Up to now we've using `U+2E2E` (reverse question mark) to represent the
`SUB` control glyph. This PR changes the glyph to `U+2426` (substitute
form two), which is also rendered as a reverse question mark, but is
more semantically correct.
The original `SUB` control rendering was implemented in PR #15075.
I've manually confirmed that `printf "\x1A"` is now shown as a reverse
question mark in OpenConsole when using the Cascadia Code font. That
would not previously have worked, because `U+2E2E` is not supported by
Cascadia Code.
Closes#16558
This change adds a different label to the property sheet which will be
displayed when conhostv1 is missing. It explains why the legacy console
checkbox is not enabled.
Related work items: MSFT-46195288
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 41871b6f4c0bba64852bfbaa9255f7677246d6fe
In the Settings UI's Color Scheme page (where you edit the color scheme itself), update the color chip buttons to include the RGB value in the tooltip and screen reader announcements.
Closes#15985Closes#15983
## Validation Steps Performed
Tooltip and screen reader announcement is updated on launch and when a new value is selected.
This PR enables alternate scroll mode by default, and also fixes the
precedence so if there is any other mouse tracking mode enabled, that
will take priority.
## Validation Steps Performed
I've manually tested by viewing a file with `less`, and confirmed that
it can now scroll using the mouse wheel by default. Also tested mouse
mouse in vim and confirmed that still works.
## PR Checklist
Closes#13187
This pull request started out very differently. I was going to move all
the EDP code from the internal `conint` project into the public, because
EDP is [fully documented]!
Well, it doesn't have any headers in the SDK.
Or import libraries.
And it's got a deprecation notice:
> [!NOTE]
> Starting in July 2022, Microsoft is deprecating Windows Information
> Protection (WIP) and the APIs that support WIP. Microsoft will
continue
> to support WIP on supported versions of Windows. New versions of
Windows
> won't include new capabilities for WIP, and it won't be supported in
> future versions of Windows.
So I'm blasting it out the airlock instead.
[fully documented]:
https://learn.microsoft.com/en-us/windows/win32/devnotes/windows-information-protection-api
The tolerance value for a similar repo was changed from 0.8 to 0.75.
This is because I changed the backend service for this to use pinecone
instead of Azure AI search (see here
f72fa59e23
) and the metric changed as a result of that. They are slightly lower
than they were before, so this should offset that.
While #16444 left wavy lines in an amazing state already, there were
a few more things that could be done to make GDI look more consistent
with other well known Windows applications.
But before that, a couple unrelated, but helpful changes were made:
* `GdiEngine::UpdateFont` was heavily modified to do all calculations
in floats. All modern CPUs have fast FPUs and even the fairly slow
`lroundf` function is so fast (relatively) nowadays that in a cold
path like this, we can liberally call it to convert back to `int`s.
This makes intermediate calculation more accurate and consistent.
* `GdiEngine::PaintBufferGridLines` was exception-unsafe due to its
use of a `std::vector` with catch clause and this PR fixes that.
Additionally, the vector was swapped out with a `til::small_vector`
to reduce heap allocations. (Arena allocators!)
* RenderingTests was updated to cover styled underlines
With that in place, these improvements were done:
* Word's double-underline algorithm was ported over from `AtlasEngine`.
It uses a half underline-width (aka `thinLineWidth`) which will now
also be used for wavy lines to make them look a bit more filigrane.
* The Bézier curve for wavy/curly underlines was modified to use
control points at (0.5,0.5) and (0.5,-0.5) respectively. This results
in a maxima at y=0.1414 which is much closer to a sine curve with a
maxima at 1/(2pi) = 0.1592. Previously, the maxima was a lot higher
(roughly 4x) depending on the aspect ratio of the glyphs.
* Wavy underlines don't depend on the aspect ratio of glyphs anymore.
This previously led to several problems depending on the exact font.
The old renderer would draw exactly 3 periods of the wave into
each cell which would also ensure continuity between cells.
Unfortunately, this meant that waves could look inconsistent.
The new approach always uses the aforementioned sine-like waves.
* The wavy underline offset was clamped so that it's never outside of
bounds of a line. This avoids clipping.
* Compile RenderingTests and run it
* Using Consolas, MS Gothic and Cascadia Code while Ctrl+Scrolling
up and down works as expected without clipping ✅
(cherry picked from commit 99193c9a3f)
Service-Card-Id: 91356394
Service-Version: 1.19
Fixes Curlyline being drawn as single underline in some cases
**Detailed Description**
- Curlyline is drawn at all font sizes.
- We might render a curlyline that is clipped in cases where we don't
have enough space to draw a full curlyline. This is to give users a
consistent view of Curlylines. Previously in those cases, it was drawn
as a single underline.
- Removed minimum threshold `minCurlyLinePeakHeight` for Curlyline
drawing.
- GDIRender changes:
- Underline offset now points to the (vertical) mid position of the
underline. Removes redundant `underlineMidY` calculation inside the draw
call.
Closes#16288
(cherry picked from commit f5b45c25c9)
Service-Card-Id: 91349182
Service-Version: 1.19
Add support for underline style and color in the renderer
> [!IMPORTANT]
> The PR adds underline style and color feature to AtlasEngine (WT) and
GDIRenderer (Conhost) only.
After the underline style and color feature addition to Conpty, this PR
takes it further and add support for rendering them to the screen!
Out of five underline styles, we already supported rendering for 3 of
those types (Singly, Doubly, Dotted) in some form in our (Atlas)
renderer. The PR adds the remaining types, namely, Dashed and Curly
underlines support to the renderer.
- All renderer engines now receive both gridline and underline color,
and the latter is used for drawing the underlines. **When no underline
color is set, we use the foreground color.**
- Curly underline is rendered using `sin()` within the pixel shader.
- To draw underlines for DECDWL and DECDHL, we send the line rendition
scale within `QuadInstance`'s texcoord attribute.
- In GDI renderer, dashed and dotted underline is drawn using `HPEN`
with a desired style. Curly line is a cubic Bezier that draws one wave
per cell.
## PR Checklist
- ✅ Set the underline color to underlines only, without affecting the
gridline color.
- ❌ Port to DX renderer. (Not planned as DX renderer soon to be replaced
by **AtlasEngine**)
- ✅ Port underline coloring and style to GDI renderer (Conhost).
- ✅ Wide/Tall `CurlyUnderline` variant for `DECDWL`/`DECDHL`.
Closes#7228
(cherry picked from commit e268c1c952)
Service-Card-Id: 91349180
Service-Version: 1.19
Even with the previous fixes we still randomly encounter win32-
input-mode sequences that are broken up in exactly such a way that
e.g. lone escape keys are encounters. Those for instance clear the
current prompt. The remaining parts of the sequence are then visible.
This changeset fixes the issue by skipping the entire force-to-ground
code whenever we saw at least 1 win32-input-mode sequence.
Related to #16343
## Validation Steps Performed
* Host a ConPTY inside ConPTY (= double the trouble) with cmd.exe
* Paste random amounts of text
* In the old code spurious `[..._` strings are seen
* In the new code they're consistently gone ✅
(cherry picked from commit bc18348967)
Service-Card-Id: 91337332
Service-Version: 1.19
Added wrapping to highlighted selection when selecting a word, added
tests for it
## Detailed Description of the Pull Request / Additional comments
- Modified GetWordStart and GetWordEnd and their helpers to no longer be
bounded by the right and left viewport ranges
- Kept same functionality (does not wrap) when selecting wrapped
whitespace
- Added tests to TextBufferTests.cpp to include cases of wrapping text
## Validation Steps Performed
- Ran locally and verified selection works properly
- Tests passed locally
Closes#4009
Even with the previous fixes we still randomly encounter win32-
input-mode sequences that are broken up in exactly such a way that
e.g. lone escape keys are encounters. Those for instance clear the
current prompt. The remaining parts of the sequence are then visible.
This changeset fixes the issue by skipping the entire force-to-ground
code whenever we saw at least 1 win32-input-mode sequence.
Related to #16343
## Validation Steps Performed
* Host a ConPTY inside ConPTY (= double the trouble) with cmd.exe
* Paste random amounts of text
* In the old code spurious `[..._` strings are seen
* In the new code they're consistently gone ✅
This makes 3 improvements:
* 16x larger input buffer size improves behavior when pasting
clipboard contents while the win32-input-mode is enabled,
as each input character is roughly 15-20x longer after encoding.
* Translate UTF8 to UTF16 outside of the console lock.
* Preserve the UTF16 buffer between reads for less mallocs.
(cherry picked from commit 171a21ad48)
Service-Card-Id: 91347494
Service-Version: 1.19
This is just a minor, unimportant cleanup to remove code duplication
in `_flushBuffer`, which called `SetCursorPosition` twice each time
the cursor position changed.
17cc109 and e9de646 both made the same mistake: When cleaning up our
telemetry code they also removed the calls to `TraceLoggingRegister`
which also broke regular tracing. Windows Defender in particular uses
the "CookedRead" event to monitor for malicious shell commands.
This doesn't fix it the "right way", because destructors of statics
aren't executed when DLLs are unloaded. But I felt like that this is
fine because we have way more statics than that in conhost land,
all of which have the same kind of issue.
While #16444 left wavy lines in an amazing state already, there were
a few more things that could be done to make GDI look more consistent
with other well known Windows applications.
But before that, a couple unrelated, but helpful changes were made:
* `GdiEngine::UpdateFont` was heavily modified to do all calculations
in floats. All modern CPUs have fast FPUs and even the fairly slow
`lroundf` function is so fast (relatively) nowadays that in a cold
path like this, we can liberally call it to convert back to `int`s.
This makes intermediate calculation more accurate and consistent.
* `GdiEngine::PaintBufferGridLines` was exception-unsafe due to its
use of a `std::vector` with catch clause and this PR fixes that.
Additionally, the vector was swapped out with a `til::small_vector`
to reduce heap allocations. (Arena allocators!)
* RenderingTests was updated to cover styled underlines
With that in place, these improvements were done:
* Word's double-underline algorithm was ported over from `AtlasEngine`.
It uses a half underline-width (aka `thinLineWidth`) which will now
also be used for wavy lines to make them look a bit more filigrane.
* The Bézier curve for wavy/curly underlines was modified to use
control points at (0.5,0.5) and (0.5,-0.5) respectively. This results
in a maxima at y=0.1414 which is much closer to a sine curve with a
maxima at 1/(2pi) = 0.1592. Previously, the maxima was a lot higher
(roughly 4x) depending on the aspect ratio of the glyphs.
* Wavy underlines don't depend on the aspect ratio of glyphs anymore.
This previously led to several problems depending on the exact font.
The old renderer would draw exactly 3 periods of the wave into
each cell which would also ensure continuity between cells.
Unfortunately, this meant that waves could look inconsistent.
The new approach always uses the aforementioned sine-like waves.
* The wavy underline offset was clamped so that it's never outside of
bounds of a line. This avoids clipping.
## Validation Steps Performed
* Compile RenderingTests and run it
* Using Consolas, MS Gothic and Cascadia Code while Ctrl+Scrolling
up and down works as expected without clipping ✅
**FIRST TIME CONTRIBUTOR**
Follows the existing selection code as much as possible.
Updated logic that finds selection rectangles to also identify search
rectangles.
Right now, this feature only works in the new Atlas engine -- it uses
the background and foreground color bitmaps to quickly and efficiently
set the colors of a whole region of text.
Closes#7561
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
This makes 3 improvements:
* 16x larger input buffer size improves behavior when pasting
clipboard contents while the win32-input-mode is enabled,
as each input character is roughly 15-20x longer after encoding.
* Translate UTF8 to UTF16 outside of the console lock.
* Preserve the UTF16 buffer between reads for less mallocs.
The `GenRTF(...)` was using `\highlight` control word for sending
background text color in the RTF format during a copy command. This
doesn't work correctly, since many applications (E.g. MSWord) don't
support full RGB with `\highlight`, and instead uses an approximation of
what is received. For example, `rgb(197, 15, 31)` becomes `rgb(255, 0,
255)`. Also, the standard way of using background colors is `\cbN`
control word, which isn't supported as per the [RTF Spec 1.9.1]
in Word.
But it briefly mentioned a workaround at Pg. 23, which seems to work on
all the RTF editors I tested.
The PR makes the changes to use `\chshdng0\chcbpatN` for the background
coloring.
Also did some refactoring to make the implementation concise.
## Validation Steps Performed
Verified that the background is correctly copied on below editors:
- MSWord
- WordPad
- LibreOffice
- Outlook
[RTF Spec 1.9.1]: https://msopenspecs.azureedge.net/files/Archive_References/[MSFT-RTF].pdf
(cherry picked from commit 310814bb30)
Service-Card-Id: 91349195
Service-Version: 1.19
Fixes Curlyline being drawn as single underline in some cases
**Detailed Description**
- Curlyline is drawn at all font sizes.
- We might render a curlyline that is clipped in cases where we don't
have enough space to draw a full curlyline. This is to give users a
consistent view of Curlylines. Previously in those cases, it was drawn
as a single underline.
- Removed minimum threshold `minCurlyLinePeakHeight` for Curlyline
drawing.
- GDIRender changes:
- Underline offset now points to the (vertical) mid position of the
underline. Removes redundant `underlineMidY` calculation inside the draw
call.
Closes#16288
This prevents an issue in conhost where older versions of Windows
Terminal (including the ones currently inbox in Windows, as well as
stable and preview) will *still* cause WSL interop to hang on startup.
Since VT input is erroneously re-encoded as Win32 input events on those
versions, we need to make sure we request the cursor position *before*
enabling Win32 input mode. That way, the CPR we get back is properly
encoded.
(cherry picked from commit 17867af534)
Service-Card-Id: 91301135
Service-Version: 1.19
This prevents an issue in conhost where older versions of Windows
Terminal (including the ones currently inbox in Windows, as well as
stable and preview) will *still* cause WSL interop to hang on startup.
Since VT input is erroneously re-encoded as Win32 input events on those
versions, we need to make sure we request the cursor position *before*
enabling Win32 input mode. That way, the CPR we get back is properly
encoded.
Changes any references of `> **Note**\` with `> [!NOTE]` to match the
new syntax for markdown files in GitHub.
Fixes the 14 November 2023 update to the alerts syntax in markdown
files:
> ## Update - 14 November 2023
> * The initial syntax using e.g. **Note** isn't supported any longer.
>
> https://github.com/orgs/community/discussions/16925
This changeset fixes an issue caused by #15991 where "chunked" escape
sequences would get corrupted. The fix is to simply not flush eagerly
anymore. I tried my best to keep the input lag reduction from #15991,
but unfortunately this isn't possible for console APIs.
Closes#16079
## Validation Steps Performed
* `type ascii.com` produces soft font ASCII characters ✅
(cherry picked from commit bdf2f6f274)
Service-Card-Id: 91283205
Service-Version: 1.19
This is my proposal to avoid aborting ConPTY input parsing because a
read accidentally got split up into more than one chunk. This happens a
lot with WSL for me, as I often get (for instance) a
`\x1b[67;46;99;0;32;` input followed immediately by a `1_` input. The
current logic would cause both of these to be flushed out to the client
application.
This PR fixes the issue by only flushing either a standalone escape
character or a escape+character combination. It basically limits the
previous code to just `VTStates::Ground` and `VTStates::Escape`.
I'm not using the `_state` member, because `VTStates::OscParam` makes no
distinction between `\x1b]` and `\x1b]1234` and I only want to flush the
former. I felt like checking the contents of `run` directly is easier to
understand.
Related to #16343
## Validation Steps Performed
* win32-input-mode sequences are now properly buffered ✅
* Standalone alt-key combinations are still being flushed ✅
(cherry picked from commit 5f5ef10571)
Service-Card-Id: 91270261
Service-Version: 1.19
Upgrades check-spelling to [v0.0.22](https://github.com/check-spelling/check-spelling/releases/tag/v0.0.22)
* refreshes workflow
* enables dependabot PRs to trigger CI (so that in the future you'll be
able to see breaking changes to the dictionary paths)
* refreshes metadata
* built-in handling of `\n`/`\r`/`\t` is removed -- This means that the
`patterns/0_*.txt` files can be removed.
* this specific PR includes some shim content, in
`allow/check-spelling-0.0.21.txt` -- once it this PR merges, it can be
removed on a branch and the next CI will clean out items from
`expect.txt` relating to the `\r` stuff and suggest replacement content.
* talking to the bot is enabled for forks (but not the master
repository)
* SARIF reporting is enabled for PRs w/in a single repository (not
across forks)
* In job reports, there's a summary table (space permitting) linking to
instances (this is a poor man's SARIF report)
* When a pattern splits a thing that results in check-spelling finding
an unrecognized token, that's reported with a distinct category
* When there are items in expect that not longer match anything but more
specific items do (e.g. `microsoft` vs. `Microsoft`), there's now a
specific category with help/advice
* Fancier excludes suggestions (excluding directories, file types, ...)
* Refreshed dictionaries
* The comment now links to the job summary (which includes SARIF link if
available, the details view, and a generated commit that people can use
if they're ok w/ the expect changes and don't want to run perl)
Validation
----------
1. the branch was developed in
https://github.com/check-spelling-sandbox/terminal/actions?query=branch%3Acheck-spelling-0.0.22
2. ensuring compatibility with 0.0.21 was done in
https://github.com/check-spelling-sandbox/terminal/pull/3
3. this version has been in development for a year and has quite a few
improvements, we've been actively dogfooding it throughout this period 😄
Additional Fixes
----------------
spelling: the
spelling: shouldn't
spelling: no
spelling: macos
spelling: github
spelling: fine-grained
spelling: coarse-grained
Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
## Summary of the Pull Request
Added some Punctuation Marks as Required.
## References and Relevant Issues
None.
## Detailed Description of the Pull Request / Additional comments
There were some missing Punctuation Marks(Ex: Colon(:) and Full
Stop(.)), so I have added them.
## Validation Steps Performed
This is my proposal to avoid aborting ConPTY input parsing because a
read accidentally got split up into more than one chunk. This happens a
lot with WSL for me, as I often get (for instance) a
`\x1b[67;46;99;0;32;` input followed immediately by a `1_` input. The
current logic would cause both of these to be flushed out to the client
application.
This PR fixes the issue by only flushing either a standalone escape
character or a escape+character combination. It basically limits the
previous code to just `VTStates::Ground` and `VTStates::Escape`.
I'm not using the `_state` member, because `VTStates::OscParam` makes no
distinction between `\x1b]` and `\x1b]1234` and I only want to flush the
former. I felt like checking the contents of `run` directly is easier to
understand.
Related to #16343
## Validation Steps Performed
* win32-input-mode sequences are now properly buffered ✅
* Standalone alt-key combinations are still being flushed ✅
`EnableScrollbar()` and especially `SetScrollInfo()` are prohibitively
expensive functions nowadays. This improves throughput of good old
`type` in cmd.exe by ~10x, by briefly releasing the console lock.
## Validation Steps Performed
* `type`ing a file in `cmd` is as fast while the window is scrolling
as it is while it isn't scrolling ✅
* Scrollbar pops in and out when scroll-forward is disabled ✅
When ConPTY exits it should attempt to restore the state as it was
before it started. This is particularly important for the win32
input mode sequences, as Linux shells don't know what to do with it.
Related to #16343
## Validation Steps Performed
* Replace conhost with this
* Launch a Win32 application inside WSL
* Exit that application
* Shell prompt doesn't get filled with win32 input mode sequences ✅
(cherry picked from commit 70e51ae28d)
Service-Card-Id: 91246943
Service-Version: 1.19
When ConPTY exits it should attempt to restore the state as it was
before it started. This is particularly important for the win32
input mode sequences, as Linux shells don't know what to do with it.
Related to #16343
## Validation Steps Performed
* Replace conhost with this
* Launch a Win32 application inside WSL
* Exit that application
* Shell prompt doesn't get filled with win32 input mode sequences ✅
The final parameter, `updateBottom`, controls not just whether the
`_virtualBottom` is updated, but also whether the position is clamped
to be within the existing `_virtualBottom`. Setting this to `false`
thus broke scroll-forward as the `_virtualBottom` was now a constant.
## Validation Steps Performed
* Disable scroll-foward
* Press and hold Ctrl+C
* It scrolls past the viewport bottom ✅
(cherry picked from commit ab7a2f10c5)
Service-Card-Id: 91258882
Service-Version: 1.19
This changeset avoids re-encoding output from `AdaptDispatch`
via the win32-input-mode mechanism when VT input is enabled.
That is, an `AdaptDispatch` output like `\x1b[C` would otherwise
result in dozens of characters of input.
Related to #16343
## Validation Steps Performed
* Replace conhost with this
* Launch a Win32 application inside WSL
* ASCII keyboard inputs are represented as single `INPUT_RECORD`s ✅
(cherry picked from commit 0da37a134a)
Service-Card-Id: 91246942
Service-Version: 1.19
tl;dr: A coroutine lambda does not hold onto captured variables.
This causes an AV crash when closing tabs. I randomly noticed this
in a Debug build as the memory contents got replaced with 0xCD.
In a Release build this bug is probably fairly subtle and not common.
(cherry picked from commit 91fd7d0101)
Service-Card-Id: 91258717
Service-Version: 1.19
This enables AtlasEngine by default in the 1.19 release branch.
A future change will remove the alternative DxEngine entirely.
(cherry picked from commit 204ebf3b19)
Service-Card-Id: 91158876
Service-Version: 1.19
The final parameter, `updateBottom`, controls not just whether the
`_virtualBottom` is updated, but also whether the position is clamped
to be within the existing `_virtualBottom`. Setting this to `false`
thus broke scroll-forward as the `_virtualBottom` was now a constant.
## Validation Steps Performed
* Disable scroll-foward
* Press and hold Ctrl+C
* It scrolls past the viewport bottom ✅
This changeset avoids re-encoding output from `AdaptDispatch`
via the win32-input-mode mechanism when VT input is enabled.
That is, an `AdaptDispatch` output like `\x1b[C` would otherwise
result in dozens of characters of input.
Related to #16343
## Validation Steps Performed
* Replace conhost with this
* Launch a Win32 application inside WSL
* ASCII keyboard inputs are represented as single `INPUT_RECORD`s ✅
tl;dr: A coroutine lambda does not hold onto captured variables.
This causes an AV crash when closing tabs. I randomly noticed this
in a Debug build as the memory contents got replaced with 0xCD.
In a Release build this bug is probably fairly subtle and not common.
During `!measureOnly` the old code would increment `distance` twice.
Now it doesn't. :)
Closes#16356
## Validation Steps Performed
See updated test instructions in `doc/COOKED_READ_DATA.md`
(cherry picked from commit 654b755161)
Service-Card-Id: 91232745
Service-Version: 1.19
Since all VT parameters are treated to be at least 1 (and 1 if they're
absent or 0), `modifierParam > 0` was always true. This meant that
`ENHANCED_KEY` was always being set. It's unclear why `ENHANCED_KEY`
was used there, but it's likely not needed in general.
Closes#16266
## Validation Steps Performed
* Can't test this unless we fix the win32 input mode issue #16343❌
(cherry picked from commit be9fc200c7)
Service-Card-Id: 91159301
Service-Version: 1.19
## Summary of the Pull Request
Cloud shell connection calls out to Azure to do a device code login.
When the polling interval is exceeded or the tab is closed, the method
doing the connection polling returns `nullptr`, and `AzureConnection`
immediately tries to `GetNamedString` from it, causing a crash. This
doesn't repro on Terminal Stable or Preview, suggesting it's pretty
recent related to the update of this azureconnection.
This is just a proposed fix, not sure if you want to do more extensive
changes to the affected class or not, so marking this as a draft.
## References and Relevant Issues
* N/A - encountered this while using the terminal myself
## PR Checklist/Validation
Tested out a local dev build:
- [x] Terminal doesn't crash when cloudshell polling interval exceeded
- [x] Terminal doesn't crash when cloudshell tab closed while polling
for Azure login
(cherry picked from commit 0c4751ba30)
Service-Card-Id: 91232784
Service-Version: 1.19
81b7e54 caused a regression in `SetConsoleWindowInfo` and any other
function that used the `WriteToScreen` helper. This is because it
assumes that it can place the viewport anywhere randomly and it was
written at a time where `TriggerScroll` didn't exist yet (there was
no need for that (also not today, but that's being worked on)).
Caching the viewport meant that `WriteToScreen`'s call to
`TriggerRedraw` would pick up the viewport from the last rendered
frame, which would cause the intersection of both to be potentially
empty and nothing to be drawn on the screen.
This commit reverts 81b7e54 as I found that it has no or negligible
impact on performance at this point, likely due to the overall
vastly better performance of conhost nowadays.
Closes#15932
## Validation Steps Performed
* Scroll the viewport by entire pages worth of content using
`SetConsoleWindowInfo` - see #15932
* The screen and scrollbars update immediately ✅
(cherry picked from commit 7a1b6f9d2a)
Service-Card-Id: 91152167
Service-Version: 1.19
Converts null byte to specific input event, so that it's properly
delivered to the program running in the terminal.
Closes#15939
(cherry picked from commit 8747a39a07)
Service-Card-Id: 91201444
Service-Version: 1.19
This fixes an issue where character-wise reading of an input like "abc"
would return "a" to the caller, store "b" as a partial translation
(= wrong) and return "c" for the caller to store it for the next call.
Closes#16223Closes#16299
## Validation Steps Performed
* `ReadFile` with a buffer size of 1 returns inputs character by
character without dropping any inputs ✅
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
(cherry picked from commit 63b3820a18)
Service-Card-Id: 91122022
Service-Version: 1.19
Under normal circumstances this bug should be rare as far as I can
observe it on my system. However, it does occur randomly.
In short, WSL doesn't pass us anonymous pipes, but rather WSA sockets
and those signal their graceful shutdown first before being closed
later by returning a `lpNumberOfBytesRead` of 0 in the meantime.
Additionally, `VtIo` synchronously pumps the input pipe to get the
initial cursor position, but fails to check `_exitRequested`.
And so even with the pipe handling fixed, `VtIo` will also deadlock,
because it will never realize that `VtInputThread` is done reading.
## Validation Steps Performed
* Build commit 376737e with this change and replace conhost with it
Coincidentally it contains a bug (of as of yet unknown origin)
due to which the initial cursor position loop in `VtIo` never
completes. Thanks to this, we can easily provoke this issue.
* Launch WSL in conhost and run an .exe inside it
* Close the conhost window
* Task manager shows that all conhost instances exit immediately
(cherry picked from commit adb04729bc)
Service-Card-Id: 91152102
Service-Version: 1.19
The nearby font loading has to be outside of the try/catch of the
`_FindFontFace` call, because it'll throw for broken font files.
But in my previous PR I had overlooked that the font variant loop
modifies the only copy of the face name that we got and was in the
same try/catch. That's bad, because once we get to the nearby search
code, the face name will be invalid. This commit fixes the issue by
wrapping each individual `_FindFontFace` call in a try/catch block.
Closes#16322
## Validation Steps Performed
* Remove every single copy of Windows Terminal from your system
* Manually clean up Cascadia .ttf files because they aren't gone
* Destroy your registry by manually removing appx references (fun!)
* Put the 4 Cascadia .ttf files into the Dev app AppX directory
* Launch
* No warning ✅
(cherry picked from commit b780b44528)
Service-Card-Id: 91114951
Service-Version: 1.19
I find it somewhat silly that (1) this isn't documented anywhere and (2)
installing the "desktop experience" packages for Server doesn't
automatically add support for the `Windows.Desktop` platform...
Oh well.
I'm going to roll this one out via Preview first, because if the store
blows up on it I would rather it not be during Stable roll-out.
(cherry picked from commit 86fb9b4478)
Service-Card-Id: 91098597
Service-Version: 1.19
During `!measureOnly` the old code would increment `distance` twice.
Now it doesn't. :)
Closes#16356
## Validation Steps Performed
See updated test instructions in `doc/COOKED_READ_DATA.md`
Since all VT parameters are treated to be at least 1 (and 1 if they're
absent or 0), `modifierParam > 0` was always true. This meant that
`ENHANCED_KEY` was always being set. It's unclear why `ENHANCED_KEY`
was used there, but it's likely not needed in general.
Closes#16266
## Validation Steps Performed
* Can't test this unless we fix the win32 input mode issue #16343❌
I randomly came across this class, that I didn't even remember we had.
We don't use this class at the moment and won't need it any time soon.
Its current implementation is also fairly questionable. While
`til::u16state` isn't "perfect", it's vastly better than this.
## Summary of the Pull Request
Cloud shell connection calls out to Azure to do a device code login.
When the polling interval is exceeded or the tab is closed, the method
doing the connection polling returns `nullptr`, and `AzureConnection`
immediately tries to `GetNamedString` from it, causing a crash. This
doesn't repro on Terminal Stable or Preview, suggesting it's pretty
recent related to the update of this azureconnection.
This is just a proposed fix, not sure if you want to do more extensive
changes to the affected class or not, so marking this as a draft.
## References and Relevant Issues
* N/A - encountered this while using the terminal myself
## PR Checklist/Validation
Tested out a local dev build:
- [x] Terminal doesn't crash when cloudshell polling interval exceeded
- [x] Terminal doesn't crash when cloudshell tab closed while polling
for Azure login
81b7e54 caused a regression in `SetConsoleWindowInfo` and any other
function that used the `WriteToScreen` helper. This is because it
assumes that it can place the viewport anywhere randomly and it was
written at a time where `TriggerScroll` didn't exist yet (there was
no need for that (also not today, but that's being worked on)).
Caching the viewport meant that `WriteToScreen`'s call to
`TriggerRedraw` would pick up the viewport from the last rendered
frame, which would cause the intersection of both to be potentially
empty and nothing to be drawn on the screen.
This commit reverts 81b7e54 as I found that it has no or negligible
impact on performance at this point, likely due to the overall
vastly better performance of conhost nowadays.
Closes#15932
## Validation Steps Performed
* Scroll the viewport by entire pages worth of content using
`SetConsoleWindowInfo` - see #15932
* The screen and scrollbars update immediately ✅
After exiting the main loop in this function the invariant
`nFont <= NumberOfFonts` still holds true. Additionally,
preceding this removed code is this (paraphrased):
```cpp
if (nFont < NumberOfFonts) {
RtlMoveMemory(...);
}
```
It ensures that the given slot `nFont` is always unoccupied by moving
it and all following items upwards if needed. As such, the call to
`DeleteObject` is always incorrect, as the slot is always "empty",
but may contain a copy of the previous occupant due to the `memmove`.
This regressed in 154ac2b.
Closes#16297
## Validation Steps Performed
* All fonts have a unique look in the preview panel ✅
This PR fixes Issue #11875 by introducing a ScrollViewer and some logic
for the scrollbar.
The ScrollViewer prevents the scrollbar from scrolling to the top
whenever "Save" is clicked in the Settings. In addition, the scrollbar
is scrolled to the top of the page whenever navigating to another page
within Settings. The scrollbar will not reset if attempting to navigate
to the same page that is already navigated to.
## Validation Steps Performed
Manual testing of the Settings by building the Terminal app.
Closes#11875
This fixes an issue where character-wise reading of an input like "abc"
would return "a" to the caller, store "b" as a partial translation
(= wrong) and return "c" for the caller to store it for the next call.
Closes#16223Closes#16299
## Validation Steps Performed
* `ReadFile` with a buffer size of 1 returns inputs character by
character without dropping any inputs ✅
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Adds "Campbell Absolute" which has absolute black/white instead of
slightly greyish variants as discussed per #35. Also updates line
endings to adhere to the default Windows line endings (i.e. CRLF)
Closes#35
This changeset fixes an issue caused by #15991 where "chunked" escape
sequences would get corrupted. The fix is to simply not flush eagerly
anymore. I tried my best to keep the input lag reduction from #15991,
but unfortunately this isn't possible for console APIs.
Closes#16079
## Validation Steps Performed
* `type ascii.com` produces soft font ASCII characters ✅
Under normal circumstances this bug should be rare as far as I can
observe it on my system. However, it does occur randomly.
In short, WSL doesn't pass us anonymous pipes, but rather WSA sockets
and those signal their graceful shutdown first before being closed
later by returning a `lpNumberOfBytesRead` of 0 in the meantime.
Additionally, `VtIo` synchronously pumps the input pipe to get the
initial cursor position, but fails to check `_exitRequested`.
And so even with the pipe handling fixed, `VtIo` will also deadlock,
because it will never realize that `VtInputThread` is done reading.
## Validation Steps Performed
* Build commit 376737e with this change and replace conhost with it
Coincidentally it contains a bug (of as of yet unknown origin)
due to which the initial cursor position loop in `VtIo` never
completes. Thanks to this, we can easily provoke this issue.
* Launch WSL in conhost and run an .exe inside it
* Close the conhost window
* Task manager shows that all conhost instances exit immediately
Just like in https://github.com/microsoft/WSL/pull/10745
We're working with the WSL team to figure out if we can use a LLM to
help us triage. This _should_ just comment on issues, if it finds
something similar on the backlog.
Our CI seems to have had an update recently to around VS 17.7.
That version contains a faulty implementation for C26478 and C26494.
The issue has been fixed in VS 17.8 and later.
The nearby font loading has to be outside of the try/catch of the
`_FindFontFace` call, because it'll throw for broken font files.
But in my previous PR I had overlooked that the font variant loop
modifies the only copy of the face name that we got and was in the
same try/catch. That's bad, because once we get to the nearby search
code, the face name will be invalid. This commit fixes the issue by
wrapping each individual `_FindFontFace` call in a try/catch block.
Closes#16322
## Validation Steps Performed
* Remove every single copy of Windows Terminal from your system
* Manually clean up Cascadia .ttf files because they aren't gone
* Destroy your registry by manually removing appx references (fun!)
* Put the 4 Cascadia .ttf files into the Dev app AppX directory
* Launch
* No warning ✅
I find it somewhat silly that (1) this isn't documented anywhere and (2)
installing the "desktop experience" packages for Server doesn't
automatically add support for the `Windows.Desktop` platform...
Oh well.
I'm going to roll this one out via Preview first, because if the store
blows up on it I would rather it not be during Stable roll-out.
I've also removed all of the supporting code.
Related work items: MSFT-47555635
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 f8ad0110fd81d1b848224158c8f95724f34b1db2
Notes in #16217 have the investigation.
TL;DR: we'd always buffer text. Even if we're disabled (unfocused). When
we're
disabled, we'd _never_ clear the buffered text. Oops.
Closes#16217
(cherry picked from commit d14524cd4c)
Service-Card-Id: 91033138
Service-Version: 1.19
The Azure cloud shell team made some API changes that required us to
format our requests a little differently. This PR makes those changes
(more info in the comments in the code)
Closes#16098
(cherry picked from commit 5a9f3529d7)
Service-Card-Id: 90985893
Service-Version: 1.19
It makes the output less cluttered and more correct (for example:
ServicingPipeline no longer tries to service two copies of each commit
if there's a merge in the history...)
(cherry picked from commit 18b0ecbb2a)
Service-Card-Id: 91042450
Service-Version: 1.19
This fixes a number of bugs introduced in 4370da9, all of which are of
the same kind: Holding the terminal lock across `WriteFile` calls into
the ConPTY pipe. This is problematic, because the pipe has a tiny buffer
size of just 4KiB and ConPTY may respond on its output pipe, before the
entire buffer given to `WriteFile` has been emptied. When the ConPTY
output thread then tries to acquire the terminal lock to begin parsing
the VT output, we get ourselves a proper deadlock (cross process too!).
The solution is to tease `Terminal` further apart into code that is
thread-safe and code that isn't. Functions like `SendKeyEvent` so far
have mixed them into one, because when they get called by `ControlCore`
they both, processed the data (not thread-safe as it accesses VT state)
and also sent that data back into `ControlCore` through a callback
which then indirectly called into the `ConptyConnection` which calls
`WriteFile`. Instead, we now return the data that needs to be sent from
these functions, and `ControlCore` is free to release the lock and
then call into the connection, which may then block indefinitely.
## Validation Steps Performed
* Start nvim in WSL
* Press `i` to enter the regular Insert mode
* Paste 1MB of text
* Doesn't deadlock ✅
(cherry picked from commit 71a1a97a9a)
Service-Card-Id: 91043521
Service-Version: 1.19
Adds
```xml
<uap17:UpdateWhileInUse>defer</uap17:UpdateWhileInUse>
```
to our `Package.Properties` for all our packages.
This was added in the September 2023 OS release of Windows 11.
Apparently, this just works now? I did update VS,
but I don't _think_ that updated the SDK.
I have no idea how it updated the manifest definitions.
Closes#3915Closes#6726
(cherry picked from commit 077d63e6a3)
Service-Card-Id: 91033136
Service-Version: 1.19
Notes in #16217 have the investigation.
TL;DR: we'd always buffer text. Even if we're disabled (unfocused). When
we're
disabled, we'd _never_ clear the buffered text. Oops.
Closes#16217
Add support for underline style and color in the renderer
> [!IMPORTANT]
> The PR adds underline style and color feature to AtlasEngine (WT) and
GDIRenderer (Conhost) only.
After the underline style and color feature addition to Conpty, this PR
takes it further and add support for rendering them to the screen!
Out of five underline styles, we already supported rendering for 3 of
those types (Singly, Doubly, Dotted) in some form in our (Atlas)
renderer. The PR adds the remaining types, namely, Dashed and Curly
underlines support to the renderer.
- All renderer engines now receive both gridline and underline color,
and the latter is used for drawing the underlines. **When no underline
color is set, we use the foreground color.**
- Curly underline is rendered using `sin()` within the pixel shader.
- To draw underlines for DECDWL and DECDHL, we send the line rendition
scale within `QuadInstance`'s texcoord attribute.
- In GDI renderer, dashed and dotted underline is drawn using `HPEN`
with a desired style. Curly line is a cubic Bezier that draws one wave
per cell.
## PR Checklist
- ✅ Set the underline color to underlines only, without affecting the
gridline color.
- ❌ Port to DX renderer. (Not planned as DX renderer soon to be replaced
by **AtlasEngine**)
- ✅ Port underline coloring and style to GDI renderer (Conhost).
- ✅ Wide/Tall `CurlyUnderline` variant for `DECDWL`/`DECDHL`.
Closes#7228
This changes the appearance of the disclaimer text that is used on some
of the settings pages. The italic text style is replaced with a neutral
style that fits better with the rest of the UI.
## Detailed Description of the Pull Request / Additional comments
I also tried out these alternative styles but overall preferred the
default TextBlock style (BodyTextBlockStyle).
Closes#16264.
The Azure cloud shell team made some API changes that required us to
format our requests a little differently. This PR makes those changes
(more info in the comments in the code)
Closes#16098
It makes the output less cluttered and more correct (for example:
ServicingPipeline no longer tries to service two copies of each commit
if there's a merge in the history...)
This fixes a number of bugs introduced in 4370da9, all of which are of
the same kind: Holding the terminal lock across `WriteFile` calls into
the ConPTY pipe. This is problematic, because the pipe has a tiny buffer
size of just 4KiB and ConPTY may respond on its output pipe, before the
entire buffer given to `WriteFile` has been emptied. When the ConPTY
output thread then tries to acquire the terminal lock to begin parsing
the VT output, we get ourselves a proper deadlock (cross process too!).
The solution is to tease `Terminal` further apart into code that is
thread-safe and code that isn't. Functions like `SendKeyEvent` so far
have mixed them into one, because when they get called by `ControlCore`
they both, processed the data (not thread-safe as it accesses VT state)
and also sent that data back into `ControlCore` through a callback
which then indirectly called into the `ConptyConnection` which calls
`WriteFile`. Instead, we now return the data that needs to be sent from
these functions, and `ControlCore` is free to release the lock and
then call into the connection, which may then block indefinitely.
## Validation Steps Performed
* Start nvim in WSL
* Press `i` to enter the regular Insert mode
* Paste 1MB of text
* Doesn't deadlock ✅
Adds
```xml
<uap17:UpdateWhileInUse>defer</uap17:UpdateWhileInUse>
```
to our `Package.Properties` for all our packages.
This was added in the September 2023 OS release of Windows 11.
Apparently, this just works now? I did update VS,
but I don't _think_ that updated the SDK.
I have no idea how it updated the manifest definitions.
Closes#3915Closes#6726
- AtlasEngine: Minor bug fixes (GH-16219)
- Fix the fix for the fix of nearby font loading (GH-16196)
- Added selectionBackground to light color schemes (GH-16243)
- Another theoretical fix for a crash (GH-16267)
- Fix tabs being printed in cmd.exe prompts (GH-16273)
Related work items: MSFT-47266988
A late change in #16105 wrapped `_buffer` into a class to better track
its dirty state, but I failed to notice that in this one instance we
intentionally manipulated `_buffer` without marking it as dirty.
This fixes the issue by adding a call to `MarkAsClean()`.
This changeset also adds the test instructions from #15783 as a
document to this repository. I've extended the list with two
bugs we've found in the implementation since then.
## Validation Steps Performed
* In cmd.exe, with an empty prompt in an empty directory:
Pressing tab produces an audible bing and prints no text ✅
(cherry picked from commit 7a8dd90294)
Service-Card-Id: 91033502
Service-Version: 1.19
For history:
> This is MSFT:46763065 internally. Dumps show this repros on 1.19 too.
>
> This was previously #16061 which had a theoretical fix in #16065.
Looks like you're on Terminal Stable v1.18.2822.0, and
https://github.com/microsoft/terminal/releases/tag/v1.18.2822.0 is
supposed to have had that fix in it. Dang.
> well this is embarrassing ... I never actually checked if we _still
had a `_window`_. We're alive, yay! But we're still in the middle of
refrigerating. So, there's no HWND anymore
Attempt to fix this by actually ensuring there's a `_window` in
`AppHost::_WindowInitializedHandler`
Closes#16235
(cherry picked from commit 59dcbbe0e9)
Service-Card-Id: 91041359
Service-Version: 1.19
Add a selectionBackground property which is set to the scheme's
brightBlack too all 3 of the light color schemes.
Related to #8716
It does not close the bug because as mentioned in the issue, when you
input numbers, they seem to be invisible in the light color schemes and
selecting them with the cursor doesn't reveal them.
(cherry picked from commit a5c269b280)
Service-Card-Id: 91033167
Service-Version: 1.19
I still don't know how to reproduce it properly, but I'm slowly
wrapping my head around how and why it happens. The issue isn't that
`FindFamilyName` fails with `exists=FALSE`, but rather that any of the
followup calls like `GetDesignGlyphMetrics` fails, which results in an
exception and subsequently in an orderly fallback to Consolas.
I've always thought that the issue is that even with the nearby font
collection we get an `exists=FALSE`... I'm not sure why I thought that.
This changeset also drops the fallback iteration for Lucida Console and
Courier New, because I felt like the code looks neater that way and I
think it's a reasonable expectation that Consolas is always installed.
Closes#16058
(cherry picked from commit 9e86c9811f)
Service-Card-Id: 90885607
Service-Version: 1.19
This commit fixes 4 minor bugs:
* Forgot to set the maximum swap chain latency. Without it, it defaults
to up to 3 frames of latency. We don't need this, because our renderer
is simple and fast and is expected to draw frames within <1ms.
* ClearType treats the alpha channel as ignored, whereas custom shaders
can manipulate the alpha channel freely. This meant that using both
simultaneously would produce weird effects, like text having black
background. We now force grayscale AA instead.
* The builtin retro shader should not be effected by the previous point.
* When the cbuffer is entirely unused in a custom shader, it has so far
resulted in constant redraws. This happened because the D3D reflection
`GetDesc` call will then return `E_FAIL` in this situation.
The new code on the other hand will now assume that a failure
to get the description is equal to the variable being unused.
Closes#15960
## Validation Steps Performed
* A custom passthrough shader works with grayscale and ClearType AA
while also changing the opacity with Ctrl+Shift+Scroll ✅
* Same for the builtin retro shader, but ClearType works ✅
* The passthrough shader doesn't result in constant redrawing ✅
(cherry picked from commit 0289cb043c)
Service-Card-Id: 90915277
Service-Version: 1.19
A late change in #16105 wrapped `_buffer` into a class to better track
its dirty state, but I failed to notice that in this one instance we
intentionally manipulated `_buffer` without marking it as dirty.
This fixes the issue by adding a call to `MarkAsClean()`.
This changeset also adds the test instructions from #15783 as a
document to this repository. I've extended the list with two
bugs we've found in the implementation since then.
## Validation Steps Performed
* In cmd.exe, with an empty prompt in an empty directory:
Pressing tab produces an audible bing and prints no text ✅
For history:
> This is MSFT:46763065 internally. Dumps show this repros on 1.19 too.
>
> This was previously #16061 which had a theoretical fix in #16065.
Looks like you're on Terminal Stable v1.18.2822.0, and
https://github.com/microsoft/terminal/releases/tag/v1.18.2822.0 is
supposed to have had that fix in it. Dang.
> well this is embarrassing ... I never actually checked if we _still
had a `_window`_. We're alive, yay! But we're still in the middle of
refrigerating. So, there's no HWND anymore
Attempt to fix this by actually ensuring there's a `_window` in
`AppHost::_WindowInitializedHandler`
Closes#16235
Add a selectionBackground property which is set to the scheme's
brightBlack too all 3 of the light color schemes.
Related to #8716
It does not close the bug because as mentioned in the issue, when you
input numbers, they seem to be invisible in the light color schemes and
selecting them with the cursor doesn't reveal them.
The `Telemetry` class was implemented as a singleton which stood in
my long-term goal to remove all global variables from the project.
Most telemetry captured by it hasn't been looked at for a long time
and just as much is now pointless (e.g.,`_fCtrlPgUpPgDnUsed`).
This removes the code.
## Validation Steps Performed
* Still compiles ✅
I still don't know how to reproduce it properly, but I'm slowly
wrapping my head around how and why it happens. The issue isn't that
`FindFamilyName` fails with `exists=FALSE`, but rather that any of the
followup calls like `GetDesignGlyphMetrics` fails, which results in an
exception and subsequently in an orderly fallback to Consolas.
I've always thought that the issue is that even with the nearby font
collection we get an `exists=FALSE`... I'm not sure why I thought that.
This changeset also drops the fallback iteration for Lucida Console and
Courier New, because I felt like the code looks neater that way and I
think it's a reasonable expectation that Consolas is always installed.
Closes#16058
This commit fixes 4 minor bugs:
* Forgot to set the maximum swap chain latency. Without it, it defaults
to up to 3 frames of latency. We don't need this, because our renderer
is simple and fast and is expected to draw frames within <1ms.
* ClearType treats the alpha channel as ignored, whereas custom shaders
can manipulate the alpha channel freely. This meant that using both
simultaneously would produce weird effects, like text having black
background. We now force grayscale AA instead.
* The builtin retro shader should not be effected by the previous point.
* When the cbuffer is entirely unused in a custom shader, it has so far
resulted in constant redraws. This happened because the D3D reflection
`GetDesc` call will then return `E_FAIL` in this situation.
The new code on the other hand will now assume that a failure
to get the description is equal to the variable being unused.
Closes#15960
## Validation Steps Performed
* A custom passthrough shader works with grayscale and ClearType AA
while also changing the opacity with Ctrl+Shift+Scroll ✅
* Same for the builtin retro shader, but ClearType works ✅
* The passthrough shader doesn't result in constant redrawing ✅
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 3fc4bb99c75451d0ecadd7e4c8fe06ad67217574
Related work items: MSFT-47266988
As in the title. Also fixes a crash for refrigeration with the rainbow
border.
Closes#16211
Tested by manually forcing us into Windows 10 mode (to refrigerate the
window). That immediately repros the bug, which was simple enough to
fix.
(cherry picked from commit d8c7719bfb)
Service-Card-Id: 90928408
Service-Version: 1.19
The initial cooked read (= conhost readline) rewrite had two flaws:
* Using viewport scrolls under ConPTY to avoid emitting newlines
resulted in various bugs around marks, coloring, etc. It's still
somewhat unclear why this happened, but the next issue is related and
much worse.
* Rewriting the input line every time causes problems with accessibility
tools, as they'll re-announce unchanged parts again and again.
The solution to these is to simply stop writing the unchanged parts of
the prompt. To do this, code was added to measure the size of text
without actually inserting them into the buffer. Since this meant that
the "interactive" mode of `WriteCharsLegacy` would need to be duplicated
for the new code, I instead moved those parts into `COOKED_READ_DATA`.
That way we can now have the interactive transform of the prompt (=
Ctrl+C -> ^C) and the two text functions (measure text & actually write
text) are now agnostic to this transformation.
Closes#16034Closes#16044
## Validation Steps Performed
* A vision impaired user checked it out and it seemed fine ✅
(cherry picked from commit e1c69a99ce)
Service-Card-Id: 90891693
Service-Version: 1.19
cd6b083 had 2 issues:
* Improper testing with Ctrl+M instead of Edit > Mark.
* Wrong SelectionState function being used. When the selection is
initiated without keyboard or mouse, `IsKeyboardMarkSelection`
returns false. The proper function to use is `IsLineSelection`.
Closes#15153
## Validation Steps Performed
* Run Far
* Start selection via Edit>Mark
* Hold Alt while dragging to make a rectangular selection
* Right click
* Clipboard contains a rectangular copy ✅
(cherry picked from commit d496a5fb80)
Service-Card-Id: 90886368
Service-Version: 1.19
This restores the original code from before 821ae3a where
the `.GetMainBuffer()` call was accidentally removed.
Closes#16158
## Validation Steps Performed
* Run this Python script:
```py
import sys
while True:
sys.stdout.write("\033[?1049h")
sys.stdout.flush()
sys.stdin.readline()
sys.stdout.write("\033[?1049l")
```
* Press enter repeatedly
* Doesn't crash ✅
(cherry picked from commit 08f30330d1)
Service-Card-Id: 90861143
Service-Version: 1.19
eb871bf fails to properly handle REG_SZ strings, which are documented as
being null-terminated _and_ length restricted.
`wcsnlen` is the perfect fit for handling this situation as it returns
the position of the first \0, or the given length parameter.
As a drive by improvement, this also drops some redundant code:
* `to_environment_strings_w` which is the same as `to_string`
* Retrieving `USERNAME`/`USERDOMAIN` via `LookupAccountSidW` and
`COMPUTERNAME` via `GetComputerNameW` is not necessary as the
variables are "volatile" and I believe there's generally no
expectation that they change unless you log in again.
Closes#16051
## Validation Steps Performed
* Run this in PowerShell to insert a env value with \0:
```pwsh
$hklm = [Microsoft.Win32.RegistryKey]::OpenBaseKey(
[Microsoft.Win32.RegistryHive]::LocalMachine,
0
)
$key = $hklm.OpenSubKey(
'SYSTEM\CurrentControlSet\Control\Session Manager\Environment',
$true
)
$key.SetValue('test', "foo`0bar")
```
* All `EnvTests` still pass ✅
* (Don't forget to remove the above value again!)
(cherry picked from commit 64b5b2884a)
Service-Card-Id: 90879164
Service-Version: 1.19
Guess what _doesn't_ have the same layout as a bitmap? A `til::color`.
Noticed in 1.19.
Regressed in #16006
(cherry picked from commit 1745857407)
Service-Card-Id: 90758500
Service-Version: 1.19
This fixes a cosmetic issue with the version number in the unpackaged
builds and NuGet packages.
They were showing up as `-preview`, even when they were stable, because
the variable template didn't know about the branding.
(cherry picked from commit 544cdd78af)
Service-Card-Id: 90786432
Service-Version: 1.19
Wrap single quotes to drag and dropped paths in WSL
## References and Relevant Issues
#15646 , #8109
## Detailed Description of the Pull Request / Additional comments
First time contributor, from what I understand from reading #15646 and #8109 , issue is asking for single quotes added to a drag and dropped path always, regardless of whitespace and special characters, in WSL.
## Validation Steps Performed
Tested drag and drop changes in WSL and non WSL sources.
Closes#15646
As in the title. Also fixes a crash for refrigeration with the rainbow
border.
Closes#16211
Tested by manually forcing us into Windows 10 mode (to refrigerate the
window). That immediately repros the bug, which was simple enough to
fix.
The initial cooked read (= conhost readline) rewrite had two flaws:
* Using viewport scrolls under ConPTY to avoid emitting newlines
resulted in various bugs around marks, coloring, etc. It's still
somewhat unclear why this happened, but the next issue is related and
much worse.
* Rewriting the input line every time causes problems with accessibility
tools, as they'll re-announce unchanged parts again and again.
The solution to these is to simply stop writing the unchanged parts of
the prompt. To do this, code was added to measure the size of text
without actually inserting them into the buffer. Since this meant that
the "interactive" mode of `WriteCharsLegacy` would need to be duplicated
for the new code, I instead moved those parts into `COOKED_READ_DATA`.
That way we can now have the interactive transform of the prompt (=
Ctrl+C -> ^C) and the two text functions (measure text & actually write
text) are now agnostic to this transformation.
Closes#16034Closes#16044
## Validation Steps Performed
* A vision impaired user checked it out and it seemed fine ✅
cd6b083 had 2 issues:
* Improper testing with Ctrl+M instead of Edit > Mark.
* Wrong SelectionState function being used. When the selection is
initiated without keyboard or mouse, `IsKeyboardMarkSelection`
returns false. The proper function to use is `IsLineSelection`.
Closes#15153
## Validation Steps Performed
* Run Far
* Start selection via Edit>Mark
* Hold Alt while dragging to make a rectangular selection
* Right click
* Clipboard contains a rectangular copy ✅
This restores the original code from before 821ae3a where
the `.GetMainBuffer()` call was accidentally removed.
Closes#16158
## Validation Steps Performed
* Run this Python script:
```py
import sys
while True:
sys.stdout.write("\033[?1049h")
sys.stdout.flush()
sys.stdin.readline()
sys.stdout.write("\033[?1049l")
```
* Press enter repeatedly
* Doesn't crash ✅
eb871bf fails to properly handle REG_SZ strings, which are documented as
being null-terminated _and_ length restricted.
`wcsnlen` is the perfect fit for handling this situation as it returns
the position of the first \0, or the given length parameter.
As a drive by improvement, this also drops some redundant code:
* `to_environment_strings_w` which is the same as `to_string`
* Retrieving `USERNAME`/`USERDOMAIN` via `LookupAccountSidW` and
`COMPUTERNAME` via `GetComputerNameW` is not necessary as the
variables are "volatile" and I believe there's generally no
expectation that they change unless you log in again.
Closes#16051
## Validation Steps Performed
* Run this in PowerShell to insert a env value with \0:
```pwsh
$hklm = [Microsoft.Win32.RegistryKey]::OpenBaseKey(
[Microsoft.Win32.RegistryHive]::LocalMachine,
0
)
$key = $hklm.OpenSubKey(
'SYSTEM\CurrentControlSet\Control\Session Manager\Environment',
$true
)
$key.SetValue('test', "foo`0bar")
```
* All `EnvTests` still pass ✅
* (Don't forget to remove the above value again!)
This addresses the following issues:
* The JSON Schema spec doesn't actually define whether objects with
a "properties" key still require `"type": "object"` or not.
VS Code for instance largely pretends as if it's implied, but when it
encounters them inside a `oneOf` tree, then it behaves as if it isn't.
In other words, we need to always set `"type": "object"`.
* Declaring an `oneOf` containing a `"type": "string"` and an `enum`
doesn't work, because if one of the `enum` cases is given, it results
in both variants to match, since any `enum` is also a `string`.
We have to use `anyOf` instead.
* `SuggestionSource` used `"BuiltinSuggestionSource"` inside a `type`
key which doesn't work. We have to use `$ref` for that.
Closes#13387
## Validation Steps Performed
* VS Code stops complaining ✅
* https://www.jsonschemavalidator.net/✅
## Summary of the Pull Request
Dependency support is now GA in WinGet. Updating the instructions in
README
## References and Relevant Issues
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
## PR Checklist
- [ ] Closes #xxx
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
This fixes a cosmetic issue with the version number in the unpackaged
builds and NuGet packages.
They were showing up as `-preview`, even when they were stable, because
the variable template didn't know about the branding.
If you're already in the "output" state, then an app requesting an
"output" mark probably shouldn't end the current mark and start a new
one. It should just keep on keepin' on.
The decision to end the previous one was arbitrary in the first place,
so let's arbitrarily change it back.
Especially noticable if you hit <kbd>Enter</kbd> during a command,
because the auto-mark prompt work will do a CommandEnd, so long-running
commands will get broken into multiple marks 🥲
This pull request also removes the original release and nightly
pipelines, but it does not remove the release pipeline _template_.
I had to demote the Azure job from being a _deployment_ to being a plain
old job, unfortunately. Alas! Review with whitespace disabled (or `git
diff -w`).
`GetAt` can throw if the index is out of range. We don't check that in
some places. This fixes some of those.
I don't think this will take care of #15689, but it might help?
(cherry picked from commit 5aadddaea9)
Service-Card-Id: 90731981
Service-Version: 1.19
`GetAt` can throw if the index is out of range. We don't check that in
some places. This fixes some of those.
I don't think this will take care of #15689, but it might help?
## Summary of the Pull Request
> ## Abstract
>
> Multiple related scenarios have come up where it would be beneficial
to display
> actionable UI to the user within the context of the active terminal
itself. This
> UI would be akin to the Intellisense UI in Visual Studio. It appears
right where
> the user is typing, and can help provide immediate content for the
user, based
> on some context. The "Suggestions UI" is this new ephemeral UI within
the
> Windows Terminal that can display different types of actions, from
different
> sources.
>
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec
<sub>\*</sub><sup>\*</sup>\*_
Similar to #14792, a lot of this code is written. This stuff isn't
checked in though, so I'm presenting formally before I start yeeting PRs
out there.
## PR Checklist
- [x] This is a spec for #1595. It also references:
* #3121
* #10436
* #12927
* #12863
Well, Pane doesn't _only_ care if the connection isn't entering a
terminal state. It does need to update its own state first.
Regressed in #15335Closes#16068
(cherry picked from commit 4145f18768)
Service-Card-Id: 90731934
Service-Version: 1.19
Updated the function `TerminalPage::CloseWindow` to include logic for
closing context and flyout menus so that they are dismissed before the
warning is displayed.
Closes#16039
(cherry picked from commit aafb91745e)
Service-Card-Id: 90731989
Service-Version: 1.19
Fixes MSFT:46725264
don't explode trying to parse a URL, if the string wasn't one.
(cherry picked from commit 59aaba7c5b)
Service-Card-Id: 90687770
Service-Version: 1.19
See MSFT:46763065. Looks like we're in the middle of being
`Refrigerate`d, we're pumping messages, and as we pump messages, we get
to a `co_await` in `AppHost::_WindowInitializedHandler`. When we resume,
we just try to use `this` like everything's fine but OH NO, IT'S NOT.
To fix this, I'm
* Adding `enable_shared_from_this` to `AppHost`
* Holding the `AppHost` in a shared_ptr in WindowThread
- though, this is a singular owning `shared_ptr`. This is probably ripe
for other footguns, but there's little we can do about this.
* whenever we `co_await` in `AppHost`, make sure we grab a weak ref
first, and check it on the other side.
This is another "squint and yep that's a bug" fix, that I haven't been
able to verify locally. This is
[allegedly](https://media.tenor.com/VQi3bktwLdIAAAAC/allegedly-supposedly.gif)
about 10% of our 1.19 crashes after 3 days.
Closes#16061
(cherry picked from commit 8521aae889)
Service-Card-Id: 90731962
Service-Version: 1.19
Wow our preview population must just not use `startupActions`. This
obviously never worked in 1.18 Preview.
Closes#16050
(cherry picked from commit f6425dbd59)
Service-Card-Id: 90715243
Service-Version: 1.19
Well, Pane doesn't _only_ care if the connection isn't entering a
terminal state. It does need to update its own state first.
Regressed in #15335Closes#16068
Updated the function `TerminalPage::CloseWindow` to include logic for
closing context and flyout menus so that they are dismissed before the
warning is displayed.
Closes#16039
See MSFT:46763065. Looks like we're in the middle of being
`Refrigerate`d, we're pumping messages, and as we pump messages, we get
to a `co_await` in `AppHost::_WindowInitializedHandler`. When we resume,
we just try to use `this` like everything's fine but OH NO, IT'S NOT.
To fix this, I'm
* Adding `enable_shared_from_this` to `AppHost`
* Holding the `AppHost` in a shared_ptr in WindowThread
- though, this is a singular owning `shared_ptr`. This is probably ripe
for other footguns, but there's little we can do about this.
* whenever we `co_await` in `AppHost`, make sure we grab a weak ref
first, and check it on the other side.
This is another "squint and yep that's a bug" fix, that I haven't been
able to verify locally. This is
[allegedly](https://media.tenor.com/VQi3bktwLdIAAAAC/allegedly-supposedly.gif)
about 10% of our 1.19 crashes after 3 days.
Closes#16061
This pipeline does everything the existing release pipeline does, except
it does it using the OneBranch official templates.
Most of our existing build infrastructure has been reused, with the
following changes:
- We are no longer using `job-submit-windows-vpack`, as OneBranch does
this for us.
- `job-merge-msix-into-bundle` now supports afterBuildSteps, which we
use to stage the msixbundle into the right place for the vpack
- `job-build-project` supports deleting all non-signed files (which the
OneBranch post-build validation requires)
- `job-build-project` now deletes `console.dll`, which is unused in any
of our builds, because XFGCheck blows up on it for some reason on x86
- `job-publish-symbols` now supports two different types of PAT
ingestion
- I have pulled out the NuGet filename variables into a shared variables
template
I have also introduced a TSA config (which files bugs on us for binary
analysis failures as well as using the word 'sucks' and stuff.)
I have also baselined a number of control flow guard/binary analysis
failures.
(cherry picked from commit 6489f6b39d)
Service-Card-Id: 90706777
Service-Version: 1.19
This pipeline does everything the existing release pipeline does, except
it does it using the OneBranch official templates.
Most of our existing build infrastructure has been reused, with the
following changes:
- We are no longer using `job-submit-windows-vpack`, as OneBranch does
this for us.
- `job-merge-msix-into-bundle` now supports afterBuildSteps, which we
use to stage the msixbundle into the right place for the vpack
- `job-build-project` supports deleting all non-signed files (which the
OneBranch post-build validation requires)
- `job-build-project` now deletes `console.dll`, which is unused in any
of our builds, because XFGCheck blows up on it for some reason on x86
- `job-publish-symbols` now supports two different types of PAT
ingestion
- I have pulled out the NuGet filename variables into a shared variables
template
I have also introduced a TSA config (which files bugs on us for binary
analysis failures as well as using the word 'sucks' and stuff.)
I have also baselined a number of control flow guard/binary analysis
failures.
The version we were using requires .NET 2.1 (wow) which is way out of
support.
Task version 3 supports much newer versions.
(cherry picked from commit ac2b0e744c)
Service-Card-Id: 90688108
Service-Version: 1.19
Control Flow Guard requires both linker and compiler flags.
It turns out that the MSVC build rules determine whether to _link_ with
CFG based on whether it compiled anything with CFG.
It also turns out that when you don't compile anything (such as in our
DLL projects that only consume a static library!), the build rules can't
guess whether to link with CFG.
Whoops.
We need to force it.
(cherry picked from commit 1b143e34a8)
Service-Card-Id: 90688105
Service-Version: 1.19
Found this while looking through dumps for failure
`f544cf8e-1879-c59b-3f0b-1a364b92b974`. That's MSFT:45210947. (1% of our
1.19 crashes)
From the dump I looked at,
Looks like,
* we're on Windows 10
* We're refrigerating a window
* We are pumping the remaining XAML messages as we refrigerate
(`_pumpRemainingXamlMessages`)
* In there, we're finally getting the
`TerminalPage::_CompleteInitialization`
* that calls up to the `_root->Initialized` lambda set up in
`TerminalWindow::Initialize`
* There it tries to get the launch mode from the settings, and explodes.
Presumably _settings is null, but can't see in this dump.
so the window is closing before it's initialized.
When we `_warmWindow = std::move(_host->Refrigerate())`, we call
`AppHost::Refrigerate`, which will null out the TerminalWindow. So when
we're getting to `TerminalWindow::Initialize`, we're calling that on a
nullptr. That's the trick.
We need to revoke the internal Initialized callback. Which makes sense.
It's a lambda that binds _this_ 🤦
---
After more looking, it really doesn't _seem_ like the stacks that are
tracked in `f544cf8e-1879-c59b-3f0b-1a364b92b974` look like the same
stack that I was debugging, but this _is_ a realy issue regardless.
(cherry picked from commit 7073ec01bf)
Service-Card-Id: 90672654
Service-Version: 1.19
f1aa699 was fundamentally incorrect as it used `IdnToAscii` and
`IdnToUnicode` on the entire URL, even though these functions only work
on domain names. This commit fixes the issue by using the WinRT `Url`
class and its `AbsoluteUri` and `AbsoluteCanonicalUri` getters.
The algorithm still works the same way though.
Closes#16017
## Validation Steps Performed
* ``"`e]8;;https://www.xn--fcbook-3nf5b.com/`e\test`e]8;;`e\"``
still shows as two URLs in the popup ✅
* Shows the given URI if it's canonical and not an IDN ✅
* Works with >100 char long file:// URIs ✅
(cherry picked from commit 198c11f36d)
Service-Card-Id: 90642844
Service-Version: 1.19
One day into 1.19, and there's a LOT of hits here (**76.25%** of our
~300 crashes). A crash if the Theme doesn't have a `tab` member.
Regressed in #15948
Closes MSFT:46714723
(cherry picked from commit cf193858f6)
Service-Card-Id: 90670731
Service-Version: 1.19
Control Flow Guard requires both linker and compiler flags.
It turns out that the MSVC build rules determine whether to _link_ with
CFG based on whether it compiled anything with CFG.
It also turns out that when you don't compile anything (such as in our
DLL projects that only consume a static library!), the build rules can't
guess whether to link with CFG.
Whoops.
We need to force it.
Unfortunately, the appLicensing restricted capability we used to make
Canary installable without the store only works on Windows 11. Because
of that, we have to restrict the app package to Windows 11 and above.
I'd rather not leave Windows 10 users out in the cold, so this pull
request also publishes Canary builds to the public storage bucket with
the name `Microsoft.WindowsTerminalCanary_latest_x64.zip` (etc.)
The version number will be kept inside the archive. It remains to be
seen whether that is a good idea!
When combined with #16048, Canary builds from Azure will automatically
run in portable mode!
I also added support to the unpackaged distribution script to produce
portable mode packages. It is off by default for AppX->ZIP builds and
**on** by default for Layout->ZIP builds.
This constitutes a change in behavior.
Found this while looking through dumps for failure
`f544cf8e-1879-c59b-3f0b-1a364b92b974`. That's MSFT:45210947. (1% of our
1.19 crashes)
From the dump I looked at,
Looks like,
* we're on Windows 10
* We're refrigerating a window
* We are pumping the remaining XAML messages as we refrigerate
(`_pumpRemainingXamlMessages`)
* In there, we're finally getting the
`TerminalPage::_CompleteInitialization`
* that calls up to the `_root->Initialized` lambda set up in
`TerminalWindow::Initialize`
* There it tries to get the launch mode from the settings, and explodes.
Presumably _settings is null, but can't see in this dump.
so the window is closing before it's initialized.
When we `_warmWindow = std::move(_host->Refrigerate())`, we call
`AppHost::Refrigerate`, which will null out the TerminalWindow. So when
we're getting to `TerminalWindow::Initialize`, we're calling that on a
nullptr. That's the trick.
We need to revoke the internal Initialized callback. Which makes sense.
It's a lambda that binds _this_ 🤦
---
After more looking, it really doesn't _seem_ like the stacks that are
tracked in `f544cf8e-1879-c59b-3f0b-1a364b92b974` look like the same
stack that I was debugging, but this _is_ a realy issue regardless.
f1aa699 was fundamentally incorrect as it used `IdnToAscii` and
`IdnToUnicode` on the entire URL, even though these functions only work
on domain names. This commit fixes the issue by using the WinRT `Url`
class and its `AbsoluteUri` and `AbsoluteCanonicalUri` getters.
The algorithm still works the same way though.
Closes#16017
## Validation Steps Performed
* ``"`e]8;;https://www.xn--fcbook-3nf5b.com/`e\test`e]8;;`e\"``
still shows as two URLs in the popup ✅
* Shows the given URI if it's canonical and not an IDN ✅
* Works with >100 char long file:// URIs ✅
One day into 1.19, and there's a LOT of hits here (**76.25%** of our
~300 crashes). A crash if the Theme doesn't have a `tab` member.
Regressed in #15948
Closes MSFT:46714723
The `GenRTF(...)` was using `\highlight` control word for sending
background text color in the RTF format during a copy command. This
doesn't work correctly, since many applications (E.g. MSWord) don't
support full RGB with `\highlight`, and instead uses an approximation of
what is received. For example, `rgb(197, 15, 31)` becomes `rgb(255, 0,
255)`. Also, the standard way of using background colors is `\cbN`
control word, which isn't supported as per the [RTF Spec 1.9.1]
in Word.
But it briefly mentioned a workaround at Pg. 23, which seems to work on
all the RTF editors I tested.
The PR makes the changes to use `\chshdng0\chcbpatN` for the background
coloring.
Also did some refactoring to make the implementation concise.
## Validation Steps Performed
Verified that the background is correctly copied on below editors:
- MSWord
- WordPad
- LibreOffice
- Outlook
[RTF Spec 1.9.1]: https://msopenspecs.azureedge.net/files/Archive_References/[MSFT-RTF].pdf
Subjectively speaking, this commit makes 3 improvements:
* Most importantly, it now would work with arbitrary Unicode text.
(No more `IsGlyphFullWidth` or DBCS handling during reflow.)
* Due to the simpler implementation it hopefully makes review of
future changes and maintenance simpler. (~3x less LOC.)
* It improves perf. by 1-2 orders of magnitude.
(At 120x9001 with a full buffer I get 60ms -> 2ms.)
Unfortunately, I'm not confident that the new code replicates the old
code exactly, because I failed to understand it. During development
I simply tried to match its behavior with what I think reflow should do.
Closes#797Closes#3088Closes#4968Closes#6546Closes#6901Closes#15964
Closes MSFT:19446208
Related to #5800 and #8000
## Validation Steps Performed
* Unit tests ✅
* Feature tests ✅
* Reflow with a scrollback ✅
* Reflowing the cursor cell causes a forced line-wrap ✅
(Even at the end of the buffer. ✅)
* `color 8f` and reflowing retains the background color ✅
* Enter alt buffer, Resize window, Exit alt buffer ✅
(cherry picked from commit 74748394c1)
Service-Card-Id: 90642727
Service-Version: 1.19
A carriage return (enter key) will increase the _distanceEnd by up to
viewport-width many columns, since it increases the Y distance between
the start and end by 1 (it's a newline after all).
This will make _flushBuffer() think that the new _buffer is way longer
than the old one and so _erase() ends up not erasing the tail end of
the prompt, even if the new prompt is actually shorter.
This commit fixes the issue by separating the newline printing
out from the regular text printing loops.
## Validation Steps Performed
* Run cmd.exe
* Write "echo hello" and press Enter
* Write "foobar foo bar" (don't press Enter)
* Press F7, select "echo hello" and press Enter
* Previous prompt says "echo hello" ✅
(cherry picked from commit c7f30a86d7)
Service-Card-Id: 90642765
Service-Version: 1.19
With us adding a .appinstaller distribution of Canary, the Store
services update checker has beome insufficient to determine whether
there are package updates.
App Installer supports us checking for updates by using PackageManager
and the Package interfaces.
We'll use those instead of the Store services interface, and bail out
early if the App Installer gives us an answer.
(cherry picked from commit e0fc3bcd0a)
Service-Card-Id: 90644882
Service-Version: 1.19
Subjectively speaking, this commit makes 3 improvements:
* Most importantly, it now would work with arbitrary Unicode text.
(No more `IsGlyphFullWidth` or DBCS handling during reflow.)
* Due to the simpler implementation it hopefully makes review of
future changes and maintenance simpler. (~3x less LOC.)
* It improves perf. by 1-2 orders of magnitude.
(At 120x9001 with a full buffer I get 60ms -> 2ms.)
Unfortunately, I'm not confident that the new code replicates the old
code exactly, because I failed to understand it. During development
I simply tried to match its behavior with what I think reflow should do.
Closes#797Closes#3088Closes#4968Closes#6546Closes#6901Closes#15964
Closes MSFT:19446208
Related to #5800 and #8000
## Validation Steps Performed
* Unit tests ✅
* Feature tests ✅
* Reflow with a scrollback ✅
* Reflowing the cursor cell causes a forced line-wrap ✅
(Even at the end of the buffer. ✅)
* `color 8f` and reflowing retains the background color ✅
* Enter alt buffer, Resize window, Exit alt buffer ✅
A carriage return (enter key) will increase the _distanceEnd by up to
viewport-width many columns, since it increases the Y distance between
the start and end by 1 (it's a newline after all).
This will make _flushBuffer() think that the new _buffer is way longer
than the old one and so _erase() ends up not erasing the tail end of
the prompt, even if the new prompt is actually shorter.
This commit fixes the issue by separating the newline printing
out from the regular text printing loops.
## Validation Steps Performed
* Run cmd.exe
* Write "echo hello" and press Enter
* Write "foobar foo bar" (don't press Enter)
* Press F7, select "echo hello" and press Enter
* Previous prompt says "echo hello" ✅
With us adding a .appinstaller distribution of Canary, the Store
services update checker has beome insufficient to determine whether
there are package updates.
App Installer supports us checking for updates by using PackageManager
and the Package interfaces.
We'll use those instead of the Store services interface, and bail out
early if the App Installer gives us an answer.
After the nightly build completes, we'll automatically generate a
.appinstaller and publich it plus the msixbundle to an Azure Storage
account.
I had to add step/job customization to the publish step in the full
release pipeline template.
The .appinstaller hardcodes our XAML dependency, which makes it a bit of
a pain. We can revisit this later, and publish our dependencies
directly and automatically instead of hardcoding them.
I am considering moving the appinstaller generation step to the MSIX
bundling job, but this works right now and is not too terrible.
Closes#774
When launching a debug Terminal, `_initializedTerminal` might still be false and the scrollbar might still be 0px tall. This causes the `assert(false)` condition within `_throttledUpdateScrollbar` to be hit.
Regressed in #16006
Previously, all unknown escape sequences would lead to an immediate call
to `VtEngine::_Flush()`. This lead to problems with nushell which uses
FTCS marks that were unknown to us. Combined with the linewise redrawing
that nushell does, Terminal would get the prompt in two separate frames,
causing a slight flickering.
#14677 fixed this by suppressing the `_Flush()` call when unknown
sequences are encountered. Unfortunately, this triggered a bug due
to our somewhat "inconsistent" architecture in conhost:
`XtermEngine::WriteTerminalW` isn't just used to flush unknown sequences
but also used directly by `InputBuffer::PassThroughWin32MouseRequest`
to write its mouse sequence directly to the ConPTY host.
`VtEngine` already contains a number of specialized member functions
like `RequestWin32Input()` to ensure that `_Flush()` is called
immediately and another member could've been added to solve this issue.
This commit now adds `RequestMouseMode` in the same vein.
But I believe we can make the system more robust in general by using
eager flushing by default (= safe), similar to how a `write()` on a
TCP socket flushes by default, and instead only selectively pause and
unpause flushing with a system similar to `TCP_CORK`.
This seems to work fairly well, as it solves:
* The original nushell bug
* The new bug
* Improves overall throughput by ~33% (due to less flushing)
In particular the last point is noteworthy, as this commit removes
the last performance bottleneck in ConPTY that isn't `VtEngine`.
Around ~95% of all CPU and wall time is spent in there now and any
improvements to `VtEngine` should yield immediately results.
Closes#15711
## Validation Steps Performed
* Clone/Run https://github.com/chrisant996/repro_enable_mouse_input
* Hold Ctrl+Alt and circle with the mouse over the viewport
* Repro.exe prints the current cursor coordinates ✅
* Run nushell
* No flickering when typing in the prompt ✅
The Win32 API is significantly faster than the WinRT one, in the order
of around 300-1000x depending on the CPU and CPU load.
This might slightly improve the situation around #15315, but I suspect
that it requires many more fixes. For instance, we don't really have a
single text input "queue" into which we write. Multiple routines that
`resume_background` just to `WriteFile` into the input pipe are thus
racing against each other, contributing to the laggy feeling.
I also fear that the modern Windows text stack might be inherently
RPC based too, producing worse lag with rising CPU load.
This might fix#14323
## Validation Steps Performed
* Paste text from Edge ✅
* Paste text from Notepad ✅
* Right click the address bar in Explorer, choose "Copy address",
paste text into WT ✅
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
This commit fixes 2 issues:
* `ControlCore::ScrollMarks()` would call `ResetIfStale`
again while the search prompt hasn't changed.
This has been fixed by using `_cachedSearchResultRows` as
the indicator for whether it needs to be recreated or not.
* While typing a search query, the selection would move among the
results with each typed character, because `MovePastCurrentSelection`
would do what its name indicates. It has been renamed and rewritten
to be `MoveToCurrentSelection`. To avoid breaking UIA, the previous
`MovePastPoint` implementation was kept.
Since the new `MoveToCurrentSelection` function would not move past the
current selection anymore, changing the direction would not move past
the current result either. To fix this, we now don't invalidate the
search cache when changing the direction.
Closes#15954
## Validation Steps Performed
* Run ``"helloworld`n"*20`` in pwsh
* Search for "helloworld"
* While typing the characters the selection doesn't move ✅
* ...nor when searching downwards ✅
* ...nor when erasing parts of it ✅
* ...and it behaves identical in conhost ✅
`ImmersiveColorSet` gets sent more often than just on a theme change. It notably gets sent when the PC is locked, or the UAC prompt opens.
## Validation Steps Performed
Tested manually by setting the font to `garbo`and:
* locking, then logging back in. No dialog ✅
* UAC via run dialog + `regedit`. No dialog ✅
* Actually changing the OS theme. Dialog ✅Closes#15732
As mentioned in #15760
> > When you right-click on a non-active pane, it becomes active, but the context menu may be displayed before this happens, thus showing the Restart Connection item based the wrong pane's status.
>
> As far as I can see, when a pane is (right)clicked:
>
> 1. If unfocused, `Focus` is called. This goes through the `GotFocus` handler which eventually calls `tab->_UpdateActivePane(sender);`
> 2. `PointerPressed` is raised which eventually shows the context menu
>
> The first point is done asynchronously, so may update the active pane too late when the menu is already displayed (despite both end up in the UI thread).
To fix this: we plumb the control that the context menu was opened for all the way through to where the event is actually handled (in `_PopulateContextMenu`)
* [x] Tested manually
Co-authored-by: Marco Pelagatti <1140981+mpela81@users.noreply.github.com>
Saving the SUI with an empty "keys" will persist `"keys": ""` to the
JSON.
The keychord parser tries to parse that.
`KeyChordSerialization.cpp@_fromString` returns a KeyChord with both
vkey and scancode set to 0, and the ctor asserts and explodes.
We shouldn't do that.
Closes#13221
I noticed this last week, but forgot to file. If you have a pair of
splits, and `exit -1` the first, you can't use `enter` to restart it.
This PR fixes that. Basically, `TerminalPage` registers it's
`_restartPaneConnection` handler when it makes a new `Pane` object. It
registers the callback straight to the `Pane`. However, when a `Pane`
gets split, it makes a _new_ `Pane` object, and moves the original
content into the new pane. `TerminalPage` however, would never hook up
its own callback to that newly created pane.
This fixes that.
This pull request moves HwndTerminal into Microsoft.Terminal.Control.Lib
and removes PublicTerminalCore completely.
Microsoft.Terminal.Control.dll now exports the C API from HwndTerminal.
This adds ~100kb to Microsoft.Terminal.Control.dll and ~1400kb to the
WPF package (per architecture) but with the coming interactivity
platform merge it's going to benefit us big time.
This replaces the use of a `<Canvas>` with an `<Image>` for drawing
scrollbar marks. Otherwise, WinUI struggles with the up to ~9000 UI
elements as they get dirtied every time the scrollbar moves.
(FWIW 9000 is not a lot and it should not struggle with that.)
The `<Image>` element has the benefit that we can get hold of a CPU-side
bitmap which we can manually draw our marks into and then swap them into
the UI tree. It draws the same 9000 elements, but now WinUI doesn't
struggle anymore because only 1 element gets invalidated every time.
Closes#15955
## Validation Steps Performed
* Fill the buffer with "e"
* Searching for "e" fills the entire thumb range with white ✅
* ...doesn't lag when scrolling around ✅
* ...updates quickly when adding newlines at the end ✅
* Marks sort of align with their scroll position ✅
Adding enum iconstyle for hiding the icon in the tab #8157
## Summary of the Pull Request
Please confirm if I am on the right track.
## References and Relevant Issues
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
## PR Checklist
- [ ] Closes#8157
- [x] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
This PR is a few things:
* part the first: Convert the `compatibility.reloadEnvironmentVariables`
setting to a per-profile one.
* The settings should migrate it from the user's old global place to the
new one.
* We also added it to "Profile>Advanced" while I was here.
* Adds a new pair of commandline flags to `new-tab` and `split-pane`:
`--inheritEnvironment` / `--reloadEnvironment`
* On `wt` launch, bundle the entire environment that `wt` was spawned
with, and put it into the `Remoting.CommandlineArgs`, and give them to
the monarch (and ultimately, down to `TerminalPage` with the
`AppCommandlineArgs`). DO THIS ALWAYS.
* As a part of this, we’ll default to _reloading_ if there’s no explicit
commandline set, and _inheriting_ if there is.
* For example, `wt -- cmd` would inherit, and `wt -p “Command Prompt”`
would reload.[^1]
* This is a little wacky, but we’re trying to separate out the
intentions here:
* `wt -- cmd` feels like “I want to run cmd.exe (in a terminal tab)”.
That feels like the user would _like_ environment variables from the
calling process. They’re doing something more manual, so they get more
refined control over it.
* `wt` (or `wt -p “Command Prompt”`) is more like, “I want to run the
Terminal (or, my Command Prompt profile) using whatever the Terminal
would normally do”. So that feels more like a situation where it should
just reload by default. (Of course, this will respect their settings
here)
## References and Relevant Issues
https://github.com/microsoft/terminal/issues/15496#issuecomment-1692450231
has more notes.
## Detailed Description of the Pull Request / Additional comments
This is so VERY much plumbing. I'll try to leave comments in the
interesting parts.
## PR Checklist
- [x] This is not _all_ of #15496. We're also going to do a `-E foo=bar`
arg on top of this.
- [x] Tests added/passed
- [x] Schema updated
[^1]: In both these cases, plus the `environment` setting, of course.
## Summary of the Pull Request
When a connection is Closed, show an indicator in the respective tab.
When the active pane's connection is Closed, show a "Restart Connection"
action in the right-click context menu and in the tab context menu.
## Validation Steps Performed
- Force close a connection, check the indicator is shown in the tab.
- Right-click on pane shows the Restart Connection action if its
connection is closed
- Right-click on tab shows the Restart Connection action if the active
pane's connection is closed
- Indicator is cleared after connection is restarted (no panes in closed
state)
## PR Checklist
- [x] Closes#14909
- [x] Tests added/passed
- [ ] Documentation updated
- [ ] Schema updated (if necessary)
Since the "delete color scheme" button is filled with an icon and a Text
Box, the text is not automatically exposed as the autoProp.Name for the
button. We have to do it manually just like we do for "delete profile".
Validated manually using accessibility insights
Closes#15984
`Terminal` is used concurrently by at least 4 threads. The table
below lists the class members and the threads that access them
to the best of my knowledge. Where:
* UI: UI Thread
* BG: Background worker threads (`winrt::resume_background`)
* RD: Render thread
* VT: VT connection thread
| | UI | BG | RD | VT |
|------------------------------------|----|----|----|----|
| `_pfnWriteInput` | x | x | | x |
| `_pfnWarningBell` | | | | x |
| `_pfnTitleChanged` | | | | x |
| `_pfnCopyToClipboard` | | | | x |
| `_pfnScrollPositionChanged` | x | x | | x |
| `_pfnCursorPositionChanged` | | | | x |
| `_pfnTaskbarProgressChanged` | | | | x |
| `_pfnShowWindowChanged` | | | | x |
| `_pfnPlayMidiNote` | | | | x |
| `_pfnCompletionsChanged` | | | | x |
| `_renderSettings` | x | | x | x |
| `_stateMachine` | x | | | x |
| `_terminalInput` | x | | | x |
| `_title` | x | | x | x |
| `_startingTitle` | x | | x | |
| `_startingTabColor` | x | | | |
| `_defaultCursorShape` | x | | | x |
| `_systemMode` | | x | x | x |
| `_snapOnInput` | x | x | | |
| `_altGrAliasing` | x | | | |
| `_suppressApplicationTitle` | x | | | x |
| `_trimBlockSelection` | x | | | |
| `_autoMarkPrompts` | x | | | |
| `_taskbarState` | x | | | x |
| `_taskbarProgress` | x | | | x |
| `_workingDirectory` | x | | | x |
| `_fontInfo` | x | | x | |
| `_selection` | x | x | x | x |
| `_blockSelection` | x | x | x | |
| `_wordDelimiters` | x | x | | |
| `_multiClickSelectionMode` | x | x | x | |
| `_selectionMode` | x | x | x | |
| `_selectionIsTargetingUrl` | x | x | x | |
| `_selectionEndpoint` | x | x | x | |
| `_anchorInactiveSelectionEndpoint` | x | x | x | |
| `_mainBuffer` | x | x | x | x |
| `_altBuffer` | x | x | x | x |
| `_mutableViewport` | x | | x | x |
| `_scrollbackLines` | x | | | |
| `_detectURLs` | x | | | |
| `_altBufferSize` | x | x | x | x |
| `_deferredResize` | x | | | x |
| `_scrollOffset` | x | x | x | x |
| `_patternIntervalTree` | x | x | x | x |
| `_lastKeyEventCodes` | x | | | |
| `_currentPromptState` | x | | | x |
Only 7 members are specific to one thread and don't require locking.
All other members require some for of locking to be safe for use.
To address the issue this changeset adds `LockForReading/LockForWriting`
calls everywhere `_terminal` is accessed in `ControlCore/HwndTerminal`.
Additionally, to ensure these issues don't pop up anymore, it adds to
all `Terminal` functions a debug assertion that the lock is being held.
Finally, because this changeset started off rather modest, it contains
changes that I initially made without being aware about the extent of
the issue. It simplifies the access around `_patternIntervalTree` by
making `_InvalidatePatternTree()` directly use that member.
Furthermore, it simplifies `_terminal->SetCursorOn(!IsCursorOn())` to
`BlinkCursor()`, allowing the code to be shared with `HwndTerminal`.
Ideally `Terminal` should not be that much of a class so that we don't
need such coarse locking. Splitting out selection and rendering state
should allow deduplicating code with conhost and use finer locking.
Closes#9617
## Validation Steps Performed
I tried to use as many Windows Terminal features as I could and fixed
every occurrence of `_assertLocked()` failures.
## Summary of the Pull Request
Resolves the following in #15812
> - [x] `toggleBroadcastInput` isn't in the default settings
> - [x] The cursors forget to keep blinking if you focus each pane and
then unfocus them
> - [x] They don't stop blinking when you unbroadcast
> - [x] Broadcast border doesn't appear when you make new panes, but
they ARE broadcasted-to!
## References and Relevant Issues
x-ref:
* #2634
* #14393
## Detailed Description of the Pull Request / Additional comments
There was literally no logic in the original PR for starting the cursor
blinking. It's entirely unknowable how that ever worked. This makes it
all much more explicit.
We're taking the hacky `DisplayCursorWhileBlurred` from #15363, and
promoting that to the less-hacky `CursorVisibility`. Broadcast input
mode can use that to force the cursor to be visible always.
The last checkbox in that issue is harder, and I didn't want to further
pollute this delta with the paste plumbing.
Previously, the duplication method considered only the next to the selected tab(`tab.TabViewIndex() + 1`) as the insert position. Changed that to consider the setting.
Closes#15776
This is a theoretical improvement for #15553 where Windows Terminal
crashed due to AtlasEngine accessing the soft font bitmap outside of
bounds. The problem is that the soft font cell size was non-zero.
This PR hardens against such situations by checking whether the
requested soft font index is inside the bounds of the bitmaps.
The improvement couldn't be tested as it couldn't be reproduced.
`SetConsoleWindowInfoImpl` calls `PostUpdateWindowSize`, which emits a
`CM_SET_WINDOW_SIZE` event, which causes `_InternalSetWindowSize` to be
called, which calls `ScreenBufferSizeChange` which then finally emits a
`WINDOW_BUFFER_SIZE_EVENT` event into the client input buffer.
This messes up applications like which make use of
`WINDOW_BUFFER_SIZE_EVENT` to perform potentially lossy operations.
In case of SSH this results in a resize (SIGWINCH) of the server-side
screen which similarly may result in a response by the shell, etc.
Since that happens over networks and is async, and because our conhost
VT viewport implementation appears to have a number of subtle bugs,
this results in duplicate output lines (sometimes hundreds).
Under Windows Terminal this issue is not as apparent, since ConPTY has
no viewport that can be moved and no scrollback. It only appears as an
issue if a terminal application reacts poorly to the SIGWINCH event.
Closes#15769
## Validation Steps Performed
* Set a breakpoint in `SynthesizeWindowBufferSizeEvent`
* Launch WSL and cause the viewport to move down
No calls to `SynthesizeWindowBufferSizeEvent` ✅
* Execute `tput reset`
Input line moves to row 0 ✅
WinAppDriver depends on a bunch of .NET assemblies that collide *big time*. Let's just quarantine it.
I kept the fallback to $TESTDIR\WinAppDriver.exe because there's a chance that the Windows build depends on it.
* `[[nodiscard]]` and `[[maybe_unused]]` must come before `virtual` and
`static` qualifiers
* We were calling the jsoncpp constructors directly (again) as functions
(again)
* Some of our preprocessor `#endif` lines were quite messed up
(`-Winvalid-token`)
* One of our test projects was using somebody else's `precomp.h`
Related to #14871
This commit fixes 3 bugs:
* `COOKED_READ_DATA` failed to initialize its `_distanceCursor` and
`_distanceEnd` members. I took this as an opportunity to make them
`ptrdiff_t`, to reduce the likelihood of overflows in the future.
* `COOKED_READ_DATA::_writeChars` added `scrollY` to the written
distance, even though `WriteCharsLegacy` writes a negative value into
that out parameter. This was fixed by changing `WriteCharsLegacy` to
write positive values and by adding a debug assertion.
* `StreamScrollRegion` calls `IncrementCircularBuffer` which causes a
synchronous (!) ConPTY flush to the output pipe (side note: this is
the primary reason why newlines are so slow in ConPTY).
Since cooked reads are supposed to behave like a pager and not write
into the scrollback, we temporarily mark the buffer as inactive
which prevents `TextBuffer` from snitching about it to VtEngine.
Even after this change, there's still some weird behavior left:
* You cannot move your cursor back beyond (0,0), because this isn't a
real pager-like implementation. That might be a neat future extension.
* Writing a lot of text and pressing Ctrl+C doesn't properly place the
cursor and scroll the buffer, unless the cursor is at the end.
That might also be worth investigating in the future (minor issue).
* When the viewport is full, backspacing more than 1 line of text
(using Ctrl+Backspace) doesn't erase all of the affected lines,
because `COOKED_READ_DATA::_erase` uses the same `WriteCharsLegacy`
function to write whitespace to erase that text. It's only gone
after typing one more character.
I've written the code to mostly fix this, but decided against it
as I considered the problem to be too niche to warrant extra code.
Closes#15899
## Validation Steps Performed
* Generate some text to paste in PowerShell:
```pwsh
"" + (0..512 | % { "word" + $_.ToString().PadLeft(4, "0") })
```
* Launch cmd.exe and paste that text
* No flickering ✅
* No writing into the scrollback ✅
* No weird behavior when backspacing ✅
This commit fixes the identity of our new canary packages.
Additionally, it slightly reorders one block so that the file is
almost entirely in the same layout as the preview appxmanifest,
allowing for a better direct comparison (with git diff, etc.).
Underline color sequence _SGR 58_ (unlike *SGR 38*, *SGR 48*) only works
with sub parameters, eg. `\e[58:5:<n>m` or `\e[58:2::<r>:<g>:<b>m` will
work, but something like `\e[58;5;<n>m` won't work. This is a
requirement for the implementation to avoid problems with VT clients
that don't support sub parameters.
## Detailed Description
- Added `underlineColor` to `TextAttribute`, and `UnderlineStyle` into
`CharacterAttributes`.
- Added two new entries in `GraphicOptions` namely, `UnderlineColor`
(58) and `UnderlineColorDefault` (59).
- _SGR 58_ renders a sequence with sub parameters in the VT renderer.
- _SGR 4:x_ renders a sequence with sub parameters in the VT renderer,
except for single, double, and no-underline, which still use
backward-compatible _SGR 4_, _SGR 21_ and _SGR 24_.
- `XtermEngine` will send `\e[4m` without any styling information. This
means all underline style (except NoUnderline) will be rendered as
single underline.
## Reference issues
- #7228
### PR Checklist
- [x] update DECRARA, DECCARA to respect underline color and style.
- [x] update DECRQSS to send underline color and style in the query
response.
- [x] update DECRQPSR/DECRSPS/DECCIR
- [x] Tests added
## Summary of the Pull Request
Closes#7158
Enabling Acrylic as both an appearance setting (with all the plumbing),
allowing it to be set differently in both focused and unfocused
terminals. EnableUnfocusedAcrylic Global Setting that controls if
unfocused acrylic is possible so that people can disable that behavior.
## References and Relevant Issues
#7158 , references: #15913 , #11092
## Detailed Description of the Pull Request / Additional comments
### Allowing Acrylic to be set differently in both focused and unfocused
terminals:
#### A
#### B
#### C
#### D
``` json
"profiles":
{
"list":
[
{
"commandline": "pwsh.exe",
"name": "A",
"unfocusedAppearance":
{
"useAcrylic": true,
},
"useAcrylic": true,
},
{
"commandline": "pwsh.exe",
"name": "B",
"unfocusedAppearance":
{
"useAcrylic": false,
},
"useAcrylic": true,
},
{
"commandline": "pwsh.exe",
"name": "C",
"unfocusedAppearance":
{
"useAcrylic": true,
},
"useAcrylic": false,
},
{
"commandline": "pwsh.exe",
"name": "D",
"unfocusedAppearance":
{
},
"useAcrylic": false,
},
]
}
```
- **A**: AcrylicBlur always on
- **B**: Acrylic when focused, not acrylic when unfocused
- **C**: Why the hell not. Not Acrylic when focused, Acrylic when
unfocused.
- **D:** Possible today by not using Acrylic.
### EnableUnfocusedACrylic global setting that controls if unfocused
acrylic is possible
So that people can disable that behavior:
### Alternate approaches I considered:
Using `_InitializeBackgroundBrush` call instead of
`_changeBackgroundColor(bg) in
``TermControl::_UpdateAppearanceFromUIThread`. Comments in this function
mentioned:
``` *.cs'
// In the future, this might need to be changed to a
// _InitializeBackgroundBrush call instead, because we may need to
// switch from a solid color brush to an acrylic one.
```
I considered using this to tackle to problem, but don't see the benefit.
The only time we need to update the brush is when the user changes the
`EnableUnfocusedAcrylic ` setting which is already covered by
`fire_and_forget TermControl::UpdateControlSettings`
### Supporting different Opacity in Focused and Unfocused Appearance???
This PR is split up in two parts #7158 covers allowing Acrylic to be set
differently in both focused and unfocused terminals. And
EnableUnfocusedAcrylic Global Setting that controls if unfocused acrylic
is possible so that people can disable that behavior.
#11092 will be about enabling opacity as both an appearance setting,
allowing it to be set differently in both focused and unfocused
terminals.
### Skipping the XAML for now:
“I actually think we may want to skip the XAML on this one for now.
We've been having some discussions about compatibility settings, global
settings, stuff like this, and it might be _more- confusing to have you
do something here. We can always add it in post when we decide where to
put it.”
-- Mike Griese
## Validation Steps Performed
#### When Scrolling Mouse , opacity changes appropriately, on opacity
100 there are no gray lines or artefacts
#### When Adjusting Opacity through command palette, opacity changes
appropriately, on opacity 100 there are no gray lines or artefacts
#### When opening command palette state goes to unfocused, the acrylic
and color change appropriately
#### Stumbled upon a new bug when performing validation steps #15913
## PR Checklist
- [x] Closes#7158
- [X] Tests added/passed
- [X] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [x] Schema updated (if necessary)
---------
Co-authored-by: Mike Griese <migrie@microsoft.com>
`TerminalTab::_RecalculateAndApplyReadOnly` didn't know about whether a
tab should be closable or not, based on the theme settings. Similarly
(though, unreported), the theme update in
`TerminalPage::_updateAllTabCloseButtons` didn't really know about
readonly mode.
This fixes both these issues by moving responsibility for the tab close
button visibility into `TabBase` itself.
Closes#15902
I manually changed the permissions on `HKCU\Console` to deny "Create
subkey" to myself. Then confirmed that it explodes before this change,
and not after this change.
Closes#15458
When marking newly scrolled in rows as invalidated we used:
```
if (offset < 0)
...
else
...
```
But it should've been:
```
if (offset < 0)
...
else if (offset > 0)
...
```
Because now it always set the start of the invalidated rows range to 0.
Additionally, this includes a commented debug helper which I've used
to figure out an unrelated bug. During that search I found this bug.
This is a resurrection of #8588. That PR became painfully stale after
the `ControlCore` split. Original description:
> ## Summary of the Pull Request
> This is a PoC for:
> * Search status in SearchBox (aka number of matches + index of the
current match)
> * Live search (aka search upon typing)
> ## Detailed Description of the Pull Request / Additional comments
> * Introduced this optionally (global setting to enable it)
> * The approach is following:
> * Every time the filter changes, enumerate all matches
> * Upon navigation just take the relevant match and select it
>
I cleaned it up a bit, and added support for also displaying the
positions of the matches in the scrollbar (if `showMarksOnScrollbar` is
also turned on).
It's also been made SUBSTANTIALLY easier after #15858 was merged.
Similar to before, searching while there's piles of output running isn't
_perfect_. But it's pretty awful currently, so that's not the end of the
world.
Gifs below.
* closes#8631 (which is a bullet point in #3920)
* closes#6319
Co-authored-by: Don-Vito <khvitaly@gmail.com>
---------
Co-authored-by: khvitaly <khvitaly@gmail.com>
`PaintCursor()` is only called when the cursor is visible, but we need
to invalidate the cursor area even if it isn't. Otherwise a transition
from a visible to an invisible cursor wouldn't be rendered.
I'm confident that this closes#15199
## Validation Steps Performed
* Set blink duration extremely high
* Launch pwsh.exe
* Press Enter a few times
* Press Ctrl+L
* There are never 2 cursors visible, not even briefly ✅
Font features require us to skip the fast path via `GetTextComplexity`.
`IDWriteTextLayout` handles it the same way internally.
Closes#15896
## Validation Steps Performed
* Use Cascadia Code
* Set `features: { "ss19": 1 }`
* "0" has a dash in it instead of a dot ✅
This should allow the package to be installed without AppXSvc consulting
the store or the licensing service.
It's free and open-source. It shouldn't need a license to run.
Pattern tree coordinates are viewport-relative.
Closes#15891
## Validation Steps Performed
* Print some text so the viewport scrolls down
* Print a URL
* URL is underlined on hover ✅
This is a small optimization that makes COOKED_READ_DATA erase short
runs of text more quickly. It's not really necessary to do this as
this code is not a hotpath, but I felt like it's neater this way.
It requires no heap allocations even for long runs of text.
## Validation Steps Performed
* Deleting text anywhere in a prompt erases it ✅
This massive refactoring has two goals:
* Enable us to go beyond UCS-2 support for input editing
* Bring clarity into `COOKED_READ_DATA`'s inner workings
Unfortunately, over time, knowledge about its exact operation was lost.
While the new code is still complex it reduces the amount of code by 4x
which will make preserving knowledge hopefully significantly easier.
The new implementation is simpler and slower than the old one in a way,
because every time the input line is modified it's rewritten to the text
buffer from scratch. This however massively simplifies the underlying
algorithm and the amount of state that needs to be tracked and results
in a significant reduction in code size. It also makes it more robust,
because there's less code now that can be incorrect.
This "optimization laziness" can be afforded due the recent >10x
improvements to `TextBuffer`'s text ingestion performance.
For short inputs (<1000 characters) I still expect this implementation
to outperform the conhost from the past.
It has received one optimization already however: While reading text
from the `InputBuffer` we'll now defer writing into the `TextBuffer`
until we've stopped reading. This improves the overhead of pasting text
from O(n^2) to O(n), which is immediately noticeable for inputs >100kB.
Resizing the text buffer still ends up corrupting the input line
however, which unfortunately cannot be fixed in `COOKED_READ_DATA`.
The issue occurs due to bugs in `TextBuffer::Reflow` itself, as it
misplaces the cursor if the prompt is on the last line of the buffer.
Closes#1377Closes#1503Closes#4628Closes#4975Closes#5033Closes#8008
This commit is required to fix#797
## Validation Steps Performed
* ASCII input ✅
* Chinese input (中文維基百科) ❔
* Resizing the window properly wraps/unwraps wide glyphs ❌
Broken due to `TextBuffer::Reflow` bugs
* Surrogate pair input (🙂) ❔
* Resizing the window properly wraps/unwraps surrogate pairs ❌
Broken due to `TextBuffer::Reflow` bugs
* In cmd.exe
* Create 2 file: "a😊b.txt" and "a😟b.txt"
* Press tab: Autocompletes "a😊b.txt" ✅
* Navigate the cursor right past the "a"
* Press tab twice: Autocompletes "a😟b.txt" ✅
* Backspace deletes preceding glyphs ✅
* Ctrl+Backspace deletes preceding words ✅
* Escape clears input ✅
* Home navigates to start ✅
* Ctrl+Home deletes text between cursor and start ✅
* End navigates to end ✅
* Ctrl+End deletes text between cursor and end ✅
* Left navigates over previous code points ✅
* Ctrl+Left navigates to previous word-starts ✅
* Right and F1 navigate over next code points ✅
* Pressing right at the end of input copies characters
from the previous command ✅
* Ctrl+Right navigates to next word-ends ✅
* Insert toggles overwrite mode ✅
* Delete deletes next code point ✅
* Up and F5 cycle through history ✅
* Doesn't crash with no history ✅
* Stops at first entry ✅
* Down cycles through history ✅
* Doesn't crash with no history ✅
* Stops at last entry ✅
* PageUp retrieves the oldest command ✅
* PageDown retrieves the newest command ✅
* F2 starts "copy to char" prompt ✅
* Escape dismisses prompt ✅
* Typing a character copies text from the previous command up
until that character into the current buffer (acts identical
to F3, but with automatic character search) ✅
* F3 copies the previous command into the current buffer,
starting at the current cursor position,
for as many characters as possible ✅
* Doesn't erase trailing text if the current buffer
is longer than the previous command ✅
* Puts the cursor at the end of the copied text ✅
* F4 starts "copy from char" prompt ✅
* Escape dismisses prompt ✅
* Erases text between the current cursor position and the
first instance of a given char (but not including it) ✅
* F6 inserts Ctrl+Z ✅
* F7 without modifiers starts "command list" prompt ✅
* Escape dismisses prompt ✅
* Minimum size of 40x10 characters ✅
* Width expands to fit the widest history command ✅
* Height expands up to 20 rows with longer histories ✅
* F9 starts "command number" prompt ✅
* Left/Right paste replace the buffer with the given command ✅
* And put cursor at the end of the buffer ✅
* Up/Down navigate selection through history ✅
* Stops at start/end with <10 entries ✅
* Stops at start/end with >20 entries ✅
* Wide text rendering during pagination with >20 entries ✅
* Shift+Up/Down moves history items around ✅
* Home navigates to first entry ✅
* End navigates to last entry ✅
* PageUp navigates by 20 items at a time or to first ✅
* PageDown navigates by 20 items at a time or to last ✅
* Alt+F7 clears command history ✅
* F8 cycles through commands that start with the same text as
the current buffer up until the current cursor position ✅
* Doesn't crash with no history ✅
* F9 starts "command number" prompt ✅
* Escape dismisses prompt ✅
* Ignores non-ASCII-decimal characters ✅
* Allows entering between 1 and 5 digits ✅
* Pressing Enter fetches the given command from the history ✅
* Alt+F10 clears doskey aliases ✅
Uses the `RaiseNotificationEvent()` API from UIA automation peers to
announce successful `MovePane` and `MoveTab` actions. The announcements
are localized in the resw file.
Closes#15159
Based on #13575
The ultimate goal of this PR was to use ICU for text search to
* Improve Unicode support
Previously we used `towlower` and only supported BMP glphs.
* Improve search performance (10-100x)
This allows us to search for all results in the entire text buffer
at once without having to do so asynchronously.
Unfortunately, this required some significant changes too:
* ICU's search facilities operate on text positions which we need to be
mapped back to buffer coordinates. This required the introduction of
`CharToColumnMapper` to implement sort of a reverse-`_charOffsets`
mapping. It turns text (character) positions back into coordinates.
* Previously search restarted every time you clicked the search button.
It used the current selection as the starting position for the new
search. But since ICU's `uregex` cannot search backwards we're
required to accumulate all results in a vector first and so we
need to cache that vector in between searches.
* We need to know when the cached vector became invalid and so we have
to track any changes made to `TextBuffer`. The way this commit solves
it is by splitting `GetRowByOffset` into `GetRowByOffset` for
`const ROW` access and `GetMutableRowByOffset` which increments a
mutation counter on each call. The `Search` instance can then compare
its cached mutation count against the previous mutation count.
Finally, this commit makes 2 semi-unrelated changes:
* URL search now also uses ICU, since it's closely related to regular
text search anyways. This significantly improves performance at
large window sizes.
* A few minor issues in `UiaTracing` were fixed. In particular
2 functions which passed strings as `wstring` by copy are now
using `wstring_view` and `TraceLoggingCountedWideString`.
Related to #6319 and #8000
## Validation Steps Performed
* Search upward/downward in conhost ✅
* Search upward/downward in WT ✅
* Searching for any of ß, ẞ, ss or SS matches any of the other ✅
* Searching for any of Σ, σ, or ς matches any of the other ✅
To make this happen, I moved most of `release.yml` into a shared
_pipeline_ template (which is larger than a steps or jobs template).
Most of the diffs are due to that move.
If you compare main:build/pipelines/release.yml against
dev/duhowett/nightly-build:build/pipelines/templates-v2/pipeline-full-release-build.yml,
you will see that the changes are much more minimal than they look.
I also added a parameter to configure how long symbols will be kept. It
defaults to 36530 days (which is the default for the PublishSymbols
task! Yes, 100 years!) but nightly builds will get 15 days.
I originally just wanted to close#1104, but then discovered that hey,
this event wasn't even used anymore. Excerpts of Teams convo:
* [Snap to character grid when resizing window by mcpiroman · Pull
Request #3181 · microsoft/terminal
(github.com)](https://github.com/microsoft/terminal/pull/3181/files#diff-d7ca72e0d5652fee837c06532efa614191bd5c41b18aa4d3ee6711f40138f04c)
added it to Tab.cpp
* where it was added
* which called `pane->Relayout` which I don't even REMEMBER
* By [Add functionality to open the Settings UI tab through openSettings
by leonMSFT · Pull Request #7802 · microsoft/terminal
(github.com)](https://github.com/microsoft/terminal/pull/7802/files#diff-83d260047bed34d3d9d5a12ac62008b65bd6dc5f3b9642905a007c3efce27efd),
there was seemingly no FontSizeChanged in Tab.cpp (when it got moved to
terminaltab.cpp)
> `Pane::Relayout` functionally did nothing because sizing was switched
to `star` sizing at some point in the past, so it was just deleted.
From [Misc pane refactoring by Rosefield · Pull Request #11373 ·
microsoft/terminal](https://github.com/microsoft/terminal/pull/11373/files#r736900998)
So, great. We can kill part of it, and convert the rest to a
`TypedEvent`, and get rid of `DECLARE_` / `DEFINE_`.
`ScrollPositionChangedEventArgs` was ALSO apparently already promoted to
a typed event, so kill that too.
Closes the active checkboxes in #15845. I'll leave that open till we get
to the endgame, I'm sure more will show up.
Closes:
- [x] Accessibility tags all have `CommandPalette_` strings 🤣
- [x] useCommandline should leave the cursor at the _end_ of the input,
not at the start
- [x] useCommandline, when bottom-up, should leave the _last_ list item
selected, not the first.
- [x] ^ Probably applies to any changes to the filter text when bottom
up.
This PR's goal is to allow something like a `Tab` to raise a
ShortcutAction, by saying "this action should be performed on ME". We've
had a whole category of these issues in the past:
* #15734
* #15760
* #13579
* #13942
* #13942
* Heck even dating back to #10832
So, this tries to remove a bit of that footgun. This probably isn't the
_final_ form of what this refactor might look like, but the code is
certainly better than before.
Basically, there's a few bits:
* `ShortcutActionDispatch.DoAction` now takes a `sender`, which can be
_anything_.
* Most actions that use a "Get the focused _thing_ then do something to
it" are changed to "If there was a sender, let's use that - otherwise,
we'll use the focused _thing_".
* TerminalTab was largely refactored to use this, instead of making
requests to the `TerminalPage` to just do a thing to it.
I've got a few TODO!s left, but wanted to get initial feedback.
* [x] `TerminalPage::_HandleTogglePaneZoom`
* [x] `TerminalPage::_HandleFocusPane`
* [x] `TerminalPage::_MoveTab`
Closes#15734
Added --appendCommandLine flag that when set, appends the command to the
preset command in the profile instead of replacing it.
Previously, there was no good way to launch wt while running a command
appended to the set command in the profile. Some uses include profiles
that are set to login or start an application.
Additional comments: Looking for a review, and expecting additional
changes that needs to be done. For example, I am not really sure on how
to include the the option's information in the CallForHelp() screen.
Also, would be great if someone could guide me on including tests for
this new feature. Thanks!
Closes#5528
---------
Co-authored-by: Charles Liu <hliu729@outlook.com>
Obviously, icons are all wrong. Color is about right but they need CAN
icons.
I'll leave that as an exercise for @DHowett to generate the right ones
as a follow-up.
Related to #774
Some folks over in MSAL land told us that client IDs don't need to be
kept secret.
This reduces the delta between "public" terminal and "release build"
terminal by one more file, leaving only the telemetry header left (which
won't be going public for obvious reasons).
This will also make it easier for contributors to test out Azure Cloud
Shell changes... and testing out VT without ConPTY interfering[^1].
[^1]: When Dev branding is selected, Azure Cloud Shell has the added
perk of being wired directly to TerminalCore rather than going through
ConPTY.
Switch the schema depending on the branding we're being built for
Ever since we started writing the entire settings file out ourselves,
we've had the opportunity to control which schema it uses.
This is a quality-of-life improvement for Preview users, and might make
life easier for Dev users as well.
For Debug builds, it even switches over to a local `file://` path to
the schema in the source directory!
Closes#6601
Add test for subparameter based `GraphicOptions`.
`GraphicsSingleWithSubParamTests` is added for subparameter based
`GraphicOptions`. This should've been included with #15729.
Also, while working on #15795, I realized creating and passing
subparameters for the tests is painful right now. I've added a small
util `MakeSubParamsAndRanges(...)` that eases creating subparameters and
subparameter ranges from a simple list of (lists of) subparameters.
## Validation Steps Performed
- All tests passed.
The OneBranch build system relies on the *build container host* being
able to publish all artifacts all at once. Therefore, our build steps
must not publish any artifacts.
I made it configurable so that the impact on existing pipelines was
minimal.
For every job that produces artifacts and is part of the release
pipeline, I am now exposing two variables that we can pass to OneBranch
so that it can locate and name artifacts:
- `JobOutputDirectory`, the output folder for the entire job
- `JobOutputArtifactName`, the name of the artifact produced by the job
I have also added a `variables` parameter to every job, so consuming
pipelines can override or insert their own variables.
#### Fix warnings due to formatting during a clean build
Seems like the compiler cares about them more than our formatter.
Possibly introduced in https://github.com/microsoft/terminal/pull/15062
## Validation Steps Performed
- Tests passed
I put them in that package like 40 years ago to get them into the build
system faster. They actually belong here.
I made them based on SVGs the Azure Cloud Shell team shared with us.
Some fonts implement ligatures by replacing a string like "&&" with
a whitespace padding glyph, followed by the actual "&&" glyph which
has a 1 column advance width. In that case the algorithm in
`_drawTextOverlapSplit` will get confused because it strictly scans
the input from left to right, searching for color changes.
The initial color is the glyph's color and so it breaks for such fonts
because then the first split will retain the last column's color.
## Validation Steps Performed
* Use JetBrains Mono
* Print ``"`e[91m`&`e[96m&`e[m"``
* Red and blue `&` appear ✅
---------
Co-authored-by: Tushar Singh <tusharvickey1999@gmail.com>
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
When a tab gets closed, `_RemoveTab` will call `TabBase::Shutdown()`,
which then re-raises the `Closed` event, which will end up calling
`_RemoveTab` again, etc. The only reason this didn't crash WT so far
is because `_RemoveOnCloseRoutine` contains a `resume_foreground`,
which would resolve the recursion and turn it into CPU usage.
It would spin as long as WinUI hasn't discard the tab object,
which takes an unpredictable amount of time.
Raising the `Closed` event from `Shutdown()` is unnecessary, because
the handlers of the event end up calling `_RemoveTab` anyways.
Technically the entire `Closed` event can be removed now, but I left it
in anyways because resolving the architectural "knot" around the way
tab closing after the last pane closes is implemented requires much
more significant changes.
This commit additionally removes the `_createCloseLock` mutex in `Pane`
as it was very likely not working as intended anyways. Only some methods
were protected by it and it doesn't avoid any STA/MTA/NA issues either.
## Validation Steps Performed
* Closing tabs and panes always ends up calling `Shutdown()` ✅
_targets #15027_
Adds a new suggestion source, `tasks`, that allows a user to open the
Suggestions UI with `sendInput` commands saved in their settings.
`source` becomes a flag setting, so it can be combined like so:
```json
{
"keys": "ctrl+shift+h", "command": { "action": "suggestions", "source": "commandHistory", "useCommandline":true },
},
{
"keys": "ctrl+shift+y", "command": { "action": "suggestions", "source": "tasks", "useCommandline":false },
},
{
"keys": "ctrl+shift+b", "command": { "action": "suggestions", "source": ["all"], "useCommandline":true },
},
```
If a nested command has `sendInput` commands underneath it, this will
build a tree of commands that only include `sendInput`s as leaves (but
leave the rest of the nesting structure intact).
## References and Relevant Issues
Closes#1595
See also #13445
As spec'd in #14864
## Validation Steps Performed
Tested manually
_targets #14943_
When this is true, this will re-use the existing commandline to
pre-filter the results. This is especially helpful for completing a
suggestion based on the text that's already been typed.
Like with command history, this requires that shell integration is
enabled before it will work.## Summary of the Pull Request
## References and Relevant Issues
See also #13445
As spec'd in #14864
## Validation Steps Performed
Tested manually
This does two bits:
1. correctly marks our tests as failed in xUnit, so that AzDo will pick
up that the tests have failed.
2. Actually intentionally mark skipped tests as skipped in xUnit. We
were doing this accidentally before.
3. Add a CI step to log test failures in a way that they can show up on
GitHub
Probably regressed around #6992 and #4490.
### details
#### Part the first
We were relying on the MUX build scripts to convert our WTT test logs to
xUnit format, which AzDo then ingests. That script we used relied on
some WinUI-specific logic around retrying tests. They have some logic to
auto-retry failed tests. They then mark a test as "skipped" if it passed
less than some threshold of times. Since we were never setting that
variable, we would mark a test as "skipped" if it had _0_ passes. So,
all failures showed up on AzDo as "skipped".
Why didn't we notice this? Well, the `Run-Tests.ps1` script will still
return `1` if _any_ tests failed. So the test job would fail if there
was a failure, AzDo just wouldn't know which test it was.
#### part the second
Updates `ConvertWttLogToXUnitLog` in `HelixTestHelpers.cs` to understand
that a test can be skipped, in addition to pass/fail. Removes all the
logic for dealing with retries, cause we didn't need that.
#### part the third
TAEF doesn't emit error messages in a way that AzDo can immediately pick
up on which tests failed. This means that Github gives us this useless
error message:
That's the only "error" that AzDo knows about.
This PR changes that by adding a build step to manually parse the xUnit
results, and log the names of any tests that failed. By logging them
with a prefix of `##vso[task.logissue type=error]`, then AzDo will
surface that text as an error message. GitHub can then grab that text
and surface it too.
### Addenda: Why aren't we using the VsTest module
as noted in
https://github.com/microsoft/terminal/pull/4490#issuecomment-583104982,
the vstest module is literally 6x slower than just running TAEF
directly.
This adds support for a new action, `showSuggestions`, as described in
#14864. This adds just one `source` currently, `recentCommands`. This
requires shell integration to be enabled in the shell to work properly.
When it is enabled, activating that action will invoke the suggestions
UI as a palette, populated with `sendInput` actions for each of the
user's recent commands.
* These don't persist across reboots.
* These are per-control.
There's mild plans to remedy that in a follow-up, though that needs a
bit more design consideration.
Closes#14779
## Summary of the Pull Request
This adds a new experimental per-setting to the terminal.
```ts
"experimental.repositionCursorWithMouse": bool
```
When:
* the setting is on
* AND you turn on shell integration (at least `133;B`)
* AND you click is somewhere _after_ the "active command" mark
we'll send a number of simulated keystrokes to the terminal based off
the number of cells between the place clicked and where the current
mouse cursor is.
## PR Checklist
- [ ] Related to #8573. I'm not marking as _closed_, because we should
probably polish this before we close that out. This is more a place to
start.
## Detailed Description of the Pull Request / Additional comments
There was a LOT of discussion in #8573. This is kinda a best effort
feature - it won't always work, but it should improve the experience
_most of the time_. We all kinda agreed that as much as the shell
probably should be responsible for doing this, there's myriad reasons
that won't work in practicality:
* That would also disable selection made by the terminal. That's a hard
sell.
* We'd need to invent some new mouse mode to support
click-to-reposition-but-drags-to-select-I-don't-want
* We'd then need shells to adopt that functionality.
And eventually settled that this was the least horrifying comprimise.
This has _e d g e c a s e s_:
* Does it work for wrapped lines? Well, kinda okay actually.
* Does it work for `vim`/`emacs`? Nope.
* Does it work for emoji/wide glyphs? I wouldn't expect it to! I mean,
emoji input is messed up anyways, right?
* Other characters like `ESC` (which are rendered by the shell as two
cells "^[")? Nope.
* Does it do selections? Nope.
* Clicking across lines with continuation prompts? Nope.
* Tabs? Nope.
* Wraps within tmux/screen? Nope.
https://github.com/xtermjs/xterm.js/blob/master/src/browser/input/MoveToCell.ts
has probably a more complete implementation of how we'd want to generate
the keypresses and such.
There's two parts to this PR that should be considered _separately_.
1. The Suggestions UI, a new graphical menu for displaying suggestions /
completions to the user in the context of the terminal the user is
working in.
2. The VsCode shell completions protocol. This enables the shell to
invoke this UI via a VT sequence.
These are being introduced at the same time, because they both require
one another. However, I need to absolutely emphasize:
### THE FORMAT OF THE COMPLETION PROTOCOL IS EXPERIMENTAL AND SUBJECT TO
CHANGE
This is what we've prototyped with VsCode, but we're still working on
how we want to conclusively define that protocol. However, we can also
refine the Suggestions UI independently of how the protocol is actually
implemented.
This will let us rev the Suggestions UI to support other things like
tooltips, recent commands, tasks, INDEPENDENTLY of us rev'ing the
completion protocol.
So yes, they're both here, but let's not nitpick that protocol for now.
### Checklist
* Doesn't actually close anything
* Heavily related to #3121, but I'm not gonna say that's closed till we
settle on the protocol
* See also:
* #1595
* #14779
* https://github.com/microsoft/vscode/pull/171648
### Detailed Description
#### Suggestions UI
The Suggestions UI is spec'ed over in #14864, so go read that. It's
basically a transient Command Palette, that floats by the user's cursor.
It's heavily forked from the Command Palette code, with all the business
about switching modes removed. The major bit of new code is
`SuggestionsControl::Anchor`. It also supports two "modes":
* A "palette", which is like the command palette - a list with a text
box
* A "menu", which is more like the intellisense flyout. No text box.
This is the mode that the shell completions use
#### Shell Completions Protocol
I literally cannot say this enough times - this protocol is experimental
and subject to change. Build on it at your own peril. It's disabled in
Release builds (but available in preview behind
`globals.experimental.enableShellCompletionMenu`), so that when it
ships, no one can take a dependency on it accidentally.
Right now we're just taking a blob of JSON, passing that up to the App
layer, who asks `Command` to parse it and build a list of `sendInput`
actions to populate the menu with. It's not a particularly elegant
solution, but it's good enough to prototype with.
#### How do I test this?
I've been testing this in two parts. You'll need a snippet in your
powershell profile, and a keybinding in the Terminal settings to trigger
it. The work together by binding <kbd>Ctrl+space</kbd> to _essentially_
send <kbd>F12</kbd><kbd>b</kbd>. Wacky, but it works.
```json
{ "command": { "action": "sendInput","input": "\u001b[24~b" }, "keys": "ctrl+space" },
```
```ps1
function Send-Completions2 {
$commandLine = ""
$cursorIndex = 0
# TODO: Since fuzzy matching exists, should completions be provided only for character after the
# last space and then filter on the client side? That would let you trigger ctrl+space
# anywhere on a word and have full completions available
[Microsoft.PowerShell.PSConsoleReadLine]::GetBufferState([ref]$commandLine, [ref]$cursorIndex)
$completionPrefix = $commandLine
# Get completions
$result = "`e]633;Completions"
if ($completionPrefix.Length -gt 0) {
# Get and send completions
$completions = TabExpansion2 -inputScript $completionPrefix -cursorColumn $cursorIndex
if ($null -ne $completions.CompletionMatches) {
$result += ";$($completions.ReplacementIndex);$($completions.ReplacementLength);$($cursorIndex);"
$result += $completions.CompletionMatches | ConvertTo-Json -Compress
}
}
$result += "`a"
Write-Host -NoNewLine $result
}
function Set-MappedKeyHandlers {
# VS Code send completions request (may override Ctrl+Spacebar)
Set-PSReadLineKeyHandler -Chord 'F12,b' -ScriptBlock {
Send-Completions2
}
}
# Register key handlers if PSReadLine is available
if (Get-Module -Name PSReadLine) {
Set-MappedKeyHandlers
}
```
### TODO
* [x] `(prompt | format-hex).`<kbd>Ctrl+space</kbd> -> This always
throws an exception. Seems like the payload is always clipped to
```{"CompletionText":"Ascii","ListItemText":"Ascii","ResultType":5,"ToolTip":"string
Ascii { get```
and that ain't JSON. Investigate on the pwsh side?
This pull request rewrites the entire Azure DevOps build system.
The guiding principles behind this rewrite are:
- No pipeline definitions should contain steps (or tasks) directly.
- All jobs should be in template files.
- Any set of steps that is reused across multiple jobs must be in
template files.
- All artifact names can be customized (via a property called
`artifactStem` on all templates that produce or consume artifacts).
- No compilation happens outside of the "Build" phase, to consolidate
the production and indexing of PDBs.
- **Building the project produces a `bin` directory.** That `bin`
directory is therefore the primary currency of the build. Jobs will
either produce or consume `bin` if they want to do anything with the
build outputs.
- All step and job templates are named with `step` or `job` _first_,
which disambiguates them in the templates directory.
- Most jobs can be run on different `pool`s, so that we can put
expensive jobs on expensive build agents and cheap jobs on cheap
build agents. Some jobs handle pool selection on their own, however.
Our original build pipelines used the `VSBuild` task _all over the
place._ This resulted in Terminal being built in myriad ways, different
for every pipeline. There was an attempt at standardization early on,
where `ci.yml` consumed jobs and steps templates... but when
`release.yml` was added, all of that went out the window.
The new pipelines are consistent and focus on a small, well-defined set
of jobs:
- `job-build-project`
- This is the big one!
- Takes a list of build configurations and platforms.
- Produces an artifact named `build-PLATFORM-CONFIG` for the entire
matrix of possibilities.
- Optionally signs the output and produces a bill of materials.
- Admittedly has a lot going on.
- `job-build-package-wpf`
- Takes a list of build configurations and platforms.
- Consumes the `build-` artifact for every config/platform
possibility, plus one for "Any CPU" (hardcoded; this is where the
.NET code builds)
- Produces one `wpf-nupkg-CONFIG` for each configuration, merging
all platforms.
- Optionally signs the output and produces a bill of materials.
- `job-merge-msix-into-bundle`
- Takes a list of build configurations and platforms.
- Consumes the `build-` artifact for every config/platform
- Produces one `appxbundle-CONFIG` for each configuration, merging
all platforms for that config into one `msixbundle`.
- Optionally signs the output and produces a bill of materials.
- `job-package-conpty`
- Takes a list of build configurations and platforms.
- Consumes the `build-` artifact for every config/platform
- Produces one `conpty-nupkg-CONFIG` for each configuration, merging
all platforms.
- Optionally signs the output and produces a bill of materials.
- `job-test-project`
- Takes **one** build config and **one** platform.
- Consumes `build-PLATFORM-CONFIG`
- Selects its own pools (hardcoded) because it knows about
architectures and must choose the right agent arch.
- Runs tests (directly on the build agent).
- `job-run-pgo-tests`
- Just like the above, but runs tests where `IsPgo` is `true`
- Collects all of the PGO counts and publishes a `pgc-intermediates`
artifact for that platform and configuration.
- `job-pgo-merge-pgd`
- Takes **one** build config and multiple platforms.
- Consumes `build-$platform-CONFIG` for each platform.
- Consumes `pgc-intermediates-$platform-CONFIG` for each platform.
- Merges the `pgc` files into `pgd` files
- Produces a new `pgd-` artifact.
- `job-pgo-build-nuget-and-publish`
- Consumes the `pgd-` artifact from above.
- Packs it into a `nupkg` and publishes it.
- `job-submit-windows-vpack`
- Only expected to run against `Release`.
- Consumes the `appxbundle-CONFIG` artifact.
- Publishes it to a vpack for Windows to consume.
- `job-check-code-format`
- Does not use artifacts. Runs `clang-format`.
- `job-index-github-codenav`
- Does not use artifacts.
Fuzz submission is broken due to changes in the `onefuzz` client.
I have removed the compliance and security build because it is no longer
supported.
Finally, this pull request has some additional benefits:
- I've expanded the PGO build phase to cover ARM64!
- We can remove everything Helix-related except the WTT parser
- We no longer depend on Helix submission or Helix pools
- The WPF control's inner DLLs are now codesigned (#15404)
- Symbols for the WPF control, both .NET and C++, are published
alongside all other symbols.
- The files we submit to ESRP for signing are batched up into a single
step[^1]
Closes#11874Closes#11974Closes#15404
[^1]: This will have to change if we want to sign the individual
per-architecture `.appx` files before bundling so that they can be
directly installed.
`IInputEvent` makes adding Unicode support to `InputBuffer` more
difficult than necessary as the abstract class makes downcasting
as well as copying quite verbose. I found that using `INPUT_RECORD`s
directly leads to a significantly simplified implementation.
In addition, this commit fixes at least one bug: The previous approach
to detect the null key via `DoActiveModifierKeysMatch` didn't work.
As it compared the modifier keys as a bitset with `==` it failed to
match whenever the numpad key was set, which it usually is.
## Validation Steps Performed
* Unit and feature tests are ✅
## Summary of the Pull Request
I updated the note prefix for blockquotes with GitHub latest built-in
styles.
## References and Relevant Issues
- https://github.com/orgs/community/discussions/16925
## Detailed Description of the Pull Request / Additional comments
This PR fixed the broken style due to their format change.
## Related former Pull Request
- https://github.com/microsoft/terminal/pull/13615
## Summary
Applications like PowerToys, with their keyboard remapping features
frequently (i.e whenever a remapped shortcut is triggerred) send
`KeyEvent` with out-of-range virtual keycode values (E.g. 0xFF). This is
fixed for WT in #7145, we just needed it in our good ol' `conhost`.
After this PR, Key events with an invalid virtual keycode and
scancode==0 are ignored, and are not added to the `InputBuffer`. Incase,
only virtual keycode is valid but not scancode, we will try to infer the
correct scancode using the virtual keycode mapping.
## References and Relevant Issues
#7145#7064
## Validation Steps Performed
- Triggered a remapped shortcut and verified that `showkey -a` doesn't
output `^@` unexpectedly.
- Key events with an Invalid virtual Keycode and Scancode == 0 are
ignored.
- This PR doesn't include any changes for `WM_[SYS][DEAD]CHAR` messages,
they are left unchanged.
This commit slightly modernizes `CommandHistory` by leaning more heavily
on the STL container functionalities. For one, it uses for-range
iterations to loop through `_commands` instead of using `GetNth`
on every iteration. Another major improvement however is that
the code previously copied entire `CommandHistory` instances out of
the linked list `s_historyLists`, then removed the slot and copied
(not moved!) that instance into the front again. Now it uses the
`splice` function from `std::list` to do it in `O(1)` and virtually
cost-free.
Another major improvement (and the one I'm personally interested in)
is the switch from `SHORT` to `int32_t`. This will greatly simplify
the implementation of the future `COOKED_READ_DATA` class, as the
larger integer type will remove worries about over/underflow.
For instance, we can then just blindly increment/decrement the history
position and then only later clamp it to the expected range.
## Validation Steps Performed
* Existing history tests ✅
* History cycling with F8 ✅
* Navigating history with F7 ✅
This change is a fairly subjective one. It was done because
`IsValidStringBuffer` will very soon be the only function left
in `cmdline.cpp`. Removing it allows removing `cmdline.cpp`.
While the code that replaces it is somewhat tricky, it's also much
more straightforward, as the `IsValidStringBuffer` function didn't
just check if the string buffer is valid - it also retrieved the
pointers to each of the strings contained in the buffer.
## Validation Steps Performed
Exhaustively covered by conhost feature tests ✅
This is a minor cleanup to deduplicate the two ReadConsole methods
and will help with making changes to how `COOKED_READ_DATA` is called.
It additionally changes the initial data payload from a `string_view`
to a `wstring_view` as it is guaranteed to be `wchar_t`.
This matches the current `COOKED_READ_DATA` implementation which
blindly assumes that the initial data consists of `wchar_t`.
Closes#5618
`COOKED_READ_DATA` is a little special and requires cursor navigation
based on the raw (buffered) text contents instead of what's in the
text buffer. This requires the introduction of new helper functions
to implement such cursor navigation. They're made part of `TextBuffer`
as these helpers will get support graphemes in the future.
It also helps keeping it close to `TextBuffer` as the cursor
navigation should optimally behave identical between the two.
Part of #8000.
Adds proper `type` for `SchemePair` definition to avoid warnings about matches of multiple schemas.
Same fix as https://github.com/microsoft/terminal/pull/4045
## Validation Steps Performed
- Pointed $schema to local file instead of https://aka.ms/terminal-profiles-schema
- Confirmed warning goes away when using a string
- Confirmed using the light/dark object format still passes validation
- Confirmed values like `"colorScheme": 3` no longer incorrectly pass validation whereas they would before
When the OS' "text size" setting gets set to 200% and the display
resolution is reduced quite a bit, we get some cropped text in the SUI's
Default Terminal ComboBox. Turns out, we have a height set on the items.
I went ahead and removed that so we don't crop the text. Everything
looks good still!
A similar issue occurs in the Profile > Appearance > Color Scheme
ComboBox. I went ahead and fixed that too by removing the height
restriction.
Other minor changes:
- fixed the comments
- changed "author and version" row to "auto" instead of "*" (star sizing
is great for proportional sizing, so we're not really taking advantage
of it)
Closes#15149
This pull request introduces the arm64 testing agents and a few build
phases to use them.
In addition to running the ARM64 tests in CI, it makes the following
changes:
- The x64 tests now run on equivalent x64 testing agents
- We now run ARM64 builds (and tests!) on all pull requests
- I've deduplicated a lot of the build and test stages
- New queue-time parameters have been added to control various phases,
for quick pipeline testing
- A bunch of conditions have been promoted to compile-time checks to
control the existence of stages and steps more tightly
Adds an `AutomationProperty.Name` to the main grid in the `SettingContainer`. Doing so makes it so that the group of elements is considered a "group \<header\>".
Now, when navigating with a screen reader, when you enter the group of elements, the "group \<header\>" will be presented. Thus, if the user navigates to the "reset" button, it'll be prefaced with a "group \<header\>" announcement first. If the user navigates to it from the other direction (the setting control), this announcement isn't made, but the user already has an understanding of what group of settings they're in, which is standard practice.
Closes#15158
Using our own pools like this gives us a lot of freedom in the tooling
that's installed, the OS versions it targets, and when we take on Visual
Studio updates.
As part of this effort, I've also stood up a "small" agent pool. At the
time of this PR, that pool is using D2ads-v5 SKU VMs (2 vcore 8 GiB)
versus the "large" agent pool's D8as-v5 (8 vcore 32 GiB). Smaller build
tasks have been moved over to the small pool. Compilation's the hard
part, so it gets to stay on the large pool.
`s_TraceApi` was a magic function in Tracing that logged a different
event based on what type it was called with. It was bad for two reasons:
1. I wanted to add a field to each trace indicating the originating
process and thread. This would have required adding a `CONSOLE_API_MSG`
parameter to _every instance_ of `s_TraceApi`, and even then it would
have not been particularly consistent.
2. The design of Tracing, where the TraceLogging macros are hidden
inside opaque functions, subverts the lightweight trace probe detection
present in `TraceLoggingWrite`. Every tracing probe turned into a call
to a cold function which, in 99% of cases, returned immediately.
To that end, I've introduced a new macro _only_ to ApiDispatchers that
emits a named probe with a set of preloaded information. It is a macro
to avoid any unnecessary branching or the emission of any explicit
tracing functions into the final binary.
I have also removed the generic handler for timing any/all API calls, as
we never used them and they were largely redundant with the information
we were capturing from API-specific reports.
I've also removed tracing from all APIs that do not mutate console
state. With the notable exception of ReadConsoleInput, we will see logs
only for things that change mutable console state.
All these things together allows us to construct a process+API-focused
timeline of console events, ala:
```
cmd.exe (20304) CookedRead pwsh 4 07/13/2023 22:02:53.751
cmd.exe (20304) API_GetConsoleMode True
cmd.exe (20304) API_SetConsoleMode False 0x00000003
cmd.exe (20304) API_SetConsoleMode True 0x000001F7
pwsh.exe (4032) ConsoleAttachDetach 07/13/2023 22:03:17.393 True True
pwsh.exe (4032) API_GetConsoleMode False
pwsh.exe (4032) API_GetConsoleMode False
pwsh.exe (4032) API_SetConsoleMode False 0x00000007
```
This pull request also switches the ConsoleAttachDetach and CookedRead
reports to use the PID and FILETIME markings for their pids and
filetimes. This is compatible with the uint32 and uint64 fields that
used to use those names, so anybody who was depending on them will
experience no change in functionality.
I also switched up their order to make them more ergonomic in WPA when
combined with the other API_ tracing (as viewed above.)
This PR adds support for **ITU's T.416 - ODA SGR (38/48)** colour
sequence, which makes use of colon instead of semi-colon as a parameter
separator.
- We use semi-colons as the only parameter separator while sending SGR
color sequences to a ConPTY client. This is to keep backward
compatibility.
- In response to `DECRQSS` query, we have decided to use colons, as the
major usecase for such queries are feature detection (whether client
supports ODA colours), and tracking the original separator may add too
much complexity to the codebase.
## Validation Steps Performed
- Made sure that we are always sending semi-colon separated parameters
regardless of whether the original sequence used colons.
- Made sure that we are always using colons as the parameter separator
in a `DECRQSS` response.
- Added new tests!
Closes#15706
Replace deprecated winrt::apartment_context pattern
I only found 2 instances of this pattern in use and one of them was
actually already replaced but the `co_await winrt::apartment_context`
code was still there.
Tested both window renaming and opening terminal with persisted layouts.
Both still work.
Closes#12982
## Summary of the Pull Request
> ## Abstract
>
> _"Shell integration" refers to a broad category of ways by which a
commandline
> shell can drive richer integration with the terminal. This spec in
particular is
> most concerned with "marks" and other semantic markup of the buffer._
>
> Marks are a new buffer-side feature that allow the commandline
application or
> user to add a bit of metadata to a range of text. This can be used for
marking a
> region of text as a prompt, marking a command as succeeded or failed,
quickly
> marking errors in the output. These marks can then be exposed to the
user as
> pips on the scrollbar, or as icons in the margins. Additionally, the
user can
> quickly scroll between different marks, to allow easy navigation
between
> important information in the buffer.
>
> Marks in the Windows Terminal are a combination of functionality from
a variety
> of different terminal emulators. "Marks" attmepts to unify these
different, but
> related pieces of functionality.
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec
<sub>\*</sub><sup>\*</sup>\*_
In all seriousness, I've already implemented a pile of this. This is
just putting the finishing touches of formalizing it.
## PR Checklist
- [x] This is a spec for #11000 and everything linked to that.
## Summary of the Pull Request
Add support for running profiles in the Add Tab drop down as
administrator without a keyboard.
## References and Relevant Issues
#14517
## Detailed Description of the Pull Request / Additional comments
This pull request adds a FlyoutMenu to each Profile entry in the Add New
tab drop down. When a profile is right clicked or held for 2 seconds in
the case of no mouse input will present a MenuItem to allow the user to
click and run the selected profile as administrator
## Validation Steps Performed
- Responds to pointer input events (mouse, pointer, touchpad)
- Adjusts to theme changes.
- Only shows when a profile is selected. Will not show on settings or
pallete entries
## PR Checklist
- [x] Closes#14517
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
This is my proposed solution to #15384.
Basically, the issue is that we cannot ever close a
`DesktopWindowXamlSource` ("DWXS"). If we do, then any other thread that
tries to access XAML metadata will explode, which happens frequently. A
DWXS is inextricably linked to an HWND. That means we have to not only
reuse DWXS's, but the HWNDs themselves. XAML also isn't agile, so we've
got to keep the `thread` that the DWXS was started on alive as well.
To do this, we're going to introduce the ability to "refrigerate" and
"reheat" window threads.
* A window thread is "**hot**" if it's actively got a window, and is
pumping window messages, and generally, is a normal thing.
* When a window is closed, we need to "**refrigerate**" it's
`WindowThread` and `IslandWindow`. `WindowEmperor` will take care of
tracking the threads that are refrigerated.
* When a new window is requested, the Emperor first try to
"**reheat**"/"**microwave**" a refrigerated thread. When a thread gets
reheated, we'll create a new AppHost (and `TerminalWindow`/`Page`), and
we'll use the _existing_ `IslandWindow` for that instance.
<sub>The metaphor is obviously ridiculous, but _you get it_ so who
cares.</sub>
In this way, we'll keep all the windows we've ever created around in
memory, for later reuse. This means that the leak goes from (~12MB x
number of windows closed) to (~12MB x maximum number of simultaneously
open Terminal windows). It's still not good.
We won't do this on Windows 11, because the bug that is the fundamental
premise of this issue is fixed already in the OS.
I'm not 100% confident in this yet.
* [x] There's still a d3d leak of some sort on exit in debug builds.
(maybe #15306 related)
* havent seen this in a while. Must have been a issue in an earlier
revision.
* [x] I need to validate more on Windows 11
* [x] **BAD**: Closing the last tab on Windows 11 doesn't close the
window
* [x] **BAD**: Closing a window on Windows 11 doesn't close the window -
it just closes the one tab item and keeps on choochin'
* [x] **BAD**: Close last tab, open new one, attempt to close window -
ALL windows go \*poof\*. Cause of course. No break into post-mortem
either.
* [x] more comments
* [ ] maybe a diagram
* [x] Restoring windows is at the wrong place entirely? I once reopened
the Terminal with two persisted windows, and it created one at 0,0
* [x] Remaining code TODO!s: 0 (?)
* [ ] "warm-reloading" `useTabsInTitlebar` (change while terminal is
running after closing a window, open a new one) REALLY doesn't work.
Obviously restores the last kind of window. Yike.
is all about #15384closes#15410 along the way. Might fork that fix off.
Resurrection of #9222.
Spec draft in #9365.
Consensus from community feedback is that the whole of that spec is
_nice to have_, but what REALLY matters is just broadcasting to all the
panes in a tab. So, in the interest of best serving our community, I'm
pushing this out as the initial implementation, before we figure out the
rest of design. Regardless of how we choose to implement the rest of the
features detailed in the spec, the UX for this part of the feature
remains the same.
This PR adds a new action: `toggleBroadcastInput`. Performing this
action starts broadcasting to all panes in this tab. Keystrokes in one
pane will be sent to all panes in the tab.
An icon in the tab is used to indicate when this mode is active.
Furthermore, the borders of all panes will be highlighted with
`SystemAccentColorDark2`/`SystemAccentColorLight2` (depending on the
theme), to indicate they're also active.
* [x] Closes#2634.
- (we should lick a reserved thread for follow-ups)
Co-authored-by: Don-Vito khvitaly@gmail.com
Move scroll marks to `TextBuffer`, so they can be cleared by
EraseInDisplay and EraseScrollback.
Also removes the namespacing on them.
## References and Relevant Issues
* see also #11000 and #15057
* Resize/Reflow _doesn't_ work yet and I'm not attempting this here.
## Validation Steps Performed
* `cls` works
* `Clear-Host` works
* `clear` works
* the "Clear buffer" action works
* They work when there's marks above the current viewport, and clear the
scrollback
* they work if you clear multiple "pages" of output, then scroll back to
where marks previously were
* resizing doesn't totally destroy the marks
Closes#15426
This commit fixes a number of issues around horizontal scrolling.
DxEngine only had one bug, where the clip rect would cause any content
outside of the actual viewport to be invisible. AtlasEngine had more
bugs, mostly around the conversion from textbuffer-relative coordinates
to viewport-relative coordinates, since AtlasEngine stores things like
the cursor position, attributes, etc., relative to the viewport.
It also renames `cellCount` to `viewportCellCount`, because I realized
that it might have to deal with a `textBufferCellCount` or similar in
the future. I hope that the new name is more descriptive of what it
refers to.
Future improvements to AtlasEngine in particular would be to not copy
the entire `Settings` struct every time the horizontal scroll offset
changes, and to trim trailing whitespace before shaping text.
This is in preparation for #1860
## Validation Steps Performed
* Patch `RenderingTests` to run in the main (and not alt) buffer
* Horizontal scrolling of line renditions and attributes works ✅
* Selection retains its position (mostly) ✅
Adds support for colon `:` separated sub parameters in parser.
Technically, after this PR, nothing should change except, now sub
parameters are parsed, stored safely and we don't invalidate the whole
sequence when a `:` is received within a parameter substring.
In this PR:
- If sub parameters are detected with a parameter, but the usage is
unrecognised, we simply *skip* the parameter in `adaptDispatch`.
- A separate store for sub parameters is used to avoid too many changes
to the codebase.
- We currently allow up to `6` sub parameters for each parameter, extra
sub parameters are *ignored*.
- Introduced `VTSubParameters` for easy access to underlying sub
parameters.
> **Info**: We don't use sub parameters for any feature yet, this is
just the core implementation to support newer usecases.
## Validation Steps Performed
- [x] Use of sub parameters must not have any effect on the output.
- [x] Skip parameters with unexpected set of sub parameters.
- [x] Skip sequences with unexpected set of sub parameters.
References #4321
References #7228
References #15599
References https://github.com/xtermjs/xterm.js/pull/2751Closes#4321
This commit inlines `EventsToUnicode` into `WriteConsoleInputAImpl`
because soon we'll not use deques for events anymore and so the old
code won't work. It cleans up the implementation because I intend to
move all this code directly into `InputBuffer` to have a better and
tighter control over how text gets converted. UTF-8 input for instance
requires the storage of up to 3 input events and this code is not fit
to handle that. It's also unmaintainable because our input handling
code shouldn't be spread over a dozen files either. 😄
## Validation Steps Performed
* Unit and feature tests are ✅
Adds a note to the ReadMe's installation instructions which describes
why current versions of Terminal are unavailable via winget.
## PR Checklist
- [x] Closes#15663
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
## Summary of the Pull Request
Fix C2664 errors under latest compiler.
## References and Relevant Issues
#15309
## Detailed Description of the Pull Request / Additional comments
- Latest compilers are more strict
- Internal background of change:
[DevDiv:1810844](https://devdiv.visualstudio.com/DevDiv/_workitems/edit/1810844)
## Validation Steps Performed
- Now successfully builds under VS `17.8.0 Preview 1.0 `
- Still successfully builds under VS `17.6.5`
## PR Checklist
- [x] Closes#15309
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
---------
Co-authored-by: Dan Albrecht <danalb@ntdev.microsoft.com>
I wrote this tool to help me test the buffer reflow code in Windows
Terminal. It needs to stay in sync with the buffer contents in ConPTY
which is somewhat tricky to achieve. This tool will make this easier
because it allows me to quickly, visually compare the contents.
This reverts a number of changes to input handling to how it used to be
in conhost v1. It merges the input event coalescing logic into a single
function and inlines the console suspension event handling, because
soon these functions will receive `std::span` arguments which cannot
be preprocessed anymore, unlike a `std::deque`.
It also adds back support for Ctrl-S being an alias for VK_PAUSE
which was lost in commit fccc7410 in 2018.
Closes#809
## Validation Steps Performed
* Unit and feature tests are ✅
* Ctrl-S pauses output 🎉
The DWMWA for this has been documented for quite a while now!
I've also updated to a version of TerminalThemeHelpers that removes all the Dark Theme exports.
Add prIssueManagement.yml to onboard repo to GitOps.ResourceManagement
as FabricBot replacement
---------
Co-authored-by: microsoft-github-policy-service[bot] <77245923+microsoft-github-policy-service[bot]@users.noreply.github.com>
## Summary of the Pull Request
Adds a dismiss selection option to the "copy" action.
## PR Checklist
- [x] Closes#15371
- [x] Tests added/passed
- [x] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here:
MicrosoftDocs/terminal#686
- [x] Schema updated (if necessary)
---------
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Performance of printing enwik8.txt at the following block sizes:
4KiB (printf): 78MB/s -> 93MB/s
128KiB (cat): 117MB/s -> 156MB/s
The change itself is rather self-explanatory.
A tighter, simpler loop runs faster.
## Validation Steps Performed
Mixed ASCII/Unicode text output looks generally correct. ✅
This is a complete rewrite of the old `WriteCharsLegacy` function
which is used when VT mode is disabled as well as for all interactive
console input handling on Windows. The previous code was almost
horrifying in some aspects as it first wrote the incoming text into a
local buffer, stripping/replacing any control characters. That's not
particular fast and never was. It's unknown why it was like that.
It also measured the width of each glyph to correctly determine the
cursor position and line wrapping. Presumably this used to work quite
well in the original console code, because it would then just copy
that local buffer into the destination text buffer, but with the
introduction of the broken and extremely slow `OutputCellIterator`
abstraction this would end up measuring all text twice and cause
disagreements between `WriteCharsLegacy`'s idea of the cursor position
and `OutputCellIterator`'s cursor position. Emoji input was basically
entirely broken. This PR fixes it by passing any incoming text
straight to the `TextBuffer` as well as by using its cursor positioning
facilities to correctly implement wrapping and backspace handling.
Backspacing over Emojis and an array of other aspects still don't work
correctly thanks to cmdline.cpp, but it works quite a lot better now.
Related to #8000Closes#8839Closes#10808
## Validation Steps Performed
* Printing various Unicode text ✅
* On an fgets() input line
* Typing text works ✅
* Inserting text works anywhere ✅
* Ctrl+X is translated to ^X ✅
* Null is translated to ^@ ✅
This was tested by hardcoding the `OutputMode` to 3 instead of 7.
* Backspace only advances to start of the input ✅
* Backspace deletes the entire preceding tab ✅
* Backspace doesn't delete whitespace preceding a tab ✅
* Backspacing a force-wrapped wide glyph unwraps the line break ✅
* Backspacing ^X deletes both glyphs ✅
* Backspacing a force-wrapped tab deletes trailing whitespace ✅
* When executing
```cpp
fputs("foo: ", stdout);
fgets(buffer, stdin);
```
pressing tab and then backspace does not delete the whitespace
that follows after the "foo:" string (= `sOriginalXPosition`).
`TerminalInput` is configurable, but almost entirely state-less.
As such it isn't helpful that it emits its output via a callback.
It makes tracing the flow of data harder purely from reading the code
and also raises uncertainty about when `TerminalInput` may generate
output. This commit makes it more robust by having `TerminalInput`
simply return its data. Furthermore, it returns that data as a string
instead of converting back and forth between text and `IInputEvent`.
This change will help me make conhost's `InputBuffer` implementation
leaner and help me confidently make more difficult changes to it
with the goal to improve our Unicode support/correctness.
## Validation Steps Performed
* Windows Terminal produces correct results with `showkey -a` ✅
The WPF control has a minor bug where it initializes the renderer
when there isn't even a window yet. When it then calls `SetWindowSize`
it'll pass the result of `GetWindowRect` which is `0,0,0,0`.
This made AtlasEngine unhappy because it restricted the glyph atlas
size to some multiple of the window size. If the window size is `0,0`
then there couldn't be a glyph atlas and so it crashed.
## Validation Steps Performed
* Fixes WPF test control crash on startup ✅
benchcat, "bc" for short, is a tool that I've written over the last
two years to help me benchmark OpenConsole and Windows Terminal.
Initially it only measured the time it took to print a file as fast as
possible, but it's grown to support a number of arguments, including
chunk (`WriteFile` call) sizes, repeat counts and VT mode with italic
and colorized output. In the future I also wish to add a way to
generate the output data on the fly via command line arguments.
One unusual trait of benchcat is that it is compiled entirely without
CRT and vcruntime. I did this so that I could test it on Windows XP.
Also, it's kind of funny seeing how it's only about 11kB.
This commit also fixes a couple `$LASTEXITCODE` cases, because our
spellchecker was bothering me a lot with this PR and so I just fixed it.
The added explicit vectorization allows us to skip plain text faster
and pass it immediately to the deeper `TextBuffer` parts.
Performance of printing enwik8.txt at the following block sizes:
4KiB (printf): 54MB/s -> 58MB/s
128KiB (cat): 103MB/s -> 116MB/s
## Validation Steps Performed
* Works on x64 ✅
* Works on ARM ✅
This fixes a bug reported internally that occurs when resizing the
terminal while also scolling the contents. The easiest way to reproduce
it is to resize the terminal to 0 rows, but it's much more prominent
in a debug build where everything goes out of sync almost immediately.
The underlying issue is that `VtEngine::_wrappedRow` may contain an
offset that is outside of the viewport bounds, because reflowing and
scrolling aren't properly synchronized. The previous `bitmap` code
would then throw an exception for such invalid coordinates and cause
the internal `VtEngine` state to be broken. Once `_wrappedRow` got
to a negative value at least once, it would stay that way unless you're
scrolling up. If the contents are actively scrolling it would quickly
reach a negative value from which it can never recover. At that point
OpenConsole would enter a tight exception-throw-catch-retry loop
and Windows Terminal seemingly cease to show any content.
## Validation Steps Performed
* Resize WT to the minimal window size repeatedly
* Doesn't hang ✅
When we moved the settings UI to lazy initialization in #15628, we broke
PGO. Apparently, we were PGOing the tiny part of Settings that was being
loaded on every launch (e.g. the XAML metadata provider 🤦)
Let's actually PGO launching the settings.
This commit removes some flags that we don't need anymore, and adds all
those `/Zc` (standard conformance) switches that aren't enabled by
default yet. This will help us and the MSVC team detect bugs early.
This removes:
* `/fp:contract`: With the addition of `TIL_FAST_MATH_BEGIN`
all the code that benefits from FMA now uses `/fp:fast`.
* `/Zc:lambda`: Automatically enabled with C++20.
This adds:
* `/Zc:__cplusplus` / `/Zc:__STDC__`: Without these `__cplusplus`
defaults to `199711L` and `__STDC__` remains undefined.
* `/Zc:enumTypes`: The C++ standard specifies that an enum with
unspecifies size has a size that fits its members exactly.
An enum with byte-sized members has a `sizeof` of 1 and not 4.
* `/Zc:templateScope`: Emit errors when shadowing template parameters.
And most importantly:
* `<RemoveUnreferencedCodeData>`, which is `/Zc:inline`
Without this, MSVC treats `inline` functions sort of like external
linkage ones. You can declare an inline function in one file and
then just define it in another. Or use an inline function from
another file. With this flag, the compiler can stop emitting
COMDAT references for these which reduces object file sizes.
Due to an implementation detail in the Xaml compiler--which wants to
ensure that all metadata providers on an App are available
immediately--we were eagerly loading the settings UI DLL and all of its
dependencies, even in sessions where the user was not going to open
Settings.
By turning off eager provider generation and handling it ourselves, we
get to control exactly when the settings UI is loaded.
This required some gentle poking-through of the barrier between App and
Page, but it is almost certainly worth it.
Turning on the Xaml code generation flag to not generate providers
automatically adds an `AddProvider` member to the internal interface for
the autogenerated XamlMetadataProvider. We needed to switch to using the
internal interface rather than the projected type in our custom App base
class to get at it.
Providers that App/Page use must be initialized by the time we start the
WindowsXamlManager, so we load Control and Controls (ha) eagerly and
early.
It looks like it may save 400ms of CPU time (?) on startup.
This commit reduces GdiEngine's average display latency by 8ms,
which caused it to miss a v-blank about half the time at 60Hz.
Closes#15607
## Validation Steps Performed
Input latency with `frarees/typometer` matches conhost from Win10 ✅
UiaRaiseNotificationEvent is not present on Windows Server 2016, even
though it is documented as being present.
This also removes the cost of loading up UIAutomationCore from the
critical path.
This is an improved fix for #13238. Instead of handling focus events in
the `TerminalInput::HandleKey` function and the need to filter them
out depending on where they came from, we simply don't call `HandleKey`
in the first place. This makes the somewhat unreliable `CameFromApi`
function unnecessary and the code a bit more robust.
This change is required because `CameFromApi` is not representable
in a `INPUT_RECORD` and I'm getting rid of `IInputEvent`.
## Validation Steps Performed
* No `[O` when exiting nvim ✅
* Mouse input in nvim works ✅
`(Peek|Read)ConsoleInput(A|W)Impl` make a distinction that doesn't make
a lot of sense in our code base: On the calling side (`ApiDispatchers`)
there's just one function calling all 4 (`ServerGetConsoleInput`) and
on the callee side they all 4 just call `_DoGetConsoleInput` anyways.
## Validation Steps Performed
* It compiles ✅
I've removed these because it made some of my new code pretty
convoluted for now good reason as most of these functions aren't
exception safe to begin with. Basically, their boolean status
is often just a pretense because they can crash or throw anyways.
Furthermore, `WriteCharsLegacy` failed to check the status code
returned by `AdjustCursorPosition` in some of its parts too.
In the future we should instead probably strive to continue
make our legacy code more exception safe.
By rewriting the first major copy loop in `CopyRangeFrom` to use
pointers/iterators instead of indices for iteration, the autovectorizer
kicks in end neatly rewrites it as an unrolled SIMD loop. This improves
performance during traditional window resizes by roughly 2x and will
be quite helpful in the future for our more complex reflow resize.
Unfortunately, MSVC unrolls the loop by 4x which is too much for our
purpose, but there's no option to change that. It's still better than
not having any vectorization however, since it kicks in at 32 columns.
It also renames the function to `CopyTextFrom` be more in line with
the others and to avoid confusion, because it doesn't copy attributes.
## Validation Steps Performed
* Traditional resizing works ✅
I originally intended to add the Drop Validator (which is a compliance
requirement) task to the build, but I quickly realized that we weren't
generating a complete SBOM manifest covering every artifact that we
produced.
We were generating the SBOM manifest, and then re-packing the Terminal
app which very likely invalidated all of the hashes and signatures in
the SBOM manifest!
We were also missing the unpackaged build.
I've removed the `appx-PLATFORM-CONFIG` and `unpackaged-PLAT-CONF`
artifacts and combined them into a single one, `terminal-PLAT-CONF`.
As a shortcut, GetLastNonSpaceCharacter can start with the last
committed row. It's guaranteed that there isn't anything of worth below
that point, so why bother checking?
Without this, Terminal immediately commits the entire 9031-line buffer
on startup while trying to--get this!--clear the screen!
---------
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
This PR adds a `searchWeb` command to search the selected text on the web.
Arguments:
- `queryUrl`: URL of the web page to launch (the selected text will be
inserted where the first `%s` is found in the query string)
To make the search text more "compact" and handle multi-line selections,
I'm concatenating the selected lines and replacing consecutive
whitespaces with a single space (we may change this with something more
clever in case).
## Validation Steps Performed
Manual testing with single, multi-line, block selections.
Closes#10175
---------
Co-authored-by: Marco Pelagatti <marco.pelagatti@iongroup.com>
Co-authored-by: Mike Griese <migrie@microsoft.com>
Don't exclude nuget `packages/` in vscode. Excluding via `file.exclude`
also excludes them from c++ language extension's `includePath` and
generates missing include files and header errors.
We might still like to exclude them from full text search, so we do it
using `search.exclude`.
Closes#15578
Performance of printing enwik8.txt at the following block sizes:
4KiB (printf): 54MB/s -> 54MB/s
128KiB (cat): 101MB/s -> 104MB/s
## Validation Steps Performed
This change is easily verifiable via review.
Performance of printing enwik8.txt at the following block sizes:
4KiB (printf): 51MB/s -> 54MB/s
128KiB (cat): 92MB/s -> 103MB/s
## Validation Steps Performed
* Rows are properly filled with whitespace at various
window sizes as observed under a debugger ✅
When `elevate` is set to `true`, `_maybeElevate` would try to
modify `newTerminalArgs` and crash, because during tab duplication
there aren't any `newTerminalArgs`. This issue may happen for instance
when receiving hand-off from a non-elevated client and then trying
to duplicate that tab.
Closes#15534
## Validation Steps Performed
* Launch with `"elevate": false`
* Set `"elevate": true`
* Duplicate a tab
* Doesn't crash ✅
* Fixes warnings related to missing `const` in 2 places, which seems
to be something that's being detected more reliably by 17.6 now.
* Fixes `DxSoftFont` not initializing all members,
which is also suddenly being detected by 17.6 now.
* Fixes 1 new VS 17.7 warning (C26435) by removing `virtual` from
methods declared as `override` already.
* Disables 2 new VS 17.7 warnings that are part of C++ Core Guidelines
c.128, because they don't really bring any benefit to this project.
As an additional bonus it disables a spellcheck warning that has been
going around ever since I put a Punycode URL in a comment.
This commit makes 2 changes:
* Expose dirty-range information from `ROW::CopyTextFrom`
This will allow us to call `TriggerRedraw`, which is an aspect
I haven't previously considered as something this API needs.
* Add a `FillRect` API to `TextBuffer` and refactor `AdeptDispatch`
to use that API. Even if we determine that the new text APIs are
unfit (for instance too difficult to use), this will make it simpler
to write efficient implementations right inside `TextBuffer`.
Since the new `FillRect` API lacks bounds checks the way `WriteLine`
has them, it breaks `AdaptDispatch::_EraseAll` which failed to adjust
the bottom parameter after scrolling the contents. This would result
in more rows being erased than intended.
## Validation Steps Performed
* `chcp 65001`
* Launch `pwsh`
* ``"`e[29483`$x"`` fills the viewport with cats ✅
* `ResizeTraditional` still doesn't work any worse than it used to ✅
Fixes the broken types for `TextAttribute`, `til::size`, `til::point`
and `til::rect` and adds a new type for `TextBuffer` which without
this would now be much harder to inspect due to introduction of
the manual virtual memory management in 612b00c.
For a 120x9001 terminal, a01500f reduced the private working set of
conhost by roughly 0.7MB, presumably due to tighter `ROW` packing, but
also increased it by 2.1MB due to the addition of the `_charOffsets`
array on each `ROW` instance. An option to fix this would be to only
allocate a `_charOffsets` if the first wide or complex Unicode glyph
is encountered. But on one hand this would be quite western-centric
and unfairly hurt most languages that exist and on another we can get
rid of the `_charOffsets` array entirely in the future by injecting
ZWNJs if a write begins with a combining glyph and just recount each
row from the start. That's still faster than fragmented memory.
This commit goes a different way and instead reduces the working
set of conhost after it launches from 7MB down to just 2MB,
by only committing ROWs when they're first used.
Finally, it adds a "scratchpad" row which can be used to build
more complex contents, for instance to horizontally scroll them.
## Validation Steps Performed
* Traditional resize
* Horizontal shrinking works ✅
* Vertical shrinking works ✅ and cursor stays in the viewport ✅
* Reflow works ✅
* Filling the buffer with ASCII works ✅ and no leaks ✅
* Filling the buffer with complex Unicode works ✅ and no leaks ✅
* `^[[3J` erases scrollback ✅
* Test `ScrollRows` with a positive delta ✅
* I don't know how to test `Reset`. ❔ Unit tests use it though
Improvements and explanations:
* Added proper indentation and spacing for better readability.
* Added comments to explain the purpose of different sections of the
code.
* Utilized the $LASTEXITCODE variable instead of $lastexitcode to ensure
consistency.
* Changed the variable name from $testdlls to $testDlls for better
naming convention.
* Moved the Exit 0 statement to the end (outside the if condition).
* Since Exit statements terminate the script immediately, it's better to
have them at the end of the script to ensure that all necessary
cleanup or additional operations are performed before exiting.
* These improvements enhance the code's readability, maintainability,
and adherence to best practices.
When we detect a font that has a glyph for `U+E0B6`, we will switch the
preview connection text to contain a special powerline prompt. This will
allow people to see how different settings might impact their real-world
environment.
When we _don't_ detect such support, we fall back to the CMD-style
`C:\>` prompt.
Pros:
- It's beautiful.
Cons:
- More code
Risks:
- `U+E0B6` is part of the private use area, and fonts that have symbols
there (such as Cirth as sub-allocated by the ConScript Unicode Registry)
will result in something unexpected.
- Actually, `E0B6` isn't part of base powerline... but I think this
specific set of characters looks too good to pass up.
This commit achieves fixes the issue as described in the title by
checking whether the `this` and `other` pointer are identical.
As an added bonus it makes the copy and move constructors slightly
cheaper, as they don't try to destruct existing data anymore,
which doesn't exist anyways.
## Validation Steps Performed
* It blends ✅
The _Erase Color Mode_ determines what attributes are written to the
buffer when erasing content, or when new content is scrolled onto the
screen. When the mode is reset (which is the default), we erase with the
active colors, but with rendition attributes cleared. When the mode is
set, we erase with the default attributes, i.e. with neither color nor
rendition attributes applied.
This could be used to address the problem described in issue #10556.
Most of the affected operations are handled within the `AdaptDispatch`
class, so I've simply updated them all to use a new helper method which
returns the appropriate erase attributes for the active mode.
However, there were a couple of operations that are handled elsewhere,
and which now require the erase attributes to be passed to them as a
parameter.
* The `TextBuffer::IncrementCircularBuffer` method, which is used to
recycle the topmost row when scrolling past the bottom of the buffer.
* The `TextBuffer::SetCurrentLineRendition` method, which has to clear
the second half of the line when switching to a double width rendition.
* The `ITerminalApi::UseAlternateScreenBuffer` method, which has to
clear the screen when switching to the alternate buffer.
Then there is also a Clear Buffer action in Windows Terminal, which is
ultimately handled by the `SCREEN_INFORMATION::ClearBuffer` method in
ConHost. That class has no access to the erase color mode, so has no way
of knowing which attributes to use. So I've now rewritten it to use the
`AdaptDispatch::EraseInDisplay` method to handle the erasing.
## Validation Steps Performed
I wrote a little test script that exercises the operations affected by
`DECECM`, which @al20878 kindly tested for us on a real DEC VT525, and
provided screenshots of the output. I've manually confirmed that our
implementation exactly matches those results.
I've also added a unit test that runs through the same set of operations
and verified that each of them is using the appropriate attributes when
`DECECM` is enabled and enabled.
Closes#14983
06174a9 didn't properly fix the issue of us showing homoglyphs in our
URI tooltip. This commit introduces a different approach where we
display both, the Punycode and Unicode encoding, whenever we encounter
an IDN. This isn't perfect but simple to implement.
Closes#15432
## Validation Steps Performed
* `https://www.xn--fcbook-3nf5b.com/` (which contains confusing glyphs)
is shown both in its Punycode and Unicode form simultaneously. ✅
---------
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
## Summary of the Pull Request
Fixing a problem where the repo build failed when the project location
path contained space character.
## References and Relevant Issues
Closes#15370
## Detailed Description of the Pull Request / Additional comments
Placing missing quote, amp and apos symbols when calling commands with
filepath parameters.
## Validation Steps Performed
Built locally.
## PR Checklist
- [x] Closes #xxx
- [x] Tests added/passed
- [x] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [x] Schema updated (if necessary)
This fixes a couple spots where I wasn't properly checking
for the existence of some optional D2D interfaces.
## Validation Steps Performed
I haven't tested this and don't intend to do it just yet.
Windows Terminal requires build 19041 at least anyways.
## Summary of the Pull Request
This removes the "default" text box from the UI Automation tree, thus
preventing screen readers from navigating to it. This was a confusing
scenario for users because the "default" tag was unclear if it was a
part of the previous or next color scheme (i.e. consider hearing
"Campbell, default, Campbell PowerShell"; it's unclear which one is
default).
This also appends the "default" string to the `ToString` function of the
color scheme view model. This makes it so that the combo box and list
view visually appear the same, but can be quick searched or read out by
the screen reader with the 'default' tag.
## Validation Steps Performed
- [x] Verified this works on Windows 11
- [x] Verified this works on Windows 10
- Scenarios tested:
- [x] saving settings after changing the default scheme
- [x] saving settings.json to force a refresh in SUI
Closes#14401
This removes the telemetry tracking which counted how many times each VT
sequence was executed, and how many times there were "failures". This
information isn't needed any more, and we were reaching the limit of how
many sequences we could track anyway.
Essentially what's been removed is the `TermTelemetry` class, but we are
still tracking some statemachine telemetry in the `ParserTracing` class.
And since that used the same trace logging provider as `TermTelemetry`,
I've now moved that definition into the `tracing.cpp` file.
The code still compiles and runs without exploding.
Closes#15482
When an `RIS` (hard reset) sequence is executed, ConHost will pass that
through to the connected conpty terminal, which results in all modes
being reset to their initial state. To work best, though, conpty needs
to have the win32 input mode enabled, as well as the focus event mode.
This PR addresses that by explicitly requesting the required modes after
an `RIS` is passed through.
Originally these modes were only set if the `--win32input` option was
given, but there is really no need for that, since terminals that don't
support them should simply ignore the request. To avoid that additional
complication, I've now removed the option (i.e. ConHost will now always
attempt to set the modes it needs).
I've manually confirmed that keypresses are still passed through with
win32 input sequences after a hard reset, and that focus events are
still being generated. I've also updated the existing conpty round-trip
test for `RIS` to confirm that it's now also passing through the mode
requests that it needs.
Closes#15461
I wanted to show `til::static_map` to someone and noticed it hasn't been
updated since we updated to C++20. We can now make use of `constexpr`
`std::sort` and `constinit` to skip the initialization of the maps in
`KeyChordSerialization.cpp`. Also, I removed the comparator argument
to make the map a little more compact.
This regressed in a1f42e8 which only made changes to Windows Terminal
but forgot to make equivalent ones in OpenConsole/conhost.
Without this fix, line breaks in block selections are missing if the
line doesn't force a wrap via an explicit newline.
Closes#15153
## Validation Steps Performed
* Run Far or print long lines of text
* Trigger block selection via Ctrl+M or Edit > Mark
* Clipboard contains N-1 newlines lines for N selected rows ✅
RE:
* #15454
* MSFT:44725712 "WindowsTerminal.exe!NonClientIslandWindow::OnSize"
* MSFT:44754014 "NonClientIslandWindow::GetTotalNonClientExclusiveSize"
I think this should fix all of those, but I want to ship and verify
live, since I can't repro this locally.
`_p.MarkAllAsDirty()` sets `_p.scrollOffset` to 0, so we need to use
that instead of `_api.scrollOffset` when getting the offset.
Additionally, the previous code failed to release the swap chain
when recreating the backend, which is technically not correct.
I'm not sure to what issues this might have led, as it didn't had any
negative effects on my PC, but it's definitely not according to spec.
## Validation Steps Performed
Difficult to test but it seems alright.
Make sure we always expand path env vars, even if they're REG_SZ in the
registry.
## Detailed Description of the Pull Request / Additional comments
On some systems path vars are REG_SZ instead of REG_EXPAND_SZ. We need
to make sure we always expand them. We looked at the system code, and it
also makes to sure to always expand them.
## Validation Steps Performed
Built locally and made sure the problem went away. Also stepped through
in the debugger to make sure things were working correctly.
Closes#15442
This is a resurrection of #5629. As it so happens, this crash-on-exit
was _not_ specific to my laptop. It's a bug in the XAML platform
somewhere, only on Windows 10.
In #14843, we moved this leak into `becomeMonarch`. Turns out, we don't
just need this leak for the monarch process, but for all of them.
It's not a real "leak", because ultimately, our `App` lives for the
entire lifetime of our process, and then gets cleaned up when we do. But
`dtor`ing the `App` - that's apparently a no-no.
Was originally in #15424, but I'm pulling it out for a super-hotfix
release.
Closes#15410
MSFT:35761869 looks like it was closed as no repro many moons ago. This
should close out our hits there (firmly **40% of the crashes we've
gotten on 1.18**)
This PR introduces four new escapes sequences: `DECIC` (Insert Column),
`DECDC` (Delete Column), `DECBI` (Back Index), and `DECFI` (Forward
Index), which allow for horizontal scrolling within a margin area.
## References and Relevant Issues
This follows on from the horizontal margins PR #15084 to complete the
requirements for the horizontal scrolling extension.
## Detailed Description of the Pull Request / Additional comments
The implementation is fairly straightforward, since they're all built on
top of the existing `_ScrollRectHorizontally` method.
## Validation Steps Performed
Thanks to @al20878, these operations have been extensively tested on a
number of DEC terminals and I've manually confirmed our implementation
matches their behavior.
I've also added a unit tests that covers the basic execution of each of
the operations.
Closes#15109
Because this looks like it's entirely broken in `main`, and possibly in
1.17(?)
We didn't take a strong ref to the coroutine parameter. As to be
expected, that explodes.
Closes#15412
TIL: `CreateCompatibleRenderTarget` does not initialize the bitmap
it returns. You got to do that yourself just like in D3D.
## Validation Steps Performed
* Set `ATLAS_DEBUG_FORCE_D2D_MODE` to 1
* Changing the cursor in the settings immediately updates it ✅
This regressed in f06cd17. It seems like the change went untested,
because it appends an extra " after -startdir=none.
This changeset also avoids calling `append()` twice.
Closes#15436
## Validation Steps Performed
* VS Developer Command Prompt works ✅
`til::rect`'s truthiness check (= rect is valid) returns `false` for
any rects that have negative coordinates. This makes sense for buffer
handling, but breaks AtlasEngine, where glyph coordinates can go out
of bounds and it's entirely valid for that to happen.
Closes#15416
## Validation Steps Performed
* Use MesloLGM NF and print NF glyphs in the first row
* Text rendering, selection, etc., still works ✅
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Re: #15384
Basically, when we close a `DesktopWindowXamlSource`, it calls to `Windows_UI_Xaml!DirectUI::MetadataAPI::Reset`, which resets the XAML metadata provider _for the process_. So, closing one DWXS on one thread will force an A/V next time another thread tries to do something like... display a tooltip. Not immediately, but surely soon enough.
This was fixed in Windows 11 by os.2020!5837001. That wasn't backported to Windows 10.
This will cause a ~15MB memory leak PER WINDOW. OBVIOUSLY, this is bad, but it's less bad than crashing.
We're gonna keep using #15384 for other ideas here too.
As discussed. Closes#15364.
Prevents one crash on Windows 10. Opens the door to may more horrors.
Co-authored-by: James Holderness <j4_james@hotmail.com>
It turns out that the store API *doesn't* tell us what the new version
is. We were loading up our own package and checking its version instead.
The best we can do is tell users that an update--any update--is
available.
Our existing preview text was not very helpful in learning how different
settings impacted the display of text in Terminal.
This new preview text contains:
* Bold text, which is controlled by intenseTextStyle
* Colors
* Emoji
* A cursor, which overlaps a single character to show inversion behavior
Some of these were reundant, and some didn't feel right when I read
them.
Oh, and I got rid of all of these particularly unhelpful or non-additive
resources:
```
Color Scheme [ v ]
Is a color scheme
```
This PR introduces two new escapes sequences: `DECLRMM` (Left Right
Margin Mode), which enables the horizontal margin support, and `DECSLRM`
(Set Left and Right Margins), which does exactly what the name suggests.
A whole lot of existing operations have then been updated to take those
horizontal margins into account.
## Detailed Description of the Pull Request / Additional comments
The main complication was in figuring out in what way each operation is
affected, since there's a fair amount of variation.
* When writing text to the buffer, we need to wrap within the horizontal
margins, but only when the cursor is also within the vertical margins,
otherwise we just wrap within the boundaries of the screen.
* Not all cursor movement operations are constrained by the margins, but
for those that are, we clamp within both the vertical and horizontal
margins. But if the cursor is already outside the margins, it is just
clamped at the edges of the screen.
* The `ICH` and `DCH` operations are constrained by the horizontal
margins, but only when inside the vertical margins. And if the cursor is
outside the horizontal margins, these operations have no effect at all.
* The rectangular area operations are clamped within the horizontal
margins when in the origin mode, the same way they're clamped within the
vertical margins.
* The scrolling operations only scroll the area inside both horizontal
and vertical margins. This includes the `IL` and `DL` operations, but
they also won't have any effect at all unless the cursor is already
inside the margin area.
* `CR` returns to the left margin rather than the start of the line,
unless the cursor is already left of that margin, or outside the
vertical margins.
* `LF`, `VT`, `FF`, and `IND` only trigger a scroll at the bottom margin
if the cursor is already inside both vertical and horizontal margins.
The same rules apply to `RI` when triggering a scroll at the top margin.
Another thing worth noting is the change to the `ANSISYSSC` operation.
Since that shares the same escape sequence as `DECSLRM`, they can't both
be active at the same time. However, the latter is only meant to be
active when `DECLRMM` is set, so by default `ANSISYSC` will still work,
but it'll no longer apply once the `DECLRMM` mode is enabled.
## Validation Steps Performed
Thanks to @al20878, these operations have been extensively tested on a
number of DEC terminals and I've manually confirmed our implementation
matches their behavior.
I've also extended some of our existing unit tests to cover at least the
basic margin handling, although not all of the edge cases.
Closes#14876
Overhangs for box glyphs can produce unsightly effects, where the
antialiased edges of horizontal and vertical lines overlap between
neighboring glyphs and produce "boldened" intersections.
This avoids the issue in most cases by simply clipping the glyph to the
size of a single cell. The downside is that it fails to work well for
custom line heights, etc.
## Validation Steps Performed
* With Cascadia Code, printing ``"`u{2593}`n`u{2593}"`` in pwsh
doesn't produce a brightened overlap anymore ✅
* ``"`e#3`u{2502}`n`e#4`u{2502}"`` produces a fat vertical line ✅
_targets #15280_
When ctrl+clicking on a profile, pre-evaluate the starting directory of
that profile, and stash that in the commandline we pass to elevate shim.
So in the case of something like "use parent process directory", we'll
run `elevate-shim new-tab -p {guid} -d "C:\\the path\\of\\terminal\\."`
Closes#15173
---------
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
`TermControl` cannot change the text rendering engine after its
construction. Fix the issue by deferring the construction until
after we got the initial profile settings.
## Validation Steps Performed
* A line height of 0.5 shows up with overlapping rows ✅
We need to avoid calling `Present1()` with an empty dirty rect, but the
backends are what determines the resulting dirty rect, so we need to
first run the backend code and then decide if we `Present1()` or not.
## Validation Steps Performed
* `Animate_scan.hlsl` shows a smoothly animated line ✅
This commit ensures that we pass the user's locale to `MapCharacters`.
## Validation Steps Performed
See: https://heistak.github.io/your-code-displays-japanese-wrong/
After modifying the `userLocaleName` to contain `ja-JP`, `zh-CN` and
`zh-TW`, printing "刃直海角骨入" produces the expected, localized result.
This commit fixes 3 bugs that I found while working on another feature:
* `GetGlyphIndices` doesn't return an error when the codepoint couldn't
be found, it simply returns a glyph index of 0.
* `_resetGlyphAtlas` failed to reset the `linear_flat_set` "load" to 0
which would result in an unbounded memory growth over time.
* `linear_flat_set` was missing move constructors/operators, which
would've led to crashes, etc., but thankfully we haven't made use
of these operators yet. But better fix it now than never.
XAML/WinUI may pump the event loop internally. One of the functions
that does this right now is `DesktopWindowXamlSource::Close()`.
This is problematic in the previous code, because we'd set `_window`
to `nullptr` before calling `Close()` and so any of the `IslandWindow`
callbacks may be invoked during shutdown, which then try to potentially
access `_window` and end up crashing. This commit fixes the issue by
simply not nulling out the `_window` and calling `Close()` directly.
Furthermore, `NonClientIslandWindow` may directly access WinUI
objects in its message handlers which also crashes.
I've had this happen roughly ~1% of my test exits in a debug build
and every single time on a (artificial) very slow CPU.
## Validation Steps Performed
* Closing a window destroys the rendering instance ✅
This PR adds support for the ANSI Line Feed/New Line mode (`LNM`), which
determines whether outputting a linefeed control should also trigger a
carriage return, and whether the `Return` key should generate an `LF` in
addition to `CR`.
## Detailed Description of the Pull Request / Additional comments
In ConHost, there was already a console mode which handled the output
side of things, but I've now also added a `TerminalInput` mode that
controls the behavior of the `Return` key. When `LNM` is set, both the
output and input modes are enabled, and when reset, they're disabled.
If they're not already matching, then `LNM` has no effect, and will be
reported as unknown when queried. This is the typical state for legacy
console applications, which expect a linefeed to trigger a carriage
return, but wouldn't want the `Return` key generating both `CR`+`LF`.
As part of this PR, I've also refactored the `ITerminalApi` interface to
consolidate what I'm now calling the "system" modes: bracketed paste,
auto wrap, and the new line feed mode. This closes another gap between
Terminal and ConHost, so both auto wrap, and line feed mode will now be
supported for conpty pass through.
## Validation Steps Performed
I've added an `LNM` test that checks the escape sequence is triggering
both of the expected mode changes, and added an additional `DECRQM` test
covering the currently implemented standard modes: the new `LNM`, and
the existing `IRM` (which wasn't previously tested). I've also extended
the `DECRQM` private mode test to cover `DECAWM` and Bracketed Paste
(which we also weren't previously testing).
I've manually tested `LNM` in Vttest to confirm the keyboard is working
as expected.
Closes#15167
`WindowEmperor` would exit as soon as the last window would enter
`RundownForExit()`, which is too early and triggers leak checks.
This commit splits up the shutdown up into deregistering the window from
the list of windows and into actually decrementing the window count.
Closes#15306
## Validation Steps Performed
* D2D leak warnings seem to disappear ✅
We don't need to recreate the `MediaPlayer` to avoid the influence of
media keys if we simply opt out of media key controls.
## Validation Steps Performed
* Set a random .wav as the bell sound
* Bell is audible ✅
* Media keys have no effect while the sound plays ✅
`ControlCore` contained two bugs:
* Race condition on access of the 3 throttled funcs which may now
be `reset()` during tear out
* The `ScrollPositionChanged` event emitter was written incorrectly
and would emit the event from the background thread without
throttling during tear out
I found that in all our Helix runs, we had a pesky dialog sitting on top
of the Terminal. Probably the entire time.
This will, as a side effect, PGO the nearby font loader.
Before process model v3, each Terminal window was running in its own process, each with its own CWD. This allowed `startingDirectory: .` to work relative to the terminal's own CWD. However, now all windows share the same process, so there can only be one CWD. That's not great - folks who right-click "open in terminal", then "Use parent process directory" are only ever going to be able to use the CWD of the _first_ terminal opened.
This PR remedies this issue, with a theory we had for another issue. Essentially, we'll give each Terminal window a "virtual" CWD. The Terminal isn't actually in that CWD, the terminal is in `system32`. This also will prevent the Terminal from locking the directory it was originally opened in.
* Closes#5506
* There wasn't a 1.18 issue for "Use parent process directory is broken" yet, presumably selfhosters aren't using that feature
* Related to #14957
Many more notes on this topic in https://github.com/microsoft/terminal/issues/4637#issuecomment-1531979200
> **Warning**
> ## Breaking change‼️
This will break a profile like
```json
{
"commandline": "media-test.exe",
"name": "Use CWD for media-test",
"startingDirectory": "."
},
```
if the user right-clicks "open in terminal", then attempts to open that profile. There's some theoretical work we could do in a follow up to fix this, but I'm inclined to say that relative paths for `commandline`s were already dangerous and should have been avoided.
After retrieving the items via `GetStorageItemsAsync()` inside a try
clause it fails to check if the pointer is actually non-null.
Apart from this this commit fixes the unsafe use of `this` by properly
using `get_weak()`. Finally it allows >1 paths to be dropped.
## Validation Steps Performed
* Dropping >1 file works ✅
* Dropping >1 directory works ✅
Tl;dr: Conpty would flush a frame whenever it encountered a FTCS mark.
Combine that with the whole-line redrawing that nushell does, and the
Terminal would get the prompt in two frames instead of one, causing a
slight flickering. This fixes that by rendering the frame, but not
flushing to the pipe when we encounter one of these sequences.
Closes#13710
A complication here: there are some sequences that we passthrough
_immediately_ when we encounter them. For example, `\x1b[ 2q`. we need
to also not flush when we encounter one of these sequences. nushell
emits one of these as a part of the prompt, and that would force the
buffered frame to get written _anyways_, before writing that to the
pipe.
Adds support for CSI 18t to report the buffer screen size in characters.
This pull request adds support for **CSI 18t**. When submitted to the
terminal, it will respond with **"\033[8;{A};{B}t"** where **A** is
equal to the **height** and **B** is equal to the **width** of the
screen buffer in the number of characters (not pixels).
## Validation Steps Performed
Manual tests against PowerShell 7 and ConHost.
Added adapterTest
Closes#13944
Adds
```
{ "command": "showContextMenu", "keys": "menu" },
```
as a default action. This will manually invoke the control context menu
(from #14775), even with the setting disabled.
As discussed with Dustin.
We need to act like a ConPTY just a little earlier in startup. My relevant notes start here: https://github.com/microsoft/terminal/issues/15245#issuecomment-1536150388.
Basically, we'd create the first screen buffer with 9001 rows, because it would be created _before_ VtIo would be in a state to say "yes, we're a conpty". Then, if a CLI app emits an entire screenful of text _before_ the terminal has a chance to resize the conpty, then the conpty will explode during `_DoLineFeed`. That method is absolutely not expecting the buffer to get resized (and the old text buffer deallocated).
Instead, this will treat the console as in ConPty mode as soon as `VtIo::Initialize` is called (this is during `ConsoleCreateIoThread`, which is right at the end of `ConsoleEstablishHandoff`, which is before the API server starts to process the client connect message). THEORETICALLY, `VtIo` could `Initialize` then fail to create objects in `CreateIoHandlers` (which is what we used to treat as the moment that we were in conpty mode). However, if we do fail out of `CreateIoHandlers`, then the console itself will fail to start up, and just die. So I don't think that's needed.
This fixes#15245. I think this is PROBABLY also the solution to #14512, but I'm not gonna explicitly mark closed. We'll loop back on it.
Oklab by Björn Ottosson is a color space that has less irregularities
than the CIELAB color space used for ΔE2000. The distance metric for
Oklab (ΔEOK) is defined by CSS4 as the simple euclidian distance.
This allows us to drastically simplify the code needed to determine
a color that has enough contrast. The new implementation still lacks
proper gamut mapping, but that's another and less important issue.
I also made it so that text with the dim attribute gets adjusted just
like regular text, since this is an accessibility feature after all.
The new code is so much faster than the old code (12-125x) that I
dropped any caching code we had. While this increases the CPU overhead
when printing lots of indexed colors, the code is way less complex now.
"Increases" in this case however means something in the order of 15-60ns
per color change (as measured on my CPU). It's possible to further
improve the performance using explicit SIMD instructions, but I've
left that as a future improvement, since that will make the code quite
a bit more verbose and I didn't want to hinder the initial review.
Finally, these new routines are also used for ensuring that the
AtlasEngine cursors remains visible at all times.
Closes#9610
## Validation Steps Performed
* When `adjustIndistinguishableColors` is enabled
colors are distinguishable ✅
* An inverted cursor on top of a `#7f7f7f` foreground & background
is still visible ✅
* A colored cursor on top of a background with identical color
is still visible ✅
* Cursors on a transparent background are visible ✅
This commit makes a few changes to avoid bugs, but they basically boil
down to: When we scroll by an entire viewport worth of content, we must
ensure that the scroll offset is 0, because otherwise the scroll rect
(that's basically the viewport, but excluding the scroll offset) will
end up being empty, which the `Present1` API chokes on. This commit
avoids this situation by shuffling around some code to first calculate
the dirty rows, _then_ check if it affects all of them and in that case
sets the scroll offset to 0, and only then finally actually does any
scrolling if there's still something to scroll.
## Validation Steps Performed
* Start pwsh
* Zoom in twice with Ctrl+Scrollwheel
* Print a few viewports worth of text
* Press Ctrl+L
* No errors ✅
Get the locale from `GetUserDefaultLocaleName` and pass it to
DirectWrite's `GetGlyphs` / `GetGlyphPlacements`.
This change is very important for some fonts, which heavily depend on
the locl table, like Source Han Sans for instance.
Closes#13685
## Validation Steps Performed
* Set font to Cascadia Code
* Set locale to "pl-PL"
* Type "Ć"
* The acute is less angled and almost vertical ✅
## Summary of the Pull Request
This was a fever dream I had last July. What if, instead of `WINRT_PROPERTY` magic macros everywhere, we had actual templated versions you could debug into.
So instead of
```c++
WINRT_PROPERTY(bool, Deleted, false);
WINRT_PROPERTY(OriginTag, Origin, OriginTag::None);
WINRT_PROPERTY(guid, Updates);
```
you'd do
```c++
til::property<bool> Deleted{ false };
til::property<OriginTag> Origin{ OriginTag::None };
til::property<guid> Updates;
```
.... and then I just kinda kept doing that. So I did that for `til::event`.
**AND THEN LAST WEEK**
Raymond Chen was like: ["this is a good idea"](https://devblogs.microsoft.com/oldnewthing/20230317-00/?p=107946)
So here it is.
## Validation Steps Performed
Added some simple tests.
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
`IDWriteFontSetBuilder` is super expensive (~40ms of CPU for building a
single font set on a high-end CPU from ~2021). Let's avoid the cost,
by only constructing it if Cascadia Code is actually missing.
To not overcomplicate the code and to support any additional fonts we
might ship in the future, I'm not checking for the font name, and
instead I just construct the font set whenever any font is missing.
Part of #5907
## Validation Steps Performed
* Breakpoints in FontCache aren't hit ✅
* App doesn't crash ✅
This MR introduces `activeOnly ` for the `showCloseButton` theme option
causing the close button only to appear on the active tab.
This is more or less following the approach explained here
https://github.com/orgs/microsoft/projects/686/views/2?pane=issue&itemId=19775774
which indeed just works 😄 .
You notice when switching theme the close buttons is back on all tabs
again as well.
Closes#13672
I didn't check specific unit tests for this. I hope by making this MR
the pipeline will show if I broke something. Or just let me know if you
want me to add something specific for this.
## Summary of the Pull Request
When the screen is resized in ConHost via a VT escape sequence, the
active text attributes could end up being corrupted if they were set to
something that the legacy console APIs didn't support (e.g. RGB colors).
This PR fixes that issue.
## Detailed Description of the Pull Request / Additional comments
The way a resize is implemented is by retrieving the buffer information
with `GetConsoleScreenBufferInfoEx`, updating the size fields, and then
writing the data back out again with `SetConsoleScreenBufferInfoEx`.
However, this also results in the active attributes being updated via
the `wAttributes` field, and that's only capable of representing legacy
console attributes.
We address this by saving the full `TextAttribute` value before it gets
corrupted in the `SetConsoleScreenBufferInfoEx` call, and then restore
it again afterwards.
## Validation Steps Performed
I've added a unit test to verify the attributes are correctly preserved
for all VT resize operations, and I've also manually confirmed the test
case in #2540 is now working as expected.
## PR Checklist
- [x] Closes#2540
- [x] Tests added/passed
- [ ] Documentation updated
- [ ] Schema updated (if necessary)
Basically, just make sure that we register our `SettingsChanged` handler
in `TerminalWindow` _after_ `TerminalWindow` is actually ready to handle
it. _duh_.
Closes#15209
If you were really fast, and closed one window, and then tried to drag
the only tab out of the last remaining window, the Terminal could
explode. It'd attempt to restore the previous window state, and explode.
Easy way to stop this (also, be more robust): just don't attempt to
restore windows during tear-out. That's obvious.
This is a part of #14957
A resurrection of the original nested "Close" menu from #7728. We
discovered that nested flyouts crash in #8238. Those are fixed now
though! So we can bring this back.
This also includes the "Close Pane" item from #15198.
Adds an action for immediately restarting the connection. I suspect
most folks that wanted #3726 will be happy just with the
<kbd>enter</kbd> solution from #14060, but this will work without having
to `exit` the client. Just, relaunch whatever the commandline is. Easy
peasy.
Closes#3726.
Obsoletes #14549
A different take on #14548.
> We didn't love that a connection could transition back in the state
diagram, from Closed -> Start. That felt wrong. To remedy this, we're
going to allow the ControlCore to...
ASK the app to restart its connection. This is a much more sensible
approach, than leaving the ConnectionInfo in the core and having the
core do the restart itself. That's mental.
Cleanup from #14060Closes#14327
Obsoletes #14548
This PR gives the atlas engine an attempt to retry a couple operations
where it asks for debug flags when we're in debug mode. If you don't
have the Graphics debugger and GPU profiler for DirectX installed, then
these calls will fail, and we end up blowing up the renderer. Instead,
just try again.
Originally, I actually thought I had hit #14082, but after sorting this
out, it was just #14316.
closes#14316
Adds support to jump list generation for icon paths that include an
indirect reference e.g. `c:\windows\system32\shell32.dll,214`
If given a path that has an indirect icon reference parse the path into
component parts `filePath` and `iconIndex` and use
`IShellLinkW::SetIconLocation` to set the Icon for the entry. Otherwise
do what we always do.
This PR also introduces `til::to_int`, which is based on `til::to_ulong`
and supports signed integers.
## Validation Steps Performed
Icons were visible in the jump list and in terminal next to the
profiles.
Closes#15205
## Summary of the Pull Request
Adding a 'Close Pane' menu item in the context menu.
## References and Relevant Issues
#13580
## Detailed Description of the Pull Request / Additional comments
If a user decides to split a tab to create multiple panes through the
context menu, they should be able to then close the pane via the context
menu too. This PR introduces a new context menu item, 'Close Pane', that
only appears when a user has 2 or more panes in a tab. When a user
clicks close pane, the _active_pane will be closed.
## Validation Steps Performed
As it's my first PR, I still need to understand how to go through the
testing suite.
## PR Checklist
- [x] Closes#13580
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
---------
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
This is an update of our Primary Device Attributes report, which better
indicates the feature extensions that we now support.
## Detailed Description of the Pull Request / Additional comments
This first parameter of the response is 61, representing a conformance
level of 1. The subsequent parameters identify the supported feature
extensions.
1 = 132 column mode
6 = Selective erase
7 = Soft fonts
22 = Color text
23 = Greek character sets
24 = Turkish character sets
28 = Rectangular area operations
32 = Text macros
42 = ISO Latin-2 character set
Most of these features are handled entirely within `AdaptDispatch`, so
they apply to all clients. However, 132 column mode is only supported by
ConHost, so we don't report that for conpty clients.
And note that soft fonts won't necessarily work in all conpty clients,
but we don't have an easy way of determining that, so we just report
soft font support for everyone.
## Validation Steps Performed
I've manually verified that the `DA1` report is returning the expected
response in Vttest, both from ConHost and Windows Terminal.
I've also updated the `DeviceAttributesTests` in the adapter tests to
account for the new expected response.
Closes#14491
This adds support for XTerm's "bracketed paste" mode in ConHost. When
enabled, any pasted text is bracketed with a pair of escape sequences,
which lets the receiving application know that the content was pasted
rather than typed.
## References and Relevant Issues
Bracketed paste mode was added to Windows Terminal in PR #9034.
Adding it to ConHost ticks one more item off the list in #13408.
## Detailed Description of the Pull Request / Additional comments
This only applies when VT input mode is enabled, since that is the way
Windows Terminal currently works.
When it comes to filtering, though, the only change I've made is to
filter out the escape character, and only when bracketed mode is
enabled. That's necessary to prevent any attempts to bypass the
bracketing, but I didn't want to mess with the expected behavior for
legacy apps if bracketed mode is disabled.
## Validation Steps Performed
Manually tested in bash with `bind 'set enable-bracketed-paste on'` and
confirmed that pasted content is now buffered, instead of being executed
immediately.
Also tested in VIM, and confirmed that you can now paste preformatted
code without the autoindent breaking the formatting.
Closes#395
This is practically a from scratch rewrite of AtlasEngine.
The initial approach used a very classic monospace text renderer, where
the viewport is subdivided into cells and each cell is assigned one
glyph texture, just like how real terminals used to work.
While we knew that it would have problems with overly large glyphs,
like those found in less often used languages, we didn't expect the
absolutely massive number of fonts that this approach would break.
For one, the assumption that monospace fonts are actually mostly
monospace has turned out to be a complete lie and we can't force users
to use better designed fonts. But more importantly, we can't just
design an entire Unicode fallback font collection from scratch where
every major glyph is monospace either. This is especially problematic
for vertical overhangs which are extremely difficult to handle in a
way that outperforms the much simpler alternative approach:
Just implementing a bog-standard, modern, quad-based text renderer.
Such an approach is both, less code and runs faster due to a less
complex CPU-side. The text shaping engine (in our case DirectWrite)
has to resolve text into glyph indices anyways, so using them directly
for text rendering allows reduces the effort of turning it back into
text ranges and hashing those. It's memory overhead is also reduced,
because we can now break up long ligatures into their individual glyphs.
Especially on AMD APUs I found this approach to run much faster.
A list of issues I think are either obsolete (and could be closed)
or resolved with this PR in combination with #14255:
Closes#6864Closes#6974Closes#8993Closes#9940Closes#10128Closes#12537Closes#13064Closes#13527Closes#13662Closes#13700Closes#13989Closes#14022Closes#14057Closes#14094Closes#14098Closes#14117Closes#14533Closes#14877
## PR Checklist
* Enabling software rendering enables D2D mode ✅
* Both D2D and D3D:
* Background appears correctly ✅✅
* Text appears correctly
* Cascadia Code Regular ✅✅
* Cascadia Code Bold ✅✅
* Cascadia Code Italic ✅✅
* Cascadia Code block chars leave (almost) no gaps ✅✅
* Terminus TTF at 13.5pt leaves no gaps between block chars ✅✅
* ``"`u{e0b2}`u{e0b0}"`` in Fira Code Nerd Font forms a square ✅✅
* Cursor appears correctly
* Legacy small/medium/large ✅✅
* Vertical bar ✅✅
* Underscore ✅✅
* Empty box ✅✅
* Full box ✅✅
* Double underscore ✅✅
* Changing the cursor color works ✅✅
* Selection appears correctly ✅✅
* Scrolling in various manners always renders correctly ✅✅
* Changing the text antialising mode works ✅✅
* Semi-transparent backgrounds work ✅✅
* Scroll-zooming the font size works ✅✅
* Double-size characters work ✅✅
* Resizing while text is printing works ✅✅
* DWM `+Heatmap_ShowDirtyRegions` shows that only the cursor
region is dirty when it's blinking ✅✅
* D2D
* Margins are filled with background color ❌
They're filled with the neighboring's cell background color for
convenience, as D2D doesn't support `D3D11_TEXTURE_ADDRESS_BORDER`
* D3D
* Margins are filled with background color ✅
* Soft fonts work ✅
* Custom shaders enable continous redraw if time constant is used ✅
* Retro shader appears correctly ✅
* Resizing while a custom shader is running works ✅
The AppInitialized latency metric logs how long the application needs
to initialize the UI. 5b434dc broke this metric, because it was now
executing the code outside of the `Initialized` callback.
It's the difference between a "latency" of ~50ms and ~350ms.
As an added bonus it moves the `_ApplyStartupTaskStateChange` task
into the `Initialized` callback as well, because why not.
## Validation Steps Performed
* Breakpoint into "AppInitialized" - latency is now correct ✅
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
## Summary of the Pull Request
There are certain escape sequences that use the `VTParameters::subspan`
method to access a subsection of the provided parameter list. When the
parameter list is empty, that `subspan` call can end up using an offset
that is out of range, which causes the terminal to crash. This PR stops
that from happening by clamping the offset so it's in range.
## References and Relevant Issues
This bug effected the `DECCARA` and `DECRARA` operations introduced in
PR #14285, and the `DECPS` operation introduced in PR #13208.
## Validation Steps Performed
I've manually confirmed that the sequences mentioned above are no longer
crashing when executed with an empty parameter list, and I've added a
little unit test that checks `VTParameters::subspan` method is returning
the expected results when passed an offset that is out of range.
## PR Checklist
- [x] Closes#15234
- [x] Tests added/passed
- [ ] Documentation updated
- [ ] Schema updated (if necessary)
We had a report in a mail thread that someone's Terminal windows were
getting created hidden, and never showing themselves.
As a theory, I'm guessing that dwFlags didn't say that we should
actually use `wShowWindow`. So, to be more correct, let's actually obey
that.
I'm gonna send this package to them to see if it fixes them.
Related to #14957.
Likely regressed in #13838.
This bug causes AtlasEngine to render buffer contents with an incorrect
`cellCount`, which may either cause it to draw the contents only
partially, or potentially access the TextBuffer contents out of bounds.
`EnablePainting` sets the `_viewport` to the current viewport for some
unfortunate (and quite buggy/incorrect) caching purposes, which causes
`_CheckViewportAndScroll()` to think that the viewport hasn't changed
in the new window. We can ensure `_CheckViewportAndScroll()` works
by also setting `_forceUpdateViewport` to `true`.
Part of #14957
## PR Checklist
* Tear out a tab from a smaller window to a larger window
* Renderer contents adept to the larger window size ✅
---------
Co-authored-by: Mike Griese <migrie@microsoft.com>
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
It seemed dangerous to just have places all over Pane where we
manipulate the whole cadre of TermControl events. Seemed ripe for a
copypasta error. This moves that around, so there's only two methods for
messing with the TermControl callbacks: `_setupControlEvents` and
`_removeControlEvents`.
Closes: nothing. This was an off-the-cuff commit that seemed valuable.
Original bug report #15049
Relates to feature #1571
MenuFlyoutSubItem, when collapsing from profile selection, move focus
back to the titlebar.
An extra Closing event handler is needed to keep focus on the command
shell.
Closes#15049
The ability to build and run Terminal as a UWP application was removed
in #12119. We left some of its vestiges around, but now there is no need
for them.
See
https://github.com/microsoft/terminal/issues/14957#issuecomment-1520522722.
I think there's a race here that lets the WindowEmperor muck around with
the window after it's done, but before we remove it from our list of
threads.
This _should_ remove the thread from the list, _then_ null out the
AppHost, then flush the XAML queue, preventing the A/V.
Closes MSFT:43995981
Adds a "Select command" and a "Select output" entry to the right-click
context menu when the user has shell integration enabled. This lets the
user quickly right-click on a command and select the entire commandline
or all of its output.
This was a "I'm waiting for reviews" sorta idea. Seemed like a
reasonable combination of features. Related to #13445, #11000.
Tested manually.
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
`WINRT_LEAN_AND_MEAN` removes a bunch of less often used parts of the
C++/WinRT headers:
- `std::hash` specializations for every object
- `operator <<(ostream)` overloads for any `IStringable`
- Interface producers for interfaces that are marked "exclusive"
There's only one place where we were using even one of these.
Enabling this saves us (optimistically) 30 seconds of build time on the
CI agents and shrinks our largest PCH (TerminalApp, x64, Debug) by about
150MiB.
It's not huge, but it's not nothing.
Just changing the Theme also doesn't seem to work by itself - there
seems to be a way for the tab to set the deselected foreground onto
itself as it becomes selected. If the mouse isn't over the tab, that can
result in mismatched fg/bg's
Regressed around #15078Closes#15184
Default to XamlRoot when unable to find a focused object in
DirectKeyEvents
This may not be the most appropriate "fix" for this. Certainly open to
criticism and feedback. We are trapping the alt+space key chord on the
win32 side and forwarding it to the xaml side. There we try to find a
focused object by walking the xaml tree. If we are unable to find a
focused object we return false and do nothing. I suspect that the area
that has focus that prevents this from working normally is on the win32
side. Since we want to handle the system menu anyway and are explicitly
trapping that key combo and forwarding it on I thought this was the best
approach. If we cant find a focused object default to the xaml root.
## Validation Steps Performed
System menu opens as it should.
Closes#14397
Set the padding to the default TabViewHeaderPadding (8,0,0,0), but with
-1 on the bottom. This prevents a small 1px gap that can appear on 150%
scale displays between the tab item and the content. The 1 on top helps
keep
the tab the correct relative height within the tab row.
Regressed in #15078
See also MSFT:40692364
Add automation heading level 1 to fix the about dialog by adding an
automation property.
Allows screen reader to pick up that this is a heading and read
properly.
Closes#11912
---------
Co-authored-by: Mike Griese <migrie@microsoft.com>
This PR adds a convenience feature to New-UnpackagedTerminalDistribution
that produces an unpackaged layout from an already-unpacked AppX, like
the one Visual Studio registers.
```powershell
New-UnpackagedTerminalDistribution `
-TerminalLayout path\to\bin\x64\Debug\AppX `
-XamlAppX path\to\xaml\2.8.appx
```
The output item when you build an unpackaged layout is the temp folder
in which the distribution was built. It will not make a zip file for
you.
## Summary of the Pull Request
Add an infobar warning when a non-monospaced font is selected.
## References and Relevant Issues
#13389
## Detailed Description of the Pull Request / Additional comments
I initially had the `IsOpen` property of the infobar bound to the
`ShowAllFonts` checkbox property. However, I felt we could do better by
adding a property for it since there was already a method defined to
inspect whether the selected font was in the `MonoSpaceFontList`.
## Validation Steps Performed
Warning shows up when a non-monospaced font is selected either globally
or on individual profiles. All existing tests continue to pass.
<img width="868" alt="image"
src="https://user-images.githubusercontent.com/2086722/232594214-cd42397b-ce9d-499c-aa73-3feaa45e850e.png">
## PR Checklist
- [x] Closes#13389
- [x] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
Adds two new commands, `selectOutput` and `selectCommand`. These don't
do much without shell integration enabled, unfortunately. If you do
enable it, however, you can use these commands to quickly navigate the
history to select whole commands (or their output).
Some sample JSON:
```json
{ "keys": "ctrl+shift+<", "command": { "action": "selectCommand", "direction": "prev" } },
{ "keys": "ctrl+shift+>", "command": { "action": "selectCommand", "direction": "next" } },
{ "keys": "ctrl+shift+[", "command": { "action": "selectOutput", "direction": "prev" } },
{ "keys": "ctrl+shift+]", "command": { "action": "selectOutput", "direction": "next" } },
```
**Demo gifs** in
https://github.com/microsoft/terminal/issues/4588#issuecomment-1352042789closes#4588
Tested manually.
<details>
<summary>CMD.exe user? It's dangerous to go alone! Take this.</summary>
Surely, there's a simpler way to do it, this is adapted from my own
script.
```cmd
prompt $e]133;D$e\$e]133;A$e\$e\$e]9;9;$P$e\$e[30;107m[$T]$e[97;46m$g$P$e[36;49m$g$e[0m$e[K$_$e[0m$e[94m%username%$e[0m@$e[32m%computername%$e[0m$G$e]133;B$e\
```
</details>
This fixes 3 sources for animations:
* `TabView`'s `EntranceThemeTransition` causes tabs to slowly slide in
from the bottom. Removing the transition requires you to override the
entire list of transitions obviously, which is a global change. Nice.
Am I glad I don't need to deal with the complexity of CSS. /s
* `TabBase`, `SettingsTab` and `TerminalTab` were using a lot of
coroutines with `resume_foreground` even though almost none of the
functions are called from background tabs in the first place. This
caused us to miss the initial XAML drawing pass, which resulted in
animations when the tab icons would asynchronously pop into existence.
It also appears as if `resume_foreground`, etc. have a very high CPU
cost attached, which surprises me absolutely not at all given WinRT.
The improvement is difficult to quantify because the run to run
variation is very high. But it seems like this shaves about 10% off
of the ~500ms startup delay on my PC depending on how you measure it.
Part of #5907
## PR Checklist
* It starts when it should ✅
* It doesn't "exit" when it shouldn't ✅
(Scrolling, Settings reload, Bell `\a`, Progress `\e]9;4;2;80\e\\`)
This sets `x:Load` to `false` for the two elements.
On my system, with Windows Defender disabled, this reduces CPU
usage by 15ms and the visual delay during launch by 40ms.
Part of #5907
## Validation Steps Performed
* Ctrl+Shift+P opens command palette ✅
* Context menu opens command palette ✅
* Context menu opens about dialog ✅
`WM_ACTIVATE` is sent on window creation, whereas `WM_SHOWWINDOW` is
sent when the window is shown. Before we call `Peasant::ActivateWindow`
in the `WM_ACTIVATE` handler, we try to get the virtual desktop GUID of
our window, but since it's not shown yet during startup, there's also
no GUID that can be retrieved. This results in an error log message and
an all 0 GUID to be sent via `Peasant::ActivateWindow`.
The GUID of the window that actually spawned on the other hand is never
reported until the first time you reactivate it again, leading to a
number of subtle bugs around window activity.
Additionally, this commit fixes a race condition and pointer unsafety,
by pulling all relevant member variables onto the coroutine's stack,
before it yields itself to a background thread.
## Validation Steps Performed
- Set a trace breakpoint on `_peasantNotifyActivateWindow`
- GUID is non-zero ✅
## Summary of the Pull Request
Add subtext that lets the user know why Always show tabs is not
toggleable in SUI. Also adds some additional information to the comment
for this value that points to the Globals_ShowTitlebar.Header setting.
## References and Relevant Issues
#13984
## Detailed Description of the Pull Request / Additional comments
Simple updates to the resources that add some additional helpful
information for the user.
## Validation Steps Performed
Verified the updates show in the SUI and that they render correctly.
## PR Checklist
- [ ] Closes#13984
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
---------
Co-authored-by: Mike Griese <migrie@microsoft.com>
Original description, pre-process model v3:
> This is just the `SHOWDEFAULT` bit from #12979. This seems to also
work now, but I'm PR'ing it separately so it can be a separate revert
from #13811, if it is problematic.
More accurately:
This PR enables terminal windows to use the `wShowCmd` from the
STARTUPINFO passed to `windowsterminal.exe` to set the initial
visibility of the window. We can't just use `SW_SHOWDEFAULT`, because
all the windows are running in the initial process! After the first
window, the subsequent ones would ignore any params passed to their
originating `windowsterminal.exe` processes. To mitigate, we pass that
`wShowCmd` info from the source process, to the actual running terminal
process. That accounts for most of the delta here.
Closes#9053
This doesn't do the same for defterm-initiated connections. This is
because we don't need to! Defterm very explicitly rejects handoff for
minimized console apps. This is probably for the best! I put an attempt
in 66f8b25ec before I forgot that it was filtered long before the
Terminal. NOT doing this for /min saves us all sorts of "what happens if
`start /min cmd` tries to glom?" or "what if someone does `start /min
cmd && start /max cmd` and they glom together?".
<hr>
Also closes#15193, which was introduced as a part of this.
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
* make the list of MenuItems observable, so the nav view can actually
listen for changes to it
* Use the MenuItemsSource to find the index to add at, rather than the
MenuItems (which isn't accurate anymore)
* Stash a single observable vector as the menuitemsource, and modify
that whenever we need to do modifications.
* I attempted to create a new vector, then copy into the new one, then
replace the MenuItemsSource with the new vector, but that _refused_ to
work. So let's just... not.
Regressed in #14630Closes#15140
Manually validated that this and #13673 are still fixed
This pull request adds the requirement for the shift key to be pressed
in addition to the control key.
References #14810
Implemented in #14873
This is follow up work from my last pull request that was merged that
only required the control key to be pressed to launch the terminal as
admin from the shell context menu. After some discussion it was decided
that the shift key should be required as well as that is the norm on
Windows.
## Validation Steps Performed
Tested all combinations of shift+ctrl and verified that the terminal
only requests elevation when a shift and control key are pressed
together. The shell launches regularly if not.
This fixes the BreadcrumbBar issue that would crash into the debugger
anytime you open the SUI on a second thread.
See #14957.
Maybe also tracked in #15144 - let's have @j4james test when this
merges.
TL;DR: we stopped getting `TabView.TabItemsChanged`. This meant that the
tab view would change its apparent order, but we wouldn't change the
backing tab order.
I'm fixing this by grabbing the index of the tab that starts the drag,
and the index of the tab view item at the end of the drag, and using
that to reorder our backing list.
Closes#15121
Upstream https://github.com/microsoft/microsoft-ui-xaml/issues/8388
Regressed in #15078 - I'm pretty confident about this, since I've got a
1.18.931 build of the Terminal with tear-out, but not MUX 2.8.
The code changes are mostly self-explanatory: Just skip glyphs
that can never be inserted. I implemented it slightly incorrectly
(a newline will be inserted every time you write such a wide glyph),
but it's a niche issue and I think the simplicity of the fix is
more important than its exact correctness.
It also contains a fix for some severe log spam due to
`_PrepareForDoubleByteSequence` complaining in this situation.
The spam is so bad that it freezes the app for a few seconds
during text buffer reflow.
Closes#7416
## Validation Steps Performed
* Open an extra pane and run `TerminalStress.exe` in there
* Resize to 1 column
* Doesn't hang ✅
Hides the cursor when null, shows it when not.
Clear the screen any time the connection is changed.
This prevents the WPF Control from crashing when set back to null, clears
the console and hides the mouse as well.
It sends 3 VT sequences as well now:
1) When the Connection is set to null the cursor is hidden (reflects
what the default state is)
2) When the Connection is set to a value and it was null before we show
the cursor (not a breaking change as requires it to have been null which
previously would cause a crash, except for for set)
3) When the Connection is changed the terminal is reset. A breaking
change officially although not sure if there are use cases where this
behavior is not desired. For added safety we could make sure we are not
being set to the same value we currently are.
None of the ansi commands are needed, users could do it all themselves
as well, the behavior largely seemed natural though. I didn't see any
ansi constants anywhere so they are just hard coded with comments, but
not sure if there is an established better practice.
Closes#15061
## Summary of the Pull Request
This pull request updates the implementation of the copy assignment
operator for Pane::LayoutSizeNode to a more efficient version and
eliminates the need for the _AssignChildNode code block.
## References and Relevant Issues
#11965#11963
## Detailed Description of the Pull Request / Additional comments
My understanding of the discussion and intent of the two linked issues
is that this is a more efficient way to implement the copy assignment
operator for Pane.LayoutSizeNode and eliminates the need for the code
block _AssignChildNode. Since both were relatively small changes, I
combined the two in one PR. If that is not desirable, I can separate
them. All existing tests continue to pass.
<img width="769" alt="image"
src="https://user-images.githubusercontent.com/2086722/231326683-8f685f58-5748-4d49-8a38-80ef5db3d5a2.png">
## Validation Steps Performed
All existing tests pass. No visible changes in behavior of the terminal.
## PR Checklist
- [x] Closes#11963
- [x] Closes#11965
- [x] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
As discussed in #6507
Newer builds of Windows do this automatically. However, this was spotted
in the wild on 1.18. It's possible the threading changes created a
situation where the OS-side fix no longer applied to us. So let's just
do it manually. It doesn't have any side effects.
I saw this once on Win11, but couldn't repro it this morning when I
tried to add this fix. I'm just gonna assume this worked, despite the
fact that I can't repro it on win11 anymore.
closes#6507
See also #14957
## detailed description
> `WindowsXamlManager::XamlCore::Initialize` calls
`ConfigureCoreWindow`, which creates a `CoreWindow` on the thread
> Problem is, we're calling that on the main thread (which doesn't have
_any_ windows), and then eventually creating a `DesktopWindowXamlSource`
on a second thread for the actual window
> It's not that it "manages a window", it's that it "manages xaml on
Windows OS". just use ICoreWindowInterop -- QI for ICoreWindowInterop
and call get_WindowHandle.
Also see:
*
[ICoreWindowInterop](https://learn.microsoft.com/en-us/windows/win32/api/corewindow/nn-corewindow-icorewindowinterop)
*
[WindowsXamlManager.InitializeForCurrentThread](https://learn.microsoft.com/en-us/uwp/api/windows.ui.xaml.hosting.windowsxamlmanager.initializeforcurrentthread?view=winrt-22621#windows-ui-xaml-hosting-windowsxamlmanager-initializeforcurrentthread)
* The source code in
`onecoreuap\windows\dxaml\xcp\dxaml\lib\WindowsXamlManager_Partial.*`
* os.2020!6102020 which fixed MSFT:33498969, MSFT:27807465,
MSFT:21854264
Fixes an issue when using both:
```json
"centerOnLaunch": true,
"firstWindowPreference": "persistedWindowLayout",
```
In this case, the Terminal would ignore the persisted location and still
just center on launch. This has been really annoying while testing
tear-out, as we keep re-opening all my debug windows as a stack on top
of each other.
Looking through this test, I seriously don't understand how this doesn't
work. I mean, I don't really get how it _does_ work, but at this point
in the tests, we've actually established that both `Nihilist.exe` _and_
openconsole are running. From my read, there's no reason these should be
failing at this point.
We previously added a "retry 5 times" bit to this test, in #8534. That
did work back then. So uh, just do that... again?
Moves our `GetWindowLayoutRequested` handler AFTER the xaml island is
started. The `AppHost::_GetWindowLayoutAsync` handler requires us to be
able to work on our UI thread, which requires that we have a
`Dispatcher` ready for us to move to. If we set up this callback in the
ctor, then it is possible for there to be a time slice where
* the monarch creates the peasant for us,
* we get ctor'ed (registering the callback)
* then the monarch attempts to query all _peasants_ for their layout,
coming back to ask us even before XAML has been created.
I believe this was the source of the crash that was reported in a mail
thread. It actually happened to me once while debugging another branch.
Alas, this was realy hard to hit in the first place, so I'm not
_totally_ certain this fixes it.
Related to #14957
Don't generate a profile for rancher-desktop utility WSL distro.
Adds a check for rancher-desktop as well as docker. As mentioned in the
discussion of this issue. This becomes much more difficult to maintain
once other folks inevitably start to follow this pattern. But the easy
win was up for grabs so I took it :)
Closes#12757
Existing environment variables can be referenced by enclosing the name
in percent characters (e.g. `%PATH%`).
Resurrects #9287 by @christapley.
Tests added and manually tested.
Closes#2785Closes#9233
Co-authored-by: Chris Tapley <chris.tapley.81@gmail.com>
When win32-input-mode is enabled, we generate an input sequence for both
key down and key up events. However, in the initial implementation the
key up sequence for most keypresses would be faked - they were generated
at the same time as the key down sequence, regardless of when the key
was actually released. After this PR, we'll only generate the key up
sequence once a key has actually been released.
## References and Relevant Issues
The initial implementation of win32-input-mode was in PR #6309.
The spec for win32-input-mode was in PR #5887.
## Validation Steps Performed
I've manually tested this with an app that polls `ReadConsoleInput` in a
loop and logs the results. With this PR applied, I can now see the key
up events as a key is released, rather than when it was first pressed.
When compared with conhost, though, there are some differences. When
typing a shifted key, e.g. `Shift`+`A`, WT generates key down and key up
events for both the `Shift` and the `A`, while conhost only generates
both events for the `Shift` - the `A` won't generate a key up event
unless you release the `Shift` before the `A`. That seems more like a
conhost flaw though.
Another case I tested was the Japanese Microsoft IME, which in conhost
will generate a key down event for the Japanese character being inserted
followed by a key up event for for `Return`. WT generates key up events
for the ASCII characters being typed in the IME, then both a key down
and key up event for the inserted Japanese character, and finally a key
up event for `Return`. Both of those seem weird, but they still appear
to work OK.
The current version of WT actually produces the most sensible behavior
for the IME - it just generates key up and key down events for the
inserted character. But that's only because it's dropping most of the
system generated key up events.
Closes#8440
I have observed the test comment coming back from Helix with `"`
and friends in it.
It ends badly as you might imagine.
This unescape will be a no-op if the data is already well-formed.
This PR adds support to the About Dialog for checking the store to see
if there's a new version of the Terminal package available. We'll only
do this once per day, per terminal window.
In dev mode, we'll always fake it and say there's an update to `x.y.z`
available.
This also involved pulling all of the About dialog code out into its own
class. All that is goodness.
We don't currently provide a button for _installing_ the update. We just
check. Incremental progress is better than none.
Co-authored-by: Mike Griese <migrie@microsoft.com>
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
Some of our automated tooling detects this as being a private API that
we're accessing via LoadLibrary/GetProcAddress. It's not *wrong*, but
it's also not *right*.
It's easier for us to just not do it (and save all the code for it!) in
OpenConsole.
This is a revert of the revert of #12979. We mainly reverted that PR
because of an issue where restored windows would grow/shrink slightly on
external displays. It was too close to the ship date for that release,
so we backed it out wholesale (in #13098). I think I've found the real
root of the problem, and fixed it here.
The money diff here from the original PR:
4c08b9a1bc2e90b8284e4d8117d0de400784520f...c34495dcfc19ea67a9f4f9673d422760200683ab.
Basically, I had put the part where we actually handle the creation of
the window into `_AppInitializedHandler`, when we should have left the
window to be created in `_HandleCreateWindow` We create it there,
_hidden_, and then should only _show_ it in `_AppInitializedHandler`.
I'm _NOT_ incorporating the change for #9053. I reverted that bit in
1fac40355. I am too worried about that messing with the phwnd that I
wanted to get that reviewed and committed atomically, separately.
* fixes #11561
* tested manually
* I work here
This adds a setting (`compatibility.allowHeadless`) to let the Terminal
keep running even when all windows are closed. This lets hotkeys keep
working, because the Emperor thread is still running, just, without any
windows.
I'm really tempted to invoke the magic "closes" word on #9996, but
honestly, we should also add some sort of support for `wt --headless` or
`wt --hidden` or whatever, before we close that. There's also #13630
which seems imminently doable.
Tested manually. I'd post a gif of "close all terminal windows, then
invoke the quakeMode binding and \*presto\*, but that would be an
unnecessarily big gif.
Related to #9996 but not enough to close it if you ask me
This is a minimal version of the requests for #14858. In that thread we
discussed FULL reverting the default themes to the old ones. In later
discussion, we decided _meh_, let's just ship the legacy themes too, so
it's easy to go back if you should choose. The default still remains the
sane `dark`, but the `legacy*` themes are all right there, and given the
same special treatment as the other inbox themes.
Closes#14858Closes#14844
Making Conhost pick up codepage from .lnk files.
Because of the wrong assignment order, the Conhost was not picking up
the codepage stored in .lnk shortcut files. This change fixes this issue
by changing the order of the assignment to the correct one.
This is a potential backward compatibility issue.
Since this issue has been present in the codebase for years, this change
runs a high risk of breaking backward compatibility with software that
depends on incorrect behavior.
## Validation Steps Performed
Tested fix manually (using chcp command, making sure each .lnk codepage
was picked up.) against Debug/Release x64 builds with 5 different .lnk
files:
1. Arabic codepage 1256
2. Greek 869
3. Latin2 852
4. Thai 874
5. Traditional Chinese 50229
Ran TAEF tests against Debug/Release x64/x86 with identical results as
main branch.
Tested against invalid codepage numbers by manually manipulating .lnk
file binary. In case of an invalid codepage number, Conhost defaults to
a valid default one, which I assume is expected behavior.
Closes#14942
This is a regression caused by 599b550. If I'm reading `stream.cpp`
in cf87590 right, it returns `STATUS_SUCCESS` if `ReadCharacterInput`
read at least 1 character. I think? this PR makes the code behave
exactly equivalent. The old code is a bit of an "acquired taste"
so it's a bit hard to tell.
Closes#15116
## PR Checklist
* Run `more long_text_file.txt` in cmd
* Press Spacebar
* Scrolls down ✅
* Press Q
* Exits ✅
Unpackaged installations don't have the luxury of magic package
isolation to stop them from accidentally touching each other's monarchs.
We need to enforce that ourselves by making their monarch CLSIDs unique
per install.
We'll use a v5 UUID based on the install folder to unique them.
Closes#15117
Upgrading clang-format lead to a few changes in the formatting
of code inside macros. Apart from the upgrade, I've also spent
some time removing all options from .clang-format that are
redundant with `BasedOnStyle: Microsoft`.
This will allow us to share the same fundamental text insertion
logic for both `ResizeTraditional` and `Reflow`, because both
can be implemented with `ROW::CopyRangeFrom`. It also replaces
the `BufferAllocator` struct with a `_allocateBuffer` function
which will help us allocate scratch buffer rows in the future.
Closes#14696
## PR Checklist
* Disable reflow resize in conhost
* Print "zhwik8.txt" - a enwik8.txt equivalent of Chinese Wikipedia
* Run `color 80` in cmd
* Resize windows from 120 to 119 columns
* Wide glyphs disappear and are replaced with whitespace ✅
* Resizing the window to >120 columns adds gray whitespace ✅
On a real VT terminal, most of the control characters that don't do
anything are supposed to be filtered out, and not written to the buffer.
Up to to now, though, we've only been filtering out `NUL`. This PR
extends our control processing to filter the remaining characters that
aren't supposed to be displayed.
We introduced filtering for the `NUL` control in PR #3015.
The are two special cases worth mentioning.
1. The `SUB` control's main purpose is to the cancel a control sequence
that is in progress, but it also needs to output an error character (a
reverse question mark) to the display.
2. The `DEL` control is typically filtered out, but when a 96-character
set is designated, it can sometimes be mapped to a printable glyph that
needs to be displayed.
## Validation Steps Performed
I've manually tested that all the controls that are meant to be filtered
out are no longer being displayed.
I've also extended the existing `NUL` unit test to cover the full set of
controls characters that are supposed to be filtered.
Closes#10786
`til::linear_flat_set` is a primitive hash map with linear probing.
The implementation is slightly complicated due to the use of templates.
I've strongly considered just writing multiple copies of this class,
by hand since the code is indeed fairly trivial but ended up deciding
against it, because this templated approach makes testing easier.
This class is in the order of 10x faster than `std::unordered_map`.
I noticed this bug while resizing my window on my 150% scale display.
Every 3 "snaps" of the window size, it would fail to resize the text
buffer. I found that this occurs, because we convert the swap chain
size from a float into a double, which converts my 597.333313 height
into 597.33331298828125, which then multiplied by 1.5 results in
895.999969482421875. If you just cast this to an integer, it'll
result in a height of 895px instead of the expected 896px.
This PR addresses the issue in two ways:
* Replace casts to integers with `lrint` or `floor`, etc.
* Remove many of the redundant double <> float conversions.
## PR Checklist
* Resizing my window always resizes the text buffer ✅
## Summary of the Pull Request
This pull request adds support for holding the control key and clicking
the Open Terminal Here context menu item to elevate the request.
## References and Relevant Issues
#14810
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
## PR Checklist
- [x] Closes#14810
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
- [ ] Schema updated (if necessary)
---------
Co-authored-by: Mike Griese <migrie@microsoft.com>
C++ is a very well balanced and reasonable language, which is why
`static` inside classes means "shared between all instances", whereas
`static` outside of classes means "not shared between all .cpp files".
32 years after this problem was written onto parchment it was fixed with
the introduction of inline variables in C++17, which tell the compiler
to deduplicate variables the same way it deduplicates functions.
It can be costly, difficult, or often impossible to compare two
instances of a struct. This little helper can simplify this.
The underlying idea is that changes in state occur much less often than
the amount of data that's being processed in between. As such, this
helper assumes that _any_ modification to the struct it wraps is a
state change. When you compare the modified instance with another
the comparison operator will then always return false. This makes
state changes potentially more costly, because more state might be
invalidated than was necessary, but on the other hand it makes both,
the code simpler and the fast-path (no state change) much faster.
For instance, let's look at the amount of data that represents a
user's chosen font: It encompasses the font family, size and weight,
font axes (a vector of tuples), dpi and cell height/width overrides.
Comparing all that data, every time the user changes anything, is
fairly complex to code and maintain and costly at runtime, even though
the user will change the only font very seldomly. Instead, we can
optimize for the common case of no font changes occuring and simply
assume that if any font related field changed, all fields changed.
This is exactly what `til::generational` does.
Updates the Terminal to Microsoft.UI.Xaml v2.8.
* MUX 2.8 adds a dependency on WebView2, so we need to include parts of it too.
* See https://github.com/microsoft/microsoft-ui-xaml/pull/7574 for why
we're adding the `.props`
* The TabView thing:
> tl;dr: In >=MUX 2.7, we were updating our tab colors by doing a
"Visual State Dance", as I called it. We'd manually change the
`TabViewItem`'s VisualState to one that it wasn't in, then change it
back to the one it should be in. This seemingly re-applied the new
values of the brushes. However in 2.8, this seemingly didn't work
anymore!
>
> So instead, we do a "Theme Dance", like so:
> ```c++
> const auto& reqTheme = TabViewItem().RequestedTheme();
> TabViewItem().RequestedTheme(ElementTheme::Light);
> TabViewItem().RequestedTheme(ElementTheme::Dark);
> TabViewItem().RequestedTheme(reqTheme);
> ```
> This causes the `ThemeResource`s to be re-evaluated to the new values.
> We never got to the root cause of why this seems different in 2.8. It
literally makes no sense.
Closes#13495
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Rendering hyperlinks is unneccessarily complex at the moment, because
it requires you to implement `UpdateDrawingBrushes`, manually extract
the hyperlink flag from the given `TextAttribute` and save it until the
next call to `PaintBufferGridLines` which does not get that flag.
This isn't particularly clean as it assumes that `PaintBufferGridLines`
will be called after `UpdateDrawingBrushes` in the first place.
Instead, we can simply pass the hyperlink flag to `UpdateDrawingBrushes`
so that the renderers don't need to deal with this anymore.
## PR Checklist
* Hyperlinks show up with a dotted line ✅
* Hovering hyperlinks underline them ✅
This tool augments `vttest` by adding some things that are specific to
us (like non-VT console attributes), and some things `vttest` is
seemingly too old for (like emojis). I'm planning to add more "pages"
of tests to the application in the future, whenever the need arises.
Two PowerShell scripts were added so that developers new to the project
know if they have the wrong version of PowerShell installed.
When first building Terminal, it would continuously fail, and I didn't
really know why. I'm new to both this project and to open source, so
when I saw an error message about "pwsh.exe" not being found I was
confused and didn't know what went wrong. What I didn't know is that
Windows PowerShell and PowerShell Core had different names for
their .exe files, and since I had the latest version of Windows
PowerShell installed, I figured that I was completely set. So, once I
realized that Windows PowerShell (what I had installed) is
powershell.exe and PowerShell Core (what I needed to have installed) is
pwsh.exe, I downloaded PowerShell Core, and it built without issue. So,
in order to help other newbies, I made two scripts, `CheckPSVersion` and
`WindowsCheckPSVersion`, which make sure that PowerShell Core 7.0.0+ is
installed, outputting an error telling the developer to download Core
7.0.0+ if they have Windows PowerShell but not Core. These scripts are
run pre-build courtesy of `Microsoft.Terminal.Settings.ModelLib.vcxproj`
## Validation Steps Performed
Building with both Windows PowerShell and PowerShell core: builds
perfectly, no issues.
Building with Windows PowerShell but not PowerShell core: build fails,
but a nice error prints out that reminds the user to download the
correct version of PowerShell core.
Closes#14797
This pull request implements portable mode for Windows Terminal, which
will make side by side deployment of different versions generally more
feasible.
Portable mode was specified in #15032.
There are three broad categories of changes in this PR:
1. Changes to settings loading.
2. A new indicator in the settings UI plus a link to the portable mode
docs.
3. A new application display name, `Terminal (Portable)`, which users
will hopefully include in their bug reports.
It's surprisingly small for how big a deal it is!
Related to #15034Closes#1386
_This is the last one 🎉_
## Summary
_In the final chapter of our tale, we present a PR of great
significance. It grants the power to tear tabs from their windows and
create a new window where they may be dropped, one not necessarily of
the Terminal sort. The dimensions of the original window are transferred
to this new abode, and its placement on the screen is determined by the
user's placement of the tab._
_This is the last main chapter of the tear-out saga, and the dawning of
the new age._
Closes#5000
Related to #1256
## Detailed description
We're really leaning on the existing `RequestNewWindow` event that the
monarch already had - honestly, most of that was so simple that it could
have just been in the parent PRs. We just need to add new support for
passing in a content blob of json, and making sure the Terminal always
uses that over commandline args. Easy enough.
There's a bit of wackiness here in adjusting the positioning just right
so that the new window appears in the right place, but it feels...
pretty good all things considered.
Since the removal of the Win10-specific variant of the Terminal MSIX in
#15031, there has been no officially-sanctioned (or even unofficially
tested!) way to get an unzippable double-click-runnable version of
Windows Terminal.
Due to a quirk in the resource loading system, an unpackaged
distribution of Terminal needs to ship all of XAML's resources and all
of is own resources in a single `resources.pri` file. The tooling to
support this is minimal, and we were previously just coasting by on
Visual Studio's generosity plus how the prerelease distribution of XAML
embedded itself into the consuming package.
This pull request introduces a build phase plus a supporting script (or
three) that produces a ZIP file distribution of Windows Terminal when
given a Terminal MSIX and an XAML AppX.
The three scripts are:
1. A script to merge any number of PRI files and/or PRI dump files (made
with `makepri dump /dt detailed`)
2. A script that specifically merges XAML's resources with Terminal's.
This is necessary because the XAML package emits a couple PRI
resources into Terminal's resources _even when it is not
co-packaged._ We need to remove the conflicting resources.
3. Finally, a script to take a WT and XAML distribution and combine them
-- resources, files, everything -- and strip out the things that we
don't need. This script is an all-in-one that calls the other two and
produces a ZIP file at the end.
The final distribution is named after the PFN
(`Microsoft.WindowsTerminal`, or `...Preview` or `WindowsTerminalDev`),
the version number and the architecture. When expanded, it produces a
directory named `terminal-X.Y.Z.A` (version number.)
I've also added the build script to the release pipeline.
As a treat, this also produces an unpackaged distribution out of every
CI build... that way, contributors can download live deployable copies
of WT Unpackaged to test out their changes. Pretty cool.
Refs #1386
The main purpose of this PR was to merge the `ITerminalApi::LineFeed`
implementations into a shared method in `AdaptDispatch`, and avoid the
VT code path depending on the `AdjustCursorPosition` function (which
could then be massively simplified). This refactoring also fixes some
bugs that existed in the original `LineFeed` implementations.
## References and Relevant Issues
This helps to close the gap between the Conhost and Terminal (#13408).
This improves some of the scrollbar mark bugs mentioned in #11000.
## Detailed Description of the Pull Request / Additional comments
I had initially hoped the line feed functionality could be implemented
entirely within `AdaptDispatch`, but there is still some Conhost and
Terminal-specific behavior that needs to be triggered when we reach the
bottom of the buffer, and the row coordinates are cycled.
In Conhost we need to trigger an accessibility scroll event, and in
Windows Terminal we need to update selection and marker offsets, reset
pattern intervals, and preserve the user's scroll offset. This is now
handled by a new `NotifyBufferRotation` method in `ITerminalApi`.
But this made me realise that the `_EraseAll` method should have been
doing the same thing when it reached the bottom of the buffer. So I've
added a call to the new `NotifyBufferRotation` API from there as well.
And in the case of Windows Terminal, the scroll offset preservation was
something that was also needed for a regular viewport pan. So I've put
that in a separate `_PreserveUserScrollOffset` method which is called
from the `SetViewportPosition` handler as well.
## Validation Steps Performed
Because of the API changes, there were a number of unit tests that
needed to be updated:
- Some of the `ScreenBufferTests` were accessing margin state in the
`SCREEN_INFORMATION` class which doesn't exist anymore, so I had to add
a little helper function which now manually detects the active margins.
- Some of the `AdapterTest` tests were dependent on APIs that no longer
exist, so they needed to be rewritten so they now check the resulting
state rather than expecting a mock API call.
- The `ScrollWithMargins` test in `ConptyRoundtripTests` was testing
functionality that didn't previously work correctly (issue #3673). Now
that it's been fixed, that test needed to be updated accordingly.
Other than getting the unit tests working, I've manually verified that
issue #3673 is now fixed. And I've also checked that the scroll markers,
selections, and user scroll offset are all being updated correctly, both
with a regular viewport pan, as well as when overrunning the buffer.
Closes#3673
_Behold, the penultimate chapter in the saga of tear-out! This
significant update bestows upon the user the power to transport tabs
betwixt Terminal windows. Alas, the drag and drop capabilities of
TabView are not yet refined, so this PR primarily concerns itself with
the intricacies of plumbing. When a tab is extracted and deposited
elsewhere, it is necessary to have the recipient make an inquiry to the
Monarch, who in turn will beseech the sender to transmit the tab
content, akin to the act of moving a tab. Curious it may seem, but the
method has proven effective._
The penultimate tear-out PR. This PR enables the user to move tabs from
one Terminal window to another. The TabView drag/drop APIs have some
rough edges, so this PR is mostly plumbing. When a tab is drag/dropped,
we need to get the recipient to ask the Monarch to ask the sender to
send the tab content, like a MoveTab action. Wacky, but it works.
There's a LONG tail of UX gaps. Those I'm going to track in #14900. It
is more valuable for us to merge this now than to figure out workarounds
immediately.
The next PR will be the last main PR in this saga - in which we enable
dragging a tab out of the window and dropping to create a new window.
* Closes#1256
* Related to #5000
* Follow-ups get to go in #14900
## Detailed description
As I mentioned, it's mostly plumbing. The order that we get tab drag
events is... unfortunate... for our use case. So we do a lot of sending
`RequestReceiveContentArgs` up and down between windows, just to
communicate who the tab was dropped on to whomever the tab was dragged
from.
There's a diagram for this that I originally put in
https://github.com/microsoft/terminal/issues/5000#issuecomment-1435328038:
```mermaid
sequenceDiagram
participant Source
participant Target
participant Monarch
Note Left of Source: _onTabDragStarting
Source --> Source: stash dragged content
Source --> Source: pack window ID into DataPackage
Source ->> Target: Drag tab
Note right of Target: _onTabStripDragOver
Target ->> Target: AcceptedOperation(DataPackageOperation::Move)
Source --> Target: Release mouse (to drop)
Note right of Target: _onTabStripDrop
Target --> Target: get WindowID from DataPackage
Target -) Monarch: Request that WindowID sends content to us<br>RequestRecieveContent
Monarch -) Source: Tell to send content to Target.Id<br>RequestSendContent, SendContent
Source --> Source: detach our content
Source -) Monarch: RequestMoveContent(stashed, target.id)
Monarch -) Target: AttachContent(stashed)
# Target -->> Source:
# Note Left of Source: TabViewTabDragStartingEventArgs<br>.OperationCompleted
# Note Left of Source: _onTabDroppedCompleted
```
Really really though, let's try to avoid nits about the UX at this time.
This PR works with what we've got. Mail threads are percolating. I've
got 19 chapters worth of Hobbit branch names to use for those follow
ups.
_Lo! Harken to me, for I shall divulge the heart of the tab tear-out
saga. Verily, this PR shall bestow upon thee the power to move tabs and
panes between windows by means of pre-defined actions. Though be warned,
it does not yet grant thee the power to drag and drop them as thou
mayest desire. Yet, the same plumbing that underpins this work shall
remain steadfast. Behold, the majority of this undertaking concerns the
elevation of the RequestMoveContent event from the TerminalPage to the
very summit of the Monarch. From thence, a great AttachContent method
shall descend back to the lowest depths. Furthermore, there are minor
revisions to TermControl that shall enable thee to better detach the
content and attach it to a new one._
This is the most important part of the tab tear-out saga. This PR
enables the user to move tabs and panes between windows using
pre-defined actions. It does _not_ enable the user to drag/drop them
yet, but the same fundamental plumbing will still apply. Most of the PR
is plumbing the `RequestMoveContent` event up from the `TerminalPage` up
to the `Monarch`, and then plumbing an `AttachContent` method back down.
There are also small changes to `TermControl` to better support
detaching the content and attaching to a new one.
For testing, I recommend:
```json
{ "keys": "f1", "command": { "action": "moveTab", "window": "1" } },
{ "keys": "f2", "command": { "action": "moveTab", "window": "2" } },
{ "keys": "f3", "command": { "action": "movePane", "window": "1" } },
{ "keys": "f4", "command": { "action": "movePane", "window": "2" } },
{ "keys": "shift+f3", "command": { "action": "movePane", "window": "1", "index": 3 } },
{ "keys": "shift+f4", "command": { "action": "movePane", "window": "2", "index": 3 } },
```
* Related to #1256
* Related to #5000
---------
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
When saving and restoring the cursor position with origin mode enabled,
we originally matched the behavior of the early DEC terminals, which
stored the position as an absolute offset. But if the margin boundaries
were changed prior to restoring the position, that could result in the
cursor being outside the margins, potentially with negative coordinates.
Our implementation avoided that bug by clamping the coordinates back
into range, but that's not how DEC ultimately fixed the issue. Starting
with the VT420, they began using relative coordinates (i.e. relative to
the margin origin), so a restored position could never end up negative.
This PR updates our implementation to match that newer behavior.
## Validation Steps Performed
Thank to testing performed by @al20878, we know this was the algorithm
used on the VT420, VT520, and VT525, and I've manually confirmed that
our implementation now matches their behavior.
I've also updated the `CursorSaveRestore` unit test which previously
covered our clamping behavior - it's now being used to confirm that
we're correctly using relative offsets when restoring the cursor.
Closes#15048
[Flexible Virtualization] is a little more restrictive than
`unvirtualizedResources`, but it's more descriptive and stands a chance
of working on Windows 10.
This makes `unvirtualizedResources` actually work for us - we can tell
the system exactly which registry keys we want to use. This is required
for our registry writes to work on Windows 10.
[Flexible Virtualization]:
https://learn.microsoft.com/en-us/windows/msix/desktop/flexible-virtualization
This regression is caused by 0eff8c0. It previously said `.Y` here.
I went through the diff again and found no other width/height mistake.
Closes#14762Closes#15043
This adds PR adds a couple foundational functions and classes to make
our TextBuffer more performant and allow us to improve our Unicode
correctness in the future, by getting rid of our dependence on
`OutputCellIterator`. In the future we can then replace the simple
UTF-16 code point iterator with a proper grapheme cluster iterator.
While my focus is technically on Unicode correctness, the ~4x VT
throughput increase in OpenConsole is pretty nice too.
This PR adds:
* A new, simpler ROW iterator (unused in this PR)
* Cursor movement functions (`NavigateToPrevious`, `NavigateToNext`)
They're based on functions that align the cursor to the start/end
of the _current_ cell, so such functions can be added as well.
* `ReplaceText` to write a raw string of text with the possibility to
specify a right margin.
* `CopyRangeFrom` will allow us to make reflow much faster, as it's able
to bulk-copy already measured strings without re-measuring them.
Related to #8000
## Validation Steps Performed
* enwik8.txt, zhwik8.txt, emoji-test.txt, all work with proper
wide glyph reflow at the end of a row ✅
* This produces "a 咪" where only "a" has a white background:
```sh
printf '\e7こん\e8\x1b[107ma\x1b[m\n'
```
* This produces "abん":
```sh
stdbuf -o0 printf '\x1b7こん\x1b8a'; printf 'b\n'
```
* This produces "xy" at the end of the line:
```sh
stdbuf -o0 printf '\e[999C\bこ\bx'; printf 'y\n'
```
* This produces red whitespace followed by "こ " in the default
background color at the end of the line, and "ん" on the next line:
```sh
printf '\e[41m\e[K\e[m\e[999C\e[2Dこん\n'
```
We ship a separate package to Windows 10, which contains a copy of XAML
embedded in it, because of a bug in activating classes from framework
packages while we're elevated.
We did this to avoid wasting disk space on Windows 11 installs (which is
critical given that we're preinstalled in the Windows image.)
The fix for this issue was released in a servicing update in April 2022.
Thanks to KB5011831, we no longer need this workaround!
And finally, this means that we no longer need to depend on a copy of
"pre-release" XAML. We only did that because it would copy all of its
assets into our package.
Introduced in #12560Closes#14106
Closes (discussion) #14981
Reverts #14660
* These `Icon` bindings were to `Profile`s which aren't Observable, but
it also doesn't matter
* More c# warnings
hopefully we'll just jump straight to real errors now.
If we get initialized with a window name, this will be called before
XAML is stood up, and constructing a PropertyChangedEventArgs will
throw. So don't.
Regressed in #14843
Related to #5000, #14957
This PR introduces two new sequences, `DECRQPSR` and `DECRSPS`, which
provide a way for applications to query and restore the presentation
state reports. This includes the tab stop report (`DECTABSR`) and the
cursor information report (`DECCIR`).
One part of the cursor information report contains the character set
designations and mapped G-sets. But we weren't tracking that data in a
way that could easily be reported, so I needed to do some refactoring in
the `TerminalOutput` class to make that accessible.
Other than that, the rest was fairly straightforward. It was just a
matter of packaging up all the information into the correct format for
the returned `DCS` string, and in the case of the restore operations,
parsing the incoming data and applying the new state.
## Validation Steps Performed
Thanks to @al20878, we were able to test these operations on a real
VT525, and I've manually verified that our implementation matches that
behavior. I've also added some unit tests covering both reports.
Closes#14984
When a `DECCRA` operation is copying content that spans a double width
line, it's possible that some range of the bounding rectangle will be
off-screen, and that range is not supposed to be copied. However, the
code checking for off-screen positions was using incorrect coordinates,
so we would mistakenly copy content that shouldn't be copied, and drop
content that should have been copied. This PR fixes that.
## References and Relevant Issues
This was a regression introduced in PR #14650 when fixing an issue with
horizontal scrolling of DBCS characters.
## Validation Steps Performed
I manually verified this fixes the test case in #15019, and I've also
added a unit test that replicates that case.
Closes#15019
## Summary of the Pull Request
PR adds functionality to enable or disable readOnly mode within panes.
This functionality is different to toggling as if you call the same
functionality twice, it will not toggle between states.
## References and Relevant Issues
- Closes https://github.com/microsoft/terminal/issues/14415
- Documentation https://github.com/MicrosoftDocs/terminal/pull/645
## Validation Steps Performed
- Checked readOnly is enabled when command triggered
- Checked readOnly is enabled when command triggered while read only
already enabled
- Checked readOnly is disabled when command triggered while read only is
enabled
- Checked readOnly stays disabled when command triggered while read only
is disabled
- Checked above with multiple tabs and split panes
## PR Checklist
- [ ] Closes#14415
- [X] Tests added/passed
- [x] Documentation updated
- If checked, please file a pull request on [our docs
repo](https://github.com/MicrosoftDocs/terminal) and link it here:
https://github.com/MicrosoftDocs/terminal/pull/645
- [X] Schema updated (if necessary)
---------
Co-authored-by: Mike Griese <migrie@microsoft.com>
## Summary
_Thus we come to the introduction of a new servant, the
`ContentManager`, a singular entity that serves at the behest of the
`emperor`. It is its charge to keep track of all `TermControl` instances
created by the windows, for each window must seek its blessing before
calling forth such an instance._
_With the aid of the `ContentManager`, the `TermControl` shall now be
traced by the hand of fate through the use of unique identifying marks,
known as `GUID`s. Yet, its purpose remains yet unknown, for it is merely
a waypoint upon the journey yet to come._
_This act of bridging also brings a change to the handling of events
within the `TermControl`. This change shall see the addition of a
revoker, similar to the manner in which the `AppHost` hath employed it,
to the `TermControl`. Additionally, there is a new layer of indirection
between the `ControlCore` and the `App` layer, making ready for the day
when the `TermControl` may be repositioned and re-parented with ease._
_Consider this but a trivial act, a mere shadow of things yet to come,
for its impact shall be felt but briefly, like the passing of a gentle
breeze._
Related to #5000
Related to #1256
# Detailed description
This PR is another small bridge PR between the big work in #14843, and
the PR that will enable panes to move between windows.
This introduces a new class, called `ContentManager`. This is a global
singleton object, owned by the emperor. Whenever a window wants to
instantiate a new `TermControl`, it must ask the ContentManager to give
it one. This allows the ContentManager to track each "content" by GUID.
That's it. We don't do anything with them in this PR by itself, we just
track them.
This also includes a small change to the way TermControl events are
handled. It adds an `AppHost`-like revoker struct, and weak_ref's all
the handlers. We also add a layer of indirection between the
ControlCore's raising of events and the App layer's handling. This will
make reparenting content easier in the future.
This is a pretty trivial change which shouldn't have any major side
effects. Consider it exposition of the things to come. It's
intentionally small to try and keep the reviews more managable.
Due to a limitation in the Windows App Installer UI, Terminal had to
shell out to `reg.exe` to write the Delegation registry keys. The team
in charge of AppInstaller lifted that (once by-policy) limitation.
Therefore, we can remove our BODGY workaround.
It was brought to my attention that we should be more restrictive in
which tasks we ovver a GitHub token to. Sorry!
With thanks to sitiom for the version parsing and the magic GitHub
action syntax incantation for determining what is a prerelease.
## Summary
_In the days of old, the windows were sundered, each with its own
process, like the scattered stars in the sky. But a new age hath dawned,
for all windows now reside within a single process, like the bright gems
of a single crown._
_And lo, there came the `WindowEmperor`, a new lord to rule over the
global state, wielding the power of hotkeys and the beacon of the
notification icon. The `WindowManager` was cast aside, no longer needed
to seek out other processes or determine the `Monarch`._
_Should the `WindowEmperor` determine that a new window shall be raised,
it shall set forth a new thread, born from the ether, to govern this new
realm. On the main thread shall reside a message loop, charged with the
weighty task of preserving the global state, guarded by hotkeys and the
beacon of the notification icon._
_Each window doth live on its own thread, each guarded by the new
`WindowThread`, a knightly champion to hold the `TerminalWindow`,
`AppHost`, and `IslandWindow` in its grasp. And so the windows shall run
free, no longer burdened by their former ways._
All windows are now in a single process, rather than in one process per
window. We'll add a new `WindowEmperor` class to manage global state
such as hotkeys and the notification icon. The `WindowManager` has been
streamlined and no longer needs to connect to other processes or
determine a new `Monarch`. Each window will run on its own thread, using
the new `WindowThread` class to encapsulate the thread and manage the
`TerminalWindow`, `AppHost`, and `IslandWindow`.
* Related to #5000
* Related to #1256
## Windows Terminal Process Model 3.0
Everything is now one process. All the windows for a single Terminal
instance live in a singular Terminal process. When a new terminal
process launches, it will still attempt to communicate with an existing
one. If it finds one, it'll pass the commandline to that process and
exit. Otherwise, it'll become the "monarch" and create a new window.
We'll introduce a new abstraction here, called the `WindowEmperor`.
`Monarch` & `Peasant` will still remain, for facilitating cross-window
communication. The Emperor will allow us to have a single dedicated
class for all global state, and will now always represent the "monarch"
(rather than our previously established non-deterministic monarchy to
elevate a random peasant to the role of monarch). We still need to do a
very minimal amount of x-proc calls. Namely, one right on startup, to
see if another `Terminal.exe` was already running. If we find one, then
we toss our commandline at it and bail. If we don't, then we need to
`CoRegister` the Monarch still, to prepare for subsequent launches to
send commands to us.
`WindowManager` takes the most changes here. It had a ton of logic to
redundantly attempt to connect to other monarchs of other processes, or
elect a new one. It doesn't need to do any of that anymore, which is a
pretty dramatic change to that class.
This creates the opportunity to move some lifetime management around.
We've played silly games in the past trying to have individual windows
determine if they're the singular monarch for global state.
`IslandWindow`s no longer need to track things like global hotkeys or
the notification icon. The emperor can do that - there's only ever one
emperor. It can also own a singular copy of the settings model, and hand
out references to each other thread.
Each window lives on separate threads. We'll need to separately
initialize XAML islands for each thread. This is totally fine, and
actually supported these days. We'll use a new class called
`WindowThread` to encapsulate one of these threads. It'll be responsible
for owning the `TerminalWindow`, `AppHost` and `IslandWindow` for a
single thread.
This introduces new classes of bugs we'll need to worry about. It's now
easier than ever to have "wrong thread" bugs when interacting with any
XAML object from another thread. A good case in point - we used to stash
a `static` `Brush` in `Pane`, for the color of the borders. We can't do
that anymore! The first window will end up stashing a brush from its
thread. So now when a second window starts, the app explodes, because
the panes of that window try to draw their borders using a brush from
the wrong thread.
_Another fun change_: The keybinding labels of the command palette.
`TerminalPage` is the thing that ends up expanding iterable `Command`s.
It does this largely with copies - it makes a new `map`, a new `vector`,
copies the `Command`s over, and does the work there before setting up
the cmdpal.
Except, it's not making a copy of the `Command`s, it's making a copy of
the `vector`, with winrt objects all pointing at the `Command` objects
that are ultimately owned by `CascadiaSettings`.
This doesn't matter if there's only one `TerminalPage` - we'll only ever
do that once. However, now there are many Pages, on different threads.
That causes one `TerminalPage` to end up expanding the subcommands of a
`Command` while another `TerminalPage` is ALSO iterating on those
subcommands.
_Emperor message window_: The Emperor will have its own HWND, that's
entirely unrelated to any terminal window. This window is a
`HWND_MESSAGE` window, which specifically cannot be visible, but is
useful for getting messages. We'll use that to handle the notification
icon and global hotkeys. This alleviates the need for the IslandWindow
to raise events for the tray icon up to the AppHost to handle them. Less
plumbing=more good.
### Class ownership diagram
_pretend that I know UML for a second_:
```mermaid
classDiagram
direction LR
class Monarch
class Peasant
class Emperor
class WindowThread
class AppHost
Monarch "1" --o "*" Peasant: Tracks
Emperor --* "1" AppLogic:
Monarch <..> "1" Emperor
Peasant "1" .. "1" WindowThread
Emperor "1" --o "*" WindowThread: Tracks
WindowThread --* AppHost
AppHost --* IslandWindow
AppHost --* TerminalWindow
TerminalWindow --* TerminalPage
```
* There's still only one `Monarch`. One for the Terminal process.
* There's still many `Peasant`s, one per window.
* The `Monarch` is no longer associated with a window. It's associated
with the `Emperor`, who maintains _all_ the Terminal windows (but is not
associated with any particular window)
* It may be relevant to note: As far as the `Remoting` dll is concerned,
it doesn't care if monarchs and peasants are associated with windows or
not. Prior to this PR, _yes_, the Monarch was in fact associated with a
specific window (which was also associated with a window). Now, the
monarch is associated with the Emperor, who isn't technically any of the
windows.
* The `Emperor` owns the `App` (and by extension, the single `AppLogic`
instance).
* Each Terminal window lives on its own thread, owed by a `WindowThread`
object.
* There's still one `AppHost`, one `IslandWindow`, one `TerminalWindow`
& `TerminalPage` per window.
* `AppLogic` hands out references to its settings to each
`TerminalWindow` as they're created.
### Isolated Mode
This was a bit of a tiny brainstorm Dustin and I discussed. This is a
new setting introduced as an escape watch from the "one process to rule
them all" model. Technically, the Terminal already did something like
this if it couldn't find a `Monarch`, though, we were never really sure
if that hit. This just adds a setting to manually enable this mode.
In isolated mode, we always instantiate a Monarch instance locally,
without attempting to use the `CoRegister`-ed one, and we _never_
register one. This prevents the Terminal from talking with other
windows.
* Global hotkeys won't work right
* Trying to run commandlines in other windows (`wt -w foo`) won't work
* Every window will be its own process again
* Tray icon behavior is left undefined for now.
* Tab tearout straight-up won't work.
### A diagram about settings
This helps explain how settings changes get propagated
```mermaid
sequenceDiagram
participant Emperor
participant AppLogic
participant AppHost
participant TerminalWindow
participant TerminalPage
Note Right of AppLogic: AL::ReloadSettings
AppLogic ->> Emperor: raise SettingsChanged
Note left of Emperor: E::...GlobalHotkeys
Note left of Emperor: E::...NotificationIcon
AppLogic ->> TerminalWindow: raise SettingsChanged<br>(to each window)
AppLogic ->> TerminalWindow:
AppLogic ->> TerminalWindow:
Note right of TerminalWindow: TW::UpdateSettingsHandler
Note right of TerminalWindow: TW::UpdateSettings
TerminalWindow ->> TerminalPage: SetSettings
TerminalWindow ->> AppHost: raise SettingsChanged
Note right of AppHost: AH::_HandleSettingsChanged
```
[The winget-releaser action] automatically generates manifests for the
[Winget Community Repository] and submits them.
I suggest adding Dependabot to keep the action up to date. There were
many cases where the action was failing due to an outdated version.
Closes#14795
[The winget-releaser action]:
https://github.com/vedantmgoyal2009/winget-releaser
[Winget Community Repository]: https://github.com/microsoft/winget-pkgs
Credit where credit is due - @jboelter did literally all the hard work.
I just separated this out to two elements:
* Are we running elevated?
* Can we drag drop?
As we learned in #7754, the builtin administrator _can_ drag drop. But
critically, they are also running as admin! The way we had this logic
before, we're treat them as unelevated, because we had been overloading
the meaning here.
This splits these into two separate functions. Comes with the added
benefit of re-adding the elevation shield to the Terminal window for
users with UAC disabled (which was missing before) (and can _still_ be
disabled).
Closes#13928
Tested on a Win10 VM with `EnableLua=0`
#14745 contains two regressions related to console alias handling:
* When `ProcessAliases` expands the backup buffer into (an) aliased
command(s) it changes the `_bytesRead` field of `COOKED_READ_DATA`,
requiring us to re-read it and reconstruct the `input` string-view.
* Multiline aliases are read line-by-line whereas #14745 didn't treat
them any different from regular single-line inputs.
## Validation Steps Performed
In `cmd.exe` run
```
doskey test=echo foo$Techo bar$Techo baz
test
```
The output should look exactly like this:
```
C:\>doskey test=echo foo$Techo bar$Techo baz
C:\>test
foo
C:\>bar
C:\>baz
C:\>
```
This PR adds support for querying the color indices set by the `DECAC`
control, using the existing `DECRQSS` implementation.
## References and Relevant Issues
The initial `DECRQSS` support was added in PR #11152.
The `DECAC` functionality was added in PR #13058, but at the time we
didn't know how to format the associated `DECRQSS` query.
## Detailed Description of the Pull Request / Additional comments
For most `DECRQSS` queries, the setting being requested is identified by
the final characters of its escape sequence. However, for the `DECAC`
settings, you also need to include a parameter value, to indicate which
color item you're querying.
This meant we needed to extend the `DECRQSS` parser, so I also took this
opportunity to ensure we correctly parsed any parameter prefix chars. We
don't yet support any setting requiring a prefix, but this makes sure we
don't respond incorrectly if an app does query such a setting.
## Validation Steps Performed
Thanks to @al20878, we've been able to test how these queries are parsed
on a real VT525 terminal, and I've manually verified our implementation
matches that behavior.
I've also extended the existing `DECRQSS` unit test to confirm that we
are responding to the `DECAC` queries as expected.
Closes#13091
Experimental for now. `experimental.rightClickContextMenu`, a
per-profile setting. Long term we want to enable full mouse bindings, at
which point this would be replaced.
Closes#3337
This adds **two** context menus to the `TermControl` - one for
right-clicking with a selection, and one without. The implementation is
designed to follows the API experience of the context menu on something
like a [`RichEditBox`](winui2gallery://item/RichEditBox). The hosting
application adds a handler for the menu's `Opening` event, and appends
whatever items it wants at that time.
So `TermControl` only implements a few "actions" by default - copy,
past, find. `TerminalApp` is then responsible for adding anything else
it needs. Right now, those actions are:
* Duplicate tab
* Duplicate pane
* Close Tab
* Close pane
Screenshots in
https://github.com/microsoft/terminal/pull/14775#issuecomment-1415737393
Azure Devops jumps to these as the first "error" when you open a failing
build. But these are warnings, not errors. So you're left hunting for
the real error. _If only someone had scrollbar marks for indicating
lines with error messages..._
May as well clean them up.
Adds a global setting `compatibility.reloadEnvironmentVariables` with a
default value of `true`. When set, during connection creation a new
environment block will be generated to ensure it has the latest
environment variables.
Closes#1125
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
Does two things related to URLs emitted via OSC8.
* Allows `wsl$` and `wsl.localhost` as the hostname in `file://` URIs
* Generally allows _all_ URIs that parse as a URI.
The relevant security comments: https://github.com/microsoft/terminal/pull/7526#issuecomment-764160208
> this doesn't let a would-be attacker specify command-line arguments (ala "cmd.exe /s /c do_a_bad_thing") (using somebody else's reputation to cause mayhem)
>
> `ShellExecute` de-elevates because it bounces a launch request off the shell
>
> "Works predictably for 15% of applications" (h/t to PhMajerus' AXSH, and other on-Windows requestors) is better in so many ways than "Works for 0% of applications", in my estimation. Incremental progress 😄 while we work on features that'll make it even more broadly applicable.
Closes#10188Closes#7562
_And so begins the first chapter in the epic tale of the Terminal's tab
tear-out. This commit, though humble in its nature, shall mark the
beginning of a grand journey._
_This initial offering, though small in its scope, doth serve to divide
the code that currently resides within TerminalPage and AppLogic, moving
it unto a new entity known as TerminalWindow. In the ages to come, these
classes shall take on separate responsibilities, each with their own
purpose._
_The AppLogic shall hold sway over the entire process, shared among all
Terminal windows, while the AppHost, TerminalWindow, and TerminalPage
shall rule over each individual window._
_This pull request prepares the way for the future, moving state that
pertains to the individual windows into the TerminalWindow. This is a
task of great labor, for it requires moving much code, but the end
result shall bring greater organization to the codebase._
_And so the stage is set, for in the next pull request, the Process
Model v3 shall be revealed, unifying all Terminal windows into a single
process, a grand accomplishment indeed._
_courtesy of G.P.T. Tolkien_
<details>
<summary>Or, as I wrote it originally. </summary>
This is the first of the commits in the long saga which will culminate
in tab tear-out for the Terminal.
This the most functionally trivial of the PRs. It mostly just splits up
code that's currently in TerminalPage & AppLogic, and moves it into a
new class `TerminalWindow`. In the future, these classes will separate
responsibility as such:
* There will be one `AppLogic` per process, shared across all Terminal
windows.
* There will be one `AppHost`, `TerminalWindow`, and `TerminalPage` for
each individual window in the process.
This PR prepares for that by moving some state that's applicable to
_individual windows_ into `TerminalWindow`. This is almost exclusively a
code moving PR. There should be minimal functional changes.
</details>
In the next PR, we'll introduce the actual "Process Model v3", merging
all Terminal windows into a single terminal process.
Related to #5000. See
https://github.com/Microsoft/terminal/issues/5000#issuecomment-1407110045
for my current todo list.
Related to #1256.
These commits are all artificially broken down pieces. Honestly, I don't
want to really merge them till they're all ready, so we know that the
work e2e. This my feigned attempt to break it into digestable PRs.
Lightly manually tested, things seem to still all work? Most of this
code was actually written in deeper branches, it was only today I
realized it all needed to come back to this branch.
* [x] The window persistence fishy-ness of the subsequent PR isn't
present here. So that's something.
* [x] Localtests still pass
### Detailed description
> Q: Does `AppLogic` not keep track of its windows?
Sure doesn't! I didn't think that was something it needed to know.
>Q: Why does `TerminalWindow` (per-window) have access to the
commandline args (per-process)
It's because it's _not_ per process. Commandline args _are_ per-window.
Consider - you launch the Terminal, then run a `wt -w -1 -- foo`. That
makes its own window. In this process, yes. But that new window has its
own commandline args, separate from the ones that started the original
process.
The `Sample` method has an offset parameter which we can use here.
The result is not identical to the old shader, as the older shader
used the height of the terminal for drawing horizontal edges and so
the result looked way fatter than it was seemingly originally intended.
On my 150% scale display I found an offset of +/- 2px to produce an
acceptable result, although in the future it might be worthwhile to
make the offset dependent on the UI scale.
Closes#14953
## Summary of the Pull Request
This fixes a couple of audit failures in `TerminalCore` where the
compiler was complaining about functions that should have been declared
as `noexcept`.
These failures have actually existed for a while, but you'd only see
them if you ran the audit build locally. They only recently started
showing up on the CI build server - I'm guessing because the compiler
there has now been upgraded.
## Validation Steps Performed
Compiled the audit build locally and it no longer fails.
I have been working feverishly to remove the use of undefined macros used in sources\dirs files (such as this one SDKTOOLS_INC_PATH) that our telemetry constantly catches and reports as an issue.
Related work items: MSFT-40126326
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 8589e01e23c4ec64ad270dbf0c1beb8a78b5a833
This PR implements the `DECRQCRA` escape sequence, which lets you
request a checksum of a portion of the screen. This is most useful in
automated testing to verify that the generated screen content is what it
was expected to be.
For now this functionality is gated behind a feature flag which is only
enabled for dev builds.
## Detailed Description of the Pull Request / Additional comments
I've done my best to match the DEC checksum algorithm as closely as
possible, which we've determined by testing on a real VT525 terminal
(many thanks to @al20878 for that).
The checksum is an unsigned 16-bit value that starts off at zero, and
from which you then subtract the ordinal value of every character in the
selected range. It's also affected by the rendition attributes in the
selected cells.
* Bold/Intense - subtract 0x80
* Blinking - subtract 0x40
* Reverse video - subtract 0x20
* Underlined - subtract 0x10
* Invisible - subtract 0x08
* Protected - subtract 0x04
* Background color - subtract the color index
* Foreground color - subtract the color index * 0x10
I should note that our ordinal calculation only matches DEC for the
characters in the ASCII and Latin-1 range, because the original
algorithm predates Unicode. If we want to support the other character
sets correctly we'll need custom mapping tables, but I didn't think that
was essential for now.
It's also worth mentioning that we don't handle "empty" cells correctly,
but that's not the fault of the checksum calculation - it's just that
our default fill character is a space rather than a `NUL`.
## Validation Steps Performed
I've manually compared our implementation against the tests results that
@al20878 got from the VT525, and confirmed that we match as well as was
expected (i.e. taking into account the limitations mentioned above).
I've also added a few basic unit tests that verify we're generating the
expected checksums for the various renditions and color attributes.
Closes#14974
Adds a helper that replicates how the `RegenerateUserEnvironment()`
method in `shell32.dll` behaves.
* Raises #12516 from the dead.
* Half of #1125
Co-authored-by: Michael Niksa <miniksa@microsoft.com>
A customer reports that `wil::get_token_information` and its use of `wistd::unique_ptr<T>` is hitting a code analysis error in that dynamically-sized token information blocks are allocated with `operator new` but deleted with `delete T*`. This is a "mismatched allocator" error and should be removed.
## What changed?
The output type of token information changed from `wistd::unique_ptr<T>` to `wil::unique_tokeninfo_ptr<T>` which has a custom deleter that uses `operator delete(p)` to match the allocator.
As the new type is incompatible with the old type, all call sites for `wil::GetTokenInformation` were updated to use the new type.
## How was the change tested?
1. Ran the WIL unit tests
2. Prime build of impacted directories
Related: https://github.com/microsoft/wil/pull/306
Related: https://github.com/microsoft/wil/issues/276
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 d86d562b7559c2ca8de036085de6e52e80da8c93
I have been working feverishly to remove the use of undefined macros used in
sources\dirs files (such as this one ONECORE_PRIV_SDK_INC_PATH) that our
telemetry constantly catches and reports as an issue.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 bb08e422cfb4dc2f8b99a2c34bac67a61654a572
Related work items: MSFT-40126326
When a character is written in the last column of a row, the cursor
doesn't move, but instead sets a "delayed EOL wrap" flag. If another
character is then output while that flag is still set, the cursor moves
to the start of the next line, before writing to the buffer.
That flag is supposed to be reset when certain control sequences are
executed, but prior to now we haven't always handled that correctly.
With this PR, we should be resetting the flag appropriately in all the
places that it's expected to be reset.
For the most part, I'm following the DEC STD 070 reference, which lists
a bunch of operations that are intended to reset the delayed wrap flag:
`DECSTBM`, `DECSWL`, `DECDWL`, `DECDHL`, setting `DECCOLM` and `DECOM`,
resetting `DECCOLM`, `DECOM`, and `DECAWM`, `CUU`, `CUD`, `CUF`, `CUB`,
`CUP`, `HVP`, `BS`, `LF`, `VT`, `FF`, `CR`, `IND`, `RI`, `NEL`, `ECH`,
`DCH`, `ICH`, `EL`, `DECSEL`, `DL`, `IL`, `ED`, and `DECSED`.
We were already resetting the flag for any of the operations that
performed cursor movement, since that always triggers a reset for us.
However, I've now also added manual resets in those ops that weren't
moving the cursor.
Horizontal tabs are a special case, though. Technically the standard
says they should reset the flag, but most DEC terminals never followed
that rule, and most modern terminals agree that it's best for a tab to
leave the flag as it is. Our implementation now does that too.
But as mentioned above, we automatically reset the flag on any cursor
movement, so the tab operation had to be handled as a special case,
saving and restoring the flag when the cursor is updated.
Another flaw in our implementation was that we should have been saving
and restoring the flag as part of the cursor state in the `DECSC` and
`DECRC` operations. That's now been fixed in this PR too.
I should also mention there was a change I had to make to the conpty
renderer, because it was sometimes using an `EL` sequence while the
terminal was in the delayed EOL wrap state. This would reset the flag,
and break subsequent output, so I've now added a check to prevent that
from happening.
## Validation Steps Performed
I've added some unit tests that confirm the operations listed above are
now resetting the delayed EOL wrap as expected, and I've expanded the
existing `CursorSaveRestore` test to make sure the flag is being saved
and restored correctly.
I've also manually confirmed that the test case in issue #3177 now
matches XTerm's output, and I've confirmed that the results of the
wraptest script[^1] now match XTerm's results.
[^1]: https://github.com/mattiase/wraptest/Closes#3177
The overarching intention of this PR is to improve our Unicode support.
Most
of our APIs still don't support anything beyond UCS-2 and DBCS
sequences.
This commit doesn't fix the UTF-16 support (by supporting surrogate
pairs),
but it does improve support for UTF-8 by allowing longer `char`
sequences.
It does so by removing `TranslateUnicodeToOem` which seems to have had
an almost
viral effect on code quality wherever it was used. It made the
assumption that
_all_ narrow glyphs encode to 1 `char` and most wide glyphs to 2
`char`s.
It also didn't bother to check whether `WideCharToMultiByte` failed or
returned
a different amount of `char`s. So up until now it was easily possible to
read
uninitialized stack memory from conhost. Any code that used this
function was
forced to do the same "measurement" of narrow/wide glyphs, because _of
course_
it didn't had any way to indicate to the caller how much memory it needs
to
store the result. Instead all callers were forced to sorta replicate how
it
worked to calculate the required storage ahead of time.
Unsurprisingly, none of the callers used the same algorithm...
Without it the code is much leaner and easier to understand now. The
best
example is `COOKED_READ_DATA::_handlePostCharInputLoop` which used to
contain 3
blocks of _almost_ identical code, but with ever so subtle differences.
After
reading the old code for hours I still don't know if they were relevant
or not.
It used to be 200 lines of code lacking any documentation and it's now
50 lines
with descriptive function names. I hope this doesn't break anything, but
to
be honest I can't imagine anyone having relied on this mess in the first
place.
I needed some helpers to handle byte slices (`std::span<char>`), which
is why
a new `til/bytes.h` header was added. Initially I wrote a `buf_writer`
class
but felt like such a wrapper around a slice/span was annoying to use.
As such I've opted for freestanding functions which take slices as
mutable
references and "advance" them (offset the start) whenever they're read
from
or written to. I'm not particularly happy with the design but they do
the job.
Related to #8000Fixes#4551Fixes#7589Fixes#8663
## Validation Steps Performed
* Unit and feature tests ✅
* Far Manager ✅
* Fixes test cases in #4551, #7589 and #8663✅
This just removes some leftover code that I forgot to remove before the merge.
Additionally I forgot to add a newly added file to our `sources` build file.
Woops. Closes#14878
## Validation Steps Performed
* Font Family: Iosevka Term (v19.0.1)
* Font Size: 11pt (or 10px cell height in conhost)
* Display Scale: 100%
* "--------------" leaves no gap between the text and the cursor ✅
Our templates were declared in the wrong order in JsonUtils, so all we
needed to do was reorder them. The tests bear this out.
This allows us to disable two-phase template name lookup. I also fixed a
minor issue that resulted in the inclusion of too many copies of
expandIconPath.
Interesting things we could do after this:
- remove all `InitializeComponent` calls - they do it automatically
- have some Clang support (!)
- use `std::optional`<->`IReference` automatic binding
- use `std::format` support (!) for json/uri/hostname/http stuff/all
`IStringable`s
- potentially move to `/await:strict` for C++20 coroutines
I've also fixed up a couple ambiguities introduced by this change.
* `lld-link` is more strict about the casing of keywords in `.def` files
* `[[nodiscard]]` must come before `virtual` and `static` qualifiers
* `precomp.h` is never to be included with `<>`
* We were calling the jsoncpp constructors directly (oops) as functions
(oops)
* ClipboardTests constructed `KeyEvent`s by copy instead of directly
* While we can `await` a `Dispatcher`, it's clearer to add `resume_foreground`
#13626 contains a small "regression" compared to #13321:
It now began to store trailers in the buffer wherever possible to allow
a region
of the buffer to be backed up and restored via Read/WriteConsoleOutput.
But we're unfortunately still ill-equipped to handle anything but UCS-2
via
WriteConsoleOutput, so it's best to again ignore trailers just like in
#13321.
## Validation Steps Performed
* Added unit test ✅
"Leak in font object 1952 times in last 2k GDI objects created, that lead console to run out of GDI objects."
Fixes MSFT-42906562
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 44f47bf7dbe4bff1986ba5fd8940b56f854c58b7
This commit makes the following project-wide changes/replacements as a
first step in cleaning up our use of `NTSTATUS`.
* Rewriting any uses of `NTSTATUS_FROM_WIN32` that were vulnerable to multiple evaluation bugs
* This is required because the macro version of `NTSTATUS_FROM_WIN32` evaluates its argument twice
* Removing all our local redefinitions of `NTSTATUS` in favor of that of `winternl.h`
* Because of this, we got to (had to?) remove some old transclusions from `conddkrefs.h`
* `NT_SUCCESS` (ours) -> `SUCCEEDED_NTSTATUS` (wil)
* `VERIFY_IS_TRUE(NT_SUCCESS())` (overly elaborate) -> `VERIFY_NT_SUCCESS` (WEX)
* `VERIFY_SUCCESS_NTSTATUS` (ours) -> `VERIFY_NT_SUCCESS` (WEX)
* `!SUCCEEDED_NTSTATUS` -> `FAILED_NTSTATUS`
* One bad use of S_OK as an NTSTATUS -> `STATUS_SUCCESS`
* Removing `NTSTATUS` from any projects that do not use it
Does what it says in the title. After this commit you can customize the height
and width of the terminal's cells. This commit supports parts of CSS'
`<length-percentage>` data type: Font-size relative sizes as multiples (`1.2`),
percentage (`120%`), or advance-width relative (`1.2ch`), as well as absolute
sizes in CSS pixels (`px`) or points (`pt`).
This PR is neither bug free in DxEngine, nor in AtlasEngine.
The former fails to implement glyph advance corrections (for instance #9381),
as well as disallowing glyphs to overlap rows. The latter has the same
overlap issue, but more severely as it tries to shrink glyphs to fit in.
Closes#3498Closes#14068
## Validation Steps Performed
* Setting `height` to `1` creates 12pt tall rows ✅
* Setting `height` to `1ch` creates square cells ✅
* Setting `width` to `1` creates square cells ✅
* Setting `width` or `height` to `Npx` or `Npt` works ✅
* Trailing zeroes are trimmed properly during serialization ✅
* Patching the PR to allow >100 line heights and entering "100.123456"
displays 6 fractional digits ✅
## Summary of the Pull Request
Let the profile pages' views have access to the window root, rather than the `ProfileViewModel`. The window root is passed along when the page is navigated to.
## Validation Steps Performed
Clicking `Browse` no longer crashes.
## PR Checklist
- [x] Closes#14808
This pull request removes, in full, our dependency on cpprestsdk. This
allows us to shed 500KiB-1.2MiB from our package off the top and enables
the following future investments:
- Removal of the App CRT forwarders to save an additional ~500KiB
- Switching over to the HybridCRT and removing our dependency on _any
CRT_.
cpprest was built on my dev box two or so years ago, and is in _utter_
violation of our compliance guidelines on SBOM et al.
In addition, this change allows us to use the proxy server configured
in Windows Settings.
I did this in four steps (represented roughly by the individual commits):
1. Switch from cpprest's http_client/json to Windows.Web.Http and
Windows.Data.Json
2. Switch from websocketpp to winhttp.dll's WebSocket implementation¹
3. Remove all remaining utility classes
4. Purge all dependencies from all projects and scripts on cpprest.
I also took this opportunity to add a feature flag that allows Dev
builds to run AzureConnection in-process.
¹ Windows.Networking.Sockets' API is so unergonomic that it was simply
infeasible (and also _horrible_) to use it.
## Validation Steps
I've run the Azure Connection quite a bit inproc.
Closes#4575.
Might be related to #5977, #11714, and with the user agent thing maybe #14403.
This is a rather trivial changeset. Now that these two are present in the
`std` namespace there's no reason for us to continue using the `gsl` ones.
Additionally this ensures future compatibility with other 3rd party libraries.
When working on #14745 I noticed that `SplitToOem` was in a bit of a poor state
as well. Instead of simply iterating over its `deque` argument and writing the
results into a new `deque` it used `pop` to advance the head of both queues.
This isn't quite exception safe and rather bloaty. Additionally there's no need
to call `WideCharToMultiByte` twice on each character if we know that the most
verbose encoding is UTF-8 which can't be any more than 4 chars anyways.
Related to #8000.
## PR Checklist
* 2 unit tests cover this ✅
When working on #14745 I found `KeyEvent`s a little hard to read in the
debugger. I noticed that this is because of sign extension when converting
`char`s to `wchar_t`s in `KeyEvent::SetCharData`.
The original console output modes were considered attributes of the
buffer, while later additions were treated as global state, and yet both
were accessed via the same buffer-based API. This could result in the
reported modes being out of sync with the way the system was actually
behaving, and a call to `SetConsoleMode` without updating anything could
still trigger unpredictable changes in behavior.
This PR attempts to address that problem by making all modes part of the
buffer state, and giving them predictable default values.
While this won't solve all the tmux layout-breaking issues in #6987, it
does at least fix one case which was the result of an unexpected change
in the `DISABLE_NEWLINE_AUTO_RETURN` mode.
All access to the output modes is now done via the `OutputMode` field in
`SCREEN_INFORMATION`. The fields that were tracking global state in the
`Settings` class (`_fAutoReturnOnNewline` and `_fRenderGridWorldwide`)
have now been removed.
We still have a global `_dwVirtTermLevel` field, though, but that now
serves as a default value for the `ENABLE_VIRTUAL_TERMINAL_PROCESSING`
mode when creating a new buffer. It's enabled for conpty mode, and when
the VT level in the registry is not 0. That default doesn't change.
For the VT alternate buffer, things works slightly differently, since
there is an expectation that VT modes are global. So when creating an
alt buffer, we copy the current modes from the main buffer, and when
it's closed, we copy them back again.
## Validation Steps Performed
I've manually confirmed that this fixes the problem described in issue
#14690. I've also added a basic feature test that confirms the modes are
initialized as expected when creating new buffers, and changes to the
modes in one buffer do not impact any other buffers.
Closes#14690
New-TerminalStackedChangelog used to generate logs that looked like this:
```
* [3] A commit that was seen 3 times
* A commit that was only seen once
* [2] Some other commit
```
Now it will generate logs that look like this:
```
/ base..branch-1
|/ base..branch-2
||/ base..branch-3
* [XXX] A commit that was seen 3 times
* [ X ] A commit that was only seen once
* [XX ] Some other commit
```
This format is more expressive, as it indicates _which branches_ contain which commits.
As a reminder, my release note writing style starts with a stacked changelog. It's how I tell (1) which commits are in the new preview release only, (2) which commits are in the new preview and the new stable release and (3) which commits were already released in a previous stable release.
Changes from 1 get included in the new changelog, changes from 2 get included in both and changes from 3 get deleted because they have already been released.
For some reason, Windows Terminal stops dispatching UIA TextChanged events sometimes. There isn't a reliable repro for this bug.
However, under NVDA's logger, it appears that when the bug does occur, we still dispatch UIA notifications (which may be ignored by NVDA in some configurations). A "quick fix" here is to dispatch a TextChanged event if we're going to dispatch a notification. Since we're just enabling a flag, we won't send two events at once.
Closes#10911
The `SignalTextChanged` crash seems to be occurring due to the `TermControlAutomationPeer` being destructed by the time the UIA event is actually dispatched. Even though we're already checking if TCAP and TermControl still exist, it could be that the TermControl is being closed as text is being output.
The proposed fix here is to record when the closing process starts and exposing that information directly to the TCAP. If TCAP sees that we're in the process of closing, don't bother sending a UIA event.
Closes#13978
Up until now, we have been relying on the catalog signature produced for our MSIX package.
There are some things (Packaged COM, Process Explorer as of 2022) that cannot handle catalog-signed
files. It's easier and safer for us to simply sign all the executables we produce before packaging them.
Unfortunately, we can't do it before we package them. We have to unpack and re-pack our package.
In the future, this will allow us to provide a codesigned distribution that is not in an MSIX package.
TEST=Ran a build and checked out the contents of the package. They were all signed!
Closes#13294Closes#12695Closes#9670
We forgot to updateTheme again when we change the titlebar color. That would result in us setting the titlebar visibility only when the settings were reloaded, but if the unfocused BG was opaque, and the focused was transparent, we'd use the current _unfocused_ color to set the titlebar visibility.
Also, this fixes a bug with `tabRow.BG: terminalBackground`
from teams for brevity
> tabRow.BG = terminalBackground might not work, and here's why
>
> the termcontrol's BG brush might be (r,g,b, 255), with an Opacity of 0
>
> so my "use mica when the brush's A is <1.0" doesn't work
>
closes#14563
This uses `shell:AppsFolder` to launch elevated instances of the app via
`ShellExecuteEx` and `runas` in elevate-shim.exe. The app to launch is
discovered via the `GetCurrentApplicationUserModelId` API.
e.g. `shell:AppsFolder\WindowsTerminalDev_8wekyb3d8bbwe!App`
This will fallback to launching `WindowsTerminal.exe` if it fails to
discover the app user model id to launch.
This also fixes a bug in elevate-shim where the first argument of
WinMain was lost (e.g. `new-tab`).
Curiously, `AppLogic::RunAsUwp()` is never called and
`AppLogic::IsUwp()` is always false when running debug builds locally
(e.g. WindowsTerminalDev). It's not clear if this is an artifact of
development packages or something else.
## Validation Steps Performed
Various manual debug/execution scenarios.
Verified the fallback path by running the unbundled app by extracting
the `CascadiaPackage_0.0.1.0_x64.msix` from the 'drop' build artifact.
Fixes#14501
This regressed when we implemented ColorSchemeViewModel in #13179.
This commit fixes that by automatically focusing the ColorSchemeListView
when we navigate to the ColorSchemes page, which makes sense from a
user experience perspective anyway.
Closes#11971
Specify the resource to use for the list view item background when selected.
References #14693
## Validation Steps Performed
Background is no longer blue, it is light gray (like in Windows 11). Screenshots below.
This should make sure we only use Mica for the BG of the SUI when we're on a Windows build that supports it. Otherwise, we're just gonna get the emergency backstop / full transparency under it.
Confirmed this fixes it on my win10 VM.
Closes#14667
This PR add support for the ANSI Insert/Replace mode (`IRM`), which
determines whether output characters are inserted at the active cursor
position, moving existing content to the right, or whether they should
overwrite the content that is already there.
The implementation is a bit of a hack. When that mode is enabled, it
first measures how many cells the string is expected to occupy, then
scrolls the target line right by that amount before writing out the new
text.
In the longer term it might be better if this was implemented entirely
in the `TextBuffer` itself, so the scrolling could take place at the
same time as the content was being written.
## Validation Steps Performed
I've added a very basic unit test that verifies the mode is working as
expected. But I've also done a lot more manual testing, confirming edge
cases like wide characters, double-width lines, and both with and
without wrapping mode enabled.
Closes#1947
## Summary of the Pull Request
When we navigate to the color schemes page, find the default color scheme (if present) and manually set the container's automation name to include the word 'default'.
Note that we don't want to change the actual `ColorSchemeViewModel`'s name since that name is used internally to identify schemes. We only want to change the `ListViewItem`'s name, i.e. the container in the SUI.
## PR Checklist
* [x] Closes#14401
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Screen reader reads out the 'default' text now. It also correctly reads out the new default scheme if the default scheme is changed via SUI or json.
As of about 2022, the one's digit of the Build of our version is a placeholder value to differentiate the Windows 10 build from the Windows 11 build. Let's trim that out, it's only a source of confusion.
For additional clarity, let's omit the Revision, which _must_ be `.0`, and doesn't provide any value to report.
We will need to make sure we report releases as `1.17.ABC` now, instead of `1.17.ABC1.0`/`1.17.ABC2.0`
Let's not backport this. 1.17 will be the start of the new numbering scheme. Otherwise, `1.16.EFG` < `1.16.ABC1.0`, for an old version `ABC1` and a new version `EFG`.
* closes#14106
* As summarized here: https://github.com/microsoft/terminal/issues/14106#issuecomment-1289462310
`_Entries` was getting default constructed to `nullptr`. We should be careful about that.
Adds a test too, and fixes a regression in the local tests introduced in #13763.
Closes#14557
ColorScheme MVVM was implemented in #13179. This PR updates the
ProfileViewModel/AppearanceViewModels to use color scheme view models
instead of the raw settings model objects.
* [x] Updates ProfileViewModel/AppearanceViewModel to use
ColorSchemesPageViewModel/ColorSchemeViewModel implemented in #13179
* [x] Removes ProfilePageNavigationState
## Validation Steps Performed
Settings UI still works (we _probably_ want to bug bash this at some
point though as with all SUI changes)
The main purpose of this PR was to merge the `ITerminalApi::PrintString`
implementations into a shared method in `AdaptDispatch`, and avoid the
VT code path depending on `WriteCharsLegacy`. But this refactoring has
also fixed some bugs that existed in the original implementations.
This helps to close the gap between the Conhost and Terminal (#13408).
I started by taking the `WriteCharsLegacy` implementation, and stripping
out everything that didn't apply to the VT code path. What was left was
a fairly simple loop with the following steps:
1. Check if _delayed wrap_ is set, and if so, move to the next line.
2. Write out as much of the string as will fit on the current line.
3. If we reach the end of the line, set the _delayed wrap_ flag again.
4. Repeat the loop until the entire string has been output.
But step 2 was a little more complicated than necessary because of its
legacy history. It was copying the string into a temporary buffer,
manually estimated how much of it would fit, and then passing on that
partial buffer to the `TextBuffer::Write` method.
In the new implementation, we just pass the entire string directly to
`TextBuffer::WriteLine`, and that handles the clipping itself. The
returned `OutputCellIterator` tells us how much of the string is left.
This approach fixes some issues with wide characters, and should also
cope better with future buffer enhancements.
Another improvement from the new implementation is that the Terminal now
handles delayed EOL wrap correctly. However, the downside of this is
that it introduced a cursor-dropping bug that previously only affected
conhost. I hadn't originally intended to fix that, but it became more of
an issue now.
The root cause was the fact that we called `cursor.StartDeferDrawing()`
before outputting the text, and this was something I had adopted in the
new implementation as well. But I've now removed that, and instead just
call `cursor.SetIsOn(false)`. This seems to avoid the cursor droppings,
and hopefully still has similar performance benefits.
The other thing worth mentioning is that I've eliminated some special
casing handling for the `ENABLE_VIRTUAL_TERMINAL_PROCESSING` mode and
the `WC_DELAY_EOL_WRAP` flag in the `WriteCharsLegacy` function. They
were only used for VT output, so aren't needed here anymore.
## Validation Steps Performed
I've just been testing manually, writing out sample text both in ASCII
and with wide Unicode chars. I've made sure it wraps correctly when
exceeding the available space, but doesn't wrap when stopped at the last
column, and with `DECAWM` disabled, it doesn't wrap at all.
I've also confirmed that the test case from issue #12739 is now working
correctly, and the cursor no longer disappears in Windows Terminal when
writing to the last column (i.e. the delayed EOL wrap is working).
Closes#780Closes#6162Closes#6555Closes#12440Closes#12739
I can't exactly repro #14559. I suspect that's due to #14567 having been merged. This, however, seemed related. Without this, we'll use the App's `RequestedTheme` (the one that can't be changed at runtime), rather than the user's `requestedTheme`. That will do weird things, like make the BG of the SUI dark, with white expanders.
I think this should close#14559.
Some investigation revealed that `_keyEvents` would get a `NULL_POINTER_READ` error. On the main thread, `RecordKeyEvent()` would be called, which mainly updates `_keyEvents`. On the renderer thread, `NotifyNewOutput()` would be called, which starts by iterating through `_keyEvents` and slowly clearing it out. On occasion, these two threads are modifying `_keyEvents` simultaneously, causing a crash.
The fix is to add a mutex on this variable.
Closes#14592
Basically what it says on the tin. For transparent tabs, we should layer on to the tab row to evaluate what the actual color of the tab will be. We did this for deselected tabs, but not for selected ones.
Gif below.
Closes#14561
## Summary of the Pull Request
Updates the tab event handling so that the "Export Text" and "Find" tab context menu items work when a tab isn't focused.
## PR Checklist
* [x] Closes#13948
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Manually tested.
This builds upon #10749. When we added a separate pivot to track the "active" anchor, we forgot to update the pivot while circling. What does that mean? Moving the mouse would trigger us to update the selection using new endpoint and the old _pivot_, which hadn't been updated.
There's probably a more elegant way of doing this, but it's good enough.
Updated the test to cover this as well.
Closes#14462
What it says on the tin.
I finally figured out the right way to validate schema updates in VsCode, which made this a lot faster. Tossed notes in the wiki for next time I do this.
Closes#14560
#14461 is caused by a null pointer exception in `TerminalIsSelectionActive()`. Since this reveals that it is possible to enter a state where `_terminal` is null, I've gone ahead and added null-checks throughout the code to make it more stable.
Closes#14461
## Validation Steps Performed
Ran locally. Still works.
CascadiaSettings relies on getting a JsonUtils::DeserializationException
from the various JSON Utility functions, and then formatting that into
an error message. Well, DeserializationException tries to include an
object representation in its what() message . . . and generates an
exception trying to do so. CascadiaSettings never gets the
DeserializationException, and displays a weird message.
It's safe to remove the stringification in DeserializationException
because CascadiaSettings was never using it (_and_ because
CascadiaSettings was using an even better version of the same logic.)
Fixes#14373
When the buffer contains wide characters that occupy more than one cell,
and those cells are scrolled horizontally by exactly one column, that
operation can result in the wide characters being completely erased.
This PR attempts to fix that bug, although it's not an ideal long term
solution.
Although not really to blame, it was PR #13626 that exposed this issue.
The root of the problem is that scrolling operations copy cells one by
one, but wide characters are written to the buffer two cells at a time.
So when you move a wide character one position to the left or right, it
can overwrite itself before it's finished copying, and the end result is
the whole character gets erased.
I've attempt to solve this by getting the affected operations to read
two cells in advance before they start writing, so there's no risk of
losing the source data before it's fully output. This may not work in
the long term, with characters wider than two cells, but it should at
least be good enough for now.
I've also changed the `TextBuffer::Write` call to a `WriteLine` call to
improve the handling of a wide character on the end of the line, where
moving it right by one column would place it half off screen. It should
just be dropped, but with the `Write` method, it would end up pushed
onto the following line.
## Validation Steps Performed
I've manually confirmed this fixes all the test cases described in
#14626, and also added some unit tests that replicate those scenarios.
Closes#14626
This is basically just like #14064, but with the `theme` instead.
If you define a pair of `theme` names:
```json
"theme": { "dark": "light", "light": "dark" },
```
then the Terminal will use the one relevant for the current OS theme. This cooperates with #14064, who sets the `scheme` based on the app's theme.
This was spec'd as a part of #3327 / #12530, but never promoted to its own issue.
Gif below.
In order to modify the accessibility information for the PseudoConsoleWindow, it needs to have a UIA provider registered. This PR introduces `PseudoConsoleWindowAccessibilityProvider` and registers it as a UIA provider appropriately. The registration process is based on that of the `WindowUiaProvider` for ConHost.
Closes#14385
## Validation Steps Performed
Run Accessibility Insights FastPass on the window. The PseudoConsoleWindow no longer is tagged as missing a name.
Depending on the line rendition, and whether the cursor is over a wide
character or not, it's possible for the width to take up anywhere from 1
to 4 cells. And when it's more than 1 cell wide, part of the cursor may
end up off screen. However, our bounds check requires the entire cursor
to be on screen, otherwise it doesn't render anything, and that can
result in cursor droppings being left behind. This PR fixes that.
The bounds check that is causing this issue was introduced in #13001 to
fix a debug assertion.
To fix this, I've removed the bounds checking, and instead clip the
cursor rect to the boundaries of the viewport. This is what the original
code was trying to do prior to the #13001 fix, but was mistakenly using
the `Viewport:Clamp` method, instead of `TrimToViewport`. Since this
implementation doesn't require a clamp, there should be no risk of the
debug assertion returning.
## Validation Steps Performed
I've confirmed that the test case in #14657 is now working correctly,
and not leaving cursor droppings behind. I've also tested under conhost
with buffer sizes wider than the viewport, and confirmed it can handle a
wide cursor partially scrolled off screen.
Closes#14657
Grab all paths from `DROPFILES` struct provided in drag event data
`GetStorageItemsAsync()` only giving up to 16 items when items are dropped from any archives
- When this occurs, we should look into `FileDrop` key for a stream of the [`DROPFILES struct`](https://learn.microsoft.com/en-us/windows/win32/shell/clipboard#cf_hdrop)
- This struct contains a null-character delimited string of paths which we can just read out
## Validation Steps Performed
* [X] Unit tests pass locally
* [X] Drag and drop paths work for both archives and non-archives files, folders, shortcuts, etc.
Closes#14628
Fix access violation on lParam when constructing wstring.
Per the [WM_SETTINGSCHANGE docs], NULL is a valid value for lParam. A
null lParam was observed when using the 'Switch User' feature of Windows
while developing the Terminal app.
## Validation Steps Performed
Reproduced the scenario w/ the check in place and verified no crash.
Closes#14652
[WM_SETTINGSCHANGE docs]: https://learn.microsoft.com/en-us/windows/win32/winmsg/wm-settingchange
`s/it's/its/`
Note that I didn't touch the several errors in the doc and doc/spec directories, since those seem to be dated and signed email excerpts, and I don't want to violate authorial integrity. Let me know if you would like me to fix those as well.
## References
p 57. Murray, L. (1824). English grammar. Philadelphia : E. T. Scott.
I skimmed several hundred usages of the word "it's" in the code. This actually wasn't as tiresome as it sounds, since many of the code comments in this repo are entertaining and educational — the adjectives do not _necessarily_ apply in that order, but do _possibly_ apply in that order.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Added an additional optional parameter that indicates the position of the new tab being created.
https://user-images.githubusercontent.com/17508246/206831900-d8349fb6-4241-4c37-8dd8-e1645ba94c90.mp4https://user-images.githubusercontent.com/17508246/206831949-02e4156e-f471-4d2f-b54b-3b0d294c62fe.mp4
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#14313
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
An optional parameter is added to TerminalPage::_CreateNewTabPane() and TerminalPage::_InitializeTab() which indicates the insert position of the duplicated tab.
During a new tab creation (not duplicate), this optional parameter has a default value(-1) and the new tab is inserted at the end.
The duplicated tab is inserted next to the original one even if it is not focused.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Created different tabs and duplicated them.
Duplicated tabs that are focused and not focused.
This PR replaces the uses of `Viewport::CompareInBounds()` in the UIA code with `til::point` comparators. Additionally, it simplifies the logic further by using `std::max` and `std::min`.
In doing so, we are no longer hitting the `assert` in `CompareInBounds()`.
Closes#14542
2 new ConPTY APIs were added as part of this commit:
* `ClosePseudoConsoleTimeout`
Complements `ClosePseudoConsole`, allowing users to override the `INFINITE`
wait for OpenConsole to exit with any arbitrary timeout, including 0.
* `ConptyReleasePseudoConsole`
This releases the `\Reference` handle held by the `HPCON`. While it makes
launching further PTY clients via `PROC_THREAD_ATTRIBUTE_PSEUDOCONSOLE`
impossible, it does allow conhost/OpenConsole to exit naturally once all
console clients have disconnected. This makes it unnecessary to having to
monitor the exit of the spawned shell/application, just to then call
`ClosePseudoConsole`, while carefully continuing to read from the output
pipe. Instead users can now just read from the output pipe until it is
closed, knowing for sure that no more data will come or clients connect.
This is especially useful in combination with `ClosePseudoConsoleTimeout`
and a timeout of 0, to allow conhost/OpenConsole to exit asynchronously.
These new APIs are used to fix an array of bugs around Windows Terminal exiting
either too early or too late. They also make usage of the ConPTY API simpler in
most situations (when spawning a single application and waiting for it to exit).
Depends on #13882, #14041, #14160, #14282Closes#4564Closes#14416
Closes MSFT-42244182
## Validation Steps Performed
* Calling `FreeConsole` in a handoff'd application closes the tab ✅
* Create a .bat file containing only `start /B cmd.exe`.
If WT stable is the default terminal the tab closes instantly ✅
With these changes included the tab stays open with a cmd.exe prompt ✅
* New ConPTY tests ✅
## Summary of the Pull Request
Performs some cleanup in the Settings UI for the Launch Parameters settings:
1. Updates all `NumberBox` controls in the Settings UI to have a `Compact` `SpinButtonPlacementMode` instead of an inline one. This alleviates the XAML bug where the spin button would appear over the number box's input value.
2. Fixes an issue where a long X/Y value would resize the settings controls weirdly. This was fixed by introducing a `Grid` inside the main grid and applying a width to the number boxes.
3. Rename "Use system default" checkbox to be more clear. Propagate the new localized string into expander preview.
Closes#14558
Similar to #14519.
Voice Access allows for functionality like "click <name>" to automatically move the cursor and click on a control. The Search Box had an AutoProp.Name that didn't match the button text, leading to confusion because Voice Access wouldn't be able to find a control named "Create".
To fix this, we simply aligned the button text and the AutoProp.Name.
Closes#13808
## Summary of the Pull Request
- [x] Clicking a color scheme in the list view immediately takes you to the page to edit the scheme
- [x] Adding a new scheme immediately takes you to the page to edit the new scheme
- [x] 'delete' and 'set as default' buttons have been moved to the edit scheme page
## PR Checklist
* [x] Closes#14289
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
The schemes page still works, keyboard navigation also works
Voice Access allows for functionality like "click \<name\>" to automatically move the cursor and click on a control. The Search Box had an AutoProp.Name that didn't match the placeholder text, leading to confusion because Voice Access wouldn't be able to find a control named "Find...".
To fix this, we simply aligned the placeholder text and the AutoProp.Name to be "Find". The elipses were removed because no dialog is opened.
The fix was accomplished in two ways to ensure that this is backportable:
1. via code, directly set the AutoProp.Name to match the placeholder text.
2. in the resources file, explicitly match the AutoProp.Name to the placeholder text. This allows this change to be backportable in the event that the code above wasn't backported.
Closes#14398
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/2634-broadcast-input/doc/specs/drafts/%232634%20-%20Broadcast%20Input/%232634%20-%20Broadcast%20Input.md) ⇐
## Summary of the Pull Request
This is supposed to be a quick and dirty spec to socialize the various different options for Broadcast Input mode with the team. Hopefully we can come up with a big-picture design for the feature, so we can unblock #9222.
### Abstract
> With a viable prototype in #9222, it's important that we have a well-defined
> plan for how we want this feature to be exposed before merging that PR. This
> spec is intended to be a lighter-than-usual spec to build consensus on the
> design of how the actions should be expressed.
...
> _**Fortunately**_: All these proposals actually use the same set of actions. So
> it doesn't _really_ matter which we pick right now. We can unblock #9222 as
> the implementation of the `"tab"` scope, and address other scopes in the future.
> We should still decide long-term which of these we'd like, but the actions seem
> universal.
## PR Checklist
* [x] Specs: #2634
* [x] References: #9222, #4998
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
The release of Windows Terminal has served as a way to reinvigorate the command-line ecosystem on Windows by providing a modern experience that is consistently updated. This experience has caused faster innovation in the Windows command-line ecosystem that can be seen across various areas like expanded virtual terminal sequence support and enhanced accessibility. Command-line apps can now leverage these innovations to create a better experience for the end-user.
Since accessibility is a very broad area, this document is intended to present recent innovations in the accessibility space for the command-line ecosystem. Furthermore, it will propose additional improvements that can be made alongside key stakeholders that could benefit from such changes.
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie%2Fs%2F642-logging/doc/specs/drafts/%23642%20-%20Buffer%20Exporting%20and%20Logging/%23642%20-%20Buffer%20Exporting%20and%20Logging.md) ⇐
## Summary of the Pull Request
This is an intentionally brief spec to address the full scope of #642. The
intention of this spec is to quickly build consensus around all the features we
want for logging, and prepare an implementation plan.
### Abstract
> A common user need is the ability to export the history of a terminal session to
> a file, for later inspection or validation. This is something that could be
> triggered manually. Many terminal emulators provide the ability to automatically
> log the output of a session to a file, so the history is always captured. This
> spec will address improvements to the Windows Terminal to enable these kinds of
> exporting and logging scenarios.
## PR Checklist
* [x] Specs: #642
* [x] References: #5000, #9287, #11045, #11062
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
## Open Discussion
* [ ] What formatting string syntax and variables do we want to use?
* [ ] How exactly do we want to handle "log printable output"? Do we include backspaces? Do we only log on newlines?
* [ ] > maybe consider even simpler options like just `${date}` and `${time}`, and allow for future variants with something like `${date:yyyy-mm-dd}` or `${time:hhmm}`
We originally needed this library (or a separate DLL in our own project)
to handle hooking up the XAML resource loader to the providers that our
application needed. It was introduced in its nascent form in 2019, in a
PR titled "Make XAML files work."
It appears we no longer need it, and the provider hookup is being
handled by our `AppT2` base class override. I've tested this in Windows
10 Vb running unpackaged, and it seems to work totally fine. Crazy.
Removing this dependency saves us a couple hundred kilobytes on disk and
removes one consumer of the App CRT from our package.
Implements an initial version of #1571 as it has been specified, the
only big thing missing now is the possibility to add actions, which
depends on #6899.
Further upcoming spec tracked in #12584
Implemented according to [instructions by @zadjii-msft]. Mostly
relatively straightforward, but some notable details:
- In accordance with the spec, the counting/indexing of profiles is
based on their index in the json (so the index of the profile, not of
the entry in the menu).
- Resolving a profile name to an actual profile is done in a similar
fashion as how currently the `DefaultProfile` field is populated: the
`CascadiaSettings` constructor now has an extra `_resolve` function
that will iterate over all entries and resolve the names to instances;
this same function will compute all profile sets (the set of all
profiles from source "x", and the set of all remaining profiles)
- ~Fun~ fact: I spent two whole afternoons and evenings trying to add 2
classes (which turned out to be a trivial `.vcxproj` error), and then
managed to finish the entire rest of it in another afternoon and
evening...
## Validation Steps Performed
A lot of manual testing; as mentioned above I was not able to run any
tests so I could not add them for now. However, the logic is not too
tricky so it should be relatively safe.
Closes#1571
[instructions by @zadjii-msft]: https://github.com/microsoft/terminal/issues/1571#issuecomment-1184851000
This PR adds a new dynamic profile generator which creates profiles to
quickly connect to detected SSH hosts.
This PR adds a new `SshHostGenerator` inbox dynamic profile generator.
When run, it looks for an install of our
[Win32-OpenSSH](https://github.com/PowerShell/Win32-OpenSSH) client app
`ssh.exe` in all of the (official) places it gets installed. If the exe
is found, the generator then looks for and parses both the user and
system OpenSSH config files for valid SSH hosts. Each host is then
converted into a profiles to call `ssh.exe` and connect to those hosts.
VALIDATION
Installed OpenSSH, configured host for alt.org NetHack server, connected
and played some NetHack from the created profile.
* [x] When OpenSSH is not installed, don't add profiles
* [x] Detected when installed via Optional Features (installs in
`System32\OpenSSH`, added to PATH)
* [x] Detected when installed via the 32-Bit OpenSSH MSI from GitHub
(installs in `Program Files (x86)\OpenSSH`, not added to PATH)
* [x] Detected when installed via the 64-Bit OpenSSH MSI from GitHub
(installs in `Program Files\OpenSSH`, not added to PATH)
* [x] Detected when installed via `winget install
Microsoft.OpenSSH.Beta` (uses MSI from GitHub)
* [x] With `"disabledProfileSources": ["Windows.Terminal.SSH"]` the
profiles are not generated
Closes#9031
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Mike Griese <migrie@microsoft.com>
Closes https://github.com/microsoft/terminal/issues/9031
We couldn't do this before, because `App::Current().Resources().Lookup()` would always return the OS theme version of a resource. That thread has lengthy details on why.
FORTUNATELY FOR US, this isn't the first time we've dealt with this. We've come up with a workaround in the past, and we can just use it again here.
Closes#3917
This will also make #3061 easy 😉
## Summary of the Pull Request
This PR adds support for the DEC macro operations `DECDMAC` (Define Macro), and `DECINVM` (Invoke Macro), which allow an application to define a sequence of characters as a macro, and then later invoke that macro to execute the content as if it had just been received from the host.
This PR also adds two new `DSR` queries: one for reporting the available space remaining in the macro buffer (`DECMSR`), and another reporting a checksum of the macros that are currently defined (`DECCKSR`).
## PR Checklist
* [x] Closes#14205
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
I've created a separate `MacroBuffer` class to handle the parsing and storage of macros, so the `AdaptDispatch` class doesn't have to do much more than delegate the macro operations to that.
The one complication is the macro invocation, which requires injecting characters back into the state machine's input stream. Ideally we'd just pass the content to the `ProcessString` method, but we can't do that when it's already in the middle of a `CSI` dispatch.
My solution for this was to add an `OnCsiComplete` method via which we could register a callback function that injects the macro sequence only once the state machine has returned to the ground state. This feels a bit hacky, but that was the best approach I could come up with.
## Validation Steps Performed
Thanks to @KalleOlaviNiemitalo, we've been able to do some testing on a real VT420 to determine how the macro operations are intended to work, and I've tried to get our implementation to match that behavior as much as possible (we differ in some aspects of the checksum reporting, where the VT420 behavior seemed undesirable, or potentially buggy).
I've also added unit tests covering some of the same scenarios that we tested on the VT420.
This reverts commit 19b6d35.
This re-enables support for Mica, and transparent titlebars in general. It also syncs the titlebar opacity with the control opacity for `terminalBackground`. It also somehow fixes the bug where the bottom few pixels of the max btn doesn't work to trigger the snap flyout.
Closes#10509
Does nothing for #13631
### To-done's
* [x] Check the mica API on 22000, windows 11 RTM
- this works on 10.0.22621.674, but that's not 22000
* [x] Check how this behaves on windows 10.
- For both, this API just no-ops. That's fine! we can just say "Mica is only supported on >=22621"
This changeset includes various guards against resizing the terminal down to 0
columns/rows: The 2 `TextBuffer` locations that accept new sizes, as well as
the `HwndTerminal::Refresh` which was the entrypoint causing the issue.
Closes#14404
## Summary of the Pull Request
This change should have been a part of #14190 but was missed.
## PR Checklist
* [x] Closes#14469
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Setting launch position in the settings UI works now
## Summary of the Pull Request
Watson reports show that Visual Studio terminal attempts to render a string that is null causing the renderer to crash.
More specifically, we see "NULL_POINTER_WRITE_c0000005_PublicTerminalCore.dll!TextBuffer::WriteLine" with the following stack:
PublicTerminalCore!TextBuffer::WriteLine+0x1da
PublicTerminalCore!TextBuffer::Write+0x191
PublicTerminalCore!Microsoft::Terminal::Core::Terminal::_WriteBuffer+0x1d3
PublicTerminalCore!Microsoft::Terminal::Core::Terminal::PrintString+0x9
PublicTerminalCore!TerminalDispatch::PrintString+0x22
PublicTerminalCore!Microsoft::Console::VirtualTerminal::OutputStateMachineEngine::ActionPrintString+0x42
PublicTerminalCore!Microsoft::Console::VirtualTerminal::StateMachine::ProcessString+0x123
PublicTerminalCore!TerminalSendOutput+0x68
Microsoft_DotNet_MSBuildSdkResolver!DomainBoundILStubClass.IL_STUB_PInvoke(IntPtr, System.String)+0x8f
Microsoft_Terminal_Wpf!Microsoft.Terminal.Wpf.TerminalContainer.Connection_TerminalOutput(System.Object, Microsoft.Terminal.Wpf.TerminalOutputEventArgs)+0x20
Microsoft_VisualStudio_Terminal_Implementation!Microsoft.VisualStudio.Terminal.TerminalWindowBase+<>c__DisplayClass59_0+<<BeginProcessingPtyData>b__0>d.MoveNext()+0x55f
## References
Internal bug: [Bug 1614709](https://devdiv.visualstudio.com/DevDiv/_workitems/edit/1614709): [Watson] crash64: NULL_POINTER_WRITE_c0000005_PublicTerminalCore.dll!TextBuffer::WriteLine
## Detailed Description of the Pull Request / Additional comments
Added a null check before PInvoking TerminalSendOutput.
## Validation Steps Performed
Validated locally that the check prevents null strings from rendering.
When a terminal process exits (successful or not) and the profile isn't
set to automatically close the pane, a new message is displayed:
You can now close this terminal with ^D or Enter to restart.
Ctrl+D then is able to close the pane and Enter restarts it.
I originally tried to do this at the ConptyConnection layer by changing
the connection state from Failed to Closed, but then that didn't work
for the case where the process exited successfully but the profile isn't
set to exit automatically. So, I added an event to
ControlCore/TermControl that Pane watches. ControlCore watches to see if
the input is Ctrl+D (0x4) and if the connection is closed or failed, and
then raises the event so that Pane can close itself. As it turned out, I
think this is the better place to have the logic to watch for the Ctrl+D
key. Doing it at the ConptyConnection layer meant I had to parse out the
key from the escaped text passed to ConptyConnection::WriteInput.
## Validation Steps Performed
Tried adding lots of panes and then killing the processes outside of
Terminal. Each showed the new message and I could close them with Ctrl+D
or restart them with Enter. Also set a profile to never close
automatically to make sure Ctrl+D would work when a process exits
successfully.
Closes#12849Closes#11570Closes#4379
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This pull request solved the problem of users not being able to set color schemes specifically for dark or light mode. Now the code has been updated to accept a dark and light color scheme in the json. The old setting is still compatible. Keep in mind if you update your color scheme through the settings UI, it will set both dark and light to the color scheme selected. This is because the settings UI update for selecting both Dark and Light color schemes is not supported yet.
This also solves the problem of the UI not using the system OS theme. Now you can select system theme and your color scheme will be selected based on if the system theme is dark or light.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4066
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4066
* [x] Closes#14050
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA.
* [x] Tests added/passed I believe so, added one test to ColorSchemeTests.cpp and I believe it passed. Also had to modify TerminalSettingsTests.cpp to accept the new ApplyAppearanceSettings function template
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #4066 and also teams messages with @carlos-zamora
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
-Removed ColorSchemeName from MTSMSettings.h in order to process the setting for both string and object.
-Added DarkColorSchemeName and LightColorSchemeName properties to the AppearanceConfig to replace ColorSchemeName.
-Hacked a few processes to play nice with all 3 properties listed above as in some cases around the UI, we need to still use the ColorSchemeName. Once we change the UI I believe we can go back to just Dark and LightColorSchemeName
-Added and Updated Test to align to the new code.
Acceptable Json values,
"colorScheme":
{
"dark": "Campbell",
"light": "Campbell"
}
or
"colorScheme": "Campbell"
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Individual testing along with the test case added.
My goal is to make `IRenderData` "snapshottable", so that we
can render a frame of text without holding the console lock.
To facilitate this, this commit merges our 3 data interfaces
into one. It includes no actual changes apart from renames.
This commit is just a slight refactor of `ConsoleProcessList` which I've noticed
was in a poor shape. It replaces iterators with for-range loops, etc.
Additionally this fixes a bug in `SetConsoleWindowOwner`, where it used to
default to the newest client process instead of the oldest.
Finally, it changes the process container type from a doubly linked list
over to a simple array/vector, because using linked lists for heap allocated
elements felt quite a bit silly. To preserve the previous behavior of
`GetProcessList`, it simply iterates through the vector backwards.
## Validation Steps Performed
* All unit/feature tests pass ✅
* Launching a TUI application inside pwsh inside cmd
and exiting kills all 3 applications ✅
This changeset consists of two parts:
* Refactor `PtySignalInputThread` to move more code from `_InputThread`
into the various `_Do*` handlers. This allows us to precisely control
console locking behavior which is the cause of this bug.
* Add the 1-line fix to `_DoSetWindowParent` to unlock the console before
calling foreign functions (`SetWindowLongPtrW` in this case).
This fix is theoretical in nature, based on a memory dump from an affected user
and most likely fixes: https://developercommunity.visualstudio.com/t/10199439
## Validation Steps Performed
* ConPTY tests complete. ✅
My long-term plan is to replace the `CodepointWidth` enum with a simple integer
return value that indicates the amount of columns a codepoint is wide.
This is necessary so that we can return 0 for ZWJs (zero width joiners).
This initial commit represents a cleanup effort around `CodepointWidthDetector`.
Since less code runs faster, this change has the nice side-effect of running
roughly 5-10% faster across the board. It also drops the binary size by ~1.2kB.
## Validation Steps Performed
* `CodepointWidthDetectorTests` passes ✅
* U+26bf (``"`u{26bf}"`` inside pwsh) is a wide glyph
in OpenConsole and narrow one in Windows Terminal ✅
This is a partial fix for the Get-Credential issue. While investigating it, I found that the pseudoconsole window is not marked as being "owned" (in NTUSER) by the PID/TID of the console application that is "hosted" "in" it. Doing this does not (and cannot) fix `Get-Credential` failing in DefTerm scenarios.
ConsoleSetWindowOwner is one of the operations that can be done by a conhost to any window, and so the RemoteConsoleControl can call through to the Win32 ConsoleControl to pull it off.
I chose to add SetWindowOwner to the IConsoleControl interface instead of moving ConsoleControl::Control into the interface to reduce the amount of churn and better separate interface responsibilities.
References #14119
As noted in #11000.
This adds support for `FTCS_COMMAND_START`, `FTCS_COMMAND_EXECUTED` and `FTCS_COMMAND_FINISHED`, which allow a shell to more clearly markup parts of the buffer.
As a trick, I'm also making the `experimental.autoMarkPrompts` setting act like a `FTCS_COMMAND_EXECUTED` if it comes after a `FTCS_COMMAND_START`. This lets the whole sequence work for cmd.exe (which wouldn't otherwise be possible).
* My cmd prompt
```bat
PROMPT $e]133;D$e\$e]133;A$e\$e]9;9;$P$e\[$T]$e[97;46m%_seperator%$P$e[36;49m%_seperator%$e[0m$_$e[0m%_GITPROMPT%$e[94m%username%$e[0m@$e[32m%computername%$e[0m$G$e]133;B$e\
```
* pwsh profile, heavily cribbed from vscode
```pwsh
$Global:__LastHistoryId = -1
function Global:__Terminal-Get-LastExitCode {
if ($? -eq $True) {
return 0
}
# TODO: Should we just return a string instead?
# return -1
if ("$LastExitCode" -ne "") { return $LastExitCode }
return -1
}
function prompt {
# $gle = $LastExitCode
$gle = $(__Terminal-Get-LastExitCode);
$LastHistoryEntry = $(Get-History -Count 1)
# Skip finishing the command if the first command has not yet started
if ($Global:__LastHistoryId -ne -1) {
if ($LastHistoryEntry.Id -eq $Global:__LastHistoryId) {
# Don't provide a command line or exit code if there was no history entry (eg. ctrl+c, enter on no command)
$out += "`e]133;D`a"
} else {
# Command finished exit code
# OSC 633 ; D [; <ExitCode>] ST
$out += "`e]133;D;$gle`a"
}
}
$loc = $($executionContext.SessionState.Path.CurrentLocation);
# IMPORTANT: Make sure there's a printable charater _last_ in the prompt.
# Otherwise, PSReadline is gonna use the terminating `\` here and colorize
# that if it detects a syntax error
$out += "`e]133;A$([char]07)";
$out += "`e]9;9;`"$loc`"$([char]07)";
$out += "PWSH $loc$('>' * ($nestedPromptLevel + 1)) ";
$out += "`e]133;B$([char]07)";
$Global:__LastHistoryId = $LastHistoryEntry.Id
return $out
}
```
* Doesn't close any issues, because this was always just an element in #11000
* I work here
* From FHL code
This is a follow-up of #13025 to make the members of `til::point/size/rect`
uniform and consistent without the use of `unions`. The only file that has
any changes is `src/host/getset.cpp` where an if condition was simplified.
## Validation Steps Performed
* Host unit tests ✅
* Host feature tests ✅
* ControlCore feature tests ✅
This PR adds support for the `DECRQM` (Request Mode) escape sequence,
which allows applications to query the state of the various modes
supported by the terminal. It also adds support for the `DECNKM` mode,
which aliases the existing `DECKPAM` and `DECKPNM` operations, so they
can be queried with `DECRQM` too.
This is one solution for #10153 (saving and restoring the state of
bracketed paste mode), and should also help with #1040 (providing a way
for clients to determine the capabilities of the terminal).
Prior to adding `DECRQM`, I also did some refactoring of the mode
handling to get rid of the mode setting methods in the `ITermDispatch`
interface that had no need to be there. Most of them were essentially a
single line of code that could easily be executed directly from the
`_ModeParamsHelper` handler anyway.
As part of this refactoring I combined all the internal `AdaptDispatch`
modes into an `enumset` to allow for easier management, and made sure
all modes were correctly reset in the `HardReset` method (prior to this,
there were a number of modes that we weren't restoring when we should
have been).
And note that there are some differences in behavior between conhost and
Windows Terminal. In conhost, `DECRQM` will report bracketed paste mode
as unsupported, and in Terminal, both `DECCOLM` and `AllowDECCOLM` are
reported as unsupported. And `DECCOLM` is now explicitly ignored in
conpty mode, to avoid the conpty client and conhost getting out of sync.
## Validation Steps Performed
I've manually confirmed that all the supported modes are reported in the
`DECRQM` tests in Vttest, and I have my own test scripts which I've used
to confirm that `RIS` is now resetting the modes correctly.
I've also added a unit test in `AdapterTest` that iterates through the
modes, checking the responses from `DECRQM` for both the set and reset
states.
I should also mention that I had to do some refactoring of the existing
tests to compensate for methods that were removed from `ITermDispatch`,
particularly in `OutputEngineTest`. In many cases, though, these tests
weren't doing much more than testing the test framework.
I originally added these platforms to prevent the .NET components from
building when you built the entire solution, and to prevent them from
building in CI.
It turns out that managing an extra thousand project-platform-config
triples is an absolute pain, **and** that we should have been building
these things in CI the entire time. So.
This should make life _a lot_ easier.
As a bonus, this PR enables the WPF test harness to build for ARM64.
This fixes two issues with `experimental.useBackgroundImageForWindow` I discovered while looking at #14260
* It looks like the opacity of the whole-window BG image wouldn't hot reload if the path didn't.
* > set useBGForWindow:true, focus a pane with an image, then set it to useBGForWindow:false, and observe a pane with <100 opacity. You'll be able to see the BG image left behind!
These are pretty easy to miss, so I can see how it happened.
I don't think this _technically_ closes that thread, though. Ultimately, I think OP's settings were just wrong (and possible didn't hot-reload). There's another, trickier bit I'm discussing in that thread, that might deserve its own separate follow-up for discussion.
In the most recent compiler ingestion into Windows ("LKG14"), we found
that this particular construction--checking an optional for a value
during this range-for loop--resulted in bad code generation.
When optimized, it generates code that looks effectively like this:
```c++
if (!newRowWidth.has_value()) {
while (true) {
// do the row stuff...
++it;
}
}
```
The loop never exits, and `_RefreshRowIDs` walks off the end of the
buffer. Whoops.
This commit fixes that issue by tricking the optimizer to go another
way. Leonard tells me it's harmless to call `Resize` a bunch of times,
even if it's a no-op, so I trust that this change results in the right
outcome with none of the crashing.
Fixes MSFT-41456525
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 c2b3697c867bddf5660da8b222e99ff4bfd1ea5b
#14160 didn't fix#14132 entirely. There seems to be a race condition left
where (on my system) 9 out of 10 times everything works correctly,
but sometimes OpenConsole exits, while pwsh and bash keep running.
My leading theory is that the new code is exiting OpenConsole faster than the
old code. This prevents clients from calling console APIs, etc. causing them
to get stuck. The old code (and new code) calls `ExitProcess` when the ConPTY
pipes break and I think this is wrong: In conhost when you close the window we
only call `CloseConsoleProcessState` via the `WM_CLOSE` event and that's it.
Solution: Remove the call to `RundownAndExit` for ConPTY.
During testing I found that continuously printing text inside msys2 will cause
child processes to only exit slowly one by one every 5 seconds.
This happens because `CloseConsoleProcessState` calls `HandleCtrlEvent` without
holding the console lock. This creates a race condition where most of the time
the console IO thread is the one picking up the `CTRL_CLOSE_EVENT`. But that's
problematic because the `CTRL_CLOSE_EVENT` leads to a `ConsoleControl` call of
type `ConsoleEndTask` which calls back into conhost's IO thread and
so you got the IO thread waiting on itself to respond.
Solution: Don't race conditions.
## Validation Steps Performed
* `Enter-VsDevShell` and close the tab
Everything exits after 5s ✅
* Run msys2 bash from within pwsh and close the tab
Everything exits instantly ✅
* Run `cat bigfile.txt` and close the tab
Everything exits instantly ✅
* Patch `conhost.exe` with `sfpcopy`, as well as `KernelBase.dll`
with the recent changes to `winconpty`, then launch and exit
shells and applications via VS Code's terminal ✅
* On the main branch without this modification remove the call to
`TriggerTeardown` in `RundownAndExit` (this speeds up the shutdown).
Run (msys2's) `bash.exe --login` and hold enter and then press Ctrl+Shift+W
simultaneously. The tab should close and randomly OpenConsole should exit
early while pwsh/bash keep running. Then retry this with this branch and
observe how the child processes don't stick around forever anymore. ✅
Arm64EC does not support AVX and the usage of it in EC compilation is now an error with the LKG14 compiler update. The fix is to conditionalize using AVX for non-EC compilation.
Related work items: MSFT-42045281
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 31ca1e08e001988b95ff29a5e098441cae0363bd
Upgrades check-spelling to v0.0.21
The command to apply changes should now work on Windows (it requires
Perl, but I believe that's more or less present most of the time, and it
should walk you through the rest of the required tools).
There are a bunch of new features, the most important here are probably
being able to update the metadata from Windows. (If it doesn't work,
please @ me).
Also, candidate.patterns will automatically suggest patterns. You can
see them in patterns.txt, e.g.:
```
# Automatically suggested patterns
# hit-count: 3831 file-count: 582
# IServiceProvider
\bI(?=(?:[A-Z][a-z]{2,})+\b)
```
The metadata bits (the hit count/file count) don't have to be retained
(I hope they'll be useful in deciding whether/or not to add a pattern,
i.e. "how applicable is it?"), the comment hinting at what the pattern
does is probably worth retaining.
We've been using more or less this version for a while internally
(including talk-to-bot, and, I do have a pattern that could be used to
let people use that in forks, but, I'm going to skip that for now).
This weekend, I did some cleanup for `act` (to run check-spelling
locally), and some minor polish.
You can see the runs I made in
https://github.com/check-spelling/terminal/actions
This commit replaces `Utf16Parser` with `<til/unicode.h>` which includes:
* `til::utf16_iterator` as a replacement for `Utf16Parser::Parse`
* `til::utf16_next` as a replacement for `Utf16Parser::ParseNext`
This fixes 2 bugs with `Utf16Parser`:
* Swallowing invalid surrogate pairs instead of turning them into U+FFFD.
* `std::vector<std::vector<wchar_t>>`. It's now >12000% faster.
## Validation Steps Performed
* New unit tests pass ✅
* Searching for narrow/wide characters in conhost works ✅
Doc updated in response to some discussion in [#11326] and
[#7774]. In those PRs, it became clear that there needs to be a simple way of
collecting up a whole group of profiles automatically for sorting in these
menus. Although discussion centered on how hard it would be for extensions to
provide that customization themselves, the `match` statement was added as a way
to allow the user to easily filter those profiles themselves.
This was something we had originally considered as a "future consideration", but
ultimately deemed it to be out of scope for the initial spec review.
References:
* #1571
* #11326
* #7774
Commits mentioned in this file will be acknowledged by GitHub, but
skipped in the blame view. Other tools use this as well.
You can make git use it by passing
`--ignore-revs-file .git-blame-ignore-revs` to `git blame`.
The only commits we're ignoring right now are codebase-wide reformatting
or line endings changes.
## Summary of the Pull Request
Ensures that reading the buffer content actually returns the content.
## References
Regressed in #13626.
## PR Checklist
* [x] Closes#14378
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Added a test.
This commit is a from-scratch rewrite of `ROW` with the primary goal to get
rid of the rather bodgy `UnicodeStorage` class and improve Unicode support.
Previously a 120x9001 terminal buffer would store a vector of 9001 `ROW`s
where each `ROW` stored exactly 120 `wchar_t`. Glyphs exceeding their
allocated space would be stored in the `UnicodeStorage` which was basically
a `hashmap<Coordinate, String>`. Iterating over the text in a `ROW` would
require us to check each glyph and fetch it from the map conditionally.
On newlines we'd have to invalidate all map entries that are now gone,
so for every invalidated `ROW` we'd iterate through all glyphs again and if
a single one was stored in `UnicodeStorage`, we'd then iterate through the
entire hashmap to remove all coordinates that were residing on that `ROW`.
All in all, this wasn't the most robust nor performant code.
The new implementation is simple (from a design perspective):
Store all text in a `ROW` in a regular string. Grow the string if needed.
The association between columns and text works by storing character offsets
in a column-wide array. This algorithm is <100 LOC and removes ~1000.
As an aside this PR does a few more things that go hand in hand:
* Remove most of `ROW` helper classes, which aren't needed anymore.
* Allocate backing memory in a single `VirtualAlloc` call.
* Rewrite `IsCursorDoubleWidth` to use `DbcsAttrAt` directly.
Improves overall performance by 10-20% and makes this implementation
faster than the previous NxM storage, despite the added complexity.
Part of #8000
## Validation Steps Performed
* Existing and new unit and feature tests complete ✅
* Printing Unicode completes without crashing ✅
* Resizing works without crashing ✅
## Summary of the Pull Request
This PR adds support for the rectangular area escape sequences:
`DECCRA`, `DECFRA`, `DECERA`, `DECSERA`, `DECCARA`, `DECRARA`, and
`DECSACE`. They provide VT applications with an efficient way to copy,
fill, erase, or change the attributes in a rectangular area of the
screen.
## PR Checklist
* [x] Closes#14112
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #14112
## Detailed Description of the Pull Request / Additional comments
All of these operations take a rectangle, defined by four coordinates.
These need to have defaults applied, potentially need to be clipped
and/or clamped within the active margins, and finally converted to
absolute buffer coordinates. To avoid having to repeat that boilerplate
code everywhere, I've pulled that functionality out into a shared method
which they all use.
With that out of the way, operations like `DECFRA` (fill), `DECERA`
(erase), and `DECSERA` (selective erase) are fairly simple. They're just
filling the given rectangle using the existing methods `_FillRect` and
`_SelectiveEraseRect`. `DECCRA` (copy) is a little more work, because we
didn't have existing code for that in `AdaptDispatch`, but it's mostly
just cloned from the conhost `_CopyRectangle` function.
The `DECCARA` (change attributes) and `DECRARA` (reverse attributes)
operations are different though. Their coordinates can be interpreted as
either a rectangle, or a stream of character positions (determined by
the `DECSACE` escape sequence), and they both deal with attribute
manipulation of the target area. So again I've pulled out that common
functionality into some shared methods.
They both also take a list of `SGR` options which define the attribute
changes that they need to apply to the target area. To parse that data,
I've had to refactor the `SGR` decoder from the `SetGraphicsRendition`
method so it could be used with a given `TextAttribute` instance instead
of just modifying the active attributes.
The way that works in `DECCARA`, we apply the `SGR` options to two
`TextAttribute` instances - one with all rendition bits on, and one with
all off - producing a pair of bit masks. Then by `AND`ing the target
attributes with the first bit mask, and `OR`ing them with the second, we
can efficiently achieve the same effect as if we'd applied each `SGR`
option to our target cells one by one.
In the case of `DECRARA`, we only need to create a single bit mask to
achieve the "reverse attribute" effect. That bit mask is applied to the
target cells with an `XOR` operation.
## Validation Steps Performed
Thanks to @KalleOlaviNiemitalo, we've been able to run a series of tests
on a real VT420, so we have a good idea of how these ops are intended to
work. Our implementation does a reasonably good job of matching that
behavior, but we don't yet support paging, so we don't have the `DECCRA`
ability to copy between pages, and we also don't have the concept of
"unoccupied" cells, so we can't support that aspect of the streaming
operations.
It's also worth mentioning that the VT420 doesn't have colors, so we
can't be sure exactly how they are meant to interpreted. However, based
on the way the other attribute are handled, and what we know from the
DEC STD 070 documentation, I think it's fair to assume that our handling
of colors is also reasonable.
Prior to this PR, the conhost vertical scrollbar would be forced to be
visible whenever the "Disable Scroll-Forward" option was set. It was
assumed that it would be needed as soon as the current viewport was
filled, so it was better to start off visible and disabled.
When the viewport height and buffer height are the same, though, the
scrollbar is never needed, and conhost compensates for that by making
the window narrower. But since we were still forcing the scrollbar to be
visible, that would result in it overlapping content in the rightmost
columns.
This PR attempts to fix that issue by simply leaving the scrollbar to
decide the visibility itself. This is perhaps not as aesthetically
pleasing when it starts off hidden and then later becomes visible, but
that seems better than having it overlap the content.
I've manually confirmed this fixes the problem reported in issue #2449.
Closes#2449
## Summary of the Pull Request
Compiler was raising the error: `expression did not evaluate to a constant.`, causing the solution to fail when building. Removing this `constexpr` fixes it.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Solution builds now
AuditMode was accidentally disabled in 1c6aa4d, around 2 years ago.
This should fix this issue and address all the warnings it now generates.
Related to #14129.
The following members were not initialized during construction:
* `CursorType _defaultCursorShape`
* `bool _suppressApplicationTitle`
* `bool _bracketedPasteMode`
* `size_t _hyperlinkPatternId`
* `SelectionExpansion _multiClickSelectionMode`
* `til::CoordType _scrollbackLines`
Unlike gcc and clang, MSVC is fairly tame when it comes to removing code
tainted by undefined behavior, so the most likely affect this had is that
we were reading uninitialized memory.
Related to #14129.
We already were setting the automation properties on the expander, however, we were not setting it on the content when an expander was present. This change applies the automation properties to both the expander and the child content (i.e. TextBox).
Closes#13827
There is a condition which causes the console host process (conhost.exe)
to crash with a `FAIL_FAST` in `WriteCharsLegacy`.
**_Repro Scenario:_** Two conditions need to be met for crash to happen:
1. The `ENABLE_PROCESSED_OUTPUT` console mode needs to be disabled. This
condition is met through the race condition, explained in the section
below.
2. We are printing a string where there is a full width character
(character that requires two spaces on the screen) being printed at
the edge of the console window. That is, we have one character space
available, and the character requires 2 spaces.
Running following script (attached to bug) causes a crash:
`for /l %%A in (0, 1, 10000) do start /B C:\test.bat`
The script `test.bat` repeatedly prints a console-width line
with a DBCS character that doesn't fit.
_**Race:**_ Normally, we get into `WriteCharsLegacy` with
`PROCESSED_OUTPUT` enabled. However, during the initialization of a new
CMD session, `cmd!ResetConsoleMode()` is called, which first sets the
output console mode to the value of `curOutputMode` (which is a static
variable initialized to 0) by calling `SetConsoleMode()`, before then
setting it to the desired output mode with processed output enabled:
```c++
void ResetConsoleMode( void )
{
static DWORD desOutMode = ENABLE_PROCESSED_OUTPUT | /* ... */;
SetConsoleMode(conOut, curOutputMode); // <------ sets console mode to 0, disabling processed output
if (GetConsoleMode(conOut, &curOutputMode)) {
if ((curOutputMode & desOutMode) != desOutMode) {
curOutputMode |= desOutMode;
if (!SetConsoleMode(conOut, curOutputMode) && /* ... */) // <----- enables processed output
```
If there is another instance of CMD that is producing output in between
these two `SetConsoleMode()` calls, then we may end up in
`WriteCharsLegacy` with processed output mode disabled.
This fix removes a `FAIL_FAST_IF` that checks for `PROCESSED_OUTPUT`
mode after the initial character processing loop.
Before RS5, this was an `ASSERT()`. This FAIL_FAST was added in RS5 in
PR !1794053 (which changed all `ASSERT`-likes to `FAIL_FAST_IF`.)
We believe this assertion guarded only the "processing" of Backspace,
Tab, CR and LF, and did not expect that we would get out of the
character processing loop with unprocessed glyph characters. The
`FAIL_FAST` is redundant in this case, as the handlers for the
Backspace, Tab, CR and LF characters we are already checking for
`PROCESSED_OUTPUT`. Therefore, it is safe to remove this `FAIL_FAST`.
It turns out that we *can* exit the loop with unprocessed glyph
characters. In these cases, we don't want to `FAIL_FAST`.
# Validation
* Basic sanity testing to confirm strings are correctly being printed.
* Repro scenario script no longer crashes conhost.exe
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 eb5d8064dc0f09d8be92efb5e6efa69983f30a3f
Related work items: MSFT-42055103
`TextBuffer` is buggy and allows a `Trailing` `DbcsAttribute` to be written
into the first column. Since other code then blindly assumes that there's a
preceding `Leading` character, we'll get called with a X coordinate of -1.
This issue will be fixed by #13626 and this commit fixes it in the meantime.
Additionally fixes an unimportant crash when the window height is 0px,
because it was annoying during testing and doesn't hurt to be fixed.
## Validation Steps Performed
* Run a stress test that prints random Unicode at random positions
* Resize the window furiously at the same time
* Doesn't crash / fail-fast ✅
XAML has an issue in windows 10 where `Width="*"` does not work properly
inside the `DataTemplate` for a `ListView`. Because of this, the color
scheme list view items looked very strange in windows 10 (see #14187).
Thanks to that, we thought up a few new designs for the color schemes
page and selected a new one that blends the color chips with a region
that shows the foreground and background color with the text preview.
Closes#14187
My hope with this commit is to make our code more robust against accidental
recursive locking, as well as making it easier to write code with confidence,
with only a slight performance trade-off.
## Validation Steps Performed
* Playing Pac Man music through MIDI ✅
* Windows Terminal runs happily ever after ✅
Silent MIDI notes can be used to seemingly deny a user's input for long
durations (multiple minutes). This commit improves the situation by ignoring
all DECPS sequences for a second when Ctrl+C/Ctrl+Break is pressed.
Additionally it fixes a regression introduced in 666c446:
When we close a tab we need to unblock/shutdown `MidiAudio` early,
so that `ConptyConnection::Close()` can run down as fast as possible.
## Validation Steps Performed
* In pwsh in Windows Terminal 1.16 run ``while ($True) { echo "`e[3;8;3,~" }``
* Ctrl+C doesn't do anything ❎
* Closing the tab doesn't do anything ❎
* With these modifications in Windows Terminal:
* Ctrl+C stops the output ✅
* Closing the tab completes instantly ✅
* With these modifications in OpenConsole:
* Ctrl+C stops the output ✅
* Closing the window completes instantly ✅
If the opacity is set to 100%, the background becomes solid instead of 'fully opaque acrylic'. If the opacity is below 100% the acrylic material is re-enabled (depending on the user's settings).
## Validation Steps Performed
I updated two unit tests to reflect the change in behavior and manually tested the transition from <100% opacity to 100% opacity (and vice versa) on win11.
Steps:
1. Start with 100% opacity and acrylic material enabled.
2. Decrease opacity and observe acrylic effect.
3. Increase opacity back to 100% and disable the acrylic effect.
4. Decrease opacity and notice that acrylic effect is no longer there.
Closes#12880
Lately I've been a bit concerned about issues resulting from b036cab enabling
`/fp:fast` throughout the entire project. This commit reverts that change and:
* Enables `/fp:contract` which defaults to off since VS 17.0
This re-enables FMA for floats on ARM64. Since this doesn't affect NANs, etc.
I don't expect any issues apart from a slight change in float accuracy.
* Introduces `TIL_FAST_MATH_BEGIN` with which `/fp:fast` can be selectively
enabled for code that benefits from it like `ColorFix.cpp`.
Without `TIL_FAST_MATH_BEGIN` `ColorFix` is about twice as slow
(which is actually very noticeable in real life).
This PR doesn't produce any noticeable performance regressions.
## Validation Steps Performed
* Patch `RenderSettings.hpp` to include `Mode::AlwaysDistinguishableColors`
* Run a color intense application in AtlasEngine and observe CPU usage
## Summary of the Pull Request
Allow exe/dll paths for the `Icon` setting
The exe/dll icon needs to work in all the following areas:
* [x] The tab
* [x] The navigation view item in the SUI
* [x] The new tab flyout
* [x] The command palette
## PR Checklist
* [x] Closes#1504
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
For the command palette, we had to switch to using `ContentPresenter` because `IconSourceElement` cannot take in every type of icon we need to provide
## Validation Steps Performed
Setting "%SystemRoot%\System32\shell32.dll,214" as the icon for a profile works in all the cases listed above.
## Summary of the Pull Request
- Pipe the `ShowWindow` value through to `ConptyConnection`
- When `TerminalPage` receives the new connection, it checks the `ShowWindow` value and maximizes *IF* there were no other pre-existing tabs (in glomming mode, we don't want to maximize sessions that did not ask for it)
## References
#12154
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
This is just a temporary solution until we change our defterm handoff process. Because of the way the process currently works, we have no way of knowing that the connection has requested the window to be maximized until after we have already started a terminal session. This means that we have to manually maximize the window upon receiving the connection, instead of having the session _start_ maximized, as it probably should.
## Validation Steps Performed
`start /max python` with defterm enabled opens up python in a maximized WT window
The original implementation of the _Device Status Report_ sequence was
only capable of handling ANSI status queries. This PR adds the ability
to respond to private DEC queries as well.
To prove it's working as intended, I've also included support for the
DEC extended cursor position report (`DECXCPR`), which is essentially
the same as the ANSI cursor position report, but with an additional
parameter indicating the page number. Until we support paging, though,
that value is just hardcoded to 1.
## References
The method for distinguishing between ANSI options and the private DEC
options is based on the updates made to the `SM`/`RM` mode sequences in
PR #8469.
## Validation Steps Performed
I've added a couple of unit tests covering the `DECXCPR` report, and
also manually confirmed we now pass the _Extended Cursor-Position_ test
in vttest.
Closes#14206
[Git2Git] Merged PR 8017580: Emit traces to determine user opt-in status for Default-by-default
We already have tracing in the console host that tells us when a
console session was successfully handed off to a Terminal. However, that
doesn't provide us enough information about Windows' intent in doing
so--namely, (1) whether the user _wanted_ that handoff to happen, OR (2)
whether the user has opted out because they didn't want it to happen.
(1) looks like any other hand-off, which will pollute our statistics
(2) doesn't generate any messages, because we fail out of handoff before
logging a single thing.
This pull request adds new, better events.
The events look like this (in TVPP):
```
Microsoft.Windows.Console.Host ConsoleHandoffSessionStarted
handoffCLSID: {2eaca947-7f5f-4cfa-ba87-8f7fbeefbe69}
handoffTargetChosenByWindows: true
```
```
Microsoft.Windows.Console.Host ConsoleHandoffSessionStarted
handoffCLSID: {2eaca947-7f5f-4cfa-ba87-8f7fbeefbe69}
handoffTargetChosenByWindows: false
```
```
Microsoft.Windows.Console.Host ConsoleHandoffSessionStarted
handoffCLSID: {b23d10c0-e52e-411e-9d5b-c09fdf709c7d}
handoffTargetChosenByWindows: false
```
Cherry picked from !7583836
Cherry-picked from commit `26f311e2`.
Fixes MSFT-41943733
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 2c876875f24263409175e986102862eda4f09f32
## Summary of the Pull Request
This removes all of the redundant tooltips from the settings UI. Since all of the settings are added through the SettingsContainer, it's a pretty simple change.
Closes#14184
## Validation Steps Performed
- [X] hover over all settings in the settings UI
- [X] hover over all entries in the SUI nav view
This is just a quick drive-by improvement. Switching from double to float
roughly doubles performance on a contemporary x86 CPU with `/fp:fast`.
## Validation Steps Performed
* Patch `RenderSettings.hpp` to include `Mode::AlwaysDistinguishableColors`
* Run a color intense application in AtlasEngine and observe CPU usage
This pull request introduces a number of source files to ut_til/sources.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 35865f47ced9103b02b06a1eb8d43d26b420af99
Remove vestigial submodule entry
## References
#12778 removed the actual WIL submodule, but there was still an entry left in the `.gitmodules` file that was causing me confusion about an orphaned submodule directory I had in an old copy of the repo.
## Validation Steps Performed
- Official validation checks passed
- Build still works locally after a `git clean -fdx`
This regression was introduced in b3c9f01. Since `TermControl` is the XAML
object that owns its scrollbar and the scrollbar's `VisualStateManager`
a strong reference back to the `TermControl` results in a circular reference.
## Validation Steps Performed
* Set a breakpoint on `TermControl::~TermControl()`
* Breakpoint hits on tab close ✅
Updates the version of XamlStyler to one with support for .NET 6.0. The version used before this depended on .NET 3.1, [which goes out of support on 2022-12-13.](https://dotnet.microsoft.com/en-us/platform/support/policy/dotnet-core)
This shouldn't be controversial as .NET 6.0 is included with VS 2022, unlike .NET 3.1.
Override the center on launch setting when a position is specified on the commandline.
## Validation Steps Performed
1. Set center on launch in the SUI.
2. Run `wtd` - the new window is centered.
3. Run `wtd --pos 100,200` - the new window is positioned at (100,200).
Closes#14176
This commit makes the following improvements:
* Only adjust block characters that come from fallback fonts. This ensures
that the glyphs of the chosen font all look exactly as they were designed.
* When adjusting the size, use the fallback font's full block glyph U+2588
to determine the size that the given glyph should have.
Closes#14098
## Validation Steps Performed
* Print `UTF-8-demo.txt` in Consolas.
* All block glyphs look uniform. ✅
Fix a missing entry in the JSON schema for `intenseTextStyle`.
The JSON schema was missing an entry in the Profile section for
`intenseTextStyle`. I have added it as it appears in AppearanceConfig.
Note that this is currently duplicated in the schema -- however, this is
the pattern used already in Profile as AppearanceConfig entries have
alternate descriptions (and I have updated the description in that
section to make it clear it applies to unfocused terminals).
Longer-term, it likely makes sense to consolidate all entires into
ApperanceConfig and rely on the description for the `unfocusedApperance`
object/the name of the object to make the limited scope of those keys
clear, so that Profile can simply extend ApperanceConfig and the
duplication in the schema can be reduced.
## Validation Steps Performed
Validation with schema verifying tools including VS Code.
Partially addresses #13387
This pull request operates on the same theory as #14217, but at a lower
level. Carlos and I discovered that TerminalPage *already* has an
action-dispatching key preview handler, and that my implementation of
`IDirectKeyListener` handles focus-tree bubbling mostly correctly.
Because of that discovery, we learned we could move the
`IDirectKeyListener` into TerminalPage itself and not have to complicate
the SUI or the Command Palette with the DirectKey interface.
Validation:
When bound to Alt+Space, the system menu works in the command palette,
the settings UI, and in read-only panes.
Fixes#11970Closes#14217
Fixes MSFT-41390832
The way `DECARM` was initially implemented, we checked for repeated key
presses by matching the last recorded virtual key code, and used a 0 key
code to indicate that no key was pressed. This caused the VT query
responses to fail, because they generated key events with a 0 key code,
and that would end up being detected as a repeated key that should be
suppressed.
This PR fixes that issue by using a `std::optional` to track the last
key code, so if no key has been pressed we can represent that with
`std::nullopt`, and there's no way that can be confused with a genuine
key press.
The `DECARM` mode was introduced in PR #13981.
## Validation Steps Performed
I've manually tested in Vttest to confirm that the query reports are now
working again, even when `DECARM` is disabled. I've also checked that
`DECARM` itself it still working as expected.
Closes#14208
Problem:
* Calling `RundownAndExit` tries to flush out the last frame from `VtEngine`
* `VtEngine` indirectly calls `RundownAndExit` if the pipe is gone via `VtIo`
* `RundownAndExit` is called by other parts of OpenConsole
* `RundownAndExit` must be `[[noreturn]]` for most parts of OpenConsole
* `VtIo` itself has a mutex ensuring orderly shutdown
* In short, doing a thread safe orderly shutdown requires us to hold both,
a lock in `RundownAndExit` and `VtIo` at the same time, but while other parts
need a blocking `RundownAndExit`, `VtIo` needs a non-blocking one
* Refactoring the code to use optionally non-blocking `RundownAndExit`
requires refactoring and might prove to be just as buggy
Solution:
* Simply don't call `RundownAndExit` in `VtEngine` at all
* In case the write pipe breaks:
* `VtEngine` will close the handle
* The client should notice that their read pipe is broken and
close their write pipe sooner or later
* Once we notice that our read pipe is broken, we call `RundownAndExit`
* `RundownAndExit` might call back into `VtEngine` but
without a pipe it won't do anything
* In case the read pipe breaks or any other part calls `RundownAndExit`:
* We call `RundownAndExit`
* `RundownAndExit` might call back into `VtEngine` and depending on whether
the write pipe is broken or not it will simply write into it or ignore it
Closes#14132
Pretty sure this also applies to #1810
## Validation Steps Performed
* Open 5 tabs and run MSYS2's `bash --login` in each of them
* `Enter-VsDevShell` in another tab
* Close window
* 5 tab processes are killed instantly, 1 after ~3s ✅
* Replace conhost with OpenConsole via sfpcopy
* Launch Dozens of Git Bash tabs in VS Code
* Close them randomly
* Remaining ones still work, processes are gone ✅
c0b2f488c1
Unlike iTerm2, we're not planning on making it configurable.
This commit also adds a max length of 1024 characters on the "display URI" that we pass up to XAML, so as to not inundate the UI.
Fixes#14200
Since #13730 merged, when we parse LaunchPosition we treat the
coordinates as `int32_t`. This PR updates the actual `LaunchPosition`
struct to also use `int32_t` for consistency.
## Validation Steps Performed
Terminal still builds and runs
This pull request adds a couple `const` keywords, simplifies a bit of boolean logic,
adds the `static` keyword to `Commandline::IsEditLineEmpty`, and a couple more things.
Addressing post-hoc comments on the launch parameters expander in the SUI (added in #13605)
- Use more contextually appropriate strings (`Centered` instead of `On` / `Off`)
- Don't emit an extra `NotifyChanges`
References #13605
Instead of using the currently focused tab when an unfocused tab is duplicated, the `_MakePane(...)` function now uses an optional source tab argument that points to the correct tab being duplicated.
## Validation Steps Performed
Manually tested on multiple tabs with different profiles. Performed steps:
* Construct at least two tabs with different profiles.
* Select `Duplicate Tab` option from the dropdown menu of the unfocused tab.
* Verify that the new tab has the same profile as the tab it was duplicated from.
Closes#13942
The breadcrumbs in the SUI were not readable by screen readers because they are represented as a button with a text block inside of it. Turns out, if you make the DataTemplate's item `IStringable` (meaning it has a `ToString()`), it all magically works! Allowing the screen reader to read the button as text.
Closes#13826
This PR adds support for the `DECARM` (Auto Repeat Mode) sequence, which
controls whether a keypress automatically repeats if you keep it held
down for long enough.
Note that this won't fully work in Windows Terminal until issue #8440 is
resolved.
Every time we receive a `KeyDown` event, we record the virtual key code
to track that as the last key pressed. If we receive a `KeyUp` event the
matches that last key code, we reset that field. Then if the Auto Repeat
Mode is reset, and we receive a `KeyDown` event that matches the last
key code, we simply ignore it.
## Validation Steps Performed
I've manually tested the `DECARM` functionality in Vttest and confirmed
that it's working as expected. Although note that in Windows Terminal
this only applies to non-alphanumeric keys for now (e.g. Tab, BackSpace,
arrow keys, etc.)
I've also added a basic unit test that verifies that repeated key
presses are suppressed when the `DECARM` mode is disabled.
Closes#13919
It turns out that the negative margin for the progress ring is causing
the clipping in case the tab title gets too long:
43dbbd590f/src/cascadia/TerminalApp/TabHeaderControl.xaml (L18-L27)
The negative margin was introduced in #8113 because the progress ring is
supposed to replace the tab icon but the `TabView` still reserves space
even if no icon is set (see
https://github.com/microsoft/terminal/pull/8133#issuecomment-739098014).
However, it is not actually the `TabView` reserving space even when
there is no icon, but a workaround for a crash in the
`IconPathConverter` that returns a `BitmapIconSource` with a `nullptr`
source instead of a `nullptr` `IconSource`:
43dbbd590f/src/cascadia/TerminalSettingsModel/IconPathConverter.cpp (L143-L154)
The workaround in `IconPathConverter` could probably be removed as I did
not find any instance where it is still used in a way that could trigger
the mentioned crash, but I did not dare to just remove it as I do not
know enough about the code by far. Hence, I opted to just locally
instantiate the `IconSource` with a `nullptr` directly in `TerminalTab`.
Fixes#8910
This PR adds support for the selective erase escape sequences: `DECSED`,
`DECSEL`, and `DECSCA`. They provide a way of marking certain areas of
the screen as "protected", so you can erase the content everywhere else
without affecting those protected areas.
This adds another bit in the `CharacterAttributes` enum to track the
protected status of each cell, and an operation triggered by the
`DECSCA` sequence which can toggle that bit in the active attributes.
There there are two new erase operations triggered by the `DECSED` and
`DECSEL` sequences, which work similar to the existing `ED` (erase in
display) and `EL` (erase in line) operations, but which only apply to
unprotected cells.
I've also updated the `DECRQSS` settings request, so you can query the
active protected attribute status.
## Validation Steps Performed
I've manually confirmed that we pass the selective erase tests in Vttest
now, and I've also manually tested some more complicated edge cases and
confirmed that we match the behavior of the hardware VT240 emulator in
MAME.
For unit testing I've extended the existing erase tests to cover
selective erase as an additional option, I've added a test covering the
`DECSCA` sequence, and I've extended the `DECRQSS` adapter test to
confirm the attribute reporting is working.
Closes#14029
The diff between the 22000 and 22621 SDKs is fairly small, but it does include
a number of C++ correctness fixes, updates to libraries like DirectXMath and
the latest updates to DirectWrite and DXGI which I make heavy use off.
## Validation Steps Performed
* It builds ✅
Adds UIA events to the WPF control for the following items:
- selection changed
- text changed (and output)
- cursor changed
### Automation Peer
Similar to the architecture of the UWP TermControl, we added a
`HwndTerminalAutomationPeer` which acts as the
`TermControlAutomationPeer` in UWP. However, we don't need a XAML
wrapper here, so really we just need it to inherit from
`TermControlUiaProvider` (the `ITextProvider` implementation shared
across conhost and WT) and `IUiaEventDispatcher` (the event dispatching
interface that is responsible for signaling the screen reader that
something has changed).
### Removing the local echo
As with WT, we need to record key events to remove the local echo. These
recorded events are matched up with the output text. Each sequential
match is removed in the output text so that it's not read by the screen
reader.
### Detecting what to send events for
As with WT, a `UiaEngine` was added to the renderer and it is set up
when a UIA client is detected. WT would normally stop sending events
when focus was lost from the control. We do the same here.
### Automation properties
`TermControlUiaProvider` was upgraded to support property values. Such
properties include class name and control type. These align with those
set in `TermControlAutomationPeer`. Realistically, those should point to
these, but that requires a lot more work and a localization burden
(because we need to move the localized word "terminal").
`HwndTerminalAutomationPeer` takes this a step further and overrides the
class name to be `WPFTermControl`. This allows screen readers to provide
special handling for the `WPFTermControl` vs the UWP term control since
they will be updating at different speeds.
### Build fixes
To build the WPF test app, I had to mess with the dependencies a little
bit. Really just add the atlas engine and uia renderer to the build
steps.
### HwndTerminal initialization
The initialization order with `WM_NCCREATE` was changed to match that of
Windows Terminal (BaseWindow/IslandWindow). This is safer now. I also
removed the `static` window because it was unnecessary.
### Handling `WM_GETOBJECT`
WPF's HwndHost likes to mark the `WM_GETOBJECT` message as handled to
force the usage of the WPF automation peer. We now explicitly mark it as
not handled and don't return an automation peer. This forces the message
to go down to the HwndTerminal where we return terminal's UiaProvider.
### Remove TermControl layer from UIA tree
TermContol (the top-most layer in the UIA tree) would pop up and not do
anything. This PR also overrides the automation peer at that layer and
marks IsContentElement/IsControlElement=false (the equivalent to
AccessibilityView=Raw). This makes the layer only appear in the UIA tree
if you are using the raw view (i.e. you know what you're doing and you
want to see each individual layer even if you can't directly interact
with it).
## Validation Steps Performed
Tested with Narrator/NVDA using WpfTerminalTestNetCore project in our
repo.
- [X] New output is read out (not just key events, but also other output
text)
- [X] Local echo does not occur (i.e. pressing 'A' should only read 'A'
once, not twice [key event and rendered letter]).
- [X] selection events are read out properly
- [X] cursor change events are read out properly (tested with text
cursor indicator preview in Settings App > Accessibility > Text
Cursor)
NOTE: test this with Release builds. Debug builds may be too slow and
not read out properly
Closes#12642
## Summary of the Pull Request
`InitialPosition` and `CenterOnLaunch` can now be edited in the SUI
## PR Checklist
* [x] Closes#9075
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
`InitialPosition` follows the same style as `LaunchSize`, with a number box for the x coordinate and a number box for the y coordinate. When there is no value for either of these coordinates, the respective number box is empty (and displays the text `Undefined`).
## Validation Steps Performed
They work
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Update Nuget used
This change fixes issues with certain fonts that draw _way_ outside the advance
width/height black box and expect to remain centered on the baseline.
## Validation Steps Performed
* Use MesloLGM Nerd Font
* Print U+E0B0
* Ensure it's centered, even if it's cut off ✅
if the bot adds it, then the issue will get added to the project before the bot gets a chance to add the triage label. Just start with the triage label.
This commit changes the glyph scale algorithm to prefer aligning glyphs to
their baseline. This improves the visual appearance of simulated italic glyphs.
However wide Emojis in narrow cells now look slightly worse without centering.
Closes#13987
## Validation Steps Performed
* Use FiraCode which has no italic variant and instead uses simulated italics
* Write italic text
* Baseline is consistent ✅
`ConptyClosePseudoConsole` blocks until OpenConsole exits.
This is problematic for the changes in 666c446, which stopped calling that
function on a background thread to solve a race condition. This commit fixes
the potential lags/deadlocks from waiting on OpenConsole's exit, by adding
`ConptyClosePseudoConsoleNoWait` which only closes the IO handles and allows
OpenConsole to exit naturally. This uncovered another potential deadlock
in `ServiceLocator::RundownAndExit` which might call itself recursively.
Closes#14032
## Validation Steps Performed
* Print tons of text and concurrently close the tab.
Tab closes, OpenConsole/pwsh exits instantly ✅
* Use `Enter-VsDevShell` and close the tab.
Tab closes instantly, OpenConsole/pwsh exits after ~5 seconds ✅
When we first introduced the shell extension, it didn't work properly
for some folders (such as the Desktop, or perhaps any "background"
click) due to a bug in Windows. We worked around that bug with the help
of an awesome community member, who contributed code that would pull up
the topmost Explorer window and query its location.
That Windows bug was eventually fixed, but we still had trouble with
items appearing correctly. On Windows 11, the Open in Terminal menu item
appears and disappears at random when you right-click the desktop, but
it always appears when you right-click a folder. It sometimes appears
for Quick Access, even though it shouldn't.
We tried to fix that in #13206, but the fix caused more issues than it
solved. We reverted it for 1.15 and 1.16.
At the end of the day, it turns out that getting the path from the
toplevel explorer window is fragile. Fortunately, the shell does offer
us a way to get that information: the site chain.
This pull request replaces GetPathFromExplorer() with an implementation
of `IObjectWithSite`, which allows us to use the site chain to look up
from whence a context menu request was initiated. It also makes item
lookup generally more robust.
* ✅ Tested on Windows 11
* ✅ Desktop
* ✅ Folder Background
* ✅ Folder Selected
* ✅ Quick Access (does not appear)
* ✅ This PC (does not appear)
* ✅ Tested on Windows 10
* ✅ Desktop
* ✅ Folder Background
* ✅ Folder Selected
* ✅ Quick Access (does not appear)
* ✅ This PC (does not appear)
References #13206
References #13523Closes#12578
Co-authored-by: John Lueders <johnlue@microsoft.com>
This fixes#3454 by adding support for an "always" mode for the scroll bar.
This change uses a custom VisualStateManager to keep the scroll bar from collapsing if the profile is using the 'always' setting.
## Validation Steps Performed
Tried updating settings.json directly and using the UI and making sure the scroll bar behaves as expected.
Closes#3454
We're using this in UnicodeStorage!
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 828282c76d559ae2dbbee4288796a939e7f869f8
Related work items: MSFT-41396187
There's a different behavior regarding cursors between conhost and Windows
Terminal. In case of the latter we don't necessarily call `PaintCursor`
during cursor movement, because the cursor blinker never stops "blinking".
Closes#14028
## Validation Steps Performed
* Enter text until after the line wraps
* Hold backspace until the line unwraps
* No leftover cursor on the second line ✅
This fixes an issue with c51bb3a, where some fractional font
sizes are displayed as something like 13.600000000001.
Closes#14024
## Validation Steps Performed
* Enter a font size of 13.6 and save
* NumberBox displays "13.6" ✅
This PR attempts to simplify the `TextAttribute` class by merging the
two fields that were previously storing the "legacy" attributes and the
"extended" attributes separately.
When the `TextAttribute` class is initialized with a legacy value, we
were masking off the `META_ATTRS` bits to store in the `_wAttrLegacy`
field, and then additionally clearing the `COMMON_LVB_SBCSDBCS` bits,
so there were only 5 bits that were actually used in the end. We also
had an additional `_extendedAttrs` field holding other VT attributes,
which only used 8 of its available 16 bits.
In this PR I've now merged the the two sets of attributes into one enum,
so they all fit in a single 16-bit value. The legacy attributes retain
the same bit positions they originally had, so we can mask them off from
an incoming legacy value as we did before. I've just simplified the
process somewhat by creating a `USED_META_ATTRS` mask that covers the
exact subset of meta attributes that we care about.
The new enum that holds the combined attributes has now been named
`CharacterAttributes` rather than `ExtendedAttributes`, since that seems
to be the term typically used in VT documentation. This covers both
rendition/visual attributes and logical attributes (not yet used, but we
will need them at some point to support selective erase operations).
While making these changes I also noticed the `IsLeadingByte` and
`IsTrailingByte` methods weren't actually used anywhere, and weren't
correctly implemented anyway, so I've removed those now.
## Validation Steps Performed
I've manually run a number of attribute test scripts which cover both
legacy and VT operations, and everything still appears to be working
correctly.
Closes#14031
After this commit a user may specify fractional font sizes.
Support was only implemented for AtlasEngine however.
DxEngine continues to use rounded (integer) font sizes.
Closes#6678
## Validation Steps Performed
* Install a bitmap font that requires fractional font sizes
(e.g. Terminus TTF, https://files.ax86.net/terminus-ttf/)
* Set font size to something integer (e.g. 14pt)
Glyphs are blurry ✅
* Set font size to something fractional (e.g. 13.5pt)
Glyphs are crisp ✅
This commit fixes several issues:
* Some fonts set a line-gap even though they behave as if they
don't want any line-gaps. Since Terminals don't really have
any gaps anyways, it'll now not be taken into account anymore.
* Center alignment breaks bitmap glyphs which expect left-alignment.
* Automatic "opsz" axis makes Terminus TTF's italic glyphs look quite
weird. I disabled this feature as we might not need it anyways.
A complete fix depends on #14013Closes#14006
## Validation Steps Performed
* Use Terminus TTF at 13.5pt
* Print UTF-8-demo.txt
* No gaps between block characters ✅
If a rendering engine constantly throws error we'll effectively
denial-of-service our users by drowning them in warning popups.
This commit fixes the issue by limiting the retries in all cases.
Issue found in: #13985
## Validation Steps Performed
* Add a `THROW_HR(E_INVALIDARG);` in `AtlasEngine::StartPaint()`
* Launch Windows Terminal
* Only one warning popup shows up ✅
* Rendering is disabled until one clicks "resume" ✅
The `TileHashMap` refresh via `makeNewest()` in `StartPaint()` depends
on us filling the entire `cellGlyphMapping` row with valid data.
This commit makes sure to initialize the `cellGlyphMapping` buffer.
Additionally it clears the rest of the row with whitespace
until proper `LineRendition` support is added.
Closes#13962
## Validation Steps Performed
* vttest's "Test of double-sized characters" stops crashing ✅
* No weird leftover characters ✅
Direct3D 10.0 and 10.1 only have optional support for shader model 4.
This commit fixes our assumption that it's always present by checking
`ComputeShaders_Plus_RawAndStructuredBuffers_Via_Shader_4_x` first.
Closes#13985
## Validation Steps Performed
* Set feature level to 10.1 via `dxcpl`
* `CheckFeatureSupport` is called and doesn't throw ✅
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 4024b6933d446a359a35136053da8b4a8f598d9d
Related work items: MSFT-41327033
Disables strictness and warnings as errors for custom pixel shaders in
RELEASE. Windows terminal is not telling the user why the shader won't
compile which makes it very frustrating for the shader hacker.
After trying the recent preview none of my shaders loaded anymore in
Windows Terminal Preview which made me very sad. I had no idea what was
wrong with them. After cloning the git repo, building it, fighting an
issue that prevent DEBUG SDK from being used I finally was able to
identify some issues that were blocking my shaders.
> error X3556: integer modulus may be much slower, try using uints if possible.
> error X4000: use of potentially uninitialized variable (rayCylinder)
While the first one is a good warning I don't think it is an error and
the tools I use didn't flag it so was hard to know.
The second one I was staring at the code and was unable to identify what
exactly was causing the issues, I fumbled with the code a few times and
just felt the fun drain away.
IMHO: I want it to be fun to develop shaders for windows terminal.
Fighting invisible errors are not fun. I am not after building
production shaders for Windows Terminal, I want some cool effects. So
while I am as a .NET developer always runs with Warning as errors I
don't think it's the right option here. Especially since Windows
Terminal doesn't tell what is the problem.
However, I understand if the shaders you ship with Windows Terminal
should be free of errors and silly mistakes, so I kept the stricter
setting in DEBUG mode.
## Validation Steps Performed
Loaded Windows Terminal in RELEASE and DEBUG mode and validated that
RELEASE mode had reduced strictness but DEBUG retained the previous more
restrictive mode.
docs: https://github.com/marketplace/actions/add-to-github-projects?version=v0.3.0
Hey maybe we should use more actions. This was thrown out during the last GH sync. Hopefully this doesn't explode.
This _should_ add all issues that don't have one of `Issue-Feature`, `Needs-Triage`, `Needs-Author-Feedback`, `Issue-Scenario` to the project board. That should just leave all the bugs and tasks that have been triaged.
I didn't go for
```yml
labeled: Issue-Task, Issue-Bug
label-operator: OR
```
since those would include untriaged ones.
There's also no way to filter on milestone currently, so this will likely add icebox issues. We'll need to remove those manually as needed.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_we_adept_e4d2 7ea9457533db712ee8e8a5a11e1fbbdfc9430027
Related work items: MSFT:40841395
This replaces ~70k LOC (parts of boost, 1/4th of the code in this project)
with ~700 LOC (`small_vector.h`). By replacing boost, we simplify future
maintenance and improve compile times.
## Validation Steps Performed
* New and existing unit tests are ok ✅
* Various common VT applications run fine in debug mode OpenConsole ✅
This PR introduces a mechanism for passing through downloadable soft
fonts to the conpty client, so that we can support DRCS (Dynamically
Redefinable Character Sets) in Windows Terminal.
Soft fonts were first implemented in conhost (with the GDI renderer) in
PR #10011, and were implemented in the DX renderer in PR #13362.
The way this works is by passing through the `DECDLD` sequence
containing the font definition, but with the character set ID patched to
use a hardcoded value (this is to make sure it's not going to override
the default character set). At the same time we send through an `SCS`
sequence to map this character set into the G1 table so we can easily
activate it.
We still need to process the `DECDLD` sequence locally, though, since
the initial character set mapping take place on the host side. This gets
the DRCS characters into our buffer as PUA Unicode characters. Then when
the VT engine needs to output these characters, it masks them with `7F`
to map them back to ASCII, and outputs an `SO` control to activate the
soft font in the conpty client.
## Validation Steps Performed
I've manually tested with a number of soft fonts and applications that
make use of soft fonts. But if you're testing with the VT320 fonts from
the vt100.net collection, note that you'll need to enable the ISO-2022
coding system first, since they use 8-bit C1 controls.
When we added support for the `DECAC1` control sequence, which
determines whether `C1` controls are accepted or not, the intention was
that conhost would be making that determination, and Windows Terminal
would always be expected to accept any passed-through `C1` controls.
However, this didn't take into account that a passed-through `RIS`
sequence could end up disabling `DECAC1`, and that would leave Windows
Terminal incapable of processing any `C1` controls. This PR attempts to
fix that oversight.
The `DECAC1` sequence was added in PR #11690, when we disabled `C1`
acceptance by default.
This is a bit of a hack, but I've added a new `AlwaysAcceptC1` mode to
the state machine, which is enabled at startup in the Terminal, and is
never disabled. The parser then just needs to check whether either
`AcceptC1` or `AlwaysAcceptC1` are set.
## Validation Steps Performed
I've manually confirmed the test case in #13968 now works as expected.
Closes#13968
This PR introduces a mechanism for passing through line rendition
attributes to the conpty client, so we can support double-width and
double-height text in Windows Terminal.
Line renditions were first implemented in conhost (with the GDI
renderer) in PR #8664, and were implemented in the DX renderer in PR
#13102.
By default this won't add any additional overhead to the conpty output,
but as soon as there is any usage of double-size text, we switch to a
mode in which every line output will be prefixed with a line rendition
sequence. This is to ensure that the line attributes in the client
terminal are always in sync with the host.
Since this does add some overhead to the conpty output, we'd prefer not
to remain in this mode longer than necessary. So whenever there is a
full repaint of the entire viewport, we check to see if all of the lines
are single-width. If that is the case, we can then safely skip the line
rendition sequences in future updates.
One other small optimization is when the conpty update is only writing
out a single character (this is something we already check for). When
that is the case, we can safely skip the line rendition prefix, because
a single character update should never include a change of the line
rendition.
## Validation Steps Performed
I've manually tested that Windows Terminal now passes the double-size
tests in _Vttest_, and also confirmed various edge cases are working
correctly in my own double-size tests.
Closes#11595
Our Windows branch name changed, and I took this opportunity to resolve
an issue where vpack builds would occasionally fail due to GitHub rate
limiting the Azure DevOps IP addresses.
`ATLAS_POD_OPS` doesn't check for `has_unique_object_representations` and so a
bug exists where `CachedCursorOptions` comparisons invoke undefined behavior.
The color of inactive tab text is incorrect since #13689 due to the introduction
of `til::color::layer_over` which incorrectly calculated the RGB values.
## Validation Steps Performed
* Added unit tests ✅
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
This commit reduces the amount of telemetry during general usage by about half.
8 events that weren't really used anymore were removed.
1 new event was added ("AppInitialized") which will help us investigate #5907.
During review 9 events were found that were incorrectly tagged as perf. data.
## Validation Steps Performed
* Launch Windows Terminal
* The "latency" field "AppInitialized" matches the approx. launch time ✅
When Leonard updated CLI11 in #12658, he imported a version that no
longer requires RTTI. Since CLI11 was the only reason we had enabled
RTTI in any of our projects, we're finally able to turn it off.
| | TerminalApp.dll | MSIX Package |
| ------ | ---------------:| ------------:|
| Before | 3180KiB | 6545KiB |
| After | 1970KiB | 6426KiB |
| Delta | **-1210KiB** | **-119KiB** |
With AtlasEngine being enabled by default in 1.16 Preview it would look weird
if the `useAtlasEngine` option would still be called "experimental".
Additionally we're interested in how many users opt out of useAtlasEngine,
indicating major issues that would require us to disable it by default again.
Related to #13936
## Validation Steps Performed
* Toggling `useAtlasEngine` works as expected ✅
* Observe new event with TVPP ✅
- fix: if a selection exists, mark mode should promote the existing selection instead of creating one at the cursor
- fix: mark mode --> move to middle of a word --> ExpandSelectionToWord --> Shift+Right/Left had some weird behavior. Fix that
- fix: Ctrl+enter on random selection clears selection. It should try to treat selection as a URL.
## References
#13854
NOTE: 3b53f3c can be serviced
As noted by the `winrt::event` documentation:
> [...] But for asynchronous events, even after revoking [...], an in-flight
> event might reach your object after it has started destructing.
This is because while adding/removing/calling event handlers might be
thread-safe, there's no guarantee that they run mutually exclusive.
This commit fixes the issue by reverting 6f0f245. Since we never checked
the result of closing a terminal connection anyways, this commit simply drops
the wait on the connection being teared down to ensure #1996 doesn't regress.
Closes#13880
## Validation Steps Performed
* Open tab, close tab, open tab, close tab, open tab, close tab
* ConPTY ✅
* Azure ✅
* Closing a tab with a huge amount of panes ✅
* Opening a bunch of tabs and then closing the window ✅
* Closing a tab while it's busy with VT ✅
* `wtd -w 0 nt cmd /c exit` ✅
* `wtd -w -1 cmd /c exit`
* No WerFault spawns ✅
This PR adds support for the `DECBKM` sequence, which provides a way for
applications to specify whether the `Backspace` key should generate a
`BS` character or a `DEL` character.
On the original VT100 terminals, the `Backarrow` key generated a `BS`,
and there was a separate `Delete` key that generated `DEL`. However, on
the VT220 and later, there was only the `Backarrow` key. By default it
generated `DEL`, but from the VT320 onwards there was an option to make
it generate `BS`, and the `DECBKM` sequence provided a way to control
that behavior programmatically.
On modern terminals, the `Backspace` key serves as the equivalent of the
VT `Backarrow`, and typically generates `DEL`, while `Ctrl`+`Backspace`
generates `BS`. When `DECBKM` is enabled (for those that support it),
that behavior is reversed, i.e. `Backspace` generates `BS` and
`Ctrl`+`Backspace` generates `DEL`.
This PR also gets the other `Backspace` modifiers more closely aligned
with the expected behavior for modern terminals. The `Shift` modifier
typically has no effect, and the `Alt` modifier typically prefixes the
generated sequence with an `ESC` character.
While not strictly related to `DECBKM`, I noticed while testing that the
`_SetInputMode` method was doing unnecessary work that was specific to
the `FocusEvent` mode. I've now moved that additional processing into
the `EnableFocusEventMode` method, which I think makes things somewhat
simpler.
## Validation Steps Performed
I've tested the basic `DECBKM` functionality in Vttest, and I've
manually tested all the modifier key combinations to make sure they
match what most modern terminals generate.
I've also added a unit test that confirms that the expected sequences
are generated correctly when the `DECBKM` mode is toggled.
Closes#13884
In testing the following issues were found in AtlasEngine and fixed:
1. "Toggle terminal visual effects" action not working
2. `d2dMode` failed to work with transparent backgrounds
3. `GetSwapChainHandle()` is thread-unsafe due to it being called outside
of the console lock and with single-threaded Direct2D enabled
4. 2 swap chain buffers are less performant than 3
5. Flip-Discard and `Present()` is less energy efficient than
Flip-Sequential and `Present1()`
6. `d2dMode` used to copy the front to back buffer for partial rendering,
but always redraw the entire dirty region anyways
7. Added support for DirectX 9 hardware
8. If custom shaders are used not all pixels would be presented
Closes#13906
## Validation Steps Performed
1. Toggling visual effects runs retro shader ✅
With a custom shader set, it toggles the shader ✅
Toggling `experimental.rendering.software` toggles the shader ✅
2. `"backgroundImage": "desktopWallpaper"` works with D2D ✅ and D3D ✅
3. Adding a `Sleep(3000)` in `_AttachDxgiSwapChainToXaml` doesn't break
Windows 10 ✅ nor Windows 11 ✅
4. Screen animations run at 144 FPS ✅ even while moving the window ✅
5. No weird artefacts during cursor movement or scrolling ✅
6. No weird artefacts during cursor movement or scrolling ✅
7. Forcing DirectX 9.3 in `dxcpl` runs fine ✅
This reverts commit f785168aac (PR #13244)
The error logged to NVDA was caused by the following line of code in `_getTextValue()`:
`THROW_HR_IF(E_FAIL, !bufferSize.IsInBounds(_start) || !bufferSize.IsInBounds(_end));`
NVDA would expand a text range to encompass the document in the alt buffer. This means that the "end" would be set to the dangling "endExclusive" point (x = left, y = one past the end of the buffer). This is a valid range!
However, upon extracting the text, we would hit the code above. The exclusive end doesn't actually point to anything in the buffer, so we would falsly throw `E_FAIL`.
Though this could be fixed by adding a special check for the `endExclusive` in the line above, I suspect there are other places throughout the UIA code that hit this problem too. The safest course of action is to revert this commit entirely since it was a code health commit (it doesn't actually close an issue).
Closes#13866
This is conjecture - I was totally unable to repro the original crash here.
Based on the stacks in MSFT:39994969, it looks like we try to fire off a
`RaiseAutomationEvent`, which calls through UIA core, eventually to the point of
calling `ComPtr<WUX::Automation::Peers::IAutomationPeer>::{dtor}`. I'm guessing
based on the stacks that the TermControl has already been released and cleaned
up. However, the lambda in the `RunAsync` calls here only takes a ref to the
TCAP. The TCAP has an outstanding reference (maybe on the other side of the UIA
fence), and gets successfully resolved as strong, but when calling to
`RaiseAutomationEvent`, the `owner` we passed in is gonezo.
This explicitly passes a `weak_ref` to `TermControlAutomationPeer`, rather than
a raw ptr, so we can actually check if the control is still alive before _we_
dereference it. If it is, great, we've got a strong ref to it now and it won't
get torn down.
Again, this is hearsay. Without a repro, the only way we can confirm this is
gone is by just hoping the crashes go away. 🤞
* Might close#13357 (we'll reopen if it doesn't?)
* narrator still works
## Summary of the Pull Request
Fix a bug where if you pressed the "Save" button, WT would crash. This was caused by adding the possibility that no color scheme is selected in the main page. With no "current scheme", attempting to get its "name" would cause a null ptr exception.
The fix is simple: just check if we actually have a current scheme.
Bonus points: if we don't have a current scheme, don't bother looking throught the color schemes for a match because we'll never find one.
## References
#13269 - Color Schemes Rejuv
## Summary of the Pull Request
As described in #9583, this change implements the legacy conhost "EnableColorSelection" feature.
## Detailed Description of the Pull Request / Additional comments
@zadjii-msft was super nice and provided the outline/plumbing (WinRT classes and such) as a hackathon-type project (thank you!)--a "SelectionColor" runtimeclass, a ColorSelection method on the ControlCore runtimeclass, associated plumbing through the layers; plus the action-and-args plumbing to allow hooking up a basic "ColorSelection" action, which allows you to put actions in your settings JSON like so:
```json
{
"command":
{
"action": "experimental.colorSelection",
"foreground": "#0f3"
},
"keys": "alt+4"
},
```
On top of that foundation, I added a couple of things:
* The ability to specify indexes for colors, in addition to RGB and RRGGBB colors.
- It's a bit hacky, because there are some conversions that fight against sneaking an "I'm an index" flag in the alpha channel.
* A new "matchMode" parameter on the action, allowing you to say if you want to only color the current selection ("0") or all matches ("1").
- I made it an int, because I'd like to enable at least one other "match mode" later, but it requires me/someone to fix up search.cpp to handle regex first.
- Search used an old UIA "ColorSelection" method which was previously `E_NOTIMPL`, but is now wired up. Don't know what/if anything else uses this.
* An uber-toggle setting, "EnableColorSelection", which allows you to set a single `bool` in your settings JSON, to light up all the keybindings you would expect from the legacy "EnableColorSelection" feature:
- alt+[0..9]: color foreground
- alt+shift+[0..9]: color foreground, all matches
- ctrl+[0..9]: color background
- ctrl+shift+[0..9]: color background, all matches
* A few of the actions cannot be properly invoked via their keybindings, due to #13124. `*!*` But they work if you do them from the command palette.
* If you have "`EnableColorSelection : true`" in your settings JSON, but then specify a different action in your JSON that uses the same key binding as a color selection keybinding, your custom one wins, which I think is the right thing.
* I fixed what I think was a bug in search.cpp, which also affected the legacy EnableColorSelection feature: due to a non-inclusive coordinate comparison, you were not allowed to color a single character; but I see no reason why that should be disallowed. Now you can make all your `X`s red if you like.
"Soft" spots:
* I was a bit surprised at some of the helpers I had to provide in textBuffer.cpp. Perhaps there are existing methods that I didn't find?
* Localization? Because there are so many (40!) actions, I went to some trouble to try to provide nice command/arg descriptions. But I don't know how localization works…
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9583
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed *(what would be the right place to add tests for this?)*
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated. *(is this needed?)*
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Just manual testing.
This commit stores a hash of the `settings.json` file in `ApplicationState`
with which we can detect whether the settings contents actually changed.
Since I only use a small 64-bit hash as opposed to SHA2 for instance,
I'm taking the last write time of the file into account as well.
This allows us to skip calling `UpdateJumplist` at least the majority of app
launches which hopefully improves launch performance on devices with slower IO.
Part of #5907.
## Validation Steps Performed
* Delete some profiles (see above), save settings, tasks are gone ✅
FYI For some (...) inexplicable reason, shell task lists are preserved forever
even if msix applications are uninstalled, etc. So to test whether tasks are
properly written on first app launch we have to delete some profiles/tasks
first, otherwise we can't see whether they're actually written later.
* Now exit Windows Terminal, delete `settings.json` and relaunch
* All tasks are back ✅
* With a debugger, ensure that `CascadiaSettings::WriteSettingsToDisk`
generates the same hash that `LoadAll` reads. ✅
Update the color schemes page with the new Win 11 style.
With the rejuvenated experience, we now have two pages:
- `ColorSchemes.xaml`: "color scheme selection" page
- This is the starting page for the "color schemes" nav view
item. It is intended to have the user select a color scheme
they want to modify. The user can also click the "Add new"
button to add a new color scheme or the "delete" button to
delete the selected scheme.
- If a scheme cannot be deleted, the delete button is disabled
and a disclaimer is shown.
- A "set as default" button sets the selected scheme as the
color scheme for profiles.default (aka "base layer").
- The list view item for each scheme includes the name of the
scheme, the default tag (if the scheme is the one set in base
layer), a text preview of the foreground/background, and a
grid of 16 color chips showing the colors for the scheme.
- Implementation details:
- View - `ColorSchemes`:
- "Enter" --> edit the selected scheme
- "Delete" --> delete the selected scheme
- if the selected scheme cannot be deleted, we
show the disclaimer
- View model - `ColorSchemesPageViewModel`
- when possible, the XAML binds directly to the
view model functions. Thus, we include logic
to delete, edit, and set the selected scheme
as default.
- store the current page, so that we know which
page to navigate to upon saving/discarding
changes.
- `EditColorScheme.xaml`: "color scheme modification" page
- a terminal preview of the color scheme is shown at the top of
the page.
- all colors for the scheme are displayed as color chips in an
expander that starts as expanded.
- renaming a color scheme is also inside an expander, but
there's no need for "renaming mode" anymore
- Implementation details:
- View - `EditColorScheme`:
- include logic to display the disclaimer and
add the automation properties
- include logic for "Enter" and "Escape" in the
rename editor
- View Model - `ColorSchemeViewModel`:
- as before, when possible, the XAML binds
directly to the view model functions.
- To enable the "default" tag functionality, we
had to expose knowledge of being the default
via "IsDefaultScheme()" which compares the
current name to the one in the settings model.
- Miscellaneous implementation details:
- to get the expander to start as expanded, we had to modify the
setting container style.
- Since "set as default" is a button on the selector page, we
needed a way to refresh the view model's knowledge of being
the default. So we added a `RefreshIsDefault` API to the
`ColorSchemeViewModel` to notify changes.
- With the new layout, we no longer need an 'enter rename mode'
button, so all that logic has been removed
- Add logic to `MainPage` to handle navigating to the correct
page upon saving/discarding changes.
Closes#9775
Co-authored-by: Carlos Zamora <cazamor@microsoft.com>
See also:
33732458ed/dev/SplitButton/SplitButton.xaml (L290-L293)
We need to
* Also set `SplitButtonForegroundSecondary` cause SplitButton's use that resource separately from the `Foreground()` property
* Manually trigger the visual state change, to refresh the brushes. We do something similar in TabBase
This is one of the bullet points in #13725
This commit implements support for `experimental.rendering.software`.
There's not much to it. It's just another 2 if conditions.
## Validation Steps Performed
* `"experimental.rendering.software": false` renders with D3D ✅
* `"experimental.rendering.software": true` triggers the new code path ✅
This commit implements support for custom shaders in AtlasEngine
(`experimental.retroTerminalEffect` and `experimental.pixelShaderPath`).
Setting these properties invalidates the device because that made it
the easiest to implement this less often used feature.
The retro shader was slightly rewritten so that it compiles without warnings.
Additionally we noticed that AtlasEngine works well with D3D 10.0 hardware,
so support for that was added bringing feature parity with DxRenderer.
Closes#13853
## Validation Steps Performed
* Default settings (Independent Flip) ✅
* ClearType (Independent Flip) ✅
* Retro Terminal Effect (Composed Flip) ✅
* Use wallpaper as background image (Composed Flip) ✅
* Running `color 40` draws everything red ✅
* With Retro Terminal Effect ✅
When selecting candidate history, priority is given to histories with empty commands list.
I think lazily calling `s_Allocate` will require a ton of rewriting. Also I think it is not an unexpended behavior that buffer is allocated when an application connects.
Closes#13571
## Summary of the Pull Request
Introduces a new action `expandSelectionToWord()` which expands the beginning and end of the selection to encompass the word(s) it's on. This was implemented as a conditional keybinding where the key chord is passed through to the terminal if no selection is active (similar to `copy()`).
It is not bound to anything by default.
## PR Checklist
* [x] Closes#8274
* [x] Schema updated.
## Validation Steps Performed
- Scenario in #8274:
- search for some text in the find dialog
- ESC to close the dialog
- execute `expandSelectionToWord()`
- the new selection encompasses the whole word
- mark mode
- move onto a word
- execute `expandSelectionToWord()`
- mouse selection (same as above)
- select a portion of two words --> new selection fully encompasses both words
Direct2D is able to detect remote connections and will switch to sending
draw commands across RDP instead of rendering the data on the server.
This reduces the amount of data that needs to be transmitted as well
as the CPU load of the server, if it has no GPU installed.
This commit changes `AtlasEngine` to render with just Direct2D if a software or
remote device was chosen by `D3D11CreateDevice`. Selecting the DXGI adapter the
window is on explicitly in the future would allow us to be more precise here.
This new rendering mode doesn't implement some of the more fancy features just
yet, like inverted cursors or coloring a single wide glyph in multiple colors.
It reuses most existing facilities and uses the existing tile hash map to cache
DirectWrite text layouts to improve performance. Unfortunately this does incur
a fairly high memory overhead of approximately 25MB for a 120x30 viewport.
Additional drive-by changes include:
* Treat the given font size exactly as its given without rounding
Apparently we don't really need to round the font size to whole pixels
* Stop updating the const buffer on every frame
* Support window resizing if `debugGeneralPerformance` is enabled
Closes#13079
## Validation Steps Performed
* Tested fairly exhaustively over RDP ✅
More or less, as in #13554
* Dark theme by default (was `system`)
* Justification:
> I think the interesting thing that we have today is that the color
> scheme is dark by default, but our window theme is set to system.
> System theme in Windows 11 is defaulted to light unless changed by
> the user. Now, we have a conflict between the theme and color scheme
> in Terminal.
>
> I think our options become, make the color scheme match "default"
> and set it to a light color scheme if the system theme is light, or
> manually match the theme to the color scheme by setting it to dark.
>
> Given that Terminal has historically had a black background with
> its Campbell color scheme, for a consistent UI experience, I'm
> voting to change the window theme to be dark by default as well.
* `tab.background: terminalBackground`
* Change the tab row colors back to "what they were pre-Controlsv2" more
or less
- The ramp is based off of "Light tab row background from Edge's
unfocused titlebar color, inactive tab row color BG from the
controlsv1 colors"
* `tabRow.unfocusedBackground` set `Transparent`
Closes#13554
Does what it sounds like on the label.
This is important, because when unset, the tab will use the active `Background` color to create an inactive BG, which maybe isn't what we want. Consider:
- a bright cyan active BG,
- and `terminalBG` for the `tabRow` bg.
Without an unfocusedBackground setting, all the tabs will still appear cyan when unfocused, which is extra gross.
As a judgement call, I made `terminalBackground` and `accent` use 30% opacity when set, to match the existing coloration.
See also #13554. If we want to make the default theme `tab.background: terminalBackground`, we should make `tab.unfocusedBackground` transparent (`#00000000`) by default. Otherwise, a Campell (`#0c0c0c`) tab on _any_ tab row will still have a faint tab visible.
* closes#13684
* closes#13246
* tested manually
This also does a lot of code shuffling, to get SettingsUI tabs to behave sensibly. We want those tabs to have (`#0c0c0c`, `#ffffff`) colored BGs for `terminalBackground` (see mail thread).
We also don't want dark focused tabs colors, combined with light tab row colors, combined with transparent unfocused tabs, to result in unfocused tabs having white-on-white text. That's gross. So that's been added to this PR in b38b704.
This pull request adds the JSON schema for `cgmanifest.json`.
## FAQ
### Why?
A JSON schema helps you to ensure that your `cgmanifest.json` file is valid.
JSON schema validation is a build-in feature in most modern IDEs like Visual Studio and Visual Studio Code.
Most modern IDEs also provide code-completion for JSON schemas.
### How can I validate my `cgmanifest.json` file?
Most modern IDEs like Visual Studio and Visual Studio Code have a built-in feature to validate JSON files.
You can also use [this small script](https://github.com/JamieMagee/verify-cgmanifest) to validate your `cgmanifest.json` file.
### Why does it suggest camel case for the properties?
Component Detection is able to read camel case and pascal case properties.
However, the JSON schema doesn't have a case-insensitive mode.
We therefore suggest camel case as it's the most common format for JSON.
### Why is the diff so large?
To deserialize the `cgmanifest.json` file, we use [`JSON.parse()`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/JSON/parse).
However, to serialize the JSON again we use [`prettier`](https://prettier.io/).
We found that, in general, it gave smaller diffs than the default [`JSON.stringify()`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/JSON/stringify) function.
Since locking the console can take a non-trivial amount of time,
the main thread might have already released the ControlCore instance, while the
`UpdatePatternLocations` background thread is holding the last active reference.
If the function call goes out of scope, we destroy the instance, which might
not be safe, considering its members are usually only used by the main thread.
This commit fixes the issue by only holding a reference of the `Terminal`.
## Validation Steps Performed
* Patterns are recognized ✅
See https://github.com/microsoft/terminal/issues/12176#issuecomment-1199488906, and MSFT:39723014.
I have literally no idea how to repro this one, or debug it. The dump I looked at looked like there was a `SwapChainScaleChanged` that was being dispatched as the app was tearing down. The `ControlCore` had started closing, but the `TermControl` hadn't yet. Apparently, just none of the `_refreshSizeUnderLock` callers checked if we were already closing.
All the callers appear to be on the main thread.
Closes#12176
Since there's no real way for me to repro this manually, I'm thinking we fire this fix off to the OS terminal build, where we'll pretty quickly be able to see if this fixed it or not.
While having a debugger attached, opening the settings tab generates an
uncomfortable amount of exceptions. This change reduces this by a lot.
## Validation Steps Performed
* Icons still appear ✅
This PR introduces a new action for closing all unfocused / other panes within a tab.
**Edit (17-08-2022):** Read-only panes are ignored when this action is being used (i.e., left open).
## Validation Steps Performed
The action was manually tested by applying it to various 'compositions' of panes. This includes tests on read-only panes.
Closes#12216
This PR by itself doesn't _really_ change much. Technically, now the Terminal will respect the Title of a `.lnk` when started for defterm, but we don't do anything else yet. Primarily, the goal of this PR is to just wire up startup info in OpenConsole to the connected Terminal.
* This required a bit of changes in `srvinit.cpp:ConsoleEstablishHandoff` to replicate other bits of startup, where we crack open the connect message to get the relevant bits of info.
* We pack that all into a `TERMINAL_STARTUP_INFO`, which we pass along to the registered terminal application.
* `ConptyConnection` accepts the handoff, and gathers that information out of the `TERMINAL_STARTUP_INFO`
* Some other updates to the scratch sln were made to make it build again (related, but unimportant).
* This is a precursor to:
* #13111
* #12154
* Closes#9458
* Tested manually
* I work here
## Summary of the Pull Request
The command palette (and tab search by extension) doesn't ever tell screen readers what is selected. Here, we simply hook up the selection changed event to a function that tells the screen reader what is selected. With this, the user no longer has to tab into the list view to know what is selected!
Will resolve the following bug upon validation from a11y team: #12065
## Validation Steps Performed
Performed repro steps from #12065.
NOTE: we do NOT read the selected item when the command palette is first opened. I think that's ok.
I got tired of renaming the packages that came out of our build
pipeline. I also got tired of the fact that every appxbundle artifact we
upload comes with another whole copy of Terminal for every architecture,
plus all their symbols. Those are reflected in other artifacts, so
there's no reason to duplicate them.
## Summary of the Pull Request
Polishes #13405 with some additional feedback found in testing and post-mortem reviews. Such feedback includes:
- [x] ControlInteractivity vs ControlCore split ([link](https://github.com/microsoft/terminal/pull/13405#discussion_r919365435))
- [x] clearing the selection should be under lock when copying text via "Enter"
- [x] move mark mode keybindings into a helper function
- [x] decide if "Enter" should be configurable or non-configurable ([link](https://github.com/microsoft/terminal/pull/13405#discussion_r919379305))
- [x] rename `_isTargetingUrl`
- [x] bugfix: ctrl+enter when the link is outside of the viewport
## References
Original PR: #13405
Relevant issue: #6649
Epic: #4993
Apparently, calling `GetText(INT_MAX)` causes a HUGE memory spike for a few seconds each time this is called. The [UIA docs](https://docs.microsoft.com/en-us/windows/win32/api/uiautomationcore/nf-uiautomationcore-itextrangeprovider-gettext#parameters) say to put `-1` if no limit is required, but I assume a few people have been hit by this before.
This addresses this issue (and similar ones) in two ways:
1. as we iterate over the lines of text, if we're already past the max length, just break out of the loop
2. _only_ resize if the max length is actually less than the current length. This prevents us padding the string with `L'\0'` erroneously (which is probably what causes the memory spike).
While debugging #13694, we discovered a very subtle bug we had accidentally introduced in a few places. `ViewModelHelper` defines a `PropertyChanged` event, backed by a `_propertyChangedHandlers` `event`. All opbservable properties in the viewmodels are supposed to run through that event. However, if you do `WINRT_CALLBACK(PropertyChanged, Windows::UI::Xaml::Data::PropertyChangedEventHandler)` in a derived class, it'll override that original method with the new one. XAML will subscribe to the second one, which is backed by `_PropertyChangedHandlers`, but the properties will still raise notifications on the callbacks registered to `_propertyChangedHandlers`.
This change makes it more explicit in these derived classes, that the `PropertyChanged` method exposed by these classes is indeed the one that's implemented in the base class.
This is a bit of a footgun, for sure. AuditMode would have apparently caught this, as we'd be overriding a method without using the `override` keyword.
Unblocks #13694.
In Global Appearance SUI, the toggle switch for "Always show tabs" is now grayed out when "Hide the title bar" is enabled (the default).
Also, the order of the settingcontainers was changed to help show the cause and effect more. See [this comment](https://github.com/microsoft/terminal/issues/12873#issuecomment-1094928881).
Closes#12873
After some deliberation I noticed that rounding the glyph advance up to yield
the cell width is at least just as wrong as rounding it. This is because
we draw glyphs centered, meaning that (at least in theory) anti-aliased
pixels might clip outside of the layout box on _both_ sides of the glyph
adding not 1 but 2 extra pixels to the glyph size. Instead of just `ceilf`
we would have had to use `ceilf(advanceWidth / 2) * 2` to account for that.
This commit simplifies our issue by just going with what other applications do:
Round all sizes (cell width and height) to the nearest pixel size.
Closes#13812
## Validation Steps Performed
* Set a breakpoint on `scaling Required == true` in `AtlasEngine::_drawGlyph`
* Test an assortment of Cascadia Mono, Consolas, MS Gothic, Lucida Console
at various font sizes (6, 7, 8, 10, 12, 24, ...)
* Ensure breakpoint isn't hit ✅
This tells us that no glyph resizing was necessary
This commit fixes two race conditions:
* `SetPseudoWindowCallback` set the `_pseudoWindowMessageCallback`
callback after the Win32 message thread was already spawned.
This issue was fixed by instead using the `ServiceLocator` to get
a hold of the global `VtIo` instance which is created statically.
* `XtermEngine::SetWindowVisibility` was called without holding the
console lock. This issue was fixed by simply acquiring it first.
Closes MSFT:40913882
## Validation Steps Performed
* Add `IsConsoleLocked()` assertion in `VtEngine::_Write`
* Run Windows Terminal
* No assertion failures ✅
## Summary of the Pull Request
This PR moves the key handling for mark mode into a helper method that is then called before an action/key binding is attempted.
## References
Epic: #4993Closes#13533
## Validation Steps Performed
- Add custom keybinding to "down" arrow key
- in mark mode --> selection updates appropriately
- out of mark mode --> keybinding executed
In #13024, we removed `Terminal::GetCursorPosition` from TerminalCore.
This has been widely regarded as a good move.
Now, you might rightly be wondering: why didn't compilation immediately
fail? Well. It turns out that there were _two_ copies of
`GetCursorPosition`. One for `const Terminal`, and one for `Terminal`.
This is important.
`Terminal::GetCursorPosition()` returned the cursor position relative to
the viewport. `Terminal::GetCursorPosition() const`, however, returns
the cursor position in absolute.
We removed the non-`const` one. Fortunately, thanks to the lookup rules
for `const`-qualified members, this didn't matter. Code that called
`GetCursorPosition()` still called `GetCursorPosition()`, and everything
was fine.
Except that part about the relative coordinates. That was not fine.
The TSF control is the _only_ consumer of `ControlCore.CursorPosition`,
and that was the _only_ consumer of relative-`GetCursorPosition()`.
This commit restores equilibrium by introducing a new
`GetViewportRelativeCursorPosition()` member to `Terminal` and switching
over the only consumer of relative cursor position to use it.
Closes#13769.
The absolute disgrace of a fix called 65b71ff failed to account for `std::move`
being unsafe to use for overlapping ranges. While `std::move` works for trivial
types (it happens to delegate to `memmove`), we need to dynamically switch
between that and `std::move_backward` to be correct.
Without this fix the LRU refresh is incorrect and might lead to crashes.
## Validation Steps Performed
I'm working on a new, pure D2D renderer inside AtlasEngine, which uses
the iterators contained in `_r.cellGlyphMapping` to draw text.
I noticed the bug, because scrolling up caused the text to be garbled
and with this fix applied it works as expected.
Fixes MSFT:38775539
Might also fix MSFT:38614563
Looking at this code should be pretty clear what's going on. On exit, the XAML root is already nulled out. But here, we're just yolo'ing and assuming it exists (why wouldn't it). So yea. This is like weirdly high percent of crashes internally, but that's not from real users. Real users, I suspect hit this as like .3% of our crashes. Not zero, but _low_.
* [x] tested manually
<hr>
May also be related to...
* MSFT:40602905
* MSFT:40602904
* MSFT:40412800
* MSFT:35213459 <---has links
Fixes MSFT:40853556
There's a small race here. The renderer thread in ConPTY might notice the terminal is gone, call CloseOutput, and release the vt renderer, and then the window proc fires and decides to minimize/restore the window, triggering an A/V.
I'm 100% confident that this has NEVER happened to a real user. But the test labs hit it so much that it makes up ~26% of our crashes.
I haven't tested this cause again, _it doesn't hit in the wild_
Rename `til::form_wchars` to `til::to_ulong` and
allow it to work with narrow `char`s.
This change will be used in #13429.
## Validation Steps Performed
* Loads `sc(...)` key bindings as expected ✅
* The change is thankfully fairly trivial if viewn with whitespace suppressed
We shouldn't add URLs into our binaries that we can't directly control.
This commit fixes the issue for URLs recently introduced in #13510.
Closes#13541
## Validation Steps Performed
This change is trivial enough that I simply opened the new redirects
in my browser, ensuring that they open the expected websites.
`debugGlyphGenerationPerformance` used to only test the performance of
text segmentation/parsing, so I renamed it to `debugTextParsingPerformance`.
The new `debugGlyphGenerationPerformance` actually clears the glyph atlas now.
Additionally this fixes a bug with `debugGeneralPerformance`:
If a `DXGI_SWAP_CHAIN_FLAG_FRAME_LATENCY_WAITABLE_OBJECT` is requested,
it needs to be used. Since `debugGeneralPerformance` is for testing without
V-Sync, we need to ensure that the waitable object is properly disabled.
## Summary of the Pull Request
Skips whitespace removal if pasted string is multiline
## PR Checklist
* [x] Closes#12387
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Tests passed
The last command in multiline paste now executes
Does two things:
* the first two commits: shakes up the way we reference MUX in our projects so we can actually just
```xml
<PropertyGroup Label="NuGet Dependencies">
<TerminalMUX>true</TerminalMUX>
</PropertyGroup>
```
Like every other dependency we have
* the last commit: update to MUX.2.7.3
This is the 1.14 PR, which should be appropriately cherry-picked through to `release-1.15` and `main`
(cherry picked from commit a277b56f6a)
Repurpose `Feature_AtlasEngine` to enable the atlas engine by default in Dev and Preview builds.
Introduce `Feature_ConhostAtlasEngine` to solely control atlas engine inclusion in conhost.
Closes#13745
We have a number of theories why #12607 is happening, one of which is that
some GPU drivers somehow rely on Win32 messages or similar which we process
on the main thread. If we then try to acquire the console lock on the main
thread, while the GPU-driver thread itself is holding that lock, we've got
ourselves a deadlock. This PR makes this less likely by running the repeat
offender `UpdatePatternLocations` on a background thread instead.
We have a number of other locations which acquire the console lock on the
main thread and a thorough bug fix must be done in a different way.
## Validation Steps Performed
* After pasting an URL it gets underlined on hover ✅
Currently "Inverse Cursor" is actually simply bitwise inversed.
It works fine, except when it does not, namely in the middle of the spectrum:
Anything close enough to dark grey (index 8, RGB(128, 128, 128) in the
classic palette) will for obvious reasons become almost the same dark grey
again after the inversion.
The issue is addressed by additionally `XOR`ing the inverted color with
RGB(63, 63, 63). This distorts the result enough to avoid collisions
in the middle. Ultimately this restores the behavior that was in
Windows Console since the Middle Ages (and still exists in ConhostV1.dll).
## PR Checklist
* [x] Closes#3647
* [x] CLA signed
* [x] Tests added/passed
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #3647
## Validation Steps Performed
1. Open OpenConsole.
2. Properties, Terminal, Cursor Colors, choose Inverse Color.
3. Optionally set the RGB value of the 8th color in the standard palette to RGB(128, 128, 128) on the Colors tab, but the default one will do too.
4. Type `color 80` to see black text on dark grey background.
5. Make sure the inverted cursor is visible.
6. Repeat in WT with both default and experimental renderers.
## Summary of the Pull Request
Changes the way `_addCommandsForArg` determines if the delimiter was at the beginning of the argument so that it accounts for the fact that match includes the last character of the string before it.
## PR Checklist
* [x] Closes#13277
## Validation Steps Performed
`wt -p "u"; nt -p "u"` does not cause an error
This commit builds directly on the changes made in #13677 and fixes:
* TSF resetting to AlphaNumeric ("ASCII") input mode when pressing enter
* Vietnamese IME not composing a new word after pressing whitespace, etc.
Closes#11479Closes#13398
## Validation Steps Performed
* Japanese IME (Full-Width Katakana)
Typing "saitama" produces "サイタマ" ✅
* Korean IME
Typing "gksrmf" produces "한글" ✅
* Vietnamese IME
Typing "xin chaof" produces "xin chào" ✅
* Emoji Picker (Win+.)
✅
Adds a variable `_isBackgroundLight` that is updated when the background
color is changed. When it is `true`, the BEL indicator flash will darken
the screen instead of brightening.
`_isColorLight(bg)` returns `true` if the average of `r`, `g`, and `b`
is >127
I was unsure of an appropriate way to change the color of the
`CompositionLight` based on the background, so I changed it to always be
gray and adjusted the intensity values of the original animation to have
roughly the same visual effect as the white.
## Validation Steps Performed
* Tested the two flashes on the default color schemes and some custom
background colors to see if they look consistent
* Used tracepoints and visual to check that the right animation is used
(including multiple tabs, split windows with different themes, and
changing settings while window is open)
References #9270Closes#13450
This pull request reintroduces aliases for `VkKeyScanW`,
`MapVirtualKeyW` and `GetKeyState` that redirect through ConIoSrv on
OneCore devices.
We made an assertion in PR !7096375 that those APIs were hosted in an
extension APIset that was present on all OneCore devices. It turned out
that this was _incorrect_: that APIset extension is only hosted on
OneCoreUAP and above.
This would not be a problem save for NanoServer. NanoServer is built on
top of OneCore.
As Nano is a container host OS, it is primarily interfaced vith via
ConPTY... which exercises the VkKeyScanW/MapVirtualKeyW codepaths quite
a bit. Those APIs started returning invalid data, which caused us to
convert all incoming keyboard events into numpad events. This didn't
prove to be an issue for CMD or PowerShell (weirdly,) but it did prove
to be an issue for Redis. Unfortunately, Redis is exactly the sort of
thing you might want to run in a container.
Reintroducing these aliases was complicated because we took the
opportunity to remove all of IInputServices (!7105348), which was a
wrapper around some code that would choose Win32 or OneCore depending on
the runtime environment.
I made the choice (with the help of Leonard Hecker) to reimplement these
functions in a different way: always call the delay-loaded version, and
then on OneCore editions check the return value and error code to ssee
if we hit a delay load failure. It incurs a minor cost, but all of the
delay loads are in-proc and do not require us to make a syscall, so that
cost is negligible.
Part of this new implementation requires us to change _all conhost
internal callers_ to use "OneCoreSafe" versions of those APIs. We can't
redirect the user32 versions out of the way and usurp their import
symbols, so this commit also introduces some warning defines. If you use
VkKeyScanW (and friends), you _should_ get a linker error. Assuming
HostAndPropsheetIncludes has been included. It very well may not have
been included.
Fixes MSFT-40435912
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 949e8dfc07f122520c6a74412329a6f7e77d19c5
wyhash was chosen based on the results found in `smhasher`, were it proved
itself as an algorithm with little flaws and fairly high output quality.
While I have a personal preference for xxhash (XXH3 specifically), wyhash is a
better fit for this project as its source code is multiple magnitudes smaller,
simplifying the review and integration into the header-only `hash.h` file.
For use with hashmaps the hash quality doesn't actually matter much for
optimal performance and instead the binary size usually matters more.
But even in that scenario wyhash is fairly close to FNV1a (aka "FNV64").
The result is that this new hash algorithm will only have little impact on
hashmap performance if used over the standard FNV1a as used in the STL,
while simultaneously offering a vastly better hash quality.
This partially solves #13124.
## Validation Steps Performed
* Added test cases ✅
Other settings model classes call `JsonUtils::SetValueForKey` with the
private `_##value` member as the value. Since `_##value` is an optional,
this prevented writing out unset, optional fields. The new `Themes` class
deviated from this and this commit brings it back in line with the others.
Closes#13544
## Validation Steps Performed
* Create a `{ "name": "test" }` theme
* Save settings via the UI
* Optional/Defaulted fields aren't written ✅
## Summary of the Pull Request
VC++ v14 Descktop Framework package is required and not installed automatically when installing package manually.
## PR Checklist
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
While working on #13398 I felt that `TSFInputControl` wasn't up to sniff.
This commit is a minor cleanup of the class:
* default member initializers
* Simplified use of STL classes which already perform boundary checks
* Correctly check text buffer emptiness in `_SendAndClearText`
* Track selection range as mandated by the API
## Validation Steps Performed
* Japanese IME (Full-Width Katakana)
Typing "saitama" produces "サイタマ" ✅
* Korean IME
Typing "gksrmf" produces "한글" ✅
* Vietnamese IME
Typing "xin chaof" continues to produce broken "xin xinchaof"
(It's supposed to produce "xin chào")
* Emoji Picker (Win+.)
✅
## Summary of the Pull Request
- We only ever have 1 color picker now, instead of each tab having its own
- `TerminalPage` constructs this color picker (upon first request for it)
- `TerminalPage` attaches the color picker to the tab that requested for it
- `TerminalTab` detaches the color picker when it is done with it, so that `TerminalPage` can attach it to another tab later on
## References
#5907
## Validation Steps Performed
User-end behaviour is the same
We must use 65535 as `MAX_PARAMETER_VALUE` in order for us to properly parse
win32-input-mode sequences, which transmit UTF-16 characters as parameters.
Closes#12977
## Validation Steps Performed
* Call `SendInput` with 🙁 (`L'\xD83D'`, `L'\xDE41'`)
* 🙁 appears on the input line ✅
## Summary of the Pull Request
In #13560 we added a member to `Pane` that lets it know if it was spawned as a default terminal session, but did not propagate that value when the pane gets split or when the pane closes. This commit fixes that.
## Validation Steps Performed
A session spawned by a def term invocation remembers it even as it goes through splits
## Summary of the Pull Request
In general, when a selection marker is shown, we should scroll to it. The `selectAll` action adds a selection marker, but we don't scroll to it. This PR makes it such that we do do that.
Epic: #4993Closes#13485
Updates the schema such that the scroll mark settings are defined as profile settings instead of global settings (because they're actually profile settings).
Separately (but still relevant), I've also updated the release notes.
Closes#13583
This fixes an issue were overwriting parts of a row would only trigger
that specific portion of the row to be redrawn. This isn't just
problematic for combining characters, but also for things like
the new `TestDbcsBisectWriteCells` test introduced in #13626.
Benchmarks showed no impact on performance whatsoever.
## Validation Steps Performed
* Pick this commit into #13626
* Run the `TestDbcsBisectWriteCells` test and break before OpenConsole exits
* A correct "QいかなZYXWVUTに" output is visible ✅
This commit makes AtlasEngine recognize Powerline glyphs as box drawing ones.
The extra pixel offsets when determining the `scale` caused weird artifacts
and thus were removed. It seems like this causes no noticeable regressions.
Closes#13029
## Validation Steps Performed
* Run all values of `wchar_t` through `isInInversionList`
and ensure it produces the expected value ✅
* Powerline glyphs are correctly scaled with Cascadia Code PL ✅
07d58a8 contains a regression where the settings' `Themes()` property is
accessed without checking whether it's a `nullptr`. This can happen because
the invalid settings modal is shown with a empty settings model object.
This commit fixes the issue by deferring the update of `_settings` until
after we ensured that the `_settings` object is valid (besides warnings).
Closes#13543
## Validation Steps Performed
* Replace any string value with `123`
* Application doesn't crash ✅
## Summary of the Pull Request
- When 'discard changes' is hit, we re-initialize our list of color scheme view models but forgot to tell xaml about it, this commit fixes that.
- Make sure to exit rename mode when 'update settings' gets called
## References
color schemes mvvm added in #13179
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Hitting discard changes doesn't cause an inconsistency with the currently selected scheme anymore
## Summary of the Pull Request
Adds a new mode to `CloseOnExit`: `Automatic`. In this mode, if a process handed off by defterm terminates for whatever reason, we always close (i.e. we treat the mode as `Always`), but for processes launched by Terminal we terminate as with the `Graceful` behaviour.
## PR Checklist
* [x] Closes#13325
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
- Adds a new enum value to `CloseOnExit`
- Adds a new function to `Pane`: `FinalizeConfigurationGivenDefault`: this is a function that should be called when the pane is created via default terminal handoff, and can contain any special configurations we should set given that the pane was created via handoff
## Validation Steps Performed
Curiously, at least on Windows 10 (and rarely on Windows 11), if you minimize the Terminal by clicking on the taskbar, then alt-tab to try and restore the window, the Taskbar will decide to call `SwitchToWindow` on the invisible, owned ConPTY window instead of the main window. When that happens, ConPTY'll get a `WM_SIZE(SIZE_RESTORED, lParam=0)`. The main window will NOT get a `SwitchToWindow` called. If ConPTY doesn't actually inform the hosting process about this, then the main HWND might stay hidden.
* Refer to #13158 where we disabled this.
* Closes#13589
* Closes#13248
* Tested manually on a Windows 10 VM.
* Confirmed that opening tabs while maximized/snapped doesn't restore down.
* `[Native]::ShowWindow([Native]::GetConsoleWindow(), 6)` still works
## Summary of the Pull Request
Adds support for the `tab.showCloseButton` property to themes. This accepts three values:
* `"always"` (default): The close button acts like it does today.
* `"hover"`: The close button is always visible on the active tab. On inactive tabs, the close button only appears on mouse over.
* `"never"`: The close button is never visible. You can't close the tab with middle-click, but you can still use keyboard shortcuts to close the tab.
## References
* See #3327
* ⚠️ targets #13178⚠️
## PR Checklist
* [x] Closes#3335
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated - YUP
## Detailed Description of the Pull Request / Additional comments
See the following two properties in WInUI that we're leveraging here.
* [`TabViewCloseButtonOverlayMode.OnPointerOver`](https://docs.microsoft.com/en-us/windows/winui/api/microsoft.ui.xaml.controls.tabviewclosebuttonoverlaymode?view=winui-2.7&viewFallbackFrom=winui-2.2)
* [`TabViewItem.IsClosable`](https://docs.microsoft.com/en-us/windows/winui/api/microsoft.ui.xaml.controls.tabviewitem.isclosable?view=winui-2.2#microsoft-ui-xaml-controls-tabviewitem-isclosable)
One is a tabview-level property, the other is a per-tab-item property, hence why this code is a little wacky.
## Validation Steps Performed
gifs below
This commit contains 3 improvements for glyph rendering:
* Scale block element and box drawing characters to fit the cell size
"perfectly" without leaving pixel gaps between cells.
* Use `IDWriteTextLayout::GetOverhangMetrics` to determine whether glyphs
are outside the given layout box and if they are, offset their position
to fit them back in. If that still fails to fit, we downscale them.
* Always scale up glyphs that are more than 2 cells wide
This ensures that long ligatures that mimic box drawing characters like
"===" under Cascadia Code are upscaled just like regular box drawings.
Unfortunately this results in ligature-heavy text (like Myanmar) to get an
"uneven" appearance because some ligatures can suddenly appear too large.
It's difficult to come up with a good heuristic here.
Closes#12512
## Validation Steps Performed
* Print UTF-8-demo.txt
* Block characters don't leave gaps ✅
* Print a lorem-ipsum in Myanmar
* Glyphs aren't cut off anymore ✅
* Print a long "===" ligature under Cascadia Code
* The ligature is as wide as the number of cells used ✅
## Summary of the Pull Request
Implements the MVVM style for the Color Schemes editor
## PR Checklist
* [x] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
Introduces:
- `ColorSchemesPageViewModel`: The view model responsible for the entire color schemes page. Handles what the current scheme is, adding/deleting/renaming schemes
- `ColorSchemeViewModel`: A view model class for individual color schemes
## Validation Steps Performed
Manually tested:
- Edit a color scheme
- Add new color scheme
- Rename a color scheme
- Delete a color scheme
This is an experiment, as discussed in https://github.com/microsoft/terminal/issues/11790#issuecomment-1179143049. We don't know what for sure causes these crashes, but it seems that blindly throwing, so that it gets picked up by Watson, is probably not the move. Instead, we're just gonna do our fallback, REGARDLESS of what the exception was.
See #11790, MSFT:38542548, MSFT:38572983, MSFT:38542574 et. al.
Refer to https://docs.microsoft.com/en-us/windows/win32/rstmgr/guidelines-for-applications
The OS will send us a WM_QUERYENDSESSION when it's preparing an
update for our app. It will then send us a WM_ENDSESSION, which gives
us a small timeout (~30s) to actually shut down gracefully. After
that timeout, it will send us a WM_CLOSE. If we still don't close
after the WM_CLOSE, it'll force-kill us (causing a crash which will be
bucketed to moapphang).
We will manually start a quit, so that we can persist the state. If we refuse to
gracefully shut down, the OS will crash us to focefully terminate us. We
choose to quit here, rather than just close, to skip over any warning dialogs
(e.g. "Are you sure you want to close all tabs?") which might prevent a WM_CLOSE
from cleanly closing the window.
This will cause a appHost._RequestQuitAll, which will notify the
monarch to collect up all the window state and save it.
This "crash" caused by the OS force killing us constitutes 80% of all our crashes. 80%. See MSFT:38947155, MSFT:38877540, MSFT:21058878, MSFT:31710054, MSFT:39764652, MSFT:26883776.
Closes#13569
It also fixes the issue where if you've got Terminal Dev running (outside VS), and you try to Deploy, you have to make sure to close the "Are you sure you want to close all tabs" dialog before the deployment can proceed. A deploy in VS sends the same sequence of messages as a real update.
This commit implements the remaining 5 of 8 grid lines:
left/top/right/bottom (COMMON_LVB) borders and double underline
`AtlasEngine::_resolveFontMetrics` was partially refactored to use `float`s
instead of `double`s, because that's what the remaining code uses as well.
It also helps the new, slightly more complex double underline calculation.
## Validation Steps Performed
* Print characters with the `COMMON_LVB_GRID_HORIZONTAL`, `GRID_LVERTICAL`,
`GRID_RVERTICAL` and `UNDERSCORE` attributes via `WriteConsoleOutputW`
* All 4 grid lines are visible ✅
* Grid lines correctly scale according to the `lineWidth` ✅
* Print a double underline with `printf "\033[21mtest\033[0m"`
* A double underline is fully visible ✅
Cleans up a couple local test failures.
* [x] Closes#13474: So, I clearly hadn't ran the local tests at the end of the themes PR. We needed a sensible fallback to SOME theme, even if there wasn't one provided in the user json. This is only really hit in the tests (that don't also include `defaults.json`.
* [x] Closes#13323: Meh, the ordering of the keys in this test doesn't matter. Ordering is a map implementation detail. This is fine.
* [x] Ran tests locally
We recently figured that we can drop support for Windows 7. Coincidentally
AtlasEngine never actually supported Windows 7 properly, because it called
`ResizeBuffers` with `DXGI_SWAP_CHAIN_FLAG_FRAME_LATENCY_WAITABLE_OBJECT`
no matter whether the swap chain was created with it enabled.
The new minimally supported version is Windows 8.1.
66f4f9d had another bug: Just like how we scroll our viewport by `memmove`ing
the `_r.cells` array, we also have to `memmove` the new `_r.cellGlyphMapping`.
Without this fix drawing lots of glyphs while only scrolling slightly
(= not invalidating the entire viewport), would erroneously call
`makeNewest` on glyphs now outside of the viewport. This would cause
actually visible glyphs to be recycled and overwritten by new ones.
## Validation Steps Performed
* Switch to Cascadia Code
* Print some text that fills the glyph atlas
* Scroll down by a few rows
* Write a long "==========" ligature (this quickly fills up
any remaining space in the atlas and exacerbates the issue)
* Unrelated rows don't get corrupted ✅
While working on another PR related to this I noticed that my VS
generates `.vcxproj` files that are a bit different to the ones we have.
This commit is a quick search & replace of all our project files to make
(primarily) their `ToolsVersion` more in line with what VS does itself:
No `ToolsVersion` for `.vcxproj`, `ToolsVersion="15.0"`
for `.csproj` and `ToolsVersion="4.0"` for `.filters` files.
## Summary of the Pull Request
The xaml file no longer directly accesses the settings model object, and the settings model object is no longer exposed on the view model
## References
#13377
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Still works
I was messing around with trying to build & deploy from the commandline. I discovered this, which is progress. However, the inner-loop commandline build for the Terminal is still egregiously long.
* just a docs update
* is EIM work
This change adds support for the `IntenseIsBold` rendering setting.
Windows Terminal for instance defaults to `false` here, causing
intense colors to only be bright but not bold.
## Validation Steps Performed
* Set "Intense text style" to "Bright colors"
* Enable AtlasEngine
* Print ``echo "`e[1mtest`e[0m"``
* "test" appears as bright without being bold ✅
## Summary of the Pull Request
This is a spec specifically dedicated to Mark Mode. It's an addition to the Keyboard Selection spec. I felt that it makes the most sense to make this a separate PR because there's a lot of ideas that are very specific to Mark Mode, and this gives us the space to modify some of that behavior and get a good look at how other terminal emulators designed this feature.
## References
#2840 - Keyboard Selection Spec (base spec/branch/PR)
## PR Checklist
* [X] Contributes to #715
#8000 will change the way we store text from a strict grid/matrix where
one UTF16 character or surrogate pair always equals 1 column with the
possibility of joining exactly 2 to a wide character pair, to a dynamic
buffer where 1 or more characters can form 1 or more columns in any
arbitrary combination. Our long term goal is to properly support both
complex grapheme clusters like Emojis and complex ligatures that a wider
than 2 columns. This change requires us to break our API as
`ReadConsoleOutputA/W` assumes the existence of exactly this grid/matrix
storage. Since we store wide characters like "い" as a single codepoint
that is simply marked as being 2 columns wide in the future, we cannot
reconstruct trailing DBCS characters that were written to the buffer
like we used to. On the other hand this new behavior allows us to
implement better Unicode support and most likely significantly improve
our performance.
### Minor breaking changes
* `ReadConsoleOutputA` will now always **zero** the high byte in
`(CHAR_INFO).Char.UnicodeChar`. Only the `.AsciiChar` can be used
then. This prevents users from storing "additional" data in the
terminal buffer.
* `ReadConsoleOutputA` will now **zero** the `.AsciiChar` if it fails to
convert the Unicode character into an appropriate DBCS.
* Example: It's possible to write "い" into a narrow column despite
being a wide character. In these cases `WriteConsoleOutputA` will
now return `0x00` instead of `0x44` (the lower half of い's code
point `0x3044`).
### Major breaking changes
* `ReadConsoleOutputW` will now repeat the leading Unicode character
twice and ignore the trailing one.
* Example 1: Writing the pair `0x3044 0xabcd` with
`WriteConsoleOutputW` used to yield the same `0x3044 0xabcd` if read
back with `ReadConsoleOutputW`. This worked because conhost
effectively ignored the trailing codepoint, allowing one to
"smuggle" data. In the future this trailing character will be
discarded and produce `0x3044 0x3044` instead.
* Example 2: Writing い with `WriteConsoleOutputA` can be done with
code page 932 (Shift-JIS) and the DBCS `0x82 0xa2`. If read back
with `ReadConsoleOutputW` this would previously yield the two
Unicode characters `0x3044 0xffff`. After this commit it'll yield
`0x3044 0x3044`.
### Alternative approaches
It's possible to "tag"/"mark" written data as originating from
`WriteConsoleOutputA/W` so that it can be reconstructed accurately later
on. However this lead to implementation complexities that we're actively
trying to avoid in the new buffer implementation. Effectively
_everything_ that touches the buffer's text would have to handle these
marks and either write or clear them. Given the most likely small amount
of users who depend on the current quirky behavior, it'd be an
unwarranted maintenance and performance burden and prevent Windows
Terminal to ever truly migrate to full Unicode support.
## Validation Steps Performed
* Adjusted feature tests complete successfully ✅
On occasion, when we submit to the store we get a package rejection
because the app name has changed for the `qps-*` locales. Instead of
constantly reserving new pseudolocalized app names every time the
pseudolocalization seed changes, we should just lock our app name so
that it does not get pseudolocalized.
Upgrade check-spelling to [v0.0.20](https://github.com/check-spelling/check-spelling/releases/tag/v0.0.20)
This upgrade includes a refresh of the workflow
key new features:
* the previous comment is collapsed
* duplicate words are flagged (see `alone` and `the`)
* forbidding patterns (see `nonexistent`, `preexisting`, and `greater than`)
Each of these features can be tuned
- comment collapsing is controlled by the `followup` bits in the workflow-- but I can't imagine why one would want to turn it off
- duplicate words can be masked in `patterns.txt` (see `Guid` and `that`)
- forbidding patterns (especially duplicates) is in `.github/actions/spelling/line_forbidden.patterns`
Fwiw, I'm slowly moving towards not using `.txt` in filenames, but it's a long term project and I have a bunch of other goals for the near term.
The refresh of advice is of course flexible -- I'm still evolving my default text. Note that the default now includes some `curl` and I'm still working on how I want to consume the output. I'm getting close to the point where I might be able to provide a tool that could reliably consume the output (including on Windows).
This code has been used internally for a while, but I tested it for this repository here:
https://github.com/check-spelling/terminal/pull/2
## Summary of the Pull Request
`AdjustIndistinguishableColors` can now be set to:
- `Never`: Never adjust the colors
- `Indexed`: Only adjust colors that are part of the color scheme
- `Always`: Always adjust the colors
## References
#13343
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
For legacy purposes, `true` and `false` map to `Indexed` and `Never` respectively
## Validation Steps Performed
Setting still works
The behaviour of the 'go back' button in the command palette was changed to return to the previously selected element rather than the root.
Instead of returning to the root, the go back button now returns to the previously selected item in the filtered action list. The previously selected item is selected by default and the view is scoped to the item.
## Validation Steps Performed
Manually tested by going back and forth between nested actions in the command palette.
Closes#13457
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Added two new buttons to the About dialog. Source Code and Send Feedback buttons link directly to the Terminal project on GitHub and to the Issues page respectively.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#13371
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#13371
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #13371
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Performed manual testing and confirmed that the implementation works.
The current TextBuffer implementation will happily overwrite the
leading/trailing half of a wide glyph with a narrow one without
padding the other half with whitespace. This could crash AtlasEngine
which aggressively guarded against such inconsistencies.
Closes#13522
## Validation Steps Performed
* Run .bat file linked in #13522
(Override wide glyph with a single space.)
* `AtlasEngine` doesn't crash ✅
### Disappearing glyphs
We only process glyphs within the dirtyRect, but glyphs outside of the dirtyRect
are still in use and shouldn't be discarded. This is critical if someone uses
a tool like tmux to split the terminal horizontally. If they then print a lot
of Unicode text on just one side, we have to ensure that the (for example)
plain ASCII glyphs on the other half of the viewport are still retained.
### Black viewport after font changes
The cursor was drawn without a clip rect, causing the entire atlas
texture to be filled with black. This just so happened to work fine
in Windows Terminal but relied on a race condition.
Closes#13490
## Validation Steps Performed
* Disappearing glyphs
* Start `tmux` in `wsl`
* Split horizontally with `Ctrl+B`, `"`
* `cat` a huge Unicode text file on the bottom
* Ensure ASCII glyphs in the top half don't disappear ✅
* Black viewport after font changes
* Start `OpenConsole` with `AtlasEngine`
* Open Properties dialog and click "Ok"
* Viewport content doesn't disappear ✅
2b202ce6 changed this code to fix 2-phase name lookup, but accidentally
changed `&m_tInit` to `&CFuzzType::m_tInit` (pointer-to-member¹)
instead of `&this->m_tInit` (a regular pointer to some value).
This should not be confused with `&(CFuzzType::m_tInit)`
of course which is _not_ a pointer-to-member.
¹ To simplify things, a pointer-to-member is basically the byte offset of a
member within a struct. For instance given `struct T { char a, b, c, d; }` then
`&T::c` would commonly "store" the value 2, equivalent to `offsetof(T, c)`.
Closes#13501
## Summary of the Pull Request
Re-enable the setting to adjust indistinguishable text, with some changes:
- We now pre-calculate the nudged values for 'default bright foreground' as well
- When a color table entry is manually set (i.e. via VT sequences) we re-calculate the nudged values
## References
#11095#12160
## PR Checklist
* [x] Closes#11917
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
## Validation Steps Performed
Indistinguishable text gets adjusted again
The min/max/close buttons now use the same font glyphs used in Windows instead of paths.
They will also look different depending on whether you use Windows 10 or 11.
With certain scaling levels, the new fluent icons are always blurry on titlebars (win32, UWP, terminal).
I didn't check, but I assume that the glyphs will not be blurry on Windows 10 because they use the old font.
However, the glyps seem to have some alignment issues, making them even more blurry, and I'm not sure if I can fix that.
I looked into the minimize button problem:
* The UWP titlebar has 4px/5px, just like Terminal, but win32 titlebars have 5px/4px
* The new fluent icons have rounded caps, but the win32 minimize one doesn't (it's very subtle)
* The win32 minimize button is not blurry when the other buttons are
From this I presume that the minimize button is still using the old icon. So perhaps the Terminal/UWP vertical alignment is correct.
I was able to improve the rendering by wrapping the icon inside a Viewbox.
However, it won't perfectly match UWP, because scaling is calculated differently.
The icon width is 10px, which on 1.25x scaling would become 12.5px.
UWP titlebars truncate that to 12px, while Xaml renders that as 13px.
This is probably the best that can be done for now.
I found these icons [here](https://docs.microsoft.com/en-us/windows/apps/design/style/segoe-fluent-icons-font).
## Summary of the Pull Request
This PR adds support for downloadable soft fonts in the DirectX
renderer, potentially enabling them to be used in Windows Terminal.
## References
Soft fonts were first implemented in conhost (with the GDI renderer) in
PR #10011.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not
checked, I'm ready to accept this work might be rejected in favor of a
different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
The way the DirectX implementation works is by building up a bitmap
containing all of the glyphs, and then drawing an appropriate subsection
of that bitmap for each character that needs to be rendered. The current
text color is applied with a color matrix effect, and the glyphs are
automatically scaled up to the current font size with a scaling effect.
By default the scaling uses a high quality cubic interpolation, which
gives it a smoother antialiased effect. But if the *Text antialiasing*
option is configured as *Aliased*, we use a simpler nearest-neighbor
interpolation, which more closely matches the rendering of the original
GDI implementation.
## Validation Steps Performed
I've manually tested the renderer in conhost with the `UseDx` registry
entry. I've also tested in Windows Terminal using the experimental
passthrough mode.
## Summary of the Pull Request
The original `DECPS` implementation made use of the Windows MIDI APIs to
generate the sound, but that required a 3MB package dependency for the
GS wavetable DLS. This PR reimplements the `MidiAudio` class using
`DirectSound`, so we can avoid that dependency.
## References
The original `DECPS` implementation was added in PR #13208, but was
hidden behind a velocity flag in #13258.
## PR Checklist
* [x] Closes#13252
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #13252
## Detailed Description of the Pull Request / Additional comments
The way it works is by creating a sound buffer with a single triangle
wave that is played in a loop. We generate different notes simply by
adjusting the frequency at which that buffer is played.
When we need a note to end, we just set the volume to its minimum value
rather than stopping the buffer. If we don't do that, the repeated
starting and stopping tends to produce a lot of static in the output. We
also use two buffers, which we alternate between notes, as another way
to reduce that static.
One other thing worth mentioning is the handling of the buffer position.
At the end of each note we save the current position, and then use an
offset from that position when starting the following note. This helps
produce a clearer separation between tones when repeating sequences of
the same note.
In an ideal world, we should really have something like an attack-decay-
sustain-release envelope for each note, but the above hack seems to work
reasonably well, and keeps the implementation simple.
## Validation Steps Performed
I've manually tested both conhost and Terminal with the sample tunes
listed in issue #8687, as well as a couple of games that I have which
make use of `DECPS` sound effects.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Added setting for for hide window when it loses focus.
Works on normal window and quake window.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10660
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
- Enable **Settings > Appearance > Automatically hide window**
- Terminal window should be minimized on taskbar when it loses focus
- Quake window should be minimized on system tray when it loses focus
- Enable also **Settings > Appearance > Hide Terminal in the notification area when it is minimized**
- Terminal window should be minimized on system tray when it loses focus
- Quake window should be minimized on system tray when it loses focus
⚠️ This spec is going into the `specs/drafts/` folder, because it's CLEARLY not done yet.
I discussed this a bit with Dustin. We felt it would be valuable to have these thoughts committed as a durable artifact. Better to have our Mica thoughts written down somewhere, with the context they belong in. That of course includes the bigger Theming spec, which never got finished.
I don't think we need to go through the fill spec review for this. Theming is clearly still a WIP. But committing this draft should give a better picture of what the vision is.
See also:
* #3327
* #10509
### TODOs
* [ ] The many that are straight up in the doc
* [ ] The fact that there's multiple Mica's now
* [ ] GO look at MSFT:39027976
Moving to VS 2022 and C++20 in #13368 introduced a new dependency on an
as-yet-nonexistent VC Runtime library: msvcp140_atomic_wait.dll. That
library is not installed on the 21H1 machines that run our PGO tests.
Fortunately, the app platform will--largely--handle this dependency for
us on machines in the wild.
Fixes#13500
The debugging tools folks helpfully published PdbStr and SrcTool as
NuGet packages for us to take a dependency on! Now we can end this
wasteful practice once and for all...
NOTE: This change introduces a harmless error message at the end of
symbol indexing. Instead of printing out the list of mapped sources,
`srctool` will complain that `srcsrv.dll` is missing. This is only cosmetic.
Yep this is my bad. I was trying to fix a bug where only having one of `background` or `unfocusedBackground` would cause the other to never get set to the default. In attempting to force all the logic into an if statement, I messed up the order of operations. My bad 😢
Regressed in #13456
## Summary of the Pull Request
Adds support to navigate to clickable hyperlinks using only the keyboard. When in mark mode, the user can press [shift+]tab to go the previous/next hyperlink in the text buffer. Once a hyperlink is selected, the user can press <kbd>Ctrl+Enter</kbd> to open the hyperlink.
## References
#4993
## PR Checklist
* [x] Closes#6649
* [x] Documentation updated at https://github.com/MicrosoftDocs/terminal/pull/558
## Detailed Description of the Pull Request / Additional comments
- Main change
- The `OpenHyperlink` event needs to be piped down to `ControlCore` now so that we can open a hyperlink at that layer.
- `SelectHyperlink(dir)` searches the buffer in a given direction and finds the first hyperlink, then selects it.
- "finding the hyperlink" is the tough part because the pattern tree takes in buffer coordinates, searches through the buffer in that given space, then stores everything relative to the defined space. Normally, the given buffer coordinates would align with the viewport's start and end. However, we're now trying to search outside of the viewport (sometimes), so we need to manage two coordinate systems at the same time.
- `convertToSearchArea()` lambda was used to convert a given coordinate into the search area coordinate system. So if the search area is the visible viewport, we spit out a viewport position. If the search area is the _next_ viewport, we spit out a position relative to that.
- `extractResultFromList()` lambda takes the list of patterns from the pattern tree and spits out the hyperlink we want. If we're searching forwards, we get the next one. Otherwise, we get the previous one. We explicitly ignore the one we're already on. If we don't find any, we return `nullopt`.
- Now that we have all these cool tools, we use them to progressively search through the buffer to find the next/previous hyperlink. Start by searching the visible viewport _after_ (or _before_) the current selection. If we can't find anything, go to the next "page" (viewport scrolled up/down). Repeat this process until something comes up.
- If we can't find anything, nothing happens. We don't wrap around.
- Other relevant changes
- the `copy` action is no longer bound to `Enter`. Instead, we manually handle it in `ControlCore.cpp`. This also lets us handle <kbd>Shift+Enter</kbd> appropriately without having to take another key binding.
- `_ScrollToPoint` was added. It's a simple function that just scrolls the viewport such that the provided buffer position is in view. This was used to de-duplicate code.
- `_ScrollToPoint` was added into the `ToggleMarkMode()` function. Turns out, we don't scroll to the new selection when we enter mark mode (whoops!). We _should_ do that and we should backport this part of the change too. I'll handle that.
- add some clarity when some functions are using the viewport position vs the buffer position. This is important because the pattern interval tree works in the viewport space.
## Validation Steps Performed
- case: all hyperlinks are in the view
- ✅ get next link
- ✅ get prev link
- ✅ case: need to scroll down for next link
- ✅ case: need to scroll up for next link
Does what it says on the tin. When we get focused, temporarily turn off readonly mode, as to not pop the dialog when the focus sequence is eventually sent to the connection.
* closes#13461
The main fix here is for the caption button colors. If you had a dark OS/app theme, and a light titlebar, we'd end up with light glyphs, so the caption buttons would be impossible to find.
There's also a pile of nits from #12992 in here. Probably enough to close#13456 out, but I'll let Dustin be the judge.
Filing today, to get in for 1.16 selfhost (@DHowett)
`TestDbcsWriteRead` failed to properly test all text input scenarios.
In order to write wide characters with `CHAR_INFO` structs using the `W` APIs
one must still repeat the `CHAR_INFO` twice, once with `COMMON_LVB_LEADING_BYTE`
and once with `COMMON_LVB_TRAILING_BYTE` set in the attributes. This is because
`CHAR_INFO` APIs are column oriented. `TestDbcsWriteRead` on the other hand
only tested the scenario of sending wide characters without those flags.
This commit fixes the problem by introducing a `UnicodeDoubled` mode and
increases the number of test patterns from 14 to 17. Due to the existing
code having been written with the false assumption in mind, a simpler
modification resulted in +1100 LOC. As such I opted to rewrite the code instead
and replaced the potentially buggy output generators with static arrays.
Code page 437 tests were removed, as it contains no DBCS characters anyways.
This is preliminary work for #8000.
## Summary of the Pull Request
When the debug tap converts control characters into visible glyphs, it
ends up losing the structure of the output, and that can sometimes make
things difficult to read. This PR attempts to alleviate that problem by
reinjecting an actual line break in the debug stream whenever an `LF`
control is received.
## PR Checklist
* [x] Closes#12312
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12312
## Validation Steps Performed
I've tested the updated debug tab with a number of different shells, and
also a couple of different apps. When there aren't many linefeeds in the
output, it's obviously not going to make much of a difference, but when
there are, I think it definitely improves the readability.
If launch mode is set to full screen quake window is opened in full
screen.
## Validation Steps Performed
- Set startup > launch mode > full screen
- Launch quake window
- Quake window shouldn't be opened in full screen
Closes#12894
#13458 added the ability to reuse tiles from our glyph atlas texture
so that we stop running out of GPU memory for complex Unicode.
This however can result in our glyph generation being a performance issue in
edge cases, to the point that the application may feel outright unuseable.
CJK glyphs for instance can easily exceed the maximum atlas texture size
(twice the window size), but take a significant amount of CPU and GPU time to
rasterize and draw, which results in "jelly scrolling" down to ~1 FPS.
This PR improves the situation of the latter half by directly drawing
glyphs into the texture atlas without an intermediate scratchpad texture.
This reduces GPU usage by 96% on my system (33% -> 2%) which improves general
render performance by ~100% (15 -> 30 FPS). CPU usage remains the same however,
but that's not really something we can do anything about at this time.
The atlas texture is already our primary means to reduce the CPU cost after all.
## Validation Steps Performed
* Disable V-Sync for OpenConsole in NVIDIA Control Panel
* Enable `debugGlyphGenerationPerformance`
* Print the entire CJK block U+4E00..U+9FFF
* Measure the above GPU usage and FPS improvements ✅
(Alternatively: Just scroll around and judge the "jellyness".)
## Summary of the Pull Request
When you create a console alias that overrides an existing command, it
should still be possible to execute the original command by prefixing it
with a space. However, at some point in the past, there was an attempt
to improve the usability by trimming leading spaces, and that ended up
breaking this functionality. This PR reverts that change, so leading
spaces can once again be used to bypass an alias.
## PR Checklist
* [x] Closes#4189
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #4189
## Validation Steps Performed
I've updated the existing alias unit test for leading spaces to match
the new behavior, i.e. it now confirms that a command with leading
spaces will not match the alias.
I've also manually confirmed that the `doskey` test case reported in
issue #4189 is now working as expected.
So far AtlasEngine would only grow the backing texture atlas once it gets full,
without the ability to reuse tiles once it gets full. This commit adds LRU
capabilities to the glyph-to-tile hashmap, allowing us to reuse the least
recently used tiles for new ones once the atlas texture is full.
This commit uses a quadratic growth factor with power-of-2 textures,
resulting in a backing atlas of 1x to 2x the size of the window.
While AtlasEngine is still incapable of shrinking the texture, it'll now at
least not grow to 128MB or result in weird glitches under most circumstances.
## Validation Steps Performed
* Print `utf8_sequence_0-0x2ffff_assigned_printable_unseparated.txt`
from https://github.com/bits/UTF-8-Unicode-Test-Documents
* Scroll back up to the top
* PowerShell input line is still there rendering as ASCII. ✅
## Summary of the Pull Request
Implements a `RenderingViewModel` for the Rendering page in the SUI
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Rendering page still works
## Summary of the Pull Request
Implements an `InteractionViewModel` for the Interaction page in the SUI
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Interaction page still works
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds ability to select where new tab will appear: at the end or after currently selected tab.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#12955
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
PR adds setting "NewTabPosition" in global appearances with dropdown list and uses it then creating new tabs. This setting does not affect settings tab position (should it?).
There should also be a documentation update, I'm just waiting to see if this change even acceptable.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
Implements a `GlobalAppearanceViewModel` for the GlobalAppearance page in the SUI
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Global appearance page still works
## Summary of the Pull Request
Implements a `LaunchViewModel` for the Launch page in the SUI
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Launch page still works
Adds `tabRow.unfocusedBackground` to the theme properties.
When provided, the window will use this ThemeColor as the color of the tab row when the window is inactive.
When omitted, the window will fall back to the default tab row color, `{"key": "TabViewBackground"}` from our App.xaml.
* [ ] tests added.
* [x] Closes#4862
* [ ] Needs a whole pile of docs updates, which we'll do at the end here.
This actually helped validate #12992 quite a bit. I found a bunch of bugs concerning null colors, null objects. Json parsing is hard 😛
This one's pretty obvious. I added another scrollbar sized grid to the terminal,
but I forgot to collapse it when the user requests `"scrollbarState": "hidden"`.
* [x] Closes#13446
* [x] I work here
## Summary of the Pull Request
Adds support for the `tab.background` property to themes. This is also a ThemeColor, so it accepts, colors, `accent`, and `terminalBackground`, just like everything else.
## References
* See #3327
* ⚠️ targets #12992⚠️
## PR Checklist
* [x] Closes#702
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated - YUP
## Detailed Description of the Pull Request / Additional comments
I apparently left behing an optional color in TerminalTab for theme colors some time ago, just never used it. Crazy, huh?
## Validation Steps Performed
gifs below
##### ⚠️ targeting 1.15
## Summary of the Pull Request
Adds support for Themes, a new type of customization for the Terminal. Themes allow the user to customize elements of the Terminal window itself. In this first iteration, this PR adds support for two main properties:
* enabling Mica as the window backdrop
* changing the tab row color (read: changing the titelbar color)
These represent the most important asks of theming in the Terminal. The properties added in this PR are:
* Theme color variants:
- `"#rrggbb"` or `"#aarrggbb"`
- `"accent"`
- `"terminalBackground"`
* Properties (_listed here in dot notation, but implemented as sub-objects_)
- `tabRow.background`: accepts a ThemeColor (above)
- `window.applicationTheme`: accepts one of `{"system", "light", "dark"}`
- `window.useMica`: accepts a boolean, defaults to false.
## References
* As first described in #3327
* spec'd in #12530
## PR Checklist
* [x] Sorta enables #10509, but doesn't close it. That'll need more comprehensive changes to the titlebar code.
* **update**: I totally disabled mica, but left the serialization code. It just seems silly without #10509.
* [x] Closes#1963
* [x] Closes#3774
* [x] Closes#12939
* [x] Does the bulk of the #3327 work, but I'm going to leave that open since that's become my megathread for everything related to theming.
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - **SURE DOES**
## Detailed Description of the Pull Request / Additional comments
### --> GO READ #12530 <--
Seriously.
These themes aren't customizable in the SUI currently. You can change the active theme, and the UI will show all of the defined themes, but they're not editable there.
They don't layer. You'll need to define your own themes.
Thay can't come from fragments. This is a really cool future idea, but not implemented in this v0.
The sub objects have some gnarly macros to generate a lot of the serialization code for you.
### TODOs
* [x] I still have yet to establish what the accent color algorithm is. This might be proprietary and require a ThemeHelpers workaround.
* [x] Make sure `terminalBackground` & the SUI result in something sensible
* [x] Make sure runtime BG changes work with `terminalBackground`. One time, they didn't. `printf "\x1b]11;rgb:ff/00/ff\x07"`
* [x] Acrylic Terminal BG's look weird, like, the opacity is always 50% or something. And the tab row looks all wrong then.
## Validation Steps Performed
This is the blob I've been testing with:
<details>
```jsonc
// "useAcrylicInTabRow": true,
"theme": "my dark",
// "theme": "Edge",
"theme": "orangey",
"theme": "WHITE",
// "theme": "terminal",
"themes": [
{
"name": "my dark",
"window": {
"applicationTheme": "dark",
"useMica": true,
},
"tabRow": {
"background": "#00000000",
},
},
{
"name": "Edge",
"tabRow": { "background": "accent" },
"window": { "applicationTheme": "system" }
},
{
"name": "orangey",
"window": {
"applicationTheme": "light",
"useMica": true,
},
"tabRow": {
"background": "#ff8800",
},
},
{
"name": "WHITE",
"window": {
"applicationTheme": "dark",
"useMica": true,
},
"tabRow": {
"background": "#FFFFFF",
},
},
{
"name": "terminal",
"window": {
"applicationTheme": "dark",
"useMica": false,
},
"tabRow": {
"background": "terminalBackground",
},
},
]
```
</details>
```
% .\tools\ReleaseEngineering\ServicingPipeline.ps1
Inferred servicing version 1.14
PICK f025c53dba: Remove the fallback to wsl.exe when HKCU\...\Lxss doesn't exist (#13436)
OK
```
The hover tab color used to be generated from the selected tab color, which would end up lighter or darker, and white-gray colors would end up pink.
It is now simply the selected tab color with 60% opacity. This is also how brushes are created for accent buttons and color buttons (although with different opacity levels).
The main result of this fallback is that we attempt to launch wsl.exe
when the user hasn't installed or interacted with WSL. On our test
machines, that results in the creation of a wsl.exe process that tells
us precisely nothing; on WDAC managed machines it results in an Event
Log entry about spawning another (possibly blocked) process.
The registry is more reliable, and if the "API" it provides changes we
can just rev terminal.
Closes#11716
## Summary of the Pull Request
In #13370, we should be notifying the renderer that the selection changed. Minor oversight and simple fix.
## References
#4993#13370Closes#13413
This commit fixes a minor race condition covered as part of #13368.
The member `_pfnHandoff` was read without the mutex `_mtx` being locked first.
The issue was solved by acquiring the lock early and running the entire
`s_StopListening` function with that lock held.
## Summary of the Pull Request
Introduces the `switchSelectionEndpoint` action which switches whichever selection endpoint is targeted when a selection is present. For example, if you are targeting "start", `switchSelectionEndpoint` makes it so that now you are targeting "end". This also updates the selection markers appropriately.
## References
Spec - #5804#13358Closes#3663
## Detailed Description of the Pull Request / Additional comments
Most of the code is just standard code of adding a new action. Other than that, we have...
- if there is no selection, the action fails and the keybinding is passed through (similar to `copy()`)
- when we update the selection endpoint, we need to also update the "pivot". This ensures that future calls of `UpdateSelection()` respect this swap.
- [Corner Case] if the cursor is being moved, we make it so that you basically "anchored" an endpoint and you don't have to hold shift anymore.
## Why is this change being made?
Our conhost OneCore backend isn't as thoroughly tested as our Win32 one and fell victim to the general "bugginess" of our shutdown handling centered around `ServiceLocator::RundownAndExit`. In the past we simply leaked all resources, but changed it so that a cleanup on exit occurs, so that we can track resource leaks for instance. This broke OneCore which has a more delicate shutdown than Win32.
## What changed?
This commit reverts changes being made in 9d7a46f64c and after.
## How was the change tested?
This change was tested in a OneCore VM by repeatedly spawning subprocesses and ensuring they exit in a timely manner and without unexpected crashes.
Related work items: MSFT-40226902, MSFT-22128499
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 0683758a0846aefbbe50730c3cd336623328ddeb
## Summary of the Pull Request
1. [copy on select] when manually copying text (i.e. kbd or right-click) while in mark/quick-edit mode, we now dismiss the selection.
2. `Enter` is now bound to copy by default.
- This works very well with mark mode and provides a more consistent behavior with conhost's selection experience overall.
- "why not hardcode `Enter` as a way to copy when in mark mode?"
- In an effort to make this as configurable as possible, I decided to make it a configurable keybinding, but am open to suggestions.
3. selection markers
a. we now hide the selection markers when multi-clicking the terminal.
b. selection markers are now properly shown when a single cell selection exists
- Prior to this PR, any single cell selection would display both markers. Now, we actually track which endpoint we're moving and display the appropriate one.
4. ensures that when you use keyboard selection to move past the top/bottom of the scroll area, we clamp it to the origin/bottom-right respectively. The fix is also better here in that it provides consistent behavior across all of the `_MoveByX` functions.
5. adds `toggleBlockSelection` to the schema
## References
#13053
## Validation Steps Performed
Did a whole flowchart of expected behavior with copy on select:
- enable `copyOnSelect`
- make a selection with the mouse
- ✅ right-click should copy the text --> clear the selection --> paste
- use keyboard selection to quick-edit the existing selection
- ✅ `copy` action should clear the selection
- ✅ right-click should copy the text --> clear the selection --> paste
Played with selection markers a bit in mark mode and quick edit mode. Markers are updating appropriately.
FabricBot is now a [config-as-code-only] platform. As a result, while
you can still use the [FabricBot Configuration Portal] to modify your
FabricBot configuration, you can no longer save the changes. The only
way to save changes to your configuration at the moment is to _export
configuration_ from the portal and upload the exported configuration to
`.github/fabricbot.json` in your repository. In this pull request, we
are adding your FabricBot configuration to your repository at
`.github/fabricbot.json` so that you can make changes to it going
forward.
While the [FabricBot Configuration Portal] is the *only way* to modify
your FabricBot configuration at the moment, we have a feature on our
backlog to publish the JSON schema defining the structure of the
FabricBot configuration file. With the JSON schema, you can (1) use a
plaintext editor of your choice to modify the FabricBot configuration
file and use the schema to validate the file after editing or (2)
[configure VS Code] to use the schema when editing FabricBot
configuration file to take advantage of convenience features such as
automatic code completion and field description on mouseover.
[config-as-code-only]: https://eng.ms/docs/products/1es-data-insights/merlinbot/extensions/bot-config-as-code
[FabricBot Configuration Portal]: https://portal.fabricbot.ms/bot/?repo=microsoft/terminal
[configure VS Code]: https://code.visualstudio.com/Docs/languages/json#_json-schemas-and-settings
Co-authored-by: msftbot[bot] <48340428+msftbot[bot]@users.noreply.github.com>
Co-authored-by: Dustin Howett <duhowett@microsoft.com>
## Summary of the Pull Request
Replaces most uses of `Viewport::CompareInBounds()` with `til::point`'s `<` and `>` operators. `CompareInBounds` has been the cause of a bunch of UIA crashes over the years. Replacing them entirely ensures that the `FAILFAST_IF` isn't ever touched.
Unfortunately, we still need `IncrementInBounds` and `DecrementInBounds` to have support for that exclusive end.
## References
#13183
This commit fixes a bug causing the OpenConsole to get increasingly larger
every time the font is changed when the AtlasEngine is active.
The only impact this bug had on Windows Terminal is that the
`font-size` in HTML and RTF selection copies are too large.
## Validation Steps Performed
* OpenConsole window size doesn't change when
switching between main and alt buffer ✅
[Git2Git] Merged PR 7517171: Fix a race condition in ServiceLocator::RundownAndExit
The whole premise of RundownAndExit is that one thread enters it, runs
down the console and terminates it. One thread enters, 0 threads leave.
After some recent console locking changes, we found that on OneCore
devices it was possible for two threads (the I/O thread and the coniosrv
Input thread) to try to rundown and exit at the same time.
This SRWLOCK prevents that from happening.
Fixes#40146639
Related work items: #40146639 Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev ff235c6e49e065bccc937dee91f43ff310b5743c
Related work items: #40146639
[Git2Git] Merged PR 7517072: conhost: Force the double-click tests to have a high click timeout
The conhost tests might run somewhere that does not have a double click time.
We should hardcode a value for the purposes of testing.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 3c2620dab577e16e8672b369e4dfcde7c02881a1
Related work items: MSFT-40150725
This introduces the build rules for midi.lib to the OS!
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev fb066544f112ae491bb1d1f73578bc47fa167b41
In #6810, we introduced a "quirk" for all known versions of PowerShell
that suppressed their requests for black background/gray foreground.
This was done to avoid an [issue in PSReadline] where it would paint
black bars all over the screen if the default background color wasn't
the same as the ANSI black color.
Years have passed since that quirk was introduced. The underlying bug
was fixed, and the fix was released broadly long ago. It's time for us
to remove the quirk... almost.
Terminal still runs on versions of Windows that ship a broken version of
PSReadline. We must maintain the quirk there -- the user can't do
anything about it, and we would make their experience worse if we
removed the quirk entirely.
PowerShell 7.0 also ships a broken version of PSReadline. It is still in
support for another 6 months, but updates have been available for some
time. We can encourage users to update.
Therefore, we only need the quirk for Windows PowerShell, and then only
for specific versions of Windows.
_Inside Windows_, we don't even need that: we're guaranteed to be built
alongside a fixed version of PowerShell!
Closes#6807
[issue in PSReadline]: https://github.com/PowerShell/PSReadLine/issues/830#issuecomment-650508857
## Summary of the Pull Request
Introduced in #10824, this fixes a bug where you could use keyboard selection to move below the scroll area. Instead, we now clamp movement to the mutable viewport (aka the scrollable area). Specifically, we clamp to the corners (i.e. 0,0 or bottom right cell of scroll area).
## Validation Steps Performed
✅ (no output) try to move past bottom of viewport
✅ (with output, at bottom of scroll area) try to move past viewport
✅ (with output, NOT at bottom of scroll area) try to move past viewport
✅ try to move past top of viewport
It's not useful to notify users that WT can be made the default if it's already
clearly being used for handoff. This commit will suppresses the banner then.
## PR Checklist
* [x] Closes#13314
* [x] I work here
## Validation Steps Performed
* Modify `TerminalPage::ShowSetAsDefaultInfoBar` to not check for
`CascadiaSettings::IsDefaultTerminalSet()`
* Set Terminal Dev as the default
* Set incoming connections to open in the latest Terminal window
* Delete `state.json` after every test below
* Launching Terminal Dev shows the banner ✅
Launching `cmd.exe` dismisses the banner in the current Terminal ✅
* Launching `cmd.exe` launches Terminal Dev without banner ✅
These files are vestigial, because we are also shipping (either as loose
files or embedded in resources.pri) precompiled xbf/xaml binary format
files.
This saves us almost 500kb on disk.
Fixes#11687
Validation
----------
I ran a local build and saw that it produced a working Terminal, packaged
and unpackaged.
## Summary of the Pull Request
This introduces a selection marker overlay that tells the user which endpoint is currently being moved by the keyboard. The selection markers are respect font size changes and `cursor` color.
## References
#715 - Keyboard Selection
#2840 - Keyboard Selection Spec
#5804 - Mark Mode Spec
## Detailed Description of the Pull Request / Additional comments
- `TermControl` layer:
- Use a canvas (similar to the one used for hyperlinks) to be able to draw the selection markers.
- If we are notified that the selection changed, update the selection markers appropriately.
- `UpdateSelectionMarkersEventArgs` lets us distinguish between mouse and keyboard selections. `ClearMarkers` is set to true in the following cases...
1. Mouse selection, via SetEndSelectionPoint
2. `LeftClickOnTerminal`, pretty self-explanatory
3. a selection created from searching for text
- `ControlCore` layer:
- Responsible for notifying `TermControl` to update the selection markers when a selection has changed.
- Transfers info (the selection endpoint positions and which endpoint we're moving) from the terminal core to the term control.
- `TerminalCore` layer:
- Provides the viewport position of the selection endpoints.
## Validation Steps Performed
- mouse selection (w/ and w/out shift) --> no markers
- keyboard selection --> markers
- markers update appropriately when we pivot the selection
- markers scroll when you hit a boundary
- markers take the color of the cursor color setting
- markers are resized when the font size changes
## Summary of the Pull Request
When you execute a `cls` in the cmd shell, or `Clear-Host` in
PowerShell, we have a pair of shims that attempt to detect those
operations and forward an `ED3` sequence to conpty to clear the
scrollback.
If there was a linefeed at the bottom of the viewport immediately
prior to those functions being called, that event might still be
pending, and only forwarded to conpty after the `ED3`. The result
then is a line pushed into the scrollback that shouldn't be there.
This PR tries to avoid that situation by forcing the renderer to
flush before the `ED3` sequence is sent.
## References
The `cls` and `Clear-Host` shims were originally added in PR #5627.
## PR Checklist
* [x] Closes#5770
* [x] Closes#13320
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not
checked, I'm ready to accept this work might be rejected in favor of a
different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I've manually tested in PowerShell with `echo Hello; Clear-Host` (this
is the only way I could reliably reproduce the original problem), and in
the cmd shell with `cls`. Both cases are now working as expected.
When we send this ShowWindow message, if we send it to it's
going to need to get processed by the window message thread before
returning. We're handling this message under lock. However, the first
thing the conhost message thread does is lock the console. That'll
deadlock us. So unlock here, first, to let the message thread deal with
this message, then re-lock so later on this thread can unlock again
safely.
* [x] Closes#13301
* [x] Tested conhost
* [x] Tested terminal
When I moved this into ControlCore, I forgot that UserScrollViewport is usually triggered by the scrollbar updating, so it doesn't ask the UI to update. Since this logic is in ControlCore, it's sorta in a weird place where it needs to communicate both up and down:
* update the `Terminal`'s viewport position
* update the `TermControl`'s scrollbar position
Checklist:
* [x] Closes a bug bash bug
* [x] Missed in #12948
* See also #11000
ed27737 contains a regression were a `RECT` in `GdiEngine` wasn't properly
initialized anymore. Due to this, rendering during scrolling behaved erratic.
To find other cases of this bug in ed27737 the following regex was used:
```
^-.* = \{\s*\d*\s*\};
```
It appears that only `GdiEngine` was affected by a bug of this kind,
but just to be sure, this PR reverts all other instances.
This bug was likely caused when I tried to undo some of the changes in
ed27737 to make the PR smaller, but failed to revert the code properly.
## PR Checklist
* [x] Closes#13270
* [x] I work here
## Validation Steps Performed
I'm unable to reproduce the issue on my hardware and am unable to test
this change, but the uninitialized struct is clearly a bug regardless.
Co-authored-by: James Holderness <j4_james@hotmail.com>
Adds an accelerator key for the shell extension: `T` for stable, `P` for preview and `D` for dev.
# Validation
Ran a dev build and saw the keyboard accelerator assigned.
Closes#13061
## Summary of the Pull Request
Up to now we haven't supported passing `DCS` sequences over conpty, so
any `DCS` operations would just be ignored in Windows Terminal. This PR
introduces a mechanism whereby we can selectively pass through
operations that could reasonably be handled by the connected terminal
without interfering with the regular conpty renderer. For now this is
just used to support restoring the `DECCTR` color table report.
## References
Support for `DECCTR` was originally added to conhost in PR #13139.
## PR Checklist
* [x] Closes#13223
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not
checked, I'm ready to accept this work might be rejected in favor of a
different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
The way this works is we have a helper method in `AdaptDispatch` that
`DCS` operations can use to create a passthrough `StringHandler` for the
incoming data instead of their usual handler. To make this passthrough
process more efficient, the handler buffers the data before forwarding
it to conpty.
However, it's important that we aren't holding back data if output is
paused before the string terminator, so we need to flush the buffer
whenever we reach the end of the current write operation. This is
achieved by querying a new method in the `StateMachine` that lets us
know if we're currently dealing with the last character.
Another issue that came up was with the way the `StateMachine` caches
sequences that it might later need to forward to conpty. In the case of
string sequences like `DCS`, we don't want the actual string data cached
here, because that will just waste memory, and can also result in the
data being mistakenly output. So I've now disabled that caching when
we're in any of the string processing states.
## Validation Steps Performed
I've manually confirmed that the `DECCTR` sequence can now update the
color table in Windows Terminal. I've also added a new unit test in
`ConptyRoundtripTests` to verify the sequence is being passed through
successfully.
As described in #13238. libuv sends a focus event to jiggle the handle. Now that we support focus events as VT input (#12900), we'd translate those focus events to VT input as well. That combination of things caused exiting neovim to emit a `\x1b[O` to the input line of the shell when exited.
To fix this, we're going to secretly filter out any focus events that came from the API, before translating to VT. We're fortunate here, the `FOCUS_EVENT_RECORD` version of the ctor is only called by the API.
* [x] Closes#13238
When loading color schemes from Json, check if GetValueForKey failed. If
it did, and we were searching for the colors "purple"/"brightPurple",
swap out the color name with "magenta"/"brightMagenta" and try again.
This was tested manually by creating a new color scheme using the colors
"magenta"/"brightMagenta" and loading it, then printing colored text in
the terminal to assure that the colors were correctly assigned as
purple.
This changes the color loader to use an index pair table to add support
for alternate color names.
## Validation Steps Performed
- Manually edit settings.json, creating a new color scheme with colors
"magenta" and "brightMagenta"
- View the color scheme in settings - the colors will appear as "purple"
and "brightPurple" in the UI
- Run a program that prints colored text, purple and brightPurple text
will appear in the colors defined as magenta and brightMagenta
- Modify the color scheme in the settings UI and save it, the colors
will be saved as "purple" and "brightPurple" *(I think this is the
right behavior, since calling them "magenta" is technically a
mistake)*
- Repeat the steps above with a normal color scheme - colors named
"purple" and "brightPurple" still load properly
Closes#11456
Windows Terminal Preview gets existing settings from Release build if
Preview settings are empty
This ensures that when settings are empty or not existent, we check if
we're currently in a preview build and if we are, we attempt to grab
settings from the Release build's setting path instead. We tested it
manually by changing settings in Release build and confirming that
changes migrated to Preview when settings are empty or not existent.
Additionally, we tested that settings.json of the running build changed.
We also ran existing TAEF testing locally and it passed.
In LoadAll() function in
src\cascadia\TerminalSettingsModel\CascadiaSettingsSerialization.cpp, we
first checked if the settings file us empty/exists via settingsString.
If it does not and we are in the Preview build, we try loading the
Release build's settings. We created modified versions of
CascadiaSettings::_settingsPath() and GetBaseSettingsPath() to get the
path for the Release build's settings. If the Release build settings do
exist and firstTimeSetup is true, we set it to settingsString so it can
be written to disk via WriteSettingsToDisk(). Note that currently we
hardcode the path of the Release build. This pull request was worked on
with @Dannihu01.
## Validation Steps Performed Test1: Setting to firstTimeSetup is true
and loading settings.json from WT release when release exists -> Result:
settings.json AND GUI reflected WT release’s settings
Test2: Setting to firstTimeSetup is true and loading settings.json from
WT release when release doesn’t exist -> Result: settings.json AND GUI
reflected DEFAULT settings
Test3: (After running Test1) Setting to firstTimeSetup is false and
seeing if current settings.json matches WT release. (See if it doesn’t
change) -> Result: settings.json AND GUI reflected WT release’s settings
Closes#6855
Co-authored-by: Danniell Hu <dannihu@umich.edu>
## Summary of the Pull Request
This fixes the crashes caused by using a screen reader when in an app that uses the alt buffer via two changes:
1. Fix `Terminal::ViewEndIndex()`
- `UiaTextRangeBase` receives a coordinate that is outside of the bounds of the text buffer via the following chain of functions... `_getDocumentEnd()` --> `GetLastNonSpaceCharacter()` --> `_getOptimizedBufferSize()` --> `GetTextBufferEndPoisition()` --> `ViewEndIndex()`
- Since support for the alt buffer was added recently, `ViewEndIndex()` was recently changed, so that explains why this issue came up recently. We were accidentally setting the view end index to `height` instead of `height-1`. Thanks @j4james for finding this!
- The UIA code would get the "exclusive end" of the alt buffer. Since it was using `ViewEndIndex()` to calculate that, it was one more than it should be. The UIA code has explicit allowance for "one past the end of the viewport" in its `IsInBounds()` check. Since the `ViewEndIndex()` is way beyond that, it's not allowed, hitting the fail fast.
2. Replace `FAIL_FAST_IF` with `assert`
- These fail fast calls have caused so many issues with our UIA code. Those checks still provide value, but they shouldn't take the whole app down. This change replaces the `Viewport` and `UiaTextRangeBase` fail fasts with asserts to still perform those checks, but not take down the entire app in release builds.
Closes#13183
## Validation Steps Performed
While using Narrator...
- opened nano in bash
- generated text and scrolled in nano
- generated text and scrolled in PowerShell
See also: #12799, the origin of much of this.
This change evolved over multiple phases.
### Part the first
When we create a defterm connection in `TerminalPage::_OnNewConnection`,
we don't have the hosting HWND yet, so the tab gets created without one.
We'll later get called with the owner, in `Initialize`.
To remedy this, we need to:
* In `Initialize`, make sure to update any existing controls with the
new owner.
* In `ControlCore`, actually propogate the new owner down to the
connection
### Part the second
DefTerm launches don't actually request focus mode, so the Terminal
never sends them focus events. We need those focus events so that the
console can request foreground rights.
To remedy this, we need to:
* pass `--win32input` to the commandline used to initialize OpenConsole
in ConPTY mode. We request focus events at the same time we request
win32-input-mode.
* I also added `--resizeQuirk`, because _by all accounts that should be
there_. Resizing in defterm windows should be _wacky_ without it, and
I'm a little surprised we haven't seen any bugs due to this yet.
### Part the third
`ConsoleSetForeground` expects a `HANDLE` to the process we want to give
foreground rights to. The problem is, the wire format we used _also_
decided that a HANDLE value was a good idea. It's not. If we pass the
literal value of the HANDLE to the process from OpenConsole to conhost,
so conhost can call that API, the value that conhost uses there will
most likely be an invalid handle. The HANDLE's value is its value in
_OpenConsole_, not in conhost.
To remedy this, we need to:
* Just not forward `ConsoleSetForeground`. Turns out, we _can_ just call
that in OpenConsole safely. There's no validation. So just instantiate
a static version of the Win32 version of ConsoleControl, just to use
for SetForeground. (thanks Dustin)
* [x] Tested manually - Win+R `powershell`, `notepad` spawns on top.
Closes#13211
Implements the **FTCS_PROMPT** sequence, `OSC 133 ; A ST`. In this PR, it's just used to set a simple Prompt mark on the current line, in the same way that the iTerm2 sequence works.
There's rumination in #11000 on how to implement the rest of the FTCS sequences.
This is broken into its own PR at the moment. [Quoth j4james](https://github.com/microsoft/terminal/pull/12948#issuecomment-1136360132):
> That should be just as easy, and I've noticed a couple of other terminals that are doing that, so it's not unprecedented. If we don't have any immediate use for the other options, there shouldn't be any harm in ignoring them initially.
>
> And the benefit of going with the more widely supported sequence is that we're more likely to benefit from any shells that have this functionality built in. Otherwise they're forced to try and detect the terminal, which is practically impossible for Windows Terminal. Even iTerm2 supports the `OSC 133` sequence, so we'd probably be the only odd one out.
This part of the plumbing is super easy, so I thought it would be valuable to add regardless if we get to the whole of FTCS in 1.15.
* [x] I work here
* [x] Tested manually - in my pwsh `$PROFILE`:
```pwsh
function prompt {
$loc = $($executionContext.SessionState.Path.CurrentLocation);
$out = "PS $loc$('>' * ($nestedPromptLevel + 1)) ";
$out += "$([char]27)]9;9;`"$loc`"$([char]07)";
$out += "$([char]27)]133;A;$([char]7)"; # add the FTCS_PROMPT to the... well, end, but you get the point
return $out
}
```
* See also #11000
* conhost requires an additional dependency in Windows, which might
cause us trouble in WPG
* Terminal requires an additional *package* dependency, which *will*
cause us trouble in WPG (since GmDls is about 3MB)
I chose to scope the feature checks to MidiOut directly, as I wanted to
keep the delay behavior in MidiAudio::PlayNote. This is negotiable.
References #13252
Adds support for marks in the scrollbar. These marks can be added in 3
ways:
* Via the iterm2 `OSC 1337 ; SetMark` sequence
* Via the `addMark` action
* Automatically when the `experimental.autoMarkPrompts` per-profile
setting is enabled.
#11000 has more tracking for the big-picture for this feature, as well
as additional follow-ups. This set of functionality seemed complete
enough to send a review for now. That issue describes these how I wish
these actions to look in the fullness of time. This is simply the v0.1
from the hackathon last month.
#### Actions
* `addMark`: add a mark to the buffer. If there's a selection, use
place the mark covering at the selection. Otherwise, place the mark
on the cursor row.
- `color`: a color for the scrollbar mark. This is optional - defaults
to the `foreground` color of the current scheme if omitted.
* `scrollToMark`
- `direction`: `["first", "previous", "next", "last"]`
* `clearMark`: Clears marks at the current postition (either the
selection if there is one, or the cursor position.
* `clearAllMarks`: Don't think this needs explanation.
#### Per-profile settings
* `experimental.autoMarkPrompts`: `bool`, default `false`.
* `experimental.showMarksOnScrollbar`: `bool`
## PR Checklist
* [x] Closes#1527
* [x] Closes#6232
## Detailed Description of the Pull Request / Additional comments
This is basically hackathon code. It's experimental! That's okay! We'll
figure the rest of the design in post.
Theoretically, I should make these actions `experimental.` as well, but
it seemed like since the only way to see these guys was via the
`experimental.showMarksOnScrollbar` setting, you've already broken
yourself into experimental jail, and you know what you're doing.
Things that won't work as expected:
* resizing, ESPECIALLY reflowing
* Clearing the buffer with ED sequences / Clear Buffer
I could theoretically add velocity around this in the `TermControl`
layer. Always prevent marks from being visible, ignore all the actions.
Marks could still be set by VT and automark, but they'd be useless.
Next up priorities:
* Making this work with the FinalTerm sequences
* properly speccing
* adding support for `showMarksOnScrollbar: flags(categories)`, so you
can only display errors on the scrollbar
* adding the `category` flag to the `addMark` action
## Validation Steps Performed
I like using it quite a bit. The marks can get noisy if you have them
emitted on every prompt and the buffer has 9000 lines. But that's the
beautiful thing, the actions work even if the marks aren't visible, so
you can still scroll between prompts.
<details>
<summary>Settings blob</summary>
```jsonc
// actions
{ "keys": "ctrl+up", "command": { "action": "scrollToMark", "direction": "previous" }, "name": "Previous mark" },
{ "keys": "ctrl+down", "command": { "action": "scrollToMark", "direction": "next" }, "name": "Next mark" },
{ "keys": "ctrl+pgup", "command": { "action": "scrollToMark", "direction": "first" }, "name": "First mark" },
{ "keys": "ctrl+pgdn", "command": { "action": "scrollToMark", "direction": "last" }, "name": "Last mark" },
{ "command": { "action": "addMark" } },
{ "command": { "action": "addMark", "color": "#ff00ff" } },
{ "command": { "action": "addMark", "color": "#0000ff" } },
{ "command": { "action": "clearAllMarks" } },
// profiles.defaults
"experimental.autoMarkPrompts": true,
"experimental.showMarksOnScrollbar": true,
```
</details>
ed27737 contains a regression where (pseudocode)
```c
unsigned long ulActualDelta;
short ScreenInfo.WheelDelta;
delta *= (ScreenInfo.WheelDelta / (short)ulActualDelta);
// ^^^^^^^
```
was changed to
```c
delta *= (ScreenInfo.WheelDelta / ulActualDelta);
```
Due to `ulActualDelta` being unsigned, the new code casts the signed integer
to a unsigned one first, before doing the division. This causes scrolling
downwards (`WheelDelta` is negative) to appear as a large positive `delta`.
## PR Checklist
* [x] Closes#13253
* [x] I work here
## Validation Steps Performed
* Scrolling up/down works in OpenConsole again ✅
When #13160 introduced a new interface to the IConsoleHandoff idl, it
changed midl's RPC proxy stub lookup algorithm from a direct GUID
comparison to an unrolled binary search. Now, that would ordinarily not
be a problem...
However, in #11610, we took a shortcut and replaced `memcmp` -- used
only by RPC for GUID comparison -- with a direct GUID-only equality
comparator. This worked totally fine, and ordinarily would not be a
problem...
The unrolled binary search unfortunately _relies on memcmp's contract_:
it uses memcmp to match against a fully sorted set. Our memcmp only
returned 0 or 1 (equal or not), and it knew nothing about ordering.
When a package that contains a PackagedCOM proxy stub is installed, it
is selected as the primary proxy stub for any interfaces it can proxy.
After all, interfaces are immutable, so it doesn't matter whose proxy
you're using. Now, given that we installed a *broken* proxy... *all*
IIDs that got whacked by our memcmp issue broke for every consumer.
To fix it: instead of implementing memcmp ourselves, we're just going to
take a page out of WinAppSDK's book and link this binary using the
"Hybrid CRT" model. It will statically link any parts of the STL it uses
(none) and dynamically link the ucrt (which is guaranteed to be present
on Windows.)
Sure, the binary size goes up from 8k to 24k, but... the cost is never
having to worry about this again.
Closes#13251
## Summary of the Pull Request
When a profile gets deleted, we were navigating to the next item assuming it was a profile when it may not be. This commit fixes this by checking the tag of the next menu item before we navigate to it.
## PR Checklist
* [x] Closes#13125
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Deleting the last profile in the SUI doesn't cause a crash
If we want to make Windows Terminal the default terminal under Windows,
we'll have to make conhost "handoff" incoming connections by default.
But this poses a problem: How can the seldomly updated conhost know
whether the routinely updated Windows Terminal version is actually willing
to accept such handoffs by default (it might be unwilling due to bugs, etc.)?
This commit solves the issue by introducing:
* A marker interface (`IDefaultTerminalMarker`): If it exists,
Windows Terminal indicates its willingness to accept the handoff.
* Turning the all-0 GUID from being synonymous for conhost,
to being synonymous for "Let Windows decide". Without this we wouldn't
be able to differentiate between users who consciously chose conhost
as their default terminal, vs. users who want the standard behavior.
Testing fallback behavior:
* Install "Terminal" 1.13
* Delete the 2 keys below `HKCU\Console\%%Startup`
* Enable `Feature_AttemptHandoff` in `features.xml`
Return `true` from `DefaultApp::CheckShouldTerminalBeDefault`
* Replace `conhost.exe` and `console.dll` with `sfpcopy` after building
* Launching `cmd.exe` launches as a conhost window ✅
(because "Terminal" 1.13 lacks the marker interface)
* Open properties page in `conhost.exe`
"Let Windows decide" is select by default ✅
* Changing the selection writes the new value ✅
Testing the new behavior:
* Delete the 2 keys below `HKCU\Console\%%Startup`
* Enable `Feature_AttemptHandoff` in `features.xml`
Return `true` from `DefaultApp::CheckShouldTerminalBeDefault`
* Use `CLSID_WindowsTerminalConsoleDev` and `CLSID_WindowsTerminalTerminalDev`
for the initialization of `TerminalDelegationPair`
* Replace `conhost.exe` and `console.dll` with `sfpcopy` after building
* Deploy the "Terminal Dev" package
* Launching `cmd.exe` launches "Terminal Dev" ✅
(because "Terminal Dev" has the marker interface)
* Open the settings tab
"Let Windows decide" is select by default ✅
* Changing the selection and saving writes the new value ✅
(cherry picked from commit 1b81c6540f)
Service-Card-Id: 82925080
Service-Version: Inbox
If we want to make Windows Terminal the default terminal under Windows,
we'll have to make conhost "handoff" incoming connections by default.
But this poses a problem: How can the seldomly updated conhost know
whether the routinely updated Windows Terminal version is actually willing
to accept such handoffs by default (it might be unwilling due to bugs, etc.)?
This commit solves the issue by introducing:
* A marker interface (`IDefaultTerminalMarker`): If it exists,
Windows Terminal indicates its willingness to accept the handoff.
* Turning the all-0 GUID from being synonymous for conhost,
to being synonymous for "Let Windows decide". Without this we wouldn't
be able to differentiate between users who consciously chose conhost
as their default terminal, vs. users who want the standard behavior.
## Validation Steps Performed
Testing fallback behavior:
* Install "Terminal" 1.13
* Delete the 2 keys below `HKCU\Console\%%Startup`
* Enable `Feature_AttemptHandoff` in `features.xml`
Return `true` from `DefaultApp::CheckShouldTerminalBeDefault`
* Replace `conhost.exe` and `console.dll` with `sfpcopy` after building
* Launching `cmd.exe` launches as a conhost window ✅
(because "Terminal" 1.13 lacks the marker interface)
* Open properties page in `conhost.exe`
"Let Windows decide" is select by default ✅
* Changing the selection writes the new value ✅
Testing the new behavior:
* Delete the 2 keys below `HKCU\Console\%%Startup`
* Enable `Feature_AttemptHandoff` in `features.xml`
Return `true` from `DefaultApp::CheckShouldTerminalBeDefault`
* Use `CLSID_WindowsTerminalConsoleDev` and `CLSID_WindowsTerminalTerminalDev`
for the initialization of `TerminalDelegationPair`
* Replace `conhost.exe` and `console.dll` with `sfpcopy` after building
* Deploy the "Terminal Dev" package
* Launching `cmd.exe` launches "Terminal Dev" ✅
(because "Terminal Dev" has the marker interface)
* Open the settings tab
"Let Windows decide" is select by default ✅
* Changing the selection and saving writes the new value ✅
## Summary of the Pull Request
This introduced the `toggleBlockSelection` action to allow users to create a block selection using only the keyboard. This is not bound to any keys by default, however it is added to the command palette.
## References
#4993 - Epic
#5804 - Spec
## Validation Steps Performed
- [X] Mark mode always starts in line selection mode
- [X] Mouse selections are always in line selection mode by default
- [X] Can toggle block selection for an existing selection (regardless of how it was created)
- [X] The selection is copied properly (aka, no rendering issues)
Previously this project used a great variety of types to present text buffer
coordinates: `short`, `unsigned short`, `int`, `unsigned int`, `size_t`,
`ptrdiff_t`, `COORD`/`SMALL_RECT` (aka `short`), and more.
This massive commit migrates almost all use of those types over to the
centralized types `til::point`/`size`/`rect`/`inclusive_rect` and their
underlying type `til::CoordType` (aka `int32_t`).
Due to the size of the changeset and statistics I expect it to contain bugs.
The biggest risk I see is that some code potentially, maybe implicitly, expected
arithmetic to be mod 2^16 and that this code now allows it to be mod 2^32.
Any narrowing into `short` later on would then throw exceptions.
## PR Checklist
* [x] Closes#4015
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
Casual usage of OpenConsole and Windows Terminal. ✅
This PR introduces the framework for the `DECRSTS` sequence which is
used to restore terminal state reports. But to start with, I've just
implemented the `DECCTR` color table report, which provides a way for
applications to alter the terminal's color scheme.
## PR Checklist
* [x] Closes#13132
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
I've added the functions for parsing DEC RGB and HLS color formats into
the `Utils` class, where we've got all our other color parsing routines,
since this functionality will eventually be needed in other VT protocols
like Sixel and ReGIS.
Since `DECRSTS` is a `DCS` sequence, this only works in conhost for now,
or when using the experimental passthrough mode in Windows Terminal.
## Validation Steps Performed
I've added a number of unit tests to check that the `DECCTR` report is
being interpreted as expected. This includes various edge cases (e.g.
omitted and out-of-range parameters), which I have confirmed to match
the color parsing on a real VT240 terminal.
## Summary of the Pull Request
The `DECPS` (Play Sound) escape sequence provides applications with a
way to play a basic sequence of musical notes. This emulates
functionality that was originally supported on the DEC VT520 and VT525
hardware terminals.
## PR Checklist
* [x] Closes#8687
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #8687
## Detailed Description of the Pull Request / Additional comments
When a `DECPS` control is executed, any further output is blocked until
all the notes have finished playing. So to prevent the UI from hanging
during this period, we have to temporarily release the console/terminal
lock, and then reacquire it before returning.
The problem we then have is how to deal with the terminal being closed
during that unlocked interval. The way I've dealt with that is with a
promise that is set to indicate a shutdown. This immediately aborts any
sound that is in progress, but also signals the thread that it needs to
exit as soon as possible.
The thread exit is achieved by throwing a custom exception which is
recognised by the state machine and rethrown instead of being logged.
This gets it all the way up to the root of the write operation, so it
won't attempt to process anything further output that might still be
buffered.
## Validation Steps Performed
Thanks to the testing done by @jerch on a real VT525 terminal, we have a
good idea of how this sequence is supposed to work, and I'm fairly
confident that our implementation is reasonably compatible.
The only significant difference I'm aware of is that we support multiple
notes in a sequence. That was a feature that was documented in the
VT520/VT525 manual, but didn't appear to be supported on the actual
device.
MSFT-33471786 is one of the most common crashes we have right now.
Memory dumps suggest that `VtEngine::UpdateViewport` is called with a rectangle
like `(0, 46, 119, 29)` (left, top, right, bottom), which is a rectangle of
negative height. When the `_invalidMap` is resized the negative size gets
turned into a very large unsigned integer, which results in an OOM exception,
crashing OpenConsole.
`VtEngine::UpdateViewport` is called by `Renderer::_CheckViewportAndScroll`
which holds a (cached) old and a new viewport. The old viewport was
`(0, 46, 119, 75)` which is exceedingly similar to the invalid, new viewport.
It's bottom coordinate is also coincidentally larger by exactly 46 (top).
The viewport comes from the `SCREEN_INFORMATION` class whose `SetViewport`
function was highly suspicious as it has a branch which updates the bottom
to be the buffer height, but leaves the top unmodified.
`SCREEN_INFORMATION::SetViewport` is called by `SetConsoleWindowInfo` which
processes user-provided data. A repro of the crash can be constructed with:
```
SMALL_RECT rect{0, 46, 119, 75};
SetConsoleWindowInfo(GetStdHandle(STD_OUTPUT_HANDLE), TRUE, &rect);
```
Closes#13193
Closes MSFT-33471786
## Validation Steps Performed
Ensured the following code doesn't crash when run under Windows Terminal:
```
SMALL_RECT rect{0, 46, 119, 75};
SetConsoleWindowInfo(GetStdHandle(STD_OUTPUT_HANDLE), TRUE, &rect);
```
This commit hides the "Open in Terminal" context menu option when the
context menu is opened in a non-filesystem path like "Quick Actions".
Closes#12578
This is a big hammer to put out this fire. We're keeping the hiding around for now, cause we think that's likely the one that the internal tests use that we really care about here. If we need to bring this back, we can.
* [x] Closes#13158
* [x] Closes#13162
* [x] Validated these both manually
* [x] `[Native]::ShowWindow([Native]::GetConsoleWindow(), 6)` still works
Prevents a null pointer dereference when attempting to split a settings tab, due to it not being a terminal tab.
* [x] Closes#13166
## Validation Steps Performed
Manually tested.
This only impacts the UI. We can take a workitem to rename the loc data
later. When the user specifies zh-Hans/zh-Hant, the resource mapper does
the right thing.
Related to #8984
Use a throttled update to update our window state. Throttling should prevent scenarios where the Terminal window state and PTY window state get de-sync'd, and cause the window to minimize/restore constantly in a loop. "Should" is doing a lot of work in this sentence.
A 200ms delay was chosen because it's the typical animation timeout in Windows. This does result in a delay between the PTY requesting a change to the window state and the Terminal realizing it, but should mitigate issues where the Terminal and PTY get desync'd.
I think we're overall not super confident that this fixes the root causes of the issue. Rather, we're hopeful that a small amount of throttling here should leave time for the Terminal and pty to sync back up. We're comfortable enough with that as a bandaid for 1.14 preview, to see how this behaves in the wild.
ThemeResources are a persistent pain.
Regressed in #13083. See also #12775 et. al.
We can't just put those here though as StaticResources, because XAML will evaluate their values when the App is first loaded, and we'll always use the value from the OS theme, regarless of the requested theme. Kinda the same thing we've had to do with TabViewBackground in the past.
* [x] Fixes something we noticed right before shipping
We're doing it this way because ThemeResources are tricky. We
default in XAML to using the appropriate ThemeResource background
color for our TabRow. When tabs in the titlebar are _disabled_,
this will ensure that the tab row has the correct theme-dependent
value. When tabs in the titlebar are _enabled_ (the default),
we'll switch the BG to Transparent, to let the Titlebar Control's
background be used as the BG for the tab row.
We can't do it the other way around (default to Transparent, only
switch to a color when disabling tabs in the titlebar), because
looking up the correct ThemeResource from and App dictionary is a
capital-H Hard problem.
* [x] Closes#13143
* [x] I work here
* [x] validated manually:
- [x] showTabsInTitlebar: false, true
- [x] useAcrylicInTabRow: false, true
- [x] theme: light, dark
* [x] Need to check if this is regressed the same in 1.13. I suspect it is.
## Summary of the Pull Request
Introduces a non-configurable version of mark mode to Windows Terminal. It has the following interactions defined:
- <kbd>ctrl+shift+m</kbd> --> Enter Mark Mode
- when in Mark Mode...
- <kbd>ESC</kbd> --> Exit Mark Mode
- arrow keys --> move "start"
- <kbd>shift</kbd> + arrow keys --> anchor "start", move "end"
- <kbd>ctrl+a</kbd> --> select all
- when a selection is active...
When in mark mode, the cursor does not blink.
## References
#4993 - [Epic] Keyboard Selection
## PR Checklist
* [X] Closes#715
* [X] Provides a resolution for #11985
## Detailed Description of the Pull Request / Additional comments
- `TermControl`:
- `TermControl.cpp` just adds logic to prevent the cursor from blinking when in mark mode
- `ControlCore`
- in the same place we handle quick edit, we add an entry point to mark mode
- `TerminalCore`
- this leverages `UpdateSelection()` and other quick edit functions to make mark mode happen
## Validation Steps Performed
- [x] Make selection, split pane, close pane
- NOTE: A similar scenario caused a crash at one point. Really weird. Keep an eye on it.
- [x] Cursor is off when in mark mode
- [x] general movement/selection
- [x] general movement/selection that forces the viewport to move
- [x] In mark mode, selectAll...
- [x] arrow keys --> move start
- [x] shift + arrow keys --> move end
- [x] (regardless of mark mode) if selection active, enter --> copy to clipboard
Well this one feels dumb.
Make sure to also initially set the visibility of ConPTY windows created for DefTerm connections.
* [x] Closes#13066 for real.
* [x] tested manually.
A bad merge, that actually revealed a horrible bug.
There was a secret conflict between the code in #12526 and #12515. 69b77ca was a bad merge that hid just how bad the issue was. Fixing the one line `nullptr`->`this` in `InteractivityFactory` resulted in a window that would flash uncontrollably, as it minimized and restored itself in a loop. Great.
This can seemingly be fixed by making sure that the conpty window is initially created with the owner already set, rather than relying on a `SetParent` call in post. This does pose some complications for the #1256 future we're approaching. However, this is a blocking bug _now_, and we can figure out the tearout/`SetParent` thing in post.
* fixes#13066.
* Tested with the script in that issue.
* Window doesn't flash uncontrollably.
* `gci | ogv` still works right
* I work here.
* Opening a new tab doesn't spontaneously cause the window to minimize
* Restoring from minimized doesn't yeet focus to an invisible window
* Opening a new tab doesn't yeet focus to an invisible window
* There _is_ a viable way to call `GetAncestor` s.t. it returns the Terminal's hwnd in Terminal, and the console's in Conhost
The `SW_SHOWNOACTIVATE` change is also quite load bearing. With just `SW_NORMAL`, the pseudo window (which is invisible!) gets activated whenever the terminal window is restored from minimized. That's BAD.
There's actually more to this as well.
Calling `SetParent` on a window that is `WS_VISIBLE` will cause the OS to hide the window, make it a _child_ window, then call `SW_SHOW` on the window to re-show it. `SW_SHOW`, however, will cause the OS to also set that window as the _foreground_ window, which would result in the pty's hwnd stealing the foreground away from the owning terminal window. That's bad.
`SetWindowLongPtr` seems to do the job of changing who the window owner is, without all the other side effects of reparenting the window.
Without `SetParent`, however, the pty HWND is no longer a descendant of the Terminal HWND, so that means `GA_ROOT` can no longer be used to find the owner's hwnd. For even more insanity, without `WS_POPUP`, none of the values of `GetAncestor` will actually get the terminal HWND. So, now we also need `WS_POPUP` on the pty hwnd. To get at the Terminal hwnd, you'll need
```c++
GetAncestor(GetConsoleWindow(), GA_ROOTOWNER)
```
This PR adds support for the VT line rendition attributes in the DirectX
renderer, which allows for double-width and double-height line
renditions.
Line renditions were first implemented in conhost (with the GDI
renderer) in PR #8664. Supporting them in the DX renderer now is a
small step towards #11595.
The DX implementation is very similar to the GDI one. When a particular
line rendition is requested, we create a transform that is applied to
the render target. And in the case of double-height renditions, we also
initialize some clipping offsets to allow for the fact that we only
render half of a line at a time.
One additional complication exists when drawing the cursor, which
requires a two part process where it first renders to a command list,
and then draw the command list in a second step. We need to temporarily
reset the transform in that first stage otherwise it ends up being
applied twice.
I've manually tested the renderer in conhost by setting the `UseDx`
registry entry and confirmed that it passes the _Vttest_ double-size
tests as well as several of my own tests. I've also checked that the
renderer can now handle horizontal scrolling, which is a feature we get
for free with the transforms.
## Summary of the Pull Request
When the conpty passthrough mode is enabled, it often needs to send `DSR-CPR` queries (cursor position reports) to the client terminal to obtain the current cursor position. However, the code that originally handled the responses to these queries got broken by the refactoring of the `ConGetSet` API. This PR is an attempt to correct that regression.
## References
The conpty passthrough mode was introduced in PR #11264.
The refactoring that broke the cursor position handling was in PR #12703.
## PR Checklist
* [x] Closes#13106
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
Prior to the `ConGetSet` refactoring, the code that handled `DSR-CPR` responses (`InteractDispatch::MoveCursor`) would pass the cursor position to `ConGetSet::SetCursorPosition`, which in turn would forward it to the `SetConsoleCursorPositionImpl` API, and from there to the `VtIo` class.
After the refactor, all of those intermediate steps were removed - the cursor was simply updated directly in `InteractDispatch::MoveCursor`, and the `VtIo` call was moved from `SetConsoleCursorPositionImpl` to `InteractDispatch` (since that was the only place it was actually required).
However, when the conpty passthrough mode was introduced - which happened in parallel - it relied on the `SetConsoleCursorPositionImpl` API being called from `InteractDispatch` in order to handle its own `DSR-CPR` responses, and that's why things stopped working when the two PRs merged.
So what I've done now is made `InteractDispatch::MoveCursor` method call `SetConsoleCursorPositionImpl` again (although without the intermediate `ConGetSet` overhead), and moved the `VtIo::SetCursorPosition` call back into `SetConsoleCursorPositionImpl`.
This is not ideal, and there are still a bunch of problems with the `DSR-CPR` handling in passthrough mode, but it's at least as good as it was before.
## Validation Steps Performed
I've just manually tested various shells with passthrough mode enabled, and confirmed that they're working better now. There are still issues, but nothing that wasn't already a problem in the initial implementation, at least as far as I can tell.
This regressed in ad2358d.
We're interested in the size of the viewport only, but it can shift up/down
during scrolling. In these situations we shouldn't resize our buffers of course.
## Validation Steps Performed
* Scroll
* Not setting `ApiInvalidations::Size` ✅
## Summary of the Pull Request
Add `Find` to tab context menu as describe in issue #5633.
## PR Checklist
* [x] Closes#5633
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
Just wanted to solve `Easy Starter` issue, so any corrections/suggestions welcome. There's a couple of points I'm not sure of
* Placement of item within menu, currently it's at the end before close tab block.
* Should it be named longer, something like `Find in Tab` of just `Find` is fine?
* The workaround for focus similar to tab rename is a bit annoying, especially because it required adding a method to `TermControl` but without it find window obviously opens without focus which is bad.
## Validation Steps Performed
Open menu, press menu item try to find things via opened find dialog.
This commit includes various minor improvements to til::hash/point/size/rect
which accumulated while working on #4015.
* Allow xvalue containers and non-`size_t` indices in `til::at`.
* `til::as_unsigned` can be used to reinterpret a potentially signed integer
as a unsigned one. This can potentially enable some optimizations as no sign
extension is needed anymore. `til::hash` can make use of this to drop about
20% of the hashing of signed integers <= 32 bit. On x86 this translates to
a `mov` (virtually no latency) or no instructions at all, instead of
requiring a `movsx` (some latency) for sign extension.
* `til::point` operators that prefer mutability.
This is a opinionated change, but it follows the STL style beter and
generates less assembly.
* Simpler `rect` scale_up/down and `size` divide_ceil.
`scale_up` will not depend on the operator header anymore.
`scale_down` / `divide_ceil` can be implemented without checked numerics,
so I did. It also follows the related GdiEngine code better now, which
makes me confident that we can replace GdiEngine's code with this.
* Removal of rect-size-shift operators.
They were only used in DxEngine and confusing as they weren't commutative.
Adding and then subtracting a size from a rect (and vice versa) didn't do
what you'd intuitively think it'd do. The code was replaced with addition
and clamps in DxEngine.
* Various unsafe `as_` casts for point/size/rect.
This will aid the migration in #4015.
## Validation Steps Performed
* Vertical scrolling works in `DxEngine` ✅
This commit is one of the more difficult rewrites that were necessary as part
of #4015, but still simple enough that it can be done as a separate commit.
The search for the `lastNonSpace` was replaced with a simpler
`std::string_view::find_last_not_of`.
## Validation Steps Performed
ConPTY appears to work ✅
This reverts commit 14098d71f2.
## Summary of the Pull Request
@zadjii-msft found that this is causing persisted windows on a secondary monitor to shrink a little each time. We're choosing to revert this commit until that gets resolved.
## References
#12979
This commit fixes various bugs in our unit/feature test suite:
* 2 tests failed at 150% scale.
* The "null key" (@ on a US keyboard) isn't necessarily Shift+2.
The proper way to get it is with `LOBYTE(VkKeyScanW(0))`
* `InputEngineTest::C0Test` never worked as it overwrote
the loop variable, exiting the loop early
Fixes the following issues:
* `desktopWallpaper` not working
* switching tabs/panes causes the background to flicker
* settings preview having a transparent background
## PR Checklist
* [x] Closes#13002
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
Tested the 3 cases above. ✅
## Summary of the Pull Request
For some reason, the PGO tests (specifically the `RunMakeKillTabs` test) started to fail after #12979 merged. After closer inspection, the test was actually improperly written. We should be using <kbd>ctrl+shift+t</kbd> to open new tabs, not <kbd>alt+shift+t</kbd>. Presumably, the <kbd>alt</kbd> was copied over from the previous test, because they look _very_ similar.
So I went ahead and fixed the test, and it now (1) tests what it's intended to test and (2) doesn't fail. Why did #12979 cause the tests to fail? idk, but it works now.
## References
#10071 - Introduce PGO Tests
## Validation Steps Performed
Ran PGO tests locally and confirmed that it works.
Ran PGO pipeline and confirmed that it works.
When the buffer is resized with a reflow, we were previously calculating
the new virtual bottom based on the position of last non-space
character. If the viewport was largely blank when resized, this could
result in the new virtual bottom being higher than it should be.
This PR attempts to address that problem by restoring the virtual bottom
to a position that is the same distance from the cursor row as it was
prior to the resize.
This was a regression introduced in PR #12972.
We still take the last non-space row into account when determining the
virtual bottom, because if the content of the screen is forced to wrap,
the virtual bottom will need to be lower (relative to the cursor) than
it was before.
We also need to check that we don't overflow the bottom of the buffer,
which can occur when the viewport is at the bottom of the buffer, and
the cursor position is pushed down as a result of content wrapping above
it.
I've manually confirmed that this fixes the problem reported in issue
#13078, and I've also extended the existing `RefreshWithReflow` unit
test to cover that particular scenario.
Closes#13078
The `DECAC` (Assign Colors) escape sequence controls which color table
entries are associated with the default foreground and background
colors. This is how you would change the default colors on the the
original DEC VT525 terminals.
But `DECAC` also allows you to assign the color table entries for the
"window frame", which in our case is mapped to the tab color (just the
background for now). So this now gives us a way to control the tab color
via an escape sequence as well.
DETAILS
-------
The way this works is there are now two new entries in the color table
for the frame colors, and two new aliases in the color alias table that
are mapped to those color table entries. As previously mentioned, only
the background is used for now.
By default, the colors are set to `INVALID_COLOR`, which indicates that
the system colors should be used. But if the user has set a `tabColor`
property in their profile, the frame background will be initialized with
that value instead.
And note that some of the existing color table entries are now
renumbered for compatibility with XTerm, which uses entries 256 to 260
for special colors which we don't yet support. Our default colors are
now at 261 and 262, the frame colors are 263 and 264, and the cursor
color is 265.
So at runtime, you can change the tab color programmatically by setting
the color table entry at index 262 using `OSC 4` (assuming you need a
specific RGB value). Otherwise if you just want to set the tab color to
an existing color index, you can use `DECAC 2`.
You can even make the tab color automatically match background color by
mapping the frame background alias to the color table entry for the
default background, using `DECAC 2;261;262` (technically this is mapping
both the the foreground and background).
This PR doesn't include support for querying the color mapping with
`DECRQSS`, and doesn't support resetting the colors with `RIS`, but
hopefully those can be figured out in a future PR - there are some
complications that'll need to be resolved first.
## Validation Steps Performed
I've added a basic unit test that confirms the `DECAC` escape sequence
updates the color aliases in the render settings as expected. I've also
manually confirmed that the tab color in Windows Terminal is updated by
`DECAC 2`, and the default colors are updated in both conhost and WT
using `DECAC 1`.
Closes#6574
Fixes the SUI background being red in high contrast mode. The issue was
that `SolidBackgroundFillColorTertiary` purposefully has a bad High
Contrast color[^1].
The fix was to be explicit in the theme resources so that
`SolidBackgroundFillColorTertiary` is used in light and dark mode, but
the standard high contrast one is used in high contrast mode. Since the
page is the top-level XAML element in the Editor project, I had to
introduce this in the App.xaml resources so that the page can find the
theme resource.
Closes#13065Closes#13070
[^1]: 40df43a61c/dev/CommonStyles/Common_themeresources_any.xaml (L650-L651)
## Summary of the Pull Request
When calculating the position of the virtual bottom after a resize with
reflow, it was possible for it to end up less than the height of the
viewport. This meant that the top of the virtual viewport would be
negative, which resulted in other operations failing further down the
line. This PR updates the virtual bottom calculation to fix that
scenario.
## References
This was probably a regression introduced in PR #12972.
## PR Checklist
* [x] Closes#13034
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #13034
## Validation Steps Performed
I wasn't able to replicate the exact case described in issue #13034,
because I don't have Windows 11, so can't configure the default
terminal. However, I was able to reproduce a similar failure using a
`SetConsoleScreenBufferInfoEx` call, and I've confirmed that this PR
has fixed that.
I've also added another screen buffer test to make sure the
`ResizeWithReflow` method doesn't shrink the virtual bottom when
resizing at the top of the buffer.
When we start up, our window is initially just a frame with a transparent content area. We're gonna do all this startup init on the UI thread, so the UI won't actually paint till it's all done. This results in a few frames where the frame is visible, before the page paints for the first time, before any tabs appears, etc.
To mitigate this, we're gonna wait for the UI thread to finish everything it's gotta do for the initial init, and _then_ fire our Initialized event. By waiting for everything else to finish (`CoreDispatcherPriority::Low`), we let all the tabs and panes actually get created. In the window layer, we're gonna ~cloak~ just not show the window till this event is fired, so we don't actually see this frame until we're actually all ready to go. **This will result in the window seemingly not loading as fast**, but it will actually take exactly the same amount of time before it's usable.
I also experimented with drawing a solid BG color before the initialization is finished. However, there are still a few frames after the frame is displayed before the XAML content first draws, so that didn't actually resolve any issues.
* [x] Closes#11561
* [x] Tested manually
* [x] I work here.
* [x] Accidentally also closes#9053. By switching the initial call from `ShowWindow(SW_SHOW)` to `ShowWindow(SW_SHOWDEFAULT)`, we actually obey the startup info now.
Adds the `selectAll` action which can be used to select all text in the buffer (regardless of whether a selection is present).
## References
#3663 - Mark Mode
#4993 - [Scenario] Keyboard selection
## PR Checklist
* [x] Closes#1469
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
I've made it such that selecting the "entire buffer" really just selects up to the mutable viewport. This seems like a nice QOL improvement since there's generally nothing past that.
When the user selects all, the viewport does not move. This is consistent with CMD behavior and is intended to allow the user to not lose context when selecting everything.
A minor change had to be made to the DxRenderer because this uncovered an underflow issue. Basically, the selection rects were handed to the DxEngine relative to the viewport (which means that some had a negative y-value). At some point, those rects were stored into `size_t`s, resulting in an underflow issue. This caused the renderer to behave strangely when rendering the selection. Generally, these kinds of issues weren't really noticed because selection would always modify a portion of the viewport.
Funny enough, in a way, this satisfies the "mark mode" scenario because the user now has a way to initiate a selection using only the keyboard. Though this isn't ideal, just a fun thing to point out (that's why I'm not closing the mark mode issue).
## Validation Steps Performed
- Verified using DxEngine and AtlasEngine
- select all --> keyboard selection --> start moving the top-left endpoint (and scroll to there)
- select all --> do not scroll automatically
Turns out if you add that Delete handler there, then every time you navigate to the profile, we'll add another Delete handler to the list of handlers. That's bad - that'll cause us to try and delete the profile multiple times.
The repro I had before was 100%, now it's fixed.
* [x] Closes#13017
`TextAttribute` and `TextColor` are commonly used structures in hot paths.
This commit replaces more complex comparisons where each field is compared
independently with a single call to `memcmp`. This compiles down to just
a few instructions. This reduces code and binary size and improves
performance for paths were `TextAttribute`s need to be compared.
## PR Checklist
* [x] Supports #10563
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* termbench still works ✔️
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
## Summary of the Pull Request
As discussed in team sync. Ignore `newTab` actions with a profile index greater than the number of profiles.
## PR Checklist
* [x] Closes#11114
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - maybe❓
In classic fashion, we never run the LocalTests locally before committing, so stuff breaks from time to time.
This time, the main trick was that the tests had a pretty hardcore dependency on the inner workings of `_PreviewActionHandler`, and when that changed, they broke.
Also, there was a weird crash I saw when I had the default terminal set to the Dev build version. That crash would let the test contents pass, but ultimately fail when TAEF tore down the conhost. Unsetting that fixed the crash 🤷Closes#12158
## Summary of the Pull Request
When `TerminalDispatch` was merged with `AdaptDispatch` in PR #13024,
that broke the Terminal's `EraseAll` operation in the alt buffer. The
problem was that the `EraseAll` implementation makes a call to
`SetViewportPosition` which wasn't taking the alt buffer into account,
and thus modified the main viewport instead.
This PR corrects that mistake. If we're in the alt buffer, the
`SetViewportPosition` method now does nothing, since the alt buffer
viewport should always be at 0,0.
## References
This was a regression introduced in PR #13024.
## PR Checklist
* [x] Closes#13038
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #13038
## Validation Steps Performed
I've confirmed that the test case reported in issue #13038 is no longer
failing. I've also made sure the `ED 2` and `ED 3` sequences are still
working correctly in the main buffer.
To quote an internal wiki:
> It generally provides improved footprint and performance over the
> existing default heap for native win32 applications.
It is apparently the default heap on ARM64, and for all UWPs.
This heap has different allocation and compaction characteristics.
I am not sure how it will impact terminal.
## Summary of the Pull Request
Make sure we set `Name` and `FullDescription` on expander-style settings in the SUI
## PR Checklist
* [x] Closes#13019
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Accessibility insights now shows the name/full description for the expander-style settings
## Summary of the Pull Request
This PR replaces the `TerminalDispatch` class with the `AdaptDispatch` class from conhost, so we're no longer duplicating the VT functionality in two places. It also gives us a more complete VT implementation on the Terminal side, so it should work better in pass-through mode.
## References
This is essentially part two of PR #12703.
## PR Checklist
* [x] Closes#3849
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #12662
## Detailed Description of the Pull Request / Additional comments
The first thing was to give the `ConGetSet` interface a new name, since it's now no longer specific to conhost. I went with `ITerminalApi`, since that was the equivalent interface on the terminal side, and it still seemed like a generic enough name. I also changed the way the api is managed by the `AdaptDispatch` class, so it's now stored as a reference rather than a `unique_ptr`, which more closely matches the way the `TerminalDispatch` class worked.
I then had to make sure that `AdaptDispatch` actually included all of the functionality currently in `TerminalDispatch`. That meant copying across the code for bracketed paste mode, the copy to clipboard operation, and the various ConEmu OSC operations. This also required a few new methods to the `ConGetSet`/`ITerminalApi` interface, but for now these are just stubs in conhost.
Then there were a few thing in the api interface that needed cleaning up. The `ReparentWindow` method doesn't belong there, so I've moved that into `PtySignalInputThread` class. And the `WriteInput` method was too low-level for the Terminal requirements, so I've replaced that with a `ReturnResponse` method which takes a `wstring_view`.
It was then a matter of getting the `Terminal` class to implement all the methods in the new `ITerminalApi` interface that it didn't already have. This was mostly mapping to existing functionality, but there are still a number of methods that I've had to leave as stubs for now. However, what we have is still good enough that I could then nuke the `TerminalDispatch` class from the Terminal code and replace it with `AdaptDispatch`.
One oddity that came up in testing, though, was the `AdaptDispatch` implementation of `EraseAll` would push a blank line into the scrollback when called on an empty buffer, whereas the previous terminal implementation did not. That caused problems for the conpty connection, because one of the first things it does on startup is send an `ED 2` sequence. I've now updated the `AdaptDispatch` implementation to match the behavior of the terminal implementation in that regard.
Another problem was that the terminal implementation of the color table commands had special handling for the background color to notify the application window that it needed to repaint the background. I didn't want to have to push the color table operations through the `ITerminalApi` interface, so I've instead moved the handling of the background update into the renderer, initiated by a flag on the `TriggerRefreshAll` method.
## Validation Steps Performed
Surprisingly this PR didn't require a lot of changes to get the unit tests working again. There were just a few methods used from the original `ITerminalApi` that have now been removed, and which needed an equivalent replacement. Also the updated behavior of the `EraseAll` method in conhost resulted in a change to the expected cursor position in one of the screen buffer tests.
In terms of manual testing, I've tried out all the different shells in Windows Terminal to make sure there wasn't anything obviously wrong. And I've run a bunch of the tests from _vttest_ to try and get a wider coverage of the VT functionality, and confirmed everything still works at least as well as it used to. I've also run some of my own tests to verify the operations that had to be copied from `TerminalDispatch` to `AdaptDispatch`.
`InteractivityOneCore` and `RendererWddmCon` were the last two remaining
projects which are relevant for our internal console builds, but couldn't be
easily compiled publicly by users on GitHub. This commit adds all definitions
required to compile the two projects into dysfunctional libraries at least.
(Since the added definitions are deliberately incorrect.)
Additionally this commit fixes the AuditMode build for the two projects.
## Validation Steps Performed
The two new projects compile fine.
As noted in the issue. There's a case where backing up the `lineEnd` can result in the `lineEnd` pointing at exactly the `lineBegin`, which results in an empty view, which causes all sorts of pain later.
Instead, just return early in this case.
* tested with an 80x24 conhost
* tested with an 79x24 conhost
I also tried making this a FAILFAST or a THROW_HR, but the failfast immediately died (of course it did), and the throw would result in a few frames where the composition was just... entirely not displayed? Probably not what we wanted.
* [x] Closes#12730
Modified the scope of input control, it used to be `Text`, now it is
`AlphanumericHalfWidth`. This input scope actually accepts any
characters, but English characters are preferred, and the soft keyboard
also displays English by default.
This should improve user friendliness for users using composition mode
input methods.
As a user who uses the composition mode input method, in applications
like windows terminal that should usually be input in English, it is
always required to manually switch to English mode by pressing Shift
before entering commands.
One keystroke is not a problem, but often for some reason there is no or
no successful switching, and additional more keystrokes are required to
clear the wrong input.
The input method that comes with windows will automatically switch to
English mode for a few programs such as conhost, but windows terminal is
not in this list.
This change should have no negative impact. Even if someone does tend to
use a shell oriented towards composition characters or non-alpha
letters, there should also were more users who in the same language are
more inclined to English characters shells, for example, cmd,
powershell, bash that comes with windows.
If there's any reason to have to keep the Text inputScope, maybe making
this setting customizable via `settings.json` would be a good idea, but
I don't see the need to do this, `AlphanumericHalfWidth` is perfect.
Closes#12731
`_api.cellCount` caches the `TextBuffer` size in AtlasEngine.
Calculating it based on the `_api.sizeInPixel` is incorrect as the
`TextBuffer` size doesn't necessarily have to be the size of the window.
This can occur when the window is resized, as the main thread is receiving its
`WM_SIZE` message and resizing the `TextBuffer` concurrently with the render
thread performing a render pass and AtlasEngine checking the `GetClientRect`.
In order to inform `AtlasEngine` about the initial buffer size, `Renderer`
was modified to also invoke `UpdateViewport()` on the first render cycle.
The only other user of `UpdateViewport()` is `VtEngine` which used to call
`InvalidateAll()` in these situations. In order to prevent the `InvalidateAll()`
call, `VtEngine::UpdateViewport()` was modified to suppress this.
## Validation Steps Performed
* Resizing wide characters doesn't crash the terminal anymore ✅
* The additional call to `UpdateViewport()` doesn't break VtEngine ✅
There are 3 en-dashes`(U+2013)` in the file when they should be hyphen `(U+002D)`.
This character causes the file to fail to compile in a non-utf8 encoding environment.
Just modified 3 characters to make it fall within the scope of ascii and keep it consistent with other files of the project.
The "virtual bottom" marks the last line of the mutable viewport area,
which is the part of the buffer that VT sequences can write to. This
region should typically only move downwards as new lines are added to
the buffer, but there were a number of cases where it was incorrectly
being moved up, or moved down further than necessary. This PR attempts
to fix that.
There was an earlier, unsuccessful attempt to fix this in PR #9770 which
was later reverted (issue #9872 was the reason it had to be reverted).
PRs #2666, #2705, and #5317 were fixes for related virtual viewport
problems, some of which have either been extended or superseded by this
PR.
`SetConsoleCursorPositionImpl` is one of the cases that actually does
need to move the virtual viewport upwards sometimes, in particular when
the cmd shell resets the buffer with a `CLS` command. But when this
operation "snaps" the viewport to the location of the cursor, it needs
to use the virtual viewport as the frame of reference. This was
partially addressed by PR #2705, but that only applied in
terminal-scrolling mode, so I've now applied that fix regardless of the
mode.
`SetViewportOrigin` takes a flag which determines whether it will also
move the virtual bottom to match the visible viewport. In some case this
is appropriate (`SetConsoleCursorPositionImpl` being one example), but
in other cases (e.g. when panning the viewport downwards in the
`AdjustCursorPosition` function), it should only be allowed to move
downwards. We can't just not set the update flag in those cases, because
that also determines whether or not the viewport would be clamped, and
we don't want change that. So what I've done is limit
`SetViewportOrigin` to only move the virtual bottom downwards, and added
an explicit `UpdateBottom` call in those places that may also require
upward movement.
`ResizeWindow` in the `ConhostInternalGetSet` class has a similar
problem to `SetConsoleCursorPositionImpl`, in that it's updating the
viewport to account for the new size, but if that visible viewport is
scrolled back or forward, it would end up placing the virtual viewport
in the wrong place. So again the solution here was to use the virtual
viewport as the frame of reference for the position. However, if the
viewport is being shrunk, this can still result in the cursor falling
below the bottom, so we need an additional check to adjust for that.
This can't be applied in pty mode, though, because that would break the
conpty resizing operation.
`_InternalSetViewportSize` comes into play when resizing the window
manually, and again the viewport after the resize can end up truncating
the virtual bottom if not handled correctly. This was partially
addressed in the original code by clamping the new viewport above the
virtual bottom under certain conditions, and only in terminal scrolling
mode. I've replaced that with a new algorithm which links the virtual
bottom to the visible viewport bottom if the two intersect, but
otherwise leaves it unchanged. This applies regardless of the scrolling
mode.
`ResizeWithReflow` is another sizing operation that can affect the
virtual bottom. This occurs when a change of the window width requires
the buffer to be reflowed, and we need to reposition the viewport in the
newly generated buffer. Previously we were just setting the virtual
bottom to align with the new visible viewport, but that could easily
result in the buffer truncation if the visible viewport was scrolled
back at the time. We now set the virtual bottom to the last non-space
row, or the cursor row (whichever is larger). There'll be edge cases
where this is probably not ideal, but it should still work reasonably
well.
`MakeCursorVisible` was another case where the virtual bottom was being
updated (when requested with a flag) via a `SetViewportOrigin` call.
When I checked all the places it was used, though, none of them actually
required that behavior, and doing so could result in the virtual bottom
being incorrectly positioned, even after `SetViewportOrigin` was limited
to moving the virtual bottom downwards. So I've now made it so that
`MakeCursorVisible` never updates the virtual bottom.
`SelectAll` in the `Selection` class was a similar case. It was calling
`SetViewportOrigin` with the `updateBottom` flag set when that really
wasn't necessary and could result in the virtual bottom being
incorrectly set. I've changed the flag to false now.
## Validation Steps Performed
I've manually confirmed that the test cases in issue #9754 are working
now, except for the one involving margins, which is bigger problem with
`AdjustCursorPosition` which will need to be addressed separately.
I've also double checked the test cases from several other virtual
bottom issues (#1206, #1222, #5302, and #9872), and confirmed that
they're still working correctly with these changes.
And I've added a few screen buffer tests in which I've tried to cover as
many of the problematic code paths as possible.
Closes#9754
## Summary of the Pull Request
Ensures the tab close button color matches the text color.
## PR Checklist
* [x] Closes#13010
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
Also re-ordered and aligned the properties cleared in the `_ClearTabBackgroundColor()` method to match `_ApplyTabColor()`.
## Validation Steps Performed
Manually tested
This pull request introduces a packaging phase that emits
Microsoft.Windows.Console.ConPTY, a nuget package that contains the
pseudoconsole API as well as the requisite copies of conhost.
* winconpty learned to load a version of OpenConsole.exe specific to the
processor architecture on its hosting machine
* the package, as well as its contents, is signed properly and is nearly
ready for distribution via nuget.org
* the API in conpty-static.h has been adjusted to expose
CreatePseudoConsoleAsUser and stamp out the correct DLL import/export
annotations.
* getting .NET to play right was somewhat challenging, but I tested this
against .NET 6.0 and it seemed to work properly; it shipped conpty.dll
in the right places, and it shipped OpenConsole.exe next to the
published application.
In the future, we could provide an interop assembly for C# consumers;
that is, unfortunately, out of scope today.
Closes#3577Closes#3568
Obsoletes #1130
Propagate show/hide window calls against the ConPTY pseudo window to the Terminal
## PR Checklist
* [x] Closes#12570
* [x] I work here
* [x] Manual Tests passed
* [x] Spec Link: →[Doc Link](https://github.com/microsoft/terminal/blob/dev/miniksa/msgs/doc/specs/%2312570%20-%20Show%20Hide%20operations%20on%20GetConsoleWindow%20via%20PTY.md)←
## Detailed Description of the Pull Request / Additional comments
- See the spec. It's pretty much everything I went through deciding on this.
## Validation Steps Performed
- [x] Manual validation against scratch application calling all of the `::ShowWindow` commands against the pseudo console "fake window" and observing the real terminal window state
If we are building a branch called "release-*", we will also change the
NuGet suffix to "preview". If we don't do that, XES will set the suffix
to "release1" because it truncates the value after the first period. In
general, though, we want to disable the suffix entirely if we're Release
branded while on a release branch.
In effect:
BRANCH / BRANDING | Release | Preview
------------------|------------------------|------------------------
release-* | 1.12.20220427 | 1.13.20220427-preview
all others | 1.14.20220427-mybranch | 1.14.20220427-mybranch
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes#6028
Setting is "experimental.useBackgroundImageForWindow"
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
https://github.com/microsoft/terminal/issues/6028
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#6028
* [X] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated. I read CONTRIBUTING.md, but I'm not sure if a spec is needed for an experimental feature such as this one.
* [ ] Schema updated. I added a JSON key, not sure where I need to update it.
* [X] I've discussed this with core contributors already. Somewhat discussed in https://github.com/microsoft/terminal/issues/6028
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here
## Detailed Description of the Pull Request / Additional comments -->
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Set ` "experimental.useBackgroundImageForWindow": true` and a bg image for one profile, then make splits and tabs and make sure the bg updates accordingly:
I also did the same with the setting off to make sure it still works correctly and didn't break. And I made sure opening the settings tab does not crash or show the bg image.
#4015 requires sweeping changes in order to allow a migration of our buffer
coordinates from `int16_t` to `int32_t`. This commit reduces the size of
future commits by using type inference wherever possible, dropping the
need to manually adjust types throughout the project later.
As an added bonus this commit standardizes the alignment of cv qualifiers
to be always left of the type (e.g. `const T&` instead of `T const&`).
The migration to type inference with `auto` was mostly done
using JetBrains Resharper with some manual intervention and the
standardization of cv qualifier alignment using clang-format 14.
## References
This is preparation work for #4015.
## Validation Steps Performed
* Tests pass ✅
Fixed various small issues:
* Made TabView bottom border span the entire window width
* Made ScrollBar inner thumb rounded again
* Made SplitButton look more like the new add tab button
* Adjusted rename box height (24px, like the official compact sizing height)
* Adjusted caption button colors to match Windows 11
* ColorPicker can now escape window bounds
* Tweaked ColorPicker buttons
Further builds on #12799. #12799 assumes that the connection is prepared to receive FocusIn/FocusOut events as input. For ConPTY we can be relatively sure of that, but that's not _technically_ correct. In the hypothetical world where the connection is not a ConPTY connection, then the other side might not be expecting those sequences.
This remedies the issue by
* ConPTY will always request focus event mode (from the terminal) when it starts up
* when a client tries to disable focus events in conpty, conpty is gonna note that internally, but never transmit that to the hosting terminal, to leave the terminal in focus event mode.
* `TerminalDispatch` and `ControlCore` are hooked up now to only send focus events when the Terminal is in focus event mode (which will be always for conpty)
* At this point, it was like, 4LOC in `terminalInput.cpp` to add support for focus events to conhost as well.
## checklist
* [x] closes#11682
* This combined with #12515 will finally close out #2988 as well, but we can do that manually.
* [x] I work here
* [ ] There aren't tests for this. There probably should be.
This commit replaces our use of `size_t` to represent VT parameters with
`int32_t`. While unsigned integers have the inherent benefit of being less
ambiguous and enjoying two's complement, our buffer coordinates use signed
integers. Since a number of VT functions need to convert their parameters
to coordinates, this commit makes the conversion easier.
The benefit of this change becomes even more apparent if one considers
that a number of places performed unsafe conversions
of their size_t parameters to int or short already.
Files that had to be modified were converted to use til
wrappers instead of COORD or SMALL_RECT wherever possible.
## References
This commit contains about 20% of the work for #4015.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
I'm mostly relying on our unit tests here. Both OpenConsole and WT appear to work fine.
#### ⚠️ _Targets #12799_ ⚠️
This is an atomic bit of code that partners with #12799. It's separated as an individual PR to keep diffs more simple.
This ensures that when a terminal tells ConPTY that it's focused, that ConPTY doesn't do the `ConsoleControl(CONSOLE_FOREGROUND` thing unless the terminal application is actually in the foreground. This prevents a trivial exploit whereby a `malicious.exe` could create a PTY, tell ConPTY it has focus (when it doesn't), then use this mechanism to launch an instance of itself into the foreground.
When the terminal tells us it's in the foreground, we're gonna look at the owner of the ConPTY window handle. If that owner has focus, then cool, this is allowed. Otherwise, we won't grant them the FG right. For this to work, the terminal just have already called `ReparentPseudoConsole`.
* built on top of #12799 and #12526
* [x] Part of #2988
* [x] Tested manually.
## Window shenanigans, part the third:
Hooks the Terminal's focus state up to the underlying ConPTY. This is LOAD BEARING for allowing windows created by console applications to bring themselves to the foreground.
We're using the [FocusIn/FocusOut](https://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h3-FocusIn_FocusOut) sequences to communicate to ConPTY when a control gains/loses focus. Theoretically, other terminals could do this as well.
## References
#11682 tracks _real_ support for this sequence in Console & conpty. When we do that, we should consider even if a client application disables this mode, the Terminal & conpty should always request this from the hosting terminal (and just ignore internally to ConPTY).
See also #12515, #12526, which are the other two parts of this effort. This was tested with all three merged together, and they worked beautifully for all our scenarios. They are kept separate for ease of review.
## PR Checklist
* [x] This is prototype 3 for #2988
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This allows windows spawned by console processes to bring themselves to the foreground _when the console is focused_. (Historically, this is also called in the WndProc, when focus changes).
Notably, before this, ConPTY was _never_ focused, so windows could never bring themselves to the foreground when run from a ConPTY console. We're not blanket granting the SetForeground right to all console apps when run in ConPTY. It's the responsibility of the hosting terminal emulator to always tell ConPTY when a particular instance is focused.
## Validation Steps Performed
(gif below)
This will result in the deletion of the following directories from the OS tree, under `onecore/windows/core/console/open`:
* doc/
* src/tools/MonarchPeasantPackage/
* src/api-ms-win-core-synch-l1-2-0/
* src/tools/ansi-color/
* src/tools/ColorTool/
We have gotten some PoliCheck flags on `doc/` (thanks to Niksa.md), but also the OS build just doesn't need these folders 😄
(cherry picked from commit 27b63ad02a)
Service-Card-Id: 80783789
Service-Version: Inbox
This will result in the deletion of the following directories from the OS tree, under `onecore/windows/core/console/open`:
* doc/
* src/tools/MonarchPeasantPackage/
* src/api-ms-win-core-synch-l1-2-0/
* src/tools/ansi-color/
* src/tools/ColorTool/
We have gotten some PoliCheck flags on `doc/` (thanks to Niksa.md), but also the OS build just doesn't need these folders 😄
#12149 introduced a bug where `ClearCommandline()` is called on any user
profile containing the non-canonical strings "cmd.exe" or "powershell.exe"
in the "commandline" field. If you happen to have set the "commandline"
field in your `profiles.defaults`, this will cause these user profiles
to adopt the base layer command-line instead of the defaults layer one.
This commit fixes the issue, by checking the command-line after the call
to `ClearCommandline()` and ensuring it's the expected string.
Additionally this moves the migration logic to `SettingsLoader` as this allows
us to write the fixed settings to disk, if any fixed had to be applied.
## PR Checklist
* [x] Closes#12842
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* The modified unit test fails without these changes ✅
* The modified unit test succeeds with these changes ✅
* Setting `profiles.defaults.commandline` to "pwsh.exe" and setting
my "...\\powershell.exe" profile to use just "powershell.exe" as
the `commandline`, doesn't cause it to use "pwsh.exe" ✅
The fixed settings are written to settings.json ✅
This is exactly the same as #12855, save for one small difference:
```diff
diff --git a/build/pipelines/ci.yml b/build/pipelines/ci.yml
index e4e53e9b2..dc9040aeb 100644
--- a/build/pipelines/ci.yml
+++ b/build/pipelines/ci.yml
@@ -99,7 +99,6 @@ stages:
- stage: CodeIndexer
displayName: Github CodeNav Indexer
dependsOn: [Build_x64]
- condition: succeeded()
+ condition: and(succeeded(), not(eq(variables['Build.Reason'], 'PullRequest')))
jobs:
- template: ./templates/codenav-indexer.yml
- condition: not(eq(variables['Build.Reason'], 'PullRequest'))
```
Because the first ones failed with an error about a duplicate condition
And that hosed the whole CI
VTE only rewraps the contents of the (normal screen + its scrollback
buffer) on a resize event. It doesn't rewrap the contents of the
alternate screen. The alternate screen is used by applications which
repaint it after a resize event. So, it doesn't really matter. However,
in that short time window, after resizing the terminal but before the
application catches up, this prevents vertical lines
It was really hard to get a gif of this where it happened and was small
enough to upload to GH, but there is one in #12719.
There's something in this branch that fixes a scrolling issue in the
parent PR. I'm partially filing this so I can look at the diffs here and
try and figure out what that is. I kinda want to just take all 3 alt
buffer PRs as a single atomic unit, but splitting them up made sense
from a review standpoint.
Closes#3493
The original research for a solution all the way back in #11032 contained an
unfortunate flaw. The nearby font loading code was written under the assumption
that Cascadia is missing in the system font collection, leading to our issues.
Adding nearby fonts last into the collection would thus ensure that we use
the system fonts whenever possible, but only have nearby fonts as a fallback.
This didn't work and we figured that we'd have to always prefer loading nearby
fonts over system fonts. #12554 tried to achieve this, but failed to change
the order in which the font set is built. In order to prefer nearby fonts
over system ones, we have to add the system font collection last.
## PR Checklist
* [x] Closes#11648
* [x] I work here
* [x] Tests added/passed
* [x] Embarrassment for my incompetence
## Validation Steps Performed
* Put Jetbrains Mono into the AppX directory of the Debug build
* Jetbrains Mono shows up in the font selector and is useable
Additionally a more complex mini-test was built:
Using FontForge I've cloned arial.ttf and removed all characters except for
the letter "0". Afterwards I've build a custom font collection the same way
we do it in Terminal, extracted a `FontFace` named "Arial" and called
`IDWriteFont::HasCharacter` for the letter "1".
Loading the system font collection first results in `TRUE` and loading it last
results in `FALSE` (since my custom arial.ttf doesn't have the letter "1").
This confirms that we need to load the system font collection last.
We discussed this with the GitHub folks. It's pretty cool.
(Rich code nav) brings editor-level navigation capabilities into
GitHub.com for C++ and C# repos
If you want to try it out, you can go to github.dev for this repo.
If you haven't used github.dev before there are two steps to get setup:
1. In the settings file you'll need to enable Rich Code Nav. If you just
search for "rich", there'll be a checkbox to enable it.
2. Refresh the page and you should see a stacked papers icon in the task
bar at the bottom. Click on that and select "Latest Index". Then one
more refresh and you should be good to go with navigation in both C#
and C++ files!
This is an attempt to simplify the `ConGetSet` interface down to the
smallest set of methods necessary to support the `AdaptDispatch` class.
The idea is that it should then be easier to implement that interface in
Windows Terminal, so we can replace the `TerminalDispatch` class with
`AdaptDispatch`.
This is a continuation of the refactoring started in #12247, and a
significant step towards #3849.
## Detailed Description of the Pull Request / Additional comments
The general idea was to give the `AdaptDispatch` class direct access to
the high-level structures on which it needs to operate. Some of these
structures are now passed in when the class is constructed (the
`Renderer`, `RenderSettings`, and `TerminalInput`), and some are exposed
as new methods in `ConGetSet` (`GetStateMachine`, `GetTextBuffer`, and
`GetViewport`).
Many of the existing `ConhostInternalGetSet` methods could easily then
be reimplemented in `AdaptDispatch`, since they were often simply
forwarding to methods in one of the above structures. Some were a little
more complicated, though, and require further explanation.
* `GetConsoleScreenBufferInfoEx`: What we were typically using this for
was to obtain the viewport, although what we really wanted was the
virtual viewport, which is now accessible via the `GetViewport`
method. This was also used to obtain the cursor position and buffer
width, which we can now get via the `GetTextBuffer` method.
* `SetConsoleScreenBufferInfoEx`: This was only really used for the
`AdaptDispatch::SetColumns` implementation (for `DECCOLM` mode), and
that could be replaced with `ResizeWindow`. This is a slight change in
behaviour (it sizes the window rather than the buffer), but neither is
technically correct for `DECCOLM`, so I think it's good enough for
now, and at least it's consistent with the other VT sizing operations.
* `SetCursorPosition`: This could mostly be replaced with direct
manipulation of the `Cursor` object (accessible via the text buffer),
although again this is a slight change in behavior. The original code
would also have made a call to `ConsoleImeResizeCompStrView` (which I
don't think is applicable to VT movement), and would potentially have
moved the viewport (not essential for now, but could later be
supported by `DECHCCM`). It also called `VtIo::SetCursorPosition` to
handle cursor inheritance, but that should only apply to
`InteractDispatch`, so I've moved that to the
`InteractDispatch::MoveCursor` method.
* `ScrollRegion`: This has been replaced by two simple helper methods in
`AdaptDispatch` which better meet the VT requirements -
`_ScrollRectVertically` and `_ScrollRectHorizontally`. Unlike the
original `ScrollRegion` implementation, these don't generate
`EVENT_CONSOLE_UPDATE_SCROLL` events (see #12656 for more details).
* `FillRegion`: This has been replaced by the `_FillRect` helper method
in `AdaptDispatch`. It differs from the original `FillRegion` in that
it takes a rect rather than a start position and length, which gives
us more flexibility for future operations.
* `ReverseLineFeed`: This has been replaced with a somewhat refactored
reimplementation in `AdaptDispatch`, mostly using the
`_ScrollRectVertically` helper described above.
* `EraseAll`: This was previously handled by
`SCREEN_INFORMATION::VtEraseAll`, but has now been entirely
reimplemented in the `AdaptDispatch::_EraseAll` method.
* `DeleteLines`/`InsertLines`/`_modifyLines`: These have been replaced
by the `_InsertDeleteLineHelper` method in `AdaptDispatch`, which
mostly relies on the `_ScrollRectVertically` helper described above.
Finally there were a few methods that weren't actually needed in the
`ConGetSet` interface:
* `MoveToBottom`: This was really just a hack to get the virtual
viewport from `GetConsoleScreenBufferInfoEx`. We may still want
something like in the future (e.g. to support `DECVCCM` or #8879), but
I don't think it's essential for now.
* `SuppressResizeRepaint`: This was only needed in `InteractDispatch`
and `PtySignalInputThread`, and they could easily access the `VtIo`
object to implement it themselves.
* `ClearBuffer`: This was only used in `PtySignalInputThread`, and that
could easily access the buffer directly via the global console
information.
* `WriteControlInput`: This was only used in `InteractDispatch`, and
that could easily be replaced with a direct call to
`HandleGenericKeyEvent`.
As part of these changes, I've also refactored some of the existing
`AdaptDispatch` code:
* `_InsertDeleteHelper` (renamed `_InsertDeleteCharacterHelper`) is now
just a straightforward call to the new `_ScrollRectHorizontally`
helper.
* `EraseInDisplay` and `EraseInLine` have been implemented as a series
of `_FillRect` calls, so `_EraseSingleLineHelper` is no longer
required.
* `_EraseScrollback` is a essentially a special form of scrolling
operation, which mostly depends on the `TextBuffer::ScrollRows`
method, and with the filling now provided by the new `_FillRect`
helper.
* There are quite a few operations now in `AdaptDispatch` that are
affected by the scrolling margins, so I've pulled out the common
margin setup into a new `_GetVerticalMargins` helper method. This also
fixes some edge cases where margins could end up out of range.
## Validation Steps Performed
There were a number of unit tests that needed to be updated to work
around functions that have now been removed, but these substitutions
were fairly straightforward for the most part.
The adapter tests were a different story, though. In that case we were
explicitly testing how operations were passed through to the `ConGetSet`
interface, but with more than half those methods now gone, a significant
rewrite was required.
I've tried to retain the crux of the original tests, but we now have to
validate the state changes on the underlying data structures, where
before that state would have been tracked in the `TestGetSet` mock. And
in some cases we were testing what happened when a method failed, but
since that scenario is no longer possible, I've simply removed those
tests.
I've also tried to manually test all the affected operations to confirm
that they're still working as expected, both in vttest as well as my own
test scripts.
Closes#12662
"Alternate scroll mode" is a neat little mode where the app wants mouse wheel events to come through as arrow keypresses instead, when in the alternate buffer. Now that we've got support for the alt buffer in the Terminal, we can support this as well.
* [x] Closes https://github.com/microsoft/terminal/issues/3321
* [x] I work here
* [ ] Tests would be nice
Tested manually with
```bash
printf "\e[?1007h" ; man ps
```
## Window shenanigans, part the first:
This PR enables terminals to tell ConPTY what the owning window for the
pseudo window should be. This allows thigs like MessageBoxes created by
console applications to work. It also enables console apps to use
`GetAncestor(GetConsoleWindow(), GA_ROOT)` to get directly at the HWND
of the Terminal (but _don't please_).
This is tested with our internal partners and seems to work for their
scenario.
See #2988, #12799, #12515, #12570.
## PR Checklist
This is 1/3 of #2988.
This PR allows the Terminal to actually use the alt buffer
appropriately. Currently, we just render the alt buffer state into the
main buffer and that is wild. It means things like `vim` will let the
user scroll up to see the previous history (which it shouldn't).
Very first thing this PR does: updates the
`{Trigger|Invalidate}Circling` methods to instead be
`{Trigger|Invalidate}Flush(bool circling)`. We need this so that when an
app requests the alt buffer in conpty, we can immediately flush the
frame before asking the Terminal side to switch to the other buffer. The
`Circling` methods was a great place to do this, but we don't actually
want to set the circled flag in VtRenderer when that happens just for a
flush.
The Terminal's implementation is a little different than conhost's.
Conhost's implementation grew organically, so I had it straight up
create an entire new screen buffer for the alt buffer. The Terminal
doesn't need all that! All we need to do is have a separate `TextBuffer`
for the alt buffer contents. This makes other parts easier as well - we
don't really need to do anything with the `_mutableViewport` in the alt
buffer, because it's always in the same place. So, we can just leave it
alone and when we come back to the main buffer, there it is. Helper
methods have been updated to account for this.
* [x] Closes#381
* [x] Closes#3492
* #3686, #3082, #3321, #3493 are all good follow-ups here.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Specs for feature request "Theme-controlled color scheme switch".
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4066
This is all of course, conjecture. This crash is totally wild and makes no sense at all. But, we're hoping that this fixes it. This should also make calls to the Monarch a little easier.
You may be asking yourself - why aren't I doing this for the Peasant too? Well, because the Peasant simply doesn't crash like the monarch does. I'm not gonna touch something that's not broken _during ask mode_.
References #12774. We can close the bug if it is verified fixed.
855e136 contains a regression which breaks buffer reflow if wide surrogate
characters are present. This happens because we made use of the
`TextBufferCellIterator` whose increment operator skips 2 cells for wide
characters. This created a "misalignment" in the reflow logic which was written
for cell-wise iteration. This commit fixes the issue, by reverting back to the
previous algorithm without iterators.
Closes#12837
Closes MSFT-38904421
## Validation Steps Performed
* Run ``pwsh -noprofile -command echo "`u{D83D}`u{DE43}"``
* Resizing conhost preserves all contents ✅
* Resizing Windows Terminal doesn't crash it ✅
* Added a test covering this issue ✅
(cherry picked from commit 10b9044120)
Service-Card-Id: 80340091
Service-Version: Inbox
855e136 contains a regression which breaks buffer reflow if wide surrogate
characters are present. This happens because we made use of the
`TextBufferCellIterator` whose increment operator skips 2 cells for wide
characters. This created a "misalignment" in the reflow logic which was written
for cell-wise iteration. This commit fixes the issue, by reverting back to the
previous algorithm without iterators.
Closes#12837
Closes MSFT-38904421
## Validation Steps Performed
* Run ``pwsh -noprofile -command echo "`u{D83D}`u{DE43}"``
* Resizing conhost preserves all contents ✅
* Resizing Windows Terminal doesn't crash it ✅
* Added a test covering this issue ✅
If we delete a scheme, and the next scheme we've loaded is an inbox one
that _can't_ be deleted, then we need to toss focus to something
sensible, rather than letting it fall out to the tab item.
When deleting a scheme and the next scheme _is_ deletable, this isn't an
issue, we'll already correctly focus the Delete button.
125e9c4790 focused the SelectionBackground
button, which is the _previous_ focusable control, rather than the
following one.
However, it seems even more useful for focus to ALWAYS land on the
scheme dropdown box. This forces Narrator to read the name of the newly
selected color scheme, which seemed more useful.
I'm waiting on feedback from a11y team to see if this solution is
acceptable.
* [x] Is for #11971
After switching to ControlsV2, it seems that
delay-loading a dialog causes the ContentDialog to be assigned a
Height equal to it's content size. If we DON'T assign the
ContentDialog a Row, I believe it's assigned Row 0 by default. So,
when the dialog gets opened, the dialog seemingly causes a giant
hole to appear in the body of the app.
Assigning all the dialogs to Row 2 (where the rest of the content
is) makes the "hole" appear in the same space as the rest of the
TabContent, fixing the issue.
Note that the actual content in a content dialog gets parented to
the PopupRoot, so it actually always appeared in the correct place, it's
just this weird hole that appeared in Row 0.
* [x] Closes#12775
* See also:
* #12202 was fixed by #12208
* #12447 was fixed by #12517
* [x] Tested manually
* [x] Reverts #12625
* [x] Reverts #12517
You'd think that if a key wasn't present in a ThemeDictionary, it'd fall back to the original value. You'd be wrong - if you provide a Light&dark version of a resource, but not the HighContrast version, the resource loader will fall back to the _Light_ value. Of course.
Before (left top), after (right bottom)
Closes MSFT:38264744
This is like, 2-4% of our crashes. Impossible to say for sure, but this _looks_ like it's the root cause. This is just another one of our `HandleCommandlineArgs` buckets, hopefully the last.
* [x] Hopefully should close out MSFT:38542548
* [ ] No I didn't write tests, impossible to test
* [x] it builds
Replaces all the `RadioButton` expanders with `ComboBox`es, which can have the options inline, as opposed to in the expander content. For example, here's a single commit with the changes for a single one of these settings: 745c77d03e
### Checklist
* [x] Closes#12648
* [x] Actually closes#9566 as well (by just removing all radio buttons)
* [x] I work here
* [x] Tested manually
* [x] I'd love @carlos-zamora to have an a11y pass at this, just to see if it's egregious or not.
### Before, after:
This commit fixes some formatting bugs by upgrading clang-format and ensures
that our code is again formatted the same way Visual Studio 2022 would do it.
This is a crazy idea Dustin and I had.
> we can't repro this at will. But we kinda have an idea of where the deref is. We don't know if the small patch (throw, and try again) will fix it. We're sure that the "just fall back to an isolated monarch" will work. I'd almost rather take a build testing the small patch first, to see if that works
> This might seem crazy
> in 1.12, isolated monarch. In 1.13, "small patch". In 1.14, we can wait and see
I can write more details in the morning. It's 5pm here so if we want this today, here it is.
@dhowett double check my velocity flag logic here. Should be always true for Release, and off for Dev, Preview.
* [x] closes#12774
On certain builds of Windows, when Terminal is set as the default it
will accumulate an unbounded amount of queued animations while the
screen is off and it is servicing window management for console
applications.
This results in Terminal hanging when left overnight, as it has millions
of animations to process.
The new call into TerminalThemeHelpers will tell our compositor to
automatically complete animations that are scheduled while the screen is
off.
Fixes MSFT-38506980
Before #12691, the msixbundle version was of the format YYYY.MM.DD.0.
After #12691, it became the same as the build of Terminal it contained.
This caused some trouble for _some_ systems: major version 1 is much,
much smaller than 2022.
Adding 3000 to the major version component, _only for the bundle_, gets
around this. Ugh.
Fixes#12816.
Adds the common nuget import to the Fuzz project so that it compiles.
## References
Broken in #12778, Issue identified by #12796
## Validation Steps Performed
`Host.FuzzWrapper` project builds.
## Summary of the Pull Request
Prevents the Fuzz pipeline from failing by refactoring the nuget restore pipeline steps.
## References
Broken in #12778.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
Does what it says on the tin. This is maximal BODGE.
`TeachingTip` doesn't provide an `Opened` event.
(https://github.com/microsoft/microsoft-ui-xaml/issues/1607). But we
want to focus the renamer text box when it's opened. We can't do that
immediately, the TextBox technically isn't in the visual tree yet. We
have to wait for it to get added some time after we call IsOpen. How do
we do that reliably? Usually, for this kind of thing, we'd just use a
one-off LayoutUpdated event, as a notification that the TextBox was
added to the tree. HOWEVER:
* The _first_ time this is fired, when the box is _first_ opened,
yeeting focus doesn't work on the first LayoutUpdated. It does work on
the second LayoutUpdated. Okay, so we'll wait for two LayoutUpdated
events, and focus on the second.
* On subsequent opens: We only ever get a single LayoutUpdated. Period.
But, you can successfully focus it on that LayoutUpdated.
So, we'll keep track of how many LayoutUpdated's we've _ever_ gotten. If
we've had at least 2, then we can focus the text box.
We're also not using a ContentDialog for this, because in Xaml Islands a
text box in a ContentDialog won't receive _any_ keypresses. Fun!
## References
* microsoft/microsoft-ui-xaml#1607
* microsoft/microsoft-ui-xaml#6910
* microsoft/microsoft-ui-xaml#3257
* microsoft/terminal#9662
## PR Checklist
* [x] Will close out #12021, but that's an a11y bug that needs secondary
validation
* [x] Closes#11322
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested manually
Make a VTApiRoutines servicer that does minimal translations instead of
environmental simulation for some output methods. Remaining methods are
backed on the existing console host infrastructure (primarily input
related methods).
## PR Checklist
* [x] I work here
* [x] It's Fix-Hack-Learn quality so it's behind a feature gate so we
can keep refining it. But it's a start!
To turn this on, you will have to be in the Dev or Preview rings
(feature staged). Then add `experimental.connection.passthroughMode:
true` to a profile and on the next launch, the flags will propagate down
through the `ConptyConnection` into the underlying `Openconsole.exe`
startup and tell it to use the passthrough mode instead of the full
simulation mode.
## Validation Steps Performed
- Played with it manually in CMD.exe, it seems to work mostly.
- Played with it manually in Ubuntu WSL, it seems to work.
- Played with it manually in Powershell and it's mostly sad. It'll get
there.
Starts #1173
This script takes pull requests from a project board, cherry-picks them,
and updates the project board. It also yells at you if there are
conflicts to resolve, and generally tries to keep track of everything.
It is quite cool.
The `cascadia/` directory straight up isn't checked into the OS. So adding a test dependency on code in there was a BAD IDEA.
(cherry picked from commit 4e61be9cd7)
Service-Card-Id: 79863821
Service-Version: Inbox
If we do not include mp:PhoneIdentity in our AppxManifest, the store
will edit our package and re-sign it for distribution. When that
happens, it creates a divergence: there are now two versions of our
package with the same name and version number, but different contents.
This breaks everything.
**THIS IS LOAD BEARING**
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This builds on top of #12707. As I understand it the primary motivation for using a git submodule instead of NuGet is just that it is too annoying to have to manage dozens of packages.config files and their corresponding import statements. Now that there is a single global nuget definition that is a nonissue and we can switch over.
This also updates to the latest version of WIL.
Now that the latest version of WIL is available it uses it to replace `winrt::resume_foreground` with `wil::resume_foreground`. See [492c01bb53) for a detailed explanation of the problems with `winrt::resume_foreground` and how WIL addresses them.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#12776, Closes#12777
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Ran `git clean -fdx` to wipe my clone to be completely clean. Opened the solution in Visual Studio 2022 and build it. Used `razzle.cmd`, `b`, and `runut.cmd` to run the tests.
## THE WHITE WHALE
This is a fairly naive fix for this bug. It's not terribly performant,
but neither is resize in the first place.
When the buffer gets resized, typically we only copy the text up to the
`MeasureRight` point, the last printable char in the row. Then we'd just
use the last char's attributes to fill the remainder of the row.
Instead, this PR changes how reflow behaves when it gets to the end of
the row. After we finish copying text, then manually walk through the
attributes at the end of the row, and copy them over. This ensures that
cells that just have a colored space in them get copied into the new
buffer as well, and we don't just blat the last character's attributes
into the rest of the row. We'll do a similar thing once we get to the
last printable char in the buffer, copying the remaining attributes.
This could DEFINITELY be more performant. I think this current
implementation walks the attrs _on every cell_, then appends the new
attrs to the new ATTR_ROW. That could be optimized by just using the
actual iterator. The copy after the last printable char bit is also
especially bad in this regard. That could likely be a blind copy - I
just wanted to get this into the world.
Finally, we now copy the final attributes to the correct buffer: the new
one. We used to copy them to the _old_ buffer, which we were about to
destroy.
## Validation
I'll add more gifs in the morning, not enough time to finish spinning a
release Terminal build with this tonight.
Closes#32🎉🎉🎉🎉🎉🎉🎉🎉🎉Closes#12567
(cherry picked from commit 855e1360c0)
These changes are purely a refactoring of the build files. There should
be no difference to the compiled result or runtime behavior.
Currently there are packages.config files in lots of directories, with
those same projects referencing props/targets from packages/ with a
version string in the path. This is frustrating because version changes
or new dependencies require updating lots and lots of build files
identically. There is also the possibility of error where locations are
missed.
With these changes there is a single canonical nuget configuration that
takes effect for all of OpenConsole.sln. Updating version numbers
should be limited to a single set of global files.
The changes were done incrementally but the result is basically that
dep\nuget\packages.config serves as the global NuGet dependency list. A
pair of common build files (common.nugetversions.props and
common.nugetversions.targets) were added to contain the various imports
and error checks. There is also a special build target to ensure that
the restore happens before builds even though a given directory doesn't
have a packages.config for Visual Studio to observe.
These new *.nugetversions.* files are imported in pretty much every
vcxproj/csproj in the solution in the appropriate place to satisfy the
need for packages. There are opt-in configuration values (e.g.
`TerminalCppWinrt=true`) that must be set to opt into a given
dependency. Adding a new dependency is just a matter of adding a new
opt-in value. The ordering of include does matter, which was a
difficult challenge to realize and address.
There was also a preexisting issue in 3 test projects where
cppwinrt.props was included but not cppwinrt.targets. By consolidating
things globally that "error" was fixed, but broke the build in a way
that was very confusing. Those projects don't need the cppwinrt targets
so they were opted out of the cppwinrt build files entirely to fix the
breaks and get back to previous behavior.
There are two notable exceptions to this canonical versioning. The
first is that there are dueling XAML 2.7 dependencies. I avoided that
by leaving those as per-project package.config entries. The second is
that any projects outside of the .sln (such as the Island samples) were
not touched.
## Validation Steps Performed
The primary validation is that the solution builds without errors. That
is what I'm seeing (x64|Debug). I also ran `git clean -fdx` from the
root of the repo to wipe it to clean and then opened the solution and
was able to build successfully. The project F5 deploys and looks fine
to me with just a cursory glance. The tests also largely pass (7418
pass, 188 fail, 14 other) which is as good or better than the baseline I
established from a clean clone.
Closes#12708
In two instances, the help text for the settings UI refers to _transparency_ when we're really talking about _opacity._ This PR changes those occurences to more accurately reflect the setting being described.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#12592
Previously we would only call `SetWindowSize` and `TriggerRedrawAll` if the
viewport size in characters changed. This commit removes the limitation.
Since the if-condition limiting full redraws is now gone, this commit
moves the responsibility of limiting the calls up the call chain.
With `_refreshSizeUnderLock` now being a heavier function call
than before, some surrounding code was thus refactored.
## PR Checklist
* [x] Closes#11317
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
Test relevant for #11317:
* Print text, filling the entire window
* Move the window from a 150% scale to a 300% scale monitor
* The application works as expected ✅
Regression tests:
* Text zoom with Ctrl+Plus/Minus/0 works as before ✅
* Resizing a window works as before ✅
* No deadlocks, etc. during settings updates ✅
Changed the default value of `"trimBlockSelection"` to `true`.
* [x] Closes#12536
## Validation Steps Performed
Without editing the setting, the toggle switch was enabled by default in the settings UI.
Since RS1 (CL 3427806), gdi32 has been available on OneCoreUAP-based
editions of Windows. Therefore, we no longer need the indirect call to
TranslateCharsetInfo and without that, IInputServices doesn't have a
reason to exist.
In an ideal world.
Unfortunately, we actually do use IInputServices as a backhanded way to
get at the ConIoSrvComm from other OneCoreInteractivity components...
we also use it in a trick we play in RundownAndExit to make sure that
the ConIoSrv connection tears down at the right time.
I've replaced that trick with an equally dirty trick, but one that is
*very explicit* about what it's doing.
This change would break CJK+Grid Lines and GetConsoleLangID on
OneCore-based editions that do not host the extension apiset
ext-ms-win-gdi-font-l1... so we're falling back to the old ConIoSrvComm
implementation directly in `dbcs.cpp`.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 74ca635710701c45cda9eefd13dafc6f180feb49
Related work items: MSFT-38632962
5964060 contains a regression were the grayscale blending algorithm used the
gamma corrected foreground color as the pixel color, instead of blending that
color with the background color first. Due to that the background color
got lost / got set to black. This breaks any dark-on-bright outputs.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
All 3 "antialiasing" settings work just like in DxEngine. ✅
## Summary of the Pull Request
Fixes a bug in ConHost where Narrator wouldn't read the deleted letter after the user pressed backspace.
## References
MSFT:31748387
## Detailed Description of the Pull Request / Additional comments
`WriteCharsLegacy()` already calls `NotifyAccessibilityEventing()` when text is inserted into the buffer ([see code](855e1360c0/src/host/_stream.cpp (L559-L563))). However, when backspace is pressed, the entire if-condition is skipped over, resulting in the accessibility event not being fired. `WriteCharsLegacy()` has a separate branch that is dedicated to handling backspace, so I added a call to the relevant logic to notify UIA at the end of that.
## Validation Steps Performed
✅ <kbd>Backspace</kbd> deletes a character and Narrator reads it
✅ <kbd>Backspace</kbd> still works with NVDA and JAWS (unchanged behavior)
✅ if the input buffer had wrapped text, the above scenario works as expected
✅ scenario works for CMD, PowerShell Core, and WSL
PR #12722 introduced a dependency on usp10.dll. The Script* APIs are split
between gdi32 and usp10, so we needed to add a new entry to the sources
files for anybody who consumed the GDI renderer.
## Summary of the Pull Request
Fixes a bug in ConHost where Narrator wouldn't read the deleted letter after the user pressed backspace.
## References
MSFT:31748387
## Detailed Description of the Pull Request / Additional comments
`WriteCharsLegacy()` already calls `NotifyAccessibilityEventing()` when text is inserted into the buffer ([see code](855e1360c0/src/host/_stream.cpp (L559-L563))). However, when backspace is pressed, the entire if-condition is skipped over, resulting in the accessibility event not being fired. `WriteCharsLegacy()` has a separate branch that is dedicated to handling backspace, so I added a call to the relevant logic to notify UIA at the end of that.
## Validation Steps Performed
✅ <kbd>Backspace</kbd> deletes a character and Narrator reads it
✅ <kbd>Backspace</kbd> still works with NVDA and JAWS (unchanged behavior)
✅ if the input buffer had wrapped text, the above scenario works as expected
✅ scenario works for CMD, PowerShell Core, and WSL
Some applications like `vim -H` implement their own BiDi reordering.
Previously we used `PolyTextOutW` which supported such arrangements,
but with a0527a1 and the switch to `ExtTextOutW` we broke such applications.
This commit restores the old behavior by reimplementing the basics
of `ExtTextOutW`'s internal workings while enforcing LTR ordering.
## Validation Steps Performed
* Create a text file with "ץחסק פחופפסנ חס קוח ז׳חסש ץקקטק פחטסץ"
Viewing the text file with `vim -H` presents the contents as expected ✅
* Printing enwik8 is as fast as before ✅
* Font fallback for various eastern scripts in enwik8 works as expected ✅
* `DECDWL` double-width sequences ✅
* Horizontal scrolling (apart from producing expected artifacts) ✅Closes#12294
(cherry picked from commit d97d9f0fcf)
The legacy console used to use case-sensitive history deduplication and
this change reverts the logic to restore ye olde history functionality.
This commit additionally changes the other remaining `std::equal` plus
`std::towlower` check into a `CompareStringOrdinal` call,
just because that's what MSDN suggests to use in such situations.
## PR Checklist
* [x] Closes#4186
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Enter `test /v`
* Enter `test /V`
* Browsing through the history yields both items ✅
(cherry picked from commit 6bc2b4af09)
`WideCharToMultiByte` doesn't write a final null-byte by default.
`til::u16u8` avoids the problem.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Test passes in Debug builds ✅
(cherry picked from commit 5072ee640f)
This removes one source of potential integer overflows from the Viewport class.
Other parts were left untouched, as this entire class of overflow issues gets
fixed all at once, as soon as we replace COORD with til::coord (etc.).
## PR Checklist
* [x] Closes#5271
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Call `ScrollConsoleScreenBufferW` with out of bounds coordinates
* Doesn't crash ✅
(cherry picked from commit a4a6dfcc8d)
As noted in #6759:
> `RtlCreateUnicodeString` creates a copy of the string on the process heap and the `PortName` variable has local-scope. The string doesn't get freed with `RtlFreeUnicodeString` before the function returns creating a memory leak.
> `CIS_ALPC_PORT_NAME` is a constant string and the `PortName` variable should instead be initialized using the `RTL_CONSTANT_STRING` macro:
>
> ```c++
> static UNICODE_STRING PortName = RTL_CONSTANT_STRING(CIS_ALPC_PORT_NAME);
> ```
I actually built this in the OS repo to make sure it'll still build, because this code doesn't even build outside Windows.
* [x] Closes#6759
* I work here.
(cherry picked from commit 349b76795f)
This adds some validation in the `UiaTextRange` ctor for the cursor position.
#8730 was caused by creating a `UiaTextRange` at the cursor position when it was in a delayed state (meaning it's purposefully hanging off of the right edge of the buffer). Normally, `Cursor` maintains a flag to keep track of when that occurs, but Windows Terminal isn't maintaining that properly in `Terminal::WriteBuffer`.
The _correct_ approach would be to fix `WriteBuffer` then leverage that flag for validation in `UiaTextRange`. However, messing with `WriteBuffer` is a little too risky for our comfort right now. So we'll do the second half of that by checking if the cursor position is valid. Since the cursor is really only expected to be out of bounds when it's in that delayed state, we get the same result (just maybe a tad slower than simply checking a flag).
Closes#8730
Filed #12440 to track changes in `Terminal::_WriteBuffer` for delayed EOL wrap.
## Validation Steps Performed
While using magnifier, input/delete wrapped text in input buffer.
(cherry picked from commit 5dcf5262b4)
This commit fixes an issue, where we failed to emit a DECTCEM sequence to hide
the cursor if it was hidden before XtermEngine's first frame was finalized.
Even in such cases we need to emit a DECTCEM sequence
in order to ensure we're in a consistent state.
## Validation Steps Performed
* Added test✅
* Run #12401's repro steps around 30 times✅Closes#12401
(cherry picked from commit dbb70778d4)
The pull request fixes the issue where "sizeof" parameter was use instead of "ARRAYSIZE".
## PR Checklist
* [x] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
This was a pretty straight forward issue, i just replace sizeof which gives the byte size with ARRAYSIZE which give the number of elements in the array.
(cherry picked from commit 5fa1ba8dab)
In !1806141, MapVirtualKey and VkKeyScan became part of OneCore (yeah,
in 2018!). GetKeyState I can't quite figure out... but it looks like
the places we would use it (Win32 Window and Selection) already either
don't exist (window) or don't work (selection) in OneCore conhost.
Removing these redirects reduces our maintenance burden quite a bit.
Because we had to run all keyboard code through the service locator,
anything that had a dependency on key translation needed to link the
entire console host. Therefore, for anything that conhost depended upon,
so did the unit test binaries. Ugh.
I chose to keep TranslateCharsetInfo, even though it looks like gdi32 is
hosted in OneCore and the code appears as though it would work. It was
not in my critical path, and is a very basic local lookup that only powers
whether gridlines are available and the console's "Lang ID".
TEST RESULTS FROM ONECORE
Microsoft.Console.Host.FeatureTests.dll
Summary: Total=408, Passed=140, Failed=266, Blocked=0, Not Run=0, Skipped=2
I do not know how to make sure that the feature tests run properly on
OneCore. It looks like ModuleSetup is failing, which is unlikely to be
related to this change (especially given that conhost *does* launch.)
If I re-run the categories individually, they either pass or get marked
as skipped intentionally.
Microsoft.Console.Host.IntegrityTests.dll
Summary: Total=5, Passed=0, Failed=5, Blocked=0, Not Run=0, Skipped=0
Same.
Microsoft.Console.Interactivity.Win32.UnitTests.dll
Summary: Total=392, Passed=392, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.TextBuffer.UnitTests.dll
Summary: Total=27, Passed=27, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.Host.UIAutomationTests.dll
Summary: Total=6, Passed=0, Failed=0, Blocked=6, Not Run=0, Skipped=0
Microsoft.Console.Types.UnitTests.dll
Summary: Total=8, Passed=8, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Terminal.Til.UnitTests.dll
Summary: Total=290, Passed=290, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.VirtualTerminal.Parser.UnitTests.dll
Summary: Total=748, Passed=747, Failed=0, Blocked=0, Not Run=0, Skipped=1
Microsoft.Console.VirtualTerminal.Adapter.UnitTests.dll
Summary: Total=222, Passed=222, Failed=0, Blocked=0, Not Run=0, Skipped=0
Microsoft.Console.Host.UnitTests.dll
Summary: Total=5235, Passed=5222, Failed=0, Blocked=12, Not Run=0, Skipped=1
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev c4c0267e1139d8d205bc9995da7906e5b09f03db
Related work items: MSFT-38632962
Some applications like `vim -H` implement their own BiDi reordering.
Previously we used `PolyTextOutW` which supported such arrangements,
but with a0527a1 and the switch to `ExtTextOutW` we broke such applications.
This commit restores the old behavior by reimplementing the basics
of `ExtTextOutW`'s internal workings while enforcing LTR ordering.
## Validation Steps Performed
* Create a text file with "ץחסק פחופפסנ חס קוח ז׳חסש ץקקטק פחטסץ"
Viewing the text file with `vim -H` presents the contents as expected ✅
* Printing enwik8 is as fast as before ✅
* Font fallback for various eastern scripts in enwik8 works as expected ✅
* `DECDWL` double-width sequences ✅
* Horizontal scrolling (apart from producing expected artifacts) ✅Closes#12294
[Git2Git] Merged PR 7088552: Silence TVS by using %d (int) instead of %td (ptrdiff_t)
Silence TVS by using %d (int) instead of %td (ptrdiff_t)
This commit also includes an automatic sources.dep fix.
Fixes MSFT-38106841
Fixes MSFT-38106866
Related work items: #38106841, #38106866 Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 5983633fe90cccdb1165ab28935bd704414bb6f2
Related work items: #38106841, #38106866
## THE WHITE WHALE
This is a fairly naive fix for this bug. It's not terribly performant,
but neither is resize in the first place.
When the buffer gets resized, typically we only copy the text up to the
`MeasureRight` point, the last printable char in the row. Then we'd just
use the last char's attributes to fill the remainder of the row.
Instead, this PR changes how reflow behaves when it gets to the end of
the row. After we finish copying text, then manually walk through the
attributes at the end of the row, and copy them over. This ensures that
cells that just have a colored space in them get copied into the new
buffer as well, and we don't just blat the last character's attributes
into the rest of the row. We'll do a similar thing once we get to the
last printable char in the buffer, copying the remaining attributes.
This could DEFINITELY be more performant. I think this current
implementation walks the attrs _on every cell_, then appends the new
attrs to the new ATTR_ROW. That could be optimized by just using the
actual iterator. The copy after the last printable char bit is also
especially bad in this regard. That could likely be a blind copy - I
just wanted to get this into the world.
Finally, we now copy the final attributes to the correct buffer: the new
one. We used to copy them to the _old_ buffer, which we were about to
destroy.
## Validation
I'll add more gifs in the morning, not enough time to finish spinning a
release Terminal build with this tonight.
Closes#32🎉🎉🎉🎉🎉🎉🎉🎉🎉Closes#12567
The x86 Conhost UTs were failing because--when run in a specific order
(SearchTests, then SelectionInputTests)--PrepareGlobalScreenBuffer would
attempt to enable painting on a renderer that was dead and gone and
pushing up daisies.
The legacy console used to use case-sensitive history deduplication and
this change reverts the logic to restore ye olde history functionality.
This commit additionally changes the other remaining `std::equal` plus
`std::towlower` check into a `CompareStringOrdinal` call,
just because that's what MSDN suggests to use in such situations.
## PR Checklist
* [x] Closes#4186
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Enter `test /v`
* Enter `test /V`
* Browsing through the history yields both items ✅
HLSL uses 32-bit booleans, while C++ uses 8-bit ones aligned by 32-bit.
This meant that the shader was accessing uninitialized memory
forcing ClearType blending to be randomly enabled.
This regressed in commit 5964060.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* ClearType blending works ✅
* Enabling transparent backgrounds forces grayscale blending ✅
`WideCharToMultiByte` doesn't write a final null-byte by default.
`til::u16u8` avoids the problem.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Test passes in Debug builds ✅
`std::basic_string_view::substr` throws an exception if the first argument
(offset) is out of range. If UIA is running, this creates _a lot_ of exceptions
and associated log output. This trivial change takes care of that.
After this commit we only set the default fields of a profile - primarily the
name field - as late as possible, after layering has already completed.
This ensures that we pick up any modifications from fragments.
## PR Checklist
* [x] Closes#12520
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Add a fragment at
`%LocalAppData%\Microsoft\Windows Terminal\Fragments\Fragment\fragment.json`
with
`{"profiles":[{"updates":"{61c54bbd-c2c6-5271-96e7-009a87ff44bf}","name":"NewName"}]}`
* Windows PowerShell profile is created with the name "NewName" in settings.json ✅
* Drop engine support for DirectX 9.1
Practically no one has such old hardware anymore and AtlasEngine additionally
drops support for 10.0. The fallback also didn't work properly,
because the `FeatureLevels` array failed to include 9.2 and 9.3.
We'll simply fall back to WARP on all such devices.
* Optimize shaders during compilation
The two new flags increase shader performance sometimes significantly.
* Fix shader feature level flags
D3D feature level 10.0 only support 4.0 and 10.1 only 4.1 shaders.
## PR Checklist
* [x] Closes#12655
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Add `WindowsTerminal.exe` in `dxcpl.exe`
* Add a basic `experimental.pixelShaderPath`
* All forced feature levels between `9_1` and `11_1` render as expected ✅
## Summary of the Pull Request
The purpose of the `IRenderTarget` interface was to support the concept
of multiple buffers in conhost. When a text buffer needed to trigger a
redraw, the render target implementation would be responsible for
deciding whether to forward that redraw to the renderer, depending on
whether the buffer was active or not.
This PR instead introduces a flag in the `TextBuffer` class to track
whether it is active or not, and it can then simply check the flag to
decide whether it needs to trigger a redraw or not. That way it can work
with the `Renderer` directly, and we can avoid a bunch of virtual calls
for the various redraw methods.
## PR Checklist
* [x] Closes#12551
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12551
## Detailed Description of the Pull Request / Additional comments
Anywhere that had previously been getting an `IRenderTarget` from the
`TextBuffer` class in order to trigger a redraw, will now just call the
`TriggerRedraw` method on the `TextBuffer` class itself, since that will
handle the active check which used to be the responsibility of the
render target. All the redraw methods that were in `IRenderTarget` are
now exposed in `TextBuffer` instead.
For this to work, though, the `Renderer` needed to be available before
the `TextBuffer` could be constructed, which required a change in the
conhost initialization order. In the `ConsoleInitializeConnectInfo`
function, I had to move the `Renderer` initialization up so it could be
constructed before the call to `SetUpConsole` (which initializes the
buffer). Once both are ready, the `Renderer::EnablePainting` method is
called to start the render thread.
The other catch is that the renderer used to setup its initial viewport
in the constructor, but with the new initialization order, the viewport
size would not be known at that point. I've addressed that problem by
moving the viewport initialization into the `EnablePainting` method,
since that will only be called after the buffer is setup.
## Validation Steps Performed
The changes in architecture required a number of tweaks to the unit
tests. Some were using a dummy `IRenderTarget` implementation which now
needed to be replaced with a full `Renderer` (albeit with mostly null
parameters). In the case of the scroll test, a mock `IRenderTarget` was
used to track the scroll delta, which now had to be replaced with a mock
`RenderEngine` instead.
Some tests previously relied on having just a `TextBuffer` but without a
`Renderer`, and now they require both. And tests that were constructing
the `TextBuffer` and `Renderer` themselves had to be updated to use the
new initialization order, i.e. with the renderer constructed first.
Semantically, though, the tests still essentially work the same way as
they did before, and they all still pass.
## Summary of the Pull Request
Closes#12670
Visual Studio 2022 offered to upgrade .NET Framework from an unsupported 4.5 to a supported 4.8. I let it do its thing (and undid a number of whitespace-only changes that aren't necessary). The project still builds after this. The UIA tests fail to run but I think that is preexisting and will be filing a new issue momentarily.
## PR Checklist
* [x] Closes#12670
* [x] Tests added/passed
## Validation Steps Performed
The solution compiles in VS2022 (except for #12673).
The store did not like when I uploaded two Windows Terminal packages
built on the same date, because the appxbundle version defaulted to
YYYY.MMDD.something.
There was a risk that using *this* version number will fail because it is
thousands of numbers less than "2022". We'll have to see if the store
rolls it out properly. I cannot find any documentation on how the store
rolls out *bundle* versions (it is very aware of .appx versions...).
A local test with 1.14.72x (Preview) published via the store seems to
have worked.
This commit fixes a stray exception during settings loading,
caused by a failure to obtain the app's extension catalog.
## PR Checklist
* [x] Closes#12305
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
I'm unable to replicate the issue. ❌
However an error log was provided in #12305 with which
the function causing the exception could be determined.
This regressed recently in cfaa315.
Initially I tried to migrate TestHostApp to C++/WinRT, but due to the
unbearable compile times I've reverted it back to C++/CX (>20x difference).
Unfortunately I then forgot to fix the underlying issue before submitting a PR.
## PR Checklist
* [x] Closes#12673
* [x] I work here
* [x] Tests added/passed
Many articles I read while writing this engine claimed that GPUs can't
do branches like CPUs can. One common approach to branching in GPUs is
apparently to "mask" out results, a technique called branch predication.
The GPU will simply execute all instructions in your shader linearly,
but if a branch isn't taken, it'll ignore the computation results.
This is unfortunate for our shader, since most branches we have are
only very seldomly taken. The cursor for instance is only drawn
on a single cell and underlines are seldomly used.
But apparently modern GPUs (2010s and later?) are actually entirely
capable of branching, _if_ all lanes ("pixels") processed by a
wave (""GPU core"") take the same branch.
On both my Nvidia GPU (RTX 3080) and Intel iGPU (Intel HD Graphics 530)
this change has a positive impact on power draw. Most noticeably on the
latter this reduces power draw from 900mW down to 600mW at 60 FPS.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
It seems to work fine on Intel and Nvidia GPUs.
Unfortunately I don't have a AMD GPU to test this on, but I suspect it can't be worse.
## Summary of the Pull Request
This change makes Windows Terminal raise a `RaiseNotificationEvent()` ([docs](https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.automation.peers.automationpeer.raisenotificationevent?view=winrt-22000)) for new text output to the buffer.
This is intended to help Narrator identify what new output appears and reduce the workload of diffing the buffer when a `TextChanged` event occurs.
## Detailed Description of the Pull Request / Additional comments
The flow of the event occurs as follows:
- `Terminal::_WriteBuffer()`
- New text is output to the text buffer. Notify the renderer that we have new text (and what that text is).
- `Renderer::TriggerNewTextNotification()`
- Cycle through all the rendering engines and tell them to notify handle the new text output.
- None of the rendering engines _except_ `UiaEngine` has it implemented, so really we're just notifying UIA.
- `UiaEngine::NotifyNewText()`
- Concatenate any new output into a string.
- When we're done painting, tell the notification system to actually notify of new events occurring and clear any stored output text. That way, we're ready for the next renderer frame.
- `InteractivityAutomationPeer::NotifyNewOutput()` --> `TermControlAutomationPeer::NotifyNewOutput`
- NOTE: these are split because of the in-proc and out-of-proc separation of the buffer.
- Actually `RaiseNotificationEvent()` for the new text output.
Additionally, we had to handle the "local echo" problem: when a key is pressed, the character is said twice (once for the keyboard event, and again for the character being written to the buffer). To accomplish this, we did the following:
- `TermControl`:
- here, we already handle keyboard events, so I added a line saying "if we have an automation peer attached, record the keyboard event in the automation peer".
- `TermControlAutomationPeer`:
- just before the notification is dispatched, check if the string of recent keyboard events match the beginning of the string of new output. If that's the case, we can assume that the common prefix was the "local echo".
This is a fairly naive heuristic, but it's been working.
Closes the following ADO bugs:
- https://dev.azure.com/microsoft/OS/_workitems/edit/36506838
- (Probably) https://dev.azure.com/microsoft/OS/_workitems/edit/38011453
## Test cases
- [x] Base case: "echo hello"
- [x] Partial line change
- [x] Scrolling (should be unaffected)
- [x] Large output
- [x] "local echo": keyboard events read input character twice
This sure is bodgy, but it makes sense. Right now, when we delete a profile, we load in a totally new content for the new profile's settings. That one resets the scroll view and the focus, and now the "delete" button is obviously not focused.
Instead, this PR will manually re-focus the delete button of a profile page when the page is navigated to _because we deleted another profile_.
* [x] This will take care of #11971
This removes one source of potential integer overflows from the Viewport class.
Other parts were left untouched, as this entire class of overflow issues gets
fixed all at once, as soon as we replace COORD with til::coord (etc.).
## PR Checklist
* [x] Closes#5271
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Call `ScrollConsoleScreenBufferW` with out of bounds coordinates
* Doesn't crash ✅
This fixes a pair of inbox bugs, hopefully.
* MSFT:35731327
* There's a small window where a peasant is being created when a monarch is exiting. When that happens, the new peasant will try to tell itself (the new monarch) when the peasant was last activated, but because the window hasn't actually finished instantiating, the peasant doesn't yet have a LastActivatedArgs to tell the monarch about.
* MSFT:32518679 (ARM version) / MSFT:32279047 (AMD64 version)
* This one's tricky. Not totally sure this is the fix, bug assuming my hypothesis is correct, this should fix it. Regardless, this does fix a bug that was in the code.
* If the king dies right as another window is starting, right while the new window is starting to ProposeCommandline to the monarch, the monarch could die. If it does, the new window just explodes too. Not what you want.
Vaguely tested the second bug manually, by setting breakpoints in the monarch, starting a defterm, then exiting the monarch while the handoff was in process. That now creates a new window, so that's at least something. `RemotingTests::TestProposeCommandlineWithDeadMonarch` was the closest I could get to testing that.
The first bug only got an eye check. Not sure how to repro, but I figured yeet and hopefully we get it.
* [x] Closes#12624
The `bg != _r.backgroundColor` invalidation check wasn't symmetric with
us setting `_r.backgroundColor` to `bg | _api.backgroundOpaqueMixin`.
Due to this, when the `backgroundOpaqueMixin` changed,
we didn't always update the const buffer appropriately.
## PR Checklist
* [x] Closes#11773
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Enable window transparency (`backgroundOpaqueMixin == 0x00000000`)
* Maximize window (ensure we have gutters in the first place)
* Disable window transparency (`backgroundOpaqueMixin == 0xff000000`)
* Gutters are filled ✅
This commit enables `/std:c++20` for local development under VS17.
Our CIs will continue to use VS16 and C++17 for now in order to reduce
the likelihood of regressions during the current development cycle.
It's expected that we'll migrate to VS17 soon, as this
is what conhost is already being built with anyways.
## PR Checklist
* [x] Closes#12510
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Everything compiles under `/std:c++20` ✅
This regressed in 2b202ce6, which removed `ACTCTX_FLAG_RESOURCE_NAME_VALID`
during `CreateActCtxW` under the assumption that an executable only has
one manifest. conhost has two however and we need to pick the correct one.
On OpenConsole this causes the expected `ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET`.
Closes MSFT:38355907
(cherry picked from commit c820af46b7)
By replacing `IDWriteFontSetBuilder2::AddFontFile` with
`IDWriteFactory5::CreateFontFileReference` and
`IDWriteFontSetBuilder1::AddFontFile` we add nearby
font loading support for Windows 10, build 15021.
This commit also fixes font fallback for AtlasEngine,
which was crashing during testing.
Finally it fixes a bug in DxEngine, where we only created a "nearby" font
collection if we couldn't find the font in the system collection. This doesn't
fix the bug, if the font is locked or broken in the system collection.
This is related to #11648.
## PR Checklist
* [x] Closes#12420
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Build a Debug version of Windows Terminal
* Put Jetbrains Mono into the writeable AppX directory
* Jetbrains Mono is present in the settings UI ✅
* DxEngine works with Jetbrains Mono ✅
* AtlasEngine works with Jetbrains Mono ✅
This regressed in 2b202ce6, which removed `ACTCTX_FLAG_RESOURCE_NAME_VALID`
during `CreateActCtxW` under the assumption that an executable only has
one manifest. conhost has two however and we need to pick the correct one.
On OpenConsole this causes the expected `ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET`.
Closes MSFT:38355907
## Summary of the Pull Request
This makes it so that the settings.json backups are no longer created when the user saves their settings via the Settings UI.
Closes#11703
"Summon" was translated as a synonym for "citation" in Spanish instead
of treating it as a RPG-related word. "Show/Hide" will hopefully
allow an improved automatic translation in the future.
Closes#10691
2b202ce6 introduced a bug, where FreeProcessData was called without the console
lock being held. The previous code can be found in 40e3dea, on line 441-454.
## PR Checklist
* [x] Closes MSFT:21372705
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
None, as this fix is purely theoretic, but it matches the stack trace
and 40e3dea clearly wasn't correctly ported to strict C++ either.
## Summary of the Pull Request
Fixes RTF generation for text with Unicode characters.
## PR Checklist
* [x] Closes#12379
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Added some unit tests.
Ran the following in PowerShell and copied the emitted text into WordPad.
```pwsh
echo "This is some Ascii \ {}`nLow code units: á é í ó ú `u{2b81} `u{2b82}`nHigh code units: `u{a7b5} `u{a7b7}`nSurrogates: `u{1f366} `u{1f47e} `u{1f440}"
```
2b202ce6 introduced a bug, where FreeProcessData was called without the console
lock being held. The previous code can be found in 40e3dea, on line 441-454.
## PR Checklist
* [x] Closes MSFT:21372705
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
None, as this fix is purely theoretic, but it matches the stack trace
and 40e3dea clearly wasn't correctly ported to strict C++ either.
From MSFT:36797001. Okay so this is only .22% of our crashes, but every little bit helps, right?
Turns out this is also hitting in:
* MSFT:35726322
* MSFT:34662459
and together they're a fairly hot bug.
There's a large class of bugs where we might get a callback to one of our event handlers when we call `app.Close()` in the `AppHost` dtor. This PR adds manual revokers to these events, and makes sure to revoke them BEFORE nulling out the `_window`. That will prevent callbacks during the rest of the dtor, when the `_window` is null.
This is intended to be a PR triggered build that only runs when
features.xml has been touched, to validate that the disabled features do
not cause compilation errors.
Four (4) squashed changes, with messages preserved.
## release: move symbol publication into its own phase
Right now, symbol publication happens every time we produce a final
bundle. In the future, we may be producing multiple bundles from the
same pipeline run, and we need to make sure we only do *one* symbol
publication to MSDL.
When we do that, it will be advantageous for us to have just one phase
that source-indexes and publishes all of the symbols.
## Remove Terminal's built-in copy of the VC Runtime
This removes the trick we pulled in #5661 and saves us ~550kb per arch.
Some of our dependencies still depend on the "app" versions of the
runtime libraries, so we are going to continue shipping the forwarders
in our package. Build rules have been updated to remove the non-Desktop
VCLibs dependency to slim down our package graph.
This is not a problem on Windows 11 -- it looks like it's shipped inbox.
**BREAKING CHANGE**: When launched unpackaged, Terminal now requires the
vcruntime redist to be installed.
## Prepare for toggling XAML between 2.7.0 and -prerelease on Win11
common.openconsole.props is a pretty good place to stash the XAML
version since it is included in every project (including the WAP
project (unlike the C++ build props!)).
I've gone ahead and added a "double dependency" on multiple XAML
versions. We'll toggle them with a build flag.
## Run the release pipeline twice, for Win10 and Win11, at the same time
This required some changes in how we download artifacts to make sure
that we could control which version of Windows we were processing in any
individual step.
We're also going to patch the package manifest on the Windows 11 version
so the store targets it more specifically.
On top of the prior three steps, this lets us ship a Windows 11
package that costs only ~15MB on disk. The Windows 10 version, for
comparison, is about 40.
The previous implementation only inverted the RGB values of the cell,
but failed to account for situations where the `color` is transparent,
which is the case when `backgroundOpaqueMixin` is 0 (for instance if
acrylic backgrounds are enabled). In these situations the alpha
component remained 0 which caused the cursor to be invisible.
For some inexplicable reason this issue is only visible on a HDR display,
even though it should also effect regular ones. God knows why.
With this commit the cursor texture is treated as a mask that inverts the color.
We use branching here, because I couldn't come up with a more clever solution.
## PR Checklist
* [x] Closes#12507
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Cursor is visible on a HDR display with acrylic background ✅
* TBD performance benchmark for `[branch]` ❌
Fixes two crashes amounting to 14% of our crash burden in Simulated
Selfhost. I can't reproduce this organically, but I was able to do so by
forcing the command palette to be empty.
## Summary of the Pull Request
In PR #12462, a new `maxversiontested` entry was added to the
_WindowsTerminal.manifest_ file which now gets propagated to the
_TerminalApp.Unit.Tests.manifest_ file whenever a full build is
executed. This PR is just committing the updated test manifest.
## PR Checklist
* [x] Closes#12543
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12543
## Summary of the Pull Request
Prevents a crash that could occur when invoking `wt C:\`
## PR Checklist
* [x] Closes#12535
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
Updates `CascadiaSettings::NormalizeCommandLine()` to check that there are a suitable number of command line arguments to be concatenated together, to prevent accessing an array index in `argv` that doesn't exist.
Also prevents a test flake that could occur in `TerminalSettingsTests::CommandLineToArgvW()`, due to generating an empty command line argument.
## Validation Steps Performed
Added a test, and checked that invoking each of the command lines below behaved as expected:
```
wtd C:\ # Window pops up with [error 2147942405 (0x80070005) when launching `C:\']
wtd C:\Program Files # Window pops up with [error 2147942402 (0x80070002) when launching `C:\Program Files']
wtd cmd # cmd profile pops up
wtd C:\Program Files\Powershell\7\pwsh -WorkingDirectory C:\ # PowerShell profile pops up in C:\
wtd "C:\Program Files\Powershell\7\pwsh" -WorkingDirectory C:\ # PowerShell profile pops up in C:\
wtd . # Window pops up with [error 2147942405 (0x80070005) when launching `.']
```
## Summary of the Pull Request
Somehow, the controls v2 update caused an issue where if you as much as _load_ a content dialog when there's already one open, we get holes in the terminal window (#12447)
This commit introduces logic to `TerminalPage` to check whether there is a content dialog open before we try to load another one.
## PR Checklist
* [x] Closes#12447
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Can no longer repro #12447
"Acrylic material" is the official name as used on Microsoft Docs
and should ensure it gets properly translated in all languages.
## PR Checklist
* [x] Closes#9846
* [x] Closes MSFT:36776499
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
We originally intended to replace the strings with "acrylic transparency",
but "acrylic material" is actually the official term on Microsoft Docs.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fix typos found by codespell. Some of it in documentation and user-visible text, mostly in code comments. While I understand you might not be interested in fixing code comments, one of the reasons being extra noise in git history, kindly note that most spell checking tools do not discriminate between documentation and code comments. So it's easier to fix everything for long maintenance.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: [#501](https://github.com/MicrosoftDocs/terminal/pull/501)
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I have checked and re-checked all changes.
When the dpi is changed, call `updateFont()` instead of `TriggerFontChange`, this
means that we continue to use the existing font features/axes
Closes#11287
## Summary of the Pull Request
Modifies the OneFuzz CI Job so that it attempts to read the notification config from a file rather than the command line.
## References
Potential oversight in #10431.
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
Noticed that the CI job was failing on main, so took a look. According to the [docs](7f7d76fa7f/docs/notifications.md (implementation)), files should be referenced using `@./` notation.
We chose to use the "ContextMenu" resource compartment when we
changed the package name to Terminal in #12264 because it was more
broadly localized than the rest of the application.
It appears as though some platform features have trouble with the
"more qualified" resource paths that #12264 required.
To fix this, we will:
1. Copy all of the ContextMenu localizations into CascadiaPackage's
resource root
2. Switch all manifest resource paths to use resources from the package
root.
Regressed in #12264Closes#12384Closes#12406 (tracked in microsoft/powertoys#16118)
As noted in #6759:
> `RtlCreateUnicodeString` creates a copy of the string on the process heap and the `PortName` variable has local-scope. The string doesn't get freed with `RtlFreeUnicodeString` before the function returns creating a memory leak.
> `CIS_ALPC_PORT_NAME` is a constant string and the `PortName` variable should instead be initialized using the `RTL_CONSTANT_STRING` macro:
>
> ```c++
> static UNICODE_STRING PortName = RTL_CONSTANT_STRING(CIS_ALPC_PORT_NAME);
> ```
I actually built this in the OS repo to make sure it'll still build, because this code doesn't even build outside Windows.
* [x] Closes#6759
* I work here.
I believe this fixes#12383, but I can't seem to find a way to set up a N SKU VM to confirm this.
* [ ] TODO: wait till the morning to finish copying the N vhd I found off the build shares, to confirm this doesn't crash on launch.
This has been a saga.
Basically, any resources in `App.xaml` aren't going to be able to reference other theme-aware resources. We can't change the theme of the app at runtime, only elements within the app. So we can't use `ApplicationPageBackgroundThemeBrush` in app.xaml, because it will ALWAYS be evaluated as the OS theme version of that brush.
* regressed in #12326
* See also #10864
* #3917 CANNOT be fixed in the same way. We're lucky here that the TabView uses a `{ThemeResource TabViewBackground}` in markup to set the bg. We're not similarly lucky with the Pane one.
* [x] closes#12356
* [x] Tested manually. You can confirm, my eyes are bleeding from the OS-wide light mode
#12348 introduced an off-by-one bug. While the `NormalizeCommandLine` loop
should exit early when there aren't at least _two_ arguments to be joined,
the final argument-append needs to happen even if just _one_ argument exists.
This commit fixes the issue and introduces changes to additionally monitor
the early loop exit, as well as the call to `ExpandEnvironmentStringsW`.
## PR Checklist
* [x] Closes#12461
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* All `TerminalSettingsTests` tests pass ✅
* use `FontFamily="{ThemeResource SymbolThemeFontFamily}"` where possible, in XAML
* use `FontFamily{ L"Segoe Fluent Icons, Segoe MDL2 Assets" }` in codebehind
Basically just a simple string replace.
* [x] This was a bullet point in #11353
* [x] Confirmed manually on my win10 PC
* see also #12438
Actually, this is the last bullet in #11353, so I'm gonna say closes#11353.
Screenshots below.
AtlasEngine enables various debug options for D2D and D3D in Debug builds.
Among those are resource leak checks, which were broken in OpenConsole
due to the unclean exit in `ServiceLocator::RundownAndExit`.
This commit fixes the issue by running the destructors
of any renderers registered in the Window class first.
## PR Checklist
* [x] Closes#12414
* [x] I work here
## Validation Steps Performed
* Set `HKEY_CURRENT_USER\Console\UseDx` to `2`
* Run `OpenConsole.exe`
* Exit
* No exceptions are thrown ✅
Now that we've figured out how to publish the public symbols to the official Microsoft download server... we may as well embed the source code linking information inside of them given that it's right here on GitHub. This attempts to run our existing source linking scripts against the public copy of the symbols.
## PR Checklist
* [x] Closes#12443
* [x] I work here
* [x] Tested manually
## Validation Steps Performed
* [x] Build with it: https://dev.azure.com/microsoft/Dart/_build/results?buildId=44930661&view=logs&j=8f802011-b567-5b81-5fa6-bce316c020ce
* [x] Point the debugger at them and see if it can find the sources
* [x] Maybe also look at them in a hex editor or whatnot and validate I can see the source paths pointing at GitHub
Updates this narrator announcement message to include the number of results it found. There are two versions:
* one for a singular result
* one for multiple results.
which should help with loc.
We're trying to get this in with the loc hotfix, so 👀 please
* [x] will take care of the last bit of #7907
verified with narrator locally.
We're now building a fully provenance, compliance, and security
validated package (vpack) through our Release pipeline. This attaches
the last phase which automates the submission into the Windows product.
It will also automatically trace back the source, commit SHA, and build
to the submission here from the Windows side.
* [x] Automates a manual activity I performed a few times recently
* [x] I work here
* [x] Ran a test of it against `release-1.12` and it worked
## Summary of the Pull Request
Followup from our discussion during team sync, the 'automatic adjustment of indistinguishable text' setting is going to be enabled for dev builds only.
## References
#12160
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Setting appears on dev build and the feature works
## Summary of the Pull Request
The only method that was really needed in the `AdaptDefault` class was
the `PrintString` method, and that could easily be moved into the
`ConGetSet` interface. That lets us get rid of the `AdaptDefault` class
altogether, simplifying the construction of the `AdaptDispatch` class,
and brings us more in line with the `TerminalDispatch` implementation.
## PR Checklist
* [x] Closes#12318
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12318
## Detailed Description of the Pull Request / Additional comments
The `Execute` method was never used at all, so there was no problem with
losing that. But I also noticed there was an equivalent `ExecuteChar`
method in the `ITerminalApi` interface, which also wasn't being used, so
I've removed that too.
Then there was a `Print` method taking a single `wchar_t` parameter, but
that was ultimately implemented as a `PrintString` call anyway, so that
translation could easily be accomplished in the `AdaptDispatch` calling
code, the same way it's done in `TerminalDispatch`.
That left us with the `PrintString` method, which could simply be moved
into the `ConGetSet` interface, which would then more closely match the
`ITerminalApi` interface.
There was also a `GetResult` method, that returned the status of the
last `PrintString`, but that result was never actually checked anywhere.
What I've done now is make the `PrintString` method throw an exception
on failure, and that will be caught and logged in the `StateMachine`.
## Validation Steps Performed
I've started a bash shell in conhost to verify that it still works.
Since almost everything goes through `PrintString` in VT mode, it should
be obvious if something was broken.
## Summary of the Pull Request
Other than the `s_ResizeWindow` function, the `DispatchCommon` class was
just a couple of static functions indirectly calling the `ConGetSet`
interface. So by moving the `s_ResizeWindow` implementation into the
`ConhostInternalGetSet` class, we could easily replace all usage of
`DispatchCommon` with direct calls to `ConGetSet`.
## PR Checklist
* [x] Closes#12253
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #12253
## Validation Steps Performed
I've manually confirmed the resizing operations still work as expected.
The other functions are harder to test, but were trivial replacements.
Basically, some WSL distros ship fragments that replace the `commandline` with the executable for their distro (`ubuntu.exe`, etc.). We didn't expect that when we changed the `startingDirectory` for them all to `~`.
Unfortunately, `~` is really never a valid path for a process on windows, so those distros would now fail with
```
[error 2147942667 (0x8007010b) when launching `ubuntu1804.exe']
Could not access starting directory "~"
```
If we find that we were unable to mangle `~` into the user's WSL `commandline`, then we will re-evaluate that `startingDirectory` as `%USERPROFILE%`, which is at least something sensible, if albeit not what they wanted.
* regressed in #12315
* [x] Closes#12353
* [x] Tested with a (`ubuntu1804.exe`, `~`) profile - launched successfully, where 1.13 in market fails.
* [x] added tests
We absolutely cannot allow a defterm connection to
auto-elevate. Defterm doesn't work for elevated senarios in the
first place. If we try accepting the connection, the spawning an
elevated version of the Terminal with that profile... that's a
recipe for disaster. We won't ever open up a tab in this window.
* [x] Closes#12370
* [x] Tested manually, since there's not a great way to add defterm tests
This PR updates the `ITerminalApi` and `TerminalDispatch` classes to
allow exceptions to be thrown in case of errors instead of using boolean
return values.
## References
This brings the Terminal code into alignment with the `AdaptDispatch`
and `ConGetSet` changes made in PR #12247.
And while this isn't exactly a fix for #12378, it does at least stop the
app from crashing now.
## Detailed Description of the Pull Request / Additional comments
All the `TerminalDispatch` methods have had their `noexcept` specifiers
dropped, and any `try`/`catch` wrapping removed, so exceptions will now
fall through to the `StateMachine` class where they should be safely
caught and logged.
The same goes for the `ITerminalApi` interface and its implementation in
the `Terminal` class. And many of the methods in this interface have
also had their `bool` return values changed to `void`, since there is
usually not a need for error return values now.
## Validation Steps Performed
I've manually tested the `OSC 9;9` sequence described in #12378 and
confirmed that it no longer crashes.
This adds some validation in the `UiaTextRange` ctor for the cursor position.
#8730 was caused by creating a `UiaTextRange` at the cursor position when it was in a delayed state (meaning it's purposefully hanging off of the right edge of the buffer). Normally, `Cursor` maintains a flag to keep track of when that occurs, but Windows Terminal isn't maintaining that properly in `Terminal::WriteBuffer`.
The _correct_ approach would be to fix `WriteBuffer` then leverage that flag for validation in `UiaTextRange`. However, messing with `WriteBuffer` is a little too risky for our comfort right now. So we'll do the second half of that by checking if the cursor position is valid. Since the cursor is really only expected to be out of bounds when it's in that delayed state, we get the same result (just maybe a tad slower than simply checking a flag).
Closes#8730
Filed #12440 to track changes in `Terminal::_WriteBuffer` for delayed EOL wrap.
## Validation Steps Performed
While using magnifier, input/delete wrapped text in input buffer.
With the recent change to allow text boxes to be bigger, the `Browse` button that some of them have was getting cut off when the window was too narrow. This change puts the `Browse` button below the text box instead of next to it to prevent this issue.
## PR Checklist
* [x] Closes#12335
Segoe Fluent isn't available on Windows 10, and doesn't stealthily ship with WinUI. So if we manually set the font family to `"Segoe Fluent Icons"`, then that will just display boxes in Win10.
This instead uses the resource `"{ThemeResource SymbolThemeFontFamily}"` which will gracefully fall back on Win10.
See:
* https://github.com/microsoft/microsoft-ui-xaml/issues/3745, which inspired this solution.
Guess what! The backgound image icons were also manually specifying this font, so they had to get updated too. I couldn't find any other `Segoe Fluent` references in the code.
* [x] Closes#12350
* [x] Checked Windows 11 locally
* [x] Checked Win10 (screenshots incoming from other machine)
This commit fixes an issue, where we failed to emit a DECTCEM sequence to hide
the cursor if it was hidden before XtermEngine's first frame was finalized.
Even in such cases we need to emit a DECTCEM sequence
in order to ensure we're in a consistent state.
## Validation Steps Performed
* Added test✅
* Run #12401's repro steps around 30 times✅Closes#12401
The focus box around the color schemes combo box was getting cut off, this change adds a small margin to the stackpanel to allow space for the focus box
## PR Checklist
* [x] Closes#12328
I have no idea how this is even possible to hit. If this is able to be null, then we failed to load the settings in such a catastrophic way that nothing should work. However, OP's Terminal seemed to have already loaded the settings. By all accounts, doesn't make sense.
Regardless, the code here would crash if this ever is null, so we may as well catch it.
* [x] Closes#12360
* [ ] No way to verify this since it isn't even reproable on OPs machine, but it does have a lot of hits for that failure bucket (!!!)
The previous code had two bugs for:
* paths with more than 1 whitespace
The code joins the argv array by replacing null-word terminators with
whitespace. Unfortunately it always referred to the separator between
`argv[0]` and `argv[1]` for this instead of continuing to join
those between 1 and 2, etc.
* paths sharing a common prefix with another directory
`SearchPathW` returns paths that aren't necessarily paths to files.
A call to `GetFileAttributesW` was added, ensuring we only resolve file paths.
## PR Checklist
* [x] Closes#12345
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* Paths with more than 1 whitespace resolve correctly ✅
* Paths with neighboring directories sharing a common prefix resolve correctly ✅
* Tests added ✅
## Summary of the Pull Request
After 'must', the verb is used without 'to'. Correct: "must" or "have to".
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Not required, only comment has been changed.
## Summary of the Pull Request
We no longer do anything when the rightmost breadcrumb is invoked
## PR Checklist
* [x] Closes#12325
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Tested manually, cannot repro #12325 anymore
The `x-generate` statement seems to have fallen apart somewhere and is no longer generating the valid list of languages for display. This hardcodes the list into the manifest to restore it, which is a valid option per the documentation.
We also hardcode the limited subset of languages into the Settings application because the main application supports fewer languages than we have been translated into for the shell extensions for Windows Explorer and Start Menu integration.
## PR Checklist
* [x] Closes#12351
* [x] I work here.
* [x] Manual tests below
## Validation Steps Performed
- [x] Clean built locally with `msbuild.exe openconsole.sln /p:Configuration=Release /p:Platform=x64 /p:WindowsTerminalBranding=Release /t:Terminal\CascadiaPackage /m /bl:log4.binlog` and checked that the `appxmanifest.xml` that popped out the other side contained the same languages that it used to contain.
- [x] Built in the release pipeline
- [x] Installed release and preview branded packages. Changed my machine language to Polish (pl-PL) which is not one of the fully localized languages, but is one of the limited ones. Checked the start menu and right-click menus and saw Polish text for Terminal and Terminal Preview. Checked the Settings page in our app and saw only the limited 14 language list for the application itself.
## Summary of the Pull Request
Reducing the `MinWidth` of a toggle switch means it no longer needs a negative margin to align it correctly
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Setting a different language no longer causes the toggle switch to fall out of the expander
We're investigating an issue where the build succeeded but something still got lost somewhere. If we had the binlogs, maybe we could diff and track it down faster.
## Summary of the Pull Request
This PR refactors the `ConGetSet` API, eliminating some of the bloat produced by the `DoSrvPrivateXXXX` functions, simplifying the method naming to more closely match the `ITerminalApi` interface, and making better use of exceptions for error conditions in place of boolean return values.
## References
This is another small step towards merging the `AdaptDispatch` and `TerminalDispatch` classes (#3849).
## PR Checklist
* [x] Closes#12193
* [x] Closes#12194
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #3849
## Detailed Description of the Pull Request / Additional comments
There are two main parts to this. The first step was to get rid of all the `DoSrvPrivateXXX` functions, and move their implementation directly into the `ConhostInternalGetSet` class. For the most part this was just copying and pasting the code, but I also fixed a couple of bugs where we were using the wrong output buffer (the global buffer rather than the one associated with the output handle), and got rid of some unnecessary calls to `GetActiveBuffer`.
The second part was to make better use of exceptions for error conditions. Instead of catching the exceptions at the `ConGetSet` level, we now allow them to fall through all the way to the `StateMachine`. This greatly simplifies the `AdaptDispatch` implementation since it no longer needs to check a boolean return value on every `ConGetSet` call. This also enables the getter methods to return properties directly instead of having to use a reference parameter.
## Validation Steps Performed
A number of the unit tests had to be updated to match the new API. Sometimes this just required changes to method names, but in other cases error conditions that were previously detected with boolean returns now needed to be caught as exceptions.
There were also a few direct calls to `DoSrvPrivateXXX` functions that now needed to be invoked through other means: either by generating an equivalent escape sequence, or calling a lower level API serving the same purpose.
And in the adapter tests, the mock `ConGetSet` implementation required significant refactoring to match the new interface, mostly to account for the changes in error handling.
We have to do this so that the store sees us as one thing ("Windows
Terminal") and the Start menu sees us as another ("Terminal").
The store will reject our package if the value we use for "DisplayName"
here doesn't match the store's "reserved names".
This value is *not used* by the start menu.
- The add new profile page now uses a dropdown rather than radio buttons
- Subheaders, breadcrumb bar, buttons etc are now all centralized when the window is maximized (so they all align with the expanders now)
- We no longer override the titlebar colors and instead use the xaml defaults (these still aren't great but at least we will get the fix automatically when it happens upstream)
- Breadcrumb bar no longer has a negative margin, so there's no weird overlap that happens when the window becomes small
- The number boxes for launch size and font size now use the `Inline` placement mode rather than compact, allowing modification to the number with fewer clicks
- Textboxes now have a greater max width so they can occupy more space in the expander if needed
## Summary of the Pull Request
When using a screen reader, the buttons on the "add a new profile" page were being read weirdly:
- "New empty profile" button read as "create new button button"
- "duplicate" button read as "duplicate button button"
It's generally standard to read out the text inside the button, so I did just that by reusing the existing localized resources. This also removes the redundant "button" that is said by the screen reader.
I also removed the unused `AutomationId` and unnecessary `Button.Content` tags.
#11156 can be closed upon validation by the accessibility team.
## Validation Steps Performed
✅ navigate to both buttons using Narrator; make sure it sounds right
## Summary of the Pull Request
Adds some polish around the navigators in the profile page (i.e. "appearance" and "advanced" button) by doing the following:
- use the localized resources for the pivot on the navigators
- simplify the navigators to be buttons instead of toggle buttons
Doing so has Narrator identify these as buttons rather than toggle buttons. So now Narrator won't say that the button is "off", which just makes more sense.
## Validation Steps Performed
✅ Narrator says "Advanced button" or "Appearance button" on the navigator
✅ The navigators look the same as before
Since we turned this feature on in windows, and it relies on _lying
about the contents of the registry_, Terminal needs to be in on the
joke.
This will need to be reverted and serviced if we choose not to ship like
this.
Fixes#12308
`IDWriteTextAnalyzer::GetGlyphs` is not enough to get a
`DWRITE_SHAPING_TEXT_PROPERTIES::canBreakShapingAfter`
value that works for combining diacritical marks.
This requires an additional call to `GetGlyphPlacements`.
This commit increases CPU usage for complex text by ~10%.
## PR Checklist
* [x] Closes#11925
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* ``echo "[e`u{0301}`u{0301}]"`` prints an "e" with 2 accents ✅
I added a condition to exclude some of the NuGet PGO stuff when there was no build mode, but appear to not have propagated any of it in the PGD merge job. This sets it to Optimize here so it'll go through.
## PR Checklist
* [x] Closes#12300
* [x] I work here.
* [x] It blends.
## Validation Steps Performed
* [x] Ran the PGO Instrument Phase
* [x] Ran the PGO Optimize Phase
Basically, this is the same as #12266, but for the `SearchBoxControl`. Trickily, the ControlCore is the one that knows if there were search results, but the TermControl has to be the one to announce it.
* [x] Will take care of #11973 once a11y team confirms
* [x] Tested manually with Narrator
* [x] Resolves a part of #6319, which I'm repurposing just to displaying the number of results in general.
* See also #3920
The pull request fixes the issue where "sizeof" parameter was use instead of "ARRAYSIZE".
## PR Checklist
* [x] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
This was a pretty straight forward issue, i just replace sizeof which gives the byte size with ARRAYSIZE which give the number of elements in the array.
## Summary of the Pull Request
This adds names to more of our focusable elements. This should be the rest of them that I missed in #11364
## References
* #9990: a11y megathread
* #11155: original version of this
## PR Checklist
* [x] Should take care of #11996 once confirmed
* [x] I work here
## Validation Steps Performed
Used Accessibility Insights to verify.
## Detailed Description of the Pull Request / Additional comments
There is one other weird bit. All the expanders that have content below the expander (not inline), show up as focusable, but don't have names. Even when I add names to them. I believe this is due to https://github.com/microsoft/microsoft-ui-xaml/issues/5820, which is fixed in https://github.com/microsoft/microsoft-ui-xaml/pull/6032, in https://github.com/microsoft/microsoft-ui-xaml/releases/tag/v2.8.0-prerelease.220118001. Unfortunately, we're on a 2.7 prerelease, so we don't have that fix yet. I may see how painful moving to that is, because we're gonna get another a11y ping as soon as 1.13 ships.
I pre-emptively added names to these guys in f7ba158dc, so that the new MUX should just fix this without any thinking on our part.
Introduced in #11416
We weren't using these macros for duplicating as well, so I forgot to duplicate a couple settings. This PR switches duplicating over to using the macros as well, which shou;d reduce future bugs.
Also adds notes to which properties are intentionally omitted from these macros.
* [x] closes#12265
* [x] Verified manually that #12120 still works as expected
Sorry for combining two fixes in one PR. I can separate if need be.
* [x] Closes#12276:
- `"bellSound": null` didn't work. This one was easier, and is atomically in bcc2ca04fc. Basically, we would deserialize that as an array with a single empty string in it, which we'd try to then play. I think it's more idomatic to have that deserialized as an empty array, which correctly falls back to playing the default sound.
* [x] Closes#12258:
- This one is the majority of the rest of the PR. If you leave the MediaPlayer open, then the media keys will _affect the Terminal_. More importantly, once the bell sounds, they'd replay the bell, which is insane. So the fix is to re-create the media player when we need it. We do this per-pane for simpler lifetime tracking. I'm not worried about the overhead of creating a mediaplayer here, since we're already throttling bells.
* Originally added in #11511
* [x] Tested manually
- Use [`no.mp4`](https://www.youtube.com/watch?v=x2w9TyCv2gk) for this since that's like, 17s long
- Checked that closing panes / the terminal while a bell was playing didn't crash
- Playing a bunch of bells at once works
- closing a pane stops the bell it's playing
- once the bell stops, the media keys went back to working for Spotify
* [x] I work here
## Summary of the Pull Request
Fix various things from the recent SUI changes
- The Appearance/Advanced toggle buttons now have a max width
- We don't need `Profiles.cpp` anymore
- The `Elevate` setting is now back in the SUI
- There is no longer an alignment difference between non-expander settings and expander settings
- Expander settings no longer require hitting `Tab` twice to get to them
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
According to https://github.com/microsoft/microsoft-ui-xaml/issues/1971, `PaneFooter` does not set the `SizeOfSet` or `PositionInSet` properties. However, `FooterMenuItems` does and works for our scenario. So we just replaced `PaneFooter` with `FooterMenuItems`.
Will handle #11154 upon verification from the accessibility team.
## Validation Steps Performed
✅ Verified using Accessibility Insights
✅ "Open Json File" button can still be invoked and keyboard navigated to as expected
There were a number of methods in the `IStateMachineEngine` interface
which controlled how the `StateMachine` interpreted escape sequences.
But essentially what it came down to was a bunch of a properties that
were always true for the `InputStateMachineEngine`, and always false for
the `OutputStateMachine` engine. To simplify the implementation, and
make things a little more efficient, I've now replaced all of those
virtual calls with a single boolean field in the `StateMachine` that is
initialised in the constructor.
I started by adding an `isEngineForInput` parameter to the constructor
to indicate the the type of engine being passed in. But to keep things
simple for callers, and I also then added a constructor without that
parameter, which could derive the value automatically based on the type
of the engine pointer.
Then in the `StateMachine` implementation, anywhere we were previously
calling `ParseControlSequenceAfterSs3`, `FlushAtEndOfString`,
`DispatchControlCharsFromEscape`, or `DispatchIntermediatesFromEscape`,
we now just reference `_isEngineForInput`. But I've also copied across
some of the original comments from those methods, to make it clear at
the point of usage why we have a difference in behavior for input and
output.
To make sure the unit tests would catch any problems, I hardcoded the
`_isEngineForInput` field to `false`, and confirmed that it broke a
bunch of input engine tests. Then I hardcoded it to `true`, and
confirmed that it broke a bunch of state machine and output engine
tests. With the `_isEngineForInput` set correctly, everything passed.
I also manually tested the various output edge cases that would be
effected by this code - C0 controls within an escape sequence, time
delays in the middle of an escape sequence, `SCS` character set
selection which requires intermediates following an escape, and a G3
single shift select which depends on `SS3`.
Closes#12254
I didn't have the tray icon enabled before I suppose, so this never got hit? Anyhow, we need to change where we look for the AppName. Otherwise we crash on launch 😨
* [x] fixes `main`
* [x] I work here
* regressed in #12264
* [x] Tested by: actually running the Terminal with this, it launched
## Summary of the Pull Request
**Note: This PR targets #11720**
Replaces our old pivot-style settings UI with a breadcrumb bar style, as per the windows 11 style guidelines. This required splitting `Profiles.xaml` into 3 separate files, `Profiles_Base.xaml` for general settings, `Profiles_Appearance.xaml` for appearance settings, `Profiles_Advanced.xaml` for advanced settings
The header in the navigation view is now a [BreadcrumbBar](https://docs.microsoft.com/en-us/windows/apps/design/controls/breadcrumbbar), which can be used to navigate back to `Profiles_Base` after moving into the advanced or appearance page (see GIF below)
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
This commit fixes the following issues when ClearType rendering is enabled:
* Colored glyphs are now drawn using grayscale AA, similar to all current
browsers. This ensures proper gamma correctness during blending in our
shader, while generally making no discernable difference for legibility.
* Our ClearType shader only emits fully opaque colors, just like the official
ClearType implementation. Due to this we need to force grayscale AA if the
user specifies both ClearType and a background image, as the image would
otherwise not be visible.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Grayscale AA when drawing emojis ✅
* Grayscale AA when using a background image ✅
## Summary of the Pull Request
Updates our SUI to follow the windows 11 style guidelines. Includes updating our setting containers to follow the 'expander' style.
## PR Checklist
* [x] Closes#10631
* [x] Closes#9978
* [x] Closes#9595
* [x] Closes#11231
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
This fixes a bug where several settings would not show the reset button. The root cause of this issue is two fold:
1. Hooking up `CurrentXXX`
- `GETSET_BINDABLE_ENUM_SETTING` was hooked up to the **settings** model profile object instead of the **view** model profile object. Since the settings model has no `PropertyChanged` system, any changes were directly being applied to the setting, but not notifying the view model (and thus, the view, by extension) to update themselves.
- This fix required me to slightly modify the macro. Rather than using two parameters (object and function name), I used one parameter (path to getter/setter).
2. Responding to the `PropertyChanged` notifications
- Now that we're actually dispatching the `PropertyChanged` notifications, we need to actually respond to them. This behavior was defined in `Profiles::OnNavigatedTo()` in the `PropertyChanged()` handler. Funny enough, that code was still there, it just didn't do anything because it was trying to notify that `Profiles::CurrentXXX` changed. This is invalid because `CurrentXXX` got moved to `ProfileViewModel`.
- The fix here was pretty easy. Just move the property changed handler to `ProfileViewModel`'s `PropertyChanged` handler that is defined in the ctor.
## References
Bug introduced in #11877
## Validation Steps Performed
✅ Profile termination behavior
✅ Bell notification style
✅ Text antialiasing
✅ Scrollbar visibility
Turns out, this bug only repros in Controls version 2. I'm not sure why, but it didn't repro only on main. So this fix does nothing until #11720 merges.
This PR prevents us from setting properties on the paste warning dialog unless we actually need to paste. 5f9c551b7e proves that settings these properties is what would cause the bug in the first place.
I went a step further and cleaned this up a bit. This was always a little weird, having to get the `BracketedPasteEnabled` for the active control on the UI thread before we actually display the warning. In the post-#5000 future where going back to the control like this would be a x-proc hop, I figured I should just skip that entirely and plumb the `BracketedPaste` state out in the initial request.
* [x] Closes#12202
* [x] I work here
* [x] No tests, but there's not a great place for a test like this
* [x] Doesn't affect docs
See also: #12241 which would introduce #12202 on its own.
Just like the shift+click and the alt click shortcuts, now Ctrl+Click will launch a new window with that profile, elevated.
I also found that the GenerateName wasn't updated for the elevate arg, so added that. I considered adding the following to the defaults, but decided against it. It added 10 more entries to the command palette that were only separated by the `elevate: true` param, so that didn't feel valuable. Those are posted below for posterity.
* [x] closes https://github.com/microsoft/terminal/projects/5#card-50759221
* [x] Tested manually
Includes a semi-related dead code removal for the `elevated` param for `_OpenNewWindow`, which didn't end up being used, and wouldn't work as intended anyways.
This should be most of the surfaces that we really care about for displaying "Windows Terminal". There's a pile of other references in code, but I couldn't find any other resources that mention it.
I left a lot of the references to Windows Terminal throughout. Seemed like it was fine to keep calling it that in most places, just these localized strings that are going to be displayed in the Shell that should be changed.
Rough compare:
The strings were also moved to the Context Menu resources file, because that's localized into more languages.
@DHowett we may want to spin a full build to make sure this works and I didn't miss anything
* [x] Closes#12091
There are a couple places where we now bail immediately on startup, if we think the window is going to get created without any tabs. We do that to prevent a blank window from flashing on the screen when launching auto-elevate profiles. Unfortunately, those broke defterm in a particularly hard to debug way. In the defterm invocation, there actually aren't any tabs when the app completes initialization. We use the initialization to actually accept the defterm handoff. So what would happen is that the window would immediately close itself gracefully, never accepting the handoff.
In my defense, #8514, the original auto-elevated PR, predates defterm merging (906edf7) by a few months, so I totally forgot to test this when rolling it into the subsequent iterations of that PR.
* Related to:
* #7489
* #12137
* #12205
* [x] Closes#12267
* [x] I work here
* [ ] No tests on this code unfortunately
* [x] Tested manually
Includes a semi-related code fix to #10922 to make that quieter. That is perpetually noisy, and when trying to debug defterm, you've only got about 30s to do that before it bails, so the `sxe eh` breaks in there are quite annoying.
This commit extracts DirectWrite related shader code into dwrite.hlsl
and adds support for ClearType blending.
Additionally the following changes are piggybacked into this commit:
* Some incorrect code around fallback glyph sizing was removed as
this is already accomplished by `CreateTextLayout` internally
* Hot-reload failed to work with dwrite.hlsl as the `pFileName`
parameter was missing
* Legibility of the dotted underline was improved by increasing
the line gap from 1:1 to 3:1
Part of #9999.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Types are clear ✅
When we gave users the ability to configure how the `SGR 1` attribute
should be rendered, we described those options as "intense is bright"
and "intense is bold". Internally, though, we still referred to the `SGR 1`
attribute as bold. This PR renames all occurrences of "Bold" (when
referring to the `SGR 1` attribute) as "Intense", so the terminology is
more consistent now.
PR #10969 is where we decided on the wording to describe the `SGR 1`
attribute.
Specific changes include:
* `TextAttribute::IsBold` method renamed to `IsIntense`
* `TextAttribute::SetBold` method renamed to `SetIntense`
* `VtEngine::_SetBold` method renamed to `_SetIntense`
* `ExtendedAttributes::Bold` enum renamed to `Intense`
* `GraphicsOptions::BoldBright` enum renamed to `Intense`
* `GraphicsOptions::NotBoldOrFaint` enum renamed to `NotIntenseOrFaint`
* `SgrSaveRestoreStackOptions::Boldness` enum renamed to `Intense`
## Validation Steps Performed
I've checked that the code still compiles and the unit tests still run
successfully.
Closes#12252
## Summary of the Pull Request
Expands on #9582. If the command palette finds results, the screen reader says "Suggestions available".
Makes the scenario mentioned in #7907 work.
This is sufficient for various reasons:
1. According to the bug report, saying that suggestions are available is sufficient
> Screen reader should provide the results info on searching commands like 10 results found or suggestions available when there are any search results (Source: #7907)
2. This is common practice. Settings app and XAML Controls Gallery do this for their search box.
Also, the user should be able to know how many results were found by tabbing/selecting a result item. When this is done, the screen reader will use `SizeOfSet` and `PositionInSet` to announce how many results were found and which one we're currently on.
## Validation Steps Performed
Verified this behavior using Narrator.
Verified it matches the behavior of the Settings app and the XAML Controls Gallery.
This makes the scenario mentioned in #8480 work. It's maybe not as holistic a solution as we'd like, but it definitely works.
Tested both with Narrator, and using the TabView scroll handles to get tab focus into the tab row manually
* [x] Closing the _active_ tab with <kbd>Ctrl+Shift+w</kbd> works (not the `TabViewItem` that has focus, but that's how Edgium works so that seems fine)
* [x] Opening a tab with <kbd>Ctrl+Shift+t</kbd> works
* [x] Opening the cmdpal with <kbd>Ctrl+Shift+p</kbd> works
* [x] Will take care of #8480 once we get the a11y team to validate
* [x] I work here
#### Notes:
None of
```xaml
PreviewKeyDown="_KeyDownHandler"
KeyDown="_KeyDownHandler"
KeyUp="_KeyDownHandler"
```
On the TerminalPage directly seem to fire when the focus is in the `TabViewItem` or the New Tab flyout. But they fire just fine when focus is in the `TermControl`. Interesting, because you'd think that the `TermControl` would have already handled the key...
## Summary of the Pull Request
Makes `Model::DefaultTerminal` an `IStringable`, which presents it as a string, when possible. This enables text search for defterm's setting. This also enables screen readers to identify the combo box items by their text content (app name, author, and version) as opposed to being treated as an item containing more text. As a part of that, I cleaned up the UIA tree to treat the item's name as "\<name\>, \<author\>, \<version\>". This is consistent with how the Settings App presents installed apps in Apps > Installed apps.
#11251 will be resolved upon verification by the accessibility team.
## Validation Steps Performed
Verified using Narrator and Accessibility Insights.
The PGO helpers NuGet had the Y2K22 bug. This receives and integrates the updated package in our project to restore NuGet functionality.
## PR Checklist
* [x] Closes#12261
* [x] I work here
* [x] If it builds it sits.
## Validation Steps Performed
* [x] Build new PGO instrument data with this pipeline update: https://dev.azure.com/microsoft/Dart/_build/results?buildId=44304850&view=results
More fallout from the settings refactor. Probably because testing on a Windows
10 device is hard, because you actually need a physical machine to get acrylic
to behave correctly.
Basically, the code is simpler now, but we missed the windows 10 only edge case
where acrylic can get turned on, but we forget to enable the acrylic brush, so
it just stays off.
Refer to #11619 where this regressed, and #11643, #12229, because this is just a
hard problem apparently
* [x] Closes#11743. Technically OP is complaining about behavior that's
by-design, but it made me realize this regressed in 1.12.
* [ ] No tests on this part of the `TermControl` unfortunately.
* [x] Hauled out my old Win10 laptop to verify that opacity works right:
- [x] A fresh profile isn't created with any opacity
- [x] Mouse wheeling turns on acrylic
- [x] Using `opacity` only in the settings still stealthily enables acrylic
This will turn the feature on always from this point on. That means 1.13 Stble
would be the first Stable release to have this feature (unless we cherry-pick
this to 1.12 stable, which we may)
* [x] Closes#12220
* [x] I work here
Manifest validation won't accept migration/initialization of HKCU-based registry keys anymore. The enforcement scripts says that they should be defined in code instead. So here it is: defined in code insteead.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 67c720b628de4acefbc381891b7e7d29d387038e
Related work items: MSFT-37867666
[Git2Git] Merged PR 6881093: BUILD FIX: Reintroduce BOM to conhost manifests
Related work items: MSFT-37882151
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev b6f388b08b0b431ffc5663fe27eef260688febd6
I can find the commit where this regressed tomorrow if needed. In #10685 we stopped emitting these notifications while we were deferring cursor drawing. We however forgot to send the notification at the end of the defer.
This likely has a small perf impact. We however do need these cursor position events for IMEs to be able to track the cursor position (and low key for #10821)
* [x] regressed in #10685
* [x] Closes#11170
* [x] I work here
* [x] Tests added
This gets rid of warnings like
```
NU1102: Unable to find package Microsoft.NETCore.App.Host.win-x64 with version (= 3.1.21)
- Found 1 version(s) in TerminalDependencies [ Nearest version: 3.1.18 ]
```
Technically, there's a `NETCore.App.Host.3.1.21` that's out now. We _could_
migrate to that, but then we'd have to make sure to manually re-upload that
nuget package to our nuget feed, and then we'd still get this warning the
next time that package is updated.
Theoretically, there's a 6.x version too, but considering this is a debugging
tool, we don't care all that much.
* [x] I work here
* [x] Discussed this with Dustin
* [x] Gets rid of a SUPER TRIVIAL warning.
Since `AtlasEngine` prefers drawing without alpha for performance reasons,
calls to `EnableTransparentBackground` require a draw cycle.
This PR makes `Renderer::_NotifyPaintFrame` public and calls it.
Related to #9999.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Open Windows Terminal command palette
* Choose "Set background opacity..."
* Cycling through the items without selecting one
changes background opacity immediately ✅
`Renderer` owns the information of the hovered interval in `_hoveredInterval`
and provides no access to this information. We can only infer it from calls
to `PaintBufferGridLines`, if we're given the request to draw an underline
despite the previous call to `UpdateDrawingBrushes` not specifying it.
While it'd be possible to fix this and pass the underline flag to
`UpdateDrawingBrushes`, I personally consider this aspect of `Renderer` to be
a "leaky abstraction" as it's inherently incompatible with any engine not
working like `DxEngine`, such as the `AtlasEngine`. It's likely more
worthwhile to fundamentally change the `Renderer` architecture in the future.
## PR Checklist
* [x] Closes#11871
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Launch pwsh.exe
* Hyperlinks are underlined when hovered ✅
* Launch WSL / bash
* Run `printf '\e]8;;http://example.com\e\\This is a link\e]8;;\e\\\n'`
* Hyperlink is underlined when hovered ✅
Less "merge conflict" and more "something that got missed in a merge".
The offending commits are
* 68ab807
* b3fab51
The Fuzzer build doesn't run on PR, so it didn't notice this couldn't build.
@carlos-zamora as an FYI
This commit also introduces a check that we are in an interactive
session before we perform handoff, so as to not break service accounts.
It also adds some tracing.
The only way to notice that LeaveCriticalSection() was called more
often than EnterCriticalSection() is by calling EnterCriticalSection()
again in the future, which will then deadlock.
Since this bug occurs on exit it wasn't noticeable with the old console lock.
With the new, stricter ticket lock this bug causes a fail-fast exit.
## PR Checklist
* [x] Closes#12168
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Launch and then exit Windows Terminal
* OpenConsole cleanly exits ✅
This is a collection of fixes:
* dd213a5c18: This was a crash I discovered while investigating. Probably not the root cause crash, but a crash nonetheless.
* ba491212afcbafdabc89d88b78f1dc5076dea0c3...0b18ae4ed73cbb15452c7c15aefa0c2671db9605: A collection of fixes to _not_ create the window when we're about to handoff each of the new tabs, panes, to an elevated window. That should prevent us from starting up XAML at all, which should take care of #12169. Additionally, it'll prevent us from restoring the unelevated windows, which should resolve#12190
* The remainder of the commits where fixes for other weird edge cases as a part of this. Notably:
* ff72599189: Autopromote the first `split-pane` to a new tab, in the case that it's preceded with only `new-tab` actions that opened elevated windows.
#### checklist
* [x] I work here
* [x] Docs are fine
* [x] Closes#12190
* [x] Closes#12169
This commit correctly restores the previous opacity when the command palette
preview is cancelled. It includes an additional change in order to make the
`AdjustOpacity` setter consistent and symmetric with the `Opacity` getter.
## PR Checklist
* [x] Closes#12228
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Open Windows Terminal command palette
* Choose "Set background opacity..."
* Cycle through the items without selecting one
* Press Escape
* Previous opacity is restored ✅
This minor change makes it possible to hot-reload the AtlasEngine shaders under
Windows Terminal. Launching an UWP application from Visual Studio doesn't
necessarily result in a working directory inside the project folder,
which makes relative file paths impractical. While the `__FILE__` macro is
compiler dependent it works under our build setup with MSVC at least.
## Validation Steps Performed
* Shader hot-reloading works under Windows Terminal ✅
With the introduction of a common `RenderSettings` class in 62c95b5,
`PaintBufferGridLines` was now uniformly called with a proper alpha-less
`COLORREF` argument. This commit crudely fixes the issue by forcing
the color to be fully opaque in the `DxEngine` class.
## PR Checklist
* [x] Closes#12223
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Launch pwsh.exe
* Hyperlinks get underlines on hover ✅
When title updates are forwarded from the host to the client terminal,
they're passed over conpty in an `OSC 0` sequence. If there are any
control characters embedded in that title text it's essential they be
filtered out, otherwise they are likely to be misinterpreted by the VT
parser on the other side. This PR fixes a case where that sanitization
step was missed for titles initialized at startup.
Originally the sanitization step was handled in `DoSrvSetConsoleTitleW`,
which catches title changes made via VT escape sequences, or through the
console API, but missed the title initialization at startup. I've now
moved that sanitization code into the `CONSOLE_INFORMATION::SetTitle`
method, which should cover all cases.
This sanitization is only meant to occur when in "pty mode", though,
which we were originally establishing with an `IsInVtIoMode` call.
However, `IsInVtIoMode` does not return the correct result when the
title is set at startup, since the VT I/O thread is not initialized at
that point. So I've instead had to change that to an `InConptyMode`
call, which determines the conpty state from the launch args.
## Validation Steps Performed
I've manually confirmed the test case described in issue #12206 is now
working correctly.
However, the change to using `InConptyMode` caused some of the unit
tests to fail, because there isn't a real conpty connection when
testing. Fortunately there are some `EnableConptyModeForTests` methods
used by the unit tests to fake the appearance of a conpty connection,
and I just needed to add some additional state in one of those methods
to trigger the correct `InConptyMode` response.
Closes#12206
The atlas engine currently applies colors and flags (underline,
overline, ...) based on the first column in a glyph; this means that
every member of a ligature is drawn in the same color with the same
underline style.
This commit makes us look up cell color and flags based on the actual
buffer column it represents, so that ligatures can be printed in
multiple colors and with different underline styles.
## Summary of the Pull Request
This PR sets up a OneFuzz pipeline on Azure DevOps for our repo.
## Detailed Description of the Pull Request / Additional comments
- fuzz.yml: defines the stages and pipeline for ADO
- build-console-fuzzing: builds the solution in the Fuzzing configuration
- build-console-steps: omits a few tasks that are unnecessary for this build configuration
- sln and vcxproj changes: the solution wasn't building in CI. This makes sure that's fixed.
- fuzzing.md: a short guide on how to get OneFuzz set up and add a new fuzzer
## References
#7638
[Git2Git] Merged PR 6814613: conhost FT: skip a test that fails on OneCore
Fixes MSFT-33720056
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 6410311eee21e9ce147464af89d35f3569d4d2b9
## Summary of the Pull Request
Disables the automatic adjustment of indistinguishable text (added in #11095) because of the concerns brought up in #11917. Also, the setting is hidden in the SUI for as long as this feature remains disabled.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
Prevents a potential null pointer crash in the export buffer action.
## PR Checklist
* [x] Closes#12170
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Manually tested.
This commit replaces the console lock was replaced with a fair ticket
lock implementation, as only fair locks guarantee us that the renderer
(or other parts) can acquire the lock, once the VT parser has finally
released it.
This is related to #11794.
## Validation Steps Performed
* No obvious crashes ✅
* No text/VT performance regression ✅
* Cursor blinker starts/stops on focus/defocus of the window ✅
## Summary of the Pull Request
This PR moves the color table and related render settings, which are common to both conhost and Windows Terminal, into a shared class that can be accessed directly from the renderer. This avoids the overhead of having to look up these properties via the `IRenderData` interface, which relies on inefficient virtual function calls.
This also introduces the concept of color aliases, which determine the position in the color table that colors like the default foreground and background are stored. This allows the option of mapping them to one of the standard 16 colors, or to have their own separate table entries.
## References
This is a continuation of the color table refactoring started in #11602 and #11784. The color alias functionality is a prerequisite for supporting a default bold color as proposed in #11939. The color aliases could also be a way for us to replace the PowerShell color quirk for #6807.
## PR Checklist
* [x] Closes#12002
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
In addition to the color table, this new `RenderSettings` class manages the blinking state, the code for adjusting indistinguishable colors, and various boolean properties used in the color calculations. These boolean properties are now stored in a `til::enumset` so they can all be managed through a single `SetRenderMode` API, and easily extended with additional modes that we're likely to need in the future.
In Windows Terminal we have an instance of `RenderSettings` stored in the `Terminal` class, and in conhost it's stored in the `Settings` class. In both cases, a reference to this class is passed to the `Renderer` constructor, so it now has direct access to that data. The renderer can then pass that reference to the render engines where it's needed in the `UpdateDrawingBrushes` method.
This means the renderer no longer needs the `IRenderData` interface to access the `GetAttributeColors`, `GetCursorColor`, or `IsScreenReversed` methods, so those have now been removed. We still need access to `GetAttributeColors` in certain accessibility code, though, so I've kept that method in the `IUIAData` interface, but the implementation just forwards to the `RenderSettings` class.
The implementation of the `RenderSettings::GetAttributeColors` method is loosely based on the original `Terminal` code, only the `CalculateRgbColors` call has now been incorporated directly into the code. This let us deduplicate some bits that were previously repeated in the section for adjusting indistinguishable colors. The last steps, where we calculate the alpha components, have now been split in to a separate `GetAttributeColorsWithAlpha` method, since that's typically not needed.
## Validation Steps Performed
There were quite a lot changes needed in the unit tests, but they're mostly straightforward replacements of one method call with another.
In the `TextAttributeTests`, where we were previously testing the `CalculateRgbColors` method, we're now running those tests though `RenderSettings::GetAttributeColors`, which incorporates the same functionality. The only complication is when testing the `IntenseIsBright` option, that needs to be set with an additional `SetRenderMode` call where previously it was just a parameter on `CalculateRgbColors`.
In the `ScreenBufferTests` and `TextBufferTests`, calls to `LookupAttributeColors` have again been replaced by the `RenderSettings::GetAttributeColors` method, which serves the same purpose, and calls to `IsScreenReversed` have been replaced with an appropriate `GetRenderMode` call. In the `VtRendererTests`, all the calls to `UpdateDrawingBrushes` now just need to be passed a reference to a `RenderSettings` instance.
This commit makes the following changes to `til::point/size/rectangle`
for the following reasons:
* Rename `rectangle` into `rect`
This will make the naming consistent with a later `small_rect` struct
as well as the existing Win32 POINT/SIZE/RECT structs.
* Standardizes til wrappers on `int32_t` instead of `ptrdiff_t`
Provides a consistent behavior between x86 and x64, preventing accidental
errors on x86, as it's less rigorously tested than x64. Additionally it
improves interop with MIDL3 which only supports fixed width integer types.
* Standardizes til wrappers on throwing `gsl::narrow_error`
Makes the behavior of our code more consistent.
* Makes all eligible functions `constexpr`
Because why not.
* Removes implicit constructors and conversion operators
This is a complex and controversial topic. My reasons are: You can't Ctrl+F
for an implicit conversion. This breaks most non-IDE engines, like the one on
GitHub or those we have internally at MS. This is important for me as these
implicit conversion operators aren't cost free. Narrowing integers itself,
as well as the boundary checks that need to be done have a certain,
fixed overhead each time. Additionally the lack of noexcept prevents
many advanced compiler optimizations. Removing their use entirely
drops conhost's code segment size by around ~6.5%.
## References
Preliminary work for #4015.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
I'm mostly relying on our unit tests here. Both OpenConsole and WT appear to work fine.
In previous releases, we had the commandlines for the Command Prompt and PowerShell profiles unqualified, as `cmd.exe` and `powershell.exe`. This was bad - theoretically, that would have preferred the cmd that was in the CWD over the one in System32. Or, something could insert itself into the path, and you'd end up with a malicious `cmd.exe` before the real one.
In #11437, we made sure that the `userDefaults` are initiated with the fully qualified paths. However, that didn't fix the issue for folks who already had settings files.
In an effort to better prevent this kind of badness, if we see a profile _with a default profile guid_, AND the unqualified version of the path, then we'll stealth replace it with the fully qualified one.
* Related to #11437
* [x] fixes#12126
* [x] Tests added
Adds an action which can be used to change the opacity at runtime. This is a follow up to some of the other work I had been doing around opacity and settings previewing at the end of the year.
> edit: pseudo-spec
>
> * `adjustOpacity`:
> * `"opacity"`: (**required**) an integer number to set the opacity to.
> * `"relative"`: (defaults to `true`)
> * If false, set the opacity to the given value, which should be between [0, 100].
> * If true, then use `opacity` as a relative adjustment to the current opacity. So the implementation would get the current opacity for this pane, then add this action's opacity to that value. Should be between [-100, 100]
>
> This would allow both setting exactly 25% opacity with an action, and binding an action that increases/decreases the opacity one {amount}
It's preview-able too, which is neat.
* [x] Closes#11205
* [x] I work here
* [x] Docs updated: https://github.com/MicrosoftDocs/terminal/pull/477
When I added these macros in #11619, the real purpose was to make sure we don't forget to add new settings to these test mocks as well. However, I totally forgot to convert those. I guess that happens with a 1300 line diff ¯\\\_(ツ)_/¯
* [x] Is a codehealth thing
* [x] I work here
* [x] tests still pass
This was a simple oversight. No user profile ever has `connectionType` set, because why would they. So even for the Azure Shell, which needed this, the check would fail and we'd forget to duplicate the connectionType to the new profile.
* [x] I work here
* [x] Closes#12120
* [x] Tested manually
Title says it all. This is on by default, and we've committed to keeping it around. Having a velocity flag for it is redundant now.
* [x] Closes#11454
* [x] I work here
This adds an action for the context menu entry we added in #11062. That PR added support for exporting the buffer, exclusively through the tab item's context menu. This adds an action that can additionally be bound, which also can export the buffer to a file. This action accepts a `path` param. If empty/ommitted, then the Terminal will prompt for the file to export the buffer to.
* Does a part of #9700
* Spec in #11090, but I doubt this is contentious
* [x] This will satisfy #12052
* [x] I work here
* [x] docs added: https://github.com/MicrosoftDocs/terminal/pull/479
## Summary of the Pull Request
This is the resurrection of #8514 and #11310. WE determined that we didn't want to do #11308 after all, so this should be profile auto-elevation, without the warning.
This PR adds two features:
* the `elevate: bool` property to profiles
- If the user is running unelevated, **and** `elevate` is set to `true`, then instead of opening a new tab, we'll open an elevated Terminal window with the profile.
- Otherwise, we'll just open a new tab in the existing window. This includes cases where the window is elevated, and the profile is set to `elevate:false`. `elevate:false` basically just means "do nothing special with me".
* the `elevate: bool?` property to `NewTerminalArgs` (`newTab`, `splitPane`)
- This allows a user to create an action that will elevate the profile, even if the profile is not otherwise set to auto-elevate.
- `elevate:null` (_the default_) does not change the profile's elevation status. The action will use whatever is set by the profile.
- `elevate:true` will attempt to auto-elevate the profile
- `elevate:false` will do nothing special.
## References
* #5000 for obvious reasons
* Spec'd in #8455
## PR Checklist
* [x] Closes#632
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - sure does, but that'll come all at the end.
## Detailed Description of the Pull Request / Additional comments
After playing with de-elevation a bit, it turns out it behaves weirdly with packaged applications. I can try and ask `explorer.exe` to launch the process on our behalf. However, if the thing we're launching is an execution alias (`wt.exe`), and we're elevated, then the child process will _still launch elevated_.
There's also something super BODGEY at work here. `ShellExecute` is the function we use to ask the OS to elevate something for us. But `ShellExecute` needs to be able to send a window message to the process that called it (if the caller was a WINDOWS subsystem application). So if we die immediately after calling `ShellExecute`, then the elevated process never actually spawns - sad. So we're adding a helper process, `elevate-shim.exe`, that lives in our process. That'll be the one that actually calls `ShellExecute`, so that it can live for the duration of the UAC prompt.
## Validation Steps Performed
* Ran tests
* Opened a bunch of terminal tabs at various different elevation levels
* opened new splits too
* In the defaults (base layer) as well, for madness
Some settings to use for testing
<details>
```jsonc
"keybindings" :
[
////////// ELEVATION ///////////////
{ "keys": "f1", "name": "ELEVATED TAB", "icon": "\uEA18", "command": { "action": "newTab", "elevate": true } },
{ "keys": "f2", "name": "ELEVATED, Color", "icon": "\uEA18", "command": {
"action": "newTab", "elevate": true, "commandline": "PowerShell.exe", "startingDirectory": "C:\\Windows", "tabColor": "#bbaa00"
} },
{ "keys": "f3", "name": "unelevated ELEVATED", "icon": "🙃", "command": {
"action": "newTab", "elevate": false, "profile": "elevated cmd"
} },
//////////////////////////////
],
"profiles":
{
"defaults":
{
"elevate": true,
},
"list":
[
{
"hidden":false,
"name" : "cmd",
"commandline" : "cmd.exe",
"guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
"startingDirectory" : "%USERPROFILE%",
"opacity" : 20
},
{
"name" : "the COOLER cmd",
"commandline" : "c:\\windows\\system32\\cmd.exe",
"startingDirectory" : "%USERPROFILE%",
},
{
"name" : "the sneaky cmd",
"commandline" : "c:\\windows\\system32\\cmd.exe /k echo sneaky sneaks",
"startingDirectory" : "%USERPROFILE%",
},
{
"name": "elevated cmd",
"commandline": "cmd.exe /k echo This profile is always elevated",
"startingDirectory" : "well this is garbage",
"elevate": true,
"background": "#9C1C0C",
"tabColor": "#9C1C0C",
"colorScheme": "Desert"
},
{
"name": "unelevated cmd",
"commandline": "cmd.exe /k echo This profile is just as elevated as you started with",
"elevate": false,
"background": "#1C0C9C",
"tabColor": "#1C0C9C",
"colorScheme": "DotGov",
"useAcrylic": true
},
]
```
</details>
Also try:
* `wtd nt -p "elevated cmd" ; sp -p "elevated cmd"`
* `wtd nt -p "elevated cmd" ; nt -p "elevated cmd"`
This was merged manually via
```
git diff dev/migrie/f/non-terminal-content-elevation-warning dev/migrie/f/632-on-warning-dialog > ..\632.patch
git apply ..\632.patch --ignore-whitespace --reject
```
Revert "Fix environment block creation (#7401)"
This reverts commit 7886f16714.
(cherry picked from commit e46ba65665)
Revert "Always create a new environment block before we spawn a process (#7243)"
This reverts commit 849243af99.
(cherry picked from commit 4204d2535c)
(cherry picked from commit f8e8572c23)
(cherry picked from commit cb4c4f7b73)
(cherry picked from commit afb0cac3e3)
(cherry picked from commit b25dc74a1d)
(cherry picked from commit 5f7c66bc0c)
Fixes#7418
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- add suport for light backgrounds
- make color tool use 90-97 and 100-107 sequences for fg/bg
- fix loops stop condition
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
additional improvements that I've seen while working on #12087
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This commit fixes the compilation under VS 2022.1 and clang, by evaluating a
`static_assert(false)` safety check only when the template is instantiated.
This is achieved by making the assertion depend on the template parameter.
## Validation Steps Performed
* Host.EXE compiles under VS 17.1.0 Preview 3.0 (32110.40.d17.1) ✅
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add an action to restore the last closed pane or tab. When all you have is restoring last sessions everything looks like a `std::vector<ActionAndArgs>`.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#9800
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Partially closes#960
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
- Keep a buffer of panes/tabs that were closed recently in the form of a list
of actions to remake it.
- To restore the pane or tab just run the list of actions.
- This (deliberately) does not restore the exact visual state as focus could
have changed / new panes might have been created in the mean time. Mostly
this means that restoring a pane will just attach to the currently focused
pane instead of whatever its old neighbor was.
- Buffer is limited to 100 entries which might as well be "infinite" by most reasonable
standards, but prevents complaints about there being memory leaks in long running
instances.
- The action name could be potentially changed, but it felt unwieldy as "restoreLastClosedPaneOrTab".
- This does not handle restoring the actual running contents of a pane.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Colortool: add support for truecolor fg/bg and cursor
## PR Checklist
* [x] Closes#1160
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
- add support to RGB values in FOREGROUND/BACKGROUND keys of ini colorschemes.
- add support to parse and change cursor color
- add support for true rgb fg/bg to colortool, will only work for vt and default console as there's no way to set rgb values through the win api.
- this pr does not add support for exporting an colorscheme with rgb fg/bg
- this is my first time using C# so any feedback is appreciated.
## Validation Steps Performed
manual testing
This PR does two things, which are best viewed as atomic commits:
* e64ae7d: Move the `MangleStartingDirectoryForWSL` to `types/utils`. It doesn't _really_ make sense in `types`, since it's only really being used in a single place in TerminalConnection. However, TerminalConnection doesn't have tests, and types does. So this commit move the function there, and adds tests from #9223 to the types tests.
* 42036c5: This actually fixes the bug in #11994. Unfortunately, `wsl --cd` will try to treat paths starting with `//wsl$` as a linux-relative path, when the user almost certainly wanted a windows-relative one. So we'll mangle that back into a path that looks like `\\wsl$\foo\bar`.
* [x] closes#11994
* [x] I work here
* [x] tests added 🎉
As discussed. We're not going to be able to consistently get bugfixes below Vb anymore, so let's leave that as the MinVersion, so we can start adding features that depend on those bugfixes.
* [x] Closes#11371
I'm not 100% sure that this is the right solution, but it does seem to work well enough. This is unfortunately a classic heisenbug. It was already hard enough to repro originally, but attaching a debugger made it totally impossible to hit.
My theory is that it's possible for the GotFocus event to fire before the LayoutUpdated event does. If that were to occur, then we'd try to turn on the cursor timer before it exists, gracefully do nothing, then create the timer. In that case, we'd never get a subsequent message to start the blinking.
I tested that theory by just initializing the cursor blinker to our `_focused` state. In that case, if the control has already been focused at the time of the LayoutUpdated event, then we can init the cursor to the correct state. Testing that out, I couldn't once get this to repro, which makes me think this works. I've opened some 900 (<sup>hyperbole</sup>) tabs now, so I'm pretty confident I'd have seen it by now.
* Regressed in #10978
* [x] fixes#11411
* [x] I made sure I didn't regress #6586
* [x] I work here
This commit adds additional information to the persisted window layouts.
- Runtime tab titles
- Focus, Maximized, and Fullscreen modes.
Also,
- Adds actions for Set{Focus,FullScreen} that take a boolean
to work in addition to the current Toggle{Focus, Fullscreen} actions.
- Adds SetMaximized that takes a boolean.
This adds the capability to maximize (resp restore) a window using
standard terminal actions.
This also involves hooking up a good amount of state tracking between
the terminal page and the window to see when maximize state has changed
so that it can be persisted.
- These actions are not added to the default settings, but they could be.
The intention is that they could assist with automation (and was originally)
how I planned on persisting the state instead of augmenting the LaunchMode.
- The fullscreen/maximized saving isn't perfect because we don't have a
way to save the non-maximized/fullscreen size, so exiting the modes
won't restore whatever the previous size was.
References #9800Closes#11878Closes#11426
This PR makes sure profile appearances in SUI set both focused and unfocused members of the control. I totally forgot about the fact that the control is _unfocused_ in the SUI. Verified manually, I didn't think it deserved a gif.
* regressed in #11619
* Closes#11893
* I work here
This commit removes some pure virtual base classes from conhost,
found with the help of SizeBench. This reduces binary size by 5kB.
The reduction in code size however is the main benefit of this.
Additionally this fixes a mysterious, undebuggable crash in
~RenderThread(), caused by a Control Flow Guard failure when
the class was destroyed over its IRenderThread interface.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Printing text works ✅
* Printing VT works ✅
* Performance is alright ✅
When editing colors in the conhost properties dialog, and you select an
item to update (e.g. Screen Text, or Screen Background), the associated
color swatch for that item would be highlighted, but the RGB color
values weren't updated to reflect that selection. This PR fixes it so
the RGB values are now correctly refreshed.
I just copied the three lines used up update the color value fields from
the code that handles changes to the color swatch selection. I didn't
think it was worth pulling those three lines out into a separate
function.
## Validation Steps Performed
I've manually verified that the RGB values are now refreshed correctly
when selecting a color item to update.
Closes#1220
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- Settings > Add a new profile
- Disable "Duplicate" button until a profile is selected
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Should take care of #12056, once we can get a build to the a11y team (MAINTAINER EDIT: we unfortunately can't just say "closes #foo" for issues like this one, we need another team to validate the following build.)
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
Adds a per-profile setting for setting the audio sound for the bell. The setting is `bellSound`, it accepts a path. We'll use the file at that path as the sound for the bell. If it doesn't exist, then oh well, so sound for you.
It'll also secretly accept an array of paths. If you provide an array, it will pick one at random.
## PR Checklist
* [x] Closes#8366
* [x] I work here
* [ ] Tests - lol this is the hackathon, I'm just messing around
* [ ] Requires documentation to be updated
## Validation Steps Performed
I'm not suggesting that anyone go to [this post](https://www.reddit.com/r/untitledgoosegame/comments/d77le4/honk_ringtones/) and download a zip full of `honk.mp3`s. I'm definitely not suggesting you add it to your settings like
```jsonc
"bellSound": [
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk1.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk2.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk3.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk4.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk-muffled1.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk-muffled2.mp3",
"C:\\Users\\migrie\\Downloads\\memes\\honks\\Honk-muffled3.mp3"
]
```
No, don't do that.
https://user-images.githubusercontent.com/18356694/137389503-91e43dba-8f7b-4078-9d35-23ceb2ac9432.mp4
* [x] It surprisingly works elevated
* [x] We should probably accept env vars in these paths
* [x] We may only want one `MediaPlayer` per terminal, rather than one per pane
* [ ] We may want to validate the paths, and discard ones that don't exist.
* [x] alternatively, _meh_
Enables a series of tasks run against our release pipeline that validate the security and compliance status of our code in an automated fashion. These checks include:
- Component Governance - (we had this one, it was moved to here) - Inventories open-source components used in our build
- PREfast - C/C++ static analysis for common code errors and exploits
- Policheck - Searches source code, comments, and text for words that could be sensitive legally, culturally, or geopolitically
- Credscan - Looks for credentials left behind in the code/documents and build output files
- BinSkim - Searches for common vulnerabilities in binaries
- CheckCFlags - Validates that compile/link flags match the policies recommended by Windows engineering for inclusion into the OS product image
- CFGCheck/XFGCheck - Validates that the CFG and/or XFG settings were enabled at compile and link time to guard against control flow attacks.
We're also required to run the SBOM one, but that was done in a separate PR and we're still pending the detectors being updated.
## References
- #11948 - Move from CFG to XFG once XFG task folks get back to me on it
- #11949 - Enable bug filing for SecComp tasks
- #11950 - Bulk process bugs filed by SecComp tasks
- #11947 - Validate SBOM when checkers come online
## Checklist
- [x] - Fixes#10735
- [x] - Fixes#908
- [x] - I work here
- [x] - If it fits, it sits.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
fix#11432
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11432
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
compiled and verified that "\~" , "/usr/bin" , "~/.config" and "/" as stating directory didn't get relative path resolve
verified that '.' did
Ensures the PowerShell Core profile's commandline is quoted. This allows
the profile to work correctly if there are files in place on the machine
(e.g. one called `C:\Program`) that prevent `CreateProcess()` from
invoking the un-quoted commandline.
## Validation Steps Performed
Created a file called `C:\Program` and opened the PowerShell profile in
terminal.
Closes#11717
Adds the Ansi-Color tool, completing #6470.
What started out as an experiment to see the support of ANSI support to
conhost, I wanted to write a Windows equivalent of Daniel Crisman's
[BASH script on tldp.org]. I didn't like how the BASH script hard coded
in whitespace and I thought Windows could do better. I applied
techniques to speed up the execution and tried to use the Command Script
batch language in ways that pushed the limits for what I thought it
could do. Running this from withing PowerShell, `&cmd /c ansi-color.cmd`,
I found out that the active code page is already 65001, but when ran
from a Command Prompt, the active code page depends on the regional
settings and I would have a dependency on CHCP to detect the active code
page, change to 65001 if necessary, and restore the previous code page
after running. I found it useful for designing color schemes and writing
shaders, and I started using an earlier version for logging bugs.
Initially it was a single script which I would dump every SGR
combination I could think of, and many which weren't implemented yet,
but as I was looking at other tools which had been written I wanted to
mimic the same output so I could do side-by-side comparisons. First I
wrote `crisman.def` and then `colortool.def`. So I had to align text.
Then output was slow for big tables so I wrote to an outbuffer and made
use of macros. I wanted to handle flags instead of needing to change
settings every time, so I added argument parsing and loading external
files.
It's a batch file that has some really useful purposes and does nothing
I've seen before.
I've ran every definition in a Command Prompt, with CP 437 and CP 65001
to make sure it works. Posted as a Gist on my account for about year, a
Portuguese (Brazilian as I recall), speaking user tried the Gist and it
was failing because CHCP is localized. I've taken an approach to try and
make it work for different localizations, but this is a potential
problem. I also ran every definition in PowerShell 7, shelling down to
`cmd` to actually run it. Lastly, I went through using the flags and
made sure that help would be shown. Error messages generate error levels
when the script exits, so those could be used to use this in an
automated test and catch if there was a problem with the script
executing. It won't be able to validate if the generated output shows
correctly, but it would fail if a definition file is missing or if it
needed to switch to Unicode and wasn't flagged or configured to do so.
For trying to build the table stub and headers, there is some debug code
which will output what was parsed. This is the last debug code in the
script itself, but I found it to be useful at times, so there is a
configuration setting which can turn that debug output back on.
Technically there is also a debug statement to break after adding the
macros and parsing the arguments, but before it does any configuration
changes, changes the code page, or anything. This was useful for making
changes to macros and being able to test them as well as making sure
that flags and arguments are parsed correctly. It was a rather cryptic
discovery to call `cmd /c exit -1073741510` to break out, so in part
that was my reason to leave this in. The definition files themselves
could be cleaned up further, but in both of them there are a lot of
Unicode codepoints that could be useful when defining division lines for
the headers so I opted to just comment them out. I initially had the
default definition to require Unicode, but now it just changes to a
non-Unicode output if it can't. And this brings up the last concern. The
way certain settings are set, is that they are defined in the
`__TABLE__` section of the definition file. With `PARSE_TABLE_DATA`,
the script looks line by line for `SET *` or `IF *` and if found it will
effectively eval that line. The definition files are written so that for
instance `SET "CELL= gYw "` could be used to set the code which is used.
`If` was allow so that there could be a test if Unicode were available
and set something different for ASCII and Unicode. But it also opens the
possibility that a rogue actor could create a `ansi-color.cmd`
definition file something like `SET "foo=bar" & DoSomethingBad.exe`.
First of all I'd be flattered that anyone would use this very niche
tool, but it is something I think which needs to be called out.
Essentially the definition files are just batch files, but they are
extremely limited to executing only one line at a time and only
supporting IF and SET commands. I think this is a minimal risk because
at that point batch files would already be more effective, but there
should also be an expectation that a batch file will run something and
the same may not be true for the heavily degraded definition files. I
think the risk is minimal but it is a risk I wanted to make clear. This
really showcases some interesting techniques and ideas, and I hope that
it is useful. All told, there are a couple years of incremental changes
in this PR.
Closes#6470
[BASH script on tldp.org]: https://tldp.org/HOWTO/Bash-Prompt-HOWTO/x329.html
The `IRenderData::GetDefaultBrushColors` method was intended to return
the default attributes from which the renderer would calculate the
default background color. It should always have been returning a default
`TextAttribute` object, but the conhost `RenderData` implementation was
mistakenly returning the active attributes instead. This resulted in
margin areas being filled with the wrong color. To correct that, this PR
simply replaces all usage of `GetDefaultBrushColors` with hardcoded
default attributes.
## Validation Steps Performed
I've manually checked the test case described in issue #11976 and
confirmed that the conhost margin areas are now correctly filled with
the default background color.
Closes#11976
When copying content from the terminal to the clipboard (with
formatting), a default background color needs to be set to fill the
unused area of the pasted block. Prior to this PR, that color was not
correctly set, so the pasted content did not match what was seen on
screen.
Windows Terminal previously used the default background from the initial
color scheme, so it didn't take palette changes into account.
OpenConsole did use the active default color, but didn't take the
reverse screen mode into account, so could end up using the foreground
rather than the background color.
In both case I've changed the code to lookup the runtime colors in the
same way that renderer does, so they should now match what is seen on
screen.
## Validation Steps Performed
I've manually confirmed that the background color is now correctly set
when copying from both Windows Terminal and OpenConsole.
Closes#11988
## Summary of the Pull Request
When a conhost window is resized, the cursor is temporarily hidden, and the visibility is restored when the resize is finished. However, it wasn't taking into account that the cursor may already have been hidden to start with, in which case it would mistakenly force the cursor to be visible. This PR now saves the initial state of the visibility, so it can be correctly restored.
## PR Checklist
* [x] Closes#12024
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I've manually verified that this fixes the issue, and the cursor is no longer forced to be visible when the window is resized.
Only look for PGO package if build mode targeted; add packages.config dependency to ease restoration
## PR Checklist
* [x] Closes#11978
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Test of restore and build on fresh repo copy passed.
This PR attempts to minimize the amount of fiddling we do with the alpha
color components, by storing all colors with a zero alpha (the default
for `COLORREF` values) and then leaving it up to the renderer to adjust
the final alpha value as required (which it was already doing anyway).
This gets rid of the `argb.h` header file, which was originally being
used to produce `COLORREF` values with custom alpha components, and thus
is no longer required. Anywhere that was using the `ARGB` macro is now
using a standard `RGB` macro with a 0 alpha.
The `Utils::SetColorTableAlpha` method has also been removed, since that
was only really used to force an alpha of 255 on all the color table
entries, which isn't necessary.
There were also a number of places where we were using
`til::color::with_alpha`, to switch alpha components back and forth
between 0 and 255, which have now been removed. Some of these were
essentially noops, because the `til::color` class already applied the
appropriate alpha changes when converting from or to a `COLORREF`.
I've manually run a few attribute rendering tests to check that the
colors were still working correctly, and the default background color is
appropriately transparent when in acrylic mode.
Closes#11885
To unify with WinUI, we're going to share an engineering component of this particular NuGet package full of scripts and utilities to make PGOing things easier.
This basically removes all of the scripts that I ~blatantly stole~ copied from https://github.com/microsoft/microsoft-ui-xaml and moves to the NuGet package that the team generates instead. A bunch of build things had to be massaged to make it work in our pipeline.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Properly handle UTF-16 surrogates when calculating the position of matched pattern.
Fix#8709
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
b88ffb21b0/src/buffer/out/search.cpp (L335-L339)
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#8709
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
use `Utf16Parser::Parse` to handle code points from U+010000 to U+10FFFF in UTF-16.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
also the case by @mas90 https://github.com/microsoft/terminal/issues/8709#issuecomment-884915485:
Microsoft will be providing a Software Bill of Materials for our products. This onboards the Windows Terminal product to the common engineering system task that can scavenge for this information within our build project (already recorded for internal compliance reasons) and present it in a machine-readable interchange format.
See also: https://devblogs.microsoft.com/engineering-at-microsoft/generating-software-bills-of-materials-sboms-with-spdx-at-microsoft/
This does not yet include packaging and distributing the SBOM with our final packages. We are waiting for that tooling to come online for MSIX. Guidance is "Coming Soon™️."
## References
- https://github.com/microsoft/dropvalidator/issues/216 - `cgmanifest.json` are not being pulled in yet, but I've been told internally this will fix it. I will double-check when I hear back on this issue.
## PR Checklist
* [x] Closes#11810
* [x] I work here
* [x] I ran it and I see the manifest generated.
00fe2b0 made the mistake of hashing the pointer of `NewTerminalArgs` instances
instead of their content. This commit calls `NewTerminalArgs::Hash` instead.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* New test passes ✅
Some changes I had sitting around after working on #11153 that weren't
appropriate to put in that pr. Each commit should be independent if
particular ones are unwanted.
Slight overlap with #11305. There is some more code removal that can be
done after that is merged, specifically `AttachPane` can be deleted once
`SplitPane` handles adding multiple panes at once correctly.
## Details
- Makes `WalkTree` more useful, and closer to a real iterator. Add a
convenient `_FindPane` built on top of that.
- Coalesces `PrecalculateAutoSplit` and `PreCalculateCanSplit` since
they are basically identical logic.
- `Pane::Relayout` functionally did nothing because sizing was switched
to `star` sizing at some point in the past, so it was just deleted.
## Validation
Quick smoke test to make sure automatic splitting works, focus movement
still works correctly.
This commit enables /permissive- for all projects, as well as all other /Zc
flags not enabled by default by /permissive-. Some projects continue to be
built under /Zc:twoPhase- as JsonUtils.h fails to compile otherwise.
## PR Checklist
* [x] Closes#10703
* [x] I work here
* [x] Tests added/passed
## Summary of the Pull Request
Cleans up `ProfileViewModel`, `Profiles`, and `ProfilePageNavigationState` to move all of the view model responsibilities over to `ProfileViewModel`. We don't actually store the `ProfilePageNavigationState` anymore. We only use it as a way to transfer information to the new page.
## References
#9207 - Apply MVVM
## Detailed Description of the Pull Request / Additional comments
- I pulled out `ProfileViewModel` into its own file to keep things cleaner. It was getting pretty big.
- The font lists are now stored in a static location in `ProfileViewModel`, which means that we can reuse the same list between pages.
- the profile pivot was also moved to the `ProfileViewModel` and stored as a static value.
## Validation Steps Performed
✅ pivot behavior is the same
✅ font list is still populated
This commit serves two purposes:
* Simplify construction of hashes for non-trivial structs
This is especially helpful for ActionArgs
* Improve hash quality by not needlessly throwing away entropy
`til::hasher` is modeled after Rust's `std::hash::Hasher` and works similar.
The idea is simple: A stateful hash function can hash multiple unrelated fields,
without loosing entropy by running a finalizer after hashing each interim field.
This is especially useful for modern hash functions, which often have a wider
internal state than the output width. Additionally this improves performance
for hash functions with complex finalizers.
Most of this is of course a bit moot right now, considering that `til::hasher`
is still based on STL's FNV1a algorithm, which offers a very poor hash quality.
But counterintuitively, FNV1a actually benefits most from this PR: Since it
lacks a finalizer entirely, this commit greatly improves hash quality as
it encodes more data into FNV's state and thus improves randomness.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* No unusual behavior ✅
## Summary of the Pull Request
This replaces the `std::bitset` for the `SgrSaveRestoreStackOptions` enum with a `til::enumset` type, thus avoiding the need to cast the `enum` to a `size_t` every time a value is set or tested.
This also fixes an issue with the handling of omitted and zero parameters in the `XTPUSHSGR` sequence, which are meant to be ignored, and not interpreted as "all".
## PR Checklist
* [x] Closes#11879
* [x] Closes#11883
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
In addition to dropping all the `static_cast` operations, the use of the `til::enumset` also allowed us to get rid of the `try`/`catch` handling that was previously required in a couple of places, since the `til::enumset` operations don't throw.
And to fix the zero parameter handling, we just needed to add an additional lower bound when validating that options are in range - if an option is 0 (`All`), it will now just be ignored.
## Validation Steps Performed
The updated code still passes the existing unit tests, and I've manually confirmed that it fixes the test case for omitted and zero parameters from issue #11883.
* Adds the `cppwinrt_utils.h` to the include path for all winrt projects.
* Adds the file to the pch.h's for every project, so you don't need to include it in every header.
* Replaces some usages of `DECLARE_EVENT`/`DEFINE_EVENT` with `WINRT_CALLBACK`, which will do it in a oneliner
* Adds more `BASIC_FACTORY` usage.
* [x] Closes#2456
It's 92 files with one-line changes, don't be scared.
This adds x-macros for each of the actions, greatly reducing the amount of boilerplate needed for each action args.
Originally, I wanted to do more with this, but I think the x-macros we've discovered properly treads the line of ease-of-use and native c++ support, with how much it'll do for us
* [x] Closes#3475
* [x] Sure enough, the tests still pass.
* [ ] mmmmmmm 
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Clean up an invalid access that I introduced in #11440
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11684
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
This PR gets rids of the unused `RendererTests.cpp` file and removes
the `Renderer::s_CreateInstance` method declarations that were only
ever reference from that file, and weren't actually defined anywhere.
## PR Checklist
* [x] Closes#11870
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've not discussed this with core contributors already.
## Validation Steps Performed
Compiled the solution and ran the tests - everything still worked.
We have been advised to give not only the PDB paths, but paths to the EXE and DLL files we produce, to the PublishSymbols build task. We are assured by our engineering systems teams that enlightening the task to all of this information helps it hook things up better somewhere between our build machine and the symbol server such that debugging is more robust, especially around thrown exception stacks.
## PR Checklist
* [x] Closes#11737 - main fix for feeding EXEs and DLLs into the symbol publisher
* [x] Closes#11860 - bonus fix because I noticed the PDB source linking wasn't working
* [x] I work here.
* [x] If it fits, it sits.
## Summary of the Pull Request
Currently, the TermControl and ControlCore recieve a settings object that implements `IControlSettings`. They use for this for both reading the settings they should use, and also storing some runtime overrides to those settings (namely, `Opacity`). The object they recieve currently is a `T.S.M.TerminalSettings` object, as well as another `TerminalSettings` object if the user wants to have an `unfocusedAppearance`. All these are all hosted in the same process, so everything is fine and dandy.
With the upcoming move to having the Terminal split into multiple processes, this will no longer work. If the `ControlCore` in the Content Process is given a pointer to a `TerminalSettings` in a certain Window Process, and that control is subsequently moved to another window, then there's no guarantee that the original `TerminalSettings` object continues to exist. In this scenario, when window 1 is closed, now the Core is unable to read any settings, because the process that owned that object no longer exists.
The solution to this issue is to have the `ControlCore`'s own their own copy of the settings they were created with. that way, they can be confident those settings will always exist. Enter `ControlSettings`, a dumb struct for just storing all the contents of the Settings. I used x-macros for this, so that we don't need to copy-paste into this file every time we add a setting.
Changing this has all sorts of other fallout effects:
* Previewing a scheme/anything is a tad bit more annoying. Before, we could just sneak the previewed scheme into a `TerminalSettings` that lived between the settings we created the control with, and the settings they were actually using, and it would _just work_. Even explaining that here, it sounds like magic, because it was. However, now, the TermControl can't use a layered `TerminalSettings` for the settings anymore. Now we need to actually read out the current color table, and set the whole scheme when we change it. So now there's also a `Microsoft.Terminal.Core.Scheme` _struct_ for holding that data.
- Why a `struct`? Because that will go across the process boundary as a blob, rather than as a pointer to an object in the other process. That way we can transit the whole struct from window to core safely.
* A TermControl doesn't have a `IControlSettings` at all anymore - it initalizes itself via the settings in the `Core`. This will be useful for tear-out, when we need to have the `TermControl` initialize itself from just a `ControlCore`, without being able to rebuild the settings from scratch.
* The `TabTests` that were written under the assumption that the Control had a layered `TerminalSettings` obviously broke, as they were designed to. They've been modified to reflect the new reality.
* When we initialize the Control, we give it the settings and the `UnfocusedAppearance` all at once. If we don't give it an `unfocusedAppearance`, it will just use the focused appearance as the unfocused appearance.
* The Control no longer can _write_ settings to the `ControlSettings`. We don't want to be storing things in there. Pretty much everything we set in the control, we store somewhere other than in the settings object itself. However, `opacity` and `useAcrylic`, we need to store in a handy new `RUNTIME_SETTING` property. We can write those runtime overrides to those properties.
* We no longer store the color scheme for a pane in the persisted state. I'm tracking that in #9800. I don't think it's too hard to add back, but I wanted this in front of eyes sooner than later.
## References
* #1256
* #5000
* #9794 has the scheme previewing in it.
* #9818 is WAY more possible now.
## PR Checklist
* [x] Surprisingly there wasn't ever a card or issue for this one. This was only ever a bullet point in #5000.
* A bunch of these issues were fixed along the way, though I never intended to fix them:
* [x] Closes#11571
* [x] Closes#11586
* [x] Closes#7219
* [x] Closes#11067
* [x] I think #11623 actually ended up resolving this one, but I'm double tapping on it here: Closes#5703
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Along the way I tried to clean up code where possible, but not too agressively.
I didn't end up converting the various `MockTerminalSettings` classes used in tests to the x macros quite yet. I wanted to merge this with #11416 in `main` before I went too crazy.
## Validation Steps Performed
* [x] Scheme previewing works
* [x] Adjusting the font size works
* [x] focused/unfocused appearances still work
* [x] mouse-wheeling opacity still works
* [x] acrylic & cleartype still does the right thing
* [x] saving the settings still works
* [x] going wild on sliding the opacity slider in the settings doesn't crash the terminal
* [x] toggling retro effects with a keybinding still works
* [x] toggling retro effects with the command palette works
* [x] The matrix of (`useAcrylic(true,false)`)x(`opacity(50,100)`)x(`antialiasingMode(cleartype, grayscale)`) works as expected. Slightly changed, falls back to grayscale more often, but looks more right.
Unfortunately, does not come up with a good inner loop for buidling the package from the commandline. The inner loop for the resources just sucks.
* [x] closes#926
Adds snap layout support to the Terminal's maximize button. This PR is
full of BODGY, so brace yourselves.
Big thanks to Chris Swan in #11134 for building the prototype.
I don't believe this solves #8795, because XAML islands can't get
nchittest messages
- The window procedure for the drag bar forwards clicks on its client
area to its parent as non-client clicks.
- BODGY: It also _manually_ handles the caption buttons. They exist in
the titlebar, and work reasonably well with just XAML, if the drag bar
isn't covering them.
- However, to get snap layout support, we need to actually return
`HTMAXBUTTON` where the maximize button is. If the drag bar doesn't
cover the caption buttons, then the core input site (which takes up
the entirety of the XAML island) will steal the `WM_NCHITTEST` before
we get a chance to handle it.
- So, the drag bar covers the caption buttons, and manually handles
hovering and pressing them when needed. This gives the impression that
they're getting input as they normally would, even if they're not
_really_ getting input via XAML.
- We also need to manually display the button tooltips now, because XAML
doesn't know when they've been hovered for long enough. Hence, the
`_displayToolTip` `ThrottledFuncTrailing`
## Validation
Minimized, maximized, restored down, hovered the buttons slowly, moved
the mouse over them quickly, they feel the same as before. But now with
snap layouts appearing.
## TODO!
* [x] I'm working on getting the ToolTips on the caption buttons back. Alas, I needed a demo of this _today_, so I'll fix that tomorrow morning.
* [x] mild concern: I should probably test Win 10 to make sure there wasn't weird changes to the message loop in win11 that means this is broken on win10.
* [x] I think I used the wrong issue number for tons of my comments throughout this PR. Double check that. Should be #9443, not #9447.
Closes#9443
I thought this took care of #8587 ~as a bonus, because I was here, and the fix is _now_ trivial~, but looking at the latest commit that regressed.
Co-authored-by: Chris Swan <chswan@microsoft.com>
This is a followup commit for 168d28b.
By renaming `IInheritable::InsertParent(com_ptr)` and
`InsertParent(size_t, com_ptr)` into `AddLeastImportantParent(com_ptr)`
and `AddMostImportantParent(com_ptr)` respectively, we can improve
the clarity of our code's intent without the need for comments.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
As VS 2022 doesn't seem to store files with UTF-8 BOM as often anymore, we've
been getting more and more pull requests which seemingly randomly change files.
This cleans the situation up by removing the BOM from all files that have one.
Additionally, `Host.Tests.Feature.rc` was converted from UTF-16 to UTF-8.
This commit approximately doubles the performance of til::enumset
and reduces it's binary footprint by approximately 1kB.
Most of the binary size can be attributed to exception handling.
Unfortunately this commit removes assertions that the given values are less than
the number of bits in the `underlying_type`. However I believe this to be a good
trade-off as the tests previously only happened at runtime, while tests at
compile time would be highly preferable. Such tests are technically possible,
however MSVC fails to compile (valid) `static_assert`s containing
`static_cast`s over a parameter pack at the time of writing.
With future MSVC versions such checks can be added to this class.
This change was initially discussed in #10492, but was forgotten to
be considered before it was merged. Since the work was already done,
this commit re-introduces the optimization. It's free!
## PR Checklist
* [x] I work here.
* [x] Tests added/passed
## Validation Steps Performed
* Run `printf '\e]8;;http://example.com\e\\This is a link\e]8;;\e\\\n'` in WSL
* A wild dotted line appears ✔️
Since the settings UI's input fields behave similarly to the terminal's input,
`TerminalPage::_KeyDownHandler` also needs to behave similarly to
`TermControl::_KeyHandler`. This commit copies all relevant code
over from the latter into the former, including the suppression
of AltGr keys for keychord/action handling.
## PR Checklist
* [x] Closes#11788
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Use a German keyboard layout
* Open 2 regular tabs and 1 settings tab and focus an input field
* AltGr+2 produces the character ² ✔️
* Ctrl+Alt+2 opens the second tab ✔️
This PR merges the default colors and cursor color into the main color
table, enabling us to simplify the `ConGetSet` and `ITerminalApi`
interfaces, with just two methods required for getting and setting any
form of color palette entry.
The is a follow-up to the color table standardization in #11602, and a
another small step towards de-duplicating `AdaptDispatch` and
`TerminalDispatch` for issue #3849. It should also make it easier to
support color queries (#3718) and a configurable bold color (#5682) in
the future.
On the conhost side, default colors could originally be either indexed
positions in the 16-color table, or separate standalone RGB values. With
the new system, the default colors will always be in the color table, so
we just need to track their index positions.
To make this work, those positions need to be calculated at startup
based on the loaded registry/shortcut settings, and updated when
settings are changed (this is handled in
`CalculateDefaultColorIndices`). But the plus side is that it's now much
easier to lookup the default color values for rendering.
For now the default colors in Windows Terminal use hardcoded positions,
because it doesn't need indexed default colors like conhost. But in the
future I'd like to extend the index handling to both terminals, so we
can eventually support the VT525 indexed color operations.
As for the cursor color, that was previously stored in the `Cursor`
class, which meant that it needed to be copied around in various places
where cursors were being instantiated. Now that it's managed separately
in the color table, a lot of that code is no longer required.
## Validation
Some of the unit test initialization code needed to be updated to setup
the color table and default index values as required for the new system.
There were also some adjustments needed to account for API changes, in
particular for methods that now take index values for the default colors
in place of COLORREFs. But for the most part, the essential behavior of
the tests remains unchanged.
I've also run a variety of manual tests looking at the legacy console
APIs as well as the various VT color sequences, and checking that
everything works as expected when color schemes are changed, both in
Windows Terminal and conhost, and in the latter case with both indexed
colors and RGB values.
Closes#11768
I'm pretty exactly following the diff from #917. These paths weren't wrapped in `"`s, so building the solution in a directory with a space in it would explode.
Closes#917.
Turns out, the diff provided by that user wasn't exactly right. I've tested building in a directory with spaces now, and this seems to work.
Also caught a bug in the Generate Feature Flags script.
I'm working on making the FastUpToDate check in Vs work for the Terminal project. This is one of a few PRs in this area.
FastUpToDate lets vs check quickly determine that it doesn't need to do anything for a given project.
However, a few of our projects don't produce all the right artifacts, or check too many things, and this eventually causes the `wapproj` to rebuild, EVERY TIME YOU F5 in VS.
This second PR deals with some projects MYSTERIOUSLY depending on the `.xaml` files from `Terminal.Control`, even when they by all accounts shouldn't. TerminalSettingsModel ISN'T EVEN A XAML project, so I have no idea why it thinks it needs these xaml files. The TerminalAppLib project thinking it needs them - makes more sense, but is still confusing.
Below are my verbatim notes, which led to the solution in this PR.
```
34>------ Up-To-Date check: Project: Microsoft.Terminal.Settings.Model.Lib, Configuration: Debug x64 ------
34>Project is not up-to-date: build output 'c:\users\migrie\dev\public\terminal\bin\x64\debug\microsoft.terminal.settings.model.lib\microsoft.terminal.control\searchboxcontrol.xaml' is missing
```
* Just copying the xaml files from `bin\x64\debug\microsoft.terminal.control\microsoft.terminal.control\*.xaml` to `bin\x64\debug\microsoft.terminal.settings.model.lib\microsoft.terminal.control` seemed to fix this.
* the .xbfs were already there
* It's very unclear why these were ever needed? They aren't used in the build for `Microsoft.Terminal.Settings.Model.Lib`. They aren't copied as a part of the build either - no .xaml files are copied at all in fact
* [ ] Does TSE have these .xamls in it's output?
* UPDATE: checking out main, and building again - ran into this again. WHY??
* Cleaned again, then built TerminalApp.vcxproj. File is no longer needed? nothing makes sense.
* `obj\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsof.CA5CAD1A.tlog\Microsoft.Terminal.Settings.Model.Lib.write.1u.tlog`:
```
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.UI.Xaml\Assets\NoiseAsset_256X256_PNG.png
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xaml
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xaml
C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xaml
```
From the build:
```
18>Target _CopyOutOfDateSourceItemsToOutputDirectory:
18> Skipping target "_CopyOutOfDateSourceItemsToOutputDirectory" because all output files are up-to-date with respect to the input files.
18> Input files:
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Control\Microsoft.Terminal.Control\SearchBoxControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Control\Microsoft.Terminal.Control\TermControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Control\Microsoft.Terminal.Control\TSFInputControl.xbf
18> C:\Users\migrie\dev\public\terminal\packages\Microsoft.UI.Xaml.2.7.0-prerelease.210913003\runtimes\win10-x64\native\Microsoft.UI.Xaml\Assets\NoiseAsset_256X256_PNG.png
18> Output files:
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\SearchBoxControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TermControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.Terminal.Control\TSFInputControl.xbf
18> C:\Users\migrie\dev\public\terminal\bin\x64\Debug\Microsoft.Terminal.Settings.Model.Lib\Microsoft.UI.Xaml\Assets\NoiseAsset_256X256_PNG.png
```
* Hmm, `21>Project is not up-to-date: build output 'c:\users\migrie\dev\public\terminal\bin\x64\debug\terminalapplib\microsoft.terminal.control\searchboxcontrol.xaml' is missing`
as well.
That's what the original purpose of #865 was, but I went ahead and added some additiona text, now that we've got more of a flow for github figured out.
Closes#865
If msbuild is already on the path, we don't need to look for it.
Also,
> I know what I did. I installed VS 2022, which is a prerelease VS install. `tools\razzle` prefers the stable builds. I think I'm gonna remove that.
* [x] Closes#1313
* [x] Closes#11446
I'm working on making the FastUpToDate check in Vs work for the Terminal project. This is one of a few PRs in this area.
FastUpToDate lets vs check quickly determine that it doesn't need to do anything for a given project.
However, a few of our projects don't produce all the right artifacts, or check too many things, and this eventually causes the `wapproj` to rebuild, EVERY TIME YOU F5 in VS.
This first PR deals with the `.copycomplete` file in `obj\x64\debug\terminalconnection\`. Below are my verbatim notes, which led to the solution in this PR.
### Problem 1 ✅
* There were missing `.copycomplete` files across the repo.
```
obj\x64\debug\microsoft.terminal.settings.model.lib\microsoft.terminal.settings.modellib.vcxproj.copycomplete
obj\x64\debug\microsoft.terminal.settings.model\microsoft.terminal.settings.model.vcxproj.copycomplete
obj\x64\debug\terminalapplib\terminalapplib.vcxproj.copycomplete
obj\x64\debug\terminalapp\terminalapp.vcxproj.copycomplete
obj\x64\debug\terminalconnection\terminalconnection.vcxproj.copycomplete
```
- just making empty files there seemed good enough.
- Might be because the CopyLocal target was already there, but the task didn't ever run to create that file? Weird.
* UPDATE: checking out main, and building again - the `.copycomplete`s are gone. So that's something that can be improved.
* The only place I could find a reference was in `"obj\x64\Debug\TerminalConnection\TerminalConnection.vcxproj.FileListAbsolute.txt"`, which will get updated if you remove the line from that file (but no one seemingly writes it or mentiones it in the log)
* Deleting `bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll` then building the project did copy the file, but it didn't touch the copycomplete. Weird.
* Why does
- `TerminalConnection` think it needs this
- `Microsoft.Terminal.Settings.Model.Lib` have one
- `Microsoft.Terminal.Control*` **NOT** have one
* This file is a [`@(CopyUpToDateMarker)`](https://github.com/dotnet/msbuild/blob/main/src/Tasks/Microsoft.Common.CurrentVersion.targets#L392)
* The target [`_CopyFilesMarkedCopyLocal`](https://github.com/dotnet/msbuild/blob/main/src/Tasks/Microsoft.Common.CurrentVersion.targets#L4795) touches `@(CopyUpToDateMarker)`, when:
- `"'@(ReferencesCopiedInThisBuild)' != ''` and
- `'$(WroteAtLeastOneFile)' == 'true'"`
* In out build output:
```
6>Target _CopyFilesMarkedCopyLocal:
6> Using "Copy" task from assembly "Microsoft.Build.Tasks.Core, Version=15.1.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a".
6> Task "Copy"
6> Did not copy from file "C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll" to file "C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll" because the "SkipUnchangedFiles" parameter was set to "true" in the project and the files' sizes and timestamps match.
6> Done executing task "Copy".
6> Task "Touch" skipped, due to false condition; ('@(ReferencesCopiedInThisBuild)' != '' and '$(WroteAtLeastOneFile)' == 'true') was evaluated as ('C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll' != '' and 'False' == 'true').
```
- So `WroteAtLeastOneFile` should be true, when it's currently false. That _looks_ like it's set to true when the file does get copied, wheich did't happen because the copy was skipped.
- WAIT LOOK AT THAT MESSAGE. "Did not copy from file "
`"C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll"` to file
`"C:\Users\migrie\dev\public\terminal\bin\x64\Debug\TerminalConnection\cpprest142_2_10d.dll"`
THESE ARE THE SAME FILE.
`@(ReferenceCopyLocalPaths)` is filled with the file already?!
- The Target `AppLocalFromInstalled` is the only other thing that references `cpprest142_2_10d.dll`.
- Even if you delete the `cpprest142_2_10d.dll`, then `_CopyFilesMarkedCopyLocal` still evaluates the Touch condition as false, and doesn't touch it.
- the `deployBinary()` function in `packages\vcpkg-cpprestsdk.2.10.14\scripts\buildsystems\msbuild\applocal.ps1` does the actual job of copying the file. It copies it outside of MsBuild, which prevents MsBuild from copying it, and now MsBuild thinks it shouldn't write the `.copycomplete` file itself.
I'm working on making the FastUpToDate check in Vs work for the Terminal project. This is one of a few PRs in this area.
FastUpToDate lets vs check quickly determine that it doesn't need to do anything for a given project.
However, a few of our projects don't produce all the right artifacts, or check too many things, and this eventually causes the `wapproj` to rebuild, EVERY TIME YOU F5 in VS.
This third PR deals with the Actual fast up to date check for the CascadiaPackage.wapproj. When #11804, #11805 and this PR are all merged, you should be able to just F5 the Terminal in VS, and then change NOTHING, and F5 it again, without doing a build at all.
The wapproj `GetResolvedWinMD` target tries to get a winmd from every cppwinrt
executable we put in the package. But we DON'T produce a winmd. This makes the
FastUpToDate check fail every time, and leads to the whole wapproj build
running even if you're just f5'ing the package. EVEN AFTER A SUCCESSFUL BUILD.
Setting GenerateWindowsMetadata=false is enough to tell the build system that
we don't produce one, and get it off our backs.
### teams chat where we figured this out
[3:38 PM] Dustin Howett
however, that's not the only thing that "GetTargetPath" checks.
[3:38 PM] Dustin Howett
oh yeah more info: wapproj calls GetTargetPath on all projects it references
[3:38 PM] Dustin Howett
when it calls GTP on WindowsTerminal.vcxproj it is getting back a winmd (!)
[3:39 PM] Dustin Howett
here's the magic
[3:39 PM] Dustin Howett
[3:39 PM] Dustin Howett
it checks if any Link items specify GenerateWindowsMetadata
Upgrades our SDK from 19041 (Windows 10 20H1) to 22000 (Windows 11 RTM).
The newer SDK is more compatible with /Zc:preprocessor
and will allow us to use newer Windows 11 APIs directly.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Compiles ✔️
* Runs ✔️
til::equals:
At the time of writing wmemcmp() is not an intrinsic for MSVC,
but the STL uses it to implement wide string comparisons.
This produces 3x the assembly _per_ comparison and increases
runtime by 2-3x for strings of medium length (16 characters)
and 5x or more for long strings (128 characters or more).
See: https://github.com/microsoft/STL/issues/2289
Additionally a number of case insensitive, locale unaware
helpers for prefix/suffix comparisons are introduced.
There are some code pages with "unmapped" code points in the C1 range,
which results in them being translated into Unicode C1 control codes,
even though that is not their intended use. To avoid having these
characters triggering unintentional escape sequences, this PR now
disables C1 controls by default.
Switching to ISO-2022 encoding will re-enable them, though, since that
is the most likely scenario in which they would be required. They can
also be explicitly enabled, even in UTF-8 mode, with the `DECAC1` escape
sequence.
What I've done is add a new mode to the `StateMachine` class that
controls whether C1 code points are interpreted as control characters or
not. When disabled, these code points are simply dropped from the
output, similar to the way a `NUL` is interpreted.
This isn't exactly the way they were handled in the v1 console (which I
think replaces them with the font _notdef_ glyph), but it matches the
XTerm behavior, which seems more appropriate considering this is in VT
mode. And it's worth noting that Windows Explorer seems to work the same
way.
As mentioned above, the mode can be enabled by designating the ISO-2022
coding system with a `DOCS` sequence, and it will be disabled again when
UTF-8 is designated. You can also enable it explicitly with a `DECAC1`
sequence (originally this was actually a DEC printer sequence, but it
doesn't seem unreasonable to use it in a terminal).
I've also extended the operations that save and restore "cursor state"
(e.g. `DECSC` and `DECRC`) to include the state of the C1 parser mode,
since it's closely tied to the code page and character sets which are
also saved there. Similarly, when a `DECSTR` sequence resets the code
page and character sets, I've now made it reset the C1 mode as well.
I should note that the new `StateMachine` mode is controlled via a
generic `SetParserMode` method (with a matching API in the `ConGetSet`
interface) to allow for easier addition of other modes in the future.
And I've reimplemented the existing ANSI/VT52 mode in terms of these
generic methods instead of it having to have its own separate APIs.
## Validation Steps Performed
Some of the unit tests for OSC sequences were using a C1 `0x9C` for the
string terminator, which doesn't work by default anymore. Since that's
not a good practice anyway, I thought it best to change those to a
standard 7-bit terminator. However, in tests that were explicitly
validating the C1 controls, I've just enabled the C1 parser mode at the
start of the tests in order to get them working again.
There were also some ANSI mode adapter tests that had to be updated to
account for the fact that it has now been reimplemented in terms of the
`SetParserMode` API.
I've added a new state machine test to validate the changes in behavior
when the C1 parser mode is enabled or disabled. And I've added an
adapter test to verify that the `DesignateCodingSystems` and
`AcceptC1Controls` methods toggle the C1 parser mode as expected.
I've manually verified the test cases in #10069 and #10310 to confirm
that they're no longer triggering control sequences by default.
Although, as I explained above, the C1 code points are completely
dropped from the output rather than displayed as _notdef_ glyphs. I
think this is a reasonable compromise though.
Closes#10069Closes#10310
This commit is a minimal fix in order to pass the
`IDWriteFontCollection` we create out of .ttf files residing next to our
binaries to the `IDWriteFontFallback::MapCharacters` call. The
`IDWriteTextFormat` is used in order to carry the font collection over
into `CustomTextLayout`.
## Validation
* Put `JetBrainsMono-Regular.ttf` into the binary output directory
* Modify `HKCU:\Console\*\FaceName` to `JetBrains Mono`
* Launch OpenConsole.exe
* OpenConsole uses JetBrains Mono ✔️Closes#11032Closes#11648
## Summary of the Pull Request
This creates an `elevated-state.json` that lives in `%LOCALAPPDATA%` next to `state.json`, that's only writable when elevated. It doesn't _use_ this file for anything, it just puts the framework down for use later.
It's _just like `ApplicationState`_. We'll use it the same way.
It's readable when unelevated, which is nice, but not writable. If you're dumb and try to write to the file when unelevated, it'll just silently do nothing.
If we try opening the file and find out the permissions are different, we'll _blow the file away entirely_. This is to prevent someone from renaming the original file (which they can do unelevated), then slapping a new file that's writable by them down in it's place.
## References
* We're going to use this in #11096, but these PRs need to be broken up.
## PR Checklist
* [x] Closes nothing
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - maybe? not sure we have docs on `state.json` at all yet
## Validation Steps Performed
I've played with this much more in `dev/migrie/f/non-terminal-content-elevation-warning`
###### followed by #11308, #11310
This commit introduces "AtlasEngine", a new text renderer based on DxEngine.
But unlike it, DirectWrite and Direct2D are only used to rasterize glyphs.
Blending and placing these glyphs into the target view is being done using
Direct3D and a simple HLSL shader. Since this new renderer more aggressively
assumes that the text is monospace, it simplifies the implementation:
The viewport is divided into cells, and its data is stored as a simple matrix.
Modifications to this matrix involve only simple pointer arithmetic and is easy
to understand. But just like with DxEngine however, DirectWrite
related code remains extremely complex and hard to understand.
Supported features:
* Basic text rendering with grayscale AA
* Foreground and background colors
* Emojis, including zero width joiners
* Underline, dotted underline, strikethrough
* Custom font axes and features
* Selections
* All cursor styles
* Full alpha support for all colors
* _Should_ work with Windows 7
Unsupported features:
* A more conservative GPU memory usage
The backing texture atlas for glyphs is grow-only and will not shrink.
After 256MB of memory is used up (~20k glyphs) text output
will be broken until the renderer is restarted.
* ClearType
* Remaining gridlines (left, right, top, bottom, double underline)
* Hyperlinks don't get full underlines if hovered in WT
* Softfonts
* Non-default line renditions
Performance:
* Runs at up to native display refresh rate
Unfortunately the frame rate often drops below refresh rate, due us
fighting over the buffer lock with other parts of the application.
* CPU consumption is up to halved compared to DxEngine
AtlasEngine is still highly unoptimized. Glyph hashing
consumes up to a third of the current CPU time.
* No regressions in WT performance
VT parsing and related buffer management takes up most of the CPU time (~85%),
due to which the AtlasEngine can't show any further improvements.
* ~2x improvement in raw text throughput in OpenConsole
compared to DxEngine running at 144 FPS
* ≥10x improvement in colored VT output in WT/OpenConsole
compared to DxEngine running at 144 FPS
Drag and drop does not work for WSL because paths are pasted as windows
paths having incorrect path separator and path root. This PR adds code
to correct the path in TerminalControl before pasting to WSL terminals.
One problem with this approach is that it assumes the default WSL
automount root of "/mnt". It would be possible to add a setting like
"WslDragAndDropMountRoot"... but I decided it if someone wants to change
automount location it would be simple enough just to create the "/mnt"
symlink in WSL.
## Validation
Couldn't find an obvious place to add a test. Manually tested
cut-n-paste from following paths:
- "c:\"
- "c:\subdir"
- "c:\subdir\subdir"
- "\\wsl.localhost\<distro>"
- \\wsl.localhost\<distro>\subdir"
Closes#331
6140fd9 causes a binary size regression in conhost.
This PR fixes most if not all of the regression, by replacing `FMT_STRING`
with `FMT_COMPILE` allowing us to drop most of the formatters built
into fmt during linking (for instance floating point formatters).
Additionally `std::wstring` was replaced with `fmt::basic_memory_buffer`
in the same vein as was done for VtEngine. Stack is
cheap and this prevents any unnecessary allocations.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* vttest 11.2.5.3.6.7 and .8 (DECSTBM and SGR) complete successfully ✅
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 063b86ac10af16cade5c0754adcbf27e7e9ae266
Related work items: MSFT-34534216, MSFT-36986009, MSFT-36986203
Fixes MSFT:34673647, at least I'm pretty sure. That's only ever hit a few
times externally, and internally it's hitting a lot on 1.9.1942 builds, which
doesn't really make any sense.
Window sends an event that requests exit from fullscreen then SC_RESTORE messages is sent and it is in fullscreen mode.
Closes#10607
## Validation Steps Performed
Border and tabbar now appear after exiting fullscreen via "win+arrow down".
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Checked the link, skipping the redirect HTTP => HTTPS this way 0:-)
This one
http://azuredevopspodcast.clear-measure.com/kayla-cinnamon-and-rich-turner-on-devops-on-the-windows-terminal-team-episode-54
is still only available via HTTP, sadly.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<http://www.runasradio.com/Shows/Show/645> is being redirected to <https://www.runasradio.com/Shows/Show/645>
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* N/A Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* N/A Tests added/passed
* N/A Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* N/A Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## ~~Detailed Description of the Pull Request / Additional comments~~
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Opened the link.
Implements `_MakePane` in `TerminalPage`, which creates a pane that then can be used to pass into another pane to split or to create a new tab with. Places where we split pane or create a new tab now use `_MakePane`.
## PR Checklist
* [x] Closes#11021
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I work here
## Validation Steps Performed
Stands up to manual testing with multiple new pane/new tab commands as well as startup actions
## Summary of the Pull Request
In the original implementation, we used two different orderings for the color tables. The WT color table used ANSI order, while the conhost color table used a Windows-specific order. This PR standardizes on the ANSI color order everywhere, so the usage of indexed colors is consistent across both parts of the code base, which will hopefully allow more of the code to be shared one day.
## References
This is another small step towards de-duplicating `AdaptDispatch` and `TerminalDispatch` for issue #3849, and is essentially a followup to the SGR dispatch refactoring in PR #6728.
## PR Checklist
* [x] Closes#11461
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #11461
## Detailed Description of the Pull Request / Additional comments
Conhost still needs to deal with legacy attributes using Windows color order, so those values now need to be transposed to ANSI colors order when creating a `TextAttribute` object. This is done with a simple mapping table, which also handles the translation of the default color entries, so it's actually slightly faster than the original code.
And when converting `TextAttribute` values back to legacy console attributes, we were already using a mapping table to handle the narrowing of 256-color values down to 16 colors, so we just needed to adjust that table to account for the translation from ANSI to Windows, and then could make use of the same table for both 256-color and 16-color values.
There are also a few places in conhost that read from or write to the color tables, and those now need to transpose the index values. I've addressed this by creating separate `SetLegacyColorTableEntry` and `GetLegacyColorTableEntry` methods in the `Settings` class which take care of the mapping, so it's now clearer in which cases the code is dealing with legacy values, and which are ANSI values.
These methods are used in the `SetConsoleScreenBufferInfoEx` and `GetConsoleScreenBufferInfoEx` APIs, as well as a few place where color preferences are handled (the registry, shortcut links, and the properties dialog), none of which are particularly sensitive to performance. However, we also use the legacy table when looking up the default colors for rendering (which happens a lot), so I've refactored that code so the default color calculations now only occur once per frame.
The plus side of all of this is that the VT code doesn't need to do the index translation anymore, so we can finally get rid of all the calls to `XTermToWindowsIndex`, and we no longer need a separate color table initialization method for conhost, so I was able to merge a number of color initialization methods into one. We also no longer need to translate from legacy values to ANSI when generating VT sequences for conpty.
The one exception to that is the 16-color VT renderer, which uses the `TextColor::GetLegacyIndex` method to approximate 16-color equivalents for RGB and 256-color values. Since that method returns a legacy index, it still needs to be translated to ANSI before it can be used in a VT sequence. But this should be no worse than it was before.
One more special case is conhost's secret _Color Selection_ feature. That uses `Ctrl`+Number and `Alt`+Number key sequences to highlight parts of the buffer, and the mapping from number to color is based on the Windows color order. So that mapping now needs to be transposed, but that's also not performance sensitive.
The only thing that I haven't bothered to update is the trace logging code in the `Telemetry` class, which logs the first 16 entries in the color table. Those entries are now going to be in a different order, but I didn't think that would be of great concern to anyone.
## Validation Steps Performed
A lot of unit tests needed to be updated to use ANSI color constants when setting indexed colors, where before they might have been expecting values in Windows order. But this replaced a wild mix of different constants, sometimes having to use bit shifting, as well as values mapped with `XTermToWindowsIndex`, so I think the tests are a whole lot clearer now. Only a few cases have been left with literal numbers where that seemed more appropriate.
In addition to getting the unit tests working, I've also manually tested the behaviour of all the console APIs which I thought could be affected by these changes, and confirmed that they produced the same results in the new code as they did in the original implementation.
This includes:
- `WriteConsoleOutput`
- `ReadConsoleOutput`
- `SetConsoleTextAttribute` with `WriteConsoleOutputCharacter`
- `FillConsoleOutputAttribute` and `FillConsoleOutputCharacter`
- `ScrollConsoleScreenBuffer`
- `GetConsoleScreenBufferInfo`
- `GetConsoleScreenBufferInfoEx`
- `SetConsoleScreenBufferInfoEx`
I've also manually tested changing colors via the console properties menu, the registry, and shortcut links, including setting default colors and popup colors. And I've tested that the "Quirks Mode" is still working as expected in PowerShell.
In terms of performance, I wrote a little test app that filled a 80x9999 buffer with random color combinations using `WriteConsoleOutput`, which I figured was likely to be the most performance sensitive call, and I think it now actually performs slightly better than the original implementation.
I've also tested similar code - just filling the visible window - with SGR VT sequences of various types, and the performance seems about the same as it was before.
#11404 changed `_OpenSettingsUI` to `OpenSettingsUI` in `TerminalPage`, but there is still one leftover reference to `_OpenSettingsUI`. This commit fixes that.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds ability for app to change system context menu
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9666
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Introduces X-macros to reduce the number of places we need to write essentially the same line of code but for a different setting (declaring it in the header file, in `Copy`, `LayerJson`, `ToJson`, etc).
## Summary of the Pull Request
There is a non-zero subset of applications that randomly output _Locking Shift_ escape sequences which will invoke a character set from G2 or G3 into the left half of the code table. If those G-sets are mapped to Latin1, that can result in the terminal producing output that appears to be broken. This PR now defaults all G-sets to ASCII, to prevent an unintentional _Locking Shift_ from having any effect.
## PR Checklist
* [x] Closes#10408
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #10408
## Detailed Description of the Pull Request / Additional comments
Most other modern terminals also default to ASCII in all G-sets, so this shouldn't break any modern applications. Legacy 8-bit applications may still expect the G2 and G3 sets mapped to Latin1, but they would also need to have the ISO-2022 encoding enabled, so we can keep them happy by setting G2 and G3 correctly when the ISO-2022 encoding is requested.
## Validation Steps Performed
I've manually confirmed that `echo -e "\en"` and `echo -e "\eo"` no longer have any visible effect on the output (at least without first invoking another character set into G2 or G3). I've also confirmed that they do still work as expected (i.e. selecting Latin1) after enabling the ISO-2022 encoding.
## Summary of the Pull Request
When we are on a settings UI tab, `_GetActiveControl` returns a `nullptr`, make sure not to try and focus it in that case
## PR Checklist
* [x] Closes#11633
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
No longer crashes
This is a pretty obvious typo in retrospect. Never hit it before, because in all non-defterm windows, the `_startupActions` always has one action.
* [x] Closes#11463
FontInfoBase and it's descendents are missing noexcept annotations, which
virally forces other code to not be noexcept as well during AuditMode checks.
Apart from adding noexcept, this commit also
* Passes std::wstring_view by reference.
* Pass the FillLegacyNameBuffer argument as a simple pointer-to-array,
allowing us to fill the buffer with a single memcpy.
(gsl::span's iterators inhibit any internal STL optimizations.)
* Move operator== declarations inside the class to reduce code size.
All other changes are an effect of the virality of noexcept.
This is an offshoot from #11623.
## Validation Steps Performed
* It still compiles ✔️
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Opt in setting to trim trailing white space when pasting a text into the terminal
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9400
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manually testing to paste text with and without trailing white spaces, with and without the option activated
The "updates" key is an alternative "guid" key for fragment profiles.
But SettingsLoader::_appendProfile stores and deduplicates profiles according
to their "guid" only. We need to modify the function to optionally store
profiles by their "updates" key as well, otherwise multiple fragment
profiles without "guid" might collide as they produce the same default GUID.
## PR Checklist
* [x] Closes#11597
* [x] I work here
* [ ] Tests added/passed
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Unit tests pass ✔️
* Issue #11597 doesn't reproduce anymore ✔️
We don't actually have a hard date for 2.0 anymore, so I'm removing those dates to make room for 1.13, 1.14, etc. Also updated the list of milestones with the current state. We're actually doing pretty darn good (considering there was a bit of a global pandemic to contend with!)
This commit renames `Base64::s_Decode` into `Base64::Decode` and improves its
average performance on short strings of less than 200 characters by 4.5x.
This is achieved by implementing a classic base64 decoder that reads 4
characters at a time and produces 3 output bytes. Furthermore a small
128 byte lookup table is used to quickly map characters to values.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Run WSL in Windows Terminal
* Run `printf "\033]52;c;aHR0cHM6Ly9naXRodWIuY29tL21pY3Jvc29mdC90ZXJtaW5hbC9wdWxsLzExNDY3\a"`
* Clipboard contains `https://github.com/microsoft/terminal/pull/11467` ✔️
Instead of having a separate method for setting each mouse and keyboard
mode, this PR consolidates them all into a single method which takes a
mode parameter, and stores the modes in a `til::enumset` rather than
having a separate `bool` for each mode.
This enables us to get rid of a lot of boilerplate code, and makes the
code easier to extend when we want to introduce additional modes in the
future. It'll also makes it easier to read back the state of the various
modes when implementing the `DECRQM` query.
Most of the complication is in the `TerminalInput` class, which had to
be adjusted to work with an `enumset` in place of all the `bool` fields.
For the rest, it was largely a matter of replacing calls to all the old
mode setting methods with the new `SetInputMode` method, and deleting a
bunch of unused code.
One thing worth mentioning is that the `AdaptDispatch` implementation
used to have a `_ShouldPassThroughInputModeChange` method that was
called after every mode change. This code has now been moved up into the
`SetInputMode` implementation in `ConhostInternalGetSet` so it's just
handled in one place. Keeping this out of the dispatch class will also
be beneficial for sharing the implementation with `TerminalDispatch`.
## Validation
The updated interface necessitated some adjustments to the tests in
`AdapterTest` and `MouseInputTest`, but the essential structure of the
tests remains unchanged, and everything still passes.
I've also tested the keyboard and mouse modes in Vttest and confirmed
they still work at least as well as they did before (both conhost and
Windows Terminal), and I tested the alternate scroll mode manually
(conhost only).
Simplifying the `ConGetSet` and `ITerminalApi` is also part of the plan
to de-duplicate the `AdaptDispatch` and `TerminalDispatch`
implementation (#3849).
Fixes#11606
This is weird, but the infobars would appear totally on top of the
TerminalPage when `showTabsInTitlebar:false`. This would result in the infobar
obscuring the tabs.
Now, the infobars are strictly inserted after the tabs, before the content. So
when they appear, they will reduce the amount of space usable for the control.
That is a little annoying, but preferable to the tabs totally not existing.
Relevant conversation notes from #10798:
> > If the info bar is not local to the tab, then its location between the tab
> > bar (when the title bar is hidden) and the terminal panes feels
> > misleading. Should it instead be above the tab bar or below the terminal
> > panes?
>
> You're... not wrong here. It's maybe not the best place for it, but _on top_
> of the tabs would look insane, and probably wouldn't even work easily, given
> the way we reparent the tab row into the titlebar.
>
> In the pane itself would make more sense, but that runs abreast of all sorts
> of things like #9024, #4998, which might make more sense.
I'm just gonna go with this now, because it's _better_ than before, while we
work out what's _best_.
After this commit OpenConsoleProxy will be built without a CRT.
This cuts down its binary size and DLL dependency bloat.
We hope that this fixes a COM server activation bug if the
user doesn't have a CRT installed globally on their system.
Fixes#11529
## Summary of the Pull Request
Ensures that the background image path is displayed in the settings UI.
## References
One of the items on #11353
## PR Checklist
* [x] Closes#11541
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Set the background image path and saw that it was displayed in the settings UI.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Moves baskgroung image update releated code into separate function and adds uri path construction exeption handling.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#11361
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tried to put garbage as a path. Terminal didn't crashed.
Don't crash if we try to save the window layout while we are closing, and try to avoid saving at all.
Might impact #11354
## Detailed Description of the Pull Request / Additional comments
- Revoke the event handler/save throttler so we don't even try to get the window layout when we are closing
- Try to check for nullptrs, but then apply `try {} CATCH_LOG()` liberally
## Validation Steps Performed
The happy path of saving normally is still fine, but I haven't been unlucky enough to trigger the crash myself.
This commit reduces the number of generated VS profiles from 6 down to just 2
per VS instance. The reason we did this is out of concern of overwhelming or
annoying new users with too many profiles. Especially since it's far easier
at the moment to add new generators compared to removing them.
As before only the latest instance is not hidden by default.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [x] As discussed in a Team Sync meeting
## Validation Steps Performed
* Installed Visual Studio 2019 and 2022 Preview
* A profile for both is generated, while the 2019 one is hidden by default ✔️
* $env:VSCMD_ARG_TGT_ARCH is x64 on my AMD64 machine ✔️
Considering the number of reports of "defterm isn't working (mysteriously)", I figured more logging current hurt. I also added a wprp profile for the defterm logging as well, which should capture conhost side things as well.
From an elevated conhost:
```
wpr -start path\to\Terminal.wprp!Defterm.Verbose
wpr -stop %USERPROFILE%\defterm-trace.etl
```
* [x] I work here
* [x] relevant to: #10594, #11529, #11524.
## Summary of the Pull Request
Currently when configuring the action
```json
{ "command": { "action": "closeTabsAfter" } }
```
we get a schema error in VSCode: `Matches multiple schemas when only one must validate.`.
The problem is that it matches both `closeTabsAfter` and `closeTab`, since the schema uses regex patterns to match instead of plain strings. I swapped the usage of `"pattern"` with `"const"` for all actions.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I checked and this action configuration no longer errors.
Up until this commit PSReadline caused OutputDebugString to be called
with a complex log message to on every newline. At the time of writing,
Visual Studio's Output window is fairly slow and after this change newlines
feel a fair bit snappier when running under Visual Studio's debugger.
## Validation Steps Performed
* pwsh.exe continues to work correctly ✔️
ControlCore::FontFaceName() is called 10/s by TSFInputControl.
The getter was modified to cache the STL string in a hstring allowing
us to return a value without temporary allocations during runtime.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Font face and size changes properly update TSFInputControl ✔️
## Summary of the Pull Request
Currently when configuring the action
```json
{ "command": { "action": "commandPalette", "launchMode": "commandLine" }, "key": "ctrl+shift+p" }
```
or
```json
{ "command": { "action": "multipleActions", "actions": [{ "action": "paste" }] }, "key": "ctrl+shift+v" }
```
we get a schema error in VSCode. These object variants of the actions were not configured properly in the schema, so I fixed it.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
In the schema there is a big `oneOf` for the `command` of an action under `actions`.
Commands that also accept extra arguments have an object type defined for it.
The `commandPalette` and `multipleActions` commands accept extra arguments, and also have matching `CommandPaletteAction` and `MultipleActionsAction` object types defined, but they are unused.
So I added them to the `oneOf` array in the correct placement.
## Validation Steps Performed
## Summary of the Pull Request
The `settings.json` schema had `"default"`s for some boolean settings set as quoted strings (`"true"` / `"false"`), so I removed the quotes.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan
## Detailed Description of the Pull Request / Additional comments
VSCode autocompletes the default value when you select the setting in intellisense, so it autocompleted a string which caused a schema error. Booleans should be JSON booleans, not quoted.
## Validation Steps Performed
## Summary of the Pull Request
As a part of the Interactivity split, `TermControlAutomationPeer` had to be split into `TermControlAutomationPeer` (TCAP) and `InteractivityAutomationPeer` (IAP). Just about all of the functions in `InterativityAutomationPeer` operate by calling the non-XAML UIA Provider then wrapping the resulting `UIATextRange` into a XAML format (a `XamlUiaTextRange` [XUTR]). As a part of that XUTR constructor, we need a reference to the parent provider.
We generally get that via `ProviderFromPeer()`, but IAP's `ProviderFromPeer()` returned null (presumably because IAP isn't in the UI tree, whereas TCAP is directly registered as the automation peer for the `TermControl`).
It looks like some screen readers didn't care (like NVDA, though there may be a chance we just didn't encounter an issue just yet), but Narrator definitely did.
The fix was to provide XUTR constructors the `ProviderFromPeer` from TCAP, _not_ IAP. To accomplish this, IAP now holds a weak reference to TCAP, and provides the `ProviderFromPeer` when needed. We can't cache this result because there is no guarantee that it won't change.
Some miscellaneous changes include:
- `TermControl::OnCreateAutomationPeer` now returns the existing auto peer instead of always creating a new one
- `TCAP::WrapArrayOfTextRangeProviders` was removed as it was unused (normally, this would be directly affected by the main `ProviderFromPeer` change here)
- `XUTR::GetEnclosingElement` is now hooked up to trace logging for debugging purposes
## References
Introduced in #10051Closes#11488
## Validation Steps Performed
✅ Narrator scan mode now works (verified with character, word, and line navigation)
✅ NVDA movement still works (verified with word and line navigation)
## Summary of the Pull Request
When the window moves, hide any visible content dialog (only one can be shown at a time) and ensure its associated async operation is terminated.
#10922 dismisses any open popups when the window is moved or any scroll viewer scrolls. However, if you just close a Popup from the UI tree, the async operation associated to a ContentDialog (started with `dialog.ShowAsync`) does not terminate. The dialog lock that prevents opening multiple dialogs at the same time is not released, and no further dialog can be shown.
Explicitly dismissing the only visible ContentDialog using its `Hide` method terminates the operation.
## Validation Steps Performed
Manual tests, open up dialogs and move the window (like in #11425)
References #10922Closes#11425
This commit enables /fp:fast. This doubles the performance of the Delta E
computation in #11095 for instance. Additionally it re-enables two options for
debug builds which are normally enabled by default by Visual Studio.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* No change in binary size
* No obvious change in behavior
This change enables access to the Defaults page in stable builds of
terminal. It is intended that we backport this feature flag edit to
1.11, so that Defaults can roll out with 1.11 when it becomes stable.
If we find that the settings file doesn't exist, or is empty, then let's quick
delete the state file as well. If the user does have a state file, and not a
settings, then they probably tried to reset their settings. It might have data
in it that was only relevant for a previous iteration of the settings file. If
we don't, we'll load the old state and ignore all dynamic profiles (for
example)!
We'll remove all of the data in the `ApplicationState` object and reset it to
the defaults.
This will delete the state file!
That's the sure-fire way to make sure the data doesn't come back. If we leave
it untouched, then when we go to write the file back out, we'll first re-read
it's contents and try to overlay our new state. However, nullopts won't remove
keys from the JSON, so we'll end up with the original state in the file.
* [x] Closes#11119
* [x] Tested on a cold launch of the Terminal with an existing `state.json`
and an empty `settings.json`
* [x] Tested a hot-reload of deleting the `settings.json`
This implements command line matching for `CascadiaSettings::GetProfileForArgs`.
The command lines for all user profiles are resolved to absolute file paths,
argument quotes are standardized ("canonicalized") and the results are cached.
When `GetProfileForArgs` is called with a Commandline() value, we "canonicalize"
the argument as well and find the profile that is the longest prefix.
If none could be found the default profile is returned.
## PR Checklist
* [x] Closes#9458
* [x] Closes#10952
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* Open a `cmd.exe` tab in the store-version of WT
* Run `start cmd`
--> A tab with the `cmd.exe` profile opens
* Run `start pwsh.exe`
--> A tab with the PowerShell 7 profile opens
* Run PowerShell 7 from the start menu
--> A tab with the PowerShell 7 profile opens
* Create a symlink for PowerShell 7 and launch `pwsh.exe` from there
--> A tab with the PowerShell 7 profile opens
I thought that microsoft/microsoft-ui-xaml#3183 might just fix this for us, but it didn't. We've got our RadioButton's all up in SettingsContainers, so they all think they're `AutomationProperties.AccessibilityView="Raw"` for some reason. If you simply add the `Content` to these, then they all end up correct in Accessibility Insights
## PR Checklist
* [x] Will take care of #11248 but I can't be the one to close it.
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
This commit adds a simple information popup about default terminals,
guiding first-time Windows 11 users into changing the default terminal.
## Validation Steps Performed
* Info bar pops up on Windows 11 ✔️
* Info bar can be dismissed persistently ✔️
This was originally in #11308. Thought we should check it in for 1.12 even
though that won't merge this release. Should slightly mitigate the number of
users that see this warning.
`CascadiaSettings::_createNewProfile` failed to call `_FinalizeInheritance`.
This commits fixes the issue and adds a stern warning for future me.
## PR Checklist
* [x] Closes#11392
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Open settings UI
* Modify font size in base layer
* _Don't_ save
* Duplicate any profile with default font size
* Ensure the duplicated profile shows the modified base layer font size ✔️
In #11180 we made `opacity` independent from `useAcrylic`. We also changed the mouse wheel behavior to only change opacity, and not mess with acrylic.
However, on Windows 10, vintage opacity doesn't work at all. So there, we still need to manually enable acrylic when the user requests opacity.
* [x] Closes#11285
SUI changes in action:
It's possible that we're about to be started, _before_
our paired connection is started. Both will get Start()'ed when
their owning TermControl is finally laid out. However, if we're
started first, then we'll immediately start printing to the other
control as well, which might not have initialized yet. If we do
that, we'll explode.
Instead, wait here until the other connection is started too,
before actually starting the connection to the client app. This
will ensure both controls are initialized before the client app
is.
Fixes#11282
Tested: Opened about 100 debug taps. They all worked. :shipit:
`CascadiaSettings` is default constructed when human readable error messages are
returned. Even in such cases we need to ensure that all fields are properly
initialized, as a caller might decide to call a `GlobalSettings` getter.
Thus a crash occurred whenever a user was hot-reloading their settings file with
invalid JSON as other code then tried to compare the `GlobalSettings()`.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Start Windows Terminal and ensure the settings load fine
* Add `"commandline": 123` to any of the generated profiles in settings.json
* The application doesn't crash and shows a warning message
WinUI/XAML requires the `SelectedItem` to be member of the list of
`ItemsSource`. `CascadiaSettings::DefaultTerminals()` is such an `ItemsSource`
and is called every time the launch settings page is visited.
It calls `DefaultTerminal::Available()` which in turn calls `Refresh()`.
While the `SelectedItem` was cached in `CascadiaSettings`, the value of
`DefaultTerminals()` wasn't. Thus every time the page was visited, it refreshed
the `ItemsSource` list without invalidating the current `SelectedItem`.
This commit prevents such accidental mishaps from occurring in the future,
by moving the responsibility of caching solely to the `CascadiaSettings` class.
## PR Checklist
* [x] Closes#11424
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Navigating between SUI pages maintains the current dropdown selection ✔️
* Saving the settings saves the correct terminal at `HKCU:\Console\%%Startup` ✔️
## Summary of the Pull Request
Fixes two issues related to SUI's Actions page:
1. Crash when adding an action and setting key chord to one that is already taken
- **Cause**: the new key binding that was introduced with the "Add new" button appears in `_KeyBindingList` that we're iterating over. This has no `CurrentKeys()`, resulting in a null pointer exception.
- **Fix**: null-check it
2. There's an action that appears as being nameless in the dropdown
- **Cause**: The culprit seems to be `MultipleActions`. We would register it, but it wouldn't have a name, so it would appear as a nameless option.
- **Fix**: if it has no name, don't register it. This is also future-proof in that any new nameless actions won't be automatically added.
Closes#10981
Part of #11353
This commit fixes various failing TestHostApp unit tests.
Most of these broke as part of 168d28b (#11184).
## PR Checklist
* [x] Closes#11339
* [x] I work here
* [x] Tests added/passed
I've had a hard time with the tab colors this week.
Turns out that setting the background to nullptr will make the tabviewitem invisible to hit tests. `Transparent`, on the other hand, is totally valid, and the expected default.
Tabs as of this commit:
## PR Checklist
* [x] Closes#11382
* [x] I work here
This low-key reverts a bit of #11369, which fixed#11294, which regressed in #11240
This fixes an issue that Touch Keyboard is not invoked when user taps on the PowerShell.
Before this change, it was returning small rectangle on the right of the cursor. Touch Keyboard should be invoked by tapping anywhere inside the console.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
ITfContextOwner::GetScreenExt is used to define rectangle that can invoke Touch Keyboard.
https://docs.microsoft.com/en-us/windows/win32/api/msctf/nf-msctf-itfcontextowner-getscreenext
## Validation Steps Performed
* [x] Touch keyboard was invoked by tapping inside the Console while Hardware Keyboard was not attached.
* [x] Selecting text worked as expected without invoking touch keyboard.
* [x] Long tapping the console invoked Touch Keyboard. I would like to confirm if this is the expected behavior.
## Summary of the Pull Request
In `settings.json` there's an `actions` array to configure keybindings.
The action `globalSummon` has an argument called `dropdownDuration`.
The settings editor deleted this argument from the settings because of a typo in `ActionArgs.h`.
## PR Checklist
* [x] Closes#11400
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
There was a `JsonUtils::GetValueForKey` instead of a `JsonUtils::SetValueForKey`.
This is what happens when such code is not autogenerated.
## Validation Steps Performed
None
## Summary of the Pull Request
Fixes the "Reset to inherited value" button for the opacity slider and removes the unwanted padding between the header and the control.
## PR Checklist
* [x] Closes#11352
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Manually tested
## Summary of the Pull Request
The code saved `args.DropdownDuration()` to a local and then called the function again, instead of using the local.
Changed to use the local.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
I think this getter simply accesses a member on `args`, it doesn't parse the settings or anything, so compiler optimizes it, but seemed to make more sense to use the local.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Try to save the working directory if we know what it is (just copied what was done in duplicating a pane). I overlooked this in my original implementation that always used the settings StartingDirectory.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#9800
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tried setting the working directory using the OSC 9;9 escape and confirmed that the directory saves correctly.
## Summary of the Pull Request
The type of the `"id"` argument of the `focusPane` action under `"actions"` in the `settings.json` schema was incorrectly set to a string.
It's actually expecting a non-negative number, and defaults to 0.
So I fixed the schema.
## PR Checklist
* [x] Closes#11393
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Documentation updated
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I've validated that a string makes Windows Terminal complain it's a string and not a number, and that a number works as expected, and that the default is indeed zero.
This commit introduces a number of poor abstractions to split
`SettingsLoader::_parse` into `_parse` for content in the format of the user's
settings.json and `_parseFragment` which is specialized for fragment files.
The latter suppresses exceptions and supports the "updates" key for profiles.
## PR Checklist
* [x] Closes#11330
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Wrote the following to
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments\test\test.json`:
```json
{
"profiles": [
{
"name": "bad",
"unfocusedAppearance": ""
},
{
"name": "good"
},
{
"updates": "{574e775e-4f2a-5b96-ac1e-a2962a402336}",
"background": "#333"
}
]
}
```
* Ensured that "bad" is ignored ✔️
* Ensured that "good" shows up and works ✔️
* Ensured that the pwsh profile has a gray background ✔️
Just like in #9760, we can't actually use the UWP file picker API, because it will absolutely not work at all when the Terminal is running elevated. That would prevent the picker from appearing at all. So instead, we'll just use the shell32 one manually.
This also gets rid of the confirmation dialog, since the team felt we didn't really need that. We could maybe replace it with a Toast (#8592), but _meh_
* [x] closes#11356
* [x] closes#11358
* This is a lot like #9760
* introduced in #11062
* megathread: #9700
## Summary of the Pull Request
The deadlock was caused by `ScreenInfoUiaProviderBase::GetSelection()` calling `TermControlUiaProvider::GetSelectionRange` (both of which attempted to lock the console). This PR removes the lock and initialization check from `TermControlUiaProvider`. It is no longer necessary because the only one that calls it is `SIUPB::GetSelection()`.
Additionally, this adds some code that was useful in debugging this race condition. That should help us figure out any locking issues that may come up in the future.
## References
#11312Closes#11385
## Validation Steps Performed
✅ Repro steps don't cause hang
## Summary of the Pull Request
Similar to `vswhere -latest`, show only the latest Visual Studio command prompts / developer PowerShell. This was tested by deleting the local package state and testing against fresh state with both VS2019 and VS2022 Preview installed, and indeed VS2022 Preview (both cmd and powershell) show. The other profiles were generated but hidden by default.
## References
Modification of PR #7774
## PR Checklist
* [x] Closes#11307
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
The sort algorithm is the same basic algorithm I used in https://github.com/microsoft/vswhere. It sorts first by installation version with a secondary sort based on the install date in case the installation versions are the same.
## Validation Steps Performed
With both VS2019 and VS2022 Preview installed, I made sure the initial state was expected, and tried different combinations of hiding and unhiding generated entries, and restarted Terminal to make sure my settings "stuck".
All these controls didn't have `Name`s assigned, and Accessibility Insights doesn't like that. Their parents did, but the actual focusable elements themselves didn't. So I've just taken the nearby headers for these things and slapped them in as the Automation names for these controls.
I verified that each of these automated tests in Accessibility Insights pass again.
* Will do the thing to #11155 but we need confirmation before that can be closed.
DESPITE the fact that there's a `Background()` API that we
could just call like:
```c++
TabViewItem().Background(deselectedTabBrush);
```
We actually can't, because it will make the part of the tab that
doesn't contain the text totally transparent to hit tests. So we
actually _do_ still need to set `TabViewItemHeaderBackground` manually.
* Regressed in #11240
* Root cause up in https://github.com/microsoft/microsoft-ui-xaml/pull/3769
* [x] closes#11294
Missed this in #11180. I forgot to init the BG opacity with the renderer on startup, because that matters when you have `"antialiasingMode": "cleartype",`.
Repro json
```json
{
"commandline": "cmd.exe",
"guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}",
"hidden": false,
"opacity": 35,
"antialiasingMode": "cleartype",
"padding": "0",
"name": "Command Prompt"
},
```
* [x] Fixes#11315
## Summary of the Pull Request
This replaces the `GridLines` enum in the renderers with a `til::enumset` type, avoiding the need for the various `WI_IsFlagSet` macros and flag operators.
## References
This is followup to PR #10492 which introduced the `enumset` class.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Validation Steps Performed
I've manually confirmed that all the different gridlines are still rendering correctly in both the GDI and DX renderers.
This logic was seemingly redundant. There's two cases I'm looking at here:
#### Case 1
```jsonc
"defaults":
{
"opacity": 35
},
"list":
[
{
"commandline": "cmd.exe",
"name": "Command Prompt"
},
```
In this case, we wouldn't set the `TerminalSettings` Opacity to .35, we'd set it to 1.0, because the profile didn't have an `opactity`.
#### Case 2
```jsonc
"defaults":
{
"useAcrylic": true
},
"list":
[
{
"commandline": "cmd.exe",
"name": "Command Prompt"
},
```
In this case we still want to have an acrylic effect. Previously, we'd default this effect to 50% opaque. I'm not sure that we can actually get that anymore. BUT it turns out, we _can_ have 100% opacity and HostBackdropAcrylic. It is very subtle, but is maybe something we should be allowing anyways. It kinda looks like:
* [x] Fixes#11355
* [x] Regressed in #11180
* [x] I work here
* [x] Fixes a bunch of the checkboxes in #11352
* [x] Fixes one of the boxes in #11353
* [x] The opacity warning -> error gibberish was fixed with the change to `DeserializationError` - `asCString` only works if the `JsonValue` is a string already.
This fixes two issues with profiles.schema.json:
* The `$schema` should not end in a `#`
* `$defs` is the official reserved keyword for schema re-use
See: http://json-schema.org/draft/2020-12/json-schema-core.html
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [x] Schema updated
## Validation Steps Performed
The previous schema didn't pass https://jschon.dev/, the new schema does.
This commit adds the ability to interact with subtrees of panes.
Have you ever thought that you don't have enough regression testing to
do? Boy do I have the PR for you! This breaks all kinds of assumptions
about what is or is not focused, largely complicated by the fact that a
pane is not a proper control. I did my best to cover as many cases as I
could, but I wouldn't be surprised if there are some things broken that
I am unaware of.
Done:
- Add `parent` and `child` movement directions to move up and down the
tree respectively
- When a parent pane is selected it will have borders all around it in
addition to any borders the children have.
- Fix focus, swap, split, zoom, toggle orientation, resize, and move to
all handle interacting with more than one pane.
- Similarly the actions for font size changing, closing, read-only, clearing
buffer, and changing color scheme will distribute to all children.
- This technically leaves control focus on the original control in the
focused subtree because panes aren't proper controls themselves. This
is also used to make sure we go back down the same path with the
`child` movement.
- You can zoom a parent pane, and click between different zoomed
sub-panes and it won't unzoom you until you use moveFocus or another
action. This wasn't explicitly programmed behavior so it is probably
buggy (I've quashed a couple at least). It is a natural consequence of
showing multiple terminals and allowing you to focus a terminal and a
parent separately, since changing the active pane directly does not
unzoom. This also means there can be a disconnect between what pane is
zoomed and what pane is active.
## Validation Steps Performed
Tested focus movement, swapping, moving panes, and zooming.
Closes#10733
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Continuation of https://github.com/microsoft/terminal/pull/10972 to handle multiple windows, requires that to be merged first.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Also closes#766
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Rough changelog:
Normally saving is triggered to occur every 30s, or sooner if a window is created/closed. The existing behavior of saving on last close is maintained to bypass that throttling. The automatic saving allows for crash recovery. Additionally all window layouts will be saved upon taking the `quit` action.
For loading we will check if we are the first window, that there are any saved layouts, and if the setting is enabled, and then depending on if we were given command line args or startup actions.
- create a new window for each saved layout, or
- take the first layout for our self and then a new window for each other layout.
This also saves the layout when the quit action is taken.
Misc changes
- A -s,--saved argument was added to the command line to facilitate opening all of the windows with the right settings. This also means that while a terminal session is running you can do wt -s idx to open a copy of window idx. There isn't a stable ordering of which idx each window gets saved as (it is whatever the iteration order of _peasants is), so it is just a cute hack for now.
- All position calculation has been moved up to AppHost this does mean we need to awkwardly pass around positions in a couple of unexpected places, but no solution was perfect.
- Renamed "Open tabs from a previous session" to "Open windows from a previous session". (not reflected in video below)
- Now save runtime tab color and window names
- Only enabled for non-elevated windows
- Add some change tracking to ApplicationState
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
`SettingsLoader::_parse` used to skip profiles which didn't have either a "guid"
or "name" field, due to #9962. This is however wrong for fragment loading, as
fragments can alternatively use an "updates" field instead of guid/name.
`SettingsLoader::_parse` was updated to allow profiles with this alternative
field during fragment loading.
## PR Checklist
* [x] Closes#11331
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Wrote the following to
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments\test\test.json`:
```json
{
"profiles": [
{
"updates": "{574e775e-4f2a-5b96-ac1e-a2962a402336}",
"background": "#FFD700"
}
]
}
```
## Summary of the Pull Request
This introduces a new TIL class that is equivalent in functionality to a `std::bitset`, but where the positions in the bitset are enum values. It also has a few additional methods allowing for setting and testing multiple positions at the same time. The idea is that this class could be used in place of the `WI_SetFlag` and `WI_IsFlagSet` macros when working with sets of flags.
## PR Checklist
* [x] Closes#10432
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #10432
## Validation Steps Performed
I've added a few unit tests that verify the behaviour of all the new methods that aren't part of `std::bitset`. I've also tried it out as a replacement for the `GridLines` enum used in the renderer, and confirmed that it has all the functionality needed to replace that cleanly.
This commit fixes layering of fragment profiles without an update key.
The previous CascadiaSettings deserializer first assembled all builtin
profiles and only then parsed the user's settings.json file.
This meant that even though fragment profiles were added to `_allProfiles`
unconditionally, they did get layered properly with user profiles regardless,
as user profiles were always properly layered.
The new CascadiaSettings approach since 168d28b was a direct translation of this
approach but this is incorrect: As the new approach reads user profiles first,
all inbox profiles, including fragments, must equally use proper layering,
instead of adding profiles unconditionally.
While this commit fixes the bug it maintains a regression:
Duplicate fragment profile GUIDs will not be detected and instead fragments with
identical GUID will all be added as parents to a single user profile.
I considered to fix this regression, but felt that this new behavior is better
than the old one, since a user often can't directly control installed fragments,
and is unlikely to occur in practice. This simplifies the implementation.
## PR Checklist
* [x] Closes#11323
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Fragment layering works ✔️
Ensures that command-lines constructed to invoke `wt` are escaped properly.
## PR Checklist
* [x] Closes#11273
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
This was broken in two places - when constructing the command-line in the shell extension and in `NewTerminalArgs::ToCommandline()`.
Both places now invoke a shared method to escape the command-line arguments that require it.
## Validation Steps Performed
Added a test and additionally:
* Invoked the shell extension from `D:\Downloads\With;Semicolon`.
* Added a `newWindow` action to `settings.json` as below and ensured the new window opened without erroring.
```json
{
"command":
{
"action": "newWindow",
"tabTitle": "\";foo\\"
},
"keys": "ctrl+shift+s"
}
```
Adds a check before every UIA function call to ensure the terminal (specifically the buffer) is initialized before doing work. Both the `ScreenInfoUiaProvider` and the `UiaTextRange` are now covered.
## References
Closes#11135#10971 & #11042
## Detailed Description of the Pull Request / Additional comments
Originally, I tried applying this heuristic to all the `RuntimeClassInitialize` on `UiaTextRangeBase` with the philosophy of "a range pointing to an invalid buffer is invalid itself", but that caused a regression on [MSFT 33353327](https://microsoft.visualstudio.com/OS/_workitems/edit/33353327).
`IUiaData` also has `GetTextBuffer()` return a `TextBuffer&`, which cannot be checked for nullness. Instead, I decided to add a function to `IUiaData` that checks if we have a valid state. Since this is shared with Conhost and Conhost doesn't have this issue, I simply make that function say that it's always in a valid state.
## Validation Steps Performed
- [X] Narrator can detect newly created terminals
- [X] (On Windows Server 2022) Windows Terminal does not hang on launch
Implements the following keyboard selection non-configurable key bindings:
- shift+arrow --> move endpoint by character
- ctrl+shift+left/right --> move endpoint by word
- shift+home/end --> move to beginning/end of line
- ctrl+shift+home/end --> move to beginning/end of buffer
This was purposefully done in the ControlCore layer to make keyboard selection an innate part of how the terminal functions (aka a shared component across terminal consumers).
## References
#715 - Keyboard Selection
#2840 - Spec
## Detailed Description of the Pull Request / Additional comment
The most relevant section is `TerminalSelection.cpp`, where we define how each movement operates. It's basically a giant embedded switch-case statement. We leverage a lot of the work done in a11y to perform the movements.
## Validation Steps Performed
- General cases:
- test all of the key bindings added
- Corner cases:
- `char`: wide glyph support
- `word`: move towards, away, and across the selection pivot
- automatically scroll viewport
- ESC (and other key combos) are still clearing the selection properly
I've done this process enough times that I should have written a script
to do it a while ago. This one is rough, but the whole changelog process
is pretty rough.
This script takes multiple revision ranges and produces something that
looks like a rough untranslated changelog, with indicators for how many
of the provided ranges had the same change (deduplicated by title.)
I use a process like this to build the Stable and Preview release notes
out of a set of revision ranges.
This introduces a spec for keyboard selection. This enables the user to create and update a selection without the use of a mouse or stylus.
## References
Contributes to #715
For some weird reason we sometimes receive a WM_KEYDOWN
message without vkey or scanCode if a user drags a tab.
The KeyChord constructor has a debug assertion ensuring that all KeyChord
either have a valid vkey/scanCode. This is important, because this prevents
accidential insertion of invalid KeyChords into classes like ActionMap.
## PR Checklist
* [x] Closes#11076
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Tab dragging doesn't produce assertion failures anymore ✔️
## Summary of the Pull Request
Fixes the 24 failing generated tests. 20 of them were fixed by enforcing the following rule: when moving backwards by word...
- a degenerate range moves to the beginning of the word, then to the word behind it.
- a non-degenerate range outright moves to the word behind it.
The fix was simple: if we're a degenerate range, check if we're at the beginning of the word. If not, move there. Otherwise, move to the word before it. See UiaTextRangeBase.cpp changes for implementation details.
Along the way, several misauthored tests were found:
- 2 generated tests:
- Cause: MS Word considers a line break a word delimiter. We don't use line-wrapping to distinguish two separate words.
- `MovementAtExclusiveEnd` backwards word movement tests:
- `end` will always be `writeTarget` because...
- [degenerate range case] both `start` and `end` are moved to the beginning of the word (`writeTarget`)
- [non-degenerate range case] from the `UiaTextRangeBase` bugfix, we should be moving to the word behind it.
- this misauthored test was explicitly found by fixing the bug first explained here.
## References
#10925 Word navigation testing
This commit reduces the code surface that interacts with raw JSON data,
reducing code complexity and improving maintainability.
Files that needed to be changed drastically were additionally
cleaned up to remove any code cruft that has accrued over time.
In order to facility this the following changes were made:
* Move JSON handling from `CascadiaSettings` into `SettingsLoader`
This allows us to use STL containers for data model instances.
For instance profiles are now added to a hashmap for O(1) lookup.
* JSON parsing within `SettingsLoader` doesn't differentiate between user,
inbox and fragment JSON data, reducing code complexity and size.
It also centralizes common concerns, like profile deduplication and
ensuring that all profiles are assigned a GUID.
* Direct JSON modification, like the insertion of dynamic profiles into
settings.json were removed. This vastly reduces code complexity,
but unfortunately removes support for comments in JSON on first start.
* `ColorScheme`s cannot be layered. As such its `LayerJson` API was replaced
with `FromJson`, allowing us to remove JSON-based color scheme validation.
* `Profile`s used to test their wish to layer using `ShouldBeLayered`, which
was replaced with a GUID-based hashmap lookup on previously parsed profiles.
Further changes were made as improvements upon the previous changes:
* Compact the JSON files embedded binary, saving 28kB
* Prevent double-initialization of the color table in `ColorScheme`
* Making `til::color` getters `constexpr`, allow better optimizations
The result is a reduction of:
* 48kB binary size for the Settings.Model.dll
* 5-10% startup duration
* 26% code for the `CascadiaSettings` class
* 1% overall code in this project
Furthermore this results in the following breaking changes:
* The long deprecated "globals" settings object will not be detected and no
warning will be created during load.
* The initial creation of a new settings.json will not produce helpful comments.
Both cases are caused by the removal of manual JSON handling and the
move to representing the settings file with model objects instead
## PR Checklist
* [x] Closes#5276
* [x] Closes#7421
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Out-of-box-experience is identical to before ✔️
(Except for the settings.json file lacking comments.)
* Existing user settings load correctly ✔️
* New WSL instances are added to user settings ✔️
* New fragments are added to user settings ✔️
* All profiles are assigned GUIDs ✔️
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#11083#11143
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
While testing the save/quit features a number of issues were found that were caused by poor synchronization on the monarch, resulting in various unexpected crashes. Because this uses std collections, and I didn't see any builtin winrt multithreaded containers I went with the somewhat heavy-handed mutex approach.
e.g.
- https://github.com/microsoft/terminal/pull/11083#issuecomment-916218353
- https://github.com/microsoft/terminal/pull/11083#issuecomment-916220521
- https://github.com/microsoft/terminal/pull/11143/#discussion_r704738433
This also makes it so that on quit peasants don't try to become the monarch, and the monarch closes their peasant last to prevent elections from happening.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Create many windows (hold down ctrl-shift-n) then use the quit action from peasants/the monarch to make sure everything closes properly.
[Git2Git] Merged PR 6303114: Prepare command history before COOKED_READ in tests
PR !6278637 introduced a dependency from COOKED_READ_DATA on the ability
to locate a command history for a process handle (here, `nullptr`).
The tests were blowing up because no such history had been allocated.
Closes MSFT-34812916
Closes MSFT-34813774
Closes MSFT-34815941
Closes MSFT-34817558
Closes MSFT-34817540 (Watson)
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev f7517e686447fc0469f6b83df19760dc3dafd577
This is equivalent to commit 8779249b1, but reflected from the OS repository.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a4d67e9b05039f365a1a0c58e9c63474c58073a1
Related work items: MSFT-34777060
Process exit code now shows as hex not decimal. Format specification needs length "10" not "8" because the leading '0x' generated by the # symbol counts as part of the length.
## PR Checklist
* [x] Closes annoyance at looking up process exit codes
* [x] I work here.
* [x] Checked manually
## Validation Steps Performed
- [x] Ran it, opened tab, opened another CMD tab, ran `exit <code>` and observed hex pattern
## Summary of the Pull Request
Clears selection render on paste
## PR Checklist
* [x] Closes#11227
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
Added ```_renderer->TriggerSelection(); ``` similarly to the copy action few lines up in ```CopySelectionToClipboard``` function
## Validation Steps Performed
Manually tested
* this is the same thing as #10996, but with the fix that caused us to #11031
* This includes https://github.com/microsoft/microsoft-ui-xaml/pull/3769, so we had to make some adjustments to how we handle tab colors. It works the same as before.
* Should enable #11231 to be started
* [x] Closes#10508
* [x] Closes#7133
* [x] Closes#8948
* [ ] I need to finish letting my 19H1 VM boot to make sure unpackaged still works
## Summary of the Pull Request
Adds support for vintage style opacity, on Windows 11+. The API we're using for this exists since the time immemorial, but there's a bug in XAML Islands that prevents it from working right until Windows 11 (which we're working on backporting).
Replaces the `acrylicOpacity` setting with `opacity`, which is a uint between 0 and 100 (inclusive), default to 100.
`useAcrylic` now controls whether acrylic is used or not. Setting an opacity < 100 with `"useAcrylic": false` will use vintage style opacity.
Mouse wheeling adjusts opacity. Whether acrylic is used or not is dependent upon `useAcrylic`.
`opacity` will stealthily default to 50 if `useAcrylic:true` is set.
## PR Checklist
* [x] Closes#603
* [x] I work here
* [x] Tests added/passed
* [x] https://github.com/MicrosoftDocs/terminal/pull/416
## Detailed Description of the Pull Request / Additional comments
Opacity was moved to AppearanceConfig. In the future, I have a mind to allow unfocused acrylic, so that'll be important then.
## Validation Steps Performed
_just look at it_
Adjust tools version for folks running on 2022
## PR Checklist
* [x] Closes annoyance that @lhecker and I have selfhosting VS2022
* [x] I work here
* [x] Solution built
* [x] @dhowett said something like "lol sure" in Teams.
## Summary of the Pull Request
Updates our `UiaTextRange` to no longer treat the end of the buffer as the "document end". Instead, we consider the "document end" to be the line beneath the cursor or last legible character (whichever is further down). In the event where the last legible character is on the last line of the buffer, we use the "end exclusive" position (left-most point on a line one past the end of the buffer).
When movement of any kind occurs, we clamp each endpoint to the document end. Since the document end is an actual spot in the buffer (most of the time), this should improve stability because we shouldn't be pointing out-of-bounds anymore.
The biggest benefit is that this significantly improves the performance of word navigation because screen readers no longer have to take into account the whitespace following the end of the prompt.
Word navigation tests were added to the `TestTableWriter` (see #10886). 24 of the 85 tests were failing, however, they don't seem to interact with the document end, so I've marked them as skip and will fix them in a follow-up. This PR is large enough as-is, so I'm hoping I can take time in the follow-up to clean some things on the side (aka `preventBoundary` and `allowBottomExclusive` being used interchangeably).
## References
#7000 - Epic
Closes#6986Closes#10925
## Validation Steps Performed
- [X] Tests pass
- [X] @codeofdusk has been personally testing this build (and others)
When we're elevated, we disable drag/dropping tabs when elevated, because of a platform limitation that causes the app to _crash_ (see #4874). However, if the user has UAC disabled, this actually works alright. So I'm adding it back in that case.
I'm not positive if this is the best way to check if UAC is disabled, but normally, you'll get a [`TokenElevationTypeFull`] when elevated, not `TokenElevationTypeDefault`. If the app is elevated, but there's not a split token, that kinda implies there's no user account separation. If I'm wrong, it's just code, let's replace this with something that does work.
## Validation Steps Performed
Booted up a Win10 VM, set `enableLUA` to `0`, rebooted, and checked if this exploded. It didn't.
References #4874
References #3581
Work done in pursuit of #11096Closes#7754
[`TokenElevationTypeFull`]: https://docs.microsoft.com/en-us/windows/win32/api/winnt/ne-winnt-token_elevation_type
This commit aligns the COM-consuming code in VsSetupInstance with best
practices such as passing COM pointers by pointer when they do not need
to be owning references and not using `const` on members, as well as
cleans up some dead code.
Leonard contributed clang-tidy fixes and some reference passing
changes.
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
This commit adds dynamic profile generators for Visual Studio Developer
Command Prompt (VS2017+) and Visual Studio Developer PowerShell
(VS2019.2+)
Tested manually by deploying locally. My local environment has four
instances of VS installed, one VS2017 and multiple channels of VS2019.
We're wrapping the COM Visual Studio Setup Configuration API to query
for VS instances and retrieve the relevant properties. Two different
namespaces are used so the end-user can turn off one or the other. For
instance, end user may prefer to always use Developer PowerShell.
## Validation Steps Performed
1. Build locally using Visual Studio 2019
2. Deploy CascadiaPackage
3. Verify entries exist in profiles menu
4. Verify entries exist in settings.json
5. Open each profile
6. Validate start-in directory
7. Validate environment variables are as expected
8. Uninstall Windows Terminal - Dev package
9. Repeat.
Closes#3821
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds directional modifiers for SplitState and convert those to the appropriate horizontal/vertical when splitting a pane.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4340
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
"vertical" and "horizontal" splits were removed from `defaults.json`, but code was added to parse those as `right` and `down` respectively. It is also the case that if a user has a custom hotkey for `split: vertical` it will override the default for `split: right`.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Split the pane using each of the new directional movements
## Summary of the Pull Request
Fixes the serialisation of the findMatch action so that the direction is stored.
## PR Checklist
* [x] Closes#11225
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Added a test and tested manually.
This PR simply replaces all uses of "TrayIcon" and "Tray" with "NotificationIcon" and "NotificationArea" to be more accurate. Originally I kinda wanted to only replace all occurrences of it in settings and user facing things, but I figured I might as well make it consistent throughout all of our code.
Fix infinite loop when trying to summon a window after close.
In #10972 code was added to try to clean up state manually when a window
was closed instead of waiting for it to be detected as a dead peasant.
Unfortunately I didn't know any better and missed cleaning up
`_mruPeasants` as well. The result is there would be an infinite loop
in `_getMostRecentPeasant` since `_getPeasant` will only clean up ids if
it finds a peasant, not if it doesn't find anything. This is the minimal
change to get this working, but it might be a good idea to make
`_getPeasant` be more thorough about cleanup.
## Validation Steps Performed
Tested that before the change we infinitely loop, and after the change
we summon correctly.
Closes#11215
This pull request moves us to Microsoft.Windows.CppWinRT 2.0.210825.3.
Notable improvements from 2.0.210309.3:
* Restored Windows 7 functionality
* C++20 ranges support
* `capture` now works with a raw pointer
* `hstring::starts_with` and `hstring::ends_with` (C++20)
Unit/Functional Tests:
Summary: Total=7728, Passed=7571, Failed=10, Blocked=0, Not Run=0, Skipped=147
Local Tests:
Summary: Total=163, Passed=158, Failed=5, Blocked=0, Not Run=0, Skipped=0
The above failures are (1) in UIA tests for conhost/WT (which do not work here) or
(2) in already known-broken local tests.
## Summary of the Pull Request
Basically undoes #10988 in favour of implementing it as described in #11018
## PR Checklist
* [x] Closes#11018
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [X] Schema updated.
* [x] I work here
## Validation Steps Performed
- alt+space opens the system menu by default
- when alt+space is bound, the keys do not get send to terminal
- right-click on the tab bar didn't break (still opens system menu at the location of the cursor)
## Summary of the Pull Request
* Introduces info bar shown upon session failure,
that guides the user how to configure termination behavior
* Allows this info bar to be dismissed permanently (choice stored in state)
* Allows "keyboard service" info bar to be dismissed permanently
## PR Checklist
* [x] Closes#10798, #8699
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
UI:
* Introduce an additional info bar for "close on exit" configuration tip
* Stack this bar after "keyboard service" bar
* Add "Don't show again" button to both bars
Dismiss Permanently:
* Introduce a set of "dismissed messages" to the Application State
* Add verification the message is not dismissed before showing an info bar
* "Don't show again" persists the choice under "dismissed messages"
Wiring the Info Bar:
* Register `TerminalPage` on `TermControl`'s `ConnectionStateChanged` event
* Once event is triggered check whether the state is failure
* If so and the message was not dismissed permanently, show the info bar
Add the ability to quit all terminal instances. Doing this separately from the window layout saving ones to lessen the number of 1k+ line monsters I make y'all review.
## References
#11083
## PR Checklist
* [x] Closes#11081
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
## Detailed Description of the Pull Request / Additional comments
- Warn the user before they do so to give a chance to cancel
- Percolate a QuitAll event up to the monarch who then directs each peasant to clsoe.
- Leave a window-layout-saving-sized hole to add that feature on top
## Validation Steps Performed
- quit with one window (from the monarch)
- quit from the monarch with multiple windows
- quit from a peasant
- cancel the quit dialog
This PR adds support for the `DECRQSS` (Request Selection or Setting)
escape sequence, which is a standard VT query for reporting the state of
various control functions. This initial implementation only supports
queries for the `DECSTBM` margins, and the `SGR` graphic rendition
attributes.
This can be useful for certain forms of capability detection (#1040). As
one example in particular, it can serve as an alternative to the
`COLORTERM` environment variable for detecting truecolor support
(#11057).
Of the settings that can be queried by `DECRQSS`, the only other one
that we could be supporting at the moment is `DECSCUSR` (Cursor Style).
However, that would require passing the query through to the conpty
client, which is a lot more complicated, so I thought it best to leave
for a future PR.
For now this gets the basic framework in place, so we are at least
responding to queries, and even just supporting the `SGR` attributes
query is useful in itself.
Validation
----------
I've added a unit test verifying the reports for the `DECSTBM` and `SGR`
settings with a range of different parameters. I've also tested the
`DECSTBM` and `SGR` reports manually in _Vttest_, under menu 11.2.5.3.6
(Status-String Reports).
This commit adds initial support for saving window layout on application
close.
Done:
- Add user setting for if tabs should be maintained.
- Added events to track the number of open windows for the monarch, and
then save if you are the last window closing.
- Saves layout when the user explicitly hits the "Close Window" button.
- If the user manually closed all of their tabs (through the tab x
button or through closing all panes on the tab) then remove any saved
state.
- Saves in the ApplicationState file a list of actions the terminal can
perform to restore its layout and the window size/position
information.
- This saves an action to focus the correct pane, but this won't
actually work without #10978. Note that if you have a pane zoomed, it
does still zoom the correct pane, but when you unzoom it will have a
different pane selected.
Todo:
- multiple windows? Right now it can only handle loading/saving one
window.
- PR #11083 will save multiple windows.
- This also sometimes runs into the existing bug where multiple tabs
appear to be focused on opening.
Next Steps:
- The business logic of when the save is triggered can be adjusted as
necessary.
- Right now I am taking the pragmatic approach and just saving the state
as an array of objects, but only ever populate it with 1, that way
saving multiple windows in the future could be added without breaking
schema compatibility. Selfishly I'm hoping that handling multiple
windows could be spun off into another pr/feature for now.
- One possible thing that can maybe be done is that the commandline can
be augmented with a "--saved ##" attribute that would load from the
nth saved state if it exists. e.g. if there are 3 saved windows, on
first load it can spawn three wt --saved {0,1,2} that would reopen the
windows? This way there also exists a way to load a copy of a previous
window (if it is in the saved state).
- Is the application state something that is planned to be public/user
editable? In theory the user could since it is just json, but I don't
know what it buys them over just modifying their settings and
startupActions.
Validation Steps Performed:
- The happy path: open terminal -> set setting to true -> close terminal
-> reopen and see tabs. Tested with powershell/cmd/wsl windows.
- That closing all panes/tabs on their own will remove the saved
session.
- Open multiple windows, close windows and confirm that the last window
closed saves its state.
The generated file stores a sequence of actions that will be executed to
restore the terminal to its saved form.
References #8324
This is also one of the items on microsoft/terminal#5000Closes#766
## Summary of the Pull Request
Make sure to always synchronously set the selected tab. This way when changing tabs while running multiple actions further calls to _GetFocusedTab will return the correct one.
**Edit** #11146 discovered while trying to test this so while I fixed the case I wanted, things seem to be broken generally so it is hard for me to test if I broke anything else.
## References
## PR Checklist
* [x] Closes#11107
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Ran the command specified in the issue and confirmed that the correct tab was focused and that the correct pane was zoomed.
## Summary of the Pull Request
Disables autocorrect for command, path and find text inputs. Does not disable it for profile names, tab titles or colour scheme names.
## PR Checklist
* [x] Closes#11133
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Manually typed `bash -i -l` into the profile command text input and found it no longer auto-capitalised the I.
## Summary of the Pull Request
This adds a new action, `clearBuffer`. It accepts 3 values for the `clear` type:
* `"clear": "screen"`: Clear the terminal viewport content. Leaves the scrollback untouched. Moves the cursor row to the top of the viewport (unmodified).
* `"clear": "scrollback"`: Clear the scrollback. Leaves the viewport untouched.
* `"clear": "all"`: (**default**) Clear the scrollback and the visible viewport. Moves the cursor row to the top of the viewport (unmodified).
"Clear Buffer" has also been added to `defaults.json`.
## References
* From microsoft/vscode#75141 originally
## PR Checklist
* [x] Closes#1193
* [x] Closes#1882
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is a bit tricky, because we need to plumb it all the way through conpty to clear the buffer. If we don't, then conpty will immediately just redraw the screen. So this sends a signal to the attached conpty, and then waits for conpty to draw the updated, cleared, screen back to us.
## Validation Steps Performed
* works for each of the three clear types as expected
* tests pass.
* works even with `ping -t 8.8.8.8` as you'd hope.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Make it so you can navigate pane focus without unzooming.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7215
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
- Slight refactor to bring the MRU pane logic into the `NavigateDirection` function
- The actual zoom behavior was not a problem, the only issue is that because most of the panes weren't in the UI tree I had to disable using the actual sizes. There is nothing wrong with that, since the synthetic sizing is required anyways, but I'm curious what other peoples' thoughts are.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
Remove those imports as they are unnecessary, _template.py_ contains these too but I guess it's fine since it's a template after all
## Summary of the Pull Request
**Naive implementation** of exporting the text buffer of the current pane
into a text file triggered from the tab context menu.
**Disclaimer: this is not an export of the command history,**
but rather just a text buffer dumped into a file when asked explicitly.
## References
Should provide partial solution for #642.
## Detailed Description of the Pull Request / Additional comments
The logic is following:
* Open a file save picker
* The location is Downloads folder (should be always accessible)
* The suggest name of the file equals to the pane's title
* The allowed file formats list contains .txt only
* If no file selected stop
* Lock terminal
* Read all lines till the cursor
* Format each line by removing trailing white-spaces and adding CRLF if not wrapped
* Asynchronously write to selected file
* Show confirmation
As the action is relatively fast didn't add a progress bar or any other UX.
As the buffer is relatively small, holding it entirely in the memory rather than
writing line by line to disk.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add a new action that can contain multiple other actions.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#3992
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Creates a shortcut action that allows a list of actions to be specified as arguments. Steals a bunch of the serialization code from my other pr. Overall, because I had the serialization code written already, this was remarkably easy.
I can't think of any combined action to be added to the defaults, so I think this is just a thing for the documentation unless someone else has a good example. I know there are lot of times when the recommended workaround is "make an action with commandline wt.exe ..." and this could be a good replacement for that, but that is all personalized.
I didn't add this to the command line parsing, since the command line is already a way to run multiple actions.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Created a new command, confirmed that "Move right->down" showed up in the command palette, and that running it did the correct behavior (moving right one pane, then down one pane).
```
{
"command": {
"action": "multipleActions",
"name": "Move right->down",
"actions": [
{"action": "moveFocus", "direction": "right" },
{"action": "moveFocus", "direction": "down" },
]
}
}
```
The first time you open commandline mode, `recentCommands` doesn't exist yet. However, we immediately try to read the `Size()` in a couple places. This'll A/V and we'll crash 😨
The fix is easy - don't try and read the size of the non-existent `recentCommands`
Found this while playing with #11069
Regressed in #11030
Didn't bother filing an issue for it when I have the fix in hand
This update fixes some minor ligature issues, font selection issues and
a problem with the Hebrew letter Vav when combined with Holam.
See microsoft/cascadia-code#538 for more details.
This is on me. When I got rid of the `_updatePatternLocations` `ThrottledFunc` in the `TermControl`, I didn't add a matching call to `_updatePatternLocations->Run()` in this method.
In #9820, in `TermControl::_ScrollPositionChanged`, there was still a call to `_updatePatternLocations->Run();`. (TermControl.cpp:1655 on the right) https://github.com/microsoft/terminal/pull/9820/files#diff-c10bb023995e88dac6c1d786129284c454c2df739ea547ce462129dc86dc2697R1654#10051 didn't change this
In #10187 I moved the `_updatePatternLocations` throttled func from termcontrol to controlcore. Places it existed before:
* [x] `TermControl::_coreReceivedOutput`: already matched by ControlCore::_connectionOutputHandler
* [x] `TermControl::_ScrollbarChangeHandler` -> added in c20eb9d
* [x] `TermControl::_ScrollPositionChanged` -> `ControlCore::_terminalScrollPositionChanged`
## Validation Steps Performed
Print a URL, scroll the wheel: it still works.
Closes#11055
This commit adds the ability to target the first pane in the tree,
always.
I wasn't able to find an existing issue for this, it is just a personal
feature for me. I won't be heartbroken if it does not get merged.
As motivation, I frequently have setups where the thing I am primarily
working on is a large pane on the left and everything else is in smaller
panes positioned elsewhere. I like to have one hotkey where I can go to
any pane and then make it the "primary" pane if I am changing what I am
working on or need to focus on another set of code/documentation/etc.
## Validation Steps Performed
Confirmed that the move focus and swap pane variants both affect the
correct pane.
Moves PGO runs to supported Helix pools. We need to match Microsoft-UI-XAML on which Helix pools we used for each type of activities.
## PR Checklist
* [x] Closes#10850
* [x] I work here
* [x] If it builds, it sits.
## Validation Steps Performed
* [x] Run PGO build against this branch
When moving a pane to a new tab previously we removed the event handlers
on it as if we were closing it, but we are just moving it so we need to
keep them.
I tried really hard to make sure all of the events were hooked up
correctly, but I guess I missed these originally since they are normally
created in the Pane constructor.
Closes#11035
## Validation Steps Performed
created panes, moved them to new tabs, confirmed that they close and
ding appropriately.
This pull request introduces our first use of the "base" profile as an
actual profile. Incoming commandlines from `wt foo` *and* default
terminal handoffs will be hosted in the base profile.
**THIS IS A BREAKING CHANGE** for user behavior.
The original behavior where commandlines were hosted in the "default"
profile (in most cases, Windows PowerShell) led to user confusion: "why
does cmd use my powershell icon?" and "why does the title say
PowerShell?". Making this change unifies the user experience so that we
can land commandline detection in #10952.
Users who want the original behavior can get it back for commandline
invocation by specifying a profile using the `-p` argument, as in `wt -p
PowerShell -- cmd`.
As a temporary stopgap, users who attempt to duplicate the base profile
will get their specified default profile until we land #5047.
This feature is hidden behind the same feature flag that controls the
visibility of base/"Defaults" in the settings UI.
Fixes#10669
Related to #6776
Only focus if there is a control to focus (which may be null if e.g. the focused tab is being destroyed)
Closes#11037
## Additional comments
I tried to remove the _activePane = nullptr in `TerminalTab::DetachPane` but that actually completely broke being able to focus the control at all making the tab completely unusable. Focus does seem to transfer just fine here with this change.
## Validation Steps Performed
Used the command execution to move panes to and from existing panes, including new tabs and destroying tabs.
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/1032-elevation-qol/doc/specs/%235000%20-%20Process%20Model%202.0/%231032%20-%20Elevation%20Quality%20of%20Life%20Improvements.md) ⇐
## Summary of the Pull Request
Despite my best efforts to mix elevation levels in a single Terminal window, it seems that there's no way to do that safely. With the dream of mixed elevation dead, this spec outlines a number of quality-of-life improvements we can make to the Terminal today. These should make using the terminal in elevated scenarios better, since we can't have M/E.
### Abstract
> For a long time, we've been researching adding support to the Windows Terminal
> for running both unelevated and elevated (admin) tabs side-by-side, in the same
> window. However, after much research, we've determined that there isn't a safe
> way to do this without opening the Terminal up as a potential
> escalation-of-privilege vector.
>
> Instead, we'll be adding a number of features to the Terminal to improve the
> user experience of working in elevated scenarios. These improvements include:
>
> * A visible indicator that the Terminal window is elevated ([#1939])
> * Configuring the Terminal to always run elevated ([#632])
> * Configuring a specific profile to always open elevated ([#632])
> * Allowing new tabs, panes to be opened elevated directly from an unelevated
> window
> * Dynamic profile appearance that changes depending on if the Terminal is
> elevated or not. ([#1939], [#8311])
## PR Checklist
* [x] Specs: #1032, #632
* [x] References: #5000, #4472, #2227, #7240, #8135, #8311
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
### Why are these two separate documents?
I felt that the spec that is currently in review in #7240 and this doc should remain separate, yet closely related documents. #7240 is more about showing how this large set of problems discussed in #5000 can all be solved technically, and how those solutions can be used together. It establishes that none of the proposed solutions for components of #5000 will preclude the possibility of other components being solved. What it does _not_ do however is drill too deeply on the user experience that will be built on top of those architectural changes.
This doc on the other hand focuses more closely on a pair of scenarios, and establishes how those scenarios will work technically, and how they'll be exposed to the user.
- When deciding whether to call `_AnalyzeFontFallback`, also check if the user set any font axes
- Do not use the user set weight if we are setting the weight due to the bold attribute
- When calling `FontFaceWithAttribute`, check if the user set the italic axis as well as the text attribute
* [x] Closes#10852
* [x] Closes#10853
It was insufficient to only promote commandline components to titles
during commandline parsing, because we also have a whole complement of
actions that contain NewTerminalArgs. The tests caught me out a little
too late (sorry!). I decided it was better move promotion down to
TerminalSettings.
Fixes#6776
Re-implements #10998
During startup we do not have real dimensions, so we have to guess what
our dimensions should be based off of the splits.
We'll augment the state of the pane search to also have a size in each
dimension that gets incrementally upgraded as we recurse through the
tree.
References #10978
If both of the following are true
1. alt+space is not explicitly unbound
2. alt+space is not bound to a command
Then the window procedure will handle the alt+space to open up the context menu.
In this case, we need to make sure we don't send the keys to terminal.
Closes#10935
## Summary of the Pull Request
Follow-up for #10886. The new UIA movement tests found some failing cases. This PR fixes UiaTextRangeBase to have movement match that of MS Word. In total, this fixes 64 tests.
## PR Checklist
* [X] Closes#10924
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
Root causes include...
1. if we were a non-degenerate range and we failed to move, we should still expand to enclose the unit
2. non-degenerate ranges are treated as if they already encompassed their given unit.
- this one is a bit difficult to explain. Consider these examples:
1. document movement
- state: you have a 1-cell wide range on the buffer, and you try to move by document
- result: move by 0 (there is no next/prev document), but the range now encompasses the entire document
2. line movement
- state: you have a 1-cell wide range on a line, and you try to move back by a line
- result: you go to the previous line (not the beginning of this line)
- conversely, a degenerate range successfully moves to the beginning/end of the current unit (i.e. document/line)
- this (bizarre) behavior was confirmed using MS Word
As a bonus, occasionally, Narrator would get stuck when navigating by line. This issue now seems to be fixed.
## Updates to existing tests
- `CanMoveByCharacter`
- `can't move backward from (0, 0)` --> misauthored, result should be one character wide.
- `can't move past the last column in the last row` --> misauthored and already covered in generated tests
- `CanMoveByLine`
- `can't move backward from top row` --> misauthored, end should be on next line. Already covered by generated tests
- `can't move forward from bottom row` --> misauthored, end should be on next line
- `can't move backward when part of the top row is in the range` --> misauthored, should expand
- `can't move forward when part of the bottom row is in the range` --> misauthored, degenerate range moves to end of buffer
- `MovementAtExclusiveEnd`
- populate the text buffer _before_ we do a move by word operation
- update to match the now fixed behavior
This PR converts the WSL distro generator to use the registry to lookup
WSL distros instead of trying to parse the results of `wsl.exe`.
`wsl.exe` sometimes takes a very long time to launch the WSL service,
which means that on the first launch of the Terminal, WSL distros can
sometimes be missing entirely!
## References
* Also related is #6160, but I feel that deserves a separate PR for
warning when the default profile is a dynamic profile who's source
indicated it was gone.
## PR Checklist
* [x] Closes#9905
* [x] Closes#7199
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is maybe a little BODGY, but hey we get tons of reports of this
root cause.
## Validation Steps Performed
Ran it locally, it did well. Ran a `wsl --shutdown`, then booted the
terminal - seemed to do well. I never was able to repro the slowness
myself, but I'd suspect this'll fix it.
## Summary of the Pull Request
Since the days immemorial of the Terminal, the TermControl has auto-focused itself when it finalizes its layout. This has led to the problem that `wt ; sp ; sp ; sp...` ends up focusing one of these panes at random.
This PR fixes this issue by getting rid of the auto-focusing. Panes now manually get focused when created. We manually focus the active pane when a commandline is dispatched. since we're internally tracking "active" separate from "focused", this ends up working as you'd hope.
## References
## PR Checklist
* [x] Closes#6586
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I also had to turn the cursor off by default. Most `TermControl`s would never get the `LostFocus` event, so their cursors would get left `On`, and that's not right.
## Validation Steps Performed
I've run the following things a bunch of times to make sure they work:
* `wtd sp ; sp ; sp`
* `wtd sp ; sp ; sp ; fp -t 0`
* `newTab`
* `splitPane`
* use the command palette to do the above as well
Where the result used to be random (cases 1 & 2), the result is exactly what you'd expect now.
It doesn't work at all for
```
wtd sp ; sp ; sp ; mf left
```
Presumably because we can't `move-focus` directionally during startup. However, that doesn't work _today_ either, so it's not making it worse. Just highlights that single scenario doesn't work right.
* Perform the handling of partial code points in the `u8u16` and `u16u8`
conversion functions without preparation in a preliminary buffer.
* Simplify partials handling in `u8u16` (perf).
* Declare the parameters for the incoming data as referenced
string_views.
* Simplify templatization.
* Simplify exception handling.
We complete the partial codepoint in the 4-bytes long cache and convert
it separately. This makes the cache ready for capturing the next
partials before the remaining string is converted. This way, we neither
need to copy the whole string into a buffer which contains complete
codepoints, nor do we need to allocate an unnecessarily long buffer
which exists for the life time of the state class instance.
Finding and capturing of partials is performed in a more linear code
using the evaluation of the length of a code point.
The parameters for the incoming data are now explicitely declared to be
referenced string_views.
`CATCH_RETURN` is used to improve the readability of the code.
## Validation Steps Performed
* manually tested
* unit tests passed
Closes#10946
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
Re-enables the delete button for generated profiles in the settings UI.
Additionally fixes "Startup Profiles" to only list active profiles.
Profiles are considered deleted if they're absent from settings.json, but their
GUID has been encountered before. Or in other words, from a user's perspective:
Generated profiles are added to the settings.json automatically only once.
Thus if the user chooses to delete the profile (e.g. using the delete button)
they aren't re-added automatically and thus appear to have been deleted.
Meanwhile those generated profiles are actually only marked as "hidden"
as well as "deleted", but still exist in internal profile lists.
The "hidden" attribute hides them from all existing menus. The "deleted" one
hides them from the settings UI and prevents them from being written to disk.
It would've been preferrable of course to just not generate and
add deleted profile to internal profile lists in the first place.
But this would've required far more wide-reaching changes.
The settings UI for instance requires a list of _all_ profiles in order to
allow a user to re-create previously deleted profiles. Such an approach was
attempted but discarded because of it's current complexity overhead.
## References
* Part of #9997
* A sequel to 5d36e5d
## PR Checklist
* [x] Closes#10960
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* "Startup Profiles" doesn't list deleted profiles ✔️
* Manually removing an item from settings.json removes the profile ✔️
* Removing cmd.exe and saving doesn't create empty objects (#10960) ✔️
* "Add a new profile" lists deleted profiles ✔️
* "Duplicate" recreates previously deleted profiles ✔️
* Profiles are always created with GUIDs ✔️
The original code for settings reload iterated the entire tree of panes
for every profile in the new settings (O(mn)) and constructed a
TerminalSettings object for every profile even if it later went unused.
This implementation:
1. Collects all new profiles keyed by guid
1.a. Adds the "defaults" profile to the map
2. Iterates every pane, just once, and updates its profile if it shows
up in the list by GUID.
I've merged all of the per-tab code into a single loop.
Because of 1.a., this code can now update panes that are hosting the
"base" profile.
Right now, we store GUIDs in panes and most of the functions for interacting
with profiles on the settings model take GUIDs and look up profiles.
This pull request changes how we store and look up profiles to prefer profile
objects. Panes store strong references to their originating profiles, which
simplifies settings lookup for CloseOnExit and the bell settings. In fact,
deleting a pane's profile no longer causes it to forget which CloseOnExit
setting applies to it. Duplicating a pane that is hosting a deleted profile
(#5047) now duplicates the profile, even though it is otherwise unreachable.
This makes the world more consistent and allows us to _eventually_ support panes
hosting profiles that do not have GUIDs that can be looked up in the profile
list. This is a gateway to #6776 and #10669, and consolidating the profile
lookup logic will help with #10952.
PR #10588 introduced TerminalSettings::CreateWithProfile and made
...CreateWithProfileByID a thin wrapper over top it, which looked up the profile
by GUID before proceeding. It has also been removed, as its last caller is gone.
Closes#5047
This supports a future world where we give commandline-only invocations
their own tabs. It was easier to promote the commandline to a title at
the time of argument parsing, rather than later, but I am happy to
change this if anyone disagrees.
Add support for acrylic in the titlebar
## PR Checklist
* [x] CLA signed
## Detailed Description of the Pull Request / Additional comments
This seems to be a highly requested feature and seeing as #5772 was closed I thought it made sense to make a PR for this.
## Validation Steps Performed
Checked that acrylic works in both dark and light modes and switching between them still works. Also checked that acrylic in the tab row still works when tabs in titlebar is disabled.
Currently, the monarch window will show itself when opening the tray icon context menu. This is because a window must be set as the foreground window when the context menu opens, otherwise the menu won't be able to be dismissed when clicking outside of the context menu.
This PR makes the tray icon create a non visible/interactable window for the sole purpose of being set as the foreground window when the tray icon's context menu is opened. Then none of the terminal windows should be set as the foreground window when opening the context menu.
Closes#10936
## Summary of the Pull Request
Pretty straightforward. Check if the scroll event is a horizontal movement. If it is, ignore it. We don't have a horizontal scrollbar.
## References
* obviously, revisit this if we ever do #1860
## PR Checklist
* [x] Closes#10329
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* scrolled ↑/↓ with slaptop trackpad: terminal scrolls.
* scrolled ←/→ with slaptop trackpad: terminal doesn't scroll.
* Scrolling _slightly more vertically than horizontally_ still scrolls.
* Scrolling _slightly more horizontally than vertically_ doesn't scroll.
When our text buffer is full, newlines cause the buffer to scroll underneath the viewport (rather than the viewport moving down). This was causing selections made during text output to scroll down. To solve this, when we increment the circular buffer, we decrement the y-coordinates of the current selections by 1. We also invalidate the previous selection rects.
Closes#10319
This commit moves us from MUX 2.5 to MUX 2.6. I have temporarily
disabled the new control styles in `TerminalApp\App.xaml` by setting
`ControlsResourcesVersion` to `Version1`. There is no significant expected
visual impact.
Closes#10508
This commit partially reverts d465a47 and introduces an alternative approach by adding Hash and Equals methods to the KeyChords class. Those methods will now favor any existing Vkeys over ScanCodes.
## PR Checklist
* [x] Closes#10933
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Added a new test, which is ✔️
* Various standard commands still work ✔️
* Hash() returns the same value for all KeyChords that are Equals() ✔️
Introduces a new methodology to maintain tests for UI Automation. This includes...
- `UiaTests.csv`: an excel spreadsheet designed to store UIA movement tests in a compact format
- `GeneratedTests.ps1`: a PowerShell script that imports `UiaTests.csv` and outputs a C++ TEST_METHOD for `UiaTextRangeTests.
This new system can be used to easily add more UIA movement tests.
Read https://github.com/microsoft/terminal/blob/dev/cazamor/a11y-7000/testing/tools/TestTableWriter/README.md for more details.
Follow-up work items:
- #10924 **Failing Tests**: this found some failing tests. We should make them not fail.
- #10925 **Missing Tests: Word navigation**: Word navigation is missing.
- #10926 **MoveEndpoint Tests**: an additional column can be added to the CSV "EndpointTarget", which can be "start", "end", or "both". This will allow us to test `MoveEndpoint` in addition to `Move`.
Some followups to #10368:
- Accidentally reverted a defapp change where the Monarch should not by default register itself as a handoff server.
- Destroy the tray icon if we're a monarch otherwise if we're a quake window we request the monarch to hide the icon.
When creating `startupAction` use `TabSwitcherMode::Disabled` in action args
to disable the tab switcher and prevent MRU logic to be applied.
Closes#10070
## Summary of the Pull Request
The bug was that Narrator would still read the content of the old tab/pane although a new tab/pane was introduced. This is caused by the automation peer not being created when XAML requests it. Normally, we would prevent the automation peer from being created if the terminal was not fully initialized.
This change allows the automation peer to be created regardless of the terminal being fully initialized by...
- `TermControl`: `_InitializeTerminal` updates the padding (dependent on the `SwapChainPanel`) upon full initialization
- `ControlCore`: initialize the `_renderer` in the ctor so that we can attach the UIA Engine before `ControlCore::Initialize()` is called (dependent on `SwapChainPanel` loading)
As a bonus, this also fixes a locking issue where logging would attempt to get the text range's text and lock twice. The locking fix is very similar to #10937.
## PR Checklist
Closes [MSFT 33353327](https://microsoft.visualstudio.com/OS/_workitems/edit/33353327)
## Validation Steps Performed
- New pane from key binding is announced by Narrator
- New tab from key binding is announced by Narrator
Adds new in-order traversal for MoveFocus and SwapPane actions.
Refactors the Pane methods to share a `NavigateDirection`
implementation.
Closes#10909
A large amount of the churn here is just renaming some of the things for
directional movement to reflect that it might not always be based on the
focused pane. `NextPane` and `PreviousPane` are the functions that
actually select the next/previous pane respectively and are the core
component of this PR.
VALIDATION
Created multiple panes on a tab, and tried both forward and backwards
movements with move-focus and swap-pane.
## Summary of the Pull Request
This adds a new setting `intenseTextStyle`. It's a per-appearance, control setting, defaulting to `"all"`.
* When set to `"all"` or `["bold", "bright"]`, then we'll render text as both **bold** and bright (1.10 behavior)
* When set to `"bold"`, `["bold"]`, we'll render text formatted with `^[[1m` as **bold**, but not bright
* When set to `"bright"`, `["bright"]`, we'll render text formatted with `^[[1m` as bright, but not bold. This is the pre 1.10 behavior
* When set to `"none"`, we won't do anything special for it at all.
## references
* I last did this in #10648. This time it's an enum, so we can add bright in the future. It's got positive wording this time.
* ~We will want to add `"bright"` as a value in the future, to disable the auto intense->bright conversion.~ I just did that now.
* #5682 is related
## PR Checklist
* [x] Closes#10576
* [x] I seriously don't think we have an issue for "disable intense is bright", but I'm not crazy, people wanted that, right? https://github.com/microsoft/terminal/issues/2916#issuecomment-544880423 was the closest
* [x] I work here
* [x] Tests added/passed
* [x] https://github.com/MicrosoftDocs/terminal/pull/381
## Validation Steps Performed
<!--  -->
Yea that works. Printed some bold text, toggled it on, the text was no longer bold. hooray.
### EDIT, 10 Aug
```json
"intenseTextStyle": "none",
"intenseTextStyle": "bold",
"intenseTextStyle": "bright",
"intenseTextStyle": "all",
"intenseTextStyle": ["bold", "bright"],
```
all work now. Repro script:
```sh
printf "\e[1m[bold]\e[m[normal]\e[34m[blue]\e[1m[bold blue]\e[m\n"
```
## Summary of the Pull Request
BODGY!
This solution was suggested in https://github.com/microsoft/microsoft-ui-xaml/issues/4554#issuecomment-887815332.
When the window moves, or when a ScrollViewer scrolls, dismiss any popups that are visible. This happens automagically when an app is a real XAML app, but it doesn't work for XAML Islands.
## References
* upstream at https://github.com/microsoft/microsoft-ui-xaml/issues/4554
## PR Checklist
* [x] Closes#9320
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Unfortunately, we've got a bunch of scroll viewers in our SUI. So I did something bodgyx2 to make our life a little easier.
`DismissAllPopups` can be used to dismiss all popups for a particular UI element. However, we've got a bunch of pages with scroll viewers that may or may not have popups in them. Rather than define the same exact body for all their `ViewChanging` events, the `HasScrollViewer` struct will just do it for you!
Inside the `HasScrollViewer` stuct, we can't get at the `XamlRoot()` that our subclass implements. I mean, _we_ can, but when XAML does it's codegen, _XAML_ won't be able to figure it out.
Fortunately for us, we don't need to! The sender is a UIElement, so we can just get _their_ `XamlRoot()`.
So, you can fix this for any SUI page with just a simple
```diff
- <ScrollViewer>
+ <ScrollViewer ViewChanging="ViewChanging">
```
```diff
- struct AddProfile : AddProfileT<AddProfile>
+ struct AddProfile : public HasScrollViewer<AddProfile>, AddProfileT<AddProfile>
```
## Validation Steps Performed
* the window doesn't close when you move it
* the popups _do_ close when you move the window
* the popups close when you scroll any SUI page
Let's say a user doesn't know that they need to write `"hidden": true` in
order to prevent a profile from showing up (and a settings UI doesn't exist).
Naturally they would open settings.json and try to remove the profile object.
This section of code recognizes if a profile was seen before and marks it as
`"hidden": true` by default and thus ensures the behavior the user expects:
Profiles won't show up again after they've been removed from settings.json.
## References
#8324 - Application State
## PR Checklist
* [x] Closes#8270
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* settings.json/state.json are created if they don't exist ✔️
* Removing any profile from settings.json doesn't cause it to appear again ✔️
* Hitting save in SUI creates profiles with `"hidden": true` ✔️
* Removing a default profile and hitting save in SUI works ❌
An empty object is added instead.
Fixes a bug where interacting with Windows Terminal when using Narrator causes Windows Terminal to hang.
`UiaTextRangeBase::Move()` locks, but later calls `UiaTextRangeBase::ExpandToEnclosingUnit()` which attempts to lock again. The workaround for this is to introduce a `_expandToEnclosingUnit()` that _does not_ lock the console. Then, `Move()` calls this new method, thus only allowing one lock to be established at a time.
This bug is observed to be in v1.11.2221.0 and _not_ in v1.9.1942.0.
A brief summary of the behavior of the tray icon:
- There will only ever be one tray icon representing all windows.
- Left-Click on a Tray Icon brings up the MRU window.
- Right-Click on a Tray Icon brings up a Context Menu:
```
Focus Terminal
----------------
Windows --> Window ID 1 - <unnamed window>
Named Window
Named Window Again
```
- Focus Terminal will bring up the MRU window.
- Clicking on any of the Window "names" in the submenu will summon the window.
## Settings Changes
Two new global settings are introduced: `alwaysShowTrayIcon` and `minimizeToTray`. Here's a chart explaining the behavior with the two settings.
| | `alwaysShowTrayIcon:true` | `alwaysShowTrayIcon:false` |
|----------------------|------------------------------------------------------------------|------------------------------------------------------------------|
| `minimizeToTray:true` | tray icon is always shown. minimize button will hide the window. | tray icon is always shown. minimize button will hide the window. |
| `minimizeToTray:false` | tray icon is always shown. | tray icon is not shown ever. |
Closes#5727
## References
[Spec for Minimize to Tray](https://github.com/microsoft/terminal/blob/main/doc/specs/%23653%20-%20Quake%20Mode/%23653%20-%20Quake%20Mode.md#minimize-to-tray)
Docs PR - MicrosoftDocs/terminal#352
#10448 - My list of TODOs
Improve WriteCharsLegacy performance by increasing LocalBuffer size, allowing
longer runs of characters to be submitted to the remaining parts of conhost.
References #10563 -- vtebench tracking issue
## Validation Steps Performed
* Ran `cat big.txt`, vtebench and termbench and
noted ~5% performance improvements
WriteUTF8FileAtomic overrides the content of the file "atomically"
by creating a temp file and then renaming it to the original path.
The problem arises when the original path is symbolic link,
as the link itself gets overridden by a file (rather than the link target).
This PR introduces a special handling of the symlinks:
if the path as a symlink we resolve the path and use:
1. target's directory to create a temp-file in
2. target itself to be replaced with the tempfile.
Symlink resolution is problematic when the target path does not exist,
as there is no good utility that resolves such link (canonical() fails).
In this corner case we skip the "atomic" approach of renaming the file
and write the link target directly.
Closes#10787
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add functionality to move a pane to another tab. If the tab index is greater than the number of current tabs a new tab will be created with the pane as its root. Similarly, if the last pane on a tab is moved to another tab, the original tab will be closed.
This is largely complete, but I know that I'm messing around with things that I am unfamiliar with, and would like to avoid footguns where possible.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4587
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7075
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Things done:
- Moving a pane to a new tab appears to work. Moving a pane to an existing tab mostly works. Moving a pane back to its original tab appears to work.
- Set up {Attach,Detach}Pane methods to add or remove a pane from a pane. Detach is slightly different than Close in that we want to persist the tree structure and terminal controls.
- Add `Detached` event on a pane that can be subscribed to to remove other event handlers if desired.
- Added simple WalkTree abstraction for one-off recursion use cases that calls a provided function on each pane in order (and optionally terminates early).
- Fixed an in-prod bug with closing panes. Specifically, if you have a tree (1; 2 3) and close the 1 pane, then 3 will lose its borders because of these lines clearing the border on both children https://github.com/microsoft/terminal/blob/main/src/cascadia/TerminalApp/Pane.cpp#L1197-L1201 .
To do:
- Right now I have `TerminalTab` as a friend class of `Pane` so I can access some extra properties in my `WalkTree` callbacks, but there is probably a better choice for the abstraction boundary.
Next Steps:
- In a future PR Drag & Drop handlers could be added that utilize the Attach/Detach infrastructure to provide a better UI.
- Similarly once this is working, it should be possible to convert an entire tab into a pane on an existing tab (Tab::DetachRoot on original tab followed by Tab::AttachPane on the target tab).
- Its been 10 years, I just really want to use concepts already.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing by creating pane(s), and moving them between tabs and creating new tabs and destroying tabs by moving the last remaining pane.
The quake mode keybinding is bound to a scancode. This made it
impossible to override it with a vkey-based one like "win+\`".
This commit fixes the issue by making sure that a `KeyChord` always has a vkey,
and leveraging this fact inside ActionMap, which now ignores the scan-code.
## PR Checklist
* [x] Closes#10875
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode and other keybinding still work ✔️
* Repro settings from #10875 work correctly ✔️
## Summary of the Pull Request
This isn't a fix for #10875, but it is logging that help identify the root cause here. The logging may additionally be helpful for some of the other issues we're seeing elsewhere in the repo, namely #10340.
@lhecker is actually working on the fix for #10875, so hopefully this test will help validate.
## References
* Regressed in #10666.
* logging for #8888
## PR Checklist
* [x] Closes nothing
* [x] I work here
* [x] Tests added, and they absolutely fail, but they're localtests, so ¯\\\_(ツ)_/¯
* [n/a] Requires documentation to be updated
## details
While I was here, I noticed that `KeyBindingsTests::KeyChords` has been broken for some time now. So I fixed that too.
My first approach to solve #10875 failed.
This PR contains the most useful change as a separate commit.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* quake mode keybinding works ✔️
* command palette still works ✔️
## Summary of the Pull Request
This was missed in #10051. We need to make sure that the UIA provider can immediately know about the padding in the control, not just after the settings reload.
## PR Checklist
* [x] Closes #9955.e
* [x] Additionally, this just closes#9955. The only remaining box in there never repro'd, so probably wasn't even root caused by #9820. I think we can close that issue for now, and reactivate if something else was broken.
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Checked before/after in Accessibility Insights. Before the row rectangles were the full width of the control initially. Now they're properly padded.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR implements/solves #7125. Concretely: two requests regarding alt+space were posted there:
1. Disabling the alt+space menu when the keychord explicitly unbound - and forwarding the keystroke to the terminal
2. Disabling the alt+space menu when the keychord is bound to an action
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Not that I know
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7125
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated. N/A
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
The issue was marked Help-Wanted. I am happy to change the implementation to better fit your (planned) architecture.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
While researching the solution, I noticed that the XAML system was always opening the system menu after Alt+Space, even when explicitly setting the event to be handled according to the documentation. The only solution I could find was to hook into the "XAML bypass" already in place for F7 KeyDown, and Alt KeyUp keystrokes. This bypass sends the keystroke to the AppHost immediately. This bypass method will "fall back" to the normal XAML routing when the keystroke is not handled.
The implemented behaviour is as follows:
- Default: same as normal; system menu is working since the bypass does not handle the keystroke
- Alt+Space explicitly unbound: bypass passes the keystroke to the terminal and marks it as handled
- Alt+Space bound to command: bypass invokes the command and marks it as handled
Concretely, added a method to the KeyBindings and ActionMap interfaces to check whether a keychord is explicitly unbound. The implementation for `_GetActionByKeyChordInternal` already distinguishes between explicitly unbound and lack of binding, however this distinction is not carried over to the public methods. I decided not to change this existing method, to avoid breaking other stuff and to make the API more explicit.
Furthermore, there were some checks against Alt+Space further down in the code, preventing this keystroke from being entered in the terminal. Since the check for this keystroke is now done at a "higher" level, I thought I could safely remove these checks as otherwise the keystroke could never be sent to the terminal itself. Please correct me if I'm wrong.
Note that when alt+space is bound to an action that opens the command pallette (such as tab search), then a second press of the key combination does still open the system menu. This is because at that point, the "bypass" is cancelled (called "not a good implementation" in #4031). I don't think this can easily be solved for now, but this is a very minor bug/inconvenience.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Added tests for the new method. Performed manual checking:
* [x] Default configuration still opens system menu like normal
* [x] Binding alt+space to an action performs the action and does not show the system menu
* [x] Explicitly unbinding alt+space no longer shows the system menu and sends the keystroke to the terminal. I was unable to run the debug tap (it crashed my instance - same thing happening on preview and release builds) to check for sure, but behaviour was identical to native linux terminals.
## Summary of the Pull Request
This PR causes the Terminal to combine taskbar states at the tab and window level, according to the [MSDN docs for `SetProgressState`](https://docs.microsoft.com/en-us/windows/win32/api/shobjidl_core/nf-shobjidl_core-itaskbarlist3-setprogressstate#how-the-taskbar-button-chooses-the-progress-indicator-for-a-group).
This allows the Terminal's taskbar icon to continue showing progress information, even if you're in a pane/tab that _doesn't_ have progress state. This is helpful for cases where the user may be running a build in one tab, and working on something else in another.
## References
* [`SetProgressState`](https://docs.microsoft.com/en-us/windows/win32/api/shobjidl_core/nf-shobjidl_core-itaskbarlist3-setprogressstate#how-the-taskbar-button-chooses-the-progress-indicator-for-a-group)
* Progress mega: #6700
## PR Checklist
* [x] Closes#10090
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This also fixes a related bug where transitioning from the "error" or "warning" state directly to the "indeterminate" state would cause the taskbar icon to get stuck in a bad state.
## Validation Steps Performed
<details>
<summary><code>progress.cmd</code></summary>
```cmd
@echo off
setlocal enabledelayedexpansion
set _type=3
if (%1) == () (
set _type=3
) else (
set _type=%1
)
if (%_type%) == (0) (
<NUL set /p =]9;4
echo Cleared progress
)
if (%_type%) == (1) (
<NUL set /p =]9;4;1;25
echo Started progress (normal, 25^)
)
if (%_type%) == (2) (
<NUL set /p =]9;4;2;50
echo Started progress (error, 50^)
)
if (%_type%) == (3) (
@rem start indeterminate progress in the taskbar
@rem this `<NUL set /p =` magic will output the text _without a newline_
<NUL set /p =]9;4;3
echo Started progress (indeterminate, {omitted})
)
if (%_type%) == (4) (
<NUL set /p =]9;4;4;75
echo Started progress (warning, 75^)
)
```
</details>
## Summary of the Pull Request
Apparently the exception handler in TerminalApi is far too talkative. We're apparently throwing in `TerminalApi::CursorLineFeed` way too often, and that's caused an internal bug to be filed on us.
This represents making the event less talkative, but doesn't actually fix the bug. It's just easier to get the OS bug cleared out quick this way.
## References
* MSFT:33310649
## PR Checklist
* [x] Fixes the **A** portion of #10882, which closes MSFT:33310649
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Turns out, we'd only ever use the non-client size to calculate the size of the window, but not the actual position. As we learned in #10676, the nonclient area extends a few pixels past the visible borders of the window.
## PR Checklist
* [x] Closes#10583
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* [x] Works with the `IslandWindow`
* [x] Works with the `NonClientIslandWindow`
## Summary of the Pull Request
Do not invoke terminal resize logic if view port dimensions didn't change
## PR Checklist
* [x] Closes#10857
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Short-circuit `ControlCore::_doResizeUnderLock` if the dimensions of the
required view port are equal to the dimensions of the current view port
#### ⚠️ targets #10051
## Summary of the Pull Request
This updates our `ThrottledFunc`s to take a dispatcher parameter. This means that we can use the `Windows::UI::Core::CoreDispatcher` in the `TermControl`, where there's always a `CoreDispatcher`, and use a `Windows::System::DispatcherQueue` in `ControlCore`/`ControlInteractivity`. When running in-proc, these are always the _same thing_. However, out-of-proc, the core needs a dispatcher queue that's not tied to a UI thread (because the content proces _doesn't have a UI thread!_).
This lets us get rid of the output event, because we don't need to bubble that event out to the `TermControl` to let it throttle that update anymore.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] This is a part of #1256
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Fortunately, `winrt::resume_foreground` works the same on both a `CoreDispatcher` and a `DispatcherQueue`, so this wasn't too hard!
## Validation Steps Performed
This was validated in `dev/migrie/oop/the-whole-thing` (or `dev/migrie/oop/connection-factory`, I forget which), and I made sure that it worked both in-proc and x-proc. Not only that, _it wasn't any slower_!This reverts commit 04b751faa7.
This PR adds conhost support for downloadable soft fonts - also known as
dynamically redefinable character sets (DRCS) - using the `DECDLD`
escape sequence.
These fonts are typically designed to work on a specific terminal model,
and each model tends to have a different character cell size. So in
order to support as many models as possible, the code attempts to detect
the original target size of the font, and then scale the glyphs to fit
our current cell size.
Once a font has been downloaded to the terminal, it can be designated in
the same way you would a standard character set, using an `SCS` escape
sequence. The identification string for the set is defined by the
`DECDLD` sequence. Internally we map the characters in this set to code
points `U+EF20` to `U+EF7F` in the Unicode private use are (PUA).
Then in the renderer, any characters in that range are split off into
separate runs, which get painted with a special font. The font itself is
dynamically generated as an in-memory resource, constructed from the
downloaded character bitmaps which have been scaled to the appropriate
size.
If no soft fonts are in use, then no mapping of the PUA code points will
take place, so this shouldn't interfere with anyone using those code
points for something else, as along as they aren't also trying to use
soft fonts. I also tried to pick a PUA range that hadn't already been
snatched up by Nerd Fonts, but if we do receive reports of a conflict,
it's easy enough to change.
## Validation Steps Performed
I added an adapter test that runs through a bunch of parameter
variations for the `DECDLD` sequence, to make sure we're correctly
detecting the font sizes for most of the known DEC terminal models.
I've also tested manually on a wide range of existing fonts, of varying
dimensions, and from multiple sources, and made sure they all worked
reasonably well.
Closes#9164
`VkKeyScanW` as well as `MapVirtualKeyW` are used throughout
the project, but are input method sensitive functions.
Since #10666 `win+sc(41)` is used as the quake mode keybinding,
which is then mapped to a virtual key in order to call `RegisterHotKey`.
This mapping is highly dependent on the input method and the quake mode
key binding will fail to work once the input method was changed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10729
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* win+` opens quake window before & after changing keyboard layout ✔️
* keyboard layout changes while WT is minimized trigger reloaded ✔️
- Monarch no longer sets itself up as a `CTerminalHandoff` multi instance server by default
- In fact, `CTerminalHandoff` will only ever be a single instance server
- When COM needs a `CTerminalHandoff`, it launches `wt.exe -embedding`, which gets picked up by the Monarch and then gets handed off to itself/peasant depending on user settings.
- Peasant now recognizes the `-embedding` commandline and will start a `CTerminalHandoff` single instance listener, and receives the connection into a new tab.
Closes#10358
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds the Split Tab option to the tab context menu.
Clicking this option will `auto` split the active pane of the tab into a duplicate pane.
Clicking on an unfocused tab and splitting it will bring that tab into focus and split its active pane.
We could make this a flyout from the context menu to let people choose horizontal/vertical split in the future if it's requested.
I'm also wondering if this should be called Split Pane instead of Split Tab?
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#1912
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5025
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
https://user-images.githubusercontent.com/48369326/127691919-aae4683a-212a-4525-a0eb-a61c877461ed.mp4
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
When switching from the alt buffer back to the main buffer, we need to copy certain cursor attributes from the one to the other. However, this copying was taking place after the alt buffer had been freed, and thus could result in the app crashing. This PR simply moves that code up a bit so it's prior to the buffer being freed.
## References
PR #10843 added the code that introduced this problem.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I was able to reproduce the crash when using a debug build, and confirmed that the crash no longer occurred after this PR was applied. I also checked that the cursor attributes were still being correctly copied back when returning from the alt buffer.
Move to 1ES engineering pools
## PR Checklist
* [x] Closes#10734
* [x] I work here
* [x] If the builds still work, the tests pass. (release and PR builds...)
## Validation Steps Performed
- [x] Run the builds associated with this PR
- [x] Force run a release build off this branch
- [x] Force run a PGO training build off this branch
Shortly before adding the SSE2 variant I "improved" it by using
`_mm_packs_epi32`, but failed to test it again afterwards.
## PR Checklist
* [x] Closes#10866
* [x] I work here
## Validation Steps Performed
* `printf "\e[mNORMAL \e[1mBOLD\n"` results in correct bold white glyphs ✔️
## Validation Steps Performed
Clicked around, validated that settings still behave the same (as far as
I can tell with my limited terminal configuration expertise)
Closes#10387
Fixes dragging and dropping drive letters onto the '+' button.
Manually tested - dragging and dropping the `C:\` drive onto the '+' button works when creating a new tab, splitting or creating a new window. Dragging and dropping a regular directory still works.
Closes#10723
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add the ability to toggle a pane's split direction
- Switch from horizontal to vertical split (and vice versa)
- Propogate new borders through to children.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#10665
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10665
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Ran terminal, created multiple panes in different orientations, ran command through command palate and verified that they displayed properly in the new orientation.
When the `SetContoleTitle` API is called with a title containing control
characters, we need to filter out those characters before we can forward
the title change over conpty as an escape sequence. If we don't do that,
the receiving terminal will end up executing the control characters
instead of updating the title. We were already filtering out the C0
control characters, but with this PR we're now filtering out C1 controls
characters as well.
I've simply updated the sanitizing routine in `DoSrvSetConsoleTitleW` to
filter our characters in the range `0x80` to `0x9F`. This is in addition
to the C0 range (`0x00` to `0x1F`) that was already excluded.
## Validation Steps Performed
I've added a conpty unit test that calls `DoSrvSetConsoleTitleW` with
titles containing a variety of C0 and C1 controls characters, and which
verifies that those characters are stripped from the title forwarded to
conpty.
I've also confirmed that the test case in issue #10312 is now working
correctly in Windows Terminal.
Closes#10312
The `_invalidMap` size is dependent on both `clientSize` as well
as `glyphCellSize` and must be resized when either changes.
## PR Checklist
* [x] Closes#10855
* [x] I work here
## Validation Steps Performed
* Changing font size with Ctrl+Mousewheel in fullscreen works ✔️
This commit introduces a hack to ConptyConnection for launching WSL.
When we detect that WSL is being launched (either "wsl" or "wsl.exe",
unqialified or _specifically_ from the current OS's System32 directory),
we will promote the startingDirectory specified at launch time into a
commandline argument.
Why do we want to switch to `--cd`?
With the current design of ConptyConnection and WSL, there are some
significant limitations:
* `startingDirectory` cannot be a WSL path, which forces users to
use weird tricks such as setting the starting directory to
`\\wsl$\Distro\home\user`.
* WSL occasionally fails to launch in time to handle a `\\wsl$` path,
which makes us spawn in a strange location (or no location at all).
(This fix will only address the second one until a WSL update is
released that adds support for `--cd $LINUX_PATH`.)
We will not do the promotion if any of the following are true:
* the commandline contains `--cd` already
* the commandline contains a bare `~`
* This was a commonly-used workaround that forced wsl to start in the
user's home directory. It conflicts with --cd.
* wsl is not spelled properly (`WSL` and `WSL.EXE` are unacceptable)
* an absolute path to wsl outside the system32 directory is provided
We chose the do this trick in the connection layer, the latest possible
point, because it captures the most use cases.
We could have done it earlier, but the options were quite limiting.
They are:
* Generate WSL profiles with startingDirectory set to the home folder
* We can't do this because we do not know the user's home folder
path.
* Generate WSL profiles with `--cd` in them.
* This only works for unmodified profiles.
* This only works for generated profiles.
* Users cannot override the commandline without breaking it.
* Users cannot specify a startingDirectory (!) since the one on the
commandline wins.
* Set a flag on generated WSL profiles to request this trick
* This only works for generated profiles. Users who create their own
WSL profiles couldn't set startingDirectory and have it work the
same.
Patching the commandline, hacky though it may be, seemed to be the most
compatible option. Eventually, we can even support `wt -d ~ wsl`!
## Validation Steps Performed
Manual validation for the following cases:
```c++
// MUST MANGLE
auto a01 = _tryMangleStartingDirectoryForWSL(LR"(wsl)", L"SENTINEL");
auto a02 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X)", L"SENTINEL");
auto a03 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X ~/bin/sh)", L"SENTINEL");
auto a04 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe)", L"SENTINEL");
auto a05 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X)", L"SENTINEL");
auto a06 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X ~/bin/sh)", L"SENTINEL");
auto a07 = _tryMangleStartingDirectoryForWSL(LR"("wsl")", L"SENTINEL");
auto a08 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe")", L"SENTINEL");
auto a09 = _tryMangleStartingDirectoryForWSL(LR"("wsl" -d X)", L"SENTINEL");
auto a10 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe" -d X)", L"SENTINEL");
auto a11 = _tryMangleStartingDirectoryForWSL(LR"("C:\Windows\system32\wsl.exe" -d X)", L"SENTINEL");
auto a12 = _tryMangleStartingDirectoryForWSL(LR"("C:\windows\system32\wsl" -d X)", L"SENTINEL");
auto a13 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~/bin)", L"SENTINEL");
// MUST NOT MANGLE
auto a14 = _tryMangleStartingDirectoryForWSL(LR"("C:\wsl.exe" -d X)", L"SENTINEL");
auto a15 = _tryMangleStartingDirectoryForWSL(LR"(C:\wsl.exe)", L"SENTINEL");
auto a16 = _tryMangleStartingDirectoryForWSL(LR"(wsl --cd C:\)", L"SENTINEL");
auto a17 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~)", L"SENTINEL");
auto a18 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~ -d Ubuntu)", L"SENTINEL");
```
We don't have anywhere to put TerminalConnection unit tests :|
Closes#592.
When switching to the alt buffer, the starting cursor position, style,
and visibility is meant to be inherited from the main buffer. Similarly,
when returning to the main buffer, any changes made to those attributes
should be copied back (with the exception of the cursor position, which
is restored to its original state). This PR makes sure we handle that
cursor state correctly.
At some point I'd like to move the cursor state out of the
`SCREEN_INFORMATION` class, which would make this inheritance problem a
non-issue. For now, though, I've just made it copy the state from the
main buffer when creating the alt buffer, and copy it back when
returning to the main buffer.
## Validation Steps Performed
I've added some unit tests to verify the cursor state is inherited
correctly when switching to the alt buffer and back again. I also had to
make a small change to one of the existing alt buffer test that relied
on the initial cursor position being at 0;0, which is no longer the
case.
I've verified that the test case in issue #3545 is now working
correctly. I've also confirmed that this fixes a problem in the
_notcurses_ demo, where the cursor was showing when it should have been
hidden.
Closes#3545
## Summary of the Pull Request
<kbd>win+shift+arrows</kbd> can be used to move windows to adjacent monitors. When that happens, we'll new re-calculate the size of the window for the new monitor.
## References
* megathread: #8888
## PR Checklist
* [x] Closes#10274
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
In `WM_WINDOWPOSCHANGING`, the OS says "hey, I'm about to do {something} to your window. You cool with that?". We handle that message by:
1. checking if the window was _moved_ as a part of this message
2. getting the monitor that the window will be moved onto
3. If that monitor is different than the monitor the window is currently on, then
* calculate how big the quake window should be on that monitor
* tell the OS that's where we'd like to be.
## Validation Steps Performed
* <kbd>win+shift+arrows</kbd> works right now
* normal quake summoning still works right
I was watching a video about vectorized instructions and I wanted to
try out some new things, as I had never written AVX code before.
This commit is the result of this tiny Thursday morning detour into
AVX land. It improves performance of `TextColor::GetColor` by about 3x.
## Validation Steps Performed
* Default colors are still properly shifted +8 ✔️
Sets the tooltip text on the '+' button based on the keyboard modifiers
when dragging and dropping.
## Validation Steps Performed
Manually tested - dragged a directory onto the '+ button and saw that
* The text changed when `shift` was pressed
* The text changed when `alt` was pressed
* The text changed back when `shift` or `alt` were released
Closes#10722
## Summary of the Pull Request
This fixes two bugs related to dragging into the bounds of the `TermControl`. Although the fixes are fairly small, I'm batching them up, because I don't want to stack 2 more PRs on top of #10051.
* #9109
- This is fixed by only starting an autoscroll if the click&drag actually started within the bounds of the control.
* #4603
- Building on the above change, only modify the selection when the drag started in the control.
## References
* srsly go read #10051.
## PR Checklist
* [x] Closes#9109
* [x] Closes#4603
* [x] I work here
* [x] Test added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is kind of annoying that the auto-scrolling is handled by the TermControl, but it uses a timer that's still a WinUI construct.
We only want to start the auto-scrolling behavior when the drag started _inside_ the control. Otherwise, in the tab drag scenario, dragging into the bounds of the TermControl will trick it into thinking it should start a scroll.
## Summary of the Pull Request
When we're restoring from fullscreen, we do a little adjustment to make sure to clamp the window bounds within the bounds of the active monitor. We unfortunately didn't account for the size of the non-client area (the invisible borders around our 1px border). This didn't matter most of the time, but if the window was within ~8px of the side of the monitor (any side), then restoring from fullscreen would actually move it to the wrong place.
As it turns out, the `_quake` window is within ~8px of the edges of the monitor _very often_.
## References
* regressed in #9737
## PR Checklist
* [x] Closes#10199
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
The repro in the bug was fairly straightforward. It doesn't happen anymore.
For inexplicable reasons, the top row of pixels on our tabs, new tab
button, and caption buttons is totally unclickable. The mouse simply
refuses to interact with them. So when we're maximized, on certain
monitor configurations, this results in the top row of pixels not
reacting to clicks at all.
To obey Fitt's Law, we're gonna hackily shift the entire island up one
pixel. That will result in the top row of pixels in the window actually
being the _second_ row of pixels for those buttons, which will make them
clickable. It's perhaps not the right fix, but it works.
After discussion, we think this is a fine fix for this. We don't think
anyone's going to miss the top row of pixels on the TabView. The original
bug is painful enough for the subset of users it impacts that this is an
acceptable trade. Should a better fix be found, we can absolutely do that
instead.
Closes#7422
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Implementation of #6219 with a small tweak, not just passing the keys when no panes are present, but passing on the keys when there is no other pane to move to. This enables another usecase: 2 panes in terminal split vertically; in one of these panes running tmux with two panes that are split horizontally. This allows the user to still navigate between tmux panes even though they have terminal panes open.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Not that I know of
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6219
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated. I don't think that's necessary
* [x] Schema updated. N/A
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Implementation by propagating the boolean indicating success of moving focus all the way to the action handler, where this result will determine whether the action will be considered handled or not. When the action is not handled, the keychord will be propagated to the terminal.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing; all relevant unit tests still work
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes/implements #10058 according to directions in that issue: added support for browser navigation keys to be used in actions.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10058
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated: . If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: https://github.com/MicrosoftDocs/terminal/pull/371
* [x] Schema updated.
* [x] I've discussed this with core contributors already. According to instructions in #10058
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The mouse back/forward keys do not correspond to the keys added here. That would be a nice (but more complicated) addition, I'll add an issue for it.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
The `+=` operator is an extremely hot path under heavily output load. This PR aims to optimize its speed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Supports #10563
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This pull request ports our old release pipeline from Azure DevOps' editor to real YAML.
It includes the following changes on top of a straight-up "export" from Azure:
- Converts all queue-time variables into form-based parameters
- Adds a "matrix" build strategy for Configs * Platforms
- Renames all jobs to have reasonable names
- The YAML generator has a bug where it inlines scripts *and* file paths if a task had both; remove old inlines
- Removes dead rules
- Fixes the WPF build to include the apiset impostor
- Migrates the access token into the environment for the one build stage that needs it
- Cleans up some of the online script logic
- Removes all of the "!is pull request?" checks
- For tabs started from the Terminal, the initial sizing information is
passed into the connection and used to establish the PTY. Those
parameters are given over to the `OpenConsole.exe` acting as PTY to
establish the initial buffer/window size.
- However, for tabs started from outside, the PTY is created with some
default buffer information FIRST as the Terminal hasn't even been
involved yet. As such, when the Terminal gets that connection, it must
tell the PTY to resize just as it connects to match the window size
it's about to use.
- Ongoing resize operations in the Terminal did and still work fine
because they transmitted the updated size with the
`ResizePseudoConsole` API.
## Validation Steps Performed
- [x] Confirmed existing tabs opening have correct initial size in PTY
(like with CMD `mode con` command)
- [x] Confirmed inbound cmd tabs have correct initial size in PTY via
`mode con` command per bug repro
Closes#9811
Turns out, DWrite will automatically turn some features on even if they weren't included in the feature vector passed into it. Remove these features from our default list for easier readability.
This commit fixes the UseDx mode for conhost.
In order to add support for UseDx without calling `SetWindowSize`,
responsibility for resizing `_invalidMap` has been moved to occur
only when the renderer itself recognizes a new size. Furthermore
`InvalidateAll` is now the central point to invalidate `_invalidMap`.
## Validation Steps Performed
* Enabling `UseDx` enables the DxEngine for conhost ✔️
* Resizing windows in conhost works ✔️
* Resizing windows in WT works ✔️Closes#5455
## Summary of the Pull Request
Uses the new logic to find visual neighbors of a pane to find which pane is the target when the move-focus commands are used.
## References
It sounds like this logic will be refined later to meet #4692
## PR Checklist
* [x] Closes#2398
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Created a grid of panes and confirmed that focus movement went to the right quadrant instead of just the first child of the sibling.
Adds support for users to be able to set font features and axes (see the spec for more details!)
## Detailed Description
**CustomTextLayout**
- Asks the `DxFontRenderData` for the font features when getting glyphs
- _If any features have been set/updated, we always skip the "isTextSimple" shortcut_
- Asks the `_formatInUse` for any font axes when mapping characters in `_AnalyzeFontFallback`
**DxFontRenderData**
- Stores a map of font features (initialized to the [standard feature list])
- Stores a map of font axes
- Has methods to add font features/axes to the map or update existing ones
- Has methods to retrieve the font features/axes
- Sets the font axes in the `IDWriteTextFormat` when creating it
## Validation Steps Performed
It works!
[standard feature list]: ac5aef67d1/DrawableObject.ixx (L802)
Specified in #10457
Related to #1790Closes#759Closes#5828
## Summary of the Pull Request
When we perform a `focusTab` action, we currently do nothing if the parameter was greater than the number of tabs. This PR changes that behavior. Now, `focus-tab -t 999999` will always focus the last tab, instead of silently doing nothing.
## PR Checklist
* [x] Closes#9369
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* [x] ran tests
* [x] validated commandline manually
Related work items: MSFT-32957145
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev bdb25dc99dcb2f1ee483dffe883d0178ea9d18dc
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add functionality to swap a pane with an adjacent (Up/Down/Left/Right) neighbor.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
This work potentially touches on: #1000#2398 and #4922
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes a component of #1000 (partially, comment), #4922 (partially, `SwapPanes` function is added but not hooked up, no detach functionality)
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Its been a while since I've written C++ code, and it is my first time working on a Windows application. I hope that I have not made too many mistakes.
Work currently done:
- Add boilerplate/infrastructure for argument parsing, hotkeys, event handling
- Adds the `MovePane` function that finds the focused pane, and then tries to find
a pane that is visually adjacent to according to direction.
- First pass at the `SwapPanes` function that swaps the tree location of two panes
- First working version of helpers `_FindFocusAndNeighbor` and `_FindNeighborFromFocus`
that search the tree for the currently focused pane, and then climbs back up the tree
to try to find a sibling pane that is adjacent to it.
- An `_IsAdjacent' function that tests whether two panes, given their relative offsets, are adjacent to each other according to the direction.
Next steps:
- Once working these functions (`_FindFocusAndNeighbor`, etc) could be utilized to also solve #2398 by updating the `NavigateFocus` function.
- Do we want default hotkeys for the new actions?
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
At this point, compilation and manual testing of functionality (with hotkeys) by creating panes, adding distinguishers to each pane, and then swapping them around to confirm they went to the right location.
Pass inbound handoff message via heap so it cannot race out of scope by the time it reaches the ConsoleIoThread
## PR Checklist
* [x] Closes#10251
* [x] I work here.
* [x] Manually verified somewhat
## Detailed Description of the Pull Request / Additional comments
- `OpenConsole.exe` is started in response to the OS `conhost.exe` request for a handoff and prepares an Out Of Proc Multithreaded COM server.
- A COM thread from the pool inside `OpenConsole.exe` picks up the inbound message and allocates some stack space for the `CONSOLE_API_MSG` coming in
- That COM thread calls down to set up the I/O thread that will pump the console driver handle and passes a pointer to the stack-allocated `CONSOLE_API_MSG` as the `LPVOID` parameter for starting the thread.
Now one of two things happen:
1. The I/O thread is scheduled pretty much immediately (or soon enough that the COM thread hasn't messed with the stack space), picks up the pointer to the COM thread's stack with `CONSOLE_API_MSG`, and processes the initial message correctly.
2. The COM thread continues and finalizes the handoff message to `conhost.exe` declaring success. It then pops stack and "frees" the memory space. If it doesn't manage to overwrite it, we're still good. If it does, then things go crazy.
This fix changes it so that the `CONSOLE_API_MSG` is sent into the heap before being passed to the other thread so it's in a known location that won't be freed or overwritten unexpectedly.
## Validation Steps Performed
- [x] - Confirmed that many handoffs from the run box seem to work alright on my system after this change.
- [x] - Confirmed that many tab creations/splits seem to work alright on my system after this change.
- [x] - Would prefer if @ianjoneill could try to F5 this branch to build/deploy it, set it as default, and see if it makes it go away completely... but I'm pretty confident it is this based on the dumps provided either way.
## Summary of the Pull Request
We no longer automatically write the 'hidden' field for profile stubs we create
**Note**: This does not retroactively remove the automatically generated hidden fields in current settings files
## PR Checklist
* [x] Closes#10539
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Deleted the ubuntu stub in my settings file, booted up terminal, new created stub did not have the hidden field. Created a fragment that overrides the hidden field and it worked.
As identified by Michael Niksa, our MDE heuristics for understanding relationship between conhost and related processes was incorrect. Exposing trace here to assist in correlation.
Related work items: MSFT-32957145
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 3c886da66d77d1aa36b52794929e388af292539c
The `_CONSOLE_API_MSG` buffer is resized to cover an entire message.
Later on any UTF-8 data is cached in a separate temporary
buffer inside `til::u8state` to prevent lone surrogate pairs.
Both cases are problematic as neither buffer is freed after the read
has finished. Passing a 100MB buffer to conhost once will thus cause it
to continue using ~220MB of physical memory until the conhost process exits.
This change releases unneeded memory as soon as the requested buffer
size has halved. In practice this means that once a command has returned
all buffers will shrink, as the shell commonly sends very small messages.
## PR Checklist
* [x] Closes#10731
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Buffers aren't reallocated during printing ✔️
* Buffers shrink after printing finished ✔️
This commit introduces an alternative to specifying key bindings as a combination of key modifiers and a character. It allows you to specify an explicit virtual key as `vk(nnn)`.
Additionally this commit makes it possible to bind actions to scan codes. As scan code 41 appears to be the button below the Escape key on virtually all keyboards, we'll be able to bind the quake mode hotkey to `win+sc(41)` and have it work consistently across most if not all keyboard layouts.
## PR Checklist
* [x] Closes#7539, Closes#10203
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
The following was tested both on US and DE keyboard layouts:
* Ctrl+, opens settings ✔️
* Win+` opens quake mode window ✔️
* Ctrl+plus/minus increase/decrease font size ✔️
## Summary of the Pull Request
Adjust the y-coordinate of the mouse coordinates we send based on how much the viewport has been scrolled
## Validation Steps Performed
Validated: cannot repro the issue in #10190Closes#10190
## Summary of the Pull Request
We were making the quake window exactly the width of the monitor it was on, but that didn't account for the 1px of border on either side.
## References
* megathread: #8888
## PR Checklist
* [x] Closes#10201
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
It happened before, it doesn't anymore.
## Summary of the Pull Request
Add an explicit background color to part of the settings UI to prevent animation overflow. The previous solution (adding a ScrollViewer) caused problems.
## References
#10619 adds a ScrollViewer for one of the issues in #10609
## PR Checklist
* [x] Closes#10664
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
Visually confirmed the animation doesn't overflow, changed the theme and confirmed the colors are responsive. Confirmed the extra scrollbar is gone.
Visual Studio 2022 Preview recently released the v143 toolchain.
C4189 is now flagging several unused variables, which breaks our build.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* CascadiaPackage builds ✔️
* All tests build ✔️
## Summary of the Pull Request
When the quake window is moved to another monitor, re-evaluate it's size for that monitor.
## References
* megathread: #8888
* Similar, but not the same: #10274
## PR Checklist
* [x] Closes#10182
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
We'll probably need to do this in a few more places, but I'm breaking PRs into small chunks for easier reviews.
## Validation Steps Performed
Summoned the window to a bunch of different resolutions. Where it would use the wrong size before, it no longer does.
As discussed in team sync. Is this a mysterious dark pattern we didn't know about?
* [x] closes#10721
* [x] I work here
* [x] doesn't need tests
* [x] doesn't need docs
* see also #10160
#### ⚠️ targets #10051
## Summary of the Pull Request
This PR does one big, primary thing. It removes all the constructors from any TerminalConnections, and changes them to use an `Initialize` method that accepts a `ValueSet` of properties.
Why?
For the upcoming window/content process work, we'll need the content process to be able to initialize the connection _in the content process_. However, the window process will be the one that knows what type of connection to make. Enter `ConnectionInformation`. This class will let us specify the class name of the type we want to create, and a set of settings to use when initializing that connection.
**IMPORTANT**: As a part of this, the constructor for a connection must have 0 arguments. `RoActivateInstance` lets you just conjure a WinRT type just by class name, but that class must have a 0 arg ctor. Hence the need for `Initialize`, to actually pass the settings.
We're using a `ValueSet` here because it's basically a json blob, with more steps. In the future, when extension authors want to have custom connections, we can always deserialize the json into a `ValueSet`, pass it to their connection's `Initialize`, and let then get what they need out of it.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760298
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
`ConnectionInformation` was included as a part of this PR, to demonstrate how this will eventually be used. `ConnectionInformation` is not _currently_ used.
## Validation Steps Performed
It still builds and runs.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR implements the ability to drop directories/files on the '+' button which in turn will open the tab/pane/window in the given starting path.
In order to do this, I refactored the click's lambda into a method and re-used it
Sadly I wasn't able to add note about the alt/shift feature (any ideas how to do this?)
Also most of the code is "look-a-like" from other places within the project, as I don't have much experience in windows development.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
implements #10073
## PR Checklist
* [ ] Closes#10073
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
** tests were done manually both of the old feature (alt/shift+click) on the '+' and on the profiles
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
** no idea what to add there, if any.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
tested manually.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Supports #10563
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
When you use the size parameter to WideCharToMultiByte, it only
null-terminates the output string if the input string was
null-terminated within the specified range.
Burned in for 1k runs-
BEFORE
Summary: Total=1000, Passed=997, Failed=3
AFTER
Summary: Total=1000, Passed=1000, Failed=0
Fixes MSFT-34656993
Fix unbound read of cooked read buffer
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 756c8dcd4cf9551f5bf090b98bf3fba5498f8eff
Related work items: MSFT-32957145
An internal change CommandLineToArgVW to an apiset.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a71b943e06c009085d6a2bb886dd50c2d0d2c276
Related work items: MSFT-32178383
## Summary of the Pull Request
This forces the `TermControl` to only use `ControlCore` and `ControlInteractivity` via their WinRT projections. We want this, because WinRT projections can be used across process boundaries. In the future, `ControlCore` and `ControlInteractivity` are going to be living in a different process entirely from `TermControl`. By enforcing this boundary now, we can make sure that they will work seamlessly in the future.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760270
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Most all this was just converting pure c++ types to winrt types when possible. I've added a couple helper projections with `til` converters, which made most of this really easy.
The "`MouseButtonState` needs to be composed of `Int32`s instead of `bool`s" is MENTAL. I have no idea why this is, but when I had the control OOP in the sample, that would crash when trying to de-marshal the bools. BODGY.
The biggest changes are in the way the UIA stuff is hooked up. The UiaEngine needs to be attached directly to the `Renderer`, and it can't be easily projected, so it needs to live next to the `ControlCore`. But the `TermControlAutomationPeer` needed the `UiaEngine` to help implement some interfaces.
Now, there's a new layer we've introduced. `InteractivityAutomationPeer` does the `ITextProvider`, `IControlAccessibilityInfo` and the `IUiaEventDispatcher` thing. `TermControlAutomationPeer` now has a
`InteractivityAutomationPeer` stashed inside itself, so that it can ask the interactivity layer to do the real work. We still need the `TermControlAutomationPeer` though, to be able to attach to the real UI tree.
## Validation Steps Performed
The terminal behaves basically the same as before.
Most importantly, I whipped out Accessibility Insights, and the Terminal looks the same as before.
## Summary of the Pull Request
Replaces the key chord editor in the actions page with a listener instead of a plain text box.
## References
#6900 - Settings UI Epic
## Detailed Description of the Pull Request / Additional comments
- `Actions` page:
- Replace `Keys` with `CurrentKeys` for consistency with `Action`/`CurrentAction`
- `ProposedKeys` is now a `Control::KeyChord`
- removes key chord validation (now we don't need it)
- removes accept/cancel shortcuts (nowhere we could use it now)
- `KeyChordListener`:
- `Keys`: dependency property that hooks us up to a system to the committed setting value
- this is the key binding view model, which propagates the change to the settings model clone on "accept changes"
- We bind to `PreviewKeyDown` to intercept the key event _before_ some special key bindings are handled (i.e. "select all" in the text box)
- `CoreWindow` is used to get the modifier keys because (1) it's easier than updating on each key press and (2) that approach resulted in a strange bug where the <kbd>Alt</kbd> key-up event was not detected
- `LosingFocus` means that we have completed our operation and want to commit our changes to the key binding view model
- `KeyDown` does most of the magic of updating `Keys`. We filter out any key chords that could be problematic (i.e. <kbd>Shift</kbd>+<kbd>Tab</kbd> and <kbd>Tab</kbd> for keyboard navigation)
## Validation Steps Performed
- Tested a few key chords:
- ✅single key: <kbd>X</kbd>
- ✅key with modifier(s): <kbd>Ctrl</kbd>+<kbd>Alt</kbd>+<kbd>X</kbd>
- ❌plain modifier: <kbd>Ctrl</kbd>
- ✅key that is used by text box: <kbd>Ctrl+A</kbd>
- ✅key that is used by Windows Terminal: <kbd>Alt</kbd>+<kbd>F4</kbd>
- ❌key that is taken by Windows OS: <kbd>Windows</kbd>+<kbd>X</kbd>
- ✅key that is not taken by Windows OS: <kbd>Windows</kbd>+<kbd>Shift</kbd>+<kbd>X</kbd>
- Known issue:
- global key taken by Windows Terminal: (i.e. quake mode keybinding)
- Behavior: global key binding executed
- Expected: key chord recorded
## Demo
## Summary of the Pull Request
Sends the additional xaml notification when the user presses the '+' or delete button for unfocused appearances
## PR Checklist
* [x] Closes#10673
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
It works now
`SRWLOCK`, as used by `std::shared_mutex`, is a inherently unfair mutex
and makes no guarantee whatsoever whether a thread may acquire the lock
in a timely manner. This is problematic for our renderer which relies on
being able to acquire the lock in a timely and predictable manner.
Drawing stalls of up to one minute have been observed in tests.
This issue can be solved with a primitive ticket lock, which is 10x
slower than a `SRWLOCK` but still sufficiently fast for our use case
(10M locks per second per thread). It's likely that any non-trivial lock
duration will diminish the difference to "negligible".
## Validation Steps Performed
* It still blends ✔️
This commit is a preparation for upcoming changes to
KeyChordSerialization for #7539 and #10203. It introduces several
string helpers to simplify key chord parsing and get rid of our implicit
dependency on locale sensitive functions, which are known to behave
erratically.
Additionally key chord serialization used to depend on iteration order
of a hashmap which caused different strings to be returned for the same
key chord. This commit fixes the iteration order and will always return
the same string.
## Validation Steps Performed
* Key bindings are correctly parsed ✔️
* Key bindings are correctly serialized ❔
## Summary of the Pull Request
Adds unfocused appearance creation/configuration in the SUI
There is now an 'Unfocused Appearance' section at the bottom of the 'Appearance' tab in a profile. There is a '+' button to create an unfocused appearance if one does not exist, or a delete button to delete the unfocused appearance if one exists (only one of these buttons is visible at a time).
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
This commit is a preparation for upcoming changes to KeyChordSerialization for #7539 and #10203.
In order to support variadic macros, /Zc:preprocessor was enabled, which required changing unrelated parts of the project.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Project still compiles ✔️
Updates check-spelling to 0.0.19
https://github.com/check-spelling/check-spelling/security/advisories/GHSA-g86g-chm8-7r2p
I'm pinning `actions/checkout` to @v2 instead of micromanaging the
version. We have reasonable faith that GitHub will do a good job of
maintaining their version branch.
I'll probably introduce a version branch for check-spelling in the near
future as well. The job name change is for future bits -- I originally
copied the name from a template and didn't understand its significance
-- eventually it'll actually be used by the workflow. And if one uses
`act`, having distinct / well named jobs is actually useful.
When navigating the settings (or saving/discarding) the animation of the main content overflows the bar with the save and discard buttons. If the main content is encapsulated in a ScrollView the issue goes away.
Fixes one of the issues in #10609
## Validation Steps Performed
Clicked around a whole bunch and have not seen the overflow happen again. Verified that on tabs where scroll is necessary it can still be scrolled, and reflow of elements still functions.
Replaces `KeyModifiers` with the pretty much equivalent
`VirtualKeyModifiers` enum in winrt.
After doing this I noticed #10593 which changes the KeyChords a lot, but
it seems these PRs are still compatible
The issue also mentions replacing Vkey with
`Windows::System::VirtualKey`, but I chose not to because that enum only
includes a subset of the keys terminal supports here (no VK_OEM_* keys)
## Validation Steps Performed
Changed key bind in config, and confirmed it still works after
restarting terminal
Closes#877
After the introduction of scratch.sln, the nuget restore in razzle.cmd fails. This fixes it by specifying the sln file to use.
## PR Checklist
* [x] Closes#10605
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
## Validation Steps Performed
Ran razzle
## Summary of the Pull Request
RIS resets mouse mode and encoding
## PR Checklist
* [x] Closes#8613
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
## Summary of the Pull Request
When discarding or saving settings, the current navigation should be retained.
## References
Issue introduced by #10390
## PR Checklist
* [x] Closes#10617
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
`menuItemsSTL` is filled with all _non_ profile navItems, then `menuItemsSTL` fills `menuItems`, then the profile navItems are added to `menuItems`. So to include the profile nav items in the iteration, `menuItems` needs to be used
## Validation Steps Performed
Spam discard and save buttons
## Summary of the Pull Request
This implements `GetAttributeValue` and `FindAttribute` for `UiaTextRangeBase` (the shared `ITextRangeProvider` for Conhost and Windows Terminal). This also updates `UiaTracing` to collect more useful information on these function calls.
## References
#7000 - Epic
[Text Attribute Identifiers](https://docs.microsoft.com/en-us/windows/win32/winauto/uiauto-textattribute-ids)
[ITextRangeProvider::GetAttributeValue](https://docs.microsoft.com/en-us/windows/win32/api/uiautomationcore/nf-uiautomationcore-itextrangeprovider-getattributevalue)
[ITextRangeProvider::FindAttribute](https://docs.microsoft.com/en-us/windows/win32/api/uiautomationcore/nf-uiautomationcore-itextrangeprovider-findattribute)
## PR Checklist
* [X] Closes#2161
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
- `TextBuffer`:
- Exposes a new `TextBufferCellIterator` that takes in an end position. This simplifies the logic drastically as we can now use this iterator to navigate through the text buffer. The iterator can also expose the position in the buffer.
- `UiaTextRangeBase`:
- Shared logic & helper functions:
- Most of the text attributes are stored as `TextAttribute`s in the text buffer. To extract them, we generate an attribute verification function via `_getAttrVerificationFn()`, then use that to verify if a given cell has the desired attribute.
- A few attributes are special (i.e. font name, font size, and "is read only"), in that they are (1) acquired differently and (2) consistent across the entire text buffer. These are handled separate from the attribute verification function.
- `GetAttributeValue`: Retrieve the attribute verification of the first cell in the range. Then, verify that the entire range has that attribute by iterating through the text range. If a cell does not have that attribute, return the "reserved mixed attribute value".
- `FindAttribute`: Iterate through the text range and leverage the attribute verification function to find the first contiguous range with that attribute. Then, make the end exclusive and output a `UiaTextRangeBase`. This function must be able to perform a search backwards, so we abstract the "start" and "end" into `resultFirstAnchor` and `resultSecondAnchor`, then perform post processing to output a valid `UiaTextRangeBase`.
- `UiaTracing`:
- `GetAttributeValue`: Log uia text range, desired attribute, resulting attribute metadata, and the type of the result.
- `FindAttribute`: Log uia text range, desired attribute and attribute metadata, if we were searching backwards, the type of the result, and the resulting text range.
- `AttributeType` is a nice way to understand/record if the result was either of the reserved UIA values, a normal result, or an error.
- `UiaTextRangeTests`:
- `GetAttributeValue`:
- verify that we know which attributes we support
- test each of the known text attributes (expecting 100% code coverage for `_getAttrVerificationFn()`)
- `FindAttribute`:
- test each of the known _special_ text attributes
- test `IsItalic`. NOTE: I'm explicitly only testing one of the standard text attributes because the logic is largely the same between all of them and they leverage `_getAttrVerificationFn()`.
## Validation Steps Performed
- @codeofdusk has been testing this Conhost build
- Tests added for Conhost and shared implementation
- Windows Terminal changes were manually verified using accessibility insights and NVDA
This pull request brings back the "Base Layer" page, now renamed to
"Defaults", and the "Reset to inherited value" buttons. The scope of
inheritance for which buttons will display has been widened.
The button will be visible in the following cases:
The user has set a setting for the current profile, and it overrides...
1. ... something in profiles.defaults.
2. ... something in a Fragment Extension profile.
3. ... something from a Dynamic Profile Generator.
4. ... something from the compiled-in defaults.
Compared to the original implementation of reset arrows, cases (1), (3)
and (4) are new. Rationale:
(1) The user can see a setting on the Defaults page, and they need a way
to reset back to it.
(3) Dynamic profiles are not meaningfully different from fragments, and
users may need a way to reset back to the default value generated
for WSL or PowerShell.
(4) The user can see a setting on the Defaults page, **BUT** they are
not the one who created it. They *still* need a way to get back to
it.
To support this, I've introduced another origin tag, "User", and renamed
"Custom" to "None". Due to the way origin/override detection works¹, we
cannot otherwise disambiguate between settings that came from the user
and settings that came from the compiled-in defaults.
Changes were required in TerminalSettings such that we could construct a
settings object with a profile that does not have a GUID. In making this
change, I fixed a bit of silliness where we took a profile, extracted
its guid, and used that guid to look up the same profile object. Oops.
I also fixed the PropertyChanged notifier to include the
XxxOverrideSource property.
The presence of the page and the reset arrows is restricted to
Preview- or Dev-branded builds. Stable builds will retain their current
behavior.
¹ `XxxOverrideSource` returns the profile *above* the current profile
that holds a value for setting `Xxx`. When the value is the
compiled-in value, `XxxOverrideSource` will be `null`. Since it's
supposed to be the profile above the current profile, it will also be
`null` if the profile contains a setting at this layer.
In short, `null` means "user specified" *or* "compiled in". Oops.
Fixes#10430
Validation
----------
* [x] Tested Release build to make sure it's mostly arrow-free (apart from fragments)
Implements an `Appearances` xaml object and an `AppearanceViewModel` in the SettingsEditor project. Updates `Profiles` to use these new objects for its default appearance.
This is the first step towards getting `UnfocusedAppearance` into the SUI.
Adds try-catch blocks to the parts where we layer a fragment onto a profile and create a new profile from a fragment. This allows us to continue looping over the remaining fragments after failing to use a badly-formed one, instead of aborting prematurely.
## PR Checklist
* [x] Closes#10590
## Validation Steps Performed
Non-badly formed fragments get loaded even if there is a badly formed one somewhere
Sets the working directory of the terminal when invoked from the shell extension. This ensures that new tabs opened with a starting directory of `.` open in the directory that the terminal was invoked from.
Closes#8933
## Validation Steps Performed
Manually tested - default PowerShell profile set to use home directory, Windows PowerShell profile set to use current directory. Launched via the shell extension and the default profile opened in the explorer directory, as did a new Windows PowerShell tab.
Change accessibility notifier creation so we do not create one when we're in PTY mode. (Guard all call sites to skip math/event work when the notifier is null.) MSAA events are legacy events that are registered for globally and used by some screen readers to find content in the conhost window. The PTY mode is not responsible for hosting the display content or input window, so it makes sense for it to not broadcast these events and delegate the accessibility requirement to the connected terminal.
## References
- #10537
## PR Checklist
* [x] Closes#10568
* [x] I work here
* [x] Manual test launches passed.
Currently, when the user changes the console codepage (manually or via a script) the GDI engine tries to find and set the "best possible" font. The "best possible" here is charset-wise, it doesn't mean that the font is actually better or more eye-candy for the user.
Example:
- Open cmd
- Set the font to Consolas
- Enter `chcp 932`
- Suddenly, a wild MS Gothic appears!
This kind of makes sense (*"if I'm changing the codepage I probably want to see the national characters"*) but it doesn't happen anywhere else - all other apps just substitute the missing glyphs.
After #10472 / #10478 this magic should finally work here as well. So, do we still need to change the whole font? Terminal doesn't do that after all.
## Validation Steps Performed
Download [932.cmd.txt](https://github.com/microsoft/terminal/files/6697577/932.cmd.txt),
rename to 932.cmd, run it, check if the output is still readable.
Closes#10497
## Summary of the Pull Request
Adds a feature flag `Feature_EditableActionsPage` that controls whether the Actions page in the Settings UI is read-only vs editable. The editable version is disabled for `Release` builds and enabled everywhere else (i.e. Dev, Preview, etc...).
Validated using `<stage>` `AlwaysEnabled` and `AlwaysDisabled`.
## References
#6900 - Actions Page Epic
## PR Checklist
Closes#10578
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Implementation of #10477 - handle surrogate pairs in GDI renderer.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#10477
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #10477
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
### Why not let Windows draw surrogate pairs? It can do that.
Basically, the comment says everything:
c90de69250/src/renderer/gdi/paint.cpp (L346-L347)
However, handling things above U+FFFF doesn't really require extra effort. It's enough to:
- Put *all* characters to the output buffer
- Set the first width to cluster width and the rest to 0
- Sit back and relax while Windows does the rest
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
```CMD
@echo off
chcp 65001
echo 𠜎𠝹𠱓𠱸𠲖𠳏𠳕𠴕𠵼𠵿𠸎
echo 👨👩👧👦
```
Save this as a UTF-8 cmd file and run.
### Before the change
### After the change
An example of a third party app working with surrogate pairs in a patched OpenConsole:
As discussed, this change doesn't claim to be the full support for surrogate pairs (there are still corner cases possible), but brings it on par with Terminal with minimal effort.
This PR is a small start in a broader "Minimize to Tray" feature (#5727).
This particular change is scoped only to the scenario when a quake window
is minimized. Currently the only way to bring back the quake window
when it's minimized is to press the global hotkey again. This gives another
option - to press the terminal icon in the tray.
Eventually though, minimize to tray will be available for any window, and
I'd like more time to flesh out the general porpoise scenarios and context
menus. Having just a bit in this PR also helps reviewers by keeping it small!
Delay load call SetThreadDescription to restore WPF renderer on Win7
## PR Checklist
* [x] Closes something @DHowett asked me to do.
* [x] I work here
* [x] I F5'd it on a version with this function and it still works
## Detailed Description of the Pull Request / Additional comments
I keep forgetting that anything in the WPF control needs to keep working on Win7. Or more specifically... I remember this fact for the DX renderer, but not for the render thread base. Oops. Turns out this particular convenience method to set thread descriptions for visibility inside the debugger (to make my life easier) only works down to 1607 (see https://docs.microsoft.com/windows/win32/api/processthreadsapi/nf-processthreadsapi-setthreaddescription). Since it's just a debugging convenience... skipping it entirely when the procedure is not found should be fine. Also I don't try to load `kernel32.dll` and just get the handle of the existing module (which per the remarks at https://docs.microsoft.com/windows/win32/api/libloaderapi/nf-libloaderapi-getmodulehandlew will not increment the module reference count) because `kernel32.dll` pretty much has to be there or we're already in hot water.
## Summary of the Pull Request
This adds the "add new" button to the actions page. It build on the work of #10220 by basically just adding a new list item to the top of the key binding list.
This also makes it so that if you click the "accept changes" button when you have an invalid key chord, we don't do anything.
## References
#6900 - Actions page Epic
#9427 - Actions page design doc
#10220 - Actions page PR - set action
## Detailed Description of the Pull Request / Additional comments
- `ModifyKeyBindingEventArgs` is used to introduce new key bindings. We just ignore `OldKeys` and `OldActionName` because both didn't exist before.
- `IsNewlyAdded` tracks if this is an action that was added, but has not been confirmed to add to the settings model.
- `CancelChanges()` is directly bound to the cancel button. This allows us to delete the key binding when it's clicked on a "newly added" action.
## Validation Steps Performed
- Cancel:
- Deletes the action (because it doesn't truly exist until you confirm changes)
- Accept:
- Adds the new action.
- If you attempt to edit it, the delete button is back.
- Add Action:
- Delete button should not be visible (redundant with 'Cancel')
- Action should be initialized to a value
- Key chord should be empty
- Cannot add another action if a newly added action exists
- Keyboard interaction:
- escape --> cancel
- enter --> accept
- Accessibility:
- "add new" button has a name
- Interaction with other key bindings:
- editing another action --> delete the "newly added" action (it hasn't been added yet)
- only one action can be edited at a time
This commit adds support for bold text in DxRenderer.
For now, bold fonts are always rendered using DWRITE_FONT_WEIGHT_BOLD
regardless of the base weight.
As yet, this behavior is unconfigurable.
References
Previous refactoring PRs: #9096 (DxFontRenderData) #9201 (DxFontInfo)
SGR support tracking issue: #6879Closes#109
The code in this file was adapted from the STL on the 2021-07-05.
It backports the following Windows 8 functions to Windows 7:
* WaitOnAddress
* WakeByAddressSingle
* WakeByAddressAll
These functions are used within `til`. This commit will allow `til` to be used in the conhost source code.
Validation
* [x] correct .dll loads on Windows 7
* [x] correct .dll loads on Windows 10
* [x] link line for PublicTerminalCore prefers this fake apiset over kernel32
Previously `TermControl::Close` destroyed all `ThrottledFunc`s to ensure they're not scheduling any callbacks on the UI thread, as the call to `Close` signals the point at which the `TermControl` isn't part of the UI thread anymore. `_CursorPositionChanged` tried to prevent access to the potentially deallocated `_tsfTryRedrawCanvas` by checking the `std::shared_ptr` for nullability, but since the deallocation happens on the UI thread and the nullability check on a background thread, this check introduced a race condition.
This commit solves the issue by not deallocating any `ThrottledFunc`s anymore and instead checking the `_closing` flag inside the `ThrottledFunc` callback on the UI thread.
Additionally this commit cleans up some antipatterns around the use of `std::optional`.
## PR Checklist
* [x] Closes#10479
* [x] Closes#10302
## Validation Steps Performed
* Opening and closing tabs doesn't crash ✔️
* Printing long text doesn't crash ✔️
* Manual scrolling doesn't crash ✔️
* ^G / the audible bell doesn't crash ✔️
## Summary of the Pull Request
#7960 was caused by `UiaTextRangeBase::_blockRange` not being initialized, thus pointing to random memory. In most cases, we initialize it properly in `RuntimeClassInitialize`, however, the copying version of `RuntimeClassInitialize` doesn't actually copy it over, resulting in it still containing random memory.
NVDA (and other screen readers) occasionally use `Clone` (really just the copy initializer), resulting in this bug occurring randomly.
## PR Checklist
* [X] Closes#7960
* [X] Tests added/passed
## Validation Steps Performed
Test failed before the change, but passes after the change.
This introduces the ability to set the action for a key binding. A combo box is used to let the user select a new action.
## References
#6900 - Actions page Epic
#9427 - Actions page design doc
#9949 - Actions page PR
## Detailed Description of the Pull Request / Additional comments
### Settings Model Changes
- `ActionAndArgs`
- new ctor that just takes a `ShortcutAction`
- `ActionMap`
- `AvailableActions` provides a map of all the "acceptable" actions to choose from. This is a merged list of (1) all `{ "command": X }` style actions and (2) any actions with args that are already defined in the ActionMap (or any parents).
- `RegisterKeyBinding` introduces a new unnamed key binding to the action map.
### Editor Changes
- XAML
- Pretty straightforward, when in edit mode, we replace the text block with a combo box. This combo box just presents the actions you can choose from.
- `RebindKeysEventArgs` --> `ModifyKeyBindingEventArgs`
- `AvailableActionAndArgs`
- stores the list of actions to choose from in the combo box
- _Unfortunately_, `KeyBindingViewModel` needs this so that we can populate the combo box
- `Actions` stores and maintains this though. We populate this from the settings model on navigation.
- `ProposedAction` vs `CurrentAction`
- similar to `ProposedKeys` and `Keys`, we need a way to distinguish the value from the settings model and the value of the control (i.e. combo box).
- `CurrentAction` --> settings model
- `ProposedAction` --> combo box selected item
## Validation Steps Performed
- Cancel:
- ✔️ change action --> cancel button --> begin editing action again --> original action is selected
- Accept:
- ✔️ don't change anything
- ✔️ change action --> OK! --> Save!
- NOTE: The original action is still left as a stub `{ "command": "closePane" }`. This is intentional because we want to prevent all modifications to the command palette.
- ✔️ change action & change key chord --> OK! --> Save!
- ✔️ change action & change key chord (conflicting key chord) --> OK! --> click ok on flyout --> Save!
- NOTE: original action is left as a stub; original key chord explicitly unbound; new command/keys combo added.
Introduces `FontConfig`, an object that isolates font-related settings
in our profiles
Users can now define font settings in their json as so:
```
"font":{
"face": "Consolas",
"size": 12
}
```
Backwards compatible with the currently expected way of defining font
settings in the json, note however that upon hitting 'Save' in the SUI,
these settings **will be rewritten to the font-object style in the json
(as above)**.
## Validation Steps Performed
Existing functionality works, new functionality works
References #1790Closes#6049
This commit adds a "(requires relaunch)" suffix to the header of the language picker control.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
Passing structures larger than the register size is very expensive
due to Microsoft's x64 calling convention. We could reduce the
overhead by passing the string-view by reference, but this forces us
to allocate the parameters as static string-views on the data
segment of our binary. I've found that passing them as classic
C-strings is more ergonomic instead and fits the need for
high performance in this particular code.
This improves performance for VT-heavy output by 15-20%.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
This commit introduces a basic ApplicationState class, without being used for anything yet to aid reviewers. At a later point actual usages of this new class may be added separately.
## References
This commit is an initial step towards implementing #8324.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Creating a `state.json` with `{"generatedProfiles":["{53e75ed9-2b63-4118-856d-0510c4f6b97e}"]}` updates the ApplicationState, as observed through a debugger ✔️
* Deleting the "generatedProfiles" field sets the corresponding field back to nullopt ✔️
Try to throttle the cursor redrawing in the conhost world.
The motivation of this is the high CPU usage of `TriggerRedrawCursor` (#10393).
This can be seen as the conhost version of #2960.
This saves 5%~8% of the CPU time.
Supports #10462.
## Summary of the Pull Request
Updates the `closeTab` action to optionally take an index.
## PR Checklist
* [x] Closes#7180
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: MicrosoftDocs/terminal#347
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Added the following configuration to `settings.json` and validated both key combinations behaved as expected. Also opened the command palette and ensured that the actions were displayed.
```json
{ "command": "closeTab", "keys": "ctrl+shift+delete" },
{ "command": { "action": "closeTab", "index": 0 }, "keys": "ctrl+shift+end" }
```
Noticed the json schema was listing the option as invalid even though it's accepted by WT. So added it to schema to remove the error.
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
## Validation Steps Performed
No longer shows as invalid in VSCode.
This commit introduce three new `til` features:
* "til/latch.h": A std::latch clone, until we're on C++20.
* "til/mutex.h": A safe mutex wrapper, which only allows you access to the protected data after locking it. No more forgetting to lock mutexes!
* "til/throttled_func.h": Function invocation throttling used to be available as the `ThrottledFunc` class already. But this class is vastly more efficient and doesn't rely on any WinRT types.
This PR also adds a `til::ends_with` string helper which is `til::starts_with` counterpart.
## Validation Steps Performed
* Scrollbar throttling still works as it used to ✔️
* No performance regressions when printing big.txt ✔️Closes#10393
This PR Introduces `DxFontInfo` to simplify the logic in
`DxFontRenderData`.
`DxFontInfo` aims to be the DWrite equivalent of `FontInfo` &
`FontInfoBase` in GDI. It encapsulates the needed information to
represent a displayable font face. It also provides the ability to
resolve a font face based on the available fonts on the system.
## References
This is a follow-up of #9096.
Initial Italic support was introduced by #8580.
The motivation behind this is to support bold & bold-italic text in
Windows Terminal.
Fix startup race of resizing ConPTY
- Depending on what the timing and ordering is of the message coming in
from the signal thread, it may be applied to the startup structure
after the I/O thread has begun initializing the console buffer
structures but before it has signaled that it is done and the signal
thread is ready to make changes directly. This likely happens because
the end of the I/O thread setup has a weird unlock/lock jog for the
input thread and the signal thread might have been scheduled in the
middle of it.
- My resolution here is to ensure that the signal thread just keeps
storing the latest resize message until it is told that everything is
initialized. Whomever comes in to tell the signal thread this
information (under lock) will pickup and run the resize if one came in
before everything was ready. This should resolve the race.
## Validation Steps Performed
- o-sdn-o confirms this resolves their issue
Closes#10400
Replace PolyTextOutW with ExtTextOutW to allow substitution of missing
glyphs from other fonts.
Why not let Windows substitute the glyphs that are missing in the
current font? Currently the GDI renderer of conhost/OpenConsole uses
`PolyTextOutW` for drawing. `PolyTextOutW` doesn't try to substitute
any missing glyphs, so the only way to see, say, Hiragana is to change
the _whole font_ to something like MS Gothic (which is eye-bleeding, to
be honest).
A trivial replace `PolyTextOutW` -> `ExtTextOutW` does the trick.
Switch to `PolyTextOutW` happened in Windows 7 along with introduction
of conhost.exe. Substitution worked in previous Windows versions, where
internal NT interfaces were used.
# Before the change:
# After the change:
Closes#10472
The CursorStyle enum is declared as being of type `uint` on the C# side,
but as `size_t` on the C++ side. There's a C# size_t impostor we could
use, System.UIntPtr, but I don't want to risk changing the public API of
TerminalTheme and I don't know if it can be used as a base type for an
enum.
Anyway, since we don't have more than four billion cursor types I chose
to narrow the field to a uint32_t and unpack it in TerminalSetTheme.
Fixes#10485
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 40df712b33a40e76aeeac87f823bbb028d2e3972
Related work items: MSFT-32007459
Fixes the `Invoke-CodeFormat` and `Invoke-OpenConsoleTests` functions in `OpenConsole.psm1` so that they can be run directly from PowerShell.
Addresses the issues found when creating #10447.
`Invoke-CodeFormat` did not work when invoked directly from PowerShell due to a relative path being passed into the .NET function `[IO.File]::WriteAllLines()`. The working directory for .NET objects does not change when you change directory in PowerShell, so the paths were being treated as relative to the initial working directory of the shell - which was not the terminal git repo.
`Invoke-OpenConsoleTests` had 3 issues:
1. The path to `TestHostApp` was wrong.
2. It would attempt to run the "in host app" tests both in the host app and not in the host app.
3. The test configuration in `tests.xml` wasn't in sync with the `runABC.cmd` files, so the remoting and control unit tests didn't run.
## Validation Steps Performed
1. Ran `Invoke-CodeFormat` and `runformat.cmd` from multiple directories and didn't see errors.
2. Ran `Invoke-OpenConsoleTests` and didn't see errors.
This update brings some significant changes to the Cascadia family:
* Arabic and Hebrew support
* Italics (the new ones, not the cursive ones)
* Tweaked letterforms and fixed interpolation values for the upright
faces.
Since we now have four font files, this commit also relocates them to a
much more reasonable place (res/fonts/) and tidies up the build and
exclude rules to make them more extensible in the future.
This commit introduces localization for the "Open in Windows Terminal"
menu item and differentiates it based on compile-time branding (rather
than runtime detection!).
@leonMSFT's tray icon pull request had the excellent idea to use the
TerminalApp's resource compartment for auxiliary resources for projects
that can't otherwise be localized the same way. Doing localization in
the shell extension (or WindowsTerminal.exe) would require us to use
MUIRCT and split the build process up to support mui files. That's a
huge amount of work... but this is *not* a huge amount of work.
Fixes#6112
## Summary of the Pull Request
#10297 found a bug in `ActionMap` where the `ToggleCommandPalette` key chord could not be found using `GetKeyBindingForAction`.
This was caused by the following:
- `AddAction`: when adding the action, the `ActionAndArgs` is basically added as `{ToggleCommandPalette, ToggleCommandLineArgs{}}` (Note the default ctor used for the action args)
- `GetKeyBindingForAction`: we're searching for an `ActionAndArgs` structured as `{ToggleCommandPalette, nullptr}`
- Since these are _technically_ two different actions, we are unable to find it.
This issue was fixed by making the `Hash(ActionAndArgs)` function smarter! If the `ActionAndArgs` has no args, but the `ShortcutAction` _supports_ args, generate the args using the default ctor.
By making `Hash()` smarter, everybody benefits from this logic! We can basically now enforce that `ActionAndArgs{ <X>, nullptr } == ActionAndArgs{ <X>, <default_ctor> }`.
## Validation Steps Performed
- Added a test.
- Tested this on #10297's branch and this does fix the bug
## Summary of the Pull Request
`ApplicationLanguages::PrimaryLanguageOverride` requires packaged activation.
This PR prevents any such application crashes, by skipping any calls to `PrimaryLanguageOverride`, as well as hiding the language selector in the settings UI.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
## Validation Steps Performed
When WT is run unpackaged:
* Doesn't crash during start ✔️
* SUI doesn't show the language selector ✔️
Persist inbox conhost; delegate control activities to it via a pipe
## PR Checklist
* [x] Closes#10194 - WSL Debug Tap doesn't work
* [x] Closes#10134 - WSL Parameter is Incorrect
* [x] Closes#10413 - Ctrl+C not passed to client
* [x] Closes#10414 - Leftover processes on abrupt termination
* [x] Might help #10251 - Win+X Powershell sometimes fails to attach
* [x] I work here
* [x] Manually tested with assorted launch scenarios
## Detailed Description of the Pull Request / Additional comments
It turns out that there's a bit of ownership that goes on with the original inbox `conhost.exe` and the operating system/driver. The PID of that original `conhost.exe` is stowed when the initial connection is established and it is verified for several activities. This means that the plan of letting it go completely away and having the `OpenConsole.exe` take over all of its activities must be slightly revised.
I have tested the following two alternatives to keeping `conhost.exe` around and they do not work:
1. Replacing the original owner `conhost.exe` with `OpenConsole.exe` - A.) The driver does not allow this. Once the owner is registered, it cannot be replaced. B.) There's no way of updating this information inside the client process space and it is kept there too in the `kernelbase`/`conclnt` data from its initial connection.
2. Attempting to pick up the first packet (to determine headed/headless and other initial connection information that we use to determine whether handoff is appropriate or not) prior to registering any owner at all. - The driver doesn't allow this either. The owner must be registered prior to a packet coming through.
Put this mental model in your head:
CMD --> Conhost (inbox) --> OpenConsole (WT Package) --> Terminal (WT Package)
So since the `conhost.exe` needs to stick around, here's what I'm doing in this PR:
- `conhost.exe` in the OS will receive back the `OpenConsole.exe` process handle on a successful handoff and is expected to remain alive until the `OpenConsole.exe` exits. It's now waiting on that before it terminates itself.
- `conhost.exe` in the OS will establish a signal channel pipe and listen for control commands from `OpenConsole.exe` in a very similar fashion to how the `ConPTY` signal pipe operates between the Terminal and the PTY (provided by `OpenConsole.exe` in this particular example.) When `OpenConsole.exe` needs to do something that would be verified by the OS and rejected... it will instead signal the original `conhost.exe` to do that thing and it will go through.
- `conhost.exe` will give its own handle through to `OpenConsole.exe` so it can monitor its lifetime and cleanup. If the owner is gone, the session should end.
- Assorted handle cleanup that was leading to improper exits. I was confused between `.reset()` and `.release()` for some of the `wil::unique_any<T>` handling and it lead to leaked handles. The leaked handles meant that threads weren't aware of the other sides collapsing and wouldn't cleanup/terminate appropriately.
How does this fix things?
- For the WSL cases... WSL was specifically looking up the owner PID of the console session from the driver. That was the `conhost.exe` PID. If it exits, that PID isn't valid and is recycled. Thus the parameter is incorrect or other inappropriate WSL setup behaviors.
- Ctrl+C not passed... this is a signal the operating system rejects from a PID that is not the owner. This is now relayed through the original owner and it works.
- Leftover processes... I believe I explained this was both not-enough-monitoring of each others' process lifetimes coupled with mishandling of release/resetting handles and leaking them.
- Powershell sometimes fails to attach... my theory on this one is that it's a race that became upset when the `conhost.exe` disappeared while something about Powershell/.NET was still starting, much like the WSL one. I believe now that it is sticking around, it will be fine.
Also, this WILL require an OS update to complete improvement of functionality and I have revised the interface ID. This is considered an acceptable breaking change with no mitigation because we said this feature was an alpha preview.
## Validation Steps Performed
- Launched WSL with defapp set, it works
- Launched WSL with defapp set and the debug tap on, it works and opens in two tabs
- Launched CMD, ran ping, did Ctrl+C, it now receives it
- Launched Win+X powershell a ton of times. It seems fine now
- Launched cmd, powershell, wsl, etc. Killed assorted processes in the chain (client/conhost/openconsole/windowsterminal) and observed in Process Explorer (with a long delta timer so I could see it) that they all successfully tear down now without leftovers.
An exception was introduced for the 'Toggle Command Palette' action to **not** being dispatched. Otherwise the command palette that was just closed will become visible again.
## PR Checklist
* [x] Closes#10240
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
- Selecting the `Toggle command palette` item in the command palette will now properly close the command palette.
- Opening and closing the Command Palette through shortcut keys is still working fine.
- Other command palette items are still working fine as well.
## Summary of the Pull Request
This commit introduces a copy constructor/operator for
`_CONSOLE_API_MSG`. The change is not trivial as the struct contains a
union of unnamed structs that cannot be copied using regular language
features. As such a copy operator using `memcpy` was implemented.
Additionally all access specifiers were removed, as those allow a C++
compiler to reorder struct members. This would break message passing.
This commit is a good opportunity to prevent such miscompilations
proactively.
## Validation Steps Performed
* Command prompts of WSL2 fish-shell and pwsh still work ✔️Closes#10076
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Immediately cancelling the preview when the user is navigating back from a nested command.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10165
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Basically 2 changes are done here:
- Allow the click handler to run for the back button when the button has focus and user hits the enter key (similarly as hitting space now).
- Now immediately cancelling the preview when the user is navigating back. Felt nicer to do it immediately at that point then keeping the preview active until the user hits cancel to close the palette. So the preview is already cancelled at step **5** instead of 6 as mentioned in the reproduction steps here https://github.com/microsoft/terminal/issues/10165#issue-899838383. But of course let me know if you're not agreeing here 😀 .
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
- Open 'Color Scheme' and verified preview is still working fine when selecting different schemes.
- After tabbing back to the Back button verified that when hitting enter or space the preview is cancelled and the original color scheme is being used again.
- Then after going back to 'Color Scheme' previews are still working ok.
- After hitting Enter on one of the Color Schemes the scheme still becomes active as before.
## Summary of the Pull Request
Fixes a bug where the edit button in the actions page would have white text when in light theme. Now, we just fallback to XAML's built-in value (black in light theme and white in dark theme).
## References
#6900 - Epic
Closes#10406
This commit makes the feature staging header build in OS razzle.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev cd1428ce557238663b7a748763ea8ce082b88256
Related work items: MSFT-33722503
## Summary of the Pull Request
This commit fixes various race conditions regarding the settings UI. It's unsafe to write to class members from background threads without acquiring mutexes or yielding to the main thread first.
By changing the settings reload code path to yield to the main thread early, we're able to cut down on code complexity and unsafe member accesses.
## PR Checklist
* [x] Closes#9273
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Settings UI reloads without crashing ✔️
This pull request converts four of our existing `#ifdef` (or `#ifndef`)
`INSIDE_WINDOWS` blocks to til::features:
* Attempting to establish a handoff session (inside Windows only)
* The ability to *receive* a handoff session (outside Windows only)
* The DX engine (outside Windows only) and shaders (also outside only)
* Whether we use numpad event synthesis for clipboard/conpty (inside
Windows only)
Most of these are using the preprocessor verison of til::feature, only
because it is more difficult to gate the inclusion of headers on
constant expressions. I'd love to prefer the compile time version.
## Summary of the Pull Request
This PR adds a global "language" setting, which may be set to any supported BCP 47 tag.
Additionally a ComboBox is added to the settings UI under "Appearance", listing all languages with their localized names.
This PR introduces one new issue: If you change the language while the app is running, the UI will be in a torn state, as not all UI elements refresh automatically if the `PrimaryLanguageOverride` is changed.
## PR Checklist
* [x] Closes#5497
* [x] I work here
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated
## Validation Steps Performed
* UI language changes when changing the "language" in settings.json before starting WT / while WT is running. ✔️
* "language" field is removed from settings.json if "Use system default" is selected. ✔️
* "language" field is added or updated in settings.json if any other language is selected. ✔️
* Removes qps- languages if debugFeatures is false. ✔️
* Correctly refreshes all UI elements with the new language. ❌
This pull request implements a "feature flagging" system that will let
us turn Terminal and conhost features on/off by branch, "release" status
or branding (Dev, Preview, etc.).
It's loosely modelled after the Windows OS concept of "Velocity," but
only insofar as it is driven by an XML document and there's a tool that
emits a header file for you to include.
It only supports toggling features at compile time, and the feature flag
evaluators are intended to be fully constant expressions.
Features are added to `src\features.xml` and marked with a "stage". For
now, the only stages available are `AlwaysDisabled` and `AlwaysEnabled`.
Features can be toggled to different states using branch and branding
tokens, as documented in the included feature flag docs.
For a given feature Feature_XYZ, we will emit two fixtures visible to
the compiler:
1. A preprocessor define `TIL_FEATURE_XYZ_ENABLED` (usable from MIDL,
C++ and C)
2. A feature class type `Feature_XYZ` with a static constexpr member
`IsEnabled()` (usable from C++, designed for `if constexpr()`).
Like Velocity, we rely on the compiler to eliminate dead code caused by
things that compile down to `if constexpr (false)`. :)
Michael suggested that we could use `WindowsInbox` as a branding to
determine when we were being built inside Windows to supplant our use of
the `__INSIDE_WINDOWS` preprocessor token. It was brilliant.
Design Decisions
----------------
* Emitting the header as part of an MSBuild project
* WHY: This allows the MSBuild engine to ensure that the build is
only run once, even in a parallel build situation.
* Only having one feature flag document for the entire project
* WHY: Ease.
* Forcibly including `TilFeatureStaging` with `/FI` for all CL compiler
invocations.
* WHY: If this is a project-wide feature system, we should make it as
easy as possible to use.
* Emitting preprocessor definitions instead of constexpr/consteval
* WHY: Removing entire functions/includes is impossible with `if
constexpr`.
* WHY: MIDL cannot use a `static constexpr bool`, but it can rely on
the C preprocessor to remove text.
* Using MSBuild to emit the text instead of PowerShell
* WHY: This allows us to leverage MSBuild's `WriteOnlyWhenDifferent`
task parameter to avoid changing the file's modification time when
it would have resulted in the same contents. This lets us use the
same FeatureStaging header across multiple builds and multiple
branches and brandings _assuming that they do not result in a
feature flag change_.
* The risk in using a force-include is always that it, for some
reason, determines that the entire project is out of date. We've
gone to great lengths to make sure that it only does so if the
features _actually materially changed_.
## Summary of the Pull Request
Fixes a bug where top-level iterable commands were not serialized.
## PR Checklist
* [X] Closes#10365
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
- `Command::ToJson`:
- iterable commands deserve the same treatment as nested commands
- `ActionMap`:
- Similar to how we store nested commands, iterable commands need to be handled separately from standard commands. Then, when generating the name map, we make sure we export the iterable commands at the same time we export the nested commands.
Add missing keys to the schema:
- globalSummon (and args: desktop, monitor, name, dropdownDuration, toggleVisibility)
- quakeMode
- iterateOn
- commands
Also enforces required keys for commands and deprecates "keybindings"
## PR Checklist
* [x] Closes#7443
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
## Detailed Description of the Pull Request / Additional comments
There were some other pending keys mentioned on the issue, but I don't think they are pending anymore.
## Validation Steps Performed
Changed the `"$schema"` value in my settings.json to point to the edited one.
#### ⚠️ This targets #10051
## Summary of the Pull Request
This PR creates a `Samples` solution which can be used for quickly testing our particular WinUI + Xaml Islands + wapproj setup, with a `TermControl`. This lets us quickly prototype and minimally repro xaml islands bugs, but also lets us iterate quickly on changes in the process model. I'll be using this in the future to prove that the out-of-proc control works (for tear-out), without having to tear up the entire `TerminalApp` all at once.
While I'll be leaning on this extensively for tear-out prototyping, I've also found myself wanting this kind of sample sln many times in the past. We run into bugs all the time where we're not sure if they're XAML Islands bugs or Terminal bugs. However, standing up a scratch sln with MUX hooked up, and a `XamlApplication` from the toolkit, and XAML Islands is time consuming. This sample sln should let us validate if bugs are XI bugs or Terminal bugs much easier.
## References
* Tear-out: #1256
* Megathread: #5000
* Project: https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes one bullet point of https://github.com/microsoft/terminal/projects/5#card-50760312
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is _largely_ a copy-pasta of our existing projects, in massively simplified form. I'm gonna wontfix most comments on the code that was copy-pasta'd. If it's bad here, it's probably also bad in the real version in `OpenConsole.sln`.
* I made an entirely new `.sln` for this, so that these samples wouldn't need to build in CI. They're not critical code, they're literally just for prototyping.
* `TerminalAppLib` & `TerminalApp` became `SampleAppLib` and `SampleApp`. This is just a simple application hosting a single `TermControl`. It references the winmds and dlls from the main `OpenConsole.sln`, but in a way that would be more like a project consuming a nuget feed of the control, rather than a `ProjectReference`.
- It still does all the `App.xaml` and `Toolkit.XamlApplication` stuff that TerminalApp does, so that it can load MUX resources, and do MUX-y things.
* `WindowsTerminal` became `WindowExe`. I tore out all of the `NonClientIslandWindow` stuff - this is just a window with a xaml island.
* `CascadiaPackage` became `Package`. It does the vclibs hack again for the `TerminalConnection` dlls (because this package can't actually determine that `TerminalConnection.dll` requires `cprest*.dll`), as well as for `windowsterminal.exe` (which we'll need in the future for out-of-proc controls). I got rid of all the Dev/Preview/Release asset machinations as well.
Wherever possible, I changed filenames slightly so that they won't get accitdentally opened when someone tries to open a file by name in their editor (**cough** sublime's <kbd>ctrl+p</kbd> menu **cough**).
## Validation Steps Performed
The sample app launches, and displays a TermControl. What else do you want? <sup>(_rhetorical, not a prompt for a wishlist_)</sup>
(cherry picked from commit 30d6cf4839fca8ac8203f6c2489b02a4088b851e)
Summon, not toggle visibility, window on command line dispatch
## PR Checklist
* [x] Closes#10292
* [x] I work here
* [x] Manual test
## Detailed Description of the Pull Request / Additional comments
- This is the same as #10389, just a different route. I didn't realize it at the time.
## Validation Steps Performed
- Opened a window. Dispatched the `wt -w 0 - p <profile>` and watched it join/summon instead of minimize the active WT.
The flyout wasn't very polished, so I did some adjustments.
It's all visual changes, functionality should be the same.
* made the flyout use OverlayCornerRadius and 16px padding (to match WinUI 2.6)
* changed ColorPicker to muxc:ColorPicker for new styles (the color schemes picker too)
* changed "Custom" Button into a ToggleButton
* no longer needs ellipsis - localization files should be updated
* OK button was moved to the right and uses accent color
* adjusted margins and padding
* tweaked the color boxes to _look_ like the ones in color schemes
 
## Validation Steps Performed
* Color picker in settings UI still works ✔️
* Color picker for tabs still works ✔️
Activate window only (no toggle) when inbound connection arrives
## PR Checklist
* [x] Closes#10386
* [x] I work here
* [x] Manual test passed.
## Detailed Description of the Pull Request / Additional comments
The default for the `SummonWindowBehavior` is a toggle of the visibility state. I didn't realize that. We do not want that for inbound connections. We want always-brought-to-front.
## Validation Steps Performed
- Made the change. Launched Terminal as default as active window. Runbox'd another command. It didn't hide itself like it used to. Stays visible.
This PR adds a new PercentageSignConverter that appends the percentage sign to a number. The new converter is being used by the Acrylic opacity slider label and the Background image opacity slider label.
* [x] Closes#10289
## PR Checklist
* [x] Closes random crash that @lhecker sent me on Teams
* [x] I work here.
## Detailed Description of the Pull Request / Additional comments
- Any change to the renderer engine has to be done under lock. Leonard gave me a crash where the dirty rectangles changed out from under the renderer thread. By inspection, only one spot in `ControlCore` is modifying the engine outside of lock.... here. The dump is too far along to definitively prove the issue and it's sort of a race so its difficult to repro. But the theory is sound that all writes to the dirty regions must be done under lock. So here's a fix.
Restore embedded manifests to say 18362 or unpackaged activation won't work (for helix testing.)
## PR Checklist
* [x] Closes#10265
* [x] I work here
* [x] Tests now pass
## Detailed Description of the Pull Request / Additional comments
- Unpackaged activation uses the embedded manifest inside the exe. We use unpackaged activation to run our tests in Helix as it's easier that way. Turns out the 1903/19h1 OS thinks 19041 isn't greater than the minimum XAML islands version of 18226 and blocks the load of `TerminalApp.dll` causing a crash (fail fast) on launch. For **REASONS**, 18362 is considered greater than 18226.
- Packaged activation will use the value in the .appxmanifest and everything is somehow still fine there even with it saying 19041 now.
## Validation Steps Performed
- Kicking a Helix-run off on this branch: https://dev.azure.com/ms/terminal/_build/results?buildId=177336&view=results
Restore helix runs by passing parameters
## PR Checklist
* [x] Closes#10266
* [x] I work here
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
It looks like at some point the configuration and platform variables got messed up passing into the Helix steps and preventing the Powershell scripts from setting up the Helix payload correctly. This restores them to functionality.
## Validation Steps Performed
- Ran it in the pipeline
## Summary of the Pull Request
Incremental linking was disabled for debug builds only by mistake in the past.
It can't hurt to have it enabled for debug builds.
## PR Checklist
* [x] I work here
* [x] Project still builds
Update profiles schema to draft 2020-12 because as mentioned in https://github.com/microsoft/vscode/issues/98724#issuecomment-786502628, OpenAPI Specification 3.1 defines using JSON Schema 2020-12 and VS Code already has early implementation around it.
Basically, this just gets rid of the following error shown by VS Code when editing the settings.json file
```
Draft 2019-09 schemas are not yet fully supported.
```
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
Docs have been updated (for bug fixes/features)
docs update => proper capitalisation would be better. 👍: Github
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
### Other information:
Signed-off-by: Ayushman Singh Chauhan <ascb508@gmail.com>
Applies feedback from https://github.com/microsoft/terminal/pull/9949#pullrequestreview-662590658
Highlights include:
- bugfix: make all edit buttons stay visible if the user is using assistive technology
- rename a few functions and resources to match the correct naming scheme
- update the localized text for a conflicting key chord being assigned
- provide better comments throughout the actions page code
## References
#9949 - Original PR
Closes#10168
Just come cleanup I did not manage to get to before #9270 merged.
Specifically:
- We only initialize the animation and timer if we need them
- We don't repeatedly destroy/create the timer
## Validation Steps Performed
It still works
## Summary of the Pull Request
When the `runformat` script was updated to include xaml formatting, the new code failed to work if run from anywhere other than the project root. This PR updates the script so it can be run from anywhere.
## PR Checklist
* [x] Closes#9768
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
There were a couple of places in the script where it was collecting the list of xaml files by doing `git ls-files **/*.xaml`. That obviously relies on the code being executed from within the root of the project. I've now updated those queries to prefix the path with the `$root` variable, which points to the project root.
## Validation Steps Performed
I've run the `runformat` script from within the tools directory and confirmed that it now works correctly from there. I've tested by changing some formatting in both .cpp and .xaml files, and also saved some .xaml files with a BOM to make sure those were appropriately stripped.
C++/WinRT has a way to ensure that we use `make<>` instead of allocating
WinRT objects on the stack, but until 10.0.19041 the XAML compiler
generated code that violated that rule.
Because of how make detection is implemented, it must create a derived
type (and so WinRT implementation types can't be `final`).
I cannot for the life of me repro the original bug. I've got fonts with bad permissions SxS, I've tried installing a font twice, I've tried stopping the font cache service. No idea how to manually repro the original bug.
BUT theoretically, this function should never throw. So lets just switch this to a `LOG_IF_FAILED`, and hope that this goes away?
* [x] Fixes#10211?
* [x] built & ran manually.
Unclear if this can get cherry-picked trivially to 1.8. Code's pretty trivial though so if we need another PR for that, it can be arranged.
Stop startup crash by logging when monarch fails to register inbound connections, but still crash when COM attempted to start us
## References
- See also #10243
## PR Checklist
* [x] Closes#10233
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
- This should stop the crash on launch until we can get the internal teams to resolve the catalog issue
- I left the COM -Embedding start fail fast though so it won't take forever to time out (as default timeout is 3-5 minutes). I will change that if it becomes necessary.
## Validation Steps Performed
- I basically have to guess at this one based on the crash dump and Watson logs because it happens sporadically when the platform messes up on us.
ConptyConnection has two different failure modes:
1. We failed to initialize the pseudoconsole or create the process
2. The process exited with an error code.
Until this commit, they were treated the same way: closeOnExit=always
would force the pane/tab to be destroyed. This was very bad in case 1,
where we would display a (possibly useful) error message and then
immediately close the window.
This was made even worse by the change in #10045. We removed
startingDirectory validation and promoted it to an error message (so
that we could eventually let the connection handle startingDirectory in
its own way.) This of course revealed that a number of users had set
invalid starting directories… and those users included some who set
closeOnExit to always. Boom: instant "terminal opens and crashes"¹
In this commit, we introduce detection for a connection that fails
before it's been established. When that happens, we will ignore the
user's closeOnExit mode.
¹ It only looks like a crash; it's actually _technically_ functioning
properly.
Closes#10225.
Prevent crashes in Settings UI launch on OS versions before package management extensions
## PR Checklist
* [x] Closes#10106
* [x] I work here
* [x] Manual tests passed.
## Detailed Description of the Pull Request / Additional comments
- On older OS versions like 18363, some of the COM interfaces we use to look up information from the OS application package management catalog (to find default terminals) are unavailable. This returns `E_NOINTERFACE`. This then ends up returning an empty list of items and null as a selected item.
- I had intended for that to not return that particular error all the way up and just log it because the console and terminal lookup functions always return at least one element: the one representing the `conhost.exe` that is already on the machine.
- I have changed the "default packages" lookup to log instead of return failures like E_NOINTERFACE such that it can continue processing and make the "package" of the hardcoded `conhost.exe` default no matter what. (It will still return an error if there are somehow 0 packages because that code changed or some other catastrophic event happened...)
- I have also changed the Model to have a nulled DefaultTerminal model object (as all winrt objects are nullable) instead of using an optional. I did this because XAML is perfectly happy receiving a `nullptr` for a selected item and will just not select anything. By contrast, if it has an exception occur... it will just bubble that out and crash.
## Validation Steps Performed
- Simulated no items returned from list and nullptr returned to XAML on Current() method of Model. Validated XAML will happily select no item from list (and is fine with an empty list of items... that is it doesn't crash).
- Simulated downlevel OS returning package management errors in lookup catalog functions after the hardcoded default is added to the list. Ensured that this error is only logged, the remainder of the package identification functions make the hardcoded default package, and it is presented as your one and only option in the XAML.
Summon the listening window when it receives an inbound connection
## PR Checklist
* [x] Closes#9460
* [x] I work here.
* [x] Manual test.
## Detailed Description of the Pull Request / Additional comments
- We cannot just send our window to foreground by simply calling user32 on the window handle. But fortunately, the remoting behavior already has a summon window function with a workaround for the Quake functionality.
- This bubbles up an event from the TerminalApp's Page to the WindowsTerminal's Apphost so it can call the same window summoning behavior in IslandWindow as is triggered when the Monarch dictates this out of the Microsoft.Terminal.Remoting project.
## Validation Steps Performed
- Opened the Terminal with it registered as DefTerm. Activated some other windows to the foreground. Start > Run > Cmd. Tab connects and opens in existing Terminal and it is brought to foreground.
- With no running Terminal and registered as DefTerm, do Start > Run > Cmd. New Terminal is spawned and it is brought to foreground
## Summary of the Pull Request
VS16.10 and later contain two regressions:
* Marking the use of `pshpack*.h` in system headers with C4103
* The newly included, builtin `AssemblyReference.xaml` is missing the `AssemblyReferences` project capability
## PR Checklist
* [x] I work here
## Validation Steps Performed
Built the project with VS16.10 and VS17.0.
Correct Default Application Selector styles for high contrast and to change with OS theme dark/light toggle
## References
- https://docs.microsoft.com/windows/uwp/design/controls-and-patterns/xaml-theme-resources
## PR Checklist
* [x] Closes#10181
* [x] I work here
* [x] Manual tests passed
## Detailed Description of the Pull Request / Additional comments
1. If I'm going to override colors, I need to define styles in a resource dictionary with Light, Dark, and HighContrast variants so it can be appropriate for each of those.
2. For HighContrast, I need to not mess with text colors and let them follow the default settings.
3. For using System Brushes, I need to use a `ThemeResource` binding not a `StaticResource` binding. The former lets it change when you flip the OS toggle Light/Dark. The latter is stuck to whatever it was when the page loaded.
## Validation Steps Performed
- Loaded in light mode. Flipped to dark. Watched it change live. Checked both unselected and rollover/selected to ensure it was fine.
- Loaded in dark mode. Flipped to light. Watched it change live. Checked both unselected and rollover/selected to ensure it was fine.
- Flipped to HC. Watched it change live. Confirmed that unselected is black/white contrast and the roll over has the cyan/black. (No longer uses special second-line brush for HC, matches the controls I modeled this one on from OS Settings).
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds a new bellStyle called `window`. When `window` is set and a BEL is emitted, we flash the pane that emitted it.
Additionally, changes bellStyle in the SUI to a list of checkboxes instead of radio buttons, to match bellStyle being a flag-enum. Deprecates 'BellStyle::Visual' in the schema, but still allows it to be set in the json (it maps to `Window | Taskbar`)
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#6700
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
GIF in Teams
[Defapp] Use real HPCON for PTY management; Have Monarch always listen for connections
## PR Checklist
* [x] Closes#9464
* [x] Related to #9475 - incomplete fix
* [x] I work here.
* [x] Manual test
## Detailed Description of the Pull Request / Additional comments
- Sometimes peasants can't manage to accept a connection appropriately because I wrote defterm before @zadjii-msft's monarch/peasant architecture. The simple solution here is to just make the monarch always be listening for inbound connections. Then COM won't start a peasant with -Embedding just to ask the monarch where it should go. It'll just join the active window. I didn't close 9475 because it should follow monarch policies on which window to join... and it doesn't yet.
- A lot of interesting things are happening because this didn't have a real HPCON. So I passed through the remaining handles (and re-GUID-ed the interface) that made it possible for me to pack the right process handles and such into an HPCON on the inbound connection and monitor that like any other ConptyConnection. This should resolve some of the process exit behaviors and signal channel things like resizing.
Added trace to conhost to instrument buffers that are cooked prior to being passed to the console.
* [x] I've discussed this with core contributors already (internal)
VALIDATION
- Ensured trace is correctly logged in ETL (via TraceLog)
## Summary of the Pull Request
This is a redux of #8882.
From the original:
> This is really similar to what we're doing with the `CommandPalette`. We're adding a ~~Preview~~`KeyDown` handler to the SUI `MainPage`, that connects to `TerminalPage::_HandleKey`. That allows the SUI a chance to search the keymap to dispatch actions for keybindings, similar to how the command palette does it.
>
> This also means it's now possible for the SUI to invoke _all_ the actions available to the Terminal. This includes the ones like `IncreaseFontSize`, which require a _Terminal_ to actually do something. So we have to make sure all the calls to `_GetActiveControl` actually check that the result is non-null before using it.
>
> A bunch of the actions do nothing now from a SUI tab, others behave _weird_. Like "Rename tab" / "Open Tab Renamer" do nothing. "Duplicate Tab" again does nothing - we try making a new settings tab, which just focuses the settings tab again. "Copy text" definitely does nothing, same with paste.
I don't know why I thought this wouldn't work. I thought we'd have to do this in `PreviewKeyDown` or something, which led to [weirdness](https://github.com/microsoft/terminal/pull/8882#issuecomment-767088554). Turns out, we don't need it to be in `PreviewKeyDown`. It can just be in the SUI's `KeyDown`.
## References
* Original: #8882
* Workaround was in #8885
## PR Checklist
* [x] Closes#8767
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
The special case handler from #8885 is no longer needed
## Validation Steps Performed
* Switching tabs with Ctrl+Tab works
* Command palette works
* fullscreen, focus mode works
* close window works
* copy paste on Ctrl+C/V works, even when bound
* Select all text in textboxes works
* tab navigation through UI elements works
Each mouse-down event's time and position is now stored, and if we
process a left-mouse-down event at the same position as the previous one
and within the double click time we set the double click flag.
Also adds a case statement to `_UpdateSGRMouseButtonState` so that we
send hover events instead of ignoring them.
Note: The 'right-click menu in far manager shows up at the wrong
location' bug still exists with this, as it seems to use the cursor
position as told by user32.
Related to #376
## Validation Steps Performed
Double click in far manager works, hover in far manager works (hovering
over items in the right-click menu correctly highlights them)
Went for option 2 proposed here:
https://github.com/microsoft/terminal/issues/10140#issuecomment-845193132.
Disabling back space in the nested entry didn't felt as the nicest
solution. Instead now all state that keeps track of nested commands is
cleared when switching beteen modes.
## Validation Steps Performed
- Validated the specified issue is fixed by this change:. now after
entering a sub command and hitting backspace the palette no longer
shows the sub command item (here `< Select color scheme...` ).
- Validated that switching between all modes (command line, actions, tab
search & tab switch) still work as expected.
- Validated as well that all modes still work as expected.
Didn't add unit tests, but happy to try that out if this would be
required.
Closes#10140
## Summary of the Pull Request
Adds support for the `focusPane` action, and the `focus-pane` subcommand. These allow the user to focus a pane by it's ID.
* `focusPane` accepts an `id`, identifying the id of the pane to focus.
* `focus-pane`, `fp` requires the parameter `--target,-t` to ID the pane it's going to focus.
## PR Checklist
* [x] Closes#5803
* [x] Closes#5464
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - oh no
## Detailed Description of the Pull Request / Additional comments
The ID isn't _totally_ useful right now, since users can't see them. But they're there, and used in-order. This is just slightly more ergonomic for complicated commandlines than `mf up; mf left`
## Validation Steps Performed
Tested in command palette
Tested a variety of commandlines. `wtd -w 0 mf down ; sp` and `wtd -w 0 fp -t 1 ; sp` gave me special difficulty.
Now it just launches in focus mode, but you can _leave_ focus mode just fine.
I can't iterate on this more today - VS decided that it _needed_ an update ☹️
* [x] I work here
* [x] Is polish
* [x] @cinnamon-msft: We'll need to update the docs to reflect this.
see also: #8888, comments in that thread
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8881
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
* Preserve profile GUID upon item Tag creation.
* Use this GUID rather than the current profile GUID to select an item
upon settings update.
So even if the profile was renamed and the GUID has changed,
the GUID in the tag remains unchanged and can be found
upon discarding.
## Summary of the Pull Request
Check for null before serializing the default terminal. Because the _currentDefaultTerminal is only initialized when the `Launch` page is navigated to, this _could_ be null if you navigate to another page, save, then save again.
## PR Checklist
* [x] Closes#10003
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
It crashed consistently before, it doesn't now.
The bug that caused #9962 resulted in folks getting profiles written to
their settings that didn't contain any identifying information (name or
guid), sometimes multiple times.
These profiles look (somewhat) like this:
```json
{ "colorScheme": "Campbell" },
{},
```
An empty profile serves no purpose -- it shows up in the list as being
named "Default", and it only launches CMD (unless the commandline is the
thing that the user successfully changed.)
We can heal the settings file by simply ignoring those profiles that
have *no identifying information* (a guid or a name that can be
converted into a guid).
Validation
----------
I created a number of profiles that fit this format and made sure that
they were ignored on load and destroyed on save.
## PR Checklist
* [x] Closes an annoyance we discovered after 9962.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10097
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
This PR builds on the `ActionMap` PR (#6900) by leveraging `ActionMap` to serialize actions. From the top down, the process is now as follows:
- `CascadiaSettings`: remove the hack of copying whatever we had for actions before.
- `GlobalAppSettings`: serialize the `ActionMap` to `"actions": []`
- `ActionMap`: iterate over the internal `_ActionMap` (list of actions) and serialize each `Command`
- `Command`: **THIS IS WHERE THE MAGIC HAPPENS!** For _each_ key mapping, serialize an action. Only the first one needs to include the name and icon.
- `ActionAndArgs`: Find the relevant `IActionArgs` parser and serialize the `ActionAndArgs`.
- `ActionArgs`: **ANNOYING CHANGE** Serialize any args that are set. We _need_ each setting to be saved as a `std::optional`. As with inheritance, this allows us to distinguish an explicit setting to the default value (sometimes `null`) vs an implicit "give me the default value". This allows us to serialize only the relevant details of each action, rather than writing _all_ of the args.
## References
- #8100: Inheritance/Layering for lists
- This tracks layering and better serialization for color schemes _and_ actions. This PR resolves half of that issue. The next step is to apply the concepts used in this PR (and #9621) to solve the similar problem for color schemes.
- #6900: Actions page
## Validation Steps Performed
Tests added!
## Summary of the Pull Request
This replaces `ThrottledFunc` with two variants:
* `ThrottledFuncLeading` invokes the callback immediately and blocks further calls for the given duration
* `ThrottledFuncTrailing` blocks calls for the given duration and then invokes the callback
## References
* #9270 - `ThrottledFuncLeading` will allow the pane to flash immediately for a BEL, but block further BELs until the animation finished
## PR Checklist
* [x] I work here
* [ ] Tests added/passed
## Validation Steps Performed
* [x] Ensured scrolling still works
## Summary of the Pull Request
Introduces `til::rle`, a vector-like container which stores elements of
type T in a run length encoded format. This allows efficient compaction
of repeated elements within the vector.
## References
* #8000 - Supports buffer rewrite work. A re-use of `til::rle` will be
useful as a column counter as we pursue NxM storage and presentation.
* #3075 - The new iterators allow skipping forward by multiple units,
which wasn't possible under `TextBuffer-/OutputCellIterator`.
Additionally it also allows a bulk insertions.
* #8787 and #410 - High probability this should be `pmr`-ified
like `bitmap` for things like `chafa` and `cacafire`
which are changing the run length frequently.
## PR Checklist
* [x] Closes#8741
* [x] I work here.
* [x] Tests added.
* [x] Tests passed.
## Validation Steps Performed
* [x] Ran `cacafire` in `OpenConsole.exe` and it looked beautiful
* [x] Ran new suite of `RunLengthEncodingTests.cpp`
Co-authored-by: Michael Niksa <miniksa@microsoft.com>
## Summary of the Pull Request
Upgrade the Windows SDK to 19041 by setting `WindowsTargetPlatformMinVersion` to 17763 and `WindowsTargetPlatformVersion` to 19041.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
General usage of the Windows Terminal application appears fine.
## Summary of the Pull Request
This fixes a bug where if you had the `_quake` window open, and you tried to `globalSummon` it (not with the `quakeMode` action, but just with a plain-old `globalSummon` to activate the MRU window), we'd _create a new window_ instead of just summoning the `_quake` window.
## References
* regressed in #9956
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-60325142
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
It's basically a one-line fix, I just had to update the function signature for `_getMostRecentPeasantID` to allow us to use it differently for glomming vs summoning. When glomming, `ignoreQuakeWindow` should be true. When summoning, `ignoreQuakeWindow` should be false.
I'd personally chose to just bind `globalSummon` to <kbd>win+`</kbd>, but _I do as I'm told_.
* [x] I work here
* [x] @cinnamon-msft mentioned this
* [x] Docs
1. The TSFInputControl may get a layout event after it has been removed
from service (and no longer has a XAML tree)
* Two fixes:
* first, guard the layour updater from accessing detached xaml
objects
* second, shut down all pending throttled functions during close
(not destruction!¹)
2. The TermControlAutomationPeer may be destructed before its events
fire.
3. The TermControlAutomationPeer may receive a notification after it has
been detached from XAML (and therefore has no dispatcher).
¹ Close happens before the control is removed from the XAML tree;
destruction happens some time later. We must detach all UI-bound events
in Close so that they don't fire between when we detach and when we
destruct.
Fixes MSFT-32496693
Fixes MSFT-32496158
Fixes MSFT-32509759
Fixes MSFT-32871913
(cherry picked from commit 661fde5937)
This reverts commit a3a2a4102d.
#10046 causes a crash on save. MainPage::UpdateSettings() is unable to update the navigation view's selected item due to an "incorrect parameter". This is particularly strange to see because #10046 only modifies the navigation view's header, not the menu items themselves. Reverting this change fixes that crash (verified).
Reopens#9694
## Summary of the Pull Request
This PR lays the foundation for a new Actions page in the Settings UI as designed in #6900. The Actions page now leverages the `ActionMap` to display all of the key bindings and allow the user to modify the associated key chord or delete the key binding entirely.
## References
#9621 - ActionMap
#9926 - ActionMap serialization
#9428 - ActionMap Spec
#6900 - Actions page
#9427 - Actions page design doc
## Detailed Description of the Pull Request / Additional comments
### Settings Model Changes
- `Command::Copy()` now copies the `ActionAndArgs`
- `ActionMap::RebindKeys()` handles changing the key chord of a key binding. If a conflict occurs, the conflicting key chord is overwritten.
- `ActionMap::DeleteKeyBinding()` "deletes" a key binding by binding "unbound" to the given key chord.
- `ActionMap::KeyBindings()` presents another view (similar to `NameMap`) of the `ActionMap`. It specifically presents a map of key chords to commands. It is generated similar to how `NameMap` is generated.
### Editor Changes
- `Actions.xaml` is mainly split into two parts:
- `ListView` (as before) holds the list of key bindings. We _could_ explore the idea of an items repeater, but the `ListView` seems to provide some niceties with regards to navigating the list via the key board (though none are selectable).
- `DataTemplate` is used to represent each key binding inside the `ListView`. This is tricky because it is bound to a `KeyBindingViewModel` which must provide _all_ context necessary to modify the UI and the settings model. We cannot use names to target UI elements inside this template, so we must make the view model smart and force updates to the UI via changes in the view model.
- `KeyBindingViewModel` is a view model object that controls the UI and the settings model.
There are a number of TODOs in Actions.cpp will be long-term follow-ups and would be nice to have. This includes...
- a binary search by name on `Actions::KeyBindingList`
- presenting an error when the provided key chord is invalid.
## Demo
This is a hotfix to #10048. When the tab renamer is opened, we need to make sure to not immediately steal focus from it.
* [x] closes#10112
* [x] I work here
* [x] tested manually
## Summary of the Pull Request
This is a scoped implementation of "hide on minimize", only to the `_quake` window. When minimized, the `_quake` window won't appear in the taskbar. IT ALSO WON'T APPEAR IN THE TRAY, BECAUSE WE DON'T HAVE ONE YET.
I talked about this with @DHowett, and it seemed cool. Other windows will still minimize normally.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
* minimize to tray: #5727
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-61246940
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - probably yea, but something <sub>something <sub>something</sub></sub>
## Detailed Description of the Pull Request / Additional comments
After playing with it, it is in fact, cool.
ALSO `LOG_IF_WIN32_BOOL_FALSE` should DEFINITELY not be used with `ShowWindow`. [`ShowWindow`](https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-showwindow#return-value) returns false if the window was previously hidden, but doesn't `SetLastError`, so that macro will _throw_.
## Validation Steps Performed
```jsonc
{ "keys": "ctrl+`", "command": { "action": "quakeMode" } },
{ "keys": "ctrl+1", "command": { "action": "globalSummon", "name": "_quake" } },
// { "keys": "ctrl+1", "command": { "action": "globalSummon" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "desktop": "toCurrent" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "toggleVisibility": false } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "dropdownDuration": 2000 } },
{ "keys": "ctrl+2", "command": { "action": "globalSummon", "monitor": "any" } },
// { "keys": "ctrl+3", "command": { "action": "globalSummon", "desktop": "onCurrent" } },
{ "keys": "ctrl+3", "command": { "action": "globalSummon", "monitor": "toMouse" } },
// { "keys": "ctrl+4", "command": { "action": "globalSummon", "desktop": "any" } },
{ "keys": "ctrl+4", "command": { "action": "globalSummon", "monitor": "toMouse", "dropdownDuration": 500 } },
{ "keys": "ctrl+5", "command": { "action": "globalSummon", "dropdownDuration": 500 } },
```
#### ⚠️ this pr targets #9977
## Summary of the Pull Request
This adds support for part of the `monitor` property for `globalSummon`. It also goes a little off-spec:
```json
"monitor": "any"|"toCurrent"|"toMouse"
```
* `monitor`: This controls the monitor that the window will be summoned from/to
- `"any"`: Summon the MRU window, regardless of which monitor it's currently on.
- `"toCurrent"`/omitted: (_default_): Summon the MRU window **TO** the monitor with the current **foreground** window.
- [**NEW**] `"toMouse"`: Summon the MRU window **TO** the monitor where the **mouse** cursor is.
When I was playing with this, It felt like `toMouse` was always what I wanted, not `toCurrent`. We can always just comment that out if we think that's contentious - I'm aware I didn't originally spec that.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-60325291
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated 😢
## Detailed Description of the Pull Request / Additional comments
I made `toMouse` the default because it felt better. fite-me.jpg
## Validation Steps Performed
my ever evolving blob:
```jsonc
{ "keys": "ctrl+`", "command": { "action": "quakeMode" } },
{ "keys": "ctrl+1", "command": { "action": "globalSummon" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "desktop": "toCurrent" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "toggleVisibility": false } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "dropdownDuration": 2000 } },
{ "keys": "ctrl+2", "command": { "action": "globalSummon", "monitor": "any" } },
// { "keys": "ctrl+3", "command": { "action": "globalSummon", "desktop": "onCurrent" } },
{ "keys": "ctrl+3", "command": { "action": "globalSummon", "monitor": "toMouse" } },
// { "keys": "ctrl+4", "command": { "action": "globalSummon", "desktop": "any" } },
{ "keys": "ctrl+4", "command": { "action": "globalSummon", "monitor": "toMouse", "dropdownDuration": 500 } },
{ "keys": "ctrl+5", "command": { "action": "globalSummon", "dropdownDuration": 500 } },
```
## Summary of the Pull Request
Adds the `dropdownDuration` property to `globalSummon`. This controls how fast the window appears on the screen when summoned from minimized. It similarly controls the speed for sliding out of view when the window is dismissed with `"toggleVisibility": true`.
`dropdownDuration` specifies the duration in **milliseconds**. This defaults to `0` for `globalSummon`, and defaults to `200` for `quakeMode`. 200 was picked because, according to [`AnimateWindow`](https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-animatewindow):
> Typically, an animation takes 200 milliseconds to play.
Do note that you won't be able to interact with the window during the animation! Input sent during the dropdown will arrive at the end of the animation, but input sent during the slide-up _won't_. Avoid setting this to large values!
The gifs are in Teams.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-59030824
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I had the following previously in the doc comments, but it feels better in the PR body:
- This was chosen because it was easier to implement and generally nicer than:
* `AnimateWindow`, which would show the window borders for the duration of
the animation, and occasionally just plain not work. Additionally, for
`AnimateWindow` to work, the window much not be visible, so we'd need to
first restore the window, then hide it, then animate it. That would flash
the taskbar.
* `SetWindowRgn` on the root HWND, which caused the xaml content to shift to
the left, and caused a black bar to be drawn on the right of the window.
Presumably, `SetWindowRgn` and `DwmExtendFrameIntoClientArea` did not play
well with each other.
* `SetWindowPos(..., SWP_NOSENDCHANGING)`, which worked the absolute best for
longer animations, and is the closest to the actual implementation of
`AnimateWindow`. This would resize the ROOT window, without sending resizes
to the XAML island, allowing the content to _not_ reflow. but for a
duration of 200ms, would only ever display ~2 frames. That's basically
not even animation anymore, it's now just an "appear". Since that's how
long the default animation is, if felt silly to have it basically not
work by default.
- If a future reader would like to implement this better, **they should feel
free to**, and not mistake my notes here as expertise. These are research
notes into the dark and terrible land that is Win32 programming. I'm no expert.
## Validation Steps Performed
This is the blob of json I'm testing with these days:
```jsonc
{ "keys": "ctrl+`", "command": { "action": "quakeMode" } },
{ "keys": "ctrl+1", "command": { "action": "globalSummon" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "desktop": "toCurrent" } },
// { "keys": "ctrl+2", "command": { "action": "globalSummon", "toggleVisibility": false } },
{ "keys": "ctrl+2", "command": { "action": "globalSummon", "dropdownDuration": 2000 } },
{ "keys": "ctrl+3", "command": { "action": "globalSummon", "desktop": "onCurrent" } },
{ "keys": "ctrl+4", "command": { "action": "globalSummon", "desktop": "any" } },
```
* <kbd>ctrl+\`</kbd> will summon the quake window with a _quick_ animation
* <kbd>ctrl+2</kbd> will summon the window with a s l o w animation
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds a global setting, `experimental.detectHyperlinks`, that controls whether we automatically detect links and make them clickable. Default is set to true.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9981
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
When `detectHyperlinks` is set to false, links do not underline on hover and are not clickable.
While a user is formulating their hex string for a `tabColor` arg
in the CommandPalette, we try to parse the string one char at
a time as it comes in. `ColorFromHexString` doesn't like anything
except a well formed hex string so it'll throw. We can probably eat
any error that comes out of this because we should only care to set
the TabColor once the string provided is a valid hex str.
Closes#10053
Set keyword flags on all events so those sharing a provider with
telemetry do not fire unless tracing is enabled
## PR Checklist
* [x] Closes#10093
* [x] I work here
* [x] Tests passed
* [x] Documentation added in `til.h` about how keywords work and at the
only other site of keywords we define in the Host project tracing
files.
## Detailed Description of the Pull Request / Additional comments
I initially thought that we would need to split providers here to
accomplish this... but @DHowett helped me realize that might be a lot of
additional metadata and bloat binary size. So with help from a friend
from fundamentals, I realized that we could use Keywords to
differentiate here. We can no longer define 0 keywords as that
represents an any/all scenario. Every `TraceLoggingWrite` event now
needs a keyword. When our events have a keyword, they're not included in
any trace. Additionally, when we have an explicit keyword to check that
is different from the ones used for the telemetry pipeline, we can
ensure that we only do "hard work" to generate debug trace data when an
"ALL" type listener like TraceView or Windows Performance Recorder with
our profiles is listening to these providers for ALL keyworded events.
## Validation Steps Performed
- [x] - Built with full release build config to confirm performance is
worse than dev builds BECAUSE of the telemetry event collector camping
our provider and triggering full trace event generation on shared
providers.
- [x] - Built with full release build config to enable statistics
collection and validated trace event collection is excluded and trace
event short-circuits work with this change.
- [x] - Checked that TraceView still sees both telemetry and tracing
events
- [x] - Checked that WPR with our .wprp profile sees both telemetry and
tracing events
Co-authored-by: Josh Soref <jsoref@users.noreply.github.com>
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Upgrade check-spelling to [v0.0.18](https://github.com/check-spelling/check-spelling/releases/tag/v0.0.18)
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
I've replaced the `dictionary` directory with `allow` and `reject`. When terminal got check-spelling, I didn't have a way to do `allow`/`reject` (but they were added a while ago). With this release, the bot will complain about items that are in user managed files that wouldn't be valid, this is mostly `-`s in dictionary files, but it also includes numbers `0`..`9` and `_`. If a specific token needs to be accepted but not its sub-elements, the item should be added to `patterns.txt` instead (`D2DERR_SHADER_COMPILE_FAILED` is an example).
With this version, check-spelling defaults to only considering tokens with at least 3 letters. It's possible to tune it back to 2 (or even 1), but in testing, the 2 character tokens have ended up not being worthwhile. (This can be [adjusted](https://github.com/check-spelling/check-spelling/wiki/Configuration#shortest_word) if it turns out that people manage to misspell two character tokens often enough to justify checking them.)
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I ran a number of passes of the spell checker in https://github.com/check-spelling/terminal/actions (note: I tend to delete this repository, so this link may be dead at some point, and action run logs expire).
Implement PGO in pipelines for AMD64 architecture; supply training test scenarios
## References
- #3075 - Relevant to speed interests there and other linked issues.
## PR Checklist
* [x] Closes#6963
* [x] I work here.
* [x] New UIA Tests added and passed. Manual build runs also tested.
## Detailed Description of the Pull Request / Additional comments
- Creates a new pipeline run for creating instrumented binaries for Profile Guided Optimization (PGO).
- Creates a new suite of UIA tests on the full Windows Terminal app to run PGO training scenarios on instrumented binaries (and incidentally can be used to write other UIA tests later for the full Terminal app.)
- Creates a new NuGet artifact to store trained PGO databases (PGD files) at `Microsoft.Internal.Windows.Terminal.PGODatabase`
- Creates a new NuGet artifact to supply large-scale test content for automated tests at `Microsoft.Internal.Windows.Terminal.TestContent`
- Adjusts the release pipeline to run binaries in PGO optimized mode where content from PGO databases is leveraged at link time to optimize the final release build
The following binaries are trained:
- OpenConsole.exe
- WindowsTerminal.exe
- TerminalApp.dll
- TerminalConnection.dll
- Microsoft.Terminal.Control.dll
- Microsoft.Terminal.Remoting.dll
- Microsoft.Terminal.Settings.Editor.dll
- Microsoft.Terminal.Settings.Model.dll
In the future, adding `<PgoTarget>true</PgoTarget>` to a new `vcxproj` file will automatically enroll the DLL/EXE for PGO instrumentation and optimization going forward.
Two training test scenarios are implemented:
- Smoke test the Terminal by just opening it and typing a bit of text then exiting. (Should help focus on the standard launch path.)
- Optimize bulk text output by launching terminal, outputting `big.txt`, then exiting.
Additional scenarios can be contributed to the `WindowsTerminal_UIATests` project with the `[TestProperty("IsPGO", "true")]` annotation to add them to the suite of scenarios for PGO.
**NOTE:** There are currently no weights applied to the various test scenarios. We will revisit that in the future when/if necessary.
## Validation Steps Performed
- [x] - Training run completed at https://dev.azure.com/ms/terminal/_build?definitionId=492&_a=summary
- [x] - Optimization run completed locally (by forcing `PGOBuildMode` to `Optimize` on my local machine, manually retrieving the databases with NuGet, and building).
- [x] - Validated locally that x86 and ARM64 do not get trained and automatically skip optimization as databases are not present for them.
- [x] - Smoke tested optimized binary versus latest releases. `big.txt` output through CMD is ~11-12seconds prior to PGO and just over 8 seconds with PGO.
## Summary of the Pull Request
Adds the profile icons to the page header. I had to manually create the header, and manually bind it to the `Icon` and `Content` of each `NavViewItem`.
It's important that each `NavViewItem`'s icon is set as an `IconSource`, so that we can bind to it. If it's just a plain old `FontIcon`, then we can't re-use it.
Additionally, I removed the manual sizing of all font icons to font size 12. That would make font icons _tiny_ in the header. Now, they'll properly re-use the size of the `NavigationViewTitleHeaderContentControlTextStyle` in the nav view header. This involved also manually making the icons smaller on the `AddProfile` page and in the `CommandPalette`.
As per usual, images are in Teams
## PR Checklist
* [x] Closes#9694
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Checked (bitmap|font) icons in tabs
* (bitmap|font) icons in the flyout
* (bitmap|font) icons in command palette
* (bitmap|font) icons in the nav view
* (bitmap|font) icons in the header
* (bitmap|font) icons in the add profile page
This is primarily being done to unblock #9223.
Prior to this, we'd validate that the user's `startingDirectory` existed
here. If it was invalid, we'd gracefully fall back to `%USERPROFILE%`.
However, that could cause hangs when combined with WSL. When the WSL
filesystem is slow to respond, we'll end up waiting indefinitely for
their filesystem driver to respond. This can result in the whole terminal
becoming unresponsive.
Similarly, with #9223 we want users to be able to specify WSL paths in a
profile, but this bit of validation logic totally prevents that from working,
because it'll just replace the path with `%USERPROFILE%`.
If the path is eventually invalid, we'll display warning in the
`ConptyConnection`, when the process fails to launch.
Closes#9541Closes#9114
I believe that there is a hidden "default branch" setting in Azure
DevOps, and ours is set to "master". CG only attempts to automatically
inject to builds off the default branch... and because we're a GitHub
repo running builds in AzDO we _can't change what the default branch
is_. Oops.
A redo of #6290. That PR was overkill. In that one, we'd toss focus back to the active control any time that the tab view item got focus. That's maybe not the _best_ solution.
Instead, this PR is precision strikes. We're re-using a lot of what we already have from #9260.
* When the context menu is closed, yeet focus to the control.
* When the renamer is dismissed, yeet focus to the control.
* When the TabViewItem is tapped (meaning no one else handled it), yeet focus to the control.
### checklist
* [x] I work here
* [ ] This is UI so it doesn't have tests
* [x] Closes#3609
* [x] Closes#5750
* [x] Closes#6680
### scenarios:
* [x] focus the window by clicking on the tab -> Control is focused.
* [x] Open the color picker with the context menu, can move the focus inside the picker with the arrow keys.
* [x] Dismiss the picker with esc -> Control is focused.
* [x] Dismiss the picker with enter -> Control is focused.
* [x] Dismiss the renamer with esc -> Control is focused.
* [x] Dismiss the renamer with enter -> Control is focused.
* [x] Dismiss the context menu with esc -> Control is focused.
* [x] Start renaming, then click on the tab -> Rename is committed, Control is focused.
* [x] Start renaming, then click on the text box -> focus is still in the text box
This test has some load bearing specifics in it.
In short, it must trigger multiple boost::small_vector growths. The
vector is reused for the lifetime of the console (!) so it must be
forced to act the way the repro requires.
Oh, and the test needs to be run with Application Verifier +Heap.
This validates the fix in c0ab9cb5b5.
## Summary of the Pull Request
ControlCore::AttachUiaEngine receives a IRenderEngine as a raw pointer,
which TermControl owns. We must ensure that we first destroy the
ControlCore before the UiaEngine instance (both owned by TermControl).
Otherwise a deallocated IRenderEngine is accessed when
ControlCore calls Renderer::TriggerTeardown.
## References
This crash was introduced in #10031.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Run accevent.exe to cause a UiaEngine to be attached to a TermControl.
* Close the current tab
* Ensured no crashes occur
Until there's a "Wait", there's usually only one API message inflight at
a time.
In our quest for performance, we put that single API message in charge
of its own buffer management: instead of allocating buffers on the heap
and deleting them later (storing pointers to them at the far corners of
the earth), it would instead allocate them from small internal pools (if
possible) and only heap allocate (transparently) if necessary. The
pointers flung to the corners of the earth would be pointers (1) back
into the API_MSG or (2) to a heap block owned by boost::small_vector.
It took us months to realize that those bare pointers were being held by
COOKED_READ and RAW_READ and not actually being updated when the API
message was _copied_ as it was shuffled off to the background to become
a "Wait" message.
It turns out that it's trivially possible to crash the console by
sending two API calls--one that waits and one that completes
immediately--when the waiting message or the "wait completer" has a
bunch of dangling pointers in it. It further turns out that some
accessibility software (like JAWS) attaches directly to the console
session, much like winpty and ConEmu and friends. They're trying to read
out the buffer (API call!) and sometimes there's a shell waiting for
input (API call!). Oops.
In this commit, we fix up the message's internal pointers (in lieu of
giving it a proper copy constructor; see GH-10076) and then tell the
wait completion routine (which is going to be a COOKED_READ, RAW_READ,
DirectRead or WriteData) about the new buffer location.
This is a scoped fix that should be replaced (TODO GH-10076) with a
final one after Ask mode.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev eca0875950fd3a9735662474613405e2dc06f485
References GH-10076
Fixes MSFT-33127449
Fixes GH-9692
The ES folks removed support for implicit binary dependencies in test projects, which required our testmd to change to include its dependency on testnetv5.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a2a74747feda018c347ba787e166e8385bb17e47
Related work items: MSFT-31480819
## PR Checklist
* [x] Closes#9920
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
- When opening a profile page and selecting a random pivot, when then navigating away from the profile page to another item and navigating back to the same profile the last selected pivot was still active.
- When opening a profile page and selecting a random pivot, when then navigating away from the profile page to a second profile the last selected pivot was immediately active on the second profile.
- When selecting random pivots and navigating only between other profile pages the last selected pivot was always active on the opened profile page.
What felt a bit strange at first sight was:
- open a profile page, select a random pivot
- start adding a new profile
- the last selected pivot is immediately active and not the "General" pivot what might be the obvious pivot to show when a user wants to add a new profile.
After playing a bit more with this this started to feel ok. Since as a user you might go to "Add new profile" immediately anyway instead of opening other profiles first.
Just explicitly highlighting this last point since maybe someone prefers that we need to make sure to always start with the 'General' pivot when adding a new profile and then this fix is not correct.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
When the client application sets the console input mode with the `ENABLE_MOUSE_INPUT` flag, we send along the appropriate VT sequences to the connected terminal (if there is one).
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#376#6859
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Far manager works
## Summary of the Pull Request
When we parse OSC 9;4, allow a trailing semicolon (i.e. allow `9;4;` or something like `9;4;3;`).
## PR Checklist
* [x] Closes#9960
* [X] Tests added/passed
## Validation Steps Performed
OSC 9;4 sequences with or without trailing semicolons work
This entirely removes `KeyMapping` from the settings model, and builds on the work done in #9543 to consolidate all actions (key bindings and commands) into a unified data structure (`ActionMap`).
## References
#9428 - Spec
#6900 - Actions page
Closes#7441
## Detailed Description of the Pull Request / Additional comments
The important thing here is to remember that we're shifting our philosophy of how to interact/represent actions. Prior to this, the actions arrays in the JSON would be deserialized twice: once for key bindings, and again for commands. By thinking of every entry in the relevant JSON as a `Command`, we can remove a lot of the context switching between working with a key binding vs a command palette item.
#9543 allows us to make that shift. Given the work in that PR, we can now deserialize all of the relevant information from each JSON action item. This allows us to simplify `ActionMap::FromJson` to simply iterate over each JSON action item, deserialize it, and add it to our `ActionMap`.
Internally, our `ActionMap` operates as discussed in #9428 by maintaining a `_KeyMap` that points to an action ID, and using that action ID to retrieve the `Command` from the `_ActionMap`. Adding actions to the `ActionMap` automatically accounts for name/key-chord collisions. A `NameMap` can be constructed when requested; this is for the Command Palette.
Querying the `ActionMap` is fairly straightforward. Helper functions were needed to be able to distinguish an explicit unbinding vs the command not being found in the current layer. Internally, we store explicitly unbound names/key-chords as `ShortcutAction::Invalid` commands. However, we return `nullptr` when a query points to an unbound command. This is done to hide this complexity away from any caller.
The command palette still needs special handling for nested and iterable commands. Thankfully, the expansion of iterable commands is performed on an `IMapView`, so we can just expose `NameMap` as a consolidation of `ActionMap`'s `NameMap` with its parents. The same can be said for exposing key chords in nested commands.
## Validation Steps Performed
All local tests pass.
- Whenever we add a new profile setting from now on we have to update
`Profile::CopySettings` _and_ `CascadiaSettings::DuplicateProfile` 👎
Notes from bug bash (checked bugs have been resolved):
- [ ] The duplicate list can be very long if you have profiles
- [x] DH: "Create new" seems too vague. "New empty profile" or something
seems a little clearer to me.
- [x] There is no deduplication counter for name
- [x] Crash when your settings file is corrupt and we had to fall back
to the defaults and you duplicate a profile
- [x] Crash due to #10003
## PR Checklist
* [x] Closes#9121
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9941
* [x] CLA signed.
## Detailed Description of the Pull Request / Additional comments
The bug is due to us using std::tolower, while the default locale is not user's locale.
The fix here is to use the same approach as upon sorting: lstrcmpi.
While there are additional methods to do locale aware comparison,
here we convert chars to string and call lstrcmpi.
While this approach seems somewhat inefficient it ensures consistency
(with the order of locales that lstrcmi tries to apply internally).
## Summary of the Pull Request
This PR encompasses the first three bugs we found post-#9820.
### A: Mousedown, select, SCROLL does a weird thing with endpoints that doesn't happen in stable
We were using the terminal position to set the selection anchor, when we should have used the pixel position.
This is fixed in 4f4df01.
### B: Trackpad scrolling down with small increments seems buggy
This one's the most complicated. The touchpad sends very many small scroll deltas, less than one row at a time. The control scrollbar can store a `double`, so small deltas can accumulate. Originally, these would accumulate in the scrollbar, and we'd only read that out as an `int` in the scrollbar updater, which is throttled.
In the interactivity split, there's no place for us to store that double. We immediately narrow to an `int` for `ControlInteractivity::_updateScrollbar`.
So this introduces a double inside `ControlInteractivity` as a fake scrollbar, with which to accumulate to.
This is fixed in 33d29fa...0fefc5b
### C: Looks like there's a selection issue when you click and drag too quickly.
The diff for this one is:
<table>
<tr><td>1.8</td><td>main</td></tr>
<tr>
<td>
```c++
if (_singleClickTouchdownPos)
{
// Figure out if the user's moved a quarter of a cell's smaller axis away from the clickdown point
auto& touchdownPoint{ *_singleClickTouchdownPos };
auto distance{ std::sqrtf(std::powf(cursorPosition.X - touchdownPoint.X, 2) + std::powf(cursorPosition.Y - touchdownPoint.Y, 2)) };
const til::size fontSize{ _actualFont.GetSize() };
const auto fontSizeInDips = fontSize.scale(til::math::rounding, 1.0f / _renderEngine->GetScaling());
if (distance >= (std::min(fontSizeInDips.width(), fontSizeInDips.height()) / 4.f))
{
_terminal->SetSelectionAnchor(_GetTerminalPosition(touchdownPoint));
// stop tracking the touchdown point
_singleClickTouchdownPos = std::nullopt;
}
}
```
</td>
<td>
```c++
if (_singleClickTouchdownPos)
{
// Figure out if the user's moved a quarter of a cell's smaller axis away from the clickdown point
auto& touchdownPoint{ *_singleClickTouchdownPos };
float dx = ::base::saturated_cast<float>(pixelPosition.x() - touchdownPoint.x());
float dy = ::base::saturated_cast<float>(pixelPosition.y() - touchdownPoint.y());
auto distance{ std::sqrtf(std::powf(dx, 2) +
std::powf(dy, 2)) };
const auto fontSizeInDips{ _core->FontSizeInDips() };
if (distance >= (std::min(fontSizeInDips.width(), fontSizeInDips.height()) / 4.f))
{
_core->SetSelectionAnchor(terminalPosition);
// stop tracking the touchdown point
_singleClickTouchdownPos = std::nullopt;
}
}
```
</td>
</tr>
</table>
```c++
_terminal->SetSelectionAnchor(_GetTerminalPosition(touchdownPoint));
```
vs
```c++
_core->SetSelectionAnchor(terminalPosition);
```
We're now using the location of the drag event as the selection anchor, instead of the location that the user initially clicked. Oops.
## PR Checklist
* [x] Checks three boxes, though I'll be shocked if they're the last.
* [x] I work here
* [x] Tests added/passed 🎉🎉🎉
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
All three have tests, 🙌🙌🙌🙌
## Validation Steps Performed
Manual, and automated via tests
## Summary of the Pull Request
Let the dropdown menu open downwards if there's enough space, when clicking on the down arrow.
## PR Checklist
* [X] Closes#8924
* [X] CLA signed.
## Detailed Description of the Pull Request / Additional comments
Set the placement of the flyout to BottomEdgeAlignedLeft, as was done when opening the menu from the key binding.
## Validation Steps Performed
Manual tests
## Summary of the Pull Request
This is to mitigate MSFT:33035972. If you call `MoveWindowToDesktop` while an app is set to "Show windows from this app on all desktops", the OS will clear that "Show windows from this app on all desktops" state. But it _won't_ clear that state from the task view, so it'll just plain look broken.
We can mitigate this just by checking if we're already on the current desktop first. "Show windows from this app on all desktops" windows will _always_ be on every desktop, so that API will return true, and we can avoid tearing the state.
## References
* added in #9954
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-60325102
* [x] I work here
* [ ] Tests aren't possible
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* it works again
When syncing terminals across users (i.e. Liveshare shared terminals),
the terminal size is synced. This leads to having unused space around
the terminal which is the same color as the terminal's background
causing confusion as to what space is usable within the terminal.
Instead this change allows consumers to set the background color of the
control, separate from the terminal renderer's background, which makes
it easier to identify the edges of the terminal.
## Summary of the Pull Request
ControlCore's _renderer (IRenderTarget) is allocated as std::unique_ptr,
but is given to Terminal::CreateFromSettings as a reference.
ControlCore::Close deallocates the _renderer, but if ThrottledFuncs
are still scheduled to call ControlCore::UpdatePatternLocations
it'll cause Terminal::UpdatePatterns to be called, which in turn ends up
accessing the deallocated IRenderTarget reference and lead to a crash.
A proper solution with shared pointers is nontrivial and should be
attempted at a later point in time. This solution moves the teardown of
the _renderer into ControlCore::~ControlCore, where we can be certain
that no further strong references are held by ThrottledFuncs.
## PR Checklist
* [x] Closes#9910
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
The crash is a race condition and inherently hard to reproduce.
During validation this PR didn't appear to introduce new crashes.
This PR introduces a mechanism via which DCS data strings can be passed
through directly to the dispatch method that will be handling them, so
the data can be processed as it is received, rather than being buffered
in the state machine. This also simplifies the way string termination is
handled, so it now more closely matches the behaviour of the original
DEC terminals.
* Initial support for DCS sequences was introduced in PR #6328.
* Handling of DCS (and other) C1 controls was added in PR #7340.
* This is a prerequisite for Sixel (#448) and Soft Font (#9164) support.
The way this now works, a `DCS` sequence is dispatched as soon as the
final character of the `VTID` is received. Based on that ID, the
`OutputStateMachineEngine` should forward the call to the corresponding
dispatch method, and its the responsibility of that method to return an
appropriate handler function for the sequence.
From then on, the `StateMachine` will pass on all of the remaining bytes
in the data string to the handler function. When a data string is
terminated (with `CAN`, `SUB`, or `ESC`), the `StateMachine` will pass
on one final `ESC` character to let the handler know that the sequence
is finished. The handler can also end a sequence prematurely by
returning false, and then all remaining data bytes will be ignored.
Note that once a `DCS` sequence has been dispatched, it's not possible
to abort the data string. Both `CAN` and `SUB` are considered valid
forms of termination, and an `ESC` doesn't necessarily have to be
followed by a `\` for the string terminator. This is because the data
string is typically processed as it's received. For example, when
outputting a Sixel image, you wouldn't erase the parts that had already
been displayed if the data string is terminated early.
With this new way of handling the string termination, I was also able to
simplify some of the `StateMachine` processing, and get rid of a few
states that are no longer necessary. These changes don't apply to the
`OSC` sequences, though, since we're more likely to want to match the
XTerm behavior for those cases (which requires a valid `ST` control for
the sequence to be accepted).
## Validation Steps Performed
For the unit tests, I've had to make a few changes to some of the
`OutputEngineTests` to account for the updated `StateMachine`
processing. I've also added a new `StateMachineTest` to confirm that the
data strings are correctly passed through to the string handler under
all forms of termination.
To test whether the framework is actually usable, I've been working on
DRCS Soft Font support branched off of this PR, and haven't encountered
any problems. To test the throughput speed, I also hacked together a
basic Sixel parser, and that seemed to perform reasonably well.
Closes#7316
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
👋 Just a minor change to fix an outdated link.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
N/A - subject matter expert
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Original link was demised late 2020. Updated link to be correct.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This adds a `toggleVisibility` parameter to `globalSummon`.
* When `true` (default): when you press the global summon keybinding, and the window is currently the foreground window, we'll minimize the window.
* When `false`, we'll just do nothing.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Checks a box in #8888
* [x] closes https://github.com/microsoft/terminal/projects/5#card-59030814
* [x] I work here
* [ ] No tests for this one.
* [ ] yes yes eventually I'll come back on the docs
## Detailed Description of the Pull Request / Additional comments
I've got nothing extra to add here. This one's pretty simple. I'm only targeting #9954 since that one laid so much foundation to build on, with the `SummonBehavior`
## Validation Steps Performed
Played with this for a while, and it's amazing.
This adds support for the `desktop` param to the `globalSummon` action. It accepts 3 values:
* `toCurrent` (default): The window moves to the current desktop when it's summoned
* `any`: We don't care what desktop the window is on. We'll go to the desktop the window is on when we summon it.
* `onCurrent`: We'll only try to summon the MRU window on this desktop when summoning a window.
* When combined with `name`, if there's a window matching `name`, we'll move it to this desktop.
* If there's not a window on this desktop, and `name` is omitted, then we'll make a new window.
`quakeMode` was also updated to use `toCurrent` behavior by default.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Checks some boxes in #8888
* [x] closes https://github.com/microsoft/terminal/projects/5#card-59030845
* [x] I work here
* [x] Tests added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
S/O to https://github.com/microsoft/PowerToys, who graciously let us use `VirtualDesktopUtils` for figuring out what desktop is the current desktop. Yea, that's all we needed that entire file for. No, there isn't an API for this (_surprised-pikachu.png_)
## Validation Steps Performed
Played with this for a while, and it's amazing.
Adds support for two new actions:
* `globalSummon`, which can be used to activate a window using a _global_ (READ: OS-level) hotkey.
- accepts an optional `name` argument. When provided, this will attempt to summon with the given name. When omitted, we'll try to summon the most recent window.
* `quakeMode` which is `globalSummon` for the `_quake` window.
These actions are stored in the actions array, but are read by the `WindowsTerminal` level and bound to the OS in `IslandWindow`. The monarch registers for these keybindings with the OS. When one is pressed, the monarch will recieve a `WM_HOTKEY` message. It'll use that to look up the corresponding action args. It'll use those to try and summon the right window.
## References
* #8888: Quake mode megathread
* #9274: Spec (**guys seriously i just need one more ✔️**)
* #9785: The start of granting "\_quake" super powers
## PR Checklist
* [x] Closes#653 - I'm gonna say this closes it for now, though we have _many_ follow-ups in #8888
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Validated that it works with `win` keys
* Validated that it works without `win` keys
* Validated that it hot-reloads
* Validated that it moves to the new monarch
* Validated that you can bind both `globalSummon` and `quakeMode` at the same time and do different things
* Validated that you can bind `globalSummon` with a name and it creates that name if it doesn't already exist
This PR aims to optimize the text analysis process by breaking the text
into simple & complex runs according to the result of
`GetTextComplexity`. For simple runs, we can skip certain processing
steps to improve the analysis performance.
Previous to this PR, we rely on the result of `AnalyzeBidi`,
`AnalyzeScript` and `AnalyzeNumberSubstitution` to both break the text
into different runs and attach the corresponding
bidi/script/number_substitution information to the run. Thanks to #6695
we have the chance to skip the expensive analysis process when we found
the *entire text* is determined to be simple.
Inspired by https://github.com/microsoft/cascadia-code/issues/411 and
discussions in #9156, I found that the "entire text simplicity" is often
hard to meet. In order to fully utilize the complexity information of
the text, we need to first break the text into simple & complex ranges.
These ranges are also the initial runs prior to the
bidi/script/number_substitution analysis. This way we can skip the text
analysis for simple runs to speed up the process.
VALIDATION
Build & run cmatrix, cacafire, cat big.txt with it.
Initial simple run PR: #6695Closes#9156
#9962 was caused by a serialization bug. _Technically_, `ToJson` works
as intended: if the current layer has any values set, write them out to
the json. However, on first load, the dynamic profile `Profile` objects
are actually empty (because they inherit from base layer, then the
dynamic profile generator). This means that `ToJson` writes the dynamic
profiles as empty objects `{}`. Then, on reload, we see that the dynamic
profiles aren't in the JSON, and we write them again.
To get around this issue, we added a simple check to `Profile::ToJson`:
if we have a source, make sure we write out the name, guid, hidden, and
source. This is intended to align with `Profile::GenerateStub`.
Closes#9962
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes code health failure since 66b9b9d6f1
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Implement dropdown menu for choosing a default terminal application from inside the Windows Terminal Settings UI
## PR Checklist
* [x] Closes#9463
* [x] I work here.
* [x] Manual tests passed
* [x] https://github.com/MicrosoftDocs/terminal/issues/314 (and cross reference #9462)
## Detailed Description of the Pull Request / Additional comments
- Adds dropdown menu and a template card for displaying the available default applications (using the same lookup code as the console property sheet `console.dll`)
- Adds model to TSM for adapting the data for display and binding on XAML
- Lookup occurs on every page reload. Persistence only happens on Save Changes.
- Manifest changed for Terminal to add capability to opt-out of registry redirection so we can edit this setting
## Validation Steps Performed
- [x] Flipped the menu and pressed Save Changes and launched cmd from run box... it moved between the two.
- [x] Flipped system theme from light to dark and ensured secondary color looked good
- [x] Flipped the status with a different mechanism (conhost propsheet) and then reopened settings page and confirmed it loaded the updated status
## Summary of the Pull Request
I came across a few build system bug fixes, which served their purpose now that VS 16.9 has been released.
## PR Checklist
* [x] I work here
* [x] Project still compiles
## Summary of the Pull Request
We don't want it acting as the "most recent window" for windowing behavior.
The most recent window should always be some other window.
This is being made as an atomic commit because we're probably 50% sure on this
one. Maybe people do want new tabs to open up in the quake window! If they're
running from the commandline, that's easy. If they're running from the shell
context menu, that's **H**ard / impossible currently. $20 someone asks for
that if we ship this. That of course might just fall into "explorer context
menu settings" though.
## References
* Original thread: #653
* Spec: #9274
* megathread: #8888
## PR Checklist
* [x] Checks a box in #8888
* [x] closes https://github.com/microsoft/terminal/projects/5#card-59030791
* [x] I work here
* [x] Tests added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I mean, this one's super straightforward, not sure what else there is to add.
## Validation Steps Performed
Played with this, it works exactly as you'd think.
When we encounter clipboard input that cannot be mapped to a keyboard
key, we try our best to map it to an event. If if is an alphanumeric
character or a wide glyph (per the old width algorithm), we will pass it
through as the UnicodeChar of a key event. If it's *not* wide and *not*
alphanumeric, we will synthesize a set of Alt+NumPad events.
Those events comprise a set containing...
1. Alt Down (modifiers = LAlt, UnicodeChar = 0)
2. Numpad 0 Down/Up (modifiers = LAlt, UnicodeChar = 0)
3. Numpad 1 Down/Up (modifiers = LAlt, UnicodeChar = 0)
4. Numpad 2 Down/Up (modifiers = LAlt, UnicodeChar = 0)
5. Alt Up (modifiers = 0, UnicodeChar = [THE CHARACTER])
Because of event group 5, application developers seem to have taken a
dependency on receiving Alt Up + Character and don't seek to recompose
the original character from its numpad representation.
In pull request GH-8035 (!5394370), we stripped the old width algorithm
out and replaced it with a lookup table (finally!). Unfortunately, that
broke clipboard input for Chinese text as it was no longer considered
"Wide" for the purposes of detecting whether we should use numpad
events.
This commit introduces a version of GetQuickCharWidth that fulfills the
exact contract CharToKeyEvents needs, and doesn't answer for a codepoint
more. We'll use it in Windows to fix MSFT-32901370.
The Terminal analogue of this bug, GH-9052, is fixed by *never emitting
numpad events again.* We think this is okay because it looks like nobody
was ever handling numpad events... and that we were only using them as a
way to communicate within conhost (which we're *also* not using) and any
public exposition of event 5 as a contract was unintended.
VALIDATION
----------
I took this new implementation (with an early return) and the old
implementation and compared whether they would yield a numpad event or a
key event over the entire supported codepoint space [0000..FFFF].
They matched.
Fixes MSFT-32901370
Fixes GH-9052
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 224751bbb061f5f59d794c2c9bdac5a9674ebde6
## Summary of the Pull Request
Brace yourselves, it's finally here. This PR does the dirty work of splitting the monolithic `TermControl` into three components. These components are:
* `ControlCore`: This encapsulates the `Terminal` instance, the `DxEngine` and `Renderer`, and the `Connection`. This is intended to everything that someone might need to stand up a terminal instance in a control, but without any regard for how the UX works.
* `ControlInteractivity`: This is a wrapper for the `ControlCore`, which holds the logic for things like double-click, right click copy/paste, selection, etc. This is intended to be a UI framework-independent abstraction. The methods this layer exposes can be called the same from both the WinUI TermControl and the WPF control.
* `TermControl`: This is the UWP control. It's got a Core and Interactivity inside it, which it uses for the actual logic of the terminal itself. TermControl's main responsibility is now
By splitting into smaller pieces, it will enable us to
* write unit tests for the `Core` and `Interactivity` bits, which we desparately need
* Combine `ControlCore` and `ControlInteractivity` in an out-of-proc core process in the future, to enable tab tearout.
However, we're not doing that work quite yet. There's still lots of work to be done to enable that, thought this is likely the biggest portion.
Ideally, this would just be methods moved wholesale from one file to another. Unfortunately, there are a bunch of cases where that didn't work as well as expected. Especially when trying to better enforce the boundary between the classes.
We've got a couple tests here that I've added. These are partially examples, and partially things I ran into while implementing this. A bunch of things from #7001 can go in now that we have this.
This PR is gonna be a huge pain to review - 38 files with 3,730 additions and 1,661 deletions is nothing to scoff at. It will also conflict 100% with anything that's targeting `TermControl`. I'm hoping we can review this over the course of the next week and just be done with it, and leave plenty of runway for 1.9 bugs in post.
## References
* In pursuit of #1256
* Proc Model: #5000
* https://github.com/microsoft/terminal/projects/5
## PR Checklist
* [x] Closes#6842
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760249
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50760258
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* I don't love the names `ControlCore` and `ControlInteractivity`. Open to other names.
* I added a `ICoreState` interface for "properties that come from the `ControlCore`, but consumers of the `TermControl` need to know". In the future, these will all need to be handled specially, because they might involve an RPC call to retrieve the info from the core (or cache it) in the window process.
* I've added more `EventArgs` to make more events proper `TypedEvent`s.
* I've changed how the TerminalApp layer requests updated TaskbarProgress state. It doesn't need to pump TermControl to raise a new event anymore.
* ~~Something that snuck into this branch in the very long history is the switch to `DCompositionCreateSurfaceHandle` for the `DxEngine`. @miniksa wrote this originally in 30b8335, I'm just finally committing it here. We'll need that in the future for the out-of-proc stuff.~~
* I reverted this in c113b65d9. We can revert _that_ commit when we want to come back to it.
* I've changed the acrylic handler a decent amount. But added tests!
* All the `ThrottledFunc` things are left in `TermControl`. Some might be able to move down into core/interactivity, but once we figure out how to use a different kind of Dispatcher (because a UI thread won't necessarily exist for those components).
* I've undoubtably messed up the merging of the locking around the appearance config stuff recently
## Validation Steps Performed
I've got a rolling list in https://github.com/microsoft/terminal/issues/6842#issuecomment-810990460 that I'm updating as I go.
## Summary of the Pull Request
This PR adds some special behavior to the window named "\_quake".
* When creating the quake window, it ignores "initialRows" and "initialCols" and opens on the top half of the monitor.
- It uses `initialPosition` to determine which monitor this is
* It cannot be moved
* It can only be vertically resized on the bottom border.
* It's always in focus mode.
- We should probably have an issue tracking "Allow showing tabs in focus mode"? Maybe?
- This one element is maybe the one I'm least attached to
When renaming a window to "\_quake", it adopts all those behaviors as well. It does not exit focus mode when leaving QM, nor does it resize back. That seemed unnecessary.
## References
* As spec'ed in #9274
* See also #8888
## PR Checklist
* [x] In the pursuit of #653
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated, but I'm not gonna do any of that till quake mode is totally done.
## Detailed Description of the Pull Request / Additional comments
Note that this doesn't do things like:
* dropdown
* global hotkey summon
* summon to the current monitor
* summon to the current desktop
I'm doing #653 _very_ piecemeal, to try and make the PRs less egregious.
## Validation Steps Performed
* validated that center on launch still works
* validated that QM works on different monitors based on `initialPosition`
* validated entering/exiting QM behaves as expected
## TODO!
* [ ] When snapping the quake window between desktops with <kbd>win+shift+arrow</kbd>, the window doesn't horizontally re-size to the new monitor dimensions. It should.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9706
* [x] CLA signed.
* [ ] Tests added/passed
* [x] Documentation updated here: https://github.com/MicrosoftDocs/terminal/pull/313
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Added global flag named `trimBlockSelection` set to `false` by default.
The setting was added to Interactions menu of the SUI.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8374
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
The majority of the work was already done earlier.
The fix is only in _SetFocusedTab, that runs asynchronously
and thus might result in a race or even overflow.
All other changes are decorative.
## Validation Steps Performed
UT and manual tests
I added a `RenameSucceededText` property to the `TerminalPage` which returns the
formatted message `Successfully renamed window to "{WindowNameForDisplay()}"`
This _doesn't_ pop the dialog when you `wt -w foo` for the first time. Only
_subsequent_ renames.
## References
* Added in #9662
* Closes#9804
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/653-quake-mode/doc/specs/%23653%20-%20Quake%20Mode/%23653%20-%20Quake%20Mode.md) ⇐
## Summary of the Pull Request
After reading through 114+ comments in #653 and related issues, I think I've finally wrapped my head around all the possible scenarios for quake mode. <!-- Speak now or forever hold your peace. --> This also includes "minimize to tray", because the two are a powerful combination. With the work already prototyped in [`dev/migrie/f/653-QUAKE-MODE`](https://github.com/microsoft/terminal/tree/dev/migrie/f/653-QUAKE-MODE), [I'm starting to believe](https://j.gifs.com/58vKNx.gif) that we could actually land this in 2.0.
### Abstract
> Many existing terminals support a feature whereby a user can press a keybinding
> anywhere in the OS, and summon their terminal application. Oftentimes the act of
> summoning this window is accompanied by a "dropdown" animation, where the window
> slides in to view from the top of the screen. This global summon action is often
> referred to as "quake mode", a reference to the videogame Quake who's console
> slid in from the top.
>
> This spec addresses both of the following two issues:
> * "Quake Mode" ([#653])
> * "Minimize to tray" ([#5727])
## PR Checklist
* [x] Specs: #653, #5727
* [x] References: #5000, #4472, #2227, #7240, #8135
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
When we resize the text buffer, initialize the buffer with the
_default_¹ attributes, not the _current_ ones. If we use the current
attributes, then we can get into scenarios where something like `vim` is
running, and left the attributes set to something other than the
defaults, and when we resized the buffer, we'd fill it up with color, as
opposed to whatever the default would be.
This PR instead initializes the buffers with the default colors. It also
makes sure to set the active attributes of the newly created buffers
back to whatever the current attributes of the old buffer were.
[1]: For the Terminal, the default attributes are "default on default".
For conhost, the default attributes are whatever the result of
`Settings::GetDefaultAttributes` is, which could be any combo of the
legacy indices and the default color.
## PR Checklist
* [x] Closes#3848
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
## Summary of the Pull Request
Allow schemes to be previewed as the user hovers over them in the Command Palette.
## References
* Branched off of #8392, which is why the commit history is so polluted. 330a8e8 : 544b2fd has the interesting commits
* #5400: cmdpal megathread
### Potential follow-ups
* changing the font size
* changing the font face
* changing the opacity of acrylic
## PR Checklist
* [x] Closes#6689, a last straggling FHL PR
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated - I don't think so
## Detailed Description of the Pull Request / Additional comments
This works by inserting a "preview" `TerminalSettings` into the settings hierarchy, before the `TermControl`'s runtime settings, and after the ones from the actual `CascadiaSettings`. This allows us to modify that preview settings object, then discard it when we're done with the preview.
This could also be used for other settings in the future - I built it to be extensible to other `ShortcutAction`s, though I haven't implemented those yet.
## Validation Steps Performed
* Select a colorscheme - it becomes the active one
* `colortool -x <scheme>` after selecting a scheme - colortool overrides the selected scheme
* Select a colorscheme after a `colortool -x <scheme>` after selecting a scheme - the scheme in the palette becomes the active one
* Pressing <kbd>esc</kbd> at any point to dismiss the command palette - scheme returns to the previous one
* reloading the settings - returns to the scheme in the settings
* Improved the clarity of the extra step involving
generation of a clang-format.exe when using VisualStudio
* Added Get-Format function to OpenConsole.psm1 and
updated the documentation accordingly.
Closes#9777.
## Summary of the Pull Request
Remove an unnecessary check in `Profiles.cpp` that was preventing us from enabling the text box and browse button when the user unchecks 'use parent process directory'
## PR Checklist
* [x] Closes#9847
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Validation Steps Performed
Played around with it and it works.
## Summary of the Pull Request
Add the "Close other tabs"/"Close tabs to the right" menu items straight to the tab context menu to work around #8238.
We can't add them into a dedicated sub-menu until the upstream crash is fixed.
## References
#8238
## PR Checklist
* [X] Closes#8238
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
Moved the creation of the close menu items to a single function. Once the originating crash is fixed, the sub-menu can be restored by just replacing a few lines of code.
## Validation Steps Performed
There is a bug in the compiler that we trip over when we handle the
exception generated by Package::Current inside a coroutine. It appears
to destruct an invalid instance of winrt::factory_guard_count.
Learned from the compiler folks: "coroutine frame pointer wasn't being
stored ... properly".
Fixes#9821
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
CONTRIBUTING.md currently has documentation suggesting to file a 'Community Guidance Request' if a user doesn't know how to do something. This issue was identified by @hessedoneen in #9765 . Per @zadjii-msft this option has never really existed, and should be struck from CONTRIBUTING.md . This PR does just that.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9765
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Review CONTRIBUTING.md and see that it no longer refers to filing 'Community Guidance Requests'
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9836
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
Not sure what is the reason for handling right button.
But delaying it to PointerReleased seems not to regress anything.
## Summary of the Pull Request
The "virtual bottom" marks the last line of the mutable viewport area, which is the part of the buffer that VT sequences can write to. This region should typically only move downwards, as new lines are added to the buffer, but there were a number of cases where it was incorrectly being moved up. This PR attempts to fix that.
## PR Checklist
* [x] Closes#9754
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #9754
## Detailed Description of the Pull Request / Additional comments
When a call is made to `UpdateBottom`, we now clamp the value so it's at least as low as the current viewport bottom (i.e. if the viewport has moved down, we want the virtual bottom to move down too), but no lower than the bottom of the buffer (we don't want it to be out of range).
There is one special case where we do actually want the virtual bottom to move up - when the scrollback has been cleared with an `ED3` escape sequence. So in that case we needed a new `ConGetSet` API (`ResetBottom`) to reset the virtual bottom to the top of the buffer (essentially one less than the viewport height, since the virtual bottom points to the last line of the viewport).
## Validation Steps Performed
I had to reset the virtual bottom manually in some parts of the `ScreenBufferTests`, since some of the tests were relying on the virtual bottom being automatically reset when the viewport was reset, which is no longer the case.
I've also added a new test to verify that the virtual bottom doesn't move upwards if an update is triggered while the visible viewport is scrolled up. This essentially reproduces the test case from issue #9754, which I've also manually confirmed is fixed.
Add flag that will ensure we do not handoff to a registered default console. Also for a bonus, allow double-click launches or explicit command line launches of conhost.exe with a binary argument to open with the inbox one.
## PR Checklist
* [x] Closes#9791
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* [x] Automated tests for parsing
* [x] Enable defapp, double click conhost.exe, opens as itself
* [x] Enable defapp, run conhost.exe runbox, opens as itself
* [x] Enable defapp, run conhost.exe powershell.exe runbox, opens as itself
* [x] Runbox cmd.exe/pwsh.exe trigger defapp handoff to Terminal
* [x] Shortcut to cmd.exe/pwsh.exe trigger defapp handoff to Terminal
* [x] Use CHOP tool to launch conhost with a server handle triggers handoff to Terminal
* [x] Use CHOP tool to launch conhost with a server handle and -ForceNoHandoff opens as itself
## Summary of the Pull Request
Does what it says on the can. People can now use `win` in a keybinding to
indicate that the chord needs <kbd>win</kbd>.
## References
* Done for #653
* See also #8888
## PR Checklist
* [x] Closes#3184
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
For the record, I hate this. But it's great for quake mode, so _meh_. There's
shockingly more win keys claimed then you think - many more than the shortcut
guide even shows.
* `win+b`: Focus the tray?
* `win+t`: Focus the taskbar
* `win+p`: Project...
* `win+c`: The powertoys color picker
* `win+v`: cloud clipboard
So the list of valid combos is vanishingly small. It's all about that <kbd>win+~</kbd>
## Validation Steps Performed
Bound
```json
{ "keys": [ "win+`" ], "command": "commandPalette" },
```
and yea, it works as expected
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9714
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Attempts to generate a name Profile X, where X is the index of the new profile (1-based).
As long as name is already taken, generates new name by incrementing X by 1
## Summary of the Pull Request
Clearly, I didn't run these tests on my last commit where I made the toasts lazy-load.
## References
* broken in in #9662
*
## PR Checklist
* [x] Closes#9769
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
For whatever reason, these tests are unhappy running back to back, but are just fine running isolated.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9776
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Use `ThrottledFunc` in `TermControl` to limit bell emission callback to one per second.
Add names to threads to make debugging a slight bit easier.
## PR Checklist
* [x] Closes personal todo item.
* [x] I work here.
* [x] Tested manually.
## Detailed Description of the Pull Request / Additional comments
Thread descriptions show up as names in both the Visual Studio debugger, WinDBG debugger, and Windows Performance Analyzer. This makes it faster and easier to identify threads of interest in our processes.
## Validation Steps Performed
* [x] Checked threads were named in OpenConsole.exe running in classic conhost window mode under VS debug
* [x] Checked threads were named in OpenConsole.exe running in conpty mode under VS debug
* [x] Checked threads were named in WindowsTerminal.exe (for a few of the threads around connections)
* [x] Checked that we could also see it in WinDBG
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This change cleans up the Fullscreen implementation for both conhost and Terminal, improving the restore position (where the window goes when exiting fullscreen).
Prior to this change the window wasn't guaranteed to restore somewhere on the window's current monitor when exiting fullscreen. With this change the window will restore always to its current monitor, at a reasonable location (and will 'double restore' (to fullscreen->maximize->restore) after monitor changes while fullscreen, which is the expected user behavior.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9746
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
A fullscreen window's monitor can change.
- Win+Shift+left/right migrates a window between monitors.
- User could open settings, display, and move the monitor or change its DPI.
- The monitor could be unplugged.
- The session could be remote and be disconnected.
A fullscreen window stores a 'restore position' when entering fullscreen, used to move the window back 'where it was'. BUT, its unexpected for the window to exit fullscreen and jump to another monitor. This means its previous position must be migrated from the old monitor's work area to the new monitor's work area.
If a window is maximized, it is sized to the work area. Like with fullscreen, a maximized window has a 'restore position', though unlike with fullscreen the restore position for maximized is stored by the system itself. Migration in cases where a maximized (or fullscreen) window's monitor changes is also taken care of by the system. To restore 'safely' to maximized (after changing window styles) a window must only `SetWindowPos(SWP_FRAMECHANGED)`. While technically a maximized window that becomes fullscreen 'is still maximized' (from Win32's perspective), its prudent to also `ShowWindow(SW_MAXIMIZED)` prior to `SWP_FRAMECHANGED` (to explicitly make the window maximized).
If not restoring to maximized, the restore position is adjusted by the new/ old work area. Additionally, the new/ old window DPI is used to adjust the size of the window by the DPI change (keeping the window's logical size the same).
- The work area origin is checked first (shifting window rect by the change in origin)
- The DPI is checked next, changing right/ bottom (size only)
- Each edge of the window is compared against the corresponding edge of the work area, nudging the window back on-screen if hanging offscreen. By shifting right before left, bottom before top, the top-left is guaranteed on-screen.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tried it out. Seemed to work on my machine.
Jk, ran conhost/ terminal on mixed DPI system, max (or not), fullscreen, win+shift+left/ exit fullscreen/ maximize. Monitor unplug, etc.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9787
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Validation Steps Performed
* [x] single click = no selection
* [x] single click and drag = selection starting from first point
* [x] single click in unfocused pane and drag = focus pane, selection starting from first point
* [x] double-click = selects a whole word
* [x] triple-click = selects a whole line
* [x] double-click and drag = selects a whole word, drag selects whole words
* [x] triple-click and drag = selects a whole line, drag selects whole lines
* [x] Shift single-click = defines start point
* [x] second Shift single-click = defines end point
* [x] Shift double-click = selects entire word
* [x] Shift triple-click = selects entire line
* [x] Shift double-click and drag = selects entire word, drag selects whole words
* [x] Mouse mode: Shift single-click = defines start point
* [x] Mouse mode: second Shift single-click = defines end point
* [x] Mouse mode: Shift double-click = selects entire word
* [x] Mouse mode: Shift triple-click = selects entire line
* [x] Mouse mode: Shift double-click and drag = selects entire word, drag selects whole words
* [x] With existing selection: single-click outside the selection and drag = establishes a new selection starting from the click point
* [x] Click-drag to set selection, shift-click-drag outside of selection = extend selection while dragging
This is required to maintain the modality of the dialogs, which we lost
when we moved from Pickers to IFileDialog. The HWND hosting Window API
we dreamed up is incompatible with IModalDialog, because IModalDialog
requires the HWND immediately upon `Show`. We're smuggling it in a
uint64, as is tradition.
zadjii-msft noticed this in #9760.
This PR removes the `GetConsoleCursorInfo` and `SetConsoleCursorInfo`
methods from the `ConGetSet` interface, and the `GetScrollingRegion`
method from the `SCREEN_INFORMATION` class. None of these methods are
used anymore.
PR #2764 removed the last usage of `GetScrollingRegion`.
The `Get/SetConsoleCursorInfo` methods don't seem to have ever been used
in the time that the terminal code has been open source, so whatever
purpose they originally served must have been replaced a long time ago.
The `GetScrollingRegion` method was originally called from the
`ScrollRegion` function, but that usage was removed in PR #2764 when the
margin handling was moved to a higher level.
I've checked that the code still compiles.
Closes#9771
"ctrl+numpad_plus" command now increases font size and
"ctrl+numpad_minus" command now decreases font size.
Before this only "ctrl+=" and "ctrl+-" controlled font size. Increase in
font size follows previous convention where zooms in arbitrarily large,
but decrease in font size is capped.
## Validation Steps Performed
I first ran "ctrl+=" and "ctrl+-" in my terminal to verify its behavior,
then compared that against "ctrl+numpad_plus" and "ctrl+"numpad_minus".
Both increased and decreased the font size by the same amount, and both
appeared to have a cap for how small they could get, but did not appear
to have a cap for how big they could get.
Closes#7518
The red close button animation fades to gray then to transparent, when
standard behavior skips the gray part. I manually tested in light/dark/high
contrast mode.
Closes#9762
Using Pickers from an elevated application yields an
ERROR_ACCESS_DENIED. Of course it does: it was designed for the modern
app platform.
Using the common dialog infrastructure has some downsides¹, but it
doesn't crash and is just as flexible.
I've added some fun templated functions that help us with the
complexity.
Fixes#8957
¹You've got to use raw COM, and it runs in-proc instead of out-of-proc.
## Validation Steps Performed
I tested every picker.
It will be a different color than the background, so it will look less
weird when it's unfocused. It also fixes the bug where the navigation
menu is transparent when acrylic is disabled systemwide.
Fixes#9337
This pull request adds an appearance configuration object to our
settings model and app lib, allowing the control to be rendered
differently depending on its state, and then uses it to add support for
an "unfocused" appearance that the terminal will use when it's not in
focus.
To accomplish this, we isolated the appearance-related settings from
Profile (into AppearanceConfig) and TerminalSettings (into the
IControlAppearance and ICoreAppearance interfaces). A bunch of work was
done to make inheritance work.
The unfocused appearance inherits from the focused one _for that
profile_. This is important: If you define a
defaults.unfocusedAppearance, it will apply all of defaults' settings to
any leaf profile when a terminal in that profile is out of focus.
Specified in #8345Closes#3062Closes#2316
Reduce instances of font fallback dialog through package font loading,
basic name trimming, and revised fallback test
- Adjusts the font dialog to only show when we attempt last-chance
resolution from our hardcoded list of font names with a flag instead
of with a string comparison by name
- Adds a resolution step to trim the font name by word from the end and
retry to attempt to resolve a proper font that just has a weight
suffix
- Adds a second font collection to font loading that will attempt to
locate all TTF files sitting next to our binary, like in our package
- [x] Wrote my font preference in the JSON as `Cascadia Code Heavy` and
watched it quietly resolve to just `Cascadia Code` without the dialog.
- [x] Put a font that isn't registered with the system into the layout
directory for the package, set it as my desired font in Terminal, and
watched it load just fine.
- [x] Try a font name with different casing and see if dialog doesn't
pop anymore
- [x] Try a font with different (localized) names like ＭＳ ゴシック and
see if dialog doesn't pop anymore
- [x] Check Win7 with WPF target
Closes#9375
This commit fixes two issues:
1. We were pushing ConsoleWaitBlocks into the wait queue before they
were fully constructed. This resulted in the wait being called before
it even had an API message in it. [MSFT-24113101]
2. Drawing DBCS characters and resizing (a lot) would cause a crash
because of an invalid DBCS cell state. This hits in both Terminal and
conhost. [MSFT-17364373] [GH-4907]
The DBCS state check was promoted from an NT_ASSERT (which never fired
in release) to a FAIL_FAST in !1794053. The console kept chugging along
without failing in fre for all those years.
Fixes MSFT-24113101
Fixes MSFT-17364373
Fixes GH-4907 Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 108e746630749aa7851dd813b19e013ae31ef0db
## Summary of the Pull Request
Make sure that the window renamer and other toasts follow the requested app theme. We accomplish this by doing something similar to what we do with ContentDialogs. Since TeachingTips aren't in the same XAML root, we have to traverse the entire tree upwards setting RequestedTheme. If we don't, then we'll update the background color of the TeachingTip, but not the text inside it.
## References
* Added in #9662 and #9523
## PR Checklist
* [x] Closes#9717
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested with system theme light & dark, and `theme` set to `light, dark, and unset, and verified that they worked as expected.
## Summary of the Pull Request
Huh, I guess I missed making the window renamer light-dismissable. This is a oneline fix for that.
Light dismissing is treated as a _cancel_, not as a commit.
## References
* Added in #9662
## PR Checklist
* [x] Closes#9718
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
This feels right.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9725
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Validation Steps Performed
* [x] single click = no selection
* [x] single click and drag = selection starting from first point
* [x] single click in unfocused pane and drag = focus pane, selection starting from first point
* [x] double-click = selects a whole word
* [x] triple-click = selects a whole line
* [x] double-click and drag = selects a whole word, drag selects whole words
* [x] triple-click and drag = selects a whole line, drag selects whole lines
* [x] Shift single-click = defines start point
* [x] second Shift single-click = defines end point
* [x] Shift double-click = selects entire word
* [x] Shift triple-click = selects entire line
* [x] Shift double-click and drag = selects entire word, drag selects whole words
* [x] Mouse mode: Shift single-click = defines start point
* [x] Mouse mode: second Shift single-click = defines end point
* [x] Mouse mode: Shift double-click = selects entire word
* [x] Mouse mode: Shift triple-click = selects entire line
* [x] Mouse mode: Shift double-click and drag = selects entire word, drag selects whole words
* [x] With existing selection: single-click outside the selection and drag = establishes a new selection starting from the click point
## Summary of the Pull Request
In exactly the same fashion as the tab renamer, handle <kbd>Enter</kbd> for committing the rename, and <kbd>Escape</kbd> for dismissing the rename.
## References
* Added in #9662
## PR Checklist
* [x] Closes#9720
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Played with it - this feels good.
## Summary of the Pull Request
ThrottledFunc previously created a DispatcherTimer whose Tick callback holds a strong reference to the DispatcherTimer itself.
This causes a reference cycle, inadvertently leaking timer instances.
## PR Checklist
* [x] Closes#7710
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
I've initially wanted to remove the `ThrottledFunc<>` optimization, but it turns out that this causes a 3% slowdown. That's definitely not a lot, but enough that we can just keep the optimization for the time being.
I've moved the implementation from the .cpp file into the header regardless since the two implementations are extremely similar and it's easier that way to keep them in line.
## Validation Steps Performed
I've ensured that the scrollbar still updates its length when I add new lines to a newly created tab.
Does what it says on the can.
This is a follow up to #9472. Now that we have a control .lib, we can add tests for it.
Unfortunately, the `TermControl` itself is a horrible mess. So this new unittest lib is empty for now. I'm working on actual tests as a part of #6842, but this PR is here to keep the diffs smaller.
Also, apparently `server.vcxproj` had the wrong GUID in it.
* [x] I work here
* [x] Adds tests
## Summary of the Pull Request
This PR adds support for renaming windows.
It does so through two new actions:
* `renameWindow` takes a `name` parameter, and attempts to set the window's name
to the provided name. This is useful if you always want to hit <kbd>F3</kbd>
and rename a window to "foo" (READ: probably not that useful)
* `openWindowRenamer` is more interesting: it opens a `TeachingTip` with a
`TextBox`. When the user hits Ok, it'll request a rename for the provided
value. This lets the user pick a new name for the window at runtime.
In both cases, if there's already a window with that name, then the monarch will
reject the rename, and pop a `Toast` in the window informing the user that the
rename failed. Nifty!
## References
* Builds on the toasts from #9523
* #5000 - process model megathread
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-50771747
* [x] I work here
* [x] Tests addded (and pass with the help of #9660)
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I'm sending this PR while finishing up the tests. I figured I'll have time to sneak them in before I get the necessary reviews.
> PAIN: We can't immediately focus the textbox in the TeachingTip. It's
> not technically focusable until it is opened. However, it doesn't
> provide an even tto tell us when it is opened. That's tracked in
> microsoft/microsoft-ui-xaml#1607. So for now, the user _needs_ to
> click on the text box manually.
> We're also not using a ContentDialog for this, because in Xaml
> Islands a text box in a ContentDialog won't recieve _any_ keypresses.
> Fun!
## Validation Steps Performed
I've been playing with
```json
{ "keys": "f1", "command": "identifyWindow" },
{ "keys": "f2", "command": "identifyWindows" },
{ "keys": "f3", "command": "openWindowRenamer" },
{ "keys": "f4", "command": { "action": "renameWindow", "name": "foo" } },
{ "keys": "f5", "command": { "action": "renameWindow", "name": "bar" } },
```
and they seem to work as expected
This commit introduces support for inverting all types of cursor.
To invert the display without re-rendering any text, we draw the cursor
into a command list and then compose the command list with the existing
renderer using the MASK_INVERT composition flag.
This wouldn't normally work with our renderer because there is no
_background_ color to invert in some cases (such as when acrylic is in
use.)
To work around that, we're taking advantage of @zadjii-msft's two-pass
cursor renderer.
To properly invert the cursor over a transparent background:
(Examples are given below for two cursor types, but this applies to all
of them.)
First, we'll draw a "backplate" in the user's requested background color
(with the alpha channel set to 0xFF). (`firstPass` == true)
EMPTY BOX FILLED BOX
===== =====
= = =====
= = =====
= = =====
===== =====
Second, the glyph is drawn (outside of the cursor renderer).
EMPTY BOX FILLED BOX
==A== ==A==
=A A= =A=A=
AAAAA AAAAA
A A A===A
A===A A===A
Last, we'll draw the cursor again in all white and use that as the
*mask* for inverting the already-drawn pixels. (`firstPass` == false) (#
= mask, a = inverted A)
EMPTY BOX FILLED BOX
##a## ##a##
#A A# #a#a#
aAAAa aaaaa
a a a###a
a###a a###a
Related to #9610
## Validation Steps Performed
Manual visual validation in all configurations.
**Summary of the Pull Request**
This PR adds an X Macro for defining our ShortcutActions. This means that you can add the action in one place, and have the macro synthesize all sorts of boilerplate for you!
From the `AllShortcutActions.h` file:
> For a clearer explanation of how this file should be used, see:
> https://en.wikipedia.org/wiki/X_Macro
>
> Include this file to be able to quickly define some code in the exact same
> way for _every single shortcut action_. To use:
>
> 1. Include this file
> 2. Define the ON_ALL_ACTIONS macro with what you want each action to show up
> as. Ex:
>
> #define ON_ALL_ACTIONS(action) void action##Handler();
>
> 3. Then, use the ALL_SHORTCUT_ACTIONS macro to get the ON_ALL_ACTIONS marcro
> repeated once for every ShortcutAction
>
> This is used in KeyMapping.idl, ShortcutAction.*, TerminalPage.*, etc. to
> reduce the number of places where we must copy-paste boiler-plate code for
> each action. This is _NOT_ something that should be used when any individual
> case should be customized.
**PR Checklist**
* [x] Scratches an itch
* [x] I work here
* [x] Tests passed
* [n/a] Requires documentation to be updated
**Detailed Description of the Pull Request / Additional comments**
Originally I had this blocked as a follow up to #9662. However, I've grown tired after a month of merging main into this branch, and I'm just shipping it separately. It will inevitably conflict with anyone who has actions in flight currently.
**Validation Steps Performed**
The code still builds exactly as before!
Broadly, the tests were broken by #7489 because there were no `_startupActions`. They relied on the removed codepath that assumed `wt.exe` always set actions, or `AppCommandlineArgs::ValidateStartupCommands` created one by default.
* [x] fixes#9659
* [x] I work here
* [x] the tests pass again
This pull request introduces Microsoft.Terminal.Core.Color as an
alternative to both Windows.UI.Color and uint32_t/COLORREF in the
TerminalCore, ...Control, ...SettingsModel and ...SettingsEditor layers.
M.T.C.Color is trivially convertible to/from til::color and therefore
to/from COLORREF, W.U.Color, and any other color representation we might
need².
I've replaced almost every use of W.U.Color and uint32_t-as-color in the
above layers, with minor exception¹.
The need for this work is twofold.
First: We cannot bear a dependency from TerminalCore (which should,
on paper, be Windows 7 compatible) on Windows.UI or any other WinRT
namespace.
This work removes one big dependency on Windows.UI, but it does not go
all the way.
Second: TerminalCore chose to communicate mostly in packed uint32s
(COLORREF), which was inherently lossy and dangerous.
¹ The UI layers (TerminalControl, TerminalApp) still use
Windows.UI.Color as they are intimately connected to the UWP XAML UI.
² In the future, we might even be able to *use* the alpha channel...
## PR Checklist
* [x] I ran into the need for this when I introduced cursor inversion
* [X] Fixes a longstanding itch
## Validation Steps Performed
Built and ran all tests for the impacted layers, even the local ones!
## Summary of the Pull Request
This is a follow up to #9300. Now that we have names on our windows, it would be nice to see who is named what. So this adds two actions:
* `identifyWindow`: This action will pop up a little toast (#8592) displaying the name and ID of the window, and is bound by default.
* `identifyWindows`: This action will request that ALL windows pop up that toast. This is meant to feel like the "Identify" button on the Windows display settings. However, sometimes, it's wonky.
That's being tracked upstream on https://github.com/microsoft/microsoft-ui-xaml/issues/4382
Because it's so wonky, we won't bind that by default. Maybe if we get that fixed, then we'll change the default binding from `identifyWindow` to `identifyWindows`
## References
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/projects/5#card-51431492
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
You may note that there are some macros to make interacting with lots and lots of actions easier. There's a lot of boilerplate whenever you need to make a new action, so I thought: "Can we make that easier?"
Turns out you can make it a _LOT_ easier, but that work is still behind another PR after this one. Get excited
## Summary of the Pull Request
Currently, both when the tab is already closed, and when there is a
request to close a tab (might be rejected), we go through the same flow
in TerminalPage.
This might leave the system in inconsistent state, as the side-effects
of closing will persist even if the closing was aborted.
This PR separates between the two flows, by introducing a CloseRequested
event to the TabBase.
This event is used to inform the upper tier (the terminal page) about
the request and to trigger the same logic that happens when the tab is
closed directly from the terminal page (e.g., by clicking close on the
tab view).
The Closed event will be used only to handle the actual closing of the
tab. It will ensure that the tab gets removed from the terminal page if
required.
As a result, it a read-only pane will be closed non-interactively (aka
connection exits), the tab closed flow will be invoked, and no user
prompt will be shown.
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9572
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
Removes base layer (aka profiles.defaults) from the Settings UI. `SettingContainer` was also updated to not present a revert arrow when overriding a base layer value.
The new experience is now as follows:
- The revert arrow will only appear if you are overriding a value from a fragment extension.
- Users are still able to fully interact with `profiles.defaults` in their settings.json. Doing so still propagates those changes to their profiles as normal. In this case, the Settings UI presents the base layer value as the one that you selected.
#6800 - Settings UI Epic
Closes#9539
Change TAEF nuget package to use new Microsoft.Taef name; Update to 10.58 release build version.
## PR Checklist
* [x] Closes email from Phil letting us know TAEF has a new release build and a rename.
* [x] Closes annoying duplicate TAEF import warning in `Parser.UnitTests.vcxproj`
* [x] I work here.
* [ ] Need to see the tests run off CI to confirm this is fine for those environments and Helix
## Validation Steps Performed
* [x] Build/run tests locally
* [ ] Build/run unit and feature tests in CI
* [ ] Build/run Helix-lab tests in CI
This adds [`XamlStyler.Console`] to our solution, and calls it when we
format the code, to also format
our .xaml files.
* `XamlStyler.Console` is a dotnet tool so it needs to be restored with
`dotnet tool restore`
* I've added a set of rules to approximately follow [@cmaneu's XAML guidelines].
Those guidelines also recommend things based on the code-behind, which
this tool can't figure out, but also _don't matter that much_.
* There's an extra step to strip BOMs from the output, since Xaml Styler
adds a BOM by default. Some had them before and others didn't. BOMs
have been nothing but trouble though.
[`XamlStyler.Console`]: https://github.com/Xavalon/XamlStyler
[@cmaneu's XAML guidelines]: https://github.com/cmaneu/xaml-coding-guidelines
By default from ARM64 architecture projects, `WIN32` is not defined. It
is supposed to be for this proxy stub to work. So I've set it with the
preprocessor for this project.
## PR Checklist
* [x] Closes release build failure after #7489
* [x] I work here.
* [x] Built on my machine.
## Detailed Description of the Pull Request / Additional comments
`WIN32` appears to convey two meanings depending on who you are:
- To most of Windows, `WIN32` appears to mean the Win32 API surface and
sometimes the major OS version that goes with it. (Specifically in
contrast to 16-bit Windows.)
- To others, `WIN32` appears to mean a 32-bit processor or a synonym of
`x86`.
This is generally not a problem for a few reasons:
- VS defines `WIN32` in the default targets/props only for the `x86`
processor type. **BUT**
- Windows defines `WIN32` if it's not already defined in both
`minwinbase.h` and `ole2.h` which generally speaking manage to get
compiled into practically everything especially since `minwinbase.h`
tends to sneak itself in somehow through `windows.h` and that's
**THE** include to use the Windows API surface.
- Windows also defines `WIN32` for itself unconditionally and relatively
globally when building itself.
However, it's a problem here because:
- `rpcproxy.h` is the only header included in `dlldata.c`, a file
generated automatically by `midl.exe` in the SDK when making a proxy
stub.
- `rpcproxy.h` only defines its contents for a proxy when `WIN32` or
`_M_AMD64` are found.
- Therefore, it's defined pretty naturally for x86 and AMD64 targets
from VS, but not for ARM64.
- ARM64 support is pretty new and those who are attempting to build for
ARM64 and against the public SDK with Visual Studio for a classic COM
proxy... seems like a relatively unlikely combination.
I will follow up with the Visual Studio, Windows SDK, and MIDL/COM teams
to try to remove this pitfall from the public tooling. But for now, this
is the fix.
This is entirely self-serving. In my go-to config, I like having some of
the panes for a given profile in a different color scheme. This will let
a user pass `--colorScheme <scheme name>` to manually override the
scheme for that profile. Neat!
I think we can all agree that `TerminalPage.cpp` is an unruly beast of a
file. It's got everything. It does everything. It can sometimes be a bit
hard to work with, because of simply how big it is. This PR tries to
alleviate this by making `TerminalPage.cpp` just a little smaller. It
does so by moving pretty much everything related to tab management into
its own file, `TabManagement.cpp`. These methods that have moved are all
the same as they were before, and they're still members of
`TerminalPage`. But now they're all in one place.
I tried to move all the references to `_tabs` in `TerminalPage.cpp`, but
there's still a few that I left behind. Mostly because I felt that
moving those would be too gnarly a code change for an otherwise simple
cut&paste PR.
There are a few new methods I introduced:
* `_TabDragStarted` and `_TabDragCompleted`: These were lambdas before,
promoted to full methods.
* `_DismissTabContextMenus`: Remove all the right-click context menus
from the tabs
* `_FocusCurrentTab`: This one's a bit trickier, we were actually doing
this in a few different places, so I tried consolidating.
* `_HasMultipleTabs`: This doesn't need explaining.
* `_RemoveAllTabs`: Really, just encapsulation for the sake of removing
a `_tabs` from `TerminalPage.cpp`
* `_ResizeTabContent`: Really, just encapsulation for the sake of
removing a `_tabs` from `TerminalPage.cpp`
In the future, some enterprising young soul could try promoting that
file to its own class, and hiding `_tabs` (and `_mruTabs`) inside it.
Probably would need to take a reference to TerminalPage's `_tabView` and
`_newTabButton`. I'm not doing that right now, because I already hate
the idea of the ...
> 920 additions and 847 deletions.
... I'm making you look at already.
## Other thoughts
Some of the calls might be a little arbitrary - `_OpenNewTab` and
`_CreateNewTabFromSettings` probably should stay in `TerminalPage`? Or
at least elements of those might need to get split up better. Similarly
`TerminalPage::_OpenSettingsUI` stayed in `TerminalPage.cpp`, but it
does a lot of the same work as `_CreateNewTabFromSettings`. I'm not
saying this is the definitive places for these methods - it's code we're
working with, not stone ☺️
Building code merged with `main` this morning, and I hit a error where
the `TerminalConnection` project needed `ITerminalHandoff` something or
other, but that hadn't been built yet. I suspect that's because the
`OpenConsoleProxy` project needs to be built first, but it isn't set as
a dependency.
I suspect once that project is built once, this isn't ever an issue, but
I hadn't done that yet.
This fixed the build for me locally.
* [x] fixes local dev builds
* [x] also updates the name of the TerminalControl project in the .sln,
because apparently VS didn't like that.
This commit introduces a new build configuration, "Fuzzing", which
enables the new address sanitizer (shipped in VS 16.9) and code
coverage over the entire solution. Only a small subset of projects
(those comprising original conhost, right now) are selected to build in
this configuration, and even then only in Fuzzing|x64.
It also adds a fuzzing-adapted build of conhost, which makes no server
connections and handles no client applications. To do this, I've
replicated a bit of the console startup routine into fuzzmain.cpp and
made up some fake data. This is the bare minimum required to boot up
Win32 interactivity (or VT interactivity!) and pretend that a process
has connected.
If we don't pretend that a process has connected, "conhost" will exit
immediately. If we don't forge the process list, conhost will exit. If
we can't provide a server handle, we can't provide a "device comm".
Minor changes were necessary to server/host such that they would accept
a preexisting "device comm". We use this new behavior to provide a
"null" one that only hangs up threads and otherwise responds to requests
successfully.
This fuzzing-adapted build links LLVM's libFuzzer, which is an excellent
coverage-based fuzzer that will produce a corpus of inputs that exercise
unique codepaths. Eventually, we can use this to generate known-"good"
inputs for anything.
I've gone ahead and added a fuzz function that yeets bytes directly into
WriteCharsLegacy, which was the original reason I went down this path.
The implementation of LLVMFuzzerTestOneInput should be replaced with
whatever you want to fuzz.
We have been seeing some crashes (#9410) originating from a
use-after-free or a double-free in the renderer. The renderer is
iterating over the dirty rects from the render engine¹ and the rect list
is being freed out from under it.
Things like this are usually the result of somebody manipulating the
renderer's state outside of lock.
Therefore, this pull request introduces some targeted locking fixes
around manipulation of the pattern buffer (which, in turn, changes the
renderer state.)
¹ This was not a problem until #8621, which made the renderer return a
span instead of a copy for the list of dirty rects.
## Validation
I ran Terminal under App Verifier, and introduced a manul delay (under
lock) in the renderer such that the invalid map would definitely have
been invalidated between the renderer taking the lock and the renderer
handling the frame. AppVerif failed us without these locking changes,
and did not do so once they were introduced.
Closes#9410.
- Implements the default application behavior and handoff mechanisms
between console and terminal. The inbox portion is done already. This
adds the ability for our OpenConsole.exe to accept the incoming server
connection from the Windows OS, stand up a PTY session, start the
Windows Terminal as a listener for an incoming connection, and then
send it the incoming PTY connection for it to launch a tab.
- The tab is launched with default settings at the moment.
- You must configure the default application using the `conhost.exe`
propsheet or with the registry keys. Finishing the setting inside
Windows Terminal will be a todo after this is complete. The OS
Settings panel work to surface this setting is a dependency delivered
by another team and you will not see it here.
## Validation Steps Performed
- [x] Manual adjust of registry keys to the delegation conhost/terminal
behavior
- [x] Adjustment of the delegation options with the propsheet
- [x] Launching things from the run box manually and watching them show
in Terminal
- [x] Launching things from shortcuts and watching them show in the
Terminal
Documentation on how it works will be a TODO post completion in #9462
References #7414 - Default Terminal spec
Closes#492
The PlaySound functions were removed from OneCoreUAP_apiset.Lib in Windows 10 SDK 19041 because they did not actually belong there. Link to WinMM.Lib for PlaySoundW.
### Validation Steps Performed
* Built for x64 from repository root with: `MSBuild.exe -property:TargetPlatformVersion=10.0.19041.0`
* Installed CascadiaPackage_0.0.1.0_x64_Debug.msix and launched on 19042.867
There seems to be a bug in WinUI (see microsoft/microsoft-ui-xaml#2121)
that results in heterogeneous `ModernCollectionBasePanel` configured
with `DataTemplateSelector` and virtualization enabled to recycle a
container even if its `ContentTemplate` is wrong.
I considered few options of handling this:
* Disabling virtualization (by replacing item container template with
some non-virtualizing panel (e.g., `StackPanel`,
`VirtualizingStackPanel` with `VirtualizationMode`=`Standard`)
* Replacing `DataTemplateSelector` approach with `ChoosingItemContainer`
event handling approach, which allows you to manage the item container
(`ListViewItem`) allocation process.
I have chosen the last one, as it should limit the amount of
allocations, and might allow optimizations in the future.
The solution introduces:
* A container for `ListViewItem`s in the form of a map of sets:
* The key of this map is a data template (e.g., `TabItemDataTemplate`)
* The value in the set is the container
* `ChoosingItemContainer` event handler that looks for available item in
the container or creates a new one
* `ContainerContentChanging` event handler that returns the recycled
item to the container
Closes#9288
This commit clarifies some things inside WriteCharsLegacy by adding
comments and renaming parameter and enum names. It does not change any
logic.
`WC_ECHO` was used extensively to mean only one thing: whether to print
a control character like `\x18` (Ctrl+X>) as `^X`. It's been renamed
to make that abundantly clear.
## Summary of the Pull Request
Currently, when the MRU is enabled we lose the keybinding allowing us to
go forward/backward (aka right/left in LTR) in the tab view.
To fix that, this PR introduces "tabSwitcherMode" optional parameter to
the prevTab / nextTab commands.
If it is not provided the global setting will be used.
So if you want to go to adjacent tabs, even if MRU is enabled on the
system level you can use:
```
{ "command": { "action": "prevTab", "tabSwitcherMode": "inOrder" }, "keys": "ctrl+f1"}
{ "command": { "action": "nextTab", "tabSwitcherMode": "inOrder" }, "keys": "ctrl+f2"}
```
or even
```
{"command": { "action": "prevTab", "tabSwitcherMode": "disabled" }, "keys": "ctrl+f1"}
{ "command": { "action": "nextTab", "tabSwitcherMode": "disabled" }, "keys": "ctrl+f2"}
```
if you don't want tab switcher to show up
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9330
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated - not yet. Waiting for approval.
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
This commit introduces a few different announcements to the command
palette.
When you delete the `>`, it will announce that you have entered
"command-line mode". When you reintroduce the `>`, it will announce that
you are in "action search mode."
When you enter a nested command, it will announce that you are looking
at "more options for new tab..." or "more options for select color
scheme...".
When you search and find nothing, it will announce that there were no
matching commands (or tabs!)
Related to #7907.
This reduces by 10% the binary size of OpenConsole x64 Release.
Note | OpenConsole.exe
------ | ---------------------------
Before | 1156096
After | 1037312
Delta | -118784
%Delta | -10.27%
## Summary of the Pull Request
Currently a repeated attempt to close a read-only tab from context menu,
will bring the terminal into invalid state if user dismisses close action.
There are two root causes for this:
1. The tab close menu triggers the closing of the root pane
(rather than invoking close tab flow in the Terminal Page).
2. Currently panes are not aware that the closing was canceled,
and thus they trigger the Closed event, putting the system in a weird state,
where the Closed handlers were invoked, but the Pane remains.
This PR mitigates #9502, by addressing the first root cause
(the fix is trivial and hopefully can be serviced).
Moreover, it addresses the only existing UI flow that can trigger the issue.
The remaining problematic flow will occur when the connection is closed.
I have created a separate Issue to track it:
https://github.com/microsoft/terminal/issues/9572
as I guess the PR for it might be more complex.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9502
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
{fmt} 7.1.3 includes a number of changes, which I will summarize here:
* Switched to Dragonbox for float formatting (quoted, "20-30x faster"
than ostringstream)
* Significantly improves `FMT_COMPILE` (compile-time format string)
Currently dismissing "are you sure you wish to close read-only tab or pane"
dialog by pressing `ESC` will not abort tab closing
(aka the tab will be closed!)
The reason for this, is that we cancel, only if the "Cancel" is pressed
(aka result=PrimaryButton, while ESC returns result=None).
This PR fixes this, by doing what we usually do:
* Putting Cancel in the CloseButton (which is also triggered by ESC)
* Aborting the action if the result is not a Primary Button
However, since we want Cancel to be a default action,
we set CloseButton to be the DefaultButton in XAML
This is a small refactor on my way to much bigger, more painful refactors. This PR does five things:
* `TermControl.*` has historically had all the control-relevant EventArgs defined in the same file as TermControl. That's just added clutter to the files, clutter that could have been in it's own place. We'll move all those event arg to their own files.
* We'll also move `IDirectKeyListener` to its own file while we're at it.
* We'll update some of `TermControl`'s old `DEFINE`/`DECLARE_TYPED_EVENT` macros to the newer `TYPED_EVENT` macro, which is a bit nicer.
* We'll change `TermControl.TitleChanged` to a typed event. I needed that for a future PR, so let's just do it here
* While we're updating `TYPED_EVENT` macros, let's do `TerminalPage` too.
### checklist
* [x] I work here
* [x] This is work for #1256, but we've got a long way to go before that works.
TIL that the `<None Include="Foo.def" />` line in our projects is
actually totally meaningless. The important line is the one that's in
`cppwinrt.build.pre.props`, where we declare
```xml
<ModuleDefinitionFile Condition="Exists('$(ProjectName).def')">$(ProjectName).def</ModuleDefinitionFile>
```
So if you change a project's name, and not the `.def` file, then the
linker will just _not use the `.def` file at all_.
More importantly, this seemingly doesn't matter in debug builds. In a
Debug build, the linker will happily still include `WINRT_CanUnloadNow`
and `WINRT_GetActivationFactory` in the exports from the dll, even
without the `.def`. But in a Release build, the linker is much more
agressive about pruning symbols that aren't referenced, and without
those two, NONE of the symbols are eventually referenced.
This PR fixes `Microsoft.Terminal.Control` by renaming the `.def`, and
makes it marginally harder for someone to make the same mistake in the
future.
## References
* Regressed in #9472
## PR Checklist
* [x] Closes#9529
* [x] I work here
We don't need to use C++/WinRT's component authoring capabilities to be
a COM component. It's easier for us if we're not (and it makes the build
slightly faster!)
Binary size savings (x64 Release):
Note | WindowsTerminalShellExt.dll
------ | ---------------------------
Before | 136192
After | 130048
Delta | 6144
%Delta | 4.5%
**BE NOT AFRAID**. I know that there's 107 files in this PR, but almost
all of it is just find/replacing `TerminalControl` with `Control`.
This is the start of the work to move TermControl into multiple pieces,
for #5000. The PR starts this work by:
* Splits `TerminalControl` into separate lib and dll projects. We'll
want control tests in the future, and for that, we'll need a lib.
* Moves `ICoreSettings` back into the `Microsoft.Terminal.Core`
namespace. We'll have other types in there soon too.
* I could not tell you why this works suddenly. New VS versions? New
cppwinrt version? Maybe we're just better at dealing with mdmerge
bugs these days.
* RENAMES `Microsoft.Terminal.TerminalControl` to
`Microsoft.Terminal.Control`. This touches pretty much every file in
the sln. Sorry about that (not sorry).
An upcoming PR will move much of the logic in TermControl into a new
`ControlCore` class that we'll add in `Microsoft.Terminal.Core`.
`ControlCore` will then be unittest-able in the
`UnitTests_TerminalCore`, which will help prevent regressions like #9455
## Detailed Description of the Pull Request / Additional comments
You're really gonna want to clean the sln first, then merge this into
your branch, then rebuild. It's very likely that old winmds will get
left behind. If you see something like
```
Error MDM2007 Cannot create type
Microsoft.Terminal.TerminalControl.KeyModifiers in read-only metadata
file Microsoft.Terminal.TerminalControl.
```
then that's what happened to you.
OpenConsole.psm1 cached its root directory on import, which made it very
difficult to move into another Terminal clone and _do things_ (like code
formatting).
By resolving the root directory again per-cmdlet, we gain the ability
to...
```powershell
cd terminal
import-module ./tools/openconsole.psm1
cd ../terminal-2
invoke-codeformat
```
... and have it format the correct directory (terminal-2) instead of the
incorrect one (terminal).
This does unfortunately break the openconsole cmdlets _inside dep/wil
and dep/gsl_ because they are separate git repositories. This is taken
as an acceptable cost.
This finishes the implementation of `--window` to also accept a string
as the "name" of the window. So you can say
```sh
wt -w foo new-tab
wt -w foo split-pane
```
and have both those commands execute in the same window, the one named
"foo". This is just slightly more ergonomic than manually using the IDs
of windows. In the future, I'll be working on renaming windows, and
displaying these names.
> #### `--window,-w <window-id>`
> Run these commands in the given Windows Terminal session. This enables opening
> new tabs, splits, etc. in already running Windows Terminal windows.
> * If `window-id` is `0`, run the given commands in _the current window_.
> * If `window-id` is a negative number, or the reserved name `new`, run the
> commands in a _new_ Terminal window.
> * If `window-id` is the ID or name of an existing window, then run the
> commandline in that window.
> * If `window-id` is _not_ the ID or name of an existing window, create a new
> window. That window will be assigned the ID or name provided in the
> commandline. The provided subcommands will be run in that new window.
> * If `window-id` is omitted, then obey the value of `windowingBehavior` when
> determining which window to run the command in.
Before this PR, I think we didn't actually properly support assigning
the id with `wt -w 12345`. If `12345` didn't exist, it would make a new
window, but just assign it the next id, not assign it 12345.
## References
* #4472, #8135
* https://github.com/microsoft/terminal/projects/5
## Validation Steps Performed
Ran tests
Messed with naming windows, working as expected.
Closes https://github.com/microsoft/terminal/projects/5#card-51431478
Saw this while snooping around, the gci command on PowerShell core seems
to store the full path in the variable as oppose to just the leaf.
The other modification is to use the PowerShell module that vs ships to
setup the environment.
This accomplishes the first step towards embedding a preview on the Profiles/ColorSchemes page, by moving the `TerminalSettings` object over to the Terminal Settings Model project. We'll leverage this in a later PR to construct an embedded terminal in the settings UI.
`TerminalSettings` had to see a few more functions exposed in the IDL
(including some inheritance stuff).
Refresh the JSON to make TerminalSettings do it's thing across all the
open terminals.
References #9122 - Terminal Preview
References #6800 - SUI Epic
Currently, when loading command with sub-commands that fail to parse,
we result with command that:
* Is not considered nested (has no sub-commands)
* Has no action of its own
The commit contains a few changes:
1. Protection in the dispatch that will prevent NPE
2. Change in the command parsing that will no load
a command if all its sub-commands failed to parse
3. We will add a warning in this case (the solution is somewhat
hacky, due to the hack that was there previously)
When such command is passed to a dispatch we crash with NPE.
Closes#9448
Since #8602 merged, we need to pass a child of the settings object to
the TermControl upon initializing it. Since this happens in a few places
in `TerminalPage`, its probably best to use a helper.
Closes#9292
When working on #9403 I completely forgot that
double-click and triple-click should work even without shift.
Fixed it by allowing multi-selection even if not shift is pressed.
Closes#9453
## Validation Steps Performed
* [x] single click = no selection
* [x] single click and drag = selection starting from first point
* [x] single click in unfocused pane and drag = focus pane, selection starting from first point
* [x] double-click = selects a whole word
* [x] triple-click = selects a whole line
* [x] double-click and drag = selects a whole word, drag selects whole words
* [x] triple-click and drag = selects a whole line, drag selects whole lines
* [x] Shift single-click = defines start point
* [x] second Shift single-click = defines end point
* [x] Shift double-click = selects entire word
* [x] Shift triple-click = selects entire line
* [x] Shift double-click and drag = selects entire word, drag selects whole words
* [x] Mouse mode: Shift single-click = defines start point
* [x] Mouse mode: second Shift single-click = defines end point
* [x] Mouse mode: Shift double-click = selects entire word
* [x] Mouse mode: Shift triple-click = selects entire line
* [x] Mouse mode: Shift double-click and drag = selects entire word, drag selects whole words
Parenthesis in incorrect spot for default app policy check.
Related work items: MSFT-32071839
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 537ab5dfd9cc6af60b570697e77bba4b45822e05
I've also taken the opportunity to kill the xxxFullPDB trick. The
intermediate PDB is allowed to remain "vc141.pdb" or whatever it wants
to be. PDBs are now simply named after their projects, as was always
tradition.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Shift+click on a profile to open a new wt window with that profile. Or, shift+click on the '+' button to open a new wt window with the default profile.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9395
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing
[Git2Git] Merged PR 5760120: Add propsheet chooser to Windows
Now the inbox console propsheet can choose which terminal is default
Related work items: MSFT-32007202 #492
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev d80f506858bd990c267de6cefae7ff55707b3a57
## Summary of the Pull Request
Instead of displaying "Maximize" in the tooltip for the maximize/restore button even when the window is maximized, it now displays "Restore Down".
## References
Fixes#5693
## PR Checklist
* [X] Closes#5693
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
## Validation Steps Performed
Tested manually.
Change the vintage cursor height number box to a slider.
## References
Related: #9370
## PR Checklist
* [x] Closes#9377
* [x] zadjii-msft edit: Now _this one_ closes#9175
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Schema updated.
* [ ]
## Detailed Description of the Pull Request / Additional comments
It seems like the cursor height couldn't be lower than 25 percent regardless of the given value, so I've changed the `MinCursorHeightPercent` in CustomTextRenderer header file.
## Validation Steps Performed
Manual validation
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9382
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
The selection with shift is quite broken in 1.6.
It started with #8611 that introduces cell selection on `shift+click`.
This change resulted in the following defect:
`shift+double-click`, `shift+triple-click` select only parts of the word.
The reason for this is that the first `shift+click` establishes the selection,
while the consequent clicks simply extend it to the relevant boundary
(aka word / line boundary)
However, the logic was broken even before #8611.
For instance, `shift+triple-click` had exactly the same handicap:
`shift+double-click` was establishing the selection and the
third click was simply extending it to the line boundary.
This PR addresses the both defects in the following manner:
upon multi-click that starts new selection we establish
a new selection on every consequent click using appropriate mode
(cell/word/line) rather than trying to extend one.
For this purpose we remember the position that started the selection.
## Summary of the Pull Request
This replaces the Profiles > Font Face text box with a combo box.
## References
#6800 - Settings UI Epic
## Detailed Description of the Pull Request / Additional comments
- Enumerating the fonts
- [This doc](https://docs.microsoft.com/en-us/windows/win32/directwrite/font-enumeration) was the main reference used to enumerate the fonts. It was mildly adapted to use WinRT instead of WRL.
- Updating the UI
- Similar to other combo box settings, `Profiles` keeps a reference to the current value. We use that as a way to update the settings model. If an invalid value is used, we fallback to `Cascadia Mono`.
- A checkbox was added to let the user select from all of the installed fonts, or just the monospace ones.
## Demo
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9345
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated - not yet, will be once conceptually approved
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Introduce optional `suppressApplicationTitle` in to `NewTerminalArgs`.
When set (either to true or false) overrides profile configuration.
Introduce `--suppressApplicationTitle` flag to command line arguments.
When provided for sub=command,
sets the value in the relevant `NewTerminalArgs` to `true`
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8969
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
We were using the wrong close icon for the settings tab. This is a side effect of `TerminalTab` overriding `TabBase`'s implementation.
#6800 - Settings UI Epic
Closes#9317
As mentioned in https://github.com/microsoft/terminal/issues/9354#issuecomment-790034728
`GETSET_SETTING` is too visually similar to `GETSET_PROPERTY`, but with a _VERY_ different meaning. I think that merely changing the name of the macro would make it harder for us to make this mistake again.
## Summary of the Pull Request
Add `Minimum` and `Maximum` for the cursor height numberbox in the SUI.
Add `Minimum` for the history size numberbox in the SUI.
## PR Checklist
* [x] Closes#9357, Closes#9175
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Validation Steps Performed
Manual validation
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fix for #9354
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#9354
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
I wanted to start using VScode. It wasn't easy. I wrote some tasks that allow us to build the various flavors of OpenConsole and Windows Terminal from one of the tasks. I also wrote a task that allows registration of the loose Windows Terminal package and a shortcut one to launch it.
Also it was grinding away at its own Intellisense forever because it was indexing obj, bin, packages, etc. I excluded those.
Things should be easier now for folks in general. I expect we'll make more task types in the future.
This update fixes some issues in Cascadia Code's February update:
microsoft/cascadia-code#406 - updated anchor type to lock with the other equals-related ligatures
microsoft/cascadia-code#408 - corrected component used for glyph to align with Unicode
microsoft/cascadia-code#412 - updated locl features removing iacute_j ligature and Catalan substitution
microsoft/cascadia-code#414 - increased overlaps of middle glyph for arrow ligatures
microsoft/cascadia-code#415 - reduces width of macronbelow
microsoft/cascadia-code#416 - rolls back name ID 4 modification as JetBrains cannot process it correctly
microsoft/cascadia-code#428 - rolls back variation of the underline to prevent MVAR table generation
Full changelist:
* Repositioned tilde in related ligatures. Previously it was higher than the standard one.
* Added missing vietnamese anchors on acute and grave (futureproofing).
* Corrected / made consistent greater & less positioning in </> and <$> related ligatures.
* Otherwise reviewed hinting
Turns out we were adding the fragment source to profiles we update. This
PR fixes it so we keep the original source.
## Validation Steps Performed
Existing profile settings are maintained
Closes#9290
Fixes a bug introduced by #9224 where the wrong keyboard accelerator
would appear in the new tab dropdown. We were looking for the "settings
file" version of the action, as opposed to the "settings UI" version.
## References
#9224 - Settings UI as default
#6800 - Settings UI Epic
In #8602, we started passing a child of the `TerminalSettings` to the
control upon tab initialization, but forgot to do the same when new
controls get created on a pane split.
## Validation Steps Performed
Settings reload with multiple panes works
Closes#9280
Similar to #9262. This creates another data template specifically for
command palette items that open up more options. We leverage the
localization key from #9262 to apply help text to this template
automatically.
Using the data template approach, we now have no need for the
`HasNestedComandsVisibilityConverter`, so that set of files is now
deleted. The logic to detect nested commands was moved to the template
selector.
## Validation Steps Performed
Tested using NVDA.
Addresses #7908 better
This makes the settings UI the default settings experience.
As shown below, the following bindings are now default:
- <kbd>ctrl+,</kbd> --> settings ui
- <kbd>ctrl+shift+,</kbd> --> settings.json
- <kbd>ctrl+alt+,</kbd> --> defaults.json
The dropdown settings button aligns with this heuristic:
- click --> settings ui
- shift+click --> settings.json
- alt+click --> defaults.json
- if alt and shift both pressed, open settings.json
#6800 - Settings UI Epic
This sets the automation property (name) on the tab view item we expose in XAML.
## PR Checklist
* [x] Closes#9254
## Validation Steps Performed
Tested under NVDA and Accessibility Insights
This was the only thing blocking me from signing off on #9224 in 1.7.
! CHANGE WARNING !
If we bind to `T.S.M.Command`s in XAML, then the compiler gets _very
angry_ at us. It generates two different versions of
`GetReferenceTypeMember_Icon` in `XamlTypeInfo.g.cpp`. Presumably
because there's an Icon on a NavViewItem and an Icon on a Command. We
don't really know why. Fortunately, the fix is "rename Command::Icon" to
"Command::IconPath". It's dumb, but it works. Thanks for the help with
that one Carlos ☺️
Unblocks #9224
It appears as though the optimizer is generating a sequence of
instructions on x64 that results in a nonsense std::wstring_view being
passed to SetPixelShaderPath when it's converted from a winrt::hstring.
Initially, I suspected that the issue was in us caching `_settings`
before we broke off the coroutine to update settings on the UI thread. I
implemented a quick fix for this (applying values off the new settings
object while also storing it in the control instance), but it didn't
actually lead anywhere. I do think it's the right thing to do for code
health's sake. Pankaj already changed how this works in 1.7: we no
longer (ever) re-seat the `_settings` reference... we only ever change
its parentage. Whether this is right or wrong is not for this paragraph
to discuss.
Eventually, I started looking more closely at the time travel traces. It
seriously looks like the wstring_view is generated wrong to begin with.
The debugger points directly at `return { L"", 0 };` (which is correct),
but the values we get immediately on the other side of the call are
something like `{ 0x7FFFFFFF, 0 }` or `{ 0x0, 0x48454C4C }`.
I moved _just_ the call to SetPixelShaderPath into a separate function.
The bug miraculously disappeared when I marked it **noinline**. It
reappeared when the function was fully inlined.
To avoid any future issues, I moved the whole UI thread body of
UpdateSettings out into its own function, to be called only while on the
UI thread. This fixes the bug.
Closes#8723.
Closes#9064.
I found a repro (update the settings file every 0.5 seconds and resize
the terminal wildly while it's doing so) that would trigger the bug
within ~10 seconds. It stopped doing so.
(cherry picked from commit 91b867102c)
Add a setting to turn off the warning if 'Touch Keyboard and
Handwriting Panel Service' is disabled.
The service might not start in some case, and it doesn't affect the
input in some computer. This PR turn off the warning even if the
service is disabled. The setting name is "inputServiceWarning".
## Validation Steps Performed
I manually set the service to "Disabled", restarted the Terminal,
verified the warning up, then set "inputServiceWarning" to false and
restarted the Terminal, and the warning didn't appear.
References #8095
References https://github.com/microsoft/terminal/issues/7886#issuecomment-729350169
When the user executes `--help`, make sure we force the creation of a new window, so that the `MessageBox` will actually appear.
Add tests too.
* [x] I work here
* [x] Fixes#9230
* [x] Tests added
I'm gonna have to immediately rewrite those tests for https://github.com/microsoft/terminal/projects/5#card-51431478, but this issue is ship-blocking so I don't care
The command palette's list items explicitly specify the "AcceleratorKey"
property (for UIA) and set it to the key binding. Putting it in a label
inside the list item makes Narrator read it out twice ("New Tab ...
ctrl+shift+t ... ctrl+shift+t").
Addresses #7913 (to be closed when a11y re-evaluates)
A header line is missing from a few `.svg` files, denying their use (via
a security error) in WordPress (if svg support is enabled). The upload
is rejected even though the web browser could display the image if it
were dragged into its own tab.
The `.svg` images appear to have been edited at different times and with
different tools. Their contents are in a different style. Two of them
are beautiful and the rest do not follow suit and do not function the
same.
I don't know enough to make them all the same style, but changes can be
made to three of them to make them work the way I was expecting (see
below).
## Validation Steps Performed
- Perform the change with a text editor
- Open a new WordPress post page
- Drag-and-drop the changed file into that WordPress edit box
- (The WordPress media upload dialog appears and the file is uploaded)
- Confirmed that the file does not trigger a "security error" (as seen
at the top of the right-hand column)
- Confirmed that the image appears as a thumbnail preview
`Terminal_Pre_HC.svg` is not fixable in this way, and I don't understand
svg well enough to troubleshoot easily.
Finally implements the `newWindow` action. It does so by
`ShellExecute`ing `wt.exe` with commandline args corresponding to the
ones that would create the same `NewTerminalArgs`. This works with #8898
and #9118 to allow new windows (even with `windowingBehavior:
useExisting`)
This is taken from my auto-elevate branch, hence the references to
elevation
References #5000
References projects/5
References #8898
References #9118Closes#1051
This PR adds improved override message generation for inheritance in
SUI. The settings model now has an `OriginTag` to be able to denote
where a `Profile` came from. This tag is used in the `SettingContainer`
to generate a more specific override message.
## References
#6800 - SUI Epic
#8919 - SUI Inheritance PR
#8804 - SUI Inheritance (old issue)
## Detailed Description of the Pull Request / Additional comments
- **Terminal Settings Model**
- Introduced `PROJECTED_SETTING` as a macro to more easily declare the
functions for each setting
- Introduced `<setting>OverrideSource` which finds the `Profile` that
has \<setting\> defined
- Introduced `OriginTag Profile::Origin {Custom, InBox, Generated}` to
trace where a profile came from
- `DefaultProfileUtils` creates profiles for profile generators. So
that now sets the `Origin` tag to `Generated`
- `CascadiaSettings::LoadDefaults()` tags all profiles created as
`InBox`.
- The view model had to ingest the API change to be able to interact
with `<setting>OverrideSource`
- **Override Message Generation**
- The reset button now has a more specific tooltip
- The reset button now only appears if base layer is being overridden
- We use the settings model changes to determine the message to
display for the target
## Validation Steps Performed
Tested the following cases:
- overrides nothing (inherited setting)
- overrides value inherited from...
- base layer
- a profile generator
- in-box profile
- global settings should not have this feature
This PR is a resurrection of #8414. @Hegunumo has apparently deleted
their account, but the contribution was still valuable. I'm just here to
get it across the finish line.
This PR adds new global setting `centerOnLaunch`. When set to `true`,
the Terminal window will be centered on the display it opens on.
So the interactions are like:
* `initialPos: x,y`, `centered: true`, `launchMode: default`
center on the monitor that x,y is on
* `initialPos: x,y`, `centered: true`, `launchMode: maximized`
maximized on the monitor that x,y is on (centered adds nothing)
* `initialPos: <omitted>`, `centered: true`, `launchMode: default`
center on the default monitor
* `initialPos: <omitted>`, `centered: true`, `launchMode: focus`
center, focus mode on the default monitor
* `initialPos: <omitted>`, `centered: true`, `launchMode: maximized`
maximized on the default monitor (centered adds nothing)
## Validation Steps Performed
I've played with it on multiple different monitors, and it seems to work
on all of them.
Closes#8414 (original PR)
Closes#7722
Co-authored-by: Kiminori Kaburagi <yukawa_hidenori@icloud.com>
Updates the following text in the settings UI
- focus follow mouse mode is introduced to be more instructional
- focus follow mouse mode tooltip removed
- avoid double negative in "disable pane animation"
Closes#8900
Updates #6459 Settings UI text
Adds support for the `windowingBehavior` global setting. This setting
controls how mutiple instances of `wt` behave in the absence of the `-w`
parameter. This setting has three values:
* `"useNew"`: (default) Multiple `wt` invocations (without the `-w`
param) always create new windows.
* `"useAnyExisting"`: When starting a new `wt`, we'll instead default to
any existing windows. `wt -w -1` will still create new windows.
* `"useExisting"`: Similar to `useAnyExisting`, but limits to
windows on the current desktop.
The IVirtualDesktopManager interface is _very_ limited. Hence why we
have to track the HWNDs manually, and ask if they're on the current
desktop.
## Validation Steps Performed
I've been playing with it for a week now.
References #5000
References projects/5
References #8898
Spec'd in #8135Closes#2227
Closes https://github.com/microsoft/terminal/projects/5#card-51431448
Closes https://github.com/microsoft/terminal/projects/5#card-51431433
Fixes exception in FilteredCommandTests, caused due to
an attempt to instantiate PropertyChangedEventArgs on non-UI thread.
Though the diff might look scary it is just wrapping with `RunOnUIThread`
This PR performs a large overall polish of the color schemes page:
- Ensures keyboard navigation is holistically improved (i.e. fully
accessible, no lost focus, etc...)
- Adds tooltips and automation properties to all controls
- Redesigns the page according to @mdtauk's approved design
([link](https://github.com/microsoft/terminal/pull/8997#issuecomment-771623842)).
Note, there are some minor modifications to the design that were
approved by @cinnamon-msft.
- Automatically reflow's the color buttons when they do not fit in
horizontal mode
## Detailed Description of the Pull Request / Additional comments
- Redesign
- a data template was introduced to make color representation
consistent and straightforward
- `ContentControl` is used to hold a reference to the
`ColorTableEntry` and represent it properly using the aforementioned
data template.
- The design is mainly a StackPanel holding two grids: color table &
functional colors.
- The color table is populated via code. After much thought, this
seems to be the easiest way to correctly bind 16 controls that are
very similar.
- The functional colors are populated via XAML manually.
- We need a grid to separate the text and the buttons. This allows for
scenarios like "selection background is the longest string" to force
the buttons and text to be aligned.
- Reflow
- A `VisualStateManager` uses an `AdaptiveTrigger` to change the
orientation of the color tables' stack panel. The adaptive trigger
was carefully calculated to align with the navigation view's
breakpoint.
- Keyboard Navigation
- (a lesson from `SettingContainer`) `ContentControl` can be focused
as opposed to the content inside of it. We don't want that, so we
set `IsTabStop` to false on it. That basically fixes all of our
keyboard navigation issues in this new design.
- Automation Properties and ToolTips
- As in my previous PRs, I can't seem to figure out how to bind to a
control's automation property to its own tooltip. So I had to do
this in the code and add a few `x:Name` around.
## Validation Steps Performed
- Manually tested...
- tab navigation
- accessibility insights
- NVDA
- changing color schemes updates color table
- specific scenario:
- change a color table color and a functional color
- navigate to a different color scheme
- navigate back to the first color scheme
- if the colors persist, the changes were propagated to the settings model
References #8997 - Based on the work from @Chips1234
References #6800 - Settings UI Epic
Closes#8765 - Polish Color Schemes page
Closes#8899 - Automation Properties
Closes#8768 - Keyboard Navigation
`ComboBox` has a text search function that allows users to type letters, and the `ComboBoxItem` starting with those letters is shown. In order to enable this functionality, the underlying items must be `IStringable`. This exposes a `ToString()` function and fixes all of our issues.
This PR adds the `IStringable` interface to `ColorScheme`, `Profile`, and `EnumEntry`.
## References
#6800 - Settings UI Epic
#8768 - Keyboard Navigation
https://github.com/microsoft/microsoft-ui-xaml/issues/4182 - discussion with WinUI about how to overcome this issue
## Validation Steps Performed
Tested...
- Launch > Default Profile
- Color Schemes > Name
- Profile > Appearance > Color scheme
- Profile > Appearance > Font weight
Also tested radio buttons, but those still don't work, unfortunately. Looks like they don't have the same underlying mechanism.
Support for fragment extensions, according to the implementation
outlined in #7584 (which calls them proto extensions.)
See #7584 for more information.
## Validation Steps Performed
Self-testing by creating the folder
`%LOCALAPPDATA%\Microsoft\Windows Terminal\Fragments`
and adding a json file into it to modify and add profiles
Also self-tested with an app extension
Closes#1690
A bunch of our local tests regressed recently. I'm unsure as to when
this happened. Clearly, we all do a super good job of running these
tests 😄.
* I had to make sure the call to `AppLogic::CurrentAppSettings` was
try/caught, because that doesn't work in the tests
* I had to make the `Pointer*` events take a weak pointer to the
`TerminalPage` because for whatever reason, they'd be called at a
weird point in the test init, causing the tests to fail. It was weird.
Almost as if the TerminalPage had been released, but the test logs
showed it hadn't barely been set up yet? Whatever, this fixes it.
* The `VerifyCommandPaletteTabSwitcherOrder` test needed to take a time
out, for reasons that are not totally clear to me. That one was flakey
and I hate it.
### Checklist:
* [x] Doesn't close anything, this is just something I noticed.
* [x] Doesn't require docs to be updated, it's test fixes
* [x] Yea, I ran the tests
/cc @Don-Vito: The `FilteredCommandTests` all crashed immediately for
me. I'm not sure what's causing that - I _think_ everything we need for
those tests is set up right? The generated `AppxManifest.xml` had all
the right classes listed in it, I really can't be sure what was wrong
there. These tests aren't run in CI so it's not a super big deal, but I
thought I'd let you know.
(cherry picked from commit ccda434f69)
This PR is a resurrection of #8522. @Hegunumo has apparently deleted
their account, but the contribution was still valuable. I'm just here to
get it across the finish line.
This PR adds new action for navigating to the next & previous search
results. These actions are unbound by default. These actions can be used
from directly within the search dialog also, to immediately navigate the
results.
Furthermore, if you have a search started, and close the search box,
then press this keybinding, _it will still perform the search_. So you
can just hit <kbd>F3</kbd> repeatedly with the dialog closed to keep
searching new results. Neat!
If you dispatch the action on the key down, then dismiss a selection on
a key up, we'll end up immediately destroying the selection when you
release the bound key. That's annoying. It also bothers @carlos-zamora
in #3758. However, I _think_ we can just only dismiss the selection on a
key up. I _think_ that's fine. It _seems_ fine so far. We've got an
entire release cycle to futz with it.
## Validation Steps Performed
I've played with it all day and it seems _crisp_.
Closes#7695
Co-authored-by: Kiminori Kaburagi <yukawa_hidenori@icloud.com>
In the FFM mode, hovering on the pane might dismiss renamer.
To address this we want to make sure that FFM is applied
only if the Terminal Tab is focused.
This is my attempt to isolate all the dwrite font related thing by
introducing a new layer - `DxFontRenderData`. This will free
`DxRenderer` & `CustomTextLayout` from the burden of handling fonts &
box effects. The logic is more simplified & streamlined.
In short I just moved everything fonts-related into `DxFontRenderData`
and started from there. There's no modification to code logic. Just pure
structural stuff.
SGR support tracking issue: #6879
Initial Italic support PR: #8580
This PR adds support for the VT line rendition attributes, which allow
for double-width and double-height line renditions. These renditions are
enabled with the `DECDWL` (double-width line) and `DECDHL`
(double-height line) escape sequences. Both reset to the default
rendition with the `DECSWL` (single-width line) escape sequence. For now
this functionality is only supported by the GDI renderer in conhost.
There are a lot of changes, so this is just a general overview of the
main areas affected.
Previously it was safe to assume that the screen had a fixed width, at
least for a given point in time. But now we need to deal with the
possibility of different lines have different widths, so all the
functions that are constrained by the right border (text wrapping,
cursor movement operations, and sequences like `EL` and `ICH`) now need
to lookup the width of the active line in order to behave correctly.
Similarly it used to be safe to assume that buffer and screen
coordinates were the same thing, but that is no longer true. Lots of
places now need to translate back and forth between coordinate systems
dependent on the line rendition. This includes clipboard handling, the
conhost color selection and search, accessibility location tracking and
screen reading, IME editor positioning, "snapping" the viewport, and of
course all the rendering calculations.
For the rendering itself, I've had to introduce a new
`PrepareLineTransform` method that the render engines can use to setup
the necessary transform matrix for a given line rendition. This is also
now used to handle the horizontal viewport offset, since that could no
longer be achieved just by changing the target coordinates (on a double
width line, the viewport offset may be halfway through a character).
I've also had to change the renderer's existing `InvalidateCursor`
method to take a `SMALL_RECT` rather than a `COORD`, to allow for the
cursor being a variable width. Technically this was already a problem,
because the cursor could occupy two screen cells when over a
double-width character, but now it can be anything between one and four
screen cells (e.g. a double-width character on the double-width line).
In terms of architectural changes, there is now a new `lineRendition`
field in the `ROW` class that keeps track of the line rendition for each
row, and several new methods in the `ROW` and `TextBuffer` classes for
manipulating that state. This includes a few helper methods for handling
the various issues discussed above, e.g. position clamping and
translating between coordinate systems.
## Validation Steps Performed
I've manually confirmed all the double-width and double-height tests in
_Vttest_ are now working as expected, and the _VT100 Torture Test_ now
renders correctly (at least the line rendition aspects). I've also got
my own test scripts that check many of the line rendition boundary cases
and have confirmed that those are now passing.
I've manually tested as many areas of the conhost UI that I could think
of, that might be affected by line rendition, including things like
searching, selection, copying, and color highlighting. For
accessibility, I've confirmed that the _Magnifier_ and _Narrator_
correctly handle double-width lines. And I've also tested the Japanese
IME, which while not perfect, is at least useable.
Closes#7865
Implement the `XTPUSHSGR` and `XTPOPSGR` control sequences (see #1796).
This change adds a new pair of methods to `ITermDispatch`:
`PushGraphicsRendition` and `PopGraphicsRendition`, and then plumbs the
change through `AdaptDispatch`, `TerminalDispatch`, `ITerminalApi` and
`TerminalApi`.
The stack logic is encapsulated in the `SgrStack` class, to allow it to
be reused between the two APIs (`AdaptDispatch` and `TerminalDispatch`).
Like xterm, only ten levels of nesting are supported.
The stack is implemented as a "ring stack": if you push when the stack
is full, the bottom of the stack will be dropped to make room.
Partial pushes (see the description of `XTPUSHSGR` in Issue #1796) are
implemented per xterm spec.
## Validation Steps Performed
Tests added, plus manual verification of the feature.
Closes#1796
Dustin L. Howett (3)
* Fix the Host Proxy DLL reference in ServerLib (GH-9129)
* ci: fix spelling
* Format the incoming inbox code
Michael Niksa (1)
* Eliminate more transient allocations: Titles and invalid rectangles and bitmap runs and utf8 conversions (GH-8621)
Related work items: MSFT-31755835
This will make sure to summon the terminal window when running a
commandline in it.
* If the window is on another desktop, the OS will switch to the desktop
the window is on.
* If the window is minimized, it will restore it.
This is taken from my quake mode branch. It works aggressively. 848682a,
fee6473, 342d3f2, 5052d31 all had other attempts at doing this, but they
didn't work reliably. Part of the trick is that I don't _think_ Windows
wants one process to be able to move another process into the
foreground. In this case though, we _do_ want to move ourself into the
foreground, and this `AttachThreadInput` hack seems to be the only way
to do it reliably.
References #5000
Uses code authored for #653
Closes https://github.com/microsoft/terminal/projects/5#card-54636373
Fixes a regression of command palette accessibility. The regression was
introduced in #8377 by setting `IsTabStop` to false. Though the commands
would light up, the focus didn't technically get on the command, so the
screen reader would just read the text box.
## Validation Steps Performed
Opened the command palette while NVDA is active. It now reads the
commands as focus moves on them.
The terminal WPF container might have a (0,0) render size when VS
eagerly attempts to initialize the terminal tool window when it is
pinned during startup, but no actual UI is shown due to the VS welcome
dialog that shows up before VS can build the terminal tool window.
We've fixed this issue previously in other areas but only recently did
we get a complete enough dump to find the corner cases for this issue.
This should patch all the gaps that cause this bug.
## Validation Steps Performed
I've manually validated the scenarios shown in the user dumps.
## Summary of the Pull Request
After rename ends (either by enter or escape) the rename box
gets collapsed and the focus moves to the next tab stop
in the TabView (e.g., new tab button).
To overcome this:
* Added RenameEnded event to TabHeaderControl
* Forwarded it as RenamerDeactivated from TerminalTab
* Registered in the TerminalPage to focus the active control upon
RenamerDeactivated if focus didn't move to tab menu.
This means, no matter how you close the renamer,
the current terminal gains the focus.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/9160
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
- 0b0dbdf Makes the browse buttons center vertically aligned
- This is now made possible by #8919. The "center" used to include the height of the header. Now that it's separated, the center is solely calculated to be the text box.
- Closes#8764
- 0288f06 Fix keyboard navigation focus for color schemes rename button
- Enter/Esc when in the scheme renamer now focuses the combo box
- Keyboard-invoking accept/cancel button focuses the rename button
- References #8765 and #8768
- d5ef552 Cyclical tab navigation
- now, if you try to tab past the save button, you cycle back to the beginning of the navigation view
- this is consistent with the xaml controls gallery
- References #8768
- a613b08 AutomationProperties for Save, Reset, and open json buttons
- References #8899
Aims to fix#8791.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Prior to this PR, if the Windows key was pressed as a part of a key combination, then selection was being dismissed. For example, when a user pressed `Windows` + `Shift` + `S` keys to invoke the _Capture & Annotate_ tool.
This PR adds an exception for not clearing selection when either of the two Windows keys are pressed as part of a key combination.
It was tested manually by trying to reproduce the issue.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#8791
* [x ] CLA signed.
* [x ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8791
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
1. Build Terminal.
2. Write anything & make a selection.
3. Press `Windows`+ `Shift` + `S` keys.
4. The _Capture & Annotate_ tool appears but the selection made in step 2 isn't dismissed (doesn't disappear).
## References
* See also #8617
## PR Checklist
* [x] Supports #3075
* [x] I work here.
* [x] Manual test.
## Detailed Description of the Pull Request / Additional comments
### Window Title Generation
Every time the renderer checks the title, it's doing two bad things that
I've fixed:
1. It's assembling the prefix to the full title doing a concatenation.
No one ever gets just the prefix ever after it is set besides the
concat. So instead of storing prefix and the title, I store the
assembled prefix + title and the bare title.
2. A copy must be made because it was returning `std::wstring` instead
of `std::wstring&`. Now it returns the ref.
### Dirty Area Return
Every time the renderer checks the dirty area, which is sometimes
multiple times per pass (regular text printing, again for selection,
etc.), a vector is created off the heap to return the rectangles. The
consumers only ever iterate this data. Now we return a span over a
rectangle or rectangles that the engine must store itself.
1. For some renderers, it's always a constant 1 element. They update
that 1 element when dirty is queried and return it in the span with a
span size of 1.
2. For other renderers with more complex behavior, they're already
holding a cached vector of rectangles. Now it's effectively giving
out the ref to those in the span for iteration.
### Bitmap Runs
The `til::bitmap` used a `std::optional<std::vector<til::rectangle>>`
inside itself to cache its runs and would clear the optional when the
runs became invalidated. Unfortunately doing `.reset()` to clear the
optional will destroy the underlying vector and have it release its
memory. We know it's about to get reallocated again, so we're just going
to make it a `std::pmr::vector` and give it a memory pool.
The alternative solution here was to use a `bool` and
`std::vector<til::rectangle>` and just flag when the vector was invalid,
but that was honestly more code changes and I love excuses to try out
PMR now.
Also, instead of returning the ref to the vector... I'm just returning a
span now. Everyone just iterates it anyway, may as well not share the
implementation detail.
### UTF-8 conversions
When testing with Terminal and looking at the `conhost.exe`'s PTY
renderer, it spends a TON of allocation time on converting all the
UTF-16 stuff inside to UTF-8 before it sends it out the PTY. This was
because `ConvertToA` was allocating a string inside itself and returning
it just to have it freed after printing and looping back around again...
as a PTY does.
The change here is to use `til::u16u8` that accepts a buffer out
parameter so the caller can just hold onto it.
## Validation Steps Performed
- [x] `big.txt` in conhost.exe (GDI renderer)
- [x] `big.txt` in Terminal (DX, PTY renderer)
- [x] Ensure WDDM and BGFX build under Razzle with this change.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add the keyboard navigation to the color picker.
Test manually.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6675
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tested manually
A bug in VS 16.8 makes the WAP packaging project copy System.Core.dll
from the CLR into all WAP packages. We don't need it, and it adds 300kb
to our package (670kb uncompressed).
VS 16.9 sets the AddAdditionalExplicitAssemblyReferences to suppress
this assembly. If we do the same, we can avoid the reference *and* be
eady for VS 16.9.
Contains:
- Delegation Configurator that can lookup/edit/save configuration information to registry
- Conhost can lookup the CLSID of a registered default
- Conhost has the ability to handoff a starting visible-window interactive session to the registered default
- Velocity key since this is a big deal and we want to be careful
- IDL for the interface
Related work items: MSFT-16458099
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 0ca55027d8180fbbaa145f2fe7a15005856c0f7c
Dustin L. Howett (3)
* Move CharToKeyEvents (and friends) into InteractivityBase (GH-9106)
* Update Cascadia Code to 2102.03 (GH-9088)
* verison: bump to 1.7 on main
Josh Soref (1)
* ci: update to Spell check to 0.0.17a (CC-9014)
Leonard Hecker (3)
* Fixed GH-5205: Ctrl+Alt+2 doesn't send ^[^@ (CC-5272)
* Fix issues in tests.xml and OpenConsole.psm1 (CC-9011)
* Fix GH-8458: Handle all Ctrl-key combinations (CC-8870)
Mike Griese (1)
* Add support for running a commandline in another WT window (GH-8898)
Michael Niksa (1)
* Teach the renderer to keep thread alive if engine requests it (GH-9091)
Lachlan Picking (1)
* Fix shader time input (CC-8994)
PankajBhojwani (1)
* Separate runtime TerminalSettings from profile-TerminalSettings (CC-8602)
Chester Liu (2)
* Add support for paste filtering and bracketed paste mode (CC-9034)
* Add support for chaining OSC 10-12 (CC-8999)
Related work items: MSFT-31692939
Due to a minor OS issue, we needed to shim PMR _even more_.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev a83daa5e2af50121d79be082d005ff2e969ad18e
Related work items: MSFT-31478342
Avoid sending mouse move / wheel / release to Terminal in the first place.
This kind of short-circuiting will prevent us reaching the
attempt to send input to connection
(that could result in the warning dialog in the read-only mode)
Closes#9074
These functions have a dependency on the "VT Redirected" versions of
VkKeyScanW, MapVirtualKeyW and GetKeyState. Those implementations depend
on the service locator and therefore the entire interactivity stack.
This meant that anybody depending on just Types had to pull in **the
entire host** worth of dependencies (!).
Since these functions are only used in places where we have or are
testing interactivity, it makes sense to consolidate them here.
(cherry picked from commit 8f73145d9d)
These functions have a dependency on the "VT Redirected" versions of
VkKeyScanW, MapVirtualKeyW and GetKeyState. Those implementations depend
on the service locator and therefore the entire interactivity stack.
This meant that anybody depending on just Types had to pull in **the
entire host** worth of dependencies (!).
Since these functions are only used in places where we have or are
testing interactivity, it makes sense to consolidate them here.
`CascadiaSettings::UpdateColorSchemeReferences` had two bugs in it:
1. we would never check/update the base layer
2. we would explicitly set the color scheme on a profile referencing the
old name
This PR fixes both of those issues by checking/updating the base layer,
and ensuring that we check if a profile has an explicit reference before
updating it.
Since the affected code is in TSM, I also created an automated local
test.
## Validation Steps Performed
Bug repro steps.
Specifically tested [DHowett's scenario] too.
Test added.
Closes#9094
[DHowett's scenario]: https://github.com/microsoft/terminal/issues/9094#issuecomment-776412781
* Currently TerminalPage registers on CmdPal key events:
* To invoke bindings when the palette is open
* Since some key combinations are not triggered by KeyDown
it registers for PreviewKeyDown
* As a result bindings might be preferred over navigation
(e.g., ctrl+v will paste into Terminal rather than into search box)
* To fix this, I moved all interactions inside the CmdPal into
PreviewKeyDown as well
* In addition, added specific handling for copy/paste
which now allow to interact with search box even if not focused
Closes#9044
Teaches renderer base to keep thread alive if engine requests it.
`DxEngine` now requests it if shaders are on.
- The render engine interface now has a true/false to return whether the
specific renderer wants another frame to immediately follow up. The
renderer base will ask for this information as it ends the paint on
any particular engine (which is the time where invalid regions are
typically cleaned up) and just poke the render thread the same as if
an invalidation request came in from outside of render-land. That will
trigger the render thread to just keep moving in the same way as any
other invalidation.
## Validation Steps Performed
- [x] Actually built it
- [x] Actually try it
I promised this in #8994
## Summary of the Pull Request
**If you're reading this PR and haven't signed off on #8135, go there first.**
This provides the basic parts of the implementation of #4472. Namely:
* We add support for the `--window,-w <window-id>` argument to `wt.exe`, to allow a commandline to be given to another window.
* If `window-id` is `0`, run the given commands in _the current window_.
* If `window-id` is a negative number, run the commands in a _new_ Terminal window.
* If `window-id` is the ID of an existing window, then run the commandline in that window.
* If `window-id` is _not_ the ID of an existing window, create a new window. That window will be assigned the ID provided in the commandline. The provided subcommands will be run in that new window.
* If `window-id` is omitted, then create a new window.
## References
* Spec: #8135
* Megathread: #5000
* Project: projects/5
## PR Checklist
* [x] Closes#4472
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - **sure does**
## Detailed Description of the Pull Request / Additional comments
Note that `wt -w 1 -d c:\foo cmd.exe` does work, by causing window 1 to change
There are limitations, and there are plenty of things to work on in the future:
* [ ] We don't support names for windows yet
* [ ] We don't support window glomming by default, or a setting to configure what happens when `-w` is omitted. I thought it best to lay the groundwork first, then come back to that.
* [ ] `-w 0` currently just uses the "last activated" window, not "the current". There's more follow-up work to try and smartly find the actual window we're being called from.
* [ ] Basically anything else that's listed in projects/5.
I'm cutting this PR where it currently is, because this is already a huge PR. I believe the remaining tasks will all be easier to land, once this is in.
## Validation Steps Performed
I've been creating windows, and closing them, and running cmdlines for a while now. I'm gonna keep doing that while the PR is open, till no bugs remain.
# TODOs
* [x] There are a bunch of `GetID`, `GetPID` calls that aren't try/caught 😬
- [x] `Monarch.cpp`
- [x] `Peasant.cpp`
- [x] `WindowManager.cpp`
- [x] `AppHost.cpp`
* [x] If the monarch gets hung, then _you can't launch any Terminals_ 😨 We should handle this gracefully.
- Proposed idea: give the Monarch some time to respond to a proposal for a commandline. If there's no response in that timeframe, this window is now a _hermit_, outside of society entirely. It can't be elected Monarch. It can't receive command lines. It has no ID.
- Could we gracefully recover from such a state? maybe, probably not though.
- Same deal if a peasant hangs, it could end up hanging the monarch, right? Like if you do `wt -w 2`, and `2` is hung, then does the monarch get hung waiting on the hung peasant?
- After talking with @miniksa, **we're gonna punt this from the initial implementation**. If people legit hit this in the wild, we'll fix it then.
1. Fix progress value not updated
2. Introduce TabStatus object and bind both TabHeaderControl and CommandPalette to it
3. Add support for read-only mode indicator
This is the spec for #597
I am proposing the `tabWidthMode` feature be added first, then `tabWidthMin` and `tabWidthMax` be added in a later release.
PR: #3876
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
The TerminalSettings object we create from profiles no longer gets passed into the control, instead, a child of that object gets passed into the control. Any overrides the control makes to the settings then live in the child. So, when we do a settings reload, we simply update the child's parent and the overrides will remain.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing
## Summary of the Pull Request
Introduces the `SettingContainer`. `SettingContainer` is used to wrap a setting in the settings UI and provide the following functionality:
- a reset button next to the header
- tooltips and automation properties for the setting being wrapped
- a comment stating if you are currently overriding a setting
## References
[Spec - Inheritance in Settings UI](https://github.com/microsoft/terminal/blob/main/doc/specs/%231564%20-%20Settings%20UI/cascading-settings.md)
#8804 - removes the ambiguity of leaving a setting blank
#6800 - Settings UI Epic
#8899 - Automation properties for Settings UI
#8768 - Keyboard Navigation
## PR Checklist
* [X] Closes#8804
## Detailed Description of the Pull Request / Additional comments
A few highlights in this PR:
- CommonResources.xaml:
- we need to merge the SettingContainerStyle.xaml in there. Otherwise, XAML doesn't merge these files properly and can't apply the template.
- Profiles.cpp:
- view model checks if the starting directory and background image were reset, to determine which value to show when unchecking the special value
- `Profiles::OnNavigatedTo()` needs a property changed handler to update its own "Current<Setting>" and update the UI properly
- Profiles.xaml:
- basically wrapped all of the settings we want to be inheritable in there
- `Binding` is used instead of `x:Bind` in some places because `x:Bind` can't find the parent `SettingContainer` and gives you a compiler error.
- Resources.resw:
- had to set the "HeaderText" and "HelpText" on each setting container. Does a decent localization burden, unfortunately.
- `SettingContainer` files
- This operates by creating a template and applying that template over other settings. This allows you to inject the existing controls inside of this. This means that we need to provide our UIElements names and access/modify them via `OnApplyTemplate`
- We had to remove the header from each individual control, and have `SettingContainer` be in charge of it. This allows us to add the reset button in there.
- Due to the problem mentioned earlier about CommonResources.xaml, we can't reference anything from CommonResources.xaml.
- Using `DependencyProperty` to let us set a few properties in the XML files. Particularly, `Has<Setting>` and `Clear<Setting>` are what do all the heavy lifting of interacting with the inheritance model.
## Demo
## Validation Steps Performed
- Verified correct binding behavior with the following generic setting controls:
- radio buttons
- toggle switch
- text block
- slider
- settings with browse buttons
- the background image alignment control
- controls with special check boxes (starting directory and background image)
## Next Steps
- The automation properties have been verified using NVDA. This is a part of resolving #8899.
- The override text is currently "Overrides a setting". According to #8269, we actually want to add a hyperlink in there that navigates to the parent profile object. This will be a follow-up task as it requires settings model changes.
## Summary of the Pull Request
Introduces read-only panes.
When pane is marked as read-only:
1. Attempt to provide user input results in a warning
2. Attempt to close pane - shows dialog
3. Attempt to close hosting tab shows dialog
4. The hosting tab has no close button
## PR Checklist
* [x] Closes#6981
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated - not yet.
* [x] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
1. The readonly logic implemented in `TermControl`
(and prevents any send input)
2. Special handling is required to allow key-bindings
3. The "close-readonly" protections are in TerminalPage.
4. The indication that the pane is readonly is done using lock glyph
5. The indication that the tab contains readonly pane
is done by hiding the close button of the tab
6. The readonly mode is enabled by keyboard shortcut
(the followup might add this to the context menu)
## Validation Steps Performed
## Summary of the Pull Request
Fixes#5205, by replacing another use of `MapVirtualKeyW` with `ToUnicodeEx`.
The latter just seems to be much more consistent at translating key combinations in general.
In this particular case though it fixes the issue, because there's no differentiation in `MapVirtualKeyW` for whether it failed to return a character (`'\0'`) or succeeded in turning `^@` into `'\0'`.
`ToUnicodeEx` on the other hand returns the success state separately from the translated character.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5205
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #5205
## Detailed Description of the Pull Request / Additional comments
This PR changes the behavior of the `Ctrl+Alt+Key` handling slightly:
⚠️ `ToUnicodeEx` returns unshifted characters. ⚠️
For instance `Ctrl+Alt+a` is now turned into `^[^a`. Due to how ASCII works this is essentially the same though because `'A' & 0b11111` and `'a' & 0b11111` are the same.
## Validation Steps Performed
* Run `showkey -a`
* Ensured `Ctrl+Alt+Space` as well as `Ctrl+Alt+Shift+2` are turned into `^[^@`
* Ensured other, random `Ctrl+Alt+Key` combination behave identical to the current master
This adds "paste filtering" & "bracketed paste mode" to the Windows
Terminal.
I've moved the paste handling code in `TerminalControl` to
`Microsoft::Console::Util` to be able to easily test it, and the paste
transformer from `TerminalControl` to `TerminalCore`.
Supersedes #7508
References #395 (overall bracketed paste support request)
Tests added. Manually tested.
The command palette is ephemeral and is dismissed if the focus
moves to an element which is not the palette's descendant.
Unfortunately, this breaks the (right-click) context menu,
as it is not a child of the palette
(popups are hosted on a separate root element).
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Spec for #3062
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Is documentation
* [ ] Schema updated.
* [x] I work here
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Read the spec
- Fixes empty app title when `showTerminalTitleInTitlebar` is false
- Fixes Tab title propagation to Window title when
`showTerminalTitleInTitlebar` is false
- Fixes Tab title propagation to Window - title doesn't update when
Window is unfocused
1. There were a missing
`_settings.GlobalSettings().ShowTitleInTitlebar()` check. Because of
this Title update event was being fired even when
`showTerminalTitleInTitlebar` is false. This results in empty tab
title to propagate to Window title. Also then after switching tabs
back and forth, tab title propagates to window title. These shouldn't
propagate when `showTerminalTitleInTitlebar` is false. I added the
`showTerminalTitleInTitlebar` check in relevant logic to fix the
behavior.
2. Code was checking `tab.FocusState() != FocusState::Unfocused` , but
when the whole terminal window is not in focus, the active tab is
also in Unfocused state. This was preventing tab title to propagate
to window title when application is unfocused. I added the logic of
checking matching selected tabs' index. This fixes the issue.
## Validation Steps Performed
I did the reproduce steps descripted in the issue to reproduce the bugs.
After applying the fixes, the bugs don't appear anymore while doing the
reproduce steps.
Closes#8704
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/4472-window-management/doc/specs/%235000%20-%20Process%20Model%202.0/%234472%20-%20Windows%20Terminal%20Session%20Management.md) ⇐
## Summary of the Pull Request
This is a more detailed spec for two parts of the "Process Model 2.0" work that's being tracked in #5000. In particular, this spec focuses on the management of Windows Terminal windows, including opening new tabs in existing windows.
Largely, the reader is expected to have already read the spec in progress in #7240, and already be familiar with the concept of "Monarch" and "Peasant" windows as introduced by that spec. For that reason, ⚠ **THIS PR IS TARGETING THE BRANCH FOR #7240** ⚠.
### Abstract
> This document is intended to serve as an addition to the [Process Model 2.0
> Spec]. That document provides a big-picture overview of changes to the entirety
> of the Windows Terminal process architecture, including both the split of
> window/content processes, as well as the introduction of monarch/peasant
> processes. The focus of that document was to identify solutions to a set of
> scenarios that were closely intertwined, and establish these solutions would
> work together, without preventing any one scenario from working. What that
> document did not do was prescribe specific solutions to the given scenarios.
>
> This document offers a deeper dive on a subset of the issues in [#5000], to
> describe specifics for managing multiple windows with the Windows Terminal. This
> includes features such as:
>
> * Run `wt` in the current window ([#4472])
> * Single Instance Mode ([#2227])
## PR Checklist
* [x] Specs: #4472, Specs #2227
* [x] References: #5000, #4472, #2227, #7240
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
### Why are these two separate documents?
I felt that the spec that is currently in review in #7240 and this doc should remain separate, yet closely related documents. #7240 is more about showing how this large set of problems discussed in #5000 can all be solved technically, and how those solutions can be used together. It establishes that none of the proposed solutions for components of #5000 will preclude the possibility of other components being solved. What it does _not_ do however is drill too deeply on the user experience that will be built on top of those architectural changes.
This doc on the other hand focuses more closely on a pair of scenarios, and establishes how those scenarios will work technically, and how they'll be exposed to the user.
### TODO:
* [x] A thought - How will we handle arguments like `--fullscreen`, `--initialSize r,c`? They only apply when creating a new window, right?
* [x] When a `wt -s 1 split-pane` command is executed, we'll need to make sure to not _also_ create a new tab
### ⇒ [doc link](https://github.com/microsoft/terminal/blob/dev/migrie/s/5000/doc/specs/%235000%20-%20Process%20Model%202.0/%235000%20-%20Process%20Model%202.0.md) ⇐
## Summary of the Pull Request
This spec is _exceptionally long_, and is currently a work in progress. There are a few more things I'd like to have experimentally verified (though, I'm fairly certain they _will_ work, with the right combination of flags and such). Additionally, a few sections have remaining TODOs before the spec is finished. However, this spec is already fairly long, and I want to give people as much time to get their eyes on it as possible.
### Abstract
>
> The Windows Terminal currently exists as a single process per window, with one
> connection per terminal pane (which could be an additional conpty process and
> associated client processes). This model has proven effective for the simple
> windowing we've done so far. However, in order to support scenarios like
> dragging tabs into other windows, or having one top-level window with different
> elevation levels within it, this single process model will not be sufficient.
>
> This spec outlines changes to the Terminal process model in order to enable the
> following scenarios:
>
> * Tab Tearoff/ Reattach ([#1256])
> * Run `wt` in the current window ([#4472])
> * Single Instance Mode ([#2227])
> * Quake Mode ([#653])
> * Mixed Elevation ([#1032] & [#632])
## PR Checklist
* [x] Specs: #5000
* [x] References: #1256, #4472, #2227, #653, #1032, #632, #492
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
"disabledProfileSources" is saved to `CascadiaSettings` _not_
`GlobalAppSettings` (and, even then, it's only read when it's used,
never saved). This PR specifically detects if it was defined in
settings.json, and copies it over when the settings are serialized.
## Validation Steps Performed
1. Added "disabledProfileSources" to settings.json, then serialized. -->
"disabledProfileSources" is now maintained.
2. Updated `CascadiaSettings` serialization test
Closes#9032
## Summary of the Pull Request
Fix for #9021
Turns out that what was happening is that the _parent_ pane's `Closed` event was being caught by the tab, and parent panes always have `nullopt` as their id. So now the `Pane::Id()` call always returns an optional, allowing us to check if it has a value before we access it.
## PR Checklist
* [x] Closes#9021
## Validation Steps Performed
No more crash
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- Adds two simple animated shaders to the pixel shaders sample folder
- Updates the readme in the pixel shaders sample folder to add a section explaining the animated shaders
- Modifies some comments in existing shader samples
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8994
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The two shaders I wrote are not especially pretty or interesting, but they should hopefully serve as simple examples for anyone looking to do animated effects. One simply draws a line of inverted pixels that scrolls down the screen, and the other fades the background back and forth between two colors.
I've added a new section to the readme explaining how the shaders work to achieve animated effects.
I've also updated the comments on the existing shaders to clear up a couple of things:
1. Be more explicit that `Time` represents seconds since the shader loaded. Though obvious in hindsight, this was not clear to me when I was first learning/experimenting
2. Explain that `tex` ranges from 0,0 to 1,1. This is important because, when trying to port GLSL shaders from shadertoy, I at first assumed `fragCoord` and `tex` are the same thing but the former actually ranges from 0,0 to the resolution of the canvas, so some of the math doesn't work out if you just substitute it with `tex`.
Any and all feedback welcome.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I ran the shaders manually in a dev build of the Terminal. I auto-spellchecked and manually proofread my additions to the readme and verifed the markdown rendering on github.
This PR fixes the parsing of OSC 9;9 sequences with path surrounded by
quotation marks.
Original OSC 9;9 PR: #8330
Unit test added. Manually tested with oh-my-posh.
Closes#8930
* Fix the incorrect terminalCore path in tests.xml
* Change the -TaefArgs argument of Invoke-OpenConsoleTests and
Invoke-TaefInNewWindow to be []string, allowing
multiple arguments to be passed to TAEF
This adds the support for chaining OSC 10-12, allowing users to set all
of them at once.
**BREAKING CHANGE**
Before this PR, the OSC 10/11/12 command will only be dispatched iff the
first color is valid. This is no longer true. The new implementation
strictly follows xterm's behavior. Each color is treated independently.
For example, `\e]10;invalid;white\e\\` is effectively `\e]11;white\e\\`.
## Validation Steps Performed
Tests added. Manually tested.
Main OSC color tracking issue: #942
OSC 4 & Initial OSC 10-12 PR: #7578
Closes one item in #942
### Plurals and paste tenses
In the past, plurals `foo`+`s` and past tenses `foo`+`ed` were
automatically tolerated. This turned out to be a bad design choice on my
part.
The basic example is that `potatos` would sometimes be treated as a
mistake and sometimes not (depending on the presence of `potato`).
You can see in this PR, that this logic resulted in `Applys` being
accepted as a word along with `AppContainered` -- there's nothing
intrinsically wrong w/ the latter, but unfortunately in order to screen
out the former, my shortcut just couldn't stick around. This means that
the `dictionary`/`expect` files will grow perhaps by a tiny bit, but as
you can see, not really by much.
This is also why `thereses` (a user) was accepted as a word in the past
(therese is in the base dictionary, so `therese` + `s` was acceptable).
### Pull requests
When GitHub initially introduced GitHub Actions, the event for
`pull_request` was created without enough permission for a tool like
this to work properly. I worked around that by using the `schedule`
event. In 2020, they introduced a replacement event
`pull_request_target` which has enough permission. This means that I can
stop relying on the `schedule` event.
### Miscellaneous
* I've folded together some `expect/` files since now is as good a time
as any.
* I've included a hint about `excludes.txt` (I added a similar one for
our primary repo recently, and it came up this week in
`microsoft/terminal` -- @zadjii-msft)
* I've standardized on a default of `.github/actions/spelling` to make
the out of the box experience easier for new adopters, so I'm applying
that change here -- if you're attached to the old directory name,
specifying it is still supported. -- note the directory rename may
cause a merge conflict for people with open PRs and changes to the
contents, this shouldn't be a big problem.
The settings.json was not regenerated if WT was already open. This resulted in the `ShellExecute` from trying to open the settings to pop up Notepad and say that this file didn't exist. We now detect if the settings.json was deleted to kick off loading the settings.
Closes#8955
Pressing Ctrl+\ produces `^\` using the US keyboard layout, thanks to Ctrl-key mappings inside the keyboard layout, whereas some layouts, like the UK extended layout, don't contain those. This causes the character value to be zero and previously caused no VT sequence to be generated under these situations. This PR employs `MapVirtualKeyW` to infer the missing characters.
As a side effect this PR effectively causes _all_ major keys on the keyboard to produce Ctrl+combinations now.
## PR Checklist
* [x] Closes#8458
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests passed
## Validation Steps Performed
Compared all major keys in combination with Ctrl with the app store version of Terminal using `showkey` in WSL. All keys that previously worked still appear to continue to work.
Correctly sets the time input on the pixelShaderSettings struct, which was previously hard-coded to `0.0f`.
## PR Checklist
* [x] Closes#8935
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8935
## Detailed Description of the Pull Request / Additional comments
I added a private field to `DxEngine` to store the timestamp for when a custom shader is first loaded. The field is initialized in `_SetupTerminalEffects()`, and the calculated time value (seconds since the timestamp) passed to the actual shader is set in `_ComputePixelShaderSettings()`.
There remains an issue with with jerky animation due to the renderer not repainting when the window contents are not updated (see discussion in the original issue).
This is basically my first time writing C++; constructive review is enthusiastically welcomed 🙂
## Validation Steps Performed
I manually tested using a variety of simple shaders that rely on time input for animation.
## Summary of the Pull Request
Oops, winrt `IVector`s need to be manually initialized, when default-constructed `std::vector`s didn't. Simple oversight.
## PR Checklist
* [x] Closes#8986
* [x] I work here
* [x] A test would be great but ain't nobody got time for that.
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Ran the terminal with
```json
"schemes" :
[ {} ]
```
First the crash repro'd, now it doesn't.
If there is data being output when a tab is closed, that can sometimes
result in the application crashing, because the renderer may still be in
use at the time is it destroyed. This PR attempts to prevent that from
happening by adding a lock in the `TermControl::Close` method.
What we're trying to prevent is the connection thread still being
active, and potentially accessing the renderer, after it has been
destroyed. So by acquiring the terminal lock in `TermControl::Close`,
after we've stopped accepting new output, we can be sure that the
connection thread is no longer active (it holds the lock while it is
processing output). So once we've acquired and released the lock, it
should be safe to tear down and destroy the renderer.
## Validation Steps Performed
While this crash is difficult to reproduce in general usage, it occurred
quite frequently when testing my `DECPS` implementation (there is some
tricky thread synchronisation, which seems more likely to trigger the
issue). With this patch applied, though, those crashes have stopped
occurring.
I've also stepped through the shutdown code in the debugger, manually
freezing threads to get them aligned in the right way to trigger the
crash (as explained in issue #8734). Again with the patch applied, I can
no longer get the crash to occur.
Closes#8734
I added some sample screenshots on the README for the pixel shader feature
Fixes#8960
## Detailed Description of the Pull Request / Additional comments
I created 4 screenshots using preview windows terminal, one for the default look, and three for the shaders mentioned in the readme.
For the first shader, `Invert.hlsl`, I put it in a table and placed a screenshot of the default next to it. I don't think it would be clear what the shader did without being able to compare it against the default.
For `Rasterbars.hlsl` I put a screenshot right after the code sample for it. I added a screenshot for `Retro.hlsl` just before the last sentence
I also created a folder named Screenshots in `terminal/samples/Pixelshaders` to hold all of the screenshots.
Fix a bug brought in with PR: #8638
see,
#8936#8638
* [x] Closes#8936
* [x] CLA signed
* [x] Tests passed
With the help from @nc-x, the issue is reproduced and fixed by this patch.
CLSCTX_IN_PROCESS is not good enough for all cases to create IShellWindows interface.
Put a CLSCTX_ALL fixes the issue.
Another debugging warning dialogs for reusing not null com_ptr in the loop is fixed too.
(This was shown in debug builds only)
## Summary of the Pull Request
Properly binds `CurrentLaunchMode` and `CurrentTabSwitcherMode` in the Settings UI. The default mode is `OneTime`, resulting in the setting never being set.
I performed a regex search of all "SelectedItem" bindings and these were the only two that were not properly bound.
## References
#6800 - Settings UI Epic
## Validation Steps Performed
Modified tab switcher mode and launch mode via the settings UI. Then saved. Before, the settings would revert back and not get applied. Now they got applied.
Closes#8947
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8975
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
* We dismiss the edit each time `HeaderRenamerTextBox` loses focus
* Unfortunately, this applies also to scenario where the context menu
(copy, paste, select, etc.) is open with the right-click
* The fix is to ignore focus loss if `HeaderRenamerTextBox().ContextFlyout()` is open.
* We can do it as upon the fly-out dismiss the text box regains the focus.
Watson reports show that an "ArgumentException" is being thrown due to `renderSize`
not being valid. Added a check for renderSize before attempting to resize.
This is an extension of #8885. A lot of users have grown accustomed to
using `closePane` to close a tab. This adds `closePane` to the list of
keybindings accepted by #8885, and modifies the `closePane` code to
close the Settings UI if we are in a `SettingsTab`.
## References
#6800: Settings UI Epic
#8885: PR - Settings UI should respect key bindings (temporary solution)
#8882: Issue - Settings UI should respect key bindings
## Summary of the Pull Request
Apparently, we don't need this `TargetRuntime`. That's what was causing VS to think that we were a C# project, and give us that warning. This is the solution we got from the owner of the `.wapproj` plugin.
## References
* Introduced in c33883d852, in PR #8062
## PR Checklist
* [x] Closes#8301
* [x] I work here
Build and ran it fine. Changed TermControl, built and ran it fine. Now let's hope CI likes it.
This reverts the revert in #8838.
The problem was that the `Profile` in the singleton nav state would be
updated before the binding fired, so we'd end up modifying the _new_
profile, because both the old page and the new page would be pointing at
the _new_ profile already.
Instead of using a singleton instance of the profile nav state, we'll
create a new one each time. The new nav state attempt to steal the
selected pivot from the last instance of the nav state, if the profiles
are the same. This means that
This means that we won't end up modifying the new profile. The old
page's nav state will still have the old profile, so it'll still end up
modifying the old `ProfileViewModel`.
## PR Checklist
* [x] I work here
* [x] Tested manually
* [x] Fixes the first point in #8769, again
This PR adds support for the `DECID` (Identify Device) escape sequence,
which allows for querying the terminal type in a way that is backwards
compatible with VT52 terminals.
This simply checks for the `ESC Z` sequence in the `ActionEscDispatch`
method of output state machine, and forwards the query to the existing
`DeviceAttributes` dispatch method, since the expected response is
identical to a `DA` report.
## Validation Steps Performed
I've added an output engine test that verifies that the `ESC Z` sequence
is correctly interpreted as a `DA` query when in ANSI mode, and as a
VT52 identification query when in VT52 mode.
Closes#8857
When we emit a BEL (visual or audible), show an indicator in the tab
header
If the tab the BEL is coming from is not focused when the BEL is raised,
the indicator in its header will be removed when the tab gains focus. If
the tab was already focused when the BEL was emitted, then the indicator
goes away after 2 seconds.
Closes#8106
Make the "use parent process directory" checkbox rely on a computed
property in the ProfileViewModel. It will be enabled when the starting
directory is empty and disabled when it's not. When it's unchecked, the
last-used value will be restored. If there is no last-used value, it
will be set to %USERPROFILE%.
Closes#8805
This adds a "Name" text box to the Profile page in the Settings UI.
Any changes to the name/icon are propagated to the relevant
NavigationViewItem.
Base Layer does not have a "Name".
## References
#6800 - Settings UI Epic
## Summary of the Pull Request
This fixes a bug where renaming/deleting a color scheme would not update profiles that referenced it.
This also adds detection for renaming a color scheme to a name that is already in use, and adds appropriate UI for that.
## References
#6800 - Settings UI Epic
## PR Checklist
* [X] Closes#8756
## Detailed Description of the Pull Request / Additional comments
`Model::CascadiaSettings` was updated to have a `UpdateColorSchemeReferences()` function that updates all profiles referencing the newly renamed color scheme.
`Editor::ColorSchemesPageNavigationState` now takes and exposes a `Model::CascadiaSettings`.
When a color scheme is renamed or deleted, we use `CascadiaSettings` to update our list of color schemes appropriately, then call `UpdateColorSchemeReferences()` to update the profiles.
The tricky part is that `Profile` does not store a direct reference to `ColorScheme`, but rather the name of the color scheme. See [this tread](https://github.com/microsoft/terminal/issues/8756#issuecomment-760375027) for a discussion on this topic.
## Validation Steps Performed
Repro steps from #8756 when renaming/deleting a referenced color scheme.
## Demo
This adds the skeleton code for "bracketed paste mode" to the Windows
Terminal. No actual functionality is implemented yet, just the wiring
for handling DECSET/DECRST 2004.
References #395
Supersedes #7508
Initialize stack variables. check return code from shell lnk loading (GH-8712)
## References
* Commit f273aa679d4d9fb516678fc7ed5fc6495a8e8532 from os repository.
## Detailed Description of the Pull Request / Additional comments
* We found and fixed this in November 2017, but I fumbled the replication and accidentally overwrote the commit. This digs it up from history and puts it back in our code.
* When the shortcut file cannot be read for whatever reason, we are setting the hotkey value to uninitialized data as we never initialize several members on the stack in this function. It just so happens that the one in the `dwHotkey` field is commonly `0x4c` or the letter `L` which is then sent into the window procedure to tell the OS to capture it as a global hotkey and foreground the `conhost.exe` that was started. We should realize the load failure and not set any hotkey at all and we should initialize the stack variables. This does both.
## Validation Steps Performed
* [x] Manual scenario running LNK file that cannot be loaded from customer report (make LNK to cmd.exe, make it inaccessible to conhost so it can't load/read it.)
* [x] Manual scenario with `mklink`'d link that makes the shortcut parser attempt to load (and fail because it isn't a LNK at all from GH-7650)
Fixes MSFT-31351620
The Windows build system doesn't support PMR yet, so we had to add a workaround. :(
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_wdx_dxp_windev 1614b27830a07484c18628ec7d9abc5f9d9b8a0b
Related work items: MSFT-31337042
This reverts commit a7d7362b95 introduced by #8803.
Reverting this commit fixes#8836 at the expense of the profile page
remembering the last Pivot selection. The
## References
#6800 - Settings UI Epic
#8803 maintained a `ProfilePageNavigationState` in `MainPage` to remember
the pivot position. However, the two-way binding on the TextBoxes
now seem to happen too late (after the navigation occurs),
resulting in the text being applied to the wrong profile. In other
words, the sequence of events probably looks something like this:
1. user types text (_state.profile = old profile)
2. user moves to new profile
3. navigation completes (_state.profile = new profile)
4. textbox two-way binding fires, setting _state.profile.WHATEVER = value
## Validation Steps Performed
Performed repro sets from #8836. Bug no longer occurs.
Reopens#8769Closes#8836
Upon a settings reload, we would select the correct navigation item for
a profile, but navigate to the old one. As a result, you would navigate
to the old page that points to a dead profile object. This would make it
appear like you did not discard/save the changes.
This bugfix navigates to the newly created profile, ensuring that your
changes are actually applied to the settings model's clone in use.
## References
#8773 - Introduced the bug
#6800 - Settings UI Epic
## Validation Steps Performed
- Navigate to "powershell" profile
- edit "tab title" value
- discard changes
Before: changes would persist unless you discarded changes again
Now: changes are discarded
Also verified expected behavior occurs when you click "save" instead of
"discard"
Moving things out of CharRow into ROW helps us hide it as an implementation detail.
This is part one of many.
### CharRow: Hide ClearCell, use ROW::ClearColumn
### CharRow: Hide GetText, use ROW::GetText
### CharRowBaseTests: remove dead file (never used!)
### CharRow: Move DoubleBytePadded into ROW
### CharRow: Move WrapForced into ROW
### Char/AttrRow: Hide Reset, use ROW::Reset
### Remove RowCellIterator (dead code)
RCI was unused; it was replaced by TextBufferCellIterator shortly after its creation
### Move AttrRowTests to ut_textbuffer from ut_host
It had no reliance on the host.
Cleans up a ton of competing and outdated sources from our NuGet.Config to improve reliability and maintainability.
## PR Checklist
* [x] Closes an overdue-to-clean mess.
* [x] I work here.
* [x] Tests covered below.
* [x] I've discussed this with @DHowett already.
## Validation Steps Performed
- [x] - NuGet restored everything I could get my hands on (all `packages.config`) in our project before and after the change.
- [x] - The build and tests still run fine. (PR automation should check this one)
A part of the #8415.
Includes:
* Moving `TabSwitcherMode` related decisions into `CommandPalette`
(simplifying the logic of `TerminalPage::SelectNextTab`)
* Fix a bug where the index of first tab switch is incorrect
(since bindings are not updated)
* Removing redundant `CommandPalette` updates
* Preparations for tabs binding
Removes the visibility hack in `UpdateSettings` where we were hiding
Profile menu items instead of removing them. This hack was removed using
`ReplaceAll`. For an unknown reason, calling `Remove()` would result in
an out-of-bounds error in XAML code.
The "Discard" button would improperly refresh the Settings UI. Both of
the bugs were caused by holding a reference to a hidden menu item then
trying to set the `SelectedItem` to that menu item.
Additionally, 9283375 adds a check for the selected item in
`SettingsNav_ItemInvoked()`. This prevents navigation to an already
selected item. This was the heuristic used by the XAML Controls Gallery.
References #6800 - Settings UI Epic
## Validation Steps Performed
(Repeated for each menu item)
1. Select the menu item
2. click "Discard changes"
3. Verify navigated to same page
Also performed repro steps for #8747 and #8748.
Closes#8747Closes#8748
This PR adds a sample monarch/peasant application. This is a type of
application where a single "Monarch" can coordinate the actions of multiple
other "Peasant" processes, as described by the specs in #7240 and #8135.
This project is intended to be a standalone sample of how the architecture would
work, without involving the entirety of the Windows Terminal build. Eventually,
this architecture will be incorporated into `wt.exe` itself, to enable scenarios
like:
* Run `wt` in the current window (#4472)
* Single Instance Mode (#2227)
For an example of this sample running, see the below GIF:
This sample operates largely by printing to the console, to help the reader
understand how it's working through its logic.
I'm doing this mostly so we can have a _committed_ sample of this type of application, kinda like how VtPipeTerm is a sample ConPTY application. It's a lot easier to understand (& build on) when there aren't any window shenanigans, settings loading, Island instantiation, or anything else that the whole of `WindowsTerminal.exe` needs
* [x] I work here
* [x] This is sample code, so I'm not shipping tests for it.
* [x] Go see the doc over in #8135
This PR Makes sure that after you save the settings, we stay on the same part of the profiles pivot. We do this by having a singleton `ProfilesNavigationState`, a bit like the color scheme one in #8799. Hence why this PR is targeting the other.
## PR Checklist
* [x] I work here
* [x] Tested manually
* [x] Fixes the first point in #8769
## Summary of the Pull Request
This PR fixes two of the components of #8765.
> * [ ] Edit a color scheme -> Hit 'apply' -> the selected color scheme resets to the first color scheme in the list (instead of the one just edited)
This was fixed by storing the navigation state as a singleton in MainPage, and having the color schemes page update the selected scheme on that singleton. That way, a subsequent navigation to the schemes page could re-use the existing state.
> * [ ] The buttons turn gray on rollover covering up what color I'm looking at (I have dark mode)
This one was tricky. We're binding the resource for this button, to the color the button is bound to. We're also running a converter on that color, as to change the alpha slightly. This allows us to still have visual feedback on pointerover, without obscuring the color entirely.
## PR Checklist
* [x] I work here
* [x] Tested manually
`til::details::bitmap<Allocator>` will use `Allocator` for its
`dynamic_bitset`, and it will use a rebound allocator for its run storage.
Allocator should be an allocator type storing `unsigned long long`, the
backing store type for `dynamic_bitset`.
I've introduced a type alias, `til::bitmap`, which papers over the
allocator choice for all existing code. I've also introduced a second
type alias, `til::pmr::bitmap`, which lets a consumer use the C++
polymorphic allocator system.
I chatted with @miniksa about whether to keep the "full" allocator
version in `details` or not. We decided that for the simplicity of the
`til` namespace, we would. If anybody has a compelling reason to use
`til::details::bitmap<Allocator>` directly, we can re-evaluate this
decision.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/2886
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Currently the tab tool tip is the tab's title.
The PR teaches the TabBase to check if there is a switch to tab command
associated with the current tab index,
if so concatenates the the relevant mapping to the too tip.
Of course, prefers user defined bindings to the default ones.
Moved tool tip logic to TabBase so SettingsTab has tooltip as well.
The following code didn't previously work as the assignment operators
didn't return a self reference:
```cpp
auto channel = til::spsc::channel<QueueItem>(100);
auto producer = std::move(channel.first);
channel.first = std::move(producer);
```
## Validation Steps Performed
I've added a basic smoke test for `til::spsc`.
Closes#8695
## Summary of the Pull Request
Two parts:
* Hide the BG image settings when no image is specified
* Add a checkbox for "Use desktop wallpaper". When that's checked, the BG image path input is hidden. Unchecking that box restores the path to what it was before.
## PR Checklist
* [x] Closes#8763
* [x] I work here
## Validation Steps Performed
Tested manually
This is by no means comprehensive. It will be unmarked as draft when it
is more comprehensive.
This pull request adds some tests for resizing a TextBuffer and
reflowing its contents. Each test takes the form of an initial state and
a number of buffers of different sizes. The initial state is used to
seed the first TextBuffer, and the subsequent buffers are only used to
compare.
I manually reimplemented some of the DBCS logic to ensure that the
buffers contain _exactly_ what they're supposed to. I know this is
non-ideal. After some of the CharRow changes in #8446 land, this will
need to be updated.
There's a cool bit of TAEF gore in here: the IDataSource. An IDataSource
allows us to programmatically return test cases. It's a code-only
version of its support for parameterized tests of the form `Data:x = {0,
1, 2}` .
The only downsides are...
1. It looks like COM (it is not using COM under the hood, just the COM
ABI)
2. Property values must be returned as strings.
To best support rich test types, I used IDataSource to produce _a lit of
array indices_ and nothing more. The test is run once for array member,
and it is the test's responsibility to look up the object to which that
index refers.
Works great though! Each reflow test is its own unit, and a failure in
an earlier reflow test will not tank a later one.
Procedural solution for https://github.com/microsoft/terminal/issues/756.
Introduces a `startupActions` global setting.
This setting is as string with the same format as actions in command line arguments.
It is used only if command line arguments were not provided
(aka running pure wt.exe).
The setting allows implicit new-tabs.
In the case of invalid syntax we show the warning dialog and ignore the setting.
The documentation PR is here: https://github.com/MicrosoftDocs/terminal/pull/217
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Adds a negative value check for when the terminal window is hidden/show in VS
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
[Bug 1265984](https://devdiv.visualstudio.com/DevDiv/_workitems/edit/1265984): [Terminal] VS crashes when clicking the hidden terminal tab
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual validation.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add checkbox for 'inherit from parent process' for starting directory
When checked, the textbox and browse button are disabled
If the starting directory is empty, the checkbox is automatically checked
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#8761
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
<img width="328" alt="pardir1" src="https://user-images.githubusercontent.com/26824113/104529798-64038980-55bf-11eb-93fd-75e6cf1e2547.png">
<img width="317" alt="pardir2" src="https://user-images.githubusercontent.com/26824113/104529803-66fe7a00-55bf-11eb-89b6-5b35c8ab89b8.png">
Sorts the list of `EnumEntry`s that is used to create combo boxes and
radio buttons in the Settings UI. `INITIALIZE_BINDABLE_ENUM_SETTING`
sorts the list in increasing order of the enum values, whereas
`INITIALIZE_BINDABLE_ENUM_SETTING_REVERSE_ORDER` does so in decreasing
order.
## References
#6800 - Settings UI Epic
I attempted sorting the `IObservableVector<EnumEntry>` using
`std::sort`, but I would get an error in
`winrt::Windows::Foundation::swap` (`C2665`). So instead, I did the
following approach:
- (unchanged) we're converting the `IMap` from EnumMappings into (1) a
map of localized strings and (2) the list for XAML controls
- instead of storing `EnumEntry`s to the `IObservableVector` directly,
store it to a `std::vector`
- sort the vector using `std::sort`
- _now_ initialize the `IObservableVector` using the sorted
`std::vector`
This uses the value of the associated enum to determine a sorting order.
Since we want the "negative" value (i.e. "none" or "hidden") to be last,
I use `EnumEntryComparator` and `EnumEntryReverseComparator` to
determine whether we want increasing or decreasing order respectively.
`INITIALIZE_BINDABLE_ENUM_SETTING_REVERSE_ORDER` is a copy of
`INITIALIZE_BINDABLE_ENUM_SETTING`, except it uses
`EnumEntryReverseComparator` to sort in decreasing order.
Closes#8758
Put some settings below the acrylic & background image settings. Those groups have controls that will become visible when the user enables the setting. If there's other controls below them, then it's less likely that the user has _exactly scrolled to the checkbox_. That means it's more likely that the newly visible controls will be on-screen.
* [x] closes one checkbox in #8764
* [x] I work here
Whenever you'd make a change to anything in the Terminal Control
project, then tried deploying the package, you'd get errors like
"Package contains two files with the same name and different content,
files are `Thing.xbf` and
`.../bin/x64/debug/TSM/TerminalControl/Thing.xbf`". It seems like
`GetPackagingOutputs` was double counting these xbfs as being both from
TerminalControl and also TSM&TSE. So if you'd change TerminalControl,
it'd change the xbf files, but not the ones in TSM/TSE, and then
eventually the wapproj would fail to put it all together.
This combination of flags seems to
* make mdmerge work
* make the packaging project work
* make a partial rebuild of TerminalControl followed by a deploy work
I'm hoping that this PR build will confirm that this works in CI as well.
## PR Checklist
* [x] Fixes this minor annoyance I've been having for the past 2 months
* [x] I work here
## Validation Steps Performed
Validated locally on VS 16.8.3. Sure to break by 16.9 🙃.
## Summary of the Pull Request
I forgot to reset the `--size` argument to `split-pane` when I added it. This PR fixes that, and adds a test so I don't regress it again.
## References
* Missed in #8543
## PR Checklist
* [x] I work here
* [x] Tests added/passed
When we display a dialog to warn the user that they are doing a
multi-line paste, we show the clipboard contents
The contents are shown in a scroll viewer with a fixed maximum height.
Closes#7997
Store the order of the bindings and upon lookup prefer the binding
that was added last.
The defaults will always "loose" to user overrides.
Closes#2991
## Summary of the Pull Request
Adds support for the `move-focus` subcommand to `wt.exe`. This subcommand works _exactly_ like `moveFocus(up|down|left|right)`.
## References
* Will surely conflict with #8183
* Is goodness even in the world where #5464 exists
## PR Checklist
* [x] Closes#6580
* [x] I work here
* [x] Tests added/passed
* [x] Docs PR: MicrosoftDocs/terminal#209
## Detailed Description of the Pull Request / Additional comments
Bear with me, I wrote this before paternity leave, so code might be a bit stale.
Oddly, after startup, this _does not_ leave the focus on the pane you moved to. If you `move-focus` during startup, at the end of startup, we'll still focus a _random_ pane. This is because the terminal still auto-focus a TermControl when it's done with layout. While we'll maintain the active control just fine during the startup, at the end of startup, all the controls will complete layout in a random order.
This is no different than the startup right now. `wt sp ; sp ; sp` will focus a random pane at the end. This is left for a future someone to fix
This is also subject to #2398 / #4692. Moving in a direction isn't _totally_ reliable currently. `focus-pane -t ID` will certainly be more reliable, but this will work in the meantime?
## Validation Steps Performed
Opened probably 100 terminals, confirmed that the layout was always correct. Final focused pane was random, but the layout was right.
## Summary of the Pull Request
This is a spec for "pane navigation", as we've already got a bit of an implementation in #8183. We've also had a heated discussion in Teams, and I wanted to capture a bit of that in a more formal doc. I suppose that "informal Teams chat" didn't work out in the end 😆.
Also, this is @PankajBhojwani's feature so I'm gonna let him drive. I mostly wrote this to test out a new spec template.
After discussion, we landed on proposal D, with a minor change of `last` to `prev`. This is how it was in #8183 before I started meddling 😝
## PR Checklist
* [x] spec for #2871
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
This is not my best spec ever - again, mostly just trying to spawn discussion, and prototype the new spec template.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR implement the OSC 9;9
|Sequence|Descriptoin|
| :------------- | :----------: |
|ESC ] 9 ; 9 ; “cwd” ST | Inform ConEmu about shell current working directory.|
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#8214
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#8166
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
- Detect `\r` when warning about multi line paste
- Translate `\n` to `\r` on paste
## PR Checklist
* [x] Closes#8601
* [x] Closes#5821
## Validation Steps Performed
Manual testing
Basically, just impose a height on both the renamer box and the overall
tab header control. However, to ensure that the text in the tab renamer
box does not get clipped by its own border, we also need to set its font
size, which is slightly smaller than it was before but it _is_ the same
as the text block that it is trying to rename so I'd say its more
consistent now.
We also improve the tab renamer box so that it scrolls as more text is
added instead of getting truncated (when the tabWidthMode is anything
other than titleLength). When the tabWidthMode _is_ set to titleLength,
the renamer box can increase in length much more (see GIFs below).
Closes#8519
Following up https://github.com/microsoft/terminal/pull/8586 by @Hegunumo,
fully remove the command dispatching logic from Command Palette.
Currently Command Palette might dispatch command in Tab Switcher mode.
This leads to several inconsistencies:
* Only the commands with the same key modifier as an ATS anchor will be issued
* This command will not close the TabSwitcher
(while commands issued from TerminalPage do).
Implementation details:
* Pass KeyMapping rather than binding to CommandPalette
* Use this mapping inside previewKeyDownHandler of ATS to detect
if previous tab or next tab bindings were engaged.
No need to handle Ctrl+Tab explicitly anymore -
it is handled as any other binding.
* Cleanup the logic in TerminalPage::_SelectNextTab
that checks if CommandPalette is visible.
It is not required anymore, as visible palette would intercept the call.
* Remove dependency of TerminalPage on AppLogic
that was introduced lately .
Adds a `Microsoft.Terminal.Remoting.dll` to our solution. This DLL will
be responsible for all the Monarch/Peasant work that's been described in
#7240 & #8135.
This PR does _not_ implement the Monarch/Peasant architecture in any
significant way. The goal of this PR is to just to establish the project
layout, and the most basic connections. This should make reviewing the
actual meat of the implementation (in a later PR) easier. It will also
give us the opportunity to include some of the basic weird things we're
doing (with `CoRegisterClass`) in the Terminal _now_, and get them
selfhosted, before building on them too much.
This PR does have windows registering the `Monarch` class with COM. When
windows are created, they'll as the Monarch if they should create a new
window or not. In this PR, the Monarch will always reply "yes, please
make a new window".
Similar to other projects in our solution, we're adding 3 projects here:
* `Microsoft.Terminal.Remoting.lib`: the actual implementation, as a
static lib.
* `Microsoft.Terminal.Remoting.dll`: The implementation linked as a DLL,
for use in `WindowsTerminal.exe`.
* `Remoting.UnitTests.dll`: A unit test dll that links with the static
lib.
There are plenty of TODOs scattered about the code. Clearly, most of
this isn't implemented yet, but I do have more WIP branches. I'm using
[`projects/5`](https://github.com/microsoft/terminal/projects/5) as my
notation for TODOs that are too small for an issue, but are part of the
whole Process Model 2.0 work.
## References
* #5000 - this is the process model megathread
* #7240 - The process model 2.0 spec.
* #8135 - the window management spec. (please review me, I have 0/3
signoffs even after the discussion we had 😢)
* #8171 - the Monarch/peasant sample. (please review me, I have 1/2)
## PR Checklist
* [x] Closes nothing, this is just infrastructure
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
In dark mode (and high contrast mode), color animation of title bar
button uses wrong color. Cause of this issue is using invalid data in
`ColorAnimation`. I fixed this bug by changing `ColorAnimation` value
in XAML layout file.
According to a [forum post], `To` value of `ColorAnimation` must be
frozen. But original source code uses "color binding" which makes this
value dynamic. As a result, the value set by default is always used,
that means, light mode.
So I added new resource named `CaptionButtonStrokeColor` and
`CaptionButtonBackgroundColor` which has static color value.
In light mode and dark mode, I set `SystemBaseHighColor` in the color
resource. `SystemBaseHighColor` is the same as
`SystemControlForegroundBaseHighBrush.Color` which is originally used in
animation.
The background color animation happened to work correctly because its
value is the same between light mode and dark mode. But I also fixed
background color animation.
## Validation Steps Performed
There is no need to add new test with this fix.
- I changed the `theme` value in `settings.json` and confirmed that the
correct color values were used.
- I confirmed that it works correctly even if the Windows theme is
changed.
[forum post]: https://social.msdn.microsoft.com/Forums/vstudio/en-US/027c364f-5d75-424f-aafd-7fb76b10b676/templatebinding-on-storyboard?forum=wpfCloses#7314
This commit makes "Open in Windows Terminal" Context menu work again for
directory background even on system that OS fix is not applied.
This is a fallback solution to OS fixes mentioned in #6414.
While OS fix is on its way, we need a fallback that works on existing OS
versions.
The approach to this is: when no item is selected (nullptr for
IShellItemArray*), we use shell api to query the path of current active
Explorer window. A special case is handled for Windows Desktop. Once
we are able to obtain the path, we launch Windows Terminal with it.
## Validation Steps Performed
1. Right click on desktop to bring up the Context menu, pick "Open in
Windows Terminal", verify that a terminal is opened with correct
initial path.
2. Open a few File Explorer windows, pick any window, navigate to a
folder, click on "Background" to bring up the context menu, click
"Open in Windows Terminal" verify that a terminal is opened with
correct initial path.
Closes#6414
## References
* Commit f273aa679d4d9fb516678fc7ed5fc6495a8e8532 from os repository.
## PR Checklist
* [x] Closes#7650
* [x] I work here.
* [x] Tests passed
## Detailed Description of the Pull Request / Additional comments
* We found and fixed this in November 2017, but I fumbled the replication and accidentally overwrote the commit. This digs it up from history and puts it back in our code.
* When the shortcut file cannot be read for whatever reason, we are setting the hotkey value to uninitialized data as we never initialize several members on the stack in this function. It just so happens that the one in the `dwHotkey` field is commonly `0x4c` or the letter `L` which is then sent into the window procedure to tell the OS to capture it as a global hotkey and foreground the `conhost.exe` that was started. We should realize the load failure and not set any hotkey at all and we should initialize the stack variables. This does both.
## Validation Steps Performed
* [x] Manual scenario running LNK file that cannot be loaded from customer report (make LNK to cmd.exe, make it inaccessible to conhost so it can't load/read it.)
* [x] Manual scenario with `mklink`'d link that makes the shortcut parser attempt to load (and fail because it isn't a LNK at all from #7650)
Converts the poly text out string and width buffers to use a memory pool since we free/alloc those every frame and are just going to reuse them over and over.
## PR Checklist
* [x] Supports #3075
* [x] I work here.
* [x] Profiled memory before/after. Tested manually with `big.txt`.
## Detailed Description of the Pull Request / Additional comments
- Sets up a PMR memory pool for the GDI Engine. It tends to alloc and free a bunch of little buffers during painting frames. The pool will likely hold onto that memory frame over frame, but we'd just be using it again and again and again anyway. So this way we avoid all the system memory allocator locks and syscalls.
## Validation Steps Performed
- Ran `big.txt` about 10x in the window. Checked WPR/WPA profile output before/after.
Make a few changes to memory usage throughout the application to reduce transient allocations from the `big.txt` test from ~213,000 to ~53,000.
## PR Checklist
* [x] Supports #3075
* [x] I work here.
* [x] Tested manually and WPR'd. Test suite should still pass.
* [x] Am core contributor
## Detailed Description of the Pull Request / Additional comments
Transient allocations are those that are new'd, used, then delete'd. Going back and forth to the system allocator for things we're just going to throw away or use rapidly again is a performance detriment. Not only is it a bunch of time to go ask the system with a syscall, it also hits a whole bunch of locks on the allocators. This PR identifies a few places where we were accidentally allocating and didn't mean to or were allocating and freeing just to turn around and allocate again. I chose other strategies to avoid this.
## Validation Steps Performed
- Ran `big.txt` sample (~6MB file) before and after. Observed heap allocations with WPR.
Performs a number of minor bugfixes related to the Settings UI:
- b5370a1 Dropdown bug:
- the dropdown would display the keybinding for the first
`openSettings` found. So it would accidentally present and bind the
one for the Settings UI.
- 91eb49e autogenerated name for opening Settings UI:
- the Settings UI keybinding would display "open settings file". This
was updated to say "Open Settings UI".
- 1cadbf4 Profile Page navigation crash:
- the selected item off of a MUX navigation view returns a MUX
NavViewItem (as opposed to WUX)
- dd2f3e5 Hookup delete for Profile page navigation:
- missed a spot where we were manually navigating to the Profile
page. So it wasn't hooked up properly
- 9fea6de Properly cast NavViewItem tags
- When we update the NavigationView's menu items, we were casting the
tags to `Model::Profile` instead of `Editor::ProfileViewModel`.
## References
#6800 - Settings UI epic
Fixes the following bug:
> - [ ] JSON change --> crash
> - open SUI --> open JSON --> edit retro effects in JSON --> save file --> cry because the app crashed
## Additional comments
This was a part of some manual testing I performed on the Settings UI.
More intricate bugs are being reported on #6800 and will be fixed in
their own PR.
Fix `TabPaletteItem` to hold only a weak reference to a tab.
This way we guarantee that the refcount of the closed tab
gets to 0 immediately
(and that command palette cannot "raise it from the dead").
While this seems a correct thing to do,
it is still not clear why the `FilteredCommand` itself
(the one holding the `TabPaletteItem`) doesn't get released
until the UI is refreshed.
There is an impact of not registering to PropertyChanged event:
if the tab title changes during Tab Switcher navigation
the Tab Switcher item won't be updated immediately
(the change will apply next time the Tab Switcher is open).
Due to this change we need to make sure that the tabs binding
in https://github.com/microsoft/terminal/pull/8427
doesn't break the title / icon update.
## Validation Steps Performed
* Manual testing
Closes#8651
Fix memory leak that occurs from not dispatching the end of sequences on all actions (since it is buffering up all characters for trace reasons.) Also don't bother storing if no one is listening.
## PR Checklist
- [x] Closes#8283
* [x] Fixes leak found while bumbling around.
* [x] I work here.
## Detailed Description of the Pull Request / Additional comments
- We trace all the things leading up to the Action phase in the VT parser for ETW tracing to make debugging the parser easier, but we made two mistakes.
- At some point, three of the actions (related to print/execute) weren't dispatching the stored up sequence to tracing and not clearing it. So printing/executing in a giant run over and over caused the vector to bloat and bloat and bloat forever.
- We're storing things even when no one is listening. That's a waste.
## Validation Steps Performed
- Watched it grow every time I did `type big.txt` under `taskman.exe`. Then watched it not do that after.
- I did technically WPR it to figure out this was the culprit.
This PR adds support for the ANSI _italic_ graphic rendition attribute,
which is enabled by the `SGR 3` escape sequence.
For the GDI renderer, I've just created an additional italic variant of
the font, and then the `UpdateDrawingBrushes` method selects the
appropriate font variant into the device context based on the requested
text attributes.
It's a bit more complicated in the DX renderer, because we need both an
italic variant of the font, and a variant of the text format object. The
`CustomTextLayout` class also had to be updated to hold the two font and
format instances, and decide which of the variants to use based on a
`useItalicFont` property in the drawing context, initially set in the
`UpdateDrawingBrushes` method.
## Validation Steps Performed
I've created some test content using a range of different character sets
(e.g. CJK, block characters, emoji, etc.), then applied the italic
attribute mixed with various other SGR attributes to see how they
interact. The output isn't always perfect, but I think it seems
reasonable given the constraints of a cell-based terminal renderer.
Closes#5461
This commit introduces direct shortcut dispatch to TerminalPage, which
allows it to respond to key bindings before the command palette.
This allows the user to use shortcuts from the command palette while
it's open.
Closes#6679
Looks like recent regression:
1. Every time the tab gains focus (e.g., upon tab switching) we trigger `TaskbarProgressChanged`
2. This call results in `HideIcon` call
3. This call resets the value of Icon even if hide=false
4. This triggers reload of the image resulting in blinking
This guide serves as a reference on how to add a setting to Windows Terminal. It covers...
- Terminal Settings Model changes
- Settings UI changes
- `TerminalSettings` changes
- Actions and action arguments
As a part of #6800 (Settings UI Follow Up Tasks)
Introduces the following UI controls to the ColorSchemes page:
- "Add new" button
- next to dropdown selector
- adds a new color scheme named ("Color Scheme #" where # is the number of color schemes you have)
- "Rename" Button
- next to the selector
- replaces the ComboBox with a TextBox and the accept/cancel buttons appear
- "Delete" button
- bottom of the page
- opens flyout, when confirmed, deletes the current color scheme and selects another one
This also adds a Delete button to the Profiles page. The Hide checkbox was moved above the Delete button.
## References
#1564 - Settings UI
#6800 - Settings UI Completion Epic
## Detailed Description of the Pull Request / Additional comments
**Color Schemes:**
- Deleting a color scheme selects another one from the list available
- Rename replaces the combobox with a textbox to allow editing
- The Add New button creates a new color scheme named "Color Scheme X" where X is the number of schemes defined
- In-box color schemes cannot be deleted
**Profile:**
- Deleting a profile selects another one from the list available
- the rename button does not exist (yet), because it needs a modification to the NavigationView's Header Template
- The delete button is disabled for in-box profiles (CMD and Windows Powershell) and dynamic profiles
## Validation Steps Performed
**Color Schemes - Add New**
✅ Creates a new color scheme named "Color Scheme X" (X being the number of color schemes)
✅ The new color scheme can be renamed/deleted/modified
**Color Schemes - Rename**
✅ You cannot rename an in-box color scheme
✅ The rename button has a tooltip
✅ Clicking the rename button replaces the combobox with a textbox
✅ Accept --> changes name
✅ Cancel --> does not change the name
✅ accepting/cancelling the rename operation updates the combo box appropriately
**Color Schemes - Delete**
✅ Clicking delete produces a flyout to confirm deletion
✅ Deleting a color scheme removes it from the list and select the one under it
✅ Deleting the last color scheme selects the last available color scheme after it's deleted
✅ In-box color schemes have the delete button disabled, and a disclaimer appears next to it
**Profile- Delete**
✅ Base layer presents a disclaimer at the top, and hides the delete button
✅ Dynamic and in-box profiles disable the delete button and show the appropriate disclaimer next to the disabled button
✅ Clicking delete produces a flyout to confirm deletion
✅ Regular profiles have a delete button that is styled appropriately
✅ Clicking the delete profile button opens a content dialog. Confirmation deletes the profile and navigates to the profile indexed under it (deleting the last one redirects to the last one)
## Demo
Refer to this post [here](https://github.com/microsoft/terminal/pull/8403#issuecomment-747545651.
Confirmation flyout demo: https://github.com/microsoft/terminal/pull/8403#issuecomment-747657842
Merely fixed the capitalization of a word.
## Detailed Description of the Pull Request / Additional comments
- Inside `doc/AddASetting.md`, on line 14, the sentence previously began with the verb "add" with a lowercase alphabet.
- I replaced "add" with "Add".
``` md
[12] ...
[13] 2. Add matching fields to Settings.hpp
[14] - Add getters, setters, the whole drill.
[15] ...
```
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
The tab tooltip is no longer empty when it was toggle zoomed.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#8199
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I was looking at conhost/OpenConsole and noticed it was being pretty
inefficient with allocations due to some usages of std::deque and
std::vector that didn't need to be done quite that way.
So this uses std::vector for the TextBuffer's storage of ROW objects,
which allows one allocation to contiguously reserve space for all the
ROWs - on Desktop this is 9001 ROW objects which means it saves 9000
allocations that the std::deque would have done. Plus it has the
benefit of increasing locality of the ROW objects since deque is going
to chase pointers more often with its data structure.
Then, within each ROW there are CharRow and ATTR_ROW objects that use
std::vector today. This changes them to use Boost's small_vector, which
is a variation of vector that allows for the so-called "small string
optimization." Since we know the typical size of these vectors, we can
pre-reserve the right number of elements directly in the
CharRow/ATTR_ROW instances, avoiding any heap allocations at all for
constructing these objects.
There are a ton of variations on this "small_vector" concept out there
in the world - this one in Boost, LLVM has one called SmallVector,
Electronic Arts' STL has a small_vector, Facebook's folly library has
one...there are a silly number of these out there. But Boost seems like
it's by far the easiest to consume in terms of integration into this
repo, the CI/CD pipeline, licensing, and stuff like that, so I went with
the boost version.
In terms of numbers, I measured the startup path of OpenConsole.exe on
my dev box for Release x64 configuration. My box is an i7-6700k @ 4
Ghz, with 32 GB RAM, not that I think machine config matters much here:
| | Allocation count | Allocated bytes | CPU usage (ms) |
| ------ | ------------------- | ------------------ | -------------- |
| Before | 29,461 | 4,984,640 | 103 |
| After | 2,459 (-91%) | 4,853,931 (-2.6%) | 96 (-7%) |
Along the way, I also fixed a dynamic initializer I happened to spot in
the registry code, and updated some docs.
## Validation Steps Performed
- Ran "runut", "runft" and "runuia" locally and confirmed results are
the same as the main branch
- Profiled the before/after numbers in the Visual Studio profiler, for
the numbers shown in the table
Co-authored-by: Austin Lamb <austinl@microsoft.com>
This commit adds a [progress ring] to the tab header when we receive an
OSC 9 sequence.
Adds an event handler in `Tab.cpp` for the event we raise when we get a
request to set the taskbar state/progress. This event handler updates
the tab header with the active control's state/progress.
When we want to show the progress ring, we hide the tab icon and place
the progress ring over it.
[progress ring]: https://docs.microsoft.com/en-us/uwp/api/Microsoft.UI.Xaml.Controls.ProgressRing?view=winui-2.4
References #6700
This commit introduces another optional text block in palette that will
be shown in the command line mode (above the history). This text block
will either contain a list of parsed command lines or a description why
the parsing failed
Closes#8344Closes#7284
N
* Change backslashes in include statements to forward slashes (CC-8205)
Dustin L. Howett
* Refactor DEC/ANSI modes to avoid duplication when we add SM/RM (GH-8469)
* Fix the xterm and SGR mouse encodings for CTRL, ALT, SHIFT (GH-8379)
James Holderness
* Fix rendering of DBCS characters when partially off screen (CC-8438)
* Correct horizontal coordinates in viewport overflow test (CC-8456)
* Correct paths in the the runut and runft test scripts (CC-8488)
* Retain horizontal viewport offset when moving to bottom (CC-8434)
* Fix out-of-bounds exceptions in Set...{Buffer,Screen}Size (CC-8309)
PankajBhojwani (1)
* Implement ConEmu's OSC 9;4 to set the taskbar progress indicator (CC-8055)
Chester Liu (1)
* Improve OSC 8 Hyperlink parsing logic (CC-7962)
Related work items: #31090459, #31090805, #31090808, #31090810
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 91dff13f6953441afe9e28bfe3da9d5bff27bb05
Related: MSFT-26196390
Related work items: #26196390
This commit replaces DeviceComm with the interface IDeviceComm and the
concrete implementation type ConDrvDeviceComm. This work is done in
preparation for different device backends.
In addition to separating out ConDrv-specific behavior, I've introduced
a "handle exchange" interface.
HANDLE EXCHANGE
---------------
There are points where we give ConDrv opaque handle identifiers to our
input buffer, output buffer and process data. The exact content of the
opaque identifier is meaningless to ConDrv: the driver's only
interaction with these identifiers is to hold onto them and send back
whichever are pertinent for each API call.
Because of that, we used the raw register-width pointer value of the
input buffer, output buffer or process data _as_ the opaque handle
value.
This works very well for ConDrv <-> conhost using the ConDrvDeviceComm.
It works less well for something like the "logging" DeviceComm that will
log packets to a file: those packets *cannot* contain pointer values (!)
To address this, and to afford flexibility to DeviceComm implementers,
I've introduced a two-member complement of handle management functions:
* `ULONG_PTR PutHandle(void*)` registers an object with the DeviceComm
and returns an opaque identifier.
* `void* GetHandle(ULONG_PTR)` takes an opaque identifier and returns
the original object.
ConDrvDeviceComm implements PutHandle and GetHandle by casting the
object pointer to the "opaque handle value", which maintains wire format
compatibility[1] with revisions of conhost prior to this change.
Simpler DeviceComm implementations that require handle tracking but
cannot bear raw pointers can implement these functions by returning an
autoincrementing ID (or similar) and registering the raw object pointer
in a mapping.
I've audited all existing handle exchanges with the driver and updated
them to use Put/GetHandle.
(I intended to add DestroyHandle, but we are not equipped for handle
removal at the moment. ConsoleHandleData/ConsoleProcessHandle are
destroyed during wait routine completion, on client disconnect, etc.
This does mean that an id<->pointer mapping will grow without bound, but
at a cost of ~8 bytes per entry and a short-lived console session I am
not too concerned about the cost.)
[1] Wire format compatibility is not required, and later we may want to
switch ConDrvDeviceComm to `EncodePointer` and `DecodePointer` just to
insulate us against a spurious ConDrv packet allowing for an arbitrary
4/8-byte read and subsequent liftoff into space.
Co-authored-by: mrange <marten_range@hotmail.com>
I loved the pixel shaders in #7058, but that PR needed a bit of polish
to be ready for ingestion. This PR is almost _exactly_ that PR, with
some small changes.
* It adds a new pre-profile setting `"experimental.pixelShaderPath"`,
which lets the user set a pixel shader to use with the Terminal.
- CHANGED FROM #7058: It does _not_ add any built-in shaders.
- CHANGED FROM #7058: it will _override_
`experimental.retroTerminalEffect`
* It adds a bunch of sample shaders in `samples/shaders`. Included:
- A NOP shader as a base to build from.
- An "invert" shader that inverts the colors, as a simple example
- An "grayscale" shader that converts all colors to grayscale, as a
simple example
- An "raster bars" shader that draws some colored bars on the screen
with a drop shadow, as a more involved example
- The original retro terminal effects, as a more involved example
- It also includes a broken shader, as an example of what heppens
when the shader fails to compile
- CHANGED FROM #7058: It does _not_ add the "retroII" shader we were
all worried about.
* When a shader fails to be found or fails to compile, we'll display an
error dialog to the user with a relevant error message.
- CHANGED FROM #7058: Originally, #7058 would display "error bars"
on the screen. I've removed that, and had the Terminal disable the
shader entirely then.
* Renames the `toggleRetroEffect` action to `toggleShaderEffect`.
(`toggleRetroEffect` is now an alias to `toggleShaderEffect`). This
action will turn the shader OR the retro effects on/off.
`toggleShaderEffect` works the way you'd expect it to, but the mental
math on _how_ is a little weird. The logic is basically:
```
useShader = shaderEffectsEnabled ?
(pixelShaderProvided ?
pixelShader :
(retroEffectEnabled ?
retroEffect : null
)
) :
null
```
and `toggleShaderEffect` toggles `shaderEffectsEnabled`.
* If you've got both a shader and retro enabled, `toggleShaderEffect`
will toggle between the shader on/off.
* If you've got a shader and retro disabled, `toggleShaderEffect` will
toggle between the shader on/off.
References #6191
References #7058Closes#7013Closes#3930 "Add setting to retro terminal shader to control blur
radius, color"
Closes#3929 "Add setting to retro terminal shader to enable drawing
scanlines"
- At this point, just roll your own version of the shader.
There are two issue with copy to clipboard when block is selected:
* We don't add new lines for lines that were wrapped
* We remove trailing whitespaces which is not intuitive in block selection.
Fixed the copy logic to always add newlines and not to remove
whitespaces when block is selected.
Even if shift is pressed!
## Detailed Description of the Pull Request / Additional comments
* Added optional parameter to `TextBuffer::GetText`
that allows to apply formatting (includeCRLF / trimming)
to lines that were wrapped
* Changed `Terminal::RetrieveSelectedTextFromBuffer`
to apply the following parameters when block is selected:
* includeCRLF = true
* trimTrailingWhitespaces = false
* apply the formatting above to all rows, including the ones
that were wrapped
## Validation Steps Performed
* Manual tests for both block and standard selection
* Copy with both right-click and command
* Added UT
Closes#6740
In conhost there is a keyboard shortcut that applies colors to the
selected range of text, and another shortcut that searches for the
selected text, and applies colors to any matching content. The former
operation doesn't work correctly when the selection is wrapped, and both
have problems when the selected text spans DBCS characters. This PR
attempts to fix those issues.
The problem with the color section was that it applied the color to a
simple rect spanning the start and end points of the selection. I've now
updated it to use the `Selection::GetSelectionRects` method, which
correctly handles a wrapped range of lines, and makes sure that double
width characters are fully covered.
The problem with the "find-and-color" operation was in the way it
obtained the search text from the selected screen cells. Since it
retrieved one cell at a time, and a DBCS character can span two cells,
that resulted in some characters being repeated in the search text. I've
now corrected that code to take the width of the characters into
account.
## Validation Steps Performed
I've manually verified that the test cases described in #8572 and #8574
are now working correctly.
Closes#8572Closes#8574
This changes the keyboard warning from a dialog to an `InfoBar`, which
we just got in MUX 2.5. Some users were unhappy that we'd always display
the dialog. We learned from the input team that this service _should_
always be enabled. We're also learing from users that they don't always
want it enabled.
We're working with the Input team to help us figure out how this service
can be disabled _and the Terminal work just fine_. They're confident
that it _shouldn't_. For 99% of our users, they're right. So we don't
want to get rid of the dialog entirely, we want to understand how this
is possible. While we wait, let's make the message less aggressive.
This is instead of making a `iKnowWhatImDoingDisableTheKeyboardWarning`
setting to disable the dialog. Props to @cornem for suggesting the less
aggressive solution.
## Validation Steps Performed
Tested manually, but by forcing the message to always display. Disabling
the service requires two full reboots, and _ain't nobody got time for
that_.
Closes#8228Closes#4448, for now
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
It is maybe not the best way since I had to get all the cases for key handling so I just created for each of them. As a result the code get longer(not optimized). Most difficult thing was Next tab and Previous tab I just could not solve it.
### 9 commands that couldn't enabled > <
1. Increase font size -> could not find VirtualKey for "-"
2. Decrease font size -> could not find VirtualKey for "+"
3. Split pane, split:horizontal -> could not find VirtualKey for "-"
4. Split pane, split:vertical -> could not find VirtualKey for "+"
5. Open default settings -> could not find VirtualKey for ","
6. Open settings file -> could not find VirtualKey for ","
7. Open new tab dropdown -> could not resolve keybindings
8. Next tab -> could not resolve keybindings
9. Previous tab -> could not resolve keybindings
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6679
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This commit iontroduces another `target` to the `openSettings` binding:
`settingsUI`. It opens the settings UI introduced in the previous
commit.
Closes#1564Closes#8048 (PR)
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Leon Liang <lelian@microsoft.com>
This commit introduces the terminal settings editor (to wit: the
Settings UI) as a standalone project. This project, and this commit, is
the result of two and a half months of work.
TSE started as a hackathon project in the Microsoft 2020 Hackathon, and
from there it's grown to be a bona-fide graphical settings editor.
There is a lot of xaml data binding in here, a number of views and a
number of view models, and a bunch of paradigms that we've been
reviewing and testing out and designing and refining.
Specified in #6720, #8269
Follow-up work in #6800Closes#1564Closes#8048 (PR)
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Kayla Cinnamon <cinnamon@microsoft.com>
Co-authored-by: Alberto Medina Gutierrez <almedina@microsoft.com>
Co-authored-by: John Grandle <jograndl@microsoft.com>
Co-authored-by: xerootg <xerootg@users.noreply.github.com>
Co-authored-by: Scott <sarmiger1@gmail.com>
Co-authored-by: Vineeth Thomas Alex <vineeththomasalex@gmail.com>
Co-authored-by: Leon Liang <lelian@microsoft.com>
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Signed-off-by: Dustin L. Howett <duhowett@microsoft.com>
This commit is an amalgamation of some of the TSM changes in PR #8048.
It:
* Introduces CascadiaSettings.CreateNewProfile to add a new profile
* Introduces CascadiaSettings.ProfileDefaults, which returns the
"defaults" object as a profile
* Fixes the font weight deserializer to work on uint16_ts
* Fixes a property getter in ColorScheme to not be a property getter
* Fixes a reserialization error with default profiles
* Sets a default icon for all profiles (to the C:\ Segoe MDL2 icon)
This PR defines a series of `NOSOMETHING` macros in PCHs, in order to
prevent `windows.h` from bringing a lot of rarely used things into the
project.
Theoretically this should make PCH generation and overall complication
faster, but I didn't really benchmark the speed.
Another benefit would be reducing the symbol noises caused by
`windows.h`.
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/7916
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Upon tab close the tabview is responsible to issue tab selection for the next active tab.
However this doesn't happen when tabview is hidden.
There was a special treatment for this scenario for full screen mode.
Added the same treatment to focus mode (as the tabview is not visible in this case as well).
## Validation Steps Performed
Manual tests
Adds a "move to previous pane" and "move to next pane" keybinding, which
navigates to the last/first focused pane
We assign pane IDs on creation and maintain a vector of active pane IDs
in MRU order. Navigating panes by MRU then requires specifying which
pane ID we want to focus.
From our offline discussion (thanks @zadjii-msft for the concise
description):
> For the record, the full spec I'm imagining is:
>
> { command": { "action": "focus(Next|Prev)Pane", "order": "inOrder"|"mru", "useSwitcher": true|false } },
>
> and order defaults to mru, and useSwitcher will default to true, when
> there is a switcher. So
>
> { command": { "action": "focusNextPane" } },
> { command": { "action": "focusNextPane", "order": "mru" } },
>
> these are the same action. (but right now we don't support the order
> param)
>
> Then there'll be another PR for "focusPane(target=id)"
>
> Then a third PR for "focus(Next|Prev)Pane(order=inOrder)"
> for the record, I prefer this approach over the "one action to rule
> them all" version with both target and order/direction as params,
> because I don't like the confusion of what happens if there's both
> target and order/direction provided.
References #1000Closes#2871
I added `enum class` to one thing and decided that that was quite enough
before disabling the `enum class` warning.
Looks like 16.8 made more map/vector operations noexcept, so we have to
re-annotate to remain compliant.
There's a handful of small changes in these updates:
The Win32 Toolkit is now built with CFG (I think), and
the VCRT forwarders are now the (second) non-RC version.
First step towards #8415:
* Introduce `PaletteItem` and derive from it to provide native support
for tabs and command lines (`ActionPaletteItem` / `TabPaletteItem`,
`CommandLinePaltteItem`)
* Remove business logic behind PaletteItem from palette (aka dispatch
commands and preview tabs externally)
So the implementation is somewhat dirty.
The ideas was nice - add lostFocusHandler
However it broke few things:
* In the TabSwitcher the ListItem must be focusable since otherwise
the SingleSelectionMode behavior breaks.
To address this I had to put the lostFocusHandler on the items as well
* When you click the flyout, the palette loses focus,
which makes the terminal page to set the focus on the tab, closing the flyout.
To address this I had to ensure the tab won't get focused once the flyout is open.
In addition, flyout should fix the focus before opening,
otherwise alt+tab will put a focus on a tab row rather than on tab
* I also had to close the palette if the tab order changes.
To prevent inconsistencies.
Closes#8355
A bunch of our feature tests don't work reliably in CI. They rely on
creating a new `OpenConsole.exe` window, then running the test _in that
console_. As a part of that test setup, the test runner used to wait a
second to attach to the newly created console. Then the test goes on
it's merry way, assuming the console is ready to go. However, in CI,
that might take more than a second. If it does, then the test would fail
pretty immediately, as soon as it tries to get at the buffer of the new
console.
This PR introduces a little retry loop to the test init. After attaching
to the new console, we'll try and get at the screen buffer. If that
fails, we'll wait a second and try again. We'll try 5 times total,
before bailing entirely. Hopefully, this should mitigate most of the
random CI failures we get in the feature tests.
Closes#8495
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR adds shortcut action so that users can scroll.
I used `UINT16_MAX` for `rowsToScroll`.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7542
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
In my #8489 we want to use boost's small_vector type, but that PR is
kinda messy by adding boost and also making a meaningful change. So
here I'm splitting out the boost addition to its own PR so that one can
be more focused on the allocation improvement and consumption of boost.
Have you ever wanted to debug the Terminal, but weren't sure which of
your Terminal windows was the one you needed to attach to? Now you don't
need to worry! Simply execute the `breakIntoDebugger` action, and the
Terminal will `DebugBreak()` for you!
This requires that the user has set `"debugFeatures": true`
Validated by adding a command:
{
"command": "breakIntoDebugger",
"keys": "ctrl+alt+shift+f1",
"name": "DebugBreak()"
},
...and verifying that it pops open the post-mortem debugger (windbg).
This commit moves us to the Xaml prerelease (201202003) that is
equivalent to public stable release 2.5.
Remember, we need to use prereleases for some silly reason.
There were some minor annoyances with the WPF projects.
1. WpfTerminalTestNetCore was in an unnecessary same-named subdirectory
2. The build started throwing deprecation warnings because `netcoreapp3.0` is not LTS and is going away.
This is the same root cause as #8485. We moved the output of a bunch
of projects to be unified. We forgot to update all the test scripts.
In this case, the LocalTests were still using the old path that's
_not_ under `bin/`
When the renderer is called on to render part of a line starting halfway
through a DBCS character (as can occur in conhost when the viewport is
offset horizontally), it could result in the character not being
displayed, and/or with following the characters drawn in the wrong
place. This PR is an attempt to fix those problems.
The original code for handling the trailing half of fullwidth glyphs was
introduced in PR #4668 to fix issue #2191.
When the content being rendered starts with the trailing half of a DBCS
character, the renderer tries to move the `screenPoint` back a position,
so it can instead render the full character, but instructing the render
engine to trim off the left half of it.
If the X position was already in column 0, though, it would instead move
forward one position, intending to skip that character. At best this
would mean the half character wouldn't be rendered, but since the
iterator wasn't incremented correctly, it actually just ended up
rendering the character in the wrong place.
The fix for this was simply to drop the check for the X position being
in column 0, and allow it go negative. The rendering engine would then
just start rendering the character partially off screen, and only the
second half of it would be displayed, which is exactly what is needed.
The second problem was that the code incrementing the iterator was using
the `columnCount` variable rather than the `it->Columns()` value for the
current position. When dealing with the trailing half of a DBCS
character, the `columnCount` is 2, but the `Columns()` value is 1. If
you use the former rather than the later, then the renderer may skip the
following character.
## Validation Steps Performed
I've developed a more easily reproducible version of the test case
described in #8390, and confirmed that the problem no longer occurs when
this PR is applied.
I've also manually confirmed that the problem described in #2191 that
was fixed by PR #4668 is still working correctly now.
Closes#8390
When resizing the buffer in the `SetConsoleScreenBufferSize` and
`SetConsoleScreenBufferInfoEx` APIs, we have tests in place to make sure
that the resize doesn't result in the viewport extending past the bottom
or right of the buffer (since that can eventually result in exceptions
being thrown). Unfortunately these tests were using the wrong X
coordinate, so they failed to detect an overflow along the horizontal
axis. This PR corrects that mistake.
PR #8309 was where the overflow detection was initially added.
The original code was using the `Viewport::EndExclusive` method to
determine the extent of the viewport, mistakenly thinking that it
returned the bottom right coordinates (it actually returns the left
coordinate). So I've now added a `BottomRightExclusive` method to the
`Viewport` class, that actually does return the coordinates we need, and
have updated the overflow tests to use that method instead.
## Validation Steps Performed
I've manually confirmed that the test case is issue #8453 is no longer
throwing an exception.
Closes#8453
I was about to add `SetAnsiMode`/`ResetAnsiMode` for `SM` and `RM` when I
realized that we probably don't need yet another enum of mode types, set and
reset functions, and a mode helper for ANSI standard modes when we already have
one for DEC Private modes.
This commit:
1. Changes the enum `PrivateModeParams` to just be `ModeParams`
2. Differentiates ANSI Standard modes (IRM, KAM, SRM, ...) from DEC
Private modes (DECCOLM, DECCKM, ...) using a flag bit set in the enum
value.
3. Introduces a helper class for constructing these values much like
`VTID`. That helper takes a bitmask and applies it to an input to
produce the final enum value.
4. Dispatches all mode set/reset through a common Set/Reset and
`_ModeHelper` that uses the existing enum values.
[1] These modes are in separate namespaces with some overlap. We want to
differentiate them at dispatch time to ensure that `\e[2h` and `\e[?2h` are
given different treatment, and ensure that `\e[1000h` doesn't activate xterm
mouse mode.
Fixes#8457.
This corrects the path to `Terminal.Core.Unit.Tests.dll` in the `runut`
unit test script and makes the `runft` feature test script capable of
working with _Release_ builds as well as _Debug_ builds.
The path to `Terminal.Core.Unit.Tests.dll` changed when the project was
restructured, and the `runut` script was never updated to reflect that
change. That has now been corrected.
And the `runft` script used to be hard coded to look for tests in the
_Debug_ directory, but it has now been updated to use the
`%_LAST_BUILD_CONF%` environment variable, so it should work for both
_Debug_ and _Release_ builds.
## Validation Steps Performed
I've manually confirmed that the `runut` and `runft` scripts now work as
expected.
Closes#8485
This PR improves the clipboard handling logic of "drag and drop" in
TermControl, making it more useful and less likely to crash.
* Added support for two more categories of content, `ApplicationLink`
and `WebLink`.
* Reordered the ifs, making `StorageItem` the last clause. With WT being
a text-oriented application, I think we can safely assume that the
content being pasted is likely to be text/links.
* Catch possible exceptions during
`e.DataView().GetStorageItemsAsync()`.
Closes#7804
`backgroundImageAlignment` is exposed as 1 setting in the JSON, but
stored as two separate settings (`HorizontalAlignment` and
`VerticalAlignment`). This PR introduces `ConvergedAlignment` as a flag
enum that can be a combination of horizontal and vertical Alignments.
TSM now solely uses this `ConvergedAlignment`, and TerminalSettings
performs a conversion from this new enum to the traditional
`HorizontalAlignment` and `VerticalAlignment` for consumption.
## Validation Steps Performed
Manually tested changing the `backgroundImageAlignment` in my
settings.json and checking if the image updated appropriately.
Show a validation warning when someone sets a `setColorScheme` action
with an invalid scheme
In the setting validation phase, scan all commands for all the "set
color scheme" actions, and check each of them has a valid scheme. If any
of them has an invalid scheme name, raise a warning. Do not check
iterable commands that will be expanded to valid color schemes.
## Validation Steps Performed
- Added tests to LocalTests_SettingsModel
- Manual tests, add commands to settings.json with invalid color scheme
and check the warning pops up. Try simple and nested commands.
Closes#7221
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8421
* [x] CLA signed.
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
Skip further computations if:
* The list is empty
* No item is selected and we press "up" key
(we do want to handle "down" key for CommandLineMode)
## Validation Steps Performed
* Manual testing + UT
## Summary of the Pull Request
I think we all agree that the current spec template doesn't always work. I
thought this layout might be better for the kinds of settings discussions we
have (more and more frequently now).
This is largely for discussion with the team - if there are other things we want
added, changed, or if we just want to merge this in with the primary spec
template, I'm all ears.
## References
* An example of using this spec: #8375
The Settings UI exposes the `profiles.defaults` (PD) object. Today, we
remove PD if there's nothing in it. However, that causes problems with
the Settings UI, because we have no `Profile` object to bind to
(resulting in a crash). Rather than making the Settings UI create a PD,
and link it in the inheritance tree, it's much easier to just _always_
create and link the PD object.
## References
#1564 - Settings UI (fixes a crash for this)
#7923 - Introduces inheritance
## PR Checklist
* [X] Tests added/passed
## Validation Steps Performed
* [x] repro steps for crash in Settings UI (copied changes over to that
branch for testing)
* [x] tests passed
This fixes the issue with the settings UI where clicking the browse
buttons would cause an exception to be thrown when we tried to display a
picker without an originating HWND.
It turns out that pickers need a hosting/parent window, and Xaml Islands
doesn't furnish us with a CoreWindow that's set up for that use case.
Alas!
Raymond Chen's [blog post on the matter] suggests that we should
hand the HWND off through some classic COM interface. To do that
properly, Terminal's various components need to implement that interface
and propagate the HWND down where it's needed.
Thanks to a [Xaml compiler issue], we can't actually do that. To work
around that, we've begged and borrowed different methods for pushing
HWNDs around:
1. Using IInitializeWithWindow in secret
2. A member that takes a uint64
3. An interface that offers a function that will "wire up" the HWND.
I chose (1) because AppHost can implement IInitializeWithWindow, but
TerminalPage cannot. We're just pretending that TerminalPage _can_.
I chose (2) because none of the Xaml types in TerminalSettingsEditor can
implement the interface thanks to the aforementioned compiler issue, but
we don't have an escape hatch like AppHost that lives in the same module
and can help us do the propagation.
I chose (3) because I didn't want to commit the same sin as (2) _seven
times_ for every different type of settings page that exists. (3) is
backed by "IHostedInWindow", and anybody who knows they have to use
IInitializeWithWindow to tie an HWND to an object can call
IHostedInWindow.TryPropagateHostingWindow() on that object.
House of cards.
[Xaml compiler issue]: https://github.com/microsoft/microsoft-ui-xaml/issues/3331
[blog post on the matter]: https://devblogs.microsoft.com/oldnewthing/20190412-00/?p=102413
(cherry picked from commit f9fc9861a1)
When the viewport is moved to the "virtual bottom" of the buffer (via
the `MoveToBottom` method), it is important that the horizontal viewport
offset be left as it is, otherwise that can result in some undesirable
side effects.
Since the VT coordinate system is relative to the top of the viewport,
many VT operations call the `MoveToBottom` method to make sure the
viewport is correctly positioned before proceeding. There is no need for
the horizontal position to be adjusted, though, since the X coordinates
are not constrained by the viewport, but are instead relative to the
underlying buffer.
Setting the viewport X coordinate to 0 in `MoveToBottom` (as we were
previously doing) could result in the cursor being pushed off screen.
And if the operation itself was moving the cursor, that would then
trigger another viewport move to bring the cursor back into view. These
conflicting movements meant the viewport was always forced as far left
as possible, and could also result in cursor "droppings" as the cursor
lost track of where it had been.
I've now fixed this by updating the `GetVirtualViewport` method to match
the horizontal offset of the active viewport, instead of having the X
coordinate hardcoded to 0.
## Validation Steps Performed
I've manually confirmed that this fixes the cursor "droppings" test case
reported in issue #8213.
I've also added a screen buffer test that makes sure the `MoveToBottom`
method is working as expected, and not changing the horizontal viewport
offset when it moves down.
Closes#8213
If we try set a very long title, "rename box" UI changes max height,
corrupting the layout. There are several ways to fix it, e.g. by
limiting the MaxHeight (e.g. by binding it to the actual height of the
title bar).
However, I went for the most straightforward approach - truncating. I
don't think we should allow long titles (though it can be a nice hidden
storage 😊)
I considered to truncate it to the tab header width, but we can actually
see more data in tab-switcher, so I simply went for a hard-coded value
which should be large enough.
If this approach makes sense we need to consider updating the
documentation.
Closes#8428
We had the xterm and SGR codings for meta/ctrl backwards. Oops.
This commit also fixes an observed issue in Windows Terminal where we
were passing in a console-style modifiers enum when MouseInput is
expecting MK_ constants.
I decided to unify MouseInput around the console-style modifier
constants because they have support for META (which MK_ does not) and
can differentiate between left/right alt/ctrl.
Our tests are fundamentally flawed here: they use a copy of the
modifier key generating logic _themselves_, so we got a bit of "error
carried forward."
I did not fix the tests to use known-good control sequences, I simply
replaced the character generator with another copy of the modifier code.
I did, however, extend them to test ctrl|meta and left/right modifiers.
Fixes#8291
Fix for #8365
Adds a `_renameCancelled` bool that determines whether we raise the event for a title change. We do this because the lost focus handler for the rename box will be called _both_ when the renamer is dismissed by clicking somewhere else and by pressing enter/escape. So, the lost focus handler needs to conditionally raise the event.
Closes#8365
## Summary of the Pull Request
Introduces a new command called `moveTab`
This command has a single mandatory argument with values of `forward` and `backward`
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/3593
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated here: https://github.com/MicrosoftDocs/terminal/pull/198
* [x] Schema updated
* [x] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
Went for the straightforward solution of moving the tab and the tabViewItem.
## Validation Steps Performed
* Manual testing
Many include statements use forward slashes, while others use backwards
slashes. This is inconsistent formatting. For this reason, I changed the
backward slashes to forward slashes since that is the standard.
## Summary of the Pull Request
Add a history to command palette in the command line mode.
Few considerations/limitations
1. In-memory, 10 entries hard-coded
2. MRU
3. List rather than set
4. The user needs explicitly select command from the history
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/8296
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated - irrelevant
* [ ] Schema updated - irrelevant
* [ ] I've discussed this with core contributors already.
## Validation Steps Performed
* Manual testing
The CloseWarningDialog is now "awaitable"/async, as suggested in PR #7871.
As opening the dialog is async, the flag can be reset in the same
method. This way the flag operations occur in the same method. The
event handlers of the buttons became obsolete and are removed.
## Validation Steps Performed
Tested manually.
## Summary of the Pull Request
Does what the title says. Now while you're building terminal projects,
the taskbar will show indeterminate progress. If the build fails, it'll
blink the error state for 500ms before returning to normal.
## References
* Made possible by #8055 _and viewers like you_
## PR Checklist
* [x] scratches an itch I've had since at least 2018
* [x] I work here
* [x] this is a build script
## Validation Steps Performed
tested manually
* Add a tabColor parameter to the `new-tab` and `split-panes` command
* Add --tabColor to the command line, to allow bootstrapping with tabs
of different colors
Add another field to NewTerminalArgs. Use this field to set
StartingTabColor in Terminal. This color gets overridden by the color
defined by the profile / VT, however can be overridden with the color
picker.
Since the color is the property of the Terminal, when defined for the
tab this color is associated only with the first pane/terminal of the
tab. Additional panes will not inherit this color (to prevent advanced
resolution, where we need to resolve between the inherited color and the
one specified for the pane).
## Validation Steps Performed
* UT for parameters parsing
* Running system with several tabs of different colors.
* Adding custom actions with colors
* Performing operations like split pane, duplicate and so on
Closes#8075
One of our test files has some raw Emoji in it. I expect that as time
goes by, more and more files will have UTF-8 in them.
Fixes MSFT-30289536
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp d828ae0f6c209259019934711c587ea075eab77e
[Git2Git] Git Train: Merge of building/rs_onecore_dep_uxp/201117-2002 into official/rs_onecore_dep_uxp Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 526043ab6050397506b3cdb77e6a43b5ca9a2e9a
Related work items: MSFT-29990377
The terminal taskbar icon can now flash when the BEL sequence is
emitted, to let the user know something needs their attention.
The `BellStyle` setting can now be set to `audible`, `visual` or both or
none. When the pane receives a BEL event and the `bellStyle` includes
`visual`, we bubble the event up all the way to `AppHost` to handle
flashing the taskbar.
Closes#1608
This commit implements the OSC 9;4 sequence per the [ConEmu style].
| sequence | description |
| ------------ | ------------ |
| `ESC ] 9 ; 4 ; st ; pr ST` | Set progress state on taskbar and tab. |
| | When `st` is: |
| | |
| | `0`: remove progress. |
| | `1`: set progress value to `pr` (number, 0-100). |
| | `2`: set the taskbar to the "Error" state |
| | `3`: set the taskbar to the "Indeterminate" state |
| | `4`: set the taskbar to the "Warning" state |
We've also extended this with:
* st 3: set indeterminate state
* st 4: set paused state
We handle multiple tabs sending the sequence by using the the last focused
control's taskbar state/progress.
Upon receiving the sequence in `TerminalApi`, we send an event that gets caught
by `TerminalPage`. `TerminalPage` then fires another event that gets caught by
`AppHost` and that's where we set the taskbar progress.
Closes#3004
[ConEmu style]: https://conemu.github.io/en/AnsiEscapeCodes.html#ConEmu_specific_OSC
Currently when implicit tab command is specified (i.e., we have
parameters for new-tab, but don't have the explicit subcommand name) we
fallback to parsing the entire arg list as new tab command.
However, if we also have a launch profile (or anything else that might in
the future belong to the upper scope) it is passed as a parameter to the
new tab command, failing the parsing.
The idea behind my solution is to run the parser as a prefix command -
i.e., as long as we succeed to parse [options] / [subcommand] we will
parse them (populating the fields like a launch mode), but once we will
discover something unfamiliar, like profile, we will know that the
prefix is over and will handle the remaining suffix as a new tab
command.
## Validation Steps Performed
* UT added
* Manual run of different options
Closes#7318
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This sets the tab close button color to match the tab text color.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#8046
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#8046
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #8046
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
This sets the tab close button color to match the tab text color.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Test light theme white tab mouse hover effect:
Test dark theme white tab mouse hover effect:
This fixes a number of exceptions that can cause conhost to crash when
the buffer is resized in such a way that the viewport or cursor position
end up out of bounds.
Technically this is a fix for issue #256, although that has been closed
as "needs-repro".
The main fix was to add checks in the `SetConsoleScreenBufferSizeImpl`
and `SetConsoleScreenBufferInfoExImpl` methods, to make sure the
viewport doesn't extend past the bottom or right of the buffer after a
resize. If it has overflowed, we move the viewport back up or left until
it's back within the buffer boundaries. We also check if the cursor
position has ended up out of bounds, and if so, clamp it back inside the
buffer.
The `SCREEN_INFORMATION::SetViewport` was also a source of viewport
overflow problems, because it was mistakenly using inclusive coordinates
in its range checks, which resulted in them being off by one. That has
now been corrected to use exclusive coordinates.
Finally, the `IsCursorDoubleWidth` method was incorrectly marked as
`noexcept`, which was preventing its exceptions from being caught.
Ideally it shouldn't be throwing exceptions at all any more, but I've
removed the `noexcept` specifier, so if it does throw an exception,
it'll at least have more chance of recovering without a crash.
## Validation Steps Performed
I put together a few test cases (based on the reports in issues #276 and
#1976) which consistently caused conhost to crash, or to generate an
exception visible in the debug output. With this PR applied, those test
cases are no longer crashing or triggering exceptions.
Closes#1976
## Summary of the Pull Request
This adds `ToJson` functions to `Profile`, `GlobalAppSettings`, and `ColorScheme`. They are used in `CascadiaSettings` to completely serialize an instance of the settings model. Thanks to #7923, all of the settings are `std::optional`, and `JsonUtils` only writes out values that are actually populated.
`CascadiaSettings::WriteSettingsToDisk` serializes the current settings and writes them to the settings.json. A backup file is created with your old contents.
#### Limitations:
- all of the color schemes are serialized regardless of them coming from defaults.json or settings.json
- keybindings/actions are copied/pasted
## References
#1564 - Settings UI
TSM Specs (#6904 and #7876)
## PR Checklist
* [x] Tests added/passed
Fixes the clear button to clear the typed command not clickable in the
command palette.
- From the primary investigation it looked like the `TextBlock` element
introduced in #7935 was somehow blocking (appearing on top of) the
clear button.
- It was also blocking the command palette input field from being able
to access which was preventing the text in the input field from being
selected and the cursor would still show as `pointer` cursor instead
of a `text selection` cursor
- Adding `HorizontalAlignment="Left"` property to the above-mentioned
`TextBlock` element fixed the issue.
## Validation Steps Performed
- Created the Dev build for `x64` in Visual Studio and verified the
functionality manually.
Closes#8220
Some sources files changes were necessary to retain build continuity in OS.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 7ff895ff770838526b6d1d9e7d582f3c1e36d85b
Fixes https parsing of the latest version of `profiles.schema.json`, particularly by VS Code Intellisense.
* [x] Closes#8249
The VS Code parsing warning below is a known and unrelated existing issue due to VS Code only supporting JSON Schema Draft 7. It does not prevent Intellisense from functioning.
> Draft 2019-09 schemas are not yet fully supported.
## Validation Steps Performed
Manually tested and successfully validated by fixing a local copy of `profiles.schema.json` and defining it as `$schema` in `settings.json`
conhost and windows terminal
renamed files; updated script to do summary output only, also quiet mode and option file path for output (else stdout)
added -quiet and fixed -summaryonly parameters
added hyperlink directly to soruce implementation for conhost and terminal seqs
Update doc/reference/master-sequence-list.csv
Co-Authored-By: James Holderness <j4_james@hotmail.com>
Apply suggestions from code review
Co-Authored-By: James Holderness <j4_james@hotmail.com>
Co-authored-by: James Holderness <j4_james@hotmail.com>
Until now, we relied on WM_SIZING to ensure that the island is not
downsized below minimal allowed dimensions. However, on some occasions
WM_WINDOWPOSCHANGED, e.g. when anchoring a window to the top/bottom of
the screen. This message will use dimensions obtained from
WM_GETMINMAXINFO. Until now we didn't override this value, falling back
to the defaults. As a result we got an inconsistent behavior (at least
when attaching the anchor).
I added logic very similar to the one we use in IslandWindow::_OnSizing
to the MINMAXINFO handler: snap the client area, add non client
exclusive are, consider DPI along the computation.
## Validation Steps Performed
* Manual testing of minimizing, maximizing, resizing, attaching
different anchors, etc.
Closes#8026
There are two code paths for Ctrl+Tab and for everything else:
Ctrl + Tab is working perfectly
* On the first tab navigation TerminalPage::_SelectNextTab resets the
tab commands, and since palette is not visible selects the relevant
tab index
* On the second navigation Ctrl+Tab is intercepted by
CommandPalette::_previewKeyDownHandler and everything works fine
But with custom binding things are screwed:
* On the first tab navigation TerminalPage::_SelectNextTab resets the
tab commands, and since palette is not visible selects the relevant
tab index
* On the second navigation keys are not intercepted and thus
TerminalPage::_SelectNextTab is called again. It resets the commands,
but now since the palette is visible we simply invoke
CommandPalette::SelectNextItem. Which in turn misbehaves because no
item is selected.
The approach for the solution is not to reset anything if the command
palette is already open.
## Validation Steps Performed
* Manual testing of both custom and non-custom bindings with different
amount of tabs.
Closes#8247
* Run all images through ImgBot (CC-8169)
* Fix potential over/underflow as noted by "TODO:" comment (CC-8081)
* Fix garbling when copying multibyte text via OSC 52 (CC-7870)
* UIA: throw E_FAIL for out-of-bounds text (CC-8052)
* Consider the GlyphWidth when calculate the postion of matched word in URL detecting (CC-8124)
* Make the link underline less obtrusive; don't use it for pattern (GH-8148)
* Fully regenerate CodepointWidthDetector from Unicode 13.0 (GH-8035)
* Prepare for the primary branch name to change to main (GH-7985)
* Hash the URI as part of the hyperlink ID (GH-7940)
* Introduce til::presorted_static_map (GH-7640)
* Prevent leftover cursor fragments when scrolling in PowerShell (CC-8173)
* Add support for the DECREQTPARM report (CC-7939)
* Refactor VT parameter handling (CC-7799)
* Add support for the "blink" graphic rendition attribute (CC-7490)
* Combine the parsing & dispatch blocks for OSC actions (CC-8202)
* Add support for autodetecting URLs and making hyperlinks (CC-7691)
* Copy _currentHyperlinkId when copying the buffer (CC-8074)
* Fix the "visual representation" optimization for hyperlinks (CC-7738)
* Optimize the binary size of the XOrg color table (CC-7929)
* Add support for more OSC color formats (CC-7578)
Related work items: MSFT-30259074
In `ActionOscDispatch()` in `OutputStateMachineEngine.cpp`, we had a
section for parsing and another section for dispatching. This PR
combines those two blocks since they do not need to be distinct.
## Validation Steps Performed
TerminalApiTests still pass
Display a warning message when the DirectX renderer resolves a font that
isn't the one you selected to warn that it couldn't be found.
Also I wrote the dialog event chain out of `TermControl` to be reusable
in the future for other messages the control might want to tell a host
about and various levels.
## Validation Steps Performed
- Manual validation, setting bad font name, fixing font name with
`settings.json`.
Closes#1017
Fixed potential errors caused by overflow or underfow in
SectionInput.cpp
## PR Checklist
* [x] CLA signed
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
In selectionInput.cpp, there is both a potential overflow and potential
underflow. To address this issue, I casted the calculation up to int,
which is then checked because of integer promotion. Underflow and
underflow is therefore impossible because now if the calculation exceeds
SHORT_MAX, it will have exceeded bufferSize.BottomInclusive() or
bufferSize.Top() anyway, and be set to them.
## Validation Steps Performed
Passed Unit Testing
Manual Validation
Some UTs crash with access violation, that occurs during pane animation.
The reason for this is a race, upon which the pane is closed (set to
nullptr) before the parent is animated. Added a simple check against
null. Doubt it can happen in production, yet worth taking care!
The JsonUtils changes in #8018 revealed that we need more robust,
configurable optional handling. We learned that there's a class of
values that was previously underrepresented in our API: _strings that
have an explicit empty value_.
The Settings model supports starting directory, icon, background image
et al values that are empty. That emptiness _overrides_ a value set in a
lower layer, so it is not sufficient to represent the empty value for
any one of those fields as an unset optional.
There are a couple other settings for which we've implemented a
hand-rolled option type (for roughly the same reason): foreground,
background, any color fields that override values from the color scheme
_or_ the lower layer profile.
These requirements are best fulfilled by better optional support in
JsonUtils. Where the library would originally detect known types of
optional and pre-filter them out during `GetValue` and `SetValue`, it
will now defer to another conversion trait.
This commit introduces a helper conversion trait and an "option oracle".
The conversion trait will use the option oracle to detect emptiness,
generate empty option values, and read values out of option types. In so
doing, the trait is insulated from the implementation details of any
specific option type.
Any special logic for handling JSON null and option types has been
stripped from GetValue. Due to this, there is an express change in
behavior for some converters:
* `GetValue<T>(jsonNull)` where `T` is **not** an option type[1] has
been upgraded from a silent no-op to an exception.
Further, I took the opportunity to replace NullableSetting with
std::optional<std::optional<T>>, which accurately represents "setting
that the user might explicitly clear". I've added a test to
JsonUtilsTests to make sure it can serialize/deserialize double
optionals the way we expect it to.
Tests (Local, Unit for TerminalApp/SettingsModel):
Summary: Total=140, Passed=140, Failed=0, Blocked=0, Not Run=0, Skipped=0
[1]: Explicitly, if `T` is not an option type _and the converter does
not support null_.
I am still not sure what is the full set of scenarios that the problem
might occur, but for me it occurred for an "old" cloud shell account,
and didn't reproduce since I have reconfigured it. These behavior might
be explained by the fact that "preferred shell type" did not exist in
the API originally and thus was not set. In such case, Terminal
succeeds to retrieve to the settings but then crashes when reading the
missing field. To fix it, I handle the case where the field is missing
and fallback to PowerShell.
## Validation Steps Performed
* Tested manually, only once.
Closes#7056
In introduced a bug in #8185, due to which Command Palette sorts items
alphabetically in the tab switcher mode. This PR fixes it.
Validation:
Created tabs with different names and verified that the MRU order is
preserved
Closes#8185
By adding these target Inputs/Outputs to TestHostApp's AfterBuild, we
can ensure that new versions of the test libraries are properly
detected. No longer will we have to delete them from disk and rebuild
TestHostApp and hope that it picks up the latest test binaries.
Oh, and I turned on a couple other optimizations (hard links, skipping
unchanged files) that were really just low-hanging fruit.
* Created a ViewModel class in the Command Palette called
FilteredCommand, aggregating the Command, the filter and the
highlighted presentation of the command name
* This ListView of the filtered commands is bound to the vector of
FilteredCommands
* Introduced HighlightedTextControl user control with HighlightedText
view model
* Added this control to the ListView Item's grid
* Bound the FilteredCommand's highlighted command name to the user
control
## Validation Steps Performed
* UT for matching algorithm
* Only manual tests
* Searching in CommandLine, SwitchTab and Nested Command modes
* Checking for bot matching an non matching filters
* Dogfooding
Closes#6646
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Proto-extensions spec
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Is documentation
* [x] I work here
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
There are certain cursor movement operations (in conhost) that can
result in "ghost" cursor instances being left behind, if the move causes
the viewport to scroll while the cursor is blinking off. Pressing enter
in a PowerShell prompt when at the bottom of the screen was one example
of this. This PR fixes that problem.
Whenever the cursor renders with an `InvertRect`, the affected areas of
the screen are saved in the `cursorInvertRects` variable. If the screen
is then scrolled while the cursor is visible, those rects are
"uninverted" in the `GdiEngine::ScrollFrame` method before the scrolling
takes place.
When the cursor has blinked off, though, the `GdiEngine::PaintCursor`
method won't set the `cursorInvertRects` variable, but it also doesn't
clear it. So if the screen is scrolled at that point, the `ScrollFrame`
method tries to "uninvert" the area where the cursor had previously been
painted. And since the cursor is no longer there, this has the opposite
effect, leaving an unwanted mark on the screen.
I've fixed this by clearing the `cursorInvertRects` at the start of the
paint cycle, in the the `GdiEngine::PaintBackground` method. Since this
occurs after the `ScrollFrame` step, it still allows for legitimate
cursor instances to be cleaned up when scrolling, but makes sure that
the variable will be cleared for the next cycle if the cursor is no
longer visible.
## Validation Steps Performed
I've manually verified that I no longer see ghost cursor fragments when
scrolling in PowerShell.
Closes#804
## Summary of the Pull Request
Changes the way the `useTabSwitcher` setting works. It now accepts either a boolean or a string:
* `true`, `"mru"`: Use the tab switcher with MRU tab switching
* `"inOrder"`: Use the tab switcher, with in-order tab switching
* `false`, `"disabled"`: Don't use the tab switcher. Tabs will switch in-order.
This is following the discussion chronicled in #8025, as well as the follow-up investigation in that thread.
## References
* #7952 introduced MRU tab switching
## PR Checklist
* [x] Closes#8025 - there's also discussion of using a parameter in an action to override this setting, but that should get punted to a follow-up task
* [x] I work here
* [x] Tests added/passed - YOU BET THEY WERE
* [ ] Requires documentation to be updated
## Validation Steps Performed
I've been switching tabs all day and all night, with different settings values, and hot-reloading the setting.
I also _ran the test_ I added.
This commit adds functionality so that users can move back from sub menu
whenever they want. As a result, users no longer have to close command
palette and open it again to get all commands again.
Closes#7910
## Summary of the Pull Request
When we get a serialization error, we "catch" it in `AppLogic` and only
`LoadDefaults()`. Since `LoadDefaults()` doesn't perform a full
validation of `CascadiaSettings`, we need to manually update our list of
active profiles (similar to how we manually resolve the default
profile).
## Validation Steps Performed
Repro steps fixed:
1. add deserialization error to settings.json (i.e. "fontWeight": "wumbo")
2. launch WT
3. verify that dropdown is populated with active profiles
Closes#8146
## Summary of the Pull Request
With this PR, the Terminal will check to make sure the "Touch, Keyboard and Handwriting Panel Service" is enabled at startup. If it isn't, then the Terminal won't be able to receive keyboard input (see #4448 and the 20 linked issues to that one).
## References
* See #4448 for more details
## PR Checklist
* [x] Closes#7886
* [ ] Should this make #4448 not-open as well?
* [x] I work here
* [n/a] Tests added/passed
* [x] Docs: https://github.com/MicrosoftDocs/terminal/pull/168
## Validation Steps Performed
I manually set the service to "Disabled", restarted the machine, verified the dialog opens (and that I'm unable to type in the Terminal), then re-set the service to automatic and rebooted, and the dialog doesn't appear.
Let's not just disable the `on` rules for the linter, let's just remove
it entirely. The way it's set up now, you'll get an email every time you
push to a PR, because GitHub fails to find any time to run the linter.
* [x] I work here
* [x] Follow-up to #8152
In preparation for the Settings UI, we needed to make some changes to
Tab to abstract out shared, common functionality between different types
of tab. This is the result of that work. All code references to the
settings have been removed or reverted.
Contains changes from #8053, #7802.
The messages below only make sense in the context of the Settings UI,
which this pull request does not bring in. They do, however, provide
valuable information.
From #7802 (@leonMSFT):
> This PR's goal was to add an option to the `OpenSettings` keybinding to
> open the Settings UI in a tab. In order to implement that, a couple of
> changes had to be made to `Tab`, specifically:
>
> - Introduce a tab interface named `ITab`
> - Create/Rename two new Tab classes that implement `ITab` called
> `SettingsTab` and `TerminalTab`
>
From #8053:
> `TerminalTab` and `SettingsTab` share some implementation details. The
> close submenu introduced in #7728 is a good example of functionality
> that is consistent across all tabs. This PR transforms `ITab` from an
> interface, into an [unsealed runtime class] to de-duplicate some
> functionality. Most of the logic from `SettingsTab` was moved there
> because I expect the default behavior of a tab to resemble the
> `SettingsTab` over a `TerminalTab`.
>
> ## References
> Verified that Close submenu work was transferred over (#7728, #7961, #8010).
>
> ## Validation Steps Performed
> Check close submenu on first/last tab when multiple tabs are open.
>
> Closes#7969
>
> [unsealed runtime class]: https://docs.microsoft.com/en-us/uwp/midl-3/intro#base-classes
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Leon Liang <lelian@microsoft.com>
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
This pull request switches up the treatment we use for pattern-detected
links and OSC 8 hyperlinks:
* Links generated via OSC 8 have a sparse dotted underline instead of a
thick dashed one
* Links generated by pattern detection _are not underlined until they've
hovered_
* This papers over a visual glitch that is a result of us updating
the pattern matches every ~500ms (on change)
Closes#8123
Turns out there's an actual way to specify C++17 for MSBuild purposes
besides just passing the compile flag.
## References
* Future C++20 support (modules)
## PR Checklist
* [x] Closes random fact found while exploring VS16.8 preview C++20
modules.
* [x] I work here.
* [x] It still builds.
## Detailed Description of the Pull Request / Additional comments
* We've been setting C++17 with just the flag passed to the compiler
`cl.exe`. But it turns out that this particular `LanguageStandard`
option will need to be set appropriately one day for us to use C++20
modules (as evidenced by the latest VS16.8 preview that I tried out to
explore modules.) The `AdditionalOption` alone isn't enough to ensure
that modules can be "seen" by other projects after production, but
`LanguageStandard` is (and will set the compiler option as appropriate
as well as whatever internal goo that MSBuild needs to hook up other
stuff.)
## Validation Steps Performed
* Built with it changed.
Fix#8121
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
When calculating the position of the matched pattern, consider the width of the characters.
However, if there are some wide glyphs in the detected hyperlink(not possible for now, for the existing regex will not match wide-character?). The repeated character in the tooltip is not fixed by this PR.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes#8121
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
When calculating the coordinate of the match in #7691, it simply uses the `prefix.size()` as the total prefix width on the screen.
This PR fixes that behavior.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manually Verified
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
In the focus mode the top border disappears upon resize. While this behavior is expected in the maximized / full screen mode, it should not happen in the focus mode.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/7012
* [x] CLA signed
* [ ] Tests added/passed - nope, only manual testing
* [ ] Documentation updated - irrelevant
* [ ] Schema updated - irrelevant
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
_GetTopBorderHeight method returns 0 when maximized or no title bar is visible. However the existence of top border has nothing to do with whether the title bar is visible. We want to leave the border as long as the window is not in some form of maximizing (maximized / full screen)
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
* Manual - dragging, resizing, maximizing both in focus and non focus modes + full screen testing
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes https://github.com/microsoft/terminal/issues/7996
* [x] CLA signed.
* [ ] Documentation updated - irrelevant
* [ ] Schema updated - irrelevant
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Currently the value of AlwaysOnTop is read by the AppHost from AppLogic that takes this value from the root TerminalPage. However at this stage neither AppLogic nor TerminalPage are initialized, and thus the return value is always false.
This PR introduces a "GetInitialAlwaysOnTop" method to AppLogic that returns a value that is configured in the settings.
In addition, the TerminalPage creation was fixed to read the configuration value upon creation (and not just after settings reload).
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
* Only manual testing
* Starting the system with both initial value set to true and false
* Verifying that dynamic toggling on / off is not affected
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
A second close command (middle click on taskbar preview) overrides the warning dialog and closes the application.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7451
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
When a close command is invoked (middle click on taskbar preview or 'X' button), a new flag is set. When the user wants to close again (this time only via the taskbar preview, as the 'X' button is disabled), the application is closed. If the user cancels the dialog, the flag is reset to prevent accidental closing on a subsequent close command.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I am developing with a [Windows 10 virtual machine](https://developer.microsoft.com/en-us/windows/downloads/virtual-machines/) provided by Microsoft. I tested manually. I considered the 'X' button, middle click on taskbar preview, and Alt+F4. Only a middle click on the taskbar preview does override the dialog.
Fire and forget on the hyperlink handler inside the TermControl.
## PR Checklist
* [x] Closes#7994
* [x] Tested manually
* [x] Hi, I work here.
## Detailed Description of the Pull Request / Additional comments
In `TermControl`, `_HyperlinkHandler` is called by
`_PointerPressedHandler` which has taken a write lock for all its
friends. However, `_HyperlinkHandler` downstreams to `ShellExecute`
which can pump the message queue looking for something. That pumping of
the queue can trigger messages that also want the write lock to update
state. They get stuck. Everything hangs.
`_HyperlinkHandler` really only needs read lock and really only for as
long as it takes to fill up its parameters before it's invoked... but
the simpler and more contained solution is to just fire and forget the
rest of the method that causes the deadlock to a continuation at the
tail of the dispatcher queue so `_PointerPressedHandler` can complete
and naturally drop the write lock.
## Validation Steps Performed
- Launched `main` manually on my box and clicked the hyperlink that is
detected when Powershell starts and it froze.
- Launched this change manually on my box and clicked the hyperlink that
is detected when Powershell starts and it did not freeze.
This pull request switches us to the new WinDev scaleset agent pool. It
should be faster than the hosted pool, and the larger disks allow us to
get rid of our PCH cleanup step.
This pull request is the initial implementation of hyperlink auto
detection
Overall design:
- Upon startup, TerminalCore gives the TextBuffer some patterns it
should know about
- Whenever something in the viewport changes (i.e. text
output/scrolling), TerminalControl tells TerminalCore (through a
throttled function for performance) to retrieve the visible pattern
locations from the TextBuffer
- When the renderer encounters a region that is associated with a
pattern, it paints that region differently
References #5001Closes#574
All our JSON files are _actually_ JSONC files - json with comments.
A well-behaved application that accepts JSON should accept and ignore
comments. However, `jsonlint` is not a well behaved application in this
regard.
So, to prevent the linter from complaining about our JSON comments, we
need to disable it entirely. THAT'S RIGHT, there's not a setting to
allow JSONC.
See #8076 as an example of this working.
This will also unblock #7462.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Realized that we don't copy the current hyperlink id when we copy buffers, quick fix for that
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I work here
## Summary of the Pull Request
This PR replaces `CascadiaSettings::_profiles` with...
- `_allProfiles`: the list of all available profiles in the settings model (i.e. settings.json, dynamic profiles, etc...)
- `_activeProfiles`: the list of all non-hidden profiles (used for the new tab dropdown)
## References
#8018: maintaining a list of all profiles allows us to serialize hidden profiles
#1564: Settings UI can link to `AllProfiles()` instead of `ActiveProfiles()` to expose hidden profiles
## PR Checklist
* [x] Closes#4139
* [x] Tests added/passed
## Validation Steps Performed
Deploy and testing succeeded
C++/WinRT added a feature where it will detect a mismatch in some of its
build flags.
Because we build XAML projects and non-XAML projects, and try to link
them together in static libraries, we need those flags to always match.
C++/WinRT only respects this flag when `DEBUG` is set, so our CI missed
this.
With thanks to @carlos-zamora for letting me build/test/commit this on
his computer.
This commit introduces 8 more variants of the .ICO file, embeds the
right ones into WindowsTerminal.exe, and adds code that will select the
most appropriate icon at runtime.
Since we're a Centennial application, the "application" icon inside our
package isn't used by the shell for the taskbar thumbnails or the
Alt-Tab window.
To quote J. Tippet,
> I believe there are two possible fixes:
>
> 1. Fix the OS shell to prefer the MRT icon instead of preferring the
> win32 icon
> 2. Add alternate versions of /res/terminal.ico
> The 1st fix is clearly better, since it benefits any hybrid app. But
> the 2nd fix is much easier, since it'd just take about an hour to gin up
> a new .ico file and hack the .RC file to refer to it when building the
> preview flavor.
... and to quote Michael Ratanapintha,
> Basically, if your MSIX-packaged desktop app's image resources are
> separate files or even separate MSIX packages, they may be loaded by
> MRT. If they're embedded in the .exe, they're the old-fashioned Win32
> resources Mr. Tippet is referring to.
This is the "2nd fix."
Fixes#6777
Co-authored-by: Jeffrey Tippet <jtippet@ntdev.microsoft.com>
This commit fixes our longstanding build artifact output issues and
finally unifies all C++ project output into bin/ and obj/.
In light of that, I've removed NoOutputRedirection.
I've also updated WTU and U8U16Test to use our common build props and
fixed any warnings/compilation errors that popped out.
I validated this change by running repeated incremental builds after
changing individual .cpp files in many of our C++/WinRT projects.
While not explicitly permitted, a wide range of software (including
Windows' own touch keyboard) sets the `wScan` member of the `KEYBDINPUT`
structure to 0, resulting in `scanCode` being 0 as well. In these
situations we'll now use the `vkey` to get a `scanCode`.
Validation
----------
* AutoHotkey
* Use a keyboard layout with `AltGr` key
* Execute the following script:
```ahk
#NoEnv
#Warn
SendMode Input
SetWorkingDir %A_ScriptDir%
<^>!8::SendInput {Raw}»
```
* Press `AltGr+8` while the Terminal is in the foreground
* Ensure » is being echoed ✔️
* PowerToys
* Add a `Ctrl+I -> ↑ (up arrow)` keyboard shortcut
* Press `Ctrl+I` while the Terminal is in the foreground
* Ensure the shell history is being navigated backwards ✔️
* Windows Touch Keyboard
* Right-click or tap and hold the taskbar and select "Show touch
keyboard" button
* Open touch keyboard
* Ensure keyboard works like a regular keyboard ✔️
* Ensure unicode characters are echoed on the Terminal as well (except
for Emojis) ✔️Closes#7438Closes#7495Closes#7843
This commit also adds an override UCD and migrates all of the overrides
from GetQuickCharWidth into it.
GetQuickCharWidth
-----------------
The removal of overrides from GQCW reduces the number of comparisons
required for looking up a single character's width from 41 (32
individual ranged comparisons from GQCW + 8+1 from the binary search in
CPWD) to 11 (2 from GQCW, 8+1 from CPWD).
GQCW also incorrectly marked 67 reserved codepoints as `Wide` when they
should have been `Narrow`.
The codepoints whose definitions have changed from `Wide` to `Narrow` are:
```
2E9A 2EF4 2EF5 2EF6 2EF7 2EF8 2EF9 2EFA 2EFB 2EFC 2EFD 2EFE 2EFF 2FD6
2FD7 2FD8 2FD9 2FDA 2FDB 2FDC 2FDD 2FDE 2FDF 2FE0 2FE1 2FE2 2FE3 2FE4
2FE5 2FE6 2FE7 2FE8 2FE9 2FEA 2FEB 2FEC 2FED 2FEE 2FEF 2FFC 2FFD 2FFE
2FFF 31E4 31E5 31E6 31E7 31E8 31E9 31EA 31EB 31EC 31ED 31EE 31EF 321F
A48D A48E A48F FE1A FE1B FE1C FE1D FE1E FE1F FE53 FE67
```
All of them are reserved, but those reserved regions are marked as narrow
in the UCD.
This change also offers us the chance to document exactly why we're
overriding a specific character range. Comments from the override
document will be copied to the generated CPWD table.
New in Unicode 13.0
------------------
Some widths have changed due to previously-reserved characters becoming
_used_ such as U+32FF SQUARE ERA NAME REIWA, the Tangut components
756-768, the entire Khitan Small Script character set, and the Tangut
Ideographs.
A number of the changes in this diff are due to better/worse comment
tracking and the removal of the Emoji/EPres comments. The script once
mistakenly applied comments to packed regions (and it has been updated
to not do so.)
Validation
----------
I build a test application that compared codepoints 0-FFFF for GQCW
against their new registered widths.
## Summary of the Pull Request
Introduces `IInheritable` as an interface that helps move cascading settings into the Terminal Settings Model. `GlobalAppSettings` and `Profile` both are now `IInheritable`. `CascadiaSettings` was updated to `CreateChild()` for globals and each profile when we are loading the JSON data.
IInheritable does most of the heavy lifting. It introduces a two new macros and the interface. The macros help implement the fallback functionality for nullable and non-nullable settings.
## References
#7876 - Spec Addendum
#6904 - TSM Spec
#1564 - Settings UI
#7876 - `Copy()` needs to be updated to include _parent
Close the tab context menu when clicking on the title bar
## Detailed Description of the Pull Request / Additional comments
Following #2438, hide the tabs context menu on `TerminalPage::TitlebarClicked()`.
We don't know which of the tabs is showing the context menu, do it on all tabs.
## Validation Steps Performed
Open the context menu from any tab, click on title bar and see the context menu disappear.
Closes#7988
We are getting some watson crash reports that the terminal is attempting
to resize to `(0, 0)`. This change makes it so that we prevent such
resizing and if so, throw an exception before we reach native code.
This commit adds resizing checks that prevent resizing the terminal WPF
control to a size of `(0, 0)`
- The number of lines to move upon scroll up scroll down can be defined
in ScrollUp and ScrollDown commands (parameter is called
"rowsToScroll").
- If the number are not provided, use the system default (the one we are
using for mouse scrolls), rather than 1 line.
## Validation Steps Performed
* Manual testing
* Added custom bindings for scroll commands with different values,
verified they and the default appear and behave as expected
* Checked that invalid values are not allowed
Closes#5078
This introduces an addendum to the Terminal Settings Model spec that
covers inheritance and fallback. Basically, settings objects will now
have a reference to a parent object. If the settings object does not
have a setting defined, it will ask its parent to resolve the value. A
parent is set using the `Clone()` function. `Copy()` is used to copy the
value and structure of the settings model, whereas `Clone()` is used to
copy a reference to the settings model and build an inheritance tree.
## References
#6904 - Terminal Settings Model Spec
#1564 - Settings UI
This PR resolves an issue I observed in
Microsoft.Terminal.Wpf.TerminalControl.CalculateMargins(). Specifically,
on line 194 in the project. In this example, the line: `height =
controlSize.Height - (this.TerminalRendererSize.Height /
dpiScale.DpiScaleX);` is associating the height margin with
dpiScale.DpiScaleX instead of dpiScale.DpiScaleY. This PR changes the
association to DpiScaleY.
Closes#8038
The intent of this PR is to resolve the dependency errors reported in
#7931. The Types project has been added as a reference to the
FuzzWrapper project, which fixes the unresolved dependency errors
reported.
For validation steps, I:
1.) Pulled down main.
2.) Rebuilt the FuzzWrapper project and observed the unresolved
dependency errors keeping it from building successfully.
3.) Added a project reference to the Types project.
4.) Rebuilt the FuzzWrapper project and verified that the dependency
errors disappeared.
Closes#7931.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
Adds the color slider to the tab color picker
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#7948
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] ~Tests added/passed~
* [ ] ~Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx~
* [ ] ~Schema updated.~
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #7948
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
*Not required*
We wrap the call to `_WriteSettings` in
`CascadiaSettingsSerialization.cpp` in a try/catch block, and if we
catch an error we append a warning telling the user to check the
permissions on their settings file.
Closes#7727
Our build pipeline was originally set up such that we could take any
binaries from the Terminal build and seamlessly re-package them with the
release or preview livery. My initial plan was to stamp a stable and
preview build at the same time, out of the same bits, to make ring
promotion easier.
I've never done that. For the last five releases, we've just re-cut a
new stable build along with the new preview build, usually because we
want to backport some fixes to stable.
This commit introduces preprocessor defines, detectable through CL and
RC, for any project that wants them. Right now, that's just going to be
WindowsTerminal.vcxproj (since it hosts the icons and the app entry
point). This list may be extended to include wt (the shim executable)
and the shell extension at some future date.
This will greatly simplify the logic in #7971, as we'll no longer need
to detect if we're dev or preview at runtime. It may also simplify the
logic in the shell extension for determining whether we're Dev or not.
## Summary of the Pull Request
Fixes the bug where `exit`ing inside a closed pane would leave the Terminal blank.
Additionally, removes `Tab::GetRootElement` and replaces it with the _observable_ `Tab::Content`. This should be more resilient in the future.
Also adds some tests, though admittedly not for this exact scenario. This scenario requires a cooperating TerminalConnection that I can drive for the sake of testing, and _ain't nobody got time for that_.
## References
* Introduced in #6989
## PR Checklist
* [x] Closes#7252
* [x] I work here
* [x] Tests added/passed 🎉
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
From notes I had left in `Tab.cpp` while I was working on this:
```
OKAY I see what's happening here the ActivePaneChanged Handler in TerminalPage
doesn't re-attach the tab content to the tree, it just updates the title of the
window.
So when the pane is `exit`ed, the pane's control is removed and re-attached to
the parent grid, which _isn't in the XAML tree_. And no one can go tell the
TerminalPage that it needs to re set up the tab content again.
The Page _manually_ does this in a few places, when various pane actions are
about to take place, it'll unzoom. It would be way easier if the Tab could just
manage the content of the page.
Or if the Tab just had a Content that was observable, that when that changed,
the page would auto readjust. That does sound like a LOT of work though.
```
## Validation Steps Performed
Opened panes, closed panes, exited panes, zoomed panes, moved focus between panes, panes, panes, panes
## Summary of the Pull Request
Just deleting an unnecessary call to `_UpdateCommandsForPalette`
**Note:** This only fixes slowdown when opening/closing a tab, but not upon first startup (we still need to call `_UpdateCommandsForPalette` there
## References
Fixes the slowdown described in #7820 for opening and closing tabs, but doesn't improve startup time dramatically.
## Validation Steps Performed
Tested with ~100 profiles in my settings file
This PR changes the ATS display order to _always_ be in most recently
used (MRU) order. I chose not to give ATS the option to be displayed
in-order because that order is better served through the traditional
left-right TabRow switching.
_Note_: `TabSearch` will stay in-order.
This means that users can only choose one order or another in their
`nextTab/prevTab` bindings. Setting `useTabSwitcher` to true will make
nT/pT open the ATS in MRU order. If it's set to false, the ATS won't
open and nT/pT will simply go left and right on the TabRow.
I'm open to getting rid of the global and making ATS its own keybinding,
but for now I figured I would keep the current behavior and open the PR
to get eyes on the code that doesn't have anything to do with the
settings.
Closes#973
Let's assume the user has bound the dead key ^ to a sendInput command
that sends "b". If the user presses the two keys ^a it'll produce "bâ",
despite us marking the key event as handled. We can use `ToUnicodeEx`
to clear such dead keys from the keyboard state and should make use of
that for keybindings. Unfortunately `SetKeyboardState` cannot be used
for this purpose as it doesn't clear the dead key state.
Validation
* Enabled a German keyboard layout
* Added the following two keybindings:
{ "command": { "action": "sendInput", "input": "x" }, "keys": "q" },
{ "command": { "action": "sendInput", "input": "b" }, "keys": "^" }
* Pressed the following keys → ensured that the given text is printed:
* q → x
* ´ → nothing
* a → á
* ^ → b
* a → a (previously this would print: â)
* ´ → nothing
* ^ → b
* a → a (unfortunately we cannot specifically clear only ^)
Closes#5784
Updates the GH Action and makes a small update to the README to test
changes.
A missing install step for Windows Terminal using Scoop has been added.
The versioning of Super-Linter was also switched to v3 to allow
auto-updates within the v3 series. This can be version-pinned again if a
breaking change comes later. The current updates fix some bugs and bump
the linters utilized.
## Validation Steps Performed
Validation will be shown in the build steps.
Closes#7934
Fix for crash occurring when splitting a pane, due to tab context menu created multiple times.
## References
#7728
## PR Checklist
* [x] Closes#7941
* [x] CLA signed.
## Detailed Description of the Pull Request / Additional comments
When splitting panes the `Tab::Initialize` function is called again. This rebuilt the context menu from scratch and appended the existing Close... sub-menu items to a new parent, thus causing the crash.
It is not necessary to re-create the context menu every time you split panes, it can be created only once.
## Validation Steps Performed
Manual verification:
- Play with the context menu, the Close... submenu is functioning
- Split panes (ALT + New tab), no crash occurs and context menu still functioning
## Summary of the Pull Request
This implements the `Copy` function for `CascadiaSettings`. Copy performs a deep copy of a `CascadiaSettings` object. This is needed for data binding in the Terminal Settings Editor.
The `Copy` function was basically implemented in every settings model object. This was mostly just repetitive work.
## References
#7667 - TSM
#1564 - Settings UI
## PR Checklist
* [X] Tests added/passed
It turns out that we missed part of the OSC 8 spec which indicated that
_hyperlinks with the same ID but different URIs are logically distinct._
> Character cells that have the same target URI and the same nonempty id
> are always underlined together on mouseover.
> The same id is only used for connecting character cells whose URIs is
> also the same. Character cells pointing to different URIs should never
> be underlined together when hovering over.
This pull request fixes that oversight by appending the (hashed) URI to
the generated ID.
When Terminal receives one of these links over ConPTY, it will hash the
URL a second time and therefore append a second hashed ID. This is taken
as an acceptable cost.
Fixes#7698
This commit adds a missing conversion utf8 to utf16 in decoding base64
for handling multibyte text in copying via OSC 52.
## Validation Steps Performed
* automatically
* Tests w/ multibyte characters
* manually
* case1
* Executed `printf "\x1b]52;;%s\x1b\\" "$(printf '👍👍🏻👍🏼👍🏽👍🏾👍🏿' | base64)"`
* Verified `👍👍🏻👍🏼👍🏽👍🏾👍🏿` in my clipboard
* case2
* Copied `👍👍🏻👍🏼👍🏽👍🏾👍🏿` by tmux 2.6 default copy function (OSC 52)
* Verified `👍👍🏻👍🏼👍🏽👍🏾👍🏿` in my clipboard
Closes#7819
This optimizes the binary size of the xorg color table by replacing the
static lookup table with a table of variable colors (indexed "" (0)
through "4"), calculated greys for gr[ae]y0-100, and a table of the
remaining unsuffixed colors.
78 variable colors ...
8 bytes each for pointer+size
5 variants, 4 bytes each for the color data
718 bytes for 0-terminated color names
plus
84 colors ...
8 bytes each for pointer+size
4 bytes each for the color data
955 bytes for 8-terminated color names
2902 = (78 * 8) + (78 * 5 * 4) + 718
+ 1963 = (84 * 8) + (84 * 4) + 955
------
4865 bytes (approximately)
"I couldn't sleep at night thinking that after years of accusing Windows
being bloated and literally making it even more bloated with my hands.
So here you go. The mediocre yet working solution. This reduces the
binary size to 1051k (1067k before) while keeping the code maintainable
for human beings."
VsCode uses `>` as its "prefix" for the equivalent of their "action
mode". This PR aligns the Terminal with their logic here.
We have to be tricky - if we use the `>` in the actual input as the
indicator for action mode, we can't display any placeholder text in the
input to tell users to type a command. This wasn't an issue for the
commandline mode previously, because we'd stick the "prompt" in the "no
matches text" space. However, we can't do that for action mode. Instead,
we'll stick a floating text block over the input box, and when the
user's in action mode, we'll manually place a `>` into that space. When
the user backspaces the `>`, we'll remove it from that block, and switch
into commandline mode.
## Validation Steps Performed
Played with the cmdpal in lots of different modes, this finally feels
good
Closes#7736
This PR adds support for the `DECREQTPARM` (Request Terminal Parameters)
escape sequence, which was originally used on the VT100 terminal to
report the serial communication parameters. Modern terminal emulators
simply hardcode the reported values for backward compatibility.
The `DECREQTPARM` sequence has one parameter, which was originally used
to tell the terminal whether it was permitted to send unsolicited
reports or not. However, since we have no reason to send an unsolicited
report, we don't need to keep track of that state, but the permission
parameter does still determine the value of the first parameter in the
response.
The response parameters are as follows:
| Parameter | Value | Meaning |
| ---------------- | ------ | ------------------------ |
| response type | 2 or 3 | unsolicited or solicited |
| parity | 1 | no parity |
| data bits | 1 | 8 bits per character |
| transmit speed | 128 | 38400 baud |
| receive speed | 128 | 38400 baud |
| clock multiplier | 1 | |
| flags | 0 | |
There is some variation in the baud rate reported by modern terminal
emulators, and 9600 baud seems to be a little more common than 38400
baud, but I thought the higher speed was probably more appropriate,
especially since that's also the value reported by XTerm.
## Validation Steps Performed
I've added a couple of adapter and output engine tests to verify that
the sequence is dispatched correctly, and the expected responses are
generated. I've also manually tested in Vttest and confirmed that we now
pass the `DECREQTPARM` test in the _Test of terminal reports_.
Closes#7852
Adds a new setting, `bellStyle`, to be able to disable the audible bell
added in #7679. Currently, this setting accepts two values:
* `audible`: play a noise on a bell
* `none`: Don't play a noise.
In the future, we can add a `"bellStyle": "visible"` for flashing the
Terminal instead of making a noise on bell.
## Validation Steps Performed
Pressing <kbd>Ctrl+G</kbd> in cmd, and hitting enter is an easy way of
triggering a bell. I set the setting to `none`, and presto, the bell
stopped.
Closes#2360
This commit is in support of WTU.
I initially added support for a new flag, `PSEUDOCONSOLE_UNDOCKED_PREFER_INBOX_CONHOST`,
which I liked because it was more explicit. We chose not to go that route.
### Automatic fallback
#### Pros
* It's easier on the consumer
* We can eventually expand it to support `$ARCH/openconsole.exe`
#### Cons
* Packaging the project wrong will result in a working-but-somewhat-broken experience (old conhost)
* We ameliorated this by checking it in the packaging script.
* Implicit behavior may be bad
Terminal ships with this dependency embedded, and it is not required that you install it separately. Since the link is broken, let's just remove it entirely.
* [x] fixes#7889
* [x] related to https://github.com/microsoft/terminal/issues/7917#issuecomment-707955335
* [x] I work here
* [x] is a docs update
Additionally, update the markdown linter rules in the wake of #7637, because apparently that was never actually applied to any files, so now the onus is on the first person to touch any of our markdown files.
This PR introduces a pair of classes for managing VT parameters that
automatically handle range checking and default fallback values, so the
individual operations don't have to do that validation themselves. In
addition to simplifying the code, this fixes a few cases where we were
mishandling missing or extraneous parameters, and adds support for
parameter sequences on commands that couldn't previously handle them.
This PR also sets a limit on the number of parameters allowed, to help
thwart DoS memory consumption attacks.
## References
* The new parameter class also introduces the concept of an
omitted/default parameter which is not necessarily zero, which is a
prerequisite for addressing issue #4417.
## Detailed Description of the Pull Request / Additional comments
There are two new classes provide by this PR: a `VTParameter` class,
similar in function to a `std::optional<size_t>`, which holds an
individual parameter (which may be an omitted/default value); and a
`VTParameters` class, similar in function to `gsl:span<VTParameter>`,
which holds a sequence of those parameters.
Where `VTParameter` differs from `std::optional` is with the inclusion
of two cast operators. There is a `size_t` cast that interprets omitted
and zero values as 1 (the expected behaviour for most numeric
parameters). And there is a generic cast, for use with the enum
parameter types, which interprets omitted values as 0 (the expected
behaviour for most selective parameters).
The advantage of `VTParameters` class is that it has an `at` method that
can never fail - out of range values simply return the a default
`VTParameter` instance (this is standard behaviour in VT terminals). It
also has a `size` method that will always return a minimum count of 1,
since an empty parameter list is typically the equivalent of a single
"default" parameter, so this guarantees you'll get at least one value
when iterating over the list with `size()`.
For cases where we just need to call the same dispatch method for every
parameter, there is a helper `for_each` method, which repeatedly calls a
given predicate function with each value in the sequence. It also
collates the returned success values to determine the overall result of
the sequence. As with the `size` method, this will always make at least
one call, so it correctly handles empty sequences.
With those two classes in place, we could get rid of all the parameter
validation and default handling code in the `OutputStateMachineEngine`.
We now just use the `VTParameters::at` method to grab a parameter and
typically pass it straight to the appropriate dispatch method, letting
the cast operators automatically handle the assignment of default
values. Occasionally we might need a `value_or` call to specify a
non-standard default value, but those cases are fairly rare.
In some case the `OutputStateMachineEngine` was also checking whether
parameters values were in range, but for the most part this shouldn't
have been necessary, since that is something the dispatch classes would
already have been doing themselves (in the few cases that they weren't,
I've now updated them to do so).
I've also updated the `InputStateMachineEngine` in a similar way to the
`OutputStateMachineEngine`, getting rid of a few of the parameter
extraction methods, and simplifying other parts of the implementation.
It's not as clean a replacement as the output engine, but there are
still benefits in using the new classes.
## Validation Steps Performed
For the most part I haven't had to alter existing tests other than
accounting for changes to the API. There were a couple of tests I needed
to drop because they were checking for failure cases which shouldn't
have been failing (unexpected parameters should never be an error), or
testing output engine validation that is no longer handled at that
level.
I've added a few new tests to cover operations that take sequences of
selective parameters (`ED`, `EL`, `TBC`, `SM`, and `RM`). And I've
extended the cursor movement tests to make sure those operations can
handle extraneous parameters that weren't expected. I've also added a
test to verify that the state machine will correctly ignore parameters
beyond the maximum 32 parameter count limit.
I've also manual confirmed that the various test cases given in issues
#2101 are now working as expected.
Closes#2101
## Summary of the Pull Request
Added watch on desktopImagePath to check when the path equals "DesktopWallpaper"
If it does equal "DesktopWallpaper" it replaces the path with a path to the desktop's wallpaper
*I am a student and this is my first pull request for Terminal so please give feedback no matter how small. It's the best way I can learn.
## PR Checklist
* [X] Closes#7295
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [?] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: https://github.com/MicrosoftDocs/terminal/pull/155
* [?] Schema updated. (Not sure if this is needed, also not sure where this would be)
* [X] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #7295 (Have only talked with the people on the issue, which I don't think has any core contributors)
## Detailed Description of the Pull Request / Additional comments
I am using SystemParametersInfo for SPI_GETDESKWALLPAPER which puts the path into a WCHAR and that is then inserted as the BackgroundImagePath.
I do not think an additional test would add value. The SPI_GETDESKTOPWALLPAPER uses the computers local wallpaper path and puts it into a WCHAR, which then I feed into BackgroundImagePath() as it's new path. I don't think there adds value in making a static path of the desktop background and testing that, given that static tests are already done for "BackgroundImage()".
## Validation Steps Performed
(Manual Validation - Test False Value)
1. Ran Terminal
2. Set setting ["backgroundImage": "<some random img path>"] under profiles->defaults
3. Verified terminal's background is not the desktops wallpaper.
(Manual Validation - Test True Value)
1. Ran Terminal
2. Set setting ["backgroundImage": "DesktopWallpaper"] under profiles->defaults
3. Verified the background image matches the desktop background image.
(Manual Validation - Multiple Tabs True Value)
1. Ran Terminal
2. Set setting ["backgroundImage": "DesktopWallpaper"] under profiles->defaults
3. Verified the background image matches the desktop background image.
4. Opened new tabs
5. Verified the background image matches the desktop background image for each tab.
For whatever reason, the super linter seems to think that any file it doesn't recognize is an EDITORCONFIG file. That means all our `cpp`, `hpp`, `h`, `resw`, `xaml`, etc files are going to get linted with different rules than the clang-format ones we already use.
This PR disables the EDITORCONFIG linter, and has a minimal change to a cpp file to ensure that it's no longer linted by the action.
See also:
* #7637 added this
* #7799 is blocked by this
* #7924 is blocked by this
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add a "Close..." option to the tab context menu, with nested entries to close tabs to the right and close other tabs (actions already available)
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#1912
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5524
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
First contribution 🙂
Tried to follow some suggestions from https://github.com/microsoft/terminal/issues/1912#issuecomment-667079311
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This uses the templates from
https://github.com/github/super-linter/tree/master/TEMPLATES currently.
A future PR can add the necessary templates to the Windows Terminal
repository and update the source of Templates following the README.
Additionally we can add flags to explicitly choose the linters
applicable to this code base but is not necessary.
Per the README, this does not enforce any linting rules but rather
outputs the suggestions in the build step, which are to be read by the
PR submitter and Windows Terminal team to determine if they want to use
the linting rule. C++ is currently not supported (Powershell, Json,
Yaml, and Markdown will be the only things the linter checks for
currently) but we could add our own custom support if desired in
separate PR.
## Validation Steps Performed
It successfully runs. Currently only shows the yaml file itself being
linted in this PR as a test case. It will apply to new PRs once this is
merged. We can lint existing code base but would require a separate PR
and examining the code output (also requires updating the yaml file
temporarily).
Closes#7513
* Correct the behaviour of parsing `rgb:R/G/B`. It should be interpreted
as `RR/GG/BB` instead of `0R/0G/0B`
* Add support for `rgb:RRR/GGG/BBB` and `rgb:RRRR/GGGG/BBBB`. The
behaviour of 12 bit variants is to repeat the first digit at the end,
e.g. `rgb:123/456/789` becomes `rgb:1231/4564/7897`.
* Add support for `#` formats. We are following the rules of
[XParseColor] by interpreting `#RGB` as `R000G000B000`.
* Add support for XOrg app color names, which are supported by xterm, VTE
and many other terminal emulators.
* Multi-parameter OSC 4 is now supported.
* The chaining of OSC 10-12 is not yet supported. But the parameter
validation is relaxed by parsing the parameters as multi-params but
only use the first one, which means `\e]10;rgb:R/G/B;` and
`\e]10:rgb:R/G/B;invalid` will execute `OSC 10` with the first color
correctly. This fixes some of the issues mentioned in #942 but not
all of them.
[XParseColor]: https://linux.die.net/man/3/xparsecolorCloses#3715
This commit introduces two new launch modes: focus and maximizedFocus.
* Focused mode, behaves like a default mode, but with the Focus Mode
enabled.
* Maximized focused mode, behaves like a Maximized mode, but with the
Focus Mode enabled.
There two ways to invoke these new modes:
* In the settings file: you set the "launchMode" to either "focus" or
"maximizedFocus"
* In the command line options, you can path -f / --focus, which is
mutually exclusive with the --fullscreen, but can be combined with the
--maximized:
* Passing -f / --focus will launch the terminal in the "focus" mode
* Passing -fM / --focus --maximized will launch the terminal in the
"maximizedFocus" mode
This should resolve a relevant part in the command line arguments
mega-thread #4632Closes#7124Closes#7825Closes#7875
Took this as an easy starter. The method IslandWindow::SetAlwaysOnTop is
triggered once terminal settings are reloaded (in
TerminalPage::_RefreshUIForSettingsReload flow). This method calls
SetWindowPos without SWP_NOACTIVATE. As a result the window gets
activated, the focus is set and the cursor starts blinking.
Added SWP_NOACTIVATE in all SetWindowPos calls from IslandWindow and
NoClientIslandWindow (where it was missing). Please let me know if this
is an overkill - it is not required to fix the issue, however seems a
good practice, that might help if we decide to apply more settings
immediately.
## Validation Steps Performed
* Only manual testing - please guide me to the relevant UT framework, if
exists.
* Trying to reproduce this with VS attached doesn't work - the window
gets the focus in any case.
* Tested as a standalone application, by modifying different settings
(and comparing the results before and after the fix).
* Checked with Spy++ that no WM_ACTIVATE / WM_SETFOCUS is thrown upon
settings modification
* Applied terminal resizing, toggling full screen and focus mode to
check no regression was introduced.
Closes#7571
Adds a tooltip to the new tab button and menu to let the user know
that holding alt will open a new pane instead.
Fixes#7851
Co-authored-by: Pankaj Bhojwani <pabhojwa@microsoft.com>
Adds the ability to manually handle the terminal renderer resizing
events by allowing different render size and WPF control size. This is
done by adding an `AutoFill` property to the control that prevents the
renderer from automatically resizing and tells the WPF control to fill
in the extra space with the terminal background as shown below:
This PR adds the following:
- Helper method in the DX engine to convert character viewports into
pixel viewports
- `AutoFill` property that prevents automatic resizing of the renderer
- Tweaks and fixes that automatically fill in the empty space if
`AutoFill` is set to false
- Fixes resizing methods and streamlines their codepath
## Validation Steps Performed
Manual validation with the Visual Studio Integrated Terminal tool
window.
This pull request introduces (a very, very stripped-down copy of) the
WIL fallback error reporter.
It emits error records, usually immediately before the application
implodes, into the event stream.
This should improve diagnosability of issues that take Terminal down,
and allow us to give out a .wprp file to gather traces from users.
`ScrollIntoView` is responsible for scrolling the viewport to include
the UTR's start endpoint. The crash was caused by `start` being at the
exclusive end, and attempting to scroll to it. This is now fixed by
clamping the result to the bottom of the buffer.
Most of the work here is to allow a test for this. `ScrollIntoView`
relied on a virtual `ChangeViewport` function. By making that
non-virtual, the `DummyElementProvider` in the tests can now be a
`ScreenInfoUiaProviderBase`. This opens up the possibility of more
UiaTextRange tests in the future too.
Closes#7839
This is not going to be our plan of record for Universal going forward.
This updates the Universal configuration to 1) match non-universal and 2) switch to local applications
## Summary of the Pull Request
This introduces a spec for (what I like to call) winrt TerminalSettings. Basically, we need to move over some of the code that resides in TerminalApp that relates to the settings model, then expose some of the settings objects as winrt objects. Doing so will allow us to access/modify settings across different project layers (a must-have for the Settings UI).
## References
#885 - winrt Terminal Settings issue
#1564 - spec for most of the backend work for Settings UI
## Summary of the Pull Request
Introduce the `IconPathConverter` to `TerminalApp`. `Command` and `Profile` now both return the unexpanded icon path. `IconPathConverter` is responsible for expanding the icon path and retrieving the appropriate icon source.
This also removes `Profile`'s expanded icon path and uses the `IconPathConverter` when necessary. This allows users to set profile icons to emoji as well. However, emoji do not appear in the jumplist.
## References
Based on #7667
## PR Checklist
* [X] Closes#7784
* [x] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
## Validation Steps Performed
Deploy succeeded.
#7796 and #7667 were being implemented concurrently. As a part of #7667, Command was moved from TermApp to TSM. This just applies that change to a line we missed in #7796 and fixes the build break.
## Summary of the Pull Request
This PR enables the ATS to display the active tab as the user navigates the tab switcher. We do this by dispatching the tab switch actions as the user navigates the menu, and manually _not_ focusing the new tab when the tab switcher is open.
## References
* #6732 - original tab switcher PR
* #6689 - That's a more involved, generic version of this, but this PR will be enough to stop most of the complaints hopefully
## PR Checklist
* [x] Closes#7409
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Opened tabs, tabbed through the menu, verified that it did what I'd expect
Introduces a new TerminalSettingsModel (TSM) project. This project is
responsible for (de)serializing and exposing Windows Terminal's settings
as WinRT objects.
## References
#885: TSM epic
#1564: Settings UI is dependent on this for data binding and settings access
#6904: TSM Spec
In the process of ripping out TSM from TerminalApp, a few other changes
were made to make this possible:
1. AppLogic's `ApplicationDisplayName` and `ApplicationVersion` was
moved to `CascadiaSettings`
- These are defined as static functions. They also no longer check if
`AppLogic::Current()` is nullptr.
2. `enum LaunchMode` was moved from TerminalApp to TSM
3. `AzureConnectionType` and `TelnetConnectionType` were moved from the
profile generators to their respective TerminalConnections
4. CascadiaSettings' `SettingsPath` and `DefaultSettingsPath` are
exposed as `hstring` instead of `std::filesystem::path`
5. `Command::ExpandCommands()` was exposed via the IDL
- This required some of the warnings to be saved to an `IVector`
instead of `std::vector`, among some other small changes.
6. The localization resources had to be split into two halves.
- Resource file linked in init.cpp. Verified at runtime thanks to the
StaticResourceLoader.
7. Added constructors to some `ActionArgs`
8. Utils.h/cpp were moved to `cascadia/inc`. `JsonKey()` was moved to
`JsonUtils`. Both TermApp and TSM need access to Utils.h/cpp.
A large amount of work includes moving to the new namespace
(`TerminalApp` --> `Microsoft::Terminal::Settings::Model`).
Fixing the tests had its own complications. Testing required us to split
up TSM into a DLL and LIB, similar to TermApp. Discussion on creating a
non-local test variant can be found in #7743.
Closes#885
The `MovementAtExclusiveEnd` test was improperly authored for the
following reasons:
- it should have used `TEST_METHOD_PROPERTY` to cover all of the
TextUnits
- TextUnit::Document (arguably one of the most important) was ommitted
accidentally (`!= TextUnit_Document` was used instead of `<=`)
- The created range was not `EndExclusive`, but rather, the last cell in
the buffer (`EndInclusive`)
The first half of this PR fixes the test.
The second half of this PR expands the test and fixes any related issues
to make the test pass (i.e. #7771):
- `TEST_METHOD_PROPERTY` was added for it to be degenerate (start/end at
`EndExclusive`) or not (last cell of buffer)
- `utr->_start` is now also validated after moving backwards
NOTE: `utr->_start` was not validated when moving forwards because
moving forwards should always fail when at/past the last chell in the
buffer.
Closes#7771
This commit makes the Windows Terminal play an audible sound when the
`BEL` control character is output.
The `BEL` control was already being forwarded through conpty, so it was
just a matter of hooking up the `WarningBell` dispatch method to
actually play a sound. I've used the `PlaySound` API to output the sound
configured for the "Critical Stop" system event (aka _SystemHand_),
since that is the sound used in conhost.
## Validation
I've manually confirmed that the terminal produces the expected sound
when executing `echo ^G` in a cmd shell, or `printf "\a"` in a WSL bash
shell.
References:
* There is a separate issue (#1608) to deal with configuring the `BEL`
to trigger visual forms of notification.
* There is also an issue (#2360) requesting an option to disable the
`BEL`.
Closes#4046
This performs a minor refactor on `TextBuffer::MoveToNextWord` that
relies more heavily on `TextBuffer::GetWordEnd`. Now, the logic is
simplified and looks more like `MoveToPreviousWord`.
This refactor required me to move the `lastCharPos` optimization down to
`GetWordEnd`. So word expansion gets this optimization for free now.
### WPR Traces
The percentages below represent the weight that a function call had. The
test scenario included moving by word on the CMD welcome message until
the last word was reached. Inspect.exe was used to limit any additional
calls that are generally performed by a screen reader.
| function | current | branch |
| -- | -- | -- |
| `UIA:Move` | 34.55% | 29.52% |
There is an improvement of about 5% in a release build of ConHost.
NOTE: `UIA::Move` already calls `Expand` after a move operation is
performed. I'm using this data to represent a performance improvement
across both functions.
Contributes to #5243
The WAP packaging project is sensitive to including applications that it
thinks are UWPs. The changes we made to separate WindowsStoreApp and
WindowsAppContainer weren't comprehensive enough to convince WAP that we
were not still UWPs.
Because of that, it would run sub-builds of each of these projects (and
all their dependencies) with an additional `GenerateAppxPackageOnBuild`
property set. The existence of this property caused MSBuild to think the
projects needed to be built *again*.
This fixes a bug when moving backwards by word that resulted in #7742.
This also includes...
- a minor refactor that leverages `GetWordStart` in `MoveToPreviousWord`
- additional unit tests for movement by word
- a feature test comprised of the referenced bug report
`MoveToPreviousWord()` would...
- move backwards for each whitespace character
- then, move backwards for each regular character
This would actually result in moving to the beginning of the current "word" (as defined by a11y).
We actually need to do this process twice:
- the first time gets you to the beginning of the current word
- attempt to move back by one character
- the second time gets you to the beginning of the previous word
Rather than implementing 4 while loops, we leverage `GetWordStart()` to
attempt to move to the beginning of the previous word. We call it twice
(as described above). The logic is unchanged, but we instead reuse a
function that has already undergone more testing.
To make sure this works as expected, additional unit tests were
introduced covering "MoveByWord" in the TextBuffer.
## Validation Steps Performed
Added test for repro steps.
Added unit tests for movement by word.
Closes#7742
til::static_map can't be constexpr until we move to C++20.
It can't be constexpr because std::sort isn't constexpr until then.
This poses a problem: if we start using it and treating it like a map,
we'll incur a potentially high cost in static initialization in both
code size in .text and runtime.
This commit introduces presorted_static_map, which is static_map except
that it doesn't automatically sort its keys. That's the only difference.
At this point, it's just a maplike interface to a constant array of
pairs that does a binary search. It should be used for small tables that
are used infrequently enough as to not warrant their cost in code size
or initialization time. It should also be used for tables that aren't
going to be edited much by developers (like the color table in #7578.)
Sometimes when we were sliding the viewport to fit inside the buffer, we
would end up with left > right.
That would cause us to crash down the line when rendering.
Fixes MSFT:28387423
Fixes#7744
DestListLogoUri cannot handle paths that are separated with / unless
they're actually URLs. We have to guess somewhat whether something is a
file path and if it appears to be one, normalize it.
Fixes#7706
`EndExclusive` represents the end of the buffer. This is designed to not
point to any data on the buffer. UiaTextRange would point to this
`EndExclusive` and then attempt to move based on it. However, since it
does not point to any data, it could experience undefined behavior or
(inevitably) crash from running out of bounds.
This PR specifically checks for expansion and movement at that point,
and prevents us from moving beyond it. There are plans in the future to
define the "end" as the last character in the buffer. Until then, this
solution will suffice and provide correct behavior that doesn't crash.
## Validation Steps Performed
Performed the referenced bugs' repro steps and added test coverage.
Closes MSFT-20458595
Closes#7663Closes#7664
This PR adds support for the _blink_ graphic rendition attribute. When a
character is output with this attribute set, it "blinks" at a regular
interval, by cycling its color between the normal rendition and a dimmer
shade of that color.
The majority of the blinking mechanism is encapsulated in a new
`BlinkingState` class, which is shared between the Terminal and Conhost
implementations. This class keeps track of the position in the blinking
cycle, which determines whether characters are rendered as normal or
faint.
In Windows Terminal, the state is stored in the `Terminal` class, and in
Conhost it's stored in the `CONSOLE_INFORMATION` class. In both cases,
the `IsBlinkingFaint` method is used to determine the current blinking
rendition, and that is passed on as a parameter to the
`TextAttribute::CalculateRgbColors` method when these classes are
looking up attribute colors.
Prior to calculating the colors, the current attribute is also passed to
the `RecordBlinkingUsage` method, which keeps track of whether there are
actually any blink attributes in use. This is used to determine whether
the screen needs to be refreshed when the blinking cycle toggles between
the normal and faint renditions.
The refresh itself is handled by the `ToggleBlinkingRendition` method,
which is triggered by a timer. In Conhost this is just piggybacking on
the existing cursor blink timer, but in Windows Terminal it needs to
have its own separate timer, since the cursor timer is reset whenever a
key is pressed, which is not something we want for attribute blinking.
Although the `ToggleBlinkingRendition` is called at the same rate as the
cursor blinking, we actually only want the cells to blink at half that
frequency. We thus have a counter that cycles through four phases, and
blinking is rendered as faint for two of those four. Then every two
cycles - when the state changes - a redraw is triggered, but only if
there are actually blinking attributes in use (as previously recorded).
As mentioned earlier, the blinking frequency is based on the cursor
blink rate, so that means it'll automatically be disabled if a user has
set their cursor blink rate to none. It can also be disabled by turning
off the _Show animations in Windows_ option. In Conhost these settings
take effect immediately, but in Windows Terminal they only apply when a
new tab is opened.
This PR also adds partial support for the `SGR 6` _rapid blink_
attribute. This is not used by DEC terminals, but was defined in the
ECMA/ANSI standards. It's not widely supported, but many terminals just
it implement it as an alias for the regular `SGR 5` blink attribute, so
that's what I've done here too.
## Validation Steps Performed
I've checked the _Graphic rendition test pattern_ in Vttest, and
compared our representation of the blink attribute to that of an actual
DEC VT220 terminal as seen on [YouTube]. With the right color scheme
it's a reasonably close match.
[YouTube]: https://www.youtube.com/watch?v=03Pz5AmxbE4&t=1m55sCloses#7388
Make sure we don't hide the cursor until the IME starts (#7673)
Some IME implementations do not produce composition strings, and their
users have come to rely on the cursor that conhost traditionally left on
until a composition string showed up. We shouldn't hide the cursor until
we get a string (as opposed to hiding it when composition begins) so as
to not break those IMEs.
Related to GH-6207.
Fixes MSFT-29219348
Some IME implementations do not produce composition strings, and their
users have come to rely on the cursor that conhost traditionally left on
until a composition string showed up. We shouldn't hide the cursor until
we get a string (as opposed to hiding it when composition begins) so as
to not break those IMEs.
Related to #6207.
Fixes MSFT:29219348
Currently, `CommandPalette` creates and maintains the `SwitchToTab`
commands used for the ATS. When `Command` goes into the
TerminalSettingsModel, the palette won't be able to access `Command`'s
implementation type, making it difficult for `CommandPalette` to tell
`Command` to listen to `Tab` for changes.
This PR changes the relationship up so `Tab` now manages its
`SwitchToTab` command, and `CommandPalette` just plops the command from
`Tab` into its list.
Add `ToJson()` to the `ConversionTrait`s in JsonUtils. This can be used
to serialize settings objects into JSON.
As a proof of concept, `ToJson` and `UpdateJson` were added to
`ColorScheme`.
Getters and setters for members and colors in the color table were added
and polished.
## References
#1564 - Settings UI
`ColorScheme` is a particularly easy example of serialization because it
has _no fallback_.
Added a few tests for JSON serializers.
## Summary of the Pull Request
This fixes a typo in the `HyperlinkIdConsistency` unit test which was causing that test to fail. It was mistakenly using a `/` instead of `\` for the string terminator sequences.
## References
The test initially worked because of a bug in the state machine parser, but that bug was recently fixed in PR #7340.
## PR Checklist
* [x] Closes#7654
* [x] CLA signed.
* [x] Tests passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Validation Steps Performed
I've run the test again and it now passes.
C1 control characters are now first converted to their 7 bit equivalent.
This allows us to unify the logic of C1 and C0 escape handling. This
also adds support for SOS/PM/APC string.
* Unify the logic for C1 and C0 escape handling by converting C1 to C0
beforehand. This adds support for various C1 characters, including
IND(8/4), NEL(8/5), HTS(8/8), RI(8/13), SS2(8/14), SS3(8/15),
OSC(9/13), etc.
* Add support for SOS/PM/APC escape sequences. Fixes#7032
* Use "Variable Length String" logic to unify the string termination
handling of OSC, DCS and SOS/PM/APC. This fixes an issue where OSC
action is successfully dispatched even when terminated with non-ST
character. Introduced by #6328, the DCS PassThrough is spared from
this issue. This PR puts them together and add test cases for them.
References:
https://vt100.net/docs/vt510-rm/chapter4.htmlhttps://vt100.net/emu/dec_ansi_parserCloses#7032Closes#7317
`KeyMapping` was introduced to break up `AppKeyBindings`. `KeyMapping`
records the keybindings from the JSON and lets you query them.
`AppKeyBindings` now just holds a `ShortcutActionDispatcher` to run
actions, and a `KeyMapping` to record/query your existing keybindings.
This refactor allows `KeyMapping` to be moved to the
TerminalSettingsModel, and `ShortcutActionDispatcher` and
`AppKeyBindings` will stay in TerminalApp.
`AppKeyBindings` had to be passed down to a terminal via
`TerminalSettings`. Since each settings object had its own
responsibility to update/create a `TerminalSettings` object, I moved all
of that logic to `TerminalSettings`. This helps with the
TerminalSettingsModel refactor, and makes the construction of
`TerminalSettings` a bit cleaner and more centralized.
## References
#885 - this is all in preparation for the TerminalSettingsModel
## Validation Steps Performed
- [x] Tests passed
- [X] Deployment succeeded
Clang (10) has no trouble optimizing the COLORREF conversion operator to
a simple 32-bit load with mask (!) even though it's a series of bit
shifts across multiple struct members.
MSVC (19.24) doesn't make the same optimization decision, and it emits
three 8-bit loads and some shifting.
In any case, the optimization only applies at -O2 (clang) and above.
In this commit, we leverage the spec-legality of using unions for type
conversions and the overlap of four uint8_ts and a uint32_t to make the
conversion very obvious to both compilers.
x86_64 msvc | O0 | O1 | O2
------------|----|----|--------------------
shifts | 12 | 11 | 11 (fully inlined)
union | 5 | 1 | 1 (fully inlined)
x86_64 clang | O0 | O1 | O2 + O3
-------------|----|----|--------------------
shifts | 14 | 5 | 1 (fully inlined)
union | 9 | 3 | 1 (fully inlined)
j4james brought up some concerns about til::color's minor wastefulness
in https://github.com/microsoft/terminal/pull/7578#discussion_r487355989.
This is a clear, simple transformation that saves us a few instructions
in a relatively common case, so I'm accepting a micro-optimization even
though we don't have data showing this to be a hot spot.
Now that CascadiaSettings is a WinRT object, we need to update the error
handling a bit. Making it a WinRT object limits our errors to be
hresults. So we moved all the error handling down a layer to when we
load the settings object.
- Warnings encountered during validation are saved to `Warnings()`.
- Errors encountered during validation are saved to `GetLoadingError()`.
- Deserialization errors (mainly from JsonUtils) are saved to
`GetDeserializationErrorMessage()`.
## References
#7141 - CascadiaSettings is a settings object
#885 - this makes ripping out CascadiaSettings into
TerminalSettingsModel much easier
## Validation Steps Performed
* [x] Tests passed
- [x] Deployment succeeded
- tested with invalid JSON (deserialization error)
- tested with missing DefaultProfile (validation error)
If a user clicks a link that is either invalid (cannot be parsed) or has
a scheme we do not support (like file or mailto (for now)), we open up a
dialog box telling them the issue.
References #5001
- Render hyperlinks with a dashed underline
- Render hovered hyperlinks with a solid underline
- Show URI tooltip on hover
TermControl now has a canvas that contains a tiny border to which a
tooltip is attached. When we hover over hyperlinked text, we move the
border to the mouse location and update the tooltip content with the
URI.
Introduced a new underline type (HyperlinkUnderline), supports rendering
for it, and uses it to render hyperlinks. HyperlinkUnderline is usually
a dashed underline, but when a link is hovered, all text with the same
hyperlink ID is rendered with a solid underline.
References #5001
This fixes an issue where two CPRs could end up corrupted in the input
buffer. An application that sent two CPRs back-to-back could
end up reading the first few characters of the first prepended CPR
before handing us another CPR. We would dutifully prepend it to the
buffer, causing them to overlap.
```
^[^[2;2R[1;1R
^^ ^^^^^ First CPR
^^^^^^ Second CPR
```
The end result of this corruption is that a requesting application
would receive an unbidden `R` on stdin; for vim, this would trigger
replace mode immediately on startup.
Response prepending was implemented in !997738 without much comment.
There's very little in the way of audit trail as to why we switched.
Michael believes that we wanted to make sure that applications got DSR
responses immediately. It had the unfortunate side effect of causing
subsequence CPRs across cursor moves to come out in the wrong order.
I discussed our options with him, and he suggested that we could
implement a priority queue in InputBuffer and make sure that "response"
input was dispatched to a client application before any application- or
user-generated input. This was deemed to be too much work.
We decided that DSR responses getting top billing was likely to be a
stronger guarantee than most terminals are capable of giving, and that
we should be fine if we just switch it back to append.
Thanks to @k-takata, @tekki and @brammool for the investigation on the
vim side.
Fixes#1637.
This commit leverages C++/WinRT's final_release [extension point] to
pull the final destruction of ConptyConnection off onto a background
thread.
We've been seeing some deadlocks during teardown where the output thread
(holding the last owning reference to the connection) was trying to
destruct the threadpool wait while the threadpool wait was
simultaneously running its callback and waiting for the output thread to
terminate. It turns out that trying to release a threadpool wait while
it's running a callback that's blocked on you will absolutely result in
a deadlock.
Fixes#7392.
[extension point]: https://devblogs.microsoft.com/oldnewthing/20191018-00/?p=103010
CascadiaSettings is now a WinRT object in the TerminalApp project.
## References
#7141 - CascadiaSettings is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
This one _looks_ big, but most of it is really just propagating the
changes to the tests. In fact, you can probably save yourself some time
because the tests were about an hour of Find&Replace.
`CascadiaSettings::GetCurrentAppSettings()` was only being used in
Pane.cpp. So I ripped out the 3 lines of code and stuffed them in there.
Follow-up work:
- There's a few places in AppLogic where I `get_self` to be able to get
the warnings out. This will go away in the next PR (wrapping up #885)
## Validation Steps Performed
- [x] Tests passed
- [X] Deployment succeeded
Closes#7141
By setting the jumplist entries to launch `WindowsTerminal.exe` out of
the package root, we've inadvertently made WindowsTerminalDev emit jump
list entries that launch the _unpackaged_ version of Terminal.
We can fix this by copying the code from the shell extension that
determines which version of the executable to launch -- wt, wtd or
WindowsTerminal -- depending on the context under which it was invoked.
Fixes#7554
Conhost expands UIA text ranges when moved. This means that degenerate
ranges become non-degenerate after movement, leading to odd behaviour
from UIA clients. This PR doesn't expand degenerate ranges, but rather
keeps them degenerate by moving `_end` to the newly-changed `_start`.
Tested in the NVDA Python console (cases with `setEndPoint` and
`compareEndPoints` described in #7342). Also ran the logic by
@michaeldcurran.
Closes#7342
Almost definitely addresses nvaccess/nvda#11288 (although I'll need to
test with my Braille display). Also fixes an issue privately reported to
me by @simon818 with copy/paste from review cursor which originally lead
me to believe the issue was with `moveEndPointByRange`.
This PR is about the behavior of DECSCUSR. This PR changes the meaning
of DECSCUSR 0 to restore the cursor style back to user default. This
differs from what VT spec says but it’s used in popular terminal
emulators like iTerm2 and VTE-based ones. See #1604.
Another change is that for parameter greater than 6, DECSCUSR should be
ignored, instead of restoring the cursor to legacy. This PR fixes it.
See #7382.
Fixes#1604.
This commit introduces Jumplist customization and an item for each
profile to the Jumplist. Selecting an entry in the jumplist will pretty
much just execute `wt.exe -p "{profile guid}"`, and so a new Terminal
will open with the selected profile.
Closes#576
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp dd0c54d9abd94dea1ffe956373a4c20b30a6151e
Related work items: MSFT-26187783
When attempting to select a text range from a different text buffer (such as a standard text range when in alt mode), conhost crashes. This PR checks for this case and returns `E_FAIL` instead, preventing this crash.
## PR Checklist
* [x] Closes unfiled crash issue
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Passes manual test below
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Ran the following lines in the NVDA Python console (NVDA+control+z) before and after this PR, and observed that Conhost no longer crashes after the change:
``` Python console
>>> # SSH to a remote Linux system
>>> ti=nav.makeTextInfo("caret")
>>> ti.move("line", -2)
-2
>>> # Switch away from the NVDA Python console, and run Nano in conhost. Then:
>>> ti.updateSelection() # Calls select() on the underlying UIA text range
Traceback (most recent call last):
File "<console>", line 1, in <module>
File "NVDAObjects\UIA\__init__.pyc", line 790, in updateSelection
File "comtypesMonkeyPatches.pyc", line 26, in __call__
_ctypes.COMError: (-2147220991, 'An event was unable to invoke any of the subscribers', (None, None, None, 0, None))
```
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Conhost can now support OSC8 sequences (as specified [here](https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda)). Terminal also supports those sequences and additionally hyperlinks can be opened by Ctrl+LeftClicking on them.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#204
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#204
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Added support to:
- parse OSC8 sequences and extract URIs from them (conhost and terminal)
- add hyperlink uri data to textbuffer/screeninformation, associated with a hyperlink id (conhost and terminal)
- attach hyperlink ids to text to allow for uri extraction from the textbuffer/screeninformation (conhost and terminal)
- process ctrl+leftclick to open a hyperlink in the clicked region if present
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Open up a PowerShell tab and type
```PowerShell
${ESC}=[char]27
Write-Host "${ESC}]8;;https://github.com/microsoft/terminal${ESC}\This is a link!${ESC}]8;;${ESC}\"
```
Ctrl+LeftClick on the link correctly brings you to the terminal page on github
GlobalAppSettings is now a WinRT object in the TerminalApp project.
## References
#7141 - GlobalAppSettings is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
## PR Checklist
* [x] Tests passed
## Detailed Description of the Pull Request / Additional comments
This one was probably the easiest thus far.
The only weird thing is how we handle InitialPosition. Today, we lose a
little bit of fidelity when we convert from LaunchPosition (int) -->
Point (float) --> RECT (long). The current change converts
LaunchPosition (optional<long>) --> InitialPosition (long) --> RECT
(long).
NOTE: Though I could use LaunchPosition to go directly from TermApp to
AppHost, I decided to introduce InitialPosition because LaunchPosition
will be a part of TerminalSettingsModel soon.
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
Profile is now a WinRT object in the TerminalApp project.
As with ColorScheme, all of the serialization logic is not exposed via
the idl. TerminalSetingsModel will handle it when it's all moved over.
I removed the "Get" and "Set" prefixes from all of the Profile
functions. It just makes more sense to use the `GETSET_PROPERTY` macro
to do most of the work for us.
`CloseOnExitMode` is now an enum off of the Profile.idl.
`std::optional<wstring>` got converted to `hstring` (as opposed to
`IReference<hstring>`). `IReference<hstring>` is not valid to MIDL.
## References
#7141 - Profile is a settings object
#885 - this new settings object will be moved to a new TerminalSettingsModel project
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
Closes#7435
Dustin L. Howett
* Clear the last error before calling Mb2Wc in ConvertToW (GH-7391)
* Update clang-format to 10.0 (GH-7389)
* Add til::static_map, a constexpr key-value store (GH-7323)
James Holderness
* Refactor VT control sequence identification (CC-7304)
Mike Griese
* Compensate for VS 16.7, part 2 (GH-7383)
* Add support for iterable, nested commands (GH-6856)
Michael Niksa
* Helix Testing (GH-6992)
* Compensate for new warnings and STL changes in VS 16.7 (GH-7319)
nathpete-msft
* Fix environment block creation (GH-7401)
Chester Liu
* Add initial support for VT DCS sequences (CC-6328)
Related work items: #28791050
## Summary of the Pull Request
The `index` action argument is now optional for `closeOtherTabs` and `closeTabsAfter`. When `index` is not defined, `index` is set to the focused tab's index.
Also, adds the non-index version of these actions to defaults.json.
## PR Checklist
* [X] Closes#7181
* [X] CLA signed
* [X] Tests passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [X] Schema updated.
## Validation Steps Performed
Opened 4 tabs and ran closeOtherTabs/closeTabsAfter from command palette.
This fixes a regression in environment variable loading introduced as part
of the new environment block creation that prevents some system-defined,
volatile environment variables from being defined.
## References
https://github.com/microsoft/terminal/pull/7243#discussion_r476603599
## Validation Steps Performed
Manually verified locally.
Closes#7399
## Summary of the Pull Request
Previously, if `altGrAliasing` was disabled, all `Ctrl+Alt` combinations were considered to be aliases of `AltGr` including `AltGr` itself and thus considered as key and not character events. But `AltGr` should not be treated as an alias of itself of course, as that prevents one from entering `AltGr` combinations entirely.
## PR Checklist
* [x] Closes#7372
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Activate a German keyboard layout
* Run `showkey -a` in WSL
* **Ensure** that `AltGr+Q` produces `@`
* **Ensure** that `Ctrl+Alt+Q` produces `@`
* Disable `altGrAliasing`
* **Ensure** that `AltGr+Q` produces `@`
* **Ensure** that `Ctrl+Alt+Q` produces `^[^Q`
When the console functional tests are running on OneCoreUAP, the
newly-introduced (65bd4e327, #4309) FillOutputCharacterA tests will
actually fail because of radio interference on the return value of GLE.
Fixes MSFT-28163465
This commit removes our local copy of clang-format 8 and replaces it
with a newly-built nuget package containing clang-format 10.
This resolves the inconsistency between our version of clang-format and
the one shipped in Visual Studio.
A couple minor format changes were either required or erroneously forced
upon us--chief among them is a redistribution of `*`s around SAL
annotations in inline class members of COM classes. Don't ask why; I
couldn't figure it out.
We had some aspirational goals for our formatting, which were left in
but commented out. Enabling them changes our format a little more than
I'm comfortable with, so I uncommented them and locked them to the
format style we've been using for the past year. We may not love it, but
our aspirations may not matter here any longer. Consistent formatting is
better than perfect formatting.
Most applications with scrollable content seem to define the "large
jump" distance as about a screenful of content. You can see this in long
pages in Settings and documents in Notepad.
We just weren't configuring ScrollBar here.
Fixes#7367
## Summary of the Pull Request
Adds support for "commandline mode" to the command palette.
This allows the user to start typing a `wt.exe` commandline directly in the command palette, to run that commandline directly in the current window. This allows the user input something like `> nt -p Ubuntu ; sp -p ssh` and open up a new tab and split it _in the current window_.
## References
* cmdpal megathread: #5400
* Kinda related to #4472
* built with the `wt` action from #6537
## PR Checklist
* [x] Closes#6677
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - sure does, when the cmdpal docs are written in the first place :P
## Validation Steps Performed
Tested manually
## Summary of the Pull Request
Adds support for setting a command's `icon`. This supports a couple different scenarios:
* setting a path to an image
* on `"iterateOn": "profiles"` commands, setting the icon to `${profile.icon}` (to use the profile's icon)
* setting the icon to a symbol from [Segoe MDL2 Assets](https://docs.microsoft.com/en-us/windows/uwp/design/style/segoe-ui-symbol-font)
* setting the icon to an emoji
* setting the icon to a character (what is an emoji other than a character, after all?)
## References
* Big s/o to @leonMSFT in #6732, who really did all the hard work here.
## PR Checklist
* [x] Closes#6644
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Importantly, the creation of these icons must occur on the UI thread. That's why it's done in a "load the path from json", then "get the actual IconSource" structure.
## Validation Steps Performed
see the gif
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR splits the anchored and unanchored tab switcher into two. The anchored tab switcher is now baked into `nextTab`/`prevTab`, and the unanchored tab switcher command is just named `tabSearch`. `tabSearch` takes no arguments. To reflect this distinction, `CommandPalette.cpp` now refers to one as `TabSwitchMode` and the other as `TabSearchMode`.
I've added a global setting named `useTabSwitcher` (name up for debate) that makes the Terminal use the anchored tab switcher experience for `nextTab` and `prevTab`.
I've also given the control the ability to detect <kbd>Alt</kbd> KeyUp events and to dispatch keybinding events. By listening for keybindings, the ATS can react to `nextTab`/`prevTab` invocations for navigation in addition to listening for <kbd>tab</kbd> and the arrow keys.
Closes#7178
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] CLA signed.
* [x] Documentation updates: microsoftdocs/terminal#107
* [x] Schema updated.
## Summary of the Pull Request
Adds a pair of top-level commands that both have nested, iterable sub-commands. The "New Tab..." command has one child for each profile, and will open a new tab for that profile. The "Split Pane..." command similarly has a nested command for each profile, and also has a nested command for split auto/horizontal/vertical.
## References
* megathread: #5400
* Would look better with icons from #6644
## PR Checklist
* [x] Closes#7174
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
The easiest fix was actually just moving all the source files from
`TerminalApp` to `TerminalApp/lib`, where the appropriate `pch.h`
actually resides.
Closes#6866
In #6532, we thought it would be a good idea to add "bindings" as an
overload for "keybindings", as we were no longer going to use the
keybindings array for just keybindings. We were going to add commands.
So we started secretly treating `"bindings"` the same as
`"keybindings"`.
Then, in #7175, we discussed using "actions" as the key for the list of
commands/keybindings/global actions, instead of using "bindings". We're
going to be using this array as the global list of all actions, so it
makes sense to just call it `"actions"`.
This PR renames "bindings" to "actions". Fortunately, we never
documented the "bindings" overload in the first place, so we can get
away with this safely, and preferably before we ship "bindings" for too
long.
References #6899
#6989 forgot to add `togglePaneZoom` to the schema, so this does that.
WHILE I'M HERE:
* The action names in the schema and the actual source were both in _random_ order, so I sorted them alphabetically.
* I also added an unbound `togglePaneZoom` command to defaults.json, so users can use that command from the cmdpal w/o binding it manually.
Activating a template doesn't actually process conditions. Only jobs, stages, and tasks can process a condition. So specify the full condition in the parent template call as a parameter and ask the child job (who can actually evaluate the condition) to use that parameter to determine if it should run.
## Summary of the Pull Request
Allows for creating commands that iterate over the user's color schemes. Also adds a top-level nested command to `defaults.json` that allows the user to select a color scheme (pictured above). I'm not sure there are really any other use cases that make sense, but it _really_ makes sense for this one.
## References
* #5400 - cmdpal megathread
* made possible by #6856, _and support from viewers like you._
* All this is being done in pursuit of #6689
## PR Checklist
* [x] Closes wait what? I could have swore there was an issue for this one...
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - okay maybe now I'll write some docs
## Detailed Description of the Pull Request / Additional comments
Most of the hard work for this was already done in #6856. This is just another thing to iterate over.
## Validation Steps Performed
* Played with this default command. It works great.
* Added tests.
Adds the ability to set the selection background opacity when setting the
selection background. This also exposes the selection background and alpha
through the terminal WPF container.
## Summary of the Pull Request
* Add a chevron for nested commands
* Add the text of the parent command when entering a child command
## References
## PR Checklist
* [x] Closes#7265
* [x] I work here
* [n/a] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
_look at that gif_
This PR changes the way VT control sequences are identified and
dispatched, to be more efficient and easier to extend. Instead of
parsing the intermediate characters into a vector, and then having to
identify a sequence using both that vector and the final char, we now
use just a single `uint64_t` value as the identifier.
The way the identifier is constructed is by taking the private parameter
prefix, each of the intermediate characters, and then the final
character, and shifting them into a 64-bit integer one byte at a time,
in reverse order. For example, the `DECTLTC` control has a private
parameter prefix of `?`, one intermediate of `'`, and a final character
of `s`. The ASCII values of those characters are `0x3F`, `0x27`, and
`0x73` respectively, and reversing them gets you 0x73273F, so that would
then be the identifier for the control.
The reason for storing them in reverse order, is because sometimes we
need to look at the first intermediate to determine the operation, and
treat the rest of the sequence as a kind of sub-identifier (the
character set designation sequences are one example of this). When in
reverse order, this can easily be achieved by masking off the low byte
to get the first intermediate, and then shifting the value right by 8
bits to get a new identifier with the rest of the sequence.
With 64 bits we have enough space for a private prefix, six
intermediates, and the final char, which is way more than we should ever
need (the _DEC STD 070_ specification recommends supporting at least
three intermediates, but in practice we're unlikely to see more than
two).
With this new way of identifying controls, it should now be possible for
every action code to be unique (for the most part). So I've also used
this PR to clean up the action codes a bit, splitting the codes for the
escape sequences from the control sequences, and sorting them into
alphabetical order (which also does a reasonable job of clustering
associated controls).
## Validation Steps Performed
I think the existing unit tests should be good enough to confirm that
all sequences are still being dispatched correctly. However, I've also
manually tested a number of sequences to make sure they were still
working as expected, in particular those that used intermediates, since
they were the most affected by the dispatch code refactoring.
Since these changes also affected the input state machine, I've done
some manual testing of the conpty keyboard handling (both with and
without the new Win32 input mode enabled) to make sure the keyboard VT
sequences were processed correctly. I've also manually tested the
various VT mouse modes in Vttest to confirm that they were still working
correctly too.
Closes#7276
Use the Helix testing orchestration framework to run our Terminal LocalTests and Console Host UIA tests.
## References
#### Creates the following new issues:
- #7281 - re-enable local tests that were disabled to turn on Helix
- #7282 - re-enable UIA tests that were disabled to turn on Helix
- #7286 - investigate and implement appropriate compromise solution to how Skipped is handled by MUX Helix scripts
#### Consumes from:
- #7164 - The update to TAEF includes wttlog.dll. The WTT logs are what MUX's Helix scripts use to track the run state, convert to XUnit format, and notify both Helix and AzDO of what's going on.
#### Produces for:
- #671 - Making Terminal UIA tests is now possible
- #6963 - MUX's Helix scripts are already ready to capture PGO data on the Helix machines as certain tests run. Presuming we can author some reasonable scenarios, turning on the Helix environment gets us a good way toward automated PGO.
#### Related:
- #4490 - We lost the AzDO integration of our test data when I moved from the TAEF/VSTest adapter directly back to TE. Thanks to the WTTLog + Helix conversion scripts to XUnit + new upload phase, we have it back!
## PR Checklist
* [x] Closes#3838
* [x] I work here.
* [x] Literally adds tests.
* [ ] Should I update a testing doc in this repo?
* [x] Am core contributor. Hear me roar.
* [ ] Correct spell-checking the right way before merge.
## Detailed Description of the Pull Request / Additional comments
We have had two classes of tests that don't work in our usual build-machine testing environment:
1. Tests that require interactive UI automation or input injection (a.k.a. require a logged in user)
2. Tests that require the entire Windows Terminal to stand up (because our Xaml Islands dependency requires 1903 or later and the Windows Server instance for the build is based on 1809.)
The Helix testing environment solves both of these and is brought to us by our friends over in https://github.com/microsoft/microsoft-ui-xaml.
This PR takes a large portion of scripts and pipeline configuration steps from the Microsoft-UI-XAML repository and adjusts them for Terminal needs.
You can see the source of most of the files in either https://github.com/microsoft/microsoft-ui-xaml/tree/master/build/Helix or https://github.com/microsoft/microsoft-ui-xaml/tree/master/build/AzurePipelinesTemplates
Some of the modifications in the files include (but are not limited to) reasons like:
- Our test binaries are named differently than MUX's test binaries
- We don't need certain types of testing that MUX does.
- We use C++ and C# tests while MUX was using only C# tests (so the naming pattern and some of the parsing of those names is different e.g. :: separators in C++ and . separators in C#)
- Our pipeline phases work a bit differently than MUX and/or we need significantly fewer pieces to the testing matrix (like we don't test a wide variety of OS versions).
The build now runs in a few stages:
1. The usual build and run of unit tests/feature tests, packaging verification, and whatnot. This phase now also picks up and packs anything required for running tests in Helix into an artifact. (It also unifies the artifact name between the things Helix needs and the existing build outputs into the single `drop` artifact to make life a little easier.)
2. The Helix preparation build runs that picks up those artifacts, generates all the scripts required for Helix to understand the test modules/functions from our existing TAEF tests, packs it all up, and queues it on the Helix pool.
3. Helix generates a VM for our testing environment and runs all the TAEF tests that require it. The orchestrator at helix.dot.net watches over this and tracks the success/fail and progress of each module and function. The scripts from our MUX friends handle installing dependencies, making the system quiet for better reliability, detecting flaky tests and rerunning them, and coordinating all the log uploads (including for the subruns of tests that are re-run.)
4. A final build phase is run to look through the results with the Helix API and clean up the marking of tests that are flaky, link all the screenshots and console output logs into the AzDO tests panel, and other such niceities.
We are set to run Helix tests on the Feature test policy of only x64 for now.
Additionally, because the set up of the Helix VMs takes so long, we are *NOT* running these in PR trigger right now as I believe we all very much value our 15ish minute PR turnaround (and the VM takes another 15 minutes to just get going for whatever reason.) For now, they will only run as a rolling build on master after PRs are merged. We should still know when there's an issue within about an hour of something merging and multiple PRs merging fast will be done on the rolling build as a batch run (not one per).
In addition to setting up the entire Helix testing pipeline for the tests that require it, I've preserved our classic way of running unit and feature tests (that don't require an elaborate environment) directly on the build machines. But with one bonus feature... They now use some of the scripts from MUX to transform their log data and report it to AzDO so it shows up beautifully in the build report. (We used to have this before I removed the MStest/VStest wrapper for performance reasons, but now we can have reporting AND performance!) See https://dev.azure.com/ms/terminal/_build/results?buildId=101654&view=ms.vss-test-web.build-test-results-tab for an example.
I explored running all of the tests on Helix but.... the Helix setup time is long and the resources are more expensive. I felt it was better to preserve the "quick signal" by continuing to run these directly on the build machine (and skipping the more expensive/slow Helix setup if they fail.) It also works well with the split between PR builds not running Helix and the rolling build running Helix. PR builds will get a good chunk of tests for a quick turn around and the rolling build will finish the more thorough job a bit more slowly.
## Validation Steps Performed
- [x] Ran the updated pipelines with Pull Request configuration ensuring that Helix tests don't run in the usual CI
- [x] Ran with simulation of the rolling build to ensure that the tests now running in Helix will pass. All failures marked for follow on in reference issues.
This is based on (cribbed almost directly from) code written by the
inimitable @StephanTLavavej on one of our mailing lists.
This is a nice generic version of the approach used in
JsonUtils::EnumMapper and CodepointWidthDetector: a static array of
key-value pairs that we binary-search at runtime (or at compile time, as
the case may be.)
Keys are not required to be sorted, as we're taking advantage of
constexpr std::sort (VS 16.6+) to get the compiler to do it for us. How
cool is that?
static_map presents an operator[] or at much like
std::map/std::unordered_map does.
I've added some tests, but they're practically fully-solveable at compile
time so they pretty much act like `VERIFY_IS_TRUE(true)`.
- Add MENU key with "menu" "app" as key bindings.
- Updated profiles.schema.json and documentation.
## Validation Steps Performed
Ran tests locally.
Tested out the new key binding.
```{ "command": "openNewTabDropdown", "keys": "app" }```
Closes#7144
New warnings were added in VS 16.7 and `std::map::erase` is now `noexcept`.
Update our code to be compatible with the new enforcement.
## PR Checklist
* [x] Closes broken audit in main after Agents updated over the weekend.
* [x] I work here.
* [x] Audit mode passes now
* [x] Am core contributor.
## Validation Steps Performed
* [x] Ran audit mode locally
As the title suggests, this commit adds initial support for the VT DCS
sequences. The parameters are parsed but not yet used. The pass through
data is yet to be handled. This effectively fixes#120 by making Sixel
graphics sequences *ignored* instead of printed.
* https://vt100.net/docs/vt510-rm/chapter4.html
* https://vt100.net/emu/dec_ansi_parser
Tests added.
References #448Closes#120
Adds array support for the existing `copyFormatting` global setting.
This allows users to define which formats they would specifically like
to be copied.
A boolean value is still accepted and is translated to the following:
- `false` --> `"none"` or `[]`
- `true` --> `"all"` or `["html", "rtf"]`
This also adds `copyFormatting` as a keybinding arg for `copy`. As with
the global setting, a boolean value and array value is accepted.
CopyFormat is a WinRT enum where each accepted format is a flag.
Currently accepted formats include `html`, and `rtf`. A boolean value is
accepted and converted. `true` is a conjunction of all the formats.
`false` only includes plain text.
For the global setting, `null` is not accepted. We already have a
default value from before so no worries there.
For the keybinding arg, `null` (the default value) means that we just do
what the global arg says to do. Overall, the `copyFormatting` keybinding
arg is an override of the global setting **when using that keybinding**.
References #5212 - Spec for formatted copying
References #2690 - disable html copy
Validated behavior with every combination of values below:
- `copyFormatting` global: { `true`, `false`, `[]`, `["html"]` }
- `copyFormatting` copy arg:
{ `null`, `true`, `false`, `[]`, `[, "html"]`}
Closes#4191Closes#5262
ColorScheme is now a WinRT object.
All of the JSON stuff can't be exposed via the idl. So the plan here is
that we'll have the TerminalSettingsModel project handle all of the
serialization when it's moved over. These functions will be exposed off
of the `implementation` namespace, not projected namespace.
References #7141 - ColorScheme is a settings object
References #885 - this new settings object will be moved to a new
TerminalSettingsModel project
## Validation Steps Performed
- [x] Tests passed
- [x] Deployment succeeded
#7145 introduced a check so that we wouldn't dispatch keys unless they
actually had a scancode. Our synthetic events actually _didn't_ have
scancodes. Not because they couldn't--just because they didn't.
Fixes#7297
## Summary of the Pull Request
This PR adds support for both _nested_ and _iterable_ commands in the Command palette.
* **Nested commands**: These are commands that include additional sub-commands. When the user selects on of these, the palette will update to only show the nested commands.
* **Iterable commands**: These are commands what allow the user to define only a single command, which is repeated once for every profile. (in the future, also repeated for color schemes, themes, etc.)
The above gif uses the following json:
```json
{
"name": "Split Pane...",
"commands": [
{
"iterateOn": "profiles",
"name": "Split with ${profile.name}...",
"commands": [
{ "command": { "action": "splitPane", "profile": "${profile.name}", "split": "automatic" } },
{ "command": { "action": "splitPane", "profile": "${profile.name}", "split": "vertical" } },
{ "command": { "action": "splitPane", "profile": "${profile.name}", "split": "horizontal" } }
]
}
]
},
```
## References
## PR Checklist
* [x] Closes#3994
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - Sure does, but we'll finish polishing this first.
## Detailed Description of the Pull Request / Additional comments
We've now gotta keep the original json for a command around, so that once we know what all the profiles will be, we can expand the commands that need it.
We've also got to parse commands recursively, because they might have any number of child commands.
These together made the command parsing a _lot_ more complicated, but it feels good so far.
## Validation Steps Performed
* wrote a bunch of tests
* Played with it a bunch
Removes the if-statement in `UpdateTabIndices` that blocks all scenarios where you delete the second to last tab. This fixes the issue where the ATS gets confused about which item in the ListView is associated with which tab.
Closes#7278
This is a minor fix from #6989. If there's only one pane in the
Terminal, then we'd still "zoom" it and give it a border, but all the
borders would be black.
A single pane is already "zoomed", so it doesn't really make sense to
try and zoom if there's only one.
Whoops, members are zero initialized in Debug builds but most likely not
in Release builds So, this PR adds a couple of default values to
`_currentMode` and its associated XAML strings to make cmdpal/ats work
deterministically on first use. I also added a default value to
`_anchorKey` just to be safe.
Closes#7254
Carlos Zamora (1)
* Pass mouse button state into HandleMouse instead of asking win32 (GH-6765)
James Holderness (1)
* Add support for the "doubly underlined" graphic rendition attribute (CC-7223)
Moshe Schorr (1)
* Batch RTL runs to ensure proper draw order (CC-7190)
Related work items: MSFT-28385436
## Summary of the Pull Request
This PR enables users to send arbitrary text input to the shell via a keybinding.
## PR Checklist
* [x] Closes#3799
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #3799
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
Added the following keybindings:
```json
{ "keys": "p", "command": { "action": "sendInput", "input": "foobar" } },
{ "keys": "q", "command": { "action": "sendInput", "input": "\u001b[A" } },
```
Ensured that when pressing <kbd>P</kbd> "foobar" is echoed to the shell and when pressing <kbd>Q</kbd> the shell history is being navigated backwards.
* This is a mini-spec for how I see this working
* good bot
* These were some typos
* Addd a future consideration about the command palette and commands
* Update spec to reflect discussion with Carlos
* update spec to reflect investigations in Command Palette Addenda 1
* add references to #6899, and minor bits of review feedback
* add `remainingProfiles` as a way of adding all the user's other profiles quickly to the menu as well
* clarify why we're not doing it in the profiles list
* no two commits do not contain a misspelling of separate
## Summary of the Pull Request
⚠️ This spec has been moved from #6902. That version was branched off the new tab menu customization, and had a terribly convoluted git history. After discussion with the team, we've decided that it's best that this spec is merged atomically _first_, and used as the basis for #5888, as opposed to the other way around.
> This document is intended to serve as an addition to the [Command Palette Spec],
> as well as the [New Tab Menu Customization Spec].
>
> As we come to rely more on actions being a mechanism by which the user defines
> "do something in the Terminal", we'll want to make it even easier for users to
> re-use the actions that they've already defined, as to reduce duplicated json as
> much as possible. This spec proposes a mechanism by which actions could be
> uniquely identifiable, so that the user could refer to bindings in other
> contexts without needing to replicate an entire json blob.
>
## PR Checklist
* [x] Specs: #6899
* [x] References: #1571, #1912, #3337, #5025, #5524, #5633
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
[Command Palette Spec]: https://github.com/microsoft/terminal/blob/master/doc/specs/%232046%20-%20Command%20Palette.md
[New Tab Menu Customization Spec]: https://github.com/microsoft/terminal/blob/master/doc/specs/%231571%20-%20New%20Tab%20Menu%20Customization.md
This commit ensures that we always furnish a new process with the
cleanest, most up-to-date environment variables we can. There is a minor
cost here in that WT will no longer pass environment variables that it
itself inherited to its child processes.
This could be considered a reasonable sacrifice. It will also remove
somebody else's TERM, TERM_PROGRAM and TERM_PROGRAM_VERSION from the
environment, which could be considered a win.
I validated that GetCurrentProcessToken returns a token we're
_technically able_ to use with this API; it is roughly equivalent to
OpenProcessToken(GetCurrentProcess) in that it returns the current
active _access token_ (which is what CreateEnvironmentBlock wants.)
There's been discussion about doing a 3-way merge between WT's
environment and the new one. This will be complicated and I'd like to
scream test the 0-way merge first ;P
Related to #1125 (but it does not close it or resolve any of the other
issues it calls out.)
Fixes#7239Fixes#7204 ("App Paths" value creeping into wt's environment)
This regressed around the #7163 timeframe.
We're discussing this on chat currently. It might break the intellisense
on the `#include <winrt/Microsoft.Terminal.TerminalControl.h>` line in
VS 16.7, but we're not _really_ sure? Intellisense has been notoriously
flaky for us.
I'm running 16.6.5, and it works for me. @lhecker is running 16.7 and
confirmed it worked there. If the CI build passes, then this definitely
will work for 16.7.
This script takes a range of commits and generates a commit log with the
git2git-excluded file changes filtered out.
It also replaces GitHub issue numbers with GH-XXX so as to not confuse
Git2Git or Azure DevOps. Community contributions are tagged with CC- so
they can be detected later.
The output looks like this:
```
Carlos Zamora (2)
* Pass mouse button state into HandleMouse instead of asking win32 (GH-6765)
Dustin L. Howett (6)
* Disable MinimalCoreWin when OpenConsoleUniversalApp is false (GH-7203)
James Holderness (1)
* Add support for the "doubly underlined" graphic rendition attribute (CC-7223)
```
Yes, the numbers are wrong. No, it doesn't really matter.
If you scroll up to view the scrollback, then we want the viewport to
"stay in place", as new output comes in (see #6062). This works fine up
until the buffer circles. In this case, the mutable viewport isn't
actually moving, so we never set `updatedViewport` to true.
This regressed in #6062Closes#7222
This pull request completes (and somewhat rewrites) the JsonUtils error
handling arc. Deserialization errors, no longer represented by trees of
exceptions that must be rethrown and caught, are now transformed at
catch time into a message explaining what we expected and where we
expected it.
Instead of exception trees, a deserialization failure will result in a
single type of exception with the originating JSON object from which we
can determine the contents and location of the failure.
Because most of the error message actually comes from the JSON schema
or the actual supported types, and the other jsoncpp errors are not
localized I've made the decision to **not** localize these messages.
## Summary of the Pull Request
This PR adds the Advanced Tab Switcher (ATS) to Terminal. It'll work
similarly to VSCode's tab switcher. Because this implementation rides
off a lot of the Command Palette's XAML code, it'll look just like the
Command Palette, and also have support for tab title search.
## References
#3753 - ATS Spec
Closes#1502
The "default profile as name" feature in 1.1 broke the loading of
default settings, as we would never get to the validation phase where
the default profile string was transformed into a guid.
I moved knowledge of the "unparsed default profile" optional to the
consumer so that we could make sure we only attempted to deserialize it
once (and only if it was present.)
Fixes#7236.
## PR Checklist
* [x] Closes#7236
## Summary of the Pull Request
We're expecting that people have treated `padding` as an integer, and the type-based converter is too strict for that. This PR widens its scope and explicitly allows for it in the schema.
## PR Checklist
* [x] Closes#7234
This PR adds support for the ANSI _doubly underlined_ graphic rendition
attribute, which is enabled by the `SGR 21` escape sequence.
There was already an `ExtendedAttributes::DoublyUnderlined` flag in the
`TextAttribute` class, but I needed to add `SetDoublyUnderlined` and
`IsDoublyUnderlined` methods to access that flag, and update the
`SetGraphicsRendition` methods of the two dispatchers to set the
attribute on receipt of the `SGR 21` sequence. I also had to update the
existing `SGR 24` handler to reset _DoublyUnderlined_ in addition to
_Underlined_, since they share the same reset sequence.
For the rendering, I've added a new grid line type, which essentially
just draws an additional line with the same thickness as the regular
underline, but slightly below it - I found a gap of around 0.05 "em"
between the lines looked best. If there isn't enough space in the cell
for that gap, the second line will be clamped to overlap the first, so
you then just get a thicker line. If there isn't even enough space below
for a thicker line, we move the offset _above_ the first line, but just
enough to make it thicker.
The only other complication was the update of the `Xterm256Engine` in
the VT renderer. As mentioned above, the two underline attributes share
the same reset sequence, so to forward that state over conpty we require
a slightly more complicated process than with most other attributes
(similar to _Bold_ and _Faint_). We first check whether either underline
attribute needs to be turned off to send the reset sequence, and then
check individually if each of them needs to be turned back on again.
## Validation Steps Performed
For testing, I've extended the existing attribute tests in
`AdapterTest`, `VTRendererTest`, and `ScreenBufferTests`, to make sure
we're covering both the _Underlined_ and _DoublyUnderlined_ attributes.
I've also manually tested the `SGR 21` sequence in conhost and Windows
Terminal, with a variety of fonts and font sizes, to make sure the
rendering was reasonably distinguishable from a single underline.
Closes#2916
## Summary of the Pull Request
Adds the `setColorScheme` action, to change the color scheme of the active control to one given by the `name` parameter. `name` is required. If `name` is not the name of a color scheme, the action does nothing.
## References
* Being done as a stepping stone to #6689
## PR Checklist
* [x] Closes#5401
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Technically, the action is being done by changing the settings of the current `TerminalSettings` of the `TermControl`. Frankly, it should be operating on a copy of the `TermControl`'s `IControlSettings`, then updating the control's settings, or the Control should just listen for changes to it's setting's properties, and update in real time (without a manual call to `UpdateSettings`. However, both those paths are somewhere unknowable beyond #6904, so we'll just do this for now.
## Validation Steps Performed
* tested manually with a scheme that exists
* tested manually with a scheme that doesn't exist
MouseInput was directly asking user32 about the state of the mouse buttons,
which was somewhat of a layering violation. This commit makes all callers
have to pass the mouse state in themselves.
Closes#4869
This PR adds the `togglePaneZoom` action, which can be used to make a
pane expand to fill the entire contents of the window. A tab that
contains a zoomed pane will have a magnifying glass icon prepended
to its title. Any attempts to manage panes with one zoomed will force
the zoomed pane back to normal size.
VALIDATION
Zoomed in and out a bunch. Tried closing panes while zoomed. Tried
splitting panes while zoomed. Etc.
Closes#996
This PR adds support for per-profile tab colors, in accordance with
#7134. This adds a single `tabColor` property, that when set, specifies
the background color for profile's tab. This color can be overridden by
the color picker, and clearing the color with the color picker will
revert to this default color set for the tab.
* Full theming is covered in #3327 & #5772
Validation: Played with setting this color, both on launch and via
hot-reload
Specified in #7134Closes#1337
Consecutive RTL GlyphRuns are drawn from the last to the first.
References
#538, #7149, all those issues asking for RTL closed as dupes.
As @miniksa suggested in a comment on #7149 -- handle the thingy on the
render side.
If we have GlyphRuns abcdEFGh, where EFG are RTL, we draw them now in
order abcdGFEh.
This has ransom-noting, because I didn't touch the font scaling at all.
This should fix the majority of RTL issues, except it *doesn't* fix
issues with colors, because those get split in the TextBuffer phase in
the renderer I think, so they show up separately by the GlyphRun phase.
## Summary of the Pull Request
Move `ICoreSettings` and `IControlSettings` from the TerminalSettings project to the TerminalCore and TerminalControl projects respectively. Also entirely removes the TerminalSettings project.
The purpose of these interfaces is unchanged. `ICoreSettings` is used to instantiate a terminal. `IControlSettings` (which requires an `ICoreSettings`) is used to instantiate a UWP terminal control.
## References
Closes#7140
Related Epic: #885
Related Spec: #6904
## PR Checklist
* [X] Closes#7140
* [X] CLA signed
* [X] Tests ~added~/passed (no additional tests necessary)
* [X] ~Documentation updated~
* [X] ~Schema updated~
## Detailed Description of the Pull Request / Additional comments
A lot of the work here was having to deal with winmd files across all of these projects. The TerminalCore project now outputs a Microsoft.Terminal.TerminalControl.winmd. Some magic happens in TerminalControl.vcxproj to get this to work properly.
## Validation Steps Performed
Deployed Windows Terminal and opened a few new tabs.
This fixes the build the rest of the way in VS 16.7. Something about the
way we were using the Store/Container flags caused some of our projects
to end up linking kernel32.lib only (MinimalCoreWin==KernelOnly).
The best way to solve it once and for all is to make sure MinimalCoreWin
is always set.
References 313568d0e5.
## Summary of the Pull Request
Adds support for two actions, `closeOtherTabs` and `closeTabsAfter`. Both these actions accept an `index` parameter.
* `closeOtherTabs`: Close tabs other than `index`
* `closeTabsAfter`: Close tabs after `index` (This is also "Close tabs to the right")
## References
* This PR is being made to unblock @RahulRavishankar in #1912
## PR Checklist
* [x] I work here
* [ ] Tests added/passed
* [x] Requires documentation to be updated
* [ ] We should file an issue for "add an `index` param to `closeTab`" to add similar support to the close tab action
* [ ] We should file an issue for "make the `index` param to `closeOtherTabs`, `closeTabsAfter` optional" to make them both work on the _active_ tab when there's no `index` provided
## Validation Steps Performed
* _Verified that_ closing all tabs when I have the `index`'th tab selected _works as expected_
* _Verified that_ closing all tabs when I have a tab other than the `index`'th tab selected _works as expected_
* _Verified that_ closing tabs to the right when I have the `index`'th tab selected _works as expected_
* _Verified that_ closing tabs to the right when I have a tab other than the `index`'th tab selected _works as expected_
- This one has one caveat: for whatever reason, if you run this action when the tab that's currently focused is _before_ the `index` param, then the tabs will expand to fill the entire width of the tab row, until you mouse over them. Probably has something to do with tabs not resizing down until there's a mouse exit event.
I've typed this up way too many times now. I'm sticking this comment in Niksa.md, and if it's ever an insufficient explanation of the differences, we can elaborate.
Up until #4999 we deferred all key events to the character event handler
for which `ToUnicodeEx` returned a valid character and alternatively
those who aren't a special key combination as listed in
`TerminalInput`'s implementation.
Since #4999 we started acknowledging/handling all key events no matter
whether they're actually a known key combination. Given non-ASCII inputs
the Win32 `SendInput()` method generates certain sequences that aren't
recognizable combinations though and if they're handled by the key event
handler no follow up character event is sent containing the unicode
character.
This PR adds another condition and defers all key events without scan
code (i.e. those not representable by the current keyboard layout) to
the character event handler.
I'm absolutely not certain that this PR doesn't have a negative effect
on other kinds of inputs.
Is it common for key events to not contain a scan code? I personally
haven't seen it happen before AutoHotKey/SendInput.
Before this PR is merged it'd be nice to have a good testing plan in
place in order to ensure nothing breaks.
## Validation Steps Performed
Remapped `AltGr+8` to `»` using AutoHotKey using `<^>!8::SendInput {Raw}»`.
Ensured `»` is printed if `AltGr+8` is pressed.
Closes#7064Closes#7120
Carlos Zamora (1)
* UIA: use full buffer comparison in rects and endpoint setter (GH-6447)
Dan Thompson (2)
* Tweaks: normalize TextAttribute method names (adjective form) (GH-6951)
* Fix 'bcz exclusive' typo (GH-6938)
Dustin L. Howett (4)
* Fix VT mouse capture issues in Terminal and conhost (GH-7166)
* version: bump to 1.3 on master
* Update Cascadia Code to 2007.15 (GH-6958)
* Move to the TerminalDependencies NuGet feed (GH-6954)
James Holderness (3)
* Render the SGR "underlined" attribute in the style of the font (CC-7148)
* Add support for the "crossed-out" graphic rendition attribute (CC-7143)
* Refactor grid line renderers with support for more line types (CC-7107)
Leonard Hecker (1)
* Added til::spsc, a lock-free, single-producer/-consumer FIFO queue (CC-6751)
Michael Niksa (6)
* Update TAEF to 10.57.200731005-develop (GH-7164)
* Skip DX invalidation if we've already scrolled an entire screen worth of height (GH-6922)
* Commit attr runs less frequently by accumulating length of color run (GH-6919)
* Set memory order on slow atomics (GH-6920)
* Cache the viewport to make invalidation faster (GH-6918)
* Correct comment in this SPSC test as a quick follow up to merge.
Related work items: MSFT-28208358
I found this while crawling through conhost's WindowIo. Mouse wheel
events come in in screen coordinates, unlike literally every other mouse
event.
The WPF control was doing it wrong.
This pull request fixes capture and event generation in VT mouse mode
for both conhost and terminal.
Fixes#6401.
[1/3] Terminal: clamp mouse events to the viewport, don't throw them away
gnome-terminal (at least) sends mouse events whose x/y are at the
extreme ends of the buffer when a drag starts inside the terminal and
then exits it.
We would previously discard any mouse events that exited the borders of
the viewport. Now we will keep emitting events where X/Y=0/w/h.
[2/3] conhost: clamp VT mouse to viewport, capture pointer
This is the same as (1), but for conhost. conhost wasn't already
capturing the pointer when VT mouse mode was in use. By capturing, we
ensure that events that happen outside the screen still result in events
sent to an application (like a release after a drag)
[3/3] wpf: capture the pointer when VT mouse is enabled
This is the same as (2), but for the WPF control. Clamping is handled
in TerminalCore in (1), so we didn't need to do it in WPF.
Move TerminalSettings object from TerminalSettings project
(Microsoft.Terminal.Settings) to TerminalApp project. `TerminalSettings`
specifically operates as a bridge that exposes any necessary information
to a TerminalControl.
Closes#7139
Related Epic: #885
Related Spec: #6904
## PR Checklist
* [X] Closes#7139
* [X] CLA signed
* [X] Tests ~added~/passed (no additional tests necessary)
* [X] ~Documentation updated~
* [X] ~Schema updated~
## Validation Steps Performed
Deployed Windows Terminal and opened a few new tabs.
Add some user research to determine what the average number of characters a user types before executing a cmdpal action.
This might need to be modified when it merges with #6732
Updates TAEF to 10.57.200731005-develop
## PR Checklist
* [x] Helps #6992 by bringing `wttlog.dll` along with the rest of TAEF.
* [x] I work here.
* [x] Automated tests in CI
* [x] No doc/schema update necessary (checked for docs in this repo)
* [x] Am core contributor.
Co-authored-by: Mike Griese <zadjii@gmail.com>
## Summary of the Pull Request
This spec is a subset of #5772, but specific to per-profile tab colors. We've had enough requests for that in the last few days that I want to pull that feature out into it's own spec, so we can get that approved and implemented in a future-proof way.
> This spec describes a way to specify tab colors in a profile in a way that will
> be forward compatible with theming the Terminal. This spec will be largely
> dedicated to the design of a single setting, but within the context of theming.
>
## PR Checklist
* [x] Specs: #1337
* [x] References: #5772
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
_\*<sup>\*</sup><sub>\*</sub> read the spec <sub>\*</sub><sup>\*</sup>\*_
This PR updates the rendering of the _underlined_ graphic rendition
attribute, using the style specified in the active font, instead of just
reusing the grid line at the bottom of the character cell.
* Support for drawing the correct underline effect in the grid line
renderer was added in #7107.
There was already an `ExtendedAttributes` flag defined for the
underlined state, but I needed to update the `SetUnderlined` and
`IsUnderlined` methods in the `TextAttribute` class to use that flag
now in place of the legacy `LVB_UNDERSCORE` attribute. This enables
underlines set via a VT sequence to be tracked separately from
`LVB_UNDERSCORE` grid lines set via the console API.
I then needed to update the `Renderer::s_GetGridlines` method to
activate the `GridLines::Underline` style when the `Underlined`
attribute was set. The `GridLines::Bottom` style is still triggered by
the `LVB_UNDERSCORE` attribute to produce the bottom grid line effect.
Validation
----------
Because this is a change from the existing behaviour, certain unit tests
that were expecting the `LVB_UNDERSCORE` to be toggled by `SGR 4` and
`SGR 24` have now had to be updated to check the `Underlined` flag
instead.
There were also some UI Automation tests that were checking for `SGR 4`
mapping to `LVB_UNDERSCORE` attribute, which I've now substituted with a
test of the `SGR 53` overline attribute mapping to
`LVB_GRID_HORIZONTAL`. These tests only work with legacy attributes, so
they can't access the extended underline state, and I thought a
replacement test that covered similar ground would be better than
dropping the tests altogether.
As far as the visual rendering is concerned, I've manually confirmed
that the VT underline sequences now draw the underline in the correct
position and style, while grid lines output via the console API are
still displayed in their original form.
Closes#2915
This PR adds support for the ANSI _crossed-out_ graphic rendition
attribute, which is enabled by the `SGR 9` escape sequence.
* Support for the escape sequences and storage of the attribute was
originally added in #2917.
* Support for drawing the strikethrough effect in the grid line renderer
was added in #7107.
Since the majority of the code required for this attribute had already
been implemented, it was just a matter of activating the
`GridLines::Strikethrough` style in the `Renderer::s_GetGridlines`
method when the `CrossedOut` attribute was set.
VALIDATION
There were already some unit tests in place in `VtRendererTest` and the
`ScreenBufferTests`, but I've also now extended the SGR tests in
`AdapterTest` to cover this attribute.
I've manually confirmed the first test case from #6205 now works as
expected in both conhost and Terminal.
Closes#6205
When we added support for win32 input mode, we neglected to pass
`ENHANCED_KEY` through the two surfaces that would generate events. This
broke arrow keys in much the same way was #2397, but in a different
layer.
While I was working on the WPF control, I took a moment to refactor the
message cracking out into a helper. It's a lot easier on the eyes than
four lines of bit shifting repeated three times.
Fixes#7074
Allows splitting pane (with default settings) by holding down ALT and pressing the new tab button ('+')
## PR Checklist
* [X] Closes#6757
* [X] Works here.
* [X] Manual test (below)
* [X] Is core contributor.
## More detailed description
Pretty much exactly the code added in #5928 (all credit to @carlos-zamora), but put at the new tab button event binding
## Validation steps
Seems to work - holding ALT while pressing '+' opens a pane instead of a tab. Holding ALT while starting up terminal for the first time does not seem to affect the behaviour.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 29b1a1d663d0047dc0d2125dd05f75959bca27ef
Related work items: MSFT:27866336
This is a refactoring of the grid line renderers, adjusting the line
widths to scale with the font size, and optimising the implementation to
cut down on the number of draw calls. It also extends the supported grid
line types to include true underlines and strike-through lines in the
style of the active font.
The main gist of the optimisation was to render the horizontal lines
with a single draw call, instead of a loop with lots of little strokes
joined together. In the case of the vertical lines, which still needed
to be handled in a loop, I've tried to move the majority of static
calculations outside the loop, so there is bit of optimisation there
too.
At the same time this code was updated to support a variable stroke
width for the lines, instead of having them hardcoded to 1 pixel. The
width is now calculated as a fraction of the font size (0.025 "em"),
which is still going to be 1 pixel wide in most typical usage, but will
scale up appropriately if you zoom in far enough.
And in preparation for supporting the SGR strike-through attribute, and
true underlines, I've extended the grid line renders with options for
handling those line types as well. The offset and thickness of the lines
is obtained from the font metrics (rounded to a pixel width, with a
minimum of one pixel), so they match the style of the font.
VALIDATION
For now we're still only rendering grid lines, and only the top and
bottom lines in the case of the DirectX renderer in Windows Terminal. So
to test, I hacked in some code to force the renderer to use all the
different options, confirming that they were working in both the GDI and
DirectX renderers.
I've tested the output with a number of different fonts, comparing it
with the same text rendered in WordPad. For the most part they match
exactly, but there can be slight differences when we adjust the font
size for grid alignment. And in the case of the GDI renderer, where
we're working with pixel heights rather than points, it's difficult to
match the sizes exactly.
This is a first step towards supporting the strike-through attribute
(#6205) and true underlines (#2915).
Closes#6911
We've been trying to improve the copy/paste experience with the terminal
in Visual Studio. Once of our problematic scenarios is when the terminal
is connected to a remote environment and the user attempts to
copy/paste. This gets forwarded to the remote shell that copy/paste into
the remote clipboard instead of the local one.
So we opted to add ctrl+shift+c/v to the terminal and need access to the
selected text via the terminal control
VALIDATION
Tested with Visual Studio integrated terminal
- Move to GSL 3.1.0 (GH-6908)
- Replace the color table init code with two const arrays (GH-6913)
- Replace basic_string_view<T> with span<const T> (GH-6921)
- Replace gsl::at with a new til::at(span) for pre-checked bounds (GH-6925)
Related work items: MSFT:27866336
[Git2Git] Git Train: Merge of building/rs_onecore_dep_uxp/200720-1445 into official/rs_onecore_dep_uxp
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 5e1509a00f1acdefe1e6392468ffc9ae44dc89cb
Related work items: MSFT:25731998
* send alt/F10 through the control
We were not listening for WM_SYSKEY{UP,DOWN}
* extract the actual scancode during WM_CHAR, not the bitfield
We were accidentally sending some of the additional keypress data in with
the character event in Win32 Input Mode
* set default fg/bg to campbell
The WPF control starts up in PowerShell blue even though it's not typically used
in PowerShell blue.
* don't rely on the font to determine wideness
This is a cross-port of #2928 to the WPF control
* deterministic shutdown
In testing, I saw a handful of crashes on teardown because we were not shutting
down the render thread properly.
* don't pass 10 for the font weight ...
When Cascadia Code is set, it just looks silly.
* trigger render when selection is cleared, do it under lock
Fixes#6966.
In UiaTextRange, `_getBufferSize` returns an optimized version of the
size of the buffer to be the origin and the last character in the
buffer. This is to improve performance on search or checking if you are
currently on the last word/line.
When setting the endpoint and drawing the bounding rectangles, we should
be retrieving the true buffer size. This is because it is still possible
to create UiaTextRanges that are outside of this optimized size. The
main source of this is `ExpandToEnclosingUnit()` when the unit is
`Document`. The end _should_ be the last visible character, but it isn't
because that would break our tests.
This is an incomplete solution. #6986 is a follow up to completely test
and implement the solution.
The crash in #6402 was caused by getting the document range (a range of
the full text buffer), then moving the end by one character. When we
get the document range, we get the optimized size of the buffer (the
position of the last character). Moving by one character is valid
because the buffer still has more to explore. We then crash from
checking if the new position is valid on the **optimized size**, not the
**real size**.
REFERENCES
#6986 - follow up to properly handle/test this "end of buffer" problem
Closes#6402
Original notes from @M-Pixel:
> Console applications assume that backgrounds are black, and that
> `lightBlack`/`DarkGrey` are lighter than `black`/`Black`. This
> assumption is accounted for by all color schemes in `defaults.json`,
> except for the Solarized themes.
>
> The Solarized Dark theme, in particular, makes `-Parameters` invisible
> against the background in PowerShell, which is obviously an unacceptable
> usability flaw.
>
> This change makes `black` and `background` to the same (which is common
> throughout the color schemes), and makes `brightBlack` (`DarkGray` in
> .NET) lighter than black (which is obviously more correct given the
> meanings of those words).
Out of the box, we ship a pretty bad behavior.
If I look at all of the existing shipped color schemes--and that
includes things like Tango and One Half--we are universally following a
`background` == `black` rule.
If I consult gnome-terminal or xterm, they do the same thing; Xterm by
default, gnome-terminal for solarized. The background generally matches
color index `0` across all their **dark** schemes. Konsole and
lxterminal disagree and map background to `0 intense` for Solarized.
I want to put our Solarized schemes on a deprecation path, but
unfortunately we still need to ship _something_ for users who we're
going to strand on them.
I'm going to have to swallow my bitter and say that yes, we should
probably just change the index mapping and go with something that works
right out of the box while we figure out how to do perceptual color
nudging and eventually remove bad defaults (like Solarized).
From #6618.
Fixes#4047.
Closes#6618.
## Summary of the Pull Request
Adds a execute commandline action (`wt`), which lets a user bind a key to a specific `wt` commandline. This commandline will get parsed and run _in the current window_.
## References
* Related to #4472
* Related to #5400 - I need this for the commandline mode of the Command Palette
* Related to #5970
## PR Checklist
* [x] Closes oh, there's not actually an issue for this.
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - yes it does
## Detailed Description of the Pull Request / Additional comments
One important part of this change concerns how panes are initialized at runtime. We've had some persistent trouble with initializing multiple panes, because they rely on knowing how big they'll actually be, to be able to determine if they can split again.
We previously worked around this by ignoring the size check when we were in "startup", processing an initial commandline. This PR however requires us to be able to know the initial size of a pane at runtime, but before the parents have necessarily been added to the tree, or had their renderer's set up.
This led to the development of `Pane::PreCalculateCanSplit`, which is very highly similar to `Pane::PreCalculateAutoSplit`. This method attempts to figure out how big a pane _will_ take, before the parent has necessarily laid out.
This also involves a small change to `TermControl`, because if its renderer hasn't been set up yet, it'll always think the font is `{0, fontHeight}`, which will let the Terminal keep splitting in the x direction. This change also makes the TermControl set up a renderer to get the real font size when it hasn't yet been initialized.
## Validation Steps Performed
This was what the json blob I was using for testing evolved into
```json
{
"command": {
"action":"wt",
"commandline": "new-tab cmd.exe /k #work 15 ; split-pane cmd.exe /k #work 15 ; split-pane cmd.exe /k media-commandline ; new-tab powershell dev\\symbols.ps1 ; new-tab -p \"Ubuntu\" ; new-tab -p \"haunter.gif\" ; focus-tab -t 0",
},
"keys": ["ctrl+shift+n"]
}
```
I also added some tests.
# TODO
* [x] Creating a `{ "command": "wt" }` action without a commandline will spawn a new `wt.exe` process?
- Probably should just do nothing for the empty string
We spend a lot of time invalidating in the DX Renderer. This is a
creative trick to not bother invalidating any further if we can tell
that the bitmap is already completely invalidated. That is, if we've
scrolled at least an entire screen in height... then the entire bitmap
had to have been marked as invalid as the new areas were "uncovered" by
the `InvalidateScroll` command. So further setting invalid bits on top
of a fully invalid map is pointless.
Note: I didn't use `bitmap::all()` here because it is significantly
slower to check all the bits than it is to just reason out that the
bitmap was already fully marked.
## Validation Steps Performed
- Run `time cat big.txt`. Checked average time before/after, WPR traces
before/after.
The act of calling `InsertAttrRuns` is relatively slow. Instead of
calling it a bunch of times to meddle with colors one cell at a time,
we'll accumulate a length of color and call it to make it act all at
once. This is great for when one color full line is getting replaced
with another color full line OR when a line is being replaced with the
same color all at once. There's significantly fewer checks to be made
inside `InsertAttrRuns` if we can help it out by accumulating the length
of each color before asking it to stitch it into the storage.
Validation
----------
- Run `time cat big.txt` and `time cat ls.txt` under VS Performance
Profiler.
By default, the memory order on atomics is `seq_cst`. This is a relatively expensive ordering and it shows in situations where we're rapidly signaling a consumer to pick up something from a producer. I've instead attempted to switch these to `release` (producer) and `acquire` (consumer) to improve the performance of these signals.
## Validation Steps Performed
- Run `time cat big.txt` and `time cat ls.txt` under VS Performance Profiler.
## PR Checklist
* [x] Closes perf itch
* [x] I work here
* [x] Manual test
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
## Summary of the Pull Request
Text can have various attributes, such as "bold", "italic", "underlined", etc. The TextAttribute class embodies this. It has methods to set/query these attributes.
This change tweaks a few of the method names to make them match. I.e. for an imaginary text property "Foo", we should have methods along the lines of:
```
IsFoo
SetFoo(bool isFoo)
```
And variations should match: we should have "Foo" and "OverFoo", not "Fooey" and "OverFoo".
I chose to standardize on the adjective form, since that's what we are closest to already. The attributes I attacked here are:
SetItalic**s** --> SetItalic
SetUnderline --> SetUnderline**d**
SetOverline --> SetOverline**d**
("italic" is an adjective; "italics" is a plural noun, representing letters or words in an italic typeface)
And I also added methods for "DoublyUnderlined" for good measure.
I stopped short of renaming the GraphicsOptions enum values to match, too; but I'd be willing to do that in a follow-up change if people wanted it.
## Validation Steps Performed
It builds, and tests still pass.
This pull request converts the following JSON deserializers to use the
new JSON deserializer pattern:
* Profile
* Command
* ColorScheme
* Action/Args
* GlobalSettings
* CascadiaSettingsSerialization
This is the completion of a long-term JSON refactoring that makes our
parser and deserializer more type-safe and robust. We're finally able to
get rid of all our manual enum conversion code and unify JSON conversion
around _types_ instead of around _keys_.
I've introduced another file filled with template specializations,
TerminalSettingsSerializationHelpers.h, which comprises a single unit
that holds all of the JSON deserializers (and eventually serializers)
for every type that comes from TerminalApp or TerminalSettings.
I've also moved some types out of Profile and GlobalAppSettings into a
new SettingsTypes.h to improve settings locality.
This does to some extent constitute a breaking change for already-broken
settings. Instead of parsing "successfully" (where invalid values are
null or 0 or unknown or unset), deserialization will now fail when
there's a type mismatch. Because of that, some tests had to be removed.
While I was on a refactoring spree, I removed a number of helpless
helpers, like GetWstringFromJson (which converted a u8 string to an
hstring to make a wstring out of its data pointer :|) and
_ConvertJsonToBool.
In the future, we can make the error types more robust and give them
position and type information such that a conformant application can
display rich error information ("line 3 column 3, I expected a string,
you gave me an integer").
Closes#2550.
After we stood up our own NuGet feed in Azure blob storage, Azure DevOps
came out with a public artifact feed feature. I've migrated all our
packages over, and the only thing left to do is switch our project's
NuGet config to use it.
Fixes#6952
The command palette is a ListView of commands. As you type into the
search box, commands are added or removed from the ListView. Currently,
each update is done by completely clearing the backing list, then adding
back any items that should be displayed. However, this defeats the
ListView's built-in animations: upon every keystroke, ListView displays
its list-clearing animation, then animates the insertion of every item
that wasn't deleted. This results in noticeable flickering.
This PR changes the update logic so that it updates the list using
(roughly) the minimum number of Insert and Remove calls, so the ListView
makes smoother transitions as you type.
I implemented it by keeping the existing code that builds the filtered
list, but I changed it to build into a scratch list. Then I grafted on
a generic delta algorithm to make the real list look like the scratch
list.
To verify the delta algorithm, I tested all 360,000 permutations of
pairs of up to 5 element lists in a toy C# app.
## Validation
I'm not sure if my screen capture tool really caught all the flickering
here, but the screencasts below should give a rough idea of the
difference. (All the flickering was becoming a nuisance while I was
testing out the HC changes.)
See the images in #6939 for more info.
Co-authored-by: Jeffrey Tippet <jtippet@microsoft.com>
In `Renderer::TriggerRedraw`, the act of fetching the viewport from the
`pData` over and over is wasted time. We already have a cached variable
of the viewport that is updated on every scroll check (on
`TriggerScroll` and on `PaintFrame`.) Scrolling wouldn't be working
correctly if the clients weren't already notifying us that the viewport
has changed for scroll purposes, so we can just keep using that cached
value for the invalidation restriction to speed things up over fetching
it again.
## Validation Steps Performed
- Run `time cat big.txt`. Checked average time before/after, WPR traces
before/after.
## PR Checklist
* [x] Closes perf itch
* [x] I work here
* [x] Manual test
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
## Summary of the Pull Request
This PR adds the `til::spsc` namespace, which implements a lock-free, single-producer, single-consumer FIFO queue ("channel"). The queue efficiently blocks the caller using Futexes if no data can be written to / read from the queue (e.g. using `WaitOnAddress` on Windows). Furthermore it allows batching of data and contains logic to signal the caller if the other side has been dropped/destructed.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
`til::spsc::details::arc<T>` contains most of the queue's logic and as such has the relevant documentation for its design.
## Validation Steps Performed
The queue was tested on Windows, Linux and macOS using MSVC, gcc and llvm and each of their available runtime introspection utilities in order to ensure no race conditions or memory leaks occur.
The recent changes to use gsl::span everywhere added a few bounds checks
along codepaths where we were already checking bounds. Some of them may
be non-obvious to the optimizer, so we can now use til::at to help them
along.
To accomplish this, I've added a new overload of til::at that takes a
span and directly accesses its backing buffer.
We were using std::basic_string_view as a stand-in for std::span so that
we could change over all at once when C++20 dropped with full span
support. That day's not here yet, but as of 54a7fce3e we're using GSL 3,
whose span is C++20-compliant.
This commit replaces every instance of basic_string_view that was not
referring to an actual string with a span of the appropriate type.
I moved the `const` qualifier into span's `T` because while
`basic_string_view.at()` returns `const T&`, `span.at()` returns `T&`
(without the const). I wanted to maintain the invariant that members of
the span were immutable.
* Mechanical Changes
* `sv.at(x)` -> `gsl::at(sp, x)`
* `sv.c{begin,end}` -> `sp.{begin,end}` (span's iterators are const)
I had to replace a `std::basic_string<>` with a `std::vector<>` in
ConImeInfo, and I chose to replace a manual array walk in
ScreenInfoUiaProviderBase with a ranged-for. Please review those
specifically.
This will almost certainly cause a code size regression in Windows
because I'm blowing out all the PGO counts. Whoops.
Related: #3956, #975.
This results in smaller code and faster copying. I chose til::color even
though it results in slightly worse codegen (byteswapping in a tight
loop) than COLORREF (SSE-enlightened block copy) because eventually the
internal representations of the color tables will also be til::color and
_then_ it will become a block copy.
This commit adds image assets for High Contrast mode
Tagging this issue so it contains a nice list of all the recent HC
fixes: #5360
I made several changes to DHowett's script and added it to the repo:
* Add support for generating high contrast icons
* Add the ability to easily edit the "intermediate" (previously "zbase")
files for manual hinting
* Appease the spellchecker
I created new SVGs for HC mode. There's one SVG for both Black and White
modes -- I just invert the colors. Then I manually hinted the generated
bitmaps for the production icons. I didn't bother hinting the Dev/Pre
ones, so the text does get unreadable at small sizes.
View the original images in #6915.
Co-authored-by: Jeffrey Tippet <jtippet@microsoft.com>
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
Closes#6822
This PR adds support for always on top mode, via two mechanisms:
* The global setting `alwaysOnTop`. When set to true, the window will be
created in the "topmost" group of windows. Changing this value will
hot-reload whether the window is in the topmost group.
* The action `toggleAlwaysOnTop`, which will toggle the `alwaysOnTop`
property at runtime.
## Detailed Description of the Pull Request / Additional comments
All "topmost" windows maintain an internal z-ordering relative to one
another, but they're all always above all other "non-topmost" windows.
So multiple Windows Terminal windows which are both `alwaysOnTop` will
maintain a z-order relative to one another, but they'll all be on top of
all other windows.
## Validation Steps Performed
Toggled always on top mode, both in the settings and also at runtime,
and verified that it largely did what I expected.
Closes#3038
This adds `nt`, `sp`, and `ft` as aliases for `new-tab`, `split-pane`,
and `focus-tab`, respectively. These do exactly the same thing as their
long for counterparts, but are just shorter, for those of us who type
slower than a fifth grader 👀
Now you can do
```
wt nt cmd.exe /k #work 15 ; sp cmd.exe /k #work 15 ; sp cmd.exe /k
media-commandline ; nt powershell dev\\symbols.ps1 ; nt -p \"Ubuntu\" ;
nt -p \"Ubuntu\" ; ft -t 0
```
instead of
```
new-tab cmd.exe /k #work 15 ; split-pane cmd.exe /k #work 15 ;
split-pane cmd.exe /k media-commandline ; new-tab powershell
dev\\symbols.ps1 ; new-tab -p \"Ubuntu\" ; new-tab -p \"Ubuntu\" ;
focus-tab -t 0
```
The pattern I'm using here is that each of these subcommands now has a
little helper lambda that actually sets up the subcommand with the
required arguments, and we just call that lambda twice, once for the
long-form of the command, and again for the short.
I imagine that in the future, we won't necessarily have short-forms for
every subcommands, so if there are future conflicts we'd have to figure
that out pre-emptively, but these all seem like they'll need a short
form.
Closes#5466
GSL 3, the next major version of GSL after the one we're using, replaced
their local implementation of `span` with one that more closely mimics
C++20's span. Unfortunately, that is a breaking change for all of GSL's
consumers.
This commit updates our use of span to comply with the new changes in
GSL 3.
Chief among those breaking changes is:
* `span::at` no longer exists; I replaced many instances of `span::at`
with `gsl::at(x)`
* `span::size_type` has finally given up on `ptrdiff_t` and become
`size_t` like all other containers
While I was here, I also made the following mechanical replacements:
* In some of our "early standardized" code, we used std::optional's
`has_value` and `value` back-to-back. Each `value` incurs an
additional presence test.
* Change: `x.value().member` -> `x->member` (`optional::operator->`
skips the presence test)
* Change: `x.value()` -> `*x` (as above)
* GSL 3 uses `size_t` for `size_type`.
* Change: `gsl::narrow<size_t>(x.size())` -> `x.size()`
* Change: `gsl::narrow<ptrdiff_t>(nonSpan.size())` -> `nonSpan.size()`
during span construction
I also replaced two instances of `x[x.size() - 1]` with `x.back()` and
one instance of a manual array walk (for comparison) with a direct
comparison.
NOTE: Span comparison and `make_span` are not part of the C++20 span
library.
Fixes#6251
{fmt} 7.0.1 improves binary size, compile-time format string handling,
compile time improvements and named arguments.
In a test Windows build, it shrank our binary by ~14kb.
Closes#6905.
## PR Checklist
* [x] Closes#6905
* [x] CLA
## Summary of the Pull Request
This PR adds support for the `SGR 8` and `SGR 28` escape sequences,
which enable and disable the _concealed/invisible_ graphic rendition
attribute. When a character is output with this attribute set, it is
rendered with the same foreground and background colors, so the text is
essentially invisible.
## PR Checklist
* [x] Closes#6876
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number
where discussion took place: #6876
## Detailed Description of the Pull Request / Additional comments
Most of the framework for this attribute was already implemented, so it
was just a matter of updating the `TextAttribute::CalculateRgbColors`
method to make the foreground the same as the background when the
_Invisible_ flag was set. Note that this has to happen after the
_Reverse Video_ attribute is applied, so if you have white-on-black text
that is reversed and invisible, it should be all white, rather than all
black.
## Validation Steps Performed
There were already existing SGR unit tests covering this attribute in
the `ScreenBufferTests`, and the `VtRendererTest`. But I've added to the
`AdapterTest` which verifies the SGR sequences for setting and resetting
the attribute, and I've extended the `TextAttributeTests` to verify that
the color calculations return the correct values when the attribute is
set.
I've also manually confirmed that we now render the _concealed text_
values correctly in the _ISO 6429_ tests in Vttest. And I've manually
tested the output of _concealed_ when combined with other attributes,
and made sure that we're matching the behaviour of most other terminals.
This parameter was added as a workaround for our fast trackpad
scrolling. Since that was fixed before 1.0 shipped, in #4554, it has
been largely vestigial. There is no reason for us to keep it around any
longer.
It was also the only "logic" in TerminalSettings, which is otherwise a
library that only transits data between two other libraries.
I have not removed it from the schema, as I do not want to mark folks'
settings files invalid to a strict schema parser.
While I was in the area, I added support for "scroll one screen at a
time" (which is represented by the API returning WHEEL_PAGESCROLL),
fixing #5610. We were also storing it in an int (whoops) instead of a
uint.
Fixes#5610
console: switch to /Zc:wchar_t (native wchar_t)
This matches what we use in OpenConsole and makes {fmt} play nice.
I've also removed the workaround we introduced into OutputCellIterator
to work around not using /Zc:wchar_t.
Fixes MSFT:27626309.
Fixes GH-2673.
Retrieved from https://microsoft.visualstudio.com os.2020 OS official/rs_onecore_dep_uxp 1508f7c232ec58bebc37fedfdec3eb8f9bff5502
## Summary of the Pull Request
This PR adds support for the `SGR 2` escape sequence, which enables the
ANSI _faint_ graphic rendition attribute. When a character is output
with this attribute set, it uses a dimmer version of the active
foreground color.
## PR Checklist
* [x] Closes#6703
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. Issue number where discussion took place: #6703
## Detailed Description of the Pull Request / Additional comments
There was already an `ExtendedAttributes::Faint` flag in the
`TextAttribute` class, but I needed to add `SetFaint` and `IsFaint`
methods to access that flag, and update the `SetGraphicsRendition`
methods of the two dispatchers to set the attribute on receipt of the
`SGR 2` sequence. I also had to update the existing `SGR 22` handler to
reset _Faint_ in addition to _Bold_, since they share the same reset
sequence. For that reason, I thought it a good idea to change the name
of the `SGR 22` enum to `NotBoldOrFaint`.
For the purpose of rendering, I've updated the
`TextAttribute::CalculateRgbColors` method to return a dimmer version of
the foreground color when the _Faint_ attribute is set. This is simply
achieved by dividing each color component by two, which produces a
reasonable effect without being too complicated. Note that the _Faint_
effect is applied before _Reverse Video_, so if the output it reversed,
it's the background that will be faint.
The only other complication was the update of the `Xterm256Engine` in
the VT renderer. As mentioned above, _Bold_ and _Faint_ share the same
reset sequence, so to forward that state over conpty we have to go
through a slightly more complicated process than with other attributes.
We first check whether either attribute needs to be turned off to send
the reset sequence, and then check if the individual attributes need to
be turned on again.
## Validation
I've extended the existing SGR unit tests to cover the new attribute in
the `AdapterTest`, the `ScreenBufferTests`, and the `VtRendererTest`,
and added a test to confirm the color calculations when _Faint_ is set
in the `TextAttributeTests`.
I've also done a bunch of manual testing with all the different VT color
types and confirmed that our output is comparable to most other
terminals.
## Summary of the Pull Request
Add support for "focus" mode, which only displays the actual terminal content, no tabs or titlebar. The edges of the window are draggable to resize, but the window can't be moved in borderless mode.
The window looks _slightly_ different bewteen different values for `showTabsInTitlebar`, because switching between the `NonClientIslandWindow` and the `IslandWindow` is _hard_.
`showTabsInTitlebar` | Preview
-- | --
`true` | 
`false` | 
## PR Checklist
* [x] Closes#2238
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* **KNOWN ISSUE**: Upon resizing the NCIW, the top frame margin disappears, making that border disappear entirely. 6356aaf has a bunch of WIP work for me trying to fix that, but I couldn't get it quite right.
## Validation Steps Performed
* Toggled between focus and fullscreen a _bunch_ in both modes.
This commit updates JsonUtilsNew to support winrt
`Windows::Foundation::IReference<T>` as an option type, and cleans up the
optional support code by removing the optional overload on
`GetValue(...)`. Instead of using an overload with a partial
specialization, we're using a constexpr if with a type trait to
determine option-type-ness.
In addition, Carlos reported an issue with deriving from `FlagMapper`
(itself templated) and referring to the base type's members without
fully qualifying them. To make derivation easier, `EnumMapper` and
`FlagMapper` now provide `BaseEnumMapper` and `BaseFlagMapper` type
aliases.
I've taken the opportunity to add a `winrt::hstring` conversion
trait.
Lastly, in casual use, I found out that I'd written the til::color
converter wrong: it supports color strings of length 7 (`#rrggbb`) and
length 4 (`#rgb`). I mistyped (and failed to test) support for 4-length
color strings by pretending they were only 3 characters long.
## References
Merged JsonUtils changes from #6004 and #6590.
## PR Checklist
* [x] Unblocks aforementioned PRs
* [x] cla
* [x] Tests added/passed
* [x] Documentation N/A
* [x] Schema N/A
* [x] Kid tested, mother approved.
Due to a shell limitation, Ctrl+Shift+Enter will not launch Windows
Terminal as Administrator. This is caused by the app execution alias and
the actual targeted executable not having the same name.
In addition, PowerShell has an issue detecting app execution aliases as
GUI/TUI applications. When you run wt from PowerShell, the shell will
wait for WT to exit before returning to the prompt. Having a shim that
immediately re-executes WindowsTerminal and then returns handily knocks
this issue out (as the process that PS was waiting for exits
immediately.)
This could cause a regression for anybody who tries to capture the PID
of wt.exe. Our process tree is not an API, and we have offered no
consistency guarantee on it.
VALIDATION
----------
Tested manual launch in a number of different scenarios:
* [x] start menu "wtd"
* [x] start menu tile
* [x] powertoys run
* [x] powertoys run ctrl+shift (admin)
* [x] powershell inbox, "core"
* [x] cmd
* [x] run dialog
* [x] run dialog ctrl+shift (admin)
* [x] run from a lnk with window mode=maximized
Fixes#4645 (PowerShell waits for wt)
Fixes#6625 (Can't launch as admin using C-S-enter)
This PR adds support for the `DA2` (Secondary Device Attributes) and
`DA3` (Tertiary Device Attributes) escape sequences, which are standard
VT queries reporting basic information about the terminal.
The _Secondary Device Attributes_ response is made up of a number of
parameters:
1. An identification code, for which I've used 0 to indicate that we
have the capabilities of a VT100 (using code 0 for this is an XTerm
convention, since technically DA2 would not have been supported by a
VT100).
2. A firmware revision level, which some terminal emulators use to
report their actual version number, but I thought it best we just
hardcode a value of 10 (the DEC convention for 1.0).
3. Additional hardware options, which tend to be device specific, but
I've followed the convention of the later DEC terminals using 1 to
indicate the presence of a PC keyboard.
The _Tertiary Device Attributes_ response was originally used to provide
a unique terminal identification code, and which some terminal emulators
use as a way to identify themselves. However, I think that's information
we'd probably prefer not to reveal, so I've followed the more common
practice of returning all zeros for the ID.
In terms of implementation, the only complication was the need to add an
additional code path in the `OutputStateMachine` to handle the `>` and
`=` intermediates (technically private parameter prefixes) that these
sequences require. I've done this as a single method - rather than one
for each prefix - since I think that makes the code easier to follow.
VALIDATION
----------
I've added output engine tests to make sure the sequences are dispatched
correctly, and adapter tests to confirm that they are returning the
responses we expect. I've also manually confirmed that they pass the
_Test of terminal reports_ in Vttest.
Closes#5836
This is a refactoring of the renderer color calculations to simplify the
implementation, and to make it easier to support additional
color-altering rendition attributes in the future (e.g. _faint_ and
_conceal_).
## References
* This is a followup to PRs #3817 and #6809, which introduced additional
complexity in the color calculations, and which suggested the need for
refactoring.
## Detailed Description of the Pull Request / Additional comments
When we added support for `DECSCNM`, that required the foreground and
background color lookup methods to be able to return the opposite of
what was requested when the reversed mode was set. That made those
methods unnecessarily complicated, and I thought we could simplify them
considerably just by combining the calculations into a single method
that derived both colors at the same time.
And since both conhost and Windows Terminal needed to perform the same
calculations, it also made sense to move that functionality into the
`TextAttribute` class, where it could easily be shared.
In general this way of doing things is a bit more efficient. However, it
does result in some unnecessary work when only one of the colors is
required, as is the case for the gridline painter. So to make that less
of an issue, I've reordered the gridline code a bit so it at least
avoids looking up the colors when no gridlines are needed.
## Validation Steps Performed
Because of the API changes, quite a lot of the unit tests had to be
updated. For example instead of verifying colors with two separate calls
to `LookupForegroundColor` and `LookupBackgroundColor`, that's now
achieved with a single `LookupAttributeColors` call, comparing against a
pair of values. The specifics of the tests haven't changed though, and
they're all still working as expected.
I've also manually confirmed that the various color sequences and
rendition attributes are rendering correctly with the new refactoring.
There is going to be a very long tail of applications that will
explicitly request VT SGR 40/37 when what they really want is to
SetConsoleTextAttribute() with a black background/white foreground.
Instead of making those applications look bad (and therefore making us
look bad, because we're releasing this as an update to something that
"looks good" already), we're introducing this compatibility quirk.
Before the color reckoning in #6698 + #6506, *every* color was subject
to being spontaneously and erroneously turned into the default color.
Now, only the 16-color palette value that matches the active console
background/foreground color will be destroyed, and only when received
from specific applications.
Removal will be tracked by #6807.
Michael and I discussed what layer this quirk really belonged in. I
originally believed it would be sufficient to detect a background color
that matched the legacy default background, but @j4james provided an
example of where that wouldn't work out (powershell setting the
foreground color to white/gray). In addition, it was too heavyhanded: it
re-broke black backgrounds for every application.
Michael thought that it should live in the server, as a small VT parser
that righted the wrongs coming directly out of the application. On
further investigation, however, I realized that we'd need to push more
information up into the server (so that it could make the decision about
which VT was wrong and which was right) than should be strictly
necessary.
The host knows which colors are right and wrong, and it gets final say
in what ends up in the buffer.
Because of that, I chose to push the quirk state down through
WriteConsole to DoWriteConsole and toggle state on the
SCREEN_INFORMATION that indicates whether the colors coming out of the
application are to be distrusted. This quirk _only applies to pwsh.exe
and powershell.exe._
NOTE: This doesn't work for PowerShell the .NET Global tool, because it
is run as an assembly through dotnet.exe. I have no opinion on how to
fix this, or whether it is worth fixing.
VALIDATION
----------
I configured my terminals to have an incredibly garish color scheme to
show exactly what's going to happen as a result of this. The _default
terminal background_ is purple or red, and the foreground green. I've
printed out a heap of test colors to see how black interacts with them.
Pull request #6810 contains the images generated from this test.
The only color lines that change are the ones where black as a
background or white as a foreground is selected out of the 16-color
palette explicitly. Reverse video still works fine (because black is in
the foreground!), and it's even possible to represent "black on default"
and reverse it into "default on black", despite the black in question
having been `40`.
Fixes#6767.
By storing up the accumulated delta in the mouse input handler, we can
enlighten both conhost and terminal about wheel events that are less
than one line in size. Previously, we had a workaround in conhost that
clamped small scroll deltas to a whole line, which made trackpad
scrolling unimaginably fast. Terminal didn't make this mistake, but it
also didn't handle delta accumulation . . . which resulted in the same
behavior.
MouseInput will now wait until it's received WHEEL_DELTA (well-known
constant, value 120) worth of scrolling delta before it dispatches a
single scroll event.
Future considerations may include sending multiple wheel button events
for every *multiple* of WHEEL_DELTA, but that would be a slightly larger
refactoring that I'm not yet ready to undertake.
There's a chance that we should be dividing WHEEL_DELTA by the system's
"number of lines to scroll at once" setting, because on trackpads
conhost now scrolls a little _slow_. I think the only way to determine
whether this is palatable is to just ship it.
Fixes#6184.
## Summary of the Pull Request
This PR adds full support for the `DECSCNM` reverse screen mode in the Windows Terminal to align with the implementation in conhost.
## References
* The conhost implementation of `DECSCNM` was in PR #3817.
* WT originally inherited that functionality via the colors being passed through, but that behaviour was lost in PR #6506.
## PR Checklist
* [x] Closes#6622
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #6622
## Detailed Description of the Pull Request / Additional comments
The `AdaptDispatch::SetScreenMode` now checks if it's in conpty mode and simply returns false to force a pass-through of the mode change. And the `TerminalDispatch` now has its own `SetScreenMode` implementation that tracks any changes to the reversed state, and triggers a redraw in the renderer.
To make the renderer work, we just needed to update the `GetForegroundColor` and `GetBackgroundColor` methods of the terminal's `IRenderData` implementation to check the reversed state, and switch the colors being calculated, the same way the `LookupForegroundColor` and `LookupBackgroundColor` methods work in the conhost `Settings` class.
## Validation Steps Performed
I've manually tested the `DECSCNM` functionality for Windows Terminal in Vttest, and also with some of my own test scripts.
## Summary of the Pull Request
Updates the Terminal's scroll response to new output. The Terminal will not automatically scroll if...
- a selection is active, or
- the viewport is at the bottom of the scroll history
## References
#2529 - Spec
#3863 - Implementation
## PR Checklist
* [X] Closes#980
* [X] Closes#3863
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Updates the `_scrollOffset` value properly in TerminalCore when the cursor moves. We calculate a new `_scrollOffset` based on if we are circling the buffer and how far below the mutable bottom is.
We specifically check for if a selection is active and if the viewport is at the bottom, then use that as a condition for deciding if we should update `_scrollOffset` to the new calculated value or 0 (the bottom of the scroll history).
## Validation Steps Performed
Manual testing. Though I should add automated tests.
- [X] new output
- [X] new output when circling
- [X] new output when circling and viewport is at the top
Looking up the size of the viewport from the underlying dimensions of
the structures seemed like a good idea at the time (so it would only be
in one place), but it turns out to be more of a perf cost than we
expected. Not necessarily on any one hot path, but if we sort by
functions in WPR, it was the top consumer on the Terminal side. This
instead saves the size as a member of the `TextBuffer` and serves that
out. It only changes when it is constructed or resized traditionally, so
it's easy to update/keep track of. It impacted conhost/conpty to a
lesser degree but was still noticeable.
## Validation Steps Performed
- Run `time cat big.txt` under WPR. Checked before and after perf
metrics.
## PR Checklist
* [x] Closes perf itch
* [x] I work here
* [x] Manual test
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
The main change in 16.7 is the separation of `AppContainerApplication`
into `WindowsStoreApp` and `WindowsAppContainer`. There's been a bit of
interest in splitting packaging away from containment, and this is the
first step in that direction.
We're a somewhat unique application, but as WinUI3 becomes more
prevalent we will become _less_ unique.
Some of these things, I've looked at and wondered how they ever worked.
## PR Checklist
* [x] Closes nothing
## Validation Steps Performed
Built locally and in CI. Tested the generated package with the package tester. Built on 16.6 and seen that it still seems to work.
A lot of time was spent between each individual line in the VT paint
engine in allocating some scratch space to assemble the clusters then
deallocating it only to have the next line do that again. Now we just
hold onto that memory space since it should be approximately the size of
a single line wide and will be used over and over and over as painting
continues.
## Validation Steps Performed
- Run `time cat big.txt` under WPR. Checked before and after perf
metrics.
## PR Checklist
* [x] Closes perf itch.
* [x] I work here.
* [x] Manual perf test.
* [x] Documentation irrelevant.
* [x] Schema irrelevant.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
Passes the bitmap by ref into the tracing function instead of making a copy on the way in. It's only read anyway for tracing (if enabled) so the copy was a pointless oversight.
## Validation Steps Performed
- Observed WPR trace before and after with `time cat big.txt` in WSL.
This PR enables `ApplicationHighContrastAdjustment::None`. Doing this
disables a set of mitigations in XAML designed to band-aid apps that
were never explicitly designed for High Contrast (HC) modes. Terminal
now has full control of and responsibility for its appearance in HC
mode. This allows Terminal to look a lot better.
On paper, we should be able to set `HighContrastAdjustment="None"` on
the `<Application>` element. But that doesn't have any effect. I don't
know if this is a bug in `<Toolkit:XamlApplication>` or somewhere else.
So instead I set the property in codebehind, which is not as ideal, but
does at least work. I'd love to a way to move this into App.xaml.
The Find box had a couple stray styles to override the ToggleButton's
foreground color. With backplating removed, these styles became
actively harmful (white foreground on highlight color background), so I
just removed them. The built-in style for ToggleButton is perfect
as-is.
Closes#5360
WinUI's `Margin` and `Padding` work very similarly. `Margin` distances
ourselves from our parent. Whereas `Padding` distances our children from
ourselves.
Terminal's `padding` setting is actually implemented by defining
`Margin` on the SwapChainPanel. This means that the "padding" that is
created is actually belongs to SwapChainPanel's parent: Grid (not to be
confused with its parent, "RootGrid").
When a user clicks on the padded area, input goes to Grid. But there's a
twist: you can't actually hit Grid. To be able to hit Grid, you can't
just set IsHitTestVisible. You need to set it's Visibility to Visible,
and it's Background to Transparent (not null) [2].
## Validation Steps Performed
- [X] Start a selection from the padding area
- [X] Click on a SearchBox if one is available
- The SearchBox gets first dibs on the hit test so none gets through
to the SwapChainPanel
## References
[1] https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.uielement.ishittestvisible
[2] https://docs.microsoft.com/en-us/windows/uwp/xaml-platform/events-and-routed-events-overview#hit-testing-and-input-eventsCloses#5626
## Summary of the Pull Request
Pretty straightforward. Logs three scenarios:
* The user opened the command palette (and which mode it was opened in)
* The user ran a command from the palette
* The user dismissed the palette without running an action.
We discussed this in team sync yesterday.
## PR Checklist
* [x] I work here
* [n/a] Requires documentation to be updated
See: https://github.com/microsoft/microsoft-ui-xaml/releases/tag/v2.5.0-prerelease.200609001
> ### Notable Changes:
>
> Resize tab view items only once the pointer has left the TabViewItem strip (microsoft/microsoft-ui-xaml#2569)
> Align TabView visuals with Edge (microsoft/microsoft-ui-xaml#2201)
> Fix background of MenuFlyout in white high contrast (microsoft/microsoft-ui-xaml#2446)
> TabView: Make TabViewItem consume the TabViewItemHeaderForeground theme resource (microsoft/microsoft-ui-xaml#2348)
> TabView: Add tooltips to its scrolling buttons. (microsoft/microsoft-ui-xaml#2369)
* [x] Related to #5360 (@jtippet confirms that this alone does not close it.)
* [x] I work here
## Summary of the Pull Request
In the wake of #6635, a couple things got missed in merges:
* `toggleRetroEffect` didn't get into the schema, nor did `renameTab` or
`commandPalette`.
* `toggleRetroEffect` also didn't get a name
Furthermore, I thought it might be a good idea to start sticking
commands into `bindings` even without `keys`. So I tried doing that for
`opentabColorPicker` and `toggleRetroEffect`, and found immediately that
the labels for the key chord still appear even when the text is empty.
So I added some XAML magic to hide those when the text is empty.
## References
* #6762
* #6691
* #6557
* #6635
## PR Checklist
* [x] Closes#6762
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* See also: https://docs.microsoft.com/en-us/windows/uwp/data-binding/data-binding-quickstart#formatting-or-converting-data-values-for-display
- make sure to switch to C++/WinRT at the top!
## Validation Steps Performed
Removed all my manual actions, ran the Terminal:
## Summary of the Pull Request
This proposes a change to how Terminal will scroll in response to newly
generated output. The Terminal will scroll upon receiving new output if
the viewport is at the bottom of the scroll history and no selection is
active.
This spec also explores the possibility of making this response
configurable with a `snapOnOutput` profile setting. It also discusses
the possibility of adding a scroll lock keybinding action.
## PR Checklist
* [X] Spec for #980
Update colors of our custom NewTab button to match MUX's TabView button
MUX has a NewTab button, but Terminal uses a homemade lookalike. The
version in Terminal doesn't use the same brush color resources as MUX's
button, so it looks very slightly different. This PR updates Terminal's
button to use the exact same colors that MUX uses. I literally copied
these brush names out of MUX source code.
## References
This is the color version of the layout fix#6766
This is a prerequisite for fixing #5360
## Detailed Description of the Pull Request / Additional comments
The real reason that this matters is that once you flip on
`ApplicationHighContrastAdjustment::None`, the existing colors will not
work at all. The existing brushes are themed to black foreground on a
black background when High Contrast (HC) Black theme is enabled. The
only thing that's saving you is
`ApplicationHighContrastAdjustment::Auto` is automatically backplating
the glyphs on the buttons, which (by design) hides the fact that the
colors are poor. The backplates are those ugly squares inside the
buttons on the HC themes.
Before I can push a PR that disables automatic backplating (set
`ApplicationHighContrastAdjustment` to `None`), we'll need to select
better brushes that work in HC mode. MUX has already selected brushes
that work great in all modes, so it just makes sense to use their
brushes.
The one very subtle difference here is that, for non-HC themes, the
glyph's foreground has a bit more contrast when the button is in
hovered/pressed states. Again this slight difference hardly matters
now, but using the correct brushes will become critical when we try to
remove the HC backplating.
Closes#6812
## Summary of the Pull Request
Let's try and figure out just how many people are actually using Solarized. I emailed @DHowett about this a week ago, but otherwise we don't really have any other tasks for this.
## PR Checklist
* [x] I work here
* [n/a] Requires documentation to be updated
The MUX TabView control has a uniquely-shaped [+] button. TerminalApp
doesn't use it: instead, it has a SplitView button that is styled to
look like MUX's official button. However, it doesn't get the button's
shape right. This PR updates TerminalApp's custom button to look more
like MUX's.
The difference is that MUX only rounds the top two corners, and it uses
a bigger radius. Without matching MUX's radius, the upper-left corner
of the button makes an awkward asymmetric divot with the abutting tab.
There's also a spot in the lower-left corner that just looks like
someone accidentally spilled a few pixels on the floor.
Current appearance before this PR:
New appearance with this PR:
Most important deltas highlighted with red circles:
Note that this PR does *not* attempt to fix the colors. The colors are
also just slightly different from what MUX uses. I'll save that for a
separate PR, since all those screenshots would clutter this up this PR.
## Summary of the Pull Request
This PR adds support for the `SGR 53` and `SGR 55` escapes sequences,
which enable and disable the ANSI _overline_ graphic rendition
attribute, the equivalent of the console character attribute
`COMMON_LVB_GRID_HORIZONTAL`. When a character is output with this
attribute set, a horizontal line is rendered at the top of the character
cell.
## PR Checklist
* [x] Closes#6000
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Documentation updated.
* [ ] Schema updated.
* [x] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
To start with, I added `SetOverline` and `IsOverlined` methods to the
`TextAttribute` class, to set and get the legacy
`COMMON_LVB_GRID_HORIZONTAL` attribute. Technically there was already an
`IsTopHorizontalDisplayed` method, but I thought it more readable to add
a separate `IsOverlined` as an alias for that.
Then it was just a matter of adding calls to set and reset the attribute
in response to the `SGR 53` and `SGR 55` sequences in the
`SetGraphicsRendition` methods of the two dispatchers. The actual
rendering was already taken care of by the `PaintBufferGridLines` method
in the rendering engines.
The only other change required was to update the `_UpdateExtendedAttrs`
method in the `Xterm256Engine` of the VT renderer, to ensure the
attribute state would be forwarded to the Windows Terminal over conpty.
## Validation Steps Performed
I've extended the existing SGR unit tests to cover the new attribute in
the `AdapterTest`, the `OutputEngineTest`, and the `VtRendererTest`.
I've also manually tested the `SGR 53` and `SGR 55` sequences to confirm
that they do actually render (or remove) an overline on the characters
being output.
The VT reset operations `RIS` and `DECSTR` are implemented as a series
of steps, each of which could potentially fail. Currently these
operations abort as soon as an error is detected, which is particularly
problematic in conpty mode, where some steps deliberately "fail" to
indicate that they need to be "passed through" to the conpty client. As
a result, the reset won't be fully executed. This PR changes that
behaviour, so the error state is recorded for any failures, but the
subsequent steps are still run.
Originally the structure of these operations was of the form:
bool success = DoSomething();
if (success)
{
success = DoSomethingElse();
}
But I've now changed the code so it looks more like this:
bool success = DoSomething();
success = DoSomethingElse() && success;
This means that every one of the steps should execute, regardless of
whether previous steps were successful, but the final _success_ state
will only be true if none of the steps has failed.
While this is only really an issue in the conhost code, I've updated
both the `AdaptDispatch` and `TerminalDispatch` classes, since I thought
it would be best to have them in sync, and in general this seems like a
better way to handle multi-step operations anyway.
VALIDATION
I've manually tested the `RIS` escape sequence (`\ec`) in the Windows
Terminal, and confirmed that it now correctly resets the cursor
position, which it wasn't doing before.
Closes#6545
Pretty straightforward. `toggleRetroEffect` will work to toggle the
retro terminal effect on/off.
* Made possible by contributions from #6551, _and viewers like you_
This PR fixes the scheme resolution bug outlined in #5326
The approach is as follows:
* In [SchemeManager.cs], find the first scheme parser that actually
successfully parses the scheme, as opposed to the existing code, which
finds the first scheme parser which _says it can parse the scheme_, as
that logic spuriously returns `true` currently.
* In [XmlSchemeParser.cs] and [JsonParser.cs], ensure that the contents
of the file are read and the contents passed to XmlDocument.LoadXXX,
as this fails with an UriException on WSL otherwise.
* Remove `CanParse` as it is superfluous. The check for a valid scheme
parser should not just check an extension but also if the file exists
- this is best done by the `ParseScheme` function as it already
returns null on failure.
* Add `FileExtension` to the interface because we need it lifted now.
Closes#5326
Before sending calling the `HandleClipboardData` member function on
the `PasteFromClipboardEventArgs` object when we receive a request
from the `TermControl` to send it the clipboard's text content, we
now display a warning to let the user choose whether to continue or
not if the text is larger than 5 KiB or contains the _new line_
character, which can be a security issue if the user is pasting the
text in a shell.
These warnings can be disabled with the `largePasteWarning` and
`multiLinePasteWarning` global settings respectively.
Closes#2349
This is essentially a rewrite of the
`TerminalDispatch::SetGraphicsRendition` method, bringing it into closer
alignment with the `AdaptDispatch` implementation, simplifying the
`ITerminalApi` interface, and making the code easier to extend. It adds
support for a number of attributes which weren't previously implemented.
REFERENCES
* This is a mirror of the `AdaptDispatch` refactoring in PR #5758.
* The closer alignment with `AdaptDispatch` is a small step towards
solving issue #3849.
* The newly supported attributes should help a little with issues #5461
(italics) and #6205 (strike-through).
DETAILS
I've literally copied and pasted the `SetGraphicsRendition`
implementation from `AdaptDispatch` into `TerminalDispatch`, with only
few minor changes:
* The `SetTextAttribute` and `GetTextAttribute` calls are slightly
different in the `TerminalDispatch` version, since they don't return a
pointless `success` value, and in the case of the getter, the
`TextAttribute` is returned directly instead of by reference.
Ultimately I'd like to move the `AdaptDispatch` code towards that way
of doing things too, but I'd like to deal with that later as part of a
wider refactoring of the `ConGetSet` interface.
* The `SetIndexedForeground256` and `SetIndexedBackground256` calls
required the color indices to be remapped in the `AdaptDispatch`
implementation, because the conhost color table is in a different
order to the XTerm standard. `TerminalDispatch` doesn't have that
problem, so doesn't require the mapping.
* The index color constants used in the 16-color `SetIndexedForeground`
and `SetIndexedBackground` calls are also slightly different for the
same reason.
VALIDATION
I cherry-picked this code on top of the #6506 and #6698 PRs, since
that's only way to really get the different color formats passed-through
to the terminal. I then ran a bunch of manual tests with various color
coverage scripts that I have, and confirmed that all the different color
formats were being rendered as expected.
Closes#6725
This PR reimplements the VT rendering engines to do a better job of
preserving the original color types when propagating attributes over
ConPTY. For the 16-color renderers it provides better support for
default colors and improves the efficiency of the color narrowing
conversions. It also fixes problems with the ordering of character
renditions that could result in attributes being dropped.
Originally the base renderer would calculate the RGB color values and
legacy/extended attributes up front, passing that data on to the active
engine's `UpdateDrawingBrushes` method. With this new implementation,
the renderer now just passes through the original `TextAttribute` along
with an `IRenderData` interface, and leaves it to the engines to extract
the information they need.
The GDI and DirectX engines now have to lookup the RGB colors themselves
(via simple `IRenderData` calls), but have no need for the other
attributes. The VT engines extract the information that they need from
the `TextAttribute`, instead of having to reverse engineer it from
`COLORREF`s.
The process for the 256-color Xterm engine starts with a check for
default colors. If both foreground and background are default, it
outputs a SGR 0 reset, and clears the `_lastTextAttribute` completely to
make sure any reset state is reapplied. With that out the way, the
foreground and background are updated (if changed) in one of 4 ways.
They can either be a default value (SGR 39 and 49), a 16-color index
(using ANSI or AIX sequences), a 256-color index, or a 24-bit RGB value
(both using SGR 38 and 48 sequences).
Then once the colors are accounted for, there is a separate step that
handles the character rendition attributes (bold, italics, underline,
etc.) This step must come _after_ the color sequences, in case a SGR
reset is required, which would otherwise have cleared any character
rendition attributes if it came last (which is what happened in the
original implementation).
The process for the 16-color engines is a little different. The target
client in this case (Windows telnet) is incapable of setting default
colors individually, so we need to output an SGR 0 reset if _either_
color has changed to default. With that out the way, we use the
`TextColor::GetLegacyIndex` method to obtain an approximate 16-color
index for each color, and apply the bold attribute by brightening the
foreground index (setting bit 8) if the color type permits that.
However, since Windows telnet only supports the 8 basic ANSI colors, the
best we can do for bright colors is to output an SGR 1 attribute to get
a bright foreground. There is nothing we can do about a bright
background, so after that we just have to drop the high bit from the
colors. If the resulting index values have changed from what they were
before, we then output ANSI 8-color SGR sequences to update them.
As with the 256-color engine, there is also a final step to handle the
character rendition attributes. But in this case, the only supported
attributes are underline and reversed video.
Since the VT engines no longer depend on the active color table and
default color values, there was quite a lot of code that could now be
removed. This included the `IDefaultColorProvider` interface and
implementations, the `Find(Nearest)TableIndex` functions, and also the
associated HLS conversion and difference calculations.
VALIDATION
Other than simple API parameter changes, the majority of updates
required in the unit tests were to correct assumptions about the way the
colors should be rendered, which were the source of the narrowing bugs
this PR was trying to fix. Like passing white on black to the
`UpdateDrawingBrushes` API, and expecting it to output the default `SGR
0` sequence, or passing an RGB color and expecting an indexed SGR
sequence.
In addition to that, I've added some VT renderer tests to make sure the
rendition attributes (bold, underline, etc) are correctly retained when
a default color update causes an `SGR 0` sequence to be generated (the
source of bug #3076). And I've extended the VT renderer color tests
(both 256-color and 16-color) to make sure we're covering all of the
different color types (default, RGB, and both forms of indexed colors).
I've also tried to manually verify that all of the test cases in the
linked bug reports (and their associated duplicates) are now fixed when
this PR is applied.
Closes#2661Closes#3076Closes#3717Closes#5384Closes#5864
This is only a partial fix for #293, but I suspect the remaining cases
are unfixable.
Essentially what this does is map the default legacy foreground and
background attributes (typically white on black) to the `IsDefault`
color type in the `TextColor` class. As a result, we can now initialize
the buffer for "legacy" shells (like PowerShell and cmd.exe) with
default colors, instead of white on black. This fixes the startup
rendering in conpty clients, which expect an initial default background
color. It also makes these colors update appropriately when the default
palette values change.
One complication in getting this to work, is that the console permits
users to change which color indices are designated as defaults, so we
can't assume they'll always be white on black. This means that the
legacy-to-`TextAttribute` conversion will need access to those default
values.
Unfortunately the defaults are stored in the conhost `Settings` class
(the `_wFillAttribute` field), which isn't easily accessible to all the
code that needs to construct a `TextAttribute` from a legacy value. The
`OutputCellIterator` is particularly problematic, because some iterator
types need to generate a new `TextAttribute` on every iteration.
So after trying a couple of different approaches, I decided that the
least worst option would be to add a pair of static properties for the
legacy defaults in the `TextAttribute` class itself, then refresh those
values from the `Settings` class whenever the defaults changed (this
only happens on startup, or when the conhost _Properties_ dialog is
edited).
And once the `TextAttribute` class had access to those defaults, it was
fairly easy to adapt the constructor to handle the conversion of default
values to the `IsDefault` color type. I could also then simplify the
`TextAttribute::GetLegacyAttributes` method which does the reverse
mapping, and which previously required the default values to be passed
in as a parameter
VALIDATION
I had to make one small change to the `TestRoundtripExhaustive` unit
test which assumed that all legacy attributes would convert to legacy
color types, which is no longer the case, but otherwise all the existing
tests passed as is. I added a new unit test verifying that the default
legacy attributes correctly mapped to default color types, and the
default color types were mapped back to the correct legacy attributes.
I've manually confirmed that this fixed the issue raised in #5952,
namely that the conhost screen is cleared with the correct default
colors, and also that it is correctly refreshed when changing the
palette from the properties dialog. And I've combined this PR with
#6506, and confirmed that the PowerShell and the cmd shell renderings in
Windows Terminal are at least improved, if not always perfect.
This is a prerequisite for PR #6506Closes#5952
With this commit, terminal will be able to copy text to the system
clipboard by using OSC 52 MANIPULATE SELECTION DAATA.
We chose not to implement the clipboard querying functionality offered
by OSC 52, as sending the clipboard text to an application without the
user's knowledge or consent is an immense security hole.
We do not currently support the clipboard specifier Pc to specify which
clipboard buffer should be filled
# Base64 encoded `foo`
$ echo -en "\e]52;;Zm9v\a"
# Multiple lines
# Base64 encoded `foo\r\nbar`
$ echo -en "\e]52;;Zm9vDQpiYXI=\a"
Closes#2946.
Restores the simple text run analysis and skipping of most of the
shaping/layout steps. Corrects one of the fast-path steps to ensure that
offsets and clusters are assigned.
## References
- Bug #6488
- Bug #6664
- Simple run PR #6206
- Simple run revert PR #6665
- Recycle glyph runs PR #6483
The "correction" functions, by which box drawing analysis is one of
them, is dependent on the steps coming before it properly assigning the
four main vectors of the text layout glyphs: indices, advances, offsets,
and clusters. When the fast path is identified by the code from #6206,
only two of those are fully updated: indices and advances. The offsets
doesn't tend to cause a problem because offsets are rarely used so
they're pretty much always 0 already (but this PR enforces that they're
zero for the simple/fast path.) The clusters, however, were not mapped
for the fast path. This showed itself in one of two ways:
1. Before the recycled runs PR #6483, the cluster map had a 0 in every
field for the stock initialized vector.
2. After the recycled runs PR #6483, the cluster map had the previous
run's mapping in it.
This meant that when we reached the steps where glyph runs were
potentially split during the correction phase for box drawing
characters, unexpected values were present to map the glyph indices to
clusters and were corrected, adjusted, or split in an unexpected
fashion.
For instance, the index out of range bug could appear when the default 0
values appended to the end of the clusters vector were decremented down
to a negative value during the run splitter as the true DWrite cluster
mapper doesn't generate that sort of pattern in the slow path case
without also breaking the run itself.
The resolution here is therefore to ensure that all of the fields
related to glyph layout are populated even in the fast path. This
doesn't affect the slow path because that one always populated all
fields by asking DWrite to do it. The fast path just skips a bunch of
DWrite steps because it can implicitly identify patterns and save a
bunch of time.
I've also identified a few vectors that weren't cleared on reset/reuse
of the layout. I'm clearing those now so the `.resize()` operations
performed on them to get to the correct lengths will fill them with
fresh and empty values instead of hanging on to ones that may have been
from the previous. This should be OK memory perf wise because the act of
`.clear()` on a vector shouldn't free anything, just mark it invalid.
And doing `.resize()` from an empty one should just default construct
them into already allocated space (which ought to be super quick).
## Validation
* [x] Far.exe doesn't crash and looks fine
* [x] "\e[30;47m\u{2500} What \u{2500}\e[m" from #6488 appears
appropriately antialiased
* [x] Validate the "\e[30;47m\u{2500} What \u{2500}\e[m" still works
when `FillGeometry` is nerfed as a quick test that the runs are split
correctly.
* [x] Put `u{fffd} into Powershell Core to make a replacement char in
the output. Then press enter a few times and see that shrunken initial
characters on random rows. Verify this is gone.
Closes#6668Closes#6669
Co-Authored-By: Chester Liu <skyline75489@outlook.com>
## Summary of the Pull Request
This adds a first iteration on the command palette. Notable missing features are:
* Commandline mode: This will be a follow-up PR, following the merge of #6537
* nested and iterable commands: These will additionally be a follow-up PR.
This is also additionally based off the addenda in #6532.
This does not bind a key for the palette by default. That will be done when the above follow-ups are completed.
## References
* #2046 - The original command palette thread
* #5400 - This is the megathread for all command palette issues, which is tracking a bunch of additional follow up work
* #5674 and #6532 - specs
* #6537 - related
## PR Checklist
* [x] Closes#2046
- incidentally also closes#6645
* [x] I work here
* [x] Tests added/passed
* [ ] Requires documentation to be updated - delaying this until it's more polished.
## Detailed Description of the Pull Request / Additional comments
* There's a lot of code for autogenerating command names. That's all in `ActionArgs.cpp`, because each case is so _not_ boilerplate, unlike the rest of the code in `ActionArgs.h`.
## Validation Steps Performed
* I've been playing with this for months.
* Tests
* Selfhost with the team
Occasionally, we get users with corrupt PATH environment variables: they
can't lauch PowerShell, because for some reason it's dropped off their
PATH. We also get users who have stray applications named
`powershell.exe` just lying around in random system directories.
We can combat both of these issues by simply hardcoding where we expect
PowerShell and CMD to live. %SystemRoot% was chosen over %WINDIR%
because apparently (according to Stack Overflow), SystemPath is
read-only and WINDIR isn't.
Refs #6039, #4390, #4228 (powershell was not found)
Refs #4682, Fixes#6082 (stray powershell.exe)
## Summary of the Pull Request
Adds a pair of `ShortcutAction`s for setting the tab color.
* `setTabColor`: This changes the color of the current tab to the provided color, or can be used to clear the color.
* `openTabColorPicker`: This keybinding immediately activates the tab color picker for the currently focused tab.
## References
## PR Checklist
* [x] scratches my own itch
* [x] I work here
* [x] Tests added/passed
* [x] https://github.com/MicrosoftDocs/terminal/pull/69
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
* hey look there are tests
* Tested with the following:
```json
// { "command": "setTabColor", "keys": [ "alt+c" ] },
{ "keys": "ctrl+alt+c", "command": { "action": "setTabColor", "color": "#123456" } },
{ "keys": "alt+shift+c", "command": { "action": "setTabColor", "color": null} },
{ "keys": "alt+c", "command": "openTabColorPicker" },
```
This pull request implements shift+double/triple click. Proper behavior
(as described in #4557) is to only expand one selection point, not both.
Adding the `bool targetStart` was a bit weird. I decided on this being
the cleanest approach though because I still want `PivotSelection` to be
its own helper function. Otherwise, the concept of "pivoting" gets kinda
messy.
## Validation Steps Performed
Manual testing as described on attached issue.
Tests were added for Shift+Click and pivoting the selection too.
Closes#4557
This reverts commit 94eab6e391.
We'll reintroduce this again after making sure it plays nicely with
recycling and box drawing glyphs.
Fixes#6488Fixes#6664
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add keybinding for renaming a tab
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Fulfills format requirements set by #6567
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests passed
* [X] Requires documentation to be updated
* [X] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #6567 and here (#6557)
This no longer c loses #6256, as the spec changed.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
* Update _TerminalCursorPositionChanged to use ThrottledFunc.
* Rename previous ThrottledFunc to ThrottledArgFunc because now
ThrottledFunc is for functions that do not take an argument.
* Update ThrottledFunc and ThrottledArgFunc to accept a CoreDispatcher
on which the function should be called for convenience.
* Don't use coroutines/winrt::fire_and_forget in
ThrottledFunc/ThrottledArgFunc because they are too slow (see PR).
_AdjustCursorPosition went from 17% of samples to 3% in performance
testing.
Replace std::map with std::unordered_map when the order doesn't matter
and hash functions are provided. Simple optimizations, but I expect the
performance should be strictly better, especially for
CodepointWidthDetector.hpp.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Many places in this codebase has an equality comparison to the boolean FALSE. This adds unneeded complexity as C and C++ has a NOT operand for use of these in if statements. This makes the code more readable in those areas.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
One boolean being compared to FALSE was only used once, with the boolean name being "b", so it is better off not existing at all.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Unit Testing passed, compiler refactoring
## Summary of the Pull Request
This is another iteration on the Command Palette spec, from #5674. These were some ideas that were tossed around by @DHowett, @cinnamon-msft and myself, formalized here. I proposed this as an addendum to the original spec, since I think the first made sense atomically, and this only makes sense as a set of changes to the original. I didn't want to go hacking up the original doc to add this set of changes.
**There are two proposals in this spec - they should be viewed as two atomic units. They can be accepted or rejected independently. I'm suggesting we approve both. They work _together_. I'm realizing now that this is worded confusingly, and it's on me to fix that.**
## PR Checklist
* [x] Another spec in the #2046 / #5400 saga
* [x] I work here
* [x] _is a doc_
> ## Abstract
>
> This document is intended to serve as an addition to the [Command Palette Spec].
> While that spec is complete in it's own right, subsequent discussion revealed
> additional ways to improve the functionality and usability of the command
> palette. This document builds largely on the topics already introduced in the
> original spec, so readers should first familiarize themselves with that
> document.
>
> One point of note from the original document was that the original specification
> was entirely too verbose when defining both keybindings and commands for
> actions. Consider, for instance, a user that wants to bind the action "duplicate
> the current pane". In that spec, they need to add both a keybinding and a
> command:
>
> ```json
> {
> "keybindings": [
> { "keys": [ "ctrl+alt+t" ], "command": { "action": "splitPane", "split":"auto", "splitMode": "duplicate" } },
> ],
> "commands": [
> { "name": "Duplicate Pane", "action": { "action": "splitPane", "split":"auto", "splitMode": "duplicate" }, "icon": null },
> ]
> }
> ```
>
> These two entries are practically the same, except for two key differentiators:
> * the keybinding has a `keys` property, indicating which key chord activates the
> action.
> * The command has a `name` property, indicating what name to display for the
> command in the Command Palette.
>
> What if the user didn't have to duplicate this action? What if the user could
> just add this action once, in their `keybindings` or `commands`, and have it
> work both as a keybinding AND a command?
>
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
When the user double clicks on a tab, show the tab rename box
as if they right clicked on the tab and clicked on "Rename".
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6600
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
I added a handler for the `DoubleTapped` event on the tab view item
when we are constructing it for the tab (in `Tab::_MakeTabViewItem`).
The code for that handler was copied the "rename tab menu item" click
handler.
I did not extract the code into a member function because it is very
short (only 2 lines of code) and only used twice so it is not worth
it IMO.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This saves an awful lot of construction/destruction and memory
allocation, especially with text that changes a lot (see: cacafire).
Three things:
1. Recycling the text layouts. This holds onto the `CustomTextLayout` so
all the things that don't change related to drawing targets and
whatnot aren't freed and recreated every frame.
2. Reordering the runs in place. This saves a vector
allocation/copy/delete every time OrderRuns is called. They can be
rearranged in place.
3. Only clip once per row. This reduces the clip push/pop to only one
time per row. Since we're always redrawing an entire row at a time,
this saves a lot of alloc/free of the clip frame, dramatically
reduces queued commands, and makes less work on the flush since
clipping requires staging the drawing and then bringing it back to
the main surface.
I was told that the DeviceContext version supercedes the RenderTarget
one. This moves us to it so we can gain access to a higher level of
control over the various pieces in our pipeline as we continue to evolve
the renderer.
The underlying motivation here is to potentially use a
`ID2D1CommandList` to batch our commands and run them all later outside
the lock. That can only really be done with this more granular level of
control over the pipeline. So this moves to that in a single step that
is easily findable in history should we have problems
I discussed this with @NiklasBorson of the Direct2D/DirectWrite team as
well as with @DHowett before doing it.
## Validation
- [x] Checked docs to make sure that these work on Windows 7 with
Platform Update
- [x] Manual smoke test real quick
- [ ] Try running on Win7 + Platform Update after change
- [x] Probably do more than just a smoke test manually or otherwise
Closes#6525
`bitmap::_calculateArea` performance can be improved by leveraging the
optimized `find_first`/`find_next` methods instead of iterating through
the bitmap manually.
## Summary of the Pull Request
## PR Checklist
* [x] Closes#3927
* [x] I work here.
* [x] Tested manually.
* [x] Requires documentation to be updated: (generate doc bug here)
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- I found four settings that weren't hot reloadable with the 3927 comment above them:
1. Experimental retro terminal effect
2. Experimental software rendering
3. Experimental full repaint rendering
4. Antialiasing settings for text
I made them all hot reloadable by telling the `TermControl` to propagate them on settings change to the `DxEngine`.
Then I set up the `DxEngine` inside the setters to only set them if they changed. And if they do change, to trigger a full repaint and/or a complete drop and recreate of the entire DX device chain (as would happen if it were lost for another reason like a user-mode graphics failure, disconnected display, etc.)
I made the boolean an atomic because the settings can be coming in off of another thread (the XAML eventing one) and the renderer is picking the status up on its thread at the top of the BeginPaint frame.
## Validation Steps Performed
- [x] Opened it up and toggled all the settings while staring at PowerShell
- [x] Opened it up and toggled all the settings while staring at something intensive like a `cacafire` fire
## Summary of the Pull Request
Improve `ATTR_ROW::ReplaceAttrs` performance by only reserving the necessary capacity instead of resizing the new run.
That way `TextAttributeRun`s are only instantiated once instead of twice.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
Performance could be further improved by directly moving `TextAttributeRun`s into the new vector, but I considered this out of scope for this PR.
## Validation Steps Performed
CPU usage when running `cacafire` is slightly reduced.
## Summary of the Pull Request
This PR changes `TermControl::_KeyHandler` to use early returns, which you can think of as "guard clauses".
This has the benefit of a reduced nesting level, easier to understand control flow and opens op the way to more complex conditions.
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Everything still works as expected.
## Summary of the Pull Request
Fixes#6377. `TerminalCore` does not initialize `_altGrAliasing`. The impact is minimized in WT because it defaults to `true` in higher layers. It's not initialized when WPF is driving.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6377
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
Read the [JsonUtils Spec] for more details.
This pull request introduces the next version of JsonUtils. It is in a
separate file for ease of review and testing.
JsonUtilsNew will be renamed in a subsequent commit that rewrites our
JSON deserializers.
### Implementer's Notes
I went with telescoping exceptions for the key parsing code, because
it's totally possible that you can be five keys deep and encounter a
type error. This lets us encode information about all failures in the
chain instead of just the topmost one.
The original JsonUtilsNew code changed to use `decay` everywhere because
the tests wouldn't compile. We want to treat `GetValue<const guid>` _the
same as_ `GetValue<guid>`, and this lets us do so. `decay` is awesome.
I've been developing this with a shim that redirects `JsonUtils.h` to
`JsonUtilsNew.h`. I am not comfortable deleting the original until we've
moved off of it, and that _will_ be the subject of a followup PR.
## Validation Steps Performed
So many tests.
[JsonUtils Spec]: https://github.com/microsoft/terminal/blob/master/doc/cascadia/Json-Utility-API.md
Refs #2550
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This is the spec for the Advanced Tab Switcher. This would allow the user to navigate through a vertical list of tabs through a UI, similar to those found in VSCode and Visual Studio.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#1502: Feature Request: Advanced Tab Switcher
#973: Ctrl+Tab toggling between two tabs
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Spec for #1502
* [x] CLA signed.
## Summary of the Pull Request
Prior to #6309, we'd only snap on input for non-modifier key_down_ events. #6423 fixed this for modifier keys, but didn't fix this for keyups.
## References
* #6423 was an incomplete fix to this problem, which caused this regression
## PR Checklist
* [x] Closes#6481
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Make sure to set the scancode for the manual alt-up's we're sending. If you don't, then terminalInput in the conpty is going to treat that keypress as an actual NUL, and send that to the connected client.
## References
* regressed in #6421
## PR Checklist
* [x] Closes#6513
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested `showkeys -a`
## Summary of the Pull Request
Pulls the `ActionAndArgs` deserializing into its own class, separate from `AppKeyBindings`. Some 2.0 features are going to need to re-use these actions in their json, so we'll want one unified way of deserializing them.
## References
* Done primarily as part of the work on #2046/#5400/#5674
* Also related: #1571/#5888
* Will aggressively conflict with any open PRs that introduced keybindings (looking at #6299)
## PR Checklist
* [x] Closes nothing, this is code refactoring
* [x] I work here
* [x] Current tests passed
* [n/a] Requires documentation to be updated
This commit reverts the removal of the "SSH hack" in #5383. It was
originally added as a solution to #4911, when we realized that SSH would
request the SS3 cursor key encoding but we weren't equipped to handle
it.
A number of folks have filed issues that, in summary, say "when I use
SSH, I can't select/copy/paste text". It turns out that SSH will _also_
pass through requests for mouse input. Terminal dutifully responds to
those requests, of course, by disabling mouse selection/copy/paste. SSH
is **NOT** actually in VT_INPUT_MODE, so it will never receive the mouse
messages.
It's important to note that even with #376 fixed, we are still required
to keep this check. With the closure of #376, we'll be able to convert
VT mouse input back into Win32 mouse input for Win32 applications . . .
but SSH also doesn't know how to handle Win32 mouse input.
Fixes#6476.
Fixes#6196.
Fixes#5704.
Fixes#5608.
This commit adds a fast path to `til::bitmap::translate`: use bit shifts
when the delta is vertical.
Performance while printing the content of a big file, with the patch
from #6492 which hasn't been merged yet, in Release mode:
Before:
* translate represents 13.08% of samples in InvalidateScroll
After:
* translate represents 0.32% of samples in InvalidateScroll
## Validation
Tests passed.
## Summary of the Pull Request
Adds the `target` keybinding arg to `openSettings`. Possible values include: `defaultsFile`, `settingsFile`, and `allFiles`.
## References
#5915 - mini-spec
## PR Checklist
* [x] Closes#2557
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
Implemented as discussed in the attached spec. A new enum will be added for the SettingsUI when it becomes available.
## Validation Steps Performed
Added the following to my settings.json:
```json
{ "command": "openSettings", "keys":... },
{ "command": { "action": "openSettings" }, "keys":... },
{ "command": { "action": "openSettings", "target": "settingsFile" }, "keys":... },
{ "command": { "action": "openSettings", "target": "defaultsFile" }, "keys":... },
{ "command": { "action": "openSettings", "target": "allFiles" }, "keys":... }
```
In addition to the below (original) description, this commit introduces
a ThrottledFunc template that can throttle _any_ function. It applies
that type to muffle updates to the scrollbar.
---
Redo #3531 but without the bug that it caused (#3622) which is why it
was reverted.
I'm sorry if I explain this badly. If you don't understand a part, make
sure to let me know and I will explain it better.
### Explanation
How it worked before: `Terminal` signals that viewport changed ->
`TermControl::_TerminalScrollPositionChanged` gets called on the
terminal thread -> it dispatches work for later to be ran the UI thread
to updates the scrollbar's values
Why it's bad:
* If we have many viewport changes, it will create a long stack of
operations to run. Instead, we should just update the scroll bar with
the most recent information that we know.
* Imagine if the rate that the work gets pushed on the UI thread is
greater than the rate that it can handle: it might freeze?
* No need to be real time, we can wait just a little bit (8ms) to
accumulate viewport changes before we actually change the scroll bar's
value because it appears to be expensive (see perf below).
Now: `Terminal` signals that viewport changed ->
`TermControl::_TerminalScrollPositionChanged` gets called on the
terminal thread -> it tells the `ScrollBarUpdater` about a new update ->
the `ScrollBarUpdater` only runs one job (I don't know if that's the
right term) on the UI thread at a time. If a job is already running but
hasn't updated the scroll bar yet, it changes the setting in the already
existing job to update the scroll bar with the new values. A job "waits"
some time before doing the update to throttle updates because we don't
need real time scroll bar updates. -> eventually, it updates the scroll
bar If the user scrolls when a scroll bar update is pending, we keep the
scroll bar's Maximum and Minimum but let the user choose its new Value
with the `CancelPendingValueChange` method.
### Note
Also I changed a little bit the code from the Terminal to notify the
TermControl less often when possible.
I tried to scroll with the scroll bar, with the mouse wheel. I tried to
scroll while content is being outputted.
I tried to reproduce the crash from #2248 without success (good).
Co-authored-by: Leonard Hecker <leonard@hecker.io>
Closes#3622
For mysterious reasons lost to the sands of time, XAML will _never_ pass
us a VK_MENU event. This is something that'll probably get fixed in
WinUI 3, but considering we're stuck on system XAML for the time being,
the only way to work around this bug is to pass the event through
manually. This change generalizes the F7 handler into a "direct key
event" handler that uses the same focus and tunneling method to send
different key events, and then uses it to send VK_MENU.
## Validation Steps Performed
Opened the debug tap, verified that I was seeing alt key ups.
Also used some alt keybindings to make sure I didn't break them.
Closes#6421
## Summary of the Pull Request
This PR aims to move the command palette spec out of the draft state and into a finalized state for inclusion in the 2.0 version of the Windows Terminal.
Notably, I've added sections regarding the ability to run `wt` commandlines using the Command Palette UI, something we hadn't considered in the original draft, because `wt` commandlines didn't land for like _4 months_ after this first draft.
## References
* #2046 - the original command palette thread
* #2193 - the original draft PR
* #5400 - the new command palette megathread for WT 2.0, which I'll be updating with follow-up tasks as we work on implementing this.
## PR Checklist
* [x] Specs #2046
* [x] I work here
* [x] Is documentation
## Detailed Description of the Pull Request / Additional comments
_read the spec_
* [wpf] WM_KEYUP crashes on x64 #6444
- Turns out that doing the `(uint)lParam` cast worked fine for the
keydowns, because the value of lParam usually didn't have super
high-order bits set. That's not the case for keyups, where the 30th
bit is _always_ set. This is fixed by explicitly getting the byte
with the scancode in it.
* [wpf] WM_KEYUP generates wrong value in Win32 input mode #6445
- This was fixed by basically the same thing as the above.
* [wpf] WPF control crashes on startup trying to render cursor #6446
- This was a regression from #6337. I forgot to initialize the brush
used to paint the cursor, because the UWP version always uses color
(but the WPF one relies on the text foreground color).
* Also adds a minor change to the WPF test app, so that the user can
actually exit `win32-input-mode`.
* #6337 regressed #6446
* #6309 regressed the other two.
Closes#6444Closes#6445Closes#6446
The spec introduces a keybinding argument of 'target' to be able to open a specific settings file. When the Settings UI gets implemented, it will also become an option.
Alternative designs were presented but the 'target' model was decided on.
Bump Newtonsoft.Json from 10.0.3 to 12.0.3
## References
Part of #5297
## PR Checklist
* [ ] Closes (none)
* [x] CLA signed
* [ ] Tests added/passed N/A
* [ ] Requires documentation to be updated N/A
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
CI builds successfully
This pull request reduces input lag, especially with selection, by using
`IDXGISwapChain2::GetFrameLatencyWaitableObject`.
This is based on the [DXGI 1.3 documentation].
Excerpt from the [DXGI 1.3 improvement list]:
> The following functionality has been added in Microsoft DirectX
Graphics Infrastructure (DXGI) 1.3, which is included starting in
Windows 8.1.
Before, during rendering:
1. render frame
2. call `Present` on swap chain:
2.a. blocks until it can present
2.b. meanwhile, selection/text in terminal might have changed, but
we're still using the frame that we rendered before blocking
2.c. presents
After, during rendering:
1. block until we can present
2. render frame with latest data
3. call `Present` on swap chain:
3.a. present without blocking
[DXGI 1.3 documentation]: https://docs.microsoft.com/en-us/windows/uwp/gaming/reduce-latency-with-dxgi-1-3-swap-chains
[DXGI 1.3 improvement list]: https://docs.microsoft.com/en-us/windows/win32/direct3ddxgi/dxgi-1-3-improvements:
## Summary of the Pull Request
Caches vectors in the class and uses a new helper to opportunistically shrink/grow as viewport sizes change in order to save performance on alloc/free of commonly used vectors.
## PR Checklist
* [x] Scratches a perf itch.
* [x] I work here.
* [x] wil tests added
* [x] No add'l doc.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
Two fixes:
1. For outputting lots of text, the base renderer class spent a lot of time allocating and freeing and reallocating the `Cluster` vector that adapts the text buffer information into render clusters. I've now cached this vector in the base render class itself and I shrink/grow it based on the viewport update that happens at the top of every frame. To prevent too much thrashing in the downward/shrink direction, I wrote the `til::manage_vector` helper that contains a threshold to only shrink if it asks for small enough of a size relative to the existing one. I used 80% of the existing size as the threshold for this one.
2. For outputting lots of changing colors, the VT graphics output engine spent a bunch of time allocating and reallocating the vector for `GraphicsOptions`. This one doesn't really have a predictable size, but I never expect it to get extremely big. So I just held it in the base class.
## Validation Steps Performed
* [x] Ran the til unit test
* [x] Checked render cluster vector time before/after against `big.txt` from #1064
* [x] Checked VT graphics output vector time before/after against `cacafire`
Case | Before | After
---|---|---|
`big.txt` |  | 
`cacafire` |  | 
This pull request moves WindowUiaProvider back into Win32 interactivity
and deletes all mention of it from Windows Terminal. Terminal does not
have a single toplevel window that requires Console-like UIA, as each
Xaml control inside it is in charge of its own destiny.
I've also merged `IUiaWindow` and `IConsoleWindow` back together, as
well as `WindowUiaProviderBase` and `WindowUiaProvider`.
Things look a lot more like they did before we tore them apart.
## PR Checklist
* [x] Closes#3564
* [x] CLA
* [x] Tests added/passed (manual)
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already
## Validation
Carlos validated conhost and terminal on this branch.
## Summary of the Pull Request
When someone asked "Do we need to send a F7 keyup too" in #6309, the right answer was actually _no_. Turns out that while XAML will eat the F7 key**down**, it _won't_ eat the F7 key**up**.
## References
* regressed in #6309
## PR Checklist
* [x] Closes#6438
* [x] I work here
* [ ] Tested manually
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Checked this with the debug tap
Does what it says on the label. Pure modifier keys weren't making it
this far at all prior to #6309. This PR changes these methods to make
sure that we only dismiss a selection or snap on input when the key
pressed isn't a modifier key.
## References
* regressed in #6309
## PR Checklist
* [x] Closes#6423
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Tried to repro this in the Terminal, couldn't anymore.
When opening a new tab, it takes a few milliseconds before title to
appears. This PR makes it instantaneous.
* Updated the Terminal so that it can load the title from the settings
before it is initialized.
* Load terminal settings in TermControl constructor before the terminal
is initialized (see above).
* Update Tab so that it sets the TabViewItem's title in the constructor
(in Tab::_MakeTabViewItem) instead of waiting for the VT sequence to
set the title (from what I understand).
NOTE 1: there is a similar problem with the tabview icon which is not
fixed by this PR.
NOTE 2: This is only a problem with animations disabled because
otherwise the title fades in so there is enough time for it to be set
when it becomes visible.
## Validation
I ran the terminal and opened a new tab. The title appears instantly.
This commit introduces a new project that lets you F5 a working instance
of the Wpf Terminal Control.
To make the experience as seamless as possible, I've introduced another
solution platform called "DotNet_x64Test". It is set to build the WPF
projects for "Any CPU" and every project that PublicTerminalCore
requires (including itself) for "x64". This is the only way to ensure
that when you press F5, all of the native and managed dependencies get
updated.
It's all quite cool when it works.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Upload the roadmap for Windows Terminal 2.0 and link to it on the README.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
Remove parentheses from the Preview and Dev build. Now they're called Windows Terminal Preview and Windows Terminal Dev Build respectively.
Also removed them from other identifiers of Terminal for consistency.
## PR Checklist
* [X] Closes#5974
Adds support for `win32-input-mode` to conhost, conpty, and the Windows
Terminal.
* The shared `terminalInput` class supports sending these sequences when
a VT client application requests this mode.
* ConPTY supports synthesizing `INPUT_RECORD`s from the input sent to it
from a terminal
* ConPTY requests this mode immediately on startup (if started with a
new flag, `PSEUDOCONSOLE_WIN32_INPUT_MODE`)
* The Terminal now supports sending this input as well, when conpty asks
for it.
Also adds a new ConPTY flag `PSEUDOCONSOLE_WIN32_INPUT_MODE` which
requests this functionality from conpty, and the Terminal requests this
by default.
Also adds `experimental.input.forceVT` as a global setting to let a user
opt-out of this behavior, if they don't want it / this ends up breaking
horribly.
## Validation Steps Performed
* played with this mode in vtpipeterm
* played with this mode in Terminal
* checked a bunch of scenarios, as outlined in a [comment] on #4999
[comment]: https://github.com/microsoft/terminal/issues/4999#issuecomment-628718631
References #4999: The megathread
References #5887: The spec
Closes#879Closes#2865Closes#530Closes#3079Closes#1119Closes#1694Closes#3608Closes#4334Closes#4446
We're removing this because of MSFT:24623699, which prevents us from being able to do the right thing when we're called on the background of a directory for a range of OS builds.
#6414 will track re-adding this to the Terminal when the original issue is closed.
* [x] closes#6245
* I work here
Wildcards are not allowed in toplevel ItemGroups in vcxproj; they must
be generated by targets.
We mostly use wildcards for pulling in PRI files that are dumped on disk
by the translation tool. We don't want to check those in, so we can't
expand references to them.
To that end, I've introduced a new target that will take a list of
folders containing resw files and expand wildcards under them.
All[1] other wildcards have been moved into their respective targets
_or_ simply expanded.
[1]: Nothing has complained about the resource wildcards in
CascadiaResources.build.items, so I haven't exploded it yet.
Fixes#6214.
This PR provides a faster algorithm for converting 8-bit and 24-bit
colors into the 4-bit legacy values that are required by the Win32
console APIs. It also fixes areas of the code that were incorrectly
using a simple 16-color conversion that didn't handle 8-bit and 24-bit
values.
The faster conversion algorithm should be an improvement for issues #783
and #3950.
One of the main points of this PR was to fix the
`ReadConsoleOutputAttribute` API, which was using a simplified legacy
color conversion (the original `TextAttribute:GetLegacyAttributes`
method), which could only handle values from the 16-color table. RGB
values, and colors from the 256-color table, would be mapped to
completely nonsensical values. This API has now been updated to use the
more correct `Settings::GenerateLegacyAttributes` method.
But there were also a couple of other places in the code that were using
`GetLegacyAttributes` when they really had no reason to be working with
legacy attributes at all. This could result in colors being downgraded
to 4-bit values (often badly, as explained above), when the code was
already perfectly capable of displaying the full 24-bits.
This included the fill colors in the IME composer (in `ConsoleImeInfo`),
and the construction of the highlighting colors in the color
search/selection handler (`Selection::_HandleColorSelection`). I also
got rid of some legacy attribute code in the `Popup` class, which was
originally intended to update colors below the popup when the settings
changed, but actually caused more problems than it solved.
The other major goal of this PR was to improve the performance of the
`GenerateLegacyAttributes` method, since the existing implementation
could be quite slow when dealing with RGB values.
The simple cases are handled much the same as they were before. For an
`IsDefault` color, we get the default index from the
`Settings::_wFillAttribute` field. For an `IsIndex16` color, the index
can just be returned as is.
For an `IsRgb` color, the RGB components are compressed down to 8 bits
(3 red, 3 green, 2 blue), simply by dropping the least significant bits.
This 8-bit value is then used to lookup a representative 16-color value
from a hard-coded table. An `IsIndex256` color is also converted with a
lookup table, just using the existing 8-bit index.
The RGB mapping table was calculated by taking each compressed 8-bit
color, and picking a entry from the _Campbell_ palette that best
approximated that color. This was done by looking at a range of 24-bit
colors that mapped to the 8-bit value, finding the best _Campbell_ match
for each of them (using a [CIEDE2000] color difference calculation), and
then the most common match became the index that the 8-bit value would
map to.
The 256-color table was just a simpler version of this process. For each
entry in the table, we take the default RGB palette value, and find it's
closest match in the _Campbell_ palette.
Because these tables are hard-coded, the results won't adjust to changes
in the palette. However, they should still produce reasonable results
for palettes that follow the standard ANSI color range. And since
they're only a very loose approximation of the colors anyway, the exact
value really isn't that important.
That said, I have tried to make sure that if you take an RGB value for a
particular index in a reasonable color scheme, then the legacy color
mapped from that value should ideally match the same index. This will
never be possible for all color schemes, but I have tweaked a few of the
table entries to improve the results for some of the common schemes.
One other point worth making regarding the hard-coded tables: even if we
wanted to take the active palette into account, that wouldn't actually
be possible over a conpty connection, because we can't easily know what
color scheme the client application is using. At least this way the
results in conhost are guaranteed to be the same as in the Windows
Terminal.
[CIEDE2000]: https://en.wikipedia.org/wiki/Color_difference#CIEDE2000
## Validation Steps Performed
This code still passes the `TextAttributeTests` that check the basic
`GetLegacyAttribute` behaviour and verify the all legacy attributes
roundtrip correctly. However, some of the values in the `RgbColorTests`
had to be updated, since we're now intentionally returning different
values as a result of the changes to the RGB conversion algorithm.
I haven't added additional unit tests, but I have done a lot of manual
testing to see how well the new algorithm works with a range of colors
and a variety of different color schemes. It's not perfect in every
situation, but I think it works well enough for the purpose it serves.
I've also confirmed that the issues reported in #5940 and #6247 are now
fixed by these changes.
Closes#5940Closes#6247
In Windows, we build with /Zc:wchar_t- (which makes wchar_t an unsigned
short typedef.) This causes build breaks when we compare two wchar_t
values (or a wchar_t and an enum class that's of type wchar_t) and the
compiler decides that it might want to _promote them to TextAttribute_
before doing the comparison.
Dustin Howett (1):
Merge remote-tracking branch 'openconsole/inbox' into HEAD
James Holderness (1):
Improve support for VT character sets (CC-4496)
Related work items: MSFT:26791619
## Summary of the Pull Request
When we select a color for the tab, we update the foreground color of the text so that it maintains acceptable contrast with the new tab color. However, we weren't also updating the foreground color of the close button.
This is understandable though, because apparently this wasn't fixable until MUX 2.4 arrived. I'm not a XAML expert, but I know that setting this key only works when we're using MUX 2.4, so I'm assuming something about the TabView implementation changed in that release. _This PR is marked as a draft until #5778 is merged, then I'll re-target to master._
## References
* #5778 - PR to move to MUX 2.4
* This bug was introduced with the tab color picker in #3789
## PR Checklist
* [x] Closes#5780
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
A light tab color:
A dark tab color:
## Summary of the Pull Request
Really couldn't be more starightforward. MUX 2.4 added support for "compact" sized tabs. This PR (targeting the 2.4 PR currently, will move to `master` when that merges) enables users to specify `"tabWidthMode": "compact"` in their global settings to get this behavior.
## References
* #5778 - PR to move to MUX 2.4
* [microsoft-ui-xaml#2016](https://github.com/microsoft/microsoft-ui-xaml/pull/2016) - the MUX PR for compact tab sizing.
* #597 - Tab sizing options?
## PR Checklist
* [x] I don't think we have an issue for this, though I could be wrong.
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
In this screenshot, I'm hovering over tab 2, but the ubuntu tab is focused:
In this screenshot, tab 2 is focused:
This brings support for "Compact" tab sizing, which compresses all inactive tabs to just the size of their icons plus the close button. Neat!
It also just keeps us generally up-to-date and good citizens.
## Summary of the Pull Request
Some people wish to use Ctrl+Alt combinations without Windows treating those as an alias for AltGr combinations. This PR adds a new `altGrAliasing` setting allowing one to control this behavior.
## PR Checklist
* [x] Closes#6211
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Manual testing
* [x] Requires documentation to be updated: https://github.com/MicrosoftDocs/terminal/issues/50
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
* Choose a German keyboard layout
* Using `showkey -a` ensured that both `Ctrl+Alt+Q/E` and `AltGr+Q/E` produce `@/€`
* Added `"altGrAliasing": false` to the WSL profile
* Using `showkey -a` ensured `Ctrl+Alt+Q/E` now produces `^[^Q/E` while `AltGr+Q/E` continues to produce `@/€`
This PR improves our VT character set support, enabling the [`SCS`]
escape sequences to designate into all four G-sets with both 94- and
96-character sets, and supports invoking those G-sets into both the GL
and GR areas of the code table, with [locking shifts] and [single
shifts]. It also adds [`DOCS`] sequences to switch between UTF-8 and the
ISO-2022 coding system (which is what the VT character sets require),
and adds support for a lot more characters sets, up to around the level
of a VT510.
[`SCS`]: https://vt100.net/docs/vt510-rm/SCS.html
[locking shifts]: https://vt100.net/docs/vt510-rm/LS.html
[single shifts]: https://vt100.net/docs/vt510-rm/SS.html
[`DOCS`]: https://en.wikipedia.org/wiki/ISO/IEC_2022#Interaction_with_other_coding_systems
## Detailed Description of the Pull Request / Additional comments
To make it easier for us to declare a bunch of character sets, I've made
a little `constexpr` class that can build up a mapping table from a base
character set (ASCII or Latin1), along with a collection of mappings for
the characters the deviate from the base set. Many of the character sets
are simple variations of ASCII, so they're easy to define this way.
This class then casts directly to a `wstring_view` which is how the
translation tables are represented in most of the code. We have an array
of four of these tables representing the four G-sets, two instances for
the active left and right tables, and one instance for the single shift
table.
Initially we had just one `DesignateCharset` method, which could select
the active character set. We now have two designate methods (for 94- and
96- character sets), and each takes a G-set number specifying the target
of the designation, and a pair of characters identifying the character
set that will be designated (at the higher VT levels, character sets are
often identified by more than one character).
There are then two new `LockingShift` methods to invoke these G-sets
into either the GL or GR area of the code table, and a `SingleShift`
method which invokes a G-set temporarily (for just the next character
that is output).
I should mention here that I had to make some changes to the state
machine to make these single shift sequences work. The problem is that
the input state machine treats `SS3` as the start of a control sequence,
while the output state machine needs it to be dispatched immediately
(it's literally the _Single Shift 3_ escape sequence). To make that
work, I've added a `ParseControlSequenceAfterSs3` callback in the
`IStateMachineEngine` interface to decide which behavior is appropriate.
When it comes to mapping a character, it's simply an array reference
into the appropriate `wstring_view` table. If the single shift table is
set, that takes preference. Otherwise the GL table is used for
characters in the range 0x20 to 0x7F, and the GR table for characters
0xA0 to 0xFF (technically some character sets will only map up to 0x7E
and 0xFE, but that's easily controlled by the length of the
`wstring_view`).
The `DEL` character is a bit of a special case. By default it's meant to
be ignored like the `NUL` character (it's essentially a time-fill
character). However, it's possible that it could be remapped to a
printable character in a 96-character set, so we need to check for that
after the translation. This is handled in the `AdaptDispatch::Print`
method, so it doesn't interfere with the primary `PrintString` code
path.
The biggest problem with this whole process, though, is that the GR
mappings only really make sense if you have access to the raw output,
but by the time the output gets to us, it would already have been
translated to Unicode by the active code page. And in the case of UTF-8,
the characters we eventually receive may originally have been composed
from two or more code points.
The way I've dealt with this was to disable the GR translations by
default, and then added support for a pair of ISO-2022 `DOCS` sequences,
which can switch the code page between UTF-8 and ISO-8859-1. When the
code page is ISO-8859-1, we're essentially receiving the raw output
bytes, so it's safe to enable the GR translations. This is not strictly
correct ISO-2022 behavior, and there are edge cases where it's not going
to work, but it's the best solution I could come up with.
## Validation Steps Performed
As a result of the `SS3` changes in the state machine engine, I've had
to move the existing `SS3` tests from the `OutputEngineTest` to the
`InputEngineTest`, otherwise they would now fail (technically they
should never have been output tests).
I've added no additional unit tests, but I have done a lot of manual
testing, and made sure we passed all the character set tests in Vttest
(at least for the character sets we currently support). Note that this
required a slightly hacked version of the app, since by default it
doesn't expose a lot of the test to low-level terminals, and we
currently identify as a VT100.
Closes#3377Closes#3487
## Summary of the Pull Request
Adds support for trailing commas in our json files.
## References
* Enabled due to the excellent work over in https://github.com/open-source-parsers/jsoncpp/pull/1098
## PR Checklist
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
This is the plan that @miniksa suggested to me. Instead of trying to do lots of work in all the renderers to do backgrounds as one pass, and foregrounds as another, we can localize this change to basically just the DX renderer.
1. First, we give the DX engine a "heads up" on where the cursor is going to be drawn during the frame, in `PrepareRenderInfo`.
- This function is left unimplemented in the other render engines.
2. While printing runs of text, the DX renderer will try to paint the cursor in `CustomTextRenderer::DrawGlyphRun` INSTEAD of `DxEngine::PaintCursor`. This lets us weave the cursor background between the text background and the text.
## References
* #6151 was a spec in this general area. I should probably go back and update it, and we should probably approve that first.
* #6193 is also right up in this mess
## PR Checklist
* [x] Closes#1203
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* This is essentially `"cursorTextColor": "textForeground"` from #6151.
* A follow up work item is needed to add support for the current behavior, (`"cursorTextColor": null`), and hooking up that setting to the renderer.
## Summary of the Pull Request
We have a number of bugs in the Terminal that all have the same singular root cause - VT input does not carry the same fidelity that Win32 input does. For Win32 applications there are certain keystrokes that simply cannot be represented with VT sequences.
This is my proposal for how we'll handle all these cases. I'm proposing a _new VT sequence_, which will enable the Terminal to send input with all of the information that an `INPUT_RECORD` might have, to conpty. There, conpty will be able to send input to the client application with the same fidelity they're used to, enabling these keys to work for those applications once again.
## PR Checklist
* [x] Specs #4999
* [x] I work here
* [x] is a spec
## Detailed Description of the Pull Request / Additional comments
_read the spec_
Running `nuget restore` on every build is pretty unnecessary - usually, you _know_ when you need to run it. For the inner dev loop, this is a few seconds on every `bx` build.
This adds a environment variable you can set to skip the `nuget restore` part of a `bcz` build.
Add the following to your `.razzlerc.cmd`:
```cmd
set _SKIP_NUGET_RESTORE=1
```
and `bcz` (and the other helpers) _won't_ perform a nuget restore on every build.
## Summary of the Pull Request
This pull request removes all of the custom `Get` and `Set` implementations from GlobalAppSettings and replaces them with `GETSET_PROPERTY`. This will be required if we ever convert it to a WinRT class, but for now it's simply niceness-improving.
## References
Required #5847 to land.
## PR Checklist
* [ ] Closes norhing
* [x] CLAd
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already
## Summary of the Pull Request
Restores proper line drawing during IME operations in `conhost`
## PR Checklist
* [x] Closes#803
* [x] I work here.
* [x] Tested manually.
* [x] Check the performance of this and see if it's worse-enough to merit a more confusing algorithm. It was worse for the majority case so I scoped it.
* [x] No doc, it should have worked this way.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- Changed `ConsoleImeInfo::s_ConvertToCells` to be less confusing. It's doing about the same thing, but it's way easier to read now and the compiler/linker/optimizer should just be the same.
- Edited `Renderer::_PaintBufferOutputHelper` to check each attribute for line drawing characters as the right half of a two-col character might have different line drawing characters than the left-half.
## Validation Steps Performed
- [x] Manual operation of IME in conhost with Japanese IME.
- [x] Manual operation of IME in conhost with Chinese IME.
- [x] Manual operation of IME in conhost with Chinese (Traditional) IME.
- [x] Manual operation of IME in conhost with and Korean IME. - @leonMSFT says Korean doesn't work this way. But Korean is broken worse in that it's not showing suggestions at all. Filing new bug. #6227
- [x] Validated against API-filling calls through `SetConsoleTextAttribute` per @j4james's sample code
This commit introduces Generate-CodepointWidthsFromUCD, a powershell
(7+) script that will parse a UCD XML database in the UAX 42 format from
https://www.unicode.org/Public/UCD/latest/ucdxml/ and generate
CodepointWidthDetector's giant width array.
By default, it will emit one UnicodeRange for every range of non-narrow
glyphs with a different Width + Emoji + Emoji Presentation class;
however, it can be run in "packing" and "full" mode.
* Packing mode: ignore the width/emoji/pres class and combine adjacent
runs that CPWD will treat the same.
* This is for optimizing the number of individual ranges emitted
into code.
* Full mode: include narrow codepoints (helpful for visualization)
It also supports overrides, provided in an XML document of the same format
as the UCD itself. Entries in the overrides files are applied after the
entire UCD is read and will replace any impacted ranges.
The output (when packing) looks like this:
```c++
// Generated by Generate-CodepointWidthsFromUCD -Pack:True -Full:False
// on 05/17/2020 02:47:55 (UTC) from Unicode 13.0.0.
// 66182 (0x10286) codepoints covered.
static constexpr std::array<UnicodeRange, 23> s_wideAndAmbiguousTable{
UnicodeRange{ 0xa1, 0xa1, CodepointWidth::Ambiguous },
UnicodeRange{ 0xa4, 0xa4, CodepointWidth::Ambiguous },
UnicodeRange{ 0xa7, 0xa8, CodepointWidth::Ambiguous },
.
.
.
UnicodeRange{ 0x1f210, 0x1f23b, CodepointWidth::Wide },
UnicodeRange{ 0x1f37e, 0x1f393, CodepointWidth::Wide },
UnicodeRange{ 0x100000, 0x10fffd, CodepointWidth::Ambiguous },
};
```
The output (when overriding) looks like this:
```c++
// Generated by Generate-CodepointWidthsFromUCD.ps1 -Pack:True -Full:False -NoOverrides:False
// on 5/22/2020 11:17:39 PM (UTC) from Unicode 13.0.0.
// 321205 (0x4E6B5) codepoints covered.
// 240 (0xF0) codepoints overridden.
static constexpr std::array<UnicodeRange, 23> s_wideAndAmbiguousTable{
UnicodeRange{ 0xa1, 0xa1, CodepointWidth::Ambiguous },
...
UnicodeRange{ 0xfe20, 0xfe2f, CodepointWidth::Narrow }, // narrow combining ligatures (split into left/right halves, which take 2 columns together)
...
UnicodeRange{ 0x100000, 0x10fffd, CodepointWidth::Ambiguous },
};
```
## Summary of the Pull Request
I was debugging the terminal unpackaged, and noticed that this method crashes immediately. I'm gonna bet that this functionality only works when the app is installed as a package. Wrapping this whole method up in one big ol' `try/catch` seems to fix the immediate crash.
## References
* Introduced in #4908
## PR Checklist
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
We _could_ display a warning if the user has this property set and is running the terminal unpackaged, to clue them in that it won't work? I'm willing to file a follow-up for that, but I think we should fix the crash _now_.
## Validation Steps Performed
* Ran the terminal successfully unpackaged.
## Summary of the Pull Request
Adds support for setting the terminal `title` with the commandline argument `--title <title>`.
## PR Checklist
* [x] Closes#6183
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated - probably does, yea
## Detailed Description of the Pull Request / Additional comments
* I wasn't sure how we felt about `-t` being the short version of this argument, so I left it out. If we're cool with that, adding it wouldn't be hard.
## Validation Steps Performed
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
As discussed in #6293 , this PR adds a fade animation to button background when pointer hover ends
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6293
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Added storyboarded coloranimations to the visualstategroup of captionbuttons
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Tested manually
## Summary of the Pull Request
When resizing the window title, a GDI object would be leaked. This has to do with our island message handler using `wil` to track these objects and `wil` having a bug.
## References
microsoft/wil#100
## PR Checklist
* [x] Closes#5949
* [x] I work here.
* [x] Tested manually
* [x] Doc not required.
* [x] Am core contributor.
## Validation Steps Performed
* [x] Added the GDI Objects column to Task Manager, set the Terminal to use the `titleWidth` size tabs, then changed the title a bunch with PowerShell. Confirmed repro before (increasing GDI count). Confirmed it's gone after (no change to object count).
## Summary of the Pull Request
Adds two new flags to the `wt.exe` alias:
* `--maximized,-M`: Launch the new Terminal window maximized. This flag cannot be combined with `--fullscreen`.
* `--fullscreen,-F`: Launch the new Terminal window fullscreen. This flag cannot be combined with `--maximized`.
## References
* This builds on the work done in #6060.
* The cmdline args megathread: #4632
## PR Checklist
* [x] Closes#5801
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
* I had to move the commandline arg parsing up a layer from `TerminalPage` to `AppLogic`, because `AppLogic` controls the Terminal's settings, including launch mode settings. This seems like a reasonable change, to put both the settings from the file and the commandline in the same place.
- **Most of the diff is that movement of code**
* _"What happens when you try to pass both flags, like `wtd -M -F new-tab`?"_:
## Validation Steps Performed
* Ran a bunch of commandlines to see what happened.
## Summary of the Pull Request
This PR adds support for the core VT52 commands, and implements the `DECANM` private mode sequence, which switches the terminal between ANSI mode and VT52-compatible mode.
## References
PR #2017 defined the initial specification for VT52 support.
PR #4044 removed the original VT52 cursor ops that conflicted with VT100 sequences.
## PR Checklist
* [x] Closes#976
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #2017
## Detailed Description of the Pull Request / Additional comments
Most of the work involves updates to the parsing state machine, which behaves differently in VT52 mode. `CSI`, `OSC`, and `SS3` sequences are not applicable, and there is one special-case escape sequence (_Direct Cursor Address_), which requires an additional state to handle parameters that come _after_ the final character.
Once the parsing is handled though, it's mostly just a matter of dispatching the commands to existing methods in the `ITermDispatch` interface. Only one new method was required in the interface to handle the _Identify_ command.
The only real new functionality is in the `TerminalInput` class, which needs to generate different escape sequences for certain keys in VT52 mode. This does not yet support _all_ of the VT52 key sequences, because the VT100 support is itself not yet complete. But the basics are in place, and I think the rest is best left for a follow-up issue, and potentially a refactor of the `TerminalInput` class.
I should point out that the original spec called for a new _Graphic Mode_ character set, but I've since discovered that the VT terminals that _emulate_ VT52 just use the existing VT100 _Special Graphics_ set, so that is really what we should be doing too. We can always consider adding the VT52 graphic set as a option later, if there is demand for strict VT52 compatibility.
## Validation Steps Performed
I've added state machine and adapter tests to confirm that the `DECANM` mode changing sequences are correctly dispatched and forwarded to the `ConGetSet` handler. I've also added state machine tests that confirm the VT52 escape sequences are dispatched correctly when the ANSI mode is reset.
For fuzzing support, I've extended the VT command fuzzer to generate the different kinds of VT52 sequences, as well as mode change sequences to switch between the ANSI and VT52 modes.
In terms of manual testing, I've confirmed that the _Test of VT52 mode_ in Vttest now works as expected.
## Summary of the Pull Request
Users can now open an auto split pane with the mouse.
When opening the dropdown, alt+invoke the profile of choice and it should open in an auto sized pane.
## References
#5025 - further discussion there as to whether this actually closes it.
## Detailed Description of the Pull Request / Additional comments
Had to do a special check for debugTap because that's triggered by holding both alts.
## Validation Steps Performed
alt+click/enter on a new profile. Looks great!
## Summary of the Pull Request
This looks like a big diff, but there's a bunch of existing code that
just got moved around, and there's a cool new Utils template.
The tests all pass, and this passed manual validation. I tried weird
things like "making a profile named `{ }`"
(w/ enough spaces to look like a guid), and yeah it doesn't let you
specify that one as a name, but _why would you do that?!_
Okay, this pull request abstracts the conversion of a profile name into
an optional profile guid out of the "New Terminal Tab Args" handler and
into a common space for all of CascadiaSettings to use.
It also cleans up the conversion of indices and names into optional
GUIDs and turns _those_ into further helpers.
It also introduces a cool new template for running value_or multiple
times on a chain of optionals. CoalesceOptionals is a "choose first,
with fallback" for N>1 optionals.
On top of all this, I've built support for an "unparsed default GUID":
we load the user's defaultProfile as a string, and as part of settings
validation we unpack that string using the helpers outlined above.
## References
Couples well with #5690.
## PR Checklist
* [x] Incidentally fixes#2876
* [x] Core Contributor
* [x] Tests added/passed
* [x] Requires documentation to be updated (done)
* [x] I've discussed this with core contributors already
## Validation Steps Performed
Added additional test collateral to make sure that this works.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR adds a new boolean global setting, startOnUserLogin, along with associated AppLogic to request enabling or disabling of the StartupTask. Added UAP5 extensions to AppX manifests.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#2189
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#2189
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [x] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #2189
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Please note, I'm a non-practicing C++ developer, there are a number of things I wasn't sure how to handle in the appropriate fashion, mostly around error handling and what probably looks like an incredibly naive (and messy) way to implement the async co_await behavior.
Error handling-wise, I found (don't ask me how!) that if you somehow mismatch the startup task's ID between the manifest and the call to `StartupTask::GetAsync(hstring taskId)`, you'll get a very opaque WinRT exception that boils down to a generic invalid argument message. This isn't likely to happen in the wild, but worth mentioning...
I had enough trouble getting myself familiarized with the project, environment, and C++/WinRT in general didn't want to try to tackle adding tests for this quite yet since (as I mentioned) I don't really know what I'm doing. I'm happy to give it a try with perhaps a bit of assistance in getting started 😃
Further work in this area of the application outside of this immediate PR might need to include adding an additional setting to contain launch args that the startup task can pass to the app so that users can specify a non-default profile to launch on start, window position (e.g., #653).
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
✔️ Default settings:
Given the user does not have the `startOnUserLogin` setting in their profile.json,
When the default settings are opened (via alt+click on Settings),
Then the global settings should contain the `"startOnUserLogin": false` token
✔️ Applying setting on application launch
Given the `startOnUserLogin` is `true` and
the `Windows Terminal` startup task is `disabled` and
the application is not running
When the application is launched
Then the `Windows Terminal` entry in the user's Startup list should be `enabled`
✔️ Applying setting on settings change
Given the `startOnUserLogin` is `true` and
the `Windows Terminal` startup task is `enabled` and
the application is running
When the `startOnUserLogin` setting is changed to `false` and
the settings file is saved to disk
Then the `Windows Terminal` startup task entry should be `disabled`
✔️ Setting is ignored when user has manually disabled startup
Given the `startOnUserLogin` is `true` and
the application is not running and
the `Windows Terminal` startup task has been set to `disabled` via user action
When the application is launched
Then the startup task should remain disabled and
the application should not throw an exception
#### note: Task Manager does not seem to re-scan startup task states after launch; the Settings -> Apps -> Startup page also requires closing or moving away to refresh the status of entries
Implements what I was suggesting in #6266 where if a shortcut doesn't
specify an icon, the shortcut target full path is used before searching
for a matching executable in the path.
## References
Found due to not getting the right icon in conhost from the Yori
installer. It's fixed in the installer from
5af366b6a5
for all current users of conhost though, so this PR is just trying to
minimize surprises for the next guy.
## Detailed Description of the Pull Request / Additional comments
I know conhost and shortcut settings aren't really the team's focus
which is why I'm doing this. I understand though if there's a better
way or there are factors that I hadn't considered. Note that the path
searching code is used when programs are launched without using a
shortcut, and it will match if the working directory of the shortcut is
the directory containing the executable.
## Validation Steps Performed
Created a shortcut that didn't specify an icon to a binary that wasn't
in the path, and verified that the icon in the upper left of the console
window could resolve correctly when opening the shortcut. I'm not aware
of a way to get into this path (of launching via a shortcut to a command
line process) without replacing the system conhost, which is what I did
to verify it. In order to diagnose it, I used hardcoded DebugBreak()
since even ImageFileExecutionOptions didn't like running against conhost-
is there are better way to debug and test these cases without being so
invasive on the system?
Closes#6266
For a radio button group to work properly, they need sequential IDs.
This moves the cursor radio buttons on the `conhost` property sheet to
be sequential.
## References
- Introduced with #2663
- Found while investigating #4186
## PR Checklist
* [x] Closes unfiled issue found while investigating #4186
* [x] I work here.
* [x] Manual test.
* [x] No documentation required.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- `CheckRadioButton` takes a contiguous group of IDs. It will set one
item in the list and then uncheck the rest. When a new one was added
to the group, it was added to the end of the segment in the IDs file,
but not immediately after the existing radio buttons. This means it
accidentally turned off all the other buttons in the middle.
- To resolve this, I moved all the cursor buttons into their own
sequential group number and I deprecated the old values.
## Validation Steps Performed
- [x] Ensured that the "Discard Old Duplicates" value was set in the
registry, walked through debugger as `conhost` packed the `TRUE` value
into the property sheet blob, walked through the property sheet
`console.dll` as it unpacked the `TRUE`, then observed that the
checkbox was actually set instead of getting unset by the
`CheckRadioButton` call that went from 107 to 119 and accidentally
unchecked number 112, `IDD_HISTORY_NODUP` even though I swear it was
just set.
## Summary of the Pull Request
Adds `"launchMode": "fullscreen"`, which does what it says on the box.
## PR Checklist
* [x] Closes#288
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
It's important to let the winow get created, _then_ fullscreen it, because otherwise, when the user exits fullscreen, the window is sized to like, 0x0 or something, and that's just annoying.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Updates the check spelling action to [0.0.16-a](https://github.com/check-spelling/check-spelling/releases/tag/0.0.16-alpha)
* update advice -- [sample](57fc13f6c6 (commitcomment-39489723)) -- I really do encourage others to adjust it as desired
* rename `expect` (there are consumers who were not a fan of the `whitelist` nomenclature)
* prune stale items
* some `patterns` improvements to reduce the number of items in `expect`
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
⚠️ Anyone with an inflight addition of a new file to the `whitelist` directory will be moderately unhappy as the action would only use items from there if it didn't find `expect` (and this PR includes the rename).
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Runs should be ~30s faster.
I was hoping to be able to offer the ability to talk to the bot, but sadly that feature is still not quite ready -- and I suspect that I may want to let projects opt in/out of that feature.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
* I added a commit with misspellings: 57fc13f6c6❌ and ran the command it suggested (in bash).
* The commit [itself passes its own testing](78df00dcf6) ✔️
The commands were never `cmd`/`psh` friendly. This iteration is designed to make it easier for a bot to parse and eventually do the work in response to a GitHub request, sadly that feature is behind schedule.
This PR introduces a new `ColorType` to allow us to distinguish between
`SGR` indexed colors from the 16 color table, the lower half of which
can be brightened, and the ISO/ITU indexed colors from the 256 color
table, which have a fixed brightness. Retaining the distinction between
these two types will enable us to forward the correct `SGR` sequences to
conpty when addressing issue #2661.
The other benefit of retaining the color index (which we didn't
previously do for ISO/ITU colors) is that it ensures that the colors are
updated correctly when the color scheme is changed.
## References
* This is another step towards fixing the conpty narrowing bugs in issue
#2661.
* This is technically a fix for issue #5384, but that won't be apparent
until #2661 is complete.
## PR Checklist
* [x] Closes#1223
* [x] CLA signed.
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already.
## Detailed Description of the Pull Request / Additional comments
The first part of this PR was the introduction of a new `ColorType` in
the `TextColor` class. Instead of just the one `IsIndex` type, there is
now an `IsIndex16` and an `IsIndex256`. `IsIndex16` covers the eight
original ANSI colors set with `SGR 3x` and `SGR 4x`, as well as the
brighter aixterm variants set with `SGR 9x` and `SGR 10x`. `IsIndex256`
covers the 256 ISO/ITU indexed colors set with `SGR 38;5` and `SGR
48;5`.
There are two reasons for this distinction. The first is that the ANSI
colors have the potential to be brightened by the `SGR 1` bold
attribute, while the ISO/ITO color do not. The second reason is that
when forwarding an attributes through conpty, we want to try and
preserve the original SGR sequence that generated each color (to the
extent that that is possible). By having the two separate types, we can
map the `IsIndex16` colors back to ANSI/aixterm values, and `IsIndex256`
to the ISO/ITU sequences.
In addition to the VT colors, we also have to deal with the legacy
colors set by the Windows console APIs, but we don't really need a
separate type for those. It seemed most appropriate to me to store them
as `IsIndex256` colors, since it doesn't make sense to have them
brightened by the `SGR 1` attribute (which is what would happen if they
were stored as `IsIndex16`). If a console app wanted a bright color it
would have selected one, so we shouldn't be messing with that choice.
The second part of the PR was the unification of the two color tables.
Originally we had a 16 color table for the legacy colors, and a separate
table for the 256 ISO/ITU colors. These have now been merged into one,
so color table lookups no longer need to decide which of the two tables
they should be referencing. I've also updated all the methods that took
a color table as a parameter to use a `basic_string_view` instead of
separate pointer and length variables, which I think makes them a lot
easier and safer to work with.
With this new architecture in place, I could now update the
`AdaptDispatch` SGR implementation to store the ISO/ITU indexed colors
as `IsIndex256` values, where before they were mapped to RGB values
(which prevented them reflecting any color scheme changes). I could also
update the `TerminalDispatch` implementation to differentiate between
the two index types, so that the `SGR 1` brightening would only be
applied to the ANSI colors.
I've also done a bit of code refactoring to try and minimise any direct
access to the color tables, getting rid of a lot of places that were
copying tables with `memmove` operations. I'm hoping this will make it
easier for us to update the code in the future if we want to reorder the
table entries (which is likely a requirement for unifying the
`AdaptDispatch` and `TerminalDispatch` implementations).
## Validation Steps Performed
For testing, I've just updated the existing unit tests to account for
the API changes. The `TextColorTests` required an extra parameter
specifying the index type when setting an index. And the `AdapterTest`
and `ScreenBufferTests` required the use of the new `SetIndexedXXX`
methods in order to be explicit about the index type, instead of relying
on the `TextAttribute` constructor and the old `SetForeground` and
`SetBackground` methods which didn't have a way to differentiate index
types.
I've manually tested the various console APIs
(`SetConsoleTextAttribute`, `ReadConsoleOutputAttribute`, and
`ReadConsoleOutput`), to make sure they are still setting and reading
the attributes as well as they used to. And I've tested the
`SetConsoleScreenBufferInfoEx` and `GetConsoleScreenBufferInfoEx` APIs
to make sure they can read and write the color table correctly. I've
also tested the color table in the properties dialog, made sure it was
saved and restored from the registry correctly, and similarly saved and
restored from a shortcut link.
Note that there are still a bunch of issues with the color table APIs,
but no new problems have been introduced by the changes in this PR, as
far as I could tell.
I've also done a bunch of manual tests of `OSC 4` to make sure it's
updating all the colors correctly (at least in conhost), and confirmed
that the test case in issue #1223 now works as expected.
This is mostly a codehealth thing - we made these handy macros for just defining basic `{ get; set; }` properties, but we never used them in TerminalSettings, because that file was written before the macros were.
This cleans up that class.
* [x] I work here.
## Summary of the Pull Request
Adds implicit stdexcept header include to u8u16test tool.
## PR Checklist
* [x] Closes regression introduced when moving from VS 16.5 to VS 16.6 (which the CI did of its own accord)
* [x] I work here.
* [x] Built it.
* [x] No doc.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
In VS 16.5, the <stdexcept> header was pulled in by `<string>` or `<string_view>` or `<array>` or `<algorithm>` implicitly. In VS 16.6, that's gone. No one wrote it in the header because it was just automatically there in the past. Now I wrote it in the header.
## Validation Steps Performed
* [x] Built it on my machine after upgrading to VS `16.6.0`.
* [x] Built it in CI.
Fixes#6079 by implementing support for IStorageItem clipboard contents. Manually tested, seems to work for both types of address-copying from Explorer (as well as normal text).
## PR Checklist
* [x] Closes#6079
* Not sure what tests would be useful here, it's mostly to do with what Explorer's doing
Not enormously familiar with C++ or this codebase, so happy to make changes as requested.
## Validation Steps Performed
Ran the terminal, pasted from several different sources (explorer's various copy functions + plaintext)
## Summary of the Pull Request
When using an _Input Method Editor_ in conhost for East Asian languages, the text cursor is temporarily hidden while the characters are being composed. When the composition is complete, the cursor visibility is meant to be restored, but that doesn't always happen if the IME composition is cancelled. This PR makes sure the cursor visibility is always restored, regardless of how the IME is closed.
## PR Checklist
* [x] Closes#810
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
## Detailed Description of the Pull Request / Additional comments
The original implementation hid the cursor whenever `ConsoleImeInfo::WriteCompMessage` was called (which could be multiple times in the course of a composition), and then only restored the visibility when `ConsoleImeInfo::WriteResultMessage` was called. If a composition is cancelled, though, `WriteResultMessage` would never be called, so the cursor visibility wouldn't be restored.
I've now made the `SaveCursorVisibility` and `RestoreCursorVisibility` methods public, so they can instead be called from the `ImeStartComposition` and `ImeEndComposition` functions. This makes sure `RestoreCursorVisibility` is always called, regardless of how the composition ended, and `SaveCursorVisibility` is only called once at the start of the composition (which isn't essential, but seems cleaner to me).
## Validation Steps Performed
I've manually tested opening and closing the IME, both while submitting characters and while cancelling a composition, and in all cases the cursor visibility was correctly restored.
## Summary of the Pull Request
This is an enormously trivial nit - when we launch maximized, we don't draw the maximize button in the "restore" state.
This PR changes the terminal to manually update the Maximize button on launch, once the titlebar is added to the UI tree.
## PR Checklist
* [x] Closes#3440
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
When we maximize the window, shrink the caption buttons (the min, max, close buttons) down to 32px tall, to be the same height as the `TabRowControl`. This way, the tabs will be flush with the top of the display.
## PR Checklist
* [x] Closes#2541
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I tried for a couple hours this morning to do this as a `VisualState`. First I tried doing it as one on the TabRow, which I had very little success with. Then, I eventually realized that the TabRow wasn't even responsible for the padding there, it was being created by the fact that the caption buttons were too tall. Again, I tried to use the existing `VisualState`s they have defined for this, but I couldn't figure out how to do that.
I think the visual state solution would be _cleaner_, so if someone knows how to do that instead, please let me know.
## Validation Steps Performed
* Maximized/restored the Terminal on my display with the taskbar on the bottom
* Maximized/restored the Terminal on my display with the taskbar on the top
There is a range of 216 colors in the default 256-color table that is
meant to be initialized with a 6x6x6 color cube, with each color
component iterating over the values `00`, `5F`, `87`, `AF`, `D7`, and
`FF`. A few of the entries incorrectly had the _red_ component has `DF`,
when it should have been `D7`. This PR corrects those entries. It also
removes a bit of unnecessary whitespace in the first 100 entries.
## Validation Steps Performed
I have a visual test script that renders the full 256-color palette,
using both the indexed color sequence (`SGR 38;5`) and the equivalent
rgb representation (`SGR 38;2`) side by side. Although the difference
was subtle when it was incorrect, I can now see that it has been fixed.
Closes#5994
This removes all glyphs from the emoji list that do not default to
"emoji presentation" (EPres). It removes all local overrides, but retains
the comments about the emoji we left out that are Microsoft-specific.
This brings us fully in line with the most popular Terminals on OS X,
except that we squash our emoji down to fit in one cell and they let
them hang over the edges and damage other characters. Oh well.
## Detailed Description of the Pull Request / Additional comments
Late Friday evening, I tested my emoji test file on iTerm2. In so doing, I realized
that @j4james and @leonMSFT were right the entire time in #5914: Emoji
that require `U+FE0F` must not be double-width by default.
I finally banged up a powershell script that parses the UCD and emits a codepoint
width table. Once checked in, this will be definitive.
Refs #900, #5914.
Fixes#5941.
The `bcz.cmd` script calls a powershell helper script (bx.ps1), but
(previous to this change) did not pass `-NoProfile`, which means that
powershell.exe would load and run one's personal profile script, which
can only slow things down, and worse, can change default behaviors (such
as turning on strict mode by default, which will cause scripts that
don't run cleanly with strict mode to generate lots of errors--such as
bx.ps1).
This change amends the powershell.exe command line to pass -NoProfile,
as well as to set the execution policy and ensure that interactive
prompts can't inadvertently show up (normal best practices for use of
powershell in build scripts).
This change will speed things up (probably negligibly, but still) and
(more importantly) prevent non-determinism and errors that could result
from running people's profile scripts when running the helper bx.ps1.
This pull request moves swaths of Cascadia to use `til::color` for color
interop. There are still some places where we use `COLORREF`, such as in
the ABI boundaries between WinRT components.
I've also added two more til::color helpers - `with_alpha`, which takes
an existing color and sets its alpha component, and a
`Windows::UI::Color` convertor pair.
Future direction might include a `TerminalSettings::Color` type at the
idl boundary so we can finally stop using UInt32s (!) for color.
## Validation Steps Performed
Tested certain fragile areas:
* [x] setting the background with OSC 11
* [x] setting the background when acrylic is in use (which requires
low-alpha)
The AKB serializer is used in the tracelogging pipeline.
Chatted with @zadjii-msft about ganking the deserializers. The form
they'll take in the future is probably very different from this.
We'll need to have some better tracking of the _source_ or _pass_ a
setting was read during so that we can accurately construct an internal
settings attribution model. Diffing was very extremely cool, but we
didn't end up needing it.
This apparently drops our binary size by a whopping _zero bytes_ because
the optimizer was smarter than us and actually totally deleted it.
This seems to be in line with the emoji-sequences table in the latest
version of the Unicode standard: those glyphs require U+FE0F to activate
their emoji presentation. Since we don't support composing U+FE0F, we
should not present them as emoji by default.
Fixes#5910.
Yes, I hate this.
My workflow is to use Sublime's <kbd>Ctrl+P</kbd> shortcut to navigate to files by name. However, the propsheet version of the files _always_ comes up before the `TerminalApp` one does. This results in me having to close the file and re-open the right one.
This PR renames the propsheet one, so it's unambiguous which one I'm opening.
It's really the most trivial nit.
## Summary of the Pull Request
When we're dragging the tab around, if you execute a `ClosePane`/`CloseTab`, then we should make sure to actually activate a new tab, so that focus doesn't just fall into the void.
## References
* This is almost exactly #5799, but with rearranging tabs
## PR Checklist
* [x] Closes#5559
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
We suppress `_OnTabItemsChanged` events during a rearrange, so if a tab is closed while we're rearranging tabs, the we don't fire the `SelectionChanged` event that we usually do during a close that would select the new tab.
## Validation Steps Performed
* Tested manually
- Confirmed that tragging a tab out, closing it, then dragging it back in does nothing.
This PR reverts a relatively minor change that was made incorrectly to
ConPTY in #5771.
In that PR, I authored two tests. One of them actually caught the bug
that was supposed to be fixed by #5771. The other test was simply
authored during the investigation. I believed at the time that the test
revealed a bug in conpty that was fixed by _removing_ this block of
code. However, an investigation itno #5839 revealed that this code was
actually fairly critical.
So, I'm also _skipping_ this buggy test for now. I'm also adding a
specific test case to this bug.
The problem in the bugged case of `WrapNewLineAtBottom` is that
`WriteCharsLegacy` is wrapping the bottom row of the ConPTY buffer,
which is causing the cursor to automatically move to the next line in
the buffer. This is because `WriteCharsLegacy` isn't being called with
the `WC_DELAY_EOL_WRAP` flag. So, in that test case,
* The client emits a wrapped line to conpty
* conpty fills the bottom line with that text, then dutifully increments
the buffer to make space for the cursor on a _new_ bottom line.
* Conpty reprints the last `~` of the wrapped line
* Then it gets to the next line, which is being painted _before_ the
client emits the rest of the line of text to fill that row.
* Conpty thinks this row is empty, (it is) and manually breaks the row.
However, the test expects this row to be emitted as wrapped. The problem
comes from the torn state in the middle of these frames - the original
line probably _should_ remain wrapped, but this is a sufficiently rare
case that the fix is being punted into the next release.
It's possible that improving how we handle line wrapping might also fix
this case - currently we're only marking a row as wrapped when we print
the last cell of a row, but we should probably mark it as wrapped
instead when we print the first char of the _following_ row. That work
is being tracked in #5800
### The real bug in this PR
The problem in the `DeleteWrappedWord` test is that the first line is
still being marked as wrapped. So when we get to painting the line below
it, we'll see that there are no characters to be printed (only spaces),
we emit a `^[20X^[20C`, but the cursor is still at the end of the first
line. Because it's there, we don't actually clear the text we want to
clear.
So DeleteWrappedWord, #5839 needs the `_wrappedRow = std::nullopt;`
statement here.
## References
* I guess just look at #5800, I put everything in there.
## Validation Steps Performed
* Tested manually that this was fixed for the Terminal
* ran tests
Closes#5839
A couple of codepoints, namely the card suites, male and female signs,
and white and black smiling faces were changed to have a two-column
width as part of #5795 since they were specified as emoji in Unicode's
emoji list v13.0[1].
These particular glyphs also show up in some of the most fundamental
code pages, such as CP437[2] and WGL4[3]. We should
not be touching the width of the glyphs in these codepages, as suddenly
changing a long-time-running narrow glyph to use two-columns all of a
sudden will surely break (and has already broken) things.
[1] https://www.unicode.org/Public/13.0.0/ucd/emoji/emoji-data.txt
[2] https://en.wikipedia.org/wiki/Code_page_437
[3] https://en.wikipedia.org/wiki/Windows_Glyph_List_4Closes#5822
Terminal should try not to join the choir invisible when the clipboard
API straight up horks it.
This accounts for ~3% of the crashes seen in 1.0RC1 and ~1% of the
crashes seen all-up in the last 14 days.
## Repro (prior to this commit)
Set `"copyOnSelect": true`.
Copy something small.
Hold down <kbd>Ctrl+Shift+V</kbd>
Double-click like your life depends on it. Double-click like you're
playing cookie clicker again. 2013 called, it wants its cookies back.
Fixes#4906.
It turns out that we weren't really adequately guarding calls to
SetSelectionEnd and friends.
We're clearing the active selection when the window resizes, but we're
doing so by nulling out the std::optional<Selection> it lives in. Later,
though, when we set the selection endpoint we're using "_selection->".
Optional's operator-> has undefined behavior when the optional doesn't
have a value in it.
In our case, it looks like it was returning whatever the value was prior
to it being emptied out. PivotSelection would attempt to access an
out-of-bounds coordinate when the buffer got smaller during a resize.
The solution is to guard both levels of selection endpoint manipulation
in a check for an active selection.
Apparently, this accounts for somewhere between 7% and 14% of our
crashes on 1.0RC1.
Repro was:
Use Win+Arrow to snap the window while in the middle of a selection.
## Summary of the Pull Request
Adds user settings to adjust rendering behavior to mitigate blurry text on some devices.
## References
- #778 introduced this, almost certainly.
## PR Checklist
* [x] Closes#5759, mostly
* [x] I work here.
* [ ] We need community verification that this will help.
* [x] Updated schema and schema doc.
* [x] Am core contributor. Discussed in Monday sync meeting and w/ @DHowett-MSFT.
## Detailed Description of the Pull Request / Additional comments
When we switched from full-screen repaints to incremental rendering, it seems like we exposed a situation where some display drivers and hardware combinations do not handle scroll and/or dirty regions (from `IDXGISwapChain::Present1`) without blurring the data from the previous frame. As we're really close to ship, I'm offering two options to let people in this situation escape it on their own. We hope in the future to figure out what's actually going on here and mitigate it further in software, but until then, these escape hatches are available.
1. `experimental.rendering.forceFullRepaint` - This one restores the pre-778 behavior to the Terminal. On every single frame paint, we'll invalidate the entire screen and repaint it.
2. `experimental.rendering.software` - This one uses the software WARP renderer instead of using the hardware and display driver directly. The theory is that this will sidestep any driver bugs or hardware variations.
One, the other, or both of these may be field-applied by users who are experiencing this behavior.
Reverting #778 completely would also resolve this, but it would give back our largest performance win in the whole Terminal project. We don't believe that's acceptable when seemingly a majority of the users are experiencing the performance benefit with no detriment to graphical display.
## Validation Steps Performed
- [x] Flipped them on and verified with the debugger that they are being applied to the rendering pipeline
- [ ] Gave a private copy to community members in #5759 and had them try whether one, the other, or both resolved their issue.
This is an attempt to simplify the SGR (Select Graphic Rendition)
implementation in conhost, to cut down on the number of methods required
in the `ConGetSet` interface, and pave the way for future improvements
and bug fixes. It already fixes one bug that prevented SGR 0 from being
correctly applied when combined with meta attributes.
* This a first step towards fixing the conpty narrowing bugs in issue
#2661
* I'm hoping the simplification of `ConGetSet` will also help with
#3849.
* Some of the `TextAttribute` refactoring in this PR overlaps with
similar work in PR #1978.
## Detailed Description of the Pull Request / Additional comments
The main point of this PR was to simplify the
`AdaptDispatch::SetGraphicsRendition` implementation. So instead of
having it call a half a dozen methods in the `ConGetSet` API, depending
on what kinds of attributes needed to be set, there is now just one call
to get current attributes, and another call to set the new value. All
adjustments to the attributes are made in the `AdaptDispatch` class, in
a simple switch statement.
To help with this refactoring, I also made some change to the
`TextAttribute` class to make it easier to work with. This included
adding a set of methods for setting (and getting) the individual
attribute flags, instead of having the calling code being exposed to the
internal attribute structures and messing with bit manipulation. I've
tried to get rid of any methods that were directly setting legacy, meta,
and extended attributes.
Other than the fix to the `SGR 0` bug, the `AdaptDispatch` refactoring
mostly follows the behaviour of the original code. In particular, it
still maps the `SGR 38/48` indexed colors to RGB instead of retaining
the index, which is what we ultimately need it to do. Fixing that will
first require the color tables to be unified (issue #1223), which I'm
hoping to address in a followup PR.
But for now, mapping the indexed colors to RGB values required adding an
an additional `ConGetSet` API to lookup the color table entries. In the
future that won't be necessary, but the API will still be useful for
other color reporting operations that we may want to support. I've made
this API, and the existing setter, standardise on index values being in
the "Xterm" order, since that'll be essential for unifying the code with
the terminal adapter one day.
I should also point out one minor change to the `SGR 38/48` behavior,
which is that out-of-range RGB colors are now ignored rather than being
clamped, since that matches the way Xterm works.
## Validation Steps Performed
This refactoring has obviously required corresponding changes to the
unit tests, but most were just minor updates to use the new
`TextAttribute` methods without any real change in behavior. However,
the adapter tests did require significant changes to accommodate the new
`ConGetSet` API. The basic structure of the tests remain the same, but
the simpler API has meant fewer values needed to be checked in each test
case. I think they are all still covering the areas there were intended
to, though, and they are all still passing.
Other than getting the unit tests to work, I've also done a bunch of
manual testing of my own. I've made sure the color tests in Vttest all
still work as well as they used to. And I've confirmed that the test
case from issue #5341 is now working correctly.
Closes#5341
The table that we refer to in `CodepointWidthDetector.cpp` to determine
whether or not a codepoint should be rendered as Wide vs Narrow was
based off EastAsianWidth[1]. If a codepoint wasn't included in this
table, they're considered Narrow. Many emojis aren't specified in the
EAW list, so this PR supplements our table with emoji codepoints from
emoji-data[2] in order to render most, if not all, emojis as full-width.
There are certain codepoints I've added to the comments (in case we want
to add them officially to the table in the future) that Microsoft
decided to give an emoji presentation even if it's specified as
Narrow/Ambiguous in the EAW list and are _not_ specified in the Unicode
emoji list. These include all of the Mahjong Tiles block, different
direction pencils (✎✐), different pointing index fingers (☜, ☞) among
others. I have no idea if I've captured all of them, as I don't know of
an easy way to detect which are Microsoft specific emojis.
## Validation Steps Performed
I have looked at so many emojis that I dream emoji.
These screenshots aren't encompassing _all_ emoji but I've tried to grab
a couple from all across the codepoint ranges:
Before:
After:
[1] http://www.unicode.org/Public/UCD/latest/ucd/EastAsianWidth.txt
[2] https://www.unicode.org/Public/13.0.0/ucd/emoji/emoji-data.txtCloses#900
## Summary of the Pull Request
We accidentally missed switching one `TriggerRedrawAll` to `TriggerScroll`. This does that.
## References
#5185 - applies logic from this PR
## PR Checklist
* [X] Closes#5756
## Validation Steps Performed
Followed bug repro steps.
## Summary of the Pull Request
This PR resolves an issue with the Git for Windows (MSYS) version of `less`. It _doesn't_ use VT processing for emitting text tothe buffer, so when it hits `WriteCharsLegacy`, `WC_DELAY_EOL_WRAP` is NOT set.
When this happens, `less` is writing some text that's longer than the width of the buffer to the last line of the buffer. We're hitting the
```c++
Status = AdjustCursorPosition(screenInfo, CursorPosition, WI_IsFlagSet(dwFlags, WC_KEEP_CURSOR_VISIBLE), psScrollY);
```
call in `_stream.cpp:560`.
The cursor is _currently_ at `{40, 29}`, the _start_ of the run of text that wrapped. We're trying to adjust it to `{0, 30}`, which would be the start of the next line of the buffer. However, the buffer is only 30 lines tall, so we've got to `IncrementCircularBuffer` first, so we can move the cursor there.
When that happens, we're going to paint frame. At the end of that frame, we're going to try and paint the cursor position. The cursor is still at `{40, 29}` here, so unfortunately, the `cursorIsInDeferredWrap` check in `XtermEngine::PaintCursor` is `false`. That means, conpty is going to try to move the cursor to where the console thinks the cursor actually is at the end of this frame, which is `{40, 29}`.
If we're painting the frame because we circled the buffer, then the cursor might still be in the position it was before the text was written to the buffer to cause the buffer to circle. In that case, then we DON'T want to paint the cursor here either, because it'll cause us to manually break this line. That's okay though, the frame will be painted again, after the circling is complete.
## PR Checklist
* [x] Closes#5691
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I suppose that's the detailed description above
## Validation Steps Performed
* ran tests
* checked that the bug was actually fixed in the Terminal
This allows me to make the build pipeline, instead of the release
engineer, put the version number in the package name.
It also lets us sign multiple packages (if we ever produce more than
one.)
## Summary of the Pull Request
Identifies and scales glyphs in the box and line drawing ranges U+2500-U+259F to fit their cells.
## PR Checklist
* [x] Closes#455
* [x] I work here.
* [x] Manual tests. This is all graphical.
* [x] Metric ton of comments
* [x] Math spreadsheet included in PR.
* [x] Double check RTL glyphs.
* [x] Why is there the extra pixel?
* [x] Scrolling the mouse wheel check is done.
* [x] Not drawing outline?
* [x] Am core contributor. Roar.
* [x] Try suppressing negative scale factors and see if that gets rid of weird shading.
## Detailed Description of the Pull Request / Additional comments
### Background
- We want the Terminal to be fast at drawing. To be fast at drawing, we perform differential drawing, or only drawing what is different from the previous frame. We use DXGI's `Present1` method to help us with this as it helps us compose only the deltas onto the previous frame at drawing time and assists us in scrolling regions from the previous frame without intervention. However, it only works on strictly integer pixel row heights.
- Most of the hit testing and size-calculation logic in both the `conhost` and the Terminal products are based on the size of an individual cell. Historically, a cell was always dictated in a `COORD` structure, or two `SHORT` values... which are integers. As such, when we specify the space for any individual glyph to be displayed inside our terminal drawing region, we want it to fall perfectly inside of an integer box to ensure all these other algorithms work correctly and continue to do so.
- Finally, we want the Terminal to have font fallback and locate glyphs that aren't in the primary selected font from any other font it can find on the system that contains the glyph, per DirectWrite's font fallback mechanisms. These glyphs won't necessarily have the same font or glyph metrics as the base font, but we need them to fit inside the same cell dimensions as if they did because the hit testing and other algorithms aren't aware of which particular font is sourcing each glyph, just the dimensions of the bounding box per cell.
### How does Terminal deal with this?
- When we select a font, we perform some calculations using the design metrics of the font and glyphs to determine how we could fit them inside a cell with integer dimensions. Our process here is that we take the requested font size (which is generally a proxy for height), find the matching glyph width for that height then round it to an integer. We back convert from that now integer width to a height value which is almost certainly now a floating point number. But because we need an integer box value, we add line padding above and below the glyphs to ensure that the height is an integer as well as the width. Finally, we don't add the padding strictly equally. We attempt to align the English baseline of the glyph box directly onto an integer pixel multiple so most characters sit crisply on a line when displayed.
- Note that fonts and their glyphs have a prescribed baseline, line gap, and advance values. We use those as guidelines to get us started, but then to meet our requirements, we pad out from those. This results in fonts that should be properly authored showing gaps. It also results in fonts that are improperly authored looking even worse than they normally would.
### Now how does block and line drawing come in?
- Block and Line drawing glyphs are generally authored so they will look fine when the font and glyph metrics are followed exactly as prescribed by the font. (For some fonts, this still isn't true and we want them to look fine anyway.)
- When we add additional padding or rounding to make glyphs fit inside of a cell, we can be adding more space than was prescribed around these glyphs. This can cause a gap to be visible.
- Additionally, when we move things like baselines to land on a perfect integer pixel, we may be drawing a glyph lower in the bounding box than was prescribed originally.
### And how do we solve it?
- We identify all glyphs in the line and block drawing ranges.
- We find the bounding boxes of both the cell and the glyph.
- We compare the height of the glyph to the height of the cell to see if we need to scale. We prescribe a scale transform if the glyph wouldn't be tall enough to fit the box. (We leave it alone otherwise as some glyphs intentionally overscan the box and scaling them can cause banding effects.)
- We inspect the overhang/underhang above and below the boxes and translate transform them (slide them) so they cover the entire cell area.
- We repeat the previous two steps but in the horizontal direction.
## Validation Steps Performed
- See these commments:
- https://github.com/microsoft/terminal/issues/455#issuecomment-620248375
- https://github.com/microsoft/terminal/issues/455#issuecomment-621533916
- https://github.com/microsoft/terminal/issues/455#issuecomment-622585453
Also see the below one with more screenshots:
- https://github.com/microsoft/terminal/pull/5743#issuecomment-624940567
If we're fullscreen, the TabView isn't `Visible`. If it's not `Visible`,
it's _not_ going to raise a `SelectionChanged` event, which is what we
usually use to focus another tab. Instead, we'll have to do it manually
here.
So, what we're going to try to do is move the focus to the tab to the
left, within the bounds of how many tabs we have.
EX: we have 4 tabs: [A, B, C, D]. If we close:
* A (`tabIndex=0`): We'll want to focus tab B (now in index 0)
* B (`tabIndex=1`): We'll want to focus tab A (now in index 0)
* C (`tabIndex=2`): We'll want to focus tab B (now in index 1)
* D (`tabIndex=3`): We'll want to focus tab C (now in index 2)
`_UpdatedSelectedTab` will do the work of setting up the new tab as the
focused one, and unfocusing all the others.
Also, we need to _manually_ set the SelectedItem of the tabView here. If
we don't, then the TabView will technically not have a selected item at
all, which can make things like ClosePane not work correctly.
## PR Checklist
* [x] Closes#5799
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Played with it a bunch
## Summary of the Pull Request
This adds a new appxmanifest for 'Windows Terminal (Preview)' and links the resources.
Code-wise, split up `WindowsTerminalReleaseBuild` into...
- WindowsTerminalOfficialBuild: [true, false]
- WindowsTerminalBranding: [Dev, Preview, Release]
Added a comment about that in release.yml
## Validation Steps Performed
used msbuild to build...
- [X] Dev
- [X] Preview
- [X] Release
then checked the msix for the correct name/icon.
[Git2Git] Merged PR 4644345: conhost: disable the DX renderer in inbox builds
We're going to be taking on some changes to the Dx renderer that are at
the very least annoying and at the very most inconsequential to the
inbox console. This commit removes support for the DX renderer from the
inbox console.
SizeBench reports that ConRenderDx contributes 55.1kb to the conhost
image (as its third largest constituent library), so this should net us
a couple pleasant WPG improvements down the line.
Related work items: #26291552 Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 6e36786d447b7975298ba31ccd77c5c649fbfbe6
Related work items: #26291552
[Git2Git] Git Train: Merge of building/rs_onecore_dep_uxp/200504-1008 into official/rs_onecore_dep_uxp Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp bbdf04608ba96c3f8ee06cf100428cde01f3df79
Related work items: #26071826
This is actually related to another issue we have, #3917. I think if the system is set to "Dark" theme, but the app is set to light theme, then the brush lookup in `_ClearNewTabButtonColor` still returns to us the dark theme brushes.
Fortunately, since we're not actually setting the color of the new tab button anymore, we can just remove the call to that method now, and loop back on it later.
## References
* regressed in #3789
* related to #3917
## PR Checklist
* [x] Closes#5741
The Erase All VT sequence (`^[[2J`) is supposed to erase the entire
contents of the viewport. The way it usually does this is by shifting
the entirety of the viewport contents into scrollback, and starting the
new viewport below it.
Currently, conpty doesn't propagate that state change correctly. When
conpty gets a 2J, it simply erases the content of the connected
terminal's viewport, by writing over it with spaces. Conpty didn't
really have a good way of communicating "your viewport should move", it
only knew "the buffer is now full of spaces".
This would lead to bugs like #2832, where pressing <kbd>ctrl+L</kbd> in
`bash` would delete the current contents of the viewport, instead of
moving the viewport down.
This PR makes sure that when conpty sees a 2J, it passes that through
directly to the connected terminal application as well. Fortunately, 2J
was already implemented in the Windows Terminal, so this actually fixes
the behavior of <kbd>ctrl+L</kbd>/`clear` in WSL in the Terminal.
## References
* #4252 - right now this isn't the _most_ optimal scenario, we're
literally just printing a 2J, then we'll perform "erase line" `height`
times. The erase line operations are all redundant at this point - the
entire viewport is blank, but conpty doesn't really know that.
Fortunately, #4252 was already filed for me to come through and
optimize this path.
## PR Checklist
* [x] Closes#2832
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
* compared <kbd>ctrl+L</kbd> with its behavior in conhost
* compared `clear` with its behavior in conhost
I never got to fixing these in the original #3789 PR, but I messed up that branch way too many times already that I figured I'd just do it in post.
* [x] Fixes the typo bot in `master`
* [x] I work here
This commit introduces a context menu for Tab and a new item,
"Color...", which will display a color picker.
A flyout menu, containing a custom flyout, is attached to each tab. The
flyout displays a palette of 16 preset colors and includes a color
picker. When the user selects or clears color, an event is fired, which
is intercepted by the tab to which the flyout belongs.
The changing of the color is achieved by putting the selected color in
the resource dictionary of the tab, using well-defined dictionary keys
(e.g. TabViewItemHeaderBackground). Afterwards the visual state of the
tab is toggled, so that the color change is visible immediately.
Custom-colored tabs will be desaturated (somewhat) by alpha blending
them with the tab bar background.
The flyout menu also contains a 'Close' flyout item.
## Validation Steps Performed
I've validated the behavior manually: start the program via the start
menu. Right click on the tab -> Choose a tab color.
The color flyout is going to be shown. Click a color swatch or click
'Select a custom color' to use the color picker. Use the 'Clear the
current color' to remove the custom color.
Closes#2994. References #3327.
Add a note that the user needs to hide dynamic profiles, not just delete them.
* [x] I work here
* [x] Is documentation.
* related to discussion in #3231
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This fixes the RTL regression caused in #4747. We create the rectangle taking the direction (through the BiDi Level) into account, and then the rendering works again. The GlyphRun shaping could still probably use some work to be a polished thingy, and there are still issues with RTL getting chopped up a lot when there's font fallback going on, but this fixes the regression, and it's now functional again.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4779#4747
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4779
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The baseline is actually direction dependent. So when it was being initialized, the unconditional baseline as left broke it, setting the box off to right of the text. We just check if the `GlyphRun->bidiLevel` is set, and if so, we adjust it so that the baseline lines up with the right, not with the left.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Tooltip texts is an important element of each software! Added tooltip text to close button, minimize, restore down, and new tab. Moved from original.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Connected to #5355
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] Closes#5355
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [X] No Docs
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #5355
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
I'm pretty sure most ppl know what a tooltip text is, but for those who don't, it's a text that tells you what a button does when you over the button with your mouse.
This commit introduces a NOTICE.html file that will be embedded into the
package. It will be stamped down with the real notices during a branded
release build (as part of the build pipeline.)
It, in part, reverts some of the really good work in determining the
commit hash at build time. That work will be preserved in history.
This is more compliant with our duties to the OSS we consume.
## Summary of the Pull Request
This PR implements a pair of shims for `cmd` and `powershell`, so that their `cls` and `Clear-Host` functions will clear the entire terminal buffer (like they do in conhost), instead of just the viewport. With the conpty viewport and buffer being the same size, there's effectively no way to know if an application is calling these API's in this way with the intention of clearing the buffer or the viewport. We absolutely have to guess.
Each of these shims checks to see if the way that the API is being called exactly matches the way `cmd` or `powershell` would call these APIs. If it does, we manually write a `^[[3J` to the connected terminal, to get he Terminal to clear it's own scrollback.
~~_⚠️ If another application were trying to clear the **viewport** with an exactly similar API call, this would also cause the terminal scrollback to get cleared ⚠️_~~
* [x] Should these shims be restricted to when the process that's calling them is actually `cmd.exe` or `powershell.exe`? Can I even do this? I think we've done such a good job of isolating the client process information from the rest of the host code that I can't figure out how to do this.
- YES, this can be done, and I did it.
* [ ] **TODO**: _While I'm here_, should I have `DoSrvPrivateEraseAll` (the implementation for `^[[2J`, in `getset.cpp`) also manually trigger a EraseAll in the terminal in conpty mode?
## PR Checklist
* [x] Closes#3126
* [x] Actually closes#1305 too, which is really the same thing, but probably deserves a callout
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
* checked `cls` in the Terminal
* checked `Clear-Host` in the Terminal
* Checked running `powershell clear-host` from `cmd.exe`
We've got a weird crash that happens terribly inconsistently, but pretty
readily on migrie's laptop, only in Debug mode. Apparently, there's some
weird ref-counting magic that goes on during teardown, and our
Application doesn't get closed quite right, which can cause us to crash
into the debugger. This of course, only happens on exit, and happens
somewhere in the `...XamlHost.dll` code.
Crazily, if we _manually leak the `Application`_ here, then the crash
doesn't happen. This doesn't matter, because we really want the
Application to live for _the entire lifetime of the process_, so the only
time when this object would actually need to get cleaned up is _during
exit_. So we can safely leak this `Application` object, and have it just
get cleaned up normally when our process exits.
* [x] I discussed this with @DHowett-MSFT and we both agree this is mental
* [x] I'm pretty sure there's not an actual bug on our repo for this
* [x] I verified on my machine where I can crash the terminal 100% of the time on exit in debug, this fixes it
* [x] I verified that it doesn't introduce a _new_ crash in Release on my machine
Turns out we're still being a bit too aggressive when removing spaces.
If there are spaces at the end of the first run painted to a bottom
line, _and the bottom line was a different color than the previous_,
then we can't trim those spaces off the string. We still need to emit
those to make sure the terminal has colored spaces in it as well.
## References
* there's like 80 PRs in the last month for this function
## PR Checklist
* [x] Closes#5502
* [x] I work here
* [x] Tests added/passed
## Validation Steps
* [x] ran the tests
* [x] checked that vtpipeterm still worked
* [x] Checked that the bug was fixed in the Terminal
For our release builds, we're just going to integrate the UWPDesktop CRT
into our package and delete the package dependencies. It's very
difficult for users who do not have access to the store to get our
dependency packages, and we want to be robust and deployable everywhere.
Since these libraries can be redistributed, it's easiest if we simply
redistribute them.
Our package grows by ~550kb per architecture (compressed) because of
this. I've added validation that we don't have both the libs _and_ the
dependencies in the same package.
Fixes#3097.
## Validation
The script does it!
## Summary of the Pull Request
Based on the discussion in #5479, it seems that the crash is caused by a race condition due to not obtaining the write lock before calling `TriggerFontChange`.
I'm not totally sure if my approach is the right one, but I've taken the lock out of `_RefreshSize` since it seems like all calls of `_RefreshSize` come after a `TriggerFontChange`/`UpdateFont`. Then I just
made sure all calls of `TriggerFontChange`/`UpdateFont` are preceded with a `LockForWriting`.
## PR Checklist
* [x] Closes#5479
* [x] CLA signed.
* [x] Tests added/passed
## Validation Steps Performed
Scrolling to change my font size does not kill the Terminal anymore! 🙌
If a class has a constructor which can be called with a single argument,
then this constructor becomes conversion constructor because such a
constructor allows conversion of the single argument to the class being
constructed. To ensure these constructors are passed the argument of its
type, I labeled them explicit.
In some header files, there were constructors that took a value that
could involve implicit conversions, so I added explicit to ensure that
does not happen.
Hide any commandline (cooked read) we have before we begin a resize, and
show it again after the resize.
## References
* I found #5618 while I was working on this.
## PR Checklist
* [x] Closes#1856
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Basically, during a resize, we try to restore the viewport position
correctly, and part of that checks where the current commandline ends.
However, when we do that, the commandline's _current_ state still
reflects the _old_ buffer size, so resizing to be smaller can cause us
to throw an exception, when we find that the commandline doesn't fit in
the new viewport cleanly.
By hiding it, then redrawing it, we avoid this problem entirely. We
don't need to perform the check on the old commandline contents (since
they'll be empty), and we'll redraw it just fine for the new buffer size
## Validation Steps Performed
* ran tests
* checked resizing, snapping in conhost with a cooked read
* checked resizing, snapping in the Terminal with a cooked read
Web apps apparently will paste the <title> as plaintext before the
actual HTML content from the clipboard. Since this seems to be
widespread behavior across web apps, this isn't just a bug in _some
app_, this is a bug on us. We shouldn't emit the title.
This PR removes the title tag from the generated HTML.
Closes#5347
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
In tonight's episode of "Can we be even faster?", we will... you know what, just take a look at the code.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
It is actually a quite common technique seen inside the codebase to first reserve the spaces before pushing something into vectors. I don't know why it is not used here.
Before:
After:
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
In tonight's episode of "I wanna my CPU back", we'll see a quite familiar face whose name is Mr.AttrRow.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#2937
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
I knew this is possible a long time ago. Just didn't got the chance to actually implement this. I understand that you guys are busy preparing the v1.0 release. So if this is a bad time, this can wait.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manually tested. If all goes well, nothing will be broken.
## Summary of the Pull Request
This PR clamp the "new rows" scrolling value to a positive number. We can't create a negative number of new rows. It also adds a test.
## References
## PR Checklist
* [x] Closes#5540
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
The origin of this bug is that as newlines are emitted, we'll accumulate an enormous scroll delta into a selection region, to the point of overflowing a `SHORT`. When the overflow occurs, the `Terminal` would fail to send a `NotifyScroll()` to the `TermControl` hosting it.
For this bug to repro, we need to:
- Have a sufficiently large buffer, because each newline we'll accumulate a delta of (0, ~bufferHeight), so (bufferHeight^2 + bufferHeight) > SHRT_MAX
- Have a selection
## Validation Steps Performed
* Dustin verified this actually
* Created a new insane test case
## Summary of the Pull Request
Before this, if the Search Box was open, new selections would not notify automation clients. This was because the UiaEngine (responsible for notifying automation clients) would remain disabled. Now we're enabling it before the early exit in TermControl's FocusHandler
## PR Checklist
* [X] Will close issue #5421 upon verification
## Validation Steps Performed
Verified using NVDA.
Narrator's behavior is not impacted, for some reason.
This PR fixes#5525 by re-adding range checks that were erroneously removed in
a9c9714.
## Validation Steps Performed
* Enabled a German keyboard layout
* Entered `<`, `+`, `7`, `8`, `9`, `0` while holding either Alt+Ctrl or AltGr and...
* Ensuring that both produce `|`, `~`, `{`, `[`, `]`, `}`
Closes#5525
## Summary of the Pull Request
This PR will add a link to the version of `NOTICE.md` in GitHub at the commit that the build was on. It uses the same approach for generating our settings files, where we'll create a header file with the commit hash assigned to a `wstring_view` during build time.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#5139
* [x] CLA signed.
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
The link is there and goes to the expected `NOTICE.md`.
## Summary of the Pull Request
This PR performs a number of miscellaneous clean-up tasks on our schema:
- [X] allow null for some settings
- [X] update some default values to be more useful
- [X] consistently use " instead of '
- [X] remove colorTable
- [X] provide missing description for `backgroundImageOpacity`
- [X] update cursorShape to have options match order displayed in vs code
- [X] if a setting has multiple options, provide a list of those options with a short description on each
- this one I only did a few times
- [X] remove a little bit of ambiguity on some descriptions
## PR Checklist
Closes#5279
## Detailed Description of the Pull Request / Additional comments
Validation was performed for...
- [X] Global Settings
- [X] Profile Settings
- [x] Keybinding Actions
## Validation Steps Performed
I linked VS Code to the my version of the schema. Defined all settings from scratch in settings.json. Anytime I found something off, I updated the schema and saw if it looks right.
This PR fixes a couple of issues with TSFInputControl alignment:
1. The emoji picker IME in particular would show up overlapping the
current buffer row because I stupidly didn't realize that
`TextBlock.ActualHeight` is 0 right after initialization and before
it has any text. So, the emoji picker will show up on the bottom of
the 0 height TextBlock, which overlaps the current buffer row. This
isn't a problem with CJK because inputting text _causes_ the IME to
show up, so by the time the IME shows up, the TextBlock has text and
accordingly has a height.
2. It turns out the emoji picker IME doesn't follow the `TextBlock`
bottom, unlike Chinese and Japanese IME, so if a user were to compose
near the edge of the screen and let the `TextBlock` start line
wrapping, the emoji IME doesn't follow the bottom of the `TextBlock`
as it grows. This means that the `TextBlock` position doesn't update
in the middle of composition, and the `LayoutRequested` event that it
fires at the beginning of composition is the only chance we get to
tell the emoji IME where to place itself. It turns out when we reset
`TextBlock.Text`, the ActualHeight doesn't get immediately reset back
to the min size. So if a user were to bring up the emoji IME before
`ActualHeight` is reset, the IME will show up way below the current
buffer row.
3. We don't currently `TryRedrawCanvas` when the window position changes
(resizing, dragging the window around), so sometimes dragging or
resizing the Terminal doesn't update the position of the IME. Ideally
it should be listening to some "window position changed" event, but
alas we don't have that and it would be much harder than this
incoming fix. We'll just track the window bounds as part of
`TryRedrawCanvas` and redraw if it changes. For the most part, this
will allow the IME to update to where the new window position is, but
it'll only be called if we receive a `LayoutRequested` event.
## PR Checklist
* [x] Closes#5470
* [x] CLA signed.
* [x] Tests added/passed
## Validation Steps Performed
I play with it for quite a bit.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
A tiny performance fix in `renderer.cpp`.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The cluster construction code is intensively called during rendering. Even though a single `back()` is fast, but accumulated `back()`s still take a noticiable amount of CPU cycles.
Before:
After:
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manually validated.
This property was deprecated in 0.11. We probably should have also added a warning
message to help the community figure out that this property is gone and won't work
anymore.
This PR adds that warning.
* I'm not going to list the enormous number of duped threads _wait yes I am_
* #5581
* #5547
* #5555
* #5557
* #5573
* #5532
* #5527
* #5535
* #5510
* #5511
* #5512
* #5513
* #5516
* #5515
* #5521
* This literally isn't even all of them
* [x] Also mainly related to #5458
* [x] I work here
* [x] Tests added/passed
Followup to ea61aa3b.
The default foreground in the iTerm2 defaults for the Tango Dark color
scheme is too bright, use the value for ANSI 7 (white) instead.
References #5305
Sorry, I should have really done this in the original PR.
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Simple fix to update the example documentation with the recent changes to 0.11.
Also known as "Kill HRGN II: Kills Regions Dead (#5485)"
Copying the description from @greg904 in #4778.
--- 8< ---
My understanding is that the XAML framework uses another way of getting
mouse input that doesn't work with `WM_SYSCOMMAND` with `SC_MOVE`. It
looks like it "steals" our mouse messages like `WM_LBUTTONDOWN`.
Before, we were cutting (with `HRGN`s) the drag bar part of the XAML
islands window in order to catch mouse messages and be able to implement
the drag bar that can move the window. However this "cut" doesn't only
apply to input (mouse messages) but also to the graphics so we had to
paint behind with the same color as the drag bar using GDI to hide the
fact that we were cutting the window.
The main issue with this is that we have to replicate exactly the
rendering on the XAML drag bar using GDI and this is bad because:
1. it's hard to keep track of the right color: if a dialog is open, it
will cover the whole window including the drag bar with a transparent
white layer and it's hard to keep track of those things.
2. we can't do acrylic with GDI
So I found another method, which is to instead put a "drag window"
exactly where the drag bar is, but on top of the XAML islands window (in
Z order). I've found that this lets us receive the `WM_LBUTTONDOWN`
messages.
--- >8 ---
Dustin's notes: I've based this on the implementation of the input sink
window in the UWP application frame host.
Tested manually in all configurations (debug, release) with snap,
drag, move, double-click and double-click on the resize handle. Tested
at 200% scale.
Closes#4744Closes#2100Closes#4778 (superseded.)
Takes the lock inside two routines in `TermControl` that were changing
the selection endpoint while a rendering frame was still drawing,
resulting in several variants of graphical glitches from double-struck
selection boxes to duplicated line text.
## References
- Introduced with #5185
## PR Checklist
* [x] Closes#5471
* [x] Already signed life away to company.
* [x] Manual tests passed since it's visual.
* [x] No extra doc besides the comments.
* [x] Am core contributor: Roar.
The renderer base and specific renderer engine do a lot of work to
remember the previous selection and compensate for scrolling regions and
deltas between frames. However, all that work doesn't quite match up
when the endpoints are changed out from under it. Unfortunately,
`TermControl` doesn't have a robust history of locking correctly in step
with the renderer nor does the renderer's `IRenderData` currently
provide any way of 'snapping' state at the beginning of a frame so it
could work without a full lock. So the solution for now is for the
methods that scroll the display in `TermControl` to take the lock that
is shared with the renderer's frame painter so they can't change out of
sync.
## Validation Steps Performed
- Opened terminal with Powershell core.
Did ls a bunch of times.
Clicked to make selection and held mouse button while wheeling around.
- Opened terminal with Powershell core.;
Did ls a bunch of times.
Clicked to make selection and dragged mouse outside the window to make
auto scroll happen.
- Opened terminal with Powershell core.
Did ls a bunch of times.
Clicked to make selection and released. Wheeled around like a crazy
person to make sure I didn't regress that.
Literally just <kbd>ctrl+f</kbd> find-and-replace all the old `profiles.json` that are sitting around in the repo with `settings.json`. I didn't touch the specs, since it seemed better to leave them in the state that they were originally authored in.
* [x] closes#5522
* [x] I work here.
* [x] This is docs.
These were already in the `SettingsSchema.md`, so I just updated the `profiles.schema.json` to have the descriptions as well.
* [x] closes#5520
* [x] I work here.
* [x] This is docs.
It was brought to our attention that shipping a font with ligatures as our default
font could be an accessibility issue for the visually-impaired. Unfortunately, we
don't have a renderer setting to disable ligatures (#759). Fortunately however, we
DO already have a version of Cascadia that doesn't have ligatures.
If we ship that and set it as our default font, we'll at least let people _opt_ to
have ligatures enabled by switching from `Cascadia Mono` to `Cascadia Code`.
## PR Checklist
* [x] Closes internal discussion
* [x] CLA signed
* [ ] Tests added/passed
* [x] Requires documentation to be updated
* [x] I've discussed this with core contributors already.
In order to support a transparent background for the acrylic effect, the
renderer sets the alpha value to zero for the default background color.
However, when the _reversed video_ attribute is set, the background is
actually filled with the foreground color, and will not be displayed
correctly if it is made transparent. This PR addresses that issue by
making sure the rendered background color is opaque if the reversed
video attribute is set.
## References
* This is not a major issue at the moment, since the _reverse video_
attribute is not typically forwarded though conpty, but that will
change once #2661 is fixed.
## PR Checklist
* [x] Closes#5498
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not
checked, I'm ready to accept this work might be rejected in favor of a
different grand plan. Issue number where discussion took place: #5498
## Detailed Description of the Pull Request / Additional comments
This simply adds an additional check in `Terminal::GetBackgroundColor`
to make sure the returned color is opaque if the _reverse video_
attribute is set. At some point in the future this check may need to be
extended to support the `DECSCNM` reverse screen mode, but for now
that's not an issue.
## Validation Steps Performed
I've run the test case from issue #5498, and confirmed that it now works
as expected. I've also got an experimental fix for #2661 that I've
tested with this patch, and that now displays _reverse video_ attributes
correctly too.
Closes#5498
If Terminal is spawned by a shortcut that requests that it run in a new process group
while attached to a console session, that request is nonsense. That request will, however,
cause WT to start with Ctrl-C disabled. This wouldn't matter, because it's a Windows-subsystem
application. Unfortunately, that state is heritable. In short, if you start WT using cmd in
a weird way, ^C stops working inside the terminal. Mad.
Fixes#5460.
## Summary of the Pull Request
- Adjusts scaling practices in `DxEngine` (and related scaling practices in `TerminalControl`) for pixel-perfect row baselines and spacing at High DPI such that differential row-by-row rendering can be applied at High DPI.
## References
- #5185
## PR Checklist
* [x] Closes#5320, closes#3515, closes#1064
* [x] I work here.
* [x] Manually tested.
* [x] No doc.
* [x] Am core contributor. Also discussed with some of them already via Teams.
## Detailed Description of the Pull Request / Additional comments
**WAS:**
- We were using implicit DPI scaling on the `ID2D1RenderTarget` and running all of our processing in DIPs (Device-Independent Pixels). That's all well and good for getting things bootstrapped quickly, but it leaves the actual scaling of the draw commands up to the discretion of the rendering target.
- When we don't get to explicitly choose exactly how many pixels tall/wide and our X/Y placement perfectly, the nature of floating point multiplication and division required to do the presentation can cause us to drift off slightly out of our control depending on what the final display resolution actually is.
- Differential drawing cannot work unless we can know the exact integer pixels that need to be copied/moved/preserved/replaced between frames to give to the `IDXGISwapChain1::Present1` method. If things spill into fractional pixels or the sizes of rows/columns vary as they are rounded up and down implicitly, then we cannot do the differential rendering.
**NOW:**
- When deciding on a font, the `DxEngine` will take the scale factor into account and adjust the proposed height of the requested font. Then the remainder of the existing code that adjusts the baseline and integer-ifies each character cell will run naturally from there. That code already works correctly to align the height at normal DPI and scale out the font heights and advances to take an exact integer of pixels.
- `TermControl` has to use the scale now, in some places, and stop scaling in other places. This has to do with how the target's nature used to be implicit and is now explicit. For instance, determining where the cursor click hits must be scaled now. And determining the pixel size of the display canvas must no longer be scaled.
- `DxEngine` will no longer attempt to scale the invalid regions per my attempts in #5185 because the cell size is scaled. So it should work the same as at 96 DPI.
- The block is removed from the `DxEngine` that was causing a full invalidate on every frame at High DPI.
- A TODO was removed from `TermControl` that was invalidating everything when the DPI changed because the underlying renderer will already do that.
## Validation Steps Performed
* [x] Check at 150% DPI. Print text, scroll text down and up, do selection.
* [x] Check at 100% DPI. Print text, scroll text down and up, do selection.
* [x] Span two different DPI monitors and drag between them.
* [x] Giant pile of tests in https://github.com/microsoft/terminal/pull/5345#issuecomment-614127648
Co-authored-by: Dustin Howett <duhowett@microsoft.com>
Co-authored-by: Mike Griese <migrie@microsoft.com>
## Summary of the Pull Request
Users were not able to intercept Ctrl-C input using `$Host.UI.RawUI.ReadKey("IncludeKeyUp")`, because we weren't sending a Ctrl-C KeyUp event. This PR simply adds a KeyUp event alongside the existing KeyDown.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#1894
* [x] CLA signed.
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
The repro script in #1894 now works, both options for `ReadKey`: `IncludeKeyUp` and `IncludeKeyDown` work fine.
This PR adds a test for #5428. Mysteriously, after #5398 merged, 5428 went away. However, I already wrote this test for it, so we might as well add it to our collection.
* [x] Closes#5428
* [x] I work here
* [x] Is a test
- build: move oss required to build conhost out of dep/
This change is necessary as the dep/ folder is not synced into the
Windows source tree.
I've also added a build rule producing a lib for {fmt}.
This will be required for our next OS ingestion.
Related work items: #26069643
This change is necessary as the dep/ folder is not synced into the
Windows source tree.
I've also added a build rule producing a lib for {fmt}.
This will be required for our next OS ingestion.
* Cleaning up the whitelist a bit.
* The magic to exclude repeated characters worked 👍
* Every successful run on master now logs its suggested cleanup, e.g. for 5740e197c2 has https://github.com/microsoft/terminal/runs/596271627#step:4:37
* ⚠️ This check-spelling 0.0.15a+ tolerates Windows line endings in the `whitelist.txt` file (another project I touched had some `.gitconfig` magic which required supporting them).
This means that if someone edits the file w/ something that likes Windows line endings, the file will successfully convert (instead of it being ignored and check-spelling complaining about everything). Most likely anyone else who then edits the file will use something that will maintain the line endings.
Improve wide glyph support in UIA (GH-4946)
Add enhanced key support for ConPty (GH-5021)
Set DxRenderer non-text alias mode (GH-5149)
Reduce CursorChanged Events for Accessibility (GH-5196)
Add more object ID tracing for Accessibility (GH-5215)
Add SS3 cursor key encoding to ConPty (GH-5383)
UIA: Prevent crash from invalid UTR endpoint comparison (GH-5399)
Make CodepointWidthDetector::GetWidth faster (CC-3727)
add til::math, use it for float conversions to point, size (GH-5150)
Add support for renderer backoff, don't FAIL_FAST on 3x failures, add UI (GH-5353)
Fix a deadlock and a bounding rects issue in UIA (GH-5385)
Don't duplicate spaces from potentially-wrapped EOL-deferred lines (GH-5398)
Reimplement the VT tab stop functionality (CC-5173)
Clamp parameter values to a maximum of 32767. (CC-5200)
Prevent the cursor type being reset when changing the visibility (CC-5251)
Make RIS switch back to the main buffer (CC-5248)
Add support for the DSR-OS operating status report (CC-5300)
Update the virtual bottom location if the cursor moves below it (CC-5317)
ci: run spell check in CI, fix remaining issues (CC-4799) (CC-5352)
Set Cascadia Code as default font (GH-5121)
Show a double width cursor for double width characters (GH-5319)
Delegate all character input to the character event handler (CC-4192)
Update til::bitmap to use dynamic_bitset<> + libpopcnt (GH-5092)
Merged PR 4465022: [Git2Git] Merged PR 4464559: Console: Ingest OSS changes up to e0550798
Correct scrolling invalidation region for tmux in pty w/ bitmap (GH-5122)
Render row-by-row instead of invalidating entire screen (GH-5185)
Make conechokey use ReadConsoleInputW by default (GH-5148)
Manually pass mouse wheel messages to TermControls (GH-5131)
This fixes C-M-space for WSL but not for Win32, but I'm not sure there's a problem in Win32 quite yet. (GH-5208)
Fix copying wrapped lines by implementing better scrolling (GH-5181)
Emit lines wrapped due to spaces at the end correctly (GH-5294)
Remove unneeded whitespace (CC-5162)
[Git2Git] Git Train: Merge of building/rs_onecore_dep_uxp/200414-1630 into official/rs_onecore_dep_uxp Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 90031afa8114b7d95e3993573fc8449a1524a7fd
Related work items: #25439646
The "Campbell Powershell" color scheme does not have a high enough color contrast
ratio. Campbell does, so we're changing it there.
Closes (only upon validation) #5393.
## Summary of the Pull Request
This is a quick-and-easy solution to #5309. If the ITextRangeProvider API allows us to take in two UiaTextRanges, we need to verify that they are both valid.
With this PR, we make sure they both fit in the current TextBuffer. If not, we return `E_FAIL`. Though this doesn't prove that both UiaTextRanges are from the same TextBuffer, at the very least we don't crash and in cases where we can't make a valid comparison, we return an HRESULT failure.
## References
#5406 - This should be the proper solution to this problem. Each UiaTextRange needs to be aware of which TextBuffer it came from.
## PR Checklist
* [X] Closes#5309
## Validation Steps Performed
1. generate enough output to cause the terminal to scroll
2. execute `nano` to make us go into the alternate buffer
This previously crashed, now NVDA seems to detect that there was an error and keeps moving along.
The logic here, regarding deleting the spaces and just instantly adding
them bad, is incredibly suspect. Given that we're close to 0.11, I don't
think I can change it.
I've added a TODO with an issue number to figure out the right logic
here.
Fixes#5386.
## PR Checklist
* [x] Closes#5386
* [x] CLA signed
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I'm horrified.
## Validation Steps Performed
Tests, manual validation of the scenario in 5386 and a repro program.
This commit adds a specific error message to the build that tells people
to restore git submodules if they forgot to read the README.
#5416 was the straw that broke the camel's back.
Selection would act up when you were using shift to ignore VT mouse
mode: we would get hundreds of WM_KEYDOWN for VK_SHIFT and dismiss the
selection every time.
I took the opportunity to move the actual responsibility for key event
dispatch into HwndTerminal. In the future, I'd like to make more of the
TerminalXxx calls just call impl methods on HwndTerminal.
This commit adds a `WT_PROFILE_ID` environment variable, which contains
the guid of the active profile.
It also teaches ConptyConnection to take an environment map on creation.
We had to do a little manual jiggery with the WSLENV environment
variable as passed by the creator.
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already.
Ran terminal, validated vars and translated paths under windows and WSL.
References #4566 (this PR originally introduced WT_SETTINGS/DEFAULTS)
Closes#3589
The scroll locking rework that landed with the DxRenderer's partial
invalidation change introduced a deadlock. UIA locks the buffer for
reading before asking it to scroll (which now requires a write lock.)
Scrolling is probably _okay_ to have a little bit of torn state that
might arise from us unlocking the read lock early before triggering the
write lock down the line.
While investigating this, I also noticed that our bounding rects stopped
being viewport-relative (and were instead buffer-relative.) That
regressed with the switch to `GetTextRects` in #4991
## PR Checklist
* [ ] Closes (issues noticed in investigating the DPI changes)
* [x] CLA signed.
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] Core contributor badge
## Validation Steps Performed
Manual pass with inspect.exe
## Summary of the Pull Request
Adds SS3 cursor encoding for cursor keys and home/end button. Reverts a portion of #4913 that checks for VT Input Mode.
## PR Checklist
* [X] Closes#4873
## Validation Steps Performed
1. Open pwsh
2. run `wsl`
3. execute `printf "\e[?1h"`
4. verify keys work
5. exit back to pwsh
6. verify keys work still (didn't previously)
Also verified that those keys work in vim when connected to my Raspberry Pi over SSH.
## Summary of the Pull Request
This pull request ports the VT mouse code from TermControl to WpfTerminalControl. Our WPF control is a lot closer to Win32 than to Xaml, so our mouse event handler looks _nothing_ like the one that we got from Xaml. We can pass events through almost directly, because the window message handling in the mouse input code actually came from _conhost_. It's awesome.
Neither TermControl nor conhost pass hover events through when the control isn't focused, so I wired up focus events to make sure we acted the same.
Just like Terminal and conhost, mouse events are suppressed when <kbd>Shift</kbd> is held.
## Validation Steps Performed
Tested with MC, and tested by manually engaging SGR events in an Echo terminal.
## Summary of the Pull Request
This pull request ports #5096 to WpfTerminalControl, bringing it in line with the selection mechanics in Terminal. It also introduces double- and triple-click selection and makes sure we clear the selection when we resize.
Please read #5096 for more details.
## Detailed Description of the Pull Request / Additional comments
This code is, largely, copy-and-pasted from TermControl with some updates to use `std::chrono` and `til::point`. I love `til::point`. A lot.
## Validation Steps Performed
Lots of manual selection.
## Summary of the Pull Request
This pull request fixes a crash on scrolling down (overflow exception cramming the signed short upper WORD of the wParam into an actual signed short on x64) and a crash on key input caused by improper use of `Marshal.ReadByte` on an integer (instead of a memory address).
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
Manually did those things on x64.
This commit fixes a number of problems and code quality/health issues
with the AzureConnection.
This is a general tidying-up of the azure connection. It improves error
logging (like: it actually emits error logs...) and retry logic and the
state machine and it audits the exit points of the state machine for
exceptions and removes the HRESULT returns (so they either succeed and
transition to a new state or throw an exception or are going down
anyway).
There's also a change in here that changes how we display tenants. It
adds the "default domain" to the name, so that instead of seeing this:
Conhost (aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa)
Default Directory (bbbbbbbb-bbbb-bbbb-bbbb-bbbbbbbbbbbb)
you see this
Conhost (conhost.onmicrosoft.com)
Default Directory (dustinhowett.onmicrosoft.com)
Changes:
* rework tenant/tenant storage and fix display names
Switch to the 2020 tenant API.
Instead of passing around four loose variables, create a Tenant class
and use that for packing/unpacking into/out of json (and the windows
credential store, where we "cleverly" used json for the tenant info
there too).
When displaying a tenant, use its display name if there is one, the
unknown resource string if there isn't, and the default domain if
there is one and the ID if there isn't.
Fixes#5325.
* use {fmt} for formatting request bodies
* remove dead strings
* rework/rename Request/HeaderHelper to
Send(Authenticated)ReqReturningJson
* rewrite polling to use std::chrono
* remove HR returns from state machine
* rename state handlers from _XHelper to _RunXState
* cleanup namespaces, prefix user input with >, remove namespaces
* Rework error handling
- _RequestHelper no longer eats exceptions.
- Delete the "no internet" error message.
- Wrap exceptions coming out of Azure API in a well-known type.
- Catch by type.
- Extract error codes for known failures (keep polling, invalid
grant).
- When we get an Invalid Grant, dispose of the cached refresh token
and force the user to log in again.
- Catch all printable exceptions and print them.
- Remove the NoConnect state completely -- just bail out when an
exception hits the toplevel of the output thread.
- Move 3x logic into _RefreshTokens and pop exceptions out of it.
- Begin abstracting into AzureClient
Fixes#5325 (by addressing its chief complaint).
Fixes#4803 (by triggering auth flow again if the token expires).
Improves diagnosability for #4575.
# Summary of the Pull Request
This PR will allow the cursor to be double width when on top of a double width character. This required changing `IsCursorDoubleWidth` to check whether the glyph the cursor's on top of is double width. This code is exactly the same as the original PR that addressed this issue in #2932. That one got reverted at some point due to the crashes related to it, but due to a combination of Terminal having come further since that PR and other changes to address use-after-frees, some of the crashes may/may not be relevant now. The ones that seemed to be relevant/repro-able, I attempt to address in this PR.
The `IsCursorDoubleWidth` check would fail during the `TextBuffer::Reflow` call inside of `Terminal::UserResize` occasionally, particularly when `newCursor.EndDeferDrawing()` is called. This is because when we tell the newCursor to `EndDefer`, the renderer will attempt to redraw the cursor. As part of this redraw, it'll ask if `IsCursorDoubleWidth`, and if the renderer managed to ask this before `UserResize` swapped out the old buffer with the new one from `Reflow`, the renderer will be asking the old buffer if its out-of-bounds cursor is double width. This was pretty easily repro'd using `cmatrix -u0` and resizing the window like a madman.
As a solution, I've moved the Start/End DeferDrawing calls out of `Reflow` and into `UserResize`. This way, I can "clamp" the portion of the code where the newBuffer is getting created and reflowed and swapped into the Terminal buffer, and only allow the renderer to draw once the swap is done. This also means that ConHost's `ResizeWithReflow` needed to change slightly.
In addition, I've added a WriteLock to `SetCursorOn`. It was mentioned as a fix for a crash in #2965 (although I can't repro), and I also figured it would be good to try to emulate where ConHost locks with regards to Cursor operations, and this seemed to be one that we were missing.
## PR Checklist
* [x] Closes#2713
* [x] CLA signed
* [x] Tests added/passed
## Validation Steps Performed
Manual validation that the cursor is indeed chonky, added a test case to check that we are correctly saying that the cursor is double width (not too sure if I put it in the right place). Also open to other test case ideas and thoughts on what else I should be careful for since I am quite nervous about what other crashes might occur.
## Summary of the Pull Request
When WSL vim prints the initial empty buffer (the one that's just a bunch of '\~'s), it prints this by doing the following:
* Print '\~' followed by enough spaces to clear the line
* Use CUP (`^[[H`) to move the cursor to the start of the next line
* repeat until the buffer is full
When we'd get the line of "\~ "... in conhost, we'd mark that line as wrapped.
Logically, it doesn't really make any sense that when we follow that up by moving the cursor, the line is wrapped. However, this is just how conhost is right now.
This wasn't ever a problem in just conhost before, because we really didn't care if lines in the alt buffer were "wrapped" or not. Plus, when vim would get resized, it would just reprint it's own buffer anyways. Nor was this a problem in conpty before this year (2020). We've only just recently added logic to conpty to try and preserve wrapped lines.
Initially, I tried fixing this by breaking the line manually when the cursor was moved. This seemed to work great, except for the win32 vim.exe. Vim.exe doesn't emit a newline or a CUP to get to the next line. It just _goes for it_ and keeps printing. So there's _no way_ for us to know the line broke, because they're essentially just printing one long line, assuming we'll automatically move the cursor.
So instead, I'm making sure to emit the proper number of spaces at the end of a line when the line is wrapped. We won't do any funny business in that scenario and try to optimize for them, we'll _just print the spaces_.
## References
* #5181 - This change regressed this
* #4415 - Actually implemented wrapped lines in conpty
## PR Checklist
* [x] Closes#5291
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Wrote a unittest first and foremost
* Checked vtpipeterm to make sure vim still works
* checked Terminal to make sure vim still works
Loc issues are given to us through the internal bug tracker.
* Lock some strings, or parts of strings, that should not be localized.
* Switch to positional format parameters
* Remove the forced newlines in the warning resources; insert them at
runtime
Fixes MSFT:25936156.
If an application writes to the screen while not in VT mode, and the
user has scrolled forward in the screen buffer, the _virtual bottom_
location is not updated to take that new content into account. As a
result, the viewport can later jump back to the previous _virtual
bottom_, making the content disappear off screen. This PR attempts to
fix that issue by updating the _virtual bottom_ location whenever the
cursor moves below that point.
## PR Checklist
* [x] CLA signed.
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
This simply adds a condition in the
`SCREEN_INFORMATION::SetCursorPosition` to check if the new _Y_
coordinate is below the current _virtual bottom_, and if so, updates the
_virtual bottom_ to that new value.
I considered trying to make it only update when something is actually
written to the screen, but this seemed like a cleaner solution, and is
less likely to miss out on a needed update.
## Validation Steps Performed
I've manually tested the case described in issue #5302, and confirmed
that it now works as expected. I've also added a unit test that checks
the virtual bottom is updated correctly under similar conditions.
Closes#5302
This fixes an issue where a shift+click selection with `copyOnSelect`
enabled would result in copying the content as a single line.
## Detailed Description of the Pull Request / Additional comments
I've been thinking a lot about this issue and how it relates to the
copy/paste discussions we've been having over the past few weeks.
Considering that the majority of users want regular copy, it makes sense
to default to that in this case too.
If a user wants to perform a special form of copy, it makes sense that
they should use their custom keybinding to accomplish that. This kind of
behavior aligns with that kind of philosophy.
## Validation Steps Performed
The following scenarios were tested with `copyOnSelect` enabled.
| scenario | behavior |
|-----------------------------------------|-------------------------------|
| Perform a shift+click selection | content copied w/ newlines |
| right-click | clipboard paste |
| copy keybinding (`singleLine` disabled) | content copied w/ newlines |
| copy keybinding (`singleLine` enabled) | content copied as single line |
Closes#4737
_This is literally just #1357, but moved to the `drafts/` folder_. Since
@dsafa doesn't have the time to finish this on their own, we'll take it
from here for 2.0 ☺️
## Summary of the Pull Request
Adds a spec describing jumplist integration and adding profiles to the jumplist. Includes details about previous investigations into adding the jumplist.
## PR Checklist
* [x] Specs #576
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [n/a] Tests added/passed
* [x] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #576
## Detailed Description of the Pull Request / Additional comments
Details in the spec.
## Validation Steps Performed
N/A
Co-authored-by: Brandon Chong <brndnchong@gmail.com>
## Summary of the Pull Request
Renderer: Add support for backoff and auto-disable on failed retry
This commit introduces a backoff (150ms * number of tries) to the
renderer's retry logic (introduced in #2830). It also changes the
FAIL_FAST to a less globally-harmful render thread disable, so that we
stop blowing up any application hosting a terminal when the graphics
driver goes away.
In addition, it adds a callback that a Renderer consumer can use to
determine when the renderer _has_ failed, and a public method to kick it
back into life.
Fixes#5340.
This PR also wires up TermControl so that it shows some UI when the renderer tastes clay.
## PR Checklist
* [x] Closes#5340
* [x] cla
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already.
## Validation Steps Performed
I tested this by dropping the number of retries to 1 and forcing a TDR while doing `wsl cmatrix -u0`. It picked up exactly where it left off.
As a bonus, you can actually still type into the terminal when it's graphically suspended (and `exit` still works.). The block is _entirely graphical_.
We received a request from our localization team to switch from
printf-style format strings (%s, %u) to format strings with positional
argument support. I've been hoping for a long time to take a dependency
on C++20's std::format, but we're just not somewhere we can do that.
Enter fmt. fmt is _exactly_ the library we need.
Minor comparison:
std::wstring_view world = /* ... */;
auto str{ wil::str_printf<std::wstring>(L"hello %.*s",
gsl::narrow_cast<size_t>(world.size()),
world.data()) };
---
auto str{ fmt::format(L"hello {0}", world) };
If you really want to use the print specifiers:
auto str{ fmt::printf(L"hello %s", world) };
It's got optional compile-time checking for format strings and is
MIT-licensed. Eventually, we should be able to replace fmt:: with std::
and end up pretty much where we left off.
What more could you ask for?
The Tango color scheme is part of the Tango Desktop Project, which was
released to the public domain in 2009.
More information is available at http://tango-project.org/.
This commit adds the "Tango Dark" and "Tango Light" color scheme
presets.
Closes#5281
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
## Summary of the Pull Request
Adjusts DirectX renderer to use `til::bitmap` to track invalidation
regions. Uses special modification to invalidate a row-at-a-time to
ensure ligatures and NxM glyphs continue to work.
## References
Likely helps #1064
## PR Checklist
* [x] Closes#778
* [x] I work here.
* [x] Manual testing performed. See Performance traces in #778.
* [x] Automated tests for `til` changes.
* [x] Am core contributor. And discussed with @DHowett-MSFT.
## Detailed Description of the Pull Request / Additional comments
- Applies `til::bitmap` as the new invalidation scheme inside the
DirectX renderer and updates all entrypoints for collecting
invalidation data to coalesce into this structure.
- Semi-permanently routes all invalidations through a helper method
`_InvalidateRectangle` that will expand any invalidation to cover the
entire line. This ensures that ligatures and NxM glyphs will continue
to render appropriately while still allowing us to dramatically reduce
the number of lines drawn overall. In the future, we may come up with
a tighter solution than line-by-line invalidation and can modify this
helper method appropriately at that later date to further scope the
invalid region.
- Ensures that the `experimental.retroTerminalEffects` feature continues
to invalidate the entire display on start of frame as the shader is
applied at the end of the frame composition and will stack on itself
in an amusing fashion when we only redraw part of the display.
- Moves many member variables inside the DirectX renderer into the new
`til::size`, `til::point`, and `til::rectangle` methods to facilitate
easier management and mathematical operations. Consequently adds
`try/catch` blocks around many of the already-existing `noexcept`
methods to deal with mathematical or casting failures now detected by
using the support classes.
- Corrects `TerminalCore` redraw triggers to appropriately communicate
scrolling circumstances to the renderer so it can optimize the draw
regions appropriately.
- Fixes an issue in the base `Renderer` that was causing overlapping
scroll regions due to behavior of `Viewport::TrimToViewport` modifying
the local. This fix is "good enough" for now and should go away when
`Viewport` is fully migrated to `til::rectangle`.
- Adds multiplication and division operators to `til::rectangle` and
supporting tests. These operates will help scale back and forth
between a cell-based rectangle and a pixel-based rectangle. They take
special care to ensure that a pixel rectangle being divided downward
back to cells will expand (with the ceiling division methods) to cover
a full cell when even one pixel inside the cell is touched (as is how
a redraw would have to occur).
- Blocks off trace logging of invalid regions if no one is listening to
optimize performance.
- Restores full usage of `IDXGISwapChain1::Present1` to accurately and
fully communicate dirty and scroll regions to the underlying DirectX
framework. This additional information allows the framework to
optimize drawing between frames by eliminating data transfer of
regions that aren't modified and shuffling frames in place. See
[Remarks](https://docs.microsoft.com/en-us/windows/win32/api/dxgi1_2/nf-dxgi1_2-idxgiswapchain1-present1#remarks)
for more details.
- Updates `til::bitmap` set methods to use more optimized versions of
the setters on the `dynamic_bitset<>` that can bulk fill bits as the
existing algorithm was noticeably slow after applying the
"expand-to-row" helper to the DirectX renderer invalidation.
- All `til` import hierarchy is now handled in the parent `til.h` file
and not in the child files to prevent circular imports from happening.
We don't expect the import of any individual library file, only the
base one. So this should be OK for now.
## Validation Steps Performed
- Ran `cmatrix`, `cmatrix -u0`, and `cacafire` after changes were made.
- Made a bunch of ligatures with `Cascadia Code` in the Terminal
before/after the changes and confirmed they still ligate.
- Ran `dir` in Powershell and fixed the scrolling issues
- Clicked all over the place and dragged to make sure selection works.
- Checked retro terminal effect manually with Powershell.
* Add a spec for the Command Palette
specs #2046.
* Apply suggestions from code review
Co-Authored-By: Carlos Zamora <carlos.zamora@microsoft.com>
* * Add note from Carlos about UIA
* Add a note about nested commands
* fix Michael's comments
* Move to `doc/specs/`
* Apply suggestions from code review
Co-Authored-By: Dustin L. Howett (MSFT) <duhowett@microsoft.com>
* Add updates from Dustin
esp. considering keybindings args, localization
* add notes about expanding profiles, localization
* move this spec to the drafts folder
Co-authored-by: Carlos Zamora <carlos.zamora@microsoft.com>
Co-authored-by: Dustin L. Howett (MSFT) <duhowett@microsoft.com>
## Summary of the Pull Request
Implements `copyFormatting` as a global setting. When enabled, formatting such as font and foreground/background colors are copied to the clipboard on _all_ copy operations.
Also updates the schema and docs.
## References
#5212 - Spec for Formatted Copying
#4191 - Setting to enable/disable formatted copy
#5263 - PR prematurely merged without approval of #5212
This feature will also have an impact on these yet-to-be-implemented features:
- #5262 - copyFormatting Keybinding Arg for Copy
- #1553 - Pointer Bindings
- #4191 - add array support for `copyFormatting`
## Detailed Description of the Pull Request
We already check if the hstring passed into the clipboard is empty before setting it. So the majority of the changes are actually just adding the global setting in.
## Validation Steps Performed
| `copyFormatting` | Mouse Copy | Keyboard Copy |
|--|--|--|
| not set (`false`) | ✔ | ✔ |
| `true` | ✔ | ✔ |
| `false` | ✔ | ✔ |
## Summary of the Pull Request
When a pane is closed by a connection, we want to wait until the connection is actually `Closed` before we fire the actual `Closed` event. If the connection didn't close gracefully, there are scenarios where we want to print a message to the screen.
However, when a pane is closed by the UI, we don't really care to wait for the connection to be completely closed. We can just do it whenever. So I've moved that call to be on a background thread.
## PR Checklist
* [x] Closes#1996
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Previously we'd wait for the connection to close synchronously when closing tabs or panes. For misbehaving applications like `ssh.exe`, that could result in the `Close` needing to `WaitForSingleObject` _on the UI thread_. If the user closed the tab / pane either with a keybinding or with some other UI element, they don't really care to see the error message anymore. They just want the pane closed. So there's no need to wait for the actual connection to close - the app can just continue on with whatever it was doing.
## Validation Steps Performed
Messed around with closing tabs, panes, tabs with many panes, the entire window. Did this with keybindings, or by clicking on the 'x' on the tab, the 'x' on the window, or using middle-click.
I'm always scared of things like this, so there's a 50% chance this makes things horribly worse.
## Summary of the Pull Request
This updates defaults.json to include the default values for all global and profile settings. Most default keybinding args are added too. This also updates a few outdated items found in the docs.
## PR Checklist
* [X] Closes#5189
## Validation Steps Performed
After making the changes, I made sure all of the settings are deserialized by debugging and stepping through the `LayerJson` code.
- [X] Global Settings
I was mainly looking for two things:
- the key/value pair is found and read
- the value did not change before/after the pair was read
This pull request makes sure we still get a usable (for troubleshooting purposes) version number in the about dialog and settings file when the user is running unpackaged.
This introduces a magic LCID constant (0x0409).B y default, Package ES emits
version resource information that says we're localized to ... language zero.
It also emits a language-coded version block for 0x0409 (en-US).
These two things cannot both be true. Collapse the wave function by hardcoding
0x0409.
This adds support for the VT escape sequence that requests the
terminal's operating status. There is no attempt to actually verify the
status of the app, though. We always return a response indicating a good
operating condition (the same as most terminal emulators).
## PR Checklist
* [x] CLA signed.
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
This required an update to the `OutputStateMachineEngine` to accept the
`DSR-OS` type, since it only dispatches types that it recognises (I
think that's unnecessary, but that's an issue for another day).
The actual processing of the request is handled in the `AdaptDispatch`
class, where it simply responds with a hard coded sequence (`CSI 0 n`),
indicating a good operating condition.
## Validation Steps Performed
I've added unit tests to confirm that the request is dispatched
correctly, and the appropriate response is returned. I've also manually
confirmed that the test of the _Device Status Report_ in _Vttest_ is now
succeeding.
Closes#5052
## Summary of the Pull Request
Implements `copyFormatting` as a global setting. When enabled, formatting such as font and foreground/background colors are copied to the clipboard on _all_ copy operations.
Also updates the schema and docs.
## References
#5212 - Spec for Formatted Copying
#4191 - Setting to enable/disable formatted copy
This feature will also have an impact on these yet-to-be-implemented features:
- #5262 - copyFormatting Keybinding Arg for Copy
- #1553 - Pointer Bindings
## PR Checklist
* [X] Closes#4191
## Detailed Description of the Pull Request / Additional comments
We already check if the hstring passed into the clipboard is empty before setting it. So the majority of the changes are actually just adding the global setting in.
## Validation Steps Performed
| `copyFormatting` | Mouse Copy | Keyboard Copy |
|--|--|--|
| not set (`false`) | ✔ | ✔ |
| `true` | ✔ | ✔ |
| `false` | ✔ | ✔ |
Now that the Terminal is doing a better job of actually marking which
lines were and were not wrapped, we're not always copying lines as
"wrapped" when they should be. We're more correctly marking lines as not
wrapped, when previously we'd leave them marked wrapped.
The real problem is here in the `ScrollFrame` method - we'd manually
newline the cursor to make the terminal's viewport shift down to a new
line. If we had to scroll the viewport for a _wrapped_ line, this would
cause the Terminal to mark that line as broken, because conpty would
emit an extra `\n` that didn't actually exist.
This more correctly implements `ScrollFrame`. Now, well move where we
"thought" the cursor was, so when we get to the next `PaintBufferLine`,
if the cursor needs to newline for the next line, it'll newline, but if
we're in the middle of a wrapped line, we'll just keep printing the
wrapped line.
A couple follow up bugs were found to be caused by the same bad logic.
See #5039 and #5161 for more details on the investigations there.
## References
* #4741 RwR, which probably made this worse
* #5122, which I branched off of
* #1245, #357 - a pair of other conpty wrapped lines bugs
* #5228 - A followup issue for this PR
## PR Checklist
* [x] Closes#5113
* [x] Closes#5180 (by fixing DECRST 25)
* [x] Closes#5039
* [x] Closes#5161 (by ensuring we only `removeSpaces` on the actual
bottom line)
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Checked the cases from #1245, #357 to validate that they still work
* Added more and more tests for these scenarios, and then I added MORE
tests
* The entire team played with this in selfhost builds
When the connection printed text immediately, synchronously, as part of
Start() it would cause terminal to deadlock. We should start the
connection outside of lock.
The ConptyConnection would do this when it failed to launch something
(trivial repro: `wt -- xyz`).
The TelnetConnection would do this all the time, because local loopback
telnet is fast and easy.
This commit introduces another template replacement for the user's
default settings, COMMAND_PROMPT_LOCALIZED_NAME, which will be replaced
with the contents of the CommandPromptDisplayName resource.
By default, that will be "Command Prompt." This name change will apply
only for new users, and only on first launch. Changes in the system
locale after first launch will not impact the name of the profile.
If the user _removes_ the name from their command prompt profile, its
name will revert irrecoverably to "Command Prompt". They will not be
given a chance to regenerate a localized name.
Fixes#4476.
## Summary of the Pull Request
Renames the `requestedTheme` global setting to `theme`. Propagates updates to...
- schema
- doc
- defaults.json
- universal-defaults.json
## PR Checklist
* [X] Closes#5264
## Validation Steps Performed
| `theme` | Success? |
|--|--|
| `system` | ✔ |
| `light` | ✔ |
| `dark` | ✔ |
But we really know that `dark` is the one we care about here 😉
My basic idea was that `WM_CHAR` is just the better `WM_KEYDOWN`.
The latter fails to properly support common dead key sequences like in
#3516.
As such I added some logic to `Terminal::SendKeyEvent` to make it return
false if the pressed key represents a printable character.
This causes us to receive a character event with a (hopefully) correctly
composed code unit, which then gets sent to `Terminal::SendCharEvent`.
`Terminal::SendCharEvent` in turn had to be modified to support
potentially pressed modifier keys, since `Terminal::SendKeyEvent` isn't
doing that for us anymore.
Lastly `TerminalInput` had to be modified heavily to support character
events with modifier key states. In order to do so I merged its
`HandleKey` and `HandleChar` methods into a single one, that now handles
both cases.
Since key events will now contain character data and character events
key codes the decision logic in `TerminalInput::HandleKey` had to be
rewritten.
## PR Checklist
* [x] CLA signed
* [x] Tests added/passed
* [x] I've discussed this with core contributors already.
## Validation Steps Performed
* See #3516.
* I don't have any keyboard that generates surrogate characters. Due to
this I modified `TermControl::_SendPastedTextToConnection` to send the
data to `_terminal->SendCharEvent()` instead. I then pasted the test
string ""𐐌𐐜𐐬" and ensured that the new `TerminalInput::_SendChar`
method still correctly assembles surrogate pairs.
Closes#3516Closes#3554 (obsoleted by this PR)
Potentially impacts #391, which sounds like a duplicate of #3516
This pull request introduces unexpanded variables (`%DEFAULT_PROFILE%`,
`%VERSION%` and `%PRODUCT%`) to the user settings template and code to
expand them.
While doing this, I ran into a couple things that needed to widen from
accepting strings to accepting string views. I also had to move
application name and version detection up to AppLogic and expose the
AppLogic singleton.
The dynamic profile generation logic had to be moved to before we inject
the templated variables, as the new default profile depends on the
generated dynamic profiles.
References #5189, #5217 (because it has a dependency on `VERSION` and
`PRODUCT`).
## PR Checklist
* [x] Closes#2721
* [x] CLA signed
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already
## Validation Steps Performed
Deleted my settings and watched them regenerate.
The terminal lock is really only for the terminal; since the renderer is
fully owned by the control, not the Terminal, and we'll only be
receiving swap chain events after we register them during
initialization, we don't need to lock before _or_ after firing off the
coroutine.
Fixes#5203.
## Summary of the Pull Request
If we receive a _Reset to Initial State_ (`RIS`) sequence while in the alternate screen buffer, we should be switching back to the main buffer. This PR fixes that behavior.
## PR Checklist
* [x] Closes#3685
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
I've added a condition at the start of the `AdaptDispatch::HardReset` method to check whether we're using the alt buffer, and if so, call the `ConGetSet::PrivateUseMainScreenBuffer` API to switch back to the main buffer.
Calling `AdaptDispatch::UseMainScreenBuffer` would probably be neater for this, but it would also attempt to restore the cursor state, which seems pointless when we're in the process of resetting everything anyway.
## Validation Steps Performed
I've added a screen buffer test to confirm that the `RIS` sequence does actually switch back to the main buffer. I've also manually confirmed that the test case in issue #3685 does now behave as expected.
A side effect of the `SetConsoleCursorInfo` API is that it resets the
cursor type to _Legacy_. This makes it impossible to change the cursor
visibility via the console APIs without also resetting the user's
preferred cursor type. This PR attempts to fix that limitation, by only
resetting the cursor type if the size has also been changed.
## PR Checklist
* [x] Closes#4124
* [x] CLA signed
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I suspect the reason for the original behaviour was because the
`SetConsoleCursorInfo` API sets both the visibility and the size, and if
you're setting the size, it's assumed you'd want the _Legacy_ cursor
type, because that's the only style for which the size is applicable.
So my solution was to only reset the cursor type if the requested cursor
size was actually different from the current size. That should be
reasonably backwards compatible with most size-changing code, but also
allow for changing the visibility without resetting the cursor type.
## Validation Steps Performed
I've tested the example code from issue #4124, and confirmed that it now
works correctly without resetting the cursor type.
I've also tested the console's _mark mode_, which temporarily changes
the cursor size while selecting. I've confirmed that the size still
changes, and that the original cursor type is restored afterwards.
## Summary of the Pull Request
Edits the definition file to distinguish further between the rolling build (the one that happens in master as it's updated) and the PR builds (that happen on every push to a pull request to master.) We will build less in PR since it rolls so often by removing the lines that reveal very few to no bugs at PR time. We'll leave them on in rolling so stuff can still be caught.
## PR Checklist
* [x] Closes a desire to not waste builds.
* [x] I work here.
* [ ] We'll see if the build still works.
* [x] No specific docs.
* [x] I talked about this with @DHowett-MSFT already.
## Validation Steps Performed
* [x] This PR itself should validate that the definition still works in PRs. I think we have to wait for it to go to master to see if the trigger still works there.
This is a subset of #3578 which I think is harmless and the first step towards making things right.
References #3546#3578
## Detailed Description of the Pull Request / Additional comments
For more robust Unicode support, `CodepointWidthDetector` should provide concrete width information rather than a simple boolean of `IsWide`. Currently only `IsWide` is widely used and optimized using quick lookup table and fallback cache. This PR moves those optimization into `GetWidth`.
## Validation Steps Performed
API remains unchanged. Things are not broken.
## Summary of the Pull Request
Minor cleanup on the schema. Globals isn't accepted anymore,
so the schema should not help you autocomplete anymore.
## Validation Steps Performed
Imported the new schema. You do _not_ get a warning when globals
is in. But, the schema won't suggest things when inside globals.
It's just treated as an unknown item.
However, "defaultProfile" is still required (more of a sanity test)
## Summary of the Pull Request
In preparation for getting more accessibility-related issues, I added an ID to the `ScreenInfoUiaProvider` (SIUP) and abstracted the one from `UiaTextRange`. Using this, I noticed that we are creating SIUPs when a new tab/pane is created. This is _good_. This means that we need to somehow notify a UIA Client that out structure has changed, and we need to use the new SIUP because the old one has been removed.
I'll be investigating that more after this PR lands.
Because we cannot set RequestedTheme at the application level, we
occasionally run into issues where parts of our UI end up themed
incorrectly. Dialogs, for example, live under a different Xaml root
element than the rest of our application. This makes our popup menus and
buttons "disappear" when the user wants Terminal to be in a different
theme than the rest of the system. This hack---and it _is_ a
hack--walks up a dialog's ancestry and forces the theme on each element
up to the root. We're relying a bit on Xaml's implementation details
here, but it does have the desired effect.
It's not enough to set the theme on the dialog alone.
Fixes#3654.
Fixes#5195.
## Summary of the Pull Request
Added `splitMode` to settings schema JSON and md files.
The definition might need some tweaking.
## References
## PR Checklist
* [x] Closes#4939
## Summary of the Pull Request
`TrimWhitespace` is misleading. So it is now renamed as 'singleLine'. If true, it comes out as a single line! That makes more sense!
## PR Checklist
* [X] Closes#3824
## Validation Steps Performed
Attempted the keybinding with both settings (and none set).
Attempted mouse copy with and without shift.
## Summary of the Pull Request
Add `null`, `unbound` to schema for keybindings
## PR Checklist
* [x] Closes#4751
* [x] I work here
* [n/a] Tests added/passed
* [x] Requires documentation to be updated
## Summary of the Pull Request
When conpty is in VT input mode, we pass through all the input we receive. This includes all the other `Action*Dispatch` methods, but missed this one.
## References
* Missed during #4856
* Discovered during the course of the #4192 review
* #5205 Also investigated part of the issue, but found a different bug.
## PR Checklist
* [x] Doesn't close anything, just related to above things.
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This will fix the <kbd>ctrl+alt+space</kbd> in the Terminal thing mentioned in #4192, but doesn't actually resolve the root cause of that bug (which is tracked in #5205).
## Summary of the Pull Request
When we're restoring from minimized, that `MonitorFromWindow` call is returning null. Curious that we're getting null here, when [MSDN states](https://docs.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-monitorfromwindow):
> If the window is currently minimized, MonitorFromWindow uses the rectangle of the window before it was minimized.
Turns out, `MONITOR_DEFAULTTONEAREST` just fixes this.
## References
* #4857 - original PR that added this code block
## PR Checklist
* [x] Closes#5209
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Verified manually
_Technically_, "wether" is a word but I'd be shocked if there's a scenario for
us to use it properly in this repo, so I'm pulling it from the dictionary.
Also, in #5200, we added "VTE", which is totally a valid acronym, to the codebase,
but not the whitelist. I'm not sure why the bot let me merge it anyways, but I'm
fixing it now.
This pull request migrates `profiles.json` to `settings.json` and removes the legacy roaming AppData settings migrator.
It also:
* separates the key bindings in defaults.json into logical groups
* syncs the universal terminal defaults with the primary defaults
* removes some stray newlines that ended up at the beginning of settings.json and defaults.json
Fixes#5186.
Fixes#3291.
### categorize key bindings
### sync universal with main
### kill stray newlines in template files
### move profiles.json to settings.json
This commit also changes Get*Settings from returning a string to
returning a std::filesystem::path. We gain in expressiveness without a
loss in clarity (since path still supports .c_str()).
NOTE: I tried to do an atomic rename with the handle open, but it didn't
work for reparse points (it moves the destination of a symbolic link
out into the settings folder directly.)
(snip for atomic rename code)
```c++
auto path{ pathToSettingsFile.wstring() };
auto renameBufferSize{ sizeof(FILE_RENAME_INFO) + (path.size() * sizeof(wchar_t)) };
auto renameBuffer{ std::make_unique<std::byte[]>(renameBufferSize) };
auto renameInfo{ reinterpret_cast<FILE_RENAME_INFO*>(renameBuffer.get()) };
renameInfo->Flags = FILE_RENAME_FLAG_REPLACE_IF_EXISTS | FILE_RENAME_FLAG_POSIX_SEMANTICS;
renameInfo->RootDirectory = nullptr;
renameInfo->FileNameLength = gsl::narrow_cast<DWORD>(path.size());
std::copy(path.cbegin(), path.cend(), std::begin(renameInfo->FileName));
THROW_IF_WIN32_BOOL_FALSE(SetFileInformationByHandle(hLegacyFile.get(),
FileRenameInfo,
renameBuffer.get(),
gsl::narrow_cast<DWORD>(renameBufferSize)));
```
(end snip)
### Stop resurrecting dead roaming profiles
## Summary of the Pull Request
As we've learned in #979, not all touchpads are created equal. Some of them have bad drivers that makes scrolling inactive windows not work. For whatever reason, these devices think the Terminal is all one giant inactive window, so we don't get the mouse wheel events through the XAML stack. We do however get the event as a `WM_MOUSEWHEEL` on those devices (a message we don't get on devices with normally functioning trackpads).
This PR attempts to take that `WM_MOUSEWHEEL` and manually dispatch it to the `TermControl`, so we can at least scroll the terminal content.
Unfortunately, this solution is not very general purpose. This only works to scroll controls that manually implement our own `IMouseWheelListener` interface. As we add more controls, we'll need to continue manually implementing this interface, until the underlying XAML Islands bug is fixed. **I don't love this**. I'd rather have a better solution, but it seems that we can't synthesize a more general-purpose `PointerWheeled` event that could get routed through the XAML tree as normal.
## References
* #2606 and microsoft/microsoft-ui-xaml#2101 - these bugs are also tracking a similar "inactive windows" / "scaled mouse events" issue in XAML
## PR Checklist
* [x] Closes#979
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I've also added a `til::point` conversion _to_ `winrt::Windows::Foundation::Point`, and some scaling operators for `point`
## Validation Steps Performed
* It works on my HP Spectre 2017 with a synaptics trackpad
- I also made sure to test that `tmux` works in panes on this laptop
* It works on my slaptop, and DOESN'T follow this hack codepath on this machine.
## Summary of the Pull Request
Reduce the number of times we dispatch a cursor changed event. We were firing it every time the renderer had to do anything related to the cursor. Unfortunately, blinking the cursor triggered this behavior. Now we just check if the position has changed.
## PR Checklist
* [X] Closes#5143
## Validation Steps Performed
Verified using Narrator
Also verified #3791 still works right
## Summary of the Pull Request
This PR clamps the parameter values in the VT `StateMachine` parser to 32767, which was the initial limit prior to PR #3956. This fixes a number of overflow bugs (some of which could cause the app to crash), since much of the code is not prepared to handle values outside the range of a `short`.
## References
#3956 - the PR where the cap was changed to the range of `size_t`
#4254 - one example of a crash caused by the higher range
## PR Checklist
* [x] Closes#5160
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
The DEC STD 070 reference recommends supporting up to at least 16384 for parameter values, so 32767 should be more than enough for any standard VT sequence. It might be nice to increase the limit to 65535 at some point, since that is the cap used by both XTerm and VTE. However, that is not essential, since there are very few situations where you'd even notice the difference. For now, 32767 is the safest choice for us, since anything greater than that has the potential to overflow and crash the app in a number of places.
## Validation Steps Performed
I had to make a couple of modifications to the range checks in the `OutputEngineTest`, more or less reverting to the pre-#3956 behavior, but after that all of the unit tests passed as expected.
I manually confirmed that this fixes the hanging test case from #5160, as well as overflow issues in the cursor operations, and crashes in `IL` and `DL` (see https://github.com/microsoft/terminal/issues/4254#issuecomment-575292926).
## Summary of the Pull Request
This is essentially a rewrite of the VT tab stop functionality, implemented entirely within the `AdaptDispatch` class. This significantly simplifies the `ConGetSet` interface, and should hopefully make it easier to share the functionality with the Windows Terminal VT implementation in the future.
By removing the dependence on the `SCREEN_INFORMATION` class, it fixes the problem of the the tab state not being preserved when switching between the main and alternate buffers. And the new architecture also fixes problems with the tabs not being correctly initialized when the screen is resized.
## References
This fixes one aspect of issue #3545.
It also supersedes the fix for #411 (PR #2816).
I'm hoping the simplification of `ConGetSet` will help with #3849.
## PR Checklist
* [x] Closes#4669
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
In the new tab architecture, there is now a `vector<bool>` (__tabStopColumns_), which tracks whether any particular column is a tab stop or not. There is also a __initDefaultTabStops_ flag indicating whether the default tab stop positions need to be initialised when the screen is resized.
The way this works, the vector is initially empty, and only initialized (to the current width of the screen) when it needs to be used. When the vector grows in size, the __initDefaultTabStops_ flag determines whether the new columns are set to false, or if every 8th column is set to true.
By default we want the latter behaviour - newly revealed columns should have default tab stops assigned to them - so __initDefaultTabStops_ is set to true. However, after a `TBC 3` operation (i.e. we've cleared all tab stops), there should be no tab stops in any newly revealed columns, so __initDefaultTabStops_ is set to false.
Note that the __tabStopColumns_ vector is never made smaller when the window is shrunk, and that way it can preserve the state of tab stops that are off screen, but which may come into range if the window is made bigger again.
However, we can can still reset the vector completely after an `RIS` or `TBC 3` operation, since the state can then be reconstructed automatically based on just the __initDefaultTabStops_ flag.
## Validation Steps Performed
The original screen buffer tests had to be rewritten to set and query the tab stop state using escape sequences rather than interacting with the `SCREEN_INFORMATION` class directly, but otherwise the structure of most tests remained largely the same.
However, the alt buffer test was significantly rewritten, since the original behaviour was incorrect, and the initialization test was dropped completely, since it was no longer applicable. The adapter tests were also dropped, since they were testing the `ConGetSet` interface which has now been removed.
I also had to make an addition to the method setup of the screen buffer tests (making sure the viewport was appropriately initialized), since there were some tests (unrelated to tab stops) that were previously dependent on the state being set in the tab initialization test which has now been removed.
I've manually tested the issue described in #4669 and confirmed that the tabs now produce the correct spacing after a resize.
## Summary of the Pull Request
You no longer _need_ to specify the `split` argument to `splitPane`, it will default to `Automatic` instead of `None`
## PR Checklist
* [x] Closes a discussion we had in team sync
* [x] I work here
* [x] Tests updated
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Also disables the tests that are broken in #5169 while I investigate
This commit removes support for:
* legacy keybindings of all types
* `colorScheme.colors`, as an array
* A `globals` object in the root of the settings file
* `profile.colorTable` and `profile.colorscheme` (the rare v0.1 all-lowercase variety)
Fixes#4091.
Fixes#1069.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
This PR will allow TSFInputControl to redraw its Canvas and TextBlock in response to when the Terminal cursor position updates. This will fix the issue where during Korean composition, the first symbol of the next composition will appear on top of the previous composed character. Since the Terminal Cursor updates a lot, I've added some checks to see if the TSFInputControl really needs to redraw. This will also decrease the number of actual redraws since we receive a bunch of `LayoutRequested` events when there's no difference between them.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4963
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Startup, teardown, CJK IME gibberish testing, making sure the IME block shows up in the right place.
This PR updates our internal tool `conechokey` to use `ReadConsoleInputW` by default. It also adds a flag `-a` to force it to use `ReadConsoleInputA`.
I discovered this while digging around for #1503, but figured I'd get this checked in now while I'm still investigating.
Since this is just a helper tool, I spent as little effort writing this change - yea the whole tool could benefit from cleaner code but _ain't nobody got time for that_.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Every single time a PR is run, there are a bunch of warnings about whitespace in the .cs files, so I ran the code format on those files, without changing their contents, so it won't be flagged anymore.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Ran the code-format utility on the .cs files
This pull request introduces the `til::math` namespace, which provides some casting functions to be used in support of `til::point` and `til::size`. When point/size want to ingest a floating-point structure, they _must_ be instructed on how to convert those floating-point values into integers.
This enables:
```
Windows::Foundation::Point wfPoint = /* ... */;
til::point tp{ til::math::rounding, wfPoint };
```
Future thoughts: should the TilMath types be stackable? Right now, you cannot get "checked + rounding" behavior (where it throws if it doesn't fit) so everything is saturating.
## PR Checklist
* [x] Closes a request by Michael
* [x] I've discussed this with core contributors already
Correct scrolling invalidation region for tmux in pty w/ bitmap
Add tracing for circling and scrolling operations. Fix improper
invalidation within AdjustCursorPosition routine in the subsection about
scrolling down at the bottom with a set of margins enabled.
## References
- Introduced with #5024
## Detailed Description of the Pull Request / Additional comments
- This occurs when there is a scroll region restriction applied and a
newline operation is performed to attempt to spin the contents of just
the scroll region. This is a frequent behavior of tmux.
- Right now, the Terminal doesn't support any sort of "scroll content"
operation, so what happens here generally speaking is that the PTY in
the ConHost will repaint everything when this happens.
- The PTY when doing `AdjustCursorPosition` with a scroll region
restriction would do the following things:
1. Slide literally everything in the direction it needed to go to take
advantage of rotating the circular buffer. (This would force a
repaint in PTY as the PTY always forces repaint when the buffer
circles.)
2. Copy the lines that weren't supposed to move back to where they were
supposed to go.
3. Backfill the "revealed" region that encompasses what was supposed to
be the newline.
- The invalidations for the three operations above were:
1. Invalidate the number of rows of the delta at the top of the buffer
(this part was wrong)
2. Invalidate the lines that got copied back into position (probably
unnecessary, but OK)
3. Invalidate the revealed/filled-with-spaces line (this is good).
- When we were using a simple single rectangle for invalidation, the
union of the top row of the buffer from 1 and the bottom row of the
buffer from 2 (and 3 was irrelevant as it was already unioned it)
resulted in repainting the entire buffer and all was good.
- When we switched to a bitmap, it dutifully only repainted the top line
and the bottom two lines as the middle ones weren't a consequence of
intersect.
- The logic was wrong. We shouldn't be invalidating rows-from-the-top
for the amount of the delta. The 1 part should be invalidating
everything BUT the lines that were invalidated in parts 2 and 3.
(Arguably part 2 shouldn't be happening at all, but I'm not optimizing
for that right now.)
- So this solves it by restoring an entire screen repaint for this sort
of slide data operation by giving the correct number of invalidated
lines to the bitmap.
## Validation Steps Performed
- Manual validation with the steps described in #5104
- Automatic test `ConptyRoundtripTests::ScrollWithMargins`.
Closes#5104
## Summary of the Pull Request
This pull request replaces about a hundred lines of manual xaml DOM code with a few lines of actual xaml, and wires up bound properties and event handlers in the good and correct way.
As part of this change, I've replaced the giant TextBlock in the about dialog with StackPanels, and replaced the Hyperlinks with HyperlinkButtons. This is in line with other platform applications.
URLs are _not_ localizable resources, so I moved them into the about dialog's xaml. Per #5138, we'll likely change them so that they get localization for "free" (dispatching based on the browser's language, without having to localize the URL in the application).
* Add a note about Binding multiple keys
From discussion in #4992
* Update doc/user-docs/UsingJsonSettings.md
Co-Authored-By: Josh Soref <jsoref@users.noreply.github.com>
* update the comment here to be a little clearer
Co-authored-by: Josh Soref <jsoref@users.noreply.github.com>
This commit rewrites a large swath of TermControl's initialization code.
* `TermControl` now _always_ has a `_terminal`; it will never be null
* Event registration for `_terminal` and any other available-at-init
fixtures has been moved into the constructor.
* Event handlers how more uniformly check `_closing` if they interact
with the _terminal.
* Swap chain attachment has been cleaned up and no longer uses a
coroutine when it's spawned from the UI thread.
* We have to register the renderer's swapchain change notification
handler after we set the swap chain, otherwise it'll call us back
when it initializes itself.
* `InitializeTerminal` now happens under the `_terminal`'s write lock
* Certain things that InitializeTerminal were calling themselves
attempted to take the lock. They no longer do so.
* TermControlAutomationPeer cannot take the read lock, because setting
the scrollbar's `Maximum` during `InitializeTerminal` will trigger
vivification of the automation peer tree; if it attempts to take the
lock it will deadlock during initialization.
* `BlinkCursor` was renamed to `CursorTimerTick` because it's the "Tick"
handler for the "CursorTimer".
* `DragDropHandler` was converted into a coroutine instead of just
_calling_ a coroutine.
Caveats:
Terminal may not have a `_buffer` until InitializeTerminal happens.
There's a nasty coupling between RenderTarget and TextBuffer that means
that we need to have a renderer before we have a buffer.
There's a second nasty coupling between RenderThread and Renderer: we
can't create a RenderThread during construction because it needs to be
given a renderer, and we can't create a Renderer during construction
because it needs a RenderThread. We don't want to kick off a thread
during construction.
Testing:
I wailed on this by opening and closing and resizing terminals and panes
and tabs, up to a hundred open tabs and one tab with 51 panes. I set one
tab to update the title as fast as it possibly could and tested
teardown, zoom, resize, mouse movement, etc. while this was all
happening.
Closes#4613.
This commit adds a debugging feature that can be activated by holding
down Left Alt _and_ Right Alt when a new tab is being created, if you
have the global setting "debugFeatures" set to true. That global setting
will default to true in DEBUG builds.
That debugging feature takes the form of a split pane that shows the raw
VT sequences being written to and received from the connection.
When those buttons are held down, every connection that's created as
part of a new tab is wrapped and split into _two_ connections: one to
capture input (and stand in for the main connection) and one to capture
output (and be displayed off to the side)
Closes#3206
Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp cba60cafaadfcc7890a45dea3e1a24412c3d0ec6
Related work items: MSFT:25631386
This PR has evolved to encapsulate two related fixes that I can't really
untie anymore.
#2455 - Duplicating a tab that doesn't exist anymore
This was the bug I was originally fixing in #4429.
When the user tries to `duplicateTab` with a profile that doesn't exist
anymore (like might happen after a settings reload), don't crash.
As I was going about adding tests for this, got blocked by the fact that
the Terminal couldn't open _any_ panes while the `TerminalPage` was size
0x0. This had two theoretical solutions:
* Fake the `TerminalPage` into thinking it had a real size in the test -
probably possible, though I'm unsure how it would work in practice.
* Change `Pane`s to not require an `ActualWidth`, `ActualHeight` on
initialization.
Fortuately, the second option was something else that was already on my
backlog of bugs.
#4618 - `wt` command-line can't consistently parse more than one arg
Presently, the Terminal just arbitrarily dispatches a bunch of handlers
to try and handle all the commands provided on the commandline. That's
lead to a bunch of reports that not all the commands will always get
executed, nor will they all get executed in the same order.
This PR also changes the `TerminalPage` to be able to dispatch all the
commands sequentially, all at once in the startup. No longer will there
be a hot second where the commands seem to execute themselves in from of
the user - they'll all happen behind the scenes on startup.
This involved a couple other changes areound the `TerminalPage`
* I had to make sure that panes could be opened at a 0x0 size. Now they
use a star sizing based off the percentage of the parent they're
supposed to consume, so that when the parent _does_ get laid out,
they'll take the appropriate size of that parent.
* I had to do some math ahead of time to try and calculate what a
`SplitState::Automatic` would be evaluated as, despite the fact that
we don't actually know how big the pane will be.
* I had to ensure that `focus-tab` commands appropriately mark a single
tab as focused while we're in startup, without roundtripping to the
Dispatcher thread and back
## References
#4429 - the original PR for #2455#5047 - a follow-up task from discussion in #4429#4953 - a PR for making panes use star sizing, which was immensly
helpful for this PR.
## Detailed Description of the Pull Request / Additional comments
`CascadiaSettings::BuildSettings` can throw if the GUID doesn't exist.
This wraps those calls up with a try/catch.
It also adds a couple tests - a few `SettingsTests` for try/catching
this state. It also adds a XAML-y test in `TabTests` that creates a
`TerminalPage` and then performs som UI-like actions on it. This test
required a minor change to how we generate the new tab dropdown - in the
tests, `Application::Current()` is _not_ a `TerminalApp::App`, so it
doesn't have a `Logic()` to query. So wrap that in a try/catch as well.
While working on these tests, I found that we'd crash pretty agressively
for mysterious reasons if the TestHostApp became focused while the test
was running. This was due to a call in
`TSFInputControl::NotifyFocusEnter` that would callback to
`TSFInputControl::_layoutRequested`, which would crash on setting the
`MaxSize` of the canvas to a negative value. This PR includes a hotfix
for that bug as well.
## Validation Steps Performed
* Manual testing with a _lot_ of commands in a commandline
* run the tests
* Team tested in selfhost
Closes#2455Closes#4618
This repository tends to use `/`s in branch names.
Unfortunately, `branch: "*"` at present only matches a single
level, which means it would match a branch named `foo` but not `bar/foo`.
Given that I don't think this repository is actively using tags,
and given that the general cost for the spell checker isn't particularly
high, it's better to remove the filtering so that all branches get
checked.
Worst case, a branch that is also tagged and has spelling errors
will get two comments complaining about those spelling errors.
This is just some minor whitelisting/additions to dictionaries to catch
up between when the spell checker PR was written and when it was finally
merged.
This is basically taking the spelling output from
499f24a29e and putting it into files.
The choice of files is arbitrary. I'm adding a `math.txt` dictionary
because it's a reasonable example.
The goal here is to get master to a green check mark
## Validation
When I pushed this commit to my fork, the spell check action ran and
gave me a check mark: https://github.com/jsoref/terminal/runs/534783276
## Summary of the Pull Request
Changes default font from Consolas to Cascadia Code.
## PR Checklist
* [x] Closes#4943
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
I deleted my profiles.json and built from source. All profiles appeared in Cascadia Code.
This commit rewrites selection handling at the TermControl layer.
Previously, we were keeping track of a number of redundant variables
that were easy to get out of sync.
The new selection model is as follows:
* A single left click will always begin a _pending_ selection operation
* A single left click will always clear a selection (#4477)
* A double left click will always begin a word selection
* A triple left click will always begin a line selection
* A selection will only truly start when the cursor moves a quarter of
the smallest dimension of a cell (usually its width) in any direction
_This eliminates the selection of a single cell on one click._
(#4282, #5082)
* We now keep track of whether the selection has been "copied", or
"updated" since it was last copied. If an endpoint moves, it is
updated. For copy-on-select, it is only copied if it's updated.
(#4740)
Because of this, we can stop tracking the position of the focus-raising
click, and whether it was part of click-drag operation. All clicks can
_become_ part of a click-drag operation if the user drags.
We can also eliminate the special handling of single cell selection at
the TerminalCore layer: since TermControl determines when to begin a
selection, TerminalCore no longer needs to know whether copy on select
is enabled _or_ whether the user has started and then backtracked over a
single cell. This is now implicit in TermControl.
Fixes#5082; Fixes#4477
This pull request includes a localization config file that identifies
the modules we need to localize. It also moves us back to the
`Resources\LANGUAGE\Resources.resw` resource layout, but using wildcards
so that the build system can pick up any number of languages.
This commit introduces a github action to check our spelling and fixes
the following misspelled words so that we come up green.
It also renames TfEditSes to TfEditSession, because Ses is not a word.
currently, excerpt, fallthrough, identified, occurred, propagate,
provided, rendered, resetting, separate, succeeded, successfully,
terminal, transferred, adheres, breaks, combining, preceded,
architecture, populated, previous, setter, visible, window, within,
appxmanifest, hyphen, control, offset, powerpoint, suppress, parsing,
prioritized, aforementioned, check in, build, filling, indices, layout,
mapping, trying, scroll, terabyte, vetoes, viewport, whose
This commit replaces `std::vector<bool>` with `dynamic_bitset<>` by
@pinam45 (https://github.com/pinam45/dynamic_bitset) and with
`libpopcnt` for high-performance bit counting by @kimwalisch
(https://github.com/kimwalisch/libpopcnt).
* [x] In support of performance, incremental rendering, and Terminal
"not speed enough" as well as my sanity relative to
`std::vector<bool>`
* [x] Tests updated and passed.
* [x] `LICENSE`, `NOTICE`, and provenance files updated.
* [x] I'm a core contributor. I discussed it with @DHowett-MSFT and
cleared the licensing checks before pulling this in.
## Details `std::vector<bool>` provided by the Microsoft VC Runtime is
incapable of a great many things. Many of the methods you come to expect
off of `std::vector<T>` that are dutifully presented through the `bool`
variant will spontaneously fail at some future date because it decides
you allocated, resized, or manipulated the `vector<bool>` specialization
in an unsupported manner. Half of the methods will straight up not work
for filling/resizing in bulk. And you will tear your hair out as it will
somehow magically forget the assignment of half the bits you gave it
part way through an iteration then assert out and die.
As such, to preserve my sanity, I searched for an alternative. I came
across the self-contained header-only library `dynamic_bitset` by
@pinam45 which appears to do as much of `boost::dynamic_bitset` as I
wanted, but without including 400kg of boost libraries. It also has a
nifty optional dependency on `libpopcnt` by @kimwalisch that will use
processor-specific extensions for rapidly counting bits. @DHowett-MSFT
and I briefly discussed how nice `popcnt` would have been on
`std::vector<bool>` last week... and now we can have it. (To be fair, I
don't believe I'm using it yet... but we'll be able to easily dial in
`til::bitmap` soon and not worry about a performance hit if we do have
to walk bits and count them thanks to `libpopcnt`.)
This PR specifically focuses on swapping the dependencies out and
ingesting the new libraries. We'll further tune `til::bitmap` in future
pulls as necessary.
## Validation
* [x] Ran the automated tests for bitmap.
* [x] Ran the terminal manually and it looks fine still.
## Summary of the Pull Request
This PR fixes an out of bounds access when deleting composition during Chinese IME. What's happening is that we're receiving a CompositionCompleted before receiving the TextUpdate to tell us to delete the last character in the composition. This creates two problems for us:
1. The final character gets sent to the Terminal when it should have been deleted.
2. `_activeTextStart` gets set to `_inputBuffer.length()` when sending the character to the terminal, so when the `TextUpdate` comes right after the `CompositionCompleted` event, `_activeTextStart` is out of sync.
This PR fixes the second issue, by updating `_activeTextStart` during a `TextUpdate` in case we run into this issue.
The first issue is trickier to resolve since we assume that if the text server api tells us a composition is completed, we should send what we have. It'll be tracked here: #5110.
At the very least, this PR will let users continue to type in Chinese IME without it breaking, but it will still be annoying to see the first letter of your composition reappear after deleting it.
## PR Checklist
* [x] Closes#5054
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Play around with Chinese IME deleting and composing, and play around with Korean and Japanese IME to see that it still works as expected.
The pattern regex now correctly disallows keybindings consisting of only
modifiers, modifiers not separated by "+", and unknown keys. Certain
shift+numpad combinations are also not allowed.
The description lists allowed key names in tabular format (assuming the
client renders \t correctly).
## Summary of the Pull Request
One of our great contributors already hooked up all the logic for this,
we just needed a theme library that could handle the request.
## PR Checklist
* [x] Fixes#4980
* [x] CLA signed
* [x] Tests added/passed
* [ ] Requires documentation to be updated
## Summary of the Pull Request
ConPty did not set the ENHANCED_KEY flag when generating new input. This change helps detect when it's supposed to do so, and sends it.
## References
[Enhanced Key Documentation](https://docs.microsoft.com/en-us/windows/console/key-event-record-str)
## PR Checklist
* [X] Closes#2397
## Detailed Description of the Pull Request / Additional comments
| KEY_EVENT_RECORD modifiers | VT encodable? | Detectable on the way out? |
|----------------------------|---------------|----------------------------|
| CAPSLOCK_ON | No | No |
| ENHANCED_KEY | No | Yes** |
| LEFT_ALT_PRESSED | Yes* | Yes* |
| LEFT_CTRL_PRESSED | Yes* | Yes* |
| NUMLOCK_ON | No | No |
| RIGHT_ALT_PRESSED | Yes* | Yes* |
| RIGHT_CTRL_PRESSED | Yes* | Yes* |
| SCROLLLOCK_ON | No | No |
| SHIFT_PRESSED | Yes | Yes |
```
* We can detect Alt and Ctrl, but not necessarily which one
** Enhanced Keys are limited to the following:
- off keypad: INS, DEL, HOME, END, PAGE UP, PAGE DOWN, direction keys
- on keypad: / and ENTER
Since we can't detect the keypad keys, those will _not_ send the ENHANCED_KEY modifier.
For the following CSI action codes, we can assume that they are Enhanced Keys:
case CsiActionCodes::ArrowUp:
case CsiActionCodes::ArrowDown:
case CsiActionCodes::ArrowRight:
case CsiActionCodes::ArrowLeft:
case CsiActionCodes::Home:
case CsiActionCodes::End:
case CsiActionCodes::CSI_F1:
case CsiActionCodes::CSI_F3:
case CsiActionCodes::CSI_F2:
case CsiActionCodes::CSI_F4:
These cases are handled in ActionCsiDispatch
```
## Validation Steps Performed
Followed bug repro steps. It now matches!
## Summary of the Pull Request
- Added better wide glyph support for UIA. We used to move one _cell_ at a time, so wide glyphs would be read twice.
- Converted a few things to use til::point since I'm already here.
- fixed telemetry for UIA
## PR Checklist
* [x] Closes#1354
## Detailed Description of the Pull Request / Additional comments
The text buffer has a concept of word boundaries, so it makes sense to have a concept of glyph boundaries too.
_start and _end in UiaTextRange are now til::point
## Validation Steps Performed
Verified using Narrator
This commit upgrades C++/WinRT to 2.0.200316.3 and fixes a couple of the
transitive dependency issues we had in the process.
Because the latest version has better dependency resolution, we're able
to properly depend on Microsoft.UI.Xaml and the Toolkit in TerminalApp
and TerminalAppLib so we no longer need to manually include .dll and
.pri files.
Because of nebulous _other_ changes in dependency resolution,
WindowsTerminalUniversal isn't picking up transitive .winmd dependencies
from TerminalApp, and needs to include them as ProjectReferences
directly. This was already happening transitively, so now it's explicit.
I've also taken the time to upgrade GSL to v2.1.0, the last release
before they removed span::at and blew up our world.
## Summary of the Pull Request
When I did my last PR that was merged, the PR #4960, there were two more cases I forgot to include, so I included them here, for the sake of consistency and completion
## References
PR #4690
## PR Checklist
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [X] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
Replacing pointer casts to 0 with nullptr in two tests.
## Validation Steps Performed
Manual Testing
Automated Testing
## Summary of the Pull Request
Moves the ConPTY drawing mechanism (`VtRenderer`) to use the fine-grained `til::bitmap` individual-dirty-bit tracking mechanism instead of coarse-grained rectangle unions to improve drawing performance by dramatically reducing the total area redrawn.
## PR Checklist
* [x] Part of #778 and #1064
* [x] I work here
* [x] Tests added and updated.
* [x] I'm a core contributor
## Detailed Description of the Pull Request / Additional comments
- Converted `GetDirtyArea()` interface from `IRenderEngine` to use a vector of `til::rectangle` instead of the `SMALL_RECT` to banhammer inclusive rectangles.
- `VtEngine` now holds and operates on the `til::bitmap` for invalidation regions. All invalidation operation functions that used to be embedded inside `VtEngine` are deleted in favor of using the ones in `til::bitmap`.
- Updated `VtEngine` tracing to use new `til::bitmap` on trace and the new `to_string()` methods detailed below.
- Comparison operators for `til::bitmap` and complementary tests.
- Fixed an issue where the dirty rectangle shortcut in `til::bitmap` was set to 0,0,0,0 by default which means that `|=` on it with each `set()` operation was stretching the rectangle from 0,0. Now it's a `std::optional` so it has no value after just being cleared and will build from whatever the first invalidated rectangle is. Complementary tests added.
- Optional run caching for `til::bitmap` in the `runs()` method since both VT and DX renderers will likely want to generate the set of runs at the beginning of a frame and refer to them over and over through that frame. Saves the iteration and creation and caches inside `til::bitmap` where the chance of invalidation of the underlying data is known best. It is still possible to iterate manually with `begin()` and `end()` from the outside without caching, if desired. Complementary tests added.
- WEX templates added for `til::bitmap` and used in tests.
- `translate()` method for `til::bitmap` which will slide the dirty points in the direction specified by a `til::point` and optionally back-fill the uncovered area as dirty. Complementary tests added.
- Moves all string generation for `til` types `size`, `point`, `rectangle`, and `some` into a `to_string` method on each object such that it can be used in both ETW tracing scenarios AND in the TAEF templates uniformly. Adds a similar method for `bitmap`.
- Add tagging to `_bitmap_const_iterator` such that it appears as a valid **Input Iterator** to STL collections and can be used in a `std::vector` constructor as a range. Adds and cleans up operators on this iterator to match the theoretical requirements for an **Input Iterator**. Complementary tests added.
- Add loose operators to `til` which will allow some basic math operations (+, -, *, /) between `til::size` and `til::point` and vice versa. Complementary tests added. Complementary tests added.
- Adds operators to `til::rectangle` to allow scaling with basic math operations (+, -, *) versus `til::size` and translation with basic math operations (+, -) against `til::point`. Complementary tests added.
- In-place variants of some operations added to assorted `til` objects. Complementary tests added.
- Update VT tests to compare invalidation against the new map structure instead of raw rectangles where possible.
## Validation Steps Performed
- Wrote additional til Unit Tests for all additional operators and functions added to the project to support this operation
- Updated the existing VT renderer tests
- Ran perf check
## Summary of the Pull Request
If the _Alternate Scroll Mode_ is enabled, the terminal generates up/down keystrokes when the mouse wheel is scrolled. However, the expected escape sequences for those keys are dependent on the state of the _Cursor Keys Mode_ ( `DECCKM`), but we haven't taken that into account. This PR updates the alternate scroll implementation to make sure the appropriate sequences are sent for both `DECCKM` modes.
## References
#3321
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Detailed Description of the Pull Request / Additional comments
I've simply added a condition in the `TerminalInput::_SendAlternateScroll` method to send a different pair of sequences dependent on the state of `_cursorApplicationMode` flag.
## Validation Steps Performed
Manually tested in VIM (although that required me enabling the _Alternate Scroll Mode_ myself first). Also added a new unit test in `MouseInputTest` to confirm the correct sequences were generated for both `DECCKM` modes.
## Summary of the Pull Request
Seriously just read the code on this one, it's so incredibly obvious what I did wrong
## References
Regressed with #4741
## PR Checklist
* [x] Closes#5029
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Currently, if the Terminal attempts to parse a setting that _should_ be a `bool`
and the user provided a string, then we'll throw an exception while parsing the
settings, and display an error message that's pretty unrelated to the actual
problem.
The same goes for `bool`s as `int`s, `float`s as `int`s, etc.
This PR instead updates our settings parsing to ensure that we check the type of
a json value before actually trying to get its parsed value.
## References
## PR Checklist
* [x] Closes#4299
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I made a bunch of `JsonUtils` helpers for this in the same vein as the
`GetOptionalValue` ones.
Notably, any other value type can safely be treated as a string value.
## Validation Steps Performed
* added tests
* ran the Terminal and verified we can parse settings with the wrong types
These projects load Xaml components that have Uids, but those Uids just
weren't working because Xaml components are, by default, loaded in
"Application" scope. Application scope is great if the resource producer
is the EXE project.
Application scope means that resources are looked up at the resource
root, but DLLs with resources don't produce resources at the root. They
produce resources at a root named after the DLL.
Setting the Xaml component resource location to Nested makes sure the
Xaml resource loader loads resources from the right places.
## Summary of the Pull Request
This PR turns on TextWrapping on `TSFInputControl::TextBlock`. Once the TextBlock hits the end of the Terminal window, it will wrap downwards, but the TextBlock will have as much width as it had when composition started. Unfortunately, this means if composition starts right at the end of the Terminal with enough width for just one character, there will be a vertical line of characters down the right side of the Terminal 😅. It's definitely not ideal, and I imagine this won't be the last time we visit this issue, but for now users can see what they're typing.
## PR Checklist
* [x] Closes#3657
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Played around with IME towards the edge of the Terminal window.
The first issue is in the console host: when we erase a command history,
we also clear its _allocated_ flag. It's supposed to remain allocated
but become "reset". When we later check that a command history that
exists in the list is allocated, we fail loudly because allocated has
been cleared.
The second is that in Windows Server 2003, we rewrote the console client
APIs (in kernelbase!) regarding command history and changed one internal
function from taking char** to taking char*. Since the signature was
_actually_ void** and that changed to void*, the compiler didn't notice
when in only one single place we continued to pass a char** instead of a
char*. This caused us to send the wrong filename length for the ExeName
in SetConsoleNumberOfCommands.
Fixes MSFT:25265854
Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp b493fb5a06975c53b2fbb7b9fc0546244b551fa9
Found a bug where the following won't work:
```c++
COORD inclusiveEnd{ _end };
```
where `_end` is a `til::point`.
The only fix for this is to replace these instances with this:
```c++
COORD inclusiveEnd = _end;
```
What was happening in the first notation is the implicit conversion of `til::point` to `bool` to `SHORT`. The constructor for COORD only sees one SHORT so it thinks the value should be the definition for X, and Y should stay as 0. So we end up getting `1, 0`.
By adding the explicit keyword to the bool operators, we prevent the accident above from occurring.
## Summary of the Pull Request
Introduces type `til::bitmap` which implements an NxM grid of bits that can be used to track dirty/clean state on a per-cell basis throughout a rectangle.
## PR Checklist
* [x] In support of Differential Rendering #778
* [X] I work here.
* [x] Tests added/passed
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- Adds `const_iterator` to `til::rectangle` that will walk from top to bottom, left to right every position in the rectangle as a `til::point` and associated test.
- Adds `bool til::rectangle::contains(til::point)` to determine if a point lies within the rectangle and the associated test
- Adds complementary methods to `til::rectangle` of `index_of(til::point)` and `point_at(ptrdiff_t)` which will convert between a valid `point` position that lies inside the `rectangle` and the index as a count of cells from the top left corner (origin) in a top to bottom & left to right counting fashion (and associated tests).
- Adds `til::some<T, N>::clear()` to empty out the contents of the `some` and associated test.
THEN with all that support...
- Adds `til::bitmap` which represents a 2 dimensional grid of boolean/bit flags. This class contains set and reset methods for the entire region, and set only for a single `til::point` or a subregion as specified by a `til::rectangle` (and associated tests.)
- Adds convenience methods of `any()`, `one()`, `none()`, and `all()` to the `til::bitmap` to check some of its state.
- Adds convenience method of `resize()` to `til::bitmap` that will grow or shrink the bitmap, copying whatever is left of the previous one that still fits and optionally filling or blanking the new space.
- Adds a `const_iterator` for `til::bitmap` that will walk top to bottom, left to right and return a `til::rectangle` representing a run of bits that are all on sequentially in a row. Breaks per row. Exactly as we expect to be drawing things (and associated tests.)
## Validation Steps Performed
- See automated tests of functionality.
For some functions, the overriding implementation is set to default, but
the deletion is not explicitly set at all. For those functions, I
changed default to delete
There's an issue in the UAC consent dialog where it cannot read an
application's name if it's stored in a resource. When it fails, it deems
us an "Unknown Program" and that looks pretty silly.
Fixes#2289.
## Summary of the Pull Request
Fixes the <kbd>Ctrl+Num</kbd> keys in both conhost and the Terminal. These keys are supposed to be mapped to specific characters according to [this doc](https://vt100.net/docs/vt220-rm/table3-5.html). Now we actually handle them correctly.
## PR Checklist
* [x] Closes#3507
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* Ran test
* tested in `gnome-terminal` with `showkeys -a`
* tested in conhost with `showkeys -a`
* tested in Windows Terminal with `showkeys -a`
## Summary of the Pull Request
Ctrl+/ and Ctrl-? are complicated in VT input.
* C-/ is supposed to be `^_` (the C0 character US)
* C-? is supposed to be `DEL`
* C-M-/ is supposed to be `^[^_` (ESC US)
* C-M-? is supposed to be `^[^?` (ESC DEL)
The astute reader will note that these characters also share the same key on a
standard en-us keyboard layout, which makes the problem even more complicated.
This PR does a better job of handling these weird cases.
# References
* #3079 - At first, I thought this PR would close this issue, but as I've learned below, this won't solve that one. This bug was merely found during that investigation.
## PR Checklist
* [x] Related to #3079
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
* checked `showkey -a` in gnome-terminal, which gives you the wrong results for C-M-/, C-M-?
* checked `showkey -a` in xterm, which gives you the _right_ results for C-M-/, C-M-?
* checked `showkey -a` in conhost
* checked `showkey -a` in Windows Terminal
## Summary of the Pull Request
This is 100% on me. Even after mucking around in this function for the last 3
months, I missed that there was a single addition where we weren't doing a
clamped addition. This would lead to us creating a buffer with negative height,
and all sorts of badness.
Clamping this addition was enough to fix the bug.
## PR Checklist
* [x] Closes#2815
* [x] Closes#4972
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
* ran tests
* Created a profile with `"historySize" : 32728`, then filled the viewport with
text, then maximized, and saw that the viewport indeed did resize to the new
size of the window.
## Summary of the Pull Request
Block selections were always read and displayed as line selections in UIA. This fixes that.
## PR Checklist
* [x] Closes#4509
## Detailed Description of the Pull Request / Additional comments
1. Expose `IsBlockSelection()` via IUiaData
2. Update the constructor to be able to take in a block selection parameter
3. Make ScreenInfoUiaProviders pass step 1 output into step 2 constructor
4. Update all instances of `UiaTextRange::GetTextRects()` to include this new flag
## Validation Steps Performed
Manually tested.
Additional tests would be redundant as GetTextRects() is tested in the text buffer.
When we painted spaces up until the character right before the right
edge of the screen, we would erroneously use Erase in Line instead of
Erase Character due to an off-by-one.
Fixes#4727
## Summary of the Pull Request
This notifies automation clients (i.e.: NVDA, narrator, etc...) of new output being rendered to the screen.
## References
Close#2447 - Signaling for new output and cursor
Close#3791 - fixed by signaling cursor changes
## Detailed Description of the Pull Request / Additional comments
- Added tracing for UiaRenderer. This makes it easier to debug issues with notifying an automation client.
- Fire TextChanged automation events when new content is output to the screen.
## Validation Steps Performed
Verified with NVDA [1]
## Narrator
Narrator works _better_, but is unable to detect new output consistently. There is no harm for narrator when this change goes in.
[1] https://github.com/microsoft/terminal/issues/2447#issuecomment-595879890
## Summary of the Pull Request
Alt-Numpad# input would be escaping each numkey before sending it through. This would result in some weird behavior, for example, in powershell, where the first alt-numpad# would start digit argument and once the user releases alt, a character is sent through and digit argument would repeat that character X times. To resolve this, we simply need to ignore KeyDowns where Alt is held and a Numpad# is pressed.
Once Alt is released, we'll receive a character through `TSFInputControl`, not `TermControl::CharacterHandler`. It seems that the `CoreTextEditContext` in `TSFInputControl` intercepts the character before it gets to `TermControl`. TSF will then send the received character through as normal.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#1401
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Testing various combinations of Alt-Numpad# consistently sends through only one instance of the expected symbols.
## Summary of the Pull Request
We (the royal "we") broke key unbinding in #4746. We didn't run the local tests after this, which actually would have caught this. The comment even suggests what we should have done here. We need to make sure that when we bail, it's because there's a parsing function that returned nothing. `null`, `"unbound"`, etc actually don't even have a parsing function at all, so they should just keep on keepin' on.
## References
Source of this regression: #4746
## PR Checklist
* [x] Closes#3729
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is a great example of why your unittests should run in CI always
## Validation Steps Performed
* **ran the tests**
* tested the following unbindings:
```json
{ "command": null, "keys": [ "ctrl+shift+t" ] },
{ "command": "unbound", "keys": [ "ctrl+shift+t" ] },
{ "command": "null", "keys": [ "ctrl+shift+t" ] },
```
and they each individually worked.
Add the option to set the cursor color as part of the color scheme.
This is very useful for light themes, where the cursor disappears unless its color
is set in the profile.
Related to issue #764, but doesn't fully resolve it.
## Validation
I tested this manually by creating a light color scheme, setting the cursor color
to black and setting the profile color scheme to the newly created color scheme.
I validated the cursor is black, then set the cursor color in the profile (to red)
and saw it trumps the cursor color from the color scheme.
In IInputEvent, there are two for loops. One is a range based loop operating on "records", and the other is a classic for-loop doing the same. For consistency, the for-loop was changed into the more modern variation via a compiler refactoring, which has the exact same behavior as the other for-loop in the main function.
Yes, of course this was tested manually and with the unit tests.
# Validation Steps
Unit testing passed. In addition, for the manual validation tests, I compared the output for sample values between the two loops ensuring the same results.
## Summary of the Pull Request
Most of the methods in the `ITermDispatch` interface have a comment following them that indicates the VT function that they implement. These comments are then used by the script in PR #1884 to generate a table of supported VT functions. This PR updates some of those comments, to more accurately reflect the functions that are actually supported.
## References
PR #1884
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed.
* [x] No new tests.
* [x] No new docs.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #1884
## Detailed Description of the Pull Request / Additional comments
In some cases there are methods that implement multiple VT functions which are essentially aliases. Originally the comments listed only one of the functions, so I've now updated them to list both. This includes `HPA` as an alias of `CHA`, and `HVP` as an alias of `CUP`.
Similarly, some control characters are implemented in terms of another VT function, but only the main function was listed in the comment. Again I've now updated the comments to list both the main function and any related control characters. This includes `BS` (sharing the same method as `CUB`), `HT` (the same method as `CHT`), and `LF`, `FF`, and `VT` (the same method as `IND` and `NEL`).
Then there were some minor corrections. The `DeviceAttributes` method was commented as `DA`, but it really should be `DA1`. `DesignateCharset` was simply commented as _DesignateCharset_, when it should be `SCS`. The `DECSCNM` comment was missing a space, so it wasn't picked up by the script. And the `SetColumns` comment mistakenly included `DECSCPP`, but we don't actually support that.
Finally there is the `DeviceStatusReport` method, which potentially covers a wide range of different reports. But for now we only support the _Cursor Position Report_, so I've commented it as `DSR, DSR-CPR` to more clearly indicate our level of support. In the long term we'll probably need a better way of handling these reports though.
## Validation Steps Performed
I've run the script from PR #1884 and confirmed that the output is now a more accurate reflection of our actual VT support.
Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 5b3acd8b5bac38da02fc86a29c81dfd252e79d1f
Related work items: MSFT:25505535
When WSL.exe would hang for users, WslDistroGenerator would also hang
while waiting for its `wsl.exe --list` call to return. The timeout was
`INFINITE` in the `WaitForSingleObject` call, but we should slap a
timeout on it instead (here we choose 2 seconds). In addition, if it
times out, we should also just return profiles and let the Terminal
continue to start up without the WSL distro profiles loaded.
# Validation Steps Performed
Made a sleep 30 executable as the command instead, made sure it hit the
`WAIT_TIMEOUT` and continued to start up without loading my Ubuntu
profile.
Closes#3987
## Summary of the Pull Request
This PR ensures that Conpty properly treats `^[^Z` and `^[^X` as
<kbd>Ctrl+Alt+z</kbd> and <kbd>Ctrl+Alt+x</kbd>, instead of <kbd>Ctrl+z</kbd>
and <kbd>Ctrl+x</kbd>.
## References
## PR Checklist
* [x] Closes#4201
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
`^Z` and `^X` are special control characters, SUB and CAN. For the output state
machine, these characters are supposed to be executed from _any_ state. However,
we shouldn't do this for the input engine. With the current behavior, these
characters are immediately executed regardless of what state we're in. That
means we end up synthesizing <kbd>Ctrl+z/x</kbd> for these characters. However,
for the InputStateMachine engine, when these characters are preceeded by `^[`
(ESC), we want to treat them as <kbd>Ctrl+Alt+z/x</kbd>.
This just adds a check in `StateMachine` to see if we should immediately execute
these characters from any state, similar to many of the other exceptions we
already perform in the StateMachine for the input engine.
## Validation Steps Performed
* ran tests
* checked `showkey -a` in gnome-terminal
* checked `showkey -a` in conhost
* checked `showkey -a` in vt pipeterm (conhost as a conpty terminal)
* checked `showkey -a` in Windows Terminal
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Always use the system's locale to render text to ensure the correct font variants are used.
`_ResolveFontFaceWithFallback()` overrides the last argument with the locale name of the font, but users normally configure fonts with latin alphabet only and use font linking to display non-latin characters, which causes the the locale names of the latin fonts are used to render the non-latin fonts. https://github.com/microsoft/terminal/issues/4508#issuecomment-598552472
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4508
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation
On a zh-hans system, simplified Chinese hans are used after this patch (above), versus Japanese hans before (below).
## Summary of the Pull Request
This _actually_ implements `\033c`
([RIS](https://vt100.net/docs/vt220-rm/chapter4.html)) for the Windows Terminal.
I thought I had done this in #4433, but that PR actually only passthrough'd
`\x1b[3J`. I didn't realize at the time that #2715 was mostly about hard reset,
not erase scrollback.
Not only should conpty pass through RIS, but the Terminal should also be
prepared to actually handle that sequence. So this PR adds that support as well.
## References
* #4433: original PR I thought fixed this.
## PR Checklist
* [x] Closes#2715 for real this time
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Actually tested `printf \033c` in the Terminal this time
## Summary of the Pull Request
Currently, when the user resizes the Terminal, we'll snap the visible viewport back to the bottom of the buffer. This PR changes the visible viewport of the Terminal to instead remain in the same relative location it was before the resize.
## References
Made possible by our sponsors at #4741, and listeners like you.
## PR Checklist
* [x] Closes#3494
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
We already hated the `std::optional<short>&` thing I yeet'd into #4741 right at the end to replace a `short*`. So I was already going to change that to a `std::optional<std::reference_wrapper<short>>`, which is more idomatic. But then I was looking through the list of bugs and #3494 caught my eye. I realized it would be trivial to not only track the top of the `mutableViewport` during a resize, but we could use the same code path to track the _visible_ viewport's start as well.
So basically I'm re-using that bit of code in `Reflow` to calculate the visible viewport's position too.
## Validation Steps Performed
Gotta love just resizing things all day, errday
## Summary of the Pull Request
Introduces convenience type `til::rectangle` which automatically implements our best practices for rectangle-related types and provides automatic conversions in/out of the relevant types.
## PR Checklist
* [x] In support of Differential Rendering #778
* [X] I work here.
* [x] Tests added/passed
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- Automatically converts in from anything with a Left/Top/Right/Bottom or left/top/right/bottom (Win32 `RECT`)
- Automatically converts Console type `SMALL_RECT` and shifts it from **inclusive** to **exclusive** on instantiation
- Automatically converts out to `SMALL_RECT` (converting back to **inclusive**), `RECT`, or `D2D1_RECT_F`.
- Constructs from bare integers written into source file
- Constructs from a single `til::point` as a 1x1 size rectangle with top-left corner (origin) at that point
- Constructs from a single `til::size` as a WxH size rectangle with top-left corner (origin) at 0,0
- Constructs from a `til::point` and a `til::size` representing the top-left corner and the width by height.
- Constructs from a `til::point` and another `til::point` representing the top-left corner and the **exclusive** bottom-right corner.
- Default constructs to empty
- Uses Chromium numerics for all basic math operations (+, -, *, /)
- Provides equality tests
- Provides `operator bool` to know when it's valid (has an area > 0) and `empty()` to know the contrary
- Accessors for left/top/right/bottom
- Type converting accessors (that use safe conversions and throw) for left/top/right/bottom
- Convenience methods for finding width/height (with Chromium numerics operations) and type-converting templates (with Chromium numerics conversions).
- Accessors for origin (top-left point) and the size/dimensions (as a `til::size`).
- Intersect operation on `operator &` to find where two `til::rectangle`s overlap, returned as a `til::rectangle`.
- Union operation on `operator |` to find the total area covered by two `til::rectangles`, returned as a `til::rectangle`.
- Subtract operation on `operator -` to find the area remaining after one `til::rectangle` is removed from another, returned as a `til::some<til::rectangle, 4>`.
- TAEF/WEX Output and Comparators so they will print very nicely with `VERIFY` and `Log` macros in our testing suite.
- Additional comparators, TAEF/WEX output, and tests written on `til::some` to support the Subtract operation.
- A natvis
## Validation Steps Performed
- See automated tests of functionality.
## Summary of the Pull Request
When the auto-hide taskbar setting is enabled, then we don't
always get another window message to trigger us to remove the drag bar.
So, make sure to update the size of the drag region here, so that it
_definitely_ goes away.
## References
## PR Checklist
* [x] Closes#4224
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Manually tested it
Adds support for setting the cursor visibility in Terminal. Visibility
is a property entirely independent from whether the cursor is "on" or
not. The cursor blinker _should_ change the "IsOn" property. It was
actually changing the "Visible" property, which was incorrect. This PR
additionally corrects the naming of the method used by the cursor
blinker, and makes it do the right thing.
I added a pair of tests, one taken straight from conhost. In
copy-pasting that test, I took it a step further and implemented
`^[[?12h`, `^[[?12l`, which enables/disables cursor blinking, for the
`TerminalCore`. THIS DOES NOT ADD SUPPORT FOR DISABLING BLINKING IN THE
APP. Conpty doesn't emit the blinking on/off sequences quite yet, but
when it _does_, the Terminal will be ready.
## References
* I'd bet this conflicts with #2892
* This isn't a solution for #1379
* There shockingly isn't an issue for cursor blink state via conpty...?
## PR Checklist
* [x] Closes#3093
* [x] Closes#3499
* [x] Closes#4644
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
This changes the renederer to make sure to not draw the cursor when it is placed outside the viewport. When the window height isn't an exact multiple of a row's height, then there's a little bit of space below the last line we're actually drawing. If cursor is on the line below the viewport, then it can actually get drawn into this space. Since we're not drawing the text for that line, this is a little odd.
This PR fixes the issue by simply ensuring the cursor is in the veiwport before we draw it.
## References
## PR Checklist
* [x] Closes#3166
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
Checked with the GDI renderer as well as the DX renderer in conhost to make sure this is fixed for both of them, as well as the Terminal
cmatrix is somewhat of a pathological case for our infrastructure: it
prints out a bunch of green and white characters and then updates them a
million times a second.
It also maintains a column of space between every green character. When
it prints this column, it prints it in "default" or "white". This ends
up making runs of text that look like this:
(def: G=green B=bright white W=white *=matrix char =space)
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
G W G W G W G W G W G W G W G W
As characters trickle in:
G*W G*W G*W G*W G*W G*W G*W B*W
G*W G*W G*W G*W G*W G*W G*W G W
G*W G*W G*W B*W G*W G*W G*W G W
G*W B*W G*W G W G*W G*W G*W G*W
G*W G W G*W G W G*W B*W G*W G*W
B*W G W G*W G W G*W G W B*W G*W
G W G W G*W G W G*W G W G W B*W
G W G W B*W G W G*W G W G W G W
Every one of those color transitions causes us to break up the run of
text and start rendering it again. This impacts GDI, Direct2D *and*
ConPTY. In the example above, there are 120 runs.
The problem is, printing a space doesn't **use** the foreground color!
This commit introduces an optimization. When we're about to break a text
cluster because its attributes changed, we make sure that it's not just
filled with spaces and doesn't differ in any visually-meaningful way
(like underline or strikethrough, considering global invert state).
This lets us optimize both the rendering _and_ the PTY output to look
like this:
G* * * * * * * B*G
G* * * * * * *
G* * * B*G * * *
G* B*G * * * * *
G* * * B*G * *
B*G * * B*G *
G * * B*G
G B*G *
Text will be printed at best line-by-line and at worst only when the
visible properties of the screen actually change. In the example
above, there are only 21 runs.
This speeds up cmatrix remarkably.
Refs #1064
## Summary of the Pull Request
Make TerminalControl synthesize mouse events and Terminal send them to
the TerminalInput's MouseInput module.
The implementation here takes significant inspiration from how we handle
KeyEvents.
## References
Closes#545 - VT Mouse Mode (Terminal)
References #376 - VT Mouse Mode (ConPty)
### TerminalControl
- `_TrySendMouseEvent` attempts to send a mouse event via TermInput.
Similar to `_TrySendKeyEvent`
- Use the above function to try and send the mouse event _before_
deciding to modify the selection
### TerminalApi
- Hookup (re)setting the various modes to handle VT Input
- Terminal is _always_ in VT Input mode (important for #4856)
### TerminalDispatch
- Hookup (re)setting the various modes to handle VT Input
### TerminalInput
- Convert the mouse input position from viewport position to buffer
position
- Then send it over to the MouseInput in TerminalInput to actually do it
(#4848)
## Validation Steps Performed
Tests should still pass.
This PR adds support for "Resize with Reflow" to the Terminal. In
conhost, `ResizeWithReflow` is the function that's responsible for
reflowing wrapped lines of text as the buffer gets resized. Now that
#4415 has merged, we can also implement this in the Terminal. Now, when
the Terminal is resized, it will reflow the lines of it's buffer in the
same way that conhost does. This means, the terminal will no longer chop
off the ends of lines as the buffer is too small to represent them.
As a happy side effect of this PR, it also fixed#3490. This was a bug
that plagued me during the investigation into this functionality. The
original #3490 PR, #4354, tried to fix this bug with some heavy conpty
changes. Turns out, that only made things worse, and far more
complicated. When I really got to thinking about it, I realized "conhost
can handle this right, why can't the Terminal?". Turns out, by adding
resize with reflow, I was also able to fix this at the same time.
Conhost does a little bit of math after reflowing to attempt to keep the
viewport in the same relative place after a reflow. By re-using that
logic in the Terminal, I was able to fix#3490.
I also included that big ole test from #3490, because everyone likes
adding 60 test cases in a PR.
## References
* #4200 - this scenario
* #405/#4415 - conpty emits wrapped lines, which was needed for this PR
* #4403 - delayed EOL wrapping via conpty, which was also needed for
this
* #4354 - we don't speak of this PR anymore
## PR Checklist
* [x] Closes#1465
* [x] Closes#3490
* [x] Closes#4771
* [x] Tests added/passed
## EDIT: Changes to this PR on 5 March 2020
I learned more since my original version of this PR. I wrote that in
January, and despite my notes that say it was totally working, it
_really_ wasn't.
Part of the hard problem, as mentioned in #3490, is that the Terminal
might request a resize to (W, H-1), and while conpty is preparing that
frame, or before the terminal has received that frame, the Terminal
resizes to (W, H-2). Now, there aren't enough lines in the terminal
buffer to catch all the lines that conpty is about to emit. When that
happens, lines get duplicated in the buffer. From a UX perspective, this
certainly looks a lot worse than a couple lost lines. It looks like
utter chaos.
So I've introduced a new mode to conpty to try and counteract this
behavior. This behavior I'm calling "quirky resize". The **TL;DR** of
quirky resize mode is that conpty won't emit the entire buffer on a
resize, and will trust that the terminal is prepared to reflow it's
buffer on it's own.
This will enable the quirky resize behavior for applications that are
prepared for it. The "quirky resize" is "don't `InvalidateAll` when the
terminal resizes". This is added as a quirk as to not regress other
terminal applications that aren't prepared for this behavior
(gnome-terminal, conhost in particular). For those kinds of terminals,
when the buffer is resized, it's just going to lose lines. That's what
currently happens for them.
When the quirk is enabled, conpty won't repaint the entire buffer. This
gets around the "duplicated lines" issue that requesting multiple
resizes in a row can cause. However, for these terminals that are
unprepared, the conpty cursor might end up in the wrong position after a
quirky resize.
The case in point is maximizing the terminal. For maximizing
(height->50) from a buffer that's 30 lines tall, with the cursor on
y=30, this is what happens:
* With the quirk disabled, conpty reprints the entire buffer. This is
60 lines that get printed. This ends up blowing away about 20 lines
of scrollback history, as the terminal app would have tried to keep
the text pinned to the bottom of the window. The term. app moved the
viewport up 20 lines, and then the 50 lines of conpty output (30
lines of text, and 20 blank lines at the bottom) overwrote the lines
from the scrollback. This is bad, but not immediately obvious, and
is **what currently happens**.
* With the quirk enabled, conpty doesn't emit any lines, but the
actual content of the window is still only in the top 30 lines.
However, the terminal app has still moved 20 lines down from the
scrollback back into the viewport. So the terminal's cursor is at
y=50 now, but conpty's is at 30. This means that the terminal and
conpty are out of sync, and there's not a good way of re-syncing
these. It's very possible (trivial in `powershell`) that the new
output will jump up to y=30 override the existing output in the
terminal buffer.
The Windows Terminal is already prepared for this quirky behavior, so it
doesn't keep the output at the bottom of the window. It shifts it's
viewport down to match what conpty things the buffer looks like.
What happens when we have passthrough mode and WT is like "I would like
quirky resize"? I guess things will just work fine, cause there won't be
a buffer behind the passthrough app that the terminal cares about. Sure,
in the passthrough case the Terminal could _not_ quirky resize, but the
quirky resize won't be wrong.
## Summary of the Pull Request
Introduces convenience type `til::point` which automatically implements our best practices for point-related types and provides automatic conversions in/out of the relevant types.
## PR Checklist
* [x] In support of Differential Rendering #778
* [X] I work here.
* [x] Tests added/passed
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- Automatically converts in from anything with a X/Y (console `COORD`) or x/y (Win32 `POINT`)
- Automatically converts out to `COORD`, `POINT`, or `D2D1_POINT_2F`.
- Constructs from bare integers written into source file
- Default constructs to empty
- Uses Chromium Math for all basic math operations (+, -, *, /)
- Provides equality tests
- Accessors for x/y
- Type converting accessors (that use safe conversions and throw) for x/y
- TAEF/WEX Output and Comparators so they will print very nicely with `VERIFY` and `Log` macros in our testing suite.
- A natvis
## Validation Steps Performed
- See automated tests of functionality.
When ConPTY encounters a string we don't understand, immediately flush the frame.
## References
This PR supersedes #2665. This solution is much simpler than what was proposed in that PR.
As mentioned in #2665: "This might have some long-term consequences for #1173."
## PR Checklist
* [x] Closes#2011
* [x] Closes#4106
* [x] I work here
* [x] Tests added/passed
## Summary of the Pull Request
Move the contents and functionality of MouseInput from TerminalAdapter
to TerminalInput.
## References
#545 - VT Mouse Mode (Terminal)
#376 - VT Mouse Mode (ConPty)
## Detailed Description of the Pull Request / Additional comments
Pretty straightforward. The MouseInput class was a bit large though so I
split it up into a few files. This should make TerminalInput a bit
easier to manage.
- `mouseInputState`: enable some of the modes for mouse input. All saved
to `_mouseInputState`.
- `mouseInput`: basically just `HandleMouse()` and any helper functions
## Validation Steps Performed
Tests should still pass.
When we had to flush unknown sequences to the terminal, we were only
taking the _most recent run_ with us; therefore, if we received `\e[?12`
and `34h` in separate packets we would _only_ send out `34h`.
This change fixes that issue by ensuring that we cache partial bits of
sequences we haven't yet completed, just in case we need to flush them.
Fixes#3080.
Fixes#3081.
## Summary of the Pull Request
Allows VT engine methods that print formatted strings (cursor movements, color changes, etc.) to provide a guess at the max buffer size required eliminating the double-call for formatting in the common case.
## PR Checklist
* [x] Found while working on #778
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- The most common case for VT rendering is formatting a few numbers into a sequence. For the most part, we can already tell the maximum length that the string could be based on the number of substitutions and the size of the parameters.
- The existing formatting method would always double-call. It would first call for how long the string was going to be post-formatting, allocate that memory, then call again and fill it up. This cost two full times of running through the string to find a length we probably already knew for the most part.
- Now if a size is provided, we allocate that first and attempt the "second pass" of formatting directly into the buffer. This saves the count step in the common case.
- If this fails, we fall back and do the two-pass method (which theoretically means the bad case is now 3 passes.)
- The next biggest waste of time in this method was allocating and freeing strings for every format pass. Due to the nature of the VT renderer, many things need to be formatted this way. I've now instead moved the format method to hold a static string that really only grows over the course of the session for all of these format operations. I expect a majority of the time, it will only be consuming approximately 5-15 length of a std::string of memory space. I cannot currently see a circumstance where it would use more than that, but I'm consciously trading memory usage when running as a PTY for overall runtime performance here.
## Validation Steps Performed
- Ran the thing manually and checked it out with wsl and cmatrix and Powershell and such attached to Terminal
- Wrote and ran automated tests on formatting method
## Summary of the Pull Request
This fixes our calculation for the initial size of the window. WE weren't accounting for the height of the tabs, so the `initialRows` was consistently wrong.
## PR Checklist
* [x] Closes#2061
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
For the tabs below the titlebar case, there's 6px (unscaled) of space that I cannot account for. I seriously have no idea where it's coming from. When we end up creating the first `TermControl` after startup, there's an inexplicable `6*scale` difference between the height of the `tabContent` and the `SwapChainPanel`'s size.
## Validation Steps Performed
Checked all six of the following cases:
* 1.0 DPI scaling, Tabs in Titlebar
* 1.25 DPI scaling, Tabs in Titlebar
* 1.0 DPI scaling, Tabs NOT in Titlebar, always show tabs
* 1.0 DPI scaling, Tabs NOT in Titlebar, DON'T always show tabs
* 1.25 DPI scaling, Tabs NOT in Titlebar, always show tabs
* 1.25 DPI scaling, Tabs NOT in Titlebar, DON'T always show tabs
If UseAcrylic is disabled, CTRL+SHIFT+SCROLL would enable it, without
having to change the setting in profile.json manually.
1. Set "useAcrylic" to false for the any profile in profile.json
2. Open terminal window for that profile.
3. CTRL+SHIFT+MouseScroll
Acrylic background opacity should change according to mouse scroll
## PR Checklist
* [x] CLA signed.
* [x] Tested manually
* [x] Updated documentation
Closes#661
There's a platform limitation that causes us to crash when we rearrange
tabs. Xaml tries to send a drag visual (to wit: a screenshot) to the
drag hosting process, but that process is running at a different IL than
us.
For now, we're disabling elevated drag.
Fixes#3581
This commit enables passthrough mode for VT Input Mode in ConPty. This
will be used to pass VT Input from Mouse Mode directly to the app on the
other side.
## References
#545 - VT Mouse Mode (Terminal)
#376 - VT Mouse Mode (ConPty)
## Detailed Description of the Pull Request / Additional comments
### ConHost
- Set the callback for the InputEngine.
- Retrieve `IsInVirtualTerminalInputMode` from the InputBuffer
### Adapter (Dispatch)
Retrieve `VTInputMode` setting from ConHost
### Parser
- Add a callback to passthrough unknown input sequences directly to the
input queue.
- If we're in VTInputMode, use the callback
## Validation Steps Performed
Tests should still pass.
I noticed a crash in debug builds when a connected application terminates;
we get its exit code, then we destruct, and the u16state is used after it's
destructed by us parsing the process's last words.
We should have been doing this all along.
## Summary of the Pull Request
Introduces convenience type `til::size` which automatically implements our best practices for size-related types and provides automatic conversions in/out of the relevant types.
## PR Checklist
* [x] In support of Differental Rendering #778
* [X] I work here.
* [x] Tests added/passed
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- Automatically converts in from anything with a X/Y (console `COORD`) or cx/cy (Win32 `SIZE`)
- Automatically converts out to `COORD`, `SIZE`, or `D2D1_SIZE_F`.
- Constructs from bare integers written into source file
- Default constructs to empty
- Uses Chromium Math for all basic math operations (+, -, *, /)
- Provides equality tests
- Adds initial proposal for division-to-ceiling (round up division) that attempts to `ceil` without any floating point math.
- Accessors for height/width
- Type converting accessors (that use safe conversions and throw) for height/width
- Convenience function for area calculation (as that's common with type) and uses safe math to do it.
- TAEF/WEX Output and Comparators so they will print very nicely with `VERIFY` and `Log` macros in our testing suite.
## Validation Steps Performed
- See automated tests of functionality.
## Summary of the Pull Request
- Changes the `IRenderEngine` interface to return a vector of values instead of just a single one. Engines that want to report one still can. Engines that want to report multiple smaller ones will be able to do so going forward.
## PR Checklist
* [x] In support of differential rendering #778
* [x] I work here.
* [x] Manually tested it still works.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
- Some of my ideas for the `DxEngine` require the ability to specify multiple smaller rectangles instead of one giant one, specifically to mitigate the case where someone refreshes just one cell in two opposite corners of the display (which currently coalesces into refreshing the entire display.)
- This is pulled out into an individual PR to make it easier to review that concept changing.
## Validation Steps Performed
- Ran the Terminal
With certain font faces at certain sizes, the advances seem to be
slightly more than the pixel grid; Cascadia Code at 13pt (though, 200%
scale) had an advance of 10.000001.
This commit makes it so that anything sub-1/100 of a cell won't make us
break up runs, because doing so results in suboptimal rendering.
Fixes#4806.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
I originally thought that setting `TSFInputControl::_editContext.InputPaneDisplayPolicy` to be Automatic would allow the InputPanel to show and hide automatically when `TSFInputControl` gains and loses focus. It doesn't seem to behave that way, so we'll show the InputPanel manually.
I'll show the panel during `PointerPressedHandler` and during `GotFocusHandler`. A user will have the on-screen keyboard pop up when getting focus, but if they close the keyboard, they can simply re-tap on the terminal to bring it back up.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#3639
* [x] CLA signed.
* [x] Tests added/passed
## Validation Steps Performed
Played on my surfaces book with the on screen keyboard by closing/tapping on the terminal and using the search box.
## Summary of the Pull Request
When we are maximized or fullscreened, check for the presence of the taskbar in auto-hide mode. If the Terminal finds the taskbar on any side of the monitor, adjust our window rect by just a little bit, so that the taskbar can still be revealed by the user mousing over that edge.
## References
## PR Checklist
* [x] Closes#1438
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Note to future code archeologists:
This doesn't seem to work for fullscreen on the primary display. However, testing a bunch of other apps with fullscreen modes and an auto-hiding taskbar has shown that _none_ of them reveal the taskbar from fullscreen mode. This includes Edge, Firefox, Chrome, Sublime Text, Powerpoint - none seemed to support this.
This does however work fine for maximized.
## Validation Steps Performed
I'm maximized and fullscreened the Terminal a lot in the last two days.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Right clicking on a focused tab while Copy On Select is active currently copies any active selection. This is because `PointerReleasedHandler` doesn't check for the mouse button that was released.
During a mouse button release, only the left mouse button release should be doing anything.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4740
* [x] CLA signed.
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
These are the scenarios I've tested. They're a combination of in focus/out of focus, Copy On Select on/off, left/right click pressed and their move and release variants.
From Out of Focus:
- Left Click = Focus
- Left Click Move = Focus + Selection
- Left Click Release
- CoS on = Copy
- CoS off = Nothing
- Shift Left Click = Focus
- Right Click
- Focus
- CoS on = Paste
- CoS off = Copy if Active Selection, Paste if not.
- Right Click Move = Nothing
- Right Click Release = Nothing
From In Focus
- Left Click = Selection if CoS off
- Left Click Move = Selection
- Left Click Release
- CoS on = Copy
- CoS off = Nothing
- Shift Left Click = Set Selection Anchor
- Right Click
- CoS on = Paste
- CoS off = Copy if Active Selection, Paste if not.
- Right Click Move = Nothing
- Right Click Release = Nothing
til::color will help us move away from COLORREF internally. It supports
conversion to/from COLORREF, and from all types of structs containing
members named R, G, B and A (or r, g, b, and a).
## Validation Steps Performed
Tests; run through profile/colorScheme deserialization with `til::color`
instead of `uint32_t` or `COLORREF`.
checkpointing this since it's so close. It works for everything but fullscreen on my primary, 125% display which has the taskbar on top, and autohides. Every other case works fine.
[Git2Git] Merged PR 4314209: Fix some TVS warnings in Console UIA
1. We were doing `FAILED(X || FAILED(Y))` instead of `FAILED(X) || FAILED(Y)`.
Fixes MSFT:24904151. Fixes MSFT:24904224.
2. You cannot SAL-annotate a `gsl::not_null`.
Fixes MSFT:24904221
Related work items: #24904151, #24904221, #24904224 Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 46167d4415c888d4d6a52ea7d3e3cc57a0f5a78d
Related work items: #24904151, #24904221, #24904224
## Summary of the Pull Request
Add a `SizeChanged` handler to the titlebar content UI element. It's possible that this element's size will change after the dragbar's. When that happens, the drag bar won't send another `SizeChanged` event, because the dragbar's _size_ didn't change, only it's position.
## References
We originally duped this issue to #4166, but after #4829 fixed that issue, this one persisted. They're all related, and _look_ like dupes, but they weren't.
## PR Checklist
* [x] Closes#4288
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
## Validation Steps Performed
I had a solid 100% repro that doesn't repro anymore.
I've maximized, restored, resized, and generally played with the window a bunch.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Emoji composition was only being shown one letter at a time. This is because of the way I expected `CoreTextTextUpdatingEventArgs.Range` to be provided to TSFInputControl during composition (for Chinese/Japanese IME). Emoji IME composition gives the `StartCaretPosition` as the same as `EndCaretPosition`, unlike how for Chinese/Japanese IME, `StartCaretPosition` is usually the start of the composition and `EndCaretPosition` is the latest character in the composition. The solution is to change the `_inputBuffer.substr()` call to simply grab all of the buffer starting from `_activeTextStart`. This way I can ensure that I grab all of the "active text", instead of trusting the given `args.Range` to tell me the active text.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4828
* [x] CLA signed.
* [x] Tests added/passed
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Chinese, Japanese, Korean, Emoji composition performed. Emoji selection through pointer also performed.
## Summary of the Pull Request
`GetTextForClipboard` already exists in the TextBuffer. It makes sense to use that for UIA as well. This changes the behavior or `GetText()` such that it does not remove leading/trailing whitespace anymore. That is more of an expected behavior.
## References
This also contributes to...
- #4509: UIA Box Selection
- #2447: UIA Signaling for Selection
- #1354: UIA support for Wide Glyphs
Now that the expansion occurs at before render-time, the selection anchors are an accurate representation of what is selected. We just need to move GetText to the TextBuffer. Then we can have those three issues just rely on code from the text buffer. This also means ConHost gets some of this stuff for free 😀
## Detailed Description of the Pull Request / Additional comments
- `TextBuffer::GetTextForClipboard()` --> `GetText()`
- `TextBuffer::GetText()` no longer requires GetForegroundColor/GetBackgroundColor. If either of these are not defined, we return a `TextAndColor` with only the `text` field populated.
- renamed a few parameters for copying text to the clipboard for clarity
- Updated `UiaTextRange::GetText()` to use `TextBuffer::GetText()`
## Validation Steps Performed
Manual tests for UIA using accessibility insights and Windows Terminal's copy action (w/ and w/out shift)
Added tests as well.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Translate automatically generated message text from German into English.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#4799
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
@miniksa mentioned in https://github.com/microsoft/terminal/pull/4799#discussion_r389166916
> Actually..... we would consider that block to be wrong. It should have had the English error text there. [...] It's just our practice to have everything be in English as that's our company's working language. [...]
The translation is based on the message text found in the official docs: https://docs.microsoft.com/en-us/nuget/Consume-Packages/Package-restore-troubleshooting
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## Summary of the Pull Request
We're deref'ing a null `_terminal`. Don't do that. This is a _okay_ fix, mostly to stem the bleeding. @DHowett-MSFT's got a mind for a real fix to #4166, but this isn't it.
## PR Checklist
* [x] related to #4166
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Summary of the Pull Request
Pretty straightforward. When we get a `WM_DISPLAYCHANGE`, that means the
display's DPI changed. When that happens, resize the drag bar, so that
it'll reflect the new scaling.
Unblocks #4778Closes#4166
## Validation
Man I've changed the DPI of my displays so many times in the last 30
minutes. I dragged the window across a bunch of DPI boundaries too.
AutomationProperties of interest in this PR include...
- Name: the name of a UI element (generally used as the main identifier
for it)
- HelpText: an additional description for a more complex UI element
- AccessibilityView[1]
- Raw: hide from the UIA tree. Only navigate to this if you know what
you're doing
- Control: a control without any content in it. Basically, a point at
which the user can make a decision as to how to navigate the tree or
invoke an action.
- Content: a control that also has content to present to the user.
I set a few more AutomationProperties throughout Windows Terminal...
- MinMaxClose Control: hidden (we can/should rely on the true buttons
that we are hiding)
- SplitButton: Name and Help text (currently ignored due to #4804, but
having it in the resource file won't cause any problems)
- SearchBox: added a more specific name to the close button
- BackgroundImage: hide it
## References
A few additional work items have been created for tracking...
- SplitButton: https://github.com/microsoft/terminal/issues/4804
## PR Checklist
* [X] Closes#2099
* [X] Closes#2102
## Validation Steps Performed
Verified using Accessibility Insights and Inspect.exe
[1] https://docs.microsoft.com/en-us/windows/win32/winauto/uiauto-treeoverview
## Summary of the Pull Request
Adds warning messages for a pair of keybindings-related scenarios. This covers the following two bugs:
* #4239 - If the user has supplied more than one key chord in their `"keys"` array.
* #3522 - If a keybinding has a _required_ argument, then we'll display a message to the user
- currently, the only required parameter is the `direction` parameter for both `resizePane` and `moveFocus`
## References
When we get to #1334, we'll want to remove the `TooManyKeysForChord` warning.
## PR Checklist
* [x] Closes#4239
* [x] Closes#3522
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested manually, added tests.
The Xaml input stack doesn't allow an application to suppress the "caret
browsing" dialog experience triggered when you press F7.
The official recommendation from the Xaml team is to catch F7 before we
hand it off.
This commit introduces a special F7 handler and an ad-hoc implementation of event bubbling.
Runtime classes implementing a custom IF7Listener interface are
considered during a modified focus parent walk to determine who can
handle F7 specifically.
If the recipient control handles F7, we suppress the message completely.
This event bubbler has some minor issues -- the search box will not be
able to receive F7 because its parent control implements the handler.
Since search is already mostly a text box, it doesn't _need_ special
caret browsing functionality as far as I can tell.
TermControl implements its OnF7Pressed handler by synthesizing a
keybindings event and an event to feed into Terminal Core directly.
It's not possible to create a synthetic KeyPressRoutedEvent; if it were,
I would have just popped one into the traditional input queue. :)
Fixes#638.
## Summary of the Pull Request
1) Improves the performance of word-recognition operations such as word
navigation in UIA and selection.
2) Fixes a bug where attempting to find the next word in UIA, when none
exists, would hang
3) TraceLogging code only runs when somebody is listening
## Detailed Description of the Pull Request / Additional comments
- The concept of a delimiter class got moved to the CharRow.
- The buffer iterator used to save a lot more information than we needed
- I missed updating a tracing function after making GetSelection return
one text range. That is fixed now.
## Validation Steps Performed
Performed Word Navigation under Narrator and NVDA.
NOTE: The release build should be used when testing to optimize
performance
Closes#4703
## Summary of the Pull Request
Korean IME was not working correctly due to way we were clearing the input buffer inside of `TSFInputControl`. We wanted to clear our input buffer and tell TSF to clear its input buffer as well when we receive a `CompositionCompleted` event. This works fine in some IME languages such as Chinese and Japanese. However, Korean IME composes characters differently in such a way where we can't tell TSF to clear their buffer during a `CompositionCompleted` event because it would clear the character that triggered the `CompositionCompleted` event in the first place.
The solution in this PR is to keep our `_inputBuffer` intact until the user presses <kbd>Enter</kbd> or <kbd>Esc</kbd>, in which case we clear our buffer and the TSF buffer. I've chosen these two keys because it seems to make sense to clear the buffer after text is sent to the terminal with <kbd>Enter</kbd>, and <kbd>Esc</kbd> usually means to cancel a current composition anyway.
This means we need to keep track of our last known "Composition Start Point", which is represented by `_activeTextStart`. Whenever we complete a composition, we'll send the portion of the input buffer between `_activeTextStart` and the end of the input buffer to the terminal. Then, we'll update `_activeTextStart` to be the end of the input buffer so that the next time we send text to the terminal, we'll only send the portion of our buffer that's "active".
## PR Checklist
* [x] Closes#4226
* [x] CLA signed
* [x] Tests added/passed
## Validation Steps Performed
Manual testing with Chinese, Japanese, and Korean IME.
* Azure: rewrite user input handler
This commit replaces the AzureConnection's input handler with one that
acts more like "getline()". Instead of the Read thread setting a state
and WriteInput filling in the right member variable, the reader blocks
on the user's input and receives it in an optional<string>.
This moves the input number parsing and error case handling closer to
the point where those inputs are used, as opposed to where they're
collected.
It also switches our input to be "line-based", which is a huge boon for
typing tenant numbers >9. This fixes#3233. A simple line editor
(supporting only backspace and CR) is included.
It also enables echo on user input, and prints it in a nice pretty green
color.
It also enables input queueing: if the user types anything before the
connection is established, it'll be sent once it is.
Fixes#3233.
* Azure: display the user's options and additional information in color
This commit colorizes parts of the AzCon's strings that include "user
options" -- things the user can type -- in yellow. This is to help with
accessibility.
The implementation here is based on a discussion with the team.
Alternative options for coloration were investigated, such as:
* Embedding escape sequences in the resource file.
This would have been confusing for translators.
The RESW file format doesn't support  escapes, so we would need
some magic post-processing.
* Embedding "markup" in the resource file (like #{93m}, ...)
This still would have been annoying for translators.
We settled on an implementation that takes resource names, colorizes
them, and string-formats them into other resources.
* Azure: follow the user's shell choice from the online portal
Fixes#2266.
* Azure: remove all credentials instead of just the first one
- don't decrement backIter ahead of the string begin
- ensure partial multibyte characters are still captured correctly if
the state class gets them byte by byte
- while we're here, switch to chromium math
Closes#4791Closes#4290
## Summary of the Pull Request
Adjusts column padding code in `CustomTextLayout` to only pad out for surrogate pairs, not anything that reports two columns.
## References
- See also #4747
## PR Checklist
* [x] Closes#4780
* [x] I work here.
* [x] Manual tests.
* [x] No doc, this fixes code to match comment. Oops.
* [x] Am core contributor. Also discussed with @leonMSFT.
## Detailed Description of the Pull Request / Additional comments
For surrogate pairs like high Unicode emoji, we receive two wchar_ts but only one column count (which is usually 2 because emoji are usually inscribed in the full-width squares.) To compensate for this, I added in a little padding function at the top of the `CustomTextLayout` construction that adds a column of 0 aligned with the second half of a surrogate pair so the text-to-glyph mapping lines up correctly.
Unfortunately, I made a mistake while either responding to PR feedback in #4747 or in the first place and I made it pad out extra 0 columns based on the FIRST column count, not based on whether or not there is a trailing surrogate pair. The correct thing to do is to pad it out based on the LENGTH of text associated with the given column count. This means that full width characters which can be represented in one wchar_t, like those coming from the IME in most cases (U+5C41 for example) will have a column count of 2. This is perfectly correct for mapping text-to-glyphs and doesn't need a 0 added after it. A house emoji (U+1F3E0) comes in as two wchar_ts (0xD83C 0xDFE0) with the column count of 2. To ensure that the arrays are aligned, the 2 matches up with the 0xD83C but the 0xDFE0 needs a 0 on it so it will be skipped over. (Don't worry, because it's a surrogate, it's naturally consumed correctly by the glyph mapper.)
The effect was that every OTHER character inserted by the IME was scaled to 0 size (as an advance of 0 was expected for 0 columns).
The fix restores it so those characters don't have an associated count and aren't scaled.
## Validation Steps Performed
- Opened it up
- Put in the house emoji like #4747 (U+1f3e0)
- Put in some characters with simplified Chinese IME (fixed now)
- Put in the utf83.txt sample text used in #4747
## Summary of the Pull Request
Match conhost behavior and clear selection on viewport/font resize.
## PR Checklist
* [X] Closes#1165
## Validation Steps Performed
Retried attached bug repro steps
## Summary of the Pull Request
- Improves the correction of the scaling and spacing that is applied to
glyphs if they are too large or too small for the number of columns that
the text buffer is expecting
## References
- Supersedes #4438
Co-authored-by: Mili (Yi) Zhang <milizhang@gmail.com>
- Related to #4704 (#4731)
## PR Checklist
* [x] Closes#696
* [x] Closes#4375
* [x] Closes#4708
* [x] Closes a crash that @DHowett-MSFT complained about with
`"x" * ($Host.UI.RawUI.BufferSize.Width - 1) + "`u{241b}"`
* [x] Eliminates an exception getting thrown with the U+1F3E0 emoji in
`_CorrectGlyphRun`
* [x] Corrects several graphical issues that occurred after #4731 was
merged to master (weird repeats and splits of runs)
* [x] I work here.
* [x] Tested manually versus given scenarios.
* [x] Documentation written into comments in the code.
* [x] I'm a core contributor.
## Detailed Description of the Pull Request / Additional comments
- The `_CorrectGlyphRun` function now walks through and uses the
`_glyphClusters` map to determine the text span and glyph span for each
cluster so it can be considered as a single unit for scaling.
- The total number of columns expected across the entire cluster
text/glyph unit is considered for the available spacing for drawing
- The total glyph advances are summed to see how much space they will
take
- If more space than necessary to draw, all glyphs in the cluster are
offset into the center and the extra space is padded onto the advance of
the last glyph in the range.
- If less space than necessary to draw, the entire cluster is marked for
shrinking as a single unit by providing the initial text index and
length (that is back-mapped out of the glyph run) up to the parent
function so it can use the `_SetCurrentRun` and `_SplitCurrentRun`
existing functions (which operate on text) to split the run into pieces
and only scale the one glyph cluster, not things next to it as well.
- The scale factor chosen for shrinking is now based on the proportion
of the advances instead of going through some font math wizardry
- The parent that calls the run splitting functions now checks to not
attempt to split off text after the cluster if it's already at the end.
This was @DHowett-MSFT's crash.
- The split run function has been corrected to fix the `glyphStart`
position of the back half (it failed to `+=` instead of `=` which
resulted in duplicated text, sometimes).
- Surrogate pair emoji were not allocating an appropriate number of
`_textClusterColumns`. The constructor has been updated such that the
trailing half of surrogate pairs gets a 0 column width (as the lead is
marked appropriately by the `GetColumns()` function). This was the
exception thrown.
- The `_glyphScaleCorrections` array stored up over the calls to
`_CorrectGlyphRun` now uses a struct `ScaleCorrection` as we're up to 3
values.
- The `ScaleCorrection` values are named to clearly indicate they're in
relation to the original text span, not the glyph spans.
- The values that are used to construct `ScaleCorrection`s within
`_CorrectGlyphRun` have been double checked and corrected to not
accidentally use glyph index/counts when text index/counts are what's
required.
## Validation Steps Performed
- Tested the utf82.txt file from one of the linked bugs. Looked
specifically at Burmese through Thai to ensure restoration (for the most
part) of the behavior
- Ensured that U+1f3e0 emoji (🏠) continues to draw correctly
- Checked Fixedsys Excelsior font to ensure it's not shrinking the line
with its ligatures
- Checked ligatureness of Cascadia Code font
- Checked combining characters U+0300-U+0304 with a capital A
PR #4548 inadvertantly broke mouse button input in the WPF control. This happened due to the extra layer of HWND indirection. The fix is to move the mouse button handling down into the native control where the window messages are now being sent.
- When performing chunk selection, the expansion now occurs at the time
of the selection, not the rendering of the selection
- `GetSelectionRects()` was moved to the `TextBuffer` and is now shared
between ConHost and Windows Terminal
- Some of the selection variables were renamed for clarity
- Selection COORDs are now in the Text Buffer coordinate space
- Fixes an issue with Shift+Click after performing a Multi-Click
Selection
## References
This also contributes to...
- #4509: UIA Box Selection
- #2447: UIA Signaling for Selection
- #1354: UIA support for Wide Glyphs
Now that the expansion occurs at before render-time, the selection
anchors are an accurate representation of what is selected. We just need
to move `GetText` to the `TextBuffer`. Then we can have those three
issues just rely on code from the text buffer. This also means ConHost
gets some of this stuff for free 😀
### TextBuffer
- `GetTextRects` is the abstracted form of `GetSelectionRects`
- `_ExpandTextRow` is still needed to handle wide glyphs properly
### Terminal
- Rename...
- `_boxSelection` --> `_blockSelection` for consistency with ConHost
- `_selectionAnchor` --> `_selectionStart` for consistency with UIA
- `_endSelectionPosition` --> `_selectionEnd` for consistency with
UIA
- Selection anchors are in Text Buffer coordinates now
- Really rely on `SetSelectionEnd` to accomplish appropriate chunk
selection and shift+click actions
## Validation Steps Performed
- Shift+Click
- Multi-Click --> Shift+Click
- Chunk Selection at...
- top of buffer
- bottom of buffer
- random region in scrollback
Closes#4465Closes#4547
Defines the following automation properties for a Terminal Control:
- [**Orientation**](https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.automation.peers.automationpeer.getorientationcore):
- The orientation of the control
- None --> Vertical
- [**Name**](https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.automation.peers.automationpeer.getnamecore):
- The name as used by assistive technology and other Microsoft UI
Automation clients. Generally presented by automation clients as the
primary way to identify an element (along with the control type)
- "" --> <profile name>
- [**HelpText**](https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.automation.peers.automationpeer.gethelptextcore):
- The help text. Generally presented by automation clients if
requested by the user. This would be something that you would normally
expect to appear from tooltips.
- "" --> <tab title>
- [**LiveSetting**](https://docs.microsoft.com/en-us/uwp/api/windows.ui.xaml.automation.peers.automationpeer.getlivesettingcore):
- reports the live setting notification behavior. A representation of
how assertive this control should be when content changes.
- none --> Polite
## Detailed Description of the Pull Request / Additional comments
ProfileName had to be added to the TerminalSettings (IControlSettings)
to pass that information along to the automation peer. In the rare event
that somebody purposefully decided to make their ProfileName empty, we
fallback to the tab title.
## Validation Steps Performed
Verified using Accessibility Insights and inspect.exe
This is are some examples of the information a general user can expect
to receive about a Terminal Control.
- Type: Terminal Control
- Name: Command Prompt
- Help Text (if requested): Command Prompt - ping bing.com
- Type: Terminal Control
- Name: Ubuntu
- Help Text (if requested): cazamor@PC-cazamor:/mnt/c/Users/cazamor$
Note, it is generally read by an automation client as follows:
"<type>, <name>"
References #2099 - Automation Properties for TerminalControl, Search Box
References #2142 - Localization
Closes#2142
## Summary of the Pull Request
`keys` in `keybindings` now accepts a string value. This assumes that you wanted a keychord of size 1. The schema and user docs were properly updated too.
This means that the following keybinding is now accepted in your profiles.json:
```json
{ "command": "copy", "keys": "ctrl+c" }
```
as opposed to...
```json
{ "command": "copy", "keys": [ "ctrl+c" ] }
```
## PR Checklist
* [X] Closes#4713
* [X] CLA signed.
* [X] Tests added/passed
* [X] Requires documentation to be updated
## Validation Steps Performed
- [X] tested the new schema
- [X] added test
## Summary of the Pull Request
Fix a bug where the `Renderer::PaintFrame` method:
1. is not called until the next `RenderThread::NotifyThread` call but needs to be called because there the terminal was updated (theoretical bug)
2. is called twice but needs to be called only once (verified bug)
## References
The bug was introduced by #3511.
## PR Checklist
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
## Detailed Description of the Pull Request / Additional comments
### Before
#### First bug
In the original code, `_fNextFrameRequested` is set to `true` in render thread because `std::atomic_flag::test_and_set` is called.
This is wrong because it means that the render thread will render the terminal again even if there is no change after the last render.
I think the the goal was to load the boolean value for `_fNextFrameRequested` to check whether the thread should sleep or not.
The problem is that there is no method on `std::atomic_flag` to load its boolean value. I guess what happened was that the "solution" that was found was to use `std::atomic_flag::test_and_set`, followed by `std::atomic_flag::clear` if the value was `false` originally (if `std::atomic_flag::test_and_set` returned `false`) to restore the original value. I guess that this was believed to be equivalent to just a simple load, without doing any change to the value because it restores it at the end.
But it's not: this is dangerous because if the value is changed to `true` between the call to `std::atomic_flag::test_and_set` and the call to `std::atomic_flag::clear`, then the value ends up being `false` at the end which is wrong because we don't want to change it! And if that value ends up being `false`, it means that we miss a render because we will wait on `_hEvent` during the next iteration on the render thread.
Well actually, here, this not even a problem because when that code is ran, `_fPainting` is `false` which means that the other thread that modifies the `_fNextFrameRequested` value through `RenderThread::NotifyPaint` will not actually modify `_fNextFrameRequested` but rather call `SetEvent` (see the method's body).
But wait! There is a problem there too! `std::atomic_flag::test_and_set` is called for `_fPainting` which sets its value to `true`. It was probably unintended. So actually, the next call to `RenderThread::NotifyPaint` _will_ end up modifying `_fNextFrameRequested` which means that the data race I was talking about _might_ happen!
#### Second bug
Let's go back a little bit in my explanation. I was talking about the fact that:
> I guess what happened was that the "solution" that was found was to use `std::atomic_flag::test_and_set`, followed by `std::atomic_flag::clear` if the value was `false` originally (if `std::atomic_flag::test_and_set` returned `false`) to restore the original value.
The problem is that the reverse was done in the implementation: `std::atomic_flag::clear` is called if the value was _`true`_ originally!
So at this point, if the value of `_fNextFrameRequested` was `false`, then `std::atomic_flag::test_and_set` sets its is set to `true` and returns `false`. So for the next iteration, `_fNextFrameRequested` is `true` and the render thread will re-render but that was not needed.
### After
I used `std::atomic<bool>` instead of `std::atomic_flag` for `_fNextFrameRequested` and the other atomic field because it has a `load` and a `store` method so we can actually load the value without changing it.
I also replaced `_fPainting` by `_fWaiting`, which is basically the opposite of `_fPainting` but stays `true` for a little shorter than `_fPainting` would stay `false`. Indeed, I think that it makes more sense to directly wrap/scope _just_ the call to `WaitForSingleObject` by setting my atomic variable to `true` _just_ before and to `false` _just_ after because:
* It makes more sense while you're reading the code: it's easier IMO to understand what the purpose of `_fWaiting` is (that is, to call `SetEvent` from `RenderThread::NotifyPaint` if it's `true`).
* It's probably a tiny bit better for performance because it will become `true` for a little shorter which means less calls to `SetEvent`.
#### Warning
I don't really understand [std::memory_order](https://en.cppreference.com/w/cpp/atomic/memory_order)s.
So I used the default one (`std::memory_order_seq_cst`) which is the safest.
I believe that if no read or write are reordered in the two threads (`RenderThread::NotifyPaint` and `RenderThread::_ThreadProc`), then the code I wrote will behave correctly.
I think that `std::memory_order_seq_cst` enforces that so it should be fine, but I'm not sure.
## Validation Steps Performed
**I tried to reproduce the second bug that I described in the first section of this PR.**
I put a breakpoint on `RenderThread::NotifyPaint` and on `Renderer::PaintFrame`. Initially they are disabled. Then I ran the terminal in Release mode, waited a bit for the prompt to display and the cursor to start blinking. Then I enabled the breakpoints.
### Before
Each `RenderThread::NotifyPaint` is followed by 2 `Renderer::PaintFrame` calls. ❌
### After
Each `RenderThread::NotifyPaint` is followed by 1 `Renderer::PaintFrame` call. ✔️
## Summary of the Pull Request
Changes how conpty emits text to preserve line-wrap state, and additionally adds rudimentary support to the Windows Terminal for wrapped lines.
## References
* Does _not_ fix (!) #3088, but that might be lower down in conhost. This makes wt behave like conhost, so at least there's that
* Still needs a proper deferred EOL wrap implementation in #780, which is left as a todo
* #4200 is the mega bucket with all this work
* MSFT:16485846 was the first attempt at this task, which caused the regression MSFT:18123777 so we backed it out.
* #4403 - I made sure this worked with that PR before I even sent #4403
## PR Checklist
* [x] Closes#405
* [x] Closes#3367
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I started with the following implementation:
When conpty is about to write the last column, note that we wrapped this line here. If the next character the vt renderer is told to paint get is supposed to be at the start of the following line, then we know that the previous line had wrapped, so we _won't_ emit the usual `\r\n` here, and we'll just continue emitting text.
However, this isn't _exactly_ right - if someone fills the row _exactly_ with text, the information that's available to the vt renderer isn't enough to know for sure if this line broke or not. It is possible for the client to write a full line of text, with a `\n` at the end, to manually break the line. So, I had to also add the `lineWrapped` param to the `IRenderEngine` interface, which is about half the files in this changelist.
## Validation Steps Performed
* Ran tests
* Checked how the Windows Terminal behaves with these changes
* Made sure that conhost/inception and gnome-terminal both act as you'd expect with wrapped lines from conpty
This commit removes all of the custom UI initialization code in
TermControl and replaces it with a xaml file. Some dead or reundant code
was removed as part of this refactoring.
It also fixes two (quasi-related) issues:
* The search box, on first launch, was offset by the scrollbar even if
the scrollbar was invisible.
* The scrollbar state wasn't hot-reloadable.
The new UIA code in PublicTerminalCore broke windows 7 support by referring
to API set dlls for UIA. This PR changes the link line to link to
UIAutomationcore.dll directly.
## Summary of the Pull Request
- Surrogate pairs are being split in half with the run splitting check.
## References
- Related to #4708 but not going to fix it.
## PR Checklist
* [x] Closes#4704
* [x] I work here.
* [x] I am a core contributor.
## Detailed Description of the Pull Request / Additional comments
- The adjustment of the run heights in the correction function reports back a text index and a scaling factor. However, I didn't remember at the time that the text is being stored as UTF-16. So the index given can be pointing to the high surrogate of a pair. Thus adding 1 to split "after" the text character, then backing up by 1 isn't valid in if the index given was for a high surrogate.
The quick fix is to advance by two if it's a high surrogate and one otherwise.
## Validation Steps Performed
- Used the sample code from #4704 to print the house emoji in various situations into the buffer.
## Summary of the Pull Request
Currently, when the user attempts to type using IME while the Search Box is focused, the input goes to the terminal instead. This is due to the fact that the `TSFInputControl` assumes it's in control whenever TermControl gets focus. So, it'll intercept IME input before the Search Box receives it. We simply need to modify `TermControl::GotFocus` to check if the SearchBox has focus. If it does, `TSFInputControl::NotifyFocusEnter` shouldn't be called.
As a small side fix, I've also disabled the terminal cursor blinking when the Search Box has focus.
Thinking a little further, if we have more features in the future that behave like search box (i.e. advanced tab switcher, or any other XAML controls that pop up) and require text input, we might need to create a sort of "AnyOtherTextControlInFocus" function to see if TSFInputControl should receive focus or not.
## PR Checklist
* [x] Closes#4434
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Search works as expected with IME. Composition picker appears underneath Search Box when typing IME in the Search Box. Clicking outside of the Search Box still returns control to TSFInputControl/TermControl.
Terminal Cursor blinks when it has focus, and doesn't when the Search Box has focus.
## Summary of the Pull Request
Currently, while in IME mode, selections with the Emoji/Kaomoji/Symbol Picker (which is brought up with <kbd>win+.</kbd>) are not displayed until the user starts a new composition. This is due to the fact that we hide the TextBlock when we receive a CompositionCompleted event, and we only show the TextBlock when we receive a CompositionStarted event. Input from the picker does not count as a composition, so we were never showing the text box, even if the symbols were thrown into the inputBuffer. In addition, we weren't receiving CompositionStarted events when we expected to.
We should be showing the TextBlock when we receive _any_ text, so we should make the TextBlock visible inside of `TextUpdatingHandler`. Furthermore, some really helpful discussion in #3745 around wrapping the `NotifyTextChanged` call with a `NotifyFocusLeave` and a `NotifyFocusEnter` allowed the control to much more consistently determine when a CompositionStarted and a CompositionEnded.
I've also went around and replaced casts with saturating casts, and have removed the line that sets the `textBlock.Width()` so that it would automatically set its width. This resolves the issue where while composing a sentence, the textBlock would be too small to contain all the text, so it would be cut off, but the composition is still valid and still able to continue.
## PR Checklist
* [x] Closes#4148
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Tested picking emojis, kaomojis, and symbols with numerous different languages.
This commit introduces two fixes for C5205 (delete of an abtract class
without a virtual dtor) and one fix for a very hopeful VS version gating
that didn't pan out.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
- Scale the retro terminal effects (#3468) scan lines with the screen's DPI.
- Remove artifacts from sampling wrap around.
Before & after, with my display scale set to 350%:
Before & after showing artifact removal, with my display scale set to 100%, and image enlarged to 400%:
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#4362
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Adds a constant buffer, which could be used for other settings for the retro terminal pixel shader.
I haven't touched C++ in over a decade before this change, and this is the first time I've played with DirectX, so please assume my code isn't exactly best practice. 🙂
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
- Changed display scale with experimental.retroTerminalEffect enabled, enjoyed scan lines on high resolution monitors.
- Enabled experimental.retroTerminalEffect, turned the setting off, changed display scale. Retro tabs still scale scan lines.
This PR hooks up the existing UIA implementation to the WPF control. Some existing code that was specific to the UWP terminal control could be shared so that has been refactored to a common location as well.
## Validation Steps Performed
WPF control was brought up in UISpy and the UIA tree was verified. NVDA was then used to check that screen readers were operating properly.
## Summary of the Pull Request
Fixes a flaw that happened if `til::u8u16` received a single lead byte.
## PR Checklist
* [x] Closes#4673
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
The loop for caching partials didn't run and thus, the lead byte was
converted to U+FFFD. That's because the loop starts with `sequenceLen`
initialized with 1. And if the string has a length of 1 the initial
condition is `1<1` which is evaluated to `false` and the body of the
loop was never executed.
## Validation Steps Performed
1) updated the code of the state class and tested manually that `printf
"\xE2"; printf "\x98\xBA\n"` prints a U+263A character
2) updated the unit tests to make sure that still up to 3 partials are
cached
3) updated the unit tests to make sure caching also works if the string
consists of a lead byte only
4) tested manually that #4086 is still resolved
## Summary of the Pull Request
Adjusts `DrawGlyphRun` method inside DirectX renderer to restrict text
to be clipped within the boundaries of the row.
## PR Checklist
* [x] Closes#1703
* [x] I work here.
* [x] No tests.
* [x] No docs.
* [x] I am core contributor.
## Detailed Description of the Pull Request / Additional comments
For whatever reason, some of these shade glyphs near U+2591 tend to
extend way above the height of where we expect they should. This didn't
look like a problem in conhost because it clipped every draw inside the
bounds. This therefore applies the same clip logic as people don't
really expect text to pour out of the box.
It could, theoretically, get us into trouble later should someone
attempt zalgo text. But doing zalgo text is more of a silliness that
varies in behavior across rendering platforms anyway.
## Validation Steps Performed
- Ran the old conhost GDI renderer and observed
- Ran the new Terminal DX renderer and observed
- Made the code change
- Observed that the height and approximate display characteristics of
the U+2591 shade and neighboring characters now matches with the conhost
GDI style to stay within its lane.
## Summary of the Pull Request
- Height adjustment of a glyph is now restricted to itself in the DX
renderer instead of applying to the entire run
- ConPTY compensates for drawing the right half of a fullwidth
character. The entire render base has this behavior restored now as
well.
## PR Checklist
* [x] Closes#2191
* [x] I work here
* [x] Tests added/passed
* [x] No doc
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
Two issues:
1. On the DirectX renderer side, when confronted with shrinking a glyph,
the correction code would apply the shrunken size to the entire run, not
just the potentially individual glyph that needed to be reduced in size.
Unfortunately while adjusting the horizontal X width can be done for
each glyph in a run, the vertical Y height has to be adjusted for an
entire run. So the solution here was to split the individual glyph
needing shrinking out of the run into its own run so it can be shrunk.
2. On the ConPTY side, there was a long standing TODO that was never
completed to deal with a request to draw only the right half of a
two-column character. This meant that when encountering a request for
the right half only, we would transmit the entire full character to be
drawn, left and right halves, struck over the right half position. Now
we correct the cursor back a position (if space) and draw it out so the
right half is struck over where we believe the right half should be (and
the left half is updated as well as a consequence, which should be OK.)
The reason this happens right now is because despite VIM only updating
two cells in the buffer, the differential drawing calculation in the
ConPTY is very simplistic and intersects only rectangles. This means
from the top left most character drawn down to the row/col cursor count
indicator in vim's modeline are redrawn with each character typed. This
catches the line below the edited line in the typing and refreshes it.
But incorrectly.
We need to address making ConPTY smarter about what it draws
incrementally as it's clearly way too chatty. But I plan to do that with
some of the structures I will be creating to solve #778.
## Validation Steps Performed
- Ran the scenario listed in #2191 in vim in the Terminal
- Added unit tests similar to examples given around glyph/text mapping
in runs from Microsoft community page
This commit introduces a small console-subsystem application whose sole
job is to consume TerminalConnection.dll and hook it up to something
other than Terminal. It is 99% of the way to a generic solution.
I've introduced a stopgap in TerminalPage that makes sure we launch
TerminalAzBridge using ConptyConnection instead of AzureConnection.
As a bonus, this commit includes a class whose sole job it is to make
reading VT input off a console handle not terrible. It returns you a
string and dispatches window size change callbacks.
Fixes#2267.
Fixes#4589.
Related to #2266 (since pwsh needs better VT).
This unifies the rest of the projects around the resource structure laid out in WindowsTerminalUniversal. Now we'll have a single flat structure for resource files and keep the qualifiers in their filenames. It's easier to manage this way.
## Summary of the Pull Request
Debugging our custom UIA providers has been a painful experience because outputting content to VS may result in UIA Clients getting impatient and giving up on extracting data.
Adding tracing allows us to debug these providers without getting in the way of reproducing a bug. This will help immensely with developing accessibility features on Windows Terminal and Console.
This pull request additionally contains payload from #4526:
* Make GetVisibleRanges() return one range (and add tracing for it).
`ScreenInfoUiaProvider::GetVisibleRanges()` used to return one range per line of visible text. The documentation for this function says that we should return one per contiguous span of text. Since all of the text in the TermControl will always be contiguous (at least by our standards), we should only ever be returning one range.
## PR Checklist
* [x] Closes#1914. Closes#4507.
* [x] CLA signed
## Detailed Description of the Pull Request / Additional comments
`UiaTracing` is a singleton class that is in charge of registration for trace logging. `TextRange` is used to trace `UiaTextRange`, whereas `TextProvider` is used to trace `ScreenInfoUiaProviderBase`.
`_getValue()` is overloaded to transform complex objects and enums into a string for logging.
`_getTextValue()` had to be added to be able to trace the text a UiaTextRange included. This makes following UiaTextRanges much simpler.
## Validation Steps Performed
Performed a few operations when under NVDA/Narrator and manually checked the results.
## Summary of the Pull Request
Adds an ETW provider for tracing out operations inside the DirectX Renderer.
## References
This supports #2191 and #778 and other rendering issues.
## PR Checklist
* [x] I work here
## Detailed Description of the Pull Request / Additional comments
This declares and defines the provider with the a GUID appropriate for the namespace and adds an initial invalidation rectangle method for figuring out what is being drawn mostly to understand what could be differential.
## Validation Steps Performed
Implemented provider.
Opened real-time ETW tracing tool
Ran the Terminal and watched invalidation events appear live
## Summary of the Pull Request
We used to return multiple text ranges to represent one selection. We only support one selection at a time, so we should only return one range.
Additionally, I moved all TriggerSelection() calls to the renderer from Terminal to TermControl for consistency. This ensures we only call it _once_ when we make a change to our selection state.
## References
#2447 - helps polish Signaling for Selection
#4465 - This is more apparent as the problem holding back Signaling for Selection
## PR Checklist
* [x] Closes#4452
Tested using Accessibility Insights.
## Summary of the Pull Request
Currently, clicking on an unfocused terminal with a selection active will trigger `copyOnSelect`. This is because the check for `copyOnSelect` and copying to the clipboard is bound to when the Pointer is released. This works fine for when a user performs a click-drag selection, but it inadvertently also triggers when the user performs a single click on an unfocused terminal. We expect `copyOnSelect` to trigger only on the first time a selection is completed.
This PR will allow the user to single click on an unfocused terminal that has a selection active without triggering a copyOnSelect. It also ensures that any click-drag selection, whether it's on an unfocused or focused terminal, will trigger copyOnSelect.
## PR Checklist
* [x] Closes#4255
## Validation Steps Performed
Performed manual testing involving permutations of multiple panes, tabs, in focus, and out of focus.
## Summary of the Pull Request
This will allow us to run the ConPTY tests in CI.
## PR Checklist
* [x] Closes MSFT:24265197
* [X] I've discussed this with core contributors already.
## Validation Steps Performed
I've run the tests.
Please note: this code is unchanged (apart from `wil::ScopeExit` -> `wil::scope_exit`) from Windows. Now is not the time to comment on their perfectness.
Fixed inconsistent scrolling when using both touchscreen and precision
touchpad.
Scrolling jumpiness is caused by rounding errors. Instead of retrieving
the current scrolling value from `GetScrollOffset`, which is already
rounded in `int`, let the scrolling operation to operate on
`_scrollBar`'s `Value` directly (which uses `double`) in
`TermControl.cpp`.
TermControl now also respects WHEEL_DELTA, which it was previously
ignoring, to determine how many scroll wheel detents were used.
Testing scrolling on the following scenario manually:
- nonscrollable terminal (e.g. the window is large enough to contain the
current buffer).
- scrolling to the topmost and bottom-most.
- scrolling TUI apps such as `nano` and `more` in WSL.
- after clearing the terminal, both in cmd and WSL.
... has the same behavior between using touchscreen or precision trackpad
and regular mouse wheel.
Closes#4554 (original pull request)
Closes#1066Closes#4542
Reduce unnecessary SetEvent CPU overhead by using `std::atomic_flag` to avoid setting kernel events when the painting thread is already awake and running.
## Summary of the Pull Request
- If no one is listening to the ETW provider for the VT Renderer for diagnostic purposes, do not spend time allocating/deleting/formatting strings for presentation in TraceLogging messages.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes something I noticed while working on the renderer.
* [x] I work here.
* [x] Existing tests should pass
* [x] No doc
* [x] Am core contributor.
## Validation Steps Performed
WPR/WPA
Before: 321/3016 samples on hot path (10.64%)
After: 0/1266 samples on the same path (0%)
## Summary of the Pull Request
The issue seems to be how `SwapChainScaleChanged` gets fired and attempts to tell the renderer
to `UpdateDPI` when the renderer is gone. So, as a quick bandaid, we'll put a quick check to only do the thing if the renderer is alive.
## PR Checklist
* [x] Closes#4539
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Held my new tab button for about thirty seconds then held the close tab button until all tabs closed without a crash.
## Summary of the Pull Request
This PR tries to address some of the weird interactions with pointer pressed events when the Terminal isn't in focus. Here's the four things that have changed as part of this PR;
1. This PR will allow the user to be able to make a selection with a click-drag without having to first perform a single click on a tab/pane to bring it to focus.
2. Another weird bug that's fixed in this PR is where trying to make a selection on an unfocused tab when it already has a selection active will simply extend the existing selection instead of making a new one.
3. Not related to the issue that his PR closes: a right click will now focus the tab/pane.
I've made sure that we still have the existing functionality where a single click on an unfocused tab/pane does not make a single-cell selection and just focuses the tab/pane.
## PR Checklist
* [x] Closes#4282
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Played around with all sorts of selection when in-focus and out of focus with multiple panes and tabs.
Unit tests still pass as well.
This will attempt to match the style of the user's JSON.
Caveats:
1. If the user has no profiles, it'll explode. This isn't new.
2. If the user's indentation style if `{profile}, {profile}, {profile}` (that is: no indentation), you'll get this:
```
{profile}, {profile}, {profile},
{
new profile content
}
```
There may be something better we can do by copying their newline (or lack thereof) and using it in our generator or detecting the indentation of their members as well.
That's an exercise for later.
Ref #2805
## Summary of the Pull Request
This will collect some user choices related to profiles and tab settings to help us understand if and how we should change the in-built defaults.
## PR Checklist
* [x] Closes#3855
* [x] I work here.
* [x] Manual test only.
* [x] Meh, no doc update.
* [x] Am core contributor.
## Detailed Description of the Pull Request / Additional comments
The following data is collected with examples of the types of questions we intend to answer:
1. What is the name of the executable attached to the PTY? (What shells are popular? Should we focus our testing on them? Are there any common ones we are blind to that we should know about?)
- "Microsoft.Windows.Terminal.Connection" {e912fe7b-eeb6-52a5-c628-abe388e5f792}
- "ConPtyConnected" event
- "SessionGuid" value = WT_SESSION
- "Client" value = Name of EXE
2. Is Acrylic used on a tab? And with what opacity? (Do people really want acrylic? Should it be default? What opacity is most pleasing in our context?)
- "Microsoft.Windows.Terminal.App" {24a1622f-7da7-5c77-3303-d850bd1ab2ed}
- "TabInformation" event
- "EventVer" value is now 1u
- "UseAcrylic" value is now TRUE/FALSE on the setting choice
- "TintOpacity" value is now Float on the setting choice
3. What font are people choosing? (Do people move away from Cascadia Code? Which ones are the most popular for us to validate when updating the renderer?)
- "Microsoft.Windows.Terminal.App" {24a1622f-7da7-5c77-3303-d850bd1ab2ed}
- "TabInformation" event
- "FontFace" value is now string font from settings
4. What keybindings do people choose to customize (Add or Remove)? (Are there extremely common keys that folks bind or unbind that we should have adjusted by default in a fresh install?)
- "Microsoft.Windows.Terminal.App" {24a1622f-7da7-5c77-3303-d850bd1ab2ed}
- "CustomKeybindings" event
- "Keybindings" value is the entire JSON segment that describes the user keybindings from `settings.json`.
5. Do people change their default profile from the PowerShell one we set? If so, to what? (Should we not set PowerShell as the default? Should we adjust the ranking of our dynamic generators to favor the most popular ones to bubble to the top?)
- "Microsoft.Windows.Terminal.App" {24a1622f-7da7-5c77-3303-d850bd1ab2ed}
- "CustomDefaultProfile" event
- "DefaultProfile" value is the GUID of the chosen profile
## Validation Steps Performed
1. Implemented the events
2. Launched the ETL channel viewer
3. Triggered the events
4. Saw the data come out
The Terminal would crash when closing it when there are multiple tabs
open. This was due to `TerminalPage` attempting to select a nonexistent
tab.
The block of code that was removed was causing issues when trying to
close all tabs at once. The way we close all our tabs in
`_CloseAllTabs()` was by repeatedly calling
`_RemoveTabViewItemByIndex(0)` until `_tabs.Size() == 0`. The problem
was that `_RemoveTabViewItemByIndex` would eventually call a coroutine
to set the next tab as the `SelectedItem` after removing a tab. The
coroutine would then pass control back to `_CloseAllTabs()` to finish
its loop, and by the time the coroutine resumes control, `_tabs` and
`TabView().TabItems()` would both be empty and it would crash attempting
to focus a tab.
Luckily, the functionality that this block of code provided is really no
longer needed . This code was used to focus on the next tab after
closing a tab. This might have been written way back when TabView
didn't have this functionality built in. It seems now that after
removing a `TabItem` from the `TabView`, the `SelectedItem` of the
TabView automatically updates, making this block of code unnecessary.
## Validation Steps Performed
Did a lot of multiple tab open and closings and closing the window after
opening a ton of tabs. No crashes seem to occur anymore!
Test cases still pass.
Closes#4482
The UIA Provider now scrolls the viewport when necessary. This just fills in the missing virtual function in Terminal to have the same behavior as what it does in ConHost.
* [X] Closes#2361
* [X] CLA signed.
`ChangeViewport` is now a virtual function at the `ScreenInfoUiaProvider` layer to have access to the TermControl.
In ConHost, we pass this call up to the WindowUiaProvider layer. In Terminal, we don't need to do that because the concept of updating the viewport is handled at the TermControl layer. So we just call that function and _voila_!
## Summary of the Pull Request
Forgot to include the scaling factor. Also went ahead and used chromium math for this portion.
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#2551
* [x] CLA signed.
## Validation Steps Performed
Tested on 200% display and 100% display. Rects are aligned on both.
## Summary of the Pull Request
This is a fix that technically was caused by #357, though we didn't have the Terminal at the time, so I only fixed conhost then. When a client app prints the very last column in the buffer, the cursor is often not _actually_ moved to the next row quite yet. The cursor usually just "floats" on the last character of the row, until something happens. This could be a printable character, which will print it on the next line, or a newline, which will move the cursor to the next line manually, or it could be a backspace, which might take the cursor back a character.
Conhost and gnome-terminal behave slightly differently here, and wt behaves differently all together. Heck, conhost behaves differently depending on what output mode you're in.
The scenario in question is typing a full row of text, then hitting backspace to erase the last char of the row.
What we were emitting before in this case was definitely wrong - we'd emit a space at that last row, but then not increment our internal tracker of where the cursor is, so the cursor in conpty and the terminal would be misaligned. The easy fix for this is to make sure to always update the `_lastText` member appropriately. This is the `RightExclusive` change.
The second part of this change is to not be so tricksy immediately following a "delayed eol wrap". When we have just printed the last char like that, always use the VT sequence CUP the next time the cursor moves. Depending on the terminal emulator and it's flags, performing a BS in this state might not bring the cursor to the correct position.
## References
#405, #780, #357
## PR Checklist
* [x] Closes#1245
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
With the impending #405 PR I have, this still works, but the sequences that are emitted change, so I didn't write a test for this currently.
## Validation Steps Performed
Tried the scenario for both #357 and #1245 in inception, `gnome-temrinal` and `wt` all, and they all display the cursor correctly.
## Summary of the Pull Request
In UIA Providers, update the concept of the size of the text buffer to just go down to the virtual bottom. This significantly increases performance to the point that it can even be used in the Debug build.
## PR Checklist
* [x] Closes#4485
* [x] CLA signed.
## Detailed Description of the Pull Request / Additional comments
We already actually have this concept exposed to us via the IUiaData. So we're just leveraging that and putting it in a helper function `_getBufferSize()`.
## Validation Steps Performed
Tested word nav on Narrator (previously hung). Now it works on the Debug build. Previously, using the release build was necessary to be able to test this feature.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes a bug where scrolling up/down doesn't update the viewport after the window is resized and in other cases. Also changes other things, please read the detailed description.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#1494
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
There are two ways scroll can happen:
- the user scrolls using the scroll bar and the `Terminal` is notified
- the `Terminal` changed the viewport and the scroll bar is updated to reflect the change
The code to notify the `Terminal` that the user scrolled is in the event handler for when the scroll bar's value changes. However this poses a problem because it means that when the `Terminal` changes the viewport, the scroll bar is updated so it would then also notify the `Terminal` that the scroll changed. But it already knows because it's coming from itself!
To fix this, the `TermControl` class had a member called `_lastScrollOffset` that would be set when the `Terminal` decides to change the viewport so that the event handler for the scroll bar could check the new scroll value against `_lastScrollOffset` and if it matches, then everything is fine and there is nothing to update.
This is what happens when the `Terminal` changes the viewport:
1. set `_lastScrollOffset`
2. dispatch job on the UI thread: update the scrollbar which is going to call the event handler which is going to check for `_lastScrollOffset` and clear it
There are two bugs introduced by this approach:
1. (I am not sure about this.) The dispatcher appears to store jobs in a LIFO stack so it sometimes reorders the "update the scrollbar" jobs when there are too many. When I run `1..10000` on PowerShell, then I get this from the event handler (format: `_lastScrollOffset newValue`):
```
8988 8988
8989 8989
8990 8990
8992 8991
8993 8992
...
9001 8997
9001 8998
9001 8999
9001 9000
9001 9001
9001 8985
9001 8968
9001 8953
...
9001 7242
9001 7226
9001 7210
```
This causes the following issues:
1. `_lastScrollOffset` wouldn't be reset because it wouldn't be equal to the current scroll bar value (see example above) so the next scrolls wouldn't do anything as the event handler would still be waiting for an event with the good scroll bar value which would never happen because it happened earlier
2. the `TermControl` would notify the `Terminal` about its own scroll
2. If the `Terminal` didn't actually changed its viewport but still called the `TermControl::_TerminalScrollPositionChanged` method, then it would set the `_lastScrollOffset` member as usual but the scroll bar value change event handler would not be called because it is only called when the value actually changes so the `_lastScrollOffset` member wouldn't be cleared and subsequent scroll bar value change events would be ignored because again the event handler would still be waiting for an event with the good scroll bar value which would never happen. This is actually the reason for #1494: when the window is resized, the `Terminal` will call `TermControl::_TerminalScrollPositionChanged` even if the scroll position didn't actually change (444de5b166/src/cascadia/TerminalCore/Terminal.cpp (L183)). Maybe this should also be fixed in another PR?
I replaced `_lastScrollOffset` by a flag `_isTerminalInitiatedScroll`. I set the flag just before and unset it just after the terminal changes the scrollbar on the UI thread to eliminate the race conditions and the bug when the scroll bar's value doesn't actually change.
Other changes:
- I also fixed a potential bug where if the user scrolls just after the terminal updates the viewport, it would en up ignoring the user scroll. To do this, when the user scrolls, I cancel any update with `_willUpdateScrollBarToMatchViewport`.
- I also removed the original `ScrollViewport` method because it was not used anywhere and I think it can potentially create confusion (and therefore bugs) because this method updates the viewport but not the scroll bar unlike `KeyboardScrollViewport` which functions as you would expect. I then renamed `KeyboardScrollViewport` into `ScrollViewport`. So, now, there is only one method to scroll the viewport from the `TermControl`. Please, tell me if this shouldn't be in this PR.
- I also removed `_terminal->UserScrollViewport(viewTop);` in the `KeyboardScrollViewport` method because it will be updated later anyways in the scroll bar's value change event handler because of the `_scrollBar.Value(viewTop);`.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I tested manually by doing this:
- For bug 1:
1. Start the terminal
2. Run the `1..30000` command in PowerShell and wait for it to end (maybe more if you have a fast computer?)
3. Hold left click on the scrollbar slider and start moving it
- For bug 2:
1. Start the terminal
2. Run the `1..100` command in PowerShell and wait for it to end
3. Resize the window horizontally
4. Hold left click on the scrollbar slider and start moving it
Without this patch, the viewport doesn't update.
With the patch, the viewport updates correctly.
## Summary of the Pull Request
Despite being specified as `noexcept`, `FillConsoleOutputCharacterA` emits an exception when a call to `ConvetToW` is made with an argument character which can't be converted. This PR fixes this throw, by wrapping `ConvertToW` in a try-catch_return.
## PR Checklist
* [x] Closes#4258
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed: thanks @miniksa
## Detailed Description of the Pull Request / Additional comments
Following the semantics of other `FillConsoleOutputCharacter*` the output param `cellsModified` is set to `0`. The try-catch_return is also what other functions of this family perform in case of errors.
## Validation Steps Performed
Original repro no longer crashes.
Generated by https://github.com/jsoref/spelling `f`; to maintain your repo, please consider `fchurn`
I generally try to ignore upstream bits. I've accidentally included some items from the `deps/` directory. I expect someone will give me a list of items to drop, I'm happy to drop whole files/directories, or to split the PR into multiple items (E.g. comments/locals/public).
Closes#4294
In debug builds that haven't been LTO'd or had unused refs removed,
there will still be a spurious reference to api-ms-win-winrt-core (or
something similar.)
In release builds, that reference is gone.
Fixes#4519.
## Summary of the Pull Request
Conpty doesn't need `CSI 3 J`, it doesn't have a scrollback. The terminal that's connected should use that. This makes conpty pass it through, like other sequences that conpty has no need for.
## References
## PR Checklist
* [x] Closes#2715
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
This fixes a crash caused by Narrator starting *before* terminal.
Fixes#2907.
For context,
```
// We must initialize the main thread as a single-threaded apartment before
// constructing any Xaml objects. Failing to do so will cause some issues
// in accessibility somewhere down the line when a UIAutomation object will
// be queried on the wrong thread at the wrong time.
// We used to initialize as STA only _after_ initializing the application
// host, which loaded the settings. The settings needed to be loaded in MTA
// because we were using the Windows.Storage APIs. Since we're no longer
// doing that, we can safely init as STA before any WinRT dispatches.
```
Moves the tests from using the `vstest.console.exe` route to just using `te.exe`.
PROs:
- `te.exe` is significantly faster for running tests because the TAEF/VSTest adapter isn't great.
- Running through `te.exe` is closer to what our developers are doing on their dev boxes
- `te.exe` is how they run in the Windows gates.
- `te.exe` doesn't seem to have the sporadic `0x6` error code thrown during the tests where somehow the console handles get lost
- `te.exe` doesn't seem to repro the other intermittent issues that we have been having that are inscrutable.
- Fewer processes in the tree (te is running anyway under `vstest.console.exe`, just indirected a lot
- The log outputs scroll live with all our logging messages instead of suppressing everything until there's a failure
- The log output is actually in the order things are happening versus vstest.
CONs:
- No more code coverage.
- No more test records in the ADO build/test panel.
- Tests really won't work inside Visual Studio at all.
- The log files are really big now
- Testing is not a test task anymore, just another script.
Refuting each CON:
- We didn't read the code coverage numbers
- We didn't look at the ADO test panel results or build-over-build velocities
- Tests didn't really work inside Visual Studio anyway unless you did the right incantations under the full moon.
- We could tone down the logging if we wanted at either the te.exe execution time (with a switch) or by declaring properties in the tests/classes/modules that are very verbose to not log unless it fails.
- I don't think anyone cares how they get run as long as they do.
## Summary of the Pull Request
This PR will make the existing `Tab` class into a WinRT type. This will allow any XAML to simply bind to the `ObservableVector` of Tabs.
This PR will be followed up with a future PR to change our TabView to use the ObservableVector, which will in turn eliminate the need for maintaining two vectors of Tabs. (We currently maintain `_tabs` in `TerminalPage` and we also maintain `TabView().TabViewItems()` at the same time as described here: #2740)
## References
#3922
## PR Checklist
* [x] CLA signed.
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
I've currently only exposed a Tab's Title and IconPath to keep things simple. I foresee XAML elements that bind to Tabs to only really need these two properties for displaying.
I've also converted `TerminalPage`'s `std::vector<std::shared_ptr> _tabs` into a `IObservableVector<winrt::TerminalPage::Tab> _tabs` just so that future PRs will have the ground set for binding to this vector of tabs.
## Validation Steps Performed
Played around with Tabs and Panes and all sorts of combinations of keybindings for interacting with tabs and dragging and whatnot, it all seemed fine! Tab Tests also all pass.
pwsh parent process has been changed, confirmations in the replies to the referenced tweet.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Description
Updating documentation to reflect changes in pwsh parent process.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [x] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Replace `utf8Parser` with `til::u8u16` in order to have the same
conversion algorithms used in terminal and conhost.
This PR addresses item 2 in this list:
1. ✉ Implement `til::u8u16` and `til::u16u8` (done in PR #4093)
2. ✔ **Unify UTF-8 handling using `til::u8u16` (this PR)**
2.1. ✔ **Update VtInputThread::_HandleRunInput()**
2.2. ✔ **Update ApiRoutines::WriteConsoleAImpl()**
2.3. ❌ (optional / ask the core team) Remove Utf8ToWideCharParser from the code base to avoid further use
3. ❌ Enable BOM discarding (follow up)
3.1. ❌ extend `til::u8u16` and `til::u16u8` with a 3rd parameter to enable discarding the BOM
3.2. ❌ Make use of the 3rd parameter to discard the BOM in all current function callers, or (optional / ask the core team) make it the default for `til::u8u16` and `til::u16u8`
4. ❌ Find UTF-16 to UTF-8 conversions and examine if they can be unified, too (follow up)
Closes#4086Closes#3378
## Summary of the Pull Request
This adds support for the [`DECAWM`](https://vt100.net/docs/vt510-rm/DECAWM) private mode escape sequence, which controls whether or not the output wraps to the next line when the cursor reaches the right edge of the screen. Tested manually, with [Vttest](https://invisible-island.net/vttest/), and with some new unit tests.
## PR Checklist
* [x] Closes#3826
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #3826
## Detailed Description of the Pull Request / Additional comments
The idea was to repurpose the existing `ENABLE_WRAP_AT_EOL_OUTPUT` mode, but the problem with that was it didn't work in VT mode - specifically, disabling it didn't prevent the wrapping from happening. This was because in VT mode the `WC_DELAY_EOL_WRAP` behaviour takes affect, and that bypasses the usual codepath where `ENABLE_WRAP_AT_EOL_OUTPUT` is checked,
To fix this, I had to add additional checks in the `WriteCharsLegacy` function (7dbefe06e41f191a0e83cfefe4896b66094c4089) to make sure the `WC_DELAY_EOL_WRAP` mode is only activated when `ENABLE_WRAP_AT_EOL_OUTPUT` is also set.
Once that was fixed, though, another issue came to light: the `ENABLE_WRAP_AT_EOL_OUTPUT` mode doesn't actually work as documented. According to the docs, "if this mode is disabled, the last character in the row is overwritten with any subsequent characters". What actually happens is the cursor jumps back to the position at the start of the write, which could be anywhere on the line.
This seems completely broken to me, but I've checked in the Windows XP, and it has the same behaviour, so it looks like that's the way it has always been. So I've added a fix for this (9df98497ca38f7d0ea42623b723a8e2ecf9a4ab9), but it is only applied in VT mode.
Once that basic functionality was in place, though, we just needed a private API in the `ConGetSet` interface to toggle the mode, and then that API could be called from the `AdaptDispatch` class when the `DECAWM` escape sequence was received.
One last thing was to reenable the mode in reponse to a `DECSTR` soft reset. Technically the auto wrap mode was disabled by default on many of the DEC terminals, and some documentation suggests that `DECSTR` should reset it to that state, But most modern terminals (including XTerm) expect the wrapping to be enabled by default, and `DECSTR` reenables that state, so that's the behaviour I've copied.
## Validation Steps Performed
I've add a state machine test to confirm the `DECAWM` escape is dispatched correctly, and a screen buffer test to make sure the output is wrapped or clamped as appropriate for the two states.
I've also confirmed that the "wrap around" test is now working correctly in the _Test of screen features_ in Vttest.
## Summary of the Pull Request
Upgrades the `InputStateMachineEngine` to take SGR Mouse VT Sequences and translate them into `MOUSE_EVENT_RECORDS`.
## References
https://docs.microsoft.com/en-us/windows/console/mouse-event-record-strhttps://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h3-Extended-coordinates#376
## PR Checklist
* [X] Contributes to #376
* [X] CLA signed.
* [X] Tests added/passed
* [ ] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
### Modifications to `InputStateMachineEngine`
I introduced various enum types...
- `CsiIntermediateCodes`: our supported intermediate codes. Currently only `<`
- `CsiEndCodes`: the last code used for SGR Mouse Mode
- `CsiMouseButtonCodes`: which button was pressed. Mutually exclusive. Buttons beyond button 11 are ambiguous.
- `CsiMouseModifierCodes`: bitfield of modifiers active for SGR Mouse Mode.
`CsiIntermediateCodes` is used first in `ActionCsiDispatch` to detect the VT Sequence. This kicks off a chain of function calls...
- `_GetXYPosition()`: figure out where the mouse was clicked
- `_UpdateSGRMouseButtonState`: read in what we found and update our internal state
- `_WriteMouseEvent()`: generate an INPUT_RECORD and send it off
### Modifications to Testing Suite
read below.
Also, made the test state a globally accessible/modifiable variable.
## Validation Steps Performed
Added tests that cover...
- button clicks
- button clicks with modifiers
- mouse movement
- mouse movement and entering/exiting a state where multiple buttons were pressed
GetBoundingRect() has inclusive endpoints. I previously assumed end was exclusive so I drew the bounding rect wrong.
This also means that we should allow start and end to be the same. Which means that FailFastIf would get hit...
[Git2Git] Merged PR 4264676: Guards the exceptions from PaintFrameForEngine to head off the Watsons
Guards the exceptions from PaintFrameForEngine to head off the Watsons.
This will just enable it to retry again later. There's no real reason for it to crash and exceptions should never have left this function, so I made it noexcept as well.
Related work items: #21270995 Retrieved from official/rs_onecore_dep_uxp 08f8855377bde6d05fade032335fedf4d1387de2
Related work items: #21270995
Moved `FindText` to `UiaTextRangeBase`. Now that Search is a shared component (thanks #3279), I can just reuse it basically as-is.
#3279 - Make Search a shared component
#4018 - UiaTextRange Refactor
I removed it from the two different kinds of UiaTextRange and put it in the base class.
I needed a very minor change to ensure we convert from an inclusive end (from Search) to an exclusive end (in UTR).
Worked with `FindText` was globally messed with in windows.h. So we had to do a few weird things there (thanks Michael).
No need for additional tests because it _literally_ just sets up a Searcher and calls it.
## Summary of the Pull Request
When dragging _DEBUG_ conhost across a DPI boundary, we'd crash. This doesn't repro for some reason on Release builds. Maybe @miniksa can share some light why that is.
## PR Checklist
* [x] Closes#4012
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Dragged it across the boundary again, doesn't crash anymore 🙏
## Summary of the Pull Request
This pull request is intended to achieve the following goals...
1) reduce duplicate code
2) remove static functions
3) improve readability
4) improve reliability
5) improve code-coverage for testing
6) establish functioning text buffer navigation in Narrator and NVDA
This also required a change to the wrapper class `XamlUiaTextRange` that has been causing issues with Narrator and NVDA.
See below for additional context.
## References
#3976 - I believe this might have been a result of improperly handling degenerate ranges. Fixed here.
#3895 - reduced the duplicate code. No need to separate into different files
#2160 - same as #3976 above
#1993 - I think just about everything is no longer static
## PR Checklist
* [x] Closes#3895, Closes#1993, Closes#3976, Closes#2160
* [x] CLA signed
* [x] Tests added/passed
## Detailed Description of the Pull Request / Additional comments
### UiaTextRange
- converted endpoints into the COORD system in the TextBuffer coordinate space
- `start` is inclusive, `end` is exclusive. A degenerate range is when start == end.
- all functions are no longer static
- `MoveByUnit()` functions now rely on `MoveEndpointByUnit()` functions
- removed unnecessary typedefs like `Endpoint`, `ScreenInfoRow`, etc..
- relied more heavily on existing functionality from `TextBuffer` and `Viewport`
### XamlUiaTextRange
- `GetAttributeValue()` must return a special HRESULT that signifies that the requested attribute is not supported. This was the cause of a number of inconsistencies between Narrator and NVDA.
- `FindText()` should return `nullptr` if nothing was found. #4373 properly fixes this functionality now that Search is a shared module
### TextBuffer
- Word navigation functionality is entirely in `TextBuffer` for proper abstraction
- a total of 6 functions are now dedicated to word navigation to get a good understanding of the differences between a "word" in Accessibility and a "word" in selection
As an example, consider a buffer with this text in it:
" word other "
In selection, a "word" is defined as the range between two delimiters, so the words in the example include [" ", "word", " ", "other", " "].
In accessibility , a "word" includes the delimiters after a range of readable characters, so the words in the example include ["word ", "other "].
Additionally, accessibility word navigation must be able to detect if it is on the first or last word. This resulted in a slight variant of word navigation functions that return a boolean instead of a COORD.
Ideally, these functions can be consolidated, but that is too risky for a PR of this size as it can have an effect on selection.
### Viewport
- the concept of `EndExclusive` is added. This is used by UiaTextRange's `end` anchor as it is exclusive. To signify that the last character in the buffer is included in this buffer, `end` must be one past the end of the buffer. This is `EndExclusive`
- Since many functions check if the given `COORD` is in bounds, a flag must be set to allow `EndExclusive` as a valid `COORD` that is in bounds.
### Testing
- word navigation testing relies more heavily on TextBuffer tests
- additional testing was created for non-movement focused functions of UiaTextRange
- The results have been compared to Microsoft Word and some have been verified by UiAutomation/Narrator contacts as expected results.
## Validation Steps Performed
Tests pass
Narrator works
NVDA works
This pull request teaches the PowerShell Core generator about a bunch of different locations in which it might find a PowerShell.
These instances will be sorted, a leader will be elected, and that leader will be promoted and given the vaunted title of "PowerShell".
Names will be generated for the rest.
The sort order is documented in the comments, but that comment will be replicated here:
```
// <-- Less Valued .................................... More Valued -->
// | All instances of PS 6 | All PS7 |
// | Preview | Stable | ~~~ |
// | Non-Native | Native | Non-Native | Native | ~~~ |
// | Trd | Pack | Trd | Pack | Trd | Pack | Trd | Pack | ~~~ |
// (where Pack is a stand-in for store, scoop, dotnet, though they have their own orders,
// and Trd is a stand-in for "Traditional" (Program Files))
```
Closes#2300
This PR addresses the following two issues:
#4203: If a selection is active, a <kbd>shift</kbd>-LeftClick will set the SelectionEnd to where the pointer is.
#3911: Currently, any keypress will clear selection, and will pass through to the terminal. This PR will make it so that if a selection is active, _any_ keypress will clear the selection and then any keypress _except_ <kbd>esc</kbd> will pass through to the terminal.
## PR Checklist
* [x] Closes#4203; Closes#3911
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
## Validation Steps Performed
Played around a whole bunch with shift-clicking selections and regular clicking selections.
Also played around with selections and dismissing with all sorts of keypresses and keychords.
Tests all pass still!
Fixes#4155.
## Validation steps
```
Summary: Total=23, Passed=22, Failed=1, Blocked=0, Not Run=0, Skipped=0
```
The failing test is the same one as before. It is not germane to this pull request.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
So this PR adds a profile setting called "confirmCloseAllTabs", that allows one to enable or disable the "Do you want close all tabs?" dialog that appears when you close a window with multiple open tabs. It current defaults to "true". Also adds a checkbox to that dialog that also sets "confirmCloseAllTabs"
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#3883
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
I added a checkbox to the close dialog to set this setting, but I'm not sure how to best go about actually changing the setting from code; am open to suggestions, as to how it should be done, or if I should also just remove it and stick with the profile setting.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
1. Set "confirmCloseAllTabs" to false in my profile.json file.
2. Opened a 2nd tab.
3. Closed the window
4. Observed that there was no confirmation before the window closed.
5. Set "confirmCloseAllTabs" to true
6. Repeat steps 2 and 3
7. Observe that there was a confirmation before the window closed.
This commit also fixes default buttons and default button styling
in all other dialogs and properly hooks up ESC and Enter for the
Close dialog.
Closes#4307.
Closes#3379.
We were overriding the button foreground and the placeholder foreground using our
own custom resource names. They didn't exist in HC.
Instead of making them exist in HC, I made us use and override the real resource
names. Those ones have HC colors defined by the platform!
Fixes#4393.
## Summary of the Pull Request
This is a pair of related fixes to conpty. For both of these bugs, the root cause was that the cursor was getting set to Off in conpty. Without the `CursorBlinkerTimer`, the cursor would remain off, and frames that only had cursor movements would not update the cursor position in the terminal.
## References
## PR Checklist
* [x] Closes#4102
* [x] Closes#2642
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Recall that there's a bunch of cursor state that's hard to parse without looking up:
* `Visibility` This controls whether the cursor is visible _at all_, regardless if it's been blinked on or off
* `Blinking` controls whether the blinker timer should do something, or leave the cursor alone.
* `IsOn`: When the cursor is blinking, this alternates between true and false.
The trick here is that we only `TriggerCursorMoved` when the cursor is `On`, and there are some scenarios where the cursor is manually set to off.
Fundamentally, these two bugs are similar cases, but they are triggered by different things:
* #2642 was caused by `DoSrvPrivateAllowCursorBlinking(false)` (`^[[?12l`) also manually turning the cursor off.
* #4102 was caused by the client calling `SetConsoleScreenBuffer` to change the active buffer. `win-curses` actually uses that API instead of the alt buffer.
## Summary of the Pull Request
I took the code from conhost that handles this and just copy-pasted it into the terminal codebase.
## References
Original conhost code:
027f1228cb/src/interactivity/win32/windowproc.cpp (L854-L889)
## PR Checklist
* [x] Closes#904
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
Okay it was a little more complicated than that. I had `IslandWindow` handle the drop, which then raises a generic event for `AppHost` to handle. `AppHost` handles this by writing the path as input to the terminal, traversing `AppLogic`, `TerminalPage` and finally landing in `TermControl`
## Validation Steps Performed
Tested manually with both paths with and without spaces.
This commit fixes an issue where "wt -d C: wsl -d Alpine" would be
parsed as "wt -d C: -d Alpine wsl" and rejected as invalid due to the
repeated -d. It also fixes support for the option parsing terminator,
--, in all command lines.
Fixes#4277.
## Summary of the Pull Request
This PR removes all of the VT-specific functionality from the `WriteCharsLegacy` function that dealt with control characters, since those controls are now handled in the state machine when in VT mode. It also removes most of the control character handling from the `Terminal::_WriteBuffer` method for the same reason.
## References
This is a followup to PR #4171
## PR Checklist
* [x] Closes#3971
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [x] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: https://github.com/microsoft/terminal/issues/780#issuecomment-570287435
## Detailed Description of the Pull Request / Additional comments
There are four changes to the `WriteCharsLegacy` implementation:
1. The `TAB` character had special case handling in VT mode which is now no longer required. This fixes a bug in the Python REPL editor (when run from a cmd shell in Windows Terminal), which would prevent you tabbing past the end of the line. It also fixes#3971.
2. Following on from point 1, the `WC_NONDESTRUCTIVE_TAB` flag could also now be removed. It only ever applied in VT mode, in which case the `TAB` character isn't handled in `WriteCharsLegacy`, so there isn't a need for a non-destructive version.
3. There used to be special case handling for a `BS` character at the beginning of the line when in VT mode, and that is also no longer required. This fixes an edge-case bug which would prevent a glyph being output for code point 8 when `ENABLE_PROCESSED_OUTPUT` was disabled.
4. There was quite a lot of special case handling for control characters in the "end-of-line wrap" implementation, which is no longer required. This fixes a bug which would prevent "low ASCII" characters from wrapping when output at the end of a line.
Then in the `Terminal::_WriteBuffer` implementation, I've simply removed all control character handling, except for `LF`. The Terminal is always in VT mode, so the control characters are always handled by the state machine. The exception for the `LF` character is simply because it doesn't have a proper implementation yet, so it still passes the character through to `_WriteBuffer`. That will get cleaned up eventually, but I thought that could wait for a later PR.
Finally, with the removal of the VT mode handling in `WriteCharsLegacy`, there was no longer a need for the `SCREEN_INFORMATION::InVTMode` method to be publicly accessible. That has now been made private.
## Validation Steps Performed
I've only tested manually, making sure the conhost and Windows Terminal still basically work, and confirming that the above-mentioned bugs are fixed by these changes.
## Summary of the Pull Request
#4354 is a pretty complicated PR. It's got a bunch of conpty changes, but what it also has was some critical improvements to the roundtrip test suite. I'm working on some other bugfixes in the same area currently, and need these tests enhancements in those branches _now_. The rest of #4354 is complex enough that I don't trust it will get merged soon (if ever). However, these fixes _should_ be in regardless.
## PR Checklist
* [x] Taken directly from #4354
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is four main changes:
* Enable conpty to be fully enabled in unittests. Just setting up a VT renderer isn't enough to trick the host into being in conpty mode - it also needs to have some other flags set.
* Some minor changes to `CommonState` to better configure the common test state for conpty
* Move some of the verify helpers from `ConptyRoundtripTests` into their own helper class, to be shared in multiple tests
* Add a `TerminalBufferTests` class, for testing the Terminal buffer directly (without conpty).
This change is really easier than
would suggest, I promise.
[Git2Git] Merged PR 4177564: Use CopyTo when returning WindowUiaProvider child to ensure proper ref count
`WindowUiaProvider` was giving up copies of the pointer to its child `ScreenInfoUiaProvider` without `AddRef`ing them. This means that the receiver of those pointers was `Release`ing them at some later time, causing the internal count to decrement, sometimes all the way to zero.
The crash occurs when a `Signal` comes in and `WindowUiaProvider` attempts to resolve it through `ScreenInfoUiaProvider` but it is already gone because it has been `Release`d all the way to 0 (despite the pointer still being held by `WindowUiaProvider`). The crash then manifests in a bunch of different stacks depending on what part of `ScreenInfoUiaProvider` gets the most unlucky at executing through the now uninitialized memory.
I searched the codebase for more instances of `*ppProvider` and assignments of bare pointers. @<Carlos Zamora> appears to have already got nearly all of them in a previous refactoring operation to prepare our classes to use `WRL` more broadly. These were the only two I could find remaining.
Related work items: #24409562 Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp b6008a49c9ce109869ed43ca4e68ceddbad98bc6
Related work items: #24409562
This pull request also includes build break fixes for things that do not build in the OSS repo
and disables the retro terminal effect in conhost.
Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp f10445678e59197c1ae2ee29d8f009c9607c4e5d
Related work items: #24387718
[Git2Git] Git Train: Merge of building/rs_onecore_dep_uxp/190804-1600 into official/rs_onecore_dep_uxp Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_uxp 22945cd6ead96a82fc5c5d21015ed32fc6b77f4b
Related work items: #18974333
[Git2Git] Git Train: FI of official/rs_onecore_dep into official/rs_onecore_dep_acioss Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_acioss 9638166d8c8374081a2aa8b8f9ecabf2bae0df0a
Related work items: #18974333
[Git2Git] Git Train: FI of official/rs_onecore_dep into official/rs_onecore_dep_acioss Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_acioss 6fa4fbe485365ed72be2f557621fe58d4fc75197
Related work items: #18974333
[Git2Git] Merged PR 3344233: Fix build warnings and namespace issues introduced by GitHub merge
Related work items: #18974333 Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_acioss 76d61f82da64f58b615a9a7f1528f0e55443777e
Related work items: #18974333
Change ParseNext function in UTF16 parser to never yield invalid data… (GH1129)
The solution here isn't perfect and isn't going to solve all of our problems. I was basically trying to stop the crash while not getting in the way of the other things coming down the pipe for the input channels.
I considered the following:
1. Remove the fail fast assertion from the buffer
- I didn't want to do this because it really is invalid to get all the way to placing the text down into the buffer and then request a string of 0 length get inserted. I feel the fail fast is a good indication that something is terribly wrong elsewhere that should be corrected.
2. Update the UTF16 parser in order to stop returning empty strings
- This is what I ultimately did. If it would ever return just a lead, it returns �. If it would ever return just a trail, it returns �. Otherwise it will return them as a pair if they're both there, or it will return a single valid codepoint. I am now assuming that if the parse function is being called in an Output Iterator and doesn't contain a string with all pieces of the data that are needed, that someone at a higher level messed up the data, it is in valid, and it should be repaired into replacements.
- This then will move the philosophy up out of the buffer layer to make folks inserting into the buffer identify half a sequence (if they're sitting on a stream where this circumstance could happen... one `wchar_t` at a time) and hold onto it until the next bit arrives. This is because there can be many different routes into the buffer from many different streams/channels. So buffering it low, right near the insertion point, is bad as it might pair loose `wchar_t` across stream entrypoints.
3. Update the iterator, on creating views, to disallow/transform empty strings.
- I considered this solution as well, but it would have required, under some circumstances, a second parsing of the string to identify lead/trail status from outside the `Utf16Parser` class to realize when to use the � character. So I avoided the double-parse.
4. Change the cooked read classes to identify that they pulled the lead `wchar_t` from a sequence then try to pull another one.
- I was going to attempt this, but @adiviness said that he tried it and it made all sorts of other weirdness happen with the edit line.
- Additionally, @adiviness has an outstanding series of effort to make cooked read significantly less horrible and disgusting. I didn't want to get in the way here.
5. Change the `GetChar` method off of the input buffer queue to return a `char32_t`, a `wstring_view`, transform a standalone lead/trail, etc.
- The `GetChar` method is used by several different accessors and API calls to retrieve information off of the input queue, transforming the Key events into straight up characters. To change this at that level would change them all. Long-term, it is probably warranted to do so as all of those consumers likely need to become aware of hand ...
Related work items: #20990158
Flush input queue before running test. #1137 (#1139)
Flushes the input queue on RawReadUnpacksCoalescedInputRecords test to ensure that other tests cannot cause failure by leaving extraneous input records behind after they run.
This only failed in the core operating system gate tests. This is because those tests run a subset of the complete test suite (subtracting the ones that do not make sense in a core environment). Apparently one of the tests that was skipped that normally runs prior to the UnpacksCoalesced test ensured that the input queue was clean enough for this test to succeed. But in the core environment, the test that ran prior left stuff behind.
To resolve this, I'm making the Coalesced test more resilient by cleaning out the queue prior to performing its operations.
(Also, bonus, I'm fixing the typo in the name Coalesced.)
This is less complicated/expensive than tracking down the tests that are leaving garbage behind, should prevent issues in the future related to ordering (since the tests run alphabetically, by default), and isn't as expensive as running the test in isolation (with its own conhost stood up for just the one test.)
Validated by running te.exe Microsoft.Console.Host.FeatureTests.dll /name:*InputTests* against a core operating system variant. Prior to change, this test failed. After the change, this test succeeded.
This will be automatically double-checked by the gates run after check-in.
[Git2Git] Merged PR 3330475: Synchronize the font between the WDDMCon Renderer and the SCREEN_INFORMATION
Synchronize the font between the WDDMCon Renderer and the SCREEN_INFORMATION when the OneCore Interactivity library starts up. #21717424
Related work items: #21717424 Retrieved from https://microsoft.visualstudio.com os OS official/rs_onecore_dep_acioss ccca0315e7db34c09f5fcd9dfabae666ede1687b
Related work items: #21717424
Even wil::com_ptr_nothrow can still inadvertantly throw an 'access violation exception' when null pointer deref-ing (WIL won't check if it's null before attempting, CComQIPtr apparently didn't care.
Related work items: #21776133, #21781836
* cfc72cee (origin/dev/duhowett/ibxint, github/master) Make sure cursor blinks after opening new tab (1030)
* 9ad25440Fix#936: misuse of uninitialized objects causes AppVerifier breaks on Windows Terminal startup (1015)
* 5f938a04 Update Terminal.cpp (1034)
* 4c47631b Cleanup - termDispatch.hpp & adaptDispatch.hpp overrides (1004)
* cc304759 add audit mode to ci (948)
* 80f10796 Fix the bell sound when Alt+key is pressed. (1006)
* 42e87ed3 fix build break from using `await` instead of `co_await` (1009)
* 40b557a4 Update manifest to correct 1903 version, unref param fix (1008)
* 0f62ec81 Eat all tap keypresses no matter what. (985)
* ce0eaab9 inbox: Merge accumulated build fixes from RS_ONECORE_DEP_ACIOSS (1002)
* 1c509683 add .editorconfig file (585)
* efd69990 Add support for OSC 10 and 11 to set the default colors (891)
Related work items: #21610659, #21838182
[Git2Git] Git Train: Merge of building/rs_onecore_dep_acioss/190523-1700 into official/rs_onecore_dep_acioss Retrieved from official/rs_onecore_dep_acioss 3fceea90bee761aa93d91c0184a7217d1e2d404b
Related work items: #18974333
Fix a bunch of static analysis issues (GH553)
* static analysis fixes
* using C++ style casts
* explicit delete changed to reset(nullptr)
* fix for null apiMsg.OtherId during tracing in Compare()
* changed INVALID_ID macro to constexpr
* properly handle null ReplyMsg in ConsoleIoThread()
* Fixed wrong static_cast for State.InputBuffer
* compensate for null reply message to fix deref problem of ReplyMsg in srvinit.cpp by changing signature in DeviceComm.h
Related work items: #21767097
[Git2Git] Merged PR 3285709: Add chafa resource into the DLL built by Windows Razzle #21439265
Add chafa resource into the DLL built by Windows Razzle #21439265
2019-05-21 00:01:52 +00:00
3177 changed files with 289845 additions and 90698 deletions
1. If I delete this entire template and go my own path, the core team may close my issue without further explanation or engagement.
2. If I list multiple bugs/concerns in this one issue, the core team may close my issue without further explanation or engagement.
3. If I write an issue that has many duplicates, the core team may close my issue without further explanation or engagement (and without necessarily spending time to find the exact duplicate ID number).
4. If I leave the title incomplete when filing the issue, the core team may close my issue without further explanation or engagement.
5. If I file something completely blank in the body, the core team may close my issue without further explanation or engagement.
All good? Then proceed!
-->
<!--
This bug tracker is monitored by Windows Terminal development team and other technical folks.
**Important: When reporting BSODs or security issues, DO NOT attach memory dumps, logs, or traces to Github issues**.
Instead, send dumps/traces to secure@microsoft.com, referencing this GitHub issue.
If this is an application crash, please also provide a Feedback Hub submission link so we can find your diagnostic data on the backend. Use the category "Apps > Windows Terminal (Preview)" and choose "Share My Feedback" after submission to get the link.
Please use this form and describe your issue, concisely but precisely, with as much detail as possible.
-->
# Environment
```none
Windows build number: [run `[Environment]::OSVersion` for powershell, or `ver` for cmd]
Windows Terminal version (if applicable):
Any other software?
```
# Steps to reproduce
<!-- A description of how to trigger this bug. -->
# Expected behavior
<!-- A description of what you're expecting, possibly containing screenshots or reference material. -->
Please make sure to [search for existing issues](https://github.com/microsoft/terminal/issues) and [check the FAQ](https://github.com/microsoft/terminal/wiki/Frequently-Asked-Questions-(FAQ)) before filing a new one!
If this is an application crash, please also provide a [Feedback Hub](https://aka.ms/terminal-feedback-hub) submission link so we can find your diagnostic data on the backend. Use the category "Apps > Windows Terminal" and choose "Share My Feedback" after submission to get the link.
- type:input
attributes:
label:Windows Terminal version
placeholder:"1.7.3651.0"
description:|
You can copy the version number from the About dialog. Open the About dialog by opening the menu with the "V" button (to the right of the "+" button that opens a new tab) and choosing About from the end of the list.
validations:
required:false
- type:input
attributes:
label:Windows build number
placeholder:"10.0.19042.0"
description:|
Please run `ver` or `[Environment]::OSVersion`.
validations:
required:false
- type:textarea
attributes:
label:Other Software
description:If you're reporting a bug about our interaction with other software, what software? What versions?
placeholder:|
vim 8.2 (inside WSL)
OpenSSH_for_Windows_8.1p1
My Cool Application v0.3 (include a code snippet if it would help!)
validations:
required:false
- type:textarea
attributes:
label:Steps to reproduce
placeholder:Tell us the steps required to trigger your bug.
validations:
required:true
- type:textarea
attributes:
label:Expected Behavior
description:If you want to include screenshots, paste them into the markdown editor below.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
## References and Relevant Issues
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
## PR Checklist
- [ ] Closes #xxx
- [ ] Tests added/passed
- [ ] Documentation updated
- If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
[allow/*.txt](allow/) | Add words to the dictionary | one word per line (only letters and `'`s allowed) | [allow](https://github.com/check-spelling/check-spelling/wiki/Configuration#allow)
[reject.txt](reject.txt) | Remove words from the dictionary (after allow) | grep pattern matching whole dictionary words | [reject](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-reject)
[patterns/*.txt](patterns/) | Patterns to ignore from checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
[candidate.patterns](candidate.patterns) | Patterns that might be worth adding to [patterns.txt](patterns.txt) | perl regular expression with optional comment block introductions (all matches will be suggested) | [candidates](https://github.com/check-spelling/check-spelling/wiki/Feature:-Suggest-patterns)
[line_forbidden.patterns](line_forbidden.patterns) | Patterns to flag in checked lines | perl regular expression (order matters, first match wins) | [patterns](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-patterns)
[expect/*.txt](expect.txt) | Expected words that aren't in the dictionary | one word per line (sorted, alphabetically) | [expect](https://github.com/check-spelling/check-spelling/wiki/Configuration#expect)
[advice.md](advice.md) | Supplement for GitHub comment when unrecognized words are found | GitHub Markdown | [advice](https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice)
Note: you can replace any of these files with a directory by the same name (minus the suffix)
and then include multiple files inside that directory (with that suffix) to merge multiple files together.
<!-- See https://github.com/check-spelling/check-spelling/wiki/Configuration-Examples%3A-advice --> <!-- markdownlint-disable MD033 MD041 -->
<details>
<summary>
:pencil2: Contributor please read this
</summary>
By default the command suggestion will generate a file named based on your commit. That's generally ok as long as you add the file to your commit. Someone can reorganize it later.
If the listed items are:
* ... **misspelled**, then please *correct* them instead of using the command.
* ... *names*, please add them to `.github/actions/spelling/allow/names.txt`.
* ... APIs, you can add them to a file in `.github/actions/spelling/allow/`.
* ... just things you're using, please add them to an appropriate file in `.github/actions/spelling/expect/`.
* ... tokens you only need in one place and shouldn't *generally be used*, you can add an item in an appropriate file in `.github/actions/spelling/patterns/`.
See the `README.md` in each directory for more information.
:microscope: You can test your commits **without***appending* to a PR by creating a new branch with that extra change and pushing it to your fork. The [check-spelling](https://github.com/marketplace/actions/check-spelling) action will run in response to your **push** -- it doesn't require an open pull request. By using such a branch, you can limit the number of typos your peers see you make. :wink:
<details><summary>If the flagged items are :exploding_head: false positives</summary>
If items relate to a ...
* binary file (or some other file you wouldn't want to check at all).
Please add a file path to the `excludes.txt` file matching the containing file.
File paths are Perl 5 Regular Expressions - you can [test](
https://www.regexplanet.com/advanced/perl/) yours before committing to verify it will match your files.
`^` refers to the file's path from the root of the repository, so `^README\.md$` would exclude [README.md](
../tree/HEAD/README.md) (on whichever branch you're using).
# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
# Update Lorem based on your content (requires `ge` and `w` from https://github.com/jsoref/spelling; and `review` from https://github.com/check-spelling/check-spelling/wiki/Looking-for-items-locally )
reply:This issue has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **4 days**. It will be closed if no further activity occurs **within 3 days of this comment**.
- description:
frequencies:
- hourly:
hour:3
filters:
- isIssue
- isOpen
- hasLabel:
label:Resolution-Duplicate
- noActivitySince:
days:1
actions:
- addReply:
reply:This issue has been marked as duplicate and has not had any activity for **1 day**. It will be closed for housekeeping purposes.
- closeIssue
- description:
frequencies:
- hourly:
hour:3
filters:
- isPullRequest
- isOpen
- hasLabel:
label:Needs-Author-Feedback
- hasLabel:
label:No-Recent-Activity
- noActivitySince:
days:7
actions:
- closeIssue
- description:
frequencies:
- hourly:
hour:3
filters:
- isPullRequest
- isOpen
- hasLabel:
label:Needs-Author-Feedback
- noActivitySince:
days:7
- isNotLabeledWith:
label:No-Recent-Activity
actions:
- addLabel:
label:No-Recent-Activity
- addReply:
reply:This pull request has been automatically marked as stale because it has been marked as requiring author feedback but has not had any activity for **7 days**. It will be closed if no further activity occurs **within 7 days of this comment**.
eventResponderTasks:
- if:
- payloadType:Issues
- or:
- and:
- isAction:
action:Opened
- not:
hasLabel:
label:⛺ Reserved
then:
- addLabel:
label:Needs-Triage
description:
- if:
- payloadType:Issue_Comment
- isAction:
action:Created
- isActivitySender:
issueAuthor:True
- hasLabel:
label:Needs-Author-Feedback
then:
- addLabel:
label:Needs-Attention
- removeLabel:
label:Needs-Author-Feedback
description:
- if:
- payloadType:Issues
- not:
isAction:
action:Closed
- hasLabel:
label:No-Recent-Activity
then:
- removeLabel:
label:No-Recent-Activity
description:
- if:
- payloadType:Issue_Comment
- hasLabel:
label:No-Recent-Activity
then:
- removeLabel:
label:No-Recent-Activity
description:
- if:
- payloadType:Pull_Request_Review
- isAction:
action:Submitted
- isReviewState:
reviewState:Changes_requested
then:
- addLabel:
label:Needs-Author-Feedback
description:
- if:
- payloadType:Pull_Request
- isActivitySender:
issueAuthor:True
- not:
isAction:
action:Closed
- hasLabel:
label:Needs-Author-Feedback
then:
- removeLabel:
label:Needs-Author-Feedback
description:
- if:
- payloadType:Issue_Comment
- isActivitySender:
issueAuthor:True
- hasLabel:
label:Needs-Author-Feedback
then:
- removeLabel:
label:Needs-Author-Feedback
description:
- if:
- payloadType:Pull_Request_Review
- isActivitySender:
issueAuthor:True
- hasLabel:
label:Needs-Author-Feedback
then:
- removeLabel:
label:Needs-Author-Feedback
description:
- if:
- payloadType:Pull_Request
- not:
isAction:
action:Closed
- hasLabel:
label:No-Recent-Activity
then:
- removeLabel:
label:No-Recent-Activity
description:
- if:
- payloadType:Issue_Comment
- hasLabel:
label:No-Recent-Activity
then:
- removeLabel:
label:No-Recent-Activity
description:
- if:
- payloadType:Pull_Request_Review
- hasLabel:
label:No-Recent-Activity
then:
- removeLabel:
label:No-Recent-Activity
description:
- if:
- payloadType:Pull_Request
- hasLabel:
label:AutoMerge
then:
- enableAutoMerge:
mergeMethod:Squash
description:
- if:
- payloadType:Pull_Request
- labelRemoved:
label:AutoMerge
then:
- disableAutoMerge
description:
- if:
- payloadType:Issues
- or:
- and:
- isLabeled
- hasLabel:
label:Mass-Chaos
- isOpen
- isLabeled
- not:
hasLabel:
label:Needs-Tag-Fix
- or:
- and:
- not:
hasLabel:
label:Area-Accessibility
- not:
hasLabel:
label:Area-Build
- not:
hasLabel:
label:Area-Extensibility
- not:
hasLabel:
label:Area-Fonts
- not:
hasLabel:
label:Area-Input
- not:
hasLabel:
label:Area-Interaction
- not:
hasLabel:
label:Area-Interop
- not:
hasLabel:
label:Area-Output
- not:
hasLabel:
label:Area-Performance
- not:
hasLabel:
label:Area-Rendering
- not:
hasLabel:
label:Area-Server
- not:
hasLabel:
label:Area-Settings
- not:
hasLabel:
label:Area-TerminalConnection
- not:
hasLabel:
label:Area-TerminalControl
- not:
hasLabel:
label:Area-User Interface
- not:
hasLabel:
label:Area-VT
- not:
hasLabel:
label:Area-CodeHealth
- not:
hasLabel:
label:Area-Quality
- not:
hasLabel:
label:Area-AzureShell
- not:
hasLabel:
label:Area-Schema
- not:
hasLabel:
label:Area-Commandline
- not:
hasLabel:
label:Area-ShellExtension
- not:
hasLabel:
label:Area-WPFControl
- not:
hasLabel:
label:Area-Settings UI
- not:
hasLabel:
label:Area-DefApp
- not:
hasLabel:
label:Area-Remoting
- not:
hasLabel:
label:Area-Windowing
- not:
hasLabel:
label:Area-Theming
- not:
hasLabel:
label:Area-Localization
- and:
- not:
hasLabel:
label:Issue-Bug
- not:
hasLabel:
label:Issue-Docs
- not:
hasLabel:
label:Issue-Feature
- not:
hasLabel:
label:Issue-Question
- not:
hasLabel:
label:Issue-Samples
- not:
hasLabel:
label:Issue-Task
- not:
hasLabel:
label:Issue-Scenario
- and:
- not:
hasLabel:
label:Product-Cmd.exe
- not:
hasLabel:
label:Product-Colortool
- not:
hasLabel:
label:Product-Conhost
- not:
hasLabel:
label:Product-Conpty
- not:
hasLabel:
label:Product-Meta
- not:
hasLabel:
label:Product-Powershell
- not:
hasLabel:
label:Product-Terminal
- not:
hasLabel:
label:Product-WSL
- and:
- not:isOpen
- and:
- not:
hasLabel:
label:Resolution-Answered
- not:
hasLabel:
label:Resolution-By-Design
- not:
hasLabel:
label:Resolution-Duplicate
- not:
hasLabel:
label:Resolution-External
- not:
hasLabel:
label:Resolution-Fix-Available
- not:
hasLabel:
label:Resolution-Fix-Committed
- not:
hasLabel:
label:Resolution-Won't-Fix
- not:
hasLabel:
label:Needs-Triage
- not:
hasLabel:
label:Resolution-Duplicate
- not:
hasLabel:
label:⛺ Reserved
- not:
hasLabel:
label:Tracking-External
then:
- addLabel:
label:Needs-Tag-Fix
description:
- if:
- payloadType:Issues
- and:
- isLabeled
- hasLabel:
label:Needs-Tag-Fix
- and:
- or:
- hasLabel:
label:Area-Accessibility
- hasLabel:
label:Area-Build
- hasLabel:
label:Area-Extensibility
- hasLabel:
label:Area-Fonts
- hasLabel:
label:Area-Input
- hasLabel:
label:Area-Interaction
- hasLabel:
label:Area-Interop
- hasLabel:
label:Area-Output
- hasLabel:
label:Area-Performance
- hasLabel:
label:Area-Rendering
- hasLabel:
label:Area-Server
- hasLabel:
label:Area-Settings
- hasLabel:
label:Area-TerminalConnection
- hasLabel:
label:Area-TerminalControl
- hasLabel:
label:Area-User Interface
- hasLabel:
label:Area-VT
- hasLabel:
label:Area-CodeHealth
- hasLabel:
label:Area-Quality
- hasLabel:
label:Area-Schema
- hasLabel:
label:Area-AzureShell
- hasLabel:
label:Area-Commandline
- hasLabel:
label:Area-ShellExtension
- hasLabel:
label:Area-WPFControl
- hasLabel:
label:Area-Settings UI
- hasLabel:
label:Area-DefApp
- hasLabel:
label:Area-Localization
- hasLabel:
label:Area-Windowing
- hasLabel:
label:Area-Theming
- hasLabel:
label:Area-AtlasEngine
- hasLabel:
label:Area-CmdPal
- or:
- hasLabel:
label:Issue-Bug
- hasLabel:
label:Issue-Docs
- hasLabel:
label:Issue-Feature
- hasLabel:
label:Issue-Question
- hasLabel:
label:Issue-Samples
- hasLabel:
label:Issue-Task
- hasLabel:
label:Issue-Scenario
- or:
- hasLabel:
label:Product-Cmd.exe
- hasLabel:
label:Product-Colortool
- hasLabel:
label:Product-Conhost
- hasLabel:
label:Product-Conpty
- hasLabel:
label:Product-Meta
- hasLabel:
label:Product-Powershell
- hasLabel:
label:Product-Terminal
- hasLabel:
label:Product-WSL
- or:
- isOpen
- and:
- not:isOpen
- or:
- hasLabel:
label:Resolution-Answered
- hasLabel:
label:Resolution-By-Design
- hasLabel:
label:Resolution-Duplicate
- hasLabel:
label:Resolution-External
- hasLabel:
label:Resolution-Fix-Available
- hasLabel:
label:Resolution-Fix-Committed
- hasLabel:
label:Resolution-Won't-Fix
- hasLabel:
label:Tracking-External
then:
- removeLabel:
label:Needs-Tag-Fix
description:
- if:
- payloadType:Pull_Request
then:
- inPrLabel:
label:In-PR
description:
- if:
- payloadType:Issues
- hasLabel:
label:Needs-Tag-Fix
- hasLabel:
label:Resolution-Duplicate
then:
- removeLabel:
label:Needs-Tag-Fix
description:
- if:
- payloadType:Issues
- or:
- titleContains:
pattern:^\s*Bug Report \(IF I DO NOT CHANGE THIS THE ISSUE WILL BE AUTO-CLOSED\)\s*$
isRegex:True
- titleContains:
pattern:^\s*Bug Report\s*$
isRegex:True
- or:
- isAction:
action:Opened
- isAction:
action:Reopened
- not:
activitySenderHasPermission:
permission:Write
- not:
activitySenderHasPermission:
permission:Admin
then:
- closeIssue
- addLabel:
label:Needs-Author-Feedback
- addReply:
reply:Hi! Thanks for attempting to open an issue. Unfortunately, your title wasn't changed from the original template which makes it very hard for us to track and triage. You are welcome to fix up the title and try again with a new issue.
description:
- if:
- payloadType:Issues
- or:
- isAction:
action:Opened
- isAction:
action:Reopened
- or:
- not:
bodyContains:
pattern:.+
isRegex:True
then:
- closeIssue
- addLabel:
label:Needs-Author-Feedback
- addReply:
reply:"Hi! Thanks for attempting to open an issue. Unfortunately, you didn't write anything in the body which makes it impossible to understand your concern. You are welcome to fix up the issue and try again by opening another issue with the body filled out. "
description:
- if:
- payloadType:Pull_Request
- isLabeled
- hasLabel:
label:Needs-Second
- isOpen
then:
- requestReview:
reviewer:zadjii-msft
- requestReview:
reviewer:PankajBhojwani
- requestReview:
reviewer:carlos-zamora
- requestReview:
reviewer:dhowett
- requestReview:
reviewer:lhecker
description:
- if:
- payloadType:Pull_Request_Review
- not:isOpen
- hasLabel:
label:Needs-Second
then:
- removeLabel:
label:Needs-Second
description:
- if:
- payloadType:Issues
- hasLabel:
label:In-PR
- hasLabel:
label:Help Wanted
- isLabeled
then:
- removeLabel:
label:Help-Wanted
description:
- if:
- payloadType:Issue_Comment
- commentContains:
pattern:'\/dup(licate|e)?(\s+of)?\s+\#[\d]+'
isRegex:True
- or:
- activitySenderHasPermission:
permission:Admin
- activitySenderHasPermission:
permission:Write
then:
- addReply:
reply:Hi! We've identified this issue as a duplicate of another one that already exists on this Issue Tracker. This specific instance is being closed in favor of tracking the concern over on the referenced thread. Thanks for your report!
- closeIssue
- removeLabel:
label:Needs-Triage
- addLabel:
label:Resolution-Duplicate
- removeLabel:
label:Needs-Tag-Fix
- removeLabel:
label:Needs-Attention
- removeLabel:
label:Needs-Author-Feedback
- removeLabel:
label:Needs-Repro
- removeLabel:
label:Needs-Second
description:
- if:
- payloadType:Issue_Comment
- commentContains:
pattern:'\/feedback'
isRegex:True
- or:
- activitySenderHasPermission:
permission:Admin
- activitySenderHasPermission:
permission:Write
then:
- addReply:
reply:>2-
Hi there!<br><br>Can you please send us feedback with the [Feedback Hub](https://support.microsoft.com/en-us/windows/send-feedback-to-microsoft-with-the-feedback-hub-app-f59187f8-8739-22d6-ba93-f66612949332) with this issue? Make sure to click the "Start recording" button, then reproduce the issue before submitting the feedback. Once it's submitted, paste the link here so we can more easily find your crash information on the back end?<br><br>Thanks!<br><br><br><br><br><br>
- addLabel:
label:Needs-Author-Feedback
description:
- if:
- payloadType:Issue_Comment
then:
- cleanEmailReply
description:
- if:
- payloadType:Pull_Request
then:
- labelSync:
pattern:Issue-
- labelSync:
pattern:Area-
- labelSync:
pattern:Priority-
- labelSync:
pattern:Product-
- labelSync:
pattern:Severity-
- labelSync:
pattern:Impact-
description:
- if:
- payloadType:Issue_Comment
- commentContains:
pattern:'\/dup(licate|e)?(\s+of)?\s+https'
isRegex:True
- or:
- activitySenderHasPermission:
permission:Admin
- activitySenderHasPermission:
permission:Write
then:
- addReply:
reply:Hi! We've identified this issue as a duplicate of one that exists on somebody else's Issue Tracker. Please make sure you subscribe to the referenced external issue for future updates. Thanks for your report!
This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
This project has adopted the [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/).
@@ -14,7 +14,7 @@ The point of doing all this work in public is to ensure that we are holding ours
The team triages new issues several times a week. During triage, the team uses labels to categorize, manage, and drive the project workflow.
We employ [a bot engine](https://github.com/microsoft/terminal/blob/master/doc/bot.md) to help us automate common processes within our workflow.
We employ [a bot engine](./doc/bot.md) to help us automate common processes within our workflow.
We drive the bot by tagging issues with specific labels which cause the bot engine to close issues, merge branches, etc. This bot engine helps us keep the repo clean by automating the process of notifying appropriate parties if/when information/follow-up is needed, and closing stale issues/PRs after reminders have remained unanswered for several days.
@@ -23,7 +23,7 @@ Therefore, if you do file issues, or create PRs, please keep an eye on your GitH
---
## Reporting Security Issues
**Please do not report security vulnerabilities through public GitHub issues.** Instead, please report them to the Microsoft Security Response Center (MSRC). See [Security.md](../SECURITY.md) for more information.
**Please do not report security vulnerabilities through public GitHub issues.** Instead, please report them to the Microsoft Security Response Center (MSRC). See [SECURITY.md](./SECURITY.md) for more information.
## Before you start, file an issue
@@ -43,7 +43,7 @@ If no existing item describes your issue/feature, great - please file a new issu
* Have a question that you don't see answered in docs, videos, etc.? File an issue
* Want to know if we're planning on building a particular feature? File an issue
* Got a great idea for a new feature? File an issue/request/idea
* Don't understand how to do something? File an issue/Community Guidance Request
* Don't understand how to do something? File an issue
* Found an existing issue that describes yours? Great - upvote and add additional commentary / info / repro-steps / etc.
When you hit "New Issue", select the type of issue closest to what you want to report/ask/request:
@@ -81,7 +81,7 @@ When you hit "New Issue", select the type of issue closest to what you want to r
Microsoft Windows [Version 10.0.18900.1001]
```
* What tools and apps you're using (e.g. VS 2019, VSCode, etc.)
* What tools and apps you're using (e.g. VS 2022, VSCode, etc.)
* Don't assume we're experts in setting up YOUR environment and don't assume we are experts in `<your distro/tool of choice>`. Teach us to help you!
* **We LOVE detailed repro steps!** What steps do we need to take to reproduce the issue? Assume we love to read repro steps. As much detail as you can stand is probably _barely_ enough detail for us!
* If you're reporting a particular character/glyph not rendering correctly, the specific Unicode codepoint would be MOST welcome (e.g. U+1F4AF, U+4382)
@@ -99,25 +99,39 @@ If you don't have any additional info/context to add but would like to indicate
## Contributing fixes / features
For those able & willing to help fix issues and/or implement features ...
If you're able & willing to help fix issues and/or implement features, we'd love your contribution!
The best place to start is the list of ["walkthroughs"](https://aka.ms/terminal-walkthroughs). This is a collection of issues where we've written a "walkthrough", little guides to help get started with a particular issue. These are usually good first issues, and are a great way to get familiar with the codebase. Additionally, the list of ["good first issue"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22++label%3A%22good+first+issue%22+)s is another set of issues that might be easier for first-time contributors. Once you're feeling more comfortable in the codebase, feel free to just use the ["Help Wanted"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Help+Wanted%22+) label, or just find any issue you're interested in and hop in!
Generally, we categorize issues in the following way, which is largely derived from our old internal work tracking system:
* ["Bugs"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Bug%22+) are parts of the Terminal & Console that are not quite working the right way. There's code to already support some scenario, but it's not quite working right. Fixing these is generally a matter of debugging the broken functionality and fixing the wrong code.
* ["Tasks"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Task%22+) are usually new pieces of functionality that aren't yet implemented for the Terminal/Console. These are usually smaller features, which we believe
- could be a single, atomic PR
- Don't require much design consideration, or we've already written the spec for the larger feature they belong to.
* ["Features"](https://github.com/microsoft/terminal/issues?q=is%3Aopen+is%3Aissue+label%3A%22Issue-Feature%22+) are larger pieces of new functionality. These are usually things we believe would require larger discussion of how they should be implemented, or they'll require some complicated new settings. They might just be features that are composed of many individual tasks. Often times, with features, we like to have a spec written before development work is started, to make sure we're all on the same page (see below).
Bugs and tasks are obviously the easiest to get started with, but don't feel afraid of features either! We've had some community members contribute some amazing "feature"-level work to the Terminal (albeit, with lots of discussion 😄).
Often, we like to assign issues that generally belong to somebody's area of expertise to the team member that owns that area. This doesn't mean the community can't jump in -- they should reach out and have a chat with the assignee to see if it'd okay to take. If an issue's been assigned more than a month ago, there's a good chance it's fair game to try yourself.
### To Spec or not to Spec
Some issues/features may be quick and simple to describe and understand. For such scenarios, once a team member has agreed with your approach, skip ahead to the section headed "Fork, Branch, and Create your PR", below.
Small issues that do not require a spec will be labelled Issue-Bug or Issue-Task.
Small issues that do not require a spec will be labelled `Issue-Bug` or `Issue-Task`.
However, some issues/features will require careful thought & formal design before implementation. For these scenarios, we'll request that a spec is written and the associated issue will be labeled Issue-Feature.
However, some issues/features will require careful thought & formal design before implementation. For these scenarios, we'll request that a spec is written and the associated issue will be labeled `Issue-Feature`. More often than not, we'll add such features to the ["Specification Tracker" project](https://github.com/microsoft/terminal/projects/1).
Specs help collaborators discuss different approaches to solve a problem, describe how the feature will behave, how the feature will impact the user, what happens if something goes wrong, etc. Driving towards agreement in a spec, before any code is written, often results in simpler code, and less wasted effort in the long run.
Specs will be managed in a very similar manner as code contributions so please follow the "Fork, Branch and Create your PR" below.
Specs will be managed in a very similar manner as code contributions so please follow the "[Fork, Branch and Create your PR](CONTRIBUTING.md#fork-clone-branch-and-create-your-pr)" section below.
### Writing / Contributing-to a Spec
To write/contribute to a spec: fork, branch and commit via PRs, as you would with any code changes.
Specs are written in markdown, stored under the `\doc\spec` folder and named `[issue id] - [spec description].md`.
Specs are written in markdown, stored under the [`\doc\specs`](./doc/specs) folder and named `[issue id] - [spec description].md`.
👉 **It is important to follow the spec templates and complete the requested information**. The available spec templates will help ensure that specs contain the minimum information & decisions necessary to permit development to begin. In particular, specs require you to confirm that you've already discussed the issue/idea with the team in an issue and that you provide the issue ID for reference.
@@ -125,7 +139,7 @@ Team members will be happy to help review specs and guide them to completion.
### Help Wanted
Once the team have approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help-Wanted).
Once the team has approved an issue/spec, development can proceed. If no developers are immediately available, the spec can be parked ready for a developer to get started. Parked specs' issues will be labeled "Help Wanted". To find a list of development opportunities waiting for developer involvement, visit the Issues and filter on [the Help-Wanted label](https://github.com/microsoft/terminal/labels/Help%20Wanted).
---
@@ -140,6 +154,13 @@ Once you've discussed your proposed feature/fix/etc. with a team member, and you
1. Create & push a feature branch
1. Create a [Draft Pull Request (PR)](https://github.blog/2019-02-14-introducing-draft-pull-requests/)
1. Work on your changes
1. Build and see if it works. Consult [How to build OpenConsole](./doc/building.md) if you have problems.
### Testing
Testing is a key component in the development workflow. Both Windows Terminal and Windows Console use TAEF(the Test Authoring and Execution Framework) as the main framework for testing.
If your changes affect existing test cases, or you're working on brand new features and also the accompanying test cases, see [TAEF](./doc/TAEF.md) for more information about how to validate your work locally.
### Code Review
@@ -149,10 +170,10 @@ When you'd like the team to take a look, (even if the work is not yet fully-comp
### Merge
Once your code has been reviewed and approved by the requisite number of team members, it will be merged into the master branch. Once merged, your PR will be automatically closed.
Once your code has been reviewed and approved by the requisite number of team members, it will be merged into the main branch. Once merged, your PR will be automatically closed.
---
## Thank you
Thank you in advance for your contribution! Now, [what's next on the list](https://github.com/microsoft/terminal/labels/Help-Wanted)? 😜
Thank you in advance for your contribution! Now, [what's next on the list](https://github.com/microsoft/terminal/labels/Help%20Wanted)? 😜
> 👉 Note: Windows Terminal requires Windows 10 1903 (build 18362) or later
> [!NOTE]
> Windows Terminal requires Windows 10 2004 (build 19041) or later
### Manually installing builds from this repository
### Microsoft Store [Recommended]
For users who are unable to install Terminal from the Microsoft Store, Terminal builds can be manually downloaded from this repository's [Releases page](https://github.com/microsoft/terminal/releases).
Install the [Windows Terminal from the Microsoft Store][store-install-link].
This allows you to always be on the latest version when we release new builds
with automatic upgrades.
> ⚠ Note: If you install Terminal manually:
This is our preferred method.
### Other install methods
#### Via GitHub
For users who are unable to install Windows Terminal from the Microsoft Store,
released builds can be manually downloaded from this repository's [Releases
> * Be sure to install the [Desktop Bridge VC++ v14 Redistributable Package](https://www.microsoft.com/en-us/download/details.aspx?id=53175) otherwise Terminal may not installand/or run and may crash at startup
> * Terminal will not auto-update when new builds are released so you will need to regularly install the latest Terminal release to receive all the latest fixes and improvements!
> * You may need to install the [VC++ v14 Desktop Framework Package](https://docs.microsoft.com/troubleshoot/cpp/c-runtime-packages-desktop-bridge#how-to-install-and-update-desktop-framework-packages).
> This should only be necessary on older builds of Windows 10 and only if you get an error about missing framework packages.
> * Terminal will not auto-update when new builds are released so you will need
> to regularly install the latest Terminal release to receive all the latest
> fixes and improvements!
### Install via Chocolatey (unofficial)
#### Via Windows Package Manager CLI (aka winget)
[Chocolatey](https://chocolatey.org) users can download and install the latest Terminal release by installing the `microsoft-windows-terminal` package:
[winget](https://github.com/microsoft/winget-cli) users can download and install
the latest Terminal release by installing the `Microsoft.WindowsTerminal`
package:
```powershell
wingetinstall--idMicrosoft.WindowsTerminal-e
```
> [!NOTE]
> Dependency support is available in WinGet version [1.6.2631 or later](https://github.com/microsoft/winget-cli/releases). To install the Terminal stable release 1.18 or later, please make sure you have the updated version of the WinGet client.
#### Via Chocolatey (unofficial)
[Chocolatey](https://chocolatey.org) users can download and install the latest
Terminal release by installing the `microsoft-windows-terminal` package:
```powershell
chocoinstallmicrosoft-windows-terminal
@@ -40,72 +90,166 @@ To upgrade Windows Terminal using Chocolatey, run the following:
chocoupgrademicrosoft-windows-terminal
```
If you have any issues when installing/upgrading the package please go to the [Windows Terminal package page](https://chocolatey.org/packages/microsoft-windows-terminal) and follow the [Chocolatey triage process](https://chocolatey.org/docs/package-triage-process)
If you have any issues when installing/upgrading the package please go to the
[Windows Terminal package
page](https://chocolatey.org/packages/microsoft-windows-terminal) and follow the
[Scoop](https://scoop.sh) users can download and install the latest Terminal
release by installing the `windows-terminal` package:
```powershell
scoopbucketaddextras
scoopinstallwindows-terminal
```
To update Windows Terminal using Scoop, run the following:
```powershell
scoopupdatewindows-terminal
```
If you have any issues when installing/updating the package, please search for
or report the same on the [issues
page](https://github.com/lukesampson/scoop-extras/issues) of Scoop Extras bucket
repository.
---
## Installing Windows Terminal Canary
Windows Terminal Canary is a nightly build of Windows Terminal. This build has the latest code from our `main` branch, giving you an opportunity to try features before they make it to Windows Terminal Preview.
Windows Terminal Canary is our least stable offering, so you may discover bugs before we have had a chance to find them.
Windows Terminal Canary is available as an App Installer distribution and a Portable ZIP distribution.
The App Installer distribution supports automatic updates. Due to platform limitations, this installer only works on Windows 11.
The Portable ZIP distribution is a portable application. It will not automatically update and will not automatically check for updates. This portable ZIP distribution works on Windows 10 (19041+) and Windows 11.
Please take a few minutes to review the overview below before diving into the code:
Please take a few minutes to review the overview below before diving into the
code:
### Windows Terminal
Windows Terminal is a new, modern, feature-rich, productive terminal application for command-line users. It includes many of the features most frequently requested by the Windows command-line community including support for tabs, rich text, globalization, configurability, theming & styling, and more.
Windows Terminal is a new, modern, feature-rich, productive terminal application
for command-line users. It includes many of the features most frequently
requested by the Windows command-line community including support for tabs, rich
text, globalization, configurability, theming & styling, and more.
The Terminal will also need to meet our goals and measures to ensure it remains fast and efficient, and doesn't consume vast amounts of memory or power.
The Terminal will also need to meet our goals and measures to ensure it remains
fast and efficient, and doesn't consume vast amounts of memory or power.
### The Windows Console Host
The Windows Console host, `conhost.exe`, is Windows' original command-line user experience. It also hosts Windows' command-line infrastructure and the Windows Console API server, input engine, rendering engine, user preferences, etc. The console host code in this repository is the actual source from which the `conhost.exe` in Windows itself is built.
The Windows Console host, `conhost.exe`, is Windows' original command-line user
experience. It also hosts Windows' command-line infrastructure and the Windows
Console API server, input engine, rendering engine, user preferences, etc. The
console host code in this repository is the actual source from which the
`conhost.exe` in Windows itself is built.
Since taking ownership of the Windows command-line in 2014, the team added several new features to the Console, including background transparency, line-based selection, support for [ANSI / Virtual Terminal sequences](https://en.wikipedia.org/wiki/ANSI_escape_code), [24-bit color](https://devblogs.microsoft.com/commandline/24-bit-color-in-the-windows-console/), a [Pseudoconsole ("ConPTY")](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/), and more.
Since taking ownership of the Windows command-line in 2014, the team added
several new features to the Console, including background transparency,
line-based selection, support for [ANSI / Virtual Terminal
However, because Windows Console's primary goal is to maintain backward compatibility, we have been unable to add many of the features the community (and the team) have been wanting for the last several years including tabs, unicode text, and emoji.
However, because Windows Console's primary goal is to maintain backward
compatibility, we have been unable to add many of the features the community
(and the team) have been wanting for the last several years including tabs,
unicode text, and emoji.
These limitations led us to create the new Windows Terminal.
> You can read more about the evolution of the command-line in general, and the Windows command-line specifically in [this accompanying series of blog posts](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/) on the Command-Line team's blog.
> You can read more about the evolution of the command-line in general, and the
> Windows command-line specifically in [this accompanying series of blog
While overhauling Windows Console, we modernized its codebase considerably, cleanly separating logical entities into modules and classes, introduced some key extensibility points, replaced several old, home-grown collections and containers with safer, more efficient [STL containers](https://docs.microsoft.com/en-us/cpp/standard-library/stl-containers?view=vs-2019), and made the code simpler and safer by using Microsoft's [Windows Implementation Libraries - WIL](https://github.com/Microsoft/wil).
While overhauling Windows Console, we modernized its codebase considerably,
cleanly separating logical entities into modules and classes, introduced some
key extensibility points, replaced several old, home-grown collections and
This overhaul resulted in several of Console's key components being available for re-use in any terminal implementation on Windows. These components include a new DirectWrite-based text layout and rendering engine, a text buffer capable of storing both UTF-16 and UTF-8, a VT parser/emitter, and more.
This overhaul resulted in several of Console's key components being available
for re-use in any terminal implementation on Windows. These components include a
new DirectWrite-based text layout and rendering engine, a text buffer capable of
storing both UTF-16 and UTF-8, a VT parser/emitter, and more.
### Creating the new Windows Terminal
When we started planning the new Windows Terminal application, we explored and evaluated several approaches and technology stacks. We ultimately decided that our goals would be best met by continuing our investment in our C++ codebase, which would allow us to reuse several of the aforementioned modernized components in both the existing Console and the new Terminal. Further, we realized that this would allow us to build much of the Terminal's core itself as a reusable UI control that others can incorporate into their own applications.
When we started planning the new Windows Terminal application, we explored and
evaluated several approaches and technology stacks. We ultimately decided that
our goals would be best met by continuing our investment in our C++ codebase,
which would allow us to reuse several of the aforementioned modernized
components in both the existing Console and the new Terminal. Further, we
realized that this would allow us to build much of the Terminal's core itself as
a reusable UI control that others can incorporate into their own applications.
The result of this work is contained within this repo and delivered as the Windows Terminal application you can download from the Microsoft Store, or [directly from this repo's releases](https://github.com/microsoft/terminal/releases).
The result of this work is contained within this repo and delivered as the
Windows Terminal application you can download from the Microsoft Store, or
* [Command-Line Backgrounder Blog Series](https://devblogs.microsoft.com/commandline/windows-command-line-backgrounder/)
* Windows Terminal Launch: [Terminal "Sizzle Video"](https://www.youtube.com/watch?v=8gw0rXPMMPE&list=PLEHMQNlPj-Jzh9DkNpqipDGCZZuOwrQwR&index=2&t=0s)
* Windows Terminal Launch: [Build 2019 Session](https://www.youtube.com/watch?v=KMudkRcwjCw)
* Run As Radio: [Show 645 - Windows Terminal with Richard Turner](http://www.runasradio.com/Shows/Show/645)
*Azure Devops Podcast: [Episode 54 - Kayla Cinnamon and Rich Turner on DevOps on the Windows Terminal](http://azuredevopspodcast.clear-measure.com/kayla-cinnamon-and-rich-turner-on-devops-on-the-windows-terminal-team-episode-54)
* Microsoft Ignite 2019 Session: [The Modern Windows Command Line: Windows Terminal - BRK3321](https://myignite.techcommunity.microsoft.com/sessions/81329?source=sessions)
@@ -115,63 +259,91 @@ For more information about Windows Terminal, you may find some of these resource
Cause: You're launching the incorrect solution in Visual Studio.
Solution: Make sure you're building & deploying the `CascadiaPackage` project in Visual Studio.
Solution: Make sure you're building & deploying the `CascadiaPackage` project in
Visual Studio.
> ⚠ Note: `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic Windows Console that hosts Windows' command-line infrastructure. OpenConsole is used by Windows Terminal to connect to and communicate with command-line applications (via [ConPty](https://devblogs.microsoft.com/commandline/windows-command-line-introducing-the-windows-pseudo-console-conpty/)).
> [!NOTE]
> `OpenConsole.exe` is just a locally-built `conhost.exe`, the classic
> Windows Console that hosts Windows' command-line infrastructure. OpenConsole
> is used by Windows Terminal to connect to and communicate with command-line
We are excited to work alongside you, our amazing community, to build and enhance Windows Terminal\!
We are excited to work alongside you, our amazing community, to build and
enhance Windows Terminal\!
***BEFORE you start work on a feature/fix***, please read & follow our [Contributor's Guide](https://github.com/microsoft/terminal/blob/master/contributing.md) to help avoid any wasted or duplicate effort.
***BEFORE you start work on a feature/fix***, please read & follow our
[Contributor's
Guide](./CONTRIBUTING.md) to
help avoid any wasted or duplicate effort.
## Communicating with the Team
The easiest way to communicate with the team is via GitHub issues.
Please file new issues, feature requests and suggestions, but **DO search for similar open/closed pre-existing issues before creating a new issue.**
Please file new issues, feature requests and suggestions, but **DO search for
similar open/closed preexisting issues before creating a new issue.**
If you would like to ask a question that you feel doesn't warrant an issue (yet), please reach out to us via Twitter:
If you would like to ask a question that you feel doesn't warrant an issue
(yet), please reach out to us via Twitter:
*Kayla Cinnamon, Program Manager: [@cinnamon\_msft](https://twitter.com/cinnamon_msft)
* Rich Turner, Program Manager: [@richturn\_ms](https://twitter.com/richturn_ms)
* Leonard Hecker, Developer: [@LeonardHecker](https://twitter.com/LeonardHecker)
## Developer Guidance
## Prerequisites
* You must be running Windows 1903 (build >= 10.0.18362.0) or later to run Windows Terminal
* You must [enable Developer Mode in the Windows Settings app](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development) to locally install and run Windows Terminal
* You must have the [Windows 10 1903 SDK](https://developer.microsoft.com/en-us/windows/downloads/windows-10-sdk) installed
* You must have at least [VS 2019](https://visualstudio.microsoft.com/downloads/) installed
* You must install the following Workloads via the VS Installer. Note: Opening the solution in VS 2019 will [prompt you to install missing components automatically](https://devblogs.microsoft.com/setup/configure-visual-studio-across-your-organization-with-vsconfig/):
* You must be running Windows 10 2004 (build >= 10.0.19041.0) or later to run
Windows Terminal
* You must [enable Developer Mode in the Windows Settings
* You must install the [.NET Framework Targeting Pack](https://docs.microsoft.com/dotnet/framework/install/guide-for-developers#to-install-the-net-framework-developer-pack-or-targeting-pack) to build test projects
## Building the Code
This repository uses [git submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its dependencies. To make sure submodules are restored or updated, be sure to run the following prior to building:
This repository uses [git
submodules](https://git-scm.com/book/en/v2/Git-Tools-Submodules) for some of its
dependencies. To make sure submodules are restored or updated, be sure to run
the following prior to building:
```shell
git submodule update --init --recursive
```
OpenConsole.sln may be built from within Visual Studio or from the command-line using a set of convenience scripts & tools in the **/tools** directory:
OpenConsole.sln may be built from within Visual Studio or from the command-line
using a set of convenience scripts & tools in the **/tools** directory:
### Building in PowerShell
@@ -190,32 +362,46 @@ bcz
## Running & Debugging
To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the Solution Explorer) and go to properties. In the Debug menu, change "Application process" and "Background task process" to "Native Only".
To debug the Windows Terminal in VS, right click on `CascadiaPackage` (in the
Solution Explorer) and go to properties. In the Debug menu, change "Application
process" and "Background task process" to "Native Only".
You should then be able to build & debug the Terminal project by hitting <kbd>F5</kbd>.
You should then be able to build & debug the Terminal project by hitting
<kbd>F5</kbd>. Make sure to select either the "x64" or the "x86" platform - the
Terminal doesn't build for "Any Cpu" (because the Terminal is a C++ application,
not a C# one).
> 👉 You will _not_ be able to launch the Terminal directly by running the WindowsTerminal.exe. For more details on why, see [#926](https://github.com/microsoft/terminal/issues/926), [#4043](https://github.com/microsoft/terminal/issues/4043)
> 👉 You will _not_ be able to launch the Terminal directly by running the
> WindowsTerminal.exe. For more details on why, see
Please review these brief docs below about our coding practices.
> 👉 If you find something missing from these docs, feel free to contribute to any of our documentation files anywhere in the repository (or write some new ones!)
> 👉 If you find something missing from these docs, feel free to contribute to
> any of our documentation files anywhere in the repository (or write some new
> ones!)
This is a work in progress as we learn what we'll need to provide people in order to be effective contributors to our project.
This is a work in progress as we learn what we'll need to provide people in
order to be effective contributors to our project.
* [Exceptions in our legacy codebase](https://github.com/Microsoft/Terminal/blob/master/doc/EXCEPTIONS.md)
* [Helpful smart pointers and macros for interfacing with Windows in WIL](https://github.com/Microsoft/Terminal/blob/master/doc/WIL.md)
* [Coding Style](./doc/STYLE.md)
* [Code Organization](./doc/ORGANIZATION.md)
* [Exceptions in our legacy codebase](./doc/EXCEPTIONS.md)
* [Helpful smart pointers and macros for interfacing with Windows in WIL](./doc/WIL.md)
---
# Code of Conduct
## Code of Conduct
This project has adopted the [Microsoft Open Source Code of Conduct][conduct-code].
For more information see the [Code of Conduct FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any additional questions or comments.
This project has adopted the [Microsoft Open Source Code of
Conduct][conduct-code]. For more information see the [Code of Conduct
FAQ][conduct-FAQ] or contact [opencode@microsoft.com][conduct-email] with any
This project uses [GitHub issues][gh-issue] to [track bugs][gh-bug] and [feature requests][gh-feature]. Please search the existing issues before filing new issues to avoid duplicates. For new topics, file your bug or feature request as a new issue.
For help and questions about using this project, please look at the [docs site for Windows Terminal][docs] and our [Contributor's Guide][contributor] if you want to work on Windows Terminal.
## Microsoft Support Policy
Support for Windows Terminal is limited to the resources listed above.
<!-- Mandatory. Major version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<!-- Mandatory. Minor version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<!-- Mandatory, defaults to 0. Patch version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<!-- Optional, defaults to empty. Prerelease version number of the PGO database which should match the version of the product. This can be hard-coded or obtained from other sources in build system. -->
<!-- Copying the PGO runtime brings along a CRT. If we do that under normal circumstances, WAPPROJ will get its grubby hands on it and mess up all the CRT shenanigans we have to pull to make MSIX packages happy. So only pull it in for Instrument builds.-->
# Without this, OneBranch will nerf our symbol tasks
ob_symbolsPublishing_enabled:true
- ${{ parameters.extraPublishJobs }}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
