependencies still depend on the "app" versions of the
runtime libraries, so we are going to continue shipping the forwarders
in our package. Build rules have been updated to remove the non-Desktop
VCLibs dependency to slim down our package graph.
This is not a problem on Windows 11 -- it looks like it's shipped inbox.
**BREAKING CHANGE**: When launched unpackaged, Terminal now requires the
vcruntime redist to be installed.
## Prepare for toggling XAML between 2.7.0 and -prerelease on Win11
common.openconsole.props is a pretty good place to stash the XAML
version since it is included in every project (including the WAP
project (unlike the C++ build props!)).
I've gone ahead and added a "double dependency" on multiple XAML
versions. We'll toggle them with a build flag.
## Run the release pipeline twice, for Win10 and Win11, at the same time
This required some changes in how we download artifacts to make sure
that we could control which version of Windows we were processing in any
individual step.
We're also going to patch the package manifest on the Windows 11 version
so the store targets it more specifically.
On top of the prior three steps, this lets us ship a Windows 11
package that costs only ~15MB on disk. The Windows 10 version, for
comparison, is about 40.
The previous implementation only inverted the RGB values of the cell,
but failed to account for situations where the `color` is transparent,
which is the case when `backgroundOpaqueMixin` is 0 (for instance if
acrylic backgrounds are enabled). In these situations the alpha
component remained 0 which caused the cursor to be invisible.
For some inexplicable reason this issue is only visible on a HDR display,
even though it should also effect regular ones. God knows why.
With this commit the cursor texture is treated as a mask that inverts the color.
We use branching here, because I couldn't come up with a more clever solution.
## PR Checklist
* [x] Closes#12507
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Cursor is visible on a HDR display with acrylic background ✅
* TBD performance benchmark for `[branch]` ❌
Fixes two crashes amounting to 14% of our crash burden in Simulated
Selfhost. I can't reproduce this organically, but I was able to do so by
forcing the command palette to be empty.
## Summary of the Pull Request
In PR #12462, a new `maxversiontested` entry was added to the
_WindowsTerminal.manifest_ file which now gets propagated to the
_TerminalApp.Unit.Tests.manifest_ file whenever a full build is
executed. This PR is just committing the updated test manifest.
## PR Checklist
* [x] Closes#12543
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12543
## Summary of the Pull Request
Prevents a crash that could occur when invoking `wt C:\`
## PR Checklist
* [x] Closes#12535
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
Updates `CascadiaSettings::NormalizeCommandLine()` to check that there are a suitable number of command line arguments to be concatenated together, to prevent accessing an array index in `argv` that doesn't exist.
Also prevents a test flake that could occur in `TerminalSettingsTests::CommandLineToArgvW()`, due to generating an empty command line argument.
## Validation Steps Performed
Added a test, and checked that invoking each of the command lines below behaved as expected:
```
wtd C:\ # Window pops up with [error 2147942405 (0x80070005) when launching `C:\']
wtd C:\Program Files # Window pops up with [error 2147942402 (0x80070002) when launching `C:\Program Files']
wtd cmd # cmd profile pops up
wtd C:\Program Files\Powershell\7\pwsh -WorkingDirectory C:\ # PowerShell profile pops up in C:\
wtd "C:\Program Files\Powershell\7\pwsh" -WorkingDirectory C:\ # PowerShell profile pops up in C:\
wtd . # Window pops up with [error 2147942405 (0x80070005) when launching `.']
```
## Summary of the Pull Request
Somehow, the controls v2 update caused an issue where if you as much as _load_ a content dialog when there's already one open, we get holes in the terminal window (#12447)
This commit introduces logic to `TerminalPage` to check whether there is a content dialog open before we try to load another one.
## PR Checklist
* [x] Closes#12447
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Can no longer repro #12447
"Acrylic material" is the official name as used on Microsoft Docs
and should ensure it gets properly translated in all languages.
## PR Checklist
* [x] Closes#9846
* [x] Closes MSFT:36776499
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
We originally intended to replace the strings with "acrylic transparency",
but "acrylic material" is actually the official term on Microsoft Docs.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fix typos found by codespell. Some of it in documentation and user-visible text, mostly in code comments. While I understand you might not be interested in fixing code comments, one of the reasons being extra noise in git history, kindly note that most spell checking tools do not discriminate between documentation and code comments. So it's easier to fix everything for long maintenance.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: [#501](https://github.com/MicrosoftDocs/terminal/pull/501)
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I have checked and re-checked all changes.
When the dpi is changed, call `updateFont()` instead of `TriggerFontChange`, this
means that we continue to use the existing font features/axes
Closes#11287
## Summary of the Pull Request
Modifies the OneFuzz CI Job so that it attempts to read the notification config from a file rather than the command line.
## References
Potential oversight in #10431.
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
Noticed that the CI job was failing on main, so took a look. According to the [docs](7f7d76fa7f/docs/notifications.md (implementation)), files should be referenced using `@./` notation.
We chose to use the "ContextMenu" resource compartment when we
changed the package name to Terminal in #12264 because it was more
broadly localized than the rest of the application.
It appears as though some platform features have trouble with the
"more qualified" resource paths that #12264 required.
To fix this, we will:
1. Copy all of the ContextMenu localizations into CascadiaPackage's
resource root
2. Switch all manifest resource paths to use resources from the package
root.
Regressed in #12264Closes#12384Closes#12406 (tracked in microsoft/powertoys#16118)
As noted in #6759:
> `RtlCreateUnicodeString` creates a copy of the string on the process heap and the `PortName` variable has local-scope. The string doesn't get freed with `RtlFreeUnicodeString` before the function returns creating a memory leak.
> `CIS_ALPC_PORT_NAME` is a constant string and the `PortName` variable should instead be initialized using the `RTL_CONSTANT_STRING` macro:
>
> ```c++
> static UNICODE_STRING PortName = RTL_CONSTANT_STRING(CIS_ALPC_PORT_NAME);
> ```
I actually built this in the OS repo to make sure it'll still build, because this code doesn't even build outside Windows.
* [x] Closes#6759
* I work here.
I believe this fixes#12383, but I can't seem to find a way to set up a N SKU VM to confirm this.
* [ ] TODO: wait till the morning to finish copying the N vhd I found off the build shares, to confirm this doesn't crash on launch.
This has been a saga.
Basically, any resources in `App.xaml` aren't going to be able to reference other theme-aware resources. We can't change the theme of the app at runtime, only elements within the app. So we can't use `ApplicationPageBackgroundThemeBrush` in app.xaml, because it will ALWAYS be evaluated as the OS theme version of that brush.
* regressed in #12326
* See also #10864
* #3917 CANNOT be fixed in the same way. We're lucky here that the TabView uses a `{ThemeResource TabViewBackground}` in markup to set the bg. We're not similarly lucky with the Pane one.
* [x] closes#12356
* [x] Tested manually. You can confirm, my eyes are bleeding from the OS-wide light mode
#12348 introduced an off-by-one bug. While the `NormalizeCommandLine` loop
should exit early when there aren't at least _two_ arguments to be joined,
the final argument-append needs to happen even if just _one_ argument exists.
This commit fixes the issue and introduces changes to additionally monitor
the early loop exit, as well as the call to `ExpandEnvironmentStringsW`.
## PR Checklist
* [x] Closes#12461
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* All `TerminalSettingsTests` tests pass ✅
* use `FontFamily="{ThemeResource SymbolThemeFontFamily}"` where possible, in XAML
* use `FontFamily{ L"Segoe Fluent Icons, Segoe MDL2 Assets" }` in codebehind
Basically just a simple string replace.
* [x] This was a bullet point in #11353
* [x] Confirmed manually on my win10 PC
* see also #12438
Actually, this is the last bullet in #11353, so I'm gonna say closes#11353.
Screenshots below.
AtlasEngine enables various debug options for D2D and D3D in Debug builds.
Among those are resource leak checks, which were broken in OpenConsole
due to the unclean exit in `ServiceLocator::RundownAndExit`.
This commit fixes the issue by running the destructors
of any renderers registered in the Window class first.
## PR Checklist
* [x] Closes#12414
* [x] I work here
## Validation Steps Performed
* Set `HKEY_CURRENT_USER\Console\UseDx` to `2`
* Run `OpenConsole.exe`
* Exit
* No exceptions are thrown ✅
Now that we've figured out how to publish the public symbols to the official Microsoft download server... we may as well embed the source code linking information inside of them given that it's right here on GitHub. This attempts to run our existing source linking scripts against the public copy of the symbols.
## PR Checklist
* [x] Closes#12443
* [x] I work here
* [x] Tested manually
## Validation Steps Performed
* [x] Build with it: https://dev.azure.com/microsoft/Dart/_build/results?buildId=44930661&view=logs&j=8f802011-b567-5b81-5fa6-bce316c020ce
* [x] Point the debugger at them and see if it can find the sources
* [x] Maybe also look at them in a hex editor or whatnot and validate I can see the source paths pointing at GitHub
Updates this narrator announcement message to include the number of results it found. There are two versions:
* one for a singular result
* one for multiple results.
which should help with loc.
We're trying to get this in with the loc hotfix, so 👀 please
* [x] will take care of the last bit of #7907
verified with narrator locally.
We're now building a fully provenance, compliance, and security
validated package (vpack) through our Release pipeline. This attaches
the last phase which automates the submission into the Windows product.
It will also automatically trace back the source, commit SHA, and build
to the submission here from the Windows side.
* [x] Automates a manual activity I performed a few times recently
* [x] I work here
* [x] Ran a test of it against `release-1.12` and it worked
## Summary of the Pull Request
Followup from our discussion during team sync, the 'automatic adjustment of indistinguishable text' setting is going to be enabled for dev builds only.
## References
#12160
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Setting appears on dev build and the feature works
## Summary of the Pull Request
The only method that was really needed in the `AdaptDefault` class was
the `PrintString` method, and that could easily be moved into the
`ConGetSet` interface. That lets us get rid of the `AdaptDefault` class
altogether, simplifying the construction of the `AdaptDispatch` class,
and brings us more in line with the `TerminalDispatch` implementation.
## PR Checklist
* [x] Closes#12318
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12318
## Detailed Description of the Pull Request / Additional comments
The `Execute` method was never used at all, so there was no problem with
losing that. But I also noticed there was an equivalent `ExecuteChar`
method in the `ITerminalApi` interface, which also wasn't being used, so
I've removed that too.
Then there was a `Print` method taking a single `wchar_t` parameter, but
that was ultimately implemented as a `PrintString` call anyway, so that
translation could easily be accomplished in the `AdaptDispatch` calling
code, the same way it's done in `TerminalDispatch`.
That left us with the `PrintString` method, which could simply be moved
into the `ConGetSet` interface, which would then more closely match the
`ITerminalApi` interface.
There was also a `GetResult` method, that returned the status of the
last `PrintString`, but that result was never actually checked anywhere.
What I've done now is make the `PrintString` method throw an exception
on failure, and that will be caught and logged in the `StateMachine`.
## Validation Steps Performed
I've started a bash shell in conhost to verify that it still works.
Since almost everything goes through `PrintString` in VT mode, it should
be obvious if something was broken.
## Summary of the Pull Request
Other than the `s_ResizeWindow` function, the `DispatchCommon` class was
just a couple of static functions indirectly calling the `ConGetSet`
interface. So by moving the `s_ResizeWindow` implementation into the
`ConhostInternalGetSet` class, we could easily replace all usage of
`DispatchCommon` with direct calls to `ConGetSet`.
## PR Checklist
* [x] Closes#12253
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12253
## Validation Steps Performed
I've manually confirmed the resizing operations still work as expected.
The other functions are harder to test, but were trivial replacements.
Basically, some WSL distros ship fragments that replace the `commandline` with the executable for their distro (`ubuntu.exe`, etc.). We didn't expect that when we changed the `startingDirectory` for them all to `~`.
Unfortunately, `~` is really never a valid path for a process on windows, so those distros would now fail with
```
[error 2147942667 (0x8007010b) when launching `ubuntu1804.exe']
Could not access starting directory "~"
```
If we find that we were unable to mangle `~` into the user's WSL `commandline`, then we will re-evaluate that `startingDirectory` as `%USERPROFILE%`, which is at least something sensible, if albeit not what they wanted.
* regressed in #12315
* [x] Closes#12353
* [x] Tested with a (`ubuntu1804.exe`, `~`) profile - launched successfully, where 1.13 in market fails.
* [x] added tests
We absolutely cannot allow a defterm connection to
auto-elevate. Defterm doesn't work for elevated senarios in the
first place. If we try accepting the connection, the spawning an
elevated version of the Terminal with that profile... that's a
recipe for disaster. We won't ever open up a tab in this window.
* [x] Closes#12370
* [x] Tested manually, since there's not a great way to add defterm tests
This PR updates the `ITerminalApi` and `TerminalDispatch` classes to
allow exceptions to be thrown in case of errors instead of using boolean
return values.
## References
This brings the Terminal code into alignment with the `AdaptDispatch`
and `ConGetSet` changes made in PR #12247.
And while this isn't exactly a fix for #12378, it does at least stop the
app from crashing now.
## Detailed Description of the Pull Request / Additional comments
All the `TerminalDispatch` methods have had their `noexcept` specifiers
dropped, and any `try`/`catch` wrapping removed, so exceptions will now
fall through to the `StateMachine` class where they should be safely
caught and logged.
The same goes for the `ITerminalApi` interface and its implementation in
the `Terminal` class. And many of the methods in this interface have
also had their `bool` return values changed to `void`, since there is
usually not a need for error return values now.
## Validation Steps Performed
I've manually tested the `OSC 9;9` sequence described in #12378 and
confirmed that it no longer crashes.
This adds some validation in the `UiaTextRange` ctor for the cursor position.
#8730 was caused by creating a `UiaTextRange` at the cursor position when it was in a delayed state (meaning it's purposefully hanging off of the right edge of the buffer). Normally, `Cursor` maintains a flag to keep track of when that occurs, but Windows Terminal isn't maintaining that properly in `Terminal::WriteBuffer`.
The _correct_ approach would be to fix `WriteBuffer` then leverage that flag for validation in `UiaTextRange`. However, messing with `WriteBuffer` is a little too risky for our comfort right now. So we'll do the second half of that by checking if the cursor position is valid. Since the cursor is really only expected to be out of bounds when it's in that delayed state, we get the same result (just maybe a tad slower than simply checking a flag).
Closes#8730
Filed #12440 to track changes in `Terminal::_WriteBuffer` for delayed EOL wrap.
## Validation Steps Performed
While using magnifier, input/delete wrapped text in input buffer.
With the recent change to allow text boxes to be bigger, the `Browse` button that some of them have was getting cut off when the window was too narrow. This change puts the `Browse` button below the text box instead of next to it to prevent this issue.
## PR Checklist
* [x] Closes#12335
Segoe Fluent isn't available on Windows 10, and doesn't stealthily ship with WinUI. So if we manually set the font family to `"Segoe Fluent Icons"`, then that will just display boxes in Win10.
This instead uses the resource `"{ThemeResource SymbolThemeFontFamily}"` which will gracefully fall back on Win10.
See:
* https://github.com/microsoft/microsoft-ui-xaml/issues/3745, which inspired this solution.
Guess what! The backgound image icons were also manually specifying this font, so they had to get updated too. I couldn't find any other `Segoe Fluent` references in the code.
* [x] Closes#12350
* [x] Checked Windows 11 locally
* [x] Checked Win10 (screenshots incoming from other machine)
This commit fixes an issue, where we failed to emit a DECTCEM sequence to hide
the cursor if it was hidden before XtermEngine's first frame was finalized.
Even in such cases we need to emit a DECTCEM sequence
in order to ensure we're in a consistent state.
## Validation Steps Performed
* Added test✅
* Run #12401's repro steps around 30 times✅Closes#12401
The focus box around the color schemes combo box was getting cut off, this change adds a small margin to the stackpanel to allow space for the focus box
## PR Checklist
* [x] Closes#12328
I have no idea how this is even possible to hit. If this is able to be null, then we failed to load the settings in such a catastrophic way that nothing should work. However, OP's Terminal seemed to have already loaded the settings. By all accounts, doesn't make sense.
Regardless, the code here would crash if this ever is null, so we may as well catch it.
* [x] Closes#12360
* [ ] No way to verify this since it isn't even reproable on OPs machine, but it does have a lot of hits for that failure bucket (!!!)
The previous code had two bugs for:
* paths with more than 1 whitespace
The code joins the argv array by replacing null-word terminators with
whitespace. Unfortunately it always referred to the separator between
`argv[0]` and `argv[1]` for this instead of continuing to join
those between 1 and 2, etc.
* paths sharing a common prefix with another directory
`SearchPathW` returns paths that aren't necessarily paths to files.
A call to `GetFileAttributesW` was added, ensuring we only resolve file paths.
## PR Checklist
* [x] Closes#12345
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* Paths with more than 1 whitespace resolve correctly ✅
* Paths with neighboring directories sharing a common prefix resolve correctly ✅
* Tests added ✅
## Summary of the Pull Request
After 'must', the verb is used without 'to'. Correct: "must" or "have to".
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Not required, only comment has been changed.
## Summary of the Pull Request
We no longer do anything when the rightmost breadcrumb is invoked
## PR Checklist
* [x] Closes#12325
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Tested manually, cannot repro #12325 anymore
The `x-generate` statement seems to have fallen apart somewhere and is no longer generating the valid list of languages for display. This hardcodes the list into the manifest to restore it, which is a valid option per the documentation.
We also hardcode the limited subset of languages into the Settings application because the main application supports fewer languages than we have been translated into for the shell extensions for Windows Explorer and Start Menu integration.
## PR Checklist
* [x] Closes#12351
* [x] I work here.
* [x] Manual tests below
## Validation Steps Performed
- [x] Clean built locally with `msbuild.exe openconsole.sln /p:Configuration=Release /p:Platform=x64 /p:WindowsTerminalBranding=Release /t:Terminal\CascadiaPackage /m /bl:log4.binlog` and checked that the `appxmanifest.xml` that popped out the other side contained the same languages that it used to contain.
- [x] Built in the release pipeline
- [x] Installed release and preview branded packages. Changed my machine language to Polish (pl-PL) which is not one of the fully localized languages, but is one of the limited ones. Checked the start menu and right-click menus and saw Polish text for Terminal and Terminal Preview. Checked the Settings page in our app and saw only the limited 14 language list for the application itself.
## Summary of the Pull Request
Reducing the `MinWidth` of a toggle switch means it no longer needs a negative margin to align it correctly
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Setting a different language no longer causes the toggle switch to fall out of the expander
We're investigating an issue where the build succeeded but something still got lost somewhere. If we had the binlogs, maybe we could diff and track it down faster.
## Summary of the Pull Request
This PR refactors the `ConGetSet` API, eliminating some of the bloat produced by the `DoSrvPrivateXXXX` functions, simplifying the method naming to more closely match the `ITerminalApi` interface, and making better use of exceptions for error conditions in place of boolean return values.
## References
This is another small step towards merging the `AdaptDispatch` and `TerminalDispatch` classes (#3849).
## PR Checklist
* [x] Closes#12193
* [x] Closes#12194
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #3849
## Detailed Description of the Pull Request / Additional comments
There are two main parts to this. The first step was to get rid of all the `DoSrvPrivateXXX` functions, and move their implementation directly into the `ConhostInternalGetSet` class. For the most part this was just copying and pasting the code, but I also fixed a couple of bugs where we were using the wrong output buffer (the global buffer rather than the one associated with the output handle), and got rid of some unnecessary calls to `GetActiveBuffer`.
The second part was to make better use of exceptions for error conditions. Instead of catching the exceptions at the `ConGetSet` level, we now allow them to fall through all the way to the `StateMachine`. This greatly simplifies the `AdaptDispatch` implementation since it no longer needs to check a boolean return value on every `ConGetSet` call. This also enables the getter methods to return properties directly instead of having to use a reference parameter.
## Validation Steps Performed
A number of the unit tests had to be updated to match the new API. Sometimes this just required changes to method names, but in other cases error conditions that were previously detected with boolean returns now needed to be caught as exceptions.
There were also a few direct calls to `DoSrvPrivateXXX` functions that now needed to be invoked through other means: either by generating an equivalent escape sequence, or calling a lower level API serving the same purpose.
And in the adapter tests, the mock `ConGetSet` implementation required significant refactoring to match the new interface, mostly to account for the changes in error handling.
We have to do this so that the store sees us as one thing ("Windows
Terminal") and the Start menu sees us as another ("Terminal").
The store will reject our package if the value we use for "DisplayName"
here doesn't match the store's "reserved names".
This value is *not used* by the start menu.
- The add new profile page now uses a dropdown rather than radio buttons
- Subheaders, breadcrumb bar, buttons etc are now all centralized when the window is maximized (so they all align with the expanders now)
- We no longer override the titlebar colors and instead use the xaml defaults (these still aren't great but at least we will get the fix automatically when it happens upstream)
- Breadcrumb bar no longer has a negative margin, so there's no weird overlap that happens when the window becomes small
- The number boxes for launch size and font size now use the `Inline` placement mode rather than compact, allowing modification to the number with fewer clicks
- Textboxes now have a greater max width so they can occupy more space in the expander if needed
## Summary of the Pull Request
When using a screen reader, the buttons on the "add a new profile" page were being read weirdly:
- "New empty profile" button read as "create new button button"
- "duplicate" button read as "duplicate button button"
It's generally standard to read out the text inside the button, so I did just that by reusing the existing localized resources. This also removes the redundant "button" that is said by the screen reader.
I also removed the unused `AutomationId` and unnecessary `Button.Content` tags.
#11156 can be closed upon validation by the accessibility team.
## Validation Steps Performed
✅ navigate to both buttons using Narrator; make sure it sounds right
## Summary of the Pull Request
Adds some polish around the navigators in the profile page (i.e. "appearance" and "advanced" button) by doing the following:
- use the localized resources for the pivot on the navigators
- simplify the navigators to be buttons instead of toggle buttons
Doing so has Narrator identify these as buttons rather than toggle buttons. So now Narrator won't say that the button is "off", which just makes more sense.
## Validation Steps Performed
✅ Narrator says "Advanced button" or "Appearance button" on the navigator
✅ The navigators look the same as before
Since we turned this feature on in windows, and it relies on _lying
about the contents of the registry_, Terminal needs to be in on the
joke.
This will need to be reverted and serviced if we choose not to ship like
this.
Fixes#12308
`IDWriteTextAnalyzer::GetGlyphs` is not enough to get a
`DWRITE_SHAPING_TEXT_PROPERTIES::canBreakShapingAfter`
value that works for combining diacritical marks.
This requires an additional call to `GetGlyphPlacements`.
This commit increases CPU usage for complex text by ~10%.
## PR Checklist
* [x] Closes#11925
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* ``echo "[e`u{0301}`u{0301}]"`` prints an "e" with 2 accents ✅
I added a condition to exclude some of the NuGet PGO stuff when there was no build mode, but appear to not have propagated any of it in the PGD merge job. This sets it to Optimize here so it'll go through.
## PR Checklist
* [x] Closes#12300
* [x] I work here.
* [x] It blends.
## Validation Steps Performed
* [x] Ran the PGO Instrument Phase
* [x] Ran the PGO Optimize Phase
Basically, this is the same as #12266, but for the `SearchBoxControl`. Trickily, the ControlCore is the one that knows if there were search results, but the TermControl has to be the one to announce it.
* [x] Will take care of #11973 once a11y team confirms
* [x] Tested manually with Narrator
* [x] Resolves a part of #6319, which I'm repurposing just to displaying the number of results in general.
* See also #3920
The pull request fixes the issue where "sizeof" parameter was use instead of "ARRAYSIZE".
## PR Checklist
* [x] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
This was a pretty straight forward issue, i just replace sizeof which gives the byte size with ARRAYSIZE which give the number of elements in the array.
## Summary of the Pull Request
This adds names to more of our focusable elements. This should be the rest of them that I missed in #11364
## References
* #9990: a11y megathread
* #11155: original version of this
## PR Checklist
* [x] Should take care of #11996 once confirmed
* [x] I work here
## Validation Steps Performed
Used Accessibility Insights to verify.
## Detailed Description of the Pull Request / Additional comments
There is one other weird bit. All the expanders that have content below the expander (not inline), show up as focusable, but don't have names. Even when I add names to them. I believe this is due to https://github.com/microsoft/microsoft-ui-xaml/issues/5820, which is fixed in https://github.com/microsoft/microsoft-ui-xaml/pull/6032, in https://github.com/microsoft/microsoft-ui-xaml/releases/tag/v2.8.0-prerelease.220118001. Unfortunately, we're on a 2.7 prerelease, so we don't have that fix yet. I may see how painful moving to that is, because we're gonna get another a11y ping as soon as 1.13 ships.
I pre-emptively added names to these guys in f7ba158dc, so that the new MUX should just fix this without any thinking on our part.
Introduced in #11416
We weren't using these macros for duplicating as well, so I forgot to duplicate a couple settings. This PR switches duplicating over to using the macros as well, which shou;d reduce future bugs.
Also adds notes to which properties are intentionally omitted from these macros.
* [x] closes#12265
* [x] Verified manually that #12120 still works as expected
Sorry for combining two fixes in one PR. I can separate if need be.
* [x] Closes#12276:
- `"bellSound": null` didn't work. This one was easier, and is atomically in bcc2ca04fc. Basically, we would deserialize that as an array with a single empty string in it, which we'd try to then play. I think it's more idomatic to have that deserialized as an empty array, which correctly falls back to playing the default sound.
* [x] Closes#12258:
- This one is the majority of the rest of the PR. If you leave the MediaPlayer open, then the media keys will _affect the Terminal_. More importantly, once the bell sounds, they'd replay the bell, which is insane. So the fix is to re-create the media player when we need it. We do this per-pane for simpler lifetime tracking. I'm not worried about the overhead of creating a mediaplayer here, since we're already throttling bells.
* Originally added in #11511
* [x] Tested manually
- Use [`no.mp4`](https://www.youtube.com/watch?v=x2w9TyCv2gk) for this since that's like, 17s long
- Checked that closing panes / the terminal while a bell was playing didn't crash
- Playing a bunch of bells at once works
- closing a pane stops the bell it's playing
- once the bell stops, the media keys went back to working for Spotify
* [x] I work here
## Summary of the Pull Request
Fix various things from the recent SUI changes
- The Appearance/Advanced toggle buttons now have a max width
- We don't need `Profiles.cpp` anymore
- The `Elevate` setting is now back in the SUI
- There is no longer an alignment difference between non-expander settings and expander settings
- Expander settings no longer require hitting `Tab` twice to get to them
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
According to https://github.com/microsoft/microsoft-ui-xaml/issues/1971, `PaneFooter` does not set the `SizeOfSet` or `PositionInSet` properties. However, `FooterMenuItems` does and works for our scenario. So we just replaced `PaneFooter` with `FooterMenuItems`.
Will handle #11154 upon verification from the accessibility team.
## Validation Steps Performed
✅ Verified using Accessibility Insights
✅ "Open Json File" button can still be invoked and keyboard navigated to as expected
There were a number of methods in the `IStateMachineEngine` interface
which controlled how the `StateMachine` interpreted escape sequences.
But essentially what it came down to was a bunch of a properties that
were always true for the `InputStateMachineEngine`, and always false for
the `OutputStateMachine` engine. To simplify the implementation, and
make things a little more efficient, I've now replaced all of those
virtual calls with a single boolean field in the `StateMachine` that is
initialised in the constructor.
I started by adding an `isEngineForInput` parameter to the constructor
to indicate the the type of engine being passed in. But to keep things
simple for callers, and I also then added a constructor without that
parameter, which could derive the value automatically based on the type
of the engine pointer.
Then in the `StateMachine` implementation, anywhere we were previously
calling `ParseControlSequenceAfterSs3`, `FlushAtEndOfString`,
`DispatchControlCharsFromEscape`, or `DispatchIntermediatesFromEscape`,
we now just reference `_isEngineForInput`. But I've also copied across
some of the original comments from those methods, to make it clear at
the point of usage why we have a difference in behavior for input and
output.
To make sure the unit tests would catch any problems, I hardcoded the
`_isEngineForInput` field to `false`, and confirmed that it broke a
bunch of input engine tests. Then I hardcoded it to `true`, and
confirmed that it broke a bunch of state machine and output engine
tests. With the `_isEngineForInput` set correctly, everything passed.
I also manually tested the various output edge cases that would be
effected by this code - C0 controls within an escape sequence, time
delays in the middle of an escape sequence, `SCS` character set
selection which requires intermediates following an escape, and a G3
single shift select which depends on `SS3`.
Closes#12254
I didn't have the tray icon enabled before I suppose, so this never got hit? Anyhow, we need to change where we look for the AppName. Otherwise we crash on launch 😨
* [x] fixes `main`
* [x] I work here
* regressed in #12264
* [x] Tested by: actually running the Terminal with this, it launched
## Summary of the Pull Request
**Note: This PR targets #11720**
Replaces our old pivot-style settings UI with a breadcrumb bar style, as per the windows 11 style guidelines. This required splitting `Profiles.xaml` into 3 separate files, `Profiles_Base.xaml` for general settings, `Profiles_Appearance.xaml` for appearance settings, `Profiles_Advanced.xaml` for advanced settings
The header in the navigation view is now a [BreadcrumbBar](https://docs.microsoft.com/en-us/windows/apps/design/controls/breadcrumbbar), which can be used to navigate back to `Profiles_Base` after moving into the advanced or appearance page (see GIF below)
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
This commit fixes the following issues when ClearType rendering is enabled:
* Colored glyphs are now drawn using grayscale AA, similar to all current
browsers. This ensures proper gamma correctness during blending in our
shader, while generally making no discernable difference for legibility.
* Our ClearType shader only emits fully opaque colors, just like the official
ClearType implementation. Due to this we need to force grayscale AA if the
user specifies both ClearType and a background image, as the image would
otherwise not be visible.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Grayscale AA when drawing emojis ✅
* Grayscale AA when using a background image ✅
## Summary of the Pull Request
Updates our SUI to follow the windows 11 style guidelines. Includes updating our setting containers to follow the 'expander' style.
## PR Checklist
* [x] Closes#10631
* [x] Closes#9978
* [x] Closes#9595
* [x] Closes#11231
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
This fixes a bug where several settings would not show the reset button. The root cause of this issue is two fold:
1. Hooking up `CurrentXXX`
- `GETSET_BINDABLE_ENUM_SETTING` was hooked up to the **settings** model profile object instead of the **view** model profile object. Since the settings model has no `PropertyChanged` system, any changes were directly being applied to the setting, but not notifying the view model (and thus, the view, by extension) to update themselves.
- This fix required me to slightly modify the macro. Rather than using two parameters (object and function name), I used one parameter (path to getter/setter).
2. Responding to the `PropertyChanged` notifications
- Now that we're actually dispatching the `PropertyChanged` notifications, we need to actually respond to them. This behavior was defined in `Profiles::OnNavigatedTo()` in the `PropertyChanged()` handler. Funny enough, that code was still there, it just didn't do anything because it was trying to notify that `Profiles::CurrentXXX` changed. This is invalid because `CurrentXXX` got moved to `ProfileViewModel`.
- The fix here was pretty easy. Just move the property changed handler to `ProfileViewModel`'s `PropertyChanged` handler that is defined in the ctor.
## References
Bug introduced in #11877
## Validation Steps Performed
✅ Profile termination behavior
✅ Bell notification style
✅ Text antialiasing
✅ Scrollbar visibility
Turns out, this bug only repros in Controls version 2. I'm not sure why, but it didn't repro only on main. So this fix does nothing until #11720 merges.
This PR prevents us from setting properties on the paste warning dialog unless we actually need to paste. 5f9c551b7e proves that settings these properties is what would cause the bug in the first place.
I went a step further and cleaned this up a bit. This was always a little weird, having to get the `BracketedPasteEnabled` for the active control on the UI thread before we actually display the warning. In the post-#5000 future where going back to the control like this would be a x-proc hop, I figured I should just skip that entirely and plumb the `BracketedPaste` state out in the initial request.
* [x] Closes#12202
* [x] I work here
* [x] No tests, but there's not a great place for a test like this
* [x] Doesn't affect docs
See also: #12241 which would introduce #12202 on its own.
Just like the shift+click and the alt click shortcuts, now Ctrl+Click will launch a new window with that profile, elevated.
I also found that the GenerateName wasn't updated for the elevate arg, so added that. I considered adding the following to the defaults, but decided against it. It added 10 more entries to the command palette that were only separated by the `elevate: true` param, so that didn't feel valuable. Those are posted below for posterity.
* [x] closes https://github.com/microsoft/terminal/projects/5#card-50759221
* [x] Tested manually
Includes a semi-related dead code removal for the `elevated` param for `_OpenNewWindow`, which didn't end up being used, and wouldn't work as intended anyways.
This should be most of the surfaces that we really care about for displaying "Windows Terminal". There's a pile of other references in code, but I couldn't find any other resources that mention it.
I left a lot of the references to Windows Terminal throughout. Seemed like it was fine to keep calling it that in most places, just these localized strings that are going to be displayed in the Shell that should be changed.
Rough compare:
The strings were also moved to the Context Menu resources file, because that's localized into more languages.
@DHowett we may want to spin a full build to make sure this works and I didn't miss anything
* [x] Closes#12091
There are a couple places where we now bail immediately on startup, if we think the window is going to get created without any tabs. We do that to prevent a blank window from flashing on the screen when launching auto-elevate profiles. Unfortunately, those broke defterm in a particularly hard to debug way. In the defterm invocation, there actually aren't any tabs when the app completes initialization. We use the initialization to actually accept the defterm handoff. So what would happen is that the window would immediately close itself gracefully, never accepting the handoff.
In my defense, #8514, the original auto-elevated PR, predates defterm merging (906edf7) by a few months, so I totally forgot to test this when rolling it into the subsequent iterations of that PR.
* Related to:
* #7489
* #12137
* #12205
* [x] Closes#12267
* [x] I work here
* [ ] No tests on this code unfortunately
* [x] Tested manually
Includes a semi-related code fix to #10922 to make that quieter. That is perpetually noisy, and when trying to debug defterm, you've only got about 30s to do that before it bails, so the `sxe eh` breaks in there are quite annoying.
This commit extracts DirectWrite related shader code into dwrite.hlsl
and adds support for ClearType blending.
Additionally the following changes are piggybacked into this commit:
* Some incorrect code around fallback glyph sizing was removed as
this is already accomplished by `CreateTextLayout` internally
* Hot-reload failed to work with dwrite.hlsl as the `pFileName`
parameter was missing
* Legibility of the dotted underline was improved by increasing
the line gap from 1:1 to 3:1
Part of #9999.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Types are clear ✅
When we gave users the ability to configure how the `SGR 1` attribute
should be rendered, we described those options as "intense is bright"
and "intense is bold". Internally, though, we still referred to the `SGR 1`
attribute as bold. This PR renames all occurrences of "Bold" (when
referring to the `SGR 1` attribute) as "Intense", so the terminology is
more consistent now.
PR #10969 is where we decided on the wording to describe the `SGR 1`
attribute.
Specific changes include:
* `TextAttribute::IsBold` method renamed to `IsIntense`
* `TextAttribute::SetBold` method renamed to `SetIntense`
* `VtEngine::_SetBold` method renamed to `_SetIntense`
* `ExtendedAttributes::Bold` enum renamed to `Intense`
* `GraphicsOptions::BoldBright` enum renamed to `Intense`
* `GraphicsOptions::NotBoldOrFaint` enum renamed to `NotIntenseOrFaint`
* `SgrSaveRestoreStackOptions::Boldness` enum renamed to `Intense`
## Validation Steps Performed
I've checked that the code still compiles and the unit tests still run
successfully.
Closes#12252
## Summary of the Pull Request
Expands on #9582. If the command palette finds results, the screen reader says "Suggestions available".
Makes the scenario mentioned in #7907 work.
This is sufficient for various reasons:
1. According to the bug report, saying that suggestions are available is sufficient
> Screen reader should provide the results info on searching commands like 10 results found or suggestions available when there are any search results (Source: #7907)
2. This is common practice. Settings app and XAML Controls Gallery do this for their search box.
Also, the user should be able to know how many results were found by tabbing/selecting a result item. When this is done, the screen reader will use `SizeOfSet` and `PositionInSet` to announce how many results were found and which one we're currently on.
## Validation Steps Performed
Verified this behavior using Narrator.
Verified it matches the behavior of the Settings app and the XAML Controls Gallery.
This makes the scenario mentioned in #8480 work. It's maybe not as holistic a solution as we'd like, but it definitely works.
Tested both with Narrator, and using the TabView scroll handles to get tab focus into the tab row manually
* [x] Closing the _active_ tab with <kbd>Ctrl+Shift+w</kbd> works (not the `TabViewItem` that has focus, but that's how Edgium works so that seems fine)
* [x] Opening a tab with <kbd>Ctrl+Shift+t</kbd> works
* [x] Opening the cmdpal with <kbd>Ctrl+Shift+p</kbd> works
* [x] Will take care of #8480 once we get the a11y team to validate
* [x] I work here
#### Notes:
None of
```xaml
PreviewKeyDown="_KeyDownHandler"
KeyDown="_KeyDownHandler"
KeyUp="_KeyDownHandler"
```
On the TerminalPage directly seem to fire when the focus is in the `TabViewItem` or the New Tab flyout. But they fire just fine when focus is in the `TermControl`. Interesting, because you'd think that the `TermControl` would have already handled the key...
## Summary of the Pull Request
Makes `Model::DefaultTerminal` an `IStringable`, which presents it as a string, when possible. This enables text search for defterm's setting. This also enables screen readers to identify the combo box items by their text content (app name, author, and version) as opposed to being treated as an item containing more text. As a part of that, I cleaned up the UIA tree to treat the item's name as "\<name\>, \<author\>, \<version\>". This is consistent with how the Settings App presents installed apps in Apps > Installed apps.
#11251 will be resolved upon verification by the accessibility team.
## Validation Steps Performed
Verified using Narrator and Accessibility Insights.
The PGO helpers NuGet had the Y2K22 bug. This receives and integrates the updated package in our project to restore NuGet functionality.
## PR Checklist
* [x] Closes#12261
* [x] I work here
* [x] If it builds it sits.
## Validation Steps Performed
* [x] Build new PGO instrument data with this pipeline update: https://dev.azure.com/microsoft/Dart/_build/results?buildId=44304850&view=results
More fallout from the settings refactor. Probably because testing on a Windows
10 device is hard, because you actually need a physical machine to get acrylic
to behave correctly.
Basically, the code is simpler now, but we missed the windows 10 only edge case
where acrylic can get turned on, but we forget to enable the acrylic brush, so
it just stays off.
Refer to #11619 where this regressed, and #11643, #12229, because this is just a
hard problem apparently
* [x] Closes#11743. Technically OP is complaining about behavior that's
by-design, but it made me realize this regressed in 1.12.
* [ ] No tests on this part of the `TermControl` unfortunately.
* [x] Hauled out my old Win10 laptop to verify that opacity works right:
- [x] A fresh profile isn't created with any opacity
- [x] Mouse wheeling turns on acrylic
- [x] Using `opacity` only in the settings still stealthily enables acrylic
This will turn the feature on always from this point on. That means 1.13 Stble
would be the first Stable release to have this feature (unless we cherry-pick
this to 1.12 stable, which we may)
* [x] Closes#12220
* [x] I work here
Manifest validation won't accept migration/initialization of HKCU-based registry keys anymore. The enforcement scripts says that they should be defined in code instead. So here it is: defined in code insteead.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 67c720b628de4acefbc381891b7e7d29d387038e
Related work items: MSFT-37867666
[Git2Git] Merged PR 6881093: BUILD FIX: Reintroduce BOM to conhost manifests
Related work items: MSFT-37882151
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev b6f388b08b0b431ffc5663fe27eef260688febd6
I can find the commit where this regressed tomorrow if needed. In #10685 we stopped emitting these notifications while we were deferring cursor drawing. We however forgot to send the notification at the end of the defer.
This likely has a small perf impact. We however do need these cursor position events for IMEs to be able to track the cursor position (and low key for #10821)
* [x] regressed in #10685
* [x] Closes#11170
* [x] I work here
* [x] Tests added
This gets rid of warnings like
```
NU1102: Unable to find package Microsoft.NETCore.App.Host.win-x64 with version (= 3.1.21)
- Found 1 version(s) in TerminalDependencies [ Nearest version: 3.1.18 ]
```
Technically, there's a `NETCore.App.Host.3.1.21` that's out now. We _could_
migrate to that, but then we'd have to make sure to manually re-upload that
nuget package to our nuget feed, and then we'd still get this warning the
next time that package is updated.
Theoretically, there's a 6.x version too, but considering this is a debugging
tool, we don't care all that much.
* [x] I work here
* [x] Discussed this with Dustin
* [x] Gets rid of a SUPER TRIVIAL warning.
Since `AtlasEngine` prefers drawing without alpha for performance reasons,
calls to `EnableTransparentBackground` require a draw cycle.
This PR makes `Renderer::_NotifyPaintFrame` public and calls it.
Related to #9999.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Open Windows Terminal command palette
* Choose "Set background opacity..."
* Cycling through the items without selecting one
changes background opacity immediately ✅
`Renderer` owns the information of the hovered interval in `_hoveredInterval`
and provides no access to this information. We can only infer it from calls
to `PaintBufferGridLines`, if we're given the request to draw an underline
despite the previous call to `UpdateDrawingBrushes` not specifying it.
While it'd be possible to fix this and pass the underline flag to
`UpdateDrawingBrushes`, I personally consider this aspect of `Renderer` to be
a "leaky abstraction" as it's inherently incompatible with any engine not
working like `DxEngine`, such as the `AtlasEngine`. It's likely more
worthwhile to fundamentally change the `Renderer` architecture in the future.
## PR Checklist
* [x] Closes#11871
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Launch pwsh.exe
* Hyperlinks are underlined when hovered ✅
* Launch WSL / bash
* Run `printf '\e]8;;http://example.com\e\\This is a link\e]8;;\e\\\n'`
* Hyperlink is underlined when hovered ✅
Less "merge conflict" and more "something that got missed in a merge".
The offending commits are
* 68ab807
* b3fab51
The Fuzzer build doesn't run on PR, so it didn't notice this couldn't build.
@carlos-zamora as an FYI
This commit also introduces a check that we are in an interactive
session before we perform handoff, so as to not break service accounts.
It also adds some tracing.
The only way to notice that LeaveCriticalSection() was called more
often than EnterCriticalSection() is by calling EnterCriticalSection()
again in the future, which will then deadlock.
Since this bug occurs on exit it wasn't noticeable with the old console lock.
With the new, stricter ticket lock this bug causes a fail-fast exit.
## PR Checklist
* [x] Closes#12168
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Launch and then exit Windows Terminal
* OpenConsole cleanly exits ✅
This is a collection of fixes:
* dd213a5c18: This was a crash I discovered while investigating. Probably not the root cause crash, but a crash nonetheless.
* ba491212afcbafdabc89d88b78f1dc5076dea0c3...0b18ae4ed73cbb15452c7c15aefa0c2671db9605: A collection of fixes to _not_ create the window when we're about to handoff each of the new tabs, panes, to an elevated window. That should prevent us from starting up XAML at all, which should take care of #12169. Additionally, it'll prevent us from restoring the unelevated windows, which should resolve#12190
* The remainder of the commits where fixes for other weird edge cases as a part of this. Notably:
* ff72599189: Autopromote the first `split-pane` to a new tab, in the case that it's preceded with only `new-tab` actions that opened elevated windows.
#### checklist
* [x] I work here
* [x] Docs are fine
* [x] Closes#12190
* [x] Closes#12169
This commit correctly restores the previous opacity when the command palette
preview is cancelled. It includes an additional change in order to make the
`AdjustOpacity` setter consistent and symmetric with the `Opacity` getter.
## PR Checklist
* [x] Closes#12228
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Open Windows Terminal command palette
* Choose "Set background opacity..."
* Cycle through the items without selecting one
* Press Escape
* Previous opacity is restored ✅
This minor change makes it possible to hot-reload the AtlasEngine shaders under
Windows Terminal. Launching an UWP application from Visual Studio doesn't
necessarily result in a working directory inside the project folder,
which makes relative file paths impractical. While the `__FILE__` macro is
compiler dependent it works under our build setup with MSVC at least.
## Validation Steps Performed
* Shader hot-reloading works under Windows Terminal ✅
With the introduction of a common `RenderSettings` class in 62c95b5,
`PaintBufferGridLines` was now uniformly called with a proper alpha-less
`COLORREF` argument. This commit crudely fixes the issue by forcing
the color to be fully opaque in the `DxEngine` class.
## PR Checklist
* [x] Closes#12223
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Launch pwsh.exe
* Hyperlinks get underlines on hover ✅
When title updates are forwarded from the host to the client terminal,
they're passed over conpty in an `OSC 0` sequence. If there are any
control characters embedded in that title text it's essential they be
filtered out, otherwise they are likely to be misinterpreted by the VT
parser on the other side. This PR fixes a case where that sanitization
step was missed for titles initialized at startup.
Originally the sanitization step was handled in `DoSrvSetConsoleTitleW`,
which catches title changes made via VT escape sequences, or through the
console API, but missed the title initialization at startup. I've now
moved that sanitization code into the `CONSOLE_INFORMATION::SetTitle`
method, which should cover all cases.
This sanitization is only meant to occur when in "pty mode", though,
which we were originally establishing with an `IsInVtIoMode` call.
However, `IsInVtIoMode` does not return the correct result when the
title is set at startup, since the VT I/O thread is not initialized at
that point. So I've instead had to change that to an `InConptyMode`
call, which determines the conpty state from the launch args.
## Validation Steps Performed
I've manually confirmed the test case described in issue #12206 is now
working correctly.
However, the change to using `InConptyMode` caused some of the unit
tests to fail, because there isn't a real conpty connection when
testing. Fortunately there are some `EnableConptyModeForTests` methods
used by the unit tests to fake the appearance of a conpty connection,
and I just needed to add some additional state in one of those methods
to trigger the correct `InConptyMode` response.
Closes#12206
The atlas engine currently applies colors and flags (underline,
overline, ...) based on the first column in a glyph; this means that
every member of a ligature is drawn in the same color with the same
underline style.
This commit makes us look up cell color and flags based on the actual
buffer column it represents, so that ligatures can be printed in
multiple colors and with different underline styles.
## Summary of the Pull Request
This PR sets up a OneFuzz pipeline on Azure DevOps for our repo.
## Detailed Description of the Pull Request / Additional comments
- fuzz.yml: defines the stages and pipeline for ADO
- build-console-fuzzing: builds the solution in the Fuzzing configuration
- build-console-steps: omits a few tasks that are unnecessary for this build configuration
- sln and vcxproj changes: the solution wasn't building in CI. This makes sure that's fixed.
- fuzzing.md: a short guide on how to get OneFuzz set up and add a new fuzzer
## References
#7638
[Git2Git] Merged PR 6814613: conhost FT: skip a test that fails on OneCore
Fixes MSFT-33720056
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 6410311eee21e9ce147464af89d35f3569d4d2b9
## Summary of the Pull Request
Disables the automatic adjustment of indistinguishable text (added in #11095) because of the concerns brought up in #11917. Also, the setting is hidden in the SUI for as long as this feature remains disabled.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
Prevents a potential null pointer crash in the export buffer action.
## PR Checklist
* [x] Closes#12170
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Manually tested.
This commit replaces the console lock was replaced with a fair ticket
lock implementation, as only fair locks guarantee us that the renderer
(or other parts) can acquire the lock, once the VT parser has finally
released it.
This is related to #11794.
## Validation Steps Performed
* No obvious crashes ✅
* No text/VT performance regression ✅
* Cursor blinker starts/stops on focus/defocus of the window ✅
## Summary of the Pull Request
This PR moves the color table and related render settings, which are common to both conhost and Windows Terminal, into a shared class that can be accessed directly from the renderer. This avoids the overhead of having to look up these properties via the `IRenderData` interface, which relies on inefficient virtual function calls.
This also introduces the concept of color aliases, which determine the position in the color table that colors like the default foreground and background are stored. This allows the option of mapping them to one of the standard 16 colors, or to have their own separate table entries.
## References
This is a continuation of the color table refactoring started in #11602 and #11784. The color alias functionality is a prerequisite for supporting a default bold color as proposed in #11939. The color aliases could also be a way for us to replace the PowerShell color quirk for #6807.
## PR Checklist
* [x] Closes#12002
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
In addition to the color table, this new `RenderSettings` class manages the blinking state, the code for adjusting indistinguishable colors, and various boolean properties used in the color calculations. These boolean properties are now stored in a `til::enumset` so they can all be managed through a single `SetRenderMode` API, and easily extended with additional modes that we're likely to need in the future.
In Windows Terminal we have an instance of `RenderSettings` stored in the `Terminal` class, and in conhost it's stored in the `Settings` class. In both cases, a reference to this class is passed to the `Renderer` constructor, so it now has direct access to that data. The renderer can then pass that reference to the render engines where it's needed in the `UpdateDrawingBrushes` method.
This means the renderer no longer needs the `IRenderData` interface to access the `GetAttributeColors`, `GetCursorColor`, or `IsScreenReversed` methods, so those have now been removed. We still need access to `GetAttributeColors` in certain accessibility code, though, so I've kept that method in the `IUIAData` interface, but the implementation just forwards to the `RenderSettings` class.
The implementation of the `RenderSettings::GetAttributeColors` method is loosely based on the original `Terminal` code, only the `CalculateRgbColors` call has now been incorporated directly into the code. This let us deduplicate some bits that were previously repeated in the section for adjusting indistinguishable colors. The last steps, where we calculate the alpha components, have now been split in to a separate `GetAttributeColorsWithAlpha` method, since that's typically not needed.
## Validation Steps Performed
There were quite a lot changes needed in the unit tests, but they're mostly straightforward replacements of one method call with another.
In the `TextAttributeTests`, where we were previously testing the `CalculateRgbColors` method, we're now running those tests though `RenderSettings::GetAttributeColors`, which incorporates the same functionality. The only complication is when testing the `IntenseIsBright` option, that needs to be set with an additional `SetRenderMode` call where previously it was just a parameter on `CalculateRgbColors`.
In the `ScreenBufferTests` and `TextBufferTests`, calls to `LookupAttributeColors` have again been replaced by the `RenderSettings::GetAttributeColors` method, which serves the same purpose, and calls to `IsScreenReversed` have been replaced with an appropriate `GetRenderMode` call. In the `VtRendererTests`, all the calls to `UpdateDrawingBrushes` now just need to be passed a reference to a `RenderSettings` instance.
This commit makes the following changes to `til::point/size/rectangle`
for the following reasons:
* Rename `rectangle` into `rect`
This will make the naming consistent with a later `small_rect` struct
as well as the existing Win32 POINT/SIZE/RECT structs.
* Standardizes til wrappers on `int32_t` instead of `ptrdiff_t`
Provides a consistent behavior between x86 and x64, preventing accidental
errors on x86, as it's less rigorously tested than x64. Additionally it
improves interop with MIDL3 which only supports fixed width integer types.
* Standardizes til wrappers on throwing `gsl::narrow_error`
Makes the behavior of our code more consistent.
* Makes all eligible functions `constexpr`
Because why not.
* Removes implicit constructors and conversion operators
This is a complex and controversial topic. My reasons are: You can't Ctrl+F
for an implicit conversion. This breaks most non-IDE engines, like the one on
GitHub or those we have internally at MS. This is important for me as these
implicit conversion operators aren't cost free. Narrowing integers itself,
as well as the boundary checks that need to be done have a certain,
fixed overhead each time. Additionally the lack of noexcept prevents
many advanced compiler optimizations. Removing their use entirely
drops conhost's code segment size by around ~6.5%.
## References
Preliminary work for #4015.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
I'm mostly relying on our unit tests here. Both OpenConsole and WT appear to work fine.
In previous releases, we had the commandlines for the Command Prompt and PowerShell profiles unqualified, as `cmd.exe` and `powershell.exe`. This was bad - theoretically, that would have preferred the cmd that was in the CWD over the one in System32. Or, something could insert itself into the path, and you'd end up with a malicious `cmd.exe` before the real one.
In #11437, we made sure that the `userDefaults` are initiated with the fully qualified paths. However, that didn't fix the issue for folks who already had settings files.
In an effort to better prevent this kind of badness, if we see a profile _with a default profile guid_, AND the unqualified version of the path, then we'll stealth replace it with the fully qualified one.
* Related to #11437
* [x] fixes#12126
* [x] Tests added
Adds an action which can be used to change the opacity at runtime. This is a follow up to some of the other work I had been doing around opacity and settings previewing at the end of the year.
> edit: pseudo-spec
>
> * `adjustOpacity`:
> * `"opacity"`: (**required**) an integer number to set the opacity to.
> * `"relative"`: (defaults to `true`)
> * If false, set the opacity to the given value, which should be between [0, 100].
> * If true, then use `opacity` as a relative adjustment to the current opacity. So the implementation would get the current opacity for this pane, then add this action's opacity to that value. Should be between [-100, 100]
>
> This would allow both setting exactly 25% opacity with an action, and binding an action that increases/decreases the opacity one {amount}
It's preview-able too, which is neat.
* [x] Closes#11205
* [x] I work here
* [x] Docs updated: https://github.com/MicrosoftDocs/terminal/pull/477
When I added these macros in #11619, the real purpose was to make sure we don't forget to add new settings to these test mocks as well. However, I totally forgot to convert those. I guess that happens with a 1300 line diff ¯\\\_(ツ)_/¯
* [x] Is a codehealth thing
* [x] I work here
* [x] tests still pass
This was a simple oversight. No user profile ever has `connectionType` set, because why would they. So even for the Azure Shell, which needed this, the check would fail and we'd forget to duplicate the connectionType to the new profile.
* [x] I work here
* [x] Closes#12120
* [x] Tested manually
Title says it all. This is on by default, and we've committed to keeping it around. Having a velocity flag for it is redundant now.
* [x] Closes#11454
* [x] I work here
This adds an action for the context menu entry we added in #11062. That PR added support for exporting the buffer, exclusively through the tab item's context menu. This adds an action that can additionally be bound, which also can export the buffer to a file. This action accepts a `path` param. If empty/ommitted, then the Terminal will prompt for the file to export the buffer to.
* Does a part of #9700
* Spec in #11090, but I doubt this is contentious
* [x] This will satisfy #12052
* [x] I work here
* [x] docs added: https://github.com/MicrosoftDocs/terminal/pull/479
## Summary of the Pull Request
This is the resurrection of #8514 and #11310. WE determined that we didn't want to do #11308 after all, so this should be profile auto-elevation, without the warning.
This PR adds two features:
* the `elevate: bool` property to profiles
- If the user is running unelevated, **and** `elevate` is set to `true`, then instead of opening a new tab, we'll open an elevated Terminal window with the profile.
- Otherwise, we'll just open a new tab in the existing window. This includes cases where the window is elevated, and the profile is set to `elevate:false`. `elevate:false` basically just means "do nothing special with me".
* the `elevate: bool?` property to `NewTerminalArgs` (`newTab`, `splitPane`)
- This allows a user to create an action that will elevate the profile, even if the profile is not otherwise set to auto-elevate.
- `elevate:null` (_the default_) does not change the profile's elevation status. The action will use whatever is set by the profile.
- `elevate:true` will attempt to auto-elevate the profile
- `elevate:false` will do nothing special.
## References
* #5000 for obvious reasons
* Spec'd in #8455
## PR Checklist
* [x] Closes#632
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - sure does, but that'll come all at the end.
## Detailed Description of the Pull Request / Additional comments
After playing with de-elevation a bit, it turns out it behaves weirdly with packaged applications. I can try and ask `explorer.exe` to launch the process on our behalf. However, if the thing we're launching is an execution alias (`wt.exe`), and we're elevated, then the child process will _still launch elevated_.
There's also something super BODGEY at work here. `ShellExecute` is the function we use to ask the OS to elevate something for us. But `ShellExecute` needs to be able to send a window message to the process that called it (if the caller was a WINDOWS subsystem application). So if we die immediately after calling `ShellExecute`, then the elevated process never actually spawns - sad. So we're adding a helper process, `elevate-shim.exe`, that lives in our process. That'll be the one that actually calls `ShellExecute`, so that it can live for the duration of the UAC prompt.
## Validation Steps Performed
* Ran tests
* Opened a bunch of terminal tabs at various different elevation levels
* opened new splits too
* In the defaults (base layer) as well, for madness
Some settings to use for testing
<details>
```jsonc
"keybindings" :
[
////////// ELEVATION ///////////////
{ "keys": "f1", "name": "ELEVATED TAB", "icon": "\uEA18", "command": { "action": "newTab", "elevate": true } },
{ "keys": "f2", "name": "ELEVATED, Color", "icon": "\uEA18", "command": {
"action": "newTab", "elevate": true, "commandline": "PowerShell.exe", "startingDirectory": "C:\\Windows", "tabColor": "#bbaa00"
} },
{ "keys": "f3", "name": "unelevated ELEVATED", "icon": "🙃", "command": {
"action": "newTab", "elevate": false, "profile": "elevated cmd"
} },
//////////////////////////////
],
"profiles":
{
"defaults":
{
"elevate": true,
},
"list":
[
{
"hidden":false,
"name" : "cmd",
"commandline" : "cmd.exe",
"guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
"startingDirectory" : "%USERPROFILE%",
"opacity" : 20
},
{
"name" : "the COOLER cmd",
"commandline" : "c:\\windows\\system32\\cmd.exe",
"startingDirectory" : "%USERPROFILE%",
},
{
"name" : "the sneaky cmd",
"commandline" : "c:\\windows\\system32\\cmd.exe /k echo sneaky sneaks",
"startingDirectory" : "%USERPROFILE%",
},
{
"name": "elevated cmd",
"commandline": "cmd.exe /k echo This profile is always elevated",
"startingDirectory" : "well this is garbage",
"elevate": true,
"background": "#9C1C0C",
"tabColor": "#9C1C0C",
"colorScheme": "Desert"
},
{
"name": "unelevated cmd",
"commandline": "cmd.exe /k echo This profile is just as elevated as you started with",
"elevate": false,
"background": "#1C0C9C",
"tabColor": "#1C0C9C",
"colorScheme": "DotGov",
"useAcrylic": true
},
]
```
</details>
Also try:
* `wtd nt -p "elevated cmd" ; sp -p "elevated cmd"`
* `wtd nt -p "elevated cmd" ; nt -p "elevated cmd"`
This was merged manually via
```
git diff dev/migrie/f/non-terminal-content-elevation-warning dev/migrie/f/632-on-warning-dialog > ..\632.patch
git apply ..\632.patch --ignore-whitespace --reject
```
Revert "Fix environment block creation (#7401)"
This reverts commit 7886f16714.
(cherry picked from commit e46ba65665)
Revert "Always create a new environment block before we spawn a process (#7243)"
This reverts commit 849243af99.
(cherry picked from commit 4204d2535c)
(cherry picked from commit f8e8572c23)
(cherry picked from commit cb4c4f7b73)
(cherry picked from commit afb0cac3e3)
(cherry picked from commit b25dc74a1d)
(cherry picked from commit 5f7c66bc0c)
Fixes#7418
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- add suport for light backgrounds
- make color tool use 90-97 and 100-107 sequences for fg/bg
- fix loops stop condition
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
additional improvements that I've seen while working on #12087
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This commit fixes the compilation under VS 2022.1 and clang, by evaluating a
`static_assert(false)` safety check only when the template is instantiated.
This is achieved by making the assertion depend on the template parameter.
## Validation Steps Performed
* Host.EXE compiles under VS 17.1.0 Preview 3.0 (32110.40.d17.1) ✅
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add an action to restore the last closed pane or tab. When all you have is restoring last sessions everything looks like a `std::vector<ActionAndArgs>`.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#9800
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Partially closes#960
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
- Keep a buffer of panes/tabs that were closed recently in the form of a list
of actions to remake it.
- To restore the pane or tab just run the list of actions.
- This (deliberately) does not restore the exact visual state as focus could
have changed / new panes might have been created in the mean time. Mostly
this means that restoring a pane will just attach to the currently focused
pane instead of whatever its old neighbor was.
- Buffer is limited to 100 entries which might as well be "infinite" by most reasonable
standards, but prevents complaints about there being memory leaks in long running
instances.
- The action name could be potentially changed, but it felt unwieldy as "restoreLastClosedPaneOrTab".
- This does not handle restoring the actual running contents of a pane.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Colortool: add support for truecolor fg/bg and cursor
## PR Checklist
* [x] Closes#1160
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
- add support to RGB values in FOREGROUND/BACKGROUND keys of ini colorschemes.
- add support to parse and change cursor color
- add support for true rgb fg/bg to colortool, will only work for vt and default console as there's no way to set rgb values through the win api.
- this pr does not add support for exporting an colorscheme with rgb fg/bg
- this is my first time using C# so any feedback is appreciated.
## Validation Steps Performed
manual testing
This PR does two things, which are best viewed as atomic commits:
* e64ae7d: Move the `MangleStartingDirectoryForWSL` to `types/utils`. It doesn't _really_ make sense in `types`, since it's only really being used in a single place in TerminalConnection. However, TerminalConnection doesn't have tests, and types does. So this commit move the function there, and adds tests from #9223 to the types tests.
* 42036c5: This actually fixes the bug in #11994. Unfortunately, `wsl --cd` will try to treat paths starting with `//wsl$` as a linux-relative path, when the user almost certainly wanted a windows-relative one. So we'll mangle that back into a path that looks like `\\wsl$\foo\bar`.
* [x] closes#11994
* [x] I work here
* [x] tests added 🎉
As discussed. We're not going to be able to consistently get bugfixes below Vb anymore, so let's leave that as the MinVersion, so we can start adding features that depend on those bugfixes.
* [x] Closes#11371
I'm not 100% sure that this is the right solution, but it does seem to work well enough. This is unfortunately a classic heisenbug. It was already hard enough to repro originally, but attaching a debugger made it totally impossible to hit.
My theory is that it's possible for the GotFocus event to fire before the LayoutUpdated event does. If that were to occur, then we'd try to turn on the cursor timer before it exists, gracefully do nothing, then create the timer. In that case, we'd never get a subsequent message to start the blinking.
I tested that theory by just initializing the cursor blinker to our `_focused` state. In that case, if the control has already been focused at the time of the LayoutUpdated event, then we can init the cursor to the correct state. Testing that out, I couldn't once get this to repro, which makes me think this works. I've opened some 900 (<sup>hyperbole</sup>) tabs now, so I'm pretty confident I'd have seen it by now.
* Regressed in #10978
* [x] fixes#11411
* [x] I made sure I didn't regress #6586
* [x] I work here
This commit adds additional information to the persisted window layouts.
- Runtime tab titles
- Focus, Maximized, and Fullscreen modes.
Also,
- Adds actions for Set{Focus,FullScreen} that take a boolean
to work in addition to the current Toggle{Focus, Fullscreen} actions.
- Adds SetMaximized that takes a boolean.
This adds the capability to maximize (resp restore) a window using
standard terminal actions.
This also involves hooking up a good amount of state tracking between
the terminal page and the window to see when maximize state has changed
so that it can be persisted.
- These actions are not added to the default settings, but they could be.
The intention is that they could assist with automation (and was originally)
how I planned on persisting the state instead of augmenting the LaunchMode.
- The fullscreen/maximized saving isn't perfect because we don't have a
way to save the non-maximized/fullscreen size, so exiting the modes
won't restore whatever the previous size was.
References #9800Closes#11878Closes#11426
This PR makes sure profile appearances in SUI set both focused and unfocused members of the control. I totally forgot about the fact that the control is _unfocused_ in the SUI. Verified manually, I didn't think it deserved a gif.
* regressed in #11619
* Closes#11893
* I work here
This commit removes some pure virtual base classes from conhost,
found with the help of SizeBench. This reduces binary size by 5kB.
The reduction in code size however is the main benefit of this.
Additionally this fixes a mysterious, undebuggable crash in
~RenderThread(), caused by a Control Flow Guard failure when
the class was destroyed over its IRenderThread interface.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Printing text works ✅
* Printing VT works ✅
* Performance is alright ✅
When editing colors in the conhost properties dialog, and you select an
item to update (e.g. Screen Text, or Screen Background), the associated
color swatch for that item would be highlighted, but the RGB color
values weren't updated to reflect that selection. This PR fixes it so
the RGB values are now correctly refreshed.
I just copied the three lines used up update the color value fields from
the code that handles changes to the color swatch selection. I didn't
think it was worth pulling those three lines out into a separate
function.
## Validation Steps Performed
I've manually verified that the RGB values are now refreshed correctly
when selecting a color item to update.
Closes#1220
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- Settings > Add a new profile
- Disable "Duplicate" button until a profile is selected
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Should take care of #12056, once we can get a build to the a11y team (MAINTAINER EDIT: we unfortunately can't just say "closes #foo" for issues like this one, we need another team to validate the following build.)
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
Adds a per-profile setting for setting the audio sound for the bell. The setting is `bellSound`, it accepts a path. We'll use the file at that path as the sound for the bell. If it doesn't exist, then oh well, so sound for you.
It'll also secretly accept an array of paths. If you provide an array, it will pick one at random.
## PR Checklist
* [x] Closes#8366
* [x] I work here
* [ ] Tests - lol this is the hackathon, I'm just messing around
* [ ] Requires documentation to be updated
## Validation Steps Performed
I'm not suggesting that anyone go to [this post](https://www.reddit.com/r/untitledgoosegame/comments/d77le4/honk_ringtones/) and download a zip full of `honk.mp3`s. I'm definitely not suggesting you add it to your settings like
```jsonc
"bellSound": [
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk1.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk2.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk3.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk4.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk-muffled1.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk-muffled2.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk-muffled3.mp3"
]
```
No, don't do that.
https://user-images.githubusercontent.com/18356694/137389503-91e43dba-8f7b-4078-9d35-23ceb2ac9432.mp4
* [x] It surprisingly works elevated
* [x] We should probably accept env vars in these paths
* [x] We may only want one `MediaPlayer` per terminal, rather than one per pane
* [ ] We may want to validate the paths, and discard ones that don't exist.
* [x] alternatively, _meh_
Enables a series of tasks run against our release pipeline that validate the security and compliance status of our code in an automated fashion. These checks include:
- Component Governance - (we had this one, it was moved to here) - Inventories open-source components used in our build
- PREfast - C/C++ static analysis for common code errors and exploits
- Policheck - Searches source code, comments, and text for words that could be sensitive legally, culturally, or geopolitically
- Credscan - Looks for credentials left behind in the code/documents and build output files
- BinSkim - Searches for common vulnerabilities in binaries
- CheckCFlags - Validates that compile/link flags match the policies recommended by Windows engineering for inclusion into the OS product image
- CFGCheck/XFGCheck - Validates that the CFG and/or XFG settings were enabled at compile and link time to guard against control flow attacks.
We're also required to run the SBOM one, but that was done in a separate PR and we're still pending the detectors being updated.
## References
- #11948 - Move from CFG to XFG once XFG task folks get back to me on it
- #11949 - Enable bug filing for SecComp tasks
- #11950 - Bulk process bugs filed by SecComp tasks
- #11947 - Validate SBOM when checkers come online
## Checklist
- [x] - Fixes#10735
- [x] - Fixes#908
- [x] - I work here
- [x] - If it fits, it sits.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
fix#11432
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11432
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
compiled and verified that "\~" , "/usr/bin" , "~/.config" and "/" as stating directory didn't get relative path resolve
verified that '.' did
Ensures the PowerShell Core profile's commandline is quoted. This allows
the profile to work correctly if there are files in place on the machine
(e.g. one called `C:\Program`) that prevent `CreateProcess()` from
invoking the un-quoted commandline.
## Validation Steps Performed
Created a file called `C:\Program` and opened the PowerShell profile in
terminal.
Closes#11717
Adds the Ansi-Color tool, completing #6470.
What started out as an experiment to see the support of ANSI support to
conhost, I wanted to write a Windows equivalent of Daniel Crisman's
[BASH script on tldp.org]. I didn't like how the BASH script hard coded
in whitespace and I thought Windows could do better. I applied
techniques to speed up the execution and tried to use the Command Script
batch language in ways that pushed the limits for what I thought it
could do. Running this from withing PowerShell, `&cmd /c ansi-color.cmd`,
I found out that the active code page is already 65001, but when ran
from a Command Prompt, the active code page depends on the regional
settings and I would have a dependency on CHCP to detect the active code
page, change to 65001 if necessary, and restore the previous code page
after running. I found it useful for designing color schemes and writing
shaders, and I started using an earlier version for logging bugs.
Initially it was a single script which I would dump every SGR
combination I could think of, and many which weren't implemented yet,
but as I was looking at other tools which had been written I wanted to
mimic the same output so I could do side-by-side comparisons. First I
wrote `crisman.def` and then `colortool.def`. So I had to align text.
Then output was slow for big tables so I wrote to an outbuffer and made
use of macros. I wanted to handle flags instead of needing to change
settings every time, so I added argument parsing and loading external
files.
It's a batch file that has some really useful purposes and does nothing
I've seen before.
I've ran every definition in a Command Prompt, with CP 437 and CP 65001
to make sure it works. Posted as a Gist on my account for about year, a
Portuguese (Brazilian as I recall), speaking user tried the Gist and it
was failing because CHCP is localized. I've taken an approach to try and
make it work for different localizations, but this is a potential
problem. I also ran every definition in PowerShell 7, shelling down to
`cmd` to actually run it. Lastly, I went through using the flags and
made sure that help would be shown. Error messages generate error levels
when the script exits, so those could be used to use this in an
automated test and catch if there was a problem with the script
executing. It won't be able to validate if the generated output shows
correctly, but it would fail if a definition file is missing or if it
needed to switch to Unicode and wasn't flagged or configured to do so.
For trying to build the table stub and headers, there is some debug code
which will output what was parsed. This is the last debug code in the
script itself, but I found it to be useful at times, so there is a
configuration setting which can turn that debug output back on.
Technically there is also a debug statement to break after adding the
macros and parsing the arguments, but before it does any configuration
changes, changes the code page, or anything. This was useful for making
changes to macros and being able to test them as well as making sure
that flags and arguments are parsed correctly. It was a rather cryptic
discovery to call `cmd /c exit -1073741510` to break out, so in part
that was my reason to leave this in. The definition files themselves
could be cleaned up further, but in both of them there are a lot of
Unicode codepoints that could be useful when defining division lines for
the headers so I opted to just comment them out. I initially had the
default definition to require Unicode, but now it just changes to a
non-Unicode output if it can't. And this brings up the last concern. The
way certain settings are set, is that they are defined in the
`__TABLE__` section of the definition file. With `PARSE_TABLE_DATA`,
the script looks line by line for `SET *` or `IF *` and if found it will
effectively eval that line. The definition files are written so that for
instance `SET "CELL= gYw "` could be used to set the code which is used.
`If` was allow so that there could be a test if Unicode were available
and set something different for ASCII and Unicode. But it also opens the
possibility that a rogue actor could create a `ansi-color.cmd`
definition file something like `SET "foo=bar" & DoSomethingBad.exe`.
First of all I'd be flattered that anyone would use this very niche
tool, but it is something I think which needs to be called out.
Essentially the definition files are just batch files, but they are
extremely limited to executing only one line at a time and only
supporting IF and SET commands. I think this is a minimal risk because
at that point batch files would already be more effective, but there
should also be an expectation that a batch file will run something and
the same may not be true for the heavily degraded definition files. I
think the risk is minimal but it is a risk I wanted to make clear. This
really showcases some interesting techniques and ideas, and I hope that
it is useful. All told, there are a couple years of incremental changes
in this PR.
Closes#6470
[BASH script on tldp.org]: https://tldp.org/HOWTO/Bash-Prompt-HOWTO/x329.html
The `IRenderData::GetDefaultBrushColors` method was intended to return
the default attributes from which the renderer would calculate the
default background color. It should always have been returning a default
`TextAttribute` object, but the conhost `RenderData` implementation was
mistakenly returning the active attributes instead. This resulted in
margin areas being filled with the wrong color. To correct that, this PR
simply replaces all usage of `GetDefaultBrushColors` with hardcoded
default attributes.
## Validation Steps Performed
I've manually checked the test case described in issue #11976 and
confirmed that the conhost margin areas are now correctly filled with
the default background color.
Closes#11976
When copying content from the terminal to the clipboard (with
formatting), a default background color needs to be set to fill the
unused area of the pasted block. Prior to this PR, that color was not
correctly set, so the pasted content did not match what was seen on
screen.
Windows Terminal previously used the default background from the initial
color scheme, so it didn't take palette changes into account.
OpenConsole did use the active default color, but didn't take the
reverse screen mode into account, so could end up using the foreground
rather than the background color.
In both case I've changed the code to lookup the runtime colors in the
same way that renderer does, so they should now match what is seen on
screen.
## Validation Steps Performed
I've manually confirmed that the background color is now correctly set
when copying from both Windows Terminal and OpenConsole.
Closes#11988
## Summary of the Pull Request
When a conhost window is resized, the cursor is temporarily hidden, and the visibility is restored when the resize is finished. However, it wasn't taking into account that the cursor may already have been hidden to start with, in which case it would mistakenly force the cursor to be visible. This PR now saves the initial state of the visibility, so it can be correctly restored.
## PR Checklist
* [x] Closes#12024
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I've manually verified that this fixes the issue, and the cursor is no longer forced to be visible when the window is resized.
Only look for PGO package if build mode targeted; add packages.config dependency to ease restoration
## PR Checklist
* [x] Closes#11978
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Test of restore and build on fresh repo copy passed.
This PR attempts to minimize the amount of fiddling we do with the alpha
color components, by storing all colors with a zero alpha (the default
for `COLORREF` values) and then leaving it up to the renderer to adjust
the final alpha value as required (which it was already doing anyway).
This gets rid of the `argb.h` header file, which was originally being
used to produce `COLORREF` values with custom alpha components, and thus
is no longer required. Anywhere that was using the `ARGB` macro is now
using a standard `RGB` macro with a 0 alpha.
The `Utils::SetColorTableAlpha` method has also been removed, since that
was only really used to force an alpha of 255 on all the color table
entries, which isn't necessary.
There were also a number of places where we were using
`til::color::with_alpha`, to switch alpha components back and forth
between 0 and 255, which have now been removed. Some of these were
essentially noops, because the `til::color` class already applied the
appropriate alpha changes when converting from or to a `COLORREF`.
I've manually run a few attribute rendering tests to check that the
colors were still working correctly, and the default background color is
appropriately transparent when in acrylic mode.
Closes#11885
To unify with WinUI, we're going to share an engineering component of this particular NuGet package full of scripts and utilities to make PGOing things easier.
This basically removes all of the scripts that I ~blatantly stole~ copied from https://github.com/microsoft/microsoft-ui-xaml and moves to the NuGet package that the team generates instead. A bunch of build things had to be massaged to make it work in our pipeline.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Properly handle UTF-16 surrogates when calculating the position of matched pattern.
Fix#8709
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
b88ffb21b0/src/buffer/out/search.cpp (L335-L339)
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#8709
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
use `Utf16Parser::Parse` to handle code points from U+010000 to U+10FFFF in UTF-16.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
also the case by @mas90 https://github.com/microsoft/terminal/issues/8709#issuecomment-884915485:
Microsoft will be providing a Software Bill of Materials for our products. This onboards the Windows Terminal product to the common engineering system task that can scavenge for this information within our build project (already recorded for internal compliance reasons) and present it in a machine-readable interchange format.
See also: https://devblogs.microsoft.com/engineering-at-microsoft/generating-software-bills-of-materials-sboms-with-spdx-at-microsoft/
This does not yet include packaging and distributing the SBOM with our final packages. We are waiting for that tooling to come online for MSIX. Guidance is "Coming Soon™️."
## References
- https://github.com/microsoft/dropvalidator/issues/216 - `cgmanifest.json` are not being pulled in yet, but I've been told internally this will fix it. I will double-check when I hear back on this issue.
## PR Checklist
* [x] Closes#11810
* [x] I work here
* [x] I ran it and I see the manifest generated.
00fe2b0 made the mistake of hashing the pointer of `NewTerminalArgs` instances
instead of their content. This commit calls `NewTerminalArgs::Hash` instead.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* New test passes ✅
Some changes I had sitting around after working on #11153 that weren't
appropriate to put in that pr. Each commit should be independent if
particular ones are unwanted.
Slight overlap with #11305. There is some more code removal that can be
done after that is merged, specifically `AttachPane` can be deleted once
`SplitPane` handles adding multiple panes at once correctly.
## Details
- Makes `WalkTree` more useful, and closer to a real iterator. Add a
convenient `_FindPane` built on top of that.
- Coalesces `PrecalculateAutoSplit` and `PreCalculateCanSplit` since
they are basically identical logic.
- `Pane::Relayout` functionally did nothing because sizing was switched
to `star` sizing at some point in the past, so it was just deleted.
## Validation
Quick smoke test to make sure automatic splitting works, focus movement
still works correctly.
This commit enables /permissive- for all projects, as well as all other /Zc
flags not enabled by default by /permissive-. Some projects continue to be
built under /Zc:twoPhase- as JsonUtils.h fails to compile otherwise.
## PR Checklist
* [x] Closes#10703
* [x] I work here
* [x] Tests added/passed
## Summary of the Pull Request
Cleans up `ProfileViewModel`, `Profiles`, and `ProfilePageNavigationState` to move all of the view model responsibilities over to `ProfileViewModel`. We don't actually store the `ProfilePageNavigationState` anymore. We only use it as a way to transfer information to the new page.
## References
#9207 - Apply MVVM
## Detailed Description of the Pull Request / Additional comments
- I pulled out `ProfileViewModel` into its own file to keep things cleaner. It was getting pretty big.
- The font lists are now stored in a static location in `ProfileViewModel`, which means that we can reuse the same list between pages.
- the profile pivot was also moved to the `ProfileViewModel` and stored as a static value.
## Validation Steps Performed
✅ pivot behavior is the same
✅ font list is still populated
This commit serves two purposes:
* Simplify construction of hashes for non-trivial structs
This is especially helpful for ActionArgs
* Improve hash quality by not needlessly throwing away entropy
`til::hasher` is modeled after Rust's `std::hash::Hasher` and works similar.
The idea is simple: A stateful hash function can hash multiple unrelated fields,
without loosing entropy by running a finalizer after hashing each interim field.
This is especially useful for modern hash functions, which often have a wider
internal state than the output width. Additionally this improves performance
for hash functions with complex finalizers.
Most of this is of course a bit moot right now, considering that `til::hasher`
is still based on STL's FNV1a algorithm, which offers a very poor hash quality.
But counterintuitively, FNV1a actually benefits most from this PR: Since it
lacks a finalizer entirely, this commit greatly improves hash quality as
it encodes more data into FNV's state and thus improves randomness.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* No unusual behavior ✅
## Summary of the Pull Request
This replaces the `std::bitset` for the `SgrSaveRestoreStackOptions` enum with a `til::enumset` type, thus avoiding the need to cast the `enum` to a `size_t` every time a value is set or tested.
This also fixes an issue with the handling of omitted and zero parameters in the `XTPUSHSGR` sequence, which are meant to be ignored, and not interpreted as "all".
## PR Checklist
* [x] Closes#11879
* [x] Closes#11883
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
In addition to dropping all the `static_cast` operations, the use of the `til::enumset` also allowed us to get rid of the `try`/`catch` handling that was previously required in a couple of places, since the `til::enumset` operations don't throw.
And to fix the zero parameter handling, we just needed to add an additional lower bound when validating that options are in range - if an option is 0 (`All`), it will now just be ignored.
## Validation Steps Performed
The updated code still passes the existing unit tests, and I've manually confirmed that it fixes the test case for omitted and zero parameters from issue #11883.
* Adds the `cppwinrt_utils.h` to the include path for all winrt projects.
* Adds the file to the pch.h's for every project, so you don't need to include it in every header.
* Replaces some usages of `DECLARE_EVENT`/`DEFINE_EVENT` with `WINRT_CALLBACK`, which will do it in a oneliner
* Adds more `BASIC_FACTORY` usage.
* [x] Closes#2456
It's 92 files with one-line changes, don't be scared.
This adds x-macros for each of the actions, greatly reducing the amount of boilerplate needed for each action args.
Originally, I wanted to do more with this, but I think the x-macros we've discovered properly treads the line of ease-of-use and native c++ support, with how much it'll do for us
* [x] Closes#3475
* [x] Sure enough, the tests still pass.
* [ ] mmmmmmm 
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Clean up an invalid access that I introduced in #11440
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11684
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
This PR gets rids of the unused `RendererTests.cpp` file and removes
the `Renderer::s_CreateInstance` method declarations that were only
ever reference from that file, and weren't actually defined anywhere.
## PR Checklist
* [x] Closes#11870
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've not discussed this with core contributors already.
## Validation Steps Performed
Compiled the solution and ran the tests - everything still worked.
We have been advised to give not only the PDB paths, but paths to the EXE and DLL files we produce, to the PublishSymbols build task. We are assured by our engineering systems teams that enlightening the task to all of this information helps it hook things up better somewhere between our build machine and the symbol server such that debugging is more robust, especially around thrown exception stacks.
## PR Checklist
* [x] Closes#11737 - main fix for feeding EXEs and DLLs into the symbol publisher
* [x] Closes#11860 - bonus fix because I noticed the PDB source linking wasn't working
* [x] I work here.
* [x] If it fits, it sits.
## Summary of the Pull Request
Currently, the TermControl and ControlCore recieve a settings object that implements `IControlSettings`. They use for this for both reading the settings they should use, and also storing some runtime overrides to those settings (namely, `Opacity`). The object they recieve currently is a `T.S.M.TerminalSettings` object, as well as another `TerminalSettings` object if the user wants to have an `unfocusedAppearance`. All these are all hosted in the same process, so everything is fine and dandy.
With the upcoming move to having the Terminal split into multiple processes, this will no longer work. If the `ControlCore` in the Content Process is given a pointer to a `TerminalSettings` in a certain Window Process, and that control is subsequently moved to another window, then there's no guarantee that the original `TerminalSettings` object continues to exist. In this scenario, when window 1 is closed, now the Core is unable to read any settings, because the process that owned that object no longer exists.
The solution to this issue is to have the `ControlCore`'s own their own copy of the settings they were created with. that way, they can be confident those settings will always exist. Enter `ControlSettings`, a dumb struct for just storing all the contents of the Settings. I used x-macros for this, so that we don't need to copy-paste into this file every time we add a setting.
Changing this has all sorts of other fallout effects:
* Previewing a scheme/anything is a tad bit more annoying. Before, we could just sneak the previewed scheme into a `TerminalSettings` that lived between the settings we created the control with, and the settings they were actually using, and it would _just work_. Even explaining that here, it sounds like magic, because it was. However, now, the TermControl can't use a layered `TerminalSettings` for the settings anymore. Now we need to actually read out the current color table, and set the whole scheme when we change it. So now there's also a `Microsoft.Terminal.Core.Scheme` _struct_ for holding that data.
- Why a `struct`? Because that will go across the process boundary as a blob, rather than as a pointer to an object in the other process. That way we can transit the whole struct from window to core safely.
* A TermControl doesn't have a `IControlSettings` at all anymore - it initalizes itself via the settings in the `Core`. This will be useful for tear-out, when we need to have the `TermControl` initialize itself from just a `ControlCore`, without being able to rebuild the settings from scratch.
* The `TabTests` that were written under the assumption that the Control had a layered `TerminalSettings` obviously broke, as they were designed to. They've been modified to reflect the new reality.
* When we initialize the Control, we give it the settings and the `UnfocusedAppearance` all at once. If we don't give it an `unfocusedAppearance`, it will just use the focused appearance as the unfocused appearance.
* The Control no longer can _write_ settings to the `ControlSettings`. We don't want to be storing things in there. Pretty much everything we set in the control, we store somewhere other than in the settings object itself. However, `opacity` and `useAcrylic`, we need to store in a handy new `RUNTIME_SETTING` property. We can write those runtime overrides to those properties.
* We no longer store the color scheme for a pane in the persisted state. I'm tracking that in #9800. I don't think it's too hard to add back, but I wanted this in front of eyes sooner than later.
## References
* #1256
* #5000
* #9794 has the scheme previewing in it.
* #9818 is WAY more possible now.
## PR Checklist
* [x] Surprisingly there wasn't ever a card or issue for this one. This was only ever a bullet point in #5000.
* A bunch of these issues were fixed along the way, though I never intended to fix them:
* [x] Closes#11571
* [x] Closes#11586
* [x] Closes#7219
* [x] Closes#11067
* [x] I think #11623 actually ended up resolving this one, but I'm double tapping on it here: Closes#5703
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Along the way I tried to clean up code where possible, but not too agressively.
I didn't end up converting the various `MockTerminalSettings` classes used in tests to the x macros quite yet. I wanted to merge this with #11416 in `main` before I went too crazy.
## Validation Steps Performed
* [x] Scheme previewing works
* [x] Adjusting the font size works
* [x] focused/unfocused appearances still work
* [x] mouse-wheeling opacity still works
* [x] acrylic & cleartype still does the right thing
* [x] saving the settings still works
* [x] going wild on sliding the opacity slider in the settings doesn't crash the terminal
* [x] toggling retro effects with a keybinding still works
* [x] toggling retro effects with the command palette works
* [x] The matrix of (`useAcrylic(true,false)`)x(`opacity(50,100)`)x(`antialiasingMode(cleartype, grayscale)`) works as expected. Slightly changed, falls back to grayscale more often, but looks more right.
Unfortunately, does not come up with a good inner loop for buidling the package from the commandline. The inner loop for the resources just sucks.
* [x] closes#926
Adds snap layout support to the Terminal's maximize button. This PR is
full of BODGY, so brace yourselves.
Big thanks to Chris Swan in #11134 for building the prototype.
I don't believe this solves #8795, because XAML islands can't get
nchittest messages
- The window procedure for the drag bar forwards clicks on its client
area to its parent as non-client clicks.
- BODGY: It also _manually_ handles the caption buttons. They exist in
the titlebar, and work reasonably well with just XAML, if the drag bar
isn't covering them.
- However, to get snap layout support, we need to actually return
`HTMAXBUTTON` where the maximize button is. If the drag bar doesn't
cover the caption buttons, then the core input site (which takes up
the entirety of the XAML island) will steal the `WM_NCHITTEST` before
we get a chance to handle it.
- So, the drag bar covers the caption buttons, and manually handles
hovering and pressing them when needed. This gives the impression that
they're getting input as they normally would, even if they're not
_really_ getting input via XAML.
- We also need to manually display the button tooltips now, because XAML
doesn't know when they've been hovered for long enough. Hence, the
`_displayToolTip` `ThrottledFuncTrailing`
## Validation
Minimized, maximized, restored down, hovered the buttons slowly, moved
the mouse over them quickly, they feel the same as before. But now with
snap layouts appearing.
## TODO!
* [x] I'm working on getting the ToolTips on the caption buttons back. Alas, I needed a demo of this _today_, so I'll fix that tomorrow morning.
* [x] mild concern: I should probably test Win 10 to make sure there wasn't weird changes to the message loop in win11 that means this is broken on win10.
* [x] I think I used the wrong issue number for tons of my comments throughout this PR. Double check that. Should be #9443, not #9447.
Closes#9443
I thought this took care of #8587 ~as a bonus, because I was here, and the fix is _now_ trivial~, but looking at the latest commit that regressed.
Co-authored-by: Chris Swan <chswan@microsoft.com>
This is a followup commit for 168d28b.
By renaming `IInheritable::InsertParent(com_ptr)` and
`InsertParent(size_t, com_ptr)` into `AddLeastImportantParent(com_ptr)`
and `AddMostImportantParent(com_ptr)` respectively, we can improve
the clarity of our code's intent without the need for comments.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
As VS 2022 doesn't seem to store files with UTF-8 BOM as often anymore, we've
been getting more and more pull requests which seemingly randomly change files.
This cleans the situation up by removing the BOM from all files that have one.
Additionally, `Host.Tests.Feature.rc` was converted from UTF-16 to UTF-8.
This commit approximately doubles the performance of til::enumset
and reduces it's binary footprint by approximately 1kB.
Most of the binary size can be attributed to exception handling.
Unfortunately this commit removes assertions that the given values are less than
the number of bits in the `underlying_type`. However I believe this to be a good
trade-off as the tests previously only happened at runtime, while tests at
compile time would be highly preferable. Such tests are technically possible,
however MSVC fails to compile (valid) `static_assert`s containing
`static_cast`s over a parameter pack at the time of writing.
With future MSVC versions such checks can be added to this class.
This change was initially discussed in #10492, but was forgotten to
be considered before it was merged. Since the work was already done,
this commit re-introduces the optimization. It's free!
## PR Checklist
* [x] I work here.
* [x] Tests added/passed
## Validation Steps Performed
* Run `printf '\e]8;;http://example.com\e\\This is a link\e]8;;\e\\\n'` in WSL
* A wild dotted line appears ✔️
Since the settings UI's input fields behave similarly to the terminal's input,
`TerminalPage::_KeyDownHandler` also needs to behave similarly to
`TermControl::_KeyHandler`. This commit copies all relevant code
over from the latter into the former, including the suppression
of AltGr keys for keychord/action handling.
## PR Checklist
* [x] Closes#11788
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Use a German keyboard layout
* Open 2 regular tabs and 1 settings tab and focus an input field
* AltGr+2 produces the character ² ✔️
* Ctrl+Alt+2 opens the second tab ✔️
This PR merges the default colors and cursor color into the main color
table, enabling us to simplify the `ConGetSet` and `ITerminalApi`
interfaces, with just two methods required for getting and setting any
form of color palette entry.
The is a follow-up to the color table standardization in #11602, and a
another small step towards de-duplicating `AdaptDispatch` and
`TerminalDispatch` for issue #3849. It should also make it easier to
support color queries (#3718) and a configurable bold color (#5682) in
the future.
On the conhost side, default colors could originally be either indexed
positions in the 16-color table, or separate standalone RGB values. With
the new system, the default colors will always be in the color table, so
we just need to track their index positions.
To make this work, those positions need to be calculated at startup
based on the loaded registry/shortcut settings, and updated when
settings are changed (this is handled in
`CalculateDefaultColorIndices`). But the plus side is that it's now much
easier to lookup the default color values for rendering.
For now the default colors in Windows Terminal use hardcoded positions,
because it doesn't need indexed default colors like conhost. But in the
future I'd like to extend the index handling to both terminals, so we
can eventually support the VT525 indexed color operations.
As for the cursor color, that was previously stored in the `Cursor`
class, which meant that it needed to be copied around in various places
where cursors were being instantiated. Now that it's managed separately
in the color table, a lot of that code is no longer required.
## Validation
Some of the unit test initialization code needed to be updated to setup
the color table and default index values as required for the new system.
There were also some adjustments needed to account for API changes, in
particular for methods that now take index values for the default colors
in place of COLORREFs. But for the most part, the essential behavior of
the tests remains unchanged.
I've also run a variety of manual tests looking at the legacy console
APIs as well as the various VT color sequences, and checking that
everything works as expected when color schemes are changed, both in
Windows Terminal and conhost, and in the latter case with both indexed
colors and RGB values.
Closes#11768
I'm pretty exactly following the diff from #917. These paths weren't wrapped in `"`s, so building the solution in a directory with a space in it would explode.
Closes#917.
Turns out, the diff provided by that user wasn't exactly right. I've tested building in a directory with spaces now, and this seems to work.
Also caught a bug in the Generate Feature Flags script.
I'm working on making the FastUpToDate check in Vs work for the Terminal project. This is one of a few PRs in this area.
FastUpToDate lets vs check quickly determine that it doesn't need to do anything for a given project.
However, a few of our projects don't produce all the right artifacts, or check too many things, and this eventually causes the `wapproj` to rebuild, EVERY TIME YOU F5 in VS.
This second PR deals with some projects MYSTERIOUSLY depending on the `.xaml` files from `Terminal.Control`, even when they by all accounts shouldn't. TerminalSettingsModel ISN'T EVEN A XAML project, so I have no idea why it thinks it needs these xaml files. The TerminalAppLib project thinking it needs them - makes more sense, but is still confusing.
Below are my verbatim notes, which led to the solution in this PR.
```
34>------ Up-To-Date check: Project: Microsoft.Terminal.Settings.Model.Lib, Configuration: Debug x64 ------
34>Project is not up-to-date: build output 'c:\users\migrie\dev\public\terminal\bin\x64\debug\microsoft.terminal.settings.model.lib\microsoft.terminal.control\searchboxcontrol.xaml' is missing
```
* Just copying the xaml files from `bin\x64\debug\microsoft.terminal.control\microsoft.terminal.control\*.xaml` to `bin\x64\debug\microsoft.terminal.settings.model.lib\microsoft.terminal.control` seemed to fix this.
* the .xbfs were already there
* It's very unclear why these were ever needed? They aren't used in the build for `Microsoft.Terminal.Settings.Model.Lib`. They aren't copied as a part of the build either - no .xaml files are copied at all in fact
* [ ] Does TSE have these .xamls in it's output?
* UPDATE: checking out main, and building again - ran into this again. WHY??
* Cleaned again, then built TerminalApp.vcxproj. File is no longer needed? nothing makes sense.
* `obj\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsof.CA5CAD1A.tlog\Microsoft.Terminal.Settings.Model.Lib.write.1u.tlog`:
```
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.UI.Xaml\Assets\NoiseAsset_256X256_PNG.png
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xaml
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xaml
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xaml
```
From the build:
```
18>Target _CopyOutOfDateSourceItemsToOutputDirectory:
18> Skipping target "_CopyOutOfDateSourceItemsToOutputDirectory" because all output files are up-to-date with respect to the input files.
18> Input files:
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Control\Microsoft.Terminal.Control\SearchBoxControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Control\Microsoft.Terminal.Control\TermControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Control\Microsoft.Terminal.Control\TSFInputControl.xbf
18> C:\Users\migrie\dev\public\terminal\packages\Microsoft.UI.Xaml.2.7.0-prerelease.210913003\runtimes\win10-x64\native\Microsoft.UI.Xaml\Assets\NoiseAsset_256X256_PNG.png
18> Output files:
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.UI.Xaml\Assets\NoiseAsset_256X256_PNG.png
```
* Hmm, `21>Project is not up-to-date: build output 'c:\users\migrie\dev\public\terminal\bin\x64\debug\terminalapplib\microsoft.terminal.control\searchboxcontrol.xaml' is missing`
as well.
That's what the original purpose of #865 was, but I went ahead and added some additiona text, now that we've got more of a flow for github figured out.
Closes#865
If msbuild is already on the path, we don't need to look for it.
Also,
> I know what I did. I installed VS 2022, which is a prerelease VS install. `tools\razzle` prefers the stable builds. I think I'm gonna remove that.
* [x] Closes#1313
* [x] Closes#11446
I'm working on making the FastUpToDate check in Vs work for the Terminal project. This is one of a few PRs in this area.
FastUpToDate lets vs check quickly determine that it doesn't need to do anything for a given project.
However, a few of our projects don't produce all the right artifacts, or check too many things, and this eventually causes the `wapproj` to rebuild, EVERY TIME YOU F5 in VS.
This first PR deals with the `.copycomplete` file in `obj\x64\debug\terminalconnection\`. Below are my verbatim notes, which led to the solution in this PR.
### Problem 1 ✅
* There were missing `.copycomplete` files across the repo.
```
obj\x64\debug\microsoft.terminal.settings.model.lib\microsoft.terminal.settings.modellib.vcxproj.copycomplete
obj\x64\debug\microsoft.terminal.settings.model\microsoft.terminal.settings.model.vcxproj.copycomplete
obj\x64\debug\terminalapplib\terminalapplib.vcxproj.copycomplete
obj\x64\debug\terminalapp\terminalapp.vcxproj.copycomplete
obj\x64\debug\terminalconnection\terminalconnection.vcxproj.copycomplete
```
- just making empty files there seemed good enough.
- Might be because the CopyLocal target was already there, but the task didn't ever run to create that file? Weird.
* UPDATE: checking out main, and building again - the `.copycomplete`s are gone. So that's something that can be improved.
* The only place I could find a reference was in `"obj\x64\Debug\TerminalConnection\TerminalConnection.vcxproj.FileListAbsolute.txt"`, which will get updated if you remove the line from that file (but no one seemingly writes it or mentiones it in the log)
* Deleting `bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll` then building the project did copy the file, but it didn't touch the copycomplete. Weird.
* Why does
- `TerminalConnection` think it needs this
- `Microsoft.Terminal.Settings.Model.Lib` have one
- `Microsoft.Terminal.Control*` **NOT** have one
* This file is a [`@(CopyUpToDateMarker)`](https://github.com/dotnet/msbuild/blob/main/src/Tasks/Microsoft.Common.CurrentVersion.targets#L392)
* The target [`_CopyFilesMarkedCopyLocal`](https://github.com/dotnet/msbuild/blob/main/src/Tasks/Microsoft.Common.CurrentVersion.targets#L4795) touches `@(CopyUpToDateMarker)`, when:
- `"'@(ReferencesCopiedInThisBuild)' != ''` and
- `'$(WroteAtLeastOneFile)' == 'true'"`
* In out build output:
```
6>Target _CopyFilesMarkedCopyLocal:
6> Using "Copy" task from assembly "Microsoft.Build.Tasks.Core, Version=15.1.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a".
6> Task "Copy"
6> Did not copy from file "C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll" to file "C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll" because the "SkipUnchangedFiles" parameter was set to "true" in the project and the files' sizes and timestamps match.
6> Done executing task "Copy".
6> Task "Touch" skipped, due to false condition; ('@(ReferencesCopiedInThisBuild)' != '' and '$(WroteAtLeastOneFile)' == 'true') was evaluated as ('C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll' != '' and 'False' == 'true').
```
- So `WroteAtLeastOneFile` should be true, when it's currently false. That _looks_ like it's set to true when the file does get copied, wheich did't happen because the copy was skipped.
- WAIT LOOK AT THAT MESSAGE. "Did not copy from file "
`"C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll"` to file
`"C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll"`
THESE ARE THE SAME FILE.
`@(ReferenceCopyLocalPaths)` is filled with the file already?!
- The Target `AppLocalFromInstalled` is the only other thing that references `cpprest142_2_10d.dll`.
- Even if you delete the `cpprest142_2_10d.dll`, then `_CopyFilesMarkedCopyLocal` still evaluates the Touch condition as false, and doesn't touch it.
- the `deployBinary()` function in `packages\vcpkg-cpprestsdk.2.10.14\scripts\buildsystems\msbuild\applocal.ps1` does the actual job of copying the file. It copies it outside of MsBuild, which prevents MsBuild from copying it, and now MsBuild thinks it shouldn't write the `.copycomplete` file itself.
I'm working on making the FastUpToDate check in Vs work for the Terminal project. This is one of a few PRs in this area.
FastUpToDate lets vs check quickly determine that it doesn't need to do anything for a given project.
However, a few of our projects don't produce all the right artifacts, or check too many things, and this eventually causes the `wapproj` to rebuild, EVERY TIME YOU F5 in VS.
This third PR deals with the Actual fast up to date check for the CascadiaPackage.wapproj. When #11804, #11805 and this PR are all merged, you should be able to just F5 the Terminal in VS, and then change NOTHING, and F5 it again, without doing a build at all.
The wapproj `GetResolvedWinMD` target tries to get a winmd from every cppwinrt
executable we put in the package. But we DON'T produce a winmd. This makes the
FastUpToDate check fail every time, and leads to the whole wapproj build
running even if you're just f5'ing the package. EVEN AFTER A SUCCESSFUL BUILD.
Setting GenerateWindowsMetadata=false is enough to tell the build system that
we don't produce one, and get it off our backs.
### teams chat where we figured this out
[3:38 PM] Dustin Howett
however, that's not the only thing that "GetTargetPath" checks.
[3:38 PM] Dustin Howett
oh yeah more info: wapproj calls GetTargetPath on all projects it references
[3:38 PM] Dustin Howett
when it calls GTP on WindowsTerminal.vcxproj it is getting back a winmd (!)
[3:39 PM] Dustin Howett
here's the magic
[3:39 PM] Dustin Howett
[3:39 PM] Dustin Howett
it checks if any Link items specify GenerateWindowsMetadata
Upgrades our SDK from 19041 (Windows 10 20H1) to 22000 (Windows 11 RTM).
The newer SDK is more compatible with /Zc:preprocessor
and will allow us to use newer Windows 11 APIs directly.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Compiles ✔️
* Runs ✔️
til::equals:
At the time of writing wmemcmp() is not an intrinsic for MSVC,
but the STL uses it to implement wide string comparisons.
This produces 3x the assembly _per_ comparison and increases
runtime by 2-3x for strings of medium length (16 characters)
and 5x or more for long strings (128 characters or more).
See: https://github.com/microsoft/STL/issues/2289
Additionally a number of case insensitive, locale unaware
helpers for prefix/suffix comparisons are introduced.
There are some code pages with "unmapped" code points in the C1 range,
which results in them being translated into Unicode C1 control codes,
even though that is not their intended use. To avoid having these
characters triggering unintentional escape sequences, this PR now
disables C1 controls by default.
Switching to ISO-2022 encoding will re-enable them, though, since that
is the most likely scenario in which they would be required. They can
also be explicitly enabled, even in UTF-8 mode, with the `DECAC1` escape
sequence.
What I've done is add a new mode to the `StateMachine` class that
controls whether C1 code points are interpreted as control characters or
not. When disabled, these code points are simply dropped from the
output, similar to the way a `NUL` is interpreted.
This isn't exactly the way they were handled in the v1 console (which I
think replaces them with the font _notdef_ glyph), but it matches the
XTerm behavior, which seems more appropriate considering this is in VT
mode. And it's worth noting that Windows Explorer seems to work the same
way.
As mentioned above, the mode can be enabled by designating the ISO-2022
coding system with a `DOCS` sequence, and it will be disabled again when
UTF-8 is designated. You can also enable it explicitly with a `DECAC1`
sequence (originally this was actually a DEC printer sequence, but it
doesn't seem unreasonable to use it in a terminal).
I've also extended the operations that save and restore "cursor state"
(e.g. `DECSC` and `DECRC`) to include the state of the C1 parser mode,
since it's closely tied to the code page and character sets which are
also saved there. Similarly, when a `DECSTR` sequence resets the code
page and character sets, I've now made it reset the C1 mode as well.
I should note that the new `StateMachine` mode is controlled via a
generic `SetParserMode` method (with a matching API in the `ConGetSet`
interface) to allow for easier addition of other modes in the future.
And I've reimplemented the existing ANSI/VT52 mode in terms of these
generic methods instead of it having to have its own separate APIs.
## Validation Steps Performed
Some of the unit tests for OSC sequences were using a C1 `0x9C` for the
string terminator, which doesn't work by default anymore. Since that's
not a good practice anyway, I thought it best to change those to a
standard 7-bit terminator. However, in tests that were explicitly
validating the C1 controls, I've just enabled the C1 parser mode at the
start of the tests in order to get them working again.
There were also some ANSI mode adapter tests that had to be updated to
account for the fact that it has now been reimplemented in terms of the
`SetParserMode` API.
I've added a new state machine test to validate the changes in behavior
when the C1 parser mode is enabled or disabled. And I've added an
adapter test to verify that the `DesignateCodingSystems` and
`AcceptC1Controls` methods toggle the C1 parser mode as expected.
I've manually verified the test cases in #10069 and #10310 to confirm
that they're no longer triggering control sequences by default.
Although, as I explained above, the C1 code points are completely
dropped from the output rather than displayed as _notdef_ glyphs. I
think this is a reasonable compromise though.
Closes#10069Closes#10310
This commit is a minimal fix in order to pass the
`IDWriteFontCollection` we create out of .ttf files residing next to our
binaries to the `IDWriteFontFallback::MapCharacters` call. The
`IDWriteTextFormat` is used in order to carry the font collection over
into `CustomTextLayout`.
## Validation
* Put `JetBrainsMono-Regular.ttf` into the binary output directory
* Modify `HKCU:\Console\*\FaceName` to `JetBrains Mono`
* Launch OpenConsole.exe
* OpenConsole uses JetBrains Mono ✔️Closes#11032Closes#11648
## Summary of the Pull Request
This creates an `elevated-state.json` that lives in `%LOCALAPPDATA%` next to `state.json`, that's only writable when elevated. It doesn't _use_ this file for anything, it just puts the framework down for use later.
It's _just like `ApplicationState`_. We'll use it the same way.
It's readable when unelevated, which is nice, but not writable. If you're dumb and try to write to the file when unelevated, it'll just silently do nothing.
If we try opening the file and find out the permissions are different, we'll _blow the file away entirely_. This is to prevent someone from renaming the original file (which they can do unelevated), then slapping a new file that's writable by them down in it's place.
## References
* We're going to use this in #11096, but these PRs need to be broken up.
## PR Checklist
* [x] Closes nothing
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - maybe? not sure we have docs on `state.json` at all yet
## Validation Steps Performed
I've played with this much more in `dev/migrie/f/non-terminal-content-elevation-warning`
###### followed by #11308, #11310
This commit introduces "AtlasEngine", a new text renderer based on DxEngine.
But unlike it, DirectWrite and Direct2D are only used to rasterize glyphs.
Blending and placing these glyphs into the target view is being done using
Direct3D and a simple HLSL shader. Since this new renderer more aggressively
assumes that the text is monospace, it simplifies the implementation:
The viewport is divided into cells, and its data is stored as a simple matrix.
Modifications to this matrix involve only simple pointer arithmetic and is easy
to understand. But just like with DxEngine however, DirectWrite
related code remains extremely complex and hard to understand.
Supported features:
* Basic text rendering with grayscale AA
* Foreground and background colors
* Emojis, including zero width joiners
* Underline, dotted underline, strikethrough
* Custom font axes and features
* Selections
* All cursor styles
* Full alpha support for all colors
* _Should_ work with Windows 7
Unsupported features:
* A more conservative GPU memory usage
The backing texture atlas for glyphs is grow-only and will not shrink.
After 256MB of memory is used up (~20k glyphs) text output
will be broken until the renderer is restarted.
* ClearType
* Remaining gridlines (left, right, top, bottom, double underline)
* Hyperlinks don't get full underlines if hovered in WT
* Softfonts
* Non-default line renditions
Performance:
* Runs at up to native display refresh rate
Unfortunately the frame rate often drops below refresh rate, due us
fighting over the buffer lock with other parts of the application.
* CPU consumption is up to halved compared to DxEngine
AtlasEngine is still highly unoptimized. Glyph hashing
consumes up to a third of the current CPU time.
* No regressions in WT performance
VT parsing and related buffer management takes up most of the CPU time (~85%),
due to which the AtlasEngine can't show any further improvements.
* ~2x improvement in raw text throughput in OpenConsole
compared to DxEngine running at 144 FPS
* ≥10x improvement in colored VT output in WT/OpenConsole
compared to DxEngine running at 144 FPS
Drag and drop does not work for WSL because paths are pasted as windows
paths having incorrect path separator and path root. This PR adds code
to correct the path in TerminalControl before pasting to WSL terminals.
One problem with this approach is that it assumes the default WSL
automount root of "/mnt". It would be possible to add a setting like
"WslDragAndDropMountRoot"... but I decided it if someone wants to change
automount location it would be simple enough just to create the "/mnt"
symlink in WSL.
## Validation
Couldn't find an obvious place to add a test. Manually tested
cut-n-paste from following paths:
- "c:\"
- "c:\subdir"
- "c:\subdir\subdir"
- "\\wsl.localhost\<distro>"
- \\wsl.localhost\<distro>\subdir"
Closes#331
6140fd9 causes a binary size regression in conhost.
This PR fixes most if not all of the regression, by replacing `FMT_STRING`
with `FMT_COMPILE` allowing us to drop most of the formatters built
into fmt during linking (for instance floating point formatters).
Additionally `std::wstring` was replaced with `fmt::basic_memory_buffer`
in the same vein as was done for VtEngine. Stack is
cheap and this prevents any unnecessary allocations.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* vttest 11.2.5.3.6.7 and .8 (DECSTBM and SGR) complete successfully ✅
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 063b86ac10af16cade5c0754adcbf27e7e9ae266
Related work items: MSFT-34534216, MSFT-36986009, MSFT-36986203
Fixes MSFT:34673647, at least I'm pretty sure. That's only ever hit a few
times externally, and internally it's hitting a lot on 1.9.1942 builds, which
doesn't really make any sense.
Window sends an event that requests exit from fullscreen then SC_RESTORE messages is sent and it is in fullscreen mode.
Closes#10607
## Validation Steps Performed
Border and tabbar now appear after exiting fullscreen via "win+arrow down".
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Checked the link, skipping the redirect HTTP => HTTPS this way 0:-)
This one
http://azuredevopspodcast.clear-measure.com/kayla-cinnamon-and-rich-turner-on-devops-on-the-windows-terminal-team-episode-54
is still only available via HTTP, sadly.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<http://www.runasradio.com/Shows/Show/645> is being redirected to <https://www.runasradio.com/Shows/Show/645>
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* N/A Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* N/A Tests added/passed
* N/A Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* N/A Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## ~~Detailed Description of the Pull Request / Additional comments~~
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Opened the link.
Implements `_MakePane` in `TerminalPage`, which creates a pane that then can be used to pass into another pane to split or to create a new tab with. Places where we split pane or create a new tab now use `_MakePane`.
## PR Checklist
* [x] Closes#11021
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I work here
## Validation Steps Performed
Stands up to manual testing with multiple new pane/new tab commands as well as startup actions
## Summary of the Pull Request
In the original implementation, we used two different orderings for the color tables. The WT color table used ANSI order, while the conhost color table used a Windows-specific order. This PR standardizes on the ANSI color order everywhere, so the usage of indexed colors is consistent across both parts of the code base, which will hopefully allow more of the code to be shared one day.
## References
This is another small step towards de-duplicating `AdaptDispatch` and `TerminalDispatch` for issue #3849, and is essentially a followup to the SGR dispatch refactoring in PR #6728.
## PR Checklist
* [x] Closes#11461
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #11461
## Detailed Description of the Pull Request / Additional comments
Conhost still needs to deal with legacy attributes using Windows color order, so those values now need to be transposed to ANSI colors order when creating a `TextAttribute` object. This is done with a simple mapping table, which also handles the translation of the default color entries, so it's actually slightly faster than the original code.
And when converting `TextAttribute` values back to legacy console attributes, we were already using a mapping table to handle the narrowing of 256-color values down to 16 colors, so we just needed to adjust that table to account for the translation from ANSI to Windows, and then could make use of the same table for both 256-color and 16-color values.
There are also a few places in conhost that read from or write to the color tables, and those now need to transpose the index values. I've addressed this by creating separate `SetLegacyColorTableEntry` and `GetLegacyColorTableEntry` methods in the `Settings` class which take care of the mapping, so it's now clearer in which cases the code is dealing with legacy values, and which are ANSI values.
These methods are used in the `SetConsoleScreenBufferInfoEx` and `GetConsoleScreenBufferInfoEx` APIs, as well as a few place where color preferences are handled (the registry, shortcut links, and the properties dialog), none of which are particularly sensitive to performance. However, we also use the legacy table when looking up the default colors for rendering (which happens a lot), so I've refactored that code so the default color calculations now only occur once per frame.
The plus side of all of this is that the VT code doesn't need to do the index translation anymore, so we can finally get rid of all the calls to `XTermToWindowsIndex`, and we no longer need a separate color table initialization method for conhost, so I was able to merge a number of color initialization methods into one. We also no longer need to translate from legacy values to ANSI when generating VT sequences for conpty.
The one exception to that is the 16-color VT renderer, which uses the `TextColor::GetLegacyIndex` method to approximate 16-color equivalents for RGB and 256-color values. Since that method returns a legacy index, it still needs to be translated to ANSI before it can be used in a VT sequence. But this should be no worse than it was before.
One more special case is conhost's secret _Color Selection_ feature. That uses `Ctrl`+Number and `Alt`+Number key sequences to highlight parts of the buffer, and the mapping from number to color is based on the Windows color order. So that mapping now needs to be transposed, but that's also not performance sensitive.
The only thing that I haven't bothered to update is the trace logging code in the `Telemetry` class, which logs the first 16 entries in the color table. Those entries are now going to be in a different order, but I didn't think that would be of great concern to anyone.
## Validation Steps Performed
A lot of unit tests needed to be updated to use ANSI color constants when setting indexed colors, where before they might have been expecting values in Windows order. But this replaced a wild mix of different constants, sometimes having to use bit shifting, as well as values mapped with `XTermToWindowsIndex`, so I think the tests are a whole lot clearer now. Only a few cases have been left with literal numbers where that seemed more appropriate.
In addition to getting the unit tests working, I've also manually tested the behaviour of all the console APIs which I thought could be affected by these changes, and confirmed that they produced the same results in the new code as they did in the original implementation.
This includes:
- `WriteConsoleOutput`
- `ReadConsoleOutput`
- `SetConsoleTextAttribute` with `WriteConsoleOutputCharacter`
- `FillConsoleOutputAttribute` and `FillConsoleOutputCharacter`
- `ScrollConsoleScreenBuffer`
- `GetConsoleScreenBufferInfo`
- `GetConsoleScreenBufferInfoEx`
- `SetConsoleScreenBufferInfoEx`
I've also manually tested changing colors via the console properties menu, the registry, and shortcut links, including setting default colors and popup colors. And I've tested that the "Quirks Mode" is still working as expected in PowerShell.
In terms of performance, I wrote a little test app that filled a 80x9999 buffer with random color combinations using `WriteConsoleOutput`, which I figured was likely to be the most performance sensitive call, and I think it now actually performs slightly better than the original implementation.
I've also tested similar code - just filling the visible window - with SGR VT sequences of various types, and the performance seems about the same as it was before.
#11404 changed `_OpenSettingsUI` to `OpenSettingsUI` in `TerminalPage`, but there is still one leftover reference to `_OpenSettingsUI`. This commit fixes that.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds ability for app to change system context menu
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9666
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Introduces X-macros to reduce the number of places we need to write essentially the same line of code but for a different setting (declaring it in the header file, in `Copy`, `LayerJson`, `ToJson`, etc).
## Summary of the Pull Request
There is a non-zero subset of applications that randomly output _Locking Shift_ escape sequences which will invoke a character set from G2 or G3 into the left half of the code table. If those G-sets are mapped to Latin1, that can result in the terminal producing output that appears to be broken. This PR now defaults all G-sets to ASCII, to prevent an unintentional _Locking Shift_ from having any effect.
## PR Checklist
* [x] Closes#10408
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #10408
## Detailed Description of the Pull Request / Additional comments
Most other modern terminals also default to ASCII in all G-sets, so this shouldn't break any modern applications. Legacy 8-bit applications may still expect the G2 and G3 sets mapped to Latin1, but they would also need to have the ISO-2022 encoding enabled, so we can keep them happy by setting G2 and G3 correctly when the ISO-2022 encoding is requested.
## Validation Steps Performed
I've manually confirmed that `echo -e "\en"` and `echo -e "\eo"` no longer have any visible effect on the output (at least without first invoking another character set into G2 or G3). I've also confirmed that they do still work as expected (i.e. selecting Latin1) after enabling the ISO-2022 encoding.
## Summary of the Pull Request
When we are on a settings UI tab, `_GetActiveControl` returns a `nullptr`, make sure not to try and focus it in that case
## PR Checklist
* [x] Closes#11633
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
No longer crashes
This is a pretty obvious typo in retrospect. Never hit it before, because in all non-defterm windows, the `_startupActions` always has one action.
* [x] Closes#11463
FontInfoBase and it's descendents are missing noexcept annotations, which
virally forces other code to not be noexcept as well during AuditMode checks.
Apart from adding noexcept, this commit also
* Passes std::wstring_view by reference.
* Pass the FillLegacyNameBuffer argument as a simple pointer-to-array,
allowing us to fill the buffer with a single memcpy.
(gsl::span's iterators inhibit any internal STL optimizations.)
* Move operator== declarations inside the class to reduce code size.
All other changes are an effect of the virality of noexcept.
This is an offshoot from #11623.
## Validation Steps Performed
* It still compiles ✔️
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Opt in setting to trim trailing white space when pasting a text into the terminal
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9400
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manually testing to paste text with and without trailing white spaces, with and without the option activated
The "updates" key is an alternative "guid" key for fragment profiles.
But SettingsLoader::_appendProfile stores and deduplicates profiles according
to their "guid" only. We need to modify the function to optionally store
profiles by their "updates" key as well, otherwise multiple fragment
profiles without "guid" might collide as they produce the same default GUID.
## PR Checklist
* [x] Closes#11597
* [x] I work here
* [ ] Tests added/passed
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Unit tests pass ✔️
* Issue #11597 doesn't reproduce anymore ✔️
We don't actually have a hard date for 2.0 anymore, so I'm removing those dates to make room for 1.13, 1.14, etc. Also updated the list of milestones with the current state. We're actually doing pretty darn good (considering there was a bit of a global pandemic to contend with!)
This commit renames `Base64::s_Decode` into `Base64::Decode` and improves its
average performance on short strings of less than 200 characters by 4.5x.
This is achieved by implementing a classic base64 decoder that reads 4
characters at a time and produces 3 output bytes. Furthermore a small
128 byte lookup table is used to quickly map characters to values.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Run WSL in Windows Terminal
* Run `printf "\033]52;c;aHR0cHM6Ly9naXRodWIuY29tL21pY3Jvc29mdC90ZXJtaW5hbC9wdWxsLzExNDY3\a"`
* Clipboard contains `https://github.com/microsoft/terminal/pull/11467` ✔️
Instead of having a separate method for setting each mouse and keyboard
mode, this PR consolidates them all into a single method which takes a
mode parameter, and stores the modes in a `til::enumset` rather than
having a separate `bool` for each mode.
This enables us to get rid of a lot of boilerplate code, and makes the
code easier to extend when we want to introduce additional modes in the
future. It'll also makes it easier to read back the state of the various
modes when implementing the `DECRQM` query.
Most of the complication is in the `TerminalInput` class, which had to
be adjusted to work with an `enumset` in place of all the `bool` fields.
For the rest, it was largely a matter of replacing calls to all the old
mode setting methods with the new `SetInputMode` method, and deleting a
bunch of unused code.
One thing worth mentioning is that the `AdaptDispatch` implementation
used to have a `_ShouldPassThroughInputModeChange` method that was
called after every mode change. This code has now been moved up into the
`SetInputMode` implementation in `ConhostInternalGetSet` so it's just
handled in one place. Keeping this out of the dispatch class will also
be beneficial for sharing the implementation with `TerminalDispatch`.
## Validation
The updated interface necessitated some adjustments to the tests in
`AdapterTest` and `MouseInputTest`, but the essential structure of the
tests remains unchanged, and everything still passes.
I've also tested the keyboard and mouse modes in Vttest and confirmed
they still work at least as well as they did before (both conhost and
Windows Terminal), and I tested the alternate scroll mode manually
(conhost only).
Simplifying the `ConGetSet` and `ITerminalApi` is also part of the plan
to de-duplicate the `AdaptDispatch` and `TerminalDispatch`
implementation (#3849).
Fixes#11606
This is weird, but the infobars would appear totally on top of the
TerminalPage when `showTabsInTitlebar:false`. This would result in the infobar
obscuring the tabs.
Now, the infobars are strictly inserted after the tabs, before the content. So
when they appear, they will reduce the amount of space usable for the control.
That is a little annoying, but preferable to the tabs totally not existing.
Relevant conversation notes from #10798:
> > If the info bar is not local to the tab, then its location between the tab
> > bar (when the title bar is hidden) and the terminal panes feels
> > misleading. Should it instead be above the tab bar or below the terminal
> > panes?
>
> You're... not wrong here. It's maybe not the best place for it, but _on top_
> of the tabs would look insane, and probably wouldn't even work easily, given
> the way we reparent the tab row into the titlebar.
>
> In the pane itself would make more sense, but that runs abreast of all sorts
> of things like #9024, #4998, which might make more sense.
I'm just gonna go with this now, because it's _better_ than before, while we
work out what's _best_.
After this commit OpenConsoleProxy will be built without a CRT.
This cuts down its binary size and DLL dependency bloat.
We hope that this fixes a COM server activation bug if the
user doesn't have a CRT installed globally on their system.
Fixes#11529
## Summary of the Pull Request
Ensures that the background image path is displayed in the settings UI.
## References
One of the items on #11353
## PR Checklist
* [x] Closes#11541
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Set the background image path and saw that it was displayed in the settings UI.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Moves baskgroung image update releated code into separate function and adds uri path construction exeption handling.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11361
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tried to put garbage as a path. Terminal didn't crashed.
Don't crash if we try to save the window layout while we are closing, and try to avoid saving at all.
Might impact #11354
## Detailed Description of the Pull Request / Additional comments
- Revoke the event handler/save throttler so we don't even try to get the window layout when we are closing
- Try to check for nullptrs, but then apply `try {} CATCH_LOG()` liberally
## Validation Steps Performed
The happy path of saving normally is still fine, but I haven't been unlucky enough to trigger the crash myself.
This commit reduces the number of generated VS profiles from 6 down to just 2
per VS instance. The reason we did this is out of concern of overwhelming or
annoying new users with too many profiles. Especially since it's far easier
at the moment to add new generators compared to removing them.
As before only the latest instance is not hidden by default.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [x] As discussed in a Team Sync meeting
## Validation Steps Performed
* Installed Visual Studio 2019 and 2022 Preview
* A profile for both is generated, while the 2019 one is hidden by default ✔️
* $env:VSCMD_ARG_TGT_ARCH is x64 on my AMD64 machine ✔️
Considering the number of reports of "defterm isn't working (mysteriously)", I figured more logging current hurt. I also added a wprp profile for the defterm logging as well, which should capture conhost side things as well.
From an elevated conhost:
```
wpr -start path\to\Terminal.wprp!Defterm.Verbose
wpr -stop %USERPROFILE%\defterm-trace.etl
```
* [x] I work here
* [x] relevant to: #10594, #11529, #11524.
## Summary of the Pull Request
Currently when configuring the action
```json
{ "command": { "action": "closeTabsAfter" } }
```
we get a schema error in VSCode: `Matches multiple schemas when only one must validate.`.
The problem is that it matches both `closeTabsAfter` and `closeTab`, since the schema uses regex patterns to match instead of plain strings. I swapped the usage of `"pattern"` with `"const"` for all actions.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I checked and this action configuration no longer errors.
Up until this commit PSReadline caused OutputDebugString to be called
with a complex log message to on every newline. At the time of writing,
Visual Studio's Output window is fairly slow and after this change newlines
feel a fair bit snappier when running under Visual Studio's debugger.
## Validation Steps Performed
* pwsh.exe continues to work correctly ✔️
ControlCore::FontFaceName() is called 10/s by TSFInputControl.
The getter was modified to cache the STL string in a hstring allowing
us to return a value without temporary allocations during runtime.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Font face and size changes properly update TSFInputControl ✔️
## Summary of the Pull Request
Currently when configuring the action
```json
{ "command": { "action": "commandPalette", "launchMode": "commandLine" }, "key": "ctrl+shift+p" }
```
or
```json
{ "command": { "action": "multipleActions", "actions": [{ "action": "paste" }] }, "key": "ctrl+shift+v" }
```
we get a schema error in VSCode. These object variants of the actions were not configured properly in the schema, so I fixed it.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
In the schema there is a big `oneOf` for the `command` of an action under `actions`.
Commands that also accept extra arguments have an object type defined for it.
The `commandPalette` and `multipleActions` commands accept extra arguments, and also have matching `CommandPaletteAction` and `MultipleActionsAction` object types defined, but they are unused.
So I added them to the `oneOf` array in the correct placement.
## Validation Steps Performed
## Summary of the Pull Request
The `settings.json` schema had `"default"`s for some boolean settings set as quoted strings (`"true"` / `"false"`), so I removed the quotes.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
VSCode autocompletes the default value when you select the setting in intellisense, so it autocompleted a string which caused a schema error. Booleans should be JSON booleans, not quoted.
## Validation Steps Performed
## Summary of the Pull Request
As a part of the Interactivity split, `TermControlAutomationPeer` had to be split into `TermControlAutomationPeer` (TCAP) and `InteractivityAutomationPeer` (IAP). Just about all of the functions in `InterativityAutomationPeer` operate by calling the non-XAML UIA Provider then wrapping the resulting `UIATextRange` into a XAML format (a `XamlUiaTextRange` [XUTR]). As a part of that XUTR constructor, we need a reference to the parent provider.
We generally get that via `ProviderFromPeer()`, but IAP's `ProviderFromPeer()` returned null (presumably because IAP isn't in the UI tree, whereas TCAP is directly registered as the automation peer for the `TermControl`).
It looks like some screen readers didn't care (like NVDA, though there may be a chance we just didn't encounter an issue just yet), but Narrator definitely did.
The fix was to provide XUTR constructors the `ProviderFromPeer` from TCAP, _not_ IAP. To accomplish this, IAP now holds a weak reference to TCAP, and provides the `ProviderFromPeer` when needed. We can't cache this result because there is no guarantee that it won't change.
Some miscellaneous changes include:
- `TermControl::OnCreateAutomationPeer` now returns the existing auto peer instead of always creating a new one
- `TCAP::WrapArrayOfTextRangeProviders` was removed as it was unused (normally, this would be directly affected by the main `ProviderFromPeer` change here)
- `XUTR::GetEnclosingElement` is now hooked up to trace logging for debugging purposes
## References
Introduced in #10051Closes#11488
## Validation Steps Performed
✅ Narrator scan mode now works (verified with character, word, and line navigation)
✅ NVDA movement still works (verified with word and line navigation)
## Summary of the Pull Request
When the window moves, hide any visible content dialog (only one can be shown at a time) and ensure its associated async operation is terminated.
#10922 dismisses any open popups when the window is moved or any scroll viewer scrolls. However, if you just close a Popup from the UI tree, the async operation associated to a ContentDialog (started with `dialog.ShowAsync`) does not terminate. The dialog lock that prevents opening multiple dialogs at the same time is not released, and no further dialog can be shown.
Explicitly dismissing the only visible ContentDialog using its `Hide` method terminates the operation.
## Validation Steps Performed
Manual tests, open up dialogs and move the window (like in #11425)
References #10922Closes#11425
This commit enables /fp:fast. This doubles the performance of the Delta E
computation in #11095 for instance. Additionally it re-enables two options for
debug builds which are normally enabled by default by Visual Studio.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* No change in binary size
* No obvious change in behavior
This change enables access to the Defaults page in stable builds of
terminal. It is intended that we backport this feature flag edit to
1.11, so that Defaults can roll out with 1.11 when it becomes stable.
If we find that the settings file doesn't exist, or is empty, then let's quick
delete the state file as well. If the user does have a state file, and not a
settings, then they probably tried to reset their settings. It might have data
in it that was only relevant for a previous iteration of the settings file. If
we don't, we'll load the old state and ignore all dynamic profiles (for
example)!
We'll remove all of the data in the `ApplicationState` object and reset it to
the defaults.
This will delete the state file!
That's the sure-fire way to make sure the data doesn't come back. If we leave
it untouched, then when we go to write the file back out, we'll first re-read
it's contents and try to overlay our new state. However, nullopts won't remove
keys from the JSON, so we'll end up with the original state in the file.
* [x] Closes#11119
* [x] Tested on a cold launch of the Terminal with an existing `state.json`
and an empty `settings.json`
* [x] Tested a hot-reload of deleting the `settings.json`
This implements command line matching for `CascadiaSettings::GetProfileForArgs`.
The command lines for all user profiles are resolved to absolute file paths,
argument quotes are standardized ("canonicalized") and the results are cached.
When `GetProfileForArgs` is called with a Commandline() value, we "canonicalize"
the argument as well and find the profile that is the longest prefix.
If none could be found the default profile is returned.
## PR Checklist
* [x] Closes#9458
* [x] Closes#10952
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* Open a `cmd.exe` tab in the store-version of WT
* Run `start cmd`
--> A tab with the `cmd.exe` profile opens
* Run `start pwsh.exe`
--> A tab with the PowerShell 7 profile opens
* Run PowerShell 7 from the start menu
--> A tab with the PowerShell 7 profile opens
* Create a symlink for PowerShell 7 and launch `pwsh.exe` from there
--> A tab with the PowerShell 7 profile opens
I thought that microsoft/microsoft-ui-xaml#3183 might just fix this for us, but it didn't. We've got our RadioButton's all up in SettingsContainers, so they all think they're `AutomationProperties.AccessibilityView="Raw"` for some reason. If you simply add the `Content` to these, then they all end up correct in Accessibility Insights
## PR Checklist
* [x] Will take care of #11248 but I can't be the one to close it.
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
This commit adds a simple information popup about default terminals,
guiding first-time Windows 11 users into changing the default terminal.
## Validation Steps Performed
* Info bar pops up on Windows 11 ✔️
* Info bar can be dismissed persistently ✔️
This was originally in #11308. Thought we should check it in for 1.12 even
though that won't merge this release. Should slightly mitigate the number of
users that see this warning.
`CascadiaSettings::_createNewProfile` failed to call `_FinalizeInheritance`.
This commits fixes the issue and adds a stern warning for future me.
## PR Checklist
* [x] Closes#11392
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Open settings UI
* Modify font size in base layer
* _Don't_ save
* Duplicate any profile with default font size
* Ensure the duplicated profile shows the modified base layer font size ✔️
In #11180 we made `opacity` independent from `useAcrylic`. We also changed the mouse wheel behavior to only change opacity, and not mess with acrylic.
However, on Windows 10, vintage opacity doesn't work at all. So there, we still need to manually enable acrylic when the user requests opacity.
* [x] Closes#11285
SUI changes in action:
It's possible that we're about to be started, _before_
our paired connection is started. Both will get Start()'ed when
their owning TermControl is finally laid out. However, if we're
started first, then we'll immediately start printing to the other
control as well, which might not have initialized yet. If we do
that, we'll explode.
Instead, wait here until the other connection is started too,
before actually starting the connection to the client app. This
will ensure both controls are initialized before the client app
is.
Fixes#11282
Tested: Opened about 100 debug taps. They all worked. :shipit:
`CascadiaSettings` is default constructed when human readable error messages are
returned. Even in such cases we need to ensure that all fields are properly
initialized, as a caller might decide to call a `GlobalSettings` getter.
Thus a crash occurred whenever a user was hot-reloading their settings file with
invalid JSON as other code then tried to compare the `GlobalSettings()`.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Start Windows Terminal and ensure the settings load fine
* Add `"commandline": 123` to any of the generated profiles in settings.json
* The application doesn't crash and shows a warning message
WinUI/XAML requires the `SelectedItem` to be member of the list of
`ItemsSource`. `CascadiaSettings::DefaultTerminals()` is such an `ItemsSource`
and is called every time the launch settings page is visited.
It calls `DefaultTerminal::Available()` which in turn calls `Refresh()`.
While the `SelectedItem` was cached in `CascadiaSettings`, the value of
`DefaultTerminals()` wasn't. Thus every time the page was visited, it refreshed
the `ItemsSource` list without invalidating the current `SelectedItem`.
This commit prevents such accidental mishaps from occurring in the future,
by moving the responsibility of caching solely to the `CascadiaSettings` class.
## PR Checklist
* [x] Closes#11424
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Navigating between SUI pages maintains the current dropdown selection ✔️
* Saving the settings saves the correct terminal at `HKCU:\Console\%%Startup` ✔️
## Summary of the Pull Request
Fixes two issues related to SUI's Actions page:
1. Crash when adding an action and setting key chord to one that is already taken
- **Cause**: the new key binding that was introduced with the "Add new" button appears in `_KeyBindingList` that we're iterating over. This has no `CurrentKeys()`, resulting in a null pointer exception.
- **Fix**: null-check it
2. There's an action that appears as being nameless in the dropdown
- **Cause**: The culprit seems to be `MultipleActions`. We would register it, but it wouldn't have a name, so it would appear as a nameless option.
- **Fix**: if it has no name, don't register it. This is also future-proof in that any new nameless actions won't be automatically added.
Closes#10981
Part of #11353
This commit fixes various failing TestHostApp unit tests.
Most of these broke as part of 168d28b (#11184).
## PR Checklist
* [x] Closes#11339
* [x] I work here
* [x] Tests added/passed
I've had a hard time with the tab colors this week.
Turns out that setting the background to nullptr will make the tabviewitem invisible to hit tests. `Transparent`, on the other hand, is totally valid, and the expected default.
Tabs as of this commit:
## PR Checklist
* [x] Closes#11382
* [x] I work here
This low-key reverts a bit of #11369, which fixed#11294, which regressed in #11240
This fixes an issue that Touch Keyboard is not invoked when user taps on the PowerShell.
Before this change, it was returning small rectangle on the right of the cursor. Touch Keyboard should be invoked by tapping anywhere inside the console.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
ITfContextOwner::GetScreenExt is used to define rectangle that can invoke Touch Keyboard.
https://docs.microsoft.com/en-us/windows/win32/api/msctf/nf-msctf-itfcontextowner-getscreenext
## Validation Steps Performed
* [x] Touch keyboard was invoked by tapping inside the Console while Hardware Keyboard was not attached.
* [x] Selecting text worked as expected without invoking touch keyboard.
* [x] Long tapping the console invoked Touch Keyboard. I would like to confirm if this is the expected behavior.
## Summary of the Pull Request
In `settings.json` there's an `actions` array to configure keybindings.
The action `globalSummon` has an argument called `dropdownDuration`.
The settings editor deleted this argument from the settings because of a typo in `ActionArgs.h`.
## PR Checklist
* [x] Closes#11400
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
There was a `JsonUtils::GetValueForKey` instead of a `JsonUtils::SetValueForKey`.
This is what happens when such code is not autogenerated.
## Validation Steps Performed
None
## Summary of the Pull Request
Fixes the "Reset to inherited value" button for the opacity slider and removes the unwanted padding between the header and the control.
## PR Checklist
* [x] Closes#11352
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Manually tested
## Summary of the Pull Request
The code saved `args.DropdownDuration()` to a local and then called the function again, instead of using the local.
Changed to use the local.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
I think this getter simply accesses a member on `args`, it doesn't parse the settings or anything, so compiler optimizes it, but seemed to make more sense to use the local.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Try to save the working directory if we know what it is (just copied what was done in duplicating a pane). I overlooked this in my original implementation that always used the settings StartingDirectory.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#9800
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tried setting the working directory using the OSC 9;9 escape and confirmed that the directory saves correctly.
## Summary of the Pull Request
The type of the `"id"` argument of the `focusPane` action under `"actions"` in the `settings.json` schema was incorrectly set to a string.
It's actually expecting a non-negative number, and defaults to 0.
So I fixed the schema.
## PR Checklist
* [x] Closes#11393
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I've validated that a string makes Windows Terminal complain it's a string and not a number, and that a number works as expected, and that the default is indeed zero.
This commit introduces a number of poor abstractions to split
`SettingsLoader::_parse` into `_parse` for content in the format of the user's
settings.json and `_parseFragment` which is specialized for fragment files.
The latter suppresses exceptions and supports the "updates" key for profiles.
## PR Checklist
* [x] Closes#11330
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Wrote the following to
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments\test\test.json`:
```json
{
"profiles": [
{
"name": "bad",
"unfocusedAppearance": ""
},
{
"name": "good"
},
{
"updates": "{574e775e-4f2a-5b96-ac1e-a2962a402336}",
"background": "#333"
}
]
}
```
* Ensured that "bad" is ignored ✔️
* Ensured that "good" shows up and works ✔️
* Ensured that the pwsh profile has a gray background ✔️
Just like in #9760, we can't actually use the UWP file picker API, because it will absolutely not work at all when the Terminal is running elevated. That would prevent the picker from appearing at all. So instead, we'll just use the shell32 one manually.
This also gets rid of the confirmation dialog, since the team felt we didn't really need that. We could maybe replace it with a Toast (#8592), but _meh_
* [x] closes#11356
* [x] closes#11358
* This is a lot like #9760
* introduced in #11062
* megathread: #9700
## Summary of the Pull Request
The deadlock was caused by `ScreenInfoUiaProviderBase::GetSelection()` calling `TermControlUiaProvider::GetSelectionRange` (both of which attempted to lock the console). This PR removes the lock and initialization check from `TermControlUiaProvider`. It is no longer necessary because the only one that calls it is `SIUPB::GetSelection()`.
Additionally, this adds some code that was useful in debugging this race condition. That should help us figure out any locking issues that may come up in the future.
## References
#11312Closes#11385
## Validation Steps Performed
✅ Repro steps don't cause hang
## Summary of the Pull Request
Similar to `vswhere -latest`, show only the latest Visual Studio command prompts / developer PowerShell. This was tested by deleting the local package state and testing against fresh state with both VS2019 and VS2022 Preview installed, and indeed VS2022 Preview (both cmd and powershell) show. The other profiles were generated but hidden by default.
## References
Modification of PR #7774
## PR Checklist
* [x] Closes#11307
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
The sort algorithm is the same basic algorithm I used in https://github.com/microsoft/vswhere. It sorts first by installation version with a secondary sort based on the install date in case the installation versions are the same.
## Validation Steps Performed
With both VS2019 and VS2022 Preview installed, I made sure the initial state was expected, and tried different combinations of hiding and unhiding generated entries, and restarted Terminal to make sure my settings "stuck".
All these controls didn't have `Name`s assigned, and Accessibility Insights doesn't like that. Their parents did, but the actual focusable elements themselves didn't. So I've just taken the nearby headers for these things and slapped them in as the Automation names for these controls.
I verified that each of these automated tests in Accessibility Insights pass again.
* Will do the thing to #11155 but we need confirmation before that can be closed.
DESPITE the fact that there's a `Background()` API that we
could just call like:
```c++
TabViewItem().Background(deselectedTabBrush);
```
We actually can't, because it will make the part of the tab that
doesn't contain the text totally transparent to hit tests. So we
actually _do_ still need to set `TabViewItemHeaderBackground` manually.
* Regressed in #11240
* Root cause up in https://github.com/microsoft/microsoft-ui-xaml/pull/3769
* [x] closes#11294
Missed this in #11180. I forgot to init the BG opacity with the renderer on startup, because that matters when you have `"antialiasingMode": "cleartype",`.
Repro json
```json
{
"commandline": "cmd.exe",
"guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
"hidden": false,
"opacity": 35,
"antialiasingMode": "cleartype",
"padding": "0",
"name": "Command Prompt"
},
```
* [x] Fixes#11315
## Summary of the Pull Request
This replaces the `GridLines` enum in the renderers with a `til::enumset` type, avoiding the need for the various `WI_IsFlagSet` macros and flag operators.
## References
This is followup to PR #10492 which introduced the `enumset` class.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Validation Steps Performed
I've manually confirmed that all the different gridlines are still rendering correctly in both the GDI and DX renderers.
This logic was seemingly redundant. There's two cases I'm looking at here:
#### Case 1
```jsonc
"defaults":
{
"opacity": 35
},
"list":
[
{
"commandline": "cmd.exe",
"name": "Command Prompt"
},
```
In this case, we wouldn't set the `TerminalSettings` Opacity to .35, we'd set it to 1.0, because the profile didn't have an `opactity`.
#### Case 2
```jsonc
"defaults":
{
"useAcrylic": true
},
"list":
[
{
"commandline": "cmd.exe",
"name": "Command Prompt"
},
```
In this case we still want to have an acrylic effect. Previously, we'd default this effect to 50% opaque. I'm not sure that we can actually get that anymore. BUT it turns out, we _can_ have 100% opacity and HostBackdropAcrylic. It is very subtle, but is maybe something we should be allowing anyways. It kinda looks like:
* [x] Fixes#11355
* [x] Regressed in #11180
* [x] I work here
* [x] Fixes a bunch of the checkboxes in #11352
* [x] Fixes one of the boxes in #11353
* [x] The opacity warning -> error gibberish was fixed with the change to `DeserializationError` - `asCString` only works if the `JsonValue` is a string already.
This fixes two issues with profiles.schema.json:
* The `$schema` should not end in a `#`
* `$defs` is the official reserved keyword for schema re-use
See: http://json-schema.org/draft/2020-12/json-schema-core.html
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [x] Schema updated
## Validation Steps Performed
The previous schema didn't pass https://jschon.dev/, the new schema does.
This commit adds the ability to interact with subtrees of panes.
Have you ever thought that you don't have enough regression testing to
do? Boy do I have the PR for you! This breaks all kinds of assumptions
about what is or is not focused, largely complicated by the fact that a
pane is not a proper control. I did my best to cover as many cases as I
could, but I wouldn't be surprised if there are some things broken that
I am unaware of.
Done:
- Add `parent` and `child` movement directions to move up and down the
tree respectively
- When a parent pane is selected it will have borders all around it in
addition to any borders the children have.
- Fix focus, swap, split, zoom, toggle orientation, resize, and move to
all handle interacting with more than one pane.
- Similarly the actions for font size changing, closing, read-only, clearing
buffer, and changing color scheme will distribute to all children.
- This technically leaves control focus on the original control in the
focused subtree because panes aren't proper controls themselves. This
is also used to make sure we go back down the same path with the
`child` movement.
- You can zoom a parent pane, and click between different zoomed
sub-panes and it won't unzoom you until you use moveFocus or another
action. This wasn't explicitly programmed behavior so it is probably
buggy (I've quashed a couple at least). It is a natural consequence of
showing multiple terminals and allowing you to focus a terminal and a
parent separately, since changing the active pane directly does not
unzoom. This also means there can be a disconnect between what pane is
zoomed and what pane is active.
## Validation Steps Performed
Tested focus movement, swapping, moving panes, and zooming.
Closes#10733
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Continuation of https://github.com/microsoft/terminal/pull/10972 to handle multiple windows, requires that to be merged first.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Also closes#766
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Rough changelog:
Normally saving is triggered to occur every 30s, or sooner if a window is created/closed. The existing behavior of saving on last close is maintained to bypass that throttling. The automatic saving allows for crash recovery. Additionally all window layouts will be saved upon taking the `quit` action.
For loading we will check if we are the first window, that there are any saved layouts, and if the setting is enabled, and then depending on if we were given command line args or startup actions.
- create a new window for each saved layout, or
- take the first layout for our self and then a new window for each other layout.
This also saves the layout when the quit action is taken.
Misc changes
- A -s,--saved argument was added to the command line to facilitate opening all of the windows with the right settings. This also means that while a terminal session is running you can do wt -s idx to open a copy of window idx. There isn't a stable ordering of which idx each window gets saved as (it is whatever the iteration order of _peasants is), so it is just a cute hack for now.
- All position calculation has been moved up to AppHost this does mean we need to awkwardly pass around positions in a couple of unexpected places, but no solution was perfect.
- Renamed "Open tabs from a previous session" to "Open windows from a previous session". (not reflected in video below)
- Now save runtime tab color and window names
- Only enabled for non-elevated windows
- Add some change tracking to ApplicationState
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
`SettingsLoader::_parse` used to skip profiles which didn't have either a "guid"
or "name" field, due to #9962. This is however wrong for fragment loading, as
fragments can alternatively use an "updates" field instead of guid/name.
`SettingsLoader::_parse` was updated to allow profiles with this alternative
field during fragment loading.
## PR Checklist
* [x] Closes#11331
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Wrote the following to
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments\test\test.json`:
```json
{
"profiles": [
{
"updates": "{574e775e-4f2a-5b96-ac1e-a2962a402336}",
"background": "#FFD700"
}
]
}
```
## Summary of the Pull Request
This introduces a new TIL class that is equivalent in functionality to a `std::bitset`, but where the positions in the bitset are enum values. It also has a few additional methods allowing for setting and testing multiple positions at the same time. The idea is that this class could be used in place of the `WI_SetFlag` and `WI_IsFlagSet` macros when working with sets of flags.
## PR Checklist
* [x] Closes#10432
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #10432
## Validation Steps Performed
I've added a few unit tests that verify the behaviour of all the new methods that aren't part of `std::bitset`. I've also tried it out as a replacement for the `GridLines` enum used in the renderer, and confirmed that it has all the functionality needed to replace that cleanly.
This commit fixes layering of fragment profiles without an update key.
The previous CascadiaSettings deserializer first assembled all builtin
profiles and only then parsed the user's settings.json file.
This meant that even though fragment profiles were added to `_allProfiles`
unconditionally, they did get layered properly with user profiles regardless,
as user profiles were always properly layered.
The new CascadiaSettings approach since 168d28b was a direct translation of this
approach but this is incorrect: As the new approach reads user profiles first,
all inbox profiles, including fragments, must equally use proper layering,
instead of adding profiles unconditionally.
While this commit fixes the bug it maintains a regression:
Duplicate fragment profile GUIDs will not be detected and instead fragments with
identical GUID will all be added as parents to a single user profile.
I considered to fix this regression, but felt that this new behavior is better
than the old one, since a user often can't directly control installed fragments,
and is unlikely to occur in practice. This simplifies the implementation.
## PR Checklist
* [x] Closes#11323
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Fragment layering works ✔️
Ensures that command-lines constructed to invoke `wt` are escaped properly.
## PR Checklist
* [x] Closes#11273
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
This was broken in two places - when constructing the command-line in the shell extension and in `NewTerminalArgs::ToCommandline()`.
Both places now invoke a shared method to escape the command-line arguments that require it.
## Validation Steps Performed
Added a test and additionally:
* Invoked the shell extension from `D:\Downloads\With;Semicolon`.
* Added a `newWindow` action to `settings.json` as below and ensured the new window opened without erroring.
```json
{
"command":
{
"action": "newWindow",
"tabTitle": "\";foo\\"
},
"keys": "ctrl+shift+s"
}
```
Adds a check before every UIA function call to ensure the terminal (specifically the buffer) is initialized before doing work. Both the `ScreenInfoUiaProvider` and the `UiaTextRange` are now covered.
## References
Closes#11135#10971 & #11042
## Detailed Description of the Pull Request / Additional comments
Originally, I tried applying this heuristic to all the `RuntimeClassInitialize` on `UiaTextRangeBase` with the philosophy of "a range pointing to an invalid buffer is invalid itself", but that caused a regression on [MSFT 33353327](https://microsoft.visualstudio.com/OS/_workitems/edit/33353327).
`IUiaData` also has `GetTextBuffer()` return a `TextBuffer&`, which cannot be checked for nullness. Instead, I decided to add a function to `IUiaData` that checks if we have a valid state. Since this is shared with Conhost and Conhost doesn't have this issue, I simply make that function say that it's always in a valid state.
## Validation Steps Performed
- [X] Narrator can detect newly created terminals
- [X] (On Windows Server 2022) Windows Terminal does not hang on launch
Implements the following keyboard selection non-configurable key bindings:
- shift+arrow --> move endpoint by character
- ctrl+shift+left/right --> move endpoint by word
- shift+home/end --> move to beginning/end of line
- ctrl+shift+home/end --> move to beginning/end of buffer
This was purposefully done in the ControlCore layer to make keyboard selection an innate part of how the terminal functions (aka a shared component across terminal consumers).
## References
#715 - Keyboard Selection
#2840 - Spec
## Detailed Description of the Pull Request / Additional comment
The most relevant section is `TerminalSelection.cpp`, where we define how each movement operates. It's basically a giant embedded switch-case statement. We leverage a lot of the work done in a11y to perform the movements.
## Validation Steps Performed
- General cases:
- test all of the key bindings added
- Corner cases:
- `char`: wide glyph support
- `word`: move towards, away, and across the selection pivot
- automatically scroll viewport
- ESC (and other key combos) are still clearing the selection properly
I've done this process enough times that I should have written a script
to do it a while ago. This one is rough, but the whole changelog process
is pretty rough.
This script takes multiple revision ranges and produces something that
looks like a rough untranslated changelog, with indicators for how many
of the provided ranges had the same change (deduplicated by title.)
I use a process like this to build the Stable and Preview release notes
out of a set of revision ranges.
This introduces a spec for keyboard selection. This enables the user to create and update a selection without the use of a mouse or stylus.
## References
Contributes to #715
For some weird reason we sometimes receive a WM_KEYDOWN
message without vkey or scanCode if a user drags a tab.
The KeyChord constructor has a debug assertion ensuring that all KeyChord
either have a valid vkey/scanCode. This is important, because this prevents
accidential insertion of invalid KeyChords into classes like ActionMap.
## PR Checklist
* [x] Closes#11076
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Tab dragging doesn't produce assertion failures anymore ✔️
## Summary of the Pull Request
Fixes the 24 failing generated tests. 20 of them were fixed by enforcing the following rule: when moving backwards by word...
- a degenerate range moves to the beginning of the word, then to the word behind it.
- a non-degenerate range outright moves to the word behind it.
The fix was simple: if we're a degenerate range, check if we're at the beginning of the word. If not, move there. Otherwise, move to the word before it. See UiaTextRangeBase.cpp changes for implementation details.
Along the way, several misauthored tests were found:
- 2 generated tests:
- Cause: MS Word considers a line break a word delimiter. We don't use line-wrapping to distinguish two separate words.
- `MovementAtExclusiveEnd` backwards word movement tests:
- `end` will always be `writeTarget` because...
- [degenerate range case] both `start` and `end` are moved to the beginning of the word (`writeTarget`)
- [non-degenerate range case] from the `UiaTextRangeBase` bugfix, we should be moving to the word behind it.
- this misauthored test was explicitly found by fixing the bug first explained here.
## References
#10925 Word navigation testing
This commit reduces the code surface that interacts with raw JSON data,
reducing code complexity and improving maintainability.
Files that needed to be changed drastically were additionally
cleaned up to remove any code cruft that has accrued over time.
In order to facility this the following changes were made:
* Move JSON handling from `CascadiaSettings` into `SettingsLoader`
This allows us to use STL containers for data model instances.
For instance profiles are now added to a hashmap for O(1) lookup.
* JSON parsing within `SettingsLoader` doesn't differentiate between user,
inbox and fragment JSON data, reducing code complexity and size.
It also centralizes common concerns, like profile deduplication and
ensuring that all profiles are assigned a GUID.
* Direct JSON modification, like the insertion of dynamic profiles into
settings.json were removed. This vastly reduces code complexity,
but unfortunately removes support for comments in JSON on first start.
* `ColorScheme`s cannot be layered. As such its `LayerJson` API was replaced
with `FromJson`, allowing us to remove JSON-based color scheme validation.
* `Profile`s used to test their wish to layer using `ShouldBeLayered`, which
was replaced with a GUID-based hashmap lookup on previously parsed profiles.
Further changes were made as improvements upon the previous changes:
* Compact the JSON files embedded binary, saving 28kB
* Prevent double-initialization of the color table in `ColorScheme`
* Making `til::color` getters `constexpr`, allow better optimizations
The result is a reduction of:
* 48kB binary size for the Settings.Model.dll
* 5-10% startup duration
* 26% code for the `CascadiaSettings` class
* 1% overall code in this project
Furthermore this results in the following breaking changes:
* The long deprecated "globals" settings object will not be detected and no
warning will be created during load.
* The initial creation of a new settings.json will not produce helpful comments.
Both cases are caused by the removal of manual JSON handling and the
move to representing the settings file with model objects instead
## PR Checklist
* [x] Closes#5276
* [x] Closes#7421
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Out-of-box-experience is identical to before ✔️
(Except for the settings.json file lacking comments.)
* Existing user settings load correctly ✔️
* New WSL instances are added to user settings ✔️
* New fragments are added to user settings ✔️
* All profiles are assigned GUIDs ✔️
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#11083#11143
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
While testing the save/quit features a number of issues were found that were caused by poor synchronization on the monarch, resulting in various unexpected crashes. Because this uses std collections, and I didn't see any builtin winrt multithreaded containers I went with the somewhat heavy-handed mutex approach.
e.g.
- https://github.com/microsoft/terminal/pull/11083#issuecomment-916218353
- https://github.com/microsoft/terminal/pull/11083#issuecomment-916220521
- https://github.com/microsoft/terminal/pull/11143/#discussion_r704738433
This also makes it so that on quit peasants don't try to become the monarch, and the monarch closes their peasant last to prevent elections from happening.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Create many windows (hold down ctrl-shift-n) then use the quit action from peasants/the monarch to make sure everything closes properly.
[Git2Git] Merged PR 6303114: Prepare command history before COOKED_READ in tests
PR !6278637 introduced a dependency from COOKED_READ_DATA on the ability
to locate a command history for a process handle (here, `nullptr`).
The tests were blowing up because no such history had been allocated.
Closes MSFT-34812916
Closes MSFT-34813774
Closes MSFT-34815941
Closes MSFT-34817558
Closes MSFT-34817540 (Watson)
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev f7517e686447fc0469f6b83df19760dc3dafd577
This is equivalent to commit 8779249b1, but reflected from the OS repository.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a4d67e9b05039f365a1a0c58e9c63474c58073a1
Related work items: MSFT-34777060
Process exit code now shows as hex not decimal. Format specification needs length "10" not "8" because the leading '0x' generated by the # symbol counts as part of the length.
## PR Checklist
* [x] Closes annoyance at looking up process exit codes
* [x] I work here.
* [x] Checked manually
## Validation Steps Performed
- [x] Ran it, opened tab, opened another CMD tab, ran `exit <code>` and observed hex pattern
## Summary of the Pull Request
Clears selection render on paste
## PR Checklist
* [x] Closes#11227
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
Added ```_renderer->TriggerSelection(); ``` similarly to the copy action few lines up in ```CopySelectionToClipboard``` function
## Validation Steps Performed
Manually tested
* this is the same thing as #10996, but with the fix that caused us to #11031
* This includes https://github.com/microsoft/microsoft-ui-xaml/pull/3769, so we had to make some adjustments to how we handle tab colors. It works the same as before.
* Should enable #11231 to be started
* [x] Closes#10508
* [x] Closes#7133
* [x] Closes#8948
* [ ] I need to finish letting my 19H1 VM boot to make sure unpackaged still works
## Summary of the Pull Request
Adds support for vintage style opacity, on Windows 11+. The API we're using for this exists since the time immemorial, but there's a bug in XAML Islands that prevents it from working right until Windows 11 (which we're working on backporting).
Replaces the `acrylicOpacity` setting with `opacity`, which is a uint between 0 and 100 (inclusive), default to 100.
`useAcrylic` now controls whether acrylic is used or not. Setting an opacity < 100 with `"useAcrylic": false` will use vintage style opacity.
Mouse wheeling adjusts opacity. Whether acrylic is used or not is dependent upon `useAcrylic`.
`opacity` will stealthily default to 50 if `useAcrylic:true` is set.
## PR Checklist
* [x] Closes#603
* [x] I work here
* [x] Tests added/passed
* [x] https://github.com/MicrosoftDocs/terminal/pull/416
## Detailed Description of the Pull Request / Additional comments
Opacity was moved to AppearanceConfig. In the future, I have a mind to allow unfocused acrylic, so that'll be important then.
## Validation Steps Performed
_just look at it_
Adjust tools version for folks running on 2022
## PR Checklist
* [x] Closes annoyance that @lhecker and I have selfhosting VS2022
* [x] I work here
* [x] Solution built
* [x] @dhowett said something like "lol sure" in Teams.
## Summary of the Pull Request
Updates our `UiaTextRange` to no longer treat the end of the buffer as the "document end". Instead, we consider the "document end" to be the line beneath the cursor or last legible character (whichever is further down). In the event where the last legible character is on the last line of the buffer, we use the "end exclusive" position (left-most point on a line one past the end of the buffer).
When movement of any kind occurs, we clamp each endpoint to the document end. Since the document end is an actual spot in the buffer (most of the time), this should improve stability because we shouldn't be pointing out-of-bounds anymore.
The biggest benefit is that this significantly improves the performance of word navigation because screen readers no longer have to take into account the whitespace following the end of the prompt.
Word navigation tests were added to the `TestTableWriter` (see #10886). 24 of the 85 tests were failing, however, they don't seem to interact with the document end, so I've marked them as skip and will fix them in a follow-up. This PR is large enough as-is, so I'm hoping I can take time in the follow-up to clean some things on the side (aka `preventBoundary` and `allowBottomExclusive` being used interchangeably).
## References
#7000 - Epic
Closes#6986Closes#10925
## Validation Steps Performed
- [X] Tests pass
- [X] @codeofdusk has been personally testing this build (and others)
When we're elevated, we disable drag/dropping tabs when elevated, because of a platform limitation that causes the app to _crash_ (see #4874). However, if the user has UAC disabled, this actually works alright. So I'm adding it back in that case.
I'm not positive if this is the best way to check if UAC is disabled, but normally, you'll get a [`TokenElevationTypeFull`] when elevated, not `TokenElevationTypeDefault`. If the app is elevated, but there's not a split token, that kinda implies there's no user account separation. If I'm wrong, it's just code, let's replace this with something that does work.
## Validation Steps Performed
Booted up a Win10 VM, set `enableLUA` to `0`, rebooted, and checked if this exploded. It didn't.
References #4874
References #3581
Work done in pursuit of #11096Closes#7754
[`TokenElevationTypeFull`]: https://docs.microsoft.com/en-us/windows/win32/api/winnt/ne-winnt-token_elevation_type
This commit aligns the COM-consuming code in VsSetupInstance with best
practices such as passing COM pointers by pointer when they do not need
to be owning references and not using `const` on members, as well as
cleans up some dead code.
Leonard contributed clang-tidy fixes and some reference passing
changes.
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
This commit adds dynamic profile generators for Visual Studio Developer
Command Prompt (VS2017+) and Visual Studio Developer PowerShell
(VS2019.2+)
Tested manually by deploying locally. My local environment has four
instances of VS installed, one VS2017 and multiple channels of VS2019.
We're wrapping the COM Visual Studio Setup Configuration API to query
for VS instances and retrieve the relevant properties. Two different
namespaces are used so the end-user can turn off one or the other. For
instance, end user may prefer to always use Developer PowerShell.
## Validation Steps Performed
1. Build locally using Visual Studio 2019
2. Deploy CascadiaPackage
3. Verify entries exist in profiles menu
4. Verify entries exist in settings.json
5. Open each profile
6. Validate start-in directory
7. Validate environment variables are as expected
8. Uninstall Windows Terminal - Dev package
9. Repeat.
Closes#3821
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds directional modifiers for SplitState and convert those to the appropriate horizontal/vertical when splitting a pane.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4340
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
"vertical" and "horizontal" splits were removed from `defaults.json`, but code was added to parse those as `right` and `down` respectively. It is also the case that if a user has a custom hotkey for `split: vertical` it will override the default for `split: right`.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Split the pane using each of the new directional movements
## Summary of the Pull Request
Fixes the serialisation of the findMatch action so that the direction is stored.
## PR Checklist
* [x] Closes#11225
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Added a test and tested manually.
This PR simply replaces all uses of "TrayIcon" and "Tray" with "NotificationIcon" and "NotificationArea" to be more accurate. Originally I kinda wanted to only replace all occurrences of it in settings and user facing things, but I figured I might as well make it consistent throughout all of our code.
Fix infinite loop when trying to summon a window after close.
In #10972 code was added to try to clean up state manually when a window
was closed instead of waiting for it to be detected as a dead peasant.
Unfortunately I didn't know any better and missed cleaning up
`_mruPeasants` as well. The result is there would be an infinite loop
in `_getMostRecentPeasant` since `_getPeasant` will only clean up ids if
it finds a peasant, not if it doesn't find anything. This is the minimal
change to get this working, but it might be a good idea to make
`_getPeasant` be more thorough about cleanup.
## Validation Steps Performed
Tested that before the change we infinitely loop, and after the change
we summon correctly.
Closes#11215
This pull request moves us to Microsoft.Windows.CppWinRT 2.0.210825.3.
Notable improvements from 2.0.210309.3:
* Restored Windows 7 functionality
* C++20 ranges support
* `capture` now works with a raw pointer
* `hstring::starts_with` and `hstring::ends_with` (C++20)
Unit/Functional Tests:
Summary: Total=7728, Passed=7571, Failed=10, Blocked=0, Not Run=0, Skipped=147
Local Tests:
Summary: Total=163, Passed=158, Failed=5, Blocked=0, Not Run=0, Skipped=0
The above failures are (1) in UIA tests for conhost/WT (which do not work here) or
(2) in already known-broken local tests.
## Summary of the Pull Request
Basically undoes #10988 in favour of implementing it as described in #11018
## PR Checklist
* [x] Closes#11018
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [X] Schema updated.
* [x] I work here
## Validation Steps Performed
- alt+space opens the system menu by default
- when alt+space is bound, the keys do not get send to terminal
- right-click on the tab bar didn't break (still opens system menu at the location of the cursor)
## Summary of the Pull Request
* Introduces info bar shown upon session failure,
that guides the user how to configure termination behavior
* Allows this info bar to be dismissed permanently (choice stored in state)
* Allows "keyboard service" info bar to be dismissed permanently
## PR Checklist
* [x] Closes#10798, #8699
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
UI:
* Introduce an additional info bar for "close on exit" configuration tip
* Stack this bar after "keyboard service" bar
* Add "Don't show again" button to both bars
Dismiss Permanently:
* Introduce a set of "dismissed messages" to the Application State
* Add verification the message is not dismissed before showing an info bar
* "Don't show again" persists the choice under "dismissed messages"
Wiring the Info Bar:
* Register `TerminalPage` on `TermControl`'s `ConnectionStateChanged` event
* Once event is triggered check whether the state is failure
* If so and the message was not dismissed permanently, show the info bar
Add the ability to quit all terminal instances. Doing this separately from the window layout saving ones to lessen the number of 1k+ line monsters I make y'all review.
## References
#11083
## PR Checklist
* [x] Closes#11081
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
## Detailed Description of the Pull Request / Additional comments
- Warn the user before they do so to give a chance to cancel
- Percolate a QuitAll event up to the monarch who then directs each peasant to clsoe.
- Leave a window-layout-saving-sized hole to add that feature on top
## Validation Steps Performed
- quit with one window (from the monarch)
- quit from the monarch with multiple windows
- quit from a peasant
- cancel the quit dialog
This PR adds support for the `DECRQSS` (Request Selection or Setting)
escape sequence, which is a standard VT query for reporting the state of
various control functions. This initial implementation only supports
queries for the `DECSTBM` margins, and the `SGR` graphic rendition
attributes.
This can be useful for certain forms of capability detection (#1040). As
one example in particular, it can serve as an alternative to the
`COLORTERM` environment variable for detecting truecolor support
(#11057).
Of the settings that can be queried by `DECRQSS`, the only other one
that we could be supporting at the moment is `DECSCUSR` (Cursor Style).
However, that would require passing the query through to the conpty
client, which is a lot more complicated, so I thought it best to leave
for a future PR.
For now this gets the basic framework in place, so we are at least
responding to queries, and even just supporting the `SGR` attributes
query is useful in itself.
Validation
----------
I've added a unit test verifying the reports for the `DECSTBM` and `SGR`
settings with a range of different parameters. I've also tested the
`DECSTBM` and `SGR` reports manually in _Vttest_, under menu 11.2.5.3.6
(Status-String Reports).
This commit adds initial support for saving window layout on application
close.
Done:
- Add user setting for if tabs should be maintained.
- Added events to track the number of open windows for the monarch, and
then save if you are the last window closing.
- Saves layout when the user explicitly hits the "Close Window" button.
- If the user manually closed all of their tabs (through the tab x
button or through closing all panes on the tab) then remove any saved
state.
- Saves in the ApplicationState file a list of actions the terminal can
perform to restore its layout and the window size/position
information.
- This saves an action to focus the correct pane, but this won't
actually work without #10978. Note that if you have a pane zoomed, it
does still zoom the correct pane, but when you unzoom it will have a
different pane selected.
Todo:
- multiple windows? Right now it can only handle loading/saving one
window.
- PR #11083 will save multiple windows.
- This also sometimes runs into the existing bug where multiple tabs
appear to be focused on opening.
Next Steps:
- The business logic of when the save is triggered can be adjusted as
necessary.
- Right now I am taking the pragmatic approach and just saving the state
as an array of objects, but only ever populate it with 1, that way
saving multiple windows in the future could be added without breaking
schema compatibility. Selfishly I'm hoping that handling multiple
windows could be spun off into another pr/feature for now.
- One possible thing that can maybe be done is that the commandline can
be augmented with a "--saved ##" attribute that would load from the
nth saved state if it exists. e.g. if there are 3 saved windows, on
first load it can spawn three wt --saved {0,1,2} that would reopen the
windows? This way there also exists a way to load a copy of a previous
window (if it is in the saved state).
- Is the application state something that is planned to be public/user
editable? In theory the user could since it is just json, but I don't
know what it buys them over just modifying their settings and
startupActions.
Validation Steps Performed:
- The happy path: open terminal -> set setting to true -> close terminal
-> reopen and see tabs. Tested with powershell/cmd/wsl windows.
- That closing all panes/tabs on their own will remove the saved
session.
- Open multiple windows, close windows and confirm that the last window
closed saves its state.
The generated file stores a sequence of actions that will be executed to
restore the terminal to its saved form.
References #8324
This is also one of the items on microsoft/terminal#5000Closes#766
## Summary of the Pull Request
Make sure to always synchronously set the selected tab. This way when changing tabs while running multiple actions further calls to _GetFocusedTab will return the correct one.
**Edit** #11146 discovered while trying to test this so while I fixed the case I wanted, things seem to be broken generally so it is hard for me to test if I broke anything else.
## References
## PR Checklist
* [x] Closes#11107
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Ran the command specified in the issue and confirmed that the correct tab was focused and that the correct pane was zoomed.
## Summary of the Pull Request
Disables autocorrect for command, path and find text inputs. Does not disable it for profile names, tab titles or colour scheme names.
## PR Checklist
* [x] Closes#11133
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Manually typed `bash -i -l` into the profile command text input and found it no longer auto-capitalised the I.
## Summary of the Pull Request
This adds a new action, `clearBuffer`. It accepts 3 values for the `clear` type:
* `"clear": "screen"`: Clear the terminal viewport content. Leaves the scrollback untouched. Moves the cursor row to the top of the viewport (unmodified).
* `"clear": "scrollback"`: Clear the scrollback. Leaves the viewport untouched.
* `"clear": "all"`: (**default**) Clear the scrollback and the visible viewport. Moves the cursor row to the top of the viewport (unmodified).
"Clear Buffer" has also been added to `defaults.json`.
## References
* From microsoft/vscode#75141 originally
## PR Checklist
* [x] Closes#1193
* [x] Closes#1882
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is a bit tricky, because we need to plumb it all the way through conpty to clear the buffer. If we don't, then conpty will immediately just redraw the screen. So this sends a signal to the attached conpty, and then waits for conpty to draw the updated, cleared, screen back to us.
## Validation Steps Performed
* works for each of the three clear types as expected
* tests pass.
* works even with `ping -t 8.8.8.8` as you'd hope.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Make it so you can navigate pane focus without unzooming.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7215
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
- Slight refactor to bring the MRU pane logic into the `NavigateDirection` function
- The actual zoom behavior was not a problem, the only issue is that because most of the panes weren't in the UI tree I had to disable using the actual sizes. There is nothing wrong with that, since the synthetic sizing is required anyways, but I'm curious what other peoples' thoughts are.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
Remove those imports as they are unnecessary, _template.py_ contains these too but I guess it's fine since it's a template after all
## Summary of the Pull Request
**Naive implementation** of exporting the text buffer of the current pane
into a text file triggered from the tab context menu.
**Disclaimer: this is not an export of the command history,**
but rather just a text buffer dumped into a file when asked explicitly.
## References
Should provide partial solution for #642.
## Detailed Description of the Pull Request / Additional comments
The logic is following:
* Open a file save picker
* The location is Downloads folder (should be always accessible)
* The suggest name of the file equals to the pane's title
* The allowed file formats list contains .txt only
* If no file selected stop
* Lock terminal
* Read all lines till the cursor
* Format each line by removing trailing white-spaces and adding CRLF if not wrapped
* Asynchronously write to selected file
* Show confirmation
As the action is relatively fast didn't add a progress bar or any other UX.
As the buffer is relatively small, holding it entirely in the memory rather than
writing line by line to disk.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add a new action that can contain multiple other actions.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#3992
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Creates a shortcut action that allows a list of actions to be specified as arguments. Steals a bunch of the serialization code from my other pr. Overall, because I had the serialization code written already, this was remarkably easy.
I can't think of any combined action to be added to the defaults, so I think this is just a thing for the documentation unless someone else has a good example. I know there are lot of times when the recommended workaround is "make an action with commandline wt.exe ..." and this could be a good replacement for that, but that is all personalized.
I didn't add this to the command line parsing, since the command line is already a way to run multiple actions.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Created a new command, confirmed that "Move right->down" showed up in the command palette, and that running it did the correct behavior (moving right one pane, then down one pane).
```
{
"command": {
"action": "multipleActions",
"name": "Move right->down",
"actions": [
{"action": "moveFocus", "direction": "right" },
{"action": "moveFocus", "direction": "down" },
]
}
}
```
The first time you open commandline mode, `recentCommands` doesn't exist yet. However, we immediately try to read the `Size()` in a couple places. This'll A/V and we'll crash 😨
The fix is easy - don't try and read the size of the non-existent `recentCommands`
Found this while playing with #11069
Regressed in #11030
Didn't bother filing an issue for it when I have the fix in hand
This update fixes some minor ligature issues, font selection issues and
a problem with the Hebrew letter Vav when combined with Holam.
See microsoft/cascadia-code#538 for more details.
This is on me. When I got rid of the `_updatePatternLocations` `ThrottledFunc` in the `TermControl`, I didn't add a matching call to `_updatePatternLocations->Run()` in this method.
In #9820, in `TermControl::_ScrollPositionChanged`, there was still a call to `_updatePatternLocations->Run();`. (TermControl.cpp:1655 on the right) https://github.com/microsoft/terminal/pull/9820/files#diff-c10bb023995e88dac6c1d786129284c454c2df739ea547ce462129dc86dc2697R1654#10051 didn't change this
In #10187 I moved the `_updatePatternLocations` throttled func from termcontrol to controlcore. Places it existed before:
* [x] `TermControl::_coreReceivedOutput`: already matched by ControlCore::_connectionOutputHandler
* [x] `TermControl::_ScrollbarChangeHandler` -> added in c20eb9d
* [x] `TermControl::_ScrollPositionChanged` -> `ControlCore::_terminalScrollPositionChanged`
## Validation Steps Performed
Print a URL, scroll the wheel: it still works.
Closes#11055
This commit adds the ability to target the first pane in the tree,
always.
I wasn't able to find an existing issue for this, it is just a personal
feature for me. I won't be heartbroken if it does not get merged.
As motivation, I frequently have setups where the thing I am primarily
working on is a large pane on the left and everything else is in smaller
panes positioned elsewhere. I like to have one hotkey where I can go to
any pane and then make it the "primary" pane if I am changing what I am
working on or need to focus on another set of code/documentation/etc.
## Validation Steps Performed
Confirmed that the move focus and swap pane variants both affect the
correct pane.
Moves PGO runs to supported Helix pools. We need to match Microsoft-UI-XAML on which Helix pools we used for each type of activities.
## PR Checklist
* [x] Closes#10850
* [x] I work here
* [x] If it builds, it sits.
## Validation Steps Performed
* [x] Run PGO build against this branch
When moving a pane to a new tab previously we removed the event handlers
on it as if we were closing it, but we are just moving it so we need to
keep them.
I tried really hard to make sure all of the events were hooked up
correctly, but I guess I missed these originally since they are normally
created in the Pane constructor.
Closes#11035
## Validation Steps Performed
created panes, moved them to new tabs, confirmed that they close and
ding appropriately.
This pull request introduces our first use of the "base" profile as an
actual profile. Incoming commandlines from `wt foo` *and* default
terminal handoffs will be hosted in the base profile.
**THIS IS A BREAKING CHANGE** for user behavior.
The original behavior where commandlines were hosted in the "default"
profile (in most cases, Windows PowerShell) led to user confusion: "why
does cmd use my powershell icon?" and "why does the title say
PowerShell?". Making this change unifies the user experience so that we
can land commandline detection in #10952.
Users who want the original behavior can get it back for commandline
invocation by specifying a profile using the `-p` argument, as in `wt -p
PowerShell -- cmd`.
As a temporary stopgap, users who attempt to duplicate the base profile
will get their specified default profile until we land #5047.
This feature is hidden behind the same feature flag that controls the
visibility of base/"Defaults" in the settings UI.
Fixes#10669
Related to #6776
Only focus if there is a control to focus (which may be null if e.g. the focused tab is being destroyed)
Closes#11037
## Additional comments
I tried to remove the _activePane = nullptr in `TerminalTab::DetachPane` but that actually completely broke being able to focus the control at all making the tab completely unusable. Focus does seem to transfer just fine here with this change.
## Validation Steps Performed
Used the command execution to move panes to and from existing panes, including new tabs and destroying tabs.
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/1032-elevation-qol/doc/specs/%235000%20-%20Process%20Model%202.0/%231032%20-%20Elevation%20Quality%20of%20Life%20Improvements.md) ⇐
## Summary of the Pull Request
Despite my best efforts to mix elevation levels in a single Terminal window, it seems that there's no way to do that safely. With the dream of mixed elevation dead, this spec outlines a number of quality-of-life improvements we can make to the Terminal today. These should make using the terminal in elevated scenarios better, since we can't have M/E.
### Abstract
> For a long time, we've been researching adding support to the Windows Terminal
> for running both unelevated and elevated (admin) tabs side-by-side, in the same
> window. However, after much research, we've determined that there isn't a safe
> way to do this without opening the Terminal up as a potential
> escalation-of-privilege vector.
>
> Instead, we'll be adding a number of features to the Terminal to improve the
> user experience of working in elevated scenarios. These improvements include:
>
> * A visible indicator that the Terminal window is elevated ([#1939])
> * Configuring the Terminal to always run elevated ([#632])
> * Configuring a specific profile to always open elevated ([#632])
> * Allowing new tabs, panes to be opened elevated directly from an unelevated
> window
> * Dynamic profile appearance that changes depending on if the Terminal is
> elevated or not. ([#1939], [#8311])
## PR Checklist
* [x] Specs: #1032, #632
* [x] References: #5000, #4472, #2227, #7240, #8135, #8311
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
### Why are these two separate documents?
I felt that the spec that is currently in review in #7240 and this doc should remain separate, yet closely related documents. #7240 is more about showing how this large set of problems discussed in #5000 can all be solved technically, and how those solutions can be used together. It establishes that none of the proposed solutions for components of #5000 will preclude the possibility of other components being solved. What it does _not_ do however is drill too deeply on the user experience that will be built on top of those architectural changes.
This doc on the other hand focuses more closely on a pair of scenarios, and establishes how those scenarios will work technically, and how they'll be exposed to the user.
- When deciding whether to call `_AnalyzeFontFallback`, also check if the user set any font axes
- Do not use the user set weight if we are setting the weight due to the bold attribute
- When calling `FontFaceWithAttribute`, check if the user set the italic axis as well as the text attribute
* [x] Closes#10852
* [x] Closes#10853
It was insufficient to only promote commandline components to titles
during commandline parsing, because we also have a whole complement of
actions that contain NewTerminalArgs. The tests caught me out a little
too late (sorry!). I decided it was better move promotion down to
TerminalSettings.
Fixes#6776
Re-implements #10998
During startup we do not have real dimensions, so we have to guess what
our dimensions should be based off of the splits.
We'll augment the state of the pane search to also have a size in each
dimension that gets incrementally upgraded as we recurse through the
tree.
References #10978
If both of the following are true
1. alt+space is not explicitly unbound
2. alt+space is not bound to a command
Then the window procedure will handle the alt+space to open up the context menu.
In this case, we need to make sure we don't send the keys to terminal.
Closes#10935
## Summary of the Pull Request
Follow-up for #10886. The new UIA movement tests found some failing cases. This PR fixes UiaTextRangeBase to have movement match that of MS Word. In total, this fixes 64 tests.
## PR Checklist
* [X] Closes#10924
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
Root causes include...
1. if we were a non-degenerate range and we failed to move, we should still expand to enclose the unit
2. non-degenerate ranges are treated as if they already encompassed their given unit.
- this one is a bit difficult to explain. Consider these examples:
1. document movement
- state: you have a 1-cell wide range on the buffer, and you try to move by document
- result: move by 0 (there is no next/prev document), but the range now encompasses the entire document
2. line movement
- state: you have a 1-cell wide range on a line, and you try to move back by a line
- result: you go to the previous line (not the beginning of this line)
- conversely, a degenerate range successfully moves to the beginning/end of the current unit (i.e. document/line)
- this (bizarre) behavior was confirmed using MS Word
As a bonus, occasionally, Narrator would get stuck when navigating by line. This issue now seems to be fixed.
## Updates to existing tests
- `CanMoveByCharacter`
- `can't move backward from (0, 0)` --> misauthored, result should be one character wide.
- `can't move past the last column in the last row` --> misauthored and already covered in generated tests
- `CanMoveByLine`
- `can't move backward from top row` --> misauthored, end should be on next line. Already covered by generated tests
- `can't move forward from bottom row` --> misauthored, end should be on next line
- `can't move backward when part of the top row is in the range` --> misauthored, should expand
- `can't move forward when part of the bottom row is in the range` --> misauthored, degenerate range moves to end of buffer
- `MovementAtExclusiveEnd`
- populate the text buffer _before_ we do a move by word operation
- update to match the now fixed behavior
This PR converts the WSL distro generator to use the registry to lookup
WSL distros instead of trying to parse the results of `wsl.exe`.
`wsl.exe` sometimes takes a very long time to launch the WSL service,
which means that on the first launch of the Terminal, WSL distros can
sometimes be missing entirely!
## References
* Also related is #6160, but I feel that deserves a separate PR for
warning when the default profile is a dynamic profile who's source
indicated it was gone.
## PR Checklist
* [x] Closes#9905
* [x] Closes#7199
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is maybe a little BODGY, but hey we get tons of reports of this
root cause.
## Validation Steps Performed
Ran it locally, it did well. Ran a `wsl --shutdown`, then booted the
terminal - seemed to do well. I never was able to repro the slowness
myself, but I'd suspect this'll fix it.
## Summary of the Pull Request
Since the days immemorial of the Terminal, the TermControl has auto-focused itself when it finalizes its layout. This has led to the problem that `wt ; sp ; sp ; sp...` ends up focusing one of these panes at random.
This PR fixes this issue by getting rid of the auto-focusing. Panes now manually get focused when created. We manually focus the active pane when a commandline is dispatched. since we're internally tracking "active" separate from "focused", this ends up working as you'd hope.
## References
## PR Checklist
* [x] Closes#6586
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I also had to turn the cursor off by default. Most `TermControl`s would never get the `LostFocus` event, so their cursors would get left `On`, and that's not right.
## Validation Steps Performed
I've run the following things a bunch of times to make sure they work:
* `wtd sp ; sp ; sp`
* `wtd sp ; sp ; sp ; fp -t 0`
* `newTab`
* `splitPane`
* use the command palette to do the above as well
Where the result used to be random (cases 1 & 2), the result is exactly what you'd expect now.
It doesn't work at all for
```
wtd sp ; sp ; sp ; mf left
```
Presumably because we can't `move-focus` directionally during startup. However, that doesn't work _today_ either, so it's not making it worse. Just highlights that single scenario doesn't work right.
* Perform the handling of partial code points in the `u8u16` and `u16u8`
conversion functions without preparation in a preliminary buffer.
* Simplify partials handling in `u8u16` (perf).
* Declare the parameters for the incoming data as referenced
string_views.
* Simplify templatization.
* Simplify exception handling.
We complete the partial codepoint in the 4-bytes long cache and convert
it separately. This makes the cache ready for capturing the next
partials before the remaining string is converted. This way, we neither
need to copy the whole string into a buffer which contains complete
codepoints, nor do we need to allocate an unnecessarily long buffer
which exists for the life time of the state class instance.
Finding and capturing of partials is performed in a more linear code
using the evaluation of the length of a code point.
The parameters for the incoming data are now explicitely declared to be
referenced string_views.
`CATCH_RETURN` is used to improve the readability of the code.
## Validation Steps Performed
* manually tested
* unit tests passed
Closes#10946
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
Re-enables the delete button for generated profiles in the settings UI.
Additionally fixes "Startup Profiles" to only list active profiles.
Profiles are considered deleted if they're absent from settings.json, but their
GUID has been encountered before. Or in other words, from a user's perspective:
Generated profiles are added to the settings.json automatically only once.
Thus if the user chooses to delete the profile (e.g. using the delete button)
they aren't re-added automatically and thus appear to have been deleted.
Meanwhile those generated profiles are actually only marked as "hidden"
as well as "deleted", but still exist in internal profile lists.
The "hidden" attribute hides them from all existing menus. The "deleted" one
hides them from the settings UI and prevents them from being written to disk.
It would've been preferrable of course to just not generate and
add deleted profile to internal profile lists in the first place.
But this would've required far more wide-reaching changes.
The settings UI for instance requires a list of _all_ profiles in order to
allow a user to re-create previously deleted profiles. Such an approach was
attempted but discarded because of it's current complexity overhead.
## References
* Part of #9997
* A sequel to 5d36e5d
## PR Checklist
* [x] Closes#10960
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* "Startup Profiles" doesn't list deleted profiles ✔️
* Manually removing an item from settings.json removes the profile ✔️
* Removing cmd.exe and saving doesn't create empty objects (#10960) ✔️
* "Add a new profile" lists deleted profiles ✔️
* "Duplicate" recreates previously deleted profiles ✔️
* Profiles are always created with GUIDs ✔️
The original code for settings reload iterated the entire tree of panes
for every profile in the new settings (O(mn)) and constructed a
TerminalSettings object for every profile even if it later went unused.
This implementation:
1. Collects all new profiles keyed by guid
1.a. Adds the "defaults" profile to the map
2. Iterates every pane, just once, and updates its profile if it shows
up in the list by GUID.
I've merged all of the per-tab code into a single loop.
Because of 1.a., this code can now update panes that are hosting the
"base" profile.
Right now, we store GUIDs in panes and most of the functions for interacting
with profiles on the settings model take GUIDs and look up profiles.
This pull request changes how we store and look up profiles to prefer profile
objects. Panes store strong references to their originating profiles, which
simplifies settings lookup for CloseOnExit and the bell settings. In fact,
deleting a pane's profile no longer causes it to forget which CloseOnExit
setting applies to it. Duplicating a pane that is hosting a deleted profile
(#5047) now duplicates the profile, even though it is otherwise unreachable.
This makes the world more consistent and allows us to _eventually_ support panes
hosting profiles that do not have GUIDs that can be looked up in the profile
list. This is a gateway to #6776 and #10669, and consolidating the profile
lookup logic will help with #10952.
PR #10588 introduced TerminalSettings::CreateWithProfile and made
...CreateWithProfileByID a thin wrapper over top it, which looked up the profile
by GUID before proceeding. It has also been removed, as its last caller is gone.
Closes#5047
This supports a future world where we give commandline-only invocations
their own tabs. It was easier to promote the commandline to a title at
the time of argument parsing, rather than later, but I am happy to
change this if anyone disagrees.
Add support for acrylic in the titlebar
## PR Checklist
* [x] CLA signed
## Detailed Description of the Pull Request / Additional comments
This seems to be a highly requested feature and seeing as #5772 was closed I thought it made sense to make a PR for this.
## Validation Steps Performed
Checked that acrylic works in both dark and light modes and switching between them still works. Also checked that acrylic in the tab row still works when tabs in titlebar is disabled.
Currently, the monarch window will show itself when opening the tray icon context menu. This is because a window must be set as the foreground window when the context menu opens, otherwise the menu won't be able to be dismissed when clicking outside of the context menu.
This PR makes the tray icon create a non visible/interactable window for the sole purpose of being set as the foreground window when the tray icon's context menu is opened. Then none of the terminal windows should be set as the foreground window when opening the context menu.
Closes#10936
## Summary of the Pull Request
Pretty straightforward. Check if the scroll event is a horizontal movement. If it is, ignore it. We don't have a horizontal scrollbar.
## References
* obviously, revisit this if we ever do #1860
## PR Checklist
* [x] Closes#10329
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* scrolled ↑/↓ with slaptop trackpad: terminal scrolls.
* scrolled ←/→ with slaptop trackpad: terminal doesn't scroll.
* Scrolling _slightly more vertically than horizontally_ still scrolls.
* Scrolling _slightly more horizontally than vertically_ doesn't scroll.
When our text buffer is full, newlines cause the buffer to scroll underneath the viewport (rather than the viewport moving down). This was causing selections made during text output to scroll down. To solve this, when we increment the circular buffer, we decrement the y-coordinates of the current selections by 1. We also invalidate the previous selection rects.
Closes#10319
This commit moves us from MUX 2.5 to MUX 2.6. I have temporarily
disabled the new control styles in `TerminalApp\App.xaml` by setting
`ControlsResourcesVersion` to `Version1`. There is no significant expected
visual impact.
Closes#10508
This commit partially reverts d465a47 and introduces an alternative approach by adding Hash and Equals methods to the KeyChords class. Those methods will now favor any existing Vkeys over ScanCodes.
## PR Checklist
* [x] Closes#10933
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Added a new test, which is ✔️
* Various standard commands still work ✔️
* Hash() returns the same value for all KeyChords that are Equals() ✔️
Introduces a new methodology to maintain tests for UI Automation. This includes...
- `UiaTests.csv`: an excel spreadsheet designed to store UIA movement tests in a compact format
- `GeneratedTests.ps1`: a PowerShell script that imports `UiaTests.csv` and outputs a C++ TEST_METHOD for `UiaTextRangeTests.
This new system can be used to easily add more UIA movement tests.
Read https://github.com/microsoft/terminal/blob/dev/cazamor/a11y-7000/testing/tools/TestTableWriter/README.md for more details.
Follow-up work items:
- #10924 **Failing Tests**: this found some failing tests. We should make them not fail.
- #10925 **Missing Tests: Word navigation**: Word navigation is missing.
- #10926 **MoveEndpoint Tests**: an additional column can be added to the CSV "EndpointTarget", which can be "start", "end", or "both". This will allow us to test `MoveEndpoint` in addition to `Move`.
Some followups to #10368:
- Accidentally reverted a defapp change where the Monarch should not by default register itself as a handoff server.
- Destroy the tray icon if we're a monarch otherwise if we're a quake window we request the monarch to hide the icon.
When creating `startupAction` use `TabSwitcherMode::Disabled` in action args
to disable the tab switcher and prevent MRU logic to be applied.
Closes#10070
## Summary of the Pull Request
The bug was that Narrator would still read the content of the old tab/pane although a new tab/pane was introduced. This is caused by the automation peer not being created when XAML requests it. Normally, we would prevent the automation peer from being created if the terminal was not fully initialized.
This change allows the automation peer to be created regardless of the terminal being fully initialized by...
- `TermControl`: `_InitializeTerminal` updates the padding (dependent on the `SwapChainPanel`) upon full initialization
- `ControlCore`: initialize the `_renderer` in the ctor so that we can attach the UIA Engine before `ControlCore::Initialize()` is called (dependent on `SwapChainPanel` loading)
As a bonus, this also fixes a locking issue where logging would attempt to get the text range's text and lock twice. The locking fix is very similar to #10937.
## PR Checklist
Closes [MSFT 33353327](https://microsoft.visualstudio.com/OS/_workitems/edit/33353327)
## Validation Steps Performed
- New pane from key binding is announced by Narrator
- New tab from key binding is announced by Narrator
Adds new in-order traversal for MoveFocus and SwapPane actions.
Refactors the Pane methods to share a `NavigateDirection`
implementation.
Closes#10909
A large amount of the churn here is just renaming some of the things for
directional movement to reflect that it might not always be based on the
focused pane. `NextPane` and `PreviousPane` are the functions that
actually select the next/previous pane respectively and are the core
component of this PR.
VALIDATION
Created multiple panes on a tab, and tried both forward and backwards
movements with move-focus and swap-pane.
## Summary of the Pull Request
This adds a new setting `intenseTextStyle`. It's a per-appearance, control setting, defaulting to `"all"`.
* When set to `"all"` or `["bold", "bright"]`, then we'll render text as both **bold** and bright (1.10 behavior)
* When set to `"bold"`, `["bold"]`, we'll render text formatted with `^[[1m` as **bold**, but not bright
* When set to `"bright"`, `["bright"]`, we'll render text formatted with `^[[1m` as bright, but not bold. This is the pre 1.10 behavior
* When set to `"none"`, we won't do anything special for it at all.
## references
* I last did this in #10648. This time it's an enum, so we can add bright in the future. It's got positive wording this time.
* ~We will want to add `"bright"` as a value in the future, to disable the auto intense->bright conversion.~ I just did that now.
* #5682 is related
## PR Checklist
* [x] Closes#10576
* [x] I seriously don't think we have an issue for "disable intense is bright", but I'm not crazy, people wanted that, right? https://github.com/microsoft/terminal/issues/2916#issuecomment-544880423 was the closest
* [x] I work here
* [x] Tests added/passed
* [x] https://github.com/MicrosoftDocs/terminal/pull/381
## Validation Steps Performed
<!--  -->
Yea that works. Printed some bold text, toggled it on, the text was no longer bold. hooray.
### EDIT, 10 Aug
```json
"intenseTextStyle": "none",
"intenseTextStyle": "bold",
"intenseTextStyle": "bright",
"intenseTextStyle": "all",
"intenseTextStyle": ["bold", "bright"],
```
all work now. Repro script:
```sh
printf "\e[1m[bold]\e[m[normal]\e[34m[blue]\e[1m[bold blue]\e[m\n"
```
## Summary of the Pull Request
BODGY!
This solution was suggested in https://github.com/microsoft/microsoft-ui-xaml/issues/4554#issuecomment-887815332.
When the window moves, or when a ScrollViewer scrolls, dismiss any popups that are visible. This happens automagically when an app is a real XAML app, but it doesn't work for XAML Islands.
## References
* upstream at https://github.com/microsoft/microsoft-ui-xaml/issues/4554
## PR Checklist
* [x] Closes#9320
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Unfortunately, we've got a bunch of scroll viewers in our SUI. So I did something bodgyx2 to make our life a little easier.
`DismissAllPopups` can be used to dismiss all popups for a particular UI element. However, we've got a bunch of pages with scroll viewers that may or may not have popups in them. Rather than define the same exact body for all their `ViewChanging` events, the `HasScrollViewer` struct will just do it for you!
Inside the `HasScrollViewer` stuct, we can't get at the `XamlRoot()` that our subclass implements. I mean, _we_ can, but when XAML does it's codegen, _XAML_ won't be able to figure it out.
Fortunately for us, we don't need to! The sender is a UIElement, so we can just get _their_ `XamlRoot()`.
So, you can fix this for any SUI page with just a simple
```diff
- <ScrollViewer>
+ <ScrollViewer ViewChanging="ViewChanging">
```
```diff
- struct AddProfile : AddProfileT<AddProfile>
+ struct AddProfile : public HasScrollViewer<AddProfile>, AddProfileT<AddProfile>
```
## Validation Steps Performed
* the window doesn't close when you move it
* the popups _do_ close when you move the window
* the popups close when you scroll any SUI page
Let's say a user doesn't know that they need to write `"hidden": true` in
order to prevent a profile from showing up (and a settings UI doesn't exist).
Naturally they would open settings.json and try to remove the profile object.
This section of code recognizes if a profile was seen before and marks it as
`"hidden": true` by default and thus ensures the behavior the user expects:
Profiles won't show up again after they've been removed from settings.json.
## References
#8324 - Application State
## PR Checklist
* [x] Closes#8270
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* settings.json/state.json are created if they don't exist ✔️
* Removing any profile from settings.json doesn't cause it to appear again ✔️
* Hitting save in SUI creates profiles with `"hidden": true` ✔️
* Removing a default profile and hitting save in SUI works ❌
An empty object is added instead.
Fixes a bug where interacting with Windows Terminal when using Narrator causes Windows Terminal to hang.
`UiaTextRangeBase::Move()` locks, but later calls `UiaTextRangeBase::ExpandToEnclosingUnit()` which attempts to lock again. The workaround for this is to introduce a `_expandToEnclosingUnit()` that _does not_ lock the console. Then, `Move()` calls this new method, thus only allowing one lock to be established at a time.
This bug is observed to be in v1.11.2221.0 and _not_ in v1.9.1942.0.
A brief summary of the behavior of the tray icon:
- There will only ever be one tray icon representing all windows.
- Left-Click on a Tray Icon brings up the MRU window.
- Right-Click on a Tray Icon brings up a Context Menu:
```
Focus Terminal
----------------
Windows --> Window ID 1 - <unnamed window>
Named Window
Named Window Again
```
- Focus Terminal will bring up the MRU window.
- Clicking on any of the Window "names" in the submenu will summon the window.
## Settings Changes
Two new global settings are introduced: `alwaysShowTrayIcon` and `minimizeToTray`. Here's a chart explaining the behavior with the two settings.
| | `alwaysShowTrayIcon:true` | `alwaysShowTrayIcon:false` |
|----------------------|------------------------------------------------------------------|------------------------------------------------------------------|
| `minimizeToTray:true` | tray icon is always shown. minimize button will hide the window. | tray icon is always shown. minimize button will hide the window. |
| `minimizeToTray:false` | tray icon is always shown. | tray icon is not shown ever. |
Closes#5727
## References
[Spec for Minimize to Tray](https://github.com/microsoft/terminal/blob/main/doc/specs/%23653%20-%20Quake%20Mode/%23653%20-%20Quake%20Mode.md#minimize-to-tray)
Docs PR - MicrosoftDocs/terminal#352
#10448 - My list of TODOs
Improve WriteCharsLegacy performance by increasing LocalBuffer size, allowing
longer runs of characters to be submitted to the remaining parts of conhost.
References #10563 -- vtebench tracking issue
## Validation Steps Performed
* Ran `cat big.txt`, vtebench and termbench and
noted ~5% performance improvements
WriteUTF8FileAtomic overrides the content of the file "atomically"
by creating a temp file and then renaming it to the original path.
The problem arises when the original path is symbolic link,
as the link itself gets overridden by a file (rather than the link target).
This PR introduces a special handling of the symlinks:
if the path as a symlink we resolve the path and use:
1. target's directory to create a temp-file in
2. target itself to be replaced with the tempfile.
Symlink resolution is problematic when the target path does not exist,
as there is no good utility that resolves such link (canonical() fails).
In this corner case we skip the "atomic" approach of renaming the file
and write the link target directly.
Closes#10787
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add functionality to move a pane to another tab. If the tab index is greater than the number of current tabs a new tab will be created with the pane as its root. Similarly, if the last pane on a tab is moved to another tab, the original tab will be closed.
This is largely complete, but I know that I'm messing around with things that I am unfamiliar with, and would like to avoid footguns where possible.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4587
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7075
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Things done:
- Moving a pane to a new tab appears to work. Moving a pane to an existing tab mostly works. Moving a pane back to its original tab appears to work.
- Set up {Attach,Detach}Pane methods to add or remove a pane from a pane. Detach is slightly different than Close in that we want to persist the tree structure and terminal controls.
- Add `Detached` event on a pane that can be subscribed to to remove other event handlers if desired.
- Added simple WalkTree abstraction for one-off recursion use cases that calls a provided function on each pane in order (and optionally terminates early).
- Fixed an in-prod bug with closing panes. Specifically, if you have a tree (1; 2 3) and close the 1 pane, then 3 will lose its borders because of these lines clearing the border on both children https://github.com/microsoft/terminal/blob/main/src/cascadia/TerminalApp/Pane.cpp#L1197-L1201 .
To do:
- Right now I have `TerminalTab` as a friend class of `Pane` so I can access some extra properties in my `WalkTree` callbacks, but there is probably a better choice for the abstraction boundary.
Next Steps:
- In a future PR Drag & Drop handlers could be added that utilize the Attach/Detach infrastructure to provide a better UI.
- Similarly once this is working, it should be possible to convert an entire tab into a pane on an existing tab (Tab::DetachRoot on original tab followed by Tab::AttachPane on the target tab).
- Its been 10 years, I just really want to use concepts already.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing by creating pane(s), and moving them between tabs and creating new tabs and destroying tabs by moving the last remaining pane.
The quake mode keybinding is bound to a scancode. This made it
impossible to override it with a vkey-based one like "win+\`".
This commit fixes the issue by making sure that a `KeyChord` always has a vkey,
and leveraging this fact inside ActionMap, which now ignores the scan-code.
## PR Checklist
* [x] Closes#10875
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode and other keybinding still work ✔️
* Repro settings from #10875 work correctly ✔️
## Summary of the Pull Request
This isn't a fix for #10875, but it is logging that help identify the root cause here. The logging may additionally be helpful for some of the other issues we're seeing elsewhere in the repo, namely #10340.
@lhecker is actually working on the fix for #10875, so hopefully this test will help validate.
## References
* Regressed in #10666.
* logging for #8888
## PR Checklist
* [x] Closes nothing
* [x] I work here
* [x] Tests added, and they absolutely fail, but they're localtests, so ¯\\\_(ツ)_/¯
* [n/a] Requires documentation to be updated
## details
While I was here, I noticed that `KeyBindingsTests::KeyChords` has been broken for some time now. So I fixed that too.
My first approach to solve #10875 failed.
This PR contains the most useful change as a separate commit.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode keybinding works ✔️
* command palette still works ✔️
## Summary of the Pull Request
This was missed in #10051. We need to make sure that the UIA provider can immediately know about the padding in the control, not just after the settings reload.
## PR Checklist
* [x] Closes #9955.e
* [x] Additionally, this just closes#9955. The only remaining box in there never repro'd, so probably wasn't even root caused by #9820. I think we can close that issue for now, and reactivate if something else was broken.
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Checked before/after in Accessibility Insights. Before the row rectangles were the full width of the control initially. Now they're properly padded.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR implements/solves #7125. Concretely: two requests regarding alt+space were posted there:
1. Disabling the alt+space menu when the keychord explicitly unbound - and forwarding the keystroke to the terminal
2. Disabling the alt+space menu when the keychord is bound to an action
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Not that I know
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7125
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated. N/A
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
The issue was marked Help-Wanted. I am happy to change the implementation to better fit your (planned) architecture.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
While researching the solution, I noticed that the XAML system was always opening the system menu after Alt+Space, even when explicitly setting the event to be handled according to the documentation. The only solution I could find was to hook into the "XAML bypass" already in place for F7 KeyDown, and Alt KeyUp keystrokes. This bypass sends the keystroke to the AppHost immediately. This bypass method will "fall back" to the normal XAML routing when the keystroke is not handled.
The implemented behaviour is as follows:
- Default: same as normal; system menu is working since the bypass does not handle the keystroke
- Alt+Space explicitly unbound: bypass passes the keystroke to the terminal and marks it as handled
- Alt+Space bound to command: bypass invokes the command and marks it as handled
Concretely, added a method to the KeyBindings and ActionMap interfaces to check whether a keychord is explicitly unbound. The implementation for `_GetActionByKeyChordInternal` already distinguishes between explicitly unbound and lack of binding, however this distinction is not carried over to the public methods. I decided not to change this existing method, to avoid breaking other stuff and to make the API more explicit.
Furthermore, there were some checks against Alt+Space further down in the code, preventing this keystroke from being entered in the terminal. Since the check for this keystroke is now done at a "higher" level, I thought I could safely remove these checks as otherwise the keystroke could never be sent to the terminal itself. Please correct me if I'm wrong.
Note that when alt+space is bound to an action that opens the command pallette (such as tab search), then a second press of the key combination does still open the system menu. This is because at that point, the "bypass" is cancelled (called "not a good implementation" in #4031). I don't think this can easily be solved for now, but this is a very minor bug/inconvenience.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Added tests for the new method. Performed manual checking:
* [x] Default configuration still opens system menu like normal
* [x] Binding alt+space to an action performs the action and does not show the system menu
* [x] Explicitly unbinding alt+space no longer shows the system menu and sends the keystroke to the terminal. I was unable to run the debug tap (it crashed my instance - same thing happening on preview and release builds) to check for sure, but behaviour was identical to native linux terminals.
## Summary of the Pull Request
This PR causes the Terminal to combine taskbar states at the tab and window level, according to the [MSDN docs for `SetProgressState`](https://docs.microsoft.com/en-us/windows/win32/api/shobjidl_core/nf-shobjidl_core-itaskbarlist3-setprogressstate#how-the-taskbar-button-chooses-the-progress-indicator-for-a-group).
This allows the Terminal's taskbar icon to continue showing progress information, even if you're in a pane/tab that _doesn't_ have progress state. This is helpful for cases where the user may be running a build in one tab, and working on something else in another.
## References
* [`SetProgressState`](https://docs.microsoft.com/en-us/windows/win32/api/shobjidl_core/nf-shobjidl_core-itaskbarlist3-setprogressstate#how-the-taskbar-button-chooses-the-progress-indicator-for-a-group)
* Progress mega: #6700
## PR Checklist
* [x] Closes#10090
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This also fixes a related bug where transitioning from the "error" or "warning" state directly to the "indeterminate" state would cause the taskbar icon to get stuck in a bad state.
## Validation Steps Performed
<details>
<summary><code>progress.cmd</code></summary>
```cmd
@echo off
setlocal enabledelayedexpansion
set _type=3
if (%1) == () (
set _type=3
) else (
set _type=%1
)
if (%_type%) == (0) (
<NUL set /p =]9;4
echo Cleared progress
)
if (%_type%) == (1) (
<NUL set /p =]9;4;1;25
echo Started progress (normal, 25^)
)
if (%_type%) == (2) (
<NUL set /p =]9;4;2;50
echo Started progress (error, 50^)
)
if (%_type%) == (3) (
@rem start indeterminate progress in the taskbar
@rem this `<NUL set /p =` magic will output the text _without a newline_
<NUL set /p =]9;4;3
echo Started progress (indeterminate, {omitted})
)
if (%_type%) == (4) (
<NUL set /p =]9;4;4;75
echo Started progress (warning, 75^)
)
```
</details>
## Summary of the Pull Request
Apparently the exception handler in TerminalApi is far too talkative. We're apparently throwing in `TerminalApi::CursorLineFeed` way too often, and that's caused an internal bug to be filed on us.
This represents making the event less talkative, but doesn't actually fix the bug. It's just easier to get the OS bug cleared out quick this way.
## References
* MSFT:33310649
## PR Checklist
* [x] Fixes the **A** portion of #10882, which closes MSFT:33310649
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Turns out, we'd only ever use the non-client size to calculate the size of the window, but not the actual position. As we learned in #10676, the nonclient area extends a few pixels past the visible borders of the window.
## PR Checklist
* [x] Closes#10583
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* [x] Works with the `IslandWindow`
* [x] Works with the `NonClientIslandWindow`
## Summary of the Pull Request
Do not invoke terminal resize logic if view port dimensions didn't change
## PR Checklist
* [x] Closes#10857
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Short-circuit `ControlCore::_doResizeUnderLock` if the dimensions of the
required view port are equal to the dimensions of the current view port
#### ⚠️ targets #10051
## Summary of the Pull Request
This updates our `ThrottledFunc`s to take a dispatcher parameter. This means that we can use the `Windows::UI::Core::CoreDispatcher` in the `TermControl`, where there's always a `CoreDispatcher`, and use a `Windows::System::DispatcherQueue` in `ControlCore`/`ControlInteractivity`. When running in-proc, these are always the _same thing_. However, out-of-proc, the core needs a dispatcher queue that's not tied to a UI thread (because the content proces _doesn't have a UI thread!_).
This lets us get rid of the output event, because we don't need to bubble that event out to the `TermControl` to let it throttle that update anymore.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] This is a part of #1256
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Fortunately, `winrt::resume_foreground` works the same on both a `CoreDispatcher` and a `DispatcherQueue`, so this wasn't too hard!
## Validation Steps Performed
This was validated in `dev/migrie/oop/the-whole-thing` (or `dev/migrie/oop/connection-factory`, I forget which), and I made sure that it worked both in-proc and x-proc. Not only that, _it wasn't any slower_!This reverts commit 04b751faa7.
This PR adds conhost support for downloadable soft fonts - also known as
dynamically redefinable character sets (DRCS) - using the `DECDLD`
escape sequence.
These fonts are typically designed to work on a specific terminal model,
and each model tends to have a different character cell size. So in
order to support as many models as possible, the code attempts to detect
the original target size of the font, and then scale the glyphs to fit
our current cell size.
Once a font has been downloaded to the terminal, it can be designated in
the same way you would a standard character set, using an `SCS` escape
sequence. The identification string for the set is defined by the
`DECDLD` sequence. Internally we map the characters in this set to code
points `U+EF20` to `U+EF7F` in the Unicode private use are (PUA).
Then in the renderer, any characters in that range are split off into
separate runs, which get painted with a special font. The font itself is
dynamically generated as an in-memory resource, constructed from the
downloaded character bitmaps which have been scaled to the appropriate
size.
If no soft fonts are in use, then no mapping of the PUA code points will
take place, so this shouldn't interfere with anyone using those code
points for something else, as along as they aren't also trying to use
soft fonts. I also tried to pick a PUA range that hadn't already been
snatched up by Nerd Fonts, but if we do receive reports of a conflict,
it's easy enough to change.
## Validation Steps Performed
I added an adapter test that runs through a bunch of parameter
variations for the `DECDLD` sequence, to make sure we're correctly
detecting the font sizes for most of the known DEC terminal models.
I've also tested manually on a wide range of existing fonts, of varying
dimensions, and from multiple sources, and made sure they all worked
reasonably well.
Closes#9164
`VkKeyScanW` as well as `MapVirtualKeyW` are used throughout
the project, but are input method sensitive functions.
Since #10666 `win+sc(41)` is used as the quake mode keybinding,
which is then mapped to a virtual key in order to call `RegisterHotKey`.
This mapping is highly dependent on the input method and the quake mode
key binding will fail to work once the input method was changed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10729
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* win+` opens quake window before & after changing keyboard layout ✔️
* keyboard layout changes while WT is minimized trigger reloaded ✔️
- Monarch no longer sets itself up as a `CTerminalHandoff` multi instance server by default
- In fact, `CTerminalHandoff` will only ever be a single instance server
- When COM needs a `CTerminalHandoff`, it launches `wt.exe -embedding`, which gets picked up by the Monarch and then gets handed off to itself/peasant depending on user settings.
- Peasant now recognizes the `-embedding` commandline and will start a `CTerminalHandoff` single instance listener, and receives the connection into a new tab.
Closes#10358
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds the Split Tab option to the tab context menu.
Clicking this option will `auto` split the active pane of the tab into a duplicate pane.
Clicking on an unfocused tab and splitting it will bring that tab into focus and split its active pane.
We could make this a flyout from the context menu to let people choose horizontal/vertical split in the future if it's requested.
I'm also wondering if this should be called Split Pane instead of Split Tab?
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#1912
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5025
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
https://user-images.githubusercontent.com/48369326/127691919-aae4683a-212a-4525-a0eb-a61c877461ed.mp4
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
When switching from the alt buffer back to the main buffer, we need to copy certain cursor attributes from the one to the other. However, this copying was taking place after the alt buffer had been freed, and thus could result in the app crashing. This PR simply moves that code up a bit so it's prior to the buffer being freed.
## References
PR #10843 added the code that introduced this problem.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I was able to reproduce the crash when using a debug build, and confirmed that the crash no longer occurred after this PR was applied. I also checked that the cursor attributes were still being correctly copied back when returning from the alt buffer.
Move to 1ES engineering pools
## PR Checklist
* [x] Closes#10734
* [x] I work here
* [x] If the builds still work, the tests pass. (release and PR builds...)
## Validation Steps Performed
- [x] Run the builds associated with this PR
- [x] Force run a release build off this branch
- [x] Force run a PGO training build off this branch
Shortly before adding the SSE2 variant I "improved" it by using
`_mm_packs_epi32`, but failed to test it again afterwards.
## PR Checklist
* [x] Closes#10866
* [x] I work here
## Validation Steps Performed
* `printf "\e[mNORMAL \e[1mBOLD\n"` results in correct bold white glyphs ✔️
## Validation Steps Performed
Clicked around, validated that settings still behave the same (as far as
I can tell with my limited terminal configuration expertise)
Closes#10387
Fixes dragging and dropping drive letters onto the '+' button.
Manually tested - dragging and dropping the `C:\` drive onto the '+' button works when creating a new tab, splitting or creating a new window. Dragging and dropping a regular directory still works.
Closes#10723
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add the ability to toggle a pane's split direction
- Switch from horizontal to vertical split (and vice versa)
- Propogate new borders through to children.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#10665
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10665
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Ran terminal, created multiple panes in different orientations, ran command through command palate and verified that they displayed properly in the new orientation.
When the `SetContoleTitle` API is called with a title containing control
characters, we need to filter out those characters before we can forward
the title change over conpty as an escape sequence. If we don't do that,
the receiving terminal will end up executing the control characters
instead of updating the title. We were already filtering out the C0
control characters, but with this PR we're now filtering out C1 controls
characters as well.
I've simply updated the sanitizing routine in `DoSrvSetConsoleTitleW` to
filter our characters in the range `0x80` to `0x9F`. This is in addition
to the C0 range (`0x00` to `0x1F`) that was already excluded.
## Validation Steps Performed
I've added a conpty unit test that calls `DoSrvSetConsoleTitleW` with
titles containing a variety of C0 and C1 controls characters, and which
verifies that those characters are stripped from the title forwarded to
conpty.
I've also confirmed that the test case in issue #10312 is now working
correctly in Windows Terminal.
Closes#10312
The `_invalidMap` size is dependent on both `clientSize` as well
as `glyphCellSize` and must be resized when either changes.
## PR Checklist
* [x] Closes#10855
* [x] I work here
## Validation Steps Performed
* Changing font size with Ctrl+Mousewheel in fullscreen works ✔️
This commit introduces a hack to ConptyConnection for launching WSL.
When we detect that WSL is being launched (either "wsl" or "wsl.exe",
unqialified or _specifically_ from the current OS's System32 directory),
we will promote the startingDirectory specified at launch time into a
commandline argument.
Why do we want to switch to `--cd`?
With the current design of ConptyConnection and WSL, there are some
significant limitations:
* `startingDirectory` cannot be a WSL path, which forces users to
use weird tricks such as setting the starting directory to
`\\wsl$\Distro\home\user`.
* WSL occasionally fails to launch in time to handle a `\\wsl$` path,
which makes us spawn in a strange location (or no location at all).
(This fix will only address the second one until a WSL update is
released that adds support for `--cd $LINUX_PATH`.)
We will not do the promotion if any of the following are true:
* the commandline contains `--cd` already
* the commandline contains a bare `~`
* This was a commonly-used workaround that forced wsl to start in the
user's home directory. It conflicts with --cd.
* wsl is not spelled properly (`WSL` and `WSL.EXE` are unacceptable)
* an absolute path to wsl outside the system32 directory is provided
We chose the do this trick in the connection layer, the latest possible
point, because it captures the most use cases.
We could have done it earlier, but the options were quite limiting.
They are:
* Generate WSL profiles with startingDirectory set to the home folder
* We can't do this because we do not know the user's home folder
path.
* Generate WSL profiles with `--cd` in them.
* This only works for unmodified profiles.
* This only works for generated profiles.
* Users cannot override the commandline without breaking it.
* Users cannot specify a startingDirectory (!) since the one on the
commandline wins.
* Set a flag on generated WSL profiles to request this trick
* This only works for generated profiles. Users who create their own
WSL profiles couldn't set startingDirectory and have it work the
same.
Patching the commandline, hacky though it may be, seemed to be the most
compatible option. Eventually, we can even support `wt -d ~ wsl`!
## Validation Steps Performed
Manual validation for the following cases:
```c++
// MUST MANGLE
auto a01 = _tryMangleStartingDirectoryForWSL(LR"(wsl)", L"SENTINEL");
auto a02 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X)", L"SENTINEL");
auto a03 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X ~/bin/sh)", L"SENTINEL");
auto a04 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe)", L"SENTINEL");
auto a05 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X)", L"SENTINEL");
auto a06 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X ~/bin/sh)", L"SENTINEL");
auto a07 = _tryMangleStartingDirectoryForWSL(LR"("wsl")", L"SENTINEL");
auto a08 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe")", L"SENTINEL");
auto a09 = _tryMangleStartingDirectoryForWSL(LR"("wsl" -d X)", L"SENTINEL");
auto a10 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe" -d X)", L"SENTINEL");
auto a11 = _tryMangleStartingDirectoryForWSL(LR"("C:\Windows\system32\wsl.exe" -d X)", L"SENTINEL");
auto a12 = _tryMangleStartingDirectoryForWSL(LR"("C:\windows\system32\wsl" -d X)", L"SENTINEL");
auto a13 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~/bin)", L"SENTINEL");
// MUST NOT MANGLE
auto a14 = _tryMangleStartingDirectoryForWSL(LR"("C:\wsl.exe" -d X)", L"SENTINEL");
auto a15 = _tryMangleStartingDirectoryForWSL(LR"(C:\wsl.exe)", L"SENTINEL");
auto a16 = _tryMangleStartingDirectoryForWSL(LR"(wsl --cd C:\)", L"SENTINEL");
auto a17 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~)", L"SENTINEL");
auto a18 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~ -d Ubuntu)", L"SENTINEL");
```
We don't have anywhere to put TerminalConnection unit tests :|
Closes#592.
When switching to the alt buffer, the starting cursor position, style,
and visibility is meant to be inherited from the main buffer. Similarly,
when returning to the main buffer, any changes made to those attributes
should be copied back (with the exception of the cursor position, which
is restored to its original state). This PR makes sure we handle that
cursor state correctly.
At some point I'd like to move the cursor state out of the
`SCREEN_INFORMATION` class, which would make this inheritance problem a
non-issue. For now, though, I've just made it copy the state from the
main buffer when creating the alt buffer, and copy it back when
returning to the main buffer.
## Validation Steps Performed
I've added some unit tests to verify the cursor state is inherited
correctly when switching to the alt buffer and back again. I also had to
make a small change to one of the existing alt buffer test that relied
on the initial cursor position being at 0;0, which is no longer the
case.
I've verified that the test case in issue #3545 is now working
correctly. I've also confirmed that this fixes a problem in the
_notcurses_ demo, where the cursor was showing when it should have been
hidden.
Closes#3545
## Summary of the Pull Request
<kbd>win+shift+arrows</kbd> can be used to move windows to adjacent monitors. When that happens, we'll new re-calculate the size of the window for the new monitor.
## References
* megathread: #8888
## PR Checklist
* [x] Closes#10274
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
In `WM_WINDOWPOSCHANGING`, the OS says "hey, I'm about to do {something} to your window. You cool with that?". We handle that message by:
1. checking if the window was _moved_ as a part of this message
2. getting the monitor that the window will be moved onto
3. If that monitor is different than the monitor the window is currently on, then
* calculate how big the quake window should be on that monitor
* tell the OS that's where we'd like to be.
## Validation Steps Performed
* <kbd>win+shift+arrows</kbd> works right now
* normal quake summoning still works right
I was watching a video about vectorized instructions and I wanted to
try out some new things, as I had never written AVX code before.
This commit is the result of this tiny Thursday morning detour into
AVX land. It improves performance of `TextColor::GetColor` by about 3x.
## Validation Steps Performed
* Default colors are still properly shifted +8 ✔️
Sets the tooltip text on the '+' button based on the keyboard modifiers
when dragging and dropping.
## Validation Steps Performed
Manually tested - dragged a directory onto the '+ button and saw that
* The text changed when `shift` was pressed
* The text changed when `alt` was pressed
* The text changed back when `shift` or `alt` were released
Closes#10722
## Summary of the Pull Request
This fixes two bugs related to dragging into the bounds of the `TermControl`. Although the fixes are fairly small, I'm batching them up, because I don't want to stack 2 more PRs on top of #10051.
* #9109
- This is fixed by only starting an autoscroll if the click&drag actually started within the bounds of the control.
* #4603
- Building on the above change, only modify the selection when the drag started in the control.
## References
* srsly go read #10051.
## PR Checklist
* [x] Closes#9109
* [x] Closes#4603
* [x] I work here
* [x] Test added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is kind of annoying that the auto-scrolling is handled by the TermControl, but it uses a timer that's still a WinUI construct.
We only want to start the auto-scrolling behavior when the drag started _inside_ the control. Otherwise, in the tab drag scenario, dragging into the bounds of the TermControl will trick it into thinking it should start a scroll.
## Summary of the Pull Request
When we're restoring from fullscreen, we do a little adjustment to make sure to clamp the window bounds within the bounds of the active monitor. We unfortunately didn't account for the size of the non-client area (the invisible borders around our 1px border). This didn't matter most of the time, but if the window was within ~8px of the side of the monitor (any side), then restoring from fullscreen would actually move it to the wrong place.
As it turns out, the `_quake` window is within ~8px of the edges of the monitor _very often_.
## References
* regressed in #9737
## PR Checklist
* [x] Closes#10199
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
The repro in the bug was fairly straightforward. It doesn't happen anymore.
For inexplicable reasons, the top row of pixels on our tabs, new tab
button, and caption buttons is totally unclickable. The mouse simply
refuses to interact with them. So when we're maximized, on certain
monitor configurations, this results in the top row of pixels not
reacting to clicks at all.
To obey Fitt's Law, we're gonna hackily shift the entire island up one
pixel. That will result in the top row of pixels in the window actually
being the _second_ row of pixels for those buttons, which will make them
clickable. It's perhaps not the right fix, but it works.
After discussion, we think this is a fine fix for this. We don't think
anyone's going to miss the top row of pixels on the TabView. The original
bug is painful enough for the subset of users it impacts that this is an
acceptable trade. Should a better fix be found, we can absolutely do that
instead.
Closes#7422
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Implementation of #6219 with a small tweak, not just passing the keys when no panes are present, but passing on the keys when there is no other pane to move to. This enables another usecase: 2 panes in terminal split vertically; in one of these panes running tmux with two panes that are split horizontally. This allows the user to still navigate between tmux panes even though they have terminal panes open.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Not that I know of
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6219
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated. I don't think that's necessary
* [x] Schema updated. N/A
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Implementation by propagating the boolean indicating success of moving focus all the way to the action handler, where this result will determine whether the action will be considered handled or not. When the action is not handled, the keychord will be propagated to the terminal.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing; all relevant unit tests still work
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes/implements #10058 according to directions in that issue: added support for browser navigation keys to be used in actions.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10058
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated: . If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: https://github.com/MicrosoftDocs/terminal/pull/371
* [x] Schema updated.
* [x] I've discussed this with core contributors already. According to instructions in #10058
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The mouse back/forward keys do not correspond to the keys added here. That would be a nice (but more complicated) addition, I'll add an issue for it.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
The `+=` operator is an extremely hot path under heavily output load. This PR aims to optimize its speed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Supports #10563
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This pull request ports our old release pipeline from Azure DevOps' editor to real YAML.
It includes the following changes on top of a straight-up "export" from Azure:
- Converts all queue-time variables into form-based parameters
- Adds a "matrix" build strategy for Configs * Platforms
- Renames all jobs to have reasonable names
- The YAML generator has a bug where it inlines scripts *and* file paths if a task had both; remove old inlines
- Removes dead rules
- Fixes the WPF build to include the apiset impostor
- Migrates the access token into the environment for the one build stage that needs it
- Cleans up some of the online script logic
- Removes all of the "!is pull request?" checks
- For tabs started from the Terminal, the initial sizing information is
passed into the connection and used to establish the PTY. Those
parameters are given over to the `OpenConsole.exe` acting as PTY to
establish the initial buffer/window size.
- However, for tabs started from outside, the PTY is created with some
default buffer information FIRST as the Terminal hasn't even been
involved yet. As such, when the Terminal gets that connection, it must
tell the PTY to resize just as it connects to match the window size
it's about to use.
- Ongoing resize operations in the Terminal did and still work fine
because they transmitted the updated size with the
`ResizePseudoConsole` API.
## Validation Steps Performed
- [x] Confirmed existing tabs opening have correct initial size in PTY
(like with CMD `mode con` command)
- [x] Confirmed inbound cmd tabs have correct initial size in PTY via
`mode con` command per bug repro
Closes#9811
Turns out, DWrite will automatically turn some features on even if they weren't included in the feature vector passed into it. Remove these features from our default list for easier readability.
This commit fixes the UseDx mode for conhost.
In order to add support for UseDx without calling `SetWindowSize`,
responsibility for resizing `_invalidMap` has been moved to occur
only when the renderer itself recognizes a new size. Furthermore
`InvalidateAll` is now the central point to invalidate `_invalidMap`.
## Validation Steps Performed
* Enabling `UseDx` enables the DxEngine for conhost ✔️
* Resizing windows in conhost works ✔️
* Resizing windows in WT works ✔️Closes#5455
## Summary of the Pull Request
Uses the new logic to find visual neighbors of a pane to find which pane is the target when the move-focus commands are used.
## References
It sounds like this logic will be refined later to meet #4692
## PR Checklist
* [x] Closes#2398
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Created a grid of panes and confirmed that focus movement went to the right quadrant instead of just the first child of the sibling.
Adds support for users to be able to set font features and axes (see the spec for more details!)
## Detailed Description
**CustomTextLayout**
- Asks the `DxFontRenderData` for the font features when getting glyphs
- _If any features have been set/updated, we always skip the "isTextSimple" shortcut_
- Asks the `_formatInUse` for any font axes when mapping characters in `_AnalyzeFontFallback`
**DxFontRenderData**
- Stores a map of font features (initialized to the [standard feature list])
- Stores a map of font axes
- Has methods to add font features/axes to the map or update existing ones
- Has methods to retrieve the font features/axes
- Sets the font axes in the `IDWriteTextFormat` when creating it
## Validation Steps Performed
It works!
[standard feature list]: ac5aef67d1/DrawableObject.ixx (L802)
Specified in #10457
Related to #1790Closes#759Closes#5828
## Summary of the Pull Request
When we perform a `focusTab` action, we currently do nothing if the parameter was greater than the number of tabs. This PR changes that behavior. Now, `focus-tab -t 999999` will always focus the last tab, instead of silently doing nothing.
## PR Checklist
* [x] Closes#9369
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* [x] ran tests
* [x] validated commandline manually
Related work items: MSFT-32957145
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev bdb25dc99dcb2f1ee483dffe883d0178ea9d18dc
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add functionality to swap a pane with an adjacent (Up/Down/Left/Right) neighbor.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
This work potentially touches on: #1000#2398 and #4922
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes a component of #1000 (partially, comment), #4922 (partially, `SwapPanes` function is added but not hooked up, no detach functionality)
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Its been a while since I've written C++ code, and it is my first time working on a Windows application. I hope that I have not made too many mistakes.
Work currently done:
- Add boilerplate/infrastructure for argument parsing, hotkeys, event handling
- Adds the `MovePane` function that finds the focused pane, and then tries to find
a pane that is visually adjacent to according to direction.
- First pass at the `SwapPanes` function that swaps the tree location of two panes
- First working version of helpers `_FindFocusAndNeighbor` and `_FindNeighborFromFocus`
that search the tree for the currently focused pane, and then climbs back up the tree
to try to find a sibling pane that is adjacent to it.
- An `_IsAdjacent' function that tests whether two panes, given their relative offsets, are adjacent to each other according to the direction.
Next steps:
- Once working these functions (`_FindFocusAndNeighbor`, etc) could be utilized to also solve #2398 by updating the `NavigateFocus` function.
- Do we want default hotkeys for the new actions?
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
At this point, compilation and manual testing of functionality (with hotkeys) by creating panes, adding distinguishers to each pane, and then swapping them around to confirm they went to the right location.
Pass inbound handoff message via heap so it cannot race out of scope by the time it reaches the ConsoleIoThread
## PR Checklist
* [x] Closes#10251
* [x] I work here.
* [x] Manually verified somewhat
## Detailed Description of the Pull Request / Additional comments
- `OpenConsole.exe` is started in response to the OS `conhost.exe` request for a handoff and prepares an Out Of Proc Multithreaded COM server.
- A COM thread from the pool inside `OpenConsole.exe` picks up the inbound message and allocates some stack space for the `CONSOLE_API_MSG` coming in
- That COM thread calls down to set up the I/O thread that will pump the console driver handle and passes a pointer to the stack-allocated `CONSOLE_API_MSG` as the `LPVOID` parameter for starting the thread.
Now one of two things happen:
1. The I/O thread is scheduled pretty much immediately (or soon enough that the COM thread hasn't messed with the stack space), picks up the pointer to the COM thread's stack with `CONSOLE_API_MSG`, and processes the initial message correctly.
2. The COM thread continues and finalizes the handoff message to `conhost.exe` declaring success. It then pops stack and "frees" the memory space. If it doesn't manage to overwrite it, we're still good. If it does, then things go crazy.
This fix changes it so that the `CONSOLE_API_MSG` is sent into the heap before being passed to the other thread so it's in a known location that won't be freed or overwritten unexpectedly.
## Validation Steps Performed
- [x] - Confirmed that many handoffs from the run box seem to work alright on my system after this change.
- [x] - Confirmed that many tab creations/splits seem to work alright on my system after this change.
- [x] - Would prefer if @ianjoneill could try to F5 this branch to build/deploy it, set it as default, and see if it makes it go away completely... but I'm pretty confident it is this based on the dumps provided either way.
## Summary of the Pull Request
We no longer automatically write the 'hidden' field for profile stubs we create
**Note**: This does not retroactively remove the automatically generated hidden fields in current settings files
## PR Checklist
* [x] Closes#10539
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Deleted the ubuntu stub in my settings file, booted up terminal, new created stub did not have the hidden field. Created a fragment that overrides the hidden field and it worked.
As identified by Michael Niksa, our MDE heuristics for understanding relationship between conhost and related processes was incorrect. Exposing trace here to assist in correlation.
Related work items: MSFT-32957145
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 3c886da66d77d1aa36b52794929e388af292539c
The `_CONSOLE_API_MSG` buffer is resized to cover an entire message.
Later on any UTF-8 data is cached in a separate temporary
buffer inside `til::u8state` to prevent lone surrogate pairs.
Both cases are problematic as neither buffer is freed after the read
has finished. Passing a 100MB buffer to conhost once will thus cause it
to continue using ~220MB of physical memory until the conhost process exits.
This change releases unneeded memory as soon as the requested buffer
size has halved. In practice this means that once a command has returned
all buffers will shrink, as the shell commonly sends very small messages.
## PR Checklist
* [x] Closes#10731
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Buffers aren't reallocated during printing ✔️
* Buffers shrink after printing finished ✔️
This commit introduces an alternative to specifying key bindings as a combination of key modifiers and a character. It allows you to specify an explicit virtual key as `vk(nnn)`.
Additionally this commit makes it possible to bind actions to scan codes. As scan code 41 appears to be the button below the Escape key on virtually all keyboards, we'll be able to bind the quake mode hotkey to `win+sc(41)` and have it work consistently across most if not all keyboard layouts.
## PR Checklist
* [x] Closes#7539, Closes#10203
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
The following was tested both on US and DE keyboard layouts:
* Ctrl+, opens settings ✔️
* Win+` opens quake mode window ✔️
* Ctrl+plus/minus increase/decrease font size ✔️
## Summary of the Pull Request
Adjust the y-coordinate of the mouse coordinates we send based on how much the viewport has been scrolled
## Validation Steps Performed
Validated: cannot repro the issue in #10190Closes#10190
## Summary of the Pull Request
We were making the quake window exactly the width of the monitor it was on, but that didn't account for the 1px of border on either side.
## References
* megathread: #8888
## PR Checklist
* [x] Closes#10201
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
It happened before, it doesn't anymore.
## Summary of the Pull Request
Add an explicit background color to part of the settings UI to prevent animation overflow. The previous solution (adding a ScrollViewer) caused problems.
## References
#10619 adds a ScrollViewer for one of the issues in #10609
## PR Checklist
* [x] Closes#10664
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
Visually confirmed the animation doesn't overflow, changed the theme and confirmed the colors are responsive. Confirmed the extra scrollbar is gone.
Visual Studio 2022 Preview recently released the v143 toolchain.
C4189 is now flagging several unused variables, which breaks our build.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* CascadiaPackage builds ✔️
* All tests build ✔️
## Summary of the Pull Request
When the quake window is moved to another monitor, re-evaluate it's size for that monitor.
## References
* megathread: #8888
* Similar, but not the same: #10274
## PR Checklist
* [x] Closes#10182
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
We'll probably need to do this in a few more places, but I'm breaking PRs into small chunks for easier reviews.
## Validation Steps Performed
Summoned the window to a bunch of different resolutions. Where it would use the wrong size before, it no longer does.
As discussed in team sync. Is this a mysterious dark pattern we didn't know about?
* [x] closes#10721
* [x] I work here
* [x] doesn't need tests
* [x] doesn't need docs
* see also #10160
#### ⚠️ targets #10051
## Summary of the Pull Request
This PR does one big, primary thing. It removes all the constructors from any TerminalConnections, and changes them to use an `Initialize` method that accepts a `ValueSet` of properties.
Why?
For the upcoming window/content process work, we'll need the content process to be able to initialize the connection _in the content process_. However, the window process will be the one that knows what type of connection to make. Enter `ConnectionInformation`. This class will let us specify the class name of the type we want to create, and a set of settings to use when initializing that connection.
**IMPORTANT**: As a part of this, the constructor for a connection must have 0 arguments. `RoActivateInstance` lets you just conjure a WinRT type just by class name, but that class must have a 0 arg ctor. Hence the need for `Initialize`, to actually pass the settings.
We're using a `ValueSet` here because it's basically a json blob, with more steps. In the future, when extension authors want to have custom connections, we can always deserialize the json into a `ValueSet`, pass it to their connection's `Initialize`, and let then get what they need out of it.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760298
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
`ConnectionInformation` was included as a part of this PR, to demonstrate how this will eventually be used. `ConnectionInformation` is not _currently_ used.
## Validation Steps Performed
It still builds and runs.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR implements the ability to drop directories/files on the '+' button which in turn will open the tab/pane/window in the given starting path.
In order to do this, I refactored the click's lambda into a method and re-used it
Sadly I wasn't able to add note about the alt/shift feature (any ideas how to do this?)
Also most of the code is "look-a-like" from other places within the project, as I don't have much experience in windows development.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
implements #10073
## PR Checklist
* [ ] Closes#10073
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
** tests were done manually both of the old feature (alt/shift+click) on the '+' and on the profiles
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
** no idea what to add there, if any.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
tested manually.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Supports #10563
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
When you use the size parameter to WideCharToMultiByte, it only
null-terminates the output string if the input string was
null-terminated within the specified range.
Burned in for 1k runs-
BEFORE
Summary: Total=1000, Passed=997, Failed=3
AFTER
Summary: Total=1000, Passed=1000, Failed=0
Fixes MSFT-34656993
Fix unbound read of cooked read buffer
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 756c8dcd4cf9551f5bf090b98bf3fba5498f8eff
Related work items: MSFT-32957145
An internal change CommandLineToArgVW to an apiset.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a71b943e06c009085d6a2bb886dd50c2d0d2c276
Related work items: MSFT-32178383
## Summary of the Pull Request
This forces the `TermControl` to only use `ControlCore` and `ControlInteractivity` via their WinRT projections. We want this, because WinRT projections can be used across process boundaries. In the future, `ControlCore` and `ControlInteractivity` are going to be living in a different process entirely from `TermControl`. By enforcing this boundary now, we can make sure that they will work seamlessly in the future.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760270
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Most all this was just converting pure c++ types to winrt types when possible. I've added a couple helper projections with `til` converters, which made most of this really easy.
The "`MouseButtonState` needs to be composed of `Int32`s instead of `bool`s" is MENTAL. I have no idea why this is, but when I had the control OOP in the sample, that would crash when trying to de-marshal the bools. BODGY.
The biggest changes are in the way the UIA stuff is hooked up. The UiaEngine needs to be attached directly to the `Renderer`, and it can't be easily projected, so it needs to live next to the `ControlCore`. But the `TermControlAutomationPeer` needed the `UiaEngine` to help implement some interfaces.
Now, there's a new layer we've introduced. `InteractivityAutomationPeer` does the `ITextProvider`, `IControlAccessibilityInfo` and the `IUiaEventDispatcher` thing. `TermControlAutomationPeer` now has a
`InteractivityAutomationPeer` stashed inside itself, so that it can ask the interactivity layer to do the real work. We still need the `TermControlAutomationPeer` though, to be able to attach to the real UI tree.
## Validation Steps Performed
The terminal behaves basically the same as before.
Most importantly, I whipped out Accessibility Insights, and the Terminal looks the same as before.
## Summary of the Pull Request
Replaces the key chord editor in the actions page with a listener instead of a plain text box.
## References
#6900 - Settings UI Epic
## Detailed Description of the Pull Request / Additional comments
- `Actions` page:
- Replace `Keys` with `CurrentKeys` for consistency with `Action`/`CurrentAction`
- `ProposedKeys` is now a `Control::KeyChord`
- removes key chord validation (now we don't need it)
- removes accept/cancel shortcuts (nowhere we could use it now)
- `KeyChordListener`:
- `Keys`: dependency property that hooks us up to a system to the committed setting value
- this is the key binding view model, which propagates the change to the settings model clone on "accept changes"
- We bind to `PreviewKeyDown` to intercept the key event _before_ some special key bindings are handled (i.e. "select all" in the text box)
- `CoreWindow` is used to get the modifier keys because (1) it's easier than updating on each key press and (2) that approach resulted in a strange bug where the <kbd>Alt</kbd> key-up event was not detected
- `LosingFocus` means that we have completed our operation and want to commit our changes to the key binding view model
- `KeyDown` does most of the magic of updating `Keys`. We filter out any key chords that could be problematic (i.e. <kbd>Shift</kbd>+<kbd>Tab</kbd> and <kbd>Tab</kbd> for keyboard navigation)
## Validation Steps Performed
- Tested a few key chords:
- ✅single key: <kbd>X</kbd>
- ✅key with modifier(s): <kbd>Ctrl</kbd>+<kbd>Alt</kbd>+<kbd>X</kbd>
- ❌plain modifier: <kbd>Ctrl</kbd>
- ✅key that is used by text box: <kbd>Ctrl+A</kbd>
- ✅key that is used by Windows Terminal: <kbd>Alt</kbd>+<kbd>F4</kbd>
- ❌key that is taken by Windows OS: <kbd>Windows</kbd>+<kbd>X</kbd>
- ✅key that is not taken by Windows OS: <kbd>Windows</kbd>+<kbd>Shift</kbd>+<kbd>X</kbd>
- Known issue:
- global key taken by Windows Terminal: (i.e. quake mode keybinding)
- Behavior: global key binding executed
- Expected: key chord recorded
## Demo
## Summary of the Pull Request
Sends the additional xaml notification when the user presses the '+' or delete button for unfocused appearances
## PR Checklist
* [x] Closes#10673
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
It works now
`SRWLOCK`, as used by `std::shared_mutex`, is a inherently unfair mutex
and makes no guarantee whatsoever whether a thread may acquire the lock
in a timely manner. This is problematic for our renderer which relies on
being able to acquire the lock in a timely and predictable manner.
Drawing stalls of up to one minute have been observed in tests.
This issue can be solved with a primitive ticket lock, which is 10x
slower than a `SRWLOCK` but still sufficiently fast for our use case
(10M locks per second per thread). It's likely that any non-trivial lock
duration will diminish the difference to "negligible".
## Validation Steps Performed
* It still blends ✔️
This commit is a preparation for upcoming changes to
KeyChordSerialization for #7539 and #10203. It introduces several
string helpers to simplify key chord parsing and get rid of our implicit
dependency on locale sensitive functions, which are known to behave
erratically.
Additionally key chord serialization used to depend on iteration order
of a hashmap which caused different strings to be returned for the same
key chord. This commit fixes the iteration order and will always return
the same string.
## Validation Steps Performed
* Key bindings are correctly parsed ✔️
* Key bindings are correctly serialized ❔
## Summary of the Pull Request
Adds unfocused appearance creation/configuration in the SUI
There is now an 'Unfocused Appearance' section at the bottom of the 'Appearance' tab in a profile. There is a '+' button to create an unfocused appearance if one does not exist, or a delete button to delete the unfocused appearance if one exists (only one of these buttons is visible at a time).
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
This commit is a preparation for upcoming changes to KeyChordSerialization for #7539 and #10203.
In order to support variadic macros, /Zc:preprocessor was enabled, which required changing unrelated parts of the project.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Project still compiles ✔️
Updates check-spelling to 0.0.19
https://github.com/check-spelling/check-spelling/security/advisories/GHSA-g86g-chm8-7r2p
I'm pinning `actions/checkout` to @v2 instead of micromanaging the
version. We have reasonable faith that GitHub will do a good job of
maintaining their version branch.
I'll probably introduce a version branch for check-spelling in the near
future as well. The job name change is for future bits -- I originally
copied the name from a template and didn't understand its significance
-- eventually it'll actually be used by the workflow. And if one uses
`act`, having distinct / well named jobs is actually useful.
When navigating the settings (or saving/discarding) the animation of the main content overflows the bar with the save and discard buttons. If the main content is encapsulated in a ScrollView the issue goes away.
Fixes one of the issues in #10609
## Validation Steps Performed
Clicked around a whole bunch and have not seen the overflow happen again. Verified that on tabs where scroll is necessary it can still be scrolled, and reflow of elements still functions.
Replaces `KeyModifiers` with the pretty much equivalent
`VirtualKeyModifiers` enum in winrt.
After doing this I noticed #10593 which changes the KeyChords a lot, but
it seems these PRs are still compatible
The issue also mentions replacing Vkey with
`Windows::System::VirtualKey`, but I chose not to because that enum only
includes a subset of the keys terminal supports here (no VK_OEM_* keys)
## Validation Steps Performed
Changed key bind in config, and confirmed it still works after
restarting terminal
Closes#877
After the introduction of scratch.sln, the nuget restore in razzle.cmd fails. This fixes it by specifying the sln file to use.
## PR Checklist
* [x] Closes#10605
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
## Validation Steps Performed
Ran razzle
## Summary of the Pull Request
RIS resets mouse mode and encoding
## PR Checklist
* [x] Closes#8613
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
## Summary of the Pull Request
When discarding or saving settings, the current navigation should be retained.
## References
Issue introduced by #10390
## PR Checklist
* [x] Closes#10617
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
`menuItemsSTL` is filled with all _non_ profile navItems, then `menuItemsSTL` fills `menuItems`, then the profile navItems are added to `menuItems`. So to include the profile nav items in the iteration, `menuItems` needs to be used
## Validation Steps Performed
Spam discard and save buttons
## Summary of the Pull Request
This implements `GetAttributeValue` and `FindAttribute` for `UiaTextRangeBase` (the shared `ITextRangeProvider` for Conhost and Windows Terminal). This also updates `UiaTracing` to collect more useful information on these function calls.
## References
#7000 - Epic
[Text Attribute Identifiers](https://docs.microsoft.com/en-us/windows/win32/winauto/uiauto-textattribute-ids)
[ITextRangeProvider::GetAttributeValue](https://docs.microsoft.com/en-us/windows/win32/api/uiautomationcore/nf-uiautomationcore-itextrangeprovider-getattributevalue)
[ITextRangeProvider::FindAttribute](https://docs.microsoft.com/en-us/windows/win32/api/uiautomationcore/nf-uiautomationcore-itextrangeprovider-findattribute)
## PR Checklist
* [X] Closes#2161
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
- `TextBuffer`:
- Exposes a new `TextBufferCellIterator` that takes in an end position. This simplifies the logic drastically as we can now use this iterator to navigate through the text buffer. The iterator can also expose the position in the buffer.
- `UiaTextRangeBase`:
- Shared logic & helper functions:
- Most of the text attributes are stored as `TextAttribute`s in the text buffer. To extract them, we generate an attribute verification function via `_getAttrVerificationFn()`, then use that to verify if a given cell has the desired attribute.
- A few attributes are special (i.e. font name, font size, and "is read only"), in that they are (1) acquired differently and (2) consistent across the entire text buffer. These are handled separate from the attribute verification function.
- `GetAttributeValue`: Retrieve the attribute verification of the first cell in the range. Then, verify that the entire range has that attribute by iterating through the text range. If a cell does not have that attribute, return the "reserved mixed attribute value".
- `FindAttribute`: Iterate through the text range and leverage the attribute verification function to find the first contiguous range with that attribute. Then, make the end exclusive and output a `UiaTextRangeBase`. This function must be able to perform a search backwards, so we abstract the "start" and "end" into `resultFirstAnchor` and `resultSecondAnchor`, then perform post processing to output a valid `UiaTextRangeBase`.
- `UiaTracing`:
- `GetAttributeValue`: Log uia text range, desired attribute, resulting attribute metadata, and the type of the result.
- `FindAttribute`: Log uia text range, desired attribute and attribute metadata, if we were searching backwards, the type of the result, and the resulting text range.
- `AttributeType` is a nice way to understand/record if the result was either of the reserved UIA values, a normal result, or an error.
- `UiaTextRangeTests`:
- `GetAttributeValue`:
- verify that we know which attributes we support
- test each of the known text attributes (expecting 100% code coverage for `_getAttrVerificationFn()`)
- `FindAttribute`:
- test each of the known _special_ text attributes
- test `IsItalic`. NOTE: I'm explicitly only testing one of the standard text attributes because the logic is largely the same between all of them and they leverage `_getAttrVerificationFn()`.
## Validation Steps Performed
- @codeofdusk has been testing this Conhost build
- Tests added for Conhost and shared implementation
- Windows Terminal changes were manually verified using accessibility insights and NVDA
This pull request brings back the "Base Layer" page, now renamed to
"Defaults", and the "Reset to inherited value" buttons. The scope of
inheritance for which buttons will display has been widened.
The button will be visible in the following cases:
The user has set a setting for the current profile, and it overrides...
1. ... something in profiles.defaults.
2. ... something in a Fragment Extension profile.
3. ... something from a Dynamic Profile Generator.
4. ... something from the compiled-in defaults.
Compared to the original implementation of reset arrows, cases (1), (3)
and (4) are new. Rationale:
(1) The user can see a setting on the Defaults page, and they need a way
to reset back to it.
(3) Dynamic profiles are not meaningfully different from fragments, and
users may need a way to reset back to the default value generated
for WSL or PowerShell.
(4) The user can see a setting on the Defaults page, **BUT** they are
not the one who created it. They *still* need a way to get back to
it.
To support this, I've introduced another origin tag, "User", and renamed
"Custom" to "None". Due to the way origin/override detection works¹, we
cannot otherwise disambiguate between settings that came from the user
and settings that came from the compiled-in defaults.
Changes were required in TerminalSettings such that we could construct a
settings object with a profile that does not have a GUID. In making this
change, I fixed a bit of silliness where we took a profile, extracted
its guid, and used that guid to look up the same profile object. Oops.
I also fixed the PropertyChanged notifier to include the
XxxOverrideSource property.
The presence of the page and the reset arrows is restricted to
Preview- or Dev-branded builds. Stable builds will retain their current
behavior.
¹ `XxxOverrideSource` returns the profile *above* the current profile
that holds a value for setting `Xxx`. When the value is the
compiled-in value, `XxxOverrideSource` will be `null`. Since it's
supposed to be the profile above the current profile, it will also be
`null` if the profile contains a setting at this layer.
In short, `null` means "user specified" *or* "compiled in". Oops.
Fixes#10430
Validation
----------
* [x] Tested Release build to make sure it's mostly arrow-free (apart from fragments)
Implements an `Appearances` xaml object and an `AppearanceViewModel` in the SettingsEditor project. Updates `Profiles` to use these new objects for its default appearance.
This is the first step towards getting `UnfocusedAppearance` into the SUI.
Adds try-catch blocks to the parts where we layer a fragment onto a profile and create a new profile from a fragment. This allows us to continue looping over the remaining fragments after failing to use a badly-formed one, instead of aborting prematurely.
## PR Checklist
* [x] Closes#10590
## Validation Steps Performed
Non-badly formed fragments get loaded even if there is a badly formed one somewhere
Sets the working directory of the terminal when invoked from the shell extension. This ensures that new tabs opened with a starting directory of `.` open in the directory that the terminal was invoked from.
Closes#8933
## Validation Steps Performed
Manually tested - default PowerShell profile set to use home directory, Windows PowerShell profile set to use current directory. Launched via the shell extension and the default profile opened in the explorer directory, as did a new Windows PowerShell tab.
Change accessibility notifier creation so we do not create one when we're in PTY mode. (Guard all call sites to skip math/event work when the notifier is null.) MSAA events are legacy events that are registered for globally and used by some screen readers to find content in the conhost window. The PTY mode is not responsible for hosting the display content or input window, so it makes sense for it to not broadcast these events and delegate the accessibility requirement to the connected terminal.
## References
- #10537
## PR Checklist
* [x] Closes#10568
* [x] I work here
* [x] Manual test launches passed.
Currently, when the user changes the console codepage (manually or via a script) the GDI engine tries to find and set the "best possible" font. The "best possible" here is charset-wise, it doesn't mean that the font is actually better or more eye-candy for the user.
Example:
- Open cmd
- Set the font to Consolas
- Enter `chcp 932`
- Suddenly, a wild MS Gothic appears!
This kind of makes sense (*"if I'm changing the codepage I probably want to see the national characters"*) but it doesn't happen anywhere else - all other apps just substitute the missing glyphs.
After #10472 / #10478 this magic should finally work here as well. So, do we still need to change the whole font? Terminal doesn't do that after all.
## Validation Steps Performed
Download [932.cmd.txt](https://github.com/microsoft/terminal/files/6697577/932.cmd.txt),
rename to 932.cmd, run it, check if the output is still readable.
Closes#10497
## Summary of the Pull Request
Adds a feature flag `Feature_EditableActionsPage` that controls whether the Actions page in the Settings UI is read-only vs editable. The editable version is disabled for `Release` builds and enabled everywhere else (i.e. Dev, Preview, etc...).
Validated using `<stage>` `AlwaysEnabled` and `AlwaysDisabled`.
## References
#6900 - Actions Page Epic
## PR Checklist
Closes#10578
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Implementation of #10477 - handle surrogate pairs in GDI renderer.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#10477
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #10477
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
### Why not let Windows draw surrogate pairs? It can do that.
Basically, the comment says everything:
c90de69250/src/renderer/gdi/paint.cpp (L346-L347)
However, handling things above U+FFFF doesn't really require extra effort. It's enough to:
- Put *all* characters to the output buffer
- Set the first width to cluster width and the rest to 0
- Sit back and relax while Windows does the rest
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
```CMD
@echo off
chcp 65001
echo 𠜎𠝹𠱓𠱸𠲖𠳏𠳕𠴕𠵼𠵿𠸎
echo 👨👩👧👦
```
Save this as a UTF-8 cmd file and run.
### Before the change
### After the change
An example of a third party app working with surrogate pairs in a patched OpenConsole:
As discussed, this change doesn't claim to be the full support for surrogate pairs (there are still corner cases possible), but brings it on par with Terminal with minimal effort.
This PR is a small start in a broader "Minimize to Tray" feature (#5727).
This particular change is scoped only to the scenario when a quake window
is minimized. Currently the only way to bring back the quake window
when it's minimized is to press the global hotkey again. This gives another
option - to press the terminal icon in the tray.
Eventually though, minimize to tray will be available for any window, and
I'd like more time to flesh out the general porpoise scenarios and context
menus. Having just a bit in this PR also helps reviewers by keeping it small!
Delay load call SetThreadDescription to restore WPF renderer on Win7
## PR Checklist
* [x] Closes something @DHowett asked me to do.
* [x] I work here
* [x] I F5'd it on a version with this function and it still works
## Detailed Description of the Pull Request / Additional comments
I keep forgetting that anything in the WPF control needs to keep working on Win7. Or more specifically... I remember this fact for the DX renderer, but not for the render thread base. Oops. Turns out this particular convenience method to set thread descriptions for visibility inside the debugger (to make my life easier) only works down to 1607 (see https://docs.microsoft.com/windows/win32/api/processthreadsapi/nf-processthreadsapi-setthreaddescription). Since it's just a debugging convenience... skipping it entirely when the procedure is not found should be fine. Also I don't try to load `kernel32.dll` and just get the handle of the existing module (which per the remarks at https://docs.microsoft.com/windows/win32/api/libloaderapi/nf-libloaderapi-getmodulehandlew will not increment the module reference count) because `kernel32.dll` pretty much has to be there or we're already in hot water.
## Summary of the Pull Request
This adds the "add new" button to the actions page. It build on the work of #10220 by basically just adding a new list item to the top of the key binding list.
This also makes it so that if you click the "accept changes" button when you have an invalid key chord, we don't do anything.
## References
#6900 - Actions page Epic
#9427 - Actions page design doc
#10220 - Actions page PR - set action
## Detailed Description of the Pull Request / Additional comments
- `ModifyKeyBindingEventArgs` is used to introduce new key bindings. We just ignore `OldKeys` and `OldActionName` because both didn't exist before.
- `IsNewlyAdded` tracks if this is an action that was added, but has not been confirmed to add to the settings model.
- `CancelChanges()` is directly bound to the cancel button. This allows us to delete the key binding when it's clicked on a "newly added" action.
## Validation Steps Performed
- Cancel:
- Deletes the action (because it doesn't truly exist until you confirm changes)
- Accept:
- Adds the new action.
- If you attempt to edit it, the delete button is back.
- Add Action:
- Delete button should not be visible (redundant with 'Cancel')
- Action should be initialized to a value
- Key chord should be empty
- Cannot add another action if a newly added action exists
- Keyboard interaction:
- escape --> cancel
- enter --> accept
- Accessibility:
- "add new" button has a name
- Interaction with other key bindings:
- editing another action --> delete the "newly added" action (it hasn't been added yet)
- only one action can be edited at a time
This commit adds support for bold text in DxRenderer.
For now, bold fonts are always rendered using DWRITE_FONT_WEIGHT_BOLD
regardless of the base weight.
As yet, this behavior is unconfigurable.
References
Previous refactoring PRs: #9096 (DxFontRenderData) #9201 (DxFontInfo)
SGR support tracking issue: #6879Closes#109
The code in this file was adapted from the STL on the 2021-07-05.
It backports the following Windows 8 functions to Windows 7:
* WaitOnAddress
* WakeByAddressSingle
* WakeByAddressAll
These functions are used within `til`. This commit will allow `til` to be used in the conhost source code.
Validation
* [x] correct .dll loads on Windows 7
* [x] correct .dll loads on Windows 10
* [x] link line for PublicTerminalCore prefers this fake apiset over kernel32
Previously `TermControl::Close` destroyed all `ThrottledFunc`s to ensure they're not scheduling any callbacks on the UI thread, as the call to `Close` signals the point at which the `TermControl` isn't part of the UI thread anymore. `_CursorPositionChanged` tried to prevent access to the potentially deallocated `_tsfTryRedrawCanvas` by checking the `std::shared_ptr` for nullability, but since the deallocation happens on the UI thread and the nullability check on a background thread, this check introduced a race condition.
This commit solves the issue by not deallocating any `ThrottledFunc`s anymore and instead checking the `_closing` flag inside the `ThrottledFunc` callback on the UI thread.
Additionally this commit cleans up some antipatterns around the use of `std::optional`.
## PR Checklist
* [x] Closes#10479
* [x] Closes#10302
## Validation Steps Performed
* Opening and closing tabs doesn't crash ✔️
* Printing long text doesn't crash ✔️
* Manual scrolling doesn't crash ✔️
* ^G / the audible bell doesn't crash ✔️
## Summary of the Pull Request
#7960 was caused by `UiaTextRangeBase::_blockRange` not being initialized, thus pointing to random memory. In most cases, we initialize it properly in `RuntimeClassInitialize`, however, the copying version of `RuntimeClassInitialize` doesn't actually copy it over, resulting in it still containing random memory.
NVDA (and other screen readers) occasionally use `Clone` (really just the copy initializer), resulting in this bug occurring randomly.
## PR Checklist
* [X] Closes#7960
* [X] Tests added/passed
## Validation Steps Performed
Test failed before the change, but passes after the change.
This introduces the ability to set the action for a key binding. A combo box is used to let the user select a new action.
## References
#6900 - Actions page Epic
#9427 - Actions page design doc
#9949 - Actions page PR
## Detailed Description of the Pull Request / Additional comments
### Settings Model Changes
- `ActionAndArgs`
- new ctor that just takes a `ShortcutAction`
- `ActionMap`
- `AvailableActions` provides a map of all the "acceptable" actions to choose from. This is a merged list of (1) all `{ "command": X }` style actions and (2) any actions with args that are already defined in the ActionMap (or any parents).
- `RegisterKeyBinding` introduces a new unnamed key binding to the action map.
### Editor Changes
- XAML
- Pretty straightforward, when in edit mode, we replace the text block with a combo box. This combo box just presents the actions you can choose from.
- `RebindKeysEventArgs` --> `ModifyKeyBindingEventArgs`
- `AvailableActionAndArgs`
- stores the list of actions to choose from in the combo box
- _Unfortunately_, `KeyBindingViewModel` needs this so that we can populate the combo box
- `Actions` stores and maintains this though. We populate this from the settings model on navigation.
- `ProposedAction` vs `CurrentAction`
- similar to `ProposedKeys` and `Keys`, we need a way to distinguish the value from the settings model and the value of the control (i.e. combo box).
- `CurrentAction` --> settings model
- `ProposedAction` --> combo box selected item
## Validation Steps Performed
- Cancel:
- ✔️ change action --> cancel button --> begin editing action again --> original action is selected
- Accept:
- ✔️ don't change anything
- ✔️ change action --> OK! --> Save!
- NOTE: The original action is still left as a stub `{ "command": "closePane" }`. This is intentional because we want to prevent all modifications to the command palette.
- ✔️ change action & change key chord --> OK! --> Save!
- ✔️ change action & change key chord (conflicting key chord) --> OK! --> click ok on flyout --> Save!
- NOTE: original action is left as a stub; original key chord explicitly unbound; new command/keys combo added.
Introduces `FontConfig`, an object that isolates font-related settings
in our profiles
Users can now define font settings in their json as so:
```
"font":{
"face": "Consolas",
"size": 12
}
```
Backwards compatible with the currently expected way of defining font
settings in the json, note however that upon hitting 'Save' in the SUI,
these settings **will be rewritten to the font-object style in the json
(as above)**.
## Validation Steps Performed
Existing functionality works, new functionality works
References #1790Closes#6049
This commit adds a "(requires relaunch)" suffix to the header of the language picker control.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
Passing structures larger than the register size is very expensive
due to Microsoft's x64 calling convention. We could reduce the
overhead by passing the string-view by reference, but this forces us
to allocate the parameters as static string-views on the data
segment of our binary. I've found that passing them as classic
C-strings is more ergonomic instead and fits the need for
high performance in this particular code.
This improves performance for VT-heavy output by 15-20%.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
This commit introduces a basic ApplicationState class, without being used for anything yet to aid reviewers. At a later point actual usages of this new class may be added separately.
## References
This commit is an initial step towards implementing #8324.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Creating a `state.json` with `{"generatedProfiles":["{53e75ed9-2b63-4118-856d-0510c4f6b97e}"]}` updates the ApplicationState, as observed through a debugger ✔️
* Deleting the "generatedProfiles" field sets the corresponding field back to nullopt ✔️
Try to throttle the cursor redrawing in the conhost world.
The motivation of this is the high CPU usage of `TriggerRedrawCursor` (#10393).
This can be seen as the conhost version of #2960.
This saves 5%~8% of the CPU time.
Supports #10462.
## Summary of the Pull Request
Updates the `closeTab` action to optionally take an index.
## PR Checklist
* [x] Closes#7180
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: MicrosoftDocs/terminal#347
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Added the following configuration to `settings.json` and validated both key combinations behaved as expected. Also opened the command palette and ensured that the actions were displayed.
```json
{ "command": "closeTab", "keys": "ctrl+shift+delete" },
{ "command": { "action": "closeTab", "index": 0 }, "keys": "ctrl+shift+end" }
```
Noticed the json schema was listing the option as invalid even though it's accepted by WT. So added it to schema to remove the error.
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
## Validation Steps Performed
No longer shows as invalid in VSCode.
This commit introduce three new `til` features:
* "til/latch.h": A std::latch clone, until we're on C++20.
* "til/mutex.h": A safe mutex wrapper, which only allows you access to the protected data after locking it. No more forgetting to lock mutexes!
* "til/throttled_func.h": Function invocation throttling used to be available as the `ThrottledFunc` class already. But this class is vastly more efficient and doesn't rely on any WinRT types.
This PR also adds a `til::ends_with` string helper which is `til::starts_with` counterpart.
## Validation Steps Performed
* Scrollbar throttling still works as it used to ✔️
* No performance regressions when printing big.txt ✔️Closes#10393
This PR Introduces `DxFontInfo` to simplify the logic in
`DxFontRenderData`.
`DxFontInfo` aims to be the DWrite equivalent of `FontInfo` &
`FontInfoBase` in GDI. It encapsulates the needed information to
represent a displayable font face. It also provides the ability to
resolve a font face based on the available fonts on the system.
## References
This is a follow-up of #9096.
Initial Italic support was introduced by #8580.
The motivation behind this is to support bold & bold-italic text in
Windows Terminal.
Fix startup race of resizing ConPTY
- Depending on what the timing and ordering is of the message coming in
from the signal thread, it may be applied to the startup structure
after the I/O thread has begun initializing the console buffer
structures but before it has signaled that it is done and the signal
thread is ready to make changes directly. This likely happens because
the end of the I/O thread setup has a weird unlock/lock jog for the
input thread and the signal thread might have been scheduled in the
middle of it.
- My resolution here is to ensure that the signal thread just keeps
storing the latest resize message until it is told that everything is
initialized. Whomever comes in to tell the signal thread this
information (under lock) will pickup and run the resize if one came in
before everything was ready. This should resolve the race.
## Validation Steps Performed
- o-sdn-o confirms this resolves their issue
Closes#10400
Replace PolyTextOutW with ExtTextOutW to allow substitution of missing
glyphs from other fonts.
Why not let Windows substitute the glyphs that are missing in the
current font? Currently the GDI renderer of conhost/OpenConsole uses
`PolyTextOutW` for drawing. `PolyTextOutW` doesn't try to substitute
any missing glyphs, so the only way to see, say, Hiragana is to change
the _whole font_ to something like MS Gothic (which is eye-bleeding, to
be honest).
A trivial replace `PolyTextOutW` -> `ExtTextOutW` does the trick.
Switch to `PolyTextOutW` happened in Windows 7 along with introduction
of conhost.exe. Substitution worked in previous Windows versions, where
internal NT interfaces were used.
# Before the change:
# After the change:
Closes#10472
The CursorStyle enum is declared as being of type `uint` on the C# side,
but as `size_t` on the C++ side. There's a C# size_t impostor we could
use, System.UIntPtr, but I don't want to risk changing the public API of
TerminalTheme and I don't know if it can be used as a base type for an
enum.
Anyway, since we don't have more than four billion cursor types I chose
to narrow the field to a uint32_t and unpack it in TerminalSetTheme.
Fixes#10485
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 40df712b33a40e76aeeac87f823bbb028d2e3972
Related work items: MSFT-32007459
Fixes the `Invoke-CodeFormat` and `Invoke-OpenConsoleTests` functions in `OpenConsole.psm1` so that they can be run directly from PowerShell.
Addresses the issues found when creating #10447.
`Invoke-CodeFormat` did not work when invoked directly from PowerShell due to a relative path being passed into the .NET function `[IO.File]::WriteAllLines()`. The working directory for .NET objects does not change when you change directory in PowerShell, so the paths were being treated as relative to the initial working directory of the shell - which was not the terminal git repo.
`Invoke-OpenConsoleTests` had 3 issues:
1. The path to `TestHostApp` was wrong.
2. It would attempt to run the "in host app" tests both in the host app and not in the host app.
3. The test configuration in `tests.xml` wasn't in sync with the `runABC.cmd` files, so the remoting and control unit tests didn't run.
## Validation Steps Performed
1. Ran `Invoke-CodeFormat` and `runformat.cmd` from multiple directories and didn't see errors.
2. Ran `Invoke-OpenConsoleTests` and didn't see errors.
This update brings some significant changes to the Cascadia family:
* Arabic and Hebrew support
* Italics (the new ones, not the cursive ones)
* Tweaked letterforms and fixed interpolation values for the upright
faces.
Since we now have four font files, this commit also relocates them to a
much more reasonable place (res/fonts/) and tidies up the build and
exclude rules to make them more extensible in the future.
This commit introduces localization for the "Open in Windows Terminal"
menu item and differentiates it based on compile-time branding (rather
than runtime detection!).
@leonMSFT's tray icon pull request had the excellent idea to use the
TerminalApp's resource compartment for auxiliary resources for projects
that can't otherwise be localized the same way. Doing localization in
the shell extension (or WindowsTerminal.exe) would require us to use
MUIRCT and split the build process up to support mui files. That's a
huge amount of work... but this is *not* a huge amount of work.
Fixes#6112
## Summary of the Pull Request
#10297 found a bug in `ActionMap` where the `ToggleCommandPalette` key chord could not be found using `GetKeyBindingForAction`.
This was caused by the following:
- `AddAction`: when adding the action, the `ActionAndArgs` is basically added as `{ToggleCommandPalette, ToggleCommandLineArgs{}}` (Note the default ctor used for the action args)
- `GetKeyBindingForAction`: we're searching for an `ActionAndArgs` structured as `{ToggleCommandPalette, nullptr}`
- Since these are _technically_ two different actions, we are unable to find it.
This issue was fixed by making the `Hash(ActionAndArgs)` function smarter! If the `ActionAndArgs` has no args, but the `ShortcutAction` _supports_ args, generate the args using the default ctor.
By making `Hash()` smarter, everybody benefits from this logic! We can basically now enforce that `ActionAndArgs{ <X>, nullptr } == ActionAndArgs{ <X>, <default_ctor> }`.
## Validation Steps Performed
- Added a test.
- Tested this on #10297's branch and this does fix the bug
## Summary of the Pull Request
`ApplicationLanguages::PrimaryLanguageOverride` requires packaged activation.
This PR prevents any such application crashes, by skipping any calls to `PrimaryLanguageOverride`, as well as hiding the language selector in the settings UI.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
## Validation Steps Performed
When WT is run unpackaged:
* Doesn't crash during start ✔️
* SUI doesn't show the language selector ✔️
Persist inbox conhost; delegate control activities to it via a pipe
## PR Checklist
* [x] Closes#10194 - WSL Debug Tap doesn't work
* [x] Closes#10134 - WSL Parameter is Incorrect
* [x] Closes#10413 - Ctrl+C not passed to client
* [x] Closes#10414 - Leftover processes on abrupt termination
* [x] Might help #10251 - Win+X Powershell sometimes fails to attach
* [x] I work here
* [x] Manually tested with assorted launch scenarios
## Detailed Description of the Pull Request / Additional comments
It turns out that there's a bit of ownership that goes on with the original inbox `conhost.exe` and the operating system/driver. The PID of that original `conhost.exe` is stowed when the initial connection is established and it is verified for several activities. This means that the plan of letting it go completely away and having the `OpenConsole.exe` take over all of its activities must be slightly revised.
I have tested the following two alternatives to keeping `conhost.exe` around and they do not work:
1. Replacing the original owner `conhost.exe` with `OpenConsole.exe` - A.) The driver does not allow this. Once the owner is registered, it cannot be replaced. B.) There's no way of updating this information inside the client process space and it is kept there too in the `kernelbase`/`conclnt` data from its initial connection.
2. Attempting to pick up the first packet (to determine headed/headless and other initial connection information that we use to determine whether handoff is appropriate or not) prior to registering any owner at all. - The driver doesn't allow this either. The owner must be registered prior to a packet coming through.
Put this mental model in your head:
CMD --> Conhost (inbox) --> OpenConsole (WT Package) --> Terminal (WT Package)
So since the `conhost.exe` needs to stick around, here's what I'm doing in this PR:
- `conhost.exe` in the OS will receive back the `OpenConsole.exe` process handle on a successful handoff and is expected to remain alive until the `OpenConsole.exe` exits. It's now waiting on that before it terminates itself.
- `conhost.exe` in the OS will establish a signal channel pipe and listen for control commands from `OpenConsole.exe` in a very similar fashion to how the `ConPTY` signal pipe operates between the Terminal and the PTY (provided by `OpenConsole.exe` in this particular example.) When `OpenConsole.exe` needs to do something that would be verified by the OS and rejected... it will instead signal the original `conhost.exe` to do that thing and it will go through.
- `conhost.exe` will give its own handle through to `OpenConsole.exe` so it can monitor its lifetime and cleanup. If the owner is gone, the session should end.
- Assorted handle cleanup that was leading to improper exits. I was confused between `.reset()` and `.release()` for some of the `wil::unique_any<T>` handling and it lead to leaked handles. The leaked handles meant that threads weren't aware of the other sides collapsing and wouldn't cleanup/terminate appropriately.
How does this fix things?
- For the WSL cases... WSL was specifically looking up the owner PID of the console session from the driver. That was the `conhost.exe` PID. If it exits, that PID isn't valid and is recycled. Thus the parameter is incorrect or other inappropriate WSL setup behaviors.
- Ctrl+C not passed... this is a signal the operating system rejects from a PID that is not the owner. This is now relayed through the original owner and it works.
- Leftover processes... I believe I explained this was both not-enough-monitoring of each others' process lifetimes coupled with mishandling of release/resetting handles and leaking them.
- Powershell sometimes fails to attach... my theory on this one is that it's a race that became upset when the `conhost.exe` disappeared while something about Powershell/.NET was still starting, much like the WSL one. I believe now that it is sticking around, it will be fine.
Also, this WILL require an OS update to complete improvement of functionality and I have revised the interface ID. This is considered an acceptable breaking change with no mitigation because we said this feature was an alpha preview.
## Validation Steps Performed
- Launched WSL with defapp set, it works
- Launched WSL with defapp set and the debug tap on, it works and opens in two tabs
- Launched CMD, ran ping, did Ctrl+C, it now receives it
- Launched Win+X powershell a ton of times. It seems fine now
- Launched cmd, powershell, wsl, etc. Killed assorted processes in the chain (client/conhost/openconsole/windowsterminal) and observed in Process Explorer (with a long delta timer so I could see it) that they all successfully tear down now without leftovers.
An exception was introduced for the 'Toggle Command Palette' action to **not** being dispatched. Otherwise the command palette that was just closed will become visible again.
## PR Checklist
* [x] Closes#10240
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
- Selecting the `Toggle command palette` item in the command palette will now properly close the command palette.
- Opening and closing the Command Palette through shortcut keys is still working fine.
- Other command palette items are still working fine as well.
## Summary of the Pull Request
This commit introduces a copy constructor/operator for
`_CONSOLE_API_MSG`. The change is not trivial as the struct contains a
union of unnamed structs that cannot be copied using regular language
features. As such a copy operator using `memcpy` was implemented.
Additionally all access specifiers were removed, as those allow a C++
compiler to reorder struct members. This would break message passing.
This commit is a good opportunity to prevent such miscompilations
proactively.
## Validation Steps Performed
* Command prompts of WSL2 fish-shell and pwsh still work ✔️Closes#10076
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Immediately cancelling the preview when the user is navigating back from a nested command.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10165
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Basically 2 changes are done here:
- Allow the click handler to run for the back button when the button has focus and user hits the enter key (similarly as hitting space now).
- Now immediately cancelling the preview when the user is navigating back. Felt nicer to do it immediately at that point then keeping the preview active until the user hits cancel to close the palette. So the preview is already cancelled at step **5** instead of 6 as mentioned in the reproduction steps here https://github.com/microsoft/terminal/issues/10165#issue-899838383. But of course let me know if you're not agreeing here 😀 .
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
- Open 'Color Scheme' and verified preview is still working fine when selecting different schemes.
- After tabbing back to the Back button verified that when hitting enter or space the preview is cancelled and the original color scheme is being used again.
- Then after going back to 'Color Scheme' previews are still working ok.
- After hitting Enter on one of the Color Schemes the scheme still becomes active as before.
## Summary of the Pull Request
Fixes a bug where the edit button in the actions page would have white text when in light theme. Now, we just fallback to XAML's built-in value (black in light theme and white in dark theme).
## References
#6900 - Epic
Closes#10406
This commit makes the feature staging header build in OS razzle.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev cd1428ce557238663b7a748763ea8ce082b88256
Related work items: MSFT-33722503
## Summary of the Pull Request
This commit fixes various race conditions regarding the settings UI. It's unsafe to write to class members from background threads without acquiring mutexes or yielding to the main thread first.
By changing the settings reload code path to yield to the main thread early, we're able to cut down on code complexity and unsafe member accesses.
## PR Checklist
* [x] Closes#9273
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Settings UI reloads without crashing ✔️
This pull request converts four of our existing `#ifdef` (or `#ifndef`)
`INSIDE_WINDOWS` blocks to til::features:
* Attempting to establish a handoff session (inside Windows only)
* The ability to *receive* a handoff session (outside Windows only)
* The DX engine (outside Windows only) and shaders (also outside only)
* Whether we use numpad event synthesis for clipboard/conpty (inside
Windows only)
Most of these are using the preprocessor verison of til::feature, only
because it is more difficult to gate the inclusion of headers on
constant expressions. I'd love to prefer the compile time version.
## Summary of the Pull Request
This PR adds a global "language" setting, which may be set to any supported BCP 47 tag.
Additionally a ComboBox is added to the settings UI under "Appearance", listing all languages with their localized names.
This PR introduces one new issue: If you change the language while the app is running, the UI will be in a torn state, as not all UI elements refresh automatically if the `PrimaryLanguageOverride` is changed.
## PR Checklist
* [x] Closes#5497
* [x] I work here
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated
## Validation Steps Performed
* UI language changes when changing the "language" in settings.json before starting WT / while WT is running. ✔️
* "language" field is removed from settings.json if "Use system default" is selected. ✔️
* "language" field is added or updated in settings.json if any other language is selected. ✔️
* Removes qps- languages if debugFeatures is false. ✔️
* Correctly refreshes all UI elements with the new language. ❌
This pull request implements a "feature flagging" system that will let
us turn Terminal and conhost features on/off by branch, "release" status
or branding (Dev, Preview, etc.).
It's loosely modelled after the Windows OS concept of "Velocity," but
only insofar as it is driven by an XML document and there's a tool that
emits a header file for you to include.
It only supports toggling features at compile time, and the feature flag
evaluators are intended to be fully constant expressions.
Features are added to `src\features.xml` and marked with a "stage". For
now, the only stages available are `AlwaysDisabled` and `AlwaysEnabled`.
Features can be toggled to different states using branch and branding
tokens, as documented in the included feature flag docs.
For a given feature Feature_XYZ, we will emit two fixtures visible to
the compiler:
1. A preprocessor define `TIL_FEATURE_XYZ_ENABLED` (usable from MIDL,
C++ and C)
2. A feature class type `Feature_XYZ` with a static constexpr member
`IsEnabled()` (usable from C++, designed for `if constexpr()`).
Like Velocity, we rely on the compiler to eliminate dead code caused by
things that compile down to `if constexpr (false)`. :)
Michael suggested that we could use `WindowsInbox` as a branding to
determine when we were being built inside Windows to supplant our use of
the `__INSIDE_WINDOWS` preprocessor token. It was brilliant.
Design Decisions
----------------
* Emitting the header as part of an MSBuild project
* WHY: This allows the MSBuild engine to ensure that the build is
only run once, even in a parallel build situation.
* Only having one feature flag document for the entire project
* WHY: Ease.
* Forcibly including `TilFeatureStaging` with `/FI` for all CL compiler
invocations.
* WHY: If this is a project-wide feature system, we should make it as
easy as possible to use.
* Emitting preprocessor definitions instead of constexpr/consteval
* WHY: Removing entire functions/includes is impossible with `if
constexpr`.
* WHY: MIDL cannot use a `static constexpr bool`, but it can rely on
the C preprocessor to remove text.
* Using MSBuild to emit the text instead of PowerShell
* WHY: This allows us to leverage MSBuild's `WriteOnlyWhenDifferent`
task parameter to avoid changing the file's modification time when
it would have resulted in the same contents. This lets us use the
same FeatureStaging header across multiple builds and multiple
branches and brandings _assuming that they do not result in a
feature flag change_.
* The risk in using a force-include is always that it, for some
reason, determines that the entire project is out of date. We've
gone to great lengths to make sure that it only does so if the
features _actually materially changed_.
## Summary of the Pull Request
Fixes a bug where top-level iterable commands were not serialized.
## PR Checklist
* [X] Closes#10365
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
- `Command::ToJson`:
- iterable commands deserve the same treatment as nested commands
- `ActionMap`:
- Similar to how we store nested commands, iterable commands need to be handled separately from standard commands. Then, when generating the name map, we make sure we export the iterable commands at the same time we export the nested commands.
Add missing keys to the schema:
- globalSummon (and args: desktop, monitor, name, dropdownDuration, toggleVisibility)
- quakeMode
- iterateOn
- commands
Also enforces required keys for commands and deprecates "keybindings"
## PR Checklist
* [x] Closes#7443
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
## Detailed Description of the Pull Request / Additional comments
There were some other pending keys mentioned on the issue, but I don't think they are pending anymore.
## Validation Steps Performed
Changed the `"$schema"` value in my settings.json to point to the edited one.
#### ⚠️ This targets #10051
## Summary of the Pull Request
This PR creates a `Samples` solution which can be used for quickly testing our particular WinUI + Xaml Islands + wapproj setup, with a `TermControl`. This lets us quickly prototype and minimally repro xaml islands bugs, but also lets us iterate quickly on changes in the process model. I'll be using this in the future to prove that the out-of-proc control works (for tear-out), without having to tear up the entire `TerminalApp` all at once.
While I'll be leaning on this extensively for tear-out prototyping, I've also found myself wanting this kind of sample sln many times in the past. We run into bugs all the time where we're not sure if they're XAML Islands bugs or Terminal bugs. However, standing up a scratch sln with MUX hooked up, and a `XamlApplication` from the toolkit, and XAML Islands is time consuming. This sample sln should let us validate if bugs are XI bugs or Terminal bugs much easier.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes one bullet point of https://github.com/microsoft/terminal/projects/5#card-50760312
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is _largely_ a copy-pasta of our existing projects, in massively simplified form. I'm gonna wontfix most comments on the code that was copy-pasta'd. If it's bad here, it's probably also bad in the real version in `OpenConsole.sln`.
* I made an entirely new `.sln` for this, so that these samples wouldn't need to build in CI. They're not critical code, they're literally just for prototyping.
* `TerminalAppLib` & `TerminalApp` became `SampleAppLib` and `SampleApp`. This is just a simple application hosting a single `TermControl`. It references the winmds and dlls from the main `OpenConsole.sln`, but in a way that would be more like a project consuming a nuget feed of the control, rather than a `ProjectReference`.
- It still does all the `App.xaml` and `Toolkit.XamlApplication` stuff that TerminalApp does, so that it can load MUX resources, and do MUX-y things.
* `WindowsTerminal` became `WindowExe`. I tore out all of the `NonClientIslandWindow` stuff - this is just a window with a xaml island.
* `CascadiaPackage` became `Package`. It does the vclibs hack again for the `TerminalConnection` dlls (because this package can't actually determine that `TerminalConnection.dll` requires `cprest*.dll`), as well as for `windowsterminal.exe` (which we'll need in the future for out-of-proc controls). I got rid of all the Dev/Preview/Release asset machinations as well.
Wherever possible, I changed filenames slightly so that they won't get accitdentally opened when someone tries to open a file by name in their editor (**cough** sublime's <kbd>ctrl+p</kbd> menu **cough**).
## Validation Steps Performed
The sample app launches, and displays a TermControl. What else do you want? <sup>(_rhetorical, not a prompt for a wishlist_)</sup>
(cherry picked from commit 30d6cf4839fca8ac8203f6c2489b02a4088b851e)
Summon, not toggle visibility, window on command line dispatch
## PR Checklist
* [x] Closes#10292
* [x] I work here
* [x] Manual test
## Detailed Description of the Pull Request / Additional comments
- This is the same as #10389, just a different route. I didn't realize it at the time.
## Validation Steps Performed
- Opened a window. Dispatched the `wt -w 0 - p <profile>` and watched it join/summon instead of minimize the active WT.
The flyout wasn't very polished, so I did some adjustments.
It's all visual changes, functionality should be the same.
* made the flyout use OverlayCornerRadius and 16px padding (to match WinUI 2.6)
* changed ColorPicker to muxc:ColorPicker for new styles (the color schemes picker too)
* changed "Custom" Button into a ToggleButton
* no longer needs ellipsis - localization files should be updated
* OK button was moved to the right and uses accent color
* adjusted margins and padding
* tweaked the color boxes to _look_ like the ones in color schemes
 
## Validation Steps Performed
* Color picker in settings UI still works ✔️
* Color picker for tabs still works ✔️
Activate window only (no toggle) when inbound connection arrives
## PR Checklist
* [x] Closes#10386
* [x] I work here
* [x] Manual test passed.
## Detailed Description of the Pull Request / Additional comments
The default for the `SummonWindowBehavior` is a toggle of the visibility state. I didn't realize that. We do not want that for inbound connections. We want always-brought-to-front.
## Validation Steps Performed
- Made the change. Launched Terminal as default as active window. Runbox'd another command. It didn't hide itself like it used to. Stays visible.
This PR adds a new PercentageSignConverter that appends the percentage sign to a number. The new converter is being used by the Acrylic opacity slider label and the Background image opacity slider label.
* [x] Closes#10289
## PR Checklist
* [x] Closes random crash that @lhecker sent me on Teams
* [x] I work here.
## Detailed Description of the Pull Request / Additional comments
- Any change to the renderer engine has to be done under lock. Leonard gave me a crash where the dirty rectangles changed out from under the renderer thread. By inspection, only one spot in `ControlCore` is modifying the engine outside of lock.... here. The dump is too far along to definitively prove the issue and it's sort of a race so its difficult to repro. But the theory is sound that all writes to the dirty regions must be done under lock. So here's a fix.
Restore embedded manifests to say 18362 or unpackaged activation won't work (for helix testing.)
## PR Checklist
* [x] Closes#10265
* [x] I work here
* [x] Tests now pass
## Detailed Description of the Pull Request / Additional comments
- Unpackaged activation uses the embedded manifest inside the exe. We use unpackaged activation to run our tests in Helix as it's easier that way. Turns out the 1903/19h1 OS thinks 19041 isn't greater than the minimum XAML islands version of 18226 and blocks the load of `TerminalApp.dll` causing a crash (fail fast) on launch. For **REASONS**, 18362 is considered greater than 18226.
- Packaged activation will use the value in the .appxmanifest and everything is somehow still fine there even with it saying 19041 now.
## Validation Steps Performed
- Kicking a Helix-run off on this branch: https://dev.azure.com/ms/terminal/_build/results?buildId=177336&view=results
Restore helix runs by passing parameters
## PR Checklist
* [x] Closes#10266
* [x] I work here
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
It looks like at some point the configuration and platform variables got messed up passing into the Helix steps and preventing the Powershell scripts from setting up the Helix payload correctly. This restores them to functionality.
## Validation Steps Performed
- Ran it in the pipeline
## Summary of the Pull Request
Incremental linking was disabled for debug builds only by mistake in the past.
It can't hurt to have it enabled for debug builds.
## PR Checklist
* [x] I work here
* [x] Project still builds
Update profiles schema to draft 2020-12 because as mentioned in https://github.com/microsoft/vscode/issues/98724#issuecomment-786502628, OpenAPI Specification 3.1 defines using JSON Schema 2020-12 and VS Code already has early implementation around it.
Basically, this just gets rid of the following error shown by VS Code when editing the settings.json file
```
Draft 2019-09 schemas are not yet fully supported.
```
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
Docs have been updated (for bug fixes/features)
docs update => proper capitalisation would be better. 👍: Github
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
### Other information:
Signed-off-by: Ayushman Singh Chauhan <ascb508@gmail.com>
Applies feedback from https://github.com/microsoft/terminal/pull/9949#pullrequestreview-662590658
Highlights include:
- bugfix: make all edit buttons stay visible if the user is using assistive technology
- rename a few functions and resources to match the correct naming scheme
- update the localized text for a conflicting key chord being assigned
- provide better comments throughout the actions page code
## References
#9949 - Original PR
Closes#10168
Just come cleanup I did not manage to get to before #9270 merged.
Specifically:
- We only initialize the animation and timer if we need them
- We don't repeatedly destroy/create the timer
## Validation Steps Performed
It still works
## Summary of the Pull Request
When the `runformat` script was updated to include xaml formatting, the new code failed to work if run from anywhere other than the project root. This PR updates the script so it can be run from anywhere.
## PR Checklist
* [x] Closes#9768
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
There were a couple of places in the script where it was collecting the list of xaml files by doing `git ls-files **/*.xaml`. That obviously relies on the code being executed from within the root of the project. I've now updated those queries to prefix the path with the `$root` variable, which points to the project root.
## Validation Steps Performed
I've run the `runformat` script from within the tools directory and confirmed that it now works correctly from there. I've tested by changing some formatting in both .cpp and .xaml files, and also saved some .xaml files with a BOM to make sure those were appropriately stripped.
C++/WinRT has a way to ensure that we use `make<>` instead of allocating
WinRT objects on the stack, but until 10.0.19041 the XAML compiler
generated code that violated that rule.
Because of how make detection is implemented, it must create a derived
type (and so WinRT implementation types can't be `final`).
I cannot for the life of me repro the original bug. I've got fonts with bad permissions SxS, I've tried installing a font twice, I've tried stopping the font cache service. No idea how to manually repro the original bug.
BUT theoretically, this function should never throw. So lets just switch this to a `LOG_IF_FAILED`, and hope that this goes away?
* [x] Fixes#10211?
* [x] built & ran manually.
Unclear if this can get cherry-picked trivially to 1.8. Code's pretty trivial though so if we need another PR for that, it can be arranged.
Stop startup crash by logging when monarch fails to register inbound connections, but still crash when COM attempted to start us
## References
- See also #10243
## PR Checklist
* [x] Closes#10233
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
- This should stop the crash on launch until we can get the internal teams to resolve the catalog issue
- I left the COM -Embedding start fail fast though so it won't take forever to time out (as default timeout is 3-5 minutes). I will change that if it becomes necessary.
## Validation Steps Performed
- I basically have to guess at this one based on the crash dump and Watson logs because it happens sporadically when the platform messes up on us.
ConptyConnection has two different failure modes:
1. We failed to initialize the pseudoconsole or create the process
2. The process exited with an error code.
Until this commit, they were treated the same way: closeOnExit=always
would force the pane/tab to be destroyed. This was very bad in case 1,
where we would display a (possibly useful) error message and then
immediately close the window.
This was made even worse by the change in #10045. We removed
startingDirectory validation and promoted it to an error message (so
that we could eventually let the connection handle startingDirectory in
its own way.) This of course revealed that a number of users had set
invalid starting directories… and those users included some who set
closeOnExit to always. Boom: instant "terminal opens and crashes"¹
In this commit, we introduce detection for a connection that fails
before it's been established. When that happens, we will ignore the
user's closeOnExit mode.
¹ It only looks like a crash; it's actually _technically_ functioning
properly.
Closes#10225.
Prevent crashes in Settings UI launch on OS versions before package management extensions
## PR Checklist
* [x] Closes#10106
* [x] I work here
* [x] Manual tests passed.
## Detailed Description of the Pull Request / Additional comments
- On older OS versions like 18363, some of the COM interfaces we use to look up information from the OS application package management catalog (to find default terminals) are unavailable. This returns `E_NOINTERFACE`. This then ends up returning an empty list of items and null as a selected item.
- I had intended for that to not return that particular error all the way up and just log it because the console and terminal lookup functions always return at least one element: the one representing the `conhost.exe` that is already on the machine.
- I have changed the "default packages" lookup to log instead of return failures like E_NOINTERFACE such that it can continue processing and make the "package" of the hardcoded `conhost.exe` default no matter what. (It will still return an error if there are somehow 0 packages because that code changed or some other catastrophic event happened...)
- I have also changed the Model to have a nulled DefaultTerminal model object (as all winrt objects are nullable) instead of using an optional. I did this because XAML is perfectly happy receiving a `nullptr` for a selected item and will just not select anything. By contrast, if it has an exception occur... it will just bubble that out and crash.
## Validation Steps Performed
- Simulated no items returned from list and nullptr returned to XAML on Current() method of Model. Validated XAML will happily select no item from list (and is fine with an empty list of items... that is it doesn't crash).
- Simulated downlevel OS returning package management errors in lookup catalog functions after the hardcoded default is added to the list. Ensured that this error is only logged, the remainder of the package identification functions make the hardcoded default package, and it is presented as your one and only option in the XAML.
Summon the listening window when it receives an inbound connection
## PR Checklist
* [x] Closes#9460
* [x] I work here.
* [x] Manual test.
## Detailed Description of the Pull Request / Additional comments
- We cannot just send our window to foreground by simply calling user32 on the window handle. But fortunately, the remoting behavior already has a summon window function with a workaround for the Quake functionality.
- This bubbles up an event from the TerminalApp's Page to the WindowsTerminal's Apphost so it can call the same window summoning behavior in IslandWindow as is triggered when the Monarch dictates this out of the Microsoft.Terminal.Remoting project.
## Validation Steps Performed
- Opened the Terminal with it registered as DefTerm. Activated some other windows to the foreground. Start > Run > Cmd. Tab connects and opens in existing Terminal and it is brought to foreground.
- With no running Terminal and registered as DefTerm, do Start > Run > Cmd. New Terminal is spawned and it is brought to foreground
## Summary of the Pull Request
VS16.10 and later contain two regressions:
* Marking the use of `pshpack*.h` in system headers with C4103
* The newly included, builtin `AssemblyReference.xaml` is missing the `AssemblyReferences` project capability
## PR Checklist
* [x] I work here
## Validation Steps Performed
Built the project with VS16.10 and VS17.0.
Correct Default Application Selector styles for high contrast and to change with OS theme dark/light toggle
## References
- https://docs.microsoft.com/windows/uwp/design/controls-and-patterns/xaml-theme-resources
## PR Checklist
* [x] Closes#10181
* [x] I work here
* [x] Manual tests passed
## Detailed Description of the Pull Request / Additional comments
1. If I'm going to override colors, I need to define styles in a resource dictionary with Light, Dark, and HighContrast variants so it can be appropriate for each of those.
2. For HighContrast, I need to not mess with text colors and let them follow the default settings.
3. For using System Brushes, I need to use a `ThemeResource` binding not a `StaticResource` binding. The former lets it change when you flip the OS toggle Light/Dark. The latter is stuck to whatever it was when the page loaded.
## Validation Steps Performed
- Loaded in light mode. Flipped to dark. Watched it change live. Checked both unselected and rollover/selected to ensure it was fine.
- Loaded in dark mode. Flipped to light. Watched it change live. Checked both unselected and rollover/selected to ensure it was fine.
- Flipped to HC. Watched it change live. Confirmed that unselected is black/white contrast and the roll over has the cyan/black. (No longer uses special second-line brush for HC, matches the controls I modeled this one on from OS Settings).
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds a new bellStyle called `window`. When `window` is set and a BEL is emitted, we flash the pane that emitted it.
Additionally, changes bellStyle in the SUI to a list of checkboxes instead of radio buttons, to match bellStyle being a flag-enum. Deprecates 'BellStyle::Visual' in the schema, but still allows it to be set in the json (it maps to `Window | Taskbar`)
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#6700
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
GIF in Teams
[Defapp] Use real HPCON for PTY management; Have Monarch always listen for connections
## PR Checklist
* [x] Closes#9464
* [x] Related to #9475 - incomplete fix
* [x] I work here.
* [x] Manual test
## Detailed Description of the Pull Request / Additional comments
- Sometimes peasants can't manage to accept a connection appropriately because I wrote defterm before @zadjii-msft's monarch/peasant architecture. The simple solution here is to just make the monarch always be listening for inbound connections. Then COM won't start a peasant with -Embedding just to ask the monarch where it should go. It'll just join the active window. I didn't close 9475 because it should follow monarch policies on which window to join... and it doesn't yet.
- A lot of interesting things are happening because this didn't have a real HPCON. So I passed through the remaining handles (and re-GUID-ed the interface) that made it possible for me to pack the right process handles and such into an HPCON on the inbound connection and monitor that like any other ConptyConnection. This should resolve some of the process exit behaviors and signal channel things like resizing.
Added trace to conhost to instrument buffers that are cooked prior to being passed to the console.
* [x] I've discussed this with core contributors already (internal)
VALIDATION
- Ensured trace is correctly logged in ETL (via TraceLog)
## Summary of the Pull Request
This is a redux of #8882.
From the original:
> This is really similar to what we're doing with the `CommandPalette`. We're adding a ~~Preview~~`KeyDown` handler to the SUI `MainPage`, that connects to `TerminalPage::_HandleKey`. That allows the SUI a chance to search the keymap to dispatch actions for keybindings, similar to how the command palette does it.
>
> This also means it's now possible for the SUI to invoke _all_ the actions available to the Terminal. This includes the ones like `IncreaseFontSize`, which require a _Terminal_ to actually do something. So we have to make sure all the calls to `_GetActiveControl` actually check that the result is non-null before using it.
>
> A bunch of the actions do nothing now from a SUI tab, others behave _weird_. Like "Rename tab" / "Open Tab Renamer" do nothing. "Duplicate Tab" again does nothing - we try making a new settings tab, which just focuses the settings tab again. "Copy text" definitely does nothing, same with paste.
I don't know why I thought this wouldn't work. I thought we'd have to do this in `PreviewKeyDown` or something, which led to [weirdness](https://github.com/microsoft/terminal/pull/8882#issuecomment-767088554). Turns out, we don't need it to be in `PreviewKeyDown`. It can just be in the SUI's `KeyDown`.
## References
* Original: #8882
* Workaround was in #8885
## PR Checklist
* [x] Closes#8767
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
The special case handler from #8885 is no longer needed
## Validation Steps Performed
* Switching tabs with Ctrl+Tab works
* Command palette works
* fullscreen, focus mode works
* close window works
* copy paste on Ctrl+C/V works, even when bound
* Select all text in textboxes works
* tab navigation through UI elements works
Each mouse-down event's time and position is now stored, and if we
process a left-mouse-down event at the same position as the previous one
and within the double click time we set the double click flag.
Also adds a case statement to `_UpdateSGRMouseButtonState` so that we
send hover events instead of ignoring them.
Note: The 'right-click menu in far manager shows up at the wrong
location' bug still exists with this, as it seems to use the cursor
position as told by user32.
Related to #376
## Validation Steps Performed
Double click in far manager works, hover in far manager works (hovering
over items in the right-click menu correctly highlights them)
Went for option 2 proposed here:
https://github.com/microsoft/terminal/issues/10140#issuecomment-845193132.
Disabling back space in the nested entry didn't felt as the nicest
solution. Instead now all state that keeps track of nested commands is
cleared when switching beteen modes.
## Validation Steps Performed
- Validated the specified issue is fixed by this change:. now after
entering a sub command and hitting backspace the palette no longer
shows the sub command item (here `< Select color scheme...` ).
- Validated that switching between all modes (command line, actions, tab
search & tab switch) still work as expected.
- Validated as well that all modes still work as expected.
Didn't add unit tests, but happy to try that out if this would be
required.
Closes#10140
## Summary of the Pull Request
Adds support for the `focusPane` action, and the `focus-pane` subcommand. These allow the user to focus a pane by it's ID.
* `focusPane` accepts an `id`, identifying the id of the pane to focus.
* `focus-pane`, `fp` requires the parameter `--target,-t` to ID the pane it's going to focus.
## PR Checklist
* [x] Closes#5803
* [x] Closes#5464
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - oh no
## Detailed Description of the Pull Request / Additional comments
The ID isn't _totally_ useful right now, since users can't see them. But they're there, and used in-order. This is just slightly more ergonomic for complicated commandlines than `mf up; mf left`
## Validation Steps Performed
Tested in command palette
Tested a variety of commandlines. `wtd -w 0 mf down ; sp` and `wtd -w 0 fp -t 1 ; sp` gave me special difficulty.
Now it just launches in focus mode, but you can _leave_ focus mode just fine.
I can't iterate on this more today - VS decided that it _needed_ an update ☹️
* [x] I work here
* [x] Is polish
* [x] @cinnamon-msft: We'll need to update the docs to reflect this.
see also: #8888, comments in that thread
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8881
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
* Preserve profile GUID upon item Tag creation.
* Use this GUID rather than the current profile GUID to select an item
upon settings update.
So even if the profile was renamed and the GUID has changed,
the GUID in the tag remains unchanged and can be found
upon discarding.
## Summary of the Pull Request
Check for null before serializing the default terminal. Because the _currentDefaultTerminal is only initialized when the `Launch` page is navigated to, this _could_ be null if you navigate to another page, save, then save again.
## PR Checklist
* [x] Closes#10003
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
It crashed consistently before, it doesn't now.
The bug that caused #9962 resulted in folks getting profiles written to
their settings that didn't contain any identifying information (name or
guid), sometimes multiple times.
These profiles look (somewhat) like this:
```json
{ "colorScheme": "Campbell" },
{},
```
An empty profile serves no purpose -- it shows up in the list as being
named "Default", and it only launches CMD (unless the commandline is the
thing that the user successfully changed.)
We can heal the settings file by simply ignoring those profiles that
have *no identifying information* (a guid or a name that can be
converted into a guid).
Validation
----------
I created a number of profiles that fit this format and made sure that
they were ignored on load and destroyed on save.
## PR Checklist
* [x] Closes an annoyance we discovered after 9962.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10097
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
This PR builds on the `ActionMap` PR (#6900) by leveraging `ActionMap` to serialize actions. From the top down, the process is now as follows:
- `CascadiaSettings`: remove the hack of copying whatever we had for actions before.
- `GlobalAppSettings`: serialize the `ActionMap` to `"actions": []`
- `ActionMap`: iterate over the internal `_ActionMap` (list of actions) and serialize each `Command`
- `Command`: **THIS IS WHERE THE MAGIC HAPPENS!** For _each_ key mapping, serialize an action. Only the first one needs to include the name and icon.
- `ActionAndArgs`: Find the relevant `IActionArgs` parser and serialize the `ActionAndArgs`.
- `ActionArgs`: **ANNOYING CHANGE** Serialize any args that are set. We _need_ each setting to be saved as a `std::optional`. As with inheritance, this allows us to distinguish an explicit setting to the default value (sometimes `null`) vs an implicit "give me the default value". This allows us to serialize only the relevant details of each action, rather than writing _all_ of the args.
## References
- #8100: Inheritance/Layering for lists
- This tracks layering and better serialization for color schemes _and_ actions. This PR resolves half of that issue. The next step is to apply the concepts used in this PR (and #9621) to solve the similar problem for color schemes.
- #6900: Actions page
## Validation Steps Performed
Tests added!
## Summary of the Pull Request
This replaces `ThrottledFunc` with two variants:
* `ThrottledFuncLeading` invokes the callback immediately and blocks further calls for the given duration
* `ThrottledFuncTrailing` blocks calls for the given duration and then invokes the callback
## References
* #9270 - `ThrottledFuncLeading` will allow the pane to flash immediately for a BEL, but block further BELs until the animation finished
## PR Checklist
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* [x] Ensured scrolling still works
## Summary of the Pull Request
Introduces `til::rle`, a vector-like container which stores elements of
type T in a run length encoded format. This allows efficient compaction
of repeated elements within the vector.
## References
* #8000 - Supports buffer rewrite work. A re-use of `til::rle` will be
useful as a column counter as we pursue NxM storage and presentation.
* #3075 - The new iterators allow skipping forward by multiple units,
which wasn't possible under `TextBuffer-/OutputCellIterator`.
Additionally it also allows a bulk insertions.
* #8787 and #410 - High probability this should be `pmr`-ified
like `bitmap` for things like `chafa` and `cacafire`
which are changing the run length frequently.
## PR Checklist
* [x] Closes#8741
* [x] I work here.
* [x] Tests added.
* [x] Tests passed.
## Validation Steps Performed
* [x] Ran `cacafire` in `OpenConsole.exe` and it looked beautiful
* [x] Ran new suite of `RunLengthEncodingTests.cpp`
Co-authored-by: Michael Niksa <miniksa@microsoft.com>
## Summary of the Pull Request
Upgrade the Windows SDK to 19041 by setting `WindowsTargetPlatformMinVersion` to 17763 and `WindowsTargetPlatformVersion` to 19041.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
General usage of the Windows Terminal application appears fine.
## Summary of the Pull Request
This fixes a bug where if you had the `_quake` window open, and you tried to `globalSummon` it (not with the `quakeMode` action, but just with a plain-old `globalSummon` to activate the MRU window), we'd _create a new window_ instead of just summoning the `_quake` window.
## References
* regressed in #9956
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-60325142
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
It's basically a one-line fix, I just had to update the function signature for `_getMostRecentPeasantID` to allow us to use it differently for glomming vs summoning. When glomming, `ignoreQuakeWindow` should be true. When summoning, `ignoreQuakeWindow` should be false.
I'd personally chose to just bind `globalSummon` to <kbd>win+`</kbd>, but _I do as I'm told_.
* [x] I work here
* [x] @cinnamon-msft mentioned this
* [x] Docs
1. The TSFInputControl may get a layout event after it has been removed
from service (and no longer has a XAML tree)
* Two fixes:
* first, guard the layour updater from accessing detached xaml
objects
* second, shut down all pending throttled functions during close
(not destruction!¹)
2. The TermControlAutomationPeer may be destructed before its events
fire.
3. The TermControlAutomationPeer may receive a notification after it has
been detached from XAML (and therefore has no dispatcher).
¹ Close happens before the control is removed from the XAML tree;
destruction happens some time later. We must detach all UI-bound events
in Close so that they don't fire between when we detach and when we
destruct.
Fixes MSFT-32496693
Fixes MSFT-32496158
Fixes MSFT-32509759
Fixes MSFT-32871913
(cherry picked from commit 661fde5937)
This reverts commit a3a2a4102d.
#10046 causes a crash on save. MainPage::UpdateSettings() is unable to update the navigation view's selected item due to an "incorrect parameter". This is particularly strange to see because #10046 only modifies the navigation view's header, not the menu items themselves. Reverting this change fixes that crash (verified).
Reopens#9694
## Summary of the Pull Request
This PR lays the foundation for a new Actions page in the Settings UI as designed in #6900. The Actions page now leverages the `ActionMap` to display all of the key bindings and allow the user to modify the associated key chord or delete the key binding entirely.
## References
#9621 - ActionMap
#9926 - ActionMap serialization
#9428 - ActionMap Spec
#6900 - Actions page
#9427 - Actions page design doc
## Detailed Description of the Pull Request / Additional comments
### Settings Model Changes
- `Command::Copy()` now copies the `ActionAndArgs`
- `ActionMap::RebindKeys()` handles changing the key chord of a key binding. If a conflict occurs, the conflicting key chord is overwritten.
- `ActionMap::DeleteKeyBinding()` "deletes" a key binding by binding "unbound" to the given key chord.
- `ActionMap::KeyBindings()` presents another view (similar to `NameMap`) of the `ActionMap`. It specifically presents a map of key chords to commands. It is generated similar to how `NameMap` is generated.
### Editor Changes
- `Actions.xaml` is mainly split into two parts:
- `ListView` (as before) holds the list of key bindings. We _could_ explore the idea of an items repeater, but the `ListView` seems to provide some niceties with regards to navigating the list via the key board (though none are selectable).
- `DataTemplate` is used to represent each key binding inside the `ListView`. This is tricky because it is bound to a `KeyBindingViewModel` which must provide _all_ context necessary to modify the UI and the settings model. We cannot use names to target UI elements inside this template, so we must make the view model smart and force updates to the UI via changes in the view model.
- `KeyBindingViewModel` is a view model object that controls the UI and the settings model.
There are a number of TODOs in Actions.cpp will be long-term follow-ups and would be nice to have. This includes...
- a binary search by name on `Actions::KeyBindingList`
- presenting an error when the provided key chord is invalid.
## Demo
This is a hotfix to #10048. When the tab renamer is opened, we need to make sure to not immediately steal focus from it.
* [x] closes#10112
* [x] I work here
* [x] tested manually
## Summary of the Pull Request
This is a scoped implementation of "hide on minimize", only to the `_quake` window. When minimized, the `_quake` window won't appear in the taskbar. IT ALSO WON'T APPEAR IN THE TRAY, BECAUSE WE DON'T HAVE ONE YET.
I talked about this with @DHowett, and it seemed cool. Other windows will still minimize normally.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
* minimize to tray: #5727
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-61246940
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - probably yea, but something <sub>something <sub>something</sub></sub>
## Detailed Description of the Pull Request / Additional comments
After playing with it, it is in fact, cool.
ALSO `LOG_IF_WIN32_BOOL_FALSE` should DEFINITELY not be used with `ShowWindow`. [`ShowWindow`](https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-showwindow#return-value) returns false if the window was previously hidden, but doesn't `SetLastError`, so that macro will _throw_.
## Validation Steps Performed
```jsonc
{ "keys": "ctrl+`", "command": { "action": "quakeMode" } },
{ "keys": "ctrl+1", "command": { "action": "globalSummon", "name": "_quake" } },
// { "keys": "ctrl+1", "command": { "action": "globalSummon" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "desktop": "toCurrent" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "toggleVisibility": false } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "dropdownDuration": 2000 } },
{ "keys": "ctrl+2", "command": { "action": "globalSummon", "monitor": "any" } },
// { "keys": "ctrl+3", "command": { "action": "globalSummon", "desktop": "onCurrent" } },
{ "keys": "ctrl+3", "command": { "action": "globalSummon", "monitor": "toMouse" } },
// { "keys": "ctrl+4", "command": { "action": "globalSummon", "desktop": "any" } },
{ "keys": "ctrl+4", "command": { "action": "globalSummon", "monitor": "toMouse", "dropdownDuration": 500 } },
{ "keys": "ctrl+5", "command": { "action": "globalSummon", "dropdownDuration": 500 } },
```
#### ⚠️ this pr targets #9977
## Summary of the Pull Request
This adds support for part of the `monitor` property for `globalSummon`. It also goes a little off-spec:
```json
"monitor": "any"|"toCurrent"|"toMouse"
```
* `monitor`: This controls the monitor that the window will be summoned from/to
- `"any"`: Summon the MRU window, regardless of which monitor it's currently on.
- `"toCurrent"`/omitted: (_default_): Summon the MRU window **TO** the monitor with the current **foreground** window.
- [**NEW**] `"toMouse"`: Summon the MRU window **TO** the monitor where the **mouse** cursor is.
When I was playing with this, It felt like `toMouse` was always what I wanted, not `toCurrent`. We can always just comment that out if we think that's contentious - I'm aware I didn't originally spec that.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-60325291
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated 😢
## Detailed Description of the Pull Request / Additional comments
I made `toMouse` the default because it felt better. fite-me.jpg
## Validation Steps Performed
my ever evolving blob:
```jsonc
{ "keys": "ctrl+`", "command": { "action": "quakeMode" } },
{ "keys": "ctrl+1", "command": { "action": "globalSummon" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "desktop": "toCurrent" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "toggleVisibility": false } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "dropdownDuration": 2000 } },
{ "keys": "ctrl+2", "command": { "action": "globalSummon", "monitor": "any" } },
// { "keys": "ctrl+3", "command": { "action": "globalSummon", "desktop": "onCurrent" } },
{ "keys": "ctrl+3", "command": { "action": "globalSummon", "monitor": "toMouse" } },
// { "keys": "ctrl+4", "command": { "action": "globalSummon", "desktop": "any" } },
{ "keys": "ctrl+4", "command": { "action": "globalSummon", "monitor": "toMouse", "dropdownDuration": 500 } },
{ "keys": "ctrl+5", "command": { "action": "globalSummon", "dropdownDuration": 500 } },
```
## Summary of the Pull Request
Adds the `dropdownDuration` property to `globalSummon`. This controls how fast the window appears on the screen when summoned from minimized. It similarly controls the speed for sliding out of view when the window is dismissed with `"toggleVisibility": true`.
`dropdownDuration` specifies the duration in **milliseconds**. This defaults to `0` for `globalSummon`, and defaults to `200` for `quakeMode`. 200 was picked because, according to [`AnimateWindow`](https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-animatewindow):
> Typically, an animation takes 200 milliseconds to play.
Do note that you won't be able to interact with the window during the animation! Input sent during the dropdown will arrive at the end of the animation, but input sent during the slide-up _won't_. Avoid setting this to large values!
The gifs are in Teams.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-59030824
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I had the following previously in the doc comments, but it feels better in the PR body:
- This was chosen because it was easier to implement and generally nicer than:
* `AnimateWindow`, which would show the window borders for the duration of
the animation, and occasionally just plain not work. Additionally, for
`AnimateWindow` to work, the window much not be visible, so we'd need to
first restore the window, then hide it, then animate it. That would flash
the taskbar.
* `SetWindowRgn` on the root HWND, which caused the xaml content to shift to
the left, and caused a black bar to be drawn on the right of the window.
Presumably, `SetWindowRgn` and `DwmExtendFrameIntoClientArea` did not play
well with each other.
* `SetWindowPos(..., SWP_NOSENDCHANGING)`, which worked the absolute best for
longer animations, and is the closest to the actual implementation of
`AnimateWindow`. This would resize the ROOT window, without sending resizes
to the XAML island, allowing the content to _not_ reflow. but for a
duration of 200ms, would only ever display ~2 frames. That's basically
not even animation anymore, it's now just an "appear". Since that's how
long the default animation is, if felt silly to have it basically not
work by default.
- If a future reader would like to implement this better, **they should feel
free to**, and not mistake my notes here as expertise. These are research
notes into the dark and terrible land that is Win32 programming. I'm no expert.
## Validation Steps Performed
This is the blob of json I'm testing with these days:
```jsonc
{ "keys": "ctrl+`", "command": { "action": "quakeMode" } },
{ "keys": "ctrl+1", "command": { "action": "globalSummon" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "desktop": "toCurrent" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "toggleVisibility": false } },
{ "keys": "ctrl+2", "command": { "action": "globalSummon", "dropdownDuration": 2000 } },
{ "keys": "ctrl+3", "command": { "action": "globalSummon", "desktop": "onCurrent" } },
{ "keys": "ctrl+4", "command": { "action": "globalSummon", "desktop": "any" } },
```
* <kbd>ctrl+\`</kbd> will summon the quake window with a _quick_ animation
* <kbd>ctrl+2</kbd> will summon the window with a s l o w animation
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds a global setting, `experimental.detectHyperlinks`, that controls whether we automatically detect links and make them clickable. Default is set to true.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9981
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
When `detectHyperlinks` is set to false, links do not underline on hover and are not clickable.
While a user is formulating their hex string for a `tabColor` arg
in the CommandPalette, we try to parse the string one char at
a time as it comes in. `ColorFromHexString` doesn't like anything
except a well formed hex string so it'll throw. We can probably eat
any error that comes out of this because we should only care to set
the TabColor once the string provided is a valid hex str.
Closes#10053
Set keyword flags on all events so those sharing a provider with
telemetry do not fire unless tracing is enabled
## PR Checklist
* [x] Closes#10093
* [x] I work here
* [x] Tests passed
* [x] Documentation added in `til.h` about how keywords work and at the
only other site of keywords we define in the Host project tracing
files.
## Detailed Description of the Pull Request / Additional comments
I initially thought that we would need to split providers here to
accomplish this... but @DHowett helped me realize that might be a lot of
additional metadata and bloat binary size. So with help from a friend
from fundamentals, I realized that we could use Keywords to
differentiate here. We can no longer define 0 keywords as that
represents an any/all scenario. Every `TraceLoggingWrite` event now
needs a keyword. When our events have a keyword, they're not included in
any trace. Additionally, when we have an explicit keyword to check that
is different from the ones used for the telemetry pipeline, we can
ensure that we only do "hard work" to generate debug trace data when an
"ALL" type listener like TraceView or Windows Performance Recorder with
our profiles is listening to these providers for ALL keyworded events.
## Validation Steps Performed
- [x] - Built with full release build config to confirm performance is
worse than dev builds BECAUSE of the telemetry event collector camping
our provider and triggering full trace event generation on shared
providers.
- [x] - Built with full release build config to enable statistics
collection and validated trace event collection is excluded and trace
event short-circuits work with this change.
- [x] - Checked that TraceView still sees both telemetry and tracing
events
- [x] - Checked that WPR with our .wprp profile sees both telemetry and
tracing events
Co-authored-by: Josh Soref <jsoref@users.noreply.github.com>
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Upgrade check-spelling to [v0.0.18](https://github.com/check-spelling/check-spelling/releases/tag/v0.0.18)
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
I've replaced the `dictionary` directory with `allow` and `reject`. When terminal got check-spelling, I didn't have a way to do `allow`/`reject` (but they were added a while ago). With this release, the bot will complain about items that are in user managed files that wouldn't be valid, this is mostly `-`s in dictionary files, but it also includes numbers `0`..`9` and `_`. If a specific token needs to be accepted but not its sub-elements, the item should be added to `patterns.txt` instead (`D2DERR_SHADER_COMPILE_FAILED` is an example).
With this version, check-spelling defaults to only considering tokens with at least 3 letters. It's possible to tune it back to 2 (or even 1), but in testing, the 2 character tokens have ended up not being worthwhile. (This can be [adjusted](https://github.com/check-spelling/check-spelling/wiki/Configuration#shortest_word) if it turns out that people manage to misspell two character tokens often enough to justify checking them.)
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I ran a number of passes of the spell checker in https://github.com/check-spelling/terminal/actions (note: I tend to delete this repository, so this link may be dead at some point, and action run logs expire).
Implement PGO in pipelines for AMD64 architecture; supply training test scenarios
## References
- #3075 - Relevant to speed interests there and other linked issues.
## PR Checklist
* [x] Closes#6963
* [x] I work here.
* [x] New UIA Tests added and passed. Manual build runs also tested.
## Detailed Description of the Pull Request / Additional comments
- Creates a new pipeline run for creating instrumented binaries for Profile Guided Optimization (PGO).
- Creates a new suite of UIA tests on the full Windows Terminal app to run PGO training scenarios on instrumented binaries (and incidentally can be used to write other UIA tests later for the full Terminal app.)
- Creates a new NuGet artifact to store trained PGO databases (PGD files) at `Microsoft.Internal.Windows.Terminal.PGODatabase`
- Creates a new NuGet artifact to supply large-scale test content for automated tests at `Microsoft.Internal.Windows.Terminal.TestContent`
- Adjusts the release pipeline to run binaries in PGO optimized mode where content from PGO databases is leveraged at link time to optimize the final release build
The following binaries are trained:
- OpenConsole.exe
- WindowsTerminal.exe
- TerminalApp.dll
- TerminalConnection.dll
- Microsoft.Terminal.Control.dll
- Microsoft.Terminal.Remoting.dll
- Microsoft.Terminal.Settings.Editor.dll
- Microsoft.Terminal.Settings.Model.dll
In the future, adding `<PgoTarget>true</PgoTarget>` to a new `vcxproj` file will automatically enroll the DLL/EXE for PGO instrumentation and optimization going forward.
Two training test scenarios are implemented:
- Smoke test the Terminal by just opening it and typing a bit of text then exiting. (Should help focus on the standard launch path.)
- Optimize bulk text output by launching terminal, outputting `big.txt`, then exiting.
Additional scenarios can be contributed to the `WindowsTerminal_UIATests` project with the `[TestProperty("IsPGO", "true")]` annotation to add them to the suite of scenarios for PGO.
**NOTE:** There are currently no weights applied to the various test scenarios. We will revisit that in the future when/if necessary.
## Validation Steps Performed
- [x] - Training run completed at https://dev.azure.com/ms/terminal/_build?definitionId=492&_a=summary
- [x] - Optimization run completed locally (by forcing `PGOBuildMode` to `Optimize` on my local machine, manually retrieving the databases with NuGet, and building).
- [x] - Validated locally that x86 and ARM64 do not get trained and automatically skip optimization as databases are not present for them.
- [x] - Smoke tested optimized binary versus latest releases. `big.txt` output through CMD is ~11-12seconds prior to PGO and just over 8 seconds with PGO.
## Summary of the Pull Request
Adds the profile icons to the page header. I had to manually create the header, and manually bind it to the `Icon` and `Content` of each `NavViewItem`.
It's important that each `NavViewItem`'s icon is set as an `IconSource`, so that we can bind to it. If it's just a plain old `FontIcon`, then we can't re-use it.
Additionally, I removed the manual sizing of all font icons to font size 12. That would make font icons _tiny_ in the header. Now, they'll properly re-use the size of the `NavigationViewTitleHeaderContentControlTextStyle` in the nav view header. This involved also manually making the icons smaller on the `AddProfile` page and in the `CommandPalette`.
As per usual, images are in Teams
## PR Checklist
* [x] Closes#9694
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Checked (bitmap|font) icons in tabs
* (bitmap|font) icons in the flyout
* (bitmap|font) icons in command palette
* (bitmap|font) icons in the nav view
* (bitmap|font) icons in the header
* (bitmap|font) icons in the add profile page
This is primarily being done to unblock #9223.
Prior to this, we'd validate that the user's `startingDirectory` existed
here. If it was invalid, we'd gracefully fall back to `%USERPROFILE%`.
However, that could cause hangs when combined with WSL. When the WSL
filesystem is slow to respond, we'll end up waiting indefinitely for
their filesystem driver to respond. This can result in the whole terminal
becoming unresponsive.
Similarly, with #9223 we want users to be able to specify WSL paths in a
profile, but this bit of validation logic totally prevents that from working,
because it'll just replace the path with `%USERPROFILE%`.
If the path is eventually invalid, we'll display warning in the
`ConptyConnection`, when the process fails to launch.
Closes#9541Closes#9114
I believe that there is a hidden "default branch" setting in Azure
DevOps, and ours is set to "master". CG only attempts to automatically
inject to builds off the default branch... and because we're a GitHub
repo running builds in AzDO we _can't change what the default branch
is_. Oops.
A redo of #6290. That PR was overkill. In that one, we'd toss focus back to the active control any time that the tab view item got focus. That's maybe not the _best_ solution.
Instead, this PR is precision strikes. We're re-using a lot of what we already have from #9260.
* When the context menu is closed, yeet focus to the control.
* When the renamer is dismissed, yeet focus to the control.
* When the TabViewItem is tapped (meaning no one else handled it), yeet focus to the control.
### checklist
* [x] I work here
* [ ] This is UI so it doesn't have tests
* [x] Closes#3609
* [x] Closes#5750
* [x] Closes#6680
### scenarios:
* [x] focus the window by clicking on the tab -> Control is focused.
* [x] Open the color picker with the context menu, can move the focus inside the picker with the arrow keys.
* [x] Dismiss the picker with esc -> Control is focused.
* [x] Dismiss the picker with enter -> Control is focused.
* [x] Dismiss the renamer with esc -> Control is focused.
* [x] Dismiss the renamer with enter -> Control is focused.
* [x] Dismiss the context menu with esc -> Control is focused.
* [x] Start renaming, then click on the tab -> Rename is committed, Control is focused.
* [x] Start renaming, then click on the text box -> focus is still in the text box
This test has some load bearing specifics in it.
In short, it must trigger multiple boost::small_vector growths. The
vector is reused for the lifetime of the console (!) so it must be
forced to act the way the repro requires.
Oh, and the test needs to be run with Application Verifier +Heap.
This validates the fix in c0ab9cb5b5.
## Summary of the Pull Request
ControlCore::AttachUiaEngine receives a IRenderEngine as a raw pointer,
which TermControl owns. We must ensure that we first destroy the
ControlCore before the UiaEngine instance (both owned by TermControl).
Otherwise a deallocated IRenderEngine is accessed when
ControlCore calls Renderer::TriggerTeardown.
## References
This crash was introduced in #10031.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Run accevent.exe to cause a UiaEngine to be attached to a TermControl.
* Close the current tab
* Ensured no crashes occur
Until there's a "Wait", there's usually only one API message inflight at
a time.
In our quest for performance, we put that single API message in charge
of its own buffer management: instead of allocating buffers on the heap
and deleting them later (storing pointers to them at the far corners of
the earth), it would instead allocate them from small internal pools (if
possible) and only heap allocate (transparently) if necessary. The
pointers flung to the corners of the earth would be pointers (1) back
into the API_MSG or (2) to a heap block owned by boost::small_vector.
It took us months to realize that those bare pointers were being held by
COOKED_READ and RAW_READ and not actually being updated when the API
message was _copied_ as it was shuffled off to the background to become
a "Wait" message.
It turns out that it's trivially possible to crash the console by
sending two API calls--one that waits and one that completes
immediately--when the waiting message or the "wait completer" has a
bunch of dangling pointers in it. It further turns out that some
accessibility software (like JAWS) attaches directly to the console
session, much like winpty and ConEmu and friends. They're trying to read
out the buffer (API call!) and sometimes there's a shell waiting for
input (API call!). Oops.
In this commit, we fix up the message's internal pointers (in lieu of
giving it a proper copy constructor; see GH-10076) and then tell the
wait completion routine (which is going to be a COOKED_READ, RAW_READ,
DirectRead or WriteData) about the new buffer location.
This is a scoped fix that should be replaced (TODO GH-10076) with a
final one after Ask mode.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev eca0875950fd3a9735662474613405e2dc06f485
References GH-10076
Fixes MSFT-33127449
Fixes GH-9692
The ES folks removed support for implicit binary dependencies in test projects, which required our testmd to change to include its dependency on testnetv5.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a2a74747feda018c347ba787e166e8385bb17e47
Related work items: MSFT-31480819
## PR Checklist
* [x] Closes#9920
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
- When opening a profile page and selecting a random pivot, when then navigating away from the profile page to another item and navigating back to the same profile the last selected pivot was still active.
- When opening a profile page and selecting a random pivot, when then navigating away from the profile page to a second profile the last selected pivot was immediately active on the second profile.
- When selecting random pivots and navigating only between other profile pages the last selected pivot was always active on the opened profile page.
What felt a bit strange at first sight was:
- open a profile page, select a random pivot
- start adding a new profile
- the last selected pivot is immediately active and not the "General" pivot what might be the obvious pivot to show when a user wants to add a new profile.
After playing a bit more with this this started to feel ok. Since as a user you might go to "Add new profile" immediately anyway instead of opening other profiles first.
Just explicitly highlighting this last point since maybe someone prefers that we need to make sure to always start with the 'General' pivot when adding a new profile and then this fix is not correct.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
When the client application sets the console input mode with the `ENABLE_MOUSE_INPUT` flag, we send along the appropriate VT sequences to the connected terminal (if there is one).
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#376#6859
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Far manager works
## Summary of the Pull Request
When we parse OSC 9;4, allow a trailing semicolon (i.e. allow `9;4;` or something like `9;4;3;`).
## PR Checklist
* [x] Closes#9960
* [X] Tests added/passed
## Validation Steps Performed
OSC 9;4 sequences with or without trailing semicolons work
This entirely removes `KeyMapping` from the settings model, and builds on the work done in #9543 to consolidate all actions (key bindings and commands) into a unified data structure (`ActionMap`).
## References
#9428 - Spec
#6900 - Actions page
Closes#7441
## Detailed Description of the Pull Request / Additional comments
The important thing here is to remember that we're shifting our philosophy of how to interact/represent actions. Prior to this, the actions arrays in the JSON would be deserialized twice: once for key bindings, and again for commands. By thinking of every entry in the relevant JSON as a `Command`, we can remove a lot of the context switching between working with a key binding vs a command palette item.
#9543 allows us to make that shift. Given the work in that PR, we can now deserialize all of the relevant information from each JSON action item. This allows us to simplify `ActionMap::FromJson` to simply iterate over each JSON action item, deserialize it, and add it to our `ActionMap`.
Internally, our `ActionMap` operates as discussed in #9428 by maintaining a `_KeyMap` that points to an action ID, and using that action ID to retrieve the `Command` from the `_ActionMap`. Adding actions to the `ActionMap` automatically accounts for name/key-chord collisions. A `NameMap` can be constructed when requested; this is for the Command Palette.
Querying the `ActionMap` is fairly straightforward. Helper functions were needed to be able to distinguish an explicit unbinding vs the command not being found in the current layer. Internally, we store explicitly unbound names/key-chords as `ShortcutAction::Invalid` commands. However, we return `nullptr` when a query points to an unbound command. This is done to hide this complexity away from any caller.
The command palette still needs special handling for nested and iterable commands. Thankfully, the expansion of iterable commands is performed on an `IMapView`, so we can just expose `NameMap` as a consolidation of `ActionMap`'s `NameMap` with its parents. The same can be said for exposing key chords in nested commands.
## Validation Steps Performed
All local tests pass.
- Whenever we add a new profile setting from now on we have to update
`Profile::CopySettings` _and_ `CascadiaSettings::DuplicateProfile` 👎
Notes from bug bash (checked bugs have been resolved):
- [ ] The duplicate list can be very long if you have profiles
- [x] DH: "Create new" seems too vague. "New empty profile" or something
seems a little clearer to me.
- [x] There is no deduplication counter for name
- [x] Crash when your settings file is corrupt and we had to fall back
to the defaults and you duplicate a profile
- [x] Crash due to #10003
## PR Checklist
* [x] Closes#9121
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9941
* [x] CLA signed.
## Detailed Description of the Pull Request / Additional comments
The bug is due to us using std::tolower, while the default locale is not user's locale.
The fix here is to use the same approach as upon sorting: lstrcmpi.
While there are additional methods to do locale aware comparison,
here we convert chars to string and call lstrcmpi.
While this approach seems somewhat inefficient it ensures consistency
(with the order of locales that lstrcmi tries to apply internally).
## Summary of the Pull Request
This PR encompasses the first three bugs we found post-#9820.
### A: Mousedown, select, SCROLL does a weird thing with endpoints that doesn't happen in stable
We were using the terminal position to set the selection anchor, when we should have used the pixel position.
This is fixed in 4f4df01.
### B: Trackpad scrolling down with small increments seems buggy
This one's the most complicated. The touchpad sends very many small scroll deltas, less than one row at a time. The control scrollbar can store a `double`, so small deltas can accumulate. Originally, these would accumulate in the scrollbar, and we'd only read that out as an `int` in the scrollbar updater, which is throttled.
In the interactivity split, there's no place for us to store that double. We immediately narrow to an `int` for `ControlInteractivity::_updateScrollbar`.
So this introduces a double inside `ControlInteractivity` as a fake scrollbar, with which to accumulate to.
This is fixed in 33d29fa...0fefc5b
### C: Looks like there's a selection issue when you click and drag too quickly.
The diff for this one is:
<table>
<tr><td>1.8</td><td>main</td></tr>
<tr>
<td>
```c++
if (_singleClickTouchdownPos)
{
// Figure out if the user's moved a quarter of a cell's smaller axis away from the clickdown point
auto& touchdownPoint{ *_singleClickTouchdownPos };
auto distance{ std::sqrtf(std::powf(cursorPosition.X - touchdownPoint.X, 2) + std::powf(cursorPosition.Y - touchdownPoint.Y, 2)) };
const til::size fontSize{ _actualFont.GetSize() };
const auto fontSizeInDips = fontSize.scale(til::math::rounding, 1.0f / _renderEngine->GetScaling());
if (distance >= (std::min(fontSizeInDips.width(), fontSizeInDips.height()) / 4.f))
{
_terminal->SetSelectionAnchor(_GetTerminalPosition(touchdownPoint));
// stop tracking the touchdown point
_singleClickTouchdownPos = std::nullopt;
}
}
```
</td>
<td>
```c++
if (_singleClickTouchdownPos)
{
// Figure out if the user's moved a quarter of a cell's smaller axis away from the clickdown point
auto& touchdownPoint{ *_singleClickTouchdownPos };
float dx = ::base::saturated_cast<float>(pixelPosition.x() - touchdownPoint.x());
float dy = ::base::saturated_cast<float>(pixelPosition.y() - touchdownPoint.y());
auto distance{ std::sqrtf(std::powf(dx, 2) +
std::powf(dy, 2)) };
const auto fontSizeInDips{ _core->FontSizeInDips() };
if (distance >= (std::min(fontSizeInDips.width(), fontSizeInDips.height()) / 4.f))
{
_core->SetSelectionAnchor(terminalPosition);
// stop tracking the touchdown point
_singleClickTouchdownPos = std::nullopt;
}
}
```
</td>
</tr>
</table>
```c++
_terminal->SetSelectionAnchor(_GetTerminalPosition(touchdownPoint));
```
vs
```c++
_core->SetSelectionAnchor(terminalPosition);
```
We're now using the location of the drag event as the selection anchor, instead of the location that the user initially clicked. Oops.
## PR Checklist
* [x] Checks three boxes, though I'll be shocked if they're the last.
* [x] I work here
* [x] Tests added/passed 🎉🎉🎉
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
All three have tests, 🙌🙌🙌🙌
## Validation Steps Performed
Manual, and automated via tests
## Summary of the Pull Request
Let the dropdown menu open downwards if there's enough space, when clicking on the down arrow.
## PR Checklist
* [X] Closes#8924
* [X] CLA signed.
## Detailed Description of the Pull Request / Additional comments
Set the placement of the flyout to BottomEdgeAlignedLeft, as was done when opening the menu from the key binding.
## Validation Steps Performed
Manual tests
## Summary of the Pull Request
This is to mitigate MSFT:33035972. If you call `MoveWindowToDesktop` while an app is set to "Show windows from this app on all desktops", the OS will clear that "Show windows from this app on all desktops" state. But it _won't_ clear that state from the task view, so it'll just plain look broken.
We can mitigate this just by checking if we're already on the current desktop first. "Show windows from this app on all desktops" windows will _always_ be on every desktop, so that API will return true, and we can avoid tearing the state.
## References
* added in #9954
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-60325102
* [x] I work here
* [ ] Tests aren't possible
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* it works again
When syncing terminals across users (i.e. Liveshare shared terminals),
the terminal size is synced. This leads to having unused space around
the terminal which is the same color as the terminal's background
causing confusion as to what space is usable within the terminal.
Instead this change allows consumers to set the background color of the
control, separate from the terminal renderer's background, which makes
it easier to identify the edges of the terminal.
## Summary of the Pull Request
ControlCore's _renderer (IRenderTarget) is allocated as std::unique_ptr,
but is given to Terminal::CreateFromSettings as a reference.
ControlCore::Close deallocates the _renderer, but if ThrottledFuncs
are still scheduled to call ControlCore::UpdatePatternLocations
it'll cause Terminal::UpdatePatterns to be called, which in turn ends up
accessing the deallocated IRenderTarget reference and lead to a crash.
A proper solution with shared pointers is nontrivial and should be
attempted at a later point in time. This solution moves the teardown of
the _renderer into ControlCore::~ControlCore, where we can be certain
that no further strong references are held by ThrottledFuncs.
## PR Checklist
* [x] Closes#9910
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
The crash is a race condition and inherently hard to reproduce.
During validation this PR didn't appear to introduce new crashes.
This PR introduces a mechanism via which DCS data strings can be passed
through directly to the dispatch method that will be handling them, so
the data can be processed as it is received, rather than being buffered
in the state machine. This also simplifies the way string termination is
handled, so it now more closely matches the behaviour of the original
DEC terminals.
* Initial support for DCS sequences was introduced in PR #6328.
* Handling of DCS (and other) C1 controls was added in PR #7340.
* This is a prerequisite for Sixel (#448) and Soft Font (#9164) support.
The way this now works, a `DCS` sequence is dispatched as soon as the
final character of the `VTID` is received. Based on that ID, the
`OutputStateMachineEngine` should forward the call to the corresponding
dispatch method, and its the responsibility of that method to return an
appropriate handler function for the sequence.
From then on, the `StateMachine` will pass on all of the remaining bytes
in the data string to the handler function. When a data string is
terminated (with `CAN`, `SUB`, or `ESC`), the `StateMachine` will pass
on one final `ESC` character to let the handler know that the sequence
is finished. The handler can also end a sequence prematurely by
returning false, and then all remaining data bytes will be ignored.
Note that once a `DCS` sequence has been dispatched, it's not possible
to abort the data string. Both `CAN` and `SUB` are considered valid
forms of termination, and an `ESC` doesn't necessarily have to be
followed by a `\` for the string terminator. This is because the data
string is typically processed as it's received. For example, when
outputting a Sixel image, you wouldn't erase the parts that had already
been displayed if the data string is terminated early.
With this new way of handling the string termination, I was also able to
simplify some of the `StateMachine` processing, and get rid of a few
states that are no longer necessary. These changes don't apply to the
`OSC` sequences, though, since we're more likely to want to match the
XTerm behavior for those cases (which requires a valid `ST` control for
the sequence to be accepted).
## Validation Steps Performed
For the unit tests, I've had to make a few changes to some of the
`OutputEngineTests` to account for the updated `StateMachine`
processing. I've also added a new `StateMachineTest` to confirm that the
data strings are correctly passed through to the string handler under
all forms of termination.
To test whether the framework is actually usable, I've been working on
DRCS Soft Font support branched off of this PR, and haven't encountered
any problems. To test the throughput speed, I also hacked together a
basic Sixel parser, and that seemed to perform reasonably well.
Closes#7316
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
👋 Just a minor change to fix an outdated link.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
N/A - subject matter expert
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Original link was demised late 2020. Updated link to be correct.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This adds a `toggleVisibility` parameter to `globalSummon`.
* When `true` (default): when you press the global summon keybinding, and the window is currently the foreground window, we'll minimize the window.
* When `false`, we'll just do nothing.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Checks a box in #8888
* [x] closes https://github.com/microsoft/terminal/projects/5#card-59030814
* [x] I work here
* [ ] No tests for this one.
* [ ] yes yes eventually I'll come back on the docs
## Detailed Description of the Pull Request / Additional comments
I've got nothing extra to add here. This one's pretty simple. I'm only targeting #9954 since that one laid so much foundation to build on, with the `SummonBehavior`
## Validation Steps Performed
Played with this for a while, and it's amazing.
This adds support for the `desktop` param to the `globalSummon` action. It accepts 3 values:
* `toCurrent` (default): The window moves to the current desktop when it's summoned
* `any`: We don't care what desktop the window is on. We'll go to the desktop the window is on when we summon it.
* `onCurrent`: We'll only try to summon the MRU window on this desktop when summoning a window.
* When combined with `name`, if there's a window matching `name`, we'll move it to this desktop.
* If there's not a window on this desktop, and `name` is omitted, then we'll make a new window.
`quakeMode` was also updated to use `toCurrent` behavior by default.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Checks some boxes in #8888
* [x] closes https://github.com/microsoft/terminal/projects/5#card-59030845
* [x] I work here
* [x] Tests added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
S/O to https://github.com/microsoft/PowerToys, who graciously let us use `VirtualDesktopUtils` for figuring out what desktop is the current desktop. Yea, that's all we needed that entire file for. No, there isn't an API for this (_surprised-pikachu.png_)
## Validation Steps Performed
Played with this for a while, and it's amazing.
Adds support for two new actions:
* `globalSummon`, which can be used to activate a window using a _global_ (READ: OS-level) hotkey.
- accepts an optional `name` argument. When provided, this will attempt to summon with the given name. When omitted, we'll try to summon the most recent window.
* `quakeMode` which is `globalSummon` for the `_quake` window.
These actions are stored in the actions array, but are read by the `WindowsTerminal` level and bound to the OS in `IslandWindow`. The monarch registers for these keybindings with the OS. When one is pressed, the monarch will recieve a `WM_HOTKEY` message. It'll use that to look up the corresponding action args. It'll use those to try and summon the right window.
## References
* #8888: Quake mode megathread
* #9274: Spec (**guys seriously i just need one more ✔️**)
* #9785: The start of granting "\_quake" super powers
## PR Checklist
* [x] Closes#653 - I'm gonna say this closes it for now, though we have _many_ follow-ups in #8888
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Validated that it works with `win` keys
* Validated that it works without `win` keys
* Validated that it hot-reloads
* Validated that it moves to the new monarch
* Validated that you can bind both `globalSummon` and `quakeMode` at the same time and do different things
* Validated that you can bind `globalSummon` with a name and it creates that name if it doesn't already exist
This PR aims to optimize the text analysis process by breaking the text
into simple & complex runs according to the result of
`GetTextComplexity`. For simple runs, we can skip certain processing
steps to improve the analysis performance.
Previous to this PR, we rely on the result of `AnalyzeBidi`,
`AnalyzeScript` and `AnalyzeNumberSubstitution` to both break the text
into different runs and attach the corresponding
bidi/script/number_substitution information to the run. Thanks to #6695
we have the chance to skip the expensive analysis process when we found
the *entire text* is determined to be simple.
Inspired by https://github.com/microsoft/cascadia-code/issues/411 and
discussions in #9156, I found that the "entire text simplicity" is often
hard to meet. In order to fully utilize the complexity information of
the text, we need to first break the text into simple & complex ranges.
These ranges are also the initial runs prior to the
bidi/script/number_substitution analysis. This way we can skip the text
analysis for simple runs to speed up the process.
VALIDATION
Build & run cmatrix, cacafire, cat big.txt with it.
Initial simple run PR: #6695Closes#9156
#9962 was caused by a serialization bug. _Technically_, `ToJson` works
as intended: if the current layer has any values set, write them out to
the json. However, on first load, the dynamic profile `Profile` objects
are actually empty (because they inherit from base layer, then the
dynamic profile generator). This means that `ToJson` writes the dynamic
profiles as empty objects `{}`. Then, on reload, we see that the dynamic
profiles aren't in the JSON, and we write them again.
To get around this issue, we added a simple check to `Profile::ToJson`:
if we have a source, make sure we write out the name, guid, hidden, and
source. This is intended to align with `Profile::GenerateStub`.
Closes#9962
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes code health failure since 66b9b9d6f1
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Implement dropdown menu for choosing a default terminal application from inside the Windows Terminal Settings UI
## PR Checklist
* [x] Closes#9463
* [x] I work here.
* [x] Manual tests passed
* [x] https://github.com/MicrosoftDocs/terminal/issues/314 (and cross reference #9462)
## Detailed Description of the Pull Request / Additional comments
- Adds dropdown menu and a template card for displaying the available default applications (using the same lookup code as the console property sheet `console.dll`)
- Adds model to TSM for adapting the data for display and binding on XAML
- Lookup occurs on every page reload. Persistence only happens on Save Changes.
- Manifest changed for Terminal to add capability to opt-out of registry redirection so we can edit this setting
## Validation Steps Performed
- [x] Flipped the menu and pressed Save Changes and launched cmd from run box... it moved between the two.
- [x] Flipped system theme from light to dark and ensured secondary color looked good
- [x] Flipped the status with a different mechanism (conhost propsheet) and then reopened settings page and confirmed it loaded the updated status
## Summary of the Pull Request
I came across a few build system bug fixes, which served their purpose now that VS 16.9 has been released.
## PR Checklist
* [x] I work here
* [x] Project still compiles
## Summary of the Pull Request
We don't want it acting as the "most recent window" for windowing behavior.
The most recent window should always be some other window.
This is being made as an atomic commit because we're probably 50% sure on this
one. Maybe people do want new tabs to open up in the quake window! If they're
running from the commandline, that's easy. If they're running from the shell
context menu, that's **H**ard / impossible currently. $20 someone asks for
that if we ship this. That of course might just fall into "explorer context
menu settings" though.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Checks a box in #8888
* [x] closes https://github.com/microsoft/terminal/projects/5#card-59030791
* [x] I work here
* [x] Tests added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I mean, this one's super straightforward, not sure what else there is to add.
## Validation Steps Performed
Played with this, it works exactly as you'd think.
When we encounter clipboard input that cannot be mapped to a keyboard
key, we try our best to map it to an event. If if is an alphanumeric
character or a wide glyph (per the old width algorithm), we will pass it
through as the UnicodeChar of a key event. If it's *not* wide and *not*
alphanumeric, we will synthesize a set of Alt+NumPad events.
Those events comprise a set containing...
1. Alt Down (modifiers = LAlt, UnicodeChar = 0)
2. Numpad 0 Down/Up (modifiers = LAlt, UnicodeChar = 0)
3. Numpad 1 Down/Up (modifiers = LAlt, UnicodeChar = 0)
4. Numpad 2 Down/Up (modifiers = LAlt, UnicodeChar = 0)
5. Alt Up (modifiers = 0, UnicodeChar = [THE CHARACTER])
Because of event group 5, application developers seem to have taken a
dependency on receiving Alt Up + Character and don't seek to recompose
the original character from its numpad representation.
In pull request GH-8035 (!5394370), we stripped the old width algorithm
out and replaced it with a lookup table (finally!). Unfortunately, that
broke clipboard input for Chinese text as it was no longer considered
"Wide" for the purposes of detecting whether we should use numpad
events.
This commit introduces a version of GetQuickCharWidth that fulfills the
exact contract CharToKeyEvents needs, and doesn't answer for a codepoint
more. We'll use it in Windows to fix MSFT-32901370.
The Terminal analogue of this bug, GH-9052, is fixed by *never emitting
numpad events again.* We think this is okay because it looks like nobody
was ever handling numpad events... and that we were only using them as a
way to communicate within conhost (which we're *also* not using) and any
public exposition of event 5 as a contract was unintended.
VALIDATION
----------
I took this new implementation (with an early return) and the old
implementation and compared whether they would yield a numpad event or a
key event over the entire supported codepoint space [0000..FFFF].
They matched.
Fixes MSFT-32901370
Fixes GH-9052
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 224751bbb061f5f59d794c2c9bdac5a9674ebde6
## Summary of the Pull Request
Brace yourselves, it's finally here. This PR does the dirty work of splitting the monolithic `TermControl` into three components. These components are:
* `ControlCore`: This encapsulates the `Terminal` instance, the `DxEngine` and `Renderer`, and the `Connection`. This is intended to everything that someone might need to stand up a terminal instance in a control, but without any regard for how the UX works.
* `ControlInteractivity`: This is a wrapper for the `ControlCore`, which holds the logic for things like double-click, right click copy/paste, selection, etc. This is intended to be a UI framework-independent abstraction. The methods this layer exposes can be called the same from both the WinUI TermControl and the WPF control.
* `TermControl`: This is the UWP control. It's got a Core and Interactivity inside it, which it uses for the actual logic of the terminal itself. TermControl's main responsibility is now
By splitting into smaller pieces, it will enable us to
* write unit tests for the `Core` and `Interactivity` bits, which we desparately need
* Combine `ControlCore` and `ControlInteractivity` in an out-of-proc core process in the future, to enable tab tearout.
However, we're not doing that work quite yet. There's still lots of work to be done to enable that, thought this is likely the biggest portion.
Ideally, this would just be methods moved wholesale from one file to another. Unfortunately, there are a bunch of cases where that didn't work as well as expected. Especially when trying to better enforce the boundary between the classes.
We've got a couple tests here that I've added. These are partially examples, and partially things I ran into while implementing this. A bunch of things from #7001 can go in now that we have this.
This PR is gonna be a huge pain to review - 38 files with 3,730 additions and 1,661 deletions is nothing to scoff at. It will also conflict 100% with anything that's targeting `TermControl`. I'm hoping we can review this over the course of the next week and just be done with it, and leave plenty of runway for 1.9 bugs in post.
## References
* In pursuit of #1256
* Proc Model: #5000
* https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes#6842
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760249
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760258
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* I don't love the names `ControlCore` and `ControlInteractivity`. Open to other names.
* I added a `ICoreState` interface for "properties that come from the `ControlCore`, but consumers of the `TermControl` need to know". In the future, these will all need to be handled specially, because they might involve an RPC call to retrieve the info from the core (or cache it) in the window process.
* I've added more `EventArgs` to make more events proper `TypedEvent`s.
* I've changed how the TerminalApp layer requests updated TaskbarProgress state. It doesn't need to pump TermControl to raise a new event anymore.
* ~~Something that snuck into this branch in the very long history is the switch to `DCompositionCreateSurfaceHandle` for the `DxEngine`. @miniksa wrote this originally in 30b8335, I'm just finally committing it here. We'll need that in the future for the out-of-proc stuff.~~
* I reverted this in c113b65d9. We can revert _that_ commit when we want to come back to it.
* I've changed the acrylic handler a decent amount. But added tests!
* All the `ThrottledFunc` things are left in `TermControl`. Some might be able to move down into core/interactivity, but once we figure out how to use a different kind of Dispatcher (because a UI thread won't necessarily exist for those components).
* I've undoubtably messed up the merging of the locking around the appearance config stuff recently
## Validation Steps Performed
I've got a rolling list in https://github.com/microsoft/terminal/issues/6842#issuecomment-810990460 that I'm updating as I go.
## Summary of the Pull Request
This PR adds some special behavior to the window named "\_quake".
* When creating the quake window, it ignores "initialRows" and "initialCols" and opens on the top half of the monitor.
- It uses `initialPosition` to determine which monitor this is
* It cannot be moved
* It can only be vertically resized on the bottom border.
* It's always in focus mode.
- We should probably have an issue tracking "Allow showing tabs in focus mode"? Maybe?
- This one element is maybe the one I'm least attached to
When renaming a window to "\_quake", it adopts all those behaviors as well. It does not exit focus mode when leaving QM, nor does it resize back. That seemed unnecessary.
## References
* As spec'ed in #9274
* See also #8888
## PR Checklist
* [x] In the pursuit of #653
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated, but I'm not gonna do any of that till quake mode is totally done.
## Detailed Description of the Pull Request / Additional comments
Note that this doesn't do things like:
* dropdown
* global hotkey summon
* summon to the current monitor
* summon to the current desktop
I'm doing #653 _very_ piecemeal, to try and make the PRs less egregious.
## Validation Steps Performed
* validated that center on launch still works
* validated that QM works on different monitors based on `initialPosition`
* validated entering/exiting QM behaves as expected
## TODO!
* [ ] When snapping the quake window between desktops with <kbd>win+shift+arrow</kbd>, the window doesn't horizontally re-size to the new monitor dimensions. It should.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9706
* [x] CLA signed.
* [ ] Tests added/passed
* [x] Documentation updated here: https://github.com/MicrosoftDocs/terminal/pull/313
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Added global flag named `trimBlockSelection` set to `false` by default.
The setting was added to Interactions menu of the SUI.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8374
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
The majority of the work was already done earlier.
The fix is only in _SetFocusedTab, that runs asynchronously
and thus might result in a race or even overflow.
All other changes are decorative.
## Validation Steps Performed
UT and manual tests
I added a `RenameSucceededText` property to the `TerminalPage` which returns the
formatted message `Successfully renamed window to "{WindowNameForDisplay()}"`
This _doesn't_ pop the dialog when you `wt -w foo` for the first time. Only
_subsequent_ renames.
## References
* Added in #9662
* Closes#9804
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/653-quake-mode/doc/specs/%23653%20-%20Quake%20Mode/%23653%20-%20Quake%20Mode.md) ⇐
## Summary of the Pull Request
After reading through 114+ comments in #653 and related issues, I think I've finally wrapped my head around all the possible scenarios for quake mode. <!-- Speak now or forever hold your peace. --> This also includes "minimize to tray", because the two are a powerful combination. With the work already prototyped in [`dev/migrie/f/653-QUAKE-MODE`](https://github.com/microsoft/terminal/tree/dev/migrie/f/653-QUAKE-MODE), [I'm starting to believe](https://j.gifs.com/58vKNx.gif) that we could actually land this in 2.0.
### Abstract
> Many existing terminals support a feature whereby a user can press a keybinding
> anywhere in the OS, and summon their terminal application. Oftentimes the act of
> summoning this window is accompanied by a "dropdown" animation, where the window
> slides in to view from the top of the screen. This global summon action is often
> referred to as "quake mode", a reference to the videogame Quake who's console
> slid in from the top.
>
> This spec addresses both of the following two issues:
> * "Quake Mode" ([#653])
> * "Minimize to tray" ([#5727])
## PR Checklist
* [x] Specs: #653, #5727
* [x] References: #5000, #4472, #2227, #7240, #8135
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
When we resize the text buffer, initialize the buffer with the
_default_¹ attributes, not the _current_ ones. If we use the current
attributes, then we can get into scenarios where something like `vim` is
running, and left the attributes set to something other than the
defaults, and when we resized the buffer, we'd fill it up with color, as
opposed to whatever the default would be.
This PR instead initializes the buffers with the default colors. It also
makes sure to set the active attributes of the newly created buffers
back to whatever the current attributes of the old buffer were.
[1]: For the Terminal, the default attributes are "default on default".
For conhost, the default attributes are whatever the result of
`Settings::GetDefaultAttributes` is, which could be any combo of the
legacy indices and the default color.
## PR Checklist
* [x] Closes#3848
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
## Summary of the Pull Request
Allow schemes to be previewed as the user hovers over them in the Command Palette.
## References
* Branched off of #8392, which is why the commit history is so polluted. 330a8e8 : 544b2fd has the interesting commits
* #5400: cmdpal megathread
### Potential follow-ups
* changing the font size
* changing the font face
* changing the opacity of acrylic
## PR Checklist
* [x] Closes#6689, a last straggling FHL PR
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated - I don't think so
## Detailed Description of the Pull Request / Additional comments
This works by inserting a "preview" `TerminalSettings` into the settings hierarchy, before the `TermControl`'s runtime settings, and after the ones from the actual `CascadiaSettings`. This allows us to modify that preview settings object, then discard it when we're done with the preview.
This could also be used for other settings in the future - I built it to be extensible to other `ShortcutAction`s, though I haven't implemented those yet.
## Validation Steps Performed
* Select a colorscheme - it becomes the active one
* `colortool -x <scheme>` after selecting a scheme - colortool overrides the selected scheme
* Select a colorscheme after a `colortool -x <scheme>` after selecting a scheme - the scheme in the palette becomes the active one
* Pressing <kbd>esc</kbd> at any point to dismiss the command palette - scheme returns to the previous one
* reloading the settings - returns to the scheme in the settings
* Improved the clarity of the extra step involving
generation of a clang-format.exe when using VisualStudio
* Added Get-Format function to OpenConsole.psm1 and
updated the documentation accordingly.
Closes#9777.
## Summary of the Pull Request
Remove an unnecessary check in `Profiles.cpp` that was preventing us from enabling the text box and browse button when the user unchecks 'use parent process directory'
## PR Checklist
* [x] Closes#9847
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Played around with it and it works.
## Summary of the Pull Request
Add the "Close other tabs"/"Close tabs to the right" menu items straight to the tab context menu to work around #8238.
We can't add them into a dedicated sub-menu until the upstream crash is fixed.
## References
#8238
## PR Checklist
* [X] Closes#8238
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
Moved the creation of the close menu items to a single function. Once the originating crash is fixed, the sub-menu can be restored by just replacing a few lines of code.
## Validation Steps Performed
There is a bug in the compiler that we trip over when we handle the
exception generated by Package::Current inside a coroutine. It appears
to destruct an invalid instance of winrt::factory_guard_count.
Learned from the compiler folks: "coroutine frame pointer wasn't being
stored ... properly".
Fixes#9821
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
CONTRIBUTING.md currently has documentation suggesting to file a 'Community Guidance Request' if a user doesn't know how to do something. This issue was identified by @hessedoneen in #9765 . Per @zadjii-msft this option has never really existed, and should be struck from CONTRIBUTING.md . This PR does just that.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9765
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Review CONTRIBUTING.md and see that it no longer refers to filing 'Community Guidance Requests'
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9836
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
Not sure what is the reason for handling right button.
But delaying it to PointerReleased seems not to regress anything.
## Summary of the Pull Request
The "virtual bottom" marks the last line of the mutable viewport area, which is the part of the buffer that VT sequences can write to. This region should typically only move downwards, as new lines are added to the buffer, but there were a number of cases where it was incorrectly being moved up. This PR attempts to fix that.
## PR Checklist
* [x] Closes#9754
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #9754
## Detailed Description of the Pull Request / Additional comments
When a call is made to `UpdateBottom`, we now clamp the value so it's at least as low as the current viewport bottom (i.e. if the viewport has moved down, we want the virtual bottom to move down too), but no lower than the bottom of the buffer (we don't want it to be out of range).
There is one special case where we do actually want the virtual bottom to move up - when the scrollback has been cleared with an `ED3` escape sequence. So in that case we needed a new `ConGetSet` API (`ResetBottom`) to reset the virtual bottom to the top of the buffer (essentially one less than the viewport height, since the virtual bottom points to the last line of the viewport).
## Validation Steps Performed
I had to reset the virtual bottom manually in some parts of the `ScreenBufferTests`, since some of the tests were relying on the virtual bottom being automatically reset when the viewport was reset, which is no longer the case.
I've also added a new test to verify that the virtual bottom doesn't move upwards if an update is triggered while the visible viewport is scrolled up. This essentially reproduces the test case from issue #9754, which I've also manually confirmed is fixed.
Add flag that will ensure we do not handoff to a registered default console. Also for a bonus, allow double-click launches or explicit command line launches of conhost.exe with a binary argument to open with the inbox one.
## PR Checklist
* [x] Closes#9791
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* [x] Automated tests for parsing
* [x] Enable defapp, double click conhost.exe, opens as itself
* [x] Enable defapp, run conhost.exe runbox, opens as itself
* [x] Enable defapp, run conhost.exe powershell.exe runbox, opens as itself
* [x] Runbox cmd.exe/pwsh.exe trigger defapp handoff to Terminal
* [x] Shortcut to cmd.exe/pwsh.exe trigger defapp handoff to Terminal
* [x] Use CHOP tool to launch conhost with a server handle triggers handoff to Terminal
* [x] Use CHOP tool to launch conhost with a server handle and -ForceNoHandoff opens as itself
## Summary of the Pull Request
Does what it says on the can. People can now use `win` in a keybinding to
indicate that the chord needs <kbd>win</kbd>.
## References
* Done for #653
* See also #8888
## PR Checklist
* [x] Closes#3184
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
For the record, I hate this. But it's great for quake mode, so _meh_. There's
shockingly more win keys claimed then you think - many more than the shortcut
guide even shows.
* `win+b`: Focus the tray?
* `win+t`: Focus the taskbar
* `win+p`: Project...
* `win+c`: The powertoys color picker
* `win+v`: cloud clipboard
So the list of valid combos is vanishingly small. It's all about that <kbd>win+~</kbd>
## Validation Steps Performed
Bound
```json
{ "keys": [ "win+`" ], "command": "commandPalette" },
```
and yea, it works as expected
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9714
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Attempts to generate a name Profile X, where X is the index of the new profile (1-based).
As long as name is already taken, generates new name by incrementing X by 1
## Summary of the Pull Request
Clearly, I didn't run these tests on my last commit where I made the toasts lazy-load.
## References
* broken in in #9662
*
## PR Checklist
* [x] Closes#9769
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
For whatever reason, these tests are unhappy running back to back, but are just fine running isolated.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9776
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Use `ThrottledFunc` in `TermControl` to limit bell emission callback to one per second.
Add names to threads to make debugging a slight bit easier.
## PR Checklist
* [x] Closes personal todo item.
* [x] I work here.
* [x] Tested manually.
## Detailed Description of the Pull Request / Additional comments
Thread descriptions show up as names in both the Visual Studio debugger, WinDBG debugger, and Windows Performance Analyzer. This makes it faster and easier to identify threads of interest in our processes.
## Validation Steps Performed
* [x] Checked threads were named in OpenConsole.exe running in classic conhost window mode under VS debug
* [x] Checked threads were named in OpenConsole.exe running in conpty mode under VS debug
* [x] Checked threads were named in WindowsTerminal.exe (for a few of the threads around connections)
* [x] Checked that we could also see it in WinDBG
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This change cleans up the Fullscreen implementation for both conhost and Terminal, improving the restore position (where the window goes when exiting fullscreen).
Prior to this change the window wasn't guaranteed to restore somewhere on the window's current monitor when exiting fullscreen. With this change the window will restore always to its current monitor, at a reasonable location (and will 'double restore' (to fullscreen->maximize->restore) after monitor changes while fullscreen, which is the expected user behavior.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9746
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
A fullscreen window's monitor can change.
- Win+Shift+left/right migrates a window between monitors.
- User could open settings, display, and move the monitor or change its DPI.
- The monitor could be unplugged.
- The session could be remote and be disconnected.
A fullscreen window stores a 'restore position' when entering fullscreen, used to move the window back 'where it was'. BUT, its unexpected for the window to exit fullscreen and jump to another monitor. This means its previous position must be migrated from the old monitor's work area to the new monitor's work area.
If a window is maximized, it is sized to the work area. Like with fullscreen, a maximized window has a 'restore position', though unlike with fullscreen the restore position for maximized is stored by the system itself. Migration in cases where a maximized (or fullscreen) window's monitor changes is also taken care of by the system. To restore 'safely' to maximized (after changing window styles) a window must only `SetWindowPos(SWP_FRAMECHANGED)`. While technically a maximized window that becomes fullscreen 'is still maximized' (from Win32's perspective), its prudent to also `ShowWindow(SW_MAXIMIZED)` prior to `SWP_FRAMECHANGED` (to explicitly make the window maximized).
If not restoring to maximized, the restore position is adjusted by the new/ old work area. Additionally, the new/ old window DPI is used to adjust the size of the window by the DPI change (keeping the window's logical size the same).
- The work area origin is checked first (shifting window rect by the change in origin)
- The DPI is checked next, changing right/ bottom (size only)
- Each edge of the window is compared against the corresponding edge of the work area, nudging the window back on-screen if hanging offscreen. By shifting right before left, bottom before top, the top-left is guaranteed on-screen.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tried it out. Seemed to work on my machine.
Jk, ran conhost/ terminal on mixed DPI system, max (or not), fullscreen, win+shift+left/ exit fullscreen/ maximize. Monitor unplug, etc.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9787
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Validation Steps Performed
* [x] single click = no selection
* [x] single click and drag = selection starting from first point
* [x] single click in unfocused pane and drag = focus pane, selection starting from first point
* [x] double-click = selects a whole word
* [x] triple-click = selects a whole line
* [x] double-click and drag = selects a whole word, drag selects whole words
* [x] triple-click and drag = selects a whole line, drag selects whole lines
* [x] Shift single-click = defines start point
* [x] second Shift single-click = defines end point
* [x] Shift double-click = selects entire word
* [x] Shift triple-click = selects entire line
* [x] Shift double-click and drag = selects entire word, drag selects whole words
* [x] Mouse mode: Shift single-click = defines start point
* [x] Mouse mode: second Shift single-click = defines end point
* [x] Mouse mode: Shift double-click = selects entire word
* [x] Mouse mode: Shift triple-click = selects entire line
* [x] Mouse mode: Shift double-click and drag = selects entire word, drag selects whole words
* [x] With existing selection: single-click outside the selection and drag = establishes a new selection starting from the click point
* [x] Click-drag to set selection, shift-click-drag outside of selection = extend selection while dragging
This is required to maintain the modality of the dialogs, which we lost
when we moved from Pickers to IFileDialog. The HWND hosting Window API
we dreamed up is incompatible with IModalDialog, because IModalDialog
requires the HWND immediately upon `Show`. We're smuggling it in a
uint64, as is tradition.
zadjii-msft noticed this in #9760.
This PR removes the `GetConsoleCursorInfo` and `SetConsoleCursorInfo`
methods from the `ConGetSet` interface, and the `GetScrollingRegion`
method from the `SCREEN_INFORMATION` class. None of these methods are
used anymore.
PR #2764 removed the last usage of `GetScrollingRegion`.
The `Get/SetConsoleCursorInfo` methods don't seem to have ever been used
in the time that the terminal code has been open source, so whatever
purpose they originally served must have been replaced a long time ago.
The `GetScrollingRegion` method was originally called from the
`ScrollRegion` function, but that usage was removed in PR #2764 when the
margin handling was moved to a higher level.
I've checked that the code still compiles.
Closes#9771
"ctrl+numpad_plus" command now increases font size and
"ctrl+numpad_minus" command now decreases font size.
Before this only "ctrl+=" and "ctrl+-" controlled font size. Increase in
font size follows previous convention where zooms in arbitrarily large,
but decrease in font size is capped.
## Validation Steps Performed
I first ran "ctrl+=" and "ctrl+-" in my terminal to verify its behavior,
then compared that against "ctrl+numpad_plus" and "ctrl+"numpad_minus".
Both increased and decreased the font size by the same amount, and both
appeared to have a cap for how small they could get, but did not appear
to have a cap for how big they could get.
Closes#7518
The red close button animation fades to gray then to transparent, when
standard behavior skips the gray part. I manually tested in light/dark/high
contrast mode.
Closes#9762
Using Pickers from an elevated application yields an
ERROR_ACCESS_DENIED. Of course it does: it was designed for the modern
app platform.
Using the common dialog infrastructure has some downsides¹, but it
doesn't crash and is just as flexible.
I've added some fun templated functions that help us with the
complexity.
Fixes#8957
¹You've got to use raw COM, and it runs in-proc instead of out-of-proc.
## Validation Steps Performed
I tested every picker.
It will be a different color than the background, so it will look less
weird when it's unfocused. It also fixes the bug where the navigation
menu is transparent when acrylic is disabled systemwide.
Fixes#9337
This pull request adds an appearance configuration object to our
settings model and app lib, allowing the control to be rendered
differently depending on its state, and then uses it to add support for
an "unfocused" appearance that the terminal will use when it's not in
focus.
To accomplish this, we isolated the appearance-related settings from
Profile (into AppearanceConfig) and TerminalSettings (into the
IControlAppearance and ICoreAppearance interfaces). A bunch of work was
done to make inheritance work.
The unfocused appearance inherits from the focused one _for that
profile_. This is important: If you define a
defaults.unfocusedAppearance, it will apply all of defaults' settings to
any leaf profile when a terminal in that profile is out of focus.
Specified in #8345Closes#3062Closes#2316
Reduce instances of font fallback dialog through package font loading,
basic name trimming, and revised fallback test
- Adjusts the font dialog to only show when we attempt last-chance
resolution from our hardcoded list of font names with a flag instead
of with a string comparison by name
- Adds a resolution step to trim the font name by word from the end and
retry to attempt to resolve a proper font that just has a weight
suffix
- Adds a second font collection to font loading that will attempt to
locate all TTF files sitting next to our binary, like in our package
- [x] Wrote my font preference in the JSON as `Cascadia Code Heavy` and
watched it quietly resolve to just `Cascadia Code` without the dialog.
- [x] Put a font that isn't registered with the system into the layout
directory for the package, set it as my desired font in Terminal, and
watched it load just fine.
- [x] Try a font name with different casing and see if dialog doesn't
pop anymore
- [x] Try a font with different (localized) names like ＭＳ ゴシック and
see if dialog doesn't pop anymore
- [x] Check Win7 with WPF target
Closes#9375
This commit fixes two issues:
1. We were pushing ConsoleWaitBlocks into the wait queue before they
were fully constructed. This resulted in the wait being called before
it even had an API message in it. [MSFT-24113101]
2. Drawing DBCS characters and resizing (a lot) would cause a crash
because of an invalid DBCS cell state. This hits in both Terminal and
conhost. [MSFT-17364373] [GH-4907]
The DBCS state check was promoted from an NT_ASSERT (which never fired
in release) to a FAIL_FAST in !1794053. The console kept chugging along
without failing in fre for all those years.
Fixes MSFT-24113101
Fixes MSFT-17364373
Fixes GH-4907 Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 108e746630749aa7851dd813b19e013ae31ef0db
## Summary of the Pull Request
Make sure that the window renamer and other toasts follow the requested app theme. We accomplish this by doing something similar to what we do with ContentDialogs. Since TeachingTips aren't in the same XAML root, we have to traverse the entire tree upwards setting RequestedTheme. If we don't, then we'll update the background color of the TeachingTip, but not the text inside it.
## References
* Added in #9662 and #9523
## PR Checklist
* [x] Closes#9717
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested with system theme light & dark, and `theme` set to `light, dark, and unset, and verified that they worked as expected.
## Summary of the Pull Request
Huh, I guess I missed making the window renamer light-dismissable. This is a oneline fix for that.
Light dismissing is treated as a _cancel_, not as a commit.
## References
* Added in #9662
## PR Checklist
* [x] Closes#9718
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
This feels right.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9725
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Validation Steps Performed
* [x] single click = no selection
* [x] single click and drag = selection starting from first point
* [x] single click in unfocused pane and drag = focus pane, selection starting from first point
* [x] double-click = selects a whole word
* [x] triple-click = selects a whole line
* [x] double-click and drag = selects a whole word, drag selects whole words
* [x] triple-click and drag = selects a whole line, drag selects whole lines
* [x] Shift single-click = defines start point
* [x] second Shift single-click = defines end point
* [x] Shift double-click = selects entire word
* [x] Shift triple-click = selects entire line
* [x] Shift double-click and drag = selects entire word, drag selects whole words
* [x] Mouse mode: Shift single-click = defines start point
* [x] Mouse mode: second Shift single-click = defines end point
* [x] Mouse mode: Shift double-click = selects entire word
* [x] Mouse mode: Shift triple-click = selects entire line
* [x] Mouse mode: Shift double-click and drag = selects entire word, drag selects whole words
* [x] With existing selection: single-click outside the selection and drag = establishes a new selection starting from the click point
## Summary of the Pull Request
In exactly the same fashion as the tab renamer, handle <kbd>Enter</kbd> for committing the rename, and <kbd>Escape</kbd> for dismissing the rename.
## References
* Added in #9662
## PR Checklist
* [x] Closes#9720
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Played with it - this feels good.
## Summary of the Pull Request
ThrottledFunc previously created a DispatcherTimer whose Tick callback holds a strong reference to the DispatcherTimer itself.
This causes a reference cycle, inadvertently leaking timer instances.
## PR Checklist
* [x] Closes#7710
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
I've initially wanted to remove the `ThrottledFunc<>` optimization, but it turns out that this causes a 3% slowdown. That's definitely not a lot, but enough that we can just keep the optimization for the time being.
I've moved the implementation from the .cpp file into the header regardless since the two implementations are extremely similar and it's easier that way to keep them in line.
## Validation Steps Performed
I've ensured that the scrollbar still updates its length when I add new lines to a newly created tab.
Does what it says on the can.
This is a follow up to #9472. Now that we have a control .lib, we can add tests for it.
Unfortunately, the `TermControl` itself is a horrible mess. So this new unittest lib is empty for now. I'm working on actual tests as a part of #6842, but this PR is here to keep the diffs smaller.
Also, apparently `server.vcxproj` had the wrong GUID in it.
* [x] I work here
* [x] Adds tests
## Summary of the Pull Request
This PR adds support for renaming windows.
It does so through two new actions:
* `renameWindow` takes a `name` parameter, and attempts to set the window's name
to the provided name. This is useful if you always want to hit <kbd>F3</kbd>
and rename a window to "foo" (READ: probably not that useful)
* `openWindowRenamer` is more interesting: it opens a `TeachingTip` with a
`TextBox`. When the user hits Ok, it'll request a rename for the provided
value. This lets the user pick a new name for the window at runtime.
In both cases, if there's already a window with that name, then the monarch will
reject the rename, and pop a `Toast` in the window informing the user that the
rename failed. Nifty!
## References
* Builds on the toasts from #9523
* #5000 - process model megathread
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50771747
* [x] I work here
* [x] Tests addded (and pass with the help of #9660)
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I'm sending this PR while finishing up the tests. I figured I'll have time to sneak them in before I get the necessary reviews.
> PAIN: We can't immediately focus the textbox in the TeachingTip. It's
> not technically focusable until it is opened. However, it doesn't
> provide an even tto tell us when it is opened. That's tracked in
> microsoft/microsoft-ui-xaml#1607. So for now, the user _needs_ to
> click on the text box manually.
> We're also not using a ContentDialog for this, because in Xaml
> Islands a text box in a ContentDialog won't recieve _any_ keypresses.
> Fun!
## Validation Steps Performed
I've been playing with
```json
{ "keys": "f1", "command": "identifyWindow" },
{ "keys": "f2", "command": "identifyWindows" },
{ "keys": "f3", "command": "openWindowRenamer" },
{ "keys": "f4", "command": { "action": "renameWindow", "name": "foo" } },
{ "keys": "f5", "command": { "action": "renameWindow", "name": "bar" } },
```
and they seem to work as expected
This commit introduces support for inverting all types of cursor.
To invert the display without re-rendering any text, we draw the cursor
into a command list and then compose the command list with the existing
renderer using the MASK_INVERT composition flag.
This wouldn't normally work with our renderer because there is no
_background_ color to invert in some cases (such as when acrylic is in
use.)
To work around that, we're taking advantage of @zadjii-msft's two-pass
cursor renderer.
To properly invert the cursor over a transparent background:
(Examples are given below for two cursor types, but this applies to all
of them.)
First, we'll draw a "backplate" in the user's requested background color
(with the alpha channel set to 0xFF). (`firstPass` == true)
EMPTY BOX FILLED BOX
===== =====
= = =====
= = =====
= = =====
===== =====
Second, the glyph is drawn (outside of the cursor renderer).
EMPTY BOX FILLED BOX
==A== ==A==
=A A= =A=A=
AAAAA AAAAA
A A A===A
A===A A===A
Last, we'll draw the cursor again in all white and use that as the
*mask* for inverting the already-drawn pixels. (`firstPass` == false) (#
= mask, a = inverted A)
EMPTY BOX FILLED BOX
##a## ##a##
#A A# #a#a#
aAAAa aaaaa
a a a###a
a###a a###a
Related to #9610
## Validation Steps Performed
Manual visual validation in all configurations.
**Summary of the Pull Request**
This PR adds an X Macro for defining our ShortcutActions. This means that you can add the action in one place, and have the macro synthesize all sorts of boilerplate for you!
From the `AllShortcutActions.h` file:
> For a clearer explanation of how this file should be used, see:
> https://en.wikipedia.org/wiki/X_Macro
>
> Include this file to be able to quickly define some code in the exact same
> way for _every single shortcut action_. To use:
>
> 1. Include this file
> 2. Define the ON_ALL_ACTIONS macro with what you want each action to show up
> as. Ex:
>
> #define ON_ALL_ACTIONS(action) void action##Handler();
>
> 3. Then, use the ALL_SHORTCUT_ACTIONS macro to get the ON_ALL_ACTIONS marcro
> repeated once for every ShortcutAction
>
> This is used in KeyMapping.idl, ShortcutAction.*, TerminalPage.*, etc. to
> reduce the number of places where we must copy-paste boiler-plate code for
> each action. This is _NOT_ something that should be used when any individual
> case should be customized.
**PR Checklist**
* [x] Scratches an itch
* [x] I work here
* [x] Tests passed
* [n/a] Requires documentation to be updated
**Detailed Description of the Pull Request / Additional comments**
Originally I had this blocked as a follow up to #9662. However, I've grown tired after a month of merging main into this branch, and I'm just shipping it separately. It will inevitably conflict with anyone who has actions in flight currently.
**Validation Steps Performed**
The code still builds exactly as before!
Broadly, the tests were broken by #7489 because there were no `_startupActions`. They relied on the removed codepath that assumed `wt.exe` always set actions, or `AppCommandlineArgs::ValidateStartupCommands` created one by default.
* [x] fixes#9659
* [x] I work here
* [x] the tests pass again
This pull request introduces Microsoft.Terminal.Core.Color as an
alternative to both Windows.UI.Color and uint32_t/COLORREF in the
TerminalCore, ...Control, ...SettingsModel and ...SettingsEditor layers.
M.T.C.Color is trivially convertible to/from til::color and therefore
to/from COLORREF, W.U.Color, and any other color representation we might
need².
I've replaced almost every use of W.U.Color and uint32_t-as-color in the
above layers, with minor exception¹.
The need for this work is twofold.
First: We cannot bear a dependency from TerminalCore (which should,
on paper, be Windows 7 compatible) on Windows.UI or any other WinRT
namespace.
This work removes one big dependency on Windows.UI, but it does not go
all the way.
Second: TerminalCore chose to communicate mostly in packed uint32s
(COLORREF), which was inherently lossy and dangerous.
¹ The UI layers (TerminalControl, TerminalApp) still use
Windows.UI.Color as they are intimately connected to the UWP XAML UI.
² In the future, we might even be able to *use* the alpha channel...
## PR Checklist
* [x] I ran into the need for this when I introduced cursor inversion
* [X] Fixes a longstanding itch
## Validation Steps Performed
Built and ran all tests for the impacted layers, even the local ones!
## Summary of the Pull Request
This is a follow up to #9300. Now that we have names on our windows, it would be nice to see who is named what. So this adds two actions:
* `identifyWindow`: This action will pop up a little toast (#8592) displaying the name and ID of the window, and is bound by default.
* `identifyWindows`: This action will request that ALL windows pop up that toast. This is meant to feel like the "Identify" button on the Windows display settings. However, sometimes, it's wonky.
That's being tracked upstream on https://github.com/microsoft/microsoft-ui-xaml/issues/4382
Because it's so wonky, we won't bind that by default. Maybe if we get that fixed, then we'll change the default binding from `identifyWindow` to `identifyWindows`
## References
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-51431492
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
You may note that there are some macros to make interacting with lots and lots of actions easier. There's a lot of boilerplate whenever you need to make a new action, so I thought: "Can we make that easier?"
Turns out you can make it a _LOT_ easier, but that work is still behind another PR after this one. Get excited
## Summary of the Pull Request
Currently, both when the tab is already closed, and when there is a
request to close a tab (might be rejected), we go through the same flow
in TerminalPage.
This might leave the system in inconsistent state, as the side-effects
of closing will persist even if the closing was aborted.
This PR separates between the two flows, by introducing a CloseRequested
event to the TabBase.
This event is used to inform the upper tier (the terminal page) about
the request and to trigger the same logic that happens when the tab is
closed directly from the terminal page (e.g., by clicking close on the
tab view).
The Closed event will be used only to handle the actual closing of the
tab. It will ensure that the tab gets removed from the terminal page if
required.
As a result, it a read-only pane will be closed non-interactively (aka
connection exits), the tab closed flow will be invoked, and no user
prompt will be shown.
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9572
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
Removes base layer (aka profiles.defaults) from the Settings UI. `SettingContainer` was also updated to not present a revert arrow when overriding a base layer value.
The new experience is now as follows:
- The revert arrow will only appear if you are overriding a value from a fragment extension.
- Users are still able to fully interact with `profiles.defaults` in their settings.json. Doing so still propagates those changes to their profiles as normal. In this case, the Settings UI presents the base layer value as the one that you selected.
#6800 - Settings UI Epic
Closes#9539
Change TAEF nuget package to use new Microsoft.Taef name; Update to 10.58 release build version.
## PR Checklist
* [x] Closes email from Phil letting us know TAEF has a new release build and a rename.
* [x] Closes annoying duplicate TAEF import warning in `Parser.UnitTests.vcxproj`
* [x] I work here.
* [ ] Need to see the tests run off CI to confirm this is fine for those environments and Helix
## Validation Steps Performed
* [x] Build/run tests locally
* [ ] Build/run unit and feature tests in CI
* [ ] Build/run Helix-lab tests in CI
This adds [`XamlStyler.Console`] to our solution, and calls it when we
format the code, to also format
our .xaml files.
* `XamlStyler.Console` is a dotnet tool so it needs to be restored with
`dotnet tool restore`
* I've added a set of rules to approximately follow [@cmaneu's XAML guidelines].
Those guidelines also recommend things based on the code-behind, which
this tool can't figure out, but also _don't matter that much_.
* There's an extra step to strip BOMs from the output, since Xaml Styler
adds a BOM by default. Some had them before and others didn't. BOMs
have been nothing but trouble though.
[`XamlStyler.Console`]: https://github.com/Xavalon/XamlStyler
[@cmaneu's XAML guidelines]: https://github.com/cmaneu/xaml-coding-guidelines
By default from ARM64 architecture projects, `WIN32` is not defined. It
is supposed to be for this proxy stub to work. So I've set it with the
preprocessor for this project.
## PR Checklist
* [x] Closes release build failure after #7489
* [x] I work here.
* [x] Built on my machine.
## Detailed Description of the Pull Request / Additional comments
`WIN32` appears to convey two meanings depending on who you are:
- To most of Windows, `WIN32` appears to mean the Win32 API surface and
sometimes the major OS version that goes with it. (Specifically in
contrast to 16-bit Windows.)
- To others, `WIN32` appears to mean a 32-bit processor or a synonym of
`x86`.
This is generally not a problem for a few reasons:
- VS defines `WIN32` in the default targets/props only for the `x86`
processor type. **BUT**
- Windows defines `WIN32` if it's not already defined in both
`minwinbase.h` and `ole2.h` which generally speaking manage to get
compiled into practically everything especially since `minwinbase.h`
tends to sneak itself in somehow through `windows.h` and that's
**THE** include to use the Windows API surface.
- Windows also defines `WIN32` for itself unconditionally and relatively
globally when building itself.
However, it's a problem here because:
- `rpcproxy.h` is the only header included in `dlldata.c`, a file
generated automatically by `midl.exe` in the SDK when making a proxy
stub.
- `rpcproxy.h` only defines its contents for a proxy when `WIN32` or
`_M_AMD64` are found.
- Therefore, it's defined pretty naturally for x86 and AMD64 targets
from VS, but not for ARM64.
- ARM64 support is pretty new and those who are attempting to build for
ARM64 and against the public SDK with Visual Studio for a classic COM
proxy... seems like a relatively unlikely combination.
I will follow up with the Visual Studio, Windows SDK, and MIDL/COM teams
to try to remove this pitfall from the public tooling. But for now, this
is the fix.
This is entirely self-serving. In my go-to config, I like having some of
the panes for a given profile in a different color scheme. This will let
a user pass `--colorScheme <scheme name>` to manually override the
scheme for that profile. Neat!
I think we can all agree that `TerminalPage.cpp` is an unruly beast of a
file. It's got everything. It does everything. It can sometimes be a bit
hard to work with, because of simply how big it is. This PR tries to
alleviate this by making `TerminalPage.cpp` just a little smaller. It
does so by moving pretty much everything related to tab management into
its own file, `TabManagement.cpp`. These methods that have moved are all
the same as they were before, and they're still members of
`TerminalPage`. But now they're all in one place.
I tried to move all the references to `_tabs` in `TerminalPage.cpp`, but
there's still a few that I left behind. Mostly because I felt that
moving those would be too gnarly a code change for an otherwise simple
cut&paste PR.
There are a few new methods I introduced:
* `_TabDragStarted` and `_TabDragCompleted`: These were lambdas before,
promoted to full methods.
* `_DismissTabContextMenus`: Remove all the right-click context menus
from the tabs
* `_FocusCurrentTab`: This one's a bit trickier, we were actually doing
this in a few different places, so I tried consolidating.
* `_HasMultipleTabs`: This doesn't need explaining.
* `_RemoveAllTabs`: Really, just encapsulation for the sake of removing
a `_tabs` from `TerminalPage.cpp`
* `_ResizeTabContent`: Really, just encapsulation for the sake of
removing a `_tabs` from `TerminalPage.cpp`
In the future, some enterprising young soul could try promoting that
file to its own class, and hiding `_tabs` (and `_mruTabs`) inside it.
Probably would need to take a reference to TerminalPage's `_tabView` and
`_newTabButton`. I'm not doing that right now, because I already hate
the idea of the ...
> 920 additions and 847 deletions.
... I'm making you look at already.
## Other thoughts
Some of the calls might be a little arbitrary - `_OpenNewTab` and
`_CreateNewTabFromSettings` probably should stay in `TerminalPage`? Or
at least elements of those might need to get split up better. Similarly
`TerminalPage::_OpenSettingsUI` stayed in `TerminalPage.cpp`, but it
does a lot of the same work as `_CreateNewTabFromSettings`. I'm not
saying this is the definitive places for these methods - it's code we're
working with, not stone ☺️
Building code merged with `main` this morning, and I hit a error where
the `TerminalConnection` project needed `ITerminalHandoff` something or
other, but that hadn't been built yet. I suspect that's because the
`OpenConsoleProxy` project needs to be built first, but it isn't set as
a dependency.
I suspect once that project is built once, this isn't ever an issue, but
I hadn't done that yet.
This fixed the build for me locally.
* [x] fixes local dev builds
* [x] also updates the name of the TerminalControl project in the .sln,
because apparently VS didn't like that.
This commit introduces a new build configuration, "Fuzzing", which
enables the new address sanitizer (shipped in VS 16.9) and code
coverage over the entire solution. Only a small subset of projects
(those comprising original conhost, right now) are selected to build in
this configuration, and even then only in Fuzzing|x64.
It also adds a fuzzing-adapted build of conhost, which makes no server
connections and handles no client applications. To do this, I've
replicated a bit of the console startup routine into fuzzmain.cpp and
made up some fake data. This is the bare minimum required to boot up
Win32 interactivity (or VT interactivity!) and pretend that a process
has connected.
If we don't pretend that a process has connected, "conhost" will exit
immediately. If we don't forge the process list, conhost will exit. If
we can't provide a server handle, we can't provide a "device comm".
Minor changes were necessary to server/host such that they would accept
a preexisting "device comm". We use this new behavior to provide a
"null" one that only hangs up threads and otherwise responds to requests
successfully.
This fuzzing-adapted build links LLVM's libFuzzer, which is an excellent
coverage-based fuzzer that will produce a corpus of inputs that exercise
unique codepaths. Eventually, we can use this to generate known-"good"
inputs for anything.
I've gone ahead and added a fuzz function that yeets bytes directly into
WriteCharsLegacy, which was the original reason I went down this path.
The implementation of LLVMFuzzerTestOneInput should be replaced with
whatever you want to fuzz.
We have been seeing some crashes (#9410) originating from a
use-after-free or a double-free in the renderer. The renderer is
iterating over the dirty rects from the render engine¹ and the rect list
is being freed out from under it.
Things like this are usually the result of somebody manipulating the
renderer's state outside of lock.
Therefore, this pull request introduces some targeted locking fixes
around manipulation of the pattern buffer (which, in turn, changes the
renderer state.)
¹ This was not a problem until #8621, which made the renderer return a
span instead of a copy for the list of dirty rects.
## Validation
I ran Terminal under App Verifier, and introduced a manul delay (under
lock) in the renderer such that the invalid map would definitely have
been invalidated between the renderer taking the lock and the renderer
handling the frame. AppVerif failed us without these locking changes,
and did not do so once they were introduced.
Closes#9410.
- Implements the default application behavior and handoff mechanisms
between console and terminal. The inbox portion is done already. This
adds the ability for our OpenConsole.exe to accept the incoming server
connection from the Windows OS, stand up a PTY session, start the
Windows Terminal as a listener for an incoming connection, and then
send it the incoming PTY connection for it to launch a tab.
- The tab is launched with default settings at the moment.
- You must configure the default application using the `conhost.exe`
propsheet or with the registry keys. Finishing the setting inside
Windows Terminal will be a todo after this is complete. The OS
Settings panel work to surface this setting is a dependency delivered
by another team and you will not see it here.
## Validation Steps Performed
- [x] Manual adjust of registry keys to the delegation conhost/terminal
behavior
- [x] Adjustment of the delegation options with the propsheet
- [x] Launching things from the run box manually and watching them show
in Terminal
- [x] Launching things from shortcuts and watching them show in the
Terminal
Documentation on how it works will be a TODO post completion in #9462
References #7414 - Default Terminal spec
Closes#492
The PlaySound functions were removed from OneCoreUAP_apiset.Lib in Windows 10 SDK 19041 because they did not actually belong there. Link to WinMM.Lib for PlaySoundW.
### Validation Steps Performed
* Built for x64 from repository root with: `MSBuild.exe -property:TargetPlatformVersion=10.0.19041.0`
* Installed CascadiaPackage_0.0.1.0_x64_Debug.msix and launched on 19042.867
There seems to be a bug in WinUI (see microsoft/microsoft-ui-xaml#2121)
that results in heterogeneous `ModernCollectionBasePanel` configured
with `DataTemplateSelector` and virtualization enabled to recycle a
container even if its `ContentTemplate` is wrong.
I considered few options of handling this:
* Disabling virtualization (by replacing item container template with
some non-virtualizing panel (e.g., `StackPanel`,
`VirtualizingStackPanel` with `VirtualizationMode`=`Standard`)
* Replacing `DataTemplateSelector` approach with `ChoosingItemContainer`
event handling approach, which allows you to manage the item container
(`ListViewItem`) allocation process.
I have chosen the last one, as it should limit the amount of
allocations, and might allow optimizations in the future.
The solution introduces:
* A container for `ListViewItem`s in the form of a map of sets:
* The key of this map is a data template (e.g., `TabItemDataTemplate`)
* The value in the set is the container
* `ChoosingItemContainer` event handler that looks for available item in
the container or creates a new one
* `ContainerContentChanging` event handler that returns the recycled
item to the container
Closes#9288
This commit clarifies some things inside WriteCharsLegacy by adding
comments and renaming parameter and enum names. It does not change any
logic.
`WC_ECHO` was used extensively to mean only one thing: whether to print
a control character like `\x18` (Ctrl+X>) as `^X`. It's been renamed
to make that abundantly clear.
## Summary of the Pull Request
Currently, when the MRU is enabled we lose the keybinding allowing us to
go forward/backward (aka right/left in LTR) in the tab view.
To fix that, this PR introduces "tabSwitcherMode" optional parameter to
the prevTab / nextTab commands.
If it is not provided the global setting will be used.
So if you want to go to adjacent tabs, even if MRU is enabled on the
system level you can use:
```
{ "command": { "action": "prevTab", "tabSwitcherMode": "inOrder" }, "keys": "ctrl+f1"}
{ "command": { "action": "nextTab", "tabSwitcherMode": "inOrder" }, "keys": "ctrl+f2"}
```
or even
```
{"command": { "action": "prevTab", "tabSwitcherMode": "disabled" }, "keys": "ctrl+f1"}
{ "command": { "action": "nextTab", "tabSwitcherMode": "disabled" }, "keys": "ctrl+f2"}
```
if you don't want tab switcher to show up
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9330
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated - not yet. Waiting for approval.
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
This commit introduces a few different announcements to the command
palette.
When you delete the `>`, it will announce that you have entered
"command-line mode". When you reintroduce the `>`, it will announce that
you are in "action search mode."
When you enter a nested command, it will announce that you are looking
at "more options for new tab..." or "more options for select color
scheme...".
When you search and find nothing, it will announce that there were no
matching commands (or tabs!)
Related to #7907.
This reduces by 10% the binary size of OpenConsole x64 Release.
Note | OpenConsole.exe
------ | ---------------------------
Before | 1156096
After | 1037312
Delta | -118784
%Delta | -10.27%
## Summary of the Pull Request
Currently a repeated attempt to close a read-only tab from context menu,
will bring the terminal into invalid state if user dismisses close action.
There are two root causes for this:
1. The tab close menu triggers the closing of the root pane
(rather than invoking close tab flow in the Terminal Page).
2. Currently panes are not aware that the closing was canceled,
and thus they trigger the Closed event, putting the system in a weird state,
where the Closed handlers were invoked, but the Pane remains.
This PR mitigates #9502, by addressing the first root cause
(the fix is trivial and hopefully can be serviced).
Moreover, it addresses the only existing UI flow that can trigger the issue.
The remaining problematic flow will occur when the connection is closed.
I have created a separate Issue to track it:
https://github.com/microsoft/terminal/issues/9572
as I guess the PR for it might be more complex.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9502
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
{fmt} 7.1.3 includes a number of changes, which I will summarize here:
* Switched to Dragonbox for float formatting (quoted, "20-30x faster"
than ostringstream)
* Significantly improves `FMT_COMPILE` (compile-time format string)
Currently dismissing "are you sure you wish to close read-only tab or pane"
dialog by pressing `ESC` will not abort tab closing
(aka the tab will be closed!)
The reason for this, is that we cancel, only if the "Cancel" is pressed
(aka result=PrimaryButton, while ESC returns result=None).
This PR fixes this, by doing what we usually do:
* Putting Cancel in the CloseButton (which is also triggered by ESC)
* Aborting the action if the result is not a Primary Button
However, since we want Cancel to be a default action,
we set CloseButton to be the DefaultButton in XAML
This is a small refactor on my way to much bigger, more painful refactors. This PR does five things:
* `TermControl.*` has historically had all the control-relevant EventArgs defined in the same file as TermControl. That's just added clutter to the files, clutter that could have been in it's own place. We'll move all those event arg to their own files.
* We'll also move `IDirectKeyListener` to its own file while we're at it.
* We'll update some of `TermControl`'s old `DEFINE`/`DECLARE_TYPED_EVENT` macros to the newer `TYPED_EVENT` macro, which is a bit nicer.
* We'll change `TermControl.TitleChanged` to a typed event. I needed that for a future PR, so let's just do it here
* While we're updating `TYPED_EVENT` macros, let's do `TerminalPage` too.
### checklist
* [x] I work here
* [x] This is work for #1256, but we've got a long way to go before that works.
TIL that the `<None Include="Foo.def" />` line in our projects is
actually totally meaningless. The important line is the one that's in
`cppwinrt.build.pre.props`, where we declare
```xml
<ModuleDefinitionFile Condition="Exists('$(ProjectName).def')">$(ProjectName).def</ModuleDefinitionFile>
```
So if you change a project's name, and not the `.def` file, then the
linker will just _not use the `.def` file at all_.
More importantly, this seemingly doesn't matter in debug builds. In a
Debug build, the linker will happily still include `WINRT_CanUnloadNow`
and `WINRT_GetActivationFactory` in the exports from the dll, even
without the `.def`. But in a Release build, the linker is much more
agressive about pruning symbols that aren't referenced, and without
those two, NONE of the symbols are eventually referenced.
This PR fixes `Microsoft.Terminal.Control` by renaming the `.def`, and
makes it marginally harder for someone to make the same mistake in the
future.
## References
* Regressed in #9472
## PR Checklist
* [x] Closes#9529
* [x] I work here
We don't need to use C++/WinRT's component authoring capabilities to be
a COM component. It's easier for us if we're not (and it makes the build
slightly faster!)
Binary size savings (x64 Release):
Note | WindowsTerminalShellExt.dll
------ | ---------------------------
Before | 136192
After | 130048
Delta | 6144
%Delta | 4.5%
**BE NOT AFRAID**. I know that there's 107 files in this PR, but almost
all of it is just find/replacing `TerminalControl` with `Control`.
This is the start of the work to move TermControl into multiple pieces,
for #5000. The PR starts this work by:
* Splits `TerminalControl` into separate lib and dll projects. We'll
want control tests in the future, and for that, we'll need a lib.
* Moves `ICoreSettings` back into the `Microsoft.Terminal.Core`
namespace. We'll have other types in there soon too.
* I could not tell you why this works suddenly. New VS versions? New
cppwinrt version? Maybe we're just better at dealing with mdmerge
bugs these days.
* RENAMES `Microsoft.Terminal.TerminalControl` to
`Microsoft.Terminal.Control`. This touches pretty much every file in
the sln. Sorry about that (not sorry).
An upcoming PR will move much of the logic in TermControl into a new
`ControlCore` class that we'll add in `Microsoft.Terminal.Core`.
`ControlCore` will then be unittest-able in the
`UnitTests_TerminalCore`, which will help prevent regressions like #9455
## Detailed Description of the Pull Request / Additional comments
You're really gonna want to clean the sln first, then merge this into
your branch, then rebuild. It's very likely that old winmds will get
left behind. If you see something like
```
Error MDM2007 Cannot create type
Microsoft.Terminal.TerminalControl.KeyModifiers in read-only metadata
file Microsoft.Terminal.TerminalControl.
```
then that's what happened to you.
OpenConsole.psm1 cached its root directory on import, which made it very
difficult to move into another Terminal clone and _do things_ (like code
formatting).
By resolving the root directory again per-cmdlet, we gain the ability
to...
```powershell
cd terminal
import-module ./tools/openconsole.psm1
cd ../terminal-2
invoke-codeformat
```
... and have it format the correct directory (terminal-2) instead of the
incorrect one (terminal).
This does unfortunately break the openconsole cmdlets _inside dep/wil
and dep/gsl_ because they are separate git repositories. This is taken
as an acceptable cost.
This finishes the implementation of `--window` to also accept a string
as the "name" of the window. So you can say
```sh
wt -w foo new-tab
wt -w foo split-pane
```
and have both those commands execute in the same window, the one named
"foo". This is just slightly more ergonomic than manually using the IDs
of windows. In the future, I'll be working on renaming windows, and
displaying these names.
> #### `--window,-w <window-id>`
> Run these commands in the given Windows Terminal session. This enables opening
> new tabs, splits, etc. in already running Windows Terminal windows.
> * If `window-id` is `0`, run the given commands in _the current window_.
> * If `window-id` is a negative number, or the reserved name `new`, run the
> commands in a _new_ Terminal window.
> * If `window-id` is the ID or name of an existing window, then run the
> commandline in that window.
> * If `window-id` is _not_ the ID or name of an existing window, create a new
> window. That window will be assigned the ID or name provided in the
> commandline. The provided subcommands will be run in that new window.
> * If `window-id` is omitted, then obey the value of `windowingBehavior` when
> determining which window to run the command in.
Before this PR, I think we didn't actually properly support assigning
the id with `wt -w 12345`. If `12345` didn't exist, it would make a new
window, but just assign it the next id, not assign it 12345.
## References
* #4472, #8135
* https://github.com/microsoft/terminal/projects/5
## Validation Steps Performed
Ran tests
Messed with naming windows, working as expected.
Closes https://github.com/microsoft/terminal/projects/5#card-51431478
Saw this while snooping around, the gci command on PowerShell core seems
to store the full path in the variable as oppose to just the leaf.
The other modification is to use the PowerShell module that vs ships to
setup the environment.
This accomplishes the first step towards embedding a preview on the Profiles/ColorSchemes page, by moving the `TerminalSettings` object over to the Terminal Settings Model project. We'll leverage this in a later PR to construct an embedded terminal in the settings UI.
`TerminalSettings` had to see a few more functions exposed in the IDL
(including some inheritance stuff).
Refresh the JSON to make TerminalSettings do it's thing across all the
open terminals.
References #9122 - Terminal Preview
References #6800 - SUI Epic
Currently, when loading command with sub-commands that fail to parse,
we result with command that:
* Is not considered nested (has no sub-commands)
* Has no action of its own
The commit contains a few changes:
1. Protection in the dispatch that will prevent NPE
2. Change in the command parsing that will no load
a command if all its sub-commands failed to parse
3. We will add a warning in this case (the solution is somewhat
hacky, due to the hack that was there previously)
When such command is passed to a dispatch we crash with NPE.
Closes#9448
Since #8602 merged, we need to pass a child of the settings object to
the TermControl upon initializing it. Since this happens in a few places
in `TerminalPage`, its probably best to use a helper.
Closes#9292
When working on #9403 I completely forgot that
double-click and triple-click should work even without shift.
Fixed it by allowing multi-selection even if not shift is pressed.
Closes#9453
## Validation Steps Performed
* [x] single click = no selection
* [x] single click and drag = selection starting from first point
* [x] single click in unfocused pane and drag = focus pane, selection starting from first point
* [x] double-click = selects a whole word
* [x] triple-click = selects a whole line
* [x] double-click and drag = selects a whole word, drag selects whole words
* [x] triple-click and drag = selects a whole line, drag selects whole lines
* [x] Shift single-click = defines start point
* [x] second Shift single-click = defines end point
* [x] Shift double-click = selects entire word
* [x] Shift triple-click = selects entire line
* [x] Shift double-click and drag = selects entire word, drag selects whole words
* [x] Mouse mode: Shift single-click = defines start point
* [x] Mouse mode: second Shift single-click = defines end point
* [x] Mouse mode: Shift double-click = selects entire word
* [x] Mouse mode: Shift triple-click = selects entire line
* [x] Mouse mode: Shift double-click and drag = selects entire word, drag selects whole words
Parenthesis in incorrect spot for default app policy check.
Related work items: MSFT-32071839
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 537ab5dfd9cc6af60b570697e77bba4b45822e05
I've also taken the opportunity to kill the xxxFullPDB trick. The
intermediate PDB is allowed to remain "vc141.pdb" or whatever it wants
to be. PDBs are now simply named after their projects, as was always
tradition.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Shift+click on a profile to open a new wt window with that profile. Or, shift+click on the '+' button to open a new wt window with the default profile.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9395
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing
[Git2Git] Merged PR 5760120: Add propsheet chooser to Windows
Now the inbox console propsheet can choose which terminal is default
Related work items: MSFT-32007202 #492
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev d80f506858bd990c267de6cefae7ff55707b3a57
## Summary of the Pull Request
Instead of displaying "Maximize" in the tooltip for the maximize/restore button even when the window is maximized, it now displays "Restore Down".
## References
Fixes#5693
## PR Checklist
* [X] Closes#5693
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
## Validation Steps Performed
Tested manually.
Change the vintage cursor height number box to a slider.
## References
Related: #9370
## PR Checklist
* [x] Closes#9377
* [x] zadjii-msft edit: Now _this one_ closes#9175
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
* [ ]
## Detailed Description of the Pull Request / Additional comments
It seems like the cursor height couldn't be lower than 25 percent regardless of the given value, so I've changed the `MinCursorHeightPercent` in CustomTextRenderer header file.
## Validation Steps Performed
Manual validation
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9382
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
The selection with shift is quite broken in 1.6.
It started with #8611 that introduces cell selection on `shift+click`.
This change resulted in the following defect:
`shift+double-click`, `shift+triple-click` select only parts of the word.
The reason for this is that the first `shift+click` establishes the selection,
while the consequent clicks simply extend it to the relevant boundary
(aka word / line boundary)
However, the logic was broken even before #8611.
For instance, `shift+triple-click` had exactly the same handicap:
`shift+double-click` was establishing the selection and the
third click was simply extending it to the line boundary.
This PR addresses the both defects in the following manner:
upon multi-click that starts new selection we establish
a new selection on every consequent click using appropriate mode
(cell/word/line) rather than trying to extend one.
For this purpose we remember the position that started the selection.
## Summary of the Pull Request
This replaces the Profiles > Font Face text box with a combo box.
## References
#6800 - Settings UI Epic
## Detailed Description of the Pull Request / Additional comments
- Enumerating the fonts
- [This doc](https://docs.microsoft.com/en-us/windows/win32/directwrite/font-enumeration) was the main reference used to enumerate the fonts. It was mildly adapted to use WinRT instead of WRL.
- Updating the UI
- Similar to other combo box settings, `Profiles` keeps a reference to the current value. We use that as a way to update the settings model. If an invalid value is used, we fallback to `Cascadia Mono`.
- A checkbox was added to let the user select from all of the installed fonts, or just the monospace ones.
## Demo
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9345
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated - not yet, will be once conceptually approved
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Introduce optional `suppressApplicationTitle` in to `NewTerminalArgs`.
When set (either to true or false) overrides profile configuration.
Introduce `--suppressApplicationTitle` flag to command line arguments.
When provided for sub=command,
sets the value in the relevant `NewTerminalArgs` to `true`
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8969
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
We were using the wrong close icon for the settings tab. This is a side effect of `TerminalTab` overriding `TabBase`'s implementation.
#6800 - Settings UI Epic
Closes#9317
As mentioned in https://github.com/microsoft/terminal/issues/9354#issuecomment-790034728
`GETSET_SETTING` is too visually similar to `GETSET_PROPERTY`, but with a _VERY_ different meaning. I think that merely changing the name of the macro would make it harder for us to make this mistake again.
## Summary of the Pull Request
Add `Minimum` and `Maximum` for the cursor height numberbox in the SUI.
Add `Minimum` for the history size numberbox in the SUI.
## PR Checklist
* [x] Closes#9357, Closes#9175
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Manual validation
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fix for #9354
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9354
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
I wanted to start using VScode. It wasn't easy. I wrote some tasks that allow us to build the various flavors of OpenConsole and Windows Terminal from one of the tasks. I also wrote a task that allows registration of the loose Windows Terminal package and a shortcut one to launch it.
Also it was grinding away at its own Intellisense forever because it was indexing obj, bin, packages, etc. I excluded those.
Things should be easier now for folks in general. I expect we'll make more task types in the future.
This update fixes some issues in Cascadia Code's February update:
microsoft/cascadia-code#406 - updated anchor type to lock with the other equals-related ligatures
microsoft/cascadia-code#408 - corrected component used for glyph to align with Unicode
microsoft/cascadia-code#412 - updated locl features removing iacute_j ligature and Catalan substitution
microsoft/cascadia-code#414 - increased overlaps of middle glyph for arrow ligatures
microsoft/cascadia-code#415 - reduces width of macronbelow
microsoft/cascadia-code#416 - rolls back name ID 4 modification as JetBrains cannot process it correctly
microsoft/cascadia-code#428 - rolls back variation of the underline to prevent MVAR table generation
Full changelist:
* Repositioned tilde in related ligatures. Previously it was higher than the standard one.
* Added missing vietnamese anchors on acute and grave (futureproofing).
* Corrected / made consistent greater & less positioning in </> and <$> related ligatures.
* Otherwise reviewed hinting
Turns out we were adding the fragment source to profiles we update. This
PR fixes it so we keep the original source.
## Validation Steps Performed
Existing profile settings are maintained
Closes#9290
Fixes a bug introduced by #9224 where the wrong keyboard accelerator
would appear in the new tab dropdown. We were looking for the "settings
file" version of the action, as opposed to the "settings UI" version.
## References
#9224 - Settings UI as default
#6800 - Settings UI Epic
In #8602, we started passing a child of the `TerminalSettings` to the
control upon tab initialization, but forgot to do the same when new
controls get created on a pane split.
## Validation Steps Performed
Settings reload with multiple panes works
Closes#9280
Similar to #9262. This creates another data template specifically for
command palette items that open up more options. We leverage the
localization key from #9262 to apply help text to this template
automatically.
Using the data template approach, we now have no need for the
`HasNestedComandsVisibilityConverter`, so that set of files is now
deleted. The logic to detect nested commands was moved to the template
selector.
## Validation Steps Performed
Tested using NVDA.
Addresses #7908 better
This makes the settings UI the default settings experience.
As shown below, the following bindings are now default:
- <kbd>ctrl+,</kbd> --> settings ui
- <kbd>ctrl+shift+,</kbd> --> settings.json
- <kbd>ctrl+alt+,</kbd> --> defaults.json
The dropdown settings button aligns with this heuristic:
- click --> settings ui
- shift+click --> settings.json
- alt+click --> defaults.json
- if alt and shift both pressed, open settings.json
#6800 - Settings UI Epic
This sets the automation property (name) on the tab view item we expose in XAML.
## PR Checklist
* [x] Closes#9254
## Validation Steps Performed
Tested under NVDA and Accessibility Insights
This was the only thing blocking me from signing off on #9224 in 1.7.
! CHANGE WARNING !
If we bind to `T.S.M.Command`s in XAML, then the compiler gets _very
angry_ at us. It generates two different versions of
`GetReferenceTypeMember_Icon` in `XamlTypeInfo.g.cpp`. Presumably
because there's an Icon on a NavViewItem and an Icon on a Command. We
don't really know why. Fortunately, the fix is "rename Command::Icon" to
"Command::IconPath". It's dumb, but it works. Thanks for the help with
that one Carlos ☺️
Unblocks #9224
It appears as though the optimizer is generating a sequence of
instructions on x64 that results in a nonsense std::wstring_view being
passed to SetPixelShaderPath when it's converted from a winrt::hstring.
Initially, I suspected that the issue was in us caching `_settings`
before we broke off the coroutine to update settings on the UI thread. I
implemented a quick fix for this (applying values off the new settings
object while also storing it in the control instance), but it didn't
actually lead anywhere. I do think it's the right thing to do for code
health's sake. Pankaj already changed how this works in 1.7: we no
longer (ever) re-seat the `_settings` reference... we only ever change
its parentage. Whether this is right or wrong is not for this paragraph
to discuss.
Eventually, I started looking more closely at the time travel traces. It
seriously looks like the wstring_view is generated wrong to begin with.
The debugger points directly at `return { L"", 0 };` (which is correct),
but the values we get immediately on the other side of the call are
something like `{ 0x7FFFFFFF, 0 }` or `{ 0x0, 0x48454C4C }`.
I moved _just_ the call to SetPixelShaderPath into a separate function.
The bug miraculously disappeared when I marked it **noinline**. It
reappeared when the function was fully inlined.
To avoid any future issues, I moved the whole UI thread body of
UpdateSettings out into its own function, to be called only while on the
UI thread. This fixes the bug.
Closes#8723.
Closes#9064.
I found a repro (update the settings file every 0.5 seconds and resize
the terminal wildly while it's doing so) that would trigger the bug
within ~10 seconds. It stopped doing so.
(cherry picked from commit 91b867102c)
Add a setting to turn off the warning if 'Touch Keyboard and
Handwriting Panel Service' is disabled.
The service might not start in some case, and it doesn't affect the
input in some computer. This PR turn off the warning even if the
service is disabled. The setting name is "inputServiceWarning".
## Validation Steps Performed
I manually set the service to "Disabled", restarted the Terminal,
verified the warning up, then set "inputServiceWarning" to false and
restarted the Terminal, and the warning didn't appear.
References #8095
References https://github.com/microsoft/terminal/issues/7886#issuecomment-729350169
When the user executes `--help`, make sure we force the creation of a new window, so that the `MessageBox` will actually appear.
Add tests too.
* [x] I work here
* [x] Fixes#9230
* [x] Tests added
I'm gonna have to immediately rewrite those tests for https://github.com/microsoft/terminal/projects/5#card-51431478, but this issue is ship-blocking so I don't care
The command palette's list items explicitly specify the "AcceleratorKey"
property (for UIA) and set it to the key binding. Putting it in a label
inside the list item makes Narrator read it out twice ("New Tab ...
ctrl+shift+t ... ctrl+shift+t").
Addresses #7913 (to be closed when a11y re-evaluates)
A header line is missing from a few `.svg` files, denying their use (via
a security error) in WordPress (if svg support is enabled). The upload
is rejected even though the web browser could display the image if it
were dragged into its own tab.
The `.svg` images appear to have been edited at different times and with
different tools. Their contents are in a different style. Two of them
are beautiful and the rest do not follow suit and do not function the
same.
I don't know enough to make them all the same style, but changes can be
made to three of them to make them work the way I was expecting (see
below).
## Validation Steps Performed
- Perform the change with a text editor
- Open a new WordPress post page
- Drag-and-drop the changed file into that WordPress edit box
- (The WordPress media upload dialog appears and the file is uploaded)
- Confirmed that the file does not trigger a "security error" (as seen
at the top of the right-hand column)
- Confirmed that the image appears as a thumbnail preview
`Terminal_Pre_HC.svg` is not fixable in this way, and I don't understand
svg well enough to troubleshoot easily.
Finally implements the `newWindow` action. It does so by
`ShellExecute`ing `wt.exe` with commandline args corresponding to the
ones that would create the same `NewTerminalArgs`. This works with #8898
and #9118 to allow new windows (even with `windowingBehavior:
useExisting`)
This is taken from my auto-elevate branch, hence the references to
elevation
References #5000
References projects/5
References #8898
References #9118Closes#1051
This PR adds improved override message generation for inheritance in
SUI. The settings model now has an `OriginTag` to be able to denote
where a `Profile` came from. This tag is used in the `SettingContainer`
to generate a more specific override message.
## References
#6800 - SUI Epic
#8919 - SUI Inheritance PR
#8804 - SUI Inheritance (old issue)
## Detailed Description of the Pull Request / Additional comments
- **Terminal Settings Model**
- Introduced `PROJECTED_SETTING` as a macro to more easily declare the
functions for each setting
- Introduced `<setting>OverrideSource` which finds the `Profile` that
has \<setting\> defined
- Introduced `OriginTag Profile::Origin {Custom, InBox, Generated}` to
trace where a profile came from
- `DefaultProfileUtils` creates profiles for profile generators. So
that now sets the `Origin` tag to `Generated`
- `CascadiaSettings::LoadDefaults()` tags all profiles created as
`InBox`.
- The view model had to ingest the API change to be able to interact
with `<setting>OverrideSource`
- **Override Message Generation**
- The reset button now has a more specific tooltip
- The reset button now only appears if base layer is being overridden
- We use the settings model changes to determine the message to
display for the target
## Validation Steps Performed
Tested the following cases:
- overrides nothing (inherited setting)
- overrides value inherited from...
- base layer
- a profile generator
- in-box profile
- global settings should not have this feature
This PR is a resurrection of #8414. @Hegunumo has apparently deleted
their account, but the contribution was still valuable. I'm just here to
get it across the finish line.
This PR adds new global setting `centerOnLaunch`. When set to `true`,
the Terminal window will be centered on the display it opens on.
So the interactions are like:
* `initialPos: x,y`, `centered: true`, `launchMode: default`
center on the monitor that x,y is on
* `initialPos: x,y`, `centered: true`, `launchMode: maximized`
maximized on the monitor that x,y is on (centered adds nothing)
* `initialPos: <omitted>`, `centered: true`, `launchMode: default`
center on the default monitor
* `initialPos: <omitted>`, `centered: true`, `launchMode: focus`
center, focus mode on the default monitor
* `initialPos: <omitted>`, `centered: true`, `launchMode: maximized`
maximized on the default monitor (centered adds nothing)
## Validation Steps Performed
I've played with it on multiple different monitors, and it seems to work
on all of them.
Closes#8414 (original PR)
Closes#7722
Co-authored-by: Kiminori Kaburagi <yukawa_hidenori@icloud.com>
Updates the following text in the settings UI
- focus follow mouse mode is introduced to be more instructional
- focus follow mouse mode tooltip removed
- avoid double negative in "disable pane animation"
Closes#8900
Updates #6459 Settings UI text
Adds support for the `windowingBehavior` global setting. This setting
controls how mutiple instances of `wt` behave in the absence of the `-w`
parameter. This setting has three values:
* `"useNew"`: (default) Multiple `wt` invocations (without the `-w`
param) always create new windows.
* `"useAnyExisting"`: When starting a new `wt`, we'll instead default to
any existing windows. `wt -w -1` will still create new windows.
* `"useExisting"`: Similar to `useAnyExisting`, but limits to
windows on the current desktop.
The IVirtualDesktopManager interface is _very_ limited. Hence why we
have to track the HWNDs manually, and ask if they're on the current
desktop.
## Validation Steps Performed
I've been playing with it for a week now.
References #5000
References projects/5
References #8898
Spec'd in #8135Closes#2227
Closes https://github.com/microsoft/terminal/projects/5#card-51431448
Closes https://github.com/microsoft/terminal/projects/5#card-51431433
Fixes exception in FilteredCommandTests, caused due to
an attempt to instantiate PropertyChangedEventArgs on non-UI thread.
Though the diff might look scary it is just wrapping with `RunOnUIThread`
This PR performs a large overall polish of the color schemes page:
- Ensures keyboard navigation is holistically improved (i.e. fully
accessible, no lost focus, etc...)
- Adds tooltips and automation properties to all controls
- Redesigns the page according to @mdtauk's approved design
([link](https://github.com/microsoft/terminal/pull/8997#issuecomment-771623842)).
Note, there are some minor modifications to the design that were
approved by @cinnamon-msft.
- Automatically reflow's the color buttons when they do not fit in
horizontal mode
## Detailed Description of the Pull Request / Additional comments
- Redesign
- a data template was introduced to make color representation
consistent and straightforward
- `ContentControl` is used to hold a reference to the
`ColorTableEntry` and represent it properly using the aforementioned
data template.
- The design is mainly a StackPanel holding two grids: color table &
functional colors.
- The color table is populated via code. After much thought, this
seems to be the easiest way to correctly bind 16 controls that are
very similar.
- The functional colors are populated via XAML manually.
- We need a grid to separate the text and the buttons. This allows for
scenarios like "selection background is the longest string" to force
the buttons and text to be aligned.
- Reflow
- A `VisualStateManager` uses an `AdaptiveTrigger` to change the
orientation of the color tables' stack panel. The adaptive trigger
was carefully calculated to align with the navigation view's
breakpoint.
- Keyboard Navigation
- (a lesson from `SettingContainer`) `ContentControl` can be focused
as opposed to the content inside of it. We don't want that, so we
set `IsTabStop` to false on it. That basically fixes all of our
keyboard navigation issues in this new design.
- Automation Properties and ToolTips
- As in my previous PRs, I can't seem to figure out how to bind to a
control's automation property to its own tooltip. So I had to do
this in the code and add a few `x:Name` around.
## Validation Steps Performed
- Manually tested...
- tab navigation
- accessibility insights
- NVDA
- changing color schemes updates color table
- specific scenario:
- change a color table color and a functional color
- navigate to a different color scheme
- navigate back to the first color scheme
- if the colors persist, the changes were propagated to the settings model
References #8997 - Based on the work from @Chips1234
References #6800 - Settings UI Epic
Closes#8765 - Polish Color Schemes page
Closes#8899 - Automation Properties
Closes#8768 - Keyboard Navigation
`ComboBox` has a text search function that allows users to type letters, and the `ComboBoxItem` starting with those letters is shown. In order to enable this functionality, the underlying items must be `IStringable`. This exposes a `ToString()` function and fixes all of our issues.
This PR adds the `IStringable` interface to `ColorScheme`, `Profile`, and `EnumEntry`.
## References
#6800 - Settings UI Epic
#8768 - Keyboard Navigation
https://github.com/microsoft/microsoft-ui-xaml/issues/4182 - discussion with WinUI about how to overcome this issue
## Validation Steps Performed
Tested...
- Launch > Default Profile
- Color Schemes > Name
- Profile > Appearance > Color scheme
- Profile > Appearance > Font weight
Also tested radio buttons, but those still don't work, unfortunately. Looks like they don't have the same underlying mechanism.
Support for fragment extensions, according to the implementation
outlined in #7584 (which calls them proto extensions.)
See #7584 for more information.
## Validation Steps Performed
Self-testing by creating the folder
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments`
and adding a json file into it to modify and add profiles
Also self-tested with an app extension
Closes#1690
A bunch of our local tests regressed recently. I'm unsure as to when
this happened. Clearly, we all do a super good job of running these
tests 😄.
* I had to make sure the call to `AppLogic::CurrentAppSettings` was
try/caught, because that doesn't work in the tests
* I had to make the `Pointer*` events take a weak pointer to the
`TerminalPage` because for whatever reason, they'd be called at a
weird point in the test init, causing the tests to fail. It was weird.
Almost as if the TerminalPage had been released, but the test logs
showed it hadn't barely been set up yet? Whatever, this fixes it.
* The `VerifyCommandPaletteTabSwitcherOrder` test needed to take a time
out, for reasons that are not totally clear to me. That one was flakey
and I hate it.
### Checklist:
* [x] Doesn't close anything, this is just something I noticed.
* [x] Doesn't require docs to be updated, it's test fixes
* [x] Yea, I ran the tests
/cc @Don-Vito: The `FilteredCommandTests` all crashed immediately for
me. I'm not sure what's causing that - I _think_ everything we need for
those tests is set up right? The generated `AppxManifest.xml` had all
the right classes listed in it, I really can't be sure what was wrong
there. These tests aren't run in CI so it's not a super big deal, but I
thought I'd let you know.
(cherry picked from commit ccda434f69)
This PR is a resurrection of #8522. @Hegunumo has apparently deleted
their account, but the contribution was still valuable. I'm just here to
get it across the finish line.
This PR adds new action for navigating to the next & previous search
results. These actions are unbound by default. These actions can be used
from directly within the search dialog also, to immediately navigate the
results.
Furthermore, if you have a search started, and close the search box,
then press this keybinding, _it will still perform the search_. So you
can just hit <kbd>F3</kbd> repeatedly with the dialog closed to keep
searching new results. Neat!
If you dispatch the action on the key down, then dismiss a selection on
a key up, we'll end up immediately destroying the selection when you
release the bound key. That's annoying. It also bothers @carlos-zamora
in #3758. However, I _think_ we can just only dismiss the selection on a
key up. I _think_ that's fine. It _seems_ fine so far. We've got an
entire release cycle to futz with it.
## Validation Steps Performed
I've played with it all day and it seems _crisp_.
Closes#7695
Co-authored-by: Kiminori Kaburagi <yukawa_hidenori@icloud.com>
In the FFM mode, hovering on the pane might dismiss renamer.
To address this we want to make sure that FFM is applied
only if the Terminal Tab is focused.
This is my attempt to isolate all the dwrite font related thing by
introducing a new layer - `DxFontRenderData`. This will free
`DxRenderer` & `CustomTextLayout` from the burden of handling fonts &
box effects. The logic is more simplified & streamlined.
In short I just moved everything fonts-related into `DxFontRenderData`
and started from there. There's no modification to code logic. Just pure
structural stuff.
SGR support tracking issue: #6879
Initial Italic support PR: #8580
This PR adds support for the VT line rendition attributes, which allow
for double-width and double-height line renditions. These renditions are
enabled with the `DECDWL` (double-width line) and `DECDHL`
(double-height line) escape sequences. Both reset to the default
rendition with the `DECSWL` (single-width line) escape sequence. For now
this functionality is only supported by the GDI renderer in conhost.
There are a lot of changes, so this is just a general overview of the
main areas affected.
Previously it was safe to assume that the screen had a fixed width, at
least for a given point in time. But now we need to deal with the
possibility of different lines have different widths, so all the
functions that are constrained by the right border (text wrapping,
cursor movement operations, and sequences like `EL` and `ICH`) now need
to lookup the width of the active line in order to behave correctly.
Similarly it used to be safe to assume that buffer and screen
coordinates were the same thing, but that is no longer true. Lots of
places now need to translate back and forth between coordinate systems
dependent on the line rendition. This includes clipboard handling, the
conhost color selection and search, accessibility location tracking and
screen reading, IME editor positioning, "snapping" the viewport, and of
course all the rendering calculations.
For the rendering itself, I've had to introduce a new
`PrepareLineTransform` method that the render engines can use to setup
the necessary transform matrix for a given line rendition. This is also
now used to handle the horizontal viewport offset, since that could no
longer be achieved just by changing the target coordinates (on a double
width line, the viewport offset may be halfway through a character).
I've also had to change the renderer's existing `InvalidateCursor`
method to take a `SMALL_RECT` rather than a `COORD`, to allow for the
cursor being a variable width. Technically this was already a problem,
because the cursor could occupy two screen cells when over a
double-width character, but now it can be anything between one and four
screen cells (e.g. a double-width character on the double-width line).
In terms of architectural changes, there is now a new `lineRendition`
field in the `ROW` class that keeps track of the line rendition for each
row, and several new methods in the `ROW` and `TextBuffer` classes for
manipulating that state. This includes a few helper methods for handling
the various issues discussed above, e.g. position clamping and
translating between coordinate systems.
## Validation Steps Performed
I've manually confirmed all the double-width and double-height tests in
_Vttest_ are now working as expected, and the _VT100 Torture Test_ now
renders correctly (at least the line rendition aspects). I've also got
my own test scripts that check many of the line rendition boundary cases
and have confirmed that those are now passing.
I've manually tested as many areas of the conhost UI that I could think
of, that might be affected by line rendition, including things like
searching, selection, copying, and color highlighting. For
accessibility, I've confirmed that the _Magnifier_ and _Narrator_
correctly handle double-width lines. And I've also tested the Japanese
IME, which while not perfect, is at least useable.
Closes#7865
Implement the `XTPUSHSGR` and `XTPOPSGR` control sequences (see #1796).
This change adds a new pair of methods to `ITermDispatch`:
`PushGraphicsRendition` and `PopGraphicsRendition`, and then plumbs the
change through `AdaptDispatch`, `TerminalDispatch`, `ITerminalApi` and
`TerminalApi`.
The stack logic is encapsulated in the `SgrStack` class, to allow it to
be reused between the two APIs (`AdaptDispatch` and `TerminalDispatch`).
Like xterm, only ten levels of nesting are supported.
The stack is implemented as a "ring stack": if you push when the stack
is full, the bottom of the stack will be dropped to make room.
Partial pushes (see the description of `XTPUSHSGR` in Issue #1796) are
implemented per xterm spec.
## Validation Steps Performed
Tests added, plus manual verification of the feature.
Closes#1796
Dustin L. Howett (3)
* Fix the Host Proxy DLL reference in ServerLib (GH-9129)
* ci: fix spelling
* Format the incoming inbox code
Michael Niksa (1)
* Eliminate more transient allocations: Titles and invalid rectangles and bitmap runs and utf8 conversions (GH-8621)
Related work items: MSFT-31755835
This will make sure to summon the terminal window when running a
commandline in it.
* If the window is on another desktop, the OS will switch to the desktop
the window is on.
* If the window is minimized, it will restore it.
This is taken from my quake mode branch. It works aggressively. 848682a,
fee6473, 342d3f2, 5052d31 all had other attempts at doing this, but they
didn't work reliably. Part of the trick is that I don't _think_ Windows
wants one process to be able to move another process into the
foreground. In this case though, we _do_ want to move ourself into the
foreground, and this `AttachThreadInput` hack seems to be the only way
to do it reliably.
References #5000
Uses code authored for #653
Closes https://github.com/microsoft/terminal/projects/5#card-54636373
Fixes a regression of command palette accessibility. The regression was
introduced in #8377 by setting `IsTabStop` to false. Though the commands
would light up, the focus didn't technically get on the command, so the
screen reader would just read the text box.
## Validation Steps Performed
Opened the command palette while NVDA is active. It now reads the
commands as focus moves on them.
The terminal WPF container might have a (0,0) render size when VS
eagerly attempts to initialize the terminal tool window when it is
pinned during startup, but no actual UI is shown due to the VS welcome
dialog that shows up before VS can build the terminal tool window.
We've fixed this issue previously in other areas but only recently did
we get a complete enough dump to find the corner cases for this issue.
This should patch all the gaps that cause this bug.
## Validation Steps Performed
I've manually validated the scenarios shown in the user dumps.
## Summary of the Pull Request
After rename ends (either by enter or escape) the rename box
gets collapsed and the focus moves to the next tab stop
in the TabView (e.g., new tab button).
To overcome this:
* Added RenameEnded event to TabHeaderControl
* Forwarded it as RenamerDeactivated from TerminalTab
* Registered in the TerminalPage to focus the active control upon
RenamerDeactivated if focus didn't move to tab menu.
This means, no matter how you close the renamer,
the current terminal gains the focus.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9160
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
- 0b0dbdf Makes the browse buttons center vertically aligned
- This is now made possible by #8919. The "center" used to include the height of the header. Now that it's separated, the center is solely calculated to be the text box.
- Closes#8764
- 0288f06 Fix keyboard navigation focus for color schemes rename button
- Enter/Esc when in the scheme renamer now focuses the combo box
- Keyboard-invoking accept/cancel button focuses the rename button
- References #8765 and #8768
- d5ef552 Cyclical tab navigation
- now, if you try to tab past the save button, you cycle back to the beginning of the navigation view
- this is consistent with the xaml controls gallery
- References #8768
- a613b08 AutomationProperties for Save, Reset, and open json buttons
- References #8899
Aims to fix#8791.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Prior to this PR, if the Windows key was pressed as a part of a key combination, then selection was being dismissed. For example, when a user pressed `Windows` + `Shift` + `S` keys to invoke the _Capture & Annotate_ tool.
This PR adds an exception for not clearing selection when either of the two Windows keys are pressed as part of a key combination.
It was tested manually by trying to reproduce the issue.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#8791
* [x ] CLA signed.
* [x ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8791
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
1. Build Terminal.
2. Write anything & make a selection.
3. Press `Windows`+ `Shift` + `S` keys.
4. The _Capture & Annotate_ tool appears but the selection made in step 2 isn't dismissed (doesn't disappear).
## References
* See also #8617
## PR Checklist
* [x] Supports #3075
* [x] I work here.
* [x] Manual test.
## Detailed Description of the Pull Request / Additional comments
### Window Title Generation
Every time the renderer checks the title, it's doing two bad things that
I've fixed:
1. It's assembling the prefix to the full title doing a concatenation.
No one ever gets just the prefix ever after it is set besides the
concat. So instead of storing prefix and the title, I store the
assembled prefix + title and the bare title.
2. A copy must be made because it was returning `std::wstring` instead
of `std::wstring&`. Now it returns the ref.
### Dirty Area Return
Every time the renderer checks the dirty area, which is sometimes
multiple times per pass (regular text printing, again for selection,
etc.), a vector is created off the heap to return the rectangles. The
consumers only ever iterate this data. Now we return a span over a
rectangle or rectangles that the engine must store itself.
1. For some renderers, it's always a constant 1 element. They update
that 1 element when dirty is queried and return it in the span with a
span size of 1.
2. For other renderers with more complex behavior, they're already
holding a cached vector of rectangles. Now it's effectively giving
out the ref to those in the span for iteration.
### Bitmap Runs
The `til::bitmap` used a `std::optional<std::vector<til::rectangle>>`
inside itself to cache its runs and would clear the optional when the
runs became invalidated. Unfortunately doing `.reset()` to clear the
optional will destroy the underlying vector and have it release its
memory. We know it's about to get reallocated again, so we're just going
to make it a `std::pmr::vector` and give it a memory pool.
The alternative solution here was to use a `bool` and
`std::vector<til::rectangle>` and just flag when the vector was invalid,
but that was honestly more code changes and I love excuses to try out
PMR now.
Also, instead of returning the ref to the vector... I'm just returning a
span now. Everyone just iterates it anyway, may as well not share the
implementation detail.
### UTF-8 conversions
When testing with Terminal and looking at the `conhost.exe`'s PTY
renderer, it spends a TON of allocation time on converting all the
UTF-16 stuff inside to UTF-8 before it sends it out the PTY. This was
because `ConvertToA` was allocating a string inside itself and returning
it just to have it freed after printing and looping back around again...
as a PTY does.
The change here is to use `til::u16u8` that accepts a buffer out
parameter so the caller can just hold onto it.
## Validation Steps Performed
- [x] `big.txt` in conhost.exe (GDI renderer)
- [x] `big.txt` in Terminal (DX, PTY renderer)
- [x] Ensure WDDM and BGFX build under Razzle with this change.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add the keyboard navigation to the color picker.
Test manually.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6675
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tested manually
A bug in VS 16.8 makes the WAP packaging project copy System.Core.dll
from the CLR into all WAP packages. We don't need it, and it adds 300kb
to our package (670kb uncompressed).
VS 16.9 sets the AddAdditionalExplicitAssemblyReferences to suppress
this assembly. If we do the same, we can avoid the reference *and* be
eady for VS 16.9.
Contains:
- Delegation Configurator that can lookup/edit/save configuration information to registry
- Conhost can lookup the CLSID of a registered default
- Conhost has the ability to handoff a starting visible-window interactive session to the registered default
- Velocity key since this is a big deal and we want to be careful
- IDL for the interface
Related work items: MSFT-16458099
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 0ca55027d8180fbbaa145f2fe7a15005856c0f7c
Dustin L. Howett (3)
* Move CharToKeyEvents (and friends) into InteractivityBase (GH-9106)
* Update Cascadia Code to 2102.03 (GH-9088)
* verison: bump to 1.7 on main
Josh Soref (1)
* ci: update to Spell check to 0.0.17a (CC-9014)
Leonard Hecker (3)
* Fixed GH-5205: Ctrl+Alt+2 doesn't send ^[^@ (CC-5272)
* Fix issues in tests.xml and OpenConsole.psm1 (CC-9011)
* Fix GH-8458: Handle all Ctrl-key combinations (CC-8870)
Mike Griese (1)
* Add support for running a commandline in another WT window (GH-8898)
Michael Niksa (1)
* Teach the renderer to keep thread alive if engine requests it (GH-9091)
Lachlan Picking (1)
* Fix shader time input (CC-8994)
PankajBhojwani (1)
* Separate runtime TerminalSettings from profile-TerminalSettings (CC-8602)
Chester Liu (2)
* Add support for paste filtering and bracketed paste mode (CC-9034)
* Add support for chaining OSC 10-12 (CC-8999)
Related work items: MSFT-31692939
Due to a minor OS issue, we needed to shim PMR _even more_.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a83daa5e2af50121d79be082d005ff2e969ad18e
Related work items: MSFT-31478342
Avoid sending mouse move / wheel / release to Terminal in the first place.
This kind of short-circuiting will prevent us reaching the
attempt to send input to connection
(that could result in the warning dialog in the read-only mode)
Closes#9074
These functions have a dependency on the "VT Redirected" versions of
VkKeyScanW, MapVirtualKeyW and GetKeyState. Those implementations depend
on the service locator and therefore the entire interactivity stack.
This meant that anybody depending on just Types had to pull in **the
entire host** worth of dependencies (!).
Since these functions are only used in places where we have or are
testing interactivity, it makes sense to consolidate them here.
(cherry picked from commit 8f73145d9d)
These functions have a dependency on the "VT Redirected" versions of
VkKeyScanW, MapVirtualKeyW and GetKeyState. Those implementations depend
on the service locator and therefore the entire interactivity stack.
This meant that anybody depending on just Types had to pull in **the
entire host** worth of dependencies (!).
Since these functions are only used in places where we have or are
testing interactivity, it makes sense to consolidate them here.
`CascadiaSettings::UpdateColorSchemeReferences` had two bugs in it:
1. we would never check/update the base layer
2. we would explicitly set the color scheme on a profile referencing the
old name
This PR fixes both of those issues by checking/updating the base layer,
and ensuring that we check if a profile has an explicit reference before
updating it.
Since the affected code is in TSM, I also created an automated local
test.
## Validation Steps Performed
Bug repro steps.
Specifically tested [DHowett's scenario] too.
Test added.
Closes#9094
[DHowett's scenario]: https://github.com/microsoft/terminal/issues/9094#issuecomment-776412781
* Currently TerminalPage registers on CmdPal key events:
* To invoke bindings when the palette is open
* Since some key combinations are not triggered by KeyDown
it registers for PreviewKeyDown
* As a result bindings might be preferred over navigation
(e.g., ctrl+v will paste into Terminal rather than into search box)
* To fix this, I moved all interactions inside the CmdPal into
PreviewKeyDown as well
* In addition, added specific handling for copy/paste
which now allow to interact with search box even if not focused
Closes#9044
Teaches renderer base to keep thread alive if engine requests it.
`DxEngine` now requests it if shaders are on.
- The render engine interface now has a true/false to return whether the
specific renderer wants another frame to immediately follow up. The
renderer base will ask for this information as it ends the paint on
any particular engine (which is the time where invalid regions are
typically cleaned up) and just poke the render thread the same as if
an invalidation request came in from outside of render-land. That will
trigger the render thread to just keep moving in the same way as any
other invalidation.
## Validation Steps Performed
- [x] Actually built it
- [x] Actually try it
I promised this in #8994
## Summary of the Pull Request
**If you're reading this PR and haven't signed off on #8135, go there first.**
This provides the basic parts of the implementation of #4472. Namely:
* We add support for the `--window,-w <window-id>` argument to `wt.exe`, to allow a commandline to be given to another window.
* If `window-id` is `0`, run the given commands in _the current window_.
* If `window-id` is a negative number, run the commands in a _new_ Terminal window.
* If `window-id` is the ID of an existing window, then run the commandline in that window.
* If `window-id` is _not_ the ID of an existing window, create a new window. That window will be assigned the ID provided in the commandline. The provided subcommands will be run in that new window.
* If `window-id` is omitted, then create a new window.
## References
* Spec: #8135
* Megathread: #5000
* Project: projects/5
## PR Checklist
* [x] Closes#4472
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - **sure does**
## Detailed Description of the Pull Request / Additional comments
Note that `wt -w 1 -d c:\foo cmd.exe` does work, by causing window 1 to change
There are limitations, and there are plenty of things to work on in the future:
* [ ] We don't support names for windows yet
* [ ] We don't support window glomming by default, or a setting to configure what happens when `-w` is omitted. I thought it best to lay the groundwork first, then come back to that.
* [ ] `-w 0` currently just uses the "last activated" window, not "the current". There's more follow-up work to try and smartly find the actual window we're being called from.
* [ ] Basically anything else that's listed in projects/5.
I'm cutting this PR where it currently is, because this is already a huge PR. I believe the remaining tasks will all be easier to land, once this is in.
## Validation Steps Performed
I've been creating windows, and closing them, and running cmdlines for a while now. I'm gonna keep doing that while the PR is open, till no bugs remain.
# TODOs
* [x] There are a bunch of `GetID`, `GetPID` calls that aren't try/caught 😬
- [x] `Monarch.cpp`
- [x] `Peasant.cpp`
- [x] `WindowManager.cpp`
- [x] `AppHost.cpp`
* [x] If the monarch gets hung, then _you can't launch any Terminals_ 😨 We should handle this gracefully.
- Proposed idea: give the Monarch some time to respond to a proposal for a commandline. If there's no response in that timeframe, this window is now a _hermit_, outside of society entirely. It can't be elected Monarch. It can't receive command lines. It has no ID.
- Could we gracefully recover from such a state? maybe, probably not though.
- Same deal if a peasant hangs, it could end up hanging the monarch, right? Like if you do `wt -w 2`, and `2` is hung, then does the monarch get hung waiting on the hung peasant?
- After talking with @miniksa, **we're gonna punt this from the initial implementation**. If people legit hit this in the wild, we'll fix it then.
1. Fix progress value not updated
2. Introduce TabStatus object and bind both TabHeaderControl and CommandPalette to it
3. Add support for read-only mode indicator
This is the spec for #597
I am proposing the `tabWidthMode` feature be added first, then `tabWidthMin` and `tabWidthMax` be added in a later release.
PR: #3876
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
The TerminalSettings object we create from profiles no longer gets passed into the control, instead, a child of that object gets passed into the control. Any overrides the control makes to the settings then live in the child. So, when we do a settings reload, we simply update the child's parent and the overrides will remain.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing
## Summary of the Pull Request
Introduces the `SettingContainer`. `SettingContainer` is used to wrap a setting in the settings UI and provide the following functionality:
- a reset button next to the header
- tooltips and automation properties for the setting being wrapped
- a comment stating if you are currently overriding a setting
## References
[Spec - Inheritance in Settings UI](https://github.com/microsoft/terminal/blob/main/doc/specs/%231564%20-%20Settings%20UI/cascading-settings.md)
#8804 - removes the ambiguity of leaving a setting blank
#6800 - Settings UI Epic
#8899 - Automation properties for Settings UI
#8768 - Keyboard Navigation
## PR Checklist
* [X] Closes#8804
## Detailed Description of the Pull Request / Additional comments
A few highlights in this PR:
- CommonResources.xaml:
- we need to merge the SettingContainerStyle.xaml in there. Otherwise, XAML doesn't merge these files properly and can't apply the template.
- Profiles.cpp:
- view model checks if the starting directory and background image were reset, to determine which value to show when unchecking the special value
- `Profiles::OnNavigatedTo()` needs a property changed handler to update its own "Current<Setting>" and update the UI properly
- Profiles.xaml:
- basically wrapped all of the settings we want to be inheritable in there
- `Binding` is used instead of `x:Bind` in some places because `x:Bind` can't find the parent `SettingContainer` and gives you a compiler error.
- Resources.resw:
- had to set the "HeaderText" and "HelpText" on each setting container. Does a decent localization burden, unfortunately.
- `SettingContainer` files
- This operates by creating a template and applying that template over other settings. This allows you to inject the existing controls inside of this. This means that we need to provide our UIElements names and access/modify them via `OnApplyTemplate`
- We had to remove the header from each individual control, and have `SettingContainer` be in charge of it. This allows us to add the reset button in there.
- Due to the problem mentioned earlier about CommonResources.xaml, we can't reference anything from CommonResources.xaml.
- Using `DependencyProperty` to let us set a few properties in the XML files. Particularly, `Has<Setting>` and `Clear<Setting>` are what do all the heavy lifting of interacting with the inheritance model.
## Demo
## Validation Steps Performed
- Verified correct binding behavior with the following generic setting controls:
- radio buttons
- toggle switch
- text block
- slider
- settings with browse buttons
- the background image alignment control
- controls with special check boxes (starting directory and background image)
## Next Steps
- The automation properties have been verified using NVDA. This is a part of resolving #8899.
- The override text is currently "Overrides a setting". According to #8269, we actually want to add a hyperlink in there that navigates to the parent profile object. This will be a follow-up task as it requires settings model changes.
## Summary of the Pull Request
Introduces read-only panes.
When pane is marked as read-only:
1. Attempt to provide user input results in a warning
2. Attempt to close pane - shows dialog
3. Attempt to close hosting tab shows dialog
4. The hosting tab has no close button
## PR Checklist
* [x] Closes#6981
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated - not yet.
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
1. The readonly logic implemented in `TermControl`
(and prevents any send input)
2. Special handling is required to allow key-bindings
3. The "close-readonly" protections are in TerminalPage.
4. The indication that the pane is readonly is done using lock glyph
5. The indication that the tab contains readonly pane
is done by hiding the close button of the tab
6. The readonly mode is enabled by keyboard shortcut
(the followup might add this to the context menu)
## Validation Steps Performed
## Summary of the Pull Request
Fixes#5205, by replacing another use of `MapVirtualKeyW` with `ToUnicodeEx`.
The latter just seems to be much more consistent at translating key combinations in general.
In this particular case though it fixes the issue, because there's no differentiation in `MapVirtualKeyW` for whether it failed to return a character (`'\0'`) or succeeded in turning `^@` into `'\0'`.
`ToUnicodeEx` on the other hand returns the success state separately from the translated character.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5205
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #5205
## Detailed Description of the Pull Request / Additional comments
This PR changes the behavior of the `Ctrl+Alt+Key` handling slightly:
⚠️ `ToUnicodeEx` returns unshifted characters. ⚠️
For instance `Ctrl+Alt+a` is now turned into `^[^a`. Due to how ASCII works this is essentially the same though because `'A' & 0b11111` and `'a' & 0b11111` are the same.
## Validation Steps Performed
* Run `showkey -a`
* Ensured `Ctrl+Alt+Space` as well as `Ctrl+Alt+Shift+2` are turned into `^[^@`
* Ensured other, random `Ctrl+Alt+Key` combination behave identical to the current master
This adds "paste filtering" & "bracketed paste mode" to the Windows
Terminal.
I've moved the paste handling code in `TerminalControl` to
`Microsoft::Console::Util` to be able to easily test it, and the paste
transformer from `TerminalControl` to `TerminalCore`.
Supersedes #7508
References #395 (overall bracketed paste support request)
Tests added. Manually tested.
The command palette is ephemeral and is dismissed if the focus
moves to an element which is not the palette's descendant.
Unfortunately, this breaks the (right-click) context menu,
as it is not a child of the palette
(popups are hosted on a separate root element).
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Spec for #3062
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Is documentation
* [ ] Schema updated.
* [x] I work here
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Read the spec
- Fixes empty app title when `showTerminalTitleInTitlebar` is false
- Fixes Tab title propagation to Window title when
`showTerminalTitleInTitlebar` is false
- Fixes Tab title propagation to Window - title doesn't update when
Window is unfocused
1. There were a missing
`_settings.GlobalSettings().ShowTitleInTitlebar()` check. Because of
this Title update event was being fired even when
`showTerminalTitleInTitlebar` is false. This results in empty tab
title to propagate to Window title. Also then after switching tabs
back and forth, tab title propagates to window title. These shouldn't
propagate when `showTerminalTitleInTitlebar` is false. I added the
`showTerminalTitleInTitlebar` check in relevant logic to fix the
behavior.
2. Code was checking `tab.FocusState() != FocusState::Unfocused` , but
when the whole terminal window is not in focus, the active tab is
also in Unfocused state. This was preventing tab title to propagate
to window title when application is unfocused. I added the logic of
checking matching selected tabs' index. This fixes the issue.
## Validation Steps Performed
I did the reproduce steps descripted in the issue to reproduce the bugs.
After applying the fixes, the bugs don't appear anymore while doing the
reproduce steps.
Closes#8704
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/4472-window-management/doc/specs/%235000%20-%20Process%20Model%202.0/%234472%20-%20Windows%20Terminal%20Session%20Management.md) ⇐
## Summary of the Pull Request
This is a more detailed spec for two parts of the "Process Model 2.0" work that's being tracked in #5000. In particular, this spec focuses on the management of Windows Terminal windows, including opening new tabs in existing windows.
Largely, the reader is expected to have already read the spec in progress in #7240, and already be familiar with the concept of "Monarch" and "Peasant" windows as introduced by that spec. For that reason, ⚠ **THIS PR IS TARGETING THE BRANCH FOR #7240** ⚠.
### Abstract
> This document is intended to serve as an addition to the [Process Model 2.0
> Spec]. That document provides a big-picture overview of changes to the entirety
> of the Windows Terminal process architecture, including both the split of
> window/content processes, as well as the introduction of monarch/peasant
> processes. The focus of that document was to identify solutions to a set of
> scenarios that were closely intertwined, and establish these solutions would
> work together, without preventing any one scenario from working. What that
> document did not do was prescribe specific solutions to the given scenarios.
>
> This document offers a deeper dive on a subset of the issues in [#5000], to
> describe specifics for managing multiple windows with the Windows Terminal. This
> includes features such as:
>
> * Run `wt` in the current window ([#4472])
> * Single Instance Mode ([#2227])
## PR Checklist
* [x] Specs: #4472, Specs #2227
* [x] References: #5000, #4472, #2227, #7240
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
### Why are these two separate documents?
I felt that the spec that is currently in review in #7240 and this doc should remain separate, yet closely related documents. #7240 is more about showing how this large set of problems discussed in #5000 can all be solved technically, and how those solutions can be used together. It establishes that none of the proposed solutions for components of #5000 will preclude the possibility of other components being solved. What it does _not_ do however is drill too deeply on the user experience that will be built on top of those architectural changes.
This doc on the other hand focuses more closely on a pair of scenarios, and establishes how those scenarios will work technically, and how they'll be exposed to the user.
### TODO:
* [x] A thought - How will we handle arguments like `--fullscreen`, `--initialSize r,c`? They only apply when creating a new window, right?
* [x] When a `wt -s 1 split-pane` command is executed, we'll need to make sure to not _also_ create a new tab
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/5000/doc/specs/%235000%20-%20Process%20Model%202.0/%235000%20-%20Process%20Model%202.0.md) ⇐
## Summary of the Pull Request
This spec is _exceptionally long_, and is currently a work in progress. There are a few more things I'd like to have experimentally verified (though, I'm fairly certain they _will_ work, with the right combination of flags and such). Additionally, a few sections have remaining TODOs before the spec is finished. However, this spec is already fairly long, and I want to give people as much time to get their eyes on it as possible.
### Abstract
>
> The Windows Terminal currently exists as a single process per window, with one
> connection per terminal pane (which could be an additional conpty process and
> associated client processes). This model has proven effective for the simple
> windowing we've done so far. However, in order to support scenarios like
> dragging tabs into other windows, or having one top-level window with different
> elevation levels within it, this single process model will not be sufficient.
>
> This spec outlines changes to the Terminal process model in order to enable the
> following scenarios:
>
> * Tab Tearoff/ Reattach ([#1256])
> * Run `wt` in the current window ([#4472])
> * Single Instance Mode ([#2227])
> * Quake Mode ([#653])
> * Mixed Elevation ([#1032] & [#632])
## PR Checklist
* [x] Specs: #5000
* [x] References: #1256, #4472, #2227, #653, #1032, #632, #492
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
"disabledProfileSources" is saved to `CascadiaSettings` _not_
`GlobalAppSettings` (and, even then, it's only read when it's used,
never saved). This PR specifically detects if it was defined in
settings.json, and copies it over when the settings are serialized.
## Validation Steps Performed
1. Added "disabledProfileSources" to settings.json, then serialized. -->
"disabledProfileSources" is now maintained.
2. Updated `CascadiaSettings` serialization test
Closes#9032
## Summary of the Pull Request
Fix for #9021
Turns out that what was happening is that the _parent_ pane's `Closed` event was being caught by the tab, and parent panes always have `nullopt` as their id. So now the `Pane::Id()` call always returns an optional, allowing us to check if it has a value before we access it.
## PR Checklist
* [x] Closes#9021
## Validation Steps Performed
No more crash
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- Adds two simple animated shaders to the pixel shaders sample folder
- Updates the readme in the pixel shaders sample folder to add a section explaining the animated shaders
- Modifies some comments in existing shader samples
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8994
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The two shaders I wrote are not especially pretty or interesting, but they should hopefully serve as simple examples for anyone looking to do animated effects. One simply draws a line of inverted pixels that scrolls down the screen, and the other fades the background back and forth between two colors.
I've added a new section to the readme explaining how the shaders work to achieve animated effects.
I've also updated the comments on the existing shaders to clear up a couple of things:
1. Be more explicit that `Time` represents seconds since the shader loaded. Though obvious in hindsight, this was not clear to me when I was first learning/experimenting
2. Explain that `tex` ranges from 0,0 to 1,1. This is important because, when trying to port GLSL shaders from shadertoy, I at first assumed `fragCoord` and `tex` are the same thing but the former actually ranges from 0,0 to the resolution of the canvas, so some of the math doesn't work out if you just substitute it with `tex`.
Any and all feedback welcome.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I ran the shaders manually in a dev build of the Terminal. I auto-spellchecked and manually proofread my additions to the readme and verifed the markdown rendering on github.
This PR fixes the parsing of OSC 9;9 sequences with path surrounded by
quotation marks.
Original OSC 9;9 PR: #8330
Unit test added. Manually tested with oh-my-posh.
Closes#8930
* Fix the incorrect terminalCore path in tests.xml
* Change the -TaefArgs argument of Invoke-OpenConsoleTests and
Invoke-TaefInNewWindow to be []string, allowing
multiple arguments to be passed to TAEF
This adds the support for chaining OSC 10-12, allowing users to set all
of them at once.
**BREAKING CHANGE**
Before this PR, the OSC 10/11/12 command will only be dispatched iff the
first color is valid. This is no longer true. The new implementation
strictly follows xterm's behavior. Each color is treated independently.
For example, `\e]10;invalid;white\e\\` is effectively `\e]11;white\e\\`.
## Validation Steps Performed
Tests added. Manually tested.
Main OSC color tracking issue: #942
OSC 4 & Initial OSC 10-12 PR: #7578
Closes one item in #942
### Plurals and paste tenses
In the past, plurals `foo`+`s` and past tenses `foo`+`ed` were
automatically tolerated. This turned out to be a bad design choice on my
part.
The basic example is that `potatos` would sometimes be treated as a
mistake and sometimes not (depending on the presence of `potato`).
You can see in this PR, that this logic resulted in `Applys` being
accepted as a word along with `AppContainered` -- there's nothing
intrinsically wrong w/ the latter, but unfortunately in order to screen
out the former, my shortcut just couldn't stick around. This means that
the `dictionary`/`expect` files will grow perhaps by a tiny bit, but as
you can see, not really by much.
This is also why `thereses` (a user) was accepted as a word in the past
(therese is in the base dictionary, so `therese` + `s` was acceptable).
### Pull requests
When GitHub initially introduced GitHub Actions, the event for
`pull_request` was created without enough permission for a tool like
this to work properly. I worked around that by using the `schedule`
event. In 2020, they introduced a replacement event
`pull_request_target` which has enough permission. This means that I can
stop relying on the `schedule` event.
### Miscellaneous
* I've folded together some `expect/` files since now is as good a time
as any.
* I've included a hint about `excludes.txt` (I added a similar one for
our primary repo recently, and it came up this week in
`microsoft/terminal` -- @zadjii-msft)
* I've standardized on a default of `.github/actions/spelling` to make
the out of the box experience easier for new adopters, so I'm applying
that change here -- if you're attached to the old directory name,
specifying it is still supported. -- note the directory rename may
cause a merge conflict for people with open PRs and changes to the
contents, this shouldn't be a big problem.
The settings.json was not regenerated if WT was already open. This resulted in the `ShellExecute` from trying to open the settings to pop up Notepad and say that this file didn't exist. We now detect if the settings.json was deleted to kick off loading the settings.
Closes#8955
Pressing Ctrl+\ produces `^\` using the US keyboard layout, thanks to Ctrl-key mappings inside the keyboard layout, whereas some layouts, like the UK extended layout, don't contain those. This causes the character value to be zero and previously caused no VT sequence to be generated under these situations. This PR employs `MapVirtualKeyW` to infer the missing characters.
As a side effect this PR effectively causes _all_ major keys on the keyboard to produce Ctrl+combinations now.
## PR Checklist
* [x] Closes#8458
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests passed
## Validation Steps Performed
Compared all major keys in combination with Ctrl with the app store version of Terminal using `showkey` in WSL. All keys that previously worked still appear to continue to work.
Correctly sets the time input on the pixelShaderSettings struct, which was previously hard-coded to `0.0f`.
## PR Checklist
* [x] Closes#8935
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8935
## Detailed Description of the Pull Request / Additional comments
I added a private field to `DxEngine` to store the timestamp for when a custom shader is first loaded. The field is initialized in `_SetupTerminalEffects()`, and the calculated time value (seconds since the timestamp) passed to the actual shader is set in `_ComputePixelShaderSettings()`.
There remains an issue with with jerky animation due to the renderer not repainting when the window contents are not updated (see discussion in the original issue).
This is basically my first time writing C++; constructive review is enthusiastically welcomed 🙂
## Validation Steps Performed
I manually tested using a variety of simple shaders that rely on time input for animation.
## Summary of the Pull Request
Oops, winrt `IVector`s need to be manually initialized, when default-constructed `std::vector`s didn't. Simple oversight.
## PR Checklist
* [x] Closes#8986
* [x] I work here
* [x] A test would be great but ain't nobody got time for that.
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Ran the terminal with
```json
"schemes" :
[ {} ]
```
First the crash repro'd, now it doesn't.
If there is data being output when a tab is closed, that can sometimes
result in the application crashing, because the renderer may still be in
use at the time is it destroyed. This PR attempts to prevent that from
happening by adding a lock in the `TermControl::Close` method.
What we're trying to prevent is the connection thread still being
active, and potentially accessing the renderer, after it has been
destroyed. So by acquiring the terminal lock in `TermControl::Close`,
after we've stopped accepting new output, we can be sure that the
connection thread is no longer active (it holds the lock while it is
processing output). So once we've acquired and released the lock, it
should be safe to tear down and destroy the renderer.
## Validation Steps Performed
While this crash is difficult to reproduce in general usage, it occurred
quite frequently when testing my `DECPS` implementation (there is some
tricky thread synchronisation, which seems more likely to trigger the
issue). With this patch applied, though, those crashes have stopped
occurring.
I've also stepped through the shutdown code in the debugger, manually
freezing threads to get them aligned in the right way to trigger the
crash (as explained in issue #8734). Again with the patch applied, I can
no longer get the crash to occur.
Closes#8734
I added some sample screenshots on the README for the pixel shader feature
Fixes#8960
## Detailed Description of the Pull Request / Additional comments
I created 4 screenshots using preview windows terminal, one for the default look, and three for the shaders mentioned in the readme.
For the first shader, `Invert.hlsl`, I put it in a table and placed a screenshot of the default next to it. I don't think it would be clear what the shader did without being able to compare it against the default.
For `Rasterbars.hlsl` I put a screenshot right after the code sample for it. I added a screenshot for `Retro.hlsl` just before the last sentence
I also created a folder named Screenshots in `terminal/samples/Pixelshaders` to hold all of the screenshots.
Fix a bug brought in with PR: #8638
see,
#8936#8638
* [x] Closes#8936
* [x] CLA signed
* [x] Tests passed
With the help from @nc-x, the issue is reproduced and fixed by this patch.
CLSCTX_IN_PROCESS is not good enough for all cases to create IShellWindows interface.
Put a CLSCTX_ALL fixes the issue.
Another debugging warning dialogs for reusing not null com_ptr in the loop is fixed too.
(This was shown in debug builds only)
## Summary of the Pull Request
Properly binds `CurrentLaunchMode` and `CurrentTabSwitcherMode` in the Settings UI. The default mode is `OneTime`, resulting in the setting never being set.
I performed a regex search of all "SelectedItem" bindings and these were the only two that were not properly bound.
## References
#6800 - Settings UI Epic
## Validation Steps Performed
Modified tab switcher mode and launch mode via the settings UI. Then saved. Before, the settings would revert back and not get applied. Now they got applied.
Closes#8947
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8975
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
* We dismiss the edit each time `HeaderRenamerTextBox` loses focus
* Unfortunately, this applies also to scenario where the context menu
(copy, paste, select, etc.) is open with the right-click
* The fix is to ignore focus loss if `HeaderRenamerTextBox().ContextFlyout()` is open.
* We can do it as upon the fly-out dismiss the text box regains the focus.
Watson reports show that an "ArgumentException" is being thrown due to `renderSize`
not being valid. Added a check for renderSize before attempting to resize.
This is an extension of #8885. A lot of users have grown accustomed to
using `closePane` to close a tab. This adds `closePane` to the list of
keybindings accepted by #8885, and modifies the `closePane` code to
close the Settings UI if we are in a `SettingsTab`.
## References
#6800: Settings UI Epic
#8885: PR - Settings UI should respect key bindings (temporary solution)
#8882: Issue - Settings UI should respect key bindings
## Summary of the Pull Request
Apparently, we don't need this `TargetRuntime`. That's what was causing VS to think that we were a C# project, and give us that warning. This is the solution we got from the owner of the `.wapproj` plugin.
## References
* Introduced in c33883d852, in PR #8062
## PR Checklist
* [x] Closes#8301
* [x] I work here
Build and ran it fine. Changed TermControl, built and ran it fine. Now let's hope CI likes it.
This reverts the revert in #8838.
The problem was that the `Profile` in the singleton nav state would be
updated before the binding fired, so we'd end up modifying the _new_
profile, because both the old page and the new page would be pointing at
the _new_ profile already.
Instead of using a singleton instance of the profile nav state, we'll
create a new one each time. The new nav state attempt to steal the
selected pivot from the last instance of the nav state, if the profiles
are the same. This means that
This means that we won't end up modifying the new profile. The old
page's nav state will still have the old profile, so it'll still end up
modifying the old `ProfileViewModel`.
## PR Checklist
* [x] I work here
* [x] Tested manually
* [x] Fixes the first point in #8769, again
This PR adds support for the `DECID` (Identify Device) escape sequence,
which allows for querying the terminal type in a way that is backwards
compatible with VT52 terminals.
This simply checks for the `ESC Z` sequence in the `ActionEscDispatch`
method of output state machine, and forwards the query to the existing
`DeviceAttributes` dispatch method, since the expected response is
identical to a `DA` report.
## Validation Steps Performed
I've added an output engine test that verifies that the `ESC Z` sequence
is correctly interpreted as a `DA` query when in ANSI mode, and as a
VT52 identification query when in VT52 mode.
Closes#8857
When we emit a BEL (visual or audible), show an indicator in the tab
header
If the tab the BEL is coming from is not focused when the BEL is raised,
the indicator in its header will be removed when the tab gains focus. If
the tab was already focused when the BEL was emitted, then the indicator
goes away after 2 seconds.
Closes#8106
Make the "use parent process directory" checkbox rely on a computed
property in the ProfileViewModel. It will be enabled when the starting
directory is empty and disabled when it's not. When it's unchecked, the
last-used value will be restored. If there is no last-used value, it
will be set to %USERPROFILE%.
Closes#8805
This adds a "Name" text box to the Profile page in the Settings UI.
Any changes to the name/icon are propagated to the relevant
NavigationViewItem.
Base Layer does not have a "Name".
## References
#6800 - Settings UI Epic
## Summary of the Pull Request
This fixes a bug where renaming/deleting a color scheme would not update profiles that referenced it.
This also adds detection for renaming a color scheme to a name that is already in use, and adds appropriate UI for that.
## References
#6800 - Settings UI Epic
## PR Checklist
* [X] Closes#8756
## Detailed Description of the Pull Request / Additional comments
`Model::CascadiaSettings` was updated to have a `UpdateColorSchemeReferences()` function that updates all profiles referencing the newly renamed color scheme.
`Editor::ColorSchemesPageNavigationState` now takes and exposes a `Model::CascadiaSettings`.
When a color scheme is renamed or deleted, we use `CascadiaSettings` to update our list of color schemes appropriately, then call `UpdateColorSchemeReferences()` to update the profiles.
The tricky part is that `Profile` does not store a direct reference to `ColorScheme`, but rather the name of the color scheme. See [this tread](https://github.com/microsoft/terminal/issues/8756#issuecomment-760375027) for a discussion on this topic.
## Validation Steps Performed
Repro steps from #8756 when renaming/deleting a referenced color scheme.
## Demo
This adds the skeleton code for "bracketed paste mode" to the Windows
Terminal. No actual functionality is implemented yet, just the wiring
for handling DECSET/DECRST 2004.
References #395
Supersedes #7508
Initialize stack variables. check return code from shell lnk loading (GH-8712)
## References
* Commit f273aa679d4d9fb516678fc7ed5fc6495a8e8532 from os repository.
## Detailed Description of the Pull Request / Additional comments
* We found and fixed this in November 2017, but I fumbled the replication and accidentally overwrote the commit. This digs it up from history and puts it back in our code.
* When the shortcut file cannot be read for whatever reason, we are setting the hotkey value to uninitialized data as we never initialize several members on the stack in this function. It just so happens that the one in the `dwHotkey` field is commonly `0x4c` or the letter `L` which is then sent into the window procedure to tell the OS to capture it as a global hotkey and foreground the `conhost.exe` that was started. We should realize the load failure and not set any hotkey at all and we should initialize the stack variables. This does both.
## Validation Steps Performed
* [x] Manual scenario running LNK file that cannot be loaded from customer report (make LNK to cmd.exe, make it inaccessible to conhost so it can't load/read it.)
* [x] Manual scenario with `mklink`'d link that makes the shortcut parser attempt to load (and fail because it isn't a LNK at all from GH-7650)
Fixes MSFT-31351620
The Windows build system doesn't support PMR yet, so we had to add a workaround. :(
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 1614b27830a07484c18628ec7d9abc5f9d9b8a0b
Related work items: MSFT-31337042
This reverts commit a7d7362b95 introduced by #8803.
Reverting this commit fixes#8836 at the expense of the profile page
remembering the last Pivot selection. The
## References
#6800 - Settings UI Epic
#8803 maintained a `ProfilePageNavigationState` in `MainPage` to remember
the pivot position. However, the two-way binding on the TextBoxes
now seem to happen too late (after the navigation occurs),
resulting in the text being applied to the wrong profile. In other
words, the sequence of events probably looks something like this:
1. user types text (_state.profile = old profile)
2. user moves to new profile
3. navigation completes (_state.profile = new profile)
4. textbox two-way binding fires, setting _state.profile.WHATEVER = value
## Validation Steps Performed
Performed repro sets from #8836. Bug no longer occurs.
Reopens#8769Closes#8836
Upon a settings reload, we would select the correct navigation item for
a profile, but navigate to the old one. As a result, you would navigate
to the old page that points to a dead profile object. This would make it
appear like you did not discard/save the changes.
This bugfix navigates to the newly created profile, ensuring that your
changes are actually applied to the settings model's clone in use.
## References
#8773 - Introduced the bug
#6800 - Settings UI Epic
## Validation Steps Performed
- Navigate to "powershell" profile
- edit "tab title" value
- discard changes
Before: changes would persist unless you discarded changes again
Now: changes are discarded
Also verified expected behavior occurs when you click "save" instead of
"discard"
Moving things out of CharRow into ROW helps us hide it as an implementation detail.
This is part one of many.
### CharRow: Hide ClearCell, use ROW::ClearColumn
### CharRow: Hide GetText, use ROW::GetText
### CharRowBaseTests: remove dead file (never used!)
### CharRow: Move DoubleBytePadded into ROW
### CharRow: Move WrapForced into ROW
### Char/AttrRow: Hide Reset, use ROW::Reset
### Remove RowCellIterator (dead code)
RCI was unused; it was replaced by TextBufferCellIterator shortly after its creation
### Move AttrRowTests to ut_textbuffer from ut_host
It had no reliance on the host.
Cleans up a ton of competing and outdated sources from our NuGet.Config to improve reliability and maintainability.
## PR Checklist
* [x] Closes an overdue-to-clean mess.
* [x] I work here.
* [x] Tests covered below.
* [x] I've discussed this with @DHowett already.
## Validation Steps Performed
- [x] - NuGet restored everything I could get my hands on (all `packages.config`) in our project before and after the change.
- [x] - The build and tests still run fine. (PR automation should check this one)
A part of the #8415.
Includes:
* Moving `TabSwitcherMode` related decisions into `CommandPalette`
(simplifying the logic of `TerminalPage::SelectNextTab`)
* Fix a bug where the index of first tab switch is incorrect
(since bindings are not updated)
* Removing redundant `CommandPalette` updates
* Preparations for tabs binding
Removes the visibility hack in `UpdateSettings` where we were hiding
Profile menu items instead of removing them. This hack was removed using
`ReplaceAll`. For an unknown reason, calling `Remove()` would result in
an out-of-bounds error in XAML code.
The "Discard" button would improperly refresh the Settings UI. Both of
the bugs were caused by holding a reference to a hidden menu item then
trying to set the `SelectedItem` to that menu item.
Additionally, 9283375 adds a check for the selected item in
`SettingsNav_ItemInvoked()`. This prevents navigation to an already
selected item. This was the heuristic used by the XAML Controls Gallery.
References #6800 - Settings UI Epic
## Validation Steps Performed
(Repeated for each menu item)
1. Select the menu item
2. click "Discard changes"
3. Verify navigated to same page
Also performed repro steps for #8747 and #8748.
Closes#8747Closes#8748
This PR adds a sample monarch/peasant application. This is a type of
application where a single "Monarch" can coordinate the actions of multiple
other "Peasant" processes, as described by the specs in #7240 and #8135.
This project is intended to be a standalone sample of how the architecture would
work, without involving the entirety of the Windows Terminal build. Eventually,
this architecture will be incorporated into `wt.exe` itself, to enable scenarios
like:
* Run `wt` in the current window (#4472)
* Single Instance Mode (#2227)
For an example of this sample running, see the below GIF:
This sample operates largely by printing to the console, to help the reader
understand how it's working through its logic.
I'm doing this mostly so we can have a _committed_ sample of this type of application, kinda like how VtPipeTerm is a sample ConPTY application. It's a lot easier to understand (& build on) when there aren't any window shenanigans, settings loading, Island instantiation, or anything else that the whole of `WindowsTerminal.exe` needs
* [x] I work here
* [x] This is sample code, so I'm not shipping tests for it.
* [x] Go see the doc over in #8135
This PR Makes sure that after you save the settings, we stay on the same part of the profiles pivot. We do this by having a singleton `ProfilesNavigationState`, a bit like the color scheme one in #8799. Hence why this PR is targeting the other.
## PR Checklist
* [x] I work here
* [x] Tested manually
* [x] Fixes the first point in #8769
## Summary of the Pull Request
This PR fixes two of the components of #8765.
> * [ ] Edit a color scheme -> Hit 'apply' -> the selected color scheme resets to the first color scheme in the list (instead of the one just edited)
This was fixed by storing the navigation state as a singleton in MainPage, and having the color schemes page update the selected scheme on that singleton. That way, a subsequent navigation to the schemes page could re-use the existing state.
> * [ ] The buttons turn gray on rollover covering up what color I'm looking at (I have dark mode)
This one was tricky. We're binding the resource for this button, to the color the button is bound to. We're also running a converter on that color, as to change the alpha slightly. This allows us to still have visual feedback on pointerover, without obscuring the color entirely.
## PR Checklist
* [x] I work here
* [x] Tested manually
`til::details::bitmap<Allocator>` will use `Allocator` for its
`dynamic_bitset`, and it will use a rebound allocator for its run storage.
Allocator should be an allocator type storing `unsigned long long`, the
backing store type for `dynamic_bitset`.
I've introduced a type alias, `til::bitmap`, which papers over the
allocator choice for all existing code. I've also introduced a second
type alias, `til::pmr::bitmap`, which lets a consumer use the C++
polymorphic allocator system.
I chatted with @miniksa about whether to keep the "full" allocator
version in `details` or not. We decided that for the simplicity of the
`til` namespace, we would. If anybody has a compelling reason to use
`til::details::bitmap<Allocator>` directly, we can re-evaluate this
decision.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/2886
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Currently the tab tool tip is the tab's title.
The PR teaches the TabBase to check if there is a switch to tab command
associated with the current tab index,
if so concatenates the the relevant mapping to the too tip.
Of course, prefers user defined bindings to the default ones.
Moved tool tip logic to TabBase so SettingsTab has tooltip as well.
The following code didn't previously work as the assignment operators
didn't return a self reference:
```cpp
auto channel = til::spsc::channel<QueueItem>(100);
auto producer = std::move(channel.first);
channel.first = std::move(producer);
```
## Validation Steps Performed
I've added a basic smoke test for `til::spsc`.
Closes#8695
## Summary of the Pull Request
Two parts:
* Hide the BG image settings when no image is specified
* Add a checkbox for "Use desktop wallpaper". When that's checked, the BG image path input is hidden. Unchecking that box restores the path to what it was before.
## PR Checklist
* [x] Closes#8763
* [x] I work here
## Validation Steps Performed
Tested manually
This is by no means comprehensive. It will be unmarked as draft when it
is more comprehensive.
This pull request adds some tests for resizing a TextBuffer and
reflowing its contents. Each test takes the form of an initial state and
a number of buffers of different sizes. The initial state is used to
seed the first TextBuffer, and the subsequent buffers are only used to
compare.
I manually reimplemented some of the DBCS logic to ensure that the
buffers contain _exactly_ what they're supposed to. I know this is
non-ideal. After some of the CharRow changes in #8446 land, this will
need to be updated.
There's a cool bit of TAEF gore in here: the IDataSource. An IDataSource
allows us to programmatically return test cases. It's a code-only
version of its support for parameterized tests of the form `Data:x = {0,
1, 2}` .
The only downsides are...
1. It looks like COM (it is not using COM under the hood, just the COM
ABI)
2. Property values must be returned as strings.
To best support rich test types, I used IDataSource to produce _a lit of
array indices_ and nothing more. The test is run once for array member,
and it is the test's responsibility to look up the object to which that
index refers.
Works great though! Each reflow test is its own unit, and a failure in
an earlier reflow test will not tank a later one.
Procedural solution for https://github.com/microsoft/terminal/issues/756.
Introduces a `startupActions` global setting.
This setting is as string with the same format as actions in command line arguments.
It is used only if command line arguments were not provided
(aka running pure wt.exe).
The setting allows implicit new-tabs.
In the case of invalid syntax we show the warning dialog and ignore the setting.
The documentation PR is here: https://github.com/MicrosoftDocs/terminal/pull/217
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds a negative value check for when the terminal window is hidden/show in VS
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
[Bug 1265984](https://devdiv.visualstudio.com/DevDiv/_workitems/edit/1265984): [Terminal] VS crashes when clicking the hidden terminal tab
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual validation.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add checkbox for 'inherit from parent process' for starting directory
When checked, the textbox and browse button are disabled
If the starting directory is empty, the checkbox is automatically checked
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#8761
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
<img width="328" alt="pardir1" src="https://user-images.githubusercontent.com/26824113/104529798-64038980-55bf-11eb-93fd-75e6cf1e2547.png">
<img width="317" alt="pardir2" src="https://user-images.githubusercontent.com/26824113/104529803-66fe7a00-55bf-11eb-89b6-5b35c8ab89b8.png">
Sorts the list of `EnumEntry`s that is used to create combo boxes and
radio buttons in the Settings UI. `INITIALIZE_BINDABLE_ENUM_SETTING`
sorts the list in increasing order of the enum values, whereas
`INITIALIZE_BINDABLE_ENUM_SETTING_REVERSE_ORDER` does so in decreasing
order.
## References
#6800 - Settings UI Epic
I attempted sorting the `IObservableVector<EnumEntry>` using
`std::sort`, but I would get an error in
`winrt::Windows::Foundation::swap` (`C2665`). So instead, I did the
following approach:
- (unchanged) we're converting the `IMap` from EnumMappings into (1) a
map of localized strings and (2) the list for XAML controls
- instead of storing `EnumEntry`s to the `IObservableVector` directly,
store it to a `std::vector`
- sort the vector using `std::sort`
- _now_ initialize the `IObservableVector` using the sorted
`std::vector`
This uses the value of the associated enum to determine a sorting order.
Since we want the "negative" value (i.e. "none" or "hidden") to be last,
I use `EnumEntryComparator` and `EnumEntryReverseComparator` to
determine whether we want increasing or decreasing order respectively.
`INITIALIZE_BINDABLE_ENUM_SETTING_REVERSE_ORDER` is a copy of
`INITIALIZE_BINDABLE_ENUM_SETTING`, except it uses
`EnumEntryReverseComparator` to sort in decreasing order.
Closes#8758
Put some settings below the acrylic & background image settings. Those groups have controls that will become visible when the user enables the setting. If there's other controls below them, then it's less likely that the user has _exactly scrolled to the checkbox_. That means it's more likely that the newly visible controls will be on-screen.
* [x] closes one checkbox in #8764
* [x] I work here
Whenever you'd make a change to anything in the Terminal Control
project, then tried deploying the package, you'd get errors like
"Package contains two files with the same name and different content,
files are `Thing.xbf` and
`.../bin/x64/debug/TSM/TerminalControl/Thing.xbf`". It seems like
`GetPackagingOutputs` was double counting these xbfs as being both from
TerminalControl and also TSM&TSE. So if you'd change TerminalControl,
it'd change the xbf files, but not the ones in TSM/TSE, and then
eventually the wapproj would fail to put it all together.
This combination of flags seems to
* make mdmerge work
* make the packaging project work
* make a partial rebuild of TerminalControl followed by a deploy work
I'm hoping that this PR build will confirm that this works in CI as well.
## PR Checklist
* [x] Fixes this minor annoyance I've been having for the past 2 months
* [x] I work here
## Validation Steps Performed
Validated locally on VS 16.8.3. Sure to break by 16.9 🙃.
## Summary of the Pull Request
I forgot to reset the `--size` argument to `split-pane` when I added it. This PR fixes that, and adds a test so I don't regress it again.
## References
* Missed in #8543
## PR Checklist
* [x] I work here
* [x] Tests added/passed
When we display a dialog to warn the user that they are doing a
multi-line paste, we show the clipboard contents
The contents are shown in a scroll viewer with a fixed maximum height.
Closes#7997
Store the order of the bindings and upon lookup prefer the binding
that was added last.
The defaults will always "loose" to user overrides.
Closes#2991
## Summary of the Pull Request
Adds support for the `move-focus` subcommand to `wt.exe`. This subcommand works _exactly_ like `moveFocus(up|down|left|right)`.
## References
* Will surely conflict with #8183
* Is goodness even in the world where #5464 exists
## PR Checklist
* [x] Closes#6580
* [x] I work here
* [x] Tests added/passed
* [x] Docs PR: MicrosoftDocs/terminal#209
## Detailed Description of the Pull Request / Additional comments
Bear with me, I wrote this before paternity leave, so code might be a bit stale.
Oddly, after startup, this _does not_ leave the focus on the pane you moved to. If you `move-focus` during startup, at the end of startup, we'll still focus a _random_ pane. This is because the terminal still auto-focus a TermControl when it's done with layout. While we'll maintain the active control just fine during the startup, at the end of startup, all the controls will complete layout in a random order.
This is no different than the startup right now. `wt sp ; sp ; sp` will focus a random pane at the end. This is left for a future someone to fix
This is also subject to #2398 / #4692. Moving in a direction isn't _totally_ reliable currently. `focus-pane -t ID` will certainly be more reliable, but this will work in the meantime?
## Validation Steps Performed
Opened probably 100 terminals, confirmed that the layout was always correct. Final focused pane was random, but the layout was right.
## Summary of the Pull Request
This is a spec for "pane navigation", as we've already got a bit of an implementation in #8183. We've also had a heated discussion in Teams, and I wanted to capture a bit of that in a more formal doc. I suppose that "informal Teams chat" didn't work out in the end 😆.
Also, this is @PankajBhojwani's feature so I'm gonna let him drive. I mostly wrote this to test out a new spec template.
After discussion, we landed on proposal D, with a minor change of `last` to `prev`. This is how it was in #8183 before I started meddling 😝
## PR Checklist
* [x] spec for #2871
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
This is not my best spec ever - again, mostly just trying to spawn discussion, and prototype the new spec template.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR implement the OSC 9;9
|Sequence|Descriptoin|
| :------------- | :----------: |
|ESC ] 9 ; 9 ; “cwd” ST | Inform ConEmu about shell current working directory.|
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#8214
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#8166
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
- Detect `\r` when warning about multi line paste
- Translate `\n` to `\r` on paste
## PR Checklist
* [x] Closes#8601
* [x] Closes#5821
## Validation Steps Performed
Manual testing
Basically, just impose a height on both the renamer box and the overall
tab header control. However, to ensure that the text in the tab renamer
box does not get clipped by its own border, we also need to set its font
size, which is slightly smaller than it was before but it _is_ the same
as the text block that it is trying to rename so I'd say its more
consistent now.
We also improve the tab renamer box so that it scrolls as more text is
added instead of getting truncated (when the tabWidthMode is anything
other than titleLength). When the tabWidthMode _is_ set to titleLength,
the renamer box can increase in length much more (see GIFs below).
Closes#8519
Following up https://github.com/microsoft/terminal/pull/8586 by @Hegunumo,
fully remove the command dispatching logic from Command Palette.
Currently Command Palette might dispatch command in Tab Switcher mode.
This leads to several inconsistencies:
* Only the commands with the same key modifier as an ATS anchor will be issued
* This command will not close the TabSwitcher
(while commands issued from TerminalPage do).
Implementation details:
* Pass KeyMapping rather than binding to CommandPalette
* Use this mapping inside previewKeyDownHandler of ATS to detect
if previous tab or next tab bindings were engaged.
No need to handle Ctrl+Tab explicitly anymore -
it is handled as any other binding.
* Cleanup the logic in TerminalPage::_SelectNextTab
that checks if CommandPalette is visible.
It is not required anymore, as visible palette would intercept the call.
* Remove dependency of TerminalPage on AppLogic
that was introduced lately .
Adds a `Microsoft.Terminal.Remoting.dll` to our solution. This DLL will
be responsible for all the Monarch/Peasant work that's been described in
#7240 & #8135.
This PR does _not_ implement the Monarch/Peasant architecture in any
significant way. The goal of this PR is to just to establish the project
layout, and the most basic connections. This should make reviewing the
actual meat of the implementation (in a later PR) easier. It will also
give us the opportunity to include some of the basic weird things we're
doing (with `CoRegisterClass`) in the Terminal _now_, and get them
selfhosted, before building on them too much.
This PR does have windows registering the `Monarch` class with COM. When
windows are created, they'll as the Monarch if they should create a new
window or not. In this PR, the Monarch will always reply "yes, please
make a new window".
Similar to other projects in our solution, we're adding 3 projects here:
* `Microsoft.Terminal.Remoting.lib`: the actual implementation, as a
static lib.
* `Microsoft.Terminal.Remoting.dll`: The implementation linked as a DLL,
for use in `WindowsTerminal.exe`.
* `Remoting.UnitTests.dll`: A unit test dll that links with the static
lib.
There are plenty of TODOs scattered about the code. Clearly, most of
this isn't implemented yet, but I do have more WIP branches. I'm using
[`projects/5`](https://github.com/microsoft/terminal/projects/5) as my
notation for TODOs that are too small for an issue, but are part of the
whole Process Model 2.0 work.
## References
* #5000 - this is the process model megathread
* #7240 - The process model 2.0 spec.
* #8135 - the window management spec. (please review me, I have 0/3
signoffs even after the discussion we had 😢)
* #8171 - the Monarch/peasant sample. (please review me, I have 1/2)
## PR Checklist
* [x] Closes nothing, this is just infrastructure
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
In dark mode (and high contrast mode), color animation of title bar
button uses wrong color. Cause of this issue is using invalid data in
`ColorAnimation`. I fixed this bug by changing `ColorAnimation` value
in XAML layout file.
According to a [forum post], `To` value of `ColorAnimation` must be
frozen. But original source code uses "color binding" which makes this
value dynamic. As a result, the value set by default is always used,
that means, light mode.
So I added new resource named `CaptionButtonStrokeColor` and
`CaptionButtonBackgroundColor` which has static color value.
In light mode and dark mode, I set `SystemBaseHighColor` in the color
resource. `SystemBaseHighColor` is the same as
`SystemControlForegroundBaseHighBrush.Color` which is originally used in
animation.
The background color animation happened to work correctly because its
value is the same between light mode and dark mode. But I also fixed
background color animation.
## Validation Steps Performed
There is no need to add new test with this fix.
- I changed the `theme` value in `settings.json` and confirmed that the
correct color values were used.
- I confirmed that it works correctly even if the Windows theme is
changed.
[forum post]: https://social.msdn.microsoft.com/Forums/vstudio/en-US/027c364f-5d75-424f-aafd-7fb76b10b676/templatebinding-on-storyboard?forum=wpfCloses#7314
This commit makes "Open in Windows Terminal" Context menu work again for
directory background even on system that OS fix is not applied.
This is a fallback solution to OS fixes mentioned in #6414.
While OS fix is on its way, we need a fallback that works on existing OS
versions.
The approach to this is: when no item is selected (nullptr for
IShellItemArray*), we use shell api to query the path of current active
Explorer window. A special case is handled for Windows Desktop. Once
we are able to obtain the path, we launch Windows Terminal with it.
## Validation Steps Performed
1. Right click on desktop to bring up the Context menu, pick "Open in
Windows Terminal", verify that a terminal is opened with correct
initial path.
2. Open a few File Explorer windows, pick any window, navigate to a
folder, click on "Background" to bring up the context menu, click
"Open in Windows Terminal" verify that a terminal is opened with
correct initial path.
Closes#6414
## References
* Commit f273aa679d4d9fb516678fc7ed5fc6495a8e8532 from os repository.
## PR Checklist
* [x] Closes#7650
* [x] I work here.
* [x] Tests passed
## Detailed Description of the Pull Request / Additional comments
* We found and fixed this in November 2017, but I fumbled the replication and accidentally overwrote the commit. This digs it up from history and puts it back in our code.
* When the shortcut file cannot be read for whatever reason, we are setting the hotkey value to uninitialized data as we never initialize several members on the stack in this function. It just so happens that the one in the `dwHotkey` field is commonly `0x4c` or the letter `L` which is then sent into the window procedure to tell the OS to capture it as a global hotkey and foreground the `conhost.exe` that was started. We should realize the load failure and not set any hotkey at all and we should initialize the stack variables. This does both.
## Validation Steps Performed
* [x] Manual scenario running LNK file that cannot be loaded from customer report (make LNK to cmd.exe, make it inaccessible to conhost so it can't load/read it.)
* [x] Manual scenario with `mklink`'d link that makes the shortcut parser attempt to load (and fail because it isn't a LNK at all from #7650)
Converts the poly text out string and width buffers to use a memory pool since we free/alloc those every frame and are just going to reuse them over and over.
## PR Checklist
* [x] Supports #3075
* [x] I work here.
* [x] Profiled memory before/after. Tested manually with `big.txt`.
## Detailed Description of the Pull Request / Additional comments
- Sets up a PMR memory pool for the GDI Engine. It tends to alloc and free a bunch of little buffers during painting frames. The pool will likely hold onto that memory frame over frame, but we'd just be using it again and again and again anyway. So this way we avoid all the system memory allocator locks and syscalls.
## Validation Steps Performed
- Ran `big.txt` about 10x in the window. Checked WPR/WPA profile output before/after.
Make a few changes to memory usage throughout the application to reduce transient allocations from the `big.txt` test from ~213,000 to ~53,000.
## PR Checklist
* [x] Supports #3075
* [x] I work here.
* [x] Tested manually and WPR'd. Test suite should still pass.
* [x] Am core contributor
## Detailed Description of the Pull Request / Additional comments
Transient allocations are those that are new'd, used, then delete'd. Going back and forth to the system allocator for things we're just going to throw away or use rapidly again is a performance detriment. Not only is it a bunch of time to go ask the system with a syscall, it also hits a whole bunch of locks on the allocators. This PR identifies a few places where we were accidentally allocating and didn't mean to or were allocating and freeing just to turn around and allocate again. I chose other strategies to avoid this.
## Validation Steps Performed
- Ran `big.txt` sample (~6MB file) before and after. Observed heap allocations with WPR.
Performs a number of minor bugfixes related to the Settings UI:
- b5370a1 Dropdown bug:
- the dropdown would display the keybinding for the first
`openSettings` found. So it would accidentally present and bind the
one for the Settings UI.
- 91eb49e autogenerated name for opening Settings UI:
- the Settings UI keybinding would display "open settings file". This
was updated to say "Open Settings UI".
- 1cadbf4 Profile Page navigation crash:
- the selected item off of a MUX navigation view returns a MUX
NavViewItem (as opposed to WUX)
- dd2f3e5 Hookup delete for Profile page navigation:
- missed a spot where we were manually navigating to the Profile
page. So it wasn't hooked up properly
- 9fea6de Properly cast NavViewItem tags
- When we update the NavigationView's menu items, we were casting the
tags to `Model::Profile` instead of `Editor::ProfileViewModel`.
## References
#6800 - Settings UI epic
Fixes the following bug:
> - [ ] JSON change --> crash
> - open SUI --> open JSON --> edit retro effects in JSON --> save file --> cry because the app crashed
## Additional comments
This was a part of some manual testing I performed on the Settings UI.
More intricate bugs are being reported on #6800 and will be fixed in
their own PR.
Fix `TabPaletteItem` to hold only a weak reference to a tab.
This way we guarantee that the refcount of the closed tab
gets to 0 immediately
(and that command palette cannot "raise it from the dead").
While this seems a correct thing to do,
it is still not clear why the `FilteredCommand` itself
(the one holding the `TabPaletteItem`) doesn't get released
until the UI is refreshed.
There is an impact of not registering to PropertyChanged event:
if the tab title changes during Tab Switcher navigation
the Tab Switcher item won't be updated immediately
(the change will apply next time the Tab Switcher is open).
Due to this change we need to make sure that the tabs binding
in https://github.com/microsoft/terminal/pull/8427
doesn't break the title / icon update.
## Validation Steps Performed
* Manual testing
Closes#8651
Fix memory leak that occurs from not dispatching the end of sequences on all actions (since it is buffering up all characters for trace reasons.) Also don't bother storing if no one is listening.
## PR Checklist
- [x] Closes#8283
* [x] Fixes leak found while bumbling around.
* [x] I work here.
## Detailed Description of the Pull Request / Additional comments
- We trace all the things leading up to the Action phase in the VT parser for ETW tracing to make debugging the parser easier, but we made two mistakes.
- At some point, three of the actions (related to print/execute) weren't dispatching the stored up sequence to tracing and not clearing it. So printing/executing in a giant run over and over caused the vector to bloat and bloat and bloat forever.
- We're storing things even when no one is listening. That's a waste.
## Validation Steps Performed
- Watched it grow every time I did `type big.txt` under `taskman.exe`. Then watched it not do that after.
- I did technically WPR it to figure out this was the culprit.
This PR adds support for the ANSI _italic_ graphic rendition attribute,
which is enabled by the `SGR 3` escape sequence.
For the GDI renderer, I've just created an additional italic variant of
the font, and then the `UpdateDrawingBrushes` method selects the
appropriate font variant into the device context based on the requested
text attributes.
It's a bit more complicated in the DX renderer, because we need both an
italic variant of the font, and a variant of the text format object. The
`CustomTextLayout` class also had to be updated to hold the two font and
format instances, and decide which of the variants to use based on a
`useItalicFont` property in the drawing context, initially set in the
`UpdateDrawingBrushes` method.
## Validation Steps Performed
I've created some test content using a range of different character sets
(e.g. CJK, block characters, emoji, etc.), then applied the italic
attribute mixed with various other SGR attributes to see how they
interact. The output isn't always perfect, but I think it seems
reasonable given the constraints of a cell-based terminal renderer.
Closes#5461
This commit introduces direct shortcut dispatch to TerminalPage, which
allows it to respond to key bindings before the command palette.
This allows the user to use shortcuts from the command palette while
it's open.
Closes#6679
Looks like recent regression:
1. Every time the tab gains focus (e.g., upon tab switching) we trigger `TaskbarProgressChanged`
2. This call results in `HideIcon` call
3. This call resets the value of Icon even if hide=false
4. This triggers reload of the image resulting in blinking
This guide serves as a reference on how to add a setting to Windows Terminal. It covers...
- Terminal Settings Model changes
- Settings UI changes
- `TerminalSettings` changes
- Actions and action arguments
As a part of #6800 (Settings UI Follow Up Tasks)
Introduces the following UI controls to the ColorSchemes page:
- "Add new" button
- next to dropdown selector
- adds a new color scheme named ("Color Scheme #" where # is the number of color schemes you have)
- "Rename" Button
- next to the selector
- replaces the ComboBox with a TextBox and the accept/cancel buttons appear
- "Delete" button
- bottom of the page
- opens flyout, when confirmed, deletes the current color scheme and selects another one
This also adds a Delete button to the Profiles page. The Hide checkbox was moved above the Delete button.
## References
#1564 - Settings UI
#6800 - Settings UI Completion Epic
## Detailed Description of the Pull Request / Additional comments
**Color Schemes:**
- Deleting a color scheme selects another one from the list available
- Rename replaces the combobox with a textbox to allow editing
- The Add New button creates a new color scheme named "Color Scheme X" where X is the number of schemes defined
- In-box color schemes cannot be deleted
**Profile:**
- Deleting a profile selects another one from the list available
- the rename button does not exist (yet), because it needs a modification to the NavigationView's Header Template
- The delete button is disabled for in-box profiles (CMD and Windows Powershell) and dynamic profiles
## Validation Steps Performed
**Color Schemes - Add New**
✅ Creates a new color scheme named "Color Scheme X" (X being the number of color schemes)
✅ The new color scheme can be renamed/deleted/modified
**Color Schemes - Rename**
✅ You cannot rename an in-box color scheme
✅ The rename button has a tooltip
✅ Clicking the rename button replaces the combobox with a textbox
✅ Accept --> changes name
✅ Cancel --> does not change the name
✅ accepting/cancelling the rename operation updates the combo box appropriately
**Color Schemes - Delete**
✅ Clicking delete produces a flyout to confirm deletion
✅ Deleting a color scheme removes it from the list and select the one under it
✅ Deleting the last color scheme selects the last available color scheme after it's deleted
✅ In-box color schemes have the delete button disabled, and a disclaimer appears next to it
**Profile- Delete**
✅ Base layer presents a disclaimer at the top, and hides the delete button
✅ Dynamic and in-box profiles disable the delete button and show the appropriate disclaimer next to the disabled button
✅ Clicking delete produces a flyout to confirm deletion
✅ Regular profiles have a delete button that is styled appropriately
✅ Clicking the delete profile button opens a content dialog. Confirmation deletes the profile and navigates to the profile indexed under it (deleting the last one redirects to the last one)
## Demo
Refer to this post [here](https://github.com/microsoft/terminal/pull/8403#issuecomment-747545651.
Confirmation flyout demo: https://github.com/microsoft/terminal/pull/8403#issuecomment-747657842
Merely fixed the capitalization of a word.
## Detailed Description of the Pull Request / Additional comments
- Inside `doc/AddASetting.md`, on line 14, the sentence previously began with the verb "add" with a lowercase alphabet.
- I replaced "add" with "Add".
``` md
[12] ...
[13] 2. Add matching fields to Settings.hpp
[14] - Add getters, setters, the whole drill.
[15] ...
```
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
The tab tooltip is no longer empty when it was toggle zoomed.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#8199
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I was looking at conhost/OpenConsole and noticed it was being pretty
inefficient with allocations due to some usages of std::deque and
std::vector that didn't need to be done quite that way.
So this uses std::vector for the TextBuffer's storage of ROW objects,
which allows one allocation to contiguously reserve space for all the
ROWs - on Desktop this is 9001 ROW objects which means it saves 9000
allocations that the std::deque would have done. Plus it has the
benefit of increasing locality of the ROW objects since deque is going
to chase pointers more often with its data structure.
Then, within each ROW there are CharRow and ATTR_ROW objects that use
std::vector today. This changes them to use Boost's small_vector, which
is a variation of vector that allows for the so-called "small string
optimization." Since we know the typical size of these vectors, we can
pre-reserve the right number of elements directly in the
CharRow/ATTR_ROW instances, avoiding any heap allocations at all for
constructing these objects.
There are a ton of variations on this "small_vector" concept out there
in the world - this one in Boost, LLVM has one called SmallVector,
Electronic Arts' STL has a small_vector, Facebook's folly library has
one...there are a silly number of these out there. But Boost seems like
it's by far the easiest to consume in terms of integration into this
repo, the CI/CD pipeline, licensing, and stuff like that, so I went with
the boost version.
In terms of numbers, I measured the startup path of OpenConsole.exe on
my dev box for Release x64 configuration. My box is an i7-6700k @ 4
Ghz, with 32 GB RAM, not that I think machine config matters much here:
| | Allocation count | Allocated bytes | CPU usage (ms) |
| ------ | ------------------- | ------------------ | -------------- |
| Before | 29,461 | 4,984,640 | 103 |
| After | 2,459 (-91%) | 4,853,931 (-2.6%) | 96 (-7%) |
Along the way, I also fixed a dynamic initializer I happened to spot in
the registry code, and updated some docs.
## Validation Steps Performed
- Ran "runut", "runft" and "runuia" locally and confirmed results are
the same as the main branch
- Profiled the before/after numbers in the Visual Studio profiler, for
the numbers shown in the table
Co-authored-by: Austin Lamb <austinl@microsoft.com>
This commit adds a [progress ring] to the tab header when we receive an
OSC 9 sequence.
Adds an event handler in `Tab.cpp` for the event we raise when we get a
request to set the taskbar state/progress. This event handler updates
the tab header with the active control's state/progress.
When we want to show the progress ring, we hide the tab icon and place
the progress ring over it.
[progress ring]: https://docs.microsoft.com/en-us/uwp/api/Microsoft.UI.Xaml.Controls.ProgressRing?view=winui-2.4
References #6700
This commit introduces another optional text block in palette that will
be shown in the command line mode (above the history). This text block
will either contain a list of parsed command lines or a description why
the parsing failed
Closes#8344Closes#7284
N
* Change backslashes in include statements to forward slashes (CC-8205)
Dustin L. Howett
* Refactor DEC/ANSI modes to avoid duplication when we add SM/RM (GH-8469)
* Fix the xterm and SGR mouse encodings for CTRL, ALT, SHIFT (GH-8379)
James Holderness
* Fix rendering of DBCS characters when partially off screen (CC-8438)
* Correct horizontal coordinates in viewport overflow test (CC-8456)
* Correct paths in the the runut and runft test scripts (CC-8488)
* Retain horizontal viewport offset when moving to bottom (CC-8434)
* Fix out-of-bounds exceptions in Set...{Buffer,Screen}Size (CC-8309)
PankajBhojwani (1)
* Implement ConEmu's OSC 9;4 to set the taskbar progress indicator (CC-8055)
Chester Liu (1)
* Improve OSC 8 Hyperlink parsing logic (CC-7962)
Related work items: #31090459, #31090805, #31090808, #31090810
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 91dff13f6953441afe9e28bfe3da9d5bff27bb05
Related: MSFT-26196390
Related work items: #26196390
This commit replaces DeviceComm with the interface IDeviceComm and the
concrete implementation type ConDrvDeviceComm. This work is done in
preparation for different device backends.
In addition to separating out ConDrv-specific behavior, I've introduced
a "handle exchange" interface.
HANDLE EXCHANGE
---------------
There are points where we give ConDrv opaque handle identifiers to our
input buffer, output buffer and process data. The exact content of the
opaque identifier is meaningless to ConDrv: the driver's only
interaction with these identifiers is to hold onto them and send back
whichever are pertinent for each API call.
Because of that, we used the raw register-width pointer value of the
input buffer, output buffer or process data _as_ the opaque handle
value.
This works very well for ConDrv <-> conhost using the ConDrvDeviceComm.
It works less well for something like the "logging" DeviceComm that will
log packets to a file: those packets *cannot* contain pointer values (!)
To address this, and to afford flexibility to DeviceComm implementers,
I've introduced a two-member complement of handle management functions:
* `ULONG_PTR PutHandle(void*)` registers an object with the DeviceComm
and returns an opaque identifier.
* `void* GetHandle(ULONG_PTR)` takes an opaque identifier and returns
the original object.
ConDrvDeviceComm implements PutHandle and GetHandle by casting the
object pointer to the "opaque handle value", which maintains wire format
compatibility[1] with revisions of conhost prior to this change.
Simpler DeviceComm implementations that require handle tracking but
cannot bear raw pointers can implement these functions by returning an
autoincrementing ID (or similar) and registering the raw object pointer
in a mapping.
I've audited all existing handle exchanges with the driver and updated
them to use Put/GetHandle.
(I intended to add DestroyHandle, but we are not equipped for handle
removal at the moment. ConsoleHandleData/ConsoleProcessHandle are
destroyed during wait routine completion, on client disconnect, etc.
This does mean that an id<->pointer mapping will grow without bound, but
at a cost of ~8 bytes per entry and a short-lived console session I am
not too concerned about the cost.)
[1] Wire format compatibility is not required, and later we may want to
switch ConDrvDeviceComm to `EncodePointer` and `DecodePointer` just to
insulate us against a spurious ConDrv packet allowing for an arbitrary
4/8-byte read and subsequent liftoff into space.
Co-authored-by: mrange <marten_range@hotmail.com>
I loved the pixel shaders in #7058, but that PR needed a bit of polish
to be ready for ingestion. This PR is almost _exactly_ that PR, with
some small changes.
* It adds a new pre-profile setting `"experimental.pixelShaderPath"`,
which lets the user set a pixel shader to use with the Terminal.
- CHANGED FROM #7058: It does _not_ add any built-in shaders.
- CHANGED FROM #7058: it will _override_
`experimental.retroTerminalEffect`
* It adds a bunch of sample shaders in `samples/shaders`. Included:
- A NOP shader as a base to build from.
- An "invert" shader that inverts the colors, as a simple example
- An "grayscale" shader that converts all colors to grayscale, as a
simple example
- An "raster bars" shader that draws some colored bars on the screen
with a drop shadow, as a more involved example
- The original retro terminal effects, as a more involved example
- It also includes a broken shader, as an example of what heppens
when the shader fails to compile
- CHANGED FROM #7058: It does _not_ add the "retroII" shader we were
all worried about.
* When a shader fails to be found or fails to compile, we'll display an
error dialog to the user with a relevant error message.
- CHANGED FROM #7058: Originally, #7058 would display "error bars"
on the screen. I've removed that, and had the Terminal disable the
shader entirely then.
* Renames the `toggleRetroEffect` action to `toggleShaderEffect`.
(`toggleRetroEffect` is now an alias to `toggleShaderEffect`). This
action will turn the shader OR the retro effects on/off.
`toggleShaderEffect` works the way you'd expect it to, but the mental
math on _how_ is a little weird. The logic is basically:
```
useShader = shaderEffectsEnabled ?
(pixelShaderProvided ?
pixelShader :
(retroEffectEnabled ?
retroEffect : null
)
) :
null
```
and `toggleShaderEffect` toggles `shaderEffectsEnabled`.
* If you've got both a shader and retro enabled, `toggleShaderEffect`
will toggle between the shader on/off.
* If you've got a shader and retro disabled, `toggleShaderEffect` will
toggle between the shader on/off.
References #6191
References #7058Closes#7013Closes#3930 "Add setting to retro terminal shader to control blur
radius, color"
Closes#3929 "Add setting to retro terminal shader to enable drawing
scanlines"
- At this point, just roll your own version of the shader.
There are two issue with copy to clipboard when block is selected:
* We don't add new lines for lines that were wrapped
* We remove trailing whitespaces which is not intuitive in block selection.
Fixed the copy logic to always add newlines and not to remove
whitespaces when block is selected.
Even if shift is pressed!
## Detailed Description of the Pull Request / Additional comments
* Added optional parameter to `TextBuffer::GetText`
that allows to apply formatting (includeCRLF / trimming)
to lines that were wrapped
* Changed `Terminal::RetrieveSelectedTextFromBuffer`
to apply the following parameters when block is selected:
* includeCRLF = true
* trimTrailingWhitespaces = false
* apply the formatting above to all rows, including the ones
that were wrapped
## Validation Steps Performed
* Manual tests for both block and standard selection
* Copy with both right-click and command
* Added UT
Closes#6740
In conhost there is a keyboard shortcut that applies colors to the
selected range of text, and another shortcut that searches for the
selected text, and applies colors to any matching content. The former
operation doesn't work correctly when the selection is wrapped, and both
have problems when the selected text spans DBCS characters. This PR
attempts to fix those issues.
The problem with the color section was that it applied the color to a
simple rect spanning the start and end points of the selection. I've now
updated it to use the `Selection::GetSelectionRects` method, which
correctly handles a wrapped range of lines, and makes sure that double
width characters are fully covered.
The problem with the "find-and-color" operation was in the way it
obtained the search text from the selected screen cells. Since it
retrieved one cell at a time, and a DBCS character can span two cells,
that resulted in some characters being repeated in the search text. I've
now corrected that code to take the width of the characters into
account.
## Validation Steps Performed
I've manually verified that the test cases described in #8572 and #8574
are now working correctly.
Closes#8572Closes#8574
This changes the keyboard warning from a dialog to an `InfoBar`, which
we just got in MUX 2.5. Some users were unhappy that we'd always display
the dialog. We learned from the input team that this service _should_
always be enabled. We're also learing from users that they don't always
want it enabled.
We're working with the Input team to help us figure out how this service
can be disabled _and the Terminal work just fine_. They're confident
that it _shouldn't_. For 99% of our users, they're right. So we don't
want to get rid of the dialog entirely, we want to understand how this
is possible. While we wait, let's make the message less aggressive.
This is instead of making a `iKnowWhatImDoingDisableTheKeyboardWarning`
setting to disable the dialog. Props to @cornem for suggesting the less
aggressive solution.
## Validation Steps Performed
Tested manually, but by forcing the message to always display. Disabling
the service requires two full reboots, and _ain't nobody got time for
that_.
Closes#8228Closes#4448, for now
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
It is maybe not the best way since I had to get all the cases for key handling so I just created for each of them. As a result the code get longer(not optimized). Most difficult thing was Next tab and Previous tab I just could not solve it.
### 9 commands that couldn't enabled > <
1. Increase font size -> could not find VirtualKey for "-"
2. Decrease font size -> could not find VirtualKey for "+"
3. Split pane, split:horizontal -> could not find VirtualKey for "-"
4. Split pane, split:vertical -> could not find VirtualKey for "+"
5. Open default settings -> could not find VirtualKey for ","
6. Open settings file -> could not find VirtualKey for ","
7. Open new tab dropdown -> could not resolve keybindings
8. Next tab -> could not resolve keybindings
9. Previous tab -> could not resolve keybindings
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6679
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This commit iontroduces another `target` to the `openSettings` binding:
`settingsUI`. It opens the settings UI introduced in the previous
commit.
Closes#1564Closes#8048 (PR)
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Leon Liang <lelian@microsoft.com>
This commit introduces the terminal settings editor (to wit: the
Settings UI) as a standalone project. This project, and this commit, is
the result of two and a half months of work.
TSE started as a hackathon project in the Microsoft 2020 Hackathon, and
from there it's grown to be a bona-fide graphical settings editor.
There is a lot of xaml data binding in here, a number of views and a
number of view models, and a bunch of paradigms that we've been
reviewing and testing out and designing and refining.
Specified in #6720, #8269
Follow-up work in #6800Closes#1564Closes#8048 (PR)
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Kayla Cinnamon <cinnamon@microsoft.com>
Co-authored-by: Alberto Medina Gutierrez <almedina@microsoft.com>
Co-authored-by: John Grandle <jograndl@microsoft.com>
Co-authored-by: xerootg <xerootg@users.noreply.github.com>
Co-authored-by: Scott <sarmiger1@gmail.com>
Co-authored-by: Vineeth Thomas Alex <vineeththomasalex@gmail.com>
Co-authored-by: Leon Liang <lelian@microsoft.com>
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Signed-off-by: Dustin L. Howett <duhowett@microsoft.com>
This commit is an amalgamation of some of the TSM changes in PR #8048.
It:
* Introduces CascadiaSettings.CreateNewProfile to add a new profile
* Introduces CascadiaSettings.ProfileDefaults, which returns the
"defaults" object as a profile
* Fixes the font weight deserializer to work on uint16_ts
* Fixes a property getter in ColorScheme to not be a property getter
* Fixes a reserialization error with default profiles
* Sets a default icon for all profiles (to the C:\ Segoe MDL2 icon)
This PR defines a series of `NOSOMETHING` macros in PCHs, in order to
prevent `windows.h` from bringing a lot of rarely used things into the
project.
Theoretically this should make PCH generation and overall complication
faster, but I didn't really benchmark the speed.
Another benefit would be reducing the symbol noises caused by
`windows.h`.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/7916
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Upon tab close the tabview is responsible to issue tab selection for the next active tab.
However this doesn't happen when tabview is hidden.
There was a special treatment for this scenario for full screen mode.
Added the same treatment to focus mode (as the tabview is not visible in this case as well).
## Validation Steps Performed
Manual tests
Adds a "move to previous pane" and "move to next pane" keybinding, which
navigates to the last/first focused pane
We assign pane IDs on creation and maintain a vector of active pane IDs
in MRU order. Navigating panes by MRU then requires specifying which
pane ID we want to focus.
From our offline discussion (thanks @zadjii-msft for the concise
description):
> For the record, the full spec I'm imagining is:
>
> { command": { "action": "focus(Next|Prev)Pane", "order": "inOrder"|"mru", "useSwitcher": true|false } },
>
> and order defaults to mru, and useSwitcher will default to true, when
> there is a switcher. So
>
> { command": { "action": "focusNextPane" } },
> { command": { "action": "focusNextPane", "order": "mru" } },
>
> these are the same action. (but right now we don't support the order
> param)
>
> Then there'll be another PR for "focusPane(target=id)"
>
> Then a third PR for "focus(Next|Prev)Pane(order=inOrder)"
> for the record, I prefer this approach over the "one action to rule
> them all" version with both target and order/direction as params,
> because I don't like the confusion of what happens if there's both
> target and order/direction provided.
References #1000Closes#2871
I added `enum class` to one thing and decided that that was quite enough
before disabling the `enum class` warning.
Looks like 16.8 made more map/vector operations noexcept, so we have to
re-annotate to remain compliant.
There's a handful of small changes in these updates:
The Win32 Toolkit is now built with CFG (I think), and
the VCRT forwarders are now the (second) non-RC version.
First step towards #8415:
* Introduce `PaletteItem` and derive from it to provide native support
for tabs and command lines (`ActionPaletteItem` / `TabPaletteItem`,
`CommandLinePaltteItem`)
* Remove business logic behind PaletteItem from palette (aka dispatch
commands and preview tabs externally)
So the implementation is somewhat dirty.
The ideas was nice - add lostFocusHandler
However it broke few things:
* In the TabSwitcher the ListItem must be focusable since otherwise
the SingleSelectionMode behavior breaks.
To address this I had to put the lostFocusHandler on the items as well
* When you click the flyout, the palette loses focus,
which makes the terminal page to set the focus on the tab, closing the flyout.
To address this I had to ensure the tab won't get focused once the flyout is open.
In addition, flyout should fix the focus before opening,
otherwise alt+tab will put a focus on a tab row rather than on tab
* I also had to close the palette if the tab order changes.
To prevent inconsistencies.
Closes#8355
A bunch of our feature tests don't work reliably in CI. They rely on
creating a new `OpenConsole.exe` window, then running the test _in that
console_. As a part of that test setup, the test runner used to wait a
second to attach to the newly created console. Then the test goes on
it's merry way, assuming the console is ready to go. However, in CI,
that might take more than a second. If it does, then the test would fail
pretty immediately, as soon as it tries to get at the buffer of the new
console.
This PR introduces a little retry loop to the test init. After attaching
to the new console, we'll try and get at the screen buffer. If that
fails, we'll wait a second and try again. We'll try 5 times total,
before bailing entirely. Hopefully, this should mitigate most of the
random CI failures we get in the feature tests.
Closes#8495
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR adds shortcut action so that users can scroll.
I used `UINT16_MAX` for `rowsToScroll`.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7542
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
In my #8489 we want to use boost's small_vector type, but that PR is
kinda messy by adding boost and also making a meaningful change. So
here I'm splitting out the boost addition to its own PR so that one can
be more focused on the allocation improvement and consumption of boost.
Have you ever wanted to debug the Terminal, but weren't sure which of
your Terminal windows was the one you needed to attach to? Now you don't
need to worry! Simply execute the `breakIntoDebugger` action, and the
Terminal will `DebugBreak()` for you!
This requires that the user has set `"debugFeatures": true`
Validated by adding a command:
{
"command": "breakIntoDebugger",
"keys": "ctrl+alt+shift+f1",
"name": "DebugBreak()"
},
...and verifying that it pops open the post-mortem debugger (windbg).
This commit moves us to the Xaml prerelease (201202003) that is
equivalent to public stable release 2.5.
Remember, we need to use prereleases for some silly reason.
There were some minor annoyances with the WPF projects.
1. WpfTerminalTestNetCore was in an unnecessary same-named subdirectory
2. The build started throwing deprecation warnings because `netcoreapp3.0` is not LTS and is going away.
This is the same root cause as #8485. We moved the output of a bunch
of projects to be unified. We forgot to update all the test scripts.
In this case, the LocalTests were still using the old path that's
_not_ under `bin/`
When the renderer is called on to render part of a line starting halfway
through a DBCS character (as can occur in conhost when the viewport is
offset horizontally), it could result in the character not being
displayed, and/or with following the characters drawn in the wrong
place. This PR is an attempt to fix those problems.
The original code for handling the trailing half of fullwidth glyphs was
introduced in PR #4668 to fix issue #2191.
When the content being rendered starts with the trailing half of a DBCS
character, the renderer tries to move the `screenPoint` back a position,
so it can instead render the full character, but instructing the render
engine to trim off the left half of it.
If the X position was already in column 0, though, it would instead move
forward one position, intending to skip that character. At best this
would mean the half character wouldn't be rendered, but since the
iterator wasn't incremented correctly, it actually just ended up
rendering the character in the wrong place.
The fix for this was simply to drop the check for the X position being
in column 0, and allow it go negative. The rendering engine would then
just start rendering the character partially off screen, and only the
second half of it would be displayed, which is exactly what is needed.
The second problem was that the code incrementing the iterator was using
the `columnCount` variable rather than the `it->Columns()` value for the
current position. When dealing with the trailing half of a DBCS
character, the `columnCount` is 2, but the `Columns()` value is 1. If
you use the former rather than the later, then the renderer may skip the
following character.
## Validation Steps Performed
I've developed a more easily reproducible version of the test case
described in #8390, and confirmed that the problem no longer occurs when
this PR is applied.
I've also manually confirmed that the problem described in #2191 that
was fixed by PR #4668 is still working correctly now.
Closes#8390
When resizing the buffer in the `SetConsoleScreenBufferSize` and
`SetConsoleScreenBufferInfoEx` APIs, we have tests in place to make sure
that the resize doesn't result in the viewport extending past the bottom
or right of the buffer (since that can eventually result in exceptions
being thrown). Unfortunately these tests were using the wrong X
coordinate, so they failed to detect an overflow along the horizontal
axis. This PR corrects that mistake.
PR #8309 was where the overflow detection was initially added.
The original code was using the `Viewport::EndExclusive` method to
determine the extent of the viewport, mistakenly thinking that it
returned the bottom right coordinates (it actually returns the left
coordinate). So I've now added a `BottomRightExclusive` method to the
`Viewport` class, that actually does return the coordinates we need, and
have updated the overflow tests to use that method instead.
## Validation Steps Performed
I've manually confirmed that the test case is issue #8453 is no longer
throwing an exception.
Closes#8453
I was about to add `SetAnsiMode`/`ResetAnsiMode` for `SM` and `RM` when I
realized that we probably don't need yet another enum of mode types, set and
reset functions, and a mode helper for ANSI standard modes when we already have
one for DEC Private modes.
This commit:
1. Changes the enum `PrivateModeParams` to just be `ModeParams`
2. Differentiates ANSI Standard modes (IRM, KAM, SRM, ...) from DEC
Private modes (DECCOLM, DECCKM, ...) using a flag bit set in the enum
value.
3. Introduces a helper class for constructing these values much like
`VTID`. That helper takes a bitmask and applies it to an input to
produce the final enum value.
4. Dispatches all mode set/reset through a common Set/Reset and
`_ModeHelper` that uses the existing enum values.
[1] These modes are in separate namespaces with some overlap. We want to
differentiate them at dispatch time to ensure that `\e[2h` and `\e[?2h` are
given different treatment, and ensure that `\e[1000h` doesn't activate xterm
mouse mode.
Fixes#8457.
This corrects the path to `Terminal.Core.Unit.Tests.dll` in the `runut`
unit test script and makes the `runft` feature test script capable of
working with _Release_ builds as well as _Debug_ builds.
The path to `Terminal.Core.Unit.Tests.dll` changed when the project was
restructured, and the `runut` script was never updated to reflect that
change. That has now been corrected.
And the `runft` script used to be hard coded to look for tests in the
_Debug_ directory, but it has now been updated to use the
`%_LAST_BUILD_CONF%` environment variable, so it should work for both
_Debug_ and _Release_ builds.
## Validation Steps Performed
I've manually confirmed that the `runut` and `runft` scripts now work as
expected.
Closes#8485
This PR improves the clipboard handling logic of "drag and drop" in
TermControl, making it more useful and less likely to crash.
* Added support for two more categories of content, `ApplicationLink`
and `WebLink`.
* Reordered the ifs, making `StorageItem` the last clause. With WT being
a text-oriented application, I think we can safely assume that the
content being pasted is likely to be text/links.
* Catch possible exceptions during
`e.DataView().GetStorageItemsAsync()`.
Closes#7804
`backgroundImageAlignment` is exposed as 1 setting in the JSON, but
stored as two separate settings (`HorizontalAlignment` and
`VerticalAlignment`). This PR introduces `ConvergedAlignment` as a flag
enum that can be a combination of horizontal and vertical Alignments.
TSM now solely uses this `ConvergedAlignment`, and TerminalSettings
performs a conversion from this new enum to the traditional
`HorizontalAlignment` and `VerticalAlignment` for consumption.
## Validation Steps Performed
Manually tested changing the `backgroundImageAlignment` in my
settings.json and checking if the image updated appropriately.
Show a validation warning when someone sets a `setColorScheme` action
with an invalid scheme
In the setting validation phase, scan all commands for all the "set
color scheme" actions, and check each of them has a valid scheme. If any
of them has an invalid scheme name, raise a warning. Do not check
iterable commands that will be expanded to valid color schemes.
## Validation Steps Performed
- Added tests to LocalTests_SettingsModel
- Manual tests, add commands to settings.json with invalid color scheme
and check the warning pops up. Try simple and nested commands.
Closes#7221
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8421
* [x] CLA signed.
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
Skip further computations if:
* The list is empty
* No item is selected and we press "up" key
(we do want to handle "down" key for CommandLineMode)
## Validation Steps Performed
* Manual testing + UT
## Summary of the Pull Request
I think we all agree that the current spec template doesn't always work. I
thought this layout might be better for the kinds of settings discussions we
have (more and more frequently now).
This is largely for discussion with the team - if there are other things we want
added, changed, or if we just want to merge this in with the primary spec
template, I'm all ears.
## References
* An example of using this spec: #8375
The Settings UI exposes the `profiles.defaults` (PD) object. Today, we
remove PD if there's nothing in it. However, that causes problems with
the Settings UI, because we have no `Profile` object to bind to
(resulting in a crash). Rather than making the Settings UI create a PD,
and link it in the inheritance tree, it's much easier to just _always_
create and link the PD object.
## References
#1564 - Settings UI (fixes a crash for this)
#7923 - Introduces inheritance
## PR Checklist
* [X] Tests added/passed
## Validation Steps Performed
* [x] repro steps for crash in Settings UI (copied changes over to that
branch for testing)
* [x] tests passed
This fixes the issue with the settings UI where clicking the browse
buttons would cause an exception to be thrown when we tried to display a
picker without an originating HWND.
It turns out that pickers need a hosting/parent window, and Xaml Islands
doesn't furnish us with a CoreWindow that's set up for that use case.
Alas!
Raymond Chen's [blog post on the matter] suggests that we should
hand the HWND off through some classic COM interface. To do that
properly, Terminal's various components need to implement that interface
and propagate the HWND down where it's needed.
Thanks to a [Xaml compiler issue], we can't actually do that. To work
around that, we've begged and borrowed different methods for pushing
HWNDs around:
1. Using IInitializeWithWindow in secret
2. A member that takes a uint64
3. An interface that offers a function that will "wire up" the HWND.
I chose (1) because AppHost can implement IInitializeWithWindow, but
TerminalPage cannot. We're just pretending that TerminalPage _can_.
I chose (2) because none of the Xaml types in TerminalSettingsEditor can
implement the interface thanks to the aforementioned compiler issue, but
we don't have an escape hatch like AppHost that lives in the same module
and can help us do the propagation.
I chose (3) because I didn't want to commit the same sin as (2) _seven
times_ for every different type of settings page that exists. (3) is
backed by "IHostedInWindow", and anybody who knows they have to use
IInitializeWithWindow to tie an HWND to an object can call
IHostedInWindow.TryPropagateHostingWindow() on that object.
House of cards.
[Xaml compiler issue]: https://github.com/microsoft/microsoft-ui-xaml/issues/3331
[blog post on the matter]: https://devblogs.microsoft.com/oldnewthing/20190412-00/?p=102413
(cherry picked from commit f9fc9861a1)
When the viewport is moved to the "virtual bottom" of the buffer (via
the `MoveToBottom` method), it is important that the horizontal viewport
offset be left as it is, otherwise that can result in some undesirable
side effects.
Since the VT coordinate system is relative to the top of the viewport,
many VT operations call the `MoveToBottom` method to make sure the
viewport is correctly positioned before proceeding. There is no need for
the horizontal position to be adjusted, though, since the X coordinates
are not constrained by the viewport, but are instead relative to the
underlying buffer.
Setting the viewport X coordinate to 0 in `MoveToBottom` (as we were
previously doing) could result in the cursor being pushed off screen.
And if the operation itself was moving the cursor, that would then
trigger another viewport move to bring the cursor back into view. These
conflicting movements meant the viewport was always forced as far left
as possible, and could also result in cursor "droppings" as the cursor
lost track of where it had been.
I've now fixed this by updating the `GetVirtualViewport` method to match
the horizontal offset of the active viewport, instead of having the X
coordinate hardcoded to 0.
## Validation Steps Performed
I've manually confirmed that this fixes the cursor "droppings" test case
reported in issue #8213.
I've also added a screen buffer test that makes sure the `MoveToBottom`
method is working as expected, and not changing the horizontal viewport
offset when it moves down.
Closes#8213
If we try set a very long title, "rename box" UI changes max height,
corrupting the layout. There are several ways to fix it, e.g. by
limiting the MaxHeight (e.g. by binding it to the actual height of the
title bar).
However, I went for the most straightforward approach - truncating. I
don't think we should allow long titles (though it can be a nice hidden
storage 😊)
I considered to truncate it to the tab header width, but we can actually
see more data in tab-switcher, so I simply went for a hard-coded value
which should be large enough.
If this approach makes sense we need to consider updating the
documentation.
Closes#8428
We had the xterm and SGR codings for meta/ctrl backwards. Oops.
This commit also fixes an observed issue in Windows Terminal where we
were passing in a console-style modifiers enum when MouseInput is
expecting MK_ constants.
I decided to unify MouseInput around the console-style modifier
constants because they have support for META (which MK_ does not) and
can differentiate between left/right alt/ctrl.
Our tests are fundamentally flawed here: they use a copy of the
modifier key generating logic _themselves_, so we got a bit of "error
carried forward."
I did not fix the tests to use known-good control sequences, I simply
replaced the character generator with another copy of the modifier code.
I did, however, extend them to test ctrl|meta and left/right modifiers.
Fixes#8291
Fix for #8365
Adds a `_renameCancelled` bool that determines whether we raise the event for a title change. We do this because the lost focus handler for the rename box will be called _both_ when the renamer is dismissed by clicking somewhere else and by pressing enter/escape. So, the lost focus handler needs to conditionally raise the event.
Closes#8365
## Summary of the Pull Request
Introduces a new command called `moveTab`
This command has a single mandatory argument with values of `forward` and `backward`
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/3593
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated here: https://github.com/MicrosoftDocs/terminal/pull/198
* [x] Schema updated
* [x] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Went for the straightforward solution of moving the tab and the tabViewItem.
## Validation Steps Performed
* Manual testing
Many include statements use forward slashes, while others use backwards
slashes. This is inconsistent formatting. For this reason, I changed the
backward slashes to forward slashes since that is the standard.
## Summary of the Pull Request
Add a history to command palette in the command line mode.
Few considerations/limitations
1. In-memory, 10 entries hard-coded
2. MRU
3. List rather than set
4. The user needs explicitly select command from the history
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8296
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated - irrelevant
* [ ] Schema updated - irrelevant
* [ ] I've discussed this with core contributors already.
## Validation Steps Performed
* Manual testing
The CloseWarningDialog is now "awaitable"/async, as suggested in PR #7871.
As opening the dialog is async, the flag can be reset in the same
method. This way the flag operations occur in the same method. The
event handlers of the buttons became obsolete and are removed.
## Validation Steps Performed
Tested manually.
## Summary of the Pull Request
Does what the title says. Now while you're building terminal projects,
the taskbar will show indeterminate progress. If the build fails, it'll
blink the error state for 500ms before returning to normal.
## References
* Made possible by #8055 _and viewers like you_
## PR Checklist
* [x] scratches an itch I've had since at least 2018
* [x] I work here
* [x] this is a build script
## Validation Steps Performed
tested manually
* Add a tabColor parameter to the `new-tab` and `split-panes` command
* Add --tabColor to the command line, to allow bootstrapping with tabs
of different colors
Add another field to NewTerminalArgs. Use this field to set
StartingTabColor in Terminal. This color gets overridden by the color
defined by the profile / VT, however can be overridden with the color
picker.
Since the color is the property of the Terminal, when defined for the
tab this color is associated only with the first pane/terminal of the
tab. Additional panes will not inherit this color (to prevent advanced
resolution, where we need to resolve between the inherited color and the
one specified for the pane).
## Validation Steps Performed
* UT for parameters parsing
* Running system with several tabs of different colors.
* Adding custom actions with colors
* Performing operations like split pane, duplicate and so on
Closes#8075
One of our test files has some raw Emoji in it. I expect that as time
goes by, more and more files will have UTF-8 in them.
Fixes MSFT-30289536
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp d828ae0f6c209259019934711c587ea075eab77e
[Git2Git] Git Train: Merge of building/rs_onecore_dep_uxp/201117-2002 into official/rs_onecore_dep_uxp Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 526043ab6050397506b3cdb77e6a43b5ca9a2e9a
Related work items: MSFT-29990377
The terminal taskbar icon can now flash when the BEL sequence is
emitted, to let the user know something needs their attention.
The `BellStyle` setting can now be set to `audible`, `visual` or both or
none. When the pane receives a BEL event and the `bellStyle` includes
`visual`, we bubble the event up all the way to `AppHost` to handle
flashing the taskbar.
Closes#1608
This commit implements the OSC 9;4 sequence per the [ConEmu style].
| sequence | description |
| ------------ | ------------ |
| `ESC ] 9 ; 4 ; st ; pr ST` | Set progress state on taskbar and tab. |
| | When `st` is: |
| | |
| | `0`: remove progress. |
| | `1`: set progress value to `pr` (number, 0-100). |
| | `2`: set the taskbar to the "Error" state |
| | `3`: set the taskbar to the "Indeterminate" state |
| | `4`: set the taskbar to the "Warning" state |
We've also extended this with:
* st 3: set indeterminate state
* st 4: set paused state
We handle multiple tabs sending the sequence by using the the last focused
control's taskbar state/progress.
Upon receiving the sequence in `TerminalApi`, we send an event that gets caught
by `TerminalPage`. `TerminalPage` then fires another event that gets caught by
`AppHost` and that's where we set the taskbar progress.
Closes#3004
[ConEmu style]: https://conemu.github.io/en/AnsiEscapeCodes.html#ConEmu_specific_OSC
Currently when implicit tab command is specified (i.e., we have
parameters for new-tab, but don't have the explicit subcommand name) we
fallback to parsing the entire arg list as new tab command.
However, if we also have a launch profile (or anything else that might in
the future belong to the upper scope) it is passed as a parameter to the
new tab command, failing the parsing.
The idea behind my solution is to run the parser as a prefix command -
i.e., as long as we succeed to parse [options] / [subcommand] we will
parse them (populating the fields like a launch mode), but once we will
discover something unfamiliar, like profile, we will know that the
prefix is over and will handle the remaining suffix as a new tab
command.
## Validation Steps Performed
* UT added
* Manual run of different options
Closes#7318
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This sets the tab close button color to match the tab text color.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#8046
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#8046
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8046
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
This sets the tab close button color to match the tab text color.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Test light theme white tab mouse hover effect:
Test dark theme white tab mouse hover effect:
This fixes a number of exceptions that can cause conhost to crash when
the buffer is resized in such a way that the viewport or cursor position
end up out of bounds.
Technically this is a fix for issue #256, although that has been closed
as "needs-repro".
The main fix was to add checks in the `SetConsoleScreenBufferSizeImpl`
and `SetConsoleScreenBufferInfoExImpl` methods, to make sure the
viewport doesn't extend past the bottom or right of the buffer after a
resize. If it has overflowed, we move the viewport back up or left until
it's back within the buffer boundaries. We also check if the cursor
position has ended up out of bounds, and if so, clamp it back inside the
buffer.
The `SCREEN_INFORMATION::SetViewport` was also a source of viewport
overflow problems, because it was mistakenly using inclusive coordinates
in its range checks, which resulted in them being off by one. That has
now been corrected to use exclusive coordinates.
Finally, the `IsCursorDoubleWidth` method was incorrectly marked as
`noexcept`, which was preventing its exceptions from being caught.
Ideally it shouldn't be throwing exceptions at all any more, but I've
removed the `noexcept` specifier, so if it does throw an exception,
it'll at least have more chance of recovering without a crash.
## Validation Steps Performed
I put together a few test cases (based on the reports in issues #276 and
#1976) which consistently caused conhost to crash, or to generate an
exception visible in the debug output. With this PR applied, those test
cases are no longer crashing or triggering exceptions.
Closes#1976
## Summary of the Pull Request
This adds `ToJson` functions to `Profile`, `GlobalAppSettings`, and `ColorScheme`. They are used in `CascadiaSettings` to completely serialize an instance of the settings model. Thanks to #7923, all of the settings are `std::optional`, and `JsonUtils` only writes out values that are actually populated.
`CascadiaSettings::WriteSettingsToDisk` serializes the current settings and writes them to the settings.json. A backup file is created with your old contents.
#### Limitations:
- all of the color schemes are serialized regardless of them coming from defaults.json or settings.json
- keybindings/actions are copied/pasted
## References
#1564 - Settings UI
TSM Specs (#6904 and #7876)
## PR Checklist
* [x] Tests added/passed
Fixes the clear button to clear the typed command not clickable in the
command palette.
- From the primary investigation it looked like the `TextBlock` element
introduced in #7935 was somehow blocking (appearing on top of) the
clear button.
- It was also blocking the command palette input field from being able
to access which was preventing the text in the input field from being
selected and the cursor would still show as `pointer` cursor instead
of a `text selection` cursor
- Adding `HorizontalAlignment="Left"` property to the above-mentioned
`TextBlock` element fixed the issue.
## Validation Steps Performed
- Created the Dev build for `x64` in Visual Studio and verified the
functionality manually.
Closes#8220
Some sources files changes were necessary to retain build continuity in OS.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 7ff895ff770838526b6d1d9e7d582f3c1e36d85b
Fixes https parsing of the latest version of `profiles.schema.json`, particularly by VS Code Intellisense.
* [x] Closes#8249
The VS Code parsing warning below is a known and unrelated existing issue due to VS Code only supporting JSON Schema Draft 7. It does not prevent Intellisense from functioning.
> Draft 2019-09 schemas are not yet fully supported.
## Validation Steps Performed
Manually tested and successfully validated by fixing a local copy of `profiles.schema.json` and defining it as `$schema` in `settings.json`
conhost and windows terminal
renamed files; updated script to do summary output only, also quiet mode and option file path for output (else stdout)
added -quiet and fixed -summaryonly parameters
added hyperlink directly to soruce implementation for conhost and terminal seqs
Update doc/reference/master-sequence-list.csv
Co-Authored-By: James Holderness <j4_james@hotmail.com>
Apply suggestions from code review
Co-Authored-By: James Holderness <j4_james@hotmail.com>
Co-authored-by: James Holderness <j4_james@hotmail.com>
Until now, we relied on WM_SIZING to ensure that the island is not
downsized below minimal allowed dimensions. However, on some occasions
WM_WINDOWPOSCHANGED, e.g. when anchoring a window to the top/bottom of
the screen. This message will use dimensions obtained from
WM_GETMINMAXINFO. Until now we didn't override this value, falling back
to the defaults. As a result we got an inconsistent behavior (at least
when attaching the anchor).
I added logic very similar to the one we use in IslandWindow::_OnSizing
to the MINMAXINFO handler: snap the client area, add non client
exclusive are, consider DPI along the computation.
## Validation Steps Performed
* Manual testing of minimizing, maximizing, resizing, attaching
different anchors, etc.
Closes#8026
There are two code paths for Ctrl+Tab and for everything else:
Ctrl + Tab is working perfectly
* On the first tab navigation TerminalPage::_SelectNextTab resets the
tab commands, and since palette is not visible selects the relevant
tab index
* On the second navigation Ctrl+Tab is intercepted by
CommandPalette::_previewKeyDownHandler and everything works fine
But with custom binding things are screwed:
* On the first tab navigation TerminalPage::_SelectNextTab resets the
tab commands, and since palette is not visible selects the relevant
tab index
* On the second navigation keys are not intercepted and thus
TerminalPage::_SelectNextTab is called again. It resets the commands,
but now since the palette is visible we simply invoke
CommandPalette::SelectNextItem. Which in turn misbehaves because no
item is selected.
The approach for the solution is not to reset anything if the command
palette is already open.
## Validation Steps Performed
* Manual testing of both custom and non-custom bindings with different
amount of tabs.
Closes#8247
* Run all images through ImgBot (CC-8169)
* Fix potential over/underflow as noted by "TODO:" comment (CC-8081)
* Fix garbling when copying multibyte text via OSC 52 (CC-7870)
* UIA: throw E_FAIL for out-of-bounds text (CC-8052)
* Consider the GlyphWidth when calculate the postion of matched word in URL detecting (CC-8124)
* Make the link underline less obtrusive; don't use it for pattern (GH-8148)
* Fully regenerate CodepointWidthDetector from Unicode 13.0 (GH-8035)
* Prepare for the primary branch name to change to main (GH-7985)
* Hash the URI as part of the hyperlink ID (GH-7940)
* Introduce til::presorted_static_map (GH-7640)
* Prevent leftover cursor fragments when scrolling in PowerShell (CC-8173)
* Add support for the DECREQTPARM report (CC-7939)
* Refactor VT parameter handling (CC-7799)
* Add support for the "blink" graphic rendition attribute (CC-7490)
* Combine the parsing & dispatch blocks for OSC actions (CC-8202)
* Add support for autodetecting URLs and making hyperlinks (CC-7691)
* Copy _currentHyperlinkId when copying the buffer (CC-8074)
* Fix the "visual representation" optimization for hyperlinks (CC-7738)
* Optimize the binary size of the XOrg color table (CC-7929)
* Add support for more OSC color formats (CC-7578)
Related work items: MSFT-30259074
In `ActionOscDispatch()` in `OutputStateMachineEngine.cpp`, we had a
section for parsing and another section for dispatching. This PR
combines those two blocks since they do not need to be distinct.
## Validation Steps Performed
TerminalApiTests still pass
Display a warning message when the DirectX renderer resolves a font that
isn't the one you selected to warn that it couldn't be found.
Also I wrote the dialog event chain out of `TermControl` to be reusable
in the future for other messages the control might want to tell a host
about and various levels.
## Validation Steps Performed
- Manual validation, setting bad font name, fixing font name with
`settings.json`.
Closes#1017
Fixed potential errors caused by overflow or underfow in
SectionInput.cpp
## PR Checklist
* [x] CLA signed
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
In selectionInput.cpp, there is both a potential overflow and potential
underflow. To address this issue, I casted the calculation up to int,
which is then checked because of integer promotion. Underflow and
underflow is therefore impossible because now if the calculation exceeds
SHORT_MAX, it will have exceeded bufferSize.BottomInclusive() or
bufferSize.Top() anyway, and be set to them.
## Validation Steps Performed
Passed Unit Testing
Manual Validation
Some UTs crash with access violation, that occurs during pane animation.
The reason for this is a race, upon which the pane is closed (set to
nullptr) before the parent is animated. Added a simple check against
null. Doubt it can happen in production, yet worth taking care!
The JsonUtils changes in #8018 revealed that we need more robust,
configurable optional handling. We learned that there's a class of
values that was previously underrepresented in our API: _strings that
have an explicit empty value_.
The Settings model supports starting directory, icon, background image
et al values that are empty. That emptiness _overrides_ a value set in a
lower layer, so it is not sufficient to represent the empty value for
any one of those fields as an unset optional.
There are a couple other settings for which we've implemented a
hand-rolled option type (for roughly the same reason): foreground,
background, any color fields that override values from the color scheme
_or_ the lower layer profile.
These requirements are best fulfilled by better optional support in
JsonUtils. Where the library would originally detect known types of
optional and pre-filter them out during `GetValue` and `SetValue`, it
will now defer to another conversion trait.
This commit introduces a helper conversion trait and an "option oracle".
The conversion trait will use the option oracle to detect emptiness,
generate empty option values, and read values out of option types. In so
doing, the trait is insulated from the implementation details of any
specific option type.
Any special logic for handling JSON null and option types has been
stripped from GetValue. Due to this, there is an express change in
behavior for some converters:
* `GetValue<T>(jsonNull)` where `T` is **not** an option type[1] has
been upgraded from a silent no-op to an exception.
Further, I took the opportunity to replace NullableSetting with
std::optional<std::optional<T>>, which accurately represents "setting
that the user might explicitly clear". I've added a test to
JsonUtilsTests to make sure it can serialize/deserialize double
optionals the way we expect it to.
Tests (Local, Unit for TerminalApp/SettingsModel):
Summary: Total=140, Passed=140, Failed=0, Blocked=0, Not Run=0, Skipped=0
[1]: Explicitly, if `T` is not an option type _and the converter does
not support null_.
I am still not sure what is the full set of scenarios that the problem
might occur, but for me it occurred for an "old" cloud shell account,
and didn't reproduce since I have reconfigured it. These behavior might
be explained by the fact that "preferred shell type" did not exist in
the API originally and thus was not set. In such case, Terminal
succeeds to retrieve to the settings but then crashes when reading the
missing field. To fix it, I handle the case where the field is missing
and fallback to PowerShell.
## Validation Steps Performed
* Tested manually, only once.
Closes#7056
In introduced a bug in #8185, due to which Command Palette sorts items
alphabetically in the tab switcher mode. This PR fixes it.
Validation:
Created tabs with different names and verified that the MRU order is
preserved
Closes#8185
By adding these target Inputs/Outputs to TestHostApp's AfterBuild, we
can ensure that new versions of the test libraries are properly
detected. No longer will we have to delete them from disk and rebuild
TestHostApp and hope that it picks up the latest test binaries.
Oh, and I turned on a couple other optimizations (hard links, skipping
unchanged files) that were really just low-hanging fruit.
* Created a ViewModel class in the Command Palette called
FilteredCommand, aggregating the Command, the filter and the
highlighted presentation of the command name
* This ListView of the filtered commands is bound to the vector of
FilteredCommands
* Introduced HighlightedTextControl user control with HighlightedText
view model
* Added this control to the ListView Item's grid
* Bound the FilteredCommand's highlighted command name to the user
control
## Validation Steps Performed
* UT for matching algorithm
* Only manual tests
* Searching in CommandLine, SwitchTab and Nested Command modes
* Checking for bot matching an non matching filters
* Dogfooding
Closes#6646
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Proto-extensions spec
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Is documentation
* [x] I work here
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
There are certain cursor movement operations (in conhost) that can
result in "ghost" cursor instances being left behind, if the move causes
the viewport to scroll while the cursor is blinking off. Pressing enter
in a PowerShell prompt when at the bottom of the screen was one example
of this. This PR fixes that problem.
Whenever the cursor renders with an `InvertRect`, the affected areas of
the screen are saved in the `cursorInvertRects` variable. If the screen
is then scrolled while the cursor is visible, those rects are
"uninverted" in the `GdiEngine::ScrollFrame` method before the scrolling
takes place.
When the cursor has blinked off, though, the `GdiEngine::PaintCursor`
method won't set the `cursorInvertRects` variable, but it also doesn't
clear it. So if the screen is scrolled at that point, the `ScrollFrame`
method tries to "uninvert" the area where the cursor had previously been
painted. And since the cursor is no longer there, this has the opposite
effect, leaving an unwanted mark on the screen.
I've fixed this by clearing the `cursorInvertRects` at the start of the
paint cycle, in the the `GdiEngine::PaintBackground` method. Since this
occurs after the `ScrollFrame` step, it still allows for legitimate
cursor instances to be cleaned up when scrolling, but makes sure that
the variable will be cleared for the next cycle if the cursor is no
longer visible.
## Validation Steps Performed
I've manually verified that I no longer see ghost cursor fragments when
scrolling in PowerShell.
Closes#804
## Summary of the Pull Request
Changes the way the `useTabSwitcher` setting works. It now accepts either a boolean or a string:
* `true`, `"mru"`: Use the tab switcher with MRU tab switching
* `"inOrder"`: Use the tab switcher, with in-order tab switching
* `false`, `"disabled"`: Don't use the tab switcher. Tabs will switch in-order.
This is following the discussion chronicled in #8025, as well as the follow-up investigation in that thread.
## References
* #7952 introduced MRU tab switching
## PR Checklist
* [x] Closes#8025 - there's also discussion of using a parameter in an action to override this setting, but that should get punted to a follow-up task
* [x] I work here
* [x] Tests added/passed - YOU BET THEY WERE
* [ ] Requires documentation to be updated
## Validation Steps Performed
I've been switching tabs all day and all night, with different settings values, and hot-reloading the setting.
I also _ran the test_ I added.
This commit adds functionality so that users can move back from sub menu
whenever they want. As a result, users no longer have to close command
palette and open it again to get all commands again.
Closes#7910
## Summary of the Pull Request
When we get a serialization error, we "catch" it in `AppLogic` and only
`LoadDefaults()`. Since `LoadDefaults()` doesn't perform a full
validation of `CascadiaSettings`, we need to manually update our list of
active profiles (similar to how we manually resolve the default
profile).
## Validation Steps Performed
Repro steps fixed:
1. add deserialization error to settings.json (i.e. "fontWeight": "wumbo")
2. launch WT
3. verify that dropdown is populated with active profiles
Closes#8146
## Summary of the Pull Request
With this PR, the Terminal will check to make sure the "Touch, Keyboard and Handwriting Panel Service" is enabled at startup. If it isn't, then the Terminal won't be able to receive keyboard input (see #4448 and the 20 linked issues to that one).
## References
* See #4448 for more details
## PR Checklist
* [x] Closes#7886
* [ ] Should this make #4448 not-open as well?
* [x] I work here
* [n/a] Tests added/passed
* [x] Docs: https://github.com/MicrosoftDocs/terminal/pull/168
## Validation Steps Performed
I manually set the service to "Disabled", restarted the machine, verified the dialog opens (and that I'm unable to type in the Terminal), then re-set the service to automatic and rebooted, and the dialog doesn't appear.
Let's not just disable the `on` rules for the linter, let's just remove
it entirely. The way it's set up now, you'll get an email every time you
push to a PR, because GitHub fails to find any time to run the linter.
* [x] I work here
* [x] Follow-up to #8152
In preparation for the Settings UI, we needed to make some changes to
Tab to abstract out shared, common functionality between different types
of tab. This is the result of that work. All code references to the
settings have been removed or reverted.
Contains changes from #8053, #7802.
The messages below only make sense in the context of the Settings UI,
which this pull request does not bring in. They do, however, provide
valuable information.
From #7802 (@leonMSFT):
> This PR's goal was to add an option to the `OpenSettings` keybinding to
> open the Settings UI in a tab. In order to implement that, a couple of
> changes had to be made to `Tab`, specifically:
>
> - Introduce a tab interface named `ITab`
> - Create/Rename two new Tab classes that implement `ITab` called
> `SettingsTab` and `TerminalTab`
>
From #8053:
> `TerminalTab` and `SettingsTab` share some implementation details. The
> close submenu introduced in #7728 is a good example of functionality
> that is consistent across all tabs. This PR transforms `ITab` from an
> interface, into an [unsealed runtime class] to de-duplicate some
> functionality. Most of the logic from `SettingsTab` was moved there
> because I expect the default behavior of a tab to resemble the
> `SettingsTab` over a `TerminalTab`.
>
> ## References
> Verified that Close submenu work was transferred over (#7728, #7961, #8010).
>
> ## Validation Steps Performed
> Check close submenu on first/last tab when multiple tabs are open.
>
> Closes#7969
>
> [unsealed runtime class]: https://docs.microsoft.com/en-us/uwp/midl-3/intro#base-classes
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Leon Liang <lelian@microsoft.com>
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
This pull request switches up the treatment we use for pattern-detected
links and OSC 8 hyperlinks:
* Links generated via OSC 8 have a sparse dotted underline instead of a
thick dashed one
* Links generated by pattern detection _are not underlined until they've
hovered_
* This papers over a visual glitch that is a result of us updating
the pattern matches every ~500ms (on change)
Closes#8123
Turns out there's an actual way to specify C++17 for MSBuild purposes
besides just passing the compile flag.
## References
* Future C++20 support (modules)
## PR Checklist
* [x] Closes random fact found while exploring VS16.8 preview C++20
modules.
* [x] I work here.
* [x] It still builds.
## Detailed Description of the Pull Request / Additional comments
* We've been setting C++17 with just the flag passed to the compiler
`cl.exe`. But it turns out that this particular `LanguageStandard`
option will need to be set appropriately one day for us to use C++20
modules (as evidenced by the latest VS16.8 preview that I tried out to
explore modules.) The `AdditionalOption` alone isn't enough to ensure
that modules can be "seen" by other projects after production, but
`LanguageStandard` is (and will set the compiler option as appropriate
as well as whatever internal goo that MSBuild needs to hook up other
stuff.)
## Validation Steps Performed
* Built with it changed.
Fix#8121
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
When calculating the position of the matched pattern, consider the width of the characters.
However, if there are some wide glyphs in the detected hyperlink(not possible for now, for the existing regex will not match wide-character?). The repeated character in the tooltip is not fixed by this PR.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#8121
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
When calculating the coordinate of the match in #7691, it simply uses the `prefix.size()` as the total prefix width on the screen.
This PR fixes that behavior.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manually Verified
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
In the focus mode the top border disappears upon resize. While this behavior is expected in the maximized / full screen mode, it should not happen in the focus mode.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/7012
* [x] CLA signed
* [ ] Tests added/passed - nope, only manual testing
* [ ] Documentation updated - irrelevant
* [ ] Schema updated - irrelevant
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
_GetTopBorderHeight method returns 0 when maximized or no title bar is visible. However the existence of top border has nothing to do with whether the title bar is visible. We want to leave the border as long as the window is not in some form of maximizing (maximized / full screen)
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
* Manual - dragging, resizing, maximizing both in focus and non focus modes + full screen testing
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/7996
* [x] CLA signed.
* [ ] Documentation updated - irrelevant
* [ ] Schema updated - irrelevant
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Currently the value of AlwaysOnTop is read by the AppHost from AppLogic that takes this value from the root TerminalPage. However at this stage neither AppLogic nor TerminalPage are initialized, and thus the return value is always false.
This PR introduces a "GetInitialAlwaysOnTop" method to AppLogic that returns a value that is configured in the settings.
In addition, the TerminalPage creation was fixed to read the configuration value upon creation (and not just after settings reload).
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
* Only manual testing
* Starting the system with both initial value set to true and false
* Verifying that dynamic toggling on / off is not affected
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
A second close command (middle click on taskbar preview) overrides the warning dialog and closes the application.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7451
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
When a close command is invoked (middle click on taskbar preview or 'X' button), a new flag is set. When the user wants to close again (this time only via the taskbar preview, as the 'X' button is disabled), the application is closed. If the user cancels the dialog, the flag is reset to prevent accidental closing on a subsequent close command.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I am developing with a [Windows 10 virtual machine](https://developer.microsoft.com/en-us/windows/downloads/virtual-machines/) provided by Microsoft. I tested manually. I considered the 'X' button, middle click on taskbar preview, and Alt+F4. Only a middle click on the taskbar preview does override the dialog.
Fire and forget on the hyperlink handler inside the TermControl.
## PR Checklist
* [x] Closes#7994
* [x] Tested manually
* [x] Hi, I work here.
## Detailed Description of the Pull Request / Additional comments
In `TermControl`, `_HyperlinkHandler` is called by
`_PointerPressedHandler` which has taken a write lock for all its
friends. However, `_HyperlinkHandler` downstreams to `ShellExecute`
which can pump the message queue looking for something. That pumping of
the queue can trigger messages that also want the write lock to update
state. They get stuck. Everything hangs.
`_HyperlinkHandler` really only needs read lock and really only for as
long as it takes to fill up its parameters before it's invoked... but
the simpler and more contained solution is to just fire and forget the
rest of the method that causes the deadlock to a continuation at the
tail of the dispatcher queue so `_PointerPressedHandler` can complete
and naturally drop the write lock.
## Validation Steps Performed
- Launched `main` manually on my box and clicked the hyperlink that is
detected when Powershell starts and it froze.
- Launched this change manually on my box and clicked the hyperlink that
is detected when Powershell starts and it did not freeze.
This pull request switches us to the new WinDev scaleset agent pool. It
should be faster than the hosted pool, and the larger disks allow us to
get rid of our PCH cleanup step.
This pull request is the initial implementation of hyperlink auto
detection
Overall design:
- Upon startup, TerminalCore gives the TextBuffer some patterns it
should know about
- Whenever something in the viewport changes (i.e. text
output/scrolling), TerminalControl tells TerminalCore (through a
throttled function for performance) to retrieve the visible pattern
locations from the TextBuffer
- When the renderer encounters a region that is associated with a
pattern, it paints that region differently
References #5001Closes#574
All our JSON files are _actually_ JSONC files - json with comments.
A well-behaved application that accepts JSON should accept and ignore
comments. However, `jsonlint` is not a well behaved application in this
regard.
So, to prevent the linter from complaining about our JSON comments, we
need to disable it entirely. THAT'S RIGHT, there's not a setting to
allow JSONC.
See #8076 as an example of this working.
This will also unblock #7462.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Realized that we don't copy the current hyperlink id when we copy buffers, quick fix for that
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
This PR replaces `CascadiaSettings::_profiles` with...
- `_allProfiles`: the list of all available profiles in the settings model (i.e. settings.json, dynamic profiles, etc...)
- `_activeProfiles`: the list of all non-hidden profiles (used for the new tab dropdown)
## References
#8018: maintaining a list of all profiles allows us to serialize hidden profiles
#1564: Settings UI can link to `AllProfiles()` instead of `ActiveProfiles()` to expose hidden profiles
## PR Checklist
* [x] Closes#4139
* [x] Tests added/passed
## Validation Steps Performed
Deploy and testing succeeded
C++/WinRT added a feature where it will detect a mismatch in some of its
build flags.
Because we build XAML projects and non-XAML projects, and try to link
them together in static libraries, we need those flags to always match.
C++/WinRT only respects this flag when `DEBUG` is set, so our CI missed
this.
With thanks to @carlos-zamora for letting me build/test/commit this on
his computer.
This commit introduces 8 more variants of the .ICO file, embeds the
right ones into WindowsTerminal.exe, and adds code that will select the
most appropriate icon at runtime.
Since we're a Centennial application, the "application" icon inside our
package isn't used by the shell for the taskbar thumbnails or the
Alt-Tab window.
To quote J. Tippet,
> I believe there are two possible fixes:
>
> 1. Fix the OS shell to prefer the MRT icon instead of preferring the
> win32 icon
> 2. Add alternate versions of /res/terminal.ico
> The 1st fix is clearly better, since it benefits any hybrid app. But
> the 2nd fix is much easier, since it'd just take about an hour to gin up
> a new .ico file and hack the .RC file to refer to it when building the
> preview flavor.
... and to quote Michael Ratanapintha,
> Basically, if your MSIX-packaged desktop app's image resources are
> separate files or even separate MSIX packages, they may be loaded by
> MRT. If they're embedded in the .exe, they're the old-fashioned Win32
> resources Mr. Tippet is referring to.
This is the "2nd fix."
Fixes#6777
Co-authored-by: Jeffrey Tippet <jtippet@ntdev.microsoft.com>
This commit fixes our longstanding build artifact output issues and
finally unifies all C++ project output into bin/ and obj/.
In light of that, I've removed NoOutputRedirection.
I've also updated WTU and U8U16Test to use our common build props and
fixed any warnings/compilation errors that popped out.
I validated this change by running repeated incremental builds after
changing individual .cpp files in many of our C++/WinRT projects.
While not explicitly permitted, a wide range of software (including
Windows' own touch keyboard) sets the `wScan` member of the `KEYBDINPUT`
structure to 0, resulting in `scanCode` being 0 as well. In these
situations we'll now use the `vkey` to get a `scanCode`.
Validation
----------
* AutoHotkey
* Use a keyboard layout with `AltGr` key
* Execute the following script:
```ahk
#NoEnv
#Warn
SendMode Input
SetWorkingDir %A_ScriptDir%
<^>!8::SendInput {Raw}»
```
* Press `AltGr+8` while the Terminal is in the foreground
* Ensure » is being echoed ✔️
* PowerToys
* Add a `Ctrl+I -> ↑ (up arrow)` keyboard shortcut
* Press `Ctrl+I` while the Terminal is in the foreground
* Ensure the shell history is being navigated backwards ✔️
* Windows Touch Keyboard
* Right-click or tap and hold the taskbar and select "Show touch
keyboard" button
* Open touch keyboard
* Ensure keyboard works like a regular keyboard ✔️
* Ensure unicode characters are echoed on the Terminal as well (except
for Emojis) ✔️Closes#7438Closes#7495Closes#7843
This commit also adds an override UCD and migrates all of the overrides
from GetQuickCharWidth into it.
GetQuickCharWidth
-----------------
The removal of overrides from GQCW reduces the number of comparisons
required for looking up a single character's width from 41 (32
individual ranged comparisons from GQCW + 8+1 from the binary search in
CPWD) to 11 (2 from GQCW, 8+1 from CPWD).
GQCW also incorrectly marked 67 reserved codepoints as `Wide` when they
should have been `Narrow`.
The codepoints whose definitions have changed from `Wide` to `Narrow` are:
```
2E9A 2EF4 2EF5 2EF6 2EF7 2EF8 2EF9 2EFA 2EFB 2EFC 2EFD 2EFE 2EFF 2FD6
2FD7 2FD8 2FD9 2FDA 2FDB 2FDC 2FDD 2FDE 2FDF 2FE0 2FE1 2FE2 2FE3 2FE4
2FE5 2FE6 2FE7 2FE8 2FE9 2FEA 2FEB 2FEC 2FED 2FEE 2FEF 2FFC 2FFD 2FFE
2FFF 31E4 31E5 31E6 31E7 31E8 31E9 31EA 31EB 31EC 31ED 31EE 31EF 321F
A48D A48E A48F FE1A FE1B FE1C FE1D FE1E FE1F FE53 FE67
```
All of them are reserved, but those reserved regions are marked as narrow
in the UCD.
This change also offers us the chance to document exactly why we're
overriding a specific character range. Comments from the override
document will be copied to the generated CPWD table.
New in Unicode 13.0
------------------
Some widths have changed due to previously-reserved characters becoming
_used_ such as U+32FF SQUARE ERA NAME REIWA, the Tangut components
756-768, the entire Khitan Small Script character set, and the Tangut
Ideographs.
A number of the changes in this diff are due to better/worse comment
tracking and the removal of the Emoji/EPres comments. The script once
mistakenly applied comments to packed regions (and it has been updated
to not do so.)
Validation
----------
I build a test application that compared codepoints 0-FFFF for GQCW
against their new registered widths.
## Summary of the Pull Request
Introduces `IInheritable` as an interface that helps move cascading settings into the Terminal Settings Model. `GlobalAppSettings` and `Profile` both are now `IInheritable`. `CascadiaSettings` was updated to `CreateChild()` for globals and each profile when we are loading the JSON data.
IInheritable does most of the heavy lifting. It introduces a two new macros and the interface. The macros help implement the fallback functionality for nullable and non-nullable settings.
## References
#7876 - Spec Addendum
#6904 - TSM Spec
#1564 - Settings UI
#7876 - `Copy()` needs to be updated to include _parent
Close the tab context menu when clicking on the title bar
## Detailed Description of the Pull Request / Additional comments
Following #2438, hide the tabs context menu on `TerminalPage::TitlebarClicked()`.
We don't know which of the tabs is showing the context menu, do it on all tabs.
## Validation Steps Performed
Open the context menu from any tab, click on title bar and see the context menu disappear.
Closes#7988
We are getting some watson crash reports that the terminal is attempting
to resize to `(0, 0)`. This change makes it so that we prevent such
resizing and if so, throw an exception before we reach native code.
This commit adds resizing checks that prevent resizing the terminal WPF
control to a size of `(0, 0)`
- The number of lines to move upon scroll up scroll down can be defined
in ScrollUp and ScrollDown commands (parameter is called
"rowsToScroll").
- If the number are not provided, use the system default (the one we are
using for mouse scrolls), rather than 1 line.
## Validation Steps Performed
* Manual testing
* Added custom bindings for scroll commands with different values,
verified they and the default appear and behave as expected
* Checked that invalid values are not allowed
Closes#5078
This introduces an addendum to the Terminal Settings Model spec that
covers inheritance and fallback. Basically, settings objects will now
have a reference to a parent object. If the settings object does not
have a setting defined, it will ask its parent to resolve the value. A
parent is set using the `Clone()` function. `Copy()` is used to copy the
value and structure of the settings model, whereas `Clone()` is used to
copy a reference to the settings model and build an inheritance tree.
## References
#6904 - Terminal Settings Model Spec
#1564 - Settings UI
This PR resolves an issue I observed in
Microsoft.Terminal.Wpf.TerminalControl.CalculateMargins(). Specifically,
on line 194 in the project. In this example, the line: `height =
controlSize.Height - (this.TerminalRendererSize.Height /
dpiScale.DpiScaleX);` is associating the height margin with
dpiScale.DpiScaleX instead of dpiScale.DpiScaleY. This PR changes the
association to DpiScaleY.
Closes#8038
The intent of this PR is to resolve the dependency errors reported in
#7931. The Types project has been added as a reference to the
FuzzWrapper project, which fixes the unresolved dependency errors
reported.
For validation steps, I:
1.) Pulled down main.
2.) Rebuilt the FuzzWrapper project and observed the unresolved
dependency errors keeping it from building successfully.
3.) Added a project reference to the Types project.
4.) Rebuilt the FuzzWrapper project and verified that the dependency
errors disappeared.
Closes#7931.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
Adds the color slider to the tab color picker
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7948
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] ~Tests added/passed~
* [ ] ~Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx~
* [ ] ~Schema updated.~
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #7948
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
*Not required*
We wrap the call to `_WriteSettings` in
`CascadiaSettingsSerialization.cpp` in a try/catch block, and if we
catch an error we append a warning telling the user to check the
permissions on their settings file.
Closes#7727
Our build pipeline was originally set up such that we could take any
binaries from the Terminal build and seamlessly re-package them with the
release or preview livery. My initial plan was to stamp a stable and
preview build at the same time, out of the same bits, to make ring
promotion easier.
I've never done that. For the last five releases, we've just re-cut a
new stable build along with the new preview build, usually because we
want to backport some fixes to stable.
This commit introduces preprocessor defines, detectable through CL and
RC, for any project that wants them. Right now, that's just going to be
WindowsTerminal.vcxproj (since it hosts the icons and the app entry
point). This list may be extended to include wt (the shim executable)
and the shell extension at some future date.
This will greatly simplify the logic in #7971, as we'll no longer need
to detect if we're dev or preview at runtime. It may also simplify the
logic in the shell extension for determining whether we're Dev or not.
## Summary of the Pull Request
Fixes the bug where `exit`ing inside a closed pane would leave the Terminal blank.
Additionally, removes `Tab::GetRootElement` and replaces it with the _observable_ `Tab::Content`. This should be more resilient in the future.
Also adds some tests, though admittedly not for this exact scenario. This scenario requires a cooperating TerminalConnection that I can drive for the sake of testing, and _ain't nobody got time for that_.
## References
* Introduced in #6989
## PR Checklist
* [x] Closes#7252
* [x] I work here
* [x] Tests added/passed 🎉
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
From notes I had left in `Tab.cpp` while I was working on this:
```
OKAY I see what's happening here the ActivePaneChanged Handler in TerminalPage
doesn't re-attach the tab content to the tree, it just updates the title of the
window.
So when the pane is `exit`ed, the pane's control is removed and re-attached to
the parent grid, which _isn't in the XAML tree_. And no one can go tell the
TerminalPage that it needs to re set up the tab content again.
The Page _manually_ does this in a few places, when various pane actions are
about to take place, it'll unzoom. It would be way easier if the Tab could just
manage the content of the page.
Or if the Tab just had a Content that was observable, that when that changed,
the page would auto readjust. That does sound like a LOT of work though.
```
## Validation Steps Performed
Opened panes, closed panes, exited panes, zoomed panes, moved focus between panes, panes, panes, panes
## Summary of the Pull Request
Just deleting an unnecessary call to `_UpdateCommandsForPalette`
**Note:** This only fixes slowdown when opening/closing a tab, but not upon first startup (we still need to call `_UpdateCommandsForPalette` there
## References
Fixes the slowdown described in #7820 for opening and closing tabs, but doesn't improve startup time dramatically.
## Validation Steps Performed
Tested with ~100 profiles in my settings file
This PR changes the ATS display order to _always_ be in most recently
used (MRU) order. I chose not to give ATS the option to be displayed
in-order because that order is better served through the traditional
left-right TabRow switching.
_Note_: `TabSearch` will stay in-order.
This means that users can only choose one order or another in their
`nextTab/prevTab` bindings. Setting `useTabSwitcher` to true will make
nT/pT open the ATS in MRU order. If it's set to false, the ATS won't
open and nT/pT will simply go left and right on the TabRow.
I'm open to getting rid of the global and making ATS its own keybinding,
but for now I figured I would keep the current behavior and open the PR
to get eyes on the code that doesn't have anything to do with the
settings.
Closes#973
Let's assume the user has bound the dead key ^ to a sendInput command
that sends "b". If the user presses the two keys ^a it'll produce "bâ",
despite us marking the key event as handled. We can use `ToUnicodeEx`
to clear such dead keys from the keyboard state and should make use of
that for keybindings. Unfortunately `SetKeyboardState` cannot be used
for this purpose as it doesn't clear the dead key state.
Validation
* Enabled a German keyboard layout
* Added the following two keybindings:
{ "command": { "action": "sendInput", "input": "x" }, "keys": "q" },
{ "command": { "action": "sendInput", "input": "b" }, "keys": "^" }
* Pressed the following keys → ensured that the given text is printed:
* q → x
* ´ → nothing
* a → á
* ^ → b
* a → a (previously this would print: â)
* ´ → nothing
* ^ → b
* a → a (unfortunately we cannot specifically clear only ^)
Closes#5784
Updates the GH Action and makes a small update to the README to test
changes.
A missing install step for Windows Terminal using Scoop has been added.
The versioning of Super-Linter was also switched to v3 to allow
auto-updates within the v3 series. This can be version-pinned again if a
breaking change comes later. The current updates fix some bugs and bump
the linters utilized.
## Validation Steps Performed
Validation will be shown in the build steps.
Closes#7934
Fix for crash occurring when splitting a pane, due to tab context menu created multiple times.
## References
#7728
## PR Checklist
* [x] Closes#7941
* [x] CLA signed.
## Detailed Description of the Pull Request / Additional comments
When splitting panes the `Tab::Initialize` function is called again. This rebuilt the context menu from scratch and appended the existing Close... sub-menu items to a new parent, thus causing the crash.
It is not necessary to re-create the context menu every time you split panes, it can be created only once.
## Validation Steps Performed
Manual verification:
- Play with the context menu, the Close... submenu is functioning
- Split panes (ALT + New tab), no crash occurs and context menu still functioning
## Summary of the Pull Request
This implements the `Copy` function for `CascadiaSettings`. Copy performs a deep copy of a `CascadiaSettings` object. This is needed for data binding in the Terminal Settings Editor.
The `Copy` function was basically implemented in every settings model object. This was mostly just repetitive work.
## References
#7667 - TSM
#1564 - Settings UI
## PR Checklist
* [X] Tests added/passed
It turns out that we missed part of the OSC 8 spec which indicated that
_hyperlinks with the same ID but different URIs are logically distinct._
> Character cells that have the same target URI and the same nonempty id
> are always underlined together on mouseover.
> The same id is only used for connecting character cells whose URIs is
> also the same. Character cells pointing to different URIs should never
> be underlined together when hovering over.
This pull request fixes that oversight by appending the (hashed) URI to
the generated ID.
When Terminal receives one of these links over ConPTY, it will hash the
URL a second time and therefore append a second hashed ID. This is taken
as an acceptable cost.
Fixes#7698
This commit adds a missing conversion utf8 to utf16 in decoding base64
for handling multibyte text in copying via OSC 52.
## Validation Steps Performed
* automatically
* Tests w/ multibyte characters
* manually
* case1
* Executed `printf "\x1b]52;;%s\x1b\\" "$(printf '👍👍🏻👍🏼👍🏽👍🏾👍🏿' | base64)"`
* Verified `👍👍🏻👍🏼👍🏽👍🏾👍🏿` in my clipboard
* case2
* Copied `👍👍🏻👍🏼👍🏽👍🏾👍🏿` by tmux 2.6 default copy function (OSC 52)
* Verified `👍👍🏻👍🏼👍🏽👍🏾👍🏿` in my clipboard
Closes#7819
This optimizes the binary size of the xorg color table by replacing the
static lookup table with a table of variable colors (indexed "" (0)
through "4"), calculated greys for gr[ae]y0-100, and a table of the
remaining unsuffixed colors.
78 variable colors ...
8 bytes each for pointer+size
5 variants, 4 bytes each for the color data
718 bytes for 0-terminated color names
plus
84 colors ...
8 bytes each for pointer+size
4 bytes each for the color data
955 bytes for 8-terminated color names
2902 = (78 * 8) + (78 * 5 * 4) + 718
+ 1963 = (84 * 8) + (84 * 4) + 955
------
4865 bytes (approximately)
"I couldn't sleep at night thinking that after years of accusing Windows
being bloated and literally making it even more bloated with my hands.
So here you go. The mediocre yet working solution. This reduces the
binary size to 1051k (1067k before) while keeping the code maintainable
for human beings."
VsCode uses `>` as its "prefix" for the equivalent of their "action
mode". This PR aligns the Terminal with their logic here.
We have to be tricky - if we use the `>` in the actual input as the
indicator for action mode, we can't display any placeholder text in the
input to tell users to type a command. This wasn't an issue for the
commandline mode previously, because we'd stick the "prompt" in the "no
matches text" space. However, we can't do that for action mode. Instead,
we'll stick a floating text block over the input box, and when the
user's in action mode, we'll manually place a `>` into that space. When
the user backspaces the `>`, we'll remove it from that block, and switch
into commandline mode.
## Validation Steps Performed
Played with the cmdpal in lots of different modes, this finally feels
good
Closes#7736
This PR adds support for the `DECREQTPARM` (Request Terminal Parameters)
escape sequence, which was originally used on the VT100 terminal to
report the serial communication parameters. Modern terminal emulators
simply hardcode the reported values for backward compatibility.
The `DECREQTPARM` sequence has one parameter, which was originally used
to tell the terminal whether it was permitted to send unsolicited
reports or not. However, since we have no reason to send an unsolicited
report, we don't need to keep track of that state, but the permission
parameter does still determine the value of the first parameter in the
response.
The response parameters are as follows:
| Parameter | Value | Meaning |
| ---------------- | ------ | ------------------------ |
| response type | 2 or 3 | unsolicited or solicited |
| parity | 1 | no parity |
| data bits | 1 | 8 bits per character |
| transmit speed | 128 | 38400 baud |
| receive speed | 128 | 38400 baud |
| clock multiplier | 1 | |
| flags | 0 | |
There is some variation in the baud rate reported by modern terminal
emulators, and 9600 baud seems to be a little more common than 38400
baud, but I thought the higher speed was probably more appropriate,
especially since that's also the value reported by XTerm.
## Validation Steps Performed
I've added a couple of adapter and output engine tests to verify that
the sequence is dispatched correctly, and the expected responses are
generated. I've also manually tested in Vttest and confirmed that we now
pass the `DECREQTPARM` test in the _Test of terminal reports_.
Closes#7852
Adds a new setting, `bellStyle`, to be able to disable the audible bell
added in #7679. Currently, this setting accepts two values:
* `audible`: play a noise on a bell
* `none`: Don't play a noise.
In the future, we can add a `"bellStyle": "visible"` for flashing the
Terminal instead of making a noise on bell.
## Validation Steps Performed
Pressing <kbd>Ctrl+G</kbd> in cmd, and hitting enter is an easy way of
triggering a bell. I set the setting to `none`, and presto, the bell
stopped.
Closes#2360
This commit is in support of WTU.
I initially added support for a new flag, `PSEUDOCONSOLE_UNDOCKED_PREFER_INBOX_CONHOST`,
which I liked because it was more explicit. We chose not to go that route.
### Automatic fallback
#### Pros
* It's easier on the consumer
* We can eventually expand it to support `$ARCH/openconsole.exe`
#### Cons
* Packaging the project wrong will result in a working-but-somewhat-broken experience (old conhost)
* We ameliorated this by checking it in the packaging script.
* Implicit behavior may be bad
Terminal ships with this dependency embedded, and it is not required that you install it separately. Since the link is broken, let's just remove it entirely.
* [x] fixes#7889
* [x] related to https://github.com/microsoft/terminal/issues/7917#issuecomment-707955335
* [x] I work here
* [x] is a docs update
Additionally, update the markdown linter rules in the wake of #7637, because apparently that was never actually applied to any files, so now the onus is on the first person to touch any of our markdown files.
This PR introduces a pair of classes for managing VT parameters that
automatically handle range checking and default fallback values, so the
individual operations don't have to do that validation themselves. In
addition to simplifying the code, this fixes a few cases where we were
mishandling missing or extraneous parameters, and adds support for
parameter sequences on commands that couldn't previously handle them.
This PR also sets a limit on the number of parameters allowed, to help
thwart DoS memory consumption attacks.
## References
* The new parameter class also introduces the concept of an
omitted/default parameter which is not necessarily zero, which is a
prerequisite for addressing issue #4417.
## Detailed Description of the Pull Request / Additional comments
There are two new classes provide by this PR: a `VTParameter` class,
similar in function to a `std::optional<size_t>`, which holds an
individual parameter (which may be an omitted/default value); and a
`VTParameters` class, similar in function to `gsl:span<VTParameter>`,
which holds a sequence of those parameters.
Where `VTParameter` differs from `std::optional` is with the inclusion
of two cast operators. There is a `size_t` cast that interprets omitted
and zero values as 1 (the expected behaviour for most numeric
parameters). And there is a generic cast, for use with the enum
parameter types, which interprets omitted values as 0 (the expected
behaviour for most selective parameters).
The advantage of `VTParameters` class is that it has an `at` method that
can never fail - out of range values simply return the a default
`VTParameter` instance (this is standard behaviour in VT terminals). It
also has a `size` method that will always return a minimum count of 1,
since an empty parameter list is typically the equivalent of a single
"default" parameter, so this guarantees you'll get at least one value
when iterating over the list with `size()`.
For cases where we just need to call the same dispatch method for every
parameter, there is a helper `for_each` method, which repeatedly calls a
given predicate function with each value in the sequence. It also
collates the returned success values to determine the overall result of
the sequence. As with the `size` method, this will always make at least
one call, so it correctly handles empty sequences.
With those two classes in place, we could get rid of all the parameter
validation and default handling code in the `OutputStateMachineEngine`.
We now just use the `VTParameters::at` method to grab a parameter and
typically pass it straight to the appropriate dispatch method, letting
the cast operators automatically handle the assignment of default
values. Occasionally we might need a `value_or` call to specify a
non-standard default value, but those cases are fairly rare.
In some case the `OutputStateMachineEngine` was also checking whether
parameters values were in range, but for the most part this shouldn't
have been necessary, since that is something the dispatch classes would
already have been doing themselves (in the few cases that they weren't,
I've now updated them to do so).
I've also updated the `InputStateMachineEngine` in a similar way to the
`OutputStateMachineEngine`, getting rid of a few of the parameter
extraction methods, and simplifying other parts of the implementation.
It's not as clean a replacement as the output engine, but there are
still benefits in using the new classes.
## Validation Steps Performed
For the most part I haven't had to alter existing tests other than
accounting for changes to the API. There were a couple of tests I needed
to drop because they were checking for failure cases which shouldn't
have been failing (unexpected parameters should never be an error), or
testing output engine validation that is no longer handled at that
level.
I've added a few new tests to cover operations that take sequences of
selective parameters (`ED`, `EL`, `TBC`, `SM`, and `RM`). And I've
extended the cursor movement tests to make sure those operations can
handle extraneous parameters that weren't expected. I've also added a
test to verify that the state machine will correctly ignore parameters
beyond the maximum 32 parameter count limit.
I've also manual confirmed that the various test cases given in issues
#2101 are now working as expected.
Closes#2101
## Summary of the Pull Request
Added watch on desktopImagePath to check when the path equals "DesktopWallpaper"
If it does equal "DesktopWallpaper" it replaces the path with a path to the desktop's wallpaper
*I am a student and this is my first pull request for Terminal so please give feedback no matter how small. It's the best way I can learn.
## PR Checklist
* [X] Closes#7295
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [?] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: https://github.com/MicrosoftDocs/terminal/pull/155
* [?] Schema updated. (Not sure if this is needed, also not sure where this would be)
* [X] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #7295 (Have only talked with the people on the issue, which I don't think has any core contributors)
## Detailed Description of the Pull Request / Additional comments
I am using SystemParametersInfo for SPI_GETDESKWALLPAPER which puts the path into a WCHAR and that is then inserted as the BackgroundImagePath.
I do not think an additional test would add value. The SPI_GETDESKTOPWALLPAPER uses the computers local wallpaper path and puts it into a WCHAR, which then I feed into BackgroundImagePath() as it's new path. I don't think there adds value in making a static path of the desktop background and testing that, given that static tests are already done for "BackgroundImage()".
## Validation Steps Performed
(Manual Validation - Test False Value)
1. Ran Terminal
2. Set setting ["backgroundImage": "<some random img path>"] under profiles->defaults
3. Verified terminal's background is not the desktops wallpaper.
(Manual Validation - Test True Value)
1. Ran Terminal
2. Set setting ["backgroundImage": "DesktopWallpaper"] under profiles->defaults
3. Verified the background image matches the desktop background image.
(Manual Validation - Multiple Tabs True Value)
1. Ran Terminal
2. Set setting ["backgroundImage": "DesktopWallpaper"] under profiles->defaults
3. Verified the background image matches the desktop background image.
4. Opened new tabs
5. Verified the background image matches the desktop background image for each tab.
For whatever reason, the super linter seems to think that any file it doesn't recognize is an EDITORCONFIG file. That means all our `cpp`, `hpp`, `h`, `resw`, `xaml`, etc files are going to get linted with different rules than the clang-format ones we already use.
This PR disables the EDITORCONFIG linter, and has a minimal change to a cpp file to ensure that it's no longer linted by the action.
See also:
* #7637 added this
* #7799 is blocked by this
* #7924 is blocked by this
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add a "Close..." option to the tab context menu, with nested entries to close tabs to the right and close other tabs (actions already available)
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#1912
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5524
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
First contribution 🙂
Tried to follow some suggestions from https://github.com/microsoft/terminal/issues/1912#issuecomment-667079311
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This uses the templates from
https://github.com/github/super-linter/tree/master/TEMPLATES currently.
A future PR can add the necessary templates to the Windows Terminal
repository and update the source of Templates following the README.
Additionally we can add flags to explicitly choose the linters
applicable to this code base but is not necessary.
Per the README, this does not enforce any linting rules but rather
outputs the suggestions in the build step, which are to be read by the
PR submitter and Windows Terminal team to determine if they want to use
the linting rule. C++ is currently not supported (Powershell, Json,
Yaml, and Markdown will be the only things the linter checks for
currently) but we could add our own custom support if desired in
separate PR.
## Validation Steps Performed
It successfully runs. Currently only shows the yaml file itself being
linted in this PR as a test case. It will apply to new PRs once this is
merged. We can lint existing code base but would require a separate PR
and examining the code output (also requires updating the yaml file
temporarily).
Closes#7513
* Correct the behaviour of parsing `rgb:R/G/B`. It should be interpreted
as `RR/GG/BB` instead of `0R/0G/0B`
* Add support for `rgb:RRR/GGG/BBB` and `rgb:RRRR/GGGG/BBBB`. The
behaviour of 12 bit variants is to repeat the first digit at the end,
e.g. `rgb:123/456/789` becomes `rgb:1231/4564/7897`.
* Add support for `#` formats. We are following the rules of
[XParseColor] by interpreting `#RGB` as `R000G000B000`.
* Add support for XOrg app color names, which are supported by xterm, VTE
and many other terminal emulators.
* Multi-parameter OSC 4 is now supported.
* The chaining of OSC 10-12 is not yet supported. But the parameter
validation is relaxed by parsing the parameters as multi-params but
only use the first one, which means `\e]10;rgb:R/G/B;` and
`\e]10:rgb:R/G/B;invalid` will execute `OSC 10` with the first color
correctly. This fixes some of the issues mentioned in #942 but not
all of them.
[XParseColor]: https://linux.die.net/man/3/xparsecolorCloses#3715
This commit introduces two new launch modes: focus and maximizedFocus.
* Focused mode, behaves like a default mode, but with the Focus Mode
enabled.
* Maximized focused mode, behaves like a Maximized mode, but with the
Focus Mode enabled.
There two ways to invoke these new modes:
* In the settings file: you set the "launchMode" to either "focus" or
"maximizedFocus"
* In the command line options, you can path -f / --focus, which is
mutually exclusive with the --fullscreen, but can be combined with the
--maximized:
* Passing -f / --focus will launch the terminal in the "focus" mode
* Passing -fM / --focus --maximized will launch the terminal in the
"maximizedFocus" mode
This should resolve a relevant part in the command line arguments
mega-thread #4632Closes#7124Closes#7825Closes#7875
Took this as an easy starter. The method IslandWindow::SetAlwaysOnTop is
triggered once terminal settings are reloaded (in
TerminalPage::_RefreshUIForSettingsReload flow). This method calls
SetWindowPos without SWP_NOACTIVATE. As a result the window gets
activated, the focus is set and the cursor starts blinking.
Added SWP_NOACTIVATE in all SetWindowPos calls from IslandWindow and
NoClientIslandWindow (where it was missing). Please let me know if this
is an overkill - it is not required to fix the issue, however seems a
good practice, that might help if we decide to apply more settings
immediately.
## Validation Steps Performed
* Only manual testing - please guide me to the relevant UT framework, if
exists.
* Trying to reproduce this with VS attached doesn't work - the window
gets the focus in any case.
* Tested as a standalone application, by modifying different settings
(and comparing the results before and after the fix).
* Checked with Spy++ that no WM_ACTIVATE / WM_SETFOCUS is thrown upon
settings modification
* Applied terminal resizing, toggling full screen and focus mode to
check no regression was introduced.
Closes#7571
Adds a tooltip to the new tab button and menu to let the user know
that holding alt will open a new pane instead.
Fixes#7851
Co-authored-by: Pankaj Bhojwani <pabhojwa@microsoft.com>
Adds the ability to manually handle the terminal renderer resizing
events by allowing different render size and WPF control size. This is
done by adding an `AutoFill` property to the control that prevents the
renderer from automatically resizing and tells the WPF control to fill
in the extra space with the terminal background as shown below:
This PR adds the following:
- Helper method in the DX engine to convert character viewports into
pixel viewports
- `AutoFill` property that prevents automatic resizing of the renderer
- Tweaks and fixes that automatically fill in the empty space if
`AutoFill` is set to false
- Fixes resizing methods and streamlines their codepath
## Validation Steps Performed
Manual validation with the Visual Studio Integrated Terminal tool
window.
This pull request introduces (a very, very stripped-down copy of) the
WIL fallback error reporter.
It emits error records, usually immediately before the application
implodes, into the event stream.
This should improve diagnosability of issues that take Terminal down,
and allow us to give out a .wprp file to gather traces from users.
`ScrollIntoView` is responsible for scrolling the viewport to include
the UTR's start endpoint. The crash was caused by `start` being at the
exclusive end, and attempting to scroll to it. This is now fixed by
clamping the result to the bottom of the buffer.
Most of the work here is to allow a test for this. `ScrollIntoView`
relied on a virtual `ChangeViewport` function. By making that
non-virtual, the `DummyElementProvider` in the tests can now be a
`ScreenInfoUiaProviderBase`. This opens up the possibility of more
UiaTextRange tests in the future too.
Closes#7839
This is not going to be our plan of record for Universal going forward.
This updates the Universal configuration to 1) match non-universal and 2) switch to local applications
## Summary of the Pull Request
This introduces a spec for (what I like to call) winrt TerminalSettings. Basically, we need to move over some of the code that resides in TerminalApp that relates to the settings model, then expose some of the settings objects as winrt objects. Doing so will allow us to access/modify settings across different project layers (a must-have for the Settings UI).
## References
#885 - winrt Terminal Settings issue
#1564 - spec for most of the backend work for Settings UI
## Summary of the Pull Request
Introduce the `IconPathConverter` to `TerminalApp`. `Command` and `Profile` now both return the unexpanded icon path. `IconPathConverter` is responsible for expanding the icon path and retrieving the appropriate icon source.
This also removes `Profile`'s expanded icon path and uses the `IconPathConverter` when necessary. This allows users to set profile icons to emoji as well. However, emoji do not appear in the jumplist.
## References
Based on #7667
## PR Checklist
* [X] Closes#7784
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
## Validation Steps Performed
Deploy succeeded.
#7796 and #7667 were being implemented concurrently. As a part of #7667, Command was moved from TermApp to TSM. This just applies that change to a line we missed in #7796 and fixes the build break.
## Summary of the Pull Request
This PR enables the ATS to display the active tab as the user navigates the tab switcher. We do this by dispatching the tab switch actions as the user navigates the menu, and manually _not_ focusing the new tab when the tab switcher is open.
## References
* #6732 - original tab switcher PR
* #6689 - That's a more involved, generic version of this, but this PR will be enough to stop most of the complaints hopefully
## PR Checklist
* [x] Closes#7409
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Opened tabs, tabbed through the menu, verified that it did what I'd expect
Introduces a new TerminalSettingsModel (TSM) project. This project is
responsible for (de)serializing and exposing Windows Terminal's settings
as WinRT objects.
## References
#885: TSM epic
#1564: Settings UI is dependent on this for data binding and settings access
#6904: TSM Spec
In the process of ripping out TSM from TerminalApp, a few other changes
were made to make this possible:
1. AppLogic's `ApplicationDisplayName` and `ApplicationVersion` was
moved to `CascadiaSettings`
- These are defined as static functions. They also no longer check if
`AppLogic::Current()` is nullptr.
2. `enum LaunchMode` was moved from TerminalApp to TSM
3. `AzureConnectionType` and `TelnetConnectionType` were moved from the
profile generators to their respective TerminalConnections
4. CascadiaSettings' `SettingsPath` and `DefaultSettingsPath` are
exposed as `hstring` instead of `std::filesystem::path`
5. `Command::ExpandCommands()` was exposed via the IDL
- This required some of the warnings to be saved to an `IVector`
instead of `std::vector`, among some other small changes.
6. The localization resources had to be split into two halves.
- Resource file linked in init.cpp. Verified at runtime thanks to the
StaticResourceLoader.
7. Added constructors to some `ActionArgs`
8. Utils.h/cpp were moved to `cascadia/inc`. `JsonKey()` was moved to
`JsonUtils`. Both TermApp and TSM need access to Utils.h/cpp.
A large amount of work includes moving to the new namespace
(`TerminalApp` --> `Microsoft::Terminal::Settings::Model`).
Fixing the tests had its own complications. Testing required us to split
up TSM into a DLL and LIB, similar to TermApp. Discussion on creating a
non-local test variant can be found in #7743.
Closes#885
The `MovementAtExclusiveEnd` test was improperly authored for the
following reasons:
- it should have used `TEST_METHOD_PROPERTY` to cover all of the
TextUnits
- TextUnit::Document (arguably one of the most important) was ommitted
accidentally (`!= TextUnit_Document` was used instead of `<=`)
- The created range was not `EndExclusive`, but rather, the last cell in
the buffer (`EndInclusive`)
The first half of this PR fixes the test.
The second half of this PR expands the test and fixes any related issues
to make the test pass (i.e. #7771):
- `TEST_METHOD_PROPERTY` was added for it to be degenerate (start/end at
`EndExclusive`) or not (last cell of buffer)
- `utr->_start` is now also validated after moving backwards
NOTE: `utr->_start` was not validated when moving forwards because
moving forwards should always fail when at/past the last chell in the
buffer.
Closes#7771
This commit makes the Windows Terminal play an audible sound when the
`BEL` control character is output.
The `BEL` control was already being forwarded through conpty, so it was
just a matter of hooking up the `WarningBell` dispatch method to
actually play a sound. I've used the `PlaySound` API to output the sound
configured for the "Critical Stop" system event (aka _SystemHand_),
since that is the sound used in conhost.
## Validation
I've manually confirmed that the terminal produces the expected sound
when executing `echo ^G` in a cmd shell, or `printf "\a"` in a WSL bash
shell.
References:
* There is a separate issue (#1608) to deal with configuring the `BEL`
to trigger visual forms of notification.
* There is also an issue (#2360) requesting an option to disable the
`BEL`.
Closes#4046
This performs a minor refactor on `TextBuffer::MoveToNextWord` that
relies more heavily on `TextBuffer::GetWordEnd`. Now, the logic is
simplified and looks more like `MoveToPreviousWord`.
This refactor required me to move the `lastCharPos` optimization down to
`GetWordEnd`. So word expansion gets this optimization for free now.
### WPR Traces
The percentages below represent the weight that a function call had. The
test scenario included moving by word on the CMD welcome message until
the last word was reached. Inspect.exe was used to limit any additional
calls that are generally performed by a screen reader.
| function | current | branch |
| -- | -- | -- |
| `UIA:Move` | 34.55% | 29.52% |
There is an improvement of about 5% in a release build of ConHost.
NOTE: `UIA::Move` already calls `Expand` after a move operation is
performed. I'm using this data to represent a performance improvement
across both functions.
Contributes to #5243
The WAP packaging project is sensitive to including applications that it
thinks are UWPs. The changes we made to separate WindowsStoreApp and
WindowsAppContainer weren't comprehensive enough to convince WAP that we
were not still UWPs.
Because of that, it would run sub-builds of each of these projects (and
all their dependencies) with an additional `GenerateAppxPackageOnBuild`
property set. The existence of this property caused MSBuild to think the
projects needed to be built *again*.
This fixes a bug when moving backwards by word that resulted in #7742.
This also includes...
- a minor refactor that leverages `GetWordStart` in `MoveToPreviousWord`
- additional unit tests for movement by word
- a feature test comprised of the referenced bug report
`MoveToPreviousWord()` would...
- move backwards for each whitespace character
- then, move backwards for each regular character
This would actually result in moving to the beginning of the current "word" (as defined by a11y).
We actually need to do this process twice:
- the first time gets you to the beginning of the current word
- attempt to move back by one character
- the second time gets you to the beginning of the previous word
Rather than implementing 4 while loops, we leverage `GetWordStart()` to
attempt to move to the beginning of the previous word. We call it twice
(as described above). The logic is unchanged, but we instead reuse a
function that has already undergone more testing.
To make sure this works as expected, additional unit tests were
introduced covering "MoveByWord" in the TextBuffer.
## Validation Steps Performed
Added test for repro steps.
Added unit tests for movement by word.
Closes#7742
til::static_map can't be constexpr until we move to C++20.
It can't be constexpr because std::sort isn't constexpr until then.
This poses a problem: if we start using it and treating it like a map,
we'll incur a potentially high cost in static initialization in both
code size in .text and runtime.
This commit introduces presorted_static_map, which is static_map except
that it doesn't automatically sort its keys. That's the only difference.
At this point, it's just a maplike interface to a constant array of
pairs that does a binary search. It should be used for small tables that
are used infrequently enough as to not warrant their cost in code size
or initialization time. It should also be used for tables that aren't
going to be edited much by developers (like the color table in #7578.)
Sometimes when we were sliding the viewport to fit inside the buffer, we
would end up with left > right.
That would cause us to crash down the line when rendering.
Fixes MSFT:28387423
Fixes#7744
DestListLogoUri cannot handle paths that are separated with / unless
they're actually URLs. We have to guess somewhat whether something is a
file path and if it appears to be one, normalize it.
Fixes#7706
`EndExclusive` represents the end of the buffer. This is designed to not
point to any data on the buffer. UiaTextRange would point to this
`EndExclusive` and then attempt to move based on it. However, since it
does not point to any data, it could experience undefined behavior or
(inevitably) crash from running out of bounds.
This PR specifically checks for expansion and movement at that point,
and prevents us from moving beyond it. There are plans in the future to
define the "end" as the last character in the buffer. Until then, this
solution will suffice and provide correct behavior that doesn't crash.
## Validation Steps Performed
Performed the referenced bugs' repro steps and added test coverage.
Closes MSFT-20458595
Closes#7663Closes#7664
This PR adds support for the _blink_ graphic rendition attribute. When a
character is output with this attribute set, it "blinks" at a regular
interval, by cycling its color between the normal rendition and a dimmer
shade of that color.
The majority of the blinking mechanism is encapsulated in a new
`BlinkingState` class, which is shared between the Terminal and Conhost
implementations. This class keeps track of the position in the blinking
cycle, which determines whether characters are rendered as normal or
faint.
In Windows Terminal, the state is stored in the `Terminal` class, and in
Conhost it's stored in the `CONSOLE_INFORMATION` class. In both cases,
the `IsBlinkingFaint` method is used to determine the current blinking
rendition, and that is passed on as a parameter to the
`TextAttribute::CalculateRgbColors` method when these classes are
looking up attribute colors.
Prior to calculating the colors, the current attribute is also passed to
the `RecordBlinkingUsage` method, which keeps track of whether there are
actually any blink attributes in use. This is used to determine whether
the screen needs to be refreshed when the blinking cycle toggles between
the normal and faint renditions.
The refresh itself is handled by the `ToggleBlinkingRendition` method,
which is triggered by a timer. In Conhost this is just piggybacking on
the existing cursor blink timer, but in Windows Terminal it needs to
have its own separate timer, since the cursor timer is reset whenever a
key is pressed, which is not something we want for attribute blinking.
Although the `ToggleBlinkingRendition` is called at the same rate as the
cursor blinking, we actually only want the cells to blink at half that
frequency. We thus have a counter that cycles through four phases, and
blinking is rendered as faint for two of those four. Then every two
cycles - when the state changes - a redraw is triggered, but only if
there are actually blinking attributes in use (as previously recorded).
As mentioned earlier, the blinking frequency is based on the cursor
blink rate, so that means it'll automatically be disabled if a user has
set their cursor blink rate to none. It can also be disabled by turning
off the _Show animations in Windows_ option. In Conhost these settings
take effect immediately, but in Windows Terminal they only apply when a
new tab is opened.
This PR also adds partial support for the `SGR 6` _rapid blink_
attribute. This is not used by DEC terminals, but was defined in the
ECMA/ANSI standards. It's not widely supported, but many terminals just
it implement it as an alias for the regular `SGR 5` blink attribute, so
that's what I've done here too.
## Validation Steps Performed
I've checked the _Graphic rendition test pattern_ in Vttest, and
compared our representation of the blink attribute to that of an actual
DEC VT220 terminal as seen on [YouTube]. With the right color scheme
it's a reasonably close match.
[YouTube]: https://www.youtube.com/watch?v=03Pz5AmxbE4&t=1m55sCloses#7388
Make sure we don't hide the cursor until the IME starts (#7673)
Some IME implementations do not produce composition strings, and their
users have come to rely on the cursor that conhost traditionally left on
until a composition string showed up. We shouldn't hide the cursor until
we get a string (as opposed to hiding it when composition begins) so as
to not break those IMEs.
Related to GH-6207.
Fixes MSFT-29219348
Some IME implementations do not produce composition strings, and their
users have come to rely on the cursor that conhost traditionally left on
until a composition string showed up. We shouldn't hide the cursor until
we get a string (as opposed to hiding it when composition begins) so as
to not break those IMEs.
Related to #6207.
Fixes MSFT:29219348
Currently, `CommandPalette` creates and maintains the `SwitchToTab`
commands used for the ATS. When `Command` goes into the
TerminalSettingsModel, the palette won't be able to access `Command`'s
implementation type, making it difficult for `CommandPalette` to tell
`Command` to listen to `Tab` for changes.
This PR changes the relationship up so `Tab` now manages its
`SwitchToTab` command, and `CommandPalette` just plops the command from
`Tab` into its list.
Add `ToJson()` to the `ConversionTrait`s in JsonUtils. This can be used
to serialize settings objects into JSON.
As a proof of concept, `ToJson` and `UpdateJson` were added to
`ColorScheme`.
Getters and setters for members and colors in the color table were added
and polished.
## References
#1564 - Settings UI
`ColorScheme` is a particularly easy example of serialization because it
has _no fallback_.
Added a few tests for JSON serializers.
## Summary of the Pull Request
This fixes a typo in the `HyperlinkIdConsistency` unit test which was causing that test to fail. It was mistakenly using a `/` instead of `\` for the string terminator sequences.
## References
The test initially worked because of a bug in the state machine parser, but that bug was recently fixed in PR #7340.
## PR Checklist
* [x] Closes#7654
* [x] CLA signed.
* [x] Tests passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Validation Steps Performed
I've run the test again and it now passes.
C1 control characters are now first converted to their 7 bit equivalent.
This allows us to unify the logic of C1 and C0 escape handling. This
also adds support for SOS/PM/APC string.
* Unify the logic for C1 and C0 escape handling by converting C1 to C0
beforehand. This adds support for various C1 characters, including
IND(8/4), NEL(8/5), HTS(8/8), RI(8/13), SS2(8/14), SS3(8/15),
OSC(9/13), etc.
* Add support for SOS/PM/APC escape sequences. Fixes#7032
* Use "Variable Length String" logic to unify the string termination
handling of OSC, DCS and SOS/PM/APC. This fixes an issue where OSC
action is successfully dispatched even when terminated with non-ST
character. Introduced by #6328, the DCS PassThrough is spared from
this issue. This PR puts them together and add test cases for them.
References:
https://vt100.net/docs/vt510-rm/chapter4.htmlhttps://vt100.net/emu/dec_ansi_parserCloses#7032Closes#7317
`KeyMapping` was introduced to break up `AppKeyBindings`. `KeyMapping`
records the keybindings from the JSON and lets you query them.
`AppKeyBindings` now just holds a `ShortcutActionDispatcher` to run
actions, and a `KeyMapping` to record/query your existing keybindings.
This refactor allows `KeyMapping` to be moved to the
TerminalSettingsModel, and `ShortcutActionDispatcher` and
`AppKeyBindings` will stay in TerminalApp.
`AppKeyBindings` had to be passed down to a terminal via
`TerminalSettings`. Since each settings object had its own
responsibility to update/create a `TerminalSettings` object, I moved all
of that logic to `TerminalSettings`. This helps with the
TerminalSettingsModel refactor, and makes the construction of
`TerminalSettings` a bit cleaner and more centralized.
## References
#885 - this is all in preparation for the TerminalSettingsModel
## Validation Steps Performed
- [x] Tests passed
- [X] Deployment succeeded
Clang (10) has no trouble optimizing the COLORREF conversion operator to
a simple 32-bit load with mask (!) even though it's a series of bit
shifts across multiple struct members.
MSVC (19.24) doesn't make the same optimization decision, and it emits
three 8-bit loads and some shifting.
In any case, the optimization only applies at -O2 (clang) and above.
In this commit, we leverage the spec-legality of using unions for type
conversions and the overlap of four uint8_ts and a uint32_t to make the
conversion very obvious to both compilers.
x86_64 msvc | O0 | O1 | O2
------------|----|----|--------------------
shifts | 12 | 11 | 11 (fully inlined)
union | 5 | 1 | 1 (fully inlined)
x86_64 clang | O0 | O1 | O2 + O3
-------------|----|----|--------------------
shifts | 14 | 5 | 1 (fully inlined)
union | 9 | 3 | 1 (fully inlined)
j4james brought up some concerns about til::color's minor wastefulness
in https://github.com/microsoft/terminal/pull/7578#discussion_r487355989.
This is a clear, simple transformation that saves us a few instructions
in a relatively common case, so I'm accepting a micro-optimization even
though we don't have data showing this to be a hot spot.
Now that CascadiaSettings is a WinRT object, we need to update the error
handling a bit. Making it a WinRT object limits our errors to be
hresults. So we moved all the error handling down a layer to when we
load the settings object.
- Warnings encountered during validation are saved to `Warnings()`.
- Errors encountered during validation are saved to `GetLoadingError()`.
- Deserialization errors (mainly from JsonUtils) are saved to
`GetDeserializationErrorMessage()`.
## References
#7141 - CascadiaSettings is a settings object
#885 - this makes ripping out CascadiaSettings into
TerminalSettingsModel much easier
## Validation Steps Performed
* [x] Tests passed
- [x] Deployment succeeded
- tested with invalid JSON (deserialization error)
- tested with missing DefaultProfile (validation error)
If a user clicks a link that is either invalid (cannot be parsed) or has
a scheme we do not support (like file or mailto (for now)), we open up a
dialog box telling them the issue.
References #5001
- Render hyperlinks with a dashed underline
- Render hovered hyperlinks with a solid underline
- Show URI tooltip on hover
TermControl now has a canvas that contains a tiny border to which a
tooltip is attached. When we hover over hyperlinked text, we move the
border to the mouse location and update the tooltip content with the
URI.
Introduced a new underline type (HyperlinkUnderline), supports rendering
for it, and uses it to render hyperlinks. HyperlinkUnderline is usually
a dashed underline, but when a link is hovered, all text with the same
hyperlink ID is rendered with a solid underline.
References #5001
This fixes an issue where two CPRs could end up corrupted in the input
buffer. An application that sent two CPRs back-to-back could
end up reading the first few characters of the first prepended CPR
before handing us another CPR. We would dutifully prepend it to the
buffer, causing them to overlap.
```
^[^[2;2R[1;1R
^^ ^^^^^ First CPR
^^^^^^ Second CPR
```
The end result of this corruption is that a requesting application
would receive an unbidden `R` on stdin; for vim, this would trigger
replace mode immediately on startup.
Response prepending was implemented in !997738 without much comment.
There's very little in the way of audit trail as to why we switched.
Michael believes that we wanted to make sure that applications got DSR
responses immediately. It had the unfortunate side effect of causing
subsequence CPRs across cursor moves to come out in the wrong order.
I discussed our options with him, and he suggested that we could
implement a priority queue in InputBuffer and make sure that "response"
input was dispatched to a client application before any application- or
user-generated input. This was deemed to be too much work.
We decided that DSR responses getting top billing was likely to be a
stronger guarantee than most terminals are capable of giving, and that
we should be fine if we just switch it back to append.
Thanks to @k-takata, @tekki and @brammool for the investigation on the
vim side.
Fixes#1637.
This commit leverages C++/WinRT's final_release [extension point] to
pull the final destruction of ConptyConnection off onto a background
thread.
We've been seeing some deadlocks during teardown where the output thread
(holding the last owning reference to the connection) was trying to
destruct the threadpool wait while the threadpool wait was
simultaneously running its callback and waiting for the output thread to
terminate. It turns out that trying to release a threadpool wait while
it's running a callback that's blocked on you will absolutely result in
a deadlock.
Fixes#7392.
[extension point]: https://devblogs.microsoft.com/oldnewthing/20191018-00/?p=103010
CascadiaSettings is now a WinRT object in the TerminalApp project.
## References
#7141 - CascadiaSettings is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
This one _looks_ big, but most of it is really just propagating the
changes to the tests. In fact, you can probably save yourself some time
because the tests were about an hour of Find&Replace.
`CascadiaSettings::GetCurrentAppSettings()` was only being used in
Pane.cpp. So I ripped out the 3 lines of code and stuffed them in there.
Follow-up work:
- There's a few places in AppLogic where I `get_self` to be able to get
the warnings out. This will go away in the next PR (wrapping up #885)
## Validation Steps Performed
- [x] Tests passed
- [X] Deployment succeeded
Closes#7141
By setting the jumplist entries to launch `WindowsTerminal.exe` out of
the package root, we've inadvertently made WindowsTerminalDev emit jump
list entries that launch the _unpackaged_ version of Terminal.
We can fix this by copying the code from the shell extension that
determines which version of the executable to launch -- wt, wtd or
WindowsTerminal -- depending on the context under which it was invoked.
Fixes#7554
Conhost expands UIA text ranges when moved. This means that degenerate
ranges become non-degenerate after movement, leading to odd behaviour
from UIA clients. This PR doesn't expand degenerate ranges, but rather
keeps them degenerate by moving `_end` to the newly-changed `_start`.
Tested in the NVDA Python console (cases with `setEndPoint` and
`compareEndPoints` described in #7342). Also ran the logic by
@michaeldcurran.
Closes#7342
Almost definitely addresses nvaccess/nvda#11288 (although I'll need to
test with my Braille display). Also fixes an issue privately reported to
me by @simon818 with copy/paste from review cursor which originally lead
me to believe the issue was with `moveEndPointByRange`.
This PR is about the behavior of DECSCUSR. This PR changes the meaning
of DECSCUSR 0 to restore the cursor style back to user default. This
differs from what VT spec says but it’s used in popular terminal
emulators like iTerm2 and VTE-based ones. See #1604.
Another change is that for parameter greater than 6, DECSCUSR should be
ignored, instead of restoring the cursor to legacy. This PR fixes it.
See #7382.
Fixes#1604.
This commit introduces Jumplist customization and an item for each
profile to the Jumplist. Selecting an entry in the jumplist will pretty
much just execute `wt.exe -p "{profile guid}"`, and so a new Terminal
will open with the selected profile.
Closes#576
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp dd0c54d9abd94dea1ffe956373a4c20b30a6151e
Related work items: MSFT-26187783
When attempting to select a text range from a different text buffer (such as a standard text range when in alt mode), conhost crashes. This PR checks for this case and returns `E_FAIL` instead, preventing this crash.
## PR Checklist
* [x] Closes unfiled crash issue
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Passes manual test below
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Ran the following lines in the NVDA Python console (NVDA+control+z) before and after this PR, and observed that Conhost no longer crashes after the change:
``` Python console
>>> # SSH to a remote Linux system
>>> ti=nav.makeTextInfo("caret")
>>> ti.move("line", -2)
-2
>>> # Switch away from the NVDA Python console, and run Nano in conhost. Then:
>>> ti.updateSelection() # Calls select() on the underlying UIA text range
Traceback (most recent call last):
File "<console>", line 1, in <module>
File "NVDAObjects\UIA\__init__.pyc", line 790, in updateSelection
File "comtypesMonkeyPatches.pyc", line 26, in __call__
_ctypes.COMError: (-2147220991, 'An event was unable to invoke any of the subscribers', (None, None, None, 0, None))
```
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Conhost can now support OSC8 sequences (as specified [here](https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda)). Terminal also supports those sequences and additionally hyperlinks can be opened by Ctrl+LeftClicking on them.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#204
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#204
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Added support to:
- parse OSC8 sequences and extract URIs from them (conhost and terminal)
- add hyperlink uri data to textbuffer/screeninformation, associated with a hyperlink id (conhost and terminal)
- attach hyperlink ids to text to allow for uri extraction from the textbuffer/screeninformation (conhost and terminal)
- process ctrl+leftclick to open a hyperlink in the clicked region if present
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Open up a PowerShell tab and type
```PowerShell
${ESC}=[char]27
Write-Host "${ESC}]8;;https://github.com/microsoft/terminal${ESC}\This is a link!${ESC}]8;;${ESC}\"
```
Ctrl+LeftClick on the link correctly brings you to the terminal page on github
GlobalAppSettings is now a WinRT object in the TerminalApp project.
## References
#7141 - GlobalAppSettings is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
## PR Checklist
* [x] Tests passed
## Detailed Description of the Pull Request / Additional comments
This one was probably the easiest thus far.
The only weird thing is how we handle InitialPosition. Today, we lose a
little bit of fidelity when we convert from LaunchPosition (int) -->
Point (float) --> RECT (long). The current change converts
LaunchPosition (optional<long>) --> InitialPosition (long) --> RECT
(long).
NOTE: Though I could use LaunchPosition to go directly from TermApp to
AppHost, I decided to introduce InitialPosition because LaunchPosition
will be a part of TerminalSettingsModel soon.
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
Profile is now a WinRT object in the TerminalApp project.
As with ColorScheme, all of the serialization logic is not exposed via
the idl. TerminalSetingsModel will handle it when it's all moved over.
I removed the "Get" and "Set" prefixes from all of the Profile
functions. It just makes more sense to use the `GETSET_PROPERTY` macro
to do most of the work for us.
`CloseOnExitMode` is now an enum off of the Profile.idl.
`std::optional<wstring>` got converted to `hstring` (as opposed to
`IReference<hstring>`). `IReference<hstring>` is not valid to MIDL.
## References
#7141 - Profile is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
Closes#7435
Dustin L. Howett
* Clear the last error before calling Mb2Wc in ConvertToW (GH-7391)
* Update clang-format to 10.0 (GH-7389)
* Add til::static_map, a constexpr key-value store (GH-7323)
James Holderness
* Refactor VT control sequence identification (CC-7304)
Mike Griese
* Compensate for VS 16.7, part 2 (GH-7383)
* Add support for iterable, nested commands (GH-6856)
Michael Niksa
* Helix Testing (GH-6992)
* Compensate for new warnings and STL changes in VS 16.7 (GH-7319)
nathpete-msft
* Fix environment block creation (GH-7401)
Chester Liu
* Add initial support for VT DCS sequences (CC-6328)
Related work items: #28791050
## Summary of the Pull Request
The `index` action argument is now optional for `closeOtherTabs` and `closeTabsAfter`. When `index` is not defined, `index` is set to the focused tab's index.
Also, adds the non-index version of these actions to defaults.json.
## PR Checklist
* [X] Closes#7181
* [X] CLA signed
* [X] Tests passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [X] Schema updated.
## Validation Steps Performed
Opened 4 tabs and ran closeOtherTabs/closeTabsAfter from command palette.
This fixes a regression in environment variable loading introduced as part
of the new environment block creation that prevents some system-defined,
volatile environment variables from being defined.
## References
https://github.com/microsoft/terminal/pull/7243#discussion_r476603599
## Validation Steps Performed
Manually verified locally.
Closes#7399
## Summary of the Pull Request
Previously, if `altGrAliasing` was disabled, all `Ctrl+Alt` combinations were considered to be aliases of `AltGr` including `AltGr` itself and thus considered as key and not character events. But `AltGr` should not be treated as an alias of itself of course, as that prevents one from entering `AltGr` combinations entirely.
## PR Checklist
* [x] Closes#7372
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Activate a German keyboard layout
* Run `showkey -a` in WSL
* **Ensure** that `AltGr+Q` produces `@`
* **Ensure** that `Ctrl+Alt+Q` produces `@`
* Disable `altGrAliasing`
* **Ensure** that `AltGr+Q` produces `@`
* **Ensure** that `Ctrl+Alt+Q` produces `^[^Q`
When the console functional tests are running on OneCoreUAP, the
newly-introduced (65bd4e327, #4309) FillOutputCharacterA tests will
actually fail because of radio interference on the return value of GLE.
Fixes MSFT-28163465
This commit removes our local copy of clang-format 8 and replaces it
with a newly-built nuget package containing clang-format 10.
This resolves the inconsistency between our version of clang-format and
the one shipped in Visual Studio.
A couple minor format changes were either required or erroneously forced
upon us--chief among them is a redistribution of `*`s around SAL
annotations in inline class members of COM classes. Don't ask why; I
couldn't figure it out.
We had some aspirational goals for our formatting, which were left in
but commented out. Enabling them changes our format a little more than
I'm comfortable with, so I uncommented them and locked them to the
format style we've been using for the past year. We may not love it, but
our aspirations may not matter here any longer. Consistent formatting is
better than perfect formatting.
Most applications with scrollable content seem to define the "large
jump" distance as about a screenful of content. You can see this in long
pages in Settings and documents in Notepad.
We just weren't configuring ScrollBar here.
Fixes#7367
## Summary of the Pull Request
Adds support for "commandline mode" to the command palette.
This allows the user to start typing a `wt.exe` commandline directly in the command palette, to run that commandline directly in the current window. This allows the user input something like `> nt -p Ubuntu ; sp -p ssh` and open up a new tab and split it _in the current window_.
## References
* cmdpal megathread: #5400
* Kinda related to #4472
* built with the `wt` action from #6537
## PR Checklist
* [x] Closes#6677
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - sure does, when the cmdpal docs are written in the first place :P
## Validation Steps Performed
Tested manually
## Summary of the Pull Request
Adds support for setting a command's `icon`. This supports a couple different scenarios:
* setting a path to an image
* on `"iterateOn": "profiles"` commands, setting the icon to `${profile.icon}` (to use the profile's icon)
* setting the icon to a symbol from [Segoe MDL2 Assets](https://docs.microsoft.com/en-us/windows/uwp/design/style/segoe-ui-symbol-font)
* setting the icon to an emoji
* setting the icon to a character (what is an emoji other than a character, after all?)
## References
* Big s/o to @leonMSFT in #6732, who really did all the hard work here.
## PR Checklist
* [x] Closes#6644
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Importantly, the creation of these icons must occur on the UI thread. That's why it's done in a "load the path from json", then "get the actual IconSource" structure.
## Validation Steps Performed
see the gif
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR splits the anchored and unanchored tab switcher into two. The anchored tab switcher is now baked into `nextTab`/`prevTab`, and the unanchored tab switcher command is just named `tabSearch`. `tabSearch` takes no arguments. To reflect this distinction, `CommandPalette.cpp` now refers to one as `TabSwitchMode` and the other as `TabSearchMode`.
I've added a global setting named `useTabSwitcher` (name up for debate) that makes the Terminal use the anchored tab switcher experience for `nextTab` and `prevTab`.
I've also given the control the ability to detect <kbd>Alt</kbd> KeyUp events and to dispatch keybinding events. By listening for keybindings, the ATS can react to `nextTab`/`prevTab` invocations for navigation in addition to listening for <kbd>tab</kbd> and the arrow keys.
Closes#7178
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] CLA signed.
* [x] Documentation updates: microsoftdocs/terminal#107
* [x] Schema updated.
## Summary of the Pull Request
Adds a pair of top-level commands that both have nested, iterable sub-commands. The "New Tab..." command has one child for each profile, and will open a new tab for that profile. The "Split Pane..." command similarly has a nested command for each profile, and also has a nested command for split auto/horizontal/vertical.
## References
* megathread: #5400
* Would look better with icons from #6644
## PR Checklist
* [x] Closes#7174
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
The easiest fix was actually just moving all the source files from
`TerminalApp` to `TerminalApp/lib`, where the appropriate `pch.h`
actually resides.
Closes#6866
In #6532, we thought it would be a good idea to add "bindings" as an
overload for "keybindings", as we were no longer going to use the
keybindings array for just keybindings. We were going to add commands.
So we started secretly treating `"bindings"` the same as
`"keybindings"`.
Then, in #7175, we discussed using "actions" as the key for the list of
commands/keybindings/global actions, instead of using "bindings". We're
going to be using this array as the global list of all actions, so it
makes sense to just call it `"actions"`.
This PR renames "bindings" to "actions". Fortunately, we never
documented the "bindings" overload in the first place, so we can get
away with this safely, and preferably before we ship "bindings" for too
long.
References #6899
#6989 forgot to add `togglePaneZoom` to the schema, so this does that.
WHILE I'M HERE:
* The action names in the schema and the actual source were both in _random_ order, so I sorted them alphabetically.
* I also added an unbound `togglePaneZoom` command to defaults.json, so users can use that command from the cmdpal w/o binding it manually.
Activating a template doesn't actually process conditions. Only jobs, stages, and tasks can process a condition. So specify the full condition in the parent template call as a parameter and ask the child job (who can actually evaluate the condition) to use that parameter to determine if it should run.
## Summary of the Pull Request
Allows for creating commands that iterate over the user's color schemes. Also adds a top-level nested command to `defaults.json` that allows the user to select a color scheme (pictured above). I'm not sure there are really any other use cases that make sense, but it _really_ makes sense for this one.
## References
* #5400 - cmdpal megathread
* made possible by #6856, _and support from viewers like you._
* All this is being done in pursuit of #6689
## PR Checklist
* [x] Closes wait what? I could have swore there was an issue for this one...
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - okay maybe now I'll write some docs
## Detailed Description of the Pull Request / Additional comments
Most of the hard work for this was already done in #6856. This is just another thing to iterate over.
## Validation Steps Performed
* Played with this default command. It works great.
* Added tests.
Adds the ability to set the selection background opacity when setting the
selection background. This also exposes the selection background and alpha
through the terminal WPF container.
## Summary of the Pull Request
* Add a chevron for nested commands
* Add the text of the parent command when entering a child command
## References
## PR Checklist
* [x] Closes#7265
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
_look at that gif_
This PR changes the way VT control sequences are identified and
dispatched, to be more efficient and easier to extend. Instead of
parsing the intermediate characters into a vector, and then having to
identify a sequence using both that vector and the final char, we now
use just a single `uint64_t` value as the identifier.
The way the identifier is constructed is by taking the private parameter
prefix, each of the intermediate characters, and then the final
character, and shifting them into a 64-bit integer one byte at a time,
in reverse order. For example, the `DECTLTC` control has a private
parameter prefix of `?`, one intermediate of `'`, and a final character
of `s`. The ASCII values of those characters are `0x3F`, `0x27`, and
`0x73` respectively, and reversing them gets you 0x73273F, so that would
then be the identifier for the control.
The reason for storing them in reverse order, is because sometimes we
need to look at the first intermediate to determine the operation, and
treat the rest of the sequence as a kind of sub-identifier (the
character set designation sequences are one example of this). When in
reverse order, this can easily be achieved by masking off the low byte
to get the first intermediate, and then shifting the value right by 8
bits to get a new identifier with the rest of the sequence.
With 64 bits we have enough space for a private prefix, six
intermediates, and the final char, which is way more than we should ever
need (the _DEC STD 070_ specification recommends supporting at least
three intermediates, but in practice we're unlikely to see more than
two).
With this new way of identifying controls, it should now be possible for
every action code to be unique (for the most part). So I've also used
this PR to clean up the action codes a bit, splitting the codes for the
escape sequences from the control sequences, and sorting them into
alphabetical order (which also does a reasonable job of clustering
associated controls).
## Validation Steps Performed
I think the existing unit tests should be good enough to confirm that
all sequences are still being dispatched correctly. However, I've also
manually tested a number of sequences to make sure they were still
working as expected, in particular those that used intermediates, since
they were the most affected by the dispatch code refactoring.
Since these changes also affected the input state machine, I've done
some manual testing of the conpty keyboard handling (both with and
without the new Win32 input mode enabled) to make sure the keyboard VT
sequences were processed correctly. I've also manually tested the
various VT mouse modes in Vttest to confirm that they were still working
correctly too.
Closes#7276
Use the Helix testing orchestration framework to run our Terminal LocalTests and Console Host UIA tests.
## References
#### Creates the following new issues:
- #7281 - re-enable local tests that were disabled to turn on Helix
- #7282 - re-enable UIA tests that were disabled to turn on Helix
- #7286 - investigate and implement appropriate compromise solution to how Skipped is handled by MUX Helix scripts
#### Consumes from:
- #7164 - The update to TAEF includes wttlog.dll. The WTT logs are what MUX's Helix scripts use to track the run state, convert to XUnit format, and notify both Helix and AzDO of what's going on.
#### Produces for:
- #671 - Making Terminal UIA tests is now possible
- #6963 - MUX's Helix scripts are already ready to capture PGO data on the Helix machines as certain tests run. Presuming we can author some reasonable scenarios, turning on the Helix environment gets us a good way toward automated PGO.
#### Related:
- #4490 - We lost the AzDO integration of our test data when I moved from the TAEF/VSTest adapter directly back to TE. Thanks to the WTTLog + Helix conversion scripts to XUnit + new upload phase, we have it back!
## PR Checklist
* [x] Closes#3838
* [x] I work here.
* [x] Literally adds tests.
* [ ] Should I update a testing doc in this repo?
* [x] Am core contributor. Hear me roar.
* [ ] Correct spell-checking the right way before merge.
## Detailed Description of the Pull Request / Additional comments
We have had two classes of tests that don't work in our usual build-machine testing environment:
1. Tests that require interactive UI automation or input injection (a.k.a. require a logged in user)
2. Tests that require the entire Windows Terminal to stand up (because our Xaml Islands dependency requires 1903 or later and the Windows Server instance for the build is based on 1809.)
The Helix testing environment solves both of these and is brought to us by our friends over in https://github.com/microsoft/microsoft-ui-xaml.
This PR takes a large portion of scripts and pipeline configuration steps from the Microsoft-UI-XAML repository and adjusts them for Terminal needs.
You can see the source of most of the files in either https://github.com/microsoft/microsoft-ui-xaml/tree/master/build/Helix or https://github.com/microsoft/microsoft-ui-xaml/tree/master/build/AzurePipelinesTemplates
Some of the modifications in the files include (but are not limited to) reasons like:
- Our test binaries are named differently than MUX's test binaries
- We don't need certain types of testing that MUX does.
- We use C++ and C# tests while MUX was using only C# tests (so the naming pattern and some of the parsing of those names is different e.g. :: separators in C++ and . separators in C#)
- Our pipeline phases work a bit differently than MUX and/or we need significantly fewer pieces to the testing matrix (like we don't test a wide variety of OS versions).
The build now runs in a few stages:
1. The usual build and run of unit tests/feature tests, packaging verification, and whatnot. This phase now also picks up and packs anything required for running tests in Helix into an artifact. (It also unifies the artifact name between the things Helix needs and the existing build outputs into the single `drop` artifact to make life a little easier.)
2. The Helix preparation build runs that picks up those artifacts, generates all the scripts required for Helix to understand the test modules/functions from our existing TAEF tests, packs it all up, and queues it on the Helix pool.
3. Helix generates a VM for our testing environment and runs all the TAEF tests that require it. The orchestrator at helix.dot.net watches over this and tracks the success/fail and progress of each module and function. The scripts from our MUX friends handle installing dependencies, making the system quiet for better reliability, detecting flaky tests and rerunning them, and coordinating all the log uploads (including for the subruns of tests that are re-run.)
4. A final build phase is run to look through the results with the Helix API and clean up the marking of tests that are flaky, link all the screenshots and console output logs into the AzDO tests panel, and other such niceities.
We are set to run Helix tests on the Feature test policy of only x64 for now.
Additionally, because the set up of the Helix VMs takes so long, we are *NOT* running these in PR trigger right now as I believe we all very much value our 15ish minute PR turnaround (and the VM takes another 15 minutes to just get going for whatever reason.) For now, they will only run as a rolling build on master after PRs are merged. We should still know when there's an issue within about an hour of something merging and multiple PRs merging fast will be done on the rolling build as a batch run (not one per).
In addition to setting up the entire Helix testing pipeline for the tests that require it, I've preserved our classic way of running unit and feature tests (that don't require an elaborate environment) directly on the build machines. But with one bonus feature... They now use some of the scripts from MUX to transform their log data and report it to AzDO so it shows up beautifully in the build report. (We used to have this before I removed the MStest/VStest wrapper for performance reasons, but now we can have reporting AND performance!) See https://dev.azure.com/ms/terminal/_build/results?buildId=101654&view=ms.vss-test-web.build-test-results-tab for an example.
I explored running all of the tests on Helix but.... the Helix setup time is long and the resources are more expensive. I felt it was better to preserve the "quick signal" by continuing to run these directly on the build machine (and skipping the more expensive/slow Helix setup if they fail.) It also works well with the split between PR builds not running Helix and the rolling build running Helix. PR builds will get a good chunk of tests for a quick turn around and the rolling build will finish the more thorough job a bit more slowly.
## Validation Steps Performed
- [x] Ran the updated pipelines with Pull Request configuration ensuring that Helix tests don't run in the usual CI
- [x] Ran with simulation of the rolling build to ensure that the tests now running in Helix will pass. All failures marked for follow on in reference issues.
This is based on (cribbed almost directly from) code written by the
inimitable @StephanTLavavej on one of our mailing lists.
This is a nice generic version of the approach used in
JsonUtils::EnumMapper and CodepointWidthDetector: a static array of
key-value pairs that we binary-search at runtime (or at compile time, as
the case may be.)
Keys are not required to be sorted, as we're taking advantage of
constexpr std::sort (VS 16.6+) to get the compiler to do it for us. How
cool is that?
static_map presents an operator[] or at much like
std::map/std::unordered_map does.
I've added some tests, but they're practically fully-solveable at compile
time so they pretty much act like `VERIFY_IS_TRUE(true)`.
- Add MENU key with "menu" "app" as key bindings.
- Updated profiles.schema.json and documentation.
## Validation Steps Performed
Ran tests locally.
Tested out the new key binding.
```{ "command": "openNewTabDropdown", "keys": "app" }```
Closes#7144
New warnings were added in VS 16.7 and `std::map::erase` is now `noexcept`.
Update our code to be compatible with the new enforcement.
## PR Checklist
* [x] Closes broken audit in main after Agents updated over the weekend.
* [x] I work here.
* [x] Audit mode passes now
* [x] Am core contributor.
## Validation Steps Performed
* [x] Ran audit mode locally
As the title suggests, this commit adds initial support for the VT DCS
sequences. The parameters are parsed but not yet used. The pass through
data is yet to be handled. This effectively fixes#120 by making Sixel
graphics sequences *ignored* instead of printed.
* https://vt100.net/docs/vt510-rm/chapter4.html
* https://vt100.net/emu/dec_ansi_parser
Tests added.
References #448Closes#120
Adds array support for the existing `copyFormatting` global setting.
This allows users to define which formats they would specifically like
to be copied.
A boolean value is still accepted and is translated to the following:
- `false` --> `"none"` or `[]`
- `true` --> `"all"` or `["html", "rtf"]`
This also adds `copyFormatting` as a keybinding arg for `copy`. As with
the global setting, a boolean value and array value is accepted.
CopyFormat is a WinRT enum where each accepted format is a flag.
Currently accepted formats include `html`, and `rtf`. A boolean value is
accepted and converted. `true` is a conjunction of all the formats.
`false` only includes plain text.
For the global setting, `null` is not accepted. We already have a
default value from before so no worries there.
For the keybinding arg, `null` (the default value) means that we just do
what the global arg says to do. Overall, the `copyFormatting` keybinding
arg is an override of the global setting **when using that keybinding**.
References #5212 - Spec for formatted copying
References #2690 - disable html copy
Validated behavior with every combination of values below:
- `copyFormatting` global: { `true`, `false`, `[]`, `["html"]` }
- `copyFormatting` copy arg:
{ `null`, `true`, `false`, `[]`, `[, "html"]`}
Closes#4191Closes#5262
ColorScheme is now a WinRT object.
All of the JSON stuff can't be exposed via the idl. So the plan here is
that we'll have the TerminalSettingsModel project handle all of the
serialization when it's moved over. These functions will be exposed off
of the `implementation` namespace, not projected namespace.
References #7141 - ColorScheme is a settings object
References #885 - this new settings object will be moved to a new
TerminalSettingsModel project
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
#7145 introduced a check so that we wouldn't dispatch keys unless they
actually had a scancode. Our synthetic events actually _didn't_ have
scancodes. Not because they couldn't--just because they didn't.
Fixes#7297
## Summary of the Pull Request
This PR adds support for both _nested_ and _iterable_ commands in the Command palette.
* **Nested commands**: These are commands that include additional sub-commands. When the user selects on of these, the palette will update to only show the nested commands.
* **Iterable commands**: These are commands what allow the user to define only a single command, which is repeated once for every profile. (in the future, also repeated for color schemes, themes, etc.)
The above gif uses the following json:
```json
{
"name": "Split Pane...",
"commands": [
{
"iterateOn": "profiles",
"name": "Split with ${profile.name}...",
"commands": [
{ "command": { "action": "splitPane", "profile": "${profile.name}", "split": "automatic" } },
{ "command": { "action": "splitPane", "profile": "${profile.name}", "split": "vertical" } },
{ "command": { "action": "splitPane", "profile": "${profile.name}", "split": "horizontal" } }
]
}
]
},
```
## References
## PR Checklist
* [x] Closes#3994
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - Sure does, but we'll finish polishing this first.
## Detailed Description of the Pull Request / Additional comments
We've now gotta keep the original json for a command around, so that once we know what all the profiles will be, we can expand the commands that need it.
We've also got to parse commands recursively, because they might have any number of child commands.
These together made the command parsing a _lot_ more complicated, but it feels good so far.
## Validation Steps Performed
* wrote a bunch of tests
* Played with it a bunch
Removes the if-statement in `UpdateTabIndices` that blocks all scenarios where you delete the second to last tab. This fixes the issue where the ATS gets confused about which item in the ListView is associated with which tab.
Closes#7278
This is a minor fix from #6989. If there's only one pane in the
Terminal, then we'd still "zoom" it and give it a border, but all the
borders would be black.
A single pane is already "zoomed", so it doesn't really make sense to
try and zoom if there's only one.
Whoops, members are zero initialized in Debug builds but most likely not
in Release builds So, this PR adds a couple of default values to
`_currentMode` and its associated XAML strings to make cmdpal/ats work
deterministically on first use. I also added a default value to
`_anchorKey` just to be safe.
Closes#7254
Carlos Zamora (1)
* Pass mouse button state into HandleMouse instead of asking win32 (GH-6765)
James Holderness (1)
* Add support for the "doubly underlined" graphic rendition attribute (CC-7223)
Moshe Schorr (1)
* Batch RTL runs to ensure proper draw order (CC-7190)
Related work items: MSFT-28385436
## Summary of the Pull Request
This PR enables users to send arbitrary text input to the shell via a keybinding.
## PR Checklist
* [x] Closes#3799
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #3799
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
Added the following keybindings:
```json
{ "keys": "p", "command": { "action": "sendInput", "input": "foobar" } },
{ "keys": "q", "command": { "action": "sendInput", "input": "\u001b[A" } },
```
Ensured that when pressing <kbd>P</kbd> "foobar" is echoed to the shell and when pressing <kbd>Q</kbd> the shell history is being navigated backwards.
* This is a mini-spec for how I see this working
* good bot
* These were some typos
* Addd a future consideration about the command palette and commands
* Update spec to reflect discussion with Carlos
* update spec to reflect investigations in Command Palette Addenda 1
* add references to #6899, and minor bits of review feedback
* add `remainingProfiles` as a way of adding all the user's other profiles quickly to the menu as well
* clarify why we're not doing it in the profiles list
* no two commits do not contain a misspelling of separate
## Summary of the Pull Request
⚠️ This spec has been moved from #6902. That version was branched off the new tab menu customization, and had a terribly convoluted git history. After discussion with the team, we've decided that it's best that this spec is merged atomically _first_, and used as the basis for #5888, as opposed to the other way around.
> This document is intended to serve as an addition to the [Command Palette Spec],
> as well as the [New Tab Menu Customization Spec].
>
> As we come to rely more on actions being a mechanism by which the user defines
> "do something in the Terminal", we'll want to make it even easier for users to
> re-use the actions that they've already defined, as to reduce duplicated json as
> much as possible. This spec proposes a mechanism by which actions could be
> uniquely identifiable, so that the user could refer to bindings in other
> contexts without needing to replicate an entire json blob.
>
## PR Checklist
* [x] Specs: #6899
* [x] References: #1571, #1912, #3337, #5025, #5524, #5633
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
[Command Palette Spec]: https://github.com/microsoft/terminal/blob/master/doc/specs/%232046%20-%20Command%20Palette.md
[New Tab Menu Customization Spec]: https://github.com/microsoft/terminal/blob/master/doc/specs/%231571%20-%20New%20Tab%20Menu%20Customization.md
This commit ensures that we always furnish a new process with the
cleanest, most up-to-date environment variables we can. There is a minor
cost here in that WT will no longer pass environment variables that it
itself inherited to its child processes.
This could be considered a reasonable sacrifice. It will also remove
somebody else's TERM, TERM_PROGRAM and TERM_PROGRAM_VERSION from the
environment, which could be considered a win.
I validated that GetCurrentProcessToken returns a token we're
_technically able_ to use with this API; it is roughly equivalent to
OpenProcessToken(GetCurrentProcess) in that it returns the current
active _access token_ (which is what CreateEnvironmentBlock wants.)
There's been discussion about doing a 3-way merge between WT's
environment and the new one. This will be complicated and I'd like to
scream test the 0-way merge first ;P
Related to #1125 (but it does not close it or resolve any of the other
issues it calls out.)
Fixes#7239Fixes#7204 ("App Paths" value creeping into wt's environment)
This regressed around the #7163 timeframe.
We're discussing this on chat currently. It might break the intellisense
on the `#include <winrt/Microsoft.Terminal.TerminalControl.h>` line in
VS 16.7, but we're not _really_ sure? Intellisense has been notoriously
flaky for us.
I'm running 16.6.5, and it works for me. @lhecker is running 16.7 and
confirmed it worked there. If the CI build passes, then this definitely
will work for 16.7.
This script takes a range of commits and generates a commit log with the
git2git-excluded file changes filtered out.
It also replaces GitHub issue numbers with GH-XXX so as to not confuse
Git2Git or Azure DevOps. Community contributions are tagged with CC- so
they can be detected later.
The output looks like this:
```
Carlos Zamora (2)
* Pass mouse button state into HandleMouse instead of asking win32 (GH-6765)
Dustin L. Howett (6)
* Disable MinimalCoreWin when OpenConsoleUniversalApp is false (GH-7203)
James Holderness (1)
* Add support for the "doubly underlined" graphic rendition attribute (CC-7223)
```
Yes, the numbers are wrong. No, it doesn't really matter.
If you scroll up to view the scrollback, then we want the viewport to
"stay in place", as new output comes in (see #6062). This works fine up
until the buffer circles. In this case, the mutable viewport isn't
actually moving, so we never set `updatedViewport` to true.
This regressed in #6062Closes#7222
This pull request completes (and somewhat rewrites) the JsonUtils error
handling arc. Deserialization errors, no longer represented by trees of
exceptions that must be rethrown and caught, are now transformed at
catch time into a message explaining what we expected and where we
expected it.
Instead of exception trees, a deserialization failure will result in a
single type of exception with the originating JSON object from which we
can determine the contents and location of the failure.
Because most of the error message actually comes from the JSON schema
or the actual supported types, and the other jsoncpp errors are not
localized I've made the decision to **not** localize these messages.
## Summary of the Pull Request
This PR adds the Advanced Tab Switcher (ATS) to Terminal. It'll work
similarly to VSCode's tab switcher. Because this implementation rides
off a lot of the Command Palette's XAML code, it'll look just like the
Command Palette, and also have support for tab title search.
## References
#3753 - ATS Spec
Closes#1502
The "default profile as name" feature in 1.1 broke the loading of
default settings, as we would never get to the validation phase where
the default profile string was transformed into a guid.
I moved knowledge of the "unparsed default profile" optional to the
consumer so that we could make sure we only attempted to deserialize it
once (and only if it was present.)
Fixes#7236.
## PR Checklist
* [x] Closes#7236
## Summary of the Pull Request
We're expecting that people have treated `padding` as an integer, and the type-based converter is too strict for that. This PR widens its scope and explicitly allows for it in the schema.
## PR Checklist
* [x] Closes#7234
This PR adds support for the ANSI _doubly underlined_ graphic rendition
attribute, which is enabled by the `SGR 21` escape sequence.
There was already an `ExtendedAttributes::DoublyUnderlined` flag in the
`TextAttribute` class, but I needed to add `SetDoublyUnderlined` and
`IsDoublyUnderlined` methods to access that flag, and update the
`SetGraphicsRendition` methods of the two dispatchers to set the
attribute on receipt of the `SGR 21` sequence. I also had to update the
existing `SGR 24` handler to reset _DoublyUnderlined_ in addition to
_Underlined_, since they share the same reset sequence.
For the rendering, I've added a new grid line type, which essentially
just draws an additional line with the same thickness as the regular
underline, but slightly below it - I found a gap of around 0.05 "em"
between the lines looked best. If there isn't enough space in the cell
for that gap, the second line will be clamped to overlap the first, so
you then just get a thicker line. If there isn't even enough space below
for a thicker line, we move the offset _above_ the first line, but just
enough to make it thicker.
The only other complication was the update of the `Xterm256Engine` in
the VT renderer. As mentioned above, the two underline attributes share
the same reset sequence, so to forward that state over conpty we require
a slightly more complicated process than with most other attributes
(similar to _Bold_ and _Faint_). We first check whether either underline
attribute needs to be turned off to send the reset sequence, and then
check individually if each of them needs to be turned back on again.
## Validation Steps Performed
For testing, I've extended the existing attribute tests in
`AdapterTest`, `VTRendererTest`, and `ScreenBufferTests`, to make sure
we're covering both the _Underlined_ and _DoublyUnderlined_ attributes.
I've also manually tested the `SGR 21` sequence in conhost and Windows
Terminal, with a variety of fonts and font sizes, to make sure the
rendering was reasonably distinguishable from a single underline.
Closes#2916
## Summary of the Pull Request
Adds the `setColorScheme` action, to change the color scheme of the active control to one given by the `name` parameter. `name` is required. If `name` is not the name of a color scheme, the action does nothing.
## References
* Being done as a stepping stone to #6689
## PR Checklist
* [x] Closes#5401
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Technically, the action is being done by changing the settings of the current `TerminalSettings` of the `TermControl`. Frankly, it should be operating on a copy of the `TermControl`'s `IControlSettings`, then updating the control's settings, or the Control should just listen for changes to it's setting's properties, and update in real time (without a manual call to `UpdateSettings`. However, both those paths are somewhere unknowable beyond #6904, so we'll just do this for now.
## Validation Steps Performed
* tested manually with a scheme that exists
* tested manually with a scheme that doesn't exist
MouseInput was directly asking user32 about the state of the mouse buttons,
which was somewhat of a layering violation. This commit makes all callers
have to pass the mouse state in themselves.
Closes#4869
This PR adds the `togglePaneZoom` action, which can be used to make a
pane expand to fill the entire contents of the window. A tab that
contains a zoomed pane will have a magnifying glass icon prepended
to its title. Any attempts to manage panes with one zoomed will force
the zoomed pane back to normal size.
VALIDATION
Zoomed in and out a bunch. Tried closing panes while zoomed. Tried
splitting panes while zoomed. Etc.
Closes#996
This PR adds support for per-profile tab colors, in accordance with
#7134. This adds a single `tabColor` property, that when set, specifies
the background color for profile's tab. This color can be overridden by
the color picker, and clearing the color with the color picker will
revert to this default color set for the tab.
* Full theming is covered in #3327 & #5772
Validation: Played with setting this color, both on launch and via
hot-reload
Specified in #7134Closes#1337
Consecutive RTL GlyphRuns are drawn from the last to the first.
References
#538, #7149, all those issues asking for RTL closed as dupes.
As @miniksa suggested in a comment on #7149 -- handle the thingy on the
render side.
If we have GlyphRuns abcdEFGh, where EFG are RTL, we draw them now in
order abcdGFEh.
This has ransom-noting, because I didn't touch the font scaling at all.
This should fix the majority of RTL issues, except it *doesn't* fix
issues with colors, because those get split in the TextBuffer phase in
the renderer I think, so they show up separately by the GlyphRun phase.
## Summary of the Pull Request
Move `ICoreSettings` and `IControlSettings` from the TerminalSettings project to the TerminalCore and TerminalControl projects respectively. Also entirely removes the TerminalSettings project.
The purpose of these interfaces is unchanged. `ICoreSettings` is used to instantiate a terminal. `IControlSettings` (which requires an `ICoreSettings`) is used to instantiate a UWP terminal control.
## References
Closes#7140
Related Epic: #885
Related Spec: #6904
## PR Checklist
* [X] Closes#7140
* [X] CLA signed
* [X] Tests ~added~/passed (no additional tests necessary)
* [X] ~Documentation updated~
* [X] ~Schema updated~
## Detailed Description of the Pull Request / Additional comments
A lot of the work here was having to deal with winmd files across all of these projects. The TerminalCore project now outputs a Microsoft.Terminal.TerminalControl.winmd. Some magic happens in TerminalControl.vcxproj to get this to work properly.
## Validation Steps Performed
Deployed Windows Terminal and opened a few new tabs.
This fixes the build the rest of the way in VS 16.7. Something about the
way we were using the Store/Container flags caused some of our projects
to end up linking kernel32.lib only (MinimalCoreWin==KernelOnly).
The best way to solve it once and for all is to make sure MinimalCoreWin
is always set.
References 313568d0e5.
## Summary of the Pull Request
Adds support for two actions, `closeOtherTabs` and `closeTabsAfter`. Both these actions accept an `index` parameter.
* `closeOtherTabs`: Close tabs other than `index`
* `closeTabsAfter`: Close tabs after `index` (This is also "Close tabs to the right")
## References
* This PR is being made to unblock @RahulRavishankar in #1912
## PR Checklist
* [x] I work here
* [ ] Tests added/passed
* [x] Requires documentation to be updated
* [ ] We should file an issue for "add an `index` param to `closeTab`" to add similar support to the close tab action
* [ ] We should file an issue for "make the `index` param to `closeOtherTabs`, `closeTabsAfter` optional" to make them both work on the _active_ tab when there's no `index` provided
## Validation Steps Performed
* _Verified that_ closing all tabs when I have the `index`'th tab selected _works as expected_
* _Verified that_ closing all tabs when I have a tab other than the `index`'th tab selected _works as expected_
* _Verified that_ closing tabs to the right when I have the `index`'th tab selected _works as expected_
* _Verified that_ closing tabs to the right when I have a tab other than the `index`'th tab selected _works as expected_
- This one has one caveat: for whatever reason, if you run this action when the tab that's currently focused is _before_ the `index` param, then the tabs will expand to fill the entire width of the tab row, until you mouse over them. Probably has something to do with tabs not resizing down until there's a mouse exit event.
I've typed this up way too many times now. I'm sticking this comment in Niksa.md, and if it's ever an insufficient explanation of the differences, we can elaborate.
Up until #4999 we deferred all key events to the character event handler
for which `ToUnicodeEx` returned a valid character and alternatively
those who aren't a special key combination as listed in
`TerminalInput`'s implementation.
Since #4999 we started acknowledging/handling all key events no matter
whether they're actually a known key combination. Given non-ASCII inputs
the Win32 `SendInput()` method generates certain sequences that aren't
recognizable combinations though and if they're handled by the key event
handler no follow up character event is sent containing the unicode
character.
This PR adds another condition and defers all key events without scan
code (i.e. those not representable by the current keyboard layout) to
the character event handler.
I'm absolutely not certain that this PR doesn't have a negative effect
on other kinds of inputs.
Is it common for key events to not contain a scan code? I personally
haven't seen it happen before AutoHotKey/SendInput.
Before this PR is merged it'd be nice to have a good testing plan in
place in order to ensure nothing breaks.
## Validation Steps Performed
Remapped `AltGr+8` to `»` using AutoHotKey using `<^>!8::SendInput {Raw}»`.
Ensured `»` is printed if `AltGr+8` is pressed.
Closes#7064Closes#7120
Carlos Zamora (1)
* UIA: use full buffer comparison in rects and endpoint setter (GH-6447)
Dan Thompson (2)
* Tweaks: normalize TextAttribute method names (adjective form) (GH-6951)
* Fix 'bcz exclusive' typo (GH-6938)
Dustin L. Howett (4)
* Fix VT mouse capture issues in Terminal and conhost (GH-7166)
* version: bump to 1.3 on master
* Update Cascadia Code to 2007.15 (GH-6958)
* Move to the TerminalDependencies NuGet feed (GH-6954)
James Holderness (3)
* Render the SGR "underlined" attribute in the style of the font (CC-7148)
* Add support for the "crossed-out" graphic rendition attribute (CC-7143)
* Refactor grid line renderers with support for more line types (CC-7107)
Leonard Hecker (1)
* Added til::spsc, a lock-free, single-producer/-consumer FIFO queue (CC-6751)
Michael Niksa (6)
* Update TAEF to 10.57.200731005-develop (GH-7164)
* Skip DX invalidation if we've already scrolled an entire screen worth of height (GH-6922)
* Commit attr runs less frequently by accumulating length of color run (GH-6919)
* Set memory order on slow atomics (GH-6920)
* Cache the viewport to make invalidation faster (GH-6918)
* Correct comment in this SPSC test as a quick follow up to merge.
Related work items: MSFT-28208358
I found this while crawling through conhost's WindowIo. Mouse wheel
events come in in screen coordinates, unlike literally every other mouse
event.
The WPF control was doing it wrong.
This pull request fixes capture and event generation in VT mouse mode
for both conhost and terminal.
Fixes#6401.
[1/3] Terminal: clamp mouse events to the viewport, don't throw them away
gnome-terminal (at least) sends mouse events whose x/y are at the
extreme ends of the buffer when a drag starts inside the terminal and
then exits it.
We would previously discard any mouse events that exited the borders of
the viewport. Now we will keep emitting events where X/Y=0/w/h.
[2/3] conhost: clamp VT mouse to viewport, capture pointer
This is the same as (1), but for conhost. conhost wasn't already
capturing the pointer when VT mouse mode was in use. By capturing, we
ensure that events that happen outside the screen still result in events
sent to an application (like a release after a drag)
[3/3] wpf: capture the pointer when VT mouse is enabled
This is the same as (2), but for the WPF control. Clamping is handled
in TerminalCore in (1), so we didn't need to do it in WPF.
Move TerminalSettings object from TerminalSettings project
(Microsoft.Terminal.Settings) to TerminalApp project. `TerminalSettings`
specifically operates as a bridge that exposes any necessary information
to a TerminalControl.
Closes#7139
Related Epic: #885
Related Spec: #6904
## PR Checklist
* [X] Closes#7139
* [X] CLA signed
* [X] Tests ~added~/passed (no additional tests necessary)
* [X] ~Documentation updated~
* [X] ~Schema updated~
## Validation Steps Performed
Deployed Windows Terminal and opened a few new tabs.
Add some user research to determine what the average number of characters a user types before executing a cmdpal action.
This might need to be modified when it merges with #6732
Updates TAEF to 10.57.200731005-develop
## PR Checklist
* [x] Helps #6992 by bringing `wttlog.dll` along with the rest of TAEF.
* [x] I work here.
* [x] Automated tests in CI
* [x] No doc/schema update necessary (checked for docs in this repo)
* [x] Am core contributor.
Co-authored-by: Mike Griese <zadjii@gmail.com>
## Summary of the Pull Request
This spec is a subset of #5772, but specific to per-profile tab colors. We've had enough requests for that in the last few days that I want to pull that feature out into it's own spec, so we can get that approved and implemented in a future-proof way.
> This spec describes a way to specify tab colors in a profile in a way that will
> be forward compatible with theming the Terminal. This spec will be largely
> dedicated to the design of a single setting, but within the context of theming.
>
## PR Checklist
* [x] Specs: #1337
* [x] References: #5772
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
This PR updates the rendering of the _underlined_ graphic rendition
attribute, using the style specified in the active font, instead of just
reusing the grid line at the bottom of the character cell.
* Support for drawing the correct underline effect in the grid line
renderer was added in #7107.
There was already an `ExtendedAttributes` flag defined for the
underlined state, but I needed to update the `SetUnderlined` and
`IsUnderlined` methods in the `TextAttribute` class to use that flag
now in place of the legacy `LVB_UNDERSCORE` attribute. This enables
underlines set via a VT sequence to be tracked separately from
`LVB_UNDERSCORE` grid lines set via the console API.
I then needed to update the `Renderer::s_GetGridlines` method to
activate the `GridLines::Underline` style when the `Underlined`
attribute was set. The `GridLines::Bottom` style is still triggered by
the `LVB_UNDERSCORE` attribute to produce the bottom grid line effect.
Validation
----------
Because this is a change from the existing behaviour, certain unit tests
that were expecting the `LVB_UNDERSCORE` to be toggled by `SGR 4` and
`SGR 24` have now had to be updated to check the `Underlined` flag
instead.
There were also some UI Automation tests that were checking for `SGR 4`
mapping to `LVB_UNDERSCORE` attribute, which I've now substituted with a
test of the `SGR 53` overline attribute mapping to
`LVB_GRID_HORIZONTAL`. These tests only work with legacy attributes, so
they can't access the extended underline state, and I thought a
replacement test that covered similar ground would be better than
dropping the tests altogether.
As far as the visual rendering is concerned, I've manually confirmed
that the VT underline sequences now draw the underline in the correct
position and style, while grid lines output via the console API are
still displayed in their original form.
Closes#2915
This PR adds support for the ANSI _crossed-out_ graphic rendition
attribute, which is enabled by the `SGR 9` escape sequence.
* Support for the escape sequences and storage of the attribute was
originally added in #2917.
* Support for drawing the strikethrough effect in the grid line renderer
was added in #7107.
Since the majority of the code required for this attribute had already
been implemented, it was just a matter of activating the
`GridLines::Strikethrough` style in the `Renderer::s_GetGridlines`
method when the `CrossedOut` attribute was set.
VALIDATION
There were already some unit tests in place in `VtRendererTest` and the
`ScreenBufferTests`, but I've also now extended the SGR tests in
`AdapterTest` to cover this attribute.
I've manually confirmed the first test case from #6205 now works as
expected in both conhost and Terminal.
Closes#6205
When we added support for win32 input mode, we neglected to pass
`ENHANCED_KEY` through the two surfaces that would generate events. This
broke arrow keys in much the same way was #2397, but in a different
layer.
While I was working on the WPF control, I took a moment to refactor the
message cracking out into a helper. It's a lot easier on the eyes than
four lines of bit shifting repeated three times.
Fixes#7074
Allows splitting pane (with default settings) by holding down ALT and pressing the new tab button ('+')
## PR Checklist
* [X] Closes#6757
* [X] Works here.
* [X] Manual test (below)
* [X] Is core contributor.
## More detailed description
Pretty much exactly the code added in #5928 (all credit to @carlos-zamora), but put at the new tab button event binding
## Validation steps
Seems to work - holding ALT while pressing '+' opens a pane instead of a tab. Holding ALT while starting up terminal for the first time does not seem to affect the behaviour.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 29b1a1d663d0047dc0d2125dd05f75959bca27ef
Related work items: MSFT:27866336
This is a refactoring of the grid line renderers, adjusting the line
widths to scale with the font size, and optimising the implementation to
cut down on the number of draw calls. It also extends the supported grid
line types to include true underlines and strike-through lines in the
style of the active font.
The main gist of the optimisation was to render the horizontal lines
with a single draw call, instead of a loop with lots of little strokes
joined together. In the case of the vertical lines, which still needed
to be handled in a loop, I've tried to move the majority of static
calculations outside the loop, so there is bit of optimisation there
too.
At the same time this code was updated to support a variable stroke
width for the lines, instead of having them hardcoded to 1 pixel. The
width is now calculated as a fraction of the font size (0.025 "em"),
which is still going to be 1 pixel wide in most typical usage, but will
scale up appropriately if you zoom in far enough.
And in preparation for supporting the SGR strike-through attribute, and
true underlines, I've extended the grid line renders with options for
handling those line types as well. The offset and thickness of the lines
is obtained from the font metrics (rounded to a pixel width, with a
minimum of one pixel), so they match the style of the font.
VALIDATION
For now we're still only rendering grid lines, and only the top and
bottom lines in the case of the DirectX renderer in Windows Terminal. So
to test, I hacked in some code to force the renderer to use all the
different options, confirming that they were working in both the GDI and
DirectX renderers.
I've tested the output with a number of different fonts, comparing it
with the same text rendered in WordPad. For the most part they match
exactly, but there can be slight differences when we adjust the font
size for grid alignment. And in the case of the GDI renderer, where
we're working with pixel heights rather than points, it's difficult to
match the sizes exactly.
This is a first step towards supporting the strike-through attribute
(#6205) and true underlines (#2915).
Closes#6911
We've been trying to improve the copy/paste experience with the terminal
in Visual Studio. Once of our problematic scenarios is when the terminal
is connected to a remote environment and the user attempts to
copy/paste. This gets forwarded to the remote shell that copy/paste into
the remote clipboard instead of the local one.
So we opted to add ctrl+shift+c/v to the terminal and need access to the
selected text via the terminal control
VALIDATION
Tested with Visual Studio integrated terminal
- Move to GSL 3.1.0 (GH-6908)
- Replace the color table init code with two const arrays (GH-6913)
- Replace basic_string_view<T> with span<const T> (GH-6921)
- Replace gsl::at with a new til::at(span) for pre-checked bounds (GH-6925)
Related work items: MSFT:27866336
[Git2Git] Git Train: Merge of building/rs_onecore_dep_uxp/200720-1445 into official/rs_onecore_dep_uxp
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 5e1509a00f1acdefe1e6392468ffc9ae44dc89cb
Related work items: MSFT:25731998
* send alt/F10 through the control
We were not listening for WM_SYSKEY{UP,DOWN}
* extract the actual scancode during WM_CHAR, not the bitfield
We were accidentally sending some of the additional keypress data in with
the character event in Win32 Input Mode
* set default fg/bg to campbell
The WPF control starts up in PowerShell blue even though it's not typically used
in PowerShell blue.
* don't rely on the font to determine wideness
This is a cross-port of #2928 to the WPF control
* deterministic shutdown
In testing, I saw a handful of crashes on teardown because we were not shutting
down the render thread properly.
* don't pass 10 for the font weight ...
When Cascadia Code is set, it just looks silly.
* trigger render when selection is cleared, do it under lock
Fixes#6966.
In UiaTextRange, `_getBufferSize` returns an optimized version of the
size of the buffer to be the origin and the last character in the
buffer. This is to improve performance on search or checking if you are
currently on the last word/line.
When setting the endpoint and drawing the bounding rectangles, we should
be retrieving the true buffer size. This is because it is still possible
to create UiaTextRanges that are outside of this optimized size. The
main source of this is `ExpandToEnclosingUnit()` when the unit is
`Document`. The end _should_ be the last visible character, but it isn't
because that would break our tests.
This is an incomplete solution. #6986 is a follow up to completely test
and implement the solution.
The crash in #6402 was caused by getting the document range (a range of
the full text buffer), then moving the end by one character. When we
get the document range, we get the optimized size of the buffer (the
position of the last character). Moving by one character is valid
because the buffer still has more to explore. We then crash from
checking if the new position is valid on the **optimized size**, not the
**real size**.
REFERENCES
#6986 - follow up to properly handle/test this "end of buffer" problem
Closes#6402
Original notes from @M-Pixel:
> Console applications assume that backgrounds are black, and that
> `lightBlack`/`DarkGrey` are lighter than `black`/`Black`. This
> assumption is accounted for by all color schemes in `defaults.json`,
> except for the Solarized themes.
>
> The Solarized Dark theme, in particular, makes `-Parameters` invisible
> against the background in PowerShell, which is obviously an unacceptable
> usability flaw.
>
> This change makes `black` and `background` to the same (which is common
> throughout the color schemes), and makes `brightBlack` (`DarkGray` in
> .NET) lighter than black (which is obviously more correct given the
> meanings of those words).
Out of the box, we ship a pretty bad behavior.
If I look at all of the existing shipped color schemes--and that
includes things like Tango and One Half--we are universally following a
`background` == `black` rule.
If I consult gnome-terminal or xterm, they do the same thing; Xterm by
default, gnome-terminal for solarized. The background generally matches
color index `0` across all their **dark** schemes. Konsole and
lxterminal disagree and map background to `0 intense` for Solarized.
I want to put our Solarized schemes on a deprecation path, but
unfortunately we still need to ship _something_ for users who we're
going to strand on them.
I'm going to have to swallow my bitter and say that yes, we should
probably just change the index mapping and go with something that works
right out of the box while we figure out how to do perceptual color
nudging and eventually remove bad defaults (like Solarized).
From #6618.
Fixes#4047.
Closes#6618.
## Summary of the Pull Request
Adds a execute commandline action (`wt`), which lets a user bind a key to a specific `wt` commandline. This commandline will get parsed and run _in the current window_.
## References
* Related to #4472
* Related to #5400 - I need this for the commandline mode of the Command Palette
* Related to #5970
## PR Checklist
* [x] Closes oh, there's not actually an issue for this.
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - yes it does
## Detailed Description of the Pull Request / Additional comments
One important part of this change concerns how panes are initialized at runtime. We've had some persistent trouble with initializing multiple panes, because they rely on knowing how big they'll actually be, to be able to determine if they can split again.
We previously worked around this by ignoring the size check when we were in "startup", processing an initial commandline. This PR however requires us to be able to know the initial size of a pane at runtime, but before the parents have necessarily been added to the tree, or had their renderer's set up.
This led to the development of `Pane::PreCalculateCanSplit`, which is very highly similar to `Pane::PreCalculateAutoSplit`. This method attempts to figure out how big a pane _will_ take, before the parent has necessarily laid out.
This also involves a small change to `TermControl`, because if its renderer hasn't been set up yet, it'll always think the font is `{0, fontHeight}`, which will let the Terminal keep splitting in the x direction. This change also makes the TermControl set up a renderer to get the real font size when it hasn't yet been initialized.
## Validation Steps Performed
This was what the json blob I was using for testing evolved into
```json
{
"command": {
"action":"wt",
"commandline": "new-tab cmd.exe /k #work 15 ; split-pane cmd.exe /k #work 15 ; split-pane cmd.exe /k media-commandline ; new-tab powershell dev\\symbols.ps1 ; new-tab -p \"Ubuntu\" ; new-tab -p \"haunter.gif\" ; focus-tab -t 0",
},
"keys": ["ctrl+shift+n"]
}
```
I also added some tests.
# TODO
* [x] Creating a `{ "command": "wt" }` action without a commandline will spawn a new `wt.exe` process?
- Probably should just do nothing for the empty string
We spend a lot of time invalidating in the DX Renderer. This is a
creative trick to not bother invalidating any further if we can tell
that the bitmap is already completely invalidated. That is, if we've
scrolled at least an entire screen in height... then the entire bitmap
had to have been marked as invalid as the new areas were "uncovered" by
the `InvalidateScroll` command. So further setting invalid bits on top
of a fully invalid map is pointless.
Note: I didn't use `bitmap::all()` here because it is significantly
slower to check all the bits than it is to just reason out that the
bitmap was already fully marked.
## Validation Steps Performed
- Run `time cat big.txt`. Checked average time before/after, WPR traces
before/after.
The act of calling `InsertAttrRuns` is relatively slow. Instead of
calling it a bunch of times to meddle with colors one cell at a time,
we'll accumulate a length of color and call it to make it act all at
once. This is great for when one color full line is getting replaced
with another color full line OR when a line is being replaced with the
same color all at once. There's significantly fewer checks to be made
inside `InsertAttrRuns` if we can help it out by accumulating the length
of each color before asking it to stitch it into the storage.
Validation
----------
- Run `time cat big.txt` and `time cat ls.txt` under VS Performance
Profiler.
By default, the memory order on atomics is `seq_cst`. This is a relatively expensive ordering and it shows in situations where we're rapidly signaling a consumer to pick up something from a producer. I've instead attempted to switch these to `release` (producer) and `acquire` (consumer) to improve the performance of these signals.
## Validation Steps Performed
- Run `time cat big.txt` and `time cat ls.txt` under VS Performance Profiler.
## PR Checklist
* [x] Closes perf itch
* [x] I work here
* [x] Manual test
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
## Summary of the Pull Request
Text can have various attributes, such as "bold", "italic", "underlined", etc. The TextAttribute class embodies this. It has methods to set/query these attributes.
This change tweaks a few of the method names to make them match. I.e. for an imaginary text property "Foo", we should have methods along the lines of:
```
IsFoo
SetFoo(bool isFoo)
```
And variations should match: we should have "Foo" and "OverFoo", not "Fooey" and "OverFoo".
I chose to standardize on the adjective form, since that's what we are closest to already. The attributes I attacked here are:
SetItalic**s** --> SetItalic
SetUnderline --> SetUnderline**d**
SetOverline --> SetOverline**d**
("italic" is an adjective; "italics" is a plural noun, representing letters or words in an italic typeface)
And I also added methods for "DoublyUnderlined" for good measure.
I stopped short of renaming the GraphicsOptions enum values to match, too; but I'd be willing to do that in a follow-up change if people wanted it.
## Validation Steps Performed
It builds, and tests still pass.
This pull request converts the following JSON deserializers to use the
new JSON deserializer pattern:
* Profile
* Command
* ColorScheme
* Action/Args
* GlobalSettings
* CascadiaSettingsSerialization
This is the completion of a long-term JSON refactoring that makes our
parser and deserializer more type-safe and robust. We're finally able to
get rid of all our manual enum conversion code and unify JSON conversion
around _types_ instead of around _keys_.
I've introduced another file filled with template specializations,
TerminalSettingsSerializationHelpers.h, which comprises a single unit
that holds all of the JSON deserializers (and eventually serializers)
for every type that comes from TerminalApp or TerminalSettings.
I've also moved some types out of Profile and GlobalAppSettings into a
new SettingsTypes.h to improve settings locality.
This does to some extent constitute a breaking change for already-broken
settings. Instead of parsing "successfully" (where invalid values are
null or 0 or unknown or unset), deserialization will now fail when
there's a type mismatch. Because of that, some tests had to be removed.
While I was on a refactoring spree, I removed a number of helpless
helpers, like GetWstringFromJson (which converted a u8 string to an
hstring to make a wstring out of its data pointer :|) and
_ConvertJsonToBool.
In the future, we can make the error types more robust and give them
position and type information such that a conformant application can
display rich error information ("line 3 column 3, I expected a string,
you gave me an integer").
Closes#2550.
After we stood up our own NuGet feed in Azure blob storage, Azure DevOps
came out with a public artifact feed feature. I've migrated all our
packages over, and the only thing left to do is switch our project's
NuGet config to use it.
Fixes#6952
The command palette is a ListView of commands. As you type into the
search box, commands are added or removed from the ListView. Currently,
each update is done by completely clearing the backing list, then adding
back any items that should be displayed. However, this defeats the
ListView's built-in animations: upon every keystroke, ListView displays
its list-clearing animation, then animates the insertion of every item
that wasn't deleted. This results in noticeable flickering.
This PR changes the update logic so that it updates the list using
(roughly) the minimum number of Insert and Remove calls, so the ListView
makes smoother transitions as you type.
I implemented it by keeping the existing code that builds the filtered
list, but I changed it to build into a scratch list. Then I grafted on
a generic delta algorithm to make the real list look like the scratch
list.
To verify the delta algorithm, I tested all 360,000 permutations of
pairs of up to 5 element lists in a toy C# app.
## Validation
I'm not sure if my screen capture tool really caught all the flickering
here, but the screencasts below should give a rough idea of the
difference. (All the flickering was becoming a nuisance while I was
testing out the HC changes.)
See the images in #6939 for more info.
Co-authored-by: Jeffrey Tippet <jtippet@microsoft.com>
In `Renderer::TriggerRedraw`, the act of fetching the viewport from the
`pData` over and over is wasted time. We already have a cached variable
of the viewport that is updated on every scroll check (on
`TriggerScroll` and on `PaintFrame`.) Scrolling wouldn't be working
correctly if the clients weren't already notifying us that the viewport
has changed for scroll purposes, so we can just keep using that cached
value for the invalidation restriction to speed things up over fetching
it again.
## Validation Steps Performed
- Run `time cat big.txt`. Checked average time before/after, WPR traces
before/after.
## PR Checklist
* [x] Closes perf itch
* [x] I work here
* [x] Manual test
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
## Summary of the Pull Request
This PR adds the `til::spsc` namespace, which implements a lock-free, single-producer, single-consumer FIFO queue ("channel"). The queue efficiently blocks the caller using Futexes if no data can be written to / read from the queue (e.g. using `WaitOnAddress` on Windows). Furthermore it allows batching of data and contains logic to signal the caller if the other side has been dropped/destructed.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
`til::spsc::details::arc<T>` contains most of the queue's logic and as such has the relevant documentation for its design.
## Validation Steps Performed
The queue was tested on Windows, Linux and macOS using MSVC, gcc and llvm and each of their available runtime introspection utilities in order to ensure no race conditions or memory leaks occur.
The recent changes to use gsl::span everywhere added a few bounds checks
along codepaths where we were already checking bounds. Some of them may
be non-obvious to the optimizer, so we can now use til::at to help them
along.
To accomplish this, I've added a new overload of til::at that takes a
span and directly accesses its backing buffer.
We were using std::basic_string_view as a stand-in for std::span so that
we could change over all at once when C++20 dropped with full span
support. That day's not here yet, but as of 54a7fce3e we're using GSL 3,
whose span is C++20-compliant.
This commit replaces every instance of basic_string_view that was not
referring to an actual string with a span of the appropriate type.
I moved the `const` qualifier into span's `T` because while
`basic_string_view.at()` returns `const T&`, `span.at()` returns `T&`
(without the const). I wanted to maintain the invariant that members of
the span were immutable.
* Mechanical Changes
* `sv.at(x)` -> `gsl::at(sp, x)`
* `sv.c{begin,end}` -> `sp.{begin,end}` (span's iterators are const)
I had to replace a `std::basic_string<>` with a `std::vector<>` in
ConImeInfo, and I chose to replace a manual array walk in
ScreenInfoUiaProviderBase with a ranged-for. Please review those
specifically.
This will almost certainly cause a code size regression in Windows
because I'm blowing out all the PGO counts. Whoops.
Related: #3956, #975.
This results in smaller code and faster copying. I chose til::color even
though it results in slightly worse codegen (byteswapping in a tight
loop) than COLORREF (SSE-enlightened block copy) because eventually the
internal representations of the color tables will also be til::color and
_then_ it will become a block copy.
This commit adds image assets for High Contrast mode
Tagging this issue so it contains a nice list of all the recent HC
fixes: #5360
I made several changes to DHowett's script and added it to the repo:
* Add support for generating high contrast icons
* Add the ability to easily edit the "intermediate" (previously "zbase")
files for manual hinting
* Appease the spellchecker
I created new SVGs for HC mode. There's one SVG for both Black and White
modes -- I just invert the colors. Then I manually hinted the generated
bitmaps for the production icons. I didn't bother hinting the Dev/Pre
ones, so the text does get unreadable at small sizes.
View the original images in #6915.
Co-authored-by: Jeffrey Tippet <jtippet@microsoft.com>
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Closes#6822
This PR adds support for always on top mode, via two mechanisms:
* The global setting `alwaysOnTop`. When set to true, the window will be
created in the "topmost" group of windows. Changing this value will
hot-reload whether the window is in the topmost group.
* The action `toggleAlwaysOnTop`, which will toggle the `alwaysOnTop`
property at runtime.
## Detailed Description of the Pull Request / Additional comments
All "topmost" windows maintain an internal z-ordering relative to one
another, but they're all always above all other "non-topmost" windows.
So multiple Windows Terminal windows which are both `alwaysOnTop` will
maintain a z-order relative to one another, but they'll all be on top of
all other windows.
## Validation Steps Performed
Toggled always on top mode, both in the settings and also at runtime,
and verified that it largely did what I expected.
Closes#3038
This adds `nt`, `sp`, and `ft` as aliases for `new-tab`, `split-pane`,
and `focus-tab`, respectively. These do exactly the same thing as their
long for counterparts, but are just shorter, for those of us who type
slower than a fifth grader 👀
Now you can do
```
wt nt cmd.exe /k #work 15 ; sp cmd.exe /k #work 15 ; sp cmd.exe /k
media-commandline ; nt powershell dev\\symbols.ps1 ; nt -p \"Ubuntu\" ;
nt -p \"Ubuntu\" ; ft -t 0
```
instead of
```
new-tab cmd.exe /k #work 15 ; split-pane cmd.exe /k #work 15 ;
split-pane cmd.exe /k media-commandline ; new-tab powershell
dev\\symbols.ps1 ; new-tab -p \"Ubuntu\" ; new-tab -p \"Ubuntu\" ;
focus-tab -t 0
```
The pattern I'm using here is that each of these subcommands now has a
little helper lambda that actually sets up the subcommand with the
required arguments, and we just call that lambda twice, once for the
long-form of the command, and again for the short.
I imagine that in the future, we won't necessarily have short-forms for
every subcommands, so if there are future conflicts we'd have to figure
that out pre-emptively, but these all seem like they'll need a short
form.
Closes#5466
GSL 3, the next major version of GSL after the one we're using, replaced
their local implementation of `span` with one that more closely mimics
C++20's span. Unfortunately, that is a breaking change for all of GSL's
consumers.
This commit updates our use of span to comply with the new changes in
GSL 3.
Chief among those breaking changes is:
* `span::at` no longer exists; I replaced many instances of `span::at`
with `gsl::at(x)`
* `span::size_type` has finally given up on `ptrdiff_t` and become
`size_t` like all other containers
While I was here, I also made the following mechanical replacements:
* In some of our "early standardized" code, we used std::optional's
`has_value` and `value` back-to-back. Each `value` incurs an
additional presence test.
* Change: `x.value().member` -> `x->member` (`optional::operator->`
skips the presence test)
* Change: `x.value()` -> `*x` (as above)
* GSL 3 uses `size_t` for `size_type`.
* Change: `gsl::narrow<size_t>(x.size())` -> `x.size()`
* Change: `gsl::narrow<ptrdiff_t>(nonSpan.size())` -> `nonSpan.size()`
during span construction
I also replaced two instances of `x[x.size() - 1]` with `x.back()` and
one instance of a manual array walk (for comparison) with a direct
comparison.
NOTE: Span comparison and `make_span` are not part of the C++20 span
library.
Fixes#6251
{fmt} 7.0.1 improves binary size, compile-time format string handling,
compile time improvements and named arguments.
In a test Windows build, it shrank our binary by ~14kb.
Closes#6905.
## PR Checklist
* [x] Closes#6905
* [x] CLA
## Summary of the Pull Request
This PR adds support for the `SGR 8` and `SGR 28` escape sequences,
which enable and disable the _concealed/invisible_ graphic rendition
attribute. When a character is output with this attribute set, it is
rendered with the same foreground and background colors, so the text is
essentially invisible.
## PR Checklist
* [x] Closes#6876
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #6876
## Detailed Description of the Pull Request / Additional comments
Most of the framework for this attribute was already implemented, so it
was just a matter of updating the `TextAttribute::CalculateRgbColors`
method to make the foreground the same as the background when the
_Invisible_ flag was set. Note that this has to happen after the
_Reverse Video_ attribute is applied, so if you have white-on-black text
that is reversed and invisible, it should be all white, rather than all
black.
## Validation Steps Performed
There were already existing SGR unit tests covering this attribute in
the `ScreenBufferTests`, and the `VtRendererTest`. But I've added to the
`AdapterTest` which verifies the SGR sequences for setting and resetting
the attribute, and I've extended the `TextAttributeTests` to verify that
the color calculations return the correct values when the attribute is
set.
I've also manually confirmed that we now render the _concealed text_
values correctly in the _ISO 6429_ tests in Vttest. And I've manually
tested the output of _concealed_ when combined with other attributes,
and made sure that we're matching the behaviour of most other terminals.
This parameter was added as a workaround for our fast trackpad
scrolling. Since that was fixed before 1.0 shipped, in #4554, it has
been largely vestigial. There is no reason for us to keep it around any
longer.
It was also the only "logic" in TerminalSettings, which is otherwise a
library that only transits data between two other libraries.
I have not removed it from the schema, as I do not want to mark folks'
settings files invalid to a strict schema parser.
While I was in the area, I added support for "scroll one screen at a
time" (which is represented by the API returning WHEEL_PAGESCROLL),
fixing #5610. We were also storing it in an int (whoops) instead of a
uint.
Fixes#5610
console: switch to /Zc:wchar_t (native wchar_t)
This matches what we use in OpenConsole and makes {fmt} play nice.
I've also removed the workaround we introduced into OutputCellIterator
to work around not using /Zc:wchar_t.
Fixes MSFT:27626309.
Fixes GH-2673.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 1508f7c232ec58bebc37fedfdec3eb8f9bff5502
## Summary of the Pull Request
This PR adds support for the `SGR 2` escape sequence, which enables the
ANSI _faint_ graphic rendition attribute. When a character is output
with this attribute set, it uses a dimmer version of the active
foreground color.
## PR Checklist
* [x] Closes#6703
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #6703
## Detailed Description of the Pull Request / Additional comments
There was already an `ExtendedAttributes::Faint` flag in the
`TextAttribute` class, but I needed to add `SetFaint` and `IsFaint`
methods to access that flag, and update the `SetGraphicsRendition`
methods of the two dispatchers to set the attribute on receipt of the
`SGR 2` sequence. I also had to update the existing `SGR 22` handler to
reset _Faint_ in addition to _Bold_, since they share the same reset
sequence. For that reason, I thought it a good idea to change the name
of the `SGR 22` enum to `NotBoldOrFaint`.
For the purpose of rendering, I've updated the
`TextAttribute::CalculateRgbColors` method to return a dimmer version of
the foreground color when the _Faint_ attribute is set. This is simply
achieved by dividing each color component by two, which produces a
reasonable effect without being too complicated. Note that the _Faint_
effect is applied before _Reverse Video_, so if the output it reversed,
it's the background that will be faint.
The only other complication was the update of the `Xterm256Engine` in
the VT renderer. As mentioned above, _Bold_ and _Faint_ share the same
reset sequence, so to forward that state over conpty we have to go
through a slightly more complicated process than with other attributes.
We first check whether either attribute needs to be turned off to send
the reset sequence, and then check if the individual attributes need to
be turned on again.
## Validation
I've extended the existing SGR unit tests to cover the new attribute in
the `AdapterTest`, the `ScreenBufferTests`, and the `VtRendererTest`,
and added a test to confirm the color calculations when _Faint_ is set
in the `TextAttributeTests`.
I've also done a bunch of manual testing with all the different VT color
types and confirmed that our output is comparable to most other
terminals.
## Summary of the Pull Request
Add support for "focus" mode, which only displays the actual terminal content, no tabs or titlebar. The edges of the window are draggable to resize, but the window can't be moved in borderless mode.
The window looks _slightly_ different bewteen different values for `showTabsInTitlebar`, because switching between the `NonClientIslandWindow` and the `IslandWindow` is _hard_.
`showTabsInTitlebar` | Preview
-- | --
`true` | 
`false` | 
## PR Checklist
* [x] Closes#2238
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* **KNOWN ISSUE**: Upon resizing the NCIW, the top frame margin disappears, making that border disappear entirely. 6356aaf has a bunch of WIP work for me trying to fix that, but I couldn't get it quite right.
## Validation Steps Performed
* Toggled between focus and fullscreen a _bunch_ in both modes.
This commit updates JsonUtilsNew to support winrt
`Windows::Foundation::IReference<T>` as an option type, and cleans up the
optional support code by removing the optional overload on
`GetValue(...)`. Instead of using an overload with a partial
specialization, we're using a constexpr if with a type trait to
determine option-type-ness.
In addition, Carlos reported an issue with deriving from `FlagMapper`
(itself templated) and referring to the base type's members without
fully qualifying them. To make derivation easier, `EnumMapper` and
`FlagMapper` now provide `BaseEnumMapper` and `BaseFlagMapper` type
aliases.
I've taken the opportunity to add a `winrt::hstring` conversion
trait.
Lastly, in casual use, I found out that I'd written the til::color
converter wrong: it supports color strings of length 7 (`#rrggbb`) and
length 4 (`#rgb`). I mistyped (and failed to test) support for 4-length
color strings by pretending they were only 3 characters long.
## References
Merged JsonUtils changes from #6004 and #6590.
## PR Checklist
* [x] Unblocks aforementioned PRs
* [x] cla
* [x] Tests added/passed
* [x] Documentation N/A
* [x] Schema N/A
* [x] Kid tested, mother approved.
Due to a shell limitation, Ctrl+Shift+Enter will not launch Windows
Terminal as Administrator. This is caused by the app execution alias and
the actual targeted executable not having the same name.
In addition, PowerShell has an issue detecting app execution aliases as
GUI/TUI applications. When you run wt from PowerShell, the shell will
wait for WT to exit before returning to the prompt. Having a shim that
immediately re-executes WindowsTerminal and then returns handily knocks
this issue out (as the process that PS was waiting for exits
immediately.)
This could cause a regression for anybody who tries to capture the PID
of wt.exe. Our process tree is not an API, and we have offered no
consistency guarantee on it.
VALIDATION
----------
Tested manual launch in a number of different scenarios:
* [x] start menu "wtd"
* [x] start menu tile
* [x] powertoys run
* [x] powertoys run ctrl+shift (admin)
* [x] powershell inbox, "core"
* [x] cmd
* [x] run dialog
* [x] run dialog ctrl+shift (admin)
* [x] run from a lnk with window mode=maximized
Fixes#4645 (PowerShell waits for wt)
Fixes#6625 (Can't launch as admin using C-S-enter)
This PR adds support for the `DA2` (Secondary Device Attributes) and
`DA3` (Tertiary Device Attributes) escape sequences, which are standard
VT queries reporting basic information about the terminal.
The _Secondary Device Attributes_ response is made up of a number of
parameters:
1. An identification code, for which I've used 0 to indicate that we
have the capabilities of a VT100 (using code 0 for this is an XTerm
convention, since technically DA2 would not have been supported by a
VT100).
2. A firmware revision level, which some terminal emulators use to
report their actual version number, but I thought it best we just
hardcode a value of 10 (the DEC convention for 1.0).
3. Additional hardware options, which tend to be device specific, but
I've followed the convention of the later DEC terminals using 1 to
indicate the presence of a PC keyboard.
The _Tertiary Device Attributes_ response was originally used to provide
a unique terminal identification code, and which some terminal emulators
use as a way to identify themselves. However, I think that's information
we'd probably prefer not to reveal, so I've followed the more common
practice of returning all zeros for the ID.
In terms of implementation, the only complication was the need to add an
additional code path in the `OutputStateMachine` to handle the `>` and
`=` intermediates (technically private parameter prefixes) that these
sequences require. I've done this as a single method - rather than one
for each prefix - since I think that makes the code easier to follow.
VALIDATION
----------
I've added output engine tests to make sure the sequences are dispatched
correctly, and adapter tests to confirm that they are returning the
responses we expect. I've also manually confirmed that they pass the
_Test of terminal reports_ in Vttest.
Closes#5836
This is a refactoring of the renderer color calculations to simplify the
implementation, and to make it easier to support additional
color-altering rendition attributes in the future (e.g. _faint_ and
_conceal_).
## References
* This is a followup to PRs #3817 and #6809, which introduced additional
complexity in the color calculations, and which suggested the need for
refactoring.
## Detailed Description of the Pull Request / Additional comments
When we added support for `DECSCNM`, that required the foreground and
background color lookup methods to be able to return the opposite of
what was requested when the reversed mode was set. That made those
methods unnecessarily complicated, and I thought we could simplify them
considerably just by combining the calculations into a single method
that derived both colors at the same time.
And since both conhost and Windows Terminal needed to perform the same
calculations, it also made sense to move that functionality into the
`TextAttribute` class, where it could easily be shared.
In general this way of doing things is a bit more efficient. However, it
does result in some unnecessary work when only one of the colors is
required, as is the case for the gridline painter. So to make that less
of an issue, I've reordered the gridline code a bit so it at least
avoids looking up the colors when no gridlines are needed.
## Validation Steps Performed
Because of the API changes, quite a lot of the unit tests had to be
updated. For example instead of verifying colors with two separate calls
to `LookupForegroundColor` and `LookupBackgroundColor`, that's now
achieved with a single `LookupAttributeColors` call, comparing against a
pair of values. The specifics of the tests haven't changed though, and
they're all still working as expected.
I've also manually confirmed that the various color sequences and
rendition attributes are rendering correctly with the new refactoring.
There is going to be a very long tail of applications that will
explicitly request VT SGR 40/37 when what they really want is to
SetConsoleTextAttribute() with a black background/white foreground.
Instead of making those applications look bad (and therefore making us
look bad, because we're releasing this as an update to something that
"looks good" already), we're introducing this compatibility quirk.
Before the color reckoning in #6698 + #6506, *every* color was subject
to being spontaneously and erroneously turned into the default color.
Now, only the 16-color palette value that matches the active console
background/foreground color will be destroyed, and only when received
from specific applications.
Removal will be tracked by #6807.
Michael and I discussed what layer this quirk really belonged in. I
originally believed it would be sufficient to detect a background color
that matched the legacy default background, but @j4james provided an
example of where that wouldn't work out (powershell setting the
foreground color to white/gray). In addition, it was too heavyhanded: it
re-broke black backgrounds for every application.
Michael thought that it should live in the server, as a small VT parser
that righted the wrongs coming directly out of the application. On
further investigation, however, I realized that we'd need to push more
information up into the server (so that it could make the decision about
which VT was wrong and which was right) than should be strictly
necessary.
The host knows which colors are right and wrong, and it gets final say
in what ends up in the buffer.
Because of that, I chose to push the quirk state down through
WriteConsole to DoWriteConsole and toggle state on the
SCREEN_INFORMATION that indicates whether the colors coming out of the
application are to be distrusted. This quirk _only applies to pwsh.exe
and powershell.exe._
NOTE: This doesn't work for PowerShell the .NET Global tool, because it
is run as an assembly through dotnet.exe. I have no opinion on how to
fix this, or whether it is worth fixing.
VALIDATION
----------
I configured my terminals to have an incredibly garish color scheme to
show exactly what's going to happen as a result of this. The _default
terminal background_ is purple or red, and the foreground green. I've
printed out a heap of test colors to see how black interacts with them.
Pull request #6810 contains the images generated from this test.
The only color lines that change are the ones where black as a
background or white as a foreground is selected out of the 16-color
palette explicitly. Reverse video still works fine (because black is in
the foreground!), and it's even possible to represent "black on default"
and reverse it into "default on black", despite the black in question
having been `40`.
Fixes#6767.
By storing up the accumulated delta in the mouse input handler, we can
enlighten both conhost and terminal about wheel events that are less
than one line in size. Previously, we had a workaround in conhost that
clamped small scroll deltas to a whole line, which made trackpad
scrolling unimaginably fast. Terminal didn't make this mistake, but it
also didn't handle delta accumulation . . . which resulted in the same
behavior.
MouseInput will now wait until it's received WHEEL_DELTA (well-known
constant, value 120) worth of scrolling delta before it dispatches a
single scroll event.
Future considerations may include sending multiple wheel button events
for every *multiple* of WHEEL_DELTA, but that would be a slightly larger
refactoring that I'm not yet ready to undertake.
There's a chance that we should be dividing WHEEL_DELTA by the system's
"number of lines to scroll at once" setting, because on trackpads
conhost now scrolls a little _slow_. I think the only way to determine
whether this is palatable is to just ship it.
Fixes#6184.
## Summary of the Pull Request
This PR adds full support for the `DECSCNM` reverse screen mode in the Windows Terminal to align with the implementation in conhost.
## References
* The conhost implementation of `DECSCNM` was in PR #3817.
* WT originally inherited that functionality via the colors being passed through, but that behaviour was lost in PR #6506.
## PR Checklist
* [x] Closes#6622
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #6622
## Detailed Description of the Pull Request / Additional comments
The `AdaptDispatch::SetScreenMode` now checks if it's in conpty mode and simply returns false to force a pass-through of the mode change. And the `TerminalDispatch` now has its own `SetScreenMode` implementation that tracks any changes to the reversed state, and triggers a redraw in the renderer.
To make the renderer work, we just needed to update the `GetForegroundColor` and `GetBackgroundColor` methods of the terminal's `IRenderData` implementation to check the reversed state, and switch the colors being calculated, the same way the `LookupForegroundColor` and `LookupBackgroundColor` methods work in the conhost `Settings` class.
## Validation Steps Performed
I've manually tested the `DECSCNM` functionality for Windows Terminal in Vttest, and also with some of my own test scripts.
## Summary of the Pull Request
Updates the Terminal's scroll response to new output. The Terminal will not automatically scroll if...
- a selection is active, or
- the viewport is at the bottom of the scroll history
## References
#2529 - Spec
#3863 - Implementation
## PR Checklist
* [X] Closes#980
* [X] Closes#3863
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Updates the `_scrollOffset` value properly in TerminalCore when the cursor moves. We calculate a new `_scrollOffset` based on if we are circling the buffer and how far below the mutable bottom is.
We specifically check for if a selection is active and if the viewport is at the bottom, then use that as a condition for deciding if we should update `_scrollOffset` to the new calculated value or 0 (the bottom of the scroll history).
## Validation Steps Performed
Manual testing. Though I should add automated tests.
- [X] new output
- [X] new output when circling
- [X] new output when circling and viewport is at the top
Looking up the size of the viewport from the underlying dimensions of
the structures seemed like a good idea at the time (so it would only be
in one place), but it turns out to be more of a perf cost than we
expected. Not necessarily on any one hot path, but if we sort by
functions in WPR, it was the top consumer on the Terminal side. This
instead saves the size as a member of the `TextBuffer` and serves that
out. It only changes when it is constructed or resized traditionally, so
it's easy to update/keep track of. It impacted conhost/conpty to a
lesser degree but was still noticeable.
## Validation Steps Performed
- Run `time cat big.txt` under WPR. Checked before and after perf
metrics.
## PR Checklist
* [x] Closes perf itch
* [x] I work here
* [x] Manual test
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
The main change in 16.7 is the separation of `AppContainerApplication`
into `WindowsStoreApp` and `WindowsAppContainer`. There's been a bit of
interest in splitting packaging away from containment, and this is the
first step in that direction.
We're a somewhat unique application, but as WinUI3 becomes more
prevalent we will become _less_ unique.
Some of these things, I've looked at and wondered how they ever worked.
## PR Checklist
* [x] Closes nothing
## Validation Steps Performed
Built locally and in CI. Tested the generated package with the package tester. Built on 16.6 and seen that it still seems to work.
A lot of time was spent between each individual line in the VT paint
engine in allocating some scratch space to assemble the clusters then
deallocating it only to have the next line do that again. Now we just
hold onto that memory space since it should be approximately the size of
a single line wide and will be used over and over and over as painting
continues.
## Validation Steps Performed
- Run `time cat big.txt` under WPR. Checked before and after perf
metrics.
## PR Checklist
* [x] Closes perf itch.
* [x] I work here.
* [x] Manual perf test.
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
Passes the bitmap by ref into the tracing function instead of making a copy on the way in. It's only read anyway for tracing (if enabled) so the copy was a pointless oversight.
## Validation Steps Performed
- Observed WPR trace before and after with `time cat big.txt` in WSL.
This PR enables `ApplicationHighContrastAdjustment::None`. Doing this
disables a set of mitigations in XAML designed to band-aid apps that
were never explicitly designed for High Contrast (HC) modes. Terminal
now has full control of and responsibility for its appearance in HC
mode. This allows Terminal to look a lot better.
On paper, we should be able to set `HighContrastAdjustment="None"` on
the `<Application>` element. But that doesn't have any effect. I don't
know if this is a bug in `<Toolkit:XamlApplication>` or somewhere else.
So instead I set the property in codebehind, which is not as ideal, but
does at least work. I'd love to a way to move this into App.xaml.
The Find box had a couple stray styles to override the ToggleButton's
foreground color. With backplating removed, these styles became
actively harmful (white foreground on highlight color background), so I
just removed them. The built-in style for ToggleButton is perfect
as-is.
Closes#5360
WinUI's `Margin` and `Padding` work very similarly. `Margin` distances
ourselves from our parent. Whereas `Padding` distances our children from
ourselves.
Terminal's `padding` setting is actually implemented by defining
`Margin` on the SwapChainPanel. This means that the "padding" that is
created is actually belongs to SwapChainPanel's parent: Grid (not to be
confused with its parent, "RootGrid").
When a user clicks on the padded area, input goes to Grid. But there's a
twist: you can't actually hit Grid. To be able to hit Grid, you can't
just set IsHitTestVisible. You need to set it's Visibility to Visible,
and it's Background to Transparent (not null) [2].
## Validation Steps Performed
- [X] Start a selection from the padding area
- [X] Click on a SearchBox if one is available
- The SearchBox gets first dibs on the hit test so none gets through
to the SwapChainPanel
## References
[1] https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.uielement.ishittestvisible
[2] https://docs.microsoft.com/en-us/windows/uwp/xaml-platform/events-and-routed-events-overview#hit-testing-and-input-eventsCloses#5626
## Summary of the Pull Request
Pretty straightforward. Logs three scenarios:
* The user opened the command palette (and which mode it was opened in)
* The user ran a command from the palette
* The user dismissed the palette without running an action.
We discussed this in team sync yesterday.
## PR Checklist
* [x] I work here
* [n/a] Requires documentation to be updated
See: https://github.com/microsoft/microsoft-ui-xaml/releases/tag/v2.5.0-prerelease.200609001
> ### Notable Changes:
>
> Resize tab view items only once the pointer has left the TabViewItem strip (microsoft/microsoft-ui-xaml#2569)
> Align TabView visuals with Edge (microsoft/microsoft-ui-xaml#2201)
> Fix background of MenuFlyout in white high contrast (microsoft/microsoft-ui-xaml#2446)
> TabView: Make TabViewItem consume the TabViewItemHeaderForeground theme resource (microsoft/microsoft-ui-xaml#2348)
> TabView: Add tooltips to its scrolling buttons. (microsoft/microsoft-ui-xaml#2369)
* [x] Related to #5360 (@jtippet confirms that this alone does not close it.)
* [x] I work here
## Summary of the Pull Request
In the wake of #6635, a couple things got missed in merges:
* `toggleRetroEffect` didn't get into the schema, nor did `renameTab` or
`commandPalette`.
* `toggleRetroEffect` also didn't get a name
Furthermore, I thought it might be a good idea to start sticking
commands into `bindings` even without `keys`. So I tried doing that for
`opentabColorPicker` and `toggleRetroEffect`, and found immediately that
the labels for the key chord still appear even when the text is empty.
So I added some XAML magic to hide those when the text is empty.
## References
* #6762
* #6691
* #6557
* #6635
## PR Checklist
* [x] Closes#6762
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* See also: https://docs.microsoft.com/en-us/windows/uwp/data-binding/data-binding-quickstart#formatting-or-converting-data-values-for-display
- make sure to switch to C++/WinRT at the top!
## Validation Steps Performed
Removed all my manual actions, ran the Terminal:
## Summary of the Pull Request
This proposes a change to how Terminal will scroll in response to newly
generated output. The Terminal will scroll upon receiving new output if
the viewport is at the bottom of the scroll history and no selection is
active.
This spec also explores the possibility of making this response
configurable with a `snapOnOutput` profile setting. It also discusses
the possibility of adding a scroll lock keybinding action.
## PR Checklist
* [X] Spec for #980
Update colors of our custom NewTab button to match MUX's TabView button
MUX has a NewTab button, but Terminal uses a homemade lookalike. The
version in Terminal doesn't use the same brush color resources as MUX's
button, so it looks very slightly different. This PR updates Terminal's
button to use the exact same colors that MUX uses. I literally copied
these brush names out of MUX source code.
## References
This is the color version of the layout fix#6766
This is a prerequisite for fixing #5360
## Detailed Description of the Pull Request / Additional comments
The real reason that this matters is that once you flip on
`ApplicationHighContrastAdjustment::None`, the existing colors will not
work at all. The existing brushes are themed to black foreground on a
black background when High Contrast (HC) Black theme is enabled. The
only thing that's saving you is
`ApplicationHighContrastAdjustment::Auto` is automatically backplating
the glyphs on the buttons, which (by design) hides the fact that the
colors are poor. The backplates are those ugly squares inside the
buttons on the HC themes.
Before I can push a PR that disables automatic backplating (set
`ApplicationHighContrastAdjustment` to `None`), we'll need to select
better brushes that work in HC mode. MUX has already selected brushes
that work great in all modes, so it just makes sense to use their
brushes.
The one very subtle difference here is that, for non-HC themes, the
glyph's foreground has a bit more contrast when the button is in
hovered/pressed states. Again this slight difference hardly matters
now, but using the correct brushes will become critical when we try to
remove the HC backplating.
Closes#6812
## Summary of the Pull Request
Let's try and figure out just how many people are actually using Solarized. I emailed @DHowett about this a week ago, but otherwise we don't really have any other tasks for this.
## PR Checklist
* [x] I work here
* [n/a] Requires documentation to be updated
The MUX TabView control has a uniquely-shaped [+] button. TerminalApp
doesn't use it: instead, it has a SplitView button that is styled to
look like MUX's official button. However, it doesn't get the button's
shape right. This PR updates TerminalApp's custom button to look more
like MUX's.
The difference is that MUX only rounds the top two corners, and it uses
a bigger radius. Without matching MUX's radius, the upper-left corner
of the button makes an awkward asymmetric divot with the abutting tab.
There's also a spot in the lower-left corner that just looks like
someone accidentally spilled a few pixels on the floor.
Current appearance before this PR:
New appearance with this PR:
Most important deltas highlighted with red circles:
Note that this PR does *not* attempt to fix the colors. The colors are
also just slightly different from what MUX uses. I'll save that for a
separate PR, since all those screenshots would clutter this up this PR.
## Summary of the Pull Request
This PR adds support for the `SGR 53` and `SGR 55` escapes sequences,
which enable and disable the ANSI _overline_ graphic rendition
attribute, the equivalent of the console character attribute
`COMMON_LVB_GRID_HORIZONTAL`. When a character is output with this
attribute set, a horizontal line is rendered at the top of the character
cell.
## PR Checklist
* [x] Closes#6000
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
To start with, I added `SetOverline` and `IsOverlined` methods to the
`TextAttribute` class, to set and get the legacy
`COMMON_LVB_GRID_HORIZONTAL` attribute. Technically there was already an
`IsTopHorizontalDisplayed` method, but I thought it more readable to add
a separate `IsOverlined` as an alias for that.
Then it was just a matter of adding calls to set and reset the attribute
in response to the `SGR 53` and `SGR 55` sequences in the
`SetGraphicsRendition` methods of the two dispatchers. The actual
rendering was already taken care of by the `PaintBufferGridLines` method
in the rendering engines.
The only other change required was to update the `_UpdateExtendedAttrs`
method in the `Xterm256Engine` of the VT renderer, to ensure the
attribute state would be forwarded to the Windows Terminal over conpty.
## Validation Steps Performed
I've extended the existing SGR unit tests to cover the new attribute in
the `AdapterTest`, the `OutputEngineTest`, and the `VtRendererTest`.
I've also manually tested the `SGR 53` and `SGR 55` sequences to confirm
that they do actually render (or remove) an overline on the characters
being output.
The VT reset operations `RIS` and `DECSTR` are implemented as a series
of steps, each of which could potentially fail. Currently these
operations abort as soon as an error is detected, which is particularly
problematic in conpty mode, where some steps deliberately "fail" to
indicate that they need to be "passed through" to the conpty client. As
a result, the reset won't be fully executed. This PR changes that
behaviour, so the error state is recorded for any failures, but the
subsequent steps are still run.
Originally the structure of these operations was of the form:
bool success = DoSomething();
if (success)
{
success = DoSomethingElse();
}
But I've now changed the code so it looks more like this:
bool success = DoSomething();
success = DoSomethingElse() && success;
This means that every one of the steps should execute, regardless of
whether previous steps were successful, but the final _success_ state
will only be true if none of the steps has failed.
While this is only really an issue in the conhost code, I've updated
both the `AdaptDispatch` and `TerminalDispatch` classes, since I thought
it would be best to have them in sync, and in general this seems like a
better way to handle multi-step operations anyway.
VALIDATION
I've manually tested the `RIS` escape sequence (`\ec`) in the Windows
Terminal, and confirmed that it now correctly resets the cursor
position, which it wasn't doing before.
Closes#6545
Pretty straightforward. `toggleRetroEffect` will work to toggle the
retro terminal effect on/off.
* Made possible by contributions from #6551, _and viewers like you_
This PR fixes the scheme resolution bug outlined in #5326
The approach is as follows:
* In [SchemeManager.cs], find the first scheme parser that actually
successfully parses the scheme, as opposed to the existing code, which
finds the first scheme parser which _says it can parse the scheme_, as
that logic spuriously returns `true` currently.
* In [XmlSchemeParser.cs] and [JsonParser.cs], ensure that the contents
of the file are read and the contents passed to XmlDocument.LoadXXX,
as this fails with an UriException on WSL otherwise.
* Remove `CanParse` as it is superfluous. The check for a valid scheme
parser should not just check an extension but also if the file exists
- this is best done by the `ParseScheme` function as it already
returns null on failure.
* Add `FileExtension` to the interface because we need it lifted now.
Closes#5326
Before sending calling the `HandleClipboardData` member function on
the `PasteFromClipboardEventArgs` object when we receive a request
from the `TermControl` to send it the clipboard's text content, we
now display a warning to let the user choose whether to continue or
not if the text is larger than 5 KiB or contains the _new line_
character, which can be a security issue if the user is pasting the
text in a shell.
These warnings can be disabled with the `largePasteWarning` and
`multiLinePasteWarning` global settings respectively.
Closes#2349
This is essentially a rewrite of the
`TerminalDispatch::SetGraphicsRendition` method, bringing it into closer
alignment with the `AdaptDispatch` implementation, simplifying the
`ITerminalApi` interface, and making the code easier to extend. It adds
support for a number of attributes which weren't previously implemented.
REFERENCES
* This is a mirror of the `AdaptDispatch` refactoring in PR #5758.
* The closer alignment with `AdaptDispatch` is a small step towards
solving issue #3849.
* The newly supported attributes should help a little with issues #5461
(italics) and #6205 (strike-through).
DETAILS
I've literally copied and pasted the `SetGraphicsRendition`
implementation from `AdaptDispatch` into `TerminalDispatch`, with only
few minor changes:
* The `SetTextAttribute` and `GetTextAttribute` calls are slightly
different in the `TerminalDispatch` version, since they don't return a
pointless `success` value, and in the case of the getter, the
`TextAttribute` is returned directly instead of by reference.
Ultimately I'd like to move the `AdaptDispatch` code towards that way
of doing things too, but I'd like to deal with that later as part of a
wider refactoring of the `ConGetSet` interface.
* The `SetIndexedForeground256` and `SetIndexedBackground256` calls
required the color indices to be remapped in the `AdaptDispatch`
implementation, because the conhost color table is in a different
order to the XTerm standard. `TerminalDispatch` doesn't have that
problem, so doesn't require the mapping.
* The index color constants used in the 16-color `SetIndexedForeground`
and `SetIndexedBackground` calls are also slightly different for the
same reason.
VALIDATION
I cherry-picked this code on top of the #6506 and #6698 PRs, since
that's only way to really get the different color formats passed-through
to the terminal. I then ran a bunch of manual tests with various color
coverage scripts that I have, and confirmed that all the different color
formats were being rendered as expected.
Closes#6725
This PR reimplements the VT rendering engines to do a better job of
preserving the original color types when propagating attributes over
ConPTY. For the 16-color renderers it provides better support for
default colors and improves the efficiency of the color narrowing
conversions. It also fixes problems with the ordering of character
renditions that could result in attributes being dropped.
Originally the base renderer would calculate the RGB color values and
legacy/extended attributes up front, passing that data on to the active
engine's `UpdateDrawingBrushes` method. With this new implementation,
the renderer now just passes through the original `TextAttribute` along
with an `IRenderData` interface, and leaves it to the engines to extract
the information they need.
The GDI and DirectX engines now have to lookup the RGB colors themselves
(via simple `IRenderData` calls), but have no need for the other
attributes. The VT engines extract the information that they need from
the `TextAttribute`, instead of having to reverse engineer it from
`COLORREF`s.
The process for the 256-color Xterm engine starts with a check for
default colors. If both foreground and background are default, it
outputs a SGR 0 reset, and clears the `_lastTextAttribute` completely to
make sure any reset state is reapplied. With that out the way, the
foreground and background are updated (if changed) in one of 4 ways.
They can either be a default value (SGR 39 and 49), a 16-color index
(using ANSI or AIX sequences), a 256-color index, or a 24-bit RGB value
(both using SGR 38 and 48 sequences).
Then once the colors are accounted for, there is a separate step that
handles the character rendition attributes (bold, italics, underline,
etc.) This step must come _after_ the color sequences, in case a SGR
reset is required, which would otherwise have cleared any character
rendition attributes if it came last (which is what happened in the
original implementation).
The process for the 16-color engines is a little different. The target
client in this case (Windows telnet) is incapable of setting default
colors individually, so we need to output an SGR 0 reset if _either_
color has changed to default. With that out the way, we use the
`TextColor::GetLegacyIndex` method to obtain an approximate 16-color
index for each color, and apply the bold attribute by brightening the
foreground index (setting bit 8) if the color type permits that.
However, since Windows telnet only supports the 8 basic ANSI colors, the
best we can do for bright colors is to output an SGR 1 attribute to get
a bright foreground. There is nothing we can do about a bright
background, so after that we just have to drop the high bit from the
colors. If the resulting index values have changed from what they were
before, we then output ANSI 8-color SGR sequences to update them.
As with the 256-color engine, there is also a final step to handle the
character rendition attributes. But in this case, the only supported
attributes are underline and reversed video.
Since the VT engines no longer depend on the active color table and
default color values, there was quite a lot of code that could now be
removed. This included the `IDefaultColorProvider` interface and
implementations, the `Find(Nearest)TableIndex` functions, and also the
associated HLS conversion and difference calculations.
VALIDATION
Other than simple API parameter changes, the majority of updates
required in the unit tests were to correct assumptions about the way the
colors should be rendered, which were the source of the narrowing bugs
this PR was trying to fix. Like passing white on black to the
`UpdateDrawingBrushes` API, and expecting it to output the default `SGR
0` sequence, or passing an RGB color and expecting an indexed SGR
sequence.
In addition to that, I've added some VT renderer tests to make sure the
rendition attributes (bold, underline, etc) are correctly retained when
a default color update causes an `SGR 0` sequence to be generated (the
source of bug #3076). And I've extended the VT renderer color tests
(both 256-color and 16-color) to make sure we're covering all of the
different color types (default, RGB, and both forms of indexed colors).
I've also tried to manually verify that all of the test cases in the
linked bug reports (and their associated duplicates) are now fixed when
this PR is applied.
Closes#2661Closes#3076Closes#3717Closes#5384Closes#5864
This is only a partial fix for #293, but I suspect the remaining cases
are unfixable.
Essentially what this does is map the default legacy foreground and
background attributes (typically white on black) to the `IsDefault`
color type in the `TextColor` class. As a result, we can now initialize
the buffer for "legacy" shells (like PowerShell and cmd.exe) with
default colors, instead of white on black. This fixes the startup
rendering in conpty clients, which expect an initial default background
color. It also makes these colors update appropriately when the default
palette values change.
One complication in getting this to work, is that the console permits
users to change which color indices are designated as defaults, so we
can't assume they'll always be white on black. This means that the
legacy-to-`TextAttribute` conversion will need access to those default
values.
Unfortunately the defaults are stored in the conhost `Settings` class
(the `_wFillAttribute` field), which isn't easily accessible to all the
code that needs to construct a `TextAttribute` from a legacy value. The
`OutputCellIterator` is particularly problematic, because some iterator
types need to generate a new `TextAttribute` on every iteration.
So after trying a couple of different approaches, I decided that the
least worst option would be to add a pair of static properties for the
legacy defaults in the `TextAttribute` class itself, then refresh those
values from the `Settings` class whenever the defaults changed (this
only happens on startup, or when the conhost _Properties_ dialog is
edited).
And once the `TextAttribute` class had access to those defaults, it was
fairly easy to adapt the constructor to handle the conversion of default
values to the `IsDefault` color type. I could also then simplify the
`TextAttribute::GetLegacyAttributes` method which does the reverse
mapping, and which previously required the default values to be passed
in as a parameter
VALIDATION
I had to make one small change to the `TestRoundtripExhaustive` unit
test which assumed that all legacy attributes would convert to legacy
color types, which is no longer the case, but otherwise all the existing
tests passed as is. I added a new unit test verifying that the default
legacy attributes correctly mapped to default color types, and the
default color types were mapped back to the correct legacy attributes.
I've manually confirmed that this fixed the issue raised in #5952,
namely that the conhost screen is cleared with the correct default
colors, and also that it is correctly refreshed when changing the
palette from the properties dialog. And I've combined this PR with
#6506, and confirmed that the PowerShell and the cmd shell renderings in
Windows Terminal are at least improved, if not always perfect.
This is a prerequisite for PR #6506Closes#5952
With this commit, terminal will be able to copy text to the system
clipboard by using OSC 52 MANIPULATE SELECTION DAATA.
We chose not to implement the clipboard querying functionality offered
by OSC 52, as sending the clipboard text to an application without the
user's knowledge or consent is an immense security hole.
We do not currently support the clipboard specifier Pc to specify which
clipboard buffer should be filled
# Base64 encoded `foo`
$ echo -en "\e]52;;Zm9v\a"
# Multiple lines
# Base64 encoded `foo\r\nbar`
$ echo -en "\e]52;;Zm9vDQpiYXI=\a"
Closes#2946.
Restores the simple text run analysis and skipping of most of the
shaping/layout steps. Corrects one of the fast-path steps to ensure that
offsets and clusters are assigned.
## References
- Bug #6488
- Bug #6664
- Simple run PR #6206
- Simple run revert PR #6665
- Recycle glyph runs PR #6483
The "correction" functions, by which box drawing analysis is one of
them, is dependent on the steps coming before it properly assigning the
four main vectors of the text layout glyphs: indices, advances, offsets,
and clusters. When the fast path is identified by the code from #6206,
only two of those are fully updated: indices and advances. The offsets
doesn't tend to cause a problem because offsets are rarely used so
they're pretty much always 0 already (but this PR enforces that they're
zero for the simple/fast path.) The clusters, however, were not mapped
for the fast path. This showed itself in one of two ways:
1. Before the recycled runs PR #6483, the cluster map had a 0 in every
field for the stock initialized vector.
2. After the recycled runs PR #6483, the cluster map had the previous
run's mapping in it.
This meant that when we reached the steps where glyph runs were
potentially split during the correction phase for box drawing
characters, unexpected values were present to map the glyph indices to
clusters and were corrected, adjusted, or split in an unexpected
fashion.
For instance, the index out of range bug could appear when the default 0
values appended to the end of the clusters vector were decremented down
to a negative value during the run splitter as the true DWrite cluster
mapper doesn't generate that sort of pattern in the slow path case
without also breaking the run itself.
The resolution here is therefore to ensure that all of the fields
related to glyph layout are populated even in the fast path. This
doesn't affect the slow path because that one always populated all
fields by asking DWrite to do it. The fast path just skips a bunch of
DWrite steps because it can implicitly identify patterns and save a
bunch of time.
I've also identified a few vectors that weren't cleared on reset/reuse
of the layout. I'm clearing those now so the `.resize()` operations
performed on them to get to the correct lengths will fill them with
fresh and empty values instead of hanging on to ones that may have been
from the previous. This should be OK memory perf wise because the act of
`.clear()` on a vector shouldn't free anything, just mark it invalid.
And doing `.resize()` from an empty one should just default construct
them into already allocated space (which ought to be super quick).
## Validation
* [x] Far.exe doesn't crash and looks fine
* [x] "\e[30;47m\u{2500} What \u{2500}\e[m" from #6488 appears
appropriately antialiased
* [x] Validate the "\e[30;47m\u{2500} What \u{2500}\e[m" still works
when `FillGeometry` is nerfed as a quick test that the runs are split
correctly.
* [x] Put `u{fffd} into Powershell Core to make a replacement char in
the output. Then press enter a few times and see that shrunken initial
characters on random rows. Verify this is gone.
Closes#6668Closes#6669
Co-Authored-By: Chester Liu <skyline75489@outlook.com>
## Summary of the Pull Request
This adds a first iteration on the command palette. Notable missing features are:
* Commandline mode: This will be a follow-up PR, following the merge of #6537
* nested and iterable commands: These will additionally be a follow-up PR.
This is also additionally based off the addenda in #6532.
This does not bind a key for the palette by default. That will be done when the above follow-ups are completed.
## References
* #2046 - The original command palette thread
* #5400 - This is the megathread for all command palette issues, which is tracking a bunch of additional follow up work
* #5674 and #6532 - specs
* #6537 - related
## PR Checklist
* [x] Closes#2046
- incidentally also closes#6645
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - delaying this until it's more polished.
## Detailed Description of the Pull Request / Additional comments
* There's a lot of code for autogenerating command names. That's all in `ActionArgs.cpp`, because each case is so _not_ boilerplate, unlike the rest of the code in `ActionArgs.h`.
## Validation Steps Performed
* I've been playing with this for months.
* Tests
* Selfhost with the team
Occasionally, we get users with corrupt PATH environment variables: they
can't lauch PowerShell, because for some reason it's dropped off their
PATH. We also get users who have stray applications named
`powershell.exe` just lying around in random system directories.
We can combat both of these issues by simply hardcoding where we expect
PowerShell and CMD to live. %SystemRoot% was chosen over %WINDIR%
because apparently (according to Stack Overflow), SystemPath is
read-only and WINDIR isn't.
Refs #6039, #4390, #4228 (powershell was not found)
Refs #4682, Fixes#6082 (stray powershell.exe)
1. If I delete this entire template and go my own path, the core team may close my issue without further explanation or engagement.
2. If I list multiple bugs/concerns in this one issue, the core team may close my issue without further explanation or engagement.
3. If I write an issue that has many duplicates, the core team may close my issue without further explanation or engagement (and without necessarily spending time to find the exact duplicate ID number).
4. If I leave the title incomplete when filing the issue, the core team may close my issue without further explanation or engagement.
5. If I file something completely blank in the body, the core team may close my issue without further explanation or engagement.
All good? Then proceed!
-->
<!--
This bug tracker is monitored by Windows Terminal development team and other technical folks.
**Important: When reporting BSODs or security issues, DO NOT attach memory dumps, logs, or traces to Github issues**.
Instead, send dumps/traces to secure@microsoft.com, referencing this GitHub issue.
If this is an application crash, please also provide a Feedback Hub submission link so we can find your diagnostic data on the backend. Use the category "Apps > Windows Terminal (Preview)" and choose "Share My Feedback" after submission to get the link.
Please use this form and describe your issue, concisely but precisely, with as much detail as possible.
-->
# Environment
```none
Windows build number: [run `[Environment]::OSVersion` for powershell, or `ver` for cmd]
Windows Terminal version (if applicable):
Any other software?
```
# Steps to reproduce
<!-- A description of how to trigger this bug. -->
# Expected behavior
<!-- A description of what you're expecting, possibly containing screenshots or reference material. -->
Please make sure to [search for existing issues](https://github.com/microsoft/terminal/issues) and [check the FAQ](https://github.com/microsoft/terminal/wiki/Frequently-Asked-Questions-(FAQ)) before filing a new one!
If this is an application crash, please also provide a [Feedback Hub](https://aka.ms/terminal-feedback-hub) submission link so we can find your diagnostic data on the backend. Use the category "Apps > Windows Terminal" and choose "Share My Feedback" after submission to get the link.
- type:input
attributes:
label:Windows Terminal version
placeholder:"1.7.3651.0"
description:|
You can find the version in the about dialog, or by running `wt -v` at the commandline.
validations:
required:false
- type:input
attributes:
label:Windows build number
placeholder:"10.0.19042.0"
description:|
Please run `ver` or `[Environment]::OSVersion`.
validations:
required:false
- type:textarea
attributes:
label:Other Software
description:If you're reporting a bug about our interaction with other software, what software? What versions?
placeholder:|
vim 8.2 (inside WSL)
OpenSSH_for_Windows_8.1p1
My Cool Application v0.3 (include a code snippet if it would help!)
validations:
required:false
- type:textarea
attributes:
label:Steps to reproduce
placeholder:Tell us the steps required to trigger your bug.
validations:
required:true
- type:textarea
attributes:
label:Expected Behavior
description:If you want to include screenshots, paste them into the markdown editor below.
@@ -14,7 +14,7 @@ The point of doing all this work in public is to ensure that we are holding ours
The team triages new issues several times a week. During triage, the team uses labels to categorize, manage, and drive the project workflow.
We employ [a bot engine](https://github.com/microsoft/terminal/blob/master/doc/bot.md) to help us automate common processes within our workflow.
We employ [a bot engine](https://github.com/microsoft/terminal/blob/main/doc/bot.md) to help us automate common processes within our workflow.
We drive the bot by tagging issues with specific labels which cause the bot engine to close issues, merge branches, etc. This bot engine helps us keep the repo clean by automating the process of notifying appropriate parties if/when information/follow-up is needed, and closing stale issues/PRs after reminders have remained unanswered for several days.
@@ -43,7 +43,7 @@ If no existing item describes your issue/feature, great - please file a new issu
* Have a question that you don't see answered in docs, videos, etc.? File an issue
* Want to know if we're planning on building a particular feature? File an issue
* Got a great idea for a new feature? File an issue/request/idea
* Don't understand how to do something? File an issue/Community Guidance Request
* Don't understand how to do something? File an issue
* Found an existing issue that describes yours? Great - upvote and add additional commentary / info / repro-steps / etc.
When you hit "New Issue", select the type of issue closest to what you want to report/ask/request:
@@ -99,25 +99,39 @@ If you don't have any additional info/context to add but would like to indicate
## Contributing fixes / features
For those able & willing to help fix issues and/or implement features ...
If you're able & willing to help fix issues and/or implement features, we'd love your contribution!
The best place to start is the list of ["Easy Starter"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22+label%3A%22Easy+Starter%22+) issues. These are bugs or tasks that we on the team believe would be easier to implement for someone without any prior experience in the codebase. Once you're feeling more comfortable in the codebase, feel free to just use the ["Help Wanted"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22+) label, or just find an issue your interested in and hop in!
Generally, we categorize issues in the following way, which is largely derived from our old internal work tracking system:
* ["Bugs"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Bug%22+) are parts of the Terminal & Console that are not quite working the right way. There's code to already support some scenario, but it's not quite working right. Fixing these is generally a matter of debugging the broken functionality and fixing the wrong code.
* ["Tasks"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Task%22+) are usually new pieces of functionality that aren't yet implemented for the Terminal/Console. These are usually smaller features, which we believe
- could be a single, atomic PR
- Don't require much design consideration, or we've already written the spec for the larger feature they belong to.
* ["Features"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Feature%22+) are larger pieces of new functionality. These are usually things we believe would require larger discussion of how they should be implemented, or they'll require some complicated new settings. They might just be features that are composed of many individual tasks. Often times, with features, we like to have a spec written before development work is started, to make sure we're all on the same page (see below).
Bugs and tasks are obviously the easiest to get started with, but don't feel afraid of features either! We've had some community members contribute some amazing "feature"-level work to the Terminal (albeit, with lots of discussion 😄).
Often, we like to assign issues that generally belong to somebody's area of expertise to the team member that owns that area. This doesn't mean the community can't jump in -- they should reach out and have a chat with the assignee to see if it'd okay to take. If an issue's been assigned more than a month ago, there's a good chance it's fair game to try yourself.
### To Spec or not to Spec
Some issues/features may be quick and simple to describe and understand. For such scenarios, once a team member has agreed with your approach, skip ahead to the section headed "Fork, Branch, and Create your PR", below.
Small issues that do not require a spec will be labelled Issue-Bug or Issue-Task.
Small issues that do not require a spec will be labelled `Issue-Bug` or `Issue-Task`.
However, some issues/features will require careful thought & formal design before implementation. For these scenarios, we'll request that a spec is written and the associated issue will be labeled Issue-Feature.
However, some issues/features will require careful thought & formal design before implementation. For these scenarios, we'll request that a spec is written and the associated issue will be labeled `Issue-Feature`. More often than not, we'll add such features to the ["Specification Tracker" project](https://github.com/microsoft/terminal/projects/1).
Specs help collaborators discuss different approaches to solve a problem, describe how the feature will behave, how the feature will impact the user, what happens if something goes wrong, etc. Driving towards agreement in a spec, before any code is written, often results in simpler code, and less wasted effort in the long run.
Specs will be managed in a very similar manner as code contributions so please follow the "Fork, Branch and Create your PR" below.
Specs will be managed in a very similar manner as code contributions so please follow the "[Fork, Branch and Create your PR](CONTRIBUTING.md#fork-clone-branch-and-create-your-pr)" section below.
### Writing / Contributing-to a Spec
To write/contribute to a spec: fork, branch and commit via PRs, as you would with any code changes.
Specs are written in markdown, stored under the `\doc\spec` folder and named `[issue id] - [spec description].md`.
Specs are written in markdown, stored under the [`\doc\specs`](./doc/specs) folder and named `[issue id] - [spec description].md`.
👉 **It is important to follow the spec templates and complete the requested information**. The available spec templates will help ensure that specs contain the minimum information & decisions necessary to permit development to begin. In particular, specs require you to confirm that you've already discussed the issue/idea with the team in an issue and that you provide the issue ID for reference.
@@ -125,7 +139,7 @@ Team members will be happy to help review specs and guide them to completion.
### Help Wanted
Once the team have approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help%20Wanted).
Once the team has approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help%20Wanted).
---
@@ -140,6 +154,13 @@ Once you've discussed your proposed feature/fix/etc. with a team member, and you
1. Create & push a feature branch
1. Create a [Draft Pull Request (PR)](https://github.blog/2019-02-14-introducing-draft-pull-requests/)
1. Work on your changes
1. Build and see if it works. Consult [How to build OpenConsole](./doc/building.md) if you have problems.
### Testing
Testing is a key component in the development workflow. Both Windows Terminal and Windows Console use TAEF(the Test Authoring and Execution Framework) as the main framework for testing.
If your changes affect existing test cases, or you're working on brand new features and also the accompanying test cases, see [TAEF](./doc/TAEF.md) for more information about how to validate your work locally.
### Code Review
@@ -149,7 +170,7 @@ When you'd like the team to take a look, (even if the work is not yet fully-comp
### Merge
Once your code has been reviewed and approved by the requisite number of team members, it will be merged into the master branch. Once merged, your PR will be automatically closed.
Once your code has been reviewed and approved by the requisite number of team members, it will be merged into the main branch. Once merged, your PR will be automatically closed.
* [Windows Terminal Documentation](https://docs.microsoft.com/windows/terminal) ([Repo: Contribute to the docs](https://github.com/MicrosoftDocs/terminal))
> 👉 Note: Windows Terminal requires Windows 10 1903 (build 18362) or later
> 🔴 Note: Windows Terminal requires Windows 10 2004 (build 19041) or later
### Microsoft Store [Recommended]
Install the [Windows Terminal from the Microsoft Store][store-install-link]. This allows you to always be on the latest version when we release new builds with automatic upgrades.
Install the [Windows Terminal from the Microsoft Store][store-install-link].
This allows you to always be on the latest version when we release new builds
with automatic upgrades.
This is our preferred method.
@@ -29,16 +35,34 @@ This is our preferred method.
#### Via GitHub
For users who are unable to install Terminal from the Microsoft Store, Terminal builds can be manually downloaded from this repository's [Releases page](https://github.com/microsoft/terminal/releases).
For users who are unable to install Windows Terminal from the Microsoft Store,
released builds can be manually downloaded from this repository's [Releases
> * Be sure to install the [Desktop Bridge VC++ v14 Redistributable Package](https://www.microsoft.com/en-us/download/details.aspx?id=53175) otherwise Terminal may not install and/or run and may crash at startup
> * Terminal will not auto-update when new builds are released so you will need to regularly install the latest Terminal release to receive all the latest fixes and improvements!
> * Terminal will not auto-update when new builds are released so you will need
> to regularly install the latest Terminal release to receive all the latest
> fixes and improvements!
#### Via Windows Package Manager CLI (aka winget)
[winget](https://github.com/microsoft/winget-cli) users can download and install the latest Terminal release by installing the `Microsoft.WindowsTerminal` package:
[winget](https://github.com/microsoft/winget-cli) users can download and install
the latest Terminal release by installing the `Microsoft.WindowsTerminal`
[Chocolatey](https://chocolatey.org) users can download and install the latest Terminal release by installing the `microsoft-windows-terminal` package:
[Chocolatey](https://chocolatey.org) users can download and install the latest
Terminal release by installing the `microsoft-windows-terminal` package:
```powershell
chocoinstallmicrosoft-windows-terminal
@@ -58,70 +83,144 @@ To upgrade Windows Terminal using Chocolatey, run the following:
chocoupgrademicrosoft-windows-terminal
```
If you have any issues when installing/upgrading the package please go to the [Windows Terminal package page](https://chocolatey.org/packages/microsoft-windows-terminal) and follow the [Chocolatey triage process](https://chocolatey.org/docs/package-triage-process)
If you have any issues when installing/upgrading the package please go to the
[Windows Terminal package
page](https://chocolatey.org/packages/microsoft-windows-terminal) and follow the
Please take a few minutes to review the overview below before diving into the code:
Please take a few minutes to review the overview below before diving into the
code:
### Windows Terminal
Windows Terminal is a new, modern, feature-rich, productive terminal application for command-line users. It includes many of the features most frequently requested by the Windows command-line community including support for tabs, rich text, globalization, configurability, theming & styling, and more.
Windows Terminal is a new, modern, feature-rich, productive terminal application
for command-line users. It includes many of the features most frequently
requested by the Windows command-line community including support for tabs, rich
text, globalization, configurability, theming & styling, and more.
The Terminal will also need to meet our goals and measures to ensure it remains fast and efficient, and doesn't consume vast amounts of memory or power.
The Terminal will also need to meet our goals and measures to ensure it remains
fast and efficient, and doesn't consume vast amounts of memory or power.
### The Windows Console Host
The Windows Console host, `conhost.exe`, is Windows' original command-line user experience. It also hosts Windows' command-line infrastructure and the Windows Console API server, input engine, rendering engine, user preferences, etc. The console host code in this repository is the actual source from which the `conhost.exe` in Windows itself is built.
The Windows Console host, `conhost.exe`, is Windows' original command-line user
experience. It also hosts Windows' command-line infrastructure and the Windows
Console API server, input engine, rendering engine, user preferences, etc. The
console host code in this repository is the actual source from which the
`conhost.exe` in Windows itself is built.
Since taking ownership of the Windows command-line in 2014, the team added several new features to the Console, including background transparency, line-based selection, support for [ANSI / Virtual Terminal sequences](https://en.wikipedia.org/wiki/ANSI_escape_code), [24-bit color](https://devblogs.microsoft.com/commandline/24-bit-color-in-the-windows-console/), a [Pseudoconsole ("ConPTY")](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/), and more.
Since taking ownership of the Windows command-line in 2014, the team added
several new features to the Console, including background transparency,
line-based selection, support for [ANSI / Virtual Terminal
However, because Windows Console's primary goal is to maintain backward compatibility, we have been unable to add many of the features the community (and the team) have been wanting for the last several years including tabs, unicode text, and emoji.
However, because Windows Console's primary goal is to maintain backward
compatibility, we have been unable to add many of the features the community
(and the team) have been wanting for the last several years including tabs,
unicode text, and emoji.
These limitations led us to create the new Windows Terminal.
> You can read more about the evolution of the command-line in general, and the Windows command-line specifically in [this accompanying series of blog posts](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/) on the Command-Line team's blog.
> You can read more about the evolution of the command-line in general, and the
> Windows command-line specifically in [this accompanying series of blog
While overhauling Windows Console, we modernized its codebase considerably, cleanly separating logical entities into modules and classes, introduced some key extensibility points, replaced several old, home-grown collections and containers with safer, more efficient [STL containers](https://docs.microsoft.com/en-us/cpp/standard-library/stl-containers?view=vs-2019), and made the code simpler and safer by using Microsoft's [Windows Implementation Libraries - WIL](https://github.com/Microsoft/wil).
While overhauling Windows Console, we modernized its codebase considerably,
cleanly separating logical entities into modules and classes, introduced some
key extensibility points, replaced several old, home-grown collections and
This overhaul resulted in several of Console's key components being available for re-use in any terminal implementation on Windows. These components include a new DirectWrite-based text layout and rendering engine, a text buffer capable of storing both UTF-16 and UTF-8, a VT parser/emitter, and more.
This overhaul resulted in several of Console's key components being available
for re-use in any terminal implementation on Windows. These components include a
new DirectWrite-based text layout and rendering engine, a text buffer capable of
storing both UTF-16 and UTF-8, a VT parser/emitter, and more.
### Creating the new Windows Terminal
When we started planning the new Windows Terminal application, we explored and evaluated several approaches and technology stacks. We ultimately decided that our goals would be best met by continuing our investment in our C++ codebase, which would allow us to reuse several of the aforementioned modernized components in both the existing Console and the new Terminal. Further, we realized that this would allow us to build much of the Terminal's core itself as a reusable UI control that others can incorporate into their own applications.
When we started planning the new Windows Terminal application, we explored and
evaluated several approaches and technology stacks. We ultimately decided that
our goals would be best met by continuing our investment in our C++ codebase,
which would allow us to reuse several of the aforementioned modernized
components in both the existing Console and the new Terminal. Further, we
realized that this would allow us to build much of the Terminal's core itself as
a reusable UI control that others can incorporate into their own applications.
The result of this work is contained within this repo and delivered as the Windows Terminal application you can download from the Microsoft Store, or [directly from this repo's releases](https://github.com/microsoft/terminal/releases).
The result of this work is contained within this repo and delivered as the
Windows Terminal application you can download from the Microsoft Store, or
* [Command-Line Backgrounder Blog Series](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/)
* Windows Terminal Launch: [Terminal "Sizzle Video"](https://www.youtube.com/watch?v=8gw0rXPMMPE&list=PLEHMQNlPj-Jzh9DkNpqipDGCZZuOwrQwR&index=2&t=0s)
* Windows Terminal Launch: [Build 2019 Session](https://www.youtube.com/watch?v=KMudkRcwjCw)
* Run As Radio: [Show 645 - Windows Terminal with Richard Turner](http://www.runasradio.com/Shows/Show/645)
*Azure Devops Podcast: [Episode 54 - Kayla Cinnamon and Rich Turner on DevOps on the Windows Terminal](http://azuredevopspodcast.clear-measure.com/kayla-cinnamon-and-rich-turner-on-devops-on-the-windows-terminal-team-episode-54)
* Microsoft Ignite 2019 Session: [The Modern Windows Command Line: Windows Terminal - BRK3321](https://myignite.techcommunity.microsoft.com/sessions/81329?source=sessions)
@@ -131,62 +230,90 @@ For more information about Windows Terminal, you may find some of these resource
Cause: You're launching the incorrect solution in Visual Studio.
Solution: Make sure you're building & deploying the `CascadiaPackage` project in Visual Studio.
Solution: Make sure you're building & deploying the `CascadiaPackage` project in
Visual Studio.
> ⚠ Note: `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic Windows Console that hosts Windows' command-line infrastructure. OpenConsole is used by Windows Terminal to connect to and communicate with command-line applications (via [ConPty](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/)).
> ⚠ Note: `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic
> Windows Console that hosts Windows' command-line infrastructure. OpenConsole
> is used by Windows Terminal to connect to and communicate with command-line
All project documentation is located at aka.ms/terminal-docs. If you would like to contribute to the documentation, please submit a pull request on the [Windows Terminal Documentation repo](https://github.com/MicrosoftDocs/terminal).
All project documentation is located at [aka.ms/terminal-docs](https://aka.ms/terminal-docs). If you would like
to contribute to the documentation, please submit a pull request on the [Windows
We are excited to work alongside you, our amazing community, to build and enhance Windows Terminal\!
We are excited to work alongside you, our amazing community, to build and
enhance Windows Terminal\!
***BEFORE you start work on a feature/fix***, please read & follow our [Contributor's Guide](https://github.com/microsoft/terminal/blob/master/CONTRIBUTING.md) to help avoid any wasted or duplicate effort.
***BEFORE you start work on a feature/fix***, please read & follow our
[Contributor's
Guide](https://github.com/microsoft/terminal/blob/main/CONTRIBUTING.md) to
help avoid any wasted or duplicate effort.
## Communicating with the Team
The easiest way to communicate with the team is via GitHub issues.
Please file new issues, feature requests and suggestions, but **DO search for similar open/closed pre-existing issues before creating a new issue.**
Please file new issues, feature requests and suggestions, but **DO search for
similar open/closed pre-existing issues before creating a new issue.**
If you would like to ask a question that you feel doesn't warrant an issue (yet), please reach out to us via Twitter:
If you would like to ask a question that you feel doesn't warrant an issue
(yet), please reach out to us via Twitter:
* Kayla Cinnamon, Program Manager: [@cinnamon\_msft](https://twitter.com/cinnamon_msft)
* Leonard Hecker, Developer: [@LeonardHecker](https://twitter.com/LeonardHecker)
## Developer Guidance
## Prerequisites
* You must be running Windows 1903 (build >= 10.0.18362.0) or later to run Windows Terminal
* You must [enable Developer Mode in the Windows Settings app](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development) to locally install and run Windows Terminal
* You must have the [Windows 10 1903 SDK](https://developer.microsoft.com/en-us/windows/downloads/windows-10-sdk) installed
* You must have at least [VS 2019](https://visualstudio.microsoft.com/downloads/) installed
* You must install the following Workloads via the VS Installer. Note: Opening the solution in VS 2019 will [prompt you to install missing components automatically](https://devblogs.microsoft.com/setup/configure-visual-studio-across-your-organization-with-vsconfig/):
* You must be running Windows 10 2004 (build >= 10.0.19041.0) or later to run
Windows Terminal
* You must [enable Developer Mode in the Windows Settings
* You must install the [.NET Framework Targeting Pack](https://docs.microsoft.com/dotnet/framework/install/guide-for-developers#to-install-the-net-framework-developer-pack-or-targeting-pack) to build test projects
## Building the Code
This repository uses [git submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its dependencies. To make sure submodules are restored or updated, be sure to run the following prior to building:
This repository uses [git
submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its
dependencies. To make sure submodules are restored or updated, be sure to run
the following prior to building:
```shell
git submodule update --init --recursive
```
OpenConsole.sln may be built from within Visual Studio or from the command-line using a set of convenience scripts & tools in the **/tools** directory:
OpenConsole.sln may be built from within Visual Studio or from the command-line
using a set of convenience scripts & tools in the **/tools** directory:
### Building in PowerShell
@@ -205,31 +332,44 @@ bcz
## Running & Debugging
To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the Solution Explorer) and go to properties. In the Debug menu, change "Application process" and "Background task process" to "Native Only".
To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the
Solution Explorer) and go to properties. In the Debug menu, change "Application
process" and "Background task process" to "Native Only".
You should then be able to build & debug the Terminal project by hitting <kbd>F5</kbd>.
You should then be able to build & debug the Terminal project by hitting
<kbd>F5</kbd>. Make sure to select either the "x64" or the "x86" platform - the
Terminal doesn't build for "Any Cpu" (because the Terminal is a C++ application,
not a C# one).
> 👉 You will _not_ be able to launch the Terminal directly by running the WindowsTerminal.exe. For more details on why, see [#926](https://github.com/microsoft/terminal/issues/926), [#4043](https://github.com/microsoft/terminal/issues/4043)
> 👉 You will _not_ be able to launch the Terminal directly by running the
> WindowsTerminal.exe. For more details on why, see
Please review these brief docs below about our coding practices.
> 👉 If you find something missing from these docs, feel free to contribute to any of our documentation files anywhere in the repository (or write some new ones!)
> 👉 If you find something missing from these docs, feel free to contribute to
> any of our documentation files anywhere in the repository (or write some new
> ones!)
This is a work in progress as we learn what we'll need to provide people in order to be effective contributors to our project.
This is a work in progress as we learn what we'll need to provide people in
order to be effective contributors to our project.
* [Exceptions in our legacy codebase](https://github.com/microsoft/terminal/blob/main/doc/EXCEPTIONS.md)
* [Helpful smart pointers and macros for interfacing with Windows in WIL](https://github.com/microsoft/terminal/blob/main/doc/WIL.md)
---
# Code of Conduct
## Code of Conduct
This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
This project has adopted the [Microsoft Open Source Code of
Conduct][conduct-code]. For more information see the [Code of Conduct
FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any
This project uses [GitHub issues][gh-issue] to [track bugs][gh-bug] and [feature requests][gh-feature]. Please search the existing issues before filing new issues to avoid duplicates. For new topics, file your bug or feature request as a new issue.
For help and questions about using this project, please look at the [docs site for Windows Terminal][docs] and our [Contributor's Guide][contributor] if you want to work on Windows Terminal.
## Microsoft Support Policy
Support for Windows Terminal is limited to the resources listed above.
<Command>call%HELIX_CORRELATION_PAYLOAD%\runtests.cmd/select:"(@Name='$($testClass.Name)*'$(if($testSuiteExists){"and not @TestSuite='*'"}))$($TaefQueryToAppend)"</Command>
Write-Host" Test $($testResult.testCaseTitle) passed on $passCount of $attemptCount attempts, which is greater than or equal to the $RerunPassesRequiredToAvoidFailure passes required to avoid being marked as failed. Marking as unreliable."
}
else
{
Write-Host" Test $($testResult.testCaseTitle) passed on only $passCount of $attemptCount attempts, which is less than the $RerunPassesRequiredToAvoidFailure passes required to avoid being marked as failed. Marking as failed."
<!-- Mandatory. Major version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Mandatory. Minor version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Mandatory, defaults to 0. Patch version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Optional, defaults to empty. Prerelease version number of the PGO database which should match the version of the product. This can be hardcoded or obtained from other sources in build system. -->
<!-- Copying the PGO runtime brings along a CRT. If we do that under normal circumstances, WAPPROJ will get its grubby hands on it and mess up all the CRT shenanigans we have to pull to make MSIX packages happy. So only pull it in for Instrument builds.-->
<!-- This file is read by XES, which we use in our Release builds. -->
<PropertyGroup Label="Version">
<!--
The Windows 11 build is going to have the same package name, so it *must* have a different version.
The easiest way for us to do this is to add 1 to the revision field.
In short, for a given Terminal build 1.11, we will emit two different versions (assume this is build
4 on day 23 of the year):
- 1.11.234.0 for Windows 10
- 1.11.235.0 for Windows 11
This presents a potential for conflicts if we want to ship two builds produced back to back on the
same day... which is terribly unlikely.
-->
<VersionBuildRevision Condition="'$(TerminalTargetWindowsVersion)'=='Win11' and '$(VersionBuildRevision)'!=''">$([MSBuild]::Add($(VersionBuildRevision), 1))</VersionBuildRevision>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
